[PATCH AUTOSEL 6.0 01/39] arm64: dts: rockchip: Fix gmac failure of rgmii-id from rk3566-roc-pc

[PATCH AUTOSEL 6.0 01/39] arm64: dts: rockchip: Fix gmac failure of rgmii-id from rk3566-roc-pc

[Sasha Levin]

From: Furkan Kardame <f.kardame@manjaro.org>

[ Upstream commit adbab347ec8861aa80d850693df3cd005ec65a99 ]

Lan does not work on rgmii-id, most rk356x devices lan
is being switched to rgmii.

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-2-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 57759b66d44d..8db83088ae4e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -130,7 +130,7 @@ &gmac1 {
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
 	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
 	clock_in_out = "input";
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m0_miim
-- 
2.35.1

[PATCH AUTOSEL 6.0 01/39] arm64: dts: rockchip: Fix gmac failure of rgmii-id from rk3566-roc-pc

[Sasha Levin]

From: Furkan Kardame <f.kardame@manjaro.org>

[ Upstream commit adbab347ec8861aa80d850693df3cd005ec65a99 ]

Lan does not work on rgmii-id, most rk356x devices lan
is being switched to rgmii.

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-2-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 57759b66d44d..8db83088ae4e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -130,7 +130,7 @@ &gmac1 {
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
 	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
 	clock_in_out = "input";
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m0_miim
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 01/39] arm64: dts: rockchip: Fix gmac failure of rgmii-id from rk3566-roc-pc

[Sasha Levin]

From: Furkan Kardame <f.kardame@manjaro.org>

[ Upstream commit adbab347ec8861aa80d850693df3cd005ec65a99 ]

Lan does not work on rgmii-id, most rk356x devices lan
is being switched to rgmii.

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-2-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 57759b66d44d..8db83088ae4e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -130,7 +130,7 @@ &gmac1 {
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
 	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
 	clock_in_out = "input";
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1m0_miim
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 02/39] arm64: dts: rockchip: Fix i2c3 pinctrl on rk3566-roc-pc

[Sasha Levin]

From: Furkan Kardame <f.kardame@manjaro.org>

[ Upstream commit 2440ad0d851e404adcd1b9ad758f28bd59365bae ]

As per device schematic i2c3 pinctrl is connected to m0 instead of m1

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-3-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 8db83088ae4e..b8ed215ab8fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -397,7 +397,7 @@ &i2c2 {
 
 &i2c3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3m1_xfer>;
+	pinctrl-0 = <&i2c3m0_xfer>;
 	status = "okay";
 };
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 02/39] arm64: dts: rockchip: Fix i2c3 pinctrl on rk3566-roc-pc

[Sasha Levin]

From: Furkan Kardame <f.kardame@manjaro.org>

[ Upstream commit 2440ad0d851e404adcd1b9ad758f28bd59365bae ]

As per device schematic i2c3 pinctrl is connected to m0 instead of m1

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-3-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 8db83088ae4e..b8ed215ab8fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -397,7 +397,7 @@ &i2c2 {
 
 &i2c3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3m1_xfer>;
+	pinctrl-0 = <&i2c3m0_xfer>;
 	status = "okay";
 };
 
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 02/39] arm64: dts: rockchip: Fix i2c3 pinctrl on rk3566-roc-pc

[Sasha Levin]

From: Furkan Kardame <f.kardame@manjaro.org>

[ Upstream commit 2440ad0d851e404adcd1b9ad758f28bd59365bae ]

As per device schematic i2c3 pinctrl is connected to m0 instead of m1

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-3-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 8db83088ae4e..b8ed215ab8fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -397,7 +397,7 @@ &i2c2 {
 
 &i2c3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3m1_xfer>;
+	pinctrl-0 = <&i2c3m0_xfer>;
 	status = "okay";
 };
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 03/39] arm64: dts: rockchip: remove i2c5 from rk3566-roc-pc

[Sasha Levin]

From: Furkan Kardame <f.kardame@manjaro.org>

[ Upstream commit b44bc59d0d279fa4f3dc11b895f2c8f77719885d ]

i2c5 is owned by hdmi port

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-4-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index b8ed215ab8fb..ab1abf0bb749 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -401,10 +401,6 @@ &i2c3 {
 	status = "okay";
 };
 
-&i2c5 {
-	status = "okay";
-};
-
 &mdio1 {
 	rgmii_phy1: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-- 
2.35.1

[PATCH AUTOSEL 6.0 03/39] arm64: dts: rockchip: remove i2c5 from rk3566-roc-pc

[Sasha Levin]

From: Furkan Kardame <f.kardame@manjaro.org>

[ Upstream commit b44bc59d0d279fa4f3dc11b895f2c8f77719885d ]

i2c5 is owned by hdmi port

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-4-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index b8ed215ab8fb..ab1abf0bb749 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -401,10 +401,6 @@ &i2c3 {
 	status = "okay";
 };
 
-&i2c5 {
-	status = "okay";
-};
-
 &mdio1 {
 	rgmii_phy1: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 03/39] arm64: dts: rockchip: remove i2c5 from rk3566-roc-pc

[Sasha Levin]

From: Furkan Kardame <f.kardame@manjaro.org>

[ Upstream commit b44bc59d0d279fa4f3dc11b895f2c8f77719885d ]

i2c5 is owned by hdmi port

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-4-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index b8ed215ab8fb..ab1abf0bb749 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -401,10 +401,6 @@ &i2c3 {
 	status = "okay";
 };
 
-&i2c5 {
-	status = "okay";
-};
-
 &mdio1 {
 	rgmii_phy1: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 04/39] arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series

[Sasha Levin]

From: FUKAUMI Naoki <naoki@radxa.com>

[ Upstream commit 849c19d14940b87332d5d59c7fc581d73f2099fd ]

I2S1 pins are exposed on 40-pin header on Radxa ROCK Pi 4 series.
their default function is GPIO, so I2S1 need to be disabled.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220924112812.1219-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 401e1ae9d944..b045f74071e4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -491,7 +491,6 @@ i2s0_p0_0: endpoint {
 &i2s1 {
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	status = "okay";
 };
 
 &i2s2 {
-- 
2.35.1

[PATCH AUTOSEL 6.0 04/39] arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series

[Sasha Levin]

From: FUKAUMI Naoki <naoki@radxa.com>

[ Upstream commit 849c19d14940b87332d5d59c7fc581d73f2099fd ]

I2S1 pins are exposed on 40-pin header on Radxa ROCK Pi 4 series.
their default function is GPIO, so I2S1 need to be disabled.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220924112812.1219-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 401e1ae9d944..b045f74071e4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -491,7 +491,6 @@ i2s0_p0_0: endpoint {
 &i2s1 {
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	status = "okay";
 };
 
 &i2s2 {
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 04/39] arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series

[Sasha Levin]

From: FUKAUMI Naoki <naoki@radxa.com>

[ Upstream commit 849c19d14940b87332d5d59c7fc581d73f2099fd ]

I2S1 pins are exposed on 40-pin header on Radxa ROCK Pi 4 series.
their default function is GPIO, so I2S1 need to be disabled.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220924112812.1219-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 401e1ae9d944..b045f74071e4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -491,7 +491,6 @@ i2s0_p0_0: endpoint {
 &i2s1 {
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	status = "okay";
 };
 
 &i2s2 {
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 05/39] arm64: dts: rockchip: fix node name for hym8563 rtc

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 67a9aeef44e42b1ac2becf5e61eae0880f48d9db ]

Fix the node name for hym8563 in all arm64 rockchip devicetrees.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-r88.dts            | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts    | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 7f5bba0c6001..0e88e9592c1c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -208,7 +208,7 @@ vdd_cpu: syr827@40 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 38d757c00548..e147d6f8b43e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -192,7 +192,7 @@ vdd_cpu: syr827@40 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
index 5a2661ae0131..18b5050c6cd3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
@@ -98,7 +98,7 @@ &fusb0 {
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		interrupt-parent = <&gpio0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 935b8c68a71d..6c168566321b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -297,7 +297,7 @@ &i2c2 {
 	clock-frequency = <400000>;
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-- 
2.35.1

[PATCH AUTOSEL 6.0 05/39] arm64: dts: rockchip: fix node name for hym8563 rtc

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 67a9aeef44e42b1ac2becf5e61eae0880f48d9db ]

Fix the node name for hym8563 in all arm64 rockchip devicetrees.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-r88.dts            | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts    | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 7f5bba0c6001..0e88e9592c1c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -208,7 +208,7 @@ vdd_cpu: syr827@40 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 38d757c00548..e147d6f8b43e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -192,7 +192,7 @@ vdd_cpu: syr827@40 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
index 5a2661ae0131..18b5050c6cd3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
@@ -98,7 +98,7 @@ &fusb0 {
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		interrupt-parent = <&gpio0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 935b8c68a71d..6c168566321b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -297,7 +297,7 @@ &i2c2 {
 	clock-frequency = <400000>;
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 05/39] arm64: dts: rockchip: fix node name for hym8563 rtc

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 67a9aeef44e42b1ac2becf5e61eae0880f48d9db ]

Fix the node name for hym8563 in all arm64 rockchip devicetrees.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-r88.dts            | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts    | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 7f5bba0c6001..0e88e9592c1c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -208,7 +208,7 @@ vdd_cpu: syr827@40 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 38d757c00548..e147d6f8b43e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -192,7 +192,7 @@ vdd_cpu: syr827@40 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
index 5a2661ae0131..18b5050c6cd3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
@@ -98,7 +98,7 @@ &fusb0 {
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		interrupt-parent = <&gpio0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 935b8c68a71d..6c168566321b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -297,7 +297,7 @@ &i2c2 {
 	clock-frequency = <400000>;
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 06/39] arm: dts: rockchip: fix node name for hym8563 rtc

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 17b57beafccb4569accbfc8c11390744cf59c021 ]

Fix the node name for hym8563 in all arm rockchip devicetrees.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036-evb.dts          | 2 +-
 arch/arm/boot/dts/rk3288-evb-act8846.dts  | 2 +-
 arch/arm/boot/dts/rk3288-firefly.dtsi     | 2 +-
 arch/arm/boot/dts/rk3288-miqi.dts         | 2 +-
 arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 2a7e6624efb9..ea23ba98625e 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -31,7 +31,7 @@ phy0: ethernet-phy@0 {
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index be695b8c1f67..8a635c243127 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -54,7 +54,7 @@ vdd_gpu: syr828@41 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 052afe5543e2..9267857beccb 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -233,7 +233,7 @@ vdd_gpu: syr828@41 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 713f55e143c6..e3d5644f2915 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -162,7 +162,7 @@ vdd_gpu: syr828@41 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 80e0f07c8e87..07a3a52753d2 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -165,7 +165,7 @@ &hdmi {
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-- 
2.35.1

[PATCH AUTOSEL 6.0 06/39] arm: dts: rockchip: fix node name for hym8563 rtc

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 17b57beafccb4569accbfc8c11390744cf59c021 ]

Fix the node name for hym8563 in all arm rockchip devicetrees.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036-evb.dts          | 2 +-
 arch/arm/boot/dts/rk3288-evb-act8846.dts  | 2 +-
 arch/arm/boot/dts/rk3288-firefly.dtsi     | 2 +-
 arch/arm/boot/dts/rk3288-miqi.dts         | 2 +-
 arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 2a7e6624efb9..ea23ba98625e 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -31,7 +31,7 @@ phy0: ethernet-phy@0 {
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index be695b8c1f67..8a635c243127 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -54,7 +54,7 @@ vdd_gpu: syr828@41 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 052afe5543e2..9267857beccb 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -233,7 +233,7 @@ vdd_gpu: syr828@41 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 713f55e143c6..e3d5644f2915 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -162,7 +162,7 @@ vdd_gpu: syr828@41 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 80e0f07c8e87..07a3a52753d2 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -165,7 +165,7 @@ &hdmi {
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 06/39] arm: dts: rockchip: fix node name for hym8563 rtc

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 17b57beafccb4569accbfc8c11390744cf59c021 ]

Fix the node name for hym8563 in all arm rockchip devicetrees.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036-evb.dts          | 2 +-
 arch/arm/boot/dts/rk3288-evb-act8846.dts  | 2 +-
 arch/arm/boot/dts/rk3288-firefly.dtsi     | 2 +-
 arch/arm/boot/dts/rk3288-miqi.dts         | 2 +-
 arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 2a7e6624efb9..ea23ba98625e 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -31,7 +31,7 @@ phy0: ethernet-phy@0 {
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index be695b8c1f67..8a635c243127 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -54,7 +54,7 @@ vdd_gpu: syr828@41 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 052afe5543e2..9267857beccb 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -233,7 +233,7 @@ vdd_gpu: syr828@41 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 713f55e143c6..e3d5644f2915 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -162,7 +162,7 @@ vdd_gpu: syr828@41 {
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 80e0f07c8e87..07a3a52753d2 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -165,7 +165,7 @@ &hdmi {
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 07/39] arm: dts: rockchip: remove clock-frequency from rtc

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 6122f3be70d90a1b2a1188d8910256fc218376a9 ]

'clock-frequency' is not part of the DT binding and not supported by the
Linux driver.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036-evb.dts          | 1 -
 arch/arm/boot/dts/rk3288-firefly.dtsi     | 1 -
 arch/arm/boot/dts/rk3288-miqi.dts         | 1 -
 arch/arm/boot/dts/rk3288-rock2-square.dts | 1 -
 arch/arm/boot/dts/rk3288-vmarc-som.dtsi   | 1 -
 5 files changed, 5 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index ea23ba98625e..94216f870b57 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -35,7 +35,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 9267857beccb..3836c61cfb76 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -237,7 +237,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio7>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index e3d5644f2915..db1eb648e0e1 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -166,7 +166,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 07a3a52753d2..13cfdaa95cc7 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -169,7 +169,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
index 0ae2bd150e37..793951655b73 100644
--- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -241,7 +241,6 @@ hym8563: rtc@51 {
 		interrupt-parent = <&gpio5>;
 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "hym8563";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
-- 
2.35.1

[PATCH AUTOSEL 6.0 07/39] arm: dts: rockchip: remove clock-frequency from rtc

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 6122f3be70d90a1b2a1188d8910256fc218376a9 ]

'clock-frequency' is not part of the DT binding and not supported by the
Linux driver.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036-evb.dts          | 1 -
 arch/arm/boot/dts/rk3288-firefly.dtsi     | 1 -
 arch/arm/boot/dts/rk3288-miqi.dts         | 1 -
 arch/arm/boot/dts/rk3288-rock2-square.dts | 1 -
 arch/arm/boot/dts/rk3288-vmarc-som.dtsi   | 1 -
 5 files changed, 5 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index ea23ba98625e..94216f870b57 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -35,7 +35,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 9267857beccb..3836c61cfb76 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -237,7 +237,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio7>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index e3d5644f2915..db1eb648e0e1 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -166,7 +166,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 07a3a52753d2..13cfdaa95cc7 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -169,7 +169,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
index 0ae2bd150e37..793951655b73 100644
--- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -241,7 +241,6 @@ hym8563: rtc@51 {
 		interrupt-parent = <&gpio5>;
 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "hym8563";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 07/39] arm: dts: rockchip: remove clock-frequency from rtc

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 6122f3be70d90a1b2a1188d8910256fc218376a9 ]

'clock-frequency' is not part of the DT binding and not supported by the
Linux driver.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036-evb.dts          | 1 -
 arch/arm/boot/dts/rk3288-firefly.dtsi     | 1 -
 arch/arm/boot/dts/rk3288-miqi.dts         | 1 -
 arch/arm/boot/dts/rk3288-rock2-square.dts | 1 -
 arch/arm/boot/dts/rk3288-vmarc-som.dtsi   | 1 -
 5 files changed, 5 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index ea23ba98625e..94216f870b57 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -35,7 +35,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 9267857beccb..3836c61cfb76 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -237,7 +237,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio7>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index e3d5644f2915..db1eb648e0e1 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -166,7 +166,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 07a3a52753d2..13cfdaa95cc7 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -169,7 +169,6 @@ hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
index 0ae2bd150e37..793951655b73 100644
--- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -241,7 +241,6 @@ hym8563: rtc@51 {
 		interrupt-parent = <&gpio5>;
 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "hym8563";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 08/39] ARM: dts: rockchip: fix adc-keys sub node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 942b35de22efeb4f9ded83f1ea7747f3fe5a3bb2 ]

Fix adc-keys sub node names on Rockchip boards,
so that they match with regex: '^button-'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/7a0013b1-3a55-a344-e9ea-eacb4b49433c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3066a-mk808.dts | 2 +-
 arch/arm/boot/dts/rk3288-evb.dtsi   | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index cfa318a506eb..2db5ba706208 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -32,7 +32,7 @@ adc-keys {
 		keyup-threshold-microvolt = <2500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 399d6b9c5fd4..382d2839cf47 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -28,19 +28,19 @@ button-down {
 			press-threshold-microvolt = <300000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <640000>;
 		};
 
-		esc {
+		button-esc {
 			label = "Esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1000000>;
 		};
 
-		home  {
+		button-home  {
 			label = "Home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <1300000>;
-- 
2.35.1

[PATCH AUTOSEL 6.0 08/39] ARM: dts: rockchip: fix adc-keys sub node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 942b35de22efeb4f9ded83f1ea7747f3fe5a3bb2 ]

Fix adc-keys sub node names on Rockchip boards,
so that they match with regex: '^button-'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/7a0013b1-3a55-a344-e9ea-eacb4b49433c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3066a-mk808.dts | 2 +-
 arch/arm/boot/dts/rk3288-evb.dtsi   | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index cfa318a506eb..2db5ba706208 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -32,7 +32,7 @@ adc-keys {
 		keyup-threshold-microvolt = <2500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 399d6b9c5fd4..382d2839cf47 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -28,19 +28,19 @@ button-down {
 			press-threshold-microvolt = <300000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <640000>;
 		};
 
-		esc {
+		button-esc {
 			label = "Esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1000000>;
 		};
 
-		home  {
+		button-home  {
 			label = "Home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <1300000>;
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 08/39] ARM: dts: rockchip: fix adc-keys sub node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 942b35de22efeb4f9ded83f1ea7747f3fe5a3bb2 ]

Fix adc-keys sub node names on Rockchip boards,
so that they match with regex: '^button-'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/7a0013b1-3a55-a344-e9ea-eacb4b49433c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3066a-mk808.dts | 2 +-
 arch/arm/boot/dts/rk3288-evb.dtsi   | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index cfa318a506eb..2db5ba706208 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -32,7 +32,7 @@ adc-keys {
 		keyup-threshold-microvolt = <2500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 399d6b9c5fd4..382d2839cf47 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -28,19 +28,19 @@ button-down {
 			press-threshold-microvolt = <300000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <640000>;
 		};
 
-		esc {
+		button-esc {
 			label = "Esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1000000>;
 		};
 
-		home  {
+		button-home  {
 			label = "Home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <1300000>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 09/39] arm64: dts: rockchip: fix adc-keys sub node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f2bd2e76d6ea13e12849975adae46145375532a4 ]

Fix adc-keys sub node names on Rockchip boards,
so that they match with regex: '^button-'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/6a6a3603-5540-cacc-2672-c015af1ec684@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/px30-evb.dts            | 10 +++++-----
 arch/arm64/boot/dts/rockchip/rk3308-evb.dts          | 12 ++++++------
 arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts      |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts    |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts   |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts     |  4 ++--
 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi      |  2 +-
 .../boot/dts/rockchip/rk3399-sapphire-excavator.dts  |  4 ++--
 arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi    |  2 +-
 10 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 848bc39cf86a..4249b42843da 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -30,31 +30,31 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		esc-key {
+		button-esc {
 			label = "esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1310000>;
 		};
 
-		home-key {
+		button-home {
 			label = "home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <624000>;
 		};
 
-		menu-key {
+		button-menu {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <987000>;
 		};
 
-		vol-down-key {
+		button-down {
 			label = "volume down";
 			linux,code = <KEY_VOLUMEDOWN>;
 			press-threshold-microvolt = <300000>;
 		};
 
-		vol-up-key {
+		button-up {
 			label = "volume up";
 			linux,code = <KEY_VOLUMEUP>;
 			press-threshold-microvolt = <17000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
index 9fe9b0d11003..184b84fdde07 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
@@ -23,7 +23,7 @@ adc-keys0 {
 		poll-interval = <100>;
 		keyup-threshold-microvolt = <1800000>;
 
-		func-key {
+		button-func {
 			linux,code = <KEY_FN>;
 			label = "function";
 			press-threshold-microvolt = <18000>;
@@ -37,31 +37,31 @@ adc-keys1 {
 		poll-interval = <100>;
 		keyup-threshold-microvolt = <1800000>;
 
-		esc-key {
+		button-esc {
 			linux,code = <KEY_MICMUTE>;
 			label = "micmute";
 			press-threshold-microvolt = <1130000>;
 		};
 
-		home-key {
+		button-home {
 			linux,code = <KEY_MODE>;
 			label = "mode";
 			press-threshold-microvolt = <901000>;
 		};
 
-		menu-key {
+		button-menu {
 			linux,code = <KEY_PLAY>;
 			label = "play";
 			press-threshold-microvolt = <624000>;
 		};
 
-		vol-down-key {
+		button-down {
 			linux,code = <KEY_VOLUMEDOWN>;
 			label = "volume down";
 			press-threshold-microvolt = <300000>;
 		};
 
-		vol-up-key {
+		button-up {
 			linux,code = <KEY_VOLUMEUP>;
 			label = "volume up";
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
index 43c928ac98f0..1deef53a4c94 100644
--- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -25,7 +25,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <17000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 2a332763c35c..9d9297bc5f04 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -123,7 +123,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index 452728b82e42..3bf8f959e42c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -39,7 +39,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
index 72182c58cc46..65cb21837b0c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
@@ -19,7 +19,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 9e2e246e0bab..dba4d03bfc2b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -52,13 +52,13 @@ button-down {
 			press-threshold-microvolt = <300000>;
 		};
 
-		back {
+		button-back {
 			label = "Back";
 			linux,code = <KEY_BACK>;
 			press-threshold-microvolt = <985000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <1314000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index acb174d3a8c5..4f3dd107e83e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -41,7 +41,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index 13927e7d0724..dbec2b7173a0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -33,13 +33,13 @@ button-down {
 			press-threshold-microvolt = <300000>;
 		};
 
-		back {
+		button-back {
 			label = "Back";
 			linux,code = <KEY_BACK>;
 			press-threshold-microvolt = <985000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <1314000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index 0d45868132b9..8d61f824c12d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -23,7 +23,7 @@ adc-keys {
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1750000>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
-- 
2.35.1

[PATCH AUTOSEL 6.0 09/39] arm64: dts: rockchip: fix adc-keys sub node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f2bd2e76d6ea13e12849975adae46145375532a4 ]

Fix adc-keys sub node names on Rockchip boards,
so that they match with regex: '^button-'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/6a6a3603-5540-cacc-2672-c015af1ec684@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/px30-evb.dts            | 10 +++++-----
 arch/arm64/boot/dts/rockchip/rk3308-evb.dts          | 12 ++++++------
 arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts      |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts    |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts   |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts     |  4 ++--
 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi      |  2 +-
 .../boot/dts/rockchip/rk3399-sapphire-excavator.dts  |  4 ++--
 arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi    |  2 +-
 10 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 848bc39cf86a..4249b42843da 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -30,31 +30,31 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		esc-key {
+		button-esc {
 			label = "esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1310000>;
 		};
 
-		home-key {
+		button-home {
 			label = "home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <624000>;
 		};
 
-		menu-key {
+		button-menu {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <987000>;
 		};
 
-		vol-down-key {
+		button-down {
 			label = "volume down";
 			linux,code = <KEY_VOLUMEDOWN>;
 			press-threshold-microvolt = <300000>;
 		};
 
-		vol-up-key {
+		button-up {
 			label = "volume up";
 			linux,code = <KEY_VOLUMEUP>;
 			press-threshold-microvolt = <17000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
index 9fe9b0d11003..184b84fdde07 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
@@ -23,7 +23,7 @@ adc-keys0 {
 		poll-interval = <100>;
 		keyup-threshold-microvolt = <1800000>;
 
-		func-key {
+		button-func {
 			linux,code = <KEY_FN>;
 			label = "function";
 			press-threshold-microvolt = <18000>;
@@ -37,31 +37,31 @@ adc-keys1 {
 		poll-interval = <100>;
 		keyup-threshold-microvolt = <1800000>;
 
-		esc-key {
+		button-esc {
 			linux,code = <KEY_MICMUTE>;
 			label = "micmute";
 			press-threshold-microvolt = <1130000>;
 		};
 
-		home-key {
+		button-home {
 			linux,code = <KEY_MODE>;
 			label = "mode";
 			press-threshold-microvolt = <901000>;
 		};
 
-		menu-key {
+		button-menu {
 			linux,code = <KEY_PLAY>;
 			label = "play";
 			press-threshold-microvolt = <624000>;
 		};
 
-		vol-down-key {
+		button-down {
 			linux,code = <KEY_VOLUMEDOWN>;
 			label = "volume down";
 			press-threshold-microvolt = <300000>;
 		};
 
-		vol-up-key {
+		button-up {
 			linux,code = <KEY_VOLUMEUP>;
 			label = "volume up";
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
index 43c928ac98f0..1deef53a4c94 100644
--- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -25,7 +25,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <17000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 2a332763c35c..9d9297bc5f04 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -123,7 +123,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index 452728b82e42..3bf8f959e42c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -39,7 +39,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
index 72182c58cc46..65cb21837b0c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
@@ -19,7 +19,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 9e2e246e0bab..dba4d03bfc2b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -52,13 +52,13 @@ button-down {
 			press-threshold-microvolt = <300000>;
 		};
 
-		back {
+		button-back {
 			label = "Back";
 			linux,code = <KEY_BACK>;
 			press-threshold-microvolt = <985000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <1314000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index acb174d3a8c5..4f3dd107e83e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -41,7 +41,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index 13927e7d0724..dbec2b7173a0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -33,13 +33,13 @@ button-down {
 			press-threshold-microvolt = <300000>;
 		};
 
-		back {
+		button-back {
 			label = "Back";
 			linux,code = <KEY_BACK>;
 			press-threshold-microvolt = <985000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <1314000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index 0d45868132b9..8d61f824c12d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -23,7 +23,7 @@ adc-keys {
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1750000>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 09/39] arm64: dts: rockchip: fix adc-keys sub node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f2bd2e76d6ea13e12849975adae46145375532a4 ]

Fix adc-keys sub node names on Rockchip boards,
so that they match with regex: '^button-'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/6a6a3603-5540-cacc-2672-c015af1ec684@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/px30-evb.dts            | 10 +++++-----
 arch/arm64/boot/dts/rockchip/rk3308-evb.dts          | 12 ++++++------
 arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts      |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts    |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts   |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts     |  4 ++--
 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi      |  2 +-
 .../boot/dts/rockchip/rk3399-sapphire-excavator.dts  |  4 ++--
 arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi    |  2 +-
 10 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 848bc39cf86a..4249b42843da 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -30,31 +30,31 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		esc-key {
+		button-esc {
 			label = "esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1310000>;
 		};
 
-		home-key {
+		button-home {
 			label = "home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <624000>;
 		};
 
-		menu-key {
+		button-menu {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <987000>;
 		};
 
-		vol-down-key {
+		button-down {
 			label = "volume down";
 			linux,code = <KEY_VOLUMEDOWN>;
 			press-threshold-microvolt = <300000>;
 		};
 
-		vol-up-key {
+		button-up {
 			label = "volume up";
 			linux,code = <KEY_VOLUMEUP>;
 			press-threshold-microvolt = <17000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
index 9fe9b0d11003..184b84fdde07 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
@@ -23,7 +23,7 @@ adc-keys0 {
 		poll-interval = <100>;
 		keyup-threshold-microvolt = <1800000>;
 
-		func-key {
+		button-func {
 			linux,code = <KEY_FN>;
 			label = "function";
 			press-threshold-microvolt = <18000>;
@@ -37,31 +37,31 @@ adc-keys1 {
 		poll-interval = <100>;
 		keyup-threshold-microvolt = <1800000>;
 
-		esc-key {
+		button-esc {
 			linux,code = <KEY_MICMUTE>;
 			label = "micmute";
 			press-threshold-microvolt = <1130000>;
 		};
 
-		home-key {
+		button-home {
 			linux,code = <KEY_MODE>;
 			label = "mode";
 			press-threshold-microvolt = <901000>;
 		};
 
-		menu-key {
+		button-menu {
 			linux,code = <KEY_PLAY>;
 			label = "play";
 			press-threshold-microvolt = <624000>;
 		};
 
-		vol-down-key {
+		button-down {
 			linux,code = <KEY_VOLUMEDOWN>;
 			label = "volume down";
 			press-threshold-microvolt = <300000>;
 		};
 
-		vol-up-key {
+		button-up {
 			linux,code = <KEY_VOLUMEUP>;
 			label = "volume up";
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
index 43c928ac98f0..1deef53a4c94 100644
--- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -25,7 +25,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <17000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 2a332763c35c..9d9297bc5f04 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -123,7 +123,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index 452728b82e42..3bf8f959e42c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -39,7 +39,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
index 72182c58cc46..65cb21837b0c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
@@ -19,7 +19,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 9e2e246e0bab..dba4d03bfc2b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -52,13 +52,13 @@ button-down {
 			press-threshold-microvolt = <300000>;
 		};
 
-		back {
+		button-back {
 			label = "Back";
 			linux,code = <KEY_BACK>;
 			press-threshold-microvolt = <985000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <1314000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index acb174d3a8c5..4f3dd107e83e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -41,7 +41,7 @@ adc-keys {
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index 13927e7d0724..dbec2b7173a0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -33,13 +33,13 @@ button-down {
 			press-threshold-microvolt = <300000>;
 		};
 
-		back {
+		button-back {
 			label = "Back";
 			linux,code = <KEY_BACK>;
 			press-threshold-microvolt = <985000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <1314000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index 0d45868132b9..8d61f824c12d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -23,7 +23,7 @@ adc-keys {
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1750000>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 10/39] ARM: dts: rockchip: fix ir-receiver node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit dd847fe34cdf1e89afed1af24986359f13082bfb ]

Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/ea5af279-f44c-afea-023d-bb37f5a0d58d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index a9ed3cd2c2da..239d2ec37fdc 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -71,7 +71,7 @@ spdif_out: spdif-out {
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
-- 
2.35.1

[PATCH AUTOSEL 6.0 10/39] ARM: dts: rockchip: fix ir-receiver node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit dd847fe34cdf1e89afed1af24986359f13082bfb ]

Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/ea5af279-f44c-afea-023d-bb37f5a0d58d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index a9ed3cd2c2da..239d2ec37fdc 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -71,7 +71,7 @@ spdif_out: spdif-out {
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 10/39] ARM: dts: rockchip: fix ir-receiver node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit dd847fe34cdf1e89afed1af24986359f13082bfb ]

Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/ea5af279-f44c-afea-023d-bb37f5a0d58d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index a9ed3cd2c2da..239d2ec37fdc 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -71,7 +71,7 @@ spdif_out: spdif-out {
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 11/39] arm64: dts: rockchip: fix ir-receiver node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit de0d04b9780a23eb928aedfb6f981285f78d58e5 ]

Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e9764253-8ce8-150b-4820-41f03f845469@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index ea6820902ede..7ea48167747c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -19,7 +19,7 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
-	ir_rx {
+	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-- 
2.35.1

[PATCH AUTOSEL 6.0 11/39] arm64: dts: rockchip: fix ir-receiver node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit de0d04b9780a23eb928aedfb6f981285f78d58e5 ]

Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e9764253-8ce8-150b-4820-41f03f845469@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index ea6820902ede..7ea48167747c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -19,7 +19,7 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
-	ir_rx {
+	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 11/39] arm64: dts: rockchip: fix ir-receiver node names

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit de0d04b9780a23eb928aedfb6f981285f78d58e5 ]

Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e9764253-8ce8-150b-4820-41f03f845469@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index ea6820902ede..7ea48167747c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -19,7 +19,7 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
-	ir_rx {
+	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 12/39] ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 11871e20bcb23c00966e785a124fb72bc8340af4 ]

The lcdc1-rgb24 node name is out of line with the rest
of the rk3188 lcdc1 node, so fix it.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/7b9c0a6f-626b-07e8-ae74-7e0f08b8d241@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index cdd4a0bd5133..b8f34bef0efa 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -379,7 +379,7 @@ lcdc1_vsync: lcdc1-vsync {
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
-- 
2.35.1

[PATCH AUTOSEL 6.0 12/39] ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 11871e20bcb23c00966e785a124fb72bc8340af4 ]

The lcdc1-rgb24 node name is out of line with the rest
of the rk3188 lcdc1 node, so fix it.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/7b9c0a6f-626b-07e8-ae74-7e0f08b8d241@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index cdd4a0bd5133..b8f34bef0efa 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -379,7 +379,7 @@ lcdc1_vsync: lcdc1-vsync {
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 12/39] ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 11871e20bcb23c00966e785a124fb72bc8340af4 ]

The lcdc1-rgb24 node name is out of line with the rest
of the rk3188 lcdc1 node, so fix it.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/7b9c0a6f-626b-07e8-ae74-7e0f08b8d241@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index cdd4a0bd5133..b8f34bef0efa 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -379,7 +379,7 @@ lcdc1_vsync: lcdc1-vsync {
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 13/39] fs: use acquire ordering in __fget_light()

[Sasha Levin]

From: Jann Horn <jannh@google.com>

[ Upstream commit 7ee47dcfff1835ff75a794d1075b6b5f5462cfed ]

We must prevent the CPU from reordering the files->count read with the
FD table access like this, on architectures where read-read reordering is
possible:

    files_lookup_fd_raw()
                                  close_fd()
                                  put_files_struct()
    atomic_read(&files->count)

I would like to mark this for stable, but the stable rules explicitly say
"no theoretical races", and given that the FD table pointer and
files->count are explicitly stored in the same cacheline, this sort of
reordering seems quite unlikely in practice...

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/file.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/fs/file.c b/fs/file.c
index 3bcc1ecc314a..57af5f8375fd 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -1002,7 +1002,16 @@ static unsigned long __fget_light(unsigned int fd, fmode_t mask)
 	struct files_struct *files = current->files;
 	struct file *file;
 
-	if (atomic_read(&files->count) == 1) {
+	/*
+	 * If another thread is concurrently calling close_fd() followed
+	 * by put_files_struct(), we must not observe the old table
+	 * entry combined with the new refcount - otherwise we could
+	 * return a file that is concurrently being freed.
+	 *
+	 * atomic_read_acquire() pairs with atomic_dec_and_test() in
+	 * put_files_struct().
+	 */
+	if (atomic_read_acquire(&files->count) == 1) {
 		file = files_lookup_fd_raw(files, fd);
 		if (!file || unlikely(file->f_mode & mask))
 			return 0;
-- 
2.35.1

[PATCH AUTOSEL 6.0 14/39] ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels

[Sasha Levin]

From: Tomislav Novak <tnovak@fb.com>

[ Upstream commit 612695bccfdbd52004551308a55bae410e7cd22f ]

Store the frame address where arm_get_current_stackframe() looks for it
(ARM_r7 instead of ARM_fp if CONFIG_THUMB2_KERNEL=y). Otherwise frame->fp
gets set to 0, causing unwind_frame() to fail.

  # bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
  Attaching 1 probe...
  @[
      __schedule+1059
  ]: 1

A typical first unwind instruction is 0x97 (SP = R7), so after executing
it SP ends up being 0 and -URC_FAILURE is returned.

  unwind_frame(pc = ac9da7d7 lr = 00000000 sp = c69bdda0 fp = 00000000)
  unwind_find_idx(ac9da7d7)
  unwind_exec_insn: insn = 00000097
  unwind_exec_insn: fp = 00000000 sp = 00000000 lr = 00000000 pc = 00000000

With this patch:

  # bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
  Attaching 1 probe...
  @[
      __schedule+1059
      __schedule+1059
      schedule+79
      schedule_hrtimeout_range_clock+163
      schedule_hrtimeout_range+17
      ep_poll+471
      SyS_epoll_wait+111
      sys_epoll_pwait+231
      __ret_fast_syscall+1
  ]: 1

Link: https://lore.kernel.org/r/20220920230728.2617421-1-tnovak@fb.com/

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomislav Novak <tnovak@fb.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/perf_event.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index fe87397c3d8c..bdbc1e590891 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -17,7 +17,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
 
 #define perf_arch_fetch_caller_regs(regs, __ip) { \
 	(regs)->ARM_pc = (__ip); \
-	(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
+	frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \
 	(regs)->ARM_sp = current_stack_pointer; \
 	(regs)->ARM_cpsr = SVC_MODE; \
 }
-- 
2.35.1

[PATCH AUTOSEL 6.0 14/39] ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels

[Sasha Levin]

From: Tomislav Novak <tnovak@fb.com>

[ Upstream commit 612695bccfdbd52004551308a55bae410e7cd22f ]

Store the frame address where arm_get_current_stackframe() looks for it
(ARM_r7 instead of ARM_fp if CONFIG_THUMB2_KERNEL=y). Otherwise frame->fp
gets set to 0, causing unwind_frame() to fail.

  # bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
  Attaching 1 probe...
  @[
      __schedule+1059
  ]: 1

A typical first unwind instruction is 0x97 (SP = R7), so after executing
it SP ends up being 0 and -URC_FAILURE is returned.

  unwind_frame(pc = ac9da7d7 lr = 00000000 sp = c69bdda0 fp = 00000000)
  unwind_find_idx(ac9da7d7)
  unwind_exec_insn: insn = 00000097
  unwind_exec_insn: fp = 00000000 sp = 00000000 lr = 00000000 pc = 00000000

With this patch:

  # bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
  Attaching 1 probe...
  @[
      __schedule+1059
      __schedule+1059
      schedule+79
      schedule_hrtimeout_range_clock+163
      schedule_hrtimeout_range+17
      ep_poll+471
      SyS_epoll_wait+111
      sys_epoll_pwait+231
      __ret_fast_syscall+1
  ]: 1

Link: https://lore.kernel.org/r/20220920230728.2617421-1-tnovak@fb.com/

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomislav Novak <tnovak@fb.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/perf_event.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index fe87397c3d8c..bdbc1e590891 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -17,7 +17,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
 
 #define perf_arch_fetch_caller_regs(regs, __ip) { \
 	(regs)->ARM_pc = (__ip); \
-	(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
+	frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \
 	(regs)->ARM_sp = current_stack_pointer; \
 	(regs)->ARM_cpsr = SVC_MODE; \
 }
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 15/39] ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation

[Sasha Levin]

From: Giulio Benetti <giulio.benetti@benettiengineering.com>

[ Upstream commit 340a982825f76f1cff0daa605970fe47321b5ee7 ]

Actually in no-MMU SoCs(i.e. i.MXRT) ZERO_PAGE(vaddr) expands to
```
virt_to_page(0)
```
that in order expands to:
```
pfn_to_page(virt_to_pfn(0))
```
and then virt_to_pfn(0) to:
```
        ((((unsigned long)(0) - PAGE_OFFSET) >> PAGE_SHIFT) +
         PHYS_PFN_OFFSET)
```
where PAGE_OFFSET and PHYS_PFN_OFFSET are the DRAM offset(0x80000000) and
PAGE_SHIFT is 12. This way we obtain 16MB(0x01000000) summed to the base of
DRAM(0x80000000).
When ZERO_PAGE(0) is then used, for example in bio_add_page(), the page
gets an address that is out of DRAM bounds.
So instead of using fake virtual page 0 let's allocate a dedicated
zero_page during paging_init() and assign it to a global 'struct page *
empty_zero_page' the same way mmu.c does and it's the same approach used
in m68k with commit dc068f462179 as discussed here[0]. Then let's move
ZERO_PAGE() definition to the top of pgtable.h to be in common between
mmu.c and nommu.c.

[0]: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#m1266ceb63
ad140743174d6b3070364d3c9a5179b

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/pgtable-nommu.h |  6 ------
 arch/arm/include/asm/pgtable.h       | 16 +++++++++-------
 arch/arm/mm/nommu.c                  | 19 +++++++++++++++++++
 3 files changed, 28 insertions(+), 13 deletions(-)

diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index d16aba48fa0a..090011394477 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -44,12 +44,6 @@
 
 typedef pte_t *pte_addr_t;
 
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 78a532068fec..ef48a55e9af8 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -10,6 +10,15 @@
 #include <linux/const.h>
 #include <asm/proc-fns.h>
 
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+#endif
+
 #ifndef CONFIG_MMU
 
 #include <asm-generic/pgtable-nopud.h>
@@ -139,13 +148,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
  */
 
 #ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index c42debaded95..c1494a4dee25 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -26,6 +26,13 @@
 
 unsigned long vectors_base;
 
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
 #ifdef CONFIG_ARM_MPU
 struct mpu_rgn_info mpu_rgn_info;
 #endif
@@ -148,9 +155,21 @@ void __init adjust_lowmem_bounds(void)
  */
 void __init paging_init(const struct machine_desc *mdesc)
 {
+	void *zero_page;
+
 	early_trap_init((void *)vectors_base);
 	mpu_setup();
+
+	/* allocate the zero page. */
+	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	if (!zero_page)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE);
+
 	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
 }
 
 /*
-- 
2.35.1

[PATCH AUTOSEL 6.0 15/39] ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation

[Sasha Levin]

From: Giulio Benetti <giulio.benetti@benettiengineering.com>

[ Upstream commit 340a982825f76f1cff0daa605970fe47321b5ee7 ]

Actually in no-MMU SoCs(i.e. i.MXRT) ZERO_PAGE(vaddr) expands to
```
virt_to_page(0)
```
that in order expands to:
```
pfn_to_page(virt_to_pfn(0))
```
and then virt_to_pfn(0) to:
```
        ((((unsigned long)(0) - PAGE_OFFSET) >> PAGE_SHIFT) +
         PHYS_PFN_OFFSET)
```
where PAGE_OFFSET and PHYS_PFN_OFFSET are the DRAM offset(0x80000000) and
PAGE_SHIFT is 12. This way we obtain 16MB(0x01000000) summed to the base of
DRAM(0x80000000).
When ZERO_PAGE(0) is then used, for example in bio_add_page(), the page
gets an address that is out of DRAM bounds.
So instead of using fake virtual page 0 let's allocate a dedicated
zero_page during paging_init() and assign it to a global 'struct page *
empty_zero_page' the same way mmu.c does and it's the same approach used
in m68k with commit dc068f462179 as discussed here[0]. Then let's move
ZERO_PAGE() definition to the top of pgtable.h to be in common between
mmu.c and nommu.c.

[0]: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#m1266ceb63
ad140743174d6b3070364d3c9a5179b

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/pgtable-nommu.h |  6 ------
 arch/arm/include/asm/pgtable.h       | 16 +++++++++-------
 arch/arm/mm/nommu.c                  | 19 +++++++++++++++++++
 3 files changed, 28 insertions(+), 13 deletions(-)

diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index d16aba48fa0a..090011394477 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -44,12 +44,6 @@
 
 typedef pte_t *pte_addr_t;
 
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 78a532068fec..ef48a55e9af8 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -10,6 +10,15 @@
 #include <linux/const.h>
 #include <asm/proc-fns.h>
 
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+#endif
+
 #ifndef CONFIG_MMU
 
 #include <asm-generic/pgtable-nopud.h>
@@ -139,13 +148,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
  */
 
 #ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index c42debaded95..c1494a4dee25 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -26,6 +26,13 @@
 
 unsigned long vectors_base;
 
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
 #ifdef CONFIG_ARM_MPU
 struct mpu_rgn_info mpu_rgn_info;
 #endif
@@ -148,9 +155,21 @@ void __init adjust_lowmem_bounds(void)
  */
 void __init paging_init(const struct machine_desc *mdesc)
 {
+	void *zero_page;
+
 	early_trap_init((void *)vectors_base);
 	mpu_setup();
+
+	/* allocate the zero page. */
+	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	if (!zero_page)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE);
+
 	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
 }
 
 /*
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 16/39] ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register

[Sasha Levin]

From: Chancel Liu <chancel.liu@nxp.com>

[ Upstream commit 3ca507bf99611c82dafced73e921c1b10ee12869 ]

DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
correct frequency of LRCLK and BCLK. Sometimes the read-only value
can't be updated timely after enabling SYSCLK. This results in wrong
calculation values. Delay is introduced here to wait for newest value
from register. The time of the delay should be at least 500~1000us
according to test.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109121354.123958-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 6df06fba4377..ee1cad5af535 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2503,6 +2503,14 @@ static void wm8962_configure_bclk(struct snd_soc_component *component)
 		snd_soc_component_update_bits(component, WM8962_CLOCKING2,
 				WM8962_SYSCLK_ENA_MASK, WM8962_SYSCLK_ENA);
 
+	/* DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
+	 * correct frequency of LRCLK and BCLK. Sometimes the read-only value
+	 * can't be updated timely after enabling SYSCLK. This results in wrong
+	 * calculation values. Delay is introduced here to wait for newest
+	 * value from register. The time of the delay should be at least
+	 * 500~1000us according to test.
+	 */
+	usleep_range(500, 1000);
 	dspclk = snd_soc_component_read(component, WM8962_CLOCKING1);
 
 	if (snd_soc_component_get_bias_level(component) != SND_SOC_BIAS_ON)
-- 
2.35.1

[PATCH AUTOSEL 6.0 16/39] ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register

[Sasha Levin]

From: Chancel Liu <chancel.liu@nxp.com>

[ Upstream commit 3ca507bf99611c82dafced73e921c1b10ee12869 ]

DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
correct frequency of LRCLK and BCLK. Sometimes the read-only value
can't be updated timely after enabling SYSCLK. This results in wrong
calculation values. Delay is introduced here to wait for newest value
from register. The time of the delay should be at least 500~1000us
according to test.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109121354.123958-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 6df06fba4377..ee1cad5af535 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2503,6 +2503,14 @@ static void wm8962_configure_bclk(struct snd_soc_component *component)
 		snd_soc_component_update_bits(component, WM8962_CLOCKING2,
 				WM8962_SYSCLK_ENA_MASK, WM8962_SYSCLK_ENA);
 
+	/* DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
+	 * correct frequency of LRCLK and BCLK. Sometimes the read-only value
+	 * can't be updated timely after enabling SYSCLK. This results in wrong
+	 * calculation values. Delay is introduced here to wait for newest
+	 * value from register. The time of the delay should be at least
+	 * 500~1000us according to test.
+	 */
+	usleep_range(500, 1000);
 	dspclk = snd_soc_component_read(component, WM8962_CLOCKING1);
 
 	if (snd_soc_component_get_bias_level(component) != SND_SOC_BIAS_ON)
-- 
2.35.1

[PATCH AUTOSEL 6.0 17/39] spi: mediatek: Fix DEVAPC Violation at KO Remove

[Sasha Levin]

From: Zhichao Liu <zhichao.liu@mediatek.com>

[ Upstream commit 0d10e90cee9eb57882b0f7e19fd699033722e226 ]

A DEVAPC violation occurs when removing the module
due to accessing HW registers without base clock.
To fix this bug, the correct method is:
1. Call the runtime resume function to enable the
   clock;
2. Operate the registers to reset the HW;
3. Turn off the clocks and disable the device
   RPM mechanism.

Signed-off-by: Zhichao Liu <zhichao.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221110072839.30961-1-zhichao.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mt65xx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index cd9dc358d396..a7cc96aeb590 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -1268,8 +1268,11 @@ static int mtk_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct mtk_spi *mdata = spi_master_get_devdata(master);
+	int ret;
 
-	pm_runtime_disable(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0)
+		return ret;
 
 	mtk_spi_reset(mdata);
 
@@ -1278,6 +1281,9 @@ static int mtk_spi_remove(struct platform_device *pdev)
 		clk_unprepare(mdata->spi_hclk);
 	}
 
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 17/39] spi: mediatek: Fix DEVAPC Violation at KO Remove

[Sasha Levin]

From: Zhichao Liu <zhichao.liu@mediatek.com>

[ Upstream commit 0d10e90cee9eb57882b0f7e19fd699033722e226 ]

A DEVAPC violation occurs when removing the module
due to accessing HW registers without base clock.
To fix this bug, the correct method is:
1. Call the runtime resume function to enable the
   clock;
2. Operate the registers to reset the HW;
3. Turn off the clocks and disable the device
   RPM mechanism.

Signed-off-by: Zhichao Liu <zhichao.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221110072839.30961-1-zhichao.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mt65xx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index cd9dc358d396..a7cc96aeb590 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -1268,8 +1268,11 @@ static int mtk_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct mtk_spi *mdata = spi_master_get_devdata(master);
+	int ret;
 
-	pm_runtime_disable(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0)
+		return ret;
 
 	mtk_spi_reset(mdata);
 
@@ -1278,6 +1281,9 @@ static int mtk_spi_remove(struct platform_device *pdev)
 		clk_unprepare(mdata->spi_hclk);
 	}
 
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 18/39] ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit da74858a475782a3f16470907814c8cc5950ad68 ]

The clock source and the sched_clock provided by the arm_global_timer
on Rockchip rk3066a/rk3188 are quite unstable because their rates
depend on the CPU frequency.

Recent changes to the arm_global_timer driver makes it impossible to use.

On the other side, the arm_global_timer has a higher rating than the
ROCKCHIP_TIMER, it will be selected by default by the time framework
while we want to use the stable Rockchip clock source.

Keep the arm_global_timer disabled in order to have the
DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 1 -
 arch/arm/boot/dts/rk3xxx.dtsi | 7 +++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index b8f34bef0efa..44b54af0bbf9 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -607,7 +607,6 @@ &emac {
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 616a828e0c6e..17e89d30de78 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -76,6 +76,13 @@ global_timer: global-timer@1013c200 {
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
-- 
2.35.1

[PATCH AUTOSEL 6.0 18/39] ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit da74858a475782a3f16470907814c8cc5950ad68 ]

The clock source and the sched_clock provided by the arm_global_timer
on Rockchip rk3066a/rk3188 are quite unstable because their rates
depend on the CPU frequency.

Recent changes to the arm_global_timer driver makes it impossible to use.

On the other side, the arm_global_timer has a higher rating than the
ROCKCHIP_TIMER, it will be selected by default by the time framework
while we want to use the stable Rockchip clock source.

Keep the arm_global_timer disabled in order to have the
DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 1 -
 arch/arm/boot/dts/rk3xxx.dtsi | 7 +++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index b8f34bef0efa..44b54af0bbf9 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -607,7 +607,6 @@ &emac {
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 616a828e0c6e..17e89d30de78 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -76,6 +76,13 @@ global_timer: global-timer@1013c200 {
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 6.0 18/39] ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit da74858a475782a3f16470907814c8cc5950ad68 ]

The clock source and the sched_clock provided by the arm_global_timer
on Rockchip rk3066a/rk3188 are quite unstable because their rates
depend on the CPU frequency.

Recent changes to the arm_global_timer driver makes it impossible to use.

On the other side, the arm_global_timer has a higher rating than the
ROCKCHIP_TIMER, it will be selected by default by the time framework
while we want to use the stable Rockchip clock source.

Keep the arm_global_timer disabled in order to have the
DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 1 -
 arch/arm/boot/dts/rk3xxx.dtsi | 7 +++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index b8f34bef0efa..44b54af0bbf9 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -607,7 +607,6 @@ &emac {
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 616a828e0c6e..17e89d30de78 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -76,6 +76,13 @@ global_timer: global-timer@1013c200 {
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 19/39] ASoC: rt711-sdca: fix the latency time of clock stop prepare state machine transitions

[Sasha Levin]

From: Shuming Fan <shumingf@realtek.com>

[ Upstream commit c7d7d4e7bb1290cc473610b0bb96d9fa606d00e7 ]

Due to the hardware behavior, it takes some time for CBJ detection/impedance sensing/de-bounce.
The ClockStop_NotFinished flag will be raised until these functions are completed.
In ClockStopMode0 mode case, the SdW controller might check this flag from D3 to D0 when the
jack detection interrupt happened.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221116090318.5017-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt711-sdca-sdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt711-sdca-sdw.c b/sound/soc/codecs/rt711-sdca-sdw.c
index a085b2f530aa..31e77d462ef3 100644
--- a/sound/soc/codecs/rt711-sdca-sdw.c
+++ b/sound/soc/codecs/rt711-sdca-sdw.c
@@ -230,7 +230,7 @@ static int rt711_sdca_read_prop(struct sdw_slave *slave)
 	}
 
 	/* set the timeout values */
-	prop->clk_stop_timeout = 20;
+	prop->clk_stop_timeout = 700;
 
 	/* wake-up event */
 	prop->wake_capable = 1;
-- 
2.35.1

[PATCH AUTOSEL 6.0 19/39] ASoC: rt711-sdca: fix the latency time of clock stop prepare state machine transitions

[Sasha Levin]

From: Shuming Fan <shumingf@realtek.com>

[ Upstream commit c7d7d4e7bb1290cc473610b0bb96d9fa606d00e7 ]

Due to the hardware behavior, it takes some time for CBJ detection/impedance sensing/de-bounce.
The ClockStop_NotFinished flag will be raised until these functions are completed.
In ClockStopMode0 mode case, the SdW controller might check this flag from D3 to D0 when the
jack detection interrupt happened.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221116090318.5017-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt711-sdca-sdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt711-sdca-sdw.c b/sound/soc/codecs/rt711-sdca-sdw.c
index a085b2f530aa..31e77d462ef3 100644
--- a/sound/soc/codecs/rt711-sdca-sdw.c
+++ b/sound/soc/codecs/rt711-sdca-sdw.c
@@ -230,7 +230,7 @@ static int rt711_sdca_read_prop(struct sdw_slave *slave)
 	}
 
 	/* set the timeout values */
-	prop->clk_stop_timeout = 20;
+	prop->clk_stop_timeout = 700;
 
 	/* wake-up event */
 	prop->wake_capable = 1;
-- 
2.35.1

[PATCH AUTOSEL 6.0 20/39] 9p/fd: Use P9_HDRSZ for header size

[Sasha Levin]

From: GUO Zihua <guozihua@huawei.com>

[ Upstream commit 6854fadbeee10891ed74246bdc05031906b6c8cf ]

Cleanup hardcoded header sizes to use P9_HDRSZ instead of '7'

Link: https://lkml.kernel.org/r/20221117091159.31533-4-guozihua@huawei.com
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: commit message adjusted to make sense after offset size
adjustment got removed]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_fd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 0191f22d1ec3..fd364f095ea7 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -120,7 +120,7 @@ struct p9_conn {
 	struct list_head unsent_req_list;
 	struct p9_req_t *rreq;
 	struct p9_req_t *wreq;
-	char tmp_buf[7];
+	char tmp_buf[P9_HDRSZ];
 	struct p9_fcall rc;
 	int wpos;
 	int wsize;
@@ -291,7 +291,7 @@ static void p9_read_work(struct work_struct *work)
 	if (!m->rc.sdata) {
 		m->rc.sdata = m->tmp_buf;
 		m->rc.offset = 0;
-		m->rc.capacity = 7; /* start by reading header */
+		m->rc.capacity = P9_HDRSZ; /* start by reading header */
 	}
 
 	clear_bit(Rpending, &m->wsched);
@@ -314,7 +314,7 @@ static void p9_read_work(struct work_struct *work)
 		p9_debug(P9_DEBUG_TRANS, "got new header\n");
 
 		/* Header size */
-		m->rc.size = 7;
+		m->rc.size = P9_HDRSZ;
 		err = p9_parse_header(&m->rc, &m->rc.size, NULL, NULL, 0);
 		if (err) {
 			p9_debug(P9_DEBUG_ERROR,
-- 
2.35.1

[PATCH AUTOSEL 6.0 21/39] regulator: slg51000: Wait after asserting CS pin

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 0b24dfa587c6cc7484cfb170da5c7dd73451f670 ]

Sony's downstream driver [1], among some other changes, adds a
seemingly random 10ms usleep_range, which turned out to be necessary
for the hardware to function properly on at least Sony Xperia 1 IV.
Without this, I2C transactions with the SLG51000 straight up fail.

Relax (10-10ms -> 10-11ms) and add the aforementioned sleep to make
sure the hardware has some time to wake up.

(nagara-2.0.0-mlc/vendor/semc/hardware/camera-kernel-module/)
[1] https://developer.sony.com/file/download/open-source-archive-for-64-0-m-4-29/

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221118131035.54874-1-konrad.dybcio@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/slg51000-regulator.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/regulator/slg51000-regulator.c b/drivers/regulator/slg51000-regulator.c
index 75a941fb3c2b..1b2eee95ad3f 100644
--- a/drivers/regulator/slg51000-regulator.c
+++ b/drivers/regulator/slg51000-regulator.c
@@ -457,6 +457,8 @@ static int slg51000_i2c_probe(struct i2c_client *client)
 		chip->cs_gpiod = cs_gpiod;
 	}
 
+	usleep_range(10000, 11000);
+
 	i2c_set_clientdata(client, chip);
 	chip->chip_irq = client->irq;
 	chip->dev = dev;
-- 
2.35.1

[PATCH AUTOSEL 6.0 22/39] ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 05530ef7cf7c7d700f6753f058999b1b5099a026 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.

seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes
matching snd_seq_dump_func_t. Adjust this and remove the casts. There
are not resulting binary output differences.

This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221118232346.never.380-kees@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_memory.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/sound/core/seq/seq_memory.c b/sound/core/seq/seq_memory.c
index b7aee23fc387..47ef6bc30c0e 100644
--- a/sound/core/seq/seq_memory.c
+++ b/sound/core/seq/seq_memory.c
@@ -113,15 +113,19 @@ EXPORT_SYMBOL(snd_seq_dump_var_event);
  * expand the variable length event to linear buffer space.
  */
 
-static int seq_copy_in_kernel(char **bufptr, const void *src, int size)
+static int seq_copy_in_kernel(void *ptr, void *src, int size)
 {
+	char **bufptr = ptr;
+
 	memcpy(*bufptr, src, size);
 	*bufptr += size;
 	return 0;
 }
 
-static int seq_copy_in_user(char __user **bufptr, const void *src, int size)
+static int seq_copy_in_user(void *ptr, void *src, int size)
 {
+	char __user **bufptr = ptr;
+
 	if (copy_to_user(*bufptr, src, size))
 		return -EFAULT;
 	*bufptr += size;
@@ -151,8 +155,7 @@ int snd_seq_expand_var_event(const struct snd_seq_event *event, int count, char
 		return newlen;
 	}
 	err = snd_seq_dump_var_event(event,
-				     in_kernel ? (snd_seq_dump_func_t)seq_copy_in_kernel :
-				     (snd_seq_dump_func_t)seq_copy_in_user,
+				     in_kernel ? seq_copy_in_kernel : seq_copy_in_user,
 				     &buf);
 	return err < 0 ? err : newlen;
 }
-- 
2.35.1

[PATCH AUTOSEL 6.0 22/39] ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 05530ef7cf7c7d700f6753f058999b1b5099a026 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.

seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes
matching snd_seq_dump_func_t. Adjust this and remove the casts. There
are not resulting binary output differences.

This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221118232346.never.380-kees@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_memory.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/sound/core/seq/seq_memory.c b/sound/core/seq/seq_memory.c
index b7aee23fc387..47ef6bc30c0e 100644
--- a/sound/core/seq/seq_memory.c
+++ b/sound/core/seq/seq_memory.c
@@ -113,15 +113,19 @@ EXPORT_SYMBOL(snd_seq_dump_var_event);
  * expand the variable length event to linear buffer space.
  */
 
-static int seq_copy_in_kernel(char **bufptr, const void *src, int size)
+static int seq_copy_in_kernel(void *ptr, void *src, int size)
 {
+	char **bufptr = ptr;
+
 	memcpy(*bufptr, src, size);
 	*bufptr += size;
 	return 0;
 }
 
-static int seq_copy_in_user(char __user **bufptr, const void *src, int size)
+static int seq_copy_in_user(void *ptr, void *src, int size)
 {
+	char __user **bufptr = ptr;
+
 	if (copy_to_user(*bufptr, src, size))
 		return -EFAULT;
 	*bufptr += size;
@@ -151,8 +155,7 @@ int snd_seq_expand_var_event(const struct snd_seq_event *event, int count, char
 		return newlen;
 	}
 	err = snd_seq_dump_var_event(event,
-				     in_kernel ? (snd_seq_dump_func_t)seq_copy_in_kernel :
-				     (snd_seq_dump_func_t)seq_copy_in_user,
+				     in_kernel ? seq_copy_in_kernel : seq_copy_in_user,
 				     &buf);
 	return err < 0 ? err : newlen;
 }
-- 
2.35.1

[PATCH AUTOSEL 6.0 23/39] LoongArch: Makefile: Use "grep -E" instead of "egrep"

[Sasha Levin]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit 83f638bca0ccd94942bc3c4eb9bcec24dd8a1cf9 ]

The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
	egrep: warning: egrep is obsolescent; using grep -E

Fix this up by changing the LoongArch Makefile to use "grep -E" instead.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/loongarch/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
index ec3de6191276..9123feb69854 100644
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@@ -68,7 +68,7 @@ KBUILD_LDFLAGS	+= -m $(ld-emul)
 
 ifdef CONFIG_LOONGARCH
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
-	egrep -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
+	grep -E -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
 	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
 endif
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 24/39] LoongArch: Combine acpi_boot_table_init() and acpi_boot_init()

[Sasha Levin]

From: Huacai Chen <chenhuacai@loongson.cn>

[ Upstream commit 538eafc6deae12fbac5f277b89aa139b812bca49 ]

Combine acpi_boot_table_init() and acpi_boot_init() since they are very
simple, and we don't need to check the return value of acpi_boot_init().

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/loongarch/kernel/acpi.c  | 31 ++++++++++---------------------
 arch/loongarch/kernel/setup.c |  1 -
 2 files changed, 10 insertions(+), 22 deletions(-)

diff --git a/arch/loongarch/kernel/acpi.c b/arch/loongarch/kernel/acpi.c
index 335398482038..8319cc409009 100644
--- a/arch/loongarch/kernel/acpi.c
+++ b/arch/loongarch/kernel/acpi.c
@@ -56,23 +56,6 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
 		return ioremap_cache(phys, size);
 }
 
-void __init acpi_boot_table_init(void)
-{
-	/*
-	 * If acpi_disabled, bail out
-	 */
-	if (acpi_disabled)
-		return;
-
-	/*
-	 * Initialize the ACPI boot-time table parser.
-	 */
-	if (acpi_table_init()) {
-		disable_acpi();
-		return;
-	}
-}
-
 #ifdef CONFIG_SMP
 static int set_processor_mask(u32 id, u32 flags)
 {
@@ -156,13 +139,21 @@ static void __init acpi_process_madt(void)
 	loongson_sysconf.nr_cpus = num_processors;
 }
 
-int __init acpi_boot_init(void)
+void __init acpi_boot_table_init(void)
 {
 	/*
 	 * If acpi_disabled, bail out
 	 */
 	if (acpi_disabled)
-		return -1;
+		return;
+
+	/*
+	 * Initialize the ACPI boot-time table parser.
+	 */
+	if (acpi_table_init()) {
+		disable_acpi();
+		return;
+	}
 
 	loongson_sysconf.boot_cpu_id = read_csr_cpuid();
 
@@ -173,8 +164,6 @@ int __init acpi_boot_init(void)
 
 	/* Do not enable ACPI SPCR console by default */
 	acpi_parse_spcr(earlycon_acpi_spcr_enable, false);
-
-	return 0;
 }
 
 #ifdef CONFIG_ACPI_NUMA
diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
index 8f5c2f9a1a83..574647e3483d 100644
--- a/arch/loongarch/kernel/setup.c
+++ b/arch/loongarch/kernel/setup.c
@@ -203,7 +203,6 @@ void __init platform_init(void)
 #ifdef CONFIG_ACPI
 	acpi_gbl_use_default_register_widths = false;
 	acpi_boot_table_init();
-	acpi_boot_init();
 #endif
 
 #ifdef CONFIG_NUMA
-- 
2.35.1

[PATCH AUTOSEL 6.0 25/39] LoongArch: Set _PAGE_DIRTY only if _PAGE_MODIFIED is set in {pmd,pte}_mkwrite()

[Sasha Levin]

From: Huacai Chen <chenhuacai@loongson.cn>

[ Upstream commit 54e6cd42a183b602e3627ad3aaeeed44f7443e67 ]

Set _PAGE_DIRTY only if _PAGE_MODIFIED is set in {pmd,pte}_mkwrite().
Otherwise, _PAGE_DIRTY silences the TLB modify exception and make us
have no chance to mark a pmd/pte dirty (_PAGE_MODIFIED) for software.

Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/loongarch/include/asm/pgtable.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/loongarch/include/asm/pgtable.h b/arch/loongarch/include/asm/pgtable.h
index 8ea57e2f0e04..79981ee8a171 100644
--- a/arch/loongarch/include/asm/pgtable.h
+++ b/arch/loongarch/include/asm/pgtable.h
@@ -355,7 +355,9 @@ static inline pte_t pte_mkdirty(pte_t pte)
 
 static inline pte_t pte_mkwrite(pte_t pte)
 {
-	pte_val(pte) |= (_PAGE_WRITE | _PAGE_DIRTY);
+	pte_val(pte) |= _PAGE_WRITE;
+	if (pte_val(pte) & _PAGE_MODIFIED)
+		pte_val(pte) |= _PAGE_DIRTY;
 	return pte;
 }
 
@@ -452,7 +454,9 @@ static inline int pmd_write(pmd_t pmd)
 
 static inline pmd_t pmd_mkwrite(pmd_t pmd)
 {
-	pmd_val(pmd) |= (_PAGE_WRITE | _PAGE_DIRTY);
+	pmd_val(pmd) |= _PAGE_WRITE;
+	if (pmd_val(pmd) & _PAGE_MODIFIED)
+		pmd_val(pmd) |= _PAGE_DIRTY;
 	return pmd;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 26/39] LoongArch: Fix unsigned comparison with less than zero

[Sasha Levin]

From: KaiLong Wang <wangkailong@jari.cn>

[ Upstream commit b96e74bb439f096168c78ba3ba1599e0b85cfd73 ]

Eliminate the following coccicheck warning:

./arch/loongarch/kernel/unwind_prologue.c:84:5-13: WARNING: Unsigned
expression compared with zero: frame_ra < 0

Signed-off-by: KaiLong Wang <wangkailong@jari.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/loongarch/kernel/unwind_prologue.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/loongarch/kernel/unwind_prologue.c b/arch/loongarch/kernel/unwind_prologue.c
index b206d9159205..4571c3c87cd4 100644
--- a/arch/loongarch/kernel/unwind_prologue.c
+++ b/arch/loongarch/kernel/unwind_prologue.c
@@ -43,7 +43,8 @@ static bool unwind_by_prologue(struct unwind_state *state)
 {
 	struct stack_info *info = &state->stack_info;
 	union loongarch_instruction *ip, *ip_end;
-	unsigned long frame_size = 0, frame_ra = -1;
+	long frame_ra = -1;
+	unsigned long frame_size = 0;
 	unsigned long size, offset, pc = state->pc;
 
 	if (state->sp >= info->end || state->sp < info->begin)
-- 
2.35.1

[PATCH AUTOSEL 6.0 27/39] selftests/net: Find nettest in current directory

[Sasha Levin]

From: Daniel Díaz <daniel.diaz@linaro.org>

[ Upstream commit bd5e1e42826f18147afb0ba07e6a815f52cf8bcb ]

The `nettest` binary, built from `selftests/net/nettest.c`,
was expected to be found in the path during test execution of
`fcnal-test.sh` and `pmtu.sh`, leading to tests getting
skipped when the binary is not installed in the system, as can
be seen in these logs found in the wild [1]:

  # TEST: vti4: PMTU exceptions                                         [SKIP]
  [  350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
  [  350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
  # 'nettest' command not found; skipping tests
  #   xfrm6udp not supported
  # TEST: vti6: PMTU exceptions (ESP-in-UDP)                            [SKIP]
  [  351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
  [  351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
  # 'nettest' command not found; skipping tests
  #   xfrm4udp not supported

The `unicast_extensions.sh` tests also rely on `nettest`, but
it runs fine there because it looks for the binary in the
current working directory [2]:

The same mechanism that works for the Unicast extensions tests
is here copied over to the PMTU and functional tests.

[1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221
[2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958

Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/fcnal-test.sh | 11 +++++++----
 tools/testing/selftests/net/pmtu.sh       | 10 ++++++----
 2 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 31c3b6ebd388..21ca91473c09 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -4196,10 +4196,13 @@ elif [ "$TESTS" = "ipv6" ]; then
 	TESTS="$TESTS_IPV6"
 fi
 
-which nettest >/dev/null
-if [ $? -ne 0 ]; then
-	echo "'nettest' command not found; skipping tests"
-	exit $ksft_skip
+# nettest can be run from PATH or from same directory as this selftest
+if ! which nettest >/dev/null; then
+	PATH=$PWD:$PATH
+	if ! which nettest >/dev/null; then
+		echo "'nettest' command not found; skipping tests"
+		exit $ksft_skip
+	fi
 fi
 
 declare -i nfail=0
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index 736e358dc549..dfe3d287f01d 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -686,10 +686,12 @@ setup_xfrm() {
 }
 
 setup_nettest_xfrm() {
-	which nettest >/dev/null
-	if [ $? -ne 0 ]; then
-		echo "'nettest' command not found; skipping tests"
-	        return 1
+	if ! which nettest >/dev/null; then
+		PATH=$PWD:$PATH
+		if ! which nettest >/dev/null; then
+			echo "'nettest' command not found; skipping tests"
+			return 1
+		fi
 	fi
 
 	[ ${1} -eq 6 ] && proto="-6" || proto=""
-- 
2.35.1

[PATCH AUTOSEL 6.0 28/39] btrfs: send: avoid unaligned encoded writes when attempting to clone range

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit a11452a3709e217492798cf3686ac2cc8eb3fb51 ]

When trying to see if we can clone a file range, there are cases where we
end up sending two write operations in case the inode from the source root
has an i_size that is not sector size aligned and the length from the
current offset to its i_size is less than the remaining length we are
trying to clone.

Issuing two write operations when we could instead issue a single write
operation is not incorrect. However it is not optimal, specially if the
extents are compressed and the flag BTRFS_SEND_FLAG_COMPRESSED was passed
to the send ioctl. In that case we can end up sending an encoded write
with an offset that is not sector size aligned, which makes the receiver
fallback to decompressing the data and writing it using regular buffered
IO (so re-compressing the data in case the fs is mounted with compression
enabled), because encoded writes fail with -EINVAL when an offset is not
sector size aligned.

The following example, which triggered a bug in the receiver code for the
fallback logic of decompressing + regular buffer IO and is fixed by the
patchset referred in a Link at the bottom of this changelog, is an example
where we have the non-optimal behaviour due to an unaligned encoded write:

   $ cat test.sh
   #!/bin/bash

   DEV=/dev/sdj
   MNT=/mnt/sdj

   mkfs.btrfs -f $DEV > /dev/null
   mount -o compress $DEV $MNT

   # File foo has a size of 33K, not aligned to the sector size.
   xfs_io -f -c "pwrite -S 0xab 0 33K" $MNT/foo

   xfs_io -f -c "pwrite -S 0xcd 0 64K" $MNT/bar

   # Now clone the first 32K of file bar into foo at offset 0.
   xfs_io -c "reflink $MNT/bar 0 0 32K" $MNT/foo

   # Snapshot the default subvolume and create a full send stream (v2).
   btrfs subvolume snapshot -r $MNT $MNT/snap

   btrfs send --compressed-data -f /tmp/test.send $MNT/snap

   echo -e "\nFile bar in the original filesystem:"
   od -A d -t x1 $MNT/snap/bar

   umount $MNT
   mkfs.btrfs -f $DEV > /dev/null
   mount $DEV $MNT

   echo -e "\nReceiving stream in a new filesystem..."
   btrfs receive -f /tmp/test.send $MNT

   echo -e "\nFile bar in the new filesystem:"
   od -A d -t x1 $MNT/snap/bar

   umount $MNT

Before this patch, the send stream included one regular write and one
encoded write for file 'bar', with the later being not sector size aligned
and causing the receiver to fallback to decompression + buffered writes.
The output of the btrfs receive command in verbose mode (-vvv):

   (...)
   mkfile o258-7-0
   rename o258-7-0 -> bar
   utimes
   clone bar - source=foo source offset=0 offset=0 length=32768
   write bar - offset=32768 length=1024
   encoded_write bar - offset=33792, len=4096, unencoded_offset=33792, unencoded_file_len=31744, unencoded_len=65536, compression=1, encryption=0
   encoded_write bar - falling back to decompress and write due to errno 22 ("Invalid argument")
   (...)

This patch avoids the regular write followed by an unaligned encoded write
so that we end up sending a single encoded write that is aligned. So after
this patch the stream content is (output of btrfs receive -vvv):

   (...)
   mkfile o258-7-0
   rename o258-7-0 -> bar
   utimes
   clone bar - source=foo source offset=0 offset=0 length=32768
   encoded_write bar - offset=32768, len=4096, unencoded_offset=32768, unencoded_file_len=32768, unencoded_len=65536, compression=1, encryption=0
   (...)

So we get more optimal behaviour and avoid the silent data loss bug in
versions of btrfs-progs affected by the bug referred by the Link tag
below (btrfs-progs v5.19, v5.19.1, v6.0 and v6.0.1).

Link: https://lore.kernel.org/linux-btrfs/cover.1668529099.git.fdmanana@suse.com/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/send.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index e7671afcee4f..8cc038460bed 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5615,6 +5615,7 @@ static int clone_range(struct send_ctx *sctx, struct btrfs_path *dst_path,
 		u64 ext_len;
 		u64 clone_len;
 		u64 clone_data_offset;
+		bool crossed_src_i_size = false;
 
 		if (slot >= btrfs_header_nritems(leaf)) {
 			ret = btrfs_next_leaf(clone_root->root, path);
@@ -5672,8 +5673,10 @@ static int clone_range(struct send_ctx *sctx, struct btrfs_path *dst_path,
 		if (key.offset >= clone_src_i_size)
 			break;
 
-		if (key.offset + ext_len > clone_src_i_size)
+		if (key.offset + ext_len > clone_src_i_size) {
 			ext_len = clone_src_i_size - key.offset;
+			crossed_src_i_size = true;
+		}
 
 		clone_data_offset = btrfs_file_extent_offset(leaf, ei);
 		if (btrfs_file_extent_disk_bytenr(leaf, ei) == disk_byte) {
@@ -5734,6 +5737,25 @@ static int clone_range(struct send_ctx *sctx, struct btrfs_path *dst_path,
 				ret = send_clone(sctx, offset, clone_len,
 						 clone_root);
 			}
+		} else if (crossed_src_i_size && clone_len < len) {
+			/*
+			 * If we are at i_size of the clone source inode and we
+			 * can not clone from it, terminate the loop. This is
+			 * to avoid sending two write operations, one with a
+			 * length matching clone_len and the final one after
+			 * this loop with a length of len - clone_len.
+			 *
+			 * When using encoded writes (BTRFS_SEND_FLAG_COMPRESSED
+			 * was passed to the send ioctl), this helps avoid
+			 * sending an encoded write for an offset that is not
+			 * sector size aligned, in case the i_size of the source
+			 * inode is not sector size aligned. That will make the
+			 * receiver fallback to decompression of the data and
+			 * writing it using regular buffered IO, therefore while
+			 * not incorrect, it's not optimal due decompression and
+			 * possible re-compression at the receiver.
+			 */
+			break;
 		} else {
 			ret = send_extent_data(sctx, dst_path, offset,
 					       clone_len);
-- 
2.35.1

[PATCH AUTOSEL 6.0 29/39] net/mlx5: Lag, avoid lockdep warnings

[Sasha Levin]

From: Eli Cohen <elic@nvidia.com>

[ Upstream commit 0d4e8ed139d871fcb2844dd71075997753baeec8 ]

ldev->lock is used to serialize lag change operations. Since multiport
eswtich functionality was added, we now change the mode dynamically.
However, acquiring ldev->lock is not allowed as it could possibly lead
to a deadlock as reported by the lockdep mechanism.

[  836.154963] WARNING: possible circular locking dependency detected
[  836.155850] 5.19.0-rc5_net_56b7df2 #1 Not tainted
[  836.156549] ------------------------------------------------------
[  836.157418] handler1/12198 is trying to acquire lock:
[  836.158178] ffff888187d52b58 (&ldev->lock){+.+.}-{3:3}, at: mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[  836.159575]
[  836.159575] but task is already holding lock:
[  836.160474] ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[  836.161669] which lock already depends on the new lock.
[  836.162905]
[  836.162905] the existing dependency chain (in reverse order) is:
[  836.164008] -> #3 (&block->cb_lock){++++}-{3:3}:
[  836.164946]        down_write+0x25/0x60
[  836.165548]        tcf_block_get_ext+0x1c6/0x5d0
[  836.166253]        ingress_init+0x74/0xa0 [sch_ingress]
[  836.167028]        qdisc_create.constprop.0+0x130/0x5e0
[  836.167805]        tc_modify_qdisc+0x481/0x9f0
[  836.168490]        rtnetlink_rcv_msg+0x16e/0x5a0
[  836.169189]        netlink_rcv_skb+0x4e/0xf0
[  836.169861]        netlink_unicast+0x190/0x250
[  836.170543]        netlink_sendmsg+0x243/0x4b0
[  836.171226]        sock_sendmsg+0x33/0x40
[  836.171860]        ____sys_sendmsg+0x1d1/0x1f0
[  836.172535]        ___sys_sendmsg+0xab/0xf0
[  836.173183]        __sys_sendmsg+0x51/0x90
[  836.173836]        do_syscall_64+0x3d/0x90
[  836.174471]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  836.175282]

[  836.175282] -> #2 (rtnl_mutex){+.+.}-{3:3}:
[  836.176190]        __mutex_lock+0x6b/0xf80
[  836.176830]        register_netdevice_notifier+0x21/0x120
[  836.177631]        rtnetlink_init+0x2d/0x1e9
[  836.178289]        netlink_proto_init+0x163/0x179
[  836.178994]        do_one_initcall+0x63/0x300
[  836.179672]        kernel_init_freeable+0x2cb/0x31b
[  836.180403]        kernel_init+0x17/0x140
[  836.181035]        ret_from_fork+0x1f/0x30

 [  836.181687] -> #1 (pernet_ops_rwsem){+.+.}-{3:3}:
[  836.182628]        down_write+0x25/0x60
[  836.183235]        unregister_netdevice_notifier+0x1c/0xb0
[  836.184029]        mlx5_ib_roce_cleanup+0x94/0x120 [mlx5_ib]
[  836.184855]        __mlx5_ib_remove+0x35/0x60 [mlx5_ib]
[  836.185637]        mlx5_eswitch_unregister_vport_reps+0x22f/0x440 [mlx5_core]
[  836.186698]        auxiliary_bus_remove+0x18/0x30
[  836.187409]        device_release_driver_internal+0x1f6/0x270
[  836.188253]        bus_remove_device+0xef/0x160
[  836.188939]        device_del+0x18b/0x3f0
[  836.189562]        mlx5_rescan_drivers_locked+0xd6/0x2d0 [mlx5_core]
[  836.190516]        mlx5_lag_remove_devices+0x69/0xe0 [mlx5_core]
[  836.191414]        mlx5_do_bond_work+0x441/0x620 [mlx5_core]
[  836.192278]        process_one_work+0x25c/0x590
[  836.192963]        worker_thread+0x4f/0x3d0
[  836.193609]        kthread+0xcb/0xf0
[  836.194189]        ret_from_fork+0x1f/0x30

[  836.194826] -> #0 (&ldev->lock){+.+.}-{3:3}:
[  836.195734]        __lock_acquire+0x15b8/0x2a10
[  836.196426]        lock_acquire+0xce/0x2d0
[  836.197057]        __mutex_lock+0x6b/0xf80
[  836.197708]        mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[  836.198575]        tc_act_parse_mirred+0x25b/0x800 [mlx5_core]
[  836.199467]        parse_tc_actions+0x168/0x5a0 [mlx5_core]
[  836.200340]        __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core]
[  836.201241]        mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core]
[  836.202187]        tc_setup_cb_add+0xd7/0x200
[  836.202856]        fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[  836.203739]        fl_change+0xbbe/0x1730 [cls_flower]
[  836.204501]        tc_new_tfilter+0x407/0xd90
[  836.205168]        rtnetlink_rcv_msg+0x406/0x5a0
[  836.205877]        netlink_rcv_skb+0x4e/0xf0
[  836.206535]        netlink_unicast+0x190/0x250
[  836.207217]        netlink_sendmsg+0x243/0x4b0
[  836.207915]        sock_sendmsg+0x33/0x40
[  836.208538]        ____sys_sendmsg+0x1d1/0x1f0
[  836.209219]        ___sys_sendmsg+0xab/0xf0
[  836.209878]        __sys_sendmsg+0x51/0x90
[  836.210510]        do_syscall_64+0x3d/0x90
[  836.211137]        entry_SYSCALL_64_after_hwframe+0x46/0xb0

[  836.211954] other info that might help us debug this:
[  836.213174] Chain exists of:
[  836.213174]   &ldev->lock --> rtnl_mutex --> &block->cb_lock
   836.214650]  Possible unsafe locking scenario:
[  836.214650]
[  836.215574]        CPU0                    CPU1
[  836.216255]        ----                    ----
[  836.216943]   lock(&block->cb_lock);
[  836.217518]                                lock(rtnl_mutex);
[  836.218348]                                lock(&block->cb_lock);
[  836.219212]   lock(&ldev->lock);
[  836.219758]
[  836.219758]  *** DEADLOCK ***
[  836.219758]
 [  836.220747] 2 locks held by handler1/12198:
[  836.221390]  #0: ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[  836.222646]  #1: ffff88810c9a92c0 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core]

[  836.224063] stack backtrace:
[  836.224799] CPU: 6 PID: 12198 Comm: handler1 Not tainted 5.19.0-rc5_net_56b7df2 #1
[  836.225923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  836.227476] Call Trace:
[  836.227929]  <TASK>
[  836.228332]  dump_stack_lvl+0x57/0x7d
[  836.228924]  check_noncircular+0x104/0x120
[  836.229562]  __lock_acquire+0x15b8/0x2a10
[  836.230201]  lock_acquire+0xce/0x2d0
[  836.230776]  ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[  836.231614]  ? find_held_lock+0x2b/0x80
[  836.232221]  __mutex_lock+0x6b/0xf80
[  836.232799]  ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[  836.233636]  ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[  836.234451]  ? xa_load+0xc3/0x190
[  836.234995]  mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[  836.235803]  tc_act_parse_mirred+0x25b/0x800 [mlx5_core]
[  836.236636]  ? tc_act_can_offload_mirred+0x135/0x210 [mlx5_core]
[  836.237550]  parse_tc_actions+0x168/0x5a0 [mlx5_core]
[  836.238364]  __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core]
[  836.239202]  mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core]
[  836.240076]  ? lock_acquire+0xce/0x2d0
[  836.240668]  ? tc_setup_cb_add+0x5b/0x200
[  836.241294]  tc_setup_cb_add+0xd7/0x200
[  836.241917]  fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[  836.242709]  fl_change+0xbbe/0x1730 [cls_flower]
[  836.243408]  tc_new_tfilter+0x407/0xd90
[  836.244043]  ? tc_del_tfilter+0x880/0x880
[  836.244672]  rtnetlink_rcv_msg+0x406/0x5a0
[  836.245310]  ? netlink_deliver_tap+0x7a/0x4b0
[  836.245991]  ? if_nlmsg_stats_size+0x2b0/0x2b0
[  836.246675]  netlink_rcv_skb+0x4e/0xf0
[  836.258046]  netlink_unicast+0x190/0x250
[  836.258669]  netlink_sendmsg+0x243/0x4b0
[  836.259288]  sock_sendmsg+0x33/0x40
[  836.259857]  ____sys_sendmsg+0x1d1/0x1f0
[  836.260473]  ___sys_sendmsg+0xab/0xf0
[  836.261064]  ? lock_acquire+0xce/0x2d0
[  836.261669]  ? find_held_lock+0x2b/0x80
[  836.262272]  ? __fget_files+0xb9/0x190
[  836.262871]  ? __fget_files+0xd3/0x190
[  836.263462]  __sys_sendmsg+0x51/0x90
[  836.264064]  do_syscall_64+0x3d/0x90
[  836.264652]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  836.265425] RIP: 0033:0x7fdbe5e2677d

[  836.266012] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ba ee
ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 ee ee ff ff 48
[  836.268485] RSP: 002b:00007fdbe48a75a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[  836.269598] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fdbe5e2677d
[  836.270576] RDX: 0000000000000000 RSI: 00007fdbe48a7640 RDI: 000000000000003c
[  836.271565] RBP: 00007fdbe48a8368 R08: 0000000000000000 R09: 0000000000000000
[  836.272546] R10: 00007fdbe48a84b0 R11: 0000000000000293 R12: 0000557bd17dc860
[  836.273527] R13: 0000000000000000 R14: 0000557bd17dc860 R15: 00007fdbe48a7640

[  836.274521]  </TASK>

To avoid using mode holding ldev->lock in the configure flow, we queue a
work to the lag workqueue and cease wait on a completion object.

In addition, we remove the lock from mlx5_lag_do_mirred() since it is
not really protecting anything.

It should be noted that an actual deadlock has not been observed.

Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/lag/lag.c |   3 +-
 .../net/ethernet/mellanox/mlx5/core/lag/lag.h |  14 ++-
 .../ethernet/mellanox/mlx5/core/lag/mpesw.c   | 100 +++++++++++-------
 .../ethernet/mellanox/mlx5/core/lag/mpesw.h   |   1 -
 4 files changed, 78 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
index 065102278cb8..7e139df1305f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
@@ -201,9 +201,8 @@ static void mlx5_ldev_free(struct kref *ref)
 	if (ldev->nb.notifier_call)
 		unregister_netdevice_notifier_net(&init_net, &ldev->nb);
 	mlx5_lag_mp_cleanup(ldev);
-	mlx5_lag_mpesw_cleanup(ldev);
-	cancel_work_sync(&ldev->mpesw_work);
 	destroy_workqueue(ldev->wq);
+	mlx5_lag_mpesw_cleanup(ldev);
 	mutex_destroy(&ldev->lock);
 	kfree(ldev);
 }
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h
index ce2ce8ccbd70..f30ac2de639f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h
@@ -50,6 +50,19 @@ struct lag_tracker {
 	enum netdev_lag_hash hash_type;
 };
 
+enum mpesw_op {
+	MLX5_MPESW_OP_ENABLE,
+	MLX5_MPESW_OP_DISABLE,
+};
+
+struct mlx5_mpesw_work_st {
+	struct work_struct work;
+	struct mlx5_lag    *lag;
+	enum mpesw_op	   op;
+	struct completion  comp;
+	int result;
+};
+
 /* LAG data of a ConnectX card.
  * It serves both its phys functions.
  */
@@ -66,7 +79,6 @@ struct mlx5_lag {
 	struct lag_tracker        tracker;
 	struct workqueue_struct   *wq;
 	struct delayed_work       bond_work;
-	struct work_struct	  mpesw_work;
 	struct notifier_block     nb;
 	struct lag_mp             lag_mp;
 	struct mlx5_lag_port_sel  port_sel;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c
index f643202b29c6..c17e8f1ec914 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c
@@ -7,63 +7,95 @@
 #include "eswitch.h"
 #include "lib/mlx5.h"
 
-void mlx5_mpesw_work(struct work_struct *work)
+static int add_mpesw_rule(struct mlx5_lag *ldev)
 {
-	struct mlx5_lag *ldev = container_of(work, struct mlx5_lag, mpesw_work);
+	struct mlx5_core_dev *dev = ldev->pf[MLX5_LAG_P1].dev;
+	int err;
 
-	mutex_lock(&ldev->lock);
-	mlx5_disable_lag(ldev);
-	mutex_unlock(&ldev->lock);
-}
+	if (atomic_add_return(1, &ldev->lag_mpesw.mpesw_rule_count) != 1)
+		return 0;
 
-static void mlx5_lag_disable_mpesw(struct mlx5_core_dev *dev)
-{
-	struct mlx5_lag *ldev = dev->priv.lag;
+	if (ldev->mode != MLX5_LAG_MODE_NONE) {
+		err = -EINVAL;
+		goto out_err;
+	}
 
-	if (!queue_work(ldev->wq, &ldev->mpesw_work))
-		mlx5_core_warn(dev, "failed to queue work\n");
+	err = mlx5_activate_lag(ldev, NULL, MLX5_LAG_MODE_MPESW, false);
+	if (err) {
+		mlx5_core_warn(dev, "Failed to create LAG in MPESW mode (%d)\n", err);
+		goto out_err;
+	}
+
+	return 0;
+
+out_err:
+	atomic_dec(&ldev->lag_mpesw.mpesw_rule_count);
+	return err;
 }
 
-void mlx5_lag_del_mpesw_rule(struct mlx5_core_dev *dev)
+static void del_mpesw_rule(struct mlx5_lag *ldev)
 {
-	struct mlx5_lag *ldev = dev->priv.lag;
+	if (!atomic_dec_return(&ldev->lag_mpesw.mpesw_rule_count) &&
+	    ldev->mode == MLX5_LAG_MODE_MPESW)
+		mlx5_disable_lag(ldev);
+}
 
-	if (!ldev)
-		return;
+static void mlx5_mpesw_work(struct work_struct *work)
+{
+	struct mlx5_mpesw_work_st *mpesww = container_of(work, struct mlx5_mpesw_work_st, work);
+	struct mlx5_lag *ldev = mpesww->lag;
 
 	mutex_lock(&ldev->lock);
-	if (!atomic_dec_return(&ldev->lag_mpesw.mpesw_rule_count) &&
-	    ldev->mode == MLX5_LAG_MODE_MPESW)
-		mlx5_lag_disable_mpesw(dev);
+	if (mpesww->op == MLX5_MPESW_OP_ENABLE)
+		mpesww->result = add_mpesw_rule(ldev);
+	else if (mpesww->op == MLX5_MPESW_OP_DISABLE)
+		del_mpesw_rule(ldev);
 	mutex_unlock(&ldev->lock);
+
+	complete(&mpesww->comp);
 }
 
-int mlx5_lag_add_mpesw_rule(struct mlx5_core_dev *dev)
+static int mlx5_lag_mpesw_queue_work(struct mlx5_core_dev *dev,
+				     enum mpesw_op op)
 {
 	struct mlx5_lag *ldev = dev->priv.lag;
+	struct mlx5_mpesw_work_st *work;
 	int err = 0;
 
 	if (!ldev)
 		return 0;
 
-	mutex_lock(&ldev->lock);
-	if (atomic_add_return(1, &ldev->lag_mpesw.mpesw_rule_count) != 1)
-		goto out;
+	work = kzalloc(sizeof(*work), GFP_KERNEL);
+	if (!work)
+		return -ENOMEM;
 
-	if (ldev->mode != MLX5_LAG_MODE_NONE) {
+	INIT_WORK(&work->work, mlx5_mpesw_work);
+	init_completion(&work->comp);
+	work->op = op;
+	work->lag = ldev;
+
+	if (!queue_work(ldev->wq, &work->work)) {
+		mlx5_core_warn(dev, "failed to queue mpesw work\n");
 		err = -EINVAL;
 		goto out;
 	}
-
-	err = mlx5_activate_lag(ldev, NULL, MLX5_LAG_MODE_MPESW, false);
-	if (err)
-		mlx5_core_warn(dev, "Failed to create LAG in MPESW mode (%d)\n", err);
-
+	wait_for_completion(&work->comp);
+	err = work->result;
 out:
-	mutex_unlock(&ldev->lock);
+	kfree(work);
 	return err;
 }
 
+void mlx5_lag_del_mpesw_rule(struct mlx5_core_dev *dev)
+{
+	mlx5_lag_mpesw_queue_work(dev, MLX5_MPESW_OP_DISABLE);
+}
+
+int mlx5_lag_add_mpesw_rule(struct mlx5_core_dev *dev)
+{
+	return mlx5_lag_mpesw_queue_work(dev, MLX5_MPESW_OP_ENABLE);
+}
+
 int mlx5_lag_do_mirred(struct mlx5_core_dev *mdev, struct net_device *out_dev)
 {
 	struct mlx5_lag *ldev = mdev->priv.lag;
@@ -71,12 +103,9 @@ int mlx5_lag_do_mirred(struct mlx5_core_dev *mdev, struct net_device *out_dev)
 	if (!netif_is_bond_master(out_dev) || !ldev)
 		return 0;
 
-	mutex_lock(&ldev->lock);
-	if (ldev->mode == MLX5_LAG_MODE_MPESW) {
-		mutex_unlock(&ldev->lock);
+	if (ldev->mode == MLX5_LAG_MODE_MPESW)
 		return -EOPNOTSUPP;
-	}
-	mutex_unlock(&ldev->lock);
+
 	return 0;
 }
 
@@ -90,11 +119,10 @@ bool mlx5_lag_mpesw_is_activated(struct mlx5_core_dev *dev)
 
 void mlx5_lag_mpesw_init(struct mlx5_lag *ldev)
 {
-	INIT_WORK(&ldev->mpesw_work, mlx5_mpesw_work);
 	atomic_set(&ldev->lag_mpesw.mpesw_rule_count, 0);
 }
 
 void mlx5_lag_mpesw_cleanup(struct mlx5_lag *ldev)
 {
-	cancel_delayed_work_sync(&ldev->bond_work);
+	WARN_ON(atomic_read(&ldev->lag_mpesw.mpesw_rule_count));
 }
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.h b/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.h
index be4abcb8fcd5..88e8daffcf92 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.h
@@ -12,7 +12,6 @@ struct lag_mpesw {
 	atomic_t mpesw_rule_count;
 };
 
-void mlx5_mpesw_work(struct work_struct *work);
 int mlx5_lag_do_mirred(struct mlx5_core_dev *mdev, struct net_device *out_dev);
 bool mlx5_lag_mpesw_is_activated(struct mlx5_core_dev *dev);
 #if IS_ENABLED(CONFIG_MLX5_ESWITCH)
-- 
2.35.1

[PATCH AUTOSEL 6.0 30/39] ASoC: soc-pcm: Add NULL check in BE reparenting

[Sasha Levin]

From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>

[ Upstream commit db8f91d424fe0ea6db337aca8bc05908bbce1498 ]

Add NULL check in dpcm_be_reparent API, to handle
kernel NULL pointer dereference error.
The issue occurred in fuzzing test.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1669098673-29703-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-pcm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 4d9b91e7e14f..91a1bfe00d9b 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1247,6 +1247,8 @@ static void dpcm_be_reparent(struct snd_soc_pcm_runtime *fe,
 		return;
 
 	be_substream = snd_soc_dpcm_get_substream(be, stream);
+	if (!be_substream)
+		return;
 
 	for_each_dpcm_fe(be, stream, dpcm) {
 		if (dpcm->fe == fe)
-- 
2.35.1

[PATCH AUTOSEL 6.0 30/39] ASoC: soc-pcm: Add NULL check in BE reparenting

[Sasha Levin]

From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>

[ Upstream commit db8f91d424fe0ea6db337aca8bc05908bbce1498 ]

Add NULL check in dpcm_be_reparent API, to handle
kernel NULL pointer dereference error.
The issue occurred in fuzzing test.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1669098673-29703-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-pcm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 4d9b91e7e14f..91a1bfe00d9b 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1247,6 +1247,8 @@ static void dpcm_be_reparent(struct snd_soc_pcm_runtime *fe,
 		return;
 
 	be_substream = snd_soc_dpcm_get_substream(be, stream);
+	if (!be_substream)
+		return;
 
 	for_each_dpcm_fe(be, stream, dpcm) {
 		if (dpcm->fe == fe)
-- 
2.35.1

[PATCH AUTOSEL 6.0 31/39] regulator: twl6030: fix get status of twl6032 regulators

[Sasha Levin]

From: Andreas Kemnade <andreas@kemnade.info>

[ Upstream commit 31a6297b89aabc81b274c093a308a7f5b55081a7 ]

Status is reported as always off in the 6032 case. Status
reporting now matches the logic in the setters. Once of
the differences to the 6030 is that there are no groups,
therefore the state needs to be read out in the lower bits.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221120221208.3093727-3-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/twl6030-regulator.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c
index 430265c404d6..7ee05556d783 100644
--- a/drivers/regulator/twl6030-regulator.c
+++ b/drivers/regulator/twl6030-regulator.c
@@ -67,6 +67,7 @@ struct twlreg_info {
 #define TWL6030_CFG_STATE_SLEEP	0x03
 #define TWL6030_CFG_STATE_GRP_SHIFT	5
 #define TWL6030_CFG_STATE_APP_SHIFT	2
+#define TWL6030_CFG_STATE_MASK		0x03
 #define TWL6030_CFG_STATE_APP_MASK	(0x03 << TWL6030_CFG_STATE_APP_SHIFT)
 #define TWL6030_CFG_STATE_APP(v)	(((v) & TWL6030_CFG_STATE_APP_MASK) >>\
 						TWL6030_CFG_STATE_APP_SHIFT)
@@ -128,13 +129,14 @@ static int twl6030reg_is_enabled(struct regulator_dev *rdev)
 		if (grp < 0)
 			return grp;
 		grp &= P1_GRP_6030;
+		val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
+		val = TWL6030_CFG_STATE_APP(val);
 	} else {
+		val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
+		val &= TWL6030_CFG_STATE_MASK;
 		grp = 1;
 	}
 
-	val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
-	val = TWL6030_CFG_STATE_APP(val);
-
 	return grp && (val == TWL6030_CFG_STATE_ON);
 }
 
@@ -187,7 +189,12 @@ static int twl6030reg_get_status(struct regulator_dev *rdev)
 
 	val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
 
-	switch (TWL6030_CFG_STATE_APP(val)) {
+	if (info->features & TWL6032_SUBCLASS)
+		val &= TWL6030_CFG_STATE_MASK;
+	else
+		val = TWL6030_CFG_STATE_APP(val);
+
+	switch (val) {
 	case TWL6030_CFG_STATE_ON:
 		return REGULATOR_STATUS_NORMAL;
 
-- 
2.35.1

[PATCH AUTOSEL 6.0 32/39] fbcon: Use kzalloc() in fbcon_prepare_logo()

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit a6a00d7e8ffd78d1cdb7a43f1278f081038c638f ]

A kernel built with syzbot's config file reported that

  scr_memcpyw(q, save, array3_size(logo_lines, new_cols, 2))

causes uninitialized "save" to be copied.

  ----------
  [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
  [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
  Console: switching to colour frame buffer device 128x48
  =====================================================
  BUG: KMSAN: uninit-value in do_update_region+0x4b8/0xba0
   do_update_region+0x4b8/0xba0
   update_region+0x40d/0x840
   fbcon_switch+0x3364/0x35e0
   redraw_screen+0xae3/0x18a0
   do_bind_con_driver+0x1cb3/0x1df0
   do_take_over_console+0x11cb/0x13f0
   fbcon_fb_registered+0xacc/0xfd0
   register_framebuffer+0x1179/0x1320
   __drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
   drm_fbdev_client_hotplug+0xbea/0xda0
   drm_fbdev_generic_setup+0x65e/0x9d0
   vkms_init+0x9f3/0xc76
   (...snipped...)

  Uninit was stored to memory at:
   fbcon_prepare_logo+0x143b/0x1940
   fbcon_init+0x2c1b/0x31c0
   visual_init+0x3e7/0x820
   do_bind_con_driver+0x14a4/0x1df0
   do_take_over_console+0x11cb/0x13f0
   fbcon_fb_registered+0xacc/0xfd0
   register_framebuffer+0x1179/0x1320
   __drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
   drm_fbdev_client_hotplug+0xbea/0xda0
   drm_fbdev_generic_setup+0x65e/0x9d0
   vkms_init+0x9f3/0xc76
   (...snipped...)

  Uninit was created at:
   __kmem_cache_alloc_node+0xb69/0x1020
   __kmalloc+0x379/0x680
   fbcon_prepare_logo+0x704/0x1940
   fbcon_init+0x2c1b/0x31c0
   visual_init+0x3e7/0x820
   do_bind_con_driver+0x14a4/0x1df0
   do_take_over_console+0x11cb/0x13f0
   fbcon_fb_registered+0xacc/0xfd0
   register_framebuffer+0x1179/0x1320
   __drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
   drm_fbdev_client_hotplug+0xbea/0xda0
   drm_fbdev_generic_setup+0x65e/0x9d0
   vkms_init+0x9f3/0xc76
   (...snipped...)

  CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc4-00356-g8f2975c2bb4c #924
  Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
  ----------

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cad03d25-0ea0-32c4-8173-fd1895314bce@I-love.SAKURA.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbcon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 098b62f7b701..c0143d38df83 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -577,7 +577,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
 		if (scr_readw(r) != vc->vc_video_erase_char)
 			break;
 	if (r != q && new_rows >= rows + logo_lines) {
-		save = kmalloc(array3_size(logo_lines, new_cols, 2),
+		save = kzalloc(array3_size(logo_lines, new_cols, 2),
 			       GFP_KERNEL);
 		if (save) {
 			int i = min(cols, new_cols);
-- 
2.35.1

[PATCH AUTOSEL 6.0 32/39] fbcon: Use kzalloc() in fbcon_prepare_logo()

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit a6a00d7e8ffd78d1cdb7a43f1278f081038c638f ]

A kernel built with syzbot's config file reported that

  scr_memcpyw(q, save, array3_size(logo_lines, new_cols, 2))

causes uninitialized "save" to be copied.

  ----------
  [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
  [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
  Console: switching to colour frame buffer device 128x48
  =====================================================
  BUG: KMSAN: uninit-value in do_update_region+0x4b8/0xba0
   do_update_region+0x4b8/0xba0
   update_region+0x40d/0x840
   fbcon_switch+0x3364/0x35e0
   redraw_screen+0xae3/0x18a0
   do_bind_con_driver+0x1cb3/0x1df0
   do_take_over_console+0x11cb/0x13f0
   fbcon_fb_registered+0xacc/0xfd0
   register_framebuffer+0x1179/0x1320
   __drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
   drm_fbdev_client_hotplug+0xbea/0xda0
   drm_fbdev_generic_setup+0x65e/0x9d0
   vkms_init+0x9f3/0xc76
   (...snipped...)

  Uninit was stored to memory at:
   fbcon_prepare_logo+0x143b/0x1940
   fbcon_init+0x2c1b/0x31c0
   visual_init+0x3e7/0x820
   do_bind_con_driver+0x14a4/0x1df0
   do_take_over_console+0x11cb/0x13f0
   fbcon_fb_registered+0xacc/0xfd0
   register_framebuffer+0x1179/0x1320
   __drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
   drm_fbdev_client_hotplug+0xbea/0xda0
   drm_fbdev_generic_setup+0x65e/0x9d0
   vkms_init+0x9f3/0xc76
   (...snipped...)

  Uninit was created at:
   __kmem_cache_alloc_node+0xb69/0x1020
   __kmalloc+0x379/0x680
   fbcon_prepare_logo+0x704/0x1940
   fbcon_init+0x2c1b/0x31c0
   visual_init+0x3e7/0x820
   do_bind_con_driver+0x14a4/0x1df0
   do_take_over_console+0x11cb/0x13f0
   fbcon_fb_registered+0xacc/0xfd0
   register_framebuffer+0x1179/0x1320
   __drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
   drm_fbdev_client_hotplug+0xbea/0xda0
   drm_fbdev_generic_setup+0x65e/0x9d0
   vkms_init+0x9f3/0xc76
   (...snipped...)

  CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc4-00356-g8f2975c2bb4c #924
  Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
  ----------

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cad03d25-0ea0-32c4-8173-fd1895314bce@I-love.SAKURA.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbcon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 098b62f7b701..c0143d38df83 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -577,7 +577,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
 		if (scr_readw(r) != vc->vc_video_erase_char)
 			break;
 	if (r != q && new_rows >= rows + logo_lines) {
-		save = kmalloc(array3_size(logo_lines, new_cols, 2),
+		save = kzalloc(array3_size(logo_lines, new_cols, 2),
 			       GFP_KERNEL);
 		if (save) {
 			int i = min(cols, new_cols);
-- 
2.35.1

[PATCH AUTOSEL 6.0 33/39] usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer

[Sasha Levin]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit 3aa07f72894d209fcf922ad686cbb28cf005aaad ]

If there's a disconnection while operating in eSS, there may be a delay
in VBUS drop response from the connector. In that case, the internal
link state may drop to operate in usb2 speed while the controller thinks
the VBUS is still high. The driver must make sure to disable
GUSB2PHYCFG.SUSPHY when sending endpoint command while in usb2 speed.
The End Transfer command may be called, and only that command needs to
go through at this point. Let's keep it simple and unconditionally
disable GUSB2PHYCFG.SUSPHY whenever we issue the command.

This scenario is not seen in real hardware. In a rare case, our
prototype type-c controller/interface may have a slow response
triggerring this issue.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/5651117207803c26e2f22ddf4e5ce9e865dcf7c7.1668045468.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0ed9826a4c47..480cc22e438a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -291,7 +291,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
 	 *
 	 * DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2
 	 */
-	if (dwc->gadget->speed <= USB_SPEED_HIGH) {
+	if (dwc->gadget->speed <= USB_SPEED_HIGH ||
+	    DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 		if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
 			saved_config |= DWC3_GUSB2PHYCFG_SUSPHY;
-- 
2.35.1

[PATCH AUTOSEL 6.0 34/39] 9p/xen: check logical size for buffer size

[Sasha Levin]

From: Dominique Martinet <asmadeus@codewreck.org>

[ Upstream commit 391c18cf776eb4569ecda1f7794f360fe0a45a26 ]

trans_xen did not check the data fits into the buffer before copying
from the xen ring, but we probably should.
Add a check that just skips the request and return an error to
userspace if it did not fit

Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Link: https://lkml.kernel.org/r/20221118135542.63400-1-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_xen.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c
index 227f89cc7237..0f862d5a5960 100644
--- a/net/9p/trans_xen.c
+++ b/net/9p/trans_xen.c
@@ -208,6 +208,14 @@ static void p9_xen_response(struct work_struct *work)
 			continue;
 		}
 
+		if (h.size > req->rc.capacity) {
+			dev_warn(&priv->dev->dev,
+				 "requested packet size too big: %d for tag %d with capacity %zd\n",
+				 h.size, h.tag, req->rc.capacity);
+			req->status = REQ_STATUS_ERROR;
+			goto recv_error;
+		}
+
 		memcpy(&req->rc, &h, sizeof(h));
 		req->rc.offset = 0;
 
@@ -217,6 +225,7 @@ static void p9_xen_response(struct work_struct *work)
 				     masked_prod, &masked_cons,
 				     XEN_9PFS_RING_SIZE(ring));
 
+recv_error:
 		virt_mb();
 		cons += h.size;
 		ring->intf->in_cons = cons;
-- 
2.35.1

[PATCH AUTOSEL 6.0 35/39] net: usb: qmi_wwan: add u-blox 0x1342 composition

[Sasha Levin]

From: Davide Tronchin <davide.tronchin.94@gmail.com>

[ Upstream commit a487069e11b6527373f7c6f435d8998051d0b5d9 ]

Add RmNet support for LARA-L6.

LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface

In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface

Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 26c34a7c21bd..c0f7def66b2d 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1422,6 +1422,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)},	/* Foxconn T77W968 LTE */
 	{QMI_FIXED_INTF(0x0489, 0xe0b5, 0)},	/* Foxconn T77W968 LTE with eSIM support*/
 	{QMI_FIXED_INTF(0x2692, 0x9025, 4)},    /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */
+	{QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)},	/* u-blox LARA-L6 */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-- 
2.35.1

[PATCH AUTOSEL 6.0 36/39] drm/amd/display: Use viewport height for subvp mall allocation size

[Sasha Levin]

From: Dillon Varone <Dillon.Varone@amd.com>

[ Upstream commit dd2c028c1395d622df7ddd6837f8ab2dc94008ee ]

[WHY?]
MALL allocation size depends on the viewport height, not the addressable
vertical lines, which will not match when scaling.

[HOW?]
Base MALL allocation size calculations off viewport height.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
index 13cd1f2e50ca..902c69d126d5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
@@ -101,7 +101,7 @@ uint32_t dcn32_helper_calculate_num_ways_for_subvp(struct dc *dc, struct dc_stat
 			mall_alloc_width_blk_aligned = full_vp_width_blk_aligned;
 
 			/* mall_alloc_height_blk_aligned_l/c = CEILING(sub_vp_height_l/c - 1, blk_height_l/c) + blk_height_l/c */
-			mall_alloc_height_blk_aligned = (pipe->stream->timing.v_addressable - 1 + mblk_height - 1) /
+			mall_alloc_height_blk_aligned = (pipe->plane_res.scl_data.viewport.height - 1 + mblk_height - 1) /
 					mblk_height * mblk_height + mblk_height;
 
 			/* full_mblk_width_ub_l/c = mall_alloc_width_blk_aligned_l/c;
-- 
2.35.1

[PATCH AUTOSEL 6.0 36/39] drm/amd/display: Use viewport height for subvp mall allocation size

[Sasha Levin]

From: Dillon Varone <Dillon.Varone@amd.com>

[ Upstream commit dd2c028c1395d622df7ddd6837f8ab2dc94008ee ]

[WHY?]
MALL allocation size depends on the viewport height, not the addressable
vertical lines, which will not match when scaling.

[HOW?]
Base MALL allocation size calculations off viewport height.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
index 13cd1f2e50ca..902c69d126d5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
@@ -101,7 +101,7 @@ uint32_t dcn32_helper_calculate_num_ways_for_subvp(struct dc *dc, struct dc_stat
 			mall_alloc_width_blk_aligned = full_vp_width_blk_aligned;
 
 			/* mall_alloc_height_blk_aligned_l/c = CEILING(sub_vp_height_l/c - 1, blk_height_l/c) + blk_height_l/c */
-			mall_alloc_height_blk_aligned = (pipe->stream->timing.v_addressable - 1 + mblk_height - 1) /
+			mall_alloc_height_blk_aligned = (pipe->plane_res.scl_data.viewport.height - 1 + mblk_height - 1) /
 					mblk_height * mblk_height + mblk_height;
 
 			/* full_mblk_width_ub_l/c = mall_alloc_width_blk_aligned_l/c;
-- 
2.35.1

[PATCH AUTOSEL 6.0 36/39] drm/amd/display: Use viewport height for subvp mall allocation size

[Sasha Levin]

From: Dillon Varone <Dillon.Varone@amd.com>

[ Upstream commit dd2c028c1395d622df7ddd6837f8ab2dc94008ee ]

[WHY?]
MALL allocation size depends on the viewport height, not the addressable
vertical lines, which will not match when scaling.

[HOW?]
Base MALL allocation size calculations off viewport height.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
index 13cd1f2e50ca..902c69d126d5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
@@ -101,7 +101,7 @@ uint32_t dcn32_helper_calculate_num_ways_for_subvp(struct dc *dc, struct dc_stat
 			mall_alloc_width_blk_aligned = full_vp_width_blk_aligned;
 
 			/* mall_alloc_height_blk_aligned_l/c = CEILING(sub_vp_height_l/c - 1, blk_height_l/c) + blk_height_l/c */
-			mall_alloc_height_blk_aligned = (pipe->stream->timing.v_addressable - 1 + mblk_height - 1) /
+			mall_alloc_height_blk_aligned = (pipe->plane_res.scl_data.viewport.height - 1 + mblk_height - 1) /
 					mblk_height * mblk_height + mblk_height;
 
 			/* full_mblk_width_ub_l/c = mall_alloc_width_blk_aligned_l/c;
-- 
2.35.1

[PATCH AUTOSEL 6.0 37/39] drm/amd/display: Avoid setting pixel rate divider to N/A

[Sasha Levin]

From: Taimur Hassan <Syed.Hassan@amd.com>

[ Upstream commit 2a5dd86a69ea5435f1a837bdb7fafcda609a7c91 ]

[Why]
Pixel rate divider values should never be set to N/A (0xF) as the K1/K2
field is only 1/2 bits wide.

[How]
Set valid divider values for virtual and FRL/DP2 cases.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c  | 7 +++++++
 drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c | 3 ++-
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c    | 4 +++-
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c   | 1 +
 4 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
index fb729674953b..de9fa534b77a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
@@ -96,6 +96,13 @@ static void dccg314_set_pixel_rate_div(
 	struct dcn_dccg *dccg_dcn = TO_DCN_DCCG(dccg);
 	enum pixel_rate_div cur_k1 = PIXEL_RATE_DIV_NA, cur_k2 = PIXEL_RATE_DIV_NA;
 
+	// Don't program 0xF into the register field. Not valid since
+	// K1 / K2 field is only 1 / 2 bits wide
+	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA) {
+		BREAK_TO_DEBUGGER();
+		return;
+	}
+
 	dccg314_get_pixel_rate_div(dccg, otg_inst, &cur_k1, &cur_k2);
 	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA || (k1 == cur_k1 && k2 == cur_k2))
 		return;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
index f4d1b83979fe..a0741794db62 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
@@ -349,6 +349,7 @@ unsigned int dcn314_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsig
 	odm_combine_factor = get_odm_config(pipe_ctx, NULL);
 
 	if (is_dp_128b_132b_signal(pipe_ctx)) {
+		*k1_div = PIXEL_RATE_DIV_BY_1;
 		*k2_div = PIXEL_RATE_DIV_BY_1;
 	} else if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal) || dc_is_dvi_signal(pipe_ctx->stream->signal)) {
 		*k1_div = PIXEL_RATE_DIV_BY_1;
@@ -356,7 +357,7 @@ unsigned int dcn314_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsig
 			*k2_div = PIXEL_RATE_DIV_BY_2;
 		else
 			*k2_div = PIXEL_RATE_DIV_BY_4;
-	} else if (dc_is_dp_signal(pipe_ctx->stream->signal)) {
+	} else if (dc_is_dp_signal(pipe_ctx->stream->signal) || dc_is_virtual_signal(pipe_ctx->stream->signal)) {
 		if (two_pix_per_container) {
 			*k1_div = PIXEL_RATE_DIV_BY_1;
 			*k2_div = PIXEL_RATE_DIV_BY_2;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
index 6640d0ac4304..6dd8dadd68a5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
@@ -96,8 +96,10 @@ static void dccg32_set_pixel_rate_div(
 
 	// Don't program 0xF into the register field. Not valid since
 	// K1 / K2 field is only 1 / 2 bits wide
-	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA)
+	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA) {
+		BREAK_TO_DEBUGGER();
 		return;
+	}
 
 	dccg32_get_pixel_rate_div(dccg, otg_inst, &cur_k1, &cur_k2);
 	if (k1 == cur_k1 && k2 == cur_k2)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index c72166e096ba..ecdb730f2e96 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -1186,6 +1186,7 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign
 	odm_combine_factor = get_odm_config(pipe_ctx, NULL);
 
 	if (is_dp_128b_132b_signal(pipe_ctx)) {
+		*k1_div = PIXEL_RATE_DIV_BY_1;
 		*k2_div = PIXEL_RATE_DIV_BY_1;
 	} else if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal) || dc_is_dvi_signal(pipe_ctx->stream->signal)) {
 		*k1_div = PIXEL_RATE_DIV_BY_1;
-- 
2.35.1

[PATCH AUTOSEL 6.0 37/39] drm/amd/display: Avoid setting pixel rate divider to N/A

[Sasha Levin]

From: Taimur Hassan <Syed.Hassan@amd.com>

[ Upstream commit 2a5dd86a69ea5435f1a837bdb7fafcda609a7c91 ]

[Why]
Pixel rate divider values should never be set to N/A (0xF) as the K1/K2
field is only 1/2 bits wide.

[How]
Set valid divider values for virtual and FRL/DP2 cases.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c  | 7 +++++++
 drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c | 3 ++-
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c    | 4 +++-
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c   | 1 +
 4 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
index fb729674953b..de9fa534b77a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
@@ -96,6 +96,13 @@ static void dccg314_set_pixel_rate_div(
 	struct dcn_dccg *dccg_dcn = TO_DCN_DCCG(dccg);
 	enum pixel_rate_div cur_k1 = PIXEL_RATE_DIV_NA, cur_k2 = PIXEL_RATE_DIV_NA;
 
+	// Don't program 0xF into the register field. Not valid since
+	// K1 / K2 field is only 1 / 2 bits wide
+	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA) {
+		BREAK_TO_DEBUGGER();
+		return;
+	}
+
 	dccg314_get_pixel_rate_div(dccg, otg_inst, &cur_k1, &cur_k2);
 	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA || (k1 == cur_k1 && k2 == cur_k2))
 		return;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
index f4d1b83979fe..a0741794db62 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
@@ -349,6 +349,7 @@ unsigned int dcn314_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsig
 	odm_combine_factor = get_odm_config(pipe_ctx, NULL);
 
 	if (is_dp_128b_132b_signal(pipe_ctx)) {
+		*k1_div = PIXEL_RATE_DIV_BY_1;
 		*k2_div = PIXEL_RATE_DIV_BY_1;
 	} else if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal) || dc_is_dvi_signal(pipe_ctx->stream->signal)) {
 		*k1_div = PIXEL_RATE_DIV_BY_1;
@@ -356,7 +357,7 @@ unsigned int dcn314_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsig
 			*k2_div = PIXEL_RATE_DIV_BY_2;
 		else
 			*k2_div = PIXEL_RATE_DIV_BY_4;
-	} else if (dc_is_dp_signal(pipe_ctx->stream->signal)) {
+	} else if (dc_is_dp_signal(pipe_ctx->stream->signal) || dc_is_virtual_signal(pipe_ctx->stream->signal)) {
 		if (two_pix_per_container) {
 			*k1_div = PIXEL_RATE_DIV_BY_1;
 			*k2_div = PIXEL_RATE_DIV_BY_2;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
index 6640d0ac4304..6dd8dadd68a5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
@@ -96,8 +96,10 @@ static void dccg32_set_pixel_rate_div(
 
 	// Don't program 0xF into the register field. Not valid since
 	// K1 / K2 field is only 1 / 2 bits wide
-	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA)
+	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA) {
+		BREAK_TO_DEBUGGER();
 		return;
+	}
 
 	dccg32_get_pixel_rate_div(dccg, otg_inst, &cur_k1, &cur_k2);
 	if (k1 == cur_k1 && k2 == cur_k2)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index c72166e096ba..ecdb730f2e96 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -1186,6 +1186,7 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign
 	odm_combine_factor = get_odm_config(pipe_ctx, NULL);
 
 	if (is_dp_128b_132b_signal(pipe_ctx)) {
+		*k1_div = PIXEL_RATE_DIV_BY_1;
 		*k2_div = PIXEL_RATE_DIV_BY_1;
 	} else if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal) || dc_is_dvi_signal(pipe_ctx->stream->signal)) {
 		*k1_div = PIXEL_RATE_DIV_BY_1;
-- 
2.35.1

[PATCH AUTOSEL 6.0 37/39] drm/amd/display: Avoid setting pixel rate divider to N/A

[Sasha Levin]

From: Taimur Hassan <Syed.Hassan@amd.com>

[ Upstream commit 2a5dd86a69ea5435f1a837bdb7fafcda609a7c91 ]

[Why]
Pixel rate divider values should never be set to N/A (0xF) as the K1/K2
field is only 1/2 bits wide.

[How]
Set valid divider values for virtual and FRL/DP2 cases.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c  | 7 +++++++
 drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c | 3 ++-
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c    | 4 +++-
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c   | 1 +
 4 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
index fb729674953b..de9fa534b77a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
@@ -96,6 +96,13 @@ static void dccg314_set_pixel_rate_div(
 	struct dcn_dccg *dccg_dcn = TO_DCN_DCCG(dccg);
 	enum pixel_rate_div cur_k1 = PIXEL_RATE_DIV_NA, cur_k2 = PIXEL_RATE_DIV_NA;
 
+	// Don't program 0xF into the register field. Not valid since
+	// K1 / K2 field is only 1 / 2 bits wide
+	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA) {
+		BREAK_TO_DEBUGGER();
+		return;
+	}
+
 	dccg314_get_pixel_rate_div(dccg, otg_inst, &cur_k1, &cur_k2);
 	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA || (k1 == cur_k1 && k2 == cur_k2))
 		return;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
index f4d1b83979fe..a0741794db62 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
@@ -349,6 +349,7 @@ unsigned int dcn314_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsig
 	odm_combine_factor = get_odm_config(pipe_ctx, NULL);
 
 	if (is_dp_128b_132b_signal(pipe_ctx)) {
+		*k1_div = PIXEL_RATE_DIV_BY_1;
 		*k2_div = PIXEL_RATE_DIV_BY_1;
 	} else if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal) || dc_is_dvi_signal(pipe_ctx->stream->signal)) {
 		*k1_div = PIXEL_RATE_DIV_BY_1;
@@ -356,7 +357,7 @@ unsigned int dcn314_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsig
 			*k2_div = PIXEL_RATE_DIV_BY_2;
 		else
 			*k2_div = PIXEL_RATE_DIV_BY_4;
-	} else if (dc_is_dp_signal(pipe_ctx->stream->signal)) {
+	} else if (dc_is_dp_signal(pipe_ctx->stream->signal) || dc_is_virtual_signal(pipe_ctx->stream->signal)) {
 		if (two_pix_per_container) {
 			*k1_div = PIXEL_RATE_DIV_BY_1;
 			*k2_div = PIXEL_RATE_DIV_BY_2;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
index 6640d0ac4304..6dd8dadd68a5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
@@ -96,8 +96,10 @@ static void dccg32_set_pixel_rate_div(
 
 	// Don't program 0xF into the register field. Not valid since
 	// K1 / K2 field is only 1 / 2 bits wide
-	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA)
+	if (k1 == PIXEL_RATE_DIV_NA || k2 == PIXEL_RATE_DIV_NA) {
+		BREAK_TO_DEBUGGER();
 		return;
+	}
 
 	dccg32_get_pixel_rate_div(dccg, otg_inst, &cur_k1, &cur_k2);
 	if (k1 == cur_k1 && k2 == cur_k2)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index c72166e096ba..ecdb730f2e96 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -1186,6 +1186,7 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign
 	odm_combine_factor = get_odm_config(pipe_ctx, NULL);
 
 	if (is_dp_128b_132b_signal(pipe_ctx)) {
+		*k1_div = PIXEL_RATE_DIV_BY_1;
 		*k2_div = PIXEL_RATE_DIV_BY_1;
 	} else if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal) || dc_is_dvi_signal(pipe_ctx->stream->signal)) {
 		*k1_div = PIXEL_RATE_DIV_BY_1;
-- 
2.35.1

[PATCH AUTOSEL 6.0 38/39] drm/amd/display: Use new num clk levels struct for max mclk index

[Sasha Levin]

From: Dillon Varone <Dillon.Varone@amd.com>

[ Upstream commit e667ee3b0c049bf0c69426879586a2572bb28d26 ]

[WHY?]
When calculating watermark and dlg values, the max mclk level index and
associated speed are needed to find the correlated dummy latency value.
Currently the incorrect index is given due to a clock manager refactor.

[HOW?]
Use num_memclk_level from num_entries_per_clk struct for getting the correct max
mem speed.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index b9d3a4000c3d..221253638b4d 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1797,7 +1797,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
 
 		if (context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][maxMpcComb] ==
 			dm_dram_clock_change_unsupported) {
-			int min_dram_speed_mts_offset = dc->clk_mgr->bw_params->clk_table.num_entries - 1;
+			int min_dram_speed_mts_offset = dc->clk_mgr->bw_params->clk_table.num_entries_per_clk.num_memclk_levels - 1;
 
 			min_dram_speed_mts =
 				dc->clk_mgr->bw_params->clk_table.entries[min_dram_speed_mts_offset].memclk_mhz * 16;
-- 
2.35.1

[PATCH AUTOSEL 6.0 38/39] drm/amd/display: Use new num clk levels struct for max mclk index

[Sasha Levin]

From: Dillon Varone <Dillon.Varone@amd.com>

[ Upstream commit e667ee3b0c049bf0c69426879586a2572bb28d26 ]

[WHY?]
When calculating watermark and dlg values, the max mclk level index and
associated speed are needed to find the correlated dummy latency value.
Currently the incorrect index is given due to a clock manager refactor.

[HOW?]
Use num_memclk_level from num_entries_per_clk struct for getting the correct max
mem speed.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index b9d3a4000c3d..221253638b4d 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1797,7 +1797,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
 
 		if (context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][maxMpcComb] ==
 			dm_dram_clock_change_unsupported) {
-			int min_dram_speed_mts_offset = dc->clk_mgr->bw_params->clk_table.num_entries - 1;
+			int min_dram_speed_mts_offset = dc->clk_mgr->bw_params->clk_table.num_entries_per_clk.num_memclk_levels - 1;
 
 			min_dram_speed_mts =
 				dc->clk_mgr->bw_params->clk_table.entries[min_dram_speed_mts_offset].memclk_mhz * 16;
-- 
2.35.1

[PATCH AUTOSEL 6.0 38/39] drm/amd/display: Use new num clk levels struct for max mclk index

[Sasha Levin]

From: Dillon Varone <Dillon.Varone@amd.com>

[ Upstream commit e667ee3b0c049bf0c69426879586a2572bb28d26 ]

[WHY?]
When calculating watermark and dlg values, the max mclk level index and
associated speed are needed to find the correlated dummy latency value.
Currently the incorrect index is given due to a clock manager refactor.

[HOW?]
Use num_memclk_level from num_entries_per_clk struct for getting the correct max
mem speed.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index b9d3a4000c3d..221253638b4d 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1797,7 +1797,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
 
 		if (context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][maxMpcComb] ==
 			dm_dram_clock_change_unsupported) {
-			int min_dram_speed_mts_offset = dc->clk_mgr->bw_params->clk_table.num_entries - 1;
+			int min_dram_speed_mts_offset = dc->clk_mgr->bw_params->clk_table.num_entries_per_clk.num_memclk_levels - 1;
 
 			min_dram_speed_mts =
 				dc->clk_mgr->bw_params->clk_table.entries[min_dram_speed_mts_offset].memclk_mhz * 16;
-- 
2.35.1

[PATCH AUTOSEL 6.0 39/39] drm/amdgpu: fix use-after-free during gpu recovery

[Sasha Levin]

From: "Stanley.Yang" <Stanley.Yang@amd.com>

[ Upstream commit 3cb93f390453cde4d6afda1587aaa00e75e09617 ]

[Why]
    [  754.862560] refcount_t: underflow; use-after-free.
    [  754.862898] Call Trace:
    [  754.862903]  <TASK>
    [  754.862913]  amdgpu_job_free_cb+0xc2/0xe1 [amdgpu]
    [  754.863543]  drm_sched_main.cold+0x34/0x39 [amd_sched]

[How]
    The fw_fence may be not init, check whether dma_fence_init
    is performed before job free

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
index c2fd6f3076a6..e9583a58cce0 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
@@ -150,7 +150,11 @@ static void amdgpu_job_free_cb(struct drm_sched_job *s_job)
 	amdgpu_sync_free(&job->sync);
 	amdgpu_sync_free(&job->sched_sync);
 
-	dma_fence_put(&job->hw_fence);
+	/* only put the hw fence if has embedded fence */
+	if (!job->hw_fence.ops)
+		kfree(job);
+	else
+		dma_fence_put(&job->hw_fence);
 }
 
 void amdgpu_job_free(struct amdgpu_job *job)
-- 
2.35.1

[PATCH AUTOSEL 6.0 39/39] drm/amdgpu: fix use-after-free during gpu recovery

[Sasha Levin]

From: "Stanley.Yang" <Stanley.Yang@amd.com>

[ Upstream commit 3cb93f390453cde4d6afda1587aaa00e75e09617 ]

[Why]
    [  754.862560] refcount_t: underflow; use-after-free.
    [  754.862898] Call Trace:
    [  754.862903]  <TASK>
    [  754.862913]  amdgpu_job_free_cb+0xc2/0xe1 [amdgpu]
    [  754.863543]  drm_sched_main.cold+0x34/0x39 [amd_sched]

[How]
    The fw_fence may be not init, check whether dma_fence_init
    is performed before job free

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
index c2fd6f3076a6..e9583a58cce0 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
@@ -150,7 +150,11 @@ static void amdgpu_job_free_cb(struct drm_sched_job *s_job)
 	amdgpu_sync_free(&job->sync);
 	amdgpu_sync_free(&job->sched_sync);
 
-	dma_fence_put(&job->hw_fence);
+	/* only put the hw fence if has embedded fence */
+	if (!job->hw_fence.ops)
+		kfree(job);
+	else
+		dma_fence_put(&job->hw_fence);
 }
 
 void amdgpu_job_free(struct amdgpu_job *job)
-- 
2.35.1

[PATCH AUTOSEL 6.0 39/39] drm/amdgpu: fix use-after-free during gpu recovery

[Sasha Levin]

From: "Stanley.Yang" <Stanley.Yang@amd.com>

[ Upstream commit 3cb93f390453cde4d6afda1587aaa00e75e09617 ]

[Why]
    [  754.862560] refcount_t: underflow; use-after-free.
    [  754.862898] Call Trace:
    [  754.862903]  <TASK>
    [  754.862913]  amdgpu_job_free_cb+0xc2/0xe1 [amdgpu]
    [  754.863543]  drm_sched_main.cold+0x34/0x39 [amd_sched]

[How]
    The fw_fence may be not init, check whether dma_fence_init
    is performed before job free

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
index c2fd6f3076a6..e9583a58cce0 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
@@ -150,7 +150,11 @@ static void amdgpu_job_free_cb(struct drm_sched_job *s_job)
 	amdgpu_sync_free(&job->sync);
 	amdgpu_sync_free(&job->sched_sync);
 
-	dma_fence_put(&job->hw_fence);
+	/* only put the hw fence if has embedded fence */
+	if (!job->hw_fence.ops)
+		kfree(job);
+	else
+		dma_fence_put(&job->hw_fence);
 }
 
 void amdgpu_job_free(struct amdgpu_job *job)
-- 
2.35.1