* [PATCH v5 00/10] Implement copy offload support [not found] <CGME20221123061010epcas5p21cef9d23e4362b01f2b19d1117e1cdf5@epcas5p2.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty The patch series covers the points discussed in November 2021 virtual call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. We have covered the initial agreed requirements in this patchset and further additional features suggested by community. Patchset borrows Mikulas's token based approach for 2 bdev implementation. This is on top of our previous patchset v4[1]. Overall series supports: ======================== 1. Driver - NVMe Copy command (single NS, TP 4065), including support in nvme-target (for block and file backend). 2. Block layer - Block-generic copy (REQ_COPY flag), with interface accommodating two block-devs, and multi-source/destination interface - Emulation, when offload is natively absent - dm-linear support (for cases not requiring split) 3. User-interface - new ioctl - copy_file_range for zonefs 4. In-kernel user - dm-kcopyd - copy_file_range in zonefs Testing ======= Copy offload can be tested on: a. QEMU: NVME simple copy (TP 4065). By setting nvme-ns parameters mssrl,mcl, msrc. For more info [2]. b. Fabrics loopback. c. zonefs copy_file_range Emuation can be tested on any device. Sample application to use IOCTL is present in patch desciption. fio[3]. Performance =========== With the async design of copy-emulation/offload using fio[3], we were able to see the following improvements as compared to userspace read and write on a NVMeOF TCP setup: Setup1: Network Speed: 1000Mb/s Host PC: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz Target PC: AMD Ryzen 9 5900X 12-Core Processor block size 8k, range 1: 635% improvement in IO BW (107 MiB/s to 787 MiB/s). Network utilisation drops from 97% to 14%. block-size 2M, range 16: 2555% improvement in IO BW (100 MiB/s to 2655 MiB/s). Network utilisation drops from 89% to 0.62%. Setup2: Network Speed: 100Gb/s Server: Intel(R) Xeon(R) Gold 6240 CPU @ 2.60GHz, 72 cores (host and target have the same configuration) block-size 8k, range 1: 6.5% improvement in IO BW (791 MiB/s to 843 MiB/s). Network utilisation drops from 6.75% to 0.14%. block-size 2M, range 16: 15% improvement in IO BW (1027 MiB/s to 1183 MiB/s). Network utilisation drops from 8.42% to ~0%. block-size 8k, 8 ranges: 18% drop in IO BW (from 798 MiB/s to 647 MiB/s) Network utilisation drops from 6.66% to 0.13%. At present we see drop in performance for bs 8k,16k and higher ranges (8, 16), so something more to check there. Overall, in these tests, kernel copy emulation performs better than userspace read+write. Zonefs copy_file_range ====================== Sample tests for zonefs-tools[4]. Test 0118 and 0119 will test basic CFR. Will raise a PR, once this series is finalized. Future Work =========== - nullblk: copy-offload emulation - generic copy file range (CFR): I did go through this, but couldn't find straight forward way to plug in copy offload for all the cases. We are doing detailed study, will address this future versions. - loopback device copy offload support - upstream fio to use copy offload These are to be taken up after we reach consensus on the plumbing of current elements that are part of this series. Additional links: ================= [0] https://lore.kernel.org/linux-nvme/CA+1E3rJ7BZ7LjQXXTdX+-0Edz=zT14mmPGMiVCzUgB33C60tbQ@mail.gmail.com/ [1] https://lore.kernel.org/lkml/20220426101241.30100-1-nj.shetty@samsung.com/ [2] https://qemu-project.gitlab.io/qemu/system/devices/nvme.html#simple-copy [3] https://github.com/vincentkfu/fio/tree/copyoffload [4] https://github.com/nitesh-shetty/zonefs-tools/tree/cfr Changes since v4: ================= - make the offload and emulation design asynchronous (Hannes Reinecke) - fabrics loopback support - sysfs naming improvements (Damien Le Moal) - use kfree() instead of kvfree() in cio_await_completion (Damien Le Moal) - use ranges instead of rlist to represent range_entry (Damien Le Moal) - change argument ordering in blk_copy_offload suggested (Damien Le Moal) - removed multiple copy limit and merged into only one limit (Damien Le Moal) - wrap overly long lines (Damien Le Moal) - other naming improvements and cleanups (Damien Le Moal) - correctly format the code example in description (Damien Le Moal) - mark blk_copy_offload as static (kernel test robot) Changes since v3: ================= - added copy_file_range support for zonefs - added documentation about new sysfs entries - incorporated review comments on v3 - minor fixes Changes since v2: ================= - fixed possible race condition reported by Damien Le Moal - new sysfs controls as suggested by Damien Le Moal - fixed possible memory leak reported by Dan Carpenter, lkp - minor fixes Nitesh Shetty (10): block: Introduce queue limits for copy-offload support block: Add copy offload support infrastructure block: add emulation for copy block: Introduce a new ioctl for copy nvme: add copy offload support nvmet: add copy command support for bdev and file ns dm: Add support for copy offload. dm: Enable copy offload for dm-linear target dm kcopyd: use copy offload support fs: add support for copy file range in zonefs Documentation/ABI/stable/sysfs-block | 36 ++ block/blk-lib.c | 597 +++++++++++++++++++++++++++ block/blk-map.c | 4 +- block/blk-settings.c | 24 ++ block/blk-sysfs.c | 64 +++ block/blk.h | 2 + block/ioctl.c | 36 ++ drivers/md/dm-kcopyd.c | 56 ++- drivers/md/dm-linear.c | 1 + drivers/md/dm-table.c | 42 ++ drivers/md/dm.c | 7 + drivers/nvme/host/core.c | 106 ++++- drivers/nvme/host/fc.c | 5 + drivers/nvme/host/nvme.h | 7 + drivers/nvme/host/pci.c | 28 +- drivers/nvme/host/rdma.c | 7 + drivers/nvme/host/tcp.c | 16 + drivers/nvme/host/trace.c | 19 + drivers/nvme/target/admin-cmd.c | 9 +- drivers/nvme/target/io-cmd-bdev.c | 79 ++++ drivers/nvme/target/io-cmd-file.c | 51 +++ drivers/nvme/target/loop.c | 6 + drivers/nvme/target/nvmet.h | 2 + fs/zonefs/super.c | 179 ++++++++ include/linux/blk_types.h | 44 ++ include/linux/blkdev.h | 18 + include/linux/device-mapper.h | 5 + include/linux/nvme.h | 43 +- include/uapi/linux/fs.h | 27 ++ 29 files changed, 1502 insertions(+), 18 deletions(-) base-commit: e4cd8d3ff7f9efeb97330e5e9b99eeb2a68f5cf9 -- 2.35.1.500.gb896f729e2 ^ permalink raw reply [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 00/10] Implement copy offload support @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, nitheshshetty The patch series covers the points discussed in November 2021 virtual call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. We have covered the initial agreed requirements in this patchset and further additional features suggested by community. Patchset borrows Mikulas's token based approach for 2 bdev implementation. This is on top of our previous patchset v4[1]. Overall series supports: ======================== 1. Driver - NVMe Copy command (single NS, TP 4065), including support in nvme-target (for block and file backend). 2. Block layer - Block-generic copy (REQ_COPY flag), with interface accommodating two block-devs, and multi-source/destination interface - Emulation, when offload is natively absent - dm-linear support (for cases not requiring split) 3. User-interface - new ioctl - copy_file_range for zonefs 4. In-kernel user - dm-kcopyd - copy_file_range in zonefs Testing ======= Copy offload can be tested on: a. QEMU: NVME simple copy (TP 4065). By setting nvme-ns parameters mssrl,mcl, msrc. For more info [2]. b. Fabrics loopback. c. zonefs copy_file_range Emuation can be tested on any device. Sample application to use IOCTL is present in patch desciption. fio[3]. Performance =========== With the async design of copy-emulation/offload using fio[3], we were able to see the following improvements as compared to userspace read and write on a NVMeOF TCP setup: Setup1: Network Speed: 1000Mb/s Host PC: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz Target PC: AMD Ryzen 9 5900X 12-Core Processor block size 8k, range 1: 635% improvement in IO BW (107 MiB/s to 787 MiB/s). Network utilisation drops from 97% to 14%. block-size 2M, range 16: 2555% improvement in IO BW (100 MiB/s to 2655 MiB/s). Network utilisation drops from 89% to 0.62%. Setup2: Network Speed: 100Gb/s Server: Intel(R) Xeon(R) Gold 6240 CPU @ 2.60GHz, 72 cores (host and target have the same configuration) block-size 8k, range 1: 6.5% improvement in IO BW (791 MiB/s to 843 MiB/s). Network utilisation drops from 6.75% to 0.14%. block-size 2M, range 16: 15% improvement in IO BW (1027 MiB/s to 1183 MiB/s). Network utilisation drops from 8.42% to ~0%. block-size 8k, 8 ranges: 18% drop in IO BW (from 798 MiB/s to 647 MiB/s) Network utilisation drops from 6.66% to 0.13%. At present we see drop in performance for bs 8k,16k and higher ranges (8, 16), so something more to check there. Overall, in these tests, kernel copy emulation performs better than userspace read+write. Zonefs copy_file_range ====================== Sample tests for zonefs-tools[4]. Test 0118 and 0119 will test basic CFR. Will raise a PR, once this series is finalized. Future Work =========== - nullblk: copy-offload emulation - generic copy file range (CFR): I did go through this, but couldn't find straight forward way to plug in copy offload for all the cases. We are doing detailed study, will address this future versions. - loopback device copy offload support - upstream fio to use copy offload These are to be taken up after we reach consensus on the plumbing of current elements that are part of this series. Additional links: ================= [0] https://lore.kernel.org/linux-nvme/CA+1E3rJ7BZ7LjQXXTdX+-0Edz=zT14mmPGMiVCzUgB33C60tbQ@mail.gmail.com/ [1] https://lore.kernel.org/lkml/20220426101241.30100-1-nj.shetty@samsung.com/ [2] https://qemu-project.gitlab.io/qemu/system/devices/nvme.html#simple-copy [3] https://github.com/vincentkfu/fio/tree/copyoffload [4] https://github.com/nitesh-shetty/zonefs-tools/tree/cfr Changes since v4: ================= - make the offload and emulation design asynchronous (Hannes Reinecke) - fabrics loopback support - sysfs naming improvements (Damien Le Moal) - use kfree() instead of kvfree() in cio_await_completion (Damien Le Moal) - use ranges instead of rlist to represent range_entry (Damien Le Moal) - change argument ordering in blk_copy_offload suggested (Damien Le Moal) - removed multiple copy limit and merged into only one limit (Damien Le Moal) - wrap overly long lines (Damien Le Moal) - other naming improvements and cleanups (Damien Le Moal) - correctly format the code example in description (Damien Le Moal) - mark blk_copy_offload as static (kernel test robot) Changes since v3: ================= - added copy_file_range support for zonefs - added documentation about new sysfs entries - incorporated review comments on v3 - minor fixes Changes since v2: ================= - fixed possible race condition reported by Damien Le Moal - new sysfs controls as suggested by Damien Le Moal - fixed possible memory leak reported by Dan Carpenter, lkp - minor fixes Nitesh Shetty (10): block: Introduce queue limits for copy-offload support block: Add copy offload support infrastructure block: add emulation for copy block: Introduce a new ioctl for copy nvme: add copy offload support nvmet: add copy command support for bdev and file ns dm: Add support for copy offload. dm: Enable copy offload for dm-linear target dm kcopyd: use copy offload support fs: add support for copy file range in zonefs Documentation/ABI/stable/sysfs-block | 36 ++ block/blk-lib.c | 597 +++++++++++++++++++++++++++ block/blk-map.c | 4 +- block/blk-settings.c | 24 ++ block/blk-sysfs.c | 64 +++ block/blk.h | 2 + block/ioctl.c | 36 ++ drivers/md/dm-kcopyd.c | 56 ++- drivers/md/dm-linear.c | 1 + drivers/md/dm-table.c | 42 ++ drivers/md/dm.c | 7 + drivers/nvme/host/core.c | 106 ++++- drivers/nvme/host/fc.c | 5 + drivers/nvme/host/nvme.h | 7 + drivers/nvme/host/pci.c | 28 +- drivers/nvme/host/rdma.c | 7 + drivers/nvme/host/tcp.c | 16 + drivers/nvme/host/trace.c | 19 + drivers/nvme/target/admin-cmd.c | 9 +- drivers/nvme/target/io-cmd-bdev.c | 79 ++++ drivers/nvme/target/io-cmd-file.c | 51 +++ drivers/nvme/target/loop.c | 6 + drivers/nvme/target/nvmet.h | 2 + fs/zonefs/super.c | 179 ++++++++ include/linux/blk_types.h | 44 ++ include/linux/blkdev.h | 18 + include/linux/device-mapper.h | 5 + include/linux/nvme.h | 43 +- include/uapi/linux/fs.h | 27 ++ 29 files changed, 1502 insertions(+), 18 deletions(-) base-commit: e4cd8d3ff7f9efeb97330e5e9b99eeb2a68f5cf9 -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061014epcas5p150fd8add12fe6d09b63c56972818e6a2@epcas5p1.samsung.com>]
* [PATCH v5 01/10] block: Introduce queue limits for copy-offload support [not found] ` <CGME20221123061014epcas5p150fd8add12fe6d09b63c56972818e6a2@epcas5p1.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty, Hannes Reinecke Add device limits as sysfs entries, - copy_offload (RW) - copy_max_bytes (RW) - copy_max_bytes_hw (RO) Above limits help to split the copy payload in block layer. copy_offload: used for setting copy offload(1) or emulation(0). copy_max_bytes: maximum total length of copy in single payload. copy_max_bytes_hw: Reflects the device supported maximum limit. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- Documentation/ABI/stable/sysfs-block | 36 ++++++++++++++++ block/blk-settings.c | 24 +++++++++++ block/blk-sysfs.c | 64 ++++++++++++++++++++++++++++ include/linux/blkdev.h | 12 ++++++ include/uapi/linux/fs.h | 3 ++ 5 files changed, 139 insertions(+) diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index cd14ecb3c9a5..e0c9be009706 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -155,6 +155,42 @@ Description: last zone of the device which may be smaller. +What: /sys/block/<disk>/queue/copy_offload +Date: November 2022 +Contact: linux-block@vger.kernel.org +Description: + [RW] When read, this file shows whether offloading copy to + device is enabled (1) or disabled (0). Writing '0' to this + file will disable offloading copies for this device. + Writing any '1' value will enable this feature. If device + does not support offloading, then writing 1, will result in + error. + + +What: /sys/block/<disk>/queue/copy_max_bytes +Date: November 2022 +Contact: linux-block@vger.kernel.org +Description: + [RW] While 'copy_max_bytes_hw' is the hardware limit for the + device, 'copy_max_bytes' setting is the software limit. + Setting this value lower will make Linux issue smaller size + copies from block layer. + + +What: /sys/block/<disk>/queue/copy_max_bytes_hw +Date: November 2022 +Contact: linux-block@vger.kernel.org +Description: + [RO] Devices that support offloading copy functionality may have + internal limits on the number of bytes that can be offloaded + in a single operation. The `copy_max_bytes_hw` + parameter is set by the device driver to the maximum number of + bytes that can be copied in a single operation. Copy + requests issued to the device must not exceed this limit. + A value of 0 means that the device does not + support copy offload. + + What: /sys/block/<disk>/queue/crypto/ Date: February 2022 Contact: linux-block@vger.kernel.org diff --git a/block/blk-settings.c b/block/blk-settings.c index 0477c4d527fe..ca6f15a70fdc 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -58,6 +58,8 @@ void blk_set_default_limits(struct queue_limits *lim) lim->zoned = BLK_ZONED_NONE; lim->zone_write_granularity = 0; lim->dma_alignment = 511; + lim->max_copy_sectors_hw = 0; + lim->max_copy_sectors = 0; } /** @@ -81,6 +83,8 @@ void blk_set_stacking_limits(struct queue_limits *lim) lim->max_dev_sectors = UINT_MAX; lim->max_write_zeroes_sectors = UINT_MAX; lim->max_zone_append_sectors = UINT_MAX; + lim->max_copy_sectors_hw = ULONG_MAX; + lim->max_copy_sectors = ULONG_MAX; } EXPORT_SYMBOL(blk_set_stacking_limits); @@ -177,6 +181,22 @@ void blk_queue_max_discard_sectors(struct request_queue *q, } EXPORT_SYMBOL(blk_queue_max_discard_sectors); +/** + * blk_queue_max_copy_sectors_hw - set max sectors for a single copy payload + * @q: the request queue for the device + * @max_copy_sectors: maximum number of sectors to copy + **/ +void blk_queue_max_copy_sectors_hw(struct request_queue *q, + unsigned int max_copy_sectors) +{ + if (max_copy_sectors >= MAX_COPY_TOTAL_LENGTH) + max_copy_sectors = MAX_COPY_TOTAL_LENGTH; + + q->limits.max_copy_sectors_hw = max_copy_sectors; + q->limits.max_copy_sectors = max_copy_sectors; +} +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors_hw); + /** * blk_queue_max_secure_erase_sectors - set max sectors for a secure erase * @q: the request queue for the device @@ -572,6 +592,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); + t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors); + t->max_copy_sectors_hw = min(t->max_copy_sectors_hw, + b->max_copy_sectors_hw); + t->misaligned |= b->misaligned; alignment = queue_limit_alignment_offset(b, start); diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 02e94c4beff1..903285b04029 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -212,6 +212,63 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag return queue_var_show(0, page); } +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page) +{ + return queue_var_show(blk_queue_copy(q), page); +} + +static ssize_t queue_copy_offload_store(struct request_queue *q, + const char *page, size_t count) +{ + s64 copy_offload; + ssize_t ret = queue_var_store64(©_offload, page); + + if (ret < 0) + return ret; + + if (copy_offload && !q->limits.max_copy_sectors_hw) + return -EINVAL; + + if (copy_offload) + blk_queue_flag_set(QUEUE_FLAG_COPY, q); + else + blk_queue_flag_clear(QUEUE_FLAG_COPY, q); + + return count; +} + +static ssize_t queue_copy_max_hw_show(struct request_queue *q, char *page) +{ + return sprintf(page, "%llu\n", (unsigned long long) + q->limits.max_copy_sectors_hw << SECTOR_SHIFT); +} + +static ssize_t queue_copy_max_show(struct request_queue *q, char *page) +{ + return sprintf(page, "%llu\n", (unsigned long long) + q->limits.max_copy_sectors << SECTOR_SHIFT); +} + +static ssize_t queue_copy_max_store(struct request_queue *q, + const char *page, size_t count) +{ + s64 max_copy; + ssize_t ret = queue_var_store64(&max_copy, page); + + if (ret < 0) + return ret; + + if (max_copy & (queue_logical_block_size(q) - 1)) + return -EINVAL; + + max_copy >>= SECTOR_SHIFT; + if (max_copy > q->limits.max_copy_sectors_hw) + max_copy = q->limits.max_copy_sectors_hw; + + q->limits.max_copy_sectors = max_copy; + return count; +} + static ssize_t queue_write_same_max_show(struct request_queue *q, char *page) { return queue_var_show(0, page); @@ -604,6 +661,10 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones"); QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones"); QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones"); +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload"); +QUEUE_RO_ENTRY(queue_copy_max_hw, "copy_max_bytes_hw"); +QUEUE_RW_ENTRY(queue_copy_max, "copy_max_bytes"); + QUEUE_RW_ENTRY(queue_nomerges, "nomerges"); QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity"); QUEUE_RW_ENTRY(queue_poll, "io_poll"); @@ -651,6 +712,9 @@ static struct attribute *queue_attrs[] = { &queue_discard_max_entry.attr, &queue_discard_max_hw_entry.attr, &queue_discard_zeroes_data_entry.attr, + &queue_copy_offload_entry.attr, + &queue_copy_max_hw_entry.attr, + &queue_copy_max_entry.attr, &queue_write_same_max_entry.attr, &queue_write_zeroes_max_entry.attr, &queue_zone_append_max_entry.attr, diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a0452ba08e9a..3ac324208f2f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -302,6 +302,9 @@ struct queue_limits { unsigned int discard_alignment; unsigned int zone_write_granularity; + unsigned long max_copy_sectors_hw; + unsigned long max_copy_sectors; + unsigned short max_segments; unsigned short max_integrity_segments; unsigned short max_discard_segments; @@ -573,6 +576,7 @@ struct request_queue { #define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */ #define QUEUE_FLAG_SQ_SCHED 30 /* single queue style io dispatch */ #define QUEUE_FLAG_SKIP_TAGSET_QUIESCE 31 /* quiesce_tagset skip the queue*/ +#define QUEUE_FLAG_COPY 32 /* supports copy offload */ #define QUEUE_FLAG_MQ_DEFAULT ((1UL << QUEUE_FLAG_IO_STAT) | \ (1UL << QUEUE_FLAG_SAME_COMP) | \ @@ -593,6 +597,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) +#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags) #define blk_queue_zone_resetall(q) \ test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags) #define blk_queue_dax(q) test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags) @@ -913,6 +918,8 @@ extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int); extern void blk_queue_max_segments(struct request_queue *, unsigned short); extern void blk_queue_max_discard_segments(struct request_queue *, unsigned short); +extern void blk_queue_max_copy_sectors_hw(struct request_queue *q, + unsigned int max_copy_sectors); void blk_queue_max_secure_erase_sectors(struct request_queue *q, unsigned int max_sectors); extern void blk_queue_max_segment_size(struct request_queue *, unsigned int); @@ -1231,6 +1238,11 @@ static inline unsigned int bdev_discard_granularity(struct block_device *bdev) return bdev_get_queue(bdev)->limits.discard_granularity; } +static inline unsigned int bdev_max_copy_sectors(struct block_device *bdev) +{ + return bdev_get_queue(bdev)->limits.max_copy_sectors; +} + static inline unsigned int bdev_max_secure_erase_sectors(struct block_device *bdev) { diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index b7b56871029c..b3ad173f619c 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -64,6 +64,9 @@ struct fstrim_range { __u64 minlen; }; +/* maximum total copy length */ +#define MAX_COPY_TOTAL_LENGTH (1 << 27) + /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */ #define FILE_DEDUPE_RANGE_SAME 0 #define FILE_DEDUPE_RANGE_DIFFERS 1 -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 01/10] block: Introduce queue limits for copy-offload support @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, nitheshshetty Add device limits as sysfs entries, - copy_offload (RW) - copy_max_bytes (RW) - copy_max_bytes_hw (RO) Above limits help to split the copy payload in block layer. copy_offload: used for setting copy offload(1) or emulation(0). copy_max_bytes: maximum total length of copy in single payload. copy_max_bytes_hw: Reflects the device supported maximum limit. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- Documentation/ABI/stable/sysfs-block | 36 ++++++++++++++++ block/blk-settings.c | 24 +++++++++++ block/blk-sysfs.c | 64 ++++++++++++++++++++++++++++ include/linux/blkdev.h | 12 ++++++ include/uapi/linux/fs.h | 3 ++ 5 files changed, 139 insertions(+) diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index cd14ecb3c9a5..e0c9be009706 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -155,6 +155,42 @@ Description: last zone of the device which may be smaller. +What: /sys/block/<disk>/queue/copy_offload +Date: November 2022 +Contact: linux-block@vger.kernel.org +Description: + [RW] When read, this file shows whether offloading copy to + device is enabled (1) or disabled (0). Writing '0' to this + file will disable offloading copies for this device. + Writing any '1' value will enable this feature. If device + does not support offloading, then writing 1, will result in + error. + + +What: /sys/block/<disk>/queue/copy_max_bytes +Date: November 2022 +Contact: linux-block@vger.kernel.org +Description: + [RW] While 'copy_max_bytes_hw' is the hardware limit for the + device, 'copy_max_bytes' setting is the software limit. + Setting this value lower will make Linux issue smaller size + copies from block layer. + + +What: /sys/block/<disk>/queue/copy_max_bytes_hw +Date: November 2022 +Contact: linux-block@vger.kernel.org +Description: + [RO] Devices that support offloading copy functionality may have + internal limits on the number of bytes that can be offloaded + in a single operation. The `copy_max_bytes_hw` + parameter is set by the device driver to the maximum number of + bytes that can be copied in a single operation. Copy + requests issued to the device must not exceed this limit. + A value of 0 means that the device does not + support copy offload. + + What: /sys/block/<disk>/queue/crypto/ Date: February 2022 Contact: linux-block@vger.kernel.org diff --git a/block/blk-settings.c b/block/blk-settings.c index 0477c4d527fe..ca6f15a70fdc 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -58,6 +58,8 @@ void blk_set_default_limits(struct queue_limits *lim) lim->zoned = BLK_ZONED_NONE; lim->zone_write_granularity = 0; lim->dma_alignment = 511; + lim->max_copy_sectors_hw = 0; + lim->max_copy_sectors = 0; } /** @@ -81,6 +83,8 @@ void blk_set_stacking_limits(struct queue_limits *lim) lim->max_dev_sectors = UINT_MAX; lim->max_write_zeroes_sectors = UINT_MAX; lim->max_zone_append_sectors = UINT_MAX; + lim->max_copy_sectors_hw = ULONG_MAX; + lim->max_copy_sectors = ULONG_MAX; } EXPORT_SYMBOL(blk_set_stacking_limits); @@ -177,6 +181,22 @@ void blk_queue_max_discard_sectors(struct request_queue *q, } EXPORT_SYMBOL(blk_queue_max_discard_sectors); +/** + * blk_queue_max_copy_sectors_hw - set max sectors for a single copy payload + * @q: the request queue for the device + * @max_copy_sectors: maximum number of sectors to copy + **/ +void blk_queue_max_copy_sectors_hw(struct request_queue *q, + unsigned int max_copy_sectors) +{ + if (max_copy_sectors >= MAX_COPY_TOTAL_LENGTH) + max_copy_sectors = MAX_COPY_TOTAL_LENGTH; + + q->limits.max_copy_sectors_hw = max_copy_sectors; + q->limits.max_copy_sectors = max_copy_sectors; +} +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors_hw); + /** * blk_queue_max_secure_erase_sectors - set max sectors for a secure erase * @q: the request queue for the device @@ -572,6 +592,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); + t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors); + t->max_copy_sectors_hw = min(t->max_copy_sectors_hw, + b->max_copy_sectors_hw); + t->misaligned |= b->misaligned; alignment = queue_limit_alignment_offset(b, start); diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 02e94c4beff1..903285b04029 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -212,6 +212,63 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag return queue_var_show(0, page); } +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page) +{ + return queue_var_show(blk_queue_copy(q), page); +} + +static ssize_t queue_copy_offload_store(struct request_queue *q, + const char *page, size_t count) +{ + s64 copy_offload; + ssize_t ret = queue_var_store64(©_offload, page); + + if (ret < 0) + return ret; + + if (copy_offload && !q->limits.max_copy_sectors_hw) + return -EINVAL; + + if (copy_offload) + blk_queue_flag_set(QUEUE_FLAG_COPY, q); + else + blk_queue_flag_clear(QUEUE_FLAG_COPY, q); + + return count; +} + +static ssize_t queue_copy_max_hw_show(struct request_queue *q, char *page) +{ + return sprintf(page, "%llu\n", (unsigned long long) + q->limits.max_copy_sectors_hw << SECTOR_SHIFT); +} + +static ssize_t queue_copy_max_show(struct request_queue *q, char *page) +{ + return sprintf(page, "%llu\n", (unsigned long long) + q->limits.max_copy_sectors << SECTOR_SHIFT); +} + +static ssize_t queue_copy_max_store(struct request_queue *q, + const char *page, size_t count) +{ + s64 max_copy; + ssize_t ret = queue_var_store64(&max_copy, page); + + if (ret < 0) + return ret; + + if (max_copy & (queue_logical_block_size(q) - 1)) + return -EINVAL; + + max_copy >>= SECTOR_SHIFT; + if (max_copy > q->limits.max_copy_sectors_hw) + max_copy = q->limits.max_copy_sectors_hw; + + q->limits.max_copy_sectors = max_copy; + return count; +} + static ssize_t queue_write_same_max_show(struct request_queue *q, char *page) { return queue_var_show(0, page); @@ -604,6 +661,10 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones"); QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones"); QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones"); +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload"); +QUEUE_RO_ENTRY(queue_copy_max_hw, "copy_max_bytes_hw"); +QUEUE_RW_ENTRY(queue_copy_max, "copy_max_bytes"); + QUEUE_RW_ENTRY(queue_nomerges, "nomerges"); QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity"); QUEUE_RW_ENTRY(queue_poll, "io_poll"); @@ -651,6 +712,9 @@ static struct attribute *queue_attrs[] = { &queue_discard_max_entry.attr, &queue_discard_max_hw_entry.attr, &queue_discard_zeroes_data_entry.attr, + &queue_copy_offload_entry.attr, + &queue_copy_max_hw_entry.attr, + &queue_copy_max_entry.attr, &queue_write_same_max_entry.attr, &queue_write_zeroes_max_entry.attr, &queue_zone_append_max_entry.attr, diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a0452ba08e9a..3ac324208f2f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -302,6 +302,9 @@ struct queue_limits { unsigned int discard_alignment; unsigned int zone_write_granularity; + unsigned long max_copy_sectors_hw; + unsigned long max_copy_sectors; + unsigned short max_segments; unsigned short max_integrity_segments; unsigned short max_discard_segments; @@ -573,6 +576,7 @@ struct request_queue { #define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */ #define QUEUE_FLAG_SQ_SCHED 30 /* single queue style io dispatch */ #define QUEUE_FLAG_SKIP_TAGSET_QUIESCE 31 /* quiesce_tagset skip the queue*/ +#define QUEUE_FLAG_COPY 32 /* supports copy offload */ #define QUEUE_FLAG_MQ_DEFAULT ((1UL << QUEUE_FLAG_IO_STAT) | \ (1UL << QUEUE_FLAG_SAME_COMP) | \ @@ -593,6 +597,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) +#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags) #define blk_queue_zone_resetall(q) \ test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags) #define blk_queue_dax(q) test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags) @@ -913,6 +918,8 @@ extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int); extern void blk_queue_max_segments(struct request_queue *, unsigned short); extern void blk_queue_max_discard_segments(struct request_queue *, unsigned short); +extern void blk_queue_max_copy_sectors_hw(struct request_queue *q, + unsigned int max_copy_sectors); void blk_queue_max_secure_erase_sectors(struct request_queue *q, unsigned int max_sectors); extern void blk_queue_max_segment_size(struct request_queue *, unsigned int); @@ -1231,6 +1238,11 @@ static inline unsigned int bdev_discard_granularity(struct block_device *bdev) return bdev_get_queue(bdev)->limits.discard_granularity; } +static inline unsigned int bdev_max_copy_sectors(struct block_device *bdev) +{ + return bdev_get_queue(bdev)->limits.max_copy_sectors; +} + static inline unsigned int bdev_max_secure_erase_sectors(struct block_device *bdev) { diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index b7b56871029c..b3ad173f619c 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -64,6 +64,9 @@ struct fstrim_range { __u64 minlen; }; +/* maximum total copy length */ +#define MAX_COPY_TOTAL_LENGTH (1 << 27) + /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */ #define FILE_DEDUPE_RANGE_SAME 0 #define FILE_DEDUPE_RANGE_DIFFERS 1 -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061017epcas5p246a589e20eac655ac340cfda6028ff35@epcas5p2.samsung.com>]
* [PATCH v5 02/10] block: Add copy offload support infrastructure [not found] ` <CGME20221123061017epcas5p246a589e20eac655ac340cfda6028ff35@epcas5p2.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty Introduce blkdev_issue_copy which supports source and destination bdevs, and an array of (source, destination and copy length) tuples. Introduce REQ_COPY copy offload operation flag. Create a read-write bio pair with a token as payload and submitted to the device in order. Read request populates token with source specific information which is then passed with write request. This design is courtesy Mikulas Patocka's token based copy Larger copy will be divided, based on max_copy_sectors limit. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- block/blk-lib.c | 358 ++++++++++++++++++++++++++++++++++++++ block/blk.h | 2 + include/linux/blk_types.h | 44 +++++ include/linux/blkdev.h | 3 + include/uapi/linux/fs.h | 15 ++ 5 files changed, 422 insertions(+) diff --git a/block/blk-lib.c b/block/blk-lib.c index e59c3069e835..2ce3c872ca49 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -115,6 +115,364 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, } EXPORT_SYMBOL(blkdev_issue_discard); +/* + * For synchronous copy offload/emulation, wait and process all in-flight BIOs. + * This must only be called once all bios have been issued so that the refcount + * can only decrease. This just waits for all bios to make it through + * bio_copy_*_write_end_io. IO errors are propagated through cio->io_error. + */ +static int cio_await_completion(struct cio *cio) +{ + int ret = 0; + + atomic_dec(&cio->refcount); + + if (cio->endio) + return 0; + + if (atomic_read(&cio->refcount)) { + __set_current_state(TASK_UNINTERRUPTIBLE); + blk_io_schedule(); + } + + ret = cio->io_err; + kfree(cio); + + return ret; +} + +static void blk_copy_offload_write_end_io(struct bio *bio) +{ + struct copy_ctx *ctx = bio->bi_private; + struct cio *cio = ctx->cio; + sector_t clen; + int ri = ctx->range_idx; + + if (bio->bi_status) { + cio->io_err = blk_status_to_errno(bio->bi_status); + clen = (bio->bi_iter.bi_sector << SECTOR_SHIFT) - + cio->ranges[ri].dst; + cio->ranges[ri].comp_len = min_t(sector_t, clen, + cio->ranges[ri].comp_len); + } + __free_page(bio->bi_io_vec[0].bv_page); + bio_put(bio); + + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + if (atomic_dec_and_test(&cio->refcount)) { + if (cio->endio) { + cio->endio(cio->private, cio->io_err); + kfree(cio); + } else + blk_wake_io_task(cio->waiter); + } +} + +static void blk_copy_offload_read_end_io(struct bio *read_bio) +{ + struct copy_ctx *ctx = read_bio->bi_private; + struct cio *cio = ctx->cio; + sector_t clen; + int ri = ctx->range_idx; + unsigned long flags; + + if (read_bio->bi_status) { + cio->io_err = blk_status_to_errno(read_bio->bi_status); + goto err_rw_bio; + } + + /* For zoned device, we check if completed bio is first entry in linked + * list, + * if yes, we start the worker to submit write bios. + * if not, then we just update status of bio in ctx, + * once the worker gets scheduled, it will submit writes for all + * the consecutive REQ_COPY_READ_COMPLETE bios. + */ + if (bdev_is_zoned(ctx->write_bio->bi_bdev)) { + spin_lock_irqsave(&cio->list_lock, flags); + ctx->status = REQ_COPY_READ_COMPLETE; + if (ctx == list_first_entry(&cio->list, + struct copy_ctx, list)) { + spin_unlock_irqrestore(&cio->list_lock, flags); + schedule_work(&ctx->dispatch_work); + goto free_read_bio; + } + spin_unlock_irqrestore(&cio->list_lock, flags); + } else + schedule_work(&ctx->dispatch_work); + +free_read_bio: + bio_put(read_bio); + + return; + +err_rw_bio: + clen = (read_bio->bi_iter.bi_sector << SECTOR_SHIFT) - + cio->ranges[ri].src; + cio->ranges[ri].comp_len = min_t(sector_t, clen, + cio->ranges[ri].comp_len); + __free_page(read_bio->bi_io_vec[0].bv_page); + bio_put(ctx->write_bio); + bio_put(read_bio); + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + if (atomic_dec_and_test(&cio->refcount)) { + if (cio->endio) { + cio->endio(cio->private, cio->io_err); + kfree(cio); + } else + blk_wake_io_task(cio->waiter); + } +} + +static void blk_copy_dispatch_work_fn(struct work_struct *work) +{ + struct copy_ctx *ctx = container_of(work, struct copy_ctx, + dispatch_work); + + submit_bio(ctx->write_bio); +} + +static void blk_zoned_copy_dispatch_work_fn(struct work_struct *work) +{ + struct copy_ctx *ctx = container_of(work, struct copy_ctx, + dispatch_work); + struct cio *cio = ctx->cio; + unsigned long flags = 0; + + atomic_inc(&cio->refcount); + spin_lock_irqsave(&cio->list_lock, flags); + + while (!list_empty(&cio->list)) { + ctx = list_first_entry(&cio->list, struct copy_ctx, list); + + if (ctx->status == REQ_COPY_READ_PROGRESS) + break; + + atomic_inc(&ctx->refcount); + ctx->status = REQ_COPY_WRITE_PROGRESS; + spin_unlock_irqrestore(&cio->list_lock, flags); + submit_bio(ctx->write_bio); + spin_lock_irqsave(&cio->list_lock, flags); + + list_del(&ctx->list); + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + } + + spin_unlock_irqrestore(&cio->list_lock, flags); + if (atomic_dec_and_test(&cio->refcount)) + blk_wake_io_task(cio->waiter); +} + +/* + * blk_copy_offload - Use device's native copy offload feature. + * we perform copy operation by sending 2 bio. + * 1. First we send a read bio with REQ_COPY flag along with a token and source + * and length. Once read bio reaches driver layer, device driver adds all the + * source info to token and does a fake completion. + * 2. Once read opration completes, we issue write with REQ_COPY flag with same + * token. In driver layer, token info is used to form a copy offload command. + * + * For conventional devices we submit write bio independentenly once read + * completes. For zoned devices , reads can complete out of order, so we + * maintain a linked list and submit writes in the order, reads are submitted. + */ +static int blk_copy_offload(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, + int nr, cio_iodone_t end_io, void *private, gfp_t gfp_mask) +{ + struct cio *cio; + struct copy_ctx *ctx; + struct bio *read_bio, *write_bio; + struct page *token; + sector_t src_blk, copy_len, dst_blk; + sector_t rem, max_copy_len; + int ri = 0, ret = 0; + unsigned long flags; + + cio = kzalloc(sizeof(struct cio), GFP_KERNEL); + if (!cio) + return -ENOMEM; + cio->ranges = ranges; + atomic_set(&cio->refcount, 1); + cio->waiter = current; + cio->endio = end_io; + cio->private = private; + if (bdev_is_zoned(dst_bdev)) { + INIT_LIST_HEAD(&cio->list); + spin_lock_init(&cio->list_lock); + } + + max_copy_len = min(bdev_max_copy_sectors(src_bdev), + bdev_max_copy_sectors(dst_bdev)) << SECTOR_SHIFT; + + for (ri = 0; ri < nr; ri++) { + cio->ranges[ri].comp_len = ranges[ri].len; + src_blk = ranges[ri].src; + dst_blk = ranges[ri].dst; + for (rem = ranges[ri].len; rem > 0; rem -= copy_len) { + copy_len = min(rem, max_copy_len); + + token = alloc_page(gfp_mask); + if (unlikely(!token)) { + ret = -ENOMEM; + goto err_token; + } + + ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask); + if (!ctx) { + ret = -ENOMEM; + goto err_ctx; + } + read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY + | REQ_SYNC | REQ_NOMERGE, gfp_mask); + if (!read_bio) { + ret = -ENOMEM; + goto err_read_bio; + } + write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE + | REQ_COPY | REQ_SYNC | REQ_NOMERGE, + gfp_mask); + if (!write_bio) { + cio->io_err = -ENOMEM; + goto err_write_bio; + } + + ctx->cio = cio; + ctx->range_idx = ri; + ctx->write_bio = write_bio; + atomic_set(&ctx->refcount, 1); + + if (bdev_is_zoned(dst_bdev)) { + INIT_WORK(&ctx->dispatch_work, + blk_zoned_copy_dispatch_work_fn); + INIT_LIST_HEAD(&ctx->list); + spin_lock_irqsave(&cio->list_lock, flags); + ctx->status = REQ_COPY_READ_PROGRESS; + list_add_tail(&ctx->list, &cio->list); + spin_unlock_irqrestore(&cio->list_lock, flags); + } else + INIT_WORK(&ctx->dispatch_work, + blk_copy_dispatch_work_fn); + + __bio_add_page(read_bio, token, PAGE_SIZE, 0); + read_bio->bi_iter.bi_size = copy_len; + read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT; + read_bio->bi_end_io = blk_copy_offload_read_end_io; + read_bio->bi_private = ctx; + + __bio_add_page(write_bio, token, PAGE_SIZE, 0); + write_bio->bi_iter.bi_size = copy_len; + write_bio->bi_end_io = blk_copy_offload_write_end_io; + write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT; + write_bio->bi_private = ctx; + + atomic_inc(&cio->refcount); + submit_bio(read_bio); + src_blk += copy_len; + dst_blk += copy_len; + } + } + + /* Wait for completion of all IO's*/ + return cio_await_completion(cio); + +err_write_bio: + bio_put(read_bio); +err_read_bio: + kfree(ctx); +err_ctx: + __free_page(token); +err_token: + ranges[ri].comp_len = min_t(sector_t, + ranges[ri].comp_len, (ranges[ri].len - rem)); + + cio->io_err = ret; + return cio_await_completion(cio); +} + +static inline int blk_copy_sanity_check(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, int nr) +{ + unsigned int align_mask = max(bdev_logical_block_size(dst_bdev), + bdev_logical_block_size(src_bdev)) - 1; + sector_t len = 0; + int i; + + if (!nr) + return -EINVAL; + + if (nr >= MAX_COPY_NR_RANGE) + return -EINVAL; + + if (bdev_read_only(dst_bdev)) + return -EPERM; + + for (i = 0; i < nr; i++) { + if (!ranges[i].len) + return -EINVAL; + + len += ranges[i].len; + if ((ranges[i].dst & align_mask) || + (ranges[i].src & align_mask) || + (ranges[i].len & align_mask)) + return -EINVAL; + ranges[i].comp_len = 0; + } + + if (len && len >= MAX_COPY_TOTAL_LENGTH) + return -EINVAL; + + return 0; +} + +static inline bool blk_check_copy_offload(struct request_queue *src_q, + struct request_queue *dst_q) +{ + return blk_queue_copy(dst_q) && blk_queue_copy(src_q); +} + +/* + * blkdev_issue_copy - queue a copy + * @src_bdev: source block device + * @dst_bdev: destination block device + * @ranges: array of source/dest/len, + * ranges are expected to be allocated/freed by caller + * @nr: number of source ranges to copy + * @end_io: end_io function to be called on completion of copy operation, + * for synchronous operation this should be NULL + * @private: end_io function will be called with this private data, should be + * NULL, if operation is synchronous in nature + * @gfp_mask: memory allocation flags (for bio_alloc) + * + * Description: + * Copy source ranges from source block device to destination block + * device. length of a source range cannot be zero. Max total length of + * copy is limited to MAX_COPY_TOTAL_LENGTH and also maximum number of + * entries is limited to MAX_COPY_NR_RANGE + */ +int blkdev_issue_copy(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, int nr, + cio_iodone_t end_io, void *private, gfp_t gfp_mask) +{ + struct request_queue *src_q = bdev_get_queue(src_bdev); + struct request_queue *dst_q = bdev_get_queue(dst_bdev); + int ret = -EINVAL; + + ret = blk_copy_sanity_check(src_bdev, dst_bdev, ranges, nr); + if (ret) + return ret; + + if (blk_check_copy_offload(src_q, dst_q)) + ret = blk_copy_offload(src_bdev, dst_bdev, ranges, nr, + end_io, private, gfp_mask); + + return ret; +} +EXPORT_SYMBOL_GPL(blkdev_issue_copy); + static int __blkdev_issue_write_zeroes(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, struct bio **biop, unsigned flags) diff --git a/block/blk.h b/block/blk.h index 5929559acd71..6d534047f20d 100644 --- a/block/blk.h +++ b/block/blk.h @@ -308,6 +308,8 @@ static inline bool bio_may_exceed_limits(struct bio *bio, break; } + if (unlikely(op_is_copy(bio->bi_opf))) + return false; /* * All drivers must accept single-segments bios that are <= PAGE_SIZE. * This is a quick and dirty check that relies on the fact that diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index e0b098089ef2..71278c862bba 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -422,6 +422,7 @@ enum req_flag_bits { */ /* for REQ_OP_WRITE_ZEROES: */ __REQ_NOUNMAP, /* do not free blocks when zeroing */ + __REQ_COPY, /* copy request */ __REQ_NR_BITS, /* stops here */ }; @@ -451,6 +452,7 @@ enum req_flag_bits { #define REQ_DRV (__force blk_opf_t)(1ULL << __REQ_DRV) #define REQ_SWAP (__force blk_opf_t)(1ULL << __REQ_SWAP) +#define REQ_COPY ((__force blk_opf_t)(1ULL << __REQ_COPY)) #define REQ_FAILFAST_MASK \ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) @@ -484,6 +486,11 @@ static inline bool op_is_write(blk_opf_t op) return !!(op & (__force blk_opf_t)1); } +static inline bool op_is_copy(blk_opf_t op) +{ + return (op & REQ_COPY); +} + /* * Check if the bio or request is one that needs special treatment in the * flush state machine. @@ -543,4 +550,41 @@ struct blk_rq_stat { u64 batch; }; +typedef void (cio_iodone_t)(void *private, int status); + +struct cio { + struct range_entry *ranges; + struct task_struct *waiter; /* waiting task (NULL if none) */ + atomic_t refcount; + int io_err; + cio_iodone_t *endio; /* applicable for async operation */ + void *private; /* applicable for async operation */ + + /* For zoned device we maintain a linked list of IO submissions. + * This is to make sure we maintain the order of submissions. + * Otherwise some reads completing out of order, will submit writes not + * aligned with zone write pointer. + */ + struct list_head list; + spinlock_t list_lock; +}; + +enum copy_io_status { + REQ_COPY_READ_PROGRESS, + REQ_COPY_READ_COMPLETE, + REQ_COPY_WRITE_PROGRESS, +}; + +struct copy_ctx { + struct cio *cio; + struct work_struct dispatch_work; + struct bio *write_bio; + atomic_t refcount; + int range_idx; /* used in error/partial completion */ + + /* For zoned device linked list is maintained. Along with state of IO */ + struct list_head list; + enum copy_io_status status; +}; + #endif /* __LINUX_BLK_TYPES_H */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 3ac324208f2f..a3b12ad42ed7 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1065,6 +1065,9 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, struct bio **biop); int blkdev_issue_secure_erase(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp); +int blkdev_issue_copy(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, + int nr, cio_iodone_t end_io, void *private, gfp_t gfp_mask); #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */ #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */ diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index b3ad173f619c..9248b6d259de 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -67,6 +67,21 @@ struct fstrim_range { /* maximum total copy length */ #define MAX_COPY_TOTAL_LENGTH (1 << 27) +/* Maximum no of entries supported */ +#define MAX_COPY_NR_RANGE (1 << 12) + +/* range entry for copy offload, all fields should be byte addressed */ +struct range_entry { + __u64 src; /* source to be copied */ + __u64 dst; /* destination */ + __u64 len; /* length in bytes to be copied */ + + /* length of data copy actually completed. This will be filled by + * kernel, once copy completes + */ + __u64 comp_len; +}; + /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */ #define FILE_DEDUPE_RANGE_SAME 0 #define FILE_DEDUPE_RANGE_DIFFERS 1 -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 02/10] block: Add copy offload support infrastructure @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, nitheshshetty Introduce blkdev_issue_copy which supports source and destination bdevs, and an array of (source, destination and copy length) tuples. Introduce REQ_COPY copy offload operation flag. Create a read-write bio pair with a token as payload and submitted to the device in order. Read request populates token with source specific information which is then passed with write request. This design is courtesy Mikulas Patocka's token based copy Larger copy will be divided, based on max_copy_sectors limit. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- block/blk-lib.c | 358 ++++++++++++++++++++++++++++++++++++++ block/blk.h | 2 + include/linux/blk_types.h | 44 +++++ include/linux/blkdev.h | 3 + include/uapi/linux/fs.h | 15 ++ 5 files changed, 422 insertions(+) diff --git a/block/blk-lib.c b/block/blk-lib.c index e59c3069e835..2ce3c872ca49 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -115,6 +115,364 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, } EXPORT_SYMBOL(blkdev_issue_discard); +/* + * For synchronous copy offload/emulation, wait and process all in-flight BIOs. + * This must only be called once all bios have been issued so that the refcount + * can only decrease. This just waits for all bios to make it through + * bio_copy_*_write_end_io. IO errors are propagated through cio->io_error. + */ +static int cio_await_completion(struct cio *cio) +{ + int ret = 0; + + atomic_dec(&cio->refcount); + + if (cio->endio) + return 0; + + if (atomic_read(&cio->refcount)) { + __set_current_state(TASK_UNINTERRUPTIBLE); + blk_io_schedule(); + } + + ret = cio->io_err; + kfree(cio); + + return ret; +} + +static void blk_copy_offload_write_end_io(struct bio *bio) +{ + struct copy_ctx *ctx = bio->bi_private; + struct cio *cio = ctx->cio; + sector_t clen; + int ri = ctx->range_idx; + + if (bio->bi_status) { + cio->io_err = blk_status_to_errno(bio->bi_status); + clen = (bio->bi_iter.bi_sector << SECTOR_SHIFT) - + cio->ranges[ri].dst; + cio->ranges[ri].comp_len = min_t(sector_t, clen, + cio->ranges[ri].comp_len); + } + __free_page(bio->bi_io_vec[0].bv_page); + bio_put(bio); + + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + if (atomic_dec_and_test(&cio->refcount)) { + if (cio->endio) { + cio->endio(cio->private, cio->io_err); + kfree(cio); + } else + blk_wake_io_task(cio->waiter); + } +} + +static void blk_copy_offload_read_end_io(struct bio *read_bio) +{ + struct copy_ctx *ctx = read_bio->bi_private; + struct cio *cio = ctx->cio; + sector_t clen; + int ri = ctx->range_idx; + unsigned long flags; + + if (read_bio->bi_status) { + cio->io_err = blk_status_to_errno(read_bio->bi_status); + goto err_rw_bio; + } + + /* For zoned device, we check if completed bio is first entry in linked + * list, + * if yes, we start the worker to submit write bios. + * if not, then we just update status of bio in ctx, + * once the worker gets scheduled, it will submit writes for all + * the consecutive REQ_COPY_READ_COMPLETE bios. + */ + if (bdev_is_zoned(ctx->write_bio->bi_bdev)) { + spin_lock_irqsave(&cio->list_lock, flags); + ctx->status = REQ_COPY_READ_COMPLETE; + if (ctx == list_first_entry(&cio->list, + struct copy_ctx, list)) { + spin_unlock_irqrestore(&cio->list_lock, flags); + schedule_work(&ctx->dispatch_work); + goto free_read_bio; + } + spin_unlock_irqrestore(&cio->list_lock, flags); + } else + schedule_work(&ctx->dispatch_work); + +free_read_bio: + bio_put(read_bio); + + return; + +err_rw_bio: + clen = (read_bio->bi_iter.bi_sector << SECTOR_SHIFT) - + cio->ranges[ri].src; + cio->ranges[ri].comp_len = min_t(sector_t, clen, + cio->ranges[ri].comp_len); + __free_page(read_bio->bi_io_vec[0].bv_page); + bio_put(ctx->write_bio); + bio_put(read_bio); + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + if (atomic_dec_and_test(&cio->refcount)) { + if (cio->endio) { + cio->endio(cio->private, cio->io_err); + kfree(cio); + } else + blk_wake_io_task(cio->waiter); + } +} + +static void blk_copy_dispatch_work_fn(struct work_struct *work) +{ + struct copy_ctx *ctx = container_of(work, struct copy_ctx, + dispatch_work); + + submit_bio(ctx->write_bio); +} + +static void blk_zoned_copy_dispatch_work_fn(struct work_struct *work) +{ + struct copy_ctx *ctx = container_of(work, struct copy_ctx, + dispatch_work); + struct cio *cio = ctx->cio; + unsigned long flags = 0; + + atomic_inc(&cio->refcount); + spin_lock_irqsave(&cio->list_lock, flags); + + while (!list_empty(&cio->list)) { + ctx = list_first_entry(&cio->list, struct copy_ctx, list); + + if (ctx->status == REQ_COPY_READ_PROGRESS) + break; + + atomic_inc(&ctx->refcount); + ctx->status = REQ_COPY_WRITE_PROGRESS; + spin_unlock_irqrestore(&cio->list_lock, flags); + submit_bio(ctx->write_bio); + spin_lock_irqsave(&cio->list_lock, flags); + + list_del(&ctx->list); + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + } + + spin_unlock_irqrestore(&cio->list_lock, flags); + if (atomic_dec_and_test(&cio->refcount)) + blk_wake_io_task(cio->waiter); +} + +/* + * blk_copy_offload - Use device's native copy offload feature. + * we perform copy operation by sending 2 bio. + * 1. First we send a read bio with REQ_COPY flag along with a token and source + * and length. Once read bio reaches driver layer, device driver adds all the + * source info to token and does a fake completion. + * 2. Once read opration completes, we issue write with REQ_COPY flag with same + * token. In driver layer, token info is used to form a copy offload command. + * + * For conventional devices we submit write bio independentenly once read + * completes. For zoned devices , reads can complete out of order, so we + * maintain a linked list and submit writes in the order, reads are submitted. + */ +static int blk_copy_offload(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, + int nr, cio_iodone_t end_io, void *private, gfp_t gfp_mask) +{ + struct cio *cio; + struct copy_ctx *ctx; + struct bio *read_bio, *write_bio; + struct page *token; + sector_t src_blk, copy_len, dst_blk; + sector_t rem, max_copy_len; + int ri = 0, ret = 0; + unsigned long flags; + + cio = kzalloc(sizeof(struct cio), GFP_KERNEL); + if (!cio) + return -ENOMEM; + cio->ranges = ranges; + atomic_set(&cio->refcount, 1); + cio->waiter = current; + cio->endio = end_io; + cio->private = private; + if (bdev_is_zoned(dst_bdev)) { + INIT_LIST_HEAD(&cio->list); + spin_lock_init(&cio->list_lock); + } + + max_copy_len = min(bdev_max_copy_sectors(src_bdev), + bdev_max_copy_sectors(dst_bdev)) << SECTOR_SHIFT; + + for (ri = 0; ri < nr; ri++) { + cio->ranges[ri].comp_len = ranges[ri].len; + src_blk = ranges[ri].src; + dst_blk = ranges[ri].dst; + for (rem = ranges[ri].len; rem > 0; rem -= copy_len) { + copy_len = min(rem, max_copy_len); + + token = alloc_page(gfp_mask); + if (unlikely(!token)) { + ret = -ENOMEM; + goto err_token; + } + + ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask); + if (!ctx) { + ret = -ENOMEM; + goto err_ctx; + } + read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY + | REQ_SYNC | REQ_NOMERGE, gfp_mask); + if (!read_bio) { + ret = -ENOMEM; + goto err_read_bio; + } + write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE + | REQ_COPY | REQ_SYNC | REQ_NOMERGE, + gfp_mask); + if (!write_bio) { + cio->io_err = -ENOMEM; + goto err_write_bio; + } + + ctx->cio = cio; + ctx->range_idx = ri; + ctx->write_bio = write_bio; + atomic_set(&ctx->refcount, 1); + + if (bdev_is_zoned(dst_bdev)) { + INIT_WORK(&ctx->dispatch_work, + blk_zoned_copy_dispatch_work_fn); + INIT_LIST_HEAD(&ctx->list); + spin_lock_irqsave(&cio->list_lock, flags); + ctx->status = REQ_COPY_READ_PROGRESS; + list_add_tail(&ctx->list, &cio->list); + spin_unlock_irqrestore(&cio->list_lock, flags); + } else + INIT_WORK(&ctx->dispatch_work, + blk_copy_dispatch_work_fn); + + __bio_add_page(read_bio, token, PAGE_SIZE, 0); + read_bio->bi_iter.bi_size = copy_len; + read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT; + read_bio->bi_end_io = blk_copy_offload_read_end_io; + read_bio->bi_private = ctx; + + __bio_add_page(write_bio, token, PAGE_SIZE, 0); + write_bio->bi_iter.bi_size = copy_len; + write_bio->bi_end_io = blk_copy_offload_write_end_io; + write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT; + write_bio->bi_private = ctx; + + atomic_inc(&cio->refcount); + submit_bio(read_bio); + src_blk += copy_len; + dst_blk += copy_len; + } + } + + /* Wait for completion of all IO's*/ + return cio_await_completion(cio); + +err_write_bio: + bio_put(read_bio); +err_read_bio: + kfree(ctx); +err_ctx: + __free_page(token); +err_token: + ranges[ri].comp_len = min_t(sector_t, + ranges[ri].comp_len, (ranges[ri].len - rem)); + + cio->io_err = ret; + return cio_await_completion(cio); +} + +static inline int blk_copy_sanity_check(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, int nr) +{ + unsigned int align_mask = max(bdev_logical_block_size(dst_bdev), + bdev_logical_block_size(src_bdev)) - 1; + sector_t len = 0; + int i; + + if (!nr) + return -EINVAL; + + if (nr >= MAX_COPY_NR_RANGE) + return -EINVAL; + + if (bdev_read_only(dst_bdev)) + return -EPERM; + + for (i = 0; i < nr; i++) { + if (!ranges[i].len) + return -EINVAL; + + len += ranges[i].len; + if ((ranges[i].dst & align_mask) || + (ranges[i].src & align_mask) || + (ranges[i].len & align_mask)) + return -EINVAL; + ranges[i].comp_len = 0; + } + + if (len && len >= MAX_COPY_TOTAL_LENGTH) + return -EINVAL; + + return 0; +} + +static inline bool blk_check_copy_offload(struct request_queue *src_q, + struct request_queue *dst_q) +{ + return blk_queue_copy(dst_q) && blk_queue_copy(src_q); +} + +/* + * blkdev_issue_copy - queue a copy + * @src_bdev: source block device + * @dst_bdev: destination block device + * @ranges: array of source/dest/len, + * ranges are expected to be allocated/freed by caller + * @nr: number of source ranges to copy + * @end_io: end_io function to be called on completion of copy operation, + * for synchronous operation this should be NULL + * @private: end_io function will be called with this private data, should be + * NULL, if operation is synchronous in nature + * @gfp_mask: memory allocation flags (for bio_alloc) + * + * Description: + * Copy source ranges from source block device to destination block + * device. length of a source range cannot be zero. Max total length of + * copy is limited to MAX_COPY_TOTAL_LENGTH and also maximum number of + * entries is limited to MAX_COPY_NR_RANGE + */ +int blkdev_issue_copy(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, int nr, + cio_iodone_t end_io, void *private, gfp_t gfp_mask) +{ + struct request_queue *src_q = bdev_get_queue(src_bdev); + struct request_queue *dst_q = bdev_get_queue(dst_bdev); + int ret = -EINVAL; + + ret = blk_copy_sanity_check(src_bdev, dst_bdev, ranges, nr); + if (ret) + return ret; + + if (blk_check_copy_offload(src_q, dst_q)) + ret = blk_copy_offload(src_bdev, dst_bdev, ranges, nr, + end_io, private, gfp_mask); + + return ret; +} +EXPORT_SYMBOL_GPL(blkdev_issue_copy); + static int __blkdev_issue_write_zeroes(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, struct bio **biop, unsigned flags) diff --git a/block/blk.h b/block/blk.h index 5929559acd71..6d534047f20d 100644 --- a/block/blk.h +++ b/block/blk.h @@ -308,6 +308,8 @@ static inline bool bio_may_exceed_limits(struct bio *bio, break; } + if (unlikely(op_is_copy(bio->bi_opf))) + return false; /* * All drivers must accept single-segments bios that are <= PAGE_SIZE. * This is a quick and dirty check that relies on the fact that diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index e0b098089ef2..71278c862bba 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -422,6 +422,7 @@ enum req_flag_bits { */ /* for REQ_OP_WRITE_ZEROES: */ __REQ_NOUNMAP, /* do not free blocks when zeroing */ + __REQ_COPY, /* copy request */ __REQ_NR_BITS, /* stops here */ }; @@ -451,6 +452,7 @@ enum req_flag_bits { #define REQ_DRV (__force blk_opf_t)(1ULL << __REQ_DRV) #define REQ_SWAP (__force blk_opf_t)(1ULL << __REQ_SWAP) +#define REQ_COPY ((__force blk_opf_t)(1ULL << __REQ_COPY)) #define REQ_FAILFAST_MASK \ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) @@ -484,6 +486,11 @@ static inline bool op_is_write(blk_opf_t op) return !!(op & (__force blk_opf_t)1); } +static inline bool op_is_copy(blk_opf_t op) +{ + return (op & REQ_COPY); +} + /* * Check if the bio or request is one that needs special treatment in the * flush state machine. @@ -543,4 +550,41 @@ struct blk_rq_stat { u64 batch; }; +typedef void (cio_iodone_t)(void *private, int status); + +struct cio { + struct range_entry *ranges; + struct task_struct *waiter; /* waiting task (NULL if none) */ + atomic_t refcount; + int io_err; + cio_iodone_t *endio; /* applicable for async operation */ + void *private; /* applicable for async operation */ + + /* For zoned device we maintain a linked list of IO submissions. + * This is to make sure we maintain the order of submissions. + * Otherwise some reads completing out of order, will submit writes not + * aligned with zone write pointer. + */ + struct list_head list; + spinlock_t list_lock; +}; + +enum copy_io_status { + REQ_COPY_READ_PROGRESS, + REQ_COPY_READ_COMPLETE, + REQ_COPY_WRITE_PROGRESS, +}; + +struct copy_ctx { + struct cio *cio; + struct work_struct dispatch_work; + struct bio *write_bio; + atomic_t refcount; + int range_idx; /* used in error/partial completion */ + + /* For zoned device linked list is maintained. Along with state of IO */ + struct list_head list; + enum copy_io_status status; +}; + #endif /* __LINUX_BLK_TYPES_H */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 3ac324208f2f..a3b12ad42ed7 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1065,6 +1065,9 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, struct bio **biop); int blkdev_issue_secure_erase(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp); +int blkdev_issue_copy(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, + int nr, cio_iodone_t end_io, void *private, gfp_t gfp_mask); #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */ #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */ diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index b3ad173f619c..9248b6d259de 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -67,6 +67,21 @@ struct fstrim_range { /* maximum total copy length */ #define MAX_COPY_TOTAL_LENGTH (1 << 27) +/* Maximum no of entries supported */ +#define MAX_COPY_NR_RANGE (1 << 12) + +/* range entry for copy offload, all fields should be byte addressed */ +struct range_entry { + __u64 src; /* source to be copied */ + __u64 dst; /* destination */ + __u64 len; /* length in bytes to be copied */ + + /* length of data copy actually completed. This will be filled by + * kernel, once copy completes + */ + __u64 comp_len; +}; + /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */ #define FILE_DEDUPE_RANGE_SAME 0 #define FILE_DEDUPE_RANGE_DIFFERS 1 -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
* Re: [PATCH v5 02/10] block: Add copy offload support infrastructure 2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty @ 2022-11-23 8:04 ` Ming Lei -1 siblings, 0 replies; 67+ messages in thread From: Ming Lei @ 2022-11-23 8:04 UTC (permalink / raw) To: Nitesh Shetty Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, ming.lei On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > Introduce blkdev_issue_copy which supports source and destination bdevs, > and an array of (source, destination and copy length) tuples. > Introduce REQ_COPY copy offload operation flag. Create a read-write > bio pair with a token as payload and submitted to the device in order. > Read request populates token with source specific information which > is then passed with write request. > This design is courtesy Mikulas Patocka's token based copy I thought this patchset is just for enabling copy command which is supported by hardware. But turns out it isn't, because blk_copy_offload() still submits read/write bios for doing the copy. I am just wondering why not let copy_file_range() cover this kind of copy, and the framework has been there. When I was researching pipe/splice code for supporting ublk zero copy[1], I have got idea for async copy_file_range(), such as: io uring based direct splice, user backed intermediate buffer, still zero copy, if these ideas are finally implemented, we could get super-fast generic offload copy, and bdev copy is really covered too. [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ thanks, Ming ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 02/10] block: Add copy offload support infrastructure @ 2022-11-23 8:04 ` Ming Lei 0 siblings, 0 replies; 67+ messages in thread From: Ming Lei @ 2022-11-23 8:04 UTC (permalink / raw) To: Nitesh Shetty Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, ming.lei, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > Introduce blkdev_issue_copy which supports source and destination bdevs, > and an array of (source, destination and copy length) tuples. > Introduce REQ_COPY copy offload operation flag. Create a read-write > bio pair with a token as payload and submitted to the device in order. > Read request populates token with source specific information which > is then passed with write request. > This design is courtesy Mikulas Patocka's token based copy I thought this patchset is just for enabling copy command which is supported by hardware. But turns out it isn't, because blk_copy_offload() still submits read/write bios for doing the copy. I am just wondering why not let copy_file_range() cover this kind of copy, and the framework has been there. When I was researching pipe/splice code for supporting ublk zero copy[1], I have got idea for async copy_file_range(), such as: io uring based direct splice, user backed intermediate buffer, still zero copy, if these ideas are finally implemented, we could get super-fast generic offload copy, and bdev copy is really covered too. [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ thanks, Ming -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 02/10] block: Add copy offload support infrastructure 2022-11-23 8:04 ` [dm-devel] " Ming Lei @ 2022-11-23 10:07 ` Nitesh Shetty -1 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 10:07 UTC (permalink / raw) To: Ming Lei Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev [-- Attachment #1: Type: text/plain, Size: 2380 bytes --] On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > and an array of (source, destination and copy length) tuples. > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > bio pair with a token as payload and submitted to the device in order. > > Read request populates token with source specific information which > > is then passed with write request. > > This design is courtesy Mikulas Patocka's token based copy > > I thought this patchset is just for enabling copy command which is > supported by hardware. But turns out it isn't, because blk_copy_offload() > still submits read/write bios for doing the copy. > > I am just wondering why not let copy_file_range() cover this kind of copy, > and the framework has been there. > Main goal was to enable copy command, but community suggested to add copy emulation as well. blk_copy_offload - actually issues copy command in driver layer. The way read/write BIOs are percieved is different for copy offload. In copy offload we check REQ_COPY flag in NVMe driver layer to issue copy command. But we did missed it to add in other driver's, where they might be treated as normal READ/WRITE. blk_copy_emulate - is used if we fail or if device doesn't support native copy offload command. Here we do READ/WRITE. Using copy_file_range for emulation might be possible, but we see 2 issues here. 1. We explored possibility of pulling dm-kcopyd to block layer so that we can readily use it. But we found it had many dependecies from dm-layer. So later dropped that idea. 2. copy_file_range, for block device atleast we saw few check's which fail it for raw block device. At this point I dont know much about the history of why such check is present. > When I was researching pipe/splice code for supporting ublk zero copy[1], I > have got idea for async copy_file_range(), such as: io uring based > direct splice, user backed intermediate buffer, still zero copy, if these > ideas are finally implemented, we could get super-fast generic offload copy, > and bdev copy is really covered too. > > [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ > Seems interesting, We will take a look into this. > > Thanks, Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 02/10] block: Add copy offload support infrastructure @ 2022-11-23 10:07 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 10:07 UTC (permalink / raw) To: Ming Lei Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty [-- Attachment #1: Type: text/plain, Size: 2380 bytes --] On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > and an array of (source, destination and copy length) tuples. > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > bio pair with a token as payload and submitted to the device in order. > > Read request populates token with source specific information which > > is then passed with write request. > > This design is courtesy Mikulas Patocka's token based copy > > I thought this patchset is just for enabling copy command which is > supported by hardware. But turns out it isn't, because blk_copy_offload() > still submits read/write bios for doing the copy. > > I am just wondering why not let copy_file_range() cover this kind of copy, > and the framework has been there. > Main goal was to enable copy command, but community suggested to add copy emulation as well. blk_copy_offload - actually issues copy command in driver layer. The way read/write BIOs are percieved is different for copy offload. In copy offload we check REQ_COPY flag in NVMe driver layer to issue copy command. But we did missed it to add in other driver's, where they might be treated as normal READ/WRITE. blk_copy_emulate - is used if we fail or if device doesn't support native copy offload command. Here we do READ/WRITE. Using copy_file_range for emulation might be possible, but we see 2 issues here. 1. We explored possibility of pulling dm-kcopyd to block layer so that we can readily use it. But we found it had many dependecies from dm-layer. So later dropped that idea. 2. copy_file_range, for block device atleast we saw few check's which fail it for raw block device. At this point I dont know much about the history of why such check is present. > When I was researching pipe/splice code for supporting ublk zero copy[1], I > have got idea for async copy_file_range(), such as: io uring based > direct splice, user backed intermediate buffer, still zero copy, if these > ideas are finally implemented, we could get super-fast generic offload copy, > and bdev copy is really covered too. > > [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ > Seems interesting, We will take a look into this. > > Thanks, Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 02/10] block: Add copy offload support infrastructure 2022-11-23 10:07 ` [dm-devel] " Nitesh Shetty @ 2022-11-24 0:03 ` Ming Lei -1 siblings, 0 replies; 67+ messages in thread From: Ming Lei @ 2022-11-24 0:03 UTC (permalink / raw) To: Nitesh Shetty Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, ming.lei On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > and an array of (source, destination and copy length) tuples. > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > bio pair with a token as payload and submitted to the device in order. > > > Read request populates token with source specific information which > > > is then passed with write request. > > > This design is courtesy Mikulas Patocka's token based copy > > > > I thought this patchset is just for enabling copy command which is > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > still submits read/write bios for doing the copy. > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > and the framework has been there. > > > > Main goal was to enable copy command, but community suggested to add > copy emulation as well. > > blk_copy_offload - actually issues copy command in driver layer. > The way read/write BIOs are percieved is different for copy offload. > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > copy command. But we did missed it to add in other driver's, where they > might be treated as normal READ/WRITE. > > blk_copy_emulate - is used if we fail or if device doesn't support native > copy offload command. Here we do READ/WRITE. Using copy_file_range for > emulation might be possible, but we see 2 issues here. > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > can readily use it. But we found it had many dependecies from dm-layer. > So later dropped that idea. Is it just because dm-kcopyd supports async copy? If yes, I believe we can reply on io_uring for implementing async copy_file_range, which will be generic interface for async copy, and could get better perf. > 2. copy_file_range, for block device atleast we saw few check's which fail > it for raw block device. At this point I dont know much about the history of > why such check is present. Got it, but IMO the check in generic_copy_file_checks() can be relaxed to cover blkdev cause splice does support blkdev. Then your bdev offload copy work can be simplified into: 1) implement .copy_file_range for def_blk_fops, suppose it is blkdev_copy_file_range() 2) inside blkdev_copy_file_range() - if the bdev supports offload copy, just submit one bio to the device, and this will be converted to one pt req to device - otherwise, fallback to generic_copy_file_range() > > > When I was researching pipe/splice code for supporting ublk zero copy[1], I > > have got idea for async copy_file_range(), such as: io uring based > > direct splice, user backed intermediate buffer, still zero copy, if these > > ideas are finally implemented, we could get super-fast generic offload copy, > > and bdev copy is really covered too. > > > > [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ > > > > Seems interesting, We will take a look into this. BTW, that is probably one direction of ublk's async zero copy IO too. Thanks, Ming ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 02/10] block: Add copy offload support infrastructure @ 2022-11-24 0:03 ` Ming Lei 0 siblings, 0 replies; 67+ messages in thread From: Ming Lei @ 2022-11-24 0:03 UTC (permalink / raw) To: Nitesh Shetty Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, ming.lei, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > and an array of (source, destination and copy length) tuples. > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > bio pair with a token as payload and submitted to the device in order. > > > Read request populates token with source specific information which > > > is then passed with write request. > > > This design is courtesy Mikulas Patocka's token based copy > > > > I thought this patchset is just for enabling copy command which is > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > still submits read/write bios for doing the copy. > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > and the framework has been there. > > > > Main goal was to enable copy command, but community suggested to add > copy emulation as well. > > blk_copy_offload - actually issues copy command in driver layer. > The way read/write BIOs are percieved is different for copy offload. > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > copy command. But we did missed it to add in other driver's, where they > might be treated as normal READ/WRITE. > > blk_copy_emulate - is used if we fail or if device doesn't support native > copy offload command. Here we do READ/WRITE. Using copy_file_range for > emulation might be possible, but we see 2 issues here. > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > can readily use it. But we found it had many dependecies from dm-layer. > So later dropped that idea. Is it just because dm-kcopyd supports async copy? If yes, I believe we can reply on io_uring for implementing async copy_file_range, which will be generic interface for async copy, and could get better perf. > 2. copy_file_range, for block device atleast we saw few check's which fail > it for raw block device. At this point I dont know much about the history of > why such check is present. Got it, but IMO the check in generic_copy_file_checks() can be relaxed to cover blkdev cause splice does support blkdev. Then your bdev offload copy work can be simplified into: 1) implement .copy_file_range for def_blk_fops, suppose it is blkdev_copy_file_range() 2) inside blkdev_copy_file_range() - if the bdev supports offload copy, just submit one bio to the device, and this will be converted to one pt req to device - otherwise, fallback to generic_copy_file_range() > > > When I was researching pipe/splice code for supporting ublk zero copy[1], I > > have got idea for async copy_file_range(), such as: io uring based > > direct splice, user backed intermediate buffer, still zero copy, if these > > ideas are finally implemented, we could get super-fast generic offload copy, > > and bdev copy is really covered too. > > > > [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ > > > > Seems interesting, We will take a look into this. BTW, that is probably one direction of ublk's async zero copy IO too. Thanks, Ming -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 02/10] block: Add copy offload support infrastructure 2022-11-24 0:03 ` [dm-devel] " Ming Lei @ 2022-11-29 11:44 ` Nitesh Shetty -1 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-29 11:44 UTC (permalink / raw) To: Ming Lei Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev [-- Attachment #1: Type: text/plain, Size: 4006 bytes --] On Thu, Nov 24, 2022 at 08:03:56AM +0800, Ming Lei wrote: > On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > > and an array of (source, destination and copy length) tuples. > > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > > bio pair with a token as payload and submitted to the device in order. > > > > Read request populates token with source specific information which > > > > is then passed with write request. > > > > This design is courtesy Mikulas Patocka's token based copy > > > > > > I thought this patchset is just for enabling copy command which is > > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > > still submits read/write bios for doing the copy. > > > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > > and the framework has been there. > > > > > > > Main goal was to enable copy command, but community suggested to add > > copy emulation as well. > > > > blk_copy_offload - actually issues copy command in driver layer. > > The way read/write BIOs are percieved is different for copy offload. > > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > > copy command. But we did missed it to add in other driver's, where they > > might be treated as normal READ/WRITE. > > > > blk_copy_emulate - is used if we fail or if device doesn't support native > > copy offload command. Here we do READ/WRITE. Using copy_file_range for > > emulation might be possible, but we see 2 issues here. > > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > > can readily use it. But we found it had many dependecies from dm-layer. > > So later dropped that idea. > > Is it just because dm-kcopyd supports async copy? If yes, I believe we > can reply on io_uring for implementing async copy_file_range, which will > be generic interface for async copy, and could get better perf. > It supports both sync and async. But used only inside dm-layer. Async version of copy_file_range can help, using io-uring can be helpful for user , but in-kernel users can't use uring. > > 2. copy_file_range, for block device atleast we saw few check's which fail > > it for raw block device. At this point I dont know much about the history of > > why such check is present. > > Got it, but IMO the check in generic_copy_file_checks() can be > relaxed to cover blkdev cause splice does support blkdev. > > Then your bdev offload copy work can be simplified into: > > 1) implement .copy_file_range for def_blk_fops, suppose it is > blkdev_copy_file_range() > > 2) inside blkdev_copy_file_range() > > - if the bdev supports offload copy, just submit one bio to the device, > and this will be converted to one pt req to device > > - otherwise, fallback to generic_copy_file_range() > We will check the feasibilty and try to implement the scheme in next versions. It would be helpful, if someone in community know's why such checks were present ? We see copy_file_range accepts only regular file. Was it designed only for regular files or can we extend it to regular block device. > > > > > When I was researching pipe/splice code for supporting ublk zero copy[1], I > > > have got idea for async copy_file_range(), such as: io uring based > > > direct splice, user backed intermediate buffer, still zero copy, if these > > > ideas are finally implemented, we could get super-fast generic offload copy, > > > and bdev copy is really covered too. > > > > > > [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ > > > > > > > Seems interesting, We will take a look into this. > > BTW, that is probably one direction of ublk's async zero copy IO too. > > > Thanks, > Ming > > Thanks, Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 02/10] block: Add copy offload support infrastructure @ 2022-11-29 11:44 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-29 11:44 UTC (permalink / raw) To: Ming Lei Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty [-- Attachment #1: Type: text/plain, Size: 4006 bytes --] On Thu, Nov 24, 2022 at 08:03:56AM +0800, Ming Lei wrote: > On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > > and an array of (source, destination and copy length) tuples. > > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > > bio pair with a token as payload and submitted to the device in order. > > > > Read request populates token with source specific information which > > > > is then passed with write request. > > > > This design is courtesy Mikulas Patocka's token based copy > > > > > > I thought this patchset is just for enabling copy command which is > > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > > still submits read/write bios for doing the copy. > > > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > > and the framework has been there. > > > > > > > Main goal was to enable copy command, but community suggested to add > > copy emulation as well. > > > > blk_copy_offload - actually issues copy command in driver layer. > > The way read/write BIOs are percieved is different for copy offload. > > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > > copy command. But we did missed it to add in other driver's, where they > > might be treated as normal READ/WRITE. > > > > blk_copy_emulate - is used if we fail or if device doesn't support native > > copy offload command. Here we do READ/WRITE. Using copy_file_range for > > emulation might be possible, but we see 2 issues here. > > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > > can readily use it. But we found it had many dependecies from dm-layer. > > So later dropped that idea. > > Is it just because dm-kcopyd supports async copy? If yes, I believe we > can reply on io_uring for implementing async copy_file_range, which will > be generic interface for async copy, and could get better perf. > It supports both sync and async. But used only inside dm-layer. Async version of copy_file_range can help, using io-uring can be helpful for user , but in-kernel users can't use uring. > > 2. copy_file_range, for block device atleast we saw few check's which fail > > it for raw block device. At this point I dont know much about the history of > > why such check is present. > > Got it, but IMO the check in generic_copy_file_checks() can be > relaxed to cover blkdev cause splice does support blkdev. > > Then your bdev offload copy work can be simplified into: > > 1) implement .copy_file_range for def_blk_fops, suppose it is > blkdev_copy_file_range() > > 2) inside blkdev_copy_file_range() > > - if the bdev supports offload copy, just submit one bio to the device, > and this will be converted to one pt req to device > > - otherwise, fallback to generic_copy_file_range() > We will check the feasibilty and try to implement the scheme in next versions. It would be helpful, if someone in community know's why such checks were present ? We see copy_file_range accepts only regular file. Was it designed only for regular files or can we extend it to regular block device. > > > > > When I was researching pipe/splice code for supporting ublk zero copy[1], I > > > have got idea for async copy_file_range(), such as: io uring based > > > direct splice, user backed intermediate buffer, still zero copy, if these > > > ideas are finally implemented, we could get super-fast generic offload copy, > > > and bdev copy is really covered too. > > > > > > [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ > > > > > > > Seems interesting, We will take a look into this. > > BTW, that is probably one direction of ublk's async zero copy IO too. > > > Thanks, > Ming > > Thanks, Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 02/10] block: Add copy offload support infrastructure 2022-11-29 11:44 ` [dm-devel] " Nitesh Shetty @ 2022-12-07 5:54 ` Nitesh Shetty -1 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-12-07 5:54 UTC (permalink / raw) To: Ming Lei Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev [-- Attachment #1: Type: text/plain, Size: 4809 bytes --] On Tue, Nov 29, 2022 at 05:14:28PM +0530, Nitesh Shetty wrote: > On Thu, Nov 24, 2022 at 08:03:56AM +0800, Ming Lei wrote: > > On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > > > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > > > and an array of (source, destination and copy length) tuples. > > > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > > > bio pair with a token as payload and submitted to the device in order. > > > > > Read request populates token with source specific information which > > > > > is then passed with write request. > > > > > This design is courtesy Mikulas Patocka's token based copy > > > > > > > > I thought this patchset is just for enabling copy command which is > > > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > > > still submits read/write bios for doing the copy. > > > > > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > > > and the framework has been there. > > > > > > > > > > Main goal was to enable copy command, but community suggested to add > > > copy emulation as well. > > > > > > blk_copy_offload - actually issues copy command in driver layer. > > > The way read/write BIOs are percieved is different for copy offload. > > > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > > > copy command. But we did missed it to add in other driver's, where they > > > might be treated as normal READ/WRITE. > > > > > > blk_copy_emulate - is used if we fail or if device doesn't support native > > > copy offload command. Here we do READ/WRITE. Using copy_file_range for > > > emulation might be possible, but we see 2 issues here. > > > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > > > can readily use it. But we found it had many dependecies from dm-layer. > > > So later dropped that idea. > > > > Is it just because dm-kcopyd supports async copy? If yes, I believe we > > can reply on io_uring for implementing async copy_file_range, which will > > be generic interface for async copy, and could get better perf. > > > > It supports both sync and async. But used only inside dm-layer. > Async version of copy_file_range can help, using io-uring can be helpful > for user , but in-kernel users can't use uring. > > > > 2. copy_file_range, for block device atleast we saw few check's which fail > > > it for raw block device. At this point I dont know much about the history of > > > why such check is present. > > > > Got it, but IMO the check in generic_copy_file_checks() can be > > relaxed to cover blkdev cause splice does support blkdev. > > > > Then your bdev offload copy work can be simplified into: > > > > 1) implement .copy_file_range for def_blk_fops, suppose it is > > blkdev_copy_file_range() > > > > 2) inside blkdev_copy_file_range() > > > > - if the bdev supports offload copy, just submit one bio to the device, > > and this will be converted to one pt req to device > > > > - otherwise, fallback to generic_copy_file_range() > > > Actually we sent initial version with single bio, but later community suggested two bio's is must for offload, main reasoning being dm-layer,Xcopy,copy across namespace compatibilty. > We will check the feasibilty and try to implement the scheme in next versions. > It would be helpful, if someone in community know's why such checks were > present ? We see copy_file_range accepts only regular file. Was it > designed only for regular files or can we extend it to regular block > device. > As you suggested we were able to integrate def_blk_ops and run with user application, but we see one main issue with this approach. Using blkdev_copy_file_range requires having 2 file descriptors, which is not possible for in kernel users such as fabrics/dm-kcopyd which has only bdev descriptors. Do you have any plumbing suggestions here ? > > > > > > > When I was researching pipe/splice code for supporting ublk zero copy[1], I > > > > have got idea for async copy_file_range(), such as: io uring based > > > > direct splice, user backed intermediate buffer, still zero copy, if these > > > > ideas are finally implemented, we could get super-fast generic offload copy, > > > > and bdev copy is really covered too. > > > > > > > > [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ > > > > > > > > > > Seems interesting, We will take a look into this. > > > > BTW, that is probably one direction of ublk's async zero copy IO too. > > > > > > Thanks, > > Ming > > > > > > > Thanks, > Nitesh Thanks, Nitesh Shetty [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 02/10] block: Add copy offload support infrastructure @ 2022-12-07 5:54 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-12-07 5:54 UTC (permalink / raw) To: Ming Lei Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty [-- Attachment #1: Type: text/plain, Size: 4809 bytes --] On Tue, Nov 29, 2022 at 05:14:28PM +0530, Nitesh Shetty wrote: > On Thu, Nov 24, 2022 at 08:03:56AM +0800, Ming Lei wrote: > > On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > > > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > > > and an array of (source, destination and copy length) tuples. > > > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > > > bio pair with a token as payload and submitted to the device in order. > > > > > Read request populates token with source specific information which > > > > > is then passed with write request. > > > > > This design is courtesy Mikulas Patocka's token based copy > > > > > > > > I thought this patchset is just for enabling copy command which is > > > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > > > still submits read/write bios for doing the copy. > > > > > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > > > and the framework has been there. > > > > > > > > > > Main goal was to enable copy command, but community suggested to add > > > copy emulation as well. > > > > > > blk_copy_offload - actually issues copy command in driver layer. > > > The way read/write BIOs are percieved is different for copy offload. > > > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > > > copy command. But we did missed it to add in other driver's, where they > > > might be treated as normal READ/WRITE. > > > > > > blk_copy_emulate - is used if we fail or if device doesn't support native > > > copy offload command. Here we do READ/WRITE. Using copy_file_range for > > > emulation might be possible, but we see 2 issues here. > > > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > > > can readily use it. But we found it had many dependecies from dm-layer. > > > So later dropped that idea. > > > > Is it just because dm-kcopyd supports async copy? If yes, I believe we > > can reply on io_uring for implementing async copy_file_range, which will > > be generic interface for async copy, and could get better perf. > > > > It supports both sync and async. But used only inside dm-layer. > Async version of copy_file_range can help, using io-uring can be helpful > for user , but in-kernel users can't use uring. > > > > 2. copy_file_range, for block device atleast we saw few check's which fail > > > it for raw block device. At this point I dont know much about the history of > > > why such check is present. > > > > Got it, but IMO the check in generic_copy_file_checks() can be > > relaxed to cover blkdev cause splice does support blkdev. > > > > Then your bdev offload copy work can be simplified into: > > > > 1) implement .copy_file_range for def_blk_fops, suppose it is > > blkdev_copy_file_range() > > > > 2) inside blkdev_copy_file_range() > > > > - if the bdev supports offload copy, just submit one bio to the device, > > and this will be converted to one pt req to device > > > > - otherwise, fallback to generic_copy_file_range() > > > Actually we sent initial version with single bio, but later community suggested two bio's is must for offload, main reasoning being dm-layer,Xcopy,copy across namespace compatibilty. > We will check the feasibilty and try to implement the scheme in next versions. > It would be helpful, if someone in community know's why such checks were > present ? We see copy_file_range accepts only regular file. Was it > designed only for regular files or can we extend it to regular block > device. > As you suggested we were able to integrate def_blk_ops and run with user application, but we see one main issue with this approach. Using blkdev_copy_file_range requires having 2 file descriptors, which is not possible for in kernel users such as fabrics/dm-kcopyd which has only bdev descriptors. Do you have any plumbing suggestions here ? > > > > > > > When I was researching pipe/splice code for supporting ublk zero copy[1], I > > > > have got idea for async copy_file_range(), such as: io uring based > > > > direct splice, user backed intermediate buffer, still zero copy, if these > > > > ideas are finally implemented, we could get super-fast generic offload copy, > > > > and bdev copy is really covered too. > > > > > > > > [1] https://lore.kernel.org/linux-block/20221103085004.1029763-1-ming.lei@redhat.com/ > > > > > > > > > > Seems interesting, We will take a look into this. > > > > BTW, that is probably one direction of ublk's async zero copy IO too. > > > > > > Thanks, > > Ming > > > > > > > Thanks, > Nitesh Thanks, Nitesh Shetty [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 02/10] block: Add copy offload support infrastructure 2022-12-07 5:54 ` [dm-devel] " Nitesh Shetty @ 2022-12-07 11:19 ` Ming Lei -1 siblings, 0 replies; 67+ messages in thread From: Ming Lei @ 2022-12-07 11:19 UTC (permalink / raw) To: Nitesh Shetty Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev On Wed, Dec 07, 2022 at 11:24:00AM +0530, Nitesh Shetty wrote: > On Tue, Nov 29, 2022 at 05:14:28PM +0530, Nitesh Shetty wrote: > > On Thu, Nov 24, 2022 at 08:03:56AM +0800, Ming Lei wrote: > > > On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > > > > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > > > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > > > > and an array of (source, destination and copy length) tuples. > > > > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > > > > bio pair with a token as payload and submitted to the device in order. > > > > > > Read request populates token with source specific information which > > > > > > is then passed with write request. > > > > > > This design is courtesy Mikulas Patocka's token based copy > > > > > > > > > > I thought this patchset is just for enabling copy command which is > > > > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > > > > still submits read/write bios for doing the copy. > > > > > > > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > > > > and the framework has been there. > > > > > > > > > > > > > Main goal was to enable copy command, but community suggested to add > > > > copy emulation as well. > > > > > > > > blk_copy_offload - actually issues copy command in driver layer. > > > > The way read/write BIOs are percieved is different for copy offload. > > > > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > > > > copy command. But we did missed it to add in other driver's, where they > > > > might be treated as normal READ/WRITE. > > > > > > > > blk_copy_emulate - is used if we fail or if device doesn't support native > > > > copy offload command. Here we do READ/WRITE. Using copy_file_range for > > > > emulation might be possible, but we see 2 issues here. > > > > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > > > > can readily use it. But we found it had many dependecies from dm-layer. > > > > So later dropped that idea. > > > > > > Is it just because dm-kcopyd supports async copy? If yes, I believe we > > > can reply on io_uring for implementing async copy_file_range, which will > > > be generic interface for async copy, and could get better perf. > > > > > > > It supports both sync and async. But used only inside dm-layer. > > Async version of copy_file_range can help, using io-uring can be helpful > > for user , but in-kernel users can't use uring. > > > > > > 2. copy_file_range, for block device atleast we saw few check's which fail > > > > it for raw block device. At this point I dont know much about the history of > > > > why such check is present. > > > > > > Got it, but IMO the check in generic_copy_file_checks() can be > > > relaxed to cover blkdev cause splice does support blkdev. > > > > > > Then your bdev offload copy work can be simplified into: > > > > > > 1) implement .copy_file_range for def_blk_fops, suppose it is > > > blkdev_copy_file_range() > > > > > > 2) inside blkdev_copy_file_range() > > > > > > - if the bdev supports offload copy, just submit one bio to the device, > > > and this will be converted to one pt req to device > > > > > > - otherwise, fallback to generic_copy_file_range() > > > > > > > Actually we sent initial version with single bio, but later community > suggested two bio's is must for offload, main reasoning being Is there any link which holds the discussion? > dm-layer,Xcopy,copy across namespace compatibilty. But dm kcopy has supported bdev copy already, so once your patch is ready, dm kcopy can just sends one bio with REQ_COPY if the device supports offload command, otherwise the current dm kcopy code can work as before. > > > We will check the feasibilty and try to implement the scheme in next versions. > > It would be helpful, if someone in community know's why such checks were > > present ? We see copy_file_range accepts only regular file. Was it > > designed only for regular files or can we extend it to regular block > > device. > > > > As you suggested we were able to integrate def_blk_ops and > run with user application, but we see one main issue with this approach. > Using blkdev_copy_file_range requires having 2 file descriptors, which > is not possible for in kernel users such as fabrics/dm-kcopyd which has > only bdev descriptors. > Do you have any plumbing suggestions here ? What is the fabrics kernel user? Any kernel target code(such as nvme target) has file/bdev path available, vfs_copy_file_range() should be fine. Also IMO, kernel copy user shouldn't be important long term, especially if io_uring copy_file_range() can be supported, forwarding to userspace not only gets better performance, but also cleanup kernel related copy code much. thanks, Ming ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 02/10] block: Add copy offload support infrastructure @ 2022-12-07 11:19 ` Ming Lei 0 siblings, 0 replies; 67+ messages in thread From: Ming Lei @ 2022-12-07 11:19 UTC (permalink / raw) To: Nitesh Shetty Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty On Wed, Dec 07, 2022 at 11:24:00AM +0530, Nitesh Shetty wrote: > On Tue, Nov 29, 2022 at 05:14:28PM +0530, Nitesh Shetty wrote: > > On Thu, Nov 24, 2022 at 08:03:56AM +0800, Ming Lei wrote: > > > On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > > > > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > > > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > > > > and an array of (source, destination and copy length) tuples. > > > > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > > > > bio pair with a token as payload and submitted to the device in order. > > > > > > Read request populates token with source specific information which > > > > > > is then passed with write request. > > > > > > This design is courtesy Mikulas Patocka's token based copy > > > > > > > > > > I thought this patchset is just for enabling copy command which is > > > > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > > > > still submits read/write bios for doing the copy. > > > > > > > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > > > > and the framework has been there. > > > > > > > > > > > > > Main goal was to enable copy command, but community suggested to add > > > > copy emulation as well. > > > > > > > > blk_copy_offload - actually issues copy command in driver layer. > > > > The way read/write BIOs are percieved is different for copy offload. > > > > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > > > > copy command. But we did missed it to add in other driver's, where they > > > > might be treated as normal READ/WRITE. > > > > > > > > blk_copy_emulate - is used if we fail or if device doesn't support native > > > > copy offload command. Here we do READ/WRITE. Using copy_file_range for > > > > emulation might be possible, but we see 2 issues here. > > > > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > > > > can readily use it. But we found it had many dependecies from dm-layer. > > > > So later dropped that idea. > > > > > > Is it just because dm-kcopyd supports async copy? If yes, I believe we > > > can reply on io_uring for implementing async copy_file_range, which will > > > be generic interface for async copy, and could get better perf. > > > > > > > It supports both sync and async. But used only inside dm-layer. > > Async version of copy_file_range can help, using io-uring can be helpful > > for user , but in-kernel users can't use uring. > > > > > > 2. copy_file_range, for block device atleast we saw few check's which fail > > > > it for raw block device. At this point I dont know much about the history of > > > > why such check is present. > > > > > > Got it, but IMO the check in generic_copy_file_checks() can be > > > relaxed to cover blkdev cause splice does support blkdev. > > > > > > Then your bdev offload copy work can be simplified into: > > > > > > 1) implement .copy_file_range for def_blk_fops, suppose it is > > > blkdev_copy_file_range() > > > > > > 2) inside blkdev_copy_file_range() > > > > > > - if the bdev supports offload copy, just submit one bio to the device, > > > and this will be converted to one pt req to device > > > > > > - otherwise, fallback to generic_copy_file_range() > > > > > > > Actually we sent initial version with single bio, but later community > suggested two bio's is must for offload, main reasoning being Is there any link which holds the discussion? > dm-layer,Xcopy,copy across namespace compatibilty. But dm kcopy has supported bdev copy already, so once your patch is ready, dm kcopy can just sends one bio with REQ_COPY if the device supports offload command, otherwise the current dm kcopy code can work as before. > > > We will check the feasibilty and try to implement the scheme in next versions. > > It would be helpful, if someone in community know's why such checks were > > present ? We see copy_file_range accepts only regular file. Was it > > designed only for regular files or can we extend it to regular block > > device. > > > > As you suggested we were able to integrate def_blk_ops and > run with user application, but we see one main issue with this approach. > Using blkdev_copy_file_range requires having 2 file descriptors, which > is not possible for in kernel users such as fabrics/dm-kcopyd which has > only bdev descriptors. > Do you have any plumbing suggestions here ? What is the fabrics kernel user? Any kernel target code(such as nvme target) has file/bdev path available, vfs_copy_file_range() should be fine. Also IMO, kernel copy user shouldn't be important long term, especially if io_uring copy_file_range() can be supported, forwarding to userspace not only gets better performance, but also cleanup kernel related copy code much. thanks, Ming -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 02/10] block: Add copy offload support infrastructure 2022-12-07 11:19 ` [dm-devel] " Ming Lei @ 2022-12-09 8:16 ` Nitesh Shetty -1 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-12-09 8:16 UTC (permalink / raw) To: Ming Lei Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev [-- Attachment #1: Type: text/plain, Size: 7285 bytes --] On Wed, Dec 07, 2022 at 07:19:00PM +0800, Ming Lei wrote: > On Wed, Dec 07, 2022 at 11:24:00AM +0530, Nitesh Shetty wrote: > > On Tue, Nov 29, 2022 at 05:14:28PM +0530, Nitesh Shetty wrote: > > > On Thu, Nov 24, 2022 at 08:03:56AM +0800, Ming Lei wrote: > > > > On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > > > > > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > > > > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > > > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > > > > > and an array of (source, destination and copy length) tuples. > > > > > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > > > > > bio pair with a token as payload and submitted to the device in order. > > > > > > > Read request populates token with source specific information which > > > > > > > is then passed with write request. > > > > > > > This design is courtesy Mikulas Patocka's token based copy > > > > > > > > > > > > I thought this patchset is just for enabling copy command which is > > > > > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > > > > > still submits read/write bios for doing the copy. > > > > > > > > > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > > > > > and the framework has been there. > > > > > > > > > > > > > > > > Main goal was to enable copy command, but community suggested to add > > > > > copy emulation as well. > > > > > > > > > > blk_copy_offload - actually issues copy command in driver layer. > > > > > The way read/write BIOs are percieved is different for copy offload. > > > > > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > > > > > copy command. But we did missed it to add in other driver's, where they > > > > > might be treated as normal READ/WRITE. > > > > > > > > > > blk_copy_emulate - is used if we fail or if device doesn't support native > > > > > copy offload command. Here we do READ/WRITE. Using copy_file_range for > > > > > emulation might be possible, but we see 2 issues here. > > > > > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > > > > > can readily use it. But we found it had many dependecies from dm-layer. > > > > > So later dropped that idea. > > > > > > > > Is it just because dm-kcopyd supports async copy? If yes, I believe we > > > > can reply on io_uring for implementing async copy_file_range, which will > > > > be generic interface for async copy, and could get better perf. > > > > > > > > > > It supports both sync and async. But used only inside dm-layer. > > > Async version of copy_file_range can help, using io-uring can be helpful > > > for user , but in-kernel users can't use uring. > > > > > > > > 2. copy_file_range, for block device atleast we saw few check's which fail > > > > > it for raw block device. At this point I dont know much about the history of > > > > > why such check is present. > > > > > > > > Got it, but IMO the check in generic_copy_file_checks() can be > > > > relaxed to cover blkdev cause splice does support blkdev. > > > > > > > > Then your bdev offload copy work can be simplified into: > > > > > > > > 1) implement .copy_file_range for def_blk_fops, suppose it is > > > > blkdev_copy_file_range() > > > > > > > > 2) inside blkdev_copy_file_range() > > > > > > > > - if the bdev supports offload copy, just submit one bio to the device, > > > > and this will be converted to one pt req to device > > > > > > > > - otherwise, fallback to generic_copy_file_range() > > > > > > > > > > > Actually we sent initial version with single bio, but later community > > suggested two bio's is must for offload, main reasoning being > > Is there any link which holds the discussion? > This[1] is the starting thread for LSF/MM which Chaitanya organized and it was a conference call. Also in 2022 LSM/MM there was a discussion on copy topic as well. One of the main conclusion was using 2 bio's as must have. Bart has summarized previous copy efforts[2] and Martin too [3], which might be of help in understanding why 2 bio's are must. > > dm-layer,Xcopy,copy across namespace compatibilty. > > But dm kcopy has supported bdev copy already, so once your patch is > ready, dm kcopy can just sends one bio with REQ_COPY if the device > supports offload command, otherwise the current dm kcopy code can work > as before. > > > > > > We will check the feasibilty and try to implement the scheme in next versions. > > > It would be helpful, if someone in community know's why such checks were > > > present ? We see copy_file_range accepts only regular file. Was it > > > designed only for regular files or can we extend it to regular block > > > device. > > > > > > > As you suggested we were able to integrate def_blk_ops and > > run with user application, but we see one main issue with this approach. > > Using blkdev_copy_file_range requires having 2 file descriptors, which > > is not possible for in kernel users such as fabrics/dm-kcopyd which has > > only bdev descriptors. > > Do you have any plumbing suggestions here ? > > What is the fabrics kernel user? In fabrics setup we are exposing target side NVMe device, to host as copy offload capable device, irrespective of target device's capability. This will enable sending copy offload command from host. From target side, if device doesn't support offload then we emulate. This way we will avoid data copy over the network. > Any kernel target code(such as nvme target) > has file/bdev path available, vfs_copy_file_range() should be fine. > From target side, fabrics device can be created in 2 ways, 1. file backed device: In this setup we get file descriptor. In fact in our patches[4] are using vfs_copy_file_range to offload copy. 2. block backed device: Here we have only blockdev descriptor. This setup we can't use vfs_copy_file_range since we are missing file descriptor. Your input on how we can plumb blkdev_copy_file_range with bdev would help. > Also IMO, kernel copy user shouldn't be important long term, especially if > io_uring copy_file_range() can be supported, forwarding to userspace not > only gets better performance, but also cleanup kernel related copy code > much. > Using uring is valid if consumer of copy_file_range is userspace. But there are many possible in-kernel user of copy, such as dm-kcopyd, garbage collection case such as F2FS GC, also fabrics as explained above. We can't use uring from these layers. Present implementation of vfs_copy_file_range(CFR) lacks a. async implementation, which helps in nvme over fabrics b. multi range(src,dst pair) support So here we see going to blkdev_copy_file_range actually regress our present result. But we do see a goodness of using mature vfs_copy_file_range for emulation. [1] https://lore.kernel.org/linux-nvme/BYAPR04MB49652C4B75E38F3716F3C06386539@BYAPR04MB4965.namprd04.prod.outlook.com/ [2] https://github.com/bvanassche/linux-kernel-copy-offload [3] https://oss.oracle.com/~mkp/docs/xcopy.pdf [4] https://lore.kernel.org/lkml/20221130041450.GA17533@test-zns/T/#Z2e.:..:20221123055827.26996-7-nj.shetty::40samsung.com:1drivers:nvme:target:io-cmd-file.c Thanks, Nitesh Shetty [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 02/10] block: Add copy offload support infrastructure @ 2022-12-09 8:16 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-12-09 8:16 UTC (permalink / raw) To: Ming Lei Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty [-- Attachment #1: Type: text/plain, Size: 7285 bytes --] On Wed, Dec 07, 2022 at 07:19:00PM +0800, Ming Lei wrote: > On Wed, Dec 07, 2022 at 11:24:00AM +0530, Nitesh Shetty wrote: > > On Tue, Nov 29, 2022 at 05:14:28PM +0530, Nitesh Shetty wrote: > > > On Thu, Nov 24, 2022 at 08:03:56AM +0800, Ming Lei wrote: > > > > On Wed, Nov 23, 2022 at 03:37:12PM +0530, Nitesh Shetty wrote: > > > > > On Wed, Nov 23, 2022 at 04:04:18PM +0800, Ming Lei wrote: > > > > > > On Wed, Nov 23, 2022 at 11:28:19AM +0530, Nitesh Shetty wrote: > > > > > > > Introduce blkdev_issue_copy which supports source and destination bdevs, > > > > > > > and an array of (source, destination and copy length) tuples. > > > > > > > Introduce REQ_COPY copy offload operation flag. Create a read-write > > > > > > > bio pair with a token as payload and submitted to the device in order. > > > > > > > Read request populates token with source specific information which > > > > > > > is then passed with write request. > > > > > > > This design is courtesy Mikulas Patocka's token based copy > > > > > > > > > > > > I thought this patchset is just for enabling copy command which is > > > > > > supported by hardware. But turns out it isn't, because blk_copy_offload() > > > > > > still submits read/write bios for doing the copy. > > > > > > > > > > > > I am just wondering why not let copy_file_range() cover this kind of copy, > > > > > > and the framework has been there. > > > > > > > > > > > > > > > > Main goal was to enable copy command, but community suggested to add > > > > > copy emulation as well. > > > > > > > > > > blk_copy_offload - actually issues copy command in driver layer. > > > > > The way read/write BIOs are percieved is different for copy offload. > > > > > In copy offload we check REQ_COPY flag in NVMe driver layer to issue > > > > > copy command. But we did missed it to add in other driver's, where they > > > > > might be treated as normal READ/WRITE. > > > > > > > > > > blk_copy_emulate - is used if we fail or if device doesn't support native > > > > > copy offload command. Here we do READ/WRITE. Using copy_file_range for > > > > > emulation might be possible, but we see 2 issues here. > > > > > 1. We explored possibility of pulling dm-kcopyd to block layer so that we > > > > > can readily use it. But we found it had many dependecies from dm-layer. > > > > > So later dropped that idea. > > > > > > > > Is it just because dm-kcopyd supports async copy? If yes, I believe we > > > > can reply on io_uring for implementing async copy_file_range, which will > > > > be generic interface for async copy, and could get better perf. > > > > > > > > > > It supports both sync and async. But used only inside dm-layer. > > > Async version of copy_file_range can help, using io-uring can be helpful > > > for user , but in-kernel users can't use uring. > > > > > > > > 2. copy_file_range, for block device atleast we saw few check's which fail > > > > > it for raw block device. At this point I dont know much about the history of > > > > > why such check is present. > > > > > > > > Got it, but IMO the check in generic_copy_file_checks() can be > > > > relaxed to cover blkdev cause splice does support blkdev. > > > > > > > > Then your bdev offload copy work can be simplified into: > > > > > > > > 1) implement .copy_file_range for def_blk_fops, suppose it is > > > > blkdev_copy_file_range() > > > > > > > > 2) inside blkdev_copy_file_range() > > > > > > > > - if the bdev supports offload copy, just submit one bio to the device, > > > > and this will be converted to one pt req to device > > > > > > > > - otherwise, fallback to generic_copy_file_range() > > > > > > > > > > > Actually we sent initial version with single bio, but later community > > suggested two bio's is must for offload, main reasoning being > > Is there any link which holds the discussion? > This[1] is the starting thread for LSF/MM which Chaitanya organized and it was a conference call. Also in 2022 LSM/MM there was a discussion on copy topic as well. One of the main conclusion was using 2 bio's as must have. Bart has summarized previous copy efforts[2] and Martin too [3], which might be of help in understanding why 2 bio's are must. > > dm-layer,Xcopy,copy across namespace compatibilty. > > But dm kcopy has supported bdev copy already, so once your patch is > ready, dm kcopy can just sends one bio with REQ_COPY if the device > supports offload command, otherwise the current dm kcopy code can work > as before. > > > > > > We will check the feasibilty and try to implement the scheme in next versions. > > > It would be helpful, if someone in community know's why such checks were > > > present ? We see copy_file_range accepts only regular file. Was it > > > designed only for regular files or can we extend it to regular block > > > device. > > > > > > > As you suggested we were able to integrate def_blk_ops and > > run with user application, but we see one main issue with this approach. > > Using blkdev_copy_file_range requires having 2 file descriptors, which > > is not possible for in kernel users such as fabrics/dm-kcopyd which has > > only bdev descriptors. > > Do you have any plumbing suggestions here ? > > What is the fabrics kernel user? In fabrics setup we are exposing target side NVMe device, to host as copy offload capable device, irrespective of target device's capability. This will enable sending copy offload command from host. From target side, if device doesn't support offload then we emulate. This way we will avoid data copy over the network. > Any kernel target code(such as nvme target) > has file/bdev path available, vfs_copy_file_range() should be fine. > From target side, fabrics device can be created in 2 ways, 1. file backed device: In this setup we get file descriptor. In fact in our patches[4] are using vfs_copy_file_range to offload copy. 2. block backed device: Here we have only blockdev descriptor. This setup we can't use vfs_copy_file_range since we are missing file descriptor. Your input on how we can plumb blkdev_copy_file_range with bdev would help. > Also IMO, kernel copy user shouldn't be important long term, especially if > io_uring copy_file_range() can be supported, forwarding to userspace not > only gets better performance, but also cleanup kernel related copy code > much. > Using uring is valid if consumer of copy_file_range is userspace. But there are many possible in-kernel user of copy, such as dm-kcopyd, garbage collection case such as F2FS GC, also fabrics as explained above. We can't use uring from these layers. Present implementation of vfs_copy_file_range(CFR) lacks a. async implementation, which helps in nvme over fabrics b. multi range(src,dst pair) support So here we see going to blkdev_copy_file_range actually regress our present result. But we do see a goodness of using mature vfs_copy_file_range for emulation. [1] https://lore.kernel.org/linux-nvme/BYAPR04MB49652C4B75E38F3716F3C06386539@BYAPR04MB4965.namprd04.prod.outlook.com/ [2] https://github.com/bvanassche/linux-kernel-copy-offload [3] https://oss.oracle.com/~mkp/docs/xcopy.pdf [4] https://lore.kernel.org/lkml/20221130041450.GA17533@test-zns/T/#Z2e.:..:20221123055827.26996-7-nj.shetty::40samsung.com:1drivers:nvme:target:io-cmd-file.c Thanks, Nitesh Shetty [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061021epcas5p276b6d48db889932282d017b27c9a3291@epcas5p2.samsung.com>]
* [PATCH v5 03/10] block: add emulation for copy [not found] ` <CGME20221123061021epcas5p276b6d48db889932282d017b27c9a3291@epcas5p2.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty, Vincent Fu For the devices which does not support copy, copy emulation is added. Copy-emulation is implemented by reading from source ranges into memory and writing to the corresponding destination asynchronously. For zoned device we maintain a linked list of read submission and try to submit corresponding write in same order. Also emulation is used, if copy offload fails or partially completes. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Vincent Fu <vincent.fu@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- block/blk-lib.c | 241 ++++++++++++++++++++++++++++++++++++++++- block/blk-map.c | 4 +- include/linux/blkdev.h | 3 + 3 files changed, 245 insertions(+), 3 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index 2ce3c872ca49..43b1d0ef5732 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -428,6 +428,239 @@ static inline int blk_copy_sanity_check(struct block_device *src_bdev, return 0; } +static void *blk_alloc_buf(sector_t req_size, sector_t *alloc_size, + gfp_t gfp_mask) +{ + int min_size = PAGE_SIZE; + void *buf; + + while (req_size >= min_size) { + buf = kvmalloc(req_size, gfp_mask); + if (buf) { + *alloc_size = req_size; + return buf; + } + /* retry half the requested size */ + req_size >>= 1; + } + + return NULL; +} + +static void blk_copy_emulate_write_end_io(struct bio *bio) +{ + struct copy_ctx *ctx = bio->bi_private; + struct cio *cio = ctx->cio; + sector_t clen; + int ri = ctx->range_idx; + + if (bio->bi_status) { + cio->io_err = blk_status_to_errno(bio->bi_status); + clen = (bio->bi_iter.bi_sector << SECTOR_SHIFT) - + cio->ranges[ri].dst; + cio->ranges[ri].comp_len = min_t(sector_t, clen, + cio->ranges[ri].comp_len); + } + kvfree(page_address(bio->bi_io_vec[0].bv_page)); + bio_map_kern_endio(bio); + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + if (atomic_dec_and_test(&cio->refcount)) { + if (cio->endio) { + cio->endio(cio->private, cio->io_err); + kfree(cio); + } else + blk_wake_io_task(cio->waiter); + } +} + +static void blk_copy_emulate_read_end_io(struct bio *read_bio) +{ + struct copy_ctx *ctx = read_bio->bi_private; + struct cio *cio = ctx->cio; + sector_t clen; + int ri = ctx->range_idx; + unsigned long flags; + + if (read_bio->bi_status) { + cio->io_err = blk_status_to_errno(read_bio->bi_status); + goto err_rw_bio; + } + + /* For zoned device, we check if completed bio is first entry in linked + * list, + * if yes, we start the worker to submit write bios. + * if not, then we just update status of bio in ctx, + * once the worker gets scheduled, it will submit writes for all + * the consecutive REQ_COPY_READ_COMPLETE bios. + */ + if (bdev_is_zoned(ctx->write_bio->bi_bdev)) { + spin_lock_irqsave(&cio->list_lock, flags); + ctx->status = REQ_COPY_READ_COMPLETE; + if (ctx == list_first_entry(&cio->list, + struct copy_ctx, list)) { + spin_unlock_irqrestore(&cio->list_lock, flags); + schedule_work(&ctx->dispatch_work); + goto free_read_bio; + } + spin_unlock_irqrestore(&cio->list_lock, flags); + } else + schedule_work(&ctx->dispatch_work); + +free_read_bio: + kfree(read_bio); + + return; + +err_rw_bio: + clen = (read_bio->bi_iter.bi_sector << SECTOR_SHIFT) - + cio->ranges[ri].src; + cio->ranges[ri].comp_len = min_t(sector_t, clen, + cio->ranges[ri].comp_len); + __free_page(read_bio->bi_io_vec[0].bv_page); + bio_map_kern_endio(read_bio); + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + if (atomic_dec_and_test(&cio->refcount)) { + if (cio->endio) { + cio->endio(cio->private, cio->io_err); + kfree(cio); + } else + blk_wake_io_task(cio->waiter); + } +} + +/* + * If native copy offload feature is absent, this function tries to emulate, + * by copying data from source to a temporary buffer and from buffer to + * destination device. + */ +static int blk_copy_emulate(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, + int nr, cio_iodone_t end_io, void *private, gfp_t gfp_mask) +{ + struct request_queue *sq = bdev_get_queue(src_bdev); + struct request_queue *dq = bdev_get_queue(dst_bdev); + struct bio *read_bio, *write_bio; + void *buf = NULL; + struct copy_ctx *ctx; + struct cio *cio; + sector_t src, dst, offset, buf_len, req_len, rem = 0; + int ri = 0, ret = 0; + unsigned long flags; + sector_t max_src_hw_len = min_t(unsigned int, queue_max_hw_sectors(sq), + queue_max_segments(sq) << (PAGE_SHIFT - SECTOR_SHIFT)) + << SECTOR_SHIFT; + sector_t max_dst_hw_len = min_t(unsigned int, queue_max_hw_sectors(dq), + queue_max_segments(dq) << (PAGE_SHIFT - SECTOR_SHIFT)) + << SECTOR_SHIFT; + sector_t max_hw_len = min_t(unsigned int, + max_src_hw_len, max_dst_hw_len); + + cio = kzalloc(sizeof(struct cio), GFP_KERNEL); + if (!cio) + return -ENOMEM; + cio->ranges = ranges; + atomic_set(&cio->refcount, 1); + cio->waiter = current; + cio->endio = end_io; + cio->private = private; + + if (bdev_is_zoned(dst_bdev)) { + INIT_LIST_HEAD(&cio->list); + spin_lock_init(&cio->list_lock); + } + + for (ri = 0; ri < nr; ri++) { + offset = ranges[ri].comp_len; + src = ranges[ri].src + offset; + dst = ranges[ri].dst + offset; + /* If IO fails, we truncate comp_len */ + ranges[ri].comp_len = ranges[ri].len; + + for (rem = ranges[ri].len - offset; rem > 0; rem -= buf_len) { + req_len = min_t(int, max_hw_len, rem); + + buf = blk_alloc_buf(req_len, &buf_len, gfp_mask); + if (!buf) { + ret = -ENOMEM; + goto err_alloc_buf; + } + + ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask); + if (!ctx) { + ret = -ENOMEM; + goto err_ctx; + } + + read_bio = bio_map_kern(sq, buf, buf_len, gfp_mask); + if (IS_ERR(read_bio)) { + ret = PTR_ERR(read_bio); + goto err_read_bio; + } + + write_bio = bio_map_kern(dq, buf, buf_len, gfp_mask); + if (IS_ERR(write_bio)) { + ret = PTR_ERR(write_bio); + goto err_write_bio; + } + + ctx->cio = cio; + ctx->range_idx = ri; + ctx->write_bio = write_bio; + atomic_set(&ctx->refcount, 1); + + read_bio->bi_iter.bi_sector = src >> SECTOR_SHIFT; + read_bio->bi_iter.bi_size = buf_len; + read_bio->bi_opf = REQ_OP_READ | REQ_SYNC; + bio_set_dev(read_bio, src_bdev); + read_bio->bi_end_io = blk_copy_emulate_read_end_io; + read_bio->bi_private = ctx; + + write_bio->bi_iter.bi_size = buf_len; + write_bio->bi_opf = REQ_OP_WRITE | REQ_SYNC; + bio_set_dev(write_bio, dst_bdev); + write_bio->bi_end_io = blk_copy_emulate_write_end_io; + write_bio->bi_iter.bi_sector = dst >> SECTOR_SHIFT; + write_bio->bi_private = ctx; + + if (bdev_is_zoned(dst_bdev)) { + INIT_WORK(&ctx->dispatch_work, + blk_zoned_copy_dispatch_work_fn); + INIT_LIST_HEAD(&ctx->list); + spin_lock_irqsave(&cio->list_lock, flags); + ctx->status = REQ_COPY_READ_PROGRESS; + list_add_tail(&ctx->list, &cio->list); + spin_unlock_irqrestore(&cio->list_lock, flags); + } else + INIT_WORK(&ctx->dispatch_work, + blk_copy_dispatch_work_fn); + + atomic_inc(&cio->refcount); + submit_bio(read_bio); + + src += buf_len; + dst += buf_len; + } + } + + /* Wait for completion of all IO's*/ + return cio_await_completion(cio); + +err_write_bio: + bio_put(read_bio); +err_read_bio: + kfree(ctx); +err_ctx: + kvfree(buf); +err_alloc_buf: + ranges[ri].comp_len -= min_t(sector_t, + ranges[ri].comp_len, (ranges[ri].len - rem)); + + cio->io_err = ret; + return cio_await_completion(cio); +} + static inline bool blk_check_copy_offload(struct request_queue *src_q, struct request_queue *dst_q) { @@ -460,15 +693,21 @@ int blkdev_issue_copy(struct block_device *src_bdev, struct request_queue *src_q = bdev_get_queue(src_bdev); struct request_queue *dst_q = bdev_get_queue(dst_bdev); int ret = -EINVAL; + bool offload = false; ret = blk_copy_sanity_check(src_bdev, dst_bdev, ranges, nr); if (ret) return ret; - if (blk_check_copy_offload(src_q, dst_q)) + offload = blk_check_copy_offload(src_q, dst_q); + if (offload) ret = blk_copy_offload(src_bdev, dst_bdev, ranges, nr, end_io, private, gfp_mask); + if (ret || !offload) + ret = blk_copy_emulate(src_bdev, dst_bdev, ranges, nr, + end_io, private, gfp_mask); + return ret; } EXPORT_SYMBOL_GPL(blkdev_issue_copy); diff --git a/block/blk-map.c b/block/blk-map.c index 19940c978c73..bcf8db2b75f1 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -363,7 +363,7 @@ static void bio_invalidate_vmalloc_pages(struct bio *bio) #endif } -static void bio_map_kern_endio(struct bio *bio) +void bio_map_kern_endio(struct bio *bio) { bio_invalidate_vmalloc_pages(bio); bio_uninit(bio); @@ -380,7 +380,7 @@ static void bio_map_kern_endio(struct bio *bio) * Map the kernel address into a bio suitable for io to a block * device. Returns an error pointer in case of error. */ -static struct bio *bio_map_kern(struct request_queue *q, void *data, +struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len, gfp_t gfp_mask) { unsigned long kaddr = (unsigned long)data; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a3b12ad42ed7..b0b18c30a60b 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1068,6 +1068,9 @@ int blkdev_issue_secure_erase(struct block_device *bdev, sector_t sector, int blkdev_issue_copy(struct block_device *src_bdev, struct block_device *dst_bdev, struct range_entry *ranges, int nr, cio_iodone_t end_io, void *private, gfp_t gfp_mask); +struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len, + gfp_t gfp_mask); +void bio_map_kern_endio(struct bio *bio); #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */ #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */ -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 03/10] block: add emulation for copy @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, Vincent Fu, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, nitheshshetty For the devices which does not support copy, copy emulation is added. Copy-emulation is implemented by reading from source ranges into memory and writing to the corresponding destination asynchronously. For zoned device we maintain a linked list of read submission and try to submit corresponding write in same order. Also emulation is used, if copy offload fails or partially completes. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Vincent Fu <vincent.fu@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- block/blk-lib.c | 241 ++++++++++++++++++++++++++++++++++++++++- block/blk-map.c | 4 +- include/linux/blkdev.h | 3 + 3 files changed, 245 insertions(+), 3 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index 2ce3c872ca49..43b1d0ef5732 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -428,6 +428,239 @@ static inline int blk_copy_sanity_check(struct block_device *src_bdev, return 0; } +static void *blk_alloc_buf(sector_t req_size, sector_t *alloc_size, + gfp_t gfp_mask) +{ + int min_size = PAGE_SIZE; + void *buf; + + while (req_size >= min_size) { + buf = kvmalloc(req_size, gfp_mask); + if (buf) { + *alloc_size = req_size; + return buf; + } + /* retry half the requested size */ + req_size >>= 1; + } + + return NULL; +} + +static void blk_copy_emulate_write_end_io(struct bio *bio) +{ + struct copy_ctx *ctx = bio->bi_private; + struct cio *cio = ctx->cio; + sector_t clen; + int ri = ctx->range_idx; + + if (bio->bi_status) { + cio->io_err = blk_status_to_errno(bio->bi_status); + clen = (bio->bi_iter.bi_sector << SECTOR_SHIFT) - + cio->ranges[ri].dst; + cio->ranges[ri].comp_len = min_t(sector_t, clen, + cio->ranges[ri].comp_len); + } + kvfree(page_address(bio->bi_io_vec[0].bv_page)); + bio_map_kern_endio(bio); + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + if (atomic_dec_and_test(&cio->refcount)) { + if (cio->endio) { + cio->endio(cio->private, cio->io_err); + kfree(cio); + } else + blk_wake_io_task(cio->waiter); + } +} + +static void blk_copy_emulate_read_end_io(struct bio *read_bio) +{ + struct copy_ctx *ctx = read_bio->bi_private; + struct cio *cio = ctx->cio; + sector_t clen; + int ri = ctx->range_idx; + unsigned long flags; + + if (read_bio->bi_status) { + cio->io_err = blk_status_to_errno(read_bio->bi_status); + goto err_rw_bio; + } + + /* For zoned device, we check if completed bio is first entry in linked + * list, + * if yes, we start the worker to submit write bios. + * if not, then we just update status of bio in ctx, + * once the worker gets scheduled, it will submit writes for all + * the consecutive REQ_COPY_READ_COMPLETE bios. + */ + if (bdev_is_zoned(ctx->write_bio->bi_bdev)) { + spin_lock_irqsave(&cio->list_lock, flags); + ctx->status = REQ_COPY_READ_COMPLETE; + if (ctx == list_first_entry(&cio->list, + struct copy_ctx, list)) { + spin_unlock_irqrestore(&cio->list_lock, flags); + schedule_work(&ctx->dispatch_work); + goto free_read_bio; + } + spin_unlock_irqrestore(&cio->list_lock, flags); + } else + schedule_work(&ctx->dispatch_work); + +free_read_bio: + kfree(read_bio); + + return; + +err_rw_bio: + clen = (read_bio->bi_iter.bi_sector << SECTOR_SHIFT) - + cio->ranges[ri].src; + cio->ranges[ri].comp_len = min_t(sector_t, clen, + cio->ranges[ri].comp_len); + __free_page(read_bio->bi_io_vec[0].bv_page); + bio_map_kern_endio(read_bio); + if (atomic_dec_and_test(&ctx->refcount)) + kfree(ctx); + if (atomic_dec_and_test(&cio->refcount)) { + if (cio->endio) { + cio->endio(cio->private, cio->io_err); + kfree(cio); + } else + blk_wake_io_task(cio->waiter); + } +} + +/* + * If native copy offload feature is absent, this function tries to emulate, + * by copying data from source to a temporary buffer and from buffer to + * destination device. + */ +static int blk_copy_emulate(struct block_device *src_bdev, + struct block_device *dst_bdev, struct range_entry *ranges, + int nr, cio_iodone_t end_io, void *private, gfp_t gfp_mask) +{ + struct request_queue *sq = bdev_get_queue(src_bdev); + struct request_queue *dq = bdev_get_queue(dst_bdev); + struct bio *read_bio, *write_bio; + void *buf = NULL; + struct copy_ctx *ctx; + struct cio *cio; + sector_t src, dst, offset, buf_len, req_len, rem = 0; + int ri = 0, ret = 0; + unsigned long flags; + sector_t max_src_hw_len = min_t(unsigned int, queue_max_hw_sectors(sq), + queue_max_segments(sq) << (PAGE_SHIFT - SECTOR_SHIFT)) + << SECTOR_SHIFT; + sector_t max_dst_hw_len = min_t(unsigned int, queue_max_hw_sectors(dq), + queue_max_segments(dq) << (PAGE_SHIFT - SECTOR_SHIFT)) + << SECTOR_SHIFT; + sector_t max_hw_len = min_t(unsigned int, + max_src_hw_len, max_dst_hw_len); + + cio = kzalloc(sizeof(struct cio), GFP_KERNEL); + if (!cio) + return -ENOMEM; + cio->ranges = ranges; + atomic_set(&cio->refcount, 1); + cio->waiter = current; + cio->endio = end_io; + cio->private = private; + + if (bdev_is_zoned(dst_bdev)) { + INIT_LIST_HEAD(&cio->list); + spin_lock_init(&cio->list_lock); + } + + for (ri = 0; ri < nr; ri++) { + offset = ranges[ri].comp_len; + src = ranges[ri].src + offset; + dst = ranges[ri].dst + offset; + /* If IO fails, we truncate comp_len */ + ranges[ri].comp_len = ranges[ri].len; + + for (rem = ranges[ri].len - offset; rem > 0; rem -= buf_len) { + req_len = min_t(int, max_hw_len, rem); + + buf = blk_alloc_buf(req_len, &buf_len, gfp_mask); + if (!buf) { + ret = -ENOMEM; + goto err_alloc_buf; + } + + ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask); + if (!ctx) { + ret = -ENOMEM; + goto err_ctx; + } + + read_bio = bio_map_kern(sq, buf, buf_len, gfp_mask); + if (IS_ERR(read_bio)) { + ret = PTR_ERR(read_bio); + goto err_read_bio; + } + + write_bio = bio_map_kern(dq, buf, buf_len, gfp_mask); + if (IS_ERR(write_bio)) { + ret = PTR_ERR(write_bio); + goto err_write_bio; + } + + ctx->cio = cio; + ctx->range_idx = ri; + ctx->write_bio = write_bio; + atomic_set(&ctx->refcount, 1); + + read_bio->bi_iter.bi_sector = src >> SECTOR_SHIFT; + read_bio->bi_iter.bi_size = buf_len; + read_bio->bi_opf = REQ_OP_READ | REQ_SYNC; + bio_set_dev(read_bio, src_bdev); + read_bio->bi_end_io = blk_copy_emulate_read_end_io; + read_bio->bi_private = ctx; + + write_bio->bi_iter.bi_size = buf_len; + write_bio->bi_opf = REQ_OP_WRITE | REQ_SYNC; + bio_set_dev(write_bio, dst_bdev); + write_bio->bi_end_io = blk_copy_emulate_write_end_io; + write_bio->bi_iter.bi_sector = dst >> SECTOR_SHIFT; + write_bio->bi_private = ctx; + + if (bdev_is_zoned(dst_bdev)) { + INIT_WORK(&ctx->dispatch_work, + blk_zoned_copy_dispatch_work_fn); + INIT_LIST_HEAD(&ctx->list); + spin_lock_irqsave(&cio->list_lock, flags); + ctx->status = REQ_COPY_READ_PROGRESS; + list_add_tail(&ctx->list, &cio->list); + spin_unlock_irqrestore(&cio->list_lock, flags); + } else + INIT_WORK(&ctx->dispatch_work, + blk_copy_dispatch_work_fn); + + atomic_inc(&cio->refcount); + submit_bio(read_bio); + + src += buf_len; + dst += buf_len; + } + } + + /* Wait for completion of all IO's*/ + return cio_await_completion(cio); + +err_write_bio: + bio_put(read_bio); +err_read_bio: + kfree(ctx); +err_ctx: + kvfree(buf); +err_alloc_buf: + ranges[ri].comp_len -= min_t(sector_t, + ranges[ri].comp_len, (ranges[ri].len - rem)); + + cio->io_err = ret; + return cio_await_completion(cio); +} + static inline bool blk_check_copy_offload(struct request_queue *src_q, struct request_queue *dst_q) { @@ -460,15 +693,21 @@ int blkdev_issue_copy(struct block_device *src_bdev, struct request_queue *src_q = bdev_get_queue(src_bdev); struct request_queue *dst_q = bdev_get_queue(dst_bdev); int ret = -EINVAL; + bool offload = false; ret = blk_copy_sanity_check(src_bdev, dst_bdev, ranges, nr); if (ret) return ret; - if (blk_check_copy_offload(src_q, dst_q)) + offload = blk_check_copy_offload(src_q, dst_q); + if (offload) ret = blk_copy_offload(src_bdev, dst_bdev, ranges, nr, end_io, private, gfp_mask); + if (ret || !offload) + ret = blk_copy_emulate(src_bdev, dst_bdev, ranges, nr, + end_io, private, gfp_mask); + return ret; } EXPORT_SYMBOL_GPL(blkdev_issue_copy); diff --git a/block/blk-map.c b/block/blk-map.c index 19940c978c73..bcf8db2b75f1 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -363,7 +363,7 @@ static void bio_invalidate_vmalloc_pages(struct bio *bio) #endif } -static void bio_map_kern_endio(struct bio *bio) +void bio_map_kern_endio(struct bio *bio) { bio_invalidate_vmalloc_pages(bio); bio_uninit(bio); @@ -380,7 +380,7 @@ static void bio_map_kern_endio(struct bio *bio) * Map the kernel address into a bio suitable for io to a block * device. Returns an error pointer in case of error. */ -static struct bio *bio_map_kern(struct request_queue *q, void *data, +struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len, gfp_t gfp_mask) { unsigned long kaddr = (unsigned long)data; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a3b12ad42ed7..b0b18c30a60b 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1068,6 +1068,9 @@ int blkdev_issue_secure_erase(struct block_device *bdev, sector_t sector, int blkdev_issue_copy(struct block_device *src_bdev, struct block_device *dst_bdev, struct range_entry *ranges, int nr, cio_iodone_t end_io, void *private, gfp_t gfp_mask); +struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len, + gfp_t gfp_mask); +void bio_map_kern_endio(struct bio *bio); #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */ #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */ -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061024epcas5p28fd0296018950d722b5a97e2875cf391@epcas5p2.samsung.com>]
* [PATCH v5 04/10] block: Introduce a new ioctl for copy [not found] ` <CGME20221123061024epcas5p28fd0296018950d722b5a97e2875cf391@epcas5p2.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty, Hannes Reinecke, Javier González Add new BLKCOPY ioctl that offloads copying of one or more sources ranges to one or more destination in a device. COPY ioctl accepts a 'copy_range' structure that contains no of range, a reserved field , followed by an array of ranges. Each source range is represented by 'range_entry' that contains source start offset, destination start offset and length of source ranges (in bytes) MAX_COPY_NR_RANGE, limits the number of entries for the IOCTL and MAX_COPY_TOTAL_LENGTH limits the total copy length, IOCTL can handle. Example code, to issue BLKCOPY: /* Sample example to copy three entries with [dest,src,len], * [32768, 0, 4096] [36864, 4096, 4096] [40960,8192,4096] on same device */ int main(void) { int i, ret, fd; unsigned long src = 0, dst = 32768, len = 4096; struct copy_range *cr; cr = (struct copy_range *)malloc(sizeof(*cr)+ (sizeof(struct range_entry)*3)); cr->nr_range = 3; cr->reserved = 0; for (i = 0; i< cr->nr_range; i++, src += len, dst += len) { cr->ranges[i].dst = dst; cr->ranges[i].src = src; cr->ranges[i].len = len; cr->ranges[i].comp_len = 0; } fd = open("/dev/nvme0n1", O_RDWR); if (fd < 0) return 1; ret = ioctl(fd, BLKCOPY, cr); if (ret != 0) printf("copy failed, ret= %d\n", ret); for (i=0; i< cr->nr_range; i++) if (cr->ranges[i].len != cr->ranges[i].comp_len) printf("Partial copy for entry %d: requested %llu, completed %llu\n", i, cr->ranges[i].len, cr->ranges[i].comp_len); close(fd); free(cr); return ret; } Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Javier González <javier.gonz@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- block/ioctl.c | 36 ++++++++++++++++++++++++++++++++++++ include/uapi/linux/fs.h | 9 +++++++++ 2 files changed, 45 insertions(+) diff --git a/block/ioctl.c b/block/ioctl.c index 60121e89052b..7daf76199161 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -120,6 +120,40 @@ static int blk_ioctl_discard(struct block_device *bdev, fmode_t mode, return err; } +static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode, + unsigned long arg) +{ + struct copy_range ucopy_range, *kcopy_range = NULL; + size_t payload_size = 0; + int ret; + + if (!(mode & FMODE_WRITE)) + return -EBADF; + + if (copy_from_user(&ucopy_range, (void __user *)arg, + sizeof(ucopy_range))) + return -EFAULT; + + if (unlikely(!ucopy_range.nr_range || ucopy_range.reserved || + ucopy_range.nr_range >= MAX_COPY_NR_RANGE)) + return -EINVAL; + + payload_size = (ucopy_range.nr_range * sizeof(struct range_entry)) + + sizeof(ucopy_range); + + kcopy_range = memdup_user((void __user *)arg, payload_size); + if (IS_ERR(kcopy_range)) + return PTR_ERR(kcopy_range); + + ret = blkdev_issue_copy(bdev, bdev, kcopy_range->ranges, + kcopy_range->nr_range, NULL, NULL, GFP_KERNEL); + if (copy_to_user((void __user *)arg, kcopy_range, payload_size)) + ret = -EFAULT; + + kfree(kcopy_range); + return ret; +} + static int blk_ioctl_secure_erase(struct block_device *bdev, fmode_t mode, void __user *argp) { @@ -481,6 +515,8 @@ static int blkdev_common_ioctl(struct block_device *bdev, fmode_t mode, return blk_ioctl_discard(bdev, mode, arg); case BLKSECDISCARD: return blk_ioctl_secure_erase(bdev, mode, argp); + case BLKCOPY: + return blk_ioctl_copy(bdev, mode, arg); case BLKZEROOUT: return blk_ioctl_zeroout(bdev, mode, arg); case BLKGETDISKSEQ: diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 9248b6d259de..8af10b926a6f 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -82,6 +82,14 @@ struct range_entry { __u64 comp_len; }; +struct copy_range { + __u64 nr_range; + __u64 reserved; + + /* Ranges always must be at the end */ + struct range_entry ranges[]; +}; + /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */ #define FILE_DEDUPE_RANGE_SAME 0 #define FILE_DEDUPE_RANGE_DIFFERS 1 @@ -203,6 +211,7 @@ struct fsxattr { #define BLKROTATIONAL _IO(0x12,126) #define BLKZEROOUT _IO(0x12,127) #define BLKGETDISKSEQ _IOR(0x12,128,__u64) +#define BLKCOPY _IOWR(0x12, 129, struct copy_range) /* * A jump here: 130-136 are reserved for zoned block devices * (see uapi/linux/blkzoned.h) -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 04/10] block: Introduce a new ioctl for copy @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, Javier González, nitheshshetty Add new BLKCOPY ioctl that offloads copying of one or more sources ranges to one or more destination in a device. COPY ioctl accepts a 'copy_range' structure that contains no of range, a reserved field , followed by an array of ranges. Each source range is represented by 'range_entry' that contains source start offset, destination start offset and length of source ranges (in bytes) MAX_COPY_NR_RANGE, limits the number of entries for the IOCTL and MAX_COPY_TOTAL_LENGTH limits the total copy length, IOCTL can handle. Example code, to issue BLKCOPY: /* Sample example to copy three entries with [dest,src,len], * [32768, 0, 4096] [36864, 4096, 4096] [40960,8192,4096] on same device */ int main(void) { int i, ret, fd; unsigned long src = 0, dst = 32768, len = 4096; struct copy_range *cr; cr = (struct copy_range *)malloc(sizeof(*cr)+ (sizeof(struct range_entry)*3)); cr->nr_range = 3; cr->reserved = 0; for (i = 0; i< cr->nr_range; i++, src += len, dst += len) { cr->ranges[i].dst = dst; cr->ranges[i].src = src; cr->ranges[i].len = len; cr->ranges[i].comp_len = 0; } fd = open("/dev/nvme0n1", O_RDWR); if (fd < 0) return 1; ret = ioctl(fd, BLKCOPY, cr); if (ret != 0) printf("copy failed, ret= %d\n", ret); for (i=0; i< cr->nr_range; i++) if (cr->ranges[i].len != cr->ranges[i].comp_len) printf("Partial copy for entry %d: requested %llu, completed %llu\n", i, cr->ranges[i].len, cr->ranges[i].comp_len); close(fd); free(cr); return ret; } Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Javier González <javier.gonz@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- block/ioctl.c | 36 ++++++++++++++++++++++++++++++++++++ include/uapi/linux/fs.h | 9 +++++++++ 2 files changed, 45 insertions(+) diff --git a/block/ioctl.c b/block/ioctl.c index 60121e89052b..7daf76199161 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -120,6 +120,40 @@ static int blk_ioctl_discard(struct block_device *bdev, fmode_t mode, return err; } +static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode, + unsigned long arg) +{ + struct copy_range ucopy_range, *kcopy_range = NULL; + size_t payload_size = 0; + int ret; + + if (!(mode & FMODE_WRITE)) + return -EBADF; + + if (copy_from_user(&ucopy_range, (void __user *)arg, + sizeof(ucopy_range))) + return -EFAULT; + + if (unlikely(!ucopy_range.nr_range || ucopy_range.reserved || + ucopy_range.nr_range >= MAX_COPY_NR_RANGE)) + return -EINVAL; + + payload_size = (ucopy_range.nr_range * sizeof(struct range_entry)) + + sizeof(ucopy_range); + + kcopy_range = memdup_user((void __user *)arg, payload_size); + if (IS_ERR(kcopy_range)) + return PTR_ERR(kcopy_range); + + ret = blkdev_issue_copy(bdev, bdev, kcopy_range->ranges, + kcopy_range->nr_range, NULL, NULL, GFP_KERNEL); + if (copy_to_user((void __user *)arg, kcopy_range, payload_size)) + ret = -EFAULT; + + kfree(kcopy_range); + return ret; +} + static int blk_ioctl_secure_erase(struct block_device *bdev, fmode_t mode, void __user *argp) { @@ -481,6 +515,8 @@ static int blkdev_common_ioctl(struct block_device *bdev, fmode_t mode, return blk_ioctl_discard(bdev, mode, arg); case BLKSECDISCARD: return blk_ioctl_secure_erase(bdev, mode, argp); + case BLKCOPY: + return blk_ioctl_copy(bdev, mode, arg); case BLKZEROOUT: return blk_ioctl_zeroout(bdev, mode, arg); case BLKGETDISKSEQ: diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 9248b6d259de..8af10b926a6f 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -82,6 +82,14 @@ struct range_entry { __u64 comp_len; }; +struct copy_range { + __u64 nr_range; + __u64 reserved; + + /* Ranges always must be at the end */ + struct range_entry ranges[]; +}; + /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */ #define FILE_DEDUPE_RANGE_SAME 0 #define FILE_DEDUPE_RANGE_DIFFERS 1 @@ -203,6 +211,7 @@ struct fsxattr { #define BLKROTATIONAL _IO(0x12,126) #define BLKZEROOUT _IO(0x12,127) #define BLKGETDISKSEQ _IOR(0x12,128,__u64) +#define BLKCOPY _IOWR(0x12, 129, struct copy_range) /* * A jump here: 130-136 are reserved for zoned block devices * (see uapi/linux/blkzoned.h) -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061028epcas5p1aecd27b2f4f694b5a18b51d3df5d7432@epcas5p1.samsung.com>]
* [PATCH v5 05/10] nvme: add copy offload support [not found] ` <CGME20221123061028epcas5p1aecd27b2f4f694b5a18b51d3df5d7432@epcas5p1.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty, Javier González For device supporting native copy, nvme driver receives read and write request with BLK_COPY op flags. For read request the nvme driver populates the payload with source information. For write request the driver converts it to nvme copy command using the source information in the payload and submits to the device. current design only supports single source range. This design is courtesy Mikulas Patocka's token based copy trace event support for nvme_copy_cmd. Set the device copy limits to queue limits. Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Javier González <javier.gonz@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- drivers/nvme/host/core.c | 106 +++++++++++++++++++++++++++++++++++++- drivers/nvme/host/fc.c | 5 ++ drivers/nvme/host/nvme.h | 7 +++ drivers/nvme/host/pci.c | 28 ++++++++-- drivers/nvme/host/rdma.c | 7 +++ drivers/nvme/host/tcp.c | 16 ++++++ drivers/nvme/host/trace.c | 19 +++++++ include/linux/nvme.h | 43 ++++++++++++++-- 8 files changed, 223 insertions(+), 8 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 4423ccd0b0b1..26ce482ac112 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -751,6 +751,80 @@ static inline void nvme_setup_flush(struct nvme_ns *ns, cmnd->common.nsid = cpu_to_le32(ns->head->ns_id); } +static inline blk_status_t nvme_setup_copy_read(struct nvme_ns *ns, + struct request *req) +{ + struct bio *bio = req->bio; + struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]); + + memcpy(token->subsys, "nvme", 4); + token->ns = ns; + token->src_sector = bio->bi_iter.bi_sector; + token->sectors = bio->bi_iter.bi_size >> 9; + + return BLK_STS_OK; +} + +static inline blk_status_t nvme_setup_copy_write(struct nvme_ns *ns, + struct request *req, struct nvme_command *cmnd) +{ + struct nvme_copy_range *range = NULL; + struct bio *bio = req->bio; + struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]); + sector_t src_sector, dst_sector, n_sectors; + u64 src_lba, dst_lba, n_lba; + unsigned short nr_range = 1; + u16 control = 0; + + if (unlikely(memcmp(token->subsys, "nvme", 4))) + return BLK_STS_NOTSUPP; + if (unlikely(token->ns != ns)) + return BLK_STS_NOTSUPP; + + src_sector = token->src_sector; + dst_sector = bio->bi_iter.bi_sector; + n_sectors = token->sectors; + if (WARN_ON(n_sectors != bio->bi_iter.bi_size >> 9)) + return BLK_STS_NOTSUPP; + + src_lba = nvme_sect_to_lba(ns, src_sector); + dst_lba = nvme_sect_to_lba(ns, dst_sector); + n_lba = nvme_sect_to_lba(ns, n_sectors); + + if (WARN_ON(!n_lba)) + return BLK_STS_NOTSUPP; + + if (req->cmd_flags & REQ_FUA) + control |= NVME_RW_FUA; + + if (req->cmd_flags & REQ_FAILFAST_DEV) + control |= NVME_RW_LR; + + memset(cmnd, 0, sizeof(*cmnd)); + cmnd->copy.opcode = nvme_cmd_copy; + cmnd->copy.nsid = cpu_to_le32(ns->head->ns_id); + cmnd->copy.sdlba = cpu_to_le64(dst_lba); + + range = kmalloc_array(nr_range, sizeof(*range), + GFP_ATOMIC | __GFP_NOWARN); + if (!range) + return BLK_STS_RESOURCE; + + range[0].slba = cpu_to_le64(src_lba); + range[0].nlb = cpu_to_le16(n_lba - 1); + + cmnd->copy.nr_range = 0; + + req->special_vec.bv_page = virt_to_page(range); + req->special_vec.bv_offset = offset_in_page(range); + req->special_vec.bv_len = sizeof(*range) * nr_range; + req->rq_flags |= RQF_SPECIAL_PAYLOAD; + + cmnd->copy.control = cpu_to_le16(control); + + return BLK_STS_OK; +} + static blk_status_t nvme_setup_discard(struct nvme_ns *ns, struct request *req, struct nvme_command *cmnd) { @@ -974,10 +1048,16 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req) ret = nvme_setup_discard(ns, req, cmd); break; case REQ_OP_READ: - ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read); + if (unlikely(req->cmd_flags & REQ_COPY)) + ret = nvme_setup_copy_read(ns, req); + else + ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read); break; case REQ_OP_WRITE: - ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write); + if (unlikely(req->cmd_flags & REQ_COPY)) + ret = nvme_setup_copy_write(ns, req, cmd); + else + ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write); break; case REQ_OP_ZONE_APPEND: ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_zone_append); @@ -1704,6 +1784,26 @@ static void nvme_config_discard(struct gendisk *disk, struct nvme_ns *ns) blk_queue_max_write_zeroes_sectors(queue, UINT_MAX); } +static void nvme_config_copy(struct gendisk *disk, struct nvme_ns *ns, + struct nvme_id_ns *id) +{ + struct nvme_ctrl *ctrl = ns->ctrl; + struct request_queue *q = disk->queue; + + if (!(ctrl->oncs & NVME_CTRL_ONCS_COPY)) { + blk_queue_max_copy_sectors_hw(q, 0); + blk_queue_flag_clear(QUEUE_FLAG_COPY, q); + return; + } + + /* setting copy limits */ + if (blk_queue_flag_test_and_set(QUEUE_FLAG_COPY, q)) + return; + + blk_queue_max_copy_sectors_hw(q, + nvme_lba_to_sect(ns, le16_to_cpu(id->mssrl))); +} + static bool nvme_ns_ids_equal(struct nvme_ns_ids *a, struct nvme_ns_ids *b) { return uuid_equal(&a->uuid, &b->uuid) && @@ -1903,6 +2003,7 @@ static void nvme_update_disk_info(struct gendisk *disk, set_capacity_and_notify(disk, capacity); nvme_config_discard(disk, ns); + nvme_config_copy(disk, ns, id); blk_queue_max_write_zeroes_sectors(disk->queue, ns->ctrl->max_zeroes_sectors); } @@ -5228,6 +5329,7 @@ static inline void _nvme_check_size(void) BUILD_BUG_ON(sizeof(struct nvme_download_firmware) != 64); BUILD_BUG_ON(sizeof(struct nvme_format_cmd) != 64); BUILD_BUG_ON(sizeof(struct nvme_dsm_cmd) != 64); + BUILD_BUG_ON(sizeof(struct nvme_copy_command) != 64); BUILD_BUG_ON(sizeof(struct nvme_write_zeroes_cmd) != 64); BUILD_BUG_ON(sizeof(struct nvme_abort_cmd) != 64); BUILD_BUG_ON(sizeof(struct nvme_get_log_page_command) != 64); diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 5d57a042dbca..b2a1cf37cd92 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2794,6 +2794,11 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *hctx, if (ret) return ret; + if (unlikely((rq->cmd_flags & REQ_COPY) && + (req_op(rq) == REQ_OP_READ))) { + blk_mq_end_request(rq, BLK_STS_OK); + return BLK_STS_OK; + } /* * nvme core doesn't quite treat the rq opaquely. Commands such * as WRITE ZEROES will return a non-zero rq payload_bytes yet diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index f9df10653f3c..17cfcfc58346 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -495,6 +495,13 @@ struct nvme_ns { }; +struct nvme_copy_token { + char subsys[4]; + struct nvme_ns *ns; + u64 src_sector; + u64 sectors; +}; + /* NVMe ns supports metadata actions by the controller (generate/strip) */ static inline bool nvme_ns_has_pi(struct nvme_ns *ns) { diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 0163bfa925aa..eb1ed2c8b3a2 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -503,16 +503,19 @@ static inline void nvme_sq_copy_cmd(struct nvme_queue *nvmeq, nvmeq->sq_tail = 0; } -static void nvme_commit_rqs(struct blk_mq_hw_ctx *hctx) +static inline void nvme_commit_sq_db(struct nvme_queue *nvmeq) { - struct nvme_queue *nvmeq = hctx->driver_data; - spin_lock(&nvmeq->sq_lock); if (nvmeq->sq_tail != nvmeq->last_sq_tail) nvme_write_sq_db(nvmeq, true); spin_unlock(&nvmeq->sq_lock); } +static void nvme_commit_rqs(struct blk_mq_hw_ctx *hctx) +{ + nvme_commit_sq_db(hctx->driver_data); +} + static void **nvme_pci_iod_list(struct request *req) { struct nvme_iod *iod = blk_mq_rq_to_pdu(req); @@ -900,6 +903,12 @@ static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req) if (ret) return ret; + if (unlikely((req->cmd_flags & REQ_COPY) && + (req_op(req) == REQ_OP_READ))) { + blk_mq_start_request(req); + return BLK_STS_OK; + } + if (blk_rq_nr_phys_segments(req)) { ret = nvme_map_data(dev, req, &iod->cmd); if (ret) @@ -913,6 +922,7 @@ static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req) } blk_mq_start_request(req); + return BLK_STS_OK; out_unmap_data: nvme_unmap_data(dev, req); @@ -946,6 +956,18 @@ static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx, ret = nvme_prep_rq(dev, req); if (unlikely(ret)) return ret; + if (unlikely((req->cmd_flags & REQ_COPY) && + (req_op(req) == REQ_OP_READ))) { + blk_mq_set_request_complete(req); + blk_mq_end_request(req, BLK_STS_OK); + /* Commit the sq if copy read was the last req in the list, + * as copy read deoesn't update sq db + */ + if (bd->last) + nvme_commit_sq_db(nvmeq); + return ret; + } + spin_lock(&nvmeq->sq_lock); nvme_sq_copy_cmd(nvmeq, &iod->cmd); nvme_write_sq_db(nvmeq, bd->last); diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 6e079abb22ee..693865139e3c 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -2040,6 +2040,13 @@ static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, if (ret) goto unmap_qe; + if (unlikely((rq->cmd_flags & REQ_COPY) && + (req_op(rq) == REQ_OP_READ))) { + blk_mq_end_request(rq, BLK_STS_OK); + ret = BLK_STS_OK; + goto unmap_qe; + } + blk_mq_start_request(rq); if (IS_ENABLED(CONFIG_BLK_DEV_INTEGRITY) && diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 9b47dcb2a7d9..e42fb53e9dc2 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -2348,6 +2348,11 @@ static blk_status_t nvme_tcp_setup_cmd_pdu(struct nvme_ns *ns, if (ret) return ret; + if (unlikely((rq->cmd_flags & REQ_COPY) && + (req_op(rq) == REQ_OP_READ))) { + return BLK_STS_OK; + } + req->state = NVME_TCP_SEND_CMD_PDU; req->status = cpu_to_le16(NVME_SC_SUCCESS); req->offset = 0; @@ -2416,6 +2421,17 @@ static blk_status_t nvme_tcp_queue_rq(struct blk_mq_hw_ctx *hctx, blk_mq_start_request(rq); + if (unlikely((rq->cmd_flags & REQ_COPY) && + (req_op(rq) == REQ_OP_READ))) { + blk_mq_set_request_complete(rq); + blk_mq_end_request(rq, BLK_STS_OK); + /* if copy read is the last req queue tcp reqs */ + if (bd->last && nvme_tcp_queue_more(queue)) + queue_work_on(queue->io_cpu, nvme_tcp_wq, + &queue->io_work); + return ret; + } + nvme_tcp_queue_request(req, true, bd->last); return BLK_STS_OK; diff --git a/drivers/nvme/host/trace.c b/drivers/nvme/host/trace.c index 1c36fcedea20..da4a7494e5a7 100644 --- a/drivers/nvme/host/trace.c +++ b/drivers/nvme/host/trace.c @@ -150,6 +150,23 @@ static const char *nvme_trace_read_write(struct trace_seq *p, u8 *cdw10) return ret; } +static const char *nvme_trace_copy(struct trace_seq *p, u8 *cdw10) +{ + const char *ret = trace_seq_buffer_ptr(p); + u64 slba = get_unaligned_le64(cdw10); + u8 nr_range = get_unaligned_le16(cdw10 + 8); + u16 control = get_unaligned_le16(cdw10 + 10); + u32 dsmgmt = get_unaligned_le32(cdw10 + 12); + u32 reftag = get_unaligned_le32(cdw10 + 16); + + trace_seq_printf(p, + "slba=%llu, nr_range=%u, ctrl=0x%x, dsmgmt=%u, reftag=%u", + slba, nr_range, control, dsmgmt, reftag); + trace_seq_putc(p, 0); + + return ret; +} + static const char *nvme_trace_dsm(struct trace_seq *p, u8 *cdw10) { const char *ret = trace_seq_buffer_ptr(p); @@ -243,6 +260,8 @@ const char *nvme_trace_parse_nvm_cmd(struct trace_seq *p, return nvme_trace_zone_mgmt_send(p, cdw10); case nvme_cmd_zone_mgmt_recv: return nvme_trace_zone_mgmt_recv(p, cdw10); + case nvme_cmd_copy: + return nvme_trace_copy(p, cdw10); default: return nvme_trace_common(p, cdw10); } diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 050d7d0cd81b..41349d78d410 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -336,7 +336,7 @@ struct nvme_id_ctrl { __u8 nvscc; __u8 nwpc; __le16 acwu; - __u8 rsvd534[2]; + __le16 ocfs; __le32 sgls; __le32 mnan; __u8 rsvd544[224]; @@ -364,6 +364,7 @@ enum { NVME_CTRL_ONCS_WRITE_ZEROES = 1 << 3, NVME_CTRL_ONCS_RESERVATIONS = 1 << 5, NVME_CTRL_ONCS_TIMESTAMP = 1 << 6, + NVME_CTRL_ONCS_COPY = 1 << 8, NVME_CTRL_VWC_PRESENT = 1 << 0, NVME_CTRL_OACS_SEC_SUPP = 1 << 0, NVME_CTRL_OACS_NS_MNGT_SUPP = 1 << 3, @@ -413,7 +414,10 @@ struct nvme_id_ns { __le16 npdg; __le16 npda; __le16 nows; - __u8 rsvd74[18]; + __le16 mssrl; + __le32 mcl; + __u8 msrc; + __u8 rsvd91[11]; __le32 anagrpid; __u8 rsvd96[3]; __u8 nsattr; @@ -794,6 +798,7 @@ enum nvme_opcode { nvme_cmd_resv_report = 0x0e, nvme_cmd_resv_acquire = 0x11, nvme_cmd_resv_release = 0x15, + nvme_cmd_copy = 0x19, nvme_cmd_zone_mgmt_send = 0x79, nvme_cmd_zone_mgmt_recv = 0x7a, nvme_cmd_zone_append = 0x7d, @@ -815,7 +820,8 @@ enum nvme_opcode { nvme_opcode_name(nvme_cmd_resv_release), \ nvme_opcode_name(nvme_cmd_zone_mgmt_send), \ nvme_opcode_name(nvme_cmd_zone_mgmt_recv), \ - nvme_opcode_name(nvme_cmd_zone_append)) + nvme_opcode_name(nvme_cmd_zone_append), \ + nvme_opcode_name(nvme_cmd_copy)) @@ -991,6 +997,36 @@ struct nvme_dsm_range { __le64 slba; }; +struct nvme_copy_command { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2; + __le64 metadata; + union nvme_data_ptr dptr; + __le64 sdlba; + __u8 nr_range; + __u8 rsvd12; + __le16 control; + __le16 rsvd13; + __le16 dspec; + __le32 ilbrt; + __le16 lbat; + __le16 lbatm; +}; + +struct nvme_copy_range { + __le64 rsvd0; + __le64 slba; + __le16 nlb; + __le16 rsvd18; + __le32 rsvd20; + __le32 eilbrt; + __le16 elbat; + __le16 elbatm; +}; + struct nvme_write_zeroes_cmd { __u8 opcode; __u8 flags; @@ -1748,6 +1784,7 @@ struct nvme_command { struct nvme_download_firmware dlfw; struct nvme_format_cmd format; struct nvme_dsm_cmd dsm; + struct nvme_copy_command copy; struct nvme_write_zeroes_cmd write_zeroes; struct nvme_zone_mgmt_send_cmd zms; struct nvme_zone_mgmt_recv_cmd zmr; -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 05/10] nvme: add copy offload support @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, Javier González, nitheshshetty For device supporting native copy, nvme driver receives read and write request with BLK_COPY op flags. For read request the nvme driver populates the payload with source information. For write request the driver converts it to nvme copy command using the source information in the payload and submits to the device. current design only supports single source range. This design is courtesy Mikulas Patocka's token based copy trace event support for nvme_copy_cmd. Set the device copy limits to queue limits. Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Javier González <javier.gonz@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- drivers/nvme/host/core.c | 106 +++++++++++++++++++++++++++++++++++++- drivers/nvme/host/fc.c | 5 ++ drivers/nvme/host/nvme.h | 7 +++ drivers/nvme/host/pci.c | 28 ++++++++-- drivers/nvme/host/rdma.c | 7 +++ drivers/nvme/host/tcp.c | 16 ++++++ drivers/nvme/host/trace.c | 19 +++++++ include/linux/nvme.h | 43 ++++++++++++++-- 8 files changed, 223 insertions(+), 8 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 4423ccd0b0b1..26ce482ac112 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -751,6 +751,80 @@ static inline void nvme_setup_flush(struct nvme_ns *ns, cmnd->common.nsid = cpu_to_le32(ns->head->ns_id); } +static inline blk_status_t nvme_setup_copy_read(struct nvme_ns *ns, + struct request *req) +{ + struct bio *bio = req->bio; + struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]); + + memcpy(token->subsys, "nvme", 4); + token->ns = ns; + token->src_sector = bio->bi_iter.bi_sector; + token->sectors = bio->bi_iter.bi_size >> 9; + + return BLK_STS_OK; +} + +static inline blk_status_t nvme_setup_copy_write(struct nvme_ns *ns, + struct request *req, struct nvme_command *cmnd) +{ + struct nvme_copy_range *range = NULL; + struct bio *bio = req->bio; + struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]); + sector_t src_sector, dst_sector, n_sectors; + u64 src_lba, dst_lba, n_lba; + unsigned short nr_range = 1; + u16 control = 0; + + if (unlikely(memcmp(token->subsys, "nvme", 4))) + return BLK_STS_NOTSUPP; + if (unlikely(token->ns != ns)) + return BLK_STS_NOTSUPP; + + src_sector = token->src_sector; + dst_sector = bio->bi_iter.bi_sector; + n_sectors = token->sectors; + if (WARN_ON(n_sectors != bio->bi_iter.bi_size >> 9)) + return BLK_STS_NOTSUPP; + + src_lba = nvme_sect_to_lba(ns, src_sector); + dst_lba = nvme_sect_to_lba(ns, dst_sector); + n_lba = nvme_sect_to_lba(ns, n_sectors); + + if (WARN_ON(!n_lba)) + return BLK_STS_NOTSUPP; + + if (req->cmd_flags & REQ_FUA) + control |= NVME_RW_FUA; + + if (req->cmd_flags & REQ_FAILFAST_DEV) + control |= NVME_RW_LR; + + memset(cmnd, 0, sizeof(*cmnd)); + cmnd->copy.opcode = nvme_cmd_copy; + cmnd->copy.nsid = cpu_to_le32(ns->head->ns_id); + cmnd->copy.sdlba = cpu_to_le64(dst_lba); + + range = kmalloc_array(nr_range, sizeof(*range), + GFP_ATOMIC | __GFP_NOWARN); + if (!range) + return BLK_STS_RESOURCE; + + range[0].slba = cpu_to_le64(src_lba); + range[0].nlb = cpu_to_le16(n_lba - 1); + + cmnd->copy.nr_range = 0; + + req->special_vec.bv_page = virt_to_page(range); + req->special_vec.bv_offset = offset_in_page(range); + req->special_vec.bv_len = sizeof(*range) * nr_range; + req->rq_flags |= RQF_SPECIAL_PAYLOAD; + + cmnd->copy.control = cpu_to_le16(control); + + return BLK_STS_OK; +} + static blk_status_t nvme_setup_discard(struct nvme_ns *ns, struct request *req, struct nvme_command *cmnd) { @@ -974,10 +1048,16 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req) ret = nvme_setup_discard(ns, req, cmd); break; case REQ_OP_READ: - ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read); + if (unlikely(req->cmd_flags & REQ_COPY)) + ret = nvme_setup_copy_read(ns, req); + else + ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read); break; case REQ_OP_WRITE: - ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write); + if (unlikely(req->cmd_flags & REQ_COPY)) + ret = nvme_setup_copy_write(ns, req, cmd); + else + ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write); break; case REQ_OP_ZONE_APPEND: ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_zone_append); @@ -1704,6 +1784,26 @@ static void nvme_config_discard(struct gendisk *disk, struct nvme_ns *ns) blk_queue_max_write_zeroes_sectors(queue, UINT_MAX); } +static void nvme_config_copy(struct gendisk *disk, struct nvme_ns *ns, + struct nvme_id_ns *id) +{ + struct nvme_ctrl *ctrl = ns->ctrl; + struct request_queue *q = disk->queue; + + if (!(ctrl->oncs & NVME_CTRL_ONCS_COPY)) { + blk_queue_max_copy_sectors_hw(q, 0); + blk_queue_flag_clear(QUEUE_FLAG_COPY, q); + return; + } + + /* setting copy limits */ + if (blk_queue_flag_test_and_set(QUEUE_FLAG_COPY, q)) + return; + + blk_queue_max_copy_sectors_hw(q, + nvme_lba_to_sect(ns, le16_to_cpu(id->mssrl))); +} + static bool nvme_ns_ids_equal(struct nvme_ns_ids *a, struct nvme_ns_ids *b) { return uuid_equal(&a->uuid, &b->uuid) && @@ -1903,6 +2003,7 @@ static void nvme_update_disk_info(struct gendisk *disk, set_capacity_and_notify(disk, capacity); nvme_config_discard(disk, ns); + nvme_config_copy(disk, ns, id); blk_queue_max_write_zeroes_sectors(disk->queue, ns->ctrl->max_zeroes_sectors); } @@ -5228,6 +5329,7 @@ static inline void _nvme_check_size(void) BUILD_BUG_ON(sizeof(struct nvme_download_firmware) != 64); BUILD_BUG_ON(sizeof(struct nvme_format_cmd) != 64); BUILD_BUG_ON(sizeof(struct nvme_dsm_cmd) != 64); + BUILD_BUG_ON(sizeof(struct nvme_copy_command) != 64); BUILD_BUG_ON(sizeof(struct nvme_write_zeroes_cmd) != 64); BUILD_BUG_ON(sizeof(struct nvme_abort_cmd) != 64); BUILD_BUG_ON(sizeof(struct nvme_get_log_page_command) != 64); diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 5d57a042dbca..b2a1cf37cd92 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2794,6 +2794,11 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *hctx, if (ret) return ret; + if (unlikely((rq->cmd_flags & REQ_COPY) && + (req_op(rq) == REQ_OP_READ))) { + blk_mq_end_request(rq, BLK_STS_OK); + return BLK_STS_OK; + } /* * nvme core doesn't quite treat the rq opaquely. Commands such * as WRITE ZEROES will return a non-zero rq payload_bytes yet diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index f9df10653f3c..17cfcfc58346 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -495,6 +495,13 @@ struct nvme_ns { }; +struct nvme_copy_token { + char subsys[4]; + struct nvme_ns *ns; + u64 src_sector; + u64 sectors; +}; + /* NVMe ns supports metadata actions by the controller (generate/strip) */ static inline bool nvme_ns_has_pi(struct nvme_ns *ns) { diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 0163bfa925aa..eb1ed2c8b3a2 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -503,16 +503,19 @@ static inline void nvme_sq_copy_cmd(struct nvme_queue *nvmeq, nvmeq->sq_tail = 0; } -static void nvme_commit_rqs(struct blk_mq_hw_ctx *hctx) +static inline void nvme_commit_sq_db(struct nvme_queue *nvmeq) { - struct nvme_queue *nvmeq = hctx->driver_data; - spin_lock(&nvmeq->sq_lock); if (nvmeq->sq_tail != nvmeq->last_sq_tail) nvme_write_sq_db(nvmeq, true); spin_unlock(&nvmeq->sq_lock); } +static void nvme_commit_rqs(struct blk_mq_hw_ctx *hctx) +{ + nvme_commit_sq_db(hctx->driver_data); +} + static void **nvme_pci_iod_list(struct request *req) { struct nvme_iod *iod = blk_mq_rq_to_pdu(req); @@ -900,6 +903,12 @@ static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req) if (ret) return ret; + if (unlikely((req->cmd_flags & REQ_COPY) && + (req_op(req) == REQ_OP_READ))) { + blk_mq_start_request(req); + return BLK_STS_OK; + } + if (blk_rq_nr_phys_segments(req)) { ret = nvme_map_data(dev, req, &iod->cmd); if (ret) @@ -913,6 +922,7 @@ static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req) } blk_mq_start_request(req); + return BLK_STS_OK; out_unmap_data: nvme_unmap_data(dev, req); @@ -946,6 +956,18 @@ static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx, ret = nvme_prep_rq(dev, req); if (unlikely(ret)) return ret; + if (unlikely((req->cmd_flags & REQ_COPY) && + (req_op(req) == REQ_OP_READ))) { + blk_mq_set_request_complete(req); + blk_mq_end_request(req, BLK_STS_OK); + /* Commit the sq if copy read was the last req in the list, + * as copy read deoesn't update sq db + */ + if (bd->last) + nvme_commit_sq_db(nvmeq); + return ret; + } + spin_lock(&nvmeq->sq_lock); nvme_sq_copy_cmd(nvmeq, &iod->cmd); nvme_write_sq_db(nvmeq, bd->last); diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 6e079abb22ee..693865139e3c 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -2040,6 +2040,13 @@ static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, if (ret) goto unmap_qe; + if (unlikely((rq->cmd_flags & REQ_COPY) && + (req_op(rq) == REQ_OP_READ))) { + blk_mq_end_request(rq, BLK_STS_OK); + ret = BLK_STS_OK; + goto unmap_qe; + } + blk_mq_start_request(rq); if (IS_ENABLED(CONFIG_BLK_DEV_INTEGRITY) && diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 9b47dcb2a7d9..e42fb53e9dc2 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -2348,6 +2348,11 @@ static blk_status_t nvme_tcp_setup_cmd_pdu(struct nvme_ns *ns, if (ret) return ret; + if (unlikely((rq->cmd_flags & REQ_COPY) && + (req_op(rq) == REQ_OP_READ))) { + return BLK_STS_OK; + } + req->state = NVME_TCP_SEND_CMD_PDU; req->status = cpu_to_le16(NVME_SC_SUCCESS); req->offset = 0; @@ -2416,6 +2421,17 @@ static blk_status_t nvme_tcp_queue_rq(struct blk_mq_hw_ctx *hctx, blk_mq_start_request(rq); + if (unlikely((rq->cmd_flags & REQ_COPY) && + (req_op(rq) == REQ_OP_READ))) { + blk_mq_set_request_complete(rq); + blk_mq_end_request(rq, BLK_STS_OK); + /* if copy read is the last req queue tcp reqs */ + if (bd->last && nvme_tcp_queue_more(queue)) + queue_work_on(queue->io_cpu, nvme_tcp_wq, + &queue->io_work); + return ret; + } + nvme_tcp_queue_request(req, true, bd->last); return BLK_STS_OK; diff --git a/drivers/nvme/host/trace.c b/drivers/nvme/host/trace.c index 1c36fcedea20..da4a7494e5a7 100644 --- a/drivers/nvme/host/trace.c +++ b/drivers/nvme/host/trace.c @@ -150,6 +150,23 @@ static const char *nvme_trace_read_write(struct trace_seq *p, u8 *cdw10) return ret; } +static const char *nvme_trace_copy(struct trace_seq *p, u8 *cdw10) +{ + const char *ret = trace_seq_buffer_ptr(p); + u64 slba = get_unaligned_le64(cdw10); + u8 nr_range = get_unaligned_le16(cdw10 + 8); + u16 control = get_unaligned_le16(cdw10 + 10); + u32 dsmgmt = get_unaligned_le32(cdw10 + 12); + u32 reftag = get_unaligned_le32(cdw10 + 16); + + trace_seq_printf(p, + "slba=%llu, nr_range=%u, ctrl=0x%x, dsmgmt=%u, reftag=%u", + slba, nr_range, control, dsmgmt, reftag); + trace_seq_putc(p, 0); + + return ret; +} + static const char *nvme_trace_dsm(struct trace_seq *p, u8 *cdw10) { const char *ret = trace_seq_buffer_ptr(p); @@ -243,6 +260,8 @@ const char *nvme_trace_parse_nvm_cmd(struct trace_seq *p, return nvme_trace_zone_mgmt_send(p, cdw10); case nvme_cmd_zone_mgmt_recv: return nvme_trace_zone_mgmt_recv(p, cdw10); + case nvme_cmd_copy: + return nvme_trace_copy(p, cdw10); default: return nvme_trace_common(p, cdw10); } diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 050d7d0cd81b..41349d78d410 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -336,7 +336,7 @@ struct nvme_id_ctrl { __u8 nvscc; __u8 nwpc; __le16 acwu; - __u8 rsvd534[2]; + __le16 ocfs; __le32 sgls; __le32 mnan; __u8 rsvd544[224]; @@ -364,6 +364,7 @@ enum { NVME_CTRL_ONCS_WRITE_ZEROES = 1 << 3, NVME_CTRL_ONCS_RESERVATIONS = 1 << 5, NVME_CTRL_ONCS_TIMESTAMP = 1 << 6, + NVME_CTRL_ONCS_COPY = 1 << 8, NVME_CTRL_VWC_PRESENT = 1 << 0, NVME_CTRL_OACS_SEC_SUPP = 1 << 0, NVME_CTRL_OACS_NS_MNGT_SUPP = 1 << 3, @@ -413,7 +414,10 @@ struct nvme_id_ns { __le16 npdg; __le16 npda; __le16 nows; - __u8 rsvd74[18]; + __le16 mssrl; + __le32 mcl; + __u8 msrc; + __u8 rsvd91[11]; __le32 anagrpid; __u8 rsvd96[3]; __u8 nsattr; @@ -794,6 +798,7 @@ enum nvme_opcode { nvme_cmd_resv_report = 0x0e, nvme_cmd_resv_acquire = 0x11, nvme_cmd_resv_release = 0x15, + nvme_cmd_copy = 0x19, nvme_cmd_zone_mgmt_send = 0x79, nvme_cmd_zone_mgmt_recv = 0x7a, nvme_cmd_zone_append = 0x7d, @@ -815,7 +820,8 @@ enum nvme_opcode { nvme_opcode_name(nvme_cmd_resv_release), \ nvme_opcode_name(nvme_cmd_zone_mgmt_send), \ nvme_opcode_name(nvme_cmd_zone_mgmt_recv), \ - nvme_opcode_name(nvme_cmd_zone_append)) + nvme_opcode_name(nvme_cmd_zone_append), \ + nvme_opcode_name(nvme_cmd_copy)) @@ -991,6 +997,36 @@ struct nvme_dsm_range { __le64 slba; }; +struct nvme_copy_command { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2; + __le64 metadata; + union nvme_data_ptr dptr; + __le64 sdlba; + __u8 nr_range; + __u8 rsvd12; + __le16 control; + __le16 rsvd13; + __le16 dspec; + __le32 ilbrt; + __le16 lbat; + __le16 lbatm; +}; + +struct nvme_copy_range { + __le64 rsvd0; + __le64 slba; + __le16 nlb; + __le16 rsvd18; + __le32 rsvd20; + __le32 eilbrt; + __le16 elbat; + __le16 elbatm; +}; + struct nvme_write_zeroes_cmd { __u8 opcode; __u8 flags; @@ -1748,6 +1784,7 @@ struct nvme_command { struct nvme_download_firmware dlfw; struct nvme_format_cmd format; struct nvme_dsm_cmd dsm; + struct nvme_copy_command copy; struct nvme_write_zeroes_cmd write_zeroes; struct nvme_zone_mgmt_send_cmd zms; struct nvme_zone_mgmt_recv_cmd zmr; -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061031epcas5p3745558c2caffd2fd21d15feff00495e9@epcas5p3.samsung.com>]
* [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns [not found] ` <CGME20221123061031epcas5p3745558c2caffd2fd21d15feff00495e9@epcas5p3.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty Add support for handling target command on target. For bdev-ns we call into blkdev_issue_copy, which the block layer completes by a offloaded copy request to backend bdev or by emulating the request. For file-ns we call vfs_copy_file_range to service our request. Currently target always shows copy capability by setting NVME_CTRL_ONCS_COPY in controller ONCS. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- drivers/nvme/target/admin-cmd.c | 9 +++- drivers/nvme/target/io-cmd-bdev.c | 79 +++++++++++++++++++++++++++++++ drivers/nvme/target/io-cmd-file.c | 51 ++++++++++++++++++++ drivers/nvme/target/loop.c | 6 +++ drivers/nvme/target/nvmet.h | 2 + 5 files changed, 145 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c index c8a061ce3ee5..5ae509ff4b19 100644 --- a/drivers/nvme/target/admin-cmd.c +++ b/drivers/nvme/target/admin-cmd.c @@ -431,8 +431,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req) id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES); id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES); id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM | - NVME_CTRL_ONCS_WRITE_ZEROES); - + NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY); /* XXX: don't report vwc if the underlying device is write through */ id->vwc = NVME_CTRL_VWC_PRESENT; @@ -534,6 +533,12 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req) if (req->ns->bdev) nvmet_bdev_set_limits(req->ns->bdev, id); + else { + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); + id->mssrl = cpu_to_le16(BIO_MAX_VECS << + (PAGE_SHIFT - SECTOR_SHIFT)); + id->mcl = cpu_to_le32(le16_to_cpu(id->mssrl)); + } /* * We just provide a single LBA format that matches what the diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c index c2d6cea0236b..01f0160125fb 100644 --- a/drivers/nvme/target/io-cmd-bdev.c +++ b/drivers/nvme/target/io-cmd-bdev.c @@ -46,6 +46,19 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id) id->npda = id->npdg; /* NOWS = Namespace Optimal Write Size */ id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev)); + + /*Copy limits*/ + if (bdev_max_copy_sectors(bdev)) { + id->msrc = id->msrc; + id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) << + SECTOR_SHIFT) / bdev_logical_block_size(bdev)); + id->mcl = cpu_to_le32(id->mssrl); + } else { + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); + id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) / + bdev_logical_block_size(bdev)); + id->mcl = cpu_to_le32(id->mssrl); + } } void nvmet_bdev_ns_disable(struct nvmet_ns *ns) @@ -184,6 +197,23 @@ static void nvmet_bio_done(struct bio *bio) nvmet_req_bio_put(req, bio); } +static void nvmet_bdev_copy_end_io(void *private, int status) +{ + struct nvmet_req *req = (struct nvmet_req *)private; + int id; + + if (status) { + for (id = 0 ; id < req->nr_range; id++) { + if (req->ranges[id].len != req->ranges[id].comp_len) { + req->cqe->result.u32 = cpu_to_le32(id); + break; + } + } + } + kfree(req->ranges); + nvmet_req_complete(req, errno_to_nvme_status(req, status)); +} + #ifdef CONFIG_BLK_DEV_INTEGRITY static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio, struct sg_mapping_iter *miter) @@ -450,6 +480,51 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req) } } +static void nvmet_bdev_execute_copy(struct nvmet_req *req) +{ + struct nvme_copy_range range; + struct range_entry *ranges; + struct nvme_command *cmnd = req->cmd; + sector_t dest, dest_off = 0; + int ret, id, nr_range; + + nr_range = cmnd->copy.nr_range + 1; + dest = le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift; + ranges = kmalloc_array(nr_range, sizeof(*ranges), GFP_KERNEL); + + for (id = 0 ; id < nr_range; id++) { + ret = nvmet_copy_from_sgl(req, id * sizeof(range), + &range, sizeof(range)); + if (ret) + goto out; + + ranges[id].dst = dest + dest_off; + ranges[id].src = le64_to_cpu(range.slba) << + req->ns->blksize_shift; + ranges[id].len = (le16_to_cpu(range.nlb) + 1) << + req->ns->blksize_shift; + ranges[id].comp_len = 0; + dest_off += ranges[id].len; + } + req->ranges = ranges; + req->nr_range = nr_range; + ret = blkdev_issue_copy(req->ns->bdev, req->ns->bdev, ranges, nr_range, + nvmet_bdev_copy_end_io, (void *)req, GFP_KERNEL); + if (ret) { + for (id = 0 ; id < nr_range; id++) { + if (ranges[id].len != ranges[id].comp_len) { + req->cqe->result.u32 = cpu_to_le32(id); + break; + } + } + goto out; + } else + return; +out: + kfree(ranges); + nvmet_req_complete(req, errno_to_nvme_status(req, ret)); +} + u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) { switch (req->cmd->common.opcode) { @@ -468,6 +543,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) case nvme_cmd_write_zeroes: req->execute = nvmet_bdev_execute_write_zeroes; return 0; + case nvme_cmd_copy: + req->execute = nvmet_bdev_execute_copy; + return 0; + default: return nvmet_report_invalid_opcode(req); } diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c index 64b47e2a4633..a81d38796e17 100644 --- a/drivers/nvme/target/io-cmd-file.c +++ b/drivers/nvme/target/io-cmd-file.c @@ -338,6 +338,48 @@ static void nvmet_file_dsm_work(struct work_struct *w) } } +static void nvmet_file_copy_work(struct work_struct *w) +{ + struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); + int nr_range; + loff_t pos; + struct nvme_command *cmnd = req->cmd; + int ret = 0, len = 0, src, id; + + nr_range = cmnd->copy.nr_range + 1; + pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift; + if (unlikely(pos + req->transfer_len > req->ns->size)) { + nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC)); + return; + } + + for (id = 0 ; id < nr_range; id++) { + struct nvme_copy_range range; + + ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range, + sizeof(range)); + if (ret) + goto out; + + len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift); + src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift)); + ret = vfs_copy_file_range(req->ns->file, src, req->ns->file, + pos, len, 0); +out: + if (ret != len) { + pos += ret; + req->cqe->result.u32 = cpu_to_le32(id); + nvmet_req_complete(req, ret < 0 ? + errno_to_nvme_status(req, ret) : + errno_to_nvme_status(req, -EIO)); + return; + + } else + pos += len; +} + nvmet_req_complete(req, ret); + +} static void nvmet_file_execute_dsm(struct nvmet_req *req) { if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req))) @@ -346,6 +388,12 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req) queue_work(nvmet_wq, &req->f.work); } +static void nvmet_file_execute_copy(struct nvmet_req *req) +{ + INIT_WORK(&req->f.work, nvmet_file_copy_work); + queue_work(nvmet_wq, &req->f.work); +} + static void nvmet_file_write_zeroes_work(struct work_struct *w) { struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); @@ -392,6 +440,9 @@ u16 nvmet_file_parse_io_cmd(struct nvmet_req *req) case nvme_cmd_write_zeroes: req->execute = nvmet_file_execute_write_zeroes; return 0; + case nvme_cmd_copy: + req->execute = nvmet_file_execute_copy; + return 0; default: return nvmet_report_invalid_opcode(req); } diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index b45fe3adf015..55802632b407 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -146,6 +146,12 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx, return ret; blk_mq_start_request(req); + if (unlikely((req->cmd_flags & REQ_COPY) && + (req_op(req) == REQ_OP_READ))) { + blk_mq_set_request_complete(req); + blk_mq_end_request(req, BLK_STS_OK); + return BLK_STS_OK; + } iod->cmd.common.flags |= NVME_CMD_SGL_METABUF; iod->req.port = queue->ctrl->port; if (!nvmet_req_init(&iod->req, &queue->nvme_cq, diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h index dfe3894205aa..3b4c7d2ee45d 100644 --- a/drivers/nvme/target/nvmet.h +++ b/drivers/nvme/target/nvmet.h @@ -391,6 +391,8 @@ struct nvmet_req { struct device *p2p_client; u16 error_loc; u64 error_slba; + struct range_entry *ranges; + unsigned int nr_range; }; extern struct workqueue_struct *buffered_io_wq; -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, nitheshshetty Add support for handling target command on target. For bdev-ns we call into blkdev_issue_copy, which the block layer completes by a offloaded copy request to backend bdev or by emulating the request. For file-ns we call vfs_copy_file_range to service our request. Currently target always shows copy capability by setting NVME_CTRL_ONCS_COPY in controller ONCS. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- drivers/nvme/target/admin-cmd.c | 9 +++- drivers/nvme/target/io-cmd-bdev.c | 79 +++++++++++++++++++++++++++++++ drivers/nvme/target/io-cmd-file.c | 51 ++++++++++++++++++++ drivers/nvme/target/loop.c | 6 +++ drivers/nvme/target/nvmet.h | 2 + 5 files changed, 145 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c index c8a061ce3ee5..5ae509ff4b19 100644 --- a/drivers/nvme/target/admin-cmd.c +++ b/drivers/nvme/target/admin-cmd.c @@ -431,8 +431,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req) id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES); id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES); id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM | - NVME_CTRL_ONCS_WRITE_ZEROES); - + NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY); /* XXX: don't report vwc if the underlying device is write through */ id->vwc = NVME_CTRL_VWC_PRESENT; @@ -534,6 +533,12 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req) if (req->ns->bdev) nvmet_bdev_set_limits(req->ns->bdev, id); + else { + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); + id->mssrl = cpu_to_le16(BIO_MAX_VECS << + (PAGE_SHIFT - SECTOR_SHIFT)); + id->mcl = cpu_to_le32(le16_to_cpu(id->mssrl)); + } /* * We just provide a single LBA format that matches what the diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c index c2d6cea0236b..01f0160125fb 100644 --- a/drivers/nvme/target/io-cmd-bdev.c +++ b/drivers/nvme/target/io-cmd-bdev.c @@ -46,6 +46,19 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id) id->npda = id->npdg; /* NOWS = Namespace Optimal Write Size */ id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev)); + + /*Copy limits*/ + if (bdev_max_copy_sectors(bdev)) { + id->msrc = id->msrc; + id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) << + SECTOR_SHIFT) / bdev_logical_block_size(bdev)); + id->mcl = cpu_to_le32(id->mssrl); + } else { + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); + id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) / + bdev_logical_block_size(bdev)); + id->mcl = cpu_to_le32(id->mssrl); + } } void nvmet_bdev_ns_disable(struct nvmet_ns *ns) @@ -184,6 +197,23 @@ static void nvmet_bio_done(struct bio *bio) nvmet_req_bio_put(req, bio); } +static void nvmet_bdev_copy_end_io(void *private, int status) +{ + struct nvmet_req *req = (struct nvmet_req *)private; + int id; + + if (status) { + for (id = 0 ; id < req->nr_range; id++) { + if (req->ranges[id].len != req->ranges[id].comp_len) { + req->cqe->result.u32 = cpu_to_le32(id); + break; + } + } + } + kfree(req->ranges); + nvmet_req_complete(req, errno_to_nvme_status(req, status)); +} + #ifdef CONFIG_BLK_DEV_INTEGRITY static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio, struct sg_mapping_iter *miter) @@ -450,6 +480,51 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req) } } +static void nvmet_bdev_execute_copy(struct nvmet_req *req) +{ + struct nvme_copy_range range; + struct range_entry *ranges; + struct nvme_command *cmnd = req->cmd; + sector_t dest, dest_off = 0; + int ret, id, nr_range; + + nr_range = cmnd->copy.nr_range + 1; + dest = le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift; + ranges = kmalloc_array(nr_range, sizeof(*ranges), GFP_KERNEL); + + for (id = 0 ; id < nr_range; id++) { + ret = nvmet_copy_from_sgl(req, id * sizeof(range), + &range, sizeof(range)); + if (ret) + goto out; + + ranges[id].dst = dest + dest_off; + ranges[id].src = le64_to_cpu(range.slba) << + req->ns->blksize_shift; + ranges[id].len = (le16_to_cpu(range.nlb) + 1) << + req->ns->blksize_shift; + ranges[id].comp_len = 0; + dest_off += ranges[id].len; + } + req->ranges = ranges; + req->nr_range = nr_range; + ret = blkdev_issue_copy(req->ns->bdev, req->ns->bdev, ranges, nr_range, + nvmet_bdev_copy_end_io, (void *)req, GFP_KERNEL); + if (ret) { + for (id = 0 ; id < nr_range; id++) { + if (ranges[id].len != ranges[id].comp_len) { + req->cqe->result.u32 = cpu_to_le32(id); + break; + } + } + goto out; + } else + return; +out: + kfree(ranges); + nvmet_req_complete(req, errno_to_nvme_status(req, ret)); +} + u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) { switch (req->cmd->common.opcode) { @@ -468,6 +543,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) case nvme_cmd_write_zeroes: req->execute = nvmet_bdev_execute_write_zeroes; return 0; + case nvme_cmd_copy: + req->execute = nvmet_bdev_execute_copy; + return 0; + default: return nvmet_report_invalid_opcode(req); } diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c index 64b47e2a4633..a81d38796e17 100644 --- a/drivers/nvme/target/io-cmd-file.c +++ b/drivers/nvme/target/io-cmd-file.c @@ -338,6 +338,48 @@ static void nvmet_file_dsm_work(struct work_struct *w) } } +static void nvmet_file_copy_work(struct work_struct *w) +{ + struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); + int nr_range; + loff_t pos; + struct nvme_command *cmnd = req->cmd; + int ret = 0, len = 0, src, id; + + nr_range = cmnd->copy.nr_range + 1; + pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift; + if (unlikely(pos + req->transfer_len > req->ns->size)) { + nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC)); + return; + } + + for (id = 0 ; id < nr_range; id++) { + struct nvme_copy_range range; + + ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range, + sizeof(range)); + if (ret) + goto out; + + len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift); + src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift)); + ret = vfs_copy_file_range(req->ns->file, src, req->ns->file, + pos, len, 0); +out: + if (ret != len) { + pos += ret; + req->cqe->result.u32 = cpu_to_le32(id); + nvmet_req_complete(req, ret < 0 ? + errno_to_nvme_status(req, ret) : + errno_to_nvme_status(req, -EIO)); + return; + + } else + pos += len; +} + nvmet_req_complete(req, ret); + +} static void nvmet_file_execute_dsm(struct nvmet_req *req) { if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req))) @@ -346,6 +388,12 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req) queue_work(nvmet_wq, &req->f.work); } +static void nvmet_file_execute_copy(struct nvmet_req *req) +{ + INIT_WORK(&req->f.work, nvmet_file_copy_work); + queue_work(nvmet_wq, &req->f.work); +} + static void nvmet_file_write_zeroes_work(struct work_struct *w) { struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); @@ -392,6 +440,9 @@ u16 nvmet_file_parse_io_cmd(struct nvmet_req *req) case nvme_cmd_write_zeroes: req->execute = nvmet_file_execute_write_zeroes; return 0; + case nvme_cmd_copy: + req->execute = nvmet_file_execute_copy; + return 0; default: return nvmet_report_invalid_opcode(req); } diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index b45fe3adf015..55802632b407 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -146,6 +146,12 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx, return ret; blk_mq_start_request(req); + if (unlikely((req->cmd_flags & REQ_COPY) && + (req_op(req) == REQ_OP_READ))) { + blk_mq_set_request_complete(req); + blk_mq_end_request(req, BLK_STS_OK); + return BLK_STS_OK; + } iod->cmd.common.flags |= NVME_CMD_SGL_METABUF; iod->req.port = queue->ctrl->port; if (!nvmet_req_init(&iod->req, &queue->nvme_cq, diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h index dfe3894205aa..3b4c7d2ee45d 100644 --- a/drivers/nvme/target/nvmet.h +++ b/drivers/nvme/target/nvmet.h @@ -391,6 +391,8 @@ struct nvmet_req { struct device *p2p_client; u16 error_loc; u64 error_slba; + struct range_entry *ranges; + unsigned int nr_range; }; extern struct workqueue_struct *buffered_io_wq; -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns 2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty (?) @ 2022-11-23 8:17 ` Guixin Liu 2022-11-23 9:39 ` [dm-devel] " Nitesh Shetty -1 siblings, 1 reply; 67+ messages in thread From: Guixin Liu @ 2022-11-23 8:17 UTC (permalink / raw) To: Nitesh Shetty, axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, linux-block, linux-fsdevel, nitheshshetty [-- Attachment #1.1: Type: text/plain, Size: 9360 bytes --] 在 2022/11/23 13:58, Nitesh Shetty 写道: > Add support for handling target command on target. > For bdev-ns we call into blkdev_issue_copy, which the block layer > completes by a offloaded copy request to backend bdev or by emulating the > request. > > For file-ns we call vfs_copy_file_range to service our request. > > Currently target always shows copy capability by setting > NVME_CTRL_ONCS_COPY in controller ONCS. > > Signed-off-by: Nitesh Shetty<nj.shetty@samsung.com> > Signed-off-by: Anuj Gupta<anuj20.g@samsung.com> > --- > drivers/nvme/target/admin-cmd.c | 9 +++- > drivers/nvme/target/io-cmd-bdev.c | 79 +++++++++++++++++++++++++++++++ > drivers/nvme/target/io-cmd-file.c | 51 ++++++++++++++++++++ > drivers/nvme/target/loop.c | 6 +++ > drivers/nvme/target/nvmet.h | 2 + > 5 files changed, 145 insertions(+), 2 deletions(-) > > diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c > index c8a061ce3ee5..5ae509ff4b19 100644 > --- a/drivers/nvme/target/admin-cmd.c > +++ b/drivers/nvme/target/admin-cmd.c > @@ -431,8 +431,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req) > id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES); > id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES); > id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM | > - NVME_CTRL_ONCS_WRITE_ZEROES); > - > + NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY); > /* XXX: don't report vwc if the underlying device is write through */ > id->vwc = NVME_CTRL_VWC_PRESENT; > > @@ -534,6 +533,12 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req) > > if (req->ns->bdev) > nvmet_bdev_set_limits(req->ns->bdev, id); > + else { > + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); > + id->mssrl = cpu_to_le16(BIO_MAX_VECS << > + (PAGE_SHIFT - SECTOR_SHIFT)); > + id->mcl = cpu_to_le32(le16_to_cpu(id->mssrl)); > + } > > /* > * We just provide a single LBA format that matches what the > diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c > index c2d6cea0236b..01f0160125fb 100644 > --- a/drivers/nvme/target/io-cmd-bdev.c > +++ b/drivers/nvme/target/io-cmd-bdev.c > @@ -46,6 +46,19 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id) > id->npda = id->npdg; > /* NOWS = Namespace Optimal Write Size */ > id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev)); > + > + /*Copy limits*/ > + if (bdev_max_copy_sectors(bdev)) { > + id->msrc = id->msrc; > + id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) << > + SECTOR_SHIFT) / bdev_logical_block_size(bdev)); > + id->mcl = cpu_to_le32(id->mssrl); > + } else { > + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); > + id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) / > + bdev_logical_block_size(bdev)); > + id->mcl = cpu_to_le32(id->mssrl); > + } Based on my understanding of the NVMe protocol 2.0, the mssrl is the max length per single range entry, the mcl is the total max copy length in one copy command, may I ask why mcl = msssrl? not mcl = mssrl * msrc? Best Regards, Guixin Liu > } > > void nvmet_bdev_ns_disable(struct nvmet_ns *ns) > @@ -184,6 +197,23 @@ static void nvmet_bio_done(struct bio *bio) > nvmet_req_bio_put(req, bio); > } > > +static void nvmet_bdev_copy_end_io(void *private, int status) > +{ > + struct nvmet_req *req = (struct nvmet_req *)private; > + int id; > + > + if (status) { > + for (id = 0 ; id < req->nr_range; id++) { > + if (req->ranges[id].len != req->ranges[id].comp_len) { > + req->cqe->result.u32 = cpu_to_le32(id); > + break; > + } > + } > + } > + kfree(req->ranges); > + nvmet_req_complete(req, errno_to_nvme_status(req, status)); > +} > + > #ifdef CONFIG_BLK_DEV_INTEGRITY > static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio, > struct sg_mapping_iter *miter) > @@ -450,6 +480,51 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req) > } > } > > +static void nvmet_bdev_execute_copy(struct nvmet_req *req) > +{ > + struct nvme_copy_range range; > + struct range_entry *ranges; > + struct nvme_command *cmnd = req->cmd; > + sector_t dest, dest_off = 0; > + int ret, id, nr_range; > + > + nr_range = cmnd->copy.nr_range + 1; > + dest = le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift; > + ranges = kmalloc_array(nr_range, sizeof(*ranges), GFP_KERNEL); > + > + for (id = 0 ; id < nr_range; id++) { > + ret = nvmet_copy_from_sgl(req, id * sizeof(range), > + &range, sizeof(range)); > + if (ret) > + goto out; > + > + ranges[id].dst = dest + dest_off; > + ranges[id].src = le64_to_cpu(range.slba) << > + req->ns->blksize_shift; > + ranges[id].len = (le16_to_cpu(range.nlb) + 1) << > + req->ns->blksize_shift; > + ranges[id].comp_len = 0; > + dest_off += ranges[id].len; > + } > + req->ranges = ranges; > + req->nr_range = nr_range; > + ret = blkdev_issue_copy(req->ns->bdev, req->ns->bdev, ranges, nr_range, > + nvmet_bdev_copy_end_io, (void *)req, GFP_KERNEL); > + if (ret) { > + for (id = 0 ; id < nr_range; id++) { > + if (ranges[id].len != ranges[id].comp_len) { > + req->cqe->result.u32 = cpu_to_le32(id); > + break; > + } > + } > + goto out; > + } else > + return; > +out: > + kfree(ranges); > + nvmet_req_complete(req, errno_to_nvme_status(req, ret)); > +} > + > u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) > { > switch (req->cmd->common.opcode) { > @@ -468,6 +543,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) > case nvme_cmd_write_zeroes: > req->execute = nvmet_bdev_execute_write_zeroes; > return 0; > + case nvme_cmd_copy: > + req->execute = nvmet_bdev_execute_copy; > + return 0; > + > default: > return nvmet_report_invalid_opcode(req); > } > diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c > index 64b47e2a4633..a81d38796e17 100644 > --- a/drivers/nvme/target/io-cmd-file.c > +++ b/drivers/nvme/target/io-cmd-file.c > @@ -338,6 +338,48 @@ static void nvmet_file_dsm_work(struct work_struct *w) > } > } > > +static void nvmet_file_copy_work(struct work_struct *w) > +{ > + struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); > + int nr_range; > + loff_t pos; > + struct nvme_command *cmnd = req->cmd; > + int ret = 0, len = 0, src, id; > + > + nr_range = cmnd->copy.nr_range + 1; > + pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift; > + if (unlikely(pos + req->transfer_len > req->ns->size)) { > + nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC)); > + return; > + } > + > + for (id = 0 ; id < nr_range; id++) { > + struct nvme_copy_range range; > + > + ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range, > + sizeof(range)); > + if (ret) > + goto out; > + > + len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift); > + src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift)); > + ret = vfs_copy_file_range(req->ns->file, src, req->ns->file, > + pos, len, 0); > +out: > + if (ret != len) { > + pos += ret; > + req->cqe->result.u32 = cpu_to_le32(id); > + nvmet_req_complete(req, ret < 0 ? > + errno_to_nvme_status(req, ret) : > + errno_to_nvme_status(req, -EIO)); > + return; > + > + } else > + pos += len; > +} > + nvmet_req_complete(req, ret); > + > +} > static void nvmet_file_execute_dsm(struct nvmet_req *req) > { > if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req))) > @@ -346,6 +388,12 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req) > queue_work(nvmet_wq, &req->f.work); > } > > +static void nvmet_file_execute_copy(struct nvmet_req *req) > +{ > + INIT_WORK(&req->f.work, nvmet_file_copy_work); > + queue_work(nvmet_wq, &req->f.work); > +} > + > static void nvmet_file_write_zeroes_work(struct work_struct *w) > { > struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); > @@ -392,6 +440,9 @@ u16 nvmet_file_parse_io_cmd(struct nvmet_req *req) > case nvme_cmd_write_zeroes: > req->execute = nvmet_file_execute_write_zeroes; > return 0; > + case nvme_cmd_copy: > + req->execute = nvmet_file_execute_copy; > + return 0; > default: > return nvmet_report_invalid_opcode(req); > } > diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c > index b45fe3adf015..55802632b407 100644 > --- a/drivers/nvme/target/loop.c > +++ b/drivers/nvme/target/loop.c > @@ -146,6 +146,12 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx, > return ret; > > blk_mq_start_request(req); > + if (unlikely((req->cmd_flags & REQ_COPY) && > + (req_op(req) == REQ_OP_READ))) { > + blk_mq_set_request_complete(req); > + blk_mq_end_request(req, BLK_STS_OK); > + return BLK_STS_OK; > + } > iod->cmd.common.flags |= NVME_CMD_SGL_METABUF; > iod->req.port = queue->ctrl->port; > if (!nvmet_req_init(&iod->req, &queue->nvme_cq, > diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h > index dfe3894205aa..3b4c7d2ee45d 100644 > --- a/drivers/nvme/target/nvmet.h > +++ b/drivers/nvme/target/nvmet.h > @@ -391,6 +391,8 @@ struct nvmet_req { > struct device *p2p_client; > u16 error_loc; > u64 error_slba; > + struct range_entry *ranges; > + unsigned int nr_range; > }; > > extern struct workqueue_struct *buffered_io_wq; [-- Attachment #1.2: Type: text/html, Size: 9938 bytes --] [-- Attachment #2: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns 2022-11-23 8:17 ` Guixin Liu @ 2022-11-23 9:39 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 9:39 UTC (permalink / raw) To: Guixin Liu Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev [-- Attachment #1: Type: text/plain, Size: 10272 bytes --] On Wed, Nov 23, 2022 at 04:17:41PM +0800, Guixin Liu wrote: > > 在 2022/11/23 13:58, Nitesh Shetty 写道: > > Add support for handling target command on target. > > For bdev-ns we call into blkdev_issue_copy, which the block layer > > completes by a offloaded copy request to backend bdev or by emulating the > > request. > > > > For file-ns we call vfs_copy_file_range to service our request. > > > > Currently target always shows copy capability by setting > > NVME_CTRL_ONCS_COPY in controller ONCS. > > > > Signed-off-by: Nitesh Shetty<nj.shetty@samsung.com> > > Signed-off-by: Anuj Gupta<anuj20.g@samsung.com> > > --- > > drivers/nvme/target/admin-cmd.c | 9 +++- > > drivers/nvme/target/io-cmd-bdev.c | 79 +++++++++++++++++++++++++++++++ > > drivers/nvme/target/io-cmd-file.c | 51 ++++++++++++++++++++ > > drivers/nvme/target/loop.c | 6 +++ > > drivers/nvme/target/nvmet.h | 2 + > > 5 files changed, 145 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c > > index c8a061ce3ee5..5ae509ff4b19 100644 > > --- a/drivers/nvme/target/admin-cmd.c > > +++ b/drivers/nvme/target/admin-cmd.c > > @@ -431,8 +431,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req) > > id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES); > > id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES); > > id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM | > > - NVME_CTRL_ONCS_WRITE_ZEROES); > > - > > + NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY); > > /* XXX: don't report vwc if the underlying device is write through */ > > id->vwc = NVME_CTRL_VWC_PRESENT; > > @@ -534,6 +533,12 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req) > > if (req->ns->bdev) > > nvmet_bdev_set_limits(req->ns->bdev, id); > > + else { > > + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); > > + id->mssrl = cpu_to_le16(BIO_MAX_VECS << > > + (PAGE_SHIFT - SECTOR_SHIFT)); > > + id->mcl = cpu_to_le32(le16_to_cpu(id->mssrl)); > > + } > > /* > > * We just provide a single LBA format that matches what the > > diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c > > index c2d6cea0236b..01f0160125fb 100644 > > --- a/drivers/nvme/target/io-cmd-bdev.c > > +++ b/drivers/nvme/target/io-cmd-bdev.c > > @@ -46,6 +46,19 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id) > > id->npda = id->npdg; > > /* NOWS = Namespace Optimal Write Size */ > > id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev)); > > + > > + /*Copy limits*/ > > + if (bdev_max_copy_sectors(bdev)) { > > + id->msrc = id->msrc; > > + id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) << > > + SECTOR_SHIFT) / bdev_logical_block_size(bdev)); > > + id->mcl = cpu_to_le32(id->mssrl); > > + } else { > > + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); > > + id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) / > > + bdev_logical_block_size(bdev)); > > + id->mcl = cpu_to_le32(id->mssrl); > > + } > > Based on my understanding of the NVMe protocol 2.0, the mssrl is the max > length per single range entry, > > the mcl is the total max copy length in one copy command, may I ask why mcl > = msssrl? not mcl = mssrl * msrc? > > Best Regards, > > Guixin Liu > You are right, as per NVMe spec, mcl >= mssrl. Since we decided to make copy offload generic for NVMe/Xcopy/copy across namespaces and all, we went with 2 bio/bdev design, which is compatible with device mapper. So effectively we are using 1 range(msrc), when using only 1 range, I feel it makes sense to use one of the limits, so went with mssrl. Thanks, Nitesh > > } > > void nvmet_bdev_ns_disable(struct nvmet_ns *ns) > > @@ -184,6 +197,23 @@ static void nvmet_bio_done(struct bio *bio) > > nvmet_req_bio_put(req, bio); > > } > > +static void nvmet_bdev_copy_end_io(void *private, int status) > > +{ > > + struct nvmet_req *req = (struct nvmet_req *)private; > > + int id; > > + > > + if (status) { > > + for (id = 0 ; id < req->nr_range; id++) { > > + if (req->ranges[id].len != req->ranges[id].comp_len) { > > + req->cqe->result.u32 = cpu_to_le32(id); > > + break; > > + } > > + } > > + } > > + kfree(req->ranges); > > + nvmet_req_complete(req, errno_to_nvme_status(req, status)); > > +} > > + > > #ifdef CONFIG_BLK_DEV_INTEGRITY > > static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio, > > struct sg_mapping_iter *miter) > > @@ -450,6 +480,51 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req) > > } > > } > > +static void nvmet_bdev_execute_copy(struct nvmet_req *req) > > +{ > > + struct nvme_copy_range range; > > + struct range_entry *ranges; > > + struct nvme_command *cmnd = req->cmd; > > + sector_t dest, dest_off = 0; > > + int ret, id, nr_range; > > + > > + nr_range = cmnd->copy.nr_range + 1; > > + dest = le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift; > > + ranges = kmalloc_array(nr_range, sizeof(*ranges), GFP_KERNEL); > > + > > + for (id = 0 ; id < nr_range; id++) { > > + ret = nvmet_copy_from_sgl(req, id * sizeof(range), > > + &range, sizeof(range)); > > + if (ret) > > + goto out; > > + > > + ranges[id].dst = dest + dest_off; > > + ranges[id].src = le64_to_cpu(range.slba) << > > + req->ns->blksize_shift; > > + ranges[id].len = (le16_to_cpu(range.nlb) + 1) << > > + req->ns->blksize_shift; > > + ranges[id].comp_len = 0; > > + dest_off += ranges[id].len; > > + } > > + req->ranges = ranges; > > + req->nr_range = nr_range; > > + ret = blkdev_issue_copy(req->ns->bdev, req->ns->bdev, ranges, nr_range, > > + nvmet_bdev_copy_end_io, (void *)req, GFP_KERNEL); > > + if (ret) { > > + for (id = 0 ; id < nr_range; id++) { > > + if (ranges[id].len != ranges[id].comp_len) { > > + req->cqe->result.u32 = cpu_to_le32(id); > > + break; > > + } > > + } > > + goto out; > > + } else > > + return; > > +out: > > + kfree(ranges); > > + nvmet_req_complete(req, errno_to_nvme_status(req, ret)); > > +} > > + > > u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) > > { > > switch (req->cmd->common.opcode) { > > @@ -468,6 +543,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) > > case nvme_cmd_write_zeroes: > > req->execute = nvmet_bdev_execute_write_zeroes; > > return 0; > > + case nvme_cmd_copy: > > + req->execute = nvmet_bdev_execute_copy; > > + return 0; > > + > > default: > > return nvmet_report_invalid_opcode(req); > > } > > diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c > > index 64b47e2a4633..a81d38796e17 100644 > > --- a/drivers/nvme/target/io-cmd-file.c > > +++ b/drivers/nvme/target/io-cmd-file.c > > @@ -338,6 +338,48 @@ static void nvmet_file_dsm_work(struct work_struct *w) > > } > > } > > +static void nvmet_file_copy_work(struct work_struct *w) > > +{ > > + struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); > > + int nr_range; > > + loff_t pos; > > + struct nvme_command *cmnd = req->cmd; > > + int ret = 0, len = 0, src, id; > > + > > + nr_range = cmnd->copy.nr_range + 1; > > + pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift; > > + if (unlikely(pos + req->transfer_len > req->ns->size)) { > > + nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC)); > > + return; > > + } > > + > > + for (id = 0 ; id < nr_range; id++) { > > + struct nvme_copy_range range; > > + > > + ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range, > > + sizeof(range)); > > + if (ret) > > + goto out; > > + > > + len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift); > > + src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift)); > > + ret = vfs_copy_file_range(req->ns->file, src, req->ns->file, > > + pos, len, 0); > > +out: > > + if (ret != len) { > > + pos += ret; > > + req->cqe->result.u32 = cpu_to_le32(id); > > + nvmet_req_complete(req, ret < 0 ? > > + errno_to_nvme_status(req, ret) : > > + errno_to_nvme_status(req, -EIO)); > > + return; > > + > > + } else > > + pos += len; > > +} > > + nvmet_req_complete(req, ret); > > + > > +} > > static void nvmet_file_execute_dsm(struct nvmet_req *req) > > { > > if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req))) > > @@ -346,6 +388,12 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req) > > queue_work(nvmet_wq, &req->f.work); > > } > > +static void nvmet_file_execute_copy(struct nvmet_req *req) > > +{ > > + INIT_WORK(&req->f.work, nvmet_file_copy_work); > > + queue_work(nvmet_wq, &req->f.work); > > +} > > + > > static void nvmet_file_write_zeroes_work(struct work_struct *w) > > { > > struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); > > @@ -392,6 +440,9 @@ u16 nvmet_file_parse_io_cmd(struct nvmet_req *req) > > case nvme_cmd_write_zeroes: > > req->execute = nvmet_file_execute_write_zeroes; > > return 0; > > + case nvme_cmd_copy: > > + req->execute = nvmet_file_execute_copy; > > + return 0; > > default: > > return nvmet_report_invalid_opcode(req); > > } > > diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c > > index b45fe3adf015..55802632b407 100644 > > --- a/drivers/nvme/target/loop.c > > +++ b/drivers/nvme/target/loop.c > > @@ -146,6 +146,12 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx, > > return ret; > > blk_mq_start_request(req); > > + if (unlikely((req->cmd_flags & REQ_COPY) && > > + (req_op(req) == REQ_OP_READ))) { > > + blk_mq_set_request_complete(req); > > + blk_mq_end_request(req, BLK_STS_OK); > > + return BLK_STS_OK; > > + } > > iod->cmd.common.flags |= NVME_CMD_SGL_METABUF; > > iod->req.port = queue->ctrl->port; > > if (!nvmet_req_init(&iod->req, &queue->nvme_cq, > > diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h > > index dfe3894205aa..3b4c7d2ee45d 100644 > > --- a/drivers/nvme/target/nvmet.h > > +++ b/drivers/nvme/target/nvmet.h > > @@ -391,6 +391,8 @@ struct nvmet_req { > > struct device *p2p_client; > > u16 error_loc; > > u64 error_slba; > > + struct range_entry *ranges; > > + unsigned int nr_range; > > }; > > extern struct workqueue_struct *buffered_io_wq; [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns @ 2022-11-23 9:39 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 9:39 UTC (permalink / raw) To: Guixin Liu Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty [-- Attachment #1: Type: text/plain, Size: 10550 bytes --] On Wed, Nov 23, 2022 at 04:17:41PM +0800, Guixin Liu wrote: > > 在 2022/11/23 13:58, Nitesh Shetty 写道: > > Add support for handling target command on target. > > For bdev-ns we call into blkdev_issue_copy, which the block layer > > completes by a offloaded copy request to backend bdev or by emulating the > > request. > > > > For file-ns we call vfs_copy_file_range to service our request. > > > > Currently target always shows copy capability by setting > > NVME_CTRL_ONCS_COPY in controller ONCS. > > > > Signed-off-by: Nitesh Shetty<nj.shetty@samsung.com> > > Signed-off-by: Anuj Gupta<anuj20.g@samsung.com> > > --- > > drivers/nvme/target/admin-cmd.c | 9 +++- > > drivers/nvme/target/io-cmd-bdev.c | 79 +++++++++++++++++++++++++++++++ > > drivers/nvme/target/io-cmd-file.c | 51 ++++++++++++++++++++ > > drivers/nvme/target/loop.c | 6 +++ > > drivers/nvme/target/nvmet.h | 2 + > > 5 files changed, 145 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c > > index c8a061ce3ee5..5ae509ff4b19 100644 > > --- a/drivers/nvme/target/admin-cmd.c > > +++ b/drivers/nvme/target/admin-cmd.c > > @@ -431,8 +431,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req) > > id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES); > > id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES); > > id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM | > > - NVME_CTRL_ONCS_WRITE_ZEROES); > > - > > + NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY); > > /* XXX: don't report vwc if the underlying device is write through */ > > id->vwc = NVME_CTRL_VWC_PRESENT; > > @@ -534,6 +533,12 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req) > > if (req->ns->bdev) > > nvmet_bdev_set_limits(req->ns->bdev, id); > > + else { > > + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); > > + id->mssrl = cpu_to_le16(BIO_MAX_VECS << > > + (PAGE_SHIFT - SECTOR_SHIFT)); > > + id->mcl = cpu_to_le32(le16_to_cpu(id->mssrl)); > > + } > > /* > > * We just provide a single LBA format that matches what the > > diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c > > index c2d6cea0236b..01f0160125fb 100644 > > --- a/drivers/nvme/target/io-cmd-bdev.c > > +++ b/drivers/nvme/target/io-cmd-bdev.c > > @@ -46,6 +46,19 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id) > > id->npda = id->npdg; > > /* NOWS = Namespace Optimal Write Size */ > > id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev)); > > + > > + /*Copy limits*/ > > + if (bdev_max_copy_sectors(bdev)) { > > + id->msrc = id->msrc; > > + id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) << > > + SECTOR_SHIFT) / bdev_logical_block_size(bdev)); > > + id->mcl = cpu_to_le32(id->mssrl); > > + } else { > > + id->msrc = (u8)to0based(BIO_MAX_VECS - 1); > > + id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) / > > + bdev_logical_block_size(bdev)); > > + id->mcl = cpu_to_le32(id->mssrl); > > + } > > Based on my understanding of the NVMe protocol 2.0, the mssrl is the max > length per single range entry, > > the mcl is the total max copy length in one copy command, may I ask why mcl > = msssrl? not mcl = mssrl * msrc? > > Best Regards, > > Guixin Liu > You are right, as per NVMe spec, mcl >= mssrl. Since we decided to make copy offload generic for NVMe/Xcopy/copy across namespaces and all, we went with 2 bio/bdev design, which is compatible with device mapper. So effectively we are using 1 range(msrc), when using only 1 range, I feel it makes sense to use one of the limits, so went with mssrl. Thanks, Nitesh > > } > > void nvmet_bdev_ns_disable(struct nvmet_ns *ns) > > @@ -184,6 +197,23 @@ static void nvmet_bio_done(struct bio *bio) > > nvmet_req_bio_put(req, bio); > > } > > +static void nvmet_bdev_copy_end_io(void *private, int status) > > +{ > > + struct nvmet_req *req = (struct nvmet_req *)private; > > + int id; > > + > > + if (status) { > > + for (id = 0 ; id < req->nr_range; id++) { > > + if (req->ranges[id].len != req->ranges[id].comp_len) { > > + req->cqe->result.u32 = cpu_to_le32(id); > > + break; > > + } > > + } > > + } > > + kfree(req->ranges); > > + nvmet_req_complete(req, errno_to_nvme_status(req, status)); > > +} > > + > > #ifdef CONFIG_BLK_DEV_INTEGRITY > > static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio, > > struct sg_mapping_iter *miter) > > @@ -450,6 +480,51 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req) > > } > > } > > +static void nvmet_bdev_execute_copy(struct nvmet_req *req) > > +{ > > + struct nvme_copy_range range; > > + struct range_entry *ranges; > > + struct nvme_command *cmnd = req->cmd; > > + sector_t dest, dest_off = 0; > > + int ret, id, nr_range; > > + > > + nr_range = cmnd->copy.nr_range + 1; > > + dest = le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift; > > + ranges = kmalloc_array(nr_range, sizeof(*ranges), GFP_KERNEL); > > + > > + for (id = 0 ; id < nr_range; id++) { > > + ret = nvmet_copy_from_sgl(req, id * sizeof(range), > > + &range, sizeof(range)); > > + if (ret) > > + goto out; > > + > > + ranges[id].dst = dest + dest_off; > > + ranges[id].src = le64_to_cpu(range.slba) << > > + req->ns->blksize_shift; > > + ranges[id].len = (le16_to_cpu(range.nlb) + 1) << > > + req->ns->blksize_shift; > > + ranges[id].comp_len = 0; > > + dest_off += ranges[id].len; > > + } > > + req->ranges = ranges; > > + req->nr_range = nr_range; > > + ret = blkdev_issue_copy(req->ns->bdev, req->ns->bdev, ranges, nr_range, > > + nvmet_bdev_copy_end_io, (void *)req, GFP_KERNEL); > > + if (ret) { > > + for (id = 0 ; id < nr_range; id++) { > > + if (ranges[id].len != ranges[id].comp_len) { > > + req->cqe->result.u32 = cpu_to_le32(id); > > + break; > > + } > > + } > > + goto out; > > + } else > > + return; > > +out: > > + kfree(ranges); > > + nvmet_req_complete(req, errno_to_nvme_status(req, ret)); > > +} > > + > > u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) > > { > > switch (req->cmd->common.opcode) { > > @@ -468,6 +543,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) > > case nvme_cmd_write_zeroes: > > req->execute = nvmet_bdev_execute_write_zeroes; > > return 0; > > + case nvme_cmd_copy: > > + req->execute = nvmet_bdev_execute_copy; > > + return 0; > > + > > default: > > return nvmet_report_invalid_opcode(req); > > } > > diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c > > index 64b47e2a4633..a81d38796e17 100644 > > --- a/drivers/nvme/target/io-cmd-file.c > > +++ b/drivers/nvme/target/io-cmd-file.c > > @@ -338,6 +338,48 @@ static void nvmet_file_dsm_work(struct work_struct *w) > > } > > } > > +static void nvmet_file_copy_work(struct work_struct *w) > > +{ > > + struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); > > + int nr_range; > > + loff_t pos; > > + struct nvme_command *cmnd = req->cmd; > > + int ret = 0, len = 0, src, id; > > + > > + nr_range = cmnd->copy.nr_range + 1; > > + pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift; > > + if (unlikely(pos + req->transfer_len > req->ns->size)) { > > + nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC)); > > + return; > > + } > > + > > + for (id = 0 ; id < nr_range; id++) { > > + struct nvme_copy_range range; > > + > > + ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range, > > + sizeof(range)); > > + if (ret) > > + goto out; > > + > > + len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift); > > + src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift)); > > + ret = vfs_copy_file_range(req->ns->file, src, req->ns->file, > > + pos, len, 0); > > +out: > > + if (ret != len) { > > + pos += ret; > > + req->cqe->result.u32 = cpu_to_le32(id); > > + nvmet_req_complete(req, ret < 0 ? > > + errno_to_nvme_status(req, ret) : > > + errno_to_nvme_status(req, -EIO)); > > + return; > > + > > + } else > > + pos += len; > > +} > > + nvmet_req_complete(req, ret); > > + > > +} > > static void nvmet_file_execute_dsm(struct nvmet_req *req) > > { > > if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req))) > > @@ -346,6 +388,12 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req) > > queue_work(nvmet_wq, &req->f.work); > > } > > +static void nvmet_file_execute_copy(struct nvmet_req *req) > > +{ > > + INIT_WORK(&req->f.work, nvmet_file_copy_work); > > + queue_work(nvmet_wq, &req->f.work); > > +} > > + > > static void nvmet_file_write_zeroes_work(struct work_struct *w) > > { > > struct nvmet_req *req = container_of(w, struct nvmet_req, f.work); > > @@ -392,6 +440,9 @@ u16 nvmet_file_parse_io_cmd(struct nvmet_req *req) > > case nvme_cmd_write_zeroes: > > req->execute = nvmet_file_execute_write_zeroes; > > return 0; > > + case nvme_cmd_copy: > > + req->execute = nvmet_file_execute_copy; > > + return 0; > > default: > > return nvmet_report_invalid_opcode(req); > > } > > diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c > > index b45fe3adf015..55802632b407 100644 > > --- a/drivers/nvme/target/loop.c > > +++ b/drivers/nvme/target/loop.c > > @@ -146,6 +146,12 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx, > > return ret; > > blk_mq_start_request(req); > > + if (unlikely((req->cmd_flags & REQ_COPY) && > > + (req_op(req) == REQ_OP_READ))) { > > + blk_mq_set_request_complete(req); > > + blk_mq_end_request(req, BLK_STS_OK); > > + return BLK_STS_OK; > > + } > > iod->cmd.common.flags |= NVME_CMD_SGL_METABUF; > > iod->req.port = queue->ctrl->port; > > if (!nvmet_req_init(&iod->req, &queue->nvme_cq, > > diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h > > index dfe3894205aa..3b4c7d2ee45d 100644 > > --- a/drivers/nvme/target/nvmet.h > > +++ b/drivers/nvme/target/nvmet.h > > @@ -391,6 +391,8 @@ struct nvmet_req { > > struct device *p2p_client; > > u16 error_loc; > > u64 error_slba; > > + struct range_entry *ranges; > > + unsigned int nr_range; > > }; > > extern struct workqueue_struct *buffered_io_wq; [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns 2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty @ 2022-12-06 9:22 ` kernel test robot -1 siblings, 0 replies; 67+ messages in thread From: kernel test robot @ 2022-12-06 9:22 UTC (permalink / raw) To: Nitesh Shetty, axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: oe-kbuild-all, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty [-- Attachment #1: Type: text/plain, Size: 5841 bytes --] Hi Nitesh, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on axboe-block/for-next] [also build test WARNING on next-20221206] [cannot apply to device-mapper-dm/for-next linus/master v6.1-rc8] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Nitesh-Shetty/block-Introduce-queue-limits-for-copy-offload-support/20221123-145837 base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next patch link: https://lore.kernel.org/r/20221123055827.26996-7-nj.shetty%40samsung.com patch subject: [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns config: openrisc-randconfig-s041-20221205 compiler: or1k-linux-gcc (GCC) 12.1.0 reproduce: wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # apt-get install sparse # sparse version: v0.6.4-39-gce1a6720-dirty # https://github.com/intel-lab-lkp/linux/commit/2696a8eeb2e224871e7c183660baea9d87f4fb71 git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Nitesh-Shetty/block-Introduce-queue-limits-for-copy-offload-support/20221123-145837 git checkout 2696a8eeb2e224871e7c183660baea9d87f4fb71 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=openrisc SHELL=/bin/bash drivers/nvme/target/ If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <lkp@intel.com> sparse warnings: (new ones prefixed by >>) >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: incorrect type in argument 1 (different base types) @@ expected unsigned int [usertype] val @@ got restricted __le16 [usertype] mssrl @@ drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: expected unsigned int [usertype] val drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: got restricted __le16 [usertype] mssrl >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: cast from restricted __le16 >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: cast from restricted __le16 >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: cast from restricted __le16 >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:57:29: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: incorrect type in argument 1 (different base types) @@ expected unsigned int [usertype] val @@ got restricted __le16 [usertype] mssrl @@ drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: expected unsigned int [usertype] val drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: got restricted __le16 [usertype] mssrl drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: cast from restricted __le16 vim +55 drivers/nvme/target/io-cmd-bdev.c 12 13 void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id) 14 { 15 /* Logical blocks per physical block, 0's based. */ 16 const __le16 lpp0b = to0based(bdev_physical_block_size(bdev) / 17 bdev_logical_block_size(bdev)); 18 19 /* 20 * For NVMe 1.2 and later, bit 1 indicates that the fields NAWUN, 21 * NAWUPF, and NACWU are defined for this namespace and should be 22 * used by the host for this namespace instead of the AWUN, AWUPF, 23 * and ACWU fields in the Identify Controller data structure. If 24 * any of these fields are zero that means that the corresponding 25 * field from the identify controller data structure should be used. 26 */ 27 id->nsfeat |= 1 << 1; 28 id->nawun = lpp0b; 29 id->nawupf = lpp0b; 30 id->nacwu = lpp0b; 31 32 /* 33 * Bit 4 indicates that the fields NPWG, NPWA, NPDG, NPDA, and 34 * NOWS are defined for this namespace and should be used by 35 * the host for I/O optimization. 36 */ 37 id->nsfeat |= 1 << 4; 38 /* NPWG = Namespace Preferred Write Granularity. 0's based */ 39 id->npwg = lpp0b; 40 /* NPWA = Namespace Preferred Write Alignment. 0's based */ 41 id->npwa = id->npwg; 42 /* NPDG = Namespace Preferred Deallocate Granularity. 0's based */ 43 id->npdg = to0based(bdev_discard_granularity(bdev) / 44 bdev_logical_block_size(bdev)); 45 /* NPDG = Namespace Preferred Deallocate Alignment */ 46 id->npda = id->npdg; 47 /* NOWS = Namespace Optimal Write Size */ 48 id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev)); 49 50 /*Copy limits*/ 51 if (bdev_max_copy_sectors(bdev)) { 52 id->msrc = id->msrc; 53 id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) << 54 SECTOR_SHIFT) / bdev_logical_block_size(bdev)); > 55 id->mcl = cpu_to_le32(id->mssrl); 56 } else { 57 id->msrc = (u8)to0based(BIO_MAX_VECS - 1); 58 id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) / 59 bdev_logical_block_size(bdev)); 60 id->mcl = cpu_to_le32(id->mssrl); 61 } 62 } 63 -- 0-DAY CI Kernel Test Service https://01.org/lkp [-- Attachment #2: config --] [-- Type: text/plain, Size: 190021 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/openrisc 6.1.0-rc6 Kernel Configuration # CONFIG_CC_VERSION_TEXT="or1k-linux-gcc (GCC) 12.1.0" CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=120100 CONFIG_CLANG_VERSION=0 CONFIG_AS_IS_GNU=y CONFIG_AS_VERSION=23800 CONFIG_LD_IS_BFD=y CONFIG_LD_VERSION=23800 CONFIG_LLD_VERSION=0 CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y CONFIG_PAHOLE_VERSION=123 CONFIG_IRQ_WORK=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_COMPILE_TEST=y # CONFIG_WERROR is not set CONFIG_LOCALVERSION="" CONFIG_BUILD_SALT="" CONFIG_DEFAULT_INIT="" CONFIG_DEFAULT_HOSTNAME="(none)" # CONFIG_SYSVIPC is not set CONFIG_POSIX_MQUEUE=y CONFIG_WATCH_QUEUE=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_USELIB=y # CONFIG_AUDIT is not set # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_INJECTION=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_SIM=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_GENERIC_MSI_IRQ_DOMAIN=y CONFIG_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_DEBUGFS=y # end of IRQ subsystem CONFIG_GENERIC_IRQ_MULTI_HANDLER=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_TIME_KUNIT_TEST=y CONFIG_CONTEXT_TRACKING=y CONFIG_CONTEXT_TRACKING_IDLE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # end of Timers subsystem CONFIG_BPF=y # # BPF subsystem # CONFIG_BPF_SYSCALL=y CONFIG_BPF_UNPRIV_DEFAULT_OFF=y # end of BPF subsystem CONFIG_PREEMPT_NONE_BUILD=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_PREEMPT_COUNT=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_TASKSTATS=y # CONFIG_TASK_DELAY_ACCT is not set CONFIG_TASK_XACCT=y # CONFIG_TASK_IO_ACCOUNTING is not set # CONFIG_PSI is not set # end of CPU/Task time and stats accounting CONFIG_CPU_ISOLATION=y # # RCU Subsystem # CONFIG_TREE_RCU=y CONFIG_RCU_EXPERT=y CONFIG_SRCU=y CONFIG_TREE_SRCU=y CONFIG_TASKS_RCU_GENERIC=y # CONFIG_FORCE_TASKS_RCU is not set CONFIG_FORCE_TASKS_RUDE_RCU=y CONFIG_TASKS_RUDE_RCU=y CONFIG_FORCE_TASKS_TRACE_RCU=y CONFIG_TASKS_TRACE_RCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_NEED_SEGCBLIST=y CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_NOCB_CPU is not set CONFIG_TASKS_TRACE_RCU_READ_MB=y # end of RCU Subsystem CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_IKHEADERS is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 CONFIG_PRINTK_INDEX=y # # Scheduler features # # end of Scheduler features CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC12_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=y CONFIG_CGROUPS=y CONFIG_PAGE_COUNTER=y CONFIG_CGROUP_FAVOR_DYNMODS=y CONFIG_MEMCG=y CONFIG_MEMCG_KMEM=y # CONFIG_BLK_CGROUP is not set CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y # CONFIG_RT_GROUP_SCHED is not set # CONFIG_CGROUP_PIDS is not set # CONFIG_CGROUP_RDMA is not set CONFIG_CGROUP_FREEZER=y CONFIG_CPUSETS=y # CONFIG_PROC_PID_CPUSET is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CGROUP_CPUACCT is not set # CONFIG_CGROUP_BPF is not set CONFIG_CGROUP_MISC=y CONFIG_CGROUP_DEBUG=y CONFIG_SOCK_CGROUP_DATA=y # CONFIG_NAMESPACES is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_BOOT_CONFIG=y CONFIG_BOOT_CONFIG_EMBED=y CONFIG_BOOT_CONFIG_EMBED_FILE="" # CONFIG_INITRAMFS_PRESERVE_MTIME is not set CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_HAVE_UID16=y CONFIG_EXPERT=y CONFIG_UID16=y CONFIG_MULTIUSER=y CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y # CONFIG_BUG is not set # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_IO_URING=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_KCMP=y CONFIG_EMBEDDED=y CONFIG_PC104=y # # Kernel Performance Events And Counters # # end of Kernel Performance Events And Counters CONFIG_SYSTEM_DATA_VERIFICATION=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y # end of General setup CONFIG_OPENRISC=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_MMU=y CONFIG_GENERIC_HWEIGHT=y CONFIG_NO_IOPORT_MAP=y CONFIG_GENERIC_CSUM=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # # Processor type and features # CONFIG_OR1K_1200=y # CONFIG_DCACHE_WRITETHROUGH is not set CONFIG_OPENRISC_BUILTIN_DTB="" # # Class II Instructions # CONFIG_OPENRISC_HAVE_INST_FF1=y # CONFIG_OPENRISC_HAVE_INST_FL1 is not set # CONFIG_OPENRISC_HAVE_INST_MUL is not set CONFIG_OPENRISC_HAVE_INST_DIV=y CONFIG_OPENRISC_HAVE_INST_CMOV=y CONFIG_OPENRISC_HAVE_INST_ROR=y # CONFIG_OPENRISC_HAVE_INST_RORI is not set # CONFIG_OPENRISC_HAVE_INST_SEXT is not set # end of Class II Instructions CONFIG_NR_CPUS=2 CONFIG_SMP=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y CONFIG_OPENRISC_NO_SPR_SR_DSX=y CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y CONFIG_CMDLINE="" # # Debugging options # # CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION is not set # CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK is not set # end of Debugging options # end of Processor type and features # # General architecture-dependent options # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_DMA_SET_UNCACHED=y CONFIG_ARCH_HAS_DMA_CLEAR_UNCACHED=y CONFIG_ARCH_32BIT_OFF_T=y CONFIG_MMU_GATHER_NO_RANGE=y CONFIG_MMU_GATHER_MERGE_VMAS=y CONFIG_LTO_NONE=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_PGTABLE_LEVELS=2 CONFIG_PAGE_SIZE_LESS_THAN_64KB=y CONFIG_PAGE_SIZE_LESS_THAN_256KB=y CONFIG_COMPAT_32BIT_TIME=y # CONFIG_LOCK_EVENT_COUNTS is not set # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # end of GCOV-based kernel profiling # end of General architecture-dependent options CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_BLOCK_LEGACY_AUTOLOAD is not set CONFIG_BLK_ICQ=y # CONFIG_BLK_DEV_BSGLIB is not set # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLK_DEV_ZONED=y # CONFIG_BLK_WBT is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_BLK_SED_OPAL is not set CONFIG_BLK_INLINE_ENCRYPTION=y CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y CONFIG_ACORN_PARTITION_CUMANA=y CONFIG_ACORN_PARTITION_EESOX=y CONFIG_ACORN_PARTITION_ICS=y CONFIG_ACORN_PARTITION_ADFS=y # CONFIG_ACORN_PARTITION_POWERTEC is not set # CONFIG_ACORN_PARTITION_RISCIX is not set CONFIG_AIX_PARTITION=y CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set CONFIG_ATARI_PARTITION=y # CONFIG_MAC_PARTITION is not set # CONFIG_MSDOS_PARTITION is not set # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set # end of Partition Types CONFIG_BLK_MQ_PCI=y CONFIG_BLK_MQ_VIRTIO=y CONFIG_BLOCK_HOLDER_DEPRECATED=y CONFIG_BLK_MQ_STACKING=y # # IO Schedulers # CONFIG_MQ_IOSCHED_DEADLINE=y CONFIG_MQ_IOSCHED_KYBER=y CONFIG_IOSCHED_BFQ=y # end of IO Schedulers CONFIG_PADATA=y CONFIG_ASN1=y CONFIG_UNINLINE_SPIN_UNLOCK=y CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_FREEZER=y # # Executable file formats # # CONFIG_BINFMT_ELF is not set CONFIG_BINFMT_SCRIPT=y # CONFIG_BINFMT_MISC is not set # CONFIG_COREDUMP is not set # end of Executable file formats # # Memory Management options # # CONFIG_SWAP is not set # # SLAB allocator options # # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLAB_MERGE_DEFAULT=y # CONFIG_SLAB_FREELIST_RANDOM is not set CONFIG_SLAB_FREELIST_HARDENED=y CONFIG_SLUB_STATS=y CONFIG_SLUB_CPU_PARTIAL=y # end of SLAB allocator options CONFIG_SHUFFLE_PAGE_ALLOCATOR=y # CONFIG_COMPAT_BRK is not set CONFIG_FLATMEM=y CONFIG_MEMORY_ISOLATION=y CONFIG_EXCLUSIVE_SYSTEM_RAM=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 # CONFIG_PAGE_REPORTING is not set CONFIG_MIGRATION=y CONFIG_CONTIG_ALLOC=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_CMA=y # CONFIG_CMA_DEBUG is not set # CONFIG_CMA_DEBUGFS is not set CONFIG_CMA_SYSFS=y CONFIG_CMA_AREAS=7 CONFIG_PAGE_IDLE_FLAG=y CONFIG_IDLE_PAGE_TRACKING=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PERCPU_STATS=y CONFIG_GUP_TEST=y CONFIG_ANON_VMA_NAME=y CONFIG_USERFAULTFD=y CONFIG_LRU_GEN=y # CONFIG_LRU_GEN_ENABLED is not set CONFIG_LRU_GEN_STATS=y # # Data Access Monitoring # # CONFIG_DAMON is not set # end of Data Access Monitoring # end of Memory Management options CONFIG_NET=y CONFIG_NET_INGRESS=y CONFIG_NET_EGRESS=y CONFIG_SKB_EXTENSIONS=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_DIAG=y CONFIG_UNIX=y CONFIG_UNIX_SCM=y CONFIG_AF_UNIX_OOB=y CONFIG_UNIX_DIAG=y # CONFIG_TLS is not set CONFIG_XFRM=y CONFIG_XFRM_OFFLOAD=y CONFIG_XFRM_ALGO=y # CONFIG_XFRM_USER is not set CONFIG_XFRM_INTERFACE=y CONFIG_XFRM_SUB_POLICY=y # CONFIG_XFRM_MIGRATE is not set CONFIG_XFRM_STATISTICS=y CONFIG_XFRM_ESP=y CONFIG_XFRM_IPCOMP=y # CONFIG_NET_KEY is not set CONFIG_XDP_SOCKETS=y CONFIG_XDP_SOCKETS_DIAG=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_ROUTE_CLASSID=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=y CONFIG_NET_IPGRE_DEMUX=y CONFIG_NET_IP_TUNNEL=y CONFIG_NET_IPGRE=y # CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set # CONFIG_SYN_COOKIES is not set CONFIG_NET_IPVTI=y CONFIG_NET_UDP_TUNNEL=y CONFIG_NET_FOU=y CONFIG_NET_FOU_IP_TUNNELS=y # CONFIG_INET_AH is not set CONFIG_INET_ESP=y CONFIG_INET_ESP_OFFLOAD=y # CONFIG_INET_ESPINTCP is not set CONFIG_INET_IPCOMP=y CONFIG_INET_TABLE_PERTURB_ORDER=16 CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y # CONFIG_IPV6_ROUTER_PREF is not set CONFIG_IPV6_OPTIMISTIC_DAD=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set CONFIG_INET6_IPCOMP=y # CONFIG_IPV6_MIP6 is not set CONFIG_IPV6_ILA=y CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y CONFIG_IPV6_VTI=y CONFIG_IPV6_SIT=y # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=y # CONFIG_IPV6_GRE is not set CONFIG_IPV6_FOU=y CONFIG_IPV6_FOU_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y # CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MROUTE is not set CONFIG_IPV6_SEG6_LWTUNNEL=y CONFIG_IPV6_SEG6_HMAC=y CONFIG_IPV6_SEG6_BPF=y CONFIG_IPV6_RPL_LWTUNNEL=y CONFIG_IPV6_IOAM6_LWTUNNEL=y CONFIG_MPTCP=y # CONFIG_MPTCP_IPV6 is not set CONFIG_MPTCP_KUNIT_TEST=y CONFIG_NETWORK_SECMARK=y CONFIG_NET_PTP_CLASSIFY=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_ADVANCED is not set # # Core Netfilter Configuration # # CONFIG_NETFILTER_INGRESS is not set CONFIG_NETFILTER_EGRESS=y CONFIG_NETFILTER_SKIP_EGRESS=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_LOG=y # CONFIG_NF_CONNTRACK is not set CONFIG_NF_LOG_SYSLOG=y # CONFIG_NF_TABLES is not set CONFIG_NETFILTER_XTABLES=y # # Xtables combined modules # CONFIG_NETFILTER_XT_MARK=y # # Xtables targets # CONFIG_NETFILTER_XT_TARGET_LOG=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y # CONFIG_NETFILTER_XT_TARGET_SECMARK is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=y # # Xtables matches # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # end of Core Netfilter Configuration # CONFIG_IP_SET is not set CONFIG_IP_VS=y CONFIG_IP_VS_IPV6=y CONFIG_IP_VS_DEBUG=y CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # # CONFIG_IP_VS_PROTO_TCP is not set CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_AH_ESP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y # CONFIG_IP_VS_PROTO_SCTP is not set # # IPVS scheduler # CONFIG_IP_VS_RR=y # CONFIG_IP_VS_WRR is not set CONFIG_IP_VS_LC=y CONFIG_IP_VS_WLC=y # CONFIG_IP_VS_FO is not set CONFIG_IP_VS_OVF=y CONFIG_IP_VS_LBLC=y # CONFIG_IP_VS_LBLCR is not set CONFIG_IP_VS_DH=y CONFIG_IP_VS_SH=y # CONFIG_IP_VS_MH is not set CONFIG_IP_VS_SED=y CONFIG_IP_VS_NQ=y CONFIG_IP_VS_TWOS=y # # IPVS SH scheduler # CONFIG_IP_VS_SH_TAB_BITS=8 # # IPVS MH scheduler # CONFIG_IP_VS_MH_TAB_INDEX=12 # # IPVS application helper # # # IP: Netfilter Configuration # CONFIG_NF_SOCKET_IPV4=y CONFIG_NF_TPROXY_IPV4=y CONFIG_NF_DUP_IPV4=y CONFIG_NF_LOG_ARP=y CONFIG_NF_LOG_IPV4=y CONFIG_NF_REJECT_IPV4=y # CONFIG_IP_NF_IPTABLES is not set # end of IP: Netfilter Configuration # # IPv6: Netfilter Configuration # # CONFIG_NF_SOCKET_IPV6 is not set CONFIG_NF_TPROXY_IPV6=y CONFIG_NF_DUP_IPV6=y CONFIG_NF_REJECT_IPV6=y CONFIG_NF_LOG_IPV6=y CONFIG_IP6_NF_IPTABLES=y CONFIG_IP6_NF_MATCH_IPV6HEADER=y CONFIG_IP6_NF_FILTER=y # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=y CONFIG_IP6_NF_RAW=y # end of IPv6: Netfilter Configuration CONFIG_NF_DEFRAG_IPV6=y # CONFIG_BPFILTER is not set CONFIG_IP_DCCP=y # # DCCP CCIDs Configuration # # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=y CONFIG_IP_DCCP_CCID3_DEBUG=y CONFIG_IP_DCCP_TFRC_LIB=y CONFIG_IP_DCCP_TFRC_DEBUG=y # end of DCCP CCIDs Configuration # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set # end of DCCP Kernel Hacking CONFIG_IP_SCTP=y CONFIG_SCTP_DBG_OBJCNT=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE=y CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y # CONFIG_RDS is not set # CONFIG_TIPC is not set CONFIG_ATM=y # CONFIG_ATM_CLIP is not set CONFIG_ATM_LANE=y CONFIG_ATM_MPOA=y CONFIG_ATM_BR2684=y # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=y CONFIG_L2TP_DEBUGFS=y CONFIG_L2TP_V3=y # CONFIG_L2TP_IP is not set CONFIG_L2TP_ETH=y # CONFIG_BRIDGE is not set CONFIG_NET_DSA=y CONFIG_NET_DSA_TAG_AR9331=y CONFIG_NET_DSA_TAG_BRCM_COMMON=y CONFIG_NET_DSA_TAG_BRCM=y CONFIG_NET_DSA_TAG_BRCM_LEGACY=y CONFIG_NET_DSA_TAG_BRCM_PREPEND=y CONFIG_NET_DSA_TAG_HELLCREEK=y CONFIG_NET_DSA_TAG_GSWIP=y CONFIG_NET_DSA_TAG_DSA_COMMON=y CONFIG_NET_DSA_TAG_DSA=y CONFIG_NET_DSA_TAG_EDSA=y CONFIG_NET_DSA_TAG_MTK=y # CONFIG_NET_DSA_TAG_KSZ is not set # CONFIG_NET_DSA_TAG_OCELOT is not set # CONFIG_NET_DSA_TAG_OCELOT_8021Q is not set CONFIG_NET_DSA_TAG_QCA=y # CONFIG_NET_DSA_TAG_RTL4_A is not set CONFIG_NET_DSA_TAG_RTL8_4=y # CONFIG_NET_DSA_TAG_RZN1_A5PSW is not set CONFIG_NET_DSA_TAG_LAN9303=y # CONFIG_NET_DSA_TAG_SJA1105 is not set CONFIG_NET_DSA_TAG_TRAILER=y CONFIG_NET_DSA_TAG_XRS700X=y # CONFIG_VLAN_8021Q is not set CONFIG_LLC=y CONFIG_LLC2=y CONFIG_ATALK=y CONFIG_DEV_APPLETALK=y # CONFIG_IPDDP is not set # CONFIG_X25 is not set CONFIG_LAPB=y # CONFIG_PHONET is not set CONFIG_6LOWPAN=y # CONFIG_6LOWPAN_DEBUGFS is not set # CONFIG_6LOWPAN_NHC is not set CONFIG_IEEE802154=y CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y CONFIG_IEEE802154_SOCKET=y CONFIG_IEEE802154_6LOWPAN=y # CONFIG_MAC802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_ATM is not set CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFB=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y # CONFIG_NET_SCH_TBF is not set CONFIG_NET_SCH_CBS=y CONFIG_NET_SCH_ETF=y CONFIG_NET_SCH_TAPRIO=y # CONFIG_NET_SCH_GRED is not set CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y CONFIG_NET_SCH_DRR=y # CONFIG_NET_SCH_MQPRIO is not set CONFIG_NET_SCH_SKBPRIO=y # CONFIG_NET_SCH_CHOKE is not set CONFIG_NET_SCH_QFQ=y # CONFIG_NET_SCH_CODEL is not set CONFIG_NET_SCH_FQ_CODEL=y CONFIG_NET_SCH_CAKE=y CONFIG_NET_SCH_FQ=y CONFIG_NET_SCH_HHF=y CONFIG_NET_SCH_PIE=y CONFIG_NET_SCH_FQ_PIE=y CONFIG_NET_SCH_INGRESS=y CONFIG_NET_SCH_PLUG=y # CONFIG_NET_SCH_ETS is not set CONFIG_NET_SCH_DEFAULT=y CONFIG_DEFAULT_FQ=y # CONFIG_DEFAULT_FQ_CODEL is not set # CONFIG_DEFAULT_FQ_PIE is not set # CONFIG_DEFAULT_SFQ is not set # CONFIG_DEFAULT_PFIFO_FAST is not set CONFIG_DEFAULT_NET_SCH="fq" # # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set # CONFIG_NET_CLS_TCINDEX is not set CONFIG_NET_CLS_ROUTE4=y # CONFIG_NET_CLS_FW is not set # CONFIG_NET_CLS_U32 is not set CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y CONFIG_NET_CLS_FLOW=y CONFIG_NET_CLS_CGROUP=y CONFIG_NET_CLS_BPF=y CONFIG_NET_CLS_FLOWER=y # CONFIG_NET_CLS_MATCHALL is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=y # CONFIG_NET_EMATCH_NBYTE is not set # CONFIG_NET_EMATCH_U32 is not set CONFIG_NET_EMATCH_META=y # CONFIG_NET_EMATCH_TEXT is not set CONFIG_NET_EMATCH_CANID=y CONFIG_NET_EMATCH_IPT=y CONFIG_NET_CLS_ACT=y # CONFIG_NET_ACT_POLICE is not set CONFIG_NET_ACT_GACT=y CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=y # CONFIG_NET_ACT_SAMPLE is not set CONFIG_NET_ACT_IPT=y CONFIG_NET_ACT_NAT=y CONFIG_NET_ACT_PEDIT=y CONFIG_NET_ACT_SIMP=y # CONFIG_NET_ACT_SKBEDIT is not set # CONFIG_NET_ACT_CSUM is not set CONFIG_NET_ACT_MPLS=y CONFIG_NET_ACT_VLAN=y CONFIG_NET_ACT_BPF=y CONFIG_NET_ACT_SKBMOD=y CONFIG_NET_ACT_IFE=y CONFIG_NET_ACT_TUNNEL_KEY=y CONFIG_NET_ACT_GATE=y # CONFIG_NET_IFE_SKBMARK is not set CONFIG_NET_IFE_SKBPRIO=y CONFIG_NET_IFE_SKBTCINDEX=y CONFIG_NET_TC_SKB_EXT=y CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_DIAG is not set # CONFIG_MPLS is not set CONFIG_NET_NSH=y CONFIG_HSR=y CONFIG_NET_SWITCHDEV=y # CONFIG_NET_L3_MASTER_DEV is not set # CONFIG_QRTR is not set # CONFIG_NET_NCSI is not set # CONFIG_PCPU_DEV_REFCNT is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_SOCK_RX_QUEUE_MAPPING=y CONFIG_XPS=y CONFIG_CGROUP_NET_PRIO=y CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options # CONFIG_HAMRADIO is not set CONFIG_CAN=y # CONFIG_CAN_RAW is not set CONFIG_CAN_BCM=y # CONFIG_CAN_GW is not set CONFIG_CAN_J1939=y CONFIG_CAN_ISOTP=y CONFIG_BT=y # CONFIG_BT_BREDR is not set # CONFIG_BT_LE is not set # CONFIG_BT_LEDS is not set CONFIG_BT_MSFTEXT=y CONFIG_BT_AOSPEXT=y # CONFIG_BT_DEBUGFS is not set # CONFIG_BT_SELFTEST is not set # # Bluetooth device drivers # # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set CONFIG_BT_HCIBFUSB=y CONFIG_BT_HCIVHCI=y CONFIG_BT_MRVL=y # CONFIG_BT_MTKUART is not set # CONFIG_BT_QCOMSMD is not set CONFIG_BT_VIRTIO=y # end of Bluetooth device drivers # CONFIG_AF_RXRPC is not set CONFIG_AF_KCM=y CONFIG_STREAM_PARSER=y CONFIG_MCTP=y CONFIG_MCTP_TEST=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # # CFG80211 needs to be enabled for MAC80211 # CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 CONFIG_RFKILL=y CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_GPIO=y CONFIG_NET_9P=y # CONFIG_NET_9P_FD is not set CONFIG_NET_9P_VIRTIO=y CONFIG_NET_9P_DEBUG=y # CONFIG_CAIF is not set CONFIG_CEPH_LIB=y # CONFIG_CEPH_LIB_PRETTYDEBUG is not set # CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set CONFIG_NFC=y CONFIG_NFC_DIGITAL=y CONFIG_NFC_NCI=y CONFIG_NFC_NCI_SPI=y CONFIG_NFC_HCI=y # CONFIG_NFC_SHDLC is not set # # Near Field Communication (NFC) devices # # CONFIG_NFC_TRF7970A is not set CONFIG_NFC_SIM=y # CONFIG_NFC_PORT100 is not set CONFIG_NFC_VIRTUAL_NCI=y # CONFIG_NFC_FDP is not set CONFIG_NFC_PN533=y CONFIG_NFC_PN533_USB=y CONFIG_NFC_PN533_I2C=y CONFIG_NFC_PN532_UART=y CONFIG_NFC_MRVL=y CONFIG_NFC_MRVL_USB=y CONFIG_NFC_MRVL_I2C=y CONFIG_NFC_MRVL_SPI=y CONFIG_NFC_ST_NCI=y # CONFIG_NFC_ST_NCI_I2C is not set CONFIG_NFC_ST_NCI_SPI=y CONFIG_NFC_NXP_NCI=y CONFIG_NFC_NXP_NCI_I2C=y CONFIG_NFC_S3FWRN5=y CONFIG_NFC_S3FWRN5_I2C=y CONFIG_NFC_S3FWRN82_UART=y # CONFIG_NFC_ST95HF is not set # end of Near Field Communication (NFC) devices CONFIG_PSAMPLE=y CONFIG_NET_IFE=y CONFIG_LWTUNNEL=y CONFIG_LWTUNNEL_BPF=y CONFIG_DST_CACHE=y CONFIG_GRO_CELLS=y CONFIG_NET_SELFTESTS=y CONFIG_NET_SOCK_MSG=y CONFIG_NET_DEVLINK=y CONFIG_PAGE_POOL=y # CONFIG_PAGE_POOL_STATS is not set CONFIG_FAILOVER=y CONFIG_ETHTOOL_NETLINK=y # CONFIG_NETDEV_ADDR_LIST_TEST is not set # # Device Drivers # CONFIG_HAVE_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_DOMAINS_GENERIC=y CONFIG_PCIEPORTBUS=y # CONFIG_HOTPLUG_PCI_PCIE is not set # CONFIG_PCIEAER is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEFAULT is not set CONFIG_PCIEASPM_POWERSAVE=y # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_PCIE_PTM=y CONFIG_PCI_MSI=y CONFIG_PCI_MSI_IRQ_DOMAIN=y CONFIG_PCI_QUIRKS=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_PCI_ATS=y CONFIG_PCI_ECAM=y # CONFIG_PCI_IOV is not set CONFIG_PCI_PRI=y # CONFIG_PCI_PASID is not set # CONFIG_PCIE_BUS_TUNE_OFF is not set CONFIG_PCIE_BUS_DEFAULT=y # CONFIG_PCIE_BUS_SAFE is not set # CONFIG_PCIE_BUS_PERFORMANCE is not set # CONFIG_PCIE_BUS_PEER2PEER is not set # CONFIG_VGA_ARB is not set CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_CPCI=y # CONFIG_HOTPLUG_PCI_SHPC is not set # # PCI controller drivers # # CONFIG_PCI_AARDVARK is not set # CONFIG_PCIE_XILINX_NWL is not set CONFIG_PCI_FTPCI100=y # CONFIG_PCI_TEGRA is not set # CONFIG_PCIE_RCAR_HOST is not set CONFIG_PCI_HOST_COMMON=y CONFIG_PCI_HOST_GENERIC=y CONFIG_PCIE_XILINX=y # CONFIG_PCIE_XILINX_CPM is not set # CONFIG_PCI_XGENE is not set # CONFIG_PCI_V3_SEMI is not set # CONFIG_PCI_VERSATILE is not set # CONFIG_PCIE_ALTERA is not set # CONFIG_PCI_HOST_THUNDER_PEM is not set # CONFIG_PCI_HOST_THUNDER_ECAM is not set # CONFIG_PCIE_ROCKCHIP_HOST is not set # CONFIG_PCIE_MEDIATEK is not set # CONFIG_PCIE_MEDIATEK_GEN3 is not set # CONFIG_PCIE_BRCMSTB is not set # CONFIG_PCI_LOONGSON is not set CONFIG_PCIE_MICROCHIP_HOST=y # CONFIG_PCIE_APPLE is not set # CONFIG_PCIE_MT7621 is not set # # DesignWare PCI Core Support # CONFIG_PCIE_DW=y CONFIG_PCIE_DW_HOST=y # CONFIG_PCIE_DW_PLAT_HOST is not set # CONFIG_PCI_EXYNOS is not set # CONFIG_PCI_IMX6 is not set # CONFIG_PCIE_SPEAR13XX is not set # CONFIG_PCI_KEYSTONE_HOST is not set # CONFIG_PCI_LAYERSCAPE is not set # CONFIG_PCI_HISI is not set # CONFIG_PCIE_QCOM is not set # CONFIG_PCIE_ARMADA_8K is not set # CONFIG_PCIE_ARTPEC6_HOST is not set # CONFIG_PCIE_ROCKCHIP_DW_HOST is not set # CONFIG_PCIE_INTEL_GW is not set # CONFIG_PCIE_KEEMBAY_HOST is not set # CONFIG_PCIE_KIRIN is not set # CONFIG_PCIE_HISI_STB is not set CONFIG_PCI_MESON=y # CONFIG_PCIE_TEGRA194_HOST is not set # CONFIG_PCIE_VISCONTI_HOST is not set # CONFIG_PCIE_UNIPHIER is not set # CONFIG_PCIE_AL is not set # CONFIG_PCIE_FU740 is not set # end of DesignWare PCI Core Support # # Mobiveil PCIe Core Support # # CONFIG_PCIE_MOBIVEIL_PLAT is not set # CONFIG_PCIE_LAYERSCAPE_GEN4 is not set # end of Mobiveil PCIe Core Support # # Cadence PCIe controllers support # CONFIG_PCIE_CADENCE=y CONFIG_PCIE_CADENCE_HOST=y CONFIG_PCIE_CADENCE_PLAT=y CONFIG_PCIE_CADENCE_PLAT_HOST=y CONFIG_PCI_J721E=y CONFIG_PCI_J721E_HOST=y # end of Cadence PCIe controllers support # end of PCI controller drivers # # PCI Endpoint # # CONFIG_PCI_ENDPOINT is not set # end of PCI Endpoint # # PCI switch controller drivers # # CONFIG_PCI_SW_SWITCHTEC is not set # end of PCI switch controller drivers # CONFIG_CXL_BUS is not set # CONFIG_PCCARD is not set CONFIG_RAPIDIO=y CONFIG_RAPIDIO_TSI721=y CONFIG_RAPIDIO_DISC_TIMEOUT=30 # CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set # CONFIG_RAPIDIO_DEBUG is not set CONFIG_RAPIDIO_ENUM_BASIC=y CONFIG_RAPIDIO_CHMAN=y CONFIG_RAPIDIO_MPORT_CDEV=y # # RapidIO Switch drivers # # CONFIG_RAPIDIO_CPS_XX is not set CONFIG_RAPIDIO_CPS_GEN2=y CONFIG_RAPIDIO_RXS_GEN3=y # end of RapidIO Switch drivers # # Generic Driver Options # CONFIG_AUXILIARY_BUS=y # CONFIG_UEVENT_HELPER is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DEVTMPFS_SAFE=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # # Firmware loader # CONFIG_FW_LOADER=y CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_FW_LOADER_SYSFS=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_FW_LOADER_COMPRESS=y # CONFIG_FW_LOADER_COMPRESS_XZ is not set CONFIG_FW_LOADER_COMPRESS_ZSTD=y CONFIG_FW_UPLOAD=y # end of Firmware loader CONFIG_WANT_DEV_COREDUMP=y CONFIG_ALLOW_DEV_COREDUMP=y CONFIG_DEV_COREDUMP=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set CONFIG_PM_QOS_KUNIT_TEST=y # CONFIG_DRIVER_PE_KUNIT_TEST is not set CONFIG_GENERIC_CPU_DEVICES=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y CONFIG_REGMAP_SPMI=y CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_REGMAP_SCCB=y CONFIG_REGMAP_I3C=y CONFIG_REGMAP_SPI_AVMM=y CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set # end of Generic Driver Options # # Bus devices # # CONFIG_ARM_INTEGRATOR_LM is not set # CONFIG_BT1_APB is not set # CONFIG_BT1_AXI is not set CONFIG_MOXTET=y # CONFIG_HISILICON_LPC is not set # CONFIG_INTEL_IXP4XX_EB is not set # CONFIG_QCOM_EBI2 is not set CONFIG_MHI_BUS=y CONFIG_MHI_BUS_DEBUG=y CONFIG_MHI_BUS_PCI_GENERIC=y CONFIG_MHI_BUS_EP=y # end of Bus devices CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # # Firmware Drivers # # # ARM System Control and Management Interface Protocol # # CONFIG_ARM_SCMI_PROTOCOL is not set CONFIG_ARM_SCMI_POWER_DOMAIN=y # CONFIG_ARM_SCMI_POWER_CONTROL is not set # end of ARM System Control and Management Interface Protocol CONFIG_ARM_SCPI_POWER_DOMAIN=y # CONFIG_FIRMWARE_MEMMAP is not set # CONFIG_BCM47XX_NVRAM is not set CONFIG_CS_DSP=y # CONFIG_GOOGLE_FIRMWARE is not set # # Tegra firmware driver # # end of Tegra firmware driver # end of Firmware Drivers CONFIG_GNSS=y CONFIG_GNSS_SERIAL=y # CONFIG_GNSS_MTK_SERIAL is not set CONFIG_GNSS_SIRF_SERIAL=y CONFIG_GNSS_UBX_SERIAL=y # CONFIG_GNSS_USB is not set CONFIG_MTD=y # # Partition parsers # CONFIG_MTD_AR7_PARTS=y # CONFIG_MTD_BCM63XX_PARTS is not set # CONFIG_MTD_BRCM_U_BOOT is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set # CONFIG_MTD_PARSER_IMAGETAG is not set # CONFIG_MTD_PARSER_TRX is not set # CONFIG_MTD_SHARPSL_PARTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # end of Partition parsers # # User Modules And Translation Layers # CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # # Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK. # # CONFIG_FTL is not set # CONFIG_NFTL is not set CONFIG_INFTL=y CONFIG_RFD_FTL=y # CONFIG_SSFDC is not set CONFIG_SM_FTL=y CONFIG_MTD_OOPS=y CONFIG_MTD_PARTITIONED_MASTER=y # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y # CONFIG_MTD_ABSENT is not set # end of RAM/ROM/Flash chip drivers # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_SC520CDP is not set # CONFIG_MTD_NETSC520 is not set # CONFIG_MTD_TS5500 is not set CONFIG_MTD_PCI=y CONFIG_MTD_INTEL_VR_NOR=y CONFIG_MTD_PLATRAM=y # end of Mapping drivers for chip access # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set CONFIG_MTD_DATAFLASH=y CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y CONFIG_MTD_DATAFLASH_OTP=y # CONFIG_MTD_MCHP23K256 is not set CONFIG_MTD_MCHP48L640=y CONFIG_MTD_SPEAR_SMI=y CONFIG_MTD_SST25L=y CONFIG_MTD_SLRAM=y CONFIG_MTD_PHRAM=y CONFIG_MTD_MTDRAM=y CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTDRAM_ERASE_SIZE=128 CONFIG_MTD_BLOCK2MTD=y # # Disk-On-Chip Device Drivers # CONFIG_MTD_DOCG3=y CONFIG_BCH_CONST_M=14 CONFIG_BCH_CONST_T=4 # end of Self-contained MTD device drivers # # NAND # CONFIG_MTD_NAND_CORE=y # CONFIG_MTD_ONENAND is not set CONFIG_MTD_RAW_NAND=y # # Raw/parallel NAND flash controllers # CONFIG_MTD_NAND_DENALI=y CONFIG_MTD_NAND_DENALI_PCI=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_AMS_DELTA=y # CONFIG_MTD_NAND_SHARPSL is not set CONFIG_MTD_NAND_CAFE=y # CONFIG_MTD_NAND_ATMEL is not set # CONFIG_MTD_NAND_MARVELL is not set # CONFIG_MTD_NAND_SLC_LPC32XX is not set # CONFIG_MTD_NAND_MLC_LPC32XX is not set # CONFIG_MTD_NAND_BRCMNAND is not set # CONFIG_MTD_NAND_OXNAS is not set # CONFIG_MTD_NAND_FSL_IFC is not set # CONFIG_MTD_NAND_VF610_NFC is not set # CONFIG_MTD_NAND_MXC is not set # CONFIG_MTD_NAND_SH_FLCTL is not set # CONFIG_MTD_NAND_DAVINCI is not set # CONFIG_MTD_NAND_TXX9NDFMC is not set # CONFIG_MTD_NAND_FSMC is not set # CONFIG_MTD_NAND_SUNXI is not set # CONFIG_MTD_NAND_HISI504 is not set # CONFIG_MTD_NAND_QCOM is not set CONFIG_MTD_NAND_MXIC=y # CONFIG_MTD_NAND_TEGRA is not set # CONFIG_MTD_NAND_STM32_FMC2 is not set # CONFIG_MTD_NAND_MESON is not set # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_CADENCE=y CONFIG_MTD_NAND_ARASAN=y CONFIG_MTD_NAND_INTEL_LGM=y # CONFIG_MTD_NAND_RENESAS is not set # # Misc # CONFIG_MTD_SM_COMMON=y CONFIG_MTD_NAND_NANDSIM=y CONFIG_MTD_NAND_RICOH=y CONFIG_MTD_NAND_DISKONCHIP=y # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y # CONFIG_MTD_SPI_NAND is not set # # ECC engine support # CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND_ECC_SW_HAMMING=y # CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set CONFIG_MTD_NAND_ECC_SW_BCH=y CONFIG_MTD_NAND_ECC_MXIC=y # CONFIG_MTD_NAND_ECC_MEDIATEK is not set # end of ECC engine support # end of NAND # # LPDDR & LPDDR2 PCM memory drivers # CONFIG_MTD_LPDDR=y CONFIG_MTD_QINFO_PROBE=y # end of LPDDR & LPDDR2 PCM memory drivers CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y # CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y # CONFIG_MTD_SPI_NOR_SWP_KEEP is not set # CONFIG_SPI_HISI_SFC is not set # CONFIG_SPI_NXP_SPIFI is not set CONFIG_MTD_UBI=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_FASTMAP=y # CONFIG_MTD_UBI_GLUEBI is not set CONFIG_MTD_UBI_BLOCK=y CONFIG_MTD_HYPERBUS=y # CONFIG_HBMC_AM654 is not set CONFIG_DTC=y CONFIG_OF=y # CONFIG_OF_UNITTEST is not set # CONFIG_OF_ALL_DTBS is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_KOBJ=y CONFIG_OF_DYNAMIC=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_RESERVED_MEM=y # CONFIG_OF_OVERLAY is not set CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set CONFIG_BLK_DEV=y CONFIG_BLK_DEV_NULL_BLK=y CONFIG_PARIDE=y # # Parallel IDE high-level drivers # # CONFIG_PARIDE_PD is not set # CONFIG_PARIDE_PCD is not set # CONFIG_PARIDE_PF is not set # CONFIG_PARIDE_PT is not set # CONFIG_PARIDE_PG is not set # # Parallel IDE protocol modules # # CONFIG_PARIDE_ATEN is not set CONFIG_PARIDE_BPCK=y CONFIG_PARIDE_BPCK6=y CONFIG_PARIDE_COMM=y CONFIG_PARIDE_DSTR=y CONFIG_PARIDE_FIT2=y # CONFIG_PARIDE_FIT3 is not set CONFIG_PARIDE_EPAT=y # CONFIG_PARIDE_EPATC8 is not set CONFIG_PARIDE_EPIA=y # CONFIG_PARIDE_FRIQ is not set # CONFIG_PARIDE_FRPW is not set # CONFIG_PARIDE_KBIC is not set CONFIG_PARIDE_KTTI=y # CONFIG_PARIDE_ON20 is not set # CONFIG_PARIDE_ON26 is not set # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set # CONFIG_ZRAM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLK_DEV_DRBD=y # CONFIG_DRBD_FAULT_INJECTION is not set CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_ATA_OVER_ETH=y CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_RBD=y # CONFIG_BLK_DEV_UBLK is not set # # NVME Support # CONFIG_NVME_COMMON=y CONFIG_NVME_CORE=y CONFIG_BLK_DEV_NVME=y # CONFIG_NVME_MULTIPATH is not set # CONFIG_NVME_VERBOSE_ERRORS is not set CONFIG_NVME_FABRICS=y # CONFIG_NVME_FC is not set CONFIG_NVME_TCP=y # CONFIG_NVME_AUTH is not set CONFIG_NVME_TARGET=y CONFIG_NVME_TARGET_PASSTHRU=y # CONFIG_NVME_TARGET_LOOP is not set # CONFIG_NVME_TARGET_FC is not set CONFIG_NVME_TARGET_TCP=y CONFIG_NVME_TARGET_AUTH=y # end of NVME Support # # Misc devices # # CONFIG_AD525X_DPOT is not set CONFIG_DUMMY_IRQ=y # CONFIG_PHANTOM is not set CONFIG_TIFM_CORE=y CONFIG_TIFM_7XX1=y CONFIG_ICS932S401=y # CONFIG_ATMEL_SSC is not set CONFIG_ENCLOSURE_SERVICES=y # CONFIG_GEHC_ACHC is not set CONFIG_HI6421V600_IRQ=y CONFIG_HP_ILO=y # CONFIG_QCOM_COINCELL is not set CONFIG_APDS9802ALS=y CONFIG_ISL29003=y # CONFIG_ISL29020 is not set CONFIG_SENSORS_TSL2550=y CONFIG_SENSORS_BH1770=y CONFIG_SENSORS_APDS990X=y # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_PCH_PHUB is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set CONFIG_DW_XDATA_PCIE=y CONFIG_PCI_ENDPOINT_TEST=y # CONFIG_XILINX_SDFEC is not set CONFIG_MISC_RTSX=y CONFIG_HISI_HIKEY_USB=y CONFIG_OPEN_DICE=y CONFIG_VCPU_STALL_DETECTOR=y CONFIG_C2PORT=y # # EEPROM support # CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_EEPROM_LEGACY=y CONFIG_EEPROM_MAX6875=y CONFIG_EEPROM_93CX6=y CONFIG_EEPROM_93XX46=y CONFIG_EEPROM_IDT_89HPESX=y CONFIG_EEPROM_EE1004=y # end of EEPROM support CONFIG_CB710_CORE=y CONFIG_CB710_DEBUG=y CONFIG_CB710_DEBUG_ASSUMPTIONS=y # # Texas Instruments shared transport line discipline # # end of Texas Instruments shared transport line discipline # CONFIG_ALTERA_STAPL is not set CONFIG_ECHO=y CONFIG_BCM_VK=y CONFIG_MISC_ALCOR_PCI=y CONFIG_MISC_RTSX_PCI=y CONFIG_MISC_RTSX_USB=y # CONFIG_HABANA_AI is not set CONFIG_UACCE=y # CONFIG_PVPANIC is not set # CONFIG_GP_PCI1XXXX is not set # end of Misc devices # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=y CONFIG_SCSI_COMMON=y # CONFIG_SCSI is not set # end of SCSI device support # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=y CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y CONFIG_DM_PERSISTENT_DATA=y # CONFIG_DM_UNSTRIPED is not set # CONFIG_DM_CRYPT is not set CONFIG_DM_SNAPSHOT=y # CONFIG_DM_THIN_PROVISIONING is not set # CONFIG_DM_CACHE is not set # CONFIG_DM_WRITECACHE is not set CONFIG_DM_EBS=y # CONFIG_DM_ERA is not set CONFIG_DM_CLONE=y CONFIG_DM_MIRROR=y CONFIG_DM_LOG_USERSPACE=y # CONFIG_DM_RAID is not set CONFIG_DM_ZERO=y CONFIG_DM_MULTIPATH=y CONFIG_DM_MULTIPATH_QL=y CONFIG_DM_MULTIPATH_ST=y CONFIG_DM_MULTIPATH_HST=y CONFIG_DM_MULTIPATH_IOA=y CONFIG_DM_DELAY=y CONFIG_DM_DUST=y # CONFIG_DM_INIT is not set CONFIG_DM_UEVENT=y # CONFIG_DM_FLAKEY is not set CONFIG_DM_VERITY=y CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y CONFIG_DM_VERITY_FEC=y CONFIG_DM_SWITCH=y CONFIG_DM_LOG_WRITES=y # CONFIG_DM_INTEGRITY is not set CONFIG_DM_ZONED=y CONFIG_TARGET_CORE=y # CONFIG_TCM_IBLOCK is not set CONFIG_TCM_FILEIO=y CONFIG_ISCSI_TARGET=y CONFIG_SBP_TARGET=y CONFIG_FUSION=y CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=y CONFIG_FIREWIRE_OHCI=y CONFIG_FIREWIRE_NET=y CONFIG_FIREWIRE_NOSY=y # end of IEEE 1394 (FireWire) support CONFIG_NETDEVICES=y CONFIG_MII=y # CONFIG_NET_CORE is not set CONFIG_ARCNET=y CONFIG_ARCNET_1201=y CONFIG_ARCNET_1051=y # CONFIG_ARCNET_RAW is not set CONFIG_ARCNET_CAP=y CONFIG_ARCNET_COM90xx=y # CONFIG_ARCNET_COM90xxIO is not set CONFIG_ARCNET_RIM_I=y # CONFIG_ARCNET_COM20020 is not set # CONFIG_ATM_DRIVERS is not set # # Distributed Switch Architecture drivers # CONFIG_B53=y CONFIG_B53_SPI_DRIVER=y # CONFIG_B53_MDIO_DRIVER is not set CONFIG_B53_MMAP_DRIVER=y CONFIG_B53_SRAB_DRIVER=y # CONFIG_B53_SERDES is not set CONFIG_NET_DSA_BCM_SF2=y CONFIG_NET_DSA_LOOP=y # CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK is not set CONFIG_NET_DSA_LANTIQ_GSWIP=y CONFIG_NET_DSA_MT7530=y CONFIG_NET_DSA_MV88E6060=y # CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON is not set # CONFIG_NET_DSA_MV88E6XXX is not set CONFIG_NET_DSA_AR9331=y CONFIG_NET_DSA_QCA8K=y # CONFIG_NET_DSA_SJA1105 is not set CONFIG_NET_DSA_XRS700X=y CONFIG_NET_DSA_XRS700X_I2C=y # CONFIG_NET_DSA_XRS700X_MDIO is not set # CONFIG_NET_DSA_REALTEK is not set CONFIG_NET_DSA_SMSC_LAN9303=y # CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y CONFIG_NET_DSA_VITESSE_VSC73XX=y # CONFIG_NET_DSA_VITESSE_VSC73XX_SPI is not set CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=y # end of Distributed Switch Architecture drivers # CONFIG_ETHERNET is not set CONFIG_FDDI=y CONFIG_DEFXX=y # CONFIG_SKFP is not set # CONFIG_HIPPI is not set CONFIG_PHYLINK=y CONFIG_PHYLIB=y CONFIG_SWPHY=y # CONFIG_LED_TRIGGER_PHY is not set CONFIG_FIXED_PHY=y CONFIG_SFP=y # # MII PHY device drivers # # CONFIG_AMD_PHY is not set # CONFIG_MESON_GXL_PHY is not set # CONFIG_ADIN_PHY is not set # CONFIG_ADIN1100_PHY is not set CONFIG_AQUANTIA_PHY=y CONFIG_AX88796B_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_BCM54140_PHY=y # CONFIG_BCM63XX_PHY is not set CONFIG_BCM7XXX_PHY=y CONFIG_BCM84881_PHY=y # CONFIG_BCM87XX_PHY is not set CONFIG_BCM_NET_PHYLIB=y CONFIG_CICADA_PHY=y CONFIG_CORTINA_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_LXT_PHY=y CONFIG_INTEL_XWAY_PHY=y # CONFIG_LSI_ET1011C_PHY is not set CONFIG_MARVELL_PHY=y CONFIG_MARVELL_10G_PHY=y CONFIG_MARVELL_88X2222_PHY=y CONFIG_MAXLINEAR_GPHY=y CONFIG_MEDIATEK_GE_PHY=y # CONFIG_MICREL_PHY is not set CONFIG_MICROCHIP_PHY=y # CONFIG_MICROCHIP_T1_PHY is not set # CONFIG_MICROSEMI_PHY is not set # CONFIG_MOTORCOMM_PHY is not set CONFIG_NATIONAL_PHY=y CONFIG_NXP_C45_TJA11XX_PHY=y CONFIG_AT803X_PHY=y CONFIG_QSEMI_PHY=y CONFIG_REALTEK_PHY=y # CONFIG_RENESAS_PHY is not set # CONFIG_ROCKCHIP_PHY is not set # CONFIG_SMSC_PHY is not set CONFIG_STE10XP=y # CONFIG_TERANETICS_PHY is not set CONFIG_DP83822_PHY=y CONFIG_DP83TC811_PHY=y CONFIG_DP83848_PHY=y CONFIG_DP83867_PHY=y CONFIG_DP83869_PHY=y CONFIG_DP83TD510_PHY=y CONFIG_VITESSE_PHY=y # CONFIG_XILINX_GMII2RGMII is not set CONFIG_MICREL_KS8995MA=y CONFIG_PSE_CONTROLLER=y CONFIG_PSE_REGULATOR=y CONFIG_CAN_DEV=y CONFIG_CAN_VCAN=y CONFIG_CAN_VXCAN=y # CONFIG_CAN_NETLINK is not set CONFIG_CAN_DEBUG_DEVICES=y # # MCTP Device Drivers # # CONFIG_MCTP_TRANSPORT_I2C is not set # end of MCTP Device Drivers CONFIG_MDIO_DEVICE=y CONFIG_MDIO_BUS=y CONFIG_FWNODE_MDIO=y CONFIG_OF_MDIO=y CONFIG_MDIO_DEVRES=y # CONFIG_MDIO_SUN4I is not set # CONFIG_MDIO_XGENE is not set # CONFIG_MDIO_ASPEED is not set CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_BCM_IPROC is not set CONFIG_MDIO_BCM_UNIMAC=y # CONFIG_MDIO_GPIO is not set CONFIG_MDIO_HISI_FEMAC=y CONFIG_MDIO_I2C=y CONFIG_MDIO_MVUSB=y CONFIG_MDIO_MSCC_MIIM=y # CONFIG_MDIO_MOXART is not set # CONFIG_MDIO_OCTEON is not set # CONFIG_MDIO_IPQ4019 is not set CONFIG_MDIO_IPQ8064=y # # MDIO Multiplexers # CONFIG_MDIO_BUS_MUX=y # CONFIG_MDIO_BUS_MUX_MESON_G12A is not set # CONFIG_MDIO_BUS_MUX_BCM6368 is not set # CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set CONFIG_MDIO_BUS_MUX_GPIO=y CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y # CONFIG_MDIO_BUS_MUX_MMIOREG is not set # # PCS device drivers # # CONFIG_PCS_RZN1_MIIC is not set # end of PCS device drivers CONFIG_PLIP=y CONFIG_PPP=y CONFIG_PPP_BSDCOMP=y CONFIG_PPP_DEFLATE=y # CONFIG_PPP_FILTER is not set # CONFIG_PPP_MPPE is not set CONFIG_PPP_MULTILINK=y # CONFIG_PPPOATM is not set CONFIG_PPPOE=y CONFIG_PPTP=y CONFIG_PPPOL2TP=y CONFIG_SLHC=y CONFIG_USB_NET_DRIVERS=y CONFIG_USB_CATC=y CONFIG_USB_KAWETH=y CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8150=y CONFIG_USB_RTL8152=y CONFIG_USB_LAN78XX=y # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set # CONFIG_WLAN is not set # CONFIG_WAN is not set # CONFIG_IEEE802154_DRIVERS is not set # # Wireless WAN # CONFIG_WWAN=y CONFIG_WWAN_DEBUGFS=y # CONFIG_WWAN_HWSIM is not set # CONFIG_MHI_WWAN_CTRL is not set CONFIG_MHI_WWAN_MBIM=y # CONFIG_QCOM_BAM_DMUX is not set CONFIG_IOSM=y CONFIG_MTK_T7XX=y # end of Wireless WAN CONFIG_VMXNET3=y CONFIG_USB4_NET=y # CONFIG_NETDEVSIM is not set # CONFIG_NET_FAILOVER is not set CONFIG_ISDN=y CONFIG_ISDN_CAPI=y CONFIG_MISDN=y CONFIG_MISDN_DSP=y CONFIG_MISDN_L1OIP=y # # mISDN hardware drivers # CONFIG_MISDN_HFCPCI=y CONFIG_MISDN_HFCMULTI=y CONFIG_MISDN_HFCUSB=y CONFIG_MISDN_AVMFRITZ=y CONFIG_MISDN_SPEEDFAX=y # CONFIG_MISDN_INFINEON is not set # CONFIG_MISDN_W6692 is not set CONFIG_MISDN_IPAC=y CONFIG_MISDN_ISAR=y # # Input device support # # CONFIG_INPUT is not set # # Hardware I/O ports # # CONFIG_SERIO is not set CONFIG_GAMEPORT=y CONFIG_GAMEPORT_NS558=y # CONFIG_GAMEPORT_L4 is not set CONFIG_GAMEPORT_EMU10K1=y CONFIG_GAMEPORT_FM801=y # end of Hardware I/O ports # end of Input device support # # Character devices # # CONFIG_TTY is not set CONFIG_SERIAL_DEV_BUS=y CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=y CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y # CONFIG_IPMI_PANIC_STRING is not set # CONFIG_IPMI_DEVICE_INTERFACE is not set # CONFIG_IPMI_SI is not set # CONFIG_IPMI_SSIF is not set CONFIG_IPMI_IPMB=y # CONFIG_IPMI_WATCHDOG is not set CONFIG_IPMI_POWEROFF=y # CONFIG_ASPEED_KCS_IPMI_BMC is not set # CONFIG_NPCM7XX_KCS_IPMI_BMC is not set # CONFIG_ASPEED_BT_IPMI_BMC is not set # CONFIG_IPMB_DEVICE_INTERFACE is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=y CONFIG_HW_RANDOM_ATMEL=y # CONFIG_HW_RANDOM_BA431 is not set CONFIG_HW_RANDOM_BCM2835=y CONFIG_HW_RANDOM_IPROC_RNG200=y CONFIG_HW_RANDOM_IXP4XX=y CONFIG_HW_RANDOM_OMAP=y CONFIG_HW_RANDOM_OMAP3_ROM=y CONFIG_HW_RANDOM_VIRTIO=y CONFIG_HW_RANDOM_IMX_RNGC=y CONFIG_HW_RANDOM_NOMADIK=y CONFIG_HW_RANDOM_STM32=y CONFIG_HW_RANDOM_MESON=y CONFIG_HW_RANDOM_MTK=y CONFIG_HW_RANDOM_EXYNOS=y CONFIG_HW_RANDOM_NPCM=y CONFIG_HW_RANDOM_KEYSTONE=y CONFIG_HW_RANDOM_CCTRNG=y CONFIG_HW_RANDOM_XIPHERA=y CONFIG_APPLICOM=y # CONFIG_DEVMEM is not set CONFIG_DEVPORT=y CONFIG_TCG_TPM=y CONFIG_HW_RANDOM_TPM=y CONFIG_TCG_TIS_CORE=y CONFIG_TCG_TIS=y CONFIG_TCG_TIS_SPI=y CONFIG_TCG_TIS_SPI_CR50=y # CONFIG_TCG_TIS_I2C is not set # CONFIG_TCG_TIS_SYNQUACER is not set # CONFIG_TCG_TIS_I2C_CR50 is not set CONFIG_TCG_TIS_I2C_ATMEL=y CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_TCG_TIS_I2C_NUVOTON=y CONFIG_TCG_VTPM_PROXY=y CONFIG_TCG_TIS_ST33ZP24=y CONFIG_TCG_TIS_ST33ZP24_I2C=y CONFIG_TCG_TIS_ST33ZP24_SPI=y CONFIG_XILLYBUS_CLASS=y CONFIG_XILLYBUS=y CONFIG_XILLYBUS_PCIE=y CONFIG_XILLYBUS_OF=y # CONFIG_XILLYUSB is not set CONFIG_RANDOM_TRUST_CPU=y CONFIG_RANDOM_TRUST_BOOTLOADER=y # end of Character devices # # I2C support # CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_MUX=y # # Multiplexer I2C Chip support # CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_I2C_MUX_GPIO=y CONFIG_I2C_MUX_GPMUX=y # CONFIG_I2C_MUX_LTC4306 is not set CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_MUX_REG=y CONFIG_I2C_DEMUX_PINCTRL=y CONFIG_I2C_MUX_MLXCPLD=y # end of Multiplexer I2C Chip support # CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_SMBUS=y # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # end of I2C Algorithms # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set CONFIG_I2C_ALI1563=y CONFIG_I2C_ALI15X3=y # CONFIG_I2C_AMD756 is not set CONFIG_I2C_AMD8111=y # CONFIG_I2C_HIX5HD2 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set CONFIG_I2C_PIIX4=y CONFIG_I2C_NFORCE2=y # CONFIG_I2C_NVIDIA_GPU is not set # CONFIG_I2C_SIS5595 is not set CONFIG_I2C_SIS630=y CONFIG_I2C_SIS96X=y CONFIG_I2C_VIA=y # CONFIG_I2C_VIAPRO is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_ALTERA is not set # CONFIG_I2C_ASPEED is not set # CONFIG_I2C_AT91 is not set # CONFIG_I2C_AXXIA is not set # CONFIG_I2C_BCM2835 is not set # CONFIG_I2C_BCM_IPROC is not set # CONFIG_I2C_BCM_KONA is not set CONFIG_I2C_BRCMSTB=y # CONFIG_I2C_CADENCE is not set CONFIG_I2C_CBUS_GPIO=y # CONFIG_I2C_DAVINCI is not set CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_SLAVE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_DIGICOLOR is not set # CONFIG_I2C_EG20T is not set # CONFIG_I2C_EMEV2 is not set # CONFIG_I2C_EXYNOS5 is not set CONFIG_I2C_GPIO=y CONFIG_I2C_GPIO_FAULT_INJECTOR=y # CONFIG_I2C_HIGHLANDER is not set # CONFIG_I2C_HISI is not set # CONFIG_I2C_IMG is not set # CONFIG_I2C_IMX is not set # CONFIG_I2C_IMX_LPI2C is not set # CONFIG_I2C_IOP3XX is not set # CONFIG_I2C_JZ4780 is not set # CONFIG_I2C_KEMPLD is not set # CONFIG_I2C_LPC2K is not set # CONFIG_I2C_MESON is not set # CONFIG_I2C_MICROCHIP_CORE is not set # CONFIG_I2C_MT65XX is not set # CONFIG_I2C_MT7621 is not set # CONFIG_I2C_MV64XXX is not set # CONFIG_I2C_MXS is not set # CONFIG_I2C_NPCM is not set CONFIG_I2C_OCORES=y # CONFIG_I2C_OMAP is not set # CONFIG_I2C_OWL is not set # CONFIG_I2C_APPLE is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PNX is not set # CONFIG_I2C_PXA is not set # CONFIG_I2C_QCOM_CCI is not set # CONFIG_I2C_QUP is not set # CONFIG_I2C_RIIC is not set CONFIG_I2C_RK3X=y # CONFIG_I2C_RZV2M is not set # CONFIG_I2C_S3C2410 is not set # CONFIG_I2C_SH_MOBILE is not set CONFIG_I2C_SIMTEC=y # CONFIG_I2C_SPRD is not set # CONFIG_I2C_ST is not set # CONFIG_I2C_STM32F4 is not set # CONFIG_I2C_STM32F7 is not set # CONFIG_I2C_SUN6I_P2WI is not set # CONFIG_I2C_SYNQUACER is not set # CONFIG_I2C_TEGRA_BPMP is not set # CONFIG_I2C_UNIPHIER is not set # CONFIG_I2C_UNIPHIER_F is not set # CONFIG_I2C_VERSATILE is not set # CONFIG_I2C_WMT is not set # CONFIG_I2C_XILINX is not set # CONFIG_I2C_XLP9XX is not set # CONFIG_I2C_RCAR is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_DIOLAN_U2C=y # CONFIG_I2C_DLN2 is not set CONFIG_I2C_CP2615=y CONFIG_I2C_PARPORT=y CONFIG_I2C_PCI1XXXX=y CONFIG_I2C_ROBOTFUZZ_OSIF=y CONFIG_I2C_TINY_USB=y CONFIG_I2C_VIPERBOARD=y # # Other I2C/SMBus bus drivers # # CONFIG_I2C_MLXCPLD is not set CONFIG_I2C_FSI=y CONFIG_I2C_VIRTIO=y # end of I2C Hardware Bus support CONFIG_I2C_SLAVE=y CONFIG_I2C_SLAVE_EEPROM=y # CONFIG_I2C_SLAVE_TESTUNIT is not set # CONFIG_I2C_DEBUG_CORE is not set CONFIG_I2C_DEBUG_ALGO=y # CONFIG_I2C_DEBUG_BUS is not set # end of I2C support CONFIG_I3C=y # CONFIG_CDNS_I3C_MASTER is not set CONFIG_DW_I3C_MASTER=y CONFIG_SVC_I3C_MASTER=y CONFIG_MIPI_I3C_HCI=y CONFIG_SPI=y CONFIG_SPI_DEBUG=y CONFIG_SPI_MASTER=y CONFIG_SPI_MEM=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set CONFIG_SPI_ALTERA_CORE=y CONFIG_SPI_ALTERA_DFL=y # CONFIG_SPI_AR934X is not set # CONFIG_SPI_ATH79 is not set # CONFIG_SPI_ARMADA_3700 is not set # CONFIG_SPI_ASPEED_SMC is not set # CONFIG_SPI_ATMEL is not set # CONFIG_SPI_ATMEL_QUADSPI is not set CONFIG_SPI_AXI_SPI_ENGINE=y # CONFIG_SPI_BCM2835 is not set # CONFIG_SPI_BCM2835AUX is not set # CONFIG_SPI_BCM63XX is not set # CONFIG_SPI_BCM63XX_HSSPI is not set # CONFIG_SPI_BCM_QSPI is not set CONFIG_SPI_BITBANG=y CONFIG_SPI_BUTTERFLY=y CONFIG_SPI_CADENCE=y # CONFIG_SPI_CADENCE_QUADSPI is not set CONFIG_SPI_CADENCE_XSPI=y # CONFIG_SPI_CLPS711X is not set CONFIG_SPI_DESIGNWARE=y CONFIG_SPI_DW_DMA=y CONFIG_SPI_DW_PCI=y # CONFIG_SPI_DW_MMIO is not set # CONFIG_SPI_DW_BT1 is not set CONFIG_SPI_DLN2=y # CONFIG_SPI_EP93XX is not set CONFIG_SPI_FSI=y # CONFIG_SPI_FSL_LPSPI is not set # CONFIG_SPI_FSL_QUADSPI is not set # CONFIG_SPI_GXP is not set # CONFIG_SPI_HISI_KUNPENG is not set # CONFIG_SPI_HISI_SFC_V3XX is not set CONFIG_SPI_NXP_FLEXSPI=y # CONFIG_SPI_GPIO is not set # CONFIG_SPI_IMG_SPFI is not set # CONFIG_SPI_IMX is not set # CONFIG_SPI_INGENIC is not set # CONFIG_SPI_INTEL_PCI is not set # CONFIG_SPI_INTEL_PLATFORM is not set # CONFIG_SPI_JCORE is not set CONFIG_SPI_LM70_LLP=y # CONFIG_SPI_LP8841_RTC is not set # CONFIG_SPI_FSL_SPI is not set # CONFIG_SPI_FSL_DSPI is not set # CONFIG_SPI_MESON_SPICC is not set # CONFIG_SPI_MESON_SPIFC is not set CONFIG_SPI_MICROCHIP_CORE=y CONFIG_SPI_MICROCHIP_CORE_QSPI=y # CONFIG_SPI_MT65XX is not set # CONFIG_SPI_MT7621 is not set # CONFIG_SPI_MTK_NOR is not set # CONFIG_SPI_NPCM_FIU is not set # CONFIG_SPI_NPCM_PSPI is not set # CONFIG_SPI_LANTIQ_SSC is not set CONFIG_SPI_OC_TINY=y # CONFIG_SPI_OMAP24XX is not set # CONFIG_SPI_TI_QSPI is not set # CONFIG_SPI_OMAP_100K is not set # CONFIG_SPI_ORION is not set # CONFIG_SPI_PIC32 is not set # CONFIG_SPI_PIC32_SQI is not set CONFIG_SPI_PXA2XX=y CONFIG_SPI_PXA2XX_PCI=y CONFIG_SPI_ROCKCHIP=y # CONFIG_SPI_ROCKCHIP_SFC is not set # CONFIG_SPI_RSPI is not set # CONFIG_SPI_QUP is not set # CONFIG_SPI_S3C64XX is not set # CONFIG_SPI_SC18IS602 is not set # CONFIG_SPI_SH_MSIOF is not set # CONFIG_SPI_SH is not set # CONFIG_SPI_SH_HSPI is not set CONFIG_SPI_SIFIVE=y # CONFIG_SPI_SPRD is not set # CONFIG_SPI_SPRD_ADI is not set # CONFIG_SPI_STM32 is not set # CONFIG_SPI_STM32_QSPI is not set # CONFIG_SPI_ST_SSC4 is not set # CONFIG_SPI_SUN4I is not set # CONFIG_SPI_SUN6I is not set # CONFIG_SPI_SUNPLUS_SP7021 is not set # CONFIG_SPI_SYNQUACER is not set # CONFIG_SPI_MXIC is not set # CONFIG_SPI_TEGRA210_QUAD is not set # CONFIG_SPI_TEGRA114 is not set # CONFIG_SPI_TEGRA20_SFLASH is not set # CONFIG_SPI_TEGRA20_SLINK is not set # CONFIG_SPI_TOPCLIFF_PCH is not set # CONFIG_SPI_UNIPHIER is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_XLP is not set # CONFIG_SPI_XTENSA_XTFPGA is not set # CONFIG_SPI_ZYNQ_QSPI is not set CONFIG_SPI_ZYNQMP_GQSPI=y CONFIG_SPI_AMD=y # # SPI Multiplexer support # CONFIG_SPI_MUX=y # # SPI Protocol Masters # CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_SLAVE is not set CONFIG_SPI_DYNAMIC=y CONFIG_SPMI=y CONFIG_SPMI_HISI3670=y # CONFIG_SPMI_MSM_PMIC_ARB is not set # CONFIG_SPMI_MTK_PMIF is not set CONFIG_HSI=y CONFIG_HSI_BOARDINFO=y # # HSI controllers # # # HSI clients # # CONFIG_HSI_CHAR is not set CONFIG_PPS=y # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set CONFIG_PPS_CLIENT_PARPORT=y CONFIG_PPS_CLIENT_GPIO=y # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=y CONFIG_PTP_1588_CLOCK_OPTIONAL=y CONFIG_PTP_1588_CLOCK_DTE=y CONFIG_PTP_1588_CLOCK_QORIQ=y # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_PTP_1588_CLOCK_IDT82P33=y CONFIG_PTP_1588_CLOCK_IDTCM=y # end of PTP clock support CONFIG_PINCTRL=y CONFIG_GENERIC_PINCTRL_GROUPS=y CONFIG_PINMUX=y CONFIG_GENERIC_PINMUX_FUNCTIONS=y CONFIG_PINCONF=y CONFIG_GENERIC_PINCONF=y # CONFIG_DEBUG_PINCTRL is not set # CONFIG_PINCTRL_AMD is not set # CONFIG_PINCTRL_AT91PIO4 is not set # CONFIG_PINCTRL_AXP209 is not set # CONFIG_PINCTRL_BM1880 is not set CONFIG_PINCTRL_CY8C95X0=y # CONFIG_PINCTRL_DA850_PUPD is not set # CONFIG_PINCTRL_DA9062 is not set # CONFIG_PINCTRL_EQUILIBRIUM is not set # CONFIG_PINCTRL_INGENIC is not set # CONFIG_PINCTRL_LPC18XX is not set CONFIG_PINCTRL_MCP23S08_I2C=y CONFIG_PINCTRL_MCP23S08_SPI=y CONFIG_PINCTRL_MCP23S08=y CONFIG_PINCTRL_MICROCHIP_SGPIO=y CONFIG_PINCTRL_OCELOT=y CONFIG_PINCTRL_PALMAS=y # CONFIG_PINCTRL_PISTACHIO is not set # CONFIG_PINCTRL_ROCKCHIP is not set CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_STMFX=y # CONFIG_PINCTRL_SX150X is not set # CONFIG_PINCTRL_OWL is not set # CONFIG_PINCTRL_ASPEED_G4 is not set # CONFIG_PINCTRL_ASPEED_G5 is not set # CONFIG_PINCTRL_ASPEED_G6 is not set # CONFIG_PINCTRL_BCM281XX is not set # CONFIG_PINCTRL_BCM2835 is not set # CONFIG_PINCTRL_BCM4908 is not set # CONFIG_PINCTRL_BCM6318 is not set # CONFIG_PINCTRL_BCM6328 is not set # CONFIG_PINCTRL_BCM6358 is not set # CONFIG_PINCTRL_BCM6362 is not set # CONFIG_PINCTRL_BCM6368 is not set # CONFIG_PINCTRL_BCM63268 is not set # CONFIG_PINCTRL_IPROC_GPIO is not set # CONFIG_PINCTRL_CYGNUS_MUX is not set # CONFIG_PINCTRL_NS is not set # CONFIG_PINCTRL_NSP_GPIO is not set # CONFIG_PINCTRL_NS2_MUX is not set # CONFIG_PINCTRL_NSP_MUX is not set # CONFIG_PINCTRL_AS370 is not set # CONFIG_PINCTRL_BERLIN_BG4CT is not set CONFIG_PINCTRL_LOCHNAGAR=y CONFIG_PINCTRL_MADERA=y CONFIG_PINCTRL_CS47L35=y CONFIG_PINCTRL_CS47L85=y CONFIG_PINCTRL_CS47L90=y CONFIG_PINCTRL_CS47L92=y # # Intel pinctrl drivers # # end of Intel pinctrl drivers # # MediaTek pinctrl drivers # # CONFIG_EINT_MTK is not set # CONFIG_PINCTRL_MT2701 is not set # CONFIG_PINCTRL_MT7623 is not set # CONFIG_PINCTRL_MT7629 is not set # CONFIG_PINCTRL_MT8135 is not set # CONFIG_PINCTRL_MT8127 is not set # CONFIG_PINCTRL_MT2712 is not set # CONFIG_PINCTRL_MT6765 is not set # CONFIG_PINCTRL_MT6779 is not set # CONFIG_PINCTRL_MT6795 is not set # CONFIG_PINCTRL_MT6797 is not set # CONFIG_PINCTRL_MT7622 is not set # CONFIG_PINCTRL_MT7986 is not set # CONFIG_PINCTRL_MT8167 is not set # CONFIG_PINCTRL_MT8173 is not set # CONFIG_PINCTRL_MT8183 is not set # CONFIG_PINCTRL_MT8186 is not set # CONFIG_PINCTRL_MT8188 is not set # CONFIG_PINCTRL_MT8192 is not set # CONFIG_PINCTRL_MT8195 is not set # CONFIG_PINCTRL_MT8365 is not set # CONFIG_PINCTRL_MT8516 is not set # CONFIG_PINCTRL_MT6397 is not set # end of MediaTek pinctrl drivers CONFIG_PINCTRL_MESON=y # CONFIG_PINCTRL_WPCM450 is not set # CONFIG_PINCTRL_NPCM7XX is not set # CONFIG_PINCTRL_PXA25X is not set # CONFIG_PINCTRL_PXA27X is not set # CONFIG_PINCTRL_MSM is not set # CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set # CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set # CONFIG_PINCTRL_LPASS_LPI is not set # # Renesas pinctrl drivers # # CONFIG_PINCTRL_RENESAS is not set # CONFIG_PINCTRL_PFC_EMEV2 is not set # CONFIG_PINCTRL_PFC_R8A77995 is not set # CONFIG_PINCTRL_PFC_R8A7794 is not set # CONFIG_PINCTRL_PFC_R8A77990 is not set # CONFIG_PINCTRL_PFC_R8A7779 is not set # CONFIG_PINCTRL_PFC_R8A7790 is not set # CONFIG_PINCTRL_PFC_R8A77950 is not set # CONFIG_PINCTRL_PFC_R8A77951 is not set # CONFIG_PINCTRL_PFC_R8A7778 is not set # CONFIG_PINCTRL_PFC_R8A7793 is not set # CONFIG_PINCTRL_PFC_R8A7791 is not set # CONFIG_PINCTRL_PFC_R8A77965 is not set # CONFIG_PINCTRL_PFC_R8A77960 is not set # CONFIG_PINCTRL_PFC_R8A77961 is not set # CONFIG_PINCTRL_PFC_R8A779F0 is not set # CONFIG_PINCTRL_PFC_R8A7792 is not set # CONFIG_PINCTRL_PFC_R8A77980 is not set # CONFIG_PINCTRL_PFC_R8A77970 is not set # CONFIG_PINCTRL_PFC_R8A779A0 is not set # CONFIG_PINCTRL_PFC_R8A779G0 is not set # CONFIG_PINCTRL_PFC_R8A7740 is not set # CONFIG_PINCTRL_PFC_R8A73A4 is not set # CONFIG_PINCTRL_RZA1 is not set # CONFIG_PINCTRL_RZA2 is not set # CONFIG_PINCTRL_RZG2L is not set # CONFIG_PINCTRL_PFC_R8A77470 is not set # CONFIG_PINCTRL_PFC_R8A7745 is not set # CONFIG_PINCTRL_PFC_R8A7742 is not set # CONFIG_PINCTRL_PFC_R8A7743 is not set # CONFIG_PINCTRL_PFC_R8A7744 is not set # CONFIG_PINCTRL_PFC_R8A774C0 is not set # CONFIG_PINCTRL_PFC_R8A774E1 is not set # CONFIG_PINCTRL_PFC_R8A774A1 is not set # CONFIG_PINCTRL_PFC_R8A774B1 is not set # CONFIG_PINCTRL_RZN1 is not set # CONFIG_PINCTRL_RZV2M is not set # CONFIG_PINCTRL_PFC_SH7203 is not set # CONFIG_PINCTRL_PFC_SH7264 is not set # CONFIG_PINCTRL_PFC_SH7269 is not set # CONFIG_PINCTRL_PFC_SH7720 is not set # CONFIG_PINCTRL_PFC_SH7722 is not set # CONFIG_PINCTRL_PFC_SH7734 is not set # CONFIG_PINCTRL_PFC_SH7757 is not set # CONFIG_PINCTRL_PFC_SH7785 is not set # CONFIG_PINCTRL_PFC_SH7786 is not set # CONFIG_PINCTRL_PFC_SH73A0 is not set # CONFIG_PINCTRL_PFC_SH7723 is not set # CONFIG_PINCTRL_PFC_SH7724 is not set # CONFIG_PINCTRL_PFC_SHX3 is not set # end of Renesas pinctrl drivers # CONFIG_PINCTRL_EXYNOS is not set # CONFIG_PINCTRL_S3C24XX is not set # CONFIG_PINCTRL_S3C64XX is not set # CONFIG_PINCTRL_SPRD_SC9860 is not set # CONFIG_PINCTRL_STARFIVE_JH7100 is not set # CONFIG_PINCTRL_STM32F429 is not set # CONFIG_PINCTRL_STM32F469 is not set # CONFIG_PINCTRL_STM32F746 is not set # CONFIG_PINCTRL_STM32F769 is not set # CONFIG_PINCTRL_STM32H743 is not set # CONFIG_PINCTRL_STM32MP135 is not set # CONFIG_PINCTRL_STM32MP157 is not set # CONFIG_PINCTRL_TI_IODELAY is not set CONFIG_PINCTRL_UNIPHIER=y # CONFIG_PINCTRL_UNIPHIER_LD4 is not set # CONFIG_PINCTRL_UNIPHIER_PRO4 is not set # CONFIG_PINCTRL_UNIPHIER_SLD8 is not set # CONFIG_PINCTRL_UNIPHIER_PRO5 is not set # CONFIG_PINCTRL_UNIPHIER_PXS2 is not set # CONFIG_PINCTRL_UNIPHIER_LD6B is not set # CONFIG_PINCTRL_UNIPHIER_LD11 is not set # CONFIG_PINCTRL_UNIPHIER_LD20 is not set # CONFIG_PINCTRL_UNIPHIER_PXS3 is not set # CONFIG_PINCTRL_UNIPHIER_NX1 is not set # CONFIG_PINCTRL_TMPV7700 is not set CONFIG_GPIOLIB=y CONFIG_GPIOLIB_FASTPATH_LIMIT=512 CONFIG_OF_GPIO=y CONFIG_GPIOLIB_IRQCHIP=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_CDEV=y CONFIG_GPIO_CDEV_V1=y CONFIG_GPIO_GENERIC=y CONFIG_GPIO_MAX730X=y # # Memory mapped GPIO drivers # # CONFIG_GPIO_74XX_MMIO is not set # CONFIG_GPIO_ALTERA is not set # CONFIG_GPIO_ASPEED is not set # CONFIG_GPIO_ASPEED_SGPIO is not set # CONFIG_GPIO_ATH79 is not set # CONFIG_GPIO_RASPBERRYPI_EXP is not set # CONFIG_GPIO_BCM_KONA is not set # CONFIG_GPIO_BCM_XGS_IPROC is not set # CONFIG_GPIO_BRCMSTB is not set CONFIG_GPIO_CADENCE=y # CONFIG_GPIO_CLPS711X is not set CONFIG_GPIO_DWAPB=y # CONFIG_GPIO_EIC_SPRD is not set # CONFIG_GPIO_EM is not set # CONFIG_GPIO_FTGPIO010 is not set CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_GRGPIO=y # CONFIG_GPIO_HISI is not set CONFIG_GPIO_HLWD=y # CONFIG_GPIO_IOP is not set CONFIG_GPIO_LOGICVC=y # CONFIG_GPIO_LPC18XX is not set # CONFIG_GPIO_LPC32XX is not set CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_MENZ127=y # CONFIG_GPIO_MPC8XXX is not set # CONFIG_GPIO_MT7621 is not set # CONFIG_GPIO_MXC is not set # CONFIG_GPIO_MXS is not set # CONFIG_GPIO_PMIC_EIC_SPRD is not set # CONFIG_GPIO_PXA is not set # CONFIG_GPIO_RCAR is not set # CONFIG_GPIO_RDA is not set # CONFIG_GPIO_ROCKCHIP is not set # CONFIG_GPIO_SAMA5D2_PIOBU is not set # CONFIG_GPIO_SIFIVE is not set CONFIG_GPIO_SIOX=y # CONFIG_GPIO_SNPS_CREG is not set # CONFIG_GPIO_SPRD is not set # CONFIG_GPIO_STP_XWAY is not set CONFIG_GPIO_SYSCON=y # CONFIG_GPIO_TEGRA is not set # CONFIG_GPIO_TEGRA186 is not set # CONFIG_GPIO_TS4800 is not set # CONFIG_GPIO_UNIPHIER is not set # CONFIG_GPIO_VISCONTI is not set # CONFIG_GPIO_VX855 is not set # CONFIG_GPIO_XGENE_SB is not set CONFIG_GPIO_XILINX=y # CONFIG_GPIO_XLP is not set CONFIG_GPIO_AMD_FCH=y # CONFIG_GPIO_IDT3243X is not set # end of Memory mapped GPIO drivers # # I2C GPIO expanders # CONFIG_GPIO_ADNP=y CONFIG_GPIO_GW_PLD=y CONFIG_GPIO_MAX7300=y # CONFIG_GPIO_MAX732X is not set CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PCA9570=y # CONFIG_GPIO_PCF857X is not set CONFIG_GPIO_TPIC2810=y # CONFIG_GPIO_TS4900 is not set # end of I2C GPIO expanders # # MFD GPIO expanders # CONFIG_GPIO_ADP5520=y CONFIG_GPIO_ARIZONA=y CONFIG_GPIO_BD71815=y # CONFIG_GPIO_BD71828 is not set # CONFIG_GPIO_BD9571MWV is not set CONFIG_GPIO_DA9052=y # CONFIG_GPIO_DLN2 is not set CONFIG_GPIO_KEMPLD=y # CONFIG_GPIO_LP873X is not set CONFIG_GPIO_LP87565=y CONFIG_GPIO_MADERA=y CONFIG_GPIO_MAX77650=y # CONFIG_GPIO_PALMAS is not set # CONFIG_GPIO_RC5T583 is not set # CONFIG_GPIO_SL28CPLD is not set # CONFIG_GPIO_TC3589X is not set CONFIG_GPIO_TPS65218=y # CONFIG_GPIO_TPS6586X is not set # CONFIG_GPIO_TPS65910 is not set # CONFIG_GPIO_TPS65912 is not set CONFIG_GPIO_TWL4030=y CONFIG_GPIO_TWL6040=y CONFIG_GPIO_WM831X=y CONFIG_GPIO_WM8350=y CONFIG_GPIO_WM8994=y # end of MFD GPIO expanders # # PCI GPIO expanders # CONFIG_GPIO_BT8XX=y # CONFIG_GPIO_ML_IOH is not set # CONFIG_GPIO_PCH is not set CONFIG_GPIO_PCI_IDIO_16=y CONFIG_GPIO_PCIE_IDIO_24=y CONFIG_GPIO_RDC321X=y # end of PCI GPIO expanders # # SPI GPIO expanders # # CONFIG_GPIO_74X164 is not set CONFIG_GPIO_MAX3191X=y # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_PISOSR is not set CONFIG_GPIO_XRA1403=y CONFIG_GPIO_MOXTET=y # end of SPI GPIO expanders # # USB GPIO expanders # CONFIG_GPIO_VIPERBOARD=y # end of USB GPIO expanders # # Virtual GPIO drivers # CONFIG_GPIO_AGGREGATOR=y CONFIG_GPIO_MOCKUP=y # CONFIG_GPIO_VIRTIO is not set # CONFIG_GPIO_SIM is not set # end of Virtual GPIO drivers CONFIG_W1=y CONFIG_W1_CON=y # # 1-wire Bus Masters # # CONFIG_W1_MASTER_MATROX is not set CONFIG_W1_MASTER_DS2490=y CONFIG_W1_MASTER_DS2482=y # CONFIG_W1_MASTER_MXC is not set # CONFIG_W1_MASTER_DS1WM is not set # CONFIG_W1_MASTER_GPIO is not set CONFIG_W1_MASTER_SGI=y # end of 1-wire Bus Masters # # 1-wire Slaves # # CONFIG_W1_SLAVE_THERM is not set CONFIG_W1_SLAVE_SMEM=y CONFIG_W1_SLAVE_DS2405=y CONFIG_W1_SLAVE_DS2408=y CONFIG_W1_SLAVE_DS2408_READBACK=y CONFIG_W1_SLAVE_DS2413=y CONFIG_W1_SLAVE_DS2406=y CONFIG_W1_SLAVE_DS2423=y CONFIG_W1_SLAVE_DS2805=y CONFIG_W1_SLAVE_DS2430=y # CONFIG_W1_SLAVE_DS2431 is not set CONFIG_W1_SLAVE_DS2433=y # CONFIG_W1_SLAVE_DS2433_CRC is not set # CONFIG_W1_SLAVE_DS2438 is not set # CONFIG_W1_SLAVE_DS250X is not set CONFIG_W1_SLAVE_DS2780=y CONFIG_W1_SLAVE_DS2781=y CONFIG_W1_SLAVE_DS28E04=y CONFIG_W1_SLAVE_DS28E17=y # end of 1-wire Slaves # CONFIG_POWER_RESET is not set CONFIG_POWER_SUPPLY=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=y CONFIG_GENERIC_ADC_BATTERY=y # CONFIG_IP5XXX_POWER is not set CONFIG_WM831X_BACKUP=y CONFIG_WM831X_POWER=y CONFIG_WM8350_POWER=y CONFIG_TEST_POWER=y CONFIG_CHARGER_ADP5061=y # CONFIG_BATTERY_ACT8945A is not set # CONFIG_BATTERY_CW2015 is not set CONFIG_BATTERY_DS2760=y # CONFIG_BATTERY_DS2780 is not set CONFIG_BATTERY_DS2781=y CONFIG_BATTERY_DS2782=y # CONFIG_BATTERY_LEGO_EV3 is not set CONFIG_BATTERY_SAMSUNG_SDI=y CONFIG_BATTERY_SBS=y CONFIG_CHARGER_SBS=y CONFIG_MANAGER_SBS=y CONFIG_BATTERY_BQ27XXX=y CONFIG_BATTERY_BQ27XXX_I2C=y CONFIG_BATTERY_BQ27XXX_HDQ=y # CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set # CONFIG_BATTERY_DA9052 is not set # CONFIG_CHARGER_DA9150 is not set CONFIG_BATTERY_DA9150=y # CONFIG_AXP20X_POWER is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_BATTERY_MAX1721X is not set # CONFIG_BATTERY_TWL4030_MADC is not set # CONFIG_CHARGER_PCF50633 is not set # CONFIG_BATTERY_RX51 is not set CONFIG_CHARGER_ISP1704=y CONFIG_CHARGER_MAX8903=y # CONFIG_CHARGER_TWL4030 is not set CONFIG_CHARGER_LP8727=y CONFIG_CHARGER_GPIO=y CONFIG_CHARGER_MANAGER=y # CONFIG_CHARGER_LT3651 is not set CONFIG_CHARGER_LTC4162L=y # CONFIG_CHARGER_MAX14577 is not set # CONFIG_CHARGER_DETECTOR_MAX14656 is not set CONFIG_CHARGER_MAX77650=y CONFIG_CHARGER_MAX77693=y CONFIG_CHARGER_MAX77976=y # CONFIG_CHARGER_MAX8997 is not set CONFIG_CHARGER_MT6360=y CONFIG_CHARGER_MT6370=y # CONFIG_CHARGER_QCOM_SMBB is not set CONFIG_CHARGER_BQ2415X=y CONFIG_CHARGER_BQ24190=y CONFIG_CHARGER_BQ24257=y # CONFIG_CHARGER_BQ24735 is not set CONFIG_CHARGER_BQ2515X=y CONFIG_CHARGER_BQ25890=y CONFIG_CHARGER_BQ25980=y CONFIG_CHARGER_BQ256XX=y CONFIG_CHARGER_SMB347=y CONFIG_CHARGER_TPS65090=y CONFIG_BATTERY_GAUGE_LTC2941=y # CONFIG_BATTERY_GOLDFISH is not set # CONFIG_BATTERY_RT5033 is not set # CONFIG_CHARGER_RT9455 is not set # CONFIG_CHARGER_SC2731 is not set # CONFIG_FUEL_GAUGE_SC27XX is not set CONFIG_CHARGER_UCS1002=y CONFIG_CHARGER_BD99954=y CONFIG_BATTERY_UG3105=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_THERMAL_NETLINK is not set # CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_OF=y CONFIG_THERMAL_WRITABLE_TRIPS=y # CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y # CONFIG_THERMAL_GOV_STEP_WISE is not set # CONFIG_THERMAL_GOV_BANG_BANG is not set # CONFIG_THERMAL_GOV_USER_SPACE is not set CONFIG_CPU_THERMAL=y # CONFIG_DEVFREQ_THERMAL is not set # CONFIG_THERMAL_EMULATION is not set CONFIG_THERMAL_MMIO=y CONFIG_HISI_THERMAL=y # CONFIG_IMX_THERMAL is not set # CONFIG_IMX8MM_THERMAL is not set # CONFIG_K3_THERMAL is not set # CONFIG_QORIQ_THERMAL is not set # CONFIG_SPEAR_THERMAL is not set # CONFIG_SUN8I_THERMAL is not set # CONFIG_ROCKCHIP_THERMAL is not set # CONFIG_RCAR_THERMAL is not set # CONFIG_RCAR_GEN3_THERMAL is not set # CONFIG_RZG2L_THERMAL is not set # CONFIG_KIRKWOOD_THERMAL is not set # CONFIG_DOVE_THERMAL is not set # CONFIG_ARMADA_THERMAL is not set CONFIG_DA9062_THERMAL=y CONFIG_MTK_THERMAL=y # # Intel thermal drivers # # # ACPI INT340X thermal drivers # # end of ACPI INT340X thermal drivers # end of Intel thermal drivers # # Broadcom thermal drivers # # CONFIG_BCM2711_THERMAL is not set # CONFIG_BCM2835_THERMAL is not set # CONFIG_BRCMSTB_THERMAL is not set # CONFIG_BCM_NS_THERMAL is not set # CONFIG_BCM_SR_THERMAL is not set # end of Broadcom thermal drivers # # Texas Instruments thermal drivers # # CONFIG_TI_SOC_THERMAL is not set # end of Texas Instruments thermal drivers # # Samsung thermal drivers # # CONFIG_EXYNOS_THERMAL is not set # end of Samsung thermal drivers # # NVIDIA Tegra thermal drivers # # CONFIG_TEGRA_SOCTHERM is not set # CONFIG_TEGRA_BPMP_THERMAL is not set # CONFIG_TEGRA30_TSENSOR is not set # end of NVIDIA Tegra thermal drivers # CONFIG_GENERIC_ADC_THERMAL is not set # # Qualcomm thermal drivers # # CONFIG_QCOM_SPMI_ADC_TM5 is not set # CONFIG_QCOM_SPMI_TEMP_ALARM is not set # end of Qualcomm thermal drivers # CONFIG_UNIPHIER_THERMAL is not set # CONFIG_SPRD_THERMAL is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y CONFIG_WATCHDOG_OPEN_TIMEOUT=0 CONFIG_WATCHDOG_SYSFS=y # CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set # # Watchdog Pretimeout Governors # # CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set CONFIG_BD957XMUF_WATCHDOG=y CONFIG_DA9052_WATCHDOG=y # CONFIG_DA9055_WATCHDOG is not set # CONFIG_DA9063_WATCHDOG is not set CONFIG_DA9062_WATCHDOG=y # CONFIG_GPIO_WATCHDOG is not set CONFIG_MENF21BMC_WATCHDOG=y # CONFIG_MENZ069_WATCHDOG is not set CONFIG_WM831X_WATCHDOG=y # CONFIG_WM8350_WATCHDOG is not set CONFIG_XILINX_WATCHDOG=y CONFIG_ZIIRAVE_WATCHDOG=y # CONFIG_SL28CPLD_WATCHDOG is not set # CONFIG_ARMADA_37XX_WATCHDOG is not set # CONFIG_ASM9260_WATCHDOG is not set # CONFIG_AT91RM9200_WATCHDOG is not set # CONFIG_AT91SAM9X_WATCHDOG is not set # CONFIG_SAMA5D4_WATCHDOG is not set CONFIG_CADENCE_WATCHDOG=y # CONFIG_FTWDT010_WATCHDOG is not set # CONFIG_S3C2410_WATCHDOG is not set CONFIG_DW_WATCHDOG=y # CONFIG_EP93XX_WATCHDOG is not set # CONFIG_OMAP_WATCHDOG is not set # CONFIG_PNX4008_WATCHDOG is not set # CONFIG_DAVINCI_WATCHDOG is not set # CONFIG_K3_RTI_WATCHDOG is not set # CONFIG_RN5T618_WATCHDOG is not set # CONFIG_SUNXI_WATCHDOG is not set # CONFIG_NPCM7XX_WATCHDOG is not set # CONFIG_TWL4030_WATCHDOG is not set # CONFIG_STMP3XXX_RTC_WATCHDOG is not set # CONFIG_TS4800_WATCHDOG is not set # CONFIG_TS72XX_WATCHDOG is not set CONFIG_MAX63XX_WATCHDOG=y # CONFIG_MAX77620_WATCHDOG is not set # CONFIG_IMX2_WDT is not set # CONFIG_IMX7ULP_WDT is not set CONFIG_RETU_WATCHDOG=y # CONFIG_MOXART_WDT is not set # CONFIG_ST_LPC_WATCHDOG is not set # CONFIG_TEGRA_WATCHDOG is not set # CONFIG_QCOM_WDT is not set # CONFIG_MESON_GXBB_WATCHDOG is not set # CONFIG_MESON_WATCHDOG is not set # CONFIG_MEDIATEK_WATCHDOG is not set # CONFIG_DIGICOLOR_WATCHDOG is not set # CONFIG_LPC18XX_WATCHDOG is not set # CONFIG_RENESAS_WDT is not set # CONFIG_RENESAS_RZAWDT is not set # CONFIG_RENESAS_RZN1WDT is not set # CONFIG_RENESAS_RZG2LWDT is not set # CONFIG_ASPEED_WATCHDOG is not set # CONFIG_UNIPHIER_WATCHDOG is not set # CONFIG_RTD119X_WATCHDOG is not set # CONFIG_REALTEK_OTTO_WDT is not set # CONFIG_SPRD_WATCHDOG is not set # CONFIG_VISCONTI_WATCHDOG is not set # CONFIG_MSC313E_WATCHDOG is not set # CONFIG_APPLE_WATCHDOG is not set # CONFIG_SUNPLUS_WATCHDOG is not set CONFIG_ALIM7101_WDT=y # CONFIG_SC520_WDT is not set CONFIG_I6300ESB_WDT=y # CONFIG_KEMPLD_WDT is not set # CONFIG_RDC321X_WDT is not set # CONFIG_BCM47XX_WDT is not set # CONFIG_BCM2835_WDT is not set # CONFIG_BCM_KONA_WDT is not set # CONFIG_BCM7038_WDT is not set # CONFIG_IMGPDC_WDT is not set # CONFIG_MPC5200_WDT is not set # CONFIG_MEN_A21_WDT is not set # CONFIG_UML_WATCHDOG is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y CONFIG_SSB=y CONFIG_SSB_PCIHOST_POSSIBLE=y # CONFIG_SSB_PCIHOST is not set # CONFIG_SSB_DRIVER_GPIO is not set CONFIG_BCMA_POSSIBLE=y # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=y # CONFIG_MFD_ACT8945A is not set # CONFIG_MFD_SUN4I_GPADC is not set # CONFIG_MFD_AS3711 is not set # CONFIG_MFD_AS3722 is not set CONFIG_PMIC_ADP5520=y CONFIG_MFD_AAT2870_CORE=y # CONFIG_MFD_AT91_USART is not set CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_ATMEL_HLCDC=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_BD9571MWV=y CONFIG_MFD_AXP20X=y CONFIG_MFD_AXP20X_I2C=y CONFIG_MFD_MADERA=y # CONFIG_MFD_MADERA_I2C is not set # CONFIG_MFD_MADERA_SPI is not set # CONFIG_MFD_CS47L15 is not set CONFIG_MFD_CS47L35=y CONFIG_MFD_CS47L85=y CONFIG_MFD_CS47L90=y CONFIG_MFD_CS47L92=y # CONFIG_MFD_ASIC3 is not set # CONFIG_PMIC_DA903X is not set CONFIG_PMIC_DA9052=y CONFIG_MFD_DA9052_SPI=y CONFIG_MFD_DA9052_I2C=y # CONFIG_MFD_DA9055 is not set CONFIG_MFD_DA9062=y # CONFIG_MFD_DA9063 is not set CONFIG_MFD_DA9150=y CONFIG_MFD_DLN2=y # CONFIG_MFD_ENE_KB3930 is not set # CONFIG_MFD_EXYNOS_LPASS is not set # CONFIG_MFD_GATEWORKS_GSC is not set CONFIG_MFD_MC13XXX=y CONFIG_MFD_MC13XXX_SPI=y CONFIG_MFD_MC13XXX_I2C=y # CONFIG_MFD_MP2629 is not set # CONFIG_MFD_MXS_LRADC is not set # CONFIG_MFD_MX25_TSADC is not set CONFIG_MFD_HI6421_PMIC=y CONFIG_MFD_HI6421_SPMI=y # CONFIG_MFD_HI655X_PMIC is not set CONFIG_HTC_PASIC3=y # CONFIG_HTC_I2CPLD is not set CONFIG_LPC_ICH=y CONFIG_LPC_SCH=y # CONFIG_INTEL_SOC_PMIC is not set # CONFIG_MFD_IQS62X is not set # CONFIG_MFD_JANZ_CMODIO is not set CONFIG_MFD_KEMPLD=y # CONFIG_MFD_88PM800 is not set CONFIG_MFD_88PM805=y # CONFIG_MFD_88PM860X is not set CONFIG_MFD_MAX14577=y # CONFIG_MFD_MAX77620 is not set CONFIG_MFD_MAX77650=y # CONFIG_MFD_MAX77686 is not set CONFIG_MFD_MAX77693=y # CONFIG_MFD_MAX77714 is not set # CONFIG_MFD_MAX77843 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set CONFIG_MFD_MAX8997=y # CONFIG_MFD_MAX8998 is not set CONFIG_MFD_MT6360=y CONFIG_MFD_MT6370=y # CONFIG_MFD_MT6397 is not set CONFIG_MFD_MENF21BMC=y CONFIG_MFD_OCELOT=y CONFIG_EZX_PCAP=y # CONFIG_MFD_CPCAP is not set CONFIG_MFD_VIPERBOARD=y CONFIG_MFD_NTXEC=y CONFIG_MFD_RETU=y CONFIG_MFD_PCF50633=y # CONFIG_PCF50633_ADC is not set CONFIG_PCF50633_GPIO=y # CONFIG_UCB1400_CORE is not set # CONFIG_MFD_PM8XXX is not set # CONFIG_MFD_SPMI_PMIC is not set # CONFIG_MFD_SY7636A is not set CONFIG_MFD_RDC321X=y CONFIG_MFD_RT4831=y CONFIG_MFD_RT5033=y CONFIG_MFD_RT5120=y CONFIG_MFD_RC5T583=y # CONFIG_MFD_RK808 is not set # CONFIG_MFD_RN5T618 is not set CONFIG_MFD_SEC_CORE=y CONFIG_MFD_SI476X_CORE=y # CONFIG_MFD_SL28CPLD is not set # CONFIG_MFD_SM501 is not set CONFIG_MFD_SKY81452=y # CONFIG_MFD_SC27XX_PMIC is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_SUN6I_PRCM is not set CONFIG_MFD_SYSCON=y # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_LP3943 is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_TI_LMU is not set CONFIG_MFD_PALMAS=y CONFIG_TPS6105X=y CONFIG_TPS65010=y CONFIG_TPS6507X=y # CONFIG_MFD_TPS65086 is not set CONFIG_MFD_TPS65090=y # CONFIG_MFD_TPS65217 is not set CONFIG_MFD_TI_LP873X=y CONFIG_MFD_TI_LP87565=y CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_TPS65912=y # CONFIG_MFD_TPS65912_I2C is not set CONFIG_MFD_TPS65912_SPI=y CONFIG_TWL4030_CORE=y # CONFIG_MFD_TWL4030_AUDIO is not set CONFIG_TWL6040_CORE=y CONFIG_MFD_WL1273_CORE=y # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TIMBERDALE is not set CONFIG_MFD_TC3589X=y CONFIG_MFD_TQMX86=y CONFIG_MFD_VX855=y CONFIG_MFD_LOCHNAGAR=y CONFIG_MFD_ARIZONA=y CONFIG_MFD_ARIZONA_I2C=y # CONFIG_MFD_ARIZONA_SPI is not set CONFIG_MFD_CS47L24=y # CONFIG_MFD_WM5102 is not set # CONFIG_MFD_WM5110 is not set # CONFIG_MFD_WM8997 is not set # CONFIG_MFD_WM8998 is not set CONFIG_MFD_WM8400=y CONFIG_MFD_WM831X=y CONFIG_MFD_WM831X_I2C=y CONFIG_MFD_WM831X_SPI=y CONFIG_MFD_WM8350=y CONFIG_MFD_WM8350_I2C=y CONFIG_MFD_WM8994=y # CONFIG_MFD_STW481X is not set # CONFIG_MFD_ROHM_BD718XX is not set CONFIG_MFD_ROHM_BD71828=y CONFIG_MFD_ROHM_BD957XMUF=y # CONFIG_MFD_STM32_LPTIMER is not set # CONFIG_MFD_STM32_TIMERS is not set # CONFIG_MFD_STPMIC1 is not set CONFIG_MFD_STMFX=y CONFIG_MFD_ATC260X=y CONFIG_MFD_ATC260X_I2C=y # CONFIG_MFD_KHADAS_MCU is not set # CONFIG_MFD_ACER_A500_EC is not set # CONFIG_MFD_QCOM_PM8008 is not set # CONFIG_RAVE_SP_CORE is not set CONFIG_MFD_INTEL_M10_BMC=y # CONFIG_MFD_RSMU_I2C is not set CONFIG_MFD_RSMU_SPI=y # end of Multifunction device drivers CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y CONFIG_REGULATOR_88PG86X=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_AD5398=y # CONFIG_REGULATOR_ANATOP is not set CONFIG_REGULATOR_AAT2870=y CONFIG_REGULATOR_ARIZONA_LDO1=y CONFIG_REGULATOR_ARIZONA_MICSUPP=y CONFIG_REGULATOR_ATC260X=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_BD71815=y CONFIG_REGULATOR_BD71828=y CONFIG_REGULATOR_BD9571MWV=y # CONFIG_REGULATOR_BD957XMUF is not set CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_DA9062=y CONFIG_REGULATOR_DA9121=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_DA9211=y CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_FAN53880=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI6421=y CONFIG_REGULATOR_HI6421V530=y CONFIG_REGULATOR_HI6421V600=y # CONFIG_REGULATOR_ISL9305 is not set CONFIG_REGULATOR_ISL6271A=y CONFIG_REGULATOR_LOCHNAGAR=y CONFIG_REGULATOR_LP3971=y CONFIG_REGULATOR_LP3972=y # CONFIG_REGULATOR_LP872X is not set # CONFIG_REGULATOR_LP873X is not set # CONFIG_REGULATOR_LP8755 is not set CONFIG_REGULATOR_LP87565=y CONFIG_REGULATOR_LTC3589=y # CONFIG_REGULATOR_LTC3676 is not set CONFIG_REGULATOR_MAX14577=y CONFIG_REGULATOR_MAX1586=y # CONFIG_REGULATOR_MAX77620 is not set # CONFIG_REGULATOR_MAX77650 is not set CONFIG_REGULATOR_MAX8649=y CONFIG_REGULATOR_MAX8660=y CONFIG_REGULATOR_MAX8893=y # CONFIG_REGULATOR_MAX8907 is not set # CONFIG_REGULATOR_MAX8952 is not set # CONFIG_REGULATOR_MAX8973 is not set CONFIG_REGULATOR_MAX8997=y CONFIG_REGULATOR_MAX20086=y # CONFIG_REGULATOR_MAX77686 is not set # CONFIG_REGULATOR_MAX77693 is not set # CONFIG_REGULATOR_MAX77802 is not set CONFIG_REGULATOR_MAX77826=y CONFIG_REGULATOR_MC13XXX_CORE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y # CONFIG_REGULATOR_MCP16502 is not set # CONFIG_REGULATOR_MP5416 is not set CONFIG_REGULATOR_MP8859=y # CONFIG_REGULATOR_MP886X is not set CONFIG_REGULATOR_MPQ7920=y # CONFIG_REGULATOR_MT6311 is not set # CONFIG_REGULATOR_MT6315 is not set CONFIG_REGULATOR_MT6360=y CONFIG_REGULATOR_MT6370=y # CONFIG_REGULATOR_PALMAS is not set # CONFIG_REGULATOR_PBIAS is not set # CONFIG_REGULATOR_PCA9450 is not set # CONFIG_REGULATOR_PCAP is not set # CONFIG_REGULATOR_PCF50633 is not set CONFIG_REGULATOR_PF8X00=y CONFIG_REGULATOR_PFUZE100=y CONFIG_REGULATOR_PV88060=y # CONFIG_REGULATOR_PV88080 is not set # CONFIG_REGULATOR_PV88090 is not set CONFIG_REGULATOR_PWM=y # CONFIG_REGULATOR_QCOM_RPMH is not set CONFIG_REGULATOR_QCOM_SPMI=y # CONFIG_REGULATOR_QCOM_USB_VBUS is not set CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y CONFIG_REGULATOR_RC5T583=y CONFIG_REGULATOR_ROHM=y CONFIG_REGULATOR_RT4801=y # CONFIG_REGULATOR_RT4831 is not set CONFIG_REGULATOR_RT5033=y # CONFIG_REGULATOR_RT5120 is not set # CONFIG_REGULATOR_RT5190A is not set CONFIG_REGULATOR_RT5759=y CONFIG_REGULATOR_RT6160=y CONFIG_REGULATOR_RT6245=y # CONFIG_REGULATOR_RTQ2134 is not set CONFIG_REGULATOR_RTMV20=y # CONFIG_REGULATOR_RTQ6752 is not set CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y # CONFIG_REGULATOR_SC2731 is not set CONFIG_REGULATOR_SKY81452=y CONFIG_REGULATOR_SLG51000=y # CONFIG_REGULATOR_STM32_BOOSTER is not set # CONFIG_REGULATOR_STM32_VREFBUF is not set # CONFIG_REGULATOR_STM32_PWR is not set # CONFIG_REGULATOR_TI_ABB is not set # CONFIG_REGULATOR_STW481X_VMMC is not set # CONFIG_REGULATOR_SY8106A is not set CONFIG_REGULATOR_SY8824X=y CONFIG_REGULATOR_SY8827N=y CONFIG_REGULATOR_TPS51632=y # CONFIG_REGULATOR_TPS6105X is not set # CONFIG_REGULATOR_TPS62360 is not set CONFIG_REGULATOR_TPS6286X=y # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set CONFIG_REGULATOR_TPS65090=y CONFIG_REGULATOR_TPS65132=y # CONFIG_REGULATOR_TPS65218 is not set # CONFIG_REGULATOR_TPS6524X is not set CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y # CONFIG_REGULATOR_TPS65912 is not set # CONFIG_REGULATOR_TPS68470 is not set # CONFIG_REGULATOR_TWL4030 is not set # CONFIG_REGULATOR_UNIPHIER is not set CONFIG_REGULATOR_VCTRL=y # CONFIG_REGULATOR_WM831X is not set # CONFIG_REGULATOR_WM8350 is not set # CONFIG_REGULATOR_WM8400 is not set # CONFIG_REGULATOR_WM8994 is not set CONFIG_REGULATOR_QCOM_LABIBB=y CONFIG_CEC_CORE=y # # CEC support # CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_CEC_CH7322=y # CONFIG_CEC_MESON_AO is not set # CONFIG_CEC_MESON_G12A_AO is not set # CONFIG_CEC_GPIO is not set # CONFIG_CEC_SAMSUNG_S5P is not set # CONFIG_CEC_STI is not set # CONFIG_CEC_STM32 is not set # CONFIG_CEC_TEGRA is not set # end of CEC support CONFIG_MEDIA_SUPPORT=y # CONFIG_MEDIA_SUPPORT_FILTER is not set CONFIG_MEDIA_SUBDRV_AUTOSELECT=y # # Media device types # CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_RADIO_SUPPORT=y CONFIG_MEDIA_SDR_SUPPORT=y CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_MEDIA_TEST_SUPPORT=y # end of Media device types # # Media core support # CONFIG_VIDEO_DEV=y CONFIG_MEDIA_CONTROLLER=y CONFIG_DVB_CORE=y # end of Media core support # # Video4Linux options # CONFIG_VIDEO_V4L2_I2C=y CONFIG_VIDEO_V4L2_SUBDEV_API=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y CONFIG_VIDEO_TUNER=y CONFIG_V4L2_MEM2MEM_DEV=y # CONFIG_V4L2_FLASH_LED_CLASS is not set CONFIG_V4L2_FWNODE=y CONFIG_V4L2_ASYNC=y # end of Video4Linux options # # Media controller options # # CONFIG_MEDIA_CONTROLLER_DVB is not set CONFIG_MEDIA_CONTROLLER_REQUEST_API=y # end of Media controller options # # Digital TV options # # CONFIG_DVB_MMAP is not set # CONFIG_DVB_NET is not set CONFIG_DVB_MAX_ADAPTERS=16 CONFIG_DVB_DYNAMIC_MINORS=y # CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set CONFIG_DVB_ULE_DEBUG=y # end of Digital TV options # # Media drivers # # # Media drivers # CONFIG_MEDIA_USB_SUPPORT=y # # Webcam devices # CONFIG_USB_GSPCA=y # CONFIG_USB_GSPCA_BENQ is not set CONFIG_USB_GSPCA_CONEX=y # CONFIG_USB_GSPCA_CPIA1 is not set CONFIG_USB_GSPCA_DTCS033=y # CONFIG_USB_GSPCA_ETOMS is not set CONFIG_USB_GSPCA_FINEPIX=y # CONFIG_USB_GSPCA_JEILINJ is not set CONFIG_USB_GSPCA_JL2005BCD=y CONFIG_USB_GSPCA_KINECT=y # CONFIG_USB_GSPCA_KONICA is not set CONFIG_USB_GSPCA_MARS=y CONFIG_USB_GSPCA_MR97310A=y # CONFIG_USB_GSPCA_NW80X is not set # CONFIG_USB_GSPCA_OV519 is not set # CONFIG_USB_GSPCA_OV534 is not set CONFIG_USB_GSPCA_OV534_9=y CONFIG_USB_GSPCA_PAC207=y CONFIG_USB_GSPCA_PAC7302=y CONFIG_USB_GSPCA_PAC7311=y # CONFIG_USB_GSPCA_SE401 is not set CONFIG_USB_GSPCA_SN9C2028=y CONFIG_USB_GSPCA_SN9C20X=y CONFIG_USB_GSPCA_SONIXB=y # CONFIG_USB_GSPCA_SONIXJ is not set # CONFIG_USB_GSPCA_SPCA1528 is not set CONFIG_USB_GSPCA_SPCA500=y # CONFIG_USB_GSPCA_SPCA501 is not set CONFIG_USB_GSPCA_SPCA505=y # CONFIG_USB_GSPCA_SPCA506 is not set # CONFIG_USB_GSPCA_SPCA508 is not set CONFIG_USB_GSPCA_SPCA561=y CONFIG_USB_GSPCA_SQ905=y # CONFIG_USB_GSPCA_SQ905C is not set CONFIG_USB_GSPCA_SQ930X=y # CONFIG_USB_GSPCA_STK014 is not set CONFIG_USB_GSPCA_STK1135=y CONFIG_USB_GSPCA_STV0680=y # CONFIG_USB_GSPCA_SUNPLUS is not set CONFIG_USB_GSPCA_T613=y # CONFIG_USB_GSPCA_TOPRO is not set # CONFIG_USB_GSPCA_TOUPTEK is not set CONFIG_USB_GSPCA_TV8532=y # CONFIG_USB_GSPCA_VC032X is not set # CONFIG_USB_GSPCA_VICAM is not set CONFIG_USB_GSPCA_XIRLINK_CIT=y CONFIG_USB_GSPCA_ZC3XX=y # CONFIG_USB_GL860 is not set # CONFIG_USB_M5602 is not set # CONFIG_USB_STV06XX is not set CONFIG_USB_PWC=y # CONFIG_USB_PWC_DEBUG is not set CONFIG_USB_S2255=y CONFIG_VIDEO_USBTV=y CONFIG_USB_VIDEO_CLASS=y # # Analog TV USB devices # CONFIG_VIDEO_GO7007=y # CONFIG_VIDEO_GO7007_USB is not set CONFIG_VIDEO_GO7007_LOADER=y # CONFIG_VIDEO_HDPVR is not set CONFIG_VIDEO_PVRUSB2=y CONFIG_VIDEO_PVRUSB2_SYSFS=y # CONFIG_VIDEO_PVRUSB2_DVB is not set # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set CONFIG_VIDEO_STK1160_COMMON=y CONFIG_VIDEO_STK1160=y # # Analog/digital TV USB devices # CONFIG_VIDEO_CX231XX=y CONFIG_VIDEO_CX231XX_ALSA=y # CONFIG_VIDEO_CX231XX_DVB is not set # # Digital TV USB devices # CONFIG_DVB_B2C2_FLEXCOP_USB=y CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y CONFIG_DVB_USB_V2=y CONFIG_DVB_USB_AF9015=y # CONFIG_DVB_USB_AF9035 is not set CONFIG_DVB_USB_ANYSEE=y # CONFIG_DVB_USB_AU6610 is not set CONFIG_DVB_USB_AZ6007=y # CONFIG_DVB_USB_CE6230 is not set CONFIG_DVB_USB_DVBSKY=y CONFIG_DVB_USB_EC168=y CONFIG_DVB_USB_GL861=y CONFIG_DVB_USB_MXL111SF=y # CONFIG_DVB_USB_RTL28XXU is not set CONFIG_DVB_USB_ZD1301=y # CONFIG_SMS_USB_DRV is not set CONFIG_DVB_TTUSB_BUDGET=y # # Webcam, TV (analog/digital) USB devices # CONFIG_VIDEO_EM28XX=y CONFIG_VIDEO_EM28XX_V4L2=y CONFIG_VIDEO_EM28XX_ALSA=y CONFIG_VIDEO_EM28XX_DVB=y # # Software defined radio USB devices # CONFIG_USB_AIRSPY=y CONFIG_USB_HACKRF=y CONFIG_USB_MSI2500=y # CONFIG_MEDIA_PCI_SUPPORT is not set CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_MAXIRADIO=y CONFIG_RADIO_SAA7706H=y CONFIG_RADIO_SHARK=y CONFIG_RADIO_SHARK2=y # CONFIG_RADIO_SI4713 is not set CONFIG_RADIO_SI476X=y CONFIG_RADIO_TEA575X=y CONFIG_RADIO_TEA5764=y CONFIG_RADIO_TEA5764_XTAL=y # CONFIG_RADIO_TEF6862 is not set CONFIG_RADIO_WL1273=y CONFIG_USB_DSBR=y CONFIG_USB_KEENE=y # CONFIG_USB_MA901 is not set # CONFIG_USB_MR800 is not set CONFIG_USB_RAREMONO=y CONFIG_RADIO_SI470X=y CONFIG_USB_SI470X=y CONFIG_I2C_SI470X=y # CONFIG_V4L_RADIO_ISA_DRIVERS is not set CONFIG_MEDIA_PLATFORM_DRIVERS=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SDR_PLATFORM_DRIVERS=y CONFIG_DVB_PLATFORM_DRIVERS=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y CONFIG_VIDEO_MUX=y # # Allegro DVT media platform drivers # # CONFIG_VIDEO_ALLEGRO_DVT is not set # # Amlogic media platform drivers # # CONFIG_VIDEO_MESON_GE2D is not set # # Amphion drivers # # # Aspeed media platform drivers # CONFIG_VIDEO_ASPEED=y # # Atmel media platform drivers # # CONFIG_VIDEO_ATMEL_ISC is not set # CONFIG_VIDEO_ATMEL_XISC is not set # CONFIG_VIDEO_ATMEL_ISI is not set # CONFIG_VIDEO_MICROCHIP_CSI2DC is not set # # Cadence media platform drivers # CONFIG_VIDEO_CADENCE_CSI2RX=y CONFIG_VIDEO_CADENCE_CSI2TX=y # # Chips&Media media platform drivers # # CONFIG_VIDEO_CODA is not set # # Intel media platform drivers # # CONFIG_VIDEO_PXA27x is not set # # Marvell media platform drivers # # CONFIG_VIDEO_CAFE_CCIC is not set # CONFIG_VIDEO_MMP_CAMERA is not set # # Mediatek media platform drivers # # CONFIG_VIDEO_MEDIATEK_JPEG is not set # CONFIG_VIDEO_MEDIATEK_MDP is not set # CONFIG_VIDEO_MEDIATEK_VPU is not set # CONFIG_VIDEO_MEDIATEK_MDP3 is not set # # NVidia media platform drivers # # CONFIG_VIDEO_TEGRA_VDE is not set # # NXP media platform drivers # # CONFIG_VIDEO_IMX_MIPI_CSIS is not set # CONFIG_VIDEO_IMX_PXP is not set # CONFIG_VIDEO_MX2_EMMAPRP is not set # CONFIG_VIDEO_DW100 is not set # CONFIG_VIDEO_IMX8_JPEG is not set # # Qualcomm media platform drivers # # CONFIG_VIDEO_QCOM_CAMSS is not set # # Renesas media platform drivers # # CONFIG_VIDEO_RENESAS_CEU is not set # CONFIG_VIDEO_RCAR_ISP is not set # CONFIG_VIDEO_SH_VOU is not set # CONFIG_VIDEO_RCAR_CSI2 is not set # CONFIG_VIDEO_RCAR_VIN is not set # CONFIG_VIDEO_RENESAS_FCP is not set # CONFIG_VIDEO_RENESAS_FDP1 is not set # CONFIG_VIDEO_RENESAS_JPU is not set # CONFIG_VIDEO_RENESAS_VSP1 is not set # CONFIG_VIDEO_RCAR_DRIF is not set # # Rockchip media platform drivers # # CONFIG_VIDEO_ROCKCHIP_RGA is not set # CONFIG_VIDEO_ROCKCHIP_ISP1 is not set # # Samsung media platform drivers # # CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set # CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set # CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set # CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set # CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set # # STMicroelectronics media platform drivers # # CONFIG_VIDEO_STI_BDISP is not set # CONFIG_DVB_C8SECTPFE is not set # CONFIG_VIDEO_STI_DELTA is not set # CONFIG_VIDEO_STI_HVA is not set # CONFIG_VIDEO_STM32_DCMI is not set # CONFIG_VIDEO_STM32_DMA2D is not set # # Sunxi media platform drivers # # CONFIG_VIDEO_SUN4I_CSI is not set # # Texas Instruments drivers # # CONFIG_VIDEO_TI_CAL is not set # CONFIG_VIDEO_TI_VPE is not set # CONFIG_VIDEO_AM437X_VPFE is not set # CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY is not set # CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE is not set # CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY is not set # CONFIG_VIDEO_OMAP2_VOUT is not set # CONFIG_VIDEO_OMAP3 is not set # # Verisilicon media platform drivers # # CONFIG_VIDEO_HANTRO is not set # # VIA media platform drivers # # # Xilinx media platform drivers # CONFIG_VIDEO_XILINX=y # CONFIG_VIDEO_XILINX_CSI2RXSS is not set CONFIG_VIDEO_XILINX_TPG=y CONFIG_VIDEO_XILINX_VTC=y CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIM2M=y # CONFIG_VIDEO_VICODEC is not set CONFIG_VIDEO_VIMC=y CONFIG_VIDEO_VIVID=y # CONFIG_VIDEO_VIVID_CEC is not set CONFIG_VIDEO_VIVID_MAX_DEVS=64 CONFIG_DVB_TEST_DRIVERS=y CONFIG_DVB_VIDTV=y # # FireWire (IEEE 1394) Adapters # CONFIG_DVB_FIREDTV=y CONFIG_CYPRESS_FIRMWARE=y CONFIG_VIDEO_CX2341X=y CONFIG_VIDEO_TVEEPROM=y CONFIG_DVB_B2C2_FLEXCOP=y CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y CONFIG_VIDEO_V4L2_TPG=y CONFIG_VIDEOBUF2_CORE=y CONFIG_VIDEOBUF2_V4L2=y CONFIG_VIDEOBUF2_MEMOPS=y CONFIG_VIDEOBUF2_DMA_CONTIG=y CONFIG_VIDEOBUF2_VMALLOC=y CONFIG_VIDEOBUF2_DMA_SG=y # end of Media drivers # # Media ancillary drivers # # # Camera sensor devices # CONFIG_VIDEO_APTINA_PLL=y CONFIG_VIDEO_AR0521=y CONFIG_VIDEO_HI556=y CONFIG_VIDEO_HI846=y CONFIG_VIDEO_HI847=y CONFIG_VIDEO_IMX208=y CONFIG_VIDEO_IMX214=y CONFIG_VIDEO_IMX219=y CONFIG_VIDEO_IMX258=y # CONFIG_VIDEO_IMX274 is not set CONFIG_VIDEO_IMX290=y CONFIG_VIDEO_IMX319=y CONFIG_VIDEO_IMX334=y # CONFIG_VIDEO_IMX335 is not set CONFIG_VIDEO_IMX355=y # CONFIG_VIDEO_IMX412 is not set CONFIG_VIDEO_MAX9271_LIB=y CONFIG_VIDEO_MT9M001=y # CONFIG_VIDEO_MT9M032 is not set CONFIG_VIDEO_MT9M111=y CONFIG_VIDEO_MT9P031=y CONFIG_VIDEO_MT9T001=y # CONFIG_VIDEO_MT9T112 is not set CONFIG_VIDEO_MT9V011=y CONFIG_VIDEO_MT9V032=y # CONFIG_VIDEO_MT9V111 is not set CONFIG_VIDEO_NOON010PC30=y CONFIG_VIDEO_OG01A1B=y CONFIG_VIDEO_OV02A10=y CONFIG_VIDEO_OV08D10=y # CONFIG_VIDEO_OV13858 is not set # CONFIG_VIDEO_OV13B10 is not set CONFIG_VIDEO_OV2640=y CONFIG_VIDEO_OV2659=y # CONFIG_VIDEO_OV2680 is not set # CONFIG_VIDEO_OV2685 is not set # CONFIG_VIDEO_OV2740 is not set CONFIG_VIDEO_OV5640=y CONFIG_VIDEO_OV5645=y CONFIG_VIDEO_OV5647=y CONFIG_VIDEO_OV5670=y CONFIG_VIDEO_OV5675=y CONFIG_VIDEO_OV5693=y CONFIG_VIDEO_OV5695=y CONFIG_VIDEO_OV6650=y # CONFIG_VIDEO_OV7251 is not set CONFIG_VIDEO_OV7640=y # CONFIG_VIDEO_OV7670 is not set CONFIG_VIDEO_OV772X=y CONFIG_VIDEO_OV7740=y # CONFIG_VIDEO_OV8856 is not set # CONFIG_VIDEO_OV9282 is not set CONFIG_VIDEO_OV9640=y # CONFIG_VIDEO_OV9650 is not set # CONFIG_VIDEO_OV9734 is not set CONFIG_VIDEO_RDACM20=y # CONFIG_VIDEO_RDACM21 is not set # CONFIG_VIDEO_RJ54N1 is not set CONFIG_VIDEO_S5C73M3=y CONFIG_VIDEO_S5K4ECGX=y # CONFIG_VIDEO_S5K5BAF is not set CONFIG_VIDEO_S5K6A3=y # CONFIG_VIDEO_S5K6AA is not set CONFIG_VIDEO_SR030PC30=y # CONFIG_VIDEO_VS6624 is not set # CONFIG_VIDEO_CCS is not set # CONFIG_VIDEO_ET8EK8 is not set # CONFIG_VIDEO_M5MOLS is not set # end of Camera sensor devices # # Lens drivers # # CONFIG_VIDEO_AD5820 is not set CONFIG_VIDEO_AK7375=y CONFIG_VIDEO_DW9714=y CONFIG_VIDEO_DW9768=y # CONFIG_VIDEO_DW9807_VCM is not set # end of Lens drivers # # Flash devices # CONFIG_VIDEO_ADP1653=y CONFIG_VIDEO_LM3560=y # CONFIG_VIDEO_LM3646 is not set # end of Flash devices # # Audio decoders, processors and mixers # # CONFIG_VIDEO_CS3308 is not set # CONFIG_VIDEO_CS5345 is not set CONFIG_VIDEO_CS53L32A=y CONFIG_VIDEO_MSP3400=y CONFIG_VIDEO_SONY_BTF_MPX=y CONFIG_VIDEO_TDA1997X=y # CONFIG_VIDEO_TDA7432 is not set CONFIG_VIDEO_TDA9840=y # CONFIG_VIDEO_TEA6415C is not set CONFIG_VIDEO_TEA6420=y # CONFIG_VIDEO_TLV320AIC23B is not set # CONFIG_VIDEO_TVAUDIO is not set CONFIG_VIDEO_UDA1342=y # CONFIG_VIDEO_VP27SMPX is not set CONFIG_VIDEO_WM8739=y CONFIG_VIDEO_WM8775=y # end of Audio decoders, processors and mixers # # RDS decoders # CONFIG_VIDEO_SAA6588=y # end of RDS decoders # # Video decoders # CONFIG_VIDEO_ADV7180=y CONFIG_VIDEO_ADV7183=y CONFIG_VIDEO_ADV748X=y CONFIG_VIDEO_ADV7604=y # CONFIG_VIDEO_ADV7604_CEC is not set CONFIG_VIDEO_ADV7842=y CONFIG_VIDEO_ADV7842_CEC=y # CONFIG_VIDEO_BT819 is not set CONFIG_VIDEO_BT856=y # CONFIG_VIDEO_BT866 is not set # CONFIG_VIDEO_ISL7998X is not set CONFIG_VIDEO_KS0127=y CONFIG_VIDEO_MAX9286=y # CONFIG_VIDEO_ML86V7667 is not set # CONFIG_VIDEO_SAA7110 is not set CONFIG_VIDEO_SAA711X=y # CONFIG_VIDEO_TC358743 is not set CONFIG_VIDEO_TVP514X=y CONFIG_VIDEO_TVP5150=y # CONFIG_VIDEO_TVP7002 is not set CONFIG_VIDEO_TW2804=y CONFIG_VIDEO_TW9903=y CONFIG_VIDEO_TW9906=y # CONFIG_VIDEO_TW9910 is not set # CONFIG_VIDEO_VPX3220 is not set # # Video and audio decoders # # CONFIG_VIDEO_SAA717X is not set CONFIG_VIDEO_CX25840=y # end of Video decoders # # Video encoders # CONFIG_VIDEO_AD9389B=y CONFIG_VIDEO_ADV7170=y # CONFIG_VIDEO_ADV7175 is not set # CONFIG_VIDEO_ADV7343 is not set CONFIG_VIDEO_ADV7393=y # CONFIG_VIDEO_ADV7511 is not set # CONFIG_VIDEO_AK881X is not set # CONFIG_VIDEO_SAA7127 is not set CONFIG_VIDEO_SAA7185=y CONFIG_VIDEO_THS8200=y # end of Video encoders # # Video improvement chips # CONFIG_VIDEO_UPD64031A=y CONFIG_VIDEO_UPD64083=y # end of Video improvement chips # # Audio/Video compression chips # CONFIG_VIDEO_SAA6752HS=y # end of Audio/Video compression chips # # SDR tuner chips # CONFIG_SDR_MAX2175=y # end of SDR tuner chips # # Miscellaneous helper chips # CONFIG_VIDEO_I2C=y CONFIG_VIDEO_M52790=y CONFIG_VIDEO_ST_MIPID02=y CONFIG_VIDEO_THS7303=y # end of Miscellaneous helper chips # # Media SPI Adapters # CONFIG_CXD2880_SPI_DRV=y CONFIG_VIDEO_GS1662=y # end of Media SPI Adapters CONFIG_MEDIA_TUNER=y # # Customize TV tuners # CONFIG_MEDIA_TUNER_E4000=y # CONFIG_MEDIA_TUNER_FC0011 is not set CONFIG_MEDIA_TUNER_FC0012=y # CONFIG_MEDIA_TUNER_FC0013 is not set # CONFIG_MEDIA_TUNER_FC2580 is not set CONFIG_MEDIA_TUNER_IT913X=y # CONFIG_MEDIA_TUNER_M88RS6000T is not set CONFIG_MEDIA_TUNER_MAX2165=y CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_MEDIA_TUNER_MSI001=y CONFIG_MEDIA_TUNER_MT2060=y CONFIG_MEDIA_TUNER_MT2063=y CONFIG_MEDIA_TUNER_MT20XX=y # CONFIG_MEDIA_TUNER_MT2131 is not set CONFIG_MEDIA_TUNER_MT2266=y # CONFIG_MEDIA_TUNER_MXL301RF is not set CONFIG_MEDIA_TUNER_MXL5005S=y CONFIG_MEDIA_TUNER_MXL5007T=y # CONFIG_MEDIA_TUNER_QM1D1B0004 is not set CONFIG_MEDIA_TUNER_QM1D1C0042=y CONFIG_MEDIA_TUNER_QT1010=y CONFIG_MEDIA_TUNER_R820T=y CONFIG_MEDIA_TUNER_SI2157=y CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA18212=y CONFIG_MEDIA_TUNER_TDA18218=y CONFIG_MEDIA_TUNER_TDA18250=y CONFIG_MEDIA_TUNER_TDA18271=y CONFIG_MEDIA_TUNER_TDA827X=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA9887=y CONFIG_MEDIA_TUNER_TEA5761=y CONFIG_MEDIA_TUNER_TEA5767=y CONFIG_MEDIA_TUNER_TUA9001=y CONFIG_MEDIA_TUNER_XC2028=y CONFIG_MEDIA_TUNER_XC4000=y CONFIG_MEDIA_TUNER_XC5000=y # end of Customize TV tuners # # Customise DVB Frontends # # # Multistandard (satellite) frontends # CONFIG_DVB_M88DS3103=y CONFIG_DVB_MXL5XX=y # CONFIG_DVB_STB0899 is not set CONFIG_DVB_STB6100=y CONFIG_DVB_STV090x=y CONFIG_DVB_STV0910=y # CONFIG_DVB_STV6110x is not set # CONFIG_DVB_STV6111 is not set # # Multistandard (cable + terrestrial) frontends # CONFIG_DVB_DRXK=y CONFIG_DVB_MN88472=y # CONFIG_DVB_MN88473 is not set CONFIG_DVB_SI2165=y CONFIG_DVB_TDA18271C2DD=y # # DVB-S (satellite) frontends # CONFIG_DVB_CX24110=y CONFIG_DVB_CX24116=y CONFIG_DVB_CX24117=y CONFIG_DVB_CX24120=y CONFIG_DVB_CX24123=y # CONFIG_DVB_DS3000 is not set CONFIG_DVB_MB86A16=y CONFIG_DVB_MT312=y CONFIG_DVB_S5H1420=y # CONFIG_DVB_SI21XX is not set CONFIG_DVB_STB6000=y CONFIG_DVB_STV0288=y CONFIG_DVB_STV0299=y CONFIG_DVB_STV0900=y CONFIG_DVB_STV6110=y CONFIG_DVB_TDA10071=y # CONFIG_DVB_TDA10086 is not set CONFIG_DVB_TDA8083=y CONFIG_DVB_TDA8261=y CONFIG_DVB_TDA826X=y CONFIG_DVB_TS2020=y CONFIG_DVB_TUA6100=y CONFIG_DVB_TUNER_CX24113=y CONFIG_DVB_TUNER_ITD1000=y CONFIG_DVB_VES1X93=y CONFIG_DVB_ZL10036=y CONFIG_DVB_ZL10039=y # # DVB-T (terrestrial) frontends # CONFIG_DVB_AF9013=y CONFIG_DVB_CX22700=y CONFIG_DVB_CX22702=y CONFIG_DVB_CXD2820R=y CONFIG_DVB_CXD2841ER=y CONFIG_DVB_DIB3000MB=y CONFIG_DVB_DIB3000MC=y CONFIG_DVB_DIB7000M=y CONFIG_DVB_DIB7000P=y # CONFIG_DVB_DIB9000 is not set CONFIG_DVB_DRXD=y CONFIG_DVB_EC100=y CONFIG_DVB_L64781=y CONFIG_DVB_MT352=y # CONFIG_DVB_NXT6000 is not set CONFIG_DVB_RTL2830=y CONFIG_DVB_RTL2832=y CONFIG_DVB_RTL2832_SDR=y # CONFIG_DVB_S5H1432 is not set CONFIG_DVB_SI2168=y CONFIG_DVB_SP887X=y # CONFIG_DVB_STV0367 is not set # CONFIG_DVB_TDA10048 is not set CONFIG_DVB_TDA1004X=y CONFIG_DVB_ZD1301_DEMOD=y CONFIG_DVB_ZL10353=y CONFIG_DVB_CXD2880=y # # DVB-C (cable) frontends # CONFIG_DVB_STV0297=y CONFIG_DVB_TDA10021=y CONFIG_DVB_TDA10023=y CONFIG_DVB_VES1820=y # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # # CONFIG_DVB_AU8522_DTV is not set # CONFIG_DVB_AU8522_V4L is not set CONFIG_DVB_BCM3510=y CONFIG_DVB_LG2160=y CONFIG_DVB_LGDT3305=y CONFIG_DVB_LGDT3306A=y CONFIG_DVB_LGDT330X=y CONFIG_DVB_MXL692=y CONFIG_DVB_NXT200X=y CONFIG_DVB_OR51132=y CONFIG_DVB_OR51211=y CONFIG_DVB_S5H1409=y # CONFIG_DVB_S5H1411 is not set # # ISDB-T (terrestrial) frontends # CONFIG_DVB_DIB8000=y CONFIG_DVB_MB86A20S=y CONFIG_DVB_S921=y # # ISDB-S (satellite) & ISDB-T (terrestrial) frontends # CONFIG_DVB_MN88443X=y CONFIG_DVB_TC90522=y # # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=y # CONFIG_DVB_TUNER_DIB0070 is not set # CONFIG_DVB_TUNER_DIB0090 is not set # # SEC control devices for DVB-S # CONFIG_DVB_A8293=y # CONFIG_DVB_AF9033 is not set CONFIG_DVB_ASCOT2E=y CONFIG_DVB_ATBM8830=y CONFIG_DVB_HELENE=y CONFIG_DVB_HORUS3A=y CONFIG_DVB_ISL6405=y CONFIG_DVB_ISL6421=y CONFIG_DVB_ISL6423=y CONFIG_DVB_IX2505V=y CONFIG_DVB_LGS8GL5=y # CONFIG_DVB_LGS8GXX is not set CONFIG_DVB_LNBH25=y CONFIG_DVB_LNBH29=y CONFIG_DVB_LNBP21=y CONFIG_DVB_LNBP22=y CONFIG_DVB_M88RS2000=y CONFIG_DVB_TDA665x=y CONFIG_DVB_DRX39XYJ=y # # Common Interface (EN50221) controller drivers # # CONFIG_DVB_CXD2099 is not set CONFIG_DVB_SP2=y # end of Customise DVB Frontends # # Tools to develop new frontends # CONFIG_DVB_DUMMY_FE=y # end of Media ancillary drivers # # Graphics support # CONFIG_APERTURE_HELPERS=y # CONFIG_IMX_IPUV3_CORE is not set CONFIG_DRM=y CONFIG_DRM_MIPI_DBI=y CONFIG_DRM_MIPI_DSI=y # CONFIG_DRM_DEBUG_MM is not set # CONFIG_DRM_KUNIT_TEST is not set CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y # CONFIG_DRM_DEBUG_MODESET_LOCK is not set CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set CONFIG_DRM_DP_AUX_BUS=y CONFIG_DRM_DISPLAY_HELPER=y CONFIG_DRM_DISPLAY_DP_HELPER=y CONFIG_DRM_DISPLAY_HDCP_HELPER=y CONFIG_DRM_DISPLAY_HDMI_HELPER=y CONFIG_DRM_DP_AUX_CHARDEV=y # CONFIG_DRM_DP_CEC is not set CONFIG_DRM_TTM=y CONFIG_DRM_VRAM_HELPER=y CONFIG_DRM_TTM_HELPER=y CONFIG_DRM_GEM_DMA_HELPER=y CONFIG_DRM_GEM_SHMEM_HELPER=y # # I2C encoder or helper chips # CONFIG_DRM_I2C_CH7006=y # CONFIG_DRM_I2C_SIL164 is not set # CONFIG_DRM_I2C_NXP_TDA998X is not set # CONFIG_DRM_I2C_NXP_TDA9950 is not set # end of I2C encoder or helper chips # # ARM devices # # CONFIG_DRM_HDLCD is not set # CONFIG_DRM_MALI_DISPLAY is not set CONFIG_DRM_KOMEDA=y # end of ARM devices # CONFIG_DRM_RADEON is not set # CONFIG_DRM_AMDGPU is not set CONFIG_DRM_NOUVEAU=y CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y CONFIG_NOUVEAU_DEBUG=5 CONFIG_NOUVEAU_DEBUG_DEFAULT=3 # CONFIG_NOUVEAU_DEBUG_MMU is not set # CONFIG_NOUVEAU_DEBUG_PUSH is not set CONFIG_DRM_NOUVEAU_BACKLIGHT=y # CONFIG_DRM_KMB_DISPLAY is not set CONFIG_DRM_VGEM=y CONFIG_DRM_VKMS=y # CONFIG_DRM_EXYNOS is not set # CONFIG_DRM_UDL is not set # CONFIG_DRM_AST is not set CONFIG_DRM_MGAG200=y # CONFIG_DRM_RCAR_DW_HDMI is not set CONFIG_DRM_RCAR_USE_LVDS=y # CONFIG_DRM_RCAR_USE_MIPI_DSI is not set # CONFIG_DRM_SUN4I is not set CONFIG_DRM_QXL=y CONFIG_DRM_PANEL=y # # Display Panels # # CONFIG_DRM_PANEL_ABT_Y030XX067A is not set CONFIG_DRM_PANEL_ARM_VERSATILE=y CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y # CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y # CONFIG_DRM_PANEL_DSI_CM is not set # CONFIG_DRM_PANEL_LVDS is not set # CONFIG_DRM_PANEL_EBBG_FT8719 is not set # CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y CONFIG_DRM_PANEL_ILITEK_IL9322=y CONFIG_DRM_PANEL_ILITEK_ILI9341=y CONFIG_DRM_PANEL_ILITEK_ILI9881C=y CONFIG_DRM_PANEL_INNOLUX_EJ030NA=y CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y CONFIG_DRM_PANEL_JDI_LT070ME05000=y CONFIG_DRM_PANEL_JDI_R63452=y CONFIG_DRM_PANEL_KHADAS_TS050=y CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set CONFIG_DRM_PANEL_LG_LB035Q02=y CONFIG_DRM_PANEL_LG_LG4573=y # CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set CONFIG_DRM_PANEL_NEWVISION_NV3052C=y # CONFIG_DRM_PANEL_NOVATEK_NT35510 is not set # CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set CONFIG_DRM_PANEL_NOVATEK_NT35950=y # CONFIG_DRM_PANEL_NOVATEK_NT36672A is not set CONFIG_DRM_PANEL_NOVATEK_NT39016=y # CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y # CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y # CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set # CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set # CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set CONFIG_DRM_PANEL_RAYDIUM_RM68200=y CONFIG_DRM_PANEL_RONBO_RB070D30=y # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y # CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y # CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI is not set # CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI is not set CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y CONFIG_DRM_PANEL_SEIKO_43WVF1G=y CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y # CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set CONFIG_DRM_PANEL_SHARP_LS060T1SX01=y # CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set CONFIG_DRM_PANEL_SITRONIX_ST7703=y CONFIG_DRM_PANEL_SITRONIX_ST7789V=y CONFIG_DRM_PANEL_SONY_ACX565AKM=y # CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521 is not set CONFIG_DRM_PANEL_TDO_TL070WSH30=y CONFIG_DRM_PANEL_TPO_TD028TTEC1=y CONFIG_DRM_PANEL_TPO_TD043MTEA1=y CONFIG_DRM_PANEL_TPO_TPG110=y CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y CONFIG_DRM_PANEL_VISIONOX_RM69299=y CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y CONFIG_DRM_PANEL_XINPENG_XPP055C272=y # end of Display Panels CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y # # Display Interface Bridges # CONFIG_DRM_CDNS_DSI=y CONFIG_DRM_CHIPONE_ICN6211=y # CONFIG_DRM_CHRONTEL_CH7033 is not set # CONFIG_DRM_CROS_EC_ANX7688 is not set CONFIG_DRM_DISPLAY_CONNECTOR=y # CONFIG_DRM_FSL_LDB is not set # CONFIG_DRM_ITE_IT6505 is not set CONFIG_DRM_LONTIUM_LT8912B=y # CONFIG_DRM_LONTIUM_LT9211 is not set # CONFIG_DRM_LONTIUM_LT9611 is not set # CONFIG_DRM_LONTIUM_LT9611UXC is not set CONFIG_DRM_ITE_IT66121=y CONFIG_DRM_LVDS_CODEC=y CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y CONFIG_DRM_NWL_MIPI_DSI=y CONFIG_DRM_NXP_PTN3460=y CONFIG_DRM_PARADE_PS8622=y # CONFIG_DRM_PARADE_PS8640 is not set CONFIG_DRM_SIL_SII8620=y CONFIG_DRM_SII902X=y CONFIG_DRM_SII9234=y CONFIG_DRM_SIMPLE_BRIDGE=y # CONFIG_DRM_THINE_THC63LVD1024 is not set CONFIG_DRM_TOSHIBA_TC358762=y CONFIG_DRM_TOSHIBA_TC358764=y # CONFIG_DRM_TOSHIBA_TC358767 is not set CONFIG_DRM_TOSHIBA_TC358768=y # CONFIG_DRM_TOSHIBA_TC358775 is not set # CONFIG_DRM_TI_DLPC3433 is not set CONFIG_DRM_TI_TFP410=y CONFIG_DRM_TI_SN65DSI83=y CONFIG_DRM_TI_SN65DSI86=y # CONFIG_DRM_TI_TPD12S015 is not set CONFIG_DRM_ANALOGIX_ANX6345=y # CONFIG_DRM_ANALOGIX_ANX78XX is not set CONFIG_DRM_ANALOGIX_DP=y CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_DRM_I2C_ADV7511=y # CONFIG_DRM_I2C_ADV7511_AUDIO is not set # CONFIG_DRM_I2C_ADV7511_CEC is not set # CONFIG_DRM_CDNS_MHDP8546 is not set # CONFIG_DRM_IMX8QM_LDB is not set # CONFIG_DRM_IMX8QXP_LDB is not set # CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set # CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set # end of Display Interface Bridges # CONFIG_DRM_INGENIC is not set # CONFIG_DRM_V3D is not set # CONFIG_DRM_ETNAVIV is not set # CONFIG_DRM_HISI_HIBMC is not set CONFIG_DRM_LOGICVC=y CONFIG_DRM_MXS=y # CONFIG_DRM_MXSFB is not set CONFIG_DRM_IMX_LCDIF=y # CONFIG_DRM_ARCPGU is not set CONFIG_DRM_BOCHS=y # CONFIG_DRM_CIRRUS_QEMU is not set CONFIG_DRM_GM12U320=y CONFIG_DRM_PANEL_MIPI_DBI=y CONFIG_DRM_SIMPLEDRM=y CONFIG_TINYDRM_HX8357D=y CONFIG_TINYDRM_ILI9163=y CONFIG_TINYDRM_ILI9225=y CONFIG_TINYDRM_ILI9341=y # CONFIG_TINYDRM_ILI9486 is not set # CONFIG_TINYDRM_MI0283QT is not set CONFIG_TINYDRM_REPAPER=y CONFIG_TINYDRM_ST7586=y CONFIG_TINYDRM_ST7735R=y # CONFIG_DRM_PL111 is not set # CONFIG_DRM_TVE200 is not set # CONFIG_DRM_LIMA is not set # CONFIG_DRM_ASPEED_GFX is not set # CONFIG_DRM_MCDE is not set # CONFIG_DRM_TIDSS is not set CONFIG_DRM_GUD=y # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_SPRD is not set CONFIG_DRM_LEGACY=y CONFIG_DRM_TDFX=y # CONFIG_DRM_R128 is not set # CONFIG_DRM_MGA is not set CONFIG_DRM_VIA=y CONFIG_DRM_SAVAGE=y CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y CONFIG_DRM_NOMODESET=y # # Frame buffer Devices # CONFIG_FB_CMDLINE=y CONFIG_FB_NOTIFY=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y CONFIG_FB_FOREIGN_ENDIAN=y # CONFIG_FB_BOTH_ENDIAN is not set # CONFIG_FB_BIG_ENDIAN is not set CONFIG_FB_LITTLE_ENDIAN=y CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=y CONFIG_FB_SVGALIB=y CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set CONFIG_FB_PM2=y CONFIG_FB_PM2_FIFO_DISCONNECT=y # CONFIG_FB_CLPS711X is not set # CONFIG_FB_IMX is not set CONFIG_FB_CYBER2000=y CONFIG_FB_CYBER2000_DDC=y # CONFIG_FB_ARC is not set # CONFIG_FB_CONTROL is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_UVESA=y # CONFIG_FB_GBE is not set # CONFIG_FB_PVR2 is not set CONFIG_FB_OPENCORES=y CONFIG_FB_S1D13XXX=y # CONFIG_FB_ATMEL is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_I740=y # CONFIG_FB_MATROX is not set CONFIG_FB_RADEON=y # CONFIG_FB_RADEON_I2C is not set # CONFIG_FB_RADEON_BACKLIGHT is not set CONFIG_FB_RADEON_DEBUG=y CONFIG_FB_ATY128=y CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y CONFIG_FB_ATY_GENERIC_LCD=y CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y CONFIG_FB_S3=y # CONFIG_FB_S3_DDC is not set CONFIG_FB_SAVAGE=y CONFIG_FB_SAVAGE_I2C=y # CONFIG_FB_SAVAGE_ACCEL is not set CONFIG_FB_SIS=y CONFIG_FB_SIS_300=y # CONFIG_FB_SIS_315 is not set # CONFIG_FB_VIA is not set CONFIG_FB_NEOMAGIC=y CONFIG_FB_KYRO=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set CONFIG_FB_VT8623=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_WM8505 is not set # CONFIG_FB_PXA168 is not set # CONFIG_FB_W100 is not set # CONFIG_FB_SH_MOBILE_LCDC is not set # CONFIG_FB_TMIO is not set # CONFIG_FB_S3C is not set CONFIG_FB_SMSCUFX=y CONFIG_FB_UDL=y CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_GOLDFISH is not set # CONFIG_FB_DA8XX is not set CONFIG_FB_VIRTUAL=y # CONFIG_FB_METRONOME is not set CONFIG_FB_MB862XX=y CONFIG_FB_MB862XX_PCI_GDC=y CONFIG_FB_MB862XX_I2C=y # CONFIG_FB_BROADSHEET is not set CONFIG_FB_SSD1307=y # CONFIG_FB_SM712 is not set CONFIG_FB_OMAP_LCD_H3=y # CONFIG_FB_OMAP2 is not set # CONFIG_MMP_DISP is not set # end of Frame buffer Devices # # Backlight & LCD device support # # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_KTD253=y # CONFIG_BACKLIGHT_OMAP1 is not set CONFIG_BACKLIGHT_PWM=y # CONFIG_BACKLIGHT_DA9052 is not set CONFIG_BACKLIGHT_MT6370=y CONFIG_BACKLIGHT_QCOM_WLED=y CONFIG_BACKLIGHT_RT4831=y CONFIG_BACKLIGHT_WM831X=y CONFIG_BACKLIGHT_ADP5520=y CONFIG_BACKLIGHT_ADP8860=y CONFIG_BACKLIGHT_ADP8870=y CONFIG_BACKLIGHT_PCF50633=y CONFIG_BACKLIGHT_AAT2870=y # CONFIG_BACKLIGHT_LM3630A is not set CONFIG_BACKLIGHT_LM3639=y CONFIG_BACKLIGHT_LP855X=y # CONFIG_BACKLIGHT_PANDORA is not set CONFIG_BACKLIGHT_SKY81452=y CONFIG_BACKLIGHT_GPIO=y CONFIG_BACKLIGHT_LV5207LP=y CONFIG_BACKLIGHT_BD6107=y # CONFIG_BACKLIGHT_ARCXCNN is not set CONFIG_BACKLIGHT_LED=y # end of Backlight & LCD device support CONFIG_VGASTATE=y CONFIG_VIDEOMODE_HELPERS=y CONFIG_HDMI=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set # end of Graphics support CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_PCM_ELD=y CONFIG_SND_PCM_IEC958=y CONFIG_SND_DMAENGINE_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=y CONFIG_SND_COMPRESS_OFFLOAD=y CONFIG_SND_JACK=y # CONFIG_SND_OSSEMUL is not set # CONFIG_SND_PCM_TIMER is not set CONFIG_SND_HRTIMER=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_MAX_CARDS=32 # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_PROC_FS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_CTL_FAST_LOOKUP is not set # CONFIG_SND_DEBUG is not set # CONFIG_SND_CTL_INPUT_VALIDATION is not set CONFIG_SND_VMASTER=y CONFIG_SND_CTL_LED=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=y # CONFIG_SND_ALOOP is not set # CONFIG_SND_MTPAV is not set CONFIG_SND_MTS64=y # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_SERIAL_GENERIC=y # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 # CONFIG_SND_PCI is not set # # HD-Audio # CONFIG_SND_HDA=y CONFIG_SND_HDA_GENERIC_LEDS=y # CONFIG_SND_HDA_HWDEP is not set CONFIG_SND_HDA_RECONFIG=y # CONFIG_SND_HDA_PATCH_LOADER is not set # CONFIG_SND_HDA_CODEC_REALTEK is not set # CONFIG_SND_HDA_CODEC_ANALOG is not set CONFIG_SND_HDA_CODEC_SIGMATEL=y # CONFIG_SND_HDA_CODEC_VIA is not set CONFIG_SND_HDA_CODEC_HDMI=y # CONFIG_SND_HDA_CODEC_CIRRUS is not set CONFIG_SND_HDA_CODEC_CS8409=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CA0132=y # CONFIG_SND_HDA_CODEC_CA0132_DSP is not set CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y # end of HD-Audio CONFIG_SND_HDA_CORE=y CONFIG_SND_HDA_COMPONENT=y CONFIG_SND_HDA_EXT_CORE=y CONFIG_SND_HDA_PREALLOC_SIZE=64 # CONFIG_SND_SPI is not set CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y CONFIG_SND_USB_UA101=y # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_USB_US122L is not set CONFIG_SND_USB_6FIRE=y CONFIG_SND_USB_HIFACE=y CONFIG_SND_BCD2000=y CONFIG_SND_USB_LINE6=y CONFIG_SND_USB_POD=y # CONFIG_SND_USB_PODHD is not set CONFIG_SND_USB_TONEPORT=y # CONFIG_SND_USB_VARIAX is not set # CONFIG_SND_FIREWIRE is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y CONFIG_SND_SOC_COMPRESS=y CONFIG_SND_SOC_UTILS_KUNIT_TEST=y CONFIG_SND_SOC_ADI=y CONFIG_SND_SOC_ADI_AXI_I2S=y CONFIG_SND_SOC_ADI_AXI_SPDIF=y CONFIG_SND_SOC_AMD_ACP=y CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=y # CONFIG_SND_AMD_ACP_CONFIG is not set # CONFIG_SND_SOC_APPLE_MCA is not set # CONFIG_SND_ATMEL_SOC is not set # CONFIG_SND_BCM2835_SOC_I2S is not set # CONFIG_SND_SOC_CYGNUS is not set # CONFIG_SND_BCM63XX_I2S_WHISTLER is not set # CONFIG_SND_EP93XX_SOC is not set CONFIG_SND_DESIGNWARE_I2S=y # CONFIG_SND_DESIGNWARE_PCM is not set # # SoC Audio for Freescale CPUs # # # Common SoC Audio options for Freescale CPUs: # CONFIG_SND_SOC_FSL_ASRC=y CONFIG_SND_SOC_FSL_SAI=y CONFIG_SND_SOC_FSL_MQS=y CONFIG_SND_SOC_FSL_AUDMIX=y # CONFIG_SND_SOC_FSL_SSI is not set CONFIG_SND_SOC_FSL_SPDIF=y CONFIG_SND_SOC_FSL_ESAI=y CONFIG_SND_SOC_FSL_MICFIL=y # CONFIG_SND_SOC_FSL_EASRC is not set CONFIG_SND_SOC_FSL_XCVR=y # CONFIG_SND_SOC_FSL_AUD2HTX is not set CONFIG_SND_SOC_FSL_UTILS=y # CONFIG_SND_SOC_IMX_AUDMUX is not set # CONFIG_SND_IMX_SOC is not set # end of SoC Audio for Freescale CPUs CONFIG_SND_I2S_HI6210_I2S=y # CONFIG_SND_JZ4740_SOC_I2S is not set # CONFIG_SND_KIRKWOOD_SOC is not set CONFIG_SND_SOC_IMG=y CONFIG_SND_SOC_IMG_I2S_IN=y CONFIG_SND_SOC_IMG_I2S_OUT=y # CONFIG_SND_SOC_IMG_PARALLEL_OUT is not set CONFIG_SND_SOC_IMG_SPDIF_IN=y # CONFIG_SND_SOC_IMG_SPDIF_OUT is not set CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y # CONFIG_SND_SOC_INTEL_KEEMBAY is not set # CONFIG_SND_SOC_INTEL_AVS is not set CONFIG_SND_SOC_INTEL_MACH=y # CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set # CONFIG_SND_SOC_MT8186 is not set CONFIG_SND_SOC_MTK_BTCVSD=y # CONFIG_SND_SOC_MT8195 is not set # # ASoC support for Amlogic platforms # # CONFIG_SND_MESON_AIU is not set # CONFIG_SND_MESON_AXG_FRDDR is not set # CONFIG_SND_MESON_AXG_TODDR is not set # CONFIG_SND_MESON_AXG_TDMIN is not set # CONFIG_SND_MESON_AXG_TDMOUT is not set # CONFIG_SND_MESON_AXG_SOUND_CARD is not set # CONFIG_SND_MESON_AXG_SPDIFOUT is not set # CONFIG_SND_MESON_AXG_SPDIFIN is not set # CONFIG_SND_MESON_AXG_PDM is not set # CONFIG_SND_MESON_GX_SOUND_CARD is not set # CONFIG_SND_MESON_G12A_TOACODEC is not set # CONFIG_SND_MESON_G12A_TOHDMITX is not set # CONFIG_SND_SOC_MESON_T9015 is not set # end of ASoC support for Amlogic platforms # CONFIG_SND_MXS_SOC is not set # CONFIG_SND_PXA2XX_SOC is not set # CONFIG_SND_SOC_QCOM is not set # CONFIG_SND_SOC_ROCKCHIP is not set # CONFIG_SND_SOC_SAMSUNG is not set # # SoC Audio support for Renesas SoCs # # CONFIG_SND_SOC_SH4_FSI is not set # CONFIG_SND_SOC_RCAR is not set # CONFIG_SND_SOC_RZ is not set # end of SoC Audio support for Renesas SoCs # CONFIG_SND_SOC_SOF_TOPLEVEL is not set # CONFIG_SND_SOC_SPRD is not set # CONFIG_SND_SOC_STI is not set # # STMicroelectronics STM32 SOC audio support # # CONFIG_SND_SOC_STM32_SAI is not set # CONFIG_SND_SOC_STM32_I2S is not set # CONFIG_SND_SOC_STM32_SPDIFRX is not set # end of STMicroelectronics STM32 SOC audio support # # Allwinner SoC Audio support # # CONFIG_SND_SUN4I_CODEC is not set # CONFIG_SND_SUN8I_CODEC is not set # CONFIG_SND_SUN8I_CODEC_ANALOG is not set # CONFIG_SND_SUN50I_CODEC_ANALOG is not set # CONFIG_SND_SUN4I_I2S is not set # CONFIG_SND_SUN4I_SPDIF is not set # CONFIG_SND_SUN50I_DMIC is not set # end of Allwinner SoC Audio support # CONFIG_SND_SOC_TEGRA is not set # # Audio support for Texas Instruments SoCs # # # Texas Instruments DAI support for: # # CONFIG_SND_SOC_DAVINCI_ASP is not set # CONFIG_SND_SOC_DAVINCI_MCASP is not set # CONFIG_SND_SOC_DAVINCI_VCIF is not set # CONFIG_SND_SOC_OMAP_DMIC is not set # CONFIG_SND_SOC_OMAP_MCBSP is not set # CONFIG_SND_SOC_OMAP_MCPDM is not set # # Audio support for boards with Texas Instruments SoCs # # CONFIG_SND_SOC_OMAP3_TWL4030 is not set # CONFIG_SND_SOC_OMAP_ABE_TWL6040 is not set # CONFIG_SND_SOC_OMAP_HDMI is not set # CONFIG_SND_SOC_J721E_EVM is not set # end of Audio support for Texas Instruments SoCs # CONFIG_SND_SOC_UNIPHIER is not set CONFIG_SND_SOC_XILINX_I2S=y CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y # CONFIG_SND_SOC_XILINX_SPDIF is not set CONFIG_SND_SOC_XTFPGA_I2S=y CONFIG_SND_SOC_I2C_AND_SPI=y # # CODEC drivers # # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_WM_ADSP=y CONFIG_SND_SOC_AC97_CODEC=y CONFIG_SND_SOC_ADAU_UTILS=y CONFIG_SND_SOC_ADAU1372=y CONFIG_SND_SOC_ADAU1372_I2C=y CONFIG_SND_SOC_ADAU1372_SPI=y CONFIG_SND_SOC_ADAU1701=y CONFIG_SND_SOC_ADAU17X1=y CONFIG_SND_SOC_ADAU1761=y CONFIG_SND_SOC_ADAU1761_I2C=y CONFIG_SND_SOC_ADAU1761_SPI=y # CONFIG_SND_SOC_ADAU7002 is not set CONFIG_SND_SOC_ADAU7118=y CONFIG_SND_SOC_ADAU7118_HW=y CONFIG_SND_SOC_ADAU7118_I2C=y CONFIG_SND_SOC_AK4104=y CONFIG_SND_SOC_AK4118=y # CONFIG_SND_SOC_AK4375 is not set CONFIG_SND_SOC_AK4458=y CONFIG_SND_SOC_AK4554=y # CONFIG_SND_SOC_AK4613 is not set CONFIG_SND_SOC_AK4642=y CONFIG_SND_SOC_AK5386=y CONFIG_SND_SOC_AK5558=y # CONFIG_SND_SOC_ALC5623 is not set # CONFIG_SND_SOC_AW8738 is not set CONFIG_SND_SOC_BD28623=y CONFIG_SND_SOC_BT_SCO=y # CONFIG_SND_SOC_CPCAP is not set # CONFIG_SND_SOC_CS35L32 is not set CONFIG_SND_SOC_CS35L33=y # CONFIG_SND_SOC_CS35L34 is not set CONFIG_SND_SOC_CS35L35=y # CONFIG_SND_SOC_CS35L36 is not set CONFIG_SND_SOC_CS35L41_LIB=y CONFIG_SND_SOC_CS35L41=y CONFIG_SND_SOC_CS35L41_SPI=y CONFIG_SND_SOC_CS35L41_I2C=y CONFIG_SND_SOC_CS35L45_TABLES=y CONFIG_SND_SOC_CS35L45=y CONFIG_SND_SOC_CS35L45_SPI=y CONFIG_SND_SOC_CS35L45_I2C=y CONFIG_SND_SOC_CS42L42_CORE=y CONFIG_SND_SOC_CS42L42=y # CONFIG_SND_SOC_CS42L51_I2C is not set CONFIG_SND_SOC_CS42L73=y # CONFIG_SND_SOC_CS42L83 is not set CONFIG_SND_SOC_CS4234=y CONFIG_SND_SOC_CS4265=y CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4271=y # CONFIG_SND_SOC_CS4271_I2C is not set CONFIG_SND_SOC_CS4271_SPI=y # CONFIG_SND_SOC_CS42XX8_I2C is not set CONFIG_SND_SOC_CS43130=y # CONFIG_SND_SOC_CS4341 is not set CONFIG_SND_SOC_CS4349=y CONFIG_SND_SOC_CS53L30=y CONFIG_SND_SOC_CX2072X=y # CONFIG_SND_SOC_JZ4740_CODEC is not set # CONFIG_SND_SOC_JZ4725B_CODEC is not set # CONFIG_SND_SOC_JZ4760_CODEC is not set # CONFIG_SND_SOC_JZ4770_CODEC is not set CONFIG_SND_SOC_DA7213=y # CONFIG_SND_SOC_DMIC is not set CONFIG_SND_SOC_HDMI_CODEC=y CONFIG_SND_SOC_ES7134=y CONFIG_SND_SOC_ES7241=y CONFIG_SND_SOC_ES8316=y CONFIG_SND_SOC_ES8326=y # CONFIG_SND_SOC_ES8328_I2C is not set # CONFIG_SND_SOC_ES8328_SPI is not set # CONFIG_SND_SOC_GTM601 is not set CONFIG_SND_SOC_HDA=y CONFIG_SND_SOC_ICS43432=y # CONFIG_SND_SOC_INNO_RK3036 is not set CONFIG_SND_SOC_LOCHNAGAR_SC=y CONFIG_SND_SOC_MAX98088=y CONFIG_SND_SOC_MAX98357A=y CONFIG_SND_SOC_MAX98504=y CONFIG_SND_SOC_MAX9867=y CONFIG_SND_SOC_MAX98927=y CONFIG_SND_SOC_MAX98520=y CONFIG_SND_SOC_MAX98373=y CONFIG_SND_SOC_MAX98373_I2C=y CONFIG_SND_SOC_MAX98390=y CONFIG_SND_SOC_MAX98396=y # CONFIG_SND_SOC_MAX9860 is not set CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=y CONFIG_SND_SOC_PCM1681=y CONFIG_SND_SOC_PCM1789=y CONFIG_SND_SOC_PCM1789_I2C=y CONFIG_SND_SOC_PCM179X=y CONFIG_SND_SOC_PCM179X_I2C=y CONFIG_SND_SOC_PCM179X_SPI=y # CONFIG_SND_SOC_PCM186X_I2C is not set # CONFIG_SND_SOC_PCM186X_SPI is not set CONFIG_SND_SOC_PCM3060=y CONFIG_SND_SOC_PCM3060_I2C=y CONFIG_SND_SOC_PCM3060_SPI=y CONFIG_SND_SOC_PCM3168A=y CONFIG_SND_SOC_PCM3168A_I2C=y CONFIG_SND_SOC_PCM3168A_SPI=y # CONFIG_SND_SOC_PCM5102A is not set CONFIG_SND_SOC_PCM512x=y CONFIG_SND_SOC_PCM512x_I2C=y CONFIG_SND_SOC_PCM512x_SPI=y # CONFIG_SND_SOC_RK3328 is not set # CONFIG_SND_SOC_RK817 is not set CONFIG_SND_SOC_RL6231=y # CONFIG_SND_SOC_RT5616 is not set CONFIG_SND_SOC_RT5631=y # CONFIG_SND_SOC_RT5640 is not set CONFIG_SND_SOC_RT5645=y CONFIG_SND_SOC_RT5659=y # CONFIG_SND_SOC_RT9120 is not set CONFIG_SND_SOC_SGTL5000=y CONFIG_SND_SOC_SI476X=y CONFIG_SND_SOC_SIGMADSP=y CONFIG_SND_SOC_SIGMADSP_I2C=y CONFIG_SND_SOC_SIGMADSP_REGMAP=y # CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set # CONFIG_SND_SOC_SIMPLE_MUX is not set CONFIG_SND_SOC_SPDIF=y # CONFIG_SND_SOC_SRC4XXX_I2C is not set CONFIG_SND_SOC_SSM2305=y # CONFIG_SND_SOC_SSM2518 is not set # CONFIG_SND_SOC_SSM2602_SPI is not set # CONFIG_SND_SOC_SSM2602_I2C is not set # CONFIG_SND_SOC_SSM4567 is not set CONFIG_SND_SOC_STA32X=y CONFIG_SND_SOC_STA350=y # CONFIG_SND_SOC_STI_SAS is not set CONFIG_SND_SOC_TAS2552=y CONFIG_SND_SOC_TAS2562=y CONFIG_SND_SOC_TAS2764=y # CONFIG_SND_SOC_TAS2770 is not set CONFIG_SND_SOC_TAS2780=y # CONFIG_SND_SOC_TAS5086 is not set CONFIG_SND_SOC_TAS571X=y CONFIG_SND_SOC_TAS5720=y CONFIG_SND_SOC_TAS5805M=y CONFIG_SND_SOC_TAS6424=y CONFIG_SND_SOC_TDA7419=y CONFIG_SND_SOC_TFA9879=y CONFIG_SND_SOC_TFA989X=y CONFIG_SND_SOC_TLV320ADC3XXX=y CONFIG_SND_SOC_TLV320AIC23=y CONFIG_SND_SOC_TLV320AIC23_I2C=y CONFIG_SND_SOC_TLV320AIC23_SPI=y CONFIG_SND_SOC_TLV320AIC31XX=y # CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set # CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set CONFIG_SND_SOC_TLV320AIC3X=y # CONFIG_SND_SOC_TLV320AIC3X_I2C is not set CONFIG_SND_SOC_TLV320AIC3X_SPI=y CONFIG_SND_SOC_TLV320ADCX140=y # CONFIG_SND_SOC_TS3A227E is not set # CONFIG_SND_SOC_TSCS42XX is not set CONFIG_SND_SOC_TSCS454=y CONFIG_SND_SOC_UDA1334=y CONFIG_SND_SOC_WM8510=y # CONFIG_SND_SOC_WM8523 is not set # CONFIG_SND_SOC_WM8524 is not set CONFIG_SND_SOC_WM8580=y # CONFIG_SND_SOC_WM8711 is not set CONFIG_SND_SOC_WM8728=y # CONFIG_SND_SOC_WM8731_I2C is not set # CONFIG_SND_SOC_WM8731_SPI is not set CONFIG_SND_SOC_WM8737=y # CONFIG_SND_SOC_WM8741 is not set CONFIG_SND_SOC_WM8750=y CONFIG_SND_SOC_WM8753=y CONFIG_SND_SOC_WM8770=y CONFIG_SND_SOC_WM8776=y CONFIG_SND_SOC_WM8782=y CONFIG_SND_SOC_WM8804=y CONFIG_SND_SOC_WM8804_I2C=y CONFIG_SND_SOC_WM8804_SPI=y CONFIG_SND_SOC_WM8903=y # CONFIG_SND_SOC_WM8904 is not set CONFIG_SND_SOC_WM8940=y CONFIG_SND_SOC_WM8960=y CONFIG_SND_SOC_WM8974=y CONFIG_SND_SOC_WM8978=y CONFIG_SND_SOC_WM8985=y CONFIG_SND_SOC_ZL38060=y CONFIG_SND_SOC_MAX9759=y CONFIG_SND_SOC_MT6351=y CONFIG_SND_SOC_MT6358=y CONFIG_SND_SOC_MT6660=y CONFIG_SND_SOC_NAU8315=y CONFIG_SND_SOC_NAU8540=y # CONFIG_SND_SOC_NAU8810 is not set CONFIG_SND_SOC_NAU8821=y # CONFIG_SND_SOC_NAU8822 is not set CONFIG_SND_SOC_NAU8824=y CONFIG_SND_SOC_TPA6130A2=y CONFIG_SND_SOC_LPASS_MACRO_COMMON=y CONFIG_SND_SOC_LPASS_WSA_MACRO=y # CONFIG_SND_SOC_LPASS_VA_MACRO is not set CONFIG_SND_SOC_LPASS_RX_MACRO=y CONFIG_SND_SOC_LPASS_TX_MACRO=y # end of CODEC drivers CONFIG_SND_SIMPLE_CARD_UTILS=y # CONFIG_SND_SIMPLE_CARD is not set CONFIG_SND_AUDIO_GRAPH_CARD=y CONFIG_SND_AUDIO_GRAPH_CARD2=y # CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE is not set CONFIG_SND_TEST_COMPONENT=y # CONFIG_SND_VIRTIO is not set CONFIG_AC97_BUS=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_LED_TRIG=y CONFIG_USB_ULPI_BUS=y CONFIG_USB_CONN_GPIO=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_PCI=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y CONFIG_USB_FEW_INIT_RETRIES=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG_PRODUCTLIST is not set CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y CONFIG_USB_LEDS_TRIGGER_USBPORT=y CONFIG_USB_AUTOSUSPEND_DELAY=2 # CONFIG_USB_MON is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PCI=y CONFIG_USB_XHCI_PCI_RENESAS=y CONFIG_USB_XHCI_PLATFORM=y # CONFIG_USB_XHCI_HISTB is not set # CONFIG_USB_XHCI_MTK is not set # CONFIG_USB_XHCI_MVEBU is not set # CONFIG_USB_XHCI_RCAR is not set # CONFIG_USB_BRCMSTB is not set # CONFIG_USB_EHCI_HCD is not set CONFIG_USB_OXU210HP_HCD=y CONFIG_USB_ISP116X_HCD=y # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_FOTG210_HCD is not set CONFIG_USB_MAX3421_HCD=y # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y CONFIG_USB_SL811_HCD_ISO=y CONFIG_USB_R8A66597_HCD=y # CONFIG_USB_HCD_SSB is not set CONFIG_USB_HCD_TEST_MODE=y # CONFIG_USB_RENESAS_USBHS is not set # # USB Device Class drivers # CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set CONFIG_USB_TMC=y # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # # # USB Imaging devices # # CONFIG_USB_MDC800 is not set CONFIG_USBIP_CORE=y CONFIG_USBIP_VHCI_HCD=y CONFIG_USBIP_VHCI_HC_PORTS=8 CONFIG_USBIP_VHCI_NR_HCS=1 # CONFIG_USBIP_HOST is not set CONFIG_USBIP_VUDC=y # CONFIG_USBIP_DEBUG is not set CONFIG_USB_CDNS_SUPPORT=y CONFIG_USB_CDNS3=y # CONFIG_USB_CDNS3_GADGET is not set # CONFIG_USB_CDNS3_HOST is not set CONFIG_USB_CDNS3_TI=y CONFIG_USB_CDNS3_IMX=y # CONFIG_USB_MTU3 is not set # CONFIG_USB_MUSB_HDRC is not set CONFIG_USB_DWC3=y CONFIG_USB_DWC3_ULPI=y CONFIG_USB_DWC3_HOST=y # CONFIG_USB_DWC3_GADGET is not set # CONFIG_USB_DWC3_DUAL_ROLE is not set # # Platform Glue Driver Support # CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_EXYNOS=y # CONFIG_USB_DWC3_HAPS is not set CONFIG_USB_DWC3_KEYSTONE=y CONFIG_USB_DWC3_MESON_G12A=y CONFIG_USB_DWC3_OF_SIMPLE=y CONFIG_USB_DWC3_ST=y CONFIG_USB_DWC3_QCOM=y CONFIG_USB_DWC3_IMX8MP=y CONFIG_USB_DWC3_AM62=y CONFIG_USB_DWC2=y # CONFIG_USB_DWC2_HOST is not set # # Gadget/Dual-role mode requires USB Gadget support to be enabled # CONFIG_USB_DWC2_PERIPHERAL=y # CONFIG_USB_DWC2_DUAL_ROLE is not set # CONFIG_USB_DWC2_PCI is not set CONFIG_USB_DWC2_DEBUG=y CONFIG_USB_DWC2_VERBOSE=y # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set # CONFIG_USB_DWC2_DEBUG_PERIODIC is not set # CONFIG_USB_CHIPIDEA is not set # CONFIG_USB_ISP1760 is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Miscellaneous drivers # CONFIG_USB_EMI62=y CONFIG_USB_EMI26=y CONFIG_USB_ADUTUX=y # CONFIG_USB_SEVSEG is not set CONFIG_USB_LEGOTOWER=y CONFIG_USB_LCD=y CONFIG_USB_CYPRESS_CY7C63=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set CONFIG_USB_APPLEDISPLAY=y # CONFIG_USB_QCOM_EUD is not set CONFIG_APPLE_MFI_FASTCHARGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set CONFIG_USB_ISIGHTFW=y # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set CONFIG_USB_HUB_USB251XB=y # CONFIG_USB_HSIC_USB3503 is not set # CONFIG_USB_HSIC_USB4604 is not set # CONFIG_USB_LINK_LAYER_TEST is not set CONFIG_USB_CHAOSKEY=y # CONFIG_BRCM_USB_PINMAP is not set # CONFIG_USB_ONBOARD_HUB is not set CONFIG_USB_ATM=y CONFIG_USB_SPEEDTOUCH=y CONFIG_USB_CXACRU=y CONFIG_USB_UEAGLEATM=y CONFIG_USB_XUSBATM=y # # USB Physical Layer drivers # CONFIG_USB_PHY=y # CONFIG_KEYSTONE_USB_PHY is not set CONFIG_NOP_USB_XCEIV=y # CONFIG_AM335X_PHY_USB is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_TAHVO_USB is not set CONFIG_USB_ISP1301=y # CONFIG_USB_TEGRA_PHY is not set # CONFIG_USB_ULPI is not set # CONFIG_JZ4770_PHY is not set # end of USB Physical Layer drivers CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y # CONFIG_USB_GADGET_VERBOSE is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 # # USB Peripheral Controller # # CONFIG_USB_LPC32XX is not set # CONFIG_USB_FUSB300 is not set # CONFIG_USB_FOTG210_UDC is not set CONFIG_USB_GR_UDC=y CONFIG_USB_R8A66597=y # CONFIG_USB_RENESAS_USB3 is not set # CONFIG_USB_PXA27X is not set CONFIG_USB_MV_UDC=y CONFIG_USB_MV_U3D=y CONFIG_USB_SNP_CORE=y CONFIG_USB_SNP_UDC_PLAT=y CONFIG_USB_M66592=y CONFIG_USB_BDC_UDC=y CONFIG_USB_AMD5536UDC=y # CONFIG_USB_NET2272 is not set CONFIG_USB_NET2280=y # CONFIG_USB_GOKU is not set CONFIG_USB_EG20T=y # CONFIG_USB_GADGET_XILINX is not set CONFIG_USB_MAX3420_UDC=y # CONFIG_USB_ASPEED_UDC is not set # CONFIG_USB_ASPEED_VHUB is not set CONFIG_USB_DUMMY_HCD=y # end of USB Peripheral Controller CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_F_SS_LB=y CONFIG_USB_U_ETHER=y CONFIG_USB_F_ECM=y CONFIG_USB_F_SUBSET=y CONFIG_USB_F_RNDIS=y CONFIG_USB_F_FS=y CONFIG_USB_F_UAC1_LEGACY=y CONFIG_USB_F_UVC=y CONFIG_USB_F_HID=y CONFIG_USB_F_TCM=y # CONFIG_USB_CONFIGFS is not set # # USB Gadget precomposed configurations # CONFIG_USB_ZERO=y CONFIG_USB_AUDIO=y CONFIG_GADGET_UAC1=y CONFIG_GADGET_UAC1_LEGACY=y CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_ETH_EEM is not set # CONFIG_USB_G_NCM is not set # CONFIG_USB_GADGETFS is not set CONFIG_USB_FUNCTIONFS=y CONFIG_USB_FUNCTIONFS_ETH=y # CONFIG_USB_FUNCTIONFS_RNDIS is not set CONFIG_USB_FUNCTIONFS_GENERIC=y # CONFIG_USB_MASS_STORAGE is not set CONFIG_USB_GADGET_TARGET=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set CONFIG_USB_G_HID=y CONFIG_USB_G_WEBCAM=y CONFIG_USB_RAW_GADGET=y # end of USB Gadget precomposed configurations CONFIG_TYPEC=y # CONFIG_TYPEC_TCPM is not set # CONFIG_TYPEC_TPS6598X is not set # CONFIG_TYPEC_ANX7411 is not set CONFIG_TYPEC_RT1719=y CONFIG_TYPEC_HD3SS3220=y CONFIG_TYPEC_STUSB160X=y # CONFIG_TYPEC_QCOM_PMIC is not set CONFIG_TYPEC_WUSB3801=y # # USB Type-C Multiplexer/DeMultiplexer Switch support # # CONFIG_TYPEC_MUX_FSA4480 is not set # CONFIG_TYPEC_MUX_PI3USB30532 is not set # end of USB Type-C Multiplexer/DeMultiplexer Switch support # # USB Type-C Alternate Mode drivers # CONFIG_TYPEC_DP_ALTMODE=y CONFIG_TYPEC_NVIDIA_ALTMODE=y # end of USB Type-C Alternate Mode drivers CONFIG_USB_ROLE_SWITCH=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y CONFIG_LEDS_CLASS_MULTICOLOR=y # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set # # LED drivers # CONFIG_LEDS_AN30259A=y # CONFIG_LEDS_ARIEL is not set CONFIG_LEDS_AW2013=y # CONFIG_LEDS_BCM6328 is not set CONFIG_LEDS_BCM6358=y CONFIG_LEDS_CR0014114=y CONFIG_LEDS_EL15203000=y # CONFIG_LEDS_TURRIS_OMNIA is not set CONFIG_LEDS_LM3530=y CONFIG_LEDS_LM3532=y # CONFIG_LEDS_LM3642 is not set CONFIG_LEDS_LM3692X=y # CONFIG_LEDS_S3C24XX is not set # CONFIG_LEDS_COBALT_QUBE is not set # CONFIG_LEDS_COBALT_RAQ is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_LP3944=y # CONFIG_LEDS_LP3952 is not set CONFIG_LEDS_LP50XX=y # CONFIG_LEDS_LP55XX_COMMON is not set CONFIG_LEDS_LP8860=y # CONFIG_LEDS_PCA955X is not set CONFIG_LEDS_PCA963X=y # CONFIG_LEDS_WM831X_STATUS is not set CONFIG_LEDS_WM8350=y CONFIG_LEDS_DA9052=y CONFIG_LEDS_DAC124S085=y # CONFIG_LEDS_PWM is not set # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set CONFIG_LEDS_LT3593=y CONFIG_LEDS_ADP5520=y CONFIG_LEDS_MC13783=y CONFIG_LEDS_NS2=y CONFIG_LEDS_NETXBIG=y # CONFIG_LEDS_TCA6507 is not set CONFIG_LEDS_TLC591XX=y # CONFIG_LEDS_MAX77650 is not set CONFIG_LEDS_MAX8997=y CONFIG_LEDS_LM355x=y # CONFIG_LEDS_OT200 is not set CONFIG_LEDS_MENF21BMC=y # CONFIG_LEDS_IS31FL319X is not set CONFIG_LEDS_IS31FL32XX=y # # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) # CONFIG_LEDS_BLINKM=y # CONFIG_LEDS_SYSCON is not set CONFIG_LEDS_MLXREG=y # CONFIG_LEDS_USER is not set CONFIG_LEDS_SPI_BYTE=y CONFIG_LEDS_TI_LMU_COMMON=y # CONFIG_LEDS_LM3697 is not set # CONFIG_LEDS_TPS6105X is not set # CONFIG_LEDS_IP30 is not set # CONFIG_LEDS_BCM63138 is not set # CONFIG_LEDS_LGM is not set # # Flash and Torch LED drivers # # CONFIG_LEDS_AAT1290 is not set CONFIG_LEDS_AS3645A=y CONFIG_LEDS_KTD2692=y CONFIG_LEDS_LM3601X=y CONFIG_LEDS_MAX77693=y # CONFIG_LEDS_MT6360 is not set CONFIG_LEDS_RT4505=y # CONFIG_LEDS_RT8515 is not set # CONFIG_LEDS_SGM3140 is not set # # RGB LED drivers # CONFIG_LEDS_PWM_MULTICOLOR=y CONFIG_LEDS_QCOM_LPG=y # # LED Triggers # CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_ONESHOT is not set CONFIG_LEDS_TRIGGER_MTD=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_LEDS_TRIGGER_ACTIVITY=y # CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=y # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_LEDS_TRIGGER_NETDEV is not set CONFIG_LEDS_TRIGGER_PATTERN=y CONFIG_LEDS_TRIGGER_AUDIO=y # # Simple LED drivers # CONFIG_ACCESSIBILITY=y # # Speakup console speech # # end of Speakup console speech # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # # DMABUF options # CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_UDMABUF is not set CONFIG_DMABUF_MOVE_NOTIFY=y # CONFIG_DMABUF_DEBUG is not set CONFIG_DMABUF_SELFTESTS=y CONFIG_DMABUF_HEAPS=y # CONFIG_DMABUF_SYSFS_STATS is not set # CONFIG_DMABUF_HEAPS_SYSTEM is not set # end of DMABUF options # CONFIG_AUXDISPLAY is not set # CONFIG_PANEL is not set # CONFIG_UIO is not set # CONFIG_VFIO is not set # CONFIG_VIRT_DRIVERS is not set CONFIG_VIRTIO_ANCHOR=y CONFIG_VIRTIO=y # CONFIG_VIRTIO_MENU is not set CONFIG_VDPA=y CONFIG_VDPA_SIM=y CONFIG_VDPA_SIM_NET=y CONFIG_VDPA_SIM_BLOCK=y CONFIG_VDPA_USER=y CONFIG_IFCVF=y # CONFIG_VP_VDPA is not set CONFIG_VHOST_IOTLB=y CONFIG_VHOST_RING=y # CONFIG_VHOST_MENU is not set # # Microsoft Hyper-V guest support # # end of Microsoft Hyper-V guest support CONFIG_GREYBUS=y CONFIG_GREYBUS_ES2=y CONFIG_COMEDI=y CONFIG_COMEDI_DEBUG=y CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048 CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480 CONFIG_COMEDI_MISC_DRIVERS=y CONFIG_COMEDI_BOND=y # CONFIG_COMEDI_TEST is not set CONFIG_COMEDI_PARPORT=y # CONFIG_COMEDI_SSV_DNP is not set CONFIG_COMEDI_ISA_DRIVERS=y CONFIG_COMEDI_PCL711=y CONFIG_COMEDI_PCL724=y # CONFIG_COMEDI_PCL726 is not set CONFIG_COMEDI_PCL730=y CONFIG_COMEDI_PCL812=y CONFIG_COMEDI_PCL816=y # CONFIG_COMEDI_PCL818 is not set CONFIG_COMEDI_PCM3724=y CONFIG_COMEDI_AMPLC_DIO200_ISA=y CONFIG_COMEDI_AMPLC_PC236_ISA=y CONFIG_COMEDI_AMPLC_PC263_ISA=y CONFIG_COMEDI_RTI800=y CONFIG_COMEDI_RTI802=y CONFIG_COMEDI_DAC02=y CONFIG_COMEDI_DAS16M1=y CONFIG_COMEDI_DAS08_ISA=y # CONFIG_COMEDI_DAS16 is not set CONFIG_COMEDI_DAS800=y CONFIG_COMEDI_DAS1800=y CONFIG_COMEDI_DAS6402=y CONFIG_COMEDI_DT2801=y CONFIG_COMEDI_DT2811=y CONFIG_COMEDI_DT2814=y CONFIG_COMEDI_DT2815=y # CONFIG_COMEDI_DT2817 is not set CONFIG_COMEDI_DT282X=y # CONFIG_COMEDI_DMM32AT is not set # CONFIG_COMEDI_FL512 is not set CONFIG_COMEDI_AIO_AIO12_8=y CONFIG_COMEDI_AIO_IIRO_16=y CONFIG_COMEDI_II_PCI20KC=y CONFIG_COMEDI_C6XDIGIO=y CONFIG_COMEDI_MPC624=y CONFIG_COMEDI_ADQ12B=y CONFIG_COMEDI_NI_AT_A2150=y CONFIG_COMEDI_NI_AT_AO=y # CONFIG_COMEDI_NI_ATMIO is not set CONFIG_COMEDI_NI_ATMIO16D=y CONFIG_COMEDI_NI_LABPC_ISA=y CONFIG_COMEDI_PCMAD=y # CONFIG_COMEDI_PCMDA12 is not set # CONFIG_COMEDI_PCMMIO is not set CONFIG_COMEDI_PCMUIO=y CONFIG_COMEDI_MULTIQ3=y # CONFIG_COMEDI_S526 is not set CONFIG_COMEDI_PCI_DRIVERS=y # CONFIG_COMEDI_8255_PCI is not set CONFIG_COMEDI_ADDI_WATCHDOG=y CONFIG_COMEDI_ADDI_APCI_1032=y # CONFIG_COMEDI_ADDI_APCI_1500 is not set CONFIG_COMEDI_ADDI_APCI_1516=y # CONFIG_COMEDI_ADDI_APCI_1564 is not set CONFIG_COMEDI_ADDI_APCI_16XX=y CONFIG_COMEDI_ADDI_APCI_2032=y CONFIG_COMEDI_ADDI_APCI_2200=y CONFIG_COMEDI_ADDI_APCI_3120=y # CONFIG_COMEDI_ADDI_APCI_3501 is not set CONFIG_COMEDI_ADDI_APCI_3XXX=y # CONFIG_COMEDI_ADL_PCI6208 is not set CONFIG_COMEDI_ADL_PCI7X3X=y # CONFIG_COMEDI_ADL_PCI8164 is not set CONFIG_COMEDI_ADL_PCI9111=y CONFIG_COMEDI_ADL_PCI9118=y CONFIG_COMEDI_ADV_PCI1710=y CONFIG_COMEDI_ADV_PCI1720=y CONFIG_COMEDI_ADV_PCI1723=y CONFIG_COMEDI_ADV_PCI1724=y # CONFIG_COMEDI_ADV_PCI1760 is not set CONFIG_COMEDI_ADV_PCI_DIO=y CONFIG_COMEDI_AMPLC_DIO200_PCI=y # CONFIG_COMEDI_AMPLC_PC236_PCI is not set # CONFIG_COMEDI_AMPLC_PC263_PCI is not set # CONFIG_COMEDI_AMPLC_PCI224 is not set CONFIG_COMEDI_AMPLC_PCI230=y CONFIG_COMEDI_CONTEC_PCI_DIO=y # CONFIG_COMEDI_DAS08_PCI is not set CONFIG_COMEDI_DT3000=y CONFIG_COMEDI_DYNA_PCI10XX=y # CONFIG_COMEDI_GSC_HPDI is not set # CONFIG_COMEDI_MF6X4 is not set # CONFIG_COMEDI_ICP_MULTI is not set CONFIG_COMEDI_DAQBOARD2000=y # CONFIG_COMEDI_JR3_PCI is not set # CONFIG_COMEDI_KE_COUNTER is not set # CONFIG_COMEDI_CB_PCIDAS64 is not set # CONFIG_COMEDI_CB_PCIDAS is not set CONFIG_COMEDI_CB_PCIDDA=y CONFIG_COMEDI_CB_PCIMDAS=y # CONFIG_COMEDI_CB_PCIMDDA is not set CONFIG_COMEDI_ME4000=y CONFIG_COMEDI_ME_DAQ=y # CONFIG_COMEDI_NI_6527 is not set CONFIG_COMEDI_NI_65XX=y # CONFIG_COMEDI_NI_660X is not set # CONFIG_COMEDI_NI_670X is not set # CONFIG_COMEDI_NI_LABPC_PCI is not set CONFIG_COMEDI_NI_PCIDIO=y # CONFIG_COMEDI_NI_PCIMIO is not set # CONFIG_COMEDI_RTD520 is not set CONFIG_COMEDI_S626=y CONFIG_COMEDI_MITE=y # CONFIG_COMEDI_USB_DRIVERS is not set CONFIG_COMEDI_8254=y CONFIG_COMEDI_8255=y CONFIG_COMEDI_8255_SA=y CONFIG_COMEDI_KCOMEDILIB=y CONFIG_COMEDI_AMPLC_DIO200=y CONFIG_COMEDI_AMPLC_PC236=y CONFIG_COMEDI_DAS08=y CONFIG_COMEDI_NI_LABPC=y CONFIG_COMEDI_NI_ROUTING=y CONFIG_COMEDI_TESTS=y # CONFIG_COMEDI_TESTS_EXAMPLE is not set CONFIG_COMEDI_TESTS_NI_ROUTES=y # CONFIG_STAGING is not set # CONFIG_GOLDFISH is not set # CONFIG_CHROME_PLATFORMS is not set # CONFIG_MELLANOX_PLATFORM is not set # CONFIG_OLPC_XO175 is not set CONFIG_SURFACE_PLATFORMS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # CONFIG_COMMON_CLK_WM831X is not set # # Clock driver for ARM Reference designs # # CONFIG_CLK_ICST is not set # CONFIG_CLK_SP810 is not set # end of Clock driver for ARM Reference designs # CONFIG_CLK_HSDK is not set CONFIG_LMK04832=y # CONFIG_COMMON_CLK_APPLE_NCO is not set # CONFIG_COMMON_CLK_MAX77686 is not set CONFIG_COMMON_CLK_MAX9485=y # CONFIG_COMMON_CLK_HI655X is not set # CONFIG_COMMON_CLK_SCMI is not set # CONFIG_COMMON_CLK_SCPI is not set CONFIG_COMMON_CLK_SI5341=y CONFIG_COMMON_CLK_SI5351=y CONFIG_COMMON_CLK_SI514=y CONFIG_COMMON_CLK_SI544=y CONFIG_COMMON_CLK_SI570=y # CONFIG_COMMON_CLK_BM1880 is not set # CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_TPS68470 is not set # CONFIG_COMMON_CLK_CDCE925 is not set # CONFIG_COMMON_CLK_CS2000_CP is not set # CONFIG_COMMON_CLK_EN7523 is not set # CONFIG_COMMON_CLK_FSL_FLEXSPI is not set # CONFIG_COMMON_CLK_FSL_SAI is not set # CONFIG_COMMON_CLK_GEMINI is not set # CONFIG_COMMON_CLK_LAN966X is not set # CONFIG_COMMON_CLK_ASPEED is not set CONFIG_COMMON_CLK_S2MPS11=y CONFIG_CLK_TWL6040=y # CONFIG_COMMON_CLK_AXI_CLKGEN is not set # CONFIG_CLK_QORIQ is not set # CONFIG_CLK_LS1028A_PLLDIG is not set # CONFIG_COMMON_CLK_XGENE is not set CONFIG_COMMON_CLK_LOCHNAGAR=y CONFIG_COMMON_CLK_PALMAS=y CONFIG_COMMON_CLK_PWM=y # CONFIG_COMMON_CLK_OXNAS is not set # CONFIG_COMMON_CLK_RS9_PCIE is not set CONFIG_COMMON_CLK_VC5=y CONFIG_COMMON_CLK_VC7=y # CONFIG_COMMON_CLK_MMP2_AUDIO is not set # CONFIG_COMMON_CLK_BD718XX is not set CONFIG_COMMON_CLK_FIXED_MMIO=y # CONFIG_CLK_ACTIONS is not set # CONFIG_CLK_BAIKAL_T1 is not set # CONFIG_CLK_BCM2711_DVP is not set # CONFIG_CLK_BCM2835 is not set # CONFIG_CLK_BCM_63XX is not set # CONFIG_CLK_BCM_63XX_GATE is not set # CONFIG_CLK_BCM_KONA is not set # CONFIG_CLK_BCM_CYGNUS is not set # CONFIG_CLK_BCM_HR2 is not set # CONFIG_CLK_BCM_NSP is not set # CONFIG_CLK_BCM_NS2 is not set # CONFIG_CLK_BCM_SR is not set # CONFIG_CLK_RASPBERRYPI is not set # CONFIG_COMMON_CLK_HI3516CV300 is not set # CONFIG_COMMON_CLK_HI3519 is not set # CONFIG_COMMON_CLK_HI3559A is not set # CONFIG_COMMON_CLK_HI3660 is not set # CONFIG_COMMON_CLK_HI3670 is not set # CONFIG_COMMON_CLK_HI3798CV200 is not set # CONFIG_COMMON_CLK_HI6220 is not set # CONFIG_RESET_HISI is not set # CONFIG_COMMON_CLK_BOSTON is not set # CONFIG_MXC_CLK is not set # CONFIG_CLK_IMX8MM is not set # CONFIG_CLK_IMX8MN is not set # CONFIG_CLK_IMX8MP is not set # CONFIG_CLK_IMX8MQ is not set # CONFIG_CLK_IMX8ULP is not set # CONFIG_CLK_IMX93 is not set # # Ingenic SoCs drivers # # CONFIG_INGENIC_CGU_JZ4740 is not set # CONFIG_INGENIC_CGU_JZ4725B is not set # CONFIG_INGENIC_CGU_JZ4760 is not set # CONFIG_INGENIC_CGU_JZ4770 is not set # CONFIG_INGENIC_CGU_JZ4780 is not set # CONFIG_INGENIC_CGU_X1000 is not set # CONFIG_INGENIC_CGU_X1830 is not set # CONFIG_INGENIC_TCU_CLK is not set # end of Ingenic SoCs drivers # CONFIG_COMMON_CLK_KEYSTONE is not set # CONFIG_TI_SYSCON_CLK is not set # # Clock driver for MediaTek SoC # # CONFIG_COMMON_CLK_MT2701 is not set # CONFIG_COMMON_CLK_MT2712 is not set # CONFIG_COMMON_CLK_MT6765 is not set # CONFIG_COMMON_CLK_MT6779 is not set # CONFIG_COMMON_CLK_MT6795 is not set # CONFIG_COMMON_CLK_MT6797 is not set # CONFIG_COMMON_CLK_MT7622 is not set # CONFIG_COMMON_CLK_MT7629 is not set # CONFIG_COMMON_CLK_MT7986 is not set # CONFIG_COMMON_CLK_MT8135 is not set # CONFIG_COMMON_CLK_MT8167 is not set # CONFIG_COMMON_CLK_MT8173 is not set # CONFIG_COMMON_CLK_MT8183 is not set # CONFIG_COMMON_CLK_MT8186 is not set # CONFIG_COMMON_CLK_MT8192 is not set # CONFIG_COMMON_CLK_MT8195 is not set # CONFIG_COMMON_CLK_MT8365 is not set # CONFIG_COMMON_CLK_MT8516 is not set # end of Clock driver for MediaTek SoC # # Clock support for Amlogic platforms # # end of Clock support for Amlogic platforms # CONFIG_MSTAR_MSC313_MPLL is not set # CONFIG_MCHP_CLK_MPFS is not set # CONFIG_COMMON_CLK_PISTACHIO is not set # CONFIG_COMMON_CLK_QCOM is not set # CONFIG_CLK_MT7621 is not set # CONFIG_CLK_RENESAS is not set # CONFIG_COMMON_CLK_SAMSUNG is not set # CONFIG_S3C2410_COMMON_CLK is not set # CONFIG_S3C2412_COMMON_CLK is not set # CONFIG_S3C2443_COMMON_CLK is not set # CONFIG_CLK_SIFIVE is not set # CONFIG_CLK_INTEL_SOCFPGA is not set # CONFIG_SPRD_COMMON_CLK is not set # CONFIG_CLK_STARFIVE_JH7100 is not set CONFIG_CLK_SUNXI=y CONFIG_CLK_SUNXI_CLOCKS=y CONFIG_CLK_SUNXI_PRCM_SUN6I=y CONFIG_CLK_SUNXI_PRCM_SUN8I=y CONFIG_CLK_SUNXI_PRCM_SUN9I=y # CONFIG_SUNXI_CCU is not set # CONFIG_COMMON_CLK_TI_ADPLL is not set # CONFIG_CLK_UNIPHIER is not set # CONFIG_COMMON_CLK_VISCONTI is not set # CONFIG_CLK_LGM_CGU is not set CONFIG_XILINX_VCU=y CONFIG_COMMON_CLK_XLNX_CLKWZRD=y # CONFIG_COMMON_CLK_ZYNQMP is not set CONFIG_CLK_KUNIT_TEST=y CONFIG_CLK_GATE_KUNIT_TEST=y # CONFIG_HWSPINLOCK is not set # # Clock Source drivers # CONFIG_TIMER_OF=y CONFIG_TIMER_PROBE=y # CONFIG_BCM2835_TIMER is not set # CONFIG_BCM_KONA_TIMER is not set # CONFIG_DAVINCI_TIMER is not set # CONFIG_DIGICOLOR_TIMER is not set # CONFIG_OMAP_DM_TIMER is not set # CONFIG_DW_APB_TIMER is not set # CONFIG_FTTMR010_TIMER is not set # CONFIG_IXP4XX_TIMER is not set # CONFIG_MESON6_TIMER is not set # CONFIG_OWL_TIMER is not set # CONFIG_RDA_TIMER is not set # CONFIG_SUN4I_TIMER is not set # CONFIG_SUN5I_HSTIMER is not set # CONFIG_TEGRA_TIMER is not set # CONFIG_TEGRA186_TIMER is not set # CONFIG_VT8500_TIMER is not set # CONFIG_NPCM7XX_TIMER is not set # CONFIG_CADENCE_TTC_TIMER is not set # CONFIG_ASM9260_TIMER is not set # CONFIG_CLKSRC_DBX500_PRCMU is not set # CONFIG_CLPS711X_TIMER is not set # CONFIG_MXS_TIMER is not set # CONFIG_NSPIRE_TIMER is not set # CONFIG_INTEGRATOR_AP_TIMER is not set # CONFIG_CLKSRC_PISTACHIO is not set # CONFIG_CLKSRC_STM32_LP is not set # CONFIG_ARMV7M_SYSTICK is not set # CONFIG_ATMEL_PIT is not set # CONFIG_ATMEL_ST is not set # CONFIG_CLKSRC_SAMSUNG_PWM is not set # CONFIG_FSL_FTM_TIMER is not set # CONFIG_OXNAS_RPS_TIMER is not set # CONFIG_MTK_TIMER is not set # CONFIG_SPRD_TIMER is not set # CONFIG_CLKSRC_JCORE_PIT is not set # CONFIG_SH_TIMER_CMT is not set # CONFIG_SH_TIMER_MTU2 is not set # CONFIG_RENESAS_OSTM is not set # CONFIG_SH_TIMER_TMU is not set # CONFIG_EM_TIMER_STI is not set # CONFIG_CLKSRC_PXA is not set # CONFIG_TIMER_IMX_SYS_CTR is not set # CONFIG_CLKSRC_ST_LPC is not set # CONFIG_GXP_TIMER is not set # CONFIG_MSC313E_TIMER is not set # CONFIG_INGENIC_TIMER is not set # CONFIG_INGENIC_SYSOST is not set # CONFIG_INGENIC_OST is not set CONFIG_MICROCHIP_PIT64B=y # end of Clock Source drivers # CONFIG_MAILBOX is not set CONFIG_IOMMU_IOVA=y CONFIG_IOMMU_API=y # CONFIG_IOMMU_SUPPORT is not set # # Remoteproc drivers # CONFIG_REMOTEPROC=y # CONFIG_REMOTEPROC_CDEV is not set # CONFIG_INGENIC_VPU_RPROC is not set # CONFIG_MTK_SCP is not set # CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set # CONFIG_RCAR_REMOTEPROC is not set # end of Remoteproc drivers # # Rpmsg drivers # # CONFIG_RPMSG_VIRTIO is not set # end of Rpmsg drivers # CONFIG_SOUNDWIRE is not set # # SOC (System On Chip) specific Drivers # # # Amlogic SoC drivers # # CONFIG_MESON_CANVAS is not set # CONFIG_MESON_CLK_MEASURE is not set # CONFIG_MESON_GX_SOCINFO is not set # CONFIG_MESON_MX_SOCINFO is not set # end of Amlogic SoC drivers # # Apple SoC drivers # # CONFIG_APPLE_SART is not set # end of Apple SoC drivers # # ASPEED SoC drivers # # CONFIG_ASPEED_LPC_CTRL is not set # CONFIG_ASPEED_LPC_SNOOP is not set # CONFIG_ASPEED_UART_ROUTING is not set # CONFIG_ASPEED_P2A_CTRL is not set # CONFIG_ASPEED_SOCINFO is not set # end of ASPEED SoC drivers # CONFIG_AT91_SOC_ID is not set # CONFIG_AT91_SOC_SFR is not set # # Broadcom SoC drivers # # CONFIG_BCM2835_POWER is not set # CONFIG_SOC_BCM63XX is not set # CONFIG_SOC_BRCMSTB is not set # CONFIG_BCM_PMB is not set # end of Broadcom SoC drivers # # NXP/Freescale QorIQ SoC drivers # # CONFIG_QUICC_ENGINE is not set CONFIG_DPAA2_CONSOLE=y # end of NXP/Freescale QorIQ SoC drivers # # fujitsu SoC drivers # # end of fujitsu SoC drivers # # i.MX SoC drivers # # CONFIG_SOC_IMX8M is not set # CONFIG_SOC_IMX9 is not set # end of i.MX SoC drivers # # IXP4xx SoC drivers # # CONFIG_IXP4XX_QMGR is not set # CONFIG_IXP4XX_NPE is not set # end of IXP4xx SoC drivers # # Enable LiteX SoC Builder specific drivers # CONFIG_LITEX=y CONFIG_LITEX_SOC_CONTROLLER=y # end of Enable LiteX SoC Builder specific drivers # # MediaTek SoC drivers # # CONFIG_MTK_CMDQ is not set # CONFIG_MTK_DEVAPC is not set # CONFIG_MTK_INFRACFG is not set # CONFIG_MTK_PMIC_WRAP is not set # CONFIG_MTK_SCPSYS is not set # CONFIG_MTK_MMSYS is not set # end of MediaTek SoC drivers # # Qualcomm SoC drivers # # CONFIG_QCOM_COMMAND_DB is not set # CONFIG_QCOM_GENI_SE is not set # CONFIG_QCOM_GSBI is not set # CONFIG_QCOM_LLCC is not set # CONFIG_QCOM_RPMH is not set # CONFIG_QCOM_SPM is not set # CONFIG_QCOM_ICC_BWMON is not set # end of Qualcomm SoC drivers # CONFIG_SOC_RENESAS is not set # CONFIG_ROCKCHIP_GRF is not set # CONFIG_ROCKCHIP_IODOMAIN is not set # CONFIG_SOC_SAMSUNG is not set # CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set # CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set # CONFIG_SOC_TI is not set # CONFIG_UX500_SOC_ID is not set # # Xilinx SoC drivers # # end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set # CONFIG_DEVFREQ_GOV_POWERSAVE is not set # CONFIG_DEVFREQ_GOV_USERSPACE is not set # CONFIG_DEVFREQ_GOV_PASSIVE is not set # # DEVFREQ Drivers # # CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set # CONFIG_ARM_IMX_BUS_DEVFREQ is not set # CONFIG_ARM_TEGRA_DEVFREQ is not set # CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set # CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set # CONFIG_PM_DEVFREQ_EVENT is not set CONFIG_EXTCON=y # # Extcon Device Drivers # # CONFIG_EXTCON_ADC_JACK is not set # CONFIG_EXTCON_GPIO is not set # CONFIG_EXTCON_MAX14577 is not set CONFIG_EXTCON_MAX3355=y CONFIG_EXTCON_MAX8997=y # CONFIG_EXTCON_PALMAS is not set # CONFIG_EXTCON_PTN5150 is not set # CONFIG_EXTCON_QCOM_SPMI_MISC is not set # CONFIG_EXTCON_RT8973A is not set CONFIG_EXTCON_SM5502=y CONFIG_EXTCON_USB_GPIO=y # CONFIG_EXTCON_USBC_TUSB320 is not set CONFIG_MEMORY=y CONFIG_DDR=y # CONFIG_ATMEL_SDRAMC is not set # CONFIG_ATMEL_EBI is not set # CONFIG_BRCMSTB_DPFE is not set # CONFIG_BRCMSTB_MEMC is not set # CONFIG_BT1_L2_CTL is not set # CONFIG_TI_AEMIF is not set # CONFIG_TI_EMIF is not set # CONFIG_OMAP_GPMC is not set CONFIG_FPGA_DFL_EMIF=y # CONFIG_MVEBU_DEVBUS is not set # CONFIG_FSL_CORENET_CF is not set # CONFIG_FSL_IFC is not set # CONFIG_JZ4780_NEMC is not set # CONFIG_MTK_SMI is not set # CONFIG_DA8XX_DDRCTL is not set # CONFIG_RENESAS_RPCIF is not set # CONFIG_STM32_FMC2_EBI is not set # CONFIG_SAMSUNG_MC is not set CONFIG_TEGRA_MC=y CONFIG_TEGRA20_EMC=y CONFIG_TEGRA30_EMC=y CONFIG_TEGRA124_EMC=y # CONFIG_TEGRA210_EMC is not set CONFIG_IIO=y CONFIG_IIO_BUFFER=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_BUFFER_DMA=y CONFIG_IIO_BUFFER_DMAENGINE=y # CONFIG_IIO_BUFFER_HW_CONSUMER is not set CONFIG_IIO_KFIFO_BUF=y CONFIG_IIO_TRIGGERED_BUFFER=y CONFIG_IIO_CONFIGFS=y CONFIG_IIO_TRIGGER=y CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # CONFIG_IIO_SW_DEVICE is not set # CONFIG_IIO_SW_TRIGGER is not set CONFIG_IIO_TRIGGERED_EVENT=y # # Accelerometers # CONFIG_ADIS16201=y CONFIG_ADIS16209=y # CONFIG_ADXL313_I2C is not set # CONFIG_ADXL313_SPI is not set CONFIG_ADXL345=y CONFIG_ADXL345_I2C=y CONFIG_ADXL345_SPI=y # CONFIG_ADXL355_I2C is not set # CONFIG_ADXL355_SPI is not set CONFIG_ADXL367=y CONFIG_ADXL367_SPI=y CONFIG_ADXL367_I2C=y # CONFIG_ADXL372_SPI is not set # CONFIG_ADXL372_I2C is not set # CONFIG_BMA180 is not set CONFIG_BMA220=y # CONFIG_BMA400 is not set CONFIG_BMC150_ACCEL=y CONFIG_BMC150_ACCEL_I2C=y CONFIG_BMC150_ACCEL_SPI=y # CONFIG_BMI088_ACCEL is not set # CONFIG_DA280 is not set # CONFIG_DA311 is not set # CONFIG_DMARD06 is not set CONFIG_DMARD09=y # CONFIG_DMARD10 is not set # CONFIG_FXLS8962AF_I2C is not set # CONFIG_FXLS8962AF_SPI is not set CONFIG_IIO_ST_ACCEL_3AXIS=y CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y CONFIG_KXSD9=y CONFIG_KXSD9_SPI=y CONFIG_KXSD9_I2C=y # CONFIG_KXCJK1013 is not set # CONFIG_MC3230 is not set CONFIG_MMA7455=y # CONFIG_MMA7455_I2C is not set CONFIG_MMA7455_SPI=y CONFIG_MMA7660=y CONFIG_MMA8452=y # CONFIG_MMA9551 is not set # CONFIG_MMA9553 is not set CONFIG_MSA311=y CONFIG_MXC4005=y # CONFIG_MXC6255 is not set # CONFIG_SCA3000 is not set CONFIG_SCA3300=y CONFIG_STK8312=y # CONFIG_STK8BA50 is not set # end of Accelerometers # # Analog to digital converters # CONFIG_AD_SIGMA_DELTA=y CONFIG_AD7091R5=y CONFIG_AD7124=y CONFIG_AD7192=y CONFIG_AD7266=y CONFIG_AD7280=y CONFIG_AD7291=y CONFIG_AD7292=y CONFIG_AD7298=y # CONFIG_AD7476 is not set CONFIG_AD7606=y CONFIG_AD7606_IFACE_PARALLEL=y CONFIG_AD7606_IFACE_SPI=y # CONFIG_AD7766 is not set CONFIG_AD7768_1=y CONFIG_AD7780=y # CONFIG_AD7791 is not set CONFIG_AD7793=y CONFIG_AD7887=y CONFIG_AD7923=y # CONFIG_AD7949 is not set # CONFIG_AD799X is not set # CONFIG_ADI_AXI_ADC is not set # CONFIG_ASPEED_ADC is not set # CONFIG_AT91_SAMA5D2_ADC is not set # CONFIG_AXP20X_ADC is not set # CONFIG_AXP288_ADC is not set # CONFIG_BCM_IPROC_ADC is not set # CONFIG_BERLIN2_ADC is not set # CONFIG_CC10001_ADC is not set CONFIG_DA9150_GPADC=y # CONFIG_DLN2_ADC is not set CONFIG_ENVELOPE_DETECTOR=y # CONFIG_EXYNOS_ADC is not set CONFIG_HI8435=y # CONFIG_HX711 is not set CONFIG_INA2XX_ADC=y # CONFIG_INGENIC_ADC is not set # CONFIG_IMX7D_ADC is not set # CONFIG_IMX8QXP_ADC is not set # CONFIG_LPC18XX_ADC is not set # CONFIG_LPC32XX_ADC is not set # CONFIG_LTC2471 is not set CONFIG_LTC2485=y CONFIG_LTC2496=y CONFIG_LTC2497=y # CONFIG_MAX1027 is not set CONFIG_MAX11100=y # CONFIG_MAX1118 is not set CONFIG_MAX11205=y # CONFIG_MAX1241 is not set CONFIG_MAX1363=y # CONFIG_MAX9611 is not set CONFIG_MCP320X=y # CONFIG_MCP3422 is not set CONFIG_MCP3911=y CONFIG_MEDIATEK_MT6360_ADC=y # CONFIG_MEDIATEK_MT6577_AUXADC is not set CONFIG_MEN_Z188_ADC=y # CONFIG_MESON_SARADC is not set CONFIG_NAU7802=y # CONFIG_NPCM_ADC is not set # CONFIG_PALMAS_GPADC is not set CONFIG_QCOM_VADC_COMMON=y CONFIG_QCOM_SPMI_IADC=y CONFIG_QCOM_SPMI_VADC=y # CONFIG_QCOM_SPMI_ADC5 is not set # CONFIG_RCAR_GYRO_ADC is not set # CONFIG_ROCKCHIP_SARADC is not set # CONFIG_RICHTEK_RTQ6056 is not set # CONFIG_RZG2L_ADC is not set # CONFIG_SC27XX_ADC is not set # CONFIG_SPEAR_ADC is not set # CONFIG_SD_ADC_MODULATOR is not set # CONFIG_STM32_ADC_CORE is not set # CONFIG_STM32_DFSDM_CORE is not set # CONFIG_STM32_DFSDM_ADC is not set CONFIG_TI_ADC081C=y # CONFIG_TI_ADC0832 is not set # CONFIG_TI_ADC084S021 is not set CONFIG_TI_ADC12138=y CONFIG_TI_ADC108S102=y # CONFIG_TI_ADC128S052 is not set CONFIG_TI_ADC161S626=y CONFIG_TI_ADS1015=y CONFIG_TI_ADS7950=y CONFIG_TI_ADS8344=y CONFIG_TI_ADS8688=y CONFIG_TI_ADS124S08=y CONFIG_TI_ADS131E08=y # CONFIG_TI_TLC4541 is not set CONFIG_TI_TSC2046=y CONFIG_TWL4030_MADC=y CONFIG_TWL6030_GPADC=y CONFIG_VF610_ADC=y CONFIG_VIPERBOARD_ADC=y CONFIG_XILINX_XADC=y # CONFIG_XILINX_AMS is not set # end of Analog to digital converters # # Analog to digital and digital to analog converters # CONFIG_AD74413R=y # end of Analog to digital and digital to analog converters # # Analog Front Ends # CONFIG_IIO_RESCALE=y # end of Analog Front Ends # # Amplifiers # CONFIG_AD8366=y CONFIG_ADA4250=y # CONFIG_HMC425 is not set # end of Amplifiers # # Capacitance to digital converters # CONFIG_AD7150=y # CONFIG_AD7746 is not set # end of Capacitance to digital converters # # Chemical Sensors # CONFIG_ATLAS_PH_SENSOR=y # CONFIG_ATLAS_EZO_SENSOR is not set CONFIG_BME680=y CONFIG_BME680_I2C=y CONFIG_BME680_SPI=y CONFIG_CCS811=y CONFIG_IAQCORE=y CONFIG_PMS7003=y CONFIG_SCD30_CORE=y CONFIG_SCD30_I2C=y CONFIG_SCD30_SERIAL=y # CONFIG_SCD4X is not set CONFIG_SENSIRION_SGP30=y # CONFIG_SENSIRION_SGP40 is not set CONFIG_SPS30=y CONFIG_SPS30_I2C=y CONFIG_SPS30_SERIAL=y CONFIG_SENSEAIR_SUNRISE_CO2=y CONFIG_VZ89X=y # end of Chemical Sensors # # Hid Sensor IIO Common # # end of Hid Sensor IIO Common CONFIG_IIO_MS_SENSORS_I2C=y # # IIO SCMI Sensors # # end of IIO SCMI Sensors # # SSP Sensor Common # # CONFIG_IIO_SSP_SENSORHUB is not set # end of SSP Sensor Common CONFIG_IIO_ST_SENSORS_I2C=y CONFIG_IIO_ST_SENSORS_SPI=y CONFIG_IIO_ST_SENSORS_CORE=y # # Digital to analog converters # # CONFIG_AD3552R is not set CONFIG_AD5064=y CONFIG_AD5360=y # CONFIG_AD5380 is not set CONFIG_AD5421=y CONFIG_AD5446=y CONFIG_AD5449=y CONFIG_AD5592R_BASE=y CONFIG_AD5592R=y # CONFIG_AD5593R is not set # CONFIG_AD5504 is not set CONFIG_AD5624R_SPI=y CONFIG_LTC2688=y CONFIG_AD5686=y CONFIG_AD5686_SPI=y CONFIG_AD5696_I2C=y CONFIG_AD5755=y # CONFIG_AD5758 is not set CONFIG_AD5761=y # CONFIG_AD5764 is not set CONFIG_AD5766=y # CONFIG_AD5770R is not set CONFIG_AD5791=y CONFIG_AD7293=y # CONFIG_AD7303 is not set # CONFIG_AD8801 is not set # CONFIG_DPOT_DAC is not set CONFIG_DS4424=y # CONFIG_LPC18XX_DAC is not set # CONFIG_LTC1660 is not set CONFIG_LTC2632=y CONFIG_M62332=y CONFIG_MAX517=y CONFIG_MAX5821=y # CONFIG_MCP4725 is not set CONFIG_MCP4922=y # CONFIG_STM32_DAC is not set CONFIG_TI_DAC082S085=y CONFIG_TI_DAC5571=y # CONFIG_TI_DAC7311 is not set CONFIG_TI_DAC7612=y CONFIG_VF610_DAC=y # end of Digital to analog converters # # IIO dummy driver # # end of IIO dummy driver # # Filters # # end of Filters # # Frequency Synthesizers DDS/PLL # # # Clock Generator/Distribution # CONFIG_AD9523=y # end of Clock Generator/Distribution # # Phase-Locked Loop (PLL) frequency synthesizers # CONFIG_ADF4350=y CONFIG_ADF4371=y # CONFIG_ADMV1013 is not set CONFIG_ADMV4420=y CONFIG_ADRF6780=y # end of Phase-Locked Loop (PLL) frequency synthesizers # end of Frequency Synthesizers DDS/PLL # # Digital gyroscope sensors # CONFIG_ADIS16080=y CONFIG_ADIS16130=y CONFIG_ADIS16136=y CONFIG_ADIS16260=y CONFIG_ADXRS290=y # CONFIG_ADXRS450 is not set CONFIG_BMG160=y CONFIG_BMG160_I2C=y CONFIG_BMG160_SPI=y # CONFIG_FXAS21002C is not set # CONFIG_MPU3050_I2C is not set CONFIG_IIO_ST_GYRO_3AXIS=y # CONFIG_IIO_ST_GYRO_I2C_3AXIS is not set CONFIG_IIO_ST_GYRO_SPI_3AXIS=y CONFIG_ITG3200=y # end of Digital gyroscope sensors # # Health Sensors # # # Heart Rate Monitors # CONFIG_AFE4403=y # CONFIG_AFE4404 is not set CONFIG_MAX30100=y # CONFIG_MAX30102 is not set # end of Heart Rate Monitors # end of Health Sensors # # Humidity sensors # # CONFIG_AM2315 is not set # CONFIG_DHT11 is not set CONFIG_HDC100X=y CONFIG_HDC2010=y # CONFIG_HTS221 is not set CONFIG_HTU21=y CONFIG_SI7005=y # CONFIG_SI7020 is not set # end of Humidity sensors # # Inertial measurement units # CONFIG_ADIS16400=y CONFIG_ADIS16460=y CONFIG_ADIS16475=y # CONFIG_ADIS16480 is not set CONFIG_BMI160=y # CONFIG_BMI160_I2C is not set CONFIG_BMI160_SPI=y # CONFIG_BOSCH_BNO055_SERIAL is not set # CONFIG_BOSCH_BNO055_I2C is not set CONFIG_FXOS8700=y # CONFIG_FXOS8700_I2C is not set CONFIG_FXOS8700_SPI=y CONFIG_KMX61=y CONFIG_INV_ICM42600=y CONFIG_INV_ICM42600_I2C=y CONFIG_INV_ICM42600_SPI=y CONFIG_INV_MPU6050_IIO=y # CONFIG_INV_MPU6050_I2C is not set CONFIG_INV_MPU6050_SPI=y CONFIG_IIO_ST_LSM6DSX=y CONFIG_IIO_ST_LSM6DSX_I2C=y CONFIG_IIO_ST_LSM6DSX_SPI=y CONFIG_IIO_ST_LSM6DSX_I3C=y CONFIG_IIO_ST_LSM9DS0=y CONFIG_IIO_ST_LSM9DS0_I2C=y CONFIG_IIO_ST_LSM9DS0_SPI=y # end of Inertial measurement units CONFIG_IIO_ADIS_LIB=y CONFIG_IIO_ADIS_LIB_BUFFER=y # # Light sensors # CONFIG_ADJD_S311=y CONFIG_ADUX1020=y CONFIG_AL3010=y CONFIG_AL3320A=y # CONFIG_APDS9300 is not set # CONFIG_APDS9960 is not set CONFIG_AS73211=y # CONFIG_BH1750 is not set # CONFIG_BH1780 is not set # CONFIG_CM32181 is not set CONFIG_CM3232=y CONFIG_CM3323=y CONFIG_CM3605=y CONFIG_CM36651=y CONFIG_GP2AP002=y CONFIG_GP2AP020A00F=y # CONFIG_IQS621_ALS is not set CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y CONFIG_ISL29125=y CONFIG_JSA1212=y # CONFIG_RPR0521 is not set CONFIG_LTR501=y CONFIG_LTRF216A=y # CONFIG_LV0104CS is not set CONFIG_MAX44000=y CONFIG_MAX44009=y CONFIG_NOA1305=y CONFIG_OPT3001=y CONFIG_PA12203001=y # CONFIG_SI1133 is not set CONFIG_SI1145=y # CONFIG_STK3310 is not set CONFIG_ST_UVIS25=y CONFIG_ST_UVIS25_I2C=y CONFIG_ST_UVIS25_SPI=y CONFIG_TCS3414=y # CONFIG_TCS3472 is not set # CONFIG_SENSORS_TSL2563 is not set # CONFIG_TSL2583 is not set CONFIG_TSL2591=y CONFIG_TSL2772=y # CONFIG_TSL4531 is not set CONFIG_US5182D=y # CONFIG_VCNL4000 is not set # CONFIG_VCNL4035 is not set CONFIG_VEML6030=y CONFIG_VEML6070=y # CONFIG_VL6180 is not set # CONFIG_ZOPT2201 is not set # end of Light sensors # # Magnetometer sensors # CONFIG_AK8974=y CONFIG_AK8975=y CONFIG_AK09911=y CONFIG_BMC150_MAGN=y CONFIG_BMC150_MAGN_I2C=y # CONFIG_BMC150_MAGN_SPI is not set # CONFIG_MAG3110 is not set CONFIG_MMC35240=y CONFIG_IIO_ST_MAGN_3AXIS=y CONFIG_IIO_ST_MAGN_I2C_3AXIS=y CONFIG_IIO_ST_MAGN_SPI_3AXIS=y CONFIG_SENSORS_HMC5843=y CONFIG_SENSORS_HMC5843_I2C=y CONFIG_SENSORS_HMC5843_SPI=y CONFIG_SENSORS_RM3100=y CONFIG_SENSORS_RM3100_I2C=y CONFIG_SENSORS_RM3100_SPI=y # CONFIG_YAMAHA_YAS530 is not set # end of Magnetometer sensors # # Multiplexers # CONFIG_IIO_MUX=y # end of Multiplexers # # Inclinometer sensors # # end of Inclinometer sensors # CONFIG_IIO_RESCALE_KUNIT_TEST is not set # CONFIG_IIO_FORMAT_KUNIT_TEST is not set # # Triggers - standalone # CONFIG_IIO_INTERRUPT_TRIGGER=y # CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set # CONFIG_IIO_STM32_TIMER_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set # end of Triggers - standalone # # Linear and angular position sensors # # CONFIG_IQS624_POS is not set # end of Linear and angular position sensors # # Digital potentiometers # # CONFIG_AD5110 is not set CONFIG_AD5272=y CONFIG_DS1803=y CONFIG_MAX5432=y CONFIG_MAX5481=y CONFIG_MAX5487=y CONFIG_MCP4018=y CONFIG_MCP4131=y CONFIG_MCP4531=y CONFIG_MCP41010=y CONFIG_TPL0102=y # end of Digital potentiometers # # Digital potentiostats # CONFIG_LMP91000=y # end of Digital potentiostats # # Pressure sensors # CONFIG_ABP060MG=y CONFIG_BMP280=y CONFIG_BMP280_I2C=y CONFIG_BMP280_SPI=y CONFIG_DLHL60D=y CONFIG_DPS310=y # CONFIG_HP03 is not set CONFIG_ICP10100=y CONFIG_MPL115=y CONFIG_MPL115_I2C=y CONFIG_MPL115_SPI=y CONFIG_MPL3115=y # CONFIG_MS5611 is not set CONFIG_MS5637=y # CONFIG_IIO_ST_PRESS is not set CONFIG_T5403=y CONFIG_HP206C=y CONFIG_ZPA2326=y CONFIG_ZPA2326_I2C=y CONFIG_ZPA2326_SPI=y # end of Pressure sensors # # Lightning sensors # # CONFIG_AS3935 is not set # end of Lightning sensors # # Proximity and distance sensors # CONFIG_ISL29501=y # CONFIG_LIDAR_LITE_V2 is not set # CONFIG_MB1232 is not set CONFIG_PING=y CONFIG_RFD77402=y CONFIG_SRF04=y CONFIG_SX_COMMON=y CONFIG_SX9310=y # CONFIG_SX9324 is not set CONFIG_SX9360=y # CONFIG_SX9500 is not set # CONFIG_SRF08 is not set CONFIG_VCNL3020=y # CONFIG_VL53L0X_I2C is not set # end of Proximity and distance sensors # # Resolver to digital converters # # CONFIG_AD2S90 is not set CONFIG_AD2S1200=y # end of Resolver to digital converters # # Temperature sensors # # CONFIG_IQS620AT_TEMP is not set # CONFIG_LTC2983 is not set CONFIG_MAXIM_THERMOCOUPLE=y CONFIG_MLX90614=y CONFIG_MLX90632=y # CONFIG_TMP006 is not set # CONFIG_TMP007 is not set CONFIG_TMP117=y # CONFIG_TSYS01 is not set CONFIG_TSYS02D=y CONFIG_MAX31856=y CONFIG_MAX31865=y # end of Temperature sensors # CONFIG_NTB is not set CONFIG_PWM=y CONFIG_PWM_SYSFS=y CONFIG_PWM_DEBUG=y # CONFIG_PWM_ATMEL is not set CONFIG_PWM_ATMEL_HLCDC_PWM=y # CONFIG_PWM_ATMEL_TCB is not set # CONFIG_PWM_BCM_IPROC is not set # CONFIG_PWM_BCM_KONA is not set # CONFIG_PWM_BCM2835 is not set # CONFIG_PWM_BERLIN is not set # CONFIG_PWM_BRCMSTB is not set CONFIG_PWM_CLK=y # CONFIG_PWM_CLPS711X is not set CONFIG_PWM_DWC=y # CONFIG_PWM_EP93XX is not set CONFIG_PWM_FSL_FTM=y # CONFIG_PWM_HIBVT is not set # CONFIG_PWM_IMG is not set # CONFIG_PWM_IMX1 is not set # CONFIG_PWM_IMX27 is not set # CONFIG_PWM_IMX_TPM is not set # CONFIG_PWM_INTEL_LGM is not set # CONFIG_PWM_IQS620A is not set # CONFIG_PWM_JZ4740 is not set # CONFIG_PWM_KEEMBAY is not set # CONFIG_PWM_LPC18XX_SCT is not set # CONFIG_PWM_LPC32XX is not set # CONFIG_PWM_LPSS_PCI is not set # CONFIG_PWM_LPSS_PLATFORM is not set # CONFIG_PWM_MESON is not set # CONFIG_PWM_MTK_DISP is not set # CONFIG_PWM_MEDIATEK is not set # CONFIG_PWM_MXS is not set CONFIG_PWM_NTXEC=y # CONFIG_PWM_OMAP_DMTIMER is not set # CONFIG_PWM_PCA9685 is not set # CONFIG_PWM_PXA is not set # CONFIG_PWM_RASPBERRYPI_POE is not set # CONFIG_PWM_RCAR is not set # CONFIG_PWM_RENESAS_TPU is not set # CONFIG_PWM_ROCKCHIP is not set # CONFIG_PWM_SAMSUNG is not set # CONFIG_PWM_SIFIVE is not set # CONFIG_PWM_SL28CPLD is not set # CONFIG_PWM_SPEAR is not set # CONFIG_PWM_SPRD is not set # CONFIG_PWM_STI is not set # CONFIG_PWM_STM32 is not set # CONFIG_PWM_STM32_LP is not set # CONFIG_PWM_SUN4I is not set # CONFIG_PWM_SUNPLUS is not set # CONFIG_PWM_TEGRA is not set # CONFIG_PWM_TIECAP is not set # CONFIG_PWM_TIEHRPWM is not set CONFIG_PWM_TWL=y CONFIG_PWM_TWL_LED=y # CONFIG_PWM_VISCONTI is not set # CONFIG_PWM_VT8500 is not set # CONFIG_PWM_XILINX is not set # # IRQ chip support # CONFIG_IRQCHIP=y CONFIG_AL_FIC=y CONFIG_MADERA_IRQ=y CONFIG_OMPIC=y CONFIG_OR1K_PIC=y # CONFIG_JCORE_AIC is not set # CONFIG_RENESAS_INTC_IRQPIN is not set # CONFIG_RENESAS_IRQC is not set # CONFIG_RENESAS_RZA1_IRQC is not set # CONFIG_RENESAS_RZG2L_IRQC is not set # CONFIG_SL28CPLD_INTC is not set # CONFIG_TS4800_IRQ is not set CONFIG_XILINX_INTC=y # CONFIG_INGENIC_TCU_IRQ is not set # CONFIG_IRQ_UNIPHIER_AIDET is not set # CONFIG_MESON_IRQ_GPIO is not set # CONFIG_IMX_IRQSTEER is not set # CONFIG_IMX_INTMUX is not set # CONFIG_IMX_MU_MSI is not set # CONFIG_EXYNOS_IRQ_COMBINER is not set # CONFIG_MST_IRQ is not set # CONFIG_MCHP_EIC is not set # CONFIG_SUNPLUS_SP7021_INTC is not set # end of IRQ chip support CONFIG_IPACK_BUS=y CONFIG_BOARD_TPCI200=y CONFIG_RESET_CONTROLLER=y # CONFIG_RESET_A10SR is not set # CONFIG_RESET_ATH79 is not set # CONFIG_RESET_AXS10X is not set # CONFIG_RESET_BCM6345 is not set # CONFIG_RESET_BERLIN is not set # CONFIG_RESET_BRCMSTB is not set # CONFIG_RESET_BRCMSTB_RESCAL is not set # CONFIG_RESET_HSDK is not set # CONFIG_RESET_IMX7 is not set # CONFIG_RESET_INTEL_GW is not set # CONFIG_RESET_K210 is not set # CONFIG_RESET_LANTIQ is not set # CONFIG_RESET_LPC18XX is not set # CONFIG_RESET_MCHP_SPARX5 is not set # CONFIG_RESET_MESON is not set # CONFIG_RESET_MESON_AUDIO_ARB is not set # CONFIG_RESET_NPCM is not set # CONFIG_RESET_PISTACHIO is not set # CONFIG_RESET_QCOM_AOSS is not set # CONFIG_RESET_QCOM_PDC is not set CONFIG_RESET_RASPBERRYPI=y # CONFIG_RESET_RZG2L_USBPHY_CTRL is not set # CONFIG_RESET_SCMI is not set CONFIG_RESET_SIMPLE=y # CONFIG_RESET_SOCFPGA is not set # CONFIG_RESET_STARFIVE_JH7100 is not set # CONFIG_RESET_SUNPLUS is not set # CONFIG_RESET_SUNXI is not set # CONFIG_RESET_TI_SCI is not set CONFIG_RESET_TI_SYSCON=y CONFIG_RESET_TI_TPS380X=y # CONFIG_RESET_TN48M_CPLD is not set # CONFIG_RESET_UNIPHIER is not set # CONFIG_RESET_UNIPHIER_GLUE is not set # CONFIG_RESET_ZYNQ is not set # CONFIG_COMMON_RESET_HI3660 is not set # CONFIG_COMMON_RESET_HI6220 is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y CONFIG_GENERIC_PHY_MIPI_DPHY=y # CONFIG_PHY_LPC18XX_USB_OTG is not set # CONFIG_PHY_PISTACHIO_USB is not set # CONFIG_PHY_XGENE is not set # CONFIG_USB_LGM_PHY is not set CONFIG_PHY_CAN_TRANSCEIVER=y # CONFIG_PHY_SUN4I_USB is not set # CONFIG_PHY_SUN6I_MIPI_DPHY is not set # CONFIG_PHY_SUN9I_USB is not set # CONFIG_PHY_SUN50I_USB3 is not set # CONFIG_PHY_MESON8_HDMI_TX is not set # CONFIG_PHY_MESON8B_USB2 is not set # CONFIG_PHY_MESON_GXL_USB2 is not set # CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set # CONFIG_PHY_MESON_G12A_USB2 is not set # CONFIG_PHY_MESON_G12A_USB3_PCIE is not set # CONFIG_PHY_MESON_AXG_PCIE is not set # CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set # CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set # # PHY drivers for Broadcom platforms # # CONFIG_PHY_BCM63XX_USBH is not set # CONFIG_PHY_CYGNUS_PCIE is not set # CONFIG_PHY_BCM_SR_USB is not set CONFIG_BCM_KONA_USB2_PHY=y # CONFIG_PHY_BCM_NS_USB2 is not set # CONFIG_PHY_BCM_NS_USB3 is not set # CONFIG_PHY_NS2_PCIE is not set # CONFIG_PHY_NS2_USB_DRD is not set # CONFIG_PHY_BRCM_SATA is not set # CONFIG_PHY_BRCM_USB is not set # CONFIG_PHY_BCM_SR_PCIE is not set # end of PHY drivers for Broadcom platforms CONFIG_PHY_CADENCE_TORRENT=y CONFIG_PHY_CADENCE_DPHY=y # CONFIG_PHY_CADENCE_DPHY_RX is not set # CONFIG_PHY_CADENCE_SIERRA is not set # CONFIG_PHY_CADENCE_SALVO is not set # CONFIG_PHY_FSL_IMX8MQ_USB is not set # CONFIG_PHY_MIXEL_LVDS_PHY is not set # CONFIG_PHY_MIXEL_MIPI_DPHY is not set # CONFIG_PHY_FSL_IMX8M_PCIE is not set # CONFIG_PHY_FSL_LYNX_28G is not set # CONFIG_PHY_HI6220_USB is not set # CONFIG_PHY_HI3660_USB is not set # CONFIG_PHY_HI3670_USB is not set # CONFIG_PHY_HI3670_PCIE is not set # CONFIG_PHY_HISTB_COMBPHY is not set # CONFIG_PHY_HISI_INNO_USB2 is not set # CONFIG_PHY_INGENIC_USB is not set # CONFIG_PHY_LANTIQ_VRX200_PCIE is not set # CONFIG_PHY_LANTIQ_RCU_USB2 is not set # CONFIG_ARMADA375_USBCLUSTER_PHY is not set # CONFIG_PHY_BERLIN_SATA is not set # CONFIG_PHY_BERLIN_USB is not set CONFIG_PHY_MVEBU_A3700_UTMI=y # CONFIG_PHY_MVEBU_A38X_COMPHY is not set # CONFIG_PHY_MVEBU_CP110_UTMI is not set # CONFIG_PHY_PXA_28NM_HSIC is not set CONFIG_PHY_PXA_28NM_USB2=y # CONFIG_PHY_PXA_USB is not set # CONFIG_PHY_MMP3_USB is not set # CONFIG_PHY_MMP3_HSIC is not set # CONFIG_PHY_MTK_PCIE is not set # CONFIG_PHY_MTK_TPHY is not set # CONFIG_PHY_MTK_UFS is not set # CONFIG_PHY_MTK_XSPHY is not set # CONFIG_PHY_MTK_HDMI is not set # CONFIG_PHY_MTK_MIPI_DSI is not set # CONFIG_PHY_MTK_DP is not set # CONFIG_PHY_SPARX5_SERDES is not set # CONFIG_PHY_LAN966X_SERDES is not set CONFIG_PHY_CPCAP_USB=y CONFIG_PHY_MAPPHONE_MDM6600=y CONFIG_PHY_OCELOT_SERDES=y # CONFIG_PHY_ATH79_USB is not set # CONFIG_PHY_QCOM_EDP is not set # CONFIG_PHY_QCOM_IPQ4019_USB is not set # CONFIG_PHY_QCOM_PCIE2 is not set # CONFIG_PHY_QCOM_QMP is not set # CONFIG_PHY_QCOM_QUSB2 is not set CONFIG_PHY_QCOM_USB_HS=y # CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set # CONFIG_PHY_QCOM_USB_HSIC is not set # CONFIG_PHY_QCOM_USB_HS_28NM is not set # CONFIG_PHY_QCOM_USB_SS is not set # CONFIG_PHY_QCOM_IPQ806X_USB is not set # CONFIG_PHY_MT7621_PCI is not set # CONFIG_PHY_RALINK_USB is not set # CONFIG_PHY_RCAR_GEN3_USB3 is not set # CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set # CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set # CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set # CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set # CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set # CONFIG_PHY_ROCKCHIP_PCIE is not set # CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set # CONFIG_PHY_ROCKCHIP_TYPEC is not set # CONFIG_PHY_EXYNOS_DP_VIDEO is not set # CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set # CONFIG_PHY_EXYNOS_PCIE is not set # CONFIG_PHY_SAMSUNG_UFS is not set # CONFIG_PHY_SAMSUNG_USB2 is not set CONFIG_PHY_EXYNOS5_USBDRD=y # CONFIG_PHY_UNIPHIER_USB2 is not set # CONFIG_PHY_UNIPHIER_USB3 is not set # CONFIG_PHY_UNIPHIER_PCIE is not set # CONFIG_PHY_UNIPHIER_AHCI is not set # CONFIG_PHY_ST_SPEAR1310_MIPHY is not set # CONFIG_PHY_ST_SPEAR1340_MIPHY is not set # CONFIG_PHY_STIH407_USB is not set # CONFIG_PHY_STM32_USBPHYC is not set # CONFIG_PHY_SUNPLUS_USB is not set # CONFIG_PHY_TEGRA194_P2U is not set # CONFIG_PHY_DA8XX_USB is not set # CONFIG_PHY_DM816X_USB is not set # CONFIG_PHY_AM654_SERDES is not set # CONFIG_PHY_J721E_WIZ is not set # CONFIG_OMAP_CONTROL_PHY is not set # CONFIG_TI_PIPE3 is not set CONFIG_PHY_TUSB1210=y # CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set # CONFIG_PHY_INTEL_KEEMBAY_USB is not set # CONFIG_PHY_INTEL_LGM_COMBO is not set # CONFIG_PHY_INTEL_LGM_EMMC is not set # CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set # CONFIG_PHY_XILINX_ZYNQMP is not set # end of PHY Subsystem CONFIG_POWERCAP=y # CONFIG_DTPM is not set CONFIG_MCB=y CONFIG_MCB_PCI=y CONFIG_MCB_LPC=y # CONFIG_RAS is not set CONFIG_USB4=y # CONFIG_USB4_DEBUGFS_WRITE is not set CONFIG_USB4_KUNIT_TEST=y CONFIG_USB4_DMA_TEST=y # # Android # CONFIG_ANDROID_BINDER_IPC=y CONFIG_ANDROID_BINDERFS=y CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder" CONFIG_ANDROID_BINDER_IPC_SELFTEST=y # end of Android # CONFIG_DAX is not set CONFIG_NVMEM=y CONFIG_NVMEM_SYSFS=y # CONFIG_NVMEM_APPLE_EFUSES is not set # CONFIG_NVMEM_BCM_OCOTP is not set # CONFIG_NVMEM_BRCM_NVRAM is not set # CONFIG_NVMEM_IMX_IIM is not set # CONFIG_NVMEM_IMX_OCOTP is not set # CONFIG_NVMEM_JZ4780_EFUSE is not set # CONFIG_NVMEM_LAN9662_OTPC is not set # CONFIG_NVMEM_LAYERSCAPE_SFP is not set # CONFIG_NVMEM_LPC18XX_EEPROM is not set # CONFIG_NVMEM_LPC18XX_OTP is not set # CONFIG_NVMEM_MESON_MX_EFUSE is not set # CONFIG_NVMEM_MICROCHIP_OTPC is not set # CONFIG_NVMEM_MTK_EFUSE is not set # CONFIG_NVMEM_MXS_OCOTP is not set # CONFIG_NVMEM_NINTENDO_OTP is not set # CONFIG_NVMEM_QCOM_QFPROM is not set # CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_ROCKCHIP_EFUSE is not set # CONFIG_NVMEM_ROCKCHIP_OTP is not set # CONFIG_NVMEM_SC27XX_EFUSE is not set # CONFIG_NVMEM_SNVS_LPGPR is not set CONFIG_NVMEM_SPMI_SDAM=y # CONFIG_NVMEM_SPRD_EFUSE is not set # CONFIG_NVMEM_STM32_ROMEM is not set # CONFIG_NVMEM_SUNPLUS_OCOTP is not set CONFIG_NVMEM_U_BOOT_ENV=y # CONFIG_NVMEM_UNIPHIER_EFUSE is not set # CONFIG_NVMEM_VF610_OCOTP is not set # # HW tracing support # CONFIG_STM=y # CONFIG_STM_PROTO_BASIC is not set # CONFIG_STM_PROTO_SYS_T is not set # CONFIG_STM_DUMMY is not set # CONFIG_STM_SOURCE_CONSOLE is not set CONFIG_STM_SOURCE_HEARTBEAT=y # CONFIG_STM_SOURCE_FTRACE is not set CONFIG_INTEL_TH=y CONFIG_INTEL_TH_PCI=y CONFIG_INTEL_TH_GTH=y CONFIG_INTEL_TH_STH=y CONFIG_INTEL_TH_MSU=y CONFIG_INTEL_TH_PTI=y # CONFIG_INTEL_TH_DEBUG is not set # end of HW tracing support CONFIG_FPGA=y # CONFIG_FPGA_MGR_SOCFPGA is not set # CONFIG_FPGA_MGR_SOCFPGA_A10 is not set # CONFIG_ALTERA_PR_IP_CORE is not set CONFIG_FPGA_MGR_ALTERA_PS_SPI=y # CONFIG_FPGA_MGR_ALTERA_CVP is not set # CONFIG_FPGA_MGR_ZYNQ_FPGA is not set CONFIG_FPGA_MGR_XILINX_SPI=y CONFIG_FPGA_MGR_ICE40_SPI=y CONFIG_FPGA_MGR_MACHXO2_SPI=y CONFIG_FPGA_BRIDGE=y CONFIG_ALTERA_FREEZE_BRIDGE=y # CONFIG_XILINX_PR_DECOUPLER is not set CONFIG_FPGA_REGION=y # CONFIG_OF_FPGA_REGION is not set CONFIG_FPGA_DFL=y # CONFIG_FPGA_DFL_AFU is not set CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=y CONFIG_FPGA_DFL_PCI=y # CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set # CONFIG_FPGA_MGR_VERSAL_FPGA is not set CONFIG_FPGA_M10_BMC_SEC_UPDATE=y # CONFIG_FPGA_MGR_MICROCHIP_SPI is not set CONFIG_FSI=y CONFIG_FSI_NEW_DEV_NODE=y # CONFIG_FSI_MASTER_GPIO is not set CONFIG_FSI_MASTER_HUB=y CONFIG_FSI_MASTER_ASPEED=y CONFIG_FSI_SCOM=y # CONFIG_FSI_SBEFIFO is not set # CONFIG_TEE is not set CONFIG_MULTIPLEXER=y # # Multiplexer drivers # CONFIG_MUX_ADG792A=y # CONFIG_MUX_ADGS1408 is not set CONFIG_MUX_GPIO=y # CONFIG_MUX_MMIO is not set # end of Multiplexer drivers CONFIG_PM_OPP=y CONFIG_SIOX=y # CONFIG_SIOX_BUS_GPIO is not set # CONFIG_SLIMBUS is not set CONFIG_INTERCONNECT=y # CONFIG_INTERCONNECT_IMX is not set # CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set # CONFIG_INTERCONNECT_SAMSUNG is not set # CONFIG_COUNTER is not set # CONFIG_MOST is not set # CONFIG_PECI is not set CONFIG_HTE=y # end of Device Drivers # # File systems # # CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set # CONFIG_EXT4_KUNIT_TESTS is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=y CONFIG_JFS_POSIX_ACL=y # CONFIG_JFS_SECURITY is not set CONFIG_JFS_DEBUG=y CONFIG_JFS_STATISTICS=y CONFIG_XFS_FS=y # CONFIG_XFS_SUPPORT_V4 is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set CONFIG_XFS_ONLINE_SCRUB=y # CONFIG_XFS_ONLINE_REPAIR is not set CONFIG_XFS_WARN=y # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=y # CONFIG_GFS2_FS_LOCKING_DLM is not set CONFIG_OCFS2_FS=y CONFIG_OCFS2_FS_O2CB=y CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y # CONFIG_OCFS2_FS_STATS is not set CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_NILFS2_FS=y # CONFIG_F2FS_FS is not set CONFIG_ZONEFS_FS=y CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_EXPORTFS_BLOCK_OPS=y # CONFIG_FILE_LOCKING is not set CONFIG_FS_ENCRYPTION=y CONFIG_FS_ENCRYPTION_ALGS=y CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y # CONFIG_FS_VERITY is not set CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set # CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y CONFIG_QFMT_V1=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=y CONFIG_AUTOFS_FS=y CONFIG_FUSE_FS=y CONFIG_CUSE=y CONFIG_VIRTIO_FS=y # CONFIG_OVERLAY_FS is not set # # Caches # CONFIG_NETFS_SUPPORT=y CONFIG_NETFS_STATS=y CONFIG_FSCACHE=y CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_DEBUG is not set CONFIG_CACHEFILES=y CONFIG_CACHEFILES_DEBUG=y CONFIG_CACHEFILES_ONDEMAND=y # end of Caches # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=y # end of CD-ROM/DVD Filesystems # # DOS/FAT/EXFAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_FAT_DEFAULT_UTF8=y # CONFIG_FAT_KUNIT_TEST is not set CONFIG_EXFAT_FS=y CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # CONFIG_NTFS3_FS is not set # end of DOS/FAT/EXFAT/NT Filesystems # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set # CONFIG_PROC_SYSCTL is not set CONFIG_PROC_PAGE_MONITOR=y # CONFIG_PROC_CHILDREN is not set CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_TMPFS_XATTR is not set CONFIG_MEMFD_CREATE=y CONFIG_CONFIGFS_FS=y # end of Pseudo filesystems # CONFIG_MISC_FILESYSTEMS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set CONFIG_NLS_CODEPAGE_852=y CONFIG_NLS_CODEPAGE_855=y CONFIG_NLS_CODEPAGE_857=y # CONFIG_NLS_CODEPAGE_860 is not set CONFIG_NLS_CODEPAGE_861=y CONFIG_NLS_CODEPAGE_862=y # CONFIG_NLS_CODEPAGE_863 is not set CONFIG_NLS_CODEPAGE_864=y # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set CONFIG_NLS_CODEPAGE_869=y CONFIG_NLS_CODEPAGE_936=y CONFIG_NLS_CODEPAGE_950=y # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set CONFIG_NLS_CODEPAGE_874=y # CONFIG_NLS_ISO8859_8 is not set CONFIG_NLS_CODEPAGE_1250=y # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_ISO8859_3=y # CONFIG_NLS_ISO8859_4 is not set CONFIG_NLS_ISO8859_5=y # CONFIG_NLS_ISO8859_6 is not set CONFIG_NLS_ISO8859_7=y # CONFIG_NLS_ISO8859_9 is not set CONFIG_NLS_ISO8859_13=y CONFIG_NLS_ISO8859_14=y # CONFIG_NLS_ISO8859_15 is not set CONFIG_NLS_KOI8_R=y CONFIG_NLS_KOI8_U=y CONFIG_NLS_MAC_ROMAN=y CONFIG_NLS_MAC_CELTIC=y CONFIG_NLS_MAC_CENTEURO=y CONFIG_NLS_MAC_CROATIAN=y CONFIG_NLS_MAC_CYRILLIC=y CONFIG_NLS_MAC_GAELIC=y # CONFIG_NLS_MAC_GREEK is not set CONFIG_NLS_MAC_ICELAND=y CONFIG_NLS_MAC_INUIT=y CONFIG_NLS_MAC_ROMANIAN=y CONFIG_NLS_MAC_TURKISH=y CONFIG_NLS_UTF8=y CONFIG_DLM=y CONFIG_DLM_DEPRECATED_API=y CONFIG_DLM_DEBUG=y CONFIG_UNICODE=y CONFIG_UNICODE_NORMALIZATION_SELFTEST=y CONFIG_IO_WQ=y # end of File systems # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_REQUEST_CACHE is not set # CONFIG_PERSISTENT_KEYRINGS is not set # CONFIG_TRUSTED_KEYS is not set CONFIG_ENCRYPTED_KEYS=y CONFIG_USER_DECRYPTED_DATA=y CONFIG_KEY_DH_OPERATIONS=y CONFIG_KEY_NOTIFICATIONS=y CONFIG_SECURITY_DMESG_RESTRICT=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y # CONFIG_HARDENED_USERCOPY is not set CONFIG_STATIC_USERMODEHELPER=y CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper" CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf" # # Kernel hardening options # # # Memory initialization # CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y # CONFIG_INIT_STACK_NONE is not set # CONFIG_INIT_STACK_ALL_PATTERN is not set CONFIG_INIT_STACK_ALL_ZERO=y # CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y CONFIG_ZERO_CALL_USED_REGS=y # end of Memory initialization CONFIG_RANDSTRUCT_NONE=y # end of Kernel hardening options # end of Security options CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_SKCIPHER=y CONFIG_CRYPTO_SKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y CONFIG_CRYPTO_KPP2=y CONFIG_CRYPTO_KPP=y CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=y CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y CONFIG_CRYPTO_PCRYPT=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=y # end of Crypto core or helper # # Public-key cryptography # CONFIG_CRYPTO_RSA=y CONFIG_CRYPTO_DH=y CONFIG_CRYPTO_DH_RFC7919_GROUPS=y CONFIG_CRYPTO_ECC=y CONFIG_CRYPTO_ECDH=y CONFIG_CRYPTO_ECDSA=y CONFIG_CRYPTO_ECRDSA=y CONFIG_CRYPTO_SM2=y CONFIG_CRYPTO_CURVE25519=y # end of Public-key cryptography # # Block ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set CONFIG_CRYPTO_ARIA=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST_COMMON=y # CONFIG_CRYPTO_CAST5 is not set CONFIG_CRYPTO_CAST6=y # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_SM4=y CONFIG_CRYPTO_SM4_GENERIC=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y # end of Block ciphers # # Length-preserving ciphers and modes # CONFIG_CRYPTO_ADIANTUM=y CONFIG_CRYPTO_CHACHA20=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CFB=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_HCTR2=y CONFIG_CRYPTO_KEYWRAP=y CONFIG_CRYPTO_LRW=y # CONFIG_CRYPTO_OFB is not set CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_XCTR=y # CONFIG_CRYPTO_XTS is not set CONFIG_CRYPTO_NHPOLY1305=y # end of Length-preserving ciphers and modes # # AEAD (authenticated encryption with associated data) ciphers # # CONFIG_CRYPTO_AEGIS128 is not set CONFIG_CRYPTO_CHACHA20POLY1305=y CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ESSIV=y # end of AEAD (authenticated encryption with associated data) ciphers # # Hashes, digests, and MACs # # CONFIG_CRYPTO_BLAKE2B is not set CONFIG_CRYPTO_CMAC=y CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_POLYVAL=y CONFIG_CRYPTO_POLY1305=y CONFIG_CRYPTO_RMD160=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_SHA3=y CONFIG_CRYPTO_SM3=y CONFIG_CRYPTO_SM3_GENERIC=y CONFIG_CRYPTO_STREEBOG=y CONFIG_CRYPTO_VMAC=y CONFIG_CRYPTO_WP512=y # CONFIG_CRYPTO_XCBC is not set CONFIG_CRYPTO_XXHASH=y # end of Hashes, digests, and MACs # # CRCs (cyclic redundancy checks) # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32=y CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_CRC64_ROCKSOFT=y # end of CRCs (cyclic redundancy checks) # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_842=y # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set CONFIG_CRYPTO_ZSTD=y # end of Compression # # Random number generation # CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_DRBG_MENU=y CONFIG_CRYPTO_DRBG_HMAC=y CONFIG_CRYPTO_DRBG_HASH=y # CONFIG_CRYPTO_DRBG_CTR is not set CONFIG_CRYPTO_DRBG=y CONFIG_CRYPTO_JITTERENTROPY=y CONFIG_CRYPTO_KDF800108_CTR=y # end of Random number generation # # Userspace interface # CONFIG_CRYPTO_USER_API=y CONFIG_CRYPTO_USER_API_HASH=y # CONFIG_CRYPTO_USER_API_SKCIPHER is not set # CONFIG_CRYPTO_USER_API_RNG is not set # CONFIG_CRYPTO_USER_API_AEAD is not set # CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set # CONFIG_CRYPTO_STATS is not set # end of Userspace interface CONFIG_CRYPTO_HASH_INFO=y # CONFIG_CRYPTO_HW is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y # CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set CONFIG_PKCS7_MESSAGE_PARSER=y CONFIG_PKCS7_TEST_KEY=y # CONFIG_SIGNED_PE_FILE_VERIFICATION is not set CONFIG_FIPS_SIGNATURE_SELFTEST=y # # Certificates for signature checking # CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set # CONFIG_SECONDARY_TRUSTED_KEYRING is not set # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set # end of Certificates for signature checking CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_LINEAR_RANGES=y # CONFIG_PACKING is not set CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_CORDIC=y CONFIG_PRIME_NUMBERS=y CONFIG_RATIONAL=y CONFIG_GENERIC_PCI_IOMAP=y # # Crypto library routines # CONFIG_CRYPTO_LIB_UTILS=y CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y # CONFIG_CRYPTO_LIB_CHACHA is not set CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y # CONFIG_CRYPTO_LIB_CURVE25519 is not set CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y # CONFIG_CRYPTO_LIB_POLY1305 is not set # CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set CONFIG_CRYPTO_LIB_SHA1=y CONFIG_CRYPTO_LIB_SHA256=y # end of Crypto library routines CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC64_ROCKSOFT=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC32_SELFTEST=y # CONFIG_CRC32_SLICEBY8 is not set # CONFIG_CRC32_SLICEBY4 is not set CONFIG_CRC32_SARWATE=y # CONFIG_CRC32_BIT is not set CONFIG_CRC64=y CONFIG_CRC4=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_CRC8=y CONFIG_XXHASH=y # CONFIG_RANDOM32_SELFTEST is not set CONFIG_842_COMPRESS=y CONFIG_842_DECOMPRESS=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZ4_COMPRESS=y CONFIG_ZSTD_COMMON=y CONFIG_ZSTD_COMPRESS=y CONFIG_ZSTD_DECOMPRESS=y CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set CONFIG_XZ_DEC_IA64=y # CONFIG_XZ_DEC_ARM is not set CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_MICROLZMA=y CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_GENERIC_ALLOCATOR=y CONFIG_REED_SOLOMON=y CONFIG_REED_SOLOMON_DEC8=y CONFIG_REED_SOLOMON_ENC16=y CONFIG_REED_SOLOMON_DEC16=y CONFIG_BCH=y CONFIG_INTERVAL_TREE=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y CONFIG_DMA_OPS=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_DMA_DECLARE_COHERENT=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y CONFIG_DMA_API_DEBUG=y CONFIG_DMA_API_DEBUG_SG=y # CONFIG_DMA_MAP_BENCHMARK is not set CONFIG_SGL_ALLOC=y # CONFIG_FORCE_NR_CPUS is not set CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y CONFIG_GENERIC_ATOMIC64=y CONFIG_LRU_CACHE=y CONFIG_CLZ_TAB=y # CONFIG_IRQ_POLL is not set CONFIG_MPILIB=y CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y CONFIG_FONT_SUPPORT=y CONFIG_FONT_8x16=y CONFIG_FONT_AUTOSELECT=y CONFIG_SG_POOL=y CONFIG_STACKDEPOT=y CONFIG_STACKDEPOT_ALWAYS_INIT=y CONFIG_REF_TRACKER=y CONFIG_SBITMAP=y # CONFIG_PARMAN is not set # CONFIG_OBJAGG is not set # end of Library routines # # Kernel hacking # # # printk and dmesg options # # CONFIG_PRINTK_TIME is not set CONFIG_PRINTK_CALLER=y # CONFIG_STACKTRACE_BUILD_ID is not set CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 CONFIG_DYNAMIC_DEBUG=y CONFIG_DYNAMIC_DEBUG_CORE=y # CONFIG_SYMBOLIC_ERRNAME is not set # end of printk and dmesg options CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MISC=y # # Compile-time checks and compiler options # CONFIG_DEBUG_INFO=y CONFIG_AS_HAS_NON_CONST_LEB128=y # CONFIG_DEBUG_INFO_NONE is not set CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_DEBUG_INFO_DWARF4 is not set # CONFIG_DEBUG_INFO_DWARF5 is not set CONFIG_DEBUG_INFO_REDUCED=y # CONFIG_DEBUG_INFO_COMPRESSED is not set # CONFIG_DEBUG_INFO_SPLIT is not set CONFIG_PAHOLE_HAS_SPLIT_BTF=y CONFIG_GDB_SCRIPTS=y CONFIG_FRAME_WARN=1024 CONFIG_STRIP_ASM_SYMS=y CONFIG_READABLE_ASM=y # CONFIG_HEADERS_INSTALL is not set CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_SECTION_MISMATCH_WARN_ONLY=y CONFIG_ARCH_WANT_FRAME_POINTERS=y # CONFIG_FRAME_POINTER is not set # CONFIG_VMLINUX_MAP is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # end of Compile-time checks and compiler options # # Generic Kernel Debugging Instruments # # CONFIG_MAGIC_SYSRQ is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_FS_ALLOW_ALL is not set CONFIG_DEBUG_FS_DISALLOW_MOUNT=y # CONFIG_DEBUG_FS_ALLOW_NONE is not set CONFIG_UBSAN=y CONFIG_CC_HAS_UBSAN_BOUNDS=y CONFIG_UBSAN_BOUNDS=y CONFIG_UBSAN_ONLY_BOUNDS=y CONFIG_UBSAN_SHIFT=y CONFIG_UBSAN_DIV_ZERO=y # CONFIG_UBSAN_UNREACHABLE is not set CONFIG_UBSAN_BOOL=y CONFIG_UBSAN_ENUM=y CONFIG_HAVE_KCSAN_COMPILER=y # end of Generic Kernel Debugging Instruments # # Networking Debugging # CONFIG_NET_DEV_REFCNT_TRACKER=y CONFIG_NET_NS_REFCNT_TRACKER=y CONFIG_DEBUG_NET=y # end of Networking Debugging # # Memory Debugging # CONFIG_PAGE_EXTENSION=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_SLUB_DEBUG=y CONFIG_SLUB_DEBUG_ON=y CONFIG_PAGE_OWNER=y CONFIG_PAGE_POISONING=y # CONFIG_DEBUG_PAGE_REF is not set CONFIG_DEBUG_OBJECTS=y # CONFIG_DEBUG_OBJECTS_SELFTEST is not set CONFIG_DEBUG_OBJECTS_FREE=y CONFIG_DEBUG_OBJECTS_TIMERS=y # CONFIG_DEBUG_OBJECTS_WORK is not set # CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 CONFIG_SHRINKER_DEBUG=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_SCHED_STACK_END_CHECK=y CONFIG_DEBUG_VM_IRQSOFF=y CONFIG_DEBUG_VM=y CONFIG_DEBUG_VM_MAPLE_TREE=y CONFIG_DEBUG_VM_RB=y CONFIG_DEBUG_VM_PGFLAGS=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACKOVERFLOW is not set CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y # end of Memory Debugging # CONFIG_DEBUG_SHIRQ is not set # # Debug Oops, Lockups and Hangs # # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_PANIC_TIMEOUT=0 CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y # CONFIG_DETECT_HUNG_TASK is not set CONFIG_WQ_WATCHDOG=y # end of Debug Oops, Lockups and Hangs # # Scheduler Debugging # # CONFIG_SCHED_DEBUG is not set CONFIG_SCHED_INFO=y CONFIG_SCHEDSTATS=y # end of Scheduler Debugging CONFIG_DEBUG_TIMEKEEPING=y # # Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RAW_LOCK_NESTING=y CONFIG_LOCK_STAT=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y CONFIG_DEBUG_RWSEMS=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_LOCKDEP=y CONFIG_LOCKDEP_BITS=15 CONFIG_LOCKDEP_CHAINS_BITS=16 CONFIG_LOCKDEP_STACK_TRACE_BITS=19 CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14 CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12 # CONFIG_DEBUG_LOCKDEP is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set CONFIG_DEBUG_LOCKING_API_SELFTESTS=y # CONFIG_LOCK_TORTURE_TEST is not set CONFIG_WW_MUTEX_SELFTEST=y CONFIG_SCF_TORTURE_TEST=y # end of Lock Debugging (spinlocks, mutexes, etc...) CONFIG_TRACE_IRQFLAGS=y CONFIG_DEBUG_IRQFLAGS=y CONFIG_STACKTRACE=y CONFIG_WARN_ALL_UNSEEDED_RANDOM=y CONFIG_DEBUG_KOBJECT=y CONFIG_DEBUG_KOBJECT_RELEASE=y # # Debug kernel data structures # CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_PLIST is not set CONFIG_DEBUG_SG=y # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BUG_ON_DATA_CORRUPTION is not set CONFIG_DEBUG_MAPLE_TREE=y # end of Debug kernel data structures CONFIG_DEBUG_CREDENTIALS=y # # RCU Debugging # CONFIG_PROVE_RCU=y CONFIG_PROVE_RCU_LIST=y CONFIG_TORTURE_TEST=y CONFIG_RCU_SCALE_TEST=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_REF_SCALE_TEST=y CONFIG_RCU_CPU_STALL_TIMEOUT=21 CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0 CONFIG_RCU_TRACE=y # CONFIG_RCU_EQS_DEBUG is not set # CONFIG_RCU_STRICT_GRACE_PERIOD is not set # end of RCU Debugging CONFIG_DEBUG_WQ_FORCE_RR_CPU=y CONFIG_NOP_TRACER=y CONFIG_TRACER_MAX_TRACE=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_PREEMPTIRQ_TRACEPOINTS=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_BOOTTIME_TRACING=y CONFIG_IRQSOFF_TRACER=y # CONFIG_SCHED_TRACER is not set CONFIG_HWLAT_TRACER=y # CONFIG_OSNOISE_TRACER is not set # CONFIG_TIMERLAT_TRACER is not set CONFIG_TRACER_SNAPSHOT=y CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y CONFIG_TRACE_BRANCH_PROFILING=y # CONFIG_BRANCH_PROFILE_NONE is not set # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set CONFIG_PROFILE_ALL_BRANCHES=y CONFIG_TRACING_BRANCHES=y CONFIG_BRANCH_TRACER=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SYNTH_EVENTS is not set # CONFIG_USER_EVENTS is not set # CONFIG_TRACE_EVENT_INJECT is not set # CONFIG_TRACEPOINT_BENCHMARK is not set CONFIG_RING_BUFFER_BENCHMARK=y # CONFIG_TRACE_EVAL_MAP_FILE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_RING_BUFFER_STARTUP_TEST is not set # CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set # CONFIG_RV is not set # CONFIG_SAMPLES is not set # # openrisc Debugging # # end of openrisc Debugging # # Kernel Testing and Coverage # CONFIG_KUNIT=y CONFIG_KUNIT_DEBUGFS=y # CONFIG_KUNIT_TEST is not set CONFIG_KUNIT_EXAMPLE_TEST=y # CONFIG_KUNIT_ALL_TESTS is not set # CONFIG_KUNIT_DEFAULT_ENABLED is not set CONFIG_NOTIFIER_ERROR_INJECTION=y CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y # CONFIG_FAULT_INJECTION is not set CONFIG_CC_HAS_SANCOV_TRACE_PC=y CONFIG_RUNTIME_TESTING_MENU=y CONFIG_LKDTM=y CONFIG_CPUMASK_KUNIT_TEST=y CONFIG_TEST_LIST_SORT=y CONFIG_TEST_MIN_HEAP=y CONFIG_TEST_SORT=y CONFIG_TEST_DIV64=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_TEST_REF_TRACKER is not set CONFIG_RBTREE_TEST=y CONFIG_REED_SOLOMON_TEST=y CONFIG_INTERVAL_TREE_TEST=y # CONFIG_ATOMIC64_SELFTEST is not set CONFIG_TEST_HEXDUMP=y CONFIG_STRING_SELFTEST=y # CONFIG_TEST_STRING_HELPERS is not set CONFIG_TEST_STRSCPY=y # CONFIG_TEST_KSTRTOX is not set CONFIG_TEST_PRINTF=y CONFIG_TEST_SCANF=y # CONFIG_TEST_BITMAP is not set # CONFIG_TEST_UUID is not set # CONFIG_TEST_XARRAY is not set CONFIG_TEST_MAPLE_TREE=y # CONFIG_TEST_RHASHTABLE is not set CONFIG_TEST_SIPHASH=y # CONFIG_TEST_IDA is not set CONFIG_FIND_BIT_BENCHMARK=y CONFIG_TEST_FIRMWARE=y CONFIG_BITFIELD_KUNIT=y CONFIG_HASH_KUNIT_TEST=y CONFIG_RESOURCE_KUNIT_TEST=y CONFIG_SYSCTL_KUNIT_TEST=y CONFIG_LIST_KUNIT_TEST=y # CONFIG_LINEAR_RANGES_TEST is not set CONFIG_CMDLINE_KUNIT_TEST=y # CONFIG_BITS_TEST is not set # CONFIG_SLUB_KUNIT_TEST is not set # CONFIG_RATIONAL_KUNIT_TEST is not set CONFIG_MEMCPY_KUNIT_TEST=y # CONFIG_IS_SIGNED_TYPE_KUNIT_TEST is not set CONFIG_OVERFLOW_KUNIT_TEST=y CONFIG_STACKINIT_KUNIT_TEST=y # CONFIG_TEST_UDELAY is not set # CONFIG_TEST_DYNAMIC_DEBUG is not set # CONFIG_TEST_MEMCAT_P is not set CONFIG_TEST_MEMINIT=y # CONFIG_TEST_FREE_PAGES is not set # end of Kernel Testing and Coverage # # Rust hacking # # end of Rust hacking # CONFIG_WARN_MISSING_DOCUMENTS is not set # CONFIG_WARN_ABI_ERRORS is not set # end of Kernel hacking ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns @ 2022-12-06 9:22 ` kernel test robot 0 siblings, 0 replies; 67+ messages in thread From: kernel test robot @ 2022-12-06 9:22 UTC (permalink / raw) To: Nitesh Shetty, axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, oe-kbuild-all, linux-fsdevel, nitheshshetty [-- Attachment #1: Type: text/plain, Size: 5841 bytes --] Hi Nitesh, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on axboe-block/for-next] [also build test WARNING on next-20221206] [cannot apply to device-mapper-dm/for-next linus/master v6.1-rc8] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Nitesh-Shetty/block-Introduce-queue-limits-for-copy-offload-support/20221123-145837 base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next patch link: https://lore.kernel.org/r/20221123055827.26996-7-nj.shetty%40samsung.com patch subject: [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns config: openrisc-randconfig-s041-20221205 compiler: or1k-linux-gcc (GCC) 12.1.0 reproduce: wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # apt-get install sparse # sparse version: v0.6.4-39-gce1a6720-dirty # https://github.com/intel-lab-lkp/linux/commit/2696a8eeb2e224871e7c183660baea9d87f4fb71 git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Nitesh-Shetty/block-Introduce-queue-limits-for-copy-offload-support/20221123-145837 git checkout 2696a8eeb2e224871e7c183660baea9d87f4fb71 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=openrisc SHELL=/bin/bash drivers/nvme/target/ If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <lkp@intel.com> sparse warnings: (new ones prefixed by >>) >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: incorrect type in argument 1 (different base types) @@ expected unsigned int [usertype] val @@ got restricted __le16 [usertype] mssrl @@ drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: expected unsigned int [usertype] val drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: got restricted __le16 [usertype] mssrl >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: cast from restricted __le16 >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: cast from restricted __le16 >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: cast from restricted __le16 >> drivers/nvme/target/io-cmd-bdev.c:55:27: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:57:29: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: incorrect type in argument 1 (different base types) @@ expected unsigned int [usertype] val @@ got restricted __le16 [usertype] mssrl @@ drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: expected unsigned int [usertype] val drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: got restricted __le16 [usertype] mssrl drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: cast from restricted __le16 drivers/nvme/target/io-cmd-bdev.c:60:27: sparse: sparse: cast from restricted __le16 vim +55 drivers/nvme/target/io-cmd-bdev.c 12 13 void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id) 14 { 15 /* Logical blocks per physical block, 0's based. */ 16 const __le16 lpp0b = to0based(bdev_physical_block_size(bdev) / 17 bdev_logical_block_size(bdev)); 18 19 /* 20 * For NVMe 1.2 and later, bit 1 indicates that the fields NAWUN, 21 * NAWUPF, and NACWU are defined for this namespace and should be 22 * used by the host for this namespace instead of the AWUN, AWUPF, 23 * and ACWU fields in the Identify Controller data structure. If 24 * any of these fields are zero that means that the corresponding 25 * field from the identify controller data structure should be used. 26 */ 27 id->nsfeat |= 1 << 1; 28 id->nawun = lpp0b; 29 id->nawupf = lpp0b; 30 id->nacwu = lpp0b; 31 32 /* 33 * Bit 4 indicates that the fields NPWG, NPWA, NPDG, NPDA, and 34 * NOWS are defined for this namespace and should be used by 35 * the host for I/O optimization. 36 */ 37 id->nsfeat |= 1 << 4; 38 /* NPWG = Namespace Preferred Write Granularity. 0's based */ 39 id->npwg = lpp0b; 40 /* NPWA = Namespace Preferred Write Alignment. 0's based */ 41 id->npwa = id->npwg; 42 /* NPDG = Namespace Preferred Deallocate Granularity. 0's based */ 43 id->npdg = to0based(bdev_discard_granularity(bdev) / 44 bdev_logical_block_size(bdev)); 45 /* NPDG = Namespace Preferred Deallocate Alignment */ 46 id->npda = id->npdg; 47 /* NOWS = Namespace Optimal Write Size */ 48 id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev)); 49 50 /*Copy limits*/ 51 if (bdev_max_copy_sectors(bdev)) { 52 id->msrc = id->msrc; 53 id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) << 54 SECTOR_SHIFT) / bdev_logical_block_size(bdev)); > 55 id->mcl = cpu_to_le32(id->mssrl); 56 } else { 57 id->msrc = (u8)to0based(BIO_MAX_VECS - 1); 58 id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) / 59 bdev_logical_block_size(bdev)); 60 id->mcl = cpu_to_le32(id->mssrl); 61 } 62 } 63 -- 0-DAY CI Kernel Test Service https://01.org/lkp [-- Attachment #2: config --] [-- Type: text/plain, Size: 190021 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/openrisc 6.1.0-rc6 Kernel Configuration # CONFIG_CC_VERSION_TEXT="or1k-linux-gcc (GCC) 12.1.0" CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=120100 CONFIG_CLANG_VERSION=0 CONFIG_AS_IS_GNU=y CONFIG_AS_VERSION=23800 CONFIG_LD_IS_BFD=y CONFIG_LD_VERSION=23800 CONFIG_LLD_VERSION=0 CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y CONFIG_PAHOLE_VERSION=123 CONFIG_IRQ_WORK=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_COMPILE_TEST=y # CONFIG_WERROR is not set CONFIG_LOCALVERSION="" CONFIG_BUILD_SALT="" CONFIG_DEFAULT_INIT="" CONFIG_DEFAULT_HOSTNAME="(none)" # CONFIG_SYSVIPC is not set CONFIG_POSIX_MQUEUE=y CONFIG_WATCH_QUEUE=y # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_USELIB=y # CONFIG_AUDIT is not set # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_INJECTION=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_SIM=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_GENERIC_MSI_IRQ_DOMAIN=y CONFIG_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_DEBUGFS=y # end of IRQ subsystem CONFIG_GENERIC_IRQ_MULTI_HANDLER=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_TIME_KUNIT_TEST=y CONFIG_CONTEXT_TRACKING=y CONFIG_CONTEXT_TRACKING_IDLE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # end of Timers subsystem CONFIG_BPF=y # # BPF subsystem # CONFIG_BPF_SYSCALL=y CONFIG_BPF_UNPRIV_DEFAULT_OFF=y # end of BPF subsystem CONFIG_PREEMPT_NONE_BUILD=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_PREEMPT_COUNT=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_TASKSTATS=y # CONFIG_TASK_DELAY_ACCT is not set CONFIG_TASK_XACCT=y # CONFIG_TASK_IO_ACCOUNTING is not set # CONFIG_PSI is not set # end of CPU/Task time and stats accounting CONFIG_CPU_ISOLATION=y # # RCU Subsystem # CONFIG_TREE_RCU=y CONFIG_RCU_EXPERT=y CONFIG_SRCU=y CONFIG_TREE_SRCU=y CONFIG_TASKS_RCU_GENERIC=y # CONFIG_FORCE_TASKS_RCU is not set CONFIG_FORCE_TASKS_RUDE_RCU=y CONFIG_TASKS_RUDE_RCU=y CONFIG_FORCE_TASKS_TRACE_RCU=y CONFIG_TASKS_TRACE_RCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_NEED_SEGCBLIST=y CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_NOCB_CPU is not set CONFIG_TASKS_TRACE_RCU_READ_MB=y # end of RCU Subsystem CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_IKHEADERS is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 CONFIG_PRINTK_INDEX=y # # Scheduler features # # end of Scheduler features CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC12_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=y CONFIG_CGROUPS=y CONFIG_PAGE_COUNTER=y CONFIG_CGROUP_FAVOR_DYNMODS=y CONFIG_MEMCG=y CONFIG_MEMCG_KMEM=y # CONFIG_BLK_CGROUP is not set CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y # CONFIG_RT_GROUP_SCHED is not set # CONFIG_CGROUP_PIDS is not set # CONFIG_CGROUP_RDMA is not set CONFIG_CGROUP_FREEZER=y CONFIG_CPUSETS=y # CONFIG_PROC_PID_CPUSET is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CGROUP_CPUACCT is not set # CONFIG_CGROUP_BPF is not set CONFIG_CGROUP_MISC=y CONFIG_CGROUP_DEBUG=y CONFIG_SOCK_CGROUP_DATA=y # CONFIG_NAMESPACES is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_BOOT_CONFIG=y CONFIG_BOOT_CONFIG_EMBED=y CONFIG_BOOT_CONFIG_EMBED_FILE="" # CONFIG_INITRAMFS_PRESERVE_MTIME is not set CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_HAVE_UID16=y CONFIG_EXPERT=y CONFIG_UID16=y CONFIG_MULTIUSER=y CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y # CONFIG_BUG is not set # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_IO_URING=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_KCMP=y CONFIG_EMBEDDED=y CONFIG_PC104=y # # Kernel Performance Events And Counters # # end of Kernel Performance Events And Counters CONFIG_SYSTEM_DATA_VERIFICATION=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y # end of General setup CONFIG_OPENRISC=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_MMU=y CONFIG_GENERIC_HWEIGHT=y CONFIG_NO_IOPORT_MAP=y CONFIG_GENERIC_CSUM=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # # Processor type and features # CONFIG_OR1K_1200=y # CONFIG_DCACHE_WRITETHROUGH is not set CONFIG_OPENRISC_BUILTIN_DTB="" # # Class II Instructions # CONFIG_OPENRISC_HAVE_INST_FF1=y # CONFIG_OPENRISC_HAVE_INST_FL1 is not set # CONFIG_OPENRISC_HAVE_INST_MUL is not set CONFIG_OPENRISC_HAVE_INST_DIV=y CONFIG_OPENRISC_HAVE_INST_CMOV=y CONFIG_OPENRISC_HAVE_INST_ROR=y # CONFIG_OPENRISC_HAVE_INST_RORI is not set # CONFIG_OPENRISC_HAVE_INST_SEXT is not set # end of Class II Instructions CONFIG_NR_CPUS=2 CONFIG_SMP=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y CONFIG_OPENRISC_NO_SPR_SR_DSX=y CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y CONFIG_CMDLINE="" # # Debugging options # # CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION is not set # CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK is not set # end of Debugging options # end of Processor type and features # # General architecture-dependent options # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_DMA_SET_UNCACHED=y CONFIG_ARCH_HAS_DMA_CLEAR_UNCACHED=y CONFIG_ARCH_32BIT_OFF_T=y CONFIG_MMU_GATHER_NO_RANGE=y CONFIG_MMU_GATHER_MERGE_VMAS=y CONFIG_LTO_NONE=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_PGTABLE_LEVELS=2 CONFIG_PAGE_SIZE_LESS_THAN_64KB=y CONFIG_PAGE_SIZE_LESS_THAN_256KB=y CONFIG_COMPAT_32BIT_TIME=y # CONFIG_LOCK_EVENT_COUNTS is not set # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # end of GCOV-based kernel profiling # end of General architecture-dependent options CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_BLOCK_LEGACY_AUTOLOAD is not set CONFIG_BLK_ICQ=y # CONFIG_BLK_DEV_BSGLIB is not set # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLK_DEV_ZONED=y # CONFIG_BLK_WBT is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_BLK_SED_OPAL is not set CONFIG_BLK_INLINE_ENCRYPTION=y CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y CONFIG_ACORN_PARTITION_CUMANA=y CONFIG_ACORN_PARTITION_EESOX=y CONFIG_ACORN_PARTITION_ICS=y CONFIG_ACORN_PARTITION_ADFS=y # CONFIG_ACORN_PARTITION_POWERTEC is not set # CONFIG_ACORN_PARTITION_RISCIX is not set CONFIG_AIX_PARTITION=y CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set CONFIG_ATARI_PARTITION=y # CONFIG_MAC_PARTITION is not set # CONFIG_MSDOS_PARTITION is not set # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set # end of Partition Types CONFIG_BLK_MQ_PCI=y CONFIG_BLK_MQ_VIRTIO=y CONFIG_BLOCK_HOLDER_DEPRECATED=y CONFIG_BLK_MQ_STACKING=y # # IO Schedulers # CONFIG_MQ_IOSCHED_DEADLINE=y CONFIG_MQ_IOSCHED_KYBER=y CONFIG_IOSCHED_BFQ=y # end of IO Schedulers CONFIG_PADATA=y CONFIG_ASN1=y CONFIG_UNINLINE_SPIN_UNLOCK=y CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_FREEZER=y # # Executable file formats # # CONFIG_BINFMT_ELF is not set CONFIG_BINFMT_SCRIPT=y # CONFIG_BINFMT_MISC is not set # CONFIG_COREDUMP is not set # end of Executable file formats # # Memory Management options # # CONFIG_SWAP is not set # # SLAB allocator options # # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLAB_MERGE_DEFAULT=y # CONFIG_SLAB_FREELIST_RANDOM is not set CONFIG_SLAB_FREELIST_HARDENED=y CONFIG_SLUB_STATS=y CONFIG_SLUB_CPU_PARTIAL=y # end of SLAB allocator options CONFIG_SHUFFLE_PAGE_ALLOCATOR=y # CONFIG_COMPAT_BRK is not set CONFIG_FLATMEM=y CONFIG_MEMORY_ISOLATION=y CONFIG_EXCLUSIVE_SYSTEM_RAM=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 # CONFIG_PAGE_REPORTING is not set CONFIG_MIGRATION=y CONFIG_CONTIG_ALLOC=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_CMA=y # CONFIG_CMA_DEBUG is not set # CONFIG_CMA_DEBUGFS is not set CONFIG_CMA_SYSFS=y CONFIG_CMA_AREAS=7 CONFIG_PAGE_IDLE_FLAG=y CONFIG_IDLE_PAGE_TRACKING=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PERCPU_STATS=y CONFIG_GUP_TEST=y CONFIG_ANON_VMA_NAME=y CONFIG_USERFAULTFD=y CONFIG_LRU_GEN=y # CONFIG_LRU_GEN_ENABLED is not set CONFIG_LRU_GEN_STATS=y # # Data Access Monitoring # # CONFIG_DAMON is not set # end of Data Access Monitoring # end of Memory Management options CONFIG_NET=y CONFIG_NET_INGRESS=y CONFIG_NET_EGRESS=y CONFIG_SKB_EXTENSIONS=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_DIAG=y CONFIG_UNIX=y CONFIG_UNIX_SCM=y CONFIG_AF_UNIX_OOB=y CONFIG_UNIX_DIAG=y # CONFIG_TLS is not set CONFIG_XFRM=y CONFIG_XFRM_OFFLOAD=y CONFIG_XFRM_ALGO=y # CONFIG_XFRM_USER is not set CONFIG_XFRM_INTERFACE=y CONFIG_XFRM_SUB_POLICY=y # CONFIG_XFRM_MIGRATE is not set CONFIG_XFRM_STATISTICS=y CONFIG_XFRM_ESP=y CONFIG_XFRM_IPCOMP=y # CONFIG_NET_KEY is not set CONFIG_XDP_SOCKETS=y CONFIG_XDP_SOCKETS_DIAG=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_ROUTE_CLASSID=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=y CONFIG_NET_IPGRE_DEMUX=y CONFIG_NET_IP_TUNNEL=y CONFIG_NET_IPGRE=y # CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set # CONFIG_SYN_COOKIES is not set CONFIG_NET_IPVTI=y CONFIG_NET_UDP_TUNNEL=y CONFIG_NET_FOU=y CONFIG_NET_FOU_IP_TUNNELS=y # CONFIG_INET_AH is not set CONFIG_INET_ESP=y CONFIG_INET_ESP_OFFLOAD=y # CONFIG_INET_ESPINTCP is not set CONFIG_INET_IPCOMP=y CONFIG_INET_TABLE_PERTURB_ORDER=16 CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y # CONFIG_IPV6_ROUTER_PREF is not set CONFIG_IPV6_OPTIMISTIC_DAD=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set CONFIG_INET6_IPCOMP=y # CONFIG_IPV6_MIP6 is not set CONFIG_IPV6_ILA=y CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y CONFIG_IPV6_VTI=y CONFIG_IPV6_SIT=y # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=y # CONFIG_IPV6_GRE is not set CONFIG_IPV6_FOU=y CONFIG_IPV6_FOU_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y # CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MROUTE is not set CONFIG_IPV6_SEG6_LWTUNNEL=y CONFIG_IPV6_SEG6_HMAC=y CONFIG_IPV6_SEG6_BPF=y CONFIG_IPV6_RPL_LWTUNNEL=y CONFIG_IPV6_IOAM6_LWTUNNEL=y CONFIG_MPTCP=y # CONFIG_MPTCP_IPV6 is not set CONFIG_MPTCP_KUNIT_TEST=y CONFIG_NETWORK_SECMARK=y CONFIG_NET_PTP_CLASSIFY=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_ADVANCED is not set # # Core Netfilter Configuration # # CONFIG_NETFILTER_INGRESS is not set CONFIG_NETFILTER_EGRESS=y CONFIG_NETFILTER_SKIP_EGRESS=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_LOG=y # CONFIG_NF_CONNTRACK is not set CONFIG_NF_LOG_SYSLOG=y # CONFIG_NF_TABLES is not set CONFIG_NETFILTER_XTABLES=y # # Xtables combined modules # CONFIG_NETFILTER_XT_MARK=y # # Xtables targets # CONFIG_NETFILTER_XT_TARGET_LOG=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y # CONFIG_NETFILTER_XT_TARGET_SECMARK is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=y # # Xtables matches # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # end of Core Netfilter Configuration # CONFIG_IP_SET is not set CONFIG_IP_VS=y CONFIG_IP_VS_IPV6=y CONFIG_IP_VS_DEBUG=y CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # # CONFIG_IP_VS_PROTO_TCP is not set CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_AH_ESP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y # CONFIG_IP_VS_PROTO_SCTP is not set # # IPVS scheduler # CONFIG_IP_VS_RR=y # CONFIG_IP_VS_WRR is not set CONFIG_IP_VS_LC=y CONFIG_IP_VS_WLC=y # CONFIG_IP_VS_FO is not set CONFIG_IP_VS_OVF=y CONFIG_IP_VS_LBLC=y # CONFIG_IP_VS_LBLCR is not set CONFIG_IP_VS_DH=y CONFIG_IP_VS_SH=y # CONFIG_IP_VS_MH is not set CONFIG_IP_VS_SED=y CONFIG_IP_VS_NQ=y CONFIG_IP_VS_TWOS=y # # IPVS SH scheduler # CONFIG_IP_VS_SH_TAB_BITS=8 # # IPVS MH scheduler # CONFIG_IP_VS_MH_TAB_INDEX=12 # # IPVS application helper # # # IP: Netfilter Configuration # CONFIG_NF_SOCKET_IPV4=y CONFIG_NF_TPROXY_IPV4=y CONFIG_NF_DUP_IPV4=y CONFIG_NF_LOG_ARP=y CONFIG_NF_LOG_IPV4=y CONFIG_NF_REJECT_IPV4=y # CONFIG_IP_NF_IPTABLES is not set # end of IP: Netfilter Configuration # # IPv6: Netfilter Configuration # # CONFIG_NF_SOCKET_IPV6 is not set CONFIG_NF_TPROXY_IPV6=y CONFIG_NF_DUP_IPV6=y CONFIG_NF_REJECT_IPV6=y CONFIG_NF_LOG_IPV6=y CONFIG_IP6_NF_IPTABLES=y CONFIG_IP6_NF_MATCH_IPV6HEADER=y CONFIG_IP6_NF_FILTER=y # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=y CONFIG_IP6_NF_RAW=y # end of IPv6: Netfilter Configuration CONFIG_NF_DEFRAG_IPV6=y # CONFIG_BPFILTER is not set CONFIG_IP_DCCP=y # # DCCP CCIDs Configuration # # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=y CONFIG_IP_DCCP_CCID3_DEBUG=y CONFIG_IP_DCCP_TFRC_LIB=y CONFIG_IP_DCCP_TFRC_DEBUG=y # end of DCCP CCIDs Configuration # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set # end of DCCP Kernel Hacking CONFIG_IP_SCTP=y CONFIG_SCTP_DBG_OBJCNT=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE=y CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y # CONFIG_RDS is not set # CONFIG_TIPC is not set CONFIG_ATM=y # CONFIG_ATM_CLIP is not set CONFIG_ATM_LANE=y CONFIG_ATM_MPOA=y CONFIG_ATM_BR2684=y # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=y CONFIG_L2TP_DEBUGFS=y CONFIG_L2TP_V3=y # CONFIG_L2TP_IP is not set CONFIG_L2TP_ETH=y # CONFIG_BRIDGE is not set CONFIG_NET_DSA=y CONFIG_NET_DSA_TAG_AR9331=y CONFIG_NET_DSA_TAG_BRCM_COMMON=y CONFIG_NET_DSA_TAG_BRCM=y CONFIG_NET_DSA_TAG_BRCM_LEGACY=y CONFIG_NET_DSA_TAG_BRCM_PREPEND=y CONFIG_NET_DSA_TAG_HELLCREEK=y CONFIG_NET_DSA_TAG_GSWIP=y CONFIG_NET_DSA_TAG_DSA_COMMON=y CONFIG_NET_DSA_TAG_DSA=y CONFIG_NET_DSA_TAG_EDSA=y CONFIG_NET_DSA_TAG_MTK=y # CONFIG_NET_DSA_TAG_KSZ is not set # CONFIG_NET_DSA_TAG_OCELOT is not set # CONFIG_NET_DSA_TAG_OCELOT_8021Q is not set CONFIG_NET_DSA_TAG_QCA=y # CONFIG_NET_DSA_TAG_RTL4_A is not set CONFIG_NET_DSA_TAG_RTL8_4=y # CONFIG_NET_DSA_TAG_RZN1_A5PSW is not set CONFIG_NET_DSA_TAG_LAN9303=y # CONFIG_NET_DSA_TAG_SJA1105 is not set CONFIG_NET_DSA_TAG_TRAILER=y CONFIG_NET_DSA_TAG_XRS700X=y # CONFIG_VLAN_8021Q is not set CONFIG_LLC=y CONFIG_LLC2=y CONFIG_ATALK=y CONFIG_DEV_APPLETALK=y # CONFIG_IPDDP is not set # CONFIG_X25 is not set CONFIG_LAPB=y # CONFIG_PHONET is not set CONFIG_6LOWPAN=y # CONFIG_6LOWPAN_DEBUGFS is not set # CONFIG_6LOWPAN_NHC is not set CONFIG_IEEE802154=y CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y CONFIG_IEEE802154_SOCKET=y CONFIG_IEEE802154_6LOWPAN=y # CONFIG_MAC802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_ATM is not set CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFB=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y # CONFIG_NET_SCH_TBF is not set CONFIG_NET_SCH_CBS=y CONFIG_NET_SCH_ETF=y CONFIG_NET_SCH_TAPRIO=y # CONFIG_NET_SCH_GRED is not set CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y CONFIG_NET_SCH_DRR=y # CONFIG_NET_SCH_MQPRIO is not set CONFIG_NET_SCH_SKBPRIO=y # CONFIG_NET_SCH_CHOKE is not set CONFIG_NET_SCH_QFQ=y # CONFIG_NET_SCH_CODEL is not set CONFIG_NET_SCH_FQ_CODEL=y CONFIG_NET_SCH_CAKE=y CONFIG_NET_SCH_FQ=y CONFIG_NET_SCH_HHF=y CONFIG_NET_SCH_PIE=y CONFIG_NET_SCH_FQ_PIE=y CONFIG_NET_SCH_INGRESS=y CONFIG_NET_SCH_PLUG=y # CONFIG_NET_SCH_ETS is not set CONFIG_NET_SCH_DEFAULT=y CONFIG_DEFAULT_FQ=y # CONFIG_DEFAULT_FQ_CODEL is not set # CONFIG_DEFAULT_FQ_PIE is not set # CONFIG_DEFAULT_SFQ is not set # CONFIG_DEFAULT_PFIFO_FAST is not set CONFIG_DEFAULT_NET_SCH="fq" # # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set # CONFIG_NET_CLS_TCINDEX is not set CONFIG_NET_CLS_ROUTE4=y # CONFIG_NET_CLS_FW is not set # CONFIG_NET_CLS_U32 is not set CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y CONFIG_NET_CLS_FLOW=y CONFIG_NET_CLS_CGROUP=y CONFIG_NET_CLS_BPF=y CONFIG_NET_CLS_FLOWER=y # CONFIG_NET_CLS_MATCHALL is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=y # CONFIG_NET_EMATCH_NBYTE is not set # CONFIG_NET_EMATCH_U32 is not set CONFIG_NET_EMATCH_META=y # CONFIG_NET_EMATCH_TEXT is not set CONFIG_NET_EMATCH_CANID=y CONFIG_NET_EMATCH_IPT=y CONFIG_NET_CLS_ACT=y # CONFIG_NET_ACT_POLICE is not set CONFIG_NET_ACT_GACT=y CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=y # CONFIG_NET_ACT_SAMPLE is not set CONFIG_NET_ACT_IPT=y CONFIG_NET_ACT_NAT=y CONFIG_NET_ACT_PEDIT=y CONFIG_NET_ACT_SIMP=y # CONFIG_NET_ACT_SKBEDIT is not set # CONFIG_NET_ACT_CSUM is not set CONFIG_NET_ACT_MPLS=y CONFIG_NET_ACT_VLAN=y CONFIG_NET_ACT_BPF=y CONFIG_NET_ACT_SKBMOD=y CONFIG_NET_ACT_IFE=y CONFIG_NET_ACT_TUNNEL_KEY=y CONFIG_NET_ACT_GATE=y # CONFIG_NET_IFE_SKBMARK is not set CONFIG_NET_IFE_SKBPRIO=y CONFIG_NET_IFE_SKBTCINDEX=y CONFIG_NET_TC_SKB_EXT=y CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_DIAG is not set # CONFIG_MPLS is not set CONFIG_NET_NSH=y CONFIG_HSR=y CONFIG_NET_SWITCHDEV=y # CONFIG_NET_L3_MASTER_DEV is not set # CONFIG_QRTR is not set # CONFIG_NET_NCSI is not set # CONFIG_PCPU_DEV_REFCNT is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_SOCK_RX_QUEUE_MAPPING=y CONFIG_XPS=y CONFIG_CGROUP_NET_PRIO=y CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options # CONFIG_HAMRADIO is not set CONFIG_CAN=y # CONFIG_CAN_RAW is not set CONFIG_CAN_BCM=y # CONFIG_CAN_GW is not set CONFIG_CAN_J1939=y CONFIG_CAN_ISOTP=y CONFIG_BT=y # CONFIG_BT_BREDR is not set # CONFIG_BT_LE is not set # CONFIG_BT_LEDS is not set CONFIG_BT_MSFTEXT=y CONFIG_BT_AOSPEXT=y # CONFIG_BT_DEBUGFS is not set # CONFIG_BT_SELFTEST is not set # # Bluetooth device drivers # # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set CONFIG_BT_HCIBFUSB=y CONFIG_BT_HCIVHCI=y CONFIG_BT_MRVL=y # CONFIG_BT_MTKUART is not set # CONFIG_BT_QCOMSMD is not set CONFIG_BT_VIRTIO=y # end of Bluetooth device drivers # CONFIG_AF_RXRPC is not set CONFIG_AF_KCM=y CONFIG_STREAM_PARSER=y CONFIG_MCTP=y CONFIG_MCTP_TEST=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # # CFG80211 needs to be enabled for MAC80211 # CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 CONFIG_RFKILL=y CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_GPIO=y CONFIG_NET_9P=y # CONFIG_NET_9P_FD is not set CONFIG_NET_9P_VIRTIO=y CONFIG_NET_9P_DEBUG=y # CONFIG_CAIF is not set CONFIG_CEPH_LIB=y # CONFIG_CEPH_LIB_PRETTYDEBUG is not set # CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set CONFIG_NFC=y CONFIG_NFC_DIGITAL=y CONFIG_NFC_NCI=y CONFIG_NFC_NCI_SPI=y CONFIG_NFC_HCI=y # CONFIG_NFC_SHDLC is not set # # Near Field Communication (NFC) devices # # CONFIG_NFC_TRF7970A is not set CONFIG_NFC_SIM=y # CONFIG_NFC_PORT100 is not set CONFIG_NFC_VIRTUAL_NCI=y # CONFIG_NFC_FDP is not set CONFIG_NFC_PN533=y CONFIG_NFC_PN533_USB=y CONFIG_NFC_PN533_I2C=y CONFIG_NFC_PN532_UART=y CONFIG_NFC_MRVL=y CONFIG_NFC_MRVL_USB=y CONFIG_NFC_MRVL_I2C=y CONFIG_NFC_MRVL_SPI=y CONFIG_NFC_ST_NCI=y # CONFIG_NFC_ST_NCI_I2C is not set CONFIG_NFC_ST_NCI_SPI=y CONFIG_NFC_NXP_NCI=y CONFIG_NFC_NXP_NCI_I2C=y CONFIG_NFC_S3FWRN5=y CONFIG_NFC_S3FWRN5_I2C=y CONFIG_NFC_S3FWRN82_UART=y # CONFIG_NFC_ST95HF is not set # end of Near Field Communication (NFC) devices CONFIG_PSAMPLE=y CONFIG_NET_IFE=y CONFIG_LWTUNNEL=y CONFIG_LWTUNNEL_BPF=y CONFIG_DST_CACHE=y CONFIG_GRO_CELLS=y CONFIG_NET_SELFTESTS=y CONFIG_NET_SOCK_MSG=y CONFIG_NET_DEVLINK=y CONFIG_PAGE_POOL=y # CONFIG_PAGE_POOL_STATS is not set CONFIG_FAILOVER=y CONFIG_ETHTOOL_NETLINK=y # CONFIG_NETDEV_ADDR_LIST_TEST is not set # # Device Drivers # CONFIG_HAVE_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_DOMAINS_GENERIC=y CONFIG_PCIEPORTBUS=y # CONFIG_HOTPLUG_PCI_PCIE is not set # CONFIG_PCIEAER is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEFAULT is not set CONFIG_PCIEASPM_POWERSAVE=y # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_PCIE_PTM=y CONFIG_PCI_MSI=y CONFIG_PCI_MSI_IRQ_DOMAIN=y CONFIG_PCI_QUIRKS=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_PCI_ATS=y CONFIG_PCI_ECAM=y # CONFIG_PCI_IOV is not set CONFIG_PCI_PRI=y # CONFIG_PCI_PASID is not set # CONFIG_PCIE_BUS_TUNE_OFF is not set CONFIG_PCIE_BUS_DEFAULT=y # CONFIG_PCIE_BUS_SAFE is not set # CONFIG_PCIE_BUS_PERFORMANCE is not set # CONFIG_PCIE_BUS_PEER2PEER is not set # CONFIG_VGA_ARB is not set CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_CPCI=y # CONFIG_HOTPLUG_PCI_SHPC is not set # # PCI controller drivers # # CONFIG_PCI_AARDVARK is not set # CONFIG_PCIE_XILINX_NWL is not set CONFIG_PCI_FTPCI100=y # CONFIG_PCI_TEGRA is not set # CONFIG_PCIE_RCAR_HOST is not set CONFIG_PCI_HOST_COMMON=y CONFIG_PCI_HOST_GENERIC=y CONFIG_PCIE_XILINX=y # CONFIG_PCIE_XILINX_CPM is not set # CONFIG_PCI_XGENE is not set # CONFIG_PCI_V3_SEMI is not set # CONFIG_PCI_VERSATILE is not set # CONFIG_PCIE_ALTERA is not set # CONFIG_PCI_HOST_THUNDER_PEM is not set # CONFIG_PCI_HOST_THUNDER_ECAM is not set # CONFIG_PCIE_ROCKCHIP_HOST is not set # CONFIG_PCIE_MEDIATEK is not set # CONFIG_PCIE_MEDIATEK_GEN3 is not set # CONFIG_PCIE_BRCMSTB is not set # CONFIG_PCI_LOONGSON is not set CONFIG_PCIE_MICROCHIP_HOST=y # CONFIG_PCIE_APPLE is not set # CONFIG_PCIE_MT7621 is not set # # DesignWare PCI Core Support # CONFIG_PCIE_DW=y CONFIG_PCIE_DW_HOST=y # CONFIG_PCIE_DW_PLAT_HOST is not set # CONFIG_PCI_EXYNOS is not set # CONFIG_PCI_IMX6 is not set # CONFIG_PCIE_SPEAR13XX is not set # CONFIG_PCI_KEYSTONE_HOST is not set # CONFIG_PCI_LAYERSCAPE is not set # CONFIG_PCI_HISI is not set # CONFIG_PCIE_QCOM is not set # CONFIG_PCIE_ARMADA_8K is not set # CONFIG_PCIE_ARTPEC6_HOST is not set # CONFIG_PCIE_ROCKCHIP_DW_HOST is not set # CONFIG_PCIE_INTEL_GW is not set # CONFIG_PCIE_KEEMBAY_HOST is not set # CONFIG_PCIE_KIRIN is not set # CONFIG_PCIE_HISI_STB is not set CONFIG_PCI_MESON=y # CONFIG_PCIE_TEGRA194_HOST is not set # CONFIG_PCIE_VISCONTI_HOST is not set # CONFIG_PCIE_UNIPHIER is not set # CONFIG_PCIE_AL is not set # CONFIG_PCIE_FU740 is not set # end of DesignWare PCI Core Support # # Mobiveil PCIe Core Support # # CONFIG_PCIE_MOBIVEIL_PLAT is not set # CONFIG_PCIE_LAYERSCAPE_GEN4 is not set # end of Mobiveil PCIe Core Support # # Cadence PCIe controllers support # CONFIG_PCIE_CADENCE=y CONFIG_PCIE_CADENCE_HOST=y CONFIG_PCIE_CADENCE_PLAT=y CONFIG_PCIE_CADENCE_PLAT_HOST=y CONFIG_PCI_J721E=y CONFIG_PCI_J721E_HOST=y # end of Cadence PCIe controllers support # end of PCI controller drivers # # PCI Endpoint # # CONFIG_PCI_ENDPOINT is not set # end of PCI Endpoint # # PCI switch controller drivers # # CONFIG_PCI_SW_SWITCHTEC is not set # end of PCI switch controller drivers # CONFIG_CXL_BUS is not set # CONFIG_PCCARD is not set CONFIG_RAPIDIO=y CONFIG_RAPIDIO_TSI721=y CONFIG_RAPIDIO_DISC_TIMEOUT=30 # CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set # CONFIG_RAPIDIO_DEBUG is not set CONFIG_RAPIDIO_ENUM_BASIC=y CONFIG_RAPIDIO_CHMAN=y CONFIG_RAPIDIO_MPORT_CDEV=y # # RapidIO Switch drivers # # CONFIG_RAPIDIO_CPS_XX is not set CONFIG_RAPIDIO_CPS_GEN2=y CONFIG_RAPIDIO_RXS_GEN3=y # end of RapidIO Switch drivers # # Generic Driver Options # CONFIG_AUXILIARY_BUS=y # CONFIG_UEVENT_HELPER is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DEVTMPFS_SAFE=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # # Firmware loader # CONFIG_FW_LOADER=y CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_FW_LOADER_SYSFS=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_FW_LOADER_COMPRESS=y # CONFIG_FW_LOADER_COMPRESS_XZ is not set CONFIG_FW_LOADER_COMPRESS_ZSTD=y CONFIG_FW_UPLOAD=y # end of Firmware loader CONFIG_WANT_DEV_COREDUMP=y CONFIG_ALLOW_DEV_COREDUMP=y CONFIG_DEV_COREDUMP=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set CONFIG_PM_QOS_KUNIT_TEST=y # CONFIG_DRIVER_PE_KUNIT_TEST is not set CONFIG_GENERIC_CPU_DEVICES=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y CONFIG_REGMAP_SPMI=y CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_REGMAP_SCCB=y CONFIG_REGMAP_I3C=y CONFIG_REGMAP_SPI_AVMM=y CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set # end of Generic Driver Options # # Bus devices # # CONFIG_ARM_INTEGRATOR_LM is not set # CONFIG_BT1_APB is not set # CONFIG_BT1_AXI is not set CONFIG_MOXTET=y # CONFIG_HISILICON_LPC is not set # CONFIG_INTEL_IXP4XX_EB is not set # CONFIG_QCOM_EBI2 is not set CONFIG_MHI_BUS=y CONFIG_MHI_BUS_DEBUG=y CONFIG_MHI_BUS_PCI_GENERIC=y CONFIG_MHI_BUS_EP=y # end of Bus devices CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # # Firmware Drivers # # # ARM System Control and Management Interface Protocol # # CONFIG_ARM_SCMI_PROTOCOL is not set CONFIG_ARM_SCMI_POWER_DOMAIN=y # CONFIG_ARM_SCMI_POWER_CONTROL is not set # end of ARM System Control and Management Interface Protocol CONFIG_ARM_SCPI_POWER_DOMAIN=y # CONFIG_FIRMWARE_MEMMAP is not set # CONFIG_BCM47XX_NVRAM is not set CONFIG_CS_DSP=y # CONFIG_GOOGLE_FIRMWARE is not set # # Tegra firmware driver # # end of Tegra firmware driver # end of Firmware Drivers CONFIG_GNSS=y CONFIG_GNSS_SERIAL=y # CONFIG_GNSS_MTK_SERIAL is not set CONFIG_GNSS_SIRF_SERIAL=y CONFIG_GNSS_UBX_SERIAL=y # CONFIG_GNSS_USB is not set CONFIG_MTD=y # # Partition parsers # CONFIG_MTD_AR7_PARTS=y # CONFIG_MTD_BCM63XX_PARTS is not set # CONFIG_MTD_BRCM_U_BOOT is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set # CONFIG_MTD_PARSER_IMAGETAG is not set # CONFIG_MTD_PARSER_TRX is not set # CONFIG_MTD_SHARPSL_PARTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # end of Partition parsers # # User Modules And Translation Layers # CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # # Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK. # # CONFIG_FTL is not set # CONFIG_NFTL is not set CONFIG_INFTL=y CONFIG_RFD_FTL=y # CONFIG_SSFDC is not set CONFIG_SM_FTL=y CONFIG_MTD_OOPS=y CONFIG_MTD_PARTITIONED_MASTER=y # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y # CONFIG_MTD_ABSENT is not set # end of RAM/ROM/Flash chip drivers # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_SC520CDP is not set # CONFIG_MTD_NETSC520 is not set # CONFIG_MTD_TS5500 is not set CONFIG_MTD_PCI=y CONFIG_MTD_INTEL_VR_NOR=y CONFIG_MTD_PLATRAM=y # end of Mapping drivers for chip access # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set CONFIG_MTD_DATAFLASH=y CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y CONFIG_MTD_DATAFLASH_OTP=y # CONFIG_MTD_MCHP23K256 is not set CONFIG_MTD_MCHP48L640=y CONFIG_MTD_SPEAR_SMI=y CONFIG_MTD_SST25L=y CONFIG_MTD_SLRAM=y CONFIG_MTD_PHRAM=y CONFIG_MTD_MTDRAM=y CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTDRAM_ERASE_SIZE=128 CONFIG_MTD_BLOCK2MTD=y # # Disk-On-Chip Device Drivers # CONFIG_MTD_DOCG3=y CONFIG_BCH_CONST_M=14 CONFIG_BCH_CONST_T=4 # end of Self-contained MTD device drivers # # NAND # CONFIG_MTD_NAND_CORE=y # CONFIG_MTD_ONENAND is not set CONFIG_MTD_RAW_NAND=y # # Raw/parallel NAND flash controllers # CONFIG_MTD_NAND_DENALI=y CONFIG_MTD_NAND_DENALI_PCI=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_AMS_DELTA=y # CONFIG_MTD_NAND_SHARPSL is not set CONFIG_MTD_NAND_CAFE=y # CONFIG_MTD_NAND_ATMEL is not set # CONFIG_MTD_NAND_MARVELL is not set # CONFIG_MTD_NAND_SLC_LPC32XX is not set # CONFIG_MTD_NAND_MLC_LPC32XX is not set # CONFIG_MTD_NAND_BRCMNAND is not set # CONFIG_MTD_NAND_OXNAS is not set # CONFIG_MTD_NAND_FSL_IFC is not set # CONFIG_MTD_NAND_VF610_NFC is not set # CONFIG_MTD_NAND_MXC is not set # CONFIG_MTD_NAND_SH_FLCTL is not set # CONFIG_MTD_NAND_DAVINCI is not set # CONFIG_MTD_NAND_TXX9NDFMC is not set # CONFIG_MTD_NAND_FSMC is not set # CONFIG_MTD_NAND_SUNXI is not set # CONFIG_MTD_NAND_HISI504 is not set # CONFIG_MTD_NAND_QCOM is not set CONFIG_MTD_NAND_MXIC=y # CONFIG_MTD_NAND_TEGRA is not set # CONFIG_MTD_NAND_STM32_FMC2 is not set # CONFIG_MTD_NAND_MESON is not set # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_CADENCE=y CONFIG_MTD_NAND_ARASAN=y CONFIG_MTD_NAND_INTEL_LGM=y # CONFIG_MTD_NAND_RENESAS is not set # # Misc # CONFIG_MTD_SM_COMMON=y CONFIG_MTD_NAND_NANDSIM=y CONFIG_MTD_NAND_RICOH=y CONFIG_MTD_NAND_DISKONCHIP=y # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y # CONFIG_MTD_SPI_NAND is not set # # ECC engine support # CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND_ECC_SW_HAMMING=y # CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set CONFIG_MTD_NAND_ECC_SW_BCH=y CONFIG_MTD_NAND_ECC_MXIC=y # CONFIG_MTD_NAND_ECC_MEDIATEK is not set # end of ECC engine support # end of NAND # # LPDDR & LPDDR2 PCM memory drivers # CONFIG_MTD_LPDDR=y CONFIG_MTD_QINFO_PROBE=y # end of LPDDR & LPDDR2 PCM memory drivers CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y # CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y # CONFIG_MTD_SPI_NOR_SWP_KEEP is not set # CONFIG_SPI_HISI_SFC is not set # CONFIG_SPI_NXP_SPIFI is not set CONFIG_MTD_UBI=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_FASTMAP=y # CONFIG_MTD_UBI_GLUEBI is not set CONFIG_MTD_UBI_BLOCK=y CONFIG_MTD_HYPERBUS=y # CONFIG_HBMC_AM654 is not set CONFIG_DTC=y CONFIG_OF=y # CONFIG_OF_UNITTEST is not set # CONFIG_OF_ALL_DTBS is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_KOBJ=y CONFIG_OF_DYNAMIC=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_RESERVED_MEM=y # CONFIG_OF_OVERLAY is not set CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set CONFIG_BLK_DEV=y CONFIG_BLK_DEV_NULL_BLK=y CONFIG_PARIDE=y # # Parallel IDE high-level drivers # # CONFIG_PARIDE_PD is not set # CONFIG_PARIDE_PCD is not set # CONFIG_PARIDE_PF is not set # CONFIG_PARIDE_PT is not set # CONFIG_PARIDE_PG is not set # # Parallel IDE protocol modules # # CONFIG_PARIDE_ATEN is not set CONFIG_PARIDE_BPCK=y CONFIG_PARIDE_BPCK6=y CONFIG_PARIDE_COMM=y CONFIG_PARIDE_DSTR=y CONFIG_PARIDE_FIT2=y # CONFIG_PARIDE_FIT3 is not set CONFIG_PARIDE_EPAT=y # CONFIG_PARIDE_EPATC8 is not set CONFIG_PARIDE_EPIA=y # CONFIG_PARIDE_FRIQ is not set # CONFIG_PARIDE_FRPW is not set # CONFIG_PARIDE_KBIC is not set CONFIG_PARIDE_KTTI=y # CONFIG_PARIDE_ON20 is not set # CONFIG_PARIDE_ON26 is not set # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set # CONFIG_ZRAM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLK_DEV_DRBD=y # CONFIG_DRBD_FAULT_INJECTION is not set CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_ATA_OVER_ETH=y CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_RBD=y # CONFIG_BLK_DEV_UBLK is not set # # NVME Support # CONFIG_NVME_COMMON=y CONFIG_NVME_CORE=y CONFIG_BLK_DEV_NVME=y # CONFIG_NVME_MULTIPATH is not set # CONFIG_NVME_VERBOSE_ERRORS is not set CONFIG_NVME_FABRICS=y # CONFIG_NVME_FC is not set CONFIG_NVME_TCP=y # CONFIG_NVME_AUTH is not set CONFIG_NVME_TARGET=y CONFIG_NVME_TARGET_PASSTHRU=y # CONFIG_NVME_TARGET_LOOP is not set # CONFIG_NVME_TARGET_FC is not set CONFIG_NVME_TARGET_TCP=y CONFIG_NVME_TARGET_AUTH=y # end of NVME Support # # Misc devices # # CONFIG_AD525X_DPOT is not set CONFIG_DUMMY_IRQ=y # CONFIG_PHANTOM is not set CONFIG_TIFM_CORE=y CONFIG_TIFM_7XX1=y CONFIG_ICS932S401=y # CONFIG_ATMEL_SSC is not set CONFIG_ENCLOSURE_SERVICES=y # CONFIG_GEHC_ACHC is not set CONFIG_HI6421V600_IRQ=y CONFIG_HP_ILO=y # CONFIG_QCOM_COINCELL is not set CONFIG_APDS9802ALS=y CONFIG_ISL29003=y # CONFIG_ISL29020 is not set CONFIG_SENSORS_TSL2550=y CONFIG_SENSORS_BH1770=y CONFIG_SENSORS_APDS990X=y # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_PCH_PHUB is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set CONFIG_DW_XDATA_PCIE=y CONFIG_PCI_ENDPOINT_TEST=y # CONFIG_XILINX_SDFEC is not set CONFIG_MISC_RTSX=y CONFIG_HISI_HIKEY_USB=y CONFIG_OPEN_DICE=y CONFIG_VCPU_STALL_DETECTOR=y CONFIG_C2PORT=y # # EEPROM support # CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_EEPROM_LEGACY=y CONFIG_EEPROM_MAX6875=y CONFIG_EEPROM_93CX6=y CONFIG_EEPROM_93XX46=y CONFIG_EEPROM_IDT_89HPESX=y CONFIG_EEPROM_EE1004=y # end of EEPROM support CONFIG_CB710_CORE=y CONFIG_CB710_DEBUG=y CONFIG_CB710_DEBUG_ASSUMPTIONS=y # # Texas Instruments shared transport line discipline # # end of Texas Instruments shared transport line discipline # CONFIG_ALTERA_STAPL is not set CONFIG_ECHO=y CONFIG_BCM_VK=y CONFIG_MISC_ALCOR_PCI=y CONFIG_MISC_RTSX_PCI=y CONFIG_MISC_RTSX_USB=y # CONFIG_HABANA_AI is not set CONFIG_UACCE=y # CONFIG_PVPANIC is not set # CONFIG_GP_PCI1XXXX is not set # end of Misc devices # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=y CONFIG_SCSI_COMMON=y # CONFIG_SCSI is not set # end of SCSI device support # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=y CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y CONFIG_DM_PERSISTENT_DATA=y # CONFIG_DM_UNSTRIPED is not set # CONFIG_DM_CRYPT is not set CONFIG_DM_SNAPSHOT=y # CONFIG_DM_THIN_PROVISIONING is not set # CONFIG_DM_CACHE is not set # CONFIG_DM_WRITECACHE is not set CONFIG_DM_EBS=y # CONFIG_DM_ERA is not set CONFIG_DM_CLONE=y CONFIG_DM_MIRROR=y CONFIG_DM_LOG_USERSPACE=y # CONFIG_DM_RAID is not set CONFIG_DM_ZERO=y CONFIG_DM_MULTIPATH=y CONFIG_DM_MULTIPATH_QL=y CONFIG_DM_MULTIPATH_ST=y CONFIG_DM_MULTIPATH_HST=y CONFIG_DM_MULTIPATH_IOA=y CONFIG_DM_DELAY=y CONFIG_DM_DUST=y # CONFIG_DM_INIT is not set CONFIG_DM_UEVENT=y # CONFIG_DM_FLAKEY is not set CONFIG_DM_VERITY=y CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y CONFIG_DM_VERITY_FEC=y CONFIG_DM_SWITCH=y CONFIG_DM_LOG_WRITES=y # CONFIG_DM_INTEGRITY is not set CONFIG_DM_ZONED=y CONFIG_TARGET_CORE=y # CONFIG_TCM_IBLOCK is not set CONFIG_TCM_FILEIO=y CONFIG_ISCSI_TARGET=y CONFIG_SBP_TARGET=y CONFIG_FUSION=y CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=y CONFIG_FIREWIRE_OHCI=y CONFIG_FIREWIRE_NET=y CONFIG_FIREWIRE_NOSY=y # end of IEEE 1394 (FireWire) support CONFIG_NETDEVICES=y CONFIG_MII=y # CONFIG_NET_CORE is not set CONFIG_ARCNET=y CONFIG_ARCNET_1201=y CONFIG_ARCNET_1051=y # CONFIG_ARCNET_RAW is not set CONFIG_ARCNET_CAP=y CONFIG_ARCNET_COM90xx=y # CONFIG_ARCNET_COM90xxIO is not set CONFIG_ARCNET_RIM_I=y # CONFIG_ARCNET_COM20020 is not set # CONFIG_ATM_DRIVERS is not set # # Distributed Switch Architecture drivers # CONFIG_B53=y CONFIG_B53_SPI_DRIVER=y # CONFIG_B53_MDIO_DRIVER is not set CONFIG_B53_MMAP_DRIVER=y CONFIG_B53_SRAB_DRIVER=y # CONFIG_B53_SERDES is not set CONFIG_NET_DSA_BCM_SF2=y CONFIG_NET_DSA_LOOP=y # CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK is not set CONFIG_NET_DSA_LANTIQ_GSWIP=y CONFIG_NET_DSA_MT7530=y CONFIG_NET_DSA_MV88E6060=y # CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON is not set # CONFIG_NET_DSA_MV88E6XXX is not set CONFIG_NET_DSA_AR9331=y CONFIG_NET_DSA_QCA8K=y # CONFIG_NET_DSA_SJA1105 is not set CONFIG_NET_DSA_XRS700X=y CONFIG_NET_DSA_XRS700X_I2C=y # CONFIG_NET_DSA_XRS700X_MDIO is not set # CONFIG_NET_DSA_REALTEK is not set CONFIG_NET_DSA_SMSC_LAN9303=y # CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y CONFIG_NET_DSA_VITESSE_VSC73XX=y # CONFIG_NET_DSA_VITESSE_VSC73XX_SPI is not set CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=y # end of Distributed Switch Architecture drivers # CONFIG_ETHERNET is not set CONFIG_FDDI=y CONFIG_DEFXX=y # CONFIG_SKFP is not set # CONFIG_HIPPI is not set CONFIG_PHYLINK=y CONFIG_PHYLIB=y CONFIG_SWPHY=y # CONFIG_LED_TRIGGER_PHY is not set CONFIG_FIXED_PHY=y CONFIG_SFP=y # # MII PHY device drivers # # CONFIG_AMD_PHY is not set # CONFIG_MESON_GXL_PHY is not set # CONFIG_ADIN_PHY is not set # CONFIG_ADIN1100_PHY is not set CONFIG_AQUANTIA_PHY=y CONFIG_AX88796B_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_BCM54140_PHY=y # CONFIG_BCM63XX_PHY is not set CONFIG_BCM7XXX_PHY=y CONFIG_BCM84881_PHY=y # CONFIG_BCM87XX_PHY is not set CONFIG_BCM_NET_PHYLIB=y CONFIG_CICADA_PHY=y CONFIG_CORTINA_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_LXT_PHY=y CONFIG_INTEL_XWAY_PHY=y # CONFIG_LSI_ET1011C_PHY is not set CONFIG_MARVELL_PHY=y CONFIG_MARVELL_10G_PHY=y CONFIG_MARVELL_88X2222_PHY=y CONFIG_MAXLINEAR_GPHY=y CONFIG_MEDIATEK_GE_PHY=y # CONFIG_MICREL_PHY is not set CONFIG_MICROCHIP_PHY=y # CONFIG_MICROCHIP_T1_PHY is not set # CONFIG_MICROSEMI_PHY is not set # CONFIG_MOTORCOMM_PHY is not set CONFIG_NATIONAL_PHY=y CONFIG_NXP_C45_TJA11XX_PHY=y CONFIG_AT803X_PHY=y CONFIG_QSEMI_PHY=y CONFIG_REALTEK_PHY=y # CONFIG_RENESAS_PHY is not set # CONFIG_ROCKCHIP_PHY is not set # CONFIG_SMSC_PHY is not set CONFIG_STE10XP=y # CONFIG_TERANETICS_PHY is not set CONFIG_DP83822_PHY=y CONFIG_DP83TC811_PHY=y CONFIG_DP83848_PHY=y CONFIG_DP83867_PHY=y CONFIG_DP83869_PHY=y CONFIG_DP83TD510_PHY=y CONFIG_VITESSE_PHY=y # CONFIG_XILINX_GMII2RGMII is not set CONFIG_MICREL_KS8995MA=y CONFIG_PSE_CONTROLLER=y CONFIG_PSE_REGULATOR=y CONFIG_CAN_DEV=y CONFIG_CAN_VCAN=y CONFIG_CAN_VXCAN=y # CONFIG_CAN_NETLINK is not set CONFIG_CAN_DEBUG_DEVICES=y # # MCTP Device Drivers # # CONFIG_MCTP_TRANSPORT_I2C is not set # end of MCTP Device Drivers CONFIG_MDIO_DEVICE=y CONFIG_MDIO_BUS=y CONFIG_FWNODE_MDIO=y CONFIG_OF_MDIO=y CONFIG_MDIO_DEVRES=y # CONFIG_MDIO_SUN4I is not set # CONFIG_MDIO_XGENE is not set # CONFIG_MDIO_ASPEED is not set CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_BCM_IPROC is not set CONFIG_MDIO_BCM_UNIMAC=y # CONFIG_MDIO_GPIO is not set CONFIG_MDIO_HISI_FEMAC=y CONFIG_MDIO_I2C=y CONFIG_MDIO_MVUSB=y CONFIG_MDIO_MSCC_MIIM=y # CONFIG_MDIO_MOXART is not set # CONFIG_MDIO_OCTEON is not set # CONFIG_MDIO_IPQ4019 is not set CONFIG_MDIO_IPQ8064=y # # MDIO Multiplexers # CONFIG_MDIO_BUS_MUX=y # CONFIG_MDIO_BUS_MUX_MESON_G12A is not set # CONFIG_MDIO_BUS_MUX_BCM6368 is not set # CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set CONFIG_MDIO_BUS_MUX_GPIO=y CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y # CONFIG_MDIO_BUS_MUX_MMIOREG is not set # # PCS device drivers # # CONFIG_PCS_RZN1_MIIC is not set # end of PCS device drivers CONFIG_PLIP=y CONFIG_PPP=y CONFIG_PPP_BSDCOMP=y CONFIG_PPP_DEFLATE=y # CONFIG_PPP_FILTER is not set # CONFIG_PPP_MPPE is not set CONFIG_PPP_MULTILINK=y # CONFIG_PPPOATM is not set CONFIG_PPPOE=y CONFIG_PPTP=y CONFIG_PPPOL2TP=y CONFIG_SLHC=y CONFIG_USB_NET_DRIVERS=y CONFIG_USB_CATC=y CONFIG_USB_KAWETH=y CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8150=y CONFIG_USB_RTL8152=y CONFIG_USB_LAN78XX=y # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set # CONFIG_WLAN is not set # CONFIG_WAN is not set # CONFIG_IEEE802154_DRIVERS is not set # # Wireless WAN # CONFIG_WWAN=y CONFIG_WWAN_DEBUGFS=y # CONFIG_WWAN_HWSIM is not set # CONFIG_MHI_WWAN_CTRL is not set CONFIG_MHI_WWAN_MBIM=y # CONFIG_QCOM_BAM_DMUX is not set CONFIG_IOSM=y CONFIG_MTK_T7XX=y # end of Wireless WAN CONFIG_VMXNET3=y CONFIG_USB4_NET=y # CONFIG_NETDEVSIM is not set # CONFIG_NET_FAILOVER is not set CONFIG_ISDN=y CONFIG_ISDN_CAPI=y CONFIG_MISDN=y CONFIG_MISDN_DSP=y CONFIG_MISDN_L1OIP=y # # mISDN hardware drivers # CONFIG_MISDN_HFCPCI=y CONFIG_MISDN_HFCMULTI=y CONFIG_MISDN_HFCUSB=y CONFIG_MISDN_AVMFRITZ=y CONFIG_MISDN_SPEEDFAX=y # CONFIG_MISDN_INFINEON is not set # CONFIG_MISDN_W6692 is not set CONFIG_MISDN_IPAC=y CONFIG_MISDN_ISAR=y # # Input device support # # CONFIG_INPUT is not set # # Hardware I/O ports # # CONFIG_SERIO is not set CONFIG_GAMEPORT=y CONFIG_GAMEPORT_NS558=y # CONFIG_GAMEPORT_L4 is not set CONFIG_GAMEPORT_EMU10K1=y CONFIG_GAMEPORT_FM801=y # end of Hardware I/O ports # end of Input device support # # Character devices # # CONFIG_TTY is not set CONFIG_SERIAL_DEV_BUS=y CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=y CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y # CONFIG_IPMI_PANIC_STRING is not set # CONFIG_IPMI_DEVICE_INTERFACE is not set # CONFIG_IPMI_SI is not set # CONFIG_IPMI_SSIF is not set CONFIG_IPMI_IPMB=y # CONFIG_IPMI_WATCHDOG is not set CONFIG_IPMI_POWEROFF=y # CONFIG_ASPEED_KCS_IPMI_BMC is not set # CONFIG_NPCM7XX_KCS_IPMI_BMC is not set # CONFIG_ASPEED_BT_IPMI_BMC is not set # CONFIG_IPMB_DEVICE_INTERFACE is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=y CONFIG_HW_RANDOM_ATMEL=y # CONFIG_HW_RANDOM_BA431 is not set CONFIG_HW_RANDOM_BCM2835=y CONFIG_HW_RANDOM_IPROC_RNG200=y CONFIG_HW_RANDOM_IXP4XX=y CONFIG_HW_RANDOM_OMAP=y CONFIG_HW_RANDOM_OMAP3_ROM=y CONFIG_HW_RANDOM_VIRTIO=y CONFIG_HW_RANDOM_IMX_RNGC=y CONFIG_HW_RANDOM_NOMADIK=y CONFIG_HW_RANDOM_STM32=y CONFIG_HW_RANDOM_MESON=y CONFIG_HW_RANDOM_MTK=y CONFIG_HW_RANDOM_EXYNOS=y CONFIG_HW_RANDOM_NPCM=y CONFIG_HW_RANDOM_KEYSTONE=y CONFIG_HW_RANDOM_CCTRNG=y CONFIG_HW_RANDOM_XIPHERA=y CONFIG_APPLICOM=y # CONFIG_DEVMEM is not set CONFIG_DEVPORT=y CONFIG_TCG_TPM=y CONFIG_HW_RANDOM_TPM=y CONFIG_TCG_TIS_CORE=y CONFIG_TCG_TIS=y CONFIG_TCG_TIS_SPI=y CONFIG_TCG_TIS_SPI_CR50=y # CONFIG_TCG_TIS_I2C is not set # CONFIG_TCG_TIS_SYNQUACER is not set # CONFIG_TCG_TIS_I2C_CR50 is not set CONFIG_TCG_TIS_I2C_ATMEL=y CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_TCG_TIS_I2C_NUVOTON=y CONFIG_TCG_VTPM_PROXY=y CONFIG_TCG_TIS_ST33ZP24=y CONFIG_TCG_TIS_ST33ZP24_I2C=y CONFIG_TCG_TIS_ST33ZP24_SPI=y CONFIG_XILLYBUS_CLASS=y CONFIG_XILLYBUS=y CONFIG_XILLYBUS_PCIE=y CONFIG_XILLYBUS_OF=y # CONFIG_XILLYUSB is not set CONFIG_RANDOM_TRUST_CPU=y CONFIG_RANDOM_TRUST_BOOTLOADER=y # end of Character devices # # I2C support # CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_MUX=y # # Multiplexer I2C Chip support # CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_I2C_MUX_GPIO=y CONFIG_I2C_MUX_GPMUX=y # CONFIG_I2C_MUX_LTC4306 is not set CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_MUX_REG=y CONFIG_I2C_DEMUX_PINCTRL=y CONFIG_I2C_MUX_MLXCPLD=y # end of Multiplexer I2C Chip support # CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_SMBUS=y # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # end of I2C Algorithms # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set CONFIG_I2C_ALI1563=y CONFIG_I2C_ALI15X3=y # CONFIG_I2C_AMD756 is not set CONFIG_I2C_AMD8111=y # CONFIG_I2C_HIX5HD2 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set CONFIG_I2C_PIIX4=y CONFIG_I2C_NFORCE2=y # CONFIG_I2C_NVIDIA_GPU is not set # CONFIG_I2C_SIS5595 is not set CONFIG_I2C_SIS630=y CONFIG_I2C_SIS96X=y CONFIG_I2C_VIA=y # CONFIG_I2C_VIAPRO is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_ALTERA is not set # CONFIG_I2C_ASPEED is not set # CONFIG_I2C_AT91 is not set # CONFIG_I2C_AXXIA is not set # CONFIG_I2C_BCM2835 is not set # CONFIG_I2C_BCM_IPROC is not set # CONFIG_I2C_BCM_KONA is not set CONFIG_I2C_BRCMSTB=y # CONFIG_I2C_CADENCE is not set CONFIG_I2C_CBUS_GPIO=y # CONFIG_I2C_DAVINCI is not set CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_SLAVE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_DIGICOLOR is not set # CONFIG_I2C_EG20T is not set # CONFIG_I2C_EMEV2 is not set # CONFIG_I2C_EXYNOS5 is not set CONFIG_I2C_GPIO=y CONFIG_I2C_GPIO_FAULT_INJECTOR=y # CONFIG_I2C_HIGHLANDER is not set # CONFIG_I2C_HISI is not set # CONFIG_I2C_IMG is not set # CONFIG_I2C_IMX is not set # CONFIG_I2C_IMX_LPI2C is not set # CONFIG_I2C_IOP3XX is not set # CONFIG_I2C_JZ4780 is not set # CONFIG_I2C_KEMPLD is not set # CONFIG_I2C_LPC2K is not set # CONFIG_I2C_MESON is not set # CONFIG_I2C_MICROCHIP_CORE is not set # CONFIG_I2C_MT65XX is not set # CONFIG_I2C_MT7621 is not set # CONFIG_I2C_MV64XXX is not set # CONFIG_I2C_MXS is not set # CONFIG_I2C_NPCM is not set CONFIG_I2C_OCORES=y # CONFIG_I2C_OMAP is not set # CONFIG_I2C_OWL is not set # CONFIG_I2C_APPLE is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PNX is not set # CONFIG_I2C_PXA is not set # CONFIG_I2C_QCOM_CCI is not set # CONFIG_I2C_QUP is not set # CONFIG_I2C_RIIC is not set CONFIG_I2C_RK3X=y # CONFIG_I2C_RZV2M is not set # CONFIG_I2C_S3C2410 is not set # CONFIG_I2C_SH_MOBILE is not set CONFIG_I2C_SIMTEC=y # CONFIG_I2C_SPRD is not set # CONFIG_I2C_ST is not set # CONFIG_I2C_STM32F4 is not set # CONFIG_I2C_STM32F7 is not set # CONFIG_I2C_SUN6I_P2WI is not set # CONFIG_I2C_SYNQUACER is not set # CONFIG_I2C_TEGRA_BPMP is not set # CONFIG_I2C_UNIPHIER is not set # CONFIG_I2C_UNIPHIER_F is not set # CONFIG_I2C_VERSATILE is not set # CONFIG_I2C_WMT is not set # CONFIG_I2C_XILINX is not set # CONFIG_I2C_XLP9XX is not set # CONFIG_I2C_RCAR is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_DIOLAN_U2C=y # CONFIG_I2C_DLN2 is not set CONFIG_I2C_CP2615=y CONFIG_I2C_PARPORT=y CONFIG_I2C_PCI1XXXX=y CONFIG_I2C_ROBOTFUZZ_OSIF=y CONFIG_I2C_TINY_USB=y CONFIG_I2C_VIPERBOARD=y # # Other I2C/SMBus bus drivers # # CONFIG_I2C_MLXCPLD is not set CONFIG_I2C_FSI=y CONFIG_I2C_VIRTIO=y # end of I2C Hardware Bus support CONFIG_I2C_SLAVE=y CONFIG_I2C_SLAVE_EEPROM=y # CONFIG_I2C_SLAVE_TESTUNIT is not set # CONFIG_I2C_DEBUG_CORE is not set CONFIG_I2C_DEBUG_ALGO=y # CONFIG_I2C_DEBUG_BUS is not set # end of I2C support CONFIG_I3C=y # CONFIG_CDNS_I3C_MASTER is not set CONFIG_DW_I3C_MASTER=y CONFIG_SVC_I3C_MASTER=y CONFIG_MIPI_I3C_HCI=y CONFIG_SPI=y CONFIG_SPI_DEBUG=y CONFIG_SPI_MASTER=y CONFIG_SPI_MEM=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set CONFIG_SPI_ALTERA_CORE=y CONFIG_SPI_ALTERA_DFL=y # CONFIG_SPI_AR934X is not set # CONFIG_SPI_ATH79 is not set # CONFIG_SPI_ARMADA_3700 is not set # CONFIG_SPI_ASPEED_SMC is not set # CONFIG_SPI_ATMEL is not set # CONFIG_SPI_ATMEL_QUADSPI is not set CONFIG_SPI_AXI_SPI_ENGINE=y # CONFIG_SPI_BCM2835 is not set # CONFIG_SPI_BCM2835AUX is not set # CONFIG_SPI_BCM63XX is not set # CONFIG_SPI_BCM63XX_HSSPI is not set # CONFIG_SPI_BCM_QSPI is not set CONFIG_SPI_BITBANG=y CONFIG_SPI_BUTTERFLY=y CONFIG_SPI_CADENCE=y # CONFIG_SPI_CADENCE_QUADSPI is not set CONFIG_SPI_CADENCE_XSPI=y # CONFIG_SPI_CLPS711X is not set CONFIG_SPI_DESIGNWARE=y CONFIG_SPI_DW_DMA=y CONFIG_SPI_DW_PCI=y # CONFIG_SPI_DW_MMIO is not set # CONFIG_SPI_DW_BT1 is not set CONFIG_SPI_DLN2=y # CONFIG_SPI_EP93XX is not set CONFIG_SPI_FSI=y # CONFIG_SPI_FSL_LPSPI is not set # CONFIG_SPI_FSL_QUADSPI is not set # CONFIG_SPI_GXP is not set # CONFIG_SPI_HISI_KUNPENG is not set # CONFIG_SPI_HISI_SFC_V3XX is not set CONFIG_SPI_NXP_FLEXSPI=y # CONFIG_SPI_GPIO is not set # CONFIG_SPI_IMG_SPFI is not set # CONFIG_SPI_IMX is not set # CONFIG_SPI_INGENIC is not set # CONFIG_SPI_INTEL_PCI is not set # CONFIG_SPI_INTEL_PLATFORM is not set # CONFIG_SPI_JCORE is not set CONFIG_SPI_LM70_LLP=y # CONFIG_SPI_LP8841_RTC is not set # CONFIG_SPI_FSL_SPI is not set # CONFIG_SPI_FSL_DSPI is not set # CONFIG_SPI_MESON_SPICC is not set # CONFIG_SPI_MESON_SPIFC is not set CONFIG_SPI_MICROCHIP_CORE=y CONFIG_SPI_MICROCHIP_CORE_QSPI=y # CONFIG_SPI_MT65XX is not set # CONFIG_SPI_MT7621 is not set # CONFIG_SPI_MTK_NOR is not set # CONFIG_SPI_NPCM_FIU is not set # CONFIG_SPI_NPCM_PSPI is not set # CONFIG_SPI_LANTIQ_SSC is not set CONFIG_SPI_OC_TINY=y # CONFIG_SPI_OMAP24XX is not set # CONFIG_SPI_TI_QSPI is not set # CONFIG_SPI_OMAP_100K is not set # CONFIG_SPI_ORION is not set # CONFIG_SPI_PIC32 is not set # CONFIG_SPI_PIC32_SQI is not set CONFIG_SPI_PXA2XX=y CONFIG_SPI_PXA2XX_PCI=y CONFIG_SPI_ROCKCHIP=y # CONFIG_SPI_ROCKCHIP_SFC is not set # CONFIG_SPI_RSPI is not set # CONFIG_SPI_QUP is not set # CONFIG_SPI_S3C64XX is not set # CONFIG_SPI_SC18IS602 is not set # CONFIG_SPI_SH_MSIOF is not set # CONFIG_SPI_SH is not set # CONFIG_SPI_SH_HSPI is not set CONFIG_SPI_SIFIVE=y # CONFIG_SPI_SPRD is not set # CONFIG_SPI_SPRD_ADI is not set # CONFIG_SPI_STM32 is not set # CONFIG_SPI_STM32_QSPI is not set # CONFIG_SPI_ST_SSC4 is not set # CONFIG_SPI_SUN4I is not set # CONFIG_SPI_SUN6I is not set # CONFIG_SPI_SUNPLUS_SP7021 is not set # CONFIG_SPI_SYNQUACER is not set # CONFIG_SPI_MXIC is not set # CONFIG_SPI_TEGRA210_QUAD is not set # CONFIG_SPI_TEGRA114 is not set # CONFIG_SPI_TEGRA20_SFLASH is not set # CONFIG_SPI_TEGRA20_SLINK is not set # CONFIG_SPI_TOPCLIFF_PCH is not set # CONFIG_SPI_UNIPHIER is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_XLP is not set # CONFIG_SPI_XTENSA_XTFPGA is not set # CONFIG_SPI_ZYNQ_QSPI is not set CONFIG_SPI_ZYNQMP_GQSPI=y CONFIG_SPI_AMD=y # # SPI Multiplexer support # CONFIG_SPI_MUX=y # # SPI Protocol Masters # CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_SLAVE is not set CONFIG_SPI_DYNAMIC=y CONFIG_SPMI=y CONFIG_SPMI_HISI3670=y # CONFIG_SPMI_MSM_PMIC_ARB is not set # CONFIG_SPMI_MTK_PMIF is not set CONFIG_HSI=y CONFIG_HSI_BOARDINFO=y # # HSI controllers # # # HSI clients # # CONFIG_HSI_CHAR is not set CONFIG_PPS=y # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set CONFIG_PPS_CLIENT_PARPORT=y CONFIG_PPS_CLIENT_GPIO=y # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=y CONFIG_PTP_1588_CLOCK_OPTIONAL=y CONFIG_PTP_1588_CLOCK_DTE=y CONFIG_PTP_1588_CLOCK_QORIQ=y # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_PTP_1588_CLOCK_IDT82P33=y CONFIG_PTP_1588_CLOCK_IDTCM=y # end of PTP clock support CONFIG_PINCTRL=y CONFIG_GENERIC_PINCTRL_GROUPS=y CONFIG_PINMUX=y CONFIG_GENERIC_PINMUX_FUNCTIONS=y CONFIG_PINCONF=y CONFIG_GENERIC_PINCONF=y # CONFIG_DEBUG_PINCTRL is not set # CONFIG_PINCTRL_AMD is not set # CONFIG_PINCTRL_AT91PIO4 is not set # CONFIG_PINCTRL_AXP209 is not set # CONFIG_PINCTRL_BM1880 is not set CONFIG_PINCTRL_CY8C95X0=y # CONFIG_PINCTRL_DA850_PUPD is not set # CONFIG_PINCTRL_DA9062 is not set # CONFIG_PINCTRL_EQUILIBRIUM is not set # CONFIG_PINCTRL_INGENIC is not set # CONFIG_PINCTRL_LPC18XX is not set CONFIG_PINCTRL_MCP23S08_I2C=y CONFIG_PINCTRL_MCP23S08_SPI=y CONFIG_PINCTRL_MCP23S08=y CONFIG_PINCTRL_MICROCHIP_SGPIO=y CONFIG_PINCTRL_OCELOT=y CONFIG_PINCTRL_PALMAS=y # CONFIG_PINCTRL_PISTACHIO is not set # CONFIG_PINCTRL_ROCKCHIP is not set CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_STMFX=y # CONFIG_PINCTRL_SX150X is not set # CONFIG_PINCTRL_OWL is not set # CONFIG_PINCTRL_ASPEED_G4 is not set # CONFIG_PINCTRL_ASPEED_G5 is not set # CONFIG_PINCTRL_ASPEED_G6 is not set # CONFIG_PINCTRL_BCM281XX is not set # CONFIG_PINCTRL_BCM2835 is not set # CONFIG_PINCTRL_BCM4908 is not set # CONFIG_PINCTRL_BCM6318 is not set # CONFIG_PINCTRL_BCM6328 is not set # CONFIG_PINCTRL_BCM6358 is not set # CONFIG_PINCTRL_BCM6362 is not set # CONFIG_PINCTRL_BCM6368 is not set # CONFIG_PINCTRL_BCM63268 is not set # CONFIG_PINCTRL_IPROC_GPIO is not set # CONFIG_PINCTRL_CYGNUS_MUX is not set # CONFIG_PINCTRL_NS is not set # CONFIG_PINCTRL_NSP_GPIO is not set # CONFIG_PINCTRL_NS2_MUX is not set # CONFIG_PINCTRL_NSP_MUX is not set # CONFIG_PINCTRL_AS370 is not set # CONFIG_PINCTRL_BERLIN_BG4CT is not set CONFIG_PINCTRL_LOCHNAGAR=y CONFIG_PINCTRL_MADERA=y CONFIG_PINCTRL_CS47L35=y CONFIG_PINCTRL_CS47L85=y CONFIG_PINCTRL_CS47L90=y CONFIG_PINCTRL_CS47L92=y # # Intel pinctrl drivers # # end of Intel pinctrl drivers # # MediaTek pinctrl drivers # # CONFIG_EINT_MTK is not set # CONFIG_PINCTRL_MT2701 is not set # CONFIG_PINCTRL_MT7623 is not set # CONFIG_PINCTRL_MT7629 is not set # CONFIG_PINCTRL_MT8135 is not set # CONFIG_PINCTRL_MT8127 is not set # CONFIG_PINCTRL_MT2712 is not set # CONFIG_PINCTRL_MT6765 is not set # CONFIG_PINCTRL_MT6779 is not set # CONFIG_PINCTRL_MT6795 is not set # CONFIG_PINCTRL_MT6797 is not set # CONFIG_PINCTRL_MT7622 is not set # CONFIG_PINCTRL_MT7986 is not set # CONFIG_PINCTRL_MT8167 is not set # CONFIG_PINCTRL_MT8173 is not set # CONFIG_PINCTRL_MT8183 is not set # CONFIG_PINCTRL_MT8186 is not set # CONFIG_PINCTRL_MT8188 is not set # CONFIG_PINCTRL_MT8192 is not set # CONFIG_PINCTRL_MT8195 is not set # CONFIG_PINCTRL_MT8365 is not set # CONFIG_PINCTRL_MT8516 is not set # CONFIG_PINCTRL_MT6397 is not set # end of MediaTek pinctrl drivers CONFIG_PINCTRL_MESON=y # CONFIG_PINCTRL_WPCM450 is not set # CONFIG_PINCTRL_NPCM7XX is not set # CONFIG_PINCTRL_PXA25X is not set # CONFIG_PINCTRL_PXA27X is not set # CONFIG_PINCTRL_MSM is not set # CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set # CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set # CONFIG_PINCTRL_LPASS_LPI is not set # # Renesas pinctrl drivers # # CONFIG_PINCTRL_RENESAS is not set # CONFIG_PINCTRL_PFC_EMEV2 is not set # CONFIG_PINCTRL_PFC_R8A77995 is not set # CONFIG_PINCTRL_PFC_R8A7794 is not set # CONFIG_PINCTRL_PFC_R8A77990 is not set # CONFIG_PINCTRL_PFC_R8A7779 is not set # CONFIG_PINCTRL_PFC_R8A7790 is not set # CONFIG_PINCTRL_PFC_R8A77950 is not set # CONFIG_PINCTRL_PFC_R8A77951 is not set # CONFIG_PINCTRL_PFC_R8A7778 is not set # CONFIG_PINCTRL_PFC_R8A7793 is not set # CONFIG_PINCTRL_PFC_R8A7791 is not set # CONFIG_PINCTRL_PFC_R8A77965 is not set # CONFIG_PINCTRL_PFC_R8A77960 is not set # CONFIG_PINCTRL_PFC_R8A77961 is not set # CONFIG_PINCTRL_PFC_R8A779F0 is not set # CONFIG_PINCTRL_PFC_R8A7792 is not set # CONFIG_PINCTRL_PFC_R8A77980 is not set # CONFIG_PINCTRL_PFC_R8A77970 is not set # CONFIG_PINCTRL_PFC_R8A779A0 is not set # CONFIG_PINCTRL_PFC_R8A779G0 is not set # CONFIG_PINCTRL_PFC_R8A7740 is not set # CONFIG_PINCTRL_PFC_R8A73A4 is not set # CONFIG_PINCTRL_RZA1 is not set # CONFIG_PINCTRL_RZA2 is not set # CONFIG_PINCTRL_RZG2L is not set # CONFIG_PINCTRL_PFC_R8A77470 is not set # CONFIG_PINCTRL_PFC_R8A7745 is not set # CONFIG_PINCTRL_PFC_R8A7742 is not set # CONFIG_PINCTRL_PFC_R8A7743 is not set # CONFIG_PINCTRL_PFC_R8A7744 is not set # CONFIG_PINCTRL_PFC_R8A774C0 is not set # CONFIG_PINCTRL_PFC_R8A774E1 is not set # CONFIG_PINCTRL_PFC_R8A774A1 is not set # CONFIG_PINCTRL_PFC_R8A774B1 is not set # CONFIG_PINCTRL_RZN1 is not set # CONFIG_PINCTRL_RZV2M is not set # CONFIG_PINCTRL_PFC_SH7203 is not set # CONFIG_PINCTRL_PFC_SH7264 is not set # CONFIG_PINCTRL_PFC_SH7269 is not set # CONFIG_PINCTRL_PFC_SH7720 is not set # CONFIG_PINCTRL_PFC_SH7722 is not set # CONFIG_PINCTRL_PFC_SH7734 is not set # CONFIG_PINCTRL_PFC_SH7757 is not set # CONFIG_PINCTRL_PFC_SH7785 is not set # CONFIG_PINCTRL_PFC_SH7786 is not set # CONFIG_PINCTRL_PFC_SH73A0 is not set # CONFIG_PINCTRL_PFC_SH7723 is not set # CONFIG_PINCTRL_PFC_SH7724 is not set # CONFIG_PINCTRL_PFC_SHX3 is not set # end of Renesas pinctrl drivers # CONFIG_PINCTRL_EXYNOS is not set # CONFIG_PINCTRL_S3C24XX is not set # CONFIG_PINCTRL_S3C64XX is not set # CONFIG_PINCTRL_SPRD_SC9860 is not set # CONFIG_PINCTRL_STARFIVE_JH7100 is not set # CONFIG_PINCTRL_STM32F429 is not set # CONFIG_PINCTRL_STM32F469 is not set # CONFIG_PINCTRL_STM32F746 is not set # CONFIG_PINCTRL_STM32F769 is not set # CONFIG_PINCTRL_STM32H743 is not set # CONFIG_PINCTRL_STM32MP135 is not set # CONFIG_PINCTRL_STM32MP157 is not set # CONFIG_PINCTRL_TI_IODELAY is not set CONFIG_PINCTRL_UNIPHIER=y # CONFIG_PINCTRL_UNIPHIER_LD4 is not set # CONFIG_PINCTRL_UNIPHIER_PRO4 is not set # CONFIG_PINCTRL_UNIPHIER_SLD8 is not set # CONFIG_PINCTRL_UNIPHIER_PRO5 is not set # CONFIG_PINCTRL_UNIPHIER_PXS2 is not set # CONFIG_PINCTRL_UNIPHIER_LD6B is not set # CONFIG_PINCTRL_UNIPHIER_LD11 is not set # CONFIG_PINCTRL_UNIPHIER_LD20 is not set # CONFIG_PINCTRL_UNIPHIER_PXS3 is not set # CONFIG_PINCTRL_UNIPHIER_NX1 is not set # CONFIG_PINCTRL_TMPV7700 is not set CONFIG_GPIOLIB=y CONFIG_GPIOLIB_FASTPATH_LIMIT=512 CONFIG_OF_GPIO=y CONFIG_GPIOLIB_IRQCHIP=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_CDEV=y CONFIG_GPIO_CDEV_V1=y CONFIG_GPIO_GENERIC=y CONFIG_GPIO_MAX730X=y # # Memory mapped GPIO drivers # # CONFIG_GPIO_74XX_MMIO is not set # CONFIG_GPIO_ALTERA is not set # CONFIG_GPIO_ASPEED is not set # CONFIG_GPIO_ASPEED_SGPIO is not set # CONFIG_GPIO_ATH79 is not set # CONFIG_GPIO_RASPBERRYPI_EXP is not set # CONFIG_GPIO_BCM_KONA is not set # CONFIG_GPIO_BCM_XGS_IPROC is not set # CONFIG_GPIO_BRCMSTB is not set CONFIG_GPIO_CADENCE=y # CONFIG_GPIO_CLPS711X is not set CONFIG_GPIO_DWAPB=y # CONFIG_GPIO_EIC_SPRD is not set # CONFIG_GPIO_EM is not set # CONFIG_GPIO_FTGPIO010 is not set CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_GRGPIO=y # CONFIG_GPIO_HISI is not set CONFIG_GPIO_HLWD=y # CONFIG_GPIO_IOP is not set CONFIG_GPIO_LOGICVC=y # CONFIG_GPIO_LPC18XX is not set # CONFIG_GPIO_LPC32XX is not set CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_MENZ127=y # CONFIG_GPIO_MPC8XXX is not set # CONFIG_GPIO_MT7621 is not set # CONFIG_GPIO_MXC is not set # CONFIG_GPIO_MXS is not set # CONFIG_GPIO_PMIC_EIC_SPRD is not set # CONFIG_GPIO_PXA is not set # CONFIG_GPIO_RCAR is not set # CONFIG_GPIO_RDA is not set # CONFIG_GPIO_ROCKCHIP is not set # CONFIG_GPIO_SAMA5D2_PIOBU is not set # CONFIG_GPIO_SIFIVE is not set CONFIG_GPIO_SIOX=y # CONFIG_GPIO_SNPS_CREG is not set # CONFIG_GPIO_SPRD is not set # CONFIG_GPIO_STP_XWAY is not set CONFIG_GPIO_SYSCON=y # CONFIG_GPIO_TEGRA is not set # CONFIG_GPIO_TEGRA186 is not set # CONFIG_GPIO_TS4800 is not set # CONFIG_GPIO_UNIPHIER is not set # CONFIG_GPIO_VISCONTI is not set # CONFIG_GPIO_VX855 is not set # CONFIG_GPIO_XGENE_SB is not set CONFIG_GPIO_XILINX=y # CONFIG_GPIO_XLP is not set CONFIG_GPIO_AMD_FCH=y # CONFIG_GPIO_IDT3243X is not set # end of Memory mapped GPIO drivers # # I2C GPIO expanders # CONFIG_GPIO_ADNP=y CONFIG_GPIO_GW_PLD=y CONFIG_GPIO_MAX7300=y # CONFIG_GPIO_MAX732X is not set CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PCA9570=y # CONFIG_GPIO_PCF857X is not set CONFIG_GPIO_TPIC2810=y # CONFIG_GPIO_TS4900 is not set # end of I2C GPIO expanders # # MFD GPIO expanders # CONFIG_GPIO_ADP5520=y CONFIG_GPIO_ARIZONA=y CONFIG_GPIO_BD71815=y # CONFIG_GPIO_BD71828 is not set # CONFIG_GPIO_BD9571MWV is not set CONFIG_GPIO_DA9052=y # CONFIG_GPIO_DLN2 is not set CONFIG_GPIO_KEMPLD=y # CONFIG_GPIO_LP873X is not set CONFIG_GPIO_LP87565=y CONFIG_GPIO_MADERA=y CONFIG_GPIO_MAX77650=y # CONFIG_GPIO_PALMAS is not set # CONFIG_GPIO_RC5T583 is not set # CONFIG_GPIO_SL28CPLD is not set # CONFIG_GPIO_TC3589X is not set CONFIG_GPIO_TPS65218=y # CONFIG_GPIO_TPS6586X is not set # CONFIG_GPIO_TPS65910 is not set # CONFIG_GPIO_TPS65912 is not set CONFIG_GPIO_TWL4030=y CONFIG_GPIO_TWL6040=y CONFIG_GPIO_WM831X=y CONFIG_GPIO_WM8350=y CONFIG_GPIO_WM8994=y # end of MFD GPIO expanders # # PCI GPIO expanders # CONFIG_GPIO_BT8XX=y # CONFIG_GPIO_ML_IOH is not set # CONFIG_GPIO_PCH is not set CONFIG_GPIO_PCI_IDIO_16=y CONFIG_GPIO_PCIE_IDIO_24=y CONFIG_GPIO_RDC321X=y # end of PCI GPIO expanders # # SPI GPIO expanders # # CONFIG_GPIO_74X164 is not set CONFIG_GPIO_MAX3191X=y # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_PISOSR is not set CONFIG_GPIO_XRA1403=y CONFIG_GPIO_MOXTET=y # end of SPI GPIO expanders # # USB GPIO expanders # CONFIG_GPIO_VIPERBOARD=y # end of USB GPIO expanders # # Virtual GPIO drivers # CONFIG_GPIO_AGGREGATOR=y CONFIG_GPIO_MOCKUP=y # CONFIG_GPIO_VIRTIO is not set # CONFIG_GPIO_SIM is not set # end of Virtual GPIO drivers CONFIG_W1=y CONFIG_W1_CON=y # # 1-wire Bus Masters # # CONFIG_W1_MASTER_MATROX is not set CONFIG_W1_MASTER_DS2490=y CONFIG_W1_MASTER_DS2482=y # CONFIG_W1_MASTER_MXC is not set # CONFIG_W1_MASTER_DS1WM is not set # CONFIG_W1_MASTER_GPIO is not set CONFIG_W1_MASTER_SGI=y # end of 1-wire Bus Masters # # 1-wire Slaves # # CONFIG_W1_SLAVE_THERM is not set CONFIG_W1_SLAVE_SMEM=y CONFIG_W1_SLAVE_DS2405=y CONFIG_W1_SLAVE_DS2408=y CONFIG_W1_SLAVE_DS2408_READBACK=y CONFIG_W1_SLAVE_DS2413=y CONFIG_W1_SLAVE_DS2406=y CONFIG_W1_SLAVE_DS2423=y CONFIG_W1_SLAVE_DS2805=y CONFIG_W1_SLAVE_DS2430=y # CONFIG_W1_SLAVE_DS2431 is not set CONFIG_W1_SLAVE_DS2433=y # CONFIG_W1_SLAVE_DS2433_CRC is not set # CONFIG_W1_SLAVE_DS2438 is not set # CONFIG_W1_SLAVE_DS250X is not set CONFIG_W1_SLAVE_DS2780=y CONFIG_W1_SLAVE_DS2781=y CONFIG_W1_SLAVE_DS28E04=y CONFIG_W1_SLAVE_DS28E17=y # end of 1-wire Slaves # CONFIG_POWER_RESET is not set CONFIG_POWER_SUPPLY=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=y CONFIG_GENERIC_ADC_BATTERY=y # CONFIG_IP5XXX_POWER is not set CONFIG_WM831X_BACKUP=y CONFIG_WM831X_POWER=y CONFIG_WM8350_POWER=y CONFIG_TEST_POWER=y CONFIG_CHARGER_ADP5061=y # CONFIG_BATTERY_ACT8945A is not set # CONFIG_BATTERY_CW2015 is not set CONFIG_BATTERY_DS2760=y # CONFIG_BATTERY_DS2780 is not set CONFIG_BATTERY_DS2781=y CONFIG_BATTERY_DS2782=y # CONFIG_BATTERY_LEGO_EV3 is not set CONFIG_BATTERY_SAMSUNG_SDI=y CONFIG_BATTERY_SBS=y CONFIG_CHARGER_SBS=y CONFIG_MANAGER_SBS=y CONFIG_BATTERY_BQ27XXX=y CONFIG_BATTERY_BQ27XXX_I2C=y CONFIG_BATTERY_BQ27XXX_HDQ=y # CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set # CONFIG_BATTERY_DA9052 is not set # CONFIG_CHARGER_DA9150 is not set CONFIG_BATTERY_DA9150=y # CONFIG_AXP20X_POWER is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_BATTERY_MAX1721X is not set # CONFIG_BATTERY_TWL4030_MADC is not set # CONFIG_CHARGER_PCF50633 is not set # CONFIG_BATTERY_RX51 is not set CONFIG_CHARGER_ISP1704=y CONFIG_CHARGER_MAX8903=y # CONFIG_CHARGER_TWL4030 is not set CONFIG_CHARGER_LP8727=y CONFIG_CHARGER_GPIO=y CONFIG_CHARGER_MANAGER=y # CONFIG_CHARGER_LT3651 is not set CONFIG_CHARGER_LTC4162L=y # CONFIG_CHARGER_MAX14577 is not set # CONFIG_CHARGER_DETECTOR_MAX14656 is not set CONFIG_CHARGER_MAX77650=y CONFIG_CHARGER_MAX77693=y CONFIG_CHARGER_MAX77976=y # CONFIG_CHARGER_MAX8997 is not set CONFIG_CHARGER_MT6360=y CONFIG_CHARGER_MT6370=y # CONFIG_CHARGER_QCOM_SMBB is not set CONFIG_CHARGER_BQ2415X=y CONFIG_CHARGER_BQ24190=y CONFIG_CHARGER_BQ24257=y # CONFIG_CHARGER_BQ24735 is not set CONFIG_CHARGER_BQ2515X=y CONFIG_CHARGER_BQ25890=y CONFIG_CHARGER_BQ25980=y CONFIG_CHARGER_BQ256XX=y CONFIG_CHARGER_SMB347=y CONFIG_CHARGER_TPS65090=y CONFIG_BATTERY_GAUGE_LTC2941=y # CONFIG_BATTERY_GOLDFISH is not set # CONFIG_BATTERY_RT5033 is not set # CONFIG_CHARGER_RT9455 is not set # CONFIG_CHARGER_SC2731 is not set # CONFIG_FUEL_GAUGE_SC27XX is not set CONFIG_CHARGER_UCS1002=y CONFIG_CHARGER_BD99954=y CONFIG_BATTERY_UG3105=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_THERMAL_NETLINK is not set # CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_OF=y CONFIG_THERMAL_WRITABLE_TRIPS=y # CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y # CONFIG_THERMAL_GOV_STEP_WISE is not set # CONFIG_THERMAL_GOV_BANG_BANG is not set # CONFIG_THERMAL_GOV_USER_SPACE is not set CONFIG_CPU_THERMAL=y # CONFIG_DEVFREQ_THERMAL is not set # CONFIG_THERMAL_EMULATION is not set CONFIG_THERMAL_MMIO=y CONFIG_HISI_THERMAL=y # CONFIG_IMX_THERMAL is not set # CONFIG_IMX8MM_THERMAL is not set # CONFIG_K3_THERMAL is not set # CONFIG_QORIQ_THERMAL is not set # CONFIG_SPEAR_THERMAL is not set # CONFIG_SUN8I_THERMAL is not set # CONFIG_ROCKCHIP_THERMAL is not set # CONFIG_RCAR_THERMAL is not set # CONFIG_RCAR_GEN3_THERMAL is not set # CONFIG_RZG2L_THERMAL is not set # CONFIG_KIRKWOOD_THERMAL is not set # CONFIG_DOVE_THERMAL is not set # CONFIG_ARMADA_THERMAL is not set CONFIG_DA9062_THERMAL=y CONFIG_MTK_THERMAL=y # # Intel thermal drivers # # # ACPI INT340X thermal drivers # # end of ACPI INT340X thermal drivers # end of Intel thermal drivers # # Broadcom thermal drivers # # CONFIG_BCM2711_THERMAL is not set # CONFIG_BCM2835_THERMAL is not set # CONFIG_BRCMSTB_THERMAL is not set # CONFIG_BCM_NS_THERMAL is not set # CONFIG_BCM_SR_THERMAL is not set # end of Broadcom thermal drivers # # Texas Instruments thermal drivers # # CONFIG_TI_SOC_THERMAL is not set # end of Texas Instruments thermal drivers # # Samsung thermal drivers # # CONFIG_EXYNOS_THERMAL is not set # end of Samsung thermal drivers # # NVIDIA Tegra thermal drivers # # CONFIG_TEGRA_SOCTHERM is not set # CONFIG_TEGRA_BPMP_THERMAL is not set # CONFIG_TEGRA30_TSENSOR is not set # end of NVIDIA Tegra thermal drivers # CONFIG_GENERIC_ADC_THERMAL is not set # # Qualcomm thermal drivers # # CONFIG_QCOM_SPMI_ADC_TM5 is not set # CONFIG_QCOM_SPMI_TEMP_ALARM is not set # end of Qualcomm thermal drivers # CONFIG_UNIPHIER_THERMAL is not set # CONFIG_SPRD_THERMAL is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y CONFIG_WATCHDOG_OPEN_TIMEOUT=0 CONFIG_WATCHDOG_SYSFS=y # CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set # # Watchdog Pretimeout Governors # # CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set CONFIG_BD957XMUF_WATCHDOG=y CONFIG_DA9052_WATCHDOG=y # CONFIG_DA9055_WATCHDOG is not set # CONFIG_DA9063_WATCHDOG is not set CONFIG_DA9062_WATCHDOG=y # CONFIG_GPIO_WATCHDOG is not set CONFIG_MENF21BMC_WATCHDOG=y # CONFIG_MENZ069_WATCHDOG is not set CONFIG_WM831X_WATCHDOG=y # CONFIG_WM8350_WATCHDOG is not set CONFIG_XILINX_WATCHDOG=y CONFIG_ZIIRAVE_WATCHDOG=y # CONFIG_SL28CPLD_WATCHDOG is not set # CONFIG_ARMADA_37XX_WATCHDOG is not set # CONFIG_ASM9260_WATCHDOG is not set # CONFIG_AT91RM9200_WATCHDOG is not set # CONFIG_AT91SAM9X_WATCHDOG is not set # CONFIG_SAMA5D4_WATCHDOG is not set CONFIG_CADENCE_WATCHDOG=y # CONFIG_FTWDT010_WATCHDOG is not set # CONFIG_S3C2410_WATCHDOG is not set CONFIG_DW_WATCHDOG=y # CONFIG_EP93XX_WATCHDOG is not set # CONFIG_OMAP_WATCHDOG is not set # CONFIG_PNX4008_WATCHDOG is not set # CONFIG_DAVINCI_WATCHDOG is not set # CONFIG_K3_RTI_WATCHDOG is not set # CONFIG_RN5T618_WATCHDOG is not set # CONFIG_SUNXI_WATCHDOG is not set # CONFIG_NPCM7XX_WATCHDOG is not set # CONFIG_TWL4030_WATCHDOG is not set # CONFIG_STMP3XXX_RTC_WATCHDOG is not set # CONFIG_TS4800_WATCHDOG is not set # CONFIG_TS72XX_WATCHDOG is not set CONFIG_MAX63XX_WATCHDOG=y # CONFIG_MAX77620_WATCHDOG is not set # CONFIG_IMX2_WDT is not set # CONFIG_IMX7ULP_WDT is not set CONFIG_RETU_WATCHDOG=y # CONFIG_MOXART_WDT is not set # CONFIG_ST_LPC_WATCHDOG is not set # CONFIG_TEGRA_WATCHDOG is not set # CONFIG_QCOM_WDT is not set # CONFIG_MESON_GXBB_WATCHDOG is not set # CONFIG_MESON_WATCHDOG is not set # CONFIG_MEDIATEK_WATCHDOG is not set # CONFIG_DIGICOLOR_WATCHDOG is not set # CONFIG_LPC18XX_WATCHDOG is not set # CONFIG_RENESAS_WDT is not set # CONFIG_RENESAS_RZAWDT is not set # CONFIG_RENESAS_RZN1WDT is not set # CONFIG_RENESAS_RZG2LWDT is not set # CONFIG_ASPEED_WATCHDOG is not set # CONFIG_UNIPHIER_WATCHDOG is not set # CONFIG_RTD119X_WATCHDOG is not set # CONFIG_REALTEK_OTTO_WDT is not set # CONFIG_SPRD_WATCHDOG is not set # CONFIG_VISCONTI_WATCHDOG is not set # CONFIG_MSC313E_WATCHDOG is not set # CONFIG_APPLE_WATCHDOG is not set # CONFIG_SUNPLUS_WATCHDOG is not set CONFIG_ALIM7101_WDT=y # CONFIG_SC520_WDT is not set CONFIG_I6300ESB_WDT=y # CONFIG_KEMPLD_WDT is not set # CONFIG_RDC321X_WDT is not set # CONFIG_BCM47XX_WDT is not set # CONFIG_BCM2835_WDT is not set # CONFIG_BCM_KONA_WDT is not set # CONFIG_BCM7038_WDT is not set # CONFIG_IMGPDC_WDT is not set # CONFIG_MPC5200_WDT is not set # CONFIG_MEN_A21_WDT is not set # CONFIG_UML_WATCHDOG is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y CONFIG_SSB=y CONFIG_SSB_PCIHOST_POSSIBLE=y # CONFIG_SSB_PCIHOST is not set # CONFIG_SSB_DRIVER_GPIO is not set CONFIG_BCMA_POSSIBLE=y # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=y # CONFIG_MFD_ACT8945A is not set # CONFIG_MFD_SUN4I_GPADC is not set # CONFIG_MFD_AS3711 is not set # CONFIG_MFD_AS3722 is not set CONFIG_PMIC_ADP5520=y CONFIG_MFD_AAT2870_CORE=y # CONFIG_MFD_AT91_USART is not set CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_ATMEL_HLCDC=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_BD9571MWV=y CONFIG_MFD_AXP20X=y CONFIG_MFD_AXP20X_I2C=y CONFIG_MFD_MADERA=y # CONFIG_MFD_MADERA_I2C is not set # CONFIG_MFD_MADERA_SPI is not set # CONFIG_MFD_CS47L15 is not set CONFIG_MFD_CS47L35=y CONFIG_MFD_CS47L85=y CONFIG_MFD_CS47L90=y CONFIG_MFD_CS47L92=y # CONFIG_MFD_ASIC3 is not set # CONFIG_PMIC_DA903X is not set CONFIG_PMIC_DA9052=y CONFIG_MFD_DA9052_SPI=y CONFIG_MFD_DA9052_I2C=y # CONFIG_MFD_DA9055 is not set CONFIG_MFD_DA9062=y # CONFIG_MFD_DA9063 is not set CONFIG_MFD_DA9150=y CONFIG_MFD_DLN2=y # CONFIG_MFD_ENE_KB3930 is not set # CONFIG_MFD_EXYNOS_LPASS is not set # CONFIG_MFD_GATEWORKS_GSC is not set CONFIG_MFD_MC13XXX=y CONFIG_MFD_MC13XXX_SPI=y CONFIG_MFD_MC13XXX_I2C=y # CONFIG_MFD_MP2629 is not set # CONFIG_MFD_MXS_LRADC is not set # CONFIG_MFD_MX25_TSADC is not set CONFIG_MFD_HI6421_PMIC=y CONFIG_MFD_HI6421_SPMI=y # CONFIG_MFD_HI655X_PMIC is not set CONFIG_HTC_PASIC3=y # CONFIG_HTC_I2CPLD is not set CONFIG_LPC_ICH=y CONFIG_LPC_SCH=y # CONFIG_INTEL_SOC_PMIC is not set # CONFIG_MFD_IQS62X is not set # CONFIG_MFD_JANZ_CMODIO is not set CONFIG_MFD_KEMPLD=y # CONFIG_MFD_88PM800 is not set CONFIG_MFD_88PM805=y # CONFIG_MFD_88PM860X is not set CONFIG_MFD_MAX14577=y # CONFIG_MFD_MAX77620 is not set CONFIG_MFD_MAX77650=y # CONFIG_MFD_MAX77686 is not set CONFIG_MFD_MAX77693=y # CONFIG_MFD_MAX77714 is not set # CONFIG_MFD_MAX77843 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set CONFIG_MFD_MAX8997=y # CONFIG_MFD_MAX8998 is not set CONFIG_MFD_MT6360=y CONFIG_MFD_MT6370=y # CONFIG_MFD_MT6397 is not set CONFIG_MFD_MENF21BMC=y CONFIG_MFD_OCELOT=y CONFIG_EZX_PCAP=y # CONFIG_MFD_CPCAP is not set CONFIG_MFD_VIPERBOARD=y CONFIG_MFD_NTXEC=y CONFIG_MFD_RETU=y CONFIG_MFD_PCF50633=y # CONFIG_PCF50633_ADC is not set CONFIG_PCF50633_GPIO=y # CONFIG_UCB1400_CORE is not set # CONFIG_MFD_PM8XXX is not set # CONFIG_MFD_SPMI_PMIC is not set # CONFIG_MFD_SY7636A is not set CONFIG_MFD_RDC321X=y CONFIG_MFD_RT4831=y CONFIG_MFD_RT5033=y CONFIG_MFD_RT5120=y CONFIG_MFD_RC5T583=y # CONFIG_MFD_RK808 is not set # CONFIG_MFD_RN5T618 is not set CONFIG_MFD_SEC_CORE=y CONFIG_MFD_SI476X_CORE=y # CONFIG_MFD_SL28CPLD is not set # CONFIG_MFD_SM501 is not set CONFIG_MFD_SKY81452=y # CONFIG_MFD_SC27XX_PMIC is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_SUN6I_PRCM is not set CONFIG_MFD_SYSCON=y # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_LP3943 is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_TI_LMU is not set CONFIG_MFD_PALMAS=y CONFIG_TPS6105X=y CONFIG_TPS65010=y CONFIG_TPS6507X=y # CONFIG_MFD_TPS65086 is not set CONFIG_MFD_TPS65090=y # CONFIG_MFD_TPS65217 is not set CONFIG_MFD_TI_LP873X=y CONFIG_MFD_TI_LP87565=y CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_TPS65912=y # CONFIG_MFD_TPS65912_I2C is not set CONFIG_MFD_TPS65912_SPI=y CONFIG_TWL4030_CORE=y # CONFIG_MFD_TWL4030_AUDIO is not set CONFIG_TWL6040_CORE=y CONFIG_MFD_WL1273_CORE=y # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TIMBERDALE is not set CONFIG_MFD_TC3589X=y CONFIG_MFD_TQMX86=y CONFIG_MFD_VX855=y CONFIG_MFD_LOCHNAGAR=y CONFIG_MFD_ARIZONA=y CONFIG_MFD_ARIZONA_I2C=y # CONFIG_MFD_ARIZONA_SPI is not set CONFIG_MFD_CS47L24=y # CONFIG_MFD_WM5102 is not set # CONFIG_MFD_WM5110 is not set # CONFIG_MFD_WM8997 is not set # CONFIG_MFD_WM8998 is not set CONFIG_MFD_WM8400=y CONFIG_MFD_WM831X=y CONFIG_MFD_WM831X_I2C=y CONFIG_MFD_WM831X_SPI=y CONFIG_MFD_WM8350=y CONFIG_MFD_WM8350_I2C=y CONFIG_MFD_WM8994=y # CONFIG_MFD_STW481X is not set # CONFIG_MFD_ROHM_BD718XX is not set CONFIG_MFD_ROHM_BD71828=y CONFIG_MFD_ROHM_BD957XMUF=y # CONFIG_MFD_STM32_LPTIMER is not set # CONFIG_MFD_STM32_TIMERS is not set # CONFIG_MFD_STPMIC1 is not set CONFIG_MFD_STMFX=y CONFIG_MFD_ATC260X=y CONFIG_MFD_ATC260X_I2C=y # CONFIG_MFD_KHADAS_MCU is not set # CONFIG_MFD_ACER_A500_EC is not set # CONFIG_MFD_QCOM_PM8008 is not set # CONFIG_RAVE_SP_CORE is not set CONFIG_MFD_INTEL_M10_BMC=y # CONFIG_MFD_RSMU_I2C is not set CONFIG_MFD_RSMU_SPI=y # end of Multifunction device drivers CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y CONFIG_REGULATOR_88PG86X=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_AD5398=y # CONFIG_REGULATOR_ANATOP is not set CONFIG_REGULATOR_AAT2870=y CONFIG_REGULATOR_ARIZONA_LDO1=y CONFIG_REGULATOR_ARIZONA_MICSUPP=y CONFIG_REGULATOR_ATC260X=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_BD71815=y CONFIG_REGULATOR_BD71828=y CONFIG_REGULATOR_BD9571MWV=y # CONFIG_REGULATOR_BD957XMUF is not set CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_DA9062=y CONFIG_REGULATOR_DA9121=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_DA9211=y CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_FAN53880=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI6421=y CONFIG_REGULATOR_HI6421V530=y CONFIG_REGULATOR_HI6421V600=y # CONFIG_REGULATOR_ISL9305 is not set CONFIG_REGULATOR_ISL6271A=y CONFIG_REGULATOR_LOCHNAGAR=y CONFIG_REGULATOR_LP3971=y CONFIG_REGULATOR_LP3972=y # CONFIG_REGULATOR_LP872X is not set # CONFIG_REGULATOR_LP873X is not set # CONFIG_REGULATOR_LP8755 is not set CONFIG_REGULATOR_LP87565=y CONFIG_REGULATOR_LTC3589=y # CONFIG_REGULATOR_LTC3676 is not set CONFIG_REGULATOR_MAX14577=y CONFIG_REGULATOR_MAX1586=y # CONFIG_REGULATOR_MAX77620 is not set # CONFIG_REGULATOR_MAX77650 is not set CONFIG_REGULATOR_MAX8649=y CONFIG_REGULATOR_MAX8660=y CONFIG_REGULATOR_MAX8893=y # CONFIG_REGULATOR_MAX8907 is not set # CONFIG_REGULATOR_MAX8952 is not set # CONFIG_REGULATOR_MAX8973 is not set CONFIG_REGULATOR_MAX8997=y CONFIG_REGULATOR_MAX20086=y # CONFIG_REGULATOR_MAX77686 is not set # CONFIG_REGULATOR_MAX77693 is not set # CONFIG_REGULATOR_MAX77802 is not set CONFIG_REGULATOR_MAX77826=y CONFIG_REGULATOR_MC13XXX_CORE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y # CONFIG_REGULATOR_MCP16502 is not set # CONFIG_REGULATOR_MP5416 is not set CONFIG_REGULATOR_MP8859=y # CONFIG_REGULATOR_MP886X is not set CONFIG_REGULATOR_MPQ7920=y # CONFIG_REGULATOR_MT6311 is not set # CONFIG_REGULATOR_MT6315 is not set CONFIG_REGULATOR_MT6360=y CONFIG_REGULATOR_MT6370=y # CONFIG_REGULATOR_PALMAS is not set # CONFIG_REGULATOR_PBIAS is not set # CONFIG_REGULATOR_PCA9450 is not set # CONFIG_REGULATOR_PCAP is not set # CONFIG_REGULATOR_PCF50633 is not set CONFIG_REGULATOR_PF8X00=y CONFIG_REGULATOR_PFUZE100=y CONFIG_REGULATOR_PV88060=y # CONFIG_REGULATOR_PV88080 is not set # CONFIG_REGULATOR_PV88090 is not set CONFIG_REGULATOR_PWM=y # CONFIG_REGULATOR_QCOM_RPMH is not set CONFIG_REGULATOR_QCOM_SPMI=y # CONFIG_REGULATOR_QCOM_USB_VBUS is not set CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y CONFIG_REGULATOR_RC5T583=y CONFIG_REGULATOR_ROHM=y CONFIG_REGULATOR_RT4801=y # CONFIG_REGULATOR_RT4831 is not set CONFIG_REGULATOR_RT5033=y # CONFIG_REGULATOR_RT5120 is not set # CONFIG_REGULATOR_RT5190A is not set CONFIG_REGULATOR_RT5759=y CONFIG_REGULATOR_RT6160=y CONFIG_REGULATOR_RT6245=y # CONFIG_REGULATOR_RTQ2134 is not set CONFIG_REGULATOR_RTMV20=y # CONFIG_REGULATOR_RTQ6752 is not set CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y # CONFIG_REGULATOR_SC2731 is not set CONFIG_REGULATOR_SKY81452=y CONFIG_REGULATOR_SLG51000=y # CONFIG_REGULATOR_STM32_BOOSTER is not set # CONFIG_REGULATOR_STM32_VREFBUF is not set # CONFIG_REGULATOR_STM32_PWR is not set # CONFIG_REGULATOR_TI_ABB is not set # CONFIG_REGULATOR_STW481X_VMMC is not set # CONFIG_REGULATOR_SY8106A is not set CONFIG_REGULATOR_SY8824X=y CONFIG_REGULATOR_SY8827N=y CONFIG_REGULATOR_TPS51632=y # CONFIG_REGULATOR_TPS6105X is not set # CONFIG_REGULATOR_TPS62360 is not set CONFIG_REGULATOR_TPS6286X=y # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set CONFIG_REGULATOR_TPS65090=y CONFIG_REGULATOR_TPS65132=y # CONFIG_REGULATOR_TPS65218 is not set # CONFIG_REGULATOR_TPS6524X is not set CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y # CONFIG_REGULATOR_TPS65912 is not set # CONFIG_REGULATOR_TPS68470 is not set # CONFIG_REGULATOR_TWL4030 is not set # CONFIG_REGULATOR_UNIPHIER is not set CONFIG_REGULATOR_VCTRL=y # CONFIG_REGULATOR_WM831X is not set # CONFIG_REGULATOR_WM8350 is not set # CONFIG_REGULATOR_WM8400 is not set # CONFIG_REGULATOR_WM8994 is not set CONFIG_REGULATOR_QCOM_LABIBB=y CONFIG_CEC_CORE=y # # CEC support # CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_CEC_CH7322=y # CONFIG_CEC_MESON_AO is not set # CONFIG_CEC_MESON_G12A_AO is not set # CONFIG_CEC_GPIO is not set # CONFIG_CEC_SAMSUNG_S5P is not set # CONFIG_CEC_STI is not set # CONFIG_CEC_STM32 is not set # CONFIG_CEC_TEGRA is not set # end of CEC support CONFIG_MEDIA_SUPPORT=y # CONFIG_MEDIA_SUPPORT_FILTER is not set CONFIG_MEDIA_SUBDRV_AUTOSELECT=y # # Media device types # CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_RADIO_SUPPORT=y CONFIG_MEDIA_SDR_SUPPORT=y CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_MEDIA_TEST_SUPPORT=y # end of Media device types # # Media core support # CONFIG_VIDEO_DEV=y CONFIG_MEDIA_CONTROLLER=y CONFIG_DVB_CORE=y # end of Media core support # # Video4Linux options # CONFIG_VIDEO_V4L2_I2C=y CONFIG_VIDEO_V4L2_SUBDEV_API=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y CONFIG_VIDEO_TUNER=y CONFIG_V4L2_MEM2MEM_DEV=y # CONFIG_V4L2_FLASH_LED_CLASS is not set CONFIG_V4L2_FWNODE=y CONFIG_V4L2_ASYNC=y # end of Video4Linux options # # Media controller options # # CONFIG_MEDIA_CONTROLLER_DVB is not set CONFIG_MEDIA_CONTROLLER_REQUEST_API=y # end of Media controller options # # Digital TV options # # CONFIG_DVB_MMAP is not set # CONFIG_DVB_NET is not set CONFIG_DVB_MAX_ADAPTERS=16 CONFIG_DVB_DYNAMIC_MINORS=y # CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set CONFIG_DVB_ULE_DEBUG=y # end of Digital TV options # # Media drivers # # # Media drivers # CONFIG_MEDIA_USB_SUPPORT=y # # Webcam devices # CONFIG_USB_GSPCA=y # CONFIG_USB_GSPCA_BENQ is not set CONFIG_USB_GSPCA_CONEX=y # CONFIG_USB_GSPCA_CPIA1 is not set CONFIG_USB_GSPCA_DTCS033=y # CONFIG_USB_GSPCA_ETOMS is not set CONFIG_USB_GSPCA_FINEPIX=y # CONFIG_USB_GSPCA_JEILINJ is not set CONFIG_USB_GSPCA_JL2005BCD=y CONFIG_USB_GSPCA_KINECT=y # CONFIG_USB_GSPCA_KONICA is not set CONFIG_USB_GSPCA_MARS=y CONFIG_USB_GSPCA_MR97310A=y # CONFIG_USB_GSPCA_NW80X is not set # CONFIG_USB_GSPCA_OV519 is not set # CONFIG_USB_GSPCA_OV534 is not set CONFIG_USB_GSPCA_OV534_9=y CONFIG_USB_GSPCA_PAC207=y CONFIG_USB_GSPCA_PAC7302=y CONFIG_USB_GSPCA_PAC7311=y # CONFIG_USB_GSPCA_SE401 is not set CONFIG_USB_GSPCA_SN9C2028=y CONFIG_USB_GSPCA_SN9C20X=y CONFIG_USB_GSPCA_SONIXB=y # CONFIG_USB_GSPCA_SONIXJ is not set # CONFIG_USB_GSPCA_SPCA1528 is not set CONFIG_USB_GSPCA_SPCA500=y # CONFIG_USB_GSPCA_SPCA501 is not set CONFIG_USB_GSPCA_SPCA505=y # CONFIG_USB_GSPCA_SPCA506 is not set # CONFIG_USB_GSPCA_SPCA508 is not set CONFIG_USB_GSPCA_SPCA561=y CONFIG_USB_GSPCA_SQ905=y # CONFIG_USB_GSPCA_SQ905C is not set CONFIG_USB_GSPCA_SQ930X=y # CONFIG_USB_GSPCA_STK014 is not set CONFIG_USB_GSPCA_STK1135=y CONFIG_USB_GSPCA_STV0680=y # CONFIG_USB_GSPCA_SUNPLUS is not set CONFIG_USB_GSPCA_T613=y # CONFIG_USB_GSPCA_TOPRO is not set # CONFIG_USB_GSPCA_TOUPTEK is not set CONFIG_USB_GSPCA_TV8532=y # CONFIG_USB_GSPCA_VC032X is not set # CONFIG_USB_GSPCA_VICAM is not set CONFIG_USB_GSPCA_XIRLINK_CIT=y CONFIG_USB_GSPCA_ZC3XX=y # CONFIG_USB_GL860 is not set # CONFIG_USB_M5602 is not set # CONFIG_USB_STV06XX is not set CONFIG_USB_PWC=y # CONFIG_USB_PWC_DEBUG is not set CONFIG_USB_S2255=y CONFIG_VIDEO_USBTV=y CONFIG_USB_VIDEO_CLASS=y # # Analog TV USB devices # CONFIG_VIDEO_GO7007=y # CONFIG_VIDEO_GO7007_USB is not set CONFIG_VIDEO_GO7007_LOADER=y # CONFIG_VIDEO_HDPVR is not set CONFIG_VIDEO_PVRUSB2=y CONFIG_VIDEO_PVRUSB2_SYSFS=y # CONFIG_VIDEO_PVRUSB2_DVB is not set # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set CONFIG_VIDEO_STK1160_COMMON=y CONFIG_VIDEO_STK1160=y # # Analog/digital TV USB devices # CONFIG_VIDEO_CX231XX=y CONFIG_VIDEO_CX231XX_ALSA=y # CONFIG_VIDEO_CX231XX_DVB is not set # # Digital TV USB devices # CONFIG_DVB_B2C2_FLEXCOP_USB=y CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y CONFIG_DVB_USB_V2=y CONFIG_DVB_USB_AF9015=y # CONFIG_DVB_USB_AF9035 is not set CONFIG_DVB_USB_ANYSEE=y # CONFIG_DVB_USB_AU6610 is not set CONFIG_DVB_USB_AZ6007=y # CONFIG_DVB_USB_CE6230 is not set CONFIG_DVB_USB_DVBSKY=y CONFIG_DVB_USB_EC168=y CONFIG_DVB_USB_GL861=y CONFIG_DVB_USB_MXL111SF=y # CONFIG_DVB_USB_RTL28XXU is not set CONFIG_DVB_USB_ZD1301=y # CONFIG_SMS_USB_DRV is not set CONFIG_DVB_TTUSB_BUDGET=y # # Webcam, TV (analog/digital) USB devices # CONFIG_VIDEO_EM28XX=y CONFIG_VIDEO_EM28XX_V4L2=y CONFIG_VIDEO_EM28XX_ALSA=y CONFIG_VIDEO_EM28XX_DVB=y # # Software defined radio USB devices # CONFIG_USB_AIRSPY=y CONFIG_USB_HACKRF=y CONFIG_USB_MSI2500=y # CONFIG_MEDIA_PCI_SUPPORT is not set CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_MAXIRADIO=y CONFIG_RADIO_SAA7706H=y CONFIG_RADIO_SHARK=y CONFIG_RADIO_SHARK2=y # CONFIG_RADIO_SI4713 is not set CONFIG_RADIO_SI476X=y CONFIG_RADIO_TEA575X=y CONFIG_RADIO_TEA5764=y CONFIG_RADIO_TEA5764_XTAL=y # CONFIG_RADIO_TEF6862 is not set CONFIG_RADIO_WL1273=y CONFIG_USB_DSBR=y CONFIG_USB_KEENE=y # CONFIG_USB_MA901 is not set # CONFIG_USB_MR800 is not set CONFIG_USB_RAREMONO=y CONFIG_RADIO_SI470X=y CONFIG_USB_SI470X=y CONFIG_I2C_SI470X=y # CONFIG_V4L_RADIO_ISA_DRIVERS is not set CONFIG_MEDIA_PLATFORM_DRIVERS=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SDR_PLATFORM_DRIVERS=y CONFIG_DVB_PLATFORM_DRIVERS=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y CONFIG_VIDEO_MUX=y # # Allegro DVT media platform drivers # # CONFIG_VIDEO_ALLEGRO_DVT is not set # # Amlogic media platform drivers # # CONFIG_VIDEO_MESON_GE2D is not set # # Amphion drivers # # # Aspeed media platform drivers # CONFIG_VIDEO_ASPEED=y # # Atmel media platform drivers # # CONFIG_VIDEO_ATMEL_ISC is not set # CONFIG_VIDEO_ATMEL_XISC is not set # CONFIG_VIDEO_ATMEL_ISI is not set # CONFIG_VIDEO_MICROCHIP_CSI2DC is not set # # Cadence media platform drivers # CONFIG_VIDEO_CADENCE_CSI2RX=y CONFIG_VIDEO_CADENCE_CSI2TX=y # # Chips&Media media platform drivers # # CONFIG_VIDEO_CODA is not set # # Intel media platform drivers # # CONFIG_VIDEO_PXA27x is not set # # Marvell media platform drivers # # CONFIG_VIDEO_CAFE_CCIC is not set # CONFIG_VIDEO_MMP_CAMERA is not set # # Mediatek media platform drivers # # CONFIG_VIDEO_MEDIATEK_JPEG is not set # CONFIG_VIDEO_MEDIATEK_MDP is not set # CONFIG_VIDEO_MEDIATEK_VPU is not set # CONFIG_VIDEO_MEDIATEK_MDP3 is not set # # NVidia media platform drivers # # CONFIG_VIDEO_TEGRA_VDE is not set # # NXP media platform drivers # # CONFIG_VIDEO_IMX_MIPI_CSIS is not set # CONFIG_VIDEO_IMX_PXP is not set # CONFIG_VIDEO_MX2_EMMAPRP is not set # CONFIG_VIDEO_DW100 is not set # CONFIG_VIDEO_IMX8_JPEG is not set # # Qualcomm media platform drivers # # CONFIG_VIDEO_QCOM_CAMSS is not set # # Renesas media platform drivers # # CONFIG_VIDEO_RENESAS_CEU is not set # CONFIG_VIDEO_RCAR_ISP is not set # CONFIG_VIDEO_SH_VOU is not set # CONFIG_VIDEO_RCAR_CSI2 is not set # CONFIG_VIDEO_RCAR_VIN is not set # CONFIG_VIDEO_RENESAS_FCP is not set # CONFIG_VIDEO_RENESAS_FDP1 is not set # CONFIG_VIDEO_RENESAS_JPU is not set # CONFIG_VIDEO_RENESAS_VSP1 is not set # CONFIG_VIDEO_RCAR_DRIF is not set # # Rockchip media platform drivers # # CONFIG_VIDEO_ROCKCHIP_RGA is not set # CONFIG_VIDEO_ROCKCHIP_ISP1 is not set # # Samsung media platform drivers # # CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set # CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set # CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set # CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set # CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set # # STMicroelectronics media platform drivers # # CONFIG_VIDEO_STI_BDISP is not set # CONFIG_DVB_C8SECTPFE is not set # CONFIG_VIDEO_STI_DELTA is not set # CONFIG_VIDEO_STI_HVA is not set # CONFIG_VIDEO_STM32_DCMI is not set # CONFIG_VIDEO_STM32_DMA2D is not set # # Sunxi media platform drivers # # CONFIG_VIDEO_SUN4I_CSI is not set # # Texas Instruments drivers # # CONFIG_VIDEO_TI_CAL is not set # CONFIG_VIDEO_TI_VPE is not set # CONFIG_VIDEO_AM437X_VPFE is not set # CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY is not set # CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE is not set # CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY is not set # CONFIG_VIDEO_OMAP2_VOUT is not set # CONFIG_VIDEO_OMAP3 is not set # # Verisilicon media platform drivers # # CONFIG_VIDEO_HANTRO is not set # # VIA media platform drivers # # # Xilinx media platform drivers # CONFIG_VIDEO_XILINX=y # CONFIG_VIDEO_XILINX_CSI2RXSS is not set CONFIG_VIDEO_XILINX_TPG=y CONFIG_VIDEO_XILINX_VTC=y CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIM2M=y # CONFIG_VIDEO_VICODEC is not set CONFIG_VIDEO_VIMC=y CONFIG_VIDEO_VIVID=y # CONFIG_VIDEO_VIVID_CEC is not set CONFIG_VIDEO_VIVID_MAX_DEVS=64 CONFIG_DVB_TEST_DRIVERS=y CONFIG_DVB_VIDTV=y # # FireWire (IEEE 1394) Adapters # CONFIG_DVB_FIREDTV=y CONFIG_CYPRESS_FIRMWARE=y CONFIG_VIDEO_CX2341X=y CONFIG_VIDEO_TVEEPROM=y CONFIG_DVB_B2C2_FLEXCOP=y CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y CONFIG_VIDEO_V4L2_TPG=y CONFIG_VIDEOBUF2_CORE=y CONFIG_VIDEOBUF2_V4L2=y CONFIG_VIDEOBUF2_MEMOPS=y CONFIG_VIDEOBUF2_DMA_CONTIG=y CONFIG_VIDEOBUF2_VMALLOC=y CONFIG_VIDEOBUF2_DMA_SG=y # end of Media drivers # # Media ancillary drivers # # # Camera sensor devices # CONFIG_VIDEO_APTINA_PLL=y CONFIG_VIDEO_AR0521=y CONFIG_VIDEO_HI556=y CONFIG_VIDEO_HI846=y CONFIG_VIDEO_HI847=y CONFIG_VIDEO_IMX208=y CONFIG_VIDEO_IMX214=y CONFIG_VIDEO_IMX219=y CONFIG_VIDEO_IMX258=y # CONFIG_VIDEO_IMX274 is not set CONFIG_VIDEO_IMX290=y CONFIG_VIDEO_IMX319=y CONFIG_VIDEO_IMX334=y # CONFIG_VIDEO_IMX335 is not set CONFIG_VIDEO_IMX355=y # CONFIG_VIDEO_IMX412 is not set CONFIG_VIDEO_MAX9271_LIB=y CONFIG_VIDEO_MT9M001=y # CONFIG_VIDEO_MT9M032 is not set CONFIG_VIDEO_MT9M111=y CONFIG_VIDEO_MT9P031=y CONFIG_VIDEO_MT9T001=y # CONFIG_VIDEO_MT9T112 is not set CONFIG_VIDEO_MT9V011=y CONFIG_VIDEO_MT9V032=y # CONFIG_VIDEO_MT9V111 is not set CONFIG_VIDEO_NOON010PC30=y CONFIG_VIDEO_OG01A1B=y CONFIG_VIDEO_OV02A10=y CONFIG_VIDEO_OV08D10=y # CONFIG_VIDEO_OV13858 is not set # CONFIG_VIDEO_OV13B10 is not set CONFIG_VIDEO_OV2640=y CONFIG_VIDEO_OV2659=y # CONFIG_VIDEO_OV2680 is not set # CONFIG_VIDEO_OV2685 is not set # CONFIG_VIDEO_OV2740 is not set CONFIG_VIDEO_OV5640=y CONFIG_VIDEO_OV5645=y CONFIG_VIDEO_OV5647=y CONFIG_VIDEO_OV5670=y CONFIG_VIDEO_OV5675=y CONFIG_VIDEO_OV5693=y CONFIG_VIDEO_OV5695=y CONFIG_VIDEO_OV6650=y # CONFIG_VIDEO_OV7251 is not set CONFIG_VIDEO_OV7640=y # CONFIG_VIDEO_OV7670 is not set CONFIG_VIDEO_OV772X=y CONFIG_VIDEO_OV7740=y # CONFIG_VIDEO_OV8856 is not set # CONFIG_VIDEO_OV9282 is not set CONFIG_VIDEO_OV9640=y # CONFIG_VIDEO_OV9650 is not set # CONFIG_VIDEO_OV9734 is not set CONFIG_VIDEO_RDACM20=y # CONFIG_VIDEO_RDACM21 is not set # CONFIG_VIDEO_RJ54N1 is not set CONFIG_VIDEO_S5C73M3=y CONFIG_VIDEO_S5K4ECGX=y # CONFIG_VIDEO_S5K5BAF is not set CONFIG_VIDEO_S5K6A3=y # CONFIG_VIDEO_S5K6AA is not set CONFIG_VIDEO_SR030PC30=y # CONFIG_VIDEO_VS6624 is not set # CONFIG_VIDEO_CCS is not set # CONFIG_VIDEO_ET8EK8 is not set # CONFIG_VIDEO_M5MOLS is not set # end of Camera sensor devices # # Lens drivers # # CONFIG_VIDEO_AD5820 is not set CONFIG_VIDEO_AK7375=y CONFIG_VIDEO_DW9714=y CONFIG_VIDEO_DW9768=y # CONFIG_VIDEO_DW9807_VCM is not set # end of Lens drivers # # Flash devices # CONFIG_VIDEO_ADP1653=y CONFIG_VIDEO_LM3560=y # CONFIG_VIDEO_LM3646 is not set # end of Flash devices # # Audio decoders, processors and mixers # # CONFIG_VIDEO_CS3308 is not set # CONFIG_VIDEO_CS5345 is not set CONFIG_VIDEO_CS53L32A=y CONFIG_VIDEO_MSP3400=y CONFIG_VIDEO_SONY_BTF_MPX=y CONFIG_VIDEO_TDA1997X=y # CONFIG_VIDEO_TDA7432 is not set CONFIG_VIDEO_TDA9840=y # CONFIG_VIDEO_TEA6415C is not set CONFIG_VIDEO_TEA6420=y # CONFIG_VIDEO_TLV320AIC23B is not set # CONFIG_VIDEO_TVAUDIO is not set CONFIG_VIDEO_UDA1342=y # CONFIG_VIDEO_VP27SMPX is not set CONFIG_VIDEO_WM8739=y CONFIG_VIDEO_WM8775=y # end of Audio decoders, processors and mixers # # RDS decoders # CONFIG_VIDEO_SAA6588=y # end of RDS decoders # # Video decoders # CONFIG_VIDEO_ADV7180=y CONFIG_VIDEO_ADV7183=y CONFIG_VIDEO_ADV748X=y CONFIG_VIDEO_ADV7604=y # CONFIG_VIDEO_ADV7604_CEC is not set CONFIG_VIDEO_ADV7842=y CONFIG_VIDEO_ADV7842_CEC=y # CONFIG_VIDEO_BT819 is not set CONFIG_VIDEO_BT856=y # CONFIG_VIDEO_BT866 is not set # CONFIG_VIDEO_ISL7998X is not set CONFIG_VIDEO_KS0127=y CONFIG_VIDEO_MAX9286=y # CONFIG_VIDEO_ML86V7667 is not set # CONFIG_VIDEO_SAA7110 is not set CONFIG_VIDEO_SAA711X=y # CONFIG_VIDEO_TC358743 is not set CONFIG_VIDEO_TVP514X=y CONFIG_VIDEO_TVP5150=y # CONFIG_VIDEO_TVP7002 is not set CONFIG_VIDEO_TW2804=y CONFIG_VIDEO_TW9903=y CONFIG_VIDEO_TW9906=y # CONFIG_VIDEO_TW9910 is not set # CONFIG_VIDEO_VPX3220 is not set # # Video and audio decoders # # CONFIG_VIDEO_SAA717X is not set CONFIG_VIDEO_CX25840=y # end of Video decoders # # Video encoders # CONFIG_VIDEO_AD9389B=y CONFIG_VIDEO_ADV7170=y # CONFIG_VIDEO_ADV7175 is not set # CONFIG_VIDEO_ADV7343 is not set CONFIG_VIDEO_ADV7393=y # CONFIG_VIDEO_ADV7511 is not set # CONFIG_VIDEO_AK881X is not set # CONFIG_VIDEO_SAA7127 is not set CONFIG_VIDEO_SAA7185=y CONFIG_VIDEO_THS8200=y # end of Video encoders # # Video improvement chips # CONFIG_VIDEO_UPD64031A=y CONFIG_VIDEO_UPD64083=y # end of Video improvement chips # # Audio/Video compression chips # CONFIG_VIDEO_SAA6752HS=y # end of Audio/Video compression chips # # SDR tuner chips # CONFIG_SDR_MAX2175=y # end of SDR tuner chips # # Miscellaneous helper chips # CONFIG_VIDEO_I2C=y CONFIG_VIDEO_M52790=y CONFIG_VIDEO_ST_MIPID02=y CONFIG_VIDEO_THS7303=y # end of Miscellaneous helper chips # # Media SPI Adapters # CONFIG_CXD2880_SPI_DRV=y CONFIG_VIDEO_GS1662=y # end of Media SPI Adapters CONFIG_MEDIA_TUNER=y # # Customize TV tuners # CONFIG_MEDIA_TUNER_E4000=y # CONFIG_MEDIA_TUNER_FC0011 is not set CONFIG_MEDIA_TUNER_FC0012=y # CONFIG_MEDIA_TUNER_FC0013 is not set # CONFIG_MEDIA_TUNER_FC2580 is not set CONFIG_MEDIA_TUNER_IT913X=y # CONFIG_MEDIA_TUNER_M88RS6000T is not set CONFIG_MEDIA_TUNER_MAX2165=y CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_MEDIA_TUNER_MSI001=y CONFIG_MEDIA_TUNER_MT2060=y CONFIG_MEDIA_TUNER_MT2063=y CONFIG_MEDIA_TUNER_MT20XX=y # CONFIG_MEDIA_TUNER_MT2131 is not set CONFIG_MEDIA_TUNER_MT2266=y # CONFIG_MEDIA_TUNER_MXL301RF is not set CONFIG_MEDIA_TUNER_MXL5005S=y CONFIG_MEDIA_TUNER_MXL5007T=y # CONFIG_MEDIA_TUNER_QM1D1B0004 is not set CONFIG_MEDIA_TUNER_QM1D1C0042=y CONFIG_MEDIA_TUNER_QT1010=y CONFIG_MEDIA_TUNER_R820T=y CONFIG_MEDIA_TUNER_SI2157=y CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA18212=y CONFIG_MEDIA_TUNER_TDA18218=y CONFIG_MEDIA_TUNER_TDA18250=y CONFIG_MEDIA_TUNER_TDA18271=y CONFIG_MEDIA_TUNER_TDA827X=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA9887=y CONFIG_MEDIA_TUNER_TEA5761=y CONFIG_MEDIA_TUNER_TEA5767=y CONFIG_MEDIA_TUNER_TUA9001=y CONFIG_MEDIA_TUNER_XC2028=y CONFIG_MEDIA_TUNER_XC4000=y CONFIG_MEDIA_TUNER_XC5000=y # end of Customize TV tuners # # Customise DVB Frontends # # # Multistandard (satellite) frontends # CONFIG_DVB_M88DS3103=y CONFIG_DVB_MXL5XX=y # CONFIG_DVB_STB0899 is not set CONFIG_DVB_STB6100=y CONFIG_DVB_STV090x=y CONFIG_DVB_STV0910=y # CONFIG_DVB_STV6110x is not set # CONFIG_DVB_STV6111 is not set # # Multistandard (cable + terrestrial) frontends # CONFIG_DVB_DRXK=y CONFIG_DVB_MN88472=y # CONFIG_DVB_MN88473 is not set CONFIG_DVB_SI2165=y CONFIG_DVB_TDA18271C2DD=y # # DVB-S (satellite) frontends # CONFIG_DVB_CX24110=y CONFIG_DVB_CX24116=y CONFIG_DVB_CX24117=y CONFIG_DVB_CX24120=y CONFIG_DVB_CX24123=y # CONFIG_DVB_DS3000 is not set CONFIG_DVB_MB86A16=y CONFIG_DVB_MT312=y CONFIG_DVB_S5H1420=y # CONFIG_DVB_SI21XX is not set CONFIG_DVB_STB6000=y CONFIG_DVB_STV0288=y CONFIG_DVB_STV0299=y CONFIG_DVB_STV0900=y CONFIG_DVB_STV6110=y CONFIG_DVB_TDA10071=y # CONFIG_DVB_TDA10086 is not set CONFIG_DVB_TDA8083=y CONFIG_DVB_TDA8261=y CONFIG_DVB_TDA826X=y CONFIG_DVB_TS2020=y CONFIG_DVB_TUA6100=y CONFIG_DVB_TUNER_CX24113=y CONFIG_DVB_TUNER_ITD1000=y CONFIG_DVB_VES1X93=y CONFIG_DVB_ZL10036=y CONFIG_DVB_ZL10039=y # # DVB-T (terrestrial) frontends # CONFIG_DVB_AF9013=y CONFIG_DVB_CX22700=y CONFIG_DVB_CX22702=y CONFIG_DVB_CXD2820R=y CONFIG_DVB_CXD2841ER=y CONFIG_DVB_DIB3000MB=y CONFIG_DVB_DIB3000MC=y CONFIG_DVB_DIB7000M=y CONFIG_DVB_DIB7000P=y # CONFIG_DVB_DIB9000 is not set CONFIG_DVB_DRXD=y CONFIG_DVB_EC100=y CONFIG_DVB_L64781=y CONFIG_DVB_MT352=y # CONFIG_DVB_NXT6000 is not set CONFIG_DVB_RTL2830=y CONFIG_DVB_RTL2832=y CONFIG_DVB_RTL2832_SDR=y # CONFIG_DVB_S5H1432 is not set CONFIG_DVB_SI2168=y CONFIG_DVB_SP887X=y # CONFIG_DVB_STV0367 is not set # CONFIG_DVB_TDA10048 is not set CONFIG_DVB_TDA1004X=y CONFIG_DVB_ZD1301_DEMOD=y CONFIG_DVB_ZL10353=y CONFIG_DVB_CXD2880=y # # DVB-C (cable) frontends # CONFIG_DVB_STV0297=y CONFIG_DVB_TDA10021=y CONFIG_DVB_TDA10023=y CONFIG_DVB_VES1820=y # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # # CONFIG_DVB_AU8522_DTV is not set # CONFIG_DVB_AU8522_V4L is not set CONFIG_DVB_BCM3510=y CONFIG_DVB_LG2160=y CONFIG_DVB_LGDT3305=y CONFIG_DVB_LGDT3306A=y CONFIG_DVB_LGDT330X=y CONFIG_DVB_MXL692=y CONFIG_DVB_NXT200X=y CONFIG_DVB_OR51132=y CONFIG_DVB_OR51211=y CONFIG_DVB_S5H1409=y # CONFIG_DVB_S5H1411 is not set # # ISDB-T (terrestrial) frontends # CONFIG_DVB_DIB8000=y CONFIG_DVB_MB86A20S=y CONFIG_DVB_S921=y # # ISDB-S (satellite) & ISDB-T (terrestrial) frontends # CONFIG_DVB_MN88443X=y CONFIG_DVB_TC90522=y # # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=y # CONFIG_DVB_TUNER_DIB0070 is not set # CONFIG_DVB_TUNER_DIB0090 is not set # # SEC control devices for DVB-S # CONFIG_DVB_A8293=y # CONFIG_DVB_AF9033 is not set CONFIG_DVB_ASCOT2E=y CONFIG_DVB_ATBM8830=y CONFIG_DVB_HELENE=y CONFIG_DVB_HORUS3A=y CONFIG_DVB_ISL6405=y CONFIG_DVB_ISL6421=y CONFIG_DVB_ISL6423=y CONFIG_DVB_IX2505V=y CONFIG_DVB_LGS8GL5=y # CONFIG_DVB_LGS8GXX is not set CONFIG_DVB_LNBH25=y CONFIG_DVB_LNBH29=y CONFIG_DVB_LNBP21=y CONFIG_DVB_LNBP22=y CONFIG_DVB_M88RS2000=y CONFIG_DVB_TDA665x=y CONFIG_DVB_DRX39XYJ=y # # Common Interface (EN50221) controller drivers # # CONFIG_DVB_CXD2099 is not set CONFIG_DVB_SP2=y # end of Customise DVB Frontends # # Tools to develop new frontends # CONFIG_DVB_DUMMY_FE=y # end of Media ancillary drivers # # Graphics support # CONFIG_APERTURE_HELPERS=y # CONFIG_IMX_IPUV3_CORE is not set CONFIG_DRM=y CONFIG_DRM_MIPI_DBI=y CONFIG_DRM_MIPI_DSI=y # CONFIG_DRM_DEBUG_MM is not set # CONFIG_DRM_KUNIT_TEST is not set CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y # CONFIG_DRM_DEBUG_MODESET_LOCK is not set CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set CONFIG_DRM_DP_AUX_BUS=y CONFIG_DRM_DISPLAY_HELPER=y CONFIG_DRM_DISPLAY_DP_HELPER=y CONFIG_DRM_DISPLAY_HDCP_HELPER=y CONFIG_DRM_DISPLAY_HDMI_HELPER=y CONFIG_DRM_DP_AUX_CHARDEV=y # CONFIG_DRM_DP_CEC is not set CONFIG_DRM_TTM=y CONFIG_DRM_VRAM_HELPER=y CONFIG_DRM_TTM_HELPER=y CONFIG_DRM_GEM_DMA_HELPER=y CONFIG_DRM_GEM_SHMEM_HELPER=y # # I2C encoder or helper chips # CONFIG_DRM_I2C_CH7006=y # CONFIG_DRM_I2C_SIL164 is not set # CONFIG_DRM_I2C_NXP_TDA998X is not set # CONFIG_DRM_I2C_NXP_TDA9950 is not set # end of I2C encoder or helper chips # # ARM devices # # CONFIG_DRM_HDLCD is not set # CONFIG_DRM_MALI_DISPLAY is not set CONFIG_DRM_KOMEDA=y # end of ARM devices # CONFIG_DRM_RADEON is not set # CONFIG_DRM_AMDGPU is not set CONFIG_DRM_NOUVEAU=y CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y CONFIG_NOUVEAU_DEBUG=5 CONFIG_NOUVEAU_DEBUG_DEFAULT=3 # CONFIG_NOUVEAU_DEBUG_MMU is not set # CONFIG_NOUVEAU_DEBUG_PUSH is not set CONFIG_DRM_NOUVEAU_BACKLIGHT=y # CONFIG_DRM_KMB_DISPLAY is not set CONFIG_DRM_VGEM=y CONFIG_DRM_VKMS=y # CONFIG_DRM_EXYNOS is not set # CONFIG_DRM_UDL is not set # CONFIG_DRM_AST is not set CONFIG_DRM_MGAG200=y # CONFIG_DRM_RCAR_DW_HDMI is not set CONFIG_DRM_RCAR_USE_LVDS=y # CONFIG_DRM_RCAR_USE_MIPI_DSI is not set # CONFIG_DRM_SUN4I is not set CONFIG_DRM_QXL=y CONFIG_DRM_PANEL=y # # Display Panels # # CONFIG_DRM_PANEL_ABT_Y030XX067A is not set CONFIG_DRM_PANEL_ARM_VERSATILE=y CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y # CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y # CONFIG_DRM_PANEL_DSI_CM is not set # CONFIG_DRM_PANEL_LVDS is not set # CONFIG_DRM_PANEL_EBBG_FT8719 is not set # CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y CONFIG_DRM_PANEL_ILITEK_IL9322=y CONFIG_DRM_PANEL_ILITEK_ILI9341=y CONFIG_DRM_PANEL_ILITEK_ILI9881C=y CONFIG_DRM_PANEL_INNOLUX_EJ030NA=y CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y CONFIG_DRM_PANEL_JDI_LT070ME05000=y CONFIG_DRM_PANEL_JDI_R63452=y CONFIG_DRM_PANEL_KHADAS_TS050=y CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set CONFIG_DRM_PANEL_LG_LB035Q02=y CONFIG_DRM_PANEL_LG_LG4573=y # CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set CONFIG_DRM_PANEL_NEWVISION_NV3052C=y # CONFIG_DRM_PANEL_NOVATEK_NT35510 is not set # CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set CONFIG_DRM_PANEL_NOVATEK_NT35950=y # CONFIG_DRM_PANEL_NOVATEK_NT36672A is not set CONFIG_DRM_PANEL_NOVATEK_NT39016=y # CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y # CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y # CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set # CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set # CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set CONFIG_DRM_PANEL_RAYDIUM_RM68200=y CONFIG_DRM_PANEL_RONBO_RB070D30=y # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y # CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y # CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI is not set # CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI is not set CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y CONFIG_DRM_PANEL_SEIKO_43WVF1G=y CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y # CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set CONFIG_DRM_PANEL_SHARP_LS060T1SX01=y # CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set CONFIG_DRM_PANEL_SITRONIX_ST7703=y CONFIG_DRM_PANEL_SITRONIX_ST7789V=y CONFIG_DRM_PANEL_SONY_ACX565AKM=y # CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521 is not set CONFIG_DRM_PANEL_TDO_TL070WSH30=y CONFIG_DRM_PANEL_TPO_TD028TTEC1=y CONFIG_DRM_PANEL_TPO_TD043MTEA1=y CONFIG_DRM_PANEL_TPO_TPG110=y CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y CONFIG_DRM_PANEL_VISIONOX_RM69299=y CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y CONFIG_DRM_PANEL_XINPENG_XPP055C272=y # end of Display Panels CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y # # Display Interface Bridges # CONFIG_DRM_CDNS_DSI=y CONFIG_DRM_CHIPONE_ICN6211=y # CONFIG_DRM_CHRONTEL_CH7033 is not set # CONFIG_DRM_CROS_EC_ANX7688 is not set CONFIG_DRM_DISPLAY_CONNECTOR=y # CONFIG_DRM_FSL_LDB is not set # CONFIG_DRM_ITE_IT6505 is not set CONFIG_DRM_LONTIUM_LT8912B=y # CONFIG_DRM_LONTIUM_LT9211 is not set # CONFIG_DRM_LONTIUM_LT9611 is not set # CONFIG_DRM_LONTIUM_LT9611UXC is not set CONFIG_DRM_ITE_IT66121=y CONFIG_DRM_LVDS_CODEC=y CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y CONFIG_DRM_NWL_MIPI_DSI=y CONFIG_DRM_NXP_PTN3460=y CONFIG_DRM_PARADE_PS8622=y # CONFIG_DRM_PARADE_PS8640 is not set CONFIG_DRM_SIL_SII8620=y CONFIG_DRM_SII902X=y CONFIG_DRM_SII9234=y CONFIG_DRM_SIMPLE_BRIDGE=y # CONFIG_DRM_THINE_THC63LVD1024 is not set CONFIG_DRM_TOSHIBA_TC358762=y CONFIG_DRM_TOSHIBA_TC358764=y # CONFIG_DRM_TOSHIBA_TC358767 is not set CONFIG_DRM_TOSHIBA_TC358768=y # CONFIG_DRM_TOSHIBA_TC358775 is not set # CONFIG_DRM_TI_DLPC3433 is not set CONFIG_DRM_TI_TFP410=y CONFIG_DRM_TI_SN65DSI83=y CONFIG_DRM_TI_SN65DSI86=y # CONFIG_DRM_TI_TPD12S015 is not set CONFIG_DRM_ANALOGIX_ANX6345=y # CONFIG_DRM_ANALOGIX_ANX78XX is not set CONFIG_DRM_ANALOGIX_DP=y CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_DRM_I2C_ADV7511=y # CONFIG_DRM_I2C_ADV7511_AUDIO is not set # CONFIG_DRM_I2C_ADV7511_CEC is not set # CONFIG_DRM_CDNS_MHDP8546 is not set # CONFIG_DRM_IMX8QM_LDB is not set # CONFIG_DRM_IMX8QXP_LDB is not set # CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set # CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set # end of Display Interface Bridges # CONFIG_DRM_INGENIC is not set # CONFIG_DRM_V3D is not set # CONFIG_DRM_ETNAVIV is not set # CONFIG_DRM_HISI_HIBMC is not set CONFIG_DRM_LOGICVC=y CONFIG_DRM_MXS=y # CONFIG_DRM_MXSFB is not set CONFIG_DRM_IMX_LCDIF=y # CONFIG_DRM_ARCPGU is not set CONFIG_DRM_BOCHS=y # CONFIG_DRM_CIRRUS_QEMU is not set CONFIG_DRM_GM12U320=y CONFIG_DRM_PANEL_MIPI_DBI=y CONFIG_DRM_SIMPLEDRM=y CONFIG_TINYDRM_HX8357D=y CONFIG_TINYDRM_ILI9163=y CONFIG_TINYDRM_ILI9225=y CONFIG_TINYDRM_ILI9341=y # CONFIG_TINYDRM_ILI9486 is not set # CONFIG_TINYDRM_MI0283QT is not set CONFIG_TINYDRM_REPAPER=y CONFIG_TINYDRM_ST7586=y CONFIG_TINYDRM_ST7735R=y # CONFIG_DRM_PL111 is not set # CONFIG_DRM_TVE200 is not set # CONFIG_DRM_LIMA is not set # CONFIG_DRM_ASPEED_GFX is not set # CONFIG_DRM_MCDE is not set # CONFIG_DRM_TIDSS is not set CONFIG_DRM_GUD=y # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_SPRD is not set CONFIG_DRM_LEGACY=y CONFIG_DRM_TDFX=y # CONFIG_DRM_R128 is not set # CONFIG_DRM_MGA is not set CONFIG_DRM_VIA=y CONFIG_DRM_SAVAGE=y CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y CONFIG_DRM_NOMODESET=y # # Frame buffer Devices # CONFIG_FB_CMDLINE=y CONFIG_FB_NOTIFY=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y CONFIG_FB_FOREIGN_ENDIAN=y # CONFIG_FB_BOTH_ENDIAN is not set # CONFIG_FB_BIG_ENDIAN is not set CONFIG_FB_LITTLE_ENDIAN=y CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=y CONFIG_FB_SVGALIB=y CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set CONFIG_FB_PM2=y CONFIG_FB_PM2_FIFO_DISCONNECT=y # CONFIG_FB_CLPS711X is not set # CONFIG_FB_IMX is not set CONFIG_FB_CYBER2000=y CONFIG_FB_CYBER2000_DDC=y # CONFIG_FB_ARC is not set # CONFIG_FB_CONTROL is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_UVESA=y # CONFIG_FB_GBE is not set # CONFIG_FB_PVR2 is not set CONFIG_FB_OPENCORES=y CONFIG_FB_S1D13XXX=y # CONFIG_FB_ATMEL is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_I740=y # CONFIG_FB_MATROX is not set CONFIG_FB_RADEON=y # CONFIG_FB_RADEON_I2C is not set # CONFIG_FB_RADEON_BACKLIGHT is not set CONFIG_FB_RADEON_DEBUG=y CONFIG_FB_ATY128=y CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y CONFIG_FB_ATY_GENERIC_LCD=y CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y CONFIG_FB_S3=y # CONFIG_FB_S3_DDC is not set CONFIG_FB_SAVAGE=y CONFIG_FB_SAVAGE_I2C=y # CONFIG_FB_SAVAGE_ACCEL is not set CONFIG_FB_SIS=y CONFIG_FB_SIS_300=y # CONFIG_FB_SIS_315 is not set # CONFIG_FB_VIA is not set CONFIG_FB_NEOMAGIC=y CONFIG_FB_KYRO=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set CONFIG_FB_VT8623=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_WM8505 is not set # CONFIG_FB_PXA168 is not set # CONFIG_FB_W100 is not set # CONFIG_FB_SH_MOBILE_LCDC is not set # CONFIG_FB_TMIO is not set # CONFIG_FB_S3C is not set CONFIG_FB_SMSCUFX=y CONFIG_FB_UDL=y CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_GOLDFISH is not set # CONFIG_FB_DA8XX is not set CONFIG_FB_VIRTUAL=y # CONFIG_FB_METRONOME is not set CONFIG_FB_MB862XX=y CONFIG_FB_MB862XX_PCI_GDC=y CONFIG_FB_MB862XX_I2C=y # CONFIG_FB_BROADSHEET is not set CONFIG_FB_SSD1307=y # CONFIG_FB_SM712 is not set CONFIG_FB_OMAP_LCD_H3=y # CONFIG_FB_OMAP2 is not set # CONFIG_MMP_DISP is not set # end of Frame buffer Devices # # Backlight & LCD device support # # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_KTD253=y # CONFIG_BACKLIGHT_OMAP1 is not set CONFIG_BACKLIGHT_PWM=y # CONFIG_BACKLIGHT_DA9052 is not set CONFIG_BACKLIGHT_MT6370=y CONFIG_BACKLIGHT_QCOM_WLED=y CONFIG_BACKLIGHT_RT4831=y CONFIG_BACKLIGHT_WM831X=y CONFIG_BACKLIGHT_ADP5520=y CONFIG_BACKLIGHT_ADP8860=y CONFIG_BACKLIGHT_ADP8870=y CONFIG_BACKLIGHT_PCF50633=y CONFIG_BACKLIGHT_AAT2870=y # CONFIG_BACKLIGHT_LM3630A is not set CONFIG_BACKLIGHT_LM3639=y CONFIG_BACKLIGHT_LP855X=y # CONFIG_BACKLIGHT_PANDORA is not set CONFIG_BACKLIGHT_SKY81452=y CONFIG_BACKLIGHT_GPIO=y CONFIG_BACKLIGHT_LV5207LP=y CONFIG_BACKLIGHT_BD6107=y # CONFIG_BACKLIGHT_ARCXCNN is not set CONFIG_BACKLIGHT_LED=y # end of Backlight & LCD device support CONFIG_VGASTATE=y CONFIG_VIDEOMODE_HELPERS=y CONFIG_HDMI=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set # end of Graphics support CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_PCM_ELD=y CONFIG_SND_PCM_IEC958=y CONFIG_SND_DMAENGINE_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=y CONFIG_SND_COMPRESS_OFFLOAD=y CONFIG_SND_JACK=y # CONFIG_SND_OSSEMUL is not set # CONFIG_SND_PCM_TIMER is not set CONFIG_SND_HRTIMER=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_MAX_CARDS=32 # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_PROC_FS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_CTL_FAST_LOOKUP is not set # CONFIG_SND_DEBUG is not set # CONFIG_SND_CTL_INPUT_VALIDATION is not set CONFIG_SND_VMASTER=y CONFIG_SND_CTL_LED=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=y # CONFIG_SND_ALOOP is not set # CONFIG_SND_MTPAV is not set CONFIG_SND_MTS64=y # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_SERIAL_GENERIC=y # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 # CONFIG_SND_PCI is not set # # HD-Audio # CONFIG_SND_HDA=y CONFIG_SND_HDA_GENERIC_LEDS=y # CONFIG_SND_HDA_HWDEP is not set CONFIG_SND_HDA_RECONFIG=y # CONFIG_SND_HDA_PATCH_LOADER is not set # CONFIG_SND_HDA_CODEC_REALTEK is not set # CONFIG_SND_HDA_CODEC_ANALOG is not set CONFIG_SND_HDA_CODEC_SIGMATEL=y # CONFIG_SND_HDA_CODEC_VIA is not set CONFIG_SND_HDA_CODEC_HDMI=y # CONFIG_SND_HDA_CODEC_CIRRUS is not set CONFIG_SND_HDA_CODEC_CS8409=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CA0132=y # CONFIG_SND_HDA_CODEC_CA0132_DSP is not set CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y # end of HD-Audio CONFIG_SND_HDA_CORE=y CONFIG_SND_HDA_COMPONENT=y CONFIG_SND_HDA_EXT_CORE=y CONFIG_SND_HDA_PREALLOC_SIZE=64 # CONFIG_SND_SPI is not set CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y CONFIG_SND_USB_UA101=y # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_USB_US122L is not set CONFIG_SND_USB_6FIRE=y CONFIG_SND_USB_HIFACE=y CONFIG_SND_BCD2000=y CONFIG_SND_USB_LINE6=y CONFIG_SND_USB_POD=y # CONFIG_SND_USB_PODHD is not set CONFIG_SND_USB_TONEPORT=y # CONFIG_SND_USB_VARIAX is not set # CONFIG_SND_FIREWIRE is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y CONFIG_SND_SOC_COMPRESS=y CONFIG_SND_SOC_UTILS_KUNIT_TEST=y CONFIG_SND_SOC_ADI=y CONFIG_SND_SOC_ADI_AXI_I2S=y CONFIG_SND_SOC_ADI_AXI_SPDIF=y CONFIG_SND_SOC_AMD_ACP=y CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=y # CONFIG_SND_AMD_ACP_CONFIG is not set # CONFIG_SND_SOC_APPLE_MCA is not set # CONFIG_SND_ATMEL_SOC is not set # CONFIG_SND_BCM2835_SOC_I2S is not set # CONFIG_SND_SOC_CYGNUS is not set # CONFIG_SND_BCM63XX_I2S_WHISTLER is not set # CONFIG_SND_EP93XX_SOC is not set CONFIG_SND_DESIGNWARE_I2S=y # CONFIG_SND_DESIGNWARE_PCM is not set # # SoC Audio for Freescale CPUs # # # Common SoC Audio options for Freescale CPUs: # CONFIG_SND_SOC_FSL_ASRC=y CONFIG_SND_SOC_FSL_SAI=y CONFIG_SND_SOC_FSL_MQS=y CONFIG_SND_SOC_FSL_AUDMIX=y # CONFIG_SND_SOC_FSL_SSI is not set CONFIG_SND_SOC_FSL_SPDIF=y CONFIG_SND_SOC_FSL_ESAI=y CONFIG_SND_SOC_FSL_MICFIL=y # CONFIG_SND_SOC_FSL_EASRC is not set CONFIG_SND_SOC_FSL_XCVR=y # CONFIG_SND_SOC_FSL_AUD2HTX is not set CONFIG_SND_SOC_FSL_UTILS=y # CONFIG_SND_SOC_IMX_AUDMUX is not set # CONFIG_SND_IMX_SOC is not set # end of SoC Audio for Freescale CPUs CONFIG_SND_I2S_HI6210_I2S=y # CONFIG_SND_JZ4740_SOC_I2S is not set # CONFIG_SND_KIRKWOOD_SOC is not set CONFIG_SND_SOC_IMG=y CONFIG_SND_SOC_IMG_I2S_IN=y CONFIG_SND_SOC_IMG_I2S_OUT=y # CONFIG_SND_SOC_IMG_PARALLEL_OUT is not set CONFIG_SND_SOC_IMG_SPDIF_IN=y # CONFIG_SND_SOC_IMG_SPDIF_OUT is not set CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y # CONFIG_SND_SOC_INTEL_KEEMBAY is not set # CONFIG_SND_SOC_INTEL_AVS is not set CONFIG_SND_SOC_INTEL_MACH=y # CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set # CONFIG_SND_SOC_MT8186 is not set CONFIG_SND_SOC_MTK_BTCVSD=y # CONFIG_SND_SOC_MT8195 is not set # # ASoC support for Amlogic platforms # # CONFIG_SND_MESON_AIU is not set # CONFIG_SND_MESON_AXG_FRDDR is not set # CONFIG_SND_MESON_AXG_TODDR is not set # CONFIG_SND_MESON_AXG_TDMIN is not set # CONFIG_SND_MESON_AXG_TDMOUT is not set # CONFIG_SND_MESON_AXG_SOUND_CARD is not set # CONFIG_SND_MESON_AXG_SPDIFOUT is not set # CONFIG_SND_MESON_AXG_SPDIFIN is not set # CONFIG_SND_MESON_AXG_PDM is not set # CONFIG_SND_MESON_GX_SOUND_CARD is not set # CONFIG_SND_MESON_G12A_TOACODEC is not set # CONFIG_SND_MESON_G12A_TOHDMITX is not set # CONFIG_SND_SOC_MESON_T9015 is not set # end of ASoC support for Amlogic platforms # CONFIG_SND_MXS_SOC is not set # CONFIG_SND_PXA2XX_SOC is not set # CONFIG_SND_SOC_QCOM is not set # CONFIG_SND_SOC_ROCKCHIP is not set # CONFIG_SND_SOC_SAMSUNG is not set # # SoC Audio support for Renesas SoCs # # CONFIG_SND_SOC_SH4_FSI is not set # CONFIG_SND_SOC_RCAR is not set # CONFIG_SND_SOC_RZ is not set # end of SoC Audio support for Renesas SoCs # CONFIG_SND_SOC_SOF_TOPLEVEL is not set # CONFIG_SND_SOC_SPRD is not set # CONFIG_SND_SOC_STI is not set # # STMicroelectronics STM32 SOC audio support # # CONFIG_SND_SOC_STM32_SAI is not set # CONFIG_SND_SOC_STM32_I2S is not set # CONFIG_SND_SOC_STM32_SPDIFRX is not set # end of STMicroelectronics STM32 SOC audio support # # Allwinner SoC Audio support # # CONFIG_SND_SUN4I_CODEC is not set # CONFIG_SND_SUN8I_CODEC is not set # CONFIG_SND_SUN8I_CODEC_ANALOG is not set # CONFIG_SND_SUN50I_CODEC_ANALOG is not set # CONFIG_SND_SUN4I_I2S is not set # CONFIG_SND_SUN4I_SPDIF is not set # CONFIG_SND_SUN50I_DMIC is not set # end of Allwinner SoC Audio support # CONFIG_SND_SOC_TEGRA is not set # # Audio support for Texas Instruments SoCs # # # Texas Instruments DAI support for: # # CONFIG_SND_SOC_DAVINCI_ASP is not set # CONFIG_SND_SOC_DAVINCI_MCASP is not set # CONFIG_SND_SOC_DAVINCI_VCIF is not set # CONFIG_SND_SOC_OMAP_DMIC is not set # CONFIG_SND_SOC_OMAP_MCBSP is not set # CONFIG_SND_SOC_OMAP_MCPDM is not set # # Audio support for boards with Texas Instruments SoCs # # CONFIG_SND_SOC_OMAP3_TWL4030 is not set # CONFIG_SND_SOC_OMAP_ABE_TWL6040 is not set # CONFIG_SND_SOC_OMAP_HDMI is not set # CONFIG_SND_SOC_J721E_EVM is not set # end of Audio support for Texas Instruments SoCs # CONFIG_SND_SOC_UNIPHIER is not set CONFIG_SND_SOC_XILINX_I2S=y CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y # CONFIG_SND_SOC_XILINX_SPDIF is not set CONFIG_SND_SOC_XTFPGA_I2S=y CONFIG_SND_SOC_I2C_AND_SPI=y # # CODEC drivers # # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_WM_ADSP=y CONFIG_SND_SOC_AC97_CODEC=y CONFIG_SND_SOC_ADAU_UTILS=y CONFIG_SND_SOC_ADAU1372=y CONFIG_SND_SOC_ADAU1372_I2C=y CONFIG_SND_SOC_ADAU1372_SPI=y CONFIG_SND_SOC_ADAU1701=y CONFIG_SND_SOC_ADAU17X1=y CONFIG_SND_SOC_ADAU1761=y CONFIG_SND_SOC_ADAU1761_I2C=y CONFIG_SND_SOC_ADAU1761_SPI=y # CONFIG_SND_SOC_ADAU7002 is not set CONFIG_SND_SOC_ADAU7118=y CONFIG_SND_SOC_ADAU7118_HW=y CONFIG_SND_SOC_ADAU7118_I2C=y CONFIG_SND_SOC_AK4104=y CONFIG_SND_SOC_AK4118=y # CONFIG_SND_SOC_AK4375 is not set CONFIG_SND_SOC_AK4458=y CONFIG_SND_SOC_AK4554=y # CONFIG_SND_SOC_AK4613 is not set CONFIG_SND_SOC_AK4642=y CONFIG_SND_SOC_AK5386=y CONFIG_SND_SOC_AK5558=y # CONFIG_SND_SOC_ALC5623 is not set # CONFIG_SND_SOC_AW8738 is not set CONFIG_SND_SOC_BD28623=y CONFIG_SND_SOC_BT_SCO=y # CONFIG_SND_SOC_CPCAP is not set # CONFIG_SND_SOC_CS35L32 is not set CONFIG_SND_SOC_CS35L33=y # CONFIG_SND_SOC_CS35L34 is not set CONFIG_SND_SOC_CS35L35=y # CONFIG_SND_SOC_CS35L36 is not set CONFIG_SND_SOC_CS35L41_LIB=y CONFIG_SND_SOC_CS35L41=y CONFIG_SND_SOC_CS35L41_SPI=y CONFIG_SND_SOC_CS35L41_I2C=y CONFIG_SND_SOC_CS35L45_TABLES=y CONFIG_SND_SOC_CS35L45=y CONFIG_SND_SOC_CS35L45_SPI=y CONFIG_SND_SOC_CS35L45_I2C=y CONFIG_SND_SOC_CS42L42_CORE=y CONFIG_SND_SOC_CS42L42=y # CONFIG_SND_SOC_CS42L51_I2C is not set CONFIG_SND_SOC_CS42L73=y # CONFIG_SND_SOC_CS42L83 is not set CONFIG_SND_SOC_CS4234=y CONFIG_SND_SOC_CS4265=y CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4271=y # CONFIG_SND_SOC_CS4271_I2C is not set CONFIG_SND_SOC_CS4271_SPI=y # CONFIG_SND_SOC_CS42XX8_I2C is not set CONFIG_SND_SOC_CS43130=y # CONFIG_SND_SOC_CS4341 is not set CONFIG_SND_SOC_CS4349=y CONFIG_SND_SOC_CS53L30=y CONFIG_SND_SOC_CX2072X=y # CONFIG_SND_SOC_JZ4740_CODEC is not set # CONFIG_SND_SOC_JZ4725B_CODEC is not set # CONFIG_SND_SOC_JZ4760_CODEC is not set # CONFIG_SND_SOC_JZ4770_CODEC is not set CONFIG_SND_SOC_DA7213=y # CONFIG_SND_SOC_DMIC is not set CONFIG_SND_SOC_HDMI_CODEC=y CONFIG_SND_SOC_ES7134=y CONFIG_SND_SOC_ES7241=y CONFIG_SND_SOC_ES8316=y CONFIG_SND_SOC_ES8326=y # CONFIG_SND_SOC_ES8328_I2C is not set # CONFIG_SND_SOC_ES8328_SPI is not set # CONFIG_SND_SOC_GTM601 is not set CONFIG_SND_SOC_HDA=y CONFIG_SND_SOC_ICS43432=y # CONFIG_SND_SOC_INNO_RK3036 is not set CONFIG_SND_SOC_LOCHNAGAR_SC=y CONFIG_SND_SOC_MAX98088=y CONFIG_SND_SOC_MAX98357A=y CONFIG_SND_SOC_MAX98504=y CONFIG_SND_SOC_MAX9867=y CONFIG_SND_SOC_MAX98927=y CONFIG_SND_SOC_MAX98520=y CONFIG_SND_SOC_MAX98373=y CONFIG_SND_SOC_MAX98373_I2C=y CONFIG_SND_SOC_MAX98390=y CONFIG_SND_SOC_MAX98396=y # CONFIG_SND_SOC_MAX9860 is not set CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=y CONFIG_SND_SOC_PCM1681=y CONFIG_SND_SOC_PCM1789=y CONFIG_SND_SOC_PCM1789_I2C=y CONFIG_SND_SOC_PCM179X=y CONFIG_SND_SOC_PCM179X_I2C=y CONFIG_SND_SOC_PCM179X_SPI=y # CONFIG_SND_SOC_PCM186X_I2C is not set # CONFIG_SND_SOC_PCM186X_SPI is not set CONFIG_SND_SOC_PCM3060=y CONFIG_SND_SOC_PCM3060_I2C=y CONFIG_SND_SOC_PCM3060_SPI=y CONFIG_SND_SOC_PCM3168A=y CONFIG_SND_SOC_PCM3168A_I2C=y CONFIG_SND_SOC_PCM3168A_SPI=y # CONFIG_SND_SOC_PCM5102A is not set CONFIG_SND_SOC_PCM512x=y CONFIG_SND_SOC_PCM512x_I2C=y CONFIG_SND_SOC_PCM512x_SPI=y # CONFIG_SND_SOC_RK3328 is not set # CONFIG_SND_SOC_RK817 is not set CONFIG_SND_SOC_RL6231=y # CONFIG_SND_SOC_RT5616 is not set CONFIG_SND_SOC_RT5631=y # CONFIG_SND_SOC_RT5640 is not set CONFIG_SND_SOC_RT5645=y CONFIG_SND_SOC_RT5659=y # CONFIG_SND_SOC_RT9120 is not set CONFIG_SND_SOC_SGTL5000=y CONFIG_SND_SOC_SI476X=y CONFIG_SND_SOC_SIGMADSP=y CONFIG_SND_SOC_SIGMADSP_I2C=y CONFIG_SND_SOC_SIGMADSP_REGMAP=y # CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set # CONFIG_SND_SOC_SIMPLE_MUX is not set CONFIG_SND_SOC_SPDIF=y # CONFIG_SND_SOC_SRC4XXX_I2C is not set CONFIG_SND_SOC_SSM2305=y # CONFIG_SND_SOC_SSM2518 is not set # CONFIG_SND_SOC_SSM2602_SPI is not set # CONFIG_SND_SOC_SSM2602_I2C is not set # CONFIG_SND_SOC_SSM4567 is not set CONFIG_SND_SOC_STA32X=y CONFIG_SND_SOC_STA350=y # CONFIG_SND_SOC_STI_SAS is not set CONFIG_SND_SOC_TAS2552=y CONFIG_SND_SOC_TAS2562=y CONFIG_SND_SOC_TAS2764=y # CONFIG_SND_SOC_TAS2770 is not set CONFIG_SND_SOC_TAS2780=y # CONFIG_SND_SOC_TAS5086 is not set CONFIG_SND_SOC_TAS571X=y CONFIG_SND_SOC_TAS5720=y CONFIG_SND_SOC_TAS5805M=y CONFIG_SND_SOC_TAS6424=y CONFIG_SND_SOC_TDA7419=y CONFIG_SND_SOC_TFA9879=y CONFIG_SND_SOC_TFA989X=y CONFIG_SND_SOC_TLV320ADC3XXX=y CONFIG_SND_SOC_TLV320AIC23=y CONFIG_SND_SOC_TLV320AIC23_I2C=y CONFIG_SND_SOC_TLV320AIC23_SPI=y CONFIG_SND_SOC_TLV320AIC31XX=y # CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set # CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set CONFIG_SND_SOC_TLV320AIC3X=y # CONFIG_SND_SOC_TLV320AIC3X_I2C is not set CONFIG_SND_SOC_TLV320AIC3X_SPI=y CONFIG_SND_SOC_TLV320ADCX140=y # CONFIG_SND_SOC_TS3A227E is not set # CONFIG_SND_SOC_TSCS42XX is not set CONFIG_SND_SOC_TSCS454=y CONFIG_SND_SOC_UDA1334=y CONFIG_SND_SOC_WM8510=y # CONFIG_SND_SOC_WM8523 is not set # CONFIG_SND_SOC_WM8524 is not set CONFIG_SND_SOC_WM8580=y # CONFIG_SND_SOC_WM8711 is not set CONFIG_SND_SOC_WM8728=y # CONFIG_SND_SOC_WM8731_I2C is not set # CONFIG_SND_SOC_WM8731_SPI is not set CONFIG_SND_SOC_WM8737=y # CONFIG_SND_SOC_WM8741 is not set CONFIG_SND_SOC_WM8750=y CONFIG_SND_SOC_WM8753=y CONFIG_SND_SOC_WM8770=y CONFIG_SND_SOC_WM8776=y CONFIG_SND_SOC_WM8782=y CONFIG_SND_SOC_WM8804=y CONFIG_SND_SOC_WM8804_I2C=y CONFIG_SND_SOC_WM8804_SPI=y CONFIG_SND_SOC_WM8903=y # CONFIG_SND_SOC_WM8904 is not set CONFIG_SND_SOC_WM8940=y CONFIG_SND_SOC_WM8960=y CONFIG_SND_SOC_WM8974=y CONFIG_SND_SOC_WM8978=y CONFIG_SND_SOC_WM8985=y CONFIG_SND_SOC_ZL38060=y CONFIG_SND_SOC_MAX9759=y CONFIG_SND_SOC_MT6351=y CONFIG_SND_SOC_MT6358=y CONFIG_SND_SOC_MT6660=y CONFIG_SND_SOC_NAU8315=y CONFIG_SND_SOC_NAU8540=y # CONFIG_SND_SOC_NAU8810 is not set CONFIG_SND_SOC_NAU8821=y # CONFIG_SND_SOC_NAU8822 is not set CONFIG_SND_SOC_NAU8824=y CONFIG_SND_SOC_TPA6130A2=y CONFIG_SND_SOC_LPASS_MACRO_COMMON=y CONFIG_SND_SOC_LPASS_WSA_MACRO=y # CONFIG_SND_SOC_LPASS_VA_MACRO is not set CONFIG_SND_SOC_LPASS_RX_MACRO=y CONFIG_SND_SOC_LPASS_TX_MACRO=y # end of CODEC drivers CONFIG_SND_SIMPLE_CARD_UTILS=y # CONFIG_SND_SIMPLE_CARD is not set CONFIG_SND_AUDIO_GRAPH_CARD=y CONFIG_SND_AUDIO_GRAPH_CARD2=y # CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE is not set CONFIG_SND_TEST_COMPONENT=y # CONFIG_SND_VIRTIO is not set CONFIG_AC97_BUS=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_LED_TRIG=y CONFIG_USB_ULPI_BUS=y CONFIG_USB_CONN_GPIO=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_PCI=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y CONFIG_USB_FEW_INIT_RETRIES=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG_PRODUCTLIST is not set CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y CONFIG_USB_LEDS_TRIGGER_USBPORT=y CONFIG_USB_AUTOSUSPEND_DELAY=2 # CONFIG_USB_MON is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PCI=y CONFIG_USB_XHCI_PCI_RENESAS=y CONFIG_USB_XHCI_PLATFORM=y # CONFIG_USB_XHCI_HISTB is not set # CONFIG_USB_XHCI_MTK is not set # CONFIG_USB_XHCI_MVEBU is not set # CONFIG_USB_XHCI_RCAR is not set # CONFIG_USB_BRCMSTB is not set # CONFIG_USB_EHCI_HCD is not set CONFIG_USB_OXU210HP_HCD=y CONFIG_USB_ISP116X_HCD=y # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_FOTG210_HCD is not set CONFIG_USB_MAX3421_HCD=y # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y CONFIG_USB_SL811_HCD_ISO=y CONFIG_USB_R8A66597_HCD=y # CONFIG_USB_HCD_SSB is not set CONFIG_USB_HCD_TEST_MODE=y # CONFIG_USB_RENESAS_USBHS is not set # # USB Device Class drivers # CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set CONFIG_USB_TMC=y # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # # # USB Imaging devices # # CONFIG_USB_MDC800 is not set CONFIG_USBIP_CORE=y CONFIG_USBIP_VHCI_HCD=y CONFIG_USBIP_VHCI_HC_PORTS=8 CONFIG_USBIP_VHCI_NR_HCS=1 # CONFIG_USBIP_HOST is not set CONFIG_USBIP_VUDC=y # CONFIG_USBIP_DEBUG is not set CONFIG_USB_CDNS_SUPPORT=y CONFIG_USB_CDNS3=y # CONFIG_USB_CDNS3_GADGET is not set # CONFIG_USB_CDNS3_HOST is not set CONFIG_USB_CDNS3_TI=y CONFIG_USB_CDNS3_IMX=y # CONFIG_USB_MTU3 is not set # CONFIG_USB_MUSB_HDRC is not set CONFIG_USB_DWC3=y CONFIG_USB_DWC3_ULPI=y CONFIG_USB_DWC3_HOST=y # CONFIG_USB_DWC3_GADGET is not set # CONFIG_USB_DWC3_DUAL_ROLE is not set # # Platform Glue Driver Support # CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_EXYNOS=y # CONFIG_USB_DWC3_HAPS is not set CONFIG_USB_DWC3_KEYSTONE=y CONFIG_USB_DWC3_MESON_G12A=y CONFIG_USB_DWC3_OF_SIMPLE=y CONFIG_USB_DWC3_ST=y CONFIG_USB_DWC3_QCOM=y CONFIG_USB_DWC3_IMX8MP=y CONFIG_USB_DWC3_AM62=y CONFIG_USB_DWC2=y # CONFIG_USB_DWC2_HOST is not set # # Gadget/Dual-role mode requires USB Gadget support to be enabled # CONFIG_USB_DWC2_PERIPHERAL=y # CONFIG_USB_DWC2_DUAL_ROLE is not set # CONFIG_USB_DWC2_PCI is not set CONFIG_USB_DWC2_DEBUG=y CONFIG_USB_DWC2_VERBOSE=y # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set # CONFIG_USB_DWC2_DEBUG_PERIODIC is not set # CONFIG_USB_CHIPIDEA is not set # CONFIG_USB_ISP1760 is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Miscellaneous drivers # CONFIG_USB_EMI62=y CONFIG_USB_EMI26=y CONFIG_USB_ADUTUX=y # CONFIG_USB_SEVSEG is not set CONFIG_USB_LEGOTOWER=y CONFIG_USB_LCD=y CONFIG_USB_CYPRESS_CY7C63=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set CONFIG_USB_APPLEDISPLAY=y # CONFIG_USB_QCOM_EUD is not set CONFIG_APPLE_MFI_FASTCHARGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set CONFIG_USB_ISIGHTFW=y # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set CONFIG_USB_HUB_USB251XB=y # CONFIG_USB_HSIC_USB3503 is not set # CONFIG_USB_HSIC_USB4604 is not set # CONFIG_USB_LINK_LAYER_TEST is not set CONFIG_USB_CHAOSKEY=y # CONFIG_BRCM_USB_PINMAP is not set # CONFIG_USB_ONBOARD_HUB is not set CONFIG_USB_ATM=y CONFIG_USB_SPEEDTOUCH=y CONFIG_USB_CXACRU=y CONFIG_USB_UEAGLEATM=y CONFIG_USB_XUSBATM=y # # USB Physical Layer drivers # CONFIG_USB_PHY=y # CONFIG_KEYSTONE_USB_PHY is not set CONFIG_NOP_USB_XCEIV=y # CONFIG_AM335X_PHY_USB is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_TAHVO_USB is not set CONFIG_USB_ISP1301=y # CONFIG_USB_TEGRA_PHY is not set # CONFIG_USB_ULPI is not set # CONFIG_JZ4770_PHY is not set # end of USB Physical Layer drivers CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y # CONFIG_USB_GADGET_VERBOSE is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 # # USB Peripheral Controller # # CONFIG_USB_LPC32XX is not set # CONFIG_USB_FUSB300 is not set # CONFIG_USB_FOTG210_UDC is not set CONFIG_USB_GR_UDC=y CONFIG_USB_R8A66597=y # CONFIG_USB_RENESAS_USB3 is not set # CONFIG_USB_PXA27X is not set CONFIG_USB_MV_UDC=y CONFIG_USB_MV_U3D=y CONFIG_USB_SNP_CORE=y CONFIG_USB_SNP_UDC_PLAT=y CONFIG_USB_M66592=y CONFIG_USB_BDC_UDC=y CONFIG_USB_AMD5536UDC=y # CONFIG_USB_NET2272 is not set CONFIG_USB_NET2280=y # CONFIG_USB_GOKU is not set CONFIG_USB_EG20T=y # CONFIG_USB_GADGET_XILINX is not set CONFIG_USB_MAX3420_UDC=y # CONFIG_USB_ASPEED_UDC is not set # CONFIG_USB_ASPEED_VHUB is not set CONFIG_USB_DUMMY_HCD=y # end of USB Peripheral Controller CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_F_SS_LB=y CONFIG_USB_U_ETHER=y CONFIG_USB_F_ECM=y CONFIG_USB_F_SUBSET=y CONFIG_USB_F_RNDIS=y CONFIG_USB_F_FS=y CONFIG_USB_F_UAC1_LEGACY=y CONFIG_USB_F_UVC=y CONFIG_USB_F_HID=y CONFIG_USB_F_TCM=y # CONFIG_USB_CONFIGFS is not set # # USB Gadget precomposed configurations # CONFIG_USB_ZERO=y CONFIG_USB_AUDIO=y CONFIG_GADGET_UAC1=y CONFIG_GADGET_UAC1_LEGACY=y CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_ETH_EEM is not set # CONFIG_USB_G_NCM is not set # CONFIG_USB_GADGETFS is not set CONFIG_USB_FUNCTIONFS=y CONFIG_USB_FUNCTIONFS_ETH=y # CONFIG_USB_FUNCTIONFS_RNDIS is not set CONFIG_USB_FUNCTIONFS_GENERIC=y # CONFIG_USB_MASS_STORAGE is not set CONFIG_USB_GADGET_TARGET=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set CONFIG_USB_G_HID=y CONFIG_USB_G_WEBCAM=y CONFIG_USB_RAW_GADGET=y # end of USB Gadget precomposed configurations CONFIG_TYPEC=y # CONFIG_TYPEC_TCPM is not set # CONFIG_TYPEC_TPS6598X is not set # CONFIG_TYPEC_ANX7411 is not set CONFIG_TYPEC_RT1719=y CONFIG_TYPEC_HD3SS3220=y CONFIG_TYPEC_STUSB160X=y # CONFIG_TYPEC_QCOM_PMIC is not set CONFIG_TYPEC_WUSB3801=y # # USB Type-C Multiplexer/DeMultiplexer Switch support # # CONFIG_TYPEC_MUX_FSA4480 is not set # CONFIG_TYPEC_MUX_PI3USB30532 is not set # end of USB Type-C Multiplexer/DeMultiplexer Switch support # # USB Type-C Alternate Mode drivers # CONFIG_TYPEC_DP_ALTMODE=y CONFIG_TYPEC_NVIDIA_ALTMODE=y # end of USB Type-C Alternate Mode drivers CONFIG_USB_ROLE_SWITCH=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y CONFIG_LEDS_CLASS_MULTICOLOR=y # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set # # LED drivers # CONFIG_LEDS_AN30259A=y # CONFIG_LEDS_ARIEL is not set CONFIG_LEDS_AW2013=y # CONFIG_LEDS_BCM6328 is not set CONFIG_LEDS_BCM6358=y CONFIG_LEDS_CR0014114=y CONFIG_LEDS_EL15203000=y # CONFIG_LEDS_TURRIS_OMNIA is not set CONFIG_LEDS_LM3530=y CONFIG_LEDS_LM3532=y # CONFIG_LEDS_LM3642 is not set CONFIG_LEDS_LM3692X=y # CONFIG_LEDS_S3C24XX is not set # CONFIG_LEDS_COBALT_QUBE is not set # CONFIG_LEDS_COBALT_RAQ is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_LP3944=y # CONFIG_LEDS_LP3952 is not set CONFIG_LEDS_LP50XX=y # CONFIG_LEDS_LP55XX_COMMON is not set CONFIG_LEDS_LP8860=y # CONFIG_LEDS_PCA955X is not set CONFIG_LEDS_PCA963X=y # CONFIG_LEDS_WM831X_STATUS is not set CONFIG_LEDS_WM8350=y CONFIG_LEDS_DA9052=y CONFIG_LEDS_DAC124S085=y # CONFIG_LEDS_PWM is not set # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set CONFIG_LEDS_LT3593=y CONFIG_LEDS_ADP5520=y CONFIG_LEDS_MC13783=y CONFIG_LEDS_NS2=y CONFIG_LEDS_NETXBIG=y # CONFIG_LEDS_TCA6507 is not set CONFIG_LEDS_TLC591XX=y # CONFIG_LEDS_MAX77650 is not set CONFIG_LEDS_MAX8997=y CONFIG_LEDS_LM355x=y # CONFIG_LEDS_OT200 is not set CONFIG_LEDS_MENF21BMC=y # CONFIG_LEDS_IS31FL319X is not set CONFIG_LEDS_IS31FL32XX=y # # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) # CONFIG_LEDS_BLINKM=y # CONFIG_LEDS_SYSCON is not set CONFIG_LEDS_MLXREG=y # CONFIG_LEDS_USER is not set CONFIG_LEDS_SPI_BYTE=y CONFIG_LEDS_TI_LMU_COMMON=y # CONFIG_LEDS_LM3697 is not set # CONFIG_LEDS_TPS6105X is not set # CONFIG_LEDS_IP30 is not set # CONFIG_LEDS_BCM63138 is not set # CONFIG_LEDS_LGM is not set # # Flash and Torch LED drivers # # CONFIG_LEDS_AAT1290 is not set CONFIG_LEDS_AS3645A=y CONFIG_LEDS_KTD2692=y CONFIG_LEDS_LM3601X=y CONFIG_LEDS_MAX77693=y # CONFIG_LEDS_MT6360 is not set CONFIG_LEDS_RT4505=y # CONFIG_LEDS_RT8515 is not set # CONFIG_LEDS_SGM3140 is not set # # RGB LED drivers # CONFIG_LEDS_PWM_MULTICOLOR=y CONFIG_LEDS_QCOM_LPG=y # # LED Triggers # CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_ONESHOT is not set CONFIG_LEDS_TRIGGER_MTD=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_LEDS_TRIGGER_ACTIVITY=y # CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=y # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_LEDS_TRIGGER_NETDEV is not set CONFIG_LEDS_TRIGGER_PATTERN=y CONFIG_LEDS_TRIGGER_AUDIO=y # # Simple LED drivers # CONFIG_ACCESSIBILITY=y # # Speakup console speech # # end of Speakup console speech # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # # DMABUF options # CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_UDMABUF is not set CONFIG_DMABUF_MOVE_NOTIFY=y # CONFIG_DMABUF_DEBUG is not set CONFIG_DMABUF_SELFTESTS=y CONFIG_DMABUF_HEAPS=y # CONFIG_DMABUF_SYSFS_STATS is not set # CONFIG_DMABUF_HEAPS_SYSTEM is not set # end of DMABUF options # CONFIG_AUXDISPLAY is not set # CONFIG_PANEL is not set # CONFIG_UIO is not set # CONFIG_VFIO is not set # CONFIG_VIRT_DRIVERS is not set CONFIG_VIRTIO_ANCHOR=y CONFIG_VIRTIO=y # CONFIG_VIRTIO_MENU is not set CONFIG_VDPA=y CONFIG_VDPA_SIM=y CONFIG_VDPA_SIM_NET=y CONFIG_VDPA_SIM_BLOCK=y CONFIG_VDPA_USER=y CONFIG_IFCVF=y # CONFIG_VP_VDPA is not set CONFIG_VHOST_IOTLB=y CONFIG_VHOST_RING=y # CONFIG_VHOST_MENU is not set # # Microsoft Hyper-V guest support # # end of Microsoft Hyper-V guest support CONFIG_GREYBUS=y CONFIG_GREYBUS_ES2=y CONFIG_COMEDI=y CONFIG_COMEDI_DEBUG=y CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048 CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480 CONFIG_COMEDI_MISC_DRIVERS=y CONFIG_COMEDI_BOND=y # CONFIG_COMEDI_TEST is not set CONFIG_COMEDI_PARPORT=y # CONFIG_COMEDI_SSV_DNP is not set CONFIG_COMEDI_ISA_DRIVERS=y CONFIG_COMEDI_PCL711=y CONFIG_COMEDI_PCL724=y # CONFIG_COMEDI_PCL726 is not set CONFIG_COMEDI_PCL730=y CONFIG_COMEDI_PCL812=y CONFIG_COMEDI_PCL816=y # CONFIG_COMEDI_PCL818 is not set CONFIG_COMEDI_PCM3724=y CONFIG_COMEDI_AMPLC_DIO200_ISA=y CONFIG_COMEDI_AMPLC_PC236_ISA=y CONFIG_COMEDI_AMPLC_PC263_ISA=y CONFIG_COMEDI_RTI800=y CONFIG_COMEDI_RTI802=y CONFIG_COMEDI_DAC02=y CONFIG_COMEDI_DAS16M1=y CONFIG_COMEDI_DAS08_ISA=y # CONFIG_COMEDI_DAS16 is not set CONFIG_COMEDI_DAS800=y CONFIG_COMEDI_DAS1800=y CONFIG_COMEDI_DAS6402=y CONFIG_COMEDI_DT2801=y CONFIG_COMEDI_DT2811=y CONFIG_COMEDI_DT2814=y CONFIG_COMEDI_DT2815=y # CONFIG_COMEDI_DT2817 is not set CONFIG_COMEDI_DT282X=y # CONFIG_COMEDI_DMM32AT is not set # CONFIG_COMEDI_FL512 is not set CONFIG_COMEDI_AIO_AIO12_8=y CONFIG_COMEDI_AIO_IIRO_16=y CONFIG_COMEDI_II_PCI20KC=y CONFIG_COMEDI_C6XDIGIO=y CONFIG_COMEDI_MPC624=y CONFIG_COMEDI_ADQ12B=y CONFIG_COMEDI_NI_AT_A2150=y CONFIG_COMEDI_NI_AT_AO=y # CONFIG_COMEDI_NI_ATMIO is not set CONFIG_COMEDI_NI_ATMIO16D=y CONFIG_COMEDI_NI_LABPC_ISA=y CONFIG_COMEDI_PCMAD=y # CONFIG_COMEDI_PCMDA12 is not set # CONFIG_COMEDI_PCMMIO is not set CONFIG_COMEDI_PCMUIO=y CONFIG_COMEDI_MULTIQ3=y # CONFIG_COMEDI_S526 is not set CONFIG_COMEDI_PCI_DRIVERS=y # CONFIG_COMEDI_8255_PCI is not set CONFIG_COMEDI_ADDI_WATCHDOG=y CONFIG_COMEDI_ADDI_APCI_1032=y # CONFIG_COMEDI_ADDI_APCI_1500 is not set CONFIG_COMEDI_ADDI_APCI_1516=y # CONFIG_COMEDI_ADDI_APCI_1564 is not set CONFIG_COMEDI_ADDI_APCI_16XX=y CONFIG_COMEDI_ADDI_APCI_2032=y CONFIG_COMEDI_ADDI_APCI_2200=y CONFIG_COMEDI_ADDI_APCI_3120=y # CONFIG_COMEDI_ADDI_APCI_3501 is not set CONFIG_COMEDI_ADDI_APCI_3XXX=y # CONFIG_COMEDI_ADL_PCI6208 is not set CONFIG_COMEDI_ADL_PCI7X3X=y # CONFIG_COMEDI_ADL_PCI8164 is not set CONFIG_COMEDI_ADL_PCI9111=y CONFIG_COMEDI_ADL_PCI9118=y CONFIG_COMEDI_ADV_PCI1710=y CONFIG_COMEDI_ADV_PCI1720=y CONFIG_COMEDI_ADV_PCI1723=y CONFIG_COMEDI_ADV_PCI1724=y # CONFIG_COMEDI_ADV_PCI1760 is not set CONFIG_COMEDI_ADV_PCI_DIO=y CONFIG_COMEDI_AMPLC_DIO200_PCI=y # CONFIG_COMEDI_AMPLC_PC236_PCI is not set # CONFIG_COMEDI_AMPLC_PC263_PCI is not set # CONFIG_COMEDI_AMPLC_PCI224 is not set CONFIG_COMEDI_AMPLC_PCI230=y CONFIG_COMEDI_CONTEC_PCI_DIO=y # CONFIG_COMEDI_DAS08_PCI is not set CONFIG_COMEDI_DT3000=y CONFIG_COMEDI_DYNA_PCI10XX=y # CONFIG_COMEDI_GSC_HPDI is not set # CONFIG_COMEDI_MF6X4 is not set # CONFIG_COMEDI_ICP_MULTI is not set CONFIG_COMEDI_DAQBOARD2000=y # CONFIG_COMEDI_JR3_PCI is not set # CONFIG_COMEDI_KE_COUNTER is not set # CONFIG_COMEDI_CB_PCIDAS64 is not set # CONFIG_COMEDI_CB_PCIDAS is not set CONFIG_COMEDI_CB_PCIDDA=y CONFIG_COMEDI_CB_PCIMDAS=y # CONFIG_COMEDI_CB_PCIMDDA is not set CONFIG_COMEDI_ME4000=y CONFIG_COMEDI_ME_DAQ=y # CONFIG_COMEDI_NI_6527 is not set CONFIG_COMEDI_NI_65XX=y # CONFIG_COMEDI_NI_660X is not set # CONFIG_COMEDI_NI_670X is not set # CONFIG_COMEDI_NI_LABPC_PCI is not set CONFIG_COMEDI_NI_PCIDIO=y # CONFIG_COMEDI_NI_PCIMIO is not set # CONFIG_COMEDI_RTD520 is not set CONFIG_COMEDI_S626=y CONFIG_COMEDI_MITE=y # CONFIG_COMEDI_USB_DRIVERS is not set CONFIG_COMEDI_8254=y CONFIG_COMEDI_8255=y CONFIG_COMEDI_8255_SA=y CONFIG_COMEDI_KCOMEDILIB=y CONFIG_COMEDI_AMPLC_DIO200=y CONFIG_COMEDI_AMPLC_PC236=y CONFIG_COMEDI_DAS08=y CONFIG_COMEDI_NI_LABPC=y CONFIG_COMEDI_NI_ROUTING=y CONFIG_COMEDI_TESTS=y # CONFIG_COMEDI_TESTS_EXAMPLE is not set CONFIG_COMEDI_TESTS_NI_ROUTES=y # CONFIG_STAGING is not set # CONFIG_GOLDFISH is not set # CONFIG_CHROME_PLATFORMS is not set # CONFIG_MELLANOX_PLATFORM is not set # CONFIG_OLPC_XO175 is not set CONFIG_SURFACE_PLATFORMS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # CONFIG_COMMON_CLK_WM831X is not set # # Clock driver for ARM Reference designs # # CONFIG_CLK_ICST is not set # CONFIG_CLK_SP810 is not set # end of Clock driver for ARM Reference designs # CONFIG_CLK_HSDK is not set CONFIG_LMK04832=y # CONFIG_COMMON_CLK_APPLE_NCO is not set # CONFIG_COMMON_CLK_MAX77686 is not set CONFIG_COMMON_CLK_MAX9485=y # CONFIG_COMMON_CLK_HI655X is not set # CONFIG_COMMON_CLK_SCMI is not set # CONFIG_COMMON_CLK_SCPI is not set CONFIG_COMMON_CLK_SI5341=y CONFIG_COMMON_CLK_SI5351=y CONFIG_COMMON_CLK_SI514=y CONFIG_COMMON_CLK_SI544=y CONFIG_COMMON_CLK_SI570=y # CONFIG_COMMON_CLK_BM1880 is not set # CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_TPS68470 is not set # CONFIG_COMMON_CLK_CDCE925 is not set # CONFIG_COMMON_CLK_CS2000_CP is not set # CONFIG_COMMON_CLK_EN7523 is not set # CONFIG_COMMON_CLK_FSL_FLEXSPI is not set # CONFIG_COMMON_CLK_FSL_SAI is not set # CONFIG_COMMON_CLK_GEMINI is not set # CONFIG_COMMON_CLK_LAN966X is not set # CONFIG_COMMON_CLK_ASPEED is not set CONFIG_COMMON_CLK_S2MPS11=y CONFIG_CLK_TWL6040=y # CONFIG_COMMON_CLK_AXI_CLKGEN is not set # CONFIG_CLK_QORIQ is not set # CONFIG_CLK_LS1028A_PLLDIG is not set # CONFIG_COMMON_CLK_XGENE is not set CONFIG_COMMON_CLK_LOCHNAGAR=y CONFIG_COMMON_CLK_PALMAS=y CONFIG_COMMON_CLK_PWM=y # CONFIG_COMMON_CLK_OXNAS is not set # CONFIG_COMMON_CLK_RS9_PCIE is not set CONFIG_COMMON_CLK_VC5=y CONFIG_COMMON_CLK_VC7=y # CONFIG_COMMON_CLK_MMP2_AUDIO is not set # CONFIG_COMMON_CLK_BD718XX is not set CONFIG_COMMON_CLK_FIXED_MMIO=y # CONFIG_CLK_ACTIONS is not set # CONFIG_CLK_BAIKAL_T1 is not set # CONFIG_CLK_BCM2711_DVP is not set # CONFIG_CLK_BCM2835 is not set # CONFIG_CLK_BCM_63XX is not set # CONFIG_CLK_BCM_63XX_GATE is not set # CONFIG_CLK_BCM_KONA is not set # CONFIG_CLK_BCM_CYGNUS is not set # CONFIG_CLK_BCM_HR2 is not set # CONFIG_CLK_BCM_NSP is not set # CONFIG_CLK_BCM_NS2 is not set # CONFIG_CLK_BCM_SR is not set # CONFIG_CLK_RASPBERRYPI is not set # CONFIG_COMMON_CLK_HI3516CV300 is not set # CONFIG_COMMON_CLK_HI3519 is not set # CONFIG_COMMON_CLK_HI3559A is not set # CONFIG_COMMON_CLK_HI3660 is not set # CONFIG_COMMON_CLK_HI3670 is not set # CONFIG_COMMON_CLK_HI3798CV200 is not set # CONFIG_COMMON_CLK_HI6220 is not set # CONFIG_RESET_HISI is not set # CONFIG_COMMON_CLK_BOSTON is not set # CONFIG_MXC_CLK is not set # CONFIG_CLK_IMX8MM is not set # CONFIG_CLK_IMX8MN is not set # CONFIG_CLK_IMX8MP is not set # CONFIG_CLK_IMX8MQ is not set # CONFIG_CLK_IMX8ULP is not set # CONFIG_CLK_IMX93 is not set # # Ingenic SoCs drivers # # CONFIG_INGENIC_CGU_JZ4740 is not set # CONFIG_INGENIC_CGU_JZ4725B is not set # CONFIG_INGENIC_CGU_JZ4760 is not set # CONFIG_INGENIC_CGU_JZ4770 is not set # CONFIG_INGENIC_CGU_JZ4780 is not set # CONFIG_INGENIC_CGU_X1000 is not set # CONFIG_INGENIC_CGU_X1830 is not set # CONFIG_INGENIC_TCU_CLK is not set # end of Ingenic SoCs drivers # CONFIG_COMMON_CLK_KEYSTONE is not set # CONFIG_TI_SYSCON_CLK is not set # # Clock driver for MediaTek SoC # # CONFIG_COMMON_CLK_MT2701 is not set # CONFIG_COMMON_CLK_MT2712 is not set # CONFIG_COMMON_CLK_MT6765 is not set # CONFIG_COMMON_CLK_MT6779 is not set # CONFIG_COMMON_CLK_MT6795 is not set # CONFIG_COMMON_CLK_MT6797 is not set # CONFIG_COMMON_CLK_MT7622 is not set # CONFIG_COMMON_CLK_MT7629 is not set # CONFIG_COMMON_CLK_MT7986 is not set # CONFIG_COMMON_CLK_MT8135 is not set # CONFIG_COMMON_CLK_MT8167 is not set # CONFIG_COMMON_CLK_MT8173 is not set # CONFIG_COMMON_CLK_MT8183 is not set # CONFIG_COMMON_CLK_MT8186 is not set # CONFIG_COMMON_CLK_MT8192 is not set # CONFIG_COMMON_CLK_MT8195 is not set # CONFIG_COMMON_CLK_MT8365 is not set # CONFIG_COMMON_CLK_MT8516 is not set # end of Clock driver for MediaTek SoC # # Clock support for Amlogic platforms # # end of Clock support for Amlogic platforms # CONFIG_MSTAR_MSC313_MPLL is not set # CONFIG_MCHP_CLK_MPFS is not set # CONFIG_COMMON_CLK_PISTACHIO is not set # CONFIG_COMMON_CLK_QCOM is not set # CONFIG_CLK_MT7621 is not set # CONFIG_CLK_RENESAS is not set # CONFIG_COMMON_CLK_SAMSUNG is not set # CONFIG_S3C2410_COMMON_CLK is not set # CONFIG_S3C2412_COMMON_CLK is not set # CONFIG_S3C2443_COMMON_CLK is not set # CONFIG_CLK_SIFIVE is not set # CONFIG_CLK_INTEL_SOCFPGA is not set # CONFIG_SPRD_COMMON_CLK is not set # CONFIG_CLK_STARFIVE_JH7100 is not set CONFIG_CLK_SUNXI=y CONFIG_CLK_SUNXI_CLOCKS=y CONFIG_CLK_SUNXI_PRCM_SUN6I=y CONFIG_CLK_SUNXI_PRCM_SUN8I=y CONFIG_CLK_SUNXI_PRCM_SUN9I=y # CONFIG_SUNXI_CCU is not set # CONFIG_COMMON_CLK_TI_ADPLL is not set # CONFIG_CLK_UNIPHIER is not set # CONFIG_COMMON_CLK_VISCONTI is not set # CONFIG_CLK_LGM_CGU is not set CONFIG_XILINX_VCU=y CONFIG_COMMON_CLK_XLNX_CLKWZRD=y # CONFIG_COMMON_CLK_ZYNQMP is not set CONFIG_CLK_KUNIT_TEST=y CONFIG_CLK_GATE_KUNIT_TEST=y # CONFIG_HWSPINLOCK is not set # # Clock Source drivers # CONFIG_TIMER_OF=y CONFIG_TIMER_PROBE=y # CONFIG_BCM2835_TIMER is not set # CONFIG_BCM_KONA_TIMER is not set # CONFIG_DAVINCI_TIMER is not set # CONFIG_DIGICOLOR_TIMER is not set # CONFIG_OMAP_DM_TIMER is not set # CONFIG_DW_APB_TIMER is not set # CONFIG_FTTMR010_TIMER is not set # CONFIG_IXP4XX_TIMER is not set # CONFIG_MESON6_TIMER is not set # CONFIG_OWL_TIMER is not set # CONFIG_RDA_TIMER is not set # CONFIG_SUN4I_TIMER is not set # CONFIG_SUN5I_HSTIMER is not set # CONFIG_TEGRA_TIMER is not set # CONFIG_TEGRA186_TIMER is not set # CONFIG_VT8500_TIMER is not set # CONFIG_NPCM7XX_TIMER is not set # CONFIG_CADENCE_TTC_TIMER is not set # CONFIG_ASM9260_TIMER is not set # CONFIG_CLKSRC_DBX500_PRCMU is not set # CONFIG_CLPS711X_TIMER is not set # CONFIG_MXS_TIMER is not set # CONFIG_NSPIRE_TIMER is not set # CONFIG_INTEGRATOR_AP_TIMER is not set # CONFIG_CLKSRC_PISTACHIO is not set # CONFIG_CLKSRC_STM32_LP is not set # CONFIG_ARMV7M_SYSTICK is not set # CONFIG_ATMEL_PIT is not set # CONFIG_ATMEL_ST is not set # CONFIG_CLKSRC_SAMSUNG_PWM is not set # CONFIG_FSL_FTM_TIMER is not set # CONFIG_OXNAS_RPS_TIMER is not set # CONFIG_MTK_TIMER is not set # CONFIG_SPRD_TIMER is not set # CONFIG_CLKSRC_JCORE_PIT is not set # CONFIG_SH_TIMER_CMT is not set # CONFIG_SH_TIMER_MTU2 is not set # CONFIG_RENESAS_OSTM is not set # CONFIG_SH_TIMER_TMU is not set # CONFIG_EM_TIMER_STI is not set # CONFIG_CLKSRC_PXA is not set # CONFIG_TIMER_IMX_SYS_CTR is not set # CONFIG_CLKSRC_ST_LPC is not set # CONFIG_GXP_TIMER is not set # CONFIG_MSC313E_TIMER is not set # CONFIG_INGENIC_TIMER is not set # CONFIG_INGENIC_SYSOST is not set # CONFIG_INGENIC_OST is not set CONFIG_MICROCHIP_PIT64B=y # end of Clock Source drivers # CONFIG_MAILBOX is not set CONFIG_IOMMU_IOVA=y CONFIG_IOMMU_API=y # CONFIG_IOMMU_SUPPORT is not set # # Remoteproc drivers # CONFIG_REMOTEPROC=y # CONFIG_REMOTEPROC_CDEV is not set # CONFIG_INGENIC_VPU_RPROC is not set # CONFIG_MTK_SCP is not set # CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set # CONFIG_RCAR_REMOTEPROC is not set # end of Remoteproc drivers # # Rpmsg drivers # # CONFIG_RPMSG_VIRTIO is not set # end of Rpmsg drivers # CONFIG_SOUNDWIRE is not set # # SOC (System On Chip) specific Drivers # # # Amlogic SoC drivers # # CONFIG_MESON_CANVAS is not set # CONFIG_MESON_CLK_MEASURE is not set # CONFIG_MESON_GX_SOCINFO is not set # CONFIG_MESON_MX_SOCINFO is not set # end of Amlogic SoC drivers # # Apple SoC drivers # # CONFIG_APPLE_SART is not set # end of Apple SoC drivers # # ASPEED SoC drivers # # CONFIG_ASPEED_LPC_CTRL is not set # CONFIG_ASPEED_LPC_SNOOP is not set # CONFIG_ASPEED_UART_ROUTING is not set # CONFIG_ASPEED_P2A_CTRL is not set # CONFIG_ASPEED_SOCINFO is not set # end of ASPEED SoC drivers # CONFIG_AT91_SOC_ID is not set # CONFIG_AT91_SOC_SFR is not set # # Broadcom SoC drivers # # CONFIG_BCM2835_POWER is not set # CONFIG_SOC_BCM63XX is not set # CONFIG_SOC_BRCMSTB is not set # CONFIG_BCM_PMB is not set # end of Broadcom SoC drivers # # NXP/Freescale QorIQ SoC drivers # # CONFIG_QUICC_ENGINE is not set CONFIG_DPAA2_CONSOLE=y # end of NXP/Freescale QorIQ SoC drivers # # fujitsu SoC drivers # # end of fujitsu SoC drivers # # i.MX SoC drivers # # CONFIG_SOC_IMX8M is not set # CONFIG_SOC_IMX9 is not set # end of i.MX SoC drivers # # IXP4xx SoC drivers # # CONFIG_IXP4XX_QMGR is not set # CONFIG_IXP4XX_NPE is not set # end of IXP4xx SoC drivers # # Enable LiteX SoC Builder specific drivers # CONFIG_LITEX=y CONFIG_LITEX_SOC_CONTROLLER=y # end of Enable LiteX SoC Builder specific drivers # # MediaTek SoC drivers # # CONFIG_MTK_CMDQ is not set # CONFIG_MTK_DEVAPC is not set # CONFIG_MTK_INFRACFG is not set # CONFIG_MTK_PMIC_WRAP is not set # CONFIG_MTK_SCPSYS is not set # CONFIG_MTK_MMSYS is not set # end of MediaTek SoC drivers # # Qualcomm SoC drivers # # CONFIG_QCOM_COMMAND_DB is not set # CONFIG_QCOM_GENI_SE is not set # CONFIG_QCOM_GSBI is not set # CONFIG_QCOM_LLCC is not set # CONFIG_QCOM_RPMH is not set # CONFIG_QCOM_SPM is not set # CONFIG_QCOM_ICC_BWMON is not set # end of Qualcomm SoC drivers # CONFIG_SOC_RENESAS is not set # CONFIG_ROCKCHIP_GRF is not set # CONFIG_ROCKCHIP_IODOMAIN is not set # CONFIG_SOC_SAMSUNG is not set # CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set # CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set # CONFIG_SOC_TI is not set # CONFIG_UX500_SOC_ID is not set # # Xilinx SoC drivers # # end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set # CONFIG_DEVFREQ_GOV_POWERSAVE is not set # CONFIG_DEVFREQ_GOV_USERSPACE is not set # CONFIG_DEVFREQ_GOV_PASSIVE is not set # # DEVFREQ Drivers # # CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set # CONFIG_ARM_IMX_BUS_DEVFREQ is not set # CONFIG_ARM_TEGRA_DEVFREQ is not set # CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set # CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set # CONFIG_PM_DEVFREQ_EVENT is not set CONFIG_EXTCON=y # # Extcon Device Drivers # # CONFIG_EXTCON_ADC_JACK is not set # CONFIG_EXTCON_GPIO is not set # CONFIG_EXTCON_MAX14577 is not set CONFIG_EXTCON_MAX3355=y CONFIG_EXTCON_MAX8997=y # CONFIG_EXTCON_PALMAS is not set # CONFIG_EXTCON_PTN5150 is not set # CONFIG_EXTCON_QCOM_SPMI_MISC is not set # CONFIG_EXTCON_RT8973A is not set CONFIG_EXTCON_SM5502=y CONFIG_EXTCON_USB_GPIO=y # CONFIG_EXTCON_USBC_TUSB320 is not set CONFIG_MEMORY=y CONFIG_DDR=y # CONFIG_ATMEL_SDRAMC is not set # CONFIG_ATMEL_EBI is not set # CONFIG_BRCMSTB_DPFE is not set # CONFIG_BRCMSTB_MEMC is not set # CONFIG_BT1_L2_CTL is not set # CONFIG_TI_AEMIF is not set # CONFIG_TI_EMIF is not set # CONFIG_OMAP_GPMC is not set CONFIG_FPGA_DFL_EMIF=y # CONFIG_MVEBU_DEVBUS is not set # CONFIG_FSL_CORENET_CF is not set # CONFIG_FSL_IFC is not set # CONFIG_JZ4780_NEMC is not set # CONFIG_MTK_SMI is not set # CONFIG_DA8XX_DDRCTL is not set # CONFIG_RENESAS_RPCIF is not set # CONFIG_STM32_FMC2_EBI is not set # CONFIG_SAMSUNG_MC is not set CONFIG_TEGRA_MC=y CONFIG_TEGRA20_EMC=y CONFIG_TEGRA30_EMC=y CONFIG_TEGRA124_EMC=y # CONFIG_TEGRA210_EMC is not set CONFIG_IIO=y CONFIG_IIO_BUFFER=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_BUFFER_DMA=y CONFIG_IIO_BUFFER_DMAENGINE=y # CONFIG_IIO_BUFFER_HW_CONSUMER is not set CONFIG_IIO_KFIFO_BUF=y CONFIG_IIO_TRIGGERED_BUFFER=y CONFIG_IIO_CONFIGFS=y CONFIG_IIO_TRIGGER=y CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # CONFIG_IIO_SW_DEVICE is not set # CONFIG_IIO_SW_TRIGGER is not set CONFIG_IIO_TRIGGERED_EVENT=y # # Accelerometers # CONFIG_ADIS16201=y CONFIG_ADIS16209=y # CONFIG_ADXL313_I2C is not set # CONFIG_ADXL313_SPI is not set CONFIG_ADXL345=y CONFIG_ADXL345_I2C=y CONFIG_ADXL345_SPI=y # CONFIG_ADXL355_I2C is not set # CONFIG_ADXL355_SPI is not set CONFIG_ADXL367=y CONFIG_ADXL367_SPI=y CONFIG_ADXL367_I2C=y # CONFIG_ADXL372_SPI is not set # CONFIG_ADXL372_I2C is not set # CONFIG_BMA180 is not set CONFIG_BMA220=y # CONFIG_BMA400 is not set CONFIG_BMC150_ACCEL=y CONFIG_BMC150_ACCEL_I2C=y CONFIG_BMC150_ACCEL_SPI=y # CONFIG_BMI088_ACCEL is not set # CONFIG_DA280 is not set # CONFIG_DA311 is not set # CONFIG_DMARD06 is not set CONFIG_DMARD09=y # CONFIG_DMARD10 is not set # CONFIG_FXLS8962AF_I2C is not set # CONFIG_FXLS8962AF_SPI is not set CONFIG_IIO_ST_ACCEL_3AXIS=y CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y CONFIG_KXSD9=y CONFIG_KXSD9_SPI=y CONFIG_KXSD9_I2C=y # CONFIG_KXCJK1013 is not set # CONFIG_MC3230 is not set CONFIG_MMA7455=y # CONFIG_MMA7455_I2C is not set CONFIG_MMA7455_SPI=y CONFIG_MMA7660=y CONFIG_MMA8452=y # CONFIG_MMA9551 is not set # CONFIG_MMA9553 is not set CONFIG_MSA311=y CONFIG_MXC4005=y # CONFIG_MXC6255 is not set # CONFIG_SCA3000 is not set CONFIG_SCA3300=y CONFIG_STK8312=y # CONFIG_STK8BA50 is not set # end of Accelerometers # # Analog to digital converters # CONFIG_AD_SIGMA_DELTA=y CONFIG_AD7091R5=y CONFIG_AD7124=y CONFIG_AD7192=y CONFIG_AD7266=y CONFIG_AD7280=y CONFIG_AD7291=y CONFIG_AD7292=y CONFIG_AD7298=y # CONFIG_AD7476 is not set CONFIG_AD7606=y CONFIG_AD7606_IFACE_PARALLEL=y CONFIG_AD7606_IFACE_SPI=y # CONFIG_AD7766 is not set CONFIG_AD7768_1=y CONFIG_AD7780=y # CONFIG_AD7791 is not set CONFIG_AD7793=y CONFIG_AD7887=y CONFIG_AD7923=y # CONFIG_AD7949 is not set # CONFIG_AD799X is not set # CONFIG_ADI_AXI_ADC is not set # CONFIG_ASPEED_ADC is not set # CONFIG_AT91_SAMA5D2_ADC is not set # CONFIG_AXP20X_ADC is not set # CONFIG_AXP288_ADC is not set # CONFIG_BCM_IPROC_ADC is not set # CONFIG_BERLIN2_ADC is not set # CONFIG_CC10001_ADC is not set CONFIG_DA9150_GPADC=y # CONFIG_DLN2_ADC is not set CONFIG_ENVELOPE_DETECTOR=y # CONFIG_EXYNOS_ADC is not set CONFIG_HI8435=y # CONFIG_HX711 is not set CONFIG_INA2XX_ADC=y # CONFIG_INGENIC_ADC is not set # CONFIG_IMX7D_ADC is not set # CONFIG_IMX8QXP_ADC is not set # CONFIG_LPC18XX_ADC is not set # CONFIG_LPC32XX_ADC is not set # CONFIG_LTC2471 is not set CONFIG_LTC2485=y CONFIG_LTC2496=y CONFIG_LTC2497=y # CONFIG_MAX1027 is not set CONFIG_MAX11100=y # CONFIG_MAX1118 is not set CONFIG_MAX11205=y # CONFIG_MAX1241 is not set CONFIG_MAX1363=y # CONFIG_MAX9611 is not set CONFIG_MCP320X=y # CONFIG_MCP3422 is not set CONFIG_MCP3911=y CONFIG_MEDIATEK_MT6360_ADC=y # CONFIG_MEDIATEK_MT6577_AUXADC is not set CONFIG_MEN_Z188_ADC=y # CONFIG_MESON_SARADC is not set CONFIG_NAU7802=y # CONFIG_NPCM_ADC is not set # CONFIG_PALMAS_GPADC is not set CONFIG_QCOM_VADC_COMMON=y CONFIG_QCOM_SPMI_IADC=y CONFIG_QCOM_SPMI_VADC=y # CONFIG_QCOM_SPMI_ADC5 is not set # CONFIG_RCAR_GYRO_ADC is not set # CONFIG_ROCKCHIP_SARADC is not set # CONFIG_RICHTEK_RTQ6056 is not set # CONFIG_RZG2L_ADC is not set # CONFIG_SC27XX_ADC is not set # CONFIG_SPEAR_ADC is not set # CONFIG_SD_ADC_MODULATOR is not set # CONFIG_STM32_ADC_CORE is not set # CONFIG_STM32_DFSDM_CORE is not set # CONFIG_STM32_DFSDM_ADC is not set CONFIG_TI_ADC081C=y # CONFIG_TI_ADC0832 is not set # CONFIG_TI_ADC084S021 is not set CONFIG_TI_ADC12138=y CONFIG_TI_ADC108S102=y # CONFIG_TI_ADC128S052 is not set CONFIG_TI_ADC161S626=y CONFIG_TI_ADS1015=y CONFIG_TI_ADS7950=y CONFIG_TI_ADS8344=y CONFIG_TI_ADS8688=y CONFIG_TI_ADS124S08=y CONFIG_TI_ADS131E08=y # CONFIG_TI_TLC4541 is not set CONFIG_TI_TSC2046=y CONFIG_TWL4030_MADC=y CONFIG_TWL6030_GPADC=y CONFIG_VF610_ADC=y CONFIG_VIPERBOARD_ADC=y CONFIG_XILINX_XADC=y # CONFIG_XILINX_AMS is not set # end of Analog to digital converters # # Analog to digital and digital to analog converters # CONFIG_AD74413R=y # end of Analog to digital and digital to analog converters # # Analog Front Ends # CONFIG_IIO_RESCALE=y # end of Analog Front Ends # # Amplifiers # CONFIG_AD8366=y CONFIG_ADA4250=y # CONFIG_HMC425 is not set # end of Amplifiers # # Capacitance to digital converters # CONFIG_AD7150=y # CONFIG_AD7746 is not set # end of Capacitance to digital converters # # Chemical Sensors # CONFIG_ATLAS_PH_SENSOR=y # CONFIG_ATLAS_EZO_SENSOR is not set CONFIG_BME680=y CONFIG_BME680_I2C=y CONFIG_BME680_SPI=y CONFIG_CCS811=y CONFIG_IAQCORE=y CONFIG_PMS7003=y CONFIG_SCD30_CORE=y CONFIG_SCD30_I2C=y CONFIG_SCD30_SERIAL=y # CONFIG_SCD4X is not set CONFIG_SENSIRION_SGP30=y # CONFIG_SENSIRION_SGP40 is not set CONFIG_SPS30=y CONFIG_SPS30_I2C=y CONFIG_SPS30_SERIAL=y CONFIG_SENSEAIR_SUNRISE_CO2=y CONFIG_VZ89X=y # end of Chemical Sensors # # Hid Sensor IIO Common # # end of Hid Sensor IIO Common CONFIG_IIO_MS_SENSORS_I2C=y # # IIO SCMI Sensors # # end of IIO SCMI Sensors # # SSP Sensor Common # # CONFIG_IIO_SSP_SENSORHUB is not set # end of SSP Sensor Common CONFIG_IIO_ST_SENSORS_I2C=y CONFIG_IIO_ST_SENSORS_SPI=y CONFIG_IIO_ST_SENSORS_CORE=y # # Digital to analog converters # # CONFIG_AD3552R is not set CONFIG_AD5064=y CONFIG_AD5360=y # CONFIG_AD5380 is not set CONFIG_AD5421=y CONFIG_AD5446=y CONFIG_AD5449=y CONFIG_AD5592R_BASE=y CONFIG_AD5592R=y # CONFIG_AD5593R is not set # CONFIG_AD5504 is not set CONFIG_AD5624R_SPI=y CONFIG_LTC2688=y CONFIG_AD5686=y CONFIG_AD5686_SPI=y CONFIG_AD5696_I2C=y CONFIG_AD5755=y # CONFIG_AD5758 is not set CONFIG_AD5761=y # CONFIG_AD5764 is not set CONFIG_AD5766=y # CONFIG_AD5770R is not set CONFIG_AD5791=y CONFIG_AD7293=y # CONFIG_AD7303 is not set # CONFIG_AD8801 is not set # CONFIG_DPOT_DAC is not set CONFIG_DS4424=y # CONFIG_LPC18XX_DAC is not set # CONFIG_LTC1660 is not set CONFIG_LTC2632=y CONFIG_M62332=y CONFIG_MAX517=y CONFIG_MAX5821=y # CONFIG_MCP4725 is not set CONFIG_MCP4922=y # CONFIG_STM32_DAC is not set CONFIG_TI_DAC082S085=y CONFIG_TI_DAC5571=y # CONFIG_TI_DAC7311 is not set CONFIG_TI_DAC7612=y CONFIG_VF610_DAC=y # end of Digital to analog converters # # IIO dummy driver # # end of IIO dummy driver # # Filters # # end of Filters # # Frequency Synthesizers DDS/PLL # # # Clock Generator/Distribution # CONFIG_AD9523=y # end of Clock Generator/Distribution # # Phase-Locked Loop (PLL) frequency synthesizers # CONFIG_ADF4350=y CONFIG_ADF4371=y # CONFIG_ADMV1013 is not set CONFIG_ADMV4420=y CONFIG_ADRF6780=y # end of Phase-Locked Loop (PLL) frequency synthesizers # end of Frequency Synthesizers DDS/PLL # # Digital gyroscope sensors # CONFIG_ADIS16080=y CONFIG_ADIS16130=y CONFIG_ADIS16136=y CONFIG_ADIS16260=y CONFIG_ADXRS290=y # CONFIG_ADXRS450 is not set CONFIG_BMG160=y CONFIG_BMG160_I2C=y CONFIG_BMG160_SPI=y # CONFIG_FXAS21002C is not set # CONFIG_MPU3050_I2C is not set CONFIG_IIO_ST_GYRO_3AXIS=y # CONFIG_IIO_ST_GYRO_I2C_3AXIS is not set CONFIG_IIO_ST_GYRO_SPI_3AXIS=y CONFIG_ITG3200=y # end of Digital gyroscope sensors # # Health Sensors # # # Heart Rate Monitors # CONFIG_AFE4403=y # CONFIG_AFE4404 is not set CONFIG_MAX30100=y # CONFIG_MAX30102 is not set # end of Heart Rate Monitors # end of Health Sensors # # Humidity sensors # # CONFIG_AM2315 is not set # CONFIG_DHT11 is not set CONFIG_HDC100X=y CONFIG_HDC2010=y # CONFIG_HTS221 is not set CONFIG_HTU21=y CONFIG_SI7005=y # CONFIG_SI7020 is not set # end of Humidity sensors # # Inertial measurement units # CONFIG_ADIS16400=y CONFIG_ADIS16460=y CONFIG_ADIS16475=y # CONFIG_ADIS16480 is not set CONFIG_BMI160=y # CONFIG_BMI160_I2C is not set CONFIG_BMI160_SPI=y # CONFIG_BOSCH_BNO055_SERIAL is not set # CONFIG_BOSCH_BNO055_I2C is not set CONFIG_FXOS8700=y # CONFIG_FXOS8700_I2C is not set CONFIG_FXOS8700_SPI=y CONFIG_KMX61=y CONFIG_INV_ICM42600=y CONFIG_INV_ICM42600_I2C=y CONFIG_INV_ICM42600_SPI=y CONFIG_INV_MPU6050_IIO=y # CONFIG_INV_MPU6050_I2C is not set CONFIG_INV_MPU6050_SPI=y CONFIG_IIO_ST_LSM6DSX=y CONFIG_IIO_ST_LSM6DSX_I2C=y CONFIG_IIO_ST_LSM6DSX_SPI=y CONFIG_IIO_ST_LSM6DSX_I3C=y CONFIG_IIO_ST_LSM9DS0=y CONFIG_IIO_ST_LSM9DS0_I2C=y CONFIG_IIO_ST_LSM9DS0_SPI=y # end of Inertial measurement units CONFIG_IIO_ADIS_LIB=y CONFIG_IIO_ADIS_LIB_BUFFER=y # # Light sensors # CONFIG_ADJD_S311=y CONFIG_ADUX1020=y CONFIG_AL3010=y CONFIG_AL3320A=y # CONFIG_APDS9300 is not set # CONFIG_APDS9960 is not set CONFIG_AS73211=y # CONFIG_BH1750 is not set # CONFIG_BH1780 is not set # CONFIG_CM32181 is not set CONFIG_CM3232=y CONFIG_CM3323=y CONFIG_CM3605=y CONFIG_CM36651=y CONFIG_GP2AP002=y CONFIG_GP2AP020A00F=y # CONFIG_IQS621_ALS is not set CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y CONFIG_ISL29125=y CONFIG_JSA1212=y # CONFIG_RPR0521 is not set CONFIG_LTR501=y CONFIG_LTRF216A=y # CONFIG_LV0104CS is not set CONFIG_MAX44000=y CONFIG_MAX44009=y CONFIG_NOA1305=y CONFIG_OPT3001=y CONFIG_PA12203001=y # CONFIG_SI1133 is not set CONFIG_SI1145=y # CONFIG_STK3310 is not set CONFIG_ST_UVIS25=y CONFIG_ST_UVIS25_I2C=y CONFIG_ST_UVIS25_SPI=y CONFIG_TCS3414=y # CONFIG_TCS3472 is not set # CONFIG_SENSORS_TSL2563 is not set # CONFIG_TSL2583 is not set CONFIG_TSL2591=y CONFIG_TSL2772=y # CONFIG_TSL4531 is not set CONFIG_US5182D=y # CONFIG_VCNL4000 is not set # CONFIG_VCNL4035 is not set CONFIG_VEML6030=y CONFIG_VEML6070=y # CONFIG_VL6180 is not set # CONFIG_ZOPT2201 is not set # end of Light sensors # # Magnetometer sensors # CONFIG_AK8974=y CONFIG_AK8975=y CONFIG_AK09911=y CONFIG_BMC150_MAGN=y CONFIG_BMC150_MAGN_I2C=y # CONFIG_BMC150_MAGN_SPI is not set # CONFIG_MAG3110 is not set CONFIG_MMC35240=y CONFIG_IIO_ST_MAGN_3AXIS=y CONFIG_IIO_ST_MAGN_I2C_3AXIS=y CONFIG_IIO_ST_MAGN_SPI_3AXIS=y CONFIG_SENSORS_HMC5843=y CONFIG_SENSORS_HMC5843_I2C=y CONFIG_SENSORS_HMC5843_SPI=y CONFIG_SENSORS_RM3100=y CONFIG_SENSORS_RM3100_I2C=y CONFIG_SENSORS_RM3100_SPI=y # CONFIG_YAMAHA_YAS530 is not set # end of Magnetometer sensors # # Multiplexers # CONFIG_IIO_MUX=y # end of Multiplexers # # Inclinometer sensors # # end of Inclinometer sensors # CONFIG_IIO_RESCALE_KUNIT_TEST is not set # CONFIG_IIO_FORMAT_KUNIT_TEST is not set # # Triggers - standalone # CONFIG_IIO_INTERRUPT_TRIGGER=y # CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set # CONFIG_IIO_STM32_TIMER_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set # end of Triggers - standalone # # Linear and angular position sensors # # CONFIG_IQS624_POS is not set # end of Linear and angular position sensors # # Digital potentiometers # # CONFIG_AD5110 is not set CONFIG_AD5272=y CONFIG_DS1803=y CONFIG_MAX5432=y CONFIG_MAX5481=y CONFIG_MAX5487=y CONFIG_MCP4018=y CONFIG_MCP4131=y CONFIG_MCP4531=y CONFIG_MCP41010=y CONFIG_TPL0102=y # end of Digital potentiometers # # Digital potentiostats # CONFIG_LMP91000=y # end of Digital potentiostats # # Pressure sensors # CONFIG_ABP060MG=y CONFIG_BMP280=y CONFIG_BMP280_I2C=y CONFIG_BMP280_SPI=y CONFIG_DLHL60D=y CONFIG_DPS310=y # CONFIG_HP03 is not set CONFIG_ICP10100=y CONFIG_MPL115=y CONFIG_MPL115_I2C=y CONFIG_MPL115_SPI=y CONFIG_MPL3115=y # CONFIG_MS5611 is not set CONFIG_MS5637=y # CONFIG_IIO_ST_PRESS is not set CONFIG_T5403=y CONFIG_HP206C=y CONFIG_ZPA2326=y CONFIG_ZPA2326_I2C=y CONFIG_ZPA2326_SPI=y # end of Pressure sensors # # Lightning sensors # # CONFIG_AS3935 is not set # end of Lightning sensors # # Proximity and distance sensors # CONFIG_ISL29501=y # CONFIG_LIDAR_LITE_V2 is not set # CONFIG_MB1232 is not set CONFIG_PING=y CONFIG_RFD77402=y CONFIG_SRF04=y CONFIG_SX_COMMON=y CONFIG_SX9310=y # CONFIG_SX9324 is not set CONFIG_SX9360=y # CONFIG_SX9500 is not set # CONFIG_SRF08 is not set CONFIG_VCNL3020=y # CONFIG_VL53L0X_I2C is not set # end of Proximity and distance sensors # # Resolver to digital converters # # CONFIG_AD2S90 is not set CONFIG_AD2S1200=y # end of Resolver to digital converters # # Temperature sensors # # CONFIG_IQS620AT_TEMP is not set # CONFIG_LTC2983 is not set CONFIG_MAXIM_THERMOCOUPLE=y CONFIG_MLX90614=y CONFIG_MLX90632=y # CONFIG_TMP006 is not set # CONFIG_TMP007 is not set CONFIG_TMP117=y # CONFIG_TSYS01 is not set CONFIG_TSYS02D=y CONFIG_MAX31856=y CONFIG_MAX31865=y # end of Temperature sensors # CONFIG_NTB is not set CONFIG_PWM=y CONFIG_PWM_SYSFS=y CONFIG_PWM_DEBUG=y # CONFIG_PWM_ATMEL is not set CONFIG_PWM_ATMEL_HLCDC_PWM=y # CONFIG_PWM_ATMEL_TCB is not set # CONFIG_PWM_BCM_IPROC is not set # CONFIG_PWM_BCM_KONA is not set # CONFIG_PWM_BCM2835 is not set # CONFIG_PWM_BERLIN is not set # CONFIG_PWM_BRCMSTB is not set CONFIG_PWM_CLK=y # CONFIG_PWM_CLPS711X is not set CONFIG_PWM_DWC=y # CONFIG_PWM_EP93XX is not set CONFIG_PWM_FSL_FTM=y # CONFIG_PWM_HIBVT is not set # CONFIG_PWM_IMG is not set # CONFIG_PWM_IMX1 is not set # CONFIG_PWM_IMX27 is not set # CONFIG_PWM_IMX_TPM is not set # CONFIG_PWM_INTEL_LGM is not set # CONFIG_PWM_IQS620A is not set # CONFIG_PWM_JZ4740 is not set # CONFIG_PWM_KEEMBAY is not set # CONFIG_PWM_LPC18XX_SCT is not set # CONFIG_PWM_LPC32XX is not set # CONFIG_PWM_LPSS_PCI is not set # CONFIG_PWM_LPSS_PLATFORM is not set # CONFIG_PWM_MESON is not set # CONFIG_PWM_MTK_DISP is not set # CONFIG_PWM_MEDIATEK is not set # CONFIG_PWM_MXS is not set CONFIG_PWM_NTXEC=y # CONFIG_PWM_OMAP_DMTIMER is not set # CONFIG_PWM_PCA9685 is not set # CONFIG_PWM_PXA is not set # CONFIG_PWM_RASPBERRYPI_POE is not set # CONFIG_PWM_RCAR is not set # CONFIG_PWM_RENESAS_TPU is not set # CONFIG_PWM_ROCKCHIP is not set # CONFIG_PWM_SAMSUNG is not set # CONFIG_PWM_SIFIVE is not set # CONFIG_PWM_SL28CPLD is not set # CONFIG_PWM_SPEAR is not set # CONFIG_PWM_SPRD is not set # CONFIG_PWM_STI is not set # CONFIG_PWM_STM32 is not set # CONFIG_PWM_STM32_LP is not set # CONFIG_PWM_SUN4I is not set # CONFIG_PWM_SUNPLUS is not set # CONFIG_PWM_TEGRA is not set # CONFIG_PWM_TIECAP is not set # CONFIG_PWM_TIEHRPWM is not set CONFIG_PWM_TWL=y CONFIG_PWM_TWL_LED=y # CONFIG_PWM_VISCONTI is not set # CONFIG_PWM_VT8500 is not set # CONFIG_PWM_XILINX is not set # # IRQ chip support # CONFIG_IRQCHIP=y CONFIG_AL_FIC=y CONFIG_MADERA_IRQ=y CONFIG_OMPIC=y CONFIG_OR1K_PIC=y # CONFIG_JCORE_AIC is not set # CONFIG_RENESAS_INTC_IRQPIN is not set # CONFIG_RENESAS_IRQC is not set # CONFIG_RENESAS_RZA1_IRQC is not set # CONFIG_RENESAS_RZG2L_IRQC is not set # CONFIG_SL28CPLD_INTC is not set # CONFIG_TS4800_IRQ is not set CONFIG_XILINX_INTC=y # CONFIG_INGENIC_TCU_IRQ is not set # CONFIG_IRQ_UNIPHIER_AIDET is not set # CONFIG_MESON_IRQ_GPIO is not set # CONFIG_IMX_IRQSTEER is not set # CONFIG_IMX_INTMUX is not set # CONFIG_IMX_MU_MSI is not set # CONFIG_EXYNOS_IRQ_COMBINER is not set # CONFIG_MST_IRQ is not set # CONFIG_MCHP_EIC is not set # CONFIG_SUNPLUS_SP7021_INTC is not set # end of IRQ chip support CONFIG_IPACK_BUS=y CONFIG_BOARD_TPCI200=y CONFIG_RESET_CONTROLLER=y # CONFIG_RESET_A10SR is not set # CONFIG_RESET_ATH79 is not set # CONFIG_RESET_AXS10X is not set # CONFIG_RESET_BCM6345 is not set # CONFIG_RESET_BERLIN is not set # CONFIG_RESET_BRCMSTB is not set # CONFIG_RESET_BRCMSTB_RESCAL is not set # CONFIG_RESET_HSDK is not set # CONFIG_RESET_IMX7 is not set # CONFIG_RESET_INTEL_GW is not set # CONFIG_RESET_K210 is not set # CONFIG_RESET_LANTIQ is not set # CONFIG_RESET_LPC18XX is not set # CONFIG_RESET_MCHP_SPARX5 is not set # CONFIG_RESET_MESON is not set # CONFIG_RESET_MESON_AUDIO_ARB is not set # CONFIG_RESET_NPCM is not set # CONFIG_RESET_PISTACHIO is not set # CONFIG_RESET_QCOM_AOSS is not set # CONFIG_RESET_QCOM_PDC is not set CONFIG_RESET_RASPBERRYPI=y # CONFIG_RESET_RZG2L_USBPHY_CTRL is not set # CONFIG_RESET_SCMI is not set CONFIG_RESET_SIMPLE=y # CONFIG_RESET_SOCFPGA is not set # CONFIG_RESET_STARFIVE_JH7100 is not set # CONFIG_RESET_SUNPLUS is not set # CONFIG_RESET_SUNXI is not set # CONFIG_RESET_TI_SCI is not set CONFIG_RESET_TI_SYSCON=y CONFIG_RESET_TI_TPS380X=y # CONFIG_RESET_TN48M_CPLD is not set # CONFIG_RESET_UNIPHIER is not set # CONFIG_RESET_UNIPHIER_GLUE is not set # CONFIG_RESET_ZYNQ is not set # CONFIG_COMMON_RESET_HI3660 is not set # CONFIG_COMMON_RESET_HI6220 is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y CONFIG_GENERIC_PHY_MIPI_DPHY=y # CONFIG_PHY_LPC18XX_USB_OTG is not set # CONFIG_PHY_PISTACHIO_USB is not set # CONFIG_PHY_XGENE is not set # CONFIG_USB_LGM_PHY is not set CONFIG_PHY_CAN_TRANSCEIVER=y # CONFIG_PHY_SUN4I_USB is not set # CONFIG_PHY_SUN6I_MIPI_DPHY is not set # CONFIG_PHY_SUN9I_USB is not set # CONFIG_PHY_SUN50I_USB3 is not set # CONFIG_PHY_MESON8_HDMI_TX is not set # CONFIG_PHY_MESON8B_USB2 is not set # CONFIG_PHY_MESON_GXL_USB2 is not set # CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set # CONFIG_PHY_MESON_G12A_USB2 is not set # CONFIG_PHY_MESON_G12A_USB3_PCIE is not set # CONFIG_PHY_MESON_AXG_PCIE is not set # CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set # CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set # # PHY drivers for Broadcom platforms # # CONFIG_PHY_BCM63XX_USBH is not set # CONFIG_PHY_CYGNUS_PCIE is not set # CONFIG_PHY_BCM_SR_USB is not set CONFIG_BCM_KONA_USB2_PHY=y # CONFIG_PHY_BCM_NS_USB2 is not set # CONFIG_PHY_BCM_NS_USB3 is not set # CONFIG_PHY_NS2_PCIE is not set # CONFIG_PHY_NS2_USB_DRD is not set # CONFIG_PHY_BRCM_SATA is not set # CONFIG_PHY_BRCM_USB is not set # CONFIG_PHY_BCM_SR_PCIE is not set # end of PHY drivers for Broadcom platforms CONFIG_PHY_CADENCE_TORRENT=y CONFIG_PHY_CADENCE_DPHY=y # CONFIG_PHY_CADENCE_DPHY_RX is not set # CONFIG_PHY_CADENCE_SIERRA is not set # CONFIG_PHY_CADENCE_SALVO is not set # CONFIG_PHY_FSL_IMX8MQ_USB is not set # CONFIG_PHY_MIXEL_LVDS_PHY is not set # CONFIG_PHY_MIXEL_MIPI_DPHY is not set # CONFIG_PHY_FSL_IMX8M_PCIE is not set # CONFIG_PHY_FSL_LYNX_28G is not set # CONFIG_PHY_HI6220_USB is not set # CONFIG_PHY_HI3660_USB is not set # CONFIG_PHY_HI3670_USB is not set # CONFIG_PHY_HI3670_PCIE is not set # CONFIG_PHY_HISTB_COMBPHY is not set # CONFIG_PHY_HISI_INNO_USB2 is not set # CONFIG_PHY_INGENIC_USB is not set # CONFIG_PHY_LANTIQ_VRX200_PCIE is not set # CONFIG_PHY_LANTIQ_RCU_USB2 is not set # CONFIG_ARMADA375_USBCLUSTER_PHY is not set # CONFIG_PHY_BERLIN_SATA is not set # CONFIG_PHY_BERLIN_USB is not set CONFIG_PHY_MVEBU_A3700_UTMI=y # CONFIG_PHY_MVEBU_A38X_COMPHY is not set # CONFIG_PHY_MVEBU_CP110_UTMI is not set # CONFIG_PHY_PXA_28NM_HSIC is not set CONFIG_PHY_PXA_28NM_USB2=y # CONFIG_PHY_PXA_USB is not set # CONFIG_PHY_MMP3_USB is not set # CONFIG_PHY_MMP3_HSIC is not set # CONFIG_PHY_MTK_PCIE is not set # CONFIG_PHY_MTK_TPHY is not set # CONFIG_PHY_MTK_UFS is not set # CONFIG_PHY_MTK_XSPHY is not set # CONFIG_PHY_MTK_HDMI is not set # CONFIG_PHY_MTK_MIPI_DSI is not set # CONFIG_PHY_MTK_DP is not set # CONFIG_PHY_SPARX5_SERDES is not set # CONFIG_PHY_LAN966X_SERDES is not set CONFIG_PHY_CPCAP_USB=y CONFIG_PHY_MAPPHONE_MDM6600=y CONFIG_PHY_OCELOT_SERDES=y # CONFIG_PHY_ATH79_USB is not set # CONFIG_PHY_QCOM_EDP is not set # CONFIG_PHY_QCOM_IPQ4019_USB is not set # CONFIG_PHY_QCOM_PCIE2 is not set # CONFIG_PHY_QCOM_QMP is not set # CONFIG_PHY_QCOM_QUSB2 is not set CONFIG_PHY_QCOM_USB_HS=y # CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set # CONFIG_PHY_QCOM_USB_HSIC is not set # CONFIG_PHY_QCOM_USB_HS_28NM is not set # CONFIG_PHY_QCOM_USB_SS is not set # CONFIG_PHY_QCOM_IPQ806X_USB is not set # CONFIG_PHY_MT7621_PCI is not set # CONFIG_PHY_RALINK_USB is not set # CONFIG_PHY_RCAR_GEN3_USB3 is not set # CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set # CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set # CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set # CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set # CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set # CONFIG_PHY_ROCKCHIP_PCIE is not set # CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set # CONFIG_PHY_ROCKCHIP_TYPEC is not set # CONFIG_PHY_EXYNOS_DP_VIDEO is not set # CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set # CONFIG_PHY_EXYNOS_PCIE is not set # CONFIG_PHY_SAMSUNG_UFS is not set # CONFIG_PHY_SAMSUNG_USB2 is not set CONFIG_PHY_EXYNOS5_USBDRD=y # CONFIG_PHY_UNIPHIER_USB2 is not set # CONFIG_PHY_UNIPHIER_USB3 is not set # CONFIG_PHY_UNIPHIER_PCIE is not set # CONFIG_PHY_UNIPHIER_AHCI is not set # CONFIG_PHY_ST_SPEAR1310_MIPHY is not set # CONFIG_PHY_ST_SPEAR1340_MIPHY is not set # CONFIG_PHY_STIH407_USB is not set # CONFIG_PHY_STM32_USBPHYC is not set # CONFIG_PHY_SUNPLUS_USB is not set # CONFIG_PHY_TEGRA194_P2U is not set # CONFIG_PHY_DA8XX_USB is not set # CONFIG_PHY_DM816X_USB is not set # CONFIG_PHY_AM654_SERDES is not set # CONFIG_PHY_J721E_WIZ is not set # CONFIG_OMAP_CONTROL_PHY is not set # CONFIG_TI_PIPE3 is not set CONFIG_PHY_TUSB1210=y # CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set # CONFIG_PHY_INTEL_KEEMBAY_USB is not set # CONFIG_PHY_INTEL_LGM_COMBO is not set # CONFIG_PHY_INTEL_LGM_EMMC is not set # CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set # CONFIG_PHY_XILINX_ZYNQMP is not set # end of PHY Subsystem CONFIG_POWERCAP=y # CONFIG_DTPM is not set CONFIG_MCB=y CONFIG_MCB_PCI=y CONFIG_MCB_LPC=y # CONFIG_RAS is not set CONFIG_USB4=y # CONFIG_USB4_DEBUGFS_WRITE is not set CONFIG_USB4_KUNIT_TEST=y CONFIG_USB4_DMA_TEST=y # # Android # CONFIG_ANDROID_BINDER_IPC=y CONFIG_ANDROID_BINDERFS=y CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder" CONFIG_ANDROID_BINDER_IPC_SELFTEST=y # end of Android # CONFIG_DAX is not set CONFIG_NVMEM=y CONFIG_NVMEM_SYSFS=y # CONFIG_NVMEM_APPLE_EFUSES is not set # CONFIG_NVMEM_BCM_OCOTP is not set # CONFIG_NVMEM_BRCM_NVRAM is not set # CONFIG_NVMEM_IMX_IIM is not set # CONFIG_NVMEM_IMX_OCOTP is not set # CONFIG_NVMEM_JZ4780_EFUSE is not set # CONFIG_NVMEM_LAN9662_OTPC is not set # CONFIG_NVMEM_LAYERSCAPE_SFP is not set # CONFIG_NVMEM_LPC18XX_EEPROM is not set # CONFIG_NVMEM_LPC18XX_OTP is not set # CONFIG_NVMEM_MESON_MX_EFUSE is not set # CONFIG_NVMEM_MICROCHIP_OTPC is not set # CONFIG_NVMEM_MTK_EFUSE is not set # CONFIG_NVMEM_MXS_OCOTP is not set # CONFIG_NVMEM_NINTENDO_OTP is not set # CONFIG_NVMEM_QCOM_QFPROM is not set # CONFIG_NVMEM_RMEM is not set # CONFIG_NVMEM_ROCKCHIP_EFUSE is not set # CONFIG_NVMEM_ROCKCHIP_OTP is not set # CONFIG_NVMEM_SC27XX_EFUSE is not set # CONFIG_NVMEM_SNVS_LPGPR is not set CONFIG_NVMEM_SPMI_SDAM=y # CONFIG_NVMEM_SPRD_EFUSE is not set # CONFIG_NVMEM_STM32_ROMEM is not set # CONFIG_NVMEM_SUNPLUS_OCOTP is not set CONFIG_NVMEM_U_BOOT_ENV=y # CONFIG_NVMEM_UNIPHIER_EFUSE is not set # CONFIG_NVMEM_VF610_OCOTP is not set # # HW tracing support # CONFIG_STM=y # CONFIG_STM_PROTO_BASIC is not set # CONFIG_STM_PROTO_SYS_T is not set # CONFIG_STM_DUMMY is not set # CONFIG_STM_SOURCE_CONSOLE is not set CONFIG_STM_SOURCE_HEARTBEAT=y # CONFIG_STM_SOURCE_FTRACE is not set CONFIG_INTEL_TH=y CONFIG_INTEL_TH_PCI=y CONFIG_INTEL_TH_GTH=y CONFIG_INTEL_TH_STH=y CONFIG_INTEL_TH_MSU=y CONFIG_INTEL_TH_PTI=y # CONFIG_INTEL_TH_DEBUG is not set # end of HW tracing support CONFIG_FPGA=y # CONFIG_FPGA_MGR_SOCFPGA is not set # CONFIG_FPGA_MGR_SOCFPGA_A10 is not set # CONFIG_ALTERA_PR_IP_CORE is not set CONFIG_FPGA_MGR_ALTERA_PS_SPI=y # CONFIG_FPGA_MGR_ALTERA_CVP is not set # CONFIG_FPGA_MGR_ZYNQ_FPGA is not set CONFIG_FPGA_MGR_XILINX_SPI=y CONFIG_FPGA_MGR_ICE40_SPI=y CONFIG_FPGA_MGR_MACHXO2_SPI=y CONFIG_FPGA_BRIDGE=y CONFIG_ALTERA_FREEZE_BRIDGE=y # CONFIG_XILINX_PR_DECOUPLER is not set CONFIG_FPGA_REGION=y # CONFIG_OF_FPGA_REGION is not set CONFIG_FPGA_DFL=y # CONFIG_FPGA_DFL_AFU is not set CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=y CONFIG_FPGA_DFL_PCI=y # CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set # CONFIG_FPGA_MGR_VERSAL_FPGA is not set CONFIG_FPGA_M10_BMC_SEC_UPDATE=y # CONFIG_FPGA_MGR_MICROCHIP_SPI is not set CONFIG_FSI=y CONFIG_FSI_NEW_DEV_NODE=y # CONFIG_FSI_MASTER_GPIO is not set CONFIG_FSI_MASTER_HUB=y CONFIG_FSI_MASTER_ASPEED=y CONFIG_FSI_SCOM=y # CONFIG_FSI_SBEFIFO is not set # CONFIG_TEE is not set CONFIG_MULTIPLEXER=y # # Multiplexer drivers # CONFIG_MUX_ADG792A=y # CONFIG_MUX_ADGS1408 is not set CONFIG_MUX_GPIO=y # CONFIG_MUX_MMIO is not set # end of Multiplexer drivers CONFIG_PM_OPP=y CONFIG_SIOX=y # CONFIG_SIOX_BUS_GPIO is not set # CONFIG_SLIMBUS is not set CONFIG_INTERCONNECT=y # CONFIG_INTERCONNECT_IMX is not set # CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set # CONFIG_INTERCONNECT_SAMSUNG is not set # CONFIG_COUNTER is not set # CONFIG_MOST is not set # CONFIG_PECI is not set CONFIG_HTE=y # end of Device Drivers # # File systems # # CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set # CONFIG_EXT4_KUNIT_TESTS is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=y CONFIG_JFS_POSIX_ACL=y # CONFIG_JFS_SECURITY is not set CONFIG_JFS_DEBUG=y CONFIG_JFS_STATISTICS=y CONFIG_XFS_FS=y # CONFIG_XFS_SUPPORT_V4 is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set CONFIG_XFS_ONLINE_SCRUB=y # CONFIG_XFS_ONLINE_REPAIR is not set CONFIG_XFS_WARN=y # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=y # CONFIG_GFS2_FS_LOCKING_DLM is not set CONFIG_OCFS2_FS=y CONFIG_OCFS2_FS_O2CB=y CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y # CONFIG_OCFS2_FS_STATS is not set CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_NILFS2_FS=y # CONFIG_F2FS_FS is not set CONFIG_ZONEFS_FS=y CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_EXPORTFS_BLOCK_OPS=y # CONFIG_FILE_LOCKING is not set CONFIG_FS_ENCRYPTION=y CONFIG_FS_ENCRYPTION_ALGS=y CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y # CONFIG_FS_VERITY is not set CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set # CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y CONFIG_QFMT_V1=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=y CONFIG_AUTOFS_FS=y CONFIG_FUSE_FS=y CONFIG_CUSE=y CONFIG_VIRTIO_FS=y # CONFIG_OVERLAY_FS is not set # # Caches # CONFIG_NETFS_SUPPORT=y CONFIG_NETFS_STATS=y CONFIG_FSCACHE=y CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_DEBUG is not set CONFIG_CACHEFILES=y CONFIG_CACHEFILES_DEBUG=y CONFIG_CACHEFILES_ONDEMAND=y # end of Caches # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=y # end of CD-ROM/DVD Filesystems # # DOS/FAT/EXFAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_FAT_DEFAULT_UTF8=y # CONFIG_FAT_KUNIT_TEST is not set CONFIG_EXFAT_FS=y CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # CONFIG_NTFS3_FS is not set # end of DOS/FAT/EXFAT/NT Filesystems # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set # CONFIG_PROC_SYSCTL is not set CONFIG_PROC_PAGE_MONITOR=y # CONFIG_PROC_CHILDREN is not set CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_TMPFS_XATTR is not set CONFIG_MEMFD_CREATE=y CONFIG_CONFIGFS_FS=y # end of Pseudo filesystems # CONFIG_MISC_FILESYSTEMS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set CONFIG_NLS_CODEPAGE_852=y CONFIG_NLS_CODEPAGE_855=y CONFIG_NLS_CODEPAGE_857=y # CONFIG_NLS_CODEPAGE_860 is not set CONFIG_NLS_CODEPAGE_861=y CONFIG_NLS_CODEPAGE_862=y # CONFIG_NLS_CODEPAGE_863 is not set CONFIG_NLS_CODEPAGE_864=y # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set CONFIG_NLS_CODEPAGE_869=y CONFIG_NLS_CODEPAGE_936=y CONFIG_NLS_CODEPAGE_950=y # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set CONFIG_NLS_CODEPAGE_874=y # CONFIG_NLS_ISO8859_8 is not set CONFIG_NLS_CODEPAGE_1250=y # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_ISO8859_3=y # CONFIG_NLS_ISO8859_4 is not set CONFIG_NLS_ISO8859_5=y # CONFIG_NLS_ISO8859_6 is not set CONFIG_NLS_ISO8859_7=y # CONFIG_NLS_ISO8859_9 is not set CONFIG_NLS_ISO8859_13=y CONFIG_NLS_ISO8859_14=y # CONFIG_NLS_ISO8859_15 is not set CONFIG_NLS_KOI8_R=y CONFIG_NLS_KOI8_U=y CONFIG_NLS_MAC_ROMAN=y CONFIG_NLS_MAC_CELTIC=y CONFIG_NLS_MAC_CENTEURO=y CONFIG_NLS_MAC_CROATIAN=y CONFIG_NLS_MAC_CYRILLIC=y CONFIG_NLS_MAC_GAELIC=y # CONFIG_NLS_MAC_GREEK is not set CONFIG_NLS_MAC_ICELAND=y CONFIG_NLS_MAC_INUIT=y CONFIG_NLS_MAC_ROMANIAN=y CONFIG_NLS_MAC_TURKISH=y CONFIG_NLS_UTF8=y CONFIG_DLM=y CONFIG_DLM_DEPRECATED_API=y CONFIG_DLM_DEBUG=y CONFIG_UNICODE=y CONFIG_UNICODE_NORMALIZATION_SELFTEST=y CONFIG_IO_WQ=y # end of File systems # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_REQUEST_CACHE is not set # CONFIG_PERSISTENT_KEYRINGS is not set # CONFIG_TRUSTED_KEYS is not set CONFIG_ENCRYPTED_KEYS=y CONFIG_USER_DECRYPTED_DATA=y CONFIG_KEY_DH_OPERATIONS=y CONFIG_KEY_NOTIFICATIONS=y CONFIG_SECURITY_DMESG_RESTRICT=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y # CONFIG_HARDENED_USERCOPY is not set CONFIG_STATIC_USERMODEHELPER=y CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper" CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf" # # Kernel hardening options # # # Memory initialization # CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y # CONFIG_INIT_STACK_NONE is not set # CONFIG_INIT_STACK_ALL_PATTERN is not set CONFIG_INIT_STACK_ALL_ZERO=y # CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y CONFIG_ZERO_CALL_USED_REGS=y # end of Memory initialization CONFIG_RANDSTRUCT_NONE=y # end of Kernel hardening options # end of Security options CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_SKCIPHER=y CONFIG_CRYPTO_SKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y CONFIG_CRYPTO_KPP2=y CONFIG_CRYPTO_KPP=y CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=y CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y CONFIG_CRYPTO_PCRYPT=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=y # end of Crypto core or helper # # Public-key cryptography # CONFIG_CRYPTO_RSA=y CONFIG_CRYPTO_DH=y CONFIG_CRYPTO_DH_RFC7919_GROUPS=y CONFIG_CRYPTO_ECC=y CONFIG_CRYPTO_ECDH=y CONFIG_CRYPTO_ECDSA=y CONFIG_CRYPTO_ECRDSA=y CONFIG_CRYPTO_SM2=y CONFIG_CRYPTO_CURVE25519=y # end of Public-key cryptography # # Block ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set CONFIG_CRYPTO_ARIA=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST_COMMON=y # CONFIG_CRYPTO_CAST5 is not set CONFIG_CRYPTO_CAST6=y # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_SM4=y CONFIG_CRYPTO_SM4_GENERIC=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y # end of Block ciphers # # Length-preserving ciphers and modes # CONFIG_CRYPTO_ADIANTUM=y CONFIG_CRYPTO_CHACHA20=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CFB=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_HCTR2=y CONFIG_CRYPTO_KEYWRAP=y CONFIG_CRYPTO_LRW=y # CONFIG_CRYPTO_OFB is not set CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_XCTR=y # CONFIG_CRYPTO_XTS is not set CONFIG_CRYPTO_NHPOLY1305=y # end of Length-preserving ciphers and modes # # AEAD (authenticated encryption with associated data) ciphers # # CONFIG_CRYPTO_AEGIS128 is not set CONFIG_CRYPTO_CHACHA20POLY1305=y CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ESSIV=y # end of AEAD (authenticated encryption with associated data) ciphers # # Hashes, digests, and MACs # # CONFIG_CRYPTO_BLAKE2B is not set CONFIG_CRYPTO_CMAC=y CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_POLYVAL=y CONFIG_CRYPTO_POLY1305=y CONFIG_CRYPTO_RMD160=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_SHA3=y CONFIG_CRYPTO_SM3=y CONFIG_CRYPTO_SM3_GENERIC=y CONFIG_CRYPTO_STREEBOG=y CONFIG_CRYPTO_VMAC=y CONFIG_CRYPTO_WP512=y # CONFIG_CRYPTO_XCBC is not set CONFIG_CRYPTO_XXHASH=y # end of Hashes, digests, and MACs # # CRCs (cyclic redundancy checks) # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32=y CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_CRC64_ROCKSOFT=y # end of CRCs (cyclic redundancy checks) # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_842=y # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set CONFIG_CRYPTO_ZSTD=y # end of Compression # # Random number generation # CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_DRBG_MENU=y CONFIG_CRYPTO_DRBG_HMAC=y CONFIG_CRYPTO_DRBG_HASH=y # CONFIG_CRYPTO_DRBG_CTR is not set CONFIG_CRYPTO_DRBG=y CONFIG_CRYPTO_JITTERENTROPY=y CONFIG_CRYPTO_KDF800108_CTR=y # end of Random number generation # # Userspace interface # CONFIG_CRYPTO_USER_API=y CONFIG_CRYPTO_USER_API_HASH=y # CONFIG_CRYPTO_USER_API_SKCIPHER is not set # CONFIG_CRYPTO_USER_API_RNG is not set # CONFIG_CRYPTO_USER_API_AEAD is not set # CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set # CONFIG_CRYPTO_STATS is not set # end of Userspace interface CONFIG_CRYPTO_HASH_INFO=y # CONFIG_CRYPTO_HW is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y # CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set CONFIG_PKCS7_MESSAGE_PARSER=y CONFIG_PKCS7_TEST_KEY=y # CONFIG_SIGNED_PE_FILE_VERIFICATION is not set CONFIG_FIPS_SIGNATURE_SELFTEST=y # # Certificates for signature checking # CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set # CONFIG_SECONDARY_TRUSTED_KEYRING is not set # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set # end of Certificates for signature checking CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_LINEAR_RANGES=y # CONFIG_PACKING is not set CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_CORDIC=y CONFIG_PRIME_NUMBERS=y CONFIG_RATIONAL=y CONFIG_GENERIC_PCI_IOMAP=y # # Crypto library routines # CONFIG_CRYPTO_LIB_UTILS=y CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y # CONFIG_CRYPTO_LIB_CHACHA is not set CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y # CONFIG_CRYPTO_LIB_CURVE25519 is not set CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y # CONFIG_CRYPTO_LIB_POLY1305 is not set # CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set CONFIG_CRYPTO_LIB_SHA1=y CONFIG_CRYPTO_LIB_SHA256=y # end of Crypto library routines CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC64_ROCKSOFT=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC32_SELFTEST=y # CONFIG_CRC32_SLICEBY8 is not set # CONFIG_CRC32_SLICEBY4 is not set CONFIG_CRC32_SARWATE=y # CONFIG_CRC32_BIT is not set CONFIG_CRC64=y CONFIG_CRC4=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_CRC8=y CONFIG_XXHASH=y # CONFIG_RANDOM32_SELFTEST is not set CONFIG_842_COMPRESS=y CONFIG_842_DECOMPRESS=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZ4_COMPRESS=y CONFIG_ZSTD_COMMON=y CONFIG_ZSTD_COMPRESS=y CONFIG_ZSTD_DECOMPRESS=y CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set CONFIG_XZ_DEC_IA64=y # CONFIG_XZ_DEC_ARM is not set CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_MICROLZMA=y CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_GENERIC_ALLOCATOR=y CONFIG_REED_SOLOMON=y CONFIG_REED_SOLOMON_DEC8=y CONFIG_REED_SOLOMON_ENC16=y CONFIG_REED_SOLOMON_DEC16=y CONFIG_BCH=y CONFIG_INTERVAL_TREE=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y CONFIG_DMA_OPS=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_DMA_DECLARE_COHERENT=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y CONFIG_DMA_API_DEBUG=y CONFIG_DMA_API_DEBUG_SG=y # CONFIG_DMA_MAP_BENCHMARK is not set CONFIG_SGL_ALLOC=y # CONFIG_FORCE_NR_CPUS is not set CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y CONFIG_GENERIC_ATOMIC64=y CONFIG_LRU_CACHE=y CONFIG_CLZ_TAB=y # CONFIG_IRQ_POLL is not set CONFIG_MPILIB=y CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y CONFIG_FONT_SUPPORT=y CONFIG_FONT_8x16=y CONFIG_FONT_AUTOSELECT=y CONFIG_SG_POOL=y CONFIG_STACKDEPOT=y CONFIG_STACKDEPOT_ALWAYS_INIT=y CONFIG_REF_TRACKER=y CONFIG_SBITMAP=y # CONFIG_PARMAN is not set # CONFIG_OBJAGG is not set # end of Library routines # # Kernel hacking # # # printk and dmesg options # # CONFIG_PRINTK_TIME is not set CONFIG_PRINTK_CALLER=y # CONFIG_STACKTRACE_BUILD_ID is not set CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 CONFIG_DYNAMIC_DEBUG=y CONFIG_DYNAMIC_DEBUG_CORE=y # CONFIG_SYMBOLIC_ERRNAME is not set # end of printk and dmesg options CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MISC=y # # Compile-time checks and compiler options # CONFIG_DEBUG_INFO=y CONFIG_AS_HAS_NON_CONST_LEB128=y # CONFIG_DEBUG_INFO_NONE is not set CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_DEBUG_INFO_DWARF4 is not set # CONFIG_DEBUG_INFO_DWARF5 is not set CONFIG_DEBUG_INFO_REDUCED=y # CONFIG_DEBUG_INFO_COMPRESSED is not set # CONFIG_DEBUG_INFO_SPLIT is not set CONFIG_PAHOLE_HAS_SPLIT_BTF=y CONFIG_GDB_SCRIPTS=y CONFIG_FRAME_WARN=1024 CONFIG_STRIP_ASM_SYMS=y CONFIG_READABLE_ASM=y # CONFIG_HEADERS_INSTALL is not set CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_SECTION_MISMATCH_WARN_ONLY=y CONFIG_ARCH_WANT_FRAME_POINTERS=y # CONFIG_FRAME_POINTER is not set # CONFIG_VMLINUX_MAP is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # end of Compile-time checks and compiler options # # Generic Kernel Debugging Instruments # # CONFIG_MAGIC_SYSRQ is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_FS_ALLOW_ALL is not set CONFIG_DEBUG_FS_DISALLOW_MOUNT=y # CONFIG_DEBUG_FS_ALLOW_NONE is not set CONFIG_UBSAN=y CONFIG_CC_HAS_UBSAN_BOUNDS=y CONFIG_UBSAN_BOUNDS=y CONFIG_UBSAN_ONLY_BOUNDS=y CONFIG_UBSAN_SHIFT=y CONFIG_UBSAN_DIV_ZERO=y # CONFIG_UBSAN_UNREACHABLE is not set CONFIG_UBSAN_BOOL=y CONFIG_UBSAN_ENUM=y CONFIG_HAVE_KCSAN_COMPILER=y # end of Generic Kernel Debugging Instruments # # Networking Debugging # CONFIG_NET_DEV_REFCNT_TRACKER=y CONFIG_NET_NS_REFCNT_TRACKER=y CONFIG_DEBUG_NET=y # end of Networking Debugging # # Memory Debugging # CONFIG_PAGE_EXTENSION=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_SLUB_DEBUG=y CONFIG_SLUB_DEBUG_ON=y CONFIG_PAGE_OWNER=y CONFIG_PAGE_POISONING=y # CONFIG_DEBUG_PAGE_REF is not set CONFIG_DEBUG_OBJECTS=y # CONFIG_DEBUG_OBJECTS_SELFTEST is not set CONFIG_DEBUG_OBJECTS_FREE=y CONFIG_DEBUG_OBJECTS_TIMERS=y # CONFIG_DEBUG_OBJECTS_WORK is not set # CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 CONFIG_SHRINKER_DEBUG=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_SCHED_STACK_END_CHECK=y CONFIG_DEBUG_VM_IRQSOFF=y CONFIG_DEBUG_VM=y CONFIG_DEBUG_VM_MAPLE_TREE=y CONFIG_DEBUG_VM_RB=y CONFIG_DEBUG_VM_PGFLAGS=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACKOVERFLOW is not set CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y # end of Memory Debugging # CONFIG_DEBUG_SHIRQ is not set # # Debug Oops, Lockups and Hangs # # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_PANIC_TIMEOUT=0 CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y # CONFIG_DETECT_HUNG_TASK is not set CONFIG_WQ_WATCHDOG=y # end of Debug Oops, Lockups and Hangs # # Scheduler Debugging # # CONFIG_SCHED_DEBUG is not set CONFIG_SCHED_INFO=y CONFIG_SCHEDSTATS=y # end of Scheduler Debugging CONFIG_DEBUG_TIMEKEEPING=y # # Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RAW_LOCK_NESTING=y CONFIG_LOCK_STAT=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y CONFIG_DEBUG_RWSEMS=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_LOCKDEP=y CONFIG_LOCKDEP_BITS=15 CONFIG_LOCKDEP_CHAINS_BITS=16 CONFIG_LOCKDEP_STACK_TRACE_BITS=19 CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14 CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12 # CONFIG_DEBUG_LOCKDEP is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set CONFIG_DEBUG_LOCKING_API_SELFTESTS=y # CONFIG_LOCK_TORTURE_TEST is not set CONFIG_WW_MUTEX_SELFTEST=y CONFIG_SCF_TORTURE_TEST=y # end of Lock Debugging (spinlocks, mutexes, etc...) CONFIG_TRACE_IRQFLAGS=y CONFIG_DEBUG_IRQFLAGS=y CONFIG_STACKTRACE=y CONFIG_WARN_ALL_UNSEEDED_RANDOM=y CONFIG_DEBUG_KOBJECT=y CONFIG_DEBUG_KOBJECT_RELEASE=y # # Debug kernel data structures # CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_PLIST is not set CONFIG_DEBUG_SG=y # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BUG_ON_DATA_CORRUPTION is not set CONFIG_DEBUG_MAPLE_TREE=y # end of Debug kernel data structures CONFIG_DEBUG_CREDENTIALS=y # # RCU Debugging # CONFIG_PROVE_RCU=y CONFIG_PROVE_RCU_LIST=y CONFIG_TORTURE_TEST=y CONFIG_RCU_SCALE_TEST=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_REF_SCALE_TEST=y CONFIG_RCU_CPU_STALL_TIMEOUT=21 CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0 CONFIG_RCU_TRACE=y # CONFIG_RCU_EQS_DEBUG is not set # CONFIG_RCU_STRICT_GRACE_PERIOD is not set # end of RCU Debugging CONFIG_DEBUG_WQ_FORCE_RR_CPU=y CONFIG_NOP_TRACER=y CONFIG_TRACER_MAX_TRACE=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_PREEMPTIRQ_TRACEPOINTS=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_BOOTTIME_TRACING=y CONFIG_IRQSOFF_TRACER=y # CONFIG_SCHED_TRACER is not set CONFIG_HWLAT_TRACER=y # CONFIG_OSNOISE_TRACER is not set # CONFIG_TIMERLAT_TRACER is not set CONFIG_TRACER_SNAPSHOT=y CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y CONFIG_TRACE_BRANCH_PROFILING=y # CONFIG_BRANCH_PROFILE_NONE is not set # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set CONFIG_PROFILE_ALL_BRANCHES=y CONFIG_TRACING_BRANCHES=y CONFIG_BRANCH_TRACER=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SYNTH_EVENTS is not set # CONFIG_USER_EVENTS is not set # CONFIG_TRACE_EVENT_INJECT is not set # CONFIG_TRACEPOINT_BENCHMARK is not set CONFIG_RING_BUFFER_BENCHMARK=y # CONFIG_TRACE_EVAL_MAP_FILE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_RING_BUFFER_STARTUP_TEST is not set # CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set # CONFIG_RV is not set # CONFIG_SAMPLES is not set # # openrisc Debugging # # end of openrisc Debugging # # Kernel Testing and Coverage # CONFIG_KUNIT=y CONFIG_KUNIT_DEBUGFS=y # CONFIG_KUNIT_TEST is not set CONFIG_KUNIT_EXAMPLE_TEST=y # CONFIG_KUNIT_ALL_TESTS is not set # CONFIG_KUNIT_DEFAULT_ENABLED is not set CONFIG_NOTIFIER_ERROR_INJECTION=y CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y # CONFIG_FAULT_INJECTION is not set CONFIG_CC_HAS_SANCOV_TRACE_PC=y CONFIG_RUNTIME_TESTING_MENU=y CONFIG_LKDTM=y CONFIG_CPUMASK_KUNIT_TEST=y CONFIG_TEST_LIST_SORT=y CONFIG_TEST_MIN_HEAP=y CONFIG_TEST_SORT=y CONFIG_TEST_DIV64=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_TEST_REF_TRACKER is not set CONFIG_RBTREE_TEST=y CONFIG_REED_SOLOMON_TEST=y CONFIG_INTERVAL_TREE_TEST=y # CONFIG_ATOMIC64_SELFTEST is not set CONFIG_TEST_HEXDUMP=y CONFIG_STRING_SELFTEST=y # CONFIG_TEST_STRING_HELPERS is not set CONFIG_TEST_STRSCPY=y # CONFIG_TEST_KSTRTOX is not set CONFIG_TEST_PRINTF=y CONFIG_TEST_SCANF=y # CONFIG_TEST_BITMAP is not set # CONFIG_TEST_UUID is not set # CONFIG_TEST_XARRAY is not set CONFIG_TEST_MAPLE_TREE=y # CONFIG_TEST_RHASHTABLE is not set CONFIG_TEST_SIPHASH=y # CONFIG_TEST_IDA is not set CONFIG_FIND_BIT_BENCHMARK=y CONFIG_TEST_FIRMWARE=y CONFIG_BITFIELD_KUNIT=y CONFIG_HASH_KUNIT_TEST=y CONFIG_RESOURCE_KUNIT_TEST=y CONFIG_SYSCTL_KUNIT_TEST=y CONFIG_LIST_KUNIT_TEST=y # CONFIG_LINEAR_RANGES_TEST is not set CONFIG_CMDLINE_KUNIT_TEST=y # CONFIG_BITS_TEST is not set # CONFIG_SLUB_KUNIT_TEST is not set # CONFIG_RATIONAL_KUNIT_TEST is not set CONFIG_MEMCPY_KUNIT_TEST=y # CONFIG_IS_SIGNED_TYPE_KUNIT_TEST is not set CONFIG_OVERFLOW_KUNIT_TEST=y CONFIG_STACKINIT_KUNIT_TEST=y # CONFIG_TEST_UDELAY is not set # CONFIG_TEST_DYNAMIC_DEBUG is not set # CONFIG_TEST_MEMCAT_P is not set CONFIG_TEST_MEMINIT=y # CONFIG_TEST_FREE_PAGES is not set # end of Kernel Testing and Coverage # # Rust hacking # # end of Rust hacking # CONFIG_WARN_MISSING_DOCUMENTS is not set # CONFIG_WARN_ABI_ERRORS is not set # end of Kernel hacking [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061034epcas5p3fe90293ad08df4901f98bae2d7cfc1ba@epcas5p3.samsung.com>]
* [PATCH v5 07/10] dm: Add support for copy offload. [not found] ` <CGME20221123061034epcas5p3fe90293ad08df4901f98bae2d7cfc1ba@epcas5p3.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty Before enabling copy for dm target, check if underlying devices and dm target support copy. Avoid split happening inside dm target. Fail early if the request needs split, currently splitting copy request is not supported. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> --- drivers/md/dm-table.c | 42 +++++++++++++++++++++++++++++++++++ drivers/md/dm.c | 7 ++++++ include/linux/device-mapper.h | 5 +++++ 3 files changed, 54 insertions(+) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 078da18bb86d..b2073e857a74 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1875,6 +1875,39 @@ static bool dm_table_supports_nowait(struct dm_table *t) return true; } +static int device_not_copy_capable(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) +{ + struct request_queue *q = bdev_get_queue(dev->bdev); + + return !blk_queue_copy(q); +} + +static bool dm_table_supports_copy(struct dm_table *t) +{ + struct dm_target *ti; + unsigned int i; + + for (i = 0; i < t->num_targets; i++) { + ti = dm_table_get_target(t, i); + + if (!ti->copy_offload_supported) + return false; + + /* + * target provides copy support (as implied by setting + * 'copy_offload_supported') + * and it relies on _all_ data devices having copy support. + */ + if (!ti->type->iterate_devices || + ti->type->iterate_devices(ti, + device_not_copy_capable, NULL)) + return false; + } + + return true; +} + static int device_not_discard_capable(struct dm_target *ti, struct dm_dev *dev, sector_t start, sector_t len, void *data) { @@ -1957,6 +1990,15 @@ int dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, q->limits.discard_misaligned = 0; } + if (!dm_table_supports_copy(t)) { + blk_queue_flag_clear(QUEUE_FLAG_COPY, q); + /* Must also clear copy limits... */ + q->limits.max_copy_sectors = 0; + q->limits.max_copy_sectors_hw = 0; + } else { + blk_queue_flag_set(QUEUE_FLAG_COPY, q); + } + if (!dm_table_supports_secure_erase(t)) q->limits.max_secure_erase_sectors = 0; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e1ea3a7bd9d9..713335995290 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1690,6 +1690,13 @@ static blk_status_t __split_and_process_bio(struct clone_info *ci) if (unlikely(ci->is_abnormal_io)) return __process_abnormal_io(ci, ti); + if ((unlikely(op_is_copy(ci->bio->bi_opf)) && + max_io_len(ti, ci->sector) < ci->sector_count)) { + DMERR("Error, IO size(%u) > max target size(%llu)\n", + ci->sector_count, max_io_len(ti, ci->sector)); + return BLK_STS_IOERR; + } + /* * Only support bio polling for normal IO, and the target io is * exactly inside the dm_io instance (verified in dm_poll_dm_io) diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 04c6acf7faaa..da4e77e81011 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -379,6 +379,11 @@ struct dm_target { * bio_set_dev(). NOTE: ideally a target should _not_ need this. */ bool needs_bio_set_dev:1; + + /* + * copy offload is supported + */ + bool copy_offload_supported:1; }; void *dm_per_bio_data(struct bio *bio, size_t data_size); -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 07/10] dm: Add support for copy offload. @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, nitheshshetty Before enabling copy for dm target, check if underlying devices and dm target support copy. Avoid split happening inside dm target. Fail early if the request needs split, currently splitting copy request is not supported. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> --- drivers/md/dm-table.c | 42 +++++++++++++++++++++++++++++++++++ drivers/md/dm.c | 7 ++++++ include/linux/device-mapper.h | 5 +++++ 3 files changed, 54 insertions(+) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 078da18bb86d..b2073e857a74 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1875,6 +1875,39 @@ static bool dm_table_supports_nowait(struct dm_table *t) return true; } +static int device_not_copy_capable(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) +{ + struct request_queue *q = bdev_get_queue(dev->bdev); + + return !blk_queue_copy(q); +} + +static bool dm_table_supports_copy(struct dm_table *t) +{ + struct dm_target *ti; + unsigned int i; + + for (i = 0; i < t->num_targets; i++) { + ti = dm_table_get_target(t, i); + + if (!ti->copy_offload_supported) + return false; + + /* + * target provides copy support (as implied by setting + * 'copy_offload_supported') + * and it relies on _all_ data devices having copy support. + */ + if (!ti->type->iterate_devices || + ti->type->iterate_devices(ti, + device_not_copy_capable, NULL)) + return false; + } + + return true; +} + static int device_not_discard_capable(struct dm_target *ti, struct dm_dev *dev, sector_t start, sector_t len, void *data) { @@ -1957,6 +1990,15 @@ int dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, q->limits.discard_misaligned = 0; } + if (!dm_table_supports_copy(t)) { + blk_queue_flag_clear(QUEUE_FLAG_COPY, q); + /* Must also clear copy limits... */ + q->limits.max_copy_sectors = 0; + q->limits.max_copy_sectors_hw = 0; + } else { + blk_queue_flag_set(QUEUE_FLAG_COPY, q); + } + if (!dm_table_supports_secure_erase(t)) q->limits.max_secure_erase_sectors = 0; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e1ea3a7bd9d9..713335995290 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1690,6 +1690,13 @@ static blk_status_t __split_and_process_bio(struct clone_info *ci) if (unlikely(ci->is_abnormal_io)) return __process_abnormal_io(ci, ti); + if ((unlikely(op_is_copy(ci->bio->bi_opf)) && + max_io_len(ti, ci->sector) < ci->sector_count)) { + DMERR("Error, IO size(%u) > max target size(%llu)\n", + ci->sector_count, max_io_len(ti, ci->sector)); + return BLK_STS_IOERR; + } + /* * Only support bio polling for normal IO, and the target io is * exactly inside the dm_io instance (verified in dm_poll_dm_io) diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 04c6acf7faaa..da4e77e81011 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -379,6 +379,11 @@ struct dm_target { * bio_set_dev(). NOTE: ideally a target should _not_ need this. */ bool needs_bio_set_dev:1; + + /* + * copy offload is supported + */ + bool copy_offload_supported:1; }; void *dm_per_bio_data(struct bio *bio, size_t data_size); -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061037epcas5p4d57436204fbe0065819b156eeeddbfac@epcas5p4.samsung.com>]
* [PATCH v5 08/10] dm: Enable copy offload for dm-linear target [not found] ` <CGME20221123061037epcas5p4d57436204fbe0065819b156eeeddbfac@epcas5p4.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty Setting copy_offload_supported flag to enable offload. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> --- drivers/md/dm-linear.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c index 3212ef6aa81b..b4b57bead495 100644 --- a/drivers/md/dm-linear.c +++ b/drivers/md/dm-linear.c @@ -61,6 +61,7 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->num_discard_bios = 1; ti->num_secure_erase_bios = 1; ti->num_write_zeroes_bios = 1; + ti->copy_offload_supported = 1; ti->private = lc; return 0; -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 08/10] dm: Enable copy offload for dm-linear target @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, nitheshshetty Setting copy_offload_supported flag to enable offload. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> --- drivers/md/dm-linear.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c index 3212ef6aa81b..b4b57bead495 100644 --- a/drivers/md/dm-linear.c +++ b/drivers/md/dm-linear.c @@ -61,6 +61,7 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->num_discard_bios = 1; ti->num_secure_erase_bios = 1; ti->num_write_zeroes_bios = 1; + ti->copy_offload_supported = 1; ti->private = lc; return 0; -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061041epcas5p4413569a46ee730cd3033a9025c8f134a@epcas5p4.samsung.com>]
* [PATCH v5 09/10] dm kcopyd: use copy offload support [not found] ` <CGME20221123061041epcas5p4413569a46ee730cd3033a9025c8f134a@epcas5p4.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty Introduce copy_jobs to use copy-offload, if supported by underlying devices otherwise fall back to existing method. run_copy_jobs() calls block layer copy offload API, if both source and destination request queue are same and support copy offload. On successful completion, destination regions copied count is made zero, failed regions are processed via existing method. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- drivers/md/dm-kcopyd.c | 56 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 50 insertions(+), 6 deletions(-) diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 4d3bbbea2e9a..2f9985f671ac 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -74,18 +74,20 @@ struct dm_kcopyd_client { atomic_t nr_jobs; /* - * We maintain four lists of jobs: + * We maintain five lists of jobs: * - * i) jobs waiting for pages - * ii) jobs that have pages, and are waiting for the io to be issued. - * iii) jobs that don't need to do any IO and just run a callback - * iv) jobs that have completed. + * i) jobs waiting to try copy offload + * ii) jobs waiting for pages + * iii) jobs that have pages, and are waiting for the io to be issued. + * iv) jobs that don't need to do any IO and just run a callback + * v) jobs that have completed. * - * All four of these are protected by job_lock. + * All five of these are protected by job_lock. */ spinlock_t job_lock; struct list_head callback_jobs; struct list_head complete_jobs; + struct list_head copy_jobs; struct list_head io_jobs; struct list_head pages_jobs; }; @@ -579,6 +581,43 @@ static int run_io_job(struct kcopyd_job *job) return r; } +static int run_copy_job(struct kcopyd_job *job) +{ + int r, i, count = 0; + struct range_entry range; + + struct request_queue *src_q, *dest_q; + + for (i = 0; i < job->num_dests; i++) { + range.dst = job->dests[i].sector << SECTOR_SHIFT; + range.src = job->source.sector << SECTOR_SHIFT; + range.len = job->source.count << SECTOR_SHIFT; + + src_q = bdev_get_queue(job->source.bdev); + dest_q = bdev_get_queue(job->dests[i].bdev); + + if (src_q != dest_q || !blk_queue_copy(src_q)) + break; + + r = blkdev_issue_copy(job->source.bdev, job->dests[i].bdev, + &range, 1, NULL, NULL, GFP_KERNEL); + if (r) + break; + + job->dests[i].count = 0; + count++; + } + + if (count == job->num_dests) { + push(&job->kc->complete_jobs, job); + } else { + push(&job->kc->pages_jobs, job); + r = 0; + } + + return r; +} + static int run_pages_job(struct kcopyd_job *job) { int r; @@ -659,6 +698,7 @@ static void do_work(struct work_struct *work) spin_unlock_irq(&kc->job_lock); blk_start_plug(&plug); + process_jobs(&kc->copy_jobs, kc, run_copy_job); process_jobs(&kc->complete_jobs, kc, run_complete_job); process_jobs(&kc->pages_jobs, kc, run_pages_job); process_jobs(&kc->io_jobs, kc, run_io_job); @@ -676,6 +716,8 @@ static void dispatch_job(struct kcopyd_job *job) atomic_inc(&kc->nr_jobs); if (unlikely(!job->source.count)) push(&kc->callback_jobs, job); + else if (job->source.bdev->bd_disk == job->dests[0].bdev->bd_disk) + push(&kc->copy_jobs, job); else if (job->pages == &zero_page_list) push(&kc->io_jobs, job); else @@ -916,6 +958,7 @@ struct dm_kcopyd_client *dm_kcopyd_client_create(struct dm_kcopyd_throttle *thro spin_lock_init(&kc->job_lock); INIT_LIST_HEAD(&kc->callback_jobs); INIT_LIST_HEAD(&kc->complete_jobs); + INIT_LIST_HEAD(&kc->copy_jobs); INIT_LIST_HEAD(&kc->io_jobs); INIT_LIST_HEAD(&kc->pages_jobs); kc->throttle = throttle; @@ -971,6 +1014,7 @@ void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc) BUG_ON(!list_empty(&kc->callback_jobs)); BUG_ON(!list_empty(&kc->complete_jobs)); + WARN_ON(!list_empty(&kc->copy_jobs)); BUG_ON(!list_empty(&kc->io_jobs)); BUG_ON(!list_empty(&kc->pages_jobs)); destroy_workqueue(kc->kcopyd_wq); -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 09/10] dm kcopyd: use copy offload support @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, nitheshshetty Introduce copy_jobs to use copy-offload, if supported by underlying devices otherwise fall back to existing method. run_copy_jobs() calls block layer copy offload API, if both source and destination request queue are same and support copy offload. On successful completion, destination regions copied count is made zero, failed regions are processed via existing method. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- drivers/md/dm-kcopyd.c | 56 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 50 insertions(+), 6 deletions(-) diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 4d3bbbea2e9a..2f9985f671ac 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -74,18 +74,20 @@ struct dm_kcopyd_client { atomic_t nr_jobs; /* - * We maintain four lists of jobs: + * We maintain five lists of jobs: * - * i) jobs waiting for pages - * ii) jobs that have pages, and are waiting for the io to be issued. - * iii) jobs that don't need to do any IO and just run a callback - * iv) jobs that have completed. + * i) jobs waiting to try copy offload + * ii) jobs waiting for pages + * iii) jobs that have pages, and are waiting for the io to be issued. + * iv) jobs that don't need to do any IO and just run a callback + * v) jobs that have completed. * - * All four of these are protected by job_lock. + * All five of these are protected by job_lock. */ spinlock_t job_lock; struct list_head callback_jobs; struct list_head complete_jobs; + struct list_head copy_jobs; struct list_head io_jobs; struct list_head pages_jobs; }; @@ -579,6 +581,43 @@ static int run_io_job(struct kcopyd_job *job) return r; } +static int run_copy_job(struct kcopyd_job *job) +{ + int r, i, count = 0; + struct range_entry range; + + struct request_queue *src_q, *dest_q; + + for (i = 0; i < job->num_dests; i++) { + range.dst = job->dests[i].sector << SECTOR_SHIFT; + range.src = job->source.sector << SECTOR_SHIFT; + range.len = job->source.count << SECTOR_SHIFT; + + src_q = bdev_get_queue(job->source.bdev); + dest_q = bdev_get_queue(job->dests[i].bdev); + + if (src_q != dest_q || !blk_queue_copy(src_q)) + break; + + r = blkdev_issue_copy(job->source.bdev, job->dests[i].bdev, + &range, 1, NULL, NULL, GFP_KERNEL); + if (r) + break; + + job->dests[i].count = 0; + count++; + } + + if (count == job->num_dests) { + push(&job->kc->complete_jobs, job); + } else { + push(&job->kc->pages_jobs, job); + r = 0; + } + + return r; +} + static int run_pages_job(struct kcopyd_job *job) { int r; @@ -659,6 +698,7 @@ static void do_work(struct work_struct *work) spin_unlock_irq(&kc->job_lock); blk_start_plug(&plug); + process_jobs(&kc->copy_jobs, kc, run_copy_job); process_jobs(&kc->complete_jobs, kc, run_complete_job); process_jobs(&kc->pages_jobs, kc, run_pages_job); process_jobs(&kc->io_jobs, kc, run_io_job); @@ -676,6 +716,8 @@ static void dispatch_job(struct kcopyd_job *job) atomic_inc(&kc->nr_jobs); if (unlikely(!job->source.count)) push(&kc->callback_jobs, job); + else if (job->source.bdev->bd_disk == job->dests[0].bdev->bd_disk) + push(&kc->copy_jobs, job); else if (job->pages == &zero_page_list) push(&kc->io_jobs, job); else @@ -916,6 +958,7 @@ struct dm_kcopyd_client *dm_kcopyd_client_create(struct dm_kcopyd_throttle *thro spin_lock_init(&kc->job_lock); INIT_LIST_HEAD(&kc->callback_jobs); INIT_LIST_HEAD(&kc->complete_jobs); + INIT_LIST_HEAD(&kc->copy_jobs); INIT_LIST_HEAD(&kc->io_jobs); INIT_LIST_HEAD(&kc->pages_jobs); kc->throttle = throttle; @@ -971,6 +1014,7 @@ void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc) BUG_ON(!list_empty(&kc->callback_jobs)); BUG_ON(!list_empty(&kc->complete_jobs)); + WARN_ON(!list_empty(&kc->copy_jobs)); BUG_ON(!list_empty(&kc->io_jobs)); BUG_ON(!list_empty(&kc->pages_jobs)); destroy_workqueue(kc->kcopyd_wq); -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
[parent not found: <CGME20221123061044epcas5p2ac082a91fc8197821f29e84278b6203c@epcas5p2.samsung.com>]
* [PATCH v5 10/10] fs: add support for copy file range in zonefs [not found] ` <CGME20221123061044epcas5p2ac082a91fc8197821f29e84278b6203c@epcas5p2.samsung.com> @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev, Nitesh Shetty copy_file_range is implemented using copy offload, copy offloading to device is always enabled. To disable copy offloading mount with "no_copy_offload" mount option. At present copy offload is only used, if the source and destination files are on same block device, otherwise copy file range is completed by generic copy file range. copy file range implemented as following: - write pending writes on the src and dest files - drop page cache for dest file if its conv zone - copy the range using offload - update dest file info For all failure cases we fallback to generic file copy range At present this implementation does not support conv aggregation Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c index abc9a85106f2..15613433d4ae 100644 --- a/fs/zonefs/super.c +++ b/fs/zonefs/super.c @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) return 0; } +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, + struct inode *dst_inode, loff_t src_off, loff_t dst_off, + size_t *len) +{ + loff_t size, endoff; + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); + + inode_lock(src_inode); + size = i_size_read(src_inode); + inode_unlock(src_inode); + /* Don't copy beyond source file EOF. */ + if (src_off < size) { + if (src_off + *len > size) + *len = (size - (src_off + *len)); + } else + *len = 0; + + mutex_lock(&dst_zi->i_truncate_mutex); + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; + + if (dst_off != dst_zi->i_wpoffset) + goto err; + } + mutex_unlock(&dst_zi->i_truncate_mutex); + + endoff = dst_off + *len; + inode_lock(dst_inode); + if (endoff > dst_zi->i_max_size || + inode_newsize_ok(dst_inode, endoff)) { + inode_unlock(dst_inode); + goto err; + } + inode_unlock(dst_inode); + + return 0; +err: + mutex_unlock(&dst_zi->i_truncate_mutex); + return -EINVAL; +} + +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, + loff_t src_off, struct zonefs_inode_info *dst_zi, + loff_t dst_off, size_t len) +{ + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; + struct range_entry *rlist = NULL; + int ret = len; + + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); + if (!rlist) + return -ENOMEM; + + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; + rlist[0].len = len; + rlist[0].comp_len = 0; + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, + GFP_KERNEL); + if (rlist[0].comp_len > 0) + ret = rlist[0].comp_len; + kfree(rlist); + + return ret; +} + +/* Returns length of possible copy, else returns error */ +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, + struct file *dst_file, loff_t dst_off, + size_t *len, unsigned int flags) +{ + struct inode *src_inode = file_inode(src_file); + struct inode *dst_inode = file_inode(dst_file); + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); + ssize_t ret; + + if (src_inode->i_sb != dst_inode->i_sb) + return -EXDEV; + + /* Start by sync'ing the source and destination files for conv zones */ + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { + ret = file_write_and_wait_range(src_file, src_off, + (src_off + *len)); + if (ret < 0) + goto io_error; + } + inode_dio_wait(src_inode); + + /* Start by sync'ing the source and destination files ifor conv zones */ + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { + ret = file_write_and_wait_range(dst_file, dst_off, + (dst_off + *len)); + if (ret < 0) + goto io_error; + } + inode_dio_wait(dst_inode); + + /* Drop dst file cached pages for a conv zone*/ + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, + dst_off >> PAGE_SHIFT, + (dst_off + *len) >> PAGE_SHIFT); + if (ret < 0) + goto io_error; + } + + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, + dst_off, len); + if (ret < 0) + return ret; + + return *len; + +io_error: + zonefs_io_error(dst_inode, true); + return ret; +} + +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, + struct file *dst_file, loff_t dst_off, + size_t len, unsigned int flags) +{ + struct inode *src_inode = file_inode(src_file); + struct inode *dst_inode = file_inode(dst_file); + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); + ssize_t ret = 0, bytes; + + inode_lock(src_inode); + inode_lock(dst_inode); + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); + if (bytes < 0) + goto unlock_exit; + + ret += bytes; + + file_update_time(dst_file); + mutex_lock(&dst_zi->i_truncate_mutex); + zonefs_update_stats(dst_inode, dst_off + bytes); + zonefs_i_size_write(dst_inode, dst_off + bytes); + dst_zi->i_wpoffset += bytes; + mutex_unlock(&dst_zi->i_truncate_mutex); + /* if we still have some bytes left, do splice copy */ + if (bytes && (bytes < len)) { + bytes = do_splice_direct(src_file, &src_off, dst_file, + &dst_off, len, flags); + if (bytes > 0) + ret += bytes; + } +unlock_exit: + if (ret < 0) + zonefs_io_error(dst_inode, true); + inode_unlock(src_inode); + inode_unlock(dst_inode); + return ret; +} + +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, + struct file *dst_file, loff_t dst_off, + size_t len, unsigned int flags) +{ + ssize_t ret = -EIO; + + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, + &len, flags); + if (ret > 0) + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, + len, flags); + else if (ret < 0 && ret == -EXDEV) + ret = generic_copy_file_range(src_file, src_off, dst_file, + dst_off, len, flags); + return ret; +} + static const struct file_operations zonefs_file_operations = { .open = zonefs_file_open, .release = zonefs_file_release, @@ -1234,6 +1411,7 @@ static const struct file_operations zonefs_file_operations = { .splice_read = generic_file_splice_read, .splice_write = iter_file_splice_write, .iopoll = iocb_bio_iopoll, + .copy_file_range = zonefs_copy_file_range, }; static struct kmem_cache *zonefs_inode_cachep; @@ -1804,6 +1982,7 @@ static int zonefs_fill_super(struct super_block *sb, void *data, int silent) atomic_set(&sbi->s_active_seq_files, 0); sbi->s_max_active_seq_files = bdev_max_active_zones(sb->s_bdev); + /* set copy support by default */ ret = zonefs_read_super(sb); if (ret) return ret; -- 2.35.1.500.gb896f729e2 ^ permalink raw reply related [flat|nested] 67+ messages in thread
* [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-23 5:58 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 5:58 UTC (permalink / raw) To: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, Nitesh Shetty, linux-block, linux-fsdevel, nitheshshetty copy_file_range is implemented using copy offload, copy offloading to device is always enabled. To disable copy offloading mount with "no_copy_offload" mount option. At present copy offload is only used, if the source and destination files are on same block device, otherwise copy file range is completed by generic copy file range. copy file range implemented as following: - write pending writes on the src and dest files - drop page cache for dest file if its conv zone - copy the range using offload - update dest file info For all failure cases we fallback to generic file copy range At present this implementation does not support conv aggregation Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> --- fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c index abc9a85106f2..15613433d4ae 100644 --- a/fs/zonefs/super.c +++ b/fs/zonefs/super.c @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) return 0; } +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, + struct inode *dst_inode, loff_t src_off, loff_t dst_off, + size_t *len) +{ + loff_t size, endoff; + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); + + inode_lock(src_inode); + size = i_size_read(src_inode); + inode_unlock(src_inode); + /* Don't copy beyond source file EOF. */ + if (src_off < size) { + if (src_off + *len > size) + *len = (size - (src_off + *len)); + } else + *len = 0; + + mutex_lock(&dst_zi->i_truncate_mutex); + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; + + if (dst_off != dst_zi->i_wpoffset) + goto err; + } + mutex_unlock(&dst_zi->i_truncate_mutex); + + endoff = dst_off + *len; + inode_lock(dst_inode); + if (endoff > dst_zi->i_max_size || + inode_newsize_ok(dst_inode, endoff)) { + inode_unlock(dst_inode); + goto err; + } + inode_unlock(dst_inode); + + return 0; +err: + mutex_unlock(&dst_zi->i_truncate_mutex); + return -EINVAL; +} + +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, + loff_t src_off, struct zonefs_inode_info *dst_zi, + loff_t dst_off, size_t len) +{ + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; + struct range_entry *rlist = NULL; + int ret = len; + + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); + if (!rlist) + return -ENOMEM; + + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; + rlist[0].len = len; + rlist[0].comp_len = 0; + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, + GFP_KERNEL); + if (rlist[0].comp_len > 0) + ret = rlist[0].comp_len; + kfree(rlist); + + return ret; +} + +/* Returns length of possible copy, else returns error */ +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, + struct file *dst_file, loff_t dst_off, + size_t *len, unsigned int flags) +{ + struct inode *src_inode = file_inode(src_file); + struct inode *dst_inode = file_inode(dst_file); + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); + ssize_t ret; + + if (src_inode->i_sb != dst_inode->i_sb) + return -EXDEV; + + /* Start by sync'ing the source and destination files for conv zones */ + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { + ret = file_write_and_wait_range(src_file, src_off, + (src_off + *len)); + if (ret < 0) + goto io_error; + } + inode_dio_wait(src_inode); + + /* Start by sync'ing the source and destination files ifor conv zones */ + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { + ret = file_write_and_wait_range(dst_file, dst_off, + (dst_off + *len)); + if (ret < 0) + goto io_error; + } + inode_dio_wait(dst_inode); + + /* Drop dst file cached pages for a conv zone*/ + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, + dst_off >> PAGE_SHIFT, + (dst_off + *len) >> PAGE_SHIFT); + if (ret < 0) + goto io_error; + } + + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, + dst_off, len); + if (ret < 0) + return ret; + + return *len; + +io_error: + zonefs_io_error(dst_inode, true); + return ret; +} + +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, + struct file *dst_file, loff_t dst_off, + size_t len, unsigned int flags) +{ + struct inode *src_inode = file_inode(src_file); + struct inode *dst_inode = file_inode(dst_file); + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); + ssize_t ret = 0, bytes; + + inode_lock(src_inode); + inode_lock(dst_inode); + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); + if (bytes < 0) + goto unlock_exit; + + ret += bytes; + + file_update_time(dst_file); + mutex_lock(&dst_zi->i_truncate_mutex); + zonefs_update_stats(dst_inode, dst_off + bytes); + zonefs_i_size_write(dst_inode, dst_off + bytes); + dst_zi->i_wpoffset += bytes; + mutex_unlock(&dst_zi->i_truncate_mutex); + /* if we still have some bytes left, do splice copy */ + if (bytes && (bytes < len)) { + bytes = do_splice_direct(src_file, &src_off, dst_file, + &dst_off, len, flags); + if (bytes > 0) + ret += bytes; + } +unlock_exit: + if (ret < 0) + zonefs_io_error(dst_inode, true); + inode_unlock(src_inode); + inode_unlock(dst_inode); + return ret; +} + +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, + struct file *dst_file, loff_t dst_off, + size_t len, unsigned int flags) +{ + ssize_t ret = -EIO; + + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, + &len, flags); + if (ret > 0) + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, + len, flags); + else if (ret < 0 && ret == -EXDEV) + ret = generic_copy_file_range(src_file, src_off, dst_file, + dst_off, len, flags); + return ret; +} + static const struct file_operations zonefs_file_operations = { .open = zonefs_file_open, .release = zonefs_file_release, @@ -1234,6 +1411,7 @@ static const struct file_operations zonefs_file_operations = { .splice_read = generic_file_splice_read, .splice_write = iter_file_splice_write, .iopoll = iocb_bio_iopoll, + .copy_file_range = zonefs_copy_file_range, }; static struct kmem_cache *zonefs_inode_cachep; @@ -1804,6 +1982,7 @@ static int zonefs_fill_super(struct super_block *sb, void *data, int silent) atomic_set(&sbi->s_active_seq_files, 0); sbi->s_max_active_seq_files = bdev_max_active_zones(sb->s_bdev); + /* set copy support by default */ ret = zonefs_read_super(sb); if (ret) return ret; -- 2.35.1.500.gb896f729e2 -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply related [flat|nested] 67+ messages in thread
* Re: [PATCH v5 10/10] fs: add support for copy file range in zonefs 2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty @ 2022-11-23 6:53 ` Amir Goldstein -1 siblings, 0 replies; 67+ messages in thread From: Amir Goldstein @ 2022-11-23 6:53 UTC (permalink / raw) To: Nitesh Shetty Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev On Wed, Nov 23, 2022 at 8:26 AM Nitesh Shetty <nj.shetty@samsung.com> wrote: > > copy_file_range is implemented using copy offload, > copy offloading to device is always enabled. > To disable copy offloading mount with "no_copy_offload" mount option. > At present copy offload is only used, if the source and destination files > are on same block device, otherwise copy file range is completed by > generic copy file range. > > copy file range implemented as following: > - write pending writes on the src and dest files > - drop page cache for dest file if its conv zone > - copy the range using offload > - update dest file info > > For all failure cases we fallback to generic file copy range > At present this implementation does not support conv aggregation > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> > --- > fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 179 insertions(+) > > diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c > index abc9a85106f2..15613433d4ae 100644 > --- a/fs/zonefs/super.c > +++ b/fs/zonefs/super.c > @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) > return 0; > } > > +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, > + struct inode *dst_inode, loff_t src_off, loff_t dst_off, > + size_t *len) > +{ > + loff_t size, endoff; > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + > + inode_lock(src_inode); > + size = i_size_read(src_inode); > + inode_unlock(src_inode); > + /* Don't copy beyond source file EOF. */ > + if (src_off < size) { > + if (src_off + *len > size) > + *len = (size - (src_off + *len)); > + } else > + *len = 0; > + > + mutex_lock(&dst_zi->i_truncate_mutex); > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { > + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) > + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; > + > + if (dst_off != dst_zi->i_wpoffset) > + goto err; > + } > + mutex_unlock(&dst_zi->i_truncate_mutex); > + > + endoff = dst_off + *len; > + inode_lock(dst_inode); > + if (endoff > dst_zi->i_max_size || > + inode_newsize_ok(dst_inode, endoff)) { > + inode_unlock(dst_inode); > + goto err; > + } > + inode_unlock(dst_inode); > + > + return 0; > +err: > + mutex_unlock(&dst_zi->i_truncate_mutex); > + return -EINVAL; > +} > + > +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, > + loff_t src_off, struct zonefs_inode_info *dst_zi, > + loff_t dst_off, size_t len) > +{ > + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; > + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; > + struct range_entry *rlist = NULL; > + int ret = len; > + > + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); > + if (!rlist) > + return -ENOMEM; > + > + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; > + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; > + rlist[0].len = len; > + rlist[0].comp_len = 0; > + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, > + GFP_KERNEL); > + if (rlist[0].comp_len > 0) > + ret = rlist[0].comp_len; > + kfree(rlist); > + > + return ret; > +} > + > +/* Returns length of possible copy, else returns error */ > +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t *len, unsigned int flags) > +{ > + struct inode *src_inode = file_inode(src_file); > + struct inode *dst_inode = file_inode(dst_file); > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + ssize_t ret; > + > + if (src_inode->i_sb != dst_inode->i_sb) > + return -EXDEV; > + > + /* Start by sync'ing the source and destination files for conv zones */ > + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = file_write_and_wait_range(src_file, src_off, > + (src_off + *len)); > + if (ret < 0) > + goto io_error; > + } > + inode_dio_wait(src_inode); > + > + /* Start by sync'ing the source and destination files ifor conv zones */ > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = file_write_and_wait_range(dst_file, dst_off, > + (dst_off + *len)); > + if (ret < 0) > + goto io_error; > + } > + inode_dio_wait(dst_inode); > + > + /* Drop dst file cached pages for a conv zone*/ > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, > + dst_off >> PAGE_SHIFT, > + (dst_off + *len) >> PAGE_SHIFT); > + if (ret < 0) > + goto io_error; > + } > + > + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, > + dst_off, len); > + if (ret < 0) > + return ret; > + > + return *len; > + > +io_error: > + zonefs_io_error(dst_inode, true); > + return ret; > +} > + > +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t len, unsigned int flags) > +{ > + struct inode *src_inode = file_inode(src_file); > + struct inode *dst_inode = file_inode(dst_file); > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + ssize_t ret = 0, bytes; > + > + inode_lock(src_inode); > + inode_lock(dst_inode); > + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); > + if (bytes < 0) > + goto unlock_exit; > + > + ret += bytes; > + > + file_update_time(dst_file); > + mutex_lock(&dst_zi->i_truncate_mutex); > + zonefs_update_stats(dst_inode, dst_off + bytes); > + zonefs_i_size_write(dst_inode, dst_off + bytes); > + dst_zi->i_wpoffset += bytes; > + mutex_unlock(&dst_zi->i_truncate_mutex); > + /* if we still have some bytes left, do splice copy */ > + if (bytes && (bytes < len)) { > + bytes = do_splice_direct(src_file, &src_off, dst_file, > + &dst_off, len, flags); > + if (bytes > 0) > + ret += bytes; > + } > +unlock_exit: > + if (ret < 0) > + zonefs_io_error(dst_inode, true); > + inode_unlock(src_inode); > + inode_unlock(dst_inode); > + return ret; > +} > + > +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t len, unsigned int flags) > +{ > + ssize_t ret = -EIO; > + > + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, > + &len, flags); > + if (ret > 0) > + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, > + len, flags); > + else if (ret < 0 && ret == -EXDEV) First of all, ret < 0 is redundant. > + ret = generic_copy_file_range(src_file, src_off, dst_file, > + dst_off, len, flags); But more importantly, why do you want to fall back to do_splice_direct() in zonefs copy_file_range? How does it serve your patch set or the prospect consumers of zonefs copy_file_range? The reason I am asking is because commit 5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices") turned out to be an API mistake that was later reverted by 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies") It is always better to return EXDEV to userspace which can always fallback to splice itself, but maybe it has something smarter to do. The places where it made sense for kernel to fallback to direct splice was for network servers server-side-copy, but that is independent of any specific filesystem copy_file_range() implementation. Thanks, Amir. ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-23 6:53 ` Amir Goldstein 0 siblings, 0 replies; 67+ messages in thread From: Amir Goldstein @ 2022-11-23 6:53 UTC (permalink / raw) To: Nitesh Shetty Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty On Wed, Nov 23, 2022 at 8:26 AM Nitesh Shetty <nj.shetty@samsung.com> wrote: > > copy_file_range is implemented using copy offload, > copy offloading to device is always enabled. > To disable copy offloading mount with "no_copy_offload" mount option. > At present copy offload is only used, if the source and destination files > are on same block device, otherwise copy file range is completed by > generic copy file range. > > copy file range implemented as following: > - write pending writes on the src and dest files > - drop page cache for dest file if its conv zone > - copy the range using offload > - update dest file info > > For all failure cases we fallback to generic file copy range > At present this implementation does not support conv aggregation > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> > --- > fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 179 insertions(+) > > diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c > index abc9a85106f2..15613433d4ae 100644 > --- a/fs/zonefs/super.c > +++ b/fs/zonefs/super.c > @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) > return 0; > } > > +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, > + struct inode *dst_inode, loff_t src_off, loff_t dst_off, > + size_t *len) > +{ > + loff_t size, endoff; > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + > + inode_lock(src_inode); > + size = i_size_read(src_inode); > + inode_unlock(src_inode); > + /* Don't copy beyond source file EOF. */ > + if (src_off < size) { > + if (src_off + *len > size) > + *len = (size - (src_off + *len)); > + } else > + *len = 0; > + > + mutex_lock(&dst_zi->i_truncate_mutex); > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { > + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) > + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; > + > + if (dst_off != dst_zi->i_wpoffset) > + goto err; > + } > + mutex_unlock(&dst_zi->i_truncate_mutex); > + > + endoff = dst_off + *len; > + inode_lock(dst_inode); > + if (endoff > dst_zi->i_max_size || > + inode_newsize_ok(dst_inode, endoff)) { > + inode_unlock(dst_inode); > + goto err; > + } > + inode_unlock(dst_inode); > + > + return 0; > +err: > + mutex_unlock(&dst_zi->i_truncate_mutex); > + return -EINVAL; > +} > + > +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, > + loff_t src_off, struct zonefs_inode_info *dst_zi, > + loff_t dst_off, size_t len) > +{ > + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; > + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; > + struct range_entry *rlist = NULL; > + int ret = len; > + > + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); > + if (!rlist) > + return -ENOMEM; > + > + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; > + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; > + rlist[0].len = len; > + rlist[0].comp_len = 0; > + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, > + GFP_KERNEL); > + if (rlist[0].comp_len > 0) > + ret = rlist[0].comp_len; > + kfree(rlist); > + > + return ret; > +} > + > +/* Returns length of possible copy, else returns error */ > +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t *len, unsigned int flags) > +{ > + struct inode *src_inode = file_inode(src_file); > + struct inode *dst_inode = file_inode(dst_file); > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + ssize_t ret; > + > + if (src_inode->i_sb != dst_inode->i_sb) > + return -EXDEV; > + > + /* Start by sync'ing the source and destination files for conv zones */ > + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = file_write_and_wait_range(src_file, src_off, > + (src_off + *len)); > + if (ret < 0) > + goto io_error; > + } > + inode_dio_wait(src_inode); > + > + /* Start by sync'ing the source and destination files ifor conv zones */ > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = file_write_and_wait_range(dst_file, dst_off, > + (dst_off + *len)); > + if (ret < 0) > + goto io_error; > + } > + inode_dio_wait(dst_inode); > + > + /* Drop dst file cached pages for a conv zone*/ > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, > + dst_off >> PAGE_SHIFT, > + (dst_off + *len) >> PAGE_SHIFT); > + if (ret < 0) > + goto io_error; > + } > + > + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, > + dst_off, len); > + if (ret < 0) > + return ret; > + > + return *len; > + > +io_error: > + zonefs_io_error(dst_inode, true); > + return ret; > +} > + > +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t len, unsigned int flags) > +{ > + struct inode *src_inode = file_inode(src_file); > + struct inode *dst_inode = file_inode(dst_file); > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + ssize_t ret = 0, bytes; > + > + inode_lock(src_inode); > + inode_lock(dst_inode); > + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); > + if (bytes < 0) > + goto unlock_exit; > + > + ret += bytes; > + > + file_update_time(dst_file); > + mutex_lock(&dst_zi->i_truncate_mutex); > + zonefs_update_stats(dst_inode, dst_off + bytes); > + zonefs_i_size_write(dst_inode, dst_off + bytes); > + dst_zi->i_wpoffset += bytes; > + mutex_unlock(&dst_zi->i_truncate_mutex); > + /* if we still have some bytes left, do splice copy */ > + if (bytes && (bytes < len)) { > + bytes = do_splice_direct(src_file, &src_off, dst_file, > + &dst_off, len, flags); > + if (bytes > 0) > + ret += bytes; > + } > +unlock_exit: > + if (ret < 0) > + zonefs_io_error(dst_inode, true); > + inode_unlock(src_inode); > + inode_unlock(dst_inode); > + return ret; > +} > + > +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t len, unsigned int flags) > +{ > + ssize_t ret = -EIO; > + > + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, > + &len, flags); > + if (ret > 0) > + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, > + len, flags); > + else if (ret < 0 && ret == -EXDEV) First of all, ret < 0 is redundant. > + ret = generic_copy_file_range(src_file, src_off, dst_file, > + dst_off, len, flags); But more importantly, why do you want to fall back to do_splice_direct() in zonefs copy_file_range? How does it serve your patch set or the prospect consumers of zonefs copy_file_range? The reason I am asking is because commit 5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices") turned out to be an API mistake that was later reverted by 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies") It is always better to return EXDEV to userspace which can always fallback to splice itself, but maybe it has something smarter to do. The places where it made sense for kernel to fallback to direct splice was for network servers server-side-copy, but that is independent of any specific filesystem copy_file_range() implementation. Thanks, Amir. -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 10/10] fs: add support for copy file range in zonefs 2022-11-23 6:53 ` [dm-devel] " Amir Goldstein @ 2022-11-23 10:13 ` Nitesh Shetty -1 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 10:13 UTC (permalink / raw) To: Amir Goldstein Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, damien.lemoal, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev [-- Attachment #1: Type: text/plain, Size: 9677 bytes --] On Wed, Nov 23, 2022 at 08:53:14AM +0200, Amir Goldstein wrote: > On Wed, Nov 23, 2022 at 8:26 AM Nitesh Shetty <nj.shetty@samsung.com> wrote: > > > > copy_file_range is implemented using copy offload, > > copy offloading to device is always enabled. > > To disable copy offloading mount with "no_copy_offload" mount option. > > At present copy offload is only used, if the source and destination files > > are on same block device, otherwise copy file range is completed by > > generic copy file range. > > > > copy file range implemented as following: > > - write pending writes on the src and dest files > > - drop page cache for dest file if its conv zone > > - copy the range using offload > > - update dest file info > > > > For all failure cases we fallback to generic file copy range > > At present this implementation does not support conv aggregation > > > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > > Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> > > --- > > fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 179 insertions(+) > > > > diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c > > index abc9a85106f2..15613433d4ae 100644 > > --- a/fs/zonefs/super.c > > +++ b/fs/zonefs/super.c > > @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) > > return 0; > > } > > > > +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, > > + struct inode *dst_inode, loff_t src_off, loff_t dst_off, > > + size_t *len) > > +{ > > + loff_t size, endoff; > > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > > + > > + inode_lock(src_inode); > > + size = i_size_read(src_inode); > > + inode_unlock(src_inode); > > + /* Don't copy beyond source file EOF. */ > > + if (src_off < size) { > > + if (src_off + *len > size) > > + *len = (size - (src_off + *len)); > > + } else > > + *len = 0; > > + > > + mutex_lock(&dst_zi->i_truncate_mutex); > > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { > > + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) > > + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; > > + > > + if (dst_off != dst_zi->i_wpoffset) > > + goto err; > > + } > > + mutex_unlock(&dst_zi->i_truncate_mutex); > > + > > + endoff = dst_off + *len; > > + inode_lock(dst_inode); > > + if (endoff > dst_zi->i_max_size || > > + inode_newsize_ok(dst_inode, endoff)) { > > + inode_unlock(dst_inode); > > + goto err; > > + } > > + inode_unlock(dst_inode); > > + > > + return 0; > > +err: > > + mutex_unlock(&dst_zi->i_truncate_mutex); > > + return -EINVAL; > > +} > > + > > +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, > > + loff_t src_off, struct zonefs_inode_info *dst_zi, > > + loff_t dst_off, size_t len) > > +{ > > + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; > > + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; > > + struct range_entry *rlist = NULL; > > + int ret = len; > > + > > + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); > > + if (!rlist) > > + return -ENOMEM; > > + > > + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; > > + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; > > + rlist[0].len = len; > > + rlist[0].comp_len = 0; > > + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, > > + GFP_KERNEL); > > + if (rlist[0].comp_len > 0) > > + ret = rlist[0].comp_len; > > + kfree(rlist); > > + > > + return ret; > > +} > > + > > +/* Returns length of possible copy, else returns error */ > > +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, > > + struct file *dst_file, loff_t dst_off, > > + size_t *len, unsigned int flags) > > +{ > > + struct inode *src_inode = file_inode(src_file); > > + struct inode *dst_inode = file_inode(dst_file); > > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > > + ssize_t ret; > > + > > + if (src_inode->i_sb != dst_inode->i_sb) > > + return -EXDEV; > > + > > + /* Start by sync'ing the source and destination files for conv zones */ > > + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > > + ret = file_write_and_wait_range(src_file, src_off, > > + (src_off + *len)); > > + if (ret < 0) > > + goto io_error; > > + } > > + inode_dio_wait(src_inode); > > + > > + /* Start by sync'ing the source and destination files ifor conv zones */ > > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > > + ret = file_write_and_wait_range(dst_file, dst_off, > > + (dst_off + *len)); > > + if (ret < 0) > > + goto io_error; > > + } > > + inode_dio_wait(dst_inode); > > + > > + /* Drop dst file cached pages for a conv zone*/ > > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > > + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, > > + dst_off >> PAGE_SHIFT, > > + (dst_off + *len) >> PAGE_SHIFT); > > + if (ret < 0) > > + goto io_error; > > + } > > + > > + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, > > + dst_off, len); > > + if (ret < 0) > > + return ret; > > + > > + return *len; > > + > > +io_error: > > + zonefs_io_error(dst_inode, true); > > + return ret; > > +} > > + > > +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, > > + struct file *dst_file, loff_t dst_off, > > + size_t len, unsigned int flags) > > +{ > > + struct inode *src_inode = file_inode(src_file); > > + struct inode *dst_inode = file_inode(dst_file); > > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > > + ssize_t ret = 0, bytes; > > + > > + inode_lock(src_inode); > > + inode_lock(dst_inode); > > + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); > > + if (bytes < 0) > > + goto unlock_exit; > > + > > + ret += bytes; > > + > > + file_update_time(dst_file); > > + mutex_lock(&dst_zi->i_truncate_mutex); > > + zonefs_update_stats(dst_inode, dst_off + bytes); > > + zonefs_i_size_write(dst_inode, dst_off + bytes); > > + dst_zi->i_wpoffset += bytes; > > + mutex_unlock(&dst_zi->i_truncate_mutex); > > + /* if we still have some bytes left, do splice copy */ > > + if (bytes && (bytes < len)) { > > + bytes = do_splice_direct(src_file, &src_off, dst_file, > > + &dst_off, len, flags); > > + if (bytes > 0) > > + ret += bytes; > > + } > > +unlock_exit: > > + if (ret < 0) > > + zonefs_io_error(dst_inode, true); > > + inode_unlock(src_inode); > > + inode_unlock(dst_inode); > > + return ret; > > +} > > + > > +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, > > + struct file *dst_file, loff_t dst_off, > > + size_t len, unsigned int flags) > > +{ > > + ssize_t ret = -EIO; > > + > > + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, > > + &len, flags); > > + if (ret > 0) > > + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, > > + len, flags); > > + else if (ret < 0 && ret == -EXDEV) > > First of all, ret < 0 is redundant. > acked > > + ret = generic_copy_file_range(src_file, src_off, dst_file, > > + dst_off, len, flags); > > But more importantly, why do you want to fall back to > do_splice_direct() in zonefs copy_file_range? > How does it serve your patch set or the prospect consumers > of zonefs copy_file_range? > > The reason I am asking is because commit 5dae222a5ff0 > ("vfs: allow copy_file_range to copy across devices") > turned out to be an API mistake that was later reverted by > 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies") > > It is always better to return EXDEV to userspace which can > always fallback to splice itself, but maybe it has something > smarter to do. > > The places where it made sense for kernel to fallback to > direct splice was for network servers server-side-copy, but that > is independent of any specific filesystem copy_file_range() > implementation. > > Thanks, > Amir. > At present we don't handle few case's such as IO getting split incase of copy offload, so we wanted to fallback to existing mechanism. So went with default operation, do_splice_direct. Regards, Nitesh Shetty [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-23 10:13 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-23 10:13 UTC (permalink / raw) To: Amir Goldstein Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, damien.lemoal, james.smart, p.raghav, kch, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, nitheshshetty [-- Attachment #1: Type: text/plain, Size: 9677 bytes --] On Wed, Nov 23, 2022 at 08:53:14AM +0200, Amir Goldstein wrote: > On Wed, Nov 23, 2022 at 8:26 AM Nitesh Shetty <nj.shetty@samsung.com> wrote: > > > > copy_file_range is implemented using copy offload, > > copy offloading to device is always enabled. > > To disable copy offloading mount with "no_copy_offload" mount option. > > At present copy offload is only used, if the source and destination files > > are on same block device, otherwise copy file range is completed by > > generic copy file range. > > > > copy file range implemented as following: > > - write pending writes on the src and dest files > > - drop page cache for dest file if its conv zone > > - copy the range using offload > > - update dest file info > > > > For all failure cases we fallback to generic file copy range > > At present this implementation does not support conv aggregation > > > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > > Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> > > --- > > fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 179 insertions(+) > > > > diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c > > index abc9a85106f2..15613433d4ae 100644 > > --- a/fs/zonefs/super.c > > +++ b/fs/zonefs/super.c > > @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) > > return 0; > > } > > > > +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, > > + struct inode *dst_inode, loff_t src_off, loff_t dst_off, > > + size_t *len) > > +{ > > + loff_t size, endoff; > > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > > + > > + inode_lock(src_inode); > > + size = i_size_read(src_inode); > > + inode_unlock(src_inode); > > + /* Don't copy beyond source file EOF. */ > > + if (src_off < size) { > > + if (src_off + *len > size) > > + *len = (size - (src_off + *len)); > > + } else > > + *len = 0; > > + > > + mutex_lock(&dst_zi->i_truncate_mutex); > > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { > > + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) > > + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; > > + > > + if (dst_off != dst_zi->i_wpoffset) > > + goto err; > > + } > > + mutex_unlock(&dst_zi->i_truncate_mutex); > > + > > + endoff = dst_off + *len; > > + inode_lock(dst_inode); > > + if (endoff > dst_zi->i_max_size || > > + inode_newsize_ok(dst_inode, endoff)) { > > + inode_unlock(dst_inode); > > + goto err; > > + } > > + inode_unlock(dst_inode); > > + > > + return 0; > > +err: > > + mutex_unlock(&dst_zi->i_truncate_mutex); > > + return -EINVAL; > > +} > > + > > +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, > > + loff_t src_off, struct zonefs_inode_info *dst_zi, > > + loff_t dst_off, size_t len) > > +{ > > + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; > > + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; > > + struct range_entry *rlist = NULL; > > + int ret = len; > > + > > + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); > > + if (!rlist) > > + return -ENOMEM; > > + > > + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; > > + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; > > + rlist[0].len = len; > > + rlist[0].comp_len = 0; > > + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, > > + GFP_KERNEL); > > + if (rlist[0].comp_len > 0) > > + ret = rlist[0].comp_len; > > + kfree(rlist); > > + > > + return ret; > > +} > > + > > +/* Returns length of possible copy, else returns error */ > > +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, > > + struct file *dst_file, loff_t dst_off, > > + size_t *len, unsigned int flags) > > +{ > > + struct inode *src_inode = file_inode(src_file); > > + struct inode *dst_inode = file_inode(dst_file); > > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > > + ssize_t ret; > > + > > + if (src_inode->i_sb != dst_inode->i_sb) > > + return -EXDEV; > > + > > + /* Start by sync'ing the source and destination files for conv zones */ > > + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > > + ret = file_write_and_wait_range(src_file, src_off, > > + (src_off + *len)); > > + if (ret < 0) > > + goto io_error; > > + } > > + inode_dio_wait(src_inode); > > + > > + /* Start by sync'ing the source and destination files ifor conv zones */ > > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > > + ret = file_write_and_wait_range(dst_file, dst_off, > > + (dst_off + *len)); > > + if (ret < 0) > > + goto io_error; > > + } > > + inode_dio_wait(dst_inode); > > + > > + /* Drop dst file cached pages for a conv zone*/ > > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > > + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, > > + dst_off >> PAGE_SHIFT, > > + (dst_off + *len) >> PAGE_SHIFT); > > + if (ret < 0) > > + goto io_error; > > + } > > + > > + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, > > + dst_off, len); > > + if (ret < 0) > > + return ret; > > + > > + return *len; > > + > > +io_error: > > + zonefs_io_error(dst_inode, true); > > + return ret; > > +} > > + > > +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, > > + struct file *dst_file, loff_t dst_off, > > + size_t len, unsigned int flags) > > +{ > > + struct inode *src_inode = file_inode(src_file); > > + struct inode *dst_inode = file_inode(dst_file); > > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > > + ssize_t ret = 0, bytes; > > + > > + inode_lock(src_inode); > > + inode_lock(dst_inode); > > + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); > > + if (bytes < 0) > > + goto unlock_exit; > > + > > + ret += bytes; > > + > > + file_update_time(dst_file); > > + mutex_lock(&dst_zi->i_truncate_mutex); > > + zonefs_update_stats(dst_inode, dst_off + bytes); > > + zonefs_i_size_write(dst_inode, dst_off + bytes); > > + dst_zi->i_wpoffset += bytes; > > + mutex_unlock(&dst_zi->i_truncate_mutex); > > + /* if we still have some bytes left, do splice copy */ > > + if (bytes && (bytes < len)) { > > + bytes = do_splice_direct(src_file, &src_off, dst_file, > > + &dst_off, len, flags); > > + if (bytes > 0) > > + ret += bytes; > > + } > > +unlock_exit: > > + if (ret < 0) > > + zonefs_io_error(dst_inode, true); > > + inode_unlock(src_inode); > > + inode_unlock(dst_inode); > > + return ret; > > +} > > + > > +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, > > + struct file *dst_file, loff_t dst_off, > > + size_t len, unsigned int flags) > > +{ > > + ssize_t ret = -EIO; > > + > > + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, > > + &len, flags); > > + if (ret > 0) > > + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, > > + len, flags); > > + else if (ret < 0 && ret == -EXDEV) > > First of all, ret < 0 is redundant. > acked > > + ret = generic_copy_file_range(src_file, src_off, dst_file, > > + dst_off, len, flags); > > But more importantly, why do you want to fall back to > do_splice_direct() in zonefs copy_file_range? > How does it serve your patch set or the prospect consumers > of zonefs copy_file_range? > > The reason I am asking is because commit 5dae222a5ff0 > ("vfs: allow copy_file_range to copy across devices") > turned out to be an API mistake that was later reverted by > 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies") > > It is always better to return EXDEV to userspace which can > always fallback to splice itself, but maybe it has something > smarter to do. > > The places where it made sense for kernel to fallback to > direct splice was for network servers server-side-copy, but that > is independent of any specific filesystem copy_file_range() > implementation. > > Thanks, > Amir. > At present we don't handle few case's such as IO getting split incase of copy offload, so we wanted to fallback to existing mechanism. So went with default operation, do_splice_direct. Regards, Nitesh Shetty [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 10/10] fs: add support for copy file range in zonefs 2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty @ 2022-11-24 1:32 ` Damien Le Moal -1 siblings, 0 replies; 67+ messages in thread From: Damien Le Moal @ 2022-11-24 1:32 UTC (permalink / raw) To: Nitesh Shetty, axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev On 11/23/22 14:58, Nitesh Shetty wrote: > copy_file_range is implemented using copy offload, > copy offloading to device is always enabled. > To disable copy offloading mount with "no_copy_offload" mount option. And were is the code that handle this option ? > At present copy offload is only used, if the source and destination files > are on same block device, otherwise copy file range is completed by > generic copy file range. > > copy file range implemented as following: > - write pending writes on the src and dest files > - drop page cache for dest file if its conv zone > - copy the range using offload > - update dest file info > > For all failure cases we fallback to generic file copy range For all cases ? That would be weird. What would be the point of trying to copy again if e.g. the dest zone has gone offline or read only ? > At present this implementation does not support conv aggregation Please check this commit message overall: the grammar and punctuation could really be improved. > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> > --- > fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 179 insertions(+) > > diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c > index abc9a85106f2..15613433d4ae 100644 > --- a/fs/zonefs/super.c > +++ b/fs/zonefs/super.c > @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) > return 0; > } > > +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, > + struct inode *dst_inode, loff_t src_off, loff_t dst_off, > + size_t *len) > +{ > + loff_t size, endoff; > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + > + inode_lock(src_inode); > + size = i_size_read(src_inode); > + inode_unlock(src_inode); > + /* Don't copy beyond source file EOF. */ > + if (src_off < size) { > + if (src_off + *len > size) > + *len = (size - (src_off + *len)); > + } else > + *len = 0; Missing curly brackets for the else. > + > + mutex_lock(&dst_zi->i_truncate_mutex); > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { > + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) > + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; > + > + if (dst_off != dst_zi->i_wpoffset) > + goto err; > + } > + mutex_unlock(&dst_zi->i_truncate_mutex); > + > + endoff = dst_off + *len; > + inode_lock(dst_inode); > + if (endoff > dst_zi->i_max_size || > + inode_newsize_ok(dst_inode, endoff)) { > + inode_unlock(dst_inode); > + goto err; And here truncate mutex is not locked, but goto err will unlock it. This is broken... > + } > + inode_unlock(dst_inode); ...The locking is completely broken in this function anyway. You take the lock, look at something, then release the lock. Then what if a write or a trunctate comes in when the inode is not locked ? This is completely broken. The inode should be locked with no dio pending when this function is called. This is only to check if everything is ok. This has no business playing with the inode and truncate locks. > + > + return 0; > +err: > + mutex_unlock(&dst_zi->i_truncate_mutex); > + return -EINVAL; > +} > + > +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, > + loff_t src_off, struct zonefs_inode_info *dst_zi, > + loff_t dst_off, size_t len) > +{ > + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; > + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; > + struct range_entry *rlist = NULL; > + int ret = len; > + > + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); GFP_NOIO ? > + if (!rlist) > + return -ENOMEM; > + > + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; > + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; > + rlist[0].len = len; > + rlist[0].comp_len = 0; > + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, > + GFP_KERNEL); > + if (rlist[0].comp_len > 0) > + ret = rlist[0].comp_len; > + kfree(rlist); > + > + return ret; > +} > + > +/* Returns length of possible copy, else returns error */ > +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t *len, unsigned int flags) > +{ > + struct inode *src_inode = file_inode(src_file); > + struct inode *dst_inode = file_inode(dst_file); > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + ssize_t ret; > + > + if (src_inode->i_sb != dst_inode->i_sb) > + return -EXDEV; > + > + /* Start by sync'ing the source and destination files for conv zones */ > + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = file_write_and_wait_range(src_file, src_off, > + (src_off + *len)); > + if (ret < 0) > + goto io_error; > + } > + inode_dio_wait(src_inode); That is not a "check". So having this in a function called zonefs_copy_file_checks() is a little strange. > + > + /* Start by sync'ing the source and destination files ifor conv zones */ Same comment repeated, with typos. > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = file_write_and_wait_range(dst_file, dst_off, > + (dst_off + *len)); > + if (ret < 0) > + goto io_error; > + } > + inode_dio_wait(dst_inode); > + > + /* Drop dst file cached pages for a conv zone*/ > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, > + dst_off >> PAGE_SHIFT, > + (dst_off + *len) >> PAGE_SHIFT); > + if (ret < 0) > + goto io_error; > + } > + > + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, > + dst_off, len); > + if (ret < 0) if (ret) > + return ret; > + > + return *len; > + > +io_error: > + zonefs_io_error(dst_inode, true); > + return ret; > +} > + > +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t len, unsigned int flags) > +{ > + struct inode *src_inode = file_inode(src_file); > + struct inode *dst_inode = file_inode(dst_file); > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + ssize_t ret = 0, bytes; > + > + inode_lock(src_inode); > + inode_lock(dst_inode); So you did zonefs_copy_file_checks() outside of these locks, which mean that everything about the source and destination files may have changed. This does not work. > + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); > + if (bytes < 0) > + goto unlock_exit; > + > + ret += bytes; > + > + file_update_time(dst_file); > + mutex_lock(&dst_zi->i_truncate_mutex); > + zonefs_update_stats(dst_inode, dst_off + bytes); > + zonefs_i_size_write(dst_inode, dst_off + bytes); > + dst_zi->i_wpoffset += bytes; This is wierd. iszie for dst will be dst_zi->i_wpoffset. So please do: dst_zi->i_wpoffset += bytes; zonefs_i_size_write(dst_inode, dst_zi->i_wpoffset); > + mutex_unlock(&dst_zi->i_truncate_mutex); And you are not taking care of the accounting for active zones here. If the copy made the dst zone full, it is not active anymore. You need to call zonefs_account_active(); > + /* if we still have some bytes left, do splice copy */ > + if (bytes && (bytes < len)) { > + bytes = do_splice_direct(src_file, &src_off, dst_file, > + &dst_off, len, flags); No way. > + if (bytes > 0) > + ret += bytes; > + } > +unlock_exit: > + if (ret < 0) > + zonefs_io_error(dst_inode, true); How can you be sure that you even did an IO when you get an error ? zonefs_issue_copy() may have failed on its kmalloc() and no IO was done. > + inode_unlock(src_inode); > + inode_unlock(dst_inode); > + return ret; > +} > + > +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t len, unsigned int flags) > +{ > + ssize_t ret = -EIO; This does not need to be initialized. > + > + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, > + &len, flags); These checks need to be done for the generic implementation too, no ? Why would checking this automatically trigger the offload ? What if the device does not support offloading ? > + if (ret > 0) > + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, > + len, flags); return here, then no need for the else. But see above. This seems all broken to me. > + else if (ret < 0 && ret == -EXDEV) > + ret = generic_copy_file_range(src_file, src_off, dst_file, > + dst_off, len, flags); > + return ret; > +} > + > static const struct file_operations zonefs_file_operations = { > .open = zonefs_file_open, > .release = zonefs_file_release, > @@ -1234,6 +1411,7 @@ static const struct file_operations zonefs_file_operations = { > .splice_read = generic_file_splice_read, > .splice_write = iter_file_splice_write, > .iopoll = iocb_bio_iopoll, > + .copy_file_range = zonefs_copy_file_range, > }; > > static struct kmem_cache *zonefs_inode_cachep; > @@ -1804,6 +1982,7 @@ static int zonefs_fill_super(struct super_block *sb, void *data, int silent) > atomic_set(&sbi->s_active_seq_files, 0); > sbi->s_max_active_seq_files = bdev_max_active_zones(sb->s_bdev); > > + /* set copy support by default */ What is this comment supposed to be for ? > ret = zonefs_read_super(sb); > if (ret) > return ret; -- Damien Le Moal Western Digital Research ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-24 1:32 ` Damien Le Moal 0 siblings, 0 replies; 67+ messages in thread From: Damien Le Moal @ 2022-11-24 1:32 UTC (permalink / raw) To: Nitesh Shetty, axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, linux-block, linux-fsdevel, nitheshshetty On 11/23/22 14:58, Nitesh Shetty wrote: > copy_file_range is implemented using copy offload, > copy offloading to device is always enabled. > To disable copy offloading mount with "no_copy_offload" mount option. And were is the code that handle this option ? > At present copy offload is only used, if the source and destination files > are on same block device, otherwise copy file range is completed by > generic copy file range. > > copy file range implemented as following: > - write pending writes on the src and dest files > - drop page cache for dest file if its conv zone > - copy the range using offload > - update dest file info > > For all failure cases we fallback to generic file copy range For all cases ? That would be weird. What would be the point of trying to copy again if e.g. the dest zone has gone offline or read only ? > At present this implementation does not support conv aggregation Please check this commit message overall: the grammar and punctuation could really be improved. > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> > --- > fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 179 insertions(+) > > diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c > index abc9a85106f2..15613433d4ae 100644 > --- a/fs/zonefs/super.c > +++ b/fs/zonefs/super.c > @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) > return 0; > } > > +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, > + struct inode *dst_inode, loff_t src_off, loff_t dst_off, > + size_t *len) > +{ > + loff_t size, endoff; > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + > + inode_lock(src_inode); > + size = i_size_read(src_inode); > + inode_unlock(src_inode); > + /* Don't copy beyond source file EOF. */ > + if (src_off < size) { > + if (src_off + *len > size) > + *len = (size - (src_off + *len)); > + } else > + *len = 0; Missing curly brackets for the else. > + > + mutex_lock(&dst_zi->i_truncate_mutex); > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { > + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) > + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; > + > + if (dst_off != dst_zi->i_wpoffset) > + goto err; > + } > + mutex_unlock(&dst_zi->i_truncate_mutex); > + > + endoff = dst_off + *len; > + inode_lock(dst_inode); > + if (endoff > dst_zi->i_max_size || > + inode_newsize_ok(dst_inode, endoff)) { > + inode_unlock(dst_inode); > + goto err; And here truncate mutex is not locked, but goto err will unlock it. This is broken... > + } > + inode_unlock(dst_inode); ...The locking is completely broken in this function anyway. You take the lock, look at something, then release the lock. Then what if a write or a trunctate comes in when the inode is not locked ? This is completely broken. The inode should be locked with no dio pending when this function is called. This is only to check if everything is ok. This has no business playing with the inode and truncate locks. > + > + return 0; > +err: > + mutex_unlock(&dst_zi->i_truncate_mutex); > + return -EINVAL; > +} > + > +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, > + loff_t src_off, struct zonefs_inode_info *dst_zi, > + loff_t dst_off, size_t len) > +{ > + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; > + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; > + struct range_entry *rlist = NULL; > + int ret = len; > + > + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); GFP_NOIO ? > + if (!rlist) > + return -ENOMEM; > + > + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; > + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; > + rlist[0].len = len; > + rlist[0].comp_len = 0; > + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, > + GFP_KERNEL); > + if (rlist[0].comp_len > 0) > + ret = rlist[0].comp_len; > + kfree(rlist); > + > + return ret; > +} > + > +/* Returns length of possible copy, else returns error */ > +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t *len, unsigned int flags) > +{ > + struct inode *src_inode = file_inode(src_file); > + struct inode *dst_inode = file_inode(dst_file); > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + ssize_t ret; > + > + if (src_inode->i_sb != dst_inode->i_sb) > + return -EXDEV; > + > + /* Start by sync'ing the source and destination files for conv zones */ > + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = file_write_and_wait_range(src_file, src_off, > + (src_off + *len)); > + if (ret < 0) > + goto io_error; > + } > + inode_dio_wait(src_inode); That is not a "check". So having this in a function called zonefs_copy_file_checks() is a little strange. > + > + /* Start by sync'ing the source and destination files ifor conv zones */ Same comment repeated, with typos. > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = file_write_and_wait_range(dst_file, dst_off, > + (dst_off + *len)); > + if (ret < 0) > + goto io_error; > + } > + inode_dio_wait(dst_inode); > + > + /* Drop dst file cached pages for a conv zone*/ > + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, > + dst_off >> PAGE_SHIFT, > + (dst_off + *len) >> PAGE_SHIFT); > + if (ret < 0) > + goto io_error; > + } > + > + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, > + dst_off, len); > + if (ret < 0) if (ret) > + return ret; > + > + return *len; > + > +io_error: > + zonefs_io_error(dst_inode, true); > + return ret; > +} > + > +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t len, unsigned int flags) > +{ > + struct inode *src_inode = file_inode(src_file); > + struct inode *dst_inode = file_inode(dst_file); > + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > + ssize_t ret = 0, bytes; > + > + inode_lock(src_inode); > + inode_lock(dst_inode); So you did zonefs_copy_file_checks() outside of these locks, which mean that everything about the source and destination files may have changed. This does not work. > + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); > + if (bytes < 0) > + goto unlock_exit; > + > + ret += bytes; > + > + file_update_time(dst_file); > + mutex_lock(&dst_zi->i_truncate_mutex); > + zonefs_update_stats(dst_inode, dst_off + bytes); > + zonefs_i_size_write(dst_inode, dst_off + bytes); > + dst_zi->i_wpoffset += bytes; This is wierd. iszie for dst will be dst_zi->i_wpoffset. So please do: dst_zi->i_wpoffset += bytes; zonefs_i_size_write(dst_inode, dst_zi->i_wpoffset); > + mutex_unlock(&dst_zi->i_truncate_mutex); And you are not taking care of the accounting for active zones here. If the copy made the dst zone full, it is not active anymore. You need to call zonefs_account_active(); > + /* if we still have some bytes left, do splice copy */ > + if (bytes && (bytes < len)) { > + bytes = do_splice_direct(src_file, &src_off, dst_file, > + &dst_off, len, flags); No way. > + if (bytes > 0) > + ret += bytes; > + } > +unlock_exit: > + if (ret < 0) > + zonefs_io_error(dst_inode, true); How can you be sure that you even did an IO when you get an error ? zonefs_issue_copy() may have failed on its kmalloc() and no IO was done. > + inode_unlock(src_inode); > + inode_unlock(dst_inode); > + return ret; > +} > + > +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, > + struct file *dst_file, loff_t dst_off, > + size_t len, unsigned int flags) > +{ > + ssize_t ret = -EIO; This does not need to be initialized. > + > + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, > + &len, flags); These checks need to be done for the generic implementation too, no ? Why would checking this automatically trigger the offload ? What if the device does not support offloading ? > + if (ret > 0) > + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, > + len, flags); return here, then no need for the else. But see above. This seems all broken to me. > + else if (ret < 0 && ret == -EXDEV) > + ret = generic_copy_file_range(src_file, src_off, dst_file, > + dst_off, len, flags); > + return ret; > +} > + > static const struct file_operations zonefs_file_operations = { > .open = zonefs_file_open, > .release = zonefs_file_release, > @@ -1234,6 +1411,7 @@ static const struct file_operations zonefs_file_operations = { > .splice_read = generic_file_splice_read, > .splice_write = iter_file_splice_write, > .iopoll = iocb_bio_iopoll, > + .copy_file_range = zonefs_copy_file_range, > }; > > static struct kmem_cache *zonefs_inode_cachep; > @@ -1804,6 +1982,7 @@ static int zonefs_fill_super(struct super_block *sb, void *data, int silent) > atomic_set(&sbi->s_active_seq_files, 0); > sbi->s_max_active_seq_files = bdev_max_active_zones(sb->s_bdev); > > + /* set copy support by default */ What is this comment supposed to be for ? > ret = zonefs_read_super(sb); > if (ret) > return ret; -- Damien Le Moal Western Digital Research -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 10/10] fs: add support for copy file range in zonefs 2022-11-24 1:32 ` [dm-devel] " Damien Le Moal @ 2022-11-24 1:47 ` Damien Le Moal -1 siblings, 0 replies; 67+ messages in thread From: Damien Le Moal @ 2022-11-24 1:47 UTC (permalink / raw) To: Nitesh Shetty, axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, naohiro.aota, jth, viro Cc: linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev On 11/24/22 10:32, Damien Le Moal wrote: > On 11/23/22 14:58, Nitesh Shetty wrote: >> copy_file_range is implemented using copy offload, >> copy offloading to device is always enabled. >> To disable copy offloading mount with "no_copy_offload" mount option. > > And were is the code that handle this option ? > >> At present copy offload is only used, if the source and destination files >> are on same block device, otherwise copy file range is completed by >> generic copy file range. >> >> copy file range implemented as following: >> - write pending writes on the src and dest files >> - drop page cache for dest file if its conv zone >> - copy the range using offload >> - update dest file info >> >> For all failure cases we fallback to generic file copy range > > For all cases ? That would be weird. What would be the point of trying to > copy again if e.g. the dest zone has gone offline or read only ? > >> At present this implementation does not support conv aggregation > > Please check this commit message overall: the grammar and punctuation > could really be improved. > >> >> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> >> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> >> --- >> fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 179 insertions(+) >> >> diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c >> index abc9a85106f2..15613433d4ae 100644 >> --- a/fs/zonefs/super.c >> +++ b/fs/zonefs/super.c >> @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) >> return 0; >> } >> >> +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, >> + struct inode *dst_inode, loff_t src_off, loff_t dst_off, >> + size_t *len) >> +{ >> + loff_t size, endoff; >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); >> + >> + inode_lock(src_inode); >> + size = i_size_read(src_inode); >> + inode_unlock(src_inode); >> + /* Don't copy beyond source file EOF. */ >> + if (src_off < size) { >> + if (src_off + *len > size) >> + *len = (size - (src_off + *len)); >> + } else >> + *len = 0; > > Missing curly brackets for the else. > >> + >> + mutex_lock(&dst_zi->i_truncate_mutex); >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { >> + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) >> + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; >> + >> + if (dst_off != dst_zi->i_wpoffset) >> + goto err; >> + } >> + mutex_unlock(&dst_zi->i_truncate_mutex); >> + >> + endoff = dst_off + *len; >> + inode_lock(dst_inode); >> + if (endoff > dst_zi->i_max_size || >> + inode_newsize_ok(dst_inode, endoff)) { >> + inode_unlock(dst_inode); >> + goto err; > > And here truncate mutex is not locked, but goto err will unlock it. This > is broken... > >> + } >> + inode_unlock(dst_inode); > > ...The locking is completely broken in this function anyway. You take the > lock, look at something, then release the lock. Then what if a write or a > trunctate comes in when the inode is not locked ? This is completely > broken. The inode should be locked with no dio pending when this function > is called. This is only to check if everything is ok. This has no business > playing with the inode and truncate locks. > >> + >> + return 0; >> +err: >> + mutex_unlock(&dst_zi->i_truncate_mutex); >> + return -EINVAL; >> +} >> + >> +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, >> + loff_t src_off, struct zonefs_inode_info *dst_zi, >> + loff_t dst_off, size_t len) >> +{ >> + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; >> + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; >> + struct range_entry *rlist = NULL; >> + int ret = len; >> + >> + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); > > GFP_NOIO ? > >> + if (!rlist) >> + return -ENOMEM; >> + >> + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; >> + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; >> + rlist[0].len = len; >> + rlist[0].comp_len = 0; >> + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, >> + GFP_KERNEL); >> + if (rlist[0].comp_len > 0) >> + ret = rlist[0].comp_len; >> + kfree(rlist); >> + >> + return ret; >> +} >> + >> +/* Returns length of possible copy, else returns error */ >> +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, >> + struct file *dst_file, loff_t dst_off, >> + size_t *len, unsigned int flags) >> +{ >> + struct inode *src_inode = file_inode(src_file); >> + struct inode *dst_inode = file_inode(dst_file); >> + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); >> + ssize_t ret; >> + >> + if (src_inode->i_sb != dst_inode->i_sb) >> + return -EXDEV; >> + >> + /* Start by sync'ing the source and destination files for conv zones */ >> + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { >> + ret = file_write_and_wait_range(src_file, src_off, >> + (src_off + *len)); >> + if (ret < 0) >> + goto io_error; >> + } >> + inode_dio_wait(src_inode); > > That is not a "check". So having this in a function called > zonefs_copy_file_checks() is a little strange. > >> + >> + /* Start by sync'ing the source and destination files ifor conv zones */ > > Same comment repeated, with typos. > >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { >> + ret = file_write_and_wait_range(dst_file, dst_off, >> + (dst_off + *len)); >> + if (ret < 0) >> + goto io_error; >> + } >> + inode_dio_wait(dst_inode); >> + >> + /* Drop dst file cached pages for a conv zone*/ >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { >> + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, >> + dst_off >> PAGE_SHIFT, >> + (dst_off + *len) >> PAGE_SHIFT); >> + if (ret < 0) >> + goto io_error; >> + } >> + >> + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, >> + dst_off, len); >> + if (ret < 0) > > if (ret) > >> + return ret; >> + >> + return *len; >> + >> +io_error: >> + zonefs_io_error(dst_inode, true); >> + return ret; >> +} >> + >> +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, >> + struct file *dst_file, loff_t dst_off, >> + size_t len, unsigned int flags) >> +{ >> + struct inode *src_inode = file_inode(src_file); >> + struct inode *dst_inode = file_inode(dst_file); >> + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); >> + ssize_t ret = 0, bytes; >> + >> + inode_lock(src_inode); >> + inode_lock(dst_inode); > > So you did zonefs_copy_file_checks() outside of these locks, which mean > that everything about the source and destination files may have changed. > This does not work. I forgot to mention that locking 2 inodes blindly like this can leads to deadlocks if another process tries a copy range from dst to src at the same time (lock order is reversed and so can deadlock). > >> + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); >> + if (bytes < 0) >> + goto unlock_exit; >> + >> + ret += bytes; >> + >> + file_update_time(dst_file); >> + mutex_lock(&dst_zi->i_truncate_mutex); >> + zonefs_update_stats(dst_inode, dst_off + bytes); >> + zonefs_i_size_write(dst_inode, dst_off + bytes); >> + dst_zi->i_wpoffset += bytes; > > This is wierd. iszie for dst will be dst_zi->i_wpoffset. So please do: > > dst_zi->i_wpoffset += bytes; > zonefs_i_size_write(dst_inode, dst_zi->i_wpoffset); > >> + mutex_unlock(&dst_zi->i_truncate_mutex); > > And you are not taking care of the accounting for active zones here. If > the copy made the dst zone full, it is not active anymore. You need to > call zonefs_account_active(); > >> + /* if we still have some bytes left, do splice copy */ >> + if (bytes && (bytes < len)) { >> + bytes = do_splice_direct(src_file, &src_off, dst_file, >> + &dst_off, len, flags); > > No way. > >> + if (bytes > 0) >> + ret += bytes; >> + } >> +unlock_exit: >> + if (ret < 0) >> + zonefs_io_error(dst_inode, true); > > How can you be sure that you even did an IO when you get an error ? > zonefs_issue_copy() may have failed on its kmalloc() and no IO was done. > >> + inode_unlock(src_inode); >> + inode_unlock(dst_inode); >> + return ret; >> +} >> + >> +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, >> + struct file *dst_file, loff_t dst_off, >> + size_t len, unsigned int flags) >> +{ >> + ssize_t ret = -EIO; > > This does not need to be initialized. > >> + >> + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, >> + &len, flags); > > These checks need to be done for the generic implementation too, no ? Why > would checking this automatically trigger the offload ? What if the device > does not support offloading ? > >> + if (ret > 0) >> + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, >> + len, flags); > > return here, then no need for the else. But see above. This seems all > broken to me. > >> + else if (ret < 0 && ret == -EXDEV) >> + ret = generic_copy_file_range(src_file, src_off, dst_file, >> + dst_off, len, flags); >> + return ret; >> +} >> + >> static const struct file_operations zonefs_file_operations = { >> .open = zonefs_file_open, >> .release = zonefs_file_release, >> @@ -1234,6 +1411,7 @@ static const struct file_operations zonefs_file_operations = { >> .splice_read = generic_file_splice_read, >> .splice_write = iter_file_splice_write, >> .iopoll = iocb_bio_iopoll, >> + .copy_file_range = zonefs_copy_file_range, >> }; >> >> static struct kmem_cache *zonefs_inode_cachep; >> @@ -1804,6 +1982,7 @@ static int zonefs_fill_super(struct super_block *sb, void *data, int silent) >> atomic_set(&sbi->s_active_seq_files, 0); >> sbi->s_max_active_seq_files = bdev_max_active_zones(sb->s_bdev); >> >> + /* set copy support by default */ > > What is this comment supposed to be for ? > >> ret = zonefs_read_super(sb); >> if (ret) >> return ret; > -- Damien Le Moal Western Digital Research ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-24 1:47 ` Damien Le Moal 0 siblings, 0 replies; 67+ messages in thread From: Damien Le Moal @ 2022-11-24 1:47 UTC (permalink / raw) To: Nitesh Shetty, axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, naohiro.aota, jth, viro Cc: p.raghav, joshi.k, gost.dev, anuj20.g, linux-kernel, linux-nvme, linux-block, linux-fsdevel, nitheshshetty On 11/24/22 10:32, Damien Le Moal wrote: > On 11/23/22 14:58, Nitesh Shetty wrote: >> copy_file_range is implemented using copy offload, >> copy offloading to device is always enabled. >> To disable copy offloading mount with "no_copy_offload" mount option. > > And were is the code that handle this option ? > >> At present copy offload is only used, if the source and destination files >> are on same block device, otherwise copy file range is completed by >> generic copy file range. >> >> copy file range implemented as following: >> - write pending writes on the src and dest files >> - drop page cache for dest file if its conv zone >> - copy the range using offload >> - update dest file info >> >> For all failure cases we fallback to generic file copy range > > For all cases ? That would be weird. What would be the point of trying to > copy again if e.g. the dest zone has gone offline or read only ? > >> At present this implementation does not support conv aggregation > > Please check this commit message overall: the grammar and punctuation > could really be improved. > >> >> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> >> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> >> --- >> fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 179 insertions(+) >> >> diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c >> index abc9a85106f2..15613433d4ae 100644 >> --- a/fs/zonefs/super.c >> +++ b/fs/zonefs/super.c >> @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) >> return 0; >> } >> >> +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, >> + struct inode *dst_inode, loff_t src_off, loff_t dst_off, >> + size_t *len) >> +{ >> + loff_t size, endoff; >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); >> + >> + inode_lock(src_inode); >> + size = i_size_read(src_inode); >> + inode_unlock(src_inode); >> + /* Don't copy beyond source file EOF. */ >> + if (src_off < size) { >> + if (src_off + *len > size) >> + *len = (size - (src_off + *len)); >> + } else >> + *len = 0; > > Missing curly brackets for the else. > >> + >> + mutex_lock(&dst_zi->i_truncate_mutex); >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { >> + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) >> + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; >> + >> + if (dst_off != dst_zi->i_wpoffset) >> + goto err; >> + } >> + mutex_unlock(&dst_zi->i_truncate_mutex); >> + >> + endoff = dst_off + *len; >> + inode_lock(dst_inode); >> + if (endoff > dst_zi->i_max_size || >> + inode_newsize_ok(dst_inode, endoff)) { >> + inode_unlock(dst_inode); >> + goto err; > > And here truncate mutex is not locked, but goto err will unlock it. This > is broken... > >> + } >> + inode_unlock(dst_inode); > > ...The locking is completely broken in this function anyway. You take the > lock, look at something, then release the lock. Then what if a write or a > trunctate comes in when the inode is not locked ? This is completely > broken. The inode should be locked with no dio pending when this function > is called. This is only to check if everything is ok. This has no business > playing with the inode and truncate locks. > >> + >> + return 0; >> +err: >> + mutex_unlock(&dst_zi->i_truncate_mutex); >> + return -EINVAL; >> +} >> + >> +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, >> + loff_t src_off, struct zonefs_inode_info *dst_zi, >> + loff_t dst_off, size_t len) >> +{ >> + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; >> + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; >> + struct range_entry *rlist = NULL; >> + int ret = len; >> + >> + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); > > GFP_NOIO ? > >> + if (!rlist) >> + return -ENOMEM; >> + >> + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; >> + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; >> + rlist[0].len = len; >> + rlist[0].comp_len = 0; >> + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, >> + GFP_KERNEL); >> + if (rlist[0].comp_len > 0) >> + ret = rlist[0].comp_len; >> + kfree(rlist); >> + >> + return ret; >> +} >> + >> +/* Returns length of possible copy, else returns error */ >> +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, >> + struct file *dst_file, loff_t dst_off, >> + size_t *len, unsigned int flags) >> +{ >> + struct inode *src_inode = file_inode(src_file); >> + struct inode *dst_inode = file_inode(dst_file); >> + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); >> + ssize_t ret; >> + >> + if (src_inode->i_sb != dst_inode->i_sb) >> + return -EXDEV; >> + >> + /* Start by sync'ing the source and destination files for conv zones */ >> + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { >> + ret = file_write_and_wait_range(src_file, src_off, >> + (src_off + *len)); >> + if (ret < 0) >> + goto io_error; >> + } >> + inode_dio_wait(src_inode); > > That is not a "check". So having this in a function called > zonefs_copy_file_checks() is a little strange. > >> + >> + /* Start by sync'ing the source and destination files ifor conv zones */ > > Same comment repeated, with typos. > >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { >> + ret = file_write_and_wait_range(dst_file, dst_off, >> + (dst_off + *len)); >> + if (ret < 0) >> + goto io_error; >> + } >> + inode_dio_wait(dst_inode); >> + >> + /* Drop dst file cached pages for a conv zone*/ >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { >> + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, >> + dst_off >> PAGE_SHIFT, >> + (dst_off + *len) >> PAGE_SHIFT); >> + if (ret < 0) >> + goto io_error; >> + } >> + >> + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, >> + dst_off, len); >> + if (ret < 0) > > if (ret) > >> + return ret; >> + >> + return *len; >> + >> +io_error: >> + zonefs_io_error(dst_inode, true); >> + return ret; >> +} >> + >> +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, >> + struct file *dst_file, loff_t dst_off, >> + size_t len, unsigned int flags) >> +{ >> + struct inode *src_inode = file_inode(src_file); >> + struct inode *dst_inode = file_inode(dst_file); >> + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); >> + ssize_t ret = 0, bytes; >> + >> + inode_lock(src_inode); >> + inode_lock(dst_inode); > > So you did zonefs_copy_file_checks() outside of these locks, which mean > that everything about the source and destination files may have changed. > This does not work. I forgot to mention that locking 2 inodes blindly like this can leads to deadlocks if another process tries a copy range from dst to src at the same time (lock order is reversed and so can deadlock). > >> + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); >> + if (bytes < 0) >> + goto unlock_exit; >> + >> + ret += bytes; >> + >> + file_update_time(dst_file); >> + mutex_lock(&dst_zi->i_truncate_mutex); >> + zonefs_update_stats(dst_inode, dst_off + bytes); >> + zonefs_i_size_write(dst_inode, dst_off + bytes); >> + dst_zi->i_wpoffset += bytes; > > This is wierd. iszie for dst will be dst_zi->i_wpoffset. So please do: > > dst_zi->i_wpoffset += bytes; > zonefs_i_size_write(dst_inode, dst_zi->i_wpoffset); > >> + mutex_unlock(&dst_zi->i_truncate_mutex); > > And you are not taking care of the accounting for active zones here. If > the copy made the dst zone full, it is not active anymore. You need to > call zonefs_account_active(); > >> + /* if we still have some bytes left, do splice copy */ >> + if (bytes && (bytes < len)) { >> + bytes = do_splice_direct(src_file, &src_off, dst_file, >> + &dst_off, len, flags); > > No way. > >> + if (bytes > 0) >> + ret += bytes; >> + } >> +unlock_exit: >> + if (ret < 0) >> + zonefs_io_error(dst_inode, true); > > How can you be sure that you even did an IO when you get an error ? > zonefs_issue_copy() may have failed on its kmalloc() and no IO was done. > >> + inode_unlock(src_inode); >> + inode_unlock(dst_inode); >> + return ret; >> +} >> + >> +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, >> + struct file *dst_file, loff_t dst_off, >> + size_t len, unsigned int flags) >> +{ >> + ssize_t ret = -EIO; > > This does not need to be initialized. > >> + >> + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, >> + &len, flags); > > These checks need to be done for the generic implementation too, no ? Why > would checking this automatically trigger the offload ? What if the device > does not support offloading ? > >> + if (ret > 0) >> + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, >> + len, flags); > > return here, then no need for the else. But see above. This seems all > broken to me. > >> + else if (ret < 0 && ret == -EXDEV) >> + ret = generic_copy_file_range(src_file, src_off, dst_file, >> + dst_off, len, flags); >> + return ret; >> +} >> + >> static const struct file_operations zonefs_file_operations = { >> .open = zonefs_file_open, >> .release = zonefs_file_release, >> @@ -1234,6 +1411,7 @@ static const struct file_operations zonefs_file_operations = { >> .splice_read = generic_file_splice_read, >> .splice_write = iter_file_splice_write, >> .iopoll = iocb_bio_iopoll, >> + .copy_file_range = zonefs_copy_file_range, >> }; >> >> static struct kmem_cache *zonefs_inode_cachep; >> @@ -1804,6 +1982,7 @@ static int zonefs_fill_super(struct super_block *sb, void *data, int silent) >> atomic_set(&sbi->s_active_seq_files, 0); >> sbi->s_max_active_seq_files = bdev_max_active_zones(sb->s_bdev); >> >> + /* set copy support by default */ > > What is this comment supposed to be for ? > >> ret = zonefs_read_super(sb); >> if (ret) >> return ret; > -- Damien Le Moal Western Digital Research -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 10/10] fs: add support for copy file range in zonefs 2022-11-24 1:47 ` [dm-devel] " Damien Le Moal @ 2022-11-25 4:18 ` Al Viro -1 siblings, 0 replies; 67+ messages in thread From: Al Viro @ 2022-11-25 4:18 UTC (permalink / raw) To: Damien Le Moal Cc: Nitesh Shetty, axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, naohiro.aota, jth, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev On Thu, Nov 24, 2022 at 10:47:55AM +0900, Damien Le Moal wrote: > >> + inode_lock(src_inode); > >> + inode_lock(dst_inode); > > > > So you did zonefs_copy_file_checks() outside of these locks, which mean > > that everything about the source and destination files may have changed. > > This does not work. > > I forgot to mention that locking 2 inodes blindly like this can leads to > deadlocks if another process tries a copy range from dst to src at the > same time (lock order is reversed and so can deadlock). Not to mention the deadlocks with existing places where fs/namei.c locks two inodes... ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-25 4:18 ` Al Viro 0 siblings, 0 replies; 67+ messages in thread From: Al Viro @ 2022-11-25 4:18 UTC (permalink / raw) To: Damien Le Moal Cc: axboe, naohiro.aota, gost.dev, kch, sagi, joshi.k, linux-kernel, anuj20.g, snitzer, james.smart, linux-nvme, hch, linux-block, linux-fsdevel, dm-devel, nitheshshetty, kbusch, jth, Nitesh Shetty, agk, p.raghav On Thu, Nov 24, 2022 at 10:47:55AM +0900, Damien Le Moal wrote: > >> + inode_lock(src_inode); > >> + inode_lock(dst_inode); > > > > So you did zonefs_copy_file_checks() outside of these locks, which mean > > that everything about the source and destination files may have changed. > > This does not work. > > I forgot to mention that locking 2 inodes blindly like this can leads to > deadlocks if another process tries a copy range from dst to src at the > same time (lock order is reversed and so can deadlock). Not to mention the deadlocks with existing places where fs/namei.c locks two inodes... -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 10/10] fs: add support for copy file range in zonefs 2022-11-24 1:47 ` [dm-devel] " Damien Le Moal @ 2022-11-29 12:22 ` Nitesh Shetty -1 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-29 12:22 UTC (permalink / raw) To: Damien Le Moal Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev [-- Attachment #1: Type: text/plain, Size: 11029 bytes --] On Thu, Nov 24, 2022 at 10:47:55AM +0900, Damien Le Moal wrote: > On 11/24/22 10:32, Damien Le Moal wrote: > > On 11/23/22 14:58, Nitesh Shetty wrote: > >> copy_file_range is implemented using copy offload, > >> copy offloading to device is always enabled. > >> To disable copy offloading mount with "no_copy_offload" mount option. > > > > And were is the code that handle this option ? > > > >> At present copy offload is only used, if the source and destination files > >> are on same block device, otherwise copy file range is completed by > >> generic copy file range. > >> > >> copy file range implemented as following: > >> - write pending writes on the src and dest files > >> - drop page cache for dest file if its conv zone > >> - copy the range using offload > >> - update dest file info > >> > >> For all failure cases we fallback to generic file copy range > > > > For all cases ? That would be weird. What would be the point of trying to > > copy again if e.g. the dest zone has gone offline or read only ? > > > >> At present this implementation does not support conv aggregation > > > > Please check this commit message overall: the grammar and punctuation > > could really be improved. > > > >> > >> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > >> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> > >> --- > >> fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ > >> 1 file changed, 179 insertions(+) > >> > >> diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c > >> index abc9a85106f2..15613433d4ae 100644 > >> --- a/fs/zonefs/super.c > >> +++ b/fs/zonefs/super.c > >> @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) > >> return 0; > >> } > >> > >> +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, > >> + struct inode *dst_inode, loff_t src_off, loff_t dst_off, > >> + size_t *len) > >> +{ > >> + loff_t size, endoff; > >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > >> + > >> + inode_lock(src_inode); > >> + size = i_size_read(src_inode); > >> + inode_unlock(src_inode); > >> + /* Don't copy beyond source file EOF. */ > >> + if (src_off < size) { > >> + if (src_off + *len > size) > >> + *len = (size - (src_off + *len)); > >> + } else > >> + *len = 0; > > > > Missing curly brackets for the else. > > > >> + > >> + mutex_lock(&dst_zi->i_truncate_mutex); > >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { > >> + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) > >> + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; > >> + > >> + if (dst_off != dst_zi->i_wpoffset) > >> + goto err; > >> + } > >> + mutex_unlock(&dst_zi->i_truncate_mutex); > >> + > >> + endoff = dst_off + *len; > >> + inode_lock(dst_inode); > >> + if (endoff > dst_zi->i_max_size || > >> + inode_newsize_ok(dst_inode, endoff)) { > >> + inode_unlock(dst_inode); > >> + goto err; > > > > And here truncate mutex is not locked, but goto err will unlock it. This > > is broken... > > > >> + } > >> + inode_unlock(dst_inode); > > > > ...The locking is completely broken in this function anyway. You take the > > lock, look at something, then release the lock. Then what if a write or a > > trunctate comes in when the inode is not locked ? This is completely > > broken. The inode should be locked with no dio pending when this function > > is called. This is only to check if everything is ok. This has no business > > playing with the inode and truncate locks. > > > >> + > >> + return 0; > >> +err: > >> + mutex_unlock(&dst_zi->i_truncate_mutex); > >> + return -EINVAL; > >> +} > >> + > >> +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, > >> + loff_t src_off, struct zonefs_inode_info *dst_zi, > >> + loff_t dst_off, size_t len) > >> +{ > >> + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; > >> + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; > >> + struct range_entry *rlist = NULL; > >> + int ret = len; > >> + > >> + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); > > > > GFP_NOIO ? > > > >> + if (!rlist) > >> + return -ENOMEM; > >> + > >> + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; > >> + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; > >> + rlist[0].len = len; > >> + rlist[0].comp_len = 0; > >> + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, > >> + GFP_KERNEL); > >> + if (rlist[0].comp_len > 0) > >> + ret = rlist[0].comp_len; > >> + kfree(rlist); > >> + > >> + return ret; > >> +} > >> + > >> +/* Returns length of possible copy, else returns error */ > >> +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, > >> + struct file *dst_file, loff_t dst_off, > >> + size_t *len, unsigned int flags) > >> +{ > >> + struct inode *src_inode = file_inode(src_file); > >> + struct inode *dst_inode = file_inode(dst_file); > >> + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > >> + ssize_t ret; > >> + > >> + if (src_inode->i_sb != dst_inode->i_sb) > >> + return -EXDEV; > >> + > >> + /* Start by sync'ing the source and destination files for conv zones */ > >> + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > >> + ret = file_write_and_wait_range(src_file, src_off, > >> + (src_off + *len)); > >> + if (ret < 0) > >> + goto io_error; > >> + } > >> + inode_dio_wait(src_inode); > > > > That is not a "check". So having this in a function called > > zonefs_copy_file_checks() is a little strange. > > > >> + > >> + /* Start by sync'ing the source and destination files ifor conv zones */ > > > > Same comment repeated, with typos. > > > >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > >> + ret = file_write_and_wait_range(dst_file, dst_off, > >> + (dst_off + *len)); > >> + if (ret < 0) > >> + goto io_error; > >> + } > >> + inode_dio_wait(dst_inode); > >> + > >> + /* Drop dst file cached pages for a conv zone*/ > >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > >> + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, > >> + dst_off >> PAGE_SHIFT, > >> + (dst_off + *len) >> PAGE_SHIFT); > >> + if (ret < 0) > >> + goto io_error; > >> + } > >> + > >> + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, > >> + dst_off, len); > >> + if (ret < 0) > > > > if (ret) > > > >> + return ret; > >> + > >> + return *len; > >> + > >> +io_error: > >> + zonefs_io_error(dst_inode, true); > >> + return ret; > >> +} > >> + > >> +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, > >> + struct file *dst_file, loff_t dst_off, > >> + size_t len, unsigned int flags) > >> +{ > >> + struct inode *src_inode = file_inode(src_file); > >> + struct inode *dst_inode = file_inode(dst_file); > >> + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > >> + ssize_t ret = 0, bytes; > >> + > >> + inode_lock(src_inode); > >> + inode_lock(dst_inode); > > > > So you did zonefs_copy_file_checks() outside of these locks, which mean > > that everything about the source and destination files may have changed. > > This does not work. > > I forgot to mention that locking 2 inodes blindly like this can leads to > deadlocks if another process tries a copy range from dst to src at the > same time (lock order is reversed and so can deadlock). > > > > >> + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); > >> + if (bytes < 0) > >> + goto unlock_exit; > >> + > >> + ret += bytes; > >> + > >> + file_update_time(dst_file); > >> + mutex_lock(&dst_zi->i_truncate_mutex); > >> + zonefs_update_stats(dst_inode, dst_off + bytes); > >> + zonefs_i_size_write(dst_inode, dst_off + bytes); > >> + dst_zi->i_wpoffset += bytes; > > > > This is wierd. iszie for dst will be dst_zi->i_wpoffset. So please do: > > > > dst_zi->i_wpoffset += bytes; > > zonefs_i_size_write(dst_inode, dst_zi->i_wpoffset); > > > >> + mutex_unlock(&dst_zi->i_truncate_mutex); > > > > And you are not taking care of the accounting for active zones here. If > > the copy made the dst zone full, it is not active anymore. You need to > > call zonefs_account_active(); > > > >> + /* if we still have some bytes left, do splice copy */ > >> + if (bytes && (bytes < len)) { > >> + bytes = do_splice_direct(src_file, &src_off, dst_file, > >> + &dst_off, len, flags); > > > > No way. > > > >> + if (bytes > 0) > >> + ret += bytes; > >> + } > >> +unlock_exit: > >> + if (ret < 0) > >> + zonefs_io_error(dst_inode, true); > > > > How can you be sure that you even did an IO when you get an error ? > > zonefs_issue_copy() may have failed on its kmalloc() and no IO was done. > > > >> + inode_unlock(src_inode); > >> + inode_unlock(dst_inode); > >> + return ret; > >> +} > >> + > >> +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, > >> + struct file *dst_file, loff_t dst_off, > >> + size_t len, unsigned int flags) > >> +{ > >> + ssize_t ret = -EIO; > > > > This does not need to be initialized. > > > >> + > >> + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, > >> + &len, flags); > > > > These checks need to be done for the generic implementation too, no ? Why > > would checking this automatically trigger the offload ? What if the device > > does not support offloading ? > > > >> + if (ret > 0) > >> + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, > >> + len, flags); > > > > return here, then no need for the else. But see above. This seems all > > broken to me. > > > >> + else if (ret < 0 && ret == -EXDEV) > >> + ret = generic_copy_file_range(src_file, src_off, dst_file, > >> + dst_off, len, flags); > >> + return ret; > >> +} > >> + > >> static const struct file_operations zonefs_file_operations = { > >> .open = zonefs_file_open, > >> .release = zonefs_file_release, > >> @@ -1234,6 +1411,7 @@ static const struct file_operations zonefs_file_operations = { > >> .splice_read = generic_file_splice_read, > >> .splice_write = iter_file_splice_write, > >> .iopoll = iocb_bio_iopoll, > >> + .copy_file_range = zonefs_copy_file_range, > >> }; > >> > >> static struct kmem_cache *zonefs_inode_cachep; > >> @@ -1804,6 +1982,7 @@ static int zonefs_fill_super(struct super_block *sb, void *data, int silent) > >> atomic_set(&sbi->s_active_seq_files, 0); > >> sbi->s_max_active_seq_files = bdev_max_active_zones(sb->s_bdev); > >> > >> + /* set copy support by default */ > > > > What is this comment supposed to be for ? > > > >> ret = zonefs_read_super(sb); > >> if (ret) > >> return ret; > > > > -- > Damien Le Moal > Western Digital Research > > Acked. I do see a gap in current zonefs cfr implementation. I will drop this implementation for next version. Once we finalize on block copy offload implementation, will re-pick this and send with above reviews fixed. Thank you, Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-29 12:22 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-29 12:22 UTC (permalink / raw) To: Damien Le Moal Cc: axboe, naohiro.aota, kch, sagi, joshi.k, gost.dev, anuj20.g, snitzer, james.smart, linux-nvme, linux-kernel, linux-block, linux-fsdevel, dm-devel, viro, nitheshshetty, kbusch, jth, hch, agk, p.raghav [-- Attachment #1: Type: text/plain, Size: 11029 bytes --] On Thu, Nov 24, 2022 at 10:47:55AM +0900, Damien Le Moal wrote: > On 11/24/22 10:32, Damien Le Moal wrote: > > On 11/23/22 14:58, Nitesh Shetty wrote: > >> copy_file_range is implemented using copy offload, > >> copy offloading to device is always enabled. > >> To disable copy offloading mount with "no_copy_offload" mount option. > > > > And were is the code that handle this option ? > > > >> At present copy offload is only used, if the source and destination files > >> are on same block device, otherwise copy file range is completed by > >> generic copy file range. > >> > >> copy file range implemented as following: > >> - write pending writes on the src and dest files > >> - drop page cache for dest file if its conv zone > >> - copy the range using offload > >> - update dest file info > >> > >> For all failure cases we fallback to generic file copy range > > > > For all cases ? That would be weird. What would be the point of trying to > > copy again if e.g. the dest zone has gone offline or read only ? > > > >> At present this implementation does not support conv aggregation > > > > Please check this commit message overall: the grammar and punctuation > > could really be improved. > > > >> > >> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> > >> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> > >> --- > >> fs/zonefs/super.c | 179 ++++++++++++++++++++++++++++++++++++++++++++++ > >> 1 file changed, 179 insertions(+) > >> > >> diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c > >> index abc9a85106f2..15613433d4ae 100644 > >> --- a/fs/zonefs/super.c > >> +++ b/fs/zonefs/super.c > >> @@ -1223,6 +1223,183 @@ static int zonefs_file_release(struct inode *inode, struct file *file) > >> return 0; > >> } > >> > >> +static int zonefs_is_file_copy_offset_ok(struct inode *src_inode, > >> + struct inode *dst_inode, loff_t src_off, loff_t dst_off, > >> + size_t *len) > >> +{ > >> + loff_t size, endoff; > >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > >> + > >> + inode_lock(src_inode); > >> + size = i_size_read(src_inode); > >> + inode_unlock(src_inode); > >> + /* Don't copy beyond source file EOF. */ > >> + if (src_off < size) { > >> + if (src_off + *len > size) > >> + *len = (size - (src_off + *len)); > >> + } else > >> + *len = 0; > > > > Missing curly brackets for the else. > > > >> + > >> + mutex_lock(&dst_zi->i_truncate_mutex); > >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_SEQ) { > >> + if (*len > dst_zi->i_max_size - dst_zi->i_wpoffset) > >> + *len -= dst_zi->i_max_size - dst_zi->i_wpoffset; > >> + > >> + if (dst_off != dst_zi->i_wpoffset) > >> + goto err; > >> + } > >> + mutex_unlock(&dst_zi->i_truncate_mutex); > >> + > >> + endoff = dst_off + *len; > >> + inode_lock(dst_inode); > >> + if (endoff > dst_zi->i_max_size || > >> + inode_newsize_ok(dst_inode, endoff)) { > >> + inode_unlock(dst_inode); > >> + goto err; > > > > And here truncate mutex is not locked, but goto err will unlock it. This > > is broken... > > > >> + } > >> + inode_unlock(dst_inode); > > > > ...The locking is completely broken in this function anyway. You take the > > lock, look at something, then release the lock. Then what if a write or a > > trunctate comes in when the inode is not locked ? This is completely > > broken. The inode should be locked with no dio pending when this function > > is called. This is only to check if everything is ok. This has no business > > playing with the inode and truncate locks. > > > >> + > >> + return 0; > >> +err: > >> + mutex_unlock(&dst_zi->i_truncate_mutex); > >> + return -EINVAL; > >> +} > >> + > >> +static ssize_t zonefs_issue_copy(struct zonefs_inode_info *src_zi, > >> + loff_t src_off, struct zonefs_inode_info *dst_zi, > >> + loff_t dst_off, size_t len) > >> +{ > >> + struct block_device *src_bdev = src_zi->i_vnode.i_sb->s_bdev; > >> + struct block_device *dst_bdev = dst_zi->i_vnode.i_sb->s_bdev; > >> + struct range_entry *rlist = NULL; > >> + int ret = len; > >> + > >> + rlist = kmalloc(sizeof(*rlist), GFP_KERNEL); > > > > GFP_NOIO ? > > > >> + if (!rlist) > >> + return -ENOMEM; > >> + > >> + rlist[0].dst = (dst_zi->i_zsector << SECTOR_SHIFT) + dst_off; > >> + rlist[0].src = (src_zi->i_zsector << SECTOR_SHIFT) + src_off; > >> + rlist[0].len = len; > >> + rlist[0].comp_len = 0; > >> + ret = blkdev_issue_copy(src_bdev, dst_bdev, rlist, 1, NULL, NULL, > >> + GFP_KERNEL); > >> + if (rlist[0].comp_len > 0) > >> + ret = rlist[0].comp_len; > >> + kfree(rlist); > >> + > >> + return ret; > >> +} > >> + > >> +/* Returns length of possible copy, else returns error */ > >> +static ssize_t zonefs_copy_file_checks(struct file *src_file, loff_t src_off, > >> + struct file *dst_file, loff_t dst_off, > >> + size_t *len, unsigned int flags) > >> +{ > >> + struct inode *src_inode = file_inode(src_file); > >> + struct inode *dst_inode = file_inode(dst_file); > >> + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > >> + ssize_t ret; > >> + > >> + if (src_inode->i_sb != dst_inode->i_sb) > >> + return -EXDEV; > >> + > >> + /* Start by sync'ing the source and destination files for conv zones */ > >> + if (src_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > >> + ret = file_write_and_wait_range(src_file, src_off, > >> + (src_off + *len)); > >> + if (ret < 0) > >> + goto io_error; > >> + } > >> + inode_dio_wait(src_inode); > > > > That is not a "check". So having this in a function called > > zonefs_copy_file_checks() is a little strange. > > > >> + > >> + /* Start by sync'ing the source and destination files ifor conv zones */ > > > > Same comment repeated, with typos. > > > >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > >> + ret = file_write_and_wait_range(dst_file, dst_off, > >> + (dst_off + *len)); > >> + if (ret < 0) > >> + goto io_error; > >> + } > >> + inode_dio_wait(dst_inode); > >> + > >> + /* Drop dst file cached pages for a conv zone*/ > >> + if (dst_zi->i_ztype == ZONEFS_ZTYPE_CNV) { > >> + ret = invalidate_inode_pages2_range(dst_inode->i_mapping, > >> + dst_off >> PAGE_SHIFT, > >> + (dst_off + *len) >> PAGE_SHIFT); > >> + if (ret < 0) > >> + goto io_error; > >> + } > >> + > >> + ret = zonefs_is_file_copy_offset_ok(src_inode, dst_inode, src_off, > >> + dst_off, len); > >> + if (ret < 0) > > > > if (ret) > > > >> + return ret; > >> + > >> + return *len; > >> + > >> +io_error: > >> + zonefs_io_error(dst_inode, true); > >> + return ret; > >> +} > >> + > >> +static ssize_t zonefs_copy_file(struct file *src_file, loff_t src_off, > >> + struct file *dst_file, loff_t dst_off, > >> + size_t len, unsigned int flags) > >> +{ > >> + struct inode *src_inode = file_inode(src_file); > >> + struct inode *dst_inode = file_inode(dst_file); > >> + struct zonefs_inode_info *src_zi = ZONEFS_I(src_inode); > >> + struct zonefs_inode_info *dst_zi = ZONEFS_I(dst_inode); > >> + ssize_t ret = 0, bytes; > >> + > >> + inode_lock(src_inode); > >> + inode_lock(dst_inode); > > > > So you did zonefs_copy_file_checks() outside of these locks, which mean > > that everything about the source and destination files may have changed. > > This does not work. > > I forgot to mention that locking 2 inodes blindly like this can leads to > deadlocks if another process tries a copy range from dst to src at the > same time (lock order is reversed and so can deadlock). > > > > >> + bytes = zonefs_issue_copy(src_zi, src_off, dst_zi, dst_off, len); > >> + if (bytes < 0) > >> + goto unlock_exit; > >> + > >> + ret += bytes; > >> + > >> + file_update_time(dst_file); > >> + mutex_lock(&dst_zi->i_truncate_mutex); > >> + zonefs_update_stats(dst_inode, dst_off + bytes); > >> + zonefs_i_size_write(dst_inode, dst_off + bytes); > >> + dst_zi->i_wpoffset += bytes; > > > > This is wierd. iszie for dst will be dst_zi->i_wpoffset. So please do: > > > > dst_zi->i_wpoffset += bytes; > > zonefs_i_size_write(dst_inode, dst_zi->i_wpoffset); > > > >> + mutex_unlock(&dst_zi->i_truncate_mutex); > > > > And you are not taking care of the accounting for active zones here. If > > the copy made the dst zone full, it is not active anymore. You need to > > call zonefs_account_active(); > > > >> + /* if we still have some bytes left, do splice copy */ > >> + if (bytes && (bytes < len)) { > >> + bytes = do_splice_direct(src_file, &src_off, dst_file, > >> + &dst_off, len, flags); > > > > No way. > > > >> + if (bytes > 0) > >> + ret += bytes; > >> + } > >> +unlock_exit: > >> + if (ret < 0) > >> + zonefs_io_error(dst_inode, true); > > > > How can you be sure that you even did an IO when you get an error ? > > zonefs_issue_copy() may have failed on its kmalloc() and no IO was done. > > > >> + inode_unlock(src_inode); > >> + inode_unlock(dst_inode); > >> + return ret; > >> +} > >> + > >> +static ssize_t zonefs_copy_file_range(struct file *src_file, loff_t src_off, > >> + struct file *dst_file, loff_t dst_off, > >> + size_t len, unsigned int flags) > >> +{ > >> + ssize_t ret = -EIO; > > > > This does not need to be initialized. > > > >> + > >> + ret = zonefs_copy_file_checks(src_file, src_off, dst_file, dst_off, > >> + &len, flags); > > > > These checks need to be done for the generic implementation too, no ? Why > > would checking this automatically trigger the offload ? What if the device > > does not support offloading ? > > > >> + if (ret > 0) > >> + ret = zonefs_copy_file(src_file, src_off, dst_file, dst_off, > >> + len, flags); > > > > return here, then no need for the else. But see above. This seems all > > broken to me. > > > >> + else if (ret < 0 && ret == -EXDEV) > >> + ret = generic_copy_file_range(src_file, src_off, dst_file, > >> + dst_off, len, flags); > >> + return ret; > >> +} > >> + > >> static const struct file_operations zonefs_file_operations = { > >> .open = zonefs_file_open, > >> .release = zonefs_file_release, > >> @@ -1234,6 +1411,7 @@ static const struct file_operations zonefs_file_operations = { > >> .splice_read = generic_file_splice_read, > >> .splice_write = iter_file_splice_write, > >> .iopoll = iocb_bio_iopoll, > >> + .copy_file_range = zonefs_copy_file_range, > >> }; > >> > >> static struct kmem_cache *zonefs_inode_cachep; > >> @@ -1804,6 +1982,7 @@ static int zonefs_fill_super(struct super_block *sb, void *data, int silent) > >> atomic_set(&sbi->s_active_seq_files, 0); > >> sbi->s_max_active_seq_files = bdev_max_active_zones(sb->s_bdev); > >> > >> + /* set copy support by default */ > > > > What is this comment supposed to be for ? > > > >> ret = zonefs_read_super(sb); > >> if (ret) > >> return ret; > > > > -- > Damien Le Moal > Western Digital Research > > Acked. I do see a gap in current zonefs cfr implementation. I will drop this implementation for next version. Once we finalize on block copy offload implementation, will re-pick this and send with above reviews fixed. Thank you, Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 10/10] fs: add support for copy file range in zonefs 2022-11-29 12:22 ` [dm-devel] " Nitesh Shetty @ 2022-11-29 23:45 ` Damien Le Moal -1 siblings, 0 replies; 67+ messages in thread From: Damien Le Moal @ 2022-11-29 23:45 UTC (permalink / raw) To: Nitesh Shetty Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev On 11/29/22 21:22, Nitesh Shetty wrote: > Acked. I do see a gap in current zonefs cfr implementation. I will drop this cfr ? > implementation for next version. Once we finalize on block copy offload > implementation, will re-pick this and send with above reviews fixed. > > Thank you, > Nitesh Please trim your replies. -- Damien Le Moal Western Digital Research ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-29 23:45 ` Damien Le Moal 0 siblings, 0 replies; 67+ messages in thread From: Damien Le Moal @ 2022-11-29 23:45 UTC (permalink / raw) To: Nitesh Shetty Cc: axboe, naohiro.aota, kch, sagi, joshi.k, gost.dev, anuj20.g, snitzer, james.smart, linux-nvme, linux-kernel, linux-block, linux-fsdevel, dm-devel, viro, nitheshshetty, kbusch, jth, hch, agk, p.raghav On 11/29/22 21:22, Nitesh Shetty wrote: > Acked. I do see a gap in current zonefs cfr implementation. I will drop this cfr ? > implementation for next version. Once we finalize on block copy offload > implementation, will re-pick this and send with above reviews fixed. > > Thank you, > Nitesh Please trim your replies. -- Damien Le Moal Western Digital Research -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 10/10] fs: add support for copy file range in zonefs 2022-11-29 23:45 ` [dm-devel] " Damien Le Moal @ 2022-11-30 4:17 ` Nitesh Shetty -1 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-30 4:17 UTC (permalink / raw) To: Damien Le Moal Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev [-- Attachment #1: Type: text/plain, Size: 550 bytes --] On Wed, Nov 30, 2022 at 08:45:55AM +0900, Damien Le Moal wrote: > On 11/29/22 21:22, Nitesh Shetty wrote: > > Acked. I do see a gap in current zonefs cfr implementation. I will drop this > > cfr ? > yes, will drop zonefs cfr for next version. > > implementation for next version. Once we finalize on block copy offload > > implementation, will re-pick this and send with above reviews fixed. > > > > Thank you, > > Nitesh > > Please trim your replies. > Noted > > -- > Damien Le Moal > Western Digital Research > > Thanks, Nitesh Shetty [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-30 4:17 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-30 4:17 UTC (permalink / raw) To: Damien Le Moal Cc: axboe, naohiro.aota, kch, sagi, joshi.k, gost.dev, anuj20.g, snitzer, james.smart, linux-nvme, linux-kernel, linux-block, linux-fsdevel, dm-devel, viro, nitheshshetty, kbusch, jth, hch, agk, p.raghav [-- Attachment #1: Type: text/plain, Size: 550 bytes --] On Wed, Nov 30, 2022 at 08:45:55AM +0900, Damien Le Moal wrote: > On 11/29/22 21:22, Nitesh Shetty wrote: > > Acked. I do see a gap in current zonefs cfr implementation. I will drop this > > cfr ? > yes, will drop zonefs cfr for next version. > > implementation for next version. Once we finalize on block copy offload > > implementation, will re-pick this and send with above reviews fixed. > > > > Thank you, > > Nitesh > > Please trim your replies. > Noted > > -- > Damien Le Moal > Western Digital Research > > Thanks, Nitesh Shetty [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 10/10] fs: add support for copy file range in zonefs 2022-11-30 4:17 ` [dm-devel] " Nitesh Shetty @ 2022-11-30 9:55 ` Damien Le Moal -1 siblings, 0 replies; 67+ messages in thread From: Damien Le Moal @ 2022-11-30 9:55 UTC (permalink / raw) To: Nitesh Shetty Cc: axboe, agk, snitzer, dm-devel, kbusch, hch, sagi, james.smart, kch, naohiro.aota, jth, viro, linux-block, linux-kernel, linux-nvme, linux-fsdevel, anuj20.g, joshi.k, p.raghav, nitheshshetty, gost.dev On 11/30/22 13:17, Nitesh Shetty wrote: > On Wed, Nov 30, 2022 at 08:45:55AM +0900, Damien Le Moal wrote: >> On 11/29/22 21:22, Nitesh Shetty wrote: >>> Acked. I do see a gap in current zonefs cfr implementation. I will drop this >> >> cfr ? >> > > yes, will drop zonefs cfr for next version. I meant: I do not understand "cfr". I now realize that it probably means copy-file-range ? Please be clear and do not use abbreviations. -- Damien Le Moal Western Digital Research ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 10/10] fs: add support for copy file range in zonefs @ 2022-11-30 9:55 ` Damien Le Moal 0 siblings, 0 replies; 67+ messages in thread From: Damien Le Moal @ 2022-11-30 9:55 UTC (permalink / raw) To: Nitesh Shetty Cc: axboe, naohiro.aota, kch, sagi, joshi.k, gost.dev, anuj20.g, snitzer, james.smart, linux-nvme, linux-kernel, linux-block, linux-fsdevel, dm-devel, viro, nitheshshetty, kbusch, jth, hch, agk, p.raghav On 11/30/22 13:17, Nitesh Shetty wrote: > On Wed, Nov 30, 2022 at 08:45:55AM +0900, Damien Le Moal wrote: >> On 11/29/22 21:22, Nitesh Shetty wrote: >>> Acked. I do see a gap in current zonefs cfr implementation. I will drop this >> >> cfr ? >> > > yes, will drop zonefs cfr for next version. I meant: I do not understand "cfr". I now realize that it probably means copy-file-range ? Please be clear and do not use abbreviations. -- Damien Le Moal Western Digital Research -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 00/10] Implement copy offload support 2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty @ 2022-11-23 22:56 ` Chaitanya Kulkarni -1 siblings, 0 replies; 67+ messages in thread From: Chaitanya Kulkarni @ 2022-11-23 22:56 UTC (permalink / raw) To: Nitesh Shetty Cc: linux-block, agk, linux-kernel, linux-nvme, linux-fsdevel, axboe, viro, sagi, anuj20.g, joshi.k, p.raghav, naohiro.aota, damien.lemoal, Chaitanya Kulkarni, snitzer, kbusch, jth, nitheshshetty, james.smart, gost.dev, dm-devel, hch, shinichiro.kawasaki (+ Shinichiro) On 11/22/22 21:58, Nitesh Shetty wrote: > The patch series covers the points discussed in November 2021 virtual > call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. > We have covered the initial agreed requirements in this patchset and > further additional features suggested by community. > Patchset borrows Mikulas's token based approach for 2 bdev > implementation. > > This is on top of our previous patchset v4[1]. Now that series is converging, since patch-series touches drivers and key components in the block layer you need accompany the patch-series with the blktests to cover the corner cases in the drivers which supports this operations, as I mentioned this in the call last year.... If you need any help with that feel free to send an email to linux-block and CC me or Shinichiro (added in CC )... -ck ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 00/10] Implement copy offload support @ 2022-11-23 22:56 ` Chaitanya Kulkarni 0 siblings, 0 replies; 67+ messages in thread From: Chaitanya Kulkarni @ 2022-11-23 22:56 UTC (permalink / raw) To: Nitesh Shetty Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, nitheshshetty, james.smart, shinichiro.kawasaki, p.raghav, Chaitanya Kulkarni, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, damien.lemoal (+ Shinichiro) On 11/22/22 21:58, Nitesh Shetty wrote: > The patch series covers the points discussed in November 2021 virtual > call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. > We have covered the initial agreed requirements in this patchset and > further additional features suggested by community. > Patchset borrows Mikulas's token based approach for 2 bdev > implementation. > > This is on top of our previous patchset v4[1]. Now that series is converging, since patch-series touches drivers and key components in the block layer you need accompany the patch-series with the blktests to cover the corner cases in the drivers which supports this operations, as I mentioned this in the call last year.... If you need any help with that feel free to send an email to linux-block and CC me or Shinichiro (added in CC )... -ck -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 00/10] Implement copy offload support 2022-11-23 22:56 ` [dm-devel] " Chaitanya Kulkarni @ 2022-11-29 12:16 ` Nitesh Shetty -1 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-29 12:16 UTC (permalink / raw) To: Chaitanya Kulkarni Cc: linux-block, agk, linux-kernel, linux-nvme, linux-fsdevel, axboe, viro, sagi, anuj20.g, joshi.k, p.raghav, naohiro.aota, damien.lemoal, snitzer, kbusch, jth, nitheshshetty, james.smart, gost.dev, dm-devel, hch, shinichiro.kawasaki [-- Attachment #1: Type: text/plain, Size: 1176 bytes --] On Wed, Nov 23, 2022 at 10:56:23PM +0000, Chaitanya Kulkarni wrote: > (+ Shinichiro) > > On 11/22/22 21:58, Nitesh Shetty wrote: > > The patch series covers the points discussed in November 2021 virtual > > call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. > > We have covered the initial agreed requirements in this patchset and > > further additional features suggested by community. > > Patchset borrows Mikulas's token based approach for 2 bdev > > implementation. > > > > This is on top of our previous patchset v4[1]. > > Now that series is converging, since patch-series touches > drivers and key components in the block layer you need accompany > the patch-series with the blktests to cover the corner cases in the > drivers which supports this operations, as I mentioned this in the > call last year.... > > If you need any help with that feel free to send an email to linux-block > and CC me or Shinichiro (added in CC )... > > -ck > Yes any help would be appreciated. I am not familiar with blktest development/testing cycle. Do we need add blktests along with patch series or do we need to add after patch series gets merged(to be merged)? Thanks Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 00/10] Implement copy offload support @ 2022-11-29 12:16 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-29 12:16 UTC (permalink / raw) To: Chaitanya Kulkarni Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, nitheshshetty, james.smart, shinichiro.kawasaki, p.raghav, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, damien.lemoal [-- Attachment #1: Type: text/plain, Size: 1176 bytes --] On Wed, Nov 23, 2022 at 10:56:23PM +0000, Chaitanya Kulkarni wrote: > (+ Shinichiro) > > On 11/22/22 21:58, Nitesh Shetty wrote: > > The patch series covers the points discussed in November 2021 virtual > > call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. > > We have covered the initial agreed requirements in this patchset and > > further additional features suggested by community. > > Patchset borrows Mikulas's token based approach for 2 bdev > > implementation. > > > > This is on top of our previous patchset v4[1]. > > Now that series is converging, since patch-series touches > drivers and key components in the block layer you need accompany > the patch-series with the blktests to cover the corner cases in the > drivers which supports this operations, as I mentioned this in the > call last year.... > > If you need any help with that feel free to send an email to linux-block > and CC me or Shinichiro (added in CC )... > > -ck > Yes any help would be appreciated. I am not familiar with blktest development/testing cycle. Do we need add blktests along with patch series or do we need to add after patch series gets merged(to be merged)? Thanks Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 00/10] Implement copy offload support 2022-11-29 12:16 ` [dm-devel] " Nitesh Shetty @ 2022-11-30 0:05 ` Chaitanya Kulkarni -1 siblings, 0 replies; 67+ messages in thread From: Chaitanya Kulkarni @ 2022-11-30 0:05 UTC (permalink / raw) To: Nitesh Shetty Cc: linux-block, agk, linux-kernel, linux-nvme, linux-fsdevel, axboe, viro, sagi, anuj20.g, joshi.k, p.raghav, naohiro.aota, damien.lemoal, snitzer, kbusch, jth, nitheshshetty, james.smart, gost.dev, dm-devel, hch, shinichiro.kawasaki On 11/29/22 04:16, Nitesh Shetty wrote: > On Wed, Nov 23, 2022 at 10:56:23PM +0000, Chaitanya Kulkarni wrote: >> (+ Shinichiro) >> >> On 11/22/22 21:58, Nitesh Shetty wrote: >>> The patch series covers the points discussed in November 2021 virtual >>> call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. >>> We have covered the initial agreed requirements in this patchset and >>> further additional features suggested by community. >>> Patchset borrows Mikulas's token based approach for 2 bdev >>> implementation. >>> >>> This is on top of our previous patchset v4[1]. >> >> Now that series is converging, since patch-series touches >> drivers and key components in the block layer you need accompany >> the patch-series with the blktests to cover the corner cases in the >> drivers which supports this operations, as I mentioned this in the >> call last year.... >> >> If you need any help with that feel free to send an email to linux-block >> and CC me or Shinichiro (added in CC )... >> >> -ck >> > > Yes any help would be appreciated. I am not familiar with blktest > development/testing cycle. Do we need add blktests along with patch > series or do we need to add after patch series gets merged(to be merged)? > > Thanks > Nitesh > > we have many testcases you can refer to as an example. Your cover-letter mentions that you have tested this code, just move all the testcases to the blktests. More importantly for a feature like this you should be providing outstanding testcases in your github tree when you post the series, it should cover critical parts of the block layer and drivers in question. The objective here is to have blktests updated when the code is upstream so all the distros can test the code from upstream blktest repo. You can refer to what we have done it for NVMeOF in-band authentication (Thanks to Hannes and Sagi in linux-nvme email-archives. -ck ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 00/10] Implement copy offload support @ 2022-11-30 0:05 ` Chaitanya Kulkarni 0 siblings, 0 replies; 67+ messages in thread From: Chaitanya Kulkarni @ 2022-11-30 0:05 UTC (permalink / raw) To: Nitesh Shetty Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, nitheshshetty, james.smart, shinichiro.kawasaki, p.raghav, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, damien.lemoal On 11/29/22 04:16, Nitesh Shetty wrote: > On Wed, Nov 23, 2022 at 10:56:23PM +0000, Chaitanya Kulkarni wrote: >> (+ Shinichiro) >> >> On 11/22/22 21:58, Nitesh Shetty wrote: >>> The patch series covers the points discussed in November 2021 virtual >>> call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. >>> We have covered the initial agreed requirements in this patchset and >>> further additional features suggested by community. >>> Patchset borrows Mikulas's token based approach for 2 bdev >>> implementation. >>> >>> This is on top of our previous patchset v4[1]. >> >> Now that series is converging, since patch-series touches >> drivers and key components in the block layer you need accompany >> the patch-series with the blktests to cover the corner cases in the >> drivers which supports this operations, as I mentioned this in the >> call last year.... >> >> If you need any help with that feel free to send an email to linux-block >> and CC me or Shinichiro (added in CC )... >> >> -ck >> > > Yes any help would be appreciated. I am not familiar with blktest > development/testing cycle. Do we need add blktests along with patch > series or do we need to add after patch series gets merged(to be merged)? > > Thanks > Nitesh > > we have many testcases you can refer to as an example. Your cover-letter mentions that you have tested this code, just move all the testcases to the blktests. More importantly for a feature like this you should be providing outstanding testcases in your github tree when you post the series, it should cover critical parts of the block layer and drivers in question. The objective here is to have blktests updated when the code is upstream so all the distros can test the code from upstream blktest repo. You can refer to what we have done it for NVMeOF in-band authentication (Thanks to Hannes and Sagi in linux-nvme email-archives. -ck -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [PATCH v5 00/10] Implement copy offload support 2022-11-30 0:05 ` [dm-devel] " Chaitanya Kulkarni @ 2022-11-30 4:14 ` Nitesh Shetty -1 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-30 4:14 UTC (permalink / raw) To: Chaitanya Kulkarni Cc: linux-block, agk, linux-kernel, linux-nvme, linux-fsdevel, axboe, viro, sagi, anuj20.g, joshi.k, p.raghav, naohiro.aota, damien.lemoal, snitzer, kbusch, jth, nitheshshetty, james.smart, gost.dev, dm-devel, hch, shinichiro.kawasaki [-- Attachment #1: Type: text/plain, Size: 2120 bytes --] On Wed, Nov 30, 2022 at 12:05:00AM +0000, Chaitanya Kulkarni wrote: > On 11/29/22 04:16, Nitesh Shetty wrote: > > On Wed, Nov 23, 2022 at 10:56:23PM +0000, Chaitanya Kulkarni wrote: > >> (+ Shinichiro) > >> > >> On 11/22/22 21:58, Nitesh Shetty wrote: > >>> The patch series covers the points discussed in November 2021 virtual > >>> call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. > >>> We have covered the initial agreed requirements in this patchset and > >>> further additional features suggested by community. > >>> Patchset borrows Mikulas's token based approach for 2 bdev > >>> implementation. > >>> > >>> This is on top of our previous patchset v4[1]. > >> > >> Now that series is converging, since patch-series touches > >> drivers and key components in the block layer you need accompany > >> the patch-series with the blktests to cover the corner cases in the > >> drivers which supports this operations, as I mentioned this in the > >> call last year.... > >> > >> If you need any help with that feel free to send an email to linux-block > >> and CC me or Shinichiro (added in CC )... > >> > >> -ck > >> > > > > Yes any help would be appreciated. I am not familiar with blktest > > development/testing cycle. Do we need add blktests along with patch > > series or do we need to add after patch series gets merged(to be merged)? > > > > Thanks > > Nitesh > > > > > > we have many testcases you can refer to as an example. > Your cover-letter mentions that you have tested this code, just move > all the testcases to the blktests. > > More importantly for a feature like this you should be providing > outstanding testcases in your github tree when you post the > series, it should cover critical parts of the block layer and > drivers in question. > > The objective here is to have blktests updated when the code > is upstream so all the distros can test the code from > upstream blktest repo. You can refer to what we have done it > for NVMeOF in-band authentication (Thanks to Hannes and Sagi > in linux-nvme email-archives. > > -ck > Sure, next version will update blktest. Thank you, Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 67+ messages in thread
* Re: [dm-devel] [PATCH v5 00/10] Implement copy offload support @ 2022-11-30 4:14 ` Nitesh Shetty 0 siblings, 0 replies; 67+ messages in thread From: Nitesh Shetty @ 2022-11-30 4:14 UTC (permalink / raw) To: Chaitanya Kulkarni Cc: linux-nvme, dm-devel, hch, agk, naohiro.aota, sagi, gost.dev, nitheshshetty, james.smart, shinichiro.kawasaki, p.raghav, anuj20.g, snitzer, linux-block, viro, kbusch, axboe, joshi.k, linux-kernel, linux-fsdevel, jth, damien.lemoal [-- Attachment #1: Type: text/plain, Size: 2120 bytes --] On Wed, Nov 30, 2022 at 12:05:00AM +0000, Chaitanya Kulkarni wrote: > On 11/29/22 04:16, Nitesh Shetty wrote: > > On Wed, Nov 23, 2022 at 10:56:23PM +0000, Chaitanya Kulkarni wrote: > >> (+ Shinichiro) > >> > >> On 11/22/22 21:58, Nitesh Shetty wrote: > >>> The patch series covers the points discussed in November 2021 virtual > >>> call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0]. > >>> We have covered the initial agreed requirements in this patchset and > >>> further additional features suggested by community. > >>> Patchset borrows Mikulas's token based approach for 2 bdev > >>> implementation. > >>> > >>> This is on top of our previous patchset v4[1]. > >> > >> Now that series is converging, since patch-series touches > >> drivers and key components in the block layer you need accompany > >> the patch-series with the blktests to cover the corner cases in the > >> drivers which supports this operations, as I mentioned this in the > >> call last year.... > >> > >> If you need any help with that feel free to send an email to linux-block > >> and CC me or Shinichiro (added in CC )... > >> > >> -ck > >> > > > > Yes any help would be appreciated. I am not familiar with blktest > > development/testing cycle. Do we need add blktests along with patch > > series or do we need to add after patch series gets merged(to be merged)? > > > > Thanks > > Nitesh > > > > > > we have many testcases you can refer to as an example. > Your cover-letter mentions that you have tested this code, just move > all the testcases to the blktests. > > More importantly for a feature like this you should be providing > outstanding testcases in your github tree when you post the > series, it should cover critical parts of the block layer and > drivers in question. > > The objective here is to have blktests updated when the code > is upstream so all the distros can test the code from > upstream blktest repo. You can refer to what we have done it > for NVMeOF in-band authentication (Thanks to Hannes and Sagi > in linux-nvme email-archives. > > -ck > Sure, next version will update blktest. Thank you, Nitesh [-- Attachment #2: Type: text/plain, Size: 0 bytes --] [-- Attachment #3: Type: text/plain, Size: 98 bytes --] -- dm-devel mailing list dm-devel@redhat.com https://listman.redhat.com/mailman/listinfo/dm-devel ^ permalink raw reply [flat|nested] 67+ messages in thread
end of thread, other threads:[~2022-12-15 12:35 UTC | newest]
Thread overview: 67+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20221123061010epcas5p21cef9d23e4362b01f2b19d1117e1cdf5@epcas5p2.samsung.com>
2022-11-23 5:58 ` [PATCH v5 00/10] Implement copy offload support Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
[not found] ` <CGME20221123061014epcas5p150fd8add12fe6d09b63c56972818e6a2@epcas5p1.samsung.com>
2022-11-23 5:58 ` [PATCH v5 01/10] block: Introduce queue limits for copy-offload support Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
[not found] ` <CGME20221123061017epcas5p246a589e20eac655ac340cfda6028ff35@epcas5p2.samsung.com>
2022-11-23 5:58 ` [PATCH v5 02/10] block: Add copy offload support infrastructure Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
2022-11-23 8:04 ` Ming Lei
2022-11-23 8:04 ` [dm-devel] " Ming Lei
2022-11-23 10:07 ` Nitesh Shetty
2022-11-23 10:07 ` [dm-devel] " Nitesh Shetty
2022-11-24 0:03 ` Ming Lei
2022-11-24 0:03 ` [dm-devel] " Ming Lei
2022-11-29 11:44 ` Nitesh Shetty
2022-11-29 11:44 ` [dm-devel] " Nitesh Shetty
2022-12-07 5:54 ` Nitesh Shetty
2022-12-07 5:54 ` [dm-devel] " Nitesh Shetty
2022-12-07 11:19 ` Ming Lei
2022-12-07 11:19 ` [dm-devel] " Ming Lei
2022-12-09 8:16 ` Nitesh Shetty
2022-12-09 8:16 ` [dm-devel] " Nitesh Shetty
[not found] ` <CGME20221123061021epcas5p276b6d48db889932282d017b27c9a3291@epcas5p2.samsung.com>
2022-11-23 5:58 ` [PATCH v5 03/10] block: add emulation for copy Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
[not found] ` <CGME20221123061024epcas5p28fd0296018950d722b5a97e2875cf391@epcas5p2.samsung.com>
2022-11-23 5:58 ` [PATCH v5 04/10] block: Introduce a new ioctl " Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
[not found] ` <CGME20221123061028epcas5p1aecd27b2f4f694b5a18b51d3df5d7432@epcas5p1.samsung.com>
2022-11-23 5:58 ` [PATCH v5 05/10] nvme: add copy offload support Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
[not found] ` <CGME20221123061031epcas5p3745558c2caffd2fd21d15feff00495e9@epcas5p3.samsung.com>
2022-11-23 5:58 ` [PATCH v5 06/10] nvmet: add copy command support for bdev and file ns Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
2022-11-23 8:17 ` Guixin Liu
2022-11-23 9:39 ` Nitesh Shetty
2022-11-23 9:39 ` [dm-devel] " Nitesh Shetty
2022-12-06 9:22 ` kernel test robot
2022-12-06 9:22 ` [dm-devel] " kernel test robot
[not found] ` <CGME20221123061034epcas5p3fe90293ad08df4901f98bae2d7cfc1ba@epcas5p3.samsung.com>
2022-11-23 5:58 ` [PATCH v5 07/10] dm: Add support for copy offload Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
[not found] ` <CGME20221123061037epcas5p4d57436204fbe0065819b156eeeddbfac@epcas5p4.samsung.com>
2022-11-23 5:58 ` [PATCH v5 08/10] dm: Enable copy offload for dm-linear target Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
[not found] ` <CGME20221123061041epcas5p4413569a46ee730cd3033a9025c8f134a@epcas5p4.samsung.com>
2022-11-23 5:58 ` [PATCH v5 09/10] dm kcopyd: use copy offload support Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
[not found] ` <CGME20221123061044epcas5p2ac082a91fc8197821f29e84278b6203c@epcas5p2.samsung.com>
2022-11-23 5:58 ` [PATCH v5 10/10] fs: add support for copy file range in zonefs Nitesh Shetty
2022-11-23 5:58 ` [dm-devel] " Nitesh Shetty
2022-11-23 6:53 ` Amir Goldstein
2022-11-23 6:53 ` [dm-devel] " Amir Goldstein
2022-11-23 10:13 ` Nitesh Shetty
2022-11-23 10:13 ` [dm-devel] " Nitesh Shetty
2022-11-24 1:32 ` Damien Le Moal
2022-11-24 1:32 ` [dm-devel] " Damien Le Moal
2022-11-24 1:47 ` Damien Le Moal
2022-11-24 1:47 ` [dm-devel] " Damien Le Moal
2022-11-25 4:18 ` Al Viro
2022-11-25 4:18 ` [dm-devel] " Al Viro
2022-11-29 12:22 ` Nitesh Shetty
2022-11-29 12:22 ` [dm-devel] " Nitesh Shetty
2022-11-29 23:45 ` Damien Le Moal
2022-11-29 23:45 ` [dm-devel] " Damien Le Moal
2022-11-30 4:17 ` Nitesh Shetty
2022-11-30 4:17 ` [dm-devel] " Nitesh Shetty
2022-11-30 9:55 ` Damien Le Moal
2022-11-30 9:55 ` [dm-devel] " Damien Le Moal
2022-11-23 22:56 ` [PATCH v5 00/10] Implement copy offload support Chaitanya Kulkarni
2022-11-23 22:56 ` [dm-devel] " Chaitanya Kulkarni
2022-11-29 12:16 ` Nitesh Shetty
2022-11-29 12:16 ` [dm-devel] " Nitesh Shetty
2022-11-30 0:05 ` Chaitanya Kulkarni
2022-11-30 0:05 ` [dm-devel] " Chaitanya Kulkarni
2022-11-30 4:14 ` Nitesh Shetty
2022-11-30 4:14 ` [dm-devel] " Nitesh Shetty
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.