From: Icenowy Zheng <uwu@icenowy.me>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Matthias Kaehlcke <mka@chromium.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, Icenowy Zheng <uwu@icenowy.me>
Subject: [PATCH v2 0/6] Rongpin RP-H6B support (and support for GL850G)
Date: Fri, 2 Dec 2022 16:16:41 +0800 [thread overview]
Message-ID: <20221202081647.3183870-1-uwu@icenowy.me> (raw)
This patchset adds support for Rongpin RP-H6B, and as a dependency,
power sequence support for its onboard USB hub, GL850G.
The first 3 patches are for GL850G, adding a binding for it and adding
its support to onboard_usb_hub driver.
The last 3 patches are for RP-H6B, also 2 for adding a binding and 1 for
the real DT.
Icenowy Zheng (6):
dt-bindings: vendor-prefixes: add Genesys Logic
dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
vendor-prefixes: Add Shenzhen Rongpin Electronics Co., Ltd
dt-bindings: arm: sunxi: add Rongpin RP-H6B board
arm64: dts: allwinner: h6: add Rongpin RP-H6C SoM and RP-H6B board
.../devicetree/bindings/arm/sunxi.yaml | 6 +
.../bindings/usb/genesys,gl850g.yaml | 47 ++++
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-h6-rp-h6b.dts | 239 ++++++++++++++++++
.../boot/dts/allwinner/sun50i-h6-rp-h6c.dtsi | 180 +++++++++++++
drivers/usb/misc/onboard_usb_hub.c | 2 +
drivers/usb/misc/onboard_usb_hub.h | 5 +
8 files changed, 484 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-rp-h6b.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-rp-h6c.dtsi
--
2.38.1
WARNING: multiple messages have this Message-ID (diff)
From: Icenowy Zheng <uwu@icenowy.me>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Matthias Kaehlcke <mka@chromium.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, Icenowy Zheng <uwu@icenowy.me>
Subject: [PATCH v2 0/6] Rongpin RP-H6B support (and support for GL850G)
Date: Fri, 2 Dec 2022 16:16:41 +0800 [thread overview]
Message-ID: <20221202081647.3183870-1-uwu@icenowy.me> (raw)
This patchset adds support for Rongpin RP-H6B, and as a dependency,
power sequence support for its onboard USB hub, GL850G.
The first 3 patches are for GL850G, adding a binding for it and adding
its support to onboard_usb_hub driver.
The last 3 patches are for RP-H6B, also 2 for adding a binding and 1 for
the real DT.
Icenowy Zheng (6):
dt-bindings: vendor-prefixes: add Genesys Logic
dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
vendor-prefixes: Add Shenzhen Rongpin Electronics Co., Ltd
dt-bindings: arm: sunxi: add Rongpin RP-H6B board
arm64: dts: allwinner: h6: add Rongpin RP-H6C SoM and RP-H6B board
.../devicetree/bindings/arm/sunxi.yaml | 6 +
.../bindings/usb/genesys,gl850g.yaml | 47 ++++
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-h6-rp-h6b.dts | 239 ++++++++++++++++++
.../boot/dts/allwinner/sun50i-h6-rp-h6c.dtsi | 180 +++++++++++++
drivers/usb/misc/onboard_usb_hub.c | 2 +
drivers/usb/misc/onboard_usb_hub.h | 5 +
8 files changed, 484 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-rp-h6b.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-rp-h6c.dtsi
--
2.38.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-12-02 8:17 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-02 8:16 Icenowy Zheng [this message]
2022-12-02 8:16 ` [PATCH v2 0/6] Rongpin RP-H6B support (and support for GL850G) Icenowy Zheng
2022-12-02 8:16 ` [PATCH v2 1/6] dt-bindings: vendor-prefixes: add Genesys Logic Icenowy Zheng
2022-12-02 8:16 ` Icenowy Zheng
2022-12-02 8:16 ` [PATCH v2 2/6] dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller Icenowy Zheng
2022-12-02 8:16 ` Icenowy Zheng
2022-12-02 9:02 ` Krzysztof Kozlowski
2022-12-02 9:02 ` Krzysztof Kozlowski
2022-12-02 16:54 ` Icenowy Zheng
2022-12-02 16:54 ` Icenowy Zheng
2022-12-02 16:59 ` Krzysztof Kozlowski
2022-12-02 16:59 ` Krzysztof Kozlowski
2022-12-02 17:00 ` Icenowy Zheng
2022-12-02 17:00 ` Icenowy Zheng
2022-12-02 8:16 ` [PATCH v2 3/6] usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support Icenowy Zheng
2022-12-02 8:16 ` Icenowy Zheng
2022-12-02 16:52 ` Matthias Kaehlcke
2022-12-02 16:52 ` Matthias Kaehlcke
2022-12-02 8:16 ` [PATCH v2 4/6] vendor-prefixes: Add Shenzhen Rongpin Electronics Co., Ltd Icenowy Zheng
2022-12-02 8:16 ` Icenowy Zheng
2022-12-02 8:16 ` [PATCH v2 5/6] dt-bindings: arm: sunxi: add Rongpin RP-H6B board Icenowy Zheng
2022-12-02 8:16 ` Icenowy Zheng
2022-12-03 2:02 ` Samuel Holland
2022-12-03 2:02 ` Samuel Holland
2022-12-02 8:16 ` [PATCH v2 6/6] arm64: dts: allwinner: h6: add Rongpin RP-H6C SoM and " Icenowy Zheng
2022-12-02 8:16 ` Icenowy Zheng
2022-12-03 2:11 ` Samuel Holland
2022-12-03 2:11 ` Samuel Holland
2022-12-03 5:15 ` Icenowy Zheng
2022-12-03 5:15 ` Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221202081647.3183870-1-uwu@icenowy.me \
--to=uwu@icenowy.me \
--cc=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-usb@vger.kernel.org \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.