[PATCH 1/9] media: dt-bindings: amlogic,meson-gx-ao-cec: move to cec subfolder

[PATCH 1/9] media: dt-bindings: amlogic,meson-gx-ao-cec: move to cec subfolder

[Krzysztof Kozlowski]

Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop
unneeded quotes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml     | 4 ++--
 MAINTAINERS                                                   | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
 rename Documentation/devicetree/bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml (93%)

diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
similarity index 93%
rename from Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
rename to Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
index 8d844f4312d1..f65c9681a9f7 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,meson-gx-ao-cec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/cec/amlogic,meson-gx-ao-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson AO-CEC Controller
 
diff --git a/MAINTAINERS b/MAINTAINERS
index e3f3c3e53f77..07cb85cac4c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13553,7 +13553,7 @@ L:	linux-amlogic@lists.infradead.org
 S:	Supported
 W:	http://linux-meson.com/
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+F:	Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
 F:	drivers/media/cec/platform/meson/ao-cec-g12a.c
 F:	drivers/media/cec/platform/meson/ao-cec.c
 
-- 
2.34.1

[PATCH 1/9] media: dt-bindings: amlogic,meson-gx-ao-cec: move to cec subfolder

[Krzysztof Kozlowski]

Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop
unneeded quotes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml     | 4 ++--
 MAINTAINERS                                                   | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
 rename Documentation/devicetree/bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml (93%)

diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
similarity index 93%
rename from Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
rename to Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
index 8d844f4312d1..f65c9681a9f7 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,meson-gx-ao-cec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/cec/amlogic,meson-gx-ao-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson AO-CEC Controller
 
diff --git a/MAINTAINERS b/MAINTAINERS
index e3f3c3e53f77..07cb85cac4c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13553,7 +13553,7 @@ L:	linux-amlogic@lists.infradead.org
 S:	Supported
 W:	http://linux-meson.com/
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+F:	Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
 F:	drivers/media/cec/platform/meson/ao-cec-g12a.c
 F:	drivers/media/cec/platform/meson/ao-cec.c
 
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/9] media: dt-bindings: amlogic,meson-gx-ao-cec: move to cec subfolder

[Krzysztof Kozlowski]

Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop
unneeded quotes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml     | 4 ++--
 MAINTAINERS                                                   | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
 rename Documentation/devicetree/bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml (93%)

diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
similarity index 93%
rename from Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
rename to Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
index 8d844f4312d1..f65c9681a9f7 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,meson-gx-ao-cec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/cec/amlogic,meson-gx-ao-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson AO-CEC Controller
 
diff --git a/MAINTAINERS b/MAINTAINERS
index e3f3c3e53f77..07cb85cac4c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13553,7 +13553,7 @@ L:	linux-amlogic@lists.infradead.org
 S:	Supported
 W:	http://linux-meson.com/
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+F:	Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
 F:	drivers/media/cec/platform/meson/ao-cec-g12a.c
 F:	drivers/media/cec/platform/meson/ao-cec.c
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/9] media: dt-bindings: st,stm32-cec: move to cec subfolder

[Krzysztof Kozlowski]

Move st,stm32-cec.yaml bindings to cec subfolder and drop unneeded
"bindings" in the title.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/{ => cec}/st,stm32-cec.yaml     | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/media/{ => cec}/st,stm32-cec.yaml (89%)

diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
similarity index 89%
rename from Documentation/devicetree/bindings/media/st,stm32-cec.yaml
rename to Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
index 77144cc6f7db..2314a9a14650 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/st,stm32-cec.yaml#
+$id: http://devicetree.org/schemas/media/cec/st,stm32-cec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CEC bindings
+title: STMicroelectronics STM32 CEC
 
 maintainers:
   - Yannick Fertre <yannick.fertre@foss.st.com>
-- 
2.34.1

[PATCH 2/9] media: dt-bindings: st,stm32-cec: move to cec subfolder

[Krzysztof Kozlowski]

Move st,stm32-cec.yaml bindings to cec subfolder and drop unneeded
"bindings" in the title.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/{ => cec}/st,stm32-cec.yaml     | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/media/{ => cec}/st,stm32-cec.yaml (89%)

diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
similarity index 89%
rename from Documentation/devicetree/bindings/media/st,stm32-cec.yaml
rename to Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
index 77144cc6f7db..2314a9a14650 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/st,stm32-cec.yaml#
+$id: http://devicetree.org/schemas/media/cec/st,stm32-cec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CEC bindings
+title: STMicroelectronics STM32 CEC
 
 maintainers:
   - Yannick Fertre <yannick.fertre@foss.st.com>
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/9] media: dt-bindings: st,stm32-cec: move to cec subfolder

[Krzysztof Kozlowski]

Move st,stm32-cec.yaml bindings to cec subfolder and drop unneeded
"bindings" in the title.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/{ => cec}/st,stm32-cec.yaml     | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/media/{ => cec}/st,stm32-cec.yaml (89%)

diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
similarity index 89%
rename from Documentation/devicetree/bindings/media/st,stm32-cec.yaml
rename to Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
index 77144cc6f7db..2314a9a14650 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/st,stm32-cec.yaml#
+$id: http://devicetree.org/schemas/media/cec/st,stm32-cec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CEC bindings
+title: STMicroelectronics STM32 CEC
 
 maintainers:
   - Yannick Fertre <yannick.fertre@foss.st.com>
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/9] media: dt-bindings: cec: convert common CEC properties to DT schema

[Krzysztof Kozlowski]

Convert common HDMI CEC adapter bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/cec.txt         |  8 ------
 .../bindings/media/cec/cec-common.yaml        | 28 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 29 insertions(+), 9 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/cec.txt
 create mode 100644 Documentation/devicetree/bindings/media/cec/cec-common.yaml

diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt
deleted file mode 100644
index 22d7aae3d3d7..000000000000
--- a/Documentation/devicetree/bindings/media/cec.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Common bindings for HDMI CEC adapters
-
-- hdmi-phandle: phandle to the HDMI controller.
-
-- needs-hpd: if present the CEC support is only available when the HPD
-  is high. Some boards only let the CEC pin through if the HPD is high,
-  for example if there is a level converter that uses the HPD to power
-  up or down.
diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
new file mode 100644
index 000000000000..af6ee5f1c73f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC Adapters Common Properties
+
+maintainers:
+  - Hans Verkuil <hverkuil@xs4all.nl>
+
+properties:
+  $nodename:
+    pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$"
+
+  hdmi-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI controller.
+
+  needs-hpd:
+    type: boolean
+    description:
+      The CEC support is only available when the HPD is high. Some boards only
+      let the CEC pin through if the HPD is high, for example if there is a
+      level converter that uses the HPD to power up or down.
+
+additionalProperties: true
diff --git a/MAINTAINERS b/MAINTAINERS
index 07cb85cac4c3..45402e03cda5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4832,7 +4832,7 @@ S:	Supported
 W:	http://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/ABI/testing/debugfs-cec-error-inj
-F:	Documentation/devicetree/bindings/media/cec.txt
+F:	Documentation/devicetree/bindings/media/cec/cec-common.yaml
 F:	Documentation/driver-api/media/cec-core.rst
 F:	Documentation/userspace-api/media/cec
 F:	drivers/media/cec/
-- 
2.34.1

[PATCH 3/9] media: dt-bindings: cec: convert common CEC properties to DT schema

[Krzysztof Kozlowski]

Convert common HDMI CEC adapter bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/cec.txt         |  8 ------
 .../bindings/media/cec/cec-common.yaml        | 28 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 29 insertions(+), 9 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/cec.txt
 create mode 100644 Documentation/devicetree/bindings/media/cec/cec-common.yaml

diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt
deleted file mode 100644
index 22d7aae3d3d7..000000000000
--- a/Documentation/devicetree/bindings/media/cec.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Common bindings for HDMI CEC adapters
-
-- hdmi-phandle: phandle to the HDMI controller.
-
-- needs-hpd: if present the CEC support is only available when the HPD
-  is high. Some boards only let the CEC pin through if the HPD is high,
-  for example if there is a level converter that uses the HPD to power
-  up or down.
diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
new file mode 100644
index 000000000000..af6ee5f1c73f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC Adapters Common Properties
+
+maintainers:
+  - Hans Verkuil <hverkuil@xs4all.nl>
+
+properties:
+  $nodename:
+    pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$"
+
+  hdmi-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI controller.
+
+  needs-hpd:
+    type: boolean
+    description:
+      The CEC support is only available when the HPD is high. Some boards only
+      let the CEC pin through if the HPD is high, for example if there is a
+      level converter that uses the HPD to power up or down.
+
+additionalProperties: true
diff --git a/MAINTAINERS b/MAINTAINERS
index 07cb85cac4c3..45402e03cda5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4832,7 +4832,7 @@ S:	Supported
 W:	http://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/ABI/testing/debugfs-cec-error-inj
-F:	Documentation/devicetree/bindings/media/cec.txt
+F:	Documentation/devicetree/bindings/media/cec/cec-common.yaml
 F:	Documentation/driver-api/media/cec-core.rst
 F:	Documentation/userspace-api/media/cec
 F:	drivers/media/cec/
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 3/9] media: dt-bindings: cec: convert common CEC properties to DT schema

[Krzysztof Kozlowski]

Convert common HDMI CEC adapter bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/cec.txt         |  8 ------
 .../bindings/media/cec/cec-common.yaml        | 28 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 29 insertions(+), 9 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/cec.txt
 create mode 100644 Documentation/devicetree/bindings/media/cec/cec-common.yaml

diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt
deleted file mode 100644
index 22d7aae3d3d7..000000000000
--- a/Documentation/devicetree/bindings/media/cec.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Common bindings for HDMI CEC adapters
-
-- hdmi-phandle: phandle to the HDMI controller.
-
-- needs-hpd: if present the CEC support is only available when the HPD
-  is high. Some boards only let the CEC pin through if the HPD is high,
-  for example if there is a level converter that uses the HPD to power
-  up or down.
diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
new file mode 100644
index 000000000000..af6ee5f1c73f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC Adapters Common Properties
+
+maintainers:
+  - Hans Verkuil <hverkuil@xs4all.nl>
+
+properties:
+  $nodename:
+    pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$"
+
+  hdmi-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI controller.
+
+  needs-hpd:
+    type: boolean
+    description:
+      The CEC support is only available when the HPD is high. Some boards only
+      let the CEC pin through if the HPD is high, for example if there is a
+      level converter that uses the HPD to power up or down.
+
+additionalProperties: true
diff --git a/MAINTAINERS b/MAINTAINERS
index 07cb85cac4c3..45402e03cda5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4832,7 +4832,7 @@ S:	Supported
 W:	http://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/ABI/testing/debugfs-cec-error-inj
-F:	Documentation/devicetree/bindings/media/cec.txt
+F:	Documentation/devicetree/bindings/media/cec/cec-common.yaml
 F:	Documentation/driver-api/media/cec-core.rst
 F:	Documentation/userspace-api/media/cec
 F:	drivers/media/cec/
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/9] media: dt-bindings: amlogic,meson-gx-ao-cec: reference common CEC properties

[Krzysztof Kozlowski]

Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/amlogic,meson-gx-ao-cec.yaml        | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
index f65c9681a9f7..b1fab53418f9 100644
--- a/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
@@ -33,11 +33,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-    $ref: /schemas/types.yaml#/definitions/phandle
-
 allOf:
+  - $ref: cec-common.yaml#
   - if:
       properties:
         compatible:
@@ -81,7 +78,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1

[PATCH 4/9] media: dt-bindings: amlogic,meson-gx-ao-cec: reference common CEC properties

[Krzysztof Kozlowski]

Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/amlogic,meson-gx-ao-cec.yaml        | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
index f65c9681a9f7..b1fab53418f9 100644
--- a/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
@@ -33,11 +33,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-    $ref: /schemas/types.yaml#/definitions/phandle
-
 allOf:
+  - $ref: cec-common.yaml#
   - if:
       properties:
         compatible:
@@ -81,7 +78,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 4/9] media: dt-bindings: amlogic,meson-gx-ao-cec: reference common CEC properties

[Krzysztof Kozlowski]

Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/amlogic,meson-gx-ao-cec.yaml        | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
index f65c9681a9f7..b1fab53418f9 100644
--- a/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
@@ -33,11 +33,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-    $ref: /schemas/types.yaml#/definitions/phandle
-
 allOf:
+  - $ref: cec-common.yaml#
   - if:
       properties:
         compatible:
@@ -81,7 +78,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/9] media: dt-bindings: chrontel,ch7322: reference common CEC properties

[Krzysztof Kozlowski]

Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/i2c/chrontel,ch7322.yaml   | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
index 63e5b89d2e0b..50937bf5ebda 100644
--- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -13,6 +13,9 @@ description:
   The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
   programmable through I2C and drives a single CEC line.
 
+allOf:
+  - $ref: /schemas/media/cec/cec-common.yaml#
+
 properties:
   compatible:
     const: chrontel,ch7322
@@ -40,16 +43,12 @@ properties:
       if in auto mode.
     maxItems: 1
 
-  # see ../cec.txt
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1

[PATCH 5/9] media: dt-bindings: chrontel,ch7322: reference common CEC properties

[Krzysztof Kozlowski]

Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/i2c/chrontel,ch7322.yaml   | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
index 63e5b89d2e0b..50937bf5ebda 100644
--- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -13,6 +13,9 @@ description:
   The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
   programmable through I2C and drives a single CEC line.
 
+allOf:
+  - $ref: /schemas/media/cec/cec-common.yaml#
+
 properties:
   compatible:
     const: chrontel,ch7322
@@ -40,16 +43,12 @@ properties:
       if in auto mode.
     maxItems: 1
 
-  # see ../cec.txt
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 5/9] media: dt-bindings: chrontel,ch7322: reference common CEC properties

[Krzysztof Kozlowski]

Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/i2c/chrontel,ch7322.yaml   | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
index 63e5b89d2e0b..50937bf5ebda 100644
--- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -13,6 +13,9 @@ description:
   The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
   programmable through I2C and drives a single CEC line.
 
+allOf:
+  - $ref: /schemas/media/cec/cec-common.yaml#
+
 properties:
   compatible:
     const: chrontel,ch7322
@@ -40,16 +43,12 @@ properties:
       if in auto mode.
     maxItems: 1
 
-  # see ../cec.txt
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/9] media: dt-bindings: samsung,s5p-cec: convert to DT schema

[Krzysztof Kozlowski]

Convert Samsung S5P HDMI CEC adapter bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/samsung,s5p-cec.yaml   | 66 +++++++++++++++++++
 .../devicetree/bindings/media/s5p-cec.txt     | 36 ----------
 MAINTAINERS                                   |  2 +-
 3 files changed, 67 insertions(+), 37 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/s5p-cec.txt

diff --git a/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
new file mode 100644
index 000000000000..016c8a77c1a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/samsung,s5p-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos HDMI CEC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s5p-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hdmicec
+
+  interrupts:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - samsung,syscon-phandle
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@101b0000 {
+        compatible = "samsung,s5p-cec";
+        reg = <0x101B0000 0x200>;
+
+        clocks = <&clock CLK_HDMI_CEC>;
+        clock-names = "hdmicec";
+        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+        hdmi-phandle = <&hdmi>;
+        needs-hpd;
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_cec>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
deleted file mode 100644
index e847291d4aff..000000000000
--- a/Documentation/devicetree/bindings/media/s5p-cec.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Samsung HDMI CEC driver
-
-The HDMI CEC module is present is Samsung SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be following
-	"samsung,s5p-cec"
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "hdmicec",
-		  corresponding to entry in the clocks property.
-  - samsung,syscon-phandle - phandle to the PMU system controller
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-Optional:
-  - needs-hpd : if present the CEC support is only available when the HPD
-		is high. See cec.txt for more details.
-
-Example:
-
-hdmicec: cec@100b0000 {
-	compatible = "samsung,s5p-cec";
-	reg = <0x100B0000 0x200>;
-	interrupts = <0 114 0>;
-	clocks = <&clock CLK_HDMI_CEC>;
-	clock-names = "hdmicec";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-	hdmi-phandle = <&hdmi>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 45402e03cda5..05acbaecef52 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2866,7 +2866,7 @@ M:	Marek Szyprowski <m.szyprowski@samsung.com>
 L:	linux-samsung-soc@vger.kernel.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/s5p-cec.txt
+F:	Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
 F:	drivers/media/cec/platform/s5p/
 
 ARM/SAMSUNG S5P SERIES JPEG CODEC SUPPORT
-- 
2.34.1

[PATCH 6/9] media: dt-bindings: samsung,s5p-cec: convert to DT schema

[Krzysztof Kozlowski]

Convert Samsung S5P HDMI CEC adapter bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/samsung,s5p-cec.yaml   | 66 +++++++++++++++++++
 .../devicetree/bindings/media/s5p-cec.txt     | 36 ----------
 MAINTAINERS                                   |  2 +-
 3 files changed, 67 insertions(+), 37 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/s5p-cec.txt

diff --git a/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
new file mode 100644
index 000000000000..016c8a77c1a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/samsung,s5p-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos HDMI CEC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s5p-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hdmicec
+
+  interrupts:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - samsung,syscon-phandle
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@101b0000 {
+        compatible = "samsung,s5p-cec";
+        reg = <0x101B0000 0x200>;
+
+        clocks = <&clock CLK_HDMI_CEC>;
+        clock-names = "hdmicec";
+        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+        hdmi-phandle = <&hdmi>;
+        needs-hpd;
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_cec>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
deleted file mode 100644
index e847291d4aff..000000000000
--- a/Documentation/devicetree/bindings/media/s5p-cec.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Samsung HDMI CEC driver
-
-The HDMI CEC module is present is Samsung SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be following
-	"samsung,s5p-cec"
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "hdmicec",
-		  corresponding to entry in the clocks property.
-  - samsung,syscon-phandle - phandle to the PMU system controller
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-Optional:
-  - needs-hpd : if present the CEC support is only available when the HPD
-		is high. See cec.txt for more details.
-
-Example:
-
-hdmicec: cec@100b0000 {
-	compatible = "samsung,s5p-cec";
-	reg = <0x100B0000 0x200>;
-	interrupts = <0 114 0>;
-	clocks = <&clock CLK_HDMI_CEC>;
-	clock-names = "hdmicec";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-	hdmi-phandle = <&hdmi>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 45402e03cda5..05acbaecef52 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2866,7 +2866,7 @@ M:	Marek Szyprowski <m.szyprowski@samsung.com>
 L:	linux-samsung-soc@vger.kernel.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/s5p-cec.txt
+F:	Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
 F:	drivers/media/cec/platform/s5p/
 
 ARM/SAMSUNG S5P SERIES JPEG CODEC SUPPORT
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 6/9] media: dt-bindings: samsung,s5p-cec: convert to DT schema

[Krzysztof Kozlowski]

Convert Samsung S5P HDMI CEC adapter bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/samsung,s5p-cec.yaml   | 66 +++++++++++++++++++
 .../devicetree/bindings/media/s5p-cec.txt     | 36 ----------
 MAINTAINERS                                   |  2 +-
 3 files changed, 67 insertions(+), 37 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/s5p-cec.txt

diff --git a/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
new file mode 100644
index 000000000000..016c8a77c1a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/samsung,s5p-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos HDMI CEC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s5p-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hdmicec
+
+  interrupts:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - samsung,syscon-phandle
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@101b0000 {
+        compatible = "samsung,s5p-cec";
+        reg = <0x101B0000 0x200>;
+
+        clocks = <&clock CLK_HDMI_CEC>;
+        clock-names = "hdmicec";
+        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+        hdmi-phandle = <&hdmi>;
+        needs-hpd;
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_cec>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
deleted file mode 100644
index e847291d4aff..000000000000
--- a/Documentation/devicetree/bindings/media/s5p-cec.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Samsung HDMI CEC driver
-
-The HDMI CEC module is present is Samsung SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be following
-	"samsung,s5p-cec"
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "hdmicec",
-		  corresponding to entry in the clocks property.
-  - samsung,syscon-phandle - phandle to the PMU system controller
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-Optional:
-  - needs-hpd : if present the CEC support is only available when the HPD
-		is high. See cec.txt for more details.
-
-Example:
-
-hdmicec: cec@100b0000 {
-	compatible = "samsung,s5p-cec";
-	reg = <0x100B0000 0x200>;
-	interrupts = <0 114 0>;
-	clocks = <&clock CLK_HDMI_CEC>;
-	clock-names = "hdmicec";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-	hdmi-phandle = <&hdmi>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 45402e03cda5..05acbaecef52 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2866,7 +2866,7 @@ M:	Marek Szyprowski <m.szyprowski@samsung.com>
 L:	linux-samsung-soc@vger.kernel.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/s5p-cec.txt
+F:	Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
 F:	drivers/media/cec/platform/s5p/
 
 ARM/SAMSUNG S5P SERIES JPEG CODEC SUPPORT
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 7/9] media: dt-bindings: cec-gpio: convert to DT schema

[Krzysztof Kozlowski]

Convert HDMI CEC GPIO bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/cec-gpio.txt    | 42 -----------
 .../bindings/media/cec/cec-gpio.yaml          | 73 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 74 insertions(+), 43 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/cec-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/media/cec/cec-gpio.yaml

diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
deleted file mode 100644
index 47e8d73d32a3..000000000000
--- a/Documentation/devicetree/bindings/media/cec-gpio.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* HDMI CEC GPIO driver
-
-The HDMI CEC GPIO module supports CEC implementations where the CEC line
-is hooked up to a pull-up GPIO line and - optionally - the HPD line is
-hooked up to another GPIO line.
-
-Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and
-5V lines it is 5.3V. So you may need some sort of level conversion circuitry
-when connecting them to a GPIO line.
-
-Required properties:
-  - compatible: value must be "cec-gpio".
-  - cec-gpios: gpio that the CEC line is connected to. The line should be
-    tagged as open drain.
-
-If the CEC line is associated with an HDMI receiver/transmitter, then the
-following property is also required:
-
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-If the CEC line is not associated with an HDMI receiver/transmitter, then
-the following property is optional and can be used for debugging HPD changes:
-
-  - hpd-gpios: gpio that the HPD line is connected to.
-
-This property is optional and can be used for debugging changes on the 5V line:
-
-  - v5-gpios: gpio that the 5V line is connected to.
-
-Example for the Raspberry Pi 3 where the CEC line is connected to
-pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is
-connected to pin 11 aka BCM17 and the 5V line is connected to pin
-15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!):
-
-#include <dt-bindings/gpio/gpio.h>
-
-cec-gpio {
-	compatible = "cec-gpio";
-	cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-	v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
new file mode 100644
index 000000000000..19169d58316a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
@@ -0,0 +1,73 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC GPIO
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+description: |
+  The HDMI CEC GPIO module supports CEC implementations where the CEC line is
+  hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
+  to another GPIO line.
+
+  Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
+  5V lines it is 5.3V. So you may need some sort of level conversion
+  circuitry when connecting them to a GPIO line.
+
+properties:
+  compatible:
+    const: cec-gpio
+
+  cec-gpios:
+    maxItems: 1
+    description:
+      GPIO that the CEC line is connected to. The line should be tagged as open
+      drain.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      GPIO that the HPD line is connected to.  Used for debugging HPD changes
+      when the CEC line is not associated with an HDMI receiver/transmitter.
+
+  v5-gpios:
+    maxItems: 1
+    description:
+      GPIO that the 5V line is connected to.  Used for debugging changes on the
+      5V line.
+
+required:
+  - compatible
+  - cec-gpios
+
+allOf:
+  - $ref: cec-common.yaml#
+  - if:
+      required:
+        - hdmi-phandle
+    then:
+      properties:
+        hpd-gpios: false
+
+  - if:
+      required:
+        - hpd-gpios
+    then:
+      properties:
+        hdmi-phandle: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    cec {
+        compatible = "cec-gpio";
+        cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+        hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+        v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 05acbaecef52..197351d3bb57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4848,7 +4848,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/cec-gpio.txt
+F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
 F:	drivers/media/cec/platform/cec-gpio/
 
 CELL BROADBAND ENGINE ARCHITECTURE
-- 
2.34.1

[PATCH 7/9] media: dt-bindings: cec-gpio: convert to DT schema

[Krzysztof Kozlowski]

Convert HDMI CEC GPIO bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/cec-gpio.txt    | 42 -----------
 .../bindings/media/cec/cec-gpio.yaml          | 73 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 74 insertions(+), 43 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/cec-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/media/cec/cec-gpio.yaml

diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
deleted file mode 100644
index 47e8d73d32a3..000000000000
--- a/Documentation/devicetree/bindings/media/cec-gpio.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* HDMI CEC GPIO driver
-
-The HDMI CEC GPIO module supports CEC implementations where the CEC line
-is hooked up to a pull-up GPIO line and - optionally - the HPD line is
-hooked up to another GPIO line.
-
-Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and
-5V lines it is 5.3V. So you may need some sort of level conversion circuitry
-when connecting them to a GPIO line.
-
-Required properties:
-  - compatible: value must be "cec-gpio".
-  - cec-gpios: gpio that the CEC line is connected to. The line should be
-    tagged as open drain.
-
-If the CEC line is associated with an HDMI receiver/transmitter, then the
-following property is also required:
-
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-If the CEC line is not associated with an HDMI receiver/transmitter, then
-the following property is optional and can be used for debugging HPD changes:
-
-  - hpd-gpios: gpio that the HPD line is connected to.
-
-This property is optional and can be used for debugging changes on the 5V line:
-
-  - v5-gpios: gpio that the 5V line is connected to.
-
-Example for the Raspberry Pi 3 where the CEC line is connected to
-pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is
-connected to pin 11 aka BCM17 and the 5V line is connected to pin
-15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!):
-
-#include <dt-bindings/gpio/gpio.h>
-
-cec-gpio {
-	compatible = "cec-gpio";
-	cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-	v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
new file mode 100644
index 000000000000..19169d58316a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
@@ -0,0 +1,73 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC GPIO
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+description: |
+  The HDMI CEC GPIO module supports CEC implementations where the CEC line is
+  hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
+  to another GPIO line.
+
+  Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
+  5V lines it is 5.3V. So you may need some sort of level conversion
+  circuitry when connecting them to a GPIO line.
+
+properties:
+  compatible:
+    const: cec-gpio
+
+  cec-gpios:
+    maxItems: 1
+    description:
+      GPIO that the CEC line is connected to. The line should be tagged as open
+      drain.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      GPIO that the HPD line is connected to.  Used for debugging HPD changes
+      when the CEC line is not associated with an HDMI receiver/transmitter.
+
+  v5-gpios:
+    maxItems: 1
+    description:
+      GPIO that the 5V line is connected to.  Used for debugging changes on the
+      5V line.
+
+required:
+  - compatible
+  - cec-gpios
+
+allOf:
+  - $ref: cec-common.yaml#
+  - if:
+      required:
+        - hdmi-phandle
+    then:
+      properties:
+        hpd-gpios: false
+
+  - if:
+      required:
+        - hpd-gpios
+    then:
+      properties:
+        hdmi-phandle: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    cec {
+        compatible = "cec-gpio";
+        cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+        hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+        v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 05acbaecef52..197351d3bb57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4848,7 +4848,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/cec-gpio.txt
+F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
 F:	drivers/media/cec/platform/cec-gpio/
 
 CELL BROADBAND ENGINE ARCHITECTURE
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 7/9] media: dt-bindings: cec-gpio: convert to DT schema

[Krzysztof Kozlowski]

Convert HDMI CEC GPIO bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/media/cec-gpio.txt    | 42 -----------
 .../bindings/media/cec/cec-gpio.yaml          | 73 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 74 insertions(+), 43 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/cec-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/media/cec/cec-gpio.yaml

diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
deleted file mode 100644
index 47e8d73d32a3..000000000000
--- a/Documentation/devicetree/bindings/media/cec-gpio.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* HDMI CEC GPIO driver
-
-The HDMI CEC GPIO module supports CEC implementations where the CEC line
-is hooked up to a pull-up GPIO line and - optionally - the HPD line is
-hooked up to another GPIO line.
-
-Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and
-5V lines it is 5.3V. So you may need some sort of level conversion circuitry
-when connecting them to a GPIO line.
-
-Required properties:
-  - compatible: value must be "cec-gpio".
-  - cec-gpios: gpio that the CEC line is connected to. The line should be
-    tagged as open drain.
-
-If the CEC line is associated with an HDMI receiver/transmitter, then the
-following property is also required:
-
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-If the CEC line is not associated with an HDMI receiver/transmitter, then
-the following property is optional and can be used for debugging HPD changes:
-
-  - hpd-gpios: gpio that the HPD line is connected to.
-
-This property is optional and can be used for debugging changes on the 5V line:
-
-  - v5-gpios: gpio that the 5V line is connected to.
-
-Example for the Raspberry Pi 3 where the CEC line is connected to
-pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is
-connected to pin 11 aka BCM17 and the 5V line is connected to pin
-15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!):
-
-#include <dt-bindings/gpio/gpio.h>
-
-cec-gpio {
-	compatible = "cec-gpio";
-	cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-	v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
new file mode 100644
index 000000000000..19169d58316a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
@@ -0,0 +1,73 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC GPIO
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+description: |
+  The HDMI CEC GPIO module supports CEC implementations where the CEC line is
+  hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
+  to another GPIO line.
+
+  Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
+  5V lines it is 5.3V. So you may need some sort of level conversion
+  circuitry when connecting them to a GPIO line.
+
+properties:
+  compatible:
+    const: cec-gpio
+
+  cec-gpios:
+    maxItems: 1
+    description:
+      GPIO that the CEC line is connected to. The line should be tagged as open
+      drain.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      GPIO that the HPD line is connected to.  Used for debugging HPD changes
+      when the CEC line is not associated with an HDMI receiver/transmitter.
+
+  v5-gpios:
+    maxItems: 1
+    description:
+      GPIO that the 5V line is connected to.  Used for debugging changes on the
+      5V line.
+
+required:
+  - compatible
+  - cec-gpios
+
+allOf:
+  - $ref: cec-common.yaml#
+  - if:
+      required:
+        - hdmi-phandle
+    then:
+      properties:
+        hpd-gpios: false
+
+  - if:
+      required:
+        - hpd-gpios
+    then:
+      properties:
+        hdmi-phandle: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    cec {
+        compatible = "cec-gpio";
+        cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+        hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+        v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 05acbaecef52..197351d3bb57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4848,7 +4848,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/cec-gpio.txt
+F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
 F:	drivers/media/cec/platform/cec-gpio/
 
 CELL BROADBAND ENGINE ARCHITECTURE
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 8/9] media: dt-bindings: nvidia,tegra-cec: convert to DT schema

[Krzysztof Kozlowski]

Convert Nvidia Tegra HDMI CEC bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/nvidia,tegra-cec.yaml  | 58 +++++++++++++++++++
 .../devicetree/bindings/media/tegra-cec.txt   | 27 ---------
 MAINTAINERS                                   |  2 +-
 3 files changed, 59 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt

diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
new file mode 100644
index 000000000000..9a4025ff7fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/nvidia,tegra-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nvidia Tegra HDMI CEC
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra114-cec
+      - nvidia,tegra124-cec
+      - nvidia,tegra210-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@70015000 {
+        compatible = "nvidia,tegra124-cec";
+        reg = <0x70015000 0x00001000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_CEC>;
+        clock-names = "cec";
+        status = "disabled";
+        hdmi-phandle = <&hdmi>;
+    };
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
deleted file mode 100644
index c503f06f3b84..000000000000
--- a/Documentation/devicetree/bindings/media/tegra-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Tegra HDMI CEC hardware
-
-The HDMI CEC module is present in Tegra SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be one of the following:
-	"nvidia,tegra114-cec"
-	"nvidia,tegra124-cec"
-	"nvidia,tegra210-cec"
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "cec",
-		  corresponding to the entry in the clocks property.
-  - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
-
-Example:
-
-cec@70015000 {
-	compatible = "nvidia,tegra124-cec";
-	reg = <0x0 0x70015000 0x0 0x00001000>;
-	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA124_CLK_CEC>;
-	clock-names = "cec";
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 197351d3bb57..dee3f776be32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2999,7 +2999,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-tegra@vger.kernel.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/tegra-cec.txt
+F:	Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
 F:	drivers/media/cec/platform/tegra/
 
 ARM/TESLA FSD SoC SUPPORT
-- 
2.34.1

[PATCH 8/9] media: dt-bindings: nvidia,tegra-cec: convert to DT schema

[Krzysztof Kozlowski]

Convert Nvidia Tegra HDMI CEC bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/nvidia,tegra-cec.yaml  | 58 +++++++++++++++++++
 .../devicetree/bindings/media/tegra-cec.txt   | 27 ---------
 MAINTAINERS                                   |  2 +-
 3 files changed, 59 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt

diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
new file mode 100644
index 000000000000..9a4025ff7fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/nvidia,tegra-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nvidia Tegra HDMI CEC
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra114-cec
+      - nvidia,tegra124-cec
+      - nvidia,tegra210-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@70015000 {
+        compatible = "nvidia,tegra124-cec";
+        reg = <0x70015000 0x00001000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_CEC>;
+        clock-names = "cec";
+        status = "disabled";
+        hdmi-phandle = <&hdmi>;
+    };
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
deleted file mode 100644
index c503f06f3b84..000000000000
--- a/Documentation/devicetree/bindings/media/tegra-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Tegra HDMI CEC hardware
-
-The HDMI CEC module is present in Tegra SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be one of the following:
-	"nvidia,tegra114-cec"
-	"nvidia,tegra124-cec"
-	"nvidia,tegra210-cec"
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "cec",
-		  corresponding to the entry in the clocks property.
-  - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
-
-Example:
-
-cec@70015000 {
-	compatible = "nvidia,tegra124-cec";
-	reg = <0x0 0x70015000 0x0 0x00001000>;
-	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA124_CLK_CEC>;
-	clock-names = "cec";
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 197351d3bb57..dee3f776be32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2999,7 +2999,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-tegra@vger.kernel.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/tegra-cec.txt
+F:	Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
 F:	drivers/media/cec/platform/tegra/
 
 ARM/TESLA FSD SoC SUPPORT
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 8/9] media: dt-bindings: nvidia,tegra-cec: convert to DT schema

[Krzysztof Kozlowski]

Convert Nvidia Tegra HDMI CEC bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/nvidia,tegra-cec.yaml  | 58 +++++++++++++++++++
 .../devicetree/bindings/media/tegra-cec.txt   | 27 ---------
 MAINTAINERS                                   |  2 +-
 3 files changed, 59 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt

diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
new file mode 100644
index 000000000000..9a4025ff7fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/nvidia,tegra-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nvidia Tegra HDMI CEC
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra114-cec
+      - nvidia,tegra124-cec
+      - nvidia,tegra210-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@70015000 {
+        compatible = "nvidia,tegra124-cec";
+        reg = <0x70015000 0x00001000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_CEC>;
+        clock-names = "cec";
+        status = "disabled";
+        hdmi-phandle = <&hdmi>;
+    };
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
deleted file mode 100644
index c503f06f3b84..000000000000
--- a/Documentation/devicetree/bindings/media/tegra-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Tegra HDMI CEC hardware
-
-The HDMI CEC module is present in Tegra SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be one of the following:
-	"nvidia,tegra114-cec"
-	"nvidia,tegra124-cec"
-	"nvidia,tegra210-cec"
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "cec",
-		  corresponding to the entry in the clocks property.
-  - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
-
-Example:
-
-cec@70015000 {
-	compatible = "nvidia,tegra124-cec";
-	reg = <0x0 0x70015000 0x0 0x00001000>;
-	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA124_CLK_CEC>;
-	clock-names = "cec";
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 197351d3bb57..dee3f776be32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2999,7 +2999,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-tegra@vger.kernel.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/tegra-cec.txt
+F:	Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
 F:	drivers/media/cec/platform/tegra/
 
 ARM/TESLA FSD SoC SUPPORT
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 9/9] media: dt-bindings: st,stih-cec: convert to DT schema

[Krzysztof Kozlowski]

Convert ST STIH4xx HDMI CEC bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/st,stih-cec.yaml       | 66 +++++++++++++++++++
 .../devicetree/bindings/media/stih-cec.txt    | 27 --------
 MAINTAINERS                                   |  2 +-
 3 files changed, 67 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/stih-cec.txt

diff --git a/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
new file mode 100644
index 000000000000..aeddf16ed339
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/st,stih-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STIH4xx HDMI CEC
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: st,stih-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec-clk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: cec-irq
+
+  resets:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - hdmi-phandle
+  - interrupts
+  - resets
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    cec@94a087c {
+        compatible = "st,stih-cec";
+        reg = <0x94a087c 0x64>;
+
+        clocks = <&clk_sysin>;
+        clock-names = "cec-clk";
+        hdmi-phandle = <&sti_hdmi>;
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "cec-irq";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_cec0_default>;
+        resets = <&softreset STIH407_LPM_SOFTRESET>;
+    };
diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt
deleted file mode 100644
index ece0832fdeaf..000000000000
--- a/Documentation/devicetree/bindings/media/stih-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-STMicroelectronics STIH4xx HDMI CEC driver
-
-Required properties:
- - compatible : value should be "st,stih-cec"
- - reg : Physical base address of the IP registers and length of memory
-	 mapped region.
- - clocks : from common clock binding: handle to HDMI CEC clock
- - interrupts : HDMI CEC interrupt number to the CPU.
- - pinctrl-names: Contains only one value - "default"
- - pinctrl-0: Specifies the pin control groups used for CEC hardware.
- - resets: Reference to a reset controller
- - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt.
-
-Example for STIH407:
-
-sti-cec@94a087c {
-	compatible = "st,stih-cec";
-	reg = <0x94a087c 0x64>;
-	clocks = <&clk_sysin>;
-	clock-names = "cec-clk";
-	interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
-	interrupt-names = "cec-irq";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cec0_default>;
-	resets = <&softreset STIH407_LPM_SOFTRESET>;
-	hdmi-phandle = <&hdmi>;
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index dee3f776be32..5bf8879b4a59 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19924,7 +19924,7 @@ F:	sound/soc/sti/
 STI CEC DRIVER
 M:	Alain Volmat <alain.volmat@foss.st.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/stih-cec.txt
+F:	Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
 F:	drivers/media/cec/platform/sti/
 
 STK1160 USB VIDEO CAPTURE DRIVER
-- 
2.34.1

[PATCH 9/9] media: dt-bindings: st,stih-cec: convert to DT schema

[Krzysztof Kozlowski]

Convert ST STIH4xx HDMI CEC bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/st,stih-cec.yaml       | 66 +++++++++++++++++++
 .../devicetree/bindings/media/stih-cec.txt    | 27 --------
 MAINTAINERS                                   |  2 +-
 3 files changed, 67 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/stih-cec.txt

diff --git a/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
new file mode 100644
index 000000000000..aeddf16ed339
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/st,stih-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STIH4xx HDMI CEC
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: st,stih-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec-clk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: cec-irq
+
+  resets:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - hdmi-phandle
+  - interrupts
+  - resets
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    cec@94a087c {
+        compatible = "st,stih-cec";
+        reg = <0x94a087c 0x64>;
+
+        clocks = <&clk_sysin>;
+        clock-names = "cec-clk";
+        hdmi-phandle = <&sti_hdmi>;
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "cec-irq";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_cec0_default>;
+        resets = <&softreset STIH407_LPM_SOFTRESET>;
+    };
diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt
deleted file mode 100644
index ece0832fdeaf..000000000000
--- a/Documentation/devicetree/bindings/media/stih-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-STMicroelectronics STIH4xx HDMI CEC driver
-
-Required properties:
- - compatible : value should be "st,stih-cec"
- - reg : Physical base address of the IP registers and length of memory
-	 mapped region.
- - clocks : from common clock binding: handle to HDMI CEC clock
- - interrupts : HDMI CEC interrupt number to the CPU.
- - pinctrl-names: Contains only one value - "default"
- - pinctrl-0: Specifies the pin control groups used for CEC hardware.
- - resets: Reference to a reset controller
- - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt.
-
-Example for STIH407:
-
-sti-cec@94a087c {
-	compatible = "st,stih-cec";
-	reg = <0x94a087c 0x64>;
-	clocks = <&clk_sysin>;
-	clock-names = "cec-clk";
-	interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
-	interrupt-names = "cec-irq";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cec0_default>;
-	resets = <&softreset STIH407_LPM_SOFTRESET>;
-	hdmi-phandle = <&hdmi>;
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index dee3f776be32..5bf8879b4a59 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19924,7 +19924,7 @@ F:	sound/soc/sti/
 STI CEC DRIVER
 M:	Alain Volmat <alain.volmat@foss.st.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/stih-cec.txt
+F:	Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
 F:	drivers/media/cec/platform/sti/
 
 STK1160 USB VIDEO CAPTURE DRIVER
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 9/9] media: dt-bindings: st,stih-cec: convert to DT schema

[Krzysztof Kozlowski]

Convert ST STIH4xx HDMI CEC bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/media/cec/st,stih-cec.yaml       | 66 +++++++++++++++++++
 .../devicetree/bindings/media/stih-cec.txt    | 27 --------
 MAINTAINERS                                   |  2 +-
 3 files changed, 67 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/stih-cec.txt

diff --git a/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
new file mode 100644
index 000000000000..aeddf16ed339
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/st,stih-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STIH4xx HDMI CEC
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: st,stih-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec-clk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: cec-irq
+
+  resets:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - hdmi-phandle
+  - interrupts
+  - resets
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    cec@94a087c {
+        compatible = "st,stih-cec";
+        reg = <0x94a087c 0x64>;
+
+        clocks = <&clk_sysin>;
+        clock-names = "cec-clk";
+        hdmi-phandle = <&sti_hdmi>;
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "cec-irq";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_cec0_default>;
+        resets = <&softreset STIH407_LPM_SOFTRESET>;
+    };
diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt
deleted file mode 100644
index ece0832fdeaf..000000000000
--- a/Documentation/devicetree/bindings/media/stih-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-STMicroelectronics STIH4xx HDMI CEC driver
-
-Required properties:
- - compatible : value should be "st,stih-cec"
- - reg : Physical base address of the IP registers and length of memory
-	 mapped region.
- - clocks : from common clock binding: handle to HDMI CEC clock
- - interrupts : HDMI CEC interrupt number to the CPU.
- - pinctrl-names: Contains only one value - "default"
- - pinctrl-0: Specifies the pin control groups used for CEC hardware.
- - resets: Reference to a reset controller
- - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt.
-
-Example for STIH407:
-
-sti-cec@94a087c {
-	compatible = "st,stih-cec";
-	reg = <0x94a087c 0x64>;
-	clocks = <&clk_sysin>;
-	clock-names = "cec-clk";
-	interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
-	interrupt-names = "cec-irq";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cec0_default>;
-	resets = <&softreset STIH407_LPM_SOFTRESET>;
-	hdmi-phandle = <&hdmi>;
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index dee3f776be32..5bf8879b4a59 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19924,7 +19924,7 @@ F:	sound/soc/sti/
 STI CEC DRIVER
 M:	Alain Volmat <alain.volmat@foss.st.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/stih-cec.txt
+F:	Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
 F:	drivers/media/cec/platform/sti/
 
 STK1160 USB VIDEO CAPTURE DRIVER
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/9] media: dt-bindings: cec: convert common CEC properties to DT schema

[Hans Verkuil]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Convert common HDMI CEC adapter bindings to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thanks!

	Hans

> ---
>  .../devicetree/bindings/media/cec.txt         |  8 ------
>  .../bindings/media/cec/cec-common.yaml        | 28 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 29 insertions(+), 9 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/cec.txt
>  create mode 100644 Documentation/devicetree/bindings/media/cec/cec-common.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt
> deleted file mode 100644
> index 22d7aae3d3d7..000000000000
> --- a/Documentation/devicetree/bindings/media/cec.txt
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -Common bindings for HDMI CEC adapters
> -
> -- hdmi-phandle: phandle to the HDMI controller.
> -
> -- needs-hpd: if present the CEC support is only available when the HPD
> -  is high. Some boards only let the CEC pin through if the HPD is high,
> -  for example if there is a level converter that uses the HPD to power
> -  up or down.
> diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
> new file mode 100644
> index 000000000000..af6ee5f1c73f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
> @@ -0,0 +1,28 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cec/cec-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HDMI CEC Adapters Common Properties
> +
> +maintainers:
> +  - Hans Verkuil <hverkuil@xs4all.nl>
> +
> +properties:
> +  $nodename:
> +    pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$"
> +
> +  hdmi-phandle:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the HDMI controller.
> +
> +  needs-hpd:
> +    type: boolean
> +    description:
> +      The CEC support is only available when the HPD is high. Some boards only
> +      let the CEC pin through if the HPD is high, for example if there is a
> +      level converter that uses the HPD to power up or down.
> +
> +additionalProperties: true
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 07cb85cac4c3..45402e03cda5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4832,7 +4832,7 @@ S:	Supported
>  W:	http://linuxtv.org
>  T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/ABI/testing/debugfs-cec-error-inj
> -F:	Documentation/devicetree/bindings/media/cec.txt
> +F:	Documentation/devicetree/bindings/media/cec/cec-common.yaml
>  F:	Documentation/driver-api/media/cec-core.rst
>  F:	Documentation/userspace-api/media/cec
>  F:	drivers/media/cec/

Re: [PATCH 3/9] media: dt-bindings: cec: convert common CEC properties to DT schema

[Hans Verkuil]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Convert common HDMI CEC adapter bindings to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thanks!

	Hans

> ---
>  .../devicetree/bindings/media/cec.txt         |  8 ------
>  .../bindings/media/cec/cec-common.yaml        | 28 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 29 insertions(+), 9 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/cec.txt
>  create mode 100644 Documentation/devicetree/bindings/media/cec/cec-common.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt
> deleted file mode 100644
> index 22d7aae3d3d7..000000000000
> --- a/Documentation/devicetree/bindings/media/cec.txt
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -Common bindings for HDMI CEC adapters
> -
> -- hdmi-phandle: phandle to the HDMI controller.
> -
> -- needs-hpd: if present the CEC support is only available when the HPD
> -  is high. Some boards only let the CEC pin through if the HPD is high,
> -  for example if there is a level converter that uses the HPD to power
> -  up or down.
> diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
> new file mode 100644
> index 000000000000..af6ee5f1c73f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
> @@ -0,0 +1,28 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cec/cec-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HDMI CEC Adapters Common Properties
> +
> +maintainers:
> +  - Hans Verkuil <hverkuil@xs4all.nl>
> +
> +properties:
> +  $nodename:
> +    pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$"
> +
> +  hdmi-phandle:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the HDMI controller.
> +
> +  needs-hpd:
> +    type: boolean
> +    description:
> +      The CEC support is only available when the HPD is high. Some boards only
> +      let the CEC pin through if the HPD is high, for example if there is a
> +      level converter that uses the HPD to power up or down.
> +
> +additionalProperties: true
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 07cb85cac4c3..45402e03cda5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4832,7 +4832,7 @@ S:	Supported
>  W:	http://linuxtv.org
>  T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/ABI/testing/debugfs-cec-error-inj
> -F:	Documentation/devicetree/bindings/media/cec.txt
> +F:	Documentation/devicetree/bindings/media/cec/cec-common.yaml
>  F:	Documentation/driver-api/media/cec-core.rst
>  F:	Documentation/userspace-api/media/cec
>  F:	drivers/media/cec/


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 3/9] media: dt-bindings: cec: convert common CEC properties to DT schema

[Hans Verkuil]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Convert common HDMI CEC adapter bindings to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thanks!

	Hans

> ---
>  .../devicetree/bindings/media/cec.txt         |  8 ------
>  .../bindings/media/cec/cec-common.yaml        | 28 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 29 insertions(+), 9 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/cec.txt
>  create mode 100644 Documentation/devicetree/bindings/media/cec/cec-common.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt
> deleted file mode 100644
> index 22d7aae3d3d7..000000000000
> --- a/Documentation/devicetree/bindings/media/cec.txt
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -Common bindings for HDMI CEC adapters
> -
> -- hdmi-phandle: phandle to the HDMI controller.
> -
> -- needs-hpd: if present the CEC support is only available when the HPD
> -  is high. Some boards only let the CEC pin through if the HPD is high,
> -  for example if there is a level converter that uses the HPD to power
> -  up or down.
> diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
> new file mode 100644
> index 000000000000..af6ee5f1c73f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
> @@ -0,0 +1,28 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cec/cec-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HDMI CEC Adapters Common Properties
> +
> +maintainers:
> +  - Hans Verkuil <hverkuil@xs4all.nl>
> +
> +properties:
> +  $nodename:
> +    pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$"
> +
> +  hdmi-phandle:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the HDMI controller.
> +
> +  needs-hpd:
> +    type: boolean
> +    description:
> +      The CEC support is only available when the HPD is high. Some boards only
> +      let the CEC pin through if the HPD is high, for example if there is a
> +      level converter that uses the HPD to power up or down.
> +
> +additionalProperties: true
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 07cb85cac4c3..45402e03cda5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4832,7 +4832,7 @@ S:	Supported
>  W:	http://linuxtv.org
>  T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/ABI/testing/debugfs-cec-error-inj
> -F:	Documentation/devicetree/bindings/media/cec.txt
> +F:	Documentation/devicetree/bindings/media/cec/cec-common.yaml
>  F:	Documentation/driver-api/media/cec-core.rst
>  F:	Documentation/userspace-api/media/cec
>  F:	drivers/media/cec/


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 7/9] media: dt-bindings: cec-gpio: convert to DT schema

[Hans Verkuil]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Convert HDMI CEC GPIO bindings to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thanks!

	Hans

> ---
>  .../devicetree/bindings/media/cec-gpio.txt    | 42 -----------
>  .../bindings/media/cec/cec-gpio.yaml          | 73 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 74 insertions(+), 43 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/cec-gpio.txt
>  create mode 100644 Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
> deleted file mode 100644
> index 47e8d73d32a3..000000000000
> --- a/Documentation/devicetree/bindings/media/cec-gpio.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -* HDMI CEC GPIO driver
> -
> -The HDMI CEC GPIO module supports CEC implementations where the CEC line
> -is hooked up to a pull-up GPIO line and - optionally - the HPD line is
> -hooked up to another GPIO line.
> -
> -Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and
> -5V lines it is 5.3V. So you may need some sort of level conversion circuitry
> -when connecting them to a GPIO line.
> -
> -Required properties:
> -  - compatible: value must be "cec-gpio".
> -  - cec-gpios: gpio that the CEC line is connected to. The line should be
> -    tagged as open drain.
> -
> -If the CEC line is associated with an HDMI receiver/transmitter, then the
> -following property is also required:
> -
> -  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
> -
> -If the CEC line is not associated with an HDMI receiver/transmitter, then
> -the following property is optional and can be used for debugging HPD changes:
> -
> -  - hpd-gpios: gpio that the HPD line is connected to.
> -
> -This property is optional and can be used for debugging changes on the 5V line:
> -
> -  - v5-gpios: gpio that the 5V line is connected to.
> -
> -Example for the Raspberry Pi 3 where the CEC line is connected to
> -pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is
> -connected to pin 11 aka BCM17 and the 5V line is connected to pin
> -15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!):
> -
> -#include <dt-bindings/gpio/gpio.h>
> -
> -cec-gpio {
> -	compatible = "cec-gpio";
> -	cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> -	hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
> -	v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> -};
> diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
> new file mode 100644
> index 000000000000..19169d58316a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
> @@ -0,0 +1,73 @@
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HDMI CEC GPIO
> +
> +maintainers:
> +  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
> +
> +description: |
> +  The HDMI CEC GPIO module supports CEC implementations where the CEC line is
> +  hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
> +  to another GPIO line.
> +
> +  Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
> +  5V lines it is 5.3V. So you may need some sort of level conversion
> +  circuitry when connecting them to a GPIO line.
> +
> +properties:
> +  compatible:
> +    const: cec-gpio
> +
> +  cec-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO that the CEC line is connected to. The line should be tagged as open
> +      drain.
> +
> +  hpd-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO that the HPD line is connected to.  Used for debugging HPD changes
> +      when the CEC line is not associated with an HDMI receiver/transmitter.
> +
> +  v5-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO that the 5V line is connected to.  Used for debugging changes on the
> +      5V line.
> +
> +required:
> +  - compatible
> +  - cec-gpios
> +
> +allOf:
> +  - $ref: cec-common.yaml#
> +  - if:
> +      required:
> +        - hdmi-phandle
> +    then:
> +      properties:
> +        hpd-gpios: false
> +
> +  - if:
> +      required:
> +        - hpd-gpios
> +    then:
> +      properties:
> +        hdmi-phandle: false
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    cec {
> +        compatible = "cec-gpio";
> +        cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> +        hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
> +        v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 05acbaecef52..197351d3bb57 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4848,7 +4848,7 @@ L:	linux-media@vger.kernel.org
>  S:	Supported
>  W:	http://linuxtv.org
>  T:	git git://linuxtv.org/media_tree.git
> -F:	Documentation/devicetree/bindings/media/cec-gpio.txt
> +F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
>  F:	drivers/media/cec/platform/cec-gpio/
>  
>  CELL BROADBAND ENGINE ARCHITECTURE

Re: [PATCH 7/9] media: dt-bindings: cec-gpio: convert to DT schema

[Hans Verkuil]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Convert HDMI CEC GPIO bindings to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thanks!

	Hans

> ---
>  .../devicetree/bindings/media/cec-gpio.txt    | 42 -----------
>  .../bindings/media/cec/cec-gpio.yaml          | 73 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 74 insertions(+), 43 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/cec-gpio.txt
>  create mode 100644 Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
> deleted file mode 100644
> index 47e8d73d32a3..000000000000
> --- a/Documentation/devicetree/bindings/media/cec-gpio.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -* HDMI CEC GPIO driver
> -
> -The HDMI CEC GPIO module supports CEC implementations where the CEC line
> -is hooked up to a pull-up GPIO line and - optionally - the HPD line is
> -hooked up to another GPIO line.
> -
> -Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and
> -5V lines it is 5.3V. So you may need some sort of level conversion circuitry
> -when connecting them to a GPIO line.
> -
> -Required properties:
> -  - compatible: value must be "cec-gpio".
> -  - cec-gpios: gpio that the CEC line is connected to. The line should be
> -    tagged as open drain.
> -
> -If the CEC line is associated with an HDMI receiver/transmitter, then the
> -following property is also required:
> -
> -  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
> -
> -If the CEC line is not associated with an HDMI receiver/transmitter, then
> -the following property is optional and can be used for debugging HPD changes:
> -
> -  - hpd-gpios: gpio that the HPD line is connected to.
> -
> -This property is optional and can be used for debugging changes on the 5V line:
> -
> -  - v5-gpios: gpio that the 5V line is connected to.
> -
> -Example for the Raspberry Pi 3 where the CEC line is connected to
> -pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is
> -connected to pin 11 aka BCM17 and the 5V line is connected to pin
> -15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!):
> -
> -#include <dt-bindings/gpio/gpio.h>
> -
> -cec-gpio {
> -	compatible = "cec-gpio";
> -	cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> -	hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
> -	v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> -};
> diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
> new file mode 100644
> index 000000000000..19169d58316a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
> @@ -0,0 +1,73 @@
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HDMI CEC GPIO
> +
> +maintainers:
> +  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
> +
> +description: |
> +  The HDMI CEC GPIO module supports CEC implementations where the CEC line is
> +  hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
> +  to another GPIO line.
> +
> +  Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
> +  5V lines it is 5.3V. So you may need some sort of level conversion
> +  circuitry when connecting them to a GPIO line.
> +
> +properties:
> +  compatible:
> +    const: cec-gpio
> +
> +  cec-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO that the CEC line is connected to. The line should be tagged as open
> +      drain.
> +
> +  hpd-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO that the HPD line is connected to.  Used for debugging HPD changes
> +      when the CEC line is not associated with an HDMI receiver/transmitter.
> +
> +  v5-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO that the 5V line is connected to.  Used for debugging changes on the
> +      5V line.
> +
> +required:
> +  - compatible
> +  - cec-gpios
> +
> +allOf:
> +  - $ref: cec-common.yaml#
> +  - if:
> +      required:
> +        - hdmi-phandle
> +    then:
> +      properties:
> +        hpd-gpios: false
> +
> +  - if:
> +      required:
> +        - hpd-gpios
> +    then:
> +      properties:
> +        hdmi-phandle: false
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    cec {
> +        compatible = "cec-gpio";
> +        cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> +        hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
> +        v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 05acbaecef52..197351d3bb57 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4848,7 +4848,7 @@ L:	linux-media@vger.kernel.org
>  S:	Supported
>  W:	http://linuxtv.org
>  T:	git git://linuxtv.org/media_tree.git
> -F:	Documentation/devicetree/bindings/media/cec-gpio.txt
> +F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
>  F:	drivers/media/cec/platform/cec-gpio/
>  
>  CELL BROADBAND ENGINE ARCHITECTURE


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 7/9] media: dt-bindings: cec-gpio: convert to DT schema

[Hans Verkuil]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Convert HDMI CEC GPIO bindings to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thanks!

	Hans

> ---
>  .../devicetree/bindings/media/cec-gpio.txt    | 42 -----------
>  .../bindings/media/cec/cec-gpio.yaml          | 73 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 74 insertions(+), 43 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/cec-gpio.txt
>  create mode 100644 Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
> deleted file mode 100644
> index 47e8d73d32a3..000000000000
> --- a/Documentation/devicetree/bindings/media/cec-gpio.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -* HDMI CEC GPIO driver
> -
> -The HDMI CEC GPIO module supports CEC implementations where the CEC line
> -is hooked up to a pull-up GPIO line and - optionally - the HPD line is
> -hooked up to another GPIO line.
> -
> -Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and
> -5V lines it is 5.3V. So you may need some sort of level conversion circuitry
> -when connecting them to a GPIO line.
> -
> -Required properties:
> -  - compatible: value must be "cec-gpio".
> -  - cec-gpios: gpio that the CEC line is connected to. The line should be
> -    tagged as open drain.
> -
> -If the CEC line is associated with an HDMI receiver/transmitter, then the
> -following property is also required:
> -
> -  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
> -
> -If the CEC line is not associated with an HDMI receiver/transmitter, then
> -the following property is optional and can be used for debugging HPD changes:
> -
> -  - hpd-gpios: gpio that the HPD line is connected to.
> -
> -This property is optional and can be used for debugging changes on the 5V line:
> -
> -  - v5-gpios: gpio that the 5V line is connected to.
> -
> -Example for the Raspberry Pi 3 where the CEC line is connected to
> -pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is
> -connected to pin 11 aka BCM17 and the 5V line is connected to pin
> -15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!):
> -
> -#include <dt-bindings/gpio/gpio.h>
> -
> -cec-gpio {
> -	compatible = "cec-gpio";
> -	cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> -	hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
> -	v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> -};
> diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
> new file mode 100644
> index 000000000000..19169d58316a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
> @@ -0,0 +1,73 @@
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HDMI CEC GPIO
> +
> +maintainers:
> +  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
> +
> +description: |
> +  The HDMI CEC GPIO module supports CEC implementations where the CEC line is
> +  hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
> +  to another GPIO line.
> +
> +  Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
> +  5V lines it is 5.3V. So you may need some sort of level conversion
> +  circuitry when connecting them to a GPIO line.
> +
> +properties:
> +  compatible:
> +    const: cec-gpio
> +
> +  cec-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO that the CEC line is connected to. The line should be tagged as open
> +      drain.
> +
> +  hpd-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO that the HPD line is connected to.  Used for debugging HPD changes
> +      when the CEC line is not associated with an HDMI receiver/transmitter.
> +
> +  v5-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO that the 5V line is connected to.  Used for debugging changes on the
> +      5V line.
> +
> +required:
> +  - compatible
> +  - cec-gpios
> +
> +allOf:
> +  - $ref: cec-common.yaml#
> +  - if:
> +      required:
> +        - hdmi-phandle
> +    then:
> +      properties:
> +        hpd-gpios: false
> +
> +  - if:
> +      required:
> +        - hpd-gpios
> +    then:
> +      properties:
> +        hdmi-phandle: false
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    cec {
> +        compatible = "cec-gpio";
> +        cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> +        hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
> +        v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 05acbaecef52..197351d3bb57 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4848,7 +4848,7 @@ L:	linux-media@vger.kernel.org
>  S:	Supported
>  W:	http://linuxtv.org
>  T:	git git://linuxtv.org/media_tree.git
> -F:	Documentation/devicetree/bindings/media/cec-gpio.txt
> +F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
>  F:	drivers/media/cec/platform/cec-gpio/
>  
>  CELL BROADBAND ENGINE ARCHITECTURE


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 8/9] media: dt-bindings: nvidia,tegra-cec: convert to DT schema

[Hans Verkuil]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Convert Nvidia Tegra HDMI CEC bindings to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thanks!

	Hans

> ---
>  .../bindings/media/cec/nvidia,tegra-cec.yaml  | 58 +++++++++++++++++++
>  .../devicetree/bindings/media/tegra-cec.txt   | 27 ---------
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 59 insertions(+), 28 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
>  delete mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
> new file mode 100644
> index 000000000000..9a4025ff7fad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cec/nvidia,tegra-cec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nvidia Tegra HDMI CEC
> +
> +maintainers:
> +  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
> +
> +allOf:
> +  - $ref: cec-common.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nvidia,tegra114-cec
> +      - nvidia,tegra124-cec
> +      - nvidia,tegra210-cec
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: cec
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - hdmi-phandle
> +  - interrupts
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/tegra124-car.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    cec@70015000 {
> +        compatible = "nvidia,tegra124-cec";
> +        reg = <0x70015000 0x00001000>;
> +        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&tegra_car TEGRA124_CLK_CEC>;
> +        clock-names = "cec";
> +        status = "disabled";
> +        hdmi-phandle = <&hdmi>;
> +    };
> diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
> deleted file mode 100644
> index c503f06f3b84..000000000000
> --- a/Documentation/devicetree/bindings/media/tegra-cec.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -* Tegra HDMI CEC hardware
> -
> -The HDMI CEC module is present in Tegra SoCs and its purpose is to
> -handle communication between HDMI connected devices over the CEC bus.
> -
> -Required properties:
> -  - compatible : value should be one of the following:
> -	"nvidia,tegra114-cec"
> -	"nvidia,tegra124-cec"
> -	"nvidia,tegra210-cec"
> -  - reg : Physical base address of the IP registers and length of memory
> -	  mapped region.
> -  - interrupts : HDMI CEC interrupt number to the CPU.
> -  - clocks : from common clock binding: handle to HDMI CEC clock.
> -  - clock-names : from common clock binding: must contain "cec",
> -		  corresponding to the entry in the clocks property.
> -  - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
> -
> -Example:
> -
> -cec@70015000 {
> -	compatible = "nvidia,tegra124-cec";
> -	reg = <0x0 0x70015000 0x0 0x00001000>;
> -	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> -	clocks = <&tegra_car TEGRA124_CLK_CEC>;
> -	clock-names = "cec";
> -};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 197351d3bb57..dee3f776be32 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2999,7 +2999,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
>  L:	linux-tegra@vger.kernel.org
>  L:	linux-media@vger.kernel.org
>  S:	Maintained
> -F:	Documentation/devicetree/bindings/media/tegra-cec.txt
> +F:	Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
>  F:	drivers/media/cec/platform/tegra/
>  
>  ARM/TESLA FSD SoC SUPPORT

Re: [PATCH 8/9] media: dt-bindings: nvidia,tegra-cec: convert to DT schema

[Hans Verkuil]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Convert Nvidia Tegra HDMI CEC bindings to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thanks!

	Hans

> ---
>  .../bindings/media/cec/nvidia,tegra-cec.yaml  | 58 +++++++++++++++++++
>  .../devicetree/bindings/media/tegra-cec.txt   | 27 ---------
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 59 insertions(+), 28 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
>  delete mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
> new file mode 100644
> index 000000000000..9a4025ff7fad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cec/nvidia,tegra-cec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nvidia Tegra HDMI CEC
> +
> +maintainers:
> +  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
> +
> +allOf:
> +  - $ref: cec-common.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nvidia,tegra114-cec
> +      - nvidia,tegra124-cec
> +      - nvidia,tegra210-cec
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: cec
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - hdmi-phandle
> +  - interrupts
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/tegra124-car.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    cec@70015000 {
> +        compatible = "nvidia,tegra124-cec";
> +        reg = <0x70015000 0x00001000>;
> +        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&tegra_car TEGRA124_CLK_CEC>;
> +        clock-names = "cec";
> +        status = "disabled";
> +        hdmi-phandle = <&hdmi>;
> +    };
> diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
> deleted file mode 100644
> index c503f06f3b84..000000000000
> --- a/Documentation/devicetree/bindings/media/tegra-cec.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -* Tegra HDMI CEC hardware
> -
> -The HDMI CEC module is present in Tegra SoCs and its purpose is to
> -handle communication between HDMI connected devices over the CEC bus.
> -
> -Required properties:
> -  - compatible : value should be one of the following:
> -	"nvidia,tegra114-cec"
> -	"nvidia,tegra124-cec"
> -	"nvidia,tegra210-cec"
> -  - reg : Physical base address of the IP registers and length of memory
> -	  mapped region.
> -  - interrupts : HDMI CEC interrupt number to the CPU.
> -  - clocks : from common clock binding: handle to HDMI CEC clock.
> -  - clock-names : from common clock binding: must contain "cec",
> -		  corresponding to the entry in the clocks property.
> -  - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
> -
> -Example:
> -
> -cec@70015000 {
> -	compatible = "nvidia,tegra124-cec";
> -	reg = <0x0 0x70015000 0x0 0x00001000>;
> -	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> -	clocks = <&tegra_car TEGRA124_CLK_CEC>;
> -	clock-names = "cec";
> -};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 197351d3bb57..dee3f776be32 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2999,7 +2999,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
>  L:	linux-tegra@vger.kernel.org
>  L:	linux-media@vger.kernel.org
>  S:	Maintained
> -F:	Documentation/devicetree/bindings/media/tegra-cec.txt
> +F:	Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
>  F:	drivers/media/cec/platform/tegra/
>  
>  ARM/TESLA FSD SoC SUPPORT


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 8/9] media: dt-bindings: nvidia,tegra-cec: convert to DT schema

[Hans Verkuil]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Convert Nvidia Tegra HDMI CEC bindings to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thanks!

	Hans

> ---
>  .../bindings/media/cec/nvidia,tegra-cec.yaml  | 58 +++++++++++++++++++
>  .../devicetree/bindings/media/tegra-cec.txt   | 27 ---------
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 59 insertions(+), 28 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
>  delete mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
> new file mode 100644
> index 000000000000..9a4025ff7fad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cec/nvidia,tegra-cec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nvidia Tegra HDMI CEC
> +
> +maintainers:
> +  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
> +
> +allOf:
> +  - $ref: cec-common.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nvidia,tegra114-cec
> +      - nvidia,tegra124-cec
> +      - nvidia,tegra210-cec
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: cec
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - hdmi-phandle
> +  - interrupts
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/tegra124-car.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    cec@70015000 {
> +        compatible = "nvidia,tegra124-cec";
> +        reg = <0x70015000 0x00001000>;
> +        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&tegra_car TEGRA124_CLK_CEC>;
> +        clock-names = "cec";
> +        status = "disabled";
> +        hdmi-phandle = <&hdmi>;
> +    };
> diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
> deleted file mode 100644
> index c503f06f3b84..000000000000
> --- a/Documentation/devicetree/bindings/media/tegra-cec.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -* Tegra HDMI CEC hardware
> -
> -The HDMI CEC module is present in Tegra SoCs and its purpose is to
> -handle communication between HDMI connected devices over the CEC bus.
> -
> -Required properties:
> -  - compatible : value should be one of the following:
> -	"nvidia,tegra114-cec"
> -	"nvidia,tegra124-cec"
> -	"nvidia,tegra210-cec"
> -  - reg : Physical base address of the IP registers and length of memory
> -	  mapped region.
> -  - interrupts : HDMI CEC interrupt number to the CPU.
> -  - clocks : from common clock binding: handle to HDMI CEC clock.
> -  - clock-names : from common clock binding: must contain "cec",
> -		  corresponding to the entry in the clocks property.
> -  - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
> -
> -Example:
> -
> -cec@70015000 {
> -	compatible = "nvidia,tegra124-cec";
> -	reg = <0x0 0x70015000 0x0 0x00001000>;
> -	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> -	clocks = <&tegra_car TEGRA124_CLK_CEC>;
> -	clock-names = "cec";
> -};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 197351d3bb57..dee3f776be32 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2999,7 +2999,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
>  L:	linux-tegra@vger.kernel.org
>  L:	linux-media@vger.kernel.org
>  S:	Maintained
> -F:	Documentation/devicetree/bindings/media/tegra-cec.txt
> +F:	Documentation/devicetree/bindings/media/cec/nvidia,tegra-cec.yaml
>  F:	drivers/media/cec/platform/tegra/
>  
>  ARM/TESLA FSD SoC SUPPORT


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 1/9] media: dt-bindings: amlogic,meson-gx-ao-cec: move to cec subfolder

[Neil Armstrong]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop
> unneeded quotes.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml     | 4 ++--
>   MAINTAINERS                                                   | 2 +-
>   2 files changed, 3 insertions(+), 3 deletions(-)
>   rename Documentation/devicetree/bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml (93%)

<snip>


Acked-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH 1/9] media: dt-bindings: amlogic,meson-gx-ao-cec: move to cec subfolder

[Neil Armstrong]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop
> unneeded quotes.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml     | 4 ++--
>   MAINTAINERS                                                   | 2 +-
>   2 files changed, 3 insertions(+), 3 deletions(-)
>   rename Documentation/devicetree/bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml (93%)

<snip>


Acked-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 1/9] media: dt-bindings: amlogic,meson-gx-ao-cec: move to cec subfolder

[Neil Armstrong]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop
> unneeded quotes.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml     | 4 ++--
>   MAINTAINERS                                                   | 2 +-
>   2 files changed, 3 insertions(+), 3 deletions(-)
>   rename Documentation/devicetree/bindings/media/{ => cec}/amlogic,meson-gx-ao-cec.yaml (93%)

<snip>


Acked-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/9] media: dt-bindings: amlogic,meson-gx-ao-cec: reference common CEC properties

[Neil Armstrong]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Reference common HDMI CEC adapter properties to simplify the binding and
> have only one place of definition for common properties.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../bindings/media/cec/amlogic,meson-gx-ao-cec.yaml        | 7 ++-----
>   1 file changed, 2 insertions(+), 5 deletions(-)
> 

<snip>


Acked-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH 4/9] media: dt-bindings: amlogic,meson-gx-ao-cec: reference common CEC properties

[Neil Armstrong]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Reference common HDMI CEC adapter properties to simplify the binding and
> have only one place of definition for common properties.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../bindings/media/cec/amlogic,meson-gx-ao-cec.yaml        | 7 ++-----
>   1 file changed, 2 insertions(+), 5 deletions(-)
> 

<snip>


Acked-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/9] media: dt-bindings: amlogic,meson-gx-ao-cec: reference common CEC properties

[Neil Armstrong]

On 04/12/2022 19:29, Krzysztof Kozlowski wrote:
> Reference common HDMI CEC adapter properties to simplify the binding and
> have only one place of definition for common properties.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../bindings/media/cec/amlogic,meson-gx-ao-cec.yaml        | 7 ++-----
>   1 file changed, 2 insertions(+), 5 deletions(-)
> 

<snip>


Acked-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 5/9] media: dt-bindings: chrontel,ch7322: reference common CEC properties

[Rob Herring]

On Sun, 04 Dec 2022 19:29:04 +0100, Krzysztof Kozlowski wrote:
> Reference common HDMI CEC adapter properties to simplify the binding and
> have only one place of definition for common properties.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/media/i2c/chrontel,ch7322.yaml   | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.example.dtb: ch7322@75: $nodename:0: 'ch7322@75' does not match '^cec(@[0-9a-f]+|-[0-9]+)?$'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.example.dtb: ch7322@75: Unevaluated properties are not allowed ('hdmi-phandle' was unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221204182908.138910-5-krzysztof.kozlowski@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 5/9] media: dt-bindings: chrontel,ch7322: reference common CEC properties

[Rob Herring]

On Sun, 04 Dec 2022 19:29:04 +0100, Krzysztof Kozlowski wrote:
> Reference common HDMI CEC adapter properties to simplify the binding and
> have only one place of definition for common properties.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/media/i2c/chrontel,ch7322.yaml   | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.example.dtb: ch7322@75: $nodename:0: 'ch7322@75' does not match '^cec(@[0-9a-f]+|-[0-9]+)?$'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.example.dtb: ch7322@75: Unevaluated properties are not allowed ('hdmi-phandle' was unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221204182908.138910-5-krzysztof.kozlowski@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 5/9] media: dt-bindings: chrontel,ch7322: reference common CEC properties

[Rob Herring]

On Sun, 04 Dec 2022 19:29:04 +0100, Krzysztof Kozlowski wrote:
> Reference common HDMI CEC adapter properties to simplify the binding and
> have only one place of definition for common properties.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/media/i2c/chrontel,ch7322.yaml   | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.example.dtb: ch7322@75: $nodename:0: 'ch7322@75' does not match '^cec(@[0-9a-f]+|-[0-9]+)?$'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.example.dtb: ch7322@75: Unevaluated properties are not allowed ('hdmi-phandle' was unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221204182908.138910-5-krzysztof.kozlowski@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] media: dt-bindings: chrontel,ch7322: reference common CEC properties

[Krzysztof Kozlowski]

On 05/12/2022 16:07, Rob Herring wrote:
> 
> On Sun, 04 Dec 2022 19:29:04 +0100, Krzysztof Kozlowski wrote:
>> Reference common HDMI CEC adapter properties to simplify the binding and
>> have only one place of definition for common properties.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  .../devicetree/bindings/media/i2c/chrontel,ch7322.yaml   | 9 ++++-----
>>  1 file changed, 4 insertions(+), 5 deletions(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.example.dtb: ch7322@75: $nodename:0: 'ch7322@75' does not match 

I'll fix it.

Best regards,
Krzysztof

Re: [PATCH 5/9] media: dt-bindings: chrontel,ch7322: reference common CEC properties

[Krzysztof Kozlowski]

On 05/12/2022 16:07, Rob Herring wrote:
> 
> On Sun, 04 Dec 2022 19:29:04 +0100, Krzysztof Kozlowski wrote:
>> Reference common HDMI CEC adapter properties to simplify the binding and
>> have only one place of definition for common properties.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  .../devicetree/bindings/media/i2c/chrontel,ch7322.yaml   | 9 ++++-----
>>  1 file changed, 4 insertions(+), 5 deletions(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.example.dtb: ch7322@75: $nodename:0: 'ch7322@75' does not match 

I'll fix it.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] media: dt-bindings: chrontel,ch7322: reference common CEC properties

[Krzysztof Kozlowski]

On 05/12/2022 16:07, Rob Herring wrote:
> 
> On Sun, 04 Dec 2022 19:29:04 +0100, Krzysztof Kozlowski wrote:
>> Reference common HDMI CEC adapter properties to simplify the binding and
>> have only one place of definition for common properties.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  .../devicetree/bindings/media/i2c/chrontel,ch7322.yaml   | 9 ++++-----
>>  1 file changed, 4 insertions(+), 5 deletions(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.example.dtb: ch7322@75: $nodename:0: 'ch7322@75' does not match 

I'll fix it.

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic