* [RFC PATCH 0/5] Add new VFIO PCI driver for NVMe devices
@ 2022-12-06 5:58 Lei Rao
2022-12-06 5:58 ` [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver Lei Rao
` (4 more replies)
0 siblings, 5 replies; 71+ messages in thread
From: Lei Rao @ 2022-12-06 5:58 UTC (permalink / raw)
To: kbusch, axboe, kch, hch, sagi, alex.williamson, cohuck, jgg,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm
Cc: eddie.dong, yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan,
Lei Rao
Some devices, such as Infrastructure Processing Units (IPUs) and Data
Processing Units (DPUs), expose SR-IOV capable NVMe devices to the host.
Its VF devices support live migration via specific NVMe commands issued
through the PF's device's admin queue.
One of the problems is there are no standardized NVMe live migration
commands to make our patches spec compliant, which prevents us from
creating a spec-compliant implementation. So we've created a reference
implantation based on the Vendor-specific command fields of the protocol.
We want these commands to be standardized so that the implementation will
be spec compliant in future versions and use this RFC as a basis for the
same.
More importantly, we provide our work to help the community and start the
discussion, so everyone can participate and benefit from our work in
NVMe Live Migration implementation and help drive on standardization
efforts.
This series implements the specific vfio-pci driver to support live
migration of NVMe devices. Adds a new interface in the general
NVMe driver to receive the VF device's commands submission to the PF
device's admin queue. And also documents the details of NVMe device
live migration commands.
Any feedback and comments are greatly appreciated.
Lei Rao (5):
nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for
VF driver.
nvme-vfio: add new vfio-pci driver for NVMe device
nvme-vfio: enable the function of VFIO live migration.
nvme-vfio: check if the hardware supports live migration
nvme-vfio: Add a document for the NVMe device
drivers/nvme/host/pci.c | 18 +
drivers/vfio/pci/Kconfig | 2 +
drivers/vfio/pci/Makefile | 2 +
drivers/vfio/pci/nvme/Kconfig | 10 +
drivers/vfio/pci/nvme/Makefile | 3 +
drivers/vfio/pci/nvme/nvme.c | 636 +++++++++++++++++++++++++++++++++
drivers/vfio/pci/nvme/nvme.h | 111 ++++++
drivers/vfio/pci/nvme/nvme.txt | 278 ++++++++++++++
8 files changed, 1060 insertions(+)
create mode 100644 drivers/vfio/pci/nvme/Kconfig
create mode 100644 drivers/vfio/pci/nvme/Makefile
create mode 100644 drivers/vfio/pci/nvme/nvme.c
create mode 100644 drivers/vfio/pci/nvme/nvme.h
create mode 100644 drivers/vfio/pci/nvme/nvme.txt
--
2.34.1
^ permalink raw reply [flat|nested] 71+ messages in thread
* [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 5:58 [RFC PATCH 0/5] Add new VFIO PCI driver for NVMe devices Lei Rao
@ 2022-12-06 5:58 ` Lei Rao
2022-12-06 6:19 ` Christoph Hellwig
` (2 more replies)
2022-12-06 5:58 ` [RFC PATCH 2/5] nvme-vfio: add new vfio-pci driver for NVMe device Lei Rao
` (3 subsequent siblings)
4 siblings, 3 replies; 71+ messages in thread
From: Lei Rao @ 2022-12-06 5:58 UTC (permalink / raw)
To: kbusch, axboe, kch, hch, sagi, alex.williamson, cohuck, jgg,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm
Cc: eddie.dong, yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan,
Lei Rao
The new function nvme_submit_vf_cmd() helps the host VF driver to issue
VF admin commands. It's helpful in some cases that the host NVMe driver
does not control VF's admin queue. For example, in the virtualization
device pass-through case, the VF controller's admin queue is governed
by the Guest NVMe driver. Host VF driver relies on PF device's admin
queue to control VF devices like vendor-specific live migration commands.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Yadong Li <yadong.li@intel.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
---
drivers/nvme/host/pci.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 488ad7dabeb8..3d9c54d8e7fc 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3585,6 +3585,24 @@ static struct pci_driver nvme_driver = {
.err_handler = &nvme_err_handler,
};
+int nvme_submit_vf_cmd(struct pci_dev *dev, struct nvme_command *cmd,
+ size_t *result, void *buffer, unsigned int bufflen)
+{
+ struct nvme_dev *ndev = NULL;
+ union nvme_result res = { };
+ int ret;
+
+ ndev = pci_iov_get_pf_drvdata(dev, &nvme_driver);
+ if (IS_ERR(ndev))
+ return PTR_ERR(ndev);
+ ret = __nvme_submit_sync_cmd(ndev->ctrl.admin_q, cmd, &res, buffer, bufflen,
+ NVME_QID_ANY, 0, 0);
+ if (ret >= 0 && result)
+ *result = le32_to_cpu(res.u32);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(nvme_submit_vf_cmd);
+
static int __init nvme_init(void)
{
BUILD_BUG_ON(sizeof(struct nvme_create_cq) != 64);
--
2.34.1
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [RFC PATCH 2/5] nvme-vfio: add new vfio-pci driver for NVMe device
2022-12-06 5:58 [RFC PATCH 0/5] Add new VFIO PCI driver for NVMe devices Lei Rao
2022-12-06 5:58 ` [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver Lei Rao
@ 2022-12-06 5:58 ` Lei Rao
2022-12-06 5:58 ` [RFC PATCH 3/5] nvme-vfio: enable the function of VFIO live migration Lei Rao
` (2 subsequent siblings)
4 siblings, 0 replies; 71+ messages in thread
From: Lei Rao @ 2022-12-06 5:58 UTC (permalink / raw)
To: kbusch, axboe, kch, hch, sagi, alex.williamson, cohuck, jgg,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm
Cc: eddie.dong, yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan,
Lei Rao
NVMe device has specific live migration implementation.
Add an specific VFIO PCI driver for NVMe device. Its
live migration support will be added in the subsequent
patches.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Yadong Li <yadong.li@intel.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
---
drivers/vfio/pci/Kconfig | 2 +
drivers/vfio/pci/Makefile | 2 +
drivers/vfio/pci/nvme/Kconfig | 9 ++++
drivers/vfio/pci/nvme/Makefile | 3 ++
drivers/vfio/pci/nvme/nvme.c | 99 ++++++++++++++++++++++++++++++++++
5 files changed, 115 insertions(+)
create mode 100644 drivers/vfio/pci/nvme/Kconfig
create mode 100644 drivers/vfio/pci/nvme/Makefile
create mode 100644 drivers/vfio/pci/nvme/nvme.c
diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig
index f9d0c908e738..fcd45144d3e3 100644
--- a/drivers/vfio/pci/Kconfig
+++ b/drivers/vfio/pci/Kconfig
@@ -59,4 +59,6 @@ source "drivers/vfio/pci/mlx5/Kconfig"
source "drivers/vfio/pci/hisilicon/Kconfig"
+source "drivers/vfio/pci/nvme/Kconfig"
+
endif
diff --git a/drivers/vfio/pci/Makefile b/drivers/vfio/pci/Makefile
index 24c524224da5..eddc8e889726 100644
--- a/drivers/vfio/pci/Makefile
+++ b/drivers/vfio/pci/Makefile
@@ -11,3 +11,5 @@ obj-$(CONFIG_VFIO_PCI) += vfio-pci.o
obj-$(CONFIG_MLX5_VFIO_PCI) += mlx5/
obj-$(CONFIG_HISI_ACC_VFIO_PCI) += hisilicon/
+
+obj-$(CONFIG_NVME_VFIO_PCI) += nvme/
diff --git a/drivers/vfio/pci/nvme/Kconfig b/drivers/vfio/pci/nvme/Kconfig
new file mode 100644
index 000000000000..c281fe154007
--- /dev/null
+++ b/drivers/vfio/pci/nvme/Kconfig
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NVME_VFIO_PCI
+ tristate "VFIO support for NVMe PCI devices"
+ depends on VFIO_PCI_CORE
+ help
+ This provides generic VFIO PCI support for NVMe device
+ using the VFIO framework.
+
+ If you don't know what to do here, say N.
diff --git a/drivers/vfio/pci/nvme/Makefile b/drivers/vfio/pci/nvme/Makefile
new file mode 100644
index 000000000000..2f4a0ad3d9cf
--- /dev/null
+++ b/drivers/vfio/pci/nvme/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_NVME_VFIO_PCI) += nvme-vfio-pci.o
+nvme-vfio-pci-y := nvme.o
diff --git a/drivers/vfio/pci/nvme/nvme.c b/drivers/vfio/pci/nvme/nvme.c
new file mode 100644
index 000000000000..f1386d8a9287
--- /dev/null
+++ b/drivers/vfio/pci/nvme/nvme.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, INTEL CORPORATION. All rights reserved
+ */
+
+#include <linux/device.h>
+#include <linux/eventfd.h>
+#include <linux/file.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/vfio.h>
+#include <linux/anon_inodes.h>
+#include <linux/kernel.h>
+#include <linux/vfio_pci_core.h>
+
+static int nvmevf_pci_open_device(struct vfio_device *core_vdev)
+{
+ struct vfio_pci_core_device *vdev =
+ container_of(core_vdev, struct vfio_pci_core_device, vdev);
+ int ret;
+
+ ret = vfio_pci_core_enable(vdev);
+ if (ret)
+ return ret;
+
+ vfio_pci_core_finish_enable(vdev);
+ return 0;
+}
+
+static const struct vfio_device_ops nvmevf_pci_ops = {
+ .name = "nvme-vfio-pci",
+ .init = vfio_pci_core_init_dev,
+ .release = vfio_pci_core_release_dev,
+ .open_device = nvmevf_pci_open_device,
+ .close_device = vfio_pci_core_close_device,
+ .ioctl = vfio_pci_core_ioctl,
+ .device_feature = vfio_pci_core_ioctl_feature,
+ .read = vfio_pci_core_read,
+ .write = vfio_pci_core_write,
+ .mmap = vfio_pci_core_mmap,
+ .request = vfio_pci_core_request,
+ .match = vfio_pci_core_match,
+};
+
+static int nvmevf_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct vfio_pci_core_device *vdev;
+ int ret;
+
+ vdev = vfio_alloc_device(vfio_pci_core_device, vdev, &pdev->dev,
+ &nvmevf_pci_ops);
+ if (IS_ERR(vdev))
+ return PTR_ERR(vdev);
+
+ dev_set_drvdata(&pdev->dev, vdev);
+ ret = vfio_pci_core_register_device(vdev);
+ if (ret)
+ goto out_put_dev;
+
+ return 0;
+
+out_put_dev:
+ vfio_put_device(&vdev->vdev);
+ return ret;
+}
+
+static void nvmevf_pci_remove(struct pci_dev *pdev)
+{
+ struct vfio_pci_core_device *vdev = dev_get_drvdata(&pdev->dev);
+
+ vfio_pci_core_unregister_device(vdev);
+ vfio_put_device(&vdev->vdev);
+}
+
+static const struct pci_device_id nvmevf_pci_table[] = {
+ /* Intel IPU NVMe Virtual Function */
+ { PCI_DRIVER_OVERRIDE_DEVICE_VFIO(PCI_VENDOR_ID_INTEL, 0x1457) },
+ {}
+};
+
+MODULE_DEVICE_TABLE(pci, nvmevf_pci_table);
+
+static struct pci_driver nvmevf_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = nvmevf_pci_table,
+ .probe = nvmevf_pci_probe,
+ .remove = nvmevf_pci_remove,
+ .err_handler = &vfio_pci_core_err_handlers,
+ .driver_managed_dma = true,
+};
+
+module_pci_driver(nvmevf_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lei Rao <lei.rao@intel.com>");
+MODULE_DESCRIPTION("NVMe VFIO PCI - Generic VFIO PCI driver for NVMe");
--
2.34.1
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [RFC PATCH 3/5] nvme-vfio: enable the function of VFIO live migration.
2022-12-06 5:58 [RFC PATCH 0/5] Add new VFIO PCI driver for NVMe devices Lei Rao
2022-12-06 5:58 ` [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver Lei Rao
2022-12-06 5:58 ` [RFC PATCH 2/5] nvme-vfio: add new vfio-pci driver for NVMe device Lei Rao
@ 2022-12-06 5:58 ` Lei Rao
2023-01-19 10:21 ` Max Gurtovoy
2022-12-06 5:58 ` [RFC PATCH 4/5] nvme-vfio: check if the hardware supports " Lei Rao
2022-12-06 5:58 ` [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device Lei Rao
4 siblings, 1 reply; 71+ messages in thread
From: Lei Rao @ 2022-12-06 5:58 UTC (permalink / raw)
To: kbusch, axboe, kch, hch, sagi, alex.williamson, cohuck, jgg,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm
Cc: eddie.dong, yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan,
Lei Rao
Implement specific VFIO live migration operations for NVMe devices.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Yadong Li <yadong.li@intel.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
---
drivers/vfio/pci/nvme/Kconfig | 5 +-
drivers/vfio/pci/nvme/nvme.c | 543 ++++++++++++++++++++++++++++++++--
drivers/vfio/pci/nvme/nvme.h | 111 +++++++
3 files changed, 637 insertions(+), 22 deletions(-)
create mode 100644 drivers/vfio/pci/nvme/nvme.h
diff --git a/drivers/vfio/pci/nvme/Kconfig b/drivers/vfio/pci/nvme/Kconfig
index c281fe154007..12e0eaba0de1 100644
--- a/drivers/vfio/pci/nvme/Kconfig
+++ b/drivers/vfio/pci/nvme/Kconfig
@@ -1,9 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
config NVME_VFIO_PCI
tristate "VFIO support for NVMe PCI devices"
+ depends on NVME_CORE
depends on VFIO_PCI_CORE
help
- This provides generic VFIO PCI support for NVMe device
- using the VFIO framework.
+ This provides migration support for NVMe devices using the
+ VFIO framework.
If you don't know what to do here, say N.
diff --git a/drivers/vfio/pci/nvme/nvme.c b/drivers/vfio/pci/nvme/nvme.c
index f1386d8a9287..698e470a4e53 100644
--- a/drivers/vfio/pci/nvme/nvme.c
+++ b/drivers/vfio/pci/nvme/nvme.c
@@ -13,29 +13,503 @@
#include <linux/types.h>
#include <linux/vfio.h>
#include <linux/anon_inodes.h>
-#include <linux/kernel.h>
-#include <linux/vfio_pci_core.h>
+
+#include "nvme.h"
+
+#define MAX_MIGRATION_SIZE (256 * 1024)
+
+static int nvmevf_cmd_suspend_device(struct nvmevf_pci_core_device *nvmevf_dev)
+{
+ struct pci_dev *dev = nvmevf_dev->core_device.pdev;
+ struct nvme_live_mig_command c = { };
+ int ret;
+
+ c.suspend.opcode = nvme_admin_live_mig_suspend;
+ c.suspend.vf_index = nvmevf_dev->vf_id;
+
+ ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL, NULL, 0);
+ if (ret) {
+ dev_warn(&dev->dev, "Suspend virtual function failed (ret=0x%x)\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int nvmevf_cmd_resume_device(struct nvmevf_pci_core_device *nvmevf_dev)
+{
+ struct pci_dev *dev = nvmevf_dev->core_device.pdev;
+ struct nvme_live_mig_command c = { };
+ int ret;
+
+ c.resume.opcode = nvme_admin_live_mig_resume;
+ c.resume.vf_index = nvmevf_dev->vf_id;
+
+ ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL, NULL, 0);
+ if (ret) {
+ dev_warn(&dev->dev, "Resume virtual function failed (ret=0x%x)\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int nvmevf_cmd_query_data_size(struct nvmevf_pci_core_device *nvmevf_dev,
+ size_t *state_size)
+{
+ struct pci_dev *dev = nvmevf_dev->core_device.pdev;
+ struct nvme_live_mig_command c = { };
+ size_t result;
+ int ret;
+
+ c.query.opcode = nvme_admin_live_mig_query_data_size;
+ c.query.vf_index = nvmevf_dev->vf_id;
+
+ ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, &result, NULL, 0);
+ if (ret) {
+ dev_warn(&dev->dev, "Query the states size failed (ret=0x%x)\n", ret);
+ *state_size = 0;
+ return ret;
+ }
+ *state_size = result;
+ return 0;
+}
+
+static int nvmevf_cmd_save_data(struct nvmevf_pci_core_device *nvmevf_dev,
+ void *buffer, size_t buffer_len)
+{
+ struct pci_dev *dev = nvmevf_dev->core_device.pdev;
+ struct nvme_live_mig_command c = { };
+ int ret;
+
+ c.save.opcode = nvme_admin_live_mig_save_data;
+ c.save.vf_index = nvmevf_dev->vf_id;
+
+ ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL, buffer, buffer_len);
+ if (ret) {
+ dev_warn(&dev->dev, "Save the device states failed (ret=0x%x)\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int nvmevf_cmd_load_data(struct nvmevf_pci_core_device *nvmevf_dev,
+ struct nvmevf_migration_file *migf)
+{
+ struct pci_dev *dev = nvmevf_dev->core_device.pdev;
+ struct nvme_live_mig_command c = { };
+ int ret;
+
+ c.load.opcode = nvme_admin_live_mig_load_data;
+ c.load.vf_index = nvmevf_dev->vf_id;
+ c.load.size = migf->total_length;
+
+ ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL,
+ migf->vf_data, migf->total_length);
+ if (ret) {
+ dev_warn(&dev->dev, "Load the device states failed (ret=0x%x)\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static struct nvmevf_pci_core_device *nvmevf_drvdata(struct pci_dev *pdev)
+{
+ struct vfio_pci_core_device *core_device = dev_get_drvdata(&pdev->dev);
+
+ return container_of(core_device, struct nvmevf_pci_core_device, core_device);
+}
+
+static void nvmevf_disable_fd(struct nvmevf_migration_file *migf)
+{
+ mutex_lock(&migf->lock);
+
+ /* release the device states buffer */
+ kvfree(migf->vf_data);
+ migf->vf_data = NULL;
+ migf->disabled = true;
+ migf->total_length = 0;
+ migf->filp->f_pos = 0;
+ mutex_unlock(&migf->lock);
+}
+
+static int nvmevf_release_file(struct inode *inode, struct file *filp)
+{
+ struct nvmevf_migration_file *migf = filp->private_data;
+
+ nvmevf_disable_fd(migf);
+ mutex_destroy(&migf->lock);
+ kfree(migf);
+ return 0;
+}
+
+static ssize_t nvmevf_save_read(struct file *filp, char __user *buf, size_t len, loff_t *pos)
+{
+ struct nvmevf_migration_file *migf = filp->private_data;
+ ssize_t done = 0;
+ int ret;
+
+ if (pos)
+ return -ESPIPE;
+ pos = &filp->f_pos;
+
+ mutex_lock(&migf->lock);
+ if (*pos > migf->total_length) {
+ done = -EINVAL;
+ goto out_unlock;
+ }
+
+ if (migf->disabled) {
+ done = -EINVAL;
+ goto out_unlock;
+ }
+
+ len = min_t(size_t, migf->total_length - *pos, len);
+ if (len) {
+ ret = copy_to_user(buf, migf->vf_data + *pos, len);
+ if (ret) {
+ done = -EFAULT;
+ goto out_unlock;
+ }
+ *pos += len;
+ done = len;
+ }
+
+out_unlock:
+ mutex_unlock(&migf->lock);
+ return done;
+}
+
+static const struct file_operations nvmevf_save_fops = {
+ .owner = THIS_MODULE,
+ .read = nvmevf_save_read,
+ .release = nvmevf_release_file,
+ .llseek = no_llseek,
+};
+
+static ssize_t nvmevf_resume_write(struct file *filp, const char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct nvmevf_migration_file *migf = filp->private_data;
+ loff_t requested_length;
+ ssize_t done = 0;
+ int ret;
+
+ if (pos)
+ return -ESPIPE;
+ pos = &filp->f_pos;
+
+ if (*pos < 0 || check_add_overflow((loff_t)len, *pos, &requested_length))
+ return -EINVAL;
+
+ if (requested_length > MAX_MIGRATION_SIZE)
+ return -ENOMEM;
+ mutex_lock(&migf->lock);
+ if (migf->disabled) {
+ done = -ENODEV;
+ goto out_unlock;
+ }
+
+ ret = copy_from_user(migf->vf_data + *pos, buf, len);
+ if (ret) {
+ done = -EFAULT;
+ goto out_unlock;
+ }
+ *pos += len;
+ done = len;
+ migf->total_length += len;
+
+out_unlock:
+ mutex_unlock(&migf->lock);
+ return done;
+}
+
+static const struct file_operations nvmevf_resume_fops = {
+ .owner = THIS_MODULE,
+ .write = nvmevf_resume_write,
+ .release = nvmevf_release_file,
+ .llseek = no_llseek,
+};
+
+static void nvmevf_disable_fds(struct nvmevf_pci_core_device *nvmevf_dev)
+{
+ if (nvmevf_dev->resuming_migf) {
+ nvmevf_disable_fd(nvmevf_dev->resuming_migf);
+ fput(nvmevf_dev->resuming_migf->filp);
+ nvmevf_dev->resuming_migf = NULL;
+ }
+
+ if (nvmevf_dev->saving_migf) {
+ nvmevf_disable_fd(nvmevf_dev->saving_migf);
+ fput(nvmevf_dev->saving_migf->filp);
+ nvmevf_dev->saving_migf = NULL;
+ }
+}
+
+static struct nvmevf_migration_file *
+nvmevf_pci_resume_device_data(struct nvmevf_pci_core_device *nvmevf_dev)
+{
+ struct nvmevf_migration_file *migf;
+ int ret;
+
+ migf = kzalloc(sizeof(*migf), GFP_KERNEL);
+ if (!migf)
+ return ERR_PTR(-ENOMEM);
+
+ migf->filp = anon_inode_getfile("nvmevf_mig", &nvmevf_resume_fops, migf,
+ O_WRONLY);
+ if (IS_ERR(migf->filp)) {
+ int err = PTR_ERR(migf->filp);
+
+ kfree(migf);
+ return ERR_PTR(err);
+ }
+ stream_open(migf->filp->f_inode, migf->filp);
+ mutex_init(&migf->lock);
+
+ /* Allocate buffer to load the device states and the max states is 256K */
+ migf->vf_data = kvzalloc(MAX_MIGRATION_SIZE, GFP_KERNEL);
+ if (!migf->vf_data) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ return migf;
+
+out_free:
+ fput(migf->filp);
+ return ERR_PTR(ret);
+}
+
+static struct nvmevf_migration_file *
+nvmevf_pci_save_device_data(struct nvmevf_pci_core_device *nvmevf_dev)
+{
+ struct nvmevf_migration_file *migf;
+ int ret;
+
+ migf = kzalloc(sizeof(*migf), GFP_KERNEL);
+ if (!migf)
+ return ERR_PTR(-ENOMEM);
+
+ migf->filp = anon_inode_getfile("nvmevf_mig", &nvmevf_save_fops, migf,
+ O_RDONLY);
+ if (IS_ERR(migf->filp)) {
+ int err = PTR_ERR(migf->filp);
+
+ kfree(migf);
+ return ERR_PTR(err);
+ }
+
+ stream_open(migf->filp->f_inode, migf->filp);
+ mutex_init(&migf->lock);
+
+ ret = nvmevf_cmd_query_data_size(nvmevf_dev, &migf->total_length);
+ if (ret)
+ goto out_free;
+ /* Allocate buffer and save the device states*/
+ migf->vf_data = kvzalloc(migf->total_length, GFP_KERNEL);
+ if (!migf->vf_data) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ ret = nvmevf_cmd_save_data(nvmevf_dev, migf->vf_data, migf->total_length);
+ if (ret)
+ goto out_free;
+
+ return migf;
+out_free:
+ fput(migf->filp);
+ return ERR_PTR(ret);
+}
+
+static struct file *
+nvmevf_pci_step_device_state_locked(struct nvmevf_pci_core_device *nvmevf_dev, u32 new)
+{
+ u32 cur = nvmevf_dev->mig_state;
+ int ret;
+
+ if (cur == VFIO_DEVICE_STATE_RUNNING && new == VFIO_DEVICE_STATE_STOP) {
+ ret = nvmevf_cmd_suspend_device(nvmevf_dev);
+ if (ret)
+ return ERR_PTR(ret);
+ return NULL;
+ }
+
+ if (cur == VFIO_DEVICE_STATE_STOP && new == VFIO_DEVICE_STATE_STOP_COPY) {
+ struct nvmevf_migration_file *migf;
+
+ migf = nvmevf_pci_save_device_data(nvmevf_dev);
+ if (IS_ERR(migf))
+ return ERR_CAST(migf);
+ get_file(migf->filp);
+ nvmevf_dev->saving_migf = migf;
+ return migf->filp;
+ }
+
+ if (cur == VFIO_DEVICE_STATE_STOP_COPY && new == VFIO_DEVICE_STATE_STOP) {
+ nvmevf_disable_fds(nvmevf_dev);
+ return NULL;
+ }
+
+ if (cur == VFIO_DEVICE_STATE_STOP && new == VFIO_DEVICE_STATE_RESUMING) {
+ struct nvmevf_migration_file *migf;
+
+ migf = nvmevf_pci_resume_device_data(nvmevf_dev);
+ if (IS_ERR(migf))
+ return ERR_CAST(migf);
+ get_file(migf->filp);
+ nvmevf_dev->resuming_migf = migf;
+ return migf->filp;
+ }
+
+ if (cur == VFIO_DEVICE_STATE_RESUMING && new == VFIO_DEVICE_STATE_STOP) {
+ ret = nvmevf_cmd_load_data(nvmevf_dev, nvmevf_dev->resuming_migf);
+ if (ret)
+ return ERR_PTR(ret);
+ nvmevf_disable_fds(nvmevf_dev);
+ return NULL;
+ }
+
+ if (cur == VFIO_DEVICE_STATE_STOP && new == VFIO_DEVICE_STATE_RUNNING) {
+ nvmevf_cmd_resume_device(nvmevf_dev);
+ return NULL;
+ }
+
+ /* vfio_mig_get_next_state() does not use arcs other than the above */
+ WARN_ON(true);
+ return ERR_PTR(-EINVAL);
+}
+
+static void nvmevf_state_mutex_unlock(struct nvmevf_pci_core_device *nvmevf_dev)
+{
+again:
+ spin_lock(&nvmevf_dev->reset_lock);
+ if (nvmevf_dev->deferred_reset) {
+ nvmevf_dev->deferred_reset = false;
+ spin_unlock(&nvmevf_dev->reset_lock);
+ nvmevf_dev->mig_state = VFIO_DEVICE_STATE_RUNNING;
+ nvmevf_disable_fds(nvmevf_dev);
+ goto again;
+ }
+ mutex_unlock(&nvmevf_dev->state_mutex);
+ spin_unlock(&nvmevf_dev->reset_lock);
+}
+
+static struct file *
+nvmevf_pci_set_device_state(struct vfio_device *vdev, enum vfio_device_mig_state new_state)
+{
+ struct nvmevf_pci_core_device *nvmevf_dev = container_of(vdev,
+ struct nvmevf_pci_core_device, core_device.vdev);
+ enum vfio_device_mig_state next_state;
+ struct file *res = NULL;
+ int ret;
+
+ mutex_lock(&nvmevf_dev->state_mutex);
+ while (new_state != nvmevf_dev->mig_state) {
+ ret = vfio_mig_get_next_state(vdev, nvmevf_dev->mig_state, new_state, &next_state);
+ if (ret) {
+ res = ERR_PTR(-EINVAL);
+ break;
+ }
+
+ res = nvmevf_pci_step_device_state_locked(nvmevf_dev, next_state);
+ if (IS_ERR(res))
+ break;
+ nvmevf_dev->mig_state = next_state;
+ if (WARN_ON(res && new_state != nvmevf_dev->mig_state)) {
+ fput(res);
+ res = ERR_PTR(-EINVAL);
+ break;
+ }
+ }
+ nvmevf_state_mutex_unlock(nvmevf_dev);
+ return res;
+}
+
+static int nvmevf_pci_get_device_state(struct vfio_device *vdev,
+ enum vfio_device_mig_state *curr_state)
+{
+ struct nvmevf_pci_core_device *nvmevf_dev = container_of(
+ vdev, struct nvmevf_pci_core_device, core_device.vdev);
+
+ mutex_lock(&nvmevf_dev->state_mutex);
+ *curr_state = nvmevf_dev->mig_state;
+ nvmevf_state_mutex_unlock(nvmevf_dev);
+ return 0;
+}
static int nvmevf_pci_open_device(struct vfio_device *core_vdev)
{
- struct vfio_pci_core_device *vdev =
- container_of(core_vdev, struct vfio_pci_core_device, vdev);
+ struct nvmevf_pci_core_device *nvmevf_dev = container_of(
+ core_vdev, struct nvmevf_pci_core_device, core_device.vdev);
+ struct vfio_pci_core_device *vdev = &nvmevf_dev->core_device;
int ret;
ret = vfio_pci_core_enable(vdev);
if (ret)
return ret;
+ if (nvmevf_dev->migrate_cap)
+ nvmevf_dev->mig_state = VFIO_DEVICE_STATE_RUNNING;
vfio_pci_core_finish_enable(vdev);
return 0;
}
+static void nvmevf_cmd_close_migratable(struct nvmevf_pci_core_device *nvmevf_dev)
+{
+ if (!nvmevf_dev->migrate_cap)
+ return;
+
+ mutex_lock(&nvmevf_dev->state_mutex);
+ nvmevf_disable_fds(nvmevf_dev);
+ nvmevf_state_mutex_unlock(nvmevf_dev);
+}
+
+static void nvmevf_pci_close_device(struct vfio_device *core_vdev)
+{
+ struct nvmevf_pci_core_device *nvmevf_dev = container_of(
+ core_vdev, struct nvmevf_pci_core_device, core_device.vdev);
+
+ nvmevf_cmd_close_migratable(nvmevf_dev);
+ vfio_pci_core_close_device(core_vdev);
+}
+
+static const struct vfio_migration_ops nvmevf_pci_mig_ops = {
+ .migration_set_state = nvmevf_pci_set_device_state,
+ .migration_get_state = nvmevf_pci_get_device_state,
+};
+
+static int nvmevf_migration_init_dev(struct vfio_device *core_vdev)
+{
+ struct nvmevf_pci_core_device *nvmevf_dev = container_of(core_vdev,
+ struct nvmevf_pci_core_device, core_device.vdev);
+ struct pci_dev *pdev = to_pci_dev(core_vdev->dev);
+ int vf_id;
+ int ret = -1;
+
+ if (!pdev->is_virtfn)
+ return ret;
+
+ nvmevf_dev->migrate_cap = 1;
+
+ vf_id = pci_iov_vf_id(pdev);
+ if (vf_id < 0)
+ return ret;
+ nvmevf_dev->vf_id = vf_id + 1;
+ core_vdev->migration_flags = VFIO_MIGRATION_STOP_COPY;
+
+ mutex_init(&nvmevf_dev->state_mutex);
+ spin_lock_init(&nvmevf_dev->reset_lock);
+ core_vdev->mig_ops = &nvmevf_pci_mig_ops;
+
+ return vfio_pci_core_init_dev(core_vdev);
+}
+
static const struct vfio_device_ops nvmevf_pci_ops = {
.name = "nvme-vfio-pci",
- .init = vfio_pci_core_init_dev,
+ .init = nvmevf_migration_init_dev,
.release = vfio_pci_core_release_dev,
.open_device = nvmevf_pci_open_device,
- .close_device = vfio_pci_core_close_device,
+ .close_device = nvmevf_pci_close_device,
.ioctl = vfio_pci_core_ioctl,
.device_feature = vfio_pci_core_ioctl_feature,
.read = vfio_pci_core_read,
@@ -47,32 +521,56 @@ static const struct vfio_device_ops nvmevf_pci_ops = {
static int nvmevf_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
- struct vfio_pci_core_device *vdev;
+ struct nvmevf_pci_core_device *nvmevf_dev;
int ret;
- vdev = vfio_alloc_device(vfio_pci_core_device, vdev, &pdev->dev,
- &nvmevf_pci_ops);
- if (IS_ERR(vdev))
- return PTR_ERR(vdev);
+ nvmevf_dev = vfio_alloc_device(nvmevf_pci_core_device, core_device.vdev,
+ &pdev->dev, &nvmevf_pci_ops);
+ if (IS_ERR(nvmevf_dev))
+ return PTR_ERR(nvmevf_dev);
- dev_set_drvdata(&pdev->dev, vdev);
- ret = vfio_pci_core_register_device(vdev);
+ dev_set_drvdata(&pdev->dev, &nvmevf_dev->core_device);
+ ret = vfio_pci_core_register_device(&nvmevf_dev->core_device);
if (ret)
goto out_put_dev;
-
return 0;
out_put_dev:
- vfio_put_device(&vdev->vdev);
+ vfio_put_device(&nvmevf_dev->core_device.vdev);
return ret;
+
}
static void nvmevf_pci_remove(struct pci_dev *pdev)
{
- struct vfio_pci_core_device *vdev = dev_get_drvdata(&pdev->dev);
+ struct nvmevf_pci_core_device *nvmevf_dev = nvmevf_drvdata(pdev);
+
+ vfio_pci_core_unregister_device(&nvmevf_dev->core_device);
+ vfio_put_device(&nvmevf_dev->core_device.vdev);
+}
+
+static void nvmevf_pci_aer_reset_done(struct pci_dev *pdev)
+{
+ struct nvmevf_pci_core_device *nvmevf_dev = nvmevf_drvdata(pdev);
+
+ if (!nvmevf_dev->migrate_cap)
+ return;
- vfio_pci_core_unregister_device(vdev);
- vfio_put_device(&vdev->vdev);
+ /*
+ * As the higher VFIO layers are holding locks across reset and using
+ * those same locks with the mm_lock we need to prevent ABBA deadlock
+ * with the state_mutex and mm_lock.
+ * In case the state_mutex was taken already we defer the cleanup work
+ * to the unlock flow of the other running context.
+ */
+ spin_lock(&nvmevf_dev->reset_lock);
+ nvmevf_dev->deferred_reset = true;
+ if (!mutex_trylock(&nvmevf_dev->state_mutex)) {
+ spin_unlock(&nvmevf_dev->reset_lock);
+ return;
+ }
+ spin_unlock(&nvmevf_dev->reset_lock);
+ nvmevf_state_mutex_unlock(nvmevf_dev);
}
static const struct pci_device_id nvmevf_pci_table[] = {
@@ -83,12 +581,17 @@ static const struct pci_device_id nvmevf_pci_table[] = {
MODULE_DEVICE_TABLE(pci, nvmevf_pci_table);
+static const struct pci_error_handlers nvmevf_err_handlers = {
+ .reset_done = nvmevf_pci_aer_reset_done,
+ .error_detected = vfio_pci_core_aer_err_detected,
+};
+
static struct pci_driver nvmevf_pci_driver = {
.name = KBUILD_MODNAME,
.id_table = nvmevf_pci_table,
.probe = nvmevf_pci_probe,
.remove = nvmevf_pci_remove,
- .err_handler = &vfio_pci_core_err_handlers,
+ .err_handler = &nvmevf_err_handlers,
.driver_managed_dma = true,
};
@@ -96,4 +599,4 @@ module_pci_driver(nvmevf_pci_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Lei Rao <lei.rao@intel.com>");
-MODULE_DESCRIPTION("NVMe VFIO PCI - Generic VFIO PCI driver for NVMe");
+MODULE_DESCRIPTION("NVMe VFIO PCI - VFIO PCI driver with live migration support for NVMe");
diff --git a/drivers/vfio/pci/nvme/nvme.h b/drivers/vfio/pci/nvme/nvme.h
new file mode 100644
index 000000000000..c8464554ef53
--- /dev/null
+++ b/drivers/vfio/pci/nvme/nvme.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022, INTEL CORPORATION. All rights reserved
+ */
+
+#ifndef NVME_VFIO_PCI_H
+#define NVME_VFIO_PCI_H
+
+#include <linux/kernel.h>
+#include <linux/vfio_pci_core.h>
+#include <linux/nvme.h>
+
+struct nvme_live_mig_query_size {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[9];
+ __u16 vf_index;
+ __u16 rsvd2;
+ __u32 rsvd3[5];
+};
+
+struct nvme_live_mig_suspend {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[9];
+ __u16 vf_index;
+ __u16 rsvd2;
+ __u32 rsvd3[5];
+};
+
+struct nvme_live_mig_resume {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[9];
+ __u16 vf_index;
+ __u16 rsvd2;
+ __u32 rsvd3[5];
+};
+
+struct nvme_live_mig_save_data {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[5];
+ __le64 prp1;
+ __le64 prp2;
+ __u16 vf_index;
+ __u16 rsvd2;
+ __u32 rsvd3[5];
+};
+
+struct nvme_live_mig_load_data {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[5];
+ __le64 prp1;
+ __le64 prp2;
+ __u16 vf_index;
+ __u16 rsvd2;
+ __u32 size;
+ __u32 rsvd3[4];
+};
+
+enum nvme_live_mig_admin_opcode {
+ nvme_admin_live_mig_query_data_size = 0xC4,
+ nvme_admin_live_mig_suspend = 0xC8,
+ nvme_admin_live_mig_resume = 0xCC,
+ nvme_admin_live_mig_save_data = 0xD2,
+ nvme_admin_live_mig_load_data = 0xD5,
+};
+
+struct nvme_live_mig_command {
+ union {
+ struct nvme_live_mig_query_size query;
+ struct nvme_live_mig_suspend suspend;
+ struct nvme_live_mig_resume resume;
+ struct nvme_live_mig_save_data save;
+ struct nvme_live_mig_load_data load;
+ };
+};
+
+struct nvmevf_migration_file {
+ struct file *filp;
+ struct mutex lock;
+ bool disabled;
+ u8 *vf_data;
+ size_t total_length;
+};
+
+struct nvmevf_pci_core_device {
+ struct vfio_pci_core_device core_device;
+ int vf_id;
+ u8 migrate_cap:1;
+ u8 deferred_reset:1;
+ /* protect migration state */
+ struct mutex state_mutex;
+ enum vfio_device_mig_state mig_state;
+ /* protect the reset_done flow */
+ spinlock_t reset_lock;
+ struct nvmevf_migration_file *resuming_migf;
+ struct nvmevf_migration_file *saving_migf;
+};
+
+extern int nvme_submit_vf_cmd(struct pci_dev *dev, struct nvme_command *cmd,
+ size_t *result, void *buffer, unsigned int bufflen);
+
+#endif /* NVME_VFIO_PCI_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [RFC PATCH 4/5] nvme-vfio: check if the hardware supports live migration
2022-12-06 5:58 [RFC PATCH 0/5] Add new VFIO PCI driver for NVMe devices Lei Rao
` (2 preceding siblings ...)
2022-12-06 5:58 ` [RFC PATCH 3/5] nvme-vfio: enable the function of VFIO live migration Lei Rao
@ 2022-12-06 5:58 ` Lei Rao
2022-12-06 13:47 ` Keith Busch
2022-12-06 5:58 ` [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device Lei Rao
4 siblings, 1 reply; 71+ messages in thread
From: Lei Rao @ 2022-12-06 5:58 UTC (permalink / raw)
To: kbusch, axboe, kch, hch, sagi, alex.williamson, cohuck, jgg,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm
Cc: eddie.dong, yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan,
Lei Rao
NVMe device can extend the vendor-specific field in the identify
controller data structure to indicate whether live migration
is supported. This patch checks if the NVMe device supports
live migration.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Yadong Li <yadong.li@intel.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
---
drivers/vfio/pci/nvme/nvme.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/vfio/pci/nvme/nvme.c b/drivers/vfio/pci/nvme/nvme.c
index 698e470a4e53..2ffc90ad556d 100644
--- a/drivers/vfio/pci/nvme/nvme.c
+++ b/drivers/vfio/pci/nvme/nvme.c
@@ -473,6 +473,36 @@ static void nvmevf_pci_close_device(struct vfio_device *core_vdev)
vfio_pci_core_close_device(core_vdev);
}
+static bool nvmevf_check_migration(struct pci_dev *pdev)
+{
+ struct nvme_command c = { };
+ struct nvme_id_ctrl *id;
+ u8 live_mig_support;
+ int ret;
+
+ c.identify.opcode = nvme_admin_identify;
+ c.identify.cns = NVME_ID_CNS_CTRL;
+
+ id = kmalloc(sizeof(struct nvme_id_ctrl), GFP_KERNEL);
+ if (!id)
+ return false;
+
+ ret = nvme_submit_vf_cmd(pdev, &c, NULL, id, sizeof(struct nvme_id_ctrl));
+ if (ret) {
+ dev_warn(&pdev->dev, "Get identify ctrl failed (ret=0x%x)\n", ret);
+ goto out;
+ }
+
+ live_mig_support = id->vs[0];
+ if (live_mig_support) {
+ kfree(id);
+ return true;
+ }
+out:
+ kfree(id);
+ return false;
+}
+
static const struct vfio_migration_ops nvmevf_pci_mig_ops = {
.migration_set_state = nvmevf_pci_set_device_state,
.migration_get_state = nvmevf_pci_get_device_state,
@@ -489,6 +519,10 @@ static int nvmevf_migration_init_dev(struct vfio_device *core_vdev)
if (!pdev->is_virtfn)
return ret;
+ /* Get the identify controller data structure to check the live migration support */
+ if (!nvmevf_check_migration(pdev))
+ return ret;
+
nvmevf_dev->migrate_cap = 1;
vf_id = pci_iov_vf_id(pdev);
--
2.34.1
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 5:58 [RFC PATCH 0/5] Add new VFIO PCI driver for NVMe devices Lei Rao
` (3 preceding siblings ...)
2022-12-06 5:58 ` [RFC PATCH 4/5] nvme-vfio: check if the hardware supports " Lei Rao
@ 2022-12-06 5:58 ` Lei Rao
2022-12-06 6:26 ` Christoph Hellwig
2022-12-07 22:42 ` Jonathan Derrick
4 siblings, 2 replies; 71+ messages in thread
From: Lei Rao @ 2022-12-06 5:58 UTC (permalink / raw)
To: kbusch, axboe, kch, hch, sagi, alex.williamson, cohuck, jgg,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm
Cc: eddie.dong, yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan,
Lei Rao
The documentation describes the details of the NVMe hardware
extension to support VFIO live migration.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Yadong Li <yadong.li@intel.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
---
drivers/vfio/pci/nvme/nvme.txt | 278 +++++++++++++++++++++++++++++++++
1 file changed, 278 insertions(+)
create mode 100644 drivers/vfio/pci/nvme/nvme.txt
diff --git a/drivers/vfio/pci/nvme/nvme.txt b/drivers/vfio/pci/nvme/nvme.txt
new file mode 100644
index 000000000000..eadcf2082eed
--- /dev/null
+++ b/drivers/vfio/pci/nvme/nvme.txt
@@ -0,0 +1,278 @@
+===========================
+NVMe Live Migration Support
+===========================
+
+Introduction
+------------
+To support live migration, NVMe device designs its own implementation,
+including five new specific admin commands and a capability flag in
+the vendor-specific field in the identify controller data structure to
+support VF's live migration usage. Software can use these live migration
+admin commands to get device migration state data size, save and load the
+data, suspend and resume the given VF device. They are submitted by software
+to the NVMe PF device's admin queue and ignored if placed in the VF device's
+admin queue. This is due to the NVMe VF device being passed to the virtual
+machine in the virtualization scenario. So VF device's admin queue is not
+available for the hypervisor to submit VF device live migration commands.
+The capability flag in the identify controller data structure can be used by
+software to detect if the NVMe device supports live migration. The following
+chapters introduce the detailed format of the commands and the capability flag.
+
+Definition of opcode for live migration commands
+------------------------------------------------
+
++---------------------------+-----------+-----------+------------+
+| | | | |
+| Opcode by Field | | | |
+| | | | |
++--------+---------+--------+ | | |
+| | | | Combined | Namespace | |
+| 07 | 06:02 | 01:00 | Opcode | Identifier| Command |
+| | | | | used | |
++--------+---------+--------+ | | |
+|Generic | Function| Data | | | |
+|command | |Transfer| | | |
++--------+---------+--------+-----------+-----------+------------+
+| |
+| Vendor SpecificOpcode |
++--------+---------+--------+-----------+-----------+------------+
+| | | | | | Query the |
+| 1b | 10001 | 00 | 0xC4 | | data size |
++--------+---------+--------+-----------+-----------+------------+
+| | | | | | Suspend the|
+| 1b | 10010 | 00 | 0xC8 | | VF |
++--------+---------+--------+-----------+-----------+------------+
+| | | | | | Resume the |
+| 1b | 10011 | 00 | 0xCC | | VF |
++--------+---------+--------+-----------+-----------+------------+
+| | | | | | Save the |
+| 1b | 10100 | 10 | 0xD2 | |device data |
++--------+---------+--------+-----------+-----------+------------+
+| | | | | | Load the |
+| 1b | 10101 | 01 | 0xD5 | |device data |
++--------+---------+--------+-----------+-----------+------------+
+
+Definition of QUERY_DATA_SIZE command
+-------------------------------------
+
++---------+------------------------------------------------------------------------------------+
+| | |
+| Bytes | Description |
+| | |
++---------+------------------------------------------------------------------------------------+
+| | |
+| | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | Bits |Description | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 07:00 |Opcode(OPC):set to 0xC4 to indicate a qeury command | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 09:08 |Fused Operation(FUSE):Please see NVMe SPEC for more details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| 03:00 | | 13:10 |Reserved | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 15:14 |PRP or SGL for Data Transfer(PSDT): See NVMe SPEC for details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 31:16 |Command Identifier(CID) | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | |
+| | |
++---------+------------------------------------------------------------------------------------+
+| 39:04 | Reserved |
++---------+------------------------------------------------------------------------------------+
+| 41:40 | VF index: means which VF controller internal data size to query |
++---------+------------------------------------------------------------------------------------+
+| 63:42 | Reserved |
++---------+------------------------------------------------------------------------------------+
+
+The QUERY_DATA_SIZE command is used to query the NVMe VF internal data size for live migration.
+When the NVMe firmware receives the command, it will return the size of NVMe VF internal
+data. The data size depends on how many IO queues are created.
+
+Definition of SUSPEND command
+-----------------------------
+
++---------+------------------------------------------------------------------------------------+
+| | |
+| Bytes | Description |
+| | |
++---------+------------------------------------------------------------------------------------+
+| | |
+| | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | Bits |Description | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 07:00 |Opcode(OPC):set to 0xC8 to indicate a suspend command | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 09:08 |Fused Operation(FUSE):Please see NVMe specification for details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| 03:00 | | 13:10 |Reserved | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 15:14 |PRP or SGL for Data Transfer(PSDT):See NVMe SPEC for details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 31:16 |Command Identifier(CID) | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | |
+| | |
++---------+------------------------------------------------------------------------------------+
+| 39:04 | Reserved |
++---------+------------------------------------------------------------------------------------+
+| 41:40 | VF index: means which VF controller to suspend |
++---------+------------------------------------------------------------------------------------+
+| 63:42 | Reserved |
++---------+------------------------------------------------------------------------------------+
+
+The SUSPEND command is used to suspend the NVMe VF controller. When the NVMe firmware receives
+this command, it will suspend the NVMe VF controller.
+
+Definition of RESUME command
+----------------------------
+
++---------+------------------------------------------------------------------------------------+
+| | |
+| Bytes | Description |
+| | |
++---------+------------------------------------------------------------------------------------+
+| | |
+| | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | Bits |Description | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 07:00 |Opcode(OPC):set to 0xCC to indicate a resume command | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 09:08 |Fused Operation(FUSE):Please see NVMe SPEC for details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| 03:00 | | 13:10 |Reserved | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 15:14 |PRP or SGL for Data Transfer(PSDT):See NVMe SPEC for details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 31:16 |Command Identifier(CID) | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | |
+| | |
++---------+------------------------------------------------------------------------------------+
+| 39:04 | Reserved |
++---------+------------------------------------------------------------------------------------+
+| 41:40 | VF index: means which VF controller to resume |
++---------+------------------------------------------------------------------------------------+
+| 63:42 | Reserved |
++---------+------------------------------------------------------------------------------------+
+
+The RESUME command is used to resume the NVMe VF controller. When firmware receives this command,
+it will restart the NVMe VF controller.
+
+Definition of SAVE_DATA command
+--------------------------
+
++---------+------------------------------------------------------------------------------------+
+| | |
+| Bytes | Description |
+| | |
++---------+------------------------------------------------------------------------------------+
+| | |
+| | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | Bits |Description | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 07:00 |Opcode(OPC):set to 0xD2 to indicate a save command | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 09:08 |Fused Operation(FUSE):Please see NVMe SPEC for details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| 03:00 | | 13:10 |Reserved | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 15:14 |PRP or SGL for Data Transfer(PSDT):See NVMe SPEC for details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 31:16 |Command Identifier(CID) | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | |
+| | |
++---------+------------------------------------------------------------------------------------+
+| 23:04 | Reserved |
++---------+------------------------------------------------------------------------------------+
+| 31:24 | PRP Entry1:the first PRP entry for the commmand or a PRP List Pointer |
++---------+------------------------------------------------------------------------------------+
+| 39:32 | PRP Entry2:the second address entry(reserved,page base address or PRP List Pointer)|
++---------+------------------------------------------------------------------------------------+
+| 41:40 | VF index: means which VF controller internal data to save |
++---------+------------------------------------------------------------------------------------+
+| 63:42 | Reserved |
++---------+------------------------------------------------------------------------------------+
+
+The SAVE_DATA command is used to save the NVMe VF internal data for live migration. When firmware
+receives this command, it will save the admin queue states, save some registers, drain IO SQs
+and CQs, save every IO queue state, disable the VF controller, and transfer all data to the
+host memory through DMA.
+
+Definition of LOAD_DATA command
+--------------------------
+
++---------+------------------------------------------------------------------------------------+
+| | |
+| Bytes | Description |
+| | |
++---------+------------------------------------------------------------------------------------+
+| | |
+| | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | Bits |Description | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 07:00 |Opcode(OPC):set to 0xD5 to indicate a load command | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 09:08 |Fused Operation(FUSE):Please see NVMe SPEC for details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| 03:00 | | 13:10 |Reserved | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 15:14 |PRP or SGL for Data Transfer(PSDT): See NVMe SPEC for details[1] | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | | 31:16 |Command Identifier(CID) | |
+| | +-----------+--------------------------------------------------------------------+ |
+| | |
+| | |
++---------+------------------------------------------------------------------------------------+
+| 23:04 | Reserved |
++---------+------------------------------------------------------------------------------------+
+| 31:24 | PRP Entry1:the first PRP entry for the commmand or a PRP List Pointer |
++---------+------------------------------------------------------------------------------------+
+| 39:32 | PRP Entry2:the second address entry(reserved,page base address or PRP List Pointer)|
++---------+------------------------------------------------------------------------------------+
+| 41:40 | VF index: means which VF controller internal data to load |
++---------+------------------------------------------------------------------------------------+
+| 47:44 | Size: means the size of the device's internal data to be loaded |
++---------+------------------------------------------------------------------------------------+
+| 63:48 | Reserved |
++---------+------------------------------------------------------------------------------------+
+
+The LOAD_DATA command is used to restore the NVMe VF internal data. When firmware receives this
+command, it will read the device internal's data from the host memory through DMA, restore the
+admin queue states and some registers, and restore every IO queue state.
+
+Extensions of the vendor-specific field in the identify controller data structure
+---------------------------------------------------------------------------------
+
++---------+------+------+------+-------------------------------+
+| | | | | |
+| Bytes | I/O |Admin | Disc | Description |
+| | | | | |
++---------+------+------+------+-------------------------------+
+| | | | | |
+| 01:00 | M | M | R | PCI Vendor ID(VID) |
++---------+------+------+------+-------------------------------+
+| | | | | |
+| 03:02 | M | M | R | PCI Subsytem Vendor ID(SSVID) |
++---------+------+------+------+-------------------------------+
+| | | | | |
+| ... | ... | ... | ... | ... |
++---------+------+------+------+-------------------------------+
+| | | | | |
+| 3072 | O | O | O | Live Migration Support |
++---------+------+------+------+-------------------------------+
+| | | | | |
+|4095:3073| O | O | O | Vendor Specific |
++---------+------+------+------+-------------------------------+
+
+According to NVMe specification, the bytes from 3072 to 4095 are vendor-specific fields.
+NVMe device uses the 3072 bytes in the identify controller data structure to indicate
+whether live migration is supported. 0x0 means live migration is not supported. 0x01 means
+live migration is supported, and other values are reserved.
+
+[1] https://nvmexpress.org/wp-content/uploads/NVMe-NVM-Express-2.0a-2021.07.26-Ratified.pdf
--
2.34.1
^ permalink raw reply related [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 5:58 ` [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver Lei Rao
@ 2022-12-06 6:19 ` Christoph Hellwig
2022-12-06 13:44 ` Jason Gunthorpe
2022-12-06 7:00 ` kernel test robot
2022-12-06 9:01 ` kernel test robot
2 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 6:19 UTC (permalink / raw)
To: Lei Rao
Cc: kbusch, axboe, kch, hch, sagi, alex.williamson, cohuck, jgg,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 01:58:12PM +0800, Lei Rao wrote:
> The new function nvme_submit_vf_cmd() helps the host VF driver to issue
> VF admin commands. It's helpful in some cases that the host NVMe driver
> does not control VF's admin queue. For example, in the virtualization
> device pass-through case, the VF controller's admin queue is governed
> by the Guest NVMe driver. Host VF driver relies on PF device's admin
> queue to control VF devices like vendor-specific live migration commands.
WTF are you even smoking when you think this would be acceptable?
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 5:58 ` [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device Lei Rao
@ 2022-12-06 6:26 ` Christoph Hellwig
2022-12-06 13:05 ` Jason Gunthorpe
2022-12-07 22:42 ` Jonathan Derrick
1 sibling, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 6:26 UTC (permalink / raw)
To: Lei Rao
Cc: kbusch, axboe, kch, hch, sagi, alex.williamson, cohuck, jgg,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 01:58:16PM +0800, Lei Rao wrote:
> The documentation describes the details of the NVMe hardware
> extension to support VFIO live migration.
This is not a NVMe hardware extension, this is some really strange
and half-assed intel-specific extension to nvme, which like any other
vendors specific non-standard extensions to nvme we refused to support
in Linux.
There is a TPAR for live migration building blocks under discussion in
the NVMe technical working group. It will still require mediatation
of access to the admin queue to deal with the huge amout of state nvme
has that needs to be migrated (and which doesn't seem to be covered at
all here). In Linux the equivalent would be to implement a mdev driver
that allows passing through the I/O qeues to a guest, but it might
be a better idea to handle the device model emulation entirely in
Qemu (or other userspace device models) and just find a way to expose
enough of the I/O queues to userspace.
The current TPAR seems to be very complicated for that, as in many
cases we'd only need a way to tіe certain namespaces to certain I/O
queues and not waste a lot of resources on the rest of the controller.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 5:58 ` [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver Lei Rao
2022-12-06 6:19 ` Christoph Hellwig
@ 2022-12-06 7:00 ` kernel test robot
2022-12-06 9:01 ` kernel test robot
2 siblings, 0 replies; 71+ messages in thread
From: kernel test robot @ 2022-12-06 7:00 UTC (permalink / raw)
To: Lei Rao; +Cc: oe-kbuild-all
[-- Attachment #1: Type: text/plain, Size: 2748 bytes --]
Hi Lei,
[FYI, it's a private test report for your RFC patch.]
[auto build test WARNING on awilliam-vfio/for-linus]
[also build test WARNING on linus/master v6.1-rc8 next-20221206]
[cannot apply to awilliam-vfio/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Lei-Rao/Add-new-VFIO-PCI-driver-for-NVMe-devices/20221206-135959
base: https://github.com/awilliam/linux-vfio.git for-linus
patch link: https://lore.kernel.org/r/20221206055816.292304-2-lei.rao%40intel.com
patch subject: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
config: ia64-allyesconfig
compiler: ia64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/d2d8886a23a91021f6ae8e6df99e9398376b9de2
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Lei-Rao/Add-new-VFIO-PCI-driver-for-NVMe-devices/20221206-135959
git checkout d2d8886a23a91021f6ae8e6df99e9398376b9de2
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 SHELL=/bin/bash drivers/nvme/
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/nvme/host/pci.c:3584:5: warning: no previous prototype for 'nvme_submit_vf_cmd' [-Wmissing-prototypes]
3584 | int nvme_submit_vf_cmd(struct pci_dev *dev, struct nvme_command *cmd,
| ^~~~~~~~~~~~~~~~~~
vim +/nvme_submit_vf_cmd +3584 drivers/nvme/host/pci.c
3583
> 3584 int nvme_submit_vf_cmd(struct pci_dev *dev, struct nvme_command *cmd,
3585 size_t *result, void *buffer, unsigned int bufflen)
3586 {
3587 struct nvme_dev *ndev = NULL;
3588 union nvme_result res = { };
3589 int ret;
3590
3591 ndev = pci_iov_get_pf_drvdata(dev, &nvme_driver);
3592 if (IS_ERR(ndev))
3593 return PTR_ERR(ndev);
3594 ret = __nvme_submit_sync_cmd(ndev->ctrl.admin_q, cmd, &res, buffer, bufflen,
3595 NVME_QID_ANY, 0, 0);
3596 if (ret >= 0 && result)
3597 *result = le32_to_cpu(res.u32);
3598 return ret;
3599 }
3600 EXPORT_SYMBOL_GPL(nvme_submit_vf_cmd);
3601
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 322066 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/ia64 6.1.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="ia64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_LEGACY=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_LEGACY_TIMER_TICK=y
CONFIG_TIME_KUNIT_TEST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
CONFIG_BPF=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y
# end of BPF subsystem
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_SCHED_CORE=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_UCLAMP_TASK_GROUP=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KCMP=y
CONFIG_EMBEDDED=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup
CONFIG_PGTABLE_LEVELS=3
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_AUDIT_ARCH=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
CONFIG_IA64_SGI_UV=y
CONFIG_IA64_HP_SBA_IOMMU=y
CONFIG_IA64_CYCLONE=y
CONFIG_ARCH_FORCE_MAX_ORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=4096
CONFIG_HOTPLUG_CPU=y
CONFIG_SCHED_SMT=y
CONFIG_PERMIT_BSP_REMOVE=y
CONFIG_FORCE_CPEI_RETARGET=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_HAVE_MEMORYLESS_NODES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_IA64_PALINFO=y
CONFIG_IA64_MC_ERR_INJECT=y
CONFIG_IA64_ESI=y
CONFIG_IA64_HP_AML_NFW=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# end of Processor type and features
#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=120
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_TABLE_LIB=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_DEBUGGER_USER=y
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_CONFIGFS=y
CONFIG_ACPI_PFRUT=y
CONFIG_ACPI_PCC=y
CONFIG_PMIC_OPREGION=y
CONFIG_BYTCRC_PMIC_OPREGION=y
CONFIG_CHTCRC_PMIC_OPREGION=y
CONFIG_CHT_WC_PMIC_OPREGION=y
#
# CPU Frequency scaling
#
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_IA64_ACPI_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=y
# end of CPU Frequency scaling
# end of CPU Frequency scaling
# end of Power management and ACPI options
CONFIG_MSPEC=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KPROBES=y
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_FUNCTION_DESCRIPTORS=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_TASK_STRUCT_ON_STACK=y
CONFIG_ARCH_TASK_STRUCT_ALLOCATOR=y
CONFIG_ARCH_THREAD_STACK_ALLOCATOR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ISA_BUS_API=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_LOCK_EVENT_COUNTS=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_BFQ_CGROUP_DEBUG=y
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=19
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ZONE_DMA32=y
CONFIG_HMM_MIRROR=y
CONFIG_GET_FREE_REGION=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ANON_VMA_NAME=y
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
CONFIG_LRU_GEN_STATS=y
#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_KUNIT_TEST=y
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_VADDR_KUNIT_TEST=y
CONFIG_DAMON_SYSFS=y
CONFIG_DAMON_DBGFS=y
CONFIG_DAMON_DBGFS_KUNIT_TEST=y
CONFIG_DAMON_RECLAIM=y
CONFIG_DAMON_LRU_SORT=y
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
CONFIG_TLS=y
CONFIG_TLS_DEVICE=y
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_INTERFACE=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=y
CONFIG_SMC_DIAG=y
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_NV=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_TCP_CONG_DCTCP=y
CONFIG_TCP_CONG_CDG=y
CONFIG_TCP_CONG_BBR=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_DCTCP is not set
# CONFIG_DEFAULT_CDG is not set
# CONFIG_DEFAULT_BBR is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_ESP_OFFLOAD=y
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
CONFIG_MPTCP_KUNIT_TEST=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_HOOK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NF_CT_NETLINK_HELPER=y
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=y
CONFIG_NFT_CT=y
CONFIG_NFT_FLOW_OFFLOAD=y
CONFIG_NFT_CONNLIMIT=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
CONFIG_NFT_TUNNEL=y
CONFIG_NFT_OBJREF=y
CONFIG_NFT_QUEUE=y
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
CONFIG_NFT_COMPAT=y
CONFIG_NFT_HASH=y
CONFIG_NFT_FIB=y
CONFIG_NFT_FIB_INET=y
CONFIG_NFT_XFRM=y
CONFIG_NFT_SOCKET=y
CONFIG_NFT_OSF=y
CONFIG_NFT_TPROXY=y
CONFIG_NFT_SYNPROXY=y
CONFIG_NF_DUP_NETDEV=y
CONFIG_NFT_DUP_NETDEV=y
CONFIG_NFT_FWD_NETDEV=y
CONFIG_NFT_FIB_NETDEV=y
CONFIG_NFT_REJECT_NETDEV=y
CONFIG_NF_FLOW_TABLE_INET=y
CONFIG_NF_FLOW_TABLE=y
CONFIG_NF_FLOW_TABLE_PROCFS=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
CONFIG_NETFILTER_XT_SET=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# end of Core Netfilter Configuration
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_FO=y
CONFIG_IP_VS_OVF=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_MH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
CONFIG_IP_VS_TWOS=y
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=y
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
CONFIG_NFT_FIB_IPV4=y
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=y
CONFIG_NF_TPROXY_IPV6=y
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
CONFIG_NFT_DUP_IPV6=y
CONFIG_NFT_FIB_IPV6=y
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_SRH=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_META=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_NF_CONNTRACK_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
CONFIG_BPFILTER=y
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_AR9331=y
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_HELLCREEK=y
CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_DSA_COMMON=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_KSZ=y
CONFIG_NET_DSA_TAG_OCELOT=y
CONFIG_NET_DSA_TAG_OCELOT_8021Q=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_DSA_TAG_RTL4_A=y
CONFIG_NET_DSA_TAG_RTL8_4=y
CONFIG_NET_DSA_TAG_RZN1_A5PSW=y
CONFIG_NET_DSA_TAG_LAN9303=y
CONFIG_NET_DSA_TAG_SJA1105=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_TAG_XRS700X=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
CONFIG_6LOWPAN_NHC_FRAGMENT=y
CONFIG_6LOWPAN_NHC_HOP=y
CONFIG_6LOWPAN_NHC_IPV6=y
CONFIG_6LOWPAN_NHC_MOBILITY=y
CONFIG_6LOWPAN_NHC_ROUTING=y
CONFIG_6LOWPAN_NHC_UDP=y
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=y
CONFIG_6LOWPAN_GHC_UDP=y
CONFIG_6LOWPAN_GHC_ICMPV6=y
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=y
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=y
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=y
CONFIG_IEEE802154_6LOWPAN=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_FQ_PIE=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
# CONFIG_DEFAULT_FQ_CODEL is not set
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
CONFIG_DEFAULT_PFIFO_FAST=y
CONFIG_DEFAULT_NET_SCH="pfifo_fast"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
CONFIG_NET_EMATCH_IPT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_SAMPLE=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_CSUM=y
CONFIG_NET_ACT_MPLS=y
CONFIG_NET_ACT_VLAN=y
CONFIG_NET_ACT_BPF=y
CONFIG_NET_ACT_CONNMARK=y
CONFIG_NET_ACT_CTINFO=y
CONFIG_NET_ACT_SKBMOD=y
CONFIG_NET_ACT_IFE=y
CONFIG_NET_ACT_TUNNEL_KEY=y
CONFIG_NET_ACT_CT=y
CONFIG_NET_ACT_GATE=y
CONFIG_NET_IFE_SKBMARK=y
CONFIG_NET_IFE_SKBPRIO=y
CONFIG_NET_IFE_SKBTCINDEX=y
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_OPENVSWITCH_GENEVE=y
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=y
CONFIG_QRTR_SMD=y
CONFIG_QRTR_TUN=y
CONFIG_QRTR_MHI=y
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_NCSI_OEM_CMD_KEEP_PHY=y
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_YAM=y
# end of AX.25 network device drivers
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
CONFIG_CAN_J1939=y
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=y
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
CONFIG_BT_SELFTEST=y
CONFIG_BT_SELFTEST_ECDH=y
CONFIG_BT_SELFTEST_SMP=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_BCM=y
CONFIG_BT_RTL=y
CONFIG_BT_QCA=y
CONFIG_BT_MTK=y
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
CONFIG_BT_ATH3K=y
CONFIG_BT_MTKSDIO=y
CONFIG_BT_MTKUART=y
CONFIG_BT_QCOMSMD=y
CONFIG_BT_HCIRSI=y
CONFIG_BT_VIRTIO=y
# end of Bluetooth device drivers
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_MCTP_TEST=y
CONFIG_MCTP_FLOWS=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR=""
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
CONFIG_CFG80211_REG_RELAX_NO_IR=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_OCB_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_MESH_CSA_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_RDMA=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=y
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=y
CONFIG_NFC_SIM=y
CONFIG_NFC_PORT100=y
CONFIG_NFC_VIRTUAL_NCI=y
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=y
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_I2C=y
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_USB=y
CONFIG_NFC_MRVL_UART=y
CONFIG_NFC_MRVL_I2C=y
CONFIG_NFC_MRVL_SPI=y
CONFIG_NFC_ST21NFCA=y
CONFIG_NFC_ST21NFCA_I2C=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
CONFIG_NFC_ST_NCI_SPI=y
CONFIG_NFC_NXP_NCI=y
CONFIG_NFC_NXP_NCI_I2C=y
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_NFC_S3FWRN82_UART=y
CONFIG_NFC_ST95HF=y
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
CONFIG_PCIE_EDR=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_BRIDGE_EMUL=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
CONFIG_PCI_AARDVARK=y
CONFIG_PCIE_XILINX_NWL=y
CONFIG_PCI_FTPCI100=y
CONFIG_PCI_TEGRA=y
CONFIG_PCIE_RCAR_HOST=y
CONFIG_PCIE_RCAR_EP=y
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCIE_XILINX=y
CONFIG_PCIE_XILINX_CPM=y
CONFIG_PCI_XGENE=y
CONFIG_PCI_XGENE_MSI=y
CONFIG_PCI_V3_SEMI=y
CONFIG_PCI_VERSATILE=y
CONFIG_PCIE_ALTERA=y
CONFIG_PCIE_ALTERA_MSI=y
CONFIG_PCI_HOST_THUNDER_PEM=y
CONFIG_PCI_HOST_THUNDER_ECAM=y
CONFIG_PCIE_ROCKCHIP=y
CONFIG_PCIE_ROCKCHIP_HOST=y
CONFIG_PCIE_ROCKCHIP_EP=y
CONFIG_PCIE_MEDIATEK=y
CONFIG_PCIE_MEDIATEK_GEN3=y
CONFIG_PCIE_BRCMSTB=y
CONFIG_PCI_LOONGSON=y
CONFIG_PCIE_MICROCHIP_HOST=y
CONFIG_PCIE_APPLE_MSI_DOORBELL_ADDR=0xfffff000
CONFIG_PCIE_APPLE=y
CONFIG_PCIE_MT7621=y
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCI_DRA7XX=y
CONFIG_PCI_DRA7XX_HOST=y
CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
CONFIG_PCIE_DW_PLAT_EP=y
CONFIG_PCI_EXYNOS=y
CONFIG_PCI_IMX6=y
CONFIG_PCIE_SPEAR13XX=y
CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_KEYSTONE_HOST=y
CONFIG_PCI_KEYSTONE_EP=y
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_LAYERSCAPE_EP=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_QCOM_EP=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_ARTPEC6=y
CONFIG_PCIE_ARTPEC6_HOST=y
CONFIG_PCIE_ARTPEC6_EP=y
CONFIG_PCIE_ROCKCHIP_DW_HOST=y
CONFIG_PCIE_INTEL_GW=y
CONFIG_PCIE_KEEMBAY=y
CONFIG_PCIE_KEEMBAY_HOST=y
CONFIG_PCIE_KEEMBAY_EP=y
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_HISI_STB=y
CONFIG_PCI_MESON=y
CONFIG_PCIE_TEGRA194=y
CONFIG_PCIE_TEGRA194_HOST=y
CONFIG_PCIE_TEGRA194_EP=y
CONFIG_PCIE_VISCONTI_HOST=y
CONFIG_PCIE_UNIPHIER=y
CONFIG_PCIE_UNIPHIER_EP=y
CONFIG_PCIE_AL=y
CONFIG_PCIE_FU740=y
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
CONFIG_PCIE_MOBIVEIL=y
CONFIG_PCIE_MOBIVEIL_HOST=y
CONFIG_PCIE_MOBIVEIL_PLAT=y
CONFIG_PCIE_LAYERSCAPE_GEN4=y
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
CONFIG_PCIE_CADENCE_PLAT_EP=y
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
CONFIG_PCI_J721E_EP=y
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=y
CONFIG_PCI_EPF_NTB=y
CONFIG_PCI_EPF_VNTB=y
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers
CONFIG_CXL_BUS=y
CONFIG_CXL_PCI=y
CONFIG_CXL_MEM_RAW_COMMANDS=y
CONFIG_CXL_ACPI=y
CONFIG_CXL_PMEM=y
CONFIG_CXL_MEM=y
CONFIG_CXL_PORT=y
CONFIG_CXL_REGION=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_RXS_GEN3=y
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
CONFIG_FW_UPLOAD=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_HMEM_REPORTING=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_AC97=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=y
CONFIG_REGMAP_SOUNDWIRE_MBQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_REGMAP_I3C=y
CONFIG_REGMAP_SPI_AVMM=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options
#
# Bus devices
#
CONFIG_ARM_INTEGRATOR_LM=y
CONFIG_BT1_APB=y
CONFIG_BT1_AXI=y
CONFIG_MOXTET=y
CONFIG_HISILICON_LPC=y
CONFIG_INTEL_IXP4XX_EB=y
CONFIG_QCOM_EBI2=y
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_PCI_GENERIC=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_HAVE_MSG=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE=y
CONFIG_ARM_SCMI_POWER_DOMAIN=y
CONFIG_ARM_SCMI_POWER_CONTROL=y
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ARM_SCPI_POWER_DOMAIN=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT=y
CONFIG_MTK_ADSP_IPC=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=y
CONFIG_TURRIS_MOX_RWTM=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_TEE_BNXT_FW=y
CONFIG_CS_DSP=y
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=y
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=y
CONFIG_GOOGLE_VPD=y
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_BOOTLOADER_CONTROL=y
CONFIG_EFI_TEST=y
CONFIG_EFI_RCI2_TABLE=y
CONFIG_EFI_DISABLE_PCI_DMA=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
CONFIG_EFI_DISABLE_RUNTIME=y
CONFIG_EFI_COCO_SECRET=y
# end of EFI (Extensible Firmware Interface) Support
CONFIG_IMX_DSP=y
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_GNSS_USB=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_BCM63XX_PARTS=y
CONFIG_MTD_BRCM_U_BOOT=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_OF_PARTS_BCM4908=y
CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
CONFIG_MTD_PARSER_IMAGETAG=y
CONFIG_MTD_PARSER_TRX=y
CONFIG_MTD_SHARPSL_PARTS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_QCOMSMEM_PARTS=y
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_PSTORE=y
CONFIG_MTD_SWAP=y
CONFIG_MTD_PARTITIONED_MASTER=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_BT1_ROM=y
CONFIG_MTD_PHYSMAP_VERSATILE=y
CONFIG_MTD_PHYSMAP_GEMINI=y
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
CONFIG_MTD_SC520CDP=y
CONFIG_MTD_NETSC520=y
CONFIG_MTD_TS5500=y
CONFIG_MTD_PCI=y
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_MCHP23K256=y
CONFIG_MTD_MCHP48L640=y
CONFIG_MTD_SPEAR_SMI=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_SAMSUNG=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=y
#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_AMS_DELTA=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_NAND_SLC_LPC32XX=y
CONFIG_MTD_NAND_MLC_LPC32XX=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_BRCMNAND_BCM63XX=y
CONFIG_MTD_NAND_BRCMNAND_BCMA=y
CONFIG_MTD_NAND_BRCMNAND_BCMBCA=y
CONFIG_MTD_NAND_BRCMNAND_BRCMSTB=y
CONFIG_MTD_NAND_BRCMNAND_IPROC=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_MTD_NAND_OXNAS=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_NAND_SH_FLCTL=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_NAND_TXX9NDFMC=y
CONFIG_MTD_NAND_JZ4780=y
CONFIG_MTD_NAND_INGENIC_ECC=y
CONFIG_MTD_NAND_JZ4740_ECC=y
CONFIG_MTD_NAND_JZ4725B_BCH=y
CONFIG_MTD_NAND_JZ4780_BCH=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_MTD_NAND_SUNXI=y
CONFIG_MTD_NAND_HISI504=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_NAND_MTK=y
CONFIG_MTD_NAND_MXIC=y
CONFIG_MTD_NAND_TEGRA=y
CONFIG_MTD_NAND_STM32_FMC2=y
CONFIG_MTD_NAND_MESON=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_CADENCE=y
CONFIG_MTD_NAND_ARASAN=y
CONFIG_MTD_NAND_INTEL_LGM=y
CONFIG_MTD_NAND_RENESAS=y
#
# Misc
#
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=y
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=y
CONFIG_MTD_NAND_ECC_MEDIATEK=y
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
CONFIG_SPI_HISI_SFC=y
CONFIG_SPI_NXP_SPIFI=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_HYPERBUS=y
CONFIG_HBMC_AM654=y
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_ALL_DTBS=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=y
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
CONFIG_CDROM=y
CONFIG_PARIDE=y
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=y
CONFIG_PARIDE_PCD=y
CONFIG_PARIDE_PF=y
CONFIG_PARIDE_PT=y
CONFIG_PARIDE_PG=y
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=y
CONFIG_PARIDE_BPCK=y
CONFIG_PARIDE_COMM=y
CONFIG_PARIDE_DSTR=y
CONFIG_PARIDE_FIT2=y
CONFIG_PARIDE_FIT3=y
CONFIG_PARIDE_EPAT=y
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=y
CONFIG_PARIDE_FRIQ=y
CONFIG_PARIDE_FRPW=y
CONFIG_PARIDE_KBIC=y
CONFIG_PARIDE_KTTI=y
CONFIG_PARIDE_ON20=y
CONFIG_PARIDE_ON26=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
CONFIG_ZRAM=y
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
CONFIG_ZRAM_WRITEBACK=y
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=y
CONFIG_BLK_DEV_UBLK=y
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=y
CONFIG_BLK_DEV_RNBD_SERVER=y
#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_RDMA=y
CONFIG_NVME_FC=y
CONFIG_NVME_TCP=y
CONFIG_NVME_AUTH=y
CONFIG_NVME_APPLE=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_RDMA=y
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
CONFIG_NVME_TARGET_TCP=y
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_PHANTOM=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_GEHC_ACHC=y
CONFIG_HI6421V600_IRQ=y
CONFIG_HP_ILO=y
CONFIG_QCOM_COINCELL=y
CONFIG_QCOM_FASTRPC=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_PCH_PHUB=y
CONFIG_LATTICE_ECP3_CONFIG=y
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=y
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=y
CONFIG_VCPU_STALL_DETECTOR=y
CONFIG_C2PORT=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
CONFIG_BCM_VK=y
CONFIG_BCM_VK_TTY=y
CONFIG_MISC_ALCOR_PCI=y
CONFIG_MISC_RTSX_PCI=y
CONFIG_MISC_RTSX_USB=y
CONFIG_HABANA_AI=y
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y
CONFIG_PVPANIC_PCI=y
CONFIG_GP_PCI1XXXX=y
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_CXGB4_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_SCSI_BNX2X_FCOE=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_PCI=y
CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE=y
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPI3MR=y
CONFIG_SCSI_SMARTPQI=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_SCSI_MYRB=y
CONFIG_SCSI_MYRS=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_SCSI_SNIC=y
CONFIG_SCSI_SNIC_DEBUG_FS=y
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_FDOMAIN=y
CONFIG_SCSI_FDOMAIN_PCI=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_TCM_QLA2XXX=y
CONFIG_TCM_QLA2XXX_DEBUG=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_QEDI=y
CONFIG_QEDF=y
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_LPFC_DEBUG_FS=y
CONFIG_SCSI_EFCT=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_AM53C974=y
CONFIG_SCSI_WD719X=y
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_CHELSIO_FCOE=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_BRCM=y
CONFIG_AHCI_DA850=y
CONFIG_AHCI_DM816=y
CONFIG_AHCI_DWC=y
CONFIG_AHCI_ST=y
CONFIG_AHCI_IMX=y
CONFIG_AHCI_CEVA=y
CONFIG_AHCI_MTK=y
CONFIG_AHCI_MVEBU=y
CONFIG_AHCI_SUNXI=y
CONFIG_AHCI_TEGRA=y
CONFIG_AHCI_XGENE=y
CONFIG_AHCI_QORIQ=y
CONFIG_SATA_FSL=y
CONFIG_SATA_GEMINI=y
CONFIG_SATA_AHCI_SEATTLE=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_DWC=y
CONFIG_SATA_DWC_OLD_DMA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_RCAR=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_BK3710=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_FTIDE010=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IMX=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_PXA=y
CONFIG_PATA_WINBOND=y
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_ISAPNP=y
CONFIG_PATA_IXP4XX_CF=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_SAMSUNG_CF=y
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_MD_CLUSTER=y
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_UNSTRIPED=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_SMQ=y
CONFIG_DM_WRITECACHE=y
CONFIG_DM_EBS=y
CONFIG_DM_ERA=y
CONFIG_DM_CLONE=y
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_MULTIPATH_HST=y
CONFIG_DM_MULTIPATH_IOA=y
CONFIG_DM_DELAY=y
CONFIG_DM_DUST=y
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=y
CONFIG_DM_LOG_WRITES=y
CONFIG_DM_INTEGRITY=y
CONFIG_DM_ZONED=y
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
CONFIG_TCM_USER2=y
CONFIG_LOOPBACK_TARGET=y
CONFIG_TCM_FC=y
CONFIG_ISCSI_TARGET=y
CONFIG_ISCSI_TARGET_CXGB4=y
CONFIG_SBP_TARGET=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_WIREGUARD=y
CONFIG_WIREGUARD_DEBUG=y
CONFIG_EQUALIZER=y
CONFIG_NET_FC=y
CONFIG_IFB=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_RANDOM=y
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=y
CONFIG_IPVTAP=y
CONFIG_VXLAN=y
CONFIG_GENEVE=y
CONFIG_BAREUDP=y
CONFIG_GTP=y
CONFIG_AMT=y
CONFIG_MACSEC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=y
CONFIG_RIONET=y
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=y
CONFIG_TAP=y
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
CONFIG_NET_VRF=y
CONFIG_VSOCKMON=y
CONFIG_MHI_NET=y
CONFIG_SUNGEM_PHY=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_ARCNET_COM20020_CS=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=y
CONFIG_CAIF_DRIVERS=y
CONFIG_CAIF_TTY=y
CONFIG_CAIF_VIRTIO=y
#
# Distributed Switch Architecture drivers
#
CONFIG_B53=y
CONFIG_B53_SPI_DRIVER=y
CONFIG_B53_MDIO_DRIVER=y
CONFIG_B53_MMAP_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_B53_SERDES=y
CONFIG_NET_DSA_BCM_SF2=y
CONFIG_NET_DSA_LOOP=y
CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=y
CONFIG_NET_DSA_LANTIQ_GSWIP=y
CONFIG_NET_DSA_MT7530=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=y
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=y
CONFIG_NET_DSA_MICROCHIP_KSZ_SPI=y
CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MSCC_FELIX=y
CONFIG_NET_DSA_MSCC_SEVILLE=y
CONFIG_NET_DSA_AR9331=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_SJA1105=y
CONFIG_NET_DSA_SJA1105_PTP=y
CONFIG_NET_DSA_SJA1105_TAS=y
CONFIG_NET_DSA_SJA1105_VL=y
CONFIG_NET_DSA_XRS700X=y
CONFIG_NET_DSA_XRS700X_I2C=y
CONFIG_NET_DSA_XRS700X_MDIO=y
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_MDIO=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=y
CONFIG_NET_DSA_SMSC_LAN9303=y
CONFIG_NET_DSA_SMSC_LAN9303_I2C=y
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y
CONFIG_NET_DSA_VITESSE_VSC73XX=y
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=y
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=y
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_3C589=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_NET_VENDOR_ACTIONS=y
CONFIG_OWL_EMAC=y
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=y
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=y
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_ALTERA_TSE=y
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=y
CONFIG_PCNET32=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_AMD_XGBE=y
CONFIG_AMD_XGBE_DCB=y
CONFIG_NET_XGENE=y
CONFIG_NET_XGENE_V2=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_ARC_EMAC_CORE=y
CONFIG_ARC_EMAC=y
CONFIG_EMAC_ROCKCHIP=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=y
CONFIG_SPI_AX88796C_COMPRESSION=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_ALX=y
CONFIG_CX_ECAT=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCM4908_ENET=y
CONFIG_BCMGENET=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=y
CONFIG_BNX2X_SRIOV=y
CONFIG_BGMAC=y
CONFIG_BGMAC_BCMA=y
CONFIG_BGMAC_PLATFORM=y
CONFIG_SYSTEMPORT=y
CONFIG_BNXT=y
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
CONFIG_BNXT_HWMON=y
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=y
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MACB_PCI=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_THUNDER_NIC_PF=y
CONFIG_THUNDER_NIC_VF=y
CONFIG_THUNDER_NIC_BGX=y
CONFIG_THUNDER_NIC_RGX=y
CONFIG_CAVIUM_PTP=y
CONFIG_LIQUIDIO=y
CONFIG_LIQUIDIO_VF=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4_DCB=y
CONFIG_CHELSIO_T4_FCOE=y
CONFIG_CHELSIO_T4VF=y
CONFIG_CHELSIO_LIB=y
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_CRYPTO_DEV_CHELSIO_TLS=y
CONFIG_CHELSIO_IPSEC_INLINE=y
CONFIG_CHELSIO_TLS_DEVICE=y
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
CONFIG_EP93XX_ETH=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=y
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_GEMINI_ETHERNET=y
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9000=y
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
CONFIG_DM9051=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_ULI526X=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=y
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=y
CONFIG_TSNEP_SELFTESTS=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_FARADAY=y
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_GIANFAR=y
CONFIG_FSL_DPAA2_SWITCH=y
CONFIG_FSL_ENETC=y
CONFIG_FSL_ENETC_VF=y
CONFIG_FSL_ENETC_IERB=y
CONFIG_FSL_ENETC_MDIO=y
CONFIG_FSL_ENETC_PTP_CLOCK=y
CONFIG_FSL_ENETC_QOS=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_FUN_CORE=y
CONFIG_FUN_ETH=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HISILICON=y
CONFIG_HIX5HD2_GMAC=y
CONFIG_HISI_FEMAC=y
CONFIG_HIP04_ETH=y
CONFIG_HI13X1_GMAC=y
CONFIG_HNS_MDIO=y
CONFIG_HNS=y
CONFIG_HNS_DSAF=y
CONFIG_HNS_ENET=y
CONFIG_HNS3=y
CONFIG_HNS3_HCLGE=y
CONFIG_HNS3_DCB=y
CONFIG_HNS3_HCLGEVF=y
CONFIG_HNS3_ENET=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=y
CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=y
CONFIG_I40E_DCB=y
CONFIG_IAVF=y
CONFIG_I40EVF=y
CONFIG_ICE=y
CONFIG_ICE_SWITCHDEV=y
CONFIG_FM10K=y
CONFIG_IGC=y
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_NGBE=y
CONFIG_TXGBE=y
CONFIG_JME=y
CONFIG_KORINA=y
CONFIG_NET_VENDOR_ADI=y
CONFIG_ADIN1110=y
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MV643XX_ETH=y
CONFIG_MVMDIO=y
CONFIG_MVNETA=y
CONFIG_MVPP2=y
CONFIG_MVPP2_PTP=y
CONFIG_PXA168_ETH=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_OCTEONTX2_MBOX=y
CONFIG_OCTEONTX2_AF=y
CONFIG_NDC_DIS_DYNAMIC_CACHING=y
CONFIG_OCTEONTX2_PF=y
CONFIG_OCTEONTX2_VF=y
CONFIG_OCTEON_EP=y
CONFIG_PRESTERA=y
CONFIG_PRESTERA_PCI=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NET_MEDIATEK_SOC_WED=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_MEDIATEK_STAR_EMAC=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=y
CONFIG_MLX5_FPGA=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
CONFIG_MLX5_BRIDGE=y
CONFIG_MLX5_CLS_ACT=y
CONFIG_MLX5_TC_CT=y
CONFIG_MLX5_TC_SAMPLE=y
CONFIG_MLX5_CORE_EN_DCB=y
CONFIG_MLX5_CORE_IPOIB=y
CONFIG_MLX5_EN_MACSEC=y
CONFIG_MLX5_EN_IPSEC=y
CONFIG_MLX5_EN_TLS=y
CONFIG_MLX5_SW_STEERING=y
CONFIG_MLX5_SF=y
CONFIG_MLX5_SF_MANAGER=y
CONFIG_MLXSW_CORE=y
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=y
CONFIG_MLXSW_I2C=y
CONFIG_MLXSW_SPECTRUM=y
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_MINIMAL=y
CONFIG_MLXFW=y
CONFIG_MLXBF_GIGE=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=y
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_KSZ884X_PCI=y
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_ENCX24J600=y
CONFIG_LAN743X=y
CONFIG_LAN966X_SWITCH=y
CONFIG_SPARX5_SWITCH=y
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=y
CONFIG_MSCC_OCELOT_SWITCH=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=y
CONFIG_FEALNX=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=y
CONFIG_NS83820=y
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=y
CONFIG_NFP_APP_FLOWER=y
CONFIG_NFP_APP_ABM_NIC=y
CONFIG_NFP_DEBUG=y
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=y
CONFIG_AX88796=y
CONFIG_AX88796_93CX6=y
CONFIG_NE2K_PCI=y
CONFIG_PCMCIA_PCNET=y
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_LPC_ENET=y
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=y
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_IONIC=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
CONFIG_QLCNIC=y
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=y
CONFIG_QED=y
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=y
CONFIG_QED_RDMA=y
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=y
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=y
CONFIG_QCA7000_SPI=y
CONFIG_QCA7000_UART=y
CONFIG_QCOM_EMAC=y
CONFIG_RMNET=y
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_SH_ETH=y
CONFIG_RAVB=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=y
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=y
CONFIG_SIS190=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=y
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=y
CONFIG_SFC_FALCON_MTD=y
CONFIG_SFC_SIENA=y
CONFIG_SFC_SIENA_MTD=y
CONFIG_SFC_SIENA_MCDI_MON=y
CONFIG_SFC_SIENA_SRIOV=y
CONFIG_SFC_SIENA_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_EPIC100=y
CONFIG_SMC911X=y
CONFIG_SMSC911X=y
CONFIG_SMSC9420=y
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_SNI_AVE=y
CONFIG_SNI_NETSEC=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_SELFTESTS=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_DWMAC_DWC_QOS_ETH=y
CONFIG_DWMAC_GENERIC=y
CONFIG_DWMAC_ANARION=y
CONFIG_DWMAC_INGENIC=y
CONFIG_DWMAC_IPQ806X=y
CONFIG_DWMAC_LPC18XX=y
CONFIG_DWMAC_MEDIATEK=y
CONFIG_DWMAC_MESON=y
CONFIG_DWMAC_OXNAS=y
CONFIG_DWMAC_QCOM_ETHQOS=y
CONFIG_DWMAC_ROCKCHIP=y
CONFIG_DWMAC_SOCFPGA=y
CONFIG_DWMAC_STI=y
CONFIG_DWMAC_STM32=y
CONFIG_DWMAC_SUNXI=y
CONFIG_DWMAC_SUN8I=y
CONFIG_DWMAC_IMX8=y
CONFIG_DWMAC_INTEL_PLAT=y
CONFIG_DWMAC_VISCONTI=y
CONFIG_DWMAC_LOONGSON=y
CONFIG_STMMAC_PCI=y
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NIU=y
CONFIG_NET_VENDOR_SUNPLUS=y
CONFIG_SP7021_EMAC=y
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=y
CONFIG_DWC_XLGMAC_PCI=y
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=y
CONFIG_NET_VENDOR_TI=y
CONFIG_TI_DAVINCI_EMAC=y
CONFIG_TI_DAVINCI_MDIO=y
CONFIG_TI_CPSW_PHY_SEL=y
CONFIG_TI_CPSW=y
CONFIG_TI_CPSW_SWITCHDEV=y
CONFIG_TI_CPTS=y
CONFIG_TLAN=y
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_MSE102X=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=y
CONFIG_WIZNET_W5300=y
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=y
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=y
CONFIG_XILINX_AXI_EMAC=y
CONFIG_XILINX_LL_TEMAC=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_SKFP=y
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_QCOM_IPA=y
CONFIG_NET_SB1000=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SFP=y
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
CONFIG_MESON_GXL_PHY=y
CONFIG_ADIN_PHY=y
CONFIG_ADIN1100_PHY=y
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM54140_PHY=y
CONFIG_BCM63XX_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM84881_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_BCM_CYGNUS_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_NET_PHYPTP=y
CONFIG_CICADA_PHY=y
CONFIG_CORTINA_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_LXT_PHY=y
CONFIG_INTEL_XWAY_PHY=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
CONFIG_MARVELL_88X2222_PHY=y
CONFIG_MAXLINEAR_GPHY=y
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
CONFIG_MICROCHIP_T1_PHY=y
CONFIG_MICROSEMI_PHY=y
CONFIG_MOTORCOMM_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_NXP_C45_TJA11XX_PHY=y
CONFIG_NXP_TJA11XX_PHY=y
CONFIG_AT803X_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
CONFIG_TERANETICS_PHY=y
CONFIG_DP83822_PHY=y
CONFIG_DP83TC811_PHY=y
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
CONFIG_DP83869_PHY=y
CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
CONFIG_MICREL_KS8995MA=y
CONFIG_PSE_CONTROLLER=y
CONFIG_PSE_REGULATOR=y
CONFIG_CAN_DEV=y
CONFIG_CAN_VCAN=y
CONFIG_CAN_VXCAN=y
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
CONFIG_CAN_AT91=y
CONFIG_CAN_CAN327=y
CONFIG_CAN_FLEXCAN=y
CONFIG_CAN_GRCAN=y
CONFIG_CAN_JANZ_ICAN3=y
CONFIG_CAN_KVASER_PCIEFD=y
CONFIG_CAN_SLCAN=y
CONFIG_CAN_SUN4I=y
CONFIG_CAN_XILINXCAN=y
CONFIG_PCH_CAN=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_C_CAN_PCI=y
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y
CONFIG_CAN_CTUCANFD=y
CONFIG_CAN_CTUCANFD_PCI=y
CONFIG_CAN_CTUCANFD_PLATFORM=y
CONFIG_CAN_IFI_CANFD=y
CONFIG_CAN_M_CAN=y
CONFIG_CAN_M_CAN_PCI=y
CONFIG_CAN_M_CAN_PLATFORM=y
CONFIG_CAN_M_CAN_TCAN4X5X=y
CONFIG_CAN_PEAK_PCIEFD=y
CONFIG_CAN_RCAR=y
CONFIG_CAN_RCAR_CANFD=y
CONFIG_CAN_SJA1000=y
CONFIG_CAN_EMS_PCI=y
CONFIG_CAN_EMS_PCMCIA=y
CONFIG_CAN_F81601=y
CONFIG_CAN_KVASER_PCI=y
CONFIG_CAN_PEAK_PCI=y
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PEAK_PCMCIA=y
CONFIG_CAN_PLX_PCI=y
CONFIG_CAN_SJA1000_ISA=y
CONFIG_CAN_SJA1000_PLATFORM=y
CONFIG_CAN_SOFTING=y
CONFIG_CAN_SOFTING_CS=y
#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=y
CONFIG_CAN_MCP251X=y
CONFIG_CAN_MCP251XFD=y
CONFIG_CAN_MCP251XFD_SANITY=y
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=y
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB=y
CONFIG_CAN_ETAS_ES58X=y
CONFIG_CAN_GS_USB=y
CONFIG_CAN_KVASER_USB=y
CONFIG_CAN_MCBA_USB=y
CONFIG_CAN_PEAK_USB=y
CONFIG_CAN_UCAN=y
# end of CAN USB interfaces
CONFIG_CAN_DEBUG_DEVICES=y
#
# MCTP Device Drivers
#
CONFIG_MCTP_SERIAL=y
CONFIG_MCTP_TRANSPORT_I2C=y
# end of MCTP Device Drivers
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_SUN4I=y
CONFIG_MDIO_XGENE=y
CONFIG_MDIO_ASPEED=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BCM_IPROC=y
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_CAVIUM=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_HISI_FEMAC=y
CONFIG_MDIO_I2C=y
CONFIG_MDIO_MVUSB=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MDIO_MOXART=y
CONFIG_MDIO_OCTEON=y
CONFIG_MDIO_IPQ4019=y
CONFIG_MDIO_IPQ8064=y
CONFIG_MDIO_THUNDER=y
#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_MESON_G12A=y
CONFIG_MDIO_BUS_MUX_BCM6368=y
CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
#
# PCS device drivers
#
CONFIG_PCS_XPCS=y
CONFIG_PCS_LYNX=y
CONFIG_PCS_RZN1_MIIC=y
CONFIG_PCS_ALTERA_TSE=y
# end of PCS device drivers
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=y
CONFIG_PPPOE=y
CONFIG_PPTP=y
CONFIG_PPPOL2TP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_HUAWEI_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SR9700=y
CONFIG_USB_NET_SR9800=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_CDC_PHONET=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_USB_NET_CH9200=y
CONFIG_USB_NET_AQC111=y
CONFIG_USB_RTL8153_ECM=y
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=y
CONFIG_ATH_COMMON=y
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_CERT_TESTING=y
CONFIG_ATH5K=y
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K_PCI=y
CONFIG_ATH5K_TEST_CHANNELS=y
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_DFS_DEBUGFS=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
CONFIG_ATH9K_TX99=y
CONFIG_ATH9K_DFS_CERTIFIED=y
CONFIG_ATH9K_DYNACK=y
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_PCI_NO_EEPROM=y
CONFIG_ATH9K_HTC=y
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_ATH9K_HWRNG=y
CONFIG_ATH9K_COMMON_SPECTRAL=y
CONFIG_CARL9170=y
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=y
CONFIG_ATH6KL_SDIO=y
CONFIG_ATH6KL_USB=y
CONFIG_ATH6KL_DEBUG=y
CONFIG_ATH6KL_REGDOMAIN=y
CONFIG_AR5523=y
CONFIG_WIL6210=y
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_DEBUGFS=y
CONFIG_ATH10K=y
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=y
CONFIG_ATH10K_AHB=y
CONFIG_ATH10K_SDIO=y
CONFIG_ATH10K_USB=y
CONFIG_ATH10K_SNOC=y
CONFIG_ATH10K_DEBUG=y
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_SPECTRAL=y
CONFIG_ATH10K_DFS_CERTIFIED=y
CONFIG_WCN36XX=y
CONFIG_WCN36XX_DEBUGFS=y
CONFIG_ATH11K=y
CONFIG_ATH11K_AHB=y
CONFIG_ATH11K_PCI=y
CONFIG_ATH11K_DEBUG=y
CONFIG_ATH11K_DEBUGFS=y
CONFIG_ATH11K_SPECTRAL=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_AT76C50X_USB=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=y
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=y
CONFIG_BRCMSMAC=y
CONFIG_BRCMSMAC_LEDS=y
CONFIG_BRCMFMAC=y
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO_CS=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=y
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLEGACY=y
CONFIG_IWL4965=y
CONFIG_IWL3945=y
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
# end of iwl3945 / iwl4965 Debugging Options
CONFIG_IWLWIFI=y
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=y
CONFIG_IWLMVM=y
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
# end of Debugging Options
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=y
CONFIG_HOSTAP_PCI=y
CONFIG_HOSTAP_CS=y
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_NORTEL_HERMES=y
CONFIG_PCI_HERMES=y
CONFIG_PCMCIA_HERMES=y
CONFIG_PCMCIA_SPECTRUM=y
CONFIG_ORINOCO_USB=y
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_PCI=y
CONFIG_P54_SPI=y
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_CS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_SPI=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_LIBERTAS_THINFIRM_USB=y
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
CONFIG_MWIFIEX_PCIE=y
CONFIG_MWIFIEX_USB=y
CONFIG_MWL8K=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=y
CONFIG_MT76_CORE=y
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=y
CONFIG_MT76_SDIO=y
CONFIG_MT76x02_LIB=y
CONFIG_MT76x02_USB=y
CONFIG_MT76_CONNAC_LIB=y
CONFIG_MT76x0_COMMON=y
CONFIG_MT76x0U=y
CONFIG_MT76x0E=y
CONFIG_MT76x2_COMMON=y
CONFIG_MT76x2E=y
CONFIG_MT76x2U=y
CONFIG_MT7603E=y
CONFIG_MT7615_COMMON=y
CONFIG_MT7615E=y
CONFIG_MT7622_WMAC=y
CONFIG_MT7663_USB_SDIO_COMMON=y
CONFIG_MT7663U=y
CONFIG_MT7663S=y
CONFIG_MT7915E=y
CONFIG_MT7986_WMAC=y
CONFIG_MT7921_COMMON=y
CONFIG_MT7921E=y
CONFIG_MT7921S=y
CONFIG_MT7921U=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=y
CONFIG_WILC1000_SDIO=y
CONFIG_WILC1000_SPI=y
CONFIG_WILC1000_HW_OOB_INTR=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_PLFXLC=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=y
CONFIG_RT2400PCI=y
CONFIG_RT2500PCI=y
CONFIG_RT61PCI=y
CONFIG_RT2800PCI=y
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=y
CONFIG_RT73USB=y
CONFIG_RT2800USB=y
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=y
CONFIG_RT2800_LIB_MMIO=y
CONFIG_RT2X00_LIB_MMIO=y
CONFIG_RT2X00_LIB_PCI=y
CONFIG_RT2X00_LIB_USB=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00_DEBUG=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=y
CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=y
CONFIG_RTL8192CE=y
CONFIG_RTL8192SE=y
CONFIG_RTL8192DE=y
CONFIG_RTL8723AE=y
CONFIG_RTL8723BE=y
CONFIG_RTL8188EE=y
CONFIG_RTL8192EE=y
CONFIG_RTL8821AE=y
CONFIG_RTL8192CU=y
CONFIG_RTLWIFI=y
CONFIG_RTLWIFI_PCI=y
CONFIG_RTLWIFI_USB=y
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=y
CONFIG_RTL8723_COMMON=y
CONFIG_RTLBTCOEXIST=y
CONFIG_RTL8XXXU=y
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=y
CONFIG_RTW88_CORE=y
CONFIG_RTW88_PCI=y
CONFIG_RTW88_8822B=y
CONFIG_RTW88_8822C=y
CONFIG_RTW88_8723D=y
CONFIG_RTW88_8821C=y
CONFIG_RTW88_8822BE=y
CONFIG_RTW88_8822CE=y
CONFIG_RTW88_8723DE=y
CONFIG_RTW88_8821CE=y
CONFIG_RTW88_DEBUG=y
CONFIG_RTW88_DEBUGFS=y
CONFIG_RTW89=y
CONFIG_RTW89_CORE=y
CONFIG_RTW89_PCI=y
CONFIG_RTW89_8852A=y
CONFIG_RTW89_8852C=y
CONFIG_RTW89_8852AE=y
CONFIG_RTW89_8852CE=y
CONFIG_RTW89_DEBUG=y
CONFIG_RTW89_DEBUGMSG=y
CONFIG_RTW89_DEBUGFS=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=y
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=y
CONFIG_RSI_USB=y
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WFX=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y
CONFIG_CW1200_WLAN_SPI=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=y
CONFIG_WL1251_SPI=y
CONFIG_WL1251_SDIO=y
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SPI=y
CONFIG_WLCORE_SDIO=y
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=y
CONFIG_ZD1211RW=y
CONFIG_ZD1211RW_DEBUG=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_QTNFMAC=y
CONFIG_QTNFMAC_PCIE=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_MAC80211_HWSIM=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_VIRT_WIFI=y
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
CONFIG_PC300TOO=y
CONFIG_FARSYNC=y
CONFIG_FSL_UCC_HDLC=y
CONFIG_SLIC_DS26522=y
CONFIG_LAPBETHER=y
CONFIG_IEEE802154_DRIVERS=y
CONFIG_IEEE802154_FAKELB=y
CONFIG_IEEE802154_AT86RF230=y
CONFIG_IEEE802154_MRF24J40=y
CONFIG_IEEE802154_CC2520=y
CONFIG_IEEE802154_ATUSB=y
CONFIG_IEEE802154_ADF7242=y
CONFIG_IEEE802154_CA8210=y
CONFIG_IEEE802154_CA8210_DEBUGFS=y
CONFIG_IEEE802154_MCR20A=y
CONFIG_IEEE802154_HWSIM=y
#
# Wireless WAN
#
CONFIG_WWAN=y
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=y
CONFIG_MHI_WWAN_CTRL=y
CONFIG_MHI_WWAN_MBIM=y
CONFIG_QCOM_BAM_DMUX=y
CONFIG_RPMSG_WWAN_CTRL=y
CONFIG_IOSM=y
CONFIG_MTK_T7XX=y
# end of Wireless WAN
CONFIG_VMXNET3=y
CONFIG_FUJITSU_ES=y
CONFIG_USB4_NET=y
CONFIG_NETDEVSIM=y
CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=y
CONFIG_MISDN_HFCMULTI=y
CONFIG_MISDN_HFCUSB=y
CONFIG_MISDN_AVMFRITZ=y
CONFIG_MISDN_SPEEDFAX=y
CONFIG_MISDN_INFINEON=y
CONFIG_MISDN_W6692=y
CONFIG_MISDN_NETJET=y
CONFIG_MISDN_HDLC=y
CONFIG_MISDN_IPAC=y
CONFIG_MISDN_ISAR=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_APPLESPI=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_CLPS711X=y
CONFIG_KEYBOARD_DLINK_DIR685=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_EP93XX=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_SNVS_PWRKEY=y
CONFIG_KEYBOARD_IMX=y
CONFIG_KEYBOARD_IMX_SC_KEY=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_PINEPHONE=y
CONFIG_KEYBOARD_PMIC8XXX=y
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_SH_KEYSC=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_IQS62X=y
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_CAP11XX=y
CONFIG_KEYBOARD_BCM=y
CONFIG_KEYBOARD_MT6779=y
CONFIG_KEYBOARD_MTK_PMIC=y
CONFIG_KEYBOARD_CYPRESS_SF=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADC=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_PSXPAD_SPI=y
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=y
CONFIG_JOYSTICK_QWIIC=y
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_JOYSTICK_SENSEHAT=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_ADC=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=y
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=y
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
CONFIG_TOUCHSCREEN_HYCON_HY46XX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_ILITEK=y
CONFIG_TOUCHSCREEN_IPROC=y
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MSG2638=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMAGIS=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=y
CONFIG_TOUCHSCREEN_MIGOR=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MXS_LRADC=y
CONFIG_TOUCHSCREEN_MX25=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TS4800=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=y
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_TOUCHSCREEN_SUR40=y
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
CONFIG_TOUCHSCREEN_IQS5XX=y
CONFIG_TOUCHSCREEN_ZINITIX=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_ARIEL_PWRBUTTON=y
CONFIG_INPUT_ARIZONA_HAPTICS=y
CONFIG_INPUT_ATC260X_ONKEY=y
CONFIG_INPUT_ATMEL_CAPTOUCH=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_PM8941_PWRKEY=y
CONFIG_INPUT_PM8XXX_VIBRATOR=y
CONFIG_INPUT_PMIC8XXX_PWRKEY=y
CONFIG_INPUT_MAX77650_ONKEY=y
CONFIG_INPUT_MAX77693_HAPTIC=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_INPUT_CPCAP_PWRBUTTON=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_PWM_VIBRA=y
CONFIG_INPUT_RK805_PWRKEY=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_ADXL34X_SPI=y
CONFIG_INPUT_IBM_PANEL=y
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_IQS269A=y
CONFIG_INPUT_IQS626A=y
CONFIG_INPUT_IQS7222=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y
CONFIG_INPUT_SOC_BUTTON_ARRAY=y
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_INPUT_HISI_POWERKEY=y
CONFIG_INPUT_RAVE_SP_PWRBUTTON=y
CONFIG_INPUT_SC27XX_VIBRA=y
CONFIG_INPUT_RT5120_PWRKEY=y
CONFIG_INPUT_STPMIC1_ONKEY=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SPI=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_MEN_MCB=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_ASPEED_VUART=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_IOC3=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_OMAP=y
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y
CONFIG_SERIAL_8250_LPC18XX=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_UNIPHIER=y
CONFIG_SERIAL_8250_INGENIC=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
CONFIG_SERIAL_8250_PXA=y
CONFIG_SERIAL_8250_TEGRA=y
CONFIG_SERIAL_8250_BCM7271=y
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
CONFIG_SERIAL_ATMEL_TTYAT=y
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_TEGRA_TCU=y
CONFIG_SERIAL_TEGRA_TCU_CONSOLE=y
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_IMX_EARLYCON=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_EARLYCON=y
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_HS_LPC32XX=y
CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_ICOM=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_QCOM_GENI=y
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
CONFIG_SERIAL_LANTIQ=y
CONFIG_SERIAL_LANTIQ_CONSOLE=y
CONFIG_SERIAL_QE=y
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
CONFIG_SERIAL_MXS_AUART=y
CONFIG_SERIAL_MXS_AUART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
CONFIG_SERIAL_OWL=y
CONFIG_SERIAL_OWL_CONSOLE=y
CONFIG_SERIAL_RDA=y
CONFIG_SERIAL_RDA_CONSOLE=y
CONFIG_SERIAL_MILBEAUT_USIO=y
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE=y
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
CONFIG_SERIAL_SUNPLUS=y
CONFIG_SERIAL_SUNPLUS_CONSOLE=y
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_N_GSM=y
CONFIG_NOZOMI=y
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
CONFIG_NPCM7XX_KCS_IPMI_BMC=y
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
CONFIG_IPMI_KCS_BMC_SERIO=y
CONFIG_ASPEED_BT_IPMI_BMC=y
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_POLARFIRE_SOC=y
CONFIG_HW_RANDOM_MESON=y
CONFIG_HW_RANDOM_MTK=y
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_NPCM=y
CONFIG_HW_RANDOM_KEYSTONE=y
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_HW_RANDOM_CN10K=y
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_SCR24X=y
CONFIG_IPWIRELESS=y
# end of PCMCIA character devices
CONFIG_DEVMEM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C=y
CONFIG_TCG_TIS_SYNQUACER=y
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_PCIE=y
CONFIG_XILLYBUS_OF=y
CONFIG_XILLYUSB=y
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_AMD_MP2=y
CONFIG_I2C_HIX5HD2=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_CHT_WC=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=y
CONFIG_I2C_ASPEED=y
CONFIG_I2C_AT91=y
CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL=y
CONFIG_I2C_AXXIA=y
CONFIG_I2C_BCM2835=y
CONFIG_I2C_BCM_IPROC=y
CONFIG_I2C_BCM_KONA=y
CONFIG_I2C_BRCMSTB=y
CONFIG_I2C_CADENCE=y
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DAVINCI=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_DIGICOLOR=y
CONFIG_I2C_EG20T=y
CONFIG_I2C_EMEV2=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_HIGHLANDER=y
CONFIG_I2C_HISI=y
CONFIG_I2C_IMG=y
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_IOP3XX=y
CONFIG_I2C_JZ4780=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_LPC2K=y
CONFIG_I2C_MESON=y
CONFIG_I2C_MICROCHIP_CORE=y
CONFIG_I2C_MT65XX=y
CONFIG_I2C_MT7621=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_MXS=y
CONFIG_I2C_NPCM=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
CONFIG_I2C_APPLE=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PNX=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_QCOM_CCI=y
CONFIG_I2C_QCOM_GENI=y
CONFIG_I2C_QUP=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_RK3X=y
CONFIG_I2C_RZV2M=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_SPRD=y
CONFIG_I2C_ST=y
CONFIG_I2C_STM32F4=y
CONFIG_I2C_STM32F7=y
CONFIG_I2C_SUN6I_P2WI=y
CONFIG_I2C_SYNQUACER=y
CONFIG_I2C_TEGRA_BPMP=y
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_VERSATILE=y
CONFIG_I2C_WMT=y
CONFIG_I2C_THUNDERX=y
CONFIG_I2C_XILINX=y
CONFIG_I2C_XLP9XX=y
CONFIG_I2C_RCAR=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
CONFIG_I2C_CP2615=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PCI1XXXX=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
CONFIG_SVC_I3C_MASTER=y
CONFIG_MIPI_I3C_HCI=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ALTERA_CORE=y
CONFIG_SPI_ALTERA_DFL=y
CONFIG_SPI_AR934X=y
CONFIG_SPI_ATH79=y
CONFIG_SPI_ARMADA_3700=y
CONFIG_SPI_ASPEED_SMC=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_AT91_USART=y
CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM2835AUX=y
CONFIG_SPI_BCM63XX=y
CONFIG_SPI_BCM63XX_HSSPI=y
CONFIG_SPI_BCM_QSPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
CONFIG_SPI_CADENCE=y
CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_SPI_CADENCE_XSPI=y
CONFIG_SPI_CLPS711X=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_PCI=y
CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_DW_BT1=y
CONFIG_SPI_DW_BT1_DIRMAP=y
CONFIG_SPI_DLN2=y
CONFIG_SPI_EP93XX=y
CONFIG_SPI_FSI=y
CONFIG_SPI_FSL_LPSPI=y
CONFIG_SPI_FSL_QUADSPI=y
CONFIG_SPI_GXP=y
CONFIG_SPI_HISI_KUNPENG=y
CONFIG_SPI_HISI_SFC_V3XX=y
CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_IMG_SPFI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_INGENIC=y
CONFIG_SPI_INTEL=y
CONFIG_SPI_INTEL_PCI=y
CONFIG_SPI_INTEL_PLATFORM=y
CONFIG_SPI_JCORE=y
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_LP8841_RTC=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_DSPI=y
CONFIG_SPI_MESON_SPICC=y
CONFIG_SPI_MESON_SPIFC=y
CONFIG_SPI_MICROCHIP_CORE=y
CONFIG_SPI_MICROCHIP_CORE_QSPI=y
CONFIG_SPI_MT65XX=y
CONFIG_SPI_MT7621=y
CONFIG_SPI_MTK_NOR=y
CONFIG_SPI_MTK_SNFI=y
CONFIG_SPI_NPCM_FIU=y
CONFIG_SPI_NPCM_PSPI=y
CONFIG_SPI_LANTIQ_SSC=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_TI_QSPI=y
CONFIG_SPI_OMAP_100K=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PIC32=y
CONFIG_SPI_PIC32_SQI=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_ROCKCHIP_SFC=y
CONFIG_SPI_RPCIF=y
CONFIG_SPI_RSPI=y
CONFIG_SPI_QUP=y
CONFIG_SPI_QCOM_GENI=y
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_SH_MSIOF=y
CONFIG_SPI_SH=y
CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIFIVE=y
CONFIG_SPI_SLAVE_MT27XX=y
CONFIG_SPI_SPRD=y
CONFIG_SPI_SPRD_ADI=y
CONFIG_SPI_STM32=y
CONFIG_SPI_STM32_QSPI=y
CONFIG_SPI_ST_SSC4=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
CONFIG_SPI_SUNPLUS_SP7021=y
CONFIG_SPI_SYNQUACER=y
CONFIG_SPI_MXIC=y
CONFIG_SPI_TEGRA210_QUAD=y
CONFIG_SPI_TEGRA114=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_SPI_THUNDERX=y
CONFIG_SPI_TOPCLIFF_PCH=y
CONFIG_SPI_UNIPHIER=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_XLP=y
CONFIG_SPI_XTENSA_XTFPGA=y
CONFIG_SPI_ZYNQ_QSPI=y
CONFIG_SPI_ZYNQMP_GQSPI=y
CONFIG_SPI_AMD=y
#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=y
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=y
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_SPMI_MTK_PMIF=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
CONFIG_NTP_PPS=y
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
CONFIG_PTP_1588_CLOCK_QORIQ=y
CONFIG_DP83640_PHY=y
CONFIG_PTP_1588_CLOCK_INES=y
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_PTP_1588_CLOCK_IDT82P33=y
CONFIG_PTP_1588_CLOCK_IDTCM=y
CONFIG_PTP_1588_CLOCK_OCP=y
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_AT91PIO4=y
CONFIG_PINCTRL_AXP209=y
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_CY8C95X0=y
CONFIG_PINCTRL_DA850_PUPD=y
CONFIG_PINCTRL_DA9062=y
CONFIG_PINCTRL_EQUILIBRIUM=y
CONFIG_PINCTRL_INGENIC=y
CONFIG_PINCTRL_LPC18XX=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08_SPI=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_PISTACHIO=y
CONFIG_PINCTRL_RK805=y
CONFIG_PINCTRL_ROCKCHIP=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
CONFIG_PINCTRL_S700=y
CONFIG_PINCTRL_S900=y
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
CONFIG_PINCTRL_ASPEED_G5=y
CONFIG_PINCTRL_ASPEED_G6=y
CONFIG_PINCTRL_BCM281XX=y
CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_BCM4908=y
CONFIG_PINCTRL_BCM63XX=y
CONFIG_PINCTRL_BCM6318=y
CONFIG_PINCTRL_BCM6328=y
CONFIG_PINCTRL_BCM6358=y
CONFIG_PINCTRL_BCM6362=y
CONFIG_PINCTRL_BCM6368=y
CONFIG_PINCTRL_BCM63268=y
CONFIG_PINCTRL_IPROC_GPIO=y
CONFIG_PINCTRL_CYGNUS_MUX=y
CONFIG_PINCTRL_NS=y
CONFIG_PINCTRL_NSP_GPIO=y
CONFIG_PINCTRL_NS2_MUX=y
CONFIG_PINCTRL_NSP_MUX=y
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
CONFIG_PINCTRL_BERLIN_BG4CT=y
CONFIG_PINCTRL_LOCHNAGAR=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX8MM=y
CONFIG_PINCTRL_IMX8MN=y
CONFIG_PINCTRL_IMX8MP=y
CONFIG_PINCTRL_IMX8MQ=y
#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_LYNXPOINT=y
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_ALDERLAKE=y
CONFIG_PINCTRL_BROXTON=y
CONFIG_PINCTRL_CANNONLAKE=y
CONFIG_PINCTRL_CEDARFORK=y
CONFIG_PINCTRL_DENVERTON=y
CONFIG_PINCTRL_ELKHARTLAKE=y
CONFIG_PINCTRL_EMMITSBURG=y
CONFIG_PINCTRL_GEMINILAKE=y
CONFIG_PINCTRL_ICELAKE=y
CONFIG_PINCTRL_JASPERLAKE=y
CONFIG_PINCTRL_LAKEFIELD=y
CONFIG_PINCTRL_LEWISBURG=y
CONFIG_PINCTRL_METEORLAKE=y
CONFIG_PINCTRL_SUNRISEPOINT=y
CONFIG_PINCTRL_TIGERLAKE=y
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
CONFIG_PINCTRL_MT8135=y
CONFIG_PINCTRL_MT8127=y
CONFIG_PINCTRL_MT2712=y
CONFIG_PINCTRL_MT6765=y
CONFIG_PINCTRL_MT6779=y
CONFIG_PINCTRL_MT6795=y
CONFIG_PINCTRL_MT6797=y
CONFIG_PINCTRL_MT7622=y
CONFIG_PINCTRL_MT7986=y
CONFIG_PINCTRL_MT8167=y
CONFIG_PINCTRL_MT8173=y
CONFIG_PINCTRL_MT8183=y
CONFIG_PINCTRL_MT8186=y
CONFIG_PINCTRL_MT8188=y
CONFIG_PINCTRL_MT8192=y
CONFIG_PINCTRL_MT8195=y
CONFIG_PINCTRL_MT8365=y
CONFIG_PINCTRL_MT8516=y
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_WPCM450=y
CONFIG_PINCTRL_NPCM7XX=y
CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=y
CONFIG_PINCTRL_PXA27X=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_PINCTRL_IPQ4019=y
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_IPQ6018=y
CONFIG_PINCTRL_MSM8226=y
CONFIG_PINCTRL_MSM8660=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MDM9607=y
CONFIG_PINCTRL_MDM9615=y
CONFIG_PINCTRL_MSM8X74=y
CONFIG_PINCTRL_MSM8909=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8953=y
CONFIG_PINCTRL_MSM8976=y
CONFIG_PINCTRL_MSM8994=y
CONFIG_PINCTRL_MSM8996=y
CONFIG_PINCTRL_MSM8998=y
CONFIG_PINCTRL_QCM2290=y
CONFIG_PINCTRL_QCS404=y
CONFIG_PINCTRL_QDF2XXX=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC7280_LPASS_LPI=y
CONFIG_PINCTRL_SC8180X=y
CONFIG_PINCTRL_SC8280XP=y
CONFIG_PINCTRL_SDM660=y
CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SDX55=y
CONFIG_PINCTRL_SM6115=y
CONFIG_PINCTRL_SM6125=y
CONFIG_PINCTRL_SM6350=y
CONFIG_PINCTRL_SM6375=y
CONFIG_PINCTRL_SDX65=y
CONFIG_PINCTRL_SM8150=y
CONFIG_PINCTRL_SM8250=y
CONFIG_PINCTRL_SM8250_LPASS_LPI=y
CONFIG_PINCTRL_SM8350=y
CONFIG_PINCTRL_SM8450=y
CONFIG_PINCTRL_SM8450_LPASS_LPI=y
CONFIG_PINCTRL_SC8280XP_LPASS_LPI=y
CONFIG_PINCTRL_LPASS_LPI=y
#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
CONFIG_PINCTRL_PFC_R8A7779=y
CONFIG_PINCTRL_PFC_R8A7790=y
CONFIG_PINCTRL_PFC_R8A77950=y
CONFIG_PINCTRL_PFC_R8A77951=y
CONFIG_PINCTRL_PFC_R8A7778=y
CONFIG_PINCTRL_PFC_R8A7793=y
CONFIG_PINCTRL_PFC_R8A7791=y
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
CONFIG_PINCTRL_PFC_R8A77961=y
CONFIG_PINCTRL_PFC_R8A779F0=y
CONFIG_PINCTRL_PFC_R8A7792=y
CONFIG_PINCTRL_PFC_R8A77980=y
CONFIG_PINCTRL_PFC_R8A77970=y
CONFIG_PINCTRL_PFC_R8A779A0=y
CONFIG_PINCTRL_PFC_R8A779G0=y
CONFIG_PINCTRL_PFC_R8A7740=y
CONFIG_PINCTRL_PFC_R8A73A4=y
CONFIG_PINCTRL_RZA1=y
CONFIG_PINCTRL_RZA2=y
CONFIG_PINCTRL_RZG2L=y
CONFIG_PINCTRL_PFC_R8A77470=y
CONFIG_PINCTRL_PFC_R8A7745=y
CONFIG_PINCTRL_PFC_R8A7742=y
CONFIG_PINCTRL_PFC_R8A7743=y
CONFIG_PINCTRL_PFC_R8A7744=y
CONFIG_PINCTRL_PFC_R8A774C0=y
CONFIG_PINCTRL_PFC_R8A774E1=y
CONFIG_PINCTRL_PFC_R8A774A1=y
CONFIG_PINCTRL_PFC_R8A774B1=y
CONFIG_PINCTRL_RZN1=y
CONFIG_PINCTRL_RZV2M=y
CONFIG_PINCTRL_PFC_SH7203=y
CONFIG_PINCTRL_PFC_SH7264=y
CONFIG_PINCTRL_PFC_SH7269=y
CONFIG_PINCTRL_PFC_SH7720=y
CONFIG_PINCTRL_PFC_SH7722=y
CONFIG_PINCTRL_PFC_SH7734=y
CONFIG_PINCTRL_PFC_SH7757=y
CONFIG_PINCTRL_PFC_SH7785=y
CONFIG_PINCTRL_PFC_SH7786=y
CONFIG_PINCTRL_PFC_SH73A0=y
CONFIG_PINCTRL_PFC_SH7723=y
CONFIG_PINCTRL_PFC_SH7724=y
CONFIG_PINCTRL_PFC_SHX3=y
# end of Renesas pinctrl drivers
CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
CONFIG_PINCTRL_EXYNOS_ARM=y
CONFIG_PINCTRL_EXYNOS_ARM64=y
CONFIG_PINCTRL_S3C24XX=y
CONFIG_PINCTRL_S3C64XX=y
CONFIG_PINCTRL_SPRD=y
CONFIG_PINCTRL_SPRD_SC9860=y
CONFIG_PINCTRL_STARFIVE_JH7100=y
CONFIG_PINCTRL_STM32=y
CONFIG_PINCTRL_STM32F429=y
CONFIG_PINCTRL_STM32F469=y
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
CONFIG_PINCTRL_STM32H743=y
CONFIG_PINCTRL_STM32MP135=y
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_TI_IODELAY=y
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
CONFIG_PINCTRL_UNIPHIER_SLD8=y
CONFIG_PINCTRL_UNIPHIER_PRO5=y
CONFIG_PINCTRL_UNIPHIER_PXS2=y
CONFIG_PINCTRL_UNIPHIER_LD6B=y
CONFIG_PINCTRL_UNIPHIER_LD11=y
CONFIG_PINCTRL_UNIPHIER_LD20=y
CONFIG_PINCTRL_UNIPHIER_PXS3=y
CONFIG_PINCTRL_UNIPHIER_NX1=y
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_AMDPT=y
CONFIG_GPIO_ASPEED=y
CONFIG_GPIO_ASPEED_SGPIO=y
CONFIG_GPIO_ATH79=y
CONFIG_GPIO_RASPBERRYPI_EXP=y
CONFIG_GPIO_BCM_KONA=y
CONFIG_GPIO_BCM_XGS_IPROC=y
CONFIG_GPIO_BRCMSTB=y
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_CLPS711X=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EIC_SPRD=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_EXAR=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HISI=y
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_IMX_SCU=y
CONFIG_GPIO_IOP=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_LPC18XX=y
CONFIG_GPIO_LPC32XX=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_GPIO_MT7621=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PMIC_EIC_SPRD=y
CONFIG_GPIO_PXA=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_RDA=y
CONFIG_GPIO_ROCKCHIP=y
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SNPS_CREG=y
CONFIG_GPIO_SPRD=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TEGRA=y
CONFIG_GPIO_TEGRA186=y
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_THUNDERX=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_VISCONTI=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_WCD934X=y
CONFIG_GPIO_XGENE_SB=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_XLP=y
CONFIG_GPIO_AMD_FCH=y
CONFIG_GPIO_IDT3243X=y
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
CONFIG_GPIO_TS4900=y
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_BD71815=y
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_BD9571MWV=y
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_MAX77650=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SL28CPLD=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TQMX86=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_UCB1400=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_MLXBF=y
CONFIG_GPIO_MLXBF2=y
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_PCH=y
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=y
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX3191X=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
CONFIG_GPIO_XRA1403=y
CONFIG_GPIO_MOXTET=y
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_ATC260X=y
CONFIG_POWER_RESET_BRCMKONA=y
CONFIG_POWER_RESET_BRCMSTB=y
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_LINKSTATION=y
CONFIG_POWER_RESET_OCELOT_RESET=y
CONFIG_POWER_RESET_PIIX4_POWEROFF=y
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_REGULATOR=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
CONFIG_POWER_RESET_SC27XX=y
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_MLXBF=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_IP5XXX_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CPCAP=y
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_LEGO_EV3=y
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_INGENIC=y
CONFIG_BATTERY_WM97XX=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_DA9052=y
CONFIG_CHARGER_DA9150=y
CONFIG_BATTERY_DA9150=y
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
CONFIG_AXP20X_POWER=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_BATTERY_TWL4030_MADC=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_BATTERY_RX51=y
CONFIG_CHARGER_CPCAP=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77650=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_MP2629=y
CONFIG_CHARGER_MT6360=y
CONFIG_CHARGER_MT6370=y
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=y
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_RK817=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_CROS_USBPD=y
CONFIG_CHARGER_CROS_PCHG=y
CONFIG_CHARGER_SC2731=y
CONFIG_FUEL_GAUGE_SC27XX=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=y
CONFIG_CHARGER_WILCO=y
CONFIG_RN5T618_POWER=y
CONFIG_BATTERY_ACER_A500=y
CONFIG_BATTERY_SURFACE=y
CONFIG_CHARGER_SURFACE=y
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_ARM_SCMI=y
CONFIG_SENSORS_ARM_SCPI=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_BT1_PVT=y
CONFIG_SENSORS_BT1_PVT_ALARMS=y
CONFIG_SENSORS_CORSAIR_CPRO=y
CONFIG_SENSORS_CORSAIR_PSU=y
CONFIG_SENSORS_DRIVETEMP=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_SPARX5=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_GSC=y
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_FTSTEUTATES=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LAN966X=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2947_SPI=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
CONFIG_SENSORS_MAX31730=y
CONFIG_SENSORS_MAX31760=y
CONFIG_SENSORS_MAX6620=y
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_MLXREG_FAN=y
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MENF21BMC_HWMON=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775_CORE=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT6775_I2C=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_NSA320=y
CONFIG_SENSORS_NZXT_KRAKEN2=y
CONFIG_SENSORS_NZXT_SMART2=y
CONFIG_SENSORS_OCC_P8_I2C=y
CONFIG_SENSORS_OCC_P9_SBE=y
CONFIG_SENSORS_OCC=y
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_PECI_CPUTEMP=y
CONFIG_SENSORS_PECI_DIMMTEMP=y
CONFIG_SENSORS_PECI=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1266=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_BPA_RS600=y
CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
CONFIG_SENSORS_FSP_3Y=y
CONFIG_SENSORS_IBM_CFFPS=y
CONFIG_SENSORS_DPS920AB=y
CONFIG_SENSORS_INSPUR_IPSPS=y
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR36021=y
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IR38064_REGULATOR=y
CONFIG_SENSORS_IRPS5401=y
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LM25066_REGULATOR=y
CONFIG_SENSORS_LT7182S=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX15301=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX16601=y
CONFIG_SENSORS_MAX20730=y
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX31785=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_MP2888=y
CONFIG_SENSORS_MP2975=y
CONFIG_SENSORS_MP5023=y
CONFIG_SENSORS_PIM4328=y
CONFIG_SENSORS_PLI1209BC=y
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
CONFIG_SENSORS_PM6764TR=y
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_Q54SJ108A2=y
CONFIG_SENSORS_STPDDC60=y
CONFIG_SENSORS_TPS40422=y
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_TPS546D24=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE152=y
CONFIG_SENSORS_XDPE122=y
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_RASPBERRYPI_HWMON=y
CONFIG_SENSORS_SL28CPLD=y
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHT4x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC2305=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP464=y
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
CONFIG_SENSORS_XGENE=y
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=y
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_FREQ_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_IMX_SC_THERMAL=y
CONFIG_IMX8MM_THERMAL=y
CONFIG_K3_THERMAL=y
CONFIG_MAX77620_THERMAL=y
CONFIG_QORIQ_THERMAL=y
CONFIG_SPEAR_THERMAL=y
CONFIG_SUN8I_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_RCAR_GEN3_THERMAL=y
CONFIG_RZG2L_THERMAL=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DA9062_THERMAL=y
CONFIG_MTK_THERMAL=y
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_MENLOW=y
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=y
CONFIG_BCM2835_THERMAL=y
CONFIG_BRCMSTB_THERMAL=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BCM_SR_THERMAL=y
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=y
CONFIG_TI_THERMAL=y
CONFIG_OMAP3_THERMAL=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=y
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=y
CONFIG_TEGRA_BPMP_THERMAL=y
CONFIG_TEGRA30_TSENSOR=y
# end of NVIDIA Tegra thermal drivers
CONFIG_GENERIC_ADC_THERMAL=y
#
# Qualcomm thermal drivers
#
CONFIG_QCOM_TSENS=y
CONFIG_QCOM_SPMI_ADC_TM5=y
CONFIG_QCOM_SPMI_TEMP_ALARM=y
# end of Qualcomm thermal drivers
CONFIG_UNIPHIER_THERMAL=y
CONFIG_SPRD_THERMAL=y
CONFIG_KHADAS_MCU_FAN_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_BD957XMUF_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_MENF21BMC_WATCHDOG=y
CONFIG_MENZ069_WATCHDOG=y
CONFIG_WDAT_WDT=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_RAVE_SP_WATCHDOG=y
CONFIG_MLX_WDT=y
CONFIG_SL28CPLD_WATCHDOG=y
CONFIG_ARMADA_37XX_WATCHDOG=y
CONFIG_ASM9260_WATCHDOG=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SAMA5D4_WATCHDOG=y
CONFIG_CADENCE_WATCHDOG=y
CONFIG_FTWDT010_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_EP93XX_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_PNX4008_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=y
CONFIG_K3_RTI_WATCHDOG=y
CONFIG_RN5T618_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_NPCM7XX_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_STMP3XXX_RTC_WATCHDOG=y
CONFIG_TS4800_WATCHDOG=y
CONFIG_TS72XX_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_IMX7ULP_WDT=y
CONFIG_RETU_WATCHDOG=y
CONFIG_MOXART_WDT=y
CONFIG_ST_LPC_WATCHDOG=y
CONFIG_TEGRA_WATCHDOG=y
CONFIG_QCOM_WDT=y
CONFIG_MESON_GXBB_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
CONFIG_MEDIATEK_WATCHDOG=y
CONFIG_DIGICOLOR_WATCHDOG=y
CONFIG_LPC18XX_WATCHDOG=y
CONFIG_RENESAS_WDT=y
CONFIG_RENESAS_RZAWDT=y
CONFIG_RENESAS_RZN1WDT=y
CONFIG_RENESAS_RZG2LWDT=y
CONFIG_ASPEED_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=y
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_RTD119X_WATCHDOG=y
CONFIG_REALTEK_OTTO_WDT=y
CONFIG_SPRD_WATCHDOG=y
CONFIG_PM8916_WATCHDOG=y
CONFIG_VISCONTI_WATCHDOG=y
CONFIG_MSC313E_WATCHDOG=y
CONFIG_APPLE_WATCHDOG=y
CONFIG_SUNPLUS_WATCHDOG=y
CONFIG_ALIM7101_WDT=y
CONFIG_SC520_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_KEMPLD_WDT=y
CONFIG_RDC321X_WDT=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCM2835_WDT=y
CONFIG_BCM_KONA_WDT=y
CONFIG_BCM_KONA_WDT_DEBUG=y
CONFIG_BCM7038_WDT=y
CONFIG_IMGPDC_WDT=y
CONFIG_MPC5200_WDT=y
CONFIG_MEN_A21_WDT=y
CONFIG_UML_WATCHDOG=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_HOST_SOC=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_PFLASH=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_AT91_USART=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_MADERA_SPI=y
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
CONFIG_MFD_ASIC3=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_ENE_KB3930=y
CONFIG_MFD_EXYNOS_LPASS=y
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
CONFIG_MFD_MXS_LRADC=y
CONFIG_MFD_MX25_TSADC=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI6421_SPMI=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_INTEL_SOC_PMIC_CHTWC=y
CONFIG_MFD_IQS62X=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77714=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6370=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_OCELOT=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SY7636A=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RT5120=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SL28CPLD=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SC27XX_PMIC=y
CONFIG_ABX500_CORE=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# end of STMicroelectronics STMPE Interface Drivers
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
CONFIG_MFD_VX855=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_MFD_STW481X=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STM32_LPTIMER=y
CONFIG_MFD_STM32_TIMERS=y
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_KHADAS_MCU=y
CONFIG_MFD_ACER_A500_EC=y
CONFIG_MFD_QCOM_PM8008=y
CONFIG_RAVE_SP_CORE=y
CONFIG_MFD_INTEL_M10_BMC=y
CONFIG_MFD_RSMU_I2C=y
CONFIG_MFD_RSMU_SPI=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
CONFIG_REGULATOR_ARIZONA_MICSUPP=y
CONFIG_REGULATOR_ARM_SCMI=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD71815=y
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_BD9571MWV=y
CONFIG_REGULATOR_BD957XMUF=y
CONFIG_REGULATOR_CPCAP=y
CONFIG_REGULATOR_CROS_EC=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_HI6421V600=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LOCHNAGAR=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX77650=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6315=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6331=y
CONFIG_REGULATOR_MT6332=y
CONFIG_REGULATOR_MT6358=y
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6370=y
CONFIG_REGULATOR_MT6380=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5120=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SC2731=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_STM32_BOOSTER=y
CONFIG_REGULATOR_STM32_VREFBUF=y
CONFIG_REGULATOR_STM32_PWR=y
CONFIG_REGULATOR_STPMIC1=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_STW481X_VMMC=y
CONFIG_REGULATOR_SY7636A=y
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS68470=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_UNIPHIER=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=y
CONFIG_IR_FINTEK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_GPIO_TX=y
CONFIG_IR_HIX5HD2=y
CONFIG_IR_IGORPLUGUSB=y
CONFIG_IR_IGUANA=y
CONFIG_IR_IMON=y
CONFIG_IR_IMON_RAW=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_MESON=y
CONFIG_IR_MESON_TX=y
CONFIG_IR_MTK=y
CONFIG_IR_NUVOTON=y
CONFIG_IR_PWM_TX=y
CONFIG_IR_REDRAT3=y
CONFIG_IR_RX51=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SPI=y
CONFIG_IR_STREAMZAP=y
CONFIG_IR_SUNXI=y
CONFIG_IR_TOY=y
CONFIG_IR_TTUSBIR=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_RC_ATI_REMOTE=y
CONFIG_RC_LOOPBACK=y
CONFIG_RC_ST=y
CONFIG_RC_XBOX_DVD=y
CONFIG_IR_IMG=y
CONFIG_IR_IMG_RAW=y
CONFIG_IR_IMG_HW=y
CONFIG_IR_IMG_NEC=y
CONFIG_IR_IMG_JVC=y
CONFIG_IR_IMG_SONY=y
CONFIG_IR_IMG_SHARP=y
CONFIG_IR_IMG_SANYO=y
CONFIG_IR_IMG_RC5=y
CONFIG_IR_IMG_RC6=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y
#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_CEC_CROS_EC=y
CONFIG_CEC_MESON_AO=y
CONFIG_CEC_MESON_G12A_AO=y
CONFIG_CEC_GPIO=y
CONFIG_CEC_SAMSUNG_S5P=y
CONFIG_CEC_STI=y
CONFIG_CEC_STM32=y
CONFIG_CEC_TEGRA=y
CONFIG_CEC_SECO=y
CONFIG_CEC_SECO_RC=y
CONFIG_USB_PULSE8_CEC=y
CONFIG_USB_RAINSHADOW_CEC=y
# end of CEC support
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_JPEG_HELPER=y
CONFIG_V4L2_H264=y
CONFIG_V4L2_VP9=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options
#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers'
#
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_GSPCA=y
CONFIG_USB_GSPCA_BENQ=y
CONFIG_USB_GSPCA_CONEX=y
CONFIG_USB_GSPCA_CPIA1=y
CONFIG_USB_GSPCA_DTCS033=y
CONFIG_USB_GSPCA_ETOMS=y
CONFIG_USB_GSPCA_FINEPIX=y
CONFIG_USB_GSPCA_JEILINJ=y
CONFIG_USB_GSPCA_JL2005BCD=y
CONFIG_USB_GSPCA_KINECT=y
CONFIG_USB_GSPCA_KONICA=y
CONFIG_USB_GSPCA_MARS=y
CONFIG_USB_GSPCA_MR97310A=y
CONFIG_USB_GSPCA_NW80X=y
CONFIG_USB_GSPCA_OV519=y
CONFIG_USB_GSPCA_OV534=y
CONFIG_USB_GSPCA_OV534_9=y
CONFIG_USB_GSPCA_PAC207=y
CONFIG_USB_GSPCA_PAC7302=y
CONFIG_USB_GSPCA_PAC7311=y
CONFIG_USB_GSPCA_SE401=y
CONFIG_USB_GSPCA_SN9C2028=y
CONFIG_USB_GSPCA_SN9C20X=y
CONFIG_USB_GSPCA_SONIXB=y
CONFIG_USB_GSPCA_SONIXJ=y
CONFIG_USB_GSPCA_SPCA1528=y
CONFIG_USB_GSPCA_SPCA500=y
CONFIG_USB_GSPCA_SPCA501=y
CONFIG_USB_GSPCA_SPCA505=y
CONFIG_USB_GSPCA_SPCA506=y
CONFIG_USB_GSPCA_SPCA508=y
CONFIG_USB_GSPCA_SPCA561=y
CONFIG_USB_GSPCA_SQ905=y
CONFIG_USB_GSPCA_SQ905C=y
CONFIG_USB_GSPCA_SQ930X=y
CONFIG_USB_GSPCA_STK014=y
CONFIG_USB_GSPCA_STK1135=y
CONFIG_USB_GSPCA_STV0680=y
CONFIG_USB_GSPCA_SUNPLUS=y
CONFIG_USB_GSPCA_T613=y
CONFIG_USB_GSPCA_TOPRO=y
CONFIG_USB_GSPCA_TOUPTEK=y
CONFIG_USB_GSPCA_TV8532=y
CONFIG_USB_GSPCA_VC032X=y
CONFIG_USB_GSPCA_VICAM=y
CONFIG_USB_GSPCA_XIRLINK_CIT=y
CONFIG_USB_GSPCA_ZC3XX=y
CONFIG_USB_GL860=y
CONFIG_USB_M5602=y
CONFIG_USB_STV06XX=y
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=y
CONFIG_VIDEO_USBTV=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=y
CONFIG_VIDEO_GO7007_USB=y
CONFIG_VIDEO_GO7007_LOADER=y
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=y
CONFIG_VIDEO_HDPVR=y
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_STK1160_COMMON=y
CONFIG_VIDEO_STK1160=y
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=y
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=y
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=y
CONFIG_VIDEO_CX231XX_DVB=y
#
# Digital TV USB devices
#
CONFIG_DVB_AS102=y
CONFIG_DVB_B2C2_FLEXCOP_USB=y
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
CONFIG_DVB_USB_V2=y
CONFIG_DVB_USB_AF9015=y
CONFIG_DVB_USB_AF9035=y
CONFIG_DVB_USB_ANYSEE=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_AZ6007=y
CONFIG_DVB_USB_CE6230=y
CONFIG_DVB_USB_DVBSKY=y
CONFIG_DVB_USB_EC168=y
CONFIG_DVB_USB_GL861=y
CONFIG_DVB_USB_LME2510=y
CONFIG_DVB_USB_MXL111SF=y
CONFIG_DVB_USB_RTL28XXU=y
CONFIG_DVB_USB_ZD1301=y
CONFIG_DVB_USB=y
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=y
CONFIG_DVB_USB_AF9005=y
CONFIG_DVB_USB_AF9005_REMOTE=y
CONFIG_DVB_USB_AZ6027=y
CONFIG_DVB_USB_CINERGY_T2=y
CONFIG_DVB_USB_CXUSB=y
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_DIB0700=y
CONFIG_DVB_USB_DIB3000MC=y
CONFIG_DVB_USB_DIBUSB_MB=y
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=y
CONFIG_DVB_USB_DIGITV=y
CONFIG_DVB_USB_DTT200U=y
CONFIG_DVB_USB_DTV5100=y
CONFIG_DVB_USB_DW2102=y
CONFIG_DVB_USB_GP8PSK=y
CONFIG_DVB_USB_M920X=y
CONFIG_DVB_USB_NOVA_T_USB2=y
CONFIG_DVB_USB_OPERA1=y
CONFIG_DVB_USB_PCTV452E=y
CONFIG_DVB_USB_TECHNISAT_USB2=y
CONFIG_DVB_USB_TTUSB2=y
CONFIG_DVB_USB_UMT_010=y
CONFIG_DVB_USB_VP702X=y
CONFIG_DVB_USB_VP7045=y
CONFIG_SMS_USB_DRV=y
CONFIG_DVB_TTUSB_BUDGET=y
CONFIG_DVB_TTUSB_DEC=y
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_V4L2=y
CONFIG_VIDEO_EM28XX_ALSA=y
CONFIG_VIDEO_EM28XX_DVB=y
CONFIG_VIDEO_EM28XX_RC=y
#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=y
CONFIG_USB_HACKRF=y
CONFIG_USB_MSI2500=y
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=y
CONFIG_STA2X11_VIP=y
CONFIG_VIDEO_TW5864=y
CONFIG_VIDEO_TW68=y
CONFIG_VIDEO_TW686X=y
CONFIG_VIDEO_ZORAN=y
CONFIG_VIDEO_ZORAN_DC30=y
CONFIG_VIDEO_ZORAN_ZR36060=y
CONFIG_VIDEO_ZORAN_BUZ=y
CONFIG_VIDEO_ZORAN_DC10=y
CONFIG_VIDEO_ZORAN_LML33=y
CONFIG_VIDEO_ZORAN_LML33R10=y
CONFIG_VIDEO_ZORAN_AVS6EYES=y
#
# Media capture/analog TV support
#
CONFIG_VIDEO_DT3155=y
CONFIG_VIDEO_IVTV=y
CONFIG_VIDEO_IVTV_ALSA=y
CONFIG_VIDEO_FB_IVTV=y
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=y
CONFIG_DVB_BT8XX=y
CONFIG_VIDEO_COBALT=y
CONFIG_VIDEO_CX18=y
CONFIG_VIDEO_CX18_ALSA=y
CONFIG_VIDEO_CX23885=y
CONFIG_MEDIA_ALTERA_CI=y
CONFIG_VIDEO_CX25821=y
CONFIG_VIDEO_CX25821_ALSA=y
CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_ALSA=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_DVB=y
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=y
CONFIG_VIDEO_CX88_MPEG=y
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_ALSA=y
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=y
CONFIG_VIDEO_SAA7134_GO7007=y
CONFIG_VIDEO_SAA7164=y
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
CONFIG_DVB_DDBRIDGE=y
CONFIG_DVB_DDBRIDGE_MSIENABLE=y
CONFIG_DVB_DM1105=y
CONFIG_MANTIS_CORE=y
CONFIG_DVB_MANTIS=y
CONFIG_DVB_HOPPER=y
CONFIG_DVB_NETUP_UNIDVB=y
CONFIG_DVB_NGENE=y
CONFIG_DVB_PLUTO2=y
CONFIG_DVB_PT1=y
CONFIG_DVB_PT3=y
CONFIG_DVB_SMIPCIE=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_SHARK=y
CONFIG_RADIO_SHARK2=y
CONFIG_RADIO_SI4713=y
CONFIG_RADIO_SI476X=y
CONFIG_RADIO_TEA575X=y
CONFIG_RADIO_TEA5764=y
CONFIG_RADIO_TEA5764_XTAL=y
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_TIMBERDALE=y
CONFIG_RADIO_WL1273=y
CONFIG_USB_DSBR=y
CONFIG_USB_KEENE=y
CONFIG_USB_MA901=y
CONFIG_USB_MR800=y
CONFIG_USB_RAREMONO=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
CONFIG_I2C_SI470X=y
CONFIG_USB_SI4713=y
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
CONFIG_RADIO_WL128X=y
CONFIG_V4L_RADIO_ISA_DRIVERS=y
CONFIG_RADIO_AZTECH=y
CONFIG_RADIO_AZTECH_PORT=350
CONFIG_RADIO_CADET=y
CONFIG_RADIO_GEMTEK=y
CONFIG_RADIO_GEMTEK_PORT=34c
CONFIG_RADIO_GEMTEK_PROBE=y
CONFIG_RADIO_ISA=y
CONFIG_RADIO_RTRACK=y
CONFIG_RADIO_RTRACK2=y
CONFIG_RADIO_RTRACK2_PORT=30c
CONFIG_RADIO_RTRACK_PORT=30f
CONFIG_RADIO_SF16FMI=y
CONFIG_RADIO_SF16FMR2=y
CONFIG_RADIO_TERRATEC=y
CONFIG_RADIO_TRUST=y
CONFIG_RADIO_TRUST_PORT=350
CONFIG_RADIO_TYPHOON=y
CONFIG_RADIO_TYPHOON_MUTEFREQ=87500
CONFIG_RADIO_TYPHOON_PORT=316
CONFIG_RADIO_ZOLTRIX=y
CONFIG_RADIO_ZOLTRIX_PORT=20c
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
CONFIG_VIDEO_MUX=y
#
# Allegro DVT media platform drivers
#
CONFIG_VIDEO_ALLEGRO_DVT=y
#
# Amlogic media platform drivers
#
CONFIG_VIDEO_MESON_GE2D=y
#
# Amphion drivers
#
CONFIG_VIDEO_AMPHION_VPU=y
#
# Aspeed media platform drivers
#
CONFIG_VIDEO_ASPEED=y
#
# Atmel media platform drivers
#
CONFIG_VIDEO_ATMEL_ISC=y
CONFIG_VIDEO_ATMEL_XISC=y
CONFIG_VIDEO_ATMEL_ISC_BASE=y
CONFIG_VIDEO_ATMEL_ISI=y
CONFIG_VIDEO_MICROCHIP_CSI2DC=y
#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=y
CONFIG_VIDEO_CADENCE_CSI2TX=y
#
# Chips&Media media platform drivers
#
CONFIG_VIDEO_CODA=y
CONFIG_VIDEO_IMX_VDOA=y
#
# Intel media platform drivers
#
CONFIG_VIDEO_PXA27x=y
#
# Marvell media platform drivers
#
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_VIDEO_MMP_CAMERA=y
#
# Mediatek media platform drivers
#
CONFIG_VIDEO_MEDIATEK_JPEG=y
CONFIG_VIDEO_MEDIATEK_MDP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_SCP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_VPU=y
CONFIG_VIDEO_MEDIATEK_VCODEC=y
CONFIG_VIDEO_MEDIATEK_VPU=y
CONFIG_VIDEO_MEDIATEK_MDP3=y
#
# NVidia media platform drivers
#
CONFIG_VIDEO_TEGRA_VDE=y
#
# NXP media platform drivers
#
CONFIG_VIDEO_IMX_MIPI_CSIS=y
CONFIG_VIDEO_IMX_PXP=y
CONFIG_VIDEO_MX2_EMMAPRP=y
CONFIG_VIDEO_DW100=y
CONFIG_VIDEO_IMX8_JPEG=y
#
# Qualcomm media platform drivers
#
CONFIG_VIDEO_QCOM_CAMSS=y
CONFIG_VIDEO_QCOM_VENUS=y
#
# Renesas media platform drivers
#
CONFIG_VIDEO_RENESAS_CEU=y
CONFIG_VIDEO_RCAR_ISP=y
CONFIG_VIDEO_SH_VOU=y
CONFIG_VIDEO_RCAR_CSI2=y
CONFIG_VIDEO_RCAR_VIN=y
CONFIG_VIDEO_RENESAS_FCP=y
CONFIG_VIDEO_RENESAS_FDP1=y
CONFIG_VIDEO_RENESAS_JPU=y
CONFIG_VIDEO_RENESAS_VSP1=y
CONFIG_VIDEO_RCAR_DRIF=y
#
# Rockchip media platform drivers
#
CONFIG_VIDEO_ROCKCHIP_RGA=y
CONFIG_VIDEO_ROCKCHIP_ISP1=y
#
# Samsung media platform drivers
#
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=y
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=y
CONFIG_VIDEO_EXYNOS4_IS_COMMON=y
CONFIG_VIDEO_S5P_FIMC=y
CONFIG_VIDEO_S5P_MIPI_CSIS=y
CONFIG_VIDEO_EXYNOS_FIMC_LITE=y
CONFIG_VIDEO_EXYNOS4_FIMC_IS=y
CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
CONFIG_VIDEO_S3C_CAMIF=y
CONFIG_VIDEO_SAMSUNG_S5P_G2D=y
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=y
CONFIG_VIDEO_SAMSUNG_S5P_MFC=y
#
# STMicroelectronics media platform drivers
#
CONFIG_VIDEO_STI_BDISP=y
CONFIG_DVB_C8SECTPFE=y
CONFIG_VIDEO_STI_DELTA=y
CONFIG_VIDEO_STI_DELTA_MJPEG=y
CONFIG_VIDEO_STI_DELTA_DRIVER=y
CONFIG_VIDEO_STI_HVA=y
CONFIG_VIDEO_STI_HVA_DEBUGFS=y
CONFIG_VIDEO_STM32_DCMI=y
CONFIG_VIDEO_STM32_DMA2D=y
#
# Sunxi media platform drivers
#
CONFIG_VIDEO_SUN4I_CSI=y
CONFIG_VIDEO_SUN6I_CSI=y
CONFIG_VIDEO_SUN6I_MIPI_CSI2=y
CONFIG_VIDEO_SUN8I_A83T_MIPI_CSI2=y
CONFIG_VIDEO_SUN8I_DEINTERLACE=y
CONFIG_VIDEO_SUN8I_ROTATE=y
#
# Texas Instruments drivers
#
CONFIG_VIDEO_TI_VPDMA=y
CONFIG_VIDEO_TI_SC=y
CONFIG_VIDEO_TI_CSC=y
CONFIG_VIDEO_TI_CAL=y
CONFIG_VIDEO_TI_CAL_MC=y
CONFIG_VIDEO_TI_VPE=y
CONFIG_VIDEO_TI_VPE_DEBUG=y
CONFIG_VIDEO_AM437X_VPFE=y
CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=y
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=y
CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY=y
CONFIG_VIDEO_OMAP2_VOUT_VRFB=y
CONFIG_VIDEO_OMAP2_VOUT=y
CONFIG_VIDEO_OMAP3=y
CONFIG_VIDEO_OMAP3_DEBUG=y
#
# Verisilicon media platform drivers
#
CONFIG_VIDEO_HANTRO=y
CONFIG_VIDEO_HANTRO_IMX8M=y
CONFIG_VIDEO_HANTRO_SAMA5D4=y
CONFIG_VIDEO_HANTRO_ROCKCHIP=y
CONFIG_VIDEO_HANTRO_SUNXI=y
#
# VIA media platform drivers
#
CONFIG_VIDEO_VIA_CAMERA=y
#
# Xilinx media platform drivers
#
CONFIG_VIDEO_XILINX=y
CONFIG_VIDEO_XILINX_CSI2RXSS=y
CONFIG_VIDEO_XILINX_TPG=y
CONFIG_VIDEO_XILINX_VTC=y
#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=y
CONFIG_VIDEO_VICODEC=y
CONFIG_VIDEO_VIMC=y
CONFIG_VIDEO_VIVID=y
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=y
#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_TTPCI_EEPROM=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_SMS_SIANO_MDTV=y
CONFIG_SMS_SIANO_RC=y
CONFIG_SMS_SIANO_DEBUGFS=y
CONFIG_VIDEO_V4L2_TPG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_DVB=y
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=y
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=y
CONFIG_VIDEO_CCS_PLL=y
CONFIG_VIDEO_AR0521=y
CONFIG_VIDEO_HI556=y
CONFIG_VIDEO_HI846=y
CONFIG_VIDEO_HI847=y
CONFIG_VIDEO_IMX208=y
CONFIG_VIDEO_IMX214=y
CONFIG_VIDEO_IMX219=y
CONFIG_VIDEO_IMX258=y
CONFIG_VIDEO_IMX274=y
CONFIG_VIDEO_IMX290=y
CONFIG_VIDEO_IMX319=y
CONFIG_VIDEO_IMX334=y
CONFIG_VIDEO_IMX335=y
CONFIG_VIDEO_IMX355=y
CONFIG_VIDEO_IMX412=y
CONFIG_VIDEO_MAX9271_LIB=y
CONFIG_VIDEO_MT9M001=y
CONFIG_VIDEO_MT9M032=y
CONFIG_VIDEO_MT9M111=y
CONFIG_VIDEO_MT9P031=y
CONFIG_VIDEO_MT9T001=y
CONFIG_VIDEO_MT9T112=y
CONFIG_VIDEO_MT9V011=y
CONFIG_VIDEO_MT9V032=y
CONFIG_VIDEO_MT9V111=y
CONFIG_VIDEO_NOON010PC30=y
CONFIG_VIDEO_OG01A1B=y
CONFIG_VIDEO_OV02A10=y
CONFIG_VIDEO_OV08D10=y
CONFIG_VIDEO_OV13858=y
CONFIG_VIDEO_OV13B10=y
CONFIG_VIDEO_OV2640=y
CONFIG_VIDEO_OV2659=y
CONFIG_VIDEO_OV2680=y
CONFIG_VIDEO_OV2685=y
CONFIG_VIDEO_OV2740=y
CONFIG_VIDEO_OV5640=y
CONFIG_VIDEO_OV5645=y
CONFIG_VIDEO_OV5647=y
CONFIG_VIDEO_OV5648=y
CONFIG_VIDEO_OV5670=y
CONFIG_VIDEO_OV5675=y
CONFIG_VIDEO_OV5693=y
CONFIG_VIDEO_OV5695=y
CONFIG_VIDEO_OV6650=y
CONFIG_VIDEO_OV7251=y
CONFIG_VIDEO_OV7640=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV772X=y
CONFIG_VIDEO_OV7740=y
CONFIG_VIDEO_OV8856=y
CONFIG_VIDEO_OV8865=y
CONFIG_VIDEO_OV9282=y
CONFIG_VIDEO_OV9640=y
CONFIG_VIDEO_OV9650=y
CONFIG_VIDEO_OV9734=y
CONFIG_VIDEO_RDACM20=y
CONFIG_VIDEO_RDACM21=y
CONFIG_VIDEO_RJ54N1=y
CONFIG_VIDEO_S5C73M3=y
CONFIG_VIDEO_S5K4ECGX=y
CONFIG_VIDEO_S5K5BAF=y
CONFIG_VIDEO_S5K6A3=y
CONFIG_VIDEO_S5K6AA=y
CONFIG_VIDEO_SR030PC30=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_CCS=y
CONFIG_VIDEO_ET8EK8=y
CONFIG_VIDEO_M5MOLS=y
# end of Camera sensor devices
#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
CONFIG_VIDEO_AK7375=y
CONFIG_VIDEO_DW9714=y
CONFIG_VIDEO_DW9768=y
CONFIG_VIDEO_DW9807_VCM=y
# end of Lens drivers
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=y
CONFIG_VIDEO_LM3560=y
CONFIG_VIDEO_LM3646=y
# end of Flash devices
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_SONY_BTF_MPX=y
CONFIG_VIDEO_TDA1997X=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_WM8775=y
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
# end of RDS decoders
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_ADV748X=y
CONFIG_VIDEO_ADV7604=y
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=y
CONFIG_VIDEO_ADV7842_CEC=y
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
CONFIG_VIDEO_ISL7998X=y
CONFIG_VIDEO_KS0127=y
CONFIG_VIDEO_MAX9286=y
CONFIG_VIDEO_ML86V7667=y
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TC358743=y
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
CONFIG_VIDEO_TW2804=y
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=y
CONFIG_VIDEO_TW9910=y
CONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
# end of Video decoders
#
# Video encoders
#
CONFIG_VIDEO_AD9389B=y
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=y
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_ADV7511=y
CONFIG_VIDEO_ADV7511_CEC=y
CONFIG_VIDEO_AK881X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_THS8200=y
# end of Video encoders
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
# end of Video improvement chips
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
# end of Audio/Video compression chips
#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_ST_MIPID02=y
CONFIG_VIDEO_THS7303=y
# end of Miscellaneous helper chips
#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=y
CONFIG_VIDEO_GS1662=y
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_FC2580=y
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_M88RS6000T=y
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MSI001=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MXL301RF=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18250=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=y
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV0910=y
CONFIG_DVB_STV6110x=y
CONFIG_DVB_STV6111=y
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_MN88472=y
CONFIG_DVB_MN88473=y
CONFIG_DVB_SI2165=y
CONFIG_DVB_TDA18271C2DD=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_STV6110=y
CONFIG_DVB_TDA10071=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA8261=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_TUA6100=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_ZL10036=y
CONFIG_DVB_ZL10039=y
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=y
CONFIG_DVB_AS102_FE=y
CONFIG_DVB_CX22700=y
CONFIG_DVB_CX22702=y
CONFIG_DVB_CXD2820R=y
CONFIG_DVB_CXD2841ER=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_DIB9000=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_EC100=y
CONFIG_DVB_GP8PSK_FE=y
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_RTL2832_SDR=y
CONFIG_DVB_S5H1432=y
CONFIG_DVB_SI2168=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_STV0367=y
CONFIG_DVB_TDA10048=y
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_ZD1301_DEMOD=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_CXD2880=y
#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
CONFIG_DVB_VES1820=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LGDT3306A=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_MXL692=y
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_OR51211=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y
CONFIG_DVB_S921=y
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=y
CONFIG_DVB_TC90522=y
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
CONFIG_DVB_TUNER_DIB0090=y
#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=y
CONFIG_DVB_AF9033=y
CONFIG_DVB_ASCOT2E=y
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_HELENE=y
CONFIG_DVB_HORUS3A=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_LNBH25=y
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=y
CONFIG_DVB_LNBP22=y
CONFIG_DVB_M88RS2000=y
CONFIG_DVB_TDA665x=y
CONFIG_DVB_DRX39XYJ=y
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=y
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_AGP=y
CONFIG_AGP_I460=y
CONFIG_AGP_HP_ZX1=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DBI=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DEBUG_MM=y
CONFIG_DRM_KUNIT_TEST=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_BUDDY=y
CONFIG_DRM_VRAM_HELPER=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_DMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips
#
# ARM devices
#
CONFIG_DRM_HDLCD=y
CONFIG_DRM_HDLCD_SHOW_UNDERRUN=y
CONFIG_DRM_MALI_DISPLAY=y
CONFIG_DRM_KOMEDA=y
# end of ARM devices
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=y
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_HDCP=y
CONFIG_DRM_AMD_DC_SI=y
# end of Display Engine Configuration
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_NOUVEAU_DEBUG_MMU=y
CONFIG_NOUVEAU_DEBUG_PUSH=y
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_KMB_DISPLAY=y
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
CONFIG_DRM_EXYNOS=y
#
# CRTCs
#
CONFIG_DRM_EXYNOS5433_DECON=y
CONFIG_DRM_EXYNOS_MIXER=y
CONFIG_DRM_EXYNOS_VIDI=y
#
# Encoders and Bridges
#
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_MIC=y
#
# Sub-drivers
#
CONFIG_DRM_EXYNOS_G2D=y
CONFIG_DRM_EXYNOS_IPP=y
CONFIG_DRM_EXYNOS_FIMC=y
CONFIG_DRM_EXYNOS_ROTATOR=y
CONFIG_DRM_EXYNOS_SCALER=y
CONFIG_DRM_EXYNOS_GSC=y
CONFIG_DRM_ROCKCHIP=y
CONFIG_ROCKCHIP_VOP=y
CONFIG_ROCKCHIP_VOP2=y
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_CDN_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
CONFIG_ROCKCHIP_LVDS=y
CONFIG_ROCKCHIP_RGB=y
CONFIG_ROCKCHIP_RK3066_HDMI=y
CONFIG_DRM_UDL=y
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_RCAR_DW_HDMI=y
CONFIG_DRM_RCAR_USE_LVDS=y
CONFIG_DRM_RCAR_MIPI_DSI=y
CONFIG_DRM_SUN4I=y
CONFIG_DRM_SUN4I_HDMI=y
CONFIG_DRM_SUN4I_HDMI_CEC=y
CONFIG_DRM_SUN4I_BACKEND=y
CONFIG_DRM_SUN6I_DSI=y
CONFIG_DRM_SUN8I_DW_HDMI=y
CONFIG_DRM_SUN8I_MIXER=y
CONFIG_DRM_SUN8I_TCON_TOP=y
CONFIG_DRM_QXL=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_MSM=y
CONFIG_DRM_MSM_GPU_STATE=y
CONFIG_DRM_MSM_GPU_SUDO=y
CONFIG_DRM_MSM_MDSS=y
CONFIG_DRM_MSM_MDP4=y
CONFIG_DRM_MSM_MDP5=y
CONFIG_DRM_MSM_DPU=y
CONFIG_DRM_MSM_DP=y
CONFIG_DRM_MSM_DSI=y
CONFIG_DRM_MSM_DSI_28NM_PHY=y
CONFIG_DRM_MSM_DSI_20NM_PHY=y
CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
CONFIG_DRM_MSM_DSI_14NM_PHY=y
CONFIG_DRM_MSM_DSI_10NM_PHY=y
CONFIG_DRM_MSM_DSI_7NM_PHY=y
CONFIG_DRM_MSM_HDMI=y
CONFIG_DRM_MSM_HDMI_HDCP=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_PANEL_ABT_Y030XX067A=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=y
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_EDP=y
CONFIG_DRM_PANEL_EBBG_FT8719=y
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
CONFIG_DRM_PANEL_ILITEK_IL9322=y
CONFIG_DRM_PANEL_ILITEK_ILI9341=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_EJ030NA=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=y
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
CONFIG_DRM_PANEL_LG_LB035Q02=y
CONFIG_DRM_PANEL_LG_LG4573=y
CONFIG_DRM_PANEL_NEC_NL8048HL11=y
CONFIG_DRM_PANEL_NEWVISION_NV3052C=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
CONFIG_DRM_PANEL_NOVATEK_NT39016=y
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y
CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
CONFIG_DRM_PANEL_RONBO_RB070D30=y
CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y
CONFIG_DRM_PANEL_SAMSUNG_DB7430=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=y
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=y
CONFIG_DRM_PANEL_SITRONIX_ST7701=y
CONFIG_DRM_PANEL_SITRONIX_ST7703=y
CONFIG_DRM_PANEL_SITRONIX_ST7789V=y
CONFIG_DRM_PANEL_SONY_ACX565AKM=y
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=y
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
CONFIG_DRM_PANEL_TPO_TD028TTEC1=y
CONFIG_DRM_PANEL_TPO_TD043MTEA1=y
CONFIG_DRM_PANEL_TPO_TPG110=y
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=y
CONFIG_DRM_CROS_EC_ANX7688=y
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_FSL_LDB=y
CONFIG_DRM_ITE_IT6505=y
CONFIG_DRM_LONTIUM_LT8912B=y
CONFIG_DRM_LONTIUM_LT9211=y
CONFIG_DRM_LONTIUM_LT9611=y
CONFIG_DRM_LONTIUM_LT9611UXC=y
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
CONFIG_DRM_NWL_MIPI_DSI=y
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_PARADE_PS8640=y
CONFIG_DRM_SIL_SII8620=y
CONFIG_DRM_SII902X=y
CONFIG_DRM_SII9234=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=y
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=y
CONFIG_DRM_TOSHIBA_TC358768=y
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_DLPC3433=y
CONFIG_DRM_TI_TFP410=y
CONFIG_DRM_TI_SN65DSI83=y
CONFIG_DRM_TI_SN65DSI86=y
CONFIG_DRM_TI_TPD12S015=y
CONFIG_DRM_ANALOGIX_ANX6345=y
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7511_CEC=y
CONFIG_DRM_CDNS_MHDP8546=y
CONFIG_DRM_CDNS_MHDP8546_J721E=y
CONFIG_DRM_IMX8QM_LDB=y
CONFIG_DRM_IMX8QXP_LDB=y
CONFIG_DRM_IMX8QXP_PIXEL_COMBINER=y
CONFIG_DRM_IMX8QXP_PIXEL_LINK=y
CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI=y
CONFIG_DRM_DW_HDMI=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=y
CONFIG_DRM_DW_HDMI_I2S_AUDIO=y
CONFIG_DRM_DW_HDMI_GP_AUDIO=y
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_DW_MIPI_DSI=y
# end of Display Interface Bridges
CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_HDMI=y
CONFIG_DRM_INGENIC=y
CONFIG_DRM_INGENIC_IPU=y
CONFIG_DRM_V3D=y
CONFIG_DRM_VC4=y
CONFIG_DRM_VC4_HDMI_CEC=y
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_HISI_HIBMC=y
CONFIG_DRM_LOGICVC=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
CONFIG_DRM_IMX_LCDIF=y
CONFIG_DRM_ARCPGU=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_GM12U320=y
CONFIG_DRM_PANEL_MIPI_DBI=y
CONFIG_DRM_SIMPLEDRM=y
CONFIG_TINYDRM_HX8357D=y
CONFIG_TINYDRM_ILI9163=y
CONFIG_TINYDRM_ILI9225=y
CONFIG_TINYDRM_ILI9341=y
CONFIG_TINYDRM_ILI9486=y
CONFIG_TINYDRM_MI0283QT=y
CONFIG_TINYDRM_REPAPER=y
CONFIG_TINYDRM_ST7586=y
CONFIG_TINYDRM_ST7735R=y
CONFIG_DRM_PL111=y
CONFIG_DRM_TVE200=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_PANFROST=y
CONFIG_DRM_ASPEED_GFX=y
CONFIG_DRM_MCDE=y
CONFIG_DRM_TIDSS=y
CONFIG_DRM_ZYNQMP_DPSUB=y
CONFIG_DRM_GUD=y
CONFIG_DRM_SSD130X=y
CONFIG_DRM_SSD130X_I2C=y
CONFIG_DRM_SSD130X_SPI=y
CONFIG_DRM_SPRD=y
CONFIG_DRM_LEGACY=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y
CONFIG_DRM_PRIVACY_SCREEN=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CLPS711X=y
CONFIG_FB_IMX=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=y
CONFIG_FB_CONTROL=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_UVESA=y
CONFIG_FB_GBE=y
CONFIG_FB_GBE_MEM=4
CONFIG_FB_PVR2=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_ATMEL=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_WM8505=y
CONFIG_FB_WMT_GE_ROPS=y
CONFIG_FB_PXA168=y
CONFIG_FB_W100=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_S3C=y
CONFIG_FB_S3C_DEBUG_REGWRITE=y
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=y
CONFIG_FB_DA8XX=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=y
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
CONFIG_FB_OMAP_LCD_H3=y
CONFIG_FB_OMAP2=y
CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
CONFIG_FB_OMAP2_NUM_FBS=3
CONFIG_FB_OMAP2_DSS_INIT=y
CONFIG_FB_OMAP2_DSS=y
CONFIG_FB_OMAP2_DSS_DEBUG=y
CONFIG_FB_OMAP2_DSS_DEBUGFS=y
CONFIG_FB_OMAP2_DSS_COLLECT_IRQ_STATS=y
CONFIG_FB_OMAP2_DSS_DPI=y
CONFIG_FB_OMAP2_DSS_VENC=y
CONFIG_FB_OMAP2_DSS_HDMI_COMMON=y
CONFIG_FB_OMAP4_DSS_HDMI=y
CONFIG_FB_OMAP5_DSS_HDMI=y
CONFIG_FB_OMAP2_DSS_SDI=y
CONFIG_FB_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
#
# OMAPFB Panel and Encoder Drivers
#
CONFIG_FB_OMAP2_ENCODER_OPA362=y
CONFIG_FB_OMAP2_ENCODER_TFP410=y
CONFIG_FB_OMAP2_ENCODER_TPD12S015=y
CONFIG_FB_OMAP2_CONNECTOR_DVI=y
CONFIG_FB_OMAP2_CONNECTOR_HDMI=y
CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=y
CONFIG_FB_OMAP2_PANEL_DPI=y
CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=y
# end of OMAPFB Panel and Encoder Drivers
CONFIG_MMP_DISP=y
CONFIG_MMP_DISP_CONTROLLER=y
CONFIG_MMP_DISP_SPI=y
CONFIG_MMP_PANEL_TPOHVGA=y
CONFIG_MMP_FB=y
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_AMS369FG06=y
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_LCD_OTM3225A=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_OMAP1=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_MT6370=y
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_RT4831=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
# end of Console display driver support
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_CTL_DEBUG=y
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_MIDI_EMUL=y
CONFIG_SND_SEQ_VIRMIDI=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_ALOOP=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_SERIAL_GENERIC=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=y
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5535AUDIO=y
CONFIG_SND_CTXFI=y
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
CONFIG_SND_INDIGOIOX=y
CONFIG_SND_INDIGODJX=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=y
#
# Don't forget to add built-in firmwares for HDSP driver
#
CONFIG_SND_HDSPM=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_LOLA=y
CONFIG_SND_LX6464ES=y
CONFIG_SND_MIXART=y
CONFIG_SND_NM256=y
CONFIG_SND_PCXHR=y
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
CONFIG_SND_VX222=y
CONFIG_SND_YMFPCI=y
#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_SCODEC_CS35L41=y
CONFIG_SND_HDA_CS_DSP_CONTROLS=y
CONFIG_SND_HDA_SCODEC_CS35L41_I2C=y
CONFIG_SND_HDA_SCODEC_CS35L41_SPI=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CS8409=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM=y
# end of HD-Audio
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_EXT_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=y
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=y
CONFIG_SND_PXA2XX_LIB=y
CONFIG_SND_SPI=y
CONFIG_SND_AT73C213=y
CONFIG_SND_AT73C213_TARGET_BITRATE=48000
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=y
CONFIG_SND_USB_6FIRE=y
CONFIG_SND_USB_HIFACE=y
CONFIG_SND_BCD2000=y
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
CONFIG_SND_USB_PODHD=y
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=y
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=y
CONFIG_SND_DICE=y
CONFIG_SND_OXFW=y
CONFIG_SND_ISIGHT=y
CONFIG_SND_FIREWORKS=y
CONFIG_SND_BEBOB=y
CONFIG_SND_FIREWIRE_DIGI00X=y
CONFIG_SND_FIREWIRE_TASCAM=y
CONFIG_SND_FIREWIRE_MOTU=y
CONFIG_SND_FIREFACE=y
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_TOPOLOGY_KUNIT_TEST=y
CONFIG_SND_SOC_UTILS_KUNIT_TEST=y
CONFIG_SND_SOC_ACPI=y
CONFIG_SND_SOC_ADI=y
CONFIG_SND_SOC_ADI_AXI_I2S=y
CONFIG_SND_SOC_ADI_AXI_SPDIF=y
CONFIG_SND_SOC_AMD_ACP=y
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=y
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=y
CONFIG_SND_SOC_AMD_ST_ES8336_MACH=y
CONFIG_SND_AMD_ACP_CONFIG=y
CONFIG_SND_SOC_APPLE_MCA=y
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_ATMEL_SOC_PDC=y
CONFIG_SND_ATMEL_SOC_DMA=y
CONFIG_SND_ATMEL_SOC_SSC=y
CONFIG_SND_ATMEL_SOC_SSC_PDC=y
CONFIG_SND_ATMEL_SOC_SSC_DMA=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
CONFIG_SND_ATMEL_SOC_WM8904=y
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
CONFIG_SND_ATMEL_SOC_CLASSD=y
CONFIG_SND_ATMEL_SOC_PDMIC=y
CONFIG_SND_ATMEL_SOC_I2S=y
CONFIG_SND_SOC_MIKROE_PROTO=y
CONFIG_SND_MCHP_SOC_I2S_MCC=y
CONFIG_SND_MCHP_SOC_SPDIFTX=y
CONFIG_SND_MCHP_SOC_SPDIFRX=y
CONFIG_SND_MCHP_SOC_PDMC=y
CONFIG_SND_BCM2835_SOC_I2S=y
CONFIG_SND_SOC_CYGNUS=y
CONFIG_SND_BCM63XX_I2S_WHISTLER=y
CONFIG_SND_EP93XX_SOC=y
CONFIG_SND_DESIGNWARE_I2S=y
CONFIG_SND_DESIGNWARE_PCM=y
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_MQS=y
CONFIG_SND_SOC_FSL_AUDMIX=y
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
CONFIG_SND_SOC_FSL_ESAI=y
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_FSL_EASRC=y
CONFIG_SND_SOC_FSL_XCVR=y
CONFIG_SND_SOC_FSL_AUD2HTX=y
CONFIG_SND_SOC_FSL_UTILS=y
CONFIG_SND_SOC_FSL_RPMSG=y
CONFIG_SND_SOC_IMX_PCM_DMA=y
CONFIG_SND_SOC_IMX_AUDIO_RPMSG=y
CONFIG_SND_SOC_IMX_PCM_RPMSG=y
CONFIG_SND_SOC_IMX_AUDMUX=y
CONFIG_SND_IMX_SOC=y
#
# SoC Audio support for Freescale i.MX boards:
#
CONFIG_SND_SOC_IMX_ES8328=y
CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_FSL_ASOC_CARD=y
CONFIG_SND_SOC_IMX_AUDMIX=y
CONFIG_SND_SOC_IMX_HDMI=y
CONFIG_SND_SOC_IMX_RPMSG=y
CONFIG_SND_SOC_IMX_CARD=y
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=y
CONFIG_SND_JZ4740_SOC_I2S=y
CONFIG_SND_KIRKWOOD_SOC=y
CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
CONFIG_SND_SOC_IMG_I2S_OUT=y
CONFIG_SND_SOC_IMG_PARALLEL_OUT=y
CONFIG_SND_SOC_IMG_SPDIF_IN=y
CONFIG_SND_SOC_IMG_SPDIF_OUT=y
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_INTEL_SST=y
CONFIG_SND_SOC_INTEL_SKYLAKE=y
CONFIG_SND_SOC_INTEL_SKL=y
CONFIG_SND_SOC_INTEL_APL=y
CONFIG_SND_SOC_INTEL_KBL=y
CONFIG_SND_SOC_INTEL_GLK=y
CONFIG_SND_SOC_INTEL_CNL=y
CONFIG_SND_SOC_INTEL_CFL=y
CONFIG_SND_SOC_INTEL_CML_H=y
CONFIG_SND_SOC_INTEL_CML_LP=y
CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=y
CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=y
CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y
CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=y
CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
CONFIG_SND_SOC_INTEL_KEEMBAY=y
CONFIG_SND_SOC_INTEL_AVS=y
#
# Intel AVS Machine drivers
#
#
# Available DSP configurations
#
CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219=y
CONFIG_SND_SOC_INTEL_AVS_MACH_DMIC=y
CONFIG_SND_SOC_INTEL_AVS_MACH_HDAUDIO=y
CONFIG_SND_SOC_INTEL_AVS_MACH_I2S_TEST=y
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98357A=y
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98373=y
CONFIG_SND_SOC_INTEL_AVS_MACH_NAU8825=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT274=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT286=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT298=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682=y
CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567=y
# end of Intel AVS Machine drivers
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_INTEL_HDA_DSP_COMMON=y
CONFIG_SND_SOC_INTEL_SOF_MAXIM_COMMON=y
CONFIG_SND_SOC_INTEL_SOF_REALTEK_COMMON=y
CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=y
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=y
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_WM5102_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=y
CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=y
CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=y
CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=y
CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH=y
CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=y
CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=y
CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=y
CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=y
CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=y
CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=y
CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=y
CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=y
CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=y
CONFIG_SND_SOC_MEDIATEK=y
CONFIG_SND_SOC_MT8186=y
CONFIG_SND_SOC_MT8186_MT6366_DA7219_MAX98357=y
CONFIG_SND_SOC_MT8186_MT6366_RT1019_RT5682S=y
CONFIG_SND_SOC_MTK_BTCVSD=y
CONFIG_SND_SOC_MT8195=y
CONFIG_SND_SOC_MT8195_MT6359=y
#
# ASoC support for Amlogic platforms
#
CONFIG_SND_MESON_AIU=y
CONFIG_SND_MESON_AXG_FIFO=y
CONFIG_SND_MESON_AXG_FRDDR=y
CONFIG_SND_MESON_AXG_TODDR=y
CONFIG_SND_MESON_AXG_TDM_FORMATTER=y
CONFIG_SND_MESON_AXG_TDM_INTERFACE=y
CONFIG_SND_MESON_AXG_TDMIN=y
CONFIG_SND_MESON_AXG_TDMOUT=y
CONFIG_SND_MESON_AXG_SOUND_CARD=y
CONFIG_SND_MESON_AXG_SPDIFOUT=y
CONFIG_SND_MESON_AXG_SPDIFIN=y
CONFIG_SND_MESON_AXG_PDM=y
CONFIG_SND_MESON_CARD_UTILS=y
CONFIG_SND_MESON_CODEC_GLUE=y
CONFIG_SND_MESON_GX_SOUND_CARD=y
CONFIG_SND_MESON_G12A_TOACODEC=y
CONFIG_SND_MESON_G12A_TOHDMITX=y
CONFIG_SND_SOC_MESON_T9015=y
# end of ASoC support for Amlogic platforms
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_SND_PXA2XX_SOC=y
CONFIG_SND_SOC_QCOM=y
CONFIG_SND_SOC_LPASS_CPU=y
CONFIG_SND_SOC_LPASS_HDMI=y
CONFIG_SND_SOC_LPASS_PLATFORM=y
CONFIG_SND_SOC_LPASS_CDC_DMA=y
CONFIG_SND_SOC_LPASS_IPQ806X=y
CONFIG_SND_SOC_LPASS_APQ8016=y
CONFIG_SND_SOC_LPASS_SC7180=y
CONFIG_SND_SOC_LPASS_SC7280=y
CONFIG_SND_SOC_STORM=y
CONFIG_SND_SOC_APQ8016_SBC=y
CONFIG_SND_SOC_QCOM_COMMON=y
CONFIG_SND_SOC_QDSP6_COMMON=y
CONFIG_SND_SOC_QDSP6_CORE=y
CONFIG_SND_SOC_QDSP6_AFE=y
CONFIG_SND_SOC_QDSP6_AFE_DAI=y
CONFIG_SND_SOC_QDSP6_AFE_CLOCKS=y
CONFIG_SND_SOC_QDSP6_ADM=y
CONFIG_SND_SOC_QDSP6_ROUTING=y
CONFIG_SND_SOC_QDSP6_ASM=y
CONFIG_SND_SOC_QDSP6_ASM_DAI=y
CONFIG_SND_SOC_QDSP6_APM_DAI=y
CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI=y
CONFIG_SND_SOC_QDSP6_APM=y
CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS=y
CONFIG_SND_SOC_QDSP6_PRM=y
CONFIG_SND_SOC_QDSP6=y
CONFIG_SND_SOC_MSM8996=y
CONFIG_SND_SOC_SDM845=y
CONFIG_SND_SOC_SM8250=y
CONFIG_SND_SOC_SC8280XP=y
CONFIG_SND_SOC_SC7180=y
CONFIG_SND_SOC_SC7280=y
CONFIG_SND_SOC_ROCKCHIP=y
CONFIG_SND_SOC_ROCKCHIP_I2S=y
CONFIG_SND_SOC_ROCKCHIP_I2S_TDM=y
CONFIG_SND_SOC_ROCKCHIP_PDM=y
CONFIG_SND_SOC_ROCKCHIP_SPDIF=y
CONFIG_SND_SOC_ROCKCHIP_MAX98090=y
CONFIG_SND_SOC_ROCKCHIP_RT5645=y
CONFIG_SND_SOC_RK3288_HDMI_ANALOG=y
CONFIG_SND_SOC_RK3399_GRU_SOUND=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_S3C24XX_I2S=y
CONFIG_SND_SAMSUNG_PCM=y
CONFIG_SND_SAMSUNG_SPDIF=y
CONFIG_SND_SAMSUNG_I2S=y
CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753=y
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8580=y
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y
CONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC_HERMES=y
CONFIG_SND_SOC_SAMSUNG_H1940_UDA1380=y
CONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380=y
CONFIG_SND_SOC_SMARTQ=y
CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=y
CONFIG_SND_SOC_SMDK_WM8994_PCM=y
CONFIG_SND_SOC_SPEYSIDE=y
CONFIG_SND_SOC_TOBERMORY=y
CONFIG_SND_SOC_BELLS=y
CONFIG_SND_SOC_LOWLAND=y
CONFIG_SND_SOC_LITTLEMILL=y
CONFIG_SND_SOC_SNOW=y
CONFIG_SND_SOC_ODROID=y
CONFIG_SND_SOC_ARNDALE=y
CONFIG_SND_SOC_SAMSUNG_TM2_WM5110=y
CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994=y
CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=y
#
# SoC Audio support for Renesas SoCs
#
CONFIG_SND_SOC_SH4_FSI=y
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_RZ=y
# end of SoC Audio support for Renesas SoCs
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI_DEV=y
CONFIG_SND_SOC_SOF_PCI=y
CONFIG_SND_SOC_SOF_ACPI=y
CONFIG_SND_SOC_SOF_ACPI_DEV=y
CONFIG_SND_SOC_SOF_OF=y
CONFIG_SND_SOC_SOF_OF_DEV=y
CONFIG_SND_SOC_SOF_COMPRESS=y
CONFIG_SND_SOC_SOF_DEBUG_PROBES=y
CONFIG_SND_SOC_SOF_CLIENT=y
CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT=y
CONFIG_SND_SOC_SOF_FORCE_PROBE_WORKQUEUE=y
CONFIG_SND_SOC_SOF_NOCODEC=y
CONFIG_SND_SOC_SOF_NOCODEC_SUPPORT=y
CONFIG_SND_SOC_SOF_STRICT_ABI_CHECKS=y
CONFIG_SND_SOC_SOF_DEBUG=y
CONFIG_SND_SOC_SOF_FORCE_NOCODEC_MODE=y
CONFIG_SND_SOC_SOF_DEBUG_XRUN_STOP=y
CONFIG_SND_SOC_SOF_DEBUG_VERBOSE_IPC=y
CONFIG_SND_SOC_SOF_DEBUG_FORCE_IPC_POSITION=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE=y
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST=y
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST_NUM=2
CONFIG_SND_SOC_SOF_DEBUG_IPC_MSG_INJECTOR=y
CONFIG_SND_SOC_SOF_DEBUG_RETAIN_DSP_CONTEXT=y
CONFIG_SND_SOC_SOF=y
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y
CONFIG_SND_SOC_SOF_IPC3=y
CONFIG_SND_SOC_SOF_INTEL_IPC4=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=y
CONFIG_SND_SOC_SOF_AMD_COMMON=y
CONFIG_SND_SOC_SOF_AMD_RENOIR=y
CONFIG_SND_SOC_SOF_AMD_REMBRANDT=y
CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
CONFIG_SND_SOC_SOF_IMX_COMMON=y
CONFIG_SND_SOC_SOF_IMX8=y
CONFIG_SND_SOC_SOF_IMX8M=y
CONFIG_SND_SOC_SOF_IMX8ULP=y
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=y
CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=y
CONFIG_SND_SOC_SOF_INTEL_COMMON=y
CONFIG_SND_SOC_SOF_BAYTRAIL=y
CONFIG_SND_SOC_SOF_BROADWELL=y
CONFIG_SND_SOC_SOF_MERRIFIELD=y
CONFIG_SND_SOC_SOF_INTEL_SKL=y
CONFIG_SND_SOC_SOF_SKYLAKE=y
CONFIG_SND_SOC_SOF_KABYLAKE=y
CONFIG_SND_SOC_SOF_INTEL_APL=y
CONFIG_SND_SOC_SOF_APOLLOLAKE=y
CONFIG_SND_SOC_SOF_GEMINILAKE=y
CONFIG_SND_SOC_SOF_INTEL_CNL=y
CONFIG_SND_SOC_SOF_CANNONLAKE=y
CONFIG_SND_SOC_SOF_COFFEELAKE=y
CONFIG_SND_SOC_SOF_COMETLAKE=y
CONFIG_SND_SOC_SOF_INTEL_ICL=y
CONFIG_SND_SOC_SOF_ICELAKE=y
CONFIG_SND_SOC_SOF_JASPERLAKE=y
CONFIG_SND_SOC_SOF_INTEL_TGL=y
CONFIG_SND_SOC_SOF_TIGERLAKE=y
CONFIG_SND_SOC_SOF_ELKHARTLAKE=y
CONFIG_SND_SOC_SOF_ALDERLAKE=y
CONFIG_SND_SOC_SOF_INTEL_MTL=y
CONFIG_SND_SOC_SOF_METEORLAKE=y
CONFIG_SND_SOC_SOF_HDA_COMMON=y
CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=y
CONFIG_SND_SOC_SOF_HDA_PROBES=y
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=y
CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y
CONFIG_SND_SOC_SOF_MTK_COMMON=y
CONFIG_SND_SOC_SOF_MT8186=y
CONFIG_SND_SOC_SOF_MT8195=y
CONFIG_SND_SOC_SOF_XTENSA=y
CONFIG_SND_SOC_SPRD=y
CONFIG_SND_SOC_SPRD_MCDT=y
CONFIG_SND_SOC_STI=y
#
# STMicroelectronics STM32 SOC audio support
#
CONFIG_SND_SOC_STM32_SAI=y
CONFIG_SND_SOC_STM32_I2S=y
CONFIG_SND_SOC_STM32_SPDIFRX=y
CONFIG_SND_SOC_STM32_DFSDM=y
# end of STMicroelectronics STM32 SOC audio support
#
# Allwinner SoC Audio support
#
CONFIG_SND_SUN4I_CODEC=y
CONFIG_SND_SUN8I_CODEC=y
CONFIG_SND_SUN8I_CODEC_ANALOG=y
CONFIG_SND_SUN50I_CODEC_ANALOG=y
CONFIG_SND_SUN4I_I2S=y
CONFIG_SND_SUN4I_SPDIF=y
CONFIG_SND_SUN50I_DMIC=y
CONFIG_SND_SUN8I_ADDA_PR_REGMAP=y
# end of Allwinner SoC Audio support
CONFIG_SND_SOC_TEGRA=y
CONFIG_SND_SOC_TEGRA20_AC97=y
CONFIG_SND_SOC_TEGRA20_DAS=y
CONFIG_SND_SOC_TEGRA20_I2S=y
CONFIG_SND_SOC_TEGRA20_SPDIF=y
CONFIG_SND_SOC_TEGRA30_AHUB=y
CONFIG_SND_SOC_TEGRA30_I2S=y
CONFIG_SND_SOC_TEGRA210_AHUB=y
CONFIG_SND_SOC_TEGRA210_DMIC=y
CONFIG_SND_SOC_TEGRA210_I2S=y
CONFIG_SND_SOC_TEGRA210_OPE=y
CONFIG_SND_SOC_TEGRA186_ASRC=y
CONFIG_SND_SOC_TEGRA186_DSPK=y
CONFIG_SND_SOC_TEGRA210_ADMAIF=y
CONFIG_SND_SOC_TEGRA210_MVC=y
CONFIG_SND_SOC_TEGRA210_SFC=y
CONFIG_SND_SOC_TEGRA210_AMX=y
CONFIG_SND_SOC_TEGRA210_ADX=y
CONFIG_SND_SOC_TEGRA210_MIXER=y
CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=y
CONFIG_SND_SOC_TEGRA_MACHINE_DRV=y
CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_WM9712=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_SND_SOC_TEGRA_MAX98090=y
CONFIG_SND_SOC_TEGRA_RT5677=y
CONFIG_SND_SOC_TEGRA_SGTL5000=y
#
# Audio support for Texas Instruments SoCs
#
CONFIG_SND_SOC_TI_EDMA_PCM=y
CONFIG_SND_SOC_TI_SDMA_PCM=y
CONFIG_SND_SOC_TI_UDMA_PCM=y
#
# Texas Instruments DAI support for:
#
CONFIG_SND_SOC_DAVINCI_ASP=y
CONFIG_SND_SOC_DAVINCI_MCASP=y
CONFIG_SND_SOC_DAVINCI_VCIF=y
CONFIG_SND_SOC_OMAP_DMIC=y
CONFIG_SND_SOC_OMAP_MCBSP=y
CONFIG_SND_SOC_OMAP_MCPDM=y
#
# Audio support for boards with Texas Instruments SoCs
#
CONFIG_SND_SOC_OMAP3_TWL4030=y
CONFIG_SND_SOC_OMAP_ABE_TWL6040=y
CONFIG_SND_SOC_OMAP_HDMI=y
CONFIG_SND_SOC_J721E_EVM=y
# end of Audio support for Texas Instruments SoCs
CONFIG_SND_SOC_UNIPHIER=y
CONFIG_SND_SOC_UNIPHIER_AIO=y
CONFIG_SND_SOC_UNIPHIER_LD11=y
CONFIG_SND_SOC_UNIPHIER_PXS2=y
CONFIG_SND_SOC_UNIPHIER_EVEA_CODEC=y
CONFIG_SND_SOC_XILINX_I2S=y
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
CONFIG_SND_SOC_ALL_CODECS=y
CONFIG_SND_SOC_88PM860X=y
CONFIG_SND_SOC_ARIZONA=y
CONFIG_SND_SOC_WM_HUBS=y
CONFIG_SND_SOC_WM_ADSP=y
CONFIG_SND_SOC_AB8500_CODEC=y
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_AD1836=y
CONFIG_SND_SOC_AD193X=y
CONFIG_SND_SOC_AD193X_SPI=y
CONFIG_SND_SOC_AD193X_I2C=y
CONFIG_SND_SOC_AD1980=y
CONFIG_SND_SOC_AD73311=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1372_SPI=y
CONFIG_SND_SOC_ADAU1373=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
CONFIG_SND_SOC_ADAU1761_SPI=y
CONFIG_SND_SOC_ADAU1781=y
CONFIG_SND_SOC_ADAU1781_I2C=y
CONFIG_SND_SOC_ADAU1781_SPI=y
CONFIG_SND_SOC_ADAU1977=y
CONFIG_SND_SOC_ADAU1977_SPI=y
CONFIG_SND_SOC_ADAU1977_I2C=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_ADAU7118=y
CONFIG_SND_SOC_ADAU7118_HW=y
CONFIG_SND_SOC_ADAU7118_I2C=y
CONFIG_SND_SOC_ADAV80X=y
CONFIG_SND_SOC_ADAV801=y
CONFIG_SND_SOC_ADAV803=y
CONFIG_SND_SOC_ADS117X=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4118=y
CONFIG_SND_SOC_AK4375=y
CONFIG_SND_SOC_AK4458=y
CONFIG_SND_SOC_AK4535=y
CONFIG_SND_SOC_AK4554=y
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4641=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK4671=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_ALC5632=y
CONFIG_SND_SOC_AW8738=y
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CPCAP=y
CONFIG_SND_SOC_CQ0093VC=y
CONFIG_SND_SOC_CROS_EC_CODEC=y
CONFIG_SND_SOC_CS35L32=y
CONFIG_SND_SOC_CS35L33=y
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=y
CONFIG_SND_SOC_CS35L41_LIB=y
CONFIG_SND_SOC_CS35L41=y
CONFIG_SND_SOC_CS35L41_SPI=y
CONFIG_SND_SOC_CS35L41_I2C=y
CONFIG_SND_SOC_CS35L45_TABLES=y
CONFIG_SND_SOC_CS35L45=y
CONFIG_SND_SOC_CS35L45_SPI=y
CONFIG_SND_SOC_CS35L45_I2C=y
CONFIG_SND_SOC_CS42L42_CORE=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
CONFIG_SND_SOC_CS42L52=y
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS42L83=y
CONFIG_SND_SOC_CS4234=y
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS4271_SPI=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS47L15=y
CONFIG_SND_SOC_CS47L24=y
CONFIG_SND_SOC_CS47L35=y
CONFIG_SND_SOC_CS47L85=y
CONFIG_SND_SOC_CS47L90=y
CONFIG_SND_SOC_CS47L92=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX20442=y
CONFIG_SND_SOC_CX2072X=y
CONFIG_SND_SOC_JZ4740_CODEC=y
CONFIG_SND_SOC_JZ4725B_CODEC=y
CONFIG_SND_SOC_JZ4760_CODEC=y
CONFIG_SND_SOC_JZ4770_CODEC=y
CONFIG_SND_SOC_L3=y
CONFIG_SND_SOC_DA7210=y
CONFIG_SND_SOC_DA7213=y
CONFIG_SND_SOC_DA7218=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DA732X=y
CONFIG_SND_SOC_DA9055=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8326=y
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
CONFIG_SND_SOC_ES8328_SPI=y
CONFIG_SND_SOC_GTM601=y
CONFIG_SND_SOC_HDAC_HDMI=y
CONFIG_SND_SOC_HDAC_HDA=y
CONFIG_SND_SOC_HDA=y
CONFIG_SND_SOC_ICS43432=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_ISABELLE=y
CONFIG_SND_SOC_LM49453=y
CONFIG_SND_SOC_LOCHNAGAR_SC=y
CONFIG_SND_SOC_MADERA=y
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98095=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98371=y
CONFIG_SND_SOC_MAX98504=y
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98925=y
CONFIG_SND_SOC_MAX98926=y
CONFIG_SND_SOC_MAX98927=y
CONFIG_SND_SOC_MAX98520=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX98373_I2C=y
CONFIG_SND_SOC_MAX98373_SDW=y
CONFIG_SND_SOC_MAX98390=y
CONFIG_SND_SOC_MAX98396=y
CONFIG_SND_SOC_MAX9850=y
CONFIG_SND_SOC_MAX9860=y
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=y
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM186X_SPI=y
CONFIG_SND_SOC_PCM3008=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3060_SPI=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM5102A=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_PCM512x_SPI=y
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RK817=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RL6347A=y
CONFIG_SND_SOC_RT274=y
CONFIG_SND_SOC_RT286=y
CONFIG_SND_SOC_RT298=y
CONFIG_SND_SOC_RT1011=y
CONFIG_SND_SOC_RT1015=y
CONFIG_SND_SOC_RT1015P=y
CONFIG_SND_SOC_RT1016=y
CONFIG_SND_SOC_RT1019=y
CONFIG_SND_SOC_RT1305=y
CONFIG_SND_SOC_RT1308=y
CONFIG_SND_SOC_RT1308_SDW=y
CONFIG_SND_SOC_RT1316_SDW=y
CONFIG_SND_SOC_RT5514=y
CONFIG_SND_SOC_RT5514_SPI=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_RT5651=y
CONFIG_SND_SOC_RT5659=y
CONFIG_SND_SOC_RT5660=y
CONFIG_SND_SOC_RT5663=y
CONFIG_SND_SOC_RT5665=y
CONFIG_SND_SOC_RT5668=y
CONFIG_SND_SOC_RT5670=y
CONFIG_SND_SOC_RT5677=y
CONFIG_SND_SOC_RT5677_SPI=y
CONFIG_SND_SOC_RT5682=y
CONFIG_SND_SOC_RT5682_I2C=y
CONFIG_SND_SOC_RT5682_SDW=y
CONFIG_SND_SOC_RT5682S=y
CONFIG_SND_SOC_RT700=y
CONFIG_SND_SOC_RT700_SDW=y
CONFIG_SND_SOC_RT711=y
CONFIG_SND_SOC_RT711_SDW=y
CONFIG_SND_SOC_RT711_SDCA_SDW=y
CONFIG_SND_SOC_RT715=y
CONFIG_SND_SOC_RT715_SDW=y
CONFIG_SND_SOC_RT715_SDCA_SDW=y
CONFIG_SND_SOC_RT9120=y
CONFIG_SND_SOC_SDW_MOCKUP=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SI476X=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIMPLE_MUX=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SRC4XXX_I2C=y
CONFIG_SND_SOC_SRC4XXX=y
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2518=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STA529=y
CONFIG_SND_SOC_STAC9766=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
CONFIG_SND_SOC_TAS2562=y
CONFIG_SND_SOC_TAS2764=y
CONFIG_SND_SOC_TAS2770=y
CONFIG_SND_SOC_TAS2780=y
CONFIG_SND_SOC_TAS5086=y
CONFIG_SND_SOC_TAS571X=y
CONFIG_SND_SOC_TAS5720=y
CONFIG_SND_SOC_TAS5805M=y
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TFA989X=y
CONFIG_SND_SOC_TLV320ADC3XXX=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC26=y
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
CONFIG_SND_SOC_TLV320AIC32X4_SPI=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TLV320AIC3X_I2C=y
CONFIG_SND_SOC_TLV320AIC3X_SPI=y
CONFIG_SND_SOC_TLV320DAC33=y
CONFIG_SND_SOC_TLV320ADCX140=y
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_TWL4030=y
CONFIG_SND_SOC_TWL6040=y
CONFIG_SND_SOC_UDA1334=y
CONFIG_SND_SOC_UDA134X=y
CONFIG_SND_SOC_UDA1380=y
CONFIG_SND_SOC_WCD9335=y
CONFIG_SND_SOC_WCD_MBHC=y
CONFIG_SND_SOC_WCD934X=y
CONFIG_SND_SOC_WCD938X=y
CONFIG_SND_SOC_WCD938X_SDW=y
CONFIG_SND_SOC_WL1273=y
CONFIG_SND_SOC_WM0010=y
CONFIG_SND_SOC_WM1250_EV1=y
CONFIG_SND_SOC_WM2000=y
CONFIG_SND_SOC_WM2200=y
CONFIG_SND_SOC_WM5100=y
CONFIG_SND_SOC_WM5102=y
CONFIG_SND_SOC_WM5110=y
CONFIG_SND_SOC_WM8350=y
CONFIG_SND_SOC_WM8400=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8727=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8731_I2C=y
CONFIG_SND_SOC_WM8731_SPI=y
CONFIG_SND_SOC_WM8737=y
CONFIG_SND_SOC_WM8741=y
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8770=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8804_SPI=y
CONFIG_SND_SOC_WM8900=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8940=y
CONFIG_SND_SOC_WM8955=y
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8961=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8971=y
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8983=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_WM8988=y
CONFIG_SND_SOC_WM8990=y
CONFIG_SND_SOC_WM8991=y
CONFIG_SND_SOC_WM8993=y
CONFIG_SND_SOC_WM8994=y
CONFIG_SND_SOC_WM8995=y
CONFIG_SND_SOC_WM8996=y
CONFIG_SND_SOC_WM8997=y
CONFIG_SND_SOC_WM8998=y
CONFIG_SND_SOC_WM9081=y
CONFIG_SND_SOC_WM9090=y
CONFIG_SND_SOC_WM9705=y
CONFIG_SND_SOC_WM9712=y
CONFIG_SND_SOC_WM9713=y
CONFIG_SND_SOC_WSA881X=y
CONFIG_SND_SOC_WSA883X=y
CONFIG_SND_SOC_ZL38060=y
CONFIG_SND_SOC_LM4857=y
CONFIG_SND_SOC_MAX9759=y
CONFIG_SND_SOC_MAX9768=y
CONFIG_SND_SOC_MAX9877=y
CONFIG_SND_SOC_MC13783=y
CONFIG_SND_SOC_ML26124=y
CONFIG_SND_SOC_MT6351=y
CONFIG_SND_SOC_MT6358=y
CONFIG_SND_SOC_MT6359=y
CONFIG_SND_SOC_MT6359_ACCDET=y
CONFIG_SND_SOC_MT6660=y
CONFIG_SND_SOC_NAU8315=y
CONFIG_SND_SOC_NAU8540=y
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8821=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_NAU8825=y
CONFIG_SND_SOC_TPA6130A2=y
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
CONFIG_SND_SOC_LPASS_WSA_MACRO=y
CONFIG_SND_SOC_LPASS_VA_MACRO=y
CONFIG_SND_SOC_LPASS_RX_MACRO=y
CONFIG_SND_SOC_LPASS_TX_MACRO=y
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD2=y
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=y
CONFIG_SND_TEST_COMPONENT=y
CONFIG_SND_VIRTIO=y
CONFIG_AC97_BUS=y
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACCUTOUCH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BETOP_FF=y
CONFIG_HID_BIGBEN_FF=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
CONFIG_HID_COUGAR=y
CONFIG_HID_MACALLY=y
CONFIG_HID_PRODIKEYS=y
CONFIG_HID_CMEDIA=y
CONFIG_HID_CP2112=y
CONFIG_HID_CREATIVE_SB0540=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELAN=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
CONFIG_HID_FT260=y
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=y
CONFIG_HID_GLORIOUS=y
CONFIG_HID_HOLTEK=y
CONFIG_HOLTEK_FF=y
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_GOOGLE_HAMMER=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_GT683R=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_VRC2=y
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LETSKETCH=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_HID_LOGITECH_HIDPP=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_MEGAWORLD_FF=y
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=y
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_PXRC=y
CONFIG_HID_RAZER=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_RETRODE=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SEMITEK=y
CONFIG_HID_SIGMAMICRO=y
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_TOPRE=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_U2FZERO=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y
CONFIG_HID_MCP2221=y
CONFIG_HID_KUNIT_TEST=y
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID_ACPI=y
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_ELAN=y
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support
CONFIG_I2C_HID_CORE=y
#
# Intel ISH HID support
#
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
CONFIG_AMD_SFH_HID=y
# end of AMD SFH HID Support
#
# Surface System Aggregator Module HID support
#
CONFIG_SURFACE_HID=y
CONFIG_SURFACE_KBD=y
# end of Surface System Aggregator Module HID support
CONFIG_SURFACE_HID_CORE=y
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_FEW_INIT_RETRIES=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_OTG_FSM=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_XHCI_HISTB=y
CONFIG_USB_XHCI_MTK=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_RCAR=y
CONFIG_USB_EHCI_BRCMSTB=y
CONFIG_USB_BRCMSTB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_NPCM7XX=y
CONFIG_USB_EHCI_HCD_OMAP=y
CONFIG_USB_EHCI_HCD_ORION=y
CONFIG_USB_EHCI_HCD_SPEAR=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_AT91=y
CONFIG_USB_EHCI_SH=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_MV=y
CONFIG_USB_CNS3XXX_EHCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_MAX3421_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SPEAR=y
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_S3C2410=y
CONFIG_USB_OHCI_HCD_LPC32XX=y
CONFIG_USB_OHCI_HCD_AT91=y
CONFIG_USB_OHCI_HCD_OMAP3=y
CONFIG_USB_OHCI_HCD_DAVINCI=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_SH=y
CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_CNS3XXX_OHCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_RENESAS_USBHS_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y
CONFIG_USB_RENESAS_USBHS=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
CONFIG_USBIP_CORE=y
CONFIG_USBIP_VHCI_HCD=y
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=y
CONFIG_USBIP_VUDC=y
CONFIG_USBIP_DEBUG=y
CONFIG_USB_CDNS_SUPPORT=y
CONFIG_USB_CDNS_HOST=y
CONFIG_USB_CDNS3=y
CONFIG_USB_CDNS3_GADGET=y
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_PCI_WRAP=y
CONFIG_USB_CDNS3_TI=y
CONFIG_USB_CDNS3_IMX=y
CONFIG_USB_CDNSP_PCI=y
CONFIG_USB_CDNSP_GADGET=y
CONFIG_USB_CDNSP_HOST=y
CONFIG_USB_MTU3=y
# CONFIG_USB_MTU3_HOST is not set
# CONFIG_USB_MTU3_GADGET is not set
CONFIG_USB_MTU3_DUAL_ROLE=y
CONFIG_USB_MTU3_DEBUG=y
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
#
# Platform Glue Layer
#
CONFIG_USB_MUSB_TUSB6010=y
CONFIG_USB_MUSB_DSPS=y
CONFIG_USB_MUSB_UX500=y
CONFIG_USB_MUSB_MEDIATEK=y
CONFIG_USB_MUSB_POLARFIRE_SOC=y
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_EXYNOS=y
CONFIG_USB_DWC3_PCI=y
CONFIG_USB_DWC3_HAPS=y
CONFIG_USB_DWC3_KEYSTONE=y
CONFIG_USB_DWC3_MESON_G12A=y
CONFIG_USB_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC3_ST=y
CONFIG_USB_DWC3_QCOM=y
CONFIG_USB_DWC3_IMX8MP=y
CONFIG_USB_DWC3_AM62=y
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
CONFIG_USB_DWC2_PCI=y
CONFIG_USB_DWC2_DEBUG=y
CONFIG_USB_DWC2_VERBOSE=y
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
CONFIG_USB_DWC2_DEBUG_PERIODIC=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_PCI=y
CONFIG_USB_CHIPIDEA_MSM=y
CONFIG_USB_CHIPIDEA_IMX=y
CONFIG_USB_CHIPIDEA_GENERIC=y
CONFIG_USB_CHIPIDEA_TEGRA=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_F8153X=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MXUPORT=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_UPD78F0730=y
CONFIG_USB_SERIAL_XR=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_QCOM_EUD=y
CONFIG_APPLE_MFI_FASTCHARGE=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_LINK_LAYER_TEST=y
CONFIG_USB_CHAOSKEY=y
CONFIG_BRCM_USB_PINMAP=y
CONFIG_USB_ONBOARD_HUB=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=y
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=y
CONFIG_AM335X_PHY_USB=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MV_OTG=y
CONFIG_USB_TEGRA_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_JZ4770_PHY=y
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y
#
# USB Peripheral Controller
#
CONFIG_USB_LPC32XX=y
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
CONFIG_USB_RENESAS_USBHS_UDC=y
CONFIG_USB_RENESAS_USB3=y
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
CONFIG_USB_MV_U3D=y
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
CONFIG_USB_M66592=y
CONFIG_USB_BDC_UDC=y
CONFIG_USB_AMD5536UDC=y
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=y
CONFIG_USB_GOKU=y
CONFIG_USB_EG20T=y
CONFIG_USB_GADGET_XILINX=y
CONFIG_USB_MAX3420_UDC=y
CONFIG_USB_ASPEED_UDC=y
CONFIG_USB_ASPEED_VHUB=y
CONFIG_USB_DUMMY_HCD=y
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_F_SS_LB=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_U_AUDIO=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_NCM=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_PHONET=y
CONFIG_USB_F_EEM=y
CONFIG_USB_F_SUBSET=y
CONFIG_USB_F_RNDIS=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_UAC1=y
CONFIG_USB_F_UAC1_LEGACY=y
CONFIG_USB_F_UAC2=y
CONFIG_USB_F_UVC=y
CONFIG_USB_F_MIDI=y
CONFIG_USB_F_HID=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_F_TCM=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y
#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=y
CONFIG_USB_ZERO_HNPTEST=y
CONFIG_USB_AUDIO=y
CONFIG_GADGET_UAC1=y
CONFIG_GADGET_UAC1_LEGACY=y
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=y
CONFIG_USB_GADGETFS=y
CONFIG_USB_FUNCTIONFS=y
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=y
CONFIG_USB_GADGET_TARGET=y
CONFIG_USB_G_SERIAL=y
CONFIG_USB_MIDI_GADGET=y
CONFIG_USB_G_PRINTER=y
CONFIG_USB_CDC_COMPOSITE=y
CONFIG_USB_G_NOKIA=y
CONFIG_USB_G_ACM_MS=y
CONFIG_USB_G_MULTI=y
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=y
CONFIG_USB_G_DBGP=y
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=y
CONFIG_USB_RAW_GADGET=y
# end of USB Gadget precomposed configurations
CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
CONFIG_TYPEC_RT1711H=y
CONFIG_TYPEC_MT6360=y
CONFIG_TYPEC_TCPCI_MT6370=y
CONFIG_TYPEC_TCPCI_MAXIM=y
CONFIG_TYPEC_FUSB302=y
CONFIG_TYPEC_UCSI=y
CONFIG_UCSI_CCG=y
CONFIG_UCSI_ACPI=y
CONFIG_UCSI_STM32G0=y
CONFIG_TYPEC_TPS6598X=y
CONFIG_TYPEC_ANX7411=y
CONFIG_TYPEC_RT1719=y
CONFIG_TYPEC_HD3SS3220=y
CONFIG_TYPEC_STUSB160X=y
CONFIG_TYPEC_QCOM_PMIC=y
CONFIG_TYPEC_WUSB3801=y
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=y
CONFIG_TYPEC_MUX_PI3USB30532=y
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=y
CONFIG_TYPEC_NVIDIA_ALTMODE=y
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SD8787=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y
CONFIG_MMC_CRYPTO=y
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_ASPEED=y
CONFIG_MMC_SDHCI_OF_ASPEED_TEST=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_MMC_SDHCI_OF_DWCMSHC=y
CONFIG_MMC_SDHCI_OF_SPARX5=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_CNS3XXX=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_SDHCI_PXAV2=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_SDHCI_S3C_DMA=y
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_MILBEAUT=y
CONFIG_MMC_SDHCI_IPROC=y
CONFIG_MMC_MESON_GX=y
CONFIG_MMC_MESON_MX_SDHC=y
CONFIG_MMC_MESON_MX_SDIO=y
CONFIG_MMC_MOXART=y
CONFIG_MMC_SDHCI_ST=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_ALCOR=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_DAVINCI=y
CONFIG_MMC_SPI=y
CONFIG_MMC_S3C=y
CONFIG_MMC_S3C_HW_SDIO_IRQ=y
CONFIG_MMC_S3C_PIO=y
# CONFIG_MMC_S3C_DMA is not set
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_SDHCI_SPRD=y
CONFIG_MMC_TMIO_CORE=y
CONFIG_MMC_TMIO=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SDHI_SYS_DMAC=y
CONFIG_MMC_SDHI_INTERNAL_DMAC=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_CAVIUM_THUNDERX=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_BLUEFIELD=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_HI3798CV200=y
CONFIG_MMC_DW_K3=y
CONFIG_MMC_DW_PCI=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_REALTEK_PCI=y
CONFIG_MMC_REALTEK_USB=y
CONFIG_MMC_SUNXI=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_TOSHIBA_PCI=y
CONFIG_MMC_BCM2835=y
CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_SDHCI_OMAP=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MMC_OWL=y
CONFIG_MMC_SDHCI_EXTERNAL_DMA=y
CONFIG_MMC_LITEX=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_CRYPTO=y
CONFIG_SCSI_UFS_HPB=y
CONFIG_SCSI_UFS_FAULT_INJECTION=y
CONFIG_SCSI_UFS_HWMON=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_UFS_DWC_TC_PCI=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_CDNS_PLATFORM=y
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
CONFIG_SCSI_UFS_HISI=y
CONFIG_SCSI_UFS_RENESAS=y
CONFIG_SCSI_UFS_TI_J721E=y
CONFIG_SCSI_UFS_EXYNOS=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_MEMSTICK_REALTEK_PCI=y
CONFIG_MEMSTICK_REALTEK_USB=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AN30259A=y
CONFIG_LEDS_ARIEL=y
CONFIG_LEDS_AW2013=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_CPCAP=y
CONFIG_LEDS_CR0014114=y
CONFIG_LEDS_EL15203000=y
CONFIG_LEDS_TURRIS_OMNIA=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
CONFIG_LEDS_S3C24XX=y
CONFIG_LEDS_COBALT_QUBE=y
CONFIG_LEDS_COBALT_RAQ=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_ASIC3=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77650=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
CONFIG_LEDS_MENF21BMC=y
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
CONFIG_LEDS_SC27XX_BLTC=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_PM8058=y
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_SPI_BYTE=y
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
CONFIG_LEDS_LM36274=y
CONFIG_LEDS_TPS6105X=y
CONFIG_LEDS_IP30=y
CONFIG_LEDS_ACER_A500=y
CONFIG_LEDS_BCM63138=y
CONFIG_LEDS_LGM=y
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_MT6360=y
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=y
CONFIG_LEDS_SGM3140=y
#
# RGB LED drivers
#
CONFIG_LEDS_PWM_MULTICOLOR=y
CONFIG_LEDS_QCOM_LPG=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=y
#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SERIALIO=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=y
CONFIG_SPEAKUP_SYNTH_ACNTPC=y
CONFIG_SPEAKUP_SYNTH_APOLLO=y
CONFIG_SPEAKUP_SYNTH_AUDPTR=y
CONFIG_SPEAKUP_SYNTH_BNS=y
CONFIG_SPEAKUP_SYNTH_DECTLK=y
CONFIG_SPEAKUP_SYNTH_DECEXT=y
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=y
CONFIG_SPEAKUP_SYNTH_KEYPC=y
CONFIG_SPEAKUP_SYNTH_LTLK=y
CONFIG_SPEAKUP_SYNTH_SOFT=y
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
CONFIG_SPEAKUP_SYNTH_TXPRT=y
CONFIG_SPEAKUP_SYNTH_DUMMY=y
# end of Speakup console speech
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_BNXT_RE=y
CONFIG_INFINIBAND_CXGB4=y
CONFIG_INFINIBAND_EFA=y
CONFIG_INFINIBAND_ERDMA=y
CONFIG_INFINIBAND_HNS=y
CONFIG_INFINIBAND_HNS_HIP08=y
CONFIG_INFINIBAND_IRDMA=y
CONFIG_MLX4_INFINIBAND=y
CONFIG_MLX5_INFINIBAND=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=y
CONFIG_INFINIBAND_QEDR=y
CONFIG_INFINIBAND_USNIC=y
CONFIG_INFINIBAND_VMWARE_PVRDMA=y
CONFIG_RDMA_RXE=y
CONFIG_RDMA_SIW=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_SRPT=y
CONFIG_INFINIBAND_ISER=y
CONFIG_INFINIBAND_ISERT=y
CONFIG_INFINIBAND_RTRS=y
CONFIG_INFINIBAND_RTRS_CLIENT=y
CONFIG_INFINIBAND_RTRS_SERVER=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
CONFIG_RTC_LIB_KUNIT_TEST=y
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
CONFIG_RTC_DRV_BRCMSTB=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_LP8788=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_MAX8997=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_NCT3018Y=y
CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12026=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BD70528=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_RC5T619=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=y
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=y
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6916=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y
CONFIG_RTC_DRV_RX6110=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_GAMECUBE=y
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_WM8350=y
CONFIG_RTC_DRV_SC27XX=y
CONFIG_RTC_DRV_SPEAR=y
CONFIG_RTC_DRV_PCF50633=y
CONFIG_RTC_DRV_ZYNQMP=y
CONFIG_RTC_DRV_CROS_EC=y
CONFIG_RTC_DRV_NTXEC=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=y
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=y
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
CONFIG_RTC_DRV_MESON=y
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_RTC_DRV_S3C=y
CONFIG_RTC_DRV_EP93XX=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_RTC_DRV_RZN1=y
CONFIG_RTC_DRV_GENERIC=y
CONFIG_RTC_DRV_VT8500=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_ARMADA38X=y
CONFIG_RTC_DRV_CADENCE=y
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_DRV_STMP=y
CONFIG_RTC_DRV_PCAP=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_JZ4740=y
CONFIG_RTC_DRV_LPC24XX=y
CONFIG_RTC_DRV_LPC32XX=y
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_MXC_V2=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_RTC_DRV_MOXART=y
CONFIG_RTC_DRV_MT2712=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_MT7622=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_R7301=y
CONFIG_RTC_DRV_STM32=y
CONFIG_RTC_DRV_CPCAP=y
CONFIG_RTC_DRV_RTD119X=y
CONFIG_RTC_DRV_ASPEED=y
CONFIG_RTC_DRV_TI_K3=y
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
CONFIG_RTC_DRV_GOLDFISH=y
CONFIG_RTC_DRV_WILCO_EC=y
CONFIG_RTC_DRV_MSC313=y
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_APPLE_ADMAC=y
CONFIG_AXI_DMAC=y
CONFIG_BCM_SBA_RAID=y
CONFIG_DMA_JZ4780=y
CONFIG_DMA_SA11X0=y
CONFIG_DMA_SUN6I=y
CONFIG_DW_AXI_DMAC=y
CONFIG_EP93XX_DMA=y
CONFIG_FSL_EDMA=y
CONFIG_HISI_DMA=y
CONFIG_IMG_MDC_DMA=y
CONFIG_INTEL_IDMA64=y
CONFIG_INTEL_IOP_ADMA=y
CONFIG_K3_DMA=y
CONFIG_MCF_EDMA=y
CONFIG_MILBEAUT_HDMAC=y
CONFIG_MILBEAUT_XDMAC=y
CONFIG_MMP_PDMA=y
CONFIG_MMP_TDMA=y
CONFIG_MV_XOR=y
CONFIG_MXS_DMA=y
CONFIG_NBPFAXI_DMA=y
CONFIG_PCH_DMA=y
CONFIG_PLX_DMA=y
CONFIG_STM32_DMA=y
CONFIG_STM32_DMAMUX=y
CONFIG_STM32_MDMA=y
CONFIG_SPRD_DMA=y
CONFIG_S3C24XX_DMAC=y
CONFIG_TEGRA186_GPC_DMA=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_TEGRA210_ADMA=y
CONFIG_TIMB_DMA=y
CONFIG_UNIPHIER_MDMAC=y
CONFIG_UNIPHIER_XDMAC=y
CONFIG_XGENE_DMA=y
CONFIG_XILINX_ZYNQMP_DMA=y
CONFIG_XILINX_ZYNQMP_DPDMA=y
CONFIG_MTK_HSDMA=y
CONFIG_MTK_CQDMA=y
CONFIG_MTK_UART_APDMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_RZN1_DMAMUX=y
CONFIG_DW_DMAC_PCI=y
CONFIG_DW_EDMA=y
CONFIG_DW_EDMA_PCIE=y
CONFIG_HSU_DMA=y
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
CONFIG_SH_DMAE=y
CONFIG_RCAR_DMAC=y
CONFIG_RENESAS_USB_DMAC=y
CONFIG_RZ_DMAC=y
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
CONFIG_INTEL_LDMA=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_IMG_ASCII_LCD=y
CONFIG_HT16K33=y
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
CONFIG_UIO_PRUSS=y
CONFIG_UIO_MF624=y
CONFIG_UIO_DFL=y
CONFIG_VFIO=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=y
CONFIG_MLX5_VFIO_PCI=y
CONFIG_HISI_ACC_VFIO_PCI=y
CONFIG_VFIO_PLATFORM=y
CONFIG_VFIO_AMBA=y
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=y
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=y
CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET=y
CONFIG_VFIO_MDEV=y
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_VDPA=y
CONFIG_VIRTIO_PMEM=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
CONFIG_VDPA=y
CONFIG_VDPA_SIM=y
CONFIG_VDPA_SIM_NET=y
CONFIG_VDPA_SIM_BLOCK=y
CONFIG_VDPA_USER=y
CONFIG_IFCVF=y
CONFIG_MLX5_VDPA=y
CONFIG_MLX5_VDPA_NET=y
CONFIG_VP_VDPA=y
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST_RING=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=y
CONFIG_VHOST_SCSI=y
CONFIG_VHOST_VSOCK=y
CONFIG_VHOST_VDPA=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=y
CONFIG_COMEDI_TEST=y
CONFIG_COMEDI_PARPORT=y
CONFIG_COMEDI_SSV_DNP=y
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=y
CONFIG_COMEDI_PCL726=y
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=y
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
CONFIG_COMEDI_PCM3724=y
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
CONFIG_COMEDI_AMPLC_PC236_ISA=y
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=y
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
CONFIG_COMEDI_DAS16M1=y
CONFIG_COMEDI_DAS08_ISA=y
CONFIG_COMEDI_DAS16=y
CONFIG_COMEDI_DAS800=y
CONFIG_COMEDI_DAS1800=y
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
CONFIG_COMEDI_DT2811=y
CONFIG_COMEDI_DT2814=y
CONFIG_COMEDI_DT2815=y
CONFIG_COMEDI_DT2817=y
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=y
CONFIG_COMEDI_FL512=y
CONFIG_COMEDI_AIO_AIO12_8=y
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=y
CONFIG_COMEDI_C6XDIGIO=y
CONFIG_COMEDI_MPC624=y
CONFIG_COMEDI_ADQ12B=y
CONFIG_COMEDI_NI_AT_A2150=y
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
CONFIG_COMEDI_NI_LABPC_ISA=y
CONFIG_COMEDI_PCMAD=y
CONFIG_COMEDI_PCMDA12=y
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=y
CONFIG_COMEDI_MULTIQ3=y
CONFIG_COMEDI_S526=y
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=y
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=y
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
CONFIG_COMEDI_ADDI_APCI_1564=y
CONFIG_COMEDI_ADDI_APCI_16XX=y
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
CONFIG_COMEDI_ADDI_APCI_3120=y
CONFIG_COMEDI_ADDI_APCI_3501=y
CONFIG_COMEDI_ADDI_APCI_3XXX=y
CONFIG_COMEDI_ADL_PCI6208=y
CONFIG_COMEDI_ADL_PCI7X3X=y
CONFIG_COMEDI_ADL_PCI8164=y
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=y
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=y
CONFIG_COMEDI_ADV_PCI1723=y
CONFIG_COMEDI_ADV_PCI1724=y
CONFIG_COMEDI_ADV_PCI1760=y
CONFIG_COMEDI_ADV_PCI_DIO=y
CONFIG_COMEDI_AMPLC_DIO200_PCI=y
CONFIG_COMEDI_AMPLC_PC236_PCI=y
CONFIG_COMEDI_AMPLC_PC263_PCI=y
CONFIG_COMEDI_AMPLC_PCI224=y
CONFIG_COMEDI_AMPLC_PCI230=y
CONFIG_COMEDI_CONTEC_PCI_DIO=y
CONFIG_COMEDI_DAS08_PCI=y
CONFIG_COMEDI_DT3000=y
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=y
CONFIG_COMEDI_MF6X4=y
CONFIG_COMEDI_ICP_MULTI=y
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
CONFIG_COMEDI_KE_COUNTER=y
CONFIG_COMEDI_CB_PCIDAS64=y
CONFIG_COMEDI_CB_PCIDAS=y
CONFIG_COMEDI_CB_PCIDDA=y
CONFIG_COMEDI_CB_PCIMDAS=y
CONFIG_COMEDI_CB_PCIMDDA=y
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
CONFIG_COMEDI_NI_6527=y
CONFIG_COMEDI_NI_65XX=y
CONFIG_COMEDI_NI_660X=y
CONFIG_COMEDI_NI_670X=y
CONFIG_COMEDI_NI_LABPC_PCI=y
CONFIG_COMEDI_NI_PCIDIO=y
CONFIG_COMEDI_NI_PCIMIO=y
CONFIG_COMEDI_RTD520=y
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
CONFIG_COMEDI_PCMCIA_DRIVERS=y
CONFIG_COMEDI_CB_DAS16_CS=y
CONFIG_COMEDI_DAS08_CS=y
CONFIG_COMEDI_NI_DAQ_700_CS=y
CONFIG_COMEDI_NI_DAQ_DIO24_CS=y
CONFIG_COMEDI_NI_LABPC_CS=y
CONFIG_COMEDI_NI_MIO_CS=y
CONFIG_COMEDI_QUATECH_DAQP_CS=y
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=y
CONFIG_COMEDI_NI_USB6501=y
CONFIG_COMEDI_USBDUX=y
CONFIG_COMEDI_USBDUXFAST=y
CONFIG_COMEDI_USBDUXSIGMA=y
CONFIG_COMEDI_VMK80XX=y
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=y
CONFIG_COMEDI_TESTS_NI_ROUTES=y
CONFIG_STAGING=y
CONFIG_PRISM2_USB=y
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_RTL8723BS=m
CONFIG_R8712U=y
CONFIG_R8188EU=m
CONFIG_RTS5208=y
CONFIG_OCTEON_ETHERNET=y
CONFIG_VT6655=m
CONFIG_VT6656=m
#
# IIO staging drivers
#
#
# Accelerometers
#
CONFIG_ADIS16203=y
CONFIG_ADIS16240=y
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7816=y
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_SPI=y
CONFIG_ADT7316_I2C=y
# end of Analog digital bi-direction converters
#
# Direct Digital Synthesis
#
CONFIG_AD9832=y
CONFIG_AD9834=y
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
CONFIG_ADE7854_SPI=y
# end of Active energy metering IC
#
# Resolver to digital converters
#
CONFIG_AD2S1210=y
# end of Resolver to digital converters
# end of IIO staging drivers
CONFIG_FB_SM750=y
CONFIG_USB_EMXX=y
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_IMX_MEDIA=y
#
# i.MX5/6/7/8 Media Sub devices
#
CONFIG_VIDEO_IMX_CSI=y
CONFIG_VIDEO_IMX7_CSI=y
# end of i.MX5/6/7/8 Media Sub devices
CONFIG_VIDEO_MAX96712=y
CONFIG_VIDEO_MESON_VDEC=y
CONFIG_VIDEO_OMAP4=y
CONFIG_VIDEO_ROCKCHIP_VDEC=y
CONFIG_VIDEO_SUNXI=y
CONFIG_VIDEO_SUNXI_CEDRUS=y
CONFIG_STAGING_MEDIA_DEPRECATED=y
CONFIG_VIDEO_CPIA2=y
CONFIG_VIDEO_VIU=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=y
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_PATCH=y
CONFIG_DVB_SP8870=y
CONFIG_VIDEO_HEXIUM_GEMINI=y
CONFIG_VIDEO_HEXIUM_ORION=y
CONFIG_VIDEO_MXB=y
CONFIG_DVB_BUDGET_CORE=y
CONFIG_DVB_BUDGET=y
CONFIG_DVB_BUDGET_CI=y
CONFIG_DVB_BUDGET_AV=y
CONFIG_VIDEO_STKWEBCAM=y
CONFIG_VIDEO_TM6000=y
CONFIG_VIDEO_TM6000_ALSA=y
CONFIG_VIDEO_TM6000_DVB=y
CONFIG_VIDEO_DM6446_CCDC=y
CONFIG_VIDEO_DM355_CCDC=y
CONFIG_VIDEO_DM365_ISIF=y
CONFIG_USB_ZR364XX=y
CONFIG_STAGING_BOARD=y
CONFIG_LTE_GDM724X=m
CONFIG_FB_TFT=y
CONFIG_FB_TFT_AGM1264K_FL=y
CONFIG_FB_TFT_BD663474=y
CONFIG_FB_TFT_HX8340BN=y
CONFIG_FB_TFT_HX8347D=y
CONFIG_FB_TFT_HX8353D=y
CONFIG_FB_TFT_HX8357D=y
CONFIG_FB_TFT_ILI9163=y
CONFIG_FB_TFT_ILI9320=y
CONFIG_FB_TFT_ILI9325=y
CONFIG_FB_TFT_ILI9340=y
CONFIG_FB_TFT_ILI9341=y
CONFIG_FB_TFT_ILI9481=y
CONFIG_FB_TFT_ILI9486=y
CONFIG_FB_TFT_PCD8544=y
CONFIG_FB_TFT_RA8875=y
CONFIG_FB_TFT_S6D02A1=y
CONFIG_FB_TFT_S6D1121=y
CONFIG_FB_TFT_SEPS525=y
CONFIG_FB_TFT_SH1106=y
CONFIG_FB_TFT_SSD1289=y
CONFIG_FB_TFT_SSD1305=y
CONFIG_FB_TFT_SSD1306=y
CONFIG_FB_TFT_SSD1331=y
CONFIG_FB_TFT_SSD1351=y
CONFIG_FB_TFT_ST7735R=y
CONFIG_FB_TFT_ST7789V=y
CONFIG_FB_TFT_TINYLCD=y
CONFIG_FB_TFT_TLS8204=y
CONFIG_FB_TFT_UC1611=y
CONFIG_FB_TFT_UC1701=y
CONFIG_FB_TFT_UPD161704=y
CONFIG_MOST_COMPONENTS=y
CONFIG_MOST_NET=y
CONFIG_MOST_VIDEO=y
CONFIG_MOST_DIM2=y
CONFIG_MOST_I2C=y
CONFIG_KS7010=y
CONFIG_GREYBUS_AUDIO=y
CONFIG_GREYBUS_AUDIO_APB_CODEC=y
CONFIG_GREYBUS_BOOTROM=y
CONFIG_GREYBUS_FIRMWARE=y
CONFIG_GREYBUS_HID=y
CONFIG_GREYBUS_LIGHT=y
CONFIG_GREYBUS_LOG=y
CONFIG_GREYBUS_LOOPBACK=y
CONFIG_GREYBUS_POWER=y
CONFIG_GREYBUS_RAW=y
CONFIG_GREYBUS_VIBRATOR=y
CONFIG_GREYBUS_BRIDGED_PHY=y
CONFIG_GREYBUS_GPIO=y
CONFIG_GREYBUS_I2C=y
CONFIG_GREYBUS_PWM=y
CONFIG_GREYBUS_SDIO=y
CONFIG_GREYBUS_SPI=y
CONFIG_GREYBUS_UART=y
CONFIG_GREYBUS_USB=y
CONFIG_GREYBUS_ARCHE=y
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=y
CONFIG_VCHIQ_CDEV=y
CONFIG_SND_BCM2835=y
CONFIG_VIDEO_BCM2835=y
CONFIG_BCM2835_VCHIQ_MMAL=y
CONFIG_PI433=y
CONFIG_XIL_AXIS_FIFO=y
CONFIG_FIELDBUS_DEV=y
CONFIG_HMS_ANYBUSS_BUS=y
CONFIG_ARCX_ANYBUS_CONTROLLER=y
CONFIG_HMS_PROFINET=y
CONFIG_QLGE=y
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
CONFIG_VME_TSI148=y
CONFIG_VME_FAKE=y
#
# VME Device Drivers
#
CONFIG_VME_USER=y
CONFIG_GOLDFISH=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_ACPI=y
CONFIG_CHROMEOS_TBMC=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_RPMSG=y
CONFIG_CROS_EC_SPI=y
CONFIG_CROS_EC_LPC=y
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
CONFIG_CROS_EC_CHARDEV=y
CONFIG_CROS_EC_LIGHTBAR=y
CONFIG_CROS_EC_VBC=y
CONFIG_CROS_EC_DEBUGFS=y
CONFIG_CROS_EC_SENSORHUB=y
CONFIG_CROS_EC_SYSFS=y
CONFIG_CROS_EC_TYPEC=y
CONFIG_CROS_USBPD_LOGGER=y
CONFIG_CROS_USBPD_NOTIFY=y
CONFIG_CHROMEOS_PRIVACY_SCREEN=y
CONFIG_CROS_TYPEC_SWITCH=y
CONFIG_WILCO_EC=y
CONFIG_WILCO_EC_DEBUGFS=y
CONFIG_WILCO_EC_EVENTS=y
CONFIG_WILCO_EC_TELEMETRY=y
CONFIG_CROS_KUNIT=y
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=y
CONFIG_MLXREG_LC=y
CONFIG_NVSW_SN2201=y
CONFIG_OLPC_EC=y
CONFIG_OLPC_XO175=y
CONFIG_OLPC_XO175_EC=y
CONFIG_SURFACE_PLATFORMS=y
CONFIG_SURFACE_3_POWER_OPREGION=y
CONFIG_SURFACE_ACPI_NOTIFY=y
CONFIG_SURFACE_AGGREGATOR_CDEV=y
CONFIG_SURFACE_AGGREGATOR_HUB=y
CONFIG_SURFACE_AGGREGATOR_REGISTRY=y
CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH=y
CONFIG_SURFACE_DTX=y
CONFIG_SURFACE_GPE=y
CONFIG_SURFACE_HOTPLUG=y
CONFIG_SURFACE_PLATFORM_PROFILE=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_SURFACE_AGGREGATOR=y
CONFIG_SURFACE_AGGREGATOR_BUS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y
#
# Clock driver for ARM Reference designs
#
CONFIG_CLK_ICST=y
CONFIG_CLK_SP810=y
# end of Clock driver for ARM Reference designs
CONFIG_CLK_HSDK=y
CONFIG_LMK04832=y
CONFIG_COMMON_CLK_APPLE_NCO=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_HI655X=y
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_BM1880=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_TPS68470=y
CONFIG_COMMON_CLK_CDCE925=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_EN7523=y
CONFIG_COMMON_CLK_FSL_FLEXSPI=y
CONFIG_COMMON_CLK_FSL_SAI=y
CONFIG_COMMON_CLK_GEMINI=y
CONFIG_COMMON_CLK_LAN966X=y
CONFIG_COMMON_CLK_ASPEED=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_TWL6040=y
CONFIG_COMMON_CLK_AXI_CLKGEN=y
CONFIG_CLK_QORIQ=y
CONFIG_CLK_LS1028A_PLLDIG=y
CONFIG_COMMON_CLK_XGENE=y
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PALMAS=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_OXNAS=y
CONFIG_COMMON_CLK_RS9_PCIE=y
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_VC7=y
CONFIG_COMMON_CLK_MMP2_AUDIO=y
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_ACTIONS=y
CONFIG_CLK_OWL_S500=y
CONFIG_CLK_OWL_S700=y
CONFIG_CLK_OWL_S900=y
CONFIG_CLK_ANALOGBITS_WRPLL_CLN28HPC=y
CONFIG_CLK_BAIKAL_T1=y
CONFIG_CLK_BT1_CCU_PLL=y
CONFIG_CLK_BT1_CCU_DIV=y
CONFIG_CLK_BT1_CCU_RST=y
CONFIG_CLK_BCM2711_DVP=y
CONFIG_CLK_BCM2835=y
CONFIG_CLK_BCM_63XX=y
CONFIG_CLK_BCM_63XX_GATE=y
CONFIG_CLK_BCM_KONA=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
CONFIG_CLK_BCM_HR2=y
CONFIG_CLK_BCM_NSP=y
CONFIG_CLK_BCM_NS2=y
CONFIG_CLK_BCM_SR=y
CONFIG_CLK_RASPBERRYPI=y
CONFIG_COMMON_CLK_HI3516CV300=y
CONFIG_COMMON_CLK_HI3519=y
CONFIG_COMMON_CLK_HI3559A=y
CONFIG_COMMON_CLK_HI3660=y
CONFIG_COMMON_CLK_HI3670=y
CONFIG_COMMON_CLK_HI3798CV200=y
CONFIG_COMMON_CLK_HI6220=y
CONFIG_RESET_HISI=y
CONFIG_STUB_CLK_HI6220=y
CONFIG_STUB_CLK_HI3660=y
CONFIG_COMMON_CLK_BOSTON=y
CONFIG_MXC_CLK=y
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MN=y
CONFIG_CLK_IMX8MP=y
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8ULP=y
CONFIG_CLK_IMX93=y
#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
CONFIG_INGENIC_CGU_JZ4740=y
CONFIG_INGENIC_CGU_JZ4725B=y
CONFIG_INGENIC_CGU_JZ4760=y
CONFIG_INGENIC_CGU_JZ4770=y
CONFIG_INGENIC_CGU_JZ4780=y
CONFIG_INGENIC_CGU_X1000=y
CONFIG_INGENIC_CGU_X1830=y
CONFIG_INGENIC_TCU_CLK=y
# end of Ingenic SoCs drivers
CONFIG_COMMON_CLK_KEYSTONE=y
CONFIG_TI_SYSCON_CLK=y
#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
CONFIG_COMMON_CLK_MT2701_MMSYS=y
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
CONFIG_COMMON_CLK_MT2701_ETHSYS=y
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
CONFIG_COMMON_CLK_MT2701_AUDSYS=y
CONFIG_COMMON_CLK_MT2701_G3DSYS=y
CONFIG_COMMON_CLK_MT2712=y
CONFIG_COMMON_CLK_MT2712_BDPSYS=y
CONFIG_COMMON_CLK_MT2712_IMGSYS=y
CONFIG_COMMON_CLK_MT2712_JPGDECSYS=y
CONFIG_COMMON_CLK_MT2712_MFGCFG=y
CONFIG_COMMON_CLK_MT2712_MMSYS=y
CONFIG_COMMON_CLK_MT2712_VDECSYS=y
CONFIG_COMMON_CLK_MT2712_VENCSYS=y
CONFIG_COMMON_CLK_MT6765=y
CONFIG_COMMON_CLK_MT6765_AUDIOSYS=y
CONFIG_COMMON_CLK_MT6765_CAMSYS=y
CONFIG_COMMON_CLK_MT6765_GCESYS=y
CONFIG_COMMON_CLK_MT6765_MMSYS=y
CONFIG_COMMON_CLK_MT6765_IMGSYS=y
CONFIG_COMMON_CLK_MT6765_VCODECSYS=y
CONFIG_COMMON_CLK_MT6765_MFGSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI0ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI0BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI2ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI2BSYS=y
CONFIG_COMMON_CLK_MT6779=y
CONFIG_COMMON_CLK_MT6779_MMSYS=y
CONFIG_COMMON_CLK_MT6779_IMGSYS=y
CONFIG_COMMON_CLK_MT6779_IPESYS=y
CONFIG_COMMON_CLK_MT6779_CAMSYS=y
CONFIG_COMMON_CLK_MT6779_VDECSYS=y
CONFIG_COMMON_CLK_MT6779_VENCSYS=y
CONFIG_COMMON_CLK_MT6779_MFGCFG=y
CONFIG_COMMON_CLK_MT6779_AUDSYS=y
CONFIG_COMMON_CLK_MT6795=y
CONFIG_COMMON_CLK_MT6795_MFGCFG=y
CONFIG_COMMON_CLK_MT6795_MMSYS=y
CONFIG_COMMON_CLK_MT6795_VDECSYS=y
CONFIG_COMMON_CLK_MT6795_VENCSYS=y
CONFIG_COMMON_CLK_MT6797=y
CONFIG_COMMON_CLK_MT6797_MMSYS=y
CONFIG_COMMON_CLK_MT6797_IMGSYS=y
CONFIG_COMMON_CLK_MT6797_VDECSYS=y
CONFIG_COMMON_CLK_MT6797_VENCSYS=y
CONFIG_COMMON_CLK_MT7622=y
CONFIG_COMMON_CLK_MT7622_ETHSYS=y
CONFIG_COMMON_CLK_MT7622_HIFSYS=y
CONFIG_COMMON_CLK_MT7622_AUDSYS=y
CONFIG_COMMON_CLK_MT7629=y
CONFIG_COMMON_CLK_MT7629_ETHSYS=y
CONFIG_COMMON_CLK_MT7629_HIFSYS=y
CONFIG_COMMON_CLK_MT7986=y
CONFIG_COMMON_CLK_MT7986_ETHSYS=y
CONFIG_COMMON_CLK_MT8135=y
CONFIG_COMMON_CLK_MT8167=y
CONFIG_COMMON_CLK_MT8167_AUDSYS=y
CONFIG_COMMON_CLK_MT8167_IMGSYS=y
CONFIG_COMMON_CLK_MT8167_MFGCFG=y
CONFIG_COMMON_CLK_MT8167_MMSYS=y
CONFIG_COMMON_CLK_MT8167_VDECSYS=y
CONFIG_COMMON_CLK_MT8173=y
CONFIG_COMMON_CLK_MT8173_MMSYS=y
CONFIG_COMMON_CLK_MT8183=y
CONFIG_COMMON_CLK_MT8183_AUDIOSYS=y
CONFIG_COMMON_CLK_MT8183_CAMSYS=y
CONFIG_COMMON_CLK_MT8183_IMGSYS=y
CONFIG_COMMON_CLK_MT8183_IPU_CORE0=y
CONFIG_COMMON_CLK_MT8183_IPU_CORE1=y
CONFIG_COMMON_CLK_MT8183_IPU_ADL=y
CONFIG_COMMON_CLK_MT8183_IPU_CONN=y
CONFIG_COMMON_CLK_MT8183_MFGCFG=y
CONFIG_COMMON_CLK_MT8183_MMSYS=y
CONFIG_COMMON_CLK_MT8183_VDECSYS=y
CONFIG_COMMON_CLK_MT8183_VENCSYS=y
CONFIG_COMMON_CLK_MT8186=y
CONFIG_COMMON_CLK_MT8192=y
CONFIG_COMMON_CLK_MT8192_AUDSYS=y
CONFIG_COMMON_CLK_MT8192_CAMSYS=y
CONFIG_COMMON_CLK_MT8192_IMGSYS=y
CONFIG_COMMON_CLK_MT8192_IMP_IIC_WRAP=y
CONFIG_COMMON_CLK_MT8192_IPESYS=y
CONFIG_COMMON_CLK_MT8192_MDPSYS=y
CONFIG_COMMON_CLK_MT8192_MFGCFG=y
CONFIG_COMMON_CLK_MT8192_MMSYS=y
CONFIG_COMMON_CLK_MT8192_MSDC=y
CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
CONFIG_COMMON_CLK_MT8192_VDECSYS=y
CONFIG_COMMON_CLK_MT8192_VENCSYS=y
CONFIG_COMMON_CLK_MT8195=y
CONFIG_COMMON_CLK_MT8365=y
CONFIG_COMMON_CLK_MT8365_APU=y
CONFIG_COMMON_CLK_MT8365_CAM=y
CONFIG_COMMON_CLK_MT8365_MFG=y
CONFIG_COMMON_CLK_MT8365_MMSYS=y
CONFIG_COMMON_CLK_MT8365_VDEC=y
CONFIG_COMMON_CLK_MT8365_VENC=y
CONFIG_COMMON_CLK_MT8516=y
CONFIG_COMMON_CLK_MT8516_AUDSYS=y
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
# CONFIG_COMMON_CLK_AXG_AUDIO is not set
# end of Clock support for Amlogic platforms
CONFIG_MSTAR_MSC313_MPLL=y
CONFIG_MCHP_CLK_MPFS=y
CONFIG_COMMON_CLK_PISTACHIO=y
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_RPMCC=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_A7PLL=y
CONFIG_QCOM_CLK_APCS_MSM8916=y
CONFIG_QCOM_CLK_APCS_SDX55=y
CONFIG_QCOM_CLK_SMD_RPM=y
CONFIG_QCOM_CLK_RPMH=y
CONFIG_APQ_GCC_8084=y
CONFIG_APQ_MMCC_8084=y
CONFIG_IPQ_APSS_PLL=y
CONFIG_IPQ_APSS_6018=y
CONFIG_IPQ_GCC_4019=y
CONFIG_IPQ_GCC_6018=y
CONFIG_IPQ_GCC_806X=y
CONFIG_IPQ_LCC_806X=y
CONFIG_IPQ_GCC_8074=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_GCC_8909=y
CONFIG_MSM_GCC_8916=y
CONFIG_MSM_GCC_8939=y
CONFIG_MSM_GCC_8960=y
CONFIG_MSM_LCC_8960=y
CONFIG_MDM_GCC_9607=y
CONFIG_MDM_GCC_9615=y
CONFIG_MDM_LCC_9615=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_GCC_8953=y
CONFIG_MSM_GCC_8974=y
CONFIG_MSM_MMCC_8974=y
CONFIG_MSM_GCC_8976=y
CONFIG_MSM_MMCC_8994=y
CONFIG_MSM_GCC_8994=y
CONFIG_MSM_GCC_8996=y
CONFIG_MSM_MMCC_8996=y
CONFIG_MSM_GCC_8998=y
CONFIG_MSM_GPUCC_8998=y
CONFIG_MSM_MMCC_8998=y
CONFIG_QCM_GCC_2290=y
CONFIG_QCM_DISPCC_2290=y
CONFIG_QCS_GCC_404=y
CONFIG_SC_CAMCC_7180=y
CONFIG_SC_CAMCC_7280=y
CONFIG_SC_DISPCC_7180=y
CONFIG_SC_DISPCC_7280=y
CONFIG_SC_GCC_7180=y
CONFIG_SC_GCC_7280=y
CONFIG_SC_GCC_8180X=y
CONFIG_SC_GCC_8280XP=y
CONFIG_SC_GPUCC_7180=y
CONFIG_SC_GPUCC_7280=y
CONFIG_SC_GPUCC_8280XP=y
CONFIG_SC_LPASSCC_7280=y
CONFIG_SC_LPASS_CORECC_7180=y
CONFIG_SC_LPASS_CORECC_7280=y
CONFIG_SC_MSS_7180=y
CONFIG_SC_VIDEOCC_7180=y
CONFIG_SC_VIDEOCC_7280=y
CONFIG_SDM_CAMCC_845=y
CONFIG_SDM_GCC_660=y
CONFIG_SDM_MMCC_660=y
CONFIG_SDM_GPUCC_660=y
CONFIG_QCS_TURING_404=y
CONFIG_QCS_Q6SSTOP_404=y
CONFIG_SDM_GCC_845=y
CONFIG_SDM_GPUCC_845=y
CONFIG_SDM_VIDEOCC_845=y
CONFIG_SDM_DISPCC_845=y
CONFIG_SDM_LPASSCC_845=y
CONFIG_SDX_GCC_55=y
CONFIG_SDX_GCC_65=y
CONFIG_SM_CAMCC_8250=y
CONFIG_SM_CAMCC_8450=y
CONFIG_SM_DISPCC_6115=y
CONFIG_SM_DISPCC_6125=y
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_DISPCC_6350=y
CONFIG_SM_DISPCC_8450=y
CONFIG_SM_GCC_6115=y
CONFIG_SM_GCC_6125=y
CONFIG_SM_GCC_6350=y
CONFIG_SM_GCC_6375=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_SM_GCC_8350=y
CONFIG_SM_GCC_8450=y
CONFIG_SM_GPUCC_6350=y
CONFIG_SM_GPUCC_8150=y
CONFIG_SM_GPUCC_8250=y
CONFIG_SM_GPUCC_8350=y
CONFIG_SM_VIDEOCC_8150=y
CONFIG_SM_VIDEOCC_8250=y
CONFIG_SPMI_PMIC_CLKDIV=y
CONFIG_QCOM_HFPLL=y
CONFIG_KPSS_XCC=y
CONFIG_CLK_GFM_LPASS_SM8250=y
CONFIG_CLK_MT7621=y
CONFIG_CLK_RENESAS=y
CONFIG_CLK_EMEV2=y
CONFIG_CLK_RZA1=y
CONFIG_CLK_R7S9210=y
CONFIG_CLK_R8A73A4=y
CONFIG_CLK_R8A7740=y
CONFIG_CLK_R8A7742=y
CONFIG_CLK_R8A7743=y
CONFIG_CLK_R8A7745=y
CONFIG_CLK_R8A77470=y
CONFIG_CLK_R8A774A1=y
CONFIG_CLK_R8A774B1=y
CONFIG_CLK_R8A774C0=y
CONFIG_CLK_R8A774E1=y
CONFIG_CLK_R8A7778=y
CONFIG_CLK_R8A7779=y
CONFIG_CLK_R8A7790=y
CONFIG_CLK_R8A7791=y
CONFIG_CLK_R8A7792=y
CONFIG_CLK_R8A7794=y
CONFIG_CLK_R8A7795=y
CONFIG_CLK_R8A77960=y
CONFIG_CLK_R8A77961=y
CONFIG_CLK_R8A77965=y
CONFIG_CLK_R8A77970=y
CONFIG_CLK_R8A77980=y
CONFIG_CLK_R8A77990=y
CONFIG_CLK_R8A77995=y
CONFIG_CLK_R8A779A0=y
CONFIG_CLK_R8A779F0=y
CONFIG_CLK_R8A779G0=y
CONFIG_CLK_R9A06G032=y
CONFIG_CLK_R9A07G043=y
CONFIG_CLK_R9A07G044=y
CONFIG_CLK_R9A07G054=y
CONFIG_CLK_R9A09G011=y
CONFIG_CLK_SH73A0=y
CONFIG_CLK_RCAR_CPG_LIB=y
CONFIG_CLK_RCAR_GEN2_CPG=y
CONFIG_CLK_RCAR_GEN3_CPG=y
CONFIG_CLK_RCAR_GEN4_CPG=y
CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
CONFIG_CLK_RZG2L=y
CONFIG_CLK_RENESAS_CPG_MSSR=y
CONFIG_CLK_RENESAS_CPG_MSTP=y
CONFIG_CLK_RENESAS_DIV6=y
CONFIG_COMMON_CLK_SAMSUNG=y
CONFIG_S3C64XX_COMMON_CLK=y
CONFIG_S5PV210_COMMON_CLK=y
CONFIG_EXYNOS_3250_COMMON_CLK=y
CONFIG_EXYNOS_4_COMMON_CLK=y
CONFIG_EXYNOS_5250_COMMON_CLK=y
CONFIG_EXYNOS_5260_COMMON_CLK=y
CONFIG_EXYNOS_5410_COMMON_CLK=y
CONFIG_EXYNOS_5420_COMMON_CLK=y
CONFIG_EXYNOS_ARM64_COMMON_CLK=y
CONFIG_EXYNOS_AUDSS_CLK_CON=y
CONFIG_EXYNOS_CLKOUT=y
CONFIG_S3C2410_COMMON_CLK=y
CONFIG_S3C2412_COMMON_CLK=y
CONFIG_S3C2443_COMMON_CLK=y
CONFIG_TESLA_FSD_COMMON_CLK=y
CONFIG_CLK_SIFIVE=y
CONFIG_CLK_SIFIVE_PRCI=y
CONFIG_CLK_INTEL_SOCFPGA=y
CONFIG_CLK_INTEL_SOCFPGA32=y
CONFIG_CLK_INTEL_SOCFPGA64=y
CONFIG_SPRD_COMMON_CLK=y
CONFIG_SPRD_SC9860_CLK=y
CONFIG_SPRD_SC9863A_CLK=y
CONFIG_SPRD_UMS512_CLK=y
CONFIG_CLK_STARFIVE_JH7100=y
CONFIG_CLK_STARFIVE_JH7100_AUDIO=y
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
CONFIG_SUNXI_CCU=y
CONFIG_SUNIV_F1C100S_CCU=y
CONFIG_SUN20I_D1_CCU=y
CONFIG_SUN20I_D1_R_CCU=y
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_A100_CCU=y
CONFIG_SUN50I_A100_R_CCU=y
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H616_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
CONFIG_SUN4I_A10_CCU=y
CONFIG_SUN5I_CCU=y
CONFIG_SUN6I_A31_CCU=y
CONFIG_SUN6I_RTC_CCU=y
CONFIG_SUN8I_A23_CCU=y
CONFIG_SUN8I_A33_CCU=y
CONFIG_SUN8I_A83T_CCU=y
CONFIG_SUN8I_H3_CCU=y
CONFIG_SUN8I_V3S_CCU=y
CONFIG_SUN8I_DE2_CCU=y
CONFIG_SUN8I_R40_CCU=y
CONFIG_SUN9I_A80_CCU=y
CONFIG_SUN8I_R_CCU=y
CONFIG_COMMON_CLK_TI_ADPLL=y
CONFIG_CLK_UNIPHIER=y
CONFIG_COMMON_CLK_VISCONTI=y
CONFIG_CLK_LGM_CGU=y
CONFIG_XILINX_VCU=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_OMAP=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HWSPINLOCK_SPRD=y
CONFIG_HWSPINLOCK_STM32=y
CONFIG_HWSPINLOCK_SUN6I=y
CONFIG_HSEM_U8500=y
CONFIG_MAILBOX=y
CONFIG_IMX_MBOX=y
CONFIG_PLATFORM_MHU=y
CONFIG_ARMADA_37XX_RWTM_MBOX=y
CONFIG_ROCKCHIP_MBOX=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_HI3660_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_MAILBOX_TEST=y
CONFIG_POLARFIRE_SOC_MAILBOX=y
CONFIG_QCOM_APCS_IPC=y
CONFIG_BCM_PDC_MBOX=y
CONFIG_STM32_IPCC=y
CONFIG_MTK_ADSP_MBOX=y
CONFIG_MTK_CMDQ_MBOX=y
CONFIG_SUN6I_MSGBOX=y
CONFIG_SPRD_MBOX=y
CONFIG_QCOM_IPCC=y
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST=y
CONFIG_IOMMU_IO_PGTABLE_DART=y
# end of Generic IOMMU Pagetable Support
CONFIG_IOMMU_DEBUGFS=y
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
CONFIG_DMAR_TABLE=y
CONFIG_DMAR_PERF=y
CONFIG_DMAR_DEBUG=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEBUGFS=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
CONFIG_OMAP_IOMMU=y
CONFIG_OMAP_IOMMU_DEBUG=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_SUN50I_IOMMU=y
CONFIG_EXYNOS_IOMMU=y
CONFIG_EXYNOS_IOMMU_DEBUG=y
CONFIG_IPMMU_VMSA=y
CONFIG_APPLE_DART=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS=y
CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
CONFIG_S390_CCW_IOMMU=y
CONFIG_S390_AP_IOMMU=y
CONFIG_MTK_IOMMU=y
CONFIG_QCOM_IOMMU=y
CONFIG_SPRD_IOMMU=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
CONFIG_INGENIC_VPU_RPROC=y
CONFIG_MTK_SCP=y
CONFIG_MESON_MX_AO_ARC_REMOTEPROC=y
CONFIG_RCAR_REMOTEPROC=y
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_MTK_SCP=y
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_QCOM_GLINK_SMEM=y
CONFIG_RPMSG_QCOM_SMD=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_CADENCE=y
CONFIG_SOUNDWIRE_INTEL=y
CONFIG_SOUNDWIRE_QCOM=y
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=y
#
# SOC (System On Chip) specific Drivers
#
CONFIG_OWL_PM_DOMAINS_HELPER=y
CONFIG_OWL_PM_DOMAINS=y
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
CONFIG_MESON_CLK_MEASURE=y
CONFIG_MESON_GX_SOCINFO=y
CONFIG_MESON_GX_PM_DOMAINS=y
CONFIG_MESON_EE_PM_DOMAINS=y
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
CONFIG_APPLE_PMGR_PWRSTATE=y
CONFIG_APPLE_RTKIT=y
CONFIG_APPLE_SART=y
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=y
CONFIG_ASPEED_LPC_SNOOP=y
CONFIG_ASPEED_UART_ROUTING=y
CONFIG_ASPEED_P2A_CTRL=y
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers
CONFIG_AT91_SOC_ID=y
CONFIG_AT91_SOC_SFR=y
#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_SOC_BCM63XX=y
CONFIG_SOC_BRCMSTB=y
CONFIG_BCM63XX_POWER=y
CONFIG_BCM_PMB=y
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_QUICC_ENGINE=y
CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_QE_TDM=y
CONFIG_FSL_GUTS=y
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
CONFIG_IMX_GPCV2_PM_DOMAINS=y
CONFIG_SOC_IMX8M=y
CONFIG_SOC_IMX9=y
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
CONFIG_MTK_CMDQ=y
CONFIG_MTK_DEVAPC=y
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=y
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_SCPSYS_PM_DOMAINS=y
CONFIG_MTK_MMSYS=y
CONFIG_MTK_SVS=y
# end of MediaTek SoC drivers
CONFIG_POLARFIRE_SOC_SYS_CTRL=y
#
# Qualcomm SoC drivers
#
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_LLCC=y
CONFIG_QCOM_PDR_HELPERS=y
CONFIG_QCOM_QMI_HELPERS=y
CONFIG_QCOM_RPMH=y
CONFIG_QCOM_RPMHPD=y
CONFIG_QCOM_RPMPD=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMEM_STATE=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
CONFIG_QCOM_SOCINFO=y
CONFIG_QCOM_SPM=y
CONFIG_QCOM_STATS=y
CONFIG_QCOM_WCNSS_CTRL=y
CONFIG_QCOM_APR=y
CONFIG_QCOM_ICC_BWMON=y
# end of Qualcomm SoC drivers
CONFIG_SOC_RENESAS=y
CONFIG_RST_RCAR=y
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_RCAR_GEN4=y
CONFIG_SYSC_R8A77995=y
CONFIG_SYSC_R8A7794=y
CONFIG_SYSC_R8A77990=y
CONFIG_SYSC_R8A7779=y
CONFIG_SYSC_R8A7790=y
CONFIG_SYSC_R8A7795=y
CONFIG_SYSC_R8A7791=y
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77960=y
CONFIG_SYSC_R8A77961=y
CONFIG_SYSC_R8A779F0=y
CONFIG_SYSC_R8A7792=y
CONFIG_SYSC_R8A77980=y
CONFIG_SYSC_R8A77970=y
CONFIG_SYSC_R8A779A0=y
CONFIG_SYSC_R8A779G0=y
CONFIG_SYSC_RMOBILE=y
CONFIG_SYSC_R8A77470=y
CONFIG_SYSC_R8A7745=y
CONFIG_SYSC_R8A7742=y
CONFIG_SYSC_R8A7743=y
CONFIG_SYSC_R8A774C0=y
CONFIG_SYSC_R8A774E1=y
CONFIG_SYSC_R8A774A1=y
CONFIG_SYSC_R8A774B1=y
CONFIG_ROCKCHIP_GRF=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ROCKCHIP_DTPM=m
CONFIG_SOC_SAMSUNG=y
CONFIG_EXYNOS_ASV_ARM=y
CONFIG_EXYNOS_CHIPID=y
CONFIG_EXYNOS_USI=y
CONFIG_EXYNOS_PM_DOMAINS=y
CONFIG_EXYNOS_REGULATOR_COUPLER=y
CONFIG_SUNXI_SRAM=y
CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y
CONFIG_SOC_TI=y
CONFIG_UX500_SOC_ID=y
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
CONFIG_ARM_IMX_BUS_DEVFREQ=y
CONFIG_ARM_TEGRA_DEVFREQ=y
CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=y
CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ=y
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_FSA9480=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_INTEL_INT3496=y
CONFIG_EXTCON_INTEL_CHT_WC=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX77843=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=y
CONFIG_DDR=y
CONFIG_ATMEL_SDRAMC=y
CONFIG_ATMEL_EBI=y
CONFIG_BRCMSTB_DPFE=y
CONFIG_BRCMSTB_MEMC=y
CONFIG_BT1_L2_CTL=y
CONFIG_TI_AEMIF=y
CONFIG_TI_EMIF=y
CONFIG_OMAP_GPMC=y
CONFIG_OMAP_GPMC_DEBUG=y
CONFIG_FPGA_DFL_EMIF=y
CONFIG_MVEBU_DEVBUS=y
CONFIG_FSL_CORENET_CF=y
CONFIG_FSL_IFC=y
CONFIG_JZ4780_NEMC=y
CONFIG_MTK_SMI=y
CONFIG_DA8XX_DDRCTL=y
CONFIG_RENESAS_RPCIF=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_SAMSUNG_MC=y
CONFIG_EXYNOS5422_DMC=y
CONFIG_EXYNOS_SROM=y
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
CONFIG_TEGRA210_EMC_TABLE=y
CONFIG_TEGRA210_EMC=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#
CONFIG_ADIS16201=y
CONFIG_ADIS16209=y
CONFIG_ADXL313=y
CONFIG_ADXL313_I2C=y
CONFIG_ADXL313_SPI=y
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=y
CONFIG_ADXL355_SPI=y
CONFIG_ADXL367=y
CONFIG_ADXL367_SPI=y
CONFIG_ADXL367_I2C=y
CONFIG_ADXL372=y
CONFIG_ADXL372_SPI=y
CONFIG_ADXL372_I2C=y
CONFIG_BMA220=y
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMA400_SPI=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
CONFIG_BMI088_ACCEL=y
CONFIG_BMI088_ACCEL_SPI=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_FXLS8962AF=y
CONFIG_FXLS8962AF_I2C=y
CONFIG_FXLS8962AF_SPI=y
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=y
CONFIG_KXSD9=y
CONFIG_KXSD9_SPI=y
CONFIG_KXSD9_I2C=y
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7455_SPI=y
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
CONFIG_MSA311=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
CONFIG_SCA3000=y
CONFIG_SCA3300=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
CONFIG_AD7091R5=y
CONFIG_AD7124=y
CONFIG_AD7192=y
CONFIG_AD7266=y
CONFIG_AD7280=y
CONFIG_AD7291=y
CONFIG_AD7292=y
CONFIG_AD7298=y
CONFIG_AD7476=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD7606_IFACE_SPI=y
CONFIG_AD7766=y
CONFIG_AD7768_1=y
CONFIG_AD7780=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD7949=y
CONFIG_AD799X=y
CONFIG_AD9467=y
CONFIG_ADI_AXI_ADC=y
CONFIG_ASPEED_ADC=y
CONFIG_AT91_ADC=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AXP20X_ADC=y
CONFIG_AXP288_ADC=y
CONFIG_BCM_IPROC_ADC=y
CONFIG_BERLIN2_ADC=y
CONFIG_CC10001_ADC=y
CONFIG_CPCAP_ADC=y
CONFIG_DA9150_GPADC=y
CONFIG_DLN2_ADC=y
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_EXYNOS_ADC=y
CONFIG_MXS_LRADC_ADC=y
CONFIG_FSL_MX25_ADC=y
CONFIG_HI8435=y
CONFIG_HX711=y
CONFIG_INGENIC_ADC=y
CONFIG_IMX7D_ADC=y
CONFIG_IMX8QXP_ADC=y
CONFIG_LP8788_ADC=y
CONFIG_LPC18XX_ADC=y
CONFIG_LPC32XX_ADC=y
CONFIG_LTC2471=y
CONFIG_LTC2485=y
CONFIG_LTC2496=y
CONFIG_LTC2497=y
CONFIG_MAX1027=y
CONFIG_MAX11100=y
CONFIG_MAX1118=y
CONFIG_MAX11205=y
CONFIG_MAX1241=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP320X=y
CONFIG_MCP3422=y
CONFIG_MCP3911=y
CONFIG_MEDIATEK_MT6360_ADC=y
CONFIG_MEDIATEK_MT6577_AUXADC=y
CONFIG_MEN_Z188_ADC=y
CONFIG_MESON_SARADC=y
CONFIG_MP2629_ADC=y
CONFIG_NAU7802=y
CONFIG_NPCM_ADC=y
CONFIG_PALMAS_GPADC=y
CONFIG_QCOM_VADC_COMMON=y
CONFIG_QCOM_PM8XXX_XOADC=y
CONFIG_QCOM_SPMI_RRADC=y
CONFIG_QCOM_SPMI_IADC=y
CONFIG_QCOM_SPMI_VADC=y
CONFIG_QCOM_SPMI_ADC5=y
CONFIG_RCAR_GYRO_ADC=y
CONFIG_RN5T618_ADC=y
CONFIG_ROCKCHIP_SARADC=y
CONFIG_RICHTEK_RTQ6056=y
CONFIG_RZG2L_ADC=y
CONFIG_SC27XX_ADC=y
CONFIG_SPEAR_ADC=y
CONFIG_SD_ADC_MODULATOR=y
CONFIG_STM32_ADC_CORE=y
CONFIG_STM32_ADC=y
CONFIG_STM32_DFSDM_CORE=y
CONFIG_STM32_DFSDM_ADC=y
CONFIG_STMPE_ADC=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC084S021=y
CONFIG_TI_ADC12138=y
CONFIG_TI_ADC108S102=y
CONFIG_TI_ADC128S052=y
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS1015=y
CONFIG_TI_ADS7950=y
CONFIG_TI_ADS8344=y
CONFIG_TI_ADS8688=y
CONFIG_TI_ADS124S08=y
CONFIG_TI_ADS131E08=y
CONFIG_TI_AM335X_ADC=y
CONFIG_TI_TLC4541=y
CONFIG_TI_TSC2046=y
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y
CONFIG_VIPERBOARD_ADC=y
CONFIG_XILINX_XADC=y
CONFIG_XILINX_AMS=y
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
CONFIG_AD74413R=y
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_AD8366=y
CONFIG_ADA4250=y
CONFIG_HMC425=y
# end of Amplifiers
#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7746=y
# end of Capacitance to digital converters
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_BME680_SPI=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
CONFIG_SCD30_CORE=y
CONFIG_SCD30_I2C=y
CONFIG_SCD30_SERIAL=y
CONFIG_SCD4X=y
CONFIG_SENSIRION_SGP30=y
CONFIG_SENSIRION_SGP40=y
CONFIG_SPS30=y
CONFIG_SPS30_I2C=y
CONFIG_SPS30_SERIAL=y
CONFIG_SENSEAIR_SUNRISE_CO2=y
CONFIG_VZ89X=y
# end of Chemical Sensors
CONFIG_IIO_CROS_EC_SENSORS_CORE=y
CONFIG_IIO_CROS_EC_SENSORS=y
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=y
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# IIO SCMI Sensors
#
CONFIG_IIO_SCMI=y
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD3552R=y
CONFIG_AD5064=y
CONFIG_AD5360=y
CONFIG_AD5380=y
CONFIG_AD5421=y
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
CONFIG_LTC2688=y
CONFIG_AD5686=y
CONFIG_AD5686_SPI=y
CONFIG_AD5696_I2C=y
CONFIG_AD5755=y
CONFIG_AD5758=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5766=y
CONFIG_AD5770R=y
CONFIG_AD5791=y
CONFIG_AD7293=y
CONFIG_AD7303=y
CONFIG_AD8801=y
CONFIG_DPOT_DAC=y
CONFIG_DS4424=y
CONFIG_LPC18XX_DAC=y
CONFIG_LTC1660=y
CONFIG_LTC2632=y
CONFIG_M62332=y
CONFIG_MAX517=y
CONFIG_MAX5821=y
CONFIG_MCP4725=y
CONFIG_MCP4922=y
CONFIG_STM32_DAC=y
CONFIG_STM32_DAC_CORE=y
CONFIG_TI_DAC082S085=y
CONFIG_TI_DAC5571=y
CONFIG_TI_DAC7311=y
CONFIG_TI_DAC7612=y
CONFIG_VF610_DAC=y
# end of Digital to analog converters
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# end of IIO dummy driver
#
# Filters
#
CONFIG_ADMV8818=y
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
CONFIG_ADF4371=y
CONFIG_ADMV1013=y
CONFIG_ADMV1014=y
CONFIG_ADMV4420=y
CONFIG_ADRF6780=y
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
CONFIG_ADXRS290=y
CONFIG_ADXRS450=y
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_BMG160_SPI=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_FXAS21002C_SPI=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
CONFIG_HDC2010=y
CONFIG_HID_SENSOR_HUMIDITY=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTS221_SPI=y
CONFIG_HTU21=y
CONFIG_SI7005=y
CONFIG_SI7020=y
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16460=y
CONFIG_ADIS16475=y
CONFIG_ADIS16480=y
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BMI160_SPI=y
CONFIG_BOSCH_BNO055=y
CONFIG_BOSCH_BNO055_SERIAL=y
CONFIG_BOSCH_BNO055_I2C=y
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
CONFIG_FXOS8700_SPI=y
CONFIG_KMX61=y
CONFIG_INV_ICM42600=y
CONFIG_INV_ICM42600_I2C=y
CONFIG_INV_ICM42600_SPI=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_SPI=y
CONFIG_IIO_ST_LSM6DSX_I3C=y
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=y
CONFIG_ADJD_S311=y
CONFIG_ADUX1020=y
CONFIG_AL3010=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_IIO_CROS_EC_LIGHT_PROX=y
CONFIG_GP2AP002=y
CONFIG_GP2AP020A00F=y
CONFIG_IQS621_ALS=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
CONFIG_HID_SENSOR_ALS=y
CONFIG_HID_SENSOR_PROX=y
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
CONFIG_LTR501=y
CONFIG_LTRF216A=y
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
CONFIG_MAX44009=y
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
CONFIG_SI1133=y
CONFIG_SI1145=y
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
CONFIG_ST_UVIS25_SPI=y
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2591=y
CONFIG_TSL2772=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VCNL4035=y
CONFIG_VEML6030=y
CONFIG_VEML6070=y
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_BMC150_MAGN_SPI=y
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_SENSORS_RM3100_SPI=y
CONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors
#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=y
CONFIG_HID_SENSOR_DEVICE_ROTATION=y
# end of Inclinometer sensors
CONFIG_IIO_RESCALE_KUNIT_TEST=y
CONFIG_IIO_FORMAT_KUNIT_TEST=y
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
CONFIG_IIO_STM32_TIMER_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone
#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=y
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=y
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=y
CONFIG_AD5272=y
CONFIG_DS1803=y
CONFIG_MAX5432=y
CONFIG_MAX5481=y
CONFIG_MAX5487=y
CONFIG_MCP4018=y
CONFIG_MCP4131=y
CONFIG_MCP4531=y
CONFIG_MCP41010=y
CONFIG_TPL0102=y
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_ABP060MG=y
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_BMP280_SPI=y
CONFIG_IIO_CROS_EC_BARO=y
CONFIG_DLHL60D=y
CONFIG_DPS310=y
CONFIG_HID_SENSOR_PRESS=y
CONFIG_HP03=y
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5611_SPI=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
# end of Pressure sensors
#
# Lightning sensors
#
CONFIG_AS3935=y
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=y
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
CONFIG_PING=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
CONFIG_SX9324=y
CONFIG_SX9360=y
CONFIG_SX9500=y
CONFIG_SRF08=y
CONFIG_VCNL3020=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=y
CONFIG_LTC2983=y
CONFIG_MAXIM_THERMOCOUPLE=y
CONFIG_HID_SENSOR_TEMP=y
CONFIG_MLX90614=y
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
CONFIG_TMP117=y
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
CONFIG_MAX31856=y
CONFIG_MAX31865=y
# end of Temperature sensors
CONFIG_NTB=y
CONFIG_NTB_MSI=y
CONFIG_NTB_IDT=y
CONFIG_NTB_EPF=m
CONFIG_NTB_SWITCHTEC=y
CONFIG_NTB_PINGPONG=y
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=y
CONFIG_NTB_MSI_TEST=y
CONFIG_NTB_TRANSPORT=y
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_ATMEL=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
CONFIG_PWM_BCM_IPROC=y
CONFIG_PWM_BCM_KONA=y
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BERLIN=y
CONFIG_PWM_BRCMSTB=y
CONFIG_PWM_CLK=y
CONFIG_PWM_CLPS711X=y
CONFIG_PWM_CROS_EC=y
CONFIG_PWM_DWC=y
CONFIG_PWM_EP93XX=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_HIBVT=y
CONFIG_PWM_IMG=y
CONFIG_PWM_IMX1=y
CONFIG_PWM_IMX27=y
CONFIG_PWM_IMX_TPM=y
CONFIG_PWM_INTEL_LGM=y
CONFIG_PWM_IQS620A=y
CONFIG_PWM_JZ4740=y
CONFIG_PWM_KEEMBAY=y
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPC18XX_SCT=y
CONFIG_PWM_LPC32XX=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=y
CONFIG_PWM_MESON=y
CONFIG_PWM_MTK_DISP=y
CONFIG_PWM_MEDIATEK=y
CONFIG_PWM_MXS=y
CONFIG_PWM_NTXEC=y
CONFIG_PWM_OMAP_DMTIMER=y
CONFIG_PWM_PCA9685=y
CONFIG_PWM_PXA=y
CONFIG_PWM_RASPBERRYPI_POE=y
CONFIG_PWM_RCAR=y
CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_SIFIVE=y
CONFIG_PWM_SL28CPLD=y
CONFIG_PWM_SPEAR=y
CONFIG_PWM_SPRD=y
CONFIG_PWM_STI=y
CONFIG_PWM_STM32=y
CONFIG_PWM_STM32_LP=y
CONFIG_PWM_STMPE=y
CONFIG_PWM_SUN4I=y
CONFIG_PWM_SUNPLUS=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_TIECAP=y
CONFIG_PWM_TIEHRPWM=y
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
CONFIG_PWM_VISCONTI=y
CONFIG_PWM_VT8500=y
CONFIG_PWM_XILINX=y
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_MADERA_IRQ=y
CONFIG_JCORE_AIC=y
CONFIG_RENESAS_INTC_IRQPIN=y
CONFIG_RENESAS_IRQC=y
CONFIG_RENESAS_RZA1_IRQC=y
CONFIG_RENESAS_RZG2L_IRQC=y
CONFIG_SL28CPLD_INTC=y
CONFIG_TS4800_IRQ=y
CONFIG_XILINX_INTC=y
CONFIG_INGENIC_TCU_IRQ=y
CONFIG_IRQ_UNIPHIER_AIDET=y
CONFIG_MESON_IRQ_GPIO=y
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
CONFIG_IMX_MU_MSI=y
CONFIG_EXYNOS_IRQ_COMBINER=y
CONFIG_MST_IRQ=y
CONFIG_MCHP_EIC=y
CONFIG_SUNPLUS_SP7021_INTC=y
# end of IRQ chip support
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_A10SR=y
CONFIG_RESET_ATH79=y
CONFIG_RESET_AXS10X=y
CONFIG_RESET_BCM6345=y
CONFIG_RESET_BERLIN=y
CONFIG_RESET_BRCMSTB=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_HSDK=y
CONFIG_RESET_IMX7=y
CONFIG_RESET_INTEL_GW=y
CONFIG_RESET_K210=y
CONFIG_RESET_LANTIQ=y
CONFIG_RESET_LPC18XX=y
CONFIG_RESET_MCHP_SPARX5=y
CONFIG_RESET_MESON=y
CONFIG_RESET_MESON_AUDIO_ARB=y
CONFIG_RESET_NPCM=y
CONFIG_RESET_PISTACHIO=y
CONFIG_RESET_POLARFIRE_SOC=y
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_QCOM_PDC=y
CONFIG_RESET_RASPBERRYPI=y
CONFIG_RESET_RZG2L_USBPHY_CTRL=y
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SOCFPGA=y
CONFIG_RESET_STARFIVE_JH7100=y
CONFIG_RESET_SUNPLUS=y
CONFIG_RESET_SUNXI=y
CONFIG_RESET_TI_SCI=y
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
CONFIG_RESET_TN48M_CPLD=y
CONFIG_RESET_UNIPHIER=y
CONFIG_RESET_UNIPHIER_GLUE=y
CONFIG_RESET_ZYNQ=y
CONFIG_COMMON_RESET_HI3660=y
CONFIG_COMMON_RESET_HI6220=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_PHY_PISTACHIO_USB=y
CONFIG_PHY_XGENE=y
CONFIG_USB_LGM_PHY=y
CONFIG_PHY_CAN_TRANSCEIVER=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN6I_MIPI_DPHY=y
CONFIG_PHY_SUN9I_USB=y
CONFIG_PHY_SUN50I_USB3=y
CONFIG_PHY_MESON8_HDMI_TX=y
CONFIG_PHY_MESON8B_USB2=y
CONFIG_PHY_MESON_GXL_USB2=y
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=y
CONFIG_PHY_MESON_G12A_USB2=y
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
CONFIG_PHY_MESON_AXG_PCIE=y
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y
#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
CONFIG_PHY_CYGNUS_PCIE=y
CONFIG_PHY_BCM_SR_USB=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_BCM_NS_USB2=y
CONFIG_PHY_BCM_NS_USB3=y
CONFIG_PHY_NS2_PCIE=y
CONFIG_PHY_NS2_USB_DRD=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_PHY_BRCM_USB=y
CONFIG_PHY_BCM_SR_PCIE=y
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_LVDS_PHY=y
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_FSL_IMX8M_PCIE=y
CONFIG_PHY_FSL_LYNX_28G=y
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HI3660_USB=y
CONFIG_PHY_HI3670_USB=y
CONFIG_PHY_HI3670_PCIE=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_INGENIC_USB=y
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_ARMADA375_USBCLUSTER_PHY=y
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_MVEBU_A3700_UTMI=y
CONFIG_PHY_MVEBU_A38X_COMPHY=y
CONFIG_PHY_MVEBU_CP110_UTMI=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_PHY_PXA_USB=y
CONFIG_PHY_MMP3_USB=y
CONFIG_PHY_MMP3_HSIC=y
CONFIG_PHY_MTK_PCIE=y
CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_MTK_UFS=y
CONFIG_PHY_MTK_XSPHY=y
CONFIG_PHY_MTK_HDMI=y
CONFIG_PHY_MTK_MIPI_DSI=y
CONFIG_PHY_MTK_DP=y
CONFIG_PHY_SPARX5_SERDES=y
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_CPCAP_USB=y
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_ATH79_USB=y
CONFIG_PHY_QCOM_EDP=y
CONFIG_PHY_QCOM_IPQ4019_USB=y
CONFIG_PHY_QCOM_PCIE2=y
CONFIG_PHY_QCOM_QMP=y
CONFIG_PHY_QCOM_QUSB2=y
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_QCOM_USB_HS_28NM=y
CONFIG_PHY_QCOM_USB_SS=y
CONFIG_PHY_QCOM_IPQ806X_USB=y
CONFIG_PHY_MT7621_PCI=y
CONFIG_PHY_RALINK_USB=y
CONFIG_PHY_RCAR_GEN3_USB3=y
CONFIG_PHY_ROCKCHIP_DPHY_RX0=y
CONFIG_PHY_ROCKCHIP_INNO_HDMI=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=y
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
CONFIG_PHY_ROCKCHIP_PCIE=y
CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
CONFIG_PHY_ROCKCHIP_TYPEC=y
CONFIG_PHY_EXYNOS_DP_VIDEO=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
CONFIG_PHY_EXYNOS_PCIE=y
CONFIG_PHY_SAMSUNG_UFS=y
CONFIG_PHY_SAMSUNG_USB2=y
CONFIG_PHY_S5PV210_USB2=y
CONFIG_PHY_EXYNOS5_USBDRD=y
CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_PHY_UNIPHIER_USB3=y
CONFIG_PHY_UNIPHIER_PCIE=y
CONFIG_PHY_UNIPHIER_AHCI=y
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PHY_SUNPLUS_USB=y
CONFIG_PHY_TEGRA194_P2U=y
CONFIG_PHY_DA8XX_USB=y
CONFIG_PHY_DM816X_USB=y
CONFIG_PHY_AM654_SERDES=y
CONFIG_PHY_J721E_WIZ=y
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_TI_PIPE3=y
CONFIG_PHY_TUSB1210=y
CONFIG_PHY_TI_GMII_SEL=y
CONFIG_PHY_INTEL_KEEMBAY_EMMC=y
CONFIG_PHY_INTEL_KEEMBAY_USB=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=y
CONFIG_PHY_INTEL_THUNDERBAY_EMMC=y
CONFIG_PHY_XILINX_ZYNQMP=y
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_DTPM=y
CONFIG_DTPM_CPU=y
CONFIG_DTPM_DEVFREQ=y
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=y
CONFIG_RAS=y
CONFIG_USB4=y
CONFIG_USB4_DEBUGFS_WRITE=y
CONFIG_USB4_DEBUGFS_MARGINING=y
CONFIG_USB4_KUNIT_TEST=y
CONFIG_USB4_DMA_TEST=y
#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
CONFIG_ANDROID_BINDER_IPC_SELFTEST=y
# end of Android
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=y
CONFIG_BTT=y
CONFIG_OF_PMEM=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_APPLE_EFUSES=y
CONFIG_NVMEM_BCM_OCOTP=y
CONFIG_NVMEM_BRCM_NVRAM=y
CONFIG_NVMEM_IMX_IIM=y
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_NVMEM_JZ4780_EFUSE=y
CONFIG_NVMEM_LAN9662_OTPC=y
CONFIG_NVMEM_LAYERSCAPE_SFP=y
CONFIG_NVMEM_LPC18XX_EEPROM=y
CONFIG_NVMEM_LPC18XX_OTP=y
CONFIG_NVMEM_MESON_MX_EFUSE=y
CONFIG_NVMEM_MICROCHIP_OTPC=y
CONFIG_NVMEM_MTK_EFUSE=y
CONFIG_NVMEM_MXS_OCOTP=y
CONFIG_NVMEM_NINTENDO_OTP=y
CONFIG_NVMEM_QCOM_QFPROM=y
CONFIG_NVMEM_RAVE_SP_EEPROM=y
CONFIG_NVMEM_RMEM=y
CONFIG_NVMEM_ROCKCHIP_EFUSE=y
CONFIG_NVMEM_ROCKCHIP_OTP=y
CONFIG_NVMEM_SC27XX_EFUSE=y
CONFIG_NVMEM_SNVS_LPGPR=y
CONFIG_NVMEM_SPMI_SDAM=y
CONFIG_NVMEM_SPRD_EFUSE=y
CONFIG_NVMEM_STM32_ROMEM=y
CONFIG_NVMEM_SUNPLUS_OCOTP=y
CONFIG_NVMEM_U_BOOT_ENV=y
CONFIG_NVMEM_UNIPHIER_EFUSE=y
CONFIG_NVMEM_VF610_OCOTP=y
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
CONFIG_INTEL_TH_ACPI=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support
CONFIG_FPGA=y
CONFIG_FPGA_MGR_SOCFPGA=y
CONFIG_FPGA_MGR_SOCFPGA_A10=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_ALTERA_PR_IP_CORE_PLAT=y
CONFIG_FPGA_MGR_ALTERA_PS_SPI=y
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_MGR_ZYNQ_FPGA=y
CONFIG_FPGA_MGR_XILINX_SPI=y
CONFIG_FPGA_MGR_ICE40_SPI=y
CONFIG_FPGA_MGR_MACHXO2_SPI=y
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
CONFIG_OF_FPGA_REGION=y
CONFIG_FPGA_DFL=y
CONFIG_FPGA_DFL_AFU=y
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=y
CONFIG_FPGA_DFL_PCI=y
CONFIG_FPGA_MGR_ZYNQMP_FPGA=y
CONFIG_FPGA_MGR_VERSAL_FPGA=y
CONFIG_FPGA_M10_BMC_SEC_UPDATE=y
CONFIG_FPGA_MGR_MICROCHIP_SPI=y
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_AST_CF=y
CONFIG_FSI_MASTER_ASPEED=y
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
CONFIG_TEE=y
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_ADGS1408=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_SLIM_QCOM_NGD_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=y
CONFIG_INTERCONNECT_IMX8MM=y
CONFIG_INTERCONNECT_IMX8MN=y
CONFIG_INTERCONNECT_IMX8MQ=y
CONFIG_INTERCONNECT_IMX8MP=y
CONFIG_INTERCONNECT_QCOM_OSM_L3=y
CONFIG_INTERCONNECT_SAMSUNG=y
CONFIG_INTERCONNECT_EXYNOS=y
CONFIG_COUNTER=y
CONFIG_104_QUAD_8=y
CONFIG_INTERRUPT_CNT=y
CONFIG_STM32_TIMER_CNT=y
CONFIG_STM32_LPTIMER_CNT=y
CONFIG_TI_EQEP=y
CONFIG_FTM_QUADDEC=y
CONFIG_MICROCHIP_TCB_CAPTURE=y
CONFIG_INTEL_QEP=y
CONFIG_TI_ECAP_CAPTURE=y
CONFIG_MOST=y
CONFIG_MOST_USB_HDM=y
CONFIG_MOST_CDEV=y
CONFIG_MOST_SND=y
CONFIG_PECI=y
CONFIG_PECI_CPU=y
CONFIG_PECI_ASPEED=y
CONFIG_HTE=y
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
CONFIG_F2FS_UNFAIR_RWSEM=y
CONFIG_ZONEFS_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_DEBUG=y
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VIRTIO_FS=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
CONFIG_OVERLAY_FS_METACOPY=y
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_ERROR_INJECTION=y
CONFIG_CACHEFILES_ONDEMAND=y
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=y
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
CONFIG_NTFS3_FS=y
CONFIG_NTFS3_64BIT_CLUSTER=y
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_UBIFS_FS_AUTHENTICATION=y
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_CRAMFS_MTD=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_RAM=y
CONFIG_PSTORE_ZONE=y
CONFIG_PSTORE_BLK=y
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_PSTORE_BLK_PMSG_SIZE=64
CONFIG_PSTORE_BLK_CONSOLE_SIZE=64
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EROFS_FS=y
CONFIG_EROFS_FS_DEBUG=y
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
CONFIG_EROFS_FS_ZIP=y
CONFIG_EROFS_FS_ZIP_LZMA=y
CONFIG_EROFS_FS_ONDEMAND=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=y
CONFIG_PNFS_FLEXFILE_LAYOUT=y
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFS_V4_2_READ_PLUS=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_2_INTER_SSC=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DEBUG_DUMP_KEYS=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
CONFIG_CIFS_SMB_DIRECT=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ROOT=y
CONFIG_SMB_SERVER=y
CONFIG_SMB_SERVER_SMBDIRECT=y
CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN=y
CONFIG_SMB_SERVER_KERBEROS5=y
CONFIG_SMBFS_COMMON=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
CONFIG_AFS_DEBUG_CURSOR=y
CONFIG_9P_FS=y
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEPRECATED_API=y
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_TRUSTED_KEYS_TEE=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_INFINIBAND=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_SMACK_BRINGUP=y
CONFIG_SECURITY_SMACK_NETFILTER=y
CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_DEBUG=y
CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y
CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
CONFIG_SECURITY_APPARMOR_KUNIT_TEST=y
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENFORCE=y
CONFIG_SECURITY_LOADPIN_VERITY=y
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_LOAD_UEFI_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
# CONFIG_IMA_DEFAULT_HASH_SM3 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_ARCH_POLICY=y
CONFIG_IMA_APPRAISE_BUILD_POLICY=y
CONFIG_IMA_APPRAISE_REQUIRE_FIRMWARE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_MODULE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_POLICY_SIGS=y
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_APPRAISE_MODSIG=y
CONFIG_IMA_TRUSTED_KEYRING=y
CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY=y
CONFIG_IMA_BLACKLIST_KEYRING=y
CONFIG_IMA_LOAD_X509=y
CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
CONFIG_IMA_APPRAISE_SIGNED_INIT=y
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_DISABLE_HTABLE=y
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_EVM_EXTRA_SMACK_XATTRS=y
CONFIG_EVM_ADD_XATTRS=y
CONFIG_EVM_LOAD_X509=y
CONFIG_EVM_X509_PATH="/etc/keys/x509_evm.der"
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
CONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_STATS=y
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_SUN8I_CE=y
CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG=y
CONFIG_CRYPTO_DEV_SUN8I_CE_HASH=y
CONFIG_CRYPTO_DEV_SUN8I_CE_PRNG=y
CONFIG_CRYPTO_DEV_SUN8I_CE_TRNG=y
CONFIG_CRYPTO_DEV_SUN8I_SS=y
CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG=y
CONFIG_CRYPTO_DEV_SUN8I_SS_PRNG=y
CONFIG_CRYPTO_DEV_SUN8I_SS_HASH=y
CONFIG_CRYPTO_DEV_SL3516=y
CONFIG_CRYPTO_DEV_SL3516_DEBUG=y
CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
CONFIG_CRYPTO_DEV_S5P=y
CONFIG_CRYPTO_DEV_ATMEL_AUTHENC=y
CONFIG_CRYPTO_DEV_ATMEL_AES=y
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
CONFIG_CRYPTO_DEV_QAT_C62X=y
CONFIG_CRYPTO_DEV_QAT_4XXX=y
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=y
CONFIG_CRYPTO_DEV_QAT_C62XVF=y
CONFIG_CRYPTO_DEV_CPT=y
CONFIG_CAVIUM_CPT=y
CONFIG_CRYPTO_DEV_NITROX=y
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=y
CONFIG_CRYPTO_DEV_MARVELL=y
CONFIG_CRYPTO_DEV_OCTEONTX_CPT=y
CONFIG_CRYPTO_DEV_OCTEONTX2_CPT=y
CONFIG_CRYPTO_DEV_CAVIUM_ZIP=y
CONFIG_CRYPTO_DEV_QCE=y
CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
CONFIG_CRYPTO_DEV_QCE_SHA=y
CONFIG_CRYPTO_DEV_QCE_AEAD=y
CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
CONFIG_CRYPTO_DEV_QCOM_RNG=y
CONFIG_CRYPTO_DEV_IMGTEC_HASH=y
CONFIG_CRYPTO_DEV_ZYNQMP_AES=y
CONFIG_CRYPTO_DEV_ZYNQMP_SHA3=y
CONFIG_CRYPTO_DEV_CHELSIO=y
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_SAFEXCEL=y
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_HISI_SEC=y
CONFIG_CRYPTO_DEV_HISI_SEC2=y
CONFIG_CRYPTO_DEV_HISI_QM=y
CONFIG_CRYPTO_DEV_HISI_ZIP=y
CONFIG_CRYPTO_DEV_HISI_HPRE=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_CRYPTO_DEV_SA2UL=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU_HMAC_SHA224=y
CONFIG_CRYPTO_DEV_ASPEED=y
CONFIG_CRYPTO_DEV_ASPEED_DEBUG=y
CONFIG_CRYPTO_DEV_ASPEED_HACE_HASH=y
CONFIG_CRYPTO_DEV_ASPEED_HACE_CRYPTO=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
CONFIG_FIPS_SIGNATURE_SELFTEST=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_ARCH_HAS_STRNCPY_FROM_USER=y
CONFIG_ARCH_HAS_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_STMP_DEVICE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_DMA_MARK_CLEAN=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_RESTRICTED_POOL=y
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_FORCE_NR_CPUS=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_6x10=y
CONFIG_FONT_10x18=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_TER16x32=y
CONFIG_FONT_6x8=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
CONFIG_MEMREGION=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=y
CONFIG_OBJAGG=y
# end of Library routines
CONFIG_PLDMFW=y
CONFIG_ASN1_ENCODER=y
CONFIG_POLYNOMIAL=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=y
CONFIG_UBSAN_UNREACHABLE=y
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
CONFIG_TEST_UBSAN=m
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
CONFIG_NET_NS_REFCNT_TRACKER=y
CONFIG_DEBUG_NET=y
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SHRINKER_DEBUG=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_MAPLE_TREE=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_WQ_WATCHDOG=y
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
CONFIG_CSD_LOCK_WAIT_DEBUG=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_KOBJECT_RELEASE=y
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACE_CLOCK=y
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set
#
# ia64 Debugging
#
CONFIG_IA64_GRANULE_16MB=y
CONFIG_IA64_PRINT_HAZARDS=y
CONFIG_DISABLE_VHPT=y
CONFIG_IA64_DEBUG_CMPXCHG=y
CONFIG_IA64_DEBUG_IRQ=y
# end of ia64 Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_KUNIT_DEFAULT_ENABLED=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAULT_INJECTION_USERCOPY=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAIL_SUNRPC=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_MIN_HEAP=y
CONFIG_TEST_SORT=y
CONFIG_TEST_DIV64=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_TEST_REF_TRACKER=y
CONFIG_RBTREE_TEST=y
CONFIG_REED_SOLOMON_TEST=y
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=y
CONFIG_TEST_HEXDUMP=y
CONFIG_STRING_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_SCANF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
CONFIG_TEST_XARRAY=y
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_SIPHASH=y
CONFIG_TEST_IDA=y
CONFIG_TEST_PARMAN=y
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_BLACKHOLE_DEV=m
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
CONFIG_TEST_SYSCTL=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
CONFIG_LINEAR_RANGES_TEST=y
CONFIG_CMDLINE_KUNIT_TEST=y
CONFIG_BITS_TEST=y
CONFIG_SLUB_KUNIT_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=y
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=y
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_TEST_UDELAY=y
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_DYNAMIC_DEBUG=y
CONFIG_TEST_KMOD=m
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_OBJAGG=y
CONFIG_TEST_MEMINIT=y
CONFIG_TEST_FREE_PAGES=y
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
CONFIG_WARN_MISSING_DOCUMENTS=y
CONFIG_WARN_ABI_ERRORS=y
# end of Kernel hacking
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 5:58 ` [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver Lei Rao
2022-12-06 6:19 ` Christoph Hellwig
2022-12-06 7:00 ` kernel test robot
@ 2022-12-06 9:01 ` kernel test robot
2 siblings, 0 replies; 71+ messages in thread
From: kernel test robot @ 2022-12-06 9:01 UTC (permalink / raw)
To: Lei Rao; +Cc: llvm, oe-kbuild-all
[-- Attachment #1: Type: text/plain, Size: 3172 bytes --]
Hi Lei,
[FYI, it's a private test report for your RFC patch.]
[auto build test WARNING on awilliam-vfio/for-linus]
[also build test WARNING on linus/master v6.1-rc8 next-20221206]
[cannot apply to awilliam-vfio/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Lei-Rao/Add-new-VFIO-PCI-driver-for-NVMe-devices/20221206-135959
base: https://github.com/awilliam/linux-vfio.git for-linus
patch link: https://lore.kernel.org/r/20221206055816.292304-2-lei.rao%40intel.com
patch subject: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
config: arm64-randconfig-r003-20221205
compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 6e4cea55f0d1104408b26ac574566a0e4de48036)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/intel-lab-lkp/linux/commit/d2d8886a23a91021f6ae8e6df99e9398376b9de2
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Lei-Rao/Add-new-VFIO-PCI-driver-for-NVMe-devices/20221206-135959
git checkout d2d8886a23a91021f6ae8e6df99e9398376b9de2
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/host/
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/nvme/host/pci.c:3584:5: warning: no previous prototype for function 'nvme_submit_vf_cmd' [-Wmissing-prototypes]
int nvme_submit_vf_cmd(struct pci_dev *dev, struct nvme_command *cmd,
^
drivers/nvme/host/pci.c:3584:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int nvme_submit_vf_cmd(struct pci_dev *dev, struct nvme_command *cmd,
^
static
1 warning generated.
vim +/nvme_submit_vf_cmd +3584 drivers/nvme/host/pci.c
3583
> 3584 int nvme_submit_vf_cmd(struct pci_dev *dev, struct nvme_command *cmd,
3585 size_t *result, void *buffer, unsigned int bufflen)
3586 {
3587 struct nvme_dev *ndev = NULL;
3588 union nvme_result res = { };
3589 int ret;
3590
3591 ndev = pci_iov_get_pf_drvdata(dev, &nvme_driver);
3592 if (IS_ERR(ndev))
3593 return PTR_ERR(ndev);
3594 ret = __nvme_submit_sync_cmd(ndev->ctrl.admin_q, cmd, &res, buffer, bufflen,
3595 NVME_QID_ANY, 0, 0);
3596 if (ret >= 0 && result)
3597 *result = le32_to_cpu(res.u32);
3598 return ret;
3599 }
3600 EXPORT_SYMBOL_GPL(nvme_submit_vf_cmd);
3601
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 201518 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 6.1.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 16.0.0 (git://gitmirror/llvm_project 6e4cea55f0d1104408b26ac574566a0e4de48036)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=160000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=160000
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=160000
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_IRQ_IPI=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_TIME_KUNIT_TEST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
CONFIG_CONTEXT_TRACKING_USER=y
CONFIG_CONTEXT_TRACKING_USER_FORCE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# end of BPF subsystem
CONFIG_PREEMPT_BUILD=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
# CONFIG_FORCE_TASKS_RCU is not set
CONFIG_TASKS_RCU=y
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_DELAY=500
# CONFIG_RCU_EXP_KTHREAD is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# CONFIG_RCU_NOCB_CPU_CB_BOOST is not set
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
# CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_TIME_NS is not set
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
CONFIG_IO_URING=y
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_ARM64=y
CONFIG_CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARM64_PAGE_SHIFT=14
CONFIG_ARM64_CONT_PTE_SHIFT=7
CONFIG_ARM64_CONT_PMD_SHIFT=5
CONFIG_ARCH_MMAP_RND_BITS_MIN=16
CONFIG_ARCH_MMAP_RND_BITS_MAX=30
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=9
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SMP=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
#
# Platform selection
#
CONFIG_ARCH_ACTIONS=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_ALPINE=y
# CONFIG_ARCH_APPLE is not set
# CONFIG_ARCH_BCM is not set
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_BITMAIN=y
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SPARX5 is not set
# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_LG1K is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEEMBAY is not set
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
# CONFIG_ARCH_NXP is not set
# CONFIG_ARCH_NPCM is not set
# CONFIG_ARCH_QCOM is not set
CONFIG_ARCH_REALTEK=y
CONFIG_ARCH_RENESAS=y
# CONFIG_ARCH_ROCKCHIP is not set
CONFIG_ARCH_SEATTLE=y
# CONFIG_ARCH_INTEL_SOCFPGA is not set
# CONFIG_ARCH_SYNQUACER is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_SPRD is not set
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_THUNDER2=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_ARCH_VEXPRESS=y
# CONFIG_ARCH_VISCONTI is not set
CONFIG_ARCH_XGENE=y
CONFIG_ARCH_ZYNQMP=y
# end of Platform selection
#
# Kernel Features
#
#
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
CONFIG_ARM64_ERRATUM_826319=y
# CONFIG_ARM64_ERRATUM_827319 is not set
CONFIG_ARM64_ERRATUM_824069=y
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_834220=y
# CONFIG_ARM64_ERRATUM_1742098 is not set
CONFIG_ARM64_ERRATUM_845719=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
CONFIG_ARM64_ERRATUM_1024718=y
CONFIG_ARM64_ERRATUM_1418040=y
# CONFIG_ARM64_ERRATUM_1165522 is not set
# CONFIG_ARM64_ERRATUM_1319367 is not set
# CONFIG_ARM64_ERRATUM_1530923 is not set
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
CONFIG_ARM64_ERRATUM_2441007=y
# CONFIG_ARM64_ERRATUM_1286807 is not set
# CONFIG_ARM64_ERRATUM_1463225 is not set
CONFIG_ARM64_ERRATUM_1542419=y
CONFIG_ARM64_ERRATUM_1508412=y
CONFIG_ARM64_ERRATUM_2051678=y
CONFIG_ARM64_ERRATUM_2077057=y
CONFIG_ARM64_ERRATUM_2658417=y
CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
CONFIG_ARM64_ERRATUM_2054223=y
CONFIG_ARM64_ERRATUM_2067961=y
CONFIG_ARM64_ERRATUM_2441009=y
# CONFIG_ARM64_ERRATUM_2457168 is not set
CONFIG_CAVIUM_ERRATUM_22375=y
# CONFIG_CAVIUM_ERRATUM_23144 is not set
CONFIG_CAVIUM_ERRATUM_23154=y
# CONFIG_CAVIUM_ERRATUM_27456 is not set
# CONFIG_CAVIUM_ERRATUM_30115 is not set
CONFIG_CAVIUM_TX2_ERRATUM_219=y
CONFIG_FUJITSU_ERRATUM_010001=y
CONFIG_HISILICON_ERRATUM_161600802=y
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
CONFIG_SOCIONEXT_SYNQUACER_PREITS=y
# end of ARM errata workarounds via the alternatives framework
# CONFIG_ARM64_4K_PAGES is not set
CONFIG_ARM64_16K_PAGES=y
# CONFIG_ARM64_64K_PAGES is not set
# CONFIG_ARM64_VA_BITS_36 is not set
CONFIG_ARM64_VA_BITS_47=y
# CONFIG_ARM64_VA_BITS_48 is not set
CONFIG_ARM64_VA_BITS=47
CONFIG_ARM64_PA_BITS_48=y
CONFIG_ARM64_PA_BITS=48
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_CLUSTER is not set
CONFIG_SCHED_SMT=y
CONFIG_NR_CPUS=256
CONFIG_HOTPLUG_CPU=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_TRANS_TABLE=y
CONFIG_XEN_DOM0=y
CONFIG_XEN=y
CONFIG_ARCH_FORCE_MAX_ORDER=12
# CONFIG_UNMAP_KERNEL_AT_EL0 is not set
# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
CONFIG_ARM64_SW_TTBR0_PAN=y
# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
CONFIG_COMPAT=y
CONFIG_KUSER_HELPERS=y
# CONFIG_COMPAT_ALIGNMENT_FIXUPS is not set
#
# ARMv8.1 architectural features
#
CONFIG_ARM64_HW_AFDBM=y
# CONFIG_ARM64_PAN is not set
CONFIG_AS_HAS_LDAPR=y
CONFIG_AS_HAS_LSE_ATOMICS=y
# end of ARMv8.1 architectural features
#
# ARMv8.2 architectural features
#
CONFIG_AS_HAS_ARMV8_2=y
CONFIG_AS_HAS_SHA3=y
# CONFIG_ARM64_PMEM is not set
# CONFIG_ARM64_RAS_EXTN is not set
# end of ARMv8.2 architectural features
#
# ARMv8.3 architectural features
#
CONFIG_ARM64_PTR_AUTH=y
CONFIG_ARM64_PTR_AUTH_KERNEL=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET=y
CONFIG_CC_HAS_SIGN_RETURN_ADDRESS=y
CONFIG_AS_HAS_PAC=y
CONFIG_AS_HAS_CFI_NEGATE_RA_STATE=y
# end of ARMv8.3 architectural features
#
# ARMv8.4 architectural features
#
CONFIG_ARM64_AMU_EXTN=y
CONFIG_AS_HAS_ARMV8_4=y
CONFIG_ARM64_TLB_RANGE=y
# end of ARMv8.4 architectural features
#
# ARMv8.5 architectural features
#
CONFIG_AS_HAS_ARMV8_5=y
CONFIG_ARM64_BTI=y
CONFIG_ARM64_BTI_KERNEL=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI=y
# CONFIG_ARM64_E0PD is not set
CONFIG_ARM64_AS_HAS_MTE=y
# end of ARMv8.5 architectural features
#
# ARMv8.7 architectural features
#
# end of ARMv8.7 architectural features
CONFIG_ARM64_SVE=y
CONFIG_ARM64_SME=y
CONFIG_ARM64_MODULE_PLTS=y
# CONFIG_ARM64_PSEUDO_NMI is not set
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
CONFIG_STACKPROTECTOR_PER_TASK=y
CONFIG_ARCH_NR_GPIO=0
# end of Kernel Features
#
# Boot options
#
CONFIG_CMDLINE=""
# end of Boot options
#
# Power management options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
# CONFIG_HIBERNATION_SNAPSHOT_DEV is not set
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# end of Power management options
#
# CPU Power Management
#
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_DT_IDLE_STATES=y
#
# ARM CPU Idle Drivers
#
CONFIG_ARM_PSCI_CPUIDLE=y
# CONFIG_ARM_PSCI_CPUIDLE_DOMAIN is not set
# CONFIG_ARM_CLPS711X_CPUIDLE is not set
# end of ARM CPU Idle Drivers
# end of CPU Idle
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y
CONFIG_ARM_ARMADA_37XX_CPUFREQ=m
# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
# CONFIG_ARM_BRCMSTB_AVS_CPUFREQ is not set
CONFIG_ARM_MEDIATEK_CPUFREQ=m
CONFIG_ARM_MEDIATEK_CPUFREQ_HW=m
# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
# CONFIG_ARM_SCMI_CPUFREQ is not set
# CONFIG_QORIQ_CPUFREQ is not set
# end of CPU Frequency scaling
# end of CPU Power Management
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_NVHE_EL2_DEBUG is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_SHADOW_CALL_STACK=y
# CONFIG_SHADOW_CALL_STACK is not set
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
# CONFIG_CFI_CLANG is not set
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=16
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=9
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_COMPILER_H=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_HAS_RELR=y
# CONFIG_RELR is not set
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_KEY=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAVE_TRACE_MMIO_ACCESS=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_ARCH_HAVE_ELF_PROT=y
CONFIG_ARCH_USE_GNU_PROPERTY=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=m
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lz4hc"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# end of SLAB allocator options
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
CONFIG_TLS=y
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_NV=y
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=m
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_TCP_CONG_DCTCP=y
CONFIG_TCP_CONG_CDG=m
# CONFIG_TCP_CONG_BBR is not set
# CONFIG_DEFAULT_VEGAS is not set
CONFIG_DEFAULT_VENO=y
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_DCTCP is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="veno"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=y
# CONFIG_TIPC_MEDIA_UDP is not set
# CONFIG_TIPC_CRYPTO is not set
# CONFIG_TIPC_DIAG is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
# CONFIG_BATMAN_ADV_BLA is not set
# CONFIG_BATMAN_ADV_DAT is not set
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_BATMAN_ADV_TRACING=y
CONFIG_OPENVSWITCH=m
# CONFIG_OPENVSWITCH_GRE is not set
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_NET_NSH=y
CONFIG_HSR=y
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
CONFIG_QRTR_MHI=m
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
# CONFIG_CAN_BCM is not set
# CONFIG_CAN_GW is not set
CONFIG_CAN_J1939=m
# CONFIG_CAN_ISOTP is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
CONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not set
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_XEN is not set
CONFIG_NET_9P_DEBUG=y
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set
CONFIG_PSAMPLE=y
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y
#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
CONFIG_PCIEASPM_PERFORMANCE=y
CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_QUIRKS is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_ECAM=y
CONFIG_PCI_BRIDGE_EMUL=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
# CONFIG_PCIE_BUS_DEFAULT is not set
CONFIG_PCIE_BUS_SAFE=y
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
CONFIG_PCI_AARDVARK=y
# CONFIG_PCIE_XILINX_NWL is not set
CONFIG_PCI_FTPCI100=y
# CONFIG_PCI_TEGRA is not set
CONFIG_PCIE_RCAR_HOST=y
# CONFIG_PCIE_RCAR_EP is not set
CONFIG_PCI_HOST_COMMON=y
# CONFIG_PCI_HOST_GENERIC is not set
CONFIG_PCIE_XILINX=y
CONFIG_PCIE_XILINX_CPM=y
# CONFIG_PCI_XGENE is not set
# CONFIG_PCI_V3_SEMI is not set
# CONFIG_PCI_VERSATILE is not set
# CONFIG_PCIE_ALTERA is not set
# CONFIG_PCI_HOST_THUNDER_PEM is not set
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
# CONFIG_PCIE_ROCKCHIP_HOST is not set
# CONFIG_PCIE_ROCKCHIP_EP is not set
CONFIG_PCIE_MEDIATEK=y
# CONFIG_PCIE_MEDIATEK_GEN3 is not set
# CONFIG_PCIE_BRCMSTB is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_APPLE is not set
# CONFIG_PCIE_MT7621 is not set
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
# CONFIG_PCIE_DW_PLAT_EP is not set
# CONFIG_PCI_EXYNOS is not set
CONFIG_PCI_IMX6=y
# CONFIG_PCIE_SPEAR13XX is not set
# CONFIG_PCI_KEYSTONE_HOST is not set
# CONFIG_PCI_KEYSTONE_EP is not set
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_LAYERSCAPE_EP=y
# CONFIG_PCI_HISI is not set
# CONFIG_PCIE_QCOM is not set
# CONFIG_PCIE_QCOM_EP is not set
# CONFIG_PCIE_ARMADA_8K is not set
# CONFIG_PCIE_ARTPEC6_HOST is not set
# CONFIG_PCIE_ARTPEC6_EP is not set
# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
# CONFIG_PCIE_INTEL_GW is not set
# CONFIG_PCIE_KEEMBAY_HOST is not set
# CONFIG_PCIE_KEEMBAY_EP is not set
CONFIG_PCIE_KIRIN=y
# CONFIG_PCIE_HISI_STB is not set
CONFIG_PCI_MESON=m
# CONFIG_PCIE_TEGRA194_HOST is not set
# CONFIG_PCIE_TEGRA194_EP is not set
# CONFIG_PCIE_VISCONTI_HOST is not set
# CONFIG_PCIE_UNIPHIER is not set
CONFIG_PCIE_UNIPHIER_EP=y
CONFIG_PCIE_AL=y
# CONFIG_PCIE_FU740 is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
CONFIG_PCIE_MOBIVEIL=y
CONFIG_PCIE_MOBIVEIL_HOST=y
# CONFIG_PCIE_MOBIVEIL_PLAT is not set
CONFIG_PCIE_LAYERSCAPE_GEN4=y
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
CONFIG_PCIE_CADENCE_PLAT=y
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
CONFIG_PCIE_CADENCE_PLAT_EP=y
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
# CONFIG_PCI_J721E_EP is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=y
# CONFIG_PCI_EPF_NTB is not set
# CONFIG_PCI_EPF_VNTB is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_GENERIC_ARCH_TOPOLOGY=y
CONFIG_GENERIC_ARCH_NUMA=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNXI_RSB=m
CONFIG_UNIPHIER_SYSTEM_BUS=y
# CONFIG_VEXPRESS_CONFIG is not set
CONFIG_FSL_MC_BUS=y
# CONFIG_FSL_MC_UAPI_SUPPORT is not set
CONFIG_MHI_BUS=m
CONFIG_MHI_BUS_DEBUG=y
# CONFIG_MHI_BUS_PCI_GENERIC is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
# CONFIG_CONNECTOR is not set
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=m
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
CONFIG_ARM_SCMI_TRANSPORT_SMC=y
# CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE is not set
# CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set
# CONFIG_ARM_SCMI_POWER_DOMAIN is not set
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_FW_CFG_SYSFS=m
CONFIG_FW_CFG_SYSFS_CMDLINE=y
CONFIG_TURRIS_MOX_RWTM=m
# CONFIG_ARM_FFA_TRANSPORT is not set
# CONFIG_BCM47XX_NVRAM is not set
# CONFIG_GOOGLE_FIRMWARE is not set
CONFIG_ARM_PSCI_FW=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
CONFIG_ARM_SMCCC_SOC_ID=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
#
# Zynq MPSoC Firmware Drivers
#
# CONFIG_ZYNQMP_FIRMWARE is not set
# end of Zynq MPSoC Firmware Drivers
# end of Firmware Drivers
CONFIG_GNSS=m
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_OF_NUMA=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
# CONFIG_NVME_TARGET_FCLOOP is not set
CONFIG_NVME_TARGET_TCP=m
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_PHANTOM=y
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=y
# CONFIG_QCOM_COINCELL is not set
# CONFIG_QCOM_FASTRPC is not set
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
CONFIG_PCI_ENDPOINT_TEST=y
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_EEPROM_EE1004=m
# end of EEPROM support
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=m
# CONFIG_GENWQE is not set
CONFIG_ECHO=m
# CONFIG_BCM_VK is not set
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=m
CONFIG_HABANA_AI=m
CONFIG_UACCE=m
# CONFIG_PVPANIC is not set
# CONFIG_GP_PCI1XXXX is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_HISI_SAS=m
# CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_MPI3MR is not set
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
CONFIG_XEN_SCSI_FRONTEND=m
# CONFIG_SCSI_SNIC is not set
CONFIG_SCSI_DMX3191D=m
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_WD719X=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support
CONFIG_ATA=m
CONFIG_SATA_HOST=y
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_ATA_FORCE is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_BRCM=m
# CONFIG_AHCI_DA850 is not set
# CONFIG_AHCI_DM816 is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_ST is not set
CONFIG_AHCI_IMX=m
CONFIG_AHCI_CEVA=m
# CONFIG_AHCI_MTK is not set
CONFIG_AHCI_MVEBU=m
CONFIG_AHCI_SUNXI=m
# CONFIG_AHCI_TEGRA is not set
CONFIG_AHCI_XGENE=m
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_FSL is not set
# CONFIG_SATA_GEMINI is not set
# CONFIG_SATA_AHCI_SEATTLE is not set
CONFIG_SATA_INIC162X=m
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=m
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
# CONFIG_TCM_PSCSI is not set
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_NETDEVICES is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not set
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADC is not set
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=m
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
# CONFIG_INPUT_88PM80X_ONKEY is not set
CONFIG_INPUT_AD714X=m
# CONFIG_INPUT_AD714X_I2C is not set
CONFIG_INPUT_ATMEL_CAPTOUCH=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=m
# CONFIG_INPUT_MAX8925_ONKEY is not set
# CONFIG_INPUT_MC13783_PWRBUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
# CONFIG_INPUT_TWL4030_VIBRA is not set
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
CONFIG_INPUT_DA9063_ONKEY=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
# CONFIG_INPUT_IBM_PANEL is not set
CONFIG_INPUT_IQS269A=y
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
CONFIG_INPUT_DRV260X_HAPTICS=m
CONFIG_INPUT_DRV2665_HAPTICS=m
CONFIG_INPUT_DRV2667_HAPTICS=y
# CONFIG_INPUT_HISI_POWERKEY is not set
# CONFIG_INPUT_SC27XX_VIBRA is not set
# CONFIG_INPUT_RT5120_PWRKEY is not set
CONFIG_INPUT_STPMIC1_ONKEY=m
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=m
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_AMBAKMI=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_APBPS2=m
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=m
CONFIG_USERIO=m
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=m
CONFIG_SERIAL_AMBA_PL011=y
# CONFIG_SERIAL_AMBA_PL011_CONSOLE is not set
CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y
# CONFIG_SERIAL_ATMEL is not set
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set
# CONFIG_SERIAL_TEGRA_TCU is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=m
# CONFIG_SERIAL_IMX_EARLYCON is not set
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_HS_LPC32XX is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
CONFIG_SERIAL_SIFIVE=m
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_QE=y
CONFIG_SERIAL_SCCNXP=m
CONFIG_SERIAL_SC16IS7XX=y
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_MPS2_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=m
# CONFIG_SERIAL_ST_ASC is not set
CONFIG_SERIAL_SPRD=m
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_MVEBU_UART is not set
CONFIG_SERIAL_OWL=y
# CONFIG_SERIAL_OWL_CONSOLE is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_MILBEAUT_USIO is not set
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK_GT=y
# CONFIG_N_HDLC is not set
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_N_GSM=y
# CONFIG_NOZOMI is not set
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_HVC_DCC is not set
# CONFIG_RPMSG_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
# CONFIG_IPMI_IPMB is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_ATMEL=m
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_BCM2835=m
CONFIG_HW_RANDOM_IPROC_RNG200=m
CONFIG_HW_RANDOM_IXP4XX=m
CONFIG_HW_RANDOM_OMAP=m
CONFIG_HW_RANDOM_OMAP3_ROM=m
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_IMX_RNGC=m
CONFIG_HW_RANDOM_NOMADIK=m
# CONFIG_HW_RANDOM_XGENE is not set
CONFIG_HW_RANDOM_STM32=m
# CONFIG_HW_RANDOM_MESON is not set
# CONFIG_HW_RANDOM_CAVIUM is not set
CONFIG_HW_RANDOM_MTK=m
CONFIG_HW_RANDOM_EXYNOS=m
CONFIG_HW_RANDOM_NPCM=m
CONFIG_HW_RANDOM_KEYSTONE=m
# CONFIG_HW_RANDOM_CCTRNG is not set
CONFIG_HW_RANDOM_XIPHERA=m
CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=m
CONFIG_HW_RANDOM_CN10K=m
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
# CONFIG_CARDMAN_4040 is not set
CONFIG_SCR24X=m
# end of PCMCIA character devices
CONFIG_DEVMEM=y
CONFIG_DEVPORT=y
# CONFIG_TCG_TPM is not set
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
CONFIG_XILLYBUS_OF=m
CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
# CONFIG_I2C_DEMUX_PINCTRL is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_HIX5HD2 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
CONFIG_I2C_BCM2835=y
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
# CONFIG_I2C_BRCMSTB is not set
CONFIG_I2C_CADENCE=m
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_EMEV2=m
# CONFIG_I2C_EXYNOS5 is not set
CONFIG_I2C_GPIO=m
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=m
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
# CONFIG_I2C_KEMPLD is not set
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=m
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PNX is not set
CONFIG_I2C_PXA=m
CONFIG_I2C_PXA_SLAVE=y
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
CONFIG_I2C_RK3X=y
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_TEGRA_BPMP is not set
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_VERSATILE=y
# CONFIG_I2C_WMT is not set
# CONFIG_I2C_THUNDERX is not set
CONFIG_I2C_XILINX=y
CONFIG_I2C_XLP9XX=m
CONFIG_I2C_RCAR=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PCI1XXXX is not set
CONFIG_I2C_TAOS_EVM=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_XGENE_SLIMPRO=y
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_SLAVE_TESTUNIT=m
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
CONFIG_I3C=m
CONFIG_CDNS_I3C_MASTER=m
# CONFIG_DW_I3C_MASTER is not set
# CONFIG_SVC_I3C_MASTER is not set
# CONFIG_MIPI_I3C_HCI is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_AS3722=m
# CONFIG_PINCTRL_AT91PIO4 is not set
CONFIG_PINCTRL_BM1880=y
# CONFIG_PINCTRL_CY8C95X0 is not set
# CONFIG_PINCTRL_DA850_PUPD is not set
CONFIG_PINCTRL_DA9062=m
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_KEEMBAY is not set
# CONFIG_PINCTRL_LPC18XX is not set
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_PALMAS=y
# CONFIG_PINCTRL_PISTACHIO is not set
# CONFIG_PINCTRL_ROCKCHIP is not set
CONFIG_PINCTRL_SINGLE=m
CONFIG_PINCTRL_STMFX=m
CONFIG_PINCTRL_SX150X=y
# CONFIG_PINCTRL_THUNDERBAY is not set
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
# CONFIG_PINCTRL_S700 is not set
CONFIG_PINCTRL_S900=y
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
CONFIG_PINCTRL_BCM2835=y
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
# CONFIG_PINCTRL_LOCHNAGAR is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L92=y
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX8MM=y
CONFIG_PINCTRL_IMX8MN=y
CONFIG_PINCTRL_IMX8MP=y
CONFIG_PINCTRL_IMX8MQ=y
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
CONFIG_PINCTRL_MT6765=y
CONFIG_PINCTRL_MT6779=m
CONFIG_PINCTRL_MT6795=y
CONFIG_PINCTRL_MT6797=y
CONFIG_PINCTRL_MT7622=y
CONFIG_PINCTRL_MT7986=y
CONFIG_PINCTRL_MT8167=y
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
CONFIG_PINCTRL_MT8186=y
CONFIG_PINCTRL_MT8188=y
CONFIG_PINCTRL_MT8192=y
CONFIG_PINCTRL_MT8195=y
CONFIG_PINCTRL_MT8365=y
# CONFIG_PINCTRL_MT8516 is not set
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_MESON_GXBB=y
# CONFIG_PINCTRL_MESON_GXL is not set
CONFIG_PINCTRL_MESON8_PMX=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_PINCTRL_MESON_AXG_PMX=y
CONFIG_PINCTRL_MESON_G12A=y
CONFIG_PINCTRL_MESON_A1=y
CONFIG_PINCTRL_MESON_S4=y
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_ARMADA_AP806=y
CONFIG_PINCTRL_ARMADA_CP110=y
CONFIG_PINCTRL_AC5=y
CONFIG_PINCTRL_ARMADA_37XX=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
CONFIG_PINCTRL_PFC_R8A77990=y
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
CONFIG_PINCTRL_PFC_R8A774E1=y
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
CONFIG_PINCTRL_PFC_R8A774B1=y
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
CONFIG_PINCTRL_SUNXI=y
# CONFIG_PINCTRL_SUN4I_A10 is not set
CONFIG_PINCTRL_SUN5I=y
# CONFIG_PINCTRL_SUN6I_A31 is not set
CONFIG_PINCTRL_SUN6I_A31_R=y
# CONFIG_PINCTRL_SUN8I_A23 is not set
# CONFIG_PINCTRL_SUN8I_A33 is not set
CONFIG_PINCTRL_SUN8I_A83T=y
CONFIG_PINCTRL_SUN8I_A83T_R=y
CONFIG_PINCTRL_SUN8I_A23_R=y
CONFIG_PINCTRL_SUN8I_H3=y
# CONFIG_PINCTRL_SUN8I_H3_R is not set
# CONFIG_PINCTRL_SUN8I_V3S is not set
CONFIG_PINCTRL_SUN9I_A80=y
# CONFIG_PINCTRL_SUN9I_A80_R is not set
# CONFIG_PINCTRL_SUN20I_D1 is not set
CONFIG_PINCTRL_SUN50I_A64=y
CONFIG_PINCTRL_SUN50I_A64_R=y
CONFIG_PINCTRL_SUN50I_A100=y
# CONFIG_PINCTRL_SUN50I_A100_R is not set
# CONFIG_PINCTRL_SUN50I_H5 is not set
CONFIG_PINCTRL_SUN50I_H6=y
# CONFIG_PINCTRL_SUN50I_H6_R is not set
CONFIG_PINCTRL_SUN50I_H616=y
CONFIG_PINCTRL_SUN50I_H616_R=y
# CONFIG_PINCTRL_TI_IODELAY is not set
# CONFIG_PINCTRL_UNIPHIER is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=m
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=m
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
CONFIG_GPIO_BRCMSTB=y
CONFIG_GPIO_CADENCE=m
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=m
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_GRGPIO=m
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=m
# CONFIG_GPIO_IOP is not set
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_MVEBU=y
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PL061 is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
CONFIG_GPIO_RCAR=m
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
CONFIG_GPIO_SAMA5D2_PIOBU=y
# CONFIG_GPIO_SIFIVE is not set
CONFIG_GPIO_SIOX=y
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
CONFIG_GPIO_THUNDERX=y
CONFIG_GPIO_UNIPHIER=y
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_WCD934X=m
# CONFIG_GPIO_XGENE is not set
CONFIG_GPIO_XGENE_SB=y
CONFIG_GPIO_XILINX=m
CONFIG_GPIO_XLP=y
# CONFIG_GPIO_ZYNQ is not set
CONFIG_GPIO_AMD_FCH=m
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_GW_PLD is not set
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# CONFIG_GPIO_BD71815 is not set
# CONFIG_GPIO_BD71828 is not set
CONFIG_GPIO_BD9571MWV=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_JANZ_TTL=m
CONFIG_GPIO_KEMPLD=y
# CONFIG_GPIO_LP873X is not set
CONFIG_GPIO_LP87565=m
CONFIG_GPIO_MADERA=m
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SL28CPLD=m
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65218=m
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65912=m
CONFIG_GPIO_TQMX86=m
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM8350=y
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_MLXBF is not set
# CONFIG_GPIO_MLXBF2 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
CONFIG_GPIO_PCIE_IDIO_24=y
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=m
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=m
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_AS3722 is not set
# CONFIG_POWER_RESET_BRCMKONA is not set
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GEMINI_POWEROFF is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_OCELOT_RESET is not set
# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_REGULATOR is not set
CONFIG_POWER_RESET_RESTART=y
# CONFIG_POWER_RESET_XGENE is not set
# CONFIG_POWER_RESET_KEYSTONE is not set
# CONFIG_POWER_RESET_SYSCON is not set
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_POWER_RESET_RMOBILE is not set
CONFIG_REBOOT_MODE=m
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_POWER_RESET_SC27XX is not set
CONFIG_NVMEM_REBOOT_MODE=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_ACT8945A is not set
# CONFIG_BATTERY_CW2015 is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_LEGO_EV3 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
CONFIG_CHARGER_SBS=m
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_CHARGER_DA9150=m
CONFIG_BATTERY_DA9150=m
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=m
CONFIG_BATTERY_MAX1721X=m
# CONFIG_BATTERY_TWL4030_MADC is not set
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_PCF50633=m
CONFIG_BATTERY_RX51=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=m
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_LP8788=m
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX14577 is not set
CONFIG_CHARGER_DETECTOR_MAX14656=m
# CONFIG_CHARGER_MAX77693 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_MP2629=y
# CONFIG_CHARGER_MT6360 is not set
# CONFIG_CHARGER_QCOM_SMBB is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24257=m
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=m
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=m
CONFIG_BATTERY_GAUGE_LTC2941=m
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=m
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_FUEL_GAUGE_SC27XX is not set
CONFIG_CHARGER_UCS1002=m
# CONFIG_CHARGER_BD99954 is not set
CONFIG_RN5T618_POWER=m
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1177=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
CONFIG_SENSORS_AS370=m
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=m
# CONFIG_SENSORS_ARM_SCMI is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DA9055=m
CONFIG_SENSORS_I5K_AMB=m
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=m
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LOCHNAGAR=m
CONFIG_SENSORS_LTC2945=m
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_MLXREG_FAN=m
CONFIG_SENSORS_TC654=m
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=m
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NSA320 is not set
CONFIG_SENSORS_OCC_P8_I2C=m
CONFIG_SENSORS_OCC=m
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not set
# CONFIG_SENSORS_ADM1275 is not set
CONFIG_SENSORS_BEL_PFE=m
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
# CONFIG_SENSORS_LT7182S is not set
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
CONFIG_SENSORS_LTC3815=m
# CONFIG_SENSORS_MAX15301 is not set
# CONFIG_SENSORS_MAX16064 is not set
# CONFIG_SENSORS_MAX16601 is not set
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31785=m
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_MP2888 is not set
CONFIG_SENSORS_MP2975=m
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PLI1209BC is not set
# CONFIG_SENSORS_PM6764TR is not set
CONFIG_SENSORS_PXE1610=m
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
# CONFIG_SENSORS_TPS546D24 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE152 is not set
CONFIG_SENSORS_XDPE122=m
# CONFIG_SENSORS_XDPE122_REGULATOR is not set
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
CONFIG_SENSORS_SL28CPLD=m
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SHT3x=m
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=m
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
CONFIG_SENSORS_TMP513=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83773G=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM8350=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_OF is not set
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
CONFIG_IMX_THERMAL=m
CONFIG_IMX8MM_THERMAL=y
# CONFIG_K3_THERMAL is not set
CONFIG_MAX77620_THERMAL=y
# CONFIG_SPEAR_THERMAL is not set
CONFIG_SUN8I_THERMAL=y
# CONFIG_ROCKCHIP_THERMAL is not set
CONFIG_RCAR_THERMAL=m
CONFIG_RCAR_GEN3_THERMAL=m
# CONFIG_RZG2L_THERMAL is not set
# CONFIG_KIRKWOOD_THERMAL is not set
# CONFIG_DOVE_THERMAL is not set
CONFIG_ARMADA_THERMAL=m
# CONFIG_DA9062_THERMAL is not set
# CONFIG_MTK_THERMAL is not set
CONFIG_AMLOGIC_THERMAL=m
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
CONFIG_BRCMSTB_THERMAL=m
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers
# CONFIG_GENERIC_ADC_THERMAL is not set
#
# Qualcomm thermal drivers
#
# end of Qualcomm thermal drivers
# CONFIG_SPRD_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AC100=m
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_AXP20X_RSB is not set
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=m
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
# CONFIG_MFD_CS47L85 is not set
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=m
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=m
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=m
# CONFIG_HTC_I2CPLD is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_MFD_IQS62X=m
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=m
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77714 is not set
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=y
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SY7636A is not set
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=m
# CONFIG_MFD_RT5120 is not set
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SEC_CORE=m
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=m
CONFIG_MFD_SL28CPLD=m
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_MFD_SKY81452=y
CONFIG_ABX500_CORE=y
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=m
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=m
CONFIG_MFD_TPS65218=m
CONFIG_MFD_TPS6586X=y
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=m
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=m
CONFIG_MFD_VX855=y
CONFIG_MFD_LOCHNAGAR=y
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_ROHM_BD718XX is not set
CONFIG_MFD_ROHM_BD71828=m
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=m
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=m
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=y
# CONFIG_REGULATOR_88PM8607 is not set
CONFIG_REGULATOR_ACT8865=m
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_ARIZONA_LDO1=m
# CONFIG_REGULATOR_ARIZONA_MICSUPP is not set
# CONFIG_REGULATOR_ARM_SCMI is not set
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_BCM590XX=y
# CONFIG_REGULATOR_BD71815 is not set
# CONFIG_REGULATOR_BD71828 is not set
# CONFIG_REGULATOR_BD9571MWV is not set
# CONFIG_REGULATOR_DA9055 is not set
CONFIG_REGULATOR_DA9062=m
# CONFIG_REGULATOR_DA9121 is not set
CONFIG_REGULATOR_DA9210=m
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_FAN53880=m
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_HI6421 is not set
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LOCHNAGAR=m
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP873X is not set
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP87565=m
# CONFIG_REGULATOR_LP8788 is not set
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX77620=y
# CONFIG_REGULATOR_MAX77650 is not set
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8893 is not set
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77686=m
CONFIG_REGULATOR_MAX77693=m
# CONFIG_REGULATOR_MAX77802 is not set
# CONFIG_REGULATOR_MAX77826 is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_MCP16502=m
# CONFIG_REGULATOR_MP5416 is not set
# CONFIG_REGULATOR_MP8859 is not set
# CONFIG_REGULATOR_MP886X is not set
CONFIG_REGULATOR_MPQ7920=m
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6360=y
# CONFIG_REGULATOR_PALMAS is not set
# CONFIG_REGULATOR_PBIAS is not set
CONFIG_REGULATOR_PCA9450=y
# CONFIG_REGULATOR_PCF50633 is not set
# CONFIG_REGULATOR_PF8X00 is not set
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PV88060 is not set
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
CONFIG_REGULATOR_RC5T583=m
# CONFIG_REGULATOR_RN5T618 is not set
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT5033=m
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
# CONFIG_REGULATOR_S2MPA01 is not set
CONFIG_REGULATOR_S2MPS11=m
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
# CONFIG_REGULATOR_SKY81452 is not set
CONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
# CONFIG_REGULATOR_STPMIC1 is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY8106A=m
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS6286X is not set
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65218=m
CONFIG_REGULATOR_TPS6586X=m
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS68470 is not set
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_UNIPHIER=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8994=m
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_MAP=m
# CONFIG_RC_DECODERS is not set
CONFIG_RC_DEVICES=y
# CONFIG_IR_ENE is not set
# CONFIG_IR_FINTEK is not set
CONFIG_IR_GPIO_CIR=m
CONFIG_IR_GPIO_TX=m
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_MESON is not set
# CONFIG_IR_MESON_TX is not set
CONFIG_IR_MTK=m
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_RX51 is not set
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_IR_SUNXI is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_RC_ST is not set
# CONFIG_IR_IMG is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y
#
# CEC support
#
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
CONFIG_CEC_MESON_AO=y
CONFIG_CEC_MESON_G12A_AO=y
CONFIG_CEC_GPIO=m
# CONFIG_CEC_SAMSUNG_S5P is not set
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
# CONFIG_CEC_TEGRA is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_H264=m
CONFIG_V4L2_VP9=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FLASH_LED_CLASS=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options
#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options
#
# Media drivers
#
#
# Media drivers
#
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_STA2X11_VIP is not set
# CONFIG_VIDEO_TW5864 is not set
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m
# CONFIG_VIDEO_ZORAN is not set
#
# Media capture/analog TV support
#
CONFIG_VIDEO_DT3155=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
# CONFIG_VIDEO_CX18 is not set
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_CX88 is not set
CONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_SAA7134_ALSA is not set
# CONFIG_VIDEO_SAA7134_RC is not set
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_SAA7164 is not set
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
CONFIG_DVB_DDBRIDGE=m
CONFIG_DVB_DDBRIDGE_MSIENABLE=y
CONFIG_DVB_DM1105=m
# CONFIG_MANTIS_CORE is not set
CONFIG_DVB_NGENE=m
CONFIG_DVB_PLUTO2=m
# CONFIG_DVB_PT1 is not set
# CONFIG_DVB_PT3 is not set
# CONFIG_DVB_SMIPCIE is not set
CONFIG_RADIO_ADAPTERS=m
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SAA7706H is not set
CONFIG_RADIO_SI4713=m
# CONFIG_RADIO_SI476X is not set
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_PLATFORM_SI4713 is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_V4L_RADIO_ISA_DRIVERS is not set
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_MUX=m
#
# Allegro DVT media platform drivers
#
# CONFIG_VIDEO_ALLEGRO_DVT is not set
#
# Amlogic media platform drivers
#
# CONFIG_VIDEO_MESON_GE2D is not set
#
# Amphion drivers
#
# CONFIG_VIDEO_AMPHION_VPU is not set
#
# Aspeed media platform drivers
#
CONFIG_VIDEO_ASPEED=m
#
# Atmel media platform drivers
#
# CONFIG_VIDEO_ATMEL_ISC is not set
# CONFIG_VIDEO_ATMEL_XISC is not set
# CONFIG_VIDEO_ATMEL_ISI is not set
# CONFIG_VIDEO_MICROCHIP_CSI2DC is not set
#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=m
CONFIG_VIDEO_CADENCE_CSI2TX=m
#
# Chips&Media media platform drivers
#
# CONFIG_VIDEO_CODA is not set
#
# Intel media platform drivers
#
# CONFIG_VIDEO_PXA27x is not set
#
# Marvell media platform drivers
#
CONFIG_VIDEO_CAFE_CCIC=m
# CONFIG_VIDEO_MMP_CAMERA is not set
#
# Mediatek media platform drivers
#
CONFIG_VIDEO_MEDIATEK_JPEG=m
CONFIG_VIDEO_MEDIATEK_MDP=m
CONFIG_VIDEO_MEDIATEK_VCODEC_SCP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_VPU=y
CONFIG_VIDEO_MEDIATEK_VCODEC=m
CONFIG_VIDEO_MEDIATEK_VPU=m
# CONFIG_VIDEO_MEDIATEK_MDP3 is not set
#
# NVidia media platform drivers
#
# CONFIG_VIDEO_TEGRA_VDE is not set
#
# NXP media platform drivers
#
# CONFIG_VIDEO_IMX_MIPI_CSIS is not set
# CONFIG_VIDEO_IMX_PXP is not set
# CONFIG_VIDEO_MX2_EMMAPRP is not set
# CONFIG_VIDEO_DW100 is not set
# CONFIG_VIDEO_IMX8_JPEG is not set
#
# Qualcomm media platform drivers
#
# CONFIG_VIDEO_QCOM_CAMSS is not set
#
# Renesas media platform drivers
#
# CONFIG_VIDEO_RENESAS_CEU is not set
# CONFIG_VIDEO_RCAR_ISP is not set
# CONFIG_VIDEO_SH_VOU is not set
CONFIG_VIDEO_RCAR_CSI2=m
CONFIG_VIDEO_RCAR_VIN=m
# CONFIG_VIDEO_RENESAS_FCP is not set
# CONFIG_VIDEO_RENESAS_JPU is not set
CONFIG_VIDEO_RCAR_DRIF=m
#
# Rockchip media platform drivers
#
# CONFIG_VIDEO_ROCKCHIP_RGA is not set
# CONFIG_VIDEO_ROCKCHIP_ISP1 is not set
#
# Samsung media platform drivers
#
# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set
# CONFIG_VIDEO_S3C_CAMIF is not set
# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
#
# STMicroelectronics media platform drivers
#
# CONFIG_VIDEO_STI_BDISP is not set
# CONFIG_DVB_C8SECTPFE is not set
# CONFIG_VIDEO_STI_DELTA is not set
# CONFIG_VIDEO_STI_HVA is not set
# CONFIG_VIDEO_STM32_DCMI is not set
# CONFIG_VIDEO_STM32_DMA2D is not set
#
# Sunxi media platform drivers
#
CONFIG_VIDEO_SUN4I_CSI=m
CONFIG_VIDEO_SUN6I_CSI=m
# CONFIG_VIDEO_SUN6I_MIPI_CSI2 is not set
# CONFIG_VIDEO_SUN8I_A83T_MIPI_CSI2 is not set
# CONFIG_VIDEO_SUN8I_DEINTERLACE is not set
CONFIG_VIDEO_SUN8I_ROTATE=m
#
# Texas Instruments drivers
#
# CONFIG_VIDEO_TI_CAL is not set
# CONFIG_VIDEO_TI_VPE is not set
# CONFIG_VIDEO_AM437X_VPFE is not set
# CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY is not set
# CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE is not set
# CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY is not set
# CONFIG_VIDEO_OMAP2_VOUT is not set
# CONFIG_VIDEO_OMAP3 is not set
#
# Verisilicon media platform drivers
#
# CONFIG_VIDEO_HANTRO is not set
#
# VIA media platform drivers
#
#
# Xilinx media platform drivers
#
CONFIG_VIDEO_XILINX=m
# CONFIG_VIDEO_XILINX_CSI2RXSS is not set
CONFIG_VIDEO_XILINX_TPG=m
CONFIG_VIDEO_XILINX_VTC=m
#
# MMC/SDIO DVB adapters
#
# CONFIG_SMS_SDIO_DRV is not set
# CONFIG_V4L_TEST_DRIVERS is not set
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=m
# CONFIG_VIDEO_AR0521 is not set
CONFIG_VIDEO_HI556=m
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_HI847 is not set
# CONFIG_VIDEO_IMX208 is not set
CONFIG_VIDEO_IMX214=m
CONFIG_VIDEO_IMX219=m
# CONFIG_VIDEO_IMX258 is not set
CONFIG_VIDEO_IMX274=m
CONFIG_VIDEO_IMX290=m
CONFIG_VIDEO_IMX319=m
# CONFIG_VIDEO_IMX334 is not set
# CONFIG_VIDEO_IMX335 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_IMX412 is not set
CONFIG_VIDEO_MAX9271_LIB=m
# CONFIG_VIDEO_MT9M001 is not set
CONFIG_VIDEO_MT9M032=m
CONFIG_VIDEO_MT9M111=m
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
CONFIG_VIDEO_MT9V032=m
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_OG01A1B is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV08D10 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_OV13B10 is not set
CONFIG_VIDEO_OV2640=m
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
CONFIG_VIDEO_OV2685=m
# CONFIG_VIDEO_OV2740 is not set
# CONFIG_VIDEO_OV5640 is not set
# CONFIG_VIDEO_OV5645 is not set
CONFIG_VIDEO_OV5647=m
# CONFIG_VIDEO_OV5648 is not set
CONFIG_VIDEO_OV5670=m
CONFIG_VIDEO_OV5675=m
# CONFIG_VIDEO_OV5693 is not set
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV6650=m
CONFIG_VIDEO_OV7251=m
# CONFIG_VIDEO_OV7640 is not set
CONFIG_VIDEO_OV7670=m
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7740 is not set
CONFIG_VIDEO_OV8856=m
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9282 is not set
CONFIG_VIDEO_OV9640=m
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
CONFIG_VIDEO_RDACM20=m
# CONFIG_VIDEO_RDACM21 is not set
CONFIG_VIDEO_RJ54N1=m
CONFIG_VIDEO_S5K4ECGX=m
CONFIG_VIDEO_S5K5BAF=m
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K6AA is not set
CONFIG_VIDEO_SR030PC30=m
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_CCS is not set
CONFIG_VIDEO_ET8EK8=m
CONFIG_VIDEO_M5MOLS=m
# end of Camera sensor devices
#
# Lens drivers
#
CONFIG_VIDEO_AD5820=m
CONFIG_VIDEO_AK7375=m
# CONFIG_VIDEO_DW9714 is not set
CONFIG_VIDEO_DW9768=m
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_LM3560=m
CONFIG_VIDEO_LM3646=m
# end of Flash devices
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_SONY_BTF_MPX is not set
CONFIG_VIDEO_TDA1997X=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
# CONFIG_VIDEO_TEA6415C is not set
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_TLV320AIC23B=m
# CONFIG_VIDEO_TVAUDIO is not set
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV748X=m
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
CONFIG_VIDEO_BT819=m
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_ISL7998X is not set
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_MAX9286 is not set
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
# CONFIG_VIDEO_TW2804 is not set
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# end of Video decoders
#
# Video encoders
#
CONFIG_VIDEO_AD9389B=m
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
CONFIG_VIDEO_ADV7343=m
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_THS8200=m
# end of Video encoders
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
# end of Audio/Video compression chips
#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=m
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_ST_MIPID02=m
# CONFIG_VIDEO_THS7303 is not set
# end of Miscellaneous helper chips
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
CONFIG_MEDIA_TUNER_FC0012=m
# CONFIG_MEDIA_TUNER_FC0013 is not set
CONFIG_MEDIA_TUNER_FC2580=m
# CONFIG_MEDIA_TUNER_IT913X is not set
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MT2060=m
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT20XX=m
# CONFIG_MEDIA_TUNER_MT2131 is not set
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MXL301RF=m
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_SI2157 is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_MEDIA_TUNER_TDA18218=m
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA18271=m
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=m
CONFIG_DVB_MXL5XX=m
# CONFIG_DVB_STB0899 is not set
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
# CONFIG_DVB_STV6110x is not set
CONFIG_DVB_STV6111=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=m
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_STV0900 is not set
# CONFIG_DVB_STV6110 is not set
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
# CONFIG_DVB_TUNER_CX24113 is not set
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_ZL10036=m
# CONFIG_DVB_ZL10039 is not set
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_CXD2820R=m
# CONFIG_DVB_CXD2841ER is not set
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
# CONFIG_DVB_DRXD is not set
CONFIG_DVB_EC100=m
CONFIG_DVB_L64781=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_STV0367 is not set
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_ZD1301_DEMOD=m
# CONFIG_DVB_ZL10353 is not set
#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
CONFIG_DVB_TDA10021=m
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_VES1820 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LG2160=m
# CONFIG_DVB_LGDT3305 is not set
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_MXL692=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_DIB8000 is not set
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=m
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
# CONFIG_DVB_TUNER_DIB0090 is not set
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_A8293 is not set
CONFIG_DVB_AF9033=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_HELENE=m
# CONFIG_DVB_HORUS3A is not set
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_LGS8GL5=m
# CONFIG_DVB_LGS8GXX is not set
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
CONFIG_DVB_LNBP21=m
# CONFIG_DVB_LNBP22 is not set
CONFIG_DVB_M88RS2000=m
# CONFIG_DVB_TDA665x is not set
# CONFIG_DVB_DRX39XYJ is not set
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
# CONFIG_DVB_SP2 is not set
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers
#
# Graphics support
#
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KUNIT_TEST=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=m
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_DMA_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SCHED=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_I2C_NXP_TDA9950=m
# end of I2C encoder or helper chips
#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
CONFIG_DRM_MALI_DISPLAY=m
# CONFIG_DRM_KOMEDA is not set
# end of ARM devices
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_KMB_DISPLAY is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_AST=m
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_RCAR_DU is not set
CONFIG_DRM_RCAR_DW_HDMI=m
# CONFIG_DRM_RCAR_USE_LVDS is not set
# CONFIG_DRM_RCAR_MIPI_DSI is not set
CONFIG_DRM_SUN4I=m
CONFIG_DRM_SUN4I_HDMI=m
# CONFIG_DRM_SUN4I_HDMI_CEC is not set
CONFIG_DRM_SUN4I_BACKEND=m
CONFIG_DRM_SUN6I_DSI=m
# CONFIG_DRM_SUN8I_DW_HDMI is not set
CONFIG_DRM_SUN8I_MIXER=m
CONFIG_DRM_SUN8I_TCON_TOP=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_MSM is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
# CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0 is not set
CONFIG_DRM_PANEL_BOE_HIMAX8279D=m
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
# CONFIG_DRM_PANEL_DSI_CM is not set
# CONFIG_DRM_PANEL_LVDS is not set
CONFIG_DRM_PANEL_SIMPLE=m
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_EBBG_FT8719 is not set
# CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=m
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=m
CONFIG_DRM_PANEL_ILITEK_ILI9881C=m
# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
CONFIG_DRM_PANEL_JDI_LT070ME05000=m
# CONFIG_DRM_PANEL_JDI_R63452 is not set
# CONFIG_DRM_PANEL_KHADAS_TS050 is not set
# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=m
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=m
CONFIG_DRM_PANEL_NOVATEK_NT35510=m
# CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT36672A is not set
# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=m
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=m
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=m
# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
# CONFIG_DRM_PANEL_SAMSUNG_SOFEF00 is not set
CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521 is not set
# CONFIG_DRM_PANEL_TDO_TL070WSH30 is not set
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
CONFIG_DRM_PANEL_VISIONOX_RM69299=m
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=m
# CONFIG_DRM_CHIPONE_ICN6211 is not set
CONFIG_DRM_CHRONTEL_CH7033=m
# CONFIG_DRM_CROS_EC_ANX7688 is not set
CONFIG_DRM_DISPLAY_CONNECTOR=m
# CONFIG_DRM_FSL_LDB is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
CONFIG_DRM_LONTIUM_LT9611=m
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
CONFIG_DRM_LVDS_CODEC=m
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
CONFIG_DRM_NWL_MIPI_DSI=m
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
CONFIG_DRM_PARADE_PS8640=m
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
CONFIG_DRM_SII9234=m
CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_THINE_THC63LVD1024=m
CONFIG_DRM_TOSHIBA_TC358762=m
CONFIG_DRM_TOSHIBA_TC358764=m
CONFIG_DRM_TOSHIBA_TC358767=m
CONFIG_DRM_TOSHIBA_TC358768=m
CONFIG_DRM_TOSHIBA_TC358775=m
# CONFIG_DRM_TI_DLPC3433 is not set
CONFIG_DRM_TI_TFP410=m
# CONFIG_DRM_TI_SN65DSI83 is not set
CONFIG_DRM_TI_SN65DSI86=m
CONFIG_DRM_TI_TPD12S015=m
CONFIG_DRM_ANALOGIX_ANX6345=m
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_ANALOGIX_DP=m
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
CONFIG_DRM_I2C_ADV7511=m
# CONFIG_DRM_I2C_ADV7511_AUDIO is not set
# CONFIG_DRM_I2C_ADV7511_CEC is not set
CONFIG_DRM_CDNS_MHDP8546=m
CONFIG_DRM_CDNS_MHDP8546_J721E=y
# CONFIG_DRM_IMX8QM_LDB is not set
# CONFIG_DRM_IMX8QXP_LDB is not set
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
CONFIG_DRM_DW_HDMI=m
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
# CONFIG_DRM_DW_HDMI_I2S_AUDIO is not set
# CONFIG_DRM_DW_HDMI_GP_AUDIO is not set
# CONFIG_DRM_DW_HDMI_CEC is not set
# end of Display Interface Bridges
# CONFIG_DRM_V3D is not set
# CONFIG_DRM_VC4 is not set
# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_HISI_HIBMC=m
CONFIG_DRM_HISI_KIRIN=m
# CONFIG_DRM_LOGICVC is not set
CONFIG_DRM_MEDIATEK=m
# CONFIG_DRM_MEDIATEK_DP is not set
CONFIG_DRM_MEDIATEK_HDMI=m
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=m
# CONFIG_DRM_IMX_LCDIF is not set
# CONFIG_DRM_MESON is not set
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_PL111 is not set
CONFIG_DRM_XEN=y
CONFIG_DRM_XEN_FRONTEND=m
CONFIG_DRM_LIMA=m
CONFIG_DRM_PANFROST=m
# CONFIG_DRM_ASPEED_GFX is not set
CONFIG_DRM_TIDSS=m
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_SPRD is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
# CONFIG_FB is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTD253 is not set
CONFIG_BACKLIGHT_LM3533=m
# CONFIG_BACKLIGHT_OMAP1 is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_QCOM_WLED=m
CONFIG_BACKLIGHT_ADP8860=m
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_SKY81452=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
CONFIG_BACKLIGHT_ARCXCNN=m
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=m
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
# CONFIG_SND_MONA is not set
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_INDIGOIOX=m
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
CONFIG_SND_ENS1370=m
# CONFIG_SND_ENS1371 is not set
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_ES1968_INPUT is not set
# CONFIG_SND_ES1968_RADIO is not set
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
# CONFIG_SND_HDSP is not set
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=m
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CS8409 is not set
CONFIG_SND_HDA_CODEC_CONEXANT=m
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_DSP_CONFIG=m
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_UTILS_KUNIT_TEST=m
# CONFIG_SND_SOC_ADI is not set
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
# CONFIG_SND_AMD_ACP_CONFIG is not set
# CONFIG_SND_SOC_APPLE_MCA is not set
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_BCM2835_SOC_I2S is not set
# CONFIG_SND_SOC_CYGNUS is not set
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
# CONFIG_SND_EP93XX_SOC is not set
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DESIGNWARE_PCM=y
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_MQS=m
CONFIG_SND_SOC_FSL_AUDMIX=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
CONFIG_SND_SOC_FSL_MICFIL=m
# CONFIG_SND_SOC_FSL_XCVR is not set
# CONFIG_SND_SOC_FSL_AUD2HTX is not set
CONFIG_SND_SOC_FSL_UTILS=m
# CONFIG_SND_SOC_FSL_RPMSG is not set
CONFIG_SND_SOC_IMX_PCM_DMA=m
CONFIG_SND_SOC_IMX_AUDMUX=m
CONFIG_SND_IMX_SOC=m
#
# SoC Audio support for Freescale i.MX boards:
#
CONFIG_SND_SOC_IMX_ES8328=m
CONFIG_SND_SOC_IMX_SGTL5000=m
CONFIG_SND_SOC_IMX_SPDIF=m
CONFIG_SND_SOC_FSL_ASOC_CARD=m
CONFIG_SND_SOC_IMX_AUDMIX=m
# CONFIG_SND_SOC_IMX_HDMI is not set
# CONFIG_SND_SOC_IMX_RPMSG is not set
# CONFIG_SND_SOC_IMX_CARD is not set
# end of SoC Audio for Freescale CPUs
# CONFIG_SND_I2S_HI6210_I2S is not set
# CONFIG_SND_JZ4740_SOC_I2S is not set
CONFIG_SND_KIRKWOOD_SOC=m
CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=m
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
# CONFIG_SND_SOC_INTEL_KEEMBAY is not set
# CONFIG_SND_SOC_INTEL_AVS is not set
CONFIG_SND_SOC_INTEL_MACH=y
# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set
CONFIG_SND_SOC_MEDIATEK=m
CONFIG_SND_SOC_MT2701=m
CONFIG_SND_SOC_MT2701_CS42448=m
CONFIG_SND_SOC_MT2701_WM8960=m
CONFIG_SND_SOC_MT6797=m
CONFIG_SND_SOC_MT8173=m
CONFIG_SND_SOC_MT8173_MAX98090=m
CONFIG_SND_SOC_MT8173_RT5650=m
CONFIG_SND_SOC_MT8173_RT5650_RT5514=m
CONFIG_SND_SOC_MT8173_RT5650_RT5676=m
# CONFIG_SND_SOC_MT8183 is not set
# CONFIG_SND_SOC_MT8186 is not set
CONFIG_SND_SOC_MTK_BTCVSD=m
# CONFIG_SND_SOC_MT8192 is not set
# CONFIG_SND_SOC_MT8195 is not set
#
# ASoC support for Amlogic platforms
#
# CONFIG_SND_MESON_AIU is not set
CONFIG_SND_MESON_AXG_FIFO=m
CONFIG_SND_MESON_AXG_FRDDR=m
CONFIG_SND_MESON_AXG_TODDR=m
CONFIG_SND_MESON_AXG_TDM_FORMATTER=m
CONFIG_SND_MESON_AXG_TDM_INTERFACE=m
CONFIG_SND_MESON_AXG_TDMIN=m
CONFIG_SND_MESON_AXG_TDMOUT=m
CONFIG_SND_MESON_AXG_SOUND_CARD=m
CONFIG_SND_MESON_AXG_SPDIFOUT=m
# CONFIG_SND_MESON_AXG_SPDIFIN is not set
CONFIG_SND_MESON_AXG_PDM=m
CONFIG_SND_MESON_CARD_UTILS=m
CONFIG_SND_MESON_CODEC_GLUE=m
CONFIG_SND_MESON_GX_SOUND_CARD=m
CONFIG_SND_MESON_G12A_TOACODEC=m
CONFIG_SND_MESON_G12A_TOHDMITX=m
# CONFIG_SND_SOC_MESON_T9015 is not set
# end of ASoC support for Amlogic platforms
# CONFIG_SND_MXS_SOC is not set
# CONFIG_SND_PXA2XX_SOC is not set
# CONFIG_SND_SOC_QCOM is not set
# CONFIG_SND_SOC_ROCKCHIP is not set
# CONFIG_SND_SOC_SAMSUNG is not set
#
# SoC Audio support for Renesas SoCs
#
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_SOC_RCAR=m
# CONFIG_SND_SOC_RZ is not set
# end of SoC Audio support for Renesas SoCs
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
# CONFIG_SND_SOC_SPRD is not set
# CONFIG_SND_SOC_STI is not set
#
# STMicroelectronics STM32 SOC audio support
#
# CONFIG_SND_SOC_STM32_SAI is not set
# CONFIG_SND_SOC_STM32_I2S is not set
# CONFIG_SND_SOC_STM32_SPDIFRX is not set
# end of STMicroelectronics STM32 SOC audio support
#
# Allwinner SoC Audio support
#
# CONFIG_SND_SUN4I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
CONFIG_SND_SUN50I_CODEC_ANALOG=m
CONFIG_SND_SUN4I_I2S=m
# CONFIG_SND_SUN4I_SPDIF is not set
# CONFIG_SND_SUN50I_DMIC is not set
CONFIG_SND_SUN8I_ADDA_PR_REGMAP=m
# end of Allwinner SoC Audio support
# CONFIG_SND_SOC_TEGRA is not set
#
# Audio support for Texas Instruments SoCs
#
#
# Texas Instruments DAI support for:
#
# CONFIG_SND_SOC_DAVINCI_ASP is not set
# CONFIG_SND_SOC_DAVINCI_MCASP is not set
# CONFIG_SND_SOC_DAVINCI_VCIF is not set
# CONFIG_SND_SOC_OMAP_DMIC is not set
# CONFIG_SND_SOC_OMAP_MCBSP is not set
# CONFIG_SND_SOC_OMAP_MCPDM is not set
#
# Audio support for boards with Texas Instruments SoCs
#
# CONFIG_SND_SOC_OMAP3_TWL4030 is not set
# CONFIG_SND_SOC_OMAP_HDMI is not set
# CONFIG_SND_SOC_J721E_EVM is not set
# end of Audio support for Texas Instruments SoCs
# CONFIG_SND_SOC_UNIPHIER is not set
CONFIG_SND_SOC_XILINX_I2S=m
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
CONFIG_SND_SOC_XILINX_SPDIF=m
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_WM_HUBS=m
# CONFIG_SND_SOC_AC97_CODEC is not set
# CONFIG_SND_SOC_ADAU1372_I2C is not set
CONFIG_SND_SOC_ADAU1701=m
# CONFIG_SND_SOC_ADAU1761_I2C is not set
CONFIG_SND_SOC_ADAU7002=m
# CONFIG_SND_SOC_ADAU7118_HW is not set
# CONFIG_SND_SOC_ADAU7118_I2C is not set
# CONFIG_SND_SOC_AK4118 is not set
# CONFIG_SND_SOC_AK4375 is not set
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK5386=m
# CONFIG_SND_SOC_AK5558 is not set
CONFIG_SND_SOC_ALC5623=m
# CONFIG_SND_SOC_AW8738 is not set
# CONFIG_SND_SOC_BD28623 is not set
CONFIG_SND_SOC_BT_SCO=m
# CONFIG_SND_SOC_CPCAP is not set
# CONFIG_SND_SOC_CS35L32 is not set
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
# CONFIG_SND_SOC_CS35L41_I2C is not set
# CONFIG_SND_SOC_CS35L45_I2C is not set
CONFIG_SND_SOC_CS42L42_CORE=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
CONFIG_SND_SOC_CS42L73=m
# CONFIG_SND_SOC_CS42L83 is not set
CONFIG_SND_SOC_CS4234=m
CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
# CONFIG_SND_SOC_CS4341 is not set
CONFIG_SND_SOC_CS4349=m
# CONFIG_SND_SOC_CS53L30 is not set
CONFIG_SND_SOC_CX2072X=m
# CONFIG_SND_SOC_JZ4740_CODEC is not set
# CONFIG_SND_SOC_JZ4725B_CODEC is not set
# CONFIG_SND_SOC_JZ4760_CODEC is not set
# CONFIG_SND_SOC_JZ4770_CODEC is not set
CONFIG_SND_SOC_DA7213=m
# CONFIG_SND_SOC_DMIC is not set
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES7134=m
# CONFIG_SND_SOC_ES7241 is not set
CONFIG_SND_SOC_ES8316=m
# CONFIG_SND_SOC_ES8326 is not set
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
# CONFIG_SND_SOC_GTM601 is not set
# CONFIG_SND_SOC_HDA is not set
# CONFIG_SND_SOC_ICS43432 is not set
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_LOCHNAGAR_SC=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98090=m
# CONFIG_SND_SOC_MAX98357A is not set
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=m
CONFIG_SND_SOC_MAX98927=m
# CONFIG_SND_SOC_MAX98520 is not set
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
# CONFIG_SND_SOC_MAX98373_SDW is not set
# CONFIG_SND_SOC_MAX98390 is not set
# CONFIG_SND_SOC_MAX98396 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
# CONFIG_SND_SOC_PCM186X_I2C is not set
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM5102A is not set
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
# CONFIG_SND_SOC_RK3328 is not set
# CONFIG_SND_SOC_RK817 is not set
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT1308_SDW=m
# CONFIG_SND_SOC_RT1316_SDW is not set
CONFIG_SND_SOC_RT5514=m
CONFIG_SND_SOC_RT5616=m
# CONFIG_SND_SOC_RT5631 is not set
# CONFIG_SND_SOC_RT5640 is not set
CONFIG_SND_SOC_RT5645=m
# CONFIG_SND_SOC_RT5659 is not set
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
# CONFIG_SND_SOC_RT711_SDCA_SDW is not set
# CONFIG_SND_SOC_RT715_SDW is not set
# CONFIG_SND_SOC_RT715_SDCA_SDW is not set
# CONFIG_SND_SOC_RT9120 is not set
# CONFIG_SND_SOC_SDW_MOCKUP is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
# CONFIG_SND_SOC_SIMPLE_MUX is not set
CONFIG_SND_SOC_SPDIF=m
# CONFIG_SND_SOC_SRC4XXX_I2C is not set
# CONFIG_SND_SOC_SSM2305 is not set
# CONFIG_SND_SOC_SSM2518 is not set
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_I2C=m
# CONFIG_SND_SOC_SSM4567 is not set
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_STA350=m
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
# CONFIG_SND_SOC_TAS2562 is not set
# CONFIG_SND_SOC_TAS2764 is not set
CONFIG_SND_SOC_TAS2770=m
# CONFIG_SND_SOC_TAS2780 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
CONFIG_SND_SOC_TAS5720=m
# CONFIG_SND_SOC_TAS5805M is not set
CONFIG_SND_SOC_TAS6424=m
# CONFIG_SND_SOC_TDA7419 is not set
CONFIG_SND_SOC_TFA9879=m
# CONFIG_SND_SOC_TFA989X is not set
# CONFIG_SND_SOC_TLV320ADC3XXX is not set
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
CONFIG_SND_SOC_TLV320AIC31XX=m
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
# CONFIG_SND_SOC_TLV320AIC3X_I2C is not set
CONFIG_SND_SOC_TLV320ADCX140=m
# CONFIG_SND_SOC_TS3A227E is not set
CONFIG_SND_SOC_TSCS42XX=m
CONFIG_SND_SOC_TSCS454=m
# CONFIG_SND_SOC_UDA1334 is not set
# CONFIG_SND_SOC_WCD9335 is not set
CONFIG_SND_SOC_WCD_MBHC=m
CONFIG_SND_SOC_WCD934X=m
# CONFIG_SND_SOC_WCD938X_SDW is not set
# CONFIG_SND_SOC_WM8510 is not set
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
# CONFIG_SND_SOC_WM8731_I2C is not set
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
# CONFIG_SND_SOC_WM8750 is not set
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8903=m
# CONFIG_SND_SOC_WM8904 is not set
# CONFIG_SND_SOC_WM8940 is not set
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_WM8994=m
CONFIG_SND_SOC_WSA881X=m
# CONFIG_SND_SOC_WSA883X is not set
# CONFIG_SND_SOC_MAX9759 is not set
CONFIG_SND_SOC_MT6351=m
# CONFIG_SND_SOC_MT6358 is not set
CONFIG_SND_SOC_MT6660=m
# CONFIG_SND_SOC_NAU8315 is not set
# CONFIG_SND_SOC_NAU8540 is not set
CONFIG_SND_SOC_NAU8810=m
# CONFIG_SND_SOC_NAU8821 is not set
CONFIG_SND_SOC_NAU8822=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_TPA6130A2=m
# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
# CONFIG_SND_SOC_LPASS_TX_MACRO is not set
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
# CONFIG_SND_AUDIO_GRAPH_CARD is not set
# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
# CONFIG_SND_TEST_COMPONENT is not set
CONFIG_SND_XEN_FRONTEND=m
# CONFIG_SND_VIRTIO is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_COUGAR=m
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=y
# CONFIG_HID_EZKEY is not set
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
CONFIG_HID_KEYTOUCH=m
# CONFIG_HID_KYE is not set
CONFIG_HID_WALTOP=y
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=y
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_LEDS is not set
CONFIG_HID_PLANTRONICS=m
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=m
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=y
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
#
# Intel ISH HID support
#
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=m
# CONFIG_PWRSEQ_EMMC is not set
CONFIG_PWRSEQ_SIMPLE=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
# CONFIG_MMC_CRYPTO is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_ARMMMCI is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_SDHCI_S3C is not set
# CONFIG_MMC_SDHCI_SPEAR is not set
CONFIG_MMC_MESON_GX=m
# CONFIG_MMC_MESON_MX_SDHC is not set
CONFIG_MMC_MESON_MX_SDIO=m
# CONFIG_MMC_MOXART is not set
# CONFIG_MMC_OMAP_HS is not set
# CONFIG_MMC_ALCOR is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_DAVINCI is not set
# CONFIG_MMC_S3C is not set
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_TMIO_CORE=m
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SDHI is not set
CONFIG_MMC_UNIPHIER=m
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_CAVIUM_THUNDERX is not set
CONFIG_MMC_DW=m
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_BLUEFIELD=m
CONFIG_MMC_DW_EXYNOS=m
CONFIG_MMC_DW_HI3798CV200=m
# CONFIG_MMC_DW_K3 is not set
# CONFIG_MMC_DW_PCI is not set
CONFIG_MMC_SH_MMCIF=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_SUNXI=m
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
CONFIG_MMC_TOSHIBA_PCI=m
# CONFIG_MMC_BCM2835 is not set
CONFIG_MMC_MTK=m
CONFIG_MMC_OWL=m
# CONFIG_MMC_LITEX is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_CRYPTO=y
# CONFIG_SCSI_UFS_HPB is not set
# CONFIG_SCSI_UFS_FAULT_INJECTION is not set
# CONFIG_SCSI_UFS_HWMON is not set
CONFIG_SCSI_UFSHCD_PCI=m
CONFIG_SCSI_UFS_DWC_TC_PCI=m
CONFIG_SCSI_UFSHCD_PLATFORM=m
# CONFIG_SCSI_UFS_CDNS_PLATFORM is not set
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
# CONFIG_SCSI_UFS_MEDIATEK is not set
# CONFIG_SCSI_UFS_HISI is not set
# CONFIG_SCSI_UFS_RENESAS is not set
# CONFIG_SCSI_UFS_TI_J721E is not set
# CONFIG_SCSI_UFS_EXYNOS is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=m
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
CONFIG_LEDS_AW2013=y
CONFIG_LEDS_BCM6328=m
CONFIG_LEDS_BCM6358=m
# CONFIG_LEDS_TURRIS_OMNIA is not set
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=y
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP50XX=m
CONFIG_LEDS_LP55XX_COMMON=m
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
CONFIG_LEDS_LP8788=m
CONFIG_LEDS_LP8860=m
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_TCA6507=m
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_MAX8997 is not set
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_IS31FL319X is not set
CONFIG_LEDS_IS31FL32XX=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXREG=m
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=m
# CONFIG_LEDS_LM3697 is not set
CONFIG_LEDS_LM36274=m
CONFIG_LEDS_TPS6105X=y
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=m
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_KTD2692=y
# CONFIG_LEDS_LM3601X is not set
CONFIG_LEDS_MAX77693=m
# CONFIG_LEDS_MT6360 is not set
# CONFIG_LEDS_RT4505 is not set
# CONFIG_LEDS_RT8515 is not set
# CONFIG_LEDS_SGM3140 is not set
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_AL_MC is not set
CONFIG_EDAC_THUNDERX=y
# CONFIG_EDAC_SYNOPSYS is not set
# CONFIG_EDAC_XGENE is not set
# CONFIG_EDAC_BLUEFIELD is not set
CONFIG_EDAC_DMC520=m
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_AMBA_PL08X=y
# CONFIG_APPLE_ADMAC is not set
# CONFIG_AXI_DMAC is not set
# CONFIG_BCM_SBA_RAID is not set
# CONFIG_DMA_JZ4780 is not set
# CONFIG_DMA_SA11X0 is not set
CONFIG_DMA_SUN6I=y
CONFIG_DW_AXI_DMAC=m
# CONFIG_EP93XX_DMA is not set
CONFIG_FSL_EDMA=y
CONFIG_FSL_QDMA=y
# CONFIG_HISI_DMA is not set
# CONFIG_IMG_MDC_DMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOP_ADMA is not set
# CONFIG_K3_DMA is not set
# CONFIG_LPC18XX_DMAMUX is not set
# CONFIG_MCF_EDMA is not set
# CONFIG_MILBEAUT_HDMAC is not set
# CONFIG_MILBEAUT_XDMAC is not set
# CONFIG_MMP_PDMA is not set
# CONFIG_MMP_TDMA is not set
CONFIG_MV_XOR=y
# CONFIG_MV_XOR_V2 is not set
CONFIG_MXS_DMA=y
# CONFIG_NBPFAXI_DMA is not set
CONFIG_OWL_DMA=y
# CONFIG_PCH_DMA is not set
CONFIG_PL330_DMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_STM32_DMA is not set
# CONFIG_STM32_DMAMUX is not set
# CONFIG_STM32_MDMA is not set
# CONFIG_SPRD_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
# CONFIG_TEGRA186_GPC_DMA is not set
# CONFIG_TEGRA20_APB_DMA is not set
# CONFIG_TEGRA210_ADMA is not set
# CONFIG_TIMB_DMA is not set
CONFIG_UNIPHIER_MDMAC=m
CONFIG_UNIPHIER_XDMAC=m
# CONFIG_XGENE_DMA is not set
# CONFIG_XILINX_DMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
CONFIG_XILINX_ZYNQMP_DPDMA=m
# CONFIG_MTK_HSDMA is not set
CONFIG_MTK_CQDMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_RZN1_DMAMUX is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_DW_EDMA=y
CONFIG_DW_EDMA_PCIE=m
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
# CONFIG_SH_DMAE is not set
CONFIG_RCAR_DMAC=m
CONFIG_RENESAS_USB_DMAC=m
# CONFIG_RZ_DMAC is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_FSL_DPAA2_QDMA is not set
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
CONFIG_DMABUF_DEBUG=y
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=m
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=m
CONFIG_HD44780=m
CONFIG_IMG_ASCII_LCD=y
# CONFIG_LCD2S is not set
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=m
CONFIG_UIO=y
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=y
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=y
CONFIG_UIO_PRUSS=m
CONFIG_UIO_MF624=y
CONFIG_VFIO=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PLATFORM=m
# CONFIG_VFIO_AMBA is not set
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=m
# CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET is not set
# CONFIG_VFIO_MDEV is not set
CONFIG_VFIO_FSL_MC=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not set
CONFIG_XEN_DEV_EVTCHN=m
# CONFIG_XEN_BACKEND is not set
CONFIG_XENFS=m
# CONFIG_XEN_COMPAT_XENFS is not set
# CONFIG_XEN_SYS_HYPERVISOR is not set
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
CONFIG_XEN_GRANT_DEV_ALLOC=m
CONFIG_XEN_GRANT_DMA_ALLOC=y
CONFIG_SWIOTLB_XEN=y
# CONFIG_XEN_PVCALLS_FRONTEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_FRONT_PGDIR_SHBUF=m
# CONFIG_XEN_VIRTIO is not set
# end of Xen driver support
CONFIG_GREYBUS=y
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
CONFIG_GOLDFISH=y
CONFIG_GOLDFISH_PIPE=m
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CROS_EC is not set
CONFIG_MELLANOX_PLATFORM=y
# CONFIG_MLXREG_HOTPLUG is not set
# CONFIG_MLXREG_IO is not set
# CONFIG_MLXREG_LC is not set
# CONFIG_NVSW_SN2201 is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_HI655X is not set
CONFIG_COMMON_CLK_SCMI=m
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=m
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI514=m
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
# CONFIG_COMMON_CLK_BM1880 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_TPS68470 is not set
CONFIG_COMMON_CLK_CDCE925=m
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_CLK_QORIQ is not set
CONFIG_CLK_LS1028A_PLLDIG=m
CONFIG_COMMON_CLK_XGENE=y
# CONFIG_COMMON_CLK_LOCHNAGAR is not set
CONFIG_COMMON_CLK_PALMAS=y
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
CONFIG_COMMON_CLK_VC5=y
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
# CONFIG_COMMON_CLK_BD718XX is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_STUB_CLK_HI6220 is not set
# CONFIG_STUB_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_BOSTON is not set
CONFIG_MXC_CLK=y
# CONFIG_CLK_IMX8MM is not set
CONFIG_CLK_IMX8MN=y
# CONFIG_CLK_IMX8MP is not set
CONFIG_CLK_IMX8MQ=y
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
CONFIG_COMMON_CLK_MT6779=y
# CONFIG_COMMON_CLK_MT6779_MMSYS is not set
# CONFIG_COMMON_CLK_MT6779_IMGSYS is not set
CONFIG_COMMON_CLK_MT6779_IPESYS=y
# CONFIG_COMMON_CLK_MT6779_CAMSYS is not set
CONFIG_COMMON_CLK_MT6779_VDECSYS=y
CONFIG_COMMON_CLK_MT6779_VENCSYS=y
# CONFIG_COMMON_CLK_MT6779_MFGCFG is not set
CONFIG_COMMON_CLK_MT6779_AUDSYS=y
CONFIG_COMMON_CLK_MT6795=y
CONFIG_COMMON_CLK_MT6795_MFGCFG=y
CONFIG_COMMON_CLK_MT6795_MMSYS=y
CONFIG_COMMON_CLK_MT6795_VDECSYS=y
CONFIG_COMMON_CLK_MT6795_VENCSYS=y
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
CONFIG_COMMON_CLK_MT7986=y
CONFIG_COMMON_CLK_MT7986_ETHSYS=y
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
CONFIG_COMMON_CLK_MT8183=y
# CONFIG_COMMON_CLK_MT8183_AUDIOSYS is not set
CONFIG_COMMON_CLK_MT8183_CAMSYS=y
# CONFIG_COMMON_CLK_MT8183_IMGSYS is not set
CONFIG_COMMON_CLK_MT8183_IPU_CORE0=y
# CONFIG_COMMON_CLK_MT8183_IPU_CORE1 is not set
# CONFIG_COMMON_CLK_MT8183_IPU_ADL is not set
CONFIG_COMMON_CLK_MT8183_IPU_CONN=y
# CONFIG_COMMON_CLK_MT8183_MFGCFG is not set
CONFIG_COMMON_CLK_MT8183_MMSYS=y
# CONFIG_COMMON_CLK_MT8183_VDECSYS is not set
# CONFIG_COMMON_CLK_MT8183_VENCSYS is not set
CONFIG_COMMON_CLK_MT8186=y
CONFIG_COMMON_CLK_MT8192=y
# CONFIG_COMMON_CLK_MT8192_AUDSYS is not set
# CONFIG_COMMON_CLK_MT8192_CAMSYS is not set
# CONFIG_COMMON_CLK_MT8192_IMGSYS is not set
# CONFIG_COMMON_CLK_MT8192_IMP_IIC_WRAP is not set
# CONFIG_COMMON_CLK_MT8192_IPESYS is not set
# CONFIG_COMMON_CLK_MT8192_MDPSYS is not set
# CONFIG_COMMON_CLK_MT8192_MFGCFG is not set
# CONFIG_COMMON_CLK_MT8192_MMSYS is not set
# CONFIG_COMMON_CLK_MT8192_MSDC is not set
# CONFIG_COMMON_CLK_MT8192_SCP_ADSP is not set
# CONFIG_COMMON_CLK_MT8192_VDECSYS is not set
# CONFIG_COMMON_CLK_MT8192_VENCSYS is not set
CONFIG_COMMON_CLK_MT8195=y
CONFIG_COMMON_CLK_MT8365=y
CONFIG_COMMON_CLK_MT8365_APU=y
CONFIG_COMMON_CLK_MT8365_CAM=y
CONFIG_COMMON_CLK_MT8365_MFG=y
CONFIG_COMMON_CLK_MT8365_MMSYS=y
CONFIG_COMMON_CLK_MT8365_VDEC=y
CONFIG_COMMON_CLK_MT8365_VENC=y
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
CONFIG_COMMON_CLK_MESON_REGMAP=y
CONFIG_COMMON_CLK_MESON_DUALDIV=y
CONFIG_COMMON_CLK_MESON_MPLL=y
CONFIG_COMMON_CLK_MESON_PHASE=m
CONFIG_COMMON_CLK_MESON_PLL=y
CONFIG_COMMON_CLK_MESON_SCLK_DIV=m
CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y
CONFIG_COMMON_CLK_MESON_AO_CLKC=y
CONFIG_COMMON_CLK_MESON_EE_CLKC=y
CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y
CONFIG_COMMON_CLK_GXBB=y
CONFIG_COMMON_CLK_AXG=y
CONFIG_COMMON_CLK_AXG_AUDIO=m
CONFIG_COMMON_CLK_G12A=y
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
CONFIG_ARMADA_AP_CP_HELPER=y
CONFIG_ARMADA_37XX_CLK=y
CONFIG_ARMADA_AP806_SYSCON=y
CONFIG_ARMADA_CP110_SYSCON=y
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
CONFIG_CLK_RENESAS=y
# CONFIG_CLK_EMEV2 is not set
# CONFIG_CLK_RZA1 is not set
# CONFIG_CLK_R7S9210 is not set
# CONFIG_CLK_R8A73A4 is not set
# CONFIG_CLK_R8A7740 is not set
# CONFIG_CLK_R8A7742 is not set
# CONFIG_CLK_R8A7743 is not set
# CONFIG_CLK_R8A7745 is not set
# CONFIG_CLK_R8A77470 is not set
# CONFIG_CLK_R8A774A1 is not set
CONFIG_CLK_R8A774B1=y
# CONFIG_CLK_R8A774C0 is not set
CONFIG_CLK_R8A774E1=y
# CONFIG_CLK_R8A7778 is not set
# CONFIG_CLK_R8A7779 is not set
# CONFIG_CLK_R8A7790 is not set
# CONFIG_CLK_R8A7791 is not set
# CONFIG_CLK_R8A7792 is not set
# CONFIG_CLK_R8A7794 is not set
# CONFIG_CLK_R8A7795 is not set
CONFIG_CLK_R8A77960=y
# CONFIG_CLK_R8A77961 is not set
CONFIG_CLK_R8A77965=y
# CONFIG_CLK_R8A77970 is not set
# CONFIG_CLK_R8A77980 is not set
CONFIG_CLK_R8A77990=y
# CONFIG_CLK_R8A77995 is not set
# CONFIG_CLK_R8A779A0 is not set
# CONFIG_CLK_R8A779F0 is not set
# CONFIG_CLK_R8A779G0 is not set
# CONFIG_CLK_R9A06G032 is not set
# CONFIG_CLK_R9A07G043 is not set
# CONFIG_CLK_R9A07G044 is not set
# CONFIG_CLK_R9A07G054 is not set
# CONFIG_CLK_R9A09G011 is not set
# CONFIG_CLK_SH73A0 is not set
CONFIG_CLK_RCAR_CPG_LIB=y
# CONFIG_CLK_RCAR_GEN2_CPG is not set
CONFIG_CLK_RCAR_GEN3_CPG=y
# CONFIG_CLK_RCAR_GEN4_CPG is not set
CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
# CONFIG_CLK_RZG2L is not set
CONFIG_CLK_RENESAS_CPG_MSSR=y
# CONFIG_CLK_RENESAS_CPG_MSTP is not set
CONFIG_CLK_RENESAS_DIV6=y
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
# CONFIG_CLK_SUNXI_PRCM_SUN6I is not set
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
# CONFIG_CLK_SUNXI_PRCM_SUN9I is not set
CONFIG_SUNXI_CCU=y
# CONFIG_SUNIV_F1C100S_CCU is not set
# CONFIG_SUN20I_D1_CCU is not set
# CONFIG_SUN20I_D1_R_CCU is not set
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_A100_CCU=y
CONFIG_SUN50I_A100_R_CCU=y
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H616_CCU=y
# CONFIG_SUN50I_H6_R_CCU is not set
# CONFIG_SUN4I_A10_CCU is not set
# CONFIG_SUN5I_CCU is not set
# CONFIG_SUN6I_A31_CCU is not set
CONFIG_SUN6I_RTC_CCU=y
# CONFIG_SUN8I_A23_CCU is not set
# CONFIG_SUN8I_A33_CCU is not set
CONFIG_SUN8I_A83T_CCU=y
CONFIG_SUN8I_H3_CCU=y
# CONFIG_SUN8I_V3S_CCU is not set
# CONFIG_SUN8I_DE2_CCU is not set
# CONFIG_SUN8I_R40_CCU is not set
# CONFIG_SUN9I_A80_CCU is not set
CONFIG_SUN8I_R_CCU=y
# CONFIG_COMMON_CLK_TI_ADPLL is not set
CONFIG_CLK_UNIPHIER=y
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=y
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
CONFIG_DW_APB_TIMER=y
CONFIG_DW_APB_TIMER_OF=y
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_ROCKCHIP_TIMER is not set
# CONFIG_MESON6_TIMER is not set
CONFIG_OWL_TIMER=y
# CONFIG_RDA_TIMER is not set
CONFIG_SUN4I_TIMER=y
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_KEYSTONE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
# CONFIG_ARC_TIMERS is not set
CONFIG_ARM_ARCH_TIMER=y
# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
CONFIG_FSL_ERRATUM_A008585=y
# CONFIG_HISILICON_ERRATUM_161010101 is not set
CONFIG_ARM64_ERRATUM_858921=y
CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_EXYNOS_MCT is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
CONFIG_SYS_SUPPORTS_SH_CMT=y
CONFIG_MTK_TIMER=y
# CONFIG_SPRD_TIMER is not set
CONFIG_SYS_SUPPORTS_SH_TMU=y
# CONFIG_CLKSRC_JCORE_PIT is not set
CONFIG_SH_TIMER_CMT=y
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
CONFIG_SH_TIMER_TMU=y
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_CLKSRC_IMX_GPT is not set
# CONFIG_CLKSRC_IMX_TPM is not set
CONFIG_TIMER_IMX_SYS_CTR=y
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
CONFIG_MICROCHIP_PIT64B=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
# CONFIG_APPLE_MAILBOX is not set
CONFIG_ARM_MHU=y
# CONFIG_ARM_MHU_V2 is not set
# CONFIG_IMX_MBOX is not set
# CONFIG_PLATFORM_MHU is not set
# CONFIG_PL320_MBOX is not set
CONFIG_ARMADA_37XX_RWTM_MBOX=m
# CONFIG_ROCKCHIP_MBOX is not set
# CONFIG_ALTERA_MBOX is not set
# CONFIG_HI3660_MBOX is not set
# CONFIG_HI6220_MBOX is not set
CONFIG_MAILBOX_TEST=y
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
# CONFIG_QCOM_APCS_IPC is not set
# CONFIG_XGENE_SLIMPRO_MBOX is not set
# CONFIG_BCM_PDC_MBOX is not set
# CONFIG_BCM_FLEXRM_MBOX is not set
# CONFIG_STM32_IPCC is not set
# CONFIG_MTK_ADSP_MBOX is not set
CONFIG_MTK_CMDQ_MBOX=m
# CONFIG_ZYNQMP_IPI_MBOX is not set
CONFIG_SUN6I_MSGBOX=y
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST=y
# CONFIG_IOMMU_IO_PGTABLE_DART is not set
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
# CONFIG_OMAP_IOMMU is not set
# CONFIG_ROCKCHIP_IOMMU is not set
CONFIG_SUN50I_IOMMU=y
CONFIG_IPMMU_VMSA=y
# CONFIG_APPLE_DART is not set
CONFIG_ARM_SMMU=m
CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
CONFIG_ARM_SMMU_V3=y
# CONFIG_ARM_SMMU_V3_SVA is not set
# CONFIG_S390_CCW_IOMMU is not set
# CONFIG_S390_AP_IOMMU is not set
CONFIG_MTK_IOMMU=y
# CONFIG_QCOM_IOMMU is not set
CONFIG_VIRTIO_IOMMU=y
# CONFIG_SPRD_IOMMU is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# CONFIG_INGENIC_VPU_RPROC is not set
CONFIG_MTK_SCP=m
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
# CONFIG_RPMSG_CTRL is not set
# CONFIG_RPMSG_NS is not set
CONFIG_RPMSG_MTK_SCP=m
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=m
#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_QCOM=m
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_OWL_PM_DOMAINS is not set
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=m
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
CONFIG_MESON_EE_PM_DOMAINS=y
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_PMGR_PWRSTATE is not set
# CONFIG_APPLE_RTKIT is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
CONFIG_SOC_BRCMSTB=y
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_QUICC_ENGINE=y
CONFIG_UCC_SLOW=y
CONFIG_UCC=y
CONFIG_FSL_GUTS=y
CONFIG_FSL_MC_DPIO=y
CONFIG_DPAA2_CONSOLE=y
# CONFIG_FSL_RCPM is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
CONFIG_IMX_GPCV2_PM_DOMAINS=y
CONFIG_SOC_IMX8M=y
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
CONFIG_MTK_CMDQ=m
# CONFIG_MTK_DEVAPC is not set
CONFIG_MTK_INFRACFG=y
# CONFIG_MTK_PMIC_WRAP is not set
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_SCPSYS_PM_DOMAINS=y
CONFIG_MTK_MMSYS=y
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_AOSS_QMP is not set
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_APR is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
CONFIG_SOC_RENESAS=y
CONFIG_ARCH_RCAR_GEN3=y
# CONFIG_ARCH_R8A77995 is not set
CONFIG_ARCH_R8A77990=y
# CONFIG_ARCH_R8A77950 is not set
# CONFIG_ARCH_R8A77951 is not set
CONFIG_ARCH_R8A77965=y
CONFIG_ARCH_R8A77960=y
# CONFIG_ARCH_R8A77961 is not set
# CONFIG_ARCH_R8A779F0 is not set
# CONFIG_ARCH_R8A77980 is not set
# CONFIG_ARCH_R8A77970 is not set
# CONFIG_ARCH_R8A779A0 is not set
# CONFIG_ARCH_R8A779G0 is not set
# CONFIG_ARCH_R8A774C0 is not set
CONFIG_ARCH_R8A774E1=y
# CONFIG_ARCH_R8A774A1 is not set
CONFIG_ARCH_R8A774B1=y
# CONFIG_ARCH_R9A07G043 is not set
# CONFIG_ARCH_R9A07G044 is not set
# CONFIG_ARCH_R9A07G054 is not set
# CONFIG_ARCH_R9A09G011 is not set
CONFIG_RST_RCAR=y
CONFIG_SYSC_RCAR=y
# CONFIG_SYSC_RCAR_GEN4 is not set
# CONFIG_SYSC_R8A77995 is not set
# CONFIG_SYSC_R8A7794 is not set
CONFIG_SYSC_R8A77990=y
# CONFIG_SYSC_R8A7779 is not set
# CONFIG_SYSC_R8A7790 is not set
# CONFIG_SYSC_R8A7795 is not set
# CONFIG_SYSC_R8A7791 is not set
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77960=y
# CONFIG_SYSC_R8A77961 is not set
# CONFIG_SYSC_R8A779F0 is not set
# CONFIG_SYSC_R8A7792 is not set
# CONFIG_SYSC_R8A77980 is not set
# CONFIG_SYSC_R8A77970 is not set
# CONFIG_SYSC_R8A779A0 is not set
# CONFIG_SYSC_R8A779G0 is not set
# CONFIG_SYSC_RMOBILE is not set
# CONFIG_SYSC_R8A77470 is not set
# CONFIG_SYSC_R8A7745 is not set
# CONFIG_SYSC_R8A7742 is not set
# CONFIG_SYSC_R8A7743 is not set
# CONFIG_SYSC_R8A774C0 is not set
CONFIG_SYSC_R8A774E1=y
# CONFIG_SYSC_R8A774A1 is not set
CONFIG_SYSC_R8A774B1=y
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_ROCKCHIP_PM_DOMAINS is not set
# CONFIG_SOC_SAMSUNG is not set
CONFIG_SUNXI_MBUS=y
CONFIG_SUNXI_SRAM=y
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
CONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
CONFIG_DEVFREQ_GOV_POWERSAVE=m
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=m
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
CONFIG_ARM_IMX_BUS_DEVFREQ=m
# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
# CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP is not set
# CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU is not set
# CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_FSA9480=m
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
# CONFIG_EXTCON_MAX77693 is not set
# CONFIG_EXTCON_MAX77843 is not set
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=m
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ARM_PL172_MPMC is not set
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
CONFIG_BRCMSTB_DPFE=y
# CONFIG_BRCMSTB_MEMC is not set
# CONFIG_BT1_L2_CTL is not set
# CONFIG_TI_AEMIF is not set
# CONFIG_TI_EMIF is not set
# CONFIG_OMAP_GPMC is not set
# CONFIG_MVEBU_DEVBUS is not set
# CONFIG_FSL_CORENET_CF is not set
# CONFIG_FSL_IFC is not set
# CONFIG_JZ4780_NEMC is not set
CONFIG_MTK_SMI=y
# CONFIG_DA8XX_DDRCTL is not set
# CONFIG_PL353_SMC is not set
CONFIG_RENESAS_RPCIF=m
# CONFIG_STM32_FMC2_EBI is not set
# CONFIG_SAMSUNG_MC is not set
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
# CONFIG_TEGRA210_EMC is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
# CONFIG_IIO_SW_TRIGGER is not set
# CONFIG_IIO_TRIGGERED_EVENT is not set
#
# Accelerometers
#
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL355_I2C is not set
# CONFIG_ADXL367_I2C is not set
# CONFIG_ADXL372_I2C is not set
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
# CONFIG_DA280 is not set
CONFIG_DA311=m
# CONFIG_DMARD06 is not set
CONFIG_DMARD09=y
CONFIG_DMARD10=m
# CONFIG_FXLS8962AF_I2C is not set
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
CONFIG_KXSD9=y
# CONFIG_KXSD9_I2C is not set
CONFIG_KXCJK1013=m
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
CONFIG_MMA7660=y
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
# CONFIG_MMA9553 is not set
# CONFIG_MSA311 is not set
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=y
CONFIG_STK8312=y
CONFIG_STK8BA50=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7091R5=y
CONFIG_AD7291=m
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD799X=y
CONFIG_ADI_AXI_ADC=y
# CONFIG_ASPEED_ADC is not set
# CONFIG_AT91_ADC is not set
# CONFIG_AT91_SAMA5D2_ADC is not set
# CONFIG_BCM_IPROC_ADC is not set
CONFIG_BERLIN2_ADC=m
CONFIG_CC10001_ADC=m
CONFIG_DA9150_GPADC=m
CONFIG_ENVELOPE_DETECTOR=m
# CONFIG_EXYNOS_ADC is not set
CONFIG_HX711=y
# CONFIG_INA2XX_ADC is not set
# CONFIG_INGENIC_ADC is not set
CONFIG_IMX7D_ADC=m
# CONFIG_IMX8QXP_ADC is not set
CONFIG_LP8788_ADC=y
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=m
CONFIG_LTC2497=m
CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP3422=m
# CONFIG_MEDIATEK_MT6360_ADC is not set
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
# CONFIG_MESON_SARADC is not set
CONFIG_MP2629_ADC=y
CONFIG_NAU7802=m
# CONFIG_NPCM_ADC is not set
CONFIG_PALMAS_GPADC=m
# CONFIG_RCAR_GYRO_ADC is not set
CONFIG_RN5T618_ADC=m
# CONFIG_ROCKCHIP_SARADC is not set
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=y
# CONFIG_STM32_ADC_CORE is not set
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
CONFIG_TI_ADC081C=m
CONFIG_TI_ADS1015=m
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
# CONFIG_VF610_ADC is not set
CONFIG_XILINX_XADC=y
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=m
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_HMC425=m
# end of Amplifiers
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7746 is not set
# end of Capacitance to digital converters
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_CCS811=y
CONFIG_IAQCORE=m
# CONFIG_SCD30_CORE is not set
# CONFIG_SCD4X is not set
CONFIG_SENSIRION_SGP30=m
# CONFIG_SENSIRION_SGP40 is not set
# CONFIG_SPS30_I2C is not set
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
CONFIG_VZ89X=m
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=m
#
# IIO SCMI Sensors
#
# CONFIG_IIO_SCMI is not set
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5380=y
CONFIG_AD5446=m
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
CONFIG_DPOT_DAC=m
# CONFIG_DS4424 is not set
# CONFIG_LPC18XX_DAC is not set
CONFIG_M62332=m
CONFIG_MAX517=y
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
# CONFIG_STM32_DAC is not set
# CONFIG_TI_DAC5571 is not set
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters
#
# IIO dummy driver
#
# end of IIO dummy driver
#
# Filters
#
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
# CONFIG_BMG160 is not set
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=y
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4404=m
CONFIG_MAX30100=m
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=y
# CONFIG_DHT11 is not set
CONFIG_HDC100X=m
CONFIG_HDC2010=m
# CONFIG_HID_SENSOR_HUMIDITY is not set
# CONFIG_HTS221 is not set
CONFIG_HTU21=m
CONFIG_SI7005=y
# CONFIG_SI7020 is not set
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
# CONFIG_BOSCH_BNO055_I2C is not set
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_IIO_ST_LSM6DSX is not set
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units
#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
CONFIG_ADUX1020=m
CONFIG_AL3010=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
# CONFIG_APDS9960 is not set
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
CONFIG_CM3323=y
CONFIG_CM3605=y
# CONFIG_CM36651 is not set
CONFIG_GP2AP002=m
# CONFIG_GP2AP020A00F is not set
CONFIG_IQS621_ALS=m
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=y
# CONFIG_ISL29125 is not set
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
# CONFIG_RPR0521 is not set
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=y
# CONFIG_LTRF216A is not set
CONFIG_LV0104CS=y
# CONFIG_MAX44000 is not set
CONFIG_MAX44009=y
CONFIG_NOA1305=y
CONFIG_OPT3001=y
# CONFIG_PA12203001 is not set
# CONFIG_SI1133 is not set
CONFIG_SI1145=y
# CONFIG_STK3310 is not set
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_TCS3414=m
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=y
# CONFIG_TSL2591 is not set
CONFIG_TSL2772=m
# CONFIG_TSL4531 is not set
CONFIG_US5182D=m
CONFIG_VCNL4000=y
# CONFIG_VCNL4035 is not set
CONFIG_VEML6030=y
# CONFIG_VEML6070 is not set
CONFIG_VL6180=y
# CONFIG_ZOPT2201 is not set
# end of Light sensors
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_MAG3110=m
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors
#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
# end of Inclinometer sensors
CONFIG_IIO_RESCALE_KUNIT_TEST=m
CONFIG_IIO_FORMAT_KUNIT_TEST=y
#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone
#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set
# end of Linear and angular position sensors
#
# Digital potentiometers
#
# CONFIG_AD5110 is not set
CONFIG_AD5272=y
CONFIG_DS1803=m
CONFIG_MAX5432=m
CONFIG_MCP4018=m
CONFIG_MCP4531=y
CONFIG_TPL0102=y
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats
#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
# CONFIG_BMP280 is not set
CONFIG_DLHL60D=y
CONFIG_DPS310=m
# CONFIG_HID_SENSOR_PRESS is not set
CONFIG_HP03=y
CONFIG_ICP10100=m
# CONFIG_MPL115_I2C is not set
CONFIG_MPL3115=y
CONFIG_MS5611=m
CONFIG_MS5611_I2C=m
CONFIG_MS5637=m
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=y
CONFIG_HP206C=m
# CONFIG_ZPA2326 is not set
# end of Pressure sensors
#
# Lightning sensors
#
# end of Lightning sensors
#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_MB1232 is not set
# CONFIG_PING is not set
CONFIG_RFD77402=m
CONFIG_SRF04=m
CONFIG_SX_COMMON=m
CONFIG_SX9310=m
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
CONFIG_SX9500=m
# CONFIG_SRF08 is not set
# CONFIG_VCNL3020 is not set
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=m
CONFIG_HID_SENSOR_TEMP=m
CONFIG_MLX90614=y
CONFIG_MLX90632=y
CONFIG_TMP006=y
# CONFIG_TMP007 is not set
# CONFIG_TMP117 is not set
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
# end of Temperature sensors
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
CONFIG_NTB_IDT=m
# CONFIG_NTB_EPF is not set
# CONFIG_NTB_SWITCHTEC is not set
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_TOOL=m
# CONFIG_NTB_PERF is not set
CONFIG_NTB_TRANSPORT=m
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
CONFIG_ALPINE_MSI=y
CONFIG_AL_FIC=y
CONFIG_DW_APB_ICTL=y
CONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
CONFIG_RENESAS_IRQC=y
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
CONFIG_SUN6I_R_INTC=y
CONFIG_SUNXI_NMI_INTC=y
# CONFIG_TS4800_IRQ is not set
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
CONFIG_MVEBU_GICP=y
CONFIG_MVEBU_ICU=y
CONFIG_MVEBU_ODMI=y
CONFIG_MVEBU_PIC=y
CONFIG_MVEBU_SEI=y
CONFIG_PARTITION_PERCPU=y
CONFIG_IRQ_UNIPHIER_AIDET=y
CONFIG_MESON_IRQ_GPIO=y
# CONFIG_IMX_IRQSTEER is not set
CONFIG_IMX_INTMUX=y
# CONFIG_IMX_MU_MSI is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
CONFIG_MST_IRQ=y
# CONFIG_APPLE_AIC is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
CONFIG_RESET_BERLIN=y
# CONFIG_RESET_BRCMSTB is not set
CONFIG_RESET_BRCMSTB_RESCAL=y
# CONFIG_RESET_HSDK is not set
CONFIG_RESET_IMX7=m
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
CONFIG_RESET_MESON=y
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
CONFIG_RESET_SCMI=m
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
CONFIG_RESET_SUNXI=y
# CONFIG_RESET_TI_SCI is not set
CONFIG_RESET_TI_SYSCON=y
# CONFIG_RESET_TI_TPS380X is not set
# CONFIG_RESET_TN48M_CPLD is not set
CONFIG_RESET_UNIPHIER=y
# CONFIG_RESET_UNIPHIER_GLUE is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
CONFIG_PHY_XGENE=m
# CONFIG_PHY_CAN_TRANSCEIVER is not set
CONFIG_PHY_SUN6I_MIPI_DPHY=m
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=y
CONFIG_PHY_MESON_G12A_USB2=y
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_NS2_USB_DRD is not set
CONFIG_PHY_BRCM_SATA=m
CONFIG_PHY_BRCM_USB=y
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_TORRENT is not set
CONFIG_PHY_CADENCE_DPHY=m
# CONFIG_PHY_CADENCE_DPHY_RX is not set
CONFIG_PHY_CADENCE_SIERRA=m
# CONFIG_PHY_CADENCE_SALVO is not set
CONFIG_PHY_FSL_IMX8MQ_USB=m
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
CONFIG_PHY_MIXEL_MIPI_DPHY=y
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
CONFIG_PHY_BERLIN_SATA=m
CONFIG_PHY_BERLIN_USB=y
# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_MVEBU_CP110_COMPHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
CONFIG_PHY_MTK_TPHY=y
# CONFIG_PHY_MTK_UFS is not set
CONFIG_PHY_MTK_XSPHY=m
CONFIG_PHY_MTK_HDMI=y
CONFIG_PHY_MTK_MIPI_DSI=m
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
# CONFIG_PHY_LAN966X_SERDES is not set
CONFIG_PHY_OCELOT_SERDES=y
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
CONFIG_PHY_RCAR_GEN2=m
CONFIG_PHY_RCAR_GEN3_PCIE=m
CONFIG_PHY_RCAR_GEN3_USB3=m
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
# CONFIG_IDLE_INJECT is not set
# CONFIG_DTPM is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_ARM_CCI_PMU is not set
CONFIG_ARM_CCN=y
# CONFIG_ARM_CMN is not set
CONFIG_ARM_PMU=y
# CONFIG_ARM_SMMU_V3_PMU is not set
CONFIG_ARM_DSU_PMU=y
CONFIG_FSL_IMX8_DDR_PMU=y
CONFIG_XGENE_PMU=y
CONFIG_ARM_SPE_PMU=m
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_MARVELL_CN10K_TAD_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
# CONFIG_HISI_PCIE_PMU is not set
# CONFIG_HNS3_PMU is not set
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_USB4 is not set
#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_BINDERFS is not set
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
CONFIG_NVMEM_IMX_IIM=y
CONFIG_NVMEM_IMX_OCOTP=y
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
CONFIG_NVMEM_SUNXI_SID=y
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
# CONFIG_NVMEM_ZYNQMP is not set
#
# HW tracing support
#
CONFIG_STM=y
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
# CONFIG_STM_DUMMY is not set
# CONFIG_STM_SOURCE_CONSOLE is not set
# CONFIG_STM_SOURCE_HEARTBEAT is not set
CONFIG_STM_SOURCE_FTRACE=y
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=y
CONFIG_INTEL_TH_MSU=y
# CONFIG_INTEL_TH_PTI is not set
# CONFIG_INTEL_TH_DEBUG is not set
# CONFIG_HISI_PTT is not set
# end of HW tracing support
CONFIG_FPGA=m
# CONFIG_FPGA_MGR_SOCFPGA is not set
# CONFIG_FPGA_MGR_SOCFPGA_A10 is not set
CONFIG_ALTERA_PR_IP_CORE=m
# CONFIG_ALTERA_PR_IP_CORE_PLAT is not set
# CONFIG_FPGA_MGR_ALTERA_CVP is not set
# CONFIG_FPGA_MGR_ZYNQ_FPGA is not set
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
# CONFIG_OF_FPGA_REGION is not set
# CONFIG_FPGA_DFL is not set
# CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set
# CONFIG_FPGA_MGR_VERSAL_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
# CONFIG_MUX_GPIO is not set
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=y
# CONFIG_SIOX_BUS_GPIO is not set
CONFIG_SLIMBUS=y
# CONFIG_SLIM_QCOM_CTRL is not set
# CONFIG_SLIM_QCOM_NGD_CTRL is not set
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=m
# CONFIG_INTERCONNECT_IMX8MM is not set
# CONFIG_INTERCONNECT_IMX8MN is not set
# CONFIG_INTERCONNECT_IMX8MQ is not set
# CONFIG_INTERCONNECT_IMX8MP is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_DEBUG=y
# CONFIG_XFS_ASSERT_FATAL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
# CONFIG_F2FS_STAT_FS is not set
# CONFIG_F2FS_FS_XATTR is not set
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
# CONFIG_F2FS_FS_LZO is not set
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
# CONFIG_F2FS_FS_ZSTD is not set
CONFIG_F2FS_IOSTAT=y
CONFIG_ZONEFS_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_KUNIT_TEST=m
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_CEPH_FS=y
# CONFIG_CEPH_FS_POSIX_ACL is not set
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS2=y
# CONFIG_CIFS_ALLOW_INSECURE_LEGACY is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SWN_UPCALL is not set
CONFIG_SMBFS_COMMON=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
# CONFIG_AFS_DEBUG_CURSOR is not set
CONFIG_9P_FS=m
# CONFIG_9P_FS_POSIX_ACL is not set
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=m
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=y
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=y
# CONFIG_DLM_DEPRECATED_API is not set
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=32768
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_FORTIFY_SOURCE is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
CONFIG_SECURITY_SELINUX_DISABLE=y
# CONFIG_SECURITY_SELINUX_DEVELOP is not set
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
CONFIG_SECURITY_SMACK=y
# CONFIG_SECURITY_SMACK_BRINGUP is not set
# CONFIG_SECURITY_SMACK_APPEND_SIGNALS is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
CONFIG_SECURITY_APPARMOR=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
# CONFIG_SECURITY_APPARMOR_HASH is not set
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
CONFIG_SECURITY_APPARMOR_KUNIT_TEST=y
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENFORCE=y
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_INTEGRITY_AUDIT is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,tomoyo,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_CC_HAS_RANDSTRUCT=y
# CONFIG_RANDSTRUCT_NONE is not set
CONFIG_RANDSTRUCT_FULL=y
CONFIG_RANDSTRUCT=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
CONFIG_CRYPTO_SM2=y
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_AEGIS128_SIMD=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_VMAC=y
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=m
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_NHPOLY1305_NEON=m
# CONFIG_CRYPTO_CHACHA20_NEON is not set
#
# Accelerated Cryptographic Algorithms for CPU (arm64)
#
# CONFIG_CRYPTO_GHASH_ARM64_CE is not set
CONFIG_CRYPTO_POLY1305_NEON=m
# CONFIG_CRYPTO_SHA1_ARM64_CE is not set
CONFIG_CRYPTO_SHA256_ARM64=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_SHA512_ARM64=m
# CONFIG_CRYPTO_SHA512_ARM64_CE is not set
CONFIG_CRYPTO_SHA3_ARM64=m
CONFIG_CRYPTO_SM3_ARM64_CE=m
# CONFIG_CRYPTO_POLYVAL_ARM64_CE is not set
CONFIG_CRYPTO_AES_ARM64=m
CONFIG_CRYPTO_AES_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=m
# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
# CONFIG_CRYPTO_AES_ARM64_BS is not set
# CONFIG_CRYPTO_SM4_ARM64_CE is not set
# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
# end of Accelerated Cryptographic Algorithms for CPU (arm64)
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_SUN4I_SS=y
CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
# CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG is not set
CONFIG_CRYPTO_DEV_SUN8I_CE=y
# CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG is not set
CONFIG_CRYPTO_DEV_SUN8I_CE_HASH=y
# CONFIG_CRYPTO_DEV_SUN8I_CE_PRNG is not set
# CONFIG_CRYPTO_DEV_SUN8I_CE_TRNG is not set
CONFIG_CRYPTO_DEV_SUN8I_SS=m
CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG=y
# CONFIG_CRYPTO_DEV_SUN8I_SS_PRNG is not set
# CONFIG_CRYPTO_DEV_SUN8I_SS_HASH is not set
# CONFIG_CRYPTO_DEV_SL3516 is not set
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
# CONFIG_CRYPTO_DEV_S5P is not set
# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
CONFIG_CRYPTO_DEV_ATMEL_I2C=m
CONFIG_CRYPTO_DEV_ATMEL_ECC=m
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m
CONFIG_CRYPTO_DEV_CCP=y
# CONFIG_CRYPTO_DEV_CCP_DD is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_CPT=m
CONFIG_CAVIUM_CPT=m
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
# CONFIG_CRYPTO_DEV_OCTEONTX_CPT is not set
CONFIG_CRYPTO_DEV_CAVIUM_ZIP=y
# CONFIG_CRYPTO_DEV_QCE is not set
# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CRYPTO_DEV_SAFEXCEL=y
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_HISI_SEC is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
# CONFIG_CRYPTO_DEV_SA2UL is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU is not set
# CONFIG_CRYPTO_DEV_ASPEED is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=m
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
# CONFIG_INDIRECT_PIO is not set
# CONFIG_TRACE_MMIO_ACCESS is not set
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=m
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_AUDIT_COMPAT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_RESTRICTED_POOL is not set
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
# CONFIG_CPUMASK_OFFSTACK is not set
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=m
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_INFO_COMPRESSED=y
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_PAHOLE_HAS_BTF_TAG=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
CONFIG_HEADERS_INSTALL=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_VMLINUX_MAP is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_CC_HAS_UBSAN_ARRAY_BOUNDS=y
# CONFIG_UBSAN_BOUNDS is not set
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_INFO=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
# CONFIG_DEBUG_PREEMPT is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_SCF_TORTURE_TEST=y
CONFIG_CSD_LOCK_WAIT_DEBUG=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=m
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# arm64 Debugging
#
CONFIG_PID_IN_CONTEXTIDR=y
CONFIG_ARM64_RELOC_TEST=m
CONFIG_CORESIGHT=m
CONFIG_CORESIGHT_LINKS_AND_SINKS=m
CONFIG_CORESIGHT_LINK_AND_SINK_TMC=m
CONFIG_CORESIGHT_CATU=m
# CONFIG_CORESIGHT_SINK_TPIU is not set
# CONFIG_CORESIGHT_SINK_ETBV10 is not set
CONFIG_CORESIGHT_SOURCE_ETM4X=m
# CONFIG_ETM4X_IMPDEF_FEATURE is not set
CONFIG_CORESIGHT_STM=m
CONFIG_CORESIGHT_CPU_DEBUG=m
# CONFIG_CORESIGHT_CPU_DEBUG_DEFAULT_ON is not set
CONFIG_CORESIGHT_CTI=m
# CONFIG_CORESIGHT_CTI_INTEGRATION_REGS is not set
# CONFIG_CORESIGHT_TRBE is not set
# end of arm64 Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_KUNIT_DEFAULT_ENABLED=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=m
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAULT_INJECTION_USERCOPY=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAIL_MMC_REQUEST is not set
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
# CONFIG_KCOV_ENABLE_COMPARISONS is not set
# CONFIG_KCOV_INSTRUMENT_ALL is not set
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 6:26 ` Christoph Hellwig
@ 2022-12-06 13:05 ` Jason Gunthorpe
2022-12-06 13:09 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 13:05 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 07:26:04AM +0100, Christoph Hellwig wrote:
> all here). In Linux the equivalent would be to implement a mdev driver
> that allows passing through the I/O qeues to a guest, but it might
Definately not - "mdev" drivers should be avoided as much as possible.
In this case Intel has a real PCI SRIOV VF to expose to the guest,
with a full VF RID. The proper VFIO abstraction is the variant PCI
driver as this series does. We want to use the variant PCI drivers
because they properly encapsulate all the PCI behaviors (MSI, config
space, regions, reset, etc) without requiring re-implementation of this
in mdev drivers.
mdev drivers should only be considered if a real PCI VF is not
available - eg because the device is doing "SIOV" or something.
We have several migration drivers in VFIO now following this general
pattern, from what I can see they have done it broadly properly from a
VFIO perspective.
> be a better idea to handle the device model emulation entirely in
> Qemu (or other userspace device models) and just find a way to expose
> enough of the I/O queues to userspace.
This is much closer to the VDPA model which is basically providing a
some kernel support to access the IO queue and a lot of SW in qemu to
generate the PCI device in the VM.
The approach has positives and negatives, we have done both in mlx5
devices and we have a preference toward the VFIO model. VPDA
specifically is very big and complicated compared to the VFIO
approach.
Overall having fully functional PCI SRIOV VF's available lets more
uses cases work than just "qemu to create a VM". qemu can always build
a VDPA like thing by using VFIO and VFIO live migration to shift
control of the device between qemu and HW.
I don't think we know enough about this space at the moment to fix a
specification to one path or the other, so I hope the TPAR will settle
on something that can support both models in SW and people can try
things out.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 13:05 ` Jason Gunthorpe
@ 2022-12-06 13:09 ` Christoph Hellwig
2022-12-06 13:52 ` Jason Gunthorpe
2022-12-09 2:05 ` Tian, Kevin
0 siblings, 2 replies; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 13:09 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 09:05:05AM -0400, Jason Gunthorpe wrote:
> In this case Intel has a real PCI SRIOV VF to expose to the guest,
> with a full VF RID.
RID?
> The proper VFIO abstraction is the variant PCI
> driver as this series does. We want to use the variant PCI drivers
> because they properly encapsulate all the PCI behaviors (MSI, config
> space, regions, reset, etc) without requiring re-implementation of this
> in mdev drivers.
I don't think the code in this series has any chance of actually
working. There is a lot of state associated with a NVMe subsystem,
controller and namespace, such as the serial number, subsystem NQN,
namespace uniqueue identifiers, Get/Set features state, pending AENs,
log page content. Just migrating from one device to another without
capturing all this has no chance of actually working.
> I don't think we know enough about this space at the moment to fix a
> specification to one path or the other, so I hope the TPAR will settle
> on something that can support both models in SW and people can try
> things out.
I've not seen anyone from Intel actually contributing to the live
migration TPAR, which is almost two month old by now.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 6:19 ` Christoph Hellwig
@ 2022-12-06 13:44 ` Jason Gunthorpe
2022-12-06 13:51 ` Keith Busch
2022-12-06 13:58 ` Christoph Hellwig
0 siblings, 2 replies; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 13:44 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 07:19:40AM +0100, Christoph Hellwig wrote:
> On Tue, Dec 06, 2022 at 01:58:12PM +0800, Lei Rao wrote:
> > The new function nvme_submit_vf_cmd() helps the host VF driver to issue
> > VF admin commands. It's helpful in some cases that the host NVMe driver
> > does not control VF's admin queue. For example, in the virtualization
> > device pass-through case, the VF controller's admin queue is governed
> > by the Guest NVMe driver. Host VF driver relies on PF device's admin
> > queue to control VF devices like vendor-specific live migration commands.
>
> WTF are you even smoking when you think this would be acceptable?
Not speaking to NVMe - but this driver is clearly copying mlx5's live
migration driver, almost completely - including this basic function.
So, to explain why mlx5 works this way..
The VFIO approach is to fully assign an entire VF to the guest OS. The
entire VF assignment means every MMIO register *and all the DMA* of
the VF is owned by the guest operating system.
mlx5 needs to transfer hundreds of megabytes to gigabytes of in-device
state to perform a migration.
So, we must be able to use DMA to transfer the data. However, the VM
exclusively controls the DMA of the VF. The iommu_domain of the VF
belongs to the guest VM through VFIO, and we simply cannot mutate
it. Not only should not, but physically can not, ie when IOMMU nested
translation is in use and the IO page tables are in guest VM memory.
So the VF cannot be used to control the migration, or transfer the
migration data. This leaves only the PF.
Thus, mxl5 has the same sort of design where the VF VFIO driver
reaches into the PF kernel driver and asks the PF driver to perform
some commands targeting the PF's own VFs. The DMA is then done using
the RID of the PF, and reaches the kernel owned iommu_domain of the
PF. This way the entire operation is secure aginst meddling by the
guest.
We can contrast this with the hisilicon live migration driver that
does not use the PF for control. Instead it has a very small state
that the migration driver simply reads out of registers. The VF has a
page of registers that control pause/go of the queues and the VFIO
varient driver denies access to this page from the guest VM so that
the kernel VFIO driver has reliable control over the VF.
Without involving PASID this is broadly the only two choices for doing
SRIOV live migration, AFAIK.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 4/5] nvme-vfio: check if the hardware supports live migration
2022-12-06 5:58 ` [RFC PATCH 4/5] nvme-vfio: check if the hardware supports " Lei Rao
@ 2022-12-06 13:47 ` Keith Busch
0 siblings, 0 replies; 71+ messages in thread
From: Keith Busch @ 2022-12-06 13:47 UTC (permalink / raw)
To: Lei Rao
Cc: axboe, kch, hch, sagi, alex.williamson, cohuck, jgg, yishaih,
shameerali.kolothum.thodi, kevin.tian, mjrosato, linux-kernel,
linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu, Konrad.wilk,
stephen, hang.yuan
On Tue, Dec 06, 2022 at 01:58:15PM +0800, Lei Rao wrote:
> +static bool nvmevf_check_migration(struct pci_dev *pdev)
> +{
> + struct nvme_command c = { };
> + struct nvme_id_ctrl *id;
> + u8 live_mig_support;
> + int ret;
> +
> + c.identify.opcode = nvme_admin_identify;
> + c.identify.cns = NVME_ID_CNS_CTRL;
> +
> + id = kmalloc(sizeof(struct nvme_id_ctrl), GFP_KERNEL);
> + if (!id)
> + return false;
> +
> + ret = nvme_submit_vf_cmd(pdev, &c, NULL, id, sizeof(struct nvme_id_ctrl));
> + if (ret) {
> + dev_warn(&pdev->dev, "Get identify ctrl failed (ret=0x%x)\n", ret);
> + goto out;
> + }
> +
> + live_mig_support = id->vs[0];
Considering this is a vendor specific region, it seems rather presumptuous to
assume this byte means "live migration supported".
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 13:44 ` Jason Gunthorpe
@ 2022-12-06 13:51 ` Keith Busch
2022-12-06 14:27 ` Jason Gunthorpe
2022-12-06 13:58 ` Christoph Hellwig
1 sibling, 1 reply; 71+ messages in thread
From: Keith Busch @ 2022-12-06 13:51 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, axboe, kch, sagi, alex.williamson,
cohuck, yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 09:44:08AM -0400, Jason Gunthorpe wrote:
> On Tue, Dec 06, 2022 at 07:19:40AM +0100, Christoph Hellwig wrote:
> > On Tue, Dec 06, 2022 at 01:58:12PM +0800, Lei Rao wrote:
> > > The new function nvme_submit_vf_cmd() helps the host VF driver to issue
> > > VF admin commands. It's helpful in some cases that the host NVMe driver
> > > does not control VF's admin queue. For example, in the virtualization
> > > device pass-through case, the VF controller's admin queue is governed
> > > by the Guest NVMe driver. Host VF driver relies on PF device's admin
> > > queue to control VF devices like vendor-specific live migration commands.
> >
> > WTF are you even smoking when you think this would be acceptable?
>
> Not speaking to NVMe - but this driver is clearly copying mlx5's live
> migration driver, almost completely - including this basic function.
>
> So, to explain why mlx5 works this way..
>
> The VFIO approach is to fully assign an entire VF to the guest OS. The
> entire VF assignment means every MMIO register *and all the DMA* of
> the VF is owned by the guest operating system.
>
> mlx5 needs to transfer hundreds of megabytes to gigabytes of in-device
> state to perform a migration.
For storage, though, you can't just transfer the controller state. You have to
transfer all the namespace user data, too. So potentially many terabytes?
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 13:09 ` Christoph Hellwig
@ 2022-12-06 13:52 ` Jason Gunthorpe
2022-12-06 14:00 ` Christoph Hellwig
2022-12-09 2:05 ` Tian, Kevin
1 sibling, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 13:52 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 02:09:01PM +0100, Christoph Hellwig wrote:
> On Tue, Dec 06, 2022 at 09:05:05AM -0400, Jason Gunthorpe wrote:
> > In this case Intel has a real PCI SRIOV VF to expose to the guest,
> > with a full VF RID.
>
> RID?
"Requester ID" - PCI SIG term that in Linux basically means you get to
assign an iommu_domain to the vfio device.
Compared to a mdev where many vfio devices will share the same RID and
cannot have iommu_domain's without using PASID.
> > The proper VFIO abstraction is the variant PCI
> > driver as this series does. We want to use the variant PCI drivers
> > because they properly encapsulate all the PCI behaviors (MSI, config
> > space, regions, reset, etc) without requiring re-implementation of this
> > in mdev drivers.
>
> I don't think the code in this series has any chance of actually
> working. There is a lot of state associated with a NVMe subsystem,
> controller and namespace, such as the serial number, subsystem NQN,
> namespace uniqueue identifiers, Get/Set features state, pending AENs,
> log page content. Just migrating from one device to another without
> capturing all this has no chance of actually working.
From what I understood this series basically allows two Intel devices
to pass a big opaque blob of data. Intel didn't document what is in
that blob, so I assume it captures everything you mention above.
At least, that is the approach we have taken with mlx5. Every single
bit of device state is serialized into the blob and when the device
resumes it is indistinguishable from the original. Otherwise it is a
bug.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 13:44 ` Jason Gunthorpe
2022-12-06 13:51 ` Keith Busch
@ 2022-12-06 13:58 ` Christoph Hellwig
2022-12-06 15:22 ` Jason Gunthorpe
1 sibling, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 13:58 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 09:44:08AM -0400, Jason Gunthorpe wrote:
> Not speaking to NVMe - but this driver is clearly copying mlx5's live
> migration driver, almost completely - including this basic function.
Maybe that's not a good idea in an NVMe environment, and maybe that
should have talked to the standards committee before spending their
time on cargo cult engineering.
Most importantly NVMe is very quiet on the relationship between
VFs and PFs, and there is no way to guarantee that a PF is, at the
NVMe level, much in control of a VF at all. In other words this
concept really badly breaks NVMe abstractions.
> Thus, mxl5 has the same sort of design where the VF VFIO driver
> reaches into the PF kernel driver and asks the PF driver to perform
> some commands targeting the PF's own VFs. The DMA is then done using
> the RID of the PF, and reaches the kernel owned iommu_domain of the
> PF. This way the entire operation is secure aginst meddling by the
> guest.
And the works for you because you have a clearly defined relationship.
In NVMe we do not have this. We'd either need to define a way
to query that relationship or find another way to deal with the
problem. But in doubt the best design would be to drive VF
live migration entirely from the PF, turn the lookup from controlled
function to controlling function upside down, that is a list of
controlled functions (which could very well be, and in some designs
are, additional PFs and not VFs) by controlling function. In fact
NVMe already has that list in it's architecture with the
"Secondary Controller List".
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 13:52 ` Jason Gunthorpe
@ 2022-12-06 14:00 ` Christoph Hellwig
2022-12-06 14:20 ` Jason Gunthorpe
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 14:00 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 09:52:54AM -0400, Jason Gunthorpe wrote:
> On Tue, Dec 06, 2022 at 02:09:01PM +0100, Christoph Hellwig wrote:
> > On Tue, Dec 06, 2022 at 09:05:05AM -0400, Jason Gunthorpe wrote:
> > > In this case Intel has a real PCI SRIOV VF to expose to the guest,
> > > with a full VF RID.
> >
> > RID?
>
> "Requester ID" - PCI SIG term that in Linux basically means you get to
> assign an iommu_domain to the vfio device.
Yeah I now the Requester ID, I've just never seen that shortcut for it.
> >From what I understood this series basically allows two Intel devices
> to pass a big opaque blob of data. Intel didn't document what is in
> that blob, so I assume it captures everything you mention above.
Which would be just as bad, because it then changes the IDs under
the live OS on a restore. This is not something that can be done
behind the back of the hypervisors / control plane OS.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 14:00 ` Christoph Hellwig
@ 2022-12-06 14:20 ` Jason Gunthorpe
2022-12-06 14:31 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 14:20 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 03:00:02PM +0100, Christoph Hellwig wrote:
> > >From what I understood this series basically allows two Intel devices
> > to pass a big opaque blob of data. Intel didn't document what is in
> > that blob, so I assume it captures everything you mention above.
>
> Which would be just as bad, because it then changes the IDs under
> the live OS on a restore. This is not something that can be done
> behind the back of the hypervisors / control plane OS.
Sorry, what live OS?
In the VFIO restore model there is no "live OS" on resume. The
load/resume cycle is as destructive as reset to the vfio device.
When qemu operates vfio the destination CPU will not be running until
the load/resume of all the VFIO devices is completed.
So from the VM perspective it sees a complete no change, so long as
the data blob causes the destination vfio device to fully match the
source, including all IDs, etc.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 13:51 ` Keith Busch
@ 2022-12-06 14:27 ` Jason Gunthorpe
0 siblings, 0 replies; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 14:27 UTC (permalink / raw)
To: Keith Busch
Cc: Christoph Hellwig, Lei Rao, axboe, kch, sagi, alex.williamson,
cohuck, yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 01:51:32PM +0000, Keith Busch wrote:
> On Tue, Dec 06, 2022 at 09:44:08AM -0400, Jason Gunthorpe wrote:
> > On Tue, Dec 06, 2022 at 07:19:40AM +0100, Christoph Hellwig wrote:
> > > On Tue, Dec 06, 2022 at 01:58:12PM +0800, Lei Rao wrote:
> > > > The new function nvme_submit_vf_cmd() helps the host VF driver to issue
> > > > VF admin commands. It's helpful in some cases that the host NVMe driver
> > > > does not control VF's admin queue. For example, in the virtualization
> > > > device pass-through case, the VF controller's admin queue is governed
> > > > by the Guest NVMe driver. Host VF driver relies on PF device's admin
> > > > queue to control VF devices like vendor-specific live migration commands.
> > >
> > > WTF are you even smoking when you think this would be acceptable?
> >
> > Not speaking to NVMe - but this driver is clearly copying mlx5's live
> > migration driver, almost completely - including this basic function.
> >
> > So, to explain why mlx5 works this way..
> >
> > The VFIO approach is to fully assign an entire VF to the guest OS. The
> > entire VF assignment means every MMIO register *and all the DMA* of
> > the VF is owned by the guest operating system.
> >
> > mlx5 needs to transfer hundreds of megabytes to gigabytes of in-device
> > state to perform a migration.
>
> For storage, though, you can't just transfer the controller state. You have to
> transfer all the namespace user data, too. So potentially many terabytes?
There are two different scenarios - lets call it shared medium and
local medium.
If the medium is shared then only the controller state needs to be
transfered. The controller state would include enough information to
locate and identify the shared medium.
This would apply to cases like DPU/smart NIC, multi-port physical
drives, etc.
local medium will require the medium copy. Within Linux I don't have a
clear sense if that should be done within the VFIO migration
framework, or if it would better to have its own operations.
For the NVMe spec I'd strongly suggest keeping medium copy as its own
set of commands.
It will be interesting to see how to standardize all these scenarios :)
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 14:20 ` Jason Gunthorpe
@ 2022-12-06 14:31 ` Christoph Hellwig
2022-12-06 14:48 ` Jason Gunthorpe
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 14:31 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 10:20:26AM -0400, Jason Gunthorpe wrote:
> In the VFIO restore model there is no "live OS" on resume. The
> load/resume cycle is as destructive as reset to the vfio device.
Of course there may be and OS. As soon as the VF is live Linux
will by default bind to it. And that's the big problem here,
the VF should not actually exist or at least not be usable when
such a restore happens - or to say it in NVMe terms, the Secondary
Controller better be in offline state when state is loaded into it.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 14:31 ` Christoph Hellwig
@ 2022-12-06 14:48 ` Jason Gunthorpe
2022-12-06 15:01 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 14:48 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 03:31:26PM +0100, Christoph Hellwig wrote:
> On Tue, Dec 06, 2022 at 10:20:26AM -0400, Jason Gunthorpe wrote:
> > In the VFIO restore model there is no "live OS" on resume. The
> > load/resume cycle is as destructive as reset to the vfio device.
>
> Of course there may be and OS. As soon as the VF is live Linux
> will by default bind to it. And that's the big problem here,
> the VF should not actually exist or at least not be usable when
> such a restore happens - or to say it in NVMe terms, the Secondary
> Controller better be in offline state when state is loaded into it.
Sadly in Linux we don't have a SRIOV VF lifecycle model that is any
use.
What we do have is a transfer of control from the normal OS driver (eg
nvme) to the VFIO driver. Also, remember, that VFIO only does live
migration between VFIO devices. We cannot use live migration and end
up with a situation where the normal nvme driver is controlling the
VF.
The VFIO load model is explicitly destructive. We replace the current
VF with the loading VF. Both the VFIO variant driver and the VFIO
userspace issuing the load have to be aware of this and understand
that the whole device will change.
From an implementation perspective, I would expect the nvme varient
driver to either place the nvme device in the correct state during
load, or refuse to execute load if it is in the wrong state.
To be compatible with what qemu is doing the "right state" should be
entered by completing function level reset of the VF.
The Linux/qemu parts are still being finalized, so if you see
something that could be changed to better match nvme it would be a
great time to understand that.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 14:48 ` Jason Gunthorpe
@ 2022-12-06 15:01 ` Christoph Hellwig
2022-12-06 15:28 ` Jason Gunthorpe
2022-12-11 12:05 ` Max Gurtovoy
0 siblings, 2 replies; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 15:01 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 10:48:22AM -0400, Jason Gunthorpe wrote:
> Sadly in Linux we don't have a SRIOV VF lifecycle model that is any
> use.
Beward: The secondary function might as well be a physical function
as well. In fact one of the major customers for "smart" multifunction
nvme devices prefers multi-PF devices over SR-IOV VFs. (and all the
symmetric dual ported devices are multi-PF as well).
So this isn't really about a VF live cycle, but how to manage life
migration, especially on the receive / restore side. And restoring
the entire controller state is extremely invasive and can't be done
on a controller that is in any classic form live. In fact a lot
of the state is subsystem-wide, so without some kind of virtualization
of the subsystem it is impossible to actually restore the state.
To cycle back to the hardware that is posted here, I'm really confused
how it actually has any chance to work and no one has even tried
to explain how it is supposed to work.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 13:58 ` Christoph Hellwig
@ 2022-12-06 15:22 ` Jason Gunthorpe
2022-12-06 15:38 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 15:22 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 02:58:10PM +0100, Christoph Hellwig wrote:
> Most importantly NVMe is very quiet on the relationship between
> VFs and PFs, and there is no way to guarantee that a PF is, at the
> NVMe level, much in control of a VF at all. In other words this
> concept really badly breaks NVMe abstractions.
Yeah, I think the spec effort is going to be interesting for sure.
From a pure Linux and implementation perspective a decision must be
made early on how to label the DMAs for kernel/qemu vs VM controlled
items at the PCI TLP level.
> controlled functions (which could very well be, and in some designs
> are, additional PFs and not VFs) by controlling function.
In principle PF vs VF doesn't matter much - the question is really TLP
labeling. If the spec says RID A is the controlling RID and RID B is
the guest RID, then it doesn't matter if they have a PF/VF
relationship or PF/PF relationship.
We have locking issues in Linux SW connecting different SW drivers for
things that are not a PF/VF relationship, but perhaps that can be
solved.
Using VF RID / VF PASID is appealing at first glance, but there is
list of PCI emulation details that have to be worked out for that to
be good. eg what do you do with guest triggered FLR? Or guest
triggered memory disable? How do you handle PCIe AER? Also lack of
PASID support in CPUs is problematic.
Lots of trade offs..
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 15:01 ` Christoph Hellwig
@ 2022-12-06 15:28 ` Jason Gunthorpe
2022-12-06 15:35 ` Christoph Hellwig
2022-12-11 12:05 ` Max Gurtovoy
1 sibling, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 15:28 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 04:01:31PM +0100, Christoph Hellwig wrote:
> So this isn't really about a VF live cycle, but how to manage life
> migration, especially on the receive / restore side. And restoring
> the entire controller state is extremely invasive and can't be done
> on a controller that is in any classic form live. In fact a lot
> of the state is subsystem-wide, so without some kind of virtualization
> of the subsystem it is impossible to actually restore the state.
I cannot speak to nvme, but for mlx5 the VF is laregly a contained
unit so we just replace the whole thing.
From the PF there is some observability, eg the VF's MAC address is
visible and a few other things. So the PF has to re-synchronize after
the migration to get those things aligned.
> To cycle back to the hardware that is posted here, I'm really confused
> how it actually has any chance to work and no one has even tried
> to explain how it is supposed to work.
I'm interested as well, my mental model goes as far as mlx5 and
hisillicon, so if nvme prevents the VFs from being contained units, it
is a really big deviation from VFIO's migration design..
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 15:28 ` Jason Gunthorpe
@ 2022-12-06 15:35 ` Christoph Hellwig
2022-12-06 18:00 ` Dong, Eddie
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 15:35 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 11:28:12AM -0400, Jason Gunthorpe wrote:
> I'm interested as well, my mental model goes as far as mlx5 and
> hisillicon, so if nvme prevents the VFs from being contained units, it
> is a really big deviation from VFIO's migration design..
In NVMe the controller (which maps to a PCIe physical or virtual
function) is unfortunately not very self contained. A lot of
state is subsystem-wide, where the subsystem is, roughly speaking,
the container for all controllers that shared storage. That is
the right thing to do for say dual ported SSDs that are used for
clustering or multi-pathing, for tentant isolation is it about
as wrong as it gets.
There is nothing in the NVMe spec that prohibits your from
implementing multiple subsystems for multiple functions of a PCIe
device, but if you do that there is absolutely no support in the
spec to manage shared resources or any other interaction between
them.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 15:22 ` Jason Gunthorpe
@ 2022-12-06 15:38 ` Christoph Hellwig
2022-12-06 15:51 ` Jason Gunthorpe
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 15:38 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 11:22:33AM -0400, Jason Gunthorpe wrote:
> > controlled functions (which could very well be, and in some designs
> > are, additional PFs and not VFs) by controlling function.
>
> In principle PF vs VF doesn't matter much - the question is really TLP
> labeling. If the spec says RID A is the controlling RID and RID B is
> the guest RID, then it doesn't matter if they have a PF/VF
> relationship or PF/PF relationship.
Yes. Or in fact if you use PASIDs inside a single function.
> We have locking issues in Linux SW connecting different SW drivers for
> things that are not a PF/VF relationship, but perhaps that can be
> solved.
And I think the only reasonable answer is that the entire workflow
must be 100% managed from the controlling function, and the controlled
function is just around for a ride, with the controlling function
enabling/disabling it as needed without ever interacting with software
that directly deals with the controlled function.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 15:38 ` Christoph Hellwig
@ 2022-12-06 15:51 ` Jason Gunthorpe
2022-12-06 16:55 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 15:51 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 04:38:11PM +0100, Christoph Hellwig wrote:
> > We have locking issues in Linux SW connecting different SW drivers for
> > things that are not a PF/VF relationship, but perhaps that can be
> > solved.
>
> And I think the only reasonable answer is that the entire workflow
> must be 100% managed from the controlling function, and the controlled
> function is just around for a ride, with the controlling function
> enabling/disabling it as needed without ever interacting with software
> that directly deals with the controlled function.
That is a big deviation from where VFIO is right now, the controlled
function is the one with the VFIO driver, it should be the one that
drives the migration uAPI components.
Adding another uAPI that can manipulate the same VFIO device from some
unrelated chardev feels wrong.
There are certain things that need to be co-ordinated for eveything to
work. Like you can't suspend the VFIO device unless you promise to
also stop MMIO operations. Stuff like FLR interfers with the migration
operation and has to be co-ordinated. Some migration operation
failures, like load failure, have to be healed through FLR.
It really does not want to be two different uAPIs even if that is
convenient for the kernel.
I'd much rather try to fix the problems PASID brings that try to make
this work :\
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 15:51 ` Jason Gunthorpe
@ 2022-12-06 16:55 ` Christoph Hellwig
2022-12-06 19:15 ` Jason Gunthorpe
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-06 16:55 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 11:51:23AM -0400, Jason Gunthorpe wrote:
> That is a big deviation from where VFIO is right now, the controlled
> function is the one with the VFIO driver, it should be the one that
> drives the migration uAPI components.
Well, that is one way to see it, but I think the more natural
way to deal with it is to drive everyting from the controlling
function, because that is by definition much more in control.
More importantly any sane design will have easy ways to list and
manipulate all the controlled functions from the controlling
functions, while getting from the controlled function to the
controlling one is extremely awkward, as anything that can be
used for that is by definition and information leak. It seems
mlx5 just gets away with that by saying controlled functions are
always VFs, and the controlling function is a PF, but that will
break down very easily, especially once you want to nest the
controlling scheme (and yes, I'm not making this up, as the
nesting scheme is being proposed for nvme privately).
^ permalink raw reply [flat|nested] 71+ messages in thread
* RE: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 15:35 ` Christoph Hellwig
@ 2022-12-06 18:00 ` Dong, Eddie
2022-12-12 7:57 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Dong, Eddie @ 2022-12-06 18:00 UTC (permalink / raw)
To: Christoph Hellwig, Jason Gunthorpe
Cc: Rao, Lei, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, Tian, Kevin, mjrosato,
linux-kernel, linux-nvme, kvm, Li, Yadong, Liu, Yi L, Wilk,
Konrad, stephen, Yuan, Hang
> -----Original Message-----
> From: Christoph Hellwig <hch@lst.de>
> Sent: Tuesday, December 6, 2022 7:36 AM
> To: Jason Gunthorpe <jgg@ziepe.ca>
> Cc: Christoph Hellwig <hch@lst.de>; Rao, Lei <Lei.Rao@intel.com>;
> kbusch@kernel.org; axboe@fb.com; kch@nvidia.com; sagi@grimberg.me;
> alex.williamson@redhat.com; cohuck@redhat.com; yishaih@nvidia.com;
> shameerali.kolothum.thodi@huawei.com; Tian, Kevin <kevin.tian@intel.com>;
> mjrosato@linux.ibm.com; linux-kernel@vger.kernel.org; linux-
> nvme@lists.infradead.org; kvm@vger.kernel.org; Dong, Eddie
> <eddie.dong@intel.com>; Li, Yadong <yadong.li@intel.com>; Liu, Yi L
> <yi.l.liu@intel.com>; Wilk, Konrad <konrad.wilk@oracle.com>;
> stephen@eideticom.com; Yuan, Hang <hang.yuan@intel.com>
> Subject: Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
>
> On Tue, Dec 06, 2022 at 11:28:12AM -0400, Jason Gunthorpe wrote:
> > I'm interested as well, my mental model goes as far as mlx5 and
> > hisillicon, so if nvme prevents the VFs from being contained units, it
> > is a really big deviation from VFIO's migration design..
>
> In NVMe the controller (which maps to a PCIe physical or virtual
> function) is unfortunately not very self contained. A lot of state is subsystem-
> wide, where the subsystem is, roughly speaking, the container for all
> controllers that shared storage. That is the right thing to do for say dual
> ported SSDs that are used for clustering or multi-pathing, for tentant isolation
> is it about as wrong as it gets.
NVMe spec is general, but the implementation details (such as internal state) may
be vendor specific. If the migration happens between 2 identical NVMe devices
(from same vendor/device w/ same firmware version), migration of
subsystem-wide state can be naturally covered, right?
>
> There is nothing in the NVMe spec that prohibits your from implementing
> multiple subsystems for multiple functions of a PCIe device, but if you do that
> there is absolutely no support in the spec to manage shared resources or any
> other interaction between them.
In IPU/DPU area, it seems multiple VFs with SR-IOV is widely adopted.
In VFs, the usage of shared resource can be viewed as implementation specific,
and load/save state of a VF can rely on the hardware/firmware itself.
Migration of NVMe devices crossing vendor/device is another story: it may
be useful, but brings additional challenges.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 16:55 ` Christoph Hellwig
@ 2022-12-06 19:15 ` Jason Gunthorpe
2022-12-07 2:30 ` Max Gurtovoy
2022-12-07 7:54 ` Christoph Hellwig
0 siblings, 2 replies; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-06 19:15 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 05:55:03PM +0100, Christoph Hellwig wrote:
> On Tue, Dec 06, 2022 at 11:51:23AM -0400, Jason Gunthorpe wrote:
> > That is a big deviation from where VFIO is right now, the controlled
> > function is the one with the VFIO driver, it should be the one that
> > drives the migration uAPI components.
>
> Well, that is one way to see it, but I think the more natural
> way to deal with it is to drive everyting from the controlling
> function, because that is by definition much more in control.
Sure, the controlling function should (and does in mlx5) drive
everything here.
What the kernel is doing is providing the abstraction to link the
controlling function to the VFIO device in a general way.
We don't want to just punt this problem to user space and say 'good
luck finding the right cdev for migration control'. If the kernel
struggles to link them then userspace will not fare better on its own.
Especially, we do not want every VFIO device to have its own crazy way
for userspace to link the controlling/controlled functions
together. This is something the kernel has to abstract away.
So, IMHO, we must assume the kernel is aware of the relationship,
whatever algorithm it uses to become aware.
It just means the issue is doing the necessary cross-subsystem
locking.
That combined with the fact they really are two halfs of the same
thing - operations on the controlling function have to be sequenced
with operations on the VFIO device - makes me prefer the single uAPI.
> More importantly any sane design will have easy ways to list and
> manipulate all the controlled functions from the controlling
> functions, while getting from the controlled function to the
> controlling one is extremely awkward, as anything that can be
> used for that is by definition and information leak.
We have spend some time looking at this for mlx5. It is a hard
problem. The VFIO driver cannot operate the device, eg it cannot do
MMIO and things, so it is limited to items in the PCI config space to
figure out the device identity.
> It seems mlx5 just gets away with that by saying controlled
> functions are always VFs, and the controlling function is a PF, but
> that will break down very easily,
Yes, that is part of the current mlx5 model. It is not inherent to the
device design, but the problems with arbitary nesting were hard enough
they were not tackled at this point.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 19:15 ` Jason Gunthorpe
@ 2022-12-07 2:30 ` Max Gurtovoy
2022-12-07 7:58 ` Christoph Hellwig
2022-12-07 7:54 ` Christoph Hellwig
1 sibling, 1 reply; 71+ messages in thread
From: Max Gurtovoy @ 2022-12-07 2:30 UTC (permalink / raw)
To: Jason Gunthorpe, Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On 12/6/2022 9:15 PM, Jason Gunthorpe wrote:
> On Tue, Dec 06, 2022 at 05:55:03PM +0100, Christoph Hellwig wrote:
>> On Tue, Dec 06, 2022 at 11:51:23AM -0400, Jason Gunthorpe wrote:
>>> That is a big deviation from where VFIO is right now, the controlled
>>> function is the one with the VFIO driver, it should be the one that
>>> drives the migration uAPI components.
>> Well, that is one way to see it, but I think the more natural
>> way to deal with it is to drive everyting from the controlling
>> function, because that is by definition much more in control.
> Sure, the controlling function should (and does in mlx5) drive
> everything here.
>
> What the kernel is doing is providing the abstraction to link the
> controlling function to the VFIO device in a general way.
>
> We don't want to just punt this problem to user space and say 'good
> luck finding the right cdev for migration control'. If the kernel
> struggles to link them then userspace will not fare better on its own.
>
> Especially, we do not want every VFIO device to have its own crazy way
> for userspace to link the controlling/controlled functions
> together. This is something the kernel has to abstract away.
>
> So, IMHO, we must assume the kernel is aware of the relationship,
> whatever algorithm it uses to become aware.
>
> It just means the issue is doing the necessary cross-subsystem
> locking.
Agree. This is not the first time we have cross-subsystem interactions
in the kernel, right ?
>
> That combined with the fact they really are two halfs of the same
> thing - operations on the controlling function have to be sequenced
> with operations on the VFIO device - makes me prefer the single uAPI.
>
>> More importantly any sane design will have easy ways to list and
>> manipulate all the controlled functions from the controlling
>> functions, while getting from the controlled function to the
>> controlling one is extremely awkward, as anything that can be
>> used for that is by definition and information leak.
> We have spend some time looking at this for mlx5. It is a hard
> problem. The VFIO driver cannot operate the device, eg it cannot do
> MMIO and things, so it is limited to items in the PCI config space to
> figure out the device identity.
Christoph,
I'm not sure how awkward is for migration driver to ask the controlling
device driver to operate a migration action.
The controlling device driver can expose limited API for that matter.
I don't see why is it wrong to submit some admin commands between
subsystems - we already have a way to send admin commands from linux cli
or from nvmet drivers to an NVMe device.
Also the concept of primary controller that control it's secondary
controllers is already in the SPEC so we can use it. It's not introduced
in this RFC but we're here to fix it.
In our case the primary controller is the PF and the secondary
controllers are the VFs.
If we'll think of a concept of new optional "Migration Management"
admin commands that will be supported by primary controllers to manage
the migration process of its secondary controllers - we can at least
solve the initial step of migrating VFs by its parent PF.
>
>> It seems mlx5 just gets away with that by saying controlled
>> functions are always VFs, and the controlling function is a PF, but
>> that will break down very easily,
> Yes, that is part of the current mlx5 model. It is not inherent to the
> device design, but the problems with arbitary nesting were hard enough
> they were not tackled at this point.
Agree. There are a lot of challenges in the non-nested migration that we
can just limit the NVMe SPEC to it and extend later on - like we did in
other features such as copy-Offload.
Most of the infrastructure work for LM was done in the VFIO subsystem in
the last year so we can now focus on the Architecture aspects of NVMe.
>
> Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-06 19:15 ` Jason Gunthorpe
2022-12-07 2:30 ` Max Gurtovoy
@ 2022-12-07 7:54 ` Christoph Hellwig
2022-12-07 10:59 ` Max Gurtovoy
2022-12-07 13:34 ` Jason Gunthorpe
1 sibling, 2 replies; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-07 7:54 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 06, 2022 at 03:15:41PM -0400, Jason Gunthorpe wrote:
> What the kernel is doing is providing the abstraction to link the
> controlling function to the VFIO device in a general way.
>
> We don't want to just punt this problem to user space and say 'good
> luck finding the right cdev for migration control'. If the kernel
> struggles to link them then userspace will not fare better on its own.
Yes. But the right interface for that is to issue the userspace
commands for anything that is not normal PCIe function level
to the controlling funtion, and to discover the controlled functions
based on the controlling functions.
In other words: there should be absolutely no need to have any
special kernel support for the controlled function. Instead the
controlling function enumerates all the function it controls exports
that to userspace and exposes the functionality to save state from
and restore state to the controlled functions.
> Especially, we do not want every VFIO device to have its own crazy way
> for userspace to link the controlling/controlled functions
> together. This is something the kernel has to abstract away.
Yes. But the direction must go controlling to controlled, not the
other way around.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 2:30 ` Max Gurtovoy
@ 2022-12-07 7:58 ` Christoph Hellwig
2022-12-09 2:11 ` Tian, Kevin
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-07 7:58 UTC (permalink / raw)
To: Max Gurtovoy
Cc: Jason Gunthorpe, Christoph Hellwig, Lei Rao, kbusch, axboe, kch,
sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, kevin.tian, mjrosato, linux-kernel,
linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu, Konrad.wilk,
stephen, hang.yuan
On Wed, Dec 07, 2022 at 04:30:20AM +0200, Max Gurtovoy wrote:
> I'm not sure how awkward is for migration driver to ask the controlling
> device driver to operate a migration action.
It can't. That's the whole point. The controlled function that is
being migrate must be absolutely unaware of that (except for things
like quiescing access or FLRs that could happen anyway), because
otherwise your have a fundamental information leak.
> The controlling device driver can expose limited API for that matter.
No, it can't. It must be in charge.
> Also the concept of primary controller that control it's secondary
> controllers is already in the SPEC so we can use it. It's not introduced in
> this RFC but we're here to fix it.
Yes, it is as I've pointed out multiple times. But, that relationship
is only visible to the primary controller. It also doesn't help with
the general problem where the secondary controller must be able to
completely change it's identify and thus the subsystem.
> In our case the primary controller is the PF and the secondary controllers
> are the VFs.
Yes, that's your case, and probably a very common one. But also far from
the only one, so there is no way Linux or the specification can rely
on that dumb fact. Never mind that there are virtualization schemes
(look at the s390 code) where the PF to VF relationship gets lost.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 7:54 ` Christoph Hellwig
@ 2022-12-07 10:59 ` Max Gurtovoy
2022-12-07 13:46 ` Christoph Hellwig
2022-12-07 13:34 ` Jason Gunthorpe
1 sibling, 1 reply; 71+ messages in thread
From: Max Gurtovoy @ 2022-12-07 10:59 UTC (permalink / raw)
To: Christoph Hellwig, Jason Gunthorpe
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On 12/7/2022 9:54 AM, Christoph Hellwig wrote:
> On Tue, Dec 06, 2022 at 03:15:41PM -0400, Jason Gunthorpe wrote:
>> What the kernel is doing is providing the abstraction to link the
>> controlling function to the VFIO device in a general way.
>>
>> We don't want to just punt this problem to user space and say 'good
>> luck finding the right cdev for migration control'. If the kernel
>> struggles to link them then userspace will not fare better on its own.
> Yes. But the right interface for that is to issue the userspace
> commands for anything that is not normal PCIe function level
> to the controlling funtion, and to discover the controlled functions
> based on the controlling functions.
>
> In other words: there should be absolutely no need to have any
> special kernel support for the controlled function. Instead the
> controlling function enumerates all the function it controls exports
> that to userspace and exposes the functionality to save state from
> and restore state to the controlled functions.
Why is it preferred that the migration SW will talk directly to the PF
and not via VFIO interface ?
It's just an implementation detail.
I feel like it's even sounds more reasonable to have a common API like
we have today to save_state/resume_state/quiesce_device/freeze_device
and each device implementation will translate this functionality to its
own SPEC.
If I understand your direction is to have QEMU code to talk to
nvmecli/new_mlx5cli/my_device_cli to do that and I'm not sure it's needed.
The controlled device is not aware of any of the migration process. Only
the migration SW, system admin and controlling device.
I see 2 orthogonal discussions here: NVMe standardization for LM and
Linux implementation for LM.
For the NVMe standardization: I think we all agree, in high level, that
primary controller manages the LM of the secondary controllers. Primary
controller can list the secondary controllers. Primary controller expose
APIs using its admin_queue to manage LM process of its secondary
controllers. LM Capabilities will be exposed using identify_ctrl admin
cmd of the primary controller.
For the Linux implementation: the direction we started last year is to
have vendor specific (mlx5/hisi/..) or protocol specific
(nvme/virtio/..) vfio drivers. We built an infrastructure to do that by
dividing the vfio_pci driver to vfio_pci and vfio_pci_core and updated
uAPIs as well to support the P2P case for live migration. Dirty page
tracking is also progressing. More work is still to be done to improve
this infrastructure for sure.
I hope that all the above efforts are going to be used also with NVMe LM
implementation unless there is something NVMe specific in the way of
migrating PCI functions that I can't see now.
If there is something that is NVMe specific for LM then the migration SW
and QEMU will need to be aware of that, and in this awareness we lose
the benefit of generic VFIO interface.
>
>> Especially, we do not want every VFIO device to have its own crazy way
>> for userspace to link the controlling/controlled functions
>> together. This is something the kernel has to abstract away.
> Yes. But the direction must go controlling to controlled, not the
> other way around.
So in the source:
1. We enable SRIOV on the NVMe driver
2. We list all the secondary controllers: nvme1, nvme2, nvme3
3. We allow migrating nvme1, nvme2, nvme3 - now these VFs are migratable
(controlling to controlled).
4. We bind nvme1, nvme2, nvme3 to VFIO NVMe driver
5. We pass these functions to VM
6. We start migration process.
And in the destination:
1. We enable SRIOV on the NVMe driver
2. We list all the secondary controllers: nvme1, nvme2, nvme3
3. We allow migration resume to nvme1, nvme2, nvme3 - now these VFs are
resumable (controlling to controlled).
4. We bind nvme1, nvme2, nvme3 to VFIO NVMe driver
5. We pass these functions to VM
6. We start migration resume process.
>
>
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 7:54 ` Christoph Hellwig
2022-12-07 10:59 ` Max Gurtovoy
@ 2022-12-07 13:34 ` Jason Gunthorpe
2022-12-07 13:52 ` Christoph Hellwig
1 sibling, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-07 13:34 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Wed, Dec 07, 2022 at 08:54:15AM +0100, Christoph Hellwig wrote:
> On Tue, Dec 06, 2022 at 03:15:41PM -0400, Jason Gunthorpe wrote:
> > What the kernel is doing is providing the abstraction to link the
> > controlling function to the VFIO device in a general way.
> >
> > We don't want to just punt this problem to user space and say 'good
> > luck finding the right cdev for migration control'. If the kernel
> > struggles to link them then userspace will not fare better on its own.
>
> Yes. But the right interface for that is to issue the userspace
> commands for anything that is not normal PCIe function level
> to the controlling funtion, and to discover the controlled functions
> based on the controlling functions.
I don't think we should mix up how the HW works, what PCI function the
commands are executed at, with how the uAPI is designed.
The VFIO design assumes that the "vfio migration driver" will talk to
both functions under the hood, and I don't see a fundamental problem
with this beyond it being awkward with the driver core.
It is done this way deliberately. When we did the work on it we found
there are problems with some device models, like when you suspend them
and then wrongly MMIO touch them they can trigger AER and maybe even a
machine check crash. One of the roles of the VFIO driver is to fix
these HW bugs and make the uAPI safe. Eg by revoking mmaps or
whatever.
Even more importantly, we do not want migration to ever be operated
unless VFIO is in control of the device. In general, migration resume
basically allows userspace to command the device to do effectively any
DMA. This is a kernel security problem if the device is not
constrained by a user iommu_domain - for security we must not allow
userspace to resume a VF that is under kernel control and potentially
linked to an passthrough iommu_domain.
VFIO provides the security model to make all of this safe - the two
concepts cannot become disconnected. Even if we create a new migration
uAPI it just means that the nvme driver has to be awkwardly aware of
VFIO VF drivers and interlock with their state, and the uAPI is
useless unless you already have a VFIO FD open.
Even the basic assumption that there would be a controlling/controlled
relationship is not universally true. The mdev type drivers, and
SIOV-like devices are unlikely to have that. Once you can use PASID
the reasons to split things at the HW level go away, and a VF could
certainly self-migrate.
VFIO's goal is to abstract all of the above stuff. You get one char
device that inherently provides the security guarentees required to
operate migration. It provides all the necessary hooks to fix up HW
issues, which so far every merged device has:
- mlx5 has a weird issue where FLR on the VF resets the migration
context, we fix that in the VFIO driver (in mlx5 even though the
commands are issued via the PF they are logically executed inside
the VF context)
- hi-silicon has security problems because it doesn't have
controlling/controlled, so it needs to carve out BAR MMIO maps and
other stuff
So while I agree that, in principle, migration and the VFIO VF are
seperate concerns our broken reality makes them linked.
Even the idea that started this thread - that PF/PF could be a problem
- seems to have been explored by the Pensando RFC which is using the
aux devices to connect arbitrary PF/PF for their model.
The logical model we have been using on complex multi-function devices
(like every DPU driver) has been to split the driver into subsystem
local code and thread all the pieces together with aux devices.
The model has a PCI driver that operates the lowest level of the
device, eg the 'admin queue' and then aux devices create
subsystem-local drivers (netdev, rdma, vdpa, iscsi, vfio, etc, etc)
that ride on the common API exported by the PCI driver.
So, when you see both Intel and Pensando proposing this kind of
layered model for NVMe where migration is subsystem-local to VFIO, I
think this is where the inspiration is coming from. Their native DPU
drivers already work this way.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 10:59 ` Max Gurtovoy
@ 2022-12-07 13:46 ` Christoph Hellwig
2022-12-07 14:50 ` Max Gurtovoy
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-07 13:46 UTC (permalink / raw)
To: Max Gurtovoy
Cc: Christoph Hellwig, Jason Gunthorpe, Lei Rao, kbusch, axboe, kch,
sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, kevin.tian, mjrosato, linux-kernel,
linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu, Konrad.wilk,
stephen, hang.yuan
On Wed, Dec 07, 2022 at 12:59:00PM +0200, Max Gurtovoy wrote:
> Why is it preferred that the migration SW will talk directly to the PF and
> not via VFIO interface ?
It should never talk directly to any hardware, but through a kernel
interface, and that's probably vfio. But that interface needs to
centered around the controlling function for all the reasons I've
written down multiple times now.
> It's just an implementation detail.
No, it's not. While you could come up with awkward ways to map how
the hardware interface must work to a completely contrary kernel
interface that's just going to create the need for lots of boilerplate
code _and_ confuses users. The function that is beeing migrated can
fundamentally not be in control of itself. Any interface that pretends
it is broken and a long term nightmare for users and implementers.
> I feel like it's even sounds more reasonable to have a common API like we
> have today to save_state/resume_state/quiesce_device/freeze_device and each
> device implementation will translate this functionality to its own SPEC.
Absolutely.
> If I understand your direction is to have QEMU code to talk to
> nvmecli/new_mlx5cli/my_device_cli to do that and I'm not sure it's needed.
No.
> The controlled device is not aware of any of the migration process. Only
> the migration SW, system admin and controlling device.
Exactly.
> So in the source:
>
> 1. We enable SRIOV on the NVMe driver
Again. Nothing in live migration is tied to SR-IOV at all. SR-IOV
is just one way to get multiple functions.
> 2. We list all the secondary controllers: nvme1, nvme2, nvme3
>
> 3. We allow migrating nvme1, nvme2, nvme3 - now these VFs are migratable
> (controlling to controlled).
>
> 4. We bind nvme1, nvme2, nvme3 to VFIO NVMe driver
>
> 5. We pass these functions to VM
And you need to pass the controlling function (or rather a handle for
it), because there is absolutely no sane way to discover that from
the controlled function as it can't have that information by the
fact that it is beeing passed to unprivilged VMs.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 13:34 ` Jason Gunthorpe
@ 2022-12-07 13:52 ` Christoph Hellwig
2022-12-07 15:07 ` Jason Gunthorpe
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-07 13:52 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Wed, Dec 07, 2022 at 09:34:14AM -0400, Jason Gunthorpe wrote:
> The VFIO design assumes that the "vfio migration driver" will talk to
> both functions under the hood, and I don't see a fundamental problem
> with this beyond it being awkward with the driver core.
And while that is a fine concept per see, the current incarnation of
that is fundamentally broken is it centered around the controlled
VM. Which really can't work.
> Even the basic assumption that there would be a controlling/controlled
> relationship is not universally true. The mdev type drivers, and
> SIOV-like devices are unlikely to have that. Once you can use PASID
> the reasons to split things at the HW level go away, and a VF could
> certainly self-migrate.
Even then you need a controlling and a controlled entity. The
controlling entity even in SIOV remains a PCIe function. The
controlled entity might just be a bunch of hardware resoures and
a PASID. Making it important again that all migration is driven
by the controlling entity.
Also the whole concept that only VFIO can do live migration is
a little bogus. With checkpoint and restart it absolutely
does make sense to live migrate a container, and with that
the hardware interface (e.g. nvme controller) assigned to it.
> So, when you see both Intel and Pensando proposing this kind of
> layered model for NVMe where migration is subsystem-local to VFIO, I
> think this is where the inspiration is coming from. Their native DPU
> drivers already work this way.
Maybe they should have talked to someone not high on their own
supply before designing this.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 13:46 ` Christoph Hellwig
@ 2022-12-07 14:50 ` Max Gurtovoy
2022-12-07 16:35 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Max Gurtovoy @ 2022-12-07 14:50 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Jason Gunthorpe, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On 12/7/2022 3:46 PM, Christoph Hellwig wrote:
> On Wed, Dec 07, 2022 at 12:59:00PM +0200, Max Gurtovoy wrote:
>> Why is it preferred that the migration SW will talk directly to the PF and
>> not via VFIO interface ?
> It should never talk directly to any hardware, but through a kernel
> interface, and that's probably vfio. But that interface needs to
> centered around the controlling function for all the reasons I've
> written down multiple times now.
>
>> It's just an implementation detail.
> No, it's not. While you could come up with awkward ways to map how
> the hardware interface must work to a completely contrary kernel
> interface that's just going to create the need for lots of boilerplate
> code _and_ confuses users. The function that is beeing migrated can
> fundamentally not be in control of itself. Any interface that pretends
> it is broken and a long term nightmare for users and implementers.
We're defining the SPEC and interfaces now :)
Bellow is some possible direction I can think of.
>> I feel like it's even sounds more reasonable to have a common API like we
>> have today to save_state/resume_state/quiesce_device/freeze_device and each
>> device implementation will translate this functionality to its own SPEC.
> Absolutely.
>
>> If I understand your direction is to have QEMU code to talk to
>> nvmecli/new_mlx5cli/my_device_cli to do that and I'm not sure it's needed.
> No.
great.
>
>> The controlled device is not aware of any of the migration process. Only
>> the migration SW, system admin and controlling device.
> Exactly.
>
>> So in the source:
>>
>> 1. We enable SRIOV on the NVMe driver
> Again. Nothing in live migration is tied to SR-IOV at all. SR-IOV
> is just one way to get multiple functions.
Sure.
It's just an example. It can be some mdev.
>
>> 2. We list all the secondary controllers: nvme1, nvme2, nvme3
>>
>> 3. We allow migrating nvme1, nvme2, nvme3 - now these VFs are migratable
>> (controlling to controlled).
>>
>> 4. We bind nvme1, nvme2, nvme3 to VFIO NVMe driver
>>
>> 5. We pass these functions to VM
> And you need to pass the controlling function (or rather a handle for
> it), because there is absolutely no sane way to discover that from
> the controlled function as it can't have that information by the
> fact that it is beeing passed to unprivilged VMs.
Just thinking out loud:
When we perform step #3 we are narrowing it's scope and maybe some caps
that you're concerned of. After this setting, the controlled function is
in LM mode (we should define what does that mean in order to be able to
migrate it correctly) and the controlling function is the migration
master of it. Both can be aware of that. The only one that can master
the controlled function is the controlling function in LM mode. Thus, it
will be easy to keep that handle inside the kernel for VFs and for MDEVs
as well.
Although I'm not against passing this handle to migration SW somehow in
the command line of the QEMU but I still can't completely agree it's
necessary.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 13:52 ` Christoph Hellwig
@ 2022-12-07 15:07 ` Jason Gunthorpe
2022-12-07 16:38 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-07 15:07 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Wed, Dec 07, 2022 at 02:52:03PM +0100, Christoph Hellwig wrote:
> On Wed, Dec 07, 2022 at 09:34:14AM -0400, Jason Gunthorpe wrote:
> > The VFIO design assumes that the "vfio migration driver" will talk to
> > both functions under the hood, and I don't see a fundamental problem
> > with this beyond it being awkward with the driver core.
>
> And while that is a fine concept per see, the current incarnation of
> that is fundamentally broken is it centered around the controlled
> VM. Which really can't work.
I don't see why you keep saying this. It is centered around the struct
vfio_device object in the kernel, which is definately NOT the VM.
The struct vfio_device is the handle for the hypervisor to control
the physical assigned device - and it is the hypervisor that controls
the migration.
We do not need the hypervisor userspace to have a handle to the hidden
controlling function. It provides no additional functionality,
security or insight to what qemu needs to do. Keeping that
relationship abstracted inside the kernel is a reasonable choice and
is not "fundamentally broken".
> > Even the basic assumption that there would be a controlling/controlled
> > relationship is not universally true. The mdev type drivers, and
> > SIOV-like devices are unlikely to have that. Once you can use PASID
> > the reasons to split things at the HW level go away, and a VF could
> > certainly self-migrate.
>
> Even then you need a controlling and a controlled entity. The
> controlling entity even in SIOV remains a PCIe function. The
> controlled entity might just be a bunch of hardware resoures and
> a PASID. Making it important again that all migration is driven
> by the controlling entity.
If they are the same driver implementing vfio_device you may be able
to claim they conceptually exist, but it is pretty artificial to draw
this kind of distinction inside a single driver.
> Also the whole concept that only VFIO can do live migration is
> a little bogus. With checkpoint and restart it absolutely
> does make sense to live migrate a container, and with that
> the hardware interface (e.g. nvme controller) assigned to it.
I agree people may want to do this, but it is very unclear how SRIOV
live migration can help do this.
SRIOV live migration is all about not disturbing the kernel driver,
assuming it is the same kernel driver on both sides. If you have two
different kernel's there is nothing worth migrating. There isn't even
an assurance the dma API will have IOMMU mapped the same objects to
the same IOVAs. eg so you have re-establish your admin queue, IO
queues, etc after migration anyhow.
Let alone how to solve the security problems of allow userspace to
load arbitary FW blobs into a device with potentially insecure DMA
access..
At that point it isn't really the same kind of migration.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 14:50 ` Max Gurtovoy
@ 2022-12-07 16:35 ` Christoph Hellwig
0 siblings, 0 replies; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-07 16:35 UTC (permalink / raw)
To: Max Gurtovoy
Cc: Christoph Hellwig, Jason Gunthorpe, Lei Rao, kbusch, axboe, kch,
sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, kevin.tian, mjrosato, linux-kernel,
linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu, Konrad.wilk,
stephen, hang.yuan
On Wed, Dec 07, 2022 at 04:50:00PM +0200, Max Gurtovoy wrote:
> When we perform step #3 we are narrowing it's scope and maybe some caps
> that you're concerned of. After this setting, the controlled function is in
> LM mode (we should define what does that mean in order to be able to
> migrate it correctly) and the controlling function is the migration master
> of it. Both can be aware of that. The only one that can master the
> controlled function is the controlling function in LM mode. Thus, it will
> be easy to keep that handle inside the kernel for VFs and for MDEVs as
> well.
Maybe. So you'd introduce a kernel linkage that both side would have
to be part of?
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 15:07 ` Jason Gunthorpe
@ 2022-12-07 16:38 ` Christoph Hellwig
2022-12-07 17:31 ` Jason Gunthorpe
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-07 16:38 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Wed, Dec 07, 2022 at 11:07:11AM -0400, Jason Gunthorpe wrote:
> > And while that is a fine concept per see, the current incarnation of
> > that is fundamentally broken is it centered around the controlled
> > VM. Which really can't work.
>
> I don't see why you keep saying this. It is centered around the struct
> vfio_device object in the kernel, which is definately NOT the VM.
Sorry, I meant VF. Your continued using of SR-IOV teminology now keeps
confusing my mind so much that I start mistyping things.
> > Even then you need a controlling and a controlled entity. The
> > controlling entity even in SIOV remains a PCIe function. The
> > controlled entity might just be a bunch of hardware resoures and
> > a PASID. Making it important again that all migration is driven
> > by the controlling entity.
>
> If they are the same driver implementing vfio_device you may be able
> to claim they conceptually exist, but it is pretty artificial to draw
> this kind of distinction inside a single driver.
How are they in this reply? I can't parse how this even relates to
what I wrote.
> > Also the whole concept that only VFIO can do live migration is
> > a little bogus. With checkpoint and restart it absolutely
> > does make sense to live migrate a container, and with that
> > the hardware interface (e.g. nvme controller) assigned to it.
>
> I agree people may want to do this, but it is very unclear how SRIOV
> live migration can help do this.
SRIOV live migration doesn't, because honestly there is no such
thing as "SRIOV" live migration to start with.
> Let alone how to solve the security problems of allow userspace to
> load arbitary FW blobs into a device with potentially insecure DMA
> access..
Any time you assign a PCI device to userspace you might get into that.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 16:38 ` Christoph Hellwig
@ 2022-12-07 17:31 ` Jason Gunthorpe
2022-12-07 18:33 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-07 17:31 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Wed, Dec 07, 2022 at 05:38:57PM +0100, Christoph Hellwig wrote:
> On Wed, Dec 07, 2022 at 11:07:11AM -0400, Jason Gunthorpe wrote:
> > > And while that is a fine concept per see, the current incarnation of
> > > that is fundamentally broken is it centered around the controlled
> > > VM. Which really can't work.
> >
> > I don't see why you keep saying this. It is centered around the struct
> > vfio_device object in the kernel, which is definately NOT the VM.
>
> Sorry, I meant VF. Your continued using of SR-IOV teminology now keeps
> confusing my mind so much that I start mistyping things.
Well, what words do you want to use?
Regardless of VF/VM, it doesn't matter - my point is that the
vfio_device is the hypervisor control for *whatever* is under the
vfio_device and it is not desirable to break it up along arbitrary HW
boundaries.
I've given lots of reasons why not to do this now.
I strongly suspect it can work technically - as ugly as it is Pensando
shows an approach.
So I don't think I've learned anything more about your objection.
"fundamentally broken" doesn't help
It is a major point, because if we are going to have to rip apart all
the uAPI we built here and are completing the qemu work for, we need
to come to an understanding very soon.
And given how difficult it has been to get to this point, I want a
*really* good reason why we have to start again, and rewrite all the
drivers that exist and are coming.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 17:31 ` Jason Gunthorpe
@ 2022-12-07 18:33 ` Christoph Hellwig
2022-12-07 20:08 ` Jason Gunthorpe
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-07 18:33 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Wed, Dec 07, 2022 at 01:31:44PM -0400, Jason Gunthorpe wrote:
> > Sorry, I meant VF. Your continued using of SR-IOV teminology now keeps
> > confusing my mind so much that I start mistyping things.
>
> Well, what words do you want to use?
The same I've used through this whole thread: controlling and
controlled function.
> So I don't think I've learned anything more about your objection.
>
> "fundamentally broken" doesn't help
The objection is that:
- in hardware fundamentally only the controlling funtion can
control live migration features on the controlled function,
because the controlled function is assigned to a VM which has
control over it.
- for the same reason there is no portable way to even find
the controlling function from a controlled function, unless
you want to equate PF = controlling and VF = controlled,
and even that breaks down in some corner cases
- if you want to control live migration from the controlled
VM you need a new vfio subdriver for a function that has
absolutely no new functionality itself related to live
migration (quirks for bugs excepted).
So by this architecture you build a convoluted mess where you
need tons of vfio subdrivers that mostly just talk to the
driver for the controlling function, which they can't even
sanely discover. That's what I keep calling fundamentally
broken.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 18:33 ` Christoph Hellwig
@ 2022-12-07 20:08 ` Jason Gunthorpe
2022-12-09 2:50 ` Tian, Kevin
` (2 more replies)
0 siblings, 3 replies; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-07 20:08 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Wed, Dec 07, 2022 at 07:33:33PM +0100, Christoph Hellwig wrote:
> On Wed, Dec 07, 2022 at 01:31:44PM -0400, Jason Gunthorpe wrote:
> > > Sorry, I meant VF. Your continued using of SR-IOV teminology now keeps
> > > confusing my mind so much that I start mistyping things.
> >
> > Well, what words do you want to use?
>
> The same I've used through this whole thread: controlling and
> controlled function.
>
> > So I don't think I've learned anything more about your objection.
> >
> > "fundamentally broken" doesn't help
>
> The objection is that:
>
> - in hardware fundamentally only the controlling funtion can
> control live migration features on the controlled function,
> because the controlled function is assigned to a VM which has
> control over it.
Yes
However hisilicon managed to do their implementation without this, or
rather you could say their "controlling function" is a single MMIO BAR
page in their PCI VF and their "controlled function" is the rest of
the PCI VF.
> - for the same reason there is no portable way to even find
> the controlling function from a controlled function, unless
> you want to equate PF = controlling and VF = controlled,
> and even that breaks down in some corner cases
As you say, the kernel must know the relationship between
controlling->controlled. Nothing else is sane.
If the kernel knows this information then we can find a way for the
vfio_device to have pointers to both controlling and controlled
objects. I have a suggestion below.
> - if you want to control live migration from the controlled
> VM you need a new vfio subdriver for a function that has
> absolutely no new functionality itself related to live
> migration (quirks for bugs excepted).
I see it differently, the VFIO driver *is* the live migration
driver. Look at all the drivers that have come through and they are
99% live migration code. They have, IMHO, properly split the live
migration concern out of their controlling/PF driver and placed it in
the "VFIO live migration driver".
We've done a pretty good job of allowing the VFIO live migration
driver to pretty much just focus on live migration stuff and delegate
the VFIO part to library code.
Excepting quirks and bugs sounds nice, except we actually can't ignore
them. Having all the VFIO capabilities is exactly how we are fixing
the quirks and bugs in the first place, and I don't see your vision
how we can continue to do that if we split all the live migration code
into yet another subsystem.
For instance how do I trap FLR like mlx5 must do if the
drivers/live_migration code cannot intercept the FLR VFIO ioctl?
How do I mangle and share the BAR like hisilicon does?
Which is really why this is in VFIO in the first place. It actually is
coupled in practice, if not in theory.
> So by this architecture you build a convoluted mess where you need
> tons of vfio subdrivers that mostly just talk to the driver for the
> controlling function, which they can't even sanely discover. That's
> what I keep calling fundamentally broken.
The VFIO live migration drivers will look basically the same if you
put them under drivers/live_migration. This cannot be considered a
"convoluted mess" as splitting things by subsystem is best-practice,
AFAIK.
If we accept that drivers/vfio can be the "live migration subsystem"
then lets go all the way and have the controlling driver to call
vfio_device_group_register() to create the VFIO char device for the
controlled function.
This solves the "sanely discover" problem because of course the
controlling function driver knows what the controlled function is and
it can acquire both functions before it calls
vfio_device_group_register().
This is actually what I want to do anyhow for SIOV-like functions and
VFIO. Doing it for PCI VFs (or related PFs) is very nice symmetry. I
really dislike that our current SRIOV model in Linux forces the VF to
instantly exist without a chance for the controlling driver to
provision it.
We have some challenges on how to do this in the kernel, but I think
we can overcome them. VFIO is ready for this thanks to all the
restructuring work we already did.
I'd really like to get away from VFIO having to do all this crazy
sysfs crap to activate its driver. I think there is a lot of appeal to
having, say, a nvmecli command that just commands the controlling
driver to provision a function, enable live migration, configure it
and then make it visible via VFIO. The same API regardless if the
underlying controlled function technology is PF/VF/SIOV.
At least we have been very interested in doing that for networking
devices.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 5:58 ` [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device Lei Rao
2022-12-06 6:26 ` Christoph Hellwig
@ 2022-12-07 22:42 ` Jonathan Derrick
2022-12-07 22:54 ` Chaitanya Kulkarni
1 sibling, 1 reply; 71+ messages in thread
From: Jonathan Derrick @ 2022-12-07 22:42 UTC (permalink / raw)
To: linux-nvme
On 12/5/2022 10:58 PM, Lei Rao wrote:
> The documentation describes the details of the NVMe hardware
> extension to support VFIO live migration.
>
> Signed-off-by: Lei Rao <lei.rao@intel.com>
> Signed-off-by: Yadong Li <yadong.li@intel.com>
> Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
> Reviewed-by: Eddie Dong <eddie.dong@intel.com>
> Reviewed-by: Hang Yuan <hang.yuan@intel.com>
> ---
> drivers/vfio/pci/nvme/nvme.txt | 278 +++++++++++++++++++++++++++++++++
> 1 file changed, 278 insertions(+)
> create mode 100644 drivers/vfio/pci/nvme/nvme.txt
>
> diff --git a/drivers/vfio/pci/nvme/nvme.txt b/drivers/vfio/pci/nvme/nvme.txt
> new file mode 100644
> index 000000000000..eadcf2082eed
> --- /dev/null
> +++ b/drivers/vfio/pci/nvme/nvme.txt
> @@ -0,0 +1,278 @@
> +===========================
> +NVMe Live Migration Support
> +===========================
> +
> +Introduction
> +------------
> +To support live migration, NVMe device designs its own implementation,
> +including five new specific admin commands and a capability flag in
> +the vendor-specific field in the identify controller data structure to
> +support VF's live migration usage. Software can use these live migration
> +admin commands to get device migration state data size, save and load the
> +data, suspend and resume the given VF device. They are submitted by software
> +to the NVMe PF device's admin queue and ignored if placed in the VF device's
> +admin queue. This is due to the NVMe VF device being passed to the virtual
> +machine in the virtualization scenario. So VF device's admin queue is not
> +available for the hypervisor to submit VF device live migration commands.
> +The capability flag in the identify controller data structure can be used by
> +software to detect if the NVMe device supports live migration. The following
> +chapters introduce the detailed format of the commands and the capability flag.
> +
> +Definition of opcode for live migration commands
> +------------------------------------------------
> +
> ++---------------------------+-----------+-----------+------------+
> +| | | | |
> +| Opcode by Field | | | |
> +| | | | |
> ++--------+---------+--------+ | | |
> +| | | | Combined | Namespace | |
> +| 07 | 06:02 | 01:00 | Opcode | Identifier| Command |
> +| | | | | used | |
> ++--------+---------+--------+ | | |
> +|Generic | Function| Data | | | |
> +|command | |Transfer| | | |
> ++--------+---------+--------+-----------+-----------+------------+
> +| |
> +| Vendor SpecificOpcode |
> ++--------+---------+--------+-----------+-----------+------------+
> +| | | | | | Query the |
> +| 1b | 10001 | 00 | 0xC4 | | data size |
> ++--------+---------+--------+-----------+-----------+------------+
> +| | | | | | Suspend the|
> +| 1b | 10010 | 00 | 0xC8 | | VF |
> ++--------+---------+--------+-----------+-----------+------------+
> +| | | | | | Resume the |
> +| 1b | 10011 | 00 | 0xCC | | VF |
> ++--------+---------+--------+-----------+-----------+------------+
> +| | | | | | Save the |
> +| 1b | 10100 | 10 | 0xD2 | |device data |
> ++--------+---------+--------+-----------+-----------+------------+
> +| | | | | | Load the |
> +| 1b | 10101 | 01 | 0xD5 | |device data |
> ++--------+---------+--------+-----------+-----------+------------+
> +
I'm assuming by using these vendor specific opcodes and id-ctrl's vu space, that
you should make this code be protected by some kind of vendor/device specific-flag
or preferably something standard.
No way of knowing what 0xC4 will do on a non-lm drive, for instance
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-07 22:42 ` Jonathan Derrick
@ 2022-12-07 22:54 ` Chaitanya Kulkarni
2022-12-08 0:03 ` Keith Busch
0 siblings, 1 reply; 71+ messages in thread
From: Chaitanya Kulkarni @ 2022-12-07 22:54 UTC (permalink / raw)
To: Jonathan Derrick, linux-nvme
Jonathan,
>> ++---------------------------+-----------+-----------+------------+
>> +| | | | |
>> +| Opcode by Field | | | |
>> +| | | | |
>> ++--------+---------+--------+ | | |
>> +| | | | Combined | Namespace | |
>> +| 07 | 06:02 | 01:00 | Opcode | Identifier| Command |
>> +| | | | | used | |
>> ++--------+---------+--------+ | | |
>> +|Generic | Function| Data | | | |
>> +|command | |Transfer| | | |
>> ++--------+---------+--------+-----------+-----------+------------+
>> +| |
>> +| Vendor SpecificOpcode |
>> ++--------+---------+--------+-----------+-----------+------------+
>> +| | | | | | Query the |
>> +| 1b | 10001 | 00 | 0xC4 | | data size |
>> ++--------+---------+--------+-----------+-----------+------------+
>> +| | | | | | Suspend the|
>> +| 1b | 10010 | 00 | 0xC8 | | VF |
>> ++--------+---------+--------+-----------+-----------+------------+
>> +| | | | | | Resume the |
>> +| 1b | 10011 | 00 | 0xCC | | VF |
>> ++--------+---------+--------+-----------+-----------+------------+
>> +| | | | | | Save the |
>> +| 1b | 10100 | 10 | 0xD2 | |device data |
>> ++--------+---------+--------+-----------+-----------+------------+
>> +| | | | | | Load the |
>> +| 1b | 10101 | 01 | 0xD5 | |device data |
>> ++--------+---------+--------+-----------+-----------+------------+
>> +
> I'm assuming by using these vendor specific opcodes and id-ctrl's vu space, that
> you should make this code be protected by some kind of vendor/device specific-flag
> or preferably something standard.
>
> No way of knowing what 0xC4 will do on a non-lm drive, for instance
>
This is only reference implementation. The process of the
standardization of the NVMe Live Migration is will take of these
opcodes and anything Vendor specific present in this series.
It is very important to get some feedback on this to help the
standardization in any way.
-ck
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-07 22:54 ` Chaitanya Kulkarni
@ 2022-12-08 0:03 ` Keith Busch
2022-12-08 5:39 ` Chaitanya Kulkarni
0 siblings, 1 reply; 71+ messages in thread
From: Keith Busch @ 2022-12-08 0:03 UTC (permalink / raw)
To: Chaitanya Kulkarni; +Cc: Jonathan Derrick, linux-nvme
On Wed, Dec 07, 2022 at 10:54:25PM +0000, Chaitanya Kulkarni wrote:
> This is only reference implementation. The process of the
> standardization of the NVMe Live Migration is will take of these
> opcodes and anything Vendor specific present in this series.
>
> It is very important to get some feedback on this to help the
> standardization in any way.
We have the NVMe TWG, and live-migration is already active with TPAR4195. Why
is anyone thinking a Linux mailing list is the appropriate forum to discuss
standardizing an OS agnositic feature at this point? Your vfio APIs and vendor
specific hijacks are premature implementation details at this point.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-08 0:03 ` Keith Busch
@ 2022-12-08 5:39 ` Chaitanya Kulkarni
0 siblings, 0 replies; 71+ messages in thread
From: Chaitanya Kulkarni @ 2022-12-08 5:39 UTC (permalink / raw)
To: Keith Busch; +Cc: Jonathan Derrick, linux-nvme
Keith,
On 12/7/22 16:03, Keith Busch wrote:
> On Wed, Dec 07, 2022 at 10:54:25PM +0000, Chaitanya Kulkarni wrote:
>> This is only reference implementation. The process of the
>> standardization of the NVMe Live Migration is will take of these
>> opcodes and anything Vendor specific present in this series.
>>
>> It is very important to get some feedback on this to help the
>> standardization in any way.
>
> We have the NVMe TWG, and live-migration is already active with TPAR4195. Why
> is anyone thinking a Linux mailing list is the appropriate forum to discuss
> standardizing an OS agnositic feature at this point? Your vfio APIs and vendor
> specific hijacks are premature implementation details at this point.
hmmm but it does have another subsystem than NVMe: VFIO and we don't
know how it will affect TP or not. There is no intention to
upstream vendor specific implementation as stated explicitly in
the cover-letter.
Can you please let us know what is the right way in this case to
get a feedback from both subsystems NVMe and VFIO ?
I think similar attempt is been done as RFC [1]. Aren't RFCs
supposed to be posted to get more clarification either way ?
and if it is soo premature in a way that is not even worth
generating productive discussion then we can simply let
authors know.
-ck
[1]
https://lore.kernel.org/all/20221207010705.35128-1-brett.creeley@amd.com/
^ permalink raw reply [flat|nested] 71+ messages in thread
* RE: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 13:09 ` Christoph Hellwig
2022-12-06 13:52 ` Jason Gunthorpe
@ 2022-12-09 2:05 ` Tian, Kevin
2022-12-09 16:53 ` Li, Yadong
1 sibling, 1 reply; 71+ messages in thread
From: Tian, Kevin @ 2022-12-09 2:05 UTC (permalink / raw)
To: Christoph Hellwig, Jason Gunthorpe
Cc: Rao, Lei, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, mjrosato, linux-kernel,
linux-nvme, kvm, Dong, Eddie, Li, Yadong, Liu, Yi L, Wilk,
Konrad, stephen, Yuan, Hang
> From: Christoph Hellwig <hch@lst.de>
> Sent: Tuesday, December 6, 2022 9:09 PM
>
>
> > I don't think we know enough about this space at the moment to fix a
> > specification to one path or the other, so I hope the TPAR will settle
> > on something that can support both models in SW and people can try
> > things out.
>
> I've not seen anyone from Intel actually contributing to the live
> migration TPAR, which is almost two month old by now.
Not a NVMe guy but obviously Intel should join. I have forwarded this
to internal folks to check the actual status.
And I also asked them to prepare a document explaining how this
opaque cmd actually works to address your concerns.
^ permalink raw reply [flat|nested] 71+ messages in thread
* RE: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 7:58 ` Christoph Hellwig
@ 2022-12-09 2:11 ` Tian, Kevin
2022-12-12 7:41 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Tian, Kevin @ 2022-12-09 2:11 UTC (permalink / raw)
To: Christoph Hellwig, Max Gurtovoy
Cc: Jason Gunthorpe, Rao, Lei, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
mjrosato, linux-kernel, linux-nvme, kvm, Dong, Eddie, Li, Yadong,
Liu, Yi L, Wilk, Konrad, stephen, Yuan, Hang
> From: Christoph Hellwig <hch@lst.de>
> Sent: Wednesday, December 7, 2022 3:59 PM
>
> On Wed, Dec 07, 2022 at 04:30:20AM +0200, Max Gurtovoy wrote:
> > I'm not sure how awkward is for migration driver to ask the controlling
> > device driver to operate a migration action.
>
> It can't. That's the whole point. The controlled function that is
> being migrate must be absolutely unaware of that (except for things
> like quiescing access or FLRs that could happen anyway), because
> otherwise your have a fundamental information leak.
>
Can you elaborate which information is leaked?
No matter who provides the uAPI (controlling or controlled), end of
the day it's the same cmd invoked on the controlling device to save/
restore the state of the controlled device itself.
^ permalink raw reply [flat|nested] 71+ messages in thread
* RE: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 20:08 ` Jason Gunthorpe
@ 2022-12-09 2:50 ` Tian, Kevin
2022-12-09 18:56 ` Dong, Eddie
2022-12-11 11:39 ` Max Gurtovoy
2022-12-12 7:50 ` Christoph Hellwig
2 siblings, 1 reply; 71+ messages in thread
From: Tian, Kevin @ 2022-12-09 2:50 UTC (permalink / raw)
To: Jason Gunthorpe, Christoph Hellwig
Cc: Rao, Lei, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, mjrosato, linux-kernel,
linux-nvme, kvm, Dong, Eddie, Li, Yadong, Liu, Yi L, Wilk,
Konrad, stephen, Yuan, Hang
> From: Jason Gunthorpe <jgg@ziepe.ca>
> Sent: Thursday, December 8, 2022 4:08 AM
>
> For instance how do I trap FLR like mlx5 must do if the
> drivers/live_migration code cannot intercept the FLR VFIO ioctl?
>
> How do I mangle and share the BAR like hisilicon does?
>
> Which is really why this is in VFIO in the first place. It actually is
> coupled in practice, if not in theory.
>
Those are good questions which I also buy in to stay with the
current VFIO framework.
Actually the same controlling vs. controlled design choice also exists
in the hardware side. There are plenty of SR-IOV devices supporting
doorbells for VF (controlled function) to call services on PF (controlling
function) while the doorbell interface is implemented on the VF side.
If following the direction having controlling function to explicitly
provide services then all those doorbells should be deprecated
and instead we want explicit communications between VF driver
and PF driver.
From userspace driver p.o.v. the VFIO uAPI is kind of a device
programming interface. Here we just present everything related
to the controlled device itself (including the state management)
via a centralized portal though in the kernel there might be linkage
out of VFIO to reach the controlling driver. kind of a sw doorbell. 😊
btw just to add more background to this work. Half a year ago Lei
actually did a flavor [1] in the other way.
The controlling function of Intel IPU card also supports a network gRPC
protocol to manage the state of controlled NVMe function.
Then that series attempted to introduce an out-of-band migration
framework in Qemu so instead of doing in-line state management
via kernel VFIO uAPI Qemu can turn to an external plugin which
forwards the state cmd via gRPC to the controlling function.
Just that the controlling driver is not in the kernel.
It's dropped as the inline way was preferred.
Thanks
Kevin
[1] https://lore.kernel.org/all/20220524061848.1615706-14-lei.rao@intel.com/T/
^ permalink raw reply [flat|nested] 71+ messages in thread
* RE: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-09 2:05 ` Tian, Kevin
@ 2022-12-09 16:53 ` Li, Yadong
2022-12-12 8:11 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Li, Yadong @ 2022-12-09 16:53 UTC (permalink / raw)
To: Tian, Kevin, Christoph Hellwig, Jason Gunthorpe
Cc: Rao, Lei, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, mjrosato, linux-kernel,
linux-nvme, kvm, Dong, Eddie, Liu, Yi L, Wilk, Konrad, stephen,
Yuan, Hang
>From: Tian, Kevin <kevin.tian@intel.com>
>Not a NVMe guy but obviously Intel should join. I have forwarded this
>to internal folks to check the actual status.
Intel team has been actively participating in the TPAR definition over last month.
The key leadership in NVMe WG, Peter and Nick (from Intel), are on top of this TPAR,
and help influence the scope of the TPAR to better support IPU/DPUs. IPU/DPU is a
new type of device that desperately needs a standard based live migration solution.
Soon, you may also see more Intel people to be part of the SW WG for the NVMe live
migration standardization effort.
>And I also asked them to prepare a document explaining how this
>opaque cmd actually works to address your concerns.
There is nothing secret. It's the VF states including VF CSR registers, IO QP states, and
the AdminQ state. The AdminQ state may also include the pending AER command.
As part of the NVMe live migration standardization effort, it's desirable to standardize
the structure as much as we can, and then have an extension for any device specific
state that may be required to work around specific design HW limitations.
^ permalink raw reply [flat|nested] 71+ messages in thread
* RE: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-09 2:50 ` Tian, Kevin
@ 2022-12-09 18:56 ` Dong, Eddie
0 siblings, 0 replies; 71+ messages in thread
From: Dong, Eddie @ 2022-12-09 18:56 UTC (permalink / raw)
To: Tian, Kevin, Jason Gunthorpe, Christoph Hellwig
Cc: Rao, Lei, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, mjrosato, linux-kernel,
linux-nvme, kvm, Li, Yadong, Liu, Yi L, Wilk, Konrad, stephen,
Yuan, Hang
>
> If following the direction having controlling function to explicitly provide
> services then all those doorbells should be deprecated and instead we want
> explicit communications between VF driver and PF driver.
Hardware mechanism of communication (door bell here) can be used to
support broader scenario when VF driver and PF driver run in 2 different
OS kernels (when the VF is assigned to a VM).
>
> From userspace driver p.o.v. the VFIO uAPI is kind of a device programming
> interface. Here we just present everything related to the controlled device
> itself (including the state management) via a centralized portal though in the
> kernel there might be linkage out of VFIO to reach the controlling driver. kind
> of a sw doorbell. 😊
Yes.
And sw doorbell is more efficient than hardware doorbell 😊 .
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 20:08 ` Jason Gunthorpe
2022-12-09 2:50 ` Tian, Kevin
@ 2022-12-11 11:39 ` Max Gurtovoy
2022-12-12 7:55 ` Christoph Hellwig
2022-12-12 7:50 ` Christoph Hellwig
2 siblings, 1 reply; 71+ messages in thread
From: Max Gurtovoy @ 2022-12-11 11:39 UTC (permalink / raw)
To: Jason Gunthorpe, Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan, Oren Duer
On 12/7/2022 10:08 PM, Jason Gunthorpe wrote:
> On Wed, Dec 07, 2022 at 07:33:33PM +0100, Christoph Hellwig wrote:
>> On Wed, Dec 07, 2022 at 01:31:44PM -0400, Jason Gunthorpe wrote:
>>>> Sorry, I meant VF. Your continued using of SR-IOV teminology now keeps
>>>> confusing my mind so much that I start mistyping things.
>>> Well, what words do you want to use?
>> The same I've used through this whole thread: controlling and
>> controlled function.
>>
>>> So I don't think I've learned anything more about your objection.
>>>
>>> "fundamentally broken" doesn't help
>> The objection is that:
>>
>> - in hardware fundamentally only the controlling funtion can
>> control live migration features on the controlled function,
>> because the controlled function is assigned to a VM which has
>> control over it.
> Yes
>
> However hisilicon managed to do their implementation without this, or
> rather you could say their "controlling function" is a single MMIO BAR
> page in their PCI VF and their "controlled function" is the rest of
> the PCI VF.
>
>> - for the same reason there is no portable way to even find
>> the controlling function from a controlled function, unless
>> you want to equate PF = controlling and VF = controlled,
>> and even that breaks down in some corner cases
> As you say, the kernel must know the relationship between
> controlling->controlled. Nothing else is sane.
>
> If the kernel knows this information then we can find a way for the
> vfio_device to have pointers to both controlling and controlled
> objects. I have a suggestion below.
>
>> - if you want to control live migration from the controlled
>> VM you need a new vfio subdriver for a function that has
>> absolutely no new functionality itself related to live
>> migration (quirks for bugs excepted).
> I see it differently, the VFIO driver *is* the live migration
> driver. Look at all the drivers that have come through and they are
> 99% live migration code. They have, IMHO, properly split the live
> migration concern out of their controlling/PF driver and placed it in
> the "VFIO live migration driver".
>
> We've done a pretty good job of allowing the VFIO live migration
> driver to pretty much just focus on live migration stuff and delegate
> the VFIO part to library code.
>
> Excepting quirks and bugs sounds nice, except we actually can't ignore
> them. Having all the VFIO capabilities is exactly how we are fixing
> the quirks and bugs in the first place, and I don't see your vision
> how we can continue to do that if we split all the live migration code
> into yet another subsystem.
>
> For instance how do I trap FLR like mlx5 must do if the
> drivers/live_migration code cannot intercept the FLR VFIO ioctl?
>
> How do I mangle and share the BAR like hisilicon does?
>
> Which is really why this is in VFIO in the first place. It actually is
> coupled in practice, if not in theory.
>
>> So by this architecture you build a convoluted mess where you need
>> tons of vfio subdrivers that mostly just talk to the driver for the
>> controlling function, which they can't even sanely discover. That's
>> what I keep calling fundamentally broken.
> The VFIO live migration drivers will look basically the same if you
> put them under drivers/live_migration. This cannot be considered a
> "convoluted mess" as splitting things by subsystem is best-practice,
> AFAIK.
>
> If we accept that drivers/vfio can be the "live migration subsystem"
> then lets go all the way and have the controlling driver to call
> vfio_device_group_register() to create the VFIO char device for the
> controlled function.
>
> This solves the "sanely discover" problem because of course the
> controlling function driver knows what the controlled function is and
> it can acquire both functions before it calls
> vfio_device_group_register().
>
> This is actually what I want to do anyhow for SIOV-like functions and
> VFIO. Doing it for PCI VFs (or related PFs) is very nice symmetry. I
> really dislike that our current SRIOV model in Linux forces the VF to
> instantly exist without a chance for the controlling driver to
> provision it.
>
> We have some challenges on how to do this in the kernel, but I think
> we can overcome them. VFIO is ready for this thanks to all the
> restructuring work we already did.
>
> I'd really like to get away from VFIO having to do all this crazy
> sysfs crap to activate its driver. I think there is a lot of appeal to
> having, say, a nvmecli command that just commands the controlling
> driver to provision a function, enable live migration, configure it
> and then make it visible via VFIO. The same API regardless if the
> underlying controlled function technology is PF/VF/SIOV.
>
> At least we have been very interested in doing that for networking
> devices.
>
> Jason
Jason/Christoph,
As I mentioned earlier we have 2 orthogonal paths here: implementation
and SPEC. They are for some reason mixed in this discussion.
I've tried to understand some SPEC related issues that were raised here,
that if we fix them - the implementation will be possible and all the
VFIO efforts we did can be re-used.
In high level I think that for the SPEC:
1. Need to define a concept of a "virtual subsystem". A primary
controller will be able to create a virtual subsystem. Inside this
subsystem the primary controller will be the master ("the controlling")
of the migration process. It will also be able to add secondary
controllers to this virtual subsystem and assign "virtual controller ID"
to it.
something like:
- nvme virtual_subsys_create --dev=/dev/nvme1 --virtual_nqn="my_v_nqn_1"
--dev_vcid = 1
- nvme virtual_subsys_add --dev=/dev/nvme1 --virtual_nqn="my_v_nqn_1"
--secondary_dev=/dev/nvme2 --secondary_dev_vcid=20
2. Now the primary controller have a list of ctrls inside it's virtual
subsystem for migration. It has handle to it that doesn't go away after
binding the controlled function to VFIO.
3. Same virtual subsystem should be created in the destination hypervisor.
4. Now, migration process starts using the VFIO uAPI - we will get to a
point that VFIO driver of the controlled function needs to ask the
controlling function to send admin commands to manage the migration process.
How to do it ? implementation detail. We can set a pointer in
pci_dev/dev structures or we can ask
nvme_migration_handle_get(controlled_function) or NVMe can expose API's
dedicated to migration nvme_state_save(controlled_function).
When creating a virtual subsystem and adding controllers to it, we can
control any leakage or narrow some functionality that make migration
impossible. This can be using more admin commands for example.
After the migration process is over, one can remove the secondary
controller from the virtual subsystem and re-use it.
WDYT ?
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 15:01 ` Christoph Hellwig
2022-12-06 15:28 ` Jason Gunthorpe
@ 2022-12-11 12:05 ` Max Gurtovoy
2022-12-11 13:21 ` Rao, Lei
1 sibling, 1 reply; 71+ messages in thread
From: Max Gurtovoy @ 2022-12-11 12:05 UTC (permalink / raw)
To: Christoph Hellwig, Jason Gunthorpe
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan, Oren Duer
On 12/6/2022 5:01 PM, Christoph Hellwig wrote:
> On Tue, Dec 06, 2022 at 10:48:22AM -0400, Jason Gunthorpe wrote:
>> Sadly in Linux we don't have a SRIOV VF lifecycle model that is any
>> use.
> Beward: The secondary function might as well be a physical function
> as well. In fact one of the major customers for "smart" multifunction
> nvme devices prefers multi-PF devices over SR-IOV VFs. (and all the
> symmetric dual ported devices are multi-PF as well).
>
> So this isn't really about a VF live cycle, but how to manage life
> migration, especially on the receive / restore side. And restoring
> the entire controller state is extremely invasive and can't be done
> on a controller that is in any classic form live. In fact a lot
> of the state is subsystem-wide, so without some kind of virtualization
> of the subsystem it is impossible to actually restore the state.
ohh, great !
I read this subsystem virtualization proposal of yours after I sent my
proposal for subsystem virtualization in patch 1/5 thread.
I guess this means that this is the right way to go.
Lets continue brainstorming this idea. I think this can be the way to
migrate NVMe controllers in a standard way.
>
> To cycle back to the hardware that is posted here, I'm really confused
> how it actually has any chance to work and no one has even tried
> to explain how it is supposed to work.
I guess in vendor specific implementation you can assume some things
that we are discussing now for making it as a standard.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-11 12:05 ` Max Gurtovoy
@ 2022-12-11 13:21 ` Rao, Lei
2022-12-11 14:51 ` Max Gurtovoy
0 siblings, 1 reply; 71+ messages in thread
From: Rao, Lei @ 2022-12-11 13:21 UTC (permalink / raw)
To: Max Gurtovoy, Christoph Hellwig, Jason Gunthorpe
Cc: kbusch, axboe, kch, sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, kevin.tian, mjrosato, linux-kernel,
linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu, Konrad.wilk,
stephen, hang.yuan, Oren Duer
On 12/11/2022 8:05 PM, Max Gurtovoy wrote:
>
> On 12/6/2022 5:01 PM, Christoph Hellwig wrote:
>> On Tue, Dec 06, 2022 at 10:48:22AM -0400, Jason Gunthorpe wrote:
>>> Sadly in Linux we don't have a SRIOV VF lifecycle model that is any
>>> use.
>> Beward: The secondary function might as well be a physical function
>> as well. In fact one of the major customers for "smart" multifunction
>> nvme devices prefers multi-PF devices over SR-IOV VFs. (and all the
>> symmetric dual ported devices are multi-PF as well).
>>
>> So this isn't really about a VF live cycle, but how to manage life
>> migration, especially on the receive / restore side. And restoring
>> the entire controller state is extremely invasive and can't be done
>> on a controller that is in any classic form live. In fact a lot
>> of the state is subsystem-wide, so without some kind of virtualization
>> of the subsystem it is impossible to actually restore the state.
>
> ohh, great !
>
> I read this subsystem virtualization proposal of yours after I sent my proposal for subsystem virtualization in patch 1/5 thread.
> I guess this means that this is the right way to go.
> Lets continue brainstorming this idea. I think this can be the way to migrate NVMe controllers in a standard way.
>
>>
>> To cycle back to the hardware that is posted here, I'm really confused
>> how it actually has any chance to work and no one has even tried
>> to explain how it is supposed to work.
>
> I guess in vendor specific implementation you can assume some things that we are discussing now for making it as a standard.
Yes, as I wrote in the cover letter, this is a reference implementation to
start a discussion and help drive standardization efforts, but this series
works well for Intel IPU NVMe. As Jason said, there are two use cases:
shared medium and local medium. I think the live migration of the local medium
is complicated due to the large amount of user data that needs to be migrated.
I don't have a good idea to deal with this situation. But for Intel IPU NVMe,
each VF can connect to remote storage via the NVMF protocol to achieve storage
offloading. This is the shared medium. In this case, we don't need to migrate
the user data, which will significantly simplify the work of live migration.
The series tries to solve the problem of live migration of shared medium.
But it still lacks dirty page tracking and P2P support, we are also developing
these features.
About the nvme device state, As described in my document, the VF states include
VF CSR registers, Every IO Queue Pair state, and the AdminQ state. During the
implementation, I found that the device state data is small per VF. So, I decided
to use the admin queue of the Primary controller to send the live migration
commands to save and restore the VF states like MLX5.
Thanks,
Lei
>
>
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-11 13:21 ` Rao, Lei
@ 2022-12-11 14:51 ` Max Gurtovoy
2022-12-12 1:20 ` Rao, Lei
2022-12-12 8:09 ` Christoph Hellwig
0 siblings, 2 replies; 71+ messages in thread
From: Max Gurtovoy @ 2022-12-11 14:51 UTC (permalink / raw)
To: Rao, Lei, Christoph Hellwig, Jason Gunthorpe
Cc: kbusch, axboe, kch, sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, kevin.tian, mjrosato, linux-kernel,
linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu, Konrad.wilk,
stephen, hang.yuan, Oren Duer
On 12/11/2022 3:21 PM, Rao, Lei wrote:
>
>
> On 12/11/2022 8:05 PM, Max Gurtovoy wrote:
>>
>> On 12/6/2022 5:01 PM, Christoph Hellwig wrote:
>>> On Tue, Dec 06, 2022 at 10:48:22AM -0400, Jason Gunthorpe wrote:
>>>> Sadly in Linux we don't have a SRIOV VF lifecycle model that is any
>>>> use.
>>> Beward: The secondary function might as well be a physical function
>>> as well. In fact one of the major customers for "smart" multifunction
>>> nvme devices prefers multi-PF devices over SR-IOV VFs. (and all the
>>> symmetric dual ported devices are multi-PF as well).
>>>
>>> So this isn't really about a VF live cycle, but how to manage life
>>> migration, especially on the receive / restore side. And restoring
>>> the entire controller state is extremely invasive and can't be done
>>> on a controller that is in any classic form live. In fact a lot
>>> of the state is subsystem-wide, so without some kind of virtualization
>>> of the subsystem it is impossible to actually restore the state.
>>
>> ohh, great !
>>
>> I read this subsystem virtualization proposal of yours after I sent
>> my proposal for subsystem virtualization in patch 1/5 thread.
>> I guess this means that this is the right way to go.
>> Lets continue brainstorming this idea. I think this can be the way to
>> migrate NVMe controllers in a standard way.
>>
>>>
>>> To cycle back to the hardware that is posted here, I'm really confused
>>> how it actually has any chance to work and no one has even tried
>>> to explain how it is supposed to work.
>>
>> I guess in vendor specific implementation you can assume some things
>> that we are discussing now for making it as a standard.
>
> Yes, as I wrote in the cover letter, this is a reference
> implementation to
> start a discussion and help drive standardization efforts, but this
> series
> works well for Intel IPU NVMe. As Jason said, there are two use cases:
> shared medium and local medium. I think the live migration of the
> local medium
> is complicated due to the large amount of user data that needs to be
> migrated.
> I don't have a good idea to deal with this situation. But for Intel
> IPU NVMe,
> each VF can connect to remote storage via the NVMF protocol to achieve
> storage
> offloading. This is the shared medium. In this case, we don't need to
> migrate
> the user data, which will significantly simplify the work of live
> migration.
I don't think that medium migration should be part of the SPEC. We can
specify it's out of scope.
All the idea of live migration is to have a short downtime and I don't
think we can guarantee short downtime if we need to copy few terabytes
throw the networking.
If the media copy is taking few seconds, there is no need to do live
migration of few milisecs downtime. Just do regular migration of a VM.
>
> The series tries to solve the problem of live migration of shared medium.
> But it still lacks dirty page tracking and P2P support, we are also
> developing
> these features.
>
> About the nvme device state, As described in my document, the VF
> states include
> VF CSR registers, Every IO Queue Pair state, and the AdminQ state.
> During the
> implementation, I found that the device state data is small per VF.
> So, I decided
> to use the admin queue of the Primary controller to send the live
> migration
> commands to save and restore the VF states like MLX5.
I think and hope we all agree that the AdminQ of the controlling NVMe
function will be used to migrate the controlled NVMe function.
which document are you refereeing to ?
>
> Thanks,
> Lei
>
>>
>>
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-11 14:51 ` Max Gurtovoy
@ 2022-12-12 1:20 ` Rao, Lei
2022-12-12 8:09 ` Christoph Hellwig
1 sibling, 0 replies; 71+ messages in thread
From: Rao, Lei @ 2022-12-12 1:20 UTC (permalink / raw)
To: Max Gurtovoy, Christoph Hellwig, Jason Gunthorpe
Cc: kbusch, axboe, kch, sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, kevin.tian, mjrosato, linux-kernel,
linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu, Konrad.wilk,
stephen, hang.yuan, Oren Duer
On 12/11/2022 10:51 PM, Max Gurtovoy wrote:
>
> On 12/11/2022 3:21 PM, Rao, Lei wrote:
>>
>>
>> On 12/11/2022 8:05 PM, Max Gurtovoy wrote:
>>>
>>> On 12/6/2022 5:01 PM, Christoph Hellwig wrote:
>>>> On Tue, Dec 06, 2022 at 10:48:22AM -0400, Jason Gunthorpe wrote:
>>>>> Sadly in Linux we don't have a SRIOV VF lifecycle model that is any
>>>>> use.
>>>> Beward: The secondary function might as well be a physical function
>>>> as well. In fact one of the major customers for "smart" multifunction
>>>> nvme devices prefers multi-PF devices over SR-IOV VFs. (and all the
>>>> symmetric dual ported devices are multi-PF as well).
>>>>
>>>> So this isn't really about a VF live cycle, but how to manage life
>>>> migration, especially on the receive / restore side. And restoring
>>>> the entire controller state is extremely invasive and can't be done
>>>> on a controller that is in any classic form live. In fact a lot
>>>> of the state is subsystem-wide, so without some kind of virtualization
>>>> of the subsystem it is impossible to actually restore the state.
>>>
>>> ohh, great !
>>>
>>> I read this subsystem virtualization proposal of yours after I sent my proposal for subsystem virtualization in patch 1/5 thread.
>>> I guess this means that this is the right way to go.
>>> Lets continue brainstorming this idea. I think this can be the way to migrate NVMe controllers in a standard way.
>>>
>>>>
>>>> To cycle back to the hardware that is posted here, I'm really confused
>>>> how it actually has any chance to work and no one has even tried
>>>> to explain how it is supposed to work.
>>>
>>> I guess in vendor specific implementation you can assume some things that we are discussing now for making it as a standard.
>>
>> Yes, as I wrote in the cover letter, this is a reference implementation to
>> start a discussion and help drive standardization efforts, but this series
>> works well for Intel IPU NVMe. As Jason said, there are two use cases:
>> shared medium and local medium. I think the live migration of the local medium
>> is complicated due to the large amount of user data that needs to be migrated.
>> I don't have a good idea to deal with this situation. But for Intel IPU NVMe,
>> each VF can connect to remote storage via the NVMF protocol to achieve storage
>> offloading. This is the shared medium. In this case, we don't need to migrate
>> the user data, which will significantly simplify the work of live migration.
>
> I don't think that medium migration should be part of the SPEC. We can specify it's out of scope.
>
> All the idea of live migration is to have a short downtime and I don't think we can guarantee short downtime if we need to copy few terabytes throw the networking.
> If the media copy is taking few seconds, there is no need to do live migration of few milisecs downtime. Just do regular migration of a
>
>>
>> The series tries to solve the problem of live migration of shared medium.
>> But it still lacks dirty page tracking and P2P support, we are also developing
>> these features.
>>
>> About the nvme device state, As described in my document, the VF states include
>> VF CSR registers, Every IO Queue Pair state, and the AdminQ state. During the
>> implementation, I found that the device state data is small per VF. So, I decided
>> to use the admin queue of the Primary controller to send the live migration
>> commands to save and restore the VF states like MLX5.
>
> I think and hope we all agree that the AdminQ of the controlling NVMe function will be used to migrate the controlled NVMe function.
Fully agree.
>
> which document are you refereeing to ?
The fifth patch includes the definition of these commands and how the firmware handles
these live migration commands. It's the documentation that I referenced.
>>
>>>
>>>
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-09 2:11 ` Tian, Kevin
@ 2022-12-12 7:41 ` Christoph Hellwig
0 siblings, 0 replies; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-12 7:41 UTC (permalink / raw)
To: Tian, Kevin
Cc: Christoph Hellwig, Max Gurtovoy, Jason Gunthorpe, Rao, Lei,
kbusch, axboe, kch, sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, mjrosato, linux-kernel, linux-nvme,
kvm, Dong, Eddie, Li, Yadong, Liu, Yi L, Wilk, Konrad, stephen,
Yuan, Hang
On Fri, Dec 09, 2022 at 02:11:21AM +0000, Tian, Kevin wrote:
> > It can't. That's the whole point. The controlled function that is
> > being migrate must be absolutely unaware of that (except for things
> > like quiescing access or FLRs that could happen anyway), because
> > otherwise your have a fundamental information leak.
> >
>
> Can you elaborate which information is leaked?
Information about what controllers exist, what namespaces exist, etc.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-07 20:08 ` Jason Gunthorpe
2022-12-09 2:50 ` Tian, Kevin
2022-12-11 11:39 ` Max Gurtovoy
@ 2022-12-12 7:50 ` Christoph Hellwig
2022-12-13 14:01 ` Jason Gunthorpe
2 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-12 7:50 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Wed, Dec 07, 2022 at 04:08:02PM -0400, Jason Gunthorpe wrote:
> However hisilicon managed to do their implementation without this, or
> rather you could say their "controlling function" is a single MMIO BAR
> page in their PCI VF and their "controlled function" is the rest of
> the PCI VF.
Eww. So you need to carefully filter the BAR and can't actually do
any DMA at all? I'm not sure that is actually practical, especially
not for something with a lot of state.
> If the kernel knows this information then we can find a way for the
> vfio_device to have pointers to both controlling and controlled
> objects. I have a suggestion below.
So now we need to write a vfio shim for every function even if there
is absolutely nothing special about that function? Migrating really
is the controlling functions behavior, and writing a new vfio bit
for every controlled thing just does not scale.
> I see it differently, the VFIO driver *is* the live migration
> driver. Look at all the drivers that have come through and they are
> 99% live migration code.
Yes, and that's the problem, because they are associated with the
controlled function, and now we have a communication problem between
that vfio driver binding to the controlled function and the drive
that actually controlls live migration that is associated with the
controlling function. In other words: you've created a giant mess.
> Excepting quirks and bugs sounds nice, except we actually can't ignore
> them.
I'm not proposing to ignore them. But they should not be needed most
of the time.
> For instance how do I trap FLR like mlx5 must do if the
> drivers/live_migration code cannot intercept the FLR VFIO ioctl?
>
> How do I mangle and share the BAR like hisilicon does?
>
> Which is really why this is in VFIO in the first place. It actually is
> coupled in practice, if not in theory.
So you've created a long term userspace API around working around
around buggy and/or misdesigned early designs and now want to force
it down everyones throat?
Can we please take a step back and think about how things should work,
and only then think how to work around weirdo devices that do strange
things as a second step?
> If we accept that drivers/vfio can be the "live migration subsystem"
> then lets go all the way and have the controlling driver to call
> vfio_device_group_register() to create the VFIO char device for the
> controlled function.
While creating the VFs from the PF driver makes a lot more sense,
remember that vfio is absolutely not the only use case for VFs.
There are plenty use cases where you want to use them with the normal
kernel driver as well. So the interface to create VFs needs a now
to decide if it should be vfio exported, or use the normal kernel
binding.
> This solves the "sanely discover" problem because of course the
> controlling function driver knows what the controlled function is and
> it can acquire both functions before it calls
> vfio_device_group_register().
Yes.
> This is actually what I want to do anyhow for SIOV-like functions and
> VFIO. Doing it for PCI VFs (or related PFs) is very nice symmetry. I
> really dislike that our current SRIOV model in Linux forces the VF to
> instantly exist without a chance for the controlling driver to
> provision it.
For SIOV you have no other choice anyway. But I agree that it is
the right thing to do for VFIO. Now the next step is to control
live migration from the controlling function, so that for most sane
devices the controlled device does not need all the pointless
boilerplate of its own vfio driver.
> I'd really like to get away from VFIO having to do all this crazy
> sysfs crap to activate its driver. I think there is a lot of appeal to
> having, say, a nvmecli command that just commands the controlling
> driver to provision a function, enable live migration, configure it
> and then make it visible via VFIO. The same API regardless if the
> underlying controlled function technology is PF/VF/SIOV.
Yes.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-11 11:39 ` Max Gurtovoy
@ 2022-12-12 7:55 ` Christoph Hellwig
2022-12-12 14:49 ` Max Gurtovoy
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-12 7:55 UTC (permalink / raw)
To: Max Gurtovoy
Cc: Jason Gunthorpe, Christoph Hellwig, Lei Rao, kbusch, axboe, kch,
sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, kevin.tian, mjrosato, linux-kernel,
linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu, Konrad.wilk,
stephen, hang.yuan, Oren Duer
On Sun, Dec 11, 2022 at 01:39:37PM +0200, Max Gurtovoy wrote:
> 1. Need to define a concept of a "virtual subsystem". A primary controller
> will be able to create a virtual subsystem. Inside this subsystem the
> primary controller will be the master ("the controlling") of the migration
> process. It will also be able to add secondary controllers to this virtual
> subsystem and assign "virtual controller ID" to it.
> something like:
> - nvme virtual_subsys_create --dev=/dev/nvme1 --virtual_nqn="my_v_nqn_1"
> --dev_vcid = 1
> - nvme virtual_subsys_add --dev=/dev/nvme1 --virtual_nqn="my_v_nqn_1"
> --secondary_dev=/dev/nvme2 --secondary_dev_vcid=20
Yes. Note that there is a bit more state than just the NQN. You also
need at least a serial number, and also probably a different vendor
ID (the PCI vendor ID that is also mirror in Identify Controller and
the IEEE OUI), and new unique namespace identifier.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-06 18:00 ` Dong, Eddie
@ 2022-12-12 7:57 ` Christoph Hellwig
0 siblings, 0 replies; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-12 7:57 UTC (permalink / raw)
To: Dong, Eddie
Cc: Christoph Hellwig, Jason Gunthorpe, Rao, Lei, kbusch, axboe, kch,
sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, Tian, Kevin, mjrosato, linux-kernel,
linux-nvme, kvm, Li, Yadong, Liu, Yi L, Wilk, Konrad, stephen,
Yuan, Hang
On Tue, Dec 06, 2022 at 06:00:27PM +0000, Dong, Eddie wrote:
> NVMe spec is general, but the implementation details (such as internal state) may
> be vendor specific. If the migration happens between 2 identical NVMe devices
> (from same vendor/device w/ same firmware version), migration of
> subsystem-wide state can be naturally covered, right?
No. If you want live migration for nvme supported in Linux, it must
be speced in the NVMe technical working group and interoperate between
different implementations.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-11 14:51 ` Max Gurtovoy
2022-12-12 1:20 ` Rao, Lei
@ 2022-12-12 8:09 ` Christoph Hellwig
1 sibling, 0 replies; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-12 8:09 UTC (permalink / raw)
To: Max Gurtovoy
Cc: Rao, Lei, Christoph Hellwig, Jason Gunthorpe, kbusch, axboe, kch,
sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, kevin.tian, mjrosato, linux-kernel,
linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu, Konrad.wilk,
stephen, hang.yuan, Oren Duer
On Sun, Dec 11, 2022 at 04:51:02PM +0200, Max Gurtovoy wrote:
> I don't think that medium migration should be part of the SPEC. We can
> specify it's out of scope.
This is the main item in the TPAR in the technical working group,
with SQ/CQ state beeing the other one. So instead of arguing here
I'd suggest you all get involved in the working group ASAP.
> All the idea of live migration is to have a short downtime and I don't
> think we can guarantee short downtime if we need to copy few terabytes
> throw the networking.
You can. Look at the existing qemu code for live migration for
image based storage, the same concepts also work for hardware offloads.
> If the media copy is taking few seconds, there is no need to do live
> migration of few milisecs downtime. Just do regular migration of a VM.
The point is of course to not do the data migration during the downtime,
but to track newly written LBAs after the start of the copy proces.
Again look at qemu for how this has been done for years in software.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device
2022-12-09 16:53 ` Li, Yadong
@ 2022-12-12 8:11 ` Christoph Hellwig
0 siblings, 0 replies; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-12 8:11 UTC (permalink / raw)
To: Li, Yadong
Cc: Tian, Kevin, Christoph Hellwig, Jason Gunthorpe, Rao, Lei,
kbusch, axboe, kch, sagi, alex.williamson, cohuck, yishaih,
shameerali.kolothum.thodi, mjrosato, linux-kernel, linux-nvme,
kvm, Dong, Eddie, Liu, Yi L, Wilk, Konrad, stephen, Yuan, Hang
On Fri, Dec 09, 2022 at 04:53:47PM +0000, Li, Yadong wrote:
> The key leadership in NVMe WG, Peter and Nick (from Intel), are on top of this TPAR,
> and help influence the scope of the TPAR to better support IPU/DPUs.
You guys should talk more to each other. I think Peter especially has
been vocal to reduce the scope and not include this.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-12 7:55 ` Christoph Hellwig
@ 2022-12-12 14:49 ` Max Gurtovoy
0 siblings, 0 replies; 71+ messages in thread
From: Max Gurtovoy @ 2022-12-12 14:49 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Jason Gunthorpe, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan, Oren Duer
On 12/12/2022 9:55 AM, Christoph Hellwig wrote:
> On Sun, Dec 11, 2022 at 01:39:37PM +0200, Max Gurtovoy wrote:
>> 1. Need to define a concept of a "virtual subsystem". A primary controller
>> will be able to create a virtual subsystem. Inside this subsystem the
>> primary controller will be the master ("the controlling") of the migration
>> process. It will also be able to add secondary controllers to this virtual
>> subsystem and assign "virtual controller ID" to it.
>> something like:
>> - nvme virtual_subsys_create --dev=/dev/nvme1 --virtual_nqn="my_v_nqn_1"
>> --dev_vcid = 1
>> - nvme virtual_subsys_add --dev=/dev/nvme1 --virtual_nqn="my_v_nqn_1"
>> --secondary_dev=/dev/nvme2 --secondary_dev_vcid=20
> Yes. Note that there is a bit more state than just the NQN. You also
> need at least a serial number, and also probably a different vendor
> ID (the PCI vendor ID that is also mirror in Identify Controller and
> the IEEE OUI), and new unique namespace identifier.
Yes for sure there is more bits we should consider.
I wanted to describe the high level.
I think that we can maybe say the when a secondary function is moved to
a virtual subsystem its feature set of the virtual ctrl is narrowed to
mandatory NVMe features set.
And we'll provide an API to set/extend it's feature set to a maximum of
the feature set that the original ctrl of the secondary function had.
Then the sys admin will configure the virtual ctrl in both src/dst hosts.
The high level idea is to have a programmable way to set the features of
a virtual controller inside a virtual subsystem that is also programmable.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-12 7:50 ` Christoph Hellwig
@ 2022-12-13 14:01 ` Jason Gunthorpe
2022-12-13 16:08 ` Christoph Hellwig
0 siblings, 1 reply; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-13 14:01 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Mon, Dec 12, 2022 at 08:50:46AM +0100, Christoph Hellwig wrote:
> On Wed, Dec 07, 2022 at 04:08:02PM -0400, Jason Gunthorpe wrote:
> > However hisilicon managed to do their implementation without this, or
> > rather you could say their "controlling function" is a single MMIO BAR
> > page in their PCI VF and their "controlled function" is the rest of
> > the PCI VF.
>
> Eww. So you need to carefully filter the BAR and can't actually do
> any DMA at all? I'm not sure that is actually practical, especially
> not for something with a lot of state.
Indeed, but it is what they did and the HW should be supported by the
kernel, IMO.
> > If the kernel knows this information then we can find a way for the
> > vfio_device to have pointers to both controlling and controlled
> > objects. I have a suggestion below.
>
> So now we need to write a vfio shim for every function even if there
> is absolutely nothing special about that function? Migrating really
> is the controlling functions behavior, and writing a new vfio bit
> for every controlled thing just does not scale.
Huh? "does not scale?" We are looking at boilerplates of around 20-30
lines to make a VFIO driver for a real PCI device. Why is that even
something we should worry about optimizing?
And when you get into exciting future devices like SIOV you already
need to make a special VFIO driver anyhow.
> Yes, and that's the problem, because they are associated with the
> controlled function, and now we have a communication problem between
> that vfio driver binding to the controlled function and the drive
> that actually controlls live migration that is associated with the
> controlling function. In other words: you've created a giant mess.
So far 100% of the drivers that have been presented, including the two
RFC ones, have entanglements between live migration and vfio. Shifting
things to dev/live_migration doesn't make the "communication problem"
away, it just shifted it into another subsystem.
This is my point, I've yet to even see a driver that meets your
theoretical standard that it can exist without vfio entanglement. So
I'd be much more interested in this idea if we had a stable of drivers
that obviously were harmed by VFIO. We don't have that, and I don't
even think that we ever will, considering both RFC drivers have
devices that also stepped on the mlx5 FLR problem too.
The FLR thing actually makes sense, becauase it is not actually the
controlling function that is doing the live migration inside the
devices. The controlling function is just a *proxy* to deliver
commands to the controlled function. So FLR on the controlled device
effects commands being executed on the controlling function. It is a
pain.
As it is, live migration is only useful with VFIO, so they are put
together to keep things simpler. The only complexity is the
controlled/controlling issue and for all existing SRIOV PF/VF
relationships we have an OK solution (at least it isn't buggy).
nvme's higher flexability needs more work, but that doesn't mean the
idea is so wrong. I think you are reall overstating the "mess"
> I'm not proposing to ignore them. But they should not be needed most
> of the time.
I'm not seeing that in the drivers I've looked at.
> > Which is really why this is in VFIO in the first place. It actually is
> > coupled in practice, if not in theory.
>
> So you've created a long term userspace API around working around
> around buggy and/or misdesigned early designs and now want to force
> it down everyones throat?
No, we coupled live migration and VFIO because they are never useful
apart, and we accept that we must find reasonable solutions to linking
the controlling/controlled device because it is necessary in all cases
we've seen.
> > If we accept that drivers/vfio can be the "live migration subsystem"
> > then lets go all the way and have the controlling driver to call
> > vfio_device_group_register() to create the VFIO char device for the
> > controlled function.
>
> While creating the VFs from the PF driver makes a lot more sense,
> remember that vfio is absolutely not the only use case for VFs.
> There are plenty use cases where you want to use them with the normal
> kernel driver as well. So the interface to create VFs needs a now
> to decide if it should be vfio exported, or use the normal kernel
> binding.
Yes, that is why this problem has been open for so long. Fixing it
well requires some reconsideration of how the driver core works :(
It is worse than just VFIO vs one kernel driver, like mlx5 could spawn
a controlled function that is NVMe, VDPA, mlx5, virtio-net, VFIO,
etc.
When we create the function we really want to tell the device what
kind of function it is, and that also tells the kernel what driver
should be bound to it.
mlx5 even has weird limitations, like a controlled function that is
live migration capable has fewer features than a function that is
not. So the user must specify what parameters it wants the controlled
function to have..
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-13 14:01 ` Jason Gunthorpe
@ 2022-12-13 16:08 ` Christoph Hellwig
2022-12-13 17:49 ` Jason Gunthorpe
0 siblings, 1 reply; 71+ messages in thread
From: Christoph Hellwig @ 2022-12-13 16:08 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Christoph Hellwig, Lei Rao, kbusch, axboe, kch, sagi,
alex.williamson, cohuck, yishaih, shameerali.kolothum.thodi,
kevin.tian, mjrosato, linux-kernel, linux-nvme, kvm, eddie.dong,
yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On Tue, Dec 13, 2022 at 10:01:03AM -0400, Jason Gunthorpe wrote:
> > So now we need to write a vfio shim for every function even if there
> > is absolutely nothing special about that function? Migrating really
> > is the controlling functions behavior, and writing a new vfio bit
> > for every controlled thing just does not scale.
>
> Huh? "does not scale?" We are looking at boilerplates of around 20-30
> lines to make a VFIO driver for a real PCI device. Why is that even
> something we should worry about optimizing?
But we need a new driver for every controlled function now, which
is very different from the classic VFIO model where we had one
vfio_pci.
> And when you get into exciting future devices like SIOV you already
> need to make a special VFIO driver anyhow.
You need to special support for it. It's probably not another
Linux driver but part of the parent one, though.
> So far 100% of the drivers that have been presented, including the two
> RFC ones, have entanglements between live migration and vfio. Shifting
> things to dev/live_migration doesn't make the "communication problem"
> away, it just shifted it into another subsystem.
The main entanglement seems to be that it needs to support a vfio
interface for live migration while the actual commands go to the
parent device.
> This is my point, I've yet to even see a driver that meets your
> theoretical standard that it can exist without vfio entanglement.
It can't right now due to the VFIO design.
> > While creating the VFs from the PF driver makes a lot more sense,
> > remember that vfio is absolutely not the only use case for VFs.
> > There are plenty use cases where you want to use them with the normal
> > kernel driver as well. So the interface to create VFs needs a now
> > to decide if it should be vfio exported, or use the normal kernel
> > binding.
>
> Yes, that is why this problem has been open for so long. Fixing it
> well requires some reconsideration of how the driver core works :(
>
> It is worse than just VFIO vs one kernel driver, like mlx5 could spawn
> a controlled function that is NVMe, VDPA, mlx5, virtio-net, VFIO,
> etc.
This seems to violate the PCIe spec, which says:
"All VFs associated with a PF must be the same device type as the PF,
(e.g., the same network device type or the same storage device type.)",
which is also enforced by not allowing to read vendor/device/class
fields from VFs.
(not that I'm arguing that this is a good limit, but that's how
PCIe does it).
> When we create the function we really want to tell the device what
> kind of function it is, and that also tells the kernel what driver
> should be bound to it.
I'd rather have different ways to probe by passing a "kind" or "type"
argument along the device IDs during probing. E.g. "driver"
and "vfio", and then only match for the kind the creator of the device
added them to the device model for.
> mlx5 even has weird limitations, like a controlled function that is
> live migration capable has fewer features than a function that is
> not. So the user must specify what parameters it wants the controlled
> function to have..
I don't think that is weird. If you want to live migrate, you need to
a) make sure the feature set is compatible with the other side
b) there is only state that actually is migratable
so I'd expect that for any other sufficiently complex device. NVMe
for sure will have limits like this.
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver.
2022-12-13 16:08 ` Christoph Hellwig
@ 2022-12-13 17:49 ` Jason Gunthorpe
0 siblings, 0 replies; 71+ messages in thread
From: Jason Gunthorpe @ 2022-12-13 17:49 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Lei Rao, kbusch, axboe, kch, sagi, alex.williamson, cohuck,
yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm, eddie.dong, yadong.li, yi.l.liu,
Konrad.wilk, stephen, hang.yuan
On Tue, Dec 13, 2022 at 05:08:07PM +0100, Christoph Hellwig wrote:
> On Tue, Dec 13, 2022 at 10:01:03AM -0400, Jason Gunthorpe wrote:
> > > So now we need to write a vfio shim for every function even if there
> > > is absolutely nothing special about that function? Migrating really
> > > is the controlling functions behavior, and writing a new vfio bit
> > > for every controlled thing just does not scale.
> >
> > Huh? "does not scale?" We are looking at boilerplates of around 20-30
> > lines to make a VFIO driver for a real PCI device. Why is that even
> > something we should worry about optimizing?
>
> But we need a new driver for every controlled function now, which
> is very different from the classic VFIO model where we had one
> vfio_pci.
To be fair, mainly vfio_pci had that model. Other uses of VFIO have
device specific drivers already. We have the reset drivers in vfio
platform, and the mdevs already. SIOV drivers are coming and they will
not be general either. I know a few coming non-migration VFIO PCI
variant drivers as well to deal with HW issues.
Remember, we did a bunch of work to make this reasonable. Userspace
can properly probe the correct VFIO driver for the HW it wants to use,
just like normal devices. If we spawn the VFIO from the controlling
function then it obviously will bring the correct driver along too.
The mental model I have for VFIO is that every vfio_device has a
driver, and we have three "universal" drivers that wildcard match to
many devices (pci, fsl, and platform acpi reset). Otherwise VFIO is
like every other driver subsystem out there, with physical devices and
matching drivers that support them.
Creating drivers for HW is not a problem, that is what a driver
subsystem is for. We already invested effort in VFIO to make this
scalable.
> > And when you get into exciting future devices like SIOV you already
> > need to make a special VFIO driver anyhow.
>
> You need to special support for it. It's probably not another
> Linux driver but part of the parent one, though.
The designs we have done in mlx5 are split. The "parent" has just
enough shim to describe what the SIOV is in terms of a 'slice of the
parents resources' and then we layer another driver, located in the
proper subsystem, to operate that slice. VDPA makes a
/dev/virtio-whatever, VFIO would make a fake PCI function, mlx5 makes
a netdev, etc.
It is not so different from how a PF/VF relationship works, just that
the SIOV is described by a struct auxillary_device not a struct
pci_dev.
I don't really like implementing VFIO drivers outside drivers/vfio, I
think that has historically had bad outcomes in other subsystems.
> > So far 100% of the drivers that have been presented, including the two
> > RFC ones, have entanglements between live migration and vfio. Shifting
> > things to dev/live_migration doesn't make the "communication problem"
> > away, it just shifted it into another subsystem.
>
> The main entanglement seems to be that it needs to support a vfio
> interface for live migration while the actual commands go to the
> parent device.
Not at all, that is only a couple function calls in 4 of the drivers
so far.
The entanglement is that the live migration FSM and the VFIO device
operation are not isolated. I keep repeating this - mlx5 and the two
RFC drivers must trap VFIO operations and relay them to their
migration logic. hns has to mangle its BARs. These are things that
only exist on the VFIO side.
So, you are viewing live migration as orthogonal and separable to
VFIO, and I don't agree with this because I haven't yet seen any proof
in implementations.
Let's go through the nvme spec process and see how it works out. If
NVMe can address things which are tripping up other implemenations,
like FLR of the controlled function. Then we may have the first
example. If not, then it is just how things are.
FLR is trickey, it not obvious to me that you want a definition of
migration that isolates controlled function FLR from the migration
FSM..
There are advantages to having a reliable, universal, way to bring a
function back to a clean slate, including restoring it to full
operation (ie canceling any migration operation). The current
definition of FLR provides this.
> > It is worse than just VFIO vs one kernel driver, like mlx5 could spawn
> > a controlled function that is NVMe, VDPA, mlx5, virtio-net, VFIO,
> > etc.
>
> This seems to violate the PCIe spec, which says:
>
> "All VFs associated with a PF must be the same device type as the PF,
> (e.g., the same network device type or the same storage device type.)",
For VFs there are multiple PFs to follow the above, and for SIOV this
language doesn't apply.
It seems the PDS RFC driver does violate this spec requirement though..
> > When we create the function we really want to tell the device what
> > kind of function it is, and that also tells the kernel what driver
> > should be bound to it.
>
> I'd rather have different ways to probe by passing a "kind" or "type"
> argument along the device IDs during probing. E.g. "driver"
> and "vfio", and then only match for the kind the creator of the device
> added them to the device model for.
Not everything can be done during driver probing. There are certainly
steps at SIOV instantiation time or VF provisioning that impact what
exactly is available on the controlled function. Eg on mlx5 when we
create a VDPA device it actually is different from a full-function
mlx5 device and that customization was done before any driver was
probed.
In fact, not only is it done before driver binding, but it can be
enforced as a security property from the DPU side when the DPU is the
thing creating the function.
I like the general idea of type to help specify the driver to probe,
we tried to work on something like that once and it didn't go far, but
I did like the concept of it.
> > mlx5 even has weird limitations, like a controlled function that is
> > live migration capable has fewer features than a function that is
> > not. So the user must specify what parameters it wants the controlled
> > function to have..
>
> I don't think that is weird. If you want to live migrate, you need to
>
> a) make sure the feature set is compatible with the other side
> b) there is only state that actually is migratable
>
> so I'd expect that for any other sufficiently complex device. NVMe
> for sure will have limits like this.
Oy, this has been pretty hard to define in mlx5 already :( Hopefully
nvme-cli can sort it out for NVMe configurables.
Jason
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 3/5] nvme-vfio: enable the function of VFIO live migration.
2022-12-06 5:58 ` [RFC PATCH 3/5] nvme-vfio: enable the function of VFIO live migration Lei Rao
@ 2023-01-19 10:21 ` Max Gurtovoy
2023-02-09 9:09 ` Rao, Lei
0 siblings, 1 reply; 71+ messages in thread
From: Max Gurtovoy @ 2023-01-19 10:21 UTC (permalink / raw)
To: Lei Rao, kbusch, axboe, kch, hch, sagi, alex.williamson, cohuck,
jgg, yishaih, shameerali.kolothum.thodi, kevin.tian, mjrosato,
linux-kernel, linux-nvme, kvm
Cc: eddie.dong, yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
Hi Leo,
On 06/12/2022 7:58, Lei Rao wrote:
> Implement specific VFIO live migration operations for NVMe devices.
>
> Signed-off-by: Lei Rao <lei.rao@intel.com>
> Signed-off-by: Yadong Li <yadong.li@intel.com>
> Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
> Reviewed-by: Eddie Dong <eddie.dong@intel.com>
> Reviewed-by: Hang Yuan <hang.yuan@intel.com>
> ---
> drivers/vfio/pci/nvme/Kconfig | 5 +-
> drivers/vfio/pci/nvme/nvme.c | 543 ++++++++++++++++++++++++++++++++--
> drivers/vfio/pci/nvme/nvme.h | 111 +++++++
> 3 files changed, 637 insertions(+), 22 deletions(-)
> create mode 100644 drivers/vfio/pci/nvme/nvme.h
>
> diff --git a/drivers/vfio/pci/nvme/Kconfig
> b/drivers/vfio/pci/nvme/Kconfig
> index c281fe154007..12e0eaba0de1 100644
> --- a/drivers/vfio/pci/nvme/Kconfig
> +++ b/drivers/vfio/pci/nvme/Kconfig
> @@ -1,9 +1,10 @@
> # SPDX-License-Identifier: GPL-2.0-only
> config NVME_VFIO_PCI
> tristate "VFIO support for NVMe PCI devices"
> + depends on NVME_CORE
> depends on VFIO_PCI_CORE
> help
> - This provides generic VFIO PCI support for NVMe device
> - using the VFIO framework.
> + This provides migration support for NVMe devices using the
> + VFIO framework.
>
> If you don't know what to do here, say N.
> diff --git a/drivers/vfio/pci/nvme/nvme.c b/drivers/vfio/pci/nvme/nvme.c
> index f1386d8a9287..698e470a4e53 100644
> --- a/drivers/vfio/pci/nvme/nvme.c
> +++ b/drivers/vfio/pci/nvme/nvme.c
> @@ -13,29 +13,503 @@
> #include <linux/types.h>
> #include <linux/vfio.h>
> #include <linux/anon_inodes.h>
> -#include <linux/kernel.h>
> -#include <linux/vfio_pci_core.h>
> +
> +#include "nvme.h"
> +
> +#define MAX_MIGRATION_SIZE (256 * 1024)
> +
> +static int nvmevf_cmd_suspend_device(struct nvmevf_pci_core_device
> *nvmevf_dev)
> +{
> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
> + struct nvme_live_mig_command c = { };
> + int ret;
> +
> + c.suspend.opcode = nvme_admin_live_mig_suspend;
> + c.suspend.vf_index = nvmevf_dev->vf_id;
> +
> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL,
> NULL, 0);
> + if (ret) {
> + dev_warn(&dev->dev, "Suspend virtual function failed
> (ret=0x%x)\n", ret);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int nvmevf_cmd_resume_device(struct nvmevf_pci_core_device
> *nvmevf_dev)
> +{
> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
> + struct nvme_live_mig_command c = { };
> + int ret;
> +
> + c.resume.opcode = nvme_admin_live_mig_resume;
> + c.resume.vf_index = nvmevf_dev->vf_id;
> +
> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL,
> NULL, 0);
> + if (ret) {
> + dev_warn(&dev->dev, "Resume virtual function failed
> (ret=0x%x)\n", ret);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int nvmevf_cmd_query_data_size(struct nvmevf_pci_core_device
> *nvmevf_dev,
> + size_t *state_size)
> +{
> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
> + struct nvme_live_mig_command c = { };
> + size_t result;
> + int ret;
> +
> + c.query.opcode = nvme_admin_live_mig_query_data_size;
> + c.query.vf_index = nvmevf_dev->vf_id;
> +
> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, &result,
> NULL, 0);
> + if (ret) {
> + dev_warn(&dev->dev, "Query the states size failed
> (ret=0x%x)\n", ret);
> + *state_size = 0;
> + return ret;
> + }
> + *state_size = result;
> + return 0;
> +}
> +
> +static int nvmevf_cmd_save_data(struct nvmevf_pci_core_device
> *nvmevf_dev,
> + void *buffer, size_t buffer_len)
> +{
> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
> + struct nvme_live_mig_command c = { };
> + int ret;
> +
> + c.save.opcode = nvme_admin_live_mig_save_data;
> + c.save.vf_index = nvmevf_dev->vf_id;
> +
> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL,
> buffer, buffer_len);
> + if (ret) {
> + dev_warn(&dev->dev, "Save the device states failed
> (ret=0x%x)\n", ret);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int nvmevf_cmd_load_data(struct nvmevf_pci_core_device
> *nvmevf_dev,
> + struct nvmevf_migration_file *migf)
> +{
> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
> + struct nvme_live_mig_command c = { };
> + int ret;
> +
> + c.load.opcode = nvme_admin_live_mig_load_data;
> + c.load.vf_index = nvmevf_dev->vf_id;
> + c.load.size = migf->total_length;
> +
> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL,
> + migf->vf_data, migf->total_length);
> + if (ret) {
> + dev_warn(&dev->dev, "Load the device states failed
> (ret=0x%x)\n", ret);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static struct nvmevf_pci_core_device *nvmevf_drvdata(struct pci_dev
> *pdev)
> +{
> + struct vfio_pci_core_device *core_device =
> dev_get_drvdata(&pdev->dev);
> +
> + return container_of(core_device, struct nvmevf_pci_core_device,
> core_device);
> +}
> +
> +static void nvmevf_disable_fd(struct nvmevf_migration_file *migf)
> +{
> + mutex_lock(&migf->lock);
> +
> + /* release the device states buffer */
> + kvfree(migf->vf_data);
> + migf->vf_data = NULL;
> + migf->disabled = true;
> + migf->total_length = 0;
> + migf->filp->f_pos = 0;
> + mutex_unlock(&migf->lock);
> +}
> +
> +static int nvmevf_release_file(struct inode *inode, struct file *filp)
> +{
> + struct nvmevf_migration_file *migf = filp->private_data;
> +
> + nvmevf_disable_fd(migf);
> + mutex_destroy(&migf->lock);
> + kfree(migf);
> + return 0;
> +}
> +
> +static ssize_t nvmevf_save_read(struct file *filp, char __user *buf,
> size_t len, loff_t *pos)
> +{
> + struct nvmevf_migration_file *migf = filp->private_data;
> + ssize_t done = 0;
> + int ret;
> +
> + if (pos)
> + return -ESPIPE;
> + pos = &filp->f_pos;
> +
> + mutex_lock(&migf->lock);
> + if (*pos > migf->total_length) {
> + done = -EINVAL;
> + goto out_unlock;
> + }
> +
> + if (migf->disabled) {
> + done = -EINVAL;
> + goto out_unlock;
> + }
> +
> + len = min_t(size_t, migf->total_length - *pos, len);
> + if (len) {
> + ret = copy_to_user(buf, migf->vf_data + *pos, len);
> + if (ret) {
> + done = -EFAULT;
> + goto out_unlock;
> + }
> + *pos += len;
> + done = len;
> + }
> +
> +out_unlock:
> + mutex_unlock(&migf->lock);
> + return done;
> +}
> +
> +static const struct file_operations nvmevf_save_fops = {
> + .owner = THIS_MODULE,
> + .read = nvmevf_save_read,
> + .release = nvmevf_release_file,
> + .llseek = no_llseek,
> +};
> +
> +static ssize_t nvmevf_resume_write(struct file *filp, const char
> __user *buf,
> + size_t len, loff_t *pos)
> +{
> + struct nvmevf_migration_file *migf = filp->private_data;
> + loff_t requested_length;
> + ssize_t done = 0;
> + int ret;
> +
> + if (pos)
> + return -ESPIPE;
> + pos = &filp->f_pos;
> +
> + if (*pos < 0 || check_add_overflow((loff_t)len, *pos,
> &requested_length))
> + return -EINVAL;
> +
> + if (requested_length > MAX_MIGRATION_SIZE)
> + return -ENOMEM;
> + mutex_lock(&migf->lock);
> + if (migf->disabled) {
> + done = -ENODEV;
> + goto out_unlock;
> + }
> +
> + ret = copy_from_user(migf->vf_data + *pos, buf, len);
> + if (ret) {
> + done = -EFAULT;
> + goto out_unlock;
> + }
> + *pos += len;
> + done = len;
> + migf->total_length += len;
> +
> +out_unlock:
> + mutex_unlock(&migf->lock);
> + return done;
> +}
> +
> +static const struct file_operations nvmevf_resume_fops = {
> + .owner = THIS_MODULE,
> + .write = nvmevf_resume_write,
> + .release = nvmevf_release_file,
> + .llseek = no_llseek,
> +};
> +
> +static void nvmevf_disable_fds(struct nvmevf_pci_core_device
> *nvmevf_dev)
> +{
> + if (nvmevf_dev->resuming_migf) {
> + nvmevf_disable_fd(nvmevf_dev->resuming_migf);
> + fput(nvmevf_dev->resuming_migf->filp);
> + nvmevf_dev->resuming_migf = NULL;
> + }
> +
> + if (nvmevf_dev->saving_migf) {
> + nvmevf_disable_fd(nvmevf_dev->saving_migf);
> + fput(nvmevf_dev->saving_migf->filp);
> + nvmevf_dev->saving_migf = NULL;
> + }
> +}
> +
> +static struct nvmevf_migration_file *
> +nvmevf_pci_resume_device_data(struct nvmevf_pci_core_device *nvmevf_dev)
> +{
> + struct nvmevf_migration_file *migf;
> + int ret;
> +
> + migf = kzalloc(sizeof(*migf), GFP_KERNEL);
> + if (!migf)
> + return ERR_PTR(-ENOMEM);
> +
> + migf->filp = anon_inode_getfile("nvmevf_mig",
> &nvmevf_resume_fops, migf,
> + O_WRONLY);
> + if (IS_ERR(migf->filp)) {
> + int err = PTR_ERR(migf->filp);
> +
> + kfree(migf);
> + return ERR_PTR(err);
> + }
> + stream_open(migf->filp->f_inode, migf->filp);
> + mutex_init(&migf->lock);
> +
> + /* Allocate buffer to load the device states and the max states
> is 256K */
> + migf->vf_data = kvzalloc(MAX_MIGRATION_SIZE, GFP_KERNEL);
> + if (!migf->vf_data) {
> + ret = -ENOMEM;
> + goto out_free;
> + }
> +
> + return migf;
> +
> +out_free:
> + fput(migf->filp);
> + return ERR_PTR(ret);
> +}
> +
> +static struct nvmevf_migration_file *
> +nvmevf_pci_save_device_data(struct nvmevf_pci_core_device *nvmevf_dev)
> +{
> + struct nvmevf_migration_file *migf;
> + int ret;
> +
> + migf = kzalloc(sizeof(*migf), GFP_KERNEL);
> + if (!migf)
> + return ERR_PTR(-ENOMEM);
> +
> + migf->filp = anon_inode_getfile("nvmevf_mig", &nvmevf_save_fops,
> migf,
> + O_RDONLY);
> + if (IS_ERR(migf->filp)) {
> + int err = PTR_ERR(migf->filp);
> +
> + kfree(migf);
> + return ERR_PTR(err);
> + }
> +
> + stream_open(migf->filp->f_inode, migf->filp);
> + mutex_init(&migf->lock);
> +
> + ret = nvmevf_cmd_query_data_size(nvmevf_dev, &migf->total_length);
> + if (ret)
> + goto out_free;
> + /* Allocate buffer and save the device states*/
> + migf->vf_data = kvzalloc(migf->total_length, GFP_KERNEL);
> + if (!migf->vf_data) {
> + ret = -ENOMEM;
> + goto out_free;
> + }
> +
> + ret = nvmevf_cmd_save_data(nvmevf_dev, migf->vf_data,
> migf->total_length);
> + if (ret)
> + goto out_free;
> +
> + return migf;
> +out_free:
> + fput(migf->filp);
> + return ERR_PTR(ret);
> +}
> +
> +static struct file *
> +nvmevf_pci_step_device_state_locked(struct nvmevf_pci_core_device
> *nvmevf_dev, u32 new)
> +{
> + u32 cur = nvmevf_dev->mig_state;
> + int ret;
> +
> + if (cur == VFIO_DEVICE_STATE_RUNNING && new ==
> VFIO_DEVICE_STATE_STOP) {
> + ret = nvmevf_cmd_suspend_device(nvmevf_dev);
> + if (ret)
> + return ERR_PTR(ret);
> + return NULL;
> + }
> +
> + if (cur == VFIO_DEVICE_STATE_STOP && new ==
> VFIO_DEVICE_STATE_STOP_COPY) {
> + struct nvmevf_migration_file *migf;
> +
> + migf = nvmevf_pci_save_device_data(nvmevf_dev);
> + if (IS_ERR(migf))
> + return ERR_CAST(migf);
> + get_file(migf->filp);
> + nvmevf_dev->saving_migf = migf;
> + return migf->filp;
> + }
> +
> + if (cur == VFIO_DEVICE_STATE_STOP_COPY && new ==
> VFIO_DEVICE_STATE_STOP) {
> + nvmevf_disable_fds(nvmevf_dev);
> + return NULL;
> + }
> +
> + if (cur == VFIO_DEVICE_STATE_STOP && new ==
> VFIO_DEVICE_STATE_RESUMING) {
> + struct nvmevf_migration_file *migf;
> +
> + migf = nvmevf_pci_resume_device_data(nvmevf_dev);
> + if (IS_ERR(migf))
> + return ERR_CAST(migf);
> + get_file(migf->filp);
> + nvmevf_dev->resuming_migf = migf;
> + return migf->filp;
> + }
> +
> + if (cur == VFIO_DEVICE_STATE_RESUMING && new ==
> VFIO_DEVICE_STATE_STOP) {
> + ret = nvmevf_cmd_load_data(nvmevf_dev,
> nvmevf_dev->resuming_migf);
> + if (ret)
> + return ERR_PTR(ret);
> + nvmevf_disable_fds(nvmevf_dev);
> + return NULL;
> + }
> +
> + if (cur == VFIO_DEVICE_STATE_STOP && new ==
> VFIO_DEVICE_STATE_RUNNING) {
> + nvmevf_cmd_resume_device(nvmevf_dev);
> + return NULL;
> + }
> +
> + /* vfio_mig_get_next_state() does not use arcs other than the
> above */
> + WARN_ON(true);
> + return ERR_PTR(-EINVAL);
> +}
> +
> +static void nvmevf_state_mutex_unlock(struct nvmevf_pci_core_device
> *nvmevf_dev)
> +{
> +again:
> + spin_lock(&nvmevf_dev->reset_lock);
> + if (nvmevf_dev->deferred_reset) {
> + nvmevf_dev->deferred_reset = false;
> + spin_unlock(&nvmevf_dev->reset_lock);
> + nvmevf_dev->mig_state = VFIO_DEVICE_STATE_RUNNING;
> + nvmevf_disable_fds(nvmevf_dev);
> + goto again;
> + }
> + mutex_unlock(&nvmevf_dev->state_mutex);
> + spin_unlock(&nvmevf_dev->reset_lock);
> +}
> +
> +static struct file *
> +nvmevf_pci_set_device_state(struct vfio_device *vdev, enum
> vfio_device_mig_state new_state)
> +{
> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(vdev,
> + struct nvmevf_pci_core_device, core_device.vdev);
> + enum vfio_device_mig_state next_state;
> + struct file *res = NULL;
> + int ret;
> +
> + mutex_lock(&nvmevf_dev->state_mutex);
> + while (new_state != nvmevf_dev->mig_state) {
> + ret = vfio_mig_get_next_state(vdev, nvmevf_dev->mig_state,
> new_state, &next_state);
> + if (ret) {
> + res = ERR_PTR(-EINVAL);
> + break;
> + }
> +
> + res = nvmevf_pci_step_device_state_locked(nvmevf_dev,
> next_state);
> + if (IS_ERR(res))
> + break;
> + nvmevf_dev->mig_state = next_state;
> + if (WARN_ON(res && new_state != nvmevf_dev->mig_state)) {
> + fput(res);
> + res = ERR_PTR(-EINVAL);
> + break;
> + }
> + }
> + nvmevf_state_mutex_unlock(nvmevf_dev);
> + return res;
> +}
> +
> +static int nvmevf_pci_get_device_state(struct vfio_device *vdev,
> + enum vfio_device_mig_state *curr_state)
> +{
> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(
> + vdev, struct nvmevf_pci_core_device, core_device.vdev);
> +
> + mutex_lock(&nvmevf_dev->state_mutex);
> + *curr_state = nvmevf_dev->mig_state;
> + nvmevf_state_mutex_unlock(nvmevf_dev);
> + return 0;
> +}
>
> static int nvmevf_pci_open_device(struct vfio_device *core_vdev)
> {
> - struct vfio_pci_core_device *vdev =
> - container_of(core_vdev, struct vfio_pci_core_device, vdev);
> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(
> + core_vdev, struct nvmevf_pci_core_device, core_device.vdev);
> + struct vfio_pci_core_device *vdev = &nvmevf_dev->core_device;
> int ret;
>
> ret = vfio_pci_core_enable(vdev);
> if (ret)
> return ret;
>
> + if (nvmevf_dev->migrate_cap)
> + nvmevf_dev->mig_state = VFIO_DEVICE_STATE_RUNNING;
> vfio_pci_core_finish_enable(vdev);
> return 0;
> }
>
> +static void nvmevf_cmd_close_migratable(struct nvmevf_pci_core_device
> *nvmevf_dev)
> +{
> + if (!nvmevf_dev->migrate_cap)
> + return;
> +
> + mutex_lock(&nvmevf_dev->state_mutex);
> + nvmevf_disable_fds(nvmevf_dev);
> + nvmevf_state_mutex_unlock(nvmevf_dev);
> +}
> +
> +static void nvmevf_pci_close_device(struct vfio_device *core_vdev)
> +{
> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(
> + core_vdev, struct nvmevf_pci_core_device, core_device.vdev);
> +
> + nvmevf_cmd_close_migratable(nvmevf_dev);
> + vfio_pci_core_close_device(core_vdev);
> +}
> +
> +static const struct vfio_migration_ops nvmevf_pci_mig_ops = {
> + .migration_set_state = nvmevf_pci_set_device_state,
> + .migration_get_state = nvmevf_pci_get_device_state,
> +};
> +
> +static int nvmevf_migration_init_dev(struct vfio_device *core_vdev)
> +{
> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(core_vdev,
> + struct nvmevf_pci_core_device, core_device.vdev);
> + struct pci_dev *pdev = to_pci_dev(core_vdev->dev);
> + int vf_id;
> + int ret = -1;
> +
> + if (!pdev->is_virtfn)
> + return ret;
> +
> + nvmevf_dev->migrate_cap = 1;
> +
> + vf_id = pci_iov_vf_id(pdev);
> + if (vf_id < 0)
> + return ret;
> + nvmevf_dev->vf_id = vf_id + 1;
> + core_vdev->migration_flags = VFIO_MIGRATION_STOP_COPY;
> +
> + mutex_init(&nvmevf_dev->state_mutex);
> + spin_lock_init(&nvmevf_dev->reset_lock);
> + core_vdev->mig_ops = &nvmevf_pci_mig_ops;
> +
> + return vfio_pci_core_init_dev(core_vdev);
> +}
> +
> static const struct vfio_device_ops nvmevf_pci_ops = {
> .name = "nvme-vfio-pci",
> - .init = vfio_pci_core_init_dev,
> + .init = nvmevf_migration_init_dev,
> .release = vfio_pci_core_release_dev,
> .open_device = nvmevf_pci_open_device,
> - .close_device = vfio_pci_core_close_device,
> + .close_device = nvmevf_pci_close_device,
> .ioctl = vfio_pci_core_ioctl,
> .device_feature = vfio_pci_core_ioctl_feature,
> .read = vfio_pci_core_read,
> @@ -47,32 +521,56 @@ static const struct vfio_device_ops
> nvmevf_pci_ops = {
>
> static int nvmevf_pci_probe(struct pci_dev *pdev, const struct
> pci_device_id *id)
> {
> - struct vfio_pci_core_device *vdev;
> + struct nvmevf_pci_core_device *nvmevf_dev;
> int ret;
>
> - vdev = vfio_alloc_device(vfio_pci_core_device, vdev, &pdev->dev,
> - &nvmevf_pci_ops);
> - if (IS_ERR(vdev))
> - return PTR_ERR(vdev);
> + nvmevf_dev = vfio_alloc_device(nvmevf_pci_core_device,
> core_device.vdev,
> + &pdev->dev, &nvmevf_pci_ops);
> + if (IS_ERR(nvmevf_dev))
> + return PTR_ERR(nvmevf_dev);
>
> - dev_set_drvdata(&pdev->dev, vdev);
> - ret = vfio_pci_core_register_device(vdev);
> + dev_set_drvdata(&pdev->dev, &nvmevf_dev->core_device);
> + ret = vfio_pci_core_register_device(&nvmevf_dev->core_device);
> if (ret)
> goto out_put_dev;
> -
> return 0;
>
> out_put_dev:
> - vfio_put_device(&vdev->vdev);
> + vfio_put_device(&nvmevf_dev->core_device.vdev);
> return ret;
> +
> }
>
> static void nvmevf_pci_remove(struct pci_dev *pdev)
> {
> - struct vfio_pci_core_device *vdev = dev_get_drvdata(&pdev->dev);
> + struct nvmevf_pci_core_device *nvmevf_dev = nvmevf_drvdata(pdev);
> +
> + vfio_pci_core_unregister_device(&nvmevf_dev->core_device);
> + vfio_put_device(&nvmevf_dev->core_device.vdev);
> +}
> +
> +static void nvmevf_pci_aer_reset_done(struct pci_dev *pdev)
> +{
> + struct nvmevf_pci_core_device *nvmevf_dev = nvmevf_drvdata(pdev);
> +
> + if (!nvmevf_dev->migrate_cap)
> + return;
>
> - vfio_pci_core_unregister_device(vdev);
> - vfio_put_device(&vdev->vdev);
> + /*
> + * As the higher VFIO layers are holding locks across reset and
> using
> + * those same locks with the mm_lock we need to prevent ABBA
> deadlock
> + * with the state_mutex and mm_lock.
> + * In case the state_mutex was taken already we defer the cleanup
> work
> + * to the unlock flow of the other running context.
> + */
> + spin_lock(&nvmevf_dev->reset_lock);
> + nvmevf_dev->deferred_reset = true;
> + if (!mutex_trylock(&nvmevf_dev->state_mutex)) {
> + spin_unlock(&nvmevf_dev->reset_lock);
> + return;
> + }
> + spin_unlock(&nvmevf_dev->reset_lock);
> + nvmevf_state_mutex_unlock(nvmevf_dev);
> }
>
> static const struct pci_device_id nvmevf_pci_table[] = {
> @@ -83,12 +581,17 @@ static const struct pci_device_id
> nvmevf_pci_table[] = {
>
> MODULE_DEVICE_TABLE(pci, nvmevf_pci_table);
>
> +static const struct pci_error_handlers nvmevf_err_handlers = {
> + .reset_done = nvmevf_pci_aer_reset_done,
> + .error_detected = vfio_pci_core_aer_err_detected,
> +};
> +
> static struct pci_driver nvmevf_pci_driver = {
> .name = KBUILD_MODNAME,
> .id_table = nvmevf_pci_table,
> .probe = nvmevf_pci_probe,
> .remove = nvmevf_pci_remove,
> - .err_handler = &vfio_pci_core_err_handlers,
> + .err_handler = &nvmevf_err_handlers,
> .driver_managed_dma = true,
> };
>
> @@ -96,4 +599,4 @@ module_pci_driver(nvmevf_pci_driver);
>
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Lei Rao <lei.rao@intel.com>");
> -MODULE_DESCRIPTION("NVMe VFIO PCI - Generic VFIO PCI driver for NVMe");
> +MODULE_DESCRIPTION("NVMe VFIO PCI - VFIO PCI driver with live
> migration support for NVMe");
> diff --git a/drivers/vfio/pci/nvme/nvme.h b/drivers/vfio/pci/nvme/nvme.h
> new file mode 100644
> index 000000000000..c8464554ef53
> --- /dev/null
> +++ b/drivers/vfio/pci/nvme/nvme.h
> @@ -0,0 +1,111 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2022, INTEL CORPORATION. All rights reserved
> + */
> +
> +#ifndef NVME_VFIO_PCI_H
> +#define NVME_VFIO_PCI_H
> +
> +#include <linux/kernel.h>
> +#include <linux/vfio_pci_core.h>
> +#include <linux/nvme.h>
> +
> +struct nvme_live_mig_query_size {
> + __u8 opcode;
> + __u8 flags;
> + __u16 command_id;
> + __u32 rsvd1[9];
> + __u16 vf_index;
> + __u16 rsvd2;
> + __u32 rsvd3[5];
> +};
> +
> +struct nvme_live_mig_suspend {
> + __u8 opcode;
> + __u8 flags;
> + __u16 command_id;
> + __u32 rsvd1[9];
> + __u16 vf_index;
> + __u16 rsvd2;
> + __u32 rsvd3[5];
> +};
> +
> +struct nvme_live_mig_resume {
> + __u8 opcode;
> + __u8 flags;
> + __u16 command_id;
> + __u32 rsvd1[9];
> + __u16 vf_index;
> + __u16 rsvd2;
> + __u32 rsvd3[5];
> +};
> +
> +struct nvme_live_mig_save_data {
> + __u8 opcode;
> + __u8 flags;
> + __u16 command_id;
> + __u32 rsvd1[5];
> + __le64 prp1;
> + __le64 prp2;
> + __u16 vf_index;
> + __u16 rsvd2;
> + __u32 rsvd3[5];
> +};
Just noticed that the save_data (similar to READ operation) doesn't have
size/length member.
How does it work for you ?
BTW,
Are you doing iterative reads from the device to get the state ?
> +
> +struct nvme_live_mig_load_data {
> + __u8 opcode;
> + __u8 flags;
> + __u16 command_id;
> + __u32 rsvd1[5];
> + __le64 prp1;
> + __le64 prp2;
> + __u16 vf_index;
> + __u16 rsvd2;
> + __u32 size;
> + __u32 rsvd3[4];
> +};
> +
> +enum nvme_live_mig_admin_opcode {
> + nvme_admin_live_mig_query_data_size = 0xC4,
> + nvme_admin_live_mig_suspend = 0xC8,
> + nvme_admin_live_mig_resume = 0xCC,
> + nvme_admin_live_mig_save_data = 0xD2,
> + nvme_admin_live_mig_load_data = 0xD5,
> +};
> +
> +struct nvme_live_mig_command {
> + union {
> + struct nvme_live_mig_query_size query;
> + struct nvme_live_mig_suspend suspend;
> + struct nvme_live_mig_resume resume;
> + struct nvme_live_mig_save_data save;
> + struct nvme_live_mig_load_data load;
> + };
> +};
> +
> +struct nvmevf_migration_file {
> + struct file *filp;
> + struct mutex lock;
> + bool disabled;
> + u8 *vf_data;
> + size_t total_length;
> +};
> +
> +struct nvmevf_pci_core_device {
> + struct vfio_pci_core_device core_device;
> + int vf_id;
> + u8 migrate_cap:1;
> + u8 deferred_reset:1;
> + /* protect migration state */
> + struct mutex state_mutex;
> + enum vfio_device_mig_state mig_state;
> + /* protect the reset_done flow */
> + spinlock_t reset_lock;
> + struct nvmevf_migration_file *resuming_migf;
> + struct nvmevf_migration_file *saving_migf;
> +};
> +
> +extern int nvme_submit_vf_cmd(struct pci_dev *dev, struct
> nvme_command *cmd,
> + size_t *result, void *buffer, unsigned int bufflen);
> +
> +#endif /* NVME_VFIO_PCI_H */
^ permalink raw reply [flat|nested] 71+ messages in thread
* Re: [RFC PATCH 3/5] nvme-vfio: enable the function of VFIO live migration.
2023-01-19 10:21 ` Max Gurtovoy
@ 2023-02-09 9:09 ` Rao, Lei
0 siblings, 0 replies; 71+ messages in thread
From: Rao, Lei @ 2023-02-09 9:09 UTC (permalink / raw)
To: Max Gurtovoy, kbusch, axboe, kch, hch, sagi, alex.williamson,
cohuck, jgg, yishaih, shameerali.kolothum.thodi, kevin.tian,
mjrosato, linux-kernel, linux-nvme, kvm
Cc: eddie.dong, yadong.li, yi.l.liu, Konrad.wilk, stephen, hang.yuan
On 1/19/2023 6:21 PM, Max Gurtovoy wrote:
> Hi Leo,
>
> On 06/12/2022 7:58, Lei Rao wrote:
>> Implement specific VFIO live migration operations for NVMe devices.
>>
>> Signed-off-by: Lei Rao <lei.rao@intel.com>
>> Signed-off-by: Yadong Li <yadong.li@intel.com>
>> Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
>> Reviewed-by: Eddie Dong <eddie.dong@intel.com>
>> Reviewed-by: Hang Yuan <hang.yuan@intel.com>
>> ---
>> drivers/vfio/pci/nvme/Kconfig | 5 +-
>> drivers/vfio/pci/nvme/nvme.c | 543 ++++++++++++++++++++++++++++++++--
>> drivers/vfio/pci/nvme/nvme.h | 111 +++++++
>> 3 files changed, 637 insertions(+), 22 deletions(-)
>> create mode 100644 drivers/vfio/pci/nvme/nvme.h
>>
>> diff --git a/drivers/vfio/pci/nvme/Kconfig b/drivers/vfio/pci/nvme/Kconfig
>> index c281fe154007..12e0eaba0de1 100644
>> --- a/drivers/vfio/pci/nvme/Kconfig
>> +++ b/drivers/vfio/pci/nvme/Kconfig
>> @@ -1,9 +1,10 @@
>> # SPDX-License-Identifier: GPL-2.0-only
>> config NVME_VFIO_PCI
>> tristate "VFIO support for NVMe PCI devices"
>> + depends on NVME_CORE
>> depends on VFIO_PCI_CORE
>> help
>> - This provides generic VFIO PCI support for NVMe device
>> - using the VFIO framework.
>> + This provides migration support for NVMe devices using the
>> + VFIO framework.
>>
>> If you don't know what to do here, say N.
>> diff --git a/drivers/vfio/pci/nvme/nvme.c b/drivers/vfio/pci/nvme/nvme.c
>> index f1386d8a9287..698e470a4e53 100644
>> --- a/drivers/vfio/pci/nvme/nvme.c
>> +++ b/drivers/vfio/pci/nvme/nvme.c
>> @@ -13,29 +13,503 @@
>> #include <linux/types.h>
>> #include <linux/vfio.h>
>> #include <linux/anon_inodes.h>
>> -#include <linux/kernel.h>
>> -#include <linux/vfio_pci_core.h>
>> +
>> +#include "nvme.h"
>> +
>> +#define MAX_MIGRATION_SIZE (256 * 1024)
>> +
>> +static int nvmevf_cmd_suspend_device(struct nvmevf_pci_core_device *nvmevf_dev)
>> +{
>> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
>> + struct nvme_live_mig_command c = { };
>> + int ret;
>> +
>> + c.suspend.opcode = nvme_admin_live_mig_suspend;
>> + c.suspend.vf_index = nvmevf_dev->vf_id;
>> +
>> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL, NULL, 0);
>> + if (ret) {
>> + dev_warn(&dev->dev, "Suspend virtual function failed (ret=0x%x)\n", ret);
>> + return ret;
>> + }
>> + return 0;
>> +}
>> +
>> +static int nvmevf_cmd_resume_device(struct nvmevf_pci_core_device *nvmevf_dev)
>> +{
>> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
>> + struct nvme_live_mig_command c = { };
>> + int ret;
>> +
>> + c.resume.opcode = nvme_admin_live_mig_resume;
>> + c.resume.vf_index = nvmevf_dev->vf_id;
>> +
>> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL, NULL, 0);
>> + if (ret) {
>> + dev_warn(&dev->dev, "Resume virtual function failed (ret=0x%x)\n", ret);
>> + return ret;
>> + }
>> + return 0;
>> +}
>> +
>> +static int nvmevf_cmd_query_data_size(struct nvmevf_pci_core_device *nvmevf_dev,
>> + size_t *state_size)
>> +{
>> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
>> + struct nvme_live_mig_command c = { };
>> + size_t result;
>> + int ret;
>> +
>> + c.query.opcode = nvme_admin_live_mig_query_data_size;
>> + c.query.vf_index = nvmevf_dev->vf_id;
>> +
>> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, &result, NULL, 0);
>> + if (ret) {
>> + dev_warn(&dev->dev, "Query the states size failed (ret=0x%x)\n", ret);
>> + *state_size = 0;
>> + return ret;
>> + }
>> + *state_size = result;
>> + return 0;
>> +}
>> +
>> +static int nvmevf_cmd_save_data(struct nvmevf_pci_core_device *nvmevf_dev,
>> + void *buffer, size_t buffer_len)
>> +{
>> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
>> + struct nvme_live_mig_command c = { };
>> + int ret;
>> +
>> + c.save.opcode = nvme_admin_live_mig_save_data;
>> + c.save.vf_index = nvmevf_dev->vf_id;
>> +
>> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL, buffer, buffer_len);
>> + if (ret) {
>> + dev_warn(&dev->dev, "Save the device states failed (ret=0x%x)\n", ret);
>> + return ret;
>> + }
>> + return 0;
>> +}
>> +
>> +static int nvmevf_cmd_load_data(struct nvmevf_pci_core_device *nvmevf_dev,
>> + struct nvmevf_migration_file *migf)
>> +{
>> + struct pci_dev *dev = nvmevf_dev->core_device.pdev;
>> + struct nvme_live_mig_command c = { };
>> + int ret;
>> +
>> + c.load.opcode = nvme_admin_live_mig_load_data;
>> + c.load.vf_index = nvmevf_dev->vf_id;
>> + c.load.size = migf->total_length;
>> +
>> + ret = nvme_submit_vf_cmd(dev, (struct nvme_command *)&c, NULL,
>> + migf->vf_data, migf->total_length);
>> + if (ret) {
>> + dev_warn(&dev->dev, "Load the device states failed (ret=0x%x)\n", ret);
>> + return ret;
>> + }
>> + return 0;
>> +}
>> +
>> +static struct nvmevf_pci_core_device *nvmevf_drvdata(struct pci_dev *pdev)
>> +{
>> + struct vfio_pci_core_device *core_device = dev_get_drvdata(&pdev->dev);
>> +
>> + return container_of(core_device, struct nvmevf_pci_core_device, core_device);
>> +}
>> +
>> +static void nvmevf_disable_fd(struct nvmevf_migration_file *migf)
>> +{
>> + mutex_lock(&migf->lock);
>> +
>> + /* release the device states buffer */
>> + kvfree(migf->vf_data);
>> + migf->vf_data = NULL;
>> + migf->disabled = true;
>> + migf->total_length = 0;
>> + migf->filp->f_pos = 0;
>> + mutex_unlock(&migf->lock);
>> +}
>> +
>> +static int nvmevf_release_file(struct inode *inode, struct file *filp)
>> +{
>> + struct nvmevf_migration_file *migf = filp->private_data;
>> +
>> + nvmevf_disable_fd(migf);
>> + mutex_destroy(&migf->lock);
>> + kfree(migf);
>> + return 0;
>> +}
>> +
>> +static ssize_t nvmevf_save_read(struct file *filp, char __user *buf, size_t len, loff_t *pos)
>> +{
>> + struct nvmevf_migration_file *migf = filp->private_data;
>> + ssize_t done = 0;
>> + int ret;
>> +
>> + if (pos)
>> + return -ESPIPE;
>> + pos = &filp->f_pos;
>> +
>> + mutex_lock(&migf->lock);
>> + if (*pos > migf->total_length) {
>> + done = -EINVAL;
>> + goto out_unlock;
>> + }
>> +
>> + if (migf->disabled) {
>> + done = -EINVAL;
>> + goto out_unlock;
>> + }
>> +
>> + len = min_t(size_t, migf->total_length - *pos, len);
>> + if (len) {
>> + ret = copy_to_user(buf, migf->vf_data + *pos, len);
>> + if (ret) {
>> + done = -EFAULT;
>> + goto out_unlock;
>> + }
>> + *pos += len;
>> + done = len;
>> + }
>> +
>> +out_unlock:
>> + mutex_unlock(&migf->lock);
>> + return done;
>> +}
>> +
>> +static const struct file_operations nvmevf_save_fops = {
>> + .owner = THIS_MODULE,
>> + .read = nvmevf_save_read,
>> + .release = nvmevf_release_file,
>> + .llseek = no_llseek,
>> +};
>> +
>> +static ssize_t nvmevf_resume_write(struct file *filp, const char __user *buf,
>> + size_t len, loff_t *pos)
>> +{
>> + struct nvmevf_migration_file *migf = filp->private_data;
>> + loff_t requested_length;
>> + ssize_t done = 0;
>> + int ret;
>> +
>> + if (pos)
>> + return -ESPIPE;
>> + pos = &filp->f_pos;
>> +
>> + if (*pos < 0 || check_add_overflow((loff_t)len, *pos, &requested_length))
>> + return -EINVAL;
>> +
>> + if (requested_length > MAX_MIGRATION_SIZE)
>> + return -ENOMEM;
>> + mutex_lock(&migf->lock);
>> + if (migf->disabled) {
>> + done = -ENODEV;
>> + goto out_unlock;
>> + }
>> +
>> + ret = copy_from_user(migf->vf_data + *pos, buf, len);
>> + if (ret) {
>> + done = -EFAULT;
>> + goto out_unlock;
>> + }
>> + *pos += len;
>> + done = len;
>> + migf->total_length += len;
>> +
>> +out_unlock:
>> + mutex_unlock(&migf->lock);
>> + return done;
>> +}
>> +
>> +static const struct file_operations nvmevf_resume_fops = {
>> + .owner = THIS_MODULE,
>> + .write = nvmevf_resume_write,
>> + .release = nvmevf_release_file,
>> + .llseek = no_llseek,
>> +};
>> +
>> +static void nvmevf_disable_fds(struct nvmevf_pci_core_device *nvmevf_dev)
>> +{
>> + if (nvmevf_dev->resuming_migf) {
>> + nvmevf_disable_fd(nvmevf_dev->resuming_migf);
>> + fput(nvmevf_dev->resuming_migf->filp);
>> + nvmevf_dev->resuming_migf = NULL;
>> + }
>> +
>> + if (nvmevf_dev->saving_migf) {
>> + nvmevf_disable_fd(nvmevf_dev->saving_migf);
>> + fput(nvmevf_dev->saving_migf->filp);
>> + nvmevf_dev->saving_migf = NULL;
>> + }
>> +}
>> +
>> +static struct nvmevf_migration_file *
>> +nvmevf_pci_resume_device_data(struct nvmevf_pci_core_device *nvmevf_dev)
>> +{
>> + struct nvmevf_migration_file *migf;
>> + int ret;
>> +
>> + migf = kzalloc(sizeof(*migf), GFP_KERNEL);
>> + if (!migf)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + migf->filp = anon_inode_getfile("nvmevf_mig", &nvmevf_resume_fops, migf,
>> + O_WRONLY);
>> + if (IS_ERR(migf->filp)) {
>> + int err = PTR_ERR(migf->filp);
>> +
>> + kfree(migf);
>> + return ERR_PTR(err);
>> + }
>> + stream_open(migf->filp->f_inode, migf->filp);
>> + mutex_init(&migf->lock);
>> +
>> + /* Allocate buffer to load the device states and the max states is 256K */
>> + migf->vf_data = kvzalloc(MAX_MIGRATION_SIZE, GFP_KERNEL);
>> + if (!migf->vf_data) {
>> + ret = -ENOMEM;
>> + goto out_free;
>> + }
>> +
>> + return migf;
>> +
>> +out_free:
>> + fput(migf->filp);
>> + return ERR_PTR(ret);
>> +}
>> +
>> +static struct nvmevf_migration_file *
>> +nvmevf_pci_save_device_data(struct nvmevf_pci_core_device *nvmevf_dev)
>> +{
>> + struct nvmevf_migration_file *migf;
>> + int ret;
>> +
>> + migf = kzalloc(sizeof(*migf), GFP_KERNEL);
>> + if (!migf)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + migf->filp = anon_inode_getfile("nvmevf_mig", &nvmevf_save_fops, migf,
>> + O_RDONLY);
>> + if (IS_ERR(migf->filp)) {
>> + int err = PTR_ERR(migf->filp);
>> +
>> + kfree(migf);
>> + return ERR_PTR(err);
>> + }
>> +
>> + stream_open(migf->filp->f_inode, migf->filp);
>> + mutex_init(&migf->lock);
>> +
>> + ret = nvmevf_cmd_query_data_size(nvmevf_dev, &migf->total_length);
>> + if (ret)
>> + goto out_free;
>> + /* Allocate buffer and save the device states*/
>> + migf->vf_data = kvzalloc(migf->total_length, GFP_KERNEL);
>> + if (!migf->vf_data) {
>> + ret = -ENOMEM;
>> + goto out_free;
>> + }
>> +
>> + ret = nvmevf_cmd_save_data(nvmevf_dev, migf->vf_data, migf->total_length);
>> + if (ret)
>> + goto out_free;
>> +
>> + return migf;
>> +out_free:
>> + fput(migf->filp);
>> + return ERR_PTR(ret);
>> +}
>> +
>> +static struct file *
>> +nvmevf_pci_step_device_state_locked(struct nvmevf_pci_core_device *nvmevf_dev, u32 new)
>> +{
>> + u32 cur = nvmevf_dev->mig_state;
>> + int ret;
>> +
>> + if (cur == VFIO_DEVICE_STATE_RUNNING && new == VFIO_DEVICE_STATE_STOP) {
>> + ret = nvmevf_cmd_suspend_device(nvmevf_dev);
>> + if (ret)
>> + return ERR_PTR(ret);
>> + return NULL;
>> + }
>> +
>> + if (cur == VFIO_DEVICE_STATE_STOP && new == VFIO_DEVICE_STATE_STOP_COPY) {
>> + struct nvmevf_migration_file *migf;
>> +
>> + migf = nvmevf_pci_save_device_data(nvmevf_dev);
>> + if (IS_ERR(migf))
>> + return ERR_CAST(migf);
>> + get_file(migf->filp);
>> + nvmevf_dev->saving_migf = migf;
>> + return migf->filp;
>> + }
>> +
>> + if (cur == VFIO_DEVICE_STATE_STOP_COPY && new == VFIO_DEVICE_STATE_STOP) {
>> + nvmevf_disable_fds(nvmevf_dev);
>> + return NULL;
>> + }
>> +
>> + if (cur == VFIO_DEVICE_STATE_STOP && new == VFIO_DEVICE_STATE_RESUMING) {
>> + struct nvmevf_migration_file *migf;
>> +
>> + migf = nvmevf_pci_resume_device_data(nvmevf_dev);
>> + if (IS_ERR(migf))
>> + return ERR_CAST(migf);
>> + get_file(migf->filp);
>> + nvmevf_dev->resuming_migf = migf;
>> + return migf->filp;
>> + }
>> +
>> + if (cur == VFIO_DEVICE_STATE_RESUMING && new == VFIO_DEVICE_STATE_STOP) {
>> + ret = nvmevf_cmd_load_data(nvmevf_dev, nvmevf_dev->resuming_migf);
>> + if (ret)
>> + return ERR_PTR(ret);
>> + nvmevf_disable_fds(nvmevf_dev);
>> + return NULL;
>> + }
>> +
>> + if (cur == VFIO_DEVICE_STATE_STOP && new == VFIO_DEVICE_STATE_RUNNING) {
>> + nvmevf_cmd_resume_device(nvmevf_dev);
>> + return NULL;
>> + }
>> +
>> + /* vfio_mig_get_next_state() does not use arcs other than the above */
>> + WARN_ON(true);
>> + return ERR_PTR(-EINVAL);
>> +}
>> +
>> +static void nvmevf_state_mutex_unlock(struct nvmevf_pci_core_device *nvmevf_dev)
>> +{
>> +again:
>> + spin_lock(&nvmevf_dev->reset_lock);
>> + if (nvmevf_dev->deferred_reset) {
>> + nvmevf_dev->deferred_reset = false;
>> + spin_unlock(&nvmevf_dev->reset_lock);
>> + nvmevf_dev->mig_state = VFIO_DEVICE_STATE_RUNNING;
>> + nvmevf_disable_fds(nvmevf_dev);
>> + goto again;
>> + }
>> + mutex_unlock(&nvmevf_dev->state_mutex);
>> + spin_unlock(&nvmevf_dev->reset_lock);
>> +}
>> +
>> +static struct file *
>> +nvmevf_pci_set_device_state(struct vfio_device *vdev, enum vfio_device_mig_state new_state)
>> +{
>> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(vdev,
>> + struct nvmevf_pci_core_device, core_device.vdev);
>> + enum vfio_device_mig_state next_state;
>> + struct file *res = NULL;
>> + int ret;
>> +
>> + mutex_lock(&nvmevf_dev->state_mutex);
>> + while (new_state != nvmevf_dev->mig_state) {
>> + ret = vfio_mig_get_next_state(vdev, nvmevf_dev->mig_state, new_state, &next_state);
>> + if (ret) {
>> + res = ERR_PTR(-EINVAL);
>> + break;
>> + }
>> +
>> + res = nvmevf_pci_step_device_state_locked(nvmevf_dev, next_state);
>> + if (IS_ERR(res))
>> + break;
>> + nvmevf_dev->mig_state = next_state;
>> + if (WARN_ON(res && new_state != nvmevf_dev->mig_state)) {
>> + fput(res);
>> + res = ERR_PTR(-EINVAL);
>> + break;
>> + }
>> + }
>> + nvmevf_state_mutex_unlock(nvmevf_dev);
>> + return res;
>> +}
>> +
>> +static int nvmevf_pci_get_device_state(struct vfio_device *vdev,
>> + enum vfio_device_mig_state *curr_state)
>> +{
>> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(
>> + vdev, struct nvmevf_pci_core_device, core_device.vdev);
>> +
>> + mutex_lock(&nvmevf_dev->state_mutex);
>> + *curr_state = nvmevf_dev->mig_state;
>> + nvmevf_state_mutex_unlock(nvmevf_dev);
>> + return 0;
>> +}
>>
>> static int nvmevf_pci_open_device(struct vfio_device *core_vdev)
>> {
>> - struct vfio_pci_core_device *vdev =
>> - container_of(core_vdev, struct vfio_pci_core_device, vdev);
>> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(
>> + core_vdev, struct nvmevf_pci_core_device, core_device.vdev);
>> + struct vfio_pci_core_device *vdev = &nvmevf_dev->core_device;
>> int ret;
>>
>> ret = vfio_pci_core_enable(vdev);
>> if (ret)
>> return ret;
>>
>> + if (nvmevf_dev->migrate_cap)
>> + nvmevf_dev->mig_state = VFIO_DEVICE_STATE_RUNNING;
>> vfio_pci_core_finish_enable(vdev);
>> return 0;
>> }
>>
>> +static void nvmevf_cmd_close_migratable(struct nvmevf_pci_core_device *nvmevf_dev)
>> +{
>> + if (!nvmevf_dev->migrate_cap)
>> + return;
>> +
>> + mutex_lock(&nvmevf_dev->state_mutex);
>> + nvmevf_disable_fds(nvmevf_dev);
>> + nvmevf_state_mutex_unlock(nvmevf_dev);
>> +}
>> +
>> +static void nvmevf_pci_close_device(struct vfio_device *core_vdev)
>> +{
>> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(
>> + core_vdev, struct nvmevf_pci_core_device, core_device.vdev);
>> +
>> + nvmevf_cmd_close_migratable(nvmevf_dev);
>> + vfio_pci_core_close_device(core_vdev);
>> +}
>> +
>> +static const struct vfio_migration_ops nvmevf_pci_mig_ops = {
>> + .migration_set_state = nvmevf_pci_set_device_state,
>> + .migration_get_state = nvmevf_pci_get_device_state,
>> +};
>> +
>> +static int nvmevf_migration_init_dev(struct vfio_device *core_vdev)
>> +{
>> + struct nvmevf_pci_core_device *nvmevf_dev = container_of(core_vdev,
>> + struct nvmevf_pci_core_device, core_device.vdev);
>> + struct pci_dev *pdev = to_pci_dev(core_vdev->dev);
>> + int vf_id;
>> + int ret = -1;
>> +
>> + if (!pdev->is_virtfn)
>> + return ret;
>> +
>> + nvmevf_dev->migrate_cap = 1;
>> +
>> + vf_id = pci_iov_vf_id(pdev);
>> + if (vf_id < 0)
>> + return ret;
>> + nvmevf_dev->vf_id = vf_id + 1;
>> + core_vdev->migration_flags = VFIO_MIGRATION_STOP_COPY;
>> +
>> + mutex_init(&nvmevf_dev->state_mutex);
>> + spin_lock_init(&nvmevf_dev->reset_lock);
>> + core_vdev->mig_ops = &nvmevf_pci_mig_ops;
>> +
>> + return vfio_pci_core_init_dev(core_vdev);
>> +}
>> +
>> static const struct vfio_device_ops nvmevf_pci_ops = {
>> .name = "nvme-vfio-pci",
>> - .init = vfio_pci_core_init_dev,
>> + .init = nvmevf_migration_init_dev,
>> .release = vfio_pci_core_release_dev,
>> .open_device = nvmevf_pci_open_device,
>> - .close_device = vfio_pci_core_close_device,
>> + .close_device = nvmevf_pci_close_device,
>> .ioctl = vfio_pci_core_ioctl,
>> .device_feature = vfio_pci_core_ioctl_feature,
>> .read = vfio_pci_core_read,
>> @@ -47,32 +521,56 @@ static const struct vfio_device_ops nvmevf_pci_ops = {
>>
>> static int nvmevf_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>> {
>> - struct vfio_pci_core_device *vdev;
>> + struct nvmevf_pci_core_device *nvmevf_dev;
>> int ret;
>>
>> - vdev = vfio_alloc_device(vfio_pci_core_device, vdev, &pdev->dev,
>> - &nvmevf_pci_ops);
>> - if (IS_ERR(vdev))
>> - return PTR_ERR(vdev);
>> + nvmevf_dev = vfio_alloc_device(nvmevf_pci_core_device, core_device.vdev,
>> + &pdev->dev, &nvmevf_pci_ops);
>> + if (IS_ERR(nvmevf_dev))
>> + return PTR_ERR(nvmevf_dev);
>>
>> - dev_set_drvdata(&pdev->dev, vdev);
>> - ret = vfio_pci_core_register_device(vdev);
>> + dev_set_drvdata(&pdev->dev, &nvmevf_dev->core_device);
>> + ret = vfio_pci_core_register_device(&nvmevf_dev->core_device);
>> if (ret)
>> goto out_put_dev;
>> -
>> return 0;
>>
>> out_put_dev:
>> - vfio_put_device(&vdev->vdev);
>> + vfio_put_device(&nvmevf_dev->core_device.vdev);
>> return ret;
>> +
>> }
>>
>> static void nvmevf_pci_remove(struct pci_dev *pdev)
>> {
>> - struct vfio_pci_core_device *vdev = dev_get_drvdata(&pdev->dev);
>> + struct nvmevf_pci_core_device *nvmevf_dev = nvmevf_drvdata(pdev);
>> +
>> + vfio_pci_core_unregister_device(&nvmevf_dev->core_device);
>> + vfio_put_device(&nvmevf_dev->core_device.vdev);
>> +}
>> +
>> +static void nvmevf_pci_aer_reset_done(struct pci_dev *pdev)
>> +{
>> + struct nvmevf_pci_core_device *nvmevf_dev = nvmevf_drvdata(pdev);
>> +
>> + if (!nvmevf_dev->migrate_cap)
>> + return;
>>
>> - vfio_pci_core_unregister_device(vdev);
>> - vfio_put_device(&vdev->vdev);
>> + /*
>> + * As the higher VFIO layers are holding locks across reset and using
>> + * those same locks with the mm_lock we need to prevent ABBA deadlock
>> + * with the state_mutex and mm_lock.
>> + * In case the state_mutex was taken already we defer the cleanup work
>> + * to the unlock flow of the other running context.
>> + */
>> + spin_lock(&nvmevf_dev->reset_lock);
>> + nvmevf_dev->deferred_reset = true;
>> + if (!mutex_trylock(&nvmevf_dev->state_mutex)) {
>> + spin_unlock(&nvmevf_dev->reset_lock);
>> + return;
>> + }
>> + spin_unlock(&nvmevf_dev->reset_lock);
>> + nvmevf_state_mutex_unlock(nvmevf_dev);
>> }
>>
>> static const struct pci_device_id nvmevf_pci_table[] = {
>> @@ -83,12 +581,17 @@ static const struct pci_device_id nvmevf_pci_table[] = {
>>
>> MODULE_DEVICE_TABLE(pci, nvmevf_pci_table);
>>
>> +static const struct pci_error_handlers nvmevf_err_handlers = {
>> + .reset_done = nvmevf_pci_aer_reset_done,
>> + .error_detected = vfio_pci_core_aer_err_detected,
>> +};
>> +
>> static struct pci_driver nvmevf_pci_driver = {
>> .name = KBUILD_MODNAME,
>> .id_table = nvmevf_pci_table,
>> .probe = nvmevf_pci_probe,
>> .remove = nvmevf_pci_remove,
>> - .err_handler = &vfio_pci_core_err_handlers,
>> + .err_handler = &nvmevf_err_handlers,
>> .driver_managed_dma = true,
>> };
>>
>> @@ -96,4 +599,4 @@ module_pci_driver(nvmevf_pci_driver);
>>
>> MODULE_LICENSE("GPL");
>> MODULE_AUTHOR("Lei Rao <lei.rao@intel.com>");
>> -MODULE_DESCRIPTION("NVMe VFIO PCI - Generic VFIO PCI driver for NVMe");
>> +MODULE_DESCRIPTION("NVMe VFIO PCI - VFIO PCI driver with live migration support for NVMe");
>> diff --git a/drivers/vfio/pci/nvme/nvme.h b/drivers/vfio/pci/nvme/nvme.h
>> new file mode 100644
>> index 000000000000..c8464554ef53
>> --- /dev/null
>> +++ b/drivers/vfio/pci/nvme/nvme.h
>> @@ -0,0 +1,111 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2022, INTEL CORPORATION. All rights reserved
>> + */
>> +
>> +#ifndef NVME_VFIO_PCI_H
>> +#define NVME_VFIO_PCI_H
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/vfio_pci_core.h>
>> +#include <linux/nvme.h>
>> +
>> +struct nvme_live_mig_query_size {
>> + __u8 opcode;
>> + __u8 flags;
>> + __u16 command_id;
>> + __u32 rsvd1[9];
>> + __u16 vf_index;
>> + __u16 rsvd2;
>> + __u32 rsvd3[5];
>> +};
>> +
>> +struct nvme_live_mig_suspend {
>> + __u8 opcode;
>> + __u8 flags;
>> + __u16 command_id;
>> + __u32 rsvd1[9];
>> + __u16 vf_index;
>> + __u16 rsvd2;
>> + __u32 rsvd3[5];
>> +};
>> +
>> +struct nvme_live_mig_resume {
>> + __u8 opcode;
>> + __u8 flags;
>> + __u16 command_id;
>> + __u32 rsvd1[9];
>> + __u16 vf_index;
>> + __u16 rsvd2;
>> + __u32 rsvd3[5];
>> +};
>> +
>> +struct nvme_live_mig_save_data {
>> + __u8 opcode;
>> + __u8 flags;
>> + __u16 command_id;
>> + __u32 rsvd1[5];
>> + __le64 prp1;
>> + __le64 prp2;
>> + __u16 vf_index;
>> + __u16 rsvd2;
>> + __u32 rsvd3[5];
>> +};
>
> Just noticed that the save_data (similar to READ operation) doesn't have size/length member.
> How does it work for you ?
Sorry for late reply due to the CNY.
Before the save_data, it will send the Query command to get the data size, and then the driver
will allocate the data buffer used to receive the device state through DMA. That means both the
controller and Host driver know the device state's size.
>
> BTW,
>
> Are you doing iterative reads from the device to get the state ?
Yes, in theory, iterative reads are needed.
The size of the device state is related to the number of queue pairs.
For NVMe, the states of one queue pair that needs to be migrated should have only dozens of bytes.
As we know, NVMe can support a maximum number of 64K IO queues, but the actual hardware
can support far less than 64K queues. Therefore, without considering DMA dirty pages, the size
of the device state is small. Practically one read should be able to retrieve all the device states.
Actually, this is also related to maximum data transfer size (MDTS). If the device state size
exceeds MDTS, it must be read iteratively. If needed, we can add a command field to support iteration.
Lei.
>
>> +
>> +struct nvme_live_mig_load_data {
>> + __u8 opcode;
>> + __u8 flags;
>> + __u16 command_id;
>> + __u32 rsvd1[5];
>> + __le64 prp1;
>> + __le64 prp2;
>> + __u16 vf_index;
>> + __u16 rsvd2;
>> + __u32 size;
>> + __u32 rsvd3[4];
>> +};
>> +
>> +enum nvme_live_mig_admin_opcode {
>> + nvme_admin_live_mig_query_data_size = 0xC4,
>> + nvme_admin_live_mig_suspend = 0xC8,
>> + nvme_admin_live_mig_resume = 0xCC,
>> + nvme_admin_live_mig_save_data = 0xD2,
>> + nvme_admin_live_mig_load_data = 0xD5,
>> +};
>> +
>> +struct nvme_live_mig_command {
>> + union {
>> + struct nvme_live_mig_query_size query;
>> + struct nvme_live_mig_suspend suspend;
>> + struct nvme_live_mig_resume resume;
>> + struct nvme_live_mig_save_data save;
>> + struct nvme_live_mig_load_data load;
>> + };
>> +};
>> +
>> +struct nvmevf_migration_file {
>> + struct file *filp;
>> + struct mutex lock;
>> + bool disabled;
>> + u8 *vf_data;
>> + size_t total_length;
>> +};
>> +
>> +struct nvmevf_pci_core_device {
>> + struct vfio_pci_core_device core_device;
>> + int vf_id;
>> + u8 migrate_cap:1;
>> + u8 deferred_reset:1;
>> + /* protect migration state */
>> + struct mutex state_mutex;
>> + enum vfio_device_mig_state mig_state;
>> + /* protect the reset_done flow */
>> + spinlock_t reset_lock;
>> + struct nvmevf_migration_file *resuming_migf;
>> + struct nvmevf_migration_file *saving_migf;
>> +};
>> +
>> +extern int nvme_submit_vf_cmd(struct pci_dev *dev, struct nvme_command *cmd,
>> + size_t *result, void *buffer, unsigned int bufflen);
>> +
>> +#endif /* NVME_VFIO_PCI_H */
^ permalink raw reply [flat|nested] 71+ messages in thread
end of thread, other threads:[~2023-02-09 9:09 UTC | newest]
Thread overview: 71+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-06 5:58 [RFC PATCH 0/5] Add new VFIO PCI driver for NVMe devices Lei Rao
2022-12-06 5:58 ` [RFC PATCH 1/5] nvme-pci: add function nvme_submit_vf_cmd to issue admin commands for VF driver Lei Rao
2022-12-06 6:19 ` Christoph Hellwig
2022-12-06 13:44 ` Jason Gunthorpe
2022-12-06 13:51 ` Keith Busch
2022-12-06 14:27 ` Jason Gunthorpe
2022-12-06 13:58 ` Christoph Hellwig
2022-12-06 15:22 ` Jason Gunthorpe
2022-12-06 15:38 ` Christoph Hellwig
2022-12-06 15:51 ` Jason Gunthorpe
2022-12-06 16:55 ` Christoph Hellwig
2022-12-06 19:15 ` Jason Gunthorpe
2022-12-07 2:30 ` Max Gurtovoy
2022-12-07 7:58 ` Christoph Hellwig
2022-12-09 2:11 ` Tian, Kevin
2022-12-12 7:41 ` Christoph Hellwig
2022-12-07 7:54 ` Christoph Hellwig
2022-12-07 10:59 ` Max Gurtovoy
2022-12-07 13:46 ` Christoph Hellwig
2022-12-07 14:50 ` Max Gurtovoy
2022-12-07 16:35 ` Christoph Hellwig
2022-12-07 13:34 ` Jason Gunthorpe
2022-12-07 13:52 ` Christoph Hellwig
2022-12-07 15:07 ` Jason Gunthorpe
2022-12-07 16:38 ` Christoph Hellwig
2022-12-07 17:31 ` Jason Gunthorpe
2022-12-07 18:33 ` Christoph Hellwig
2022-12-07 20:08 ` Jason Gunthorpe
2022-12-09 2:50 ` Tian, Kevin
2022-12-09 18:56 ` Dong, Eddie
2022-12-11 11:39 ` Max Gurtovoy
2022-12-12 7:55 ` Christoph Hellwig
2022-12-12 14:49 ` Max Gurtovoy
2022-12-12 7:50 ` Christoph Hellwig
2022-12-13 14:01 ` Jason Gunthorpe
2022-12-13 16:08 ` Christoph Hellwig
2022-12-13 17:49 ` Jason Gunthorpe
2022-12-06 7:00 ` kernel test robot
2022-12-06 9:01 ` kernel test robot
2022-12-06 5:58 ` [RFC PATCH 2/5] nvme-vfio: add new vfio-pci driver for NVMe device Lei Rao
2022-12-06 5:58 ` [RFC PATCH 3/5] nvme-vfio: enable the function of VFIO live migration Lei Rao
2023-01-19 10:21 ` Max Gurtovoy
2023-02-09 9:09 ` Rao, Lei
2022-12-06 5:58 ` [RFC PATCH 4/5] nvme-vfio: check if the hardware supports " Lei Rao
2022-12-06 13:47 ` Keith Busch
2022-12-06 5:58 ` [RFC PATCH 5/5] nvme-vfio: Add a document for the NVMe device Lei Rao
2022-12-06 6:26 ` Christoph Hellwig
2022-12-06 13:05 ` Jason Gunthorpe
2022-12-06 13:09 ` Christoph Hellwig
2022-12-06 13:52 ` Jason Gunthorpe
2022-12-06 14:00 ` Christoph Hellwig
2022-12-06 14:20 ` Jason Gunthorpe
2022-12-06 14:31 ` Christoph Hellwig
2022-12-06 14:48 ` Jason Gunthorpe
2022-12-06 15:01 ` Christoph Hellwig
2022-12-06 15:28 ` Jason Gunthorpe
2022-12-06 15:35 ` Christoph Hellwig
2022-12-06 18:00 ` Dong, Eddie
2022-12-12 7:57 ` Christoph Hellwig
2022-12-11 12:05 ` Max Gurtovoy
2022-12-11 13:21 ` Rao, Lei
2022-12-11 14:51 ` Max Gurtovoy
2022-12-12 1:20 ` Rao, Lei
2022-12-12 8:09 ` Christoph Hellwig
2022-12-09 2:05 ` Tian, Kevin
2022-12-09 16:53 ` Li, Yadong
2022-12-12 8:11 ` Christoph Hellwig
2022-12-07 22:42 ` Jonathan Derrick
2022-12-07 22:54 ` Chaitanya Kulkarni
2022-12-08 0:03 ` Keith Busch
2022-12-08 5:39 ` Chaitanya Kulkarni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.