* [PATCH v2 0/4] dt-bindings: display/msm: convert MDP5 schema to YAML format
@ 2022-12-08 0:54 ` Dmitry Baryshkov
0 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
This patch concludes the conversion of display/msm schema from txt files
to YAML format.
The per-SoC compat (new addition) is required to ease migrating platform
support between mdp5 and dpu drivers.
Changes since v1:
- Renamed mdp@ to display-controller@ in the example (Krzysztof)
- Extended ports description to mention possible ports (Krzysztof)
- Fixed ports@ regexp to limit to just four ports (Krzysztof)
- Included patches adding per-SoC compat strings to the schema and to
dtsi files.
Dmitry Baryshkov (4):
dt-bindings: display/msm: convert MDP5 schema to YAML format
dt-bindings: display/msm: add SoC-specific compats to qcom,mdp5.yaml
ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 node
arm64: dts: qcom: add SoC specific compat strings to mdp5 nodes
.../devicetree/bindings/display/msm/mdp5.txt | 132 ---------------
.../bindings/display/msm/qcom,mdp5.yaml | 155 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm660.dtsi | 2 +
7 files changed, 161 insertions(+), 136 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp5.txt
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
--
2.35.1
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 0/4] dt-bindings: display/msm: convert MDP5 schema to YAML format
@ 2022-12-08 0:54 ` Dmitry Baryshkov
0 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, linux-arm-msm, dri-devel, Stephen Boyd, freedreno
This patch concludes the conversion of display/msm schema from txt files
to YAML format.
The per-SoC compat (new addition) is required to ease migrating platform
support between mdp5 and dpu drivers.
Changes since v1:
- Renamed mdp@ to display-controller@ in the example (Krzysztof)
- Extended ports description to mention possible ports (Krzysztof)
- Fixed ports@ regexp to limit to just four ports (Krzysztof)
- Included patches adding per-SoC compat strings to the schema and to
dtsi files.
Dmitry Baryshkov (4):
dt-bindings: display/msm: convert MDP5 schema to YAML format
dt-bindings: display/msm: add SoC-specific compats to qcom,mdp5.yaml
ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 node
arm64: dts: qcom: add SoC specific compat strings to mdp5 nodes
.../devicetree/bindings/display/msm/mdp5.txt | 132 ---------------
.../bindings/display/msm/qcom,mdp5.yaml | 155 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm660.dtsi | 2 +
7 files changed, 161 insertions(+), 136 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp5.txt
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
--
2.35.1
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 1/4] dt-bindings: display/msm: convert MDP5 schema to YAML format
2022-12-08 0:54 ` Dmitry Baryshkov
@ 2022-12-08 0:54 ` Dmitry Baryshkov
-1 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
Convert the mdp5.txt into the yaml format. Changes to the existing (txt) schema:
- MSM8996 has additional "iommu" clock, define it separately
- Add new properties used on some of platforms:
- interconnects, interconnect-names
- iommus
- power-domains
- operating-points-v2, opp-table
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../devicetree/bindings/display/msm/mdp5.txt | 132 -----------------
.../bindings/display/msm/qcom,mdp5.yaml | 138 ++++++++++++++++++
2 files changed, 138 insertions(+), 132 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp5.txt
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
deleted file mode 100644
index 65d03c58dee6..000000000000
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-Qualcomm adreno/snapdragon MDP5 display controller
-
-Description:
-
-This is the bindings documentation for the MDP5 display
-controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
-
-MDP5:
-Required properties:
-- compatible:
- * "qcom,mdp5" - MDP5
-- reg: Physical base address and length of the controller's registers.
-- reg-names: The names of register regions. The following regions are required:
- * "mdp_phys"
-- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
-- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-- * "bus"
-- * "iface"
-- * "core"
-- * "vsync"
-- ports: contains the list of output ports from MDP. These connect to interfaces
- that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
- special case since it is a part of the MDP block itself).
-
- Each output port contains an endpoint that describes how it is connected to an
- external interface. These are described by the standard properties documented
- here:
- Documentation/devicetree/bindings/graph.txt
- Documentation/devicetree/bindings/media/video-interfaces.txt
-
- The availability of output ports can vary across SoC revisions:
-
- For MSM8974 and APQ8084:
- Port 0 -> MDP_INTF0 (eDP)
- Port 1 -> MDP_INTF1 (DSI1)
- Port 2 -> MDP_INTF2 (DSI2)
- Port 3 -> MDP_INTF3 (HDMI)
-
- For MSM8916:
- Port 0 -> MDP_INTF1 (DSI1)
-
- For MSM8994 and MSM8996:
- Port 0 -> MDP_INTF1 (DSI1)
- Port 1 -> MDP_INTF2 (DSI2)
- Port 2 -> MDP_INTF3 (HDMI)
-
-Optional properties:
-- clock-names: the following clocks are optional:
- * "lut"
- * "tbu"
- * "tbu_rt"
-
-Example:
-
-/ {
- ...
-
- mdss: mdss@1a00000 {
- compatible = "qcom,mdss";
- reg = <0x1a00000 0x1000>,
- <0x1ac8000 0x3000>;
- reg-names = "mdss_phys", "vbif_phys";
-
- power-domains = <&gcc MDSS_GDSC>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "vsync"
-
- interrupts = <0 72 0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mdp: mdp@1a01000 {
- compatible = "qcom,mdp5";
- reg = <0x1a01000 0x90000>;
- reg-names = "mdp_phys";
-
- interrupt-parent = <&mdss>;
- interrupts = <0 0>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_MDP_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "core",
- "vsync";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdp5_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
- };
- };
-
- dsi0: dsi@1a98000 {
- ...
- ports {
- ...
- port@0 {
- reg = <0>;
- dsi0_in: endpoint {
- remote-endpoint = <&mdp5_intf1_out>;
- };
- };
- ...
- };
- ...
- };
-
- dsi_phy0: dsi-phy@1a98300 {
- ...
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
new file mode 100644
index 000000000000..cbcbe8b47e9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5)
+
+description: >
+ MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994
+ and MSM8996.
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+properties:
+ compatible:
+ const: qcom,mdp5
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: mdp_phys
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 4
+ maxItems: 7
+
+ clock-names:
+ oneOf:
+ - minItems: 4
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+ - const: lut
+ - const: tbu
+ - const: tbu_rt
+ #MSM8996 has additional iommu clock
+ - items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: iommu
+ - const: vsync
+
+ interconnects:
+ minItems: 1
+ items:
+ - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+ - description: Interconnect path from mdp1 port to the data bus
+ - description: Interconnect path from rotator port to the data bus
+
+ interconnect-names:
+ minItems: 1
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+ - const: rotator-mem
+
+ iommus:
+ items:
+ - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc. MDP5 devices support up to 4 ports::
+ one or two DSI ports, HDMI and eDP.
+
+ patternProperties:
+ "^port@[0-3]+$":
+ $ref: /schemas/graph.yaml#/properties/port
+
+ # at least one port is required
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ display-controller@1a01000 {
+ compatible = "qcom,mdp5";
+ reg = <0x1a01000 0x90000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+...
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 1/4] dt-bindings: display/msm: convert MDP5 schema to YAML format
@ 2022-12-08 0:54 ` Dmitry Baryshkov
0 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, linux-arm-msm, dri-devel, Stephen Boyd, freedreno
Convert the mdp5.txt into the yaml format. Changes to the existing (txt) schema:
- MSM8996 has additional "iommu" clock, define it separately
- Add new properties used on some of platforms:
- interconnects, interconnect-names
- iommus
- power-domains
- operating-points-v2, opp-table
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../devicetree/bindings/display/msm/mdp5.txt | 132 -----------------
.../bindings/display/msm/qcom,mdp5.yaml | 138 ++++++++++++++++++
2 files changed, 138 insertions(+), 132 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp5.txt
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
deleted file mode 100644
index 65d03c58dee6..000000000000
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-Qualcomm adreno/snapdragon MDP5 display controller
-
-Description:
-
-This is the bindings documentation for the MDP5 display
-controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
-
-MDP5:
-Required properties:
-- compatible:
- * "qcom,mdp5" - MDP5
-- reg: Physical base address and length of the controller's registers.
-- reg-names: The names of register regions. The following regions are required:
- * "mdp_phys"
-- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
-- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-- * "bus"
-- * "iface"
-- * "core"
-- * "vsync"
-- ports: contains the list of output ports from MDP. These connect to interfaces
- that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
- special case since it is a part of the MDP block itself).
-
- Each output port contains an endpoint that describes how it is connected to an
- external interface. These are described by the standard properties documented
- here:
- Documentation/devicetree/bindings/graph.txt
- Documentation/devicetree/bindings/media/video-interfaces.txt
-
- The availability of output ports can vary across SoC revisions:
-
- For MSM8974 and APQ8084:
- Port 0 -> MDP_INTF0 (eDP)
- Port 1 -> MDP_INTF1 (DSI1)
- Port 2 -> MDP_INTF2 (DSI2)
- Port 3 -> MDP_INTF3 (HDMI)
-
- For MSM8916:
- Port 0 -> MDP_INTF1 (DSI1)
-
- For MSM8994 and MSM8996:
- Port 0 -> MDP_INTF1 (DSI1)
- Port 1 -> MDP_INTF2 (DSI2)
- Port 2 -> MDP_INTF3 (HDMI)
-
-Optional properties:
-- clock-names: the following clocks are optional:
- * "lut"
- * "tbu"
- * "tbu_rt"
-
-Example:
-
-/ {
- ...
-
- mdss: mdss@1a00000 {
- compatible = "qcom,mdss";
- reg = <0x1a00000 0x1000>,
- <0x1ac8000 0x3000>;
- reg-names = "mdss_phys", "vbif_phys";
-
- power-domains = <&gcc MDSS_GDSC>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "vsync"
-
- interrupts = <0 72 0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mdp: mdp@1a01000 {
- compatible = "qcom,mdp5";
- reg = <0x1a01000 0x90000>;
- reg-names = "mdp_phys";
-
- interrupt-parent = <&mdss>;
- interrupts = <0 0>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_MDP_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "core",
- "vsync";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdp5_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
- };
- };
-
- dsi0: dsi@1a98000 {
- ...
- ports {
- ...
- port@0 {
- reg = <0>;
- dsi0_in: endpoint {
- remote-endpoint = <&mdp5_intf1_out>;
- };
- };
- ...
- };
- ...
- };
-
- dsi_phy0: dsi-phy@1a98300 {
- ...
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
new file mode 100644
index 000000000000..cbcbe8b47e9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5)
+
+description: >
+ MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994
+ and MSM8996.
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+properties:
+ compatible:
+ const: qcom,mdp5
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: mdp_phys
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 4
+ maxItems: 7
+
+ clock-names:
+ oneOf:
+ - minItems: 4
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+ - const: lut
+ - const: tbu
+ - const: tbu_rt
+ #MSM8996 has additional iommu clock
+ - items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: iommu
+ - const: vsync
+
+ interconnects:
+ minItems: 1
+ items:
+ - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+ - description: Interconnect path from mdp1 port to the data bus
+ - description: Interconnect path from rotator port to the data bus
+
+ interconnect-names:
+ minItems: 1
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+ - const: rotator-mem
+
+ iommus:
+ items:
+ - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc. MDP5 devices support up to 4 ports::
+ one or two DSI ports, HDMI and eDP.
+
+ patternProperties:
+ "^port@[0-3]+$":
+ $ref: /schemas/graph.yaml#/properties/port
+
+ # at least one port is required
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ display-controller@1a01000 {
+ compatible = "qcom,mdp5";
+ reg = <0x1a01000 0x90000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+...
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 2/4] dt-bindings: display/msm: add SoC-specific compats to qcom,mdp5.yaml
2022-12-08 0:54 ` Dmitry Baryshkov
@ 2022-12-08 0:54 ` Dmitry Baryshkov
-1 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
Add platform-specific compatible entries to the qcom,mdp5.yaml to allow
distinguishing between various platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../bindings/display/msm/qcom,mdp5.yaml | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
index cbcbe8b47e9b..a7a97a4c46b4 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -16,7 +16,24 @@ maintainers:
properties:
compatible:
- const: qcom,mdp5
+ oneOf:
+ - const: qcom,mdp5
+ deprecated: true
+ - items:
+ - enum:
+ # msm8998 should either use old single-string compat or new
+ # qcom,msm8998-dpu
+ - qcom,apq8084-mdp5
+ - qcom,msm8916-mdp5
+ - qcom,msm8917-mdp5
+ - qcom,msm8953-mdp5
+ - qcom,msm8974-mdp5
+ - qcom,msm8976-mdp5
+ - qcom,msm8994-mdp5
+ - qcom,msm8996-mdp5
+ - qcom,sdm630-mdp5
+ - qcom,sdm660-mdp5
+ - const: qcom,mdp5
reg:
maxItems: 1
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 2/4] dt-bindings: display/msm: add SoC-specific compats to qcom, mdp5.yaml
@ 2022-12-08 0:54 ` Dmitry Baryshkov
0 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, linux-arm-msm, dri-devel, Stephen Boyd, freedreno
Add platform-specific compatible entries to the qcom,mdp5.yaml to allow
distinguishing between various platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../bindings/display/msm/qcom,mdp5.yaml | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
index cbcbe8b47e9b..a7a97a4c46b4 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -16,7 +16,24 @@ maintainers:
properties:
compatible:
- const: qcom,mdp5
+ oneOf:
+ - const: qcom,mdp5
+ deprecated: true
+ - items:
+ - enum:
+ # msm8998 should either use old single-string compat or new
+ # qcom,msm8998-dpu
+ - qcom,apq8084-mdp5
+ - qcom,msm8916-mdp5
+ - qcom,msm8917-mdp5
+ - qcom,msm8953-mdp5
+ - qcom,msm8974-mdp5
+ - qcom,msm8976-mdp5
+ - qcom,msm8994-mdp5
+ - qcom,msm8996-mdp5
+ - qcom,sdm630-mdp5
+ - qcom,sdm660-mdp5
+ - const: qcom,mdp5
reg:
maxItems: 1
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 3/4] ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 node
2022-12-08 0:54 ` Dmitry Baryshkov
@ 2022-12-08 0:54 ` Dmitry Baryshkov
-1 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
Add SoC-specific compat string to the MDP5 device node to ease
distinguishing between various platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 8d216a3c0851..0cd59088f9c7 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1549,7 +1549,7 @@ mdss: mdss@fd900000 {
ranges;
mdp: mdp@fd900000 {
- compatible = "qcom,mdp5";
+ compatible = "qcom,msm8974-mdp5", "qcom,mdp5";
reg = <0xfd900100 0x22000>;
reg-names = "mdp_phys";
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 3/4] ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 node
@ 2022-12-08 0:54 ` Dmitry Baryshkov
0 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, linux-arm-msm, dri-devel, Stephen Boyd, freedreno
Add SoC-specific compat string to the MDP5 device node to ease
distinguishing between various platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 8d216a3c0851..0cd59088f9c7 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1549,7 +1549,7 @@ mdss: mdss@fd900000 {
ranges;
mdp: mdp@fd900000 {
- compatible = "qcom,mdp5";
+ compatible = "qcom,msm8974-mdp5", "qcom,mdp5";
reg = <0xfd900100 0x22000>;
reg-names = "mdp_phys";
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 4/4] arm64: dts: qcom: add SoC specific compat strings to mdp5 nodes
2022-12-08 0:54 ` Dmitry Baryshkov
@ 2022-12-08 0:54 ` Dmitry Baryshkov
-1 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
Add SoC-specific compat string to the MDP5 device nodes to ease
distinguishing between various platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm660.dtsi | 2 ++
4 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 2ca8e977fc2a..0a23fb6efae8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -989,7 +989,7 @@ mdss: mdss@1a00000 {
ranges;
mdp: mdp@1a01000 {
- compatible = "qcom,mdp5";
+ compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
reg = <0x01a01000 0x89000>;
reg-names = "mdp_phys";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index d31464204f69..b5cd1bcad5eb 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -931,7 +931,7 @@ mdss: mdss@900000 {
status = "disabled";
mdp: mdp@901000 {
- compatible = "qcom,mdp5";
+ compatible = "qcom,msm8996-mdp5", "qcom,mdp5";
reg = <0x00901000 0x90000>;
reg-names = "mdp_phys";
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 13e6a4fbba27..65addd4c672e 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1498,7 +1498,7 @@ mdss: mdss@c900000 {
status = "disabled";
mdp: mdp@c901000 {
- compatible = "qcom,mdp5";
+ compatible = "qcom,sdm630-mdp5", "qcom,mdp5";
reg = <0x0c901000 0x89000>;
reg-names = "mdp_phys";
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index d52123cb5cd3..cdaa0d7a66f3 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -142,6 +142,8 @@ &gpucc {
};
&mdp {
+ compatible = "qcom,sdm660-mdp5", "qcom,mdp5";
+
ports {
port@1 {
reg = <1>;
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 4/4] arm64: dts: qcom: add SoC specific compat strings to mdp5 nodes
@ 2022-12-08 0:54 ` Dmitry Baryshkov
0 siblings, 0 replies; 14+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 0:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, linux-arm-msm, dri-devel, Stephen Boyd, freedreno
Add SoC-specific compat string to the MDP5 device nodes to ease
distinguishing between various platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm660.dtsi | 2 ++
4 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 2ca8e977fc2a..0a23fb6efae8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -989,7 +989,7 @@ mdss: mdss@1a00000 {
ranges;
mdp: mdp@1a01000 {
- compatible = "qcom,mdp5";
+ compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
reg = <0x01a01000 0x89000>;
reg-names = "mdp_phys";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index d31464204f69..b5cd1bcad5eb 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -931,7 +931,7 @@ mdss: mdss@900000 {
status = "disabled";
mdp: mdp@901000 {
- compatible = "qcom,mdp5";
+ compatible = "qcom,msm8996-mdp5", "qcom,mdp5";
reg = <0x00901000 0x90000>;
reg-names = "mdp_phys";
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 13e6a4fbba27..65addd4c672e 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1498,7 +1498,7 @@ mdss: mdss@c900000 {
status = "disabled";
mdp: mdp@c901000 {
- compatible = "qcom,mdp5";
+ compatible = "qcom,sdm630-mdp5", "qcom,mdp5";
reg = <0x0c901000 0x89000>;
reg-names = "mdp_phys";
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index d52123cb5cd3..cdaa0d7a66f3 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -142,6 +142,8 @@ &gpucc {
};
&mdp {
+ compatible = "qcom,sdm660-mdp5", "qcom,mdp5";
+
ports {
port@1 {
reg = <1>;
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v2 1/4] dt-bindings: display/msm: convert MDP5 schema to YAML format
2022-12-08 0:54 ` Dmitry Baryshkov
@ 2022-12-09 8:35 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2022-12-09 8:35 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Clark, Sean Paul, Abhinav Kumar, Rob Herring,
Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
On 08/12/2022 01:54, Dmitry Baryshkov wrote:
> Convert the mdp5.txt into the yaml format. Changes to the existing (txt) schema:
> - MSM8996 has additional "iommu" clock, define it separately
> - Add new properties used on some of platforms:
> - interconnects, interconnect-names
> - iommus
> - power-domains
> - operating-points-v2, opp-table
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 1/4] dt-bindings: display/msm: convert MDP5 schema to YAML format
@ 2022-12-09 8:35 ` Krzysztof Kozlowski
0 siblings, 0 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2022-12-09 8:35 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Clark, Sean Paul, Abhinav Kumar, Rob Herring,
Krzysztof Kozlowski
Cc: devicetree, linux-arm-msm, dri-devel, Stephen Boyd, freedreno
On 08/12/2022 01:54, Dmitry Baryshkov wrote:
> Convert the mdp5.txt into the yaml format. Changes to the existing (txt) schema:
> - MSM8996 has additional "iommu" clock, define it separately
> - Add new properties used on some of platforms:
> - interconnects, interconnect-names
> - iommus
> - power-domains
> - operating-points-v2, opp-table
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/4] dt-bindings: display/msm: add SoC-specific compats to qcom,mdp5.yaml
2022-12-08 0:54 ` [PATCH v2 2/4] dt-bindings: display/msm: add SoC-specific compats to qcom, mdp5.yaml Dmitry Baryshkov
@ 2022-12-09 8:36 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2022-12-09 8:36 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Clark, Sean Paul, Abhinav Kumar, Rob Herring,
Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
On 08/12/2022 01:54, Dmitry Baryshkov wrote:
> Add platform-specific compatible entries to the qcom,mdp5.yaml to allow
> distinguishing between various platforms.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> .../bindings/display/msm/qcom,mdp5.yaml | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
> index cbcbe8b47e9b..a7a97a4c46b4 100644
> --- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
> @@ -16,7 +16,24 @@ maintainers:
>
> properties:
> compatible:
> - const: qcom,mdp5
> + oneOf:
> + - const: qcom,mdp5
> + deprecated: true
> + - items:
> + - enum:
> + # msm8998 should either use old single-string compat or new
There is no msm8998 in the list, so what is "new". I propose to use the
new, bu tyou need to add it below.
> + # qcom,msm8998-dpu
> + - qcom,apq8084-mdp5
> + - qcom,msm8916-mdp5
> + - qcom,msm8917-mdp5
> + - qcom,msm8953-mdp5
> + - qcom,msm8974-mdp5
> + - qcom,msm8976-mdp5
> + - qcom,msm8994-mdp5
> + - qcom,msm8996-mdp5
> + - qcom,sdm630-mdp5
> + - qcom,sdm660-mdp5
> + - const: qcom,mdp5
>
> reg:
> maxItems: 1
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/4] dt-bindings: display/msm: add SoC-specific compats to qcom,mdp5.yaml
@ 2022-12-09 8:36 ` Krzysztof Kozlowski
0 siblings, 0 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2022-12-09 8:36 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Clark, Sean Paul, Abhinav Kumar, Rob Herring,
Krzysztof Kozlowski
Cc: devicetree, linux-arm-msm, dri-devel, Stephen Boyd, freedreno
On 08/12/2022 01:54, Dmitry Baryshkov wrote:
> Add platform-specific compatible entries to the qcom,mdp5.yaml to allow
> distinguishing between various platforms.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> .../bindings/display/msm/qcom,mdp5.yaml | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
> index cbcbe8b47e9b..a7a97a4c46b4 100644
> --- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
> @@ -16,7 +16,24 @@ maintainers:
>
> properties:
> compatible:
> - const: qcom,mdp5
> + oneOf:
> + - const: qcom,mdp5
> + deprecated: true
> + - items:
> + - enum:
> + # msm8998 should either use old single-string compat or new
There is no msm8998 in the list, so what is "new". I propose to use the
new, bu tyou need to add it below.
> + # qcom,msm8998-dpu
> + - qcom,apq8084-mdp5
> + - qcom,msm8916-mdp5
> + - qcom,msm8917-mdp5
> + - qcom,msm8953-mdp5
> + - qcom,msm8974-mdp5
> + - qcom,msm8976-mdp5
> + - qcom,msm8994-mdp5
> + - qcom,msm8996-mdp5
> + - qcom,sdm630-mdp5
> + - qcom,sdm660-mdp5
> + - const: qcom,mdp5
>
> reg:
> maxItems: 1
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2022-12-09 8:36 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-08 0:54 [PATCH v2 0/4] dt-bindings: display/msm: convert MDP5 schema to YAML format Dmitry Baryshkov
2022-12-08 0:54 ` Dmitry Baryshkov
2022-12-08 0:54 ` [PATCH v2 1/4] " Dmitry Baryshkov
2022-12-08 0:54 ` Dmitry Baryshkov
2022-12-09 8:35 ` Krzysztof Kozlowski
2022-12-09 8:35 ` Krzysztof Kozlowski
2022-12-08 0:54 ` [PATCH v2 2/4] dt-bindings: display/msm: add SoC-specific compats to qcom,mdp5.yaml Dmitry Baryshkov
2022-12-08 0:54 ` [PATCH v2 2/4] dt-bindings: display/msm: add SoC-specific compats to qcom, mdp5.yaml Dmitry Baryshkov
2022-12-09 8:36 ` [PATCH v2 2/4] dt-bindings: display/msm: add SoC-specific compats to qcom,mdp5.yaml Krzysztof Kozlowski
2022-12-09 8:36 ` Krzysztof Kozlowski
2022-12-08 0:54 ` [PATCH v2 3/4] ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 node Dmitry Baryshkov
2022-12-08 0:54 ` Dmitry Baryshkov
2022-12-08 0:54 ` [PATCH v2 4/4] arm64: dts: qcom: add SoC specific compat strings to mdp5 nodes Dmitry Baryshkov
2022-12-08 0:54 ` Dmitry Baryshkov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.