[PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Kunihiko Hayashi]

This series introduces dt-bindings documents for miscellaneous register
blocks implemented in Socionext UniPhier SoCs.

These are previously defined in the devicetree and used in the examples
of subnodes' dt-bindings, however, not documented.

These include two types of the blocks

* independent block including miscellaneous registers and functions for
  the whole SoC (system controller and SoC-glue logic)

* sideband logic including control registers in the component (others)

And prior to adding these dt-bindings, fix examples in the existing
dt-bindings.

This series is part of the previous series shown below:
https://lore.kernel.org/linux-arm-kernel/20221107103410.3443-2-hayashi.kunihiko@socionext.com

Changes since v2:
- Drop redundant nodes in examples (clock, reset, soc-glue-debug)
- Drop parent node in examples
- Add more properties to examples for pinctrl
- Add a patch for regulator change
- Use consistent quotes
- Drop unit address patterns of patternProperties
- Mandatory unit address pattern for efuse (soc-glue-debug)
- Fix additionalProperties (ahci-glue)

Changes since v1:
- Fix examples in the existing dt-bindings (Add PATCH 1-7)
- Add dt-bindings for SoC-glue logic debug part (Add PATCH 10)
- Drop generic and ld6b compatible strings
- Change "usb-controller" node in soc-glue to "usb-hub"
- Change "usb-controller" node in USB glue layer example to "usb"
- Add negation of child properties by compatible string

Kunihiko Hayashi (17):
  dt-bindings: clock: Fix node descriptions in uniphier-clock example
  dt-bindings: reset: Fix node descriptions in uniphier-reset example
  dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl
    example
  dt-bindings: regulator: Fix node descriptions in uniphier-regulator
    example
  dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example
  dt-bindings: thermal: Fix node descriptions in uniphier-thermal
    example
  dt-bindings: phy: Fix node descriptions in uniphier-phy example
  dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example
  dt-bindings: soc: socionext: Add UniPhier system controller
  dt-bindings: soc: socionext: Add UniPhier SoC-glue logic
  dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part
  dt-bindings: soc: socionext: Add UniPhier peripheral block
  dt-bindings: soc: socionext: Add UniPhier media I/O block
  dt-bindings: soc: socionext: Add UniPhier SD interface block
  dt-bindings: soc: socionext: Add UniPhier ADAMV block
  dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
  dt-bindings: soc: socionext: Add UniPhier AHCI glue layer

 .../clock/socionext,uniphier-clock.yaml       |  39 +-----
 .../nvmem/socionext,uniphier-efuse.yaml       | 101 +++++++--------
 .../phy/socionext,uniphier-ahci-phy.yaml      |  24 ++--
 .../phy/socionext,uniphier-usb2-phy.yaml      |  41 +++----
 .../phy/socionext,uniphier-usb3hs-phy.yaml    |  29 ++---
 .../phy/socionext,uniphier-usb3ss-phy.yaml    |  26 ++--
 .../pinctrl/socionext,uniphier-pinctrl.yaml   |  17 ++-
 .../socionext,uniphier-regulator.yaml         |  21 ++--
 .../reset/socionext,uniphier-glue-reset.yaml  |  23 ++--
 .../reset/socionext,uniphier-reset.yaml       |  52 +-------
 .../socionext/socionext,uniphier-adamv.yaml   |  50 ++++++++
 .../socionext,uniphier-ahci-glue.yaml         |  77 ++++++++++++
 .../socionext,uniphier-dwc3-glue.yaml         | 106 ++++++++++++++++
 .../socionext/socionext,uniphier-mioctrl.yaml |  65 ++++++++++
 .../socionext,uniphier-perictrl.yaml          |  64 ++++++++++
 .../socionext/socionext,uniphier-sdctrl.yaml  |  61 ++++++++++
 .../socionext,uniphier-soc-glue-debug.yaml    |  68 +++++++++++
 .../socionext,uniphier-soc-glue.yaml          | 115 ++++++++++++++++++
 .../socionext/socionext,uniphier-sysctrl.yaml | 104 ++++++++++++++++
 .../thermal/socionext,uniphier-thermal.yaml   |  15 +--
 .../watchdog/socionext,uniphier-wdt.yaml      |  10 +-
 MAINTAINERS                                   |   1 +
 22 files changed, 843 insertions(+), 266 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml

-- 
2.25.1

[PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Kunihiko Hayashi]

This series introduces dt-bindings documents for miscellaneous register
blocks implemented in Socionext UniPhier SoCs.

These are previously defined in the devicetree and used in the examples
of subnodes' dt-bindings, however, not documented.

These include two types of the blocks

* independent block including miscellaneous registers and functions for
  the whole SoC (system controller and SoC-glue logic)

* sideband logic including control registers in the component (others)

And prior to adding these dt-bindings, fix examples in the existing
dt-bindings.

This series is part of the previous series shown below:
https://lore.kernel.org/linux-arm-kernel/20221107103410.3443-2-hayashi.kunihiko@socionext.com

Changes since v2:
- Drop redundant nodes in examples (clock, reset, soc-glue-debug)
- Drop parent node in examples
- Add more properties to examples for pinctrl
- Add a patch for regulator change
- Use consistent quotes
- Drop unit address patterns of patternProperties
- Mandatory unit address pattern for efuse (soc-glue-debug)
- Fix additionalProperties (ahci-glue)

Changes since v1:
- Fix examples in the existing dt-bindings (Add PATCH 1-7)
- Add dt-bindings for SoC-glue logic debug part (Add PATCH 10)
- Drop generic and ld6b compatible strings
- Change "usb-controller" node in soc-glue to "usb-hub"
- Change "usb-controller" node in USB glue layer example to "usb"
- Add negation of child properties by compatible string

Kunihiko Hayashi (17):
  dt-bindings: clock: Fix node descriptions in uniphier-clock example
  dt-bindings: reset: Fix node descriptions in uniphier-reset example
  dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl
    example
  dt-bindings: regulator: Fix node descriptions in uniphier-regulator
    example
  dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example
  dt-bindings: thermal: Fix node descriptions in uniphier-thermal
    example
  dt-bindings: phy: Fix node descriptions in uniphier-phy example
  dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example
  dt-bindings: soc: socionext: Add UniPhier system controller
  dt-bindings: soc: socionext: Add UniPhier SoC-glue logic
  dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part
  dt-bindings: soc: socionext: Add UniPhier peripheral block
  dt-bindings: soc: socionext: Add UniPhier media I/O block
  dt-bindings: soc: socionext: Add UniPhier SD interface block
  dt-bindings: soc: socionext: Add UniPhier ADAMV block
  dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
  dt-bindings: soc: socionext: Add UniPhier AHCI glue layer

 .../clock/socionext,uniphier-clock.yaml       |  39 +-----
 .../nvmem/socionext,uniphier-efuse.yaml       | 101 +++++++--------
 .../phy/socionext,uniphier-ahci-phy.yaml      |  24 ++--
 .../phy/socionext,uniphier-usb2-phy.yaml      |  41 +++----
 .../phy/socionext,uniphier-usb3hs-phy.yaml    |  29 ++---
 .../phy/socionext,uniphier-usb3ss-phy.yaml    |  26 ++--
 .../pinctrl/socionext,uniphier-pinctrl.yaml   |  17 ++-
 .../socionext,uniphier-regulator.yaml         |  21 ++--
 .../reset/socionext,uniphier-glue-reset.yaml  |  23 ++--
 .../reset/socionext,uniphier-reset.yaml       |  52 +-------
 .../socionext/socionext,uniphier-adamv.yaml   |  50 ++++++++
 .../socionext,uniphier-ahci-glue.yaml         |  77 ++++++++++++
 .../socionext,uniphier-dwc3-glue.yaml         | 106 ++++++++++++++++
 .../socionext/socionext,uniphier-mioctrl.yaml |  65 ++++++++++
 .../socionext,uniphier-perictrl.yaml          |  64 ++++++++++
 .../socionext/socionext,uniphier-sdctrl.yaml  |  61 ++++++++++
 .../socionext,uniphier-soc-glue-debug.yaml    |  68 +++++++++++
 .../socionext,uniphier-soc-glue.yaml          | 115 ++++++++++++++++++
 .../socionext/socionext,uniphier-sysctrl.yaml | 104 ++++++++++++++++
 .../thermal/socionext,uniphier-thermal.yaml   |  15 +--
 .../watchdog/socionext,uniphier-wdt.yaml      |  10 +-
 MAINTAINERS                                   |   1 +
 22 files changed, 843 insertions(+), 266 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 01/17] dt-bindings: clock: Fix node descriptions in uniphier-clock example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
clock nodes to the generic names in the example.

And drop redundant examples and a parent node of the clock as it is not
directly necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../clock/socionext,uniphier-clock.yaml       | 39 ++-----------------
 1 file changed, 3 insertions(+), 36 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
index 9a0cc7341630..4e82582fb2f3 100644
--- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -61,40 +61,7 @@ required:
 
 examples:
   - |
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
-        reg = <0x61840000 0x4000>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    mioctrl@59810000 {
-        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
-        reg = <0x59810000 0x800>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-mio-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    perictrl@59820000 {
-        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
-        reg = <0x59820000 0x200>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-peri-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
+    clock-controller {
+        compatible = "socionext,uniphier-ld11-clock";
+        #clock-cells = <1>;
     };
-- 
2.25.1

[PATCH v3 01/17] dt-bindings: clock: Fix node descriptions in uniphier-clock example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
clock nodes to the generic names in the example.

And drop redundant examples and a parent node of the clock as it is not
directly necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../clock/socionext,uniphier-clock.yaml       | 39 ++-----------------
 1 file changed, 3 insertions(+), 36 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
index 9a0cc7341630..4e82582fb2f3 100644
--- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -61,40 +61,7 @@ required:
 
 examples:
   - |
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
-        reg = <0x61840000 0x4000>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    mioctrl@59810000 {
-        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
-        reg = <0x59810000 0x800>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-mio-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    perictrl@59820000 {
-        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
-        reg = <0x59820000 0x200>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-peri-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
+    clock-controller {
+        compatible = "socionext,uniphier-ld11-clock";
+        #clock-cells = <1>;
     };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 01/17] dt-bindings: clock: Fix node descriptions in uniphier-clock example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> clock nodes to the generic names in the example.
> 
> And drop redundant examples and a parent node of the clock as it is not
> directly necessary.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 01/17] dt-bindings: clock: Fix node descriptions in uniphier-clock example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> clock nodes to the generic names in the example.
> 
> And drop redundant examples and a parent node of the clock as it is not
> directly necessary.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 02/17] dt-bindings: reset: Fix node descriptions in uniphier-reset example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
reset nodes to the generic names in the example.

And drop redundant examples and a parent node of the reset as it is not
directly necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../reset/socionext,uniphier-glue-reset.yaml  | 23 +++-----
 .../reset/socionext,uniphier-reset.yaml       | 52 ++-----------------
 2 files changed, 11 insertions(+), 64 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
index 0a2c13e1e230..fa253c518d79 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -95,19 +95,12 @@ required:
 
 examples:
   - |
-    usb-glue@65b00000 {
-        compatible = "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_rst: reset@0 {
-            compatible = "socionext,uniphier-ld20-usb3-reset";
-            reg = <0x0 0x4>;
-            #reset-cells = <1>;
-            clock-names = "link";
-            clocks = <&sys_clk 14>;
-            reset-names = "link";
-            resets = <&sys_rst 14>;
-        };
+    usb_rst: reset-controller@0 {
+        compatible = "socionext,uniphier-ld20-usb3-reset";
+        reg = <0x0 0x4>;
+        #reset-cells = <1>;
+        clock-names = "link";
+        clocks = <&sys_clk 14>;
+        reset-names = "link";
+        resets = <&sys_rst 14>;
     };
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
index 6566804ec567..033b252a3dfe 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
@@ -66,53 +66,7 @@ required:
 
 examples:
   - |
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
-        reg = <0x61840000 0x4000>;
-
-        reset {
-            compatible = "socionext,uniphier-ld11-reset";
-            #reset-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    mioctrl@59810000 {
-        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
-        reg = <0x59810000 0x800>;
-
-        reset {
-            compatible = "socionext,uniphier-ld11-mio-reset";
-            #reset-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    perictrl@59820000 {
-        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
-        reg = <0x59820000 0x200>;
-
-        reset {
-            compatible = "socionext,uniphier-ld11-peri-reset";
-            #reset-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    adamv@57920000 {
-        compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon";
-        reg = <0x57920000 0x1000>;
-
-        reset {
-            compatible = "socionext,uniphier-ld11-adamv-reset";
-            #reset-cells = <1>;
-        };
-
-        // other nodes ...
+    reset-controller {
+        compatible = "socionext,uniphier-ld11-reset";
+        #reset-cells = <1>;
     };
-- 
2.25.1

[PATCH v3 02/17] dt-bindings: reset: Fix node descriptions in uniphier-reset example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
reset nodes to the generic names in the example.

And drop redundant examples and a parent node of the reset as it is not
directly necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../reset/socionext,uniphier-glue-reset.yaml  | 23 +++-----
 .../reset/socionext,uniphier-reset.yaml       | 52 ++-----------------
 2 files changed, 11 insertions(+), 64 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
index 0a2c13e1e230..fa253c518d79 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -95,19 +95,12 @@ required:
 
 examples:
   - |
-    usb-glue@65b00000 {
-        compatible = "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_rst: reset@0 {
-            compatible = "socionext,uniphier-ld20-usb3-reset";
-            reg = <0x0 0x4>;
-            #reset-cells = <1>;
-            clock-names = "link";
-            clocks = <&sys_clk 14>;
-            reset-names = "link";
-            resets = <&sys_rst 14>;
-        };
+    usb_rst: reset-controller@0 {
+        compatible = "socionext,uniphier-ld20-usb3-reset";
+        reg = <0x0 0x4>;
+        #reset-cells = <1>;
+        clock-names = "link";
+        clocks = <&sys_clk 14>;
+        reset-names = "link";
+        resets = <&sys_rst 14>;
     };
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
index 6566804ec567..033b252a3dfe 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
@@ -66,53 +66,7 @@ required:
 
 examples:
   - |
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
-        reg = <0x61840000 0x4000>;
-
-        reset {
-            compatible = "socionext,uniphier-ld11-reset";
-            #reset-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    mioctrl@59810000 {
-        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
-        reg = <0x59810000 0x800>;
-
-        reset {
-            compatible = "socionext,uniphier-ld11-mio-reset";
-            #reset-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    perictrl@59820000 {
-        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
-        reg = <0x59820000 0x200>;
-
-        reset {
-            compatible = "socionext,uniphier-ld11-peri-reset";
-            #reset-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    adamv@57920000 {
-        compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon";
-        reg = <0x57920000 0x1000>;
-
-        reset {
-            compatible = "socionext,uniphier-ld11-adamv-reset";
-            #reset-cells = <1>;
-        };
-
-        // other nodes ...
+    reset-controller {
+        compatible = "socionext,uniphier-ld11-reset";
+        #reset-cells = <1>;
     };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 02/17] dt-bindings: reset: Fix node descriptions in uniphier-reset example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> reset nodes to the generic names in the example.
> 
> And drop redundant examples and a parent node of the reset as it is not
> directly necessary.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 02/17] dt-bindings: reset: Fix node descriptions in uniphier-reset example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> reset nodes to the generic names in the example.
> 
> And drop redundant examples and a parent node of the reset as it is not
> directly necessary.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 03/17] dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl example

[Kunihiko Hayashi]

Drop parent node of the pinctrl as it is not directly necessary, and
add more examples, that is "groups", "function", and a child node to set
pin attributes, to express this pinctrl node in detail.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../pinctrl/socionext,uniphier-pinctrl.yaml     | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
index 14a8c0215cc6..bc34e2c872bc 100644
--- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
@@ -69,11 +70,17 @@ examples:
   - |
     // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
 
-    soc-glue@5f800000 {
-        compatible = "socionext,uniphier-pro4-soc-glue", "simple-mfd", "syscon";
-        reg = <0x5f800000 0x2000>;
+    pinctrl {
+        compatible = "socionext,uniphier-ld20-pinctrl";
+
+        pinctrl_ether_rgmii: ether-rgmii {
+            groups = "ether_rgmii";
+            function = "ether_rgmii";
 
-        pinctrl: pinctrl {
-            compatible = "socionext,uniphier-pro4-pinctrl";
+            tx {
+                pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+                       "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+                drive-strength = <9>;
+            };
         };
     };
-- 
2.25.1

[PATCH v3 03/17] dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl example

[Kunihiko Hayashi]

Drop parent node of the pinctrl as it is not directly necessary, and
add more examples, that is "groups", "function", and a child node to set
pin attributes, to express this pinctrl node in detail.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../pinctrl/socionext,uniphier-pinctrl.yaml     | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
index 14a8c0215cc6..bc34e2c872bc 100644
--- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
@@ -69,11 +70,17 @@ examples:
   - |
     // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
 
-    soc-glue@5f800000 {
-        compatible = "socionext,uniphier-pro4-soc-glue", "simple-mfd", "syscon";
-        reg = <0x5f800000 0x2000>;
+    pinctrl {
+        compatible = "socionext,uniphier-ld20-pinctrl";
+
+        pinctrl_ether_rgmii: ether-rgmii {
+            groups = "ether_rgmii";
+            function = "ether_rgmii";
 
-        pinctrl: pinctrl {
-            compatible = "socionext,uniphier-pro4-pinctrl";
+            tx {
+                pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+                       "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+                drive-strength = <9>;
+            };
         };
     };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 03/17] dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Drop parent node of the pinctrl as it is not directly necessary, and
> add more examples, that is "groups", "function", and a child node to set
> pin attributes, to express this pinctrl node in detail.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../pinctrl/socionext,uniphier-pinctrl.yaml     | 17 ++++++++++++-----
>  1 file changed, 12 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
> index 14a8c0215cc6..bc34e2c872bc 100644
> --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +

Drop this part, no blank lines between SPDX and YAML.

>  %YAML 1.2


Best regards,
Krzysztof

Re: [PATCH v3 03/17] dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Drop parent node of the pinctrl as it is not directly necessary, and
> add more examples, that is "groups", "function", and a child node to set
> pin attributes, to express this pinctrl node in detail.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../pinctrl/socionext,uniphier-pinctrl.yaml     | 17 ++++++++++++-----
>  1 file changed, 12 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
> index 14a8c0215cc6..bc34e2c872bc 100644
> --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +

Drop this part, no blank lines between SPDX and YAML.

>  %YAML 1.2


Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 03/17] dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl example

[Kunihiko Hayashi]

On 2022/12/13 23:52, Krzysztof Kozlowski wrote:
> On 13/12/2022 09:24, Kunihiko Hayashi wrote:
>> Drop parent node of the pinctrl as it is not directly necessary, and
>> add more examples, that is "groups", "function", and a child node to set
>> pin attributes, to express this pinctrl node in detail.
>>
>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>> ---
>>   .../pinctrl/socionext,uniphier-pinctrl.yaml     | 17 ++++++++++++-----
>>   1 file changed, 12 insertions(+), 5 deletions(-)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
>> b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
>> index 14a8c0215cc6..bc34e2c872bc 100644
>> ---
>> a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
>> +++
>> b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
>> @@ -1,4 +1,5 @@
>>   # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +
> 
> Drop this part, no blank lines between SPDX and YAML.

Thank you for checking.
I carelessly added a blank line. I'll remove it.

Thank you,

---
Best Regards
Kunihiko Hayashi

Re: [PATCH v3 03/17] dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl example

[Kunihiko Hayashi]

On 2022/12/13 23:52, Krzysztof Kozlowski wrote:
> On 13/12/2022 09:24, Kunihiko Hayashi wrote:
>> Drop parent node of the pinctrl as it is not directly necessary, and
>> add more examples, that is "groups", "function", and a child node to set
>> pin attributes, to express this pinctrl node in detail.
>>
>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>> ---
>>   .../pinctrl/socionext,uniphier-pinctrl.yaml     | 17 ++++++++++++-----
>>   1 file changed, 12 insertions(+), 5 deletions(-)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
>> b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
>> index 14a8c0215cc6..bc34e2c872bc 100644
>> ---
>> a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
>> +++
>> b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
>> @@ -1,4 +1,5 @@
>>   # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +
> 
> Drop this part, no blank lines between SPDX and YAML.

Thank you for checking.
I carelessly added a blank line. I'll remove it.

Thank you,

---
Best Regards
Kunihiko Hayashi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 04/17] dt-bindings: regulator: Fix node descriptions in uniphier-regulator example

[Kunihiko Hayashi]

Drop a parent node of the regulator as it is not directly necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-regulator.yaml         | 21 +++++++------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
index c0acf949753d..a6949a581cd1 100644
--- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -89,18 +89,11 @@ required:
 
 examples:
   - |
-    usb-glue@65b00000 {
-        compatible = "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_vbus0: regulators@100 {
-            compatible = "socionext,uniphier-ld20-usb3-regulator";
-            reg = <0x100 0x10>;
-            clock-names = "link";
-            clocks = <&sys_clk 14>;
-            reset-names = "link";
-            resets = <&sys_rst 14>;
-        };
+    usb_vbus0: regulators@100 {
+        compatible = "socionext,uniphier-ld20-usb3-regulator";
+        reg = <0x100 0x10>;
+        clock-names = "link";
+        clocks = <&sys_clk 14>;
+        reset-names = "link";
+        resets = <&sys_rst 14>;
     };
-- 
2.25.1

[PATCH v3 04/17] dt-bindings: regulator: Fix node descriptions in uniphier-regulator example

[Kunihiko Hayashi]

Drop a parent node of the regulator as it is not directly necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-regulator.yaml         | 21 +++++++------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
index c0acf949753d..a6949a581cd1 100644
--- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -89,18 +89,11 @@ required:
 
 examples:
   - |
-    usb-glue@65b00000 {
-        compatible = "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_vbus0: regulators@100 {
-            compatible = "socionext,uniphier-ld20-usb3-regulator";
-            reg = <0x100 0x10>;
-            clock-names = "link";
-            clocks = <&sys_clk 14>;
-            reset-names = "link";
-            resets = <&sys_rst 14>;
-        };
+    usb_vbus0: regulators@100 {
+        compatible = "socionext,uniphier-ld20-usb3-regulator";
+        reg = <0x100 0x10>;
+        clock-names = "link";
+        clocks = <&sys_clk 14>;
+        reset-names = "link";
+        resets = <&sys_rst 14>;
     };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 04/17] dt-bindings: regulator: Fix node descriptions in uniphier-regulator example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Drop a parent node of the regulator as it is not directly necessary.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 04/17] dt-bindings: regulator: Fix node descriptions in uniphier-regulator example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Drop a parent node of the regulator as it is not directly necessary.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 05/17] dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example

[Kunihiko Hayashi]

Drop a parent node of the watchdog as it is not directly necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../bindings/watchdog/socionext,uniphier-wdt.yaml      | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
index 90698cfa8f94..70c005fdd197 100644
--- a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
@@ -25,12 +25,6 @@ examples:
   - |
     // The UniPhier watchdog should be a subnode of a "syscon" compatible node.
 
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-ld11-sysctrl",
-                     "simple-mfd", "syscon";
-        reg = <0x61840000 0x10000>;
-
-        watchdog {
-            compatible = "socionext,uniphier-wdt";
-        };
+    watchdog {
+        compatible = "socionext,uniphier-wdt";
     };
-- 
2.25.1

[PATCH v3 05/17] dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example

[Kunihiko Hayashi]

Drop a parent node of the watchdog as it is not directly necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../bindings/watchdog/socionext,uniphier-wdt.yaml      | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
index 90698cfa8f94..70c005fdd197 100644
--- a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
@@ -25,12 +25,6 @@ examples:
   - |
     // The UniPhier watchdog should be a subnode of a "syscon" compatible node.
 
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-ld11-sysctrl",
-                     "simple-mfd", "syscon";
-        reg = <0x61840000 0x10000>;
-
-        watchdog {
-            compatible = "socionext,uniphier-wdt";
-        };
+    watchdog {
+        compatible = "socionext,uniphier-wdt";
     };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 05/17] dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Drop a parent node of the watchdog as it is not directly necessary.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../bindings/watchdog/socionext,uniphier-wdt.yaml      | 10 ++--------


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 05/17] dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Drop a parent node of the watchdog as it is not directly necessary.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../bindings/watchdog/socionext,uniphier-wdt.yaml      | 10 ++--------


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 06/17] dt-bindings: thermal: Fix node descriptions in uniphier-thermal example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
thermal node and its parent node to the generic names in the example.

And drop a parent node of the thermal-sensor  as it is not directly
necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../thermal/socionext,uniphier-thermal.yaml       | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
index c5b25ce44956..6f975821fa5e 100644
--- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@@ -46,14 +46,9 @@ examples:
   - |
     // The UniPhier thermal should be a subnode of a "syscon" compatible node.
 
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-ld20-sysctrl",
-                     "simple-mfd", "syscon";
-        reg = <0x61840000 0x10000>;
-
-        pvtctl: thermal {
-            compatible = "socionext,uniphier-ld20-thermal";
-            interrupts = <0 3 1>;
-            #thermal-sensor-cells = <0>;
-        };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pvtctl: thermal-sensor {
+        compatible = "socionext,uniphier-ld20-thermal";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
     };
-- 
2.25.1

[PATCH v3 06/17] dt-bindings: thermal: Fix node descriptions in uniphier-thermal example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
thermal node and its parent node to the generic names in the example.

And drop a parent node of the thermal-sensor  as it is not directly
necessary.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../thermal/socionext,uniphier-thermal.yaml       | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
index c5b25ce44956..6f975821fa5e 100644
--- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@@ -46,14 +46,9 @@ examples:
   - |
     // The UniPhier thermal should be a subnode of a "syscon" compatible node.
 
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-ld20-sysctrl",
-                     "simple-mfd", "syscon";
-        reg = <0x61840000 0x10000>;
-
-        pvtctl: thermal {
-            compatible = "socionext,uniphier-ld20-thermal";
-            interrupts = <0 3 1>;
-            #thermal-sensor-cells = <0>;
-        };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pvtctl: thermal-sensor {
+        compatible = "socionext,uniphier-ld20-thermal";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
     };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 06/17] dt-bindings: thermal: Fix node descriptions in uniphier-thermal example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> thermal node and its parent node to the generic names in the example.
> 
> And drop a parent node of the thermal-sensor  as it is not directly

Drop double space in "thermal-sensor  as" above

With this:

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 06/17] dt-bindings: thermal: Fix node descriptions in uniphier-thermal example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> thermal node and its parent node to the generic names in the example.
> 
> And drop a parent node of the thermal-sensor  as it is not directly

Drop double space in "thermal-sensor  as" above

With this:

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 06/17] dt-bindings: thermal: Fix node descriptions in uniphier-thermal example

[Kunihiko Hayashi]

On 2022/12/13 23:54, Krzysztof Kozlowski wrote:
> On 13/12/2022 09:24, Kunihiko Hayashi wrote:
>> Prior to adding dt-bindings for SoC-dependent controllers, rename the
>> thermal node and its parent node to the generic names in the example.
>>
>> And drop a parent node of the thermal-sensor  as it is not directly
> 
> Drop double space in "thermal-sensor  as" above

I'll fix it.

> With this:
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Thank you,

---
Best Regards
Kunihiko Hayashi

Re: [PATCH v3 06/17] dt-bindings: thermal: Fix node descriptions in uniphier-thermal example

[Kunihiko Hayashi]

On 2022/12/13 23:54, Krzysztof Kozlowski wrote:
> On 13/12/2022 09:24, Kunihiko Hayashi wrote:
>> Prior to adding dt-bindings for SoC-dependent controllers, rename the
>> thermal node and its parent node to the generic names in the example.
>>
>> And drop a parent node of the thermal-sensor  as it is not directly
> 
> Drop double space in "thermal-sensor  as" above

I'll fix it.

> With this:
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Thank you,

---
Best Regards
Kunihiko Hayashi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 07/17] dt-bindings: phy: Fix node descriptions in uniphier-phy example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
phy nodes and their parent nodes to the generic names in the example.

And drop parent nodes of each phy as they are not directly necessary here.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../phy/socionext,uniphier-ahci-phy.yaml      | 24 ++++-------
 .../phy/socionext,uniphier-usb2-phy.yaml      | 41 ++++++++-----------
 .../phy/socionext,uniphier-usb3hs-phy.yaml    | 29 +++++--------
 .../phy/socionext,uniphier-usb3ss-phy.yaml    | 26 ++++--------
 4 files changed, 46 insertions(+), 74 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
index a3cd45acea28..de3cffc850bc 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -117,20 +117,12 @@ additionalProperties: false
 
 examples:
   - |
-    ahci-glue@65700000 {
-        compatible = "socionext,uniphier-pxs3-ahci-glue",
-                     "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65700000 0x100>;
-
-        ahci_phy: phy@10 {
-            compatible = "socionext,uniphier-pxs3-ahci-phy";
-            reg = <0x10 0x10>;
-            #phy-cells = <0>;
-            clock-names = "link", "phy";
-            clocks = <&sys_clk 28>, <&sys_clk 30>;
-            reset-names = "link", "phy";
-            resets = <&sys_rst 28>, <&sys_rst 30>;
-        };
+    ahci_phy: phy@10 {
+        compatible = "socionext,uniphier-pxs3-ahci-phy";
+        reg = <0x10 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 28>, <&sys_clk 30>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 28>, <&sys_rst 30>;
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
index 63dab914a48d..19522c54f448 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
@@ -61,28 +61,23 @@ examples:
   - |
     // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node.
 
-    soc-glue@5f800000 {
-        compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon";
-        reg = <0x5f800000 0x2000>;
-
-        usb-controller {
-            compatible = "socionext,uniphier-ld11-usb2-phy";
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            usb_phy0: phy@0 {
-                reg = <0>;
-                #phy-cells = <0>;
-            };
-
-            usb_phy1: phy@1 {
-                reg = <1>;
-                #phy-cells = <0>;
-            };
-
-            usb_phy2: phy@2 {
-                reg = <2>;
-                #phy-cells = <0>;
-            };
+    usb-hub {
+        compatible = "socionext,uniphier-ld11-usb2-phy";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb_phy0: phy@0 {
+            reg = <0>;
+            #phy-cells = <0>;
+        };
+
+        usb_phy1: phy@1 {
+            reg = <1>;
+            #phy-cells = <0>;
+        };
+
+        usb_phy2: phy@2 {
+            reg = <2>;
+            #phy-cells = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
index 21e4414eea60..2107d98ace15 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -146,22 +146,15 @@ additionalProperties: false
 
 examples:
   - |
-    usb-glue@65b00000 {
-        compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_hsphy0: hs-phy@200 {
-            compatible = "socionext,uniphier-ld20-usb3-hsphy";
-            reg = <0x200 0x10>;
-            #phy-cells = <0>;
-            clock-names = "link", "phy";
-            clocks = <&sys_clk 14>, <&sys_clk 16>;
-            reset-names = "link", "phy";
-            resets = <&sys_rst 14>, <&sys_rst 16>;
-            vbus-supply = <&usb_vbus0>;
-            nvmem-cell-names = "rterm", "sel_t", "hs_i";
-            nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
-        };
+    usb_hsphy0: phy@200 {
+        compatible = "socionext,uniphier-ld20-usb3-hsphy";
+        reg = <0x200 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 14>, <&sys_clk 16>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 14>, <&sys_rst 16>;
+        vbus-supply = <&usb_vbus0>;
+        nvmem-cell-names = "rterm", "sel_t", "hs_i";
+        nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
index 4c26d2d2303d..8f5aa6238bf3 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -131,21 +131,13 @@ additionalProperties: false
 
 examples:
   - |
-    usb-glue@65b00000 {
-        compatible = "socionext,uniphier-ld20-dwc3-glue",
-                     "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_ssphy0: ss-phy@300 {
-            compatible = "socionext,uniphier-ld20-usb3-ssphy";
-            reg = <0x300 0x10>;
-            #phy-cells = <0>;
-            clock-names = "link", "phy";
-            clocks = <&sys_clk 14>, <&sys_clk 16>;
-            reset-names = "link", "phy";
-            resets = <&sys_rst 14>, <&sys_rst 16>;
-            vbus-supply = <&usb_vbus0>;
-        };
+    usb_ssphy0: phy@300 {
+        compatible = "socionext,uniphier-ld20-usb3-ssphy";
+        reg = <0x300 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 14>, <&sys_clk 16>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 14>, <&sys_rst 16>;
+        vbus-supply = <&usb_vbus0>;
     };
-- 
2.25.1

[PATCH v3 07/17] dt-bindings: phy: Fix node descriptions in uniphier-phy example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
phy nodes and their parent nodes to the generic names in the example.

And drop parent nodes of each phy as they are not directly necessary here.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../phy/socionext,uniphier-ahci-phy.yaml      | 24 ++++-------
 .../phy/socionext,uniphier-usb2-phy.yaml      | 41 ++++++++-----------
 .../phy/socionext,uniphier-usb3hs-phy.yaml    | 29 +++++--------
 .../phy/socionext,uniphier-usb3ss-phy.yaml    | 26 ++++--------
 4 files changed, 46 insertions(+), 74 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
index a3cd45acea28..de3cffc850bc 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -117,20 +117,12 @@ additionalProperties: false
 
 examples:
   - |
-    ahci-glue@65700000 {
-        compatible = "socionext,uniphier-pxs3-ahci-glue",
-                     "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65700000 0x100>;
-
-        ahci_phy: phy@10 {
-            compatible = "socionext,uniphier-pxs3-ahci-phy";
-            reg = <0x10 0x10>;
-            #phy-cells = <0>;
-            clock-names = "link", "phy";
-            clocks = <&sys_clk 28>, <&sys_clk 30>;
-            reset-names = "link", "phy";
-            resets = <&sys_rst 28>, <&sys_rst 30>;
-        };
+    ahci_phy: phy@10 {
+        compatible = "socionext,uniphier-pxs3-ahci-phy";
+        reg = <0x10 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 28>, <&sys_clk 30>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 28>, <&sys_rst 30>;
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
index 63dab914a48d..19522c54f448 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
@@ -61,28 +61,23 @@ examples:
   - |
     // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node.
 
-    soc-glue@5f800000 {
-        compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon";
-        reg = <0x5f800000 0x2000>;
-
-        usb-controller {
-            compatible = "socionext,uniphier-ld11-usb2-phy";
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            usb_phy0: phy@0 {
-                reg = <0>;
-                #phy-cells = <0>;
-            };
-
-            usb_phy1: phy@1 {
-                reg = <1>;
-                #phy-cells = <0>;
-            };
-
-            usb_phy2: phy@2 {
-                reg = <2>;
-                #phy-cells = <0>;
-            };
+    usb-hub {
+        compatible = "socionext,uniphier-ld11-usb2-phy";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb_phy0: phy@0 {
+            reg = <0>;
+            #phy-cells = <0>;
+        };
+
+        usb_phy1: phy@1 {
+            reg = <1>;
+            #phy-cells = <0>;
+        };
+
+        usb_phy2: phy@2 {
+            reg = <2>;
+            #phy-cells = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
index 21e4414eea60..2107d98ace15 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -146,22 +146,15 @@ additionalProperties: false
 
 examples:
   - |
-    usb-glue@65b00000 {
-        compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_hsphy0: hs-phy@200 {
-            compatible = "socionext,uniphier-ld20-usb3-hsphy";
-            reg = <0x200 0x10>;
-            #phy-cells = <0>;
-            clock-names = "link", "phy";
-            clocks = <&sys_clk 14>, <&sys_clk 16>;
-            reset-names = "link", "phy";
-            resets = <&sys_rst 14>, <&sys_rst 16>;
-            vbus-supply = <&usb_vbus0>;
-            nvmem-cell-names = "rterm", "sel_t", "hs_i";
-            nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
-        };
+    usb_hsphy0: phy@200 {
+        compatible = "socionext,uniphier-ld20-usb3-hsphy";
+        reg = <0x200 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 14>, <&sys_clk 16>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 14>, <&sys_rst 16>;
+        vbus-supply = <&usb_vbus0>;
+        nvmem-cell-names = "rterm", "sel_t", "hs_i";
+        nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
index 4c26d2d2303d..8f5aa6238bf3 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -131,21 +131,13 @@ additionalProperties: false
 
 examples:
   - |
-    usb-glue@65b00000 {
-        compatible = "socionext,uniphier-ld20-dwc3-glue",
-                     "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_ssphy0: ss-phy@300 {
-            compatible = "socionext,uniphier-ld20-usb3-ssphy";
-            reg = <0x300 0x10>;
-            #phy-cells = <0>;
-            clock-names = "link", "phy";
-            clocks = <&sys_clk 14>, <&sys_clk 16>;
-            reset-names = "link", "phy";
-            resets = <&sys_rst 14>, <&sys_rst 16>;
-            vbus-supply = <&usb_vbus0>;
-        };
+    usb_ssphy0: phy@300 {
+        compatible = "socionext,uniphier-ld20-usb3-ssphy";
+        reg = <0x300 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 14>, <&sys_clk 16>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 14>, <&sys_rst 16>;
+        vbus-supply = <&usb_vbus0>;
     };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 07/17] dt-bindings: phy: Fix node descriptions in uniphier-phy example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> phy nodes and their parent nodes to the generic names in the example.
> 
> And drop parent nodes of each phy as they are not directly necessary here.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../phy/socionext,uniphier-ahci-phy.yaml      | 24 ++++-------


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]


Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 07/17] dt-bindings: phy: Fix node descriptions in uniphier-phy example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> phy nodes and their parent nodes to the generic names in the example.
> 
> And drop parent nodes of each phy as they are not directly necessary here.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../phy/socionext,uniphier-ahci-phy.yaml      | 24 ++++-------


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]


Best regards,
Krzysztof

[PATCH v3 08/17] dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
parent node to the generic name in the example.

And drop a parent node of the nvmem as it is not directly necessary here.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../nvmem/socionext,uniphier-efuse.yaml       | 101 ++++++++----------
 1 file changed, 46 insertions(+), 55 deletions(-)

diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
index 2578e39deda9..a1dea3d7669c 100644
--- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
@@ -31,65 +31,56 @@ unevaluatedProperties: false
 
 examples:
   - |
-    // The UniPhier eFuse should be a subnode of a "soc-glue" node.
+    efuse@100 {
+        compatible = "socionext,uniphier-efuse";
+        reg = <0x100 0x28>;
+    };
 
-    soc-glue@5f900000 {
-        compatible = "simple-mfd";
+    efuse@200 {
+        compatible = "socionext,uniphier-efuse";
+        reg = <0x200 0x68>;
         #address-cells = <1>;
         #size-cells = <1>;
-        ranges = <0x0 0x5f900000 0x2000>;
 
-        efuse@100 {
-            compatible = "socionext,uniphier-efuse";
-            reg = <0x100 0x28>;
+        /* Data cells */
+        usb_rterm0: trim@54,4 {
+            reg = <0x54 1>;
+            bits = <4 2>;
         };
-
-        efuse@200 {
-            compatible = "socionext,uniphier-efuse";
-            reg = <0x200 0x68>;
-            #address-cells = <1>;
-            #size-cells = <1>;
-
-            /* Data cells */
-            usb_rterm0: trim@54,4 {
-                reg = <0x54 1>;
-                bits = <4 2>;
-            };
-            usb_rterm1: trim@55,4 {
-                reg = <0x55 1>;
-                bits = <4 2>;
-            };
-            usb_rterm2: trim@58,4 {
-                reg = <0x58 1>;
-                bits = <4 2>;
-            };
-            usb_rterm3: trim@59,4 {
-                reg = <0x59 1>;
-                bits = <4 2>;
-            };
-            usb_sel_t0: trim@54,0 {
-                reg = <0x54 1>;
-                bits = <0 4>;
-            };
-            usb_sel_t1: trim@55,0 {
-                reg = <0x55 1>;
-                bits = <0 4>;
-            };
-            usb_sel_t2: trim@58,0 {
-                reg = <0x58 1>;
-                bits = <0 4>;
-            };
-            usb_sel_t3: trim@59,0 {
-                reg = <0x59 1>;
-                bits = <0 4>;
-            };
-            usb_hs_i0: trim@56,0 {
-                reg = <0x56 1>;
-                bits = <0 4>;
-            };
-            usb_hs_i2: trim@5a,0 {
-                reg = <0x5a 1>;
-                bits = <0 4>;
-            };
+        usb_rterm1: trim@55,4 {
+            reg = <0x55 1>;
+            bits = <4 2>;
+        };
+        usb_rterm2: trim@58,4 {
+            reg = <0x58 1>;
+            bits = <4 2>;
+        };
+        usb_rterm3: trim@59,4 {
+            reg = <0x59 1>;
+            bits = <4 2>;
+        };
+        usb_sel_t0: trim@54,0 {
+            reg = <0x54 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t1: trim@55,0 {
+            reg = <0x55 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t2: trim@58,0 {
+            reg = <0x58 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t3: trim@59,0 {
+            reg = <0x59 1>;
+            bits = <0 4>;
+        };
+        usb_hs_i0: trim@56,0 {
+            reg = <0x56 1>;
+            bits = <0 4>;
+        };
+        usb_hs_i2: trim@5a,0 {
+            reg = <0x5a 1>;
+            bits = <0 4>;
         };
     };
-- 
2.25.1

[PATCH v3 08/17] dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example

[Kunihiko Hayashi]

Prior to adding dt-bindings for SoC-dependent controllers, rename the
parent node to the generic name in the example.

And drop a parent node of the nvmem as it is not directly necessary here.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../nvmem/socionext,uniphier-efuse.yaml       | 101 ++++++++----------
 1 file changed, 46 insertions(+), 55 deletions(-)

diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
index 2578e39deda9..a1dea3d7669c 100644
--- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
@@ -31,65 +31,56 @@ unevaluatedProperties: false
 
 examples:
   - |
-    // The UniPhier eFuse should be a subnode of a "soc-glue" node.
+    efuse@100 {
+        compatible = "socionext,uniphier-efuse";
+        reg = <0x100 0x28>;
+    };
 
-    soc-glue@5f900000 {
-        compatible = "simple-mfd";
+    efuse@200 {
+        compatible = "socionext,uniphier-efuse";
+        reg = <0x200 0x68>;
         #address-cells = <1>;
         #size-cells = <1>;
-        ranges = <0x0 0x5f900000 0x2000>;
 
-        efuse@100 {
-            compatible = "socionext,uniphier-efuse";
-            reg = <0x100 0x28>;
+        /* Data cells */
+        usb_rterm0: trim@54,4 {
+            reg = <0x54 1>;
+            bits = <4 2>;
         };
-
-        efuse@200 {
-            compatible = "socionext,uniphier-efuse";
-            reg = <0x200 0x68>;
-            #address-cells = <1>;
-            #size-cells = <1>;
-
-            /* Data cells */
-            usb_rterm0: trim@54,4 {
-                reg = <0x54 1>;
-                bits = <4 2>;
-            };
-            usb_rterm1: trim@55,4 {
-                reg = <0x55 1>;
-                bits = <4 2>;
-            };
-            usb_rterm2: trim@58,4 {
-                reg = <0x58 1>;
-                bits = <4 2>;
-            };
-            usb_rterm3: trim@59,4 {
-                reg = <0x59 1>;
-                bits = <4 2>;
-            };
-            usb_sel_t0: trim@54,0 {
-                reg = <0x54 1>;
-                bits = <0 4>;
-            };
-            usb_sel_t1: trim@55,0 {
-                reg = <0x55 1>;
-                bits = <0 4>;
-            };
-            usb_sel_t2: trim@58,0 {
-                reg = <0x58 1>;
-                bits = <0 4>;
-            };
-            usb_sel_t3: trim@59,0 {
-                reg = <0x59 1>;
-                bits = <0 4>;
-            };
-            usb_hs_i0: trim@56,0 {
-                reg = <0x56 1>;
-                bits = <0 4>;
-            };
-            usb_hs_i2: trim@5a,0 {
-                reg = <0x5a 1>;
-                bits = <0 4>;
-            };
+        usb_rterm1: trim@55,4 {
+            reg = <0x55 1>;
+            bits = <4 2>;
+        };
+        usb_rterm2: trim@58,4 {
+            reg = <0x58 1>;
+            bits = <4 2>;
+        };
+        usb_rterm3: trim@59,4 {
+            reg = <0x59 1>;
+            bits = <4 2>;
+        };
+        usb_sel_t0: trim@54,0 {
+            reg = <0x54 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t1: trim@55,0 {
+            reg = <0x55 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t2: trim@58,0 {
+            reg = <0x58 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t3: trim@59,0 {
+            reg = <0x59 1>;
+            bits = <0 4>;
+        };
+        usb_hs_i0: trim@56,0 {
+            reg = <0x56 1>;
+            bits = <0 4>;
+        };
+        usb_hs_i2: trim@5a,0 {
+            reg = <0x5a 1>;
+            bits = <0 4>;
         };
     };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 08/17] dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> parent node to the generic name in the example.
> 
> And drop a parent node of the nvmem as it is not directly necessary here.
> 


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 08/17] dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> parent node to the generic name in the example.
> 
> And drop a parent node of the nvmem as it is not directly necessary here.
> 


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 09/17] dt-bindings: soc: socionext: Add UniPhier system controller

[Kunihiko Hayashi]

Add devicetree binding schema for the system controller implemented on
Socionext Uniphier SoCs.

This system controller has multiple functions such as clock control,
reset control, internal watchdog timer, thermal management, and so on.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext/socionext,uniphier-sysctrl.yaml | 104 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 105 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml
new file mode 100644
index 000000000000..3acb14201d1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier system controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  System controller implemented on Socionext UniPhier SoCs has multiple
+  functions such as clock control, reset control, internal watchdog timer,
+  thermal management, and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-sysctrl
+          - socionext,uniphier-pro4-sysctrl
+          - socionext,uniphier-pro5-sysctrl
+          - socionext,uniphier-pxs2-sysctrl
+          - socionext,uniphier-sld8-sysctrl
+          - socionext,uniphier-ld11-sysctrl
+          - socionext,uniphier-ld20-sysctrl
+          - socionext,uniphier-pxs3-sysctrl
+          - socionext,uniphier-nx1-sysctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+  watchdog:
+    $ref: /schemas/watchdog/socionext,uniphier-wdt.yaml#
+
+  thermal-sensor:
+    $ref: /schemas/thermal/socionext,uniphier-thermal.yaml#
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-ld4-sysctrl
+    then:
+      properties:
+        watchdog: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-ld4-sysctrl
+              - socionext,uniphier-pro4-sysctrl
+              - socionext,uniphier-sld8-sysctrl
+              - socionext,uniphier-ld11-sysctrl
+    then:
+      properties:
+        thermal-sensor: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    syscon@61840000 {
+        compatible = "socionext,uniphier-ld20-sysctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x61840000 0x4000>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld20-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-reset";
+            #reset-cells = <1>;
+        };
+
+        watchdog {
+            compatible = "socionext,uniphier-wdt";
+        };
+
+        thermal-sensor {
+            compatible = "socionext,uniphier-ld20-thermal";
+            interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d8faba73fe8..8cec8ea46dd1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3103,6 +3103,7 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
 F:	Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
 F:	Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+F:	Documentation/devicetree/bindings/soc/socionext/socionext,uniphier*.yaml
 F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
 F:	arch/arm/mach-uniphier/
-- 
2.25.1

[PATCH v3 09/17] dt-bindings: soc: socionext: Add UniPhier system controller

[Kunihiko Hayashi]

Add devicetree binding schema for the system controller implemented on
Socionext Uniphier SoCs.

This system controller has multiple functions such as clock control,
reset control, internal watchdog timer, thermal management, and so on.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext/socionext,uniphier-sysctrl.yaml | 104 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 105 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml
new file mode 100644
index 000000000000..3acb14201d1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier system controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  System controller implemented on Socionext UniPhier SoCs has multiple
+  functions such as clock control, reset control, internal watchdog timer,
+  thermal management, and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-sysctrl
+          - socionext,uniphier-pro4-sysctrl
+          - socionext,uniphier-pro5-sysctrl
+          - socionext,uniphier-pxs2-sysctrl
+          - socionext,uniphier-sld8-sysctrl
+          - socionext,uniphier-ld11-sysctrl
+          - socionext,uniphier-ld20-sysctrl
+          - socionext,uniphier-pxs3-sysctrl
+          - socionext,uniphier-nx1-sysctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+  watchdog:
+    $ref: /schemas/watchdog/socionext,uniphier-wdt.yaml#
+
+  thermal-sensor:
+    $ref: /schemas/thermal/socionext,uniphier-thermal.yaml#
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-ld4-sysctrl
+    then:
+      properties:
+        watchdog: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-ld4-sysctrl
+              - socionext,uniphier-pro4-sysctrl
+              - socionext,uniphier-sld8-sysctrl
+              - socionext,uniphier-ld11-sysctrl
+    then:
+      properties:
+        thermal-sensor: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    syscon@61840000 {
+        compatible = "socionext,uniphier-ld20-sysctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x61840000 0x4000>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld20-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-reset";
+            #reset-cells = <1>;
+        };
+
+        watchdog {
+            compatible = "socionext,uniphier-wdt";
+        };
+
+        thermal-sensor {
+            compatible = "socionext,uniphier-ld20-thermal";
+            interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d8faba73fe8..8cec8ea46dd1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3103,6 +3103,7 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
 F:	Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
 F:	Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+F:	Documentation/devicetree/bindings/soc/socionext/socionext,uniphier*.yaml
 F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
 F:	arch/arm/mach-uniphier/
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 09/17] dt-bindings: soc: socionext: Add UniPhier system controller

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the system controller implemented on
> Socionext Uniphier SoCs.
> 
> This system controller has multiple functions such as clock control,
> reset control, internal watchdog timer, thermal management, and so on.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 09/17] dt-bindings: soc: socionext: Add UniPhier system controller

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the system controller implemented on
> Socionext Uniphier SoCs.
> 
> This system controller has multiple functions such as clock control,
> reset control, internal watchdog timer, thermal management, and so on.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 10/17] dt-bindings: soc: socionext: Add UniPhier SoC-glue logic

[Kunihiko Hayashi]

Add devicetree binding schema for the SoC-glue logic implemented on
Socionext Uniphier SoCs.

This SoC-glue logic is a set of miscellaneous function registers
handling signals for specific devices outside system components,
and also has multiple functions such as I/O pinmux, usb-phy, debug,
clock-mux for a specific SoC, and so on.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-soc-glue.yaml          | 115 ++++++++++++++++++
 1 file changed, 115 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
new file mode 100644
index 000000000000..4b6852db4747
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC-glue logic
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  SoC-glue logic implemented on Socionext UniPhier SoCs is a collection of
+  miscellaneous function registers handling signals outside system components.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-soc-glue
+          - socionext,uniphier-pro4-soc-glue
+          - socionext,uniphier-pro5-soc-glue
+          - socionext,uniphier-pxs2-soc-glue
+          - socionext,uniphier-sld8-soc-glue
+          - socionext,uniphier-ld11-soc-glue
+          - socionext,uniphier-ld20-soc-glue
+          - socionext,uniphier-pxs3-soc-glue
+          - socionext,uniphier-nx1-soc-glue
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  pinctrl:
+    $ref: /schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
+
+  usb-hub:
+    $ref: /schemas/phy/socionext,uniphier-usb2-phy.yaml#
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - socionext,uniphier-pro4-soc-glue
+                - socionext,uniphier-ld11-soc-glue
+    then:
+      properties:
+        usb-hub: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: socionext,uniphier-pro4-soc-glue
+    then:
+      properties:
+        clock-controller: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@5f800000 {
+        compatible = "socionext,uniphier-pro4-soc-glue",
+                     "simple-mfd", "syscon";
+        reg = <0x5f800000 0x2000>;
+
+        pinctrl {
+            compatible = "socionext,uniphier-pro4-pinctrl";
+        };
+
+        usb-hub {
+            compatible = "socionext,uniphier-pro4-usb2-phy";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy@0 {
+                reg = <0>;
+                #phy-cells = <0>;
+            };
+
+            phy@1 {
+                reg = <1>;
+                #phy-cells = <0>;
+            };
+
+            phy@2 {
+                reg = <2>;
+                #phy-cells = <0>;
+            };
+
+            phy@3 {
+                reg = <3>;
+                #phy-cells = <0>;
+            };
+        };
+
+        clock-controller {
+            compatible = "socionext,uniphier-pro4-sg-clock";
+            #clock-cells = <1>;
+        };
+    };
-- 
2.25.1

[PATCH v3 10/17] dt-bindings: soc: socionext: Add UniPhier SoC-glue logic

[Kunihiko Hayashi]

Add devicetree binding schema for the SoC-glue logic implemented on
Socionext Uniphier SoCs.

This SoC-glue logic is a set of miscellaneous function registers
handling signals for specific devices outside system components,
and also has multiple functions such as I/O pinmux, usb-phy, debug,
clock-mux for a specific SoC, and so on.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-soc-glue.yaml          | 115 ++++++++++++++++++
 1 file changed, 115 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
new file mode 100644
index 000000000000..4b6852db4747
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC-glue logic
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  SoC-glue logic implemented on Socionext UniPhier SoCs is a collection of
+  miscellaneous function registers handling signals outside system components.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-soc-glue
+          - socionext,uniphier-pro4-soc-glue
+          - socionext,uniphier-pro5-soc-glue
+          - socionext,uniphier-pxs2-soc-glue
+          - socionext,uniphier-sld8-soc-glue
+          - socionext,uniphier-ld11-soc-glue
+          - socionext,uniphier-ld20-soc-glue
+          - socionext,uniphier-pxs3-soc-glue
+          - socionext,uniphier-nx1-soc-glue
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  pinctrl:
+    $ref: /schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
+
+  usb-hub:
+    $ref: /schemas/phy/socionext,uniphier-usb2-phy.yaml#
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - socionext,uniphier-pro4-soc-glue
+                - socionext,uniphier-ld11-soc-glue
+    then:
+      properties:
+        usb-hub: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: socionext,uniphier-pro4-soc-glue
+    then:
+      properties:
+        clock-controller: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@5f800000 {
+        compatible = "socionext,uniphier-pro4-soc-glue",
+                     "simple-mfd", "syscon";
+        reg = <0x5f800000 0x2000>;
+
+        pinctrl {
+            compatible = "socionext,uniphier-pro4-pinctrl";
+        };
+
+        usb-hub {
+            compatible = "socionext,uniphier-pro4-usb2-phy";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy@0 {
+                reg = <0>;
+                #phy-cells = <0>;
+            };
+
+            phy@1 {
+                reg = <1>;
+                #phy-cells = <0>;
+            };
+
+            phy@2 {
+                reg = <2>;
+                #phy-cells = <0>;
+            };
+
+            phy@3 {
+                reg = <3>;
+                #phy-cells = <0>;
+            };
+        };
+
+        clock-controller {
+            compatible = "socionext,uniphier-pro4-sg-clock";
+            #clock-cells = <1>;
+        };
+    };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 10/17] dt-bindings: soc: socionext: Add UniPhier SoC-glue logic

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the SoC-glue logic implemented on
> Socionext Uniphier SoCs.
> 
> This SoC-glue logic is a set of miscellaneous function registers
> handling signals for specific devices outside system components,
> and also has multiple functions such as I/O pinmux, usb-phy, debug,
> clock-mux for a specific SoC, and so on.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 10/17] dt-bindings: soc: socionext: Add UniPhier SoC-glue logic

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the SoC-glue logic implemented on
> Socionext Uniphier SoCs.
> 
> This SoC-glue logic is a set of miscellaneous function registers
> handling signals for specific devices outside system components,
> and also has multiple functions such as I/O pinmux, usb-phy, debug,
> clock-mux for a specific SoC, and so on.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 11/17] dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part

[Kunihiko Hayashi]

Add devicetree binding schema for the SoC-glue logic debug part
implemented on Socionext Uniphier SoCs.

This SoC-glue logic debug part is a set of miscellaneous function
registers handling signals for specific devices outside system
components, and also has multiple functions such as efuse, debug unit,
several monitors for specific SoC, and so on.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-soc-glue-debug.yaml    | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml
new file mode 100644
index 000000000000..1341544d1df5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue-debug.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC-glue logic debug part
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  SoC-glue logic debug part implemented on Socionext UniPhier SoCs is
+  a collection of miscellaneous function registers handling signals outside
+  system components for debug and monitor use.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-soc-glue-debug
+          - socionext,uniphier-pro4-soc-glue-debug
+          - socionext,uniphier-pro5-soc-glue-debug
+          - socionext,uniphier-pxs2-soc-glue-debug
+          - socionext,uniphier-sld8-soc-glue-debug
+          - socionext,uniphier-ld11-soc-glue-debug
+          - socionext,uniphier-ld20-soc-glue-debug
+          - socionext,uniphier-pxs3-soc-glue-debug
+          - socionext,uniphier-nx1-soc-glue-debug
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^efuse@[0-9a-f]+$":
+    $ref: /schemas/nvmem/socionext,uniphier-efuse.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@5f900000 {
+        compatible = "socionext,uniphier-pxs2-soc-glue-debug",
+                     "simple-mfd", "syscon";
+        reg = <0x5f900000 0x2000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x5f900000 0x2000>;
+
+        efuse@100 {
+            compatible = "socionext,uniphier-efuse";
+            reg = <0x100 0x28>;
+        };
+    };
-- 
2.25.1

[PATCH v3 11/17] dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part

[Kunihiko Hayashi]

Add devicetree binding schema for the SoC-glue logic debug part
implemented on Socionext Uniphier SoCs.

This SoC-glue logic debug part is a set of miscellaneous function
registers handling signals for specific devices outside system
components, and also has multiple functions such as efuse, debug unit,
several monitors for specific SoC, and so on.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-soc-glue-debug.yaml    | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml
new file mode 100644
index 000000000000..1341544d1df5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue-debug.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC-glue logic debug part
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  SoC-glue logic debug part implemented on Socionext UniPhier SoCs is
+  a collection of miscellaneous function registers handling signals outside
+  system components for debug and monitor use.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-soc-glue-debug
+          - socionext,uniphier-pro4-soc-glue-debug
+          - socionext,uniphier-pro5-soc-glue-debug
+          - socionext,uniphier-pxs2-soc-glue-debug
+          - socionext,uniphier-sld8-soc-glue-debug
+          - socionext,uniphier-ld11-soc-glue-debug
+          - socionext,uniphier-ld20-soc-glue-debug
+          - socionext,uniphier-pxs3-soc-glue-debug
+          - socionext,uniphier-nx1-soc-glue-debug
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^efuse@[0-9a-f]+$":
+    $ref: /schemas/nvmem/socionext,uniphier-efuse.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@5f900000 {
+        compatible = "socionext,uniphier-pxs2-soc-glue-debug",
+                     "simple-mfd", "syscon";
+        reg = <0x5f900000 0x2000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x5f900000 0x2000>;
+
+        efuse@100 {
+            compatible = "socionext,uniphier-efuse";
+            reg = <0x100 0x28>;
+        };
+    };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 11/17] dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the SoC-glue logic debug part
> implemented on Socionext Uniphier SoCs.
> 
> This SoC-glue logic debug part is a set of miscellaneous function
> registers handling signals for specific devices outside system
> components, and also has multiple functions such as efuse, debug unit,
> several monitors for specific SoC, and so on.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 11/17] dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the SoC-glue logic debug part
> implemented on Socionext Uniphier SoCs.
> 
> This SoC-glue logic debug part is a set of miscellaneous function
> registers handling signals for specific devices outside system
> components, and also has multiple functions such as efuse, debug unit,
> several monitors for specific SoC, and so on.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 12/17] dt-bindings: soc: socionext: Add UniPhier peripheral block

[Kunihiko Hayashi]

Add devicetree binding schema for the peripheral block implemented on
Socionext Uniphier SoCs.

Peripheral block implemented on Socionext UniPhier SoCs is an integrated
component of the peripherals including UART, I2C/FI2C, and SCSSI.

Peripheral block has some function logics to control the component.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-perictrl.yaml          | 64 +++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
new file mode 100644
index 000000000000..0adcffe859ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-perictrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier peripheral block controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  Peripheral block implemented on Socionext UniPhier SoCs is an integrated
+  component of the peripherals including UART, I2C/FI2C, and SCSSI.
+  Peripheral block controller is a logic to control the component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-perictrl
+          - socionext,uniphier-pro4-perictrl
+          - socionext,uniphier-pro5-perictrl
+          - socionext,uniphier-pxs2-perictrl
+          - socionext,uniphier-sld8-perictrl
+          - socionext,uniphier-ld11-perictrl
+          - socionext,uniphier-ld20-perictrl
+          - socionext,uniphier-pxs3-perictrl
+          - socionext,uniphier-nx1-perictrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@59820000 {
+        compatible = "socionext,uniphier-ld20-perictrl",
+                     "simple-mfd", "syscon";
+        reg = <0x59820000 0x200>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld20-peri-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-peri-reset";
+            #reset-cells = <1>;
+        };
+    };
-- 
2.25.1

[PATCH v3 12/17] dt-bindings: soc: socionext: Add UniPhier peripheral block

[Kunihiko Hayashi]

Add devicetree binding schema for the peripheral block implemented on
Socionext Uniphier SoCs.

Peripheral block implemented on Socionext UniPhier SoCs is an integrated
component of the peripherals including UART, I2C/FI2C, and SCSSI.

Peripheral block has some function logics to control the component.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-perictrl.yaml          | 64 +++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
new file mode 100644
index 000000000000..0adcffe859ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-perictrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier peripheral block controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  Peripheral block implemented on Socionext UniPhier SoCs is an integrated
+  component of the peripherals including UART, I2C/FI2C, and SCSSI.
+  Peripheral block controller is a logic to control the component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-perictrl
+          - socionext,uniphier-pro4-perictrl
+          - socionext,uniphier-pro5-perictrl
+          - socionext,uniphier-pxs2-perictrl
+          - socionext,uniphier-sld8-perictrl
+          - socionext,uniphier-ld11-perictrl
+          - socionext,uniphier-ld20-perictrl
+          - socionext,uniphier-pxs3-perictrl
+          - socionext,uniphier-nx1-perictrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@59820000 {
+        compatible = "socionext,uniphier-ld20-perictrl",
+                     "simple-mfd", "syscon";
+        reg = <0x59820000 0x200>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld20-peri-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-peri-reset";
+            #reset-cells = <1>;
+        };
+    };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 12/17] dt-bindings: soc: socionext: Add UniPhier peripheral block

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the peripheral block implemented on
> Socionext Uniphier SoCs.
> 
> Peripheral block implemented on Socionext UniPhier SoCs is an integrated
> component of the peripherals including UART, I2C/FI2C, and SCSSI.
> 
> Peripheral block has some function logics to control the component.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 12/17] dt-bindings: soc: socionext: Add UniPhier peripheral block

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the peripheral block implemented on
> Socionext Uniphier SoCs.
> 
> Peripheral block implemented on Socionext UniPhier SoCs is an integrated
> component of the peripherals including UART, I2C/FI2C, and SCSSI.
> 
> Peripheral block has some function logics to control the component.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 13/17] dt-bindings: soc: socionext: Add UniPhier media I/O block

[Kunihiko Hayashi]

Add devicetree binding schema for the media I/O block implemented on
Socionext Uniphier SoCs. This block is implemented on LD4, sLD8, Pro4,
and LD11 SoCs.

Media I/O block implemented on Socionext UniPhier SoCs is an integrated
component of the stream type peripherals including SD, USB2.0, eMMC,
and MIO-DMAC.

Media I/O block has a common logic to control the component.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext/socionext,uniphier-mioctrl.yaml | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml
new file mode 100644
index 000000000000..2cc38bb5038e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-mioctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier media I/O block (MIO) controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  Media I/O block implemented on Socionext UniPhier SoCs is a legacy
+  integrated component of the stream type peripherals including USB2.0,
+  SD/eMMC, and MIO-DMAC.
+  Media I/O block has a common logic to control the component.
+
+  Recent SoCs have SD interface logic specialized only for SD functions
+  as a subset of media I/O block. See socionext,uniphier-sdctrl.yaml.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-mioctrl
+          - socionext,uniphier-pro4-mioctrl
+          - socionext,uniphier-sld8-mioctrl
+          - socionext,uniphier-ld11-mioctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@5b3e0000 {
+        compatible = "socionext,uniphier-ld11-mioctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x5b3e0000 0x800>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld11-mio-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld11-mio-reset";
+            #reset-cells = <1>;
+            resets = <&sys_rst 7>;
+        };
+    };
+
-- 
2.25.1

[PATCH v3 13/17] dt-bindings: soc: socionext: Add UniPhier media I/O block

[Kunihiko Hayashi]

Add devicetree binding schema for the media I/O block implemented on
Socionext Uniphier SoCs. This block is implemented on LD4, sLD8, Pro4,
and LD11 SoCs.

Media I/O block implemented on Socionext UniPhier SoCs is an integrated
component of the stream type peripherals including SD, USB2.0, eMMC,
and MIO-DMAC.

Media I/O block has a common logic to control the component.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext/socionext,uniphier-mioctrl.yaml | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml
new file mode 100644
index 000000000000..2cc38bb5038e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-mioctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier media I/O block (MIO) controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  Media I/O block implemented on Socionext UniPhier SoCs is a legacy
+  integrated component of the stream type peripherals including USB2.0,
+  SD/eMMC, and MIO-DMAC.
+  Media I/O block has a common logic to control the component.
+
+  Recent SoCs have SD interface logic specialized only for SD functions
+  as a subset of media I/O block. See socionext,uniphier-sdctrl.yaml.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-mioctrl
+          - socionext,uniphier-pro4-mioctrl
+          - socionext,uniphier-sld8-mioctrl
+          - socionext,uniphier-ld11-mioctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@5b3e0000 {
+        compatible = "socionext,uniphier-ld11-mioctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x5b3e0000 0x800>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld11-mio-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld11-mio-reset";
+            #reset-cells = <1>;
+            resets = <&sys_rst 7>;
+        };
+    };
+
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 13/17] dt-bindings: soc: socionext: Add UniPhier media I/O block

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the media I/O block implemented on
> Socionext Uniphier SoCs. This block is implemented on LD4, sLD8, Pro4,
> and LD11 SoCs.
> 
> Media I/O block implemented on Socionext UniPhier SoCs is an integrated
> component of the stream type peripherals including SD, USB2.0, eMMC,
> and MIO-DMAC.
> 
> Media I/O block has a common logic to control the component.
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 13/17] dt-bindings: soc: socionext: Add UniPhier media I/O block

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the media I/O block implemented on
> Socionext Uniphier SoCs. This block is implemented on LD4, sLD8, Pro4,
> and LD11 SoCs.
> 
> Media I/O block implemented on Socionext UniPhier SoCs is an integrated
> component of the stream type peripherals including SD, USB2.0, eMMC,
> and MIO-DMAC.
> 
> Media I/O block has a common logic to control the component.
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 14/17] dt-bindings: soc: socionext: Add UniPhier SD interface block

[Kunihiko Hayashi]

Add devicetree binding schema for the SD interface block implemented on
Socionext Uniphier SoCs.

This SD interface block is attached outside SDHC, and has some SD related
functions such as clock control, reset control, mode switch, and so on.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext/socionext,uniphier-sdctrl.yaml  | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml
new file mode 100644
index 000000000000..cb3b0d42739f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sdctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SD interface logic
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  SD interface logic implemented on Socionext UniPhier SoCs is
+  attached outside SDHC, and has some SD related functions such as
+  clock control, reset control, mode switch, and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro5-sdctrl
+          - socionext,uniphier-pxs2-sdctrl
+          - socionext,uniphier-ld11-sdctrl
+          - socionext,uniphier-ld20-sdctrl
+          - socionext,uniphier-pxs3-sdctrl
+          - socionext,uniphier-nx1-sdctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@59810000 {
+        compatible = "socionext,uniphier-ld20-sdctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x59810000 0x400>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld20-sd-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-sd-reset";
+            #reset-cells = <1>;
+        };
+    };
-- 
2.25.1

[PATCH v3 14/17] dt-bindings: soc: socionext: Add UniPhier SD interface block

[Kunihiko Hayashi]

Add devicetree binding schema for the SD interface block implemented on
Socionext Uniphier SoCs.

This SD interface block is attached outside SDHC, and has some SD related
functions such as clock control, reset control, mode switch, and so on.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext/socionext,uniphier-sdctrl.yaml  | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml
new file mode 100644
index 000000000000..cb3b0d42739f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sdctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SD interface logic
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  SD interface logic implemented on Socionext UniPhier SoCs is
+  attached outside SDHC, and has some SD related functions such as
+  clock control, reset control, mode switch, and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro5-sdctrl
+          - socionext,uniphier-pxs2-sdctrl
+          - socionext,uniphier-ld11-sdctrl
+          - socionext,uniphier-ld20-sdctrl
+          - socionext,uniphier-pxs3-sdctrl
+          - socionext,uniphier-nx1-sdctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@59810000 {
+        compatible = "socionext,uniphier-ld20-sdctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x59810000 0x400>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld20-sd-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-sd-reset";
+            #reset-cells = <1>;
+        };
+    };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 14/17] dt-bindings: soc: socionext: Add UniPhier SD interface block

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the SD interface block implemented on
> Socionext Uniphier SoCs.
> 
> This SD interface block is attached outside SDHC, and has some SD related
> functions such as clock control, reset control, mode switch, and so on.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 14/17] dt-bindings: soc: socionext: Add UniPhier SD interface block

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the SD interface block implemented on
> Socionext Uniphier SoCs.
> 
> This SD interface block is attached outside SDHC, and has some SD related
> functions such as clock control, reset control, mode switch, and so on.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 15/17] dt-bindings: soc: socionext: Add UniPhier ADAMV block

[Kunihiko Hayashi]

Add devicetree binding schema for the ADAMV block implemented on Socionext
Uniphier SoCs.

The ADAMV block is analog signal amplifier that is a part of the external
video and audio I/O system. This block is implemented on LD11 and LD20,
and this is defined for controlling audio I/O reset only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext/socionext,uniphier-adamv.yaml   | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
new file mode 100644
index 000000000000..32d9cc2d72a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-adamv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier ADAMV block
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  ADAMV block implemented on Socionext UniPhier SoCs is an analog signal
+  amplifier that is a part of the external video and audio I/O system.
+
+  This block is defined for controlling audio I/O reset only.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld11-adamv
+          - socionext,uniphier-ld20-adamv
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@57920000 {
+        compatible = "socionext,uniphier-ld20-adamv",
+                     "simple-mfd", "syscon";
+        reg = <0x57920000 0x1000>;
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-adamv-reset";
+            #reset-cells = <1>;
+        };
+    };
-- 
2.25.1

[PATCH v3 15/17] dt-bindings: soc: socionext: Add UniPhier ADAMV block

[Kunihiko Hayashi]

Add devicetree binding schema for the ADAMV block implemented on Socionext
Uniphier SoCs.

The ADAMV block is analog signal amplifier that is a part of the external
video and audio I/O system. This block is implemented on LD11 and LD20,
and this is defined for controlling audio I/O reset only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext/socionext,uniphier-adamv.yaml   | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
new file mode 100644
index 000000000000..32d9cc2d72a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-adamv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier ADAMV block
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  ADAMV block implemented on Socionext UniPhier SoCs is an analog signal
+  amplifier that is a part of the external video and audio I/O system.
+
+  This block is defined for controlling audio I/O reset only.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld11-adamv
+          - socionext,uniphier-ld20-adamv
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@57920000 {
+        compatible = "socionext,uniphier-ld20-adamv",
+                     "simple-mfd", "syscon";
+        reg = <0x57920000 0x1000>;
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-adamv-reset";
+            #reset-cells = <1>;
+        };
+    };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 15/17] dt-bindings: soc: socionext: Add UniPhier ADAMV block

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the ADAMV block implemented on Socionext
> Uniphier SoCs.
> 
> The ADAMV block is analog signal amplifier that is a part of the external
> video and audio I/O system. This block is implemented on LD11 and LD20,
> and this is defined for controlling audio I/O reset only.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 15/17] dt-bindings: soc: socionext: Add UniPhier ADAMV block

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the ADAMV block implemented on Socionext
> Uniphier SoCs.
> 
> The ADAMV block is analog signal amplifier that is a part of the external
> video and audio I/O system. This block is implemented on LD11 and LD20,
> and this is defined for controlling audio I/O reset only.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 16/17] dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer

[Kunihiko Hayashi]

Add DT binding schema for components belonging to the platform-specific
DWC3 USB glue layer implemented in UniPhier SoCs.

This USB glue layer works as a sideband logic for the host controller,
including core reset, vbus control, PHYs, and some signals to the
controller.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-dwc3-glue.yaml         | 106 ++++++++++++++++++
 1 file changed, 106 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
new file mode 100644
index 000000000000..bd0def7236b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC DWC3 USB3.0 glue layer
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is
+  a sideband logic handling signals to DWC3 host controller inside
+  USB3.0 component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro4-dwc3-glue
+          - socionext,uniphier-pro5-dwc3-glue
+          - socionext,uniphier-pxs2-dwc3-glue
+          - socionext,uniphier-ld20-dwc3-glue
+          - socionext,uniphier-pxs3-dwc3-glue
+          - socionext,uniphier-nx1-dwc3-glue
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^reset-controller@[0-9a-f]+$":
+    $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
+
+  "^regulator@[0-9a-f]+$":
+    $ref: /schemas/regulator/socionext,uniphier-regulator.yaml#
+
+  "^phy@[0-9a-f]+$":
+    oneOf:
+      - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
+      - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb@65b00000 {
+        compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
+        reg = <0x65b00000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        reset-controller@0 {
+            compatible = "socionext,uniphier-ld20-usb3-reset";
+            reg = <0x0 0x4>;
+            #reset-cells = <1>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+
+        regulator@100 {
+            compatible = "socionext,uniphier-ld20-usb3-regulator";
+            reg = <0x100 0x10>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+
+        phy@200 {
+            compatible = "socionext,uniphier-ld20-usb3-hsphy";
+            reg = <0x200 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 14>, <&sys_clk 16>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 14>, <&sys_rst 16>;
+        };
+
+        phy@300 {
+            compatible = "socionext,uniphier-ld20-usb3-ssphy";
+            reg = <0x300 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 14>, <&sys_clk 18>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 14>, <&sys_rst 18>;
+        };
+    };
+
-- 
2.25.1

[PATCH v3 16/17] dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer

[Kunihiko Hayashi]

Add DT binding schema for components belonging to the platform-specific
DWC3 USB glue layer implemented in UniPhier SoCs.

This USB glue layer works as a sideband logic for the host controller,
including core reset, vbus control, PHYs, and some signals to the
controller.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-dwc3-glue.yaml         | 106 ++++++++++++++++++
 1 file changed, 106 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
new file mode 100644
index 000000000000..bd0def7236b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC DWC3 USB3.0 glue layer
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is
+  a sideband logic handling signals to DWC3 host controller inside
+  USB3.0 component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro4-dwc3-glue
+          - socionext,uniphier-pro5-dwc3-glue
+          - socionext,uniphier-pxs2-dwc3-glue
+          - socionext,uniphier-ld20-dwc3-glue
+          - socionext,uniphier-pxs3-dwc3-glue
+          - socionext,uniphier-nx1-dwc3-glue
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^reset-controller@[0-9a-f]+$":
+    $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
+
+  "^regulator@[0-9a-f]+$":
+    $ref: /schemas/regulator/socionext,uniphier-regulator.yaml#
+
+  "^phy@[0-9a-f]+$":
+    oneOf:
+      - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
+      - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb@65b00000 {
+        compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
+        reg = <0x65b00000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        reset-controller@0 {
+            compatible = "socionext,uniphier-ld20-usb3-reset";
+            reg = <0x0 0x4>;
+            #reset-cells = <1>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+
+        regulator@100 {
+            compatible = "socionext,uniphier-ld20-usb3-regulator";
+            reg = <0x100 0x10>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+
+        phy@200 {
+            compatible = "socionext,uniphier-ld20-usb3-hsphy";
+            reg = <0x200 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 14>, <&sys_clk 16>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 14>, <&sys_rst 16>;
+        };
+
+        phy@300 {
+            compatible = "socionext,uniphier-ld20-usb3-ssphy";
+            reg = <0x300 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 14>, <&sys_clk 18>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 14>, <&sys_rst 18>;
+        };
+    };
+
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 16/17] dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add DT binding schema for components belonging to the platform-specific
> DWC3 USB glue layer implemented in UniPhier SoCs.
> 
> This USB glue layer works as a sideband logic for the host controller,
> including core reset, vbus control, PHYs, and some signals to the
> controller.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../socionext,uniphier-dwc3-glue.yaml         | 106 ++++++++++++++++++
>  1 file changed, 106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
> new file mode 100644
> index 000000000000..bd0def7236b5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
> @@ -0,0 +1,106 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 16/17] dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add DT binding schema for components belonging to the platform-specific
> DWC3 USB glue layer implemented in UniPhier SoCs.
> 
> This USB glue layer works as a sideband logic for the host controller,
> including core reset, vbus control, PHYs, and some signals to the
> controller.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../socionext,uniphier-dwc3-glue.yaml         | 106 ++++++++++++++++++
>  1 file changed, 106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
> new file mode 100644
> index 000000000000..bd0def7236b5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
> @@ -0,0 +1,106 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 17/17] dt-bindings: soc: socionext: Add UniPhier AHCI glue layer

[Kunihiko Hayashi]

Add DT binding schema for components belonging to the platform-specific
AHCI glue layer implemented in UniPhier SoCs.

This AHCI glue layer works as a sideband logic for the host controller,
including core reset, PHYs, and some signals to the controller.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-ahci-glue.yaml         | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml
new file mode 100644
index 000000000000..09f861cc068f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-ahci-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC AHCI glue layer
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  AHCI glue layer implemented on Socionext UniPhier SoCs is a sideband
+  logic handling signals to AHCI host controller inside AHCI component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro4-ahci-glue
+          - socionext,uniphier-pxs2-ahci-glue
+          - socionext,uniphier-pxs3-ahci-glue
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^reset-controller@[0-9a-f]+$":
+    $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
+
+  "phy@[0-9a-f]+$":
+    $ref: /schemas/phy/socionext,uniphier-ahci-phy.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sata-controller@65700000 {
+        compatible = "socionext,uniphier-pxs3-ahci-glue", "simple-mfd";
+        reg = <0x65b00000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65700000 0x100>;
+
+        reset-controller@0 {
+            compatible = "socionext,uniphier-pxs3-ahci-reset";
+            reg = <0x0 0x4>;
+            clock-names = "link";
+            clocks = <&sys_clk 28>;
+            reset-names = "link";
+            resets = <&sys_rst 28>;
+            #reset-cells = <1>;
+        };
+
+        phy@10 {
+            compatible = "socionext,uniphier-pxs3-ahci-phy";
+            reg = <0x10 0x10>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 28>, <&sys_clk 30>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 28>, <&sys_rst 30>;
+            #phy-cells = <0>;
+        };
+    };
-- 
2.25.1

[PATCH v3 17/17] dt-bindings: soc: socionext: Add UniPhier AHCI glue layer

[Kunihiko Hayashi]

Add DT binding schema for components belonging to the platform-specific
AHCI glue layer implemented in UniPhier SoCs.

This AHCI glue layer works as a sideband logic for the host controller,
including core reset, PHYs, and some signals to the controller.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext,uniphier-ahci-glue.yaml         | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml
new file mode 100644
index 000000000000..09f861cc068f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-ahci-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC AHCI glue layer
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  AHCI glue layer implemented on Socionext UniPhier SoCs is a sideband
+  logic handling signals to AHCI host controller inside AHCI component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro4-ahci-glue
+          - socionext,uniphier-pxs2-ahci-glue
+          - socionext,uniphier-pxs3-ahci-glue
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^reset-controller@[0-9a-f]+$":
+    $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
+
+  "phy@[0-9a-f]+$":
+    $ref: /schemas/phy/socionext,uniphier-ahci-phy.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sata-controller@65700000 {
+        compatible = "socionext,uniphier-pxs3-ahci-glue", "simple-mfd";
+        reg = <0x65b00000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65700000 0x100>;
+
+        reset-controller@0 {
+            compatible = "socionext,uniphier-pxs3-ahci-reset";
+            reg = <0x0 0x4>;
+            clock-names = "link";
+            clocks = <&sys_clk 28>;
+            reset-names = "link";
+            resets = <&sys_rst 28>;
+            #reset-cells = <1>;
+        };
+
+        phy@10 {
+            compatible = "socionext,uniphier-pxs3-ahci-phy";
+            reg = <0x10 0x10>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 28>, <&sys_clk 30>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 28>, <&sys_rst 30>;
+            #phy-cells = <0>;
+        };
+    };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 17/17] dt-bindings: soc: socionext: Add UniPhier AHCI glue layer

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add DT binding schema for components belonging to the platform-specific
> AHCI glue layer implemented in UniPhier SoCs.
> 
> This AHCI glue layer works as a sideband logic for the host controller,
> including core reset, PHYs, and some signals to the controller.
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 17/17] dt-bindings: soc: socionext: Add UniPhier AHCI glue layer

[Krzysztof Kozlowski]

On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Add DT binding schema for components belonging to the platform-specific
> AHCI glue layer implemented in UniPhier SoCs.
> 
> This AHCI glue layer works as a sideband logic for the host controller,
> including core reset, PHYs, and some signals to the controller.
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Rob Herring]

On Tue, Dec 13, 2022 at 05:24:32PM +0900, Kunihiko Hayashi wrote:
> This series introduces dt-bindings documents for miscellaneous register
> blocks implemented in Socionext UniPhier SoCs.
> 
> These are previously defined in the devicetree and used in the examples
> of subnodes' dt-bindings, however, not documented.
> 
> These include two types of the blocks
> 
> * independent block including miscellaneous registers and functions for
>   the whole SoC (system controller and SoC-glue logic)
> 
> * sideband logic including control registers in the component (others)
> 
> And prior to adding these dt-bindings, fix examples in the existing
> dt-bindings.
> 
> This series is part of the previous series shown below:
> https://lore.kernel.org/linux-arm-kernel/20221107103410.3443-2-hayashi.kunihiko@socionext.com
> 
> Changes since v2:
> - Drop redundant nodes in examples (clock, reset, soc-glue-debug)
> - Drop parent node in examples
> - Add more properties to examples for pinctrl
> - Add a patch for regulator change
> - Use consistent quotes
> - Drop unit address patterns of patternProperties
> - Mandatory unit address pattern for efuse (soc-glue-debug)
> - Fix additionalProperties (ahci-glue)
> 
> Changes since v1:
> - Fix examples in the existing dt-bindings (Add PATCH 1-7)
> - Add dt-bindings for SoC-glue logic debug part (Add PATCH 10)
> - Drop generic and ld6b compatible strings
> - Change "usb-controller" node in soc-glue to "usb-hub"
> - Change "usb-controller" node in USB glue layer example to "usb"
> - Add negation of child properties by compatible string
> 
> Kunihiko Hayashi (17):
>   dt-bindings: clock: Fix node descriptions in uniphier-clock example
>   dt-bindings: reset: Fix node descriptions in uniphier-reset example
>   dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl
>     example
>   dt-bindings: regulator: Fix node descriptions in uniphier-regulator
>     example
>   dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example
>   dt-bindings: thermal: Fix node descriptions in uniphier-thermal
>     example
>   dt-bindings: phy: Fix node descriptions in uniphier-phy example
>   dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example
>   dt-bindings: soc: socionext: Add UniPhier system controller
>   dt-bindings: soc: socionext: Add UniPhier SoC-glue logic
>   dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part
>   dt-bindings: soc: socionext: Add UniPhier peripheral block
>   dt-bindings: soc: socionext: Add UniPhier media I/O block
>   dt-bindings: soc: socionext: Add UniPhier SD interface block
>   dt-bindings: soc: socionext: Add UniPhier ADAMV block
>   dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
>   dt-bindings: soc: socionext: Add UniPhier AHCI glue layer

You sent this To me, so I'm assuming you want me to apply it?
Otherwise, it can go via the Socionext tree. Let me know and I can fix 
up Krzysztof's comments and apply the series.

Rob

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Rob Herring]

On Tue, Dec 13, 2022 at 05:24:32PM +0900, Kunihiko Hayashi wrote:
> This series introduces dt-bindings documents for miscellaneous register
> blocks implemented in Socionext UniPhier SoCs.
> 
> These are previously defined in the devicetree and used in the examples
> of subnodes' dt-bindings, however, not documented.
> 
> These include two types of the blocks
> 
> * independent block including miscellaneous registers and functions for
>   the whole SoC (system controller and SoC-glue logic)
> 
> * sideband logic including control registers in the component (others)
> 
> And prior to adding these dt-bindings, fix examples in the existing
> dt-bindings.
> 
> This series is part of the previous series shown below:
> https://lore.kernel.org/linux-arm-kernel/20221107103410.3443-2-hayashi.kunihiko@socionext.com
> 
> Changes since v2:
> - Drop redundant nodes in examples (clock, reset, soc-glue-debug)
> - Drop parent node in examples
> - Add more properties to examples for pinctrl
> - Add a patch for regulator change
> - Use consistent quotes
> - Drop unit address patterns of patternProperties
> - Mandatory unit address pattern for efuse (soc-glue-debug)
> - Fix additionalProperties (ahci-glue)
> 
> Changes since v1:
> - Fix examples in the existing dt-bindings (Add PATCH 1-7)
> - Add dt-bindings for SoC-glue logic debug part (Add PATCH 10)
> - Drop generic and ld6b compatible strings
> - Change "usb-controller" node in soc-glue to "usb-hub"
> - Change "usb-controller" node in USB glue layer example to "usb"
> - Add negation of child properties by compatible string
> 
> Kunihiko Hayashi (17):
>   dt-bindings: clock: Fix node descriptions in uniphier-clock example
>   dt-bindings: reset: Fix node descriptions in uniphier-reset example
>   dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl
>     example
>   dt-bindings: regulator: Fix node descriptions in uniphier-regulator
>     example
>   dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example
>   dt-bindings: thermal: Fix node descriptions in uniphier-thermal
>     example
>   dt-bindings: phy: Fix node descriptions in uniphier-phy example
>   dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example
>   dt-bindings: soc: socionext: Add UniPhier system controller
>   dt-bindings: soc: socionext: Add UniPhier SoC-glue logic
>   dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part
>   dt-bindings: soc: socionext: Add UniPhier peripheral block
>   dt-bindings: soc: socionext: Add UniPhier media I/O block
>   dt-bindings: soc: socionext: Add UniPhier SD interface block
>   dt-bindings: soc: socionext: Add UniPhier ADAMV block
>   dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
>   dt-bindings: soc: socionext: Add UniPhier AHCI glue layer

You sent this To me, so I'm assuming you want me to apply it?
Otherwise, it can go via the Socionext tree. Let me know and I can fix 
up Krzysztof's comments and apply the series.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Kunihiko Hayashi]

Hi Rob,

On 2022/12/20 0:49, Rob Herring wrote:
> On Tue, Dec 13, 2022 at 05:24:32PM +0900, Kunihiko Hayashi wrote:
>> This series introduces dt-bindings documents for miscellaneous register
>> blocks implemented in Socionext UniPhier SoCs.
>>
>> These are previously defined in the devicetree and used in the examples
>> of subnodes' dt-bindings, however, not documented.
>>
>> These include two types of the blocks
>>
>> * independent block including miscellaneous registers and functions for
>>    the whole SoC (system controller and SoC-glue logic)
>>
>> * sideband logic including control registers in the component (others)
>>
>> And prior to adding these dt-bindings, fix examples in the existing
>> dt-bindings.
>>
>> This series is part of the previous series shown below:
>>
> https://lore.kernel.org/linux-arm-kernel/20221107103410.3443-2-hayashi.kun
> ihiko@socionext.com
>>
>> Changes since v2:
>> - Drop redundant nodes in examples (clock, reset, soc-glue-debug)
>> - Drop parent node in examples
>> - Add more properties to examples for pinctrl
>> - Add a patch for regulator change
>> - Use consistent quotes
>> - Drop unit address patterns of patternProperties
>> - Mandatory unit address pattern for efuse (soc-glue-debug)
>> - Fix additionalProperties (ahci-glue)
>>
>> Changes since v1:
>> - Fix examples in the existing dt-bindings (Add PATCH 1-7)
>> - Add dt-bindings for SoC-glue logic debug part (Add PATCH 10)
>> - Drop generic and ld6b compatible strings
>> - Change "usb-controller" node in soc-glue to "usb-hub"
>> - Change "usb-controller" node in USB glue layer example to "usb"
>> - Add negation of child properties by compatible string
>>
>> Kunihiko Hayashi (17):
>>    dt-bindings: clock: Fix node descriptions in uniphier-clock example
>>    dt-bindings: reset: Fix node descriptions in uniphier-reset example
>>    dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl
>>      example
>>    dt-bindings: regulator: Fix node descriptions in uniphier-regulator
>>      example
>>    dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example
>>    dt-bindings: thermal: Fix node descriptions in uniphier-thermal
>>      example
>>    dt-bindings: phy: Fix node descriptions in uniphier-phy example
>>    dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example
>>    dt-bindings: soc: socionext: Add UniPhier system controller
>>    dt-bindings: soc: socionext: Add UniPhier SoC-glue logic
>>    dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part
>>    dt-bindings: soc: socionext: Add UniPhier peripheral block
>>    dt-bindings: soc: socionext: Add UniPhier media I/O block
>>    dt-bindings: soc: socionext: Add UniPhier SD interface block
>>    dt-bindings: soc: socionext: Add UniPhier ADAMV block
>>    dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
>>    dt-bindings: soc: socionext: Add UniPhier AHCI glue layer
> 
> You sent this To me, so I'm assuming you want me to apply it?
 > Otherwise, it can go via the Socionext tree. Let me know and I can fix
 > up Krzysztof's comments and apply the series.

Currently I don't have the Socionext tree for pull-request,
so I'd be happy if you could fix up the comments and apply the series.

Thank you,

---
Best Regards
Kunihiko Hayashi

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Kunihiko Hayashi]

Hi Rob,

On 2022/12/20 0:49, Rob Herring wrote:
> On Tue, Dec 13, 2022 at 05:24:32PM +0900, Kunihiko Hayashi wrote:
>> This series introduces dt-bindings documents for miscellaneous register
>> blocks implemented in Socionext UniPhier SoCs.
>>
>> These are previously defined in the devicetree and used in the examples
>> of subnodes' dt-bindings, however, not documented.
>>
>> These include two types of the blocks
>>
>> * independent block including miscellaneous registers and functions for
>>    the whole SoC (system controller and SoC-glue logic)
>>
>> * sideband logic including control registers in the component (others)
>>
>> And prior to adding these dt-bindings, fix examples in the existing
>> dt-bindings.
>>
>> This series is part of the previous series shown below:
>>
> https://lore.kernel.org/linux-arm-kernel/20221107103410.3443-2-hayashi.kun
> ihiko@socionext.com
>>
>> Changes since v2:
>> - Drop redundant nodes in examples (clock, reset, soc-glue-debug)
>> - Drop parent node in examples
>> - Add more properties to examples for pinctrl
>> - Add a patch for regulator change
>> - Use consistent quotes
>> - Drop unit address patterns of patternProperties
>> - Mandatory unit address pattern for efuse (soc-glue-debug)
>> - Fix additionalProperties (ahci-glue)
>>
>> Changes since v1:
>> - Fix examples in the existing dt-bindings (Add PATCH 1-7)
>> - Add dt-bindings for SoC-glue logic debug part (Add PATCH 10)
>> - Drop generic and ld6b compatible strings
>> - Change "usb-controller" node in soc-glue to "usb-hub"
>> - Change "usb-controller" node in USB glue layer example to "usb"
>> - Add negation of child properties by compatible string
>>
>> Kunihiko Hayashi (17):
>>    dt-bindings: clock: Fix node descriptions in uniphier-clock example
>>    dt-bindings: reset: Fix node descriptions in uniphier-reset example
>>    dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl
>>      example
>>    dt-bindings: regulator: Fix node descriptions in uniphier-regulator
>>      example
>>    dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example
>>    dt-bindings: thermal: Fix node descriptions in uniphier-thermal
>>      example
>>    dt-bindings: phy: Fix node descriptions in uniphier-phy example
>>    dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example
>>    dt-bindings: soc: socionext: Add UniPhier system controller
>>    dt-bindings: soc: socionext: Add UniPhier SoC-glue logic
>>    dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part
>>    dt-bindings: soc: socionext: Add UniPhier peripheral block
>>    dt-bindings: soc: socionext: Add UniPhier media I/O block
>>    dt-bindings: soc: socionext: Add UniPhier SD interface block
>>    dt-bindings: soc: socionext: Add UniPhier ADAMV block
>>    dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
>>    dt-bindings: soc: socionext: Add UniPhier AHCI glue layer
> 
> You sent this To me, so I'm assuming you want me to apply it?
 > Otherwise, it can go via the Socionext tree. Let me know and I can fix
 > up Krzysztof's comments and apply the series.

Currently I don't have the Socionext tree for pull-request,
so I'd be happy if you could fix up the comments and apply the series.

Thank you,

---
Best Regards
Kunihiko Hayashi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Kunihiko Hayashi]

Hi Rob,

On 2022/12/20 10:13, Kunihiko Hayashi wrote:

>> You sent this To me, so I'm assuming you want me to apply it?
>> Otherwise, it can go via the Socionext tree. Let me know and I can fix
>> up Krzysztof's comments and apply the series.
> 
> Currently I don't have the Socionext tree for pull-request,
> so I'd be happy if you could fix up the comments and apply the series.
Could you please do the above?
Or should I submit the fixed v4 to soc@kernel.org and request a merge of
this series?

After fixing the dt-bindings in this series, I'll continue to submit patch
series to update the devicetree.

Thank you,

---
Best Regards
Kunihiko Hayashi

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Kunihiko Hayashi]

Hi Rob,

On 2022/12/20 10:13, Kunihiko Hayashi wrote:

>> You sent this To me, so I'm assuming you want me to apply it?
>> Otherwise, it can go via the Socionext tree. Let me know and I can fix
>> up Krzysztof's comments and apply the series.
> 
> Currently I don't have the Socionext tree for pull-request,
> so I'd be happy if you could fix up the comments and apply the series.
Could you please do the above?
Or should I submit the fixed v4 to soc@kernel.org and request a merge of
this series?

After fixing the dt-bindings in this series, I'll continue to submit patch
series to update the devicetree.

Thank you,

---
Best Regards
Kunihiko Hayashi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Rob Herring]

On Thu, Jan 19, 2023 at 2:22 AM Kunihiko Hayashi
<hayashi.kunihiko@socionext.com> wrote:
>
> Hi Rob,
>
> On 2022/12/20 10:13, Kunihiko Hayashi wrote:
>
> >> You sent this To me, so I'm assuming you want me to apply it?
> >> Otherwise, it can go via the Socionext tree. Let me know and I can fix
> >> up Krzysztof's comments and apply the series.
> >
> > Currently I don't have the Socionext tree for pull-request,
> > so I'd be happy if you could fix up the comments and apply the series.
> Could you please do the above?

Yes, I've already applied this.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Rob Herring]

On Thu, Jan 19, 2023 at 2:22 AM Kunihiko Hayashi
<hayashi.kunihiko@socionext.com> wrote:
>
> Hi Rob,
>
> On 2022/12/20 10:13, Kunihiko Hayashi wrote:
>
> >> You sent this To me, so I'm assuming you want me to apply it?
> >> Otherwise, it can go via the Socionext tree. Let me know and I can fix
> >> up Krzysztof's comments and apply the series.
> >
> > Currently I don't have the Socionext tree for pull-request,
> > so I'd be happy if you could fix up the comments and apply the series.
> Could you please do the above?

Yes, I've already applied this.

Rob

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Kunihiko Hayashi]

On 2023/01/20 4:57, Rob Herring wrote:
> On Thu, Jan 19, 2023 at 2:22 AM Kunihiko Hayashi
> <hayashi.kunihiko@socionext.com> wrote:
>>
>> Hi Rob,
>>
>> On 2022/12/20 10:13, Kunihiko Hayashi wrote:
>>
>>>> You sent this To me, so I'm assuming you want me to apply it?
>>>> Otherwise, it can go via the Socionext tree. Let me know and I can fix
>>>> up Krzysztof's comments and apply the series.
>>>
>>> Currently I don't have the Socionext tree for pull-request,
>>> so I'd be happy if you could fix up the comments and apply the series.
>> Could you please do the above?
> 
> Yes, I've already applied this.
Thanks a lot for your help!

---
Best Regards
Kunihiko Hayashi

Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Kunihiko Hayashi]

On 2023/01/20 4:57, Rob Herring wrote:
> On Thu, Jan 19, 2023 at 2:22 AM Kunihiko Hayashi
> <hayashi.kunihiko@socionext.com> wrote:
>>
>> Hi Rob,
>>
>> On 2022/12/20 10:13, Kunihiko Hayashi wrote:
>>
>>>> You sent this To me, so I'm assuming you want me to apply it?
>>>> Otherwise, it can go via the Socionext tree. Let me know and I can fix
>>>> up Krzysztof's comments and apply the series.
>>>
>>> Currently I don't have the Socionext tree for pull-request,
>>> so I'd be happy if you could fix up the comments and apply the series.
>> Could you please do the above?
> 
> Yes, I've already applied this.
Thanks a lot for your help!

---
Best Regards
Kunihiko Hayashi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel