[PATCH AUTOSEL 5.10 01/39] drm/etnaviv: add missing quirks for GC300

[PATCH AUTOSEL 5.10 01/39] drm/etnaviv: add missing quirks for GC300

[Sasha Levin]

From: Doug Brown <doug@schmorgal.com>

[ Upstream commit cc7d3fb446a91f24978a6aa59cbb578f92e22242 ]

The GC300's features register doesn't specify that a 2D pipe is
available, and like the GC600, its idle register reports zero bits where
modules aren't present.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index 2520b7dad6ce..f3281d56b1d8 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -408,6 +408,12 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu)
 	if (gpu->identity.model == chipModel_GC700)
 		gpu->identity.features &= ~chipFeatures_FAST_CLEAR;
 
+	/* These models/revisions don't have the 2D pipe bit */
+	if ((gpu->identity.model == chipModel_GC500 &&
+	     gpu->identity.revision <= 2) ||
+	    gpu->identity.model == chipModel_GC300)
+		gpu->identity.features |= chipFeatures_PIPE_2D;
+
 	if ((gpu->identity.model == chipModel_GC500 &&
 	     gpu->identity.revision < 2) ||
 	    (gpu->identity.model == chipModel_GC300 &&
@@ -441,8 +447,9 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu)
 				gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_5);
 	}
 
-	/* GC600 idle register reports zero bits where modules aren't present */
-	if (gpu->identity.model == chipModel_GC600)
+	/* GC600/300 idle register reports zero bits where modules aren't present */
+	if (gpu->identity.model == chipModel_GC600 ||
+	    gpu->identity.model == chipModel_GC300)
 		gpu->idle_mask = VIVS_HI_IDLE_STATE_TX |
 				 VIVS_HI_IDLE_STATE_RA |
 				 VIVS_HI_IDLE_STATE_SE |
-- 
2.35.1

[PATCH AUTOSEL 5.10 01/39] drm/etnaviv: add missing quirks for GC300

[Sasha Levin]

From: Doug Brown <doug@schmorgal.com>

[ Upstream commit cc7d3fb446a91f24978a6aa59cbb578f92e22242 ]

The GC300's features register doesn't specify that a 2D pipe is
available, and like the GC600, its idle register reports zero bits where
modules aren't present.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index 2520b7dad6ce..f3281d56b1d8 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -408,6 +408,12 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu)
 	if (gpu->identity.model == chipModel_GC700)
 		gpu->identity.features &= ~chipFeatures_FAST_CLEAR;
 
+	/* These models/revisions don't have the 2D pipe bit */
+	if ((gpu->identity.model == chipModel_GC500 &&
+	     gpu->identity.revision <= 2) ||
+	    gpu->identity.model == chipModel_GC300)
+		gpu->identity.features |= chipFeatures_PIPE_2D;
+
 	if ((gpu->identity.model == chipModel_GC500 &&
 	     gpu->identity.revision < 2) ||
 	    (gpu->identity.model == chipModel_GC300 &&
@@ -441,8 +447,9 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu)
 				gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_5);
 	}
 
-	/* GC600 idle register reports zero bits where modules aren't present */
-	if (gpu->identity.model == chipModel_GC600)
+	/* GC600/300 idle register reports zero bits where modules aren't present */
+	if (gpu->identity.model == chipModel_GC600 ||
+	    gpu->identity.model == chipModel_GC300)
 		gpu->idle_mask = VIVS_HI_IDLE_STATE_TX |
 				 VIVS_HI_IDLE_STATE_RA |
 				 VIVS_HI_IDLE_STATE_SE |
-- 
2.35.1

[PATCH AUTOSEL 5.10 02/39] brcmfmac: return error when getting invalid max_flowrings from dongle

[Sasha Levin]

From: Wright Feng <wright.feng@cypress.com>

[ Upstream commit 2aca4f3734bd717e04943ddf340d49ab62299a00 ]

When firmware hit trap at initialization, host will read abnormal
max_flowrings number from dongle, and it will cause kernel panic when
doing iowrite to initialize dongle ring.
To detect this error at early stage, we directly return error when getting
invalid max_flowrings(>256).

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220929031001.9962-3-ian.lin@infineon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 61febc9bfa14..4f419e8e3640 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1109,6 +1109,10 @@ static int brcmf_pcie_init_ringbuffers(struct brcmf_pciedev_info *devinfo)
 				BRCMF_NROF_H2D_COMMON_MSGRINGS;
 		max_completionrings = BRCMF_NROF_D2H_COMMON_MSGRINGS;
 	}
+	if (max_flowrings > 256) {
+		brcmf_err(bus, "invalid max_flowrings(%d)\n", max_flowrings);
+		return -EIO;
+	}
 
 	if (devinfo->dma_idx_sz != 0) {
 		bufsz = (max_submissionrings + max_completionrings) *
-- 
2.35.1

[PATCH AUTOSEL 5.10 03/39] wifi: ath9k: verify the expected usb_endpoints are present

[Sasha Levin]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit 16ef02bad239f11f322df8425d302be62f0443ce ]

The bug arises when a USB device claims to be an ATH9K but doesn't
have the expected endpoints. (In this case there was an interrupt
endpoint where the driver expected a bulk endpoint.) The kernel
needs to be able to handle such devices without getting an internal error.

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events request_firmware_work_func
RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Call Trace:
 ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline]
 ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019
 ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline]
 ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242
 request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097
 process_one_work+0x9af/0x1600 kernel/workqueue.c:2279
 worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425
 kthread+0x3b4/0x4a0 kernel/kthread.c:313
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221008211532.74583-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index f06eec99de68..31d4c0454afa 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1330,10 +1330,24 @@ static int send_eject_command(struct usb_interface *interface)
 static int ath9k_hif_usb_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in, *int_out;
 	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *alt;
 	struct hif_device_usb *hif_dev;
 	int ret = 0;
 
+	/* Verify the expected endpoints are present */
+	alt = interface->cur_altsetting;
+	if (usb_find_common_endpoints(alt, &bulk_in, &bulk_out, &int_in, &int_out) < 0 ||
+	    usb_endpoint_num(bulk_in) != USB_WLAN_RX_PIPE ||
+	    usb_endpoint_num(bulk_out) != USB_WLAN_TX_PIPE ||
+	    usb_endpoint_num(int_in) != USB_REG_IN_PIPE ||
+	    usb_endpoint_num(int_out) != USB_REG_OUT_PIPE) {
+		dev_err(&udev->dev,
+			"ath9k_htc: Device endpoint numbers are not the expected ones\n");
+		return -ENODEV;
+	}
+
 	if (id->driver_info == STORAGE_DEVICE)
 		return send_eject_command(interface);
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 04/39] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out

[Sasha Levin]

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit b6702a942a069c2a975478d719e98d83cdae1797 ]

syzkaller reported use-after-free with the stack trace like below [1]:

[   38.960489][    C3] ==================================================================
[   38.963216][    C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240
[   38.964950][    C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0
[   38.966363][    C3]
[   38.967053][    C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18
[   38.968464][    C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[   38.969959][    C3] Call Trace:
[   38.970841][    C3]  <IRQ>
[   38.971663][    C3]  dump_stack_lvl+0xfc/0x174
[   38.972620][    C3]  print_report.cold+0x2c3/0x752
[   38.973626][    C3]  ? ar5523_cmd_tx_cb+0x220/0x240
[   38.974644][    C3]  kasan_report+0xb1/0x1d0
[   38.975720][    C3]  ? ar5523_cmd_tx_cb+0x220/0x240
[   38.976831][    C3]  ar5523_cmd_tx_cb+0x220/0x240
[   38.978412][    C3]  __usb_hcd_giveback_urb+0x353/0x5b0
[   38.979755][    C3]  usb_hcd_giveback_urb+0x385/0x430
[   38.981266][    C3]  dummy_timer+0x140c/0x34e0
[   38.982925][    C3]  ? notifier_call_chain+0xb5/0x1e0
[   38.984761][    C3]  ? rcu_read_lock_sched_held+0xb/0x60
[   38.986242][    C3]  ? lock_release+0x51c/0x790
[   38.987323][    C3]  ? _raw_read_unlock_irqrestore+0x37/0x70
[   38.988483][    C3]  ? __wake_up_common_lock+0xde/0x130
[   38.989621][    C3]  ? reacquire_held_locks+0x4a0/0x4a0
[   38.990777][    C3]  ? lock_acquire+0x472/0x550
[   38.991919][    C3]  ? rcu_read_lock_sched_held+0xb/0x60
[   38.993138][    C3]  ? lock_acquire+0x472/0x550
[   38.994890][    C3]  ? dummy_urb_enqueue+0x860/0x860
[   38.996266][    C3]  ? do_raw_spin_unlock+0x16f/0x230
[   38.997670][    C3]  ? dummy_urb_enqueue+0x860/0x860
[   38.999116][    C3]  call_timer_fn+0x1a0/0x6a0
[   39.000668][    C3]  ? add_timer_on+0x4a0/0x4a0
[   39.002137][    C3]  ? reacquire_held_locks+0x4a0/0x4a0
[   39.003809][    C3]  ? __next_timer_interrupt+0x226/0x2a0
[   39.005509][    C3]  __run_timers.part.0+0x69a/0xac0
[   39.007025][    C3]  ? dummy_urb_enqueue+0x860/0x860
[   39.008716][    C3]  ? call_timer_fn+0x6a0/0x6a0
[   39.010254][    C3]  ? cpuacct_percpu_seq_show+0x10/0x10
[   39.011795][    C3]  ? kvm_sched_clock_read+0x14/0x40
[   39.013277][    C3]  ? sched_clock_cpu+0x69/0x2b0
[   39.014724][    C3]  run_timer_softirq+0xb6/0x1d0
[   39.016196][    C3]  __do_softirq+0x1d2/0x9be
[   39.017616][    C3]  __irq_exit_rcu+0xeb/0x190
[   39.019004][    C3]  irq_exit_rcu+0x5/0x20
[   39.020361][    C3]  sysvec_apic_timer_interrupt+0x8f/0xb0
[   39.021965][    C3]  </IRQ>
[   39.023237][    C3]  <TASK>

In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below
(there are other functions which finally call ar5523_cmd()):

ar5523_probe()
-> ar5523_host_available()
   -> ar5523_cmd_read()
      -> ar5523_cmd()

If ar5523_cmd() timed out, then ar5523_host_available() failed and
ar5523_probe() freed the device structure.  So, ar5523_cmd_tx_cb()
might touch the freed structure.

This patch fixes this issue by canceling in-flight tx cmd if submitted
urb timed out.

Link: https://syzkaller.appspot.com/bug?id=9e12b2d54300842b71bdd18b54971385ff0d0d3a [1]
Reported-by: syzbot+95001b1fd6dfcc716c29@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221009183223.420015-1-syoshida@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ar5523/ar5523.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 1baec4b412c8..efe38b2c1df7 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -241,6 +241,11 @@ static void ar5523_cmd_tx_cb(struct urb *urb)
 	}
 }
 
+static void ar5523_cancel_tx_cmd(struct ar5523 *ar)
+{
+	usb_kill_urb(ar->tx_cmd.urb_tx);
+}
+
 static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
 		      int ilen, void *odata, int olen, int flags)
 {
@@ -280,6 +285,7 @@ static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
 	}
 
 	if (!wait_for_completion_timeout(&cmd->done, 2 * HZ)) {
+		ar5523_cancel_tx_cmd(ar);
 		cmd->odata = NULL;
 		ar5523_err(ar, "timeout waiting for command %02x reply\n",
 			   code);
-- 
2.35.1

[PATCH AUTOSEL 5.10 05/39] ASoC: codecs: rt298: Add quirk for KBL-R RVP platform

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 953dbd1cef18ce9ac0d69c1bd735b929fe52a17e ]

KBL-R RVP platforms also use combojack, so we need to enable that
configuration for them.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt298.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/codecs/rt298.c b/sound/soc/codecs/rt298.c
index dc0273a5a11f..1ca06213e3a3 100644
--- a/sound/soc/codecs/rt298.c
+++ b/sound/soc/codecs/rt298.c
@@ -1168,6 +1168,13 @@ static const struct dmi_system_id force_combo_jack_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Geminilake")
 		}
 	},
+	{
+		.ident = "Intel Kabylake R RVP",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Kabylake Client platform")
+		}
+	},
 	{ }
 };
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 05/39] ASoC: codecs: rt298: Add quirk for KBL-R RVP platform

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 953dbd1cef18ce9ac0d69c1bd735b929fe52a17e ]

KBL-R RVP platforms also use combojack, so we need to enable that
configuration for them.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt298.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/codecs/rt298.c b/sound/soc/codecs/rt298.c
index dc0273a5a11f..1ca06213e3a3 100644
--- a/sound/soc/codecs/rt298.c
+++ b/sound/soc/codecs/rt298.c
@@ -1168,6 +1168,13 @@ static const struct dmi_system_id force_combo_jack_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Geminilake")
 		}
 	},
+	{
+		.ident = "Intel Kabylake R RVP",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Kabylake Client platform")
+		}
+	},
 	{ }
 };
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 06/39] ipmi: fix memleak when unload ipmi driver

[Sasha Levin]

From: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>

[ Upstream commit 36992eb6b9b83f7f9cdc8e74fb5799d7b52e83e9 ]

After the IPMI disconnect problem, the memory kept rising and we tried
to unload the driver to free the memory. However, only part of the
free memory is recovered after the driver is uninstalled. Using
ebpf to hook free functions, we find that neither ipmi_user nor
ipmi_smi_msg is free, only ipmi_recv_msg is free.

We find that the deliver_smi_err_response call in clean_smi_msgs does
the destroy processing on each message from the xmit_msg queue without
checking the return value and free ipmi_smi_msg.

deliver_smi_err_response is called only at this location. Adding the
free handling has no effect.

To verify, try using ebpf to trace the free function.

  $ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc rcv
      %p\n",retval);} kprobe:free_recv_msg {printf("free recv %p\n",
      arg0)} kretprobe:ipmi_alloc_smi_msg {printf("alloc smi %p\n",
        retval);} kprobe:free_smi_msg {printf("free smi  %p\n",arg0)}'

Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-4-zhangyuchen.lcr@bytedance.com>
[Fixed the comment above handle_one_recv_msg().]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_msghandler.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 05e7339752ac..223b90247648 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3540,12 +3540,16 @@ static void deliver_smi_err_response(struct ipmi_smi *intf,
 				     struct ipmi_smi_msg *msg,
 				     unsigned char err)
 {
+	int rv;
 	msg->rsp[0] = msg->data[0] | 4;
 	msg->rsp[1] = msg->data[1];
 	msg->rsp[2] = err;
 	msg->rsp_size = 3;
-	/* It's an error, so it will never requeue, no need to check return. */
-	handle_one_recv_msg(intf, msg);
+
+	/* This will never requeue, but it may ask us to free the message. */
+	rv = handle_one_recv_msg(intf, msg);
+	if (rv == 0)
+		ipmi_free_smi_msg(msg);
 }
 
 static void cleanup_smi_msgs(struct ipmi_smi *intf)
-- 
2.35.1

[PATCH AUTOSEL 5.10 07/39] drm/amd/display: prevent memory leak

[Sasha Levin]

From: gehao <gehao@kylinos.cn>

[ Upstream commit d232afb1f3417ae8194ccf19ad3a8360e70e104e ]

In dce6(0,1,4)_create_resource_pool and dce80_create_resource_pool
the allocated memory should be released if construct pool fails.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: gehao <gehao@kylinos.cn>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c | 3 +++
 drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
index 5a5a9cb77acb..bcdd8a958fc0 100644
--- a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
@@ -1132,6 +1132,7 @@ struct resource_pool *dce60_create_resource_pool(
 	if (dce60_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1329,6 +1330,7 @@ struct resource_pool *dce61_create_resource_pool(
 	if (dce61_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1522,6 +1524,7 @@ struct resource_pool *dce64_create_resource_pool(
 	if (dce64_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
index a19be9de2df7..2eefa07762ae 100644
--- a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
@@ -1141,6 +1141,7 @@ struct resource_pool *dce80_create_resource_pool(
 	if (dce80_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1338,6 +1339,7 @@ struct resource_pool *dce81_create_resource_pool(
 	if (dce81_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
-- 
2.35.1

[PATCH AUTOSEL 5.10 07/39] drm/amd/display: prevent memory leak

[Sasha Levin]

From: gehao <gehao@kylinos.cn>

[ Upstream commit d232afb1f3417ae8194ccf19ad3a8360e70e104e ]

In dce6(0,1,4)_create_resource_pool and dce80_create_resource_pool
the allocated memory should be released if construct pool fails.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: gehao <gehao@kylinos.cn>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c | 3 +++
 drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
index 5a5a9cb77acb..bcdd8a958fc0 100644
--- a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
@@ -1132,6 +1132,7 @@ struct resource_pool *dce60_create_resource_pool(
 	if (dce60_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1329,6 +1330,7 @@ struct resource_pool *dce61_create_resource_pool(
 	if (dce61_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1522,6 +1524,7 @@ struct resource_pool *dce64_create_resource_pool(
 	if (dce64_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
index a19be9de2df7..2eefa07762ae 100644
--- a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
@@ -1141,6 +1141,7 @@ struct resource_pool *dce80_create_resource_pool(
 	if (dce80_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1338,6 +1339,7 @@ struct resource_pool *dce81_create_resource_pool(
 	if (dce81_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
-- 
2.35.1

[PATCH AUTOSEL 5.10 07/39] drm/amd/display: prevent memory leak

[Sasha Levin]

From: gehao <gehao@kylinos.cn>

[ Upstream commit d232afb1f3417ae8194ccf19ad3a8360e70e104e ]

In dce6(0,1,4)_create_resource_pool and dce80_create_resource_pool
the allocated memory should be released if construct pool fails.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: gehao <gehao@kylinos.cn>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c | 3 +++
 drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
index 5a5a9cb77acb..bcdd8a958fc0 100644
--- a/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce60/dce60_resource.c
@@ -1132,6 +1132,7 @@ struct resource_pool *dce60_create_resource_pool(
 	if (dce60_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1329,6 +1330,7 @@ struct resource_pool *dce61_create_resource_pool(
 	if (dce61_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1522,6 +1524,7 @@ struct resource_pool *dce64_create_resource_pool(
 	if (dce64_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
index a19be9de2df7..2eefa07762ae 100644
--- a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c
@@ -1141,6 +1141,7 @@ struct resource_pool *dce80_create_resource_pool(
 	if (dce80_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
@@ -1338,6 +1339,7 @@ struct resource_pool *dce81_create_resource_pool(
 	if (dce81_construct(num_virtual_links, dc, pool))
 		return &pool->base;
 
+	kfree(pool);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
-- 
2.35.1

[PATCH AUTOSEL 5.10 08/39] qed (gcc13): use u16 for fid to be big enough

[Sasha Levin]

From: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>

[ Upstream commit 7d84118229bf7f7290438c85caa8e49de52d50c1 ]

gcc 13 correctly reports overflow in qed_grc_dump_addr_range():
In file included from drivers/net/ethernet/qlogic/qed/qed.h:23,
                 from drivers/net/ethernet/qlogic/qed/qed_debug.c:10:
drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump_addr_range':
include/linux/qed/qed_if.h:1217:9: error: overflow in conversion from 'int' to 'u8' {aka 'unsigned char'} changes value from '(int)vf_id << 8 | 128' to '128' [-Werror=overflow]

We do:
  u8 fid;
  ...
  fid = vf_id << 8 | 128;

Since fid is 16bit (and the stored value above too), fid should be u16,
not u8. Fix that.

Cc: Martin Liska <mliska@suse.cz>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221031114354.10398-1-jirislaby@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_debug.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c
index 6ab3e60d4928..4b4077cf2d26 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_debug.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c
@@ -1796,9 +1796,10 @@ static u32 qed_grc_dump_addr_range(struct qed_hwfn *p_hwfn,
 				   u8 split_id)
 {
 	struct dbg_tools_data *dev_data = &p_hwfn->dbg_info;
-	u8 port_id = 0, pf_id = 0, vf_id = 0, fid = 0;
+	u8 port_id = 0, pf_id = 0, vf_id = 0;
 	bool read_using_dmae = false;
 	u32 thresh;
+	u16 fid;
 
 	if (!dump)
 		return len;
-- 
2.35.1

[PATCH AUTOSEL 5.10 09/39] bpf: make sure skb->len != 0 when redirecting to a tunneling device

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit 07ec7b502800ba9f7b8b15cb01dd6556bb41aaca ]

syzkaller managed to trigger another case where skb->len == 0
when we enter __dev_queue_xmit:

WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline]
WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295

Call Trace:
 dev_queue_xmit+0x17/0x20 net/core/dev.c:4406
 __bpf_tx_skb net/core/filter.c:2115 [inline]
 __bpf_redirect_no_mac net/core/filter.c:2140 [inline]
 __bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163
 ____bpf_clone_redirect net/core/filter.c:2447 [inline]
 bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419
 bpf_prog_48159a89cb4a9a16+0x59/0x5e
 bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline]
 __bpf_prog_run include/linux/filter.h:596 [inline]
 bpf_prog_run include/linux/filter.h:603 [inline]
 bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402
 bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170
 bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648
 __sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005
 __do_sys_bpf kernel/bpf/syscall.c:5091 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:5089 [inline]
 __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089
 do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
 entry_SYSCALL_64_after_hwframe+0x61/0xc6

The reproducer doesn't really reproduce outside of syzkaller
environment, so I'm taking a guess here. It looks like we
do generate correct ETH_HLEN-sized packet, but we redirect
the packet to the tunneling device. Before we do so, we
__skb_pull l2 header and arrive again at skb->len == 0.
Doesn't seem like we can do anything better than having
an explicit check after __skb_pull?

Cc: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+f635e86ec3fa0a37e019@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221027225537.353077-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/core/filter.c b/net/core/filter.c
index 4c22e6d1da74..549c5c0f3dee 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2127,6 +2127,10 @@ static int __bpf_redirect_no_mac(struct sk_buff *skb, struct net_device *dev,
 
 	if (mlen) {
 		__skb_pull(skb, mlen);
+		if (unlikely(!skb->len)) {
+			kfree_skb(skb);
+			return -ERANGE;
+		}
 
 		/* At ingress, the mac header has already been pulled once.
 		 * At egress, skb_pospull_rcsum has to be done in case that
-- 
2.35.1

[PATCH AUTOSEL 5.10 10/39] net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 63fe6ff674a96cfcfc0fa8df1051a27aa31c70b4 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/net/ethernet/ti/netcp_core.c:1944:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = netcp_ndo_start_xmit,
                                    ^~~~~~~~~~~~~~~~~~~~
  1 error generated.

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of
netcp_ndo_start_xmit() to match the prototype's to resolve the warning
and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102160933.1601260-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/netcp_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index dc50e948195d..f145abb77a49 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -1262,7 +1262,7 @@ static int netcp_tx_submit_skb(struct netcp_intf *netcp,
 }
 
 /* Submit the packet */
-static int netcp_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t netcp_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct netcp_intf *netcp = netdev_priv(ndev);
 	struct netcp_stats *tx_stats = &netcp->stats;
-- 
2.35.1

[PATCH AUTOSEL 5.10 11/39] hamradio: baycom_epp: Fix return type of baycom_send_packet()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit c5733e5b15d91ab679646ec3149e192996a27d5d ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/net/hamradio/baycom_epp.c:1119:25: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit      = baycom_send_packet,
                                ^~~~~~~~~~~~~~~~~~
  1 error generated.

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of baycom_send_packet()
to match the prototype's to resolve the warning and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102160610.1186145-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hamradio/baycom_epp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index e4e4981ac1d2..eea9d47157cf 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -758,7 +758,7 @@ static void epp_bh(struct work_struct *work)
  * ===================== network driver interface =========================
  */
 
-static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
 	struct baycom_state *bc = netdev_priv(dev);
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 12/39] wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()

[Sasha Levin]

From: Minsuk Kang <linuxlovemin@yonsei.ac.kr>

[ Upstream commit 81d17f6f3331f03c8eafdacea68ab773426c1e3c ]

This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.

Found by a modified version of syzkaller.

UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack_lvl+0x57/0x7d
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
 ? lock_chain_count+0x20/0x20
 brcmf_fw_alloc_request.cold+0x19/0x3ea
 ? brcmf_fw_get_firmwares+0x250/0x250
 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
 brcmf_usb_get_fwname+0x114/0x1a0
 ? brcmf_usb_reset_resume+0x120/0x120
 ? number+0x6c4/0x9a0
 brcmf_c_process_clm_blob+0x168/0x590
 ? put_dec+0x90/0x90
 ? enable_ptr_key_workfn+0x20/0x20
 ? brcmf_common_pd_remove+0x50/0x50
 ? rcu_read_lock_sched_held+0xa1/0xd0
 brcmf_c_preinit_dcmds+0x673/0xc40
 ? brcmf_c_set_joinpref_default+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lock_acquire+0x19d/0x4e0
 ? find_held_lock+0x2d/0x110
 ? brcmf_usb_deq+0x1cc/0x260
 ? mark_held_locks+0x9f/0xe0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? _raw_spin_unlock_irqrestore+0x47/0x50
 ? trace_hardirqs_on+0x1c/0x120
 ? brcmf_usb_deq+0x1a7/0x260
 ? brcmf_usb_rx_fill_all+0x5a/0xf0
 brcmf_attach+0x246/0xd40
 ? wiphy_new_nm+0x1476/0x1d50
 ? kmemdup+0x30/0x40
 brcmf_usb_probe+0x12de/0x1690
 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 ? usb_match_id.part.0+0x88/0xc0
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __mutex_unlock_slowpath+0xe7/0x660
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_set_configuration+0x984/0x1770
 ? kernfs_create_link+0x175/0x230
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_new_device.cold+0x463/0xf66
 ? hub_disconnect+0x400/0x400
 ? _raw_spin_unlock_irq+0x24/0x30
 hub_event+0x10d5/0x3330
 ? hub_port_debounce+0x280/0x280
 ? __lock_acquire+0x1671/0x5790
 ? wq_calc_node_cpumask+0x170/0x2a0
 ? lock_release+0x640/0x640
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x873/0x13e0
 ? lock_release+0x640/0x640
 ? pwq_dec_nr_in_flight+0x320/0x320
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x8b/0xd10
 ? __kthread_parkme+0xd9/0x1d0
 ? process_one_work+0x13e0/0x13e0
 kthread+0x379/0x450
 ? _raw_spin_unlock_irq+0x24/0x30
 ? set_kthread_struct+0x100/0x100
 ret_from_fork+0x1f/0x30

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index a2b8d9171af2..060889bf6d05 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -703,6 +703,11 @@ brcmf_fw_alloc_request(u32 chip, u32 chiprev,
 	u32 i, j;
 	char end = '\0';
 
+	if (chiprev >= BITS_PER_TYPE(u32)) {
+		brcmf_err("Invalid chip revision %u\n", chiprev);
+		return NULL;
+	}
+
 	for (i = 0; i < table_size; i++) {
 		if (mapping_table[i].chipid == chip &&
 		    mapping_table[i].revmask & BIT(chiprev))
-- 
2.35.1

[Intel-wired-lan] [PATCH AUTOSEL 5.10 13/39] igb: Do not free q_vector unless new one was allocated

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 0668716506ca66f90d395f36ccdaebc3e0e84801 ]

Avoid potential use-after-free condition under memory pressure. If the
kzalloc() fails, q_vector will be freed but left in the original
adapter->q_vector[v_idx] array position.

Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 327196d15a6a..eed8274f5f79 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1204,8 +1204,12 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
 	if (!q_vector) {
 		q_vector = kzalloc(size, GFP_KERNEL);
 	} else if (size > ksize(q_vector)) {
-		kfree_rcu(q_vector, rcu);
-		q_vector = kzalloc(size, GFP_KERNEL);
+		struct igb_q_vector *new_q_vector;
+
+		new_q_vector = kzalloc(size, GFP_KERNEL);
+		if (new_q_vector)
+			kfree_rcu(q_vector, rcu);
+		q_vector = new_q_vector;
 	} else {
 		memset(q_vector, 0, size);
 	}
-- 
2.35.1

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan

[PATCH AUTOSEL 5.10 13/39] igb: Do not free q_vector unless new one was allocated

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 0668716506ca66f90d395f36ccdaebc3e0e84801 ]

Avoid potential use-after-free condition under memory pressure. If the
kzalloc() fails, q_vector will be freed but left in the original
adapter->q_vector[v_idx] array position.

Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 327196d15a6a..eed8274f5f79 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1204,8 +1204,12 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
 	if (!q_vector) {
 		q_vector = kzalloc(size, GFP_KERNEL);
 	} else if (size > ksize(q_vector)) {
-		kfree_rcu(q_vector, rcu);
-		q_vector = kzalloc(size, GFP_KERNEL);
+		struct igb_q_vector *new_q_vector;
+
+		new_q_vector = kzalloc(size, GFP_KERNEL);
+		if (new_q_vector)
+			kfree_rcu(q_vector, rcu);
+		q_vector = new_q_vector;
 	} else {
 		memset(q_vector, 0, size);
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.10 14/39] drm/amdgpu: Fix type of second parameter in trans_msg() callback

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit f0d0f1087333714ee683cc134a95afe331d7ddd9 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c:412:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .trans_msg = xgpu_ai_mailbox_trans_msg,
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

  drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c:435:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .trans_msg = xgpu_nv_mailbox_trans_msg,
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

The type of the second parameter in the prototype should be 'enum
idh_request' instead of 'u32'. Update it to clear up the warnings.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
index aea49bad914f..fbd92fff8b06 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
@@ -62,6 +62,8 @@ struct amdgpu_vf_error_buffer {
 	uint64_t data[AMDGPU_VF_ERROR_ENTRY_SIZE];
 };
 
+enum idh_request;
+
 /**
  * struct amdgpu_virt_ops - amdgpu device virt operations
  */
@@ -71,7 +73,8 @@ struct amdgpu_virt_ops {
 	int (*req_init_data)(struct amdgpu_device *adev);
 	int (*reset_gpu)(struct amdgpu_device *adev);
 	int (*wait_reset)(struct amdgpu_device *adev);
-	void (*trans_msg)(struct amdgpu_device *adev, u32 req, u32 data1, u32 data2, u32 data3);
+	void (*trans_msg)(struct amdgpu_device *adev, enum idh_request req,
+			  u32 data1, u32 data2, u32 data3);
 };
 
 /*
-- 
2.35.1

[PATCH AUTOSEL 5.10 14/39] drm/amdgpu: Fix type of second parameter in trans_msg() callback

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit f0d0f1087333714ee683cc134a95afe331d7ddd9 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c:412:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .trans_msg = xgpu_ai_mailbox_trans_msg,
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

  drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c:435:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .trans_msg = xgpu_nv_mailbox_trans_msg,
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

The type of the second parameter in the prototype should be 'enum
idh_request' instead of 'u32'. Update it to clear up the warnings.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
index aea49bad914f..fbd92fff8b06 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
@@ -62,6 +62,8 @@ struct amdgpu_vf_error_buffer {
 	uint64_t data[AMDGPU_VF_ERROR_ENTRY_SIZE];
 };
 
+enum idh_request;
+
 /**
  * struct amdgpu_virt_ops - amdgpu device virt operations
  */
@@ -71,7 +73,8 @@ struct amdgpu_virt_ops {
 	int (*req_init_data)(struct amdgpu_device *adev);
 	int (*reset_gpu)(struct amdgpu_device *adev);
 	int (*wait_reset)(struct amdgpu_device *adev);
-	void (*trans_msg)(struct amdgpu_device *adev, u32 req, u32 data1, u32 data2, u32 data3);
+	void (*trans_msg)(struct amdgpu_device *adev, enum idh_request req,
+			  u32 data1, u32 data2, u32 data3);
 };
 
 /*
-- 
2.35.1

[PATCH AUTOSEL 5.10 14/39] drm/amdgpu: Fix type of second parameter in trans_msg() callback

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit f0d0f1087333714ee683cc134a95afe331d7ddd9 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c:412:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .trans_msg = xgpu_ai_mailbox_trans_msg,
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

  drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c:435:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .trans_msg = xgpu_nv_mailbox_trans_msg,
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

The type of the second parameter in the prototype should be 'enum
idh_request' instead of 'u32'. Update it to clear up the warnings.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
index aea49bad914f..fbd92fff8b06 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
@@ -62,6 +62,8 @@ struct amdgpu_vf_error_buffer {
 	uint64_t data[AMDGPU_VF_ERROR_ENTRY_SIZE];
 };
 
+enum idh_request;
+
 /**
  * struct amdgpu_virt_ops - amdgpu device virt operations
  */
@@ -71,7 +73,8 @@ struct amdgpu_virt_ops {
 	int (*req_init_data)(struct amdgpu_device *adev);
 	int (*reset_gpu)(struct amdgpu_device *adev);
 	int (*wait_reset)(struct amdgpu_device *adev);
-	void (*trans_msg)(struct amdgpu_device *adev, u32 req, u32 data1, u32 data2, u32 data3);
+	void (*trans_msg)(struct amdgpu_device *adev, enum idh_request req,
+			  u32 data1, u32 data2, u32 data3);
 };
 
 /*
-- 
2.35.1

[PATCH AUTOSEL 5.10 15/39] drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit e4d0ef752081e7aa6ffb7ccac11c499c732a2e05 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .odn_edit_dpm_table      = smu_od_edit_dpm_table,
                                     ^~~~~~~~~~~~~~~~~~~~~
  1 error generated.

There are only two implementations of ->odn_edit_dpm_table() in 'struct
amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One
has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the
other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls
->od_edit_dpm_table() from 'struct pptable_funcs' and
pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct
pp_hwmgr_func', which both have a second parameter type of 'enum
PP_OD_DPM_TABLE_COMMAND'.

Update the type parameter in both the prototype in 'struct amd_pm_funcs'
and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which
cleans up the warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/include/kgd_pp_interface.h   | 3 ++-
 drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
index 94132c70d7af..5e8876ad1a1b 100644
--- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h
+++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
@@ -282,7 +282,8 @@ struct amd_pm_funcs {
 	int (*get_power_profile_mode)(void *handle, char *buf);
 	int (*set_power_profile_mode)(void *handle, long *input, uint32_t size);
 	int (*set_fine_grain_clk_vol)(void *handle, uint32_t type, long *input, uint32_t size);
-	int (*odn_edit_dpm_table)(void *handle, uint32_t type, long *input, uint32_t size);
+	int (*odn_edit_dpm_table)(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+				  long *input, uint32_t size);
 	int (*set_mp1_state)(void *handle, enum pp_mp1_state mp1_state);
 	int (*smu_i2c_bus_access)(void *handle, bool acquire);
 /* export to DC */
diff --git a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
index eab9768029c1..a98ea29b2fd5 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
@@ -924,7 +924,8 @@ static int pp_set_fine_grain_clk_vol(void *handle, uint32_t type, long *input, u
 	return hwmgr->hwmgr_func->set_fine_grain_clk_vol(hwmgr, type, input, size);
 }
 
-static int pp_odn_edit_dpm_table(void *handle, uint32_t type, long *input, uint32_t size)
+static int pp_odn_edit_dpm_table(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+				 long *input, uint32_t size)
 {
 	struct pp_hwmgr *hwmgr = handle;
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 15/39] drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit e4d0ef752081e7aa6ffb7ccac11c499c732a2e05 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .odn_edit_dpm_table      = smu_od_edit_dpm_table,
                                     ^~~~~~~~~~~~~~~~~~~~~
  1 error generated.

There are only two implementations of ->odn_edit_dpm_table() in 'struct
amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One
has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the
other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls
->od_edit_dpm_table() from 'struct pptable_funcs' and
pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct
pp_hwmgr_func', which both have a second parameter type of 'enum
PP_OD_DPM_TABLE_COMMAND'.

Update the type parameter in both the prototype in 'struct amd_pm_funcs'
and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which
cleans up the warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/include/kgd_pp_interface.h   | 3 ++-
 drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
index 94132c70d7af..5e8876ad1a1b 100644
--- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h
+++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
@@ -282,7 +282,8 @@ struct amd_pm_funcs {
 	int (*get_power_profile_mode)(void *handle, char *buf);
 	int (*set_power_profile_mode)(void *handle, long *input, uint32_t size);
 	int (*set_fine_grain_clk_vol)(void *handle, uint32_t type, long *input, uint32_t size);
-	int (*odn_edit_dpm_table)(void *handle, uint32_t type, long *input, uint32_t size);
+	int (*odn_edit_dpm_table)(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+				  long *input, uint32_t size);
 	int (*set_mp1_state)(void *handle, enum pp_mp1_state mp1_state);
 	int (*smu_i2c_bus_access)(void *handle, bool acquire);
 /* export to DC */
diff --git a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
index eab9768029c1..a98ea29b2fd5 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
@@ -924,7 +924,8 @@ static int pp_set_fine_grain_clk_vol(void *handle, uint32_t type, long *input, u
 	return hwmgr->hwmgr_func->set_fine_grain_clk_vol(hwmgr, type, input, size);
 }
 
-static int pp_odn_edit_dpm_table(void *handle, uint32_t type, long *input, uint32_t size)
+static int pp_odn_edit_dpm_table(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+				 long *input, uint32_t size)
 {
 	struct pp_hwmgr *hwmgr = handle;
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 15/39] drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit e4d0ef752081e7aa6ffb7ccac11c499c732a2e05 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .odn_edit_dpm_table      = smu_od_edit_dpm_table,
                                     ^~~~~~~~~~~~~~~~~~~~~
  1 error generated.

There are only two implementations of ->odn_edit_dpm_table() in 'struct
amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One
has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the
other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls
->od_edit_dpm_table() from 'struct pptable_funcs' and
pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct
pp_hwmgr_func', which both have a second parameter type of 'enum
PP_OD_DPM_TABLE_COMMAND'.

Update the type parameter in both the prototype in 'struct amd_pm_funcs'
and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which
cleans up the warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/include/kgd_pp_interface.h   | 3 ++-
 drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
index 94132c70d7af..5e8876ad1a1b 100644
--- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h
+++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h
@@ -282,7 +282,8 @@ struct amd_pm_funcs {
 	int (*get_power_profile_mode)(void *handle, char *buf);
 	int (*set_power_profile_mode)(void *handle, long *input, uint32_t size);
 	int (*set_fine_grain_clk_vol)(void *handle, uint32_t type, long *input, uint32_t size);
-	int (*odn_edit_dpm_table)(void *handle, uint32_t type, long *input, uint32_t size);
+	int (*odn_edit_dpm_table)(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+				  long *input, uint32_t size);
 	int (*set_mp1_state)(void *handle, enum pp_mp1_state mp1_state);
 	int (*smu_i2c_bus_access)(void *handle, bool acquire);
 /* export to DC */
diff --git a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
index eab9768029c1..a98ea29b2fd5 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c
@@ -924,7 +924,8 @@ static int pp_set_fine_grain_clk_vol(void *handle, uint32_t type, long *input, u
 	return hwmgr->hwmgr_func->set_fine_grain_clk_vol(hwmgr, type, input, size);
 }
 
-static int pp_odn_edit_dpm_table(void *handle, uint32_t type, long *input, uint32_t size)
+static int pp_odn_edit_dpm_table(void *handle, enum PP_OD_DPM_TABLE_COMMAND type,
+				 long *input, uint32_t size)
 {
 	struct pp_hwmgr *hwmgr = handle;
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 16/39] s390/ctcm: Fix return type of ctc{mp,}m_tx()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit aa5bf80c3c067b82b4362cd6e8e2194623bcaca6 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/s390/net/ctcm_main.c:1064:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = ctcm_tx,
                                    ^~~~~~~
  drivers/s390/net/ctcm_main.c:1072:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = ctcmpc_tx,
                                    ^~~~~~~~~

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of ctc{mp,}m_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.

Additionally, while in the area, remove a comment block that is no
longer relevant.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/ctcm_main.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index d06809eac16d..fb0e8f1cabdc 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -865,16 +865,9 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 /**
  * Start transmission of a packet.
  * Called from generic network device layer.
- *
- *  skb		Pointer to buffer containing the packet.
- *  dev		Pointer to interface struct.
- *
- * returns 0 if packet consumed, !0 if packet rejected.
- *         Note: If we return !0, then the packet is free'd by
- *               the generic network layer.
  */
 /* first merge version - leaving both functions separated */
-static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ctcm_priv *priv = dev->ml_priv;
 
@@ -917,7 +910,7 @@ static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 }
 
 /* unmerged MPC variant of ctcm_tx */
-static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	int len = 0;
 	struct ctcm_priv *priv = dev->ml_priv;
-- 
2.35.1

[PATCH AUTOSEL 5.10 17/39] s390/netiucv: Fix return type of netiucv_tx()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 88d86d18d7cf7e9137c95f9d212bb9fff8a1b4be ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = netiucv_tx,
                                    ^~~~~~~~~~

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.

Additionally, while in the area, remove a comment block that is no
longer relevant.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/netiucv.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 260860cf3aa1..a2f403c4ec38 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1260,15 +1260,8 @@ static int netiucv_close(struct net_device *dev)
 /**
  * Start transmission of a packet.
  * Called from generic network device layer.
- *
- * @param skb Pointer to buffer containing the packet.
- * @param dev Pointer to interface struct.
- *
- * @return 0 if packet consumed, !0 if packet rejected.
- *         Note: If we return !0, then the packet is free'd by
- *               the generic network layer.
  */
-static int netiucv_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t netiucv_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	struct netiucv_priv *privptr = netdev_priv(dev);
 	int rc;
-- 
2.35.1

[PATCH AUTOSEL 5.10 18/39] s390/lcs: Fix return type of lcs_start_xmit()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit bb16db8393658e0978c3f0d30ae069e878264fa3 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = lcs_start_xmit,
                                    ^~~~~~~~~~~~~~
  drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = lcs_start_xmit,
                                    ^~~~~~~~~~~~~~

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/lcs.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 06a322bdced6..7e743f4717a9 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1518,9 +1518,8 @@ lcs_txbuffer_cb(struct lcs_channel *channel, struct lcs_buffer *buffer)
 /**
  * Packet transmit function called by network stack
  */
-static int
-__lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
-		 struct net_device *dev)
+static netdev_tx_t __lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
+				    struct net_device *dev)
 {
 	struct lcs_header *header;
 	int rc = NETDEV_TX_OK;
@@ -1581,8 +1580,7 @@ __lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
 	return rc;
 }
 
-static int
-lcs_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lcs_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct lcs_card *card;
 	int rc;
-- 
2.35.1

[PATCH AUTOSEL 5.10 19/39] drm/msm: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit b2a1c5ca50db22b3677676dd5bad5f6092429acf ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-5-ville.syrjala@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 5a152d505dfb..1c3dcbc6cce8 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -848,7 +848,7 @@ static int dp_display_set_mode(struct msm_dp *dp_display,
 
 	dp = container_of(dp_display, struct dp_display_private, dp_display);
 
-	dp->panel->dp_mode.drm_mode = mode->drm_mode;
+	drm_mode_copy(&dp->panel->dp_mode.drm_mode, &mode->drm_mode);
 	dp->panel->dp_mode.bpp = mode->bpp;
 	dp->panel->dp_mode.capabilities = mode->capabilities;
 	dp_panel_init_panel_info(dp->panel);
-- 
2.35.1

[PATCH AUTOSEL 5.10 19/39] drm/msm: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit b2a1c5ca50db22b3677676dd5bad5f6092429acf ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-5-ville.syrjala@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 5a152d505dfb..1c3dcbc6cce8 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -848,7 +848,7 @@ static int dp_display_set_mode(struct msm_dp *dp_display,
 
 	dp = container_of(dp_display, struct dp_display_private, dp_display);
 
-	dp->panel->dp_mode.drm_mode = mode->drm_mode;
+	drm_mode_copy(&dp->panel->dp_mode.drm_mode, &mode->drm_mode);
 	dp->panel->dp_mode.bpp = mode->bpp;
 	dp->panel->dp_mode.capabilities = mode->capabilities;
 	dp_panel_init_panel_info(dp->panel);
-- 
2.35.1

[PATCH AUTOSEL 5.10 20/39] drm/rockchip: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 2bfaa28000d2830d3209161a4541cce0660e1b84 ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
 drivers/gpu/drm/rockchip/inno_hdmi.c   | 2 +-
 drivers/gpu/drm/rockchip/rk3066_hdmi.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 857c47c69ef1..adeaa0140f0f 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -564,7 +564,7 @@ static void cdn_dp_encoder_mode_set(struct drm_encoder *encoder,
 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
 
-	memcpy(&dp->mode, adjusted, sizeof(*mode));
+	drm_mode_copy(&dp->mode, adjusted);
 }
 
 static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 7afdc54eb3ec..78120da5e63a 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -488,7 +488,7 @@ static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	inno_hdmi_setup(hdmi, adj_mode);
 
 	/* Store the display mode for plugin/DPMS poweron events */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index 1c546c3a8998..17e7c40a9e7b 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -383,7 +383,7 @@ rk3066_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
 
 	/* Store the display mode for plugin/DPMS poweron events. */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
-- 
2.35.1

[PATCH AUTOSEL 5.10 20/39] drm/rockchip: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 2bfaa28000d2830d3209161a4541cce0660e1b84 ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
 drivers/gpu/drm/rockchip/inno_hdmi.c   | 2 +-
 drivers/gpu/drm/rockchip/rk3066_hdmi.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 857c47c69ef1..adeaa0140f0f 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -564,7 +564,7 @@ static void cdn_dp_encoder_mode_set(struct drm_encoder *encoder,
 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
 
-	memcpy(&dp->mode, adjusted, sizeof(*mode));
+	drm_mode_copy(&dp->mode, adjusted);
 }
 
 static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 7afdc54eb3ec..78120da5e63a 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -488,7 +488,7 @@ static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	inno_hdmi_setup(hdmi, adj_mode);
 
 	/* Store the display mode for plugin/DPMS poweron events */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index 1c546c3a8998..17e7c40a9e7b 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -383,7 +383,7 @@ rk3066_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
 
 	/* Store the display mode for plugin/DPMS poweron events. */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
-- 
2.35.1

[PATCH AUTOSEL 5.10 20/39] drm/rockchip: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 2bfaa28000d2830d3209161a4541cce0660e1b84 ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
 drivers/gpu/drm/rockchip/inno_hdmi.c   | 2 +-
 drivers/gpu/drm/rockchip/rk3066_hdmi.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 857c47c69ef1..adeaa0140f0f 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -564,7 +564,7 @@ static void cdn_dp_encoder_mode_set(struct drm_encoder *encoder,
 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
 
-	memcpy(&dp->mode, adjusted, sizeof(*mode));
+	drm_mode_copy(&dp->mode, adjusted);
 }
 
 static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 7afdc54eb3ec..78120da5e63a 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -488,7 +488,7 @@ static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	inno_hdmi_setup(hdmi, adj_mode);
 
 	/* Store the display mode for plugin/DPMS poweron events */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index 1c546c3a8998..17e7c40a9e7b 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -383,7 +383,7 @@ rk3066_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
 
 	/* Store the display mode for plugin/DPMS poweron events. */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
-- 
2.35.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.10 20/39] drm/rockchip: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 2bfaa28000d2830d3209161a4541cce0660e1b84 ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 2 +-
 drivers/gpu/drm/rockchip/inno_hdmi.c   | 2 +-
 drivers/gpu/drm/rockchip/rk3066_hdmi.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 857c47c69ef1..adeaa0140f0f 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -564,7 +564,7 @@ static void cdn_dp_encoder_mode_set(struct drm_encoder *encoder,
 	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
 	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
 
-	memcpy(&dp->mode, adjusted, sizeof(*mode));
+	drm_mode_copy(&dp->mode, adjusted);
 }
 
 static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 7afdc54eb3ec..78120da5e63a 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -488,7 +488,7 @@ static void inno_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	inno_hdmi_setup(hdmi, adj_mode);
 
 	/* Store the display mode for plugin/DPMS poweron events */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void inno_hdmi_encoder_enable(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index 1c546c3a8998..17e7c40a9e7b 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -383,7 +383,7 @@ rk3066_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
 
 	/* Store the display mode for plugin/DPMS poweron events. */
-	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+	drm_mode_copy(&hdmi->previous_mode, adj_mode);
 }
 
 static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 21/39] drm/sti: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 442cf8e22ba25a77cb9092d78733fdbac9844e50 ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sti/sti_dvo.c  | 2 +-
 drivers/gpu/drm/sti/sti_hda.c  | 2 +-
 drivers/gpu/drm/sti/sti_hdmi.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sti/sti_dvo.c b/drivers/gpu/drm/sti/sti_dvo.c
index ddb4184f0726..b0676a73a1d7 100644
--- a/drivers/gpu/drm/sti/sti_dvo.c
+++ b/drivers/gpu/drm/sti/sti_dvo.c
@@ -288,7 +288,7 @@ static void sti_dvo_set_mode(struct drm_bridge *bridge,
 
 	DRM_DEBUG_DRIVER("\n");
 
-	memcpy(&dvo->mode, mode, sizeof(struct drm_display_mode));
+	drm_mode_copy(&dvo->mode, mode);
 
 	/* According to the path used (main or aux), the dvo clocks should
 	 * have a different parent clock. */
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
index 5c2b650b561d..84109800143a 100644
--- a/drivers/gpu/drm/sti/sti_hda.c
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -523,7 +523,7 @@ static void sti_hda_set_mode(struct drm_bridge *bridge,
 
 	DRM_DEBUG_DRIVER("\n");
 
-	memcpy(&hda->mode, mode, sizeof(struct drm_display_mode));
+	drm_mode_copy(&hda->mode, mode);
 
 	if (!hda_get_mode_idx(hda->mode, &mode_idx)) {
 		DRM_ERROR("Undefined mode\n");
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index 38a558768e53..412664dfb0b0 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -934,7 +934,7 @@ static void sti_hdmi_set_mode(struct drm_bridge *bridge,
 	DRM_DEBUG_DRIVER("\n");
 
 	/* Copy the drm display mode in the connector local structure */
-	memcpy(&hdmi->mode, mode, sizeof(struct drm_display_mode));
+	drm_mode_copy(&hdmi->mode, mode);
 
 	/* Update clock framerate according to the selected mode */
 	ret = clk_set_rate(hdmi->clk_pix, mode->clock * 1000);
-- 
2.35.1

[PATCH AUTOSEL 5.10 21/39] drm/sti: Use drm_mode_copy()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 442cf8e22ba25a77cb9092d78733fdbac9844e50 ]

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sti/sti_dvo.c  | 2 +-
 drivers/gpu/drm/sti/sti_hda.c  | 2 +-
 drivers/gpu/drm/sti/sti_hdmi.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sti/sti_dvo.c b/drivers/gpu/drm/sti/sti_dvo.c
index ddb4184f0726..b0676a73a1d7 100644
--- a/drivers/gpu/drm/sti/sti_dvo.c
+++ b/drivers/gpu/drm/sti/sti_dvo.c
@@ -288,7 +288,7 @@ static void sti_dvo_set_mode(struct drm_bridge *bridge,
 
 	DRM_DEBUG_DRIVER("\n");
 
-	memcpy(&dvo->mode, mode, sizeof(struct drm_display_mode));
+	drm_mode_copy(&dvo->mode, mode);
 
 	/* According to the path used (main or aux), the dvo clocks should
 	 * have a different parent clock. */
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
index 5c2b650b561d..84109800143a 100644
--- a/drivers/gpu/drm/sti/sti_hda.c
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -523,7 +523,7 @@ static void sti_hda_set_mode(struct drm_bridge *bridge,
 
 	DRM_DEBUG_DRIVER("\n");
 
-	memcpy(&hda->mode, mode, sizeof(struct drm_display_mode));
+	drm_mode_copy(&hda->mode, mode);
 
 	if (!hda_get_mode_idx(hda->mode, &mode_idx)) {
 		DRM_ERROR("Undefined mode\n");
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index 38a558768e53..412664dfb0b0 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -934,7 +934,7 @@ static void sti_hdmi_set_mode(struct drm_bridge *bridge,
 	DRM_DEBUG_DRIVER("\n");
 
 	/* Copy the drm display mode in the connector local structure */
-	memcpy(&hdmi->mode, mode, sizeof(struct drm_display_mode));
+	drm_mode_copy(&hdmi->mode, mode);
 
 	/* Update clock framerate according to the selected mode */
 	ret = clk_set_rate(hdmi->clk_pix, mode->clock * 1000);
-- 
2.35.1

[PATCH AUTOSEL 5.10 22/39] drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()

[Sasha Levin]

From: Li Zhong <floridsleeves@gmail.com>

[ Upstream commit 3bd548e5b819b8c0f2c9085de775c5c7bff9052f ]

Check the return value of md_bitmap_get_counter() in case it returns
NULL pointer, which will result in a null pointer dereference.

v2: update the check to include other dereference

Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md-bitmap.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c
index d377ea060925..4e52fcf98d59 100644
--- a/drivers/md/md-bitmap.c
+++ b/drivers/md/md-bitmap.c
@@ -2196,20 +2196,23 @@ int md_bitmap_resize(struct bitmap *bitmap, sector_t blocks,
 
 		if (set) {
 			bmc_new = md_bitmap_get_counter(&bitmap->counts, block, &new_blocks, 1);
-			if (*bmc_new == 0) {
-				/* need to set on-disk bits too. */
-				sector_t end = block + new_blocks;
-				sector_t start = block >> chunkshift;
-				start <<= chunkshift;
-				while (start < end) {
-					md_bitmap_file_set_bit(bitmap, block);
-					start += 1 << chunkshift;
+			if (bmc_new) {
+				if (*bmc_new == 0) {
+					/* need to set on-disk bits too. */
+					sector_t end = block + new_blocks;
+					sector_t start = block >> chunkshift;
+
+					start <<= chunkshift;
+					while (start < end) {
+						md_bitmap_file_set_bit(bitmap, block);
+						start += 1 << chunkshift;
+					}
+					*bmc_new = 2;
+					md_bitmap_count_page(&bitmap->counts, block, 1);
+					md_bitmap_set_pending(&bitmap->counts, block);
 				}
-				*bmc_new = 2;
-				md_bitmap_count_page(&bitmap->counts, block, 1);
-				md_bitmap_set_pending(&bitmap->counts, block);
+				*bmc_new |= NEEDED_MASK;
 			}
-			*bmc_new |= NEEDED_MASK;
 			if (new_blocks < old_blocks)
 				old_blocks = new_blocks;
 		}
-- 
2.35.1

[PATCH AUTOSEL 5.10 23/39] md/raid1: stop mdx_raid1 thread when raid1 array run failed

[Sasha Levin]

From: Jiang Li <jiang.li@ugreen.com>

[ Upstream commit b611ad14006e5be2170d9e8e611bf49dff288911 ]

fail run raid1 array when we assemble array with the inactive disk only,
but the mdx_raid1 thread were not stop, Even if the associated resources
have been released. it will caused a NULL dereference when we do poweroff.

This causes the following Oops:
    [  287.587787] BUG: kernel NULL pointer dereference, address: 0000000000000070
    [  287.594762] #PF: supervisor read access in kernel mode
    [  287.599912] #PF: error_code(0x0000) - not-present page
    [  287.605061] PGD 0 P4D 0
    [  287.607612] Oops: 0000 [#1] SMP NOPTI
    [  287.611287] CPU: 3 PID: 5265 Comm: md0_raid1 Tainted: G     U            5.10.146 #0
    [  287.619029] Hardware name: xxxxxxx/To be filled by O.E.M, BIOS 5.19 06/16/2022
    [  287.626775] RIP: 0010:md_check_recovery+0x57/0x500 [md_mod]
    [  287.632357] Code: fe 01 00 00 48 83 bb 10 03 00 00 00 74 08 48 89 ......
    [  287.651118] RSP: 0018:ffffc90000433d78 EFLAGS: 00010202
    [  287.656347] RAX: 0000000000000000 RBX: ffff888105986800 RCX: 0000000000000000
    [  287.663491] RDX: ffffc90000433bb0 RSI: 00000000ffffefff RDI: ffff888105986800
    [  287.670634] RBP: ffffc90000433da0 R08: 0000000000000000 R09: c0000000ffffefff
    [  287.677771] R10: 0000000000000001 R11: ffffc90000433ba8 R12: ffff888105986800
    [  287.684907] R13: 0000000000000000 R14: fffffffffffffe00 R15: ffff888100b6b500
    [  287.692052] FS:  0000000000000000(0000) GS:ffff888277f80000(0000) knlGS:0000000000000000
    [  287.700149] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [  287.705897] CR2: 0000000000000070 CR3: 000000000320a000 CR4: 0000000000350ee0
    [  287.713033] Call Trace:
    [  287.715498]  raid1d+0x6c/0xbbb [raid1]
    [  287.719256]  ? __schedule+0x1ff/0x760
    [  287.722930]  ? schedule+0x3b/0xb0
    [  287.726260]  ? schedule_timeout+0x1ed/0x290
    [  287.730456]  ? __switch_to+0x11f/0x400
    [  287.734219]  md_thread+0xe9/0x140 [md_mod]
    [  287.738328]  ? md_thread+0xe9/0x140 [md_mod]
    [  287.742601]  ? wait_woken+0x80/0x80
    [  287.746097]  ? md_register_thread+0xe0/0xe0 [md_mod]
    [  287.751064]  kthread+0x11a/0x140
    [  287.754300]  ? kthread_park+0x90/0x90
    [  287.757974]  ret_from_fork+0x1f/0x30

In fact, when raid1 array run fail, we need to do
md_unregister_thread() before raid1_free().

Signed-off-by: Jiang Li <jiang.li@ugreen.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index fb31e5dd54a6..6b5cc3f59fb3 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -3115,6 +3115,7 @@ static int raid1_run(struct mddev *mddev)
 	 * RAID1 needs at least one disk in active
 	 */
 	if (conf->raid_disks - mddev->degraded < 1) {
+		md_unregister_thread(&conf->thread);
 		ret = -EINVAL;
 		goto abort;
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.10 24/39] drm/amd/display: fix array index out of bound error in bios parser

[Sasha Levin]

From: Aurabindo Pillai <aurabindo.pillai@amd.com>

[ Upstream commit 4fc1ba4aa589ca267468ad23fedef37562227d32 ]

[Why&How]
Firmware headers dictate that gpio_pin array only has a size of 8. The
count returned from vbios however is greater than 8.

Fix this by not using array indexing but incrementing the pointer since
gpio_pin definition in atomfirmware.h is hardcoded to size 8

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/bios/bios_parser2.c   | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index 29d64e7e304f..930d2b7d3448 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -352,6 +352,7 @@ static enum bp_result get_gpio_i2c_info(
 	uint32_t count = 0;
 	unsigned int table_index = 0;
 	bool find_valid = false;
+	struct atom_gpio_pin_assignment *pin;
 
 	if (!info)
 		return BP_RESULT_BADINPUT;
@@ -379,20 +380,17 @@ static enum bp_result get_gpio_i2c_info(
 			- sizeof(struct atom_common_table_header))
 				/ sizeof(struct atom_gpio_pin_assignment);
 
+	pin = (struct atom_gpio_pin_assignment *) header->gpio_pin;
+
 	for (table_index = 0; table_index < count; table_index++) {
-		if (((record->i2c_id & I2C_HW_CAP) == (
-		header->gpio_pin[table_index].gpio_id &
-						I2C_HW_CAP)) &&
-		((record->i2c_id & I2C_HW_ENGINE_ID_MASK)  ==
-		(header->gpio_pin[table_index].gpio_id &
-					I2C_HW_ENGINE_ID_MASK)) &&
-		((record->i2c_id & I2C_HW_LANE_MUX) ==
-		(header->gpio_pin[table_index].gpio_id &
-						I2C_HW_LANE_MUX))) {
+		if (((record->i2c_id & I2C_HW_CAP) 				== (pin->gpio_id & I2C_HW_CAP)) &&
+		    ((record->i2c_id & I2C_HW_ENGINE_ID_MASK)	== (pin->gpio_id & I2C_HW_ENGINE_ID_MASK)) &&
+		    ((record->i2c_id & I2C_HW_LANE_MUX) 		== (pin->gpio_id & I2C_HW_LANE_MUX))) {
 			/* still valid */
 			find_valid = true;
 			break;
 		}
+		pin = (struct atom_gpio_pin_assignment *)((uint8_t *)pin + sizeof(struct atom_gpio_pin_assignment));
 	}
 
 	/* If we don't find the entry that we are looking for then
-- 
2.35.1

[PATCH AUTOSEL 5.10 24/39] drm/amd/display: fix array index out of bound error in bios parser

[Sasha Levin]

From: Aurabindo Pillai <aurabindo.pillai@amd.com>

[ Upstream commit 4fc1ba4aa589ca267468ad23fedef37562227d32 ]

[Why&How]
Firmware headers dictate that gpio_pin array only has a size of 8. The
count returned from vbios however is greater than 8.

Fix this by not using array indexing but incrementing the pointer since
gpio_pin definition in atomfirmware.h is hardcoded to size 8

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/bios/bios_parser2.c   | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index 29d64e7e304f..930d2b7d3448 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -352,6 +352,7 @@ static enum bp_result get_gpio_i2c_info(
 	uint32_t count = 0;
 	unsigned int table_index = 0;
 	bool find_valid = false;
+	struct atom_gpio_pin_assignment *pin;
 
 	if (!info)
 		return BP_RESULT_BADINPUT;
@@ -379,20 +380,17 @@ static enum bp_result get_gpio_i2c_info(
 			- sizeof(struct atom_common_table_header))
 				/ sizeof(struct atom_gpio_pin_assignment);
 
+	pin = (struct atom_gpio_pin_assignment *) header->gpio_pin;
+
 	for (table_index = 0; table_index < count; table_index++) {
-		if (((record->i2c_id & I2C_HW_CAP) == (
-		header->gpio_pin[table_index].gpio_id &
-						I2C_HW_CAP)) &&
-		((record->i2c_id & I2C_HW_ENGINE_ID_MASK)  ==
-		(header->gpio_pin[table_index].gpio_id &
-					I2C_HW_ENGINE_ID_MASK)) &&
-		((record->i2c_id & I2C_HW_LANE_MUX) ==
-		(header->gpio_pin[table_index].gpio_id &
-						I2C_HW_LANE_MUX))) {
+		if (((record->i2c_id & I2C_HW_CAP) 				== (pin->gpio_id & I2C_HW_CAP)) &&
+		    ((record->i2c_id & I2C_HW_ENGINE_ID_MASK)	== (pin->gpio_id & I2C_HW_ENGINE_ID_MASK)) &&
+		    ((record->i2c_id & I2C_HW_LANE_MUX) 		== (pin->gpio_id & I2C_HW_LANE_MUX))) {
 			/* still valid */
 			find_valid = true;
 			break;
 		}
+		pin = (struct atom_gpio_pin_assignment *)((uint8_t *)pin + sizeof(struct atom_gpio_pin_assignment));
 	}
 
 	/* If we don't find the entry that we are looking for then
-- 
2.35.1

[PATCH AUTOSEL 5.10 24/39] drm/amd/display: fix array index out of bound error in bios parser

[Sasha Levin]

From: Aurabindo Pillai <aurabindo.pillai@amd.com>

[ Upstream commit 4fc1ba4aa589ca267468ad23fedef37562227d32 ]

[Why&How]
Firmware headers dictate that gpio_pin array only has a size of 8. The
count returned from vbios however is greater than 8.

Fix this by not using array indexing but incrementing the pointer since
gpio_pin definition in atomfirmware.h is hardcoded to size 8

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/bios/bios_parser2.c   | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index 29d64e7e304f..930d2b7d3448 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -352,6 +352,7 @@ static enum bp_result get_gpio_i2c_info(
 	uint32_t count = 0;
 	unsigned int table_index = 0;
 	bool find_valid = false;
+	struct atom_gpio_pin_assignment *pin;
 
 	if (!info)
 		return BP_RESULT_BADINPUT;
@@ -379,20 +380,17 @@ static enum bp_result get_gpio_i2c_info(
 			- sizeof(struct atom_common_table_header))
 				/ sizeof(struct atom_gpio_pin_assignment);
 
+	pin = (struct atom_gpio_pin_assignment *) header->gpio_pin;
+
 	for (table_index = 0; table_index < count; table_index++) {
-		if (((record->i2c_id & I2C_HW_CAP) == (
-		header->gpio_pin[table_index].gpio_id &
-						I2C_HW_CAP)) &&
-		((record->i2c_id & I2C_HW_ENGINE_ID_MASK)  ==
-		(header->gpio_pin[table_index].gpio_id &
-					I2C_HW_ENGINE_ID_MASK)) &&
-		((record->i2c_id & I2C_HW_LANE_MUX) ==
-		(header->gpio_pin[table_index].gpio_id &
-						I2C_HW_LANE_MUX))) {
+		if (((record->i2c_id & I2C_HW_CAP) 				== (pin->gpio_id & I2C_HW_CAP)) &&
+		    ((record->i2c_id & I2C_HW_ENGINE_ID_MASK)	== (pin->gpio_id & I2C_HW_ENGINE_ID_MASK)) &&
+		    ((record->i2c_id & I2C_HW_LANE_MUX) 		== (pin->gpio_id & I2C_HW_LANE_MUX))) {
 			/* still valid */
 			find_valid = true;
 			break;
 		}
+		pin = (struct atom_gpio_pin_assignment *)((uint8_t *)pin + sizeof(struct atom_gpio_pin_assignment));
 	}
 
 	/* If we don't find the entry that we are looking for then
-- 
2.35.1

[PATCH AUTOSEL 5.10 25/39] net: add atomic_long_t to net_device_stats fields

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 6c1c5097781f563b70a81683ea6fdac21637573b ]

Long standing KCSAN issues are caused by data-race around
some dev->stats changes.

Most performance critical paths already use per-cpu
variables, or per-queue ones.

It is reasonable (and more correct) to use atomic operations
for the slow paths.

This patch adds an union for each field of net_device_stats,
so that we can convert paths that are not yet protected
by a spinlock or a mutex.

netdev_stats_to_stats64() no longer has an #if BITS_PER_LONG==64

Note that the memcpy() we were using on 64bit arches
had no provision to avoid load-tearing,
while atomic_long_read() is providing the needed protection
at no cost.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netdevice.h | 58 +++++++++++++++++++++++----------------
 include/net/dst.h         |  5 ++--
 net/core/dev.c            | 14 ++--------
 3 files changed, 40 insertions(+), 37 deletions(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index ef75567efd27..b478a16ef284 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -166,31 +166,38 @@ static inline bool dev_xmit_complete(int rc)
  *	(unsigned long) so they can be read and written atomically.
  */
 
+#define NET_DEV_STAT(FIELD)			\
+	union {					\
+		unsigned long FIELD;		\
+		atomic_long_t __##FIELD;	\
+	}
+
 struct net_device_stats {
-	unsigned long	rx_packets;
-	unsigned long	tx_packets;
-	unsigned long	rx_bytes;
-	unsigned long	tx_bytes;
-	unsigned long	rx_errors;
-	unsigned long	tx_errors;
-	unsigned long	rx_dropped;
-	unsigned long	tx_dropped;
-	unsigned long	multicast;
-	unsigned long	collisions;
-	unsigned long	rx_length_errors;
-	unsigned long	rx_over_errors;
-	unsigned long	rx_crc_errors;
-	unsigned long	rx_frame_errors;
-	unsigned long	rx_fifo_errors;
-	unsigned long	rx_missed_errors;
-	unsigned long	tx_aborted_errors;
-	unsigned long	tx_carrier_errors;
-	unsigned long	tx_fifo_errors;
-	unsigned long	tx_heartbeat_errors;
-	unsigned long	tx_window_errors;
-	unsigned long	rx_compressed;
-	unsigned long	tx_compressed;
+	NET_DEV_STAT(rx_packets);
+	NET_DEV_STAT(tx_packets);
+	NET_DEV_STAT(rx_bytes);
+	NET_DEV_STAT(tx_bytes);
+	NET_DEV_STAT(rx_errors);
+	NET_DEV_STAT(tx_errors);
+	NET_DEV_STAT(rx_dropped);
+	NET_DEV_STAT(tx_dropped);
+	NET_DEV_STAT(multicast);
+	NET_DEV_STAT(collisions);
+	NET_DEV_STAT(rx_length_errors);
+	NET_DEV_STAT(rx_over_errors);
+	NET_DEV_STAT(rx_crc_errors);
+	NET_DEV_STAT(rx_frame_errors);
+	NET_DEV_STAT(rx_fifo_errors);
+	NET_DEV_STAT(rx_missed_errors);
+	NET_DEV_STAT(tx_aborted_errors);
+	NET_DEV_STAT(tx_carrier_errors);
+	NET_DEV_STAT(tx_fifo_errors);
+	NET_DEV_STAT(tx_heartbeat_errors);
+	NET_DEV_STAT(tx_window_errors);
+	NET_DEV_STAT(rx_compressed);
+	NET_DEV_STAT(tx_compressed);
 };
+#undef NET_DEV_STAT
 
 
 #include <linux/cache.h>
@@ -5256,4 +5263,9 @@ do {								\
 
 extern struct net_device *blackhole_netdev;
 
+/* Note: Avoid these macros in fast path, prefer per-cpu or per-queue counters. */
+#define DEV_STATS_INC(DEV, FIELD) atomic_long_inc(&(DEV)->stats.__##FIELD)
+#define DEV_STATS_ADD(DEV, FIELD, VAL) 	\
+		atomic_long_add((VAL), &(DEV)->stats.__##FIELD)
+
 #endif	/* _LINUX_NETDEVICE_H */
diff --git a/include/net/dst.h b/include/net/dst.h
index acd15c544cf3..ae2cf57d796b 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -356,9 +356,8 @@ static inline void __skb_tunnel_rx(struct sk_buff *skb, struct net_device *dev,
 static inline void skb_tunnel_rx(struct sk_buff *skb, struct net_device *dev,
 				 struct net *net)
 {
-	/* TODO : stats should be SMP safe */
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += skb->len;
+	DEV_STATS_INC(dev, rx_packets);
+	DEV_STATS_ADD(dev, rx_bytes, skb->len);
 	__skb_tunnel_rx(skb, dev, net);
 }
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 34b5aab42b91..5afe56e8e763 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -10320,24 +10320,16 @@ void netdev_run_todo(void)
 void netdev_stats_to_stats64(struct rtnl_link_stats64 *stats64,
 			     const struct net_device_stats *netdev_stats)
 {
-#if BITS_PER_LONG == 64
-	BUILD_BUG_ON(sizeof(*stats64) < sizeof(*netdev_stats));
-	memcpy(stats64, netdev_stats, sizeof(*netdev_stats));
-	/* zero out counters that only exist in rtnl_link_stats64 */
-	memset((char *)stats64 + sizeof(*netdev_stats), 0,
-	       sizeof(*stats64) - sizeof(*netdev_stats));
-#else
-	size_t i, n = sizeof(*netdev_stats) / sizeof(unsigned long);
-	const unsigned long *src = (const unsigned long *)netdev_stats;
+	size_t i, n = sizeof(*netdev_stats) / sizeof(atomic_long_t);
+	const atomic_long_t *src = (atomic_long_t *)netdev_stats;
 	u64 *dst = (u64 *)stats64;
 
 	BUILD_BUG_ON(n > sizeof(*stats64) / sizeof(u64));
 	for (i = 0; i < n; i++)
-		dst[i] = src[i];
+		dst[i] = atomic_long_read(&src[i]);
 	/* zero out counters that only exist in rtnl_link_stats64 */
 	memset((char *)stats64 + n * sizeof(u64), 0,
 	       sizeof(*stats64) - n * sizeof(u64));
-#endif
 }
 EXPORT_SYMBOL(netdev_stats_to_stats64);
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 26/39] mrp: introduce active flags to prevent UAF when applicant uninit

[Sasha Levin]

From: Schspa Shi <schspa@gmail.com>

[ Upstream commit ab0377803dafc58f1e22296708c1c28e309414d6 ]

The caller of del_timer_sync must prevent restarting of the timer, If
we have no this synchronization, there is a small probability that the
cancellation will not be successful.

And syzbot report the fellowing crash:
==================================================================
BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline]
BUG: KASAN: use-after-free in enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
Write at addr f9ff000024df6058 by task syz-fuzzer/2256
Pointer tag: [f9], memory tag: [fe]

CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted 6.1.0-rc5-syzkaller-00008-
ge01d50cbd6ee #0
Hardware name: linux,dummy-virt (DT)
Call trace:
 dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156
 dump_backtrace arch/arm64/kernel/stacktrace.c:162 [inline]
 show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:284 [inline]
 print_report+0x1a8/0x4a0 mm/kasan/report.c:395
 kasan_report+0x94/0xb4 mm/kasan/report.c:495
 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320
 do_bad_area arch/arm64/mm/fault.c:473 [inline]
 do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749
 do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825
 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367
 el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427
 el1h_64_sync+0x64/0x68 arch/arm64/kernel/entry.S:576
 hlist_add_head include/linux/list.h:929 [inline]
 enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
 mod_timer+0x14/0x20 kernel/time/timer.c:1161
 mrp_periodic_timer_arm net/802/mrp.c:614 [inline]
 mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627
 call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474
 expire_timers+0x98/0xc4 kernel/time/timer.c:1519

To fix it, we can introduce a new active flags to make sure the timer will
not restart.

Reported-by: syzbot+6fd64001c20aa99e34a4@syzkaller.appspotmail.com

Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/mrp.h |  1 +
 net/802/mrp.c     | 18 +++++++++++++-----
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/include/net/mrp.h b/include/net/mrp.h
index 1c308c034e1a..a8102661fd61 100644
--- a/include/net/mrp.h
+++ b/include/net/mrp.h
@@ -120,6 +120,7 @@ struct mrp_applicant {
 	struct sk_buff		*pdu;
 	struct rb_root		mad;
 	struct rcu_head		rcu;
+	bool			active;
 };
 
 struct mrp_port {
diff --git a/net/802/mrp.c b/net/802/mrp.c
index 35e04cc5390c..c10a432a5b43 100644
--- a/net/802/mrp.c
+++ b/net/802/mrp.c
@@ -606,7 +606,10 @@ static void mrp_join_timer(struct timer_list *t)
 	spin_unlock(&app->lock);
 
 	mrp_queue_xmit(app);
-	mrp_join_timer_arm(app);
+	spin_lock(&app->lock);
+	if (likely(app->active))
+		mrp_join_timer_arm(app);
+	spin_unlock(&app->lock);
 }
 
 static void mrp_periodic_timer_arm(struct mrp_applicant *app)
@@ -620,11 +623,12 @@ static void mrp_periodic_timer(struct timer_list *t)
 	struct mrp_applicant *app = from_timer(app, t, periodic_timer);
 
 	spin_lock(&app->lock);
-	mrp_mad_event(app, MRP_EVENT_PERIODIC);
-	mrp_pdu_queue(app);
+	if (likely(app->active)) {
+		mrp_mad_event(app, MRP_EVENT_PERIODIC);
+		mrp_pdu_queue(app);
+		mrp_periodic_timer_arm(app);
+	}
 	spin_unlock(&app->lock);
-
-	mrp_periodic_timer_arm(app);
 }
 
 static int mrp_pdu_parse_end_mark(struct sk_buff *skb, int *offset)
@@ -872,6 +876,7 @@ int mrp_init_applicant(struct net_device *dev, struct mrp_application *appl)
 	app->dev = dev;
 	app->app = appl;
 	app->mad = RB_ROOT;
+	app->active = true;
 	spin_lock_init(&app->lock);
 	skb_queue_head_init(&app->queue);
 	rcu_assign_pointer(dev->mrp_port->applicants[appl->type], app);
@@ -900,6 +905,9 @@ void mrp_uninit_applicant(struct net_device *dev, struct mrp_application *appl)
 
 	RCU_INIT_POINTER(port->applicants[appl->type], NULL);
 
+	spin_lock_bh(&app->lock);
+	app->active = false;
+	spin_unlock_bh(&app->lock);
 	/* Delete timer and generate a final TX event to flush out
 	 * all pending messages before the applicant is gone.
 	 */
-- 
2.35.1

[PATCH AUTOSEL 5.10 27/39] ppp: associate skb with a device at tx

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit 9f225444467b98579cf28d94f4ad053460dfdb84 ]

Syzkaller triggered flow dissector warning with the following:

r0 = openat$ppp(0xffffffffffffff9c, &(0x7f0000000000), 0xc0802, 0x0)
ioctl$PPPIOCNEWUNIT(r0, 0xc004743e, &(0x7f00000000c0))
ioctl$PPPIOCSACTIVE(r0, 0x40107446, &(0x7f0000000240)={0x2, &(0x7f0000000180)=[{0x20, 0x0, 0x0, 0xfffff034}, {0x6}]})
pwritev(r0, &(0x7f0000000040)=[{&(0x7f0000000140)='\x00!', 0x2}], 0x1, 0x0, 0x0)

[    9.485814] WARNING: CPU: 3 PID: 329 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0x1ee0/0x1fa0
[    9.485929]  skb_get_poff+0x53/0xa0
[    9.485937]  bpf_skb_get_pay_offset+0xe/0x20
[    9.485944]  ? ppp_send_frame+0xc2/0x5b0
[    9.485949]  ? _raw_spin_unlock_irqrestore+0x40/0x60
[    9.485958]  ? __ppp_xmit_process+0x7a/0xe0
[    9.485968]  ? ppp_xmit_process+0x5b/0xb0
[    9.485974]  ? ppp_write+0x12a/0x190
[    9.485981]  ? do_iter_write+0x18e/0x2d0
[    9.485987]  ? __import_iovec+0x30/0x130
[    9.485997]  ? do_pwritev+0x1b6/0x240
[    9.486016]  ? trace_hardirqs_on+0x47/0x50
[    9.486023]  ? __x64_sys_pwritev+0x24/0x30
[    9.486026]  ? do_syscall_64+0x3d/0x80
[    9.486031]  ? entry_SYSCALL_64_after_hwframe+0x63/0xcd

Flow dissector tries to find skb net namespace either via device
or via socket. Neigher is set in ppp_send_frame, so let's manually
use ppp->dev.

Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Reported-by: syzbot+41cab52ab62ee99ed24a@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ppp/ppp_generic.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 2b9815ec4a62..b825c6a9b6dd 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -1610,6 +1610,8 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
 	int len;
 	unsigned char *cp;
 
+	skb->dev = ppp->dev;
+
 	if (proto < 0x8000) {
 #ifdef CONFIG_PPP_FILTER
 		/* check if we should pass this packet */
-- 
2.35.1

[PATCH AUTOSEL 5.10 28/39] bpf: Prevent decl_tag from being referenced in func_proto arg

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit f17472d4599697d701aa239b4c475a506bccfd19 ]

Syzkaller managed to hit another decl_tag issue:

  btf_func_proto_check kernel/bpf/btf.c:4506 [inline]
  btf_check_all_types kernel/bpf/btf.c:4734 [inline]
  btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763
  btf_parse kernel/bpf/btf.c:5042 [inline]
  btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709
  bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342
  __sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034
  __do_sys_bpf kernel/bpf/syscall.c:5093 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:5091 [inline]
  __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091
  do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48

This seems similar to commit ea68376c8bed ("bpf: prevent decl_tag from being
referenced in func_proto") but for the argument.

Reported-by: syzbot+8dd0551dda6020944c5d@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221123035422.872531-2-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/btf.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 9232938e3f96..52e704860739 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -3675,6 +3675,11 @@ static int btf_func_proto_check(struct btf_verifier_env *env,
 			break;
 		}
 
+		if (btf_type_is_resolve_source_only(arg_type)) {
+			btf_verifier_log_type(env, t, "Invalid arg#%u", i + 1);
+			return -EINVAL;
+		}
+
 		if (args[i].name_off &&
 		    (!btf_name_offset_valid(btf, args[i].name_off) ||
 		     !btf_name_valid_identifier(btf, args[i].name_off))) {
-- 
2.35.1

[PATCH AUTOSEL 5.10 29/39] ethtool: avoiding integer overflow in ethtool_phys_id()

[Sasha Levin]

From: Maxim Korotkov <korotkov.maxim.s@gmail.com>

[ Upstream commit 64a8f8f7127da228d59a39e2c5e75f86590f90b4 ]

The value of an arithmetic expression "n * id.data" is subject
to possible overflow due to a failure to cast operands to a larger data
type before performing arithmetic. Used macro for multiplication instead
operator for avoiding overflow.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221122122901.22294-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ethtool/ioctl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c
index 80d2a00d3097..47c2dd4a9b9f 100644
--- a/net/ethtool/ioctl.c
+++ b/net/ethtool/ioctl.c
@@ -1966,7 +1966,8 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
 	} else {
 		/* Driver expects to be called at twice the frequency in rc */
 		int n = rc * 2, interval = HZ / n;
-		u64 count = n * id.data, i = 0;
+		u64 count = mul_u32_u32(n, id.data);
+		u64 i = 0;
 
 		do {
 			rtnl_lock();
-- 
2.35.1

[PATCH AUTOSEL 5.10 30/39] media: dvb-frontends: fix leak of memory fw

[Sasha Levin]

From: Yan Lei <yan_lei@dahuatech.com>

[ Upstream commit a15fe8d9f1bf460a804bcf18a890bfd2cf0d5caa ]

Link: https://lore.kernel.org/linux-media/20220410061925.4107-1-chinayanlei2002@163.com
Signed-off-by: Yan Lei <yan_lei@dahuatech.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/bcm3510.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/dvb-frontends/bcm3510.c b/drivers/media/dvb-frontends/bcm3510.c
index da0ff7b44da4..68b92b4419cf 100644
--- a/drivers/media/dvb-frontends/bcm3510.c
+++ b/drivers/media/dvb-frontends/bcm3510.c
@@ -649,6 +649,7 @@ static int bcm3510_download_firmware(struct dvb_frontend* fe)
 		deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04zx\n",addr,len,fw->size);
 		if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) {
 			err("firmware download failed: %d\n",ret);
+			release_firmware(fw);
 			return ret;
 		}
 		i += 4 + len;
-- 
2.35.1

[PATCH AUTOSEL 5.10 31/39] media: dvbdev: adopts refcnt to avoid UAF

[Sasha Levin]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit 0fc044b2b5e2d05a1fa1fb0d7f270367a7855d79 ]

dvb_unregister_device() is known that prone to use-after-free.
That is, the cleanup from dvb_unregister_device() releases the dvb_device
even if there are pointers stored in file->private_data still refer to it.

This patch adds a reference counter into struct dvb_device and delays its
deallocation until no pointer refers to the object.

Link: https://lore.kernel.org/linux-media/20220807145952.10368-1-linma@zju.edu.cn
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_ca_en50221.c |  2 +-
 drivers/media/dvb-core/dvb_frontend.c   |  2 +-
 drivers/media/dvb-core/dvbdev.c         | 32 +++++++++++++++++++------
 include/media/dvbdev.h                  | 31 +++++++++++++-----------
 4 files changed, 44 insertions(+), 23 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c
index cfc27629444f..fd476536d32e 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -157,7 +157,7 @@ static void dvb_ca_private_free(struct dvb_ca_private *ca)
 {
 	unsigned int i;
 
-	dvb_free_device(ca->dvbdev);
+	dvb_device_put(ca->dvbdev);
 	for (i = 0; i < ca->slot_count; i++)
 		vfree(ca->slot_info[i].rx_buffer.data);
 
diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index 06ea30a689d7..e18ed517db98 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -135,7 +135,7 @@ static void __dvb_frontend_free(struct dvb_frontend *fe)
 	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	if (fepriv)
-		dvb_free_device(fepriv->dvbdev);
+		dvb_device_put(fepriv->dvbdev);
 
 	dvb_frontend_invoke_release(fe, fe->ops.release);
 
diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index ec9ebff28552..7b28b483e4b2 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -107,7 +107,7 @@ static int dvb_device_open(struct inode *inode, struct file *file)
 		new_fops = fops_get(dvbdev->fops);
 		if (!new_fops)
 			goto fail;
-		file->private_data = dvbdev;
+		file->private_data = dvb_device_get(dvbdev);
 		replace_fops(file, new_fops);
 		if (file->f_op->open)
 			err = file->f_op->open(inode, file);
@@ -171,6 +171,9 @@ int dvb_generic_release(struct inode *inode, struct file *file)
 	}
 
 	dvbdev->users++;
+
+	dvb_device_put(dvbdev);
+
 	return 0;
 }
 EXPORT_SYMBOL(dvb_generic_release);
@@ -487,6 +490,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		return -ENOMEM;
 	}
 
+	kref_init(&dvbdev->ref);
 	memcpy(dvbdev, template, sizeof(struct dvb_device));
 	dvbdev->type = type;
 	dvbdev->id = id;
@@ -517,7 +521,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 #endif
 
 	dvbdev->minor = minor;
-	dvb_minors[minor] = dvbdev;
+	dvb_minors[minor] = dvb_device_get(dvbdev);
 	up_write(&minor_rwsem);
 
 	ret = dvb_register_media_device(dvbdev, type, minor, demux_sink_pads);
@@ -557,6 +561,7 @@ void dvb_remove_device(struct dvb_device *dvbdev)
 
 	down_write(&minor_rwsem);
 	dvb_minors[dvbdev->minor] = NULL;
+	dvb_device_put(dvbdev);
 	up_write(&minor_rwsem);
 
 	dvb_media_device_free(dvbdev);
@@ -568,21 +573,34 @@ void dvb_remove_device(struct dvb_device *dvbdev)
 EXPORT_SYMBOL(dvb_remove_device);
 
 
-void dvb_free_device(struct dvb_device *dvbdev)
+static void dvb_free_device(struct kref *ref)
 {
-	if (!dvbdev)
-		return;
+	struct dvb_device *dvbdev = container_of(ref, struct dvb_device, ref);
 
 	kfree (dvbdev->fops);
 	kfree (dvbdev);
 }
-EXPORT_SYMBOL(dvb_free_device);
+
+
+struct dvb_device *dvb_device_get(struct dvb_device *dvbdev)
+{
+	kref_get(&dvbdev->ref);
+	return dvbdev;
+}
+EXPORT_SYMBOL(dvb_device_get);
+
+
+void dvb_device_put(struct dvb_device *dvbdev)
+{
+	if (dvbdev)
+		kref_put(&dvbdev->ref, dvb_free_device);
+}
 
 
 void dvb_unregister_device(struct dvb_device *dvbdev)
 {
 	dvb_remove_device(dvbdev);
-	dvb_free_device(dvbdev);
+	dvb_device_put(dvbdev);
 }
 EXPORT_SYMBOL(dvb_unregister_device);
 
diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h
index e547cbeee431..6e736587aa1f 100644
--- a/include/media/dvbdev.h
+++ b/include/media/dvbdev.h
@@ -156,6 +156,7 @@ struct dvb_adapter {
  */
 struct dvb_device {
 	struct list_head list_head;
+	struct kref ref;
 	const struct file_operations *fops;
 	struct dvb_adapter *adapter;
 	enum dvb_device_type type;
@@ -187,6 +188,20 @@ struct dvb_device {
 	void *priv;
 };
 
+/**
+ * dvb_device_get - Increase dvb_device reference
+ *
+ * @dvbdev:	pointer to struct dvb_device
+ */
+struct dvb_device *dvb_device_get(struct dvb_device *dvbdev);
+
+/**
+ * dvb_device_get - Decrease dvb_device reference
+ *
+ * @dvbdev:	pointer to struct dvb_device
+ */
+void dvb_device_put(struct dvb_device *dvbdev);
+
 /**
  * dvb_register_adapter - Registers a new DVB adapter
  *
@@ -231,29 +246,17 @@ int dvb_register_device(struct dvb_adapter *adap,
 /**
  * dvb_remove_device - Remove a registered DVB device
  *
- * This does not free memory.  To do that, call dvb_free_device().
+ * This does not free memory. dvb_free_device() will do that when
+ * reference counter is empty
  *
  * @dvbdev:	pointer to struct dvb_device
  */
 void dvb_remove_device(struct dvb_device *dvbdev);
 
-/**
- * dvb_free_device - Free memory occupied by a DVB device.
- *
- * Call dvb_unregister_device() before calling this function.
- *
- * @dvbdev:	pointer to struct dvb_device
- */
-void dvb_free_device(struct dvb_device *dvbdev);
 
 /**
  * dvb_unregister_device - Unregisters a DVB device
  *
- * This is a combination of dvb_remove_device() and dvb_free_device().
- * Using this function is usually a mistake, and is often an indicator
- * for a use-after-free bug (when a userspace process keeps a file
- * handle to a detached device).
- *
  * @dvbdev:	pointer to struct dvb_device
  */
 void dvb_unregister_device(struct dvb_device *dvbdev);
-- 
2.35.1

[PATCH AUTOSEL 5.10 32/39] media: dvb-usb: fix memory leak in dvb_usb_adapter_init()

[Sasha Levin]

From: Mazin Al Haddad <mazinalhaddad05@gmail.com>

[ Upstream commit 94d90fb06b94a90c176270d38861bcba34ce377d ]

Syzbot reports a memory leak in "dvb_usb_adapter_init()".
The leak is due to not accounting for and freeing current iteration's
adapter->priv in case of an error. Currently if an error occurs,
it will exit before incrementing "num_adapters_initalized",
which is used as a reference counter to free all adap->priv
in "dvb_usb_adapter_exit()". There are multiple error paths that
can exit from before incrementing the counter. Including the
error handling paths for "dvb_usb_adapter_stream_init()",
"dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()"
within "dvb_usb_adapter_init()".

This means that in case of an error in any of these functions the
current iteration is not accounted for and the current iteration's
adap->priv is not freed.

Fix this by freeing the current iteration's adap->priv in the
"stream_init_err:" label in the error path. The rest of the
(accounted for) adap->priv objects are freed in dvb_usb_adapter_exit()
as expected using the num_adapters_initalized variable.

Syzbot report:

BUG: memory leak
unreferenced object 0xffff8881172f1a00 (size 512):
  comm "kworker/0:2", pid 139, jiffies 4294994873 (age 10.960s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
backtrace:
    [<ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline]
    [<ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline]
    [<ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308
    [<ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883
    [<ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
    [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
    [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
    [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
    [<ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782
    [<ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899
    [<ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970
    [<ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405
    [<ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170
    [<ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
    [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
    [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
    [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752

Link: https://syzkaller.appspot.com/bug?extid=f66dd31987e6740657be
Reported-and-tested-by: syzbot+f66dd31987e6740657be@syzkaller.appspotmail.com

Link: https://lore.kernel.org/linux-media/20220824012152.539788-1-mazinalhaddad05@gmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dvb-usb-init.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 61439c8f33ca..58eea8ab5477 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -81,7 +81,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 
 		ret = dvb_usb_adapter_stream_init(adap);
 		if (ret)
-			return ret;
+			goto stream_init_err;
 
 		ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs);
 		if (ret)
@@ -114,6 +114,8 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 	dvb_usb_adapter_dvb_exit(adap);
 dvb_init_err:
 	dvb_usb_adapter_stream_exit(adap);
+stream_init_err:
+	kfree(adap->priv);
 	return ret;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 33/39] blk-mq: fix possible memleak when register 'hctx' failed

[Sasha Levin]

From: Ye Bin <yebin10@huawei.com>

[ Upstream commit 4b7a21c57b14fbcd0e1729150189e5933f5088e9 ]

There's issue as follows when do fault injection test:
unreferenced object 0xffff888132a9f400 (size 512):
  comm "insmod", pid 308021, jiffies 4324277909 (age 509.733s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 f4 a9 32 81 88 ff ff  ...........2....
    08 f4 a9 32 81 88 ff ff 00 00 00 00 00 00 00 00  ...2............
  backtrace:
    [<00000000e8952bb4>] kmalloc_node_trace+0x22/0xa0
    [<00000000f9980e0f>] blk_mq_alloc_and_init_hctx+0x3f1/0x7e0
    [<000000002e719efa>] blk_mq_realloc_hw_ctxs+0x1e6/0x230
    [<000000004f1fda40>] blk_mq_init_allocated_queue+0x27e/0x910
    [<00000000287123ec>] __blk_mq_alloc_disk+0x67/0xf0
    [<00000000a2a34657>] 0xffffffffa2ad310f
    [<00000000b173f718>] 0xffffffffa2af824a
    [<0000000095a1dabb>] do_one_initcall+0x87/0x2a0
    [<00000000f32fdf93>] do_init_module+0xdf/0x320
    [<00000000cbe8541e>] load_module+0x3006/0x3390
    [<0000000069ed1bdb>] __do_sys_finit_module+0x113/0x1b0
    [<00000000a1a29ae8>] do_syscall_64+0x35/0x80
    [<000000009cd878b0>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fault injection context as follows:
 kobject_add
 blk_mq_register_hctx
 blk_mq_sysfs_register
 blk_register_queue
 device_add_disk
 null_add_dev.part.0 [null_blk]

As 'blk_mq_register_hctx' may already add some objects when failed halfway,
but there isn't do fallback, caller don't know which objects add failed.
To solve above issue just do fallback when add objects failed halfway in
'blk_mq_register_hctx'.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221117022940.873959-1-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq-sysfs.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/block/blk-mq-sysfs.c b/block/blk-mq-sysfs.c
index 7b52e7657b2d..f0bc3398f3ed 100644
--- a/block/blk-mq-sysfs.c
+++ b/block/blk-mq-sysfs.c
@@ -242,7 +242,7 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
 {
 	struct request_queue *q = hctx->queue;
 	struct blk_mq_ctx *ctx;
-	int i, ret;
+	int i, j, ret;
 
 	if (!hctx->nr_ctx)
 		return 0;
@@ -254,9 +254,16 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
 	hctx_for_each_ctx(hctx, ctx, i) {
 		ret = kobject_add(&ctx->kobj, &hctx->kobj, "cpu%u", ctx->cpu);
 		if (ret)
-			break;
+			goto out;
 	}
 
+	return 0;
+out:
+	hctx_for_each_ctx(hctx, ctx, j) {
+		if (j < i)
+			kobject_del(&ctx->kobj);
+	}
+	kobject_del(&hctx->kobj);
 	return ret;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.10 34/39] libbpf: Avoid enum forward-declarations in public API in C++ mode

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit b42693415b86f608049cf1b4870adc1dc65e58b0 ]

C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.

More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:

  enum bpf_stats_type: int;

In C (and I believe it's a GCC extension also), such forward declaration
is simply:

  enum bpf_stats_type;

Further, in Linux UAPI this enum is defined in pure C way:

enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }

And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.

To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.

  [0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
  [1] Closes: https://github.com/libbpf/libbpf/issues/249

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/bpf.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index 875dde20d56e..92a3eaa154dd 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -241,8 +241,15 @@ LIBBPF_API int bpf_task_fd_query(int pid, int fd, __u32 flags, char *buf,
 				 __u32 *buf_len, __u32 *prog_id, __u32 *fd_type,
 				 __u64 *probe_offset, __u64 *probe_addr);
 
+#ifdef __cplusplus
+/* forward-declaring enums in C++ isn't compatible with pure C enums, so
+ * instead define bpf_enable_stats() as accepting int as an input
+ */
+LIBBPF_API int bpf_enable_stats(int type);
+#else
 enum bpf_stats_type; /* defined in up-to-date linux/bpf.h */
 LIBBPF_API int bpf_enable_stats(enum bpf_stats_type type);
+#endif
 
 struct bpf_prog_bind_opts {
 	size_t sz; /* size of this struct for forward/backward compatibility */
-- 
2.35.1

[PATCH AUTOSEL 5.10 35/39] regulator: core: fix use_count leakage when handling boot-on

[Sasha Levin]

From: Rui Zhang <zr.zhang@vivo.com>

[ Upstream commit 0591b14ce0398125439c759f889647369aa616a0 ]

I found a use_count leakage towards supply regulator of rdev with
boot-on option.

┌───────────────────┐           ┌───────────────────┐
│  regulator_dev A  │           │  regulator_dev B  │
│     (boot-on)     │           │     (boot-on)     │
│    use_count=0    │◀──supply──│    use_count=1    │
│                   │           │                   │
└───────────────────┘           └───────────────────┘

In case of rdev(A) configured with `regulator-boot-on', the use_count
of supplying regulator(B) will increment inside
regulator_enable(rdev->supply).

Thus, B will acts like always-on, and further balanced
regulator_enable/disable cannot actually disable it anymore.

However, B was also configured with `regulator-boot-on', we wish it
could be disabled afterwards.

Signed-off-by: Rui Zhang <zr.zhang@vivo.com>
Link: https://lore.kernel.org/r/20221201033806.2567812-1-zr.zhang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/core.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index eb083b26ab4f..d23b403ae162 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1428,7 +1428,13 @@ static int set_machine_constraints(struct regulator_dev *rdev)
 		if (rdev->supply_name && !rdev->supply)
 			return -EPROBE_DEFER;
 
-		if (rdev->supply) {
+		/* If supplying regulator has already been enabled,
+		 * it's not intended to have use_count increment
+		 * when rdev is only boot-on.
+		 */
+		if (rdev->supply &&
+		    (rdev->constraints->always_on ||
+		     !regulator_is_enabled(rdev->supply))) {
 			ret = regulator_enable(rdev->supply);
 			if (ret < 0) {
 				_regulator_put(rdev->supply);
-- 
2.35.1

[PATCH AUTOSEL 5.10 36/39] mmc: f-sdh30: Add quirks for broken timeout clock capability

[Sasha Levin]

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit aae9d3a440736691b3c1cb09ae2c32c4f1ee2e67 ]

There is a case where the timeout clock is not supplied to the capability.
Add a quirk for that.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20221111081033.3813-7-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci_f_sdh30.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c
index 3f5977979cf2..6c4f43e11282 100644
--- a/drivers/mmc/host/sdhci_f_sdh30.c
+++ b/drivers/mmc/host/sdhci_f_sdh30.c
@@ -168,6 +168,9 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev)
 	if (reg & SDHCI_CAN_DO_8BIT)
 		priv->vendor_hs200 = F_SDH30_EMMC_HS200;
 
+	if (!(reg & SDHCI_TIMEOUT_CLK_MASK))
+		host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+
 	ret = sdhci_add_host(host);
 	if (ret)
 		goto err_add_host;
-- 
2.35.1

[PATCH AUTOSEL 5.10 37/39] mmc: renesas_sdhi: better reset from HS400 mode

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 0da69dd2155019ed4c444ede0e79ce7a4a6af627 ]

Up to now, HS400 adjustment mode was only disabled on soft reset when a
calibration table was in use. It is safer, though, to disable it as soon
as the instance has an adjustment related quirk set, i.e. bad taps or a
calibration table.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/renesas_sdhi_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index ac01fb518386..a49b8fe2a098 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -537,7 +537,7 @@ static void renesas_sdhi_reset_hs400_mode(struct tmio_mmc_host *host,
 			 SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) &
 			sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2));
 
-	if (priv->adjust_hs400_calib_table)
+	if (priv->quirks && (priv->quirks->hs400_calib_table || priv->quirks->hs400_bad_taps))
 		renesas_sdhi_adjust_hs400_mode_disable(host);
 
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
-- 
2.35.1

[PATCH AUTOSEL 5.10 38/39] media: si470x: Fix use-after-free in si470x_int_in_callback()

[Sasha Levin]

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit 7d21e0b1b41b21d628bf2afce777727bd4479aa5 ]

syzbot reported use-after-free in si470x_int_in_callback() [1].  This
indicates that urb->context, which contains struct si470x_device
object, is freed when si470x_int_in_callback() is called.

The cause of this issue is that si470x_int_in_callback() is called for
freed urb.

si470x_usb_driver_probe() calls si470x_start_usb(), which then calls
usb_submit_urb() and si470x_start().  If si470x_start_usb() fails,
si470x_usb_driver_probe() doesn't kill urb, but it just frees struct
si470x_device object, as depicted below:

si470x_usb_driver_probe()
  ...
  si470x_start_usb()
    ...
    usb_submit_urb()
    retval = si470x_start()
    return retval
  if (retval < 0)
    free struct si470x_device object, but don't kill urb

This patch fixes this issue by killing urb when si470x_start_usb()
fails and urb is submitted.  If si470x_start_usb() fails and urb is
not submitted, i.e. submitting usb fails, it just frees struct
si470x_device object.

Reported-by: syzbot+9ca7a12fd736d93e0232@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=94ed6dddd5a55e90fd4bab942aa4bb297741d977 [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/radio/si470x/radio-si470x-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index 3f8634a46573..1365ae732b79 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -733,8 +733,10 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 
 	/* start radio */
 	retval = si470x_start_usb(radio);
-	if (retval < 0)
+	if (retval < 0 && !radio->int_in_running)
 		goto err_buf;
+	else if (retval < 0)	/* in case of radio->int_in_running == 1 */
+		goto err_all;
 
 	/* set initial frequency */
 	si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
-- 
2.35.1

[PATCH AUTOSEL 5.10 39/39] clk: st: Fix memory leak in st_of_quadfs_setup()

[Sasha Levin]

From: Xiu Jianfeng <xiujianfeng@huawei.com>

[ Upstream commit cfd3ffb36f0d566846163118651d868e607300ba ]

If st_clk_register_quadfs_pll() fails, @lock should be freed before goto
@err_exit, otherwise will cause meory leak issue, fix it.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221122133614.184910-1-xiujianfeng@huawei.com
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/st/clkgen-fsyn.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index f1adc858b590..0e58a7cda427 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -942,9 +942,10 @@ static void __init st_of_quadfs_setup(struct device_node *np,
 
 	clk = st_clk_register_quadfs_pll(pll_name, clk_parent_name, data,
 			reg, lock);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
+		kfree(lock);
 		goto err_exit;
-	else
+	} else
 		pr_debug("%s: parent %s rate %u\n",
 			__clk_get_name(clk),
 			__clk_get_name(clk_get_parent(clk)),
-- 
2.35.1