[PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
for 8 channel ADCs for J721s2 SoC.

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
 2 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a7aa6cf08acd..67593aa69327 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -309,3 +309,17 @@ &mcu_mcan1 {
 	pinctrl-0 = <&mcu_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 0af242aa9816..ad1bc31619c4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -306,4 +306,44 @@ cpts@3d000 {
 			ti,cpts-periodic-outputs = <2>;
 		};
 	};
-};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+ };
\ No newline at end of file
-- 
2.37.2

[PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
for 8 channel ADCs for J721s2 SoC.

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
 2 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a7aa6cf08acd..67593aa69327 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -309,3 +309,17 @@ &mcu_mcan1 {
 	pinctrl-0 = <&mcu_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 0af242aa9816..ad1bc31619c4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -306,4 +306,44 @@ cpts@3d000 {
 			ti,cpts-periodic-outputs = <2>;
 		};
 	};
-};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+ };
\ No newline at end of file
-- 
2.37.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 20/12/2022 11:12, Bhavya Kapoor wrote:
> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
> for 8 channel ADCs for J721s2 SoC.
> 
> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
> ---
>  .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>  .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>  2 files changed, 55 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index a7aa6cf08acd..67593aa69327 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>  	pinctrl-0 = <&mcu_mcan1_pins_default>;
>  	phys = <&transceiver2>;
>  };
> +
> +&tscadc0 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> +
> +&tscadc1 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> \ No newline at end of file

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof

Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 20/12/2022 11:12, Bhavya Kapoor wrote:
> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
> for 8 channel ADCs for J721s2 SoC.
> 
> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
> ---
>  .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>  .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>  2 files changed, 55 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index a7aa6cf08acd..67593aa69327 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>  	pinctrl-0 = <&mcu_mcan1_pins_default>;
>  	phys = <&transceiver2>;
>  };
> +
> +&tscadc0 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> +
> +&tscadc1 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> \ No newline at end of file

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

On 20/12/22 16:20, Krzysztof Kozlowski wrote:
> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>> for 8 channel ADCs for J721s2 SoC.
>>
>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>> ---
>>   .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>   .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>   2 files changed, 55 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> index a7aa6cf08acd..67593aa69327 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>   	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>   	phys = <&transceiver2>;
>>   };
>> +
>> +&tscadc0 {
>> +	status = "okay";
>> +	adc {
>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> +	};
>> +};
>> +
>> +&tscadc1 {
>> +	status = "okay";
>> +	adc {
>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> +	};
>> +};
>> \ No newline at end of file
> This is a friendly reminder during the review process.
>
> It seems my previous comments were not fully addressed. Maybe my
> feedback got lost between the quotes, maybe you just forgot to apply it.
> Please go back to the previous discussion and either implement all
> requested changes or keep discussing them.
>
> Thank you.
>
> Best regards,
> Krzysztof

Hi , I thought i did addressed the feedback since tscadc is just a 
wrapper node.

The actual adc node is inside of tscadc node.

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

On 20/12/22 16:20, Krzysztof Kozlowski wrote:
> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>> for 8 channel ADCs for J721s2 SoC.
>>
>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>> ---
>>   .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>   .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>   2 files changed, 55 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> index a7aa6cf08acd..67593aa69327 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>   	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>   	phys = <&transceiver2>;
>>   };
>> +
>> +&tscadc0 {
>> +	status = "okay";
>> +	adc {
>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> +	};
>> +};
>> +
>> +&tscadc1 {
>> +	status = "okay";
>> +	adc {
>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> +	};
>> +};
>> \ No newline at end of file
> This is a friendly reminder during the review process.
>
> It seems my previous comments were not fully addressed. Maybe my
> feedback got lost between the quotes, maybe you just forgot to apply it.
> Please go back to the previous discussion and either implement all
> requested changes or keep discussing them.
>
> Thank you.
>
> Best regards,
> Krzysztof

Hi , I thought i did addressed the feedback since tscadc is just a 
wrapper node.

The actual adc node is inside of tscadc node.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 21/12/2022 06:42, Bhavya Kapoor wrote:
> 
> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>> for 8 channel ADCs for J721s2 SoC.
>>>
>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>> ---
>>>   .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>   .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>   2 files changed, 55 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> index a7aa6cf08acd..67593aa69327 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>   	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>   	phys = <&transceiver2>;
>>>   };
>>> +
>>> +&tscadc0 {
>>> +	status = "okay";
>>> +	adc {
>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>> +	};
>>> +};
>>> +
>>> +&tscadc1 {
>>> +	status = "okay";
>>> +	adc {
>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>> +	};
>>> +};
>>> \ No newline at end of file
>> This is a friendly reminder during the review process.
>>
>> It seems my previous comments were not fully addressed. Maybe my
>> feedback got lost between the quotes, maybe you just forgot to apply it.
>> Please go back to the previous discussion and either implement all
>> requested changes or keep discussing them.
>>
>> Thank you.
>>
>> Best regards,
>> Krzysztof
> 
> Hi , I thought i did addressed the feedback since tscadc is just a 
> wrapper node.
> 
> The actual adc node is inside of tscadc node.

Read the feedback, from all emails.
Best regards,
Krzysztof

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 21/12/2022 06:42, Bhavya Kapoor wrote:
> 
> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>> for 8 channel ADCs for J721s2 SoC.
>>>
>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>> ---
>>>   .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>   .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>   2 files changed, 55 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> index a7aa6cf08acd..67593aa69327 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>   	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>   	phys = <&transceiver2>;
>>>   };
>>> +
>>> +&tscadc0 {
>>> +	status = "okay";
>>> +	adc {
>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>> +	};
>>> +};
>>> +
>>> +&tscadc1 {
>>> +	status = "okay";
>>> +	adc {
>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>> +	};
>>> +};
>>> \ No newline at end of file
>> This is a friendly reminder during the review process.
>>
>> It seems my previous comments were not fully addressed. Maybe my
>> feedback got lost between the quotes, maybe you just forgot to apply it.
>> Please go back to the previous discussion and either implement all
>> requested changes or keep discussing them.
>>
>> Thank you.
>>
>> Best regards,
>> Krzysztof
> 
> Hi , I thought i did addressed the feedback since tscadc is just a 
> wrapper node.
> 
> The actual adc node is inside of tscadc node.

Read the feedback, from all emails.
Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

On 21/12/22 13:24, Krzysztof Kozlowski wrote:
> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>> for 8 channel ADCs for J721s2 SoC.
>>>>
>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>> ---
>>>>    .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>    .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>    2 files changed, 55 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>> index a7aa6cf08acd..67593aa69327 100644
>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>    	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>    	phys = <&transceiver2>;
>>>>    };
>>>> +
>>>> +&tscadc0 {
>>>> +	status = "okay";
>>>> +	adc {
>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>> +	};
>>>> +};
>>>> +
>>>> +&tscadc1 {
>>>> +	status = "okay";
>>>> +	adc {
>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>> +	};
>>>> +};
>>>> \ No newline at end of file
>>> This is a friendly reminder during the review process.
>>>
>>> It seems my previous comments were not fully addressed. Maybe my
>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>> Please go back to the previous discussion and either implement all
>>> requested changes or keep discussing them.
>>>
>>> Thank you.
>>>
>>> Best regards,
>>> Krzysztof
>> Hi , I thought i did addressed the feedback since tscadc is just a
>> wrapper node.
>>
>> The actual adc node is inside of tscadc node.
> Read the feedback, from all emails.
> Best regards,
> Krzysztof


Hi , i have gone through all earlier mails but can't find anything else. 
Can you point out again whats the issue.

Regards

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

On 21/12/22 13:24, Krzysztof Kozlowski wrote:
> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>> for 8 channel ADCs for J721s2 SoC.
>>>>
>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>> ---
>>>>    .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>    .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>    2 files changed, 55 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>> index a7aa6cf08acd..67593aa69327 100644
>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>    	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>    	phys = <&transceiver2>;
>>>>    };
>>>> +
>>>> +&tscadc0 {
>>>> +	status = "okay";
>>>> +	adc {
>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>> +	};
>>>> +};
>>>> +
>>>> +&tscadc1 {
>>>> +	status = "okay";
>>>> +	adc {
>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>> +	};
>>>> +};
>>>> \ No newline at end of file
>>> This is a friendly reminder during the review process.
>>>
>>> It seems my previous comments were not fully addressed. Maybe my
>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>> Please go back to the previous discussion and either implement all
>>> requested changes or keep discussing them.
>>>
>>> Thank you.
>>>
>>> Best regards,
>>> Krzysztof
>> Hi , I thought i did addressed the feedback since tscadc is just a
>> wrapper node.
>>
>> The actual adc node is inside of tscadc node.
> Read the feedback, from all emails.
> Best regards,
> Krzysztof


Hi , i have gone through all earlier mails but can't find anything else. 
Can you point out again whats the issue.

Regards


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 22/12/2022 11:39, Bhavya Kapoor wrote:
> 
> On 21/12/22 13:24, Krzysztof Kozlowski wrote:
>> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>>> for 8 channel ADCs for J721s2 SoC.
>>>>>
>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>>> ---
>>>>>    .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>>    .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>>    2 files changed, 55 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>> index a7aa6cf08acd..67593aa69327 100644
>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>>    	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>>    	phys = <&transceiver2>;
>>>>>    };
>>>>> +
>>>>> +&tscadc0 {
>>>>> +	status = "okay";
>>>>> +	adc {
>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>> +	};
>>>>> +};
>>>>> +
>>>>> +&tscadc1 {
>>>>> +	status = "okay";
>>>>> +	adc {
>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>> +	};
>>>>> +};
>>>>> \ No newline at end of file
>>>> This is a friendly reminder during the review process.
>>>>
>>>> It seems my previous comments were not fully addressed. Maybe my
>>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>>> Please go back to the previous discussion and either implement all
>>>> requested changes or keep discussing them.
>>>>
>>>> Thank you.
>>>>
>>>> Best regards,
>>>> Krzysztof
>>> Hi , I thought i did addressed the feedback since tscadc is just a
>>> wrapper node.
>>>
>>> The actual adc node is inside of tscadc node.
>> Read the feedback, from all emails.
>> Best regards,
>> Krzysztof
> 
> 
> Hi , i have gone through all earlier mails but can't find anything else. 
> Can you point out again whats the issue.

"And this is a v2? Or resend? Or something else?"

You miss proper versioning and changelog.

Additionally - I commented just before error in your patch. You must fix
it, not ignore it, even though I did not point it out before.

Best regards,
Krzysztof

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 22/12/2022 11:39, Bhavya Kapoor wrote:
> 
> On 21/12/22 13:24, Krzysztof Kozlowski wrote:
>> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>>> for 8 channel ADCs for J721s2 SoC.
>>>>>
>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>>> ---
>>>>>    .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>>    .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>>    2 files changed, 55 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>> index a7aa6cf08acd..67593aa69327 100644
>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>>    	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>>    	phys = <&transceiver2>;
>>>>>    };
>>>>> +
>>>>> +&tscadc0 {
>>>>> +	status = "okay";
>>>>> +	adc {
>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>> +	};
>>>>> +};
>>>>> +
>>>>> +&tscadc1 {
>>>>> +	status = "okay";
>>>>> +	adc {
>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>> +	};
>>>>> +};
>>>>> \ No newline at end of file
>>>> This is a friendly reminder during the review process.
>>>>
>>>> It seems my previous comments were not fully addressed. Maybe my
>>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>>> Please go back to the previous discussion and either implement all
>>>> requested changes or keep discussing them.
>>>>
>>>> Thank you.
>>>>
>>>> Best regards,
>>>> Krzysztof
>>> Hi , I thought i did addressed the feedback since tscadc is just a
>>> wrapper node.
>>>
>>> The actual adc node is inside of tscadc node.
>> Read the feedback, from all emails.
>> Best regards,
>> Krzysztof
> 
> 
> Hi , i have gone through all earlier mails but can't find anything else. 
> Can you point out again whats the issue.

"And this is a v2? Or resend? Or something else?"

You miss proper versioning and changelog.

Additionally - I commented just before error in your patch. You must fix
it, not ignore it, even though I did not point it out before.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

On 22/12/22 16:16, Krzysztof Kozlowski wrote:
> On 22/12/2022 11:39, Bhavya Kapoor wrote:
>> On 21/12/22 13:24, Krzysztof Kozlowski wrote:
>>> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>>>> for 8 channel ADCs for J721s2 SoC.
>>>>>>
>>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>>>> ---
>>>>>>     .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>>>     .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>>>     2 files changed, 55 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>> index a7aa6cf08acd..67593aa69327 100644
>>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>>>     	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>>>     	phys = <&transceiver2>;
>>>>>>     };
>>>>>> +
>>>>>> +&tscadc0 {
>>>>>> +	status = "okay";
>>>>>> +	adc {
>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>> +	};
>>>>>> +};
>>>>>> +
>>>>>> +&tscadc1 {
>>>>>> +	status = "okay";
>>>>>> +	adc {
>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>> +	};
>>>>>> +};
>>>>>> \ No newline at end of file
>>>>> This is a friendly reminder during the review process.
>>>>>
>>>>> It seems my previous comments were not fully addressed. Maybe my
>>>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>>>> Please go back to the previous discussion and either implement all
>>>>> requested changes or keep discussing them.
>>>>>
>>>>> Thank you.
>>>>>
>>>>> Best regards,
>>>>> Krzysztof
>>>> Hi , I thought i did addressed the feedback since tscadc is just a
>>>> wrapper node.
>>>>
>>>> The actual adc node is inside of tscadc node.
>>> Read the feedback, from all emails.
>>> Best regards,
>>> Krzysztof
>>
>> Hi , i have gone through all earlier mails but can't find anything else.
>> Can you point out again whats the issue.
> "And this is a v2? Or resend? Or something else?"
>
> You miss proper versioning and changelog.
>
> Additionally - I commented just before error in your patch. You must fix
> it, not ignore it, even though I did not point it out before.
>
> Best regards,
> Krzysztof

Hi, i had replied to that as well earlier. You can check that out 
https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ .

Maybe you missed out on that.

Regards

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

On 22/12/22 16:16, Krzysztof Kozlowski wrote:
> On 22/12/2022 11:39, Bhavya Kapoor wrote:
>> On 21/12/22 13:24, Krzysztof Kozlowski wrote:
>>> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>>>> for 8 channel ADCs for J721s2 SoC.
>>>>>>
>>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>>>> ---
>>>>>>     .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>>>     .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>>>     2 files changed, 55 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>> index a7aa6cf08acd..67593aa69327 100644
>>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>>>     	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>>>     	phys = <&transceiver2>;
>>>>>>     };
>>>>>> +
>>>>>> +&tscadc0 {
>>>>>> +	status = "okay";
>>>>>> +	adc {
>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>> +	};
>>>>>> +};
>>>>>> +
>>>>>> +&tscadc1 {
>>>>>> +	status = "okay";
>>>>>> +	adc {
>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>> +	};
>>>>>> +};
>>>>>> \ No newline at end of file
>>>>> This is a friendly reminder during the review process.
>>>>>
>>>>> It seems my previous comments were not fully addressed. Maybe my
>>>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>>>> Please go back to the previous discussion and either implement all
>>>>> requested changes or keep discussing them.
>>>>>
>>>>> Thank you.
>>>>>
>>>>> Best regards,
>>>>> Krzysztof
>>>> Hi , I thought i did addressed the feedback since tscadc is just a
>>>> wrapper node.
>>>>
>>>> The actual adc node is inside of tscadc node.
>>> Read the feedback, from all emails.
>>> Best regards,
>>> Krzysztof
>>
>> Hi , i have gone through all earlier mails but can't find anything else.
>> Can you point out again whats the issue.
> "And this is a v2? Or resend? Or something else?"
>
> You miss proper versioning and changelog.
>
> Additionally - I commented just before error in your patch. You must fix
> it, not ignore it, even though I did not point it out before.
>
> Best regards,
> Krzysztof

Hi, i had replied to that as well earlier. You can check that out 
https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ .

Maybe you missed out on that.

Regards


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 22/12/2022 12:53, Bhavya Kapoor wrote:
> 
> On 22/12/22 16:16, Krzysztof Kozlowski wrote:
>> On 22/12/2022 11:39, Bhavya Kapoor wrote:
>>> On 21/12/22 13:24, Krzysztof Kozlowski wrote:
>>>> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>>>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>>>>> for 8 channel ADCs for J721s2 SoC.
>>>>>>>
>>>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>>>>> ---
>>>>>>>     .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>>>>     .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>>>>     2 files changed, 55 insertions(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> index a7aa6cf08acd..67593aa69327 100644
>>>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>>>>     	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>>>>     	phys = <&transceiver2>;
>>>>>>>     };
>>>>>>> +
>>>>>>> +&tscadc0 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> +
>>>>>>> +&tscadc1 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> \ No newline at end of file
>>>>>> This is a friendly reminder during the review process.
>>>>>>
>>>>>> It seems my previous comments were not fully addressed. Maybe my
>>>>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>>>>> Please go back to the previous discussion and either implement all
>>>>>> requested changes or keep discussing them.
>>>>>>
>>>>>> Thank you.
>>>>>>
>>>>>> Best regards,
>>>>>> Krzysztof
>>>>> Hi , I thought i did addressed the feedback since tscadc is just a
>>>>> wrapper node.
>>>>>
>>>>> The actual adc node is inside of tscadc node.
>>>> Read the feedback, from all emails.
>>>> Best regards,
>>>> Krzysztof
>>>
>>> Hi , i have gone through all earlier mails but can't find anything else.
>>> Can you point out again whats the issue.
>> "And this is a v2? Or resend? Or something else?"
>>
>> You miss proper versioning and changelog.
>>
>> Additionally - I commented just before error in your patch. You must fix
>> it, not ignore it, even though I did not point it out before.
>>
>> Best regards,
>> Krzysztof
> 
> Hi, i had replied to that as well earlier. You can check that out 
> https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ .
> 
> Maybe you missed out on that.

So this is a duplicate? OK, then this patch can be:
NAK

Best regards,
Krzysztof

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 22/12/2022 12:53, Bhavya Kapoor wrote:
> 
> On 22/12/22 16:16, Krzysztof Kozlowski wrote:
>> On 22/12/2022 11:39, Bhavya Kapoor wrote:
>>> On 21/12/22 13:24, Krzysztof Kozlowski wrote:
>>>> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>>>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>>>>> for 8 channel ADCs for J721s2 SoC.
>>>>>>>
>>>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>>>>> ---
>>>>>>>     .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>>>>     .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>>>>     2 files changed, 55 insertions(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> index a7aa6cf08acd..67593aa69327 100644
>>>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>>>>     	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>>>>     	phys = <&transceiver2>;
>>>>>>>     };
>>>>>>> +
>>>>>>> +&tscadc0 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> +
>>>>>>> +&tscadc1 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> \ No newline at end of file
>>>>>> This is a friendly reminder during the review process.
>>>>>>
>>>>>> It seems my previous comments were not fully addressed. Maybe my
>>>>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>>>>> Please go back to the previous discussion and either implement all
>>>>>> requested changes or keep discussing them.
>>>>>>
>>>>>> Thank you.
>>>>>>
>>>>>> Best regards,
>>>>>> Krzysztof
>>>>> Hi , I thought i did addressed the feedback since tscadc is just a
>>>>> wrapper node.
>>>>>
>>>>> The actual adc node is inside of tscadc node.
>>>> Read the feedback, from all emails.
>>>> Best regards,
>>>> Krzysztof
>>>
>>> Hi , i have gone through all earlier mails but can't find anything else.
>>> Can you point out again whats the issue.
>> "And this is a v2? Or resend? Or something else?"
>>
>> You miss proper versioning and changelog.
>>
>> Additionally - I commented just before error in your patch. You must fix
>> it, not ignore it, even though I did not point it out before.
>>
>> Best regards,
>> Krzysztof
> 
> Hi, i had replied to that as well earlier. You can check that out 
> https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ .
> 
> Maybe you missed out on that.

So this is a duplicate? OK, then this patch can be:
NAK

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 22/12/2022 12:53, Bhavya Kapoor wrote:
> 
> On 22/12/22 16:16, Krzysztof Kozlowski wrote:
>> On 22/12/2022 11:39, Bhavya Kapoor wrote:
>>> On 21/12/22 13:24, Krzysztof Kozlowski wrote:
>>>> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>>>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>>>>> for 8 channel ADCs for J721s2 SoC.
>>>>>>>
>>>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>>>>> ---
>>>>>>>     .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>>>>     .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>>>>     2 files changed, 55 insertions(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> index a7aa6cf08acd..67593aa69327 100644
>>>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>>>>     	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>>>>     	phys = <&transceiver2>;
>>>>>>>     };
>>>>>>> +
>>>>>>> +&tscadc0 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> +
>>>>>>> +&tscadc1 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> \ No newline at end of file
>>>>>> This is a friendly reminder during the review process.
>>>>>>
>>>>>> It seems my previous comments were not fully addressed. Maybe my
>>>>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>>>>> Please go back to the previous discussion and either implement all
>>>>>> requested changes or keep discussing them.
>>>>>>
>>>>>> Thank you.
>>>>>>
>>>>>> Best regards,
>>>>>> Krzysztof
>>>>> Hi , I thought i did addressed the feedback since tscadc is just a
>>>>> wrapper node.
>>>>>
>>>>> The actual adc node is inside of tscadc node.
>>>> Read the feedback, from all emails.
>>>> Best regards,
>>>> Krzysztof
>>>
>>> Hi , i have gone through all earlier mails but can't find anything else.
>>> Can you point out again whats the issue.
>> "And this is a v2? Or resend? Or something else?"
>>
>> You miss proper versioning and changelog.
>>
>> Additionally - I commented just before error in your patch. You must fix
>> it, not ignore it, even though I did not point it out before.
>>
>> Best regards,
>> Krzysztof
> 
> Hi, i had replied to that as well earlier. You can check that out 
> https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ .

BTW, there is nothing there about the patch error I wrote here. If not,
please point me to the quote which addresses this patch error.

Best regards,
Krzysztof

Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 22/12/2022 12:53, Bhavya Kapoor wrote:
> 
> On 22/12/22 16:16, Krzysztof Kozlowski wrote:
>> On 22/12/2022 11:39, Bhavya Kapoor wrote:
>>> On 21/12/22 13:24, Krzysztof Kozlowski wrote:
>>>> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>>>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>>>>> for 8 channel ADCs for J721s2 SoC.
>>>>>>>
>>>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>>>>>> ---
>>>>>>>     .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>>>>     .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>>>>     2 files changed, 55 insertions(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> index a7aa6cf08acd..67593aa69327 100644
>>>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>>>>     	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>>>>     	phys = <&transceiver2>;
>>>>>>>     };
>>>>>>> +
>>>>>>> +&tscadc0 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> +
>>>>>>> +&tscadc1 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> \ No newline at end of file
>>>>>> This is a friendly reminder during the review process.
>>>>>>
>>>>>> It seems my previous comments were not fully addressed. Maybe my
>>>>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>>>>> Please go back to the previous discussion and either implement all
>>>>>> requested changes or keep discussing them.
>>>>>>
>>>>>> Thank you.
>>>>>>
>>>>>> Best regards,
>>>>>> Krzysztof
>>>>> Hi , I thought i did addressed the feedback since tscadc is just a
>>>>> wrapper node.
>>>>>
>>>>> The actual adc node is inside of tscadc node.
>>>> Read the feedback, from all emails.
>>>> Best regards,
>>>> Krzysztof
>>>
>>> Hi , i have gone through all earlier mails but can't find anything else.
>>> Can you point out again whats the issue.
>> "And this is a v2? Or resend? Or something else?"
>>
>> You miss proper versioning and changelog.
>>
>> Additionally - I commented just before error in your patch. You must fix
>> it, not ignore it, even though I did not point it out before.
>>
>> Best regards,
>> Krzysztof
> 
> Hi, i had replied to that as well earlier. You can check that out 
> https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ .

BTW, there is nothing there about the patch error I wrote here. If not,
please point me to the quote which addresses this patch error.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
for 8 channel ADCs for J721S2.

Enable ADCs present on J721S2 soc.

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
 2 files changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index b210cc07c539..de9cb40273be 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -429,3 +429,17 @@
 &main_mcan17 {
 	status = "disabled";
 };
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..47a7a6b500c2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -299,4 +299,44 @@
 			ti,cpts-periodic-outputs = <2>;
 		};
 	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
 };
-- 
2.20.1

[PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
for 8 channel ADCs for J721S2.

Enable ADCs present on J721S2 soc.

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
 2 files changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index b210cc07c539..de9cb40273be 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -429,3 +429,17 @@
 &main_mcan17 {
 	status = "disabled";
 };
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..47a7a6b500c2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -299,4 +299,44 @@
 			ti,cpts-periodic-outputs = <2>;
 		};
 	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
 };
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 08/11/2022 08:32, Bhavya Kapoor wrote:
> J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
> for 8 channel ADCs for J721S2.
> 
> Enable ADCs present on J721S2 soc.
> 
> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
> ---

And this is a v2? Or resend? Or something else?

Best regards,
Krzysztof

Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 08/11/2022 08:32, Bhavya Kapoor wrote:
> J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
> for 8 channel ADCs for J721S2.
> 
> Enable ADCs present on J721S2 soc.
> 
> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
> ---

And this is a v2? Or resend? Or something else?

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
for 8 channel ADCs for J721S2.

Enable ADCs present on J721S2 soc.

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
 2 files changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index b210cc07c539..de9cb40273be 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -429,3 +429,17 @@
 &main_mcan17 {
 	status = "disabled";
 };
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..47a7a6b500c2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -299,4 +299,44 @@
 			ti,cpts-periodic-outputs = <2>;
 		};
 	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
 };
-- 
2.20.1

[PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
for 8 channel ADCs for J721S2.

Enable ADCs present on J721S2 soc.

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
 2 files changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index b210cc07c539..de9cb40273be 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -429,3 +429,17 @@
 &main_mcan17 {
 	status = "disabled";
 };
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..47a7a6b500c2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -299,4 +299,44 @@
 			ti,cpts-periodic-outputs = <2>;
 		};
 	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
 };
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 08/11/2022 08:32, Bhavya Kapoor wrote:
> J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
> for 8 channel ADCs for J721S2.
> 
> Enable ADCs present on J721S2 soc.
> 
> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
> ---
>  .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>  .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
>  2 files changed, 54 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index b210cc07c539..de9cb40273be 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -429,3 +429,17 @@
>  &main_mcan17 {
>  	status = "disabled";
>  };
> +
> +&tscadc0 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> +
> +&tscadc1 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 4d1bfabd1313..47a7a6b500c2 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -299,4 +299,44 @@
>  			ti,cpts-periodic-outputs = <2>;
>  		};
>  	};
> +
> +	tscadc0: tscadc@40200000 {

Node names should be generic, so "adc"
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

Best regards,
Krzysztof

Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 08/11/2022 08:32, Bhavya Kapoor wrote:
> J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
> for 8 channel ADCs for J721S2.
> 
> Enable ADCs present on J721S2 soc.
> 
> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
> ---
>  .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>  .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
>  2 files changed, 54 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index b210cc07c539..de9cb40273be 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -429,3 +429,17 @@
>  &main_mcan17 {
>  	status = "disabled";
>  };
> +
> +&tscadc0 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> +
> +&tscadc1 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 4d1bfabd1313..47a7a6b500c2 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -299,4 +299,44 @@
>  			ti,cpts-periodic-outputs = <2>;
>  		};
>  	};
> +
> +	tscadc0: tscadc@40200000 {

Node names should be generic, so "adc"
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel