[PATCH v4 0/2 RESEND] Fix pm8941-misc extcon interrupt dependency assumptions

[PATCH v4 0/2 RESEND] Fix pm8941-misc extcon interrupt dependency assumptions

[Bryan O'Donoghue]

RESEND December 2022:

Hey Chanwoo could you please pick this up ?

RESEND September 2022:
- I thought I resent these at the start of this month, can't find them
  in linux-msm I think I just sent them to myself.

  No change since July 17th

V4:
- Added suggested extra log text from Marjin to extcon patch

V3:
- Adds a cover-letter since we are now doing two patches a dt-bindings fix and
  platform_get_irq_byname_optional fix.
- Add Review-by -> Rob Herring, Marijn Suijten
- Add additional patch to negate warning when one of usb_id or usb_vbus
  is not declared in the platform DTS. 

Bryan O'Donoghue (2):
  dt-bindings: pm8941-misc: Fix usb_id and usb_vbus definitions
  extcon: qcom-spmi: Switch to platform_get_irq_byname_optional

 .../devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 12 ++++++++----
 drivers/extcon/extcon-qcom-spmi-misc.c               |  4 ++--
 2 files changed, 10 insertions(+), 6 deletions(-)

-- 
2.34.1

[PATCH v4 1/2 RESEND] dt-bindings: pm8941-misc: Fix usb_id and usb_vbus definitions

[Bryan O'Donoghue]

dts validation is throwing an error for me on 8916 and 8939 with
extcon@1300. In that case we have usb_vbus but not usb_id.

It wasn't immediately obvious if there was a valid use-case for the
existing code for usb_id in isolation, however discussing further, we
concluded that usb_id, usb_vbus or (usb_id | usb_vbus) are valid
combinations as an external IC may be responsible for usb_id or usb_vbus.

Expand the definition with anyOf to capture the three different valid
modes.

Fixes: 4fcdd677c4ea ("bindings: pm8941-misc: Add support for VBUS detection")
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
index 6a9c96f0352ac..1bc412a4ac5e6 100644
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -27,10 +27,14 @@ properties:
 
   interrupt-names:
     minItems: 1
-    items:
-      - const: usb_id
-      - const: usb_vbus
-
+    anyOf:
+      - items:
+          - const: usb_id
+          - const: usb_vbus
+      - items:
+          - const: usb_id
+      - items:
+          - const: usb_vbus
 required:
   - compatible
   - reg
-- 
2.34.1

[PATCH v4 2/2 RESEND] extcon: qcom-spmi: Switch to platform_get_irq_byname_optional

[Bryan O'Donoghue]

Valid configurations for the extcon interrupt declarations are

- usb_id
- usb_vbus
- (usb_id | usb_vbus)

In the case of a standalone usb_id or usb_vbus failure to find one of the
interrupts shouldn't generate a warning message. A warning is already in
place if both IRQs are missing.

Switch to using platform_get_irq_byname_optional() in order to facilitate
this behaviour.

Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/extcon/extcon-qcom-spmi-misc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
index eb02cb962b5e1..f72e90ceca53d 100644
--- a/drivers/extcon/extcon-qcom-spmi-misc.c
+++ b/drivers/extcon/extcon-qcom-spmi-misc.c
@@ -123,7 +123,7 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	info->id_irq = platform_get_irq_byname(pdev, "usb_id");
+	info->id_irq = platform_get_irq_byname_optional(pdev, "usb_id");
 	if (info->id_irq > 0) {
 		ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
 					qcom_usb_irq_handler,
@@ -136,7 +136,7 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
 		}
 	}
 
-	info->vbus_irq = platform_get_irq_byname(pdev, "usb_vbus");
+	info->vbus_irq = platform_get_irq_byname_optional(pdev, "usb_vbus");
 	if (info->vbus_irq > 0) {
 		ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
 					qcom_usb_irq_handler,
-- 
2.34.1

Re: [PATCH v4 2/2 RESEND] extcon: qcom-spmi: Switch to platform_get_irq_byname_optional

[Marijn Suijten]

On 2022-12-28 13:30:58, Bryan O'Donoghue wrote:
> Valid configurations for the extcon interrupt declarations are
> 
> - usb_id
> - usb_vbus
> - (usb_id | usb_vbus)
> 
> In the case of a standalone usb_id or usb_vbus failure to find one of the
> interrupts shouldn't generate a warning message. A warning is already in
> place if both IRQs are missing.
> 
> Switch to using platform_get_irq_byname_optional() in order to facilitate
> this behaviour.
> 
> Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>

> ---
>  drivers/extcon/extcon-qcom-spmi-misc.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
> index eb02cb962b5e1..f72e90ceca53d 100644
> --- a/drivers/extcon/extcon-qcom-spmi-misc.c
> +++ b/drivers/extcon/extcon-qcom-spmi-misc.c
> @@ -123,7 +123,7 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	info->id_irq = platform_get_irq_byname(pdev, "usb_id");
> +	info->id_irq = platform_get_irq_byname_optional(pdev, "usb_id");
>  	if (info->id_irq > 0) {
>  		ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
>  					qcom_usb_irq_handler,
> @@ -136,7 +136,7 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> -	info->vbus_irq = platform_get_irq_byname(pdev, "usb_vbus");
> +	info->vbus_irq = platform_get_irq_byname_optional(pdev, "usb_vbus");
>  	if (info->vbus_irq > 0) {
>  		ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
>  					qcom_usb_irq_handler,
> -- 
> 2.34.1
> 

Re: [PATCH v4 1/2 RESEND] dt-bindings: pm8941-misc: Fix usb_id and usb_vbus definitions

[Chanwoo Choi]

On 22. 12. 28. 22:30, Bryan O'Donoghue wrote:
> dts validation is throwing an error for me on 8916 and 8939 with
> extcon@1300. In that case we have usb_vbus but not usb_id.
> 
> It wasn't immediately obvious if there was a valid use-case for the
> existing code for usb_id in isolation, however discussing further, we
> concluded that usb_id, usb_vbus or (usb_id | usb_vbus) are valid
> combinations as an external IC may be responsible for usb_id or usb_vbus.
> 
> Expand the definition with anyOf to capture the three different valid
> modes.
> 
> Fixes: 4fcdd677c4ea ("bindings: pm8941-misc: Add support for VBUS detection")
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  .../devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> index 6a9c96f0352ac..1bc412a4ac5e6 100644
> --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> @@ -27,10 +27,14 @@ properties:
>  
>    interrupt-names:
>      minItems: 1
> -    items:
> -      - const: usb_id
> -      - const: usb_vbus
> -
> +    anyOf:
> +      - items:
> +          - const: usb_id
> +          - const: usb_vbus
> +      - items:
> +          - const: usb_id
> +      - items:
> +          - const: usb_vbus
>  required:
>    - compatible
>    - reg

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: [PATCH v4 2/2 RESEND] extcon: qcom-spmi: Switch to platform_get_irq_byname_optional

[Chanwoo Choi]

On 22. 12. 28. 22:30, Bryan O'Donoghue wrote:
> Valid configurations for the extcon interrupt declarations are
> 
> - usb_id
> - usb_vbus
> - (usb_id | usb_vbus)
> 
> In the case of a standalone usb_id or usb_vbus failure to find one of the
> interrupts shouldn't generate a warning message. A warning is already in
> place if both IRQs are missing.
> 
> Switch to using platform_get_irq_byname_optional() in order to facilitate
> this behaviour.
> 
> Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  drivers/extcon/extcon-qcom-spmi-misc.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
> index eb02cb962b5e1..f72e90ceca53d 100644
> --- a/drivers/extcon/extcon-qcom-spmi-misc.c
> +++ b/drivers/extcon/extcon-qcom-spmi-misc.c
> @@ -123,7 +123,7 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	info->id_irq = platform_get_irq_byname(pdev, "usb_id");
> +	info->id_irq = platform_get_irq_byname_optional(pdev, "usb_id");
>  	if (info->id_irq > 0) {
>  		ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
>  					qcom_usb_irq_handler,
> @@ -136,7 +136,7 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> -	info->vbus_irq = platform_get_irq_byname(pdev, "usb_vbus");
> +	info->vbus_irq = platform_get_irq_byname_optional(pdev, "usb_vbus");
>  	if (info->vbus_irq > 0) {
>  		ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
>  					qcom_usb_irq_handler,

Applied it. Thanks.

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: [PATCH v4 1/2 RESEND] dt-bindings: pm8941-misc: Fix usb_id and usb_vbus definitions

[Chanwoo Choi]

On 22. 12. 28. 22:30, Bryan O'Donoghue wrote:
> dts validation is throwing an error for me on 8916 and 8939 with
> extcon@1300. In that case we have usb_vbus but not usb_id.
> 
> It wasn't immediately obvious if there was a valid use-case for the
> existing code for usb_id in isolation, however discussing further, we
> concluded that usb_id, usb_vbus or (usb_id | usb_vbus) are valid
> combinations as an external IC may be responsible for usb_id or usb_vbus.
> 
> Expand the definition with anyOf to capture the three different valid
> modes.
> 
> Fixes: 4fcdd677c4ea ("bindings: pm8941-misc: Add support for VBUS detection")
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  .../devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> index 6a9c96f0352ac..1bc412a4ac5e6 100644
> --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> @@ -27,10 +27,14 @@ properties:
>  
>    interrupt-names:
>      minItems: 1
> -    items:
> -      - const: usb_id
> -      - const: usb_vbus
> -
> +    anyOf:
> +      - items:
> +          - const: usb_id
> +          - const: usb_vbus
> +      - items:
> +          - const: usb_id
> +      - items:
> +          - const: usb_vbus
>  required:
>    - compatible
>    - reg

Applied it. Thanks
-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: [PATCH v4 0/2 RESEND] Fix pm8941-misc extcon interrupt dependency assumptions

[Bryan O'Donoghue]

On 22/11/2022 20:15, Luca Weiss wrote:
> On Montag, 26. September 2022 13:31:41 CET Bryan O'Donoghue wrote:
>> RESEND:
>> - I thought I resent these at the start of this month, can't find them
>>    in linux-msm I think I just sent them to myself.
>>
>>    No change since July 17th
>>
>> V4:
>> - Added suggested extra log text from Marjin to extcon patch
>>
>> V3:
>> - Adds a cover-letter since we are now doing two patches a dt-bindings fix
>> and platform_get_irq_byname_optional fix.
>> - Add Review-by -> Rob Herring, Marijn Suijten
>> - Add additional patch to negate warning when one of usb_id or usb_vbus
>>    is not declared in the platform DTS.
>>
>> Bryan O'Donoghue (2):
>>    dt-bindings: pm8941-misc: Fix usb_id and usb_vbus definitions
>>    extcon: qcom-spmi: Switch to platform_get_irq_byname_optional
>>
>>   .../devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 12 ++++++++----
>>   drivers/extcon/extcon-qcom-spmi-misc.c               |  4 ++--
>>   2 files changed, 10 insertions(+), 6 deletions(-)
> 
> Hi Chanwoo Cho  and MyungJoo Ham,
> 
> could you please pick up these patches?
> 
> Regards
> Luca
> 
> 
Thanks for bumping this Luca.

I was about to do just that.

Chanwoo - would appreciate merging this, its an annoying and very old 
dts splat for us.

---
bod

Re: [PATCH v4 0/2 RESEND] Fix pm8941-misc extcon interrupt dependency assumptions

[Luca Weiss]

On Montag, 26. September 2022 13:31:41 CET Bryan O'Donoghue wrote:
> RESEND:
> - I thought I resent these at the start of this month, can't find them
>   in linux-msm I think I just sent them to myself.
> 
>   No change since July 17th
> 
> V4:
> - Added suggested extra log text from Marjin to extcon patch
> 
> V3:
> - Adds a cover-letter since we are now doing two patches a dt-bindings fix
> and platform_get_irq_byname_optional fix.
> - Add Review-by -> Rob Herring, Marijn Suijten
> - Add additional patch to negate warning when one of usb_id or usb_vbus
>   is not declared in the platform DTS.
> 
> Bryan O'Donoghue (2):
>   dt-bindings: pm8941-misc: Fix usb_id and usb_vbus definitions
>   extcon: qcom-spmi: Switch to platform_get_irq_byname_optional
> 
>  .../devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 12 ++++++++----
>  drivers/extcon/extcon-qcom-spmi-misc.c               |  4 ++--
>  2 files changed, 10 insertions(+), 6 deletions(-)

Hi Chanwoo Cho  and MyungJoo Ham,

could you please pick up these patches?

Regards
Luca

Re: [PATCH v4 0/2 RESEND] Fix pm8941-misc extcon interrupt dependency assumptions

[Marijn Suijten]

(Whoops, I didn't get CC'd in the cover letter - downloaded it from the
lists)

On 2022-09-26 12:31:41, Bryan O'Donoghue wrote:
> RESEND:
> - I thought I resent these at the start of this month, can't find them
>   in linux-msm I think I just sent them to myself.

It seems it made it to the lists successfully - there's a v4 RESEND from
the 8th: https://lore.kernel.org/linux-arm-msm/20220908112556.860343-1-bryan.odonoghue@linaro.org/

>   No change since July 17th
> 
> V4:
> - Added suggested extra log text from Marjin to extcon patch

MarIJn*, thanks :)

- Marijn

> V3:
> - Adds a cover-letter since we are now doing two patches a dt-bindings fix and
>   platform_get_irq_byname_optional fix.
> - Add Review-by -> Rob Herring, Marijn Suijten
> - Add additional patch to negate warning when one of usb_id or usb_vbus
>   is not declared in the platform DTS.
> 
> Bryan O'Donoghue (2):
>   dt-bindings: pm8941-misc: Fix usb_id and usb_vbus definitions
>   extcon: qcom-spmi: Switch to platform_get_irq_byname_optional
> 
>  .../devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 12 ++++++++----
>  drivers/extcon/extcon-qcom-spmi-misc.c               |  4 ++--
>  2 files changed, 10 insertions(+), 6 deletions(-)
> 
> -- 
> 2.36.1
> 

[PATCH v4 0/2 RESEND] Fix pm8941-misc extcon interrupt dependency assumptions

[Bryan O'Donoghue]

RESEND:
- I thought I resent these at the start of this month, can't find them
  in linux-msm I think I just sent them to myself.

  No change since July 17th

V4:
- Added suggested extra log text from Marjin to extcon patch

V3:
- Adds a cover-letter since we are now doing two patches a dt-bindings fix and
  platform_get_irq_byname_optional fix.
- Add Review-by -> Rob Herring, Marijn Suijten
- Add additional patch to negate warning when one of usb_id or usb_vbus
  is not declared in the platform DTS.

Bryan O'Donoghue (2):
  dt-bindings: pm8941-misc: Fix usb_id and usb_vbus definitions
  extcon: qcom-spmi: Switch to platform_get_irq_byname_optional

 .../devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 12 ++++++++----
 drivers/extcon/extcon-qcom-spmi-misc.c               |  4 ++--
 2 files changed, 10 insertions(+), 6 deletions(-)

-- 
2.36.1

[PATCH v4 0/2 RESEND] Fix pm8941-misc extcon interrupt dependency assumptions

[Bryan O'Donoghue]

V4:
- Added suggested extra log text from Marjin to extcon patch

V3:
- Adds a cover-letter since we are now doing two patches a dt-bindings fix and
  platform_get_irq_byname_optional fix.
- Add Review-by -> Rob Herring, Marijn Suijten
- Add additional patch to negate warning when one of usb_id or usb_vbus
  is not declared in the platform DTS.

Bryan O'Donoghue (2):
  dt-bindings: pm8941-misc: Fix usb_id and usb_vbus definitions
  extcon: qcom-spmi: Switch to platform_get_irq_byname_optional

 .../devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 12 ++++++++----
 drivers/extcon/extcon-qcom-spmi-misc.c               |  4 ++--
 2 files changed, 10 insertions(+), 6 deletions(-)

-- 
2.36.1