[PATCH v2 00/17] Misc DT style fixes

[PATCH v2 00/17] Misc DT style fixes

[Konrad Dybcio]

As part of trying to write up everything we care about when reviewing
DTs [1], I put my regex to a test and removed some reg inconsistencies,
among fixing up some other things in ipq6018.

v1 available at [2].

No dependencies as far as I'm aware.

[1] https://github.com/konradybcio-work/dt_review
[2] https://lore.kernel.org/linux-arm-msm/51875ab4-b0af-466a-cf27-d3bed65a94c5@linaro.org/T/#mc791099fac8349db446468ee873e0953e58a8246

Konrad Dybcio (17):
  arm64: dts: qcom: ipq6018: Pad addresses to 8 hex digits
  arm64: dts: qcom: ipq6018: Fix up indentation
  arm64: dts: qcom: ipq6018: Sort nodes properly
  arm64: dts: qcom: ipq6018: Add/remove some newlines
  arm64: dts: qcom: ipq6018: Use lowercase hex
  arm64: dts: qcom: sc8280xp: Pad addresses to 8 hex digits
  arm64: dts: qcom: sm8150: Pad addresses to 8 hex digits
  arm64: dts: qcom: sm6350: Pad addresses to 8 hex digits
  arm64: dts: qcom: sdm845: Pad addresses to 8 hex digits
  arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits
  arm64: dts: qcom: sm8350: Pad addresses to 8 hex digits
  arm64: dts: qcom: sc7180: Pad addresses to 8 hex digits
  arm64: dts: qcom: sc7280: Pad addresses to 8 hex digits
  arm64: dts: qcom: msm8994-octagon: Pad addresses to 8 hex digits
  arm64: dts: qcom: sm8450: Pad addresses to 8 hex digits
  arm64: dts: qcom: msm8994-kitakami: Pad addresses to 8 hex digits
  arm64: dts: qcom: sm6115: Pad addresses to 8 hex digits

 arch/arm64/boot/dts/qcom/ipq6018.dtsi         | 548 +++++++++---------
 .../dts/qcom/msm8994-msft-lumia-octagon.dtsi  |  52 +-
 .../qcom/msm8994-sony-xperia-kitakami.dtsi    |   2 +-
 arch/arm64/boot/dts/qcom/sc7180.dtsi          |  20 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi          |  46 +-
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        |   2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  46 +-
 arch/arm64/boot/dts/qcom/sm6115.dtsi          |   6 +-
 arch/arm64/boot/dts/qcom/sm6350.dtsi          |  16 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi          |  68 +--
 arch/arm64/boot/dts/qcom/sm8250.dtsi          |  54 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi          |  16 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |  48 +-
 13 files changed, 461 insertions(+), 463 deletions(-)

-- 
2.39.0

[PATCH v2 01/17] arm64: dts: qcom: ipq6018: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
- Remove stray duplicated usb node

 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 2ceae73a6069..6f12c1a8f90f 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -146,7 +146,7 @@ reserved-memory {
 		ranges;
 
 		rpm_msg_ram: memory@60000 {
-			reg = <0x0 0x60000 0x0 0x6000>;
+			reg = <0x0 0x00060000 0x0 0x6000>;
 			no-map;
 		};
 
@@ -181,7 +181,7 @@ soc: soc {
 
 		prng: qrng@e1000 {
 			compatible = "qcom,prng-ee";
-			reg = <0x0 0xe3000 0x0 0x1000>;
+			reg = <0x0 0x000e3000 0x0 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
@@ -388,7 +388,7 @@ v2m@0 {
 
 		pcie_phy: phy@84000 {
 			compatible = "qcom,ipq6018-qmp-pcie-phy";
-			reg = <0x0 0x84000 0x0 0x1bc>; /* Serdes PLL */
+			reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -404,10 +404,10 @@ pcie_phy: phy@84000 {
 				      "common";
 
 			pcie_phy0: phy@84200 {
-				reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
-				      <0x0 0x84400 0x0 0x200>, /* Serdes Rx */
-				      <0x0 0x84800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
-				      <0x0 0x84c00 0x0 0xf4>; /* pcs_misc */
+				reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
+				      <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
+				      <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
 				#phy-cells = <0>;
 
 				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
@@ -623,7 +623,7 @@ mdio: mdio@90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
-			reg = <0x0 0x90000 0x0 0x64>;
+			reg = <0x0 0x00090000 0x0 0x64>;
 			clocks = <&gcc GCC_MDIO_AHB_CLK>;
 			clock-names = "gcc_mdio_ahb_clk";
 			status = "disabled";
@@ -631,7 +631,7 @@ mdio: mdio@90000 {
 
 		qusb_phy_1: qusb@59000 {
 			compatible = "qcom,ipq6018-qusb2-phy";
-			reg = <0x0 0x059000 0x0 0x180>;
+			reg = <0x0 0x00059000 0x0 0x180>;
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
@@ -664,7 +664,7 @@ usb2: usb@70f8800 {
 
 			dwc_1: usb@7000000 {
 			       compatible = "snps,dwc3";
-			       reg = <0x0 0x7000000 0x0 0xcd00>;
+			       reg = <0x0 0x07000000 0x0 0xcd00>;
 			       interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 			       phys = <&qusb_phy_1>;
 			       phy-names = "usb2-phy";
@@ -679,7 +679,7 @@ dwc_1: usb@7000000 {
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x78000 0x0 0x1c4>;
+			reg = <0x0 0x00078000 0x0 0x1c4>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -708,7 +708,7 @@ usb0_ssphy: phy@78200 {
 
 		qusb_phy_0: qusb@79000 {
 			compatible = "qcom,ipq6018-qusb2-phy";
-			reg = <0x0 0x079000 0x0 0x180>;
+			reg = <0x0 0x00079000 0x0 0x180>;
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-- 
2.39.0

[PATCH v2 02/17] arm64: dts: qcom: ipq6018: Fix up indentation

[Konrad Dybcio]

The dwc3 subnode was indented using spaces for some reason and other
properties were not exactly properly indented. Fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
- Squash with a similar indent-fixing patch [4/18]

 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 44 +++++++++++++--------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 6f12c1a8f90f..d1c02efc2ea9 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -201,8 +201,8 @@ crypto: crypto@73a000 {
 			compatible = "qcom,crypto-v5.1";
 			reg = <0x0 0x0073a000 0x0 0x6000>;
 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
-				<&gcc GCC_CRYPTO_AXI_CLK>,
-				<&gcc GCC_CRYPTO_CLK>;
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
 			clock-names = "iface", "bus", "core";
 			dmas = <&cryptobam 2>, <&cryptobam 3>;
 			dma-names = "rx", "tx";
@@ -272,7 +272,7 @@ blsp1_uart3: serial@78b1000 {
 			reg = <0x0 0x078b1000 0x0 0x200>;
 			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
 		};
@@ -285,7 +285,7 @@ blsp1_spi1: spi@78b5000 {
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			spi-max-frequency = <50000000>;
 			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
 			dma-names = "tx", "rx";
@@ -300,7 +300,7 @@ blsp1_spi2: spi@78b6000 {
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			spi-max-frequency = <50000000>;
 			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
 			dma-names = "tx", "rx";
@@ -358,8 +358,8 @@ qpic_nand: nand-controller@79b0000 {
 			clock-names = "core", "aon";
 
 			dmas = <&qpic_bam 0>,
-				<&qpic_bam 1>,
-				<&qpic_bam 2>;
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
 			dma-names = "tx", "rx", "cmd";
 			pinctrl-0 = <&qpic_pins>;
 			pinctrl-names = "default";
@@ -372,10 +372,10 @@ intc: interrupt-controller@b000000 {
 			#size-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <0x3>;
-			reg =   <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
-				<0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
-				<0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
-				<0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
+			reg = <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
+			      <0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
+			      <0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
+			      <0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			ranges = <0 0 0 0xb00a000 0 0xffd>;
 
@@ -663,17 +663,17 @@ usb2: usb@70f8800 {
 			status = "disabled";
 
 			dwc_1: usb@7000000 {
-			       compatible = "snps,dwc3";
-			       reg = <0x0 0x07000000 0x0 0xcd00>;
-			       interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			       phys = <&qusb_phy_1>;
-			       phy-names = "usb2-phy";
-			       tx-fifo-resize;
-			       snps,is-utmi-l1-suspend;
-			       snps,hird-threshold = /bits/ 8 <0x0>;
-			       snps,dis_u2_susphy_quirk;
-			       snps,dis_u3_susphy_quirk;
-			       dr_mode = "host";
+				compatible = "snps,dwc3";
+				reg = <0x0 0x07000000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
 			};
 		};
 
-- 
2.39.0

[PATCH v2 03/17] arm64: dts: qcom: ipq6018: Sort nodes properly

[Konrad Dybcio]

Order nodes by unit address if one exists and alphabetically otherwise.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 562 +++++++++++++-------------
 1 file changed, 281 insertions(+), 281 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index d1c02efc2ea9..8937b10748f3 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -87,6 +87,12 @@ L2_0: l2-cache {
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq6018", "qcom,scm";
+		};
+	};
+
 	cpu_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
@@ -123,12 +129,6 @@ opp-1800000000 {
 		};
 	};
 
-	firmware {
-		scm {
-			compatible = "qcom,scm-ipq6018", "qcom,scm";
-		};
-	};
-
 	pmuv8: pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
@@ -166,6 +166,28 @@ q6_region: memory@4ab00000 {
 		};
 	};
 
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: glink-channel {
+			compatible = "qcom,rpm-ipq6018";
+			qcom,glink-channels = "rpm_requests";
+
+			regulators {
+				compatible = "qcom,rpm-mp5496-regulators";
+
+				ipq6018_s2: s2 {
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1062500>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_region>;
@@ -179,6 +201,102 @@ soc: soc {
 		dma-ranges;
 		compatible = "simple-bus";
 
+		qusb_phy_1: qusb@59000 {
+			compatible = "qcom,ipq6018-qusb2-phy";
+			reg = <0x0 0x00059000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: ssphy@78000 {
+			compatible = "qcom,ipq6018-qmp-usb3-phy";
+			reg = <0x0 0x00078000 0x0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb0_ssphy: phy@78200 {
+				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
+				      <0x0 0x00078400 0x0 0x200>, /* Rx */
+				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
+				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb0_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_0: qusb@79000 {
+			compatible = "qcom,ipq6018-qusb2-phy";
+			reg = <0x0 0x00079000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		pcie_phy: phy@84000 {
+			compatible = "qcom,ipq6018-qmp-pcie-phy";
+			reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				<&gcc GCC_PCIE0_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			pcie_phy0: phy@84200 {
+				reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
+				      <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
+				      <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_pcie0_pipe_clk_src";
+				#clock-cells = <0>;
+			};
+		};
+
+		mdio: mdio@90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
+			reg = <0x0 0x00090000 0x0 0x64>;
+			clocks = <&gcc GCC_MDIO_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+			status = "disabled";
+		};
+
 		prng: qrng@e1000 {
 			compatible = "qcom,prng-ee";
 			reg = <0x0 0x000e3000 0x0 0x1000>;
@@ -257,6 +375,41 @@ tcsr: syscon@1937000 {
 			reg = <0x0 0x01937000 0x0 0x21000>;
 		};
 
+		usb2: usb@70f8800 {
+			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+			reg = <0x0 0x070F8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_USB1_MASTER_CLK>,
+				 <&gcc GCC_USB1_SLEEP_CLK>,
+				 <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <24000000>;
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: usb@7000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x07000000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
 		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07884000 0x0 0x2b000>;
@@ -366,6 +519,49 @@ qpic_nand: nand-controller@79b0000 {
 			status = "disabled";
 		};
 
+		usb3: usb@8af8800 {
+			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+			reg = <0x0 0x08af8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				"core",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <133330000>,
+					       <20000000>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x08a00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				clocks = <&xo>;
+				clock-names = "ref";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			#address-cells = <2>;
@@ -386,130 +582,29 @@ v2m@0 {
 			};
 		};
 
-		pcie_phy: phy@84000 {
-			compatible = "qcom,ipq6018-qmp-pcie-phy";
-			reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
-				<&gcc GCC_PCIE0_AHB_CLK>;
-			clock-names = "aux", "cfg_ahb";
-
-			resets = <&gcc GCC_PCIE0_PHY_BCR>,
-				<&gcc GCC_PCIE0PHY_PHY_BCR>;
-			reset-names = "phy",
-				      "common";
+		watchdog@b017000 {
+			compatible = "qcom,kpss-wdt";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x0 0x0b017000 0x0 0x40>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <10>;
+		};
 
-			pcie_phy0: phy@84200 {
-				reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
-				      <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
-				      <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
-				      <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
-				#phy-cells = <0>;
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0 0x0b111000 0x0 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo>;
+			clock-names = "pll", "xo";
+			#mbox-cells = <1>;
+		};
 
-				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_pcie0_pipe_clk_src";
-				#clock-cells = <0>;
-			};
-		};
-
-		pcie0: pci@20000000 {
-			compatible = "qcom,pcie-ipq6018";
-			reg = <0x0 0x20000000 0x0 0xf1d>,
-			      <0x0 0x20000f20 0x0 0xa8>,
-			      <0x0 0x20001000 0x0 0x1000>,
-			      <0x0 0x80000 0x0 0x4000>,
-			      <0x0 0x20100000 0x0 0x1000>;
-			reg-names = "dbi", "elbi", "atu", "parf", "config";
-
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			max-link-speed = <3>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			phys = <&pcie_phy0>;
-			phy-names = "pciephy";
-
-			ranges = <0x81000000 0 0x20200000 0 0x20200000
-				  0 0x10000>, /* downstream I/O */
-				 <0x82000000 0 0x20220000 0 0x20220000
-				  0 0xfde0000>; /* non-prefetchable memory */
-
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
-					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
-				 <&gcc GCC_PCIE0_AXI_M_CLK>,
-				 <&gcc GCC_PCIE0_AXI_S_CLK>,
-				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
-				 <&gcc PCIE0_RCHNG_CLK>;
-			clock-names = "iface",
-				      "axi_m",
-				      "axi_s",
-				      "axi_bridge",
-				      "rchng";
-
-			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
-				 <&gcc GCC_PCIE0_SLEEP_ARES>,
-				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
-				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
-				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
-				 <&gcc GCC_PCIE0_AHB_ARES>,
-				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
-				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
-			reset-names = "pipe",
-				      "sleep",
-				      "sticky",
-				      "axi_m",
-				      "axi_s",
-				      "ahb",
-				      "axi_m_sticky",
-				      "axi_s_sticky";
-
-			status = "disabled";
-		};
-
-		watchdog@b017000 {
-			compatible = "qcom,kpss-wdt";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
-			reg = <0x0 0x0b017000 0x0 0x40>;
-			clocks = <&sleep_clk>;
-			timeout-sec = <10>;
-		};
-
-		apcs_glb: mailbox@b111000 {
-			compatible = "qcom,ipq6018-apcs-apps-global";
-			reg = <0x0 0x0b111000 0x0 0x1000>;
-			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
-			#mbox-cells = <1>;
-		};
-
-		a53pll: clock@b116000 {
-			compatible = "qcom,ipq6018-a53pll";
-			reg = <0x0 0x0b116000 0x0 0x40>;
-			#clock-cells = <0>;
-			clocks = <&xo>;
-			clock-names = "xo";
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq6018-a53pll";
+			reg = <0x0 0x0b116000 0x0 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo>;
+			clock-names = "xo";
 		};
 
 		timer@b120000 {
@@ -619,147 +714,74 @@ qrtr_requests {
 			};
 		};
 
-		mdio: mdio@90000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
-			reg = <0x0 0x00090000 0x0 0x64>;
-			clocks = <&gcc GCC_MDIO_AHB_CLK>;
-			clock-names = "gcc_mdio_ahb_clk";
-			status = "disabled";
-		};
-
-		qusb_phy_1: qusb@59000 {
-			compatible = "qcom,ipq6018-qusb2-phy";
-			reg = <0x0 0x00059000 0x0 0x180>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
-				 <&xo>;
-			clock-names = "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
-			status = "disabled";
-		};
-
-		usb2: usb@70f8800 {
-			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
-			reg = <0x0 0x070F8800 0x0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clocks = <&gcc GCC_USB1_MASTER_CLK>,
-				 <&gcc GCC_USB1_SLEEP_CLK>,
-				 <&gcc GCC_USB1_MOCK_UTMI_CLK>;
-			clock-names = "core",
-				      "sleep",
-				      "mock_utmi";
-
-			assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
-					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
-			assigned-clock-rates = <133330000>,
-					       <24000000>;
-			resets = <&gcc GCC_USB1_BCR>;
-			status = "disabled";
-
-			dwc_1: usb@7000000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x07000000 0x0 0xcd00>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_1>;
-				phy-names = "usb2-phy";
-				tx-fifo-resize;
-				snps,is-utmi-l1-suspend;
-				snps,hird-threshold = /bits/ 8 <0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_u3_susphy_quirk;
-				dr_mode = "host";
-			};
-		};
+		pcie0: pci@20000000 {
+			compatible = "qcom,pcie-ipq6018";
+			reg = <0x0 0x20000000 0x0 0xf1d>,
+			      <0x0 0x20000f20 0x0 0xa8>,
+			      <0x0 0x20001000 0x0 0x1000>,
+			      <0x0 0x80000 0x0 0x4000>,
+			      <0x0 0x20100000 0x0 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
 
-		ssphy_0: ssphy@78000 {
-			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x00078000 0x0 0x1c4>;
-			#address-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			max-link-speed = <3>;
+			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges;
-
-			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB0_PHY_BCR>,
-				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
-
-			usb0_ssphy: phy@78200 {
-				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
-				      <0x0 0x00078400 0x0 0x200>, /* Rx */
-				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
-				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
-			};
-		};
 
-		qusb_phy_0: qusb@79000 {
-			compatible = "qcom,ipq6018-qusb2-phy";
-			reg = <0x0 0x00079000 0x0 0x180>;
-			#phy-cells = <0>;
+			phys = <&pcie_phy0>;
+			phy-names = "pciephy";
 
-			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "cfg_ahb", "ref";
+			ranges = <0x81000000 0 0x20200000 0 0x20200000
+				  0 0x10000>, /* downstream I/O */
+				 <0x82000000 0 0x20220000 0 0x20220000
+				  0 0xfde0000>; /* non-prefetchable memory */
 
-			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
-			status = "disabled";
-		};
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
 
-		usb3: usb@8af8800 {
-			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
-			reg = <0x0 0x8af8800 0x0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 75
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 78
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 79
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 83
+					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
-			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
-				<&gcc GCC_USB0_MASTER_CLK>,
-				<&gcc GCC_USB0_SLEEP_CLK>,
-				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc",
-				"core",
-				"sleep",
-				"mock_utmi";
+			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+				 <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc PCIE0_RCHNG_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng";
 
-			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
-					  <&gcc GCC_USB0_MASTER_CLK>,
-					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
-			assigned-clock-rates = <133330000>,
-					       <133330000>,
-					       <20000000>;
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_SLEEP_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
 
-			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
-
-			dwc_0: usb@8a00000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x8a00000 0x0 0xcd00>;
-				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				clocks = <&xo>;
-				clock-names = "ref";
-				tx-fifo-resize;
-				snps,is-utmi-l1-suspend;
-				snps,hird-threshold = /bits/ 8 <0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_u3_susphy_quirk;
-				dr_mode = "host";
-			};
 		};
 	};
 
@@ -794,26 +816,4 @@ wcss_smp2p_in: slave-kernel {
 			#interrupt-cells = <2>;
 		};
 	};
-
-	rpm-glink {
-		compatible = "qcom,glink-rpm";
-		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-		mboxes = <&apcs_glb 0>;
-
-		rpm_requests: glink-channel {
-			compatible = "qcom,rpm-ipq6018";
-			qcom,glink-channels = "rpm_requests";
-
-			regulators {
-				compatible = "qcom,rpm-mp5496-regulators";
-
-				ipq6018_s2: s2 {
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1062500>;
-					regulator-always-on;
-				};
-			};
-		};
-	};
 };
-- 
2.39.0

[PATCH v2 04/17] arm64: dts: qcom: ipq6018: Add/remove some newlines

[Konrad Dybcio]

Some lines were broken very aggresively, presumably to fit under 80 chars
and some places could have used a newline, particularly between subsequent
nodes. Address all that and remove redundant comments near PCIe ranges
while at it so as not to exceed 100 chars needlessly.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 8937b10748f3..0d9074b3b1a2 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -102,26 +102,31 @@ opp-864000000 {
 			opp-microvolt = <725000>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
@@ -131,8 +136,7 @@ opp-1800000000 {
 
 	pmuv8: pmu {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
-					 IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	psci: psci {
@@ -734,24 +738,18 @@ pcie0: pci@20000000 {
 			phys = <&pcie_phy0>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x20200000 0 0x20200000
-				  0 0x10000>, /* downstream I/O */
-				 <0x82000000 0 0x20220000 0 0x20220000
-				  0 0xfde0000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>,
+				 <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>;
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
-					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
-- 
2.39.0

[PATCH v2 05/17] arm64: dts: qcom: ipq6018: Use lowercase hex

[Konrad Dybcio]

One value escaped my previous lowercase hexification. Take care of it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 0d9074b3b1a2..d32c9b2515ee 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -381,7 +381,7 @@ tcsr: syscon@1937000 {
 
 		usb2: usb@70f8800 {
 			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
-			reg = <0x0 0x070F8800 0x0 0x400>;
+			reg = <0x0 0x070f8800 0x0 0x400>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
-- 
2.39.0

[PATCH v2 06/17] arm64: dts: qcom: sc8280xp: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 109c9d2b684d..a359ced4b6b4 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1765,7 +1765,7 @@ usb_1_ssphy: usb3-phy@8903400 {
 
 		pmu@9091000 {
 			compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
-			reg = <0 0x9091000 0 0x1000>;
+			reg = <0 0x09091000 0 0x1000>;
 
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 
-- 
2.39.0

[PATCH v2 07/17] arm64: dts: qcom: sm8150: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sm8150.dtsi | 68 ++++++++++++++--------------
 1 file changed, 34 insertions(+), 34 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 73f39bbeab13..f6b16c31e8b0 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -890,7 +890,7 @@ gcc: clock-controller@100000 {
 
 		gpi_dma0: dma-controller@800000 {
 			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
-			reg = <0 0x800000 0 0x60000>;
+			reg = <0 0x00800000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -979,7 +979,7 @@ i2c0: i2c@880000 {
 
 			spi0: spi@880000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x880000 0 0x4000>;
+				reg = <0 0x00880000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
@@ -1013,7 +1013,7 @@ i2c1: i2c@884000 {
 
 			spi1: spi@884000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x884000 0 0x4000>;
+				reg = <0 0x00884000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
@@ -1047,7 +1047,7 @@ i2c2: i2c@888000 {
 
 			spi2: spi@888000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x888000 0 0x4000>;
+				reg = <0 0x00888000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
@@ -1081,7 +1081,7 @@ i2c3: i2c@88c000 {
 
 			spi3: spi@88c000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x88c000 0 0x4000>;
+				reg = <0 0x0088c000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
@@ -1115,7 +1115,7 @@ i2c4: i2c@890000 {
 
 			spi4: spi@890000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x890000 0 0x4000>;
+				reg = <0 0x00890000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
@@ -1149,7 +1149,7 @@ i2c5: i2c@894000 {
 
 			spi5: spi@894000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x894000 0 0x4000>;
+				reg = <0 0x00894000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
@@ -1183,7 +1183,7 @@ i2c6: i2c@898000 {
 
 			spi6: spi@898000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x898000 0 0x4000>;
+				reg = <0 0x00898000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
@@ -1217,7 +1217,7 @@ i2c7: i2c@89c000 {
 
 			spi7: spi@89c000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x89c000 0 0x4000>;
+				reg = <0 0x0089c000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
@@ -1236,7 +1236,7 @@ spi7: spi@89c000 {
 
 		gpi_dma1: dma-controller@a00000 {
 			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
-			reg = <0 0xa00000 0 0x60000>;
+			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
@@ -1287,7 +1287,7 @@ i2c8: i2c@a80000 {
 
 			spi8: spi@a80000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa80000 0 0x4000>;
+				reg = <0 0x00a80000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
@@ -1321,7 +1321,7 @@ i2c9: i2c@a84000 {
 
 			spi9: spi@a84000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa84000 0 0x4000>;
+				reg = <0 0x00a84000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
@@ -1355,7 +1355,7 @@ i2c10: i2c@a88000 {
 
 			spi10: spi@a88000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa88000 0 0x4000>;
+				reg = <0 0x00a88000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
@@ -1389,7 +1389,7 @@ i2c11: i2c@a8c000 {
 
 			spi11: spi@a8c000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa8c000 0 0x4000>;
+				reg = <0 0x00a8c000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
@@ -1432,7 +1432,7 @@ i2c12: i2c@a90000 {
 
 			spi12: spi@a90000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa90000 0 0x4000>;
+				reg = <0 0x00a90000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
@@ -1450,7 +1450,7 @@ spi12: spi@a90000 {
 
 			i2c16: i2c@94000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x0094000 0 0x4000>;
+				reg = <0 0x00094000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
@@ -1466,7 +1466,7 @@ i2c16: i2c@94000 {
 
 			spi16: spi@a94000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa94000 0 0x4000>;
+				reg = <0 0x00a94000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
@@ -1485,7 +1485,7 @@ spi16: spi@a94000 {
 
 		gpi_dma2: dma-controller@c00000 {
 			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
-			reg = <0 0xc00000 0 0x60000>;
+			reg = <0 0x00c00000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
@@ -1537,7 +1537,7 @@ i2c17: i2c@c80000 {
 
 			spi17: spi@c80000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc80000 0 0x4000>;
+				reg = <0 0x00c80000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
@@ -1571,7 +1571,7 @@ i2c18: i2c@c84000 {
 
 			spi18: spi@c84000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc84000 0 0x4000>;
+				reg = <0 0x00c84000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
@@ -1605,7 +1605,7 @@ i2c19: i2c@c88000 {
 
 			spi19: spi@c88000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc88000 0 0x4000>;
+				reg = <0 0x00c88000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
@@ -1639,7 +1639,7 @@ i2c13: i2c@c8c000 {
 
 			spi13: spi@c8c000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc8c000 0 0x4000>;
+				reg = <0 0x00c8c000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
@@ -1673,7 +1673,7 @@ i2c14: i2c@c90000 {
 
 			spi14: spi@c90000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc90000 0 0x4000>;
+				reg = <0 0x00c90000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
@@ -1707,7 +1707,7 @@ i2c15: i2c@c94000 {
 
 			spi15: spi@c94000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc94000 0 0x4000>;
+				reg = <0 0x00c94000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
@@ -1864,10 +1864,10 @@ pcie0_phy: phy@1c06000 {
 			status = "disabled";
 
 			pcie0_lane: phy@1c06200 {
-				reg = <0 0x1c06200 0 0x170>, /* tx */
-				      <0 0x1c06400 0 0x200>, /* rx */
-				      <0 0x1c06800 0 0x1f0>, /* pcs */
-				      <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+				reg = <0 0x01c06200 0 0x170>, /* tx */
+				      <0 0x01c06400 0 0x200>, /* rx */
+				      <0 0x01c06800 0 0x1f0>, /* pcs */
+				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -1963,12 +1963,12 @@ pcie1_phy: phy@1c0e000 {
 			status = "disabled";
 
 			pcie1_lane: phy@1c0e200 {
-				reg = <0 0x1c0e200 0 0x170>, /* tx0 */
-				      <0 0x1c0e400 0 0x200>, /* rx0 */
-				      <0 0x1c0ea00 0 0x1f0>, /* pcs */
-				      <0 0x1c0e600 0 0x170>, /* tx1 */
-				      <0 0x1c0e800 0 0x200>, /* rx1 */
-				      <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
+				      <0 0x01c0e400 0 0x200>, /* rx0 */
+				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
+				      <0 0x01c0e600 0 0x170>, /* tx1 */
+				      <0 0x01c0e800 0 0x200>, /* rx1 */
+				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
 				clock-names = "pipe0";
 
-- 
2.39.0

[PATCH v2 08/17] arm64: dts: qcom: sm6350: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sm6350.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 8944dcbbe3a2..e71ffc31d41e 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -557,7 +557,7 @@ gpi_dma0: dma-controller@800000 {
 
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
-			reg = <0x0 0x8c0000 0x0 0x2000>;
+			reg = <0x0 0x008c0000 0x0 0x2000>;
 			clock-names = "m-ahb", "s-ahb";
 			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
@@ -630,7 +630,7 @@ gpi_dma1: dma-controller@900000 {
 
 		qupv3_id_1: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
-			reg = <0x0 0x9c0000 0x0 0x2000>;
+			reg = <0x0 0x009c0000 0x0 0x2000>;
 			clock-names = "m-ahb", "s-ahb";
 			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
@@ -702,7 +702,7 @@ i2c8: i2c@988000 {
 
 			uart9: serial@98c000 {
 				compatible = "qcom,geni-debug-uart";
-				reg = <0 0x98c000 0 0x4000>;
+				reg = <0 0x0098c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				pinctrl-names = "default";
@@ -1654,11 +1654,11 @@ aoss_qmp: power-controller@c300000 {
 
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg = <0 0xc440000 0 0x1100>,
-			      <0 0xc600000 0 0x2000000>,
-			      <0 0xe600000 0 0x100000>,
-			      <0 0xe700000 0 0xa0000>,
-			      <0 0xc40a000 0 0x26000>;
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.39.0

[PATCH v2 09/17] arm64: dts: qcom: sdm845: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 46 ++++++++++++++--------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 154f5054a200..44bb3509df62 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2585,9 +2585,9 @@ ipa: ipa@1e40000 {
 
 			iommus = <&apps_smmu 0x720 0x0>,
 				 <&apps_smmu 0x722 0x0>;
-			reg = <0 0x1e40000 0 0x7000>,
-			      <0 0x1e47000 0 0x2000>,
-			      <0 0x1e04000 0 0x2c000>;
+			reg = <0 0x01e40000 0 0x7000>,
+			      <0 0x01e47000 0 0x2000>,
+			      <0 0x01e04000 0 0x2c000>;
 			reg-names = "ipa-reg",
 				    "ipa-shared",
 				    "gsi";
@@ -4237,16 +4237,16 @@ videocc: clock-controller@ab00000 {
 		camss: camss@a00000 {
 			compatible = "qcom,sdm845-camss";
 
-			reg = <0 0xacb3000 0 0x1000>,
-				<0 0xacba000 0 0x1000>,
-				<0 0xacc8000 0 0x1000>,
-				<0 0xac65000 0 0x1000>,
-				<0 0xac66000 0 0x1000>,
-				<0 0xac67000 0 0x1000>,
-				<0 0xac68000 0 0x1000>,
-				<0 0xacaf000 0 0x4000>,
-				<0 0xacb6000 0 0x4000>,
-				<0 0xacc4000 0 0x4000>;
+			reg = <0 0x0acb3000 0 0x1000>,
+				<0 0x0acba000 0 0x1000>,
+				<0 0x0acc8000 0 0x1000>,
+				<0 0x0ac65000 0 0x1000>,
+				<0 0x0ac66000 0 0x1000>,
+				<0 0x0ac67000 0 0x1000>,
+				<0 0x0ac68000 0 0x1000>,
+				<0 0x0acaf000 0 0x4000>,
+				<0 0x0acb6000 0 0x4000>,
+				<0 0x0acc4000 0 0x4000>;
 			reg-names = "csid0",
 				"csid1",
 				"csid2",
@@ -4575,11 +4575,11 @@ mdss_dp: displayport-controller@ae90000 {
 				status = "disabled";
 				compatible = "qcom,sdm845-dp";
 
-				reg = <0 0xae90000 0 0x200>,
-				      <0 0xae90200 0 0x200>,
-				      <0 0xae90400 0 0x600>,
-				      <0 0xae90a00 0 0x600>,
-				      <0 0xae91000 0 0x600>;
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0x600>,
+				      <0 0x0ae90a00 0 0x600>,
+				      <0 0x0ae91000 0 0x600>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <12>;
@@ -4788,7 +4788,7 @@ dsi1_phy: phy@ae96400 {
 		gpu: gpu@5000000 {
 			compatible = "qcom,adreno-630.2", "qcom,adreno";
 
-			reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>;
+			reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>;
 			reg-names = "kgsl_3d0_reg_memory", "cx_mem";
 
 			/*
@@ -4858,7 +4858,7 @@ opp-257000000 {
 
 		adreno_smmu: iommu@5040000 {
 			compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
-			reg = <0 0x5040000 0 0x10000>;
+			reg = <0 0x05040000 0 0x10000>;
 			#iommu-cells = <1>;
 			#global-interrupts = <2>;
 			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
@@ -4881,9 +4881,9 @@ adreno_smmu: iommu@5040000 {
 		gmu: gmu@506a000 {
 			compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
 
-			reg = <0 0x506a000 0 0x30000>,
-			      <0 0xb280000 0 0x10000>,
-			      <0 0xb480000 0 0x10000>;
+			reg = <0 0x0506a000 0 0x30000>,
+			      <0 0x0b280000 0 0x10000>,
+			      <0 0x0b480000 0 0x10000>;
 			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
 
 			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.39.0

[PATCH v2 10/17] arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sm8250.dtsi | 54 ++++++++++++++--------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 0b6a6a809503..a642ff1af094 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1899,10 +1899,10 @@ pcie0_phy: phy@1c06000 {
 			status = "disabled";
 
 			pcie0_lane: phy@1c06200 {
-				reg = <0 0x1c06200 0 0x170>, /* tx */
-				      <0 0x1c06400 0 0x200>, /* rx */
-				      <0 0x1c06800 0 0x1f0>, /* pcs */
-				      <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+				reg = <0 0x01c06200 0 0x170>, /* tx */
+				      <0 0x01c06400 0 0x200>, /* rx */
+				      <0 0x01c06800 0 0x1f0>, /* pcs */
+				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -2005,12 +2005,12 @@ pcie1_phy: phy@1c0e000 {
 			status = "disabled";
 
 			pcie1_lane: phy@1c0e200 {
-				reg = <0 0x1c0e200 0 0x170>, /* tx0 */
-				      <0 0x1c0e400 0 0x200>, /* rx0 */
-				      <0 0x1c0ea00 0 0x1f0>, /* pcs */
-				      <0 0x1c0e600 0 0x170>, /* tx1 */
-				      <0 0x1c0e800 0 0x200>, /* rx1 */
-				      <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
+				      <0 0x01c0e400 0 0x200>, /* rx0 */
+				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
+				      <0 0x01c0e600 0 0x170>, /* tx1 */
+				      <0 0x01c0e800 0 0x200>, /* rx1 */
+				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -2094,7 +2094,7 @@ pcie2: pci@1c10000 {
 
 		pcie2_phy: phy@1c16000 {
 			compatible = "qcom,sm8250-qmp-modem-pcie-phy";
-			reg = <0 0x1c16000 0 0x1c0>;
+			reg = <0 0x01c16000 0 0x1c0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -2113,12 +2113,12 @@ pcie2_phy: phy@1c16000 {
 			status = "disabled";
 
 			pcie2_lane: phy@1c16200 {
-				reg = <0 0x1c16200 0 0x170>, /* tx0 */
-				      <0 0x1c16400 0 0x200>, /* rx0 */
-				      <0 0x1c16a00 0 0x1f0>, /* pcs */
-				      <0 0x1c16600 0 0x170>, /* tx1 */
-				      <0 0x1c16800 0 0x200>, /* rx1 */
-				      <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				reg = <0 0x01c16200 0 0x170>, /* tx0 */
+				      <0 0x01c16400 0 0x200>, /* rx0 */
+				      <0 0x01c16a00 0 0x1f0>, /* pcs */
+				      <0 0x01c16600 0 0x170>, /* tx1 */
+				      <0 0x01c16800 0 0x200>, /* rx1 */
+				      <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -3792,16 +3792,16 @@ camss: camss@ac6a000 {
 			compatible = "qcom,sm8250-camss";
 			status = "disabled";
 
-			reg = <0 0xac6a000 0 0x2000>,
-			      <0 0xac6c000 0 0x2000>,
-			      <0 0xac6e000 0 0x1000>,
-			      <0 0xac70000 0 0x1000>,
-			      <0 0xac72000 0 0x1000>,
-			      <0 0xac74000 0 0x1000>,
-			      <0 0xacb4000 0 0xd000>,
-			      <0 0xacc3000 0 0xd000>,
-			      <0 0xacd9000 0 0x2200>,
-			      <0 0xacdb200 0 0x2200>;
+			reg = <0 0x0ac6a000 0 0x2000>,
+			      <0 0x0ac6c000 0 0x2000>,
+			      <0 0x0ac6e000 0 0x1000>,
+			      <0 0x0ac70000 0 0x1000>,
+			      <0 0x0ac72000 0 0x1000>,
+			      <0 0x0ac74000 0 0x1000>,
+			      <0 0x0acb4000 0 0xd000>,
+			      <0 0x0acc3000 0 0xd000>,
+			      <0 0x0acd9000 0 0x2200>,
+			      <0 0x0acdb200 0 0x2200>;
 			reg-names = "csiphy0",
 				    "csiphy1",
 				    "csiphy2",
-- 
2.39.0

[PATCH v2 11/17] arm64: dts: qcom: sm8350: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sm8350.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 067613ca9c03..5f191ebbf724 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1598,9 +1598,9 @@ ipa: ipa@1e40000 {
 
 			iommus = <&apps_smmu 0x5c0 0x0>,
 				 <&apps_smmu 0x5c2 0x0>;
-			reg = <0 0x1e40000 0 0x8000>,
-			      <0 0x1e50000 0 0x4b20>,
-			      <0 0x1e04000 0 0x23000>;
+			reg = <0 0x01e40000 0 0x8000>,
+			      <0 0x01e50000 0 0x4b20>,
+			      <0 0x01e04000 0 0x23000>;
 			reg-names = "ipa-reg",
 				    "ipa-shared",
 				    "gsi";
@@ -1731,11 +1731,11 @@ sram@c3f0000 {
 
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x0 0xc440000 0x0 0x1100>,
-			      <0x0 0xc600000 0x0 0x2000000>,
-			      <0x0 0xe600000 0x0 0x100000>,
-			      <0x0 0xe700000 0x0 0xa0000>,
-			      <0x0 0xc40a000 0x0 0x26000>;
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.39.0

[PATCH v2 12/17] arm64: dts: qcom: sc7180: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index f71cf21a8dd8..67b9ae3eff83 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -690,8 +690,8 @@ gpu_speed_bin: gpu_speed_bin@1d2 {
 
 		sdhc_1: mmc@7c4000 {
 			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0 0x7c4000 0 0x1000>,
-				<0 0x07c5000 0 0x1000>;
+			reg = <0 0x007c4000 0 0x1000>,
+				<0 0x007c5000 0 0x1000>;
 			reg-names = "hc", "cqhci";
 
 			iommus = <&apps_smmu 0x60 0x0>;
@@ -1421,9 +1421,9 @@ ipa: ipa@1e40000 {
 
 			iommus = <&apps_smmu 0x440 0x0>,
 				 <&apps_smmu 0x442 0x0>;
-			reg = <0 0x1e40000 0 0x7000>,
-			      <0 0x1e47000 0 0x2000>,
-			      <0 0x1e04000 0 0x2c000>;
+			reg = <0 0x01e40000 0 0x7000>,
+			      <0 0x01e47000 0 0x2000>,
+			      <0 0x01e04000 0 0x2c000>;
 			reg-names = "ipa-reg",
 				    "ipa-shared",
 				    "gsi";
@@ -3116,11 +3116,11 @@ mdss_dp: displayport-controller@ae90000 {
 				compatible = "qcom,sc7180-dp";
 				status = "disabled";
 
-				reg = <0 0xae90000 0 0x200>,
-				      <0 0xae90200 0 0x200>,
-				      <0 0xae90400 0 0xc00>,
-				      <0 0xae91000 0 0x400>,
-				      <0 0xae91400 0 0x400>;
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0xc00>,
+				      <0 0x0ae91000 0 0x400>,
+				      <0 0x0ae91400 0 0x400>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <12>;
-- 
2.39.0

[PATCH v2 13/17] arm64: dts: qcom: sc7280: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sc7280.dtsi | 46 ++++++++++++++--------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 0adf13399e64..cbf571baca9b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2171,9 +2171,9 @@ ipa: ipa@1e40000 {
 
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x482 0x0>;
-			reg = <0 0x1e40000 0 0x8000>,
-			      <0 0x1e50000 0 0x4ad0>,
-			      <0 0x1e04000 0 0x23000>;
+			reg = <0 0x01e40000 0 0x8000>,
+			      <0 0x01e50000 0 0x4ad0>,
+			      <0 0x01e04000 0 0x23000>;
 			reg-names = "ipa-reg",
 				    "ipa-shared",
 				    "gsi";
@@ -2455,7 +2455,7 @@ lpass_cpu: audio@3987000 {
 
 		lpass_hm: clock-controller@3c00000 {
 			compatible = "qcom,sc7280-lpasshm";
-			reg = <0 0x3c00000 0 0x28>;
+			reg = <0 0x03c00000 0 0x28>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "bi_tcxo";
 			#clock-cells = <1>;
@@ -3489,7 +3489,7 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 
 		pmu@9091000 {
 			compatible = "qcom,sc7280-llcc-bwmon";
-			reg = <0 0x9091000 0 0x1000>;
+			reg = <0 0x09091000 0 0x1000>;
 
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -3571,7 +3571,7 @@ dc_noc: interconnect@90e0000 {
 		};
 
 		gem_noc: interconnect@9100000 {
-			reg = <0 0x9100000 0 0xe2200>;
+			reg = <0 0x09100000 0 0xe2200>;
 			compatible = "qcom,sc7280-gem-noc";
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
@@ -3586,8 +3586,8 @@ system-cache-controller@9200000 {
 
 		eud: eud@88e0000 {
 			compatible = "qcom,sc7280-eud","qcom,eud";
-			reg = <0 0x88e0000 0 0x2000>,
-			      <0 0x88e2000 0 0x1000>;
+			reg = <0 0x088e0000 0 0x2000>,
+			      <0 0x088e2000 0 0x1000>;
 			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
 			ports {
 				port@0 {
@@ -3750,7 +3750,7 @@ opp-460000048 {
 
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sc7280-videocc";
-			reg = <0 0xaaf0000 0 0x10000>;
+			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				<&rpmhcc RPMH_CXO_CLK_A>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao";
@@ -3773,7 +3773,7 @@ camcc: clock-controller@ad00000 {
 
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sc7280-dispcc";
-			reg = <0 0xaf00000 0 0x20000>;
+			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi_phy 0>,
@@ -4001,10 +4001,10 @@ mdss_edp: edp@aea0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&edp_hot_plug_det>;
 
-				reg = <0 0xaea0000 0 0x200>,
-				      <0 0xaea0200 0 0x200>,
-				      <0 0xaea0400 0 0xc00>,
-				      <0 0xaea1000 0 0x400>;
+				reg = <0 0x0aea0000 0 0x200>,
+				      <0 0x0aea0200 0 0x200>,
+				      <0 0x0aea0400 0 0xc00>,
+				      <0 0x0aea1000 0 0x400>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <14>;
@@ -4076,10 +4076,10 @@ opp-810000000 {
 			mdss_edp_phy: phy@aec2a00 {
 				compatible = "qcom,sc7280-edp-phy";
 
-				reg = <0 0xaec2a00 0 0x19c>,
-				      <0 0xaec2200 0 0xa0>,
-				      <0 0xaec2600 0 0xa0>,
-				      <0 0xaec2000 0 0x1c0>;
+				reg = <0 0x0aec2a00 0 0x19c>,
+				      <0 0x0aec2200 0 0xa0>,
+				      <0 0x0aec2600 0 0xa0>,
+				      <0 0x0aec2000 0 0x1c0>;
 
 				clocks = <&rpmhcc RPMH_CXO_CLK>,
 					 <&gcc GCC_EDP_CLKREF_EN>;
@@ -4095,11 +4095,11 @@ mdss_edp_phy: phy@aec2a00 {
 			mdss_dp: displayport-controller@ae90000 {
 				compatible = "qcom,sc7280-dp";
 
-				reg = <0 0xae90000 0 0x200>,
-				      <0 0xae90200 0 0x200>,
-				      <0 0xae90400 0 0xc00>,
-				      <0 0xae91000 0 0x400>,
-				      <0 0xae91400 0 0x400>;
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0xc00>,
+				      <0 0x0ae91000 0 0x400>,
+				      <0 0x0ae91400 0 0x400>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <12>;
-- 
2.39.0

[PATCH v2 14/17] arm64: dts: qcom: msm8994-octagon: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 .../dts/qcom/msm8994-msft-lumia-octagon.dtsi  | 52 +++++++++----------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index 9b67f0d3820c..4520a7e86d5b 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -127,98 +127,98 @@ reserved-memory {
 		 */
 
 		uefi_mem: memory@200000 {
-			reg = <0 0x200000 0 0x100000>;
+			reg = <0 0x00200000 0 0x100000>;
 			no-map;
 		};
 
 		mppark_mem: memory@300000 {
-			reg = <0 0x300000 0 0x80000>;
+			reg = <0 0x00300000 0 0x80000>;
 			no-map;
 		};
 
 		fbpt_mem: memory@380000 {
-			reg = <0 0x380000 0 0x1000>;
+			reg = <0 0x00380000 0 0x1000>;
 			no-map;
 		};
 
 		dbg2_mem: memory@381000 {
-			reg = <0 0x381000 0 0x4000>;
+			reg = <0 0x00381000 0 0x4000>;
 			no-map;
 		};
 
 		capsule_mem: memory@385000 {
-			reg = <0 0x385000 0 0x1000>;
+			reg = <0 0x00385000 0 0x1000>;
 			no-map;
 		};
 
 		tpmctrl_mem: memory@386000 {
-			reg = <0 0x386000 0 0x3000>;
+			reg = <0 0x00386000 0 0x3000>;
 			no-map;
 		};
 
 		uefiinfo_mem: memory@389000 {
-			reg = <0 0x389000 0 0x1000>;
+			reg = <0 0x00389000 0 0x1000>;
 			no-map;
 		};
 
 		reset_mem: memory@389000 {
-			reg = <0 0x389000 0 0x1000>;
+			reg = <0 0x00389000 0 0x1000>;
 			no-map;
 		};
 
 		resuncached_mem: memory@38e000 {
-			reg = <0 0x38e000 0 0x72000>;
+			reg = <0 0x0038e000 0 0x72000>;
 			no-map;
 		};
 
 		disp_mem: memory@400000 {
-			reg = <0 0x400000 0 0x800000>;
+			reg = <0 0x00400000 0 0x800000>;
 			no-map;
 		};
 
 		uefistack_mem: memory@c00000 {
-			reg = <0 0xc00000 0 0x40000>;
+			reg = <0 0x00c00000 0 0x40000>;
 			no-map;
 		};
 
 		cpuvect_mem: memory@c40000 {
-			reg = <0 0xc40000 0 0x10000>;
+			reg = <0 0x00c40000 0 0x10000>;
 			no-map;
 		};
 
 		rescached_mem: memory@400000 {
-			reg = <0 0xc50000 0 0xb0000>;
+			reg = <0 0x00c50000 0 0xb0000>;
 			no-map;
 		};
 
 		tzapps_mem: memory@6500000 {
-			reg = <0 0x6500000 0 0x500000>;
+			reg = <0 0x06500000 0 0x500000>;
 			no-map;
 		};
 
 		smem_mem: memory@6a00000 {
-			reg = <0 0x6a00000 0 0x200000>;
+			reg = <0 0x06a00000 0 0x200000>;
 			no-map;
 		};
 
 		hyp_mem: memory@6c00000 {
-			reg = <0 0x6c00000 0 0x100000>;
+			reg = <0 0x06c00000 0 0x100000>;
 			no-map;
 		};
 
 		tz_mem: memory@6d00000 {
-			reg = <0 0x6d00000 0 0x160000>;
+			reg = <0 0x06d00000 0 0x160000>;
 			no-map;
 		};
 
 		rfsa_adsp_mem: memory@6e60000 {
-			reg = <0 0x6e60000 0 0x10000>;
+			reg = <0 0x06e60000 0 0x10000>;
 			no-map;
 		};
 
 		rfsa_mpss_mem: memory@6e70000 {
 			compatible = "qcom,rmtfs-mem";
-			reg = <0 0x6e70000 0 0x10000>;
+			reg = <0 0x06e70000 0 0x10000>;
 			no-map;
 
 			qcom,client-id = <1>;
@@ -229,7 +229,7 @@ rfsa_mpss_mem: memory@6e70000 {
 		 * MPSS_EFS / SBL
 		 */
 		mba_mem: memory@6e80000 {
-			reg = <0 0x6e80000 0 0x180000>;
+			reg = <0 0x06e80000 0 0x180000>;
 			no-map;
 		};
 
@@ -239,33 +239,33 @@ mba_mem: memory@6e80000 {
 		 */
 
 		mpss_mem: memory@7000000 {
-			reg = <0 0x7000000 0 0x5a00000>;
+			reg = <0 0x07000000 0 0x5a00000>;
 			no-map;
 		};
 
 		adsp_mem: memory@ca00000 {
-			reg = <0 0xca00000 0 0x1800000>;
+			reg = <0 0x0ca00000 0 0x1800000>;
 			no-map;
 		};
 
 		venus_mem: memory@e200000 {
-			reg = <0 0xe200000 0 0x500000>;
+			reg = <0 0x0e200000 0 0x500000>;
 			no-map;
 		};
 
 		pil_metadata_mem: memory@e700000 {
-			reg = <0 0xe700000 0 0x4000>;
+			reg = <0 0x0e700000 0 0x4000>;
 			no-map;
 		};
 
 		memory@e704000 {
-			reg = <0 0xe704000 0 0x7fc000>;
+			reg = <0 0x0e704000 0 0x7fc000>;
 			no-map;
 		};
 		/* Peripheral Image loader region end */
 
 		cnss_mem: memory@ef00000 {
-			reg = <0 0xef00000 0 0x300000>;
+			reg = <0 0x0ef00000 0 0x300000>;
 			no-map;
 		};
 	};
-- 
2.39.0

[PATCH v2 15/17] arm64: dts: qcom: sm8450: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sm8450.dtsi | 48 ++++++++++++++--------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 2194bbac8ee0..bca859cde31c 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -743,7 +743,7 @@ gcc: clock-controller@100000 {
 		gpi_dma2: dma-controller@800000 {
 			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
-			reg = <0 0x800000 0 0x60000>;
+			reg = <0 0x00800000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
@@ -1064,7 +1064,7 @@ spi21: spi@898000 {
 		gpi_dma0: dma-controller@900000 {
 			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
-			reg = <0 0x900000 0 0x60000>;
+			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -1345,7 +1345,7 @@ spi5: spi@994000 {
 
 			i2c6: i2c@998000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x998000 0x0 0x4000>;
+				reg = <0x0 0x00998000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 				pinctrl-names = "default";
@@ -1365,7 +1365,7 @@ i2c6: i2c@998000 {
 
 			spi6: spi@998000 {
 				compatible = "qcom,geni-spi";
-				reg = <0x0 0x998000 0x0 0x4000>;
+				reg = <0x0 0x00998000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
@@ -1400,7 +1400,7 @@ uart7: serial@99c000 {
 		gpi_dma1: dma-controller@a00000 {
 			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
-			reg = <0 0xa00000 0 0x60000>;
+			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
@@ -1810,10 +1810,10 @@ pcie0_phy: phy@1c06000 {
 			status = "disabled";
 
 			pcie0_lane: phy@1c06200 {
-				reg = <0 0x1c06e00 0 0x200>, /* tx */
-				      <0 0x1c07000 0 0x200>, /* rx */
-				      <0 0x1c06200 0 0x200>, /* pcs */
-				      <0 0x1c06600 0 0x200>; /* pcs_pcie */
+				reg = <0 0x01c06e00 0 0x200>, /* tx */
+				      <0 0x01c07000 0 0x200>, /* rx */
+				      <0 0x01c06200 0 0x200>, /* pcs */
+				      <0 0x01c06600 0 0x200>; /* pcs_pcie */
 				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -1917,12 +1917,12 @@ pcie1_phy: phy@1c0f000 {
 			status = "disabled";
 
 			pcie1_lane: phy@1c0e000 {
-				reg = <0 0x1c0e000 0 0x200>, /* tx */
-				      <0 0x1c0e200 0 0x300>, /* rx */
-				      <0 0x1c0f200 0 0x200>, /* pcs */
-				      <0 0x1c0e800 0 0x200>, /* tx */
-				      <0 0x1c0ea00 0 0x300>, /* rx */
-				      <0 0x1c0f400 0 0xc00>; /* pcs_pcie */
+				reg = <0 0x01c0e000 0 0x200>, /* tx */
+				      <0 0x01c0e200 0 0x300>, /* rx */
+				      <0 0x01c0f200 0 0x200>, /* pcs */
+				      <0 0x01c0e800 0 0x200>, /* tx */
+				      <0 0x01c0ea00 0 0x300>, /* rx */
+				      <0 0x01c0f400 0 0xc00>; /* pcs_pcie */
 				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -2147,7 +2147,7 @@ swr4: soundwire-controller@31f0000 {
 
 		rxmacro: codec@3200000 {
 			compatible = "qcom,sm8450-lpass-rx-macro";
-			reg = <0 0x3200000 0 0x1000>;
+			reg = <0 0x03200000 0 0x1000>;
 			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2168,7 +2168,7 @@ rxmacro: codec@3200000 {
 
 		swr1: soundwire-controller@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
-			reg = <0 0x3210000 0 0x2000>;
+			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rxmacro>;
 			clock-names = "iface";
@@ -2193,7 +2193,7 @@ swr1: soundwire-controller@3210000 {
 
 		txmacro: codec@3220000 {
 			compatible = "qcom,sm8450-lpass-tx-macro";
-			reg = <0 0x3220000 0 0x1000>;
+			reg = <0 0x03220000 0 0x1000>;
 			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2260,7 +2260,7 @@ swr0: soundwire-controller@3250000 {
 
 		swr2: soundwire-controller@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
-			reg = <0 0x33b0000 0 0x2000>;
+			reg = <0 0x033b0000 0 0x2000>;
 			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wake";
@@ -2555,7 +2555,7 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 
 		cci0: cci@ac15000 {
 			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
-			reg = <0 0xac15000 0 0x1000>;
+			reg = <0 0x0ac15000 0 0x1000>;
 			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -2594,7 +2594,7 @@ cci0_i2c1: i2c-bus@1 {
 
 		cci1: cci@ac16000 {
 			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
-			reg = <0 0xac16000 0 0x1000>;
+			reg = <0 0x0ac16000 0 0x1000>;
 			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -3259,8 +3259,8 @@ qup_uart20_default: qup-uart20-default-state {
 
 		lpass_tlmm: pinctrl@3440000{
 			compatible = "qcom,sm8450-lpass-lpi-pinctrl";
-			reg = <0 0x3440000 0x0 0x20000>,
-			      <0 0x34d0000 0x0 0x10000>;
+			reg = <0 0x03440000 0x0 0x20000>,
+			      <0 0x034d0000 0x0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 23>;
@@ -3847,7 +3847,7 @@ nsp_noc: interconnect@320c0000 {
 
 		lpass_ag_noc: interconnect@3c40000 {
 			compatible = "qcom,sm8450-lpass-ag-noc";
-			reg = <0 0x3c40000 0 0x17200>;
+			reg = <0 0x03c40000 0 0x17200>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
-- 
2.39.0

[PATCH v2 16/17] arm64: dts: qcom: msm8994-kitakami: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index f3d153c34918..3ceb86b06209 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -163,7 +163,7 @@ &blsp2_uart2 {
  * mainline Linux.
  */
 &cont_splash_mem {
-	reg = <0 0x3401000 0 0x2200000>;
+	reg = <0 0x03401000 0 0x2200000>;
 };
 
 &pmi8994_spmi_regulators {
-- 
2.39.0

[PATCH v2 17/17] arm64: dts: qcom: sm6115: Pad addresses to 8 hex digits

[Konrad Dybcio]

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sm6115.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index b3ed6ec16205..76dab4c2e8ed 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -831,9 +831,9 @@ ufs_mem_phy: phy@4807000 {
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@4807400 {
-				reg = <0 0x4807400 0 0x098>,
-				      <0 0x4807600 0 0x130>,
-				      <0 0x4807c00 0 0x16c>;
+				reg = <0 0x04807400 0 0x098>,
+				      <0 0x04807600 0 0x130>,
+				      <0 0x04807c00 0 0x16c>;
 				#phy-cells = <0>;
 			};
 		};
-- 
2.39.0

Re: [PATCH v2 00/17] Misc DT style fixes

[Bjorn Andersson]

On Mon, 2 Jan 2023 10:46:25 +0100, Konrad Dybcio wrote:
> As part of trying to write up everything we care about when reviewing
> DTs [1], I put my regex to a test and removed some reg inconsistencies,
> among fixing up some other things in ipq6018.
> 
> v1 available at [2].
> 
> No dependencies as far as I'm aware.
> 
> [...]

Applied, thanks!

[01/17] arm64: dts: qcom: ipq6018: Pad addresses to 8 hex digits
        commit: 647380e41520c7dbd651ebf0d9fd7dfa4928f42d
[02/17] arm64: dts: qcom: ipq6018: Fix up indentation
        commit: c2596b717e9d96ae57c45481acfbafe9d3d54e56
[03/17] arm64: dts: qcom: ipq6018: Sort nodes properly
        commit: 2c6e322a41c5e1ca45be50b9d5fbcda62dc23a0d
[04/17] arm64: dts: qcom: ipq6018: Add/remove some newlines
        commit: 6db9ed9a128cbae1423d043f3debd8bfa77783fd
[05/17] arm64: dts: qcom: ipq6018: Use lowercase hex
        commit: 7356ae3e10abd1d71f06ff0b8a8e72aa7c955c57
[06/17] arm64: dts: qcom: sc8280xp: Pad addresses to 8 hex digits
        commit: 8d5bf0b2dca784f0c1003d754556276ec2d54c75
[07/17] arm64: dts: qcom: sm8150: Pad addresses to 8 hex digits
        commit: f69732296a7426afcb5153cf4475a10bc8f15516
[08/17] arm64: dts: qcom: sm6350: Pad addresses to 8 hex digits
        commit: f48dbb34e4e0fd9bcd22c82e4610e0b426a3f1f3
[09/17] arm64: dts: qcom: sdm845: Pad addresses to 8 hex digits
        commit: 524ac48fcccd9e99b4d106049445186e9cb604b6
[10/17] arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits
        commit: 81f43efce4e1fdd2c65143dd05bd69fae563c3f0
[11/17] arm64: dts: qcom: sm8350: Pad addresses to 8 hex digits
        commit: f3c08ae6fea78fc1bd9b633e494b3d60cc1844db
[12/17] arm64: dts: qcom: sc7180: Pad addresses to 8 hex digits
        commit: 26c471991dc852cf2df9bf857f93734390ae3c34
[13/17] arm64: dts: qcom: sc7280: Pad addresses to 8 hex digits
        commit: 94ca994d7e932cd36b7e19ff4bdd3aec8f04330e
[14/17] arm64: dts: qcom: msm8994-octagon: Pad addresses to 8 hex digits
        commit: 426900a959b361b97890a66166c1183d58731a58
[15/17] arm64: dts: qcom: sm8450: Pad addresses to 8 hex digits
        commit: a58cde4d66e18a1b1f270488a03b471bdbb956c1
[16/17] arm64: dts: qcom: msm8994-kitakami: Pad addresses to 8 hex digits
        commit: 690e8993ccac24e9b15d550a6db9ce7e3fc5a51b
[17/17] arm64: dts: qcom: sm6115: Pad addresses to 8 hex digits
        commit: 1d09705a6456ade74734f408e09a033c1542d426

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>