[RFC PATCH] netfilter: conntrack: simplify sctp state machine

[RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Sriram Yagnaraman]

All the paths in an SCTP connection are kept alive either by actual
DATA/SACK running through the connection or by HEARTBEAT. This patch
proposes a simple state machine with only two states OPEN_WAIT and
ESTABLISHED (similar to UDP). The reason for this change is a full
stateful approach to SCTP is difficult when the association is
multihomed since the endpoints could use different paths in the network
during the lifetime of an association.

Default timeouts are:
OPEN_WAIT:   3 seconds   (rto_initial)
ESTABLISHED: 210 seconds (rto_max + hb_interval * path_max_retrans)

Important changes/notes
- Timeout is used to clean up conntrack entries
- VTAG checks are kept as is (can be moved to a conntrack extension if
  desired)
- SCTP chunks are parsed only once, and a map is populated with the
  information on the chunks present in the packet
- ASSURED bit is NOT set in this version of the patch, need help
  understanding when to set it

Note that this patch has changed uapi headers.

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
---
 .../uapi/linux/netfilter/nf_conntrack_sctp.h  |  10 +-
 .../linux/netfilter/nfnetlink_cttimeout.h     |  10 +-
 net/netfilter/nf_conntrack_proto_sctp.c       | 589 ++++--------------
 net/netfilter/nf_conntrack_standalone.c       |  72 +--
 4 files changed, 143 insertions(+), 538 deletions(-)

diff --git a/include/uapi/linux/netfilter/nf_conntrack_sctp.h b/include/uapi/linux/netfilter/nf_conntrack_sctp.h
index c742469afe21..89381a57021a 100644
--- a/include/uapi/linux/netfilter/nf_conntrack_sctp.h
+++ b/include/uapi/linux/netfilter/nf_conntrack_sctp.h
@@ -7,16 +7,8 @@
 
 enum sctp_conntrack {
 	SCTP_CONNTRACK_NONE,
-	SCTP_CONNTRACK_CLOSED,
-	SCTP_CONNTRACK_COOKIE_WAIT,
-	SCTP_CONNTRACK_COOKIE_ECHOED,
+	SCTP_CONNTRACK_OPEN_WAIT,
 	SCTP_CONNTRACK_ESTABLISHED,
-	SCTP_CONNTRACK_SHUTDOWN_SENT,
-	SCTP_CONNTRACK_SHUTDOWN_RECD,
-	SCTP_CONNTRACK_SHUTDOWN_ACK_SENT,
-	SCTP_CONNTRACK_HEARTBEAT_SENT,
-	SCTP_CONNTRACK_HEARTBEAT_ACKED,
-	SCTP_CONNTRACK_DATA_SENT,
 	SCTP_CONNTRACK_MAX
 };
 
diff --git a/include/uapi/linux/netfilter/nfnetlink_cttimeout.h b/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
index 94e74034706d..372dfe7c07ed 100644
--- a/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
+++ b/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
@@ -86,16 +86,8 @@ enum ctattr_timeout_dccp {
 
 enum ctattr_timeout_sctp {
 	CTA_TIMEOUT_SCTP_UNSPEC,
-	CTA_TIMEOUT_SCTP_CLOSED,
-	CTA_TIMEOUT_SCTP_COOKIE_WAIT,
-	CTA_TIMEOUT_SCTP_COOKIE_ECHOED,
+	CTA_TIMEOUT_SCTP_OPEN_WAIT,
 	CTA_TIMEOUT_SCTP_ESTABLISHED,
-	CTA_TIMEOUT_SCTP_SHUTDOWN_SENT,
-	CTA_TIMEOUT_SCTP_SHUTDOWN_RECD,
-	CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT,
-	CTA_TIMEOUT_SCTP_HEARTBEAT_SENT,
-	CTA_TIMEOUT_SCTP_HEARTBEAT_ACKED,
-	CTA_TIMEOUT_SCTP_DATA_SENT,
 	__CTA_TIMEOUT_SCTP_MAX
 };
 #define CTA_TIMEOUT_SCTP_MAX (__CTA_TIMEOUT_SCTP_MAX - 1)
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index d88b92a8ffca..d79ed476b764 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -5,12 +5,13 @@
  * Copyright (c) 2004 Kiran Kumar Immidi <immidi_kiran@yahoo.com>
  * Copyright (c) 2004-2012 Patrick McHardy <kaber@trash.net>
  *
- * SCTP is defined in RFC 2960. References to various sections in this code
+ * SCTP is defined in RFC 4960. References to various sections in this code
  * are to this RFC.
  */
 
 #include <linux/types.h>
 #include <linux/timer.h>
+#include <linux/jiffies.h>
 #include <linux/netfilter.h>
 #include <linux/in.h>
 #include <linux/ip.h>
@@ -27,127 +28,19 @@
 #include <net/netfilter/nf_conntrack_ecache.h>
 #include <net/netfilter/nf_conntrack_timeout.h>
 
-/* FIXME: Examine ipfilter's timeouts and conntrack transitions more
-   closely.  They're more complex. --RR
-
-   And so for me for SCTP :D -Kiran */
+#define	SCTP_FLAG_HEARTBEAT_VTAG_FAILED	1
 
 static const char *const sctp_conntrack_names[] = {
 	"NONE",
-	"CLOSED",
-	"COOKIE_WAIT",
-	"COOKIE_ECHOED",
+	"OPEN_WAIT",
 	"ESTABLISHED",
-	"SHUTDOWN_SENT",
-	"SHUTDOWN_RECD",
-	"SHUTDOWN_ACK_SENT",
-	"HEARTBEAT_SENT",
-	"HEARTBEAT_ACKED",
 };
 
 #define SECS  * HZ
-#define MINS  * 60 SECS
-#define HOURS * 60 MINS
-#define DAYS  * 24 HOURS
 
 static const unsigned int sctp_timeouts[SCTP_CONNTRACK_MAX] = {
-	[SCTP_CONNTRACK_CLOSED]			= 10 SECS,
-	[SCTP_CONNTRACK_COOKIE_WAIT]		= 3 SECS,
-	[SCTP_CONNTRACK_COOKIE_ECHOED]		= 3 SECS,
-	[SCTP_CONNTRACK_ESTABLISHED]		= 5 DAYS,
-	[SCTP_CONNTRACK_SHUTDOWN_SENT]		= 300 SECS / 1000,
-	[SCTP_CONNTRACK_SHUTDOWN_RECD]		= 300 SECS / 1000,
-	[SCTP_CONNTRACK_SHUTDOWN_ACK_SENT]	= 3 SECS,
-	[SCTP_CONNTRACK_HEARTBEAT_SENT]		= 30 SECS,
-	[SCTP_CONNTRACK_HEARTBEAT_ACKED]	= 210 SECS,
-	[SCTP_CONNTRACK_DATA_SENT]		= 30 SECS,
-};
-
-#define	SCTP_FLAG_HEARTBEAT_VTAG_FAILED	1
-
-#define sNO SCTP_CONNTRACK_NONE
-#define	sCL SCTP_CONNTRACK_CLOSED
-#define	sCW SCTP_CONNTRACK_COOKIE_WAIT
-#define	sCE SCTP_CONNTRACK_COOKIE_ECHOED
-#define	sES SCTP_CONNTRACK_ESTABLISHED
-#define	sSS SCTP_CONNTRACK_SHUTDOWN_SENT
-#define	sSR SCTP_CONNTRACK_SHUTDOWN_RECD
-#define	sSA SCTP_CONNTRACK_SHUTDOWN_ACK_SENT
-#define	sHS SCTP_CONNTRACK_HEARTBEAT_SENT
-#define	sHA SCTP_CONNTRACK_HEARTBEAT_ACKED
-#define	sDS SCTP_CONNTRACK_DATA_SENT
-#define	sIV SCTP_CONNTRACK_MAX
-
-/*
-	These are the descriptions of the states:
-
-NOTE: These state names are tantalizingly similar to the states of an
-SCTP endpoint. But the interpretation of the states is a little different,
-considering that these are the states of the connection and not of an end
-point. Please note the subtleties. -Kiran
-
-NONE              - Nothing so far.
-COOKIE WAIT       - We have seen an INIT chunk in the original direction, or also
-		    an INIT_ACK chunk in the reply direction.
-COOKIE ECHOED     - We have seen a COOKIE_ECHO chunk in the original direction.
-ESTABLISHED       - We have seen a COOKIE_ACK in the reply direction.
-SHUTDOWN_SENT     - We have seen a SHUTDOWN chunk in the original direction.
-SHUTDOWN_RECD     - We have seen a SHUTDOWN chunk in the reply direction.
-SHUTDOWN_ACK_SENT - We have seen a SHUTDOWN_ACK chunk in the direction opposite
-		    to that of the SHUTDOWN chunk.
-CLOSED            - We have seen a SHUTDOWN_COMPLETE chunk in the direction of
-		    the SHUTDOWN chunk. Connection is closed.
-HEARTBEAT_SENT    - We have seen a HEARTBEAT in a new flow.
-HEARTBEAT_ACKED   - We have seen a HEARTBEAT-ACK/DATA/SACK in the direction
-		    opposite to that of the HEARTBEAT/DATA chunk. Secondary connection
-		    is established.
-DATA_SENT         - We have seen a DATA/SACK in a new flow.
-*/
-
-/* TODO
- - I have assumed that the first INIT is in the original direction.
- This messes things when an INIT comes in the reply direction in CLOSED
- state.
- - Check the error type in the reply dir before transitioning from
-cookie echoed to closed.
- - Sec 5.2.4 of RFC 2960
- - Full Multi Homing support.
-*/
-
-/* SCTP conntrack state transitions */
-static const u8 sctp_conntracks[2][12][SCTP_CONNTRACK_MAX] = {
-	{
-/*	ORIGINAL	*/
-/*                  sNO, sCL, sCW, sCE, sES, sSS, sSR, sSA, sHS, sHA, sDS */
-/* init         */ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sSA, sCW, sHA, sCW},
-/* init_ack     */ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sSA, sCL, sHA, sCL},
-/* abort        */ {sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL},
-/* shutdown     */ {sCL, sCL, sCW, sCE, sSS, sSS, sSR, sSA, sCL, sSS, sCL},
-/* shutdown_ack */ {sSA, sCL, sCW, sCE, sES, sSA, sSA, sSA, sSA, sHA, sSA},
-/* error        */ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sSA, sCL, sHA, sCL},/* Can't have Stale cookie*/
-/* cookie_echo  */ {sCL, sCL, sCE, sCE, sES, sSS, sSR, sSA, sCL, sHA, sCL},/* 5.2.4 - Big TODO */
-/* cookie_ack   */ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sSA, sCL, sHA, sCL},/* Can't come in orig dir */
-/* shutdown_comp*/ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sCL, sCL, sHA, sCL},
-/* heartbeat    */ {sHS, sCL, sCW, sCE, sES, sSS, sSR, sSA, sHS, sHA, sDS},
-/* heartbeat_ack*/ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sSA, sHS, sHA, sDS},
-/* data/sack    */ {sDS, sCL, sCW, sCE, sES, sSS, sSR, sSA, sHS, sHA, sDS}
-	},
-	{
-/*	REPLY	*/
-/*                  sNO, sCL, sCW, sCE, sES, sSS, sSR, sSA, sHS, sHA, sDS */
-/* init         */ {sIV, sCL, sCW, sCE, sES, sSS, sSR, sSA, sIV, sHA, sIV},/* INIT in sCL Big TODO */
-/* init_ack     */ {sIV, sCW, sCW, sCE, sES, sSS, sSR, sSA, sIV, sHA, sIV},
-/* abort        */ {sIV, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sIV, sCL, sIV},
-/* shutdown     */ {sIV, sCL, sCW, sCE, sSR, sSS, sSR, sSA, sIV, sSR, sIV},
-/* shutdown_ack */ {sIV, sCL, sCW, sCE, sES, sSA, sSA, sSA, sIV, sHA, sIV},
-/* error        */ {sIV, sCL, sCW, sCL, sES, sSS, sSR, sSA, sIV, sHA, sIV},
-/* cookie_echo  */ {sIV, sCL, sCW, sCE, sES, sSS, sSR, sSA, sIV, sHA, sIV},/* Can't come in reply dir */
-/* cookie_ack   */ {sIV, sCL, sCW, sES, sES, sSS, sSR, sSA, sIV, sHA, sIV},
-/* shutdown_comp*/ {sIV, sCL, sCW, sCE, sES, sSS, sSR, sCL, sIV, sHA, sIV},
-/* heartbeat    */ {sIV, sCL, sCW, sCE, sES, sSS, sSR, sSA, sHS, sHA, sHA},
-/* heartbeat_ack*/ {sIV, sCL, sCW, sCE, sES, sSS, sSR, sSA, sHA, sHA, sHA},
-/* data/sack    */ {sIV, sCL, sCW, sCE, sES, sSS, sSR, sSA, sHA, sHA, sHA},
-	}
+	[SCTP_CONNTRACK_OPEN_WAIT]			= 3 SECS,
+	[SCTP_CONNTRACK_ESTABLISHED]		= 210 SECS,
 };
 
 #ifdef CONFIG_NF_CONNTRACK_PROCFS
@@ -158,184 +51,6 @@ static void sctp_print_conntrack(struct seq_file *s, struct nf_conn *ct)
 }
 #endif
 
-#define for_each_sctp_chunk(skb, sch, _sch, offset, dataoff, count)	\
-for ((offset) = (dataoff) + sizeof(struct sctphdr), (count) = 0;	\
-	(offset) < (skb)->len &&					\
-	((sch) = skb_header_pointer((skb), (offset), sizeof(_sch), &(_sch)));	\
-	(offset) += (ntohs((sch)->length) + 3) & ~3, (count)++)
-
-/* Some validity checks to make sure the chunks are fine */
-static int do_basic_checks(struct nf_conn *ct,
-			   const struct sk_buff *skb,
-			   unsigned int dataoff,
-			   unsigned long *map)
-{
-	u_int32_t offset, count;
-	struct sctp_chunkhdr _sch, *sch;
-	int flag;
-
-	flag = 0;
-
-	for_each_sctp_chunk (skb, sch, _sch, offset, dataoff, count) {
-		pr_debug("Chunk Num: %d  Type: %d\n", count, sch->type);
-
-		if (sch->type == SCTP_CID_INIT ||
-		    sch->type == SCTP_CID_INIT_ACK ||
-		    sch->type == SCTP_CID_SHUTDOWN_COMPLETE)
-			flag = 1;
-
-		/*
-		 * Cookie Ack/Echo chunks not the first OR
-		 * Init / Init Ack / Shutdown compl chunks not the only chunks
-		 * OR zero-length.
-		 */
-		if (((sch->type == SCTP_CID_COOKIE_ACK ||
-		      sch->type == SCTP_CID_COOKIE_ECHO ||
-		      flag) &&
-		     count != 0) || !sch->length) {
-			pr_debug("Basic checks failed\n");
-			return 1;
-		}
-
-		if (map)
-			set_bit(sch->type, map);
-	}
-
-	pr_debug("Basic checks passed\n");
-	return count == 0;
-}
-
-static int sctp_new_state(enum ip_conntrack_dir dir,
-			  enum sctp_conntrack cur_state,
-			  int chunk_type)
-{
-	int i;
-
-	pr_debug("Chunk type: %d\n", chunk_type);
-
-	switch (chunk_type) {
-	case SCTP_CID_INIT:
-		pr_debug("SCTP_CID_INIT\n");
-		i = 0;
-		break;
-	case SCTP_CID_INIT_ACK:
-		pr_debug("SCTP_CID_INIT_ACK\n");
-		i = 1;
-		break;
-	case SCTP_CID_ABORT:
-		pr_debug("SCTP_CID_ABORT\n");
-		i = 2;
-		break;
-	case SCTP_CID_SHUTDOWN:
-		pr_debug("SCTP_CID_SHUTDOWN\n");
-		i = 3;
-		break;
-	case SCTP_CID_SHUTDOWN_ACK:
-		pr_debug("SCTP_CID_SHUTDOWN_ACK\n");
-		i = 4;
-		break;
-	case SCTP_CID_ERROR:
-		pr_debug("SCTP_CID_ERROR\n");
-		i = 5;
-		break;
-	case SCTP_CID_COOKIE_ECHO:
-		pr_debug("SCTP_CID_COOKIE_ECHO\n");
-		i = 6;
-		break;
-	case SCTP_CID_COOKIE_ACK:
-		pr_debug("SCTP_CID_COOKIE_ACK\n");
-		i = 7;
-		break;
-	case SCTP_CID_SHUTDOWN_COMPLETE:
-		pr_debug("SCTP_CID_SHUTDOWN_COMPLETE\n");
-		i = 8;
-		break;
-	case SCTP_CID_HEARTBEAT:
-		pr_debug("SCTP_CID_HEARTBEAT");
-		i = 9;
-		break;
-	case SCTP_CID_HEARTBEAT_ACK:
-		pr_debug("SCTP_CID_HEARTBEAT_ACK");
-		i = 10;
-		break;
-	case SCTP_CID_DATA:
-	case SCTP_CID_SACK:
-		pr_debug("SCTP_CID_DATA/SACK");
-		i = 11;
-		break;
-	default:
-		/* Other chunks like DATA or SACK do not change the state */
-		pr_debug("Unknown chunk type, Will stay in %s\n",
-			 sctp_conntrack_names[cur_state]);
-		return cur_state;
-	}
-
-	pr_debug("dir: %d   cur_state: %s  chunk_type: %d  new_state: %s\n",
-		 dir, sctp_conntrack_names[cur_state], chunk_type,
-		 sctp_conntrack_names[sctp_conntracks[dir][i][cur_state]]);
-
-	return sctp_conntracks[dir][i][cur_state];
-}
-
-/* Don't need lock here: this conntrack not in circulation yet */
-static noinline bool
-sctp_new(struct nf_conn *ct, const struct sk_buff *skb,
-	 const struct sctphdr *sh, unsigned int dataoff)
-{
-	enum sctp_conntrack new_state;
-	const struct sctp_chunkhdr *sch;
-	struct sctp_chunkhdr _sch;
-	u32 offset, count;
-
-	memset(&ct->proto.sctp, 0, sizeof(ct->proto.sctp));
-	new_state = SCTP_CONNTRACK_MAX;
-	for_each_sctp_chunk(skb, sch, _sch, offset, dataoff, count) {
-		new_state = sctp_new_state(IP_CT_DIR_ORIGINAL,
-					   SCTP_CONNTRACK_NONE, sch->type);
-
-		/* Invalid: delete conntrack */
-		if (new_state == SCTP_CONNTRACK_NONE ||
-		    new_state == SCTP_CONNTRACK_MAX) {
-			pr_debug("nf_conntrack_sctp: invalid new deleting.\n");
-			return false;
-		}
-
-		/* Copy the vtag into the state info */
-		if (sch->type == SCTP_CID_INIT) {
-			struct sctp_inithdr _inithdr, *ih;
-			/* Sec 8.5.1 (A) */
-			if (sh->vtag)
-				return false;
-
-			ih = skb_header_pointer(skb, offset + sizeof(_sch),
-						sizeof(_inithdr), &_inithdr);
-			if (!ih)
-				return false;
-
-			pr_debug("Setting vtag %x for new conn\n",
-				 ih->init_tag);
-
-			ct->proto.sctp.vtag[IP_CT_DIR_REPLY] = ih->init_tag;
-		} else if (sch->type == SCTP_CID_HEARTBEAT ||
-			   sch->type == SCTP_CID_DATA ||
-			   sch->type == SCTP_CID_SACK) {
-			pr_debug("Setting vtag %x for secondary conntrack\n",
-				 sh->vtag);
-			ct->proto.sctp.vtag[IP_CT_DIR_ORIGINAL] = sh->vtag;
-		} else {
-		/* If it is a shutdown ack OOTB packet, we expect a return
-		   shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8) */
-			pr_debug("Setting vtag %x for new conn OOTB\n",
-				 sh->vtag);
-			ct->proto.sctp.vtag[IP_CT_DIR_REPLY] = sh->vtag;
-		}
-
-		ct->proto.sctp.state = SCTP_CONNTRACK_NONE;
-	}
-
-	return true;
-}
-
 static bool sctp_error(struct sk_buff *skb,
 		       unsigned int dataoff,
 		       const struct nf_hook_state *state)
@@ -367,6 +82,12 @@ static bool sctp_error(struct sk_buff *skb,
 	return true;
 }
 
+#define for_each_sctp_chunk(skb, sch, _sch, offset, dataoff, count)	\
+for ((offset) = (dataoff) + sizeof(struct sctphdr), (count) = 0;	\
+	(offset) < (skb)->len &&					\
+	((sch) = skb_header_pointer((skb), (offset), sizeof(_sch), &(_sch)));	\
+	(offset) += (ntohs((sch)->length) + 3) & ~3, (count)++)
+
 /* Returns verdict for packet, or -NF_ACCEPT for invalid. */
 int nf_conntrack_sctp_packet(struct nf_conn *ct,
 			     struct sk_buff *skb,
@@ -374,195 +95,168 @@ int nf_conntrack_sctp_packet(struct nf_conn *ct,
 			     enum ip_conntrack_info ctinfo,
 			     const struct nf_hook_state *state)
 {
-	enum sctp_conntrack new_state, old_state;
 	enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
-	const struct sctphdr *sh;
-	struct sctphdr _sctph;
-	const struct sctp_chunkhdr *sch;
-	struct sctp_chunkhdr _sch;
-	u_int32_t offset, count;
-	unsigned int *timeouts;
 	unsigned long map[256 / sizeof(unsigned long)] = { 0 };
-	bool ignore = false;
+	unsigned int *timeouts;
+	u_int32_t init_vtag = 0;
+	u_int32_t offset, count;
+	struct sctphdr _sctph, *sctph;
+	struct sctp_chunkhdr _sch, *sch;
 
 	if (sctp_error(skb, dataoff, state))
-		return -NF_ACCEPT;
+		goto out_drop;
+
+	sctph = skb_header_pointer(skb, dataoff, sizeof(_sctph), &_sctph);
+	if (sctph == NULL)
+		goto out_drop;
 
-	sh = skb_header_pointer(skb, dataoff, sizeof(_sctph), &_sctph);
-	if (sh == NULL)
-		goto out;
+	for_each_sctp_chunk (skb, sch, _sch, offset, dataoff, count) {
+		pr_debug("Chunk Num: %d  Type: %d\n", count, sch->type);
+		set_bit(sch->type, map);
 
-	if (do_basic_checks(ct, skb, dataoff, map) != 0)
-		goto out;
+		if (sch->type == SCTP_CID_INIT ||
+			sch->type == SCTP_CID_INIT_ACK) {
+			struct sctp_inithdr _inith, *inith;
+			inith = skb_header_pointer(skb, offset + sizeof(_sch),
+						sizeof(_inith), &_inith);
+			if (inith)
+				init_vtag = inith->init_tag;
+			else
+				goto out_drop;
+		}
+	}
 
+	spin_lock_bh(&ct->lock);
 	if (!nf_ct_is_confirmed(ct)) {
 		/* If an OOTB packet has any of these chunks discard (Sec 8.4) */
 		if (test_bit(SCTP_CID_ABORT, map) ||
 		    test_bit(SCTP_CID_SHUTDOWN_COMPLETE, map) ||
 		    test_bit(SCTP_CID_COOKIE_ACK, map))
-			return -NF_ACCEPT;
+			goto out_unlock;
 
-		if (!sctp_new(ct, skb, sh, dataoff))
-			return -NF_ACCEPT;
+		memset(&ct->proto.sctp, 0, sizeof(ct->proto.sctp));
+		ct->proto.sctp.state = SCTP_CONNTRACK_OPEN_WAIT;
+		nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
+
+		if (test_bit(SCTP_CID_INIT, map))
+			ct->proto.sctp.vtag[!dir] = init_vtag;
+		else if (test_bit(SCTP_CID_SHUTDOWN_ACK, map))
+			/* If it is a shutdown ack OOTB packet, we expect a return
+			shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8) */
+			ct->proto.sctp.vtag[!dir] = sctph->vtag;
+		else
+			ct->proto.sctp.vtag[dir] = sctph->vtag;
 	} else {
-		/* Check the verification tag (Sec 8.5) */
-		if (!test_bit(SCTP_CID_INIT, map) &&
-		    !test_bit(SCTP_CID_SHUTDOWN_COMPLETE, map) &&
-		    !test_bit(SCTP_CID_COOKIE_ECHO, map) &&
-		    !test_bit(SCTP_CID_ABORT, map) &&
-		    !test_bit(SCTP_CID_SHUTDOWN_ACK, map) &&
-		    !test_bit(SCTP_CID_HEARTBEAT, map) &&
-		    !test_bit(SCTP_CID_HEARTBEAT_ACK, map) &&
-		    sh->vtag != ct->proto.sctp.vtag[dir]) {
-			pr_debug("Verification tag check failed\n");
-			goto out;
+		if (!ct->proto.sctp.vtag[!dir] &&
+			test_bit(SCTP_CID_INIT_ACK, map)) {
+			ct->proto.sctp.vtag[!dir] = init_vtag;
+		}
+		if (!ct->proto.sctp.vtag[dir]) {
+			ct->proto.sctp.vtag[dir] = sctph->vtag;
 		}
-	}
 
-	old_state = new_state = SCTP_CONNTRACK_NONE;
-	spin_lock_bh(&ct->lock);
-	for_each_sctp_chunk (skb, sch, _sch, offset, dataoff, count) {
-		/* Special cases of Verification tag check (Sec 8.5.1) */
-		if (sch->type == SCTP_CID_INIT) {
-			/* Sec 8.5.1 (A) */
-			if (sh->vtag != 0)
-				goto out_unlock;
-		} else if (sch->type == SCTP_CID_ABORT) {
-			/* Sec 8.5.1 (B) */
-			if (sh->vtag != ct->proto.sctp.vtag[dir] &&
-			    sh->vtag != ct->proto.sctp.vtag[!dir])
-				goto out_unlock;
-		} else if (sch->type == SCTP_CID_SHUTDOWN_COMPLETE) {
-			/* Sec 8.5.1 (C) */
-			if (sh->vtag != ct->proto.sctp.vtag[dir] &&
-			    sh->vtag != ct->proto.sctp.vtag[!dir] &&
-			    sch->flags & SCTP_CHUNK_FLAG_T)
-				goto out_unlock;
-		} else if (sch->type == SCTP_CID_COOKIE_ECHO) {
-			/* Sec 8.5.1 (D) */
-			if (sh->vtag != ct->proto.sctp.vtag[dir])
-				goto out_unlock;
-		} else if (sch->type == SCTP_CID_HEARTBEAT) {
-			if (ct->proto.sctp.vtag[dir] == 0) {
-				pr_debug("Setting %d vtag %x for dir %d\n", sch->type, sh->vtag, dir);
-				ct->proto.sctp.vtag[dir] = sh->vtag;
-			} else if (sh->vtag != ct->proto.sctp.vtag[dir]) {
-				if (test_bit(SCTP_CID_DATA, map) || ignore)
-					goto out_unlock;
-
-				ct->proto.sctp.flags |= SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
-				ct->proto.sctp.last_dir = dir;
-				ignore = true;
-				continue;
-			} else if (ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) {
-				ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
-			}
-		} else if (sch->type == SCTP_CID_HEARTBEAT_ACK) {
-			if (ct->proto.sctp.vtag[dir] == 0) {
-				pr_debug("Setting vtag %x for dir %d\n",
-					 sh->vtag, dir);
-				ct->proto.sctp.vtag[dir] = sh->vtag;
-			} else if (sh->vtag != ct->proto.sctp.vtag[dir]) {
-				if (test_bit(SCTP_CID_DATA, map) || ignore)
-					goto out_unlock;
-
-				if ((ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) == 0 ||
-				    ct->proto.sctp.last_dir == dir)
-					goto out_unlock;
-
-				ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
-				ct->proto.sctp.vtag[dir] = sh->vtag;
-				ct->proto.sctp.vtag[!dir] = 0;
-			} else if (ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) {
-				ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
-			}
-		} else if (sch->type == SCTP_CID_DATA || sch->type == SCTP_CID_SACK) {
-			if (ct->proto.sctp.vtag[dir] == 0) {
-				pr_debug("Setting vtag %x for dir %d\n", sh->vtag, dir);
-				ct->proto.sctp.vtag[dir] = sh->vtag;
-			}
+		/* we have seen traffic both ways, go to established */
+		if (dir == IP_CT_DIR_REPLY &&
+			ct->proto.sctp.state == SCTP_CONNTRACK_OPEN_WAIT) {
+			ct->proto.sctp.state = SCTP_CONNTRACK_ESTABLISHED;
+			nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
 		}
+	}
 
-		old_state = ct->proto.sctp.state;
-		new_state = sctp_new_state(dir, old_state, sch->type);
+	/* Check the verification tag (Sec 8.5) */
+	if (!test_bit(SCTP_CID_INIT, map) &&
+		!test_bit(SCTP_CID_SHUTDOWN_COMPLETE, map) &&
+		!test_bit(SCTP_CID_COOKIE_ECHO, map) &&
+		!test_bit(SCTP_CID_ABORT, map) &&
+		!test_bit(SCTP_CID_SHUTDOWN_ACK, map) &&
+		!test_bit(SCTP_CID_HEARTBEAT, map) &&
+		!test_bit(SCTP_CID_HEARTBEAT_ACK, map) &&
+		sctph->vtag != ct->proto.sctp.vtag[dir]) {
+		pr_debug("Verification tag check failed\n");
+		goto out_unlock;
+	}
 
-		/* Invalid */
-		if (new_state == SCTP_CONNTRACK_MAX) {
-			pr_debug("nf_conntrack_sctp: Invalid dir=%i ctype=%u "
-				 "conntrack=%u\n",
-				 dir, sch->type, old_state);
+	/* Special cases of Verification tag check (Sec 8.5.1) */
+	if (test_bit(SCTP_CID_INIT, map)) {
+		/* Sec 8.5.1 (A) */
+		if (sctph->vtag != 0)
 			goto out_unlock;
-		}
+		else if (nf_ct_is_confirmed(ct))
+			/* don't renew timeout on init retransmit so
+			* port reuse by client or NAT middlebox cannot
+			* keep entry alive indefinitely (incl. nat info).
+			*/
+			goto out;
+	}
+	if (test_bit(SCTP_CID_ABORT, map)) {
+		/* Sec 8.5.1 (B) */
+		if (sctph->vtag != ct->proto.sctp.vtag[dir] &&
+			sctph->vtag != ct->proto.sctp.vtag[!dir])
+			goto out_unlock;
+	}
+	if (test_bit(SCTP_CID_SHUTDOWN_COMPLETE, map)) {
+		/* Sec 8.5.1 (C) */
+		if (sctph->vtag != ct->proto.sctp.vtag[dir] &&
+			sctph->vtag != ct->proto.sctp.vtag[!dir] &&
+			sch->flags & SCTP_CHUNK_FLAG_T)
+			goto out_unlock;
+	}
+	if (test_bit(SCTP_CID_COOKIE_ECHO, map)) {
+		/* Sec 8.5.1 (D) */
+		if (sctph->vtag != ct->proto.sctp.vtag[dir])
+			goto out_unlock;
+	}
+	if (test_bit(SCTP_CID_HEARTBEAT, map)) {
+		if (sctph->vtag != ct->proto.sctp.vtag[dir]) {
+			if (test_bit(SCTP_CID_DATA, map))
+				goto out_unlock;
 
-		/* If it is an INIT or an INIT ACK note down the vtag */
-		if (sch->type == SCTP_CID_INIT ||
-		    sch->type == SCTP_CID_INIT_ACK) {
-			struct sctp_inithdr _inithdr, *ih;
+			ct->proto.sctp.flags |= SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
+			ct->proto.sctp.last_dir = dir;
+		} else if (ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) {
+			ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
+		}
+	}
+	if (sch->type == SCTP_CID_HEARTBEAT_ACK) {
+		if (sctph->vtag != ct->proto.sctp.vtag[dir]) {
+			if (test_bit(SCTP_CID_DATA, map))
+				goto out_unlock;
 
-			ih = skb_header_pointer(skb, offset + sizeof(_sch),
-						sizeof(_inithdr), &_inithdr);
-			if (ih == NULL)
+			if ((ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) == 0 ||
+				ct->proto.sctp.last_dir == dir)
 				goto out_unlock;
-			pr_debug("Setting vtag %x for dir %d\n",
-				 ih->init_tag, !dir);
-			ct->proto.sctp.vtag[!dir] = ih->init_tag;
 
-			/* don't renew timeout on init retransmit so
-			 * port reuse by client or NAT middlebox cannot
-			 * keep entry alive indefinitely (incl. nat info).
-			 */
-			if (new_state == SCTP_CONNTRACK_CLOSED &&
-			    old_state == SCTP_CONNTRACK_CLOSED &&
-			    nf_ct_is_confirmed(ct))
-				ignore = true;
+			ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
+			ct->proto.sctp.vtag[dir] = sctph->vtag;
+			ct->proto.sctp.vtag[!dir] = 0;
+		} else if (ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) {
+			ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
 		}
-
-		ct->proto.sctp.state = new_state;
-		if (old_state != new_state)
-			nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
 	}
-	spin_unlock_bh(&ct->lock);
-
-	/* allow but do not refresh timeout */
-	if (ignore)
-		return NF_ACCEPT;
 
 	timeouts = nf_ct_timeout_lookup(ct);
 	if (!timeouts)
 		timeouts = nf_sctp_pernet(nf_ct_net(ct))->timeouts;
 
-	nf_ct_refresh_acct(ct, ctinfo, skb, timeouts[new_state]);
+	nf_ct_refresh_acct(ct, ctinfo, skb, timeouts[ct->proto.sctp.state]);
 
-	if (old_state == SCTP_CONNTRACK_COOKIE_ECHOED &&
-	    dir == IP_CT_DIR_REPLY &&
-	    new_state == SCTP_CONNTRACK_ESTABLISHED) {
-		pr_debug("Setting assured bit\n");
-		set_bit(IPS_ASSURED_BIT, &ct->status);
-		nf_conntrack_event_cache(IPCT_ASSURED, ct);
-	}
+	/* Need some thought on how to set the assured bit */
+	// if (dir == IP_CT_DIR_REPLY &&
+	// 	!(test_bit(IPS_ASSURED_BIT, &ct->status))) {
+	// 	  set_bit(IPS_ASSURED_BIT, &ct->status);
+	// 	  nf_conntrack_event_cache(IPCT_ASSURED, ct);
+	// }
 
+out:
+	spin_unlock_bh(&ct->lock);
 	return NF_ACCEPT;
 
 out_unlock:
 	spin_unlock_bh(&ct->lock);
-out:
+out_drop:
 	return -NF_ACCEPT;
 }
 
-static bool sctp_can_early_drop(const struct nf_conn *ct)
-{
-	switch (ct->proto.sctp.state) {
-	case SCTP_CONNTRACK_SHUTDOWN_SENT:
-	case SCTP_CONNTRACK_SHUTDOWN_RECD:
-	case SCTP_CONNTRACK_SHUTDOWN_ACK_SENT:
-		return true;
-	default:
-		break;
-	}
-
-	return false;
-}
-
 #if IS_ENABLED(CONFIG_NF_CT_NETLINK)
 
 #include <linux/netfilter/nfnetlink.h>
@@ -670,7 +364,7 @@ static int sctp_timeout_nlattr_to_obj(struct nlattr *tb[],
 		}
 	}
 
-	timeouts[CTA_TIMEOUT_SCTP_UNSPEC] = timeouts[CTA_TIMEOUT_SCTP_CLOSED];
+	timeouts[CTA_TIMEOUT_SCTP_UNSPEC] = timeouts[CTA_TIMEOUT_SCTP_OPEN_WAIT];
 	return 0;
 }
 
@@ -692,16 +386,8 @@ sctp_timeout_obj_to_nlattr(struct sk_buff *skb, const void *data)
 
 static const struct nla_policy
 sctp_timeout_nla_policy[CTA_TIMEOUT_SCTP_MAX+1] = {
-	[CTA_TIMEOUT_SCTP_CLOSED]		= { .type = NLA_U32 },
-	[CTA_TIMEOUT_SCTP_COOKIE_WAIT]		= { .type = NLA_U32 },
-	[CTA_TIMEOUT_SCTP_COOKIE_ECHOED]	= { .type = NLA_U32 },
+	[CTA_TIMEOUT_SCTP_OPEN_WAIT]		= { .type = NLA_U32 },
 	[CTA_TIMEOUT_SCTP_ESTABLISHED]		= { .type = NLA_U32 },
-	[CTA_TIMEOUT_SCTP_SHUTDOWN_SENT]	= { .type = NLA_U32 },
-	[CTA_TIMEOUT_SCTP_SHUTDOWN_RECD]	= { .type = NLA_U32 },
-	[CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT]	= { .type = NLA_U32 },
-	[CTA_TIMEOUT_SCTP_HEARTBEAT_SENT]	= { .type = NLA_U32 },
-	[CTA_TIMEOUT_SCTP_HEARTBEAT_ACKED]	= { .type = NLA_U32 },
-	[CTA_TIMEOUT_SCTP_DATA_SENT]		= { .type = NLA_U32 },
 };
 #endif /* CONFIG_NF_CONNTRACK_TIMEOUT */
 
@@ -716,7 +402,7 @@ void nf_conntrack_sctp_init_net(struct net *net)
 	/* timeouts[0] is unused, init it so ->timeouts[0] contains
 	 * 'new' timeout, like udp or icmp.
 	 */
-	sn->timeouts[0] = sctp_timeouts[SCTP_CONNTRACK_CLOSED];
+	sn->timeouts[0] = sctp_timeouts[SCTP_CONNTRACK_OPEN_WAIT];
 }
 
 const struct nf_conntrack_l4proto nf_conntrack_l4proto_sctp = {
@@ -724,7 +410,6 @@ const struct nf_conntrack_l4proto nf_conntrack_l4proto_sctp = {
 #ifdef CONFIG_NF_CONNTRACK_PROCFS
 	.print_conntrack	= sctp_print_conntrack,
 #endif
-	.can_early_drop		= sctp_can_early_drop,
 #if IS_ENABLED(CONFIG_NF_CT_NETLINK)
 	.nlattr_size		= SCTP_NLATTR_SIZE,
 	.to_nlattr		= sctp_to_nlattr,
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 0250725e38a4..07da9db31783 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -593,16 +593,8 @@ enum nf_ct_sysctl_index {
 	NF_SYSCTL_CT_PROTO_TIMEOUT_ICMP,
 	NF_SYSCTL_CT_PROTO_TIMEOUT_ICMPV6,
 #ifdef CONFIG_NF_CT_PROTO_SCTP
-	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_CLOSED,
-	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_COOKIE_WAIT,
-	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_COOKIE_ECHOED,
+	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_OPEN_WAIT,
 	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_ESTABLISHED,
-	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_SHUTDOWN_SENT,
-	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_SHUTDOWN_RECD,
-	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT,
-	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_HEARTBEAT_SENT,
-	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_HEARTBEAT_ACKED,
-	NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_DATA_SENT,
 #endif
 #ifdef CONFIG_NF_CT_PROTO_DCCP
 	NF_SYSCTL_CT_PROTO_TIMEOUT_DCCP_REQUEST,
@@ -839,20 +831,8 @@ static struct ctl_table nf_ct_sysctl_table[] = {
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 #ifdef CONFIG_NF_CT_PROTO_SCTP
-	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_CLOSED] = {
-		.procname	= "nf_conntrack_sctp_timeout_closed",
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_jiffies,
-	},
-	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_COOKIE_WAIT] = {
-		.procname	= "nf_conntrack_sctp_timeout_cookie_wait",
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_jiffies,
-	},
-	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_COOKIE_ECHOED] = {
-		.procname	= "nf_conntrack_sctp_timeout_cookie_echoed",
+	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_OPEN_WAIT] = {
+		.procname	= "nf_conntrack_sctp_timeout_open_wait",
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
@@ -863,42 +843,6 @@ static struct ctl_table nf_ct_sysctl_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_SHUTDOWN_SENT] = {
-		.procname	= "nf_conntrack_sctp_timeout_shutdown_sent",
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_jiffies,
-	},
-	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_SHUTDOWN_RECD] = {
-		.procname	= "nf_conntrack_sctp_timeout_shutdown_recd",
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_jiffies,
-	},
-	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT] = {
-		.procname	= "nf_conntrack_sctp_timeout_shutdown_ack_sent",
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_jiffies,
-	},
-	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_HEARTBEAT_SENT] = {
-		.procname	= "nf_conntrack_sctp_timeout_heartbeat_sent",
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_jiffies,
-	},
-	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_HEARTBEAT_ACKED] = {
-		.procname       = "nf_conntrack_sctp_timeout_heartbeat_acked",
-		.maxlen         = sizeof(unsigned int),
-		.mode           = 0644,
-		.proc_handler   = proc_dointvec_jiffies,
-	},
-	[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_DATA_SENT] = {
-		.procname       = "nf_conntrack_sctp_timeout_data_sent",
-		.maxlen         = sizeof(unsigned int),
-		.mode           = 0644,
-		.proc_handler   = proc_dointvec_jiffies,
-	},
 #endif
 #ifdef CONFIG_NF_CT_PROTO_DCCP
 	[NF_SYSCTL_CT_PROTO_TIMEOUT_DCCP_REQUEST] = {
@@ -1034,16 +978,8 @@ static void nf_conntrack_standalone_init_sctp_sysctl(struct net *net,
 	table[NF_SYSCTL_CT_PROTO_TIMEOUT_SCTP_ ## XNAME].data = \
 			&(sn)->timeouts[SCTP_CONNTRACK_ ## XNAME]
 
-	XASSIGN(CLOSED, sn);
-	XASSIGN(COOKIE_WAIT, sn);
-	XASSIGN(COOKIE_ECHOED, sn);
+	XASSIGN(OPEN_WAIT, sn);
 	XASSIGN(ESTABLISHED, sn);
-	XASSIGN(SHUTDOWN_SENT, sn);
-	XASSIGN(SHUTDOWN_RECD, sn);
-	XASSIGN(SHUTDOWN_ACK_SENT, sn);
-	XASSIGN(HEARTBEAT_SENT, sn);
-	XASSIGN(HEARTBEAT_ACKED, sn);
-	XASSIGN(DATA_SENT, sn);
 #undef XASSIGN
 #endif
 }
-- 
2.34.1

Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Florian Westphal]

Sriram Yagnaraman <sriram.yagnaraman@est.tech> wrote:
> All the paths in an SCTP connection are kept alive either by actual
> DATA/SACK running through the connection or by HEARTBEAT. This patch
> proposes a simple state machine with only two states OPEN_WAIT and
> ESTABLISHED (similar to UDP). The reason for this change is a full
> stateful approach to SCTP is difficult when the association is
> multihomed since the endpoints could use different paths in the network
> during the lifetime of an association.
> 
> Default timeouts are:
> OPEN_WAIT:   3 seconds   (rto_initial)
> ESTABLISHED: 210 seconds (rto_max + hb_interval * path_max_retrans)
> 
> Important changes/notes
> - Timeout is used to clean up conntrack entries
> - VTAG checks are kept as is (can be moved to a conntrack extension if
>   desired)
> - SCTP chunks are parsed only once, and a map is populated with the
>   information on the chunks present in the packet
> - ASSURED bit is NOT set in this version of the patch, need help
>   understanding when to set it
> 
> Note that this patch has changed uapi headers.

Don't do that please, this will cause trouble.

> Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> ---
>  .../uapi/linux/netfilter/nf_conntrack_sctp.h  |  10 +-
>  .../linux/netfilter/nfnetlink_cttimeout.h     |  10 +-
>  net/netfilter/nf_conntrack_proto_sctp.c       | 589 ++++--------------
>  net/netfilter/nf_conntrack_standalone.c       |  72 +--
>  4 files changed, 143 insertions(+), 538 deletions(-)
> 
> diff --git a/include/uapi/linux/netfilter/nf_conntrack_sctp.h b/include/uapi/linux/netfilter/nf_conntrack_sctp.h
> index c742469afe21..89381a57021a 100644
> --- a/include/uapi/linux/netfilter/nf_conntrack_sctp.h
> +++ b/include/uapi/linux/netfilter/nf_conntrack_sctp.h
> @@ -7,16 +7,8 @@
>  
>  enum sctp_conntrack {
>  	SCTP_CONNTRACK_NONE,
> -	SCTP_CONNTRACK_CLOSED,
> -	SCTP_CONNTRACK_COOKIE_WAIT,
> -	SCTP_CONNTRACK_COOKIE_ECHOED,
> +	SCTP_CONNTRACK_OPEN_WAIT,
>  	SCTP_CONNTRACK_ESTABLISHED,
> -	SCTP_CONNTRACK_SHUTDOWN_SENT,
> -	SCTP_CONNTRACK_SHUTDOWN_RECD,
> -	SCTP_CONNTRACK_SHUTDOWN_ACK_SENT,
> -	SCTP_CONNTRACK_HEARTBEAT_SENT,
> -	SCTP_CONNTRACK_HEARTBEAT_ACKED,
> -	SCTP_CONNTRACK_DATA_SENT,
>  	SCTP_CONNTRACK_MAX

Please keep all as-is.

You might want to add a /* no loner used */ or similar.

You could hijack an existing enum to avoid adding a new one:

SCTP_CONNTRACK_OPEN_WAIT = SCTP_CONNTRACK_COOKIE_WAIT,

> diff --git a/include/uapi/linux/netfilter/nfnetlink_cttimeout.h b/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
> index 94e74034706d..372dfe7c07ed 100644
> --- a/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
> +++ b/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
> @@ -86,16 +86,8 @@ enum ctattr_timeout_dccp {
>  
>  enum ctattr_timeout_sctp {
>  	CTA_TIMEOUT_SCTP_UNSPEC,
> -	CTA_TIMEOUT_SCTP_CLOSED,
> -	CTA_TIMEOUT_SCTP_COOKIE_WAIT,
> -	CTA_TIMEOUT_SCTP_COOKIE_ECHOED,
> +	CTA_TIMEOUT_SCTP_OPEN_WAIT,
>  	CTA_TIMEOUT_SCTP_ESTABLISHED,
> -	CTA_TIMEOUT_SCTP_SHUTDOWN_SENT,
> -	CTA_TIMEOUT_SCTP_SHUTDOWN_RECD,
> -	CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT,
> -	CTA_TIMEOUT_SCTP_HEARTBEAT_SENT,
> -	CTA_TIMEOUT_SCTP_HEARTBEAT_ACKED,
> -	CTA_TIMEOUT_SCTP_DATA_SENT,
>  	__CTA_TIMEOUT_SCTP_MAX

Same, this is frozen, you can add to it but you
cannot remove this.

You can add a kernel internal enum if you like, to replace the existing
ones, with kernel mapping the new ones to old (and ignoring the old ones
on input from userspace).

This would allow to shrink struct nf_sctp_net size for example.

>  #define CTA_TIMEOUT_SCTP_MAX (__CTA_TIMEOUT_SCTP_MAX - 1)
> diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
> index d88b92a8ffca..d79ed476b764 100644
> --- a/net/netfilter/nf_conntrack_proto_sctp.c
> +++ b/net/netfilter/nf_conntrack_proto_sctp.c
> @@ -5,12 +5,13 @@
>   * Copyright (c) 2004 Kiran Kumar Immidi <immidi_kiran@yahoo.com>
>   * Copyright (c) 2004-2012 Patrick McHardy <kaber@trash.net>
>   *
> - * SCTP is defined in RFC 2960. References to various sections in this code
> + * SCTP is defined in RFC 4960. References to various sections in this code
>   * are to this RFC.
>   */
>  
>  #include <linux/types.h>
>  #include <linux/timer.h>
> +#include <linux/jiffies.h>
>  #include <linux/netfilter.h>
>  #include <linux/in.h>
>  #include <linux/ip.h>
> @@ -27,127 +28,19 @@
>  #include <net/netfilter/nf_conntrack_ecache.h>
>  #include <net/netfilter/nf_conntrack_timeout.h>
>  
> -/* FIXME: Examine ipfilter's timeouts and conntrack transitions more
> -   closely.  They're more complex. --RR
> -
> -   And so for me for SCTP :D -Kiran */
> +#define	SCTP_FLAG_HEARTBEAT_VTAG_FAILED	1
>  
>  static const char *const sctp_conntrack_names[] = {
>  	"NONE",
> -	"CLOSED",
> -	"COOKIE_WAIT",
> -	"COOKIE_ECHOED",
> +	"OPEN_WAIT",
>  	"ESTABLISHED",
> -	"SHUTDOWN_SENT",
> -	"SHUTDOWN_RECD",
> -	"SHUTDOWN_ACK_SENT",
> -	"HEARTBEAT_SENT",
> -	"HEARTBEAT_ACKED",
>  };

> -	}
> +	[SCTP_CONNTRACK_OPEN_WAIT]			= 3 SECS,
> +	[SCTP_CONNTRACK_ESTABLISHED]		= 210 SECS,
>  };
  
>  
> +#define for_each_sctp_chunk(skb, sch, _sch, offset, dataoff, count)	\
> +for ((offset) = (dataoff) + sizeof(struct sctphdr), (count) = 0;	\
> +	(offset) < (skb)->len &&					\

I think skb_header_pointer() will return NULL if offset + sizeof(_sch)
exceeds skb->len, so this offset < skb->len test is redundant.

> +	(offset) += (ntohs((sch)->length) + 3) & ~3, (count)++)

What if sch->length == 0?

> +	for_each_sctp_chunk (skb, sch, _sch, offset, dataoff, count) {
> +		pr_debug("Chunk Num: %d  Type: %d\n", count, sch->type);

Is this pr_debug() needed?  Its pretty useless because it would print
for every packet (its not an error path).

> +		set_bit(sch->type, map);
>  
> -	if (do_basic_checks(ct, skb, dataoff, map) != 0)
> -		goto out;
> +		if (sch->type == SCTP_CID_INIT ||
> +			sch->type == SCTP_CID_INIT_ACK) {
> +			struct sctp_inithdr _inith, *inith;
> +			inith = skb_header_pointer(skb, offset + sizeof(_sch),
> +						sizeof(_inith), &_inith);
> +			if (inith)
> +				init_vtag = inith->init_tag;
> +			else
> +				goto out_drop;

			if (!inith)
				goto out_drop;

			init_vtag = inith->init_tag;

Also, please run your patch through scripts/checkpatch.pl script, I'm
sure there are several coding style warnings here.

> +	spin_lock_bh(&ct->lock);

Why is this spinlock needed?

>  	if (!nf_ct_is_confirmed(ct)) {
>  		/* If an OOTB packet has any of these chunks discard (Sec 8.4) */
>  		if (test_bit(SCTP_CID_ABORT, map) ||
>  		    test_bit(SCTP_CID_SHUTDOWN_COMPLETE, map) ||
>  		    test_bit(SCTP_CID_COOKIE_ACK, map))
> -			return -NF_ACCEPT;
> +			goto out_unlock;
>  
> -		if (!sctp_new(ct, skb, sh, dataoff))
> -			return -NF_ACCEPT;

Any reason for deleting sctp_new()?
It makes this body a lot larger, the lines below could have been done in
sctp_new().

> +		memset(&ct->proto.sctp, 0, sizeof(ct->proto.sctp));
> +		ct->proto.sctp.state = SCTP_CONNTRACK_OPEN_WAIT;
> +		nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
> +
> +		if (test_bit(SCTP_CID_INIT, map))
> +			ct->proto.sctp.vtag[!dir] = init_vtag;
> +		else if (test_bit(SCTP_CID_SHUTDOWN_ACK, map))
> +			/* If it is a shutdown ack OOTB packet, we expect a return
> +			shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8) */
> +			ct->proto.sctp.vtag[!dir] = sctph->vtag;
> +		else
> +			ct->proto.sctp.vtag[dir] = sctph->vtag;

Maybe the else branch below can be elided by adding a
goto here?

AFAICS the spinlock is only needed for some parts of the else branch,
so the spin_lock_bh can be moved.
> +		/* we have seen traffic both ways, go to established */
> +		if (dir == IP_CT_DIR_REPLY &&
> +			ct->proto.sctp.state == SCTP_CONNTRACK_OPEN_WAIT) {
> +			ct->proto.sctp.state = SCTP_CONNTRACK_ESTABLISHED;
> +			nf_conntrack_event_cache(IPCT_PROTOINFO, ct);

> +	/* Check the verification tag (Sec 8.5) */
> +	if (!test_bit(SCTP_CID_INIT, map) &&
> +		!test_bit(SCTP_CID_SHUTDOWN_COMPLETE, map) &&
> +		!test_bit(SCTP_CID_COOKIE_ECHO, map) &&
> +		!test_bit(SCTP_CID_ABORT, map) &&
> +		!test_bit(SCTP_CID_SHUTDOWN_ACK, map) &&
> +		!test_bit(SCTP_CID_HEARTBEAT, map) &&
> +		!test_bit(SCTP_CID_HEARTBEAT_ACK, map) &&
> +		sctph->vtag != ct->proto.sctp.vtag[dir]) {
> +		pr_debug("Verification tag check failed\n");

Please have a look at
https://patchwork.ozlabs.org/project/netfilter-devel/patch/20230102114612.15860-2-fw@strlen.de/

I hope it will be applied shortly so you can rebase.
I don't have any other sctp patches.

This should be
nf_ct_l4proto_log_invalid(skb, ct, state,
			  "verification tag check failed %x vs %x for dir %d",
			  sh->vtag, ct->proto.sctp.vtag[dir], dir);

instead of pr_debug().

> +	/* Special cases of Verification tag check (Sec 8.5.1) */

Please extend the comments a bit so I don't have to look at the RFC
while reviewing, just quote the relevant part, i.e.

> +	if (test_bit(SCTP_CID_INIT, map)) {
> +		/* Sec 8.5.1 (A) */
> +		if (sctph->vtag != 0)
>  			goto out_unlock;
> -		}

if (sctph->vtag != 0) /* A) init vtag MUST be 0 */
	goto out_unlock;

> +		else if (nf_ct_is_confirmed(ct))

No need to 'else if', just use 'if'.

> +	/* Need some thought on how to set the assured bit */
> +	// if (dir == IP_CT_DIR_REPLY &&
> +	// 	!(test_bit(IPS_ASSURED_BIT, &ct->status))) {
> +	// 	  set_bit(IPS_ASSURED_BIT, &ct->status);
> +	// 	  nf_conntrack_event_cache(IPCT_ASSURED, ct);

Probably do a test_and_set_bit() when the connection switches to
ESTABLISHED?

>  sctp_timeout_nla_policy[CTA_TIMEOUT_SCTP_MAX+1] = {
> -	[CTA_TIMEOUT_SCTP_CLOSED]		= { .type = NLA_U32 },
> -	[CTA_TIMEOUT_SCTP_COOKIE_WAIT]		= { .type = NLA_U32 },
> -	[CTA_TIMEOUT_SCTP_COOKIE_ECHOED]	= { .type = NLA_U32 },
> +	[CTA_TIMEOUT_SCTP_OPEN_WAIT]		= { .type = NLA_U32 },
>  	[CTA_TIMEOUT_SCTP_ESTABLISHED]		= { .type = NLA_U32 },
> -	[CTA_TIMEOUT_SCTP_SHUTDOWN_SENT]	= { .type = NLA_U32 },
> -	[CTA_TIMEOUT_SCTP_SHUTDOWN_RECD]	= { .type = NLA_U32 },
> -	[CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT]	= { .type = NLA_U32 },
> -	[CTA_TIMEOUT_SCTP_HEARTBEAT_SENT]	= { .type = NLA_U32 },
> -	[CTA_TIMEOUT_SCTP_HEARTBEAT_ACKED]	= { .type = NLA_U32 },
> -	[CTA_TIMEOUT_SCTP_DATA_SENT]		= { .type = NLA_U32 },

Please retain this as-is for now.

I'm fine with removing the sysctls though.

RE: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Sriram Yagnaraman]

> -----Original Message-----
> From: Florian Westphal <fw@strlen.de>
> Sent: Wednesday, 4 January 2023 13:41
> To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> <lxin@redhat.com>
> Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> 
> Sriram Yagnaraman <sriram.yagnaraman@est.tech> wrote:
> > All the paths in an SCTP connection are kept alive either by actual
> > DATA/SACK running through the connection or by HEARTBEAT. This patch
> > proposes a simple state machine with only two states OPEN_WAIT and
> > ESTABLISHED (similar to UDP). The reason for this change is a full
> > stateful approach to SCTP is difficult when the association is
> > multihomed since the endpoints could use different paths in the
> > network during the lifetime of an association.
> >
> > Default timeouts are:
> > OPEN_WAIT:   3 seconds   (rto_initial)
> > ESTABLISHED: 210 seconds (rto_max + hb_interval * path_max_retrans)
> >
> > Important changes/notes
> > - Timeout is used to clean up conntrack entries
> > - VTAG checks are kept as is (can be moved to a conntrack extension if
> >   desired)
> > - SCTP chunks are parsed only once, and a map is populated with the
> >   information on the chunks present in the packet
> > - ASSURED bit is NOT set in this version of the patch, need help
> >   understanding when to set it
> >
> > Note that this patch has changed uapi headers.
> 
> Don't do that please, this will cause trouble.

Yes, I understand, will remove the changes and reuse COOKIE_WAIT value for OPEN_WAIT.

> 
> > Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > ---
> >  .../uapi/linux/netfilter/nf_conntrack_sctp.h  |  10 +-
> >  .../linux/netfilter/nfnetlink_cttimeout.h     |  10 +-
> >  net/netfilter/nf_conntrack_proto_sctp.c       | 589 ++++--------------
> >  net/netfilter/nf_conntrack_standalone.c       |  72 +--
> >  4 files changed, 143 insertions(+), 538 deletions(-)
> >
> > diff --git a/include/uapi/linux/netfilter/nf_conntrack_sctp.h
> > b/include/uapi/linux/netfilter/nf_conntrack_sctp.h
> > index c742469afe21..89381a57021a 100644
> > --- a/include/uapi/linux/netfilter/nf_conntrack_sctp.h
> > +++ b/include/uapi/linux/netfilter/nf_conntrack_sctp.h
> > @@ -7,16 +7,8 @@
> >
> >  enum sctp_conntrack {
> >  	SCTP_CONNTRACK_NONE,
> > -	SCTP_CONNTRACK_CLOSED,
> > -	SCTP_CONNTRACK_COOKIE_WAIT,
> > -	SCTP_CONNTRACK_COOKIE_ECHOED,
> > +	SCTP_CONNTRACK_OPEN_WAIT,
> >  	SCTP_CONNTRACK_ESTABLISHED,
> > -	SCTP_CONNTRACK_SHUTDOWN_SENT,
> > -	SCTP_CONNTRACK_SHUTDOWN_RECD,
> > -	SCTP_CONNTRACK_SHUTDOWN_ACK_SENT,
> > -	SCTP_CONNTRACK_HEARTBEAT_SENT,
> > -	SCTP_CONNTRACK_HEARTBEAT_ACKED,
> > -	SCTP_CONNTRACK_DATA_SENT,
> >  	SCTP_CONNTRACK_MAX
> 
> Please keep all as-is.
> 
> You might want to add a /* no loner used */ or similar.
> 
> You could hijack an existing enum to avoid adding a new one:
> 
> SCTP_CONNTRACK_OPEN_WAIT = SCTP_CONNTRACK_COOKIE_WAIT,
> 
> > diff --git a/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
> > b/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
> > index 94e74034706d..372dfe7c07ed 100644
> > --- a/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
> > +++ b/include/uapi/linux/netfilter/nfnetlink_cttimeout.h
> > @@ -86,16 +86,8 @@ enum ctattr_timeout_dccp {
> >
> >  enum ctattr_timeout_sctp {
> >  	CTA_TIMEOUT_SCTP_UNSPEC,
> > -	CTA_TIMEOUT_SCTP_CLOSED,
> > -	CTA_TIMEOUT_SCTP_COOKIE_WAIT,
> > -	CTA_TIMEOUT_SCTP_COOKIE_ECHOED,
> > +	CTA_TIMEOUT_SCTP_OPEN_WAIT,
> >  	CTA_TIMEOUT_SCTP_ESTABLISHED,
> > -	CTA_TIMEOUT_SCTP_SHUTDOWN_SENT,
> > -	CTA_TIMEOUT_SCTP_SHUTDOWN_RECD,
> > -	CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT,
> > -	CTA_TIMEOUT_SCTP_HEARTBEAT_SENT,
> > -	CTA_TIMEOUT_SCTP_HEARTBEAT_ACKED,
> > -	CTA_TIMEOUT_SCTP_DATA_SENT,
> >  	__CTA_TIMEOUT_SCTP_MAX
> 
> Same, this is frozen, you can add to it but you cannot remove this.
> 
> You can add a kernel internal enum if you like, to replace the existing ones,
> with kernel mapping the new ones to old (and ignoring the old ones on input
> from userspace).
> 
> This would allow to shrink struct nf_sctp_net size for example.
> 
> >  #define CTA_TIMEOUT_SCTP_MAX (__CTA_TIMEOUT_SCTP_MAX - 1) diff --
> git
> > a/net/netfilter/nf_conntrack_proto_sctp.c
> > b/net/netfilter/nf_conntrack_proto_sctp.c
> > index d88b92a8ffca..d79ed476b764 100644
> > --- a/net/netfilter/nf_conntrack_proto_sctp.c
> > +++ b/net/netfilter/nf_conntrack_proto_sctp.c
> > @@ -5,12 +5,13 @@
> >   * Copyright (c) 2004 Kiran Kumar Immidi <immidi_kiran@yahoo.com>
> >   * Copyright (c) 2004-2012 Patrick McHardy <kaber@trash.net>
> >   *
> > - * SCTP is defined in RFC 2960. References to various sections in
> > this code
> > + * SCTP is defined in RFC 4960. References to various sections in
> > + this code
> >   * are to this RFC.
> >   */
> >
> >  #include <linux/types.h>
> >  #include <linux/timer.h>
> > +#include <linux/jiffies.h>
> >  #include <linux/netfilter.h>
> >  #include <linux/in.h>
> >  #include <linux/ip.h>
> > @@ -27,127 +28,19 @@
> >  #include <net/netfilter/nf_conntrack_ecache.h>
> >  #include <net/netfilter/nf_conntrack_timeout.h>
> >
> > -/* FIXME: Examine ipfilter's timeouts and conntrack transitions more
> > -   closely.  They're more complex. --RR
> > -
> > -   And so for me for SCTP :D -Kiran */
> > +#define	SCTP_FLAG_HEARTBEAT_VTAG_FAILED	1
> >
> >  static const char *const sctp_conntrack_names[] = {
> >  	"NONE",
> > -	"CLOSED",
> > -	"COOKIE_WAIT",
> > -	"COOKIE_ECHOED",
> > +	"OPEN_WAIT",
> >  	"ESTABLISHED",
> > -	"SHUTDOWN_SENT",
> > -	"SHUTDOWN_RECD",
> > -	"SHUTDOWN_ACK_SENT",
> > -	"HEARTBEAT_SENT",
> > -	"HEARTBEAT_ACKED",
> >  };
> 
> > -	}
> > +	[SCTP_CONNTRACK_OPEN_WAIT]			= 3 SECS,
> > +	[SCTP_CONNTRACK_ESTABLISHED]		= 210 SECS,
> >  };
> 
> >
> > +#define for_each_sctp_chunk(skb, sch, _sch, offset, dataoff, count)	\
> > +for ((offset) = (dataoff) + sizeof(struct sctphdr), (count) = 0;	\
> > +	(offset) < (skb)->len &&					\
> 
> I think skb_header_pointer() will return NULL if offset + sizeof(_sch) exceeds
> skb->len, so this offset < skb->len test is redundant.
> 
> > +	(offset) += (ntohs((sch)->length) + 3) & ~3, (count)++)
> 
> What if sch->length == 0?

Oops, infinite loop. I will fix it.

> 
> > +	for_each_sctp_chunk (skb, sch, _sch, offset, dataoff, count) {
> > +		pr_debug("Chunk Num: %d  Type: %d\n", count, sch->type);
> 
> Is this pr_debug() needed?  Its pretty useless because it would print for every
> packet (its not an error path).

Removed now.

> 
> > +		set_bit(sch->type, map);
> >
> > -	if (do_basic_checks(ct, skb, dataoff, map) != 0)
> > -		goto out;
> > +		if (sch->type == SCTP_CID_INIT ||
> > +			sch->type == SCTP_CID_INIT_ACK) {
> > +			struct sctp_inithdr _inith, *inith;
> > +			inith = skb_header_pointer(skb, offset + sizeof(_sch),
> > +						sizeof(_inith), &_inith);
> > +			if (inith)
> > +				init_vtag = inith->init_tag;
> > +			else
> > +				goto out_drop;
> 
> 			if (!inith)
> 				goto out_drop;
> 
> 			init_vtag = inith->init_tag;
> 
> Also, please run your patch through scripts/checkpatch.pl script, I'm sure
> there are several coding style warnings here.
> 
> > +	spin_lock_bh(&ct->lock);
> 
> Why is this spinlock needed?

I have reworked the code a bit now, and will use the spinlock only for the parts that write to ct.

> 
> >  	if (!nf_ct_is_confirmed(ct)) {
> >  		/* If an OOTB packet has any of these chunks discard (Sec 8.4)
> */
> >  		if (test_bit(SCTP_CID_ABORT, map) ||
> >  		    test_bit(SCTP_CID_SHUTDOWN_COMPLETE, map) ||
> >  		    test_bit(SCTP_CID_COOKIE_ACK, map))
> > -			return -NF_ACCEPT;
> > +			goto out_unlock;
> >
> > -		if (!sctp_new(ct, skb, sh, dataoff))
> > -			return -NF_ACCEPT;
> 
> Any reason for deleting sctp_new()?
> It makes this body a lot larger, the lines below could have been done in
> sctp_new().

I will bring back sctp_new() and move vtag checks into its own function sctp_vtag_check().

> 
> > +		memset(&ct->proto.sctp, 0, sizeof(ct->proto.sctp));
> > +		ct->proto.sctp.state = SCTP_CONNTRACK_OPEN_WAIT;
> > +		nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
> > +
> > +		if (test_bit(SCTP_CID_INIT, map))
> > +			ct->proto.sctp.vtag[!dir] = init_vtag;
> > +		else if (test_bit(SCTP_CID_SHUTDOWN_ACK, map))
> > +			/* If it is a shutdown ack OOTB packet, we expect a
> return
> > +			shutdown complete, otherwise an ABORT Sec 8.4 (5)
> and (8) */
> > +			ct->proto.sctp.vtag[!dir] = sctph->vtag;
> > +		else
> > +			ct->proto.sctp.vtag[dir] = sctph->vtag;
> 
> Maybe the else branch below can be elided by adding a goto here?
> 
> AFAICS the spinlock is only needed for some parts of the else branch, so the
> spin_lock_bh can be moved.
> > +		/* we have seen traffic both ways, go to established */
> > +		if (dir == IP_CT_DIR_REPLY &&
> > +			ct->proto.sctp.state ==
> SCTP_CONNTRACK_OPEN_WAIT) {
> > +			ct->proto.sctp.state =
> SCTP_CONNTRACK_ESTABLISHED;
> > +			nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
> 
> > +	/* Check the verification tag (Sec 8.5) */
> > +	if (!test_bit(SCTP_CID_INIT, map) &&
> > +		!test_bit(SCTP_CID_SHUTDOWN_COMPLETE, map) &&
> > +		!test_bit(SCTP_CID_COOKIE_ECHO, map) &&
> > +		!test_bit(SCTP_CID_ABORT, map) &&
> > +		!test_bit(SCTP_CID_SHUTDOWN_ACK, map) &&
> > +		!test_bit(SCTP_CID_HEARTBEAT, map) &&
> > +		!test_bit(SCTP_CID_HEARTBEAT_ACK, map) &&
> > +		sctph->vtag != ct->proto.sctp.vtag[dir]) {
> > +		pr_debug("Verification tag check failed\n");
> 
> Please have a look at
> https://patchwork.ozlabs.org/project/netfilter-
> devel/patch/20230102114612.15860-2-fw@strlen.de/
> 
> I hope it will be applied shortly so you can rebase.
> I don't have any other sctp patches.
> 
> This should be
> nf_ct_l4proto_log_invalid(skb, ct, state,
> 			  "verification tag check failed %x vs %x for dir %d",
> 			  sh->vtag, ct->proto.sctp.vtag[dir], dir);
> 
> instead of pr_debug().

Yes, will do. Will also remove other pr_debug() if any.

> 
> > +	/* Special cases of Verification tag check (Sec 8.5.1) */
> 
> Please extend the comments a bit so I don't have to look at the RFC while
> reviewing, just quote the relevant part, i.e.
> 
> > +	if (test_bit(SCTP_CID_INIT, map)) {
> > +		/* Sec 8.5.1 (A) */
> > +		if (sctph->vtag != 0)
> >  			goto out_unlock;
> > -		}
> 
> if (sctph->vtag != 0) /* A) init vtag MUST be 0 */
> 	goto out_unlock;
> ö
> > +		else if (nf_ct_is_confirmed(ct))
> 
> No need to 'else if', just use 'if'.
> 
> > +	/* Need some thought on how to set the assured bit */
> > +	// if (dir == IP_CT_DIR_REPLY &&
> > +	// 	!(test_bit(IPS_ASSURED_BIT, &ct->status))) {
> > +	// 	  set_bit(IPS_ASSURED_BIT, &ct->status);
> > +	// 	  nf_conntrack_event_cache(IPCT_ASSURED, ct);
> 
> Probably do a test_and_set_bit() when the connection switches to
> ESTABLISHED?

Ok, makes sense.

> 
> >  sctp_timeout_nla_policy[CTA_TIMEOUT_SCTP_MAX+1] = {
> > -	[CTA_TIMEOUT_SCTP_CLOSED]		= { .type = NLA_U32 },
> > -	[CTA_TIMEOUT_SCTP_COOKIE_WAIT]		= { .type = NLA_U32 },
> > -	[CTA_TIMEOUT_SCTP_COOKIE_ECHOED]	= { .type = NLA_U32 },
> > +	[CTA_TIMEOUT_SCTP_OPEN_WAIT]		= { .type = NLA_U32 },
> >  	[CTA_TIMEOUT_SCTP_ESTABLISHED]		= { .type = NLA_U32 },
> > -	[CTA_TIMEOUT_SCTP_SHUTDOWN_SENT]	= { .type = NLA_U32 },
> > -	[CTA_TIMEOUT_SCTP_SHUTDOWN_RECD]	= { .type = NLA_U32 },
> > -	[CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT]	= { .type = NLA_U32 },
> > -	[CTA_TIMEOUT_SCTP_HEARTBEAT_SENT]	= { .type = NLA_U32 },
> > -	[CTA_TIMEOUT_SCTP_HEARTBEAT_ACKED]	= { .type = NLA_U32 },
> > -	[CTA_TIMEOUT_SCTP_DATA_SENT]		= { .type = NLA_U32 },
> 
> Please retain this as-is for now.
> 
> I'm fine with removing the sysctls though.

Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Pablo Neira Ayuso]

On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman wrote:
> All the paths in an SCTP connection are kept alive either by actual
> DATA/SACK running through the connection or by HEARTBEAT. This patch
> proposes a simple state machine with only two states OPEN_WAIT and
> ESTABLISHED (similar to UDP). The reason for this change is a full
> stateful approach to SCTP is difficult when the association is
> multihomed since the endpoints could use different paths in the network
> during the lifetime of an association.

Do you mean the router/firewall might not see all packets for
association is multihomed?

Could you please provide an example?

RE: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Sriram Yagnaraman]

> -----Original Message-----
> From: Pablo Neira Ayuso <pablo@netfilter.org>
> Sent: Wednesday, 4 January 2023 16:02
> To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> <lxin@redhat.com>
> Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> 
> On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman wrote:
> > All the paths in an SCTP connection are kept alive either by actual
> > DATA/SACK running through the connection or by HEARTBEAT. This patch
> > proposes a simple state machine with only two states OPEN_WAIT and
> > ESTABLISHED (similar to UDP). The reason for this change is a full
> > stateful approach to SCTP is difficult when the association is
> > multihomed since the endpoints could use different paths in the
> > network during the lifetime of an association.
> 
> Do you mean the router/firewall might not see all packets for association is
> multihomed?
> 
> Could you please provide an example?

Let's say the primary and alternate/secondary paths between the SCTP endpoints traverse different middle boxes. 
If an SCTP endpoint detects network failure on the primary path, it will switch to using the secondary path and all subsequent packets will not be seen by the middlebox on the primary path, including SHUTDOWN sequences if they happen at that time.

Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Pablo Neira Ayuso]

On Thu, Jan 05, 2023 at 11:41:13AM +0000, Sriram Yagnaraman wrote:
> > -----Original Message-----
> > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > Sent: Wednesday, 4 January 2023 16:02
> > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> > Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> > <lxin@redhat.com>
> > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> > 
> > On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman wrote:
> > > All the paths in an SCTP connection are kept alive either by actual
> > > DATA/SACK running through the connection or by HEARTBEAT. This patch
> > > proposes a simple state machine with only two states OPEN_WAIT and
> > > ESTABLISHED (similar to UDP). The reason for this change is a full
> > > stateful approach to SCTP is difficult when the association is
> > > multihomed since the endpoints could use different paths in the
> > > network during the lifetime of an association.
> > 
> > Do you mean the router/firewall might not see all packets for association is
> > multihomed?
> > 
> > Could you please provide an example?
> 
> Let's say the primary and alternate/secondary paths between the SCTP
> endpoints traverse different middle boxes. If an SCTP endpoint
> detects network failure on the primary path, it will switch to using
> the secondary path and all subsequent packets will not be seen by
> the middlebox on the primary path, including SHUTDOWN sequences if
> they happen at that time.

OK, then on the primary middle box the SCTP flow will just timeout?
(because no more packets are seen).

Or the scenario you describe is this? Assuming a middle box that is an
alternate/secondary path, then such middle box (which did not see any
other packets before for this connection) starts seeing packets for
this flow, so packets are dropped by the secondary middle box (which
now became the primary path after the network failure)?

RE: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Sriram Yagnaraman]

> -----Original Message-----
> From: Pablo Neira Ayuso <pablo@netfilter.org>
> Sent: Thursday, 5 January 2023 12:54
> To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> <lxin@redhat.com>; Claudio Porfiri <claudio.porfiri@ericsson.com>
> Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> 
> On Thu, Jan 05, 2023 at 11:41:13AM +0000, Sriram Yagnaraman wrote:
> > > -----Original Message-----
> > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > Sent: Wednesday, 4 January 2023 16:02
> > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>; Long
> > > Xin <lxin@redhat.com>
> > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state
> > > machine
> > >
> > > On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman wrote:
> > > > All the paths in an SCTP connection are kept alive either by
> > > > actual DATA/SACK running through the connection or by HEARTBEAT.
> > > > This patch proposes a simple state machine with only two states
> > > > OPEN_WAIT and ESTABLISHED (similar to UDP). The reason for this
> > > > change is a full stateful approach to SCTP is difficult when the
> > > > association is multihomed since the endpoints could use different
> > > > paths in the network during the lifetime of an association.
> > >
> > > Do you mean the router/firewall might not see all packets for
> > > association is multihomed?
> > >
> > > Could you please provide an example?
> >
> > Let's say the primary and alternate/secondary paths between the SCTP
> > endpoints traverse different middle boxes. If an SCTP endpoint detects
> > network failure on the primary path, it will switch to using the
> > secondary path and all subsequent packets will not be seen by the
> > middlebox on the primary path, including SHUTDOWN sequences if they
> > happen at that time.
> 
> OK, then on the primary middle box the SCTP flow will just timeout?
> (because no more packets are seen).

Yes, they will timeout unless the primary path comes up before the SHUTDOWN sequence. And the default timeout for an ESTABLISHED SCTP connection is 5 days, which is a "long" time to clean-up this entry.

> 
> Or the scenario you describe is this? Assuming a middle box that is an
> alternate/secondary path, then such middle box (which did not see any other
> packets before for this connection) starts seeing packets for this flow, so
> packets are dropped by the secondary middle box (which now became the
> primary path after the network failure)?

With d7ee35190427 ("netfilter: nf_ct_sctp: minimal multihoming support") and bff3d0534804 ("netfilter: conntrack: add sctp DATA_SENT state ") there is some multihoming support, so secondary middleboxes should have an entry already. SCTP endpoints can send packets to secondary transport addresses according to the RFC, and they do path monitoring of secondary paths using HEARTBEAT when needed.

Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Pablo Neira Ayuso]

On Thu, Jan 05, 2023 at 12:11:44PM +0000, Sriram Yagnaraman wrote:
> > -----Original Message-----
> > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > Sent: Thursday, 5 January 2023 12:54
> > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> > Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> > <lxin@redhat.com>; Claudio Porfiri <claudio.porfiri@ericsson.com>
> > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> > 
> > On Thu, Jan 05, 2023 at 11:41:13AM +0000, Sriram Yagnaraman wrote:
> > > > -----Original Message-----
> > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > Sent: Wednesday, 4 January 2023 16:02
> > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>; Long
> > > > Xin <lxin@redhat.com>
> > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state
> > > > machine
> > > >
> > > > On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman wrote:
> > > > > All the paths in an SCTP connection are kept alive either by
> > > > > actual DATA/SACK running through the connection or by HEARTBEAT.
> > > > > This patch proposes a simple state machine with only two states
> > > > > OPEN_WAIT and ESTABLISHED (similar to UDP). The reason for this
> > > > > change is a full stateful approach to SCTP is difficult when the
> > > > > association is multihomed since the endpoints could use different
> > > > > paths in the network during the lifetime of an association.
> > > >
> > > > Do you mean the router/firewall might not see all packets for
> > > > association is multihomed?
> > > >
> > > > Could you please provide an example?
> > >
> > > Let's say the primary and alternate/secondary paths between the SCTP
> > > endpoints traverse different middle boxes. If an SCTP endpoint detects
> > > network failure on the primary path, it will switch to using the
> > > secondary path and all subsequent packets will not be seen by the
> > > middlebox on the primary path, including SHUTDOWN sequences if they
> > > happen at that time.
> > 
> > OK, then on the primary middle box the SCTP flow will just timeout?
> > (because no more packets are seen).
> 
> Yes, they will timeout unless the primary path comes up before the
> SHUTDOWN sequence. And the default timeout for an ESTABLISHED SCTP
> connection is 5 days, which is a "long" time to clean-up this entry.

Does the middle box have a chance to see any packet that provides a
hint to shorten this timeout? no HEARTBEAT packets are seen in this
case on the former primary path?

What I am missing are a more detailed list of issues with the existing
approach. Your patch description says "SCTP tracking with multihoming
is difficult", probably a list of scenarios would help to understand
the motivation to simplify the state machine.

Thanks.

RE: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Sriram Yagnaraman]

> -----Original Message-----
> From: Pablo Neira Ayuso <pablo@netfilter.org>
> Sent: Friday, 6 January 2023 01:50
> To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> <lxin@redhat.com>; Claudio Porfiri <claudio.porfiri@ericsson.com>
> Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> 
> On Thu, Jan 05, 2023 at 12:11:44PM +0000, Sriram Yagnaraman wrote:
> > > -----Original Message-----
> > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > Sent: Thursday, 5 January 2023 12:54
> > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>; Long
> > > Xin <lxin@redhat.com>; Claudio Porfiri
> > > <claudio.porfiri@ericsson.com>
> > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state
> > > machine
> > >
> > > On Thu, Jan 05, 2023 at 11:41:13AM +0000, Sriram Yagnaraman wrote:
> > > > > -----Original Message-----
> > > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > > Sent: Wednesday, 4 January 2023 16:02
> > > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>;
> > > > > Long Xin <lxin@redhat.com>
> > > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp
> > > > > state machine
> > > > >
> > > > > On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman
> wrote:
> > > > > > All the paths in an SCTP connection are kept alive either by
> > > > > > actual DATA/SACK running through the connection or by HEARTBEAT.
> > > > > > This patch proposes a simple state machine with only two
> > > > > > states OPEN_WAIT and ESTABLISHED (similar to UDP). The reason
> > > > > > for this change is a full stateful approach to SCTP is
> > > > > > difficult when the association is multihomed since the
> > > > > > endpoints could use different paths in the network during the lifetime
> of an association.
> > > > >
> > > > > Do you mean the router/firewall might not see all packets for
> > > > > association is multihomed?
> > > > >
> > > > > Could you please provide an example?
> > > >
> > > > Let's say the primary and alternate/secondary paths between the
> > > > SCTP endpoints traverse different middle boxes. If an SCTP
> > > > endpoint detects network failure on the primary path, it will
> > > > switch to using the secondary path and all subsequent packets will
> > > > not be seen by the middlebox on the primary path, including
> > > > SHUTDOWN sequences if they happen at that time.
> > >
> > > OK, then on the primary middle box the SCTP flow will just timeout?
> > > (because no more packets are seen).
> >
> > Yes, they will timeout unless the primary path comes up before the
> > SHUTDOWN sequence. And the default timeout for an ESTABLISHED SCTP
> > connection is 5 days, which is a "long" time to clean-up this entry.
> 
> Does the middle box have a chance to see any packet that provides a hint to
> shorten this timeout? no HEARTBEAT packets are seen in this case on the
> former primary path?

There will be HEARTBEAT as soon as a path becomes unreachable from the SCTP endpoints. But depending on the location of the network failure, the middlebox may or may not see the HEARTBEAT. Also, HEARTBEAT is sent when there are no data to be transmitted or if the path is unreachable/unconfirmed, so I think there is no deterministic way of finding out when to shorten the timeout. Of course, a user has the option of setting the ESTABLISHED state timeout to a more reasonable value, for e.g., same as the HEARTBEAT_ACKED state timeout (210 sec), OR we could reduce the default timeout of ESTABLISHED to 210 sec. 

> 
> What I am missing are a more detailed list of issues with the existing
> approach. Your patch description says "SCTP tracking with multihoming is
> difficult", probably a list of scenarios would help to understand the motivation
> to simplify the state machine.

Thank you for reviewing and asking these questions, it made me step back and think. I list below some background
- I want to simplify the state machine, because it is possible to track an SCTP connection with fewer states, for e.g., SCTP with UDP encapsulation uses UDP conntrack with just UNREPLIED/REPLIED states and it works perfectly fine
- My stakeholders, at the behest of whom I am proposing these changes hit some problems running SCTP client endpoints behind NAT (inside Kubernetes pods) towards multihomed SCTP server endpoints (1a-g) and (2a-c) below
- Some upcoming SCTP protocol changes in IETF (if approved/implemented) will make it hard to read beyond the SCTP common header, for e.g., DTLS over SCTP https://datatracker.ietf.org/doc/draft-ietf-tsvwg-dtls-over-sctp-bis/, proposes to encrypt all SCTP chunks, conntrack will only be able to see SCTP common header, these changes hopefully will make it easier to adapt to such changes in SCTP protocol
- While at it, I also made some other "improvements"
	a) Avoid multiple walk-throughs of SCTP chunks in sctp_new(), sctp_basic_checks() and nf_conntrack_sctp_packet(), and parse it only once
	b) SCTP conntrack has the same state regardless of it is a primary or a secondary path

Let's say there are two SCTP endpoints A and B with addresses A' and B, B'' correspondingly.
Primary path is A' <----> B' that traverses middlebox C, and secondary path is A' <----> B'' that traverses middlebox D.
1) SHUTDOWN sent on secondary path
1a) SCTP endpoint A sets up an association towards SCTP endpoint B
1b) Middlebox C sees INIT sequence and creates "primary" conntrack entry (5 days)
1c) Middlebox D sees HEARTBEAT sequence and creates "secondary" conntrack entry (210 seconds)
1d) Path failure between A and C, and SCTP endpoint A switches to secondary path and continues sending data on the association
1e) SCTP endpoint A decides to SHUTDOWN the connection
1f) Middlebox C is in ESTABLISHED state, doesn't see any SHUTDOWN sequence or HEARTBEAT, waits for timeout (5 days)
1g) Middlebox D is in HEARTBEAT_ACKED state, doesn't care about SHUTDOWN sequence, waits for timeout (210 seconds)

2) Recently fixed by bff3d0534804 ("netfilter: conntrack: add sctp DATA_SENT state ")
2a) SCTP endpoint A sets up an association towards SCTP endpoint B
2b) Middlebox C sees INIT sequence and creates "primary" conntrack entry (5 days)
2c) Middlebox D sees DATA/SACK, and DROPS packets until HEARTBEAT is seen to setup "secondary" conntrack entry (210 seconds)

> 
> Thanks.

Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Marcelo Ricardo Leitner]

On Wed, Jan 11, 2023 at 09:36:38AM +0000, Sriram Yagnaraman wrote:
> > -----Original Message-----
> > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > Sent: Friday, 6 January 2023 01:50
> > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> > Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> > <lxin@redhat.com>; Claudio Porfiri <claudio.porfiri@ericsson.com>
> > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> >
> > On Thu, Jan 05, 2023 at 12:11:44PM +0000, Sriram Yagnaraman wrote:
> > > > -----Original Message-----
> > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > Sent: Thursday, 5 January 2023 12:54
> > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>; Long
> > > > Xin <lxin@redhat.com>; Claudio Porfiri
> > > > <claudio.porfiri@ericsson.com>
> > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state
> > > > machine
> > > >
> > > > On Thu, Jan 05, 2023 at 11:41:13AM +0000, Sriram Yagnaraman wrote:
> > > > > > -----Original Message-----
> > > > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > > > Sent: Wednesday, 4 January 2023 16:02
> > > > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>;
> > > > > > Long Xin <lxin@redhat.com>
> > > > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp
> > > > > > state machine
> > > > > >
> > > > > > On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman
> > wrote:
> > > > > > > All the paths in an SCTP connection are kept alive either by
> > > > > > > actual DATA/SACK running through the connection or by HEARTBEAT.
> > > > > > > This patch proposes a simple state machine with only two
> > > > > > > states OPEN_WAIT and ESTABLISHED (similar to UDP). The reason
> > > > > > > for this change is a full stateful approach to SCTP is
> > > > > > > difficult when the association is multihomed since the
> > > > > > > endpoints could use different paths in the network during the lifetime
> > of an association.
> > > > > >
> > > > > > Do you mean the router/firewall might not see all packets for
> > > > > > association is multihomed?
> > > > > >
> > > > > > Could you please provide an example?
> > > > >
> > > > > Let's say the primary and alternate/secondary paths between the
> > > > > SCTP endpoints traverse different middle boxes. If an SCTP
> > > > > endpoint detects network failure on the primary path, it will
> > > > > switch to using the secondary path and all subsequent packets will
> > > > > not be seen by the middlebox on the primary path, including
> > > > > SHUTDOWN sequences if they happen at that time.
> > > >
> > > > OK, then on the primary middle box the SCTP flow will just timeout?
> > > > (because no more packets are seen).
> > >
> > > Yes, they will timeout unless the primary path comes up before the
> > > SHUTDOWN sequence. And the default timeout for an ESTABLISHED SCTP
> > > connection is 5 days, which is a "long" time to clean-up this entry.
> >
> > Does the middle box have a chance to see any packet that provides a hint to
> > shorten this timeout? no HEARTBEAT packets are seen in this case on the
> > former primary path?
>
> There will be HEARTBEAT as soon as a path becomes unreachable from the SCTP endpoints. But depending on the location of the network failure, the middlebox may or may not see the HEARTBEAT. Also, HEARTBEAT is sent when there are no data to be transmitted or if the path is unreachable/unconfirmed, so I think there is no deterministic way of finding out when to shorten the timeout. Of course, a user has the option of setting the ESTABLISHED state timeout to a more reasonable value, for e.g., same as the HEARTBEAT_ACKED state timeout (210 sec), OR we could reduce the default timeout of ESTABLISHED to 210 sec.
>
> >
> > What I am missing are a more detailed list of issues with the existing
> > approach. Your patch description says "SCTP tracking with multihoming is
> > difficult", probably a list of scenarios would help to understand the motivation
> > to simplify the state machine.
>
> Thank you for reviewing and asking these questions, it made me step back and think. I list below some background
> - I want to simplify the state machine, because it is possible to track an SCTP connection with fewer states, for e.g., SCTP with UDP encapsulation uses UDP conntrack with just UNREPLIED/REPLIED states and it works perfectly fine

[*] (more below)

> - My stakeholders, at the behest of whom I am proposing these changes hit some problems running SCTP client endpoints behind NAT (inside Kubernetes pods) towards multihomed SCTP server endpoints (1a-g) and (2a-c) below
> - Some upcoming SCTP protocol changes in IETF (if approved/implemented) will make it hard to read beyond the SCTP common header, for e.g., DTLS over SCTP https://datatracker.ietf.org/doc/draft-ietf-tsvwg-dtls-over-sctp-bis/, proposes to encrypt all SCTP chunks, conntrack will only be able to see SCTP common header, these changes hopefully will make it easier to adapt to such changes in SCTP protocol

If this is really the case, then I'm confused by this new RFC (be
warned I don't know the gory details of DTLS). I don't see it
specifying that other chunk headers will be encrypted, but instead I
see texts like:

3.7.  Message Sizes

   ...
   The sequence of DTLS records is then fragmented into DATA or I-DATA
   Chunks to fit the path MTU by SCTP.  These changes ensure that DTLS/
   SCTP has the same capability as SCTP to support user messages of any
   size. ...

this is just packing encrypted payload.

Sections 4.1 and 4.5 also lead to that, and:

6.  DTLS over SCTP Service

   The adoption of DTLS over SCTP according to the current specification
   is meant to add to SCTP the option for transferring encrypted data.
   When DTLS over SCTP is used, all data being transferred MUST be
   protected by chunk authentication and DTLS encrypted.

and finally:

9.6.  Privacy Considerations

   For each SCTP user message, the user also provides a stream
   identifier, a flag to indicate whether the message is sent ordered or
   unordered, and a payload protocol identifier.  Although DTLS/SCTP
   provides privacy for the actual user message, the other three
   information fields are not confidentiality protected.  They are sent
   as clear text because they are part of the SCTP DATA chunk header.


So AFAICU the claim here is that a middle box wouldn't be able to
inspect SCTP payload, but the protocol itself is still possible.
Did I miss something maybe?

> - While at it, I also made some other "improvements"
> 	a) Avoid multiple walk-throughs of SCTP chunks in sctp_new(), sctp_basic_checks() and nf_conntrack_sctp_packet(), and parse it only once
> 	b) SCTP conntrack has the same state regardless of it is a primary or a secondary path

This a good change and may, actually, be the core reasoning behind the
change here. 'Primary' is more in the sense of 'active' than anything
else (and it gets more confusing with CMT-SCTP heh). It's not because
a path saw the INIT handshake that it is more reliable and so from
conntrack side.

With that, conntrack handling all paths similarly makes it more
consistent and closer with what the actual SCTP sockets are seeing for
such paths.

One easy example here of a bad situation due to the current difference
between paths is that an application can start an association through
a path and tear it down over another one. There's no shutdown seen by
the first path, and the conntrack entry will be left there af it is
was in Established state for 5 days. (this is also illustrated in
Sriram's example below, just easier to read)

Item I marked with [*] above is vague. You need to consider what it
would be loosing by such simplification and argument that it is okay.
We can't just cut the fat out and pray for the best later on, right?
But with this description here, it not only provides a solid
justification on why it (specificly the new solution) is needed but
also why it is currently already broken/not reliable in multi-homing
setups. Yay! :-)

Then, next question is: would it make sense to keep the current
processing for single path associations? That's a lot of
code/maintenance and I fail to see a reasoning that justifies it.

>
> Let's say there are two SCTP endpoints A and B with addresses A' and B, B'' correspondingly.
> Primary path is A' <----> B' that traverses middlebox C, and secondary path is A' <----> B'' that traverses middlebox D.
> 1) SHUTDOWN sent on secondary path
> 1a) SCTP endpoint A sets up an association towards SCTP endpoint B
> 1b) Middlebox C sees INIT sequence and creates "primary" conntrack entry (5 days)
> 1c) Middlebox D sees HEARTBEAT sequence and creates "secondary" conntrack entry (210 seconds)
> 1d) Path failure between A and C, and SCTP endpoint A switches to secondary path and continues sending data on the association
> 1e) SCTP endpoint A decides to SHUTDOWN the connection
> 1f) Middlebox C is in ESTABLISHED state, doesn't see any SHUTDOWN sequence or HEARTBEAT, waits for timeout (5 days)
> 1g) Middlebox D is in HEARTBEAT_ACKED state, doesn't care about SHUTDOWN sequence, waits for timeout (210 seconds)
>
> 2) Recently fixed by bff3d0534804 ("netfilter: conntrack: add sctp DATA_SENT state ")
> 2a) SCTP endpoint A sets up an association towards SCTP endpoint B
> 2b) Middlebox C sees INIT sequence and creates "primary" conntrack entry (5 days)
> 2c) Middlebox D sees DATA/SACK, and DROPS packets until HEARTBEAT is seen to setup "secondary" conntrack entry (210 seconds)
>
> >
> > Thanks.

RE: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Sriram Yagnaraman]

> -----Original Message-----
> From: Marcelo Ricardo Leitner <mleitner@redhat.com>
> Sent: Wednesday, 11 January 2023 14:54
> To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> Cc: Pablo Neira Ayuso <pablo@netfilter.org>; netfilter-devel@vger.kernel.org;
> Florian Westphal <fw@strlen.de>; Long Xin <lxin@redhat.com>; Claudio
> Porfiri <claudio.porfiri@ericsson.com>
> Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> 
> On Wed, Jan 11, 2023 at 09:36:38AM +0000, Sriram Yagnaraman wrote:
> > > -----Original Message-----
> > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > Sent: Friday, 6 January 2023 01:50
> > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>; Long
> > > Xin <lxin@redhat.com>; Claudio Porfiri
> > > <claudio.porfiri@ericsson.com>
> > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state
> > > machine
> > >
> > > On Thu, Jan 05, 2023 at 12:11:44PM +0000, Sriram Yagnaraman wrote:
> > > > > -----Original Message-----
> > > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > > Sent: Thursday, 5 January 2023 12:54
> > > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>;
> > > > > Long Xin <lxin@redhat.com>; Claudio Porfiri
> > > > > <claudio.porfiri@ericsson.com>
> > > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp
> > > > > state machine
> > > > >
> > > > > On Thu, Jan 05, 2023 at 11:41:13AM +0000, Sriram Yagnaraman wrote:
> > > > > > > -----Original Message-----
> > > > > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > > > > Sent: Wednesday, 4 January 2023 16:02
> > > > > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > > > > <fw@strlen.de>; Marcelo Ricardo Leitner
> > > > > > > <mleitner@redhat.com>; Long Xin <lxin@redhat.com>
> > > > > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp
> > > > > > > state machine
> > > > > > >
> > > > > > > On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman
> > > wrote:
> > > > > > > > All the paths in an SCTP connection are kept alive either
> > > > > > > > by actual DATA/SACK running through the connection or by
> HEARTBEAT.
> > > > > > > > This patch proposes a simple state machine with only two
> > > > > > > > states OPEN_WAIT and ESTABLISHED (similar to UDP). The
> > > > > > > > reason for this change is a full stateful approach to SCTP
> > > > > > > > is difficult when the association is multihomed since the
> > > > > > > > endpoints could use different paths in the network during
> > > > > > > > the lifetime
> > > of an association.
> > > > > > >
> > > > > > > Do you mean the router/firewall might not see all packets
> > > > > > > for association is multihomed?
> > > > > > >
> > > > > > > Could you please provide an example?
> > > > > >
> > > > > > Let's say the primary and alternate/secondary paths between
> > > > > > the SCTP endpoints traverse different middle boxes. If an SCTP
> > > > > > endpoint detects network failure on the primary path, it will
> > > > > > switch to using the secondary path and all subsequent packets
> > > > > > will not be seen by the middlebox on the primary path,
> > > > > > including SHUTDOWN sequences if they happen at that time.
> > > > >
> > > > > OK, then on the primary middle box the SCTP flow will just timeout?
> > > > > (because no more packets are seen).
> > > >
> > > > Yes, they will timeout unless the primary path comes up before the
> > > > SHUTDOWN sequence. And the default timeout for an ESTABLISHED
> SCTP
> > > > connection is 5 days, which is a "long" time to clean-up this entry.
> > >
> > > Does the middle box have a chance to see any packet that provides a
> > > hint to shorten this timeout? no HEARTBEAT packets are seen in this
> > > case on the former primary path?
> >
> > There will be HEARTBEAT as soon as a path becomes unreachable from the
> SCTP endpoints. But depending on the location of the network failure, the
> middlebox may or may not see the HEARTBEAT. Also, HEARTBEAT is sent
> when there are no data to be transmitted or if the path is
> unreachable/unconfirmed, so I think there is no deterministic way of finding
> out when to shorten the timeout. Of course, a user has the option of setting
> the ESTABLISHED state timeout to a more reasonable value, for e.g., same as
> the HEARTBEAT_ACKED state timeout (210 sec), OR we could reduce the
> default timeout of ESTABLISHED to 210 sec.
> >
> > >
> > > What I am missing are a more detailed list of issues with the
> > > existing approach. Your patch description says "SCTP tracking with
> > > multihoming is difficult", probably a list of scenarios would help
> > > to understand the motivation to simplify the state machine.
> >
> > Thank you for reviewing and asking these questions, it made me step
> > back and think. I list below some background
> > - I want to simplify the state machine, because it is possible to
> > track an SCTP connection with fewer states, for e.g., SCTP with UDP
> > encapsulation uses UDP conntrack with just UNREPLIED/REPLIED states
> > and it works perfectly fine
> 
> [*] (more below)
> 
> > - My stakeholders, at the behest of whom I am proposing these changes
> > hit some problems running SCTP client endpoints behind NAT (inside
> > Kubernetes pods) towards multihomed SCTP server endpoints (1a-g) and
> > (2a-c) below
> > - Some upcoming SCTP protocol changes in IETF (if
> > approved/implemented) will make it hard to read beyond the SCTP common
> > header, for e.g., DTLS over SCTP
> > https://datatracker.ietf.org/doc/draft-ietf-tsvwg-dtls-over-sctp-bis/,
> > proposes to encrypt all SCTP chunks, conntrack will only be able to
> > see SCTP common header, these changes hopefully will make it easier to
> > adapt to such changes in SCTP protocol
> 
> If this is really the case, then I'm confused by this new RFC (be warned I don't
> know the gory details of DTLS). I don't see it specifying that other chunk
> headers will be encrypted, but instead I see texts like:
> 
> 3.7.  Message Sizes
> 
>    ...
>    The sequence of DTLS records is then fragmented into DATA or I-DATA
>    Chunks to fit the path MTU by SCTP.  These changes ensure that DTLS/
>    SCTP has the same capability as SCTP to support user messages of any
>    size. ...
> 
> this is just packing encrypted payload.
> 
> Sections 4.1 and 4.5 also lead to that, and:
> 
> 6.  DTLS over SCTP Service
> 
>    The adoption of DTLS over SCTP according to the current specification
>    is meant to add to SCTP the option for transferring encrypted data.
>    When DTLS over SCTP is used, all data being transferred MUST be
>    protected by chunk authentication and DTLS encrypted.
> 
> and finally:
> 
> 9.6.  Privacy Considerations
> 
>    For each SCTP user message, the user also provides a stream
>    identifier, a flag to indicate whether the message is sent ordered or
>    unordered, and a payload protocol identifier.  Although DTLS/SCTP
>    provides privacy for the actual user message, the other three
>    information fields are not confidentiality protected.  They are sent
>    as clear text because they are part of the SCTP DATA chunk header.
> 
> 
> So AFAICU the claim here is that a middle box wouldn't be able to inspect
> SCTP payload, but the protocol itself is still possible.
> Did I miss something maybe?

Okay, my bad for using somebody else's words instead of reading the draft myself. You are right, the proposal is only to apply SCTP-AUTH to all the chunks, it doesn’t propose encryption/confidentiality. 
Anyhow that was just an example of why making a simplified state machine will avoid changing conntrack when the protocol changes are made, especially with the protocol still being actively improved.

> 
> > - While at it, I also made some other "improvements"
> > 	a) Avoid multiple walk-throughs of SCTP chunks in sctp_new(),
> sctp_basic_checks() and nf_conntrack_sctp_packet(), and parse it only once
> > 	b) SCTP conntrack has the same state regardless of it is a primary or
> > a secondary path
> 
> This a good change and may, actually, be the core reasoning behind the
> change here. 'Primary' is more in the sense of 'active' than anything else (and
> it gets more confusing with CMT-SCTP heh). It's not because a path saw the
> INIT handshake that it is more reliable and so from conntrack side.
> 
> With that, conntrack handling all paths similarly makes it more consistent and
> closer with what the actual SCTP sockets are seeing for such paths.
> 

Yes, I agree. 
 
> One easy example here of a bad situation due to the current difference
> between paths is that an application can start an association through a path
> and tear it down over another one. There's no shutdown seen by the first
> path, and the conntrack entry will be left there af it is was in Established state
> for 5 days. (this is also illustrated in Sriram's example below, just easier to
> read)
> 
> Item I marked with [*] above is vague. You need to consider what it would be
> loosing by such simplification and argument that it is okay.
> We can't just cut the fat out and pray for the best later on, right?
> But with this description here, it not only provides a solid justification on why
> it (specificly the new solution) is needed but also why it is currently already
> broken/not reliable in multi-homing setups. Yay! :-)

Agreed, I will update the change log with this description.

> 
> Then, next question is: would it make sense to keep the current processing for
> single path associations? That's a lot of code/maintenance and I fail to see a
> reasoning that justifies it.

I tried to simplify as much as possible, but of course, we can keep some states.
For e.g., keeping SHUTDOWN_* states can reduce the timeout of an ESTABLISHED connection even further. Of course, we will see that only on one of the paths.

> 
> >
> > Let's say there are two SCTP endpoints A and B with addresses A' and B, B''
> correspondingly.
> > Primary path is A' <----> B' that traverses middlebox C, and secondary path is
> A' <----> B'' that traverses middlebox D.
> > 1) SHUTDOWN sent on secondary path
> > 1a) SCTP endpoint A sets up an association towards SCTP endpoint B
> > 1b) Middlebox C sees INIT sequence and creates "primary" conntrack
> > entry (5 days)
> > 1c) Middlebox D sees HEARTBEAT sequence and creates "secondary"
> > conntrack entry (210 seconds)
> > 1d) Path failure between A and C, and SCTP endpoint A switches to
> > secondary path and continues sending data on the association
> > 1e) SCTP endpoint A decides to SHUTDOWN the connection
> > 1f) Middlebox C is in ESTABLISHED state, doesn't see any SHUTDOWN
> > sequence or HEARTBEAT, waits for timeout (5 days)
> > 1g) Middlebox D is in HEARTBEAT_ACKED state, doesn't care about
> > SHUTDOWN sequence, waits for timeout (210 seconds)
> >
> > 2) Recently fixed by bff3d0534804 ("netfilter: conntrack: add sctp
> > DATA_SENT state ")
> > 2a) SCTP endpoint A sets up an association towards SCTP endpoint B
> > 2b) Middlebox C sees INIT sequence and creates "primary" conntrack
> > entry (5 days)
> > 2c) Middlebox D sees DATA/SACK, and DROPS packets until HEARTBEAT is
> > seen to setup "secondary" conntrack entry (210 seconds)
> >
> > >
> > > Thanks.

Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Pablo Neira Ayuso]

On Wed, Jan 11, 2023 at 09:36:38AM +0000, Sriram Yagnaraman wrote:
> > -----Original Message-----
> > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > Sent: Friday, 6 January 2023 01:50
> > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> > Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> > <lxin@redhat.com>; Claudio Porfiri <claudio.porfiri@ericsson.com>
> > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> > 
> > On Thu, Jan 05, 2023 at 12:11:44PM +0000, Sriram Yagnaraman wrote:
> > > > -----Original Message-----
> > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > Sent: Thursday, 5 January 2023 12:54
> > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>; Long
> > > > Xin <lxin@redhat.com>; Claudio Porfiri
> > > > <claudio.porfiri@ericsson.com>
> > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state
> > > > machine
> > > >
> > > > On Thu, Jan 05, 2023 at 11:41:13AM +0000, Sriram Yagnaraman wrote:
> > > > > > -----Original Message-----
> > > > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > > > Sent: Wednesday, 4 January 2023 16:02
> > > > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>;
> > > > > > Long Xin <lxin@redhat.com>
> > > > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp
> > > > > > state machine
> > > > > >
> > > > > > On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman
> > wrote:
> > > > > > > All the paths in an SCTP connection are kept alive either by
> > > > > > > actual DATA/SACK running through the connection or by HEARTBEAT.
> > > > > > > This patch proposes a simple state machine with only two
> > > > > > > states OPEN_WAIT and ESTABLISHED (similar to UDP). The reason
> > > > > > > for this change is a full stateful approach to SCTP is
> > > > > > > difficult when the association is multihomed since the
> > > > > > > endpoints could use different paths in the network during the lifetime
> > of an association.
> > > > > >
> > > > > > Do you mean the router/firewall might not see all packets for
> > > > > > association is multihomed?
> > > > > >
> > > > > > Could you please provide an example?
> > > > >
> > > > > Let's say the primary and alternate/secondary paths between the
> > > > > SCTP endpoints traverse different middle boxes. If an SCTP
> > > > > endpoint detects network failure on the primary path, it will
> > > > > switch to using the secondary path and all subsequent packets will
> > > > > not be seen by the middlebox on the primary path, including
> > > > > SHUTDOWN sequences if they happen at that time.
> > > >
> > > > OK, then on the primary middle box the SCTP flow will just timeout?
> > > > (because no more packets are seen).
> > >
> > > Yes, they will timeout unless the primary path comes up before the
> > > SHUTDOWN sequence. And the default timeout for an ESTABLISHED SCTP
> > > connection is 5 days, which is a "long" time to clean-up this entry.
> > 
> > Does the middle box have a chance to see any packet that provides a hint to
> > shorten this timeout? no HEARTBEAT packets are seen in this case on the
> > former primary path?
> 
> There will be HEARTBEAT as soon as a path becomes unreachable from
> the SCTP endpoints. But depending on the location of the network
> failure, the middlebox may or may not see the HEARTBEAT.

Conntrack assumes you have see all traffic that belongs the flow for
other protocols too.

> Also, HEARTBEAT is sent when there are no data to be transmitted or
> if the path is unreachable/unconfirmed, so I think there is no
> deterministic way of finding out when to shorten the timeout. Of
> course, a user has the option of setting the ESTABLISHED state
> timeout to a more reasonable value, for e.g., same as the
> HEARTBEAT_ACKED state timeout (210 sec), OR we could reduce the
> default timeout of ESTABLISHED to 210 sec.

Then just set up a short ESTABLISHED when multihoming is in place
since the beginning.

> > What I am missing are a more detailed list of issues with the existing
> > approach. Your patch description says "SCTP tracking with multihoming is
> > difficult", probably a list of scenarios would help to understand the motivation
> > to simplify the state machine.
> 
> Thank you for reviewing and asking these questions, it made me step back and think. I list below some background
> - I want to simplify the state machine, because it is possible to
> track an SCTP connection with fewer states, for e.g., SCTP with UDP
> encapsulation uses UDP conntrack with just UNREPLIED/REPLIED states
> and it works perfectly fine

I think it would preferrable to add some configuration via ruleset to
track SCTP over UDP, rather than deranking SCTP to become almost
stateless.

> - My stakeholders, at the behest of whom I am proposing these
> changes hit some problems running SCTP client endpoints behind NAT
> (inside Kubernetes pods) towards multihomed SCTP server endpoints
> (1a-g) and (2a-c) below
> - Some upcoming SCTP protocol changes in IETF (if
> approved/implemented) will make it hard to read beyond the SCTP
> common header, for e.g., DTLS over SCTP
> https://datatracker.ietf.org/doc/draft-ietf-tsvwg-dtls-over-sctp-bis/,
> proposes to encrypt all SCTP chunks, conntrack will only be able to
> see SCTP common header, these changes hopefully will make it easier
> to adapt to such changes in SCTP protocol - While at it, I also made
> some other "improvements"

For this DTLS case it should be possible to fall back to the SCTP
"stateless" approach.

> 	a) Avoid multiple walk-throughs of SCTP chunks in sctp_new(), sctp_basic_checks() and nf_conntrack_sctp_packet(), and parse it only once
> 	b) SCTP conntrack has the same state regardless of it is a primary or a secondary path
> 
> Let's say there are two SCTP endpoints A and B with addresses A' and B, B'' correspondingly.
> Primary path is A' <----> B' that traverses middlebox C, and secondary path is A' <----> B'' that traverses middlebox D.
> 1) SHUTDOWN sent on secondary path
> 1a) SCTP endpoint A sets up an association towards SCTP endpoint B
> 1b) Middlebox C sees INIT sequence and creates "primary" conntrack entry (5 days)
> 1c) Middlebox D sees HEARTBEAT sequence and creates "secondary" conntrack entry (210 seconds)
> 1d) Path failure between A and C, and SCTP endpoint A switches to secondary path and continues sending data on the association
> 1e) SCTP endpoint A decides to SHUTDOWN the connection
> 1f) Middlebox C is in ESTABLISHED state, doesn't see any SHUTDOWN sequence or HEARTBEAT, waits for timeout (5 days)
> 1g) Middlebox D is in HEARTBEAT_ACKED state, doesn't care about SHUTDOWN sequence, waits for timeout (210 seconds)

I guess similar problem will occur with MP-TCP, and I am not sure
taking TCP to be more stateless is the way to address this.

> 2) Recently fixed by bff3d0534804 ("netfilter: conntrack: add sctp DATA_SENT state ")
> 2a) SCTP endpoint A sets up an association towards SCTP endpoint B
> 2b) Middlebox C sees INIT sequence and creates "primary" conntrack entry (5 days)
> 2c) Middlebox D sees DATA/SACK, and DROPS packets until HEARTBEAT is seen to setup "secondary" conntrack entry (210 seconds)

I assume this is already fixed.

Another possibility would be to introduce this alternative
state-machine and use it for multihoming?

RE: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Sriram Yagnaraman]

> -----Original Message-----
> From: Pablo Neira Ayuso <pablo@netfilter.org>
> Sent: Thursday, 12 January 2023 12:50
> To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> <lxin@redhat.com>; Claudio Porfiri <claudio.porfiri@ericsson.com>
> Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> 
> On Wed, Jan 11, 2023 at 09:36:38AM +0000, Sriram Yagnaraman wrote:
> > > -----Original Message-----
> > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > Sent: Friday, 6 January 2023 01:50
> > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>; Long
> > > Xin <lxin@redhat.com>; Claudio Porfiri
> > > <claudio.porfiri@ericsson.com>
> > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state
> > > machine
> > >
> > > On Thu, Jan 05, 2023 at 12:11:44PM +0000, Sriram Yagnaraman wrote:
> > > > > -----Original Message-----
> > > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > > Sent: Thursday, 5 January 2023 12:54
> > > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>;
> > > > > Long Xin <lxin@redhat.com>; Claudio Porfiri
> > > > > <claudio.porfiri@ericsson.com>
> > > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp
> > > > > state machine
> > > > >
> > > > > On Thu, Jan 05, 2023 at 11:41:13AM +0000, Sriram Yagnaraman wrote:
> > > > > > > -----Original Message-----
> > > > > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > > > > Sent: Wednesday, 4 January 2023 16:02
> > > > > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > > > > <fw@strlen.de>; Marcelo Ricardo Leitner
> > > > > > > <mleitner@redhat.com>; Long Xin <lxin@redhat.com>
> > > > > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp
> > > > > > > state machine
> > > > > > >
> > > > > > > On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram Yagnaraman
> > > wrote:
> > > > > > > > All the paths in an SCTP connection are kept alive either
> > > > > > > > by actual DATA/SACK running through the connection or by
> HEARTBEAT.
> > > > > > > > This patch proposes a simple state machine with only two
> > > > > > > > states OPEN_WAIT and ESTABLISHED (similar to UDP). The
> > > > > > > > reason for this change is a full stateful approach to SCTP
> > > > > > > > is difficult when the association is multihomed since the
> > > > > > > > endpoints could use different paths in the network during
> > > > > > > > the lifetime
> > > of an association.
> > > > > > >
> > > > > > > Do you mean the router/firewall might not see all packets
> > > > > > > for association is multihomed?
> > > > > > >
> > > > > > > Could you please provide an example?
> > > > > >
> > > > > > Let's say the primary and alternate/secondary paths between
> > > > > > the SCTP endpoints traverse different middle boxes. If an SCTP
> > > > > > endpoint detects network failure on the primary path, it will
> > > > > > switch to using the secondary path and all subsequent packets
> > > > > > will not be seen by the middlebox on the primary path,
> > > > > > including SHUTDOWN sequences if they happen at that time.
> > > > >
> > > > > OK, then on the primary middle box the SCTP flow will just timeout?
> > > > > (because no more packets are seen).
> > > >
> > > > Yes, they will timeout unless the primary path comes up before the
> > > > SHUTDOWN sequence. And the default timeout for an ESTABLISHED
> SCTP
> > > > connection is 5 days, which is a "long" time to clean-up this entry.
> > >
> > > Does the middle box have a chance to see any packet that provides a
> > > hint to shorten this timeout? no HEARTBEAT packets are seen in this
> > > case on the former primary path?
> >
> > There will be HEARTBEAT as soon as a path becomes unreachable from the
> > SCTP endpoints. But depending on the location of the network failure,
> > the middlebox may or may not see the HEARTBEAT.
> 
> Conntrack assumes you have see all traffic that belongs the flow for other
> protocols too.
> 
> > Also, HEARTBEAT is sent when there are no data to be transmitted or if
> > the path is unreachable/unconfirmed, so I think there is no
> > deterministic way of finding out when to shorten the timeout. Of
> > course, a user has the option of setting the ESTABLISHED state timeout
> > to a more reasonable value, for e.g., same as the HEARTBEAT_ACKED
> > state timeout (210 sec), OR we could reduce the default timeout of
> > ESTABLISHED to 210 sec.
> 
> Then just set up a short ESTABLISHED when multihoming is in place since the
> beginning.
> 
> > > What I am missing are a more detailed list of issues with the
> > > existing approach. Your patch description says "SCTP tracking with
> > > multihoming is difficult", probably a list of scenarios would help
> > > to understand the motivation to simplify the state machine.
> >
> > Thank you for reviewing and asking these questions, it made me step
> > back and think. I list below some background
> > - I want to simplify the state machine, because it is possible to
> > track an SCTP connection with fewer states, for e.g., SCTP with UDP
> > encapsulation uses UDP conntrack with just UNREPLIED/REPLIED states
> > and it works perfectly fine
> 
> I think it would preferrable to add some configuration via ruleset to track SCTP
> over UDP, rather than deranking SCTP to become almost stateless.

Okay 😊

> 
> > - My stakeholders, at the behest of whom I am proposing these changes
> > hit some problems running SCTP client endpoints behind NAT (inside
> > Kubernetes pods) towards multihomed SCTP server endpoints
> > (1a-g) and (2a-c) below
> > - Some upcoming SCTP protocol changes in IETF (if
> > approved/implemented) will make it hard to read beyond the SCTP common
> > header, for e.g., DTLS over SCTP
> > https://datatracker.ietf.org/doc/draft-ietf-tsvwg-dtls-over-sctp-bis/,
> > proposes to encrypt all SCTP chunks, conntrack will only be able to
> > see SCTP common header, these changes hopefully will make it easier to
> > adapt to such changes in SCTP protocol - While at it, I also made some
> > other "improvements"
> 
> For this DTLS case it should be possible to fall back to the SCTP "stateless"
> approach.
> 
> > 	a) Avoid multiple walk-throughs of SCTP chunks in sctp_new(),
> sctp_basic_checks() and nf_conntrack_sctp_packet(), and parse it only once
> > 	b) SCTP conntrack has the same state regardless of it is a primary or
> > a secondary path
> >
> > Let's say there are two SCTP endpoints A and B with addresses A' and B, B''
> correspondingly.
> > Primary path is A' <----> B' that traverses middlebox C, and secondary path is
> A' <----> B'' that traverses middlebox D.
> > 1) SHUTDOWN sent on secondary path
> > 1a) SCTP endpoint A sets up an association towards SCTP endpoint B
> > 1b) Middlebox C sees INIT sequence and creates "primary" conntrack
> > entry (5 days)
> > 1c) Middlebox D sees HEARTBEAT sequence and creates "secondary"
> > conntrack entry (210 seconds)
> > 1d) Path failure between A and C, and SCTP endpoint A switches to
> > secondary path and continues sending data on the association
> > 1e) SCTP endpoint A decides to SHUTDOWN the connection
> > 1f) Middlebox C is in ESTABLISHED state, doesn't see any SHUTDOWN
> > sequence or HEARTBEAT, waits for timeout (5 days)
> > 1g) Middlebox D is in HEARTBEAT_ACKED state, doesn't care about
> > SHUTDOWN sequence, waits for timeout (210 seconds)
> 
> I guess similar problem will occur with MP-TCP, and I am not sure taking TCP
> to be more stateless is the way to address this.

Ok, I am a newbie to this area and am most probably mistaken, so forgive my naive question below.
Shouldn't conntrack understand as less as possible about the protocol, and parse the bare minimum from the packet to detect that an active connection?
For packet filtering/firewall, I understand we will need deep packet inspection, but is conntrack the place to do that?

> 
> > 2) Recently fixed by bff3d0534804 ("netfilter: conntrack: add sctp
> > DATA_SENT state ")
> > 2a) SCTP endpoint A sets up an association towards SCTP endpoint B
> > 2b) Middlebox C sees INIT sequence and creates "primary" conntrack
> > entry (5 days)
> > 2c) Middlebox D sees DATA/SACK, and DROPS packets until HEARTBEAT is
> > seen to setup "secondary" conntrack entry (210 seconds)
> 
> I assume this is already fixed.
> 
> Another possibility would be to introduce this alternative state-machine and
> use it for multihoming?

Or I could unify the established states for both the connection that saw an INIT/INIT_ACK sequence and HEARTBEAT/HEARTBEAT_ACK sequence and use the HEARTBEAT_ACKED state timeout for both. That way, there is no difference from a conntrack perspective between "primary" and "secondary" connections. I can send another patch if the group here thinks this is a good idea.

RE: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[Sriram Yagnaraman]

> -----Original Message-----
> From: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> Sent: Friday, 13 January 2023 10:04
> To: Pablo Neira Ayuso <pablo@netfilter.org>
> Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> <lxin@redhat.com>; Claudio Porfiri <claudio.porfiri@ericsson.com>
> Subject: RE: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
> 
> 
> 
> > -----Original Message-----
> > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > Sent: Thursday, 12 January 2023 12:50
> > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > Cc: netfilter-devel@vger.kernel.org; Florian Westphal <fw@strlen.de>;
> > Marcelo Ricardo Leitner <mleitner@redhat.com>; Long Xin
> > <lxin@redhat.com>; Claudio Porfiri <claudio.porfiri@ericsson.com>
> > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state
> > machine
> >
> > On Wed, Jan 11, 2023 at 09:36:38AM +0000, Sriram Yagnaraman wrote:
> > > > -----Original Message-----
> > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > Sent: Friday, 6 January 2023 01:50
> > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>;
> > > > Long Xin <lxin@redhat.com>; Claudio Porfiri
> > > > <claudio.porfiri@ericsson.com>
> > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp state
> > > > machine
> > > >
> > > > On Thu, Jan 05, 2023 at 12:11:44PM +0000, Sriram Yagnaraman wrote:
> > > > > > -----Original Message-----
> > > > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > > > Sent: Thursday, 5 January 2023 12:54
> > > > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > > > <fw@strlen.de>; Marcelo Ricardo Leitner <mleitner@redhat.com>;
> > > > > > Long Xin <lxin@redhat.com>; Claudio Porfiri
> > > > > > <claudio.porfiri@ericsson.com>
> > > > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify sctp
> > > > > > state machine
> > > > > >
> > > > > > On Thu, Jan 05, 2023 at 11:41:13AM +0000, Sriram Yagnaraman
> wrote:
> > > > > > > > -----Original Message-----
> > > > > > > > From: Pablo Neira Ayuso <pablo@netfilter.org>
> > > > > > > > Sent: Wednesday, 4 January 2023 16:02
> > > > > > > > To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> > > > > > > > Cc: netfilter-devel@vger.kernel.org; Florian Westphal
> > > > > > > > <fw@strlen.de>; Marcelo Ricardo Leitner
> > > > > > > > <mleitner@redhat.com>; Long Xin <lxin@redhat.com>
> > > > > > > > Subject: Re: [RFC PATCH] netfilter: conntrack: simplify
> > > > > > > > sctp state machine
> > > > > > > >
> > > > > > > > On Wed, Jan 04, 2023 at 12:31:43PM +0100, Sriram
> > > > > > > > Yagnaraman
> > > > wrote:
> > > > > > > > > All the paths in an SCTP connection are kept alive
> > > > > > > > > either by actual DATA/SACK running through the
> > > > > > > > > connection or by
> > HEARTBEAT.
> > > > > > > > > This patch proposes a simple state machine with only two
> > > > > > > > > states OPEN_WAIT and ESTABLISHED (similar to UDP). The
> > > > > > > > > reason for this change is a full stateful approach to
> > > > > > > > > SCTP is difficult when the association is multihomed
> > > > > > > > > since the endpoints could use different paths in the
> > > > > > > > > network during the lifetime
> > > > of an association.
> > > > > > > >
> > > > > > > > Do you mean the router/firewall might not see all packets
> > > > > > > > for association is multihomed?
> > > > > > > >
> > > > > > > > Could you please provide an example?
> > > > > > >
> > > > > > > Let's say the primary and alternate/secondary paths between
> > > > > > > the SCTP endpoints traverse different middle boxes. If an
> > > > > > > SCTP endpoint detects network failure on the primary path,
> > > > > > > it will switch to using the secondary path and all
> > > > > > > subsequent packets will not be seen by the middlebox on the
> > > > > > > primary path, including SHUTDOWN sequences if they happen at
> that time.
> > > > > >
> > > > > > OK, then on the primary middle box the SCTP flow will just timeout?
> > > > > > (because no more packets are seen).
> > > > >
> > > > > Yes, they will timeout unless the primary path comes up before
> > > > > the SHUTDOWN sequence. And the default timeout for an
> > > > > ESTABLISHED
> > SCTP
> > > > > connection is 5 days, which is a "long" time to clean-up this entry.
> > > >
> > > > Does the middle box have a chance to see any packet that provides
> > > > a hint to shorten this timeout? no HEARTBEAT packets are seen in
> > > > this case on the former primary path?
> > >
> > > There will be HEARTBEAT as soon as a path becomes unreachable from
> > > the SCTP endpoints. But depending on the location of the network
> > > failure, the middlebox may or may not see the HEARTBEAT.
> >
> > Conntrack assumes you have see all traffic that belongs the flow for
> > other protocols too.
> >
> > > Also, HEARTBEAT is sent when there are no data to be transmitted or
> > > if the path is unreachable/unconfirmed, so I think there is no
> > > deterministic way of finding out when to shorten the timeout. Of
> > > course, a user has the option of setting the ESTABLISHED state
> > > timeout to a more reasonable value, for e.g., same as the
> > > HEARTBEAT_ACKED state timeout (210 sec), OR we could reduce the
> > > default timeout of ESTABLISHED to 210 sec.
> >
> > Then just set up a short ESTABLISHED when multihoming is in place
> > since the beginning.
> >
> > > > What I am missing are a more detailed list of issues with the
> > > > existing approach. Your patch description says "SCTP tracking with
> > > > multihoming is difficult", probably a list of scenarios would help
> > > > to understand the motivation to simplify the state machine.
> > >
> > > Thank you for reviewing and asking these questions, it made me step
> > > back and think. I list below some background
> > > - I want to simplify the state machine, because it is possible to
> > > track an SCTP connection with fewer states, for e.g., SCTP with UDP
> > > encapsulation uses UDP conntrack with just UNREPLIED/REPLIED states
> > > and it works perfectly fine
> >
> > I think it would preferrable to add some configuration via ruleset to
> > track SCTP over UDP, rather than deranking SCTP to become almost
> stateless.
> 
> Okay 😊
> 
> >
> > > - My stakeholders, at the behest of whom I am proposing these
> > > changes hit some problems running SCTP client endpoints behind NAT
> > > (inside Kubernetes pods) towards multihomed SCTP server endpoints
> > > (1a-g) and (2a-c) below
> > > - Some upcoming SCTP protocol changes in IETF (if
> > > approved/implemented) will make it hard to read beyond the SCTP
> > > common header, for e.g., DTLS over SCTP
> > > https://datatracker.ietf.org/doc/draft-ietf-tsvwg-dtls-over-sctp-bis
> > > /, proposes to encrypt all SCTP chunks, conntrack will only be able
> > > to see SCTP common header, these changes hopefully will make it
> > > easier to adapt to such changes in SCTP protocol - While at it, I
> > > also made some other "improvements"
> >
> > For this DTLS case it should be possible to fall back to the SCTP "stateless"
> > approach.
> >
> > > 	a) Avoid multiple walk-throughs of SCTP chunks in sctp_new(),
> > sctp_basic_checks() and nf_conntrack_sctp_packet(), and parse it only
> > once
> > > 	b) SCTP conntrack has the same state regardless of it is a primary
> > > or a secondary path
> > >
> > > Let's say there are two SCTP endpoints A and B with addresses A' and B, B''
> > correspondingly.
> > > Primary path is A' <----> B' that traverses middlebox C, and
> > > secondary path is
> > A' <----> B'' that traverses middlebox D.
> > > 1) SHUTDOWN sent on secondary path
> > > 1a) SCTP endpoint A sets up an association towards SCTP endpoint B
> > > 1b) Middlebox C sees INIT sequence and creates "primary" conntrack
> > > entry (5 days)
> > > 1c) Middlebox D sees HEARTBEAT sequence and creates "secondary"
> > > conntrack entry (210 seconds)
> > > 1d) Path failure between A and C, and SCTP endpoint A switches to
> > > secondary path and continues sending data on the association
> > > 1e) SCTP endpoint A decides to SHUTDOWN the connection
> > > 1f) Middlebox C is in ESTABLISHED state, doesn't see any SHUTDOWN
> > > sequence or HEARTBEAT, waits for timeout (5 days)
> > > 1g) Middlebox D is in HEARTBEAT_ACKED state, doesn't care about
> > > SHUTDOWN sequence, waits for timeout (210 seconds)
> >
> > I guess similar problem will occur with MP-TCP, and I am not sure
> > taking TCP to be more stateless is the way to address this.
> 
> Ok, I am a newbie to this area and am most probably mistaken, so forgive my
> naive question below.
> Shouldn't conntrack understand as less as possible about the protocol, and
> parse the bare minimum from the packet to detect that an active connection?
> For packet filtering/firewall, I understand we will need deep packet inspection,
> but is conntrack the place to do that?
> 
> >
> > > 2) Recently fixed by bff3d0534804 ("netfilter: conntrack: add sctp
> > > DATA_SENT state ")
> > > 2a) SCTP endpoint A sets up an association towards SCTP endpoint B
> > > 2b) Middlebox C sees INIT sequence and creates "primary" conntrack
> > > entry (5 days)
> > > 2c) Middlebox D sees DATA/SACK, and DROPS packets until HEARTBEAT is
> > > seen to setup "secondary" conntrack entry (210 seconds)
> >
> > I assume this is already fixed.
> >
> > Another possibility would be to introduce this alternative
> > state-machine and use it for multihoming?
> 
> Or I could unify the established states for both the connection that saw an
> INIT/INIT_ACK sequence and HEARTBEAT/HEARTBEAT_ACK sequence and use
> the HEARTBEAT_ACKED state timeout for both. That way, there is no
> difference from a conntrack perspective between "primary" and "secondary"
> connections. I can send another patch if the group here thinks this is a good
> idea.
Here it is: https://lore.kernel.org/netfilter-devel/20230116093556.9437-1-sriram.yagnaraman@est.tech/T/#t

Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2755 bytes --]

Hi Sriram,

[FYI, it's a private test report for your RFC patch.]
[auto build test WARNING on linus/master]
[also build test WARNING on v6.2-rc2 next-20230105]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Sriram-Yagnaraman/netfilter-conntrack-simplify-sctp-state-machine/20230104-193947
patch link:    https://lore.kernel.org/r/20230104113143.21769-1-sriram.yagnaraman%40est.tech
patch subject: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
config: riscv-rv32_defconfig
compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 8d9828ef5aa9688500657d36cd2aefbe12bbd162)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install riscv cross compiling tool for clang build
        # apt-get install binutils-riscv-linux-gnu
        # https://github.com/intel-lab-lkp/linux/commit/467e57bcd514f0155968c572422beba71553282f
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Sriram-Yagnaraman/netfilter-conntrack-simplify-sctp-state-machine/20230104-193947
        git checkout 467e57bcd514f0155968c572422beba71553282f
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=riscv olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=riscv SHELL=/bin/bash net/netfilter/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> net/netfilter/nf_conntrack_proto_sctp.c:33:26: warning: unused variable 'sctp_conntrack_names' [-Wunused-const-variable]
   static const char *const sctp_conntrack_names[] = {
                            ^
   1 warning generated.


vim +/sctp_conntrack_names +33 net/netfilter/nf_conntrack_proto_sctp.c

9fb9cbb1082d6b3 Yasuyuki Kozakai  2005-11-09  32  
12c33aa20e1e248 Jan Engelhardt    2008-04-14 @33  static const char *const sctp_conntrack_names[] = {
9fb9cbb1082d6b3 Yasuyuki Kozakai  2005-11-09  34  	"NONE",
467e57bcd514f01 Sriram Yagnaraman 2023-01-04  35  	"OPEN_WAIT",
9fb9cbb1082d6b3 Yasuyuki Kozakai  2005-11-09  36  	"ESTABLISHED",
9fb9cbb1082d6b3 Yasuyuki Kozakai  2005-11-09  37  };
9fb9cbb1082d6b3 Yasuyuki Kozakai  2005-11-09  38  

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 116016 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/riscv 6.2.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 16.0.0 (git://gitmirror/llvm_project 8d9828ef5aa9688500657d36cd2aefbe12bbd162)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=160000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=160000
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=160000
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_PROFILING=y
# end of General setup

CONFIG_32BIT=y
CONFIG_RISCV=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_RISCV_SBI=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RISCV_DMA_NONCOHERENT=y
CONFIG_AS_HAS_INSN=y

#
# SoC selection
#
CONFIG_SOC_MICROCHIP_POLARFIRE=y
CONFIG_ARCH_RENESAS=y
CONFIG_SOC_SIFIVE=y
CONFIG_SOC_STARFIVE=y
CONFIG_SOC_VIRT=y
# end of SoC selection

#
# CPU errata selection
#
CONFIG_ERRATA_SIFIVE=y
# CONFIG_ERRATA_THEAD is not set
# end of CPU errata selection

#
# Platform type
#
CONFIG_NONPORTABLE=y
CONFIG_ARCH_RV32I=y
# CONFIG_ARCH_RV64I is not set
# CONFIG_CMODEL_MEDLOW is not set
CONFIG_CMODEL_MEDANY=y
CONFIG_MODULE_SECTIONS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=64
CONFIG_HOTPLUG_CPU=y
CONFIG_TUNE_GENERIC=y
# CONFIG_NUMA is not set
CONFIG_RISCV_ALTERNATIVE=y
CONFIG_RISCV_ISA_C=y
CONFIG_TOOLCHAIN_HAS_ZICBOM=y
CONFIG_RISCV_ISA_ZICBOM=y
CONFIG_TOOLCHAIN_HAS_ZIHINTPAUSE=y
CONFIG_FPU=y
# end of Platform type

#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_RISCV_SBI_V01 is not set
# CONFIG_RISCV_BOOT_SPINWAIT is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# end of Kernel features

#
# Boot options
#
CONFIG_CMDLINE=""
CONFIG_EFI_STUB=y
CONFIG_EFI=y
# CONFIG_PHYS_RAM_BASE_FIXED is not set
# CONFIG_XIP_KERNEL is not set
# end of Boot options

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
# end of Power management options

#
# CPU Power Management
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_DT_IDLE_STATES=y
CONFIG_DT_IDLE_GENPD=y

#
# RISC-V CPU Idle Drivers
#
CONFIG_RISCV_SBI_CPUIDLE=y
# end of RISC-V CPU Idle Drivers
# end of CPU Idle

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
# end of CPU Power Management

CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m

#
# General architecture-dependent options
#
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_FUNCTION_ALIGNMENT=0
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_MMIOWB=y
CONFIG_MMIOWB=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB_DEPRECATED is not set
# CONFIG_SLUB_TINY is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_ESP=m
# CONFIG_NET_KEY is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_ZONES is not set
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
# CONFIG_NETFILTER_XT_CONNMARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_NAT=m
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

# CONFIG_IP_SET is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
# CONFIG_IP_VS_PROTO_SCTP is not set

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
# CONFIG_IP_VS_WLC is not set
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
# CONFIG_IP_VS_LBLC is not set
# CONFIG_IP_VS_LBLCR is not set
# CONFIG_IP_VS_DH is not set
# CONFIG_IP_VS_SH is not set
# CONFIG_IP_VS_MH is not set
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
# CONFIG_IP_VS_TWOS is not set

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set
CONFIG_IP_VS_NFCT=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_RPFILTER is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_RPFILTER is not set
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_IP6_NF_NAT is not set
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=m
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_ECAM=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCIE_RCAR_HOST is not set
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCIE_XILINX=y
# CONFIG_PCIE_MICROCHIP_HOST is not set

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
CONFIG_PCIE_FU740=y
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MOXTET is not set
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

# CONFIG_CONNECTOR is not set

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_PARAMS_FROM_FDT=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB=y
# CONFIG_EFI_ZBOOT is not set
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_DMA_DEFAULT_COHERENT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# CONFIG_GP_PCI1XXXX is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_RCAR is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_AUDIT is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=m
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
# CONFIG_MACVTAP is not set
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
# CONFIG_IPVTAP is not set
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=y
# CONFIG_MACB_PCI is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=y
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_ADI=y
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_SPI is not set
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_SH_ETH is not set
# CONFIG_RAVB is not set
# CONFIG_RENESAS_ETHER_SWITCH is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_FIXED_PHY=y
# CONFIG_SFP is not set

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
CONFIG_MICROSEMI_PHY=y
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PSE_CONTROLLER is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_IPQ4019 is not set
# CONFIG_MDIO_IPQ8064 is not set

#
# MDIO Multiplexers
#
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set

#
# PCS device drivers
#
# end of PCS device drivers

# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_WAN is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_PERICOM=y
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=18
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_EARLYCON=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_GOLDFISH_TTY is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_RPMSG_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
CONFIG_DEVPORT=y
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PCI1XXXX is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_RSPI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH_HSPI is not set
CONFIG_SPI_SIFIVE=y
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_STMFX is not set

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_RZG2L=y
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_STARFIVE_JH7100=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_RCAR is not set
CONFIG_GPIO_SIFIVE=y
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_OCELOT is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# CONFIG_MFD_RSMU_I2C is not set
# CONFIG_MFD_RSMU_SPI is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO_NOMODESET=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# CONFIG_DRM_KOMEDA is not set
# end of ARM devices

CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_USE_LVDS is not set
# CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
# CONFIG_DRM_RZG2L_MIPI_DSI is not set
# CONFIG_DRM_QXL is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_ABT_Y030XX067A is not set
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
# CONFIG_DRM_PANEL_INNOLUX_EJ030NA is not set
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
# CONFIG_DRM_PANEL_NEWVISION_NV3052C is not set
# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_IMX_LCDIF is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
CONFIG_DRM_LEGACY=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

# CONFIG_LOGO is not set
# end of Graphics support

# CONFIG_DRM_ACCEL is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support

#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_XHCI_RCAR=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set

#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ONBOARD_HUB is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_SDHCI_OF_ARASAN is not set
# CONFIG_MMC_SDHCI_OF_AT91 is not set
# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
CONFIG_MMC_SDHCI_CADENCE=y
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_SDHCI_MILBEAUT is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
# CONFIG_MMC_SDHI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_SH_MMCIF is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_CQHCI is not set
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MMC_SDHCI_OMAP is not set
# CONFIG_MMC_SDHCI_AM654 is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=m

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_EFI is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SH is not set
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_R7301 is not set

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_RTC_DRV_POLARFIRE_SOC is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
CONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
CONFIG_CLK_ANALOGBITS_WRPLL_CLN28HPC=y
CONFIG_MCHP_CLK_MPFS=y
CONFIG_CLK_RENESAS=y
CONFIG_CLK_R9A07G043=y
# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
CONFIG_CLK_RZG2L=y
CONFIG_CLK_SIFIVE=y
CONFIG_CLK_SIFIVE_PRCI=y
CONFIG_CLK_STARFIVE_JH7100=y
CONFIG_CLK_STARFIVE_JH7100_AUDIO=m
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
# CONFIG_RENESAS_OSTM is not set
CONFIG_RISCV_TIMER=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
# CONFIG_IOMMUFD is not set
# CONFIG_IPMMU_VMSA is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

CONFIG_SOC_RENESAS=y
CONFIG_ARCH_RZG2L=y
CONFIG_ARCH_R9A07G043=y
# CONFIG_SIFIVE_CCACHE is not set
# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
CONFIG_RENESAS_RZG2L_IRQC=y
# CONFIG_XILINX_INTC is not set
CONFIG_RISCV_INTC=y
CONFIG_SIFIVE_PLIC=y
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_POLARFIRE_SOC=y
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_STARFIVE_JH7100=y
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_CADENCE_TORRENT is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_LAN966X_SERDES is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
# CONFIG_PHY_OCELOT_SERDES is not set
# CONFIG_PHY_R8A779F0_ETHERNET_SERDES is not set
# CONFIG_PHY_RCAR_GEN3_PCIE is not set
# CONFIG_PHY_RCAR_GEN3_USB2 is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RISCV_PMU=y
CONFIG_RISCV_PMU_LEGACY=y
CONFIG_RISCV_PMU_SBI=y
# end of Performance monitor support

# CONFIG_RAS is not set
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_EFIVAR_FS=m
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=y
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFS_V4_2_READ_PLUS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_SMB_SERVER is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
# CONFIG_9P_FS_POSIX_ACL is not set
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization

CONFIG_CC_HAS_RANDSTRUCT=y
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=m
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression

#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# end of Userspace interface

CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_VIRTIO=y
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=m
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_CPUMASK_OFFSTACK is not set
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# end of Library routines

CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_ASHLDI3=y
CONFIG_GENERIC_LIB_ASHRDI3=y
CONFIG_GENERIC_LIB_LSHRDI3=y
CONFIG_GENERIC_LIB_UCMPDI2=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KGDB_QXFER_PKT=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_MAPLE_TREE is not set
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_RWSEMS=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# riscv Debugging
#
# end of riscv Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

Re: [RFC PATCH] netfilter: conntrack: simplify sctp state machine

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2343 bytes --]

Hi Sriram,

[FYI, it's a private test report for your RFC patch.]
[auto build test WARNING on linus/master]
[also build test WARNING on v6.2-rc2 next-20230105]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Sriram-Yagnaraman/netfilter-conntrack-simplify-sctp-state-machine/20230104-193947
patch link:    https://lore.kernel.org/r/20230104113143.21769-1-sriram.yagnaraman%40est.tech
patch subject: [RFC PATCH] netfilter: conntrack: simplify sctp state machine
config: i386-randconfig-a003-20210930
compiler: gcc-11 (Debian 11.3.0-8) 11.3.0
reproduce (this is a W=1 build):
        # https://github.com/intel-lab-lkp/linux/commit/467e57bcd514f0155968c572422beba71553282f
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Sriram-Yagnaraman/netfilter-conntrack-simplify-sctp-state-machine/20230104-193947
        git checkout 467e57bcd514f0155968c572422beba71553282f
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 O=build_dir ARCH=i386 olddefconfig
        make W=1 O=build_dir ARCH=i386 SHELL=/bin/bash net/netfilter/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> net/netfilter/nf_conntrack_proto_sctp.c:33:26: warning: 'sctp_conntrack_names' defined but not used [-Wunused-const-variable=]
      33 | static const char *const sctp_conntrack_names[] = {
         |                          ^~~~~~~~~~~~~~~~~~~~


vim +/sctp_conntrack_names +33 net/netfilter/nf_conntrack_proto_sctp.c

9fb9cbb1082d6b Yasuyuki Kozakai  2005-11-09  32  
12c33aa20e1e24 Jan Engelhardt    2008-04-14 @33  static const char *const sctp_conntrack_names[] = {
9fb9cbb1082d6b Yasuyuki Kozakai  2005-11-09  34  	"NONE",
467e57bcd514f0 Sriram Yagnaraman 2023-01-04  35  	"OPEN_WAIT",
9fb9cbb1082d6b Yasuyuki Kozakai  2005-11-09  36  	"ESTABLISHED",
9fb9cbb1082d6b Yasuyuki Kozakai  2005-11-09  37  };
9fb9cbb1082d6b Yasuyuki Kozakai  2005-11-09  38  

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 169420 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 6.2.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-8) 11.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23900
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23900
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=125
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y
# CONFIG_BPF_PRELOAD is not set
# CONFIG_BPF_LSM is not set
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting

# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# CONFIG_RCU_LAZY is not set
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_TIME_NS is not set
# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_X86_32_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_MPPARSE is not set
CONFIG_GOLDFISH=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_MID=y
# CONFIG_X86_INTEL_QUARK is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_X86_RDC321X is not set
CONFIG_X86_32_NON_STANDARD=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_STA2X11 is not set
CONFIG_X86_32_IRIS=m
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_M486SX is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_CYRIX_32 is not set
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_HYGON is not set
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_CPU_SUP_TRANSMETA_32=y
# CONFIG_CPU_SUP_UMC_32 is not set
# CONFIG_CPU_SUP_ZHAOXIN is not set
CONFIG_CPU_SUP_VORTEX_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=64
CONFIG_NR_CPUS_DEFAULT=32
CONFIG_NR_CPUS=32
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_MC_PRIO is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
# end of Performance monitoring

# CONFIG_X86_LEGACY_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
CONFIG_X86_IOPL_IOPERM=y
# CONFIG_TOSHIBA is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
# CONFIG_X86_INTEL_TSX_MODE_OFF is not set
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
CONFIG_X86_INTEL_TSX_MODE_AUTO=y
# CONFIG_EFI is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
# end of Processor type and features

CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_CC_HAS_ENTRY_PADDING=y
CONFIG_FUNCTION_PADDING_CFI=0
CONFIG_FUNCTION_PADDING_BYTES=4
CONFIG_SPECULATION_MITIGATIONS=y
CONFIG_RETPOLINE=y
# CONFIG_RETHUNK is not set
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=m
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=y
# CONFIG_ACPI_DPTF is not set
CONFIG_ACPI_CONFIGFS=m
CONFIG_ACPI_PCC=y
# CONFIG_ACPI_FFH is not set
CONFIG_PMIC_OPREGION=y
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_BXT_WC_PMIC_OPREGION=y
CONFIG_X86_PM_TIMER=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_SCx200=m
# CONFIG_SCx200HR_TIMER is not set
# CONFIG_OLPC is not set
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_GEOS=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_COMPAT_32=y
# end of Binary Emulations

CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_TSO=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_WERROR is not set
# CONFIG_KVM_INTEL is not set
# CONFIG_KVM_AMD is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_XEN is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPLIT_ARG64=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT=4
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
# CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB_DEPRECATED is not set
# CONFIG_SLUB_TINY is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
# CONFIG_SLUB_CPU_PARTIAL is not set
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
# CONFIG_ZONE_DMA is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
CONFIG_SECRETMEM=y
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_INTERFACE=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=m
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_NV=m
# CONFIG_TCP_CONG_SCALABLE is not set
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
CONFIG_DEFAULT_VENO=y
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="veno"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=m
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=y
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
CONFIG_IPV6_SEG6_HMAC=y
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
CONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
# CONFIG_NF_CONNTRACK_LABELS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_SCTP=y
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_NAT_OVS=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
# CONFIG_NF_TABLES_INET is not set
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
# CONFIG_NFT_CT is not set
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=m
# CONFIG_NFT_LIMIT is not set
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
CONFIG_NFT_TUNNEL=y
# CONFIG_NFT_QUEUE is not set
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=y
CONFIG_NFT_HASH=y
CONFIG_NFT_FIB=y
CONFIG_NFT_XFRM=y
CONFIG_NFT_SOCKET=y
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
CONFIG_NFT_SYNPROXY=y
CONFIG_NF_DUP_NETDEV=y
CONFIG_NFT_DUP_NETDEV=y
# CONFIG_NFT_FWD_NETDEV is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
# CONFIG_IP_SET_BITMAP_IPMAC is not set
# CONFIG_IP_SET_BITMAP_PORT is not set
# CONFIG_IP_SET_HASH_IP is not set
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
# CONFIG_IP_SET_HASH_IPPORTNET is not set
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
# CONFIG_IP_SET_HASH_NET is not set
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
# CONFIG_IP_VS_PROTO_ESP is not set
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
# CONFIG_IP_VS_LBLCR is not set
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_MH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_TWOS=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_NFCT=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
# CONFIG_NFT_DUP_IPV4 is not set
CONFIG_NFT_FIB_IPV4=y
# CONFIG_NF_TABLES_ARP is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=y
# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
# CONFIG_NF_TABLES_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
# CONFIG_IP6_NF_MATCH_OPTS is not set
CONFIG_IP6_NF_MATCH_HL=m
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
# CONFIG_BRIDGE_NF_EBTABLES is not set
CONFIG_BPFILTER=y
CONFIG_BPFILTER_UMH=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_MEDIA_UDP is not set
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
# CONFIG_L2TP_V3 is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=m
# CONFIG_COPS is not set
CONFIG_IPDDP=m
# CONFIG_IPDDP_ENCAP is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
CONFIG_PHONET=y
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=m
# CONFIG_6LOWPAN_NHC_DEST is not set
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
# CONFIG_6LOWPAN_GHC_UDP is not set
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=m
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_CAKE=y
# CONFIG_NET_SCH_FQ is not set
CONFIG_NET_SCH_HHF=m
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=y
# CONFIG_NET_SCH_PLUG is not set
CONFIG_NET_SCH_ETS=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=m
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=y
CONFIG_NET_ACT_VLAN=y
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=y
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=y
CONFIG_NET_ACT_GATE=y
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
# CONFIG_BATMAN_ADV_DAT is not set
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=y
# CONFIG_OPENVSWITCH_GRE is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=y
CONFIG_HSR=m
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
# CONFIG_QRTR_MHI is not set
# CONFIG_NET_NCSI is not set
# CONFIG_PCPU_DEV_REFCNT is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=m
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_IPV6 is not set
CONFIG_AF_RXRPC_INJECT_LOSS=y
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
# CONFIG_RXPERF is not set
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_DEBUG=y
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
# CONFIG_NFC_NCI_UART is not set
# CONFIG_NFC_HCI is not set

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
# CONFIG_NFC_SIM is not set
CONFIG_NFC_VIRTUAL_NCI=m
# CONFIG_NFC_FDP is not set
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_ST_NCI_I2C is not set
# CONFIG_NFC_ST_NCI_SPI is not set
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
CONFIG_NFC_ST95HF=m
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=m
# CONFIG_ETHTOOL_NETLINK is not set

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
# CONFIG_PCIE_BUS_DEFAULT is not set
# CONFIG_PCIE_BUS_SAFE is not set
CONFIG_PCIE_BUS_PERFORMANCE=y
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_YENTA_O2 is not set
CONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_RAPIDIO=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
# CONFIG_RAPIDIO_CHMAN is not set
CONFIG_RAPIDIO_MPORT_CDEV=m

#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_CPS_XX is not set
CONFIG_RAPIDIO_CPS_GEN2=m
CONFIG_RAPIDIO_RXS_GEN3=m
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SOUNDWIRE_MBQ=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_MHI_BUS=y
# CONFIG_MHI_BUS_DEBUG is not set
CONFIG_MHI_BUS_PCI_GENERIC=y
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=m
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=m
# CONFIG_NFTL is not set
CONFIG_INFTL=m
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=y
CONFIG_MTD_SWAP=m
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=m
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
# CONFIG_MTD_SCx200_DOCFLASH is not set
# CONFIG_MTD_AMD76XROM is not set
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=y
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_DATAFLASH_OTP=y
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_MCHP48L640 is not set
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
# CONFIG_MTD_RAW_NAND is not set
CONFIG_MTD_SPI_NAND=y

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_MXIC is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
# CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE is not set
CONFIG_MTD_SPI_NOR_SWP_KEEP=y
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_HYPERBUS=y
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_FD_RAWCMD is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=m
CONFIG_DS1682=m
# CONFIG_VMWARE_BALLOON is not set
CONFIG_PCH_PHUB=y
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=m
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=m
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=m
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
CONFIG_VMWARE_VMCI=y
# CONFIG_ECHO is not set
CONFIG_BCM_VK=m
# CONFIG_BCM_VK_TTY is not set
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=m
# CONFIG_HABANA_AI is not set
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
# CONFIG_PVPANIC_PCI is not set
# CONFIG_GP_PCI1XXXX is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support

CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
CONFIG_SATA_INIC162X=m
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=m
# CONFIG_SATA_SX4 is not set
# CONFIG_ATA_BMDMA is not set

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_WINBOND_VLB=m

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_LEGACY=m
# CONFIG_MD is not set
CONFIG_TARGET_CORE=m
# CONFIG_TCM_IBLOCK is not set
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=m
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_RIONET is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_MHI_NET is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0_ISA is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_ADI=y
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2000 is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_ULTRA is not set
# CONFIG_WD80x3 is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC9194 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PSE_CONTROLLER is not set
CONFIG_CAN_DEV=m
# CONFIG_CAN_VCAN is not set
CONFIG_CAN_VXCAN=m
CONFIG_CAN_NETLINK=y
# CONFIG_CAN_CALC_BITTIMING is not set
CONFIG_CAN_RX_OFFLOAD=y
# CONFIG_CAN_CAN327 is not set
CONFIG_CAN_JANZ_ICAN3=m
CONFIG_CAN_KVASER_PCIEFD=m
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
# CONFIG_CAN_C_CAN_PCI is not set
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
# CONFIG_CAN_CC770_PLATFORM is not set
# CONFIG_CAN_CTUCANFD_PCI is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
# CONFIG_CAN_SJA1000 is not set
CONFIG_CAN_SOFTING=m

#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=m
CONFIG_CAN_MCP251X=m
CONFIG_CAN_MCP251XFD=m
# CONFIG_CAN_MCP251XFD_SANITY is not set
# end of CAN SPI interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_MDIO_DEVICE is not set

#
# PCS device drivers
#
# end of PCS device drivers

# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_USB4_NET is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_PINEPHONE is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=m
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_MEN_Z135 is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_GOLDFISH_TTY is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_RPMSG_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
# CONFIG_IPMI_IPMB is not set
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_SSIF_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=m
# CONFIG_HW_RANDOM is not set
CONFIG_DTLK=y
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
# CONFIG_DEVMEM is not set
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_KEMPLD is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
# CONFIG_I2C_CROS_EC_TUNNEL is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_SLAVE_TESTUNIT=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_PCI=m
CONFIG_SPI_DW_MMIO=m
# CONFIG_SPI_NXP_FLEXSPI is not set
CONFIG_SPI_GPIO=y
# CONFIG_SPI_INTEL_PCI is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_LANTIQ_SSC is not set
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PCI1XXXX is not set
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
# CONFIG_SPI_ROCKCHIP is not set
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_SIFIVE=y
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=m
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_LOOPBACK_TEST is not set
CONFIG_SPI_TLE62X0=m
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=m
# CONFIG_SPI_SLAVE_SYSTEM_CONTROL is not set
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
CONFIG_PINCTRL_DA9062=m
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08_SPI=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_MADERA=m
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L92=y

#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=m
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_MERRIFIELD=y
# CONFIG_PINCTRL_MOOREFIELD is not set
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_ALDERLAKE=m
CONFIG_PINCTRL_BROXTON=y
CONFIG_PINCTRL_CANNONLAKE=y
# CONFIG_PINCTRL_CEDARFORK is not set
CONFIG_PINCTRL_DENVERTON=y
CONFIG_PINCTRL_ELKHARTLAKE=m
# CONFIG_PINCTRL_EMMITSBURG is not set
CONFIG_PINCTRL_GEMINILAKE=y
CONFIG_PINCTRL_ICELAKE=y
# CONFIG_PINCTRL_JASPERLAKE is not set
CONFIG_PINCTRL_LAKEFIELD=m
CONFIG_PINCTRL_LEWISBURG=y
# CONFIG_PINCTRL_METEORLAKE is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_PINCTRL_TIGERLAKE=y
# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not set
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_MAX730X=m
CONFIG_GPIO_IDIO_16=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=m
# CONFIG_GPIO_EXAR is not set
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_ICH=m
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_SIOX=y
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=y
CONFIG_GPIO_SCH311X=m
# CONFIG_GPIO_WINBOND is not set
CONFIG_GPIO_WS16C48=m
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_MAX7300=m
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=m
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=m
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_BD9571MWV=m
# CONFIG_GPIO_CS5535 is not set
CONFIG_GPIO_DA9055=m
CONFIG_GPIO_JANZ_TTL=m
# CONFIG_GPIO_KEMPLD is not set
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_MADERA=m
CONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_RC5T583 is not set
# CONFIG_GPIO_TIMBERDALE is not set
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS6586X=y
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TQMX86 is not set
# CONFIG_GPIO_TWL4030 is not set
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WHISKEY_COVE=m
CONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_MERRIFIELD is not set
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_PCH=y
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=m
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_MAX3191X=y
CONFIG_GPIO_MAX7301=m
# CONFIG_GPIO_MC33880 is not set
CONFIG_GPIO_PISOSR=m
CONFIG_GPIO_XRA1403=y
# end of SPI GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
# CONFIG_GPIO_LATCH is not set
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=m
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves

CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
# CONFIG_POWER_RESET_TPS65086 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=m
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_88PM860X=m
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_CW2015=y
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=m
CONFIG_MANAGER_SBS=m
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_DA9030=m
CONFIG_CHARGER_AXP20X=m
CONFIG_BATTERY_AXP20X=m
CONFIG_AXP20X_POWER=m
CONFIG_AXP288_FUEL_GAUGE=m
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=m
CONFIG_BATTERY_MAX1721X=m
CONFIG_BATTERY_TWL4030_MADC=y
# CONFIG_CHARGER_88PM860X is not set
CONFIG_CHARGER_PCF50633=y
# CONFIG_BATTERY_RX51 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=m
CONFIG_CHARGER_MAX14577=y
# CONFIG_CHARGER_MAX77976 is not set
CONFIG_CHARGER_MP2629=m
# CONFIG_CHARGER_MT6360 is not set
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=m
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=m
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
CONFIG_CHARGER_SMB347=m
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=m
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
# CONFIG_CHARGER_CROS_USBPD is not set
CONFIG_CHARGER_CROS_PCHG=m
CONFIG_CHARGER_BD99954=y
# CONFIG_CHARGER_WILCO is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_AHT10=m
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=y
CONFIG_I8K=y
# CONFIG_SENSORS_DA9055 is not set
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_MC13783_ADC is not set
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_I5500=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=m
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2947_SPI=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX127=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=y
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=y
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_MR75203=m
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=y
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=m
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_OXP is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_BEL_PFE=m
CONFIG_SENSORS_BPA_RS600=m
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
CONFIG_SENSORS_FSP_3Y=m
CONFIG_SENSORS_IBM_CFFPS=m
# CONFIG_SENSORS_DPS920AB is not set
CONFIG_SENSORS_INSPUR_IPSPS=m
CONFIG_SENSORS_IR35221=m
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
CONFIG_SENSORS_IRPS5401=m
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
# CONFIG_SENSORS_LT7182S is not set
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX15301=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
# CONFIG_SENSORS_MAX20730 is not set
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31785=m
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
CONFIG_SENSORS_MP2888=m
# CONFIG_SENSORS_MP2975 is not set
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PLI1209BC is not set
CONFIG_SENSORS_PM6764TR=m
# CONFIG_SENSORS_PXE1610 is not set
CONFIG_SENSORS_Q54SJ108A2=m
CONFIG_SENSORS_STPDDC60=m
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
# CONFIG_SENSORS_TPS546D24 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_XDPE152 is not set
CONFIG_SENSORS_XDPE122=m
# CONFIG_SENSORS_XDPE122_REGULATOR is not set
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SBTSI=y
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHT4x=y
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=m
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_ADS7871=y
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=m
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
CONFIG_SENSORS_TMP513=y
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83773G=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_XGENE=m

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
# CONFIG_SENSORS_ASUS_WMI is not set
# CONFIG_SENSORS_ASUS_EC is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
CONFIG_INTEL_SOC_DTS_THERMAL=m

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_BXT_PMIC_THERMAL=m
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_INTEL_TCC_COOLING=m
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=m
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=y
# CONFIG_MENF21BMC_WATCHDOG is not set
# CONFIG_MENZ069_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
CONFIG_XILINX_WATCHDOG=m
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=y
# CONFIG_DW_WATCHDOG is not set
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_RETU_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
CONFIG_ADVANTECH_WDT=m
# CONFIG_ADVANTECH_EC_WDT is not set
CONFIG_ALIM1535_WDT=y
CONFIG_ALIM7101_WDT=m
CONFIG_EBC_C384_WDT=y
# CONFIG_EXAR_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_GEODE_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
# CONFIG_IE6XX_WDT is not set
# CONFIG_INTEL_MID_WATCHDOG is not set
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=y
# CONFIG_HPWDT_NMI_DECODING is not set
CONFIG_KEMPLD_WDT=m
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=y
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=y
CONFIG_SBC7240_WDT=y
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=y
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=y
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=y
CONFIG_INTEL_MEI_WDT=m
CONFIG_NI903X_WDT=m
CONFIG_NIC7018_WDT=y
CONFIG_MEN_A21_WDT=m

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=m
CONFIG_MFD_MADERA=m
# CONFIG_MFD_MADERA_I2C is not set
CONFIG_MFD_MADERA_SPI=m
# CONFIG_MFD_CS47L15 is not set
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=m
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=m
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=m
CONFIG_HTC_PASIC3=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC_BXTWC=m
CONFIG_INTEL_SOC_PMIC_MRFLD=m
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
CONFIG_MFD_INTEL_PMC_BXT=m
# CONFIG_MFD_IQS62X is not set
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=m
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=m
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=m
# CONFIG_MFD_OCELOT is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=m
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=m
# CONFIG_MFD_RT5120 is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=m
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=m
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=m
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS6586X=y
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TQMX86=m
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=m
CONFIG_MFD_WCD934X=m
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_88PM8607=m
CONFIG_REGULATOR_ACT8865=m
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ARIZONA_LDO1 is not set
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
# CONFIG_REGULATOR_AXP20X is not set
# CONFIG_REGULATOR_BCM590XX is not set
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_ISL9305=y
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8893 is not set
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77826 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=m
# CONFIG_REGULATOR_MP8859 is not set
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6315=m
# CONFIG_REGULATOR_MT6360 is not set
CONFIG_REGULATOR_PALMAS=y
# CONFIG_REGULATOR_PCA9450 is not set
# CONFIG_REGULATOR_PCF50633 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_QCOM_SPMI=y
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RT4801=y
# CONFIG_REGULATOR_RT5033 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6190 is not set
CONFIG_REGULATOR_RT6245=y
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
# CONFIG_REGULATOR_SKY81452 is not set
CONFIG_REGULATOR_SLG51000=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=m
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS6524X=y
# CONFIG_REGULATOR_TPS6586X is not set
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TWL4030 is not set
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=m
CONFIG_REGULATOR_QCOM_LABIBB=y
# CONFIG_RC_CORE is not set
CONFIG_CEC_CORE=m

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
# CONFIG_MEDIA_TEST_SUPPORT is not set
# end of Media device types

CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
# end of Video4Linux options

#
# Media controller options
#
# end of Media controller options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
CONFIG_MEDIA_PCI_SUPPORT=y
CONFIG_VIDEO_IPU3_CIO2=m
# CONFIG_CIO2_BRIDGE is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_SG=m
# end of Media drivers

#
# Media ancillary drivers
#

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SONY_BTF_MPX=m
CONFIG_VIDEO_TDA1997X=m
CONFIG_VIDEO_TDA7432=m
# CONFIG_VIDEO_TDA9840 is not set
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
# CONFIG_VIDEO_WM8739 is not set
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
CONFIG_VIDEO_ADV7183=m
# CONFIG_VIDEO_ADV7604 is not set
CONFIG_VIDEO_ADV7842=m
CONFIG_VIDEO_ADV7842_CEC=y
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
CONFIG_VIDEO_TC358743_CEC=y
# CONFIG_VIDEO_TC358746 is not set
CONFIG_VIDEO_TVP514X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_AD9389B=m
# CONFIG_VIDEO_ADV7170 is not set
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_ADV7511=m
# CONFIG_VIDEO_ADV7511_CEC is not set
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_THS8200=m
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips

#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=m
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_ST_MIPID02=m
# CONFIG_VIDEO_THS7303 is not set
# end of Miscellaneous helper chips

#
# Media SPI Adapters
#
# CONFIG_VIDEO_GS1662 is not set
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=m
# CONFIG_MEDIA_TUNER_IT913X is not set
CONFIG_MEDIA_TUNER_M88RS6000T=m
# CONFIG_MEDIA_TUNER_MAX2165 is not set
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MSI001=m
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_MEDIA_TUNER_TDA18218=m
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners
# end of Media ancillary drivers

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_SWITCHEROO=y
# CONFIG_DRM is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_AMS369FG06=y
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_LCD_OTM3225A=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_QCOM_WLED=m
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_SKY81452=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
# CONFIG_SND_PCM_TIMER is not set
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
# CONFIG_SND_CTL_DEBUG is not set
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
# CONFIG_SND_SEQ_HRTIMER_DEFAULT is not set
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_MIDI_EMUL=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_OPL4_LIB_SEQ=m
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_WSS_LIB=y
CONFIG_SND_SB_COMMON=y
CONFIG_SND_SB8_DSP=y
CONFIG_SND_SB16_DSP=y
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=y
# CONFIG_SND_ALS100 is not set
CONFIG_SND_AZT1605=y
# CONFIG_SND_AZT2316 is not set
CONFIG_SND_AZT2320=y
# CONFIG_SND_CMI8328 is not set
CONFIG_SND_CMI8330=y
CONFIG_SND_CS4231=m
CONFIG_SND_CS4236=y
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
CONFIG_SND_SC6000=y
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=y
CONFIG_SND_GUSMAX=y
CONFIG_SND_INTERWAVE=m
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_JAZZ16 is not set
CONFIG_SND_OPL3SA2=y
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=y
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
CONFIG_SND_SSCAPE=y
CONFIG_SND_WAVEFRONT=y
CONFIG_SND_MSND_PINNACLE=m
# CONFIG_SND_MSND_CLASSIC is not set
# CONFIG_SND_PCI is not set

#
# HD-Audio
#
# end of HD-Audio

CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=y
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=y
CONFIG_SND_SPI=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_ACPI=y
CONFIG_SND_SOC_ADI=y
# CONFIG_SND_SOC_ADI_AXI_I2S is not set
CONFIG_SND_SOC_ADI_AXI_SPDIF=y
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_SOC_AMD_ACP3x is not set
# CONFIG_SND_SOC_AMD_RENOIR is not set
# CONFIG_SND_SOC_AMD_ACP5x is not set
# CONFIG_SND_SOC_AMD_ACP6x is not set
# CONFIG_SND_AMD_ACP_CONFIG is not set
# CONFIG_SND_SOC_AMD_ACP_COMMON is not set
# CONFIG_SND_SOC_AMD_RPL_ACP6x is not set
# CONFIG_SND_SOC_AMD_PS is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
# CONFIG_SND_SOC_FSL_SAI is not set
CONFIG_SND_SOC_FSL_AUDMIX=y
# CONFIG_SND_SOC_FSL_SSI is not set
CONFIG_SND_SOC_FSL_SPDIF=m
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_FSL_MICFIL=y
# CONFIG_SND_SOC_FSL_EASRC is not set
CONFIG_SND_SOC_FSL_XCVR=m
CONFIG_SND_SOC_FSL_UTILS=y
# CONFIG_SND_SOC_FSL_RPMSG is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=y
CONFIG_SND_SOC_IMG=y
# CONFIG_SND_SOC_IMG_I2S_IN is not set
# CONFIG_SND_SOC_IMG_I2S_OUT is not set
CONFIG_SND_SOC_IMG_PARALLEL_OUT=y
CONFIG_SND_SOC_IMG_SPDIF_IN=y
# CONFIG_SND_SOC_IMG_SPDIF_OUT is not set
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=m
# CONFIG_SND_SOC_INTEL_SST_TOPLEVEL is not set
CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
# CONFIG_SND_SOC_INTEL_AVS is not set
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
# CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH is not set
# CONFIG_SND_SOC_MTK_BTCVSD is not set
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI_DEV=m
CONFIG_SND_SOC_SOF_PCI=m
CONFIG_SND_SOC_SOF_ACPI=y
CONFIG_SND_SOC_SOF_ACPI_DEV=y
CONFIG_SND_SOC_SOF_DEBUG_PROBES=m
CONFIG_SND_SOC_SOF_CLIENT=m
# CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT is not set
CONFIG_SND_SOC_SOF=y
CONFIG_SND_SOC_SOF_IPC3=y
CONFIG_SND_SOC_SOF_INTEL_IPC4=y
# CONFIG_SND_SOC_SOF_AMD_TOPLEVEL is not set
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=y
CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=y
CONFIG_SND_SOC_SOF_INTEL_COMMON=y
CONFIG_SND_SOC_SOF_BAYTRAIL=y
# CONFIG_SND_SOC_SOF_BROADWELL is not set
CONFIG_SND_SOC_SOF_MERRIFIELD=m
CONFIG_SND_SOC_SOF_INTEL_SKL=m
CONFIG_SND_SOC_SOF_SKYLAKE=m
CONFIG_SND_SOC_SOF_KABYLAKE=m
CONFIG_SND_SOC_SOF_INTEL_APL=m
CONFIG_SND_SOC_SOF_APOLLOLAKE=m
CONFIG_SND_SOC_SOF_GEMINILAKE=m
CONFIG_SND_SOC_SOF_INTEL_CNL=m
# CONFIG_SND_SOC_SOF_CANNONLAKE is not set
CONFIG_SND_SOC_SOF_COFFEELAKE=m
CONFIG_SND_SOC_SOF_COMETLAKE=m
CONFIG_SND_SOC_SOF_INTEL_ICL=m
CONFIG_SND_SOC_SOF_ICELAKE=m
CONFIG_SND_SOC_SOF_JASPERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_TGL=m
CONFIG_SND_SOC_SOF_TIGERLAKE=m
CONFIG_SND_SOC_SOF_ELKHARTLAKE=m
CONFIG_SND_SOC_SOF_ALDERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_MTL=m
CONFIG_SND_SOC_SOF_METEORLAKE=m
CONFIG_SND_SOC_SOF_HDA_COMMON=m
# CONFIG_SND_SOC_SOF_HDA_LINK is not set
CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_HDA_PROBES=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=m
# CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE is not set
CONFIG_SND_SOC_SOF_XTENSA=y

#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support

# CONFIG_SND_SOC_XILINX_I2S is not set
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
# CONFIG_SND_SOC_AC97_CODEC is not set
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1372_SPI=m
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
# CONFIG_SND_SOC_ADAU1761_SPI is not set
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_AK4104=m
# CONFIG_SND_SOC_AK4118 is not set
# CONFIG_SND_SOC_AK4375 is not set
CONFIG_SND_SOC_AK4458=y
# CONFIG_SND_SOC_AK4554 is not set
CONFIG_SND_SOC_AK4613=y
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_AW8738 is not set
# CONFIG_SND_SOC_BD28623 is not set
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CROS_EC_CODEC=y
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=y
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=y
# CONFIG_SND_SOC_CS35L41_SPI is not set
# CONFIG_SND_SOC_CS35L41_I2C is not set
# CONFIG_SND_SOC_CS35L45_SPI is not set
# CONFIG_SND_SOC_CS35L45_I2C is not set
CONFIG_SND_SOC_CS42L42_CORE=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
CONFIG_SND_SOC_CS42L73=y
# CONFIG_SND_SOC_CS42L83 is not set
CONFIG_SND_SOC_CS4234=m
CONFIG_SND_SOC_CS4265=m
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=m
# CONFIG_SND_SOC_CS4341 is not set
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not set
CONFIG_SND_SOC_CX2072X=y
CONFIG_SND_SOC_DA7213=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
# CONFIG_SND_SOC_ES8326 is not set
CONFIG_SND_SOC_ES8328=m
# CONFIG_SND_SOC_ES8328_I2C is not set
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_GTM601=y
# CONFIG_SND_SOC_HDA is not set
CONFIG_SND_SOC_ICS43432=y
CONFIG_SND_SOC_INNO_RK3036=m
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98927=m
# CONFIG_SND_SOC_MAX98520 is not set
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
CONFIG_SND_SOC_MAX98373_SDW=m
# CONFIG_SND_SOC_MAX98390 is not set
# CONFIG_SND_SOC_MAX98396 is not set
CONFIG_SND_SOC_MAX9860=m
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM1681=y
# CONFIG_SND_SOC_PCM1789_I2C is not set
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
# CONFIG_SND_SOC_PCM179X_SPI is not set
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
# CONFIG_SND_SOC_PCM186X_SPI is not set
CONFIG_SND_SOC_PCM3060=m
# CONFIG_SND_SOC_PCM3060_I2C is not set
CONFIG_SND_SOC_PCM3060_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM5102A is not set
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_PCM512x_SPI=y
CONFIG_SND_SOC_RK3328=m
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT1308_SDW=m
CONFIG_SND_SOC_RT1316_SDW=m
# CONFIG_SND_SOC_RT1318_SDW is not set
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
# CONFIG_SND_SOC_RT5640 is not set
CONFIG_SND_SOC_RT5659=y
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_SDW=m
# CONFIG_SND_SOC_RT700_SDW is not set
# CONFIG_SND_SOC_RT711_SDW is not set
CONFIG_SND_SOC_RT711_SDCA_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
CONFIG_SND_SOC_RT715_SDCA_SDW=m
# CONFIG_SND_SOC_RT9120 is not set
# CONFIG_SND_SOC_SDW_MOCKUP is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIMPLE_MUX=m
CONFIG_SND_SOC_SPDIF=m
# CONFIG_SND_SOC_SRC4XXX_I2C is not set
CONFIG_SND_SOC_SSM2305=m
CONFIG_SND_SOC_SSM2518=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA32X is not set
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
# CONFIG_SND_SOC_TAS2552 is not set
CONFIG_SND_SOC_TAS2562=m
CONFIG_SND_SOC_TAS2764=m
CONFIG_SND_SOC_TAS2770=m
# CONFIG_SND_SOC_TAS2780 is not set
# CONFIG_SND_SOC_TAS5086 is not set
CONFIG_SND_SOC_TAS571X=y
CONFIG_SND_SOC_TAS5720=m
# CONFIG_SND_SOC_TAS5805M is not set
CONFIG_SND_SOC_TAS6424=m
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=m
# CONFIG_SND_SOC_TFA989X is not set
# CONFIG_SND_SOC_TLV320ADC3XXX is not set
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC32X4_SPI=m
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TLV320AIC3X_I2C=m
CONFIG_SND_SOC_TLV320AIC3X_SPI=y
# CONFIG_SND_SOC_TLV320ADCX140 is not set
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_TSCS42XX=m
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_UDA1334 is not set
# CONFIG_SND_SOC_WCD9335 is not set
CONFIG_SND_SOC_WCD_MBHC=m
CONFIG_SND_SOC_WCD934X=m
CONFIG_SND_SOC_WCD938X=m
CONFIG_SND_SOC_WCD938X_SDW=m
# CONFIG_SND_SOC_WM8510 is not set
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
# CONFIG_SND_SOC_WM8580 is not set
CONFIG_SND_SOC_WM8711=m
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731_I2C is not set
# CONFIG_SND_SOC_WM8731_SPI is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
# CONFIG_SND_SOC_WM8782 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8940=y
# CONFIG_SND_SOC_WM8960 is not set
CONFIG_SND_SOC_WM8961=y
# CONFIG_SND_SOC_WM8962 is not set
CONFIG_SND_SOC_WM8974=y
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_WSA881X=m
# CONFIG_SND_SOC_WSA883X is not set
CONFIG_SND_SOC_ZL38060=m
CONFIG_SND_SOC_MAX9759=m
# CONFIG_SND_SOC_MT6351 is not set
CONFIG_SND_SOC_MT6358=y
CONFIG_SND_SOC_MT6660=m
CONFIG_SND_SOC_NAU8315=y
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
# CONFIG_SND_SOC_NAU8821 is not set
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
CONFIG_SND_SOC_LPASS_VA_MACRO=y
CONFIG_SND_SOC_LPASS_RX_MACRO=m
CONFIG_SND_SOC_LPASS_TX_MACRO=m
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_X86 is not set
# CONFIG_SND_VIRTIO is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers

#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y

#
# USB dual-mode controller drivers
#

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
# CONFIG_MMC_CRYPTO is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_SDHCI_F_SDH30=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_ALCOR=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_USDHI6ROL0=m
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_CQHCI=m
CONFIG_MMC_HSQ=m
CONFIG_MMC_TOSHIBA_PCI=m
CONFIG_MMC_MTK=m
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_APU=y
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=y
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP50XX=m
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=m
CONFIG_LEDS_MENF21BMC=m
# CONFIG_LEDS_IS31FL319X is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXCPLD=y
CONFIG_LEDS_MLXREG=m
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
# CONFIG_LEDS_TPS6105X is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y

#
# Speakup console speech
#
# end of Speakup console speech

# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_DEBUG=y
# CONFIG_RTC_NVMEM is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=m
# CONFIG_RTC_DRV_88PM80X is not set
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=m
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_PALMAS=m
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=m
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
CONFIG_RTC_DRV_RV3032=m
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=m
# CONFIG_RTC_DRV_MAX6916 is not set
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RX4581=y
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=y
# CONFIG_RTC_DRV_RV3029C2 is not set
CONFIG_RTC_DRV_RX6110=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9055=m
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=y
# CONFIG_RTC_DRV_V3020 is not set
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_CROS_EC=y

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_MC13XXX=y

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_RTC_DRV_WILCO_EC is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
# CONFIG_DMABUF_HEAPS_SYSTEM is not set
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=m
CONFIG_HD44780_COMMON=m
# CONFIG_HD44780 is not set
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_LCD2S=m
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_CHARLCD_BL_OFF=y
# CONFIG_CHARLCD_BL_ON is not set
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_PANEL=m
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
# CONFIG_UIO_MF624 is not set
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=m
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_ACPI is not set
CONFIG_CHROMEOS_LAPTOP=y
CONFIG_CHROMEOS_PSTORE=m
# CONFIG_CHROMEOS_TBMC is not set
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_SPI=m
CONFIG_CROS_EC_LPC=y
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
# CONFIG_CROS_EC_CHARDEV is not set
CONFIG_CROS_EC_LIGHTBAR=m
# CONFIG_CROS_EC_DEBUGFS is not set
CONFIG_CROS_EC_SENSORHUB=m
CONFIG_CROS_EC_SYSFS=m
# CONFIG_CROS_HPS_I2C is not set
CONFIG_CROS_USBPD_NOTIFY=m
CONFIG_WILCO_EC=m
CONFIG_WILCO_EC_DEBUGFS=m
CONFIG_WILCO_EC_EVENTS=m
CONFIG_WILCO_EC_TELEMETRY=m
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_SURFACE_PLATFORMS is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
# CONFIG_WMI_BMOF is not set
# CONFIG_MXM_WMI is not set
# CONFIG_PEAQ_WMI is not set
# CONFIG_XIAOMI_WMI is not set
CONFIG_GIGABYTE_WMI=m
# CONFIG_YOGABOOK_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ACER_WMI is not set
# CONFIG_AMD_PMF is not set
# CONFIG_AMD_PMC is not set
# CONFIG_ADV_SWBUTTON is not set
CONFIG_APPLE_GMUX=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_MERAKI_MX100 is not set
CONFIG_X86_PLATFORM_DRIVERS_DELL=y
# CONFIG_ALIENWARE_WMI is not set
CONFIG_DCDBAS=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_RBU is not set
CONFIG_DELL_RBTN=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_SMBIOS_WMI=y
# CONFIG_DELL_SMBIOS_SMM is not set
# CONFIG_DELL_SMO8800 is not set
CONFIG_DELL_WMI=m
# CONFIG_DELL_WMI_PRIVACY is not set
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_WMI_DESCRIPTOR=m
CONFIG_DELL_WMI_LED=m
CONFIG_DELL_WMI_SYSMAN=m
CONFIG_AMILO_RFKILL=m
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
CONFIG_GPD_POCKET_FAN=m
# CONFIG_X86_PLATFORM_DRIVERS_HP is not set
# CONFIG_WIRELESS_HOTKEY is not set
# CONFIG_IBM_RTL is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_THINKPAD_LMI is not set
CONFIG_INTEL_ATOMISP2_PDX86=y
CONFIG_INTEL_ATOMISP2_PM=m
# CONFIG_INTEL_SAR_INT1092 is not set
# CONFIG_INTEL_SKL_INT3472 is not set
# CONFIG_INTEL_PMC_CORE is not set
CONFIG_INTEL_WMI=y
CONFIG_INTEL_WMI_SBL_FW_UPDATE=m
# CONFIG_INTEL_WMI_THUNDERBOLT is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_INT0002_VGPIO=y
CONFIG_INTEL_OAKTRAIL=m
CONFIG_INTEL_BXTWC_PMIC_TMU=m
# CONFIG_INTEL_MRFLD_PWRBTN is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_VSEC is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_MSI_WMI is not set
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_SAMSUNG_Q10=y
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
# CONFIG_ACPI_CMPC is not set
CONFIG_COMPAL_LAPTOP=m
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_SERIAL_MULTI_INSTANTIATE is not set
CONFIG_MLX_PLATFORM=m
CONFIG_FW_ATTR_CLASS=m
CONFIG_INTEL_IPS=y
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
# CONFIG_INTEL_SCU_PLATFORM is not set
CONFIG_INTEL_SCU_IPC_UTIL=y
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_WINMATE_FM07_KEYS is not set
CONFIG_P2SB=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_LMK04832=m
CONFIG_COMMON_CLK_MAX9485=y
# CONFIG_COMMON_CLK_SI5341 is not set
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CS2000_CP=m
CONFIG_CLK_TWL6040=y
# CONFIG_COMMON_CLK_PALMAS is not set
CONFIG_XILINX_VCU=m
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=m

#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_CADENCE=m
CONFIG_SOUNDWIRE_INTEL=m
CONFIG_SOUNDWIRE_QCOM=m
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=m

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_AXP288 is not set
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_INTEL_MRFLD=m
# CONFIG_EXTCON_MAX14577 is not set
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_USBC_CROS_EC=m
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=m
# CONFIG_IIO_BUFFER_DMAENGINE is not set
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
# CONFIG_IIO_SW_TRIGGER is not set
CONFIG_IIO_TRIGGERED_EVENT=m

#
# Accelerometers
#
CONFIG_ADIS16201=y
# CONFIG_ADIS16209 is not set
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL313_SPI is not set
CONFIG_ADXL345=y
CONFIG_ADXL345_I2C=y
CONFIG_ADXL345_SPI=y
# CONFIG_ADXL355_I2C is not set
# CONFIG_ADXL355_SPI is not set
# CONFIG_ADXL367_SPI is not set
# CONFIG_ADXL367_I2C is not set
CONFIG_ADXL372=m
CONFIG_ADXL372_SPI=m
# CONFIG_ADXL372_I2C is not set
# CONFIG_BMA180 is not set
CONFIG_BMA220=m
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMA400_SPI=y
# CONFIG_BMC150_ACCEL is not set
CONFIG_BMI088_ACCEL=m
CONFIG_BMI088_ACCEL_SPI=m
CONFIG_DA280=y
CONFIG_DA311=m
# CONFIG_DMARD06 is not set
CONFIG_DMARD09=m
# CONFIG_DMARD10 is not set
CONFIG_FXLS8962AF=y
CONFIG_FXLS8962AF_I2C=y
# CONFIG_FXLS8962AF_SPI is not set
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
# CONFIG_IIO_KX022A_SPI is not set
# CONFIG_IIO_KX022A_I2C is not set
CONFIG_KXSD9=m
CONFIG_KXSD9_SPI=m
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=y
# CONFIG_MC3230 is not set
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=y
CONFIG_MMA7660=m
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
# CONFIG_MSA311 is not set
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=y
CONFIG_SCA3000=m
CONFIG_SCA3300=y
# CONFIG_STK8312 is not set
# CONFIG_STK8BA50 is not set
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD4130 is not set
CONFIG_AD7091R5=m
CONFIG_AD7124=y
# CONFIG_AD7192 is not set
# CONFIG_AD7266 is not set
# CONFIG_AD7280 is not set
# CONFIG_AD7291 is not set
# CONFIG_AD7292 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7606_IFACE_PARALLEL is not set
# CONFIG_AD7606_IFACE_SPI is not set
# CONFIG_AD7766 is not set
# CONFIG_AD7768_1 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7791 is not set
CONFIG_AD7793=y
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
CONFIG_AD7949=y
CONFIG_AD799X=m
CONFIG_AXP20X_ADC=m
# CONFIG_AXP288_ADC is not set
CONFIG_CC10001_ADC=y
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HI8435=m
# CONFIG_HX711 is not set
CONFIG_INA2XX_ADC=y
CONFIG_INTEL_MRFLD_ADC=m
CONFIG_LTC2471=m
CONFIG_LTC2485=m
CONFIG_LTC2496=m
CONFIG_LTC2497=y
CONFIG_MAX1027=m
CONFIG_MAX11100=m
# CONFIG_MAX1118 is not set
# CONFIG_MAX11205 is not set
# CONFIG_MAX11410 is not set
CONFIG_MAX1241=m
# CONFIG_MAX1363 is not set
CONFIG_MAX9611=y
CONFIG_MCP320X=m
# CONFIG_MCP3422 is not set
CONFIG_MCP3911=m
CONFIG_MEDIATEK_MT6360_ADC=m
# CONFIG_MEN_Z188_ADC is not set
CONFIG_MP2629_ADC=m
CONFIG_NAU7802=m
# CONFIG_PALMAS_GPADC is not set
CONFIG_QCOM_VADC_COMMON=m
# CONFIG_QCOM_SPMI_IADC is not set
CONFIG_QCOM_SPMI_VADC=m
# CONFIG_QCOM_SPMI_ADC5 is not set
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_SD_ADC_MODULATOR is not set
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC084S021=y
CONFIG_TI_ADC12138=m
CONFIG_TI_ADC108S102=y
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TI_ADC161S626 is not set
CONFIG_TI_ADS1015=y
CONFIG_TI_ADS7950=m
# CONFIG_TI_ADS8344 is not set
# CONFIG_TI_ADS8688 is not set
# CONFIG_TI_ADS124S08 is not set
# CONFIG_TI_ADS131E08 is not set
# CONFIG_TI_TLC4541 is not set
CONFIG_TI_TSC2046=y
CONFIG_TWL4030_MADC=y
# CONFIG_TWL6030_GPADC is not set
# CONFIG_VF610_ADC is not set
CONFIG_XILINX_XADC=m
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
# CONFIG_AD74115 is not set
# CONFIG_AD74413R is not set
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_AD8366=m
# CONFIG_ADA4250 is not set
CONFIG_HMC425=m
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=m
# CONFIG_AD7746 is not set
# end of Capacitance to digital converters

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_ATLAS_EZO_SENSOR is not set
# CONFIG_BME680 is not set
# CONFIG_CCS811 is not set
CONFIG_IAQCORE=y
# CONFIG_SCD30_CORE is not set
# CONFIG_SCD4X is not set
CONFIG_SENSIRION_SGP30=y
# CONFIG_SENSIRION_SGP40 is not set
CONFIG_SPS30=y
CONFIG_SPS30_I2C=y
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors

CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=m

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
# CONFIG_AD3552R is not set
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
CONFIG_AD5380=y
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=m
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_LTC2688 is not set
CONFIG_AD5686=y
# CONFIG_AD5686_SPI is not set
CONFIG_AD5696_I2C=y
CONFIG_AD5755=m
# CONFIG_AD5758 is not set
CONFIG_AD5761=m
CONFIG_AD5764=m
# CONFIG_AD5766 is not set
# CONFIG_AD5770R is not set
CONFIG_AD5791=m
# CONFIG_AD7293 is not set
# CONFIG_AD7303 is not set
# CONFIG_AD8801 is not set
# CONFIG_DPOT_DAC is not set
CONFIG_DS4424=m
CONFIG_LTC1660=m
CONFIG_LTC2632=m
CONFIG_M62332=y
CONFIG_MAX517=m
# CONFIG_MAX5821 is not set
CONFIG_MCP4725=m
# CONFIG_MCP4922 is not set
CONFIG_TI_DAC082S085=m
CONFIG_TI_DAC5571=m
CONFIG_TI_DAC7311=m
CONFIG_TI_DAC7612=y
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters

#
# IIO dummy driver
#
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m
CONFIG_ADF4371=y
# CONFIG_ADF4377 is not set
# CONFIG_ADMV1013 is not set
# CONFIG_ADMV4420 is not set
# CONFIG_ADRF6780 is not set
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=m
CONFIG_ADIS16136=y
# CONFIG_ADIS16260 is not set
CONFIG_ADXRS290=m
CONFIG_ADXRS450=y
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4403=m
CONFIG_AFE4404=y
CONFIG_MAX30100=m
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
# CONFIG_AM2315 is not set
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
CONFIG_HDC2010=m
# CONFIG_HTS221 is not set
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
CONFIG_SI7020=m
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_ADIS16400=m
# CONFIG_ADIS16460 is not set
CONFIG_ADIS16475=m
# CONFIG_ADIS16480 is not set
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BMI160_SPI=y
# CONFIG_BOSCH_BNO055_I2C is not set
# CONFIG_FXOS8700_I2C is not set
# CONFIG_FXOS8700_SPI is not set
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
# CONFIG_INV_ICM42600_I2C is not set
CONFIG_INV_ICM42600_SPI=m
CONFIG_INV_MPU6050_IIO=y
# CONFIG_INV_MPU6050_I2C is not set
CONFIG_INV_MPU6050_SPI=y
# CONFIG_IIO_ST_LSM6DSX is not set
CONFIG_IIO_ST_LSM9DS0=m
CONFIG_IIO_ST_LSM9DS0_I2C=m
CONFIG_IIO_ST_LSM9DS0_SPI=m
# end of Inertial measurement units

CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=m
CONFIG_AL3010=m
CONFIG_AL3320A=m
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
CONFIG_AS73211=y
# CONFIG_BH1750 is not set
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
CONFIG_CM3232=y
CONFIG_CM3323=m
# CONFIG_CM3605 is not set
CONFIG_CM36651=m
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_GP2AP002=m
CONFIG_GP2AP020A00F=y
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=y
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=y
# CONFIG_LTRF216A is not set
CONFIG_LV0104CS=m
# CONFIG_MAX44000 is not set
# CONFIG_MAX44009 is not set
# CONFIG_NOA1305 is not set
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=m
# CONFIG_SI1133 is not set
CONFIG_SI1145=y
# CONFIG_STK3310 is not set
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
CONFIG_TCS3414=m
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2591=y
# CONFIG_TSL2772 is not set
CONFIG_TSL4531=m
CONFIG_US5182D=y
CONFIG_VCNL4000=m
CONFIG_VCNL4035=y
# CONFIG_VEML6030 is not set
CONFIG_VEML6070=y
# CONFIG_VL6180 is not set
CONFIG_ZOPT2201=m
# end of Light sensors

#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=m
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=m
# CONFIG_BMC150_MAGN_I2C is not set
CONFIG_BMC150_MAGN_SPI=m
CONFIG_MAG3110=m
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
# CONFIG_SENSORS_RM3100_SPI is not set
CONFIG_YAMAHA_YAS530=m
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone

#
# Linear and angular position sensors
#
# end of Linear and angular position sensors

#
# Digital potentiometers
#
# CONFIG_AD5110 is not set
CONFIG_AD5272=y
CONFIG_DS1803=m
# CONFIG_MAX5432 is not set
CONFIG_MAX5481=y
CONFIG_MAX5487=m
CONFIG_MCP4018=m
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
CONFIG_MCP41010=m
CONFIG_TPL0102=m
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_IIO_CROS_EC_BARO=m
CONFIG_DLHL60D=m
# CONFIG_DPS310 is not set
CONFIG_HP03=m
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=m
CONFIG_MPL3115=m
CONFIG_MS5611=y
# CONFIG_MS5611_I2C is not set
# CONFIG_MS5611_SPI is not set
CONFIG_MS5637=m
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
CONFIG_HP206C=m
# CONFIG_ZPA2326 is not set
# end of Pressure sensors

#
# Lightning sensors
#
# CONFIG_AS3935 is not set
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=y
CONFIG_ISL29501=m
CONFIG_LIDAR_LITE_V2=y
# CONFIG_MB1232 is not set
CONFIG_PING=m
CONFIG_RFD77402=m
CONFIG_SRF04=y
CONFIG_SX_COMMON=m
CONFIG_SX9310=m
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
CONFIG_SX9500=m
# CONFIG_SRF08 is not set
CONFIG_VCNL3020=y
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=m
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_LTC2983 is not set
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_MLX90614=m
CONFIG_MLX90632=y
CONFIG_TMP006=y
# CONFIG_TMP007 is not set
CONFIG_TMP117=y
CONFIG_TSYS01=y
CONFIG_TSYS02D=m
# CONFIG_MAX30208 is not set
# CONFIG_MAX31856 is not set
# CONFIG_MAX31865 is not set
# end of Temperature sensors

# CONFIG_NTB is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_MADERA_IRQ=m
# end of IRQ chip support

CONFIG_IPACK_BUS=m
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_TI_SYSCON=m
# CONFIG_RESET_TI_TPS380X is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_USB_LGM_PHY is not set
CONFIG_PHY_CAN_TRANSCEIVER=m

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_CPCAP_USB is not set
CONFIG_PHY_INTEL_LGM_EMMC=y
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=m
# CONFIG_MCB_LPC is not set

#
# Performance monitor support
#
# end of Performance monitor support

# CONFIG_RAS is not set
CONFIG_USB4=y
# CONFIG_USB4_DEBUGFS_WRITE is not set
# CONFIG_USB4_DMA_TEST is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_RMEM=y
# CONFIG_NVMEM_SPMI_SDAM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
# CONFIG_INTEL_TH_MSU is not set
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

CONFIG_FPGA=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_FPGA_MGR_ALTERA_PS_SPI=y
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_MGR_XILINX_SPI=m
CONFIG_FPGA_MGR_MACHXO2_SPI=m
# CONFIG_FPGA_BRIDGE is not set
# CONFIG_FPGA_DFL is not set
# CONFIG_FPGA_MGR_MICROCHIP_SPI is not set
# CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_ADGS1408=m
CONFIG_MUX_GPIO=y
# end of Multiplexer drivers

CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
# CONFIG_INTERCONNECT is not set
CONFIG_COUNTER=y
# CONFIG_INTERRUPT_CNT is not set
CONFIG_INTEL_QEP=y
CONFIG_MOST=y
# CONFIG_MOST_CDEV is not set
# CONFIG_MOST_SND is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT2 is not set
# CONFIG_EXT4_FS_POSIX_ACL is not set
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_FS_O2CB is not set
# CONFIG_OCFS2_FS_USERSPACE_CLUSTER is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
# CONFIG_F2FS_FS_XATTR is not set
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FAULT_INJECTION=y
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
CONFIG_OVERLAY_FS_METACOPY=y

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
# CONFIG_JFFS2_CMODE_PRIORITY is not set
CONFIG_JFFS2_CMODE_SIZE=y
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
# CONFIG_UBIFS_FS_XATTR is not set
CONFIG_UBIFS_FS_AUTHENTICATION=y
CONFIG_CRAMFS=m
# CONFIG_CRAMFS_BLOCKDEV is not set
# CONFIG_CRAMFS_MTD is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=m
# CONFIG_PSTORE_LZO_COMPRESS is not set
CONFIG_PSTORE_LZ4_COMPRESS=m
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_EROFS_FS=m
CONFIG_EROFS_FS_DEBUG=y
# CONFIG_EROFS_FS_XATTR is not set
# CONFIG_EROFS_FS_ZIP is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_ROOT_NFS is not set
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFS_V4_2_READ_PLUS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=m
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
# CONFIG_AFS_DEBUG_CURSOR is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
# CONFIG_DLM_DEPRECATED_API is not set
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECDSA=y
# CONFIG_CRYPTO_ECRDSA is not set
CONFIG_CRYPTO_SM2=y
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=m
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=m
# CONFIG_CRYPTO_ECHAINIV is not set
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_VMAC=y
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression

#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y

#
# Accelerated Cryptographic Algorithms for CPU (x86)
#
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_CRC32C_INTEL=m
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# end of Accelerated Cryptographic Algorithms for CPU (x86)

# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
# CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_GF128MUL=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_INFO_COMPRESSED_NONE=y
# CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=8192
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not set
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
CONFIG_UBSAN_UNREACHABLE=y
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SLUB_DEBUG is not set
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_MAPLE_TREE is not set
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_DEBUG_KMAP_LOCAL=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_LIST is not set
CONFIG_TORTURE_TEST=m
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_LATENCYTOP=y
# CONFIG_DEBUG_CGROUP_REF is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_BPF_KPROBE_OVERRIDE=y
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_GCOV_PROFILE_FTRACE is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_RV is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set

#
# x86 Debugging
#
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking