[PULL 19/34] target/arm: Fix checkpatch space errors in helper.c

[Peter Maydell <peter.maydell@linaro.org>]

From: Fabiano Rosas <farosas@suse.de>

Fix the following:

ERROR: spaces required around that '|' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that '+' (ctx:VxB)
ERROR: space prohibited between function name and open parenthesis '('

(the last two still have some occurrences in macros which I left
behind because it might impact readability)

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/helper.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index a5f96ab77dd..8f1cc2d7cfb 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -205,7 +205,7 @@ static void add_cpreg_to_list(gpointer key, gpointer opaque)
     uint32_t regidx = (uintptr_t)key;
     const ARMCPRegInfo *ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
 
-    if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) {
+    if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) {
         cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx);
         /* The value array need not be initialized at this point */
         cpu->cpreg_array_len++;
@@ -219,7 +219,7 @@ static void count_cpreg(gpointer key, gpointer opaque)
 
     ri = g_hash_table_lookup(cpu->cp_regs, key);
 
-    if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) {
+    if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) {
         cpu->cpreg_array_len++;
     }
 }
@@ -2350,11 +2350,11 @@ static const ARMCPRegInfo v6k_cp_reginfo[] = {
       .resetfn = arm_cp_reset_ignore },
     { .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0,
-      .access = PL0_R|PL1_W,
+      .access = PL0_R | PL1_W,
       .fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el[0]),
       .resetvalue = 0},
     { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3,
-      .access = PL0_R|PL1_W,
+      .access = PL0_R | PL1_W,
       .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidruro_s),
                              offsetoflow32(CPUARMState, cp15.tpidruro_ns) },
       .resetfn = arm_cp_reset_ignore },
@@ -4315,17 +4315,17 @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = {
       .resetvalue = 0 },
     /* The cache ops themselves: these all NOP for QEMU */
     { .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0,
-      .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+      .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
     { .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0,
-      .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+      .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
     { .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0,
-      .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+      .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
     { .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1,
-      .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+      .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
     { .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2,
-      .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+      .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
     { .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0,
-      .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+      .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT },
 };
 
 static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = {
@@ -8695,7 +8695,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             ARMCPRegInfo cbar = {
                 .name = "CBAR",
                 .cp = 15, .crn = 15, .crm = 0, .opc1 = 4, .opc2 = 0,
-                .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar,
+                .access = PL1_R | PL3_W, .resetvalue = cpu->reset_cbar,
                 .fieldoffset = offsetof(CPUARMState,
                                         cp15.c15_config_base_address)
             };
@@ -9673,11 +9673,11 @@ static void switch_mode(CPUARMState *env, int mode)
         return;
 
     if (old_mode == ARM_CPU_MODE_FIQ) {
-        memcpy (env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t));
-        memcpy (env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t));
+        memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t));
+        memcpy(env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t));
     } else if (mode == ARM_CPU_MODE_FIQ) {
-        memcpy (env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t));
-        memcpy (env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t));
+        memcpy(env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t));
+        memcpy(env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t));
     }
 
     i = bank_number(old_mode);
@@ -11181,7 +11181,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
     RESULT(sum, n, 16); \
     if (sum >= 0) \
         ge |= 3 << (n * 2); \
-    } while(0)
+    } while (0)
 
 #define SARITH8(a, b, n, op) do { \
     int32_t sum; \
@@ -11189,7 +11189,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
     RESULT(sum, n, 8); \
     if (sum >= 0) \
         ge |= 1 << n; \
-    } while(0)
+    } while (0)
 
 
 #define ADD16(a, b, n) SARITH16(a, b, n, +)
@@ -11208,7 +11208,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
     RESULT(sum, n, 16); \
     if ((sum >> 16) == 1) \
         ge |= 3 << (n * 2); \
-    } while(0)
+    } while (0)
 
 #define ADD8(a, b, n) do { \
     uint32_t sum; \
@@ -11216,7 +11216,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
     RESULT(sum, n, 8); \
     if ((sum >> 8) == 1) \
         ge |= 1 << n; \
-    } while(0)
+    } while (0)
 
 #define SUB16(a, b, n) do { \
     uint32_t sum; \
@@ -11224,7 +11224,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
     RESULT(sum, n, 16); \
     if ((sum >> 16) == 0) \
         ge |= 3 << (n * 2); \
-    } while(0)
+    } while (0)
 
 #define SUB8(a, b, n) do { \
     uint32_t sum; \
@@ -11232,7 +11232,7 @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
     RESULT(sum, n, 8); \
     if ((sum >> 8) == 0) \
         ge |= 1 << n; \
-    } while(0)
+    } while (0)
 
 #define PFX u
 #define ARITH_GE
-- 
2.25.1