* [PATCH] media: ov5640: Update last busy timestamp to reset autosuspend timer
@ 2023-01-14 11:21 Andrey Skvortsov
2023-01-14 12:29 ` Sakari Ailus
0 siblings, 1 reply; 6+ messages in thread
From: Andrey Skvortsov @ 2023-01-14 11:21 UTC (permalink / raw)
To: Steve Longerbeam, Mauro Carvalho Chehab, linux-media, linux-kernel
Cc: Andrey Skvortsov
Otherwise autosuspend delay doesn't work and power is cut off
immediately as device is freed.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
---
drivers/media/i2c/ov5640.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index ac35350..f71c0f7 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1238,6 +1238,7 @@ static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val)
return ret;
}
+ pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
return 0;
}
@@ -1305,6 +1306,7 @@ static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val)
}
*val = buf[0];
+ pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
return 0;
}
@@ -3615,6 +3617,7 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
return 0;
@@ -3702,6 +3705,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
return ret;
@@ -4034,8 +4038,10 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
out:
mutex_unlock(&sensor->lock);
- if (!enable || ret)
+ if (!enable || ret) {
+ pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+ }
return ret;
}
@@ -4203,6 +4209,7 @@ static int ov5640_probe(struct i2c_client *client)
pm_runtime_set_autosuspend_delay(dev, 1000);
pm_runtime_use_autosuspend(dev);
+ pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return 0;
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] media: ov5640: Update last busy timestamp to reset autosuspend timer
2023-01-14 11:21 [PATCH] media: ov5640: Update last busy timestamp to reset autosuspend timer Andrey Skvortsov
@ 2023-01-14 12:29 ` Sakari Ailus
2023-01-14 15:19 ` Jacopo Mondi
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Sakari Ailus @ 2023-01-14 12:29 UTC (permalink / raw)
To: Andrey Skvortsov
Cc: Steve Longerbeam, Mauro Carvalho Chehab, linux-media, linux-kernel
Hi Andrey,
On Sat, Jan 14, 2023 at 02:21:09PM +0300, Andrey Skvortsov wrote:
> Otherwise autosuspend delay doesn't work and power is cut off
> immediately as device is freed.
>
> Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
> ---
> drivers/media/i2c/ov5640.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index ac35350..f71c0f7 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -1238,6 +1238,7 @@ static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val)
> return ret;
> }
>
> + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> return 0;
> }
>
> @@ -1305,6 +1306,7 @@ static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val)
> }
>
> *val = buf[0];
> + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
I wouldn't add these calls to register accesses. It's generally relevant
with autosuspend_put().
The rest seems fine to me.
> return 0;
> }
>
> @@ -3615,6 +3617,7 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> break;
> }
>
> + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
>
> return 0;
> @@ -3702,6 +3705,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
> break;
> }
>
> + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
>
> return ret;
> @@ -4034,8 +4038,10 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
> out:
> mutex_unlock(&sensor->lock);
>
> - if (!enable || ret)
> + if (!enable || ret) {
> + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> + }
>
> return ret;
> }
> @@ -4203,6 +4209,7 @@ static int ov5640_probe(struct i2c_client *client)
>
> pm_runtime_set_autosuspend_delay(dev, 1000);
> pm_runtime_use_autosuspend(dev);
> + pm_runtime_mark_last_busy(dev);
> pm_runtime_put_autosuspend(dev);
>
> return 0;
--
Kind regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] media: ov5640: Update last busy timestamp to reset autosuspend timer
2023-01-14 12:29 ` Sakari Ailus
@ 2023-01-14 15:19 ` Jacopo Mondi
2023-01-14 21:49 ` Sakari Ailus
2023-01-15 17:28 ` Andrey Skvortsov
2023-01-15 17:30 ` [PATCHv2] " Andrey Skvortsov
2 siblings, 1 reply; 6+ messages in thread
From: Jacopo Mondi @ 2023-01-14 15:19 UTC (permalink / raw)
To: Sakari Ailus
Cc: Andrey Skvortsov, Steve Longerbeam, Mauro Carvalho Chehab,
linux-media, linux-kernel
Hi Sakari
On Sat, Jan 14, 2023 at 02:29:14PM +0200, Sakari Ailus wrote:
> Hi Andrey,
>
> On Sat, Jan 14, 2023 at 02:21:09PM +0300, Andrey Skvortsov wrote:
> > Otherwise autosuspend delay doesn't work and power is cut off
> > immediately as device is freed.
> >
> > Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
> > ---
> > drivers/media/i2c/ov5640.c | 9 ++++++++-
> > 1 file changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> > index ac35350..f71c0f7 100644
> > --- a/drivers/media/i2c/ov5640.c
> > +++ b/drivers/media/i2c/ov5640.c
> > @@ -1238,6 +1238,7 @@ static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val)
> > return ret;
> > }
> >
> > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > return 0;
> > }
> >
> > @@ -1305,6 +1306,7 @@ static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val)
> > }
> >
> > *val = buf[0];
> > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
>
> I wouldn't add these calls to register accesses. It's generally relevant
> with autosuspend_put().
>
> The rest seems fine to me.
>
Does it mean the same should be done for the all the sensor drivers that
use autosuspend ? I count 8 of them, not a huge number.
> > return 0;
> > }
> >
> > @@ -3615,6 +3617,7 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> > break;
> > }
> >
> > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> >
> > return 0;
> > @@ -3702,6 +3705,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
> > break;
> > }
> >
> > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> >
> > return ret;
> > @@ -4034,8 +4038,10 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
> > out:
> > mutex_unlock(&sensor->lock);
> >
> > - if (!enable || ret)
> > + if (!enable || ret) {
> > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> > + }
> >
> > return ret;
> > }
> > @@ -4203,6 +4209,7 @@ static int ov5640_probe(struct i2c_client *client)
> >
> > pm_runtime_set_autosuspend_delay(dev, 1000);
> > pm_runtime_use_autosuspend(dev);
> > + pm_runtime_mark_last_busy(dev);
> > pm_runtime_put_autosuspend(dev);
> >
> > return 0;
>
> --
> Kind regards,
>
> Sakari Ailus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] media: ov5640: Update last busy timestamp to reset autosuspend timer
2023-01-14 15:19 ` Jacopo Mondi
@ 2023-01-14 21:49 ` Sakari Ailus
0 siblings, 0 replies; 6+ messages in thread
From: Sakari Ailus @ 2023-01-14 21:49 UTC (permalink / raw)
To: Jacopo Mondi
Cc: Andrey Skvortsov, Steve Longerbeam, Mauro Carvalho Chehab,
linux-media, linux-kernel
Hi Jacopo,
On Sat, Jan 14, 2023 at 04:19:06PM +0100, Jacopo Mondi wrote:
> Hi Sakari
>
> On Sat, Jan 14, 2023 at 02:29:14PM +0200, Sakari Ailus wrote:
> > Hi Andrey,
> >
> > On Sat, Jan 14, 2023 at 02:21:09PM +0300, Andrey Skvortsov wrote:
> > > Otherwise autosuspend delay doesn't work and power is cut off
> > > immediately as device is freed.
> > >
> > > Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
> > > ---
> > > drivers/media/i2c/ov5640.c | 9 ++++++++-
> > > 1 file changed, 8 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> > > index ac35350..f71c0f7 100644
> > > --- a/drivers/media/i2c/ov5640.c
> > > +++ b/drivers/media/i2c/ov5640.c
> > > @@ -1238,6 +1238,7 @@ static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val)
> > > return ret;
> > > }
> > >
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > > return 0;
> > > }
> > >
> > > @@ -1305,6 +1306,7 @@ static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val)
> > > }
> > >
> > > *val = buf[0];
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> >
> > I wouldn't add these calls to register accesses. It's generally relevant
> > with autosuspend_put().
> >
> > The rest seems fine to me.
> >
>
> Does it mean the same should be done for the all the sensor drivers that
> use autosuspend ? I count 8 of them, not a huge number.
pm_runtime_mark_last_busy() should be called before
pm_runtime_put_autosuspend(). I was thinking of adding a helper that would
simply call both of them. We don't have that yet though.
>
> > > return 0;
> > > }
> > >
> > > @@ -3615,6 +3617,7 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> > > break;
> > > }
> > >
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > > pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> > >
> > > return 0;
> > > @@ -3702,6 +3705,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
> > > break;
> > > }
> > >
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > > pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> > >
> > > return ret;
> > > @@ -4034,8 +4038,10 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
> > > out:
> > > mutex_unlock(&sensor->lock);
> > >
> > > - if (!enable || ret)
> > > + if (!enable || ret) {
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > > pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> > > + }
> > >
> > > return ret;
> > > }
> > > @@ -4203,6 +4209,7 @@ static int ov5640_probe(struct i2c_client *client)
> > >
> > > pm_runtime_set_autosuspend_delay(dev, 1000);
> > > pm_runtime_use_autosuspend(dev);
> > > + pm_runtime_mark_last_busy(dev);
> > > pm_runtime_put_autosuspend(dev);
> > >
> > > return 0;
--
Kind regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] media: ov5640: Update last busy timestamp to reset autosuspend timer
2023-01-14 12:29 ` Sakari Ailus
2023-01-14 15:19 ` Jacopo Mondi
@ 2023-01-15 17:28 ` Andrey Skvortsov
2023-01-15 17:30 ` [PATCHv2] " Andrey Skvortsov
2 siblings, 0 replies; 6+ messages in thread
From: Andrey Skvortsov @ 2023-01-15 17:28 UTC (permalink / raw)
To: Sakari Ailus
Cc: Steve Longerbeam, Mauro Carvalho Chehab, linux-media, linux-kernel
On 23-01-14 14:29, Sakari Ailus wrote:
> Hi Andrey,
>
> On Sat, Jan 14, 2023 at 02:21:09PM +0300, Andrey Skvortsov wrote:
> > Otherwise autosuspend delay doesn't work and power is cut off
> > immediately as device is freed.
> >
> > Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
> > ---
> > drivers/media/i2c/ov5640.c | 9 ++++++++-
> > 1 file changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> > index ac35350..f71c0f7 100644
> > --- a/drivers/media/i2c/ov5640.c
> > +++ b/drivers/media/i2c/ov5640.c
> > @@ -1238,6 +1238,7 @@ static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val)
> > return ret;
> > }
> >
> > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > return 0;
> > }
> >
> > @@ -1305,6 +1306,7 @@ static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val)
> > }
> >
> > *val = buf[0];
> > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
>
> I wouldn't add these calls to register accesses. It's generally relevant
> with autosuspend_put().
>
> The rest seems fine to me.
>
Thanks, Sakari, for the feedback. I wasn't sure about these calls either,
I'll remove them in the v2.
--
Best regards,
Andrey Skvortsov
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCHv2] media: ov5640: Update last busy timestamp to reset autosuspend timer
2023-01-14 12:29 ` Sakari Ailus
2023-01-14 15:19 ` Jacopo Mondi
2023-01-15 17:28 ` Andrey Skvortsov
@ 2023-01-15 17:30 ` Andrey Skvortsov
2 siblings, 0 replies; 6+ messages in thread
From: Andrey Skvortsov @ 2023-01-15 17:30 UTC (permalink / raw)
To: Steve Longerbeam, Jacopo Mondi, Mauro Carvalho Chehab,
linux-media, linux-kernel
Cc: Andrey Skvortsov
Otherwise autosuspend delay doesn't work and power is cut off
immediately as device is freed.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
---
Changes since PATCHv1:
* Removed pm_runtime_mask_last_busy call from ov5640_write_reg and ov5640_read_reg
as suggested by Sakari Ailus
* Updated diff against next-20230113
drivers/media/i2c/ov5640.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index e0f908af581b..24f4f395aad6 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -3316,6 +3316,7 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
return 0;
@@ -3391,6 +3392,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
return ret;
@@ -3710,8 +3712,10 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
out:
mutex_unlock(&sensor->lock);
- if (!enable || ret)
+ if (!enable || ret) {
+ pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+ }
return ret;
}
@@ -3912,6 +3916,7 @@ static int ov5640_probe(struct i2c_client *client)
pm_runtime_set_autosuspend_delay(dev, 1000);
pm_runtime_use_autosuspend(dev);
+ pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return 0;
--
2.39.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-01-15 17:30 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-14 11:21 [PATCH] media: ov5640: Update last busy timestamp to reset autosuspend timer Andrey Skvortsov
2023-01-14 12:29 ` Sakari Ailus
2023-01-14 15:19 ` Jacopo Mondi
2023-01-14 21:49 ` Sakari Ailus
2023-01-15 17:28 ` Andrey Skvortsov
2023-01-15 17:30 ` [PATCHv2] " Andrey Skvortsov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.