* [meta-multimedia][PATCH] pipewire: update 0.3.63 -> 0.3.64
@ 2023-01-17 7:49 Markus Volk
2023-04-18 19:13 ` [oe] " Peter Kjellerstedt
0 siblings, 1 reply; 2+ messages in thread
From: Markus Volk @ 2023-01-17 7:49 UTC (permalink / raw)
To: openembedded-devel; +Cc: Markus Volk
This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
- Clear old buffer memory on ports to fix some SIGBUS errors.
- It is now possible to assign custom port names to the ports from an
adapter. This feature is helpful to those who use a multichannel
interface with long-term connections. This way they can label each
port with its designation, such as an instrument name or anything else
to be displayed in a patchbay or DAW.
- Fix some issues with node suspend and quantum and rate calculations.
- Fix some regressions in pulse-tunnel and RTP-source adaptive resampling
that could cause synchronization problems.
- UCM devices now also have a Pro Audio profile.
- NODE_TARGET (with the object.id) is now deprecated, use TARGET_OBJECT
(with the object.serial, which is not reused and can avoid races).
- Clear all peer input port buffers when suspending. This fixes some
SIGBUS errors when some plugins were using old memory. (#2914)
- Fix a case where nodes that were not supposed to be suspended, were
kept suspended on a rate change. (#2929)
- Fix an error in the quantum and rate calculations that could cause
nodes to run with wrong quantum and rates when multiple rates were
allowed. (#2925)
- pw-dump will now sort dictionaries to make it easier to compare
different outputs.
- Improve output of pw-reserve.
- pw-loopback uses TARGET_OBJECT so you will need to use the serial
id (or better the name) as the target instead of the object id.
- The filter-chain modules has seen some cleanups, refactoring and
optimizations in the various DSP functions.
- The ROC module now supports setting a custom samplerate.
- ROC 0.2.X is now required.
- The pulse tunnel and RTP source were not updating the rate field
correctly which could cause synchronization problems. (#2891)
- The filter-chain now supports an arbitrary number of control
properties. (#2933)
- It is now possible to assign custom port names to the ports from an
adapter with the PW_KEY_NODE_CHANNELNAMES.
- Support was added for capture and playback props in echo-cancel.
(#2939)
- The ACP code now has an option to set the probe samplerate. (#1599)
- UCM devices now also have a Pro Audio profile.
- Filtering of Step ranges is now implemented.
- The channel-map is now set correctly on the echo-cancel module.
- source_master and sink_master are now correctly handled in module
echo-cancel.
- Fix a regression in DRAIN where resuming after a DRAIN would fail.
This caused problems for espeak. (#2928)
- TARGET_OBJECT is now used to make it possible to use the indexes
as a target.
- ladspa-source and remap-source can now also link to monitors.
- The ALSA plugin now handles the target.object correctly when set to
-1. (#2893)
- The v4l2 replacement library now also follows symlinks.
- Support for getting and setting controls was added.
- Support for G_PARM was added.
- The environment variable PIPEWIRE_V4L2_TARGET can be used to force
an application onto a specific camera.
- Fix compilation without ldac_abr.
- Fix a missing brace in CIND reply. This could cause some devices to
fail.
- Fix configuration of the initial latency.
- The device provider now supports setting an fd so that it can connect
to PipeWire sessions from the portal.
- DMABuf support was re-enabled in gstpipewiresrc.
Build with support for gsettings and libcamera
Signed-off-by: Markus Volk <f_l_k@t-online.de>
---
.../pipewire/{pipewire_0.3.63.bb => pipewire_0.3.64.bb} | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
rename meta-multimedia/recipes-multimedia/pipewire/{pipewire_0.3.63.bb => pipewire_0.3.64.bb} (98%)
diff --git a/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.63.bb b/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.64.bb
similarity index 98%
rename from meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.63.bb
rename to meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.64.bb
index f7acb8db4..91945ca7d 100644
--- a/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.63.bb
+++ b/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.64.bb
@@ -13,12 +13,12 @@ LIC_FILES_CHKSUM = " \
DEPENDS = "dbus ncurses"
-SRCREV = "5ff00f40b9d3ecfc38305edc27e9c2b01629802c"
+SRCREV = "bba452695eb673461c5cf626eec57728991eadf7"
SRC_URI = "git://gitlab.freedesktop.org/pipewire/pipewire.git;branch=master;protocol=https"
S = "${WORKDIR}/git"
-inherit meson pkgconfig systemd gettext useradd
+inherit gsettings meson pkgconfig systemd gettext useradd
USERADD_PACKAGES = "${PN}"
@@ -88,7 +88,7 @@ PACKAGECONFIG:class-target ??= " \
${@bb.utils.contains('DISTRO_FEATURES', 'pulseaudio gtk', 'gsettings', '', d)} \
${@bb.utils.filter('DISTRO_FEATURES', 'alsa vulkan pulseaudio', d)} \
${PIPEWIRE_SESSION_MANAGER} \
- ${FFMPEG_AVAILABLE} avahi flatpak gstreamer jack libusb pw-cat raop sndfile v4l2 udev volume webrtc-echo-cancelling \
+ ${FFMPEG_AVAILABLE} avahi flatpak gstreamer gsettings jack libusb pw-cat raop sndfile v4l2 udev volume webrtc-echo-cancelling libcamera \
"
# "jack" and "pipewire-jack" packageconfigs cannot be both enabled,
--
2.34.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* RE: [oe] [meta-multimedia][PATCH] pipewire: update 0.3.63 -> 0.3.64
2023-01-17 7:49 [meta-multimedia][PATCH] pipewire: update 0.3.63 -> 0.3.64 Markus Volk
@ 2023-04-18 19:13 ` Peter Kjellerstedt
0 siblings, 0 replies; 2+ messages in thread
From: Peter Kjellerstedt @ 2023-04-18 19:13 UTC (permalink / raw)
To: Markus Volk; +Cc: openembedded-devel
> -----Original Message-----
> From: openembedded-devel@lists.openembedded.org <openembedded-devel@lists.openembedded.org> On Behalf Of Markus Volk
> Sent: den 17 januari 2023 08:50
> To: openembedded-devel@lists.openembedded.org
> Cc: Markus Volk <f_l_k@t-online.de>
> Subject: [oe] [meta-multimedia][PATCH] pipewire: update 0.3.63 -> 0.3.64
>
> This is a bugfix release that is API and ABI compatible with previous
> 0.3.x releases.
>
> - Clear old buffer memory on ports to fix some SIGBUS errors.
> - It is now possible to assign custom port names to the ports from an
> adapter. This feature is helpful to those who use a multichannel
> interface with long-term connections. This way they can label each
> port with its designation, such as an instrument name or anything else
> to be displayed in a patchbay or DAW.
> - Fix some issues with node suspend and quantum and rate calculations.
> - Fix some regressions in pulse-tunnel and RTP-source adaptive resampling
> that could cause synchronization problems.
> - UCM devices now also have a Pro Audio profile.
> - NODE_TARGET (with the object.id) is now deprecated, use TARGET_OBJECT
> (with the object.serial, which is not reused and can avoid races).
>
> - Clear all peer input port buffers when suspending. This fixes some
> SIGBUS errors when some plugins were using old memory. (#2914)
> - Fix a case where nodes that were not supposed to be suspended, were
> kept suspended on a rate change. (#2929)
> - Fix an error in the quantum and rate calculations that could cause
> nodes to run with wrong quantum and rates when multiple rates were
> allowed. (#2925)
>
> - pw-dump will now sort dictionaries to make it easier to compare
> different outputs.
> - Improve output of pw-reserve.
> - pw-loopback uses TARGET_OBJECT so you will need to use the serial
> id (or better the name) as the target instead of the object id.
>
> - The filter-chain modules has seen some cleanups, refactoring and
> optimizations in the various DSP functions.
> - The ROC module now supports setting a custom samplerate.
> - ROC 0.2.X is now required.
> - The pulse tunnel and RTP source were not updating the rate field
> correctly which could cause synchronization problems. (#2891)
> - The filter-chain now supports an arbitrary number of control
> properties. (#2933)
> - It is now possible to assign custom port names to the ports from an
> adapter with the PW_KEY_NODE_CHANNELNAMES.
> - Support was added for capture and playback props in echo-cancel.
> (#2939)
>
> - The ACP code now has an option to set the probe samplerate. (#1599)
> - UCM devices now also have a Pro Audio profile.
> - Filtering of Step ranges is now implemented.
>
> - The channel-map is now set correctly on the echo-cancel module.
> - source_master and sink_master are now correctly handled in module
> echo-cancel.
> - Fix a regression in DRAIN where resuming after a DRAIN would fail.
> This caused problems for espeak. (#2928)
> - TARGET_OBJECT is now used to make it possible to use the indexes
> as a target.
> - ladspa-source and remap-source can now also link to monitors.
>
> - The ALSA plugin now handles the target.object correctly when set to
> -1. (#2893)
>
> - The v4l2 replacement library now also follows symlinks.
> - Support for getting and setting controls was added.
> - Support for G_PARM was added.
> - The environment variable PIPEWIRE_V4L2_TARGET can be used to force
> an application onto a specific camera.
>
> - Fix compilation without ldac_abr.
> - Fix a missing brace in CIND reply. This could cause some devices to
> fail.
> - Fix configuration of the initial latency.
>
> - The device provider now supports setting an fd so that it can connect
> to PipeWire sessions from the portal.
> - DMABuf support was re-enabled in gstpipewiresrc.
>
> Build with support for gsettings and libcamera
>
> Signed-off-by: Markus Volk <f_l_k@t-online.de>
> ---
> .../pipewire/{pipewire_0.3.63.bb => pipewire_0.3.64.bb} | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
> rename meta-multimedia/recipes-multimedia/pipewire/{pipewire_0.3.63.bb => pipewire_0.3.64.bb} (98%)
>
> diff --git a/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.63.bb b/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.64.bb
> similarity index 98%
> rename from meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.63.bb
> rename to meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.64.bb
> index f7acb8db4..91945ca7d 100644
> --- a/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.63.bb
> +++ b/meta-multimedia/recipes-multimedia/pipewire/pipewire_0.3.64.bb
> @@ -13,12 +13,12 @@ LIC_FILES_CHKSUM = " \
>
> DEPENDS = "dbus ncurses"
>
> -SRCREV = "5ff00f40b9d3ecfc38305edc27e9c2b01629802c"
> +SRCREV = "bba452695eb673461c5cf626eec57728991eadf7"
> SRC_URI = "git://gitlab.freedesktop.org/pipewire/pipewire.git;branch=master;protocol=https"
>
> S = "${WORKDIR}/git"
>
> -inherit meson pkgconfig systemd gettext useradd
> +inherit gsettings meson pkgconfig systemd gettext useradd
Why do you add inherit of gsettings? AFAICT, it is used to run
`glib-compile-schemas $D${datadir}/glib-2.0/schemas` when installing/
removing the package. However, pipewire does not install anything in
/usr/share/glib-2.0/schemas that I can see. And this now fails (with
master of poky and meta-oe) if I add IMAGE_INSTALL:append = " pipewire"
to my local.conf and build core-image-minimal:
ERROR: core-image-minimal-1.0-r0 do_rootfs: Postinstall scriptlets of
['pipewire'] have failed. If the intention is to defer them to first
boot, then please place them into pkg_postinst_ontarget:${PN} ().
Deferring to first boot via 'exit 1' is no longer supported.
The actual error from log.do_rootfs:
+ glib-compile-schemas .../tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/usr/share/glib-2.0/schemas
Error opening directory ".../tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/usr/share/glib-2.0/schemas": No such file or directory
>
> USERADD_PACKAGES = "${PN}"
>
> @@ -88,7 +88,7 @@ PACKAGECONFIG:class-target ??= " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'pulseaudio gtk', 'gsettings', '', d)} \
> ${@bb.utils.filter('DISTRO_FEATURES', 'alsa vulkan pulseaudio', d)} \
> ${PIPEWIRE_SESSION_MANAGER} \
> - ${FFMPEG_AVAILABLE} avahi flatpak gstreamer jack libusb pw-cat raop sndfile v4l2 udev volume webrtc-echo-cancelling \
> + ${FFMPEG_AVAILABLE} avahi flatpak gstreamer gsettings jack libusb pw-cat raop sndfile v4l2 udev volume webrtc-echo-cancelling libcamera \
Why do you add an unconditional dependency on gsettings here when
there is a conditional dependency a couple of lines above?
Alternatively, why is the conditional dependency left?
> "
>
> # "jack" and "pipewire-jack" packageconfigs cannot be both enabled,
> --
> 2.34.1
//Peter
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-04-18 19:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-17 7:49 [meta-multimedia][PATCH] pipewire: update 0.3.63 -> 0.3.64 Markus Volk
2023-04-18 19:13 ` [oe] " Peter Kjellerstedt
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.