[PATCH v2 0/7] phy: qualcomm: Add PCIe support for SM8550

[PATCH v2 0/7] phy: qualcomm: Add PCIe support for SM8550

[Abel Vesa]

This patchset relies on the following patchset:
https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/

The v1 of this patchset is:
https://lore.kernel.org/all/20221116120157.2706810-1-abel.vesa@linaro.org/

Changes since v1:
 * dropped all PCIe unrelated patches and also register offsets
 * split all the offsets into separate patches, like Vinod suggested
 * dropped the legacy dt parse changes since we intend to support
   only the new dt parse mechanism from now on

Abel Vesa (7):
  phy: qcom-qmp: pcs: Add v6 register offsets
  phy: qcom-qmp: pcs: Add v6.20 register offsets
  phy: qcom-qmp: pcs-pcie: Add v6 register offsets
  phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
  phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
  phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
  phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs

 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 371 ++++++++++++++++++
 .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h   |  15 +
 .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h    |  23 ++
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h    |  16 +
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h |  18 +
 .../phy-qcom-qmp-qserdes-ln-shrd-v6.h         |  32 ++
 .../phy-qcom-qmp-qserdes-txrx-v6_20.h         |  45 +++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |   6 +
 8 files changed, 526 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h

-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 0/7] phy: qualcomm: Add PCIe support for SM8550

[Abel Vesa]

This patchset relies on the following patchset:
https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/

The v1 of this patchset is:
https://lore.kernel.org/all/20221116120157.2706810-1-abel.vesa@linaro.org/

Changes since v1:
 * dropped all PCIe unrelated patches and also register offsets
 * split all the offsets into separate patches, like Vinod suggested
 * dropped the legacy dt parse changes since we intend to support
   only the new dt parse mechanism from now on

Abel Vesa (7):
  phy: qcom-qmp: pcs: Add v6 register offsets
  phy: qcom-qmp: pcs: Add v6.20 register offsets
  phy: qcom-qmp: pcs-pcie: Add v6 register offsets
  phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
  phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
  phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
  phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs

 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 371 ++++++++++++++++++
 .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h   |  15 +
 .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h    |  23 ++
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h    |  16 +
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h |  18 +
 .../phy-qcom-qmp-qserdes-ln-shrd-v6.h         |  32 ++
 .../phy-qcom-qmp-qserdes-txrx-v6_20.h         |  45 +++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |   6 +
 8 files changed, 526 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h

-- 
2.34.1

[PATCH v2 1/7] phy: qcom-qmp: pcs: Add v6 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS offsets in a dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h | 16 ++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h        |  2 ++
 2 files changed, 18 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
new file mode 100644
index 000000000000..18c4a3abe590
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V6_H_
+#define QCOM_PHY_QMP_PCS_V6_H_
+
+/* Only for QMP V6 PHY - USB/PCIe PCS registers */
+#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1		0xdc
+#define QPHY_V6_PCS_RX_SIGDET_LVL		0x188
+#define QPHY_V6_PCS_RATE_SLEW_CNTRL1		0x198
+#define QPHY_V6_PCS_EQ_CONFIG2			0x1e0
+#define QPHY_V6_PCS_PCS_TX_RX_CONFIG		0x1d0
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index a63a691b8372..80e3b5c860b6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -38,6 +38,8 @@
 
 #include "phy-qcom-qmp-pcs-v5_20.h"
 
+#include "phy-qcom-qmp-pcs-v6.h"
+
 /* Only for QMP V3 & V4 PHY - DP COM registers */
 #define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
 #define QPHY_V3_DP_COM_SW_RESET				0x04
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 1/7] phy: qcom-qmp: pcs: Add v6 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS offsets in a dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h | 16 ++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h        |  2 ++
 2 files changed, 18 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
new file mode 100644
index 000000000000..18c4a3abe590
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V6_H_
+#define QCOM_PHY_QMP_PCS_V6_H_
+
+/* Only for QMP V6 PHY - USB/PCIe PCS registers */
+#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1		0xdc
+#define QPHY_V6_PCS_RX_SIGDET_LVL		0x188
+#define QPHY_V6_PCS_RATE_SLEW_CNTRL1		0x198
+#define QPHY_V6_PCS_EQ_CONFIG2			0x1e0
+#define QPHY_V6_PCS_PCS_TX_RX_CONFIG		0x1d0
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index a63a691b8372..80e3b5c860b6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -38,6 +38,8 @@
 
 #include "phy-qcom-qmp-pcs-v5_20.h"
 
+#include "phy-qcom-qmp-pcs-v6.h"
+
 /* Only for QMP V3 & V4 PHY - DP COM registers */
 #define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
 #define QPHY_V3_DP_COM_SW_RESET				0x04
-- 
2.34.1

[PATCH v2 2/7] phy: qcom-qmp: pcs: Add v6.20 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS offsets in a dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h | 18 ++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |  2 ++
 2 files changed, 20 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
new file mode 100644
index 000000000000..9c3f1e4950e6
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V6_20_H_
+#define QCOM_PHY_QMP_PCS_V6_20_H_
+
+/* Only for QMP V6_20 PHY - USB/PCIe PCS registers */
+#define QPHY_V6_20_PCS_G3S2_PRE_GAIN			0x178
+#define QPHY_V6_20_PCS_RX_SIGDET_LVL			0x190
+#define QPHY_V6_20_PCS_COM_ELECIDLE_DLY_SEL		0x1b8
+#define QPHY_V6_20_PCS_TX_RX_CONFIG1			0x1dc
+#define QPHY_V6_20_PCS_TX_RX_CONFIG2			0x1e0
+#define QPHY_V6_20_PCS_EQ_CONFIG4			0x1f8
+#define QPHY_V6_20_PCS_EQ_CONFIG5			0x1fc
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 80e3b5c860b6..760de4c76e5b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -40,6 +40,8 @@
 
 #include "phy-qcom-qmp-pcs-v6.h"
 
+#include "phy-qcom-qmp-pcs-v6_20.h"
+
 /* Only for QMP V3 & V4 PHY - DP COM registers */
 #define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
 #define QPHY_V3_DP_COM_SW_RESET				0x04
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 2/7] phy: qcom-qmp: pcs: Add v6.20 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS offsets in a dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h | 18 ++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |  2 ++
 2 files changed, 20 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
new file mode 100644
index 000000000000..9c3f1e4950e6
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V6_20_H_
+#define QCOM_PHY_QMP_PCS_V6_20_H_
+
+/* Only for QMP V6_20 PHY - USB/PCIe PCS registers */
+#define QPHY_V6_20_PCS_G3S2_PRE_GAIN			0x178
+#define QPHY_V6_20_PCS_RX_SIGDET_LVL			0x190
+#define QPHY_V6_20_PCS_COM_ELECIDLE_DLY_SEL		0x1b8
+#define QPHY_V6_20_PCS_TX_RX_CONFIG1			0x1dc
+#define QPHY_V6_20_PCS_TX_RX_CONFIG2			0x1e0
+#define QPHY_V6_20_PCS_EQ_CONFIG4			0x1f8
+#define QPHY_V6_20_PCS_EQ_CONFIG5			0x1fc
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 80e3b5c860b6..760de4c76e5b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -40,6 +40,8 @@
 
 #include "phy-qcom-qmp-pcs-v6.h"
 
+#include "phy-qcom-qmp-pcs-v6_20.h"
+
 /* Only for QMP V3 & V4 PHY - DP COM registers */
 #define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
 #define QPHY_V3_DP_COM_SW_RESET				0x04
-- 
2.34.1

[PATCH v2 3/7] phy: qcom-qmp: pcs-pcie: Add v6 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c        |  1 +
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h | 15 +++++++++++++++
 2 files changed, 16 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 21727e90fad1..d4ca38f31e3f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -29,6 +29,7 @@
 #include "phy-qcom-qmp-pcs-pcie-v4_20.h"
 #include "phy-qcom-qmp-pcs-pcie-v5.h"
 #include "phy-qcom-qmp-pcs-pcie-v5_20.h"
+#include "phy-qcom-qmp-pcs-pcie-v6.h"
 #include "phy-qcom-qmp-pcie-qhp.h"
 
 /* QPHY_SW_RESET bit */
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
new file mode 100644
index 000000000000..91e70002eb47
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_H_
+#define QCOM_PHY_QMP_PCS_PCIE_V6_H_
+
+/* Only for QMP V6 PHY - PCIE have different offsets than V5 */
+#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG2	0x0c
+#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG4	0x14
+#define QPHY_PCIE_V6_PCS_PCIE_ENDPOINT_REFCLK_DRIVE	0x20
+#define QPHY_PCIE_V6_PCS_PCIE_OSC_DTCT_ACTIONS		0x94
+
+#endif
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 3/7] phy: qcom-qmp: pcs-pcie: Add v6 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c        |  1 +
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h | 15 +++++++++++++++
 2 files changed, 16 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 21727e90fad1..d4ca38f31e3f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -29,6 +29,7 @@
 #include "phy-qcom-qmp-pcs-pcie-v4_20.h"
 #include "phy-qcom-qmp-pcs-pcie-v5.h"
 #include "phy-qcom-qmp-pcs-pcie-v5_20.h"
+#include "phy-qcom-qmp-pcs-pcie-v6.h"
 #include "phy-qcom-qmp-pcie-qhp.h"
 
 /* QPHY_SW_RESET bit */
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
new file mode 100644
index 000000000000..91e70002eb47
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_H_
+#define QCOM_PHY_QMP_PCS_PCIE_V6_H_
+
+/* Only for QMP V6 PHY - PCIE have different offsets than V5 */
+#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG2	0x0c
+#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG4	0x14
+#define QPHY_PCIE_V6_PCS_PCIE_ENDPOINT_REFCLK_DRIVE	0x20
+#define QPHY_PCIE_V6_PCS_PCIE_OSC_DTCT_ACTIONS		0x94
+
+#endif
-- 
2.34.1

[PATCH v2 4/7] phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      |  1 +
 .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h    | 23 +++++++++++++++++++
 2 files changed, 24 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index d4ca38f31e3f..bffb9e138715 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -30,6 +30,7 @@
 #include "phy-qcom-qmp-pcs-pcie-v5.h"
 #include "phy-qcom-qmp-pcs-pcie-v5_20.h"
 #include "phy-qcom-qmp-pcs-pcie-v6.h"
+#include "phy-qcom-qmp-pcs-pcie-v6_20.h"
 #include "phy-qcom-qmp-pcie-qhp.h"
 
 /* QPHY_SW_RESET bit */
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
new file mode 100644
index 000000000000..e3eb08776339
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_20_H_
+#define QCOM_PHY_QMP_PCS_PCIE_V6_20_H_
+
+/* Only for QMP V6_20 PHY - PCIE have different offsets than V5 */
+#define QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2		0x00c
+#define QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG		0x018
+#define QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE	0x01c
+#define QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS		0x090
+#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG1			0x0a0
+#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG5			0x108
+#define QPHY_PCIE_V6_20_PCS_G4_PRE_GAIN			0x15c
+#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG1	0x17c
+#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG3	0x184
+#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG5	0x18c
+#define QPHY_PCIE_V6_20_PCS_G3_FOM_EQ_CONFIG5		0x1ac
+#define QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5		0x1c0
+
+#endif
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 4/7] phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      |  1 +
 .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h    | 23 +++++++++++++++++++
 2 files changed, 24 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index d4ca38f31e3f..bffb9e138715 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -30,6 +30,7 @@
 #include "phy-qcom-qmp-pcs-pcie-v5.h"
 #include "phy-qcom-qmp-pcs-pcie-v5_20.h"
 #include "phy-qcom-qmp-pcs-pcie-v6.h"
+#include "phy-qcom-qmp-pcs-pcie-v6_20.h"
 #include "phy-qcom-qmp-pcie-qhp.h"
 
 /* QPHY_SW_RESET bit */
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
new file mode 100644
index 000000000000..e3eb08776339
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_20_H_
+#define QCOM_PHY_QMP_PCS_PCIE_V6_20_H_
+
+/* Only for QMP V6_20 PHY - PCIE have different offsets than V5 */
+#define QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2		0x00c
+#define QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG		0x018
+#define QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE	0x01c
+#define QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS		0x090
+#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG1			0x0a0
+#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG5			0x108
+#define QPHY_PCIE_V6_20_PCS_G4_PRE_GAIN			0x15c
+#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG1	0x17c
+#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG3	0x184
+#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG5	0x18c
+#define QPHY_PCIE_V6_20_PCS_G3_FOM_EQ_CONFIG5		0x1ac
+#define QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5		0x1c0
+
+#endif
-- 
2.34.1

[PATCH v2 5/7] phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../phy-qcom-qmp-qserdes-txrx-v6_20.h         | 45 +++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |  1 +
 2 files changed, 46 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
new file mode 100644
index 000000000000..5385a8b60970
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX		0x30
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX		0x34
+#define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN			0xac
+#define QSERDES_V6_20_TX_LANE_MODE_1				0x78
+#define QSERDES_V6_20_TX_LANE_MODE_2				0x7c
+#define QSERDES_V6_20_TX_LANE_MODE_3				0x80
+
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2			0x08
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3			0x0c
+#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS			0x20
+#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3		0x34
+#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2				0x9c
+#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET			0xa0
+#define QSERDES_V6_20_RX_DFE_3					0xb4
+#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL			0xe8
+#define QSERDES_V6_20_RX_GM_CAL					0x10c
+#define QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4			0x120
+#define QSERDES_V6_20_RX_SIGDET_ENABLES				0x148
+#define QSERDES_V6_20_RX_PHPRE_CTRL				0x188
+#define QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET		0x194
+#define QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32		0x1dc
+#define QSERDES_V6_20_RX_MODE_RATE2_B0				0x1f4
+#define QSERDES_V6_20_RX_MODE_RATE2_B1				0x1f8
+#define QSERDES_V6_20_RX_MODE_RATE2_B2				0x1fc
+#define QSERDES_V6_20_RX_MODE_RATE2_B3				0x200
+#define QSERDES_V6_20_RX_MODE_RATE2_B4				0x204
+#define QSERDES_V6_20_RX_MODE_RATE2_B5				0x208
+#define QSERDES_V6_20_RX_MODE_RATE2_B6				0x20c
+#define QSERDES_V6_20_RX_MODE_RATE3_B0				0x210
+#define QSERDES_V6_20_RX_MODE_RATE3_B1				0x214
+#define QSERDES_V6_20_RX_MODE_RATE3_B2				0x218
+#define QSERDES_V6_20_RX_MODE_RATE3_B3				0x21c
+#define QSERDES_V6_20_RX_MODE_RATE3_B4				0x220
+#define QSERDES_V6_20_RX_MODE_RATE3_B5				0x224
+#define QSERDES_V6_20_RX_MODE_RATE3_B6				0x228
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 760de4c76e5b..e5974e6caf51 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -23,6 +23,7 @@
 
 #include "phy-qcom-qmp-qserdes-com-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
 
 #include "phy-qcom-qmp-qserdes-pll.h"
 
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 5/7] phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../phy-qcom-qmp-qserdes-txrx-v6_20.h         | 45 +++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |  1 +
 2 files changed, 46 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
new file mode 100644
index 000000000000..5385a8b60970
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX		0x30
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX		0x34
+#define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN			0xac
+#define QSERDES_V6_20_TX_LANE_MODE_1				0x78
+#define QSERDES_V6_20_TX_LANE_MODE_2				0x7c
+#define QSERDES_V6_20_TX_LANE_MODE_3				0x80
+
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2			0x08
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3			0x0c
+#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS			0x20
+#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3		0x34
+#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2				0x9c
+#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET			0xa0
+#define QSERDES_V6_20_RX_DFE_3					0xb4
+#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL			0xe8
+#define QSERDES_V6_20_RX_GM_CAL					0x10c
+#define QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4			0x120
+#define QSERDES_V6_20_RX_SIGDET_ENABLES				0x148
+#define QSERDES_V6_20_RX_PHPRE_CTRL				0x188
+#define QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET		0x194
+#define QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32		0x1dc
+#define QSERDES_V6_20_RX_MODE_RATE2_B0				0x1f4
+#define QSERDES_V6_20_RX_MODE_RATE2_B1				0x1f8
+#define QSERDES_V6_20_RX_MODE_RATE2_B2				0x1fc
+#define QSERDES_V6_20_RX_MODE_RATE2_B3				0x200
+#define QSERDES_V6_20_RX_MODE_RATE2_B4				0x204
+#define QSERDES_V6_20_RX_MODE_RATE2_B5				0x208
+#define QSERDES_V6_20_RX_MODE_RATE2_B6				0x20c
+#define QSERDES_V6_20_RX_MODE_RATE3_B0				0x210
+#define QSERDES_V6_20_RX_MODE_RATE3_B1				0x214
+#define QSERDES_V6_20_RX_MODE_RATE3_B2				0x218
+#define QSERDES_V6_20_RX_MODE_RATE3_B3				0x21c
+#define QSERDES_V6_20_RX_MODE_RATE3_B4				0x220
+#define QSERDES_V6_20_RX_MODE_RATE3_B5				0x224
+#define QSERDES_V6_20_RX_MODE_RATE3_B6				0x228
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 760de4c76e5b..e5974e6caf51 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -23,6 +23,7 @@
 
 #include "phy-qcom-qmp-qserdes-com-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
 
 #include "phy-qcom-qmp-qserdes-pll.h"
 
-- 
2.34.1

[PATCH v2 6/7] phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../phy-qcom-qmp-qserdes-ln-shrd-v6.h         | 32 +++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |  1 +
 2 files changed, 33 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
new file mode 100644
index 000000000000..86d7d796d5d7
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+
+#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL			0xa0
+#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES			0xb0
+#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1			0xb4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1		0xc4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2		0xc8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0			0xd4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1			0xd8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2			0xdc
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3			0xe0
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4			0xe4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5			0xe8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6			0xec
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210	0xf0
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3		0xf4
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210	0xf8
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3		0xfc
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210	0x100
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3		0x104
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3		0x10c
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3		0x114
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3		0x11c
+#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE		0x128
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index e5974e6caf51..148663ee713a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -24,6 +24,7 @@
 #include "phy-qcom-qmp-qserdes-com-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
+#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
 
 #include "phy-qcom-qmp-qserdes-pll.h"
 
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 6/7] phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../phy-qcom-qmp-qserdes-ln-shrd-v6.h         | 32 +++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |  1 +
 2 files changed, 33 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
new file mode 100644
index 000000000000..86d7d796d5d7
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+
+#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL			0xa0
+#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES			0xb0
+#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1			0xb4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1		0xc4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2		0xc8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0			0xd4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1			0xd8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2			0xdc
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3			0xe0
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4			0xe4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5			0xe8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6			0xec
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210	0xf0
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3		0xf4
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210	0xf8
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3		0xfc
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210	0x100
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3		0x104
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3		0x10c
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3		0x114
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3		0x11c
+#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE		0x128
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index e5974e6caf51..148663ee713a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -24,6 +24,7 @@
 #include "phy-qcom-qmp-qserdes-com-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
+#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
 
 #include "phy-qcom-qmp-qserdes-pll.h"
 
-- 
2.34.1

[PATCH v2 7/7] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs

[Abel Vesa]

Add the SM8550 both g4 and g3 configurations. In addition, there is a
new "lane shared" table that needs to be configured for g4, along with
the No-CSR list of resets.

Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 369 +++++++++++++++++++++++
 1 file changed, 369 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index bffb9e138715..6f82604bd430 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1506,6 +1506,234 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl[] =
 	QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x08),
 };
 
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xf8),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x93),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_ENABLE1, 0x90),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYS_CLK_CTRL, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x42),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_SELECT, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC_3, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0xa0),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x15),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_4, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_PI_QEC_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x18),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_GM_CAL, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_LOW, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH, 0x5c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH2, 0x9c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH3, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH4, 0x89),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_LOW, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH, 0x94),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH2, 0x5b),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH3, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH4, 0x89),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_TX_ADAPT_POST_THRESH, 0xf0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FO_GAIN, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_GAIN, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIDGET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_TRIM, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_REFGEN_REQ_CONFIG1, 0x05),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RX_SIGDET_LVL, 0x77),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RATE_SLEW_CNTRL1, 0x0b),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG2, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_PCS_TX_RX_CONFIG, 0x8c),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG2, 0x1d),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x26),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x68),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xf8),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_POST_DIV_MUX, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_ENABLE1, 0x90),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYS_CLK_CTRL, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x46),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_SELECT, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_MISC_1, 0x88),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_MODE, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_VCO_DC_LEVEL_CTRL, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_serdes_ln_shrd_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_Q_EN_RATES, 0xe),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3, 0x9a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5, 0xb6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6, 0x64),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_LANE_MODE_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_LANE_MODE_2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_LANE_MODE_3, 0x51),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN, 0x34),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_PI_CONTROLS, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_IVCM_CAL_CTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET, 0x7c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_3, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_VGA_CAL_MAN_VAL, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_GM_CAL, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_PHPRE_CTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B0, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B1, 0xb3),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B2, 0x58),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B3, 0x9a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B4, 0x26),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B5, 0xb6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B6, 0xee),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B0, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B1, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B2, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B3, 0xdf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B4, 0x78),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B5, 0x76),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B6, 0xff),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_G3S2_PRE_GAIN, 0x2e),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_COM_ELECIDLE_DLY_SEL, 0x25),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_EQ_CONFIG4, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_EQ_CONFIG5, 0x22),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_TX_RX_CONFIG1, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_TX_RX_CONFIG2, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE, 0xc1),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_EQ_CONFIG1, 0x16),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_EQ_CONFIG5, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G4_PRE_GAIN, 0x2e),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG1, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG3, 0x28),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG, 0xc0),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2, 0x1d),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG5, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G3_FOM_EQ_CONFIG5, 0xf2),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5, 0xf2),
+};
+
 struct qmp_pcie_offsets {
 	u16 serdes;
 	u16 pcs;
@@ -1514,11 +1742,14 @@ struct qmp_pcie_offsets {
 	u16 rx;
 	u16 tx2;
 	u16 rx2;
+	u16 ln_shrd;
 };
 
 struct qmp_phy_cfg_tbls {
 	const struct qmp_phy_init_tbl *serdes;
 	int serdes_num;
+	const struct qmp_phy_init_tbl *ln_shrd_serdes;
+	int ln_shrd_serdes_num;
 	const struct qmp_phy_init_tbl *tx;
 	int tx_num;
 	const struct qmp_phy_init_tbl *rx;
@@ -1556,6 +1787,9 @@ struct qmp_phy_cfg {
 	/* resets to be requested */
 	const char * const *reset_list;
 	int num_resets;
+	/* no CSR resets to be requested */
+	const char * const *nocsr_reset_list;
+	int num_nocsr_resets;
 	/* regulators to be requested */
 	const char * const *vreg_list;
 	int num_vregs;
@@ -1569,6 +1803,9 @@ struct qmp_phy_cfg {
 
 	bool skip_start_delay;
 
+	/* true, if PHY has lane shared serdes table */
+	bool has_ln_shrd_serdes_tbl;
+
 	/* QMP PHY pipe clock interface rate */
 	unsigned long pipe_clock_rate;
 };
@@ -1580,6 +1817,7 @@ struct qmp_pcie {
 	bool tcsr_4ln_config;
 
 	void __iomem *serdes;
+	void __iomem *ln_shrd_serdes;
 	void __iomem *pcs;
 	void __iomem *pcs_misc;
 	void __iomem *tx;
@@ -1594,6 +1832,7 @@ struct qmp_pcie {
 	int num_pipe_clks;
 
 	struct reset_control_bulk_data *resets;
+	struct reset_control_bulk_data *nocsr_resets;
 	struct regulator_bulk_data *vregs;
 
 	struct phy *phy;
@@ -1643,11 +1882,19 @@ static const char * const sdm845_pciephy_clk_l[] = {
 	"aux", "cfg_ahb", "ref", "refgen",
 };
 
+static const char * const sm8550_pciephy_clk_l[] = {
+	"aux", "aux_phy", "cfg_ahb", "ref", "rchng",
+};
+
 /* list of regulators */
 static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
 };
 
+static const char * const sm8550_qmp_phy_vreg_l[] = {
+	"vdda-phy", "vdda-pll", "vdda-qref",
+};
+
 /* list of resets */
 static const char * const ipq8074_pciephy_reset_l[] = {
 	"phy", "common",
@@ -1657,6 +1904,10 @@ static const char * const sdm845_pciephy_reset_l[] = {
 	"phy",
 };
 
+static const char * const sm8550_pciephy_nocsr_reset_l[] = {
+	"pcie_1_nocsr_com_phy_reset",
+};
+
 static const struct qmp_pcie_offsets qmp_pcie_offsets_v5 = {
 	.serdes		= 0,
 	.pcs		= 0x0200,
@@ -1667,6 +1918,17 @@ static const struct qmp_pcie_offsets qmp_pcie_offsets_v5 = {
 	.rx2		= 0x1800,
 };
 
+static const struct qmp_pcie_offsets qmp_pcie_offsets_v6_20 = {
+	.serdes		= 0x1000,
+	.pcs		= 0x1200,
+	.pcs_misc	= 0x1400,
+	.tx		= 0x0,
+	.rx		= 0x200,
+	.tx2		= 0x800,
+	.rx2		= 0xa00,
+	.ln_shrd	= 0xe00,
+};
+
 static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
 	.lanes			= 1,
 
@@ -2214,6 +2476,69 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
 	.phy_status		= PHYSTATUS_4_20,
 };
 
+static const struct qmp_phy_cfg sm8550_qmp_gen3x2_pciephy_cfg = {
+	.lanes = 2,
+
+	.offsets		= &qmp_pcie_offsets_v5,
+
+	.tbls = {
+		.serdes		= sm8550_qmp_gen3x2_pcie_serdes_tbl,
+		.serdes_num	= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_serdes_tbl),
+		.tx		= sm8550_qmp_gen3x2_pcie_tx_tbl,
+		.tx_num		= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_tx_tbl),
+		.rx		= sm8550_qmp_gen3x2_pcie_rx_tbl,
+		.rx_num		= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_rx_tbl),
+		.pcs		= sm8550_qmp_gen3x2_pcie_pcs_tbl,
+		.pcs_num	= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_pcs_tbl),
+		.pcs_misc	= sm8550_qmp_gen3x2_pcie_pcs_misc_tbl,
+		.pcs_misc_num	= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_pcs_misc_tbl),
+	},
+	.clk_list		= sc8280xp_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(sc8280xp_pciephy_clk_l),
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= pciephy_v5_regs_layout,
+
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
+	.lanes = 2,
+
+	.offsets		= &qmp_pcie_offsets_v6_20,
+
+	.tbls = {
+		.serdes			= sm8550_qmp_gen4x2_pcie_serdes_tbl,
+		.serdes_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_serdes_tbl),
+		.ln_shrd_serdes		= sm8550_qmp_gen4x2_pcie_serdes_ln_shrd_tbl,
+		.ln_shrd_serdes_num	= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_serdes_ln_shrd_tbl),
+		.tx			= sm8550_qmp_gen4x2_pcie_tx_tbl,
+		.tx_num			= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_tx_tbl),
+		.rx			= sm8550_qmp_gen4x2_pcie_rx_tbl,
+		.rx_num			= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_rx_tbl),
+		.pcs			= sm8550_qmp_gen4x2_pcie_pcs_tbl,
+		.pcs_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_tbl),
+		.pcs_misc		= sm8550_qmp_gen4x2_pcie_pcs_misc_tbl,
+		.pcs_misc_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_misc_tbl),
+	},
+	.clk_list		= sm8550_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(sm8550_pciephy_clk_l),
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.nocsr_reset_list	= sm8550_pciephy_nocsr_reset_l,
+	.num_nocsr_resets	= ARRAY_SIZE(sm8550_pciephy_nocsr_reset_l),
+	.vreg_list		= sm8550_qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
+	.regs			= pciephy_v5_regs_layout,
+
+	.has_ln_shrd_serdes_tbl	= true,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS_4_20,
+};
+
 static void qmp_pcie_configure_lane(void __iomem *base,
 					const struct qmp_phy_init_tbl tbl[],
 					int num,
@@ -2262,6 +2587,7 @@ static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_c
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	void __iomem *serdes = qmp->serdes;
+	void __iomem *ln_shrd_serdes = qmp->ln_shrd_serdes;
 	void __iomem *tx = qmp->tx;
 	void __iomem *rx = qmp->rx;
 	void __iomem *tx2 = qmp->tx2;
@@ -2289,6 +2615,10 @@ static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_c
 		qmp_pcie_configure(serdes, cfg->serdes_4ln_tbl, cfg->serdes_4ln_num);
 		qmp_pcie_init_port_b(qmp, tbls);
 	}
+
+	if (cfg->has_ln_shrd_serdes_tbl)
+		qmp_pcie_configure(ln_shrd_serdes, tbls->ln_shrd_serdes,
+				       tbls->ln_shrd_serdes_num);
 }
 
 static int qmp_pcie_init(struct phy *phy)
@@ -2309,6 +2639,14 @@ static int qmp_pcie_init(struct phy *phy)
 		goto err_disable_regulators;
 	}
 
+	if (qmp->nocsr_resets) {
+		ret = reset_control_bulk_assert(cfg->num_nocsr_resets, qmp->nocsr_resets);
+		if (ret) {
+			dev_err(qmp->dev, "no-csr reset assert failed\n");
+			goto err_disable_regulators;
+		}
+	}
+
 	usleep_range(200, 300);
 
 	ret = reset_control_bulk_deassert(cfg->num_resets, qmp->resets);
@@ -2370,6 +2708,14 @@ static int qmp_pcie_power_on(struct phy *phy)
 	if (ret)
 		return ret;
 
+	if (qmp->nocsr_resets) {
+		ret = reset_control_bulk_deassert(cfg->num_nocsr_resets, qmp->nocsr_resets);
+		if (ret) {
+			dev_err(qmp->dev, "no-csr reset deassert failed\n");
+			goto err_disable_pipe_clk;
+		}
+	}
+
 	/* Pull PHY out of reset state */
 	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
 
@@ -2503,6 +2849,21 @@ static int qmp_pcie_reset_init(struct qmp_pcie *qmp)
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to get resets\n");
 
+	if (cfg->nocsr_reset_list) {
+		qmp->nocsr_resets = devm_kcalloc(dev, cfg->num_nocsr_resets,
+				   sizeof(*qmp->nocsr_resets), GFP_KERNEL);
+		if (!qmp->nocsr_resets)
+			return -ENOMEM;
+
+		for (i = 0; i < cfg->num_nocsr_resets; i++)
+			qmp->nocsr_resets[i].id = cfg->nocsr_reset_list[i];
+
+		ret = devm_reset_control_bulk_get_exclusive(dev, cfg->num_nocsr_resets,
+								qmp->nocsr_resets);
+		if (ret)
+			return dev_err_probe(dev, ret, "failed to get no CSR resets\n");
+	}
+
 	return 0;
 }
 
@@ -2713,6 +3074,8 @@ static int qmp_pcie_parse_dt(struct qmp_pcie *qmp)
 	qmp->pcs_misc = base + offs->pcs_misc;
 	qmp->tx = base + offs->tx;
 	qmp->rx = base + offs->rx;
+	if (cfg->has_ln_shrd_serdes_tbl)
+		qmp->ln_shrd_serdes = base + offs->ln_shrd;
 
 	if (cfg->lanes >= 2) {
 		qmp->tx2 = base + offs->tx2;
@@ -2865,6 +3228,12 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
 		.data = &sm8450_qmp_gen4x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy",
+		.data = &sm8550_qmp_gen3x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy",
+		.data = &sm8550_qmp_gen4x2_pciephy_cfg,
 	},
 	{ },
 };
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v2 7/7] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs

[Abel Vesa]

Add the SM8550 both g4 and g3 configurations. In addition, there is a
new "lane shared" table that needs to be configured for g4, along with
the No-CSR list of resets.

Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 369 +++++++++++++++++++++++
 1 file changed, 369 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index bffb9e138715..6f82604bd430 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1506,6 +1506,234 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl[] =
 	QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x08),
 };
 
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xf8),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x93),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_ENABLE1, 0x90),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYS_CLK_CTRL, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x42),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_SELECT, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC_3, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0xa0),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x15),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_4, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_PI_QEC_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x18),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_GM_CAL, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_LOW, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH, 0x5c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH2, 0x9c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH3, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH4, 0x89),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_LOW, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH, 0x94),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH2, 0x5b),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH3, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH4, 0x89),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_TX_ADAPT_POST_THRESH, 0xf0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FO_GAIN, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_GAIN, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIDGET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_TRIM, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_REFGEN_REQ_CONFIG1, 0x05),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RX_SIGDET_LVL, 0x77),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RATE_SLEW_CNTRL1, 0x0b),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG2, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_PCS_TX_RX_CONFIG, 0x8c),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG2, 0x1d),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x26),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x68),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xf8),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_POST_DIV_MUX, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_ENABLE1, 0x90),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYS_CLK_CTRL, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x46),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_SELECT, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_MISC_1, 0x88),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_MODE, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_VCO_DC_LEVEL_CTRL, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_serdes_ln_shrd_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_Q_EN_RATES, 0xe),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3, 0x9a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5, 0xb6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6, 0x64),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_LANE_MODE_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_LANE_MODE_2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_LANE_MODE_3, 0x51),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN, 0x34),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_PI_CONTROLS, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_IVCM_CAL_CTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET, 0x7c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_3, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_VGA_CAL_MAN_VAL, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_GM_CAL, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_PHPRE_CTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B0, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B1, 0xb3),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B2, 0x58),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B3, 0x9a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B4, 0x26),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B5, 0xb6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B6, 0xee),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B0, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B1, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B2, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B3, 0xdf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B4, 0x78),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B5, 0x76),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B6, 0xff),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_G3S2_PRE_GAIN, 0x2e),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_COM_ELECIDLE_DLY_SEL, 0x25),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_EQ_CONFIG4, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_EQ_CONFIG5, 0x22),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_TX_RX_CONFIG1, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_TX_RX_CONFIG2, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE, 0xc1),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_EQ_CONFIG1, 0x16),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_EQ_CONFIG5, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G4_PRE_GAIN, 0x2e),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG1, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG3, 0x28),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG, 0xc0),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2, 0x1d),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG5, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G3_FOM_EQ_CONFIG5, 0xf2),
+	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5, 0xf2),
+};
+
 struct qmp_pcie_offsets {
 	u16 serdes;
 	u16 pcs;
@@ -1514,11 +1742,14 @@ struct qmp_pcie_offsets {
 	u16 rx;
 	u16 tx2;
 	u16 rx2;
+	u16 ln_shrd;
 };
 
 struct qmp_phy_cfg_tbls {
 	const struct qmp_phy_init_tbl *serdes;
 	int serdes_num;
+	const struct qmp_phy_init_tbl *ln_shrd_serdes;
+	int ln_shrd_serdes_num;
 	const struct qmp_phy_init_tbl *tx;
 	int tx_num;
 	const struct qmp_phy_init_tbl *rx;
@@ -1556,6 +1787,9 @@ struct qmp_phy_cfg {
 	/* resets to be requested */
 	const char * const *reset_list;
 	int num_resets;
+	/* no CSR resets to be requested */
+	const char * const *nocsr_reset_list;
+	int num_nocsr_resets;
 	/* regulators to be requested */
 	const char * const *vreg_list;
 	int num_vregs;
@@ -1569,6 +1803,9 @@ struct qmp_phy_cfg {
 
 	bool skip_start_delay;
 
+	/* true, if PHY has lane shared serdes table */
+	bool has_ln_shrd_serdes_tbl;
+
 	/* QMP PHY pipe clock interface rate */
 	unsigned long pipe_clock_rate;
 };
@@ -1580,6 +1817,7 @@ struct qmp_pcie {
 	bool tcsr_4ln_config;
 
 	void __iomem *serdes;
+	void __iomem *ln_shrd_serdes;
 	void __iomem *pcs;
 	void __iomem *pcs_misc;
 	void __iomem *tx;
@@ -1594,6 +1832,7 @@ struct qmp_pcie {
 	int num_pipe_clks;
 
 	struct reset_control_bulk_data *resets;
+	struct reset_control_bulk_data *nocsr_resets;
 	struct regulator_bulk_data *vregs;
 
 	struct phy *phy;
@@ -1643,11 +1882,19 @@ static const char * const sdm845_pciephy_clk_l[] = {
 	"aux", "cfg_ahb", "ref", "refgen",
 };
 
+static const char * const sm8550_pciephy_clk_l[] = {
+	"aux", "aux_phy", "cfg_ahb", "ref", "rchng",
+};
+
 /* list of regulators */
 static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
 };
 
+static const char * const sm8550_qmp_phy_vreg_l[] = {
+	"vdda-phy", "vdda-pll", "vdda-qref",
+};
+
 /* list of resets */
 static const char * const ipq8074_pciephy_reset_l[] = {
 	"phy", "common",
@@ -1657,6 +1904,10 @@ static const char * const sdm845_pciephy_reset_l[] = {
 	"phy",
 };
 
+static const char * const sm8550_pciephy_nocsr_reset_l[] = {
+	"pcie_1_nocsr_com_phy_reset",
+};
+
 static const struct qmp_pcie_offsets qmp_pcie_offsets_v5 = {
 	.serdes		= 0,
 	.pcs		= 0x0200,
@@ -1667,6 +1918,17 @@ static const struct qmp_pcie_offsets qmp_pcie_offsets_v5 = {
 	.rx2		= 0x1800,
 };
 
+static const struct qmp_pcie_offsets qmp_pcie_offsets_v6_20 = {
+	.serdes		= 0x1000,
+	.pcs		= 0x1200,
+	.pcs_misc	= 0x1400,
+	.tx		= 0x0,
+	.rx		= 0x200,
+	.tx2		= 0x800,
+	.rx2		= 0xa00,
+	.ln_shrd	= 0xe00,
+};
+
 static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
 	.lanes			= 1,
 
@@ -2214,6 +2476,69 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
 	.phy_status		= PHYSTATUS_4_20,
 };
 
+static const struct qmp_phy_cfg sm8550_qmp_gen3x2_pciephy_cfg = {
+	.lanes = 2,
+
+	.offsets		= &qmp_pcie_offsets_v5,
+
+	.tbls = {
+		.serdes		= sm8550_qmp_gen3x2_pcie_serdes_tbl,
+		.serdes_num	= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_serdes_tbl),
+		.tx		= sm8550_qmp_gen3x2_pcie_tx_tbl,
+		.tx_num		= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_tx_tbl),
+		.rx		= sm8550_qmp_gen3x2_pcie_rx_tbl,
+		.rx_num		= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_rx_tbl),
+		.pcs		= sm8550_qmp_gen3x2_pcie_pcs_tbl,
+		.pcs_num	= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_pcs_tbl),
+		.pcs_misc	= sm8550_qmp_gen3x2_pcie_pcs_misc_tbl,
+		.pcs_misc_num	= ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_pcs_misc_tbl),
+	},
+	.clk_list		= sc8280xp_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(sc8280xp_pciephy_clk_l),
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= pciephy_v5_regs_layout,
+
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS,
+};
+
+static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
+	.lanes = 2,
+
+	.offsets		= &qmp_pcie_offsets_v6_20,
+
+	.tbls = {
+		.serdes			= sm8550_qmp_gen4x2_pcie_serdes_tbl,
+		.serdes_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_serdes_tbl),
+		.ln_shrd_serdes		= sm8550_qmp_gen4x2_pcie_serdes_ln_shrd_tbl,
+		.ln_shrd_serdes_num	= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_serdes_ln_shrd_tbl),
+		.tx			= sm8550_qmp_gen4x2_pcie_tx_tbl,
+		.tx_num			= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_tx_tbl),
+		.rx			= sm8550_qmp_gen4x2_pcie_rx_tbl,
+		.rx_num			= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_rx_tbl),
+		.pcs			= sm8550_qmp_gen4x2_pcie_pcs_tbl,
+		.pcs_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_tbl),
+		.pcs_misc		= sm8550_qmp_gen4x2_pcie_pcs_misc_tbl,
+		.pcs_misc_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_misc_tbl),
+	},
+	.clk_list		= sm8550_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(sm8550_pciephy_clk_l),
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.nocsr_reset_list	= sm8550_pciephy_nocsr_reset_l,
+	.num_nocsr_resets	= ARRAY_SIZE(sm8550_pciephy_nocsr_reset_l),
+	.vreg_list		= sm8550_qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
+	.regs			= pciephy_v5_regs_layout,
+
+	.has_ln_shrd_serdes_tbl	= true,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS_4_20,
+};
+
 static void qmp_pcie_configure_lane(void __iomem *base,
 					const struct qmp_phy_init_tbl tbl[],
 					int num,
@@ -2262,6 +2587,7 @@ static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_c
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	void __iomem *serdes = qmp->serdes;
+	void __iomem *ln_shrd_serdes = qmp->ln_shrd_serdes;
 	void __iomem *tx = qmp->tx;
 	void __iomem *rx = qmp->rx;
 	void __iomem *tx2 = qmp->tx2;
@@ -2289,6 +2615,10 @@ static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_c
 		qmp_pcie_configure(serdes, cfg->serdes_4ln_tbl, cfg->serdes_4ln_num);
 		qmp_pcie_init_port_b(qmp, tbls);
 	}
+
+	if (cfg->has_ln_shrd_serdes_tbl)
+		qmp_pcie_configure(ln_shrd_serdes, tbls->ln_shrd_serdes,
+				       tbls->ln_shrd_serdes_num);
 }
 
 static int qmp_pcie_init(struct phy *phy)
@@ -2309,6 +2639,14 @@ static int qmp_pcie_init(struct phy *phy)
 		goto err_disable_regulators;
 	}
 
+	if (qmp->nocsr_resets) {
+		ret = reset_control_bulk_assert(cfg->num_nocsr_resets, qmp->nocsr_resets);
+		if (ret) {
+			dev_err(qmp->dev, "no-csr reset assert failed\n");
+			goto err_disable_regulators;
+		}
+	}
+
 	usleep_range(200, 300);
 
 	ret = reset_control_bulk_deassert(cfg->num_resets, qmp->resets);
@@ -2370,6 +2708,14 @@ static int qmp_pcie_power_on(struct phy *phy)
 	if (ret)
 		return ret;
 
+	if (qmp->nocsr_resets) {
+		ret = reset_control_bulk_deassert(cfg->num_nocsr_resets, qmp->nocsr_resets);
+		if (ret) {
+			dev_err(qmp->dev, "no-csr reset deassert failed\n");
+			goto err_disable_pipe_clk;
+		}
+	}
+
 	/* Pull PHY out of reset state */
 	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
 
@@ -2503,6 +2849,21 @@ static int qmp_pcie_reset_init(struct qmp_pcie *qmp)
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to get resets\n");
 
+	if (cfg->nocsr_reset_list) {
+		qmp->nocsr_resets = devm_kcalloc(dev, cfg->num_nocsr_resets,
+				   sizeof(*qmp->nocsr_resets), GFP_KERNEL);
+		if (!qmp->nocsr_resets)
+			return -ENOMEM;
+
+		for (i = 0; i < cfg->num_nocsr_resets; i++)
+			qmp->nocsr_resets[i].id = cfg->nocsr_reset_list[i];
+
+		ret = devm_reset_control_bulk_get_exclusive(dev, cfg->num_nocsr_resets,
+								qmp->nocsr_resets);
+		if (ret)
+			return dev_err_probe(dev, ret, "failed to get no CSR resets\n");
+	}
+
 	return 0;
 }
 
@@ -2713,6 +3074,8 @@ static int qmp_pcie_parse_dt(struct qmp_pcie *qmp)
 	qmp->pcs_misc = base + offs->pcs_misc;
 	qmp->tx = base + offs->tx;
 	qmp->rx = base + offs->rx;
+	if (cfg->has_ln_shrd_serdes_tbl)
+		qmp->ln_shrd_serdes = base + offs->ln_shrd;
 
 	if (cfg->lanes >= 2) {
 		qmp->tx2 = base + offs->tx2;
@@ -2865,6 +3228,12 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy",
 		.data = &sm8450_qmp_gen4x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy",
+		.data = &sm8550_qmp_gen3x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy",
+		.data = &sm8550_qmp_gen4x2_pciephy_cfg,
 	},
 	{ },
 };
-- 
2.34.1

Re: [PATCH v2 0/7] phy: qualcomm: Add PCIe support for SM8550

[Abel Vesa]

On 23-01-18 02:38:27, Abel Vesa wrote:
> This patchset relies on the following patchset:
> https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/
> 
> The v1 of this patchset is:
> https://lore.kernel.org/all/20221116120157.2706810-1-abel.vesa@linaro.org/
> 

Please ignore this version. I missed the bindings update patch.

> Changes since v1:
>  * dropped all PCIe unrelated patches and also register offsets
>  * split all the offsets into separate patches, like Vinod suggested
>  * dropped the legacy dt parse changes since we intend to support
>    only the new dt parse mechanism from now on
> 
> Abel Vesa (7):
>   phy: qcom-qmp: pcs: Add v6 register offsets
>   phy: qcom-qmp: pcs: Add v6.20 register offsets
>   phy: qcom-qmp: pcs-pcie: Add v6 register offsets
>   phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
>   phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
>   phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
>   phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
> 
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 371 ++++++++++++++++++
>  .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h   |  15 +
>  .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h    |  23 ++
>  drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h    |  16 +
>  drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h |  18 +
>  .../phy-qcom-qmp-qserdes-ln-shrd-v6.h         |  32 ++
>  .../phy-qcom-qmp-qserdes-txrx-v6_20.h         |  45 +++
>  drivers/phy/qualcomm/phy-qcom-qmp.h           |   6 +
>  8 files changed, 526 insertions(+)
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
> 
> -- 
> 2.34.1
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v2 0/7] phy: qualcomm: Add PCIe support for SM8550

[Abel Vesa]

On 23-01-18 02:38:27, Abel Vesa wrote:
> This patchset relies on the following patchset:
> https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/
> 
> The v1 of this patchset is:
> https://lore.kernel.org/all/20221116120157.2706810-1-abel.vesa@linaro.org/
> 

Please ignore this version. I missed the bindings update patch.

> Changes since v1:
>  * dropped all PCIe unrelated patches and also register offsets
>  * split all the offsets into separate patches, like Vinod suggested
>  * dropped the legacy dt parse changes since we intend to support
>    only the new dt parse mechanism from now on
> 
> Abel Vesa (7):
>   phy: qcom-qmp: pcs: Add v6 register offsets
>   phy: qcom-qmp: pcs: Add v6.20 register offsets
>   phy: qcom-qmp: pcs-pcie: Add v6 register offsets
>   phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
>   phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
>   phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
>   phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
> 
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 371 ++++++++++++++++++
>  .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h   |  15 +
>  .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h    |  23 ++
>  drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h    |  16 +
>  drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h |  18 +
>  .../phy-qcom-qmp-qserdes-ln-shrd-v6.h         |  32 ++
>  .../phy-qcom-qmp-qserdes-txrx-v6_20.h         |  45 +++
>  drivers/phy/qualcomm/phy-qcom-qmp.h           |   6 +
>  8 files changed, 526 insertions(+)
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
> 
> -- 
> 2.34.1
>