* [PATCH 0/2] Add support for Samsung Galaxy S5 (Exynos)
@ 2023-01-19 18:58 ` Markuss Broks
0 siblings, 0 replies; 12+ messages in thread
From: Markuss Broks @ 2023-01-19 18:58 UTC (permalink / raw)
To: linux-kernel
Cc: Markuss Broks, Krzysztof Kozlowski, Alim Akhtar, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, linux-arm-kernel,
linux-samsung-soc, devicetree
Samsung Galaxy S5 (Exynos) is a mobile phone released in 2014.
It has an Exynos5422 platform. This version of Galaxy S5 is only
capable of 3G communication using the Intel modem, while the
LTE version of the device (klte) has a Qualcomm Snapdragon SoC.
Currently, internal eMMC, USB, regulators on a PMIC, and touchscreen
are enabled in the device-tree.
It also has the following peripherals:
- 5" 1080p S6E3FA2 DSI display,
- Cypress StreetFighter touch buttons,
- Broadcom BCM4354 wireless connectivity module,
- Intel XMM6360 3G modem,
- STM32F401 serving as a sensor hub,
- Validify Solutions VFS61 series fingerprint sensor,
- Lattice ICE401M FPGA as an IRDA controller,
- Maxim MAX86900 heart rate sensor,
- NXP PN547 NFC controller,
- Wolfson WM5110 Audio DSP,
- Broadcom BCM4753 GPS radio,
- Maxim MAX77804 PMIC,
- Silicon Image SII8240 MHL controller,
- TI LP5562 LED driver
Markuss Broks (2):
Documentation: devicetree: bindings: Add compatible for Samsung Galaxy
S5 (Exynos)
arm: dts: Add device-tree for Samsung Galaxy S5 (Exynos)
.../bindings/arm/samsung/samsung-boards.yaml | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 676 ++++++++++++++++++
3 files changed, 678 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5422-samsung-k3g.dts
--
2.39.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 0/2] Add support for Samsung Galaxy S5 (Exynos)
@ 2023-01-19 18:58 ` Markuss Broks
0 siblings, 0 replies; 12+ messages in thread
From: Markuss Broks @ 2023-01-19 18:58 UTC (permalink / raw)
To: linux-kernel
Cc: Markuss Broks, Krzysztof Kozlowski, Alim Akhtar, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, linux-arm-kernel,
linux-samsung-soc, devicetree
Samsung Galaxy S5 (Exynos) is a mobile phone released in 2014.
It has an Exynos5422 platform. This version of Galaxy S5 is only
capable of 3G communication using the Intel modem, while the
LTE version of the device (klte) has a Qualcomm Snapdragon SoC.
Currently, internal eMMC, USB, regulators on a PMIC, and touchscreen
are enabled in the device-tree.
It also has the following peripherals:
- 5" 1080p S6E3FA2 DSI display,
- Cypress StreetFighter touch buttons,
- Broadcom BCM4354 wireless connectivity module,
- Intel XMM6360 3G modem,
- STM32F401 serving as a sensor hub,
- Validify Solutions VFS61 series fingerprint sensor,
- Lattice ICE401M FPGA as an IRDA controller,
- Maxim MAX86900 heart rate sensor,
- NXP PN547 NFC controller,
- Wolfson WM5110 Audio DSP,
- Broadcom BCM4753 GPS radio,
- Maxim MAX77804 PMIC,
- Silicon Image SII8240 MHL controller,
- TI LP5562 LED driver
Markuss Broks (2):
Documentation: devicetree: bindings: Add compatible for Samsung Galaxy
S5 (Exynos)
arm: dts: Add device-tree for Samsung Galaxy S5 (Exynos)
.../bindings/arm/samsung/samsung-boards.yaml | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 676 ++++++++++++++++++
3 files changed, 678 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5422-samsung-k3g.dts
--
2.39.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] Documentation: devicetree: bindings: Add compatible for Samsung Galaxy S5 (Exynos)
2023-01-19 18:58 ` Markuss Broks
@ 2023-01-19 18:58 ` Markuss Broks
-1 siblings, 0 replies; 12+ messages in thread
From: Markuss Broks @ 2023-01-19 18:58 UTC (permalink / raw)
To: linux-kernel
Cc: Markuss Broks, Krzysztof Kozlowski, Alim Akhtar, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, linux-arm-kernel,
linux-samsung-soc, devicetree
Add the compatible for k3g in the Samsung Exynos5800 boards section.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
.../devicetree/bindings/arm/samsung/samsung-boards.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index faea33e4f731..fc7c191640ae 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -171,6 +171,7 @@ properties:
- hardkernel,odroid-xu3-lite # Hardkernel Odroid XU3 Lite
- hardkernel,odroid-xu4 # Hardkernel Odroid XU4
- hardkernel,odroid-hc1 # Hardkernel Odroid HC1
+ - samsung,k3g # Samsung Galaxy S5 (Exynos)
- const: samsung,exynos5800
- const: samsung,exynos5
--
2.39.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 1/2] Documentation: devicetree: bindings: Add compatible for Samsung Galaxy S5 (Exynos)
@ 2023-01-19 18:58 ` Markuss Broks
0 siblings, 0 replies; 12+ messages in thread
From: Markuss Broks @ 2023-01-19 18:58 UTC (permalink / raw)
To: linux-kernel
Cc: Markuss Broks, Krzysztof Kozlowski, Alim Akhtar, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, linux-arm-kernel,
linux-samsung-soc, devicetree
Add the compatible for k3g in the Samsung Exynos5800 boards section.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
.../devicetree/bindings/arm/samsung/samsung-boards.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index faea33e4f731..fc7c191640ae 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -171,6 +171,7 @@ properties:
- hardkernel,odroid-xu3-lite # Hardkernel Odroid XU3 Lite
- hardkernel,odroid-xu4 # Hardkernel Odroid XU4
- hardkernel,odroid-hc1 # Hardkernel Odroid HC1
+ - samsung,k3g # Samsung Galaxy S5 (Exynos)
- const: samsung,exynos5800
- const: samsung,exynos5
--
2.39.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] arm: dts: Add device-tree for Samsung Galaxy S5 (Exynos)
2023-01-19 18:58 ` Markuss Broks
@ 2023-01-19 18:58 ` Markuss Broks
-1 siblings, 0 replies; 12+ messages in thread
From: Markuss Broks @ 2023-01-19 18:58 UTC (permalink / raw)
To: linux-kernel
Cc: Markuss Broks, Krzysztof Kozlowski, Alim Akhtar, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, linux-arm-kernel,
linux-samsung-soc, devicetree
Samsung Galaxy S5 (Exynos) was sold alongside Samsung Galaxy S5
with Snapdragon SoC, however the Exynos version features a 3G
capable Intel modem instead of Qualcomm version featuring LTE modem.
This phone is based on Exynos5422. Currently, the touchscreen,
USB, eMMC and the PMIC are enabled in the device-tree.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 676 +++++++++++++++++++
2 files changed, 677 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5422-samsung-k3g.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c014f4fc53c0..b3aa4ad73d52 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -246,6 +246,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
exynos5422-odroidxu4.dtb \
+ exynos5422-samsung-k3g.dtb \
exynos5800-peach-pi.dtb
dtb-$(CONFIG_ARCH_GEMINI) += \
gemini-dlink-dir-685.dtb \
diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
new file mode 100644
index 000000000000..b1da32a6d41d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy S5 (Exynos) device-tree source
+ *
+ * Copyright (c) 2023 Markuss Broks
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+
+/ {
+ model = "Samsung Galaxy S5 (Exynos)";
+ compatible = "samsung,k3g", "samsung,exynos5800", \
+ "samsung,exynos5";
+
+ chassis-type = "handset";
+
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x20000000 0x80000000>; /* 2 GiB */
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ firmware@2073000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02073000 0x1000>;
+ };
+
+ tsp_vdd: tsp-vdd-en {
+ compatible = "regulator-fixed";
+ regulator-name = "tsp_vdd_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpy3 5 0>;
+ enable-active-high;
+ };
+
+};
+
+&cpu0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+ status = "okay";
+
+ pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
+ s2mps11_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_1V1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_ARM_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_INT_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_G3D_1V0";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "VDD_KFC_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VIN_LLDO_1V4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VIN_MLDO_2V0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VIN_HLDO_3V5";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "VDD_CAM_ISP_1V0";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3550000>;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_APIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_APIO_MMC01_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_ADC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "HRM_1P8_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MIPI_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_MIPI_PLL_ABB1_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_VTF_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_UOTG_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDDQ_PRE_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_HSIC_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_HSIC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDD_APIO_MMC2_2V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD_MOTOR_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD_CAM1_CAM_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD_AP_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo17_reg: LDO17 {
+ /* Unused */
+ regulator-name = "VDD_LDO17";
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_CODEC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VDD_VMMC_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VDD_CAM1_CAM_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD_CAM_IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VDD_CAM0_S_CORE_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "VDD_MIFS_1V1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VDD_MHL_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VDD_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "VDD_CAM0_AF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VDD_G3DS_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "VDD_LCD_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo29_reg: LDO29 {
+ /* Unused */
+ regulator-name = "VDD_LDO29";
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "VDD_TOUCH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "VDD_COMP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "VDD_TOUCH_IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "VDD_MHL_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "VDD_HRM_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "VDD_SIL_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo36_reg: LDO36 {
+ /* Unused */
+ regulator-name = "VDD_LDO36";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo37_reg: LDO37 {
+ /* Unused */
+ regulator-name = "VDD_LDO37";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "VDD_KEY_LED_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c_0 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ vio-supply = <&ldo32_reg>;
+ vdd-supply = <&tsp_vdd>;
+ syna,startup-delay-ms = <100>;
+
+ pinctrl-0 = <&touch_pin>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+/* eMMC flash */
+&mmc_0 {
+ status = "okay";
+ mmc-hs200-1_8v;
+ cap-mmc-highspeed;
+ non-removable;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+ samsung,read-strobe-delay = <90>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
+ bus-width = <8>;
+};
+
+&pinctrl_0 {
+ s2mps11_irq: s2mps11-irq-pin {
+ samsung,pins = "gpx0-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ touch_pin: touch-int-pin {
+ samsung,pins = "gpx1-6";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&timer {
+ arm,cpu-registers-not-fw-configured;
+};
+
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
--
2.39.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] arm: dts: Add device-tree for Samsung Galaxy S5 (Exynos)
@ 2023-01-19 18:58 ` Markuss Broks
0 siblings, 0 replies; 12+ messages in thread
From: Markuss Broks @ 2023-01-19 18:58 UTC (permalink / raw)
To: linux-kernel
Cc: Markuss Broks, Krzysztof Kozlowski, Alim Akhtar, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, linux-arm-kernel,
linux-samsung-soc, devicetree
Samsung Galaxy S5 (Exynos) was sold alongside Samsung Galaxy S5
with Snapdragon SoC, however the Exynos version features a 3G
capable Intel modem instead of Qualcomm version featuring LTE modem.
This phone is based on Exynos5422. Currently, the touchscreen,
USB, eMMC and the PMIC are enabled in the device-tree.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 676 +++++++++++++++++++
2 files changed, 677 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5422-samsung-k3g.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c014f4fc53c0..b3aa4ad73d52 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -246,6 +246,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
exynos5422-odroidxu4.dtb \
+ exynos5422-samsung-k3g.dtb \
exynos5800-peach-pi.dtb
dtb-$(CONFIG_ARCH_GEMINI) += \
gemini-dlink-dir-685.dtb \
diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
new file mode 100644
index 000000000000..b1da32a6d41d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy S5 (Exynos) device-tree source
+ *
+ * Copyright (c) 2023 Markuss Broks
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+
+/ {
+ model = "Samsung Galaxy S5 (Exynos)";
+ compatible = "samsung,k3g", "samsung,exynos5800", \
+ "samsung,exynos5";
+
+ chassis-type = "handset";
+
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x20000000 0x80000000>; /* 2 GiB */
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ firmware@2073000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02073000 0x1000>;
+ };
+
+ tsp_vdd: tsp-vdd-en {
+ compatible = "regulator-fixed";
+ regulator-name = "tsp_vdd_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpy3 5 0>;
+ enable-active-high;
+ };
+
+};
+
+&cpu0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+ status = "okay";
+
+ pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
+ s2mps11_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_1V1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_ARM_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_INT_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_G3D_1V0";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "VDD_KFC_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VIN_LLDO_1V4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VIN_MLDO_2V0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VIN_HLDO_3V5";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "VDD_CAM_ISP_1V0";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3550000>;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_APIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_APIO_MMC01_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_ADC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "HRM_1P8_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MIPI_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_MIPI_PLL_ABB1_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_VTF_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_UOTG_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDDQ_PRE_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_HSIC_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_HSIC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDD_APIO_MMC2_2V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD_MOTOR_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD_CAM1_CAM_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD_AP_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo17_reg: LDO17 {
+ /* Unused */
+ regulator-name = "VDD_LDO17";
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_CODEC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VDD_VMMC_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VDD_CAM1_CAM_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD_CAM_IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VDD_CAM0_S_CORE_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "VDD_MIFS_1V1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VDD_MHL_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VDD_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "VDD_CAM0_AF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VDD_G3DS_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "VDD_LCD_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo29_reg: LDO29 {
+ /* Unused */
+ regulator-name = "VDD_LDO29";
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "VDD_TOUCH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "VDD_COMP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "VDD_TOUCH_IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "VDD_MHL_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "VDD_HRM_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "VDD_SIL_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo36_reg: LDO36 {
+ /* Unused */
+ regulator-name = "VDD_LDO36";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo37_reg: LDO37 {
+ /* Unused */
+ regulator-name = "VDD_LDO37";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "VDD_KEY_LED_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c_0 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ vio-supply = <&ldo32_reg>;
+ vdd-supply = <&tsp_vdd>;
+ syna,startup-delay-ms = <100>;
+
+ pinctrl-0 = <&touch_pin>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+/* eMMC flash */
+&mmc_0 {
+ status = "okay";
+ mmc-hs200-1_8v;
+ cap-mmc-highspeed;
+ non-removable;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+ samsung,read-strobe-delay = <90>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
+ bus-width = <8>;
+};
+
+&pinctrl_0 {
+ s2mps11_irq: s2mps11-irq-pin {
+ samsung,pins = "gpx0-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ touch_pin: touch-int-pin {
+ samsung,pins = "gpx1-6";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&timer {
+ arm,cpu-registers-not-fw-configured;
+};
+
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
--
2.39.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] Documentation: devicetree: bindings: Add compatible for Samsung Galaxy S5 (Exynos)
2023-01-19 18:58 ` Markuss Broks
@ 2023-01-20 7:25 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-20 7:25 UTC (permalink / raw)
To: Markuss Broks, linux-kernel
Cc: Alim Akhtar, Rob Herring, Arnd Bergmann, Olof Johansson, soc,
linux-arm-kernel, linux-samsung-soc, devicetree
On 19/01/2023 19:58, Markuss Broks wrote:
> Add the compatible for k3g in the Samsung Exynos5800 boards section.
>
Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] Documentation: devicetree: bindings: Add compatible for Samsung Galaxy S5 (Exynos)
@ 2023-01-20 7:25 ` Krzysztof Kozlowski
0 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-20 7:25 UTC (permalink / raw)
To: Markuss Broks, linux-kernel
Cc: Alim Akhtar, Rob Herring, Arnd Bergmann, Olof Johansson, soc,
linux-arm-kernel, linux-samsung-soc, devicetree
On 19/01/2023 19:58, Markuss Broks wrote:
> Add the compatible for k3g in the Samsung Exynos5800 boards section.
>
Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm: dts: Add device-tree for Samsung Galaxy S5 (Exynos)
2023-01-19 18:58 ` Markuss Broks
@ 2023-01-20 7:35 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-20 7:35 UTC (permalink / raw)
To: Markuss Broks, linux-kernel
Cc: Alim Akhtar, Rob Herring, Arnd Bergmann, Olof Johansson, soc,
linux-arm-kernel, linux-samsung-soc, devicetree
On 19/01/2023 19:58, Markuss Broks wrote:
> Samsung Galaxy S5 (Exynos) was sold alongside Samsung Galaxy S5
> with Snapdragon SoC, however the Exynos version features a 3G
> capable Intel modem instead of Qualcomm version featuring LTE modem.
> This phone is based on Exynos5422. Currently, the touchscreen,
> USB, eMMC and the PMIC are enabled in the device-tree.
Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).
>
> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 676 +++++++++++++++++++
> 2 files changed, 677 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos5422-samsung-k3g.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c014f4fc53c0..b3aa4ad73d52 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -246,6 +246,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
> exynos5422-odroidxu3.dtb \
> exynos5422-odroidxu3-lite.dtb \
> exynos5422-odroidxu4.dtb \
> + exynos5422-samsung-k3g.dtb \
> exynos5800-peach-pi.dtb
> dtb-$(CONFIG_ARCH_GEMINI) += \
> gemini-dlink-dir-685.dtb \
> diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
> new file mode 100644
> index 000000000000..b1da32a6d41d
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
> @@ -0,0 +1,676 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung Galaxy S5 (Exynos) device-tree source
> + *
> + * Copyright (c) 2023 Markuss Broks
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gpio/gpio.h>
Order these by name, so clock, gpio and then interrupt-controller.
> +#include "exynos5800.dtsi"
> +#include "exynos5422-cpus.dtsi"
> +
> +/ {
> + model = "Samsung Galaxy S5 (Exynos)";
Samsung Galaxy S5 (GT-I.....)
This also applies to your binding patch. Do not introduce own style, use
existing style from other boards.
> + compatible = "samsung,k3g", "samsung,exynos5800", \
> + "samsung,exynos5";
This does not look aligned.
> +
> + chassis-type = "handset";
> +
> + memory@20000000 {
> + device_type = "memory";
> + reg = <0x20000000 0x80000000>; /* 2 GiB */
> + };
> +
> + fixed-rate-clocks {
> + oscclk {
> + compatible = "samsung,exynos5420-oscclk";
> + clock-frequency = <24000000>;
> + };
> + };
> +
> + firmware@2073000 {
> + compatible = "samsung,secure-firmware";
> + reg = <0x02073000 0x1000>;
> + };
> +
> + tsp_vdd: tsp-vdd-en {
Generic node names, so regulator-tsp-vdd-en.
> + compatible = "regulator-fixed";
> + regulator-name = "tsp_vdd_en";> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpy3 5 0>;
Use GPIO flags.
> + enable-active-high;
> + };
> +
> +};
> +
> +&cpu0 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&cpu4 {
> + cpu-supply = <&buck6_reg>;
> +};
> +
> +&gpu {
> + status = "okay";
> + mali-supply = <&buck4_reg>;
> +};
> +
> +&hsi2c_7 {
> + status = "okay";
> +
> + pmic@66 {
> + compatible = "samsung,s2mps11-pmic";
> + reg = <0x66>;
> +
> + interrupt-parent = <&gpx0>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + wakeup-source;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&s2mps11_irq>;
> +
> + s2mps11_osc: clocks {
> + compatible = "samsung,s2mps11-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps11_ap",
> + "s2mps11_cp", "s2mps11_bt";
Misaligned.
> + };
> +
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm: dts: Add device-tree for Samsung Galaxy S5 (Exynos)
@ 2023-01-20 7:35 ` Krzysztof Kozlowski
0 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-20 7:35 UTC (permalink / raw)
To: Markuss Broks, linux-kernel
Cc: Alim Akhtar, Rob Herring, Arnd Bergmann, Olof Johansson, soc,
linux-arm-kernel, linux-samsung-soc, devicetree
On 19/01/2023 19:58, Markuss Broks wrote:
> Samsung Galaxy S5 (Exynos) was sold alongside Samsung Galaxy S5
> with Snapdragon SoC, however the Exynos version features a 3G
> capable Intel modem instead of Qualcomm version featuring LTE modem.
> This phone is based on Exynos5422. Currently, the touchscreen,
> USB, eMMC and the PMIC are enabled in the device-tree.
Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).
>
> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 676 +++++++++++++++++++
> 2 files changed, 677 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos5422-samsung-k3g.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c014f4fc53c0..b3aa4ad73d52 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -246,6 +246,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
> exynos5422-odroidxu3.dtb \
> exynos5422-odroidxu3-lite.dtb \
> exynos5422-odroidxu4.dtb \
> + exynos5422-samsung-k3g.dtb \
> exynos5800-peach-pi.dtb
> dtb-$(CONFIG_ARCH_GEMINI) += \
> gemini-dlink-dir-685.dtb \
> diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
> new file mode 100644
> index 000000000000..b1da32a6d41d
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
> @@ -0,0 +1,676 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung Galaxy S5 (Exynos) device-tree source
> + *
> + * Copyright (c) 2023 Markuss Broks
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gpio/gpio.h>
Order these by name, so clock, gpio and then interrupt-controller.
> +#include "exynos5800.dtsi"
> +#include "exynos5422-cpus.dtsi"
> +
> +/ {
> + model = "Samsung Galaxy S5 (Exynos)";
Samsung Galaxy S5 (GT-I.....)
This also applies to your binding patch. Do not introduce own style, use
existing style from other boards.
> + compatible = "samsung,k3g", "samsung,exynos5800", \
> + "samsung,exynos5";
This does not look aligned.
> +
> + chassis-type = "handset";
> +
> + memory@20000000 {
> + device_type = "memory";
> + reg = <0x20000000 0x80000000>; /* 2 GiB */
> + };
> +
> + fixed-rate-clocks {
> + oscclk {
> + compatible = "samsung,exynos5420-oscclk";
> + clock-frequency = <24000000>;
> + };
> + };
> +
> + firmware@2073000 {
> + compatible = "samsung,secure-firmware";
> + reg = <0x02073000 0x1000>;
> + };
> +
> + tsp_vdd: tsp-vdd-en {
Generic node names, so regulator-tsp-vdd-en.
> + compatible = "regulator-fixed";
> + regulator-name = "tsp_vdd_en";> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpy3 5 0>;
Use GPIO flags.
> + enable-active-high;
> + };
> +
> +};
> +
> +&cpu0 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&cpu4 {
> + cpu-supply = <&buck6_reg>;
> +};
> +
> +&gpu {
> + status = "okay";
> + mali-supply = <&buck4_reg>;
> +};
> +
> +&hsi2c_7 {
> + status = "okay";
> +
> + pmic@66 {
> + compatible = "samsung,s2mps11-pmic";
> + reg = <0x66>;
> +
> + interrupt-parent = <&gpx0>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + wakeup-source;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&s2mps11_irq>;
> +
> + s2mps11_osc: clocks {
> + compatible = "samsung,s2mps11-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps11_ap",
> + "s2mps11_cp", "s2mps11_bt";
Misaligned.
> + };
> +
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm: dts: Add device-tree for Samsung Galaxy S5 (Exynos)
2023-01-19 18:58 ` Markuss Broks
@ 2023-01-20 15:01 ` Mark Brown
-1 siblings, 0 replies; 12+ messages in thread
From: Mark Brown @ 2023-01-20 15:01 UTC (permalink / raw)
To: Markuss Broks
Cc: linux-kernel, Krzysztof Kozlowski, Alim Akhtar, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, linux-arm-kernel,
linux-samsung-soc, devicetree
[-- Attachment #1: Type: text/plain, Size: 393 bytes --]
On Thu, Jan 19, 2023 at 08:58:44PM +0200, Markuss Broks wrote:
> + buck2_reg: BUCK2 {
> + regulator-name = "VDD_ARM_1V0";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1500000>;
The naming and constraints on this and a number of the other
regulators don't seem consistent - the naming implies a specific
voltage but there's a fairly wide range permitted.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm: dts: Add device-tree for Samsung Galaxy S5 (Exynos)
@ 2023-01-20 15:01 ` Mark Brown
0 siblings, 0 replies; 12+ messages in thread
From: Mark Brown @ 2023-01-20 15:01 UTC (permalink / raw)
To: Markuss Broks
Cc: linux-kernel, Krzysztof Kozlowski, Alim Akhtar, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, linux-arm-kernel,
linux-samsung-soc, devicetree
[-- Attachment #1.1: Type: text/plain, Size: 393 bytes --]
On Thu, Jan 19, 2023 at 08:58:44PM +0200, Markuss Broks wrote:
> + buck2_reg: BUCK2 {
> + regulator-name = "VDD_ARM_1V0";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1500000>;
The naming and constraints on this and a number of the other
regulators don't seem consistent - the naming implies a specific
voltage but there's a fairly wide range permitted.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2023-01-20 15:02 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-19 18:58 [PATCH 0/2] Add support for Samsung Galaxy S5 (Exynos) Markuss Broks
2023-01-19 18:58 ` Markuss Broks
2023-01-19 18:58 ` [PATCH 1/2] Documentation: devicetree: bindings: Add compatible " Markuss Broks
2023-01-19 18:58 ` Markuss Broks
2023-01-20 7:25 ` Krzysztof Kozlowski
2023-01-20 7:25 ` Krzysztof Kozlowski
2023-01-19 18:58 ` [PATCH 2/2] arm: dts: Add device-tree " Markuss Broks
2023-01-19 18:58 ` Markuss Broks
2023-01-20 7:35 ` Krzysztof Kozlowski
2023-01-20 7:35 ` Krzysztof Kozlowski
2023-01-20 15:01 ` Mark Brown
2023-01-20 15:01 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.