From: Ravi Gunasekaran <r-gunasekaran@ti.com>
To: <nm@ti.com>, <afd@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<s-vadapalli@ti.com>, <r-gunasekaran@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs
Date: Mon, 23 Jan 2023 15:27:25 +0530 [thread overview]
Message-ID: <20230123095733.31657-1-r-gunasekaran@ti.com> (raw)
The following series of patches add support for the following
on J721S2 common processor board,
- USB
- SerDes
- OSPI
- PCIe
Changes from v1:
* Resolve issues with dt schema reporting
* Minor changes related to consistency on node naming and value
Changes from v2:
* Added PCIe RC + EP enablement patchsets
* Added device-id for j722s2 PCIe host in dt documentation
* Reworked SERDES + WIZ enablement patchset to use properies for clocks
defines versus entire devicetree nodes. Results in cleaner code that
doesn't break dt-schema or the driver functionality.
Changes from v3:
* Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes'
* Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and
send it own series to avoid a dependency that would hold up other patches in this
series
Changes from v4:
* Add my Signed-off-by lines to all patchsets
Changes from v5:
* Removed Cc from commit messages to reduce clutter
* Squashed changes for device tree nodes that get modified latter in the patchset
series
Changes from v6:
* Changes to ti,j721s2-wiz-10g compatible string from ti,am64-wiz-10g but
requires this series to be merged first
Ref: https://lore.kernel.org/linux-arm-kernel/20221122092203.762308-1-mranostay@ti.com/
* Removed unused pcie1_ep based on feedback
* Switch from incorrect "ti,j721e-system-controller", "syscon", "simple-mfd" compatible for
SPI node to "simple-bus"
Changes from v7:
* Fix node names as per bindings document
Aswath Govindraju (7):
arm64: dts: ti: k3-j721s2-main: Add support for USB
arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe
Matt Ranostay (1):
arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node
.../dts/ti/k3-j721s2-common-proc-board.dts | 85 +++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 137 ++++++++++++++++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 39 +++++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 42 ++++++
4 files changed, 303 insertions(+)
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ravi Gunasekaran <r-gunasekaran@ti.com>
To: <nm@ti.com>, <afd@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<s-vadapalli@ti.com>, <r-gunasekaran@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs
Date: Mon, 23 Jan 2023 15:27:25 +0530 [thread overview]
Message-ID: <20230123095733.31657-1-r-gunasekaran@ti.com> (raw)
The following series of patches add support for the following
on J721S2 common processor board,
- USB
- SerDes
- OSPI
- PCIe
Changes from v1:
* Resolve issues with dt schema reporting
* Minor changes related to consistency on node naming and value
Changes from v2:
* Added PCIe RC + EP enablement patchsets
* Added device-id for j722s2 PCIe host in dt documentation
* Reworked SERDES + WIZ enablement patchset to use properies for clocks
defines versus entire devicetree nodes. Results in cleaner code that
doesn't break dt-schema or the driver functionality.
Changes from v3:
* Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes'
* Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and
send it own series to avoid a dependency that would hold up other patches in this
series
Changes from v4:
* Add my Signed-off-by lines to all patchsets
Changes from v5:
* Removed Cc from commit messages to reduce clutter
* Squashed changes for device tree nodes that get modified latter in the patchset
series
Changes from v6:
* Changes to ti,j721s2-wiz-10g compatible string from ti,am64-wiz-10g but
requires this series to be merged first
Ref: https://lore.kernel.org/linux-arm-kernel/20221122092203.762308-1-mranostay@ti.com/
* Removed unused pcie1_ep based on feedback
* Switch from incorrect "ti,j721e-system-controller", "syscon", "simple-mfd" compatible for
SPI node to "simple-bus"
Changes from v7:
* Fix node names as per bindings document
Aswath Govindraju (7):
arm64: dts: ti: k3-j721s2-main: Add support for USB
arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe
Matt Ranostay (1):
arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node
.../dts/ti/k3-j721s2-common-proc-board.dts | 85 +++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 137 ++++++++++++++++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 39 +++++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 42 ++++++
4 files changed, 303 insertions(+)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-01-23 9:58 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-23 9:57 Ravi Gunasekaran [this message]
2023-01-23 9:57 ` [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Ravi Gunasekaran
2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-26 12:24 ` Vignesh Raghavendra
2023-01-26 12:24 ` Vignesh Raghavendra
2023-01-23 9:57 ` [PATCH v8 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Ravi Gunasekaran
2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Ravi Gunasekaran
2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-26 12:26 ` Vignesh Raghavendra
2023-01-26 12:26 ` Vignesh Raghavendra
2023-01-23 9:57 ` [PATCH v8 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Ravi Gunasekaran
2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Ravi Gunasekaran
2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Ravi Gunasekaran
2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Ravi Gunasekaran
2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Ravi Gunasekaran
2023-01-23 9:57 ` Ravi Gunasekaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230123095733.31657-1-r-gunasekaran@ti.com \
--to=r-gunasekaran@ti.com \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=s-vadapalli@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.