All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 00/10] TQMLS1021A support
@ 2023-01-24 11:02 ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Hi,

thanks everyone for the feedback. This is the third round of this series to
add support for the TQMLS1021A using the MBLS1021A mainboard.
The changelog is included in the individual patches.

Best regards,
Alexander

Alexander Stein (7):
  ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
  ARM: dts: ls1021a: add TQMLS1021A flash partition layout
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
  ARM: multi_v7_defconfig: Add options to support TQMLS102xA series

Matthias Schiffer (1):
  dt-bindings: arm: fsl: add TQ-Systems LS1021A board

Nicolas Saenz Julienne (2):
  kbuild: Add config fragment merge functionality
  ARM: add multi_v7_lpae_defconfig

 .../devicetree/bindings/arm/fsl.yaml          |  10 +
 arch/arm/Makefile                             |   6 +
 arch/arm/boot/dts/Makefile                    |  12 +
 ...1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts |  55 +++
 ...1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts |  55 +++
 .../ls1021a-tqmls1021a-mbls1021a-hdmi.dtso    |  36 ++
 ...tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso |  56 +++
 .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 406 ++++++++++++++++++
 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi     | 112 +++++
 arch/arm/configs/lpae.config                  |   2 +
 arch/arm/configs/multi_v7_defconfig           |  13 +
 arch/powerpc/Makefile                         |  12 +-
 scripts/Makefile.defconf                      |  15 +
 13 files changed, 779 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
 create mode 100644 arch/arm/configs/lpae.config
 create mode 100644 scripts/Makefile.defconf

-- 
2.34.1


^ permalink raw reply	[flat|nested] 38+ messages in thread
* [PATCH v3 00/10] TQMLS1021A support
@ 2023-01-24 11:02 ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc, linuxppc-dev,
	linux-arm-kernel

Hi,

thanks everyone for the feedback. This is the third round of this series to
add support for the TQMLS1021A using the MBLS1021A mainboard.
The changelog is included in the individual patches.

Best regards,
Alexander

Alexander Stein (7):
  ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
  ARM: dts: ls1021a: add TQMLS1021A flash partition layout
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
  ARM: multi_v7_defconfig: Add options to support TQMLS102xA series

Matthias Schiffer (1):
  dt-bindings: arm: fsl: add TQ-Systems LS1021A board

Nicolas Saenz Julienne (2):
  kbuild: Add config fragment merge functionality
  ARM: add multi_v7_lpae_defconfig

 .../devicetree/bindings/arm/fsl.yaml          |  10 +
 arch/arm/Makefile                             |   6 +
 arch/arm/boot/dts/Makefile                    |  12 +
 ...1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts |  55 +++
 ...1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts |  55 +++
 .../ls1021a-tqmls1021a-mbls1021a-hdmi.dtso    |  36 ++
 ...tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso |  56 +++
 .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 406 ++++++++++++++++++
 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi     | 112 +++++
 arch/arm/configs/lpae.config                  |   2 +
 arch/arm/configs/multi_v7_defconfig           |  13 +
 arch/powerpc/Makefile                         |  12 +-
 scripts/Makefile.defconf                      |  15 +
 13 files changed, 779 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
 create mode 100644 arch/arm/configs/lpae.config
 create mode 100644 scripts/Makefile.defconf

-- 
2.34.1


^ permalink raw reply	[flat|nested] 38+ messages in thread
* [PATCH v3 00/10] TQMLS1021A support
@ 2023-01-24 11:02 ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Hi,

thanks everyone for the feedback. This is the third round of this series to
add support for the TQMLS1021A using the MBLS1021A mainboard.
The changelog is included in the individual patches.

Best regards,
Alexander

Alexander Stein (7):
  ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
  ARM: dts: ls1021a: add TQMLS1021A flash partition layout
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
  ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
  ARM: multi_v7_defconfig: Add options to support TQMLS102xA series

Matthias Schiffer (1):
  dt-bindings: arm: fsl: add TQ-Systems LS1021A board

Nicolas Saenz Julienne (2):
  kbuild: Add config fragment merge functionality
  ARM: add multi_v7_lpae_defconfig

 .../devicetree/bindings/arm/fsl.yaml          |  10 +
 arch/arm/Makefile                             |   6 +
 arch/arm/boot/dts/Makefile                    |  12 +
 ...1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts |  55 +++
 ...1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts |  55 +++
 .../ls1021a-tqmls1021a-mbls1021a-hdmi.dtso    |  36 ++
 ...tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso |  56 +++
 .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 406 ++++++++++++++++++
 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi     | 112 +++++
 arch/arm/configs/lpae.config                  |   2 +
 arch/arm/configs/multi_v7_defconfig           |  13 +
 arch/powerpc/Makefile                         |  12 +-
 scripts/Makefile.defconf                      |  15 +
 13 files changed, 779 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
 create mode 100644 arch/arm/configs/lpae.config
 create mode 100644 scripts/Makefile.defconf

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 38+ messages in thread
* [PATCH v3 01/10] dt-bindings: arm: fsl: add TQ-Systems LS1021A board
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Matthias Schiffer, soc, devicetree, linux-arm-kernel,
	linuxppc-dev, linux-kbuild, Alexander Stein, Krzysztof Kozlowski

From: Matthias Schiffer <matthias.schiffer@tq-group.com>

TQMLS102xA is a SOM family using NXP LS1021A CPU family.
MBLS102xA is an evaluation mainboard for this SOM.

Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
* Added Krzysztof's A-b

 Documentation/devicetree/bindings/arm/fsl.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 3ba354578e8f9..489d350c3bbbe 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1164,6 +1164,16 @@ properties:
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
+      - description:
+          TQ-Systems TQMLS102xA is a series of socketable SOM featuring
+          LS102x system-on-chip variants. MBLS102xA mainboard can be used as
+          starterkit.
+        items:
+          - enum:
+              - tq,ls1021a-tqmls1021a-mbls102xa
+          - const: tq,ls1021a-tqmls1021a
+          - const: fsl,ls1021a
+
       - description: LS1028A based Boards
         items:
           - enum:
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 01/10] dt-bindings: arm: fsl: add TQ-Systems LS1021A board
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, Krzysztof Kozlowski,
	Matthias Schiffer, soc, linuxppc-dev, linux-arm-kernel

From: Matthias Schiffer <matthias.schiffer@tq-group.com>

TQMLS102xA is a SOM family using NXP LS1021A CPU family.
MBLS102xA is an evaluation mainboard for this SOM.

Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
* Added Krzysztof's A-b

 Documentation/devicetree/bindings/arm/fsl.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 3ba354578e8f9..489d350c3bbbe 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1164,6 +1164,16 @@ properties:
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
+      - description:
+          TQ-Systems TQMLS102xA is a series of socketable SOM featuring
+          LS102x system-on-chip variants. MBLS102xA mainboard can be used as
+          starterkit.
+        items:
+          - enum:
+              - tq,ls1021a-tqmls1021a-mbls102xa
+          - const: tq,ls1021a-tqmls1021a
+          - const: fsl,ls1021a
+
       - description: LS1028A based Boards
         items:
           - enum:
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 01/10] dt-bindings: arm: fsl: add TQ-Systems LS1021A board
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Matthias Schiffer, soc, devicetree, linux-arm-kernel,
	linuxppc-dev, linux-kbuild, Alexander Stein, Krzysztof Kozlowski

From: Matthias Schiffer <matthias.schiffer@tq-group.com>

TQMLS102xA is a SOM family using NXP LS1021A CPU family.
MBLS102xA is an evaluation mainboard for this SOM.

Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
* Added Krzysztof's A-b

 Documentation/devicetree/bindings/arm/fsl.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 3ba354578e8f9..489d350c3bbbe 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1164,6 +1164,16 @@ properties:
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
+      - description:
+          TQ-Systems TQMLS102xA is a series of socketable SOM featuring
+          LS102x system-on-chip variants. MBLS102xA mainboard can be used as
+          starterkit.
+        items:
+          - enum:
+              - tq,ls1021a-tqmls1021a-mbls102xa
+          - const: tq,ls1021a-tqmls1021a
+          - const: fsl,ls1021a
+
       - description: LS1028A based Boards
         items:
           - enum:
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 02/10] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* Remove unnecessary status = "okay"
* Remove underscore from node names
* Move reg direct below compatiblefor i2c devices
* Remove i2c device nodes without software support
  Add a comment about existance for the device though

 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 406 ++++++++++++++++++
 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi     |  81 ++++
 3 files changed, 488 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 53e9c96136519..758b6f2f14e7d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -802,6 +802,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-iot.dtb \
 	ls1021a-moxa-uc-8410a.dtb \
 	ls1021a-qds.dtb \
+	ls1021a-tqmls1021a-mbls1021a.dtb \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 dtb-$(CONFIG_SOC_VF610) += \
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
new file mode 100644
index 0000000000000..aa8b605344655
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "ls1021a-tqmls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM on MBLS102xA";
+	compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	audio_mclk: audio-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	backlight_dcu: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&pca9530 0 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-1 {
+			label = "S6";
+			linux,code = <BTN_0>;
+			gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		btn2: switch-2 {
+			label = "S7";
+			linux,code = <BTN_1>;
+			gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "S8";
+			linux,code = <BTN_2>;
+			gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		power-supply = <&reg_3p3v>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_out: endpoint {};
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hdmi_out: hdmi {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-i2c-bus = <&i2c0>;
+		status = "disabled";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&sii9022a_out>;
+			};
+		};
+	};
+
+	display: panel {
+		backlight = <&backlight_dcu>;
+		enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "ls1021a-mbls1021a-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+	};
+
+};
+
+&can0 {
+	status = "okay";
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can1 {
+	status = "okay";
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+};
+
+&enet0 {
+	phy-handle = <&rgmii_phy0c>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy03>;
+	phy-mode = "sgmii";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy04>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&audio_mclk>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_3p3v>;
+		iov-supply = <&reg_3p3v>;
+	};
+
+	pca9554_0: gpio-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "BUTTON0", "BUTTON1",
+				  "BUTTON2", "EMMC_SEL",
+				  "DIP2", "DIP3",
+				  "EXT_TOUCH_INT", "GPIO_1";
+	};
+
+	pca9554_1: gpio-expander@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#",
+				  "MPCIE_WAKE#", "LCD_BLT_EN",
+				  "LCD_PWR_EN", "EC1_PHY_PWDN",
+				  "EC3_PHY_PWDN", "SGMII_PHY_PWDN";
+	};
+
+	pca9554_2: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&extirq>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "MUX_SEL0", "MUX_SEL1",
+				  "MUX_SEL2", "MUX_SEL3",
+				  "V95", "V96", "V97", "V98";
+	};
+
+	sii9022a: hdmi-transmitter@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		iovcc-supply = <&reg_3p3v>;
+		cvcc12-supply = <&reg_1p2v>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022a_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022a_out: endpoint {
+					remote-endpoint = <&hdmi_in>;
+				};
+			};
+		};
+	};
+
+	stmpe811: touchscreen@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_3p3v>;
+		vio-supply = <&reg_3p3v>;
+
+		gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO 5-7 used for touch */
+			st,norequest-mask = <0xf0>;
+			gpio-line-names = "GPIO_ADC_I2C1_1",
+					  "GPIO_ADC_I2C1_2",
+					  "GPIO_ADC_I2C1_3",
+					  "GPIO_ADC_I2C1_4";
+		};
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			status = "disabled";
+		};
+	};
+
+	pca9530: leds@60 {
+		compatible = "nxp,pca9530";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PWM_0", "PWM_1";
+
+		led-0 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+
+		led-1 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+	linux,rs485-enabled-at-boot-time;
+};
+
+&mdio0 {
+	sgmii_phy03: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x03>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	rgmii_phy04: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x04>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	rgmii_phy0c: ethernet-phy@c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0c>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	/delete-property/ dma-coherent;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3 {
+	/*
+	 * Although DR connector, VBUS is always driven, so
+	 * restrict to host mode.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
new file mode 100644
index 0000000000000..24ad4a76fe597
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "ls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM";
+	compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	reg_3p3v_som: regulator-3p3v-som {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_SOM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&esdhc {
+	compatible = "fsl,esdhc", "fsl,ls1021a-esdhc";
+	/* e-MMC over 8 data lines */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* MC34VR500 DC/DC regulator at 0x8 */
+	/* On-board PMC at 0x11 */
+
+	sa56004: temperature-sensor@4c {
+		compatible = "nxp,sa56004";
+		reg = <0x4c>;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+
+	rtc0: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	m24c64_54: eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		read-only;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+};
+
+&mdio0 {
+	tbi1: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&scfg {
+	reg = <0x0 0x1570000 0x0 0x0e00>;
+};
+
+&qspi {
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 02/10] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* Remove unnecessary status = "okay"
* Remove underscore from node names
* Move reg direct below compatiblefor i2c devices
* Remove i2c device nodes without software support
  Add a comment about existance for the device though

 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 406 ++++++++++++++++++
 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi     |  81 ++++
 3 files changed, 488 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 53e9c96136519..758b6f2f14e7d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -802,6 +802,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-iot.dtb \
 	ls1021a-moxa-uc-8410a.dtb \
 	ls1021a-qds.dtb \
+	ls1021a-tqmls1021a-mbls1021a.dtb \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 dtb-$(CONFIG_SOC_VF610) += \
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
new file mode 100644
index 0000000000000..aa8b605344655
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "ls1021a-tqmls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM on MBLS102xA";
+	compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	audio_mclk: audio-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	backlight_dcu: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&pca9530 0 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-1 {
+			label = "S6";
+			linux,code = <BTN_0>;
+			gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		btn2: switch-2 {
+			label = "S7";
+			linux,code = <BTN_1>;
+			gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "S8";
+			linux,code = <BTN_2>;
+			gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		power-supply = <&reg_3p3v>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_out: endpoint {};
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hdmi_out: hdmi {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-i2c-bus = <&i2c0>;
+		status = "disabled";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&sii9022a_out>;
+			};
+		};
+	};
+
+	display: panel {
+		backlight = <&backlight_dcu>;
+		enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "ls1021a-mbls1021a-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+	};
+
+};
+
+&can0 {
+	status = "okay";
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can1 {
+	status = "okay";
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+};
+
+&enet0 {
+	phy-handle = <&rgmii_phy0c>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy03>;
+	phy-mode = "sgmii";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy04>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&audio_mclk>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_3p3v>;
+		iov-supply = <&reg_3p3v>;
+	};
+
+	pca9554_0: gpio-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "BUTTON0", "BUTTON1",
+				  "BUTTON2", "EMMC_SEL",
+				  "DIP2", "DIP3",
+				  "EXT_TOUCH_INT", "GPIO_1";
+	};
+
+	pca9554_1: gpio-expander@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#",
+				  "MPCIE_WAKE#", "LCD_BLT_EN",
+				  "LCD_PWR_EN", "EC1_PHY_PWDN",
+				  "EC3_PHY_PWDN", "SGMII_PHY_PWDN";
+	};
+
+	pca9554_2: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&extirq>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "MUX_SEL0", "MUX_SEL1",
+				  "MUX_SEL2", "MUX_SEL3",
+				  "V95", "V96", "V97", "V98";
+	};
+
+	sii9022a: hdmi-transmitter@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		iovcc-supply = <&reg_3p3v>;
+		cvcc12-supply = <&reg_1p2v>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022a_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022a_out: endpoint {
+					remote-endpoint = <&hdmi_in>;
+				};
+			};
+		};
+	};
+
+	stmpe811: touchscreen@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_3p3v>;
+		vio-supply = <&reg_3p3v>;
+
+		gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO 5-7 used for touch */
+			st,norequest-mask = <0xf0>;
+			gpio-line-names = "GPIO_ADC_I2C1_1",
+					  "GPIO_ADC_I2C1_2",
+					  "GPIO_ADC_I2C1_3",
+					  "GPIO_ADC_I2C1_4";
+		};
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			status = "disabled";
+		};
+	};
+
+	pca9530: leds@60 {
+		compatible = "nxp,pca9530";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PWM_0", "PWM_1";
+
+		led-0 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+
+		led-1 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+	linux,rs485-enabled-at-boot-time;
+};
+
+&mdio0 {
+	sgmii_phy03: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x03>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	rgmii_phy04: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x04>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	rgmii_phy0c: ethernet-phy@c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0c>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	/delete-property/ dma-coherent;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3 {
+	/*
+	 * Although DR connector, VBUS is always driven, so
+	 * restrict to host mode.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
new file mode 100644
index 0000000000000..24ad4a76fe597
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "ls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM";
+	compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	reg_3p3v_som: regulator-3p3v-som {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_SOM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&esdhc {
+	compatible = "fsl,esdhc", "fsl,ls1021a-esdhc";
+	/* e-MMC over 8 data lines */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* MC34VR500 DC/DC regulator at 0x8 */
+	/* On-board PMC at 0x11 */
+
+	sa56004: temperature-sensor@4c {
+		compatible = "nxp,sa56004";
+		reg = <0x4c>;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+
+	rtc0: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	m24c64_54: eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		read-only;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+};
+
+&mdio0 {
+	tbi1: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&scfg {
+	reg = <0x0 0x1570000 0x0 0x0e00>;
+};
+
+&qspi {
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 02/10] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc, linuxppc-dev,
	linux-arm-kernel

Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* Remove unnecessary status = "okay"
* Remove underscore from node names
* Move reg direct below compatiblefor i2c devices
* Remove i2c device nodes without software support
  Add a comment about existance for the device though

 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 406 ++++++++++++++++++
 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi     |  81 ++++
 3 files changed, 488 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 53e9c96136519..758b6f2f14e7d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -802,6 +802,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-iot.dtb \
 	ls1021a-moxa-uc-8410a.dtb \
 	ls1021a-qds.dtb \
+	ls1021a-tqmls1021a-mbls1021a.dtb \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 dtb-$(CONFIG_SOC_VF610) += \
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
new file mode 100644
index 0000000000000..aa8b605344655
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "ls1021a-tqmls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM on MBLS102xA";
+	compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	audio_mclk: audio-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	backlight_dcu: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&pca9530 0 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-1 {
+			label = "S6";
+			linux,code = <BTN_0>;
+			gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		btn2: switch-2 {
+			label = "S7";
+			linux,code = <BTN_1>;
+			gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "S8";
+			linux,code = <BTN_2>;
+			gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		power-supply = <&reg_3p3v>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_out: endpoint {};
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hdmi_out: hdmi {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-i2c-bus = <&i2c0>;
+		status = "disabled";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&sii9022a_out>;
+			};
+		};
+	};
+
+	display: panel {
+		backlight = <&backlight_dcu>;
+		enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "ls1021a-mbls1021a-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+	};
+
+};
+
+&can0 {
+	status = "okay";
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can1 {
+	status = "okay";
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+};
+
+&enet0 {
+	phy-handle = <&rgmii_phy0c>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy03>;
+	phy-mode = "sgmii";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy04>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&audio_mclk>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_3p3v>;
+		iov-supply = <&reg_3p3v>;
+	};
+
+	pca9554_0: gpio-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "BUTTON0", "BUTTON1",
+				  "BUTTON2", "EMMC_SEL",
+				  "DIP2", "DIP3",
+				  "EXT_TOUCH_INT", "GPIO_1";
+	};
+
+	pca9554_1: gpio-expander@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#",
+				  "MPCIE_WAKE#", "LCD_BLT_EN",
+				  "LCD_PWR_EN", "EC1_PHY_PWDN",
+				  "EC3_PHY_PWDN", "SGMII_PHY_PWDN";
+	};
+
+	pca9554_2: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&extirq>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "MUX_SEL0", "MUX_SEL1",
+				  "MUX_SEL2", "MUX_SEL3",
+				  "V95", "V96", "V97", "V98";
+	};
+
+	sii9022a: hdmi-transmitter@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		iovcc-supply = <&reg_3p3v>;
+		cvcc12-supply = <&reg_1p2v>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022a_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022a_out: endpoint {
+					remote-endpoint = <&hdmi_in>;
+				};
+			};
+		};
+	};
+
+	stmpe811: touchscreen@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_3p3v>;
+		vio-supply = <&reg_3p3v>;
+
+		gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO 5-7 used for touch */
+			st,norequest-mask = <0xf0>;
+			gpio-line-names = "GPIO_ADC_I2C1_1",
+					  "GPIO_ADC_I2C1_2",
+					  "GPIO_ADC_I2C1_3",
+					  "GPIO_ADC_I2C1_4";
+		};
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			status = "disabled";
+		};
+	};
+
+	pca9530: leds@60 {
+		compatible = "nxp,pca9530";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PWM_0", "PWM_1";
+
+		led-0 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+
+		led-1 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+	linux,rs485-enabled-at-boot-time;
+};
+
+&mdio0 {
+	sgmii_phy03: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x03>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	rgmii_phy04: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x04>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	rgmii_phy0c: ethernet-phy@c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0c>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	/delete-property/ dma-coherent;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3 {
+	/*
+	 * Although DR connector, VBUS is always driven, so
+	 * restrict to host mode.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
new file mode 100644
index 0000000000000..24ad4a76fe597
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "ls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM";
+	compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	reg_3p3v_som: regulator-3p3v-som {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_SOM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&esdhc {
+	compatible = "fsl,esdhc", "fsl,ls1021a-esdhc";
+	/* e-MMC over 8 data lines */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* MC34VR500 DC/DC regulator at 0x8 */
+	/* On-board PMC at 0x11 */
+
+	sa56004: temperature-sensor@4c {
+		compatible = "nxp,sa56004";
+		reg = <0x4c>;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+
+	rtc0: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	m24c64_54: eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		read-only;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+};
+
+&mdio0 {
+	tbi1: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&scfg {
+	reg = <0x0 0x1570000 0x0 0x0e00>;
+};
+
+&qspi {
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 03/10] ARM: dts: ls1021a: add TQMLS1021A flash partition layout
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

The bootloader does not add the partitions into DT, so add them manually
here.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi | 31 +++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
index 24ad4a76fe597..ea6734253ba88 100644
--- a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
@@ -77,5 +77,36 @@ qflash0: flash@0 {
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot@0 {
+				label = "U-Boot-PBL";
+				reg = <0x0 0xe0000>;
+			};
+
+			env@e0000 {
+				label = "U-Boot Environment";
+				reg = <0xe0000 0x10000>;
+			};
+
+			dtb@f0000 {
+				label = "DTB";
+				reg = <0xf0000 0x10000>;
+			};
+
+			linux@100000 {
+				label = "Linux";
+				reg = <0x100000 0x700000>;
+			};
+
+			rootfs@800000 {
+				label = "RootFS";
+				reg = <0x800000 0x3800000>;
+			};
+		};
 	};
 };
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 03/10] ARM: dts: ls1021a: add TQMLS1021A flash partition layout
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc, linuxppc-dev,
	linux-arm-kernel

The bootloader does not add the partitions into DT, so add them manually
here.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi | 31 +++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
index 24ad4a76fe597..ea6734253ba88 100644
--- a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
@@ -77,5 +77,36 @@ qflash0: flash@0 {
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot@0 {
+				label = "U-Boot-PBL";
+				reg = <0x0 0xe0000>;
+			};
+
+			env@e0000 {
+				label = "U-Boot Environment";
+				reg = <0xe0000 0x10000>;
+			};
+
+			dtb@f0000 {
+				label = "DTB";
+				reg = <0xf0000 0x10000>;
+			};
+
+			linux@100000 {
+				label = "Linux";
+				reg = <0x100000 0x700000>;
+			};
+
+			rootfs@800000 {
+				label = "RootFS";
+				reg = <0x800000 0x3800000>;
+			};
+		};
 	};
 };
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 03/10] ARM: dts: ls1021a: add TQMLS1021A flash partition layout
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

The bootloader does not add the partitions into DT, so add them manually
here.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi | 31 +++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
index 24ad4a76fe597..ea6734253ba88 100644
--- a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
@@ -77,5 +77,36 @@ qflash0: flash@0 {
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot@0 {
+				label = "U-Boot-PBL";
+				reg = <0x0 0xe0000>;
+			};
+
+			env@e0000 {
+				label = "U-Boot Environment";
+				reg = <0xe0000 0x10000>;
+			};
+
+			dtb@f0000 {
+				label = "DTB";
+				reg = <0xf0000 0x10000>;
+			};
+
+			linux@100000 {
+				label = "Linux";
+				reg = <0x100000 0x700000>;
+			};
+
+			rootfs@800000 {
+				label = "RootFS";
+				reg = <0x800000 0x3800000>;
+			};
+		};
 	};
 };
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 04/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree overlay for LVDS display usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  5 ++
 ...tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso | 56 +++++++++++++++++++
 2 files changed, 61 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 758b6f2f14e7d..626f7172c74e9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -805,6 +805,11 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tqmls1021a-mbls1021a.dtb \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
+
+ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
+
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
+
 dtb-$(CONFIG_SOC_VF610) += \
 	vf500-colibri-eval-v3.dtb \
 	vf610-bk4.dtb \
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
new file mode 100644
index 0000000000000..252ef982dd862
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+
+		dcu_out: endpoint {
+			remote-endpoint = <&lvds_encoder_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&lvds_encoder_out>;
+		};
+	};
+};
+
+&lvds_encoder {
+	status = "okay";
+
+	ports {
+		port@0 {
+			lvds_encoder_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+
+		port@1 {
+			lvds_encoder_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 04/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc, linuxppc-dev,
	linux-arm-kernel

Add device tree overlay for LVDS display usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  5 ++
 ...tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso | 56 +++++++++++++++++++
 2 files changed, 61 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 758b6f2f14e7d..626f7172c74e9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -805,6 +805,11 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tqmls1021a-mbls1021a.dtb \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
+
+ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
+
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
+
 dtb-$(CONFIG_SOC_VF610) += \
 	vf500-colibri-eval-v3.dtb \
 	vf610-bk4.dtb \
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
new file mode 100644
index 0000000000000..252ef982dd862
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+
+		dcu_out: endpoint {
+			remote-endpoint = <&lvds_encoder_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&lvds_encoder_out>;
+		};
+	};
+};
+
+&lvds_encoder {
+	status = "okay";
+
+	ports {
+		port@0 {
+			lvds_encoder_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+
+		port@1 {
+			lvds_encoder_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 04/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree overlay for LVDS display usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  5 ++
 ...tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso | 56 +++++++++++++++++++
 2 files changed, 61 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 758b6f2f14e7d..626f7172c74e9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -805,6 +805,11 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tqmls1021a-mbls1021a.dtb \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
+
+ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
+
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
+
 dtb-$(CONFIG_SOC_VF610) += \
 	vf500-colibri-eval-v3.dtb \
 	vf610-bk4.dtb \
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
new file mode 100644
index 0000000000000..252ef982dd862
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+
+		dcu_out: endpoint {
+			remote-endpoint = <&lvds_encoder_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&lvds_encoder_out>;
+		};
+	};
+};
+
+&lvds_encoder {
+	status = "okay";
+
+	ports {
+		port@0 {
+			lvds_encoder_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+
+		port@1 {
+			lvds_encoder_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 05/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree overlay for HDMI usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  2 ++
 .../ls1021a-tqmls1021a-mbls1021a-hdmi.dtso    | 36 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 626f7172c74e9..f9f75c5325808 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,8 +806,10 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 
+ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
 ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
 
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
 
 dtb-$(CONFIG_SOC_VF610) += \
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
new file mode 100644
index 0000000000000..f5ca22643c08e
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&sii9022a_in>;
+		};
+	};
+};
+
+&hdmi_out {
+	status = "okay";
+};
+
+&sii9022a {
+	status = "okay";
+
+	ports {
+		port@0 {
+			sii9022a_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 05/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree overlay for HDMI usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  2 ++
 .../ls1021a-tqmls1021a-mbls1021a-hdmi.dtso    | 36 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 626f7172c74e9..f9f75c5325808 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,8 +806,10 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 
+ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
 ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
 
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
 
 dtb-$(CONFIG_SOC_VF610) += \
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
new file mode 100644
index 0000000000000..f5ca22643c08e
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&sii9022a_in>;
+		};
+	};
+};
+
+&hdmi_out {
+	status = "okay";
+};
+
+&sii9022a {
+	status = "okay";
+
+	ports {
+		port@0 {
+			sii9022a_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+	};
+};
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 05/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc, linuxppc-dev,
	linux-arm-kernel

Add device tree overlay for HDMI usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  2 ++
 .../ls1021a-tqmls1021a-mbls1021a-hdmi.dtso    | 36 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 626f7172c74e9..f9f75c5325808 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,8 +806,10 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 
+ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
 ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
 
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
 
 dtb-$(CONFIG_SOC_VF610) += \
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
new file mode 100644
index 0000000000000..f5ca22643c08e
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&sii9022a_in>;
+		};
+	};
+};
+
+&hdmi_out {
+	status = "okay";
+};
+
+&sii9022a {
+	status = "okay";
+
+	ports {
+		port@0 {
+			sii9022a_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 06/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree overlay for LVDS display usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  2 +
 ...1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts | 55 +++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f9f75c5325808..64cc0f3f6efb0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,9 +806,11 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 
+ls1021a-tqmls1021a-mbls1021a-cdtech-dc44-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtbo
 ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
 ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
 
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
 
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts
new file mode 100644
index 0000000000000..ddc71bc597295
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070swv29hg-dc44";
+	status = "okay";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&dcu_out>;
+		};
+	};
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 06/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc, linuxppc-dev,
	linux-arm-kernel

Add device tree overlay for LVDS display usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  2 +
 ...1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts | 55 +++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f9f75c5325808..64cc0f3f6efb0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,9 +806,11 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 
+ls1021a-tqmls1021a-mbls1021a-cdtech-dc44-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtbo
 ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
 ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
 
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
 
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts
new file mode 100644
index 0000000000000..ddc71bc597295
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070swv29hg-dc44";
+	status = "okay";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&dcu_out>;
+		};
+	};
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 06/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree overlay for LVDS display usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  2 +
 ...1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts | 55 +++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f9f75c5325808..64cc0f3f6efb0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,9 +806,11 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 
+ls1021a-tqmls1021a-mbls1021a-cdtech-dc44-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtbo
 ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
 ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
 
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
 
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts
new file mode 100644
index 0000000000000..ddc71bc597295
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070swv29hg-dc44";
+	status = "okay";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&dcu_out>;
+		};
+	};
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 07/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree overlay for LVDS display usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  2 +
 ...1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts | 55 +++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 64cc0f3f6efb0..d68100144ae4f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,10 +806,12 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 
+ls1021a-tqmls1021a-mbls1021a-cdtech-fc21-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dtbo
 ls1021a-tqmls1021a-mbls1021a-cdtech-dc44-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtbo
 ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
 ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
 
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts
new file mode 100644
index 0000000000000..4bd10d0e17b90
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070pws19hp-fc21";
+	status = "okay";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&dcu_out>;
+		};
+	};
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		gain = <20>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 07/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Add device tree overlay for LVDS display usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  2 +
 ...1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts | 55 +++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 64cc0f3f6efb0..d68100144ae4f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,10 +806,12 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 
+ls1021a-tqmls1021a-mbls1021a-cdtech-fc21-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dtbo
 ls1021a-tqmls1021a-mbls1021a-cdtech-dc44-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtbo
 ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
 ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
 
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts
new file mode 100644
index 0000000000000..4bd10d0e17b90
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070pws19hp-fc21";
+	status = "okay";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&dcu_out>;
+		};
+	};
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		gain = <20>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 07/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc, linuxppc-dev,
	linux-arm-kernel

Add device tree overlay for LVDS display usage.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* None

 arch/arm/boot/dts/Makefile                    |  2 +
 ...1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts | 55 +++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 64cc0f3f6efb0..d68100144ae4f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,10 +806,12 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 
+ls1021a-tqmls1021a-mbls1021a-cdtech-fc21-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dtbo
 ls1021a-tqmls1021a-mbls1021a-cdtech-dc44-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtbo
 ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
 ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs := ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
 
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-cdtech-dc44.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
 dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts
new file mode 100644
index 0000000000000..4bd10d0e17b90
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a-cdtech-fc21.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070pws19hp-fc21";
+	status = "okay";
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&dcu_out>;
+		};
+	};
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		gain = <20>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 08/10] ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Enable drivers used on TQMLS102xA + MBLS1021A.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* Changed symbols to 'm' where possible

 arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ee184eb37adcf..92628a160cfb3 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -191,6 +191,7 @@ CONFIG_PCI_TEGRA=y
 CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
 CONFIG_PCI_DRA7XX_EP=y
+CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
 CONFIG_PCI_EPF_TEST=m
@@ -249,6 +250,7 @@ CONFIG_AHCI_ST=y
 CONFIG_AHCI_IMX=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
+CONFIG_AHCI_QORIQ=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_RCAR=y
@@ -329,6 +331,7 @@ CONFIG_TOUCHSCREEN_ADC=m
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_ELAN=m
 CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -483,6 +486,7 @@ CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_EM=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_SYSCON=y
@@ -493,6 +497,7 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_TWL4030=y
@@ -533,6 +538,7 @@ CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y
+CONFIG_QORIQ_THERMAL=m
 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
@@ -821,6 +827,8 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_SGTL5000=m
 CONFIG_SND_SOC_STI_SAS=m
+CONFIG_SND_SOC_TLV320AIC32X4=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_USB=y
@@ -830,6 +838,7 @@ CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_XHCI_TEGRA=m
 CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=m
 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_EXYNOS=m
 CONFIG_USB_EHCI_MV=m
@@ -933,6 +942,8 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_CPCAP=m
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_PCA9532_GPIO=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_MAX8997=m
@@ -949,6 +960,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_EDAC=y
+CONFIG_EDAC_LAYERSCAPE=y
 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
@@ -962,6 +974,7 @@ CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_PCF85063=m
 CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_TWL4030=y
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 08/10] ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc, linuxppc-dev,
	linux-arm-kernel

Enable drivers used on TQMLS102xA + MBLS1021A.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* Changed symbols to 'm' where possible

 arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ee184eb37adcf..92628a160cfb3 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -191,6 +191,7 @@ CONFIG_PCI_TEGRA=y
 CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
 CONFIG_PCI_DRA7XX_EP=y
+CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
 CONFIG_PCI_EPF_TEST=m
@@ -249,6 +250,7 @@ CONFIG_AHCI_ST=y
 CONFIG_AHCI_IMX=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
+CONFIG_AHCI_QORIQ=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_RCAR=y
@@ -329,6 +331,7 @@ CONFIG_TOUCHSCREEN_ADC=m
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_ELAN=m
 CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -483,6 +486,7 @@ CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_EM=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_SYSCON=y
@@ -493,6 +497,7 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_TWL4030=y
@@ -533,6 +538,7 @@ CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y
+CONFIG_QORIQ_THERMAL=m
 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
@@ -821,6 +827,8 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_SGTL5000=m
 CONFIG_SND_SOC_STI_SAS=m
+CONFIG_SND_SOC_TLV320AIC32X4=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_USB=y
@@ -830,6 +838,7 @@ CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_XHCI_TEGRA=m
 CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=m
 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_EXYNOS=m
 CONFIG_USB_EHCI_MV=m
@@ -933,6 +942,8 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_CPCAP=m
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_PCA9532_GPIO=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_MAX8997=m
@@ -949,6 +960,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_EDAC=y
+CONFIG_EDAC_LAYERSCAPE=y
 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
@@ -962,6 +974,7 @@ CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_PCF85063=m
 CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_TWL4030=y
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 08/10] ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Alexander Stein, soc, devicetree, linux-arm-kernel, linuxppc-dev,
	linux-kbuild

Enable drivers used on TQMLS102xA + MBLS1021A.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* None

Changes in v2:
* Changed symbols to 'm' where possible

 arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ee184eb37adcf..92628a160cfb3 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -191,6 +191,7 @@ CONFIG_PCI_TEGRA=y
 CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
 CONFIG_PCI_DRA7XX_EP=y
+CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
 CONFIG_PCI_EPF_TEST=m
@@ -249,6 +250,7 @@ CONFIG_AHCI_ST=y
 CONFIG_AHCI_IMX=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
+CONFIG_AHCI_QORIQ=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_RCAR=y
@@ -329,6 +331,7 @@ CONFIG_TOUCHSCREEN_ADC=m
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_ELAN=m
 CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -483,6 +486,7 @@ CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_EM=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_SYSCON=y
@@ -493,6 +497,7 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_TWL4030=y
@@ -533,6 +538,7 @@ CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y
+CONFIG_QORIQ_THERMAL=m
 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
@@ -821,6 +827,8 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_SGTL5000=m
 CONFIG_SND_SOC_STI_SAS=m
+CONFIG_SND_SOC_TLV320AIC32X4=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_USB=y
@@ -830,6 +838,7 @@ CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_XHCI_TEGRA=m
 CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=m
 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_EXYNOS=m
 CONFIG_USB_EHCI_MV=m
@@ -933,6 +942,8 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_CPCAP=m
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_PCA9532_GPIO=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_MAX8997=m
@@ -949,6 +960,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_EDAC=y
+CONFIG_EDAC_LAYERSCAPE=y
 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
@@ -962,6 +974,7 @@ CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_PCF85063=m
 CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_TWL4030=y
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 09/10] kbuild: Add config fragment merge functionality
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Nicolas Saenz Julienne, soc, devicetree, linux-arm-kernel,
	linuxppc-dev, linux-kbuild, Alexander Stein

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

So far this function was only used locally in powerpc, some other
architectures might benefit from it. Move it into
scripts/Makefile.defconf.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
Changes in v3:
* Added Arnd's A-b

 arch/powerpc/Makefile    | 12 +-----------
 scripts/Makefile.defconf | 15 +++++++++++++++
 2 files changed, 16 insertions(+), 11 deletions(-)
 create mode 100644 scripts/Makefile.defconf

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 4fd630efe39d3..6ec5b9f7b7caa 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -253,17 +253,7 @@ PHONY += bootwrapper_install
 bootwrapper_install:
 	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
-# Used to create 'merged defconfigs'
-# To use it $(call) it with the first argument as the base defconfig
-# and the second argument as a space separated list of .config files to merge,
-# without the .config suffix.
-define merge_into_defconfig
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
-		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/$(1) \
-		$(foreach config,$(2),$(srctree)/arch/$(ARCH)/configs/$(config).config)
-	+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
-endef
-
+include $(srctree)/scripts/Makefile.defconf
 PHONY += pseries_le_defconfig
 pseries_le_defconfig:
 	$(call merge_into_defconfig,pseries_defconfig,le)
diff --git a/scripts/Makefile.defconf b/scripts/Makefile.defconf
new file mode 100644
index 0000000000000..ab332f7534f51
--- /dev/null
+++ b/scripts/Makefile.defconf
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+# Configuration heplers
+
+# Creates 'merged defconfigs'
+# ---------------------------------------------------------------------------
+# Usage:
+#   $(call merge_into_defconfig,base_config,config_fragment1 config_fragment2 ...)
+#
+# Input config fragments without '.config' suffix
+define merge_into_defconfig
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/$(1) \
+		$(foreach config,$(2),$(srctree)/arch/$(ARCH)/configs/$(config).config)
+	+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
+endef
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 09/10] kbuild: Add config fragment merge functionality
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Nicolas Saenz Julienne, soc, devicetree, linux-arm-kernel,
	linuxppc-dev, linux-kbuild, Alexander Stein

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

So far this function was only used locally in powerpc, some other
architectures might benefit from it. Move it into
scripts/Makefile.defconf.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
Changes in v3:
* Added Arnd's A-b

 arch/powerpc/Makefile    | 12 +-----------
 scripts/Makefile.defconf | 15 +++++++++++++++
 2 files changed, 16 insertions(+), 11 deletions(-)
 create mode 100644 scripts/Makefile.defconf

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 4fd630efe39d3..6ec5b9f7b7caa 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -253,17 +253,7 @@ PHONY += bootwrapper_install
 bootwrapper_install:
 	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
-# Used to create 'merged defconfigs'
-# To use it $(call) it with the first argument as the base defconfig
-# and the second argument as a space separated list of .config files to merge,
-# without the .config suffix.
-define merge_into_defconfig
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
-		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/$(1) \
-		$(foreach config,$(2),$(srctree)/arch/$(ARCH)/configs/$(config).config)
-	+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
-endef
-
+include $(srctree)/scripts/Makefile.defconf
 PHONY += pseries_le_defconfig
 pseries_le_defconfig:
 	$(call merge_into_defconfig,pseries_defconfig,le)
diff --git a/scripts/Makefile.defconf b/scripts/Makefile.defconf
new file mode 100644
index 0000000000000..ab332f7534f51
--- /dev/null
+++ b/scripts/Makefile.defconf
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+# Configuration heplers
+
+# Creates 'merged defconfigs'
+# ---------------------------------------------------------------------------
+# Usage:
+#   $(call merge_into_defconfig,base_config,config_fragment1 config_fragment2 ...)
+#
+# Input config fragments without '.config' suffix
+define merge_into_defconfig
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/$(1) \
+		$(foreach config,$(2),$(srctree)/arch/$(ARCH)/configs/$(config).config)
+	+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
+endef
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 09/10] kbuild: Add config fragment merge functionality
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc,
	Nicolas Saenz Julienne, linuxppc-dev, linux-arm-kernel

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

So far this function was only used locally in powerpc, some other
architectures might benefit from it. Move it into
scripts/Makefile.defconf.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
Changes in v3:
* Added Arnd's A-b

 arch/powerpc/Makefile    | 12 +-----------
 scripts/Makefile.defconf | 15 +++++++++++++++
 2 files changed, 16 insertions(+), 11 deletions(-)
 create mode 100644 scripts/Makefile.defconf

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 4fd630efe39d3..6ec5b9f7b7caa 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -253,17 +253,7 @@ PHONY += bootwrapper_install
 bootwrapper_install:
 	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
-# Used to create 'merged defconfigs'
-# To use it $(call) it with the first argument as the base defconfig
-# and the second argument as a space separated list of .config files to merge,
-# without the .config suffix.
-define merge_into_defconfig
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
-		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/$(1) \
-		$(foreach config,$(2),$(srctree)/arch/$(ARCH)/configs/$(config).config)
-	+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
-endef
-
+include $(srctree)/scripts/Makefile.defconf
 PHONY += pseries_le_defconfig
 pseries_le_defconfig:
 	$(call merge_into_defconfig,pseries_defconfig,le)
diff --git a/scripts/Makefile.defconf b/scripts/Makefile.defconf
new file mode 100644
index 0000000000000..ab332f7534f51
--- /dev/null
+++ b/scripts/Makefile.defconf
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+# Configuration heplers
+
+# Creates 'merged defconfigs'
+# ---------------------------------------------------------------------------
+# Usage:
+#   $(call merge_into_defconfig,base_config,config_fragment1 config_fragment2 ...)
+#
+# Input config fragments without '.config' suffix
+define merge_into_defconfig
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/$(1) \
+		$(foreach config,$(2),$(srctree)/arch/$(ARCH)/configs/$(config).config)
+	+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
+endef
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 10/10] ARM: add multi_v7_lpae_defconfig
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 11:02   ` Alexander Stein
  -1 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Nicolas Saenz Julienne, soc, devicetree, linux-arm-kernel,
	linuxppc-dev, linux-kbuild, Alexander Stein

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

The only missing configuration option preventing us from using
multi_v7_defconfig with the Raspberry Pi 4 is ARM_LPAE. It's needed as
the PCIe controller found on the SoC depends on 64bit addressing, yet
can't be included as not all v7 boards support LPAE.

Introduce multi_v7_lpae_defconfig, built off multi_v7_defconfig, which will
avoid us having to duplicate and maintain multiple similar configurations.

Needless to say the Raspberry Pi 4 is not the only platform that can
benefit from this new configuration.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* As per Arnd's suggestion add CONFIG_VMSPLIT_2G to lpae.config fragment
* List multi_v7_lpae_defconfig target in 'make help' as well

Unfortunately the list of defconfigs is autogenerated, so this new
(explicit) target doesn't fit into this list. Therefore it's added to
'archhelp' instead.

 arch/arm/Makefile            | 6 ++++++
 arch/arm/configs/lpae.config | 2 ++
 2 files changed, 8 insertions(+)
 create mode 100644 arch/arm/configs/lpae.config

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a353b92641f36..485a439e22ca8 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -314,6 +314,10 @@ endif
 # My testing targets (bypasses dependencies)
 bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -329,4 +333,6 @@ define archhelp
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
   echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/configs/lpae.config b/arch/arm/configs/lpae.config
new file mode 100644
index 0000000000000..a6d6f7ab3c01a
--- /dev/null
+++ b/arch/arm/configs/lpae.config
@@ -0,0 +1,2 @@
+CONFIG_ARM_LPAE=y
+CONFIG_VMSPLIT_2G=y
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 10/10] ARM: add multi_v7_lpae_defconfig
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: devicetree, linux-kbuild, Alexander Stein, soc,
	Nicolas Saenz Julienne, linuxppc-dev, linux-arm-kernel

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

The only missing configuration option preventing us from using
multi_v7_defconfig with the Raspberry Pi 4 is ARM_LPAE. It's needed as
the PCIe controller found on the SoC depends on 64bit addressing, yet
can't be included as not all v7 boards support LPAE.

Introduce multi_v7_lpae_defconfig, built off multi_v7_defconfig, which will
avoid us having to duplicate and maintain multiple similar configurations.

Needless to say the Raspberry Pi 4 is not the only platform that can
benefit from this new configuration.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* As per Arnd's suggestion add CONFIG_VMSPLIT_2G to lpae.config fragment
* List multi_v7_lpae_defconfig target in 'make help' as well

Unfortunately the list of defconfigs is autogenerated, so this new
(explicit) target doesn't fit into this list. Therefore it's added to
'archhelp' instead.

 arch/arm/Makefile            | 6 ++++++
 arch/arm/configs/lpae.config | 2 ++
 2 files changed, 8 insertions(+)
 create mode 100644 arch/arm/configs/lpae.config

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a353b92641f36..485a439e22ca8 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -314,6 +314,10 @@ endif
 # My testing targets (bypasses dependencies)
 bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -329,4 +333,6 @@ define archhelp
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
   echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/configs/lpae.config b/arch/arm/configs/lpae.config
new file mode 100644
index 0000000000000..a6d6f7ab3c01a
--- /dev/null
+++ b/arch/arm/configs/lpae.config
@@ -0,0 +1,2 @@
+CONFIG_ARM_LPAE=y
+CONFIG_VMSPLIT_2G=y
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 38+ messages in thread
* [PATCH v3 10/10] ARM: add multi_v7_lpae_defconfig
@ 2023-01-24 11:02   ` Alexander Stein
  0 siblings, 0 replies; 38+ messages in thread
From: Alexander Stein @ 2023-01-24 11:02 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson,
	Shawn Guo, Li Yang, Russell King, Marek Vasut, Marcel Ziswiler,
	Michael Ellerman, Nicholas Piggin, Christophe Leroy,
	Masahiro Yamada, Nathan Chancellor, Nick Desaulniers,
	Nicolas Schier
  Cc: Nicolas Saenz Julienne, soc, devicetree, linux-arm-kernel,
	linuxppc-dev, linux-kbuild, Alexander Stein

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

The only missing configuration option preventing us from using
multi_v7_defconfig with the Raspberry Pi 4 is ARM_LPAE. It's needed as
the PCIe controller found on the SoC depends on 64bit addressing, yet
can't be included as not all v7 boards support LPAE.

Introduce multi_v7_lpae_defconfig, built off multi_v7_defconfig, which will
avoid us having to duplicate and maintain multiple similar configurations.

Needless to say the Raspberry Pi 4 is not the only platform that can
benefit from this new configuration.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v3:
* As per Arnd's suggestion add CONFIG_VMSPLIT_2G to lpae.config fragment
* List multi_v7_lpae_defconfig target in 'make help' as well

Unfortunately the list of defconfigs is autogenerated, so this new
(explicit) target doesn't fit into this list. Therefore it's added to
'archhelp' instead.

 arch/arm/Makefile            | 6 ++++++
 arch/arm/configs/lpae.config | 2 ++
 2 files changed, 8 insertions(+)
 create mode 100644 arch/arm/configs/lpae.config

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a353b92641f36..485a439e22ca8 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -314,6 +314,10 @@ endif
 # My testing targets (bypasses dependencies)
 bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -329,4 +333,6 @@ define archhelp
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
   echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/configs/lpae.config b/arch/arm/configs/lpae.config
new file mode 100644
index 0000000000000..a6d6f7ab3c01a
--- /dev/null
+++ b/arch/arm/configs/lpae.config
@@ -0,0 +1,2 @@
+CONFIG_ARM_LPAE=y
+CONFIG_VMSPLIT_2G=y
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 38+ messages in thread
* Re: [PATCH v3 00/10] TQMLS1021A support
  2023-01-24 11:02 ` Alexander Stein
                   ` (11 preceding siblings ...)
  (?)
@ 2023-01-24 21:31 ` patchwork-bot+linux-soc
  2023-01-24 21:35   ` Arnd Bergmann
  -1 siblings, 1 reply; 38+ messages in thread
From: patchwork-bot+linux-soc @ 2023-01-24 21:31 UTC (permalink / raw)
  To: Alexander Stein; +Cc: soc

Hello:

This series was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Tue, 24 Jan 2023 12:02:03 +0100 you wrote:
> Hi,
> 
> thanks everyone for the feedback. This is the third round of this series to
> add support for the TQMLS1021A using the MBLS1021A mainboard.
> The changelog is included in the individual patches.
> 
> Best regards,
> Alexander
> 
> [...]

Here is the summary with links:
  - [v3,01/10] dt-bindings: arm: fsl: add TQ-Systems LS1021A board
    (no matching commit)
  - [v3,02/10] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
    (no matching commit)
  - [v3,03/10] ARM: dts: ls1021a: add TQMLS1021A flash partition layout
    (no matching commit)
  - [v3,04/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
    (no matching commit)
  - [v3,05/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
    (no matching commit)
  - [v3,06/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
    (no matching commit)
  - [v3,07/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
    (no matching commit)
  - [v3,08/10] ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
    https://git.kernel.org/soc/soc/c/af8bd008315a
  - [v3,09/10] kbuild: Add config fragment merge functionality
    https://git.kernel.org/soc/soc/c/a400c287ce98
  - [v3,10/10] ARM: add multi_v7_lpae_defconfig
    https://git.kernel.org/soc/soc/c/e9faf9b0b07a

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



^ permalink raw reply	[flat|nested] 38+ messages in thread
* Re: [PATCH v3 00/10] TQMLS1021A support
  2023-01-24 21:31 ` [PATCH v3 00/10] TQMLS1021A support patchwork-bot+linux-soc
@ 2023-01-24 21:35   ` Arnd Bergmann
  0 siblings, 0 replies; 38+ messages in thread
From: Arnd Bergmann @ 2023-01-24 21:35 UTC (permalink / raw)
  To: patchwork-bot+linux-soc, Alexander Stein; +Cc: soc

On Tue, Jan 24, 2023, at 22:31, patchwork-bot+linux-soc@kernel.org wrote:
> Hello:
>
> This series was applied to soc/soc.git (for-next)
> by Arnd Bergmann <arnd@arndb.de>:
>
> On Tue, 24 Jan 2023 12:02:03 +0100 you wrote:
>> Hi,
>> 
>> thanks everyone for the feedback. This is the third round of this series to
>> add support for the TQMLS1021A using the MBLS1021A mainboard.
>> The changelog is included in the individual patches.
>> 
>> Best regards,
>> Alexander
>> 
>> [...]
>
> Here is the summary with links:
>   - [v3,01/10] dt-bindings: arm: fsl: add TQ-Systems LS1021A board
>     (no matching commit)
>   - [v3,02/10] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
>     (no matching commit)
>   - [v3,03/10] ARM: dts: ls1021a: add TQMLS1021A flash partition layout
>     (no matching commit)
>   - [v3,04/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS 
> TM070JVHG33 overlay
>     (no matching commit)
>   - [v3,05/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
>     (no matching commit)
>   - [v3,06/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH 
> DC44 overlay
>     (no matching commit)
>   - [v3,07/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH 
> FC21 overlay
>     (no matching commit)
>   - [v3,08/10] ARM: multi_v7_defconfig: Add options to support 
> TQMLS102xA series
>     https://git.kernel.org/soc/soc/c/af8bd008315a
>   - [v3,09/10] kbuild: Add config fragment merge functionality
>     https://git.kernel.org/soc/soc/c/a400c287ce98
>   - [v3,10/10] ARM: add multi_v7_lpae_defconfig
>     https://git.kernel.org/soc/soc/c/e9faf9b0b07a
>

To clarify: only the last three patches are in the soc/defconfig
branch, the dts patches are not yet applied.

      Arnd

^ permalink raw reply	[flat|nested] 38+ messages in thread
* Re: [PATCH v3 00/10] TQMLS1021A support
  2023-01-24 11:02 ` Alexander Stein
  (?)
@ 2023-01-24 21:37   ` Arnd Bergmann
  -1 siblings, 0 replies; 38+ messages in thread
From: Arnd Bergmann @ 2023-01-24 21:37 UTC (permalink / raw)
  To: Alexander Stein, Rob Herring, Krzysztof Kozlowski,
	Olof Johansson, Shawn Guo, Li Yang, Russell King, Marek Vasut,
	Marcel Ziswiler, Michael Ellerman, Nicholas Piggin,
	Christophe Leroy, Masahiro Yamada, Nathan Chancellor,
	Nick Desaulniers, Nicolas Schier
  Cc: soc, devicetree, linux-arm-kernel, linuxppc-dev, linux-kbuild

On Tue, Jan 24, 2023, at 12:02, Alexander Stein wrote:
>
> thanks everyone for the feedback. This is the third round of this series to
> add support for the TQMLS1021A using the MBLS1021A mainboard.
> The changelog is included in the individual patches.
>
> Best regards,
> Alexander
>
> Alexander Stein (7):
>   ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
>   ARM: dts: ls1021a: add TQMLS1021A flash partition layout
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
>   ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
>
> Matthias Schiffer (1):
>   dt-bindings: arm: fsl: add TQ-Systems LS1021A board
>
> Nicolas Saenz Julienne (2):
>   kbuild: Add config fragment merge functionality
>   ARM: add multi_v7_lpae_defconfig

I have applied the last three patches in the defconfig branch
to make things easier here. The dts patches should go through
the layerscape tree, so I'll wait for Shawn Guo or Li Yang
to pick those up once everyone is happy with them.

     Arnd

^ permalink raw reply	[flat|nested] 38+ messages in thread
* Re: [PATCH v3 00/10] TQMLS1021A support
@ 2023-01-24 21:37   ` Arnd Bergmann
  0 siblings, 0 replies; 38+ messages in thread
From: Arnd Bergmann @ 2023-01-24 21:37 UTC (permalink / raw)
  To: Alexander Stein, Rob Herring, Krzysztof Kozlowski,
	Olof Johansson, Shawn Guo, Li Yang, Russell King, Marek Vasut,
	Marcel Ziswiler, Michael Ellerman, Nicholas Piggin,
	Christophe Leroy, Masahiro Yamada, Nathan Chancellor,
	Nick Desaulniers, Nicolas Schier
  Cc: devicetree, soc, linuxppc-dev, linux-arm-kernel, linux-kbuild

On Tue, Jan 24, 2023, at 12:02, Alexander Stein wrote:
>
> thanks everyone for the feedback. This is the third round of this series to
> add support for the TQMLS1021A using the MBLS1021A mainboard.
> The changelog is included in the individual patches.
>
> Best regards,
> Alexander
>
> Alexander Stein (7):
>   ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
>   ARM: dts: ls1021a: add TQMLS1021A flash partition layout
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
>   ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
>
> Matthias Schiffer (1):
>   dt-bindings: arm: fsl: add TQ-Systems LS1021A board
>
> Nicolas Saenz Julienne (2):
>   kbuild: Add config fragment merge functionality
>   ARM: add multi_v7_lpae_defconfig

I have applied the last three patches in the defconfig branch
to make things easier here. The dts patches should go through
the layerscape tree, so I'll wait for Shawn Guo or Li Yang
to pick those up once everyone is happy with them.

     Arnd

^ permalink raw reply	[flat|nested] 38+ messages in thread
* Re: [PATCH v3 00/10] TQMLS1021A support
@ 2023-01-24 21:37   ` Arnd Bergmann
  0 siblings, 0 replies; 38+ messages in thread
From: Arnd Bergmann @ 2023-01-24 21:37 UTC (permalink / raw)
  To: Alexander Stein, Rob Herring, Krzysztof Kozlowski,
	Olof Johansson, Shawn Guo, Li Yang, Russell King, Marek Vasut,
	Marcel Ziswiler, Michael Ellerman, Nicholas Piggin,
	Christophe Leroy, Masahiro Yamada, Nathan Chancellor,
	Nick Desaulniers, Nicolas Schier
  Cc: soc, devicetree, linux-arm-kernel, linuxppc-dev, linux-kbuild

On Tue, Jan 24, 2023, at 12:02, Alexander Stein wrote:
>
> thanks everyone for the feedback. This is the third round of this series to
> add support for the TQMLS1021A using the MBLS1021A mainboard.
> The changelog is included in the individual patches.
>
> Best regards,
> Alexander
>
> Alexander Stein (7):
>   ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
>   ARM: dts: ls1021a: add TQMLS1021A flash partition layout
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay
>   ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay
>   ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
>
> Matthias Schiffer (1):
>   dt-bindings: arm: fsl: add TQ-Systems LS1021A board
>
> Nicolas Saenz Julienne (2):
>   kbuild: Add config fragment merge functionality
>   ARM: add multi_v7_lpae_defconfig

I have applied the last three patches in the defconfig branch
to make things easier here. The dts patches should go through
the layerscape tree, so I'll wait for Shawn Guo or Li Yang
to pick those up once everyone is happy with them.

     Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 38+ messages in thread
end of thread, other threads:[~2023-01-24 21:38 UTC | newest]

Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-24 11:02 [PATCH v3 00/10] TQMLS1021A support Alexander Stein
2023-01-24 11:02 ` Alexander Stein
2023-01-24 11:02 ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 01/10] dt-bindings: arm: fsl: add TQ-Systems LS1021A board Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 02/10] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 03/10] ARM: dts: ls1021a: add TQMLS1021A flash partition layout Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 04/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS TM070JVHG33 overlay Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 05/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA HDMI overlay Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 06/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH DC44 overlay Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 07/10] ARM: dts: ls1021a: add TQMLS1021A/MBLS102xA LVDS CDTECH FC21 overlay Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 08/10] ARM: multi_v7_defconfig: Add options to support TQMLS102xA series Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 09/10] kbuild: Add config fragment merge functionality Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02 ` [PATCH v3 10/10] ARM: add multi_v7_lpae_defconfig Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 11:02   ` Alexander Stein
2023-01-24 21:31 ` [PATCH v3 00/10] TQMLS1021A support patchwork-bot+linux-soc
2023-01-24 21:35   ` Arnd Bergmann
2023-01-24 21:37 ` Arnd Bergmann
2023-01-24 21:37   ` Arnd Bergmann
2023-01-24 21:37   ` Arnd Bergmann

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.