* [PATCH v2 00/87] Clean up of bad Kconfig options
@ 2023-01-29 0:57 Simon Glass
2023-01-29 0:57 ` [PATCH v2 01/87] moveconfig: Add an option to compare Kconfig against source Simon Glass
` (87 more replies)
0 siblings, 88 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Tom Rini, Simon Glass, Albert Aribaud, Alexey Brodkin,
Alison Wang, Anatolij Gustschin, Andreas Bießmann,
Andy Fleming, Angelo Dureghello, Heiko Schocher, Jeffy Chen,
Jerry Van Baren, Joe Hershberger, Kever Yang, Lukasz Majewski,
Marek Vasut, Mario Six, Masahiro Yamada, Minkyu Kang,
Nobuhiro Iwamatsu, Philipp Tomsich, Priyanka Jain, Stefan Roese,
Stefano Babic, Wolfgang Denk, huang lin
This series adds source scanning to moveconfig.py so that it can look for
Kconfig options mentioned in the source which do not appear in Kconfig,
and vice versa.
This tool is then used to clean up the unused or obsolete options
mentioned in Makefiles, along with any attached source code.
No functional change is intended.
This should make it easier to move to the new kconfig approach.
Changes in v2:
- Just drop the reference
- Drop patch "treewide: Correct invalid Kconfig syntax and warnings"
Simon Glass (87):
moveconfig: Add an option to compare Kconfig against source
power: Drop fg_max77693
nand: Drop CONFIG_NAND_SPEAR
power: Drop pmic_max77693.c
gpio: Drop adi_gpio2
Makefile: Drop CONFIG_AIS_CONFIG_FILE
misc: Drop ali512x
sandbox: Drop reference to CONFIG_ARCH_DEVICE_TREE
Rename ARCH_NPCM7xx
arm: mvebu: Remove reference to ARMADA_370
arm: mvebu: Drop reference to CONFIG_ARMADA_39X
ppc: Drop bat_rw
rockchip: Correct a reference to CONFIG_BOOT_MODE_REG
cmd: Add an option to enable the ini command
cmd: Drop mfsl command
Correct CONFIG_CONTROLCENTERDC
Drop dataflash_mmc_mux command
Drop CONFIG_DM644X_GPIO
Makefile: Avoid use of invalid CONFIG_ option
env: Drop ENV_IS_IN_SATA
samsung: Drop CONFIG_EXYNOS_PWM_BL
fpga: Add a LATTICE option
fpga: Add a FPGA_STRATIX_II option
misc: Drop mc9sdz60 driver
freescale: Drop unused pixis code
freescale: Drop unused ftpmu010 driver
rcar: Drop timer
i2c: Rename I2C_MUX_PCA954x
imx: Drop unused CONFIG_IMX
arm: Drop old kona code
video: Drop unused lg4573 driver
m68k: Drop unused CONFIG_M52277
m68k: Rename MCF5301x
m68k: Rename MCF532x
m68k: Rename MCF5441x
m68k: Drop unused CONFIG_MACH_DAVINCI_DA830_EVM
arm: Drop CONFIG_MMU
arc: Drop CONFIG_MMU
ppc: Rename MPC83xx
gpio: Drop unused mpc83xx_gpio driver
ppc: Rename MPC85xx
powerpc: Rename MPC86xx
imx: Rename CONFIG_MXS to CFG_MXS
nand: Drop unused actl_nand driver
mtd: Drop unused fsl_upm driver
mtd: Drop unused fsmc_nand driver
mtd: Drop unused kb9202_nand driver
mtd: Drop unused nand_plat driver
Makefile: Drop CONFIG_OF_EARLY_FLATTREE
omap: Drop unused CONFIG_OMAP_USB_PHY
mtd: Drop unused CONFIG_ONENAND_U_BOOT
ppc: Drop unused CONFIG_P2020DS
gpio: Drop unused pca9698 driver
samsung: Rename PINCTRL_EXYNOS78x0
power: Drop unused bat_trats driver and battery code
power: Drop unused fg_max17042 driver and fuel gauge code
power: Drop unused muic_max77693 driver and mfd code
power: Drop unused muic_max8997 driver
freescale: Drop unused pq-mds-pib driver
rmobile: Drop CONFIG_RMOBILE
rtc: Drop old and unused drivers
mtd: Drop unused CONFIG_S32V234
mtd: Drop unused scf0403_lcd driver
rmobile: Drop CONFIG_SH73A0 and associated code
sh4: Drop unused pci_sh7780 driver
Drop ubsha1 tool
arm: Rename STM32MP13x
arm: Rename STM32MP15x
sysreset: at91: Correct Makefile rule for SYSRESET_AT91
gdsys: Drop unused fpga file
sh4: Drop unused kona_i2c driver
compulab: Drop CONFIG_TARGET_MCM_IMX8M_MINI
freescale: Drop CONFIG_TARGET_MPC8536DS et al
sh4: Drop unused twl6030 driver
ppc: Makefile: Drop unused ppc4xx code
armada: usb: net: Drop unused USB drivers
usb: Drop unused ehci-faraday driver
usb: Drop unused fotg210 gadget
rmobile: Drop unused ehci-rmobile driver
usb: Drop unused ehci-vct driver
usb: Drop unused sl811-hcd driver
imx: Drop CONFIG_USE_PLUGIN
freescale: Drop unused vsc3316_3308 driver
watchdog: Rename WDT_MPC8xx
tools: Drop xway-swap-bytes tool
freescale: Drop unused zm7300 driver
fdt: Drop use of non-existent OF_PLATDATA option
Kconfig | 2 +-
Makefile | 24 +-
README | 7 -
api/api_platform-powerpc.c | 4 +-
arch/Kconfig | 2 +-
arch/Kconfig.nxp | 6 +-
arch/arc/config.mk | 4 -
arch/arc/lib/ints_low.S | 5 -
arch/arm/cpu/arm920t/Makefile | 2 -
arch/arm/cpu/armv7/Makefile | 2 -
arch/arm/cpu/armv7/kona-common/Makefile | 8 -
arch/arm/cpu/armv7/kona-common/clk-stubs.c | 25 -
.../arm/cpu/armv7/kona-common/hwinit-common.c | 17 -
arch/arm/cpu/armv7/kona-common/reset.S | 25 -
arch/arm/cpu/armv7/kona-common/s_init.c | 11 -
arch/arm/cpu/armv8/Makefile | 1 -
arch/arm/dts/Makefile | 6 +-
arch/arm/dts/stm32mp15-u-boot.dtsi | 2 +-
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 4 +-
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 4 +-
arch/arm/lib/debug.S | 21 -
arch/arm/mach-exynos/Kconfig | 6 +-
arch/arm/mach-mvebu/Kconfig | 2 +-
arch/arm/mach-mvebu/Makefile | 4 +-
arch/arm/mach-npcm/Kconfig | 4 +-
arch/arm/mach-npcm/Makefile | 2 +-
arch/arm/mach-npcm/npcm7xx/Kconfig | 2 +-
arch/arm/mach-rmobile/Makefile | 2 -
arch/arm/mach-rmobile/cpu_info-sh73a0.c | 43 -
arch/arm/mach-rmobile/cpu_info.c | 1 -
.../mach-rmobile/include/mach/ehci-rmobile.h | 146 -
arch/arm/mach-rmobile/include/mach/gpio.h | 5 +-
arch/arm/mach-rmobile/include/mach/rmobile.h | 5 +-
.../mach-rmobile/include/mach/sh73a0-gpio.h | 553 ----
arch/arm/mach-rmobile/include/mach/sh73a0.h | 289 --
arch/arm/mach-rmobile/pfc-sh73a0.c | 2807 -----------------
arch/arm/mach-rmobile/timer.c | 87 -
arch/arm/mach-rockchip/Makefile | 2 +-
arch/arm/mach-stm32mp/Kconfig | 8 +-
arch/arm/mach-stm32mp/Kconfig.13x | 4 +-
arch/arm/mach-stm32mp/Kconfig.15x | 6 +-
arch/arm/mach-stm32mp/Makefile | 4 +-
arch/arm/mach-stm32mp/cmd_stm32key.c | 20 +-
.../cmd_stm32prog/cmd_stm32prog.c | 2 +-
.../mach-stm32mp/cmd_stm32prog/stm32prog.c | 4 +-
.../mach-stm32mp/cmd_stm32prog/stm32prog.h | 6 +-
arch/arm/mach-stm32mp/fdt.c | 12 +-
arch/arm/mach-stm32mp/include/mach/stm32.h | 16 +-
.../arm/mach-stm32mp/include/mach/stm32prog.h | 2 +-
arch/m68k/Kconfig | 14 +-
arch/m68k/Makefile | 9 +-
arch/m68k/cpu/mcf532x/cpu.c | 4 +-
arch/m68k/cpu/mcf532x/cpu_init.c | 8 +-
arch/m68k/cpu/mcf532x/speed.c | 28 +-
arch/m68k/cpu/mcf532x/start.S | 2 +-
arch/m68k/cpu/mcf5445x/cpu_init.c | 12 +-
arch/m68k/cpu/mcf5445x/dspi.c | 4 +-
arch/m68k/cpu/mcf5445x/speed.c | 4 +-
arch/m68k/cpu/mcf5445x/start.S | 8 +-
arch/m68k/include/asm/cache.h | 8 +-
arch/m68k/include/asm/coldfire/skha.h | 2 +-
arch/m68k/include/asm/global_data.h | 2 +-
arch/m68k/include/asm/immap.h | 2 +-
arch/m68k/include/asm/immap_5301x.h | 2 +-
arch/m68k/include/asm/immap_5441x.h | 2 +-
arch/mips/mach-octeon/octeon_fdt.c | 43 +-
arch/powerpc/Kconfig | 14 +-
arch/powerpc/Makefile | 2 +-
arch/powerpc/cpu/Makefile | 6 +-
arch/powerpc/cpu/mpc83xx/Kconfig | 4 +-
arch/powerpc/cpu/mpc83xx/cpu.c | 4 +-
arch/powerpc/cpu/mpc83xx/start.S | 2 +-
arch/powerpc/cpu/mpc85xx/Kconfig | 16 +-
arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/c29x_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/cpu.c | 10 +-
arch/powerpc/cpu/mpc85xx/cpu_init.c | 34 +-
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 14 +-
arch/powerpc/cpu/mpc85xx/fdt.c | 6 +-
.../powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 4 +-
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 10 +-
arch/powerpc/cpu/mpc85xx/interrupts.c | 8 +-
arch/powerpc/cpu/mpc85xx/mp.c | 32 +-
arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c | 8 +-
arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c | 10 +-
arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/p1010_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/p1021_serdes.c | 8 +-
arch/powerpc/cpu/mpc85xx/p1023_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/p2020_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/qe_io.c | 2 +-
arch/powerpc/cpu/mpc85xx/speed.c | 14 +-
arch/powerpc/cpu/mpc85xx/spl_minimal.c | 6 +-
arch/powerpc/cpu/mpc85xx/start.S | 28 +-
arch/powerpc/cpu/mpc8xxx/Makefile | 4 +-
arch/powerpc/cpu/mpc8xxx/cpu.c | 14 +-
arch/powerpc/cpu/mpc8xxx/fdt.c | 4 +-
arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 6 +-
arch/powerpc/cpu/mpc8xxx/law.c | 2 +-
arch/powerpc/cpu/mpc8xxx/srio.c | 20 +-
arch/powerpc/include/asm/config.h | 4 +-
arch/powerpc/include/asm/config_mpc85xx.h | 8 +-
arch/powerpc/include/asm/fsl_dma.h | 4 +-
arch/powerpc/include/asm/fsl_lbc.h | 6 +-
arch/powerpc/include/asm/fsl_liodn.h | 26 +-
arch/powerpc/include/asm/fsl_pci.h | 4 +-
arch/powerpc/include/asm/global_data.h | 12 +-
arch/powerpc/include/asm/immap_83xx.h | 14 +-
arch/powerpc/include/asm/immap_85xx.h | 728 ++---
arch/powerpc/include/asm/mpc85xx_gpio.h | 4 +-
arch/powerpc/include/asm/ppc.h | 20 +-
arch/powerpc/include/asm/processor.h | 18 +-
arch/powerpc/lib/Makefile | 1 -
arch/powerpc/lib/bat_rw.c | 244 --
arch/powerpc/lib/bdinfo.c | 4 +-
arch/powerpc/lib/bootm.c | 4 +-
arch/powerpc/lib/ppccache.S | 4 +-
arch/powerpc/lib/stack.c | 2 +-
arch/sandbox/config.mk | 2 -
arch/sh/include/asm/pci.h | 2 -
.../compulab/imx8mm-cl-iot-gate/ddr/Makefile | 4 -
board/davinci/da8xxevm/Makefile | 1 -
board/freescale/common/Makefile | 8 -
board/freescale/common/fsl_chain_of_trust.c | 12 +-
board/freescale/common/fsl_validate.c | 8 +-
board/freescale/common/mpc85xx_sleep.c | 6 +-
board/freescale/common/pixis.c | 470 ---
board/freescale/common/pixis.h | 54 -
board/freescale/common/pq-mds-pib.c | 60 -
board/freescale/common/pq-mds-pib.h | 9 -
board/freescale/common/via.h | 4 +-
board/freescale/common/vid.c | 2 +-
board/freescale/common/vsc3316_3308.c | 530 ----
board/freescale/common/zm7300.c | 232 --
board/freescale/common/zm7300.h | 21 -
board/freescale/m53017evb/README | 6 +-
board/freescale/m5373evb/README | 2 +-
board/freescale/mpc837xerdb/README | 2 +-
board/freescale/mpc8548cds/mpc8548cds.c | 6 +-
board/freescale/mx7ulp_evk/Makefile | 4 -
board/freescale/p1010rdb/p1010rdb.c | 28 +-
board/freescale/p1010rdb/spl.c | 6 +-
board/freescale/p1010rdb/spl_minimal.c | 4 +-
board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 20 +-
board/freescale/p1_p2_rdb_pc/spl.c | 8 +-
board/freescale/p1_p2_rdb_pc/spl_minimal.c | 4 +-
board/freescale/p2041rdb/p2041rdb.c | 4 +-
board/freescale/t102xrdb/eth_t102xrdb.c | 2 +-
board/freescale/t102xrdb/spl.c | 6 +-
board/freescale/t102xrdb/t102xrdb.c | 16 +-
board/freescale/t104xrdb/spl.c | 2 +-
board/freescale/t104xrdb/t104xrdb.c | 2 +-
board/freescale/t208xqds/eth_t208xqds.c | 6 +-
board/freescale/t208xqds/spl.c | 2 +-
board/freescale/t208xqds/t208xqds.c | 2 +-
board/freescale/t208xrdb/spl.c | 2 +-
board/freescale/t4rdb/eth.c | 2 +-
board/freescale/t4rdb/spl.c | 2 +-
board/gdsys/a38x/hre.c | 1 -
board/gdsys/common/Makefile | 3 +-
board/gdsys/common/fpga.c | 28 -
board/keymile/Kconfig | 8 +-
board/keymile/km83xx/Kconfig | 2 +-
board/keymile/kmcent2/kmcent2.c | 6 +-
board/socrates/socrates.c | 6 +-
board/st/common/Kconfig | 14 +-
board/st/common/stm32mp_mtdparts.c | 18 +-
board/st/stm32mp1/Kconfig | 4 +-
board/st/stm32mp1/stm32mp1.c | 6 +-
board/xes/common/Makefile | 7 +-
board/xes/common/actl_nand.c | 49 -
board/xes/common/fsl_8xxx_clk.c | 10 +-
board/xes/common/fsl_8xxx_misc.c | 6 +-
boot/Kconfig | 4 +-
cmd/Kconfig | 7 +
cmd/Makefile | 2 -
cmd/dataflash_mmc_mux.c | 48 -
cmd/mfsl.c | 387 ---
cmd/nvedit.c | 1 -
common/Kconfig | 2 +-
common/board_r.c | 2 +-
common/memsize.c | 2 +-
common/usb_hub.c | 18 -
configs/MPC837XERDB_defconfig | 2 +-
configs/MPC8548CDS_36BIT_defconfig | 2 +-
configs/MPC8548CDS_defconfig | 2 +-
configs/MPC8548CDS_legacy_defconfig | 2 +-
configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 +-
configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 +-
configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 +-
configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 +-
configs/P1010RDB-PA_NAND_defconfig | 2 +-
configs/P1010RDB-PA_NOR_defconfig | 2 +-
configs/P1010RDB-PA_SDCARD_defconfig | 2 +-
configs/P1010RDB-PA_SPIFLASH_defconfig | 2 +-
configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 +-
configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 +-
configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 +-
configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 +-
configs/P1010RDB-PB_NAND_defconfig | 2 +-
configs/P1010RDB-PB_NOR_defconfig | 2 +-
configs/P1010RDB-PB_SDCARD_defconfig | 2 +-
configs/P1010RDB-PB_SPIFLASH_defconfig | 2 +-
configs/P1020RDB-PC_36BIT_NAND_defconfig | 2 +-
configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 2 +-
configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 2 +-
configs/P1020RDB-PC_36BIT_defconfig | 2 +-
configs/P1020RDB-PC_NAND_defconfig | 2 +-
configs/P1020RDB-PC_SDCARD_defconfig | 2 +-
configs/P1020RDB-PC_SPIFLASH_defconfig | 2 +-
configs/P1020RDB-PC_defconfig | 2 +-
configs/P1020RDB-PD_NAND_defconfig | 2 +-
configs/P1020RDB-PD_SDCARD_defconfig | 2 +-
configs/P1020RDB-PD_SPIFLASH_defconfig | 2 +-
configs/P1020RDB-PD_defconfig | 2 +-
configs/P2020RDB-PC_36BIT_NAND_defconfig | 2 +-
configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 2 +-
configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 2 +-
configs/P2020RDB-PC_36BIT_defconfig | 2 +-
configs/P2020RDB-PC_NAND_defconfig | 2 +-
configs/P2020RDB-PC_SDCARD_defconfig | 2 +-
configs/P2020RDB-PC_SPIFLASH_defconfig | 2 +-
configs/P2020RDB-PC_defconfig | 2 +-
configs/P2041RDB_NAND_defconfig | 2 +-
configs/P2041RDB_SDCARD_defconfig | 2 +-
configs/P2041RDB_SPIFLASH_defconfig | 2 +-
configs/P2041RDB_defconfig | 2 +-
configs/SBx81LIFKW_defconfig | 2 +-
configs/SBx81LIFXCAT_defconfig | 2 +-
configs/T1024RDB_NAND_defconfig | 2 +-
configs/T1024RDB_SDCARD_defconfig | 2 +-
configs/T1024RDB_SPIFLASH_defconfig | 2 +-
configs/T1024RDB_defconfig | 2 +-
configs/T1042D4RDB_NAND_defconfig | 2 +-
configs/T1042D4RDB_SDCARD_defconfig | 2 +-
configs/T1042D4RDB_SPIFLASH_defconfig | 2 +-
configs/T1042D4RDB_defconfig | 2 +-
configs/T2080QDS_NAND_defconfig | 2 +-
configs/T2080QDS_SDCARD_defconfig | 2 +-
configs/T2080QDS_SECURE_BOOT_defconfig | 2 +-
configs/T2080QDS_SPIFLASH_defconfig | 2 +-
configs/T2080QDS_SRIO_PCIE_BOOT_defconfig | 2 +-
configs/T2080QDS_defconfig | 2 +-
configs/T2080RDB_NAND_defconfig | 2 +-
configs/T2080RDB_SDCARD_defconfig | 2 +-
configs/T2080RDB_SPIFLASH_defconfig | 2 +-
configs/T2080RDB_defconfig | 2 +-
configs/T2080RDB_revD_NAND_defconfig | 2 +-
configs/T2080RDB_revD_SDCARD_defconfig | 2 +-
configs/T2080RDB_revD_SPIFLASH_defconfig | 2 +-
configs/T2080RDB_revD_defconfig | 2 +-
configs/T4240RDB_SDCARD_defconfig | 2 +-
configs/T4240RDB_defconfig | 2 +-
configs/cgtqmx8_defconfig | 2 +-
configs/gazerbeam_defconfig | 2 +-
configs/ge_bx50v3_defconfig | 2 +-
configs/imx8qm_mek_defconfig | 2 +-
configs/imx8qm_rom7720_a1_4G_defconfig | 2 +-
configs/imx8qxp_mek_defconfig | 2 +-
configs/kmcent2_defconfig | 4 +-
configs/kmcoge5ne_defconfig | 4 +-
configs/kmeter1_defconfig | 4 +-
configs/kmopti2_defconfig | 4 +-
configs/kmsupx5_defconfig | 4 +-
configs/kmtepr2_defconfig | 4 +-
configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 2 +-
configs/ls1028aqds_tfa_defconfig | 2 +-
configs/ls1028aqds_tfa_lpuart_defconfig | 2 +-
configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 2 +-
configs/ls1028ardb_tfa_defconfig | 2 +-
configs/ls1088aqds_tfa_defconfig | 2 +-
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 2 +-
configs/ls1088ardb_tfa_defconfig | 2 +-
configs/ls2088aqds_tfa_defconfig | 2 +-
configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 2 +-
configs/ls2088ardb_tfa_defconfig | 2 +-
configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 2 +-
configs/lx2160aqds_tfa_defconfig | 2 +-
configs/lx2162aqds_tfa_SECURE_BOOT_defconfig | 2 +-
configs/lx2162aqds_tfa_defconfig | 2 +-
.../lx2162aqds_tfa_verified_boot_defconfig | 2 +-
configs/mvebu_puzzle-m801-88f8040_defconfig | 2 +-
configs/mx53ppd_defconfig | 2 +-
configs/octeontx2_96xx_defconfig | 2 +-
configs/qemu-ppce500_defconfig | 2 +-
configs/socrates_defconfig | 2 +-
configs/stm32mp13_defconfig | 4 +-
configs/stm32mp15_basic_defconfig | 2 +-
configs/stm32mp15_defconfig | 2 +-
configs/stm32mp15_trusted_defconfig | 4 +-
configs/tuge1_defconfig | 4 +-
configs/tuxx1_defconfig | 4 +-
configs/x530_defconfig | 2 +-
configs/xilinx_versal_net_virt_defconfig | 2 +-
configs/xilinx_versal_virt_defconfig | 2 +-
configs/xilinx_zynq_virt_defconfig | 2 +-
configs/xilinx_zynqmp_virt_defconfig | 2 +-
drivers/Makefile | 1 -
drivers/ata/fsl_sata.c | 2 +-
drivers/clk/Kconfig | 4 +-
drivers/clk/mpc83xx_clk.c | 4 +-
drivers/clk/mpc83xx_clk.h | 20 +-
drivers/clk/nuvoton/Makefile | 2 +-
drivers/clk/stm32/Kconfig | 4 +-
drivers/cpu/Kconfig | 6 +-
drivers/cpu/mpc83xx_cpu.c | 14 +-
drivers/cpu/mpc83xx_cpu.h | 8 +-
drivers/ddr/fsl/Kconfig | 10 +-
drivers/ddr/fsl/ctrl_regs.c | 2 +-
drivers/ddr/fsl/main.c | 2 +-
drivers/ddr/fsl/mpc85xx_ddr_gen2.c | 4 +-
drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 2 +-
drivers/dma/fsl_dma.c | 28 +-
drivers/fpga/Kconfig | 12 +
drivers/gpio/Makefile | 5 -
drivers/gpio/adi_gpio2.c | 425 ---
drivers/gpio/kona_gpio.c | 141 -
drivers/gpio/mpc83xx_gpio.c | 183 --
drivers/gpio/pca9698.c | 127 -
drivers/i2c/Kconfig | 2 +-
drivers/i2c/Makefile | 1 -
drivers/i2c/kona_i2c.c | 728 -----
drivers/i2c/muxes/Kconfig | 2 +-
drivers/i2c/muxes/Makefile | 2 +-
drivers/i2c/sh_i2c.c | 5 -
drivers/input/Makefile | 1 -
drivers/input/twl6030.c | 47 -
drivers/misc/Kconfig | 4 +-
drivers/misc/Makefile | 2 -
drivers/misc/ali512x.c | 401 ---
drivers/misc/mc9sdz60.c | 34 -
drivers/misc/mpc83xx_serdes.c | 4 +-
drivers/misc/npcm_otp.c | 2 +-
drivers/mmc/fsl_esdhc_imx.c | 12 +-
drivers/mtd/nand/raw/Makefile | 5 -
drivers/mtd/nand/raw/fsl_elbc_spl.c | 2 +-
drivers/mtd/nand/raw/fsl_upm.c | 187 --
drivers/mtd/nand/raw/fsmc_nand.c | 470 ---
drivers/mtd/nand/raw/kb9202_nand.c | 134 -
drivers/mtd/nand/raw/nand_plat.c | 65 -
drivers/net/fm/b4860.c | 8 +-
drivers/net/fm/p1023.c | 18 +-
drivers/net/fm/p4080.c | 8 +-
drivers/net/fm/p5020.c | 8 +-
drivers/net/fm/p5040.c | 8 +-
drivers/net/fm/t1024.c | 6 +-
drivers/net/fm/t1040.c | 2 +-
drivers/net/fm/t2080.c | 6 +-
drivers/net/fm/t4240.c | 8 +-
drivers/pci/Kconfig | 4 +-
drivers/pci/Makefile | 1 -
drivers/pci/pci_sh7780.c | 92 -
drivers/pinctrl/exynos/Kconfig | 2 +-
drivers/pinctrl/exynos/Makefile | 2 +-
drivers/pinctrl/nuvoton/Kconfig | 2 +-
drivers/power/Makefile | 4 -
drivers/power/battery/Makefile | 7 -
drivers/power/battery/bat_trats.c | 91 -
drivers/power/battery/bat_trats2.c | 65 -
drivers/power/ftpmu010.c | 87 -
drivers/power/fuel_gauge/Makefile | 6 -
drivers/power/fuel_gauge/fg_max17042.c | 287 --
drivers/power/mfd/Makefile | 8 -
drivers/power/mfd/fg_max77693.c | 137 -
drivers/power/mfd/muic_max77693.c | 77 -
drivers/power/mfd/pmic_max77693.c | 96 -
drivers/power/pmic/Makefile | 1 -
drivers/power/pmic/muic_max8997.c | 74 -
drivers/qe/qe.c | 14 +-
drivers/ram/Kconfig | 2 +-
drivers/ram/mpc83xx_sdram.c | 2 +-
drivers/rtc/Makefile | 14 -
drivers/rtc/at91sam9_rtt.c | 78 -
drivers/rtc/ds1302.c | 329 --
drivers/rtc/ds1306.c | 438 ---
drivers/rtc/ftrtc010.c | 122 -
drivers/rtc/imxdi.c | 223 --
drivers/rtc/max6900.c | 105 -
drivers/rtc/mk48t59.c | 175 -
drivers/rtc/mx27rtc.c | 64 -
drivers/rtc/rs5c372.c | 256 --
drivers/rtc/s3c24x0_rtc.c | 149 -
drivers/rtc/x1205.c | 161 -
drivers/serial/serial_sh.h | 10 +-
drivers/spi/fsl_espi.c | 2 +-
drivers/spi/mpc8xxx_spi.c | 2 +-
drivers/sysreset/Kconfig | 4 +-
drivers/sysreset/Makefile | 2 +-
drivers/timer/Kconfig | 4 +-
drivers/timer/mpc83xx_timer.c | 2 +-
drivers/usb/gadget/Makefile | 3 +-
drivers/usb/gadget/fotg210.c | 964 ------
drivers/usb/gadget/gadget_chips.h | 8 -
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/Makefile | 5 -
drivers/usb/host/ehci-armada100.c | 48 -
drivers/usb/host/ehci-faraday.c | 144 -
drivers/usb/host/ehci-hcd.c | 5 -
drivers/usb/host/ehci-rmobile.c | 129 -
drivers/usb/host/ehci-vct.c | 44 -
drivers/usb/host/sl811-hcd.c | 714 -----
drivers/usb/host/sl811.h | 104 -
drivers/usb/host/utmi-armada100.c | 80 -
drivers/video/Makefile | 2 -
drivers/video/exynos/Makefile | 1 -
drivers/video/lg4573.c | 331 --
drivers/video/scf0403_lcd.c | 297 --
drivers/watchdog/Kconfig | 6 +-
drivers/watchdog/Makefile | 2 +-
dts/Kconfig | 4 +-
env/Kconfig | 4 +-
env/Makefile | 1 -
env/env.c | 3 -
env/sata.c | 122 -
include/asm-generic/u-boot.h | 4 +-
include/configs/MPC837XERDB.h | 2 +-
include/configs/P1010RDB.h | 2 +-
include/configs/P2041RDB.h | 2 +-
include/configs/T102xRDB.h | 2 +-
include/configs/T104xRDB.h | 2 +-
include/configs/T208xQDS.h | 2 +-
include/configs/T208xRDB.h | 2 +-
include/configs/T4240RDB.h | 2 +-
include/configs/p1_p2_rdb_pc.h | 2 +-
include/configs/socrates.h | 2 +-
include/e500.h | 2 +-
include/faraday/ftpmu010.h | 234 --
include/fsl_ddr_sdram.h | 2 +-
include/fsl_fman.h | 2 +-
include/ioports.h | 2 +-
include/linux/immap_qe.h | 2 +-
include/linux/mtd/fsl_upm.h | 44 -
include/linux/mtd/fsmc_nand.h | 84 -
include/mpc85xx.h | 6 +-
include/mpc86xx.h | 8 +-
include/netdev.h | 1 -
include/pca9698.h | 17 -
include/pci.h | 2 +-
include/post.h | 4 +-
include/power/fg_battery_cell_params.h | 73 -
include/scf0403_lcd.h | 10 -
include/serial.h | 4 +-
include/usb/fotg210.h | 362 ---
include/usb/fusbh200.h | 59 -
include/watchdog.h | 2 +-
lib/efi_loader/Kconfig | 2 +-
post/Makefile | 2 +-
tools/.gitignore | 1 -
tools/Makefile | 14 +-
tools/moveconfig.py | 334 ++
tools/mxsimage.c | 2 +-
tools/ubsha1.c | 83 -
tools/xway-swap-bytes.c | 38 -
453 files changed, 1508 insertions(+), 17591 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/kona-common/Makefile
delete mode 100644 arch/arm/cpu/armv7/kona-common/clk-stubs.c
delete mode 100644 arch/arm/cpu/armv7/kona-common/hwinit-common.c
delete mode 100644 arch/arm/cpu/armv7/kona-common/reset.S
delete mode 100644 arch/arm/cpu/armv7/kona-common/s_init.c
delete mode 100644 arch/arm/mach-rmobile/cpu_info-sh73a0.c
delete mode 100644 arch/arm/mach-rmobile/include/mach/ehci-rmobile.h
delete mode 100644 arch/arm/mach-rmobile/include/mach/sh73a0-gpio.h
delete mode 100644 arch/arm/mach-rmobile/include/mach/sh73a0.h
delete mode 100644 arch/arm/mach-rmobile/pfc-sh73a0.c
delete mode 100644 arch/arm/mach-rmobile/timer.c
delete mode 100644 arch/powerpc/lib/bat_rw.c
delete mode 100644 board/freescale/common/pixis.c
delete mode 100644 board/freescale/common/pixis.h
delete mode 100644 board/freescale/common/pq-mds-pib.c
delete mode 100644 board/freescale/common/pq-mds-pib.h
delete mode 100644 board/freescale/common/vsc3316_3308.c
delete mode 100644 board/freescale/common/zm7300.c
delete mode 100644 board/freescale/common/zm7300.h
delete mode 100644 board/gdsys/common/fpga.c
delete mode 100644 board/xes/common/actl_nand.c
delete mode 100644 cmd/dataflash_mmc_mux.c
delete mode 100644 cmd/mfsl.c
delete mode 100644 drivers/gpio/adi_gpio2.c
delete mode 100644 drivers/gpio/kona_gpio.c
delete mode 100644 drivers/gpio/mpc83xx_gpio.c
delete mode 100644 drivers/gpio/pca9698.c
delete mode 100644 drivers/i2c/kona_i2c.c
delete mode 100644 drivers/input/twl6030.c
delete mode 100644 drivers/misc/ali512x.c
delete mode 100644 drivers/misc/mc9sdz60.c
delete mode 100644 drivers/mtd/nand/raw/fsl_upm.c
delete mode 100644 drivers/mtd/nand/raw/fsmc_nand.c
delete mode 100644 drivers/mtd/nand/raw/kb9202_nand.c
delete mode 100644 drivers/mtd/nand/raw/nand_plat.c
delete mode 100644 drivers/pci/pci_sh7780.c
delete mode 100644 drivers/power/battery/Makefile
delete mode 100644 drivers/power/battery/bat_trats.c
delete mode 100644 drivers/power/battery/bat_trats2.c
delete mode 100644 drivers/power/ftpmu010.c
delete mode 100644 drivers/power/fuel_gauge/Makefile
delete mode 100644 drivers/power/fuel_gauge/fg_max17042.c
delete mode 100644 drivers/power/mfd/Makefile
delete mode 100644 drivers/power/mfd/fg_max77693.c
delete mode 100644 drivers/power/mfd/muic_max77693.c
delete mode 100644 drivers/power/mfd/pmic_max77693.c
delete mode 100644 drivers/power/pmic/muic_max8997.c
delete mode 100644 drivers/rtc/at91sam9_rtt.c
delete mode 100644 drivers/rtc/ds1302.c
delete mode 100644 drivers/rtc/ds1306.c
delete mode 100644 drivers/rtc/ftrtc010.c
delete mode 100644 drivers/rtc/imxdi.c
delete mode 100644 drivers/rtc/max6900.c
delete mode 100644 drivers/rtc/mk48t59.c
delete mode 100644 drivers/rtc/mx27rtc.c
delete mode 100644 drivers/rtc/rs5c372.c
delete mode 100644 drivers/rtc/s3c24x0_rtc.c
delete mode 100644 drivers/rtc/x1205.c
delete mode 100644 drivers/usb/gadget/fotg210.c
delete mode 100644 drivers/usb/host/ehci-armada100.c
delete mode 100644 drivers/usb/host/ehci-faraday.c
delete mode 100644 drivers/usb/host/ehci-rmobile.c
delete mode 100644 drivers/usb/host/ehci-vct.c
delete mode 100644 drivers/usb/host/sl811-hcd.c
delete mode 100644 drivers/usb/host/sl811.h
delete mode 100644 drivers/usb/host/utmi-armada100.c
delete mode 100644 drivers/video/lg4573.c
delete mode 100644 drivers/video/scf0403_lcd.c
delete mode 100644 env/sata.c
delete mode 100644 include/faraday/ftpmu010.h
delete mode 100644 include/linux/mtd/fsl_upm.h
delete mode 100644 include/linux/mtd/fsmc_nand.h
delete mode 100644 include/pca9698.h
delete mode 100644 include/power/fg_battery_cell_params.h
delete mode 100644 include/scf0403_lcd.h
delete mode 100644 include/usb/fotg210.h
delete mode 100644 include/usb/fusbh200.h
delete mode 100644 tools/ubsha1.c
delete mode 100644 tools/xway-swap-bytes.c
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply [flat|nested] 99+ messages in thread
* [PATCH v2 01/87] moveconfig: Add an option to compare Kconfig against source
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 02/87] power: Drop fg_max77693 Simon Glass
` (86 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
Sometimes the Makefile rules or source code refers to Kconfig options
which don't exist. Update the moveconfig tool to check this and produce
a series of reports about inconsistencies.
This can then be used to generate patches to correct the problems.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
lib/efi_loader/Kconfig | 2 +-
tools/moveconfig.py | 334 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 335 insertions(+), 1 deletion(-)
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index c56904afc2e..9fe9a2df9ea 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -84,7 +84,7 @@ if EFI_VARIABLES_PRESEED
config EFI_VAR_SEED_FILE
string "File with initial values of non-volatile UEFI variables"
- default ubootefi.var
+ default "ubootefi.var"
help
File with initial values of non-volatile UEFI variables. The file must
be in the same format as the storage in the EFI system partition. The
diff --git a/tools/moveconfig.py b/tools/moveconfig.py
index 8f084a6070a..219addd556c 100755
--- a/tools/moveconfig.py
+++ b/tools/moveconfig.py
@@ -93,6 +93,18 @@ SIZES = {
RE_REMOVE_DEFCONFIG = re.compile(r'(.*)_defconfig')
+# CONFIG symbols present in the build system (from Linux) but not actually used
+# in U-Boot; KCONFIG symbols
+IGNORE_SYMS = ['DEBUG_SECTION_MISMATCH', 'FTRACE_MCOUNT_RECORD', 'GCOV_KERNEL',
+ 'GCOV_PROFILE_ALL', 'KALLSYMS', 'KASAN', 'MODVERSIONS', 'SHELL',
+ 'TPL_BUILD', 'VPL_BUILD', 'IS_ENABLED', 'FOO', 'IF_ENABLED_INT',
+ 'IS_ENABLED_', 'IS_ENABLED_1', 'IS_ENABLED_2', 'IS_ENABLED_3',
+ 'SPL_', 'TPL_', 'SPL_FOO', 'TPL_FOO', 'TOOLS_FOO',
+ 'ACME', 'SPL_ACME', 'TPL_ACME', 'TRACE_BRANCH_PROFILING',
+ 'VAL', '_UNDEFINED', 'SPL_BUILD', ]
+
+SPL_PREFIXES = ['SPL_', 'TPL_', 'VPL_', 'TOOLS_']
+
### helper functions ###
def check_top_directory():
"""Exit if we are not at the top of source directory."""
@@ -536,6 +548,7 @@ class KconfigScanner:
os.environ['srctree'] = os.getcwd()
os.environ['UBOOTVERSION'] = 'dummy'
os.environ['KCONFIG_OBJDIR'] = ''
+ os.environ['CC'] = 'gcc'
self.conf = kconfiglib.Kconfig()
@@ -1593,6 +1606,319 @@ def prefix_config(cfg):
return op + cfg
+RE_MK_CONFIGS = re.compile('CONFIG_(\$\(SPL_(?:TPL_)?\))?([A-Z0-9_]*)')
+RE_IFDEF = re.compile('(ifdef|ifndef)')
+RE_C_CONFIGS = re.compile('CONFIG_([A-Z0-9_]*)')
+RE_CONFIG_IS = re.compile('CONFIG_IS_ENABLED\(([A-Z0-9_]*)\)')
+
+class ConfigUse:
+ def __init__(self, cfg, is_spl, fname, rest):
+ self.cfg = cfg
+ self.is_spl = is_spl
+ self.fname = fname
+ self.rest = rest
+
+ def __hash__(self):
+ return hash((self.cfg, self.is_spl))
+
+def scan_makefiles(fnames):
+ """Scan Makefiles looking for Kconfig options
+
+ Looks for uses of CONFIG options in Makefiles
+
+ Args:
+ fnames (list of tuple):
+ str: Makefile filename where the option was found
+ str: Line of the Makefile
+
+ Returns:
+ tuple:
+ dict: all_uses
+ key (ConfigUse): object
+ value (list of str): matching lines
+ dict: Uses by filename
+ key (str): filename
+ value (set of ConfigUse): uses in that filename
+
+ >>> RE_MK_CONFIGS.search('CONFIG_FRED').groups()
+ (None, 'FRED')
+ >>> RE_MK_CONFIGS.search('CONFIG_$(SPL_)MARY').groups()
+ ('$(SPL_)', 'MARY')
+ >>> RE_MK_CONFIGS.search('CONFIG_$(SPL_TPL_)MARY').groups()
+ ('$(SPL_TPL_)', 'MARY')
+ """
+ all_uses = collections.defaultdict(list)
+ fname_uses = {}
+ for fname, rest in fnames:
+ m_iter = RE_MK_CONFIGS.finditer(rest)
+ found = False
+ for m in m_iter:
+ found = True
+ real_opt = m.group(2)
+ if real_opt == '':
+ continue
+ is_spl = False
+ if m.group(1):
+ is_spl = True
+ use = ConfigUse(real_opt, is_spl, fname, rest)
+ if fname not in fname_uses:
+ fname_uses[fname] = set()
+ fname_uses[fname].add(use)
+ all_uses[use].append(rest)
+ return all_uses, fname_uses
+
+
+def scan_src_files(fnames):
+ """Scan source files (other than Makefiles) looking for Kconfig options
+
+ Looks for uses of CONFIG options
+
+ Args:
+ fnames (list of tuple):
+ str: Makefile filename where the option was found
+ str: Line of the Makefile
+
+ Returns:
+ tuple:
+ dict: all_uses
+ key (ConfigUse): object
+ value (list of str): matching lines
+ dict: Uses by filename
+ key (str): filename
+ value (set of ConfigUse): uses in that filename
+
+ >>> RE_C_CONFIGS.search('CONFIG_FRED').groups()
+ ('FRED',)
+ >>> RE_CONFIG_IS.search('CONFIG_IS_ENABLED(MARY)').groups()
+ ('MARY',)
+ >>> RE_CONFIG_IS.search('#if CONFIG_IS_ENABLED(OF_PLATDATA)').groups()
+ ('OF_PLATDATA',)
+ """
+ def add_uses(m_iter, is_spl):
+ for m in m_iter:
+ found = True
+ real_opt = m.group(1)
+ if real_opt == '':
+ continue
+ use = ConfigUse(real_opt, is_spl, fname, rest)
+ if fname not in fname_uses:
+ fname_uses[fname] = set()
+ fname_uses[fname].add(use)
+ all_uses[use].append(rest)
+
+ all_uses = collections.defaultdict(list)
+ fname_uses = {}
+ for fname, rest in fnames:
+ m_iter = RE_C_CONFIGS.finditer(rest)
+ add_uses(m_iter, False)
+
+ m_iter2 = RE_CONFIG_IS.finditer(rest)
+ add_uses(m_iter2, True)
+
+ return all_uses, fname_uses
+
+
+MODE_NORMAL, MODE_SPL, MODE_PROPER = range(3)
+
+def do_scan_source(path, do_update):
+ """Scan the source tree for Kconfig inconsistencies
+
+ Args:
+ path (str): Path to source tree
+ do_update (bool) : True to write to scripts/kconf_... files
+ """
+ def is_not_proper(name):
+ for prefix in SPL_PREFIXES:
+ if name.startswith(prefix):
+ return name[len(prefix):]
+ return False
+
+ def check_not_found(all_uses, spl_mode):
+ """Check for Kconfig options mentioned in the source but not in Kconfig
+
+ Args:
+ all_uses (dict):
+ key (ConfigUse): object
+ value (list of str): matching lines
+ spl_mode (int): If MODE_SPL, look at source code which implies
+ an SPL_ option, but for which there is none;
+ for MOD_PROPER, look at source code which implies a Proper
+ option (i.e. use of CONFIG_IS_ENABLED() or $(SPL_) or
+ $(SPL_TPL_) but for which there none;
+ if MODE_NORMAL, ignore SPL
+
+ Returns:
+ dict:
+ key (str): CONFIG name (without 'CONFIG_' prefix
+ value (list of ConfigUse): List of uses of this CONFIG
+ """
+ # Make sure we know about all the options
+ not_found = collections.defaultdict(list)
+ for use, rest in all_uses.items():
+ name = use.cfg
+ if name in IGNORE_SYMS:
+ continue
+ check = True
+
+ if spl_mode == MODE_SPL:
+ check = use.is_spl
+
+ # If it is an SPL symbol, try prepending all SPL_ prefixes to
+ # find at least one SPL symbol
+ if use.is_spl:
+ add_to_dict = False
+ for prefix in SPL_PREFIXES:
+ try_name = prefix + name
+ sym = kconf.syms.get(try_name)
+ if sym:
+ break
+ if not sym:
+ not_found[f'SPL_{name}'].append(use)
+ continue
+ elif spl_mode == MODE_PROPER:
+ # Try to find the Proper version of this symbol, i.e. without
+ # the SPL_ prefix
+ proper_name = is_not_proper(name)
+ if proper_name:
+ name = proper_name
+ elif not use.is_spl:
+ check = False
+ else: # MODE_NORMAL
+ debug = False
+ sym = kconf.syms.get(name)
+ if not sym:
+ proper_name = is_not_proper(name)
+ if proper_name:
+ name = proper_name
+ sym = kconf.syms.get(name)
+ if not sym:
+ for prefix in SPL_PREFIXES:
+ try_name = prefix + name
+ sym = kconf.syms.get(try_name)
+ if sym:
+ break
+ if not sym:
+ not_found[name].append(use)
+ continue
+
+ sym = kconf.syms.get(name)
+ if not sym and check:
+ not_found[name].append(use)
+ return not_found
+
+ def show_uses(uses):
+ """Show a list of uses along with their filename and code snippet
+
+ Args:
+ uses (dict):
+ key (str): CONFIG name (without 'CONFIG_' prefix
+ value (list of ConfigUse): List of uses of this CONFIG
+ """
+ for name in sorted(uses):
+ print(f'{name}: ', end='')
+ for i, use in enumerate(uses[name]):
+ print(f'{" " if i else ""}{use.fname}: {use.rest.strip()}')
+
+
+ print('Scanning Kconfig')
+ kconf = KconfigScanner().conf
+ print(f'Scanning source in {path}')
+ args = ['git', 'grep', '-E', r'IS_ENABLED|\bCONFIG']
+ with subprocess.Popen(args, stdout=subprocess.PIPE) as proc:
+ out, err = proc.communicate()
+ lines = out.splitlines()
+ re_fname = re.compile('^([^:]*):(.*)')
+ src_list = []
+ mk_list = []
+ for line in lines:
+ linestr = line.decode('utf-8')
+ m_fname = re_fname.search(linestr)
+ if not m_fname:
+ continue
+ fname, rest = m_fname.groups()
+ dirname, leaf = os.path.split(fname)
+ root, ext = os.path.splitext(leaf)
+ if ext == '.autoconf':
+ pass
+ elif ext in ['.c', '.h', '.S', '.lds', '.dts', '.dtsi', '.asl', '.cfg',
+ '.env', '.tmpl']:
+ src_list.append([fname, rest])
+ elif 'Makefile' in root or ext == '.mk':
+ mk_list.append([fname, rest])
+ elif ext in ['.yml', '.sh', '.py', '.awk', '.pl', '.rst', '', '.sed']:
+ pass
+ elif 'Kconfig' in root or 'Kbuild' in root:
+ pass
+ elif 'README' in root:
+ pass
+ elif dirname in ['configs']:
+ pass
+ elif dirname.startswith('doc') or dirname.startswith('scripts/kconfig'):
+ pass
+ else:
+ print(f'Not sure how to handle file {fname}')
+
+ # Scan the Makefiles
+ all_uses, fname_uses = scan_makefiles(mk_list)
+
+ spl_not_found = set()
+ proper_not_found = set()
+
+ # Make sure we know about all the options
+ print('\nCONFIG options present in Makefiles but not Kconfig:')
+ not_found = check_not_found(all_uses, MODE_NORMAL)
+ show_uses(not_found)
+
+ print('\nCONFIG options present in Makefiles but not Kconfig (SPL):')
+ not_found = check_not_found(all_uses, MODE_SPL)
+ show_uses(not_found)
+ spl_not_found |= set([is_not_proper(key) or key for key in not_found.keys()])
+
+ print('\nCONFIG options used as Proper in Makefiles but without a non-SPL_ variant:')
+ not_found = check_not_found(all_uses, MODE_PROPER)
+ show_uses(not_found)
+ proper_not_found |= set([key for key in not_found.keys()])
+
+ # Scan the source code
+ all_uses, fname_uses = scan_src_files(src_list)
+
+ # Make sure we know about all the options
+ print('\nCONFIG options present in source but not Kconfig:')
+ not_found = check_not_found(all_uses, MODE_NORMAL)
+ show_uses(not_found)
+
+ print('\nCONFIG options present in source but not Kconfig (SPL):')
+ not_found = check_not_found(all_uses, MODE_SPL)
+ show_uses(not_found)
+ spl_not_found |= set([is_not_proper(key) or key for key in not_found.keys()])
+
+ print('\nCONFIG options used as Proper in source but without a non-SPL_ variant:')
+ not_found = check_not_found(all_uses, MODE_PROPER)
+ show_uses(not_found)
+ proper_not_found |= set([key for key in not_found.keys()])
+
+ print('\nCONFIG options used as SPL but without an SPL_ variant:')
+ for item in sorted(spl_not_found):
+ print(f' {item}')
+
+ print('\nCONFIG options used as Proper but without a non-SPL_ variant:')
+ for item in sorted(proper_not_found):
+ print(f' {item}')
+
+ # Write out the updated information
+ if do_update:
+ with open(os.path.join(path, 'scripts', 'conf_nospl'), 'w') as out:
+ print('# These options should not be enabled in SPL builds\n',
+ file=out)
+ for item in sorted(spl_not_found):
+ print(item, file=out)
+ with open(os.path.join(path, 'scripts', 'conf_noproper'), 'w') as out:
+ print('# These options should not be enabled in Proper builds\n',
+ file=out)
+ for item in sorted(proper_not_found):
+ print(item, file=out)
+
+
def main():
try:
cpu_count = multiprocessing.cpu_count()
@@ -1642,10 +1968,14 @@ doc/develop/moveconfig.rst for documentation.'''
help='force sync by savedefconfig')
parser.add_argument('-S', '--spl', action='store_true', default=False,
help='parse config options defined for SPL build')
+ parser.add_argument('--scan-source', action='store_true', default=False,
+ help='scan source for uses of CONFIG options')
parser.add_argument('-t', '--test', action='store_true', default=False,
help='run unit tests')
parser.add_argument('-y', '--yes', action='store_true', default=False,
help="respond 'yes' to any prompts")
+ parser.add_argument('-u', '--update', action='store_true', default=False,
+ help="update scripts/ files (use with --scan-source)")
parser.add_argument('-v', '--verbose', action='store_true', default=False,
help='show any build errors as boards are built')
parser.add_argument('configs', nargs='*')
@@ -1660,6 +1990,10 @@ doc/develop/moveconfig.rst for documentation.'''
return 1
unittest.main()
+ if args.scan_source:
+ do_scan_source(os.getcwd(), args.update)
+ return
+
if not any((len(configs), args.force_sync, args.build_db, args.imply,
args.find)):
parser.print_usage()
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 02/87] power: Drop fg_max77693
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
2023-01-29 0:57 ` [PATCH v2 01/87] moveconfig: Add an option to compare Kconfig against source Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 03/87] nand: Drop CONFIG_NAND_SPEAR Simon Glass
` (85 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Lukasz Majewski
This is not used in U-Boot. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/power/mfd/Makefile | 1 -
drivers/power/mfd/fg_max77693.c | 137 --------------------------------
2 files changed, 138 deletions(-)
delete mode 100644 drivers/power/mfd/fg_max77693.c
diff --git a/drivers/power/mfd/Makefile b/drivers/power/mfd/Makefile
index a8eb7f81e72..5dfbdbd1b0f 100644
--- a/drivers/power/mfd/Makefile
+++ b/drivers/power/mfd/Makefile
@@ -5,4 +5,3 @@
obj-$(CONFIG_POWER_PMIC_MAX77693) += pmic_max77693.o
obj-$(CONFIG_POWER_MUIC_MAX77693) += muic_max77693.o
-obj-$(CONFIG_POWER_FG_MAX77693) += fg_max77693.o
diff --git a/drivers/power/mfd/fg_max77693.c b/drivers/power/mfd/fg_max77693.c
deleted file mode 100644
index 983a6d4a2bd..00000000000
--- a/drivers/power/mfd/fg_max77693.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013 Samsung Electronics
- * Piotr Wilczek <p.wilczek@samsung.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <power/pmic.h>
-#include <power/max77693_fg.h>
-#include <i2c.h>
-#include <power/power_chrg.h>
-#include <power/battery.h>
-#include <power/fg_battery_cell_params.h>
-#include <errno.h>
-
-static int max77693_get_vcell(u32 *vcell)
-{
- u16 value;
- u8 ret;
-
- ret = i2c_read(MAX77693_FUEL_I2C_ADDR, MAX77693_VCELL, 1,
- (u8 *)&value, 2);
- if (ret)
- return ret;
-
- *vcell = (u32)(value >> 3);
- *vcell = *vcell * 625;
-
- return 0;
-}
-
-static int max77693_get_soc(u32 *soc)
-{
- u16 value;
- u8 ret;
-
- ret = i2c_read(MAX77693_FUEL_I2C_ADDR, MAX77693_VFSOC, 1,
- (u8 *)&value, 2);
- if (ret)
- return ret;
-
- *soc = (u32)(value >> 8);
-
- return 0;
-}
-
-static int power_update_battery(struct pmic *p, struct pmic *bat)
-{
- struct power_battery *pb = bat->pbat;
- int ret;
-
- if (pmic_probe(p)) {
- puts("Can't find max77693 fuel gauge\n");
- return -ENODEV;
- }
-
- ret = max77693_get_soc(&pb->bat->state_of_chrg);
- if (ret)
- return ret;
-
- max77693_get_vcell(&pb->bat->voltage_uV);
-
- return 0;
-}
-
-static int power_check_battery(struct pmic *p, struct pmic *bat)
-{
- struct power_battery *pb = bat->pbat;
- unsigned int val;
- int ret = 0;
-
- if (pmic_probe(p)) {
- puts("Can't find max77693 fuel gauge\n");
- return -ENODEV;
- }
-
- ret = pmic_reg_read(p, MAX77693_STATUS, &val);
- if (ret)
- return ret;
- debug("fg status: 0x%x\n", val);
-
- ret = pmic_reg_read(p, MAX77693_VERSION, &pb->bat->version);
- if (ret)
- return ret;
-
- ret = power_update_battery(p, bat);
- if (ret)
- return ret;
- debug("fg ver: 0x%x\n", pb->bat->version);
- printf("BAT: state_of_charge(SOC):%d%%\n",
- pb->bat->state_of_chrg);
-
- printf(" voltage: %d.%6.6d [V] (expected to be %d [mAh])\n",
- pb->bat->voltage_uV / 1000000,
- pb->bat->voltage_uV % 1000000,
- pb->bat->capacity);
-
- if (pb->bat->voltage_uV > 3850000)
- pb->bat->state = EXT_SOURCE;
- else if (pb->bat->voltage_uV < 3600000 || pb->bat->state_of_chrg < 5)
- pb->bat->state = CHARGE;
- else
- pb->bat->state = NORMAL;
-
- return 0;
-}
-
-static struct power_fg power_fg_ops = {
- .fg_battery_check = power_check_battery,
- .fg_battery_update = power_update_battery,
-};
-
-int power_fg_init(unsigned char bus)
-{
- static const char name[] = "MAX77693_FG";
- struct pmic *p = pmic_alloc();
-
- if (!p) {
- printf("%s: POWER allocation error!\n", __func__);
- return -ENOMEM;
- }
-
- debug("Board Fuel Gauge init\n");
-
- p->name = name;
- p->interface = PMIC_I2C;
- p->number_of_regs = FG_NUM_OF_REGS;
- p->hw.i2c.addr = MAX77693_FUEL_I2C_ADDR;
- p->hw.i2c.tx_num = 2;
- p->sensor_byte_order = PMIC_SENSOR_BYTE_ORDER_BIG;
- p->bus = bus;
-
- p->fg = &power_fg_ops;
-
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 03/87] nand: Drop CONFIG_NAND_SPEAR
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
2023-01-29 0:57 ` [PATCH v2 01/87] moveconfig: Add an option to compare Kconfig against source Simon Glass
2023-01-29 0:57 ` [PATCH v2 02/87] power: Drop fg_max77693 Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 04/87] power: Drop pmic_max77693.c Simon Glass
` (84 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Michael Trimarchi
This is not used anymore. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
---
(no changes since v1)
drivers/mtd/nand/raw/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 7320d581e2f..4c59903aa8c 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -70,7 +70,6 @@ obj-$(CONFIG_NAND_MXS_DT) += mxs_nand_dt.o
obj-$(CONFIG_NAND_OCTEONTX) += octeontx_nand.o
obj-$(CONFIG_NAND_OCTEONTX_HW_ECC) += octeontx_bch.o
obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
-obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 04/87] power: Drop pmic_max77693.c
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (2 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 03/87] nand: Drop CONFIG_NAND_SPEAR Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 05/87] gpio: Drop adi_gpio2 Simon Glass
` (83 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Lukasz Majewski
Drop this driver and the associated CONFIG option, as it is not used.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/power/mfd/Makefile | 1 -
drivers/power/mfd/pmic_max77693.c | 96 -------------------------------
2 files changed, 97 deletions(-)
delete mode 100644 drivers/power/mfd/pmic_max77693.c
diff --git a/drivers/power/mfd/Makefile b/drivers/power/mfd/Makefile
index 5dfbdbd1b0f..b5ec8f00bb0 100644
--- a/drivers/power/mfd/Makefile
+++ b/drivers/power/mfd/Makefile
@@ -3,5 +3,4 @@
# Copyright (C) 2013 Samsung Electronics
# Piotr Wilczek <p.wilczek@samsung.com>
-obj-$(CONFIG_POWER_PMIC_MAX77693) += pmic_max77693.o
obj-$(CONFIG_POWER_MUIC_MAX77693) += muic_max77693.o
diff --git a/drivers/power/mfd/pmic_max77693.c b/drivers/power/mfd/pmic_max77693.c
deleted file mode 100644
index e32a9722a40..00000000000
--- a/drivers/power/mfd/pmic_max77693.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013 Samsung Electronics
- * Piotr Wilczek <p.wilczek@samsung.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <power/pmic.h>
-#include <power/max77693_pmic.h>
-#include <i2c.h>
-#include <errno.h>
-
-static int max77693_charger_state(struct pmic *p, int state, int current)
-{
- unsigned int val;
-
- if (pmic_probe(p))
- return -ENODEV;
-
- /* unlock write capability */
- val = MAX77693_CHG_UNLOCK;
- pmic_reg_write(p, MAX77693_CHG_CNFG_06, val);
-
- if (state == PMIC_CHARGER_DISABLE) {
- puts("Disable the charger.\n");
- pmic_reg_read(p, MAX77693_CHG_CNFG_00, &val);
- val &= ~0x01;
- pmic_reg_write(p, MAX77693_CHG_CNFG_00, val);
- return -ENOTSUPP;
- }
-
- if (current < CHARGER_MIN_CURRENT || current > CHARGER_MAX_CURRENT) {
- printf("%s: Wrong charge current: %d [mA]\n",
- __func__, current);
- return -EINVAL;
- }
-
- /* set charging current */
- pmic_reg_read(p, MAX77693_CHG_CNFG_02, &val);
- val &= ~MAX77693_CHG_CC;
- val |= current * 10 / 333; /* 0.1A/3 steps */
- pmic_reg_write(p, MAX77693_CHG_CNFG_02, val);
-
- /* enable charging */
- val = MAX77693_CHG_MODE_ON;
- pmic_reg_write(p, MAX77693_CHG_CNFG_00, val);
-
- /* check charging current */
- pmic_reg_read(p, MAX77693_CHG_CNFG_02, &val);
- val &= 0x3f;
- printf("Enable the charger @ %d [mA]\n", val * 333 / 10);
-
- return 0;
-}
-
-static int max77693_charger_bat_present(struct pmic *p)
-{
- unsigned int val;
-
- if (pmic_probe(p))
- return -ENODEV;
-
- pmic_reg_read(p, MAX77693_CHG_INT_OK, &val);
-
- return !(val & MAX77693_CHG_DETBAT);
-}
-
-static struct power_chrg power_chrg_pmic_ops = {
- .chrg_bat_present = max77693_charger_bat_present,
- .chrg_state = max77693_charger_state,
-};
-
-int pmic_init_max77693(unsigned char bus)
-{
- static const char name[] = "MAX77693_PMIC";
- struct pmic *p = pmic_alloc();
-
- if (!p) {
- printf("%s: POWER allocation error!\n", __func__);
- return -ENOMEM;
- }
-
- debug("Board PMIC init\n");
-
- p->name = name;
- p->interface = PMIC_I2C;
- p->number_of_regs = PMIC_NUM_OF_REGS;
- p->hw.i2c.addr = MAX77693_PMIC_I2C_ADDR;
- p->hw.i2c.tx_num = 1;
- p->bus = bus;
-
- p->chrg = &power_chrg_pmic_ops;
-
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 05/87] gpio: Drop adi_gpio2
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (3 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 04/87] power: Drop pmic_max77693.c Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 06/87] Makefile: Drop CONFIG_AIS_CONFIG_FILE Simon Glass
` (82 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
Drop this unused driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/gpio/Makefile | 1 -
drivers/gpio/adi_gpio2.c | 425 ---------------------------------------
2 files changed, 426 deletions(-)
delete mode 100644 drivers/gpio/adi_gpio2.c
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 7235714fcc0..57603645c1c 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -47,7 +47,6 @@ obj-$(CONFIG_SH_GPIO_PFC) += sh_pfc.o
obj-$(CONFIG_OMAP_GPIO) += omap_gpio.o
obj-$(CONFIG_BCM2835_GPIO) += bcm2835_gpio.o
obj-$(CONFIG_XILINX_GPIO) += xilinx_gpio.o
-obj-$(CONFIG_ADI_GPIO2) += adi_gpio2.o
obj-$(CONFIG_TCA642X) += tca642x.o
obj-$(CONFIG_SUNXI_GPIO) += sunxi_gpio.o
obj-$(CONFIG_LPC32XX_GPIO) += lpc32xx_gpio.o
diff --git a/drivers/gpio/adi_gpio2.c b/drivers/gpio/adi_gpio2.c
deleted file mode 100644
index d0849c85c3b..00000000000
--- a/drivers/gpio/adi_gpio2.c
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * ADI GPIO2 Abstraction Layer
- * Support BF54x, BF60x and future processors.
- *
- * Copyright 2008-2013 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <linux/bug.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-
-#define RESOURCE_LABEL_SIZE 16
-
-static struct str_ident {
- char name[RESOURCE_LABEL_SIZE];
-} str_ident[MAX_RESOURCES];
-
-static void gpio_error(unsigned gpio)
-{
- printf("adi_gpio2: GPIO %d wasn't requested!\n", gpio);
-}
-
-static void set_label(unsigned short ident, const char *label)
-{
- if (label) {
- strncpy(str_ident[ident].name, label,
- RESOURCE_LABEL_SIZE);
- str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
- }
-}
-
-static char *get_label(unsigned short ident)
-{
- return *str_ident[ident].name ? str_ident[ident].name : "UNKNOWN";
-}
-
-static int cmp_label(unsigned short ident, const char *label)
-{
- if (label == NULL)
- printf("adi_gpio2: please provide none-null label\n");
-
- if (label)
- return strcmp(str_ident[ident].name, label);
- else
- return -EINVAL;
-}
-
-#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)]
-#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
-#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i))
-#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i))
-#define DECLARE_RESERVED_MAP(m, c) unsigned short reserved_##m##_map[c]
-
-static DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
-static DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES));
-
-inline int check_gpio(unsigned gpio)
-{
-#if defined(CONFIG_BF54x)
- if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 ||
- gpio == GPIO_PH14 || gpio == GPIO_PH15 ||
- gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
- return -EINVAL;
-#endif
- if (gpio >= MAX_GPIOS)
- return -EINVAL;
- return 0;
-}
-
-static void port_setup(unsigned gpio, unsigned short usage)
-{
-#if defined(CONFIG_BF54x)
- if (usage == GPIO_USAGE)
- gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
- else
- gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
-#else
- if (usage == GPIO_USAGE)
- gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio);
- else
- gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio);
-#endif
-}
-
-inline void portmux_setup(unsigned short per)
-{
- u32 pmux;
- u16 ident = P_IDENT(per);
- u16 function = P_FUNCT2MUX(per);
-
- pmux = gpio_array[gpio_bank(ident)]->port_mux;
-
- pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
- pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
-
- gpio_array[gpio_bank(ident)]->port_mux = pmux;
-}
-
-inline u16 get_portmux(unsigned short per)
-{
- u32 pmux;
- u16 ident = P_IDENT(per);
-
- pmux = gpio_array[gpio_bank(ident)]->port_mux;
-
- return pmux >> (2 * gpio_sub_n(ident)) & 0x3;
-}
-
-unsigned short get_gpio_dir(unsigned gpio)
-{
- return 0x01 &
- (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio));
-}
-
-/***********************************************************
-*
-* FUNCTIONS: Peripheral Resource Allocation
-* and PortMux Setup
-*
-* INPUTS/OUTPUTS:
-* per Peripheral Identifier
-* label String
-*
-* DESCRIPTION: Peripheral Resource Allocation and Setup API
-**************************************************************/
-
-int peripheral_request(unsigned short per, const char *label)
-{
- unsigned short ident = P_IDENT(per);
-
- /*
- * Don't cares are pins with only one dedicated function
- */
-
- if (per & P_DONTCARE)
- return 0;
-
- if (!(per & P_DEFINED))
- return -EINVAL;
-
- BUG_ON(ident >= MAX_RESOURCES);
-
- /* If a pin can be muxed as either GPIO or peripheral, make
- * sure it is not already a GPIO pin when we request it.
- */
- if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
- printf("%s: Peripheral %d is already reserved as GPIO by %s!\n",
- __func__, ident, get_label(ident));
- return -EBUSY;
- }
-
- if (unlikely(is_reserved(peri, ident, 1))) {
- /*
- * Pin functions like AMC address strobes my
- * be requested and used by several drivers
- */
-
- if (!((per & P_MAYSHARE) &&
- get_portmux(per) == P_FUNCT2MUX(per))) {
- /*
- * Allow that the identical pin function can
- * be requested from the same driver twice
- */
-
- if (cmp_label(ident, label) == 0)
- goto anyway;
-
- printf("%s: Peripheral %d function %d is already "
- "reserved by %s!\n", __func__, ident,
- P_FUNCT2MUX(per), get_label(ident));
- return -EBUSY;
- }
- }
-
- anyway:
- reserve(peri, ident);
-
- portmux_setup(per);
- port_setup(ident, PERIPHERAL_USAGE);
-
- set_label(ident, label);
-
- return 0;
-}
-
-int peripheral_request_list(const unsigned short per[], const char *label)
-{
- u16 cnt;
- int ret;
-
- for (cnt = 0; per[cnt] != 0; cnt++) {
- ret = peripheral_request(per[cnt], label);
-
- if (ret < 0) {
- for (; cnt > 0; cnt--)
- peripheral_free(per[cnt - 1]);
-
- return ret;
- }
- }
-
- return 0;
-}
-
-void peripheral_free(unsigned short per)
-{
- unsigned short ident = P_IDENT(per);
-
- if (per & P_DONTCARE)
- return;
-
- if (!(per & P_DEFINED))
- return;
-
- if (unlikely(!is_reserved(peri, ident, 0)))
- return;
-
- if (!(per & P_MAYSHARE))
- port_setup(ident, GPIO_USAGE);
-
- unreserve(peri, ident);
-
- set_label(ident, "free");
-}
-
-void peripheral_free_list(const unsigned short per[])
-{
- u16 cnt;
- for (cnt = 0; per[cnt] != 0; cnt++)
- peripheral_free(per[cnt]);
-}
-
-/***********************************************************
-*
-* FUNCTIONS: GPIO Driver
-*
-* INPUTS/OUTPUTS:
-* gpio PIO Number between 0 and MAX_GPIOS
-* label String
-*
-* DESCRIPTION: GPIO Driver API
-**************************************************************/
-
-int gpio_request(unsigned gpio, const char *label)
-{
- if (check_gpio(gpio) < 0)
- return -EINVAL;
-
- /*
- * Allow that the identical GPIO can
- * be requested from the same driver twice
- * Do nothing and return -
- */
-
- if (cmp_label(gpio, label) == 0)
- return 0;
-
- if (unlikely(is_reserved(gpio, gpio, 1))) {
- printf("adi_gpio2: GPIO %d is already reserved by %s!\n",
- gpio, get_label(gpio));
- return -EBUSY;
- }
- if (unlikely(is_reserved(peri, gpio, 1))) {
- printf("adi_gpio2: GPIO %d is already reserved as Peripheral "
- "by %s!\n", gpio, get_label(gpio));
- return -EBUSY;
- }
-
- reserve(gpio, gpio);
- set_label(gpio, label);
-
- port_setup(gpio, GPIO_USAGE);
-
- return 0;
-}
-
-int gpio_free(unsigned gpio)
-{
- if (check_gpio(gpio) < 0)
- return -1;
-
- if (unlikely(!is_reserved(gpio, gpio, 0))) {
- gpio_error(gpio);
- return -1;
- }
-
- unreserve(gpio, gpio);
-
- set_label(gpio, "free");
-
- return 0;
-}
-
-#ifdef ADI_SPECIAL_GPIO_BANKS
-static DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
-
-int special_gpio_request(unsigned gpio, const char *label)
-{
- /*
- * Allow that the identical GPIO can
- * be requested from the same driver twice
- * Do nothing and return -
- */
-
- if (cmp_label(gpio, label) == 0)
- return 0;
-
- if (unlikely(is_reserved(special_gpio, gpio, 1))) {
- printf("adi_gpio2: GPIO %d is already reserved by %s!\n",
- gpio, get_label(gpio));
- return -EBUSY;
- }
- if (unlikely(is_reserved(peri, gpio, 1))) {
- printf("adi_gpio2: GPIO %d is already reserved as Peripheral "
- "by %s!\n", gpio, get_label(gpio));
-
- return -EBUSY;
- }
-
- reserve(special_gpio, gpio);
- reserve(peri, gpio);
-
- set_label(gpio, label);
- port_setup(gpio, GPIO_USAGE);
-
- return 0;
-}
-
-void special_gpio_free(unsigned gpio)
-{
- if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
- gpio_error(gpio);
- return;
- }
-
- unreserve(special_gpio, gpio);
- unreserve(peri, gpio);
- set_label(gpio, "free");
-}
-#endif
-
-static inline void __gpio_direction_input(unsigned gpio)
-{
- gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
-#if defined(CONFIG_BF54x)
- gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
-#else
- gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio);
-#endif
-}
-
-int gpio_direction_input(unsigned gpio)
-{
- unsigned long flags;
-
- if (!is_reserved(gpio, gpio, 0)) {
- gpio_error(gpio);
- return -EINVAL;
- }
-
- local_irq_save(flags);
- __gpio_direction_input(gpio);
- local_irq_restore(flags);
-
- return 0;
-}
-
-int gpio_set_value(unsigned gpio, int arg)
-{
- if (arg)
- gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
- else
- gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
-
- return 0;
-}
-
-int gpio_direction_output(unsigned gpio, int value)
-{
- unsigned long flags;
-
- if (!is_reserved(gpio, gpio, 0)) {
- gpio_error(gpio);
- return -EINVAL;
- }
-
- local_irq_save(flags);
-
-#if defined(CONFIG_BF54x)
- gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
-#else
- gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio);
-#endif
- gpio_set_value(gpio, value);
- gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-int gpio_get_value(unsigned gpio)
-{
- return 1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
-}
-
-void gpio_labels(void)
-{
- int c, gpio;
-
- for (c = 0; c < MAX_RESOURCES; c++) {
- gpio = is_reserved(gpio, c, 1);
- if (!check_gpio(c) && gpio)
- printf("GPIO_%d:\t%s\tGPIO %s\n", c, get_label(c),
- get_gpio_dir(c) ? "OUTPUT" : "INPUT");
- else if (is_reserved(peri, c, 1))
- printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c));
- else
- continue;
- }
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 06/87] Makefile: Drop CONFIG_AIS_CONFIG_FILE
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (4 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 05/87] gpio: Drop adi_gpio2 Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 07/87] misc: Drop ali512x Simon Glass
` (81 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Masahiro Yamada
This is not defined anywhere. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index 9c38cc29e9d..debe691c39e 100644
--- a/Makefile
+++ b/Makefile
@@ -1528,8 +1528,7 @@ MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_TEXT_BASE)
u-boot.ubl: u-boot-with-spl.bin FORCE
$(call if_changed,mkimage)
-MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
- $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
+MKIMAGEFLAGS_u-boot-spl.ais = -s -n "/dev/null" \
-T aisimage -e $(CONFIG_SPL_TEXT_BASE)
spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 07/87] misc: Drop ali512x
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (5 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 06/87] Makefile: Drop CONFIG_AIS_CONFIG_FILE Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 08/87] sandbox: Drop reference to CONFIG_ARCH_DEVICE_TREE Simon Glass
` (80 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
Drop this unused driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/misc/Makefile | 1 -
drivers/misc/ali512x.c | 401 -----------------------------------------
2 files changed, 402 deletions(-)
delete mode 100644 drivers/misc/ali512x.c
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d494639cd95..2de510329d8 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -29,7 +29,6 @@ ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SANDBOX) += spltest_sandbox.o
endif
endif
-obj-$(CONFIG_ALI152X) += ali512x.o
obj-$(CONFIG_ALTERA_SYSID) += altera_sysid.o
obj-$(CONFIG_ATSHA204A) += atsha204a-i2c.o
obj-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o
diff --git a/drivers/misc/ali512x.c b/drivers/misc/ali512x.c
deleted file mode 100644
index e714e28bdc3..00000000000
--- a/drivers/misc/ali512x.c
+++ /dev/null
@@ -1,401 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
- */
-
-/*
- * Based on sc520cdp.c from rolo 1.6:
- *----------------------------------------------------------------------
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions GmbH
- * Klein-Winternheim, Germany
- *----------------------------------------------------------------------
- */
-
-#include <config.h>
-
-#include <common.h>
-#include <asm/io.h>
-#include <ali512x.h>
-
-
-/* ALI M5123 Logical device numbers:
- * 0 FDC
- * 1 unused?
- * 2 unused?
- * 3 lpt
- * 4 UART1
- * 5 UART2
- * 6 RTC
- * 7 mouse/kbd
- * 8 CIO
- */
-
-/*
- ************************************************************
- * Some access primitives for the ALi chip: *
- ************************************************************
- */
-
-static void ali_write(u8 index, u8 value)
-{
- /* write an arbirary register */
- outb(index, ALI_INDEX);
- outb(value, ALI_DATA);
-}
-
-#if 0
-static int ali_read(u8 index)
-{
- outb(index, ALI_INDEX);
- return inb(ALI_DATA);
-}
-#endif
-
-#define ALI_OPEN() \
- outb(0x51, ALI_INDEX); \
- outb(0x23, ALI_INDEX)
-
-
-#define ALI_CLOSE() \
- outb(0xbb, ALI_INDEX)
-
-/* Select a logical device */
-#define ALI_SELDEV(dev) \
- ali_write(0x07, dev)
-
-
-void ali512x_init(void)
-{
- ALI_OPEN();
-
- ali_write(0x02, 0x01); /* soft reset */
- ali_write(0x03, 0x03); /* disable access to CIOs */
- ali_write(0x22, 0x00); /* disable direct powerdown */
- ali_write(0x23, 0x00); /* disable auto powerdown */
- ali_write(0x24, 0x00); /* IR 8 is active hi, pin26 is PDIR */
-
- ALI_CLOSE();
-}
-
-void ali512x_set_fdc(int enabled, u16 io, u8 irq, u8 dma_channel)
-{
- ALI_OPEN();
- ALI_SELDEV(0);
-
- ali_write(0x30, enabled?1:0);
- if (enabled) {
- ali_write(0x60, io >> 8);
- ali_write(0x61, io & 0xff);
- ali_write(0x70, irq);
- ali_write(0x74, dma_channel);
-
- /* AT mode, no drive swap */
- ali_write(0xf0, 0x08);
- ali_write(0xf1, 0x00);
- ali_write(0xf2, 0xff);
- ali_write(0xf4, 0x00);
- }
- ALI_CLOSE();
-}
-
-
-void ali512x_set_pp(int enabled, u16 io, u8 irq, u8 dma_channel)
-{
- ALI_OPEN();
- ALI_SELDEV(3);
-
- ali_write(0x30, enabled?1:0);
- if (enabled) {
- ali_write(0x60, io >> 8);
- ali_write(0x61, io & 0xff);
- ali_write(0x70, irq);
- ali_write(0x74, dma_channel);
-
- /* mode: EPP 1.9, ECP FIFO threshold = 7, IRQ active low */
- ali_write(0xf0, 0xbc);
- /* 12 MHz, Burst DMA in ECP */
- ali_write(0xf1, 0x05);
- }
- ALI_CLOSE();
-
-}
-
-void ali512x_set_uart(int enabled, int index, u16 io, u8 irq)
-{
- ALI_OPEN();
- ALI_SELDEV(index?5:4);
-
- ali_write(0x30, enabled?1:0);
- if (enabled) {
- ali_write(0x60, io >> 8);
- ali_write(0x61, io & 0xff);
- ali_write(0x70, irq);
-
- ali_write(0xf0, 0x00);
- ali_write(0xf1, 0x00);
-
- /* huh? write 0xf2 twice - a typo in rolo
- * or some secret ali errata? Who knows?
- */
- if (index) {
- ali_write(0xf2, 0x00);
- }
- ali_write(0xf2, 0x0c);
- }
- ALI_CLOSE();
-
-}
-
-void ali512x_set_uart2_irda(int enabled)
-{
- ALI_OPEN();
- ALI_SELDEV(5);
-
- ali_write(0xf1, enabled?0x48:0x00); /* fullduplex IrDa */
- ALI_CLOSE();
-
-}
-
-void ali512x_set_rtc(int enabled, u16 io, u8 irq)
-{
- ALI_OPEN();
- ALI_SELDEV(6);
-
- ali_write(0x30, enabled?1:0);
- if (enabled) {
- ali_write(0x60, io >> 8);
- ali_write(0x61, io & 0xff);
- ali_write(0x70, irq);
-
- ali_write(0xf0, 0x00);
- }
- ALI_CLOSE();
-}
-
-void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
-{
- ALI_OPEN();
- ALI_SELDEV(7);
-
- ali_write(0x30, enabled?1:0);
- if (enabled) {
- ali_write(0x70, kbc_irq);
- ali_write(0x72, mouse_irq);
-
- ali_write(0xf0, 0x00);
- }
- ALI_CLOSE();
-}
-
-
-/* Common I/O
- *
- * (This descripotsion is base on several incompete sources
- * since I have not been able to obtain any datasheet for the device
- * there may be some mis-understandings burried in here.
- * -- Daniel daniel@omicron.se)
- *
- * There are 22 CIO pins numbered
- * 10-17
- * 20-25
- * 30-37
- *
- * 20-24 are dedicated CIO pins, the other 17 are muliplexed with
- * other functions.
- *
- * Secondary
- * CIO Pin Function Decription
- * =======================================================
- * CIO10 IRQIN1 Interrupt input 1?
- * CIO11 IRQIN2 Interrupt input 2?
- * CIO12 IRRX IrDa Receive
- * CIO13 IRTX IrDa Transmit
- * CIO14 P21 KBC P21 fucntion
- * CIO15 P20 KBC P21 fucntion
- * CIO16 I2C_CLK I2C Clock
- * CIO17 I2C_DAT I2C Data
- *
- * CIO20 -
- * CIO21 -
- * CIO22 -
- * CIO23 -
- * CIO24 -
- * CIO25 LOCK Keylock
- *
- * CIO30 KBC_CLK Keybaord Clock
- * CIO31 CS0J General Chip Select decoder CS0J
- * CIO32 CS1J General Chip Select decoder CS1J
- * CIO33 ALT_KCLK Alternative Keyboard Clock
- * CIO34 ALT_KDAT Alternative Keyboard Data
- * CIO35 ALT_MCLK Alternative Mouse Clock
- * CIO36 ALT_MDAT Alternative Mouse Data
- * CIO37 ALT_KBC Alternative KBC select
- *
- * The CIO use an indirect address scheme.
- *
- * Reigster 3 in the SIO is used to select the index and data
- * port addresses where the CIO I/O registers show up.
- * The function selection registers are accessible under
- * function SIO 8.
- *
- * SIO reigster 3 (CIO Address Selection) bit definitions:
- * bit 7 CIO index and data registers enabled
- * bit 1-0 CIO indirect registers port address select
- * 0 index = 0xE0 data = 0xE1
- * 1 index = 0xE2 data = 0xE3
- * 2 index = 0xE4 data = 0xE5
- * 3 index = 0xEA data = 0xEB
- *
- * There are three CIO I/O register accessed via CIO index port and CIO data port
- * 0x01 CIO 10-17 data
- * 0x02 CIO 20-25 data (bits 7-6 unused)
- * 0x03 CIO 30-37 data
- *
- *
- * The pin function is accessed through normal
- * SIO registers, each register have the same format:
- *
- * Bit Function Value
- * 0 Input/output 1=input
- * 1 Polarity of signal 1=inverted
- * 2 Unused ??
- * 3 Function (normal or special) 1=special
- * 7-4 Unused
- *
- * SIO REG
- * 0xe0 CIO 10 Config
- * 0xe1 CIO 11 Config
- * 0xe2 CIO 12 Config
- * 0xe3 CIO 13 Config
- * 0xe4 CIO 14 Config
- * 0xe5 CIO 15 Config
- * 0xe6 CIO 16 Config
- * 0xe7 CIO 16 Config
- *
- * 0xe8 CIO 20 Config
- * 0xe9 CIO 21 Config
- * 0xea CIO 22 Config
- * 0xeb CIO 23 Config
- * 0xec CIO 24 Config
- * 0xed CIO 25 Config
- *
- * 0xf5 CIO 30 Config
- * 0xf6 CIO 31 Config
- * 0xf7 CIO 32 Config
- * 0xf8 CIO 33 Config
- * 0xf9 CIO 34 Config
- * 0xfa CIO 35 Config
- * 0xfb CIO 36 Config
- * 0xfc CIO 37 Config
- *
- */
-
-#define ALI_CIO_PORT_SEL 0x83
-#define ALI_CIO_INDEX 0xea
-#define ALI_CIO_DATA 0xeb
-
-void ali512x_set_cio(int enabled)
-{
- int i;
-
- ALI_OPEN();
-
- if (enabled) {
- ali_write(0x3, ALI_CIO_PORT_SEL); /* Enable CIO data register */
- } else {
- ali_write(0x3, ALI_CIO_PORT_SEL & ~0x80);
- }
-
- ALI_SELDEV(8);
-
- ali_write(0x30, enabled?1:0);
-
- /* set all pins to input to start with */
- for (i=0xe0;i<0xee;i++) {
- ali_write(i, 1);
- }
-
- for (i=0xf5;i<0xfe;i++) {
- ali_write(i, 1);
- }
-
- ALI_CLOSE();
-}
-
-
-void ali512x_cio_function(int pin, int special, int inv, int input)
-{
- u8 data;
- u8 addr;
-
- /* valid pins are 10-17, 20-25 and 30-37 */
- if (pin >= 10 && pin <= 17) {
- addr = 0xe0+(pin&7);
- } else if (pin >= 20 && pin <= 25) {
- addr = 0xe8+(pin&7);
- } else if (pin >= 30 && pin <= 37) {
- addr = 0xf5+(pin&7);
- } else {
- return;
- }
-
- ALI_OPEN();
-
- ALI_SELDEV(8);
-
-
- data=0xf4;
- if (special) {
- data |= 0x08;
- } else {
- if (inv) {
- data |= 0x02;
- }
- if (input) {
- data |= 0x01;
- }
- }
-
- ali_write(addr, data);
-
- ALI_CLOSE();
-}
-
-void ali512x_cio_out(int pin, int value)
-{
- u8 reg;
- u8 data;
- u8 bit;
-
- reg = pin/10;
- bit = 1 << (pin%10);
-
-
- outb(reg, ALI_CIO_INDEX); /* select I/O register */
- data = inb(ALI_CIO_DATA);
- if (value) {
- data |= bit;
- } else {
- data &= ~bit;
- }
- outb(data, ALI_CIO_DATA);
-}
-
-int ali512x_cio_in(int pin)
-{
- u8 reg;
- u8 data;
- u8 bit;
-
- /* valid pins are 10-17, 20-25 and 30-37 */
- reg = pin/10;
- bit = 1 << (pin%10);
-
-
- outb(reg, ALI_CIO_INDEX); /* select I/O register */
- data = inb(ALI_CIO_DATA);
-
- return data & bit;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 08/87] sandbox: Drop reference to CONFIG_ARCH_DEVICE_TREE
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (6 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 07/87] misc: Drop ali512x Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 09/87] Rename ARCH_NPCM7xx Simon Glass
` (79 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used anywhere. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/sandbox/config.mk | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk
index 1284ef390b5..2d184c5f652 100644
--- a/arch/sandbox/config.mk
+++ b/arch/sandbox/config.mk
@@ -44,8 +44,6 @@ cmd_u-boot-spl = (cd $(obj) && $(CC) -o $(SPL_BIN) -Wl,-T u-boot-spl.lds \
-Wl,--no-whole-archive \
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot-spl.map -Wl,--gc-sections)
-CONFIG_ARCH_DEVICE_TREE := sandbox
-
ifeq ($(HOST_ARCH),$(HOST_ARCH_X86_64))
EFI_LDS := ${SRCDIR}/../../../arch/x86/lib/elf_x86_64_efi.lds
EFI_TARGET := --target=efi-app-x86_64
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (7 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 08/87] sandbox: Drop reference to CONFIG_ARCH_DEVICE_TREE Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 21:57 ` Rasmus Villemoes
2023-01-29 0:57 ` [PATCH v2 10/87] arm: mvebu: Remove reference to ARMADA_370 Simon Glass
` (78 subsequent siblings)
87 siblings, 1 reply; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/dts/Makefile | 2 +-
arch/arm/mach-npcm/Kconfig | 4 ++--
arch/arm/mach-npcm/Makefile | 2 +-
arch/arm/mach-npcm/npcm7xx/Kconfig | 2 +-
drivers/clk/nuvoton/Makefile | 2 +-
drivers/misc/npcm_otp.c | 2 +-
drivers/pinctrl/nuvoton/Kconfig | 2 +-
7 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3ecd6a86e95..cd5b56034d5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1289,7 +1289,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt8516-pumpkin.dtb \
mt8518-ap1-emmc.dtb
-dtb-$(CONFIG_ARCH_NPCM7xx) += nuvoton-npcm750-evb.dtb
+dtb-$(CONFIG_ARCH_NPCM7XX) += nuvoton-npcm750-evb.dtb
dtb-$(CONFIG_ARCH_NPCM8XX) += nuvoton-npcm845-evb.dtb
dtb-$(CONFIG_XEN) += xenguest-arm64.dtb
diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
index 24bd2ad423f..a709e1f2402 100644
--- a/arch/arm/mach-npcm/Kconfig
+++ b/arch/arm/mach-npcm/Kconfig
@@ -8,9 +8,9 @@ config TEXT_BASE
choice
prompt "Nuvoton SoC select"
- default ARCH_NPCM7xx
+ default ARCH_NPCM7XX
-config ARCH_NPCM7xx
+config ARCH_NPCM7XX
bool "Support Nuvoton NPCM7xx SoC"
select CPU_V7A
select OF_CONTROL
diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
index b448329dea7..4c15fbb8fe5 100644
--- a/arch/arm/mach-npcm/Makefile
+++ b/arch/arm/mach-npcm/Makefile
@@ -1,2 +1,2 @@
-obj-$(CONFIG_ARCH_NPCM7xx) += npcm7xx/
+obj-$(CONFIG_ARCH_NPCM7XX) += npcm7xx/
obj-$(CONFIG_ARCH_NPCM8XX) += npcm8xx/
diff --git a/arch/arm/mach-npcm/npcm7xx/Kconfig b/arch/arm/mach-npcm/npcm7xx/Kconfig
index 237e7ba7e50..17d0a37e97c 100644
--- a/arch/arm/mach-npcm/npcm7xx/Kconfig
+++ b/arch/arm/mach-npcm/npcm7xx/Kconfig
@@ -1,4 +1,4 @@
-if ARCH_NPCM7xx
+if ARCH_NPCM7XX
config SYS_CPU
default "armv7"
diff --git a/drivers/clk/nuvoton/Makefile b/drivers/clk/nuvoton/Makefile
index b55dc80de20..1c210a997d4 100644
--- a/drivers/clk/nuvoton/Makefile
+++ b/drivers/clk/nuvoton/Makefile
@@ -1,3 +1,3 @@
obj-$(CONFIG_ARCH_NPCM) += clk_npcm.o
-obj-$(CONFIG_ARCH_NPCM7xx) += clk_npcm7xx.o
+obj-$(CONFIG_ARCH_NPCM7XX) += clk_npcm7xx.o
obj-$(CONFIG_ARCH_NPCM8XX) += clk_npcm8xx.o
diff --git a/drivers/misc/npcm_otp.c b/drivers/misc/npcm_otp.c
index 304910888bb..15d016f606b 100644
--- a/drivers/misc/npcm_otp.c
+++ b/drivers/misc/npcm_otp.c
@@ -484,7 +484,7 @@ static int npcm_otp_bind(struct udevice *dev)
}
otp_priv->regs[0] = regs;
- if (IS_ENABLED(CONFIG_ARCH_NPCM7xx)) {
+ if (IS_ENABLED(CONFIG_ARCH_NPCM7XX)) {
regs = dev_remap_addr_index(dev, 1);
if (!regs) {
printf("Cannot find reg address (arr #1), binding failed\n");
diff --git a/drivers/pinctrl/nuvoton/Kconfig b/drivers/pinctrl/nuvoton/Kconfig
index e55a0261adb..748d18d40ff 100644
--- a/drivers/pinctrl/nuvoton/Kconfig
+++ b/drivers/pinctrl/nuvoton/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config PINCTRL_NPCM7XX
bool "Pinctrl and GPIO driver for Nuvoton NPCM7XX"
- depends on DM && PINCTRL_GENERIC && ARCH_NPCM7xx
+ depends on DM && PINCTRL_GENERIC && ARCH_NPCM7XX
help
Say Y here to enable pin controller and GPIO support
for Nuvoton NPCM750/730/715/705 SoCs.
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 10/87] arm: mvebu: Remove reference to ARMADA_370
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (8 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 09/87] Rename ARCH_NPCM7xx Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 11/87] arm: mvebu: Drop reference to CONFIG_ARMADA_39X Simon Glass
` (77 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Albert Aribaud
Drop this as it is not referenced anywhere else in the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
Changes in v2:
- Just drop the reference
arch/arm/mach-mvebu/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index a23511b113b..28d3e5e1052 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -35,7 +35,7 @@ endif
extra-y += kwbimage.cfg
-ifneq ($(CONFIG_ARMADA_370)$(CONFIG_ARMADA_XP),)
+ifneq ($(CONFIG_ARMADA_XP),)
KWB_REPLACE += CPU
KWB_CFG_CPU = SHEEVA
else ifneq ($(CONFIG_ARMADA_375)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X),)
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 11/87] arm: mvebu: Drop reference to CONFIG_ARMADA_39X
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (9 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 10/87] arm: mvebu: Remove reference to ARMADA_370 Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 12/87] ppc: Drop bat_rw Simon Glass
` (76 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Stefan Roese, Albert Aribaud
This is not defined anywhere. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
---
(no changes since v1)
arch/arm/mach-mvebu/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 28d3e5e1052..a9f506cf2fb 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -38,7 +38,7 @@ extra-y += kwbimage.cfg
ifneq ($(CONFIG_ARMADA_XP),)
KWB_REPLACE += CPU
KWB_CFG_CPU = SHEEVA
-else ifneq ($(CONFIG_ARMADA_375)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X),)
+else ifneq ($(CONFIG_ARMADA_375)$(CONFIG_ARMADA_38X),)
KWB_REPLACE += CPU
KWB_CFG_CPU = A9
endif
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 12/87] ppc: Drop bat_rw
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (10 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 11/87] arm: mvebu: Drop reference to CONFIG_ARMADA_39X Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 13/87] rockchip: Correct a reference to CONFIG_BOOT_MODE_REG Simon Glass
` (75 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Tom Rini, Simon Glass, Andy Fleming, Mario Six, Priyanka Jain,
Stefan Roese, Wolfgang Denk
Drop this unused driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/powerpc/lib/Makefile | 1 -
arch/powerpc/lib/bat_rw.c | 244 --------------------------------------
2 files changed, 245 deletions(-)
delete mode 100644 arch/powerpc/lib/bat_rw.c
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 066d7f408e0..bb819dcbb6c 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -34,7 +34,6 @@ obj-y += ticks.o
endif
obj-y += reloc.o
-obj-$(CONFIG_BAT_RW) += bat_rw.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-y += cache.o
obj-y += extable.o
diff --git a/arch/powerpc/lib/bat_rw.c b/arch/powerpc/lib/bat_rw.c
deleted file mode 100644
index 24dd30615bd..00000000000
--- a/arch/powerpc/lib/bat_rw.c
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- */
-
-#include <common.h>
-#include <asm/global_data.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <linux/compiler.h>
-
-#ifdef CONFIG_ADDR_MAP
-#include <addr_map.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int write_bat (ppc_bat_t bat, unsigned long upper, unsigned long lower)
-{
- __maybe_unused int batn = -1;
-
- sync();
-
- switch (bat) {
- case DBAT0:
- mtspr (DBAT0L, lower);
- mtspr (DBAT0U, upper);
- batn = 0;
- break;
- case IBAT0:
- mtspr (IBAT0L, lower);
- mtspr (IBAT0U, upper);
- break;
- case DBAT1:
- mtspr (DBAT1L, lower);
- mtspr (DBAT1U, upper);
- batn = 1;
- break;
- case IBAT1:
- mtspr (IBAT1L, lower);
- mtspr (IBAT1U, upper);
- break;
- case DBAT2:
- mtspr (DBAT2L, lower);
- mtspr (DBAT2U, upper);
- batn = 2;
- break;
- case IBAT2:
- mtspr (IBAT2L, lower);
- mtspr (IBAT2U, upper);
- break;
- case DBAT3:
- mtspr (DBAT3L, lower);
- mtspr (DBAT3U, upper);
- batn = 3;
- break;
- case IBAT3:
- mtspr (IBAT3L, lower);
- mtspr (IBAT3U, upper);
- break;
-#ifdef CONFIG_HIGH_BATS
- case DBAT4:
- mtspr (DBAT4L, lower);
- mtspr (DBAT4U, upper);
- batn = 4;
- break;
- case IBAT4:
- mtspr (IBAT4L, lower);
- mtspr (IBAT4U, upper);
- break;
- case DBAT5:
- mtspr (DBAT5L, lower);
- mtspr (DBAT5U, upper);
- batn = 5;
- break;
- case IBAT5:
- mtspr (IBAT5L, lower);
- mtspr (IBAT5U, upper);
- break;
- case DBAT6:
- mtspr (DBAT6L, lower);
- mtspr (DBAT6U, upper);
- batn = 6;
- break;
- case IBAT6:
- mtspr (IBAT6L, lower);
- mtspr (IBAT6U, upper);
- break;
- case DBAT7:
- mtspr (DBAT7L, lower);
- mtspr (DBAT7U, upper);
- batn = 7;
- break;
- case IBAT7:
- mtspr (IBAT7L, lower);
- mtspr (IBAT7U, upper);
- break;
-#endif
- default:
- return (-1);
- }
-
-#ifdef CONFIG_ADDR_MAP
- if ((gd->flags & GD_FLG_RELOC) && (batn >= 0)) {
- phys_size_t size;
- if (!BATU_VALID(upper))
- size = 0;
- else
- size = BATU_SIZE(upper);
- addrmap_set_entry(BATU_VADDR(upper), BATL_PADDR(lower),
- size, batn);
- }
-#endif
-
- sync();
- isync();
-
- return (0);
-}
-
-int read_bat (ppc_bat_t bat, unsigned long *upper, unsigned long *lower)
-{
- unsigned long register u;
- unsigned long register l;
-
- switch (bat) {
- case DBAT0:
- l = mfspr (DBAT0L);
- u = mfspr (DBAT0U);
- break;
- case IBAT0:
- l = mfspr (IBAT0L);
- u = mfspr (IBAT0U);
- break;
- case DBAT1:
- l = mfspr (DBAT1L);
- u = mfspr (DBAT1U);
- break;
- case IBAT1:
- l = mfspr (IBAT1L);
- u = mfspr (IBAT1U);
- break;
- case DBAT2:
- l = mfspr (DBAT2L);
- u = mfspr (DBAT2U);
- break;
- case IBAT2:
- l = mfspr (IBAT2L);
- u = mfspr (IBAT2U);
- break;
- case DBAT3:
- l = mfspr (DBAT3L);
- u = mfspr (DBAT3U);
- break;
- case IBAT3:
- l = mfspr (IBAT3L);
- u = mfspr (IBAT3U);
- break;
-#ifdef CONFIG_HIGH_BATS
- case DBAT4:
- l = mfspr (DBAT4L);
- u = mfspr (DBAT4U);
- break;
- case IBAT4:
- l = mfspr (IBAT4L);
- u = mfspr (IBAT4U);
- break;
- case DBAT5:
- l = mfspr (DBAT5L);
- u = mfspr (DBAT5U);
- break;
- case IBAT5:
- l = mfspr (IBAT5L);
- u = mfspr (IBAT5U);
- break;
- case DBAT6:
- l = mfspr (DBAT6L);
- u = mfspr (DBAT6U);
- break;
- case IBAT6:
- l = mfspr (IBAT6L);
- u = mfspr (IBAT6U);
- break;
- case DBAT7:
- l = mfspr (DBAT7L);
- u = mfspr (DBAT7U);
- break;
- case IBAT7:
- l = mfspr (IBAT7L);
- u = mfspr (IBAT7U);
- break;
-#endif
- default:
- return (-1);
- }
-
- *upper = u;
- *lower = l;
-
- return (0);
-}
-
-void print_bats(void)
-{
- printf("BAT registers:\n");
-
- printf ("\tIBAT0L = 0x%08X ", mfspr (IBAT0L));
- printf ("\tIBAT0U = 0x%08X\n", mfspr (IBAT0U));
- printf ("\tDBAT0L = 0x%08X ", mfspr (DBAT0L));
- printf ("\tDBAT0U = 0x%08X\n", mfspr (DBAT0U));
- printf ("\tIBAT1L = 0x%08X ", mfspr (IBAT1L));
- printf ("\tIBAT1U = 0x%08X\n", mfspr (IBAT1U));
- printf ("\tDBAT1L = 0x%08X ", mfspr (DBAT1L));
- printf ("\tDBAT1U = 0x%08X\n", mfspr (DBAT1U));
- printf ("\tIBAT2L = 0x%08X ", mfspr (IBAT2L));
- printf ("\tIBAT2U = 0x%08X\n", mfspr (IBAT2U));
- printf ("\tDBAT2L = 0x%08X ", mfspr (DBAT2L));
- printf ("\tDBAT2U = 0x%08X\n", mfspr (DBAT2U));
- printf ("\tIBAT3L = 0x%08X ", mfspr (IBAT3L));
- printf ("\tIBAT3U = 0x%08X\n", mfspr (IBAT3U));
- printf ("\tDBAT3L = 0x%08X ", mfspr (DBAT3L));
- printf ("\tDBAT3U = 0x%08X\n", mfspr (DBAT3U));
-
-#ifdef CONFIG_HIGH_BATS
- printf ("\tIBAT4L = 0x%08X ", mfspr (IBAT4L));
- printf ("\tIBAT4U = 0x%08X\n", mfspr (IBAT4U));
- printf ("\tDBAT4L = 0x%08X ", mfspr (DBAT4L));
- printf ("\tDBAT4U = 0x%08X\n", mfspr (DBAT4U));
- printf ("\tIBAT5L = 0x%08X ", mfspr (IBAT5L));
- printf ("\tIBAT5U = 0x%08X\n", mfspr (IBAT5U));
- printf ("\tDBAT5L = 0x%08X ", mfspr (DBAT5L));
- printf ("\tDBAT5U = 0x%08X\n", mfspr (DBAT5U));
- printf ("\tIBAT6L = 0x%08X ", mfspr (IBAT6L));
- printf ("\tIBAT6U = 0x%08X\n", mfspr (IBAT6U));
- printf ("\tDBAT6L = 0x%08X ", mfspr (DBAT6L));
- printf ("\tDBAT6U = 0x%08X\n", mfspr (DBAT6U));
- printf ("\tIBAT7L = 0x%08X ", mfspr (IBAT7L));
- printf ("\tIBAT7U = 0x%08X\n", mfspr (IBAT7U));
- printf ("\tDBAT7L = 0x%08X ", mfspr (DBAT7L));
- printf ("\tDBAT7U = 0x%08X\n", mfspr (DBAT7U));
-#endif
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 13/87] rockchip: Correct a reference to CONFIG_BOOT_MODE_REG
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (11 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 12/87] ppc: Drop bat_rw Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 14/87] cmd: Add an option to enable the ini command Simon Glass
` (74 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Tom Rini, Simon Glass, Jeffy Chen, Kever Yang, Philipp Tomsich,
huang lin
This option does not exist and should refer to
CONFIG_ROCKCHIP_BOOT_MODE_REG instead. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/mach-rockchip/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 32138fa723f..e3d4a8b42e4 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -18,7 +18,7 @@ obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
# Always include boot_mode.o, as we bypass it (i.e. turn it off)
-# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0. This way,
+# inside of boot_mode.c when CONFIG_ROCKCHIP_BOOT_MODE_REG is 0. This way,
# we can have the preprocessor correctly recognise both 0x0 and 0
# meaning "turn it off".
obj-y += boot_mode.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 14/87] cmd: Add an option to enable the ini command
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (12 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 13/87] rockchip: Correct a reference to CONFIG_BOOT_MODE_REG Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 15/87] cmd: Drop mfsl command Simon Glass
` (73 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This command has no Kconfig option at present, but seems useful enough to
keep around. Add one.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
cmd/Kconfig | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 4fe2c75de25..b697469a4cb 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -2015,6 +2015,13 @@ config CMD_LED
with led on/off/togle/blink. Any LED drivers can be controlled with
this command, e.g. led_gpio.
+config CMD_INI
+ bool "ini"
+ help
+ Enable the 'ini' command which allows a .ini file to be parsed and
+ placed into environment variables. Please check the source code for
+ this as there is no documentation.
+
config CMD_DATE
bool "date"
default y if DM_RTC
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 15/87] cmd: Drop mfsl command
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (13 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 14/87] cmd: Add an option to enable the ini command Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 16/87] Correct CONFIG_CONTROLCENTERDC Simon Glass
` (72 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used anywhere. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
cmd/Makefile | 1 -
cmd/mfsl.c | 387 ---------------------------------------------------
2 files changed, 388 deletions(-)
delete mode 100644 cmd/mfsl.c
diff --git a/cmd/Makefile b/cmd/Makefile
index 0b6a96c1d91..4adc7530a0a 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -108,7 +108,6 @@ obj-$(CONFIG_ID_EEPROM) += mac.o
obj-$(CONFIG_CMD_MD5SUM) += md5sum.o
obj-$(CONFIG_CMD_MEMORY) += mem.o
obj-$(CONFIG_CMD_IO) += io.o
-obj-$(CONFIG_CMD_MFSL) += mfsl.o
obj-$(CONFIG_CMD_MII) += mii.o
obj-$(CONFIG_CMD_MISC) += misc.o
obj-$(CONFIG_CMD_MDIO) += mdio.o
diff --git a/cmd/mfsl.c b/cmd/mfsl.c
deleted file mode 100644
index 0c78720ec46..00000000000
--- a/cmd/mfsl.c
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- */
-
-/*
- * Microblaze FSL support
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <asm/asm.h>
-
-int do_frd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- unsigned int fslnum;
- unsigned int num;
- unsigned int blocking;
-
- if (argc < 2)
- return CMD_RET_USAGE;
-
- fslnum = (unsigned int)hextoul(argv[1], NULL);
- blocking = (unsigned int)hextoul(argv[2], NULL);
- if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) {
- puts ("Bad number of FSL\n");
- return CMD_RET_USAGE;
- }
-
- switch (fslnum) {
-#if (XILINX_FSL_NUMBER > 0)
- case 0:
- switch (blocking) {
- case 0: NGET (num, 0);
- break;
- case 1: NCGET (num, 0);
- break;
- case 2: GET (num, 0);
- break;
- case 3: CGET (num, 0);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 1)
- case 1:
- switch (blocking) {
- case 0: NGET (num, 1);
- break;
- case 1: NCGET (num, 1);
- break;
- case 2: GET (num, 1);
- break;
- case 3: CGET (num, 1);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 2)
- case 2:
- switch (blocking) {
- case 0: NGET (num, 2);
- break;
- case 1: NCGET (num, 2);
- break;
- case 2: GET (num, 2);
- break;
- case 3: CGET (num, 2);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 3)
- case 3:
- switch (blocking) {
- case 0: NGET (num, 3);
- break;
- case 1: NCGET (num, 3);
- break;
- case 2: GET (num, 3);
- break;
- case 3: CGET (num, 3);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 4)
- case 4:
- switch (blocking) {
- case 0: NGET (num, 4);
- break;
- case 1: NCGET (num, 4);
- break;
- case 2: GET (num, 4);
- break;
- case 3: CGET (num, 4);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 5)
- case 5:
- switch (blocking) {
- case 0: NGET (num, 5);
- break;
- case 1: NCGET (num, 5);
- break;
- case 2: GET (num, 5);
- break;
- case 3: CGET (num, 5);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 6)
- case 6:
- switch (blocking) {
- case 0: NGET (num, 6);
- break;
- case 1: NCGET (num, 6);
- break;
- case 2: GET (num, 6);
- break;
- case 3: CGET (num, 6);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 7)
- case 7:
- switch (blocking) {
- case 0: NGET (num, 7);
- break;
- case 1: NCGET (num, 7);
- break;
- case 2: GET (num, 7);
- break;
- case 3: CGET (num, 7);
- break;
- default:
- return 2;
- }
- break;
-#endif
- default:
- return 1;
- }
-
- printf ("%01x: 0x%08x - %s %s read\n", fslnum, num,
- blocking < 2 ? "non blocking" : "blocking",
- ((blocking == 1) || (blocking == 3)) ? "control" : "data" );
- return 0;
-}
-
-int do_fwr(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- unsigned int fslnum;
- unsigned int num;
- unsigned int blocking;
-
- if (argc < 3)
- return CMD_RET_USAGE;
-
- fslnum = (unsigned int)hextoul(argv[1], NULL);
- num = (unsigned int)hextoul(argv[2], NULL);
- blocking = (unsigned int)hextoul(argv[3], NULL);
- if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER)
- return CMD_RET_USAGE;
-
- switch (fslnum) {
-#if (XILINX_FSL_NUMBER > 0)
- case 0:
- switch (blocking) {
- case 0: NPUT (num, 0);
- break;
- case 1: NCPUT (num, 0);
- break;
- case 2: PUT (num, 0);
- break;
- case 3: CPUT (num, 0);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 1)
- case 1:
- switch (blocking) {
- case 0: NPUT (num, 1);
- break;
- case 1: NCPUT (num, 1);
- break;
- case 2: PUT (num, 1);
- break;
- case 3: CPUT (num, 1);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 2)
- case 2:
- switch (blocking) {
- case 0: NPUT (num, 2);
- break;
- case 1: NCPUT (num, 2);
- break;
- case 2: PUT (num, 2);
- break;
- case 3: CPUT (num, 2);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 3)
- case 3:
- switch (blocking) {
- case 0: NPUT (num, 3);
- break;
- case 1: NCPUT (num, 3);
- break;
- case 2: PUT (num, 3);
- break;
- case 3: CPUT (num, 3);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 4)
- case 4:
- switch (blocking) {
- case 0: NPUT (num, 4);
- break;
- case 1: NCPUT (num, 4);
- break;
- case 2: PUT (num, 4);
- break;
- case 3: CPUT (num, 4);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 5)
- case 5:
- switch (blocking) {
- case 0: NPUT (num, 5);
- break;
- case 1: NCPUT (num, 5);
- break;
- case 2: PUT (num, 5);
- break;
- case 3: CPUT (num, 5);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 6)
- case 6:
- switch (blocking) {
- case 0: NPUT (num, 6);
- break;
- case 1: NCPUT (num, 6);
- break;
- case 2: PUT (num, 6);
- break;
- case 3: CPUT (num, 6);
- break;
- default:
- return 2;
- }
- break;
-#endif
-#if (XILINX_FSL_NUMBER > 7)
- case 7:
- switch (blocking) {
- case 0: NPUT (num, 7);
- break;
- case 1: NCPUT (num, 7);
- break;
- case 2: PUT (num, 7);
- break;
- case 3: CPUT (num, 7);
- break;
- default:
- return 2;
- }
- break;
-#endif
- default:
- return 1;
- }
-
- printf ("%01x: 0x%08x - %s %s write\n", fslnum, num,
- blocking < 2 ? "non blocking" : "blocking",
- ((blocking == 1) || (blocking == 3)) ? "control" : "data" );
- return 0;
-
-}
-
-int do_rspr(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- unsigned int reg = 0;
- unsigned int val = 0;
-
- if (argc < 2)
- return CMD_RET_USAGE;
-
- reg = (unsigned int)hextoul(argv[1], NULL);
- val = (unsigned int)hextoul(argv[2], NULL);
- switch (reg) {
- case 0x1:
- if (argc > 2) {
- MTS (val, rmsr);
- NOP;
- MFS (val, rmsr);
- } else {
- MFS (val, rmsr);
- }
- puts ("MSR");
- break;
- case 0x3:
- MFS (val, rear);
- puts ("EAR");
- break;
- case 0x5:
- MFS (val, resr);
- puts ("ESR");
- break;
- default:
- puts ("Unsupported register\n");
- return 1;
- }
- printf (": 0x%08x\n", val);
- return 0;
-}
-
-/***************************************************/
-
-U_BOOT_CMD (frd, 3, 1, do_frd,
- "read data from FSL",
- "- [fslnum [0|1|2|3]]\n"
- " 0 - non blocking data read\n"
- " 1 - non blocking control read\n"
- " 2 - blocking data read\n"
- " 3 - blocking control read");
-
-U_BOOT_CMD (fwr, 4, 1, do_fwr,
- "write data to FSL",
- "- [fslnum [0|1|2|3]]\n"
- " 0 - non blocking data write\n"
- " 1 - non blocking control write\n"
- " 2 - blocking data write\n"
- " 3 - blocking control write");
-
-U_BOOT_CMD (rspr, 3, 1, do_rspr,
- "read/write special purpose register",
- "- reg_num [write value] read/write special purpose register\n"
- " 1 - MSR - Machine status register\n"
- " 3 - EAR - Exception address register\n"
- " 5 - ESR - Exception status register");
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 16/87] Correct CONFIG_CONTROLCENTERDC
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (14 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 15/87] cmd: Drop mfsl command Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 17/87] Drop dataflash_mmc_mux command Simon Glass
` (71 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This option does not exist but presumably means to point to
CONFIG_TARGET_CONTROLCENTERDC. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/gdsys/common/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile
index dd6d5e69de5..553e2ca50ed 100644
--- a/board/gdsys/common/Makefile
+++ b/board/gdsys/common/Makefile
@@ -5,7 +5,7 @@
obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o
obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o
-obj-$(CONFIG_CONTROLCENTERD) += dp501.o
+obj-$(CONFIG_TARGET_CONTROLCENTERDC) += dp501.o
obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o
ifdef CONFIG_OSD
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 17/87] Drop dataflash_mmc_mux command
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (15 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 16/87] Correct CONFIG_CONTROLCENTERDC Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 18/87] Drop CONFIG_DM644X_GPIO Simon Glass
` (70 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
cmd/Makefile | 1 -
cmd/dataflash_mmc_mux.c | 48 -----------------------------------------
2 files changed, 49 deletions(-)
delete mode 100644 cmd/dataflash_mmc_mux.c
diff --git a/cmd/Makefile b/cmd/Makefile
index 4adc7530a0a..b6888a52f49 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -47,7 +47,6 @@ obj-$(CONFIG_CMD_CONFIG) += config.o
obj-$(CONFIG_CMD_CONITRACE) += conitrace.o
obj-$(CONFIG_CMD_CONSOLE) += console.o
obj-$(CONFIG_CMD_CPU) += cpu.o
-obj-$(CONFIG_DATAFLASH_MMC_SELECT) += dataflash_mmc_mux.o
obj-$(CONFIG_CMD_DATE) += date.o
obj-$(CONFIG_CMD_DEMO) += demo.o
obj-$(CONFIG_CMD_DM) += dm.o
diff --git a/cmd/dataflash_mmc_mux.c b/cmd/dataflash_mmc_mux.c
deleted file mode 100644
index 73876e9464a..00000000000
--- a/cmd/dataflash_mmc_mux.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <command.h>
-
-static int mmc_nspi (const char *);
-
-int do_dataflash_mmc_mux(struct cmd_tbl *cmdtp, int flag, int argc,
- char *const argv[])
-{
- switch (argc) {
- case 2: /* on / off */
- switch (mmc_nspi (argv[1])) {
- case 0: AT91F_SelectSPI ();
- break;
- case 1: AT91F_SelectMMC ();
- break;
- }
- case 1: /* get status */
- printf ("Mux is configured to be %s\n",
- AT91F_GetMuxStatus () ? "MMC" : "SPI");
- return 0;
- default:
- return CMD_RET_USAGE;
- }
- return 0;
-}
-
-static int mmc_nspi (const char *s)
-{
- if (strcmp (s, "mmc") == 0) {
- return 1;
- } else if (strcmp (s, "spi") == 0) {
- return 0;
- }
- return -1;
-}
-
-U_BOOT_CMD(
- dataflash_mmc_mux, 2, 1, do_dataflash_mmc_mux,
- "enable or disable MMC or SPI\n",
- "[mmc, spi]\n"
- " - enable or disable MMC or SPI"
-);
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 18/87] Drop CONFIG_DM644X_GPIO
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (16 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 17/87] Drop dataflash_mmc_mux command Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 19/87] Makefile: Avoid use of invalid CONFIG_ option Simon Glass
` (69 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
Drop this unused option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/gpio/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 57603645c1c..07fca7bd33d 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_SANDBOX_GPIO) += sandbox.o sandbox_test.o
obj-$(CONFIG_TEGRA_GPIO) += tegra_gpio.o
obj-$(CONFIG_TEGRA186_GPIO) += tegra186_gpio.o
obj-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o
-obj-$(CONFIG_DM644X_GPIO) += da8xx_gpio.o
obj-$(CONFIG_ALTERA_PIO) += altera_pio.o
obj-$(CONFIG_MPC83XX_GPIO) += mpc83xx_gpio.o
obj-$(CONFIG_MPC8XXX_GPIO) += mpc8xxx_gpio.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 19/87] Makefile: Avoid use of invalid CONFIG_ option
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (17 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 18/87] Drop CONFIG_DM644X_GPIO Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 20/87] env: Drop ENV_IS_IN_SATA Simon Glass
` (68 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Masahiro Yamada
This appears in a comment but is not a real option. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index debe691c39e..400261606e3 100644
--- a/Makefile
+++ b/Makefile
@@ -1082,7 +1082,7 @@ expect = $(foreach cfg,$(1),y)
# Show a deprecation message
# Args:
-# 1: List of CONFIG_DM_... to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
+# 1: List of options to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
# 2: Name of component (e.g . "Ethernet drivers")
# 3: Release deadline (e.g. "v202.07")
# 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 20/87] env: Drop ENV_IS_IN_SATA
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (18 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 19/87] Makefile: Avoid use of invalid CONFIG_ option Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 21/87] samsung: Drop CONFIG_EXYNOS_PWM_BL Simon Glass
` (67 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Joe Hershberger
This is not used anywhere, so drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
cmd/nvedit.c | 1 -
env/Makefile | 1 -
env/env.c | 3 --
env/sata.c | 122 ---------------------------------------------------
4 files changed, 127 deletions(-)
delete mode 100644 env/sata.c
diff --git a/cmd/nvedit.c b/cmd/nvedit.c
index 53e6b57b60e..e2a5f0089e9 100644
--- a/cmd/nvedit.c
+++ b/cmd/nvedit.c
@@ -51,7 +51,6 @@ DECLARE_GLOBAL_DATA_PTR;
defined(CONFIG_ENV_IS_IN_NAND) || \
defined(CONFIG_ENV_IS_IN_NVRAM) || \
defined(CONFIG_ENV_IS_IN_ONENAND) || \
- defined(CONFIG_ENV_IS_IN_SATA) || \
defined(CONFIG_ENV_IS_IN_SPI_FLASH) || \
defined(CONFIG_ENV_IS_IN_REMOTE) || \
defined(CONFIG_ENV_IS_IN_UBI)
diff --git a/env/Makefile b/env/Makefile
index bb6e24b396d..673b979fdfa 100644
--- a/env/Makefile
+++ b/env/Makefile
@@ -16,7 +16,6 @@ extra-$(CONFIG_ENV_IS_IN_FLASH) += embedded.o
obj-$(CONFIG_ENV_IS_IN_NVRAM) += embedded.o
obj-$(CONFIG_ENV_IS_IN_NVRAM) += nvram.o
obj-$(CONFIG_ENV_IS_IN_ONENAND) += onenand.o
-obj-$(CONFIG_ENV_IS_IN_SATA) += sata.o
obj-$(CONFIG_ENV_IS_IN_REMOTE) += remote.o
obj-$(CONFIG_ENV_IS_IN_UBI) += ubi.o
endif
diff --git a/env/env.c b/env/env.c
index 06078c7f374..0f73ebc08e0 100644
--- a/env/env.c
+++ b/env/env.c
@@ -78,9 +78,6 @@ static enum env_location env_locations[] = {
#ifdef CONFIG_ENV_IS_IN_REMOTE
ENVL_REMOTE,
#endif
-#ifdef CONFIG_ENV_IS_IN_SATA
- ENVL_ESATA,
-#endif
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
ENVL_SPI_FLASH,
#endif
diff --git a/env/sata.c b/env/sata.c
deleted file mode 100644
index 9442cfcaf3c..00000000000
--- a/env/sata.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010-2016 Freescale Semiconductor, Inc.
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-
-#include <command.h>
-#include <env.h>
-#include <env_internal.h>
-#include <linux/stddef.h>
-#include <errno.h>
-#include <memalign.h>
-#include <sata.h>
-#include <search.h>
-
-#if defined(CONFIG_ENV_OFFSET_REDUND)
-#error ENV REDUND not supported
-#endif
-
-#if !defined(CONFIG_ENV_OFFSET) || !defined(CONFIG_ENV_SIZE)
-#error CONFIG_ENV_OFFSET or CONFIG_ENV_SIZE not defined
-#endif
-
-__weak int sata_get_env_dev(void)
-{
- return CONFIG_SYS_SATA_ENV_DEV;
-}
-
-#ifdef CONFIG_CMD_SAVEENV
-static inline int write_env(struct blk_desc *sata, unsigned long size,
- unsigned long offset, void *buffer)
-{
- uint blk_start, blk_cnt, n;
-
- blk_start = ALIGN(offset, sata->blksz) / sata->blksz;
- blk_cnt = ALIGN(size, sata->blksz) / sata->blksz;
-
- n = blk_dwrite(sata, blk_start, blk_cnt, buffer);
-
- return (n == blk_cnt) ? 0 : -1;
-}
-
-static int env_sata_save(void)
-{
- ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1);
- struct blk_desc *sata = NULL;
- int env_sata, ret;
-
- if (sata_initialize())
- return 1;
-
- env_sata = sata_get_env_dev();
-
- sata = sata_get_dev(env_sata);
- if (sata == NULL) {
- printf("Unknown SATA(%d) device for environment!\n",
- env_sata);
- return 1;
- }
-
- ret = env_export(env_new);
- if (ret)
- return 1;
-
- printf("Writing to SATA(%d)...", env_sata);
- if (write_env(sata, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, (u_char *)env_new)) {
- puts("failed\n");
- return 1;
- }
-
- puts("done\n");
- return 0;
-}
-#endif /* CONFIG_CMD_SAVEENV */
-
-static inline int read_env(struct blk_desc *sata, unsigned long size,
- unsigned long offset, void *buffer)
-{
- uint blk_start, blk_cnt, n;
-
- blk_start = ALIGN(offset, sata->blksz) / sata->blksz;
- blk_cnt = ALIGN(size, sata->blksz) / sata->blksz;
-
- n = blk_dread(sata, blk_start, blk_cnt, buffer);
-
- return (n == blk_cnt) ? 0 : -1;
-}
-
-static void env_sata_load(void)
-{
- ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE);
- struct blk_desc *sata = NULL;
- int env_sata;
-
- if (sata_initialize())
- return -EIO;
-
- env_sata = sata_get_env_dev();
-
- sata = sata_get_dev(env_sata);
- if (sata == NULL) {
- printf("Unknown SATA(%d) device for environment!\n", env_sata);
- return -EIO;
- }
-
- if (read_env(sata, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, buf)) {
- env_set_default(NULL, 0);
- return -EIO;
- }
-
- return env_import(buf, 1, H_EXTERNAL);
-}
-
-U_BOOT_ENV_LOCATION(sata) = {
- .location = ENVL_ESATA,
- ENV_NAME("SATA")
- .load = env_sata_load,
- .save = env_save_ptr(env_sata_save),
-};
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 21/87] samsung: Drop CONFIG_EXYNOS_PWM_BL
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (19 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 20/87] env: Drop ENV_IS_IN_SATA Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 22/87] fpga: Add a LATTICE option Simon Glass
` (66 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Minkyu Kang
This is not defined anywhere. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/video/exynos/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/video/exynos/Makefile b/drivers/video/exynos/Makefile
index 0f58954e49c..45067f562cb 100644
--- a/drivers/video/exynos/Makefile
+++ b/drivers/video/exynos/Makefile
@@ -7,4 +7,3 @@ obj-$(CONFIG_EXYNOS_DP) += exynos_dp.o exynos_dp_lowlevel.o
obj-$(CONFIG_EXYNOS_FB) += exynos_fb.o
obj-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \
exynos_mipi_dsi_lowlevel.o
-obj-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 22/87] fpga: Add a LATTICE option
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (20 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 21/87] samsung: Drop CONFIG_EXYNOS_PWM_BL Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 23/87] fpga: Add a FPGA_STRATIX_II option Simon Glass
` (65 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
There is no Kconfig option for this code, but it seems to be useful. Add
one.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/fpga/Kconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 4113de230cd..2034d0ebd9c 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -54,6 +54,12 @@ config FPGA_INTEL_SDM_MAILBOX
Enable FPGA driver for writing full bitstream into Intel FPGA
devices through SDM (Secure Device Manager) Mailbox.
+config FPGA_LATTICE
+ bool "Enable Lattice FPGA driver"
+ help
+ This is used for the lattice FPGAs. Please check the source code as
+ there is no documentation for this at present.
+
config FPGA_XILINX
bool "Enable Xilinx FPGA drivers"
select FPGA
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 23/87] fpga: Add a FPGA_STRATIX_II option
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (21 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 22/87] fpga: Add a LATTICE option Simon Glass
@ 2023-01-29 0:57 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 24/87] misc: Drop mc9sdz60 driver Simon Glass
` (64 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:57 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
There is no Kconfig option for this code, but it seems to be useful. Add
one.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/fpga/Kconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 2034d0ebd9c..61490d6d8de 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -21,6 +21,12 @@ config FPGA_SOCFPGA
This provides common functionality for Gen5 and Arria10 devices.
+config FPGA_STRATIX_II
+ bool "Enable Stratix II FPGA drivers"
+ depends on FPGA_ALTERA
+ help
+ Say Y here to enable the Altera Stratix II FPGA-specific driver.
+
config FPGA_STRATIX_V
bool "Enable Stratix V FPGA drivers"
depends on FPGA_ALTERA
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 24/87] misc: Drop mc9sdz60 driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (22 preceding siblings ...)
2023-01-29 0:57 ` [PATCH v2 23/87] fpga: Add a FPGA_STRATIX_II option Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 25/87] freescale: Drop unused pixis code Simon Glass
` (63 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
Drop this unused driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/misc/Makefile | 1 -
drivers/misc/mc9sdz60.c | 34 ----------------------------------
2 files changed, 35 deletions(-)
delete mode 100644 drivers/misc/mc9sdz60.c
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 2de510329d8..3b792f2a14c 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_DS4510) += ds4510.o
obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_FSL_IIM) += fsl_iim.o
-obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
obj-$(CONFIG_$(SPL_)FS_LOADER) += fs_loader.o
obj-$(CONFIG_GATEWORKS_SC) += gsc.o
diff --git a/drivers/misc/mc9sdz60.c b/drivers/misc/mc9sdz60.c
deleted file mode 100644
index e68a056a559..00000000000
--- a/drivers/misc/mc9sdz60.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010 Stefano Babic <sbabic@denx.de>
- */
-
-
-#include <config.h>
-#include <common.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <i2c.h>
-#include <mc9sdz60.h>
-
-#ifndef CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR
-#error "You have to configure I2C address for MC9SDZ60"
-#endif
-
-
-u8 mc9sdz60_reg_read(enum mc9sdz60_reg reg)
-{
- u8 val;
-
- if (i2c_read(CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR, reg, 1, &val, 1)) {
- puts("Error reading MC9SDZ60 register\n");
- return -1;
- }
-
- return val;
-}
-
-void mc9sdz60_reg_write(enum mc9sdz60_reg reg, u8 val)
-{
- i2c_write(CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR, reg, 1, &val, 1);
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 25/87] freescale: Drop unused pixis code
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (23 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 24/87] misc: Drop mc9sdz60 driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 26/87] freescale: Drop unused ftpmu010 driver Simon Glass
` (62 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
Drop this unused code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/freescale/common/Makefile | 1 -
board/freescale/common/pixis.c | 470 --------------------------------
board/freescale/common/pixis.h | 54 ----
3 files changed, 525 deletions(-)
delete mode 100644 board/freescale/common/pixis.c
delete mode 100644 board/freescale/common/pixis.h
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index cc1371867d8..fc51d6d3e18 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -29,7 +29,6 @@ endif
obj-$(CONFIG_FSL_CADMUS) += cadmus.o
obj-$(CONFIG_FSL_VIA) += cds_via.o
obj-$(CONFIG_FMAN_ENET) += fman.o
-obj-$(CONFIG_FSL_PIXIS) += pixis.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
endif
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
deleted file mode 100644
index 7096b107e54..00000000000
--- a/board/freescale/common/pixis.c
+++ /dev/null
@@ -1,470 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2006,2010 Freescale Semiconductor
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#define pixis_base (u8 *)PIXIS_BASE
-
-/*
- * Simple board reset.
- */
-void pixis_reset(void)
-{
- out_8(pixis_base + PIXIS_RST, 0);
-
- while (1);
-}
-
-/*
- * Per table 27, page 58 of MPC8641HPCN spec.
- */
-static int set_px_sysclk(unsigned long sysclk)
-{
- u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;
-
- switch (sysclk) {
- case 33:
- sysclk_s = 0x04;
- sysclk_r = 0x04;
- sysclk_v = 0x07;
- sysclk_aux = 0x00;
- break;
- case 40:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x20;
- sysclk_aux = 0x01;
- break;
- case 50:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x2A;
- sysclk_aux = 0x02;
- break;
- case 66:
- sysclk_s = 0x01;
- sysclk_r = 0x04;
- sysclk_v = 0x04;
- sysclk_aux = 0x03;
- break;
- case 83:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x4B;
- sysclk_aux = 0x04;
- break;
- case 100:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x5C;
- sysclk_aux = 0x05;
- break;
- case 134:
- sysclk_s = 0x06;
- sysclk_r = 0x1F;
- sysclk_v = 0x3B;
- sysclk_aux = 0x06;
- break;
- case 166:
- sysclk_s = 0x06;
- sysclk_r = 0x1F;
- sysclk_v = 0x4B;
- sysclk_aux = 0x07;
- break;
- default:
- printf("Unsupported SYSCLK frequency.\n");
- return 0;
- }
-
- vclkh = (sysclk_s << 5) | sysclk_r;
- vclkl = sysclk_v;
-
- out_8(pixis_base + PIXIS_VCLKH, vclkh);
- out_8(pixis_base + PIXIS_VCLKL, vclkl);
-
- out_8(pixis_base + PIXIS_AUX, sysclk_aux);
-
- return 1;
-}
-
-/* Set the CFG_SYSPLL bits
- *
- * This only has effect if PX_VCFGEN0[SYSPLL]=1, which is true if
- * read_from_px_regs() is called.
- */
-static int set_px_mpxpll(unsigned long mpxpll)
-{
- switch (mpxpll) {
- case 2:
- case 4:
- case 6:
- case 8:
- case 10:
- case 12:
- case 14:
- case 16:
- clrsetbits_8(pixis_base + PIXIS_VSPEED1, 0x1F, mpxpll);
- return 1;
- }
-
- printf("Unsupported MPXPLL ratio.\n");
- return 0;
-}
-
-static int set_px_corepll(unsigned long corepll)
-{
- u8 val;
-
- switch (corepll) {
- case 20:
- val = 0x08;
- break;
- case 25:
- val = 0x0C;
- break;
- case 30:
- val = 0x10;
- break;
- case 35:
- val = 0x1C;
- break;
- case 40:
- val = 0x14;
- break;
- case 45:
- val = 0x0E;
- break;
- default:
- printf("Unsupported COREPLL ratio.\n");
- return 0;
- }
-
- clrsetbits_8(pixis_base + PIXIS_VSPEED0, 0x1F, val);
- return 1;
-}
-
-#ifndef CFG_SYS_PIXIS_VCFGEN0_ENABLE
-#define CFG_SYS_PIXIS_VCFGEN0_ENABLE 0x1C
-#endif
-
-/* Tell the PIXIS where to find the COREPLL, MPXPLL, SYSCLK values
- *
- * The PIXIS can be programmed to look at either the on-board dip switches
- * or various other PIXIS registers to determine the values for COREPLL,
- * MPXPLL, and SYSCLK.
- *
- * CFG_SYS_PIXIS_VCFGEN0_ENABLE is the value to write to the PIXIS_VCFGEN0
- * register that tells the pixis to use the various PIXIS register.
- */
-static void read_from_px_regs(int set)
-{
- u8 tmp = in_8(pixis_base + PIXIS_VCFGEN0);
-
- if (set)
- tmp = tmp | CFG_SYS_PIXIS_VCFGEN0_ENABLE;
- else
- tmp = tmp & ~CFG_SYS_PIXIS_VCFGEN0_ENABLE;
-
- out_8(pixis_base + PIXIS_VCFGEN0, tmp);
-}
-
-/* CFG_SYS_PIXIS_VBOOT_ENABLE is the value to write to the PX_VCFGEN1
- * register that tells the pixis to use the PX_VBOOT[LBMAP] register.
- */
-#ifndef CFG_SYS_PIXIS_VBOOT_ENABLE
-#define CFG_SYS_PIXIS_VBOOT_ENABLE 0x04
-#endif
-
-/* Configure the source of the boot location
- *
- * The PIXIS can be programmed to look at either the on-board dip switches
- * or the PX_VBOOT[LBMAP] register to determine where we should boot.
- *
- * If we want to boot from the alternate boot bank, we need to tell the PIXIS
- * to ignore the on-board dip switches and use the PX_VBOOT[LBMAP] instead.
- */
-static void read_from_px_regs_altbank(int set)
-{
- u8 tmp = in_8(pixis_base + PIXIS_VCFGEN1);
-
- if (set)
- tmp = tmp | CFG_SYS_PIXIS_VBOOT_ENABLE;
- else
- tmp = tmp & ~CFG_SYS_PIXIS_VBOOT_ENABLE;
-
- out_8(pixis_base + PIXIS_VCFGEN1, tmp);
-}
-
-/* CFG_SYS_PIXIS_VBOOT_MASK contains the bits to set in VBOOT register that
- * tells the PIXIS what the alternate flash bank is.
- *
- * Note that it's not really a mask. It contains the actual LBMAP bits that
- * must be set to select the alternate bank. This code assumes that the
- * primary bank has these bits set to 0, and the alternate bank has these
- * bits set to 1.
- */
-#ifndef CFG_SYS_PIXIS_VBOOT_MASK
-#define CFG_SYS_PIXIS_VBOOT_MASK (0x40)
-#endif
-
-/* Tell the PIXIS to boot from the default flash bank
- *
- * Program the default flash bank into the VBOOT register. This register is
- * used only if PX_VCFGEN1[FLASH]=1.
- */
-static void clear_altbank(void)
-{
- clrbits_8(pixis_base + PIXIS_VBOOT, CFG_SYS_PIXIS_VBOOT_MASK);
-}
-
-/* Tell the PIXIS to boot from the alternate flash bank
- *
- * Program the alternate flash bank into the VBOOT register. This register is
- * used only if PX_VCFGEN1[FLASH]=1.
- */
-static void set_altbank(void)
-{
- setbits_8(pixis_base + PIXIS_VBOOT, CFG_SYS_PIXIS_VBOOT_MASK);
-}
-
-/* Reset the board with watchdog disabled.
- *
- * This respects the altbank setting.
- */
-static void set_px_go(void)
-{
- /* Disable the VELA sequencer and watchdog */
- clrbits_8(pixis_base + PIXIS_VCTL, 9);
-
- /* Reboot by starting the VELA sequencer */
- setbits_8(pixis_base + PIXIS_VCTL, 0x1);
-
- while (1);
-}
-
-/* Reset the board with watchdog enabled.
- *
- * This respects the altbank setting.
- */
-static void set_px_go_with_watchdog(void)
-{
- /* Disable the VELA sequencer */
- clrbits_8(pixis_base + PIXIS_VCTL, 1);
-
- /* Enable the watchdog and reboot by starting the VELA sequencer */
- setbits_8(pixis_base + PIXIS_VCTL, 0x9);
-
- while (1);
-}
-
-/* Disable the watchdog
- *
- */
-static int pixis_disable_watchdog_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
- char *const argv[])
-{
- /* Disable the VELA sequencer and the watchdog */
- clrbits_8(pixis_base + PIXIS_VCTL, 9);
-
- return 0;
-}
-
-U_BOOT_CMD(
- diswd, 1, 0, pixis_disable_watchdog_cmd,
- "Disable watchdog timer",
- ""
-);
-
-/*
- * This function takes the non-integral cpu:mpx pll ratio
- * and converts it to an integer that can be used to assign
- * FPGA register values.
- * input: strptr i.e. argv[2]
- */
-static unsigned long strfractoint(char *strptr)
-{
- int i, j;
- int mulconst;
- int no_dec = 0;
- unsigned long intval = 0, decval = 0;
- char intarr[3], decarr[3];
-
- /* Assign the integer part to intarr[]
- * If there is no decimal point i.e.
- * if the ratio is an integral value
- * simply create the intarr.
- */
- i = 0;
- while (strptr[i] != '.') {
- if (strptr[i] == 0) {
- no_dec = 1;
- break;
- }
- intarr[i] = strptr[i];
- i++;
- }
-
- intarr[i] = '\0';
-
- if (no_dec) {
- /* Currently needed only for single digit corepll ratios */
- mulconst = 10;
- decval = 0;
- } else {
- j = 0;
- i++; /* Skipping the decimal point */
- while ((strptr[i] >= '0') && (strptr[i] <= '9')) {
- decarr[j] = strptr[i];
- i++;
- j++;
- }
-
- decarr[j] = '\0';
-
- mulconst = 1;
- for (i = 0; i < j; i++)
- mulconst *= 10;
- decval = dectoul(decarr, NULL);
- }
-
- intval = dectoul(intarr, NULL);
- intval = intval * mulconst;
-
- return intval + decval;
-}
-
-static int pixis_reset_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
- char *const argv[])
-{
- unsigned int i;
- char *p_cf = NULL;
- char *p_cf_sysclk = NULL;
- char *p_cf_corepll = NULL;
- char *p_cf_mpxpll = NULL;
- char *p_altbank = NULL;
- char *p_wd = NULL;
- int unknown_param = 0;
-
- /*
- * No args is a simple reset request.
- */
- if (argc <= 1) {
- pixis_reset();
- /* not reached */
- }
-
- for (i = 1; i < argc; i++) {
- if (strcmp(argv[i], "cf") == 0) {
- p_cf = argv[i];
- if (i + 3 >= argc) {
- break;
- }
- p_cf_sysclk = argv[i+1];
- p_cf_corepll = argv[i+2];
- p_cf_mpxpll = argv[i+3];
- i += 3;
- continue;
- }
-
- if (strcmp(argv[i], "altbank") == 0) {
- p_altbank = argv[i];
- continue;
- }
-
- if (strcmp(argv[i], "wd") == 0) {
- p_wd = argv[i];
- continue;
- }
-
- unknown_param = 1;
- }
-
- /*
- * Check that cf has all required parms
- */
- if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
- || unknown_param) {
-#ifdef CONFIG_SYS_LONGHELP
- puts(cmdtp->help);
- putc('\n');
-#endif
- return 1;
- }
-
- /*
- * PIXIS seems to be sensitive to the ordering of
- * the registers that are touched.
- */
- read_from_px_regs(0);
-
- if (p_altbank)
- read_from_px_regs_altbank(0);
-
- clear_altbank();
-
- /*
- * Clock configuration specified.
- */
- if (p_cf) {
- unsigned long sysclk;
- unsigned long corepll;
- unsigned long mpxpll;
-
- sysclk = dectoul(p_cf_sysclk, NULL);
- corepll = strfractoint(p_cf_corepll);
- mpxpll = dectoul(p_cf_mpxpll, NULL);
-
- if (!(set_px_sysclk(sysclk)
- && set_px_corepll(corepll)
- && set_px_mpxpll(mpxpll))) {
-#ifdef CONFIG_SYS_LONGHELP
- puts(cmdtp->help);
- putc('\n');
-#endif
- return 1;
- }
- read_from_px_regs(1);
- }
-
- /*
- * Altbank specified
- *
- * NOTE CHANGE IN BEHAVIOR: previous code would default
- * to enabling watchdog if altbank is specified.
- * Now the watchdog must be enabled explicitly using 'wd'.
- */
- if (p_altbank) {
- set_altbank();
- read_from_px_regs_altbank(1);
- }
-
- /*
- * Reset with watchdog specified.
- */
- if (p_wd)
- set_px_go_with_watchdog();
- else
- set_px_go();
-
- /*
- * Shouldn't be reached.
- */
- return 0;
-}
-
-
-U_BOOT_CMD(
- pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
- "Reset the board using the FPGA sequencer",
- " pixis_reset\n"
- " pixis_reset [altbank]\n"
- " pixis_reset altbank wd\n"
- " pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
- " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>"
-);
diff --git a/board/freescale/common/pixis.h b/board/freescale/common/pixis.h
deleted file mode 100644
index f19e85cb1c9..00000000000
--- a/board/freescale/common/pixis.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2010 Freescale Semiconductor, Inc.
- */
-#ifndef __PIXIS_H_
-#define __PIXIS_H_ 1
-
-/* PIXIS register set. */
-#if defined(CONFIG_TARGET_MPC8536DS)
-typedef struct pixis {
- u8 id;
- u8 ver;
- u8 pver;
- u8 csr;
- u8 rst;
- u8 rst2;
- u8 aux1;
- u8 spd;
- u8 aux2;
- u8 csr2;
- u8 watch;
- u8 led;
- u8 pwr;
- u8 res[3];
- u8 vctl;
- u8 vstat;
- u8 vcfgen0;
- u8 vcfgen1;
- u8 vcore0;
- u8 res1;
- u8 vboot;
- u8 vspeed[3];
- u8 sclk[3];
- u8 dclk[3];
- u8 i2cdacr;
- u8 vcoreacc[4];
- u8 vcorecnt[3];
- u8 vcoremax[2];
- u8 vplatacc[4];
- u8 vplatcnt[3];
- u8 vplatmax[2];
- u8 vtempacc[4];
- u8 vtempcnt[3];
- u8 vtempmax[2];
- u8 res2[4];
-} __attribute__ ((packed)) pixis_t;
-#else
-#error Need to define pixis_t for this board
-#endif
-
-/* Pointer to the PIXIS register set */
-#define pixis ((pixis_t *)PIXIS_BASE)
-
-#endif /* __PIXIS_H_ */
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 26/87] freescale: Drop unused ftpmu010 driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (24 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 25/87] freescale: Drop unused pixis code Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 27/87] rcar: Drop timer Simon Glass
` (61 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
Drop this unused code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/power/Makefile | 1 -
drivers/power/ftpmu010.c | 87 --------------
include/faraday/ftpmu010.h | 234 -------------------------------------
3 files changed, 322 deletions(-)
delete mode 100644 drivers/power/ftpmu010.c
delete mode 100644 include/faraday/ftpmu010.h
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index f805027784d..34a84808a9c 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_AXP305_POWER) += axp305.o
obj-$(CONFIG_AXP809_POWER) += axp809.o
obj-$(CONFIG_AXP818_POWER) += axp818.o
obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
-obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o
obj-$(CONFIG_SY8106A_POWER) += sy8106a.o
obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o
obj-$(CONFIG_TWL4030_POWER) += twl4030.o
diff --git a/drivers/power/ftpmu010.c b/drivers/power/ftpmu010.c
deleted file mode 100644
index 9a48b36554d..00000000000
--- a/drivers/power/ftpmu010.c
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * Copyright (C) 2010 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <faraday/ftpmu010.h>
-
-/* OSCC: OSC Control Register */
-void ftpmu010_32768osc_enable(void)
-{
- static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE;
- unsigned int oscc;
-
- /* enable the 32768Hz oscillator */
- oscc = readl(&pmu->OSCC);
- oscc &= ~(FTPMU010_OSCC_OSCL_OFF | FTPMU010_OSCC_OSCL_TRI);
- writel(oscc, &pmu->OSCC);
-
- /* wait until ready */
- while (!(readl(&pmu->OSCC) & FTPMU010_OSCC_OSCL_STABLE))
- ;
-
- /* select 32768Hz oscillator */
- oscc = readl(&pmu->OSCC);
- oscc |= FTPMU010_OSCC_OSCL_RTCLSEL;
- writel(oscc, &pmu->OSCC);
-}
-
-/* MFPSR: Multi-Function Port Setting Register */
-void ftpmu010_mfpsr_select_dev(unsigned int dev)
-{
- static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE;
- unsigned int mfpsr;
-
- mfpsr = readl(&pmu->MFPSR);
- mfpsr |= dev;
- writel(mfpsr, &pmu->MFPSR);
-}
-
-void ftpmu010_mfpsr_diselect_dev(unsigned int dev)
-{
- static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE;
- unsigned int mfpsr;
-
- mfpsr = readl(&pmu->MFPSR);
- mfpsr &= ~dev;
- writel(mfpsr, &pmu->MFPSR);
-}
-
-/* PDLLCR0: PLL/DLL Control Register 0 */
-void ftpmu010_dlldis_disable(void)
-{
- static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE;
- unsigned int pdllcr0;
-
- pdllcr0 = readl(&pmu->PDLLCR0);
- pdllcr0 |= FTPMU010_PDLLCR0_DLLDIS;
- writel(pdllcr0, &pmu->PDLLCR0);
-}
-
-void ftpmu010_sdram_clk_disable(unsigned int cr0)
-{
- static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE;
- unsigned int pdllcr0;
-
- pdllcr0 = readl(&pmu->PDLLCR0);
- pdllcr0 |= FTPMU010_PDLLCR0_HCLKOUTDIS(cr0);
- writel(pdllcr0, &pmu->PDLLCR0);
-}
-
-/* SDRAMHTC: SDRAM Signal Hold Time Control */
-void ftpmu010_sdramhtc_set(unsigned int val)
-{
- static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE;
- unsigned int sdramhtc;
-
- sdramhtc = readl(&pmu->SDRAMHTC);
- sdramhtc |= val;
- writel(sdramhtc, &pmu->SDRAMHTC);
-}
diff --git a/include/faraday/ftpmu010.h b/include/faraday/ftpmu010.h
deleted file mode 100644
index ccb7805375e..00000000000
--- a/include/faraday/ftpmu010.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- */
-
-/*
- * Power Management Unit
- */
-#ifndef __FTPMU010_H
-#define __FTPMU010_H
-
-#ifndef __ASSEMBLY__
-struct ftpmu010 {
- unsigned int IDNMBR0; /* 0x00 */
- unsigned int reserved0; /* 0x04 */
- unsigned int OSCC; /* 0x08 */
- unsigned int PMODE; /* 0x0C */
- unsigned int PMCR; /* 0x10 */
- unsigned int PED; /* 0x14 */
- unsigned int PEDSR; /* 0x18 */
- unsigned int reserved1; /* 0x1C */
- unsigned int PMSR; /* 0x20 */
- unsigned int PGSR; /* 0x24 */
- unsigned int MFPSR; /* 0x28 */
- unsigned int MISC; /* 0x2C */
- unsigned int PDLLCR0; /* 0x30 */
- unsigned int PDLLCR1; /* 0x34 */
- unsigned int AHBMCLKOFF; /* 0x38 */
- unsigned int APBMCLKOFF; /* 0x3C */
- unsigned int DCSRCR0; /* 0x40 */
- unsigned int DCSRCR1; /* 0x44 */
- unsigned int DCSRCR2; /* 0x48 */
- unsigned int SDRAMHTC; /* 0x4C */
- unsigned int PSPR0; /* 0x50 */
- unsigned int PSPR1; /* 0x54 */
- unsigned int PSPR2; /* 0x58 */
- unsigned int PSPR3; /* 0x5C */
- unsigned int PSPR4; /* 0x60 */
- unsigned int PSPR5; /* 0x64 */
- unsigned int PSPR6; /* 0x68 */
- unsigned int PSPR7; /* 0x6C */
- unsigned int PSPR8; /* 0x70 */
- unsigned int PSPR9; /* 0x74 */
- unsigned int PSPR10; /* 0x78 */
- unsigned int PSPR11; /* 0x7C */
- unsigned int PSPR12; /* 0x80 */
- unsigned int PSPR13; /* 0x84 */
- unsigned int PSPR14; /* 0x88 */
- unsigned int PSPR15; /* 0x8C */
- unsigned int AHBDMA_RACCS; /* 0x90 */
- unsigned int reserved2; /* 0x94 */
- unsigned int reserved3; /* 0x98 */
- unsigned int JSS; /* 0x9C */
- unsigned int CFC_RACC; /* 0xA0 */
- unsigned int SSP1_RACC; /* 0xA4 */
- unsigned int UART1TX_RACC; /* 0xA8 */
- unsigned int UART1RX_RACC; /* 0xAC */
- unsigned int UART2TX_RACC; /* 0xB0 */
- unsigned int UART2RX_RACC; /* 0xB4 */
- unsigned int SDC_RACC; /* 0xB8 */
- unsigned int I2SAC97_RACC; /* 0xBC */
- unsigned int IRDATX_RACC; /* 0xC0 */
- unsigned int reserved4; /* 0xC4 */
- unsigned int USBD_RACC; /* 0xC8 */
- unsigned int IRDARX_RACC; /* 0xCC */
- unsigned int IRDA_RACC; /* 0xD0 */
- unsigned int ED0_RACC; /* 0xD4 */
- unsigned int ED1_RACC; /* 0xD8 */
-};
-#endif /* __ASSEMBLY__ */
-
-/*
- * ID Number 0 Register
- */
-#define FTPMU010_ID_A320A 0x03200000
-#define FTPMU010_ID_A320C 0x03200010
-#define FTPMU010_ID_A320D 0x03200030
-
-/*
- * OSC Control Register
- */
-#define FTPMU010_OSCC_OSCH_TRI (1 << 11)
-#define FTPMU010_OSCC_OSCH_STABLE (1 << 9)
-#define FTPMU010_OSCC_OSCH_OFF (1 << 8)
-
-#define FTPMU010_OSCC_OSCL_TRI (1 << 3)
-#define FTPMU010_OSCC_OSCL_RTCLSEL (1 << 2)
-#define FTPMU010_OSCC_OSCL_STABLE (1 << 1)
-#define FTPMU010_OSCC_OSCL_OFF (1 << 0)
-
-/*
- * Power Mode Register
- */
-#define FTPMU010_PMODE_DIVAHBCLK_MASK (0x7 << 4)
-#define FTPMU010_PMODE_DIVAHBCLK_2 (0x0 << 4)
-#define FTPMU010_PMODE_DIVAHBCLK_3 (0x1 << 4)
-#define FTPMU010_PMODE_DIVAHBCLK_4 (0x2 << 4)
-#define FTPMU010_PMODE_DIVAHBCLK_6 (0x3 << 4)
-#define FTPMU010_PMODE_DIVAHBCLK_8 (0x4 << 4)
-#define FTPMU010_PMODE_DIVAHBCLK(pmode) (((pmode) >> 4) & 0x7)
-#define FTPMU010_PMODE_FCS (1 << 2)
-#define FTPMU010_PMODE_TURBO (1 << 1)
-#define FTPMU010_PMODE_SLEEP (1 << 0)
-
-/*
- * Power Manager Status Register
- */
-#define FTPMU010_PMSR_SMR (1 << 10)
-
-#define FTPMU010_PMSR_RDH (1 << 2)
-#define FTPMU010_PMSR_PH (1 << 1)
-#define FTPMU010_PMSR_CKEHLOW (1 << 0)
-
-/*
- * Multi-Function Port Setting Register
- */
-#define FTPMU010_MFPSR_DEBUGSEL (1 << 17)
-#define FTPMU010_MFPSR_DMA0PINSEL (1 << 16)
-#define FTPMU010_MFPSR_DMA1PINSEL (1 << 15)
-#define FTPMU010_MFPSR_MODEMPINSEL (1 << 14)
-#define FTPMU010_MFPSR_AC97CLKOUTSEL (1 << 13)
-#define FTPMU010_MFPSR_PWM1PINSEL (1 << 11)
-#define FTPMU010_MFPSR_PWM0PINSEL (1 << 10)
-#define FTPMU010_MFPSR_IRDACLKSEL (1 << 9)
-#define FTPMU010_MFPSR_UARTCLKSEL (1 << 8)
-#define FTPMU010_MFPSR_SSPCLKSEL (1 << 6)
-#define FTPMU010_MFPSR_I2SCLKSEL (1 << 5)
-#define FTPMU010_MFPSR_AC97CLKSEL (1 << 4)
-#define FTPMU010_MFPSR_AC97PINSEL (1 << 3)
-#define FTPMU010_MFPSR_TRIAHBDIS (1 << 1)
-#define FTPMU010_MFPSR_TRIAHBDBG (1 << 0)
-
-/*
- * PLL/DLL Control Register 0
- * Note:
- * 1. FTPMU010_PDLLCR0_HCLKOUTDIS:
- * Datasheet indicated it starts at bit #21 which was wrong.
- * 2. FTPMU010_PDLLCR0_DLLFRAG:
- * Datasheet indicated it has 2 bit which was wrong.
- */
-#define FTPMU010_PDLLCR0_HCLKOUTDIS(cr0) (((cr0) & 0xf) << 20)
-#define FTPMU010_PDLLCR0_DLLFRAG(cr0) (1 << 19)
-#define FTPMU010_PDLLCR0_DLLSTSEL (1 << 18)
-#define FTPMU010_PDLLCR0_DLLSTABLE (1 << 17)
-#define FTPMU010_PDLLCR0_DLLDIS (1 << 16)
-#define FTPMU010_PDLLCR0_PLL1FRANG(cr0) (((cr0) & 0x3) << 12)
-#define FTPMU010_PDLLCR0_PLL1NS(cr0) (((cr0) & 0x1ff) << 3)
-#define FTPMU010_PDLLCR0_PLL1STSEL (1 << 2)
-#define FTPMU010_PDLLCR0_PLL1STABLE (1 << 1)
-#define FTPMU010_PDLLCR0_PLL1DIS (1 << 0)
-
-/*
- * SDRAM Signal Hold Time Control Register
- */
-#define FTPMU010_SDRAMHTC_RCLK_DLY(x) (((x) & 0xf) << 28)
-#define FTPMU010_SDRAMHTC_CTL_WCLK_DLY(x) (((x) & 0xf) << 24)
-#define FTPMU010_SDRAMHTC_DAT_WCLK_DLY(x) (((x) & 0xf) << 20)
-#define FTPMU010_SDRAMHTC_EBICTRL_DCSR (1 << 18)
-#define FTPMU010_SDRAMHTC_EBIDATA_DCSR (1 << 17)
-#define FTPMU010_SDRAMHTC_SDRAMCS_DCSR (1 << 16)
-#define FTPMU010_SDRAMHTC_SDRAMCTL_DCSR (1 << 15)
-#define FTPMU010_SDRAMHTC_CKE_DCSR (1 << 14)
-#define FTPMU010_SDRAMHTC_DQM_DCSR (1 << 13)
-#define FTPMU010_SDRAMHTC_SDCLK_DCSR (1 << 12)
-
-#ifndef __ASSEMBLY__
-void ftpmu010_32768osc_enable(void);
-void ftpmu010_dlldis_disable(void);
-void ftpmu010_mfpsr_diselect_dev(unsigned int dev);
-void ftpmu010_mfpsr_select_dev(unsigned int dev);
-void ftpmu010_sdram_clk_disable(unsigned int cr0);
-void ftpmu010_sdramhtc_set(unsigned int val);
-#endif
-
-#ifdef __ASSEMBLY__
-#define FTPMU010_IDNMBR0 0x00
-#define FTPMU010_reserved0 0x04
-#define FTPMU010_OSCC 0x08
-#define FTPMU010_PMODE 0x0C
-#define FTPMU010_PMCR 0x10
-#define FTPMU010_PED 0x14
-#define FTPMU010_PEDSR 0x18
-#define FTPMU010_reserved1 0x1C
-#define FTPMU010_PMSR 0x20
-#define FTPMU010_PGSR 0x24
-#define FTPMU010_MFPSR 0x28
-#define FTPMU010_MISC 0x2C
-#define FTPMU010_PDLLCR0 0x30
-#define FTPMU010_PDLLCR1 0x34
-#define FTPMU010_AHBMCLKOFF 0x38
-#define FTPMU010_APBMCLKOFF 0x3C
-#define FTPMU010_DCSRCR0 0x40
-#define FTPMU010_DCSRCR1 0x44
-#define FTPMU010_DCSRCR2 0x48
-#define FTPMU010_SDRAMHTC 0x4C
-#define FTPMU010_PSPR0 0x50
-#define FTPMU010_PSPR1 0x54
-#define FTPMU010_PSPR2 0x58
-#define FTPMU010_PSPR3 0x5C
-#define FTPMU010_PSPR4 0x60
-#define FTPMU010_PSPR5 0x64
-#define FTPMU010_PSPR6 0x68
-#define FTPMU010_PSPR7 0x6C
-#define FTPMU010_PSPR8 0x70
-#define FTPMU010_PSPR9 0x74
-#define FTPMU010_PSPR10 0x78
-#define FTPMU010_PSPR11 0x7C
-#define FTPMU010_PSPR12 0x80
-#define FTPMU010_PSPR13 0x84
-#define FTPMU010_PSPR14 0x88
-#define FTPMU010_PSPR15 0x8C
-#define FTPMU010_AHBDMA_RACCS 0x90
-#define FTPMU010_reserved2 0x94
-#define FTPMU010_reserved3 0x98
-#define FTPMU010_JSS 0x9C
-#define FTPMU010_CFC_RACC 0xA0
-#define FTPMU010_SSP1_RACC 0xA4
-#define FTPMU010_UART1TX_RACC 0xA8
-#define FTPMU010_UART1RX_RACC 0xAC
-#define FTPMU010_UART2TX_RACC 0xB0
-#define FTPMU010_UART2RX_RACC 0xB4
-#define FTPMU010_SDC_RACC 0xB8
-#define FTPMU010_I2SAC97_RACC 0xBC
-#define FTPMU010_IRDATX_RACC 0xC0
-#define FTPMU010_reserved4 0xC4
-#define FTPMU010_USBD_RACC 0xC8
-#define FTPMU010_IRDARX_RACC 0xCC
-#define FTPMU010_IRDA_RACC 0xD0
-#define FTPMU010_ED0_RACC 0xD4
-#define FTPMU010_ED1_RACC 0xD8
-#endif /* __ASSEMBLY__ */
-
-#endif /* __FTPMU010_H */
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 27/87] rcar: Drop timer
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (25 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 26/87] freescale: Drop unused ftpmu010 driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 28/87] i2c: Rename I2C_MUX_PCA954x Simon Glass
` (60 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
Drop this unused driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/mach-rmobile/Makefile | 1 -
arch/arm/mach-rmobile/timer.c | 87 ----------------------------------
2 files changed, 88 deletions(-)
delete mode 100644 arch/arm/mach-rmobile/timer.c
diff --git a/arch/arm/mach-rmobile/Makefile b/arch/arm/mach-rmobile/Makefile
index 195bbeb5c88..3f77760e50d 100644
--- a/arch/arm/mach-rmobile/Makefile
+++ b/arch/arm/mach-rmobile/Makefile
@@ -7,7 +7,6 @@ obj-y = cpu_info.o
obj-y += emac.o
obj-$(CONFIG_DISPLAY_BOARDINFO) += board.o
-obj-$(CONFIG_GLOBAL_TIMER) += timer.o
obj-$(CONFIG_TMU_TIMER) += ../../sh/lib/time.o
obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o
obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o
diff --git a/arch/arm/mach-rmobile/timer.c b/arch/arm/mach-rmobile/timer.c
deleted file mode 100644
index 293c23b5e25..00000000000
--- a/arch/arm/mach-rmobile/timer.c
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * (C) Copyright 2012 Renesas Solutions Corp.
- */
-
-#include <common.h>
-#include <div64.h>
-#include <init.h>
-#include <time.h>
-#include <asm/io.h>
-#include <asm/arch-armv7/globaltimer.h>
-#include <asm/arch/rmobile.h>
-#include <linux/delay.h>
-
-static struct globaltimer *global_timer = \
- (struct globaltimer *)GLOBAL_TIMER_BASE_ADDR;
-
-#define CLK2MHZ(clk) (clk / 1000 / 1000)
-static u64 get_cpu_global_timer(void)
-{
- u32 low, high;
- u64 timer;
-
- u32 old = readl(&global_timer->cnt_h);
- while (1) {
- low = readl(&global_timer->cnt_l);
- high = readl(&global_timer->cnt_h);
- if (old == high)
- break;
- else
- old = high;
- }
-
- timer = high;
- return (u64)((timer << 32) | low);
-}
-
-static u64 get_time_us(void)
-{
- u64 timer = get_cpu_global_timer();
-
- timer = ((timer << 2) + (CLK2MHZ(CFG_SYS_CPU_CLK) >> 1));
- do_div(timer, CLK2MHZ(CFG_SYS_CPU_CLK));
- return timer;
-}
-
-static ulong get_time_ms(void)
-{
- u64 us = get_time_us();
-
- do_div(us, 1000);
- return us;
-}
-
-int timer_init(void)
-{
- writel(0x01, &global_timer->ctl);
- return 0;
-}
-
-void __udelay(unsigned long usec)
-{
- u64 start, current;
- u64 wait;
-
- start = get_cpu_global_timer();
- wait = (u64)((usec * CLK2MHZ(CFG_SYS_CPU_CLK)) >> 2);
- do {
- current = get_cpu_global_timer();
- } while ((current - start) < wait);
-}
-
-ulong get_timer(ulong base)
-{
- return get_time_ms() - base;
-}
-
-unsigned long long get_ticks(void)
-{
- return get_cpu_global_timer();
-}
-
-ulong get_tbclk(void)
-{
- return (ulong)(CFG_SYS_CPU_CLK >> 2);
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 28/87] i2c: Rename I2C_MUX_PCA954x
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (26 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 27/87] rcar: Drop timer Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 29/87] imx: Drop unused CONFIG_IMX Simon Glass
` (59 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Heiko Schocher
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
---
(no changes since v1)
arch/arm/mach-mvebu/Kconfig | 2 +-
configs/SBx81LIFKW_defconfig | 2 +-
configs/SBx81LIFXCAT_defconfig | 2 +-
configs/cgtqmx8_defconfig | 2 +-
configs/ge_bx50v3_defconfig | 2 +-
configs/imx8qm_mek_defconfig | 2 +-
configs/imx8qm_rom7720_a1_4G_defconfig | 2 +-
configs/imx8qxp_mek_defconfig | 2 +-
configs/kmcent2_defconfig | 2 +-
configs/kmcoge5ne_defconfig | 2 +-
configs/kmeter1_defconfig | 2 +-
configs/kmopti2_defconfig | 2 +-
configs/kmsupx5_defconfig | 2 +-
configs/kmtepr2_defconfig | 2 +-
configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 2 +-
configs/ls1028aqds_tfa_defconfig | 2 +-
configs/ls1028aqds_tfa_lpuart_defconfig | 2 +-
configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 2 +-
configs/ls1028ardb_tfa_defconfig | 2 +-
configs/ls1088aqds_tfa_defconfig | 2 +-
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 2 +-
configs/ls1088ardb_tfa_defconfig | 2 +-
configs/ls2088aqds_tfa_defconfig | 2 +-
configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 2 +-
configs/ls2088ardb_tfa_defconfig | 2 +-
configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 2 +-
configs/lx2160aqds_tfa_defconfig | 2 +-
configs/lx2162aqds_tfa_SECURE_BOOT_defconfig | 2 +-
configs/lx2162aqds_tfa_defconfig | 2 +-
configs/lx2162aqds_tfa_verified_boot_defconfig | 2 +-
configs/mvebu_puzzle-m801-88f8040_defconfig | 2 +-
configs/mx53ppd_defconfig | 2 +-
configs/octeontx2_96xx_defconfig | 2 +-
configs/tuge1_defconfig | 2 +-
configs/tuxx1_defconfig | 2 +-
configs/x530_defconfig | 2 +-
configs/xilinx_versal_net_virt_defconfig | 2 +-
configs/xilinx_versal_virt_defconfig | 2 +-
configs/xilinx_zynq_virt_defconfig | 2 +-
configs/xilinx_zynqmp_virt_defconfig | 2 +-
drivers/i2c/muxes/Kconfig | 2 +-
drivers/i2c/muxes/Makefile | 2 +-
42 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 594e9a03d90..71676be84b2 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -133,7 +133,7 @@ config TARGET_TURRIS_OMNIA
select BOARD_LATE_INIT
select DM_I2C
select I2C_MUX
- select I2C_MUX_PCA954x
+ select I2C_MUX_PCA954X
select SPL_DRIVERS_MISC
select SPL_I2C_MUX
select SPL_SYS_MALLOC_SIMPLE
diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig
index e53f2489c5d..a94da5a017a 100644
--- a/configs/SBx81LIFKW_defconfig
+++ b/configs/SBx81LIFKW_defconfig
@@ -47,7 +47,7 @@ CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig
index 80dbbb11c9b..da493c29ffc 100644
--- a/configs/SBx81LIFXCAT_defconfig
+++ b/configs/SBx81LIFXCAT_defconfig
@@ -47,7 +47,7 @@ CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig
index 019701010ac..a0d24b4d534 100644
--- a/configs/cgtqmx8_defconfig
+++ b/configs/cgtqmx8_defconfig
@@ -78,7 +78,7 @@ CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_IMX_LPI2C=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_MISC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index 82f6cc3f824..80667ee79cd 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -54,7 +54,7 @@ CONFIG_DM_BOOTCOUNT_I2C_EEPROM=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SUPPORT_EMMC_BOOT=y
diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
index 4fc828681b6..ef9c1130ab6 100644
--- a/configs/imx8qm_mek_defconfig
+++ b/configs/imx8qm_mek_defconfig
@@ -81,7 +81,7 @@ CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_IMX_LPI2C=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig b/configs/imx8qm_rom7720_a1_4G_defconfig
index 7819bef8638..0246b2a966a 100644
--- a/configs/imx8qm_rom7720_a1_4G_defconfig
+++ b/configs/imx8qm_rom7720_a1_4G_defconfig
@@ -68,7 +68,7 @@ CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_IMX_LPI2C=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_MISC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index a00951a3b03..ef86485badf 100644
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -84,7 +84,7 @@ CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_IMX_LPI2C=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
diff --git a/configs/kmcent2_defconfig b/configs/kmcent2_defconfig
index bd4943006c1..d9aae79bc2b 100644
--- a/configs/kmcent2_defconfig
+++ b/configs/kmcent2_defconfig
@@ -69,7 +69,7 @@ CONFIG_SYS_FSL_DDR3=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_FSL=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig
index 4ea7da8d32c..c8897003c10 100644
--- a/configs/kmcoge5ne_defconfig
+++ b/configs/kmcoge5ne_defconfig
@@ -222,7 +222,7 @@ CONFIG_SYS_OR4_PRELIM=0xF0000E25
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_FSL=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig
index 96298ed0c38..573dc4c5c4e 100644
--- a/configs/kmeter1_defconfig
+++ b/configs/kmeter1_defconfig
@@ -188,7 +188,7 @@ CONFIG_SYS_OR3_PRELIM=0xF0000E25
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_FSL=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig
index db717e4a15d..895ac4649a2 100644
--- a/configs/kmopti2_defconfig
+++ b/configs/kmopti2_defconfig
@@ -203,7 +203,7 @@ CONFIG_SYS_OR3_PRELIM=0xF0000040
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_FSL=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig
index 69de685bafd..e99c55e47a1 100644
--- a/configs/kmsupx5_defconfig
+++ b/configs/kmsupx5_defconfig
@@ -180,7 +180,7 @@ CONFIG_SYS_OR2_PRELIM=0xF0000C25
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_FSL=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig
index 92f2b0adecd..fd206f3d0e6 100644
--- a/configs/kmtepr2_defconfig
+++ b/configs/kmtepr2_defconfig
@@ -202,7 +202,7 @@ CONFIG_SYS_OR3_PRELIM=0xF0000040
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_FSL=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
index 525c7df6d0f..6913addf265 100644
--- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
@@ -58,7 +58,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig
index dde204eaa0d..43ac651507b 100644
--- a/configs/ls1028aqds_tfa_defconfig
+++ b/configs/ls1028aqds_tfa_defconfig
@@ -64,7 +64,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig
index 8cd90863a1c..10ed3d50131 100644
--- a/configs/ls1028aqds_tfa_lpuart_defconfig
+++ b/configs/ls1028aqds_tfa_lpuart_defconfig
@@ -63,7 +63,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index b8df245025f..49ca58a753b 100644
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -56,7 +56,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 5b1cf988cf0..4110f7c7ef7 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -62,7 +62,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig
index c8ab5723539..4310df41ece 100644
--- a/configs/ls1088aqds_tfa_defconfig
+++ b/configs/ls1088aqds_tfa_defconfig
@@ -75,7 +75,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_ESDHC_DETECT_QUIRK=y
diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
index 0ec80be2ea6..f1bb25c7c71 100644
--- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@@ -64,7 +64,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig
index 27323be4089..f4aaca00673 100644
--- a/configs/ls1088ardb_tfa_defconfig
+++ b/configs/ls1088ardb_tfa_defconfig
@@ -70,7 +70,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig
index a9faa1525ac..31c5fa7a2f7 100644
--- a/configs/ls2088aqds_tfa_defconfig
+++ b/configs/ls2088aqds_tfa_defconfig
@@ -72,7 +72,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_ESDHC_DETECT_QUIRK=y
diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
index 1dd7c1dd808..e290dad5711 100644
--- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
@@ -67,7 +67,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig
index 246ab403754..03c48d7a850 100644
--- a/configs/ls2088ardb_tfa_defconfig
+++ b/configs/ls2088ardb_tfa_defconfig
@@ -74,7 +74,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index ea3f2acaeb2..b47af2a883c 100644
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -67,7 +67,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_ESDHC_DETECT_QUIRK=y
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
index 9be7ac9c282..11d934509d0 100644
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -74,7 +74,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_ESDHC_DETECT_QUIRK=y
diff --git a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
index ad1b1234c01..acd778a624c 100644
--- a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
@@ -69,7 +69,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_ESDHC=y
diff --git a/configs/lx2162aqds_tfa_defconfig b/configs/lx2162aqds_tfa_defconfig
index ee37dfd83d8..de43d6c5e1f 100644
--- a/configs/lx2162aqds_tfa_defconfig
+++ b/configs/lx2162aqds_tfa_defconfig
@@ -76,7 +76,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_HS400_SUPPORT=y
diff --git a/configs/lx2162aqds_tfa_verified_boot_defconfig b/configs/lx2162aqds_tfa_verified_boot_defconfig
index 0fe96e37999..3cf10e8bab5 100644
--- a/configs/lx2162aqds_tfa_verified_boot_defconfig
+++ b/configs/lx2162aqds_tfa_verified_boot_defconfig
@@ -77,7 +77,7 @@ CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_HS400_SUPPORT=y
diff --git a/configs/mvebu_puzzle-m801-88f8040_defconfig b/configs/mvebu_puzzle-m801-88f8040_defconfig
index 06112b373b2..e2b735ee6bb 100644
--- a/configs/mvebu_puzzle-m801-88f8040_defconfig
+++ b/configs/mvebu_puzzle-m801-88f8040_defconfig
@@ -57,7 +57,7 @@ CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_MISC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_XENON=y
diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig
index 055dbcb0335..59ca8b639aa 100644
--- a/configs/mx53ppd_defconfig
+++ b/configs/mx53ppd_defconfig
@@ -49,7 +49,7 @@ CONFIG_DM_BOOTCOUNT_I2C_EEPROM=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_MISC=y
CONFIG_FSL_IIM=y
CONFIG_I2C_EEPROM=y
diff --git a/configs/octeontx2_96xx_defconfig b/configs/octeontx2_96xx_defconfig
index 061464d7903..46e963b1d63 100644
--- a/configs/octeontx2_96xx_defconfig
+++ b/configs/octeontx2_96xx_defconfig
@@ -87,7 +87,7 @@ CONFIG_AHCI_PCI=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_MISC=y
CONFIG_SYS_MMC_MAX_BLK_COUNT=8192
CONFIG_SUPPORT_EMMC_RPMB=y
diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig
index 0c3381461eb..3301a7f936b 100644
--- a/configs/tuge1_defconfig
+++ b/configs/tuge1_defconfig
@@ -180,7 +180,7 @@ CONFIG_SYS_OR2_PRELIM=0xF0000C25
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_FSL=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig
index 4f192ad2624..02b369beacf 100644
--- a/configs/tuxx1_defconfig
+++ b/configs/tuxx1_defconfig
@@ -204,7 +204,7 @@ CONFIG_SYS_OR3_PRELIM=0xF0000E24
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_FSL=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/x530_defconfig b/configs/x530_defconfig
index 70c08adcde9..c0128f623da 100644
--- a/configs/x530_defconfig
+++ b/configs/x530_defconfig
@@ -67,7 +67,7 @@ CONFIG_SPL_OF_TRANSLATE=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
index 729c6ad4503..54e90995dee 100644
--- a/configs/xilinx_versal_net_virt_defconfig
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -68,7 +68,7 @@ CONFIG_ZYNQ_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_DM_MAILBOX=y
CONFIG_ZYNQMP_IPI=y
CONFIG_MISC=y
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index de74b705504..5c0db77cee2 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -72,7 +72,7 @@ CONFIG_FPGA_VERSALPL=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_DM_MAILBOX=y
CONFIG_ZYNQMP_IPI=y
CONFIG_MISC=y
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index 0ae771da817..08a57ede019 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -101,7 +101,7 @@ CONFIG_FPGA_ZYNQPL=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MISC=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index c40490a9f80..b28708a125a 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -141,7 +141,7 @@ CONFIG_SLG7XL45106_I2C_GPO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA954X=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MISC=y
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 323c4fbe9cc..4882e5909d3 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -25,7 +25,7 @@ config I2C_ARB_GPIO_CHALLENGE
response mechanism where masters have to claim the bus by asserting
a GPIO.
-config I2C_MUX_PCA954x
+config I2C_MUX_PCA954X
tristate "TI PCA954x I2C Mux/switches"
depends on I2C_MUX
help
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
index b690821199f..84abd059580 100644
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -3,5 +3,5 @@
# Copyright (c) 2015 Google, Inc
obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE) += i2c-arb-gpio-challenge.o
obj-$(CONFIG_I2C_MUX) += i2c-mux-uclass.o
-obj-$(CONFIG_I2C_MUX_PCA954x) += pca954x.o
+obj-$(CONFIG_I2C_MUX_PCA954X) += pca954x.o
obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 29/87] imx: Drop unused CONFIG_IMX
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (27 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 28/87] i2c: Rename I2C_MUX_PCA954x Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 30/87] arm: Drop old kona code Simon Glass
` (58 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Stefano Babic
This option does not exist, so the Makefile rule does nothing. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/cpu/arm920t/Makefile | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile
index b70822c67ab..5ac3740621c 100644
--- a/arch/arm/cpu/arm920t/Makefile
+++ b/arch/arm/cpu/arm920t/Makefile
@@ -7,8 +7,6 @@ extra-y = start.o
obj-y += cpu.o
-obj-$(CONFIG_IMX) += imx/
-
# some files can only build in ARM mode
ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 30/87] arm: Drop old kona code
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (28 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 29/87] imx: Drop unused CONFIG_IMX Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 31/87] video: Drop unused lg4573 driver Simon Glass
` (57 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Albert Aribaud
The KONA and KONA_GPIO options don't exist anymore, since this commit:
0f6807e77b0 arm: Remove bcm28155_ap board
Drop the dead code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/cpu/armv7/Makefile | 1 -
arch/arm/cpu/armv7/kona-common/Makefile | 8 -
arch/arm/cpu/armv7/kona-common/clk-stubs.c | 25 ----
.../arm/cpu/armv7/kona-common/hwinit-common.c | 17 ---
arch/arm/cpu/armv7/kona-common/reset.S | 25 ----
arch/arm/cpu/armv7/kona-common/s_init.c | 11 --
drivers/gpio/Makefile | 1 -
drivers/gpio/kona_gpio.c | 141 ------------------
8 files changed, 229 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/kona-common/Makefile
delete mode 100644 arch/arm/cpu/armv7/kona-common/clk-stubs.c
delete mode 100644 arch/arm/cpu/armv7/kona-common/hwinit-common.c
delete mode 100644 arch/arm/cpu/armv7/kona-common/reset.S
delete mode 100644 arch/arm/cpu/armv7/kona-common/s_init.c
delete mode 100644 drivers/gpio/kona_gpio.c
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index bfbd85ae64e..7d7907601ec 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_ARMV7_NONSEC) += nonsec_virt.o virt-v7.o virt-dt.o
obj-$(CONFIG_ARMV7_PSCI) += psci.o psci-common.o
obj-$(CONFIG_IPROC) += iproc-common/
-obj-$(CONFIG_KONA) += kona-common/
obj-$(CONFIG_SYS_ARCH_TIMER) += arch_timer.o
ifneq (,$(filter s5pc1xx exynos,$(SOC)))
diff --git a/arch/arm/cpu/armv7/kona-common/Makefile b/arch/arm/cpu/armv7/kona-common/Makefile
deleted file mode 100644
index 56de3d18e0e..00000000000
--- a/arch/arm/cpu/armv7/kona-common/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2013 Broadcom Corporation.
-
-obj-y += s_init.o
-obj-y += hwinit-common.o
-obj-y += clk-stubs.o
-obj-${CONFIG_KONA_RESET_S} += reset.o
diff --git a/arch/arm/cpu/armv7/kona-common/clk-stubs.c b/arch/arm/cpu/armv7/kona-common/clk-stubs.c
deleted file mode 100644
index 4eddaca8879..00000000000
--- a/arch/arm/cpu/armv7/kona-common/clk-stubs.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-#include <common.h>
-
-/*
- * These weak functions are available to kona architectures that don't
- * require clock enables from the driver code.
- */
-int __weak clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
-{
- return 0;
-}
-
-int __weak clk_bsc_enable(void *base)
-{
- return 0;
-}
-
-int __weak clk_usb_otg_enable(void *base)
-{
- return 0;
-}
diff --git a/arch/arm/cpu/armv7/kona-common/hwinit-common.c b/arch/arm/cpu/armv7/kona-common/hwinit-common.c
deleted file mode 100644
index cfc7c9fbc64..00000000000
--- a/arch/arm/cpu/armv7/kona-common/hwinit-common.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <asm/cache.h>
-#include <linux/sizes.h>
-
-#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
-void enable_caches(void)
-{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
-}
-#endif
diff --git a/arch/arm/cpu/armv7/kona-common/reset.S b/arch/arm/cpu/armv7/kona-common/reset.S
deleted file mode 100644
index eea835b341c..00000000000
--- a/arch/arm/cpu/armv7/kona-common/reset.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-.globl reset_cpu
-reset_cpu:
- ldr r1, =0x35001f00
- ldr r2, [r1]
- ldr r4, =0x80000000
- and r4, r2, r4
- ldr r3, =0xA5A500
- orr r4, r4, r3
- orr r4, r4, #0x1
-
- str r4, [r1]
-
- ldr r1, =0x35001f04
- ldr r2, [r1]
- ldr r4, =0x80000000
- and r4, r2, r4
- str r4, [r1]
-
-_loop_forever:
- b _loop_forever
diff --git a/arch/arm/cpu/armv7/kona-common/s_init.c b/arch/arm/cpu/armv7/kona-common/s_init.c
deleted file mode 100644
index 778b9176fa2..00000000000
--- a/arch/arm/cpu/armv7/kona-common/s_init.c
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Broadcom Corporation.
- */
-
-/*
- * Early system init. Currently empty.
- */
-void s_init(void)
-{
-}
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 07fca7bd33d..ec65f70c318 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_INTEL_ICH6_GPIO) += intel_ich6_gpio.o
obj-$(CONFIG_INTEL_BROADWELL_GPIO) += intel_broadwell_gpio.o
obj-$(CONFIG_IPROC_GPIO) += iproc_gpio.o
obj-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
-obj-$(CONFIG_KONA_GPIO) += kona_gpio.o
obj-$(CONFIG_MCP230XX_GPIO) += mcp230xx_gpio.o
obj-$(CONFIG_MXC_GPIO) += mxc_gpio.o
obj-$(CONFIG_MXS_GPIO) += mxs_gpio.o
diff --git a/drivers/gpio/kona_gpio.c b/drivers/gpio/kona_gpio.c
deleted file mode 100644
index 29791882a34..00000000000
--- a/drivers/gpio/kona_gpio.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <asm/arch/sysmap.h>
-
-#define GPIO_BASE (void *)GPIO2_BASE_ADDR
-
-#define GPIO_PASSWD 0x00a5a501
-#define GPIO_PER_BANK 32
-#define GPIO_MAX_BANK_NUM 8
-
-#define GPIO_BANK(gpio) ((gpio) >> 5)
-#define GPIO_BITMASK(gpio) \
- (1UL << ((gpio) & (GPIO_PER_BANK - 1)))
-
-#define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2))
-#define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2))
-#define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2))
-#define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2))
-#define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2))
-#define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2))
-#define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2))
-#define GPIO_CONTROL(bank) (0x00000100 + ((bank) << 2))
-#define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2))
-
-#define GPIO_GPPWR_OFFSET 0x00000520
-
-#define GPIO_GPCTR0_DBR_SHIFT 5
-#define GPIO_GPCTR0_DBR_MASK 0x000001e0
-
-#define GPIO_GPCTR0_ITR_SHIFT 3
-#define GPIO_GPCTR0_ITR_MASK 0x00000018
-#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001
-#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002
-#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003
-
-#define GPIO_GPCTR0_IOTR_MASK 0x00000001
-#define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000
-#define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001
-
-int gpio_request(unsigned gpio, const char *label)
-{
- unsigned int value, off;
-
- writel(GPIO_PASSWD, GPIO_BASE + GPIO_GPPWR_OFFSET);
- off = GPIO_PWD_STATUS(GPIO_BANK(gpio));
- value = readl(GPIO_BASE + off) & ~GPIO_BITMASK(gpio);
- writel(value, GPIO_BASE + off);
-
- return 0;
-}
-
-int gpio_free(unsigned gpio)
-{
- unsigned int value, off;
-
- writel(GPIO_PASSWD, GPIO_BASE + GPIO_GPPWR_OFFSET);
- off = GPIO_PWD_STATUS(GPIO_BANK(gpio));
- value = readl(GPIO_BASE + off) | GPIO_BITMASK(gpio);
- writel(value, GPIO_BASE + off);
-
- return 0;
-}
-
-int gpio_direction_input(unsigned gpio)
-{
- u32 val;
-
- val = readl(GPIO_BASE + GPIO_CONTROL(gpio));
- val &= ~GPIO_GPCTR0_IOTR_MASK;
- val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
- writel(val, GPIO_BASE + GPIO_CONTROL(gpio));
-
- return 0;
-}
-
-int gpio_direction_output(unsigned gpio, int value)
-{
- int bank_id = GPIO_BANK(gpio);
- int bitmask = GPIO_BITMASK(gpio);
- u32 val, off;
-
- val = readl(GPIO_BASE + GPIO_CONTROL(gpio));
- val &= ~GPIO_GPCTR0_IOTR_MASK;
- val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT;
- writel(val, GPIO_BASE + GPIO_CONTROL(gpio));
- off = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
-
- val = readl(GPIO_BASE + off);
- val |= bitmask;
- writel(val, GPIO_BASE + off);
-
- return 0;
-}
-
-int gpio_get_value(unsigned gpio)
-{
- int bank_id = GPIO_BANK(gpio);
- int bitmask = GPIO_BITMASK(gpio);
- u32 val, off;
-
- /* determine the GPIO pin direction */
- val = readl(GPIO_BASE + GPIO_CONTROL(gpio));
- val &= GPIO_GPCTR0_IOTR_MASK;
-
- /* read the GPIO bank status */
- off = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ?
- GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
- val = readl(GPIO_BASE + off);
-
- /* return the specified bit status */
- return !!(val & bitmask);
-}
-
-void gpio_set_value(unsigned gpio, int value)
-{
- int bank_id = GPIO_BANK(gpio);
- int bitmask = GPIO_BITMASK(gpio);
- u32 val, off;
-
- /* determine the GPIO pin direction */
- val = readl(GPIO_BASE + GPIO_CONTROL(gpio));
- val &= GPIO_GPCTR0_IOTR_MASK;
-
- /* this function only applies to output pin */
- if (GPIO_GPCTR0_IOTR_CMD_INPUT == val) {
- printf("%s: Cannot set an input pin %d\n", __func__, gpio);
- return;
- }
-
- off = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
-
- val = readl(GPIO_BASE + off);
- val |= bitmask;
- writel(val, GPIO_BASE + off);
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 31/87] video: Drop unused lg4573 driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (29 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 30/87] arm: Drop old kona code Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 32/87] m68k: Drop unused CONFIG_M52277 Simon Glass
` (56 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Anatolij Gustschin
This is not used since this commit:
3cf02f5ffa4 imx6: remove not longer supported aristainetos boards
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/video/Makefile | 1 -
drivers/video/lg4573.c | 331 -----------------------------------------
2 files changed, 332 deletions(-)
delete mode 100644 drivers/video/lg4573.c
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 40a871d638e..12b68cdd068 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -30,7 +30,6 @@ obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
obj-$(CONFIG_IHS_VIDEO_OUT) += ihs_video_out.o
-obj-$(CONFIG_LG4573) += lg4573.o
obj-$(CONFIG_LOGICORE_DP_TX) += logicore_dp_tx.o
obj-$(CONFIG_NXP_TDA19988) += tda19988.o
obj-$(CONFIG_OSD) += video_osd-uclass.o
diff --git a/drivers/video/lg4573.c b/drivers/video/lg4573.c
deleted file mode 100644
index dd87fc461b9..00000000000
--- a/drivers/video/lg4573.c
+++ /dev/null
@@ -1,331 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * LCD: LG4573, TFT 4.3", 480x800, RGB24
- * LCD initialization via SPI
- *
- */
-#include <common.h>
-#include <backlight.h>
-#include <command.h>
-#include <display.h>
-#include <dm.h>
-#include <log.h>
-#include <dm/read.h>
-#include <dm/uclass-internal.h>
-#include <errno.h>
-#include <spi.h>
-#include <asm/gpio.h>
-#include <linux/delay.h>
-
-#define PWR_ON_DELAY_MSECS 120
-
-static int lb043wv_spi_write_u16(struct spi_slave *slave, u16 val)
-{
- unsigned short buf16 = htons(val);
- int ret = 0;
-
- ret = spi_xfer(slave, 16, &buf16, NULL,
- SPI_XFER_BEGIN | SPI_XFER_END);
- if (ret)
- debug("%s: Failed to send: %d\n", __func__, ret);
-
- return ret;
-}
-
-static void lb043wv_spi_write_u16_array(struct spi_slave *slave, u16 *buff,
- int size)
-{
- int i;
-
- for (i = 0; i < size; i++)
- lb043wv_spi_write_u16(slave, buff[i]);
-}
-
-static void lb043wv_display_mode_settings(struct spi_slave *slave)
-{
- static u16 display_mode_settings[] = {
- 0x703A,
- 0x7270,
- 0x70B1,
- 0x7208,
- 0x723B,
- 0x720F,
- 0x70B2,
- 0x7200,
- 0x72C8,
- 0x70B3,
- 0x7200,
- 0x70B4,
- 0x7200,
- 0x70B5,
- 0x7242,
- 0x7210,
- 0x7210,
- 0x7200,
- 0x7220,
- 0x70B6,
- 0x720B,
- 0x720F,
- 0x723C,
- 0x7213,
- 0x7213,
- 0x72E8,
- 0x70B7,
- 0x7246,
- 0x7206,
- 0x720C,
- 0x7200,
- 0x7200,
- };
-
- debug("transfer display mode settings\n");
- lb043wv_spi_write_u16_array(slave, display_mode_settings,
- ARRAY_SIZE(display_mode_settings));
-}
-
-static void lb043wv_power_settings(struct spi_slave *slave)
-{
- static u16 power_settings[] = {
- 0x70C0,
- 0x7201,
- 0x7211,
- 0x70C3,
- 0x7207,
- 0x7203,
- 0x7204,
- 0x7204,
- 0x7204,
- 0x70C4,
- 0x7212,
- 0x7224,
- 0x7218,
- 0x7218,
- 0x7202,
- 0x7249,
- 0x70C5,
- 0x726F,
- 0x70C6,
- 0x7241,
- 0x7263,
- };
-
- debug("transfer power settings\n");
- lb043wv_spi_write_u16_array(slave, power_settings,
- ARRAY_SIZE(power_settings));
-}
-
-static void lb043wv_gamma_settings(struct spi_slave *slave)
-{
- static u16 gamma_settings[] = {
- 0x70D0,
- 0x7203,
- 0x7207,
- 0x7273,
- 0x7235,
- 0x7200,
- 0x7201,
- 0x7220,
- 0x7200,
- 0x7203,
- 0x70D1,
- 0x7203,
- 0x7207,
- 0x7273,
- 0x7235,
- 0x7200,
- 0x7201,
- 0x7220,
- 0x7200,
- 0x7203,
- 0x70D2,
- 0x7203,
- 0x7207,
- 0x7273,
- 0x7235,
- 0x7200,
- 0x7201,
- 0x7220,
- 0x7200,
- 0x7203,
- 0x70D3,
- 0x7203,
- 0x7207,
- 0x7273,
- 0x7235,
- 0x7200,
- 0x7201,
- 0x7220,
- 0x7200,
- 0x7203,
- 0x70D4,
- 0x7203,
- 0x7207,
- 0x7273,
- 0x7235,
- 0x7200,
- 0x7201,
- 0x7220,
- 0x7200,
- 0x7203,
- 0x70D5,
- 0x7203,
- 0x7207,
- 0x7273,
- 0x7235,
- 0x7200,
- 0x7201,
- 0x7220,
- 0x7200,
- 0x7203,
- };
-
- debug("transfer gamma settings\n");
- lb043wv_spi_write_u16_array(slave, gamma_settings,
- ARRAY_SIZE(gamma_settings));
-}
-
-static void lb043wv_display_on(struct spi_slave *slave)
-{
- static u16 sleep_out = 0x7011;
- static u16 display_on = 0x7029;
-
- lb043wv_spi_write_u16(slave, sleep_out);
- mdelay(PWR_ON_DELAY_MSECS);
- lb043wv_spi_write_u16(slave, display_on);
-}
-
-static int lg4573_spi_startup(struct spi_slave *slave)
-{
- int ret;
-
- ret = spi_claim_bus(slave);
- if (ret)
- return ret;
-
- lb043wv_display_mode_settings(slave);
- lb043wv_power_settings(slave);
- lb043wv_gamma_settings(slave);
- lb043wv_display_on(slave);
-
- spi_release_bus(slave);
- return 0;
-}
-
-static int do_lgset(struct cmd_tbl *cmdtp, int flag, int argc,
- char *const argv[])
-{
- struct spi_slave *slave;
- struct udevice *dev;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_DISPLAY,
- DM_DRIVER_GET(lg4573_lcd), &dev);
- if (ret) {
- printf("%s: Could not get lg4573 device\n", __func__);
- return ret;
- }
- slave = dev_get_parent_priv(dev);
- if (!slave) {
- printf("%s: No slave data\n", __func__);
- return -ENODEV;
- }
- lg4573_spi_startup(slave);
-
- return 0;
-}
-
-U_BOOT_CMD(
- lgset, 2, 1, do_lgset,
- "set lgdisplay",
- ""
-);
-
-static int lg4573_bind(struct udevice *dev)
-{
- return 0;
-}
-
-static int lg4573_probe(struct udevice *dev)
-{
- return 0;
-}
-
-static const struct udevice_id lg4573_ids[] = {
- { .compatible = "lg,lg4573" },
- { }
-};
-
-struct lg4573_lcd_priv {
- struct display_timing timing;
- struct udevice *backlight;
- struct gpio_desc enable;
- int panel_bpp;
- u32 power_on_delay;
-};
-
-static int lg4573_lcd_read_timing(struct udevice *dev,
- struct display_timing *timing)
-{
- struct lg4573_lcd_priv *priv = dev_get_priv(dev);
-
- memcpy(timing, &priv->timing, sizeof(struct display_timing));
-
- return 0;
-}
-
-static int lg4573_lcd_enable(struct udevice *dev, int bpp,
- const struct display_timing *edid)
-{
- struct spi_slave *slave = dev_get_parent_priv(dev);
- struct lg4573_lcd_priv *priv = dev_get_priv(dev);
- int ret = 0;
-
- dm_gpio_set_value(&priv->enable, 1);
- ret = backlight_enable(priv->backlight);
-
- mdelay(priv->power_on_delay);
- lg4573_spi_startup(slave);
-
- return ret;
-};
-
-static const struct dm_display_ops lg4573_lcd_ops = {
- .read_timing = lg4573_lcd_read_timing,
- .enable = lg4573_lcd_enable,
-};
-
-static int lg4573_of_to_plat(struct udevice *dev)
-{
- struct lg4573_lcd_priv *priv = dev_get_priv(dev);
- int ret;
-
- ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
- "backlight", &priv->backlight);
- if (ret) {
- debug("%s: Cannot get backlight: ret=%d\n", __func__, ret);
- return log_ret(ret);
- }
- ret = gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable,
- GPIOD_IS_OUT);
- if (ret) {
- debug("%s: Warning: cannot get enable GPIO: ret=%d\n",
- __func__, ret);
- if (ret != -ENOENT)
- return log_ret(ret);
- }
-
- priv->power_on_delay = dev_read_u32_default(dev, "power-on-delay", 10);
-
- return 0;
-}
-
-U_BOOT_DRIVER(lg4573_lcd) = {
- .name = "lg4573",
- .id = UCLASS_DISPLAY,
- .ops = &lg4573_lcd_ops,
- .of_to_plat = lg4573_of_to_plat,
- .of_match = lg4573_ids,
- .bind = lg4573_bind,
- .probe = lg4573_probe,
- .priv_auto = sizeof(struct lg4573_lcd_priv),
-};
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 32/87] m68k: Drop unused CONFIG_M52277
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (30 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 31/87] video: Drop unused lg4573 driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 33/87] m68k: Rename MCF5301x Simon Glass
` (55 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Alison Wang, Angelo Dureghello
This option does not exist, so the Makefile rule does nothing. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/m68k/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 63f18109a57..4a7960bbeb4 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -7,7 +7,6 @@ libs-y += arch/m68k/lib/
cpuflags-$(CONFIG_M5208) := -mcpu=5208
cpuflags-$(CONFIG_M5235) := -mcpu=5235 -fPIC
-cpuflags-$(CONFIG_M52277) := -mcpu=52277 -fPIC
cpuflags-$(CONFIG_M5249) := -mcpu=5249
cpuflags-$(CONFIG_M5253) := -mcpu=5253
cpuflags-$(CONFIG_M5271) := -mcpu=5271
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 33/87] m68k: Rename MCF5301x
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (31 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 32/87] m68k: Drop unused CONFIG_M52277 Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 34/87] m68k: Rename MCF532x Simon Glass
` (54 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Alison Wang, Angelo Dureghello
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/m68k/Kconfig | 4 ++--
arch/m68k/Makefile | 2 +-
arch/m68k/cpu/mcf532x/cpu.c | 2 +-
arch/m68k/cpu/mcf532x/cpu_init.c | 4 ++--
arch/m68k/cpu/mcf532x/speed.c | 12 ++++++------
arch/m68k/cpu/mcf532x/start.S | 2 +-
arch/m68k/include/asm/cache.h | 2 +-
arch/m68k/include/asm/immap.h | 2 +-
arch/m68k/include/asm/immap_5301x.h | 2 +-
board/freescale/m53017evb/README | 6 +++---
10 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 76233ef563f..af5540f14a4 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -32,7 +32,7 @@ config MCF530x
select DM_SERIAL
bool
-config MCF5301x
+config MCF5301X
select OF_CONTROL
select DM
select DM_SERIAL
@@ -95,7 +95,7 @@ config M5307
config M53015
bool
- select MCF5301x
+ select MCF5301X
config M5329
bool
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 4a7960bbeb4..21e5337d309 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -14,7 +14,7 @@ cpuflags-$(CONFIG_M5272) := -mcpu=5272
cpuflags-$(CONFIG_M5275) := -mcpu=5275
cpuflags-$(CONFIG_M5282) := -mcpu=5282
cpuflags-$(CONFIG_M5307) := -mcpu=5307
-cpuflags-$(CONFIG_MCF5301x) := -mcpu=53015 -fPIC
+cpuflags-$(CONFIG_MCF5301X) := -mcpu=53015 -fPIC
cpuflags-$(CONFIG_MCF532x) := -mcpu=5329 -fPIC
cpuflags-$(CONFIG_MCF5441x) := -mcpu=54418 -fPIC
diff --git a/arch/m68k/cpu/mcf532x/cpu.c b/arch/m68k/cpu/mcf532x/cpu.c
index 548cbca36aa..96a9a422f3a 100644
--- a/arch/m68k/cpu/mcf532x/cpu.c
+++ b/arch/m68k/cpu/mcf532x/cpu.c
@@ -46,7 +46,7 @@ int print_cpuinfo(void)
msk = (in_be16(&ccm->cir) >> 6);
ver = (in_be16(&ccm->cir) & 0x003f);
switch (msk) {
-#ifdef CONFIG_MCF5301x
+#ifdef CONFIG_MCF5301X
case 0x78:
id = 53010;
break;
diff --git a/arch/m68k/cpu/mcf532x/cpu_init.c b/arch/m68k/cpu/mcf532x/cpu_init.c
index 844d2cd7600..c12cb310e62 100644
--- a/arch/m68k/cpu/mcf532x/cpu_init.c
+++ b/arch/m68k/cpu/mcf532x/cpu_init.c
@@ -21,7 +21,7 @@
#include <asm/fec.h>
#endif
-#ifdef CONFIG_MCF5301x
+#ifdef CONFIG_MCF5301X
void cpu_init_f(void)
{
scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
@@ -207,7 +207,7 @@ int fecpin_setclear(fec_info_t *info, int setclear)
return 0;
}
#endif /* CONFIG_CMD_NET */
-#endif /* CONFIG_MCF5301x */
+#endif /* CONFIG_MCF5301X */
#ifdef CONFIG_MCF532x
void cpu_init_f(void)
diff --git a/arch/m68k/cpu/mcf532x/speed.c b/arch/m68k/cpu/mcf532x/speed.c
index 32ffac08135..24b2f937aeb 100644
--- a/arch/m68k/cpu/mcf532x/speed.c
+++ b/arch/m68k/cpu/mcf532x/speed.c
@@ -23,7 +23,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define MAX_FSYS 80000 /* KHz */
#define MIN_FSYS 58333 /* KHz */
-#ifdef CONFIG_MCF5301x
+#ifdef CONFIG_MCF5301X
#define FREF 20000 /* KHz */
#define MAX_MFD 63 /* Multiplier */
#define MIN_MFD 0 /* Multiplier */
@@ -58,14 +58,14 @@ int get_sys_clock(void)
/* Test to see if device is in LIMP mode */
if (in_be16(&ccm->misccr) & CCM_MISCCR_LIMP) {
divider = in_be16(&ccm->cdr) & CCM_CDR_LPDIV(0xF);
-#ifdef CONFIG_MCF5301x
+#ifdef CONFIG_MCF5301X
return (FREF / (3 * (1 << divider)));
#endif
#ifdef CONFIG_MCF532x
return (FREF / (2 << divider));
#endif
} else {
-#ifdef CONFIG_MCF5301x
+#ifdef CONFIG_MCF5301X
u32 pfdr = (in_be32(&pll->pcr) & 0x3F) + 1;
u32 refdiv = (1 << ((in_be32(&pll->pcr) & PLL_PCR_REFDIV(7)) >> 8));
u32 busdiv = ((in_be32(&pll->pdr) & 0x00F0) >> 4) + 1;
@@ -151,7 +151,7 @@ int clock_pll(int fsys, int flags)
if (fsys == 0) {
/* Return current PLL output */
-#ifdef CONFIG_MCF5301x
+#ifdef CONFIG_MCF5301X
u32 busdiv = ((in_be32(&pll->pdr) >> 4) & 0x0F) + 1;
mfd = (in_be32(&pll->pcr) & 0x3F) + 1;
@@ -178,7 +178,7 @@ int clock_pll(int fsys, int flags)
* point libraries.
*/
temp = (100 * fsys) / fref;
-#ifdef CONFIG_MCF5301x
+#ifdef CONFIG_MCF5301X
mfd = (BUSDIV * temp) / 100;
/* Determine the output frequency for selected values */
@@ -209,7 +209,7 @@ int clock_pll(int fsys, int flags)
/* Enter LIMP mode */
clock_limp(DEFAULT_LPD);
-#ifdef CONFIG_MCF5301x
+#ifdef CONFIG_MCF5301X
out_be32(&pll->pdr,
PLL_PDR_OUTDIV1((BUSDIV / 3) - 1) |
PLL_PDR_OUTDIV2(BUSDIV - 1) |
diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S
index 72a2f99b7dd..442a91f73ac 100644
--- a/arch/m68k/cpu/mcf532x/start.S
+++ b/arch/m68k/cpu/mcf532x/start.S
@@ -112,7 +112,7 @@ _start:
movec %d0, %ACR0
movec %d0, %ACR1
-#ifdef CONFIG_MCF5301x
+#ifdef CONFIG_MCF5301X
move.l #(0xFC0a0010), %a0
move.w (%a0), %d0
and.l %d0, 0xEFFF
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index 8ed2b4dbab4..78ff04fe29b 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -15,7 +15,7 @@
#endif
#if defined(CONFIG_MCF530x) || defined(CONFIG_MCF532x) || \
- defined(CONFIG_MCF5301x)
+ defined(CONFIG_MCF5301X)
#define CFG_CF_V3
#endif
diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h
index 8207c8d5b73..ec270fcf579 100644
--- a/arch/m68k/include/asm/immap.h
+++ b/arch/m68k/include/asm/immap.h
@@ -210,7 +210,7 @@
#endif
#endif /* CONFIG_M5307 */
-#if defined(CONFIG_MCF5301x)
+#if defined(CONFIG_MCF5301X)
#include <asm/immap_5301x.h>
#include <asm/m5301x.h>
diff --git a/arch/m68k/include/asm/immap_5301x.h b/arch/m68k/include/asm/immap_5301x.h
index e1f7858b100..6bfd5c7a840 100644
--- a/arch/m68k/include/asm/immap_5301x.h
+++ b/arch/m68k/include/asm/immap_5301x.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * MCF5301x Internal Memory Map
+ * MCF5301X Internal Memory Map
*
* Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
diff --git a/board/freescale/m53017evb/README b/board/freescale/m53017evb/README
index 34f05f3fdc7..9c14f836cbf 100644
--- a/board/freescale/m53017evb/README
+++ b/board/freescale/m53017evb/README
@@ -58,12 +58,12 @@ Changed files:
- arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
- arch/m68k/lib/traps.c Exception init code
-1 MCF5301x specific Options/Settings
+1 MCF5301X specific Options/Settings
====================================
1.1 pre-loader is no longer suppoer in thie coldfire family
1.2 Configuration settings for M53017EVB Development Board
-CONFIG_MCF5301x -- define for all MCF5301x CPUs
+CONFIG_MCF5301X -- define for all MCF5301X CPUs
CONFIG_M53015 -- define for MCF53015 CPUs
CONFIG_M53017EVB -- define for M53017EVB board
@@ -100,7 +100,7 @@ CFG_SYS_MBAR -- define MBAR offset
CONFIG_MONITOR_IS_IN_RAM -- Not support
-CFG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM
+CFG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301X internal SRAM
CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 34/87] m68k: Rename MCF532x
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (32 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 33/87] m68k: Rename MCF5301x Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 35/87] m68k: Rename MCF5441x Simon Glass
` (53 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Alison Wang, Angelo Dureghello
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/m68k/Kconfig | 6 +++---
arch/m68k/Makefile | 2 +-
arch/m68k/cpu/mcf532x/cpu.c | 2 +-
arch/m68k/cpu/mcf532x/cpu_init.c | 4 ++--
arch/m68k/cpu/mcf532x/speed.c | 16 ++++++++--------
arch/m68k/include/asm/cache.h | 2 +-
arch/m68k/include/asm/coldfire/skha.h | 2 +-
board/freescale/m5373evb/README | 2 +-
env/Kconfig | 2 +-
9 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index af5540f14a4..6781ba28c7a 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -38,7 +38,7 @@ config MCF5301X
select DM_SERIAL
bool
-config MCF532x
+config MCF532X
select OF_CONTROL
select DM
select DM_SERIAL
@@ -99,11 +99,11 @@ config M53015
config M5329
bool
- select MCF532x
+ select MCF532X
config M5373
bool
- select MCF532x
+ select MCF532X
select MCF537x
config M54418
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 21e5337d309..cf4562c55f1 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -15,7 +15,7 @@ cpuflags-$(CONFIG_M5275) := -mcpu=5275
cpuflags-$(CONFIG_M5282) := -mcpu=5282
cpuflags-$(CONFIG_M5307) := -mcpu=5307
cpuflags-$(CONFIG_MCF5301X) := -mcpu=53015 -fPIC
-cpuflags-$(CONFIG_MCF532x) := -mcpu=5329 -fPIC
+cpuflags-$(CONFIG_MCF532X) := -mcpu=5329 -fPIC
cpuflags-$(CONFIG_MCF5441x) := -mcpu=54418 -fPIC
PLATFORM_CPPFLAGS += $(cpuflags-y)
diff --git a/arch/m68k/cpu/mcf532x/cpu.c b/arch/m68k/cpu/mcf532x/cpu.c
index 96a9a422f3a..108f3cae6df 100644
--- a/arch/m68k/cpu/mcf532x/cpu.c
+++ b/arch/m68k/cpu/mcf532x/cpu.c
@@ -63,7 +63,7 @@ int print_cpuinfo(void)
id = 53013;
break;
#endif
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
case 0x54:
id = 5329;
break;
diff --git a/arch/m68k/cpu/mcf532x/cpu_init.c b/arch/m68k/cpu/mcf532x/cpu_init.c
index c12cb310e62..2ddb5b35e23 100644
--- a/arch/m68k/cpu/mcf532x/cpu_init.c
+++ b/arch/m68k/cpu/mcf532x/cpu_init.c
@@ -209,7 +209,7 @@ int fecpin_setclear(fec_info_t *info, int setclear)
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_MCF5301X */
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
void cpu_init_f(void)
{
scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
@@ -355,4 +355,4 @@ int fecpin_setclear(fec_info_t *info, int setclear)
return 0;
}
#endif
-#endif /* CONFIG_MCF532x */
+#endif /* CONFIG_MCF532X */
diff --git a/arch/m68k/cpu/mcf532x/speed.c b/arch/m68k/cpu/mcf532x/speed.c
index 24b2f937aeb..a326535561d 100644
--- a/arch/m68k/cpu/mcf532x/speed.c
+++ b/arch/m68k/cpu/mcf532x/speed.c
@@ -35,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define DEFAULT_LPD (0) /* Divider (not encoded) */
#endif
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
#define FREF 16000 /* KHz */
#define MAX_MFD 135 /* Multiplier */
#define MIN_MFD 88 /* Multiplier */
@@ -61,7 +61,7 @@ int get_sys_clock(void)
#ifdef CONFIG_MCF5301X
return (FREF / (3 * (1 << divider)));
#endif
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
return (FREF / (2 << divider));
#endif
} else {
@@ -72,7 +72,7 @@ int get_sys_clock(void)
return (((FREF * pfdr) / refdiv) / busdiv);
#endif
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
return (FREF * in_8(&pll->pfdr)) / (BUSDIV * 4);
#endif
}
@@ -139,7 +139,7 @@ int clock_exit_limp(void)
*/
int clock_pll(int fsys, int flags)
{
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
u32 *sdram_workaround = (u32 *)(MMAP_SDRAM + 0x80);
#endif
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
@@ -157,7 +157,7 @@ int clock_pll(int fsys, int flags)
return (fref * mfd) / busdiv;
#endif
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
mfd = in_8(&pll->pfdr);
return (fref * mfd / (BUSDIV * 4));
@@ -184,7 +184,7 @@ int clock_pll(int fsys, int flags)
/* Determine the output frequency for selected values */
fout = ((fref * mfd) / BUSDIV);
#endif
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
mfd = (4 * BUSDIV * temp) / 100;
/* Determine the output frequency for selected values */
@@ -219,7 +219,7 @@ int clock_pll(int fsys, int flags)
clrbits_be32(&pll->pcr, ~PLL_PCR_FBDIV_UNMASK);
setbits_be32(&pll->pcr, PLL_PCR_FBDIV(mfd - 1));
#endif
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
/* Reprogram PLL for desired fsys */
out_8(&pll->podr,
PLL_PODR_CPUDIV(BUSDIV / 3) | PLL_PODR_BUSDIV(BUSDIV));
@@ -234,7 +234,7 @@ int clock_pll(int fsys, int flags)
if (in_be32(&sdram->ctrl) & SDRAMC_SDCR_REF)
setbits_be32(&sdram->ctrl, SDRAMC_SDCR_CKE);
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
/*
* software workaround for SDRAM opeartion after exiting LIMP
* mode errata
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index 78ff04fe29b..4acd677c676 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -14,7 +14,7 @@
#define CFG_CF_V2
#endif
-#if defined(CONFIG_MCF530x) || defined(CONFIG_MCF532x) || \
+#if defined(CONFIG_MCF530x) || defined(CONFIG_MCF532X) || \
defined(CONFIG_MCF5301X)
#define CFG_CF_V3
#endif
diff --git a/arch/m68k/include/asm/coldfire/skha.h b/arch/m68k/include/asm/coldfire/skha.h
index 3b48dc970c9..e0585a5b409 100644
--- a/arch/m68k/include/asm/coldfire/skha.h
+++ b/arch/m68k/include/asm/coldfire/skha.h
@@ -42,7 +42,7 @@ typedef struct skha_ctrl {
u32 c12; /* 0x9C Context 12 - 5235, 5271, 5272 */
} skha_t;
-#ifdef CONFIG_MCF532x
+#ifdef CONFIG_MCF532X
#define SKHA_MODE_CTRM(x) (((x) & 0x0F) << 9)
#define SKHA_MODE_CTRM_MASK (0xFFFFE1FF)
#define SKHA_MODE_DKP (0x00000100)
diff --git a/board/freescale/m5373evb/README b/board/freescale/m5373evb/README
index 7240648796b..80e8e2ddde7 100644
--- a/board/freescale/m5373evb/README
+++ b/board/freescale/m5373evb/README
@@ -62,7 +62,7 @@ Changed files:
1.1 pre-loader is no longer suppoer in thie coldfire family
1.2 Configuration settings for M5373EVB Development Board
-CONFIG_MCF532x -- define for all MCF532x CPUs
+CONFIG_MCF532X -- define for all MCF532X CPUs
CONFIG_M5373 -- define for all Freescale MCF5373 CPUs
CONFIG_M5373EVB -- define for M5373EVB board
diff --git a/env/Kconfig b/env/Kconfig
index c409ea71fe5..688f34841fa 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -115,7 +115,7 @@ config ENV_IS_IN_FLASH
default y if ARCH_CINTEGRATOR
default y if ARCH_INTEGRATOR_CP
default y if M548x || M547x || M5282
- default y if MCF532x || MCF52x2
+ default y if MCF532X || MCF52x2
default y if MPC86xx || MPC83xx
default y if ARCH_MPC8548
default y if SH && !CPU_SH4
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 35/87] m68k: Rename MCF5441x
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (33 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 34/87] m68k: Rename MCF532x Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 36/87] m68k: Drop unused CONFIG_MACH_DAVINCI_DA830_EVM Simon Glass
` (52 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Alison Wang, Angelo Dureghello
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/m68k/Kconfig | 4 ++--
arch/m68k/Makefile | 4 ++--
arch/m68k/cpu/mcf5445x/cpu_init.c | 12 ++++++------
arch/m68k/cpu/mcf5445x/dspi.c | 4 ++--
arch/m68k/cpu/mcf5445x/speed.c | 4 ++--
arch/m68k/cpu/mcf5445x/start.S | 8 ++++----
arch/m68k/include/asm/cache.h | 4 ++--
arch/m68k/include/asm/global_data.h | 2 +-
arch/m68k/include/asm/immap_5441x.h | 2 +-
drivers/mmc/fsl_esdhc_imx.c | 12 ++++++------
10 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 6781ba28c7a..4e2a9075b10 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -50,7 +50,7 @@ config MCF537x
select DM_SERIAL
bool
-config MCF5441x
+config MCF5441X
select OF_CONTROL
select DM
select DM_SERIAL
@@ -108,7 +108,7 @@ config M5373
config M54418
bool
- select MCF5441x
+ select MCF5441X
# peripherals
config CF_DSPI
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index cf4562c55f1..b44726242d2 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -16,12 +16,12 @@ cpuflags-$(CONFIG_M5282) := -mcpu=5282
cpuflags-$(CONFIG_M5307) := -mcpu=5307
cpuflags-$(CONFIG_MCF5301X) := -mcpu=53015 -fPIC
cpuflags-$(CONFIG_MCF532X) := -mcpu=5329 -fPIC
-cpuflags-$(CONFIG_MCF5441x) := -mcpu=54418 -fPIC
+cpuflags-$(CONFIG_MCF5441X) := -mcpu=54418 -fPIC
PLATFORM_CPPFLAGS += $(cpuflags-y)
-ldflags-$(CONFIG_MCF5441x) := --got=single
+ldflags-$(CONFIG_MCF5441X) := --got=single
ifneq (,$(findstring -linux-,$(shell $(CC) --version)))
ifneq (,$(findstring GOT,$(shell $(LD) --help)))
diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c
index 1ce244872f1..a70ecfbae73 100644
--- a/arch/m68k/cpu/mcf5445x/cpu_init.c
+++ b/arch/m68k/cpu/mcf5445x/cpu_init.c
@@ -73,7 +73,7 @@ void cfspi_port_conf(void)
{
gpio_t *gpio = (gpio_t *)MMAP_GPIO;
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
pm_t *pm = (pm_t *)MMAP_PM;
out_8(&gpio->par_dspi0,
@@ -98,7 +98,7 @@ void cpu_init_f(void)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
scm_t *scm = (scm_t *) MMAP_SCM;
pm_t *pm = (pm_t *) MMAP_PM;
@@ -203,7 +203,7 @@ void cpu_init_f(void)
out_8(&gpio->par_sdhch, 0xff);
out_8(&gpio->par_sdhcl, 0xff);
#endif
-#endif /* CONFIG_MCF5441x */
+#endif /* CONFIG_MCF5441X */
/* FlexBus Chipselect */
init_fbcs();
@@ -240,13 +240,13 @@ int cpu_init_r(void)
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
pm_t *pm = (pm_t *) MMAP_PM;
#endif
/* Setup Ports: */
switch (port) {
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
case 0:
/* UART0 */
out_8(&pm->pmcr0, 24);
@@ -340,7 +340,7 @@ int fecpin_setclear(fec_info_t *info, int setclear)
if (fec_get_base_addr(0, &fec0_base))
return -1;
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
if (setclear) {
out_8(&gpio->par_fec, 0x03);
out_8(&gpio->srcr_fec, 0x0F);
diff --git a/arch/m68k/cpu/mcf5445x/dspi.c b/arch/m68k/cpu/mcf5445x/dspi.c
index 456af171a4e..628be0c8bbb 100644
--- a/arch/m68k/cpu/mcf5445x/dspi.c
+++ b/arch/m68k/cpu/mcf5445x/dspi.c
@@ -15,7 +15,7 @@ void dspi_chip_select(int cs)
{
struct gpio *gpio = (struct gpio *)MMAP_GPIO;
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
switch (cs) {
case 0:
clrbits_8(&gpio->par_dspi0,
@@ -37,7 +37,7 @@ void dspi_chip_unselect(int cs)
{
struct gpio *gpio = (struct gpio *)MMAP_GPIO;
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
if (cs == 1)
clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
#endif
diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c
index eb73da68c6b..59a6625a4fd 100644
--- a/arch/m68k/cpu/mcf5445x/speed.c
+++ b/arch/m68k/cpu/mcf5445x/speed.c
@@ -63,7 +63,7 @@ void clock_exit_limp(void)
;
}
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
void setup_5441x_clocks(void)
{
ccm_t *ccm = (ccm_t *)MMAP_CCM;
@@ -125,7 +125,7 @@ void setup_5441x_clocks(void)
/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
int get_clocks(void)
{
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
setup_5441x_clocks();
#endif
diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S
index a083c3d45d2..baf39127b29 100644
--- a/arch/m68k/cpu/mcf5445x/start.S
+++ b/arch/m68k/cpu/mcf5445x/start.S
@@ -167,7 +167,7 @@ asm_dram_init:
#endif
#endif /* CONFIG_CF_SBF */
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
/* TC: enable all peripherals,
in the future only enable certain peripherals */
move.l #0xFC04002D, %a1
@@ -175,7 +175,7 @@ asm_dram_init:
#if defined(CONFIG_CF_SBF)
move.b #23, (%a1) /* dspi */
#endif
-#endif /* CONFIG_MCF5441x */
+#endif /* CONFIG_MCF5441X */
/* mandatory board level ddr-sdram init,
* for both 5441x and 5445x
@@ -193,7 +193,7 @@ asm_dram_init:
*/
/* Enable pins for DSPI mode - chip-selects are enabled later */
asm_dspi_init:
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
move.l #0xEC09404E, %a1
move.l #0xEC09404F, %a2
move.b #0xFF, (%a1)
@@ -205,7 +205,7 @@ asm_dspi_init:
move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */
move.l #0xFC05C00C, %a0
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
move.l #0x3E000016, (%a0)
#endif
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index 4acd677c676..52d12a68144 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -19,7 +19,7 @@
#define CFG_CF_V3
#endif
-#if defined(CONFIG_MCF5441x)
+#if defined(CONFIG_MCF5441X)
#define CFG_CF_V4E /* Four Extra ACRn */
#endif
@@ -94,7 +94,7 @@
#define CF_CACR_IDSP (1 << 7)
#define CF_CACR_EUSP (1 << 5)
-#if defined(CONFIG_MCF5445x) || defined(CONFIG_MCF5441x)
+#if defined(CONFIG_MCF5445x) || defined(CONFIG_MCF5441X)
#define CF_CACR_IVO (1 << 20)
#define CF_CACR_SPA (1 << 14)
#else
diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h
index 273e843c4ae..d63fb8130c4 100644
--- a/arch/m68k/include/asm/global_data.h
+++ b/arch/m68k/include/asm/global_data.h
@@ -20,7 +20,7 @@ struct arch_global_data {
unsigned long vco_clk;
unsigned long flb_clk;
#endif
-#ifdef CONFIG_MCF5441x
+#ifdef CONFIG_MCF5441X
unsigned long sdhc_clk;
#endif
};
diff --git a/arch/m68k/include/asm/immap_5441x.h b/arch/m68k/include/asm/immap_5441x.h
index 708d0db755a..1beb14ad53b 100644
--- a/arch/m68k/include/asm/immap_5441x.h
+++ b/arch/m68k/include/asm/immap_5441x.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * MCF5441x Internal Memory Map
+ * MCF5441X Internal Memory Map
*
* Copyright 2010-2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 66caf683f74..da888885474 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -383,7 +383,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
return 0;
}
-#if IS_ENABLED(CONFIG_MCF5441x)
+#if IS_ENABLED(CONFIG_MCF5441X)
/*
* Swaps 32-bit words to little-endian byte order.
*/
@@ -553,7 +553,7 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
dma_unmap_single(priv->dma_addr,
data->blocks * data->blocksize,
mmc_get_dma_dir(data));
- if (IS_ENABLED(CONFIG_MCF5441x) &&
+ if (IS_ENABLED(CONFIG_MCF5441X) &&
(data->flags & MMC_DATA_READ))
sd_swap_dma_buff(data);
}
@@ -1026,7 +1026,7 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
esdhc_clrbits32(®s->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
/* Put the PROCTL reg back to the default */
- if (IS_ENABLED(CONFIG_MCF5441x))
+ if (IS_ENABLED(CONFIG_MCF5441X))
esdhc_write32(®s->proctl, PROCTL_INIT | PROCTL_D3CD);
else
esdhc_write32(®s->proctl, PROCTL_INIT);
@@ -1168,7 +1168,7 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
return ret;
/* ColdFire, using SDHC_DATA[3] for card detection */
- if (IS_ENABLED(CONFIG_MCF5441x))
+ if (IS_ENABLED(CONFIG_MCF5441X))
esdhc_write32(®s->proctl, PROCTL_INIT | PROCTL_D3CD);
if (IS_ENABLED(CONFIG_FSL_USDHC)) {
@@ -1194,11 +1194,11 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
caps = esdhc_read32(®s->hostcapblt);
/*
- * MCF5441x RM declares in more points that sdhc clock speed must
+ * MCF5441X RM declares in more points that sdhc clock speed must
* never exceed 25 Mhz. From this, the HS bit needs to be disabled
* from host capabilities.
*/
- if (IS_ENABLED(CONFIG_MCF5441x))
+ if (IS_ENABLED(CONFIG_MCF5441X))
caps &= ~HOSTCAPBLT_HSS;
if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC135))
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 36/87] m68k: Drop unused CONFIG_MACH_DAVINCI_DA830_EVM
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (34 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 35/87] m68k: Rename MCF5441x Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 37/87] arm: Drop CONFIG_MMU Simon Glass
` (51 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Alison Wang, Angelo Dureghello
This option does not exist, so the Makefile rule does nothing. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/davinci/da8xxevm/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/board/davinci/da8xxevm/Makefile b/board/davinci/da8xxevm/Makefile
index 8187c8db22e..fe043d517f2 100644
--- a/board/davinci/da8xxevm/Makefile
+++ b/board/davinci/da8xxevm/Makefile
@@ -5,6 +5,5 @@
#
# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o
obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += da850evm.o
obj-$(CONFIG_TARGET_OMAPL138_LCDK) += omapl138_lcdk.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 37/87] arm: Drop CONFIG_MMU
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (35 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 36/87] m68k: Drop unused CONFIG_MACH_DAVINCI_DA830_EVM Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 38/87] arc: " Simon Glass
` (50 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Albert Aribaud
This option does not exist, so the #ifdefs do nothing. Drop this code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/lib/debug.S | 21 ---------------------
1 file changed, 21 deletions(-)
diff --git a/arch/arm/lib/debug.S b/arch/arm/lib/debug.S
index 5983f2c04ce..af4beb4d9d2 100644
--- a/arch/arm/lib/debug.S
+++ b/arch/arm/lib/debug.S
@@ -21,22 +21,10 @@
#include CONFIG_DEBUG_LL_INCLUDE
#endif
-#ifdef CONFIG_MMU
- .macro addruart_current, rx, tmp1, tmp2
- addruart \tmp1, \tmp2, \rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- moveq \rx, \tmp1
- movne \rx, \tmp2
- .endm
-
-#else /* !CONFIG_MMU */
.macro addruart_current, rx, tmp1, tmp2
addruart \rx, \tmp1, \tmp2
.endm
-#endif /* CONFIG_MMU */
-
/*
* Useful debugging routines
*/
@@ -97,15 +85,6 @@ ENTRY(printch)
b 1b
ENDPROC(printch)
-#ifdef CONFIG_MMU
-ENTRY(debug_ll_addr)
- addruart r2, r3, ip
- str r2, [r0]
- str r3, [r1]
- mov pc, lr
-ENDPROC(debug_ll_addr)
-#endif
-
#else
ENTRY(printascii)
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 38/87] arc: Drop CONFIG_MMU
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (36 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 37/87] arm: Drop CONFIG_MMU Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 39/87] ppc: Rename MPC83xx Simon Glass
` (49 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Alexey Brodkin
This option is set in the Makefile but has no effect in the assembly
code, i.e. the #ifdef branch is never used. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arc/config.mk | 4 ----
arch/arc/lib/ints_low.S | 5 -----
2 files changed, 9 deletions(-)
diff --git a/arch/arc/config.mk b/arch/arc/config.mk
index b713fa3054c..b110f7deaf6 100644
--- a/arch/arc/config.mk
+++ b/arch/arc/config.mk
@@ -12,10 +12,6 @@ KBUILD_LDFLAGS += -EB
PLATFORM_CPPFLAGS += -mbig-endian
endif
-ifdef CONFIG_ARC_MMU_VER
-CONFIG_MMU = 1
-endif
-
PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -gdwarf-2 -mno-sdata
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections -fno-common
diff --git a/arch/arc/lib/ints_low.S b/arch/arc/lib/ints_low.S
index 38c45c60a95..fb283f239ea 100644
--- a/arch/arc/lib/ints_low.S
+++ b/arch/arc/lib/ints_low.S
@@ -76,13 +76,8 @@
.endm
.macro SAVE_EXCEPTION_SOURCE
-#ifdef CONFIG_MMU
- /* If MMU exists exception faulting address is loaded in EFA reg */
- lr %r0, [%efa]
-#else
/* Otherwise in ERET (exception return) reg */
lr %r0, [%eret]
-#endif
.endm
ENTRY(memory_error)
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 39/87] ppc: Rename MPC83xx
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (37 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 38/87] arc: " Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 40/87] gpio: Drop unused mpc83xx_gpio driver Simon Glass
` (48 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Tom Rini, Simon Glass, Heiko Schocher, Andy Fleming, Mario Six,
Priyanka Jain, Stefan Roese, Wolfgang Denk
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
---
(no changes since v1)
api/api_platform-powerpc.c | 2 +-
arch/Kconfig | 2 +-
arch/powerpc/Kconfig | 8 ++++----
arch/powerpc/cpu/Makefile | 2 +-
arch/powerpc/cpu/mpc83xx/Kconfig | 4 ++--
arch/powerpc/cpu/mpc83xx/cpu.c | 2 +-
arch/powerpc/cpu/mpc83xx/start.S | 2 +-
arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 2 +-
arch/powerpc/include/asm/fsl_dma.h | 4 ++--
arch/powerpc/include/asm/fsl_lbc.h | 2 +-
arch/powerpc/include/asm/global_data.h | 6 +++---
arch/powerpc/include/asm/immap_83xx.h | 14 +++++++-------
arch/powerpc/include/asm/ppc.h | 6 +++---
arch/powerpc/include/asm/processor.h | 4 ++--
arch/powerpc/lib/bdinfo.c | 2 +-
board/freescale/mpc837xerdb/README | 2 +-
board/keymile/Kconfig | 4 ++--
board/keymile/km83xx/Kconfig | 2 +-
configs/MPC837XERDB_defconfig | 2 +-
configs/gazerbeam_defconfig | 2 +-
configs/kmcoge5ne_defconfig | 2 +-
configs/kmeter1_defconfig | 2 +-
configs/kmopti2_defconfig | 2 +-
configs/kmsupx5_defconfig | 2 +-
configs/kmtepr2_defconfig | 2 +-
configs/tuge1_defconfig | 2 +-
configs/tuxx1_defconfig | 2 +-
drivers/clk/Kconfig | 4 ++--
drivers/clk/mpc83xx_clk.c | 4 ++--
drivers/clk/mpc83xx_clk.h | 20 ++++++++++----------
drivers/cpu/Kconfig | 6 +++---
drivers/cpu/mpc83xx_cpu.c | 14 +++++++-------
drivers/cpu/mpc83xx_cpu.h | 8 ++++----
drivers/ddr/fsl/Kconfig | 4 ++--
drivers/ddr/fsl/main.c | 2 +-
drivers/dma/fsl_dma.c | 16 ++++++++--------
drivers/gpio/mpc83xx_gpio.c | 2 +-
drivers/misc/Kconfig | 4 ++--
drivers/misc/mpc83xx_serdes.c | 4 ++--
drivers/mtd/nand/raw/fsl_elbc_spl.c | 2 +-
drivers/ram/Kconfig | 2 +-
drivers/ram/mpc83xx_sdram.c | 2 +-
drivers/spi/mpc8xxx_spi.c | 2 +-
drivers/sysreset/Kconfig | 4 ++--
drivers/timer/Kconfig | 4 ++--
drivers/timer/mpc83xx_timer.c | 2 +-
env/Kconfig | 2 +-
include/asm-generic/u-boot.h | 2 +-
include/configs/MPC837XERDB.h | 2 +-
include/linux/immap_qe.h | 2 +-
include/serial.h | 2 +-
post/Makefile | 2 +-
52 files changed, 103 insertions(+), 103 deletions(-)
diff --git a/api/api_platform-powerpc.c b/api/api_platform-powerpc.c
index 847a4a3015b..8503ba274d6 100644
--- a/api/api_platform-powerpc.c
+++ b/api/api_platform-powerpc.c
@@ -31,7 +31,7 @@ int platform_sys_info(struct sys_info *si)
#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
#define bi_bar bi_immr_base
-#elif defined(CONFIG_MPC83xx)
+#elif defined(CONFIG_MPC83XX)
#define bi_bar bi_immrbar
#endif
diff --git a/arch/Kconfig b/arch/Kconfig
index d30676ae817..79044531fab 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -370,7 +370,7 @@ config SYS_IMMR
depends on PPC || FSL_LSCH2 || FSL_LSCH3 || ARCH_LS1021A
default 0xFF000000 if MPC8xx
default 0xF0000000 if ARCH_MPC8313
- default 0xE0000000 if MPC83xx && !ARCH_MPC8313
+ default 0xE0000000 if MPC83XX && !ARCH_MPC8313
default 0x01000000 if ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
default 0xFFE00000 if ARCH_P1010 || ARCH_P1011 || ARCH_P1020 || \
ARCH_P1021 || ARCH_P1024 || ARCH_P1025 || \
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e0801c25941..eb39a03e997 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -8,8 +8,8 @@ choice
prompt "CPU select"
optional
-config MPC83xx
- bool "MPC83xx"
+config MPC83XX
+ bool "MPC83XX"
select CREATE_ARCH_SYMLINK
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
@@ -36,7 +36,7 @@ endchoice
config FSL_LBC
def_bool y
- depends on (MPC85xx || MPC83xx) && !FSL_IFC
+ depends on (MPC85xx || MPC83XX) && !FSL_IFC
config HIGH_BATS
bool "Enable high BAT registers"
@@ -46,7 +46,7 @@ config HIGH_BATS
config SYS_INIT_RAM_LOCK
bool "Lock some portion of L1 for initial ram stack"
- depends on MPC83xx || MPC85xx
+ depends on MPC83XX || MPC85xx
config SYS_SRIO
bool "Serial RapidIO support"
diff --git a/arch/powerpc/cpu/Makefile b/arch/powerpc/cpu/Makefile
index e7f64059277..c56f0d78b2d 100644
--- a/arch/powerpc/cpu/Makefile
+++ b/arch/powerpc/cpu/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_MPC83xx) += mpc8xxx/
+obj-$(CONFIG_MPC83XX) += mpc8xxx/
obj-$(CONFIG_MPC85xx) += mpc8xxx/
obj-$(CONFIG_MPC86xx) += mpc8xxx/
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index b695c7e4d81..1969117a25b 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -1,5 +1,5 @@
menu "mpc83xx CPU"
- depends on MPC83xx
+ depends on MPC83XX
config DEFAULT_IMMR
hex
@@ -90,7 +90,7 @@ endchoice
config MPC83XX_QUICC_ENGINE
bool
-# TODO: Imply MPC83xx PCI driver
+# TODO: Imply MPC83XX PCI driver
config MPC83XX_PCI_SUPPORT
bool
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index a6c063556e8..5e58023bfa8 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -4,7 +4,7 @@
*/
/*
- * CPU specific code for the MPC83xx family.
+ * CPU specific code for the MPC83XX family.
*
* Derived from the MPC8260 and MPC85xx.
*/
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index e3878e431fb..032871313d1 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -7,7 +7,7 @@
*/
/*
- * U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
+ * U-Boot - Startup Code for MPC83XX PowerPC based Embedded Boards
*/
#include <asm-offsets.h>
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
index 29489b46e6c..7519b214969 100644
--- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
@@ -8,7 +8,7 @@
#include <init.h>
#include <asm/fsl_lbc.h>
-#ifdef CONFIG_MPC83xx
+#ifdef CONFIG_MPC83XX
#include "../mpc83xx/elbc/elbc.h"
#endif
diff --git a/arch/powerpc/include/asm/fsl_dma.h b/arch/powerpc/include/asm/fsl_dma.h
index 1459db74bee..fbf61ecae20 100644
--- a/arch/powerpc/include/asm/fsl_dma.h
+++ b/arch/powerpc/include/asm/fsl_dma.h
@@ -10,7 +10,7 @@
#include <asm/types.h>
-#ifdef CONFIG_MPC83xx
+#ifdef CONFIG_MPC83XX
typedef struct fsl_dma {
uint mr; /* DMA mode register */
#define FSL_DMA_MR_CS 0x00000001 /* Channel start */
@@ -111,7 +111,7 @@ typedef struct fsl_dma {
uint dsr; /* DMA destination stride register */
char res4[56];
} fsl_dma_t;
-#endif /* !CONFIG_MPC83xx */
+#endif /* !CONFIG_MPC83XX */
#ifdef CONFIG_FSL_DMA
void dma_init(void);
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index a03f091c305..8d681a1cba6 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -324,7 +324,7 @@ void lbc_sdram_init(void);
*/
#define LCRR_CLKDIV 0x0000001F
#define LCRR_CLKDIV_SHIFT 0
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_ARCH_MPC8540) || \
+#if defined(CONFIG_MPC83XX) || defined(CONFIG_ARCH_MPC8540) || \
defined(CONFIG_ARCH_MPC8560)
#define LCRR_CLKDIV_2 0x00000002
#define LCRR_CLKDIV_4 0x00000004
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 6ed21c781fe..2636cbbda88 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -21,7 +21,7 @@ struct arch_global_data {
unsigned long brg_clk;
#endif
/* TODO: sjg@chromium.org: Should these be unslgned long? */
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
#ifdef CONFIG_CLK_MPC83XX
u32 core_clk;
#else
@@ -57,7 +57,7 @@ struct arch_global_data {
u32 lbc_clk;
void *cpu;
#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
+#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx)
u32 i2c1_clk;
u32 i2c2_clk;
@@ -75,7 +75,7 @@ struct arch_global_data {
u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
#endif
unsigned long reset_status; /* reset status register at boot */
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
unsigned long arbiter_event_attributes;
unsigned long arbiter_event_address;
#endif
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 24bd438c143..3ba73113f0b 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -2,7 +2,7 @@
/*
* Copyright 2004-2011 Freescale Semiconductor, Inc.
*
- * MPC83xx Internal Memory Map
+ * MPC83XX Internal Memory Map
*
* Contributors:
* Dave Liu <daveliu@freescale.com>
@@ -864,12 +864,12 @@ struct ccsr_gpio {
#define CFG_SYS_MPC8xxx_DDR_OFFSET (0x2000)
#define CFG_SYS_FSL_DDR_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_MPC8xxx_DDR_OFFSET)
-#define CFG_SYS_MPC83xx_DMA_OFFSET (0x8000)
-#define CFG_SYS_MPC83xx_DMA_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC83xx_DMA_OFFSET)
-#define CFG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000)
-#define CFG_SYS_MPC83xx_ESDHC_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC83xx_ESDHC_OFFSET)
+#define CFG_SYS_MPC83XX_DMA_OFFSET (0x8000)
+#define CFG_SYS_MPC83XX_DMA_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC83XX_DMA_OFFSET)
+#define CFG_SYS_MPC83XX_ESDHC_OFFSET (0x2e000)
+#define CFG_SYS_MPC83XX_ESDHC_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC83XX_ESDHC_OFFSET)
#define CFG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
diff --git a/arch/powerpc/include/asm/ppc.h b/arch/powerpc/include/asm/ppc.h
index 2923350bd7b..3b13f7ff166 100644
--- a/arch/powerpc/include/asm/ppc.h
+++ b/arch/powerpc/include/asm/ppc.h
@@ -19,7 +19,7 @@
#include <mpc85xx.h>
#include <asm/immap_85xx.h>
#endif
-#ifdef CONFIG_MPC83xx
+#ifdef CONFIG_MPC83XX
#include <mpc83xx.h>
#include <asm/immap_83xx.h>
#endif
@@ -52,7 +52,7 @@ static inline uint get_svr(void)
#if defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx) || \
- defined(CONFIG_MPC83xx)
+ defined(CONFIG_MPC83XX)
unsigned char in8(unsigned int);
void out8(unsigned int, unsigned char);
unsigned short in16(unsigned int);
@@ -68,7 +68,7 @@ void ppcDcbi(unsigned long value);
void ppcSync(void);
void ppcDcbz(unsigned long value);
#endif
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
void ppcDWload(unsigned int *addr, unsigned int *ret);
void ppcDWstore(unsigned int *addr, unsigned int *value);
void disable_addr_trans(void);
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index f7e1a807746..d80b7d75563 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1004,7 +1004,7 @@
#if defined(CONFIG_MPC85xx)
#define IS_E_PROCESSOR(svr) (svr & 0x80000)
#else
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000))
#endif
#endif
@@ -1163,7 +1163,7 @@ int fsl_qoriq_dsp_core_to_cluster(unsigned int core);
#define CPU_TYPE_ENTRY_MASK(n, v, nc, m) \
{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), .mask = (m) }
#else
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
#define CPU_TYPE_ENTRY(x) {#x, SPR_##x}
#endif
#endif
diff --git a/arch/powerpc/lib/bdinfo.c b/arch/powerpc/lib/bdinfo.c
index 55dcad5df8e..81cbcf988ff 100644
--- a/arch/powerpc/lib/bdinfo.c
+++ b/arch/powerpc/lib/bdinfo.c
@@ -20,7 +20,7 @@ int arch_setup_bdinfo(void)
bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
#endif
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
bd->bi_immrbar = CONFIG_SYS_IMMR;
#endif
diff --git a/board/freescale/mpc837xerdb/README b/board/freescale/mpc837xerdb/README
index 12df2f2e756..79accdbe7a9 100644
--- a/board/freescale/mpc837xerdb/README
+++ b/board/freescale/mpc837xerdb/README
@@ -52,7 +52,7 @@ Freescale MPC837xE-RDB Board
include/configs/MPC837XERDB.h
- CONFIG_MPC83xx MPC83xx family for both MPC8349 and MPC8360
+ CONFIG_MPC83XX MPC83XX family for both MPC8349 and MPC8360
CONFIG_MPC837x MPC837x specific
CONFIG_MPC837XERDB MPC837xE-RDB board specific
diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig
index bf899d005c4..a24d17cf8bf 100644
--- a/board/keymile/Kconfig
+++ b/board/keymile/Kconfig
@@ -34,7 +34,7 @@ config KM_PHRAM
config KM_RESERVED_PRAM
hex "Reserved RAM"
- default 0x0 if MPC83xx
+ default 0x0 if MPC83XX
default 0x1000 if MPC85xx || ARCH_LS1021A
depends on !ARCH_SOCFPGA
help
@@ -78,7 +78,7 @@ config SYS_CLIPS_BASE
config KM_COMMON_ETH_INIT
bool "Common Ethernet Initialization"
- default y if MPC83xx
+ default y if MPC83XX
default n if MPC85xx || ARCH_SOCFPGA || ARCH_LS1021A
help
Use the Ethernet initialization implemented in common code that
diff --git a/board/keymile/km83xx/Kconfig b/board/keymile/km83xx/Kconfig
index f87a2e64163..149a2395777 100644
--- a/board/keymile/km83xx/Kconfig
+++ b/board/keymile/km83xx/Kconfig
@@ -1,5 +1,5 @@
menu "KM 83xx Options"
- depends on MPC83xx
+ depends on MPC83XX
config KM_ENABLE_FULL_DM_DTS_SUPPORT
bool "enable full DM/DTS support for KM 83xx boards"
diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig
index 7287ca6b247..87c89205d12 100644
--- a/configs/MPC837XERDB_defconfig
+++ b/configs/MPC837XERDB_defconfig
@@ -7,7 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="mpc8379erdb"
CONFIG_SYS_CLK_FREQ=66666667
CONFIG_ENV_ADDR=0xFE080000
# CONFIG_SYS_PCI_64BIT is not set
-CONFIG_MPC83xx=y
+CONFIG_MPC83XX=y
CONFIG_HIGH_BATS=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_MPC837XERDB=y
diff --git a/configs/gazerbeam_defconfig b/configs/gazerbeam_defconfig
index 9d09d9c37f2..2969a633bf8 100644
--- a/configs/gazerbeam_defconfig
+++ b/configs/gazerbeam_defconfig
@@ -9,7 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="gazerbeam"
CONFIG_IDENT_STRING=" gazerbeam 0.01"
CONFIG_SYS_CLK_FREQ=33333333
CONFIG_ENV_ADDR=0xFE080000
-CONFIG_MPC83xx=y
+CONFIG_MPC83XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_GAZERBEAM=y
CONFIG_SYSTEM_PLL_VCO_DIV_2=y
diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig
index c8897003c10..16b3a87849a 100644
--- a/configs/kmcoge5ne_defconfig
+++ b/configs/kmcoge5ne_defconfig
@@ -7,7 +7,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ENV_ADDR=0xF00C0000
-CONFIG_MPC83xx=y
+CONFIG_MPC83XX=y
CONFIG_HIGH_BATS=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_KMCOGE5NE=y
diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig
index 573dc4c5c4e..a622f61e41f 100644
--- a/configs/kmeter1_defconfig
+++ b/configs/kmeter1_defconfig
@@ -8,7 +8,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ENV_ADDR=0xF00C0000
-CONFIG_MPC83xx=y
+CONFIG_MPC83XX=y
CONFIG_HIGH_BATS=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_KMETER1=y
diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig
index 895ac4649a2..d25161386dd 100644
--- a/configs/kmopti2_defconfig
+++ b/configs/kmopti2_defconfig
@@ -7,7 +7,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ENV_ADDR=0xF00C0000
-CONFIG_MPC83xx=y
+CONFIG_MPC83XX=y
CONFIG_HIGH_BATS=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_KMOPTI2=y
diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig
index e99c55e47a1..b9f334621ca 100644
--- a/configs/kmsupx5_defconfig
+++ b/configs/kmsupx5_defconfig
@@ -7,7 +7,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ENV_ADDR=0xF00C0000
-CONFIG_MPC83xx=y
+CONFIG_MPC83XX=y
CONFIG_HIGH_BATS=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_KMSUPX5=y
diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig
index fd206f3d0e6..3068da218f8 100644
--- a/configs/kmtepr2_defconfig
+++ b/configs/kmtepr2_defconfig
@@ -7,7 +7,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ENV_ADDR=0xF00C0000
-CONFIG_MPC83xx=y
+CONFIG_MPC83XX=y
CONFIG_HIGH_BATS=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_KMTEPR2=y
diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig
index 3301a7f936b..df317f1e91d 100644
--- a/configs/tuge1_defconfig
+++ b/configs/tuge1_defconfig
@@ -7,7 +7,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ENV_ADDR=0xF00C0000
-CONFIG_MPC83xx=y
+CONFIG_MPC83XX=y
CONFIG_HIGH_BATS=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_TUGE1=y
diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig
index 02b369beacf..22f34cee766 100644
--- a/configs/tuxx1_defconfig
+++ b/configs/tuxx1_defconfig
@@ -7,7 +7,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ENV_ADDR=0xF00C0000
-CONFIG_MPC83xx=y
+CONFIG_MPC83XX=y
CONFIG_HIGH_BATS=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_TUXX1=y
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 09aa97ee8c0..07049f6dd46 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -138,10 +138,10 @@ config CLK_K210_SET_RATE
feature adds around 1K to U-Boot's final size.
config CLK_MPC83XX
- bool "Enable MPC83xx clock driver"
+ bool "Enable MPC83XX clock driver"
depends on CLK
help
- Support for the clock driver of the MPC83xx series of SoCs.
+ Support for the clock driver of the MPC83XX series of SoCs.
config CLK_OCTEON
bool "Clock controller driver for Marvell MIPS Octeon"
diff --git a/drivers/clk/mpc83xx_clk.c b/drivers/clk/mpc83xx_clk.c
index 0255ccaf8a4..736fcf09291 100644
--- a/drivers/clk/mpc83xx_clk.c
+++ b/drivers/clk/mpc83xx_clk.c
@@ -22,7 +22,7 @@
DECLARE_GLOBAL_DATA_PTR;
/**
- * struct mpc83xx_clk_priv - Private data structure for the MPC83xx clock
+ * struct mpc83xx_clk_priv - Private data structure for the MPC83XX clock
* driver
* @speed: Array containing the speed values of all system clocks (initialized
* once, then only read back)
@@ -286,7 +286,7 @@ static ulong mpc83xx_clk_get_rate(struct clk *clk)
static int mpc83xx_clk_enable(struct clk *clk)
{
- /* MPC83xx clocks are always enabled */
+ /* MPC83XX clocks are always enabled */
return 0;
}
diff --git a/drivers/clk/mpc83xx_clk.h b/drivers/clk/mpc83xx_clk.h
index c06a51ecd43..08b2695572f 100644
--- a/drivers/clk/mpc83xx_clk.h
+++ b/drivers/clk/mpc83xx_clk.h
@@ -172,12 +172,12 @@ static void set_mode(struct clk_mode *mode, u8 low, u8 high, int type)
* retrieve_mode() - Get the clock mode description for a specific clock
* @clk: The identifier of the clock for which the clock description should
* be retrieved
- * @soc_type: The type of MPC83xx SoC for which the clock description should be
+ * @soc_type: The type of MPC83XX SoC for which the clock description should be
* retrieved
* @mode: Pointer to a clk_mode structure to be filled with data for the
* clock
*
- * Since some clock rate are stored in different places on different MPC83xx
+ * Since some clock rate are stored in different places on different MPC83XX
* SoCs, the SoC type has to be supplied along with the clock's identifier.
*
* Return: 0 if OK, -ve on error
@@ -269,7 +269,7 @@ static int retrieve_mode(int clk, int soc_type, struct clk_mode *mode)
/**
* get_spmr() - Read the SPMR (System PLL Mode Register)
- * @im: Pointer to the MPC83xx main register map in question
+ * @im: Pointer to the MPC83XX main register map in question
*
* Return: The SPMR value as a 32-bit number.
*/
@@ -282,7 +282,7 @@ static inline u32 get_spmr(immap_t *im)
/**
* get_sccr() - Read the SCCR (System Clock Control Register)
- * @im: Pointer to the MPC83xx main register map in question
+ * @im: Pointer to the MPC83XX main register map in question
*
* Return: The SCCR value as a 32-bit number.
*/
@@ -295,7 +295,7 @@ static inline u32 get_sccr(immap_t *im)
/**
* get_lcrr() - Read the LCRR (Clock Ratio Register)
- * @im: Pointer to the MPC83xx main register map in question
+ * @im: Pointer to the MPC83XX main register map in question
*
* Return: The LCRR value as a 32-bit number.
*/
@@ -308,7 +308,7 @@ static inline u32 get_lcrr(immap_t *im)
/**
* get_pci_sync_in() - Read the PCI synchronization clock speed
- * @im: Pointer to the MPC83xx main register map in question
+ * @im: Pointer to the MPC83XX main register map in question
*
* Return: The PCI synchronization clock speed value as a 32-bit number.
*/
@@ -322,7 +322,7 @@ static inline u32 get_pci_sync_in(immap_t *im)
/**
* get_csb_clk() - Read the CSB (Coheren System Bus) clock speed
- * @im: Pointer to the MPC83xx main register map in question
+ * @im: Pointer to the MPC83XX main register map in question
*
* Return: The CSB clock speed value as a 32-bit number.
*/
@@ -336,7 +336,7 @@ static inline u32 get_csb_clk(immap_t *im)
/**
* spmr_field() - Read a specific SPMR field
- * @im: Pointer to the MPC83xx main register map in question
+ * @im: Pointer to the MPC83XX main register map in question
* @mask: A bitmask that describes the bitfield to be read
*
* Return: The value of the bit field as a 32-bit number.
@@ -351,7 +351,7 @@ static inline uint spmr_field(immap_t *im, u32 mask)
/**
* sccr_field() - Read a specific SCCR field
- * @im: Pointer to the MPC83xx main register map in question
+ * @im: Pointer to the MPC83XX main register map in question
* @mask: A bitmask that describes the bitfield to be read
*
* Return: The value of the bit field as a 32-bit number.
@@ -366,7 +366,7 @@ static inline uint sccr_field(immap_t *im, u32 mask)
/**
* lcrr_field() - Read a specific LCRR field
- * @im: Pointer to the MPC83xx main register map in question
+ * @im: Pointer to the MPC83XX main register map in question
* @mask: A bitmask that describes the bitfield to be read
*
* Return: The value of the bit field as a 32-bit number.
diff --git a/drivers/cpu/Kconfig b/drivers/cpu/Kconfig
index 3bf04105e5e..618776638cd 100644
--- a/drivers/cpu/Kconfig
+++ b/drivers/cpu/Kconfig
@@ -8,11 +8,11 @@ config CPU
finding out information about available CPUs and making changes.
config CPU_MPC83XX
- bool "Enable MPC83xx CPU driver"
- depends on CPU && MPC83xx
+ bool "Enable MPC83XX CPU driver"
+ depends on CPU && MPC83XX
select CLK_MPC83XX
help
- Support CPU cores for SoCs of the MPC83xx series.
+ Support CPU cores for SoCs of the MPC83XX series.
config CPU_RISCV
bool "Enable RISC-V CPU driver"
diff --git a/drivers/cpu/mpc83xx_cpu.c b/drivers/cpu/mpc83xx_cpu.c
index e451c11116a..371fb694570 100644
--- a/drivers/cpu/mpc83xx_cpu.c
+++ b/drivers/cpu/mpc83xx_cpu.c
@@ -16,10 +16,10 @@
#include "mpc83xx_cpu.h"
/**
- * struct mpc83xx_cpu_priv - Private data for MPC83xx CPUs
- * @e300_type: The e300 core type of the MPC83xx CPU
- * @family: The MPC83xx family the CPU belongs to
- * @type: The MPC83xx type of the CPU
+ * struct mpc83xx_cpu_priv - Private data for MPC83XX CPUs
+ * @e300_type: The e300 core type of the MPC83XX CPU
+ * @family: The MPC83XX family the CPU belongs to
+ * @type: The MPC83XX type of the CPU
* @is_e_processor: Flag indicating whether the CPU is a E processor or not
* @is_a_variant: Flag indicating whtther the CPU is a A variant or not
* @revid: The revision ID of the CPU
@@ -57,7 +57,7 @@ static inline u32 get_spridr(void)
}
/**
- * determine_type() - Determine CPU family of MPC83xx device
+ * determine_type() - Determine CPU family of MPC83XX device
* @dev: CPU device from which to read CPU family from
*/
static inline void determine_family(const struct udevice *dev)
@@ -92,7 +92,7 @@ static inline void determine_family(const struct udevice *dev)
}
/**
- * determine_type() - Determine CPU type of MPC83xx device
+ * determine_type() - Determine CPU type of MPC83XX device
* @dev: CPU device from which to read CPU type from
*/
static inline void determine_type(const struct udevice *dev)
@@ -166,7 +166,7 @@ static inline void determine_type(const struct udevice *dev)
}
/**
- * determine_e300_type() - Determine e300 core type of MPC83xx device
+ * determine_e300_type() - Determine e300 core type of MPC83XX device
* @dev: CPU device from which to read e300 core type from
*/
static inline void determine_e300_type(const struct udevice *dev)
diff --git a/drivers/cpu/mpc83xx_cpu.h b/drivers/cpu/mpc83xx_cpu.h
index 2aaa4e18844..2704a0c3178 100644
--- a/drivers/cpu/mpc83xx_cpu.h
+++ b/drivers/cpu/mpc83xx_cpu.h
@@ -33,14 +33,14 @@ static const char * const e300_names[] = {
};
/**
- * enum mpc83xx_cpu_family - Identifiers for MPC83xx CPU families
+ * enum mpc83xx_cpu_family - Identifiers for MPC83XX CPU families
* @FAMILY_830X: Identifier for the MPC830x CPU family
* @FAMILY_831X: Identifier for the MPC831x CPU family
* @FAMILY_832X: Identifier for the MPC832x CPU family
* @FAMILY_834X: Identifier for the MPC834x CPU family
* @FAMILY_836X: Identifier for the MPC836x CPU family
* @FAMILY_837X: Identifier for the MPC837x CPU family
- * @FAMILY_UNKNOWN: Identifier for an unknown MPC83xx CPU family
+ * @FAMILY_UNKNOWN: Identifier for an unknown MPC83XX CPU family
*/
enum mpc83xx_cpu_family {
FAMILY_830X,
@@ -53,7 +53,7 @@ enum mpc83xx_cpu_family {
};
/**
- * enum mpc83xx_cpu_type - Identifiers for MPC83xx CPU types
+ * enum mpc83xx_cpu_type - Identifiers for MPC83XX CPU types
* @TYPE_8308: Identifier for the MPC8308 CPU type
* @TYPE_8309: Identifier for the MPC8309 CPU type
* @TYPE_8311: Identifier for the MPC8311 CPU type
@@ -76,7 +76,7 @@ enum mpc83xx_cpu_family {
* @TYPE_8377: Identifier for the MPC8377 CPU type
* @TYPE_8378: Identifier for the MPC8378 CPU type
* @TYPE_8379: Identifier for the MPC8379 CPU type
- * @TYPE_UNKNOWN: Identifier for an unknown MPC83xx CPU type
+ * @TYPE_UNKNOWN: Identifier for an unknown MPC83XX CPU type
*/
enum mpc83xx_cpu_type {
TYPE_8308,
diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig
index 7f8f3570dd8..5c928689a30 100644
--- a/drivers/ddr/fsl/Kconfig
+++ b/drivers/ddr/fsl/Kconfig
@@ -173,7 +173,7 @@ config DDR_ECC
config DDR_ECC_CMD
bool "Access the ECC features of the memory controller"
- depends on DDR_ECC && MPC83xx
+ depends on DDR_ECC && MPC83XX
default y
config ECC_INIT_VIA_DDRCONTROLLER
@@ -199,7 +199,7 @@ config SYS_FSL_DDR_INTLV_256B
endif
menu "PowerPC / M68K initial memory controller definitions (FLASH, SDRAM, etc)"
- depends on MCF52x2 || MPC8xx || MPC83xx || MPC85xx
+ depends on MCF52x2 || MPC8xx || MPC83XX || MPC85xx
config SYS_BR0_PRELIM_BOOL
bool "Define Bank 0"
diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c
index cd332718b64..81d081fabb0 100644
--- a/drivers/ddr/fsl/main.c
+++ b/drivers/ddr/fsl/main.c
@@ -29,7 +29,7 @@
* 0x80_8000_0000 ~ 0xff_ffff_ffff
*/
#ifndef CFG_SYS_FSL_DDR_SDRAM_BASE_PHY
-#ifdef CONFIG_MPC83xx
+#ifdef CONFIG_MPC83XX
#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY CFG_SYS_SDRAM_BASE
#else
#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY CFG_SYS_DDR_SDRAM_BASE
diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c
index 700df2236bd..4f264c83f0c 100644
--- a/drivers/dma/fsl_dma.c
+++ b/drivers/dma/fsl_dma.c
@@ -16,15 +16,15 @@
/* Controller can only transfer 2^26 - 1 bytes at a time */
#define FSL_DMA_MAX_SIZE (0x3ffffff)
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
#define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_CTM_DIRECT | FSL_DMA_MR_DMSEN)
#else
#define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT)
#endif
-#if defined(CONFIG_MPC83xx)
-dma83xx_t *dma_base = (void *)(CFG_SYS_MPC83xx_DMA_ADDR);
+#if defined(CONFIG_MPC83XX)
+dma83xx_t *dma_base = (void *)(CFG_SYS_MPC83XX_DMA_ADDR);
#elif defined(CONFIG_MPC85xx)
ccsr_dma_t *dma_base = (void *)(CFG_SYS_MPC85xx_DMA_ADDR);
#elif defined(CONFIG_MPC86xx)
@@ -44,7 +44,7 @@ static void dma_sync(void)
static void out_dma32(volatile unsigned *addr, int val)
{
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
out_le32(addr, val);
#else
out_be32(addr, val);
@@ -53,7 +53,7 @@ static void out_dma32(volatile unsigned *addr, int val)
static uint in_dma32(volatile unsigned *addr)
{
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
return in_le32(addr);
#else
return in_be32(addr);
@@ -79,7 +79,7 @@ static uint dma_check(void) {
return status;
}
-#if !defined(CONFIG_MPC83xx)
+#if !defined(CONFIG_MPC83XX)
void dma_init(void) {
volatile fsl_dma_t *dma = &dma_base->dma[0];
@@ -99,7 +99,7 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) {
out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF));
out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF));
-#if !defined(CONFIG_MPC83xx)
+#if !defined(CONFIG_MPC83XX)
out_dma32(&dma->satr,
in_dma32(&dma->satr) | (u32)((u64)src >> 32));
out_dma32(&dma->datr,
@@ -131,7 +131,7 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) {
/*
* 85xx/86xx use dma to initialize SDRAM when !CONFIG_ECC_INIT_VIA_DDRCONTROLLER
*/
-#if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) && \
+#if ((!defined CONFIG_MPC83XX && defined(CONFIG_DDR_ECC) && \
!defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)))
void dma_meminit(uint size)
{
diff --git a/drivers/gpio/mpc83xx_gpio.c b/drivers/gpio/mpc83xx_gpio.c
index bf693c8d457..0e3286c915a 100644
--- a/drivers/gpio/mpc83xx_gpio.c
+++ b/drivers/gpio/mpc83xx_gpio.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Freescale MPC83xx GPIO handling.
+ * Freescale MPC83XX GPIO handling.
*/
#include <common.h>
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index b07261d3db5..5657c39cfb6 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -581,10 +581,10 @@ config GDSYS_IOEP
Support gdsys FPGA's IO endpoint driver.
config MPC83XX_SERDES
- bool "Enable MPC83xx serdes driver"
+ bool "Enable MPC83XX serdes driver"
depends on MISC
help
- Support for serdes found on MPC83xx SoCs.
+ Support for serdes found on MPC83XX SoCs.
config FS_LOADER
bool "Enable loader driver for file system"
diff --git a/drivers/misc/mpc83xx_serdes.c b/drivers/misc/mpc83xx_serdes.c
index 93c87e998c4..c117e2aa363 100644
--- a/drivers/misc/mpc83xx_serdes.c
+++ b/drivers/misc/mpc83xx_serdes.c
@@ -3,7 +3,7 @@
* (C) Copyright 2018
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
*
- * base on the MPC83xx serdes initialization, which is
+ * base on the MPC83XX serdes initialization, which is
*
* Copyright 2007,2011 Freescale Semiconductor, Inc.
* Copyright (C) 2008 MontaVista Software, Inc.
@@ -19,7 +19,7 @@
#include "mpc83xx_serdes.h"
/**
- * struct mpc83xx_serdes_priv - Private structure for MPC83xx serdes
+ * struct mpc83xx_serdes_priv - Private structure for MPC83XX serdes
* @regs: The device's register map
* @rfcks: Variable to keep the serdes reference clock selection set during
* initialization in (is or'd to every value written to SRDSCR4)
diff --git a/drivers/mtd/nand/raw/fsl_elbc_spl.c b/drivers/mtd/nand/raw/fsl_elbc_spl.c
index 26aaab08e89..beda275fcf4 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_spl.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_spl.c
@@ -16,7 +16,7 @@
#include <asm/fsl_lbc.h>
#include <nand.h>
-#ifdef CONFIG_MPC83xx
+#ifdef CONFIG_MPC83XX
#include "../../../arch/powerpc/cpu/mpc83xx/elbc/elbc.h"
#endif
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index e085119963b..016603da52e 100644
--- a/drivers/ram/Kconfig
+++ b/drivers/ram/Kconfig
@@ -38,7 +38,7 @@ config MPC83XX_SDRAM
bool "Enable MPC83XX SDRAM support"
depends on RAM
help
- Enable support for the internal DDR Memory Controller of the MPC83xx
+ Enable support for the internal DDR Memory Controller of the MPC83XX
family of SoCs. Both static configurations, as well as configuring
the RAM through the use of SPD (Serial Presence Detect) is supported
via device tree settings.
diff --git a/drivers/ram/mpc83xx_sdram.c b/drivers/ram/mpc83xx_sdram.c
index 11676d4fae7..9d13ffe3284 100644
--- a/drivers/ram/mpc83xx_sdram.c
+++ b/drivers/ram/mpc83xx_sdram.c
@@ -122,7 +122,7 @@ phys_size_t get_effective_memsize(void)
}
/**
- * struct mpc83xx_sdram_priv - Private data for MPC83xx RAM controllers
+ * struct mpc83xx_sdram_priv - Private data for MPC83XX RAM controllers
* @total_size: The total size of all RAM modules associated with this RAM
* controller in bytes
*/
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 6869d60d97b..15144b1f1a3 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -84,7 +84,7 @@ static int mpc8xxx_spi_probe(struct udevice *dev)
spi8xxx_t *spi = priv->spi;
/*
- * SPI pins on the MPC83xx are not muxed, so all we do is initialize
+ * SPI pins on the MPC83XX are not muxed, so all we do is initialize
* some registers
*/
out_be32(&priv->spi->mode, SPI_MODE_REV | SPI_MODE_MS);
diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index 03f7fdd5978..87f9e404cff 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -189,9 +189,9 @@ config SYSRESET_TPL_X86
Reboot support for generic x86 processor reset in TPL.
config SYSRESET_MPC83XX
- bool "Enable support MPC83xx SoC family reboot driver"
+ bool "Enable support MPC83XX SoC family reboot driver"
help
- Reboot support for NXP MPC83xx SoCs.
+ Reboot support for NXP MPC83XX SoCs.
endif
diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
index 6d6665005cf..7e75902a335 100644
--- a/drivers/timer/Kconfig
+++ b/drivers/timer/Kconfig
@@ -153,11 +153,11 @@ config GXP_TIMER
present on HPE GXP SoCs.
config MPC83XX_TIMER
- bool "MPC83xx timer support"
+ bool "MPC83XX timer support"
depends on TIMER
help
Select this to enable support for the timer found on
- devices based on the MPC83xx family of SoCs.
+ devices based on the MPC83XX family of SoCs.
config RENESAS_OSTM_TIMER
bool "Renesas RZ/A1 R7S72100 OSTM Timer"
diff --git a/drivers/timer/mpc83xx_timer.c b/drivers/timer/mpc83xx_timer.c
index 7814cb6a5d6..979cac325e1 100644
--- a/drivers/timer/mpc83xx_timer.c
+++ b/drivers/timer/mpc83xx_timer.c
@@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR;
#endif
/**
- * struct mpc83xx_timer_priv - Private data structure for MPC83xx timer driver
+ * struct mpc83xx_timer_priv - Private data structure for MPC83XX timer driver
* @decrementer_count: Value to which the decrementer register should be re-set
* to when a timer interrupt occurs, thus determines the
* interrupt frequency (value for 1e6/HZ microseconds)
diff --git a/env/Kconfig b/env/Kconfig
index 688f34841fa..e377d88eb2a 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -116,7 +116,7 @@ config ENV_IS_IN_FLASH
default y if ARCH_INTEGRATOR_CP
default y if M548x || M547x || M5282
default y if MCF532X || MCF52x2
- default y if MPC86xx || MPC83xx
+ default y if MPC86xx || MPC83XX
default y if ARCH_MPC8548
default y if SH && !CPU_SH4
help
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index 70303acd558..64dfb66c7cb 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -43,7 +43,7 @@ struct bd_info {
#if defined(CONFIG_M68K)
unsigned long bi_mbar_base; /* base of internal registers */
#endif
-#if defined(CONFIG_MPC83xx)
+#if defined(CONFIG_MPC83XX)
unsigned long bi_immrbar;
#endif
unsigned long bi_bootflags; /* boot / reboot flag (Unused) */
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 70b1c399241..c7b95687b61 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -175,7 +175,7 @@
#define CFG_SYS_PCIE2_IO_PHYS 0xD8000000
#ifdef CONFIG_MMC
-#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC83xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC83XX_ESDHC_ADDR
#endif
/*
diff --git a/include/linux/immap_qe.h b/include/linux/immap_qe.h
index 45307f51c10..a46f001b44e 100644
--- a/include/linux/immap_qe.h
+++ b/include/linux/immap_qe.h
@@ -11,7 +11,7 @@
#ifndef __IMMAP_QE_H__
#define __IMMAP_QE_H__
-#ifdef CONFIG_MPC83xx
+#ifdef CONFIG_MPC83XX
#if defined(CONFIG_ARCH_MPC8360)
#define QE_MURAM_SIZE 0xc000UL
#define MAX_QE_RISC 2
diff --git a/include/serial.h b/include/serial.h
index 42bdf3759c0..ceab714f541 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -27,7 +27,7 @@ extern struct serial_device serial_smh_device;
extern struct serial_device serial_scc_device;
extern struct serial_device *default_serial_console(void);
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
+#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx) || \
defined(CONFIG_ARCH_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \
defined(CONFIG_MICROBLAZE)
diff --git a/post/Makefile b/post/Makefile
index afd49403c28..e95eb954b43 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -8,4 +8,4 @@ obj-y += tests.o
obj-y += drivers/
obj-$(CONFIG_PPC) += lib_powerpc/
-obj-$(CONFIG_MPC83xx) += cpu/mpc83xx/
+obj-$(CONFIG_MPC83XX) += cpu/mpc83xx/
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 40/87] gpio: Drop unused mpc83xx_gpio driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (38 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 39/87] ppc: Rename MPC83xx Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 41/87] ppc: Rename MPC85xx Simon Glass
` (47 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used since this commit:
7458f18e5c2 ppc: Remove MPC8313ERDB boards
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/gpio/Makefile | 1 -
drivers/gpio/mpc83xx_gpio.c | 183 ------------------------------------
2 files changed, 184 deletions(-)
delete mode 100644 drivers/gpio/mpc83xx_gpio.c
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ec65f70c318..889a88dc885 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_TEGRA_GPIO) += tegra_gpio.o
obj-$(CONFIG_TEGRA186_GPIO) += tegra186_gpio.o
obj-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o
obj-$(CONFIG_ALTERA_PIO) += altera_pio.o
-obj-$(CONFIG_MPC83XX_GPIO) += mpc83xx_gpio.o
obj-$(CONFIG_MPC8XXX_GPIO) += mpc8xxx_gpio.o
obj-$(CONFIG_MPC83XX_SPISEL_BOOT) += mpc83xx_spisel_boot.o
obj-$(CONFIG_SH_GPIO_PFC) += sh_pfc.o
diff --git a/drivers/gpio/mpc83xx_gpio.c b/drivers/gpio/mpc83xx_gpio.c
deleted file mode 100644
index 0e3286c915a..00000000000
--- a/drivers/gpio/mpc83xx_gpio.c
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale MPC83XX GPIO handling.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <mpc83xx.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-
-#ifndef CFG_MPC83XX_GPIO_0_INIT_DIRECTION
-#define CFG_MPC83XX_GPIO_0_INIT_DIRECTION 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_1_INIT_DIRECTION
-#define CFG_MPC83XX_GPIO_1_INIT_DIRECTION 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN
-#define CFG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN
-#define CFG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_0_INIT_VALUE
-#define CFG_MPC83XX_GPIO_0_INIT_VALUE 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_1_INIT_VALUE
-#define CFG_MPC83XX_GPIO_1_INIT_VALUE 0
-#endif
-
-static unsigned int gpio_output_value[MPC83XX_GPIO_CTRLRS];
-
-/*
- * Generic_GPIO primitives.
- */
-
-int gpio_request(unsigned gpio, const char *label)
-{
- if (gpio >= MAX_NUM_GPIOS)
- return -1;
-
- return 0;
-}
-
-int gpio_free(unsigned gpio)
-{
- /* Do not set to input */
- return 0;
-}
-
-/* set GPIO pin 'gpio' as an input */
-int gpio_direction_input(unsigned gpio)
-{
- immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- unsigned int ctrlr;
- unsigned int line;
- unsigned int line_mask;
-
- /* 32-bits per controller */
- ctrlr = gpio >> 5;
- line = gpio & (0x1F);
-
- /* Big endian */
- line_mask = 1 << (31 - line);
-
- clrbits_be32(&im->gpio[ctrlr].dir, line_mask);
-
- return 0;
-}
-
-/* set GPIO pin 'gpio' as an output, with polarity 'value' */
-int gpio_direction_output(unsigned gpio, int value)
-{
- immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- unsigned int ctrlr;
- unsigned int line;
- unsigned int line_mask;
-
- if (value != 0 && value != 1) {
- printf("Error: Value parameter must be 0 or 1.\n");
- return -1;
- }
-
- gpio_set_value(gpio, value);
-
- /* 32-bits per controller */
- ctrlr = gpio >> 5;
- line = gpio & (0x1F);
-
- /* Big endian */
- line_mask = 1 << (31 - line);
-
- /* Make the line output */
- setbits_be32(&im->gpio[ctrlr].dir, line_mask);
-
- return 0;
-}
-
-/* read GPIO IN value of pin 'gpio' */
-int gpio_get_value(unsigned gpio)
-{
- immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- unsigned int ctrlr;
- unsigned int line;
- unsigned int line_mask;
-
- /* 32-bits per controller */
- ctrlr = gpio >> 5;
- line = gpio & (0x1F);
-
- /* Big endian */
- line_mask = 1 << (31 - line);
-
- /* Read the value and mask off the bit */
- return (in_be32(&im->gpio[ctrlr].dat) & line_mask) != 0;
-}
-
-/* write GPIO OUT value to pin 'gpio' */
-int gpio_set_value(unsigned gpio, int value)
-{
- immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- unsigned int ctrlr;
- unsigned int line;
- unsigned int line_mask;
-
- if (value != 0 && value != 1) {
- printf("Error: Value parameter must be 0 or 1.\n");
- return -1;
- }
-
- /* 32-bits per controller */
- ctrlr = gpio >> 5;
- line = gpio & (0x1F);
-
- /* Big endian */
- line_mask = 1 << (31 - line);
-
- /* Update the local output buffer soft copy */
- gpio_output_value[ctrlr] =
- (gpio_output_value[ctrlr] & ~line_mask) | \
- (value ? line_mask : 0);
-
- /* Write the output */
- out_be32(&im->gpio[ctrlr].dat, gpio_output_value[ctrlr]);
-
- return 0;
-}
-
-/* Configure GPIO registers early */
-void mpc83xx_gpio_init_f(void)
-{
- immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
-#if MPC83XX_GPIO_CTRLRS >= 1
- out_be32(&im->gpio[0].dir, CFG_MPC83XX_GPIO_0_INIT_DIRECTION);
- out_be32(&im->gpio[0].odr, CFG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN);
- out_be32(&im->gpio[0].dat, CFG_MPC83XX_GPIO_0_INIT_VALUE);
- out_be32(&im->gpio[0].ier, 0xFFFFFFFF); /* Clear all events */
- out_be32(&im->gpio[0].imr, 0);
- out_be32(&im->gpio[0].icr, 0);
-#endif
-
-#if MPC83XX_GPIO_CTRLRS >= 2
- out_be32(&im->gpio[1].dir, CFG_MPC83XX_GPIO_1_INIT_DIRECTION);
- out_be32(&im->gpio[1].odr, CFG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN);
- out_be32(&im->gpio[1].dat, CFG_MPC83XX_GPIO_1_INIT_VALUE);
- out_be32(&im->gpio[1].ier, 0xFFFFFFFF); /* Clear all events */
- out_be32(&im->gpio[1].imr, 0);
- out_be32(&im->gpio[1].icr, 0);
-#endif
-}
-
-/* Initialize GPIO soft-copies */
-void mpc83xx_gpio_init_r(void)
-{
-#if MPC83XX_GPIO_CTRLRS >= 1
- gpio_output_value[0] = CFG_MPC83XX_GPIO_0_INIT_VALUE;
-#endif
-
-#if MPC83XX_GPIO_CTRLRS >= 2
- gpio_output_value[1] = CFG_MPC83XX_GPIO_1_INIT_VALUE;
-#endif
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 41/87] ppc: Rename MPC85xx
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (39 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 40/87] gpio: Drop unused mpc83xx_gpio driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 42/87] powerpc: Rename MPC86xx Simon Glass
` (46 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Tom Rini, Simon Glass, Andy Fleming, Mario Six, Priyanka Jain,
Stefan Roese, Wolfgang Denk
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Kconfig | 2 +-
arch/Kconfig.nxp | 6 +-
arch/powerpc/Kconfig | 8 +-
arch/powerpc/Makefile | 2 +-
arch/powerpc/cpu/Makefile | 2 +-
arch/powerpc/cpu/mpc83xx/cpu.c | 2 +-
arch/powerpc/cpu/mpc85xx/Kconfig | 16 +-
arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/c29x_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/cpu.c | 10 +-
arch/powerpc/cpu/mpc85xx/cpu_init.c | 34 +-
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 14 +-
arch/powerpc/cpu/mpc85xx/fdt.c | 6 +-
.../powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 4 +-
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 10 +-
arch/powerpc/cpu/mpc85xx/interrupts.c | 8 +-
arch/powerpc/cpu/mpc85xx/mp.c | 32 +-
arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c | 8 +-
arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c | 10 +-
arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/p1010_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/p1021_serdes.c | 8 +-
arch/powerpc/cpu/mpc85xx/p1023_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/p2020_serdes.c | 6 +-
arch/powerpc/cpu/mpc85xx/qe_io.c | 2 +-
arch/powerpc/cpu/mpc85xx/speed.c | 14 +-
arch/powerpc/cpu/mpc85xx/spl_minimal.c | 6 +-
arch/powerpc/cpu/mpc85xx/start.S | 28 +-
arch/powerpc/cpu/mpc8xxx/Makefile | 2 +-
arch/powerpc/cpu/mpc8xxx/cpu.c | 12 +-
arch/powerpc/cpu/mpc8xxx/fdt.c | 4 +-
arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 4 +-
arch/powerpc/cpu/mpc8xxx/law.c | 2 +-
arch/powerpc/cpu/mpc8xxx/srio.c | 12 +-
arch/powerpc/include/asm/config.h | 2 +-
arch/powerpc/include/asm/config_mpc85xx.h | 8 +-
arch/powerpc/include/asm/fsl_lbc.h | 4 +-
arch/powerpc/include/asm/fsl_liodn.h | 26 +-
arch/powerpc/include/asm/fsl_pci.h | 2 +-
arch/powerpc/include/asm/global_data.h | 6 +-
arch/powerpc/include/asm/immap_85xx.h | 728 +++++++++---------
arch/powerpc/include/asm/mpc85xx_gpio.h | 4 +-
arch/powerpc/include/asm/ppc.h | 8 +-
arch/powerpc/include/asm/processor.h | 8 +-
arch/powerpc/lib/bootm.c | 2 +-
arch/powerpc/lib/ppccache.S | 4 +-
board/freescale/common/fsl_chain_of_trust.c | 12 +-
board/freescale/common/fsl_validate.c | 8 +-
board/freescale/common/mpc85xx_sleep.c | 6 +-
board/freescale/common/via.h | 4 +-
board/freescale/common/vid.c | 2 +-
board/freescale/mpc8548cds/mpc8548cds.c | 6 +-
board/freescale/p1010rdb/p1010rdb.c | 28 +-
board/freescale/p1010rdb/spl.c | 6 +-
board/freescale/p1010rdb/spl_minimal.c | 4 +-
board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 20 +-
board/freescale/p1_p2_rdb_pc/spl.c | 8 +-
board/freescale/p1_p2_rdb_pc/spl_minimal.c | 4 +-
board/freescale/p2041rdb/p2041rdb.c | 4 +-
board/freescale/t102xrdb/eth_t102xrdb.c | 2 +-
board/freescale/t102xrdb/spl.c | 6 +-
board/freescale/t102xrdb/t102xrdb.c | 16 +-
board/freescale/t104xrdb/spl.c | 2 +-
board/freescale/t104xrdb/t104xrdb.c | 2 +-
board/freescale/t208xqds/eth_t208xqds.c | 6 +-
board/freescale/t208xqds/spl.c | 2 +-
board/freescale/t208xqds/t208xqds.c | 2 +-
board/freescale/t208xrdb/spl.c | 2 +-
board/freescale/t4rdb/eth.c | 2 +-
board/freescale/t4rdb/spl.c | 2 +-
board/keymile/Kconfig | 4 +-
board/keymile/kmcent2/kmcent2.c | 6 +-
board/socrates/socrates.c | 6 +-
board/xes/common/Makefile | 2 +-
board/xes/common/fsl_8xxx_clk.c | 8 +-
board/xes/common/fsl_8xxx_misc.c | 4 +-
boot/Kconfig | 4 +-
common/Kconfig | 2 +-
common/board_r.c | 2 +-
common/memsize.c | 2 +-
configs/MPC8548CDS_36BIT_defconfig | 2 +-
configs/MPC8548CDS_defconfig | 2 +-
configs/MPC8548CDS_legacy_defconfig | 2 +-
configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 +-
configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 +-
configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 +-
configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 +-
configs/P1010RDB-PA_NAND_defconfig | 2 +-
configs/P1010RDB-PA_NOR_defconfig | 2 +-
configs/P1010RDB-PA_SDCARD_defconfig | 2 +-
configs/P1010RDB-PA_SPIFLASH_defconfig | 2 +-
configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 +-
configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 +-
configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 +-
configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 +-
configs/P1010RDB-PB_NAND_defconfig | 2 +-
configs/P1010RDB-PB_NOR_defconfig | 2 +-
configs/P1010RDB-PB_SDCARD_defconfig | 2 +-
configs/P1010RDB-PB_SPIFLASH_defconfig | 2 +-
configs/P1020RDB-PC_36BIT_NAND_defconfig | 2 +-
configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 2 +-
configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 2 +-
configs/P1020RDB-PC_36BIT_defconfig | 2 +-
configs/P1020RDB-PC_NAND_defconfig | 2 +-
configs/P1020RDB-PC_SDCARD_defconfig | 2 +-
configs/P1020RDB-PC_SPIFLASH_defconfig | 2 +-
configs/P1020RDB-PC_defconfig | 2 +-
configs/P1020RDB-PD_NAND_defconfig | 2 +-
configs/P1020RDB-PD_SDCARD_defconfig | 2 +-
configs/P1020RDB-PD_SPIFLASH_defconfig | 2 +-
configs/P1020RDB-PD_defconfig | 2 +-
configs/P2020RDB-PC_36BIT_NAND_defconfig | 2 +-
configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 2 +-
configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 2 +-
configs/P2020RDB-PC_36BIT_defconfig | 2 +-
configs/P2020RDB-PC_NAND_defconfig | 2 +-
configs/P2020RDB-PC_SDCARD_defconfig | 2 +-
configs/P2020RDB-PC_SPIFLASH_defconfig | 2 +-
configs/P2020RDB-PC_defconfig | 2 +-
configs/P2041RDB_NAND_defconfig | 2 +-
configs/P2041RDB_SDCARD_defconfig | 2 +-
configs/P2041RDB_SPIFLASH_defconfig | 2 +-
configs/P2041RDB_defconfig | 2 +-
configs/T1024RDB_NAND_defconfig | 2 +-
configs/T1024RDB_SDCARD_defconfig | 2 +-
configs/T1024RDB_SPIFLASH_defconfig | 2 +-
configs/T1024RDB_defconfig | 2 +-
configs/T1042D4RDB_NAND_defconfig | 2 +-
configs/T1042D4RDB_SDCARD_defconfig | 2 +-
configs/T1042D4RDB_SPIFLASH_defconfig | 2 +-
configs/T1042D4RDB_defconfig | 2 +-
configs/T2080QDS_NAND_defconfig | 2 +-
configs/T2080QDS_SDCARD_defconfig | 2 +-
configs/T2080QDS_SECURE_BOOT_defconfig | 2 +-
configs/T2080QDS_SPIFLASH_defconfig | 2 +-
configs/T2080QDS_SRIO_PCIE_BOOT_defconfig | 2 +-
configs/T2080QDS_defconfig | 2 +-
configs/T2080RDB_NAND_defconfig | 2 +-
configs/T2080RDB_SDCARD_defconfig | 2 +-
configs/T2080RDB_SPIFLASH_defconfig | 2 +-
configs/T2080RDB_defconfig | 2 +-
configs/T2080RDB_revD_NAND_defconfig | 2 +-
configs/T2080RDB_revD_SDCARD_defconfig | 2 +-
configs/T2080RDB_revD_SPIFLASH_defconfig | 2 +-
configs/T2080RDB_revD_defconfig | 2 +-
configs/T4240RDB_SDCARD_defconfig | 2 +-
configs/T4240RDB_defconfig | 2 +-
configs/kmcent2_defconfig | 2 +-
configs/qemu-ppce500_defconfig | 2 +-
configs/socrates_defconfig | 2 +-
drivers/ata/fsl_sata.c | 2 +-
drivers/ddr/fsl/Kconfig | 4 +-
drivers/ddr/fsl/ctrl_regs.c | 2 +-
drivers/ddr/fsl/mpc85xx_ddr_gen2.c | 4 +-
drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 2 +-
drivers/dma/fsl_dma.c | 6 +-
drivers/i2c/Kconfig | 2 +-
drivers/net/fm/b4860.c | 8 +-
drivers/net/fm/p1023.c | 18 +-
drivers/net/fm/p4080.c | 8 +-
drivers/net/fm/p5020.c | 8 +-
drivers/net/fm/p5040.c | 8 +-
drivers/net/fm/t1024.c | 6 +-
drivers/net/fm/t1040.c | 2 +-
drivers/net/fm/t2080.c | 6 +-
drivers/net/fm/t4240.c | 8 +-
drivers/pci/Kconfig | 4 +-
drivers/qe/qe.c | 14 +-
drivers/spi/fsl_espi.c | 2 +-
drivers/usb/host/Kconfig | 2 +-
drivers/watchdog/Kconfig | 4 +-
include/configs/P1010RDB.h | 2 +-
include/configs/P2041RDB.h | 2 +-
include/configs/T102xRDB.h | 2 +-
include/configs/T104xRDB.h | 2 +-
include/configs/T208xQDS.h | 2 +-
include/configs/T208xRDB.h | 2 +-
include/configs/T4240RDB.h | 2 +-
include/configs/p1_p2_rdb_pc.h | 2 +-
include/configs/socrates.h | 2 +-
include/e500.h | 2 +-
include/fsl_ddr_sdram.h | 2 +-
include/fsl_fman.h | 2 +-
include/ioports.h | 2 +-
include/mpc85xx.h | 6 +-
include/pci.h | 2 +-
include/post.h | 4 +-
include/serial.h | 2 +-
include/watchdog.h | 2 +-
189 files changed, 802 insertions(+), 802 deletions(-)
diff --git a/Kconfig b/Kconfig
index a75cce7e28f..530577fbe97 100644
--- a/Kconfig
+++ b/Kconfig
@@ -461,7 +461,7 @@ config BUILD_TARGET
default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
default "u-boot.kwb" if (ARCH_KIRKWOOD || ARMADA_32BIT) && !SPL
- default "u-boot-with-spl.bin" if MPC85xx && !E500MC && !E5500 && !E6500 && SPL
+ default "u-boot-with-spl.bin" if MPC85XX && !E500MC && !E5500 && !E6500 && SPL
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
help
diff --git a/arch/Kconfig.nxp b/arch/Kconfig.nxp
index 6e1c44b7ea8..90347c964f1 100644
--- a/arch/Kconfig.nxp
+++ b/arch/Kconfig.nxp
@@ -24,7 +24,7 @@ config CHAIN_OF_TRUST
select SHA_HW_ACCEL
select SHA_PROG_HW_ACCEL
select ENV_IS_NOWHERE
- select SYS_CPC_REINIT_F if MPC85xx && !SYS_RAMBOOT
+ select SYS_CPC_REINIT_F if MPC85XX && !SYS_RAMBOOT
select CMD_EXT4 if ARM
select CMD_EXT4_WRITE if ARM
imply CMD_BLOB
@@ -246,9 +246,9 @@ endif
config SYS_FSL_NUM_CC_PLLS
int "Number of clock control PLLs"
- depends on MPC85xx || FSL_LSCH2 || FSL_LSCH3 || ARCH_LS1021A || ARCH_LS1028A
+ depends on MPC85XX || FSL_LSCH2 || FSL_LSCH3 || ARCH_LS1021A || ARCH_LS1028A
default 2 if ARCH_LS1021A || ARCH_LS1028A || FSL_LSCH2
- default 6 if FSL_LSCH3 || MPC85xx
+ default 6 if FSL_LSCH3 || MPC85XX
config SYS_FSL_ESDHC_BE
bool
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index eb39a03e997..71d5ea50f54 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -15,8 +15,8 @@ config MPC83XX
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
-config MPC85xx
- bool "MPC85xx"
+config MPC85XX
+ bool "MPC85XX"
select CREATE_ARCH_SYMLINK
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
@@ -36,7 +36,7 @@ endchoice
config FSL_LBC
def_bool y
- depends on (MPC85xx || MPC83XX) && !FSL_IFC
+ depends on (MPC85XX || MPC83XX) && !FSL_IFC
config HIGH_BATS
bool "Enable high BAT registers"
@@ -46,7 +46,7 @@ config HIGH_BATS
config SYS_INIT_RAM_LOCK
bool "Lock some portion of L1 for initial ram stack"
- depends on MPC83XX || MPC85xx
+ depends on MPC83XX || MPC85XX
config SYS_SRIO
bool "Serial RapidIO support"
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 5050f387a6e..e7baacf4b01 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
head-y := arch/powerpc/cpu/$(CPU)/start.o
-head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
+head-$(CONFIG_MPC85XX) += arch/powerpc/cpu/mpc85xx/resetvec.o
libs-y += arch/powerpc/cpu/$(CPU)/
libs-y += arch/powerpc/cpu/
diff --git a/arch/powerpc/cpu/Makefile b/arch/powerpc/cpu/Makefile
index c56f0d78b2d..914f95ca674 100644
--- a/arch/powerpc/cpu/Makefile
+++ b/arch/powerpc/cpu/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_MPC83XX) += mpc8xxx/
-obj-$(CONFIG_MPC85xx) += mpc8xxx/
+obj-$(CONFIG_MPC85XX) += mpc8xxx/
obj-$(CONFIG_MPC86xx) += mpc8xxx/
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index 5e58023bfa8..27e3437fd8e 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -6,7 +6,7 @@
/*
* CPU specific code for the MPC83XX family.
*
- * Derived from the MPC8260 and MPC85xx.
+ * Derived from the MPC8260 and MPC85XX.
*/
#include <common.h>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index e813bf094d1..a31d5f94fd8 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -1,5 +1,5 @@
menu "mpc85xx CPU"
- depends on MPC85xx
+ depends on MPC85XX
config PPC_SPINTABLE_COMPATIBLE
depends on MP
@@ -19,7 +19,7 @@ config SYS_CPU
config CMD_ERRATA
bool "Enable the 'errata' command"
- depends on MPC85xx
+ depends on MPC85XX
default y
help
This enables the 'errata' command which displays a list of errata
@@ -27,7 +27,7 @@ config CMD_ERRATA
config FSL_PREPBL_ESDHC_BOOT_SECTOR
bool "Generate QorIQ pre-PBL eSDHC boot sector"
- depends on MPC85xx
+ depends on MPC85XX
depends on SDCARD
help
With this option final image would have prepended QorIQ pre-PBL eSDHC
@@ -943,7 +943,7 @@ config ARCH_T4240
config MPC85XX_HAVE_RESET_VECTOR
bool "Indicate reset vector at CFG_RESET_VECTOR_ADDRESS - 0xffc"
- depends on MPC85xx
+ depends on MPC85XX
config BTB
bool "toggle branch predition"
@@ -986,7 +986,7 @@ config HETROGENOUS_CLUSTERS
bool
config MAX_CPUS
- int "Maximum number of CPUs permitted for MPC85xx"
+ int "Maximum number of CPUs permitted for MPC85XX"
default 12 if ARCH_T4240
default 8 if ARCH_P4080
default 4 if ARCH_B4860 || \
@@ -1506,14 +1506,14 @@ config SYS_FSL_USB_DUAL_PHY_ENABLE
config SYS_MPC85XX_NO_RESETVEC
bool "Discard resetvec section and move bootpg section up"
- depends on MPC85xx && !MPC85XX_HAVE_RESET_VECTOR
+ depends on MPC85XX && !MPC85XX_HAVE_RESET_VECTOR
help
If this variable is specified, the section .resetvec is not kept and
the section .bootpg is placed in the previous 4k of the .text section.
config SPL_SYS_MPC85XX_NO_RESETVEC
bool "Discard resetvec section and move bootpg section up, in SPL"
- depends on MPC85xx && SPL && !MPC85XX_HAVE_RESET_VECTOR
+ depends on MPC85XX && SPL && !MPC85XX_HAVE_RESET_VECTOR
help
If this variable is specified, the section .resetvec is not kept and
the section .bootpg is placed in the previous 4k of the .text section,
@@ -1521,7 +1521,7 @@ config SPL_SYS_MPC85XX_NO_RESETVEC
config TPL_SYS_MPC85XX_NO_RESETVEC
bool "Discard resetvec section and move bootpg section up, in TPL"
- depends on MPC85xx && TPL && !MPC85XX_HAVE_RESET_VECTOR
+ depends on MPC85XX && TPL && !MPC85XX_HAVE_RESET_VECTOR
help
If this variable is specified, the section .resetvec is not kept and
the section .bootpg is placed in the previous 4k of the .text section,
diff --git a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
index 79213348274..de6afaa2a6a 100644
--- a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
@@ -76,10 +76,10 @@ int is_serdes_configured(enum srds_prtcl prtcl)
void fsl_serdes_init(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ u32 srds_cfg = (pordevsr & MPC85XX_PORDEVSR_IO_SEL) >>
+ MPC85XX_PORDEVSR_IO_SEL_SHIFT;
int lane;
if (serdes1_prtcl_map & (1 << NONE))
diff --git a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
index e53dd43f31f..f7b462f6e6f 100644
--- a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
@@ -40,10 +40,10 @@ int is_serdes_configured(enum srds_prtcl device)
void fsl_serdes_init(void)
{
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ u32 srds_cfg = (pordevsr & MPC85XX_PORDEVSR_IO_SEL) >>
+ MPC85XX_PORDEVSR_IO_SEL_SHIFT;
const struct serdes_config *ptr;
int lane;
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index e8a3e82765f..9f9742f3aad 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -59,7 +59,7 @@ int checkcpu (void)
#if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || \
defined(CONFIG_STATIC_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
ccsr_gur_t __iomem *gur =
- (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#endif
/*
@@ -76,8 +76,8 @@ int checkcpu (void)
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#else /* CONFIG_FSL_CORENET */
#if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ)
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85XX_PORPLLSR_DDR_RATIO)
+ >> MPC85XX_PORPLLSR_DDR_RATIO_SHIFT;
#else
u32 ddr_ratio = 0;
#endif /* CONFIG_DYNAMIC_DDR_CLK_FREQ || CONFIG_STATIC_DDR_CLK_FREQ */
@@ -319,7 +319,7 @@ int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
val |= 0x70000000;
mtspr(DBCR0,val);
#else
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
/* Call board-specific preparation for reset */
board_reset_prepare();
@@ -436,7 +436,7 @@ int dram_init(void)
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
unsigned int x = 10;
unsigned int i;
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 96183ac2c84..5e3e5a7b526 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -313,7 +313,7 @@ static void corenet_tb_init(void)
#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
void fsl_erratum_a007212_workaround(void)
{
- ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 ddr_pll_ratio;
u32 __iomem *plldgdcr1 = (void *)(CFG_SYS_DCSRBAR + 0x21c20);
u32 __iomem *plldadcr1 = (void *)(CFG_SYS_DCSRBAR + 0x21c28);
@@ -379,13 +379,13 @@ ulong cpu_init_f(void)
{
extern void m8560_cpm_reset (void);
#ifdef CFG_SYS_DCSRBAR_PHYS
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#endif
#if defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SYS_RAMBOOT)
struct law_entry law;
#endif
#ifdef CONFIG_ARCH_MPC8548
- ccsr_local_ecm_t *ecm = (void *)(CFG_SYS_MPC85xx_ECM_ADDR);
+ ccsr_local_ecm_t *ecm = (void *)(CFG_SYS_MPC85XX_ECM_ADDR);
uint svr = get_svr();
/*
@@ -455,7 +455,7 @@ int enable_cluster_l2(void)
{
int i = 0;
u32 cluster, svr = get_svr();
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
struct ccsr_cluster_l2 __iomem *l2cache;
/* only the L2 of first cluster should be enabled as expected on T4080,
@@ -516,7 +516,7 @@ int l2cache_init(void)
{
__maybe_unused u32 svr = get_svr();
#ifdef CONFIG_L2_CACHE
- ccsr_l2cache_t *l2cache = (void __iomem *)CFG_SYS_MPC85xx_L2_ADDR;
+ ccsr_l2cache_t *l2cache = (void __iomem *)CFG_SYS_MPC85XX_L2_ADDR;
#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
struct ccsr_cluster_l2 * l2cache = (void __iomem *)CFG_SYS_FSL_CLUSTER_1_L2;
#endif
@@ -534,20 +534,20 @@ int l2cache_init(void)
cache_ctl = l2cache->l2ctl;
#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L2_ADDR)
- if (cache_ctl & MPC85xx_L2CTL_L2E) {
+ if (cache_ctl & MPC85XX_L2CTL_L2E) {
/* Clear L2 SRAM memory-mapped base address */
out_be32(&l2cache->l2srbar0, 0x0);
out_be32(&l2cache->l2srbar1, 0x0);
/* set MBECCDIS=0, SBECCDIS=0 */
clrbits_be32(&l2cache->l2errdis,
- (MPC85xx_L2ERRDIS_MBECC |
- MPC85xx_L2ERRDIS_SBECC));
+ (MPC85XX_L2ERRDIS_MBECC |
+ MPC85XX_L2ERRDIS_SBECC));
/* set L2E=0, L2SRAM=0 */
clrbits_be32(&l2cache->l2ctl,
- (MPC85xx_L2CTL_L2E |
- MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ (MPC85XX_L2CTL_L2E |
+ MPC85XX_L2CTL_L2SRAM_ENTIRE));
}
#endif
@@ -588,11 +588,11 @@ int l2cache_init(void)
break;
}
- if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
+ if (l2cache->l2ctl & MPC85XX_L2CTL_L2E) {
puts("already enabled");
#if defined(CFG_SYS_INIT_L2_ADDR) && defined(CFG_SYS_FLASH_BASE)
u32 l2srbar = l2cache->l2srbar0;
- if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
+ if (l2cache->l2ctl & MPC85XX_L2CTL_L2SRAM_ENTIRE
&& l2srbar >= CFG_SYS_FLASH_BASE) {
l2srbar = CFG_SYS_INIT_L2_ADDR;
l2cache->l2srbar0 = l2srbar;
@@ -821,7 +821,7 @@ int cpu_init_r(void)
#ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
{
struct ccsr_usb_phy __iomem *usb_phy1 =
- (void *)CFG_SYS_MPC85xx_USB1_PHY_ADDR;
+ (void *)CFG_SYS_MPC85XX_USB1_PHY_ADDR;
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
if (has_erratum_a006261())
fsl_erratum_a006261_workaround(usb_phy1);
@@ -833,7 +833,7 @@ int cpu_init_r(void)
#ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
{
struct ccsr_usb_phy __iomem *usb_phy2 =
- (void *)CFG_SYS_MPC85xx_USB2_PHY_ADDR;
+ (void *)CFG_SYS_MPC85XX_USB2_PHY_ADDR;
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
if (has_erratum_a006261())
fsl_erratum_a006261_workaround(usb_phy2);
@@ -859,7 +859,7 @@ int cpu_init_r(void)
#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
struct ccsr_usb_phy __iomem *usb_phy =
- (void *)CFG_SYS_MPC85xx_USB1_PHY_ADDR;
+ (void *)CFG_SYS_MPC85XX_USB1_PHY_ADDR;
setbits_be32(&usb_phy->pllprg[1],
CFG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
CFG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
@@ -928,11 +928,11 @@ int cpu_init_r(void)
fsl_sata_reg_t *reg;
/* first SATA controller */
- reg = (void *)CFG_SYS_MPC85xx_SATA1_ADDR;
+ reg = (void *)CFG_SYS_MPC85XX_SATA1_ADDR;
clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
/* second SATA controller */
- reg = (void *)CFG_SYS_MPC85xx_SATA2_ADDR;
+ reg = (void *)CFG_SYS_MPC85XX_SATA2_ADDR;
clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
}
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index a67f37e3af9..de9dc2e77ea 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -85,10 +85,10 @@ void cpu_init_early_f(void *fdt)
{
u32 mas0, mas1, mas2, mas3, mas7;
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#endif
#ifdef CONFIG_A003399_NOR_WORKAROUND
- ccsr_l2cache_t *l2cache = (void *)CFG_SYS_MPC85xx_L2_ADDR;
+ ccsr_l2cache_t *l2cache = (void *)CFG_SYS_MPC85XX_L2_ADDR;
u32 *dst, *src;
void (*setup_ifc_sram)(void);
int i;
@@ -121,7 +121,7 @@ void cpu_init_early_f(void *fdt)
* Hence specifically selecting CS3.
*/
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
- setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_LCLK_IFC_CS3);
+ setbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_LCLK_IFC_CS3);
#endif
#ifdef CONFIG_FSL_LAW
@@ -147,10 +147,10 @@ void cpu_init_early_f(void *fdt)
out_be32(&l2cache->l2srbar0, SRAM_BASE_ADDR);
out_be32(&l2cache->l2errdis,
- (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC));
+ (MPC85XX_L2ERRDIS_MBECC | MPC85XX_L2ERRDIS_SBECC));
out_be32(&l2cache->l2ctl,
- (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ (MPC85XX_L2CTL_L2E | MPC85XX_L2CTL_L2SRAM_ENTIRE));
/*
* Copy the code in setup_ifc to L2SRAM. Do a word copy
@@ -170,8 +170,8 @@ void cpu_init_early_f(void *fdt)
/* CLEANUP */
clrbits_be32(&l2cache->l2ctl,
- (MPC85xx_L2CTL_L2E |
- MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ (MPC85XX_L2CTL_L2E |
+ MPC85XX_L2CTL_L2SRAM_ENTIRE));
out_be32(&l2cache->l2srbar0, 0x0);
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index e26436bf570..6bc5afe1126 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -220,7 +220,7 @@ static inline void ft_fixup_l2cache_compatible(void *blob, int off)
/* return size in kilobytes */
static inline u32 l2cache_size(void)
{
- volatile ccsr_l2cache_t *l2cache = (void *)CFG_SYS_MPC85xx_L2_ADDR;
+ volatile ccsr_l2cache_t *l2cache = (void *)CFG_SYS_MPC85XX_L2_ADDR;
volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
u32 ver = SVR_SOC_VER(get_svr());
@@ -507,7 +507,7 @@ static void ft_fixup_qe_snum(void *blob)
#if defined(CONFIG_ARCH_P4080)
static void fdt_fixup_usb(void *fdt)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
int off;
@@ -530,7 +530,7 @@ void fdt_fixup_dma3(void *blob)
{
/* the 3rd DMA is not functional if SRIO2 is chosen */
int nodeoff;
- ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#define CFG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300)
#if defined(CONFIG_ARCH_T2080)
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index 9b6577e547e..0862a1c51fe 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -122,7 +122,7 @@ int is_serdes_configured(enum srds_prtcl device)
int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
{
- const ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ const ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 cfg = in_be32(&gur->rcwsr[4]);
int i;
@@ -193,7 +193,7 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 cfg;
int lane;
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 7c2de02c4c5..95f2515390f 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -108,7 +108,7 @@ int serdes_get_bank_by_lane(int lane)
int serdes_lane_enabled(int lane)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
serdes_corenet_t *regs = (void *)CFG_SYS_FSL_CORENET_SERDES_ADDR;
int bank = lanes[lane].bank;
@@ -133,7 +133,7 @@ int serdes_lane_enabled(int lane)
int is_serdes_configured(enum srds_prtcl device)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
/* Is serdes enabled at all? */
if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN))
@@ -169,7 +169,7 @@ int serdes_get_first_lane(enum srds_prtcl device)
u32 prtcl;
const ccsr_gur_t *gur;
- gur = (typeof(gur))CFG_SYS_MPC85xx_GUTS_ADDR;
+ gur = (typeof(gur))CFG_SYS_MPC85XX_GUTS_ADDR;
/* Is serdes enabled at all? */
if (unlikely((in_be32(&gur->rcwsr[5]) & 0x2000) == 0))
@@ -251,7 +251,7 @@ void serdes_reset_rx(enum srds_prtcl device)
if (unlikely(device == NONE))
return;
- gur = (typeof(gur))CFG_SYS_MPC85xx_GUTS_ADDR;
+ gur = (typeof(gur))CFG_SYS_MPC85XX_GUTS_ADDR;
/* Is serdes enabled at all? */
if (unlikely((in_be32(&gur->rcwsr[5]) & 0x2000) == 0))
@@ -491,7 +491,7 @@ void soc_serdes_init(void) __attribute__((weak, alias("__soc_serdes_init")));
void fsl_serdes_init(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
int cfg;
serdes_corenet_t *srds_regs;
#ifdef CONFIG_ARCH_P5040
diff --git a/arch/powerpc/cpu/mpc85xx/interrupts.c b/arch/powerpc/cpu/mpc85xx/interrupts.c
index bcbdfac0279..0fe83e80024 100644
--- a/arch/powerpc/cpu/mpc85xx/interrupts.c
+++ b/arch/powerpc/cpu/mpc85xx/interrupts.c
@@ -6,7 +6,7 @@
* (C) Copyright 2002 (440 port)
* Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
*
- * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
+ * (C) Copyright 2003 Motorola Inc. (MPC85XX port)
* Xianghua Xiao (X.Xiao@motorola.com)
*/
@@ -36,10 +36,10 @@ void interrupt_init_cpu(unsigned *decrementer_count)
ulong post_word = post_word_load();
#endif
- out_be32(&pic->gcr, MPC85xx_PICGCR_RST);
- while (in_be32(&pic->gcr) & MPC85xx_PICGCR_RST)
+ out_be32(&pic->gcr, MPC85XX_PICGCR_RST);
+ while (in_be32(&pic->gcr) & MPC85XX_PICGCR_RST)
;
- out_be32(&pic->gcr, MPC85xx_PICGCR_M);
+ out_be32(&pic->gcr, MPC85XX_PICGCR_M);
in_be32(&pic->gcr);
*decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 7c47e415f05..3f159cc9d69 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -87,7 +87,7 @@ int cpu_status(u32 nr)
#ifdef CONFIG_FSL_CORENET
int cpu_disable(u32 nr)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
setbits_be32(&gur->coredisrl, 1 << nr);
@@ -95,7 +95,7 @@ int cpu_disable(u32 nr)
}
int is_core_disabled(int nr) {
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 coredisrl = in_be32(&gur->coredisrl);
return (coredisrl & (1 << nr));
@@ -103,14 +103,14 @@ int is_core_disabled(int nr) {
#else
int cpu_disable(u32 nr)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
switch (nr) {
case 0:
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU0);
+ setbits_be32(&gur->devdisr, MPC85XX_DEVDISR_CPU0);
break;
case 1:
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU1);
+ setbits_be32(&gur->devdisr, MPC85XX_DEVDISR_CPU1);
break;
default:
printf("Invalid cpu number for disable %d\n", nr);
@@ -121,14 +121,14 @@ int cpu_disable(u32 nr)
}
int is_core_disabled(int nr) {
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 devdisr = in_be32(&gur->devdisr);
switch (nr) {
case 0:
- return (devdisr & MPC85xx_DEVDISR_CPU0);
+ return (devdisr & MPC85XX_DEVDISR_CPU0);
case 1:
- return (devdisr & MPC85xx_DEVDISR_CPU1);
+ return (devdisr & MPC85XX_DEVDISR_CPU1);
default:
printf("Invalid cpu number for disable %d\n", nr);
}
@@ -264,7 +264,7 @@ static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
u32 mask = cpu_mask();
struct law_entry e;
- gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
ccm = (void *)(CFG_SYS_FSL_CORENET_CCM_ADDR);
rcpm = (void *)(CFG_SYS_FSL_CORENET_RCPM_ADDR);
pic = (void *)(CFG_SYS_MPC8xxx_PIC_ADDR);
@@ -336,8 +336,8 @@ static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
u32 up, cpu_up_mask, whoami;
u32 *table = (u32 *)&__spin_table;
volatile u32 bpcr;
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_SYS_MPC85xx_ECM_ADDR);
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CFG_SYS_MPC85XX_ECM_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
volatile ccsr_pic_t *pic = (void *)(CFG_SYS_MPC8xxx_PIC_ADDR);
u32 devdisr;
int timeout = 10;
@@ -348,9 +348,9 @@ static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
/* disable time base at the platform */
devdisr = in_be32(&gur->devdisr);
if (whoami)
- devdisr |= MPC85xx_DEVDISR_TB0;
+ devdisr |= MPC85XX_DEVDISR_TB0;
else
- devdisr |= MPC85xx_DEVDISR_TB1;
+ devdisr |= MPC85XX_DEVDISR_TB1;
out_be32(&gur->devdisr, devdisr);
/* release the hounds */
@@ -382,9 +382,9 @@ static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
/* enable time base at the platform */
if (whoami)
- devdisr |= MPC85xx_DEVDISR_TB1;
+ devdisr |= MPC85XX_DEVDISR_TB1;
else
- devdisr |= MPC85xx_DEVDISR_TB0;
+ devdisr |= MPC85XX_DEVDISR_TB0;
out_be32(&gur->devdisr, devdisr);
/* readback to sync write */
@@ -393,7 +393,7 @@ static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
mtspr(SPRN_TBWU, 0);
mtspr(SPRN_TBWL, 0);
- devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1);
+ devdisr &= ~(MPC85XX_DEVDISR_TB0 | MPC85XX_DEVDISR_TB1);
out_be32(&gur->devdisr, devdisr);
#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
index cbcb57fe3a5..2c45872f075 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
@@ -89,8 +89,8 @@ int is_serdes_configured(enum srds_prtcl device)
void fsl_serdes_init(void)
{
- void *guts = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
- void *sd = (void *)CFG_SYS_MPC85xx_SERDES2_ADDR;
+ void *guts = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
+ void *sd = (void *)CFG_SYS_MPC85XX_SERDES2_ADDR;
u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS);
u32 srds1_io_sel, srds2_io_sel;
u32 tmp;
@@ -100,8 +100,8 @@ void fsl_serdes_init(void)
serdes2_prtcl_map & (1 << NONE))
return;
- srds1_io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ srds1_io_sel = (pordevsr & MPC85XX_PORDEVSR_IO_SEL) >>
+ MPC85XX_PORDEVSR_IO_SEL_SHIFT;
/* parse the SRDS2_IO_SEL of PORDEVSR */
srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL)
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c
index a48f3c15128..21128ccdbeb 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c
@@ -52,10 +52,10 @@ int is_serdes_configured(enum srds_prtcl device)
void fsl_serdes_init(void)
{
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ u32 srds_cfg = (pordevsr & MPC85XX_PORDEVSR_IO_SEL) >>
+ MPC85XX_PORDEVSR_IO_SEL_SHIFT;
int lane;
if (serdes1_prtcl_map & (1 << NONE) &&
@@ -86,10 +86,10 @@ void fsl_serdes_init(void)
serdes2_prtcl_map |= (1 << lane_prtcl);
}
- if (pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)
+ if (pordevsr & MPC85XX_PORDEVSR_SGMII1_DIS)
serdes2_prtcl_map &= ~(1 << SGMII_TSEC1);
- if (pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)
+ if (pordevsr & MPC85XX_PORDEVSR_SGMII3_DIS)
serdes2_prtcl_map &= ~(1 << SGMII_TSEC3);
/* Set the first bit to indicate serdes has been initialized */
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c
index 479ee085d3a..950ca9f957e 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c
@@ -32,10 +32,10 @@ int is_serdes_configured(enum srds_prtcl prtcl)
void fsl_serdes_init(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds1_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ u32 srds1_cfg = (pordevsr & MPC85XX_PORDEVSR_IO_SEL) >>
+ MPC85XX_PORDEVSR_IO_SEL_SHIFT;
int lane;
if (serdes1_prtcl_map & (1 << NONE))
diff --git a/arch/powerpc/cpu/mpc85xx/p1010_serdes.c b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c
index 56e5ef6468c..51a57a52523 100644
--- a/arch/powerpc/cpu/mpc85xx/p1010_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c
@@ -51,10 +51,10 @@ int is_serdes_configured(enum srds_prtcl device)
void fsl_serdes_init(void)
{
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ u32 srds_cfg = (pordevsr & MPC85XX_PORDEVSR_IO_SEL) >>
+ MPC85XX_PORDEVSR_IO_SEL_SHIFT;
int lane;
if (serdes1_prtcl_map & (1 << NONE) &&
diff --git a/arch/powerpc/cpu/mpc85xx/p1021_serdes.c b/arch/powerpc/cpu/mpc85xx/p1021_serdes.c
index 47f13e3c1cd..6dce81afa05 100644
--- a/arch/powerpc/cpu/mpc85xx/p1021_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p1021_serdes.c
@@ -50,12 +50,12 @@ int is_serdes_configured(enum srds_prtcl prtcl)
void fsl_serdes_init(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
- serdes_85xx_t *serdes = (void *)CFG_SYS_MPC85xx_SERDES1_ADDR;
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
+ serdes_85xx_t *serdes = (void *)CFG_SYS_MPC85XX_SERDES1_ADDR;
u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ u32 srds_cfg = (pordevsr & MPC85XX_PORDEVSR_IO_SEL) >>
+ MPC85XX_PORDEVSR_IO_SEL_SHIFT;
int lane;
u32 mask, val;
diff --git a/arch/powerpc/cpu/mpc85xx/p1023_serdes.c b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c
index 7a8f653727e..191573f79d6 100644
--- a/arch/powerpc/cpu/mpc85xx/p1023_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c
@@ -35,10 +35,10 @@ int is_serdes_configured(enum srds_prtcl device)
void fsl_serdes_init(void)
{
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ u32 srds_cfg = (pordevsr & MPC85XX_PORDEVSR_IO_SEL) >>
+ MPC85XX_PORDEVSR_IO_SEL_SHIFT;
int lane;
if (serdes1_prtcl_map & (1 << NONE))
diff --git a/arch/powerpc/cpu/mpc85xx/p2020_serdes.c b/arch/powerpc/cpu/mpc85xx/p2020_serdes.c
index 8c5d82ae8ad..dfaa4850e6d 100644
--- a/arch/powerpc/cpu/mpc85xx/p2020_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p2020_serdes.c
@@ -40,10 +40,10 @@ int is_serdes_configured(enum srds_prtcl prtcl)
void fsl_serdes_init(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ u32 srds_cfg = (pordevsr & MPC85XX_PORDEVSR_IO_SEL) >>
+ MPC85XX_PORDEVSR_IO_SEL_SHIFT;
int lane;
if (serdes1_prtcl_map & (1 << NONE))
diff --git a/arch/powerpc/cpu/mpc85xx/qe_io.c b/arch/powerpc/cpu/mpc85xx/qe_io.c
index 3cf41ca76d5..3fb80441d99 100644
--- a/arch/powerpc/cpu/mpc85xx/qe_io.c
+++ b/arch/powerpc/cpu/mpc85xx/qe_io.c
@@ -20,7 +20,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
u32 pin_2bit_assign;
u32 pin_1bit_mask;
u32 tmp_val;
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
volatile par_io_t *par_io = (volatile par_io_t *)
&(gur->qe_par_io);
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 9af40310b46..eb1ff3dbc10 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -24,7 +24,7 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info(sys_info_t *sys_info)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#ifdef CONFIG_FSL_CORENET
volatile ccsr_clk_t *clk = (void *)(CFG_SYS_FSL_CORENET_CLK_ADDR);
unsigned int cpu;
@@ -537,8 +537,8 @@ void get_sys_info(sys_info_t *sys_info)
#if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ)
{
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85XX_PORPLLSR_DDR_RATIO)
+ >> MPC85XX_PORPLLSR_DDR_RATIO_SHIFT;
if (ddr_ratio != 0x7)
sys_info->freq_ddrbus = ddr_ratio * get_board_ddr_clk();
}
@@ -548,8 +548,8 @@ void get_sys_info(sys_info_t *sys_info)
#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
sys_info->freq_qe = sys_info->freq_systembus;
#else
- qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
- >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
+ qe_ratio = ((gur->porpllsr) & MPC85XX_PORPLLSR_QE_RATIO)
+ >> MPC85XX_PORPLLSR_QE_RATIO_SHIFT;
sys_info->freq_qe = qe_ratio * get_board_sys_clk();
#endif
#endif
@@ -575,7 +575,7 @@ int get_clocks(void)
{
sys_info_t sys_info;
#ifdef CONFIG_ARCH_MPC8544
- volatile ccsr_gur_t *gur = (void *) CFG_SYS_MPC85xx_GUTS_ADDR;
+ volatile ccsr_gur_t *gur = (void *) CFG_SYS_MPC85XX_GUTS_ADDR;
#endif
get_sys_info (&sys_info);
gd->cpu_clk = sys_info.freq_processor[0];
@@ -604,7 +604,7 @@ int get_clocks(void)
* 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
* PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
*/
- if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
+ if (gur->pordevsr2 & MPC85XX_PORDEVSR2_SEC_CFG)
gd->arch.i2c1_clk = sys_info.freq_systembus / 3;
else
gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
index ce2b9c21667..8bf0350bdb6 100644
--- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c
+++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
@@ -15,17 +15,17 @@ DECLARE_GLOBAL_DATA_PTR;
ulong cpu_init_f(void)
{
#ifdef CFG_SYS_INIT_L2_ADDR
- ccsr_l2cache_t *l2cache = (void *)CFG_SYS_MPC85xx_L2_ADDR;
+ ccsr_l2cache_t *l2cache = (void *)CFG_SYS_MPC85XX_L2_ADDR;
out_be32(&l2cache->l2srbar0, CFG_SYS_INIT_L2_ADDR);
/* set MBECCDIS=1, SBECCDIS=1 */
out_be32(&l2cache->l2errdis,
- (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC));
+ (MPC85XX_L2ERRDIS_MBECC | MPC85XX_L2ERRDIS_SBECC));
/* set L2E=1 & L2SRAM=001 */
out_be32(&l2cache->l2ctl,
- (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ (MPC85XX_L2CTL_L2E | MPC85XX_L2CTL_L2SRAM_ENTIRE));
#endif
return 0;
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 562b6993b9d..21ad14aef35 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -80,17 +80,17 @@
/* Definitions from C header file asm/immap_85xx.h */
-#define CFG_SYS_MPC85xx_L2_OFFSET 0x20000
+#define CFG_SYS_MPC85XX_L2_OFFSET 0x20000
-#define MPC85xx_L2CTL 0x000
-#define MPC85xx_L2CTL_L2E 0x80000000
-#define MPC85xx_L2CTL_L2SRAM_ENTIRE 0x00010000
+#define MPC85XX_L2CTL 0x000
+#define MPC85XX_L2CTL_L2E 0x80000000
+#define MPC85XX_L2CTL_L2SRAM_ENTIRE 0x00010000
-#define MPC85xx_L2SRBAR0 0x100
+#define MPC85XX_L2SRBAR0 0x100
-#define MPC85xx_L2ERRDIS 0xe44
-#define MPC85xx_L2ERRDIS_MBECC 0x00000008
-#define MPC85xx_L2ERRDIS_SBECC 0x00000004
+#define MPC85XX_L2ERRDIS 0xe44
+#define MPC85XX_L2ERRDIS_MBECC 0x00000008
+#define MPC85XX_L2ERRDIS_SBECC 0x00000004
/* Definitions from C header file fsl_esdhc.h */
@@ -127,14 +127,14 @@ bootsect:
.org 0x80 /* Start of configuration */
.Lconf_pair_start:
- .long CONFIG_SYS_CCSRBAR_DEFAULT + CFG_SYS_MPC85xx_L2_OFFSET + MPC85xx_L2SRBAR0 /* Address: L2 memory-mapped SRAM base addr 0 */
+ .long CONFIG_SYS_CCSRBAR_DEFAULT + CFG_SYS_MPC85XX_L2_OFFSET + MPC85XX_L2SRBAR0 /* Address: L2 memory-mapped SRAM base addr 0 */
.long CFG_SYS_INIT_L2_ADDR
- .long CONFIG_SYS_CCSRBAR_DEFAULT + CFG_SYS_MPC85xx_L2_OFFSET + MPC85xx_L2ERRDIS /* Address: L2 cache error disable */
- .long MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC
+ .long CONFIG_SYS_CCSRBAR_DEFAULT + CFG_SYS_MPC85XX_L2_OFFSET + MPC85XX_L2ERRDIS /* Address: L2 cache error disable */
+ .long MPC85XX_L2ERRDIS_MBECC | MPC85XX_L2ERRDIS_SBECC
- .long CONFIG_SYS_CCSRBAR_DEFAULT + CFG_SYS_MPC85xx_L2_OFFSET + MPC85xx_L2CTL /* Address: L2 configuration 0 */
- .long MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE
+ .long CONFIG_SYS_CCSRBAR_DEFAULT + CFG_SYS_MPC85XX_L2_OFFSET + MPC85XX_L2CTL /* Address: L2 configuration 0 */
+ .long MPC85XX_L2CTL_L2E | MPC85XX_L2CTL_L2SRAM_ENTIRE
.long CONFIG_SYS_CCSRBAR_DEFAULT + ESDHCCTL /* Address: eSDHC DMA control */
.long ESDHCCTL_SNOOP
@@ -1325,7 +1325,7 @@ ProgramCheck:
EXC_XFER_TEMPLATE(0x700, ProgramCheck, ProgramCheckException,
MSR_KERNEL, COPY_EE)
- /* No FPU on MPC85xx. This exception is not supposed to happen.
+ /* No FPU on MPC85XX. This exception is not supposed to happen.
*/
STD_EXCEPTION(0x0800, FPUnavailable, UnknownException)
STD_EXCEPTION(0x0900, SystemCall, UnknownException)
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index e3a536d4f8c..abcde571ac2 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -17,7 +17,7 @@ ifdef MINIMAL
obj-$(CONFIG_FSL_LAW) += law.o
else
-obj-$(CONFIG_MPC85xx) += cpu.o
+obj-$(CONFIG_MPC85XX) += cpu.o
obj-$(CONFIG_MPC86xx) += cpu.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 73d28f2a4e2..d4a91622d34 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -24,7 +24,7 @@
DECLARE_GLOBAL_DATA_PTR;
static struct cpu_type cpu_type_list[] = {
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85XX)
CPU_TYPE_ENTRY(8533, 8533, 1),
CPU_TYPE_ENTRY(8535, 8535, 1),
CPU_TYPE_ENTRY(8536, 8536, 1),
@@ -104,7 +104,7 @@ static struct cpu_type cpu_type_list[] = {
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
static inline u32 init_type(u32 cluster, int init_id)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
u32 type = in_be32(&gur->tp_ityp[idx]);
@@ -116,7 +116,7 @@ static inline u32 init_type(u32 cluster, int init_id)
u32 compute_ppc_cpumask(void)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
int i = 0, count = 0;
u32 cluster, type, mask = 0;
@@ -140,7 +140,7 @@ u32 compute_ppc_cpumask(void)
#ifdef CONFIG_HETROGENOUS_CLUSTERS
u32 compute_dsp_cpumask(void)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
int i = CONFIG_DSP_CLUSTER_START, count = 0;
u32 cluster, type, dsp_mask = 0;
@@ -163,7 +163,7 @@ u32 compute_dsp_cpumask(void)
int fsl_qoriq_dsp_core_to_cluster(unsigned int core)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
int count = 0, i = CONFIG_DSP_CLUSTER_START;
u32 cluster;
@@ -186,7 +186,7 @@ int fsl_qoriq_dsp_core_to_cluster(unsigned int core)
int fsl_qoriq_core_to_cluster(unsigned int core)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
int i = 0, count = 0;
u32 cluster;
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 30042902487..6055f986b8b 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -17,7 +17,7 @@
#include <phy.h>
#include <hwconfig.h>
-#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx))
static int ft_del_cpuhandle(void *blob, int cpuhandle)
{
int off, ret = -FDT_ERR_NOTFOUND;
@@ -69,7 +69,7 @@ void ft_fixup_num_cores(void *blob) {
debug ("deleted %d extra core entry entries from device tree\n",
del_cores);
}
-#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
+#endif /* defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx) */
int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
index 7519b214969..7fae2befc35 100644
--- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
@@ -12,7 +12,7 @@
#include "../mpc83xx/elbc/elbc.h"
#endif
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
/* Boards should provide their own version of this if they use lbc sdram */
static void __lbc_sdram_init(void)
{
@@ -44,7 +44,7 @@ void init_early_memctl_regs(void)
clrsetbits_be32(&(LBC_BASE_ADDR)->lbcr, LBCR_BMT|LBCR_BMTPS, 0xf);
#endif
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
/* if cs1 is already set via debugger, leave cs0/cs1 alone */
if (get_lbc_br(1) & BR_V)
init_br1 = 0;
diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c
index 35409dc8824..b0183edb064 100644
--- a/arch/powerpc/cpu/mpc8xxx/law.c
+++ b/arch/powerpc/cpu/mpc8xxx/law.c
@@ -301,7 +301,7 @@ void init_laws(void)
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/* check RCW to get which port is used for boot */
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
u32 bootloc = in_be32(&gur->rcwsr[6]);
/*
* in SRIO or PCIE boot we need to set specail LAWs for
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index c0b4a1217d3..89ee4ea1ac2 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -33,12 +33,12 @@
#define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2
#endif
#define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU
- #define CFG_SYS_MPC8xxx_GUTS_ADDR CFG_SYS_MPC85xx_GUTS_ADDR
-#elif defined(CONFIG_MPC85xx)
- #define _DEVDISR_SRIO1 MPC85xx_DEVDISR_SRIO
- #define _DEVDISR_SRIO2 MPC85xx_DEVDISR_SRIO
- #define _DEVDISR_RMU MPC85xx_DEVDISR_RMSG
- #define CFG_SYS_MPC8xxx_GUTS_ADDR CFG_SYS_MPC85xx_GUTS_ADDR
+ #define CFG_SYS_MPC8xxx_GUTS_ADDR CFG_SYS_MPC85XX_GUTS_ADDR
+#elif defined(CONFIG_MPC85XX)
+ #define _DEVDISR_SRIO1 MPC85XX_DEVDISR_SRIO
+ #define _DEVDISR_SRIO2 MPC85XX_DEVDISR_SRIO
+ #define _DEVDISR_RMU MPC85XX_DEVDISR_RMSG
+ #define CFG_SYS_MPC8xxx_GUTS_ADDR CFG_SYS_MPC85XX_GUTS_ADDR
#elif defined(CONFIG_MPC86xx)
#define _DEVDISR_SRIO1 MPC86xx_DEVDISR_SRIO
#define _DEVDISR_SRIO2 MPC86xx_DEVDISR_SRIO
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index f0702cab143..3d411eb8661 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -6,7 +6,7 @@
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
#include <asm/config_mpc85xx.h>
#endif
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index d990ecff96f..ae95d089cdd 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -3,10 +3,10 @@
* Copyright 2011-2012 Freescale Semiconductor, Inc.
*/
-#ifndef _ASM_MPC85xx_CONFIG_H_
-#define _ASM_MPC85xx_CONFIG_H_
+#ifndef _ASM_MPC85XX_CONFIG_H_
+#define _ASM_MPC85XX_CONFIG_H_
-/* SoC specific defines for Freescale MPC85xx (PQ3) and QorIQ processors */
+/* SoC specific defines for Freescale MPC85XX (PQ3) and QorIQ processors */
#include <fsl_ddrc_version.h>
@@ -174,4 +174,4 @@
#endif
-#endif /* _ASM_MPC85xx_CONFIG_H_ */
+#endif /* _ASM_MPC85XX_CONFIG_H_ */
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 8d681a1cba6..3808b2b4bf4 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -9,7 +9,7 @@
#include <config.h>
#include <common.h>
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
void lbc_sdram_init(void);
#endif
@@ -48,7 +48,7 @@ void lbc_sdram_init(void);
#endif
#if defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC8360)
#define BR_MS_SDRAM 0x00000060 /* SDRAM */
-#elif defined(CONFIG_MPC85xx)
+#elif defined(CONFIG_MPC85XX)
#define BR_MS_SDRAM 0x00000000 /* SDRAM */
#endif
#define BR_MS_UPMA 0x00000080 /* UPMA */
diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h
index 0af3d8902ac..93c1dc4ccfe 100644
--- a/arch/powerpc/include/asm/fsl_liodn.h
+++ b/arch/powerpc/include/asm/fsl_liodn.h
@@ -18,15 +18,15 @@ struct srio_liodn_id_table {
#define SET_SRIO_LIODN_1(port, idA) \
{ .id = { idA }, .num_ids = 1, .portid = port, \
.reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
- + CFG_SYS_MPC85xx_GUTS_OFFSET + CFG_SYS_CCSRBAR, \
+ + CFG_SYS_MPC85XX_GUTS_OFFSET + CFG_SYS_CCSRBAR, \
}
#define SET_SRIO_LIODN_2(port, idA, idB) \
{ .id = { idA, idB }, .num_ids = 2, .portid = port, \
.reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
- + CFG_SYS_MPC85xx_GUTS_OFFSET + CFG_SYS_CCSRBAR, \
+ + CFG_SYS_MPC85XX_GUTS_OFFSET + CFG_SYS_CCSRBAR, \
.reg_offset[1] = offsetof(ccsr_gur_t, rio##port##maintliodnr) \
- + CFG_SYS_MPC85xx_GUTS_OFFSET + CFG_SYS_CCSRBAR, \
+ + CFG_SYS_MPC85XX_GUTS_OFFSET + CFG_SYS_CCSRBAR, \
}
#define SET_SRIO_LIODN_BASE(port, id_a) \
@@ -90,42 +90,42 @@ extern void fdt_fixup_liodn(void *blob);
#define SET_GUTS_LIODN(compat, liodn, name, compatoff) \
SET_LIODN_ENTRY_1(compat, liodn, \
- offsetof(ccsr_gur_t, name) + CFG_SYS_MPC85xx_GUTS_OFFSET, \
+ offsetof(ccsr_gur_t, name) + CFG_SYS_MPC85XX_GUTS_OFFSET, \
compatoff)
#define SET_USB_LIODN(usbNum, compat, liodn) \
SET_GUTS_LIODN(compat, liodn, usb##usbNum##liodnr,\
- CFG_SYS_MPC85xx_USB##usbNum##_OFFSET)
+ CFG_SYS_MPC85XX_USB##usbNum##_OFFSET)
#define SET_SATA_LIODN(sataNum, liodn) \
SET_GUTS_LIODN("fsl,pq-sata-v2", liodn, sata##sataNum##liodnr,\
- CFG_SYS_MPC85xx_SATA##sataNum##_OFFSET)
+ CFG_SYS_MPC85XX_SATA##sataNum##_OFFSET)
#define SET_PCI_LIODN(compat, pciNum, liodn) \
SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\
- CFG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
+ CFG_SYS_MPC85XX_PCIE##pciNum##_OFFSET)
#define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \
SET_LIODN_ENTRY_1(compat, liodn,\
- offsetof(ccsr_pcix_t, liodn_base) + CFG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\
- CFG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
+ offsetof(ccsr_pcix_t, liodn_base) + CFG_SYS_MPC85XX_PCIE##pciNum##_OFFSET,\
+ CFG_SYS_MPC85XX_PCIE##pciNum##_OFFSET)
/* reg nodes for DMA start @ 0x300 */
#define SET_DMA_LIODN(dmaNum, compat, liodn) \
SET_GUTS_LIODN(compat, liodn, dma##dmaNum##liodnr,\
- CFG_SYS_MPC85xx_DMA##dmaNum##_OFFSET + 0x300)
+ CFG_SYS_MPC85XX_DMA##dmaNum##_OFFSET + 0x300)
#define SET_SDHC_LIODN(sdhcNum, liodn) \
SET_GUTS_LIODN("fsl,esdhc", liodn, sdmmc##sdhcNum##liodnr,\
- CFG_SYS_MPC85xx_ESDHC_OFFSET)
+ CFG_SYS_MPC85XX_ESDHC_OFFSET)
#define SET_QE_LIODN(liodn) \
SET_GUTS_LIODN("fsl,qe", liodn, qeliodnr,\
- CFG_SYS_MPC85xx_QE_OFFSET)
+ CFG_SYS_MPC85XX_QE_OFFSET)
#define SET_TDM_LIODN(liodn) \
SET_GUTS_LIODN("fsl,tdm1.0", liodn, tdmliodnr,\
- CFG_SYS_MPC85xx_TDM_OFFSET)
+ CFG_SYS_MPC85XX_TDM_OFFSET)
#define SET_QMAN_LIODN(liodn) \
SET_LIODN_ENTRY_1("fsl,qman", liodn, \
diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h
index 809ab1d4187..c2f12d76521 100644
--- a/arch/powerpc/include/asm/fsl_pci.h
+++ b/arch/powerpc/include/asm/fsl_pci.h
@@ -241,7 +241,7 @@ int fsl_pcie_init_board(int busno);
FT_FSL_PCIE3_SETUP; \
FT_FSL_PCIE4_SETUP;
#define FT_FSL_PCIE_SETUP FT_FSL_PCI_SETUP
-#elif defined(CONFIG_MPC85xx)
+#elif defined(CONFIG_MPC85XX)
#define FSL_PCI_COMPAT "fsl,mpc8540-pci"
#ifdef CONFIG_SYS_FSL_PCIE_COMPAT
#define FSL_PCIE_COMPAT CONFIG_SYS_FSL_PCIE_COMPAT
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 2636cbbda88..404980c1f47 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -53,11 +53,11 @@ struct arch_global_data {
# endif /* CONFIG_ARCH_MPC8360 */
#endif
#endif
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
u32 lbc_clk;
void *cpu;
-#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
-#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || \
+#endif /* CONFIG_MPC85XX || CONFIG_MPC86xx */
+#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85XX) || \
defined(CONFIG_MPC86xx)
u32 i2c1_clk;
u32 i2c2_clk;
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 7293720fb3c..616aac5c666 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * MPC85xx Internal Memory Map
+ * MPC85XX Internal Memory Map
*
* Copyright 2007-2012 Freescale Semiconductor, Inc.
*
@@ -316,10 +316,10 @@ typedef struct ccsr_l2cache {
u8 res15[420];
} ccsr_l2cache_t;
-#define MPC85xx_L2CTL_L2E 0x80000000
-#define MPC85xx_L2CTL_L2SRAM_ENTIRE 0x00010000
-#define MPC85xx_L2ERRDIS_MBECC 0x00000008
-#define MPC85xx_L2ERRDIS_SBECC 0x00000004
+#define MPC85XX_L2CTL_L2E 0x80000000
+#define MPC85XX_L2CTL_L2SRAM_ENTIRE 0x00010000
+#define MPC85XX_L2ERRDIS_MBECC 0x00000008
+#define MPC85XX_L2ERRDIS_SBECC 0x00000004
/* DMA Registers */
typedef struct ccsr_dma {
@@ -638,8 +638,8 @@ typedef struct ccsr_pic {
u32 frr; /* Feature Reporting */
u8 res10[28];
u32 gcr; /* Global Configuration */
-#define MPC85xx_PICGCR_RST 0x80000000
-#define MPC85xx_PICGCR_M 0x20000000
+#define MPC85XX_PICGCR_RST 0x80000000
+#define MPC85XX_PICGCR_M 0x20000000
u8 res11[92];
u32 vir; /* Vendor Identification */
u8 res12[12];
@@ -1787,29 +1787,29 @@ typedef struct ccsr_rcpm {
typedef struct ccsr_gur {
u32 porpllsr; /* POR PLL ratio status */
#ifdef CONFIG_ARCH_MPC8536
-#define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000
-#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25
+#define MPC85XX_PORPLLSR_DDR_RATIO 0x3e000000
+#define MPC85XX_PORPLLSR_DDR_RATIO_SHIFT 25
#elif defined(CONFIG_ARCH_C29X)
-#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00
-#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \
- & MPC85xx_PORDEVSR2_DDR_SPD_0) \
- >> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT))
+#define MPC85XX_PORPLLSR_DDR_RATIO 0x00003f00
+#define MPC85XX_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \
+ & MPC85XX_PORDEVSR2_DDR_SPD_0) \
+ >> MPC85XX_PORDEVSR2_DDR_SPD_0_SHIFT))
#else
#if defined(CONFIG_ARCH_BSC9131) || defined(CONFIG_ARCH_BSC9132)
-#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00
+#define MPC85XX_PORPLLSR_DDR_RATIO 0x00003f00
#else
-#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00
+#define MPC85XX_PORPLLSR_DDR_RATIO 0x00003e00
#endif
-#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 9
+#define MPC85XX_PORPLLSR_DDR_RATIO_SHIFT 9
#endif
-#define MPC85xx_PORPLLSR_QE_RATIO 0x3e000000
-#define MPC85xx_PORPLLSR_QE_RATIO_SHIFT 25
-#define MPC85xx_PORPLLSR_PLAT_RATIO 0x0000003e
-#define MPC85xx_PORPLLSR_PLAT_RATIO_SHIFT 1
+#define MPC85XX_PORPLLSR_QE_RATIO 0x3e000000
+#define MPC85XX_PORPLLSR_QE_RATIO_SHIFT 25
+#define MPC85XX_PORPLLSR_PLAT_RATIO 0x0000003e
+#define MPC85XX_PORPLLSR_PLAT_RATIO_SHIFT 1
u32 porbmsr; /* POR boot mode status */
-#define MPC85xx_PORBMSR_HA 0x00070000
-#define MPC85xx_PORBMSR_HA_SHIFT 16
-#define MPC85xx_PORBMSR_ROMLOC_SHIFT 24
+#define MPC85XX_PORBMSR_HA 0x00070000
+#define MPC85XX_PORBMSR_HA_SHIFT 16
+#define MPC85XX_PORBMSR_ROMLOC_SHIFT 24
#define PORBMSR_ROMLOC_SPI 0x6
#define PORBMSR_ROMLOC_SDHC 0x7
#define PORBMSR_ROMLOC_NAND_2K 0x9
@@ -1817,58 +1817,58 @@ typedef struct ccsr_gur {
u32 porimpscr; /* POR I/O impedance status & control */
u32 pordevsr; /* POR I/O device status regsiter */
#if defined(CONFIG_ARCH_P1023)
-#define MPC85xx_PORDEVSR_SGMII1_DIS 0x10000000
-#define MPC85xx_PORDEVSR_SGMII2_DIS 0x08000000
-#define MPC85xx_PORDEVSR_TSEC1_PRTC 0x02000000
+#define MPC85XX_PORDEVSR_SGMII1_DIS 0x10000000
+#define MPC85XX_PORDEVSR_SGMII2_DIS 0x08000000
+#define MPC85XX_PORDEVSR_TSEC1_PRTC 0x02000000
#else
-#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
-#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
+#define MPC85XX_PORDEVSR_SGMII1_DIS 0x20000000
+#define MPC85XX_PORDEVSR_SGMII2_DIS 0x10000000
#endif
-#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
-#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
-#define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000
-#define MPC85xx_PORDEVSR_PCI1 0x00800000
+#define MPC85XX_PORDEVSR_SGMII3_DIS 0x08000000
+#define MPC85XX_PORDEVSR_SGMII4_DIS 0x04000000
+#define MPC85XX_PORDEVSR_SRDS2_IO_SEL 0x38000000
+#define MPC85XX_PORDEVSR_PCI1 0x00800000
#if defined(CONFIG_ARCH_P1023)
-#define MPC85xx_PORDEVSR_IO_SEL 0x00600000
-#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21
+#define MPC85XX_PORDEVSR_IO_SEL 0x00600000
+#define MPC85XX_PORDEVSR_IO_SEL_SHIFT 21
#else
#if defined(CONFIG_ARCH_P1010)
-#define MPC85xx_PORDEVSR_IO_SEL 0x00600000
-#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21
+#define MPC85XX_PORDEVSR_IO_SEL 0x00600000
+#define MPC85XX_PORDEVSR_IO_SEL_SHIFT 21
#elif defined(CONFIG_ARCH_BSC9132)
-#define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000
-#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17
+#define MPC85XX_PORDEVSR_IO_SEL 0x00FE0000
+#define MPC85XX_PORDEVSR_IO_SEL_SHIFT 17
#elif defined(CONFIG_ARCH_C29X)
-#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000
-#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21
+#define MPC85XX_PORDEVSR_IO_SEL 0x00e00000
+#define MPC85XX_PORDEVSR_IO_SEL_SHIFT 21
#else
-#define MPC85xx_PORDEVSR_IO_SEL 0x00780000
-#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19
+#define MPC85XX_PORDEVSR_IO_SEL 0x00780000
+#define MPC85XX_PORDEVSR_IO_SEL_SHIFT 19
#endif /* if defined(CONFIG_ARCH_P1010) */
#endif
-#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
-#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
-#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
-#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
-#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
-#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
-#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
-#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
+#define MPC85XX_PORDEVSR_PCI2_ARB 0x00040000
+#define MPC85XX_PORDEVSR_PCI1_ARB 0x00020000
+#define MPC85XX_PORDEVSR_PCI1_PCI32 0x00010000
+#define MPC85XX_PORDEVSR_PCI1_SPD 0x00008000
+#define MPC85XX_PORDEVSR_PCI2_SPD 0x00004000
+#define MPC85XX_PORDEVSR_DRAM_RTYPE 0x00000060
+#define MPC85XX_PORDEVSR_RIO_CTLS 0x00000008
+#define MPC85XX_PORDEVSR_RIO_DEV_ID 0x00000007
u32 pordbgmsr; /* POR debug mode status */
u32 pordevsr2; /* POR I/O device status 2 */
#if defined(CONFIG_ARCH_C29X)
-#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008
-#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3
+#define MPC85XX_PORDEVSR2_DDR_SPD_0 0x00000008
+#define MPC85XX_PORDEVSR2_DDR_SPD_0_SHIFT 3
#endif
-#define MPC85xx_PORDEVSR2_SBC_MASK 0x10000000
+#define MPC85XX_PORDEVSR2_SBC_MASK 0x10000000
/* The 8544 RM says this is bit 26, but it's really bit 24 */
-#define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080
+#define MPC85XX_PORDEVSR2_SEC_CFG 0x00000080
u8 res1[8];
u32 gpporcr; /* General-purpose POR configuration */
u8 res2[12];
#if defined(CONFIG_ARCH_MPC8536)
u32 gencfgr; /* General Configuration Register */
-#define MPC85xx_GENCFGR_SDHC_WP_INV 0x20000000
+#define MPC85XX_GENCFGR_SDHC_WP_INV 0x20000000
#else
u32 gpiocr; /* GPIO control */
#endif
@@ -1879,248 +1879,248 @@ typedef struct ccsr_gur {
u8 res5[12];
u32 pmuxcr; /* Alt. function signal multiplex control */
#if defined(CONFIG_ARCH_P1010)
-#define MPC85xx_PMUXCR_TSEC1_0_1588 0x40000000
-#define MPC85xx_PMUXCR_TSEC1_0_RES 0xC0000000
-#define MPC85xx_PMUXCR_TSEC1_1_1588_TRIG 0x10000000
-#define MPC85xx_PMUXCR_TSEC1_1_GPIO_12 0x20000000
-#define MPC85xx_PMUXCR_TSEC1_1_RES 0x30000000
-#define MPC85xx_PMUXCR_TSEC1_2_DMA 0x04000000
-#define MPC85xx_PMUXCR_TSEC1_2_GPIO 0x08000000
-#define MPC85xx_PMUXCR_TSEC1_2_RES 0x0C000000
-#define MPC85xx_PMUXCR_TSEC1_3_RES 0x01000000
-#define MPC85xx_PMUXCR_TSEC1_3_GPIO_15 0x02000000
-#define MPC85xx_PMUXCR_IFC_ADDR16_SDHC 0x00400000
-#define MPC85xx_PMUXCR_IFC_ADDR16_USB 0x00800000
-#define MPC85xx_PMUXCR_IFC_ADDR16_IFC_CS2 0x00C00000
-#define MPC85xx_PMUXCR_IFC_ADDR17_18_SDHC 0x00100000
-#define MPC85xx_PMUXCR_IFC_ADDR17_18_USB 0x00200000
-#define MPC85xx_PMUXCR_IFC_ADDR17_18_DMA 0x00300000
-#define MPC85xx_PMUXCR_IFC_ADDR19_SDHC_DATA 0x00040000
-#define MPC85xx_PMUXCR_IFC_ADDR19_USB 0x00080000
-#define MPC85xx_PMUXCR_IFC_ADDR19_DMA 0x000C0000
-#define MPC85xx_PMUXCR_IFC_ADDR20_21_SDHC_DATA 0x00010000
-#define MPC85xx_PMUXCR_IFC_ADDR20_21_USB 0x00020000
-#define MPC85xx_PMUXCR_IFC_ADDR20_21_RES 0x00030000
-#define MPC85xx_PMUXCR_IFC_ADDR22_SDHC 0x00004000
-#define MPC85xx_PMUXCR_IFC_ADDR22_USB 0x00008000
-#define MPC85xx_PMUXCR_IFC_ADDR22_RES 0x0000C000
-#define MPC85xx_PMUXCR_IFC_ADDR23_SDHC 0x00001000
-#define MPC85xx_PMUXCR_IFC_ADDR23_USB 0x00002000
-#define MPC85xx_PMUXCR_IFC_ADDR23_RES 0x00003000
-#define MPC85xx_PMUXCR_IFC_ADDR24_SDHC 0x00000400
-#define MPC85xx_PMUXCR_IFC_ADDR24_USB 0x00000800
-#define MPC85xx_PMUXCR_IFC_ADDR24_RES 0x00000C00
-#define MPC85xx_PMUXCR_IFC_PAR_PERR_RES 0x00000300
-#define MPC85xx_PMUXCR_IFC_PAR_PERR_USB 0x00000200
-#define MPC85xx_PMUXCR_LCLK_RES 0x00000040
-#define MPC85xx_PMUXCR_LCLK_USB 0x00000080
-#define MPC85xx_PMUXCR_LCLK_IFC_CS3 0x000000C0
-#define MPC85xx_PMUXCR_SPI_RES 0x00000030
-#define MPC85xx_PMUXCR_SPI_GPIO 0x00000020
-#define MPC85xx_PMUXCR_CAN1_UART 0x00000004
-#define MPC85xx_PMUXCR_CAN1_TDM 0x00000008
-#define MPC85xx_PMUXCR_CAN1_RES 0x0000000C
-#define MPC85xx_PMUXCR_CAN2_UART 0x00000001
-#define MPC85xx_PMUXCR_CAN2_TDM 0x00000002
-#define MPC85xx_PMUXCR_CAN2_RES 0x00000003
+#define MPC85XX_PMUXCR_TSEC1_0_1588 0x40000000
+#define MPC85XX_PMUXCR_TSEC1_0_RES 0xC0000000
+#define MPC85XX_PMUXCR_TSEC1_1_1588_TRIG 0x10000000
+#define MPC85XX_PMUXCR_TSEC1_1_GPIO_12 0x20000000
+#define MPC85XX_PMUXCR_TSEC1_1_RES 0x30000000
+#define MPC85XX_PMUXCR_TSEC1_2_DMA 0x04000000
+#define MPC85XX_PMUXCR_TSEC1_2_GPIO 0x08000000
+#define MPC85XX_PMUXCR_TSEC1_2_RES 0x0C000000
+#define MPC85XX_PMUXCR_TSEC1_3_RES 0x01000000
+#define MPC85XX_PMUXCR_TSEC1_3_GPIO_15 0x02000000
+#define MPC85XX_PMUXCR_IFC_ADDR16_SDHC 0x00400000
+#define MPC85XX_PMUXCR_IFC_ADDR16_USB 0x00800000
+#define MPC85XX_PMUXCR_IFC_ADDR16_IFC_CS2 0x00C00000
+#define MPC85XX_PMUXCR_IFC_ADDR17_18_SDHC 0x00100000
+#define MPC85XX_PMUXCR_IFC_ADDR17_18_USB 0x00200000
+#define MPC85XX_PMUXCR_IFC_ADDR17_18_DMA 0x00300000
+#define MPC85XX_PMUXCR_IFC_ADDR19_SDHC_DATA 0x00040000
+#define MPC85XX_PMUXCR_IFC_ADDR19_USB 0x00080000
+#define MPC85XX_PMUXCR_IFC_ADDR19_DMA 0x000C0000
+#define MPC85XX_PMUXCR_IFC_ADDR20_21_SDHC_DATA 0x00010000
+#define MPC85XX_PMUXCR_IFC_ADDR20_21_USB 0x00020000
+#define MPC85XX_PMUXCR_IFC_ADDR20_21_RES 0x00030000
+#define MPC85XX_PMUXCR_IFC_ADDR22_SDHC 0x00004000
+#define MPC85XX_PMUXCR_IFC_ADDR22_USB 0x00008000
+#define MPC85XX_PMUXCR_IFC_ADDR22_RES 0x0000C000
+#define MPC85XX_PMUXCR_IFC_ADDR23_SDHC 0x00001000
+#define MPC85XX_PMUXCR_IFC_ADDR23_USB 0x00002000
+#define MPC85XX_PMUXCR_IFC_ADDR23_RES 0x00003000
+#define MPC85XX_PMUXCR_IFC_ADDR24_SDHC 0x00000400
+#define MPC85XX_PMUXCR_IFC_ADDR24_USB 0x00000800
+#define MPC85XX_PMUXCR_IFC_ADDR24_RES 0x00000C00
+#define MPC85XX_PMUXCR_IFC_PAR_PERR_RES 0x00000300
+#define MPC85XX_PMUXCR_IFC_PAR_PERR_USB 0x00000200
+#define MPC85XX_PMUXCR_LCLK_RES 0x00000040
+#define MPC85XX_PMUXCR_LCLK_USB 0x00000080
+#define MPC85XX_PMUXCR_LCLK_IFC_CS3 0x000000C0
+#define MPC85XX_PMUXCR_SPI_RES 0x00000030
+#define MPC85XX_PMUXCR_SPI_GPIO 0x00000020
+#define MPC85XX_PMUXCR_CAN1_UART 0x00000004
+#define MPC85XX_PMUXCR_CAN1_TDM 0x00000008
+#define MPC85XX_PMUXCR_CAN1_RES 0x0000000C
+#define MPC85XX_PMUXCR_CAN2_UART 0x00000001
+#define MPC85XX_PMUXCR_CAN2_TDM 0x00000002
+#define MPC85XX_PMUXCR_CAN2_RES 0x00000003
#endif
#if defined(CONFIG_ARCH_P1023)
-#define MPC85xx_PMUXCR_TSEC1_1 0x10000000
+#define MPC85XX_PMUXCR_TSEC1_1 0x10000000
#else
-#define MPC85xx_PMUXCR_SD_DATA 0x80000000
-#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
-#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
-#define MPC85xx_PMUXCR_ELBC_OFF_USB2_ON 0x01000000
-#define MPC85xx_PMUXCR_TDM_ENA 0x00800000
-#define MPC85xx_PMUXCR_QE0 0x00008000
-#define MPC85xx_PMUXCR_QE1 0x00004000
-#define MPC85xx_PMUXCR_QE2 0x00002000
-#define MPC85xx_PMUXCR_QE3 0x00001000
-#define MPC85xx_PMUXCR_QE4 0x00000800
-#define MPC85xx_PMUXCR_QE5 0x00000400
-#define MPC85xx_PMUXCR_QE6 0x00000200
-#define MPC85xx_PMUXCR_QE7 0x00000100
-#define MPC85xx_PMUXCR_QE8 0x00000080
-#define MPC85xx_PMUXCR_QE9 0x00000040
-#define MPC85xx_PMUXCR_QE10 0x00000020
-#define MPC85xx_PMUXCR_QE11 0x00000010
-#define MPC85xx_PMUXCR_QE12 0x00000008
+#define MPC85XX_PMUXCR_SD_DATA 0x80000000
+#define MPC85XX_PMUXCR_SDHC_CD 0x40000000
+#define MPC85XX_PMUXCR_SDHC_WP 0x20000000
+#define MPC85XX_PMUXCR_ELBC_OFF_USB2_ON 0x01000000
+#define MPC85XX_PMUXCR_TDM_ENA 0x00800000
+#define MPC85XX_PMUXCR_QE0 0x00008000
+#define MPC85XX_PMUXCR_QE1 0x00004000
+#define MPC85XX_PMUXCR_QE2 0x00002000
+#define MPC85XX_PMUXCR_QE3 0x00001000
+#define MPC85XX_PMUXCR_QE4 0x00000800
+#define MPC85XX_PMUXCR_QE5 0x00000400
+#define MPC85XX_PMUXCR_QE6 0x00000200
+#define MPC85XX_PMUXCR_QE7 0x00000100
+#define MPC85XX_PMUXCR_QE8 0x00000080
+#define MPC85XX_PMUXCR_QE9 0x00000040
+#define MPC85XX_PMUXCR_QE10 0x00000020
+#define MPC85XX_PMUXCR_QE11 0x00000010
+#define MPC85XX_PMUXCR_QE12 0x00000008
#endif
#if defined(CONFIG_ARCH_BSC9131)
-#define MPC85xx_PMUXCR_TSEC2_DMA_GPIO_IRQ 0x40000000
-#define MPC85xx_PMUXCR_TSEC2_USB 0xC0000000
-#define MPC85xx_PMUXCR_TSEC2_1588_PPS 0x10000000
-#define MPC85xx_PMUXCR_TSEC2_1588_RSVD 0x30000000
-#define MPC85xx_PMUXCR_IFC_AD_GPIO 0x04000000
-#define MPC85xx_PMUXCR_IFC_AD_GPIO_MASK 0x0C000000
-#define MPC85xx_PMUXCR_IFC_AD15_GPIO 0x01000000
-#define MPC85xx_PMUXCR_IFC_AD15_TIMER2 0x02000000
-#define MPC85xx_PMUXCR_IFC_AD16_GPO8 0x00400000
-#define MPC85xx_PMUXCR_IFC_AD16_MSRCID0 0x00800000
-#define MPC85xx_PMUXCR_IFC_AD17_GPO 0x00100000
-#define MPC85xx_PMUXCR_IFC_AD17_GPO_MASK 0x00300000
-#define MPC85xx_PMUXCR_IFC_AD17_MSRCID_DSP 0x00200000
-#define MPC85xx_PMUXCR_IFC_CS2_GPO65 0x00040000
-#define MPC85xx_PMUXCR_IFC_CS2_DSP_TDI 0x00080000
-#define MPC85xx_PMUXCR_SDHC_USIM 0x00010000
-#define MPC85xx_PMUXCR_SDHC_TDM_RFS_RCK 0x00020000
-#define MPC85xx_PMUXCR_SDHC_GPIO77 0x00030000
-#define MPC85xx_PMUXCR_SDHC_RESV 0x00004000
-#define MPC85xx_PMUXCR_SDHC_TDM_TXD_RXD 0x00008000
-#define MPC85xx_PMUXCR_SDHC_GPIO_TIMER4 0x0000C000
-#define MPC85xx_PMUXCR_USB_CLK_UART_SIN 0x00001000
-#define MPC85xx_PMUXCR_USB_CLK_GPIO69 0x00002000
-#define MPC85xx_PMUXCR_USB_CLK_TIMER3 0x00003000
-#define MPC85xx_PMUXCR_USB_UART_GPIO0 0x00000400
-#define MPC85xx_PMUXCR_USB_RSVD 0x00000C00
-#define MPC85xx_PMUXCR_USB_GPIO62_TRIG_IN 0x00000800
-#define MPC85xx_PMUXCR_USB_D1_2_IIC2_SDA_SCL 0x00000100
-#define MPC85xx_PMUXCR_USB_D1_2_GPIO71_72 0x00000200
-#define MPC85xx_PMUXCR_USB_D1_2_RSVD 0x00000300
-#define MPC85xx_PMUXCR_USB_DIR_GPIO2 0x00000040
-#define MPC85xx_PMUXCR_USB_DIR_TIMER1 0x00000080
-#define MPC85xx_PMUXCR_USB_DIR_MCP_B 0x000000C0
-#define MPC85xx_PMUXCR_SPI1_UART3 0x00000010
-#define MPC85xx_PMUXCR_SPI1_SIM 0x00000020
-#define MPC85xx_PMUXCR_SPI1_CKSTP_IN_GPO74 0x00000030
-#define MPC85xx_PMUXCR_SPI1_CS2_CKSTP_OUT_B 0x00000004
-#define MPC85xx_PMUXCR_SPI1_CS2_dbg_adi1_rxen 0x00000008
-#define MPC85xx_PMUXCR_SPI1_CS2_GPO75 0x0000000C
-#define MPC85xx_PMUXCR_SPI1_CS3_ANT_TCXO_PWM 0x00000001
-#define MPC85xx_PMUXCR_SPI1_CS3_dbg_adi2_rxen 0x00000002
-#define MPC85xx_PMUXCR_SPI1_CS3_GPO76 0x00000003
+#define MPC85XX_PMUXCR_TSEC2_DMA_GPIO_IRQ 0x40000000
+#define MPC85XX_PMUXCR_TSEC2_USB 0xC0000000
+#define MPC85XX_PMUXCR_TSEC2_1588_PPS 0x10000000
+#define MPC85XX_PMUXCR_TSEC2_1588_RSVD 0x30000000
+#define MPC85XX_PMUXCR_IFC_AD_GPIO 0x04000000
+#define MPC85XX_PMUXCR_IFC_AD_GPIO_MASK 0x0C000000
+#define MPC85XX_PMUXCR_IFC_AD15_GPIO 0x01000000
+#define MPC85XX_PMUXCR_IFC_AD15_TIMER2 0x02000000
+#define MPC85XX_PMUXCR_IFC_AD16_GPO8 0x00400000
+#define MPC85XX_PMUXCR_IFC_AD16_MSRCID0 0x00800000
+#define MPC85XX_PMUXCR_IFC_AD17_GPO 0x00100000
+#define MPC85XX_PMUXCR_IFC_AD17_GPO_MASK 0x00300000
+#define MPC85XX_PMUXCR_IFC_AD17_MSRCID_DSP 0x00200000
+#define MPC85XX_PMUXCR_IFC_CS2_GPO65 0x00040000
+#define MPC85XX_PMUXCR_IFC_CS2_DSP_TDI 0x00080000
+#define MPC85XX_PMUXCR_SDHC_USIM 0x00010000
+#define MPC85XX_PMUXCR_SDHC_TDM_RFS_RCK 0x00020000
+#define MPC85XX_PMUXCR_SDHC_GPIO77 0x00030000
+#define MPC85XX_PMUXCR_SDHC_RESV 0x00004000
+#define MPC85XX_PMUXCR_SDHC_TDM_TXD_RXD 0x00008000
+#define MPC85XX_PMUXCR_SDHC_GPIO_TIMER4 0x0000C000
+#define MPC85XX_PMUXCR_USB_CLK_UART_SIN 0x00001000
+#define MPC85XX_PMUXCR_USB_CLK_GPIO69 0x00002000
+#define MPC85XX_PMUXCR_USB_CLK_TIMER3 0x00003000
+#define MPC85XX_PMUXCR_USB_UART_GPIO0 0x00000400
+#define MPC85XX_PMUXCR_USB_RSVD 0x00000C00
+#define MPC85XX_PMUXCR_USB_GPIO62_TRIG_IN 0x00000800
+#define MPC85XX_PMUXCR_USB_D1_2_IIC2_SDA_SCL 0x00000100
+#define MPC85XX_PMUXCR_USB_D1_2_GPIO71_72 0x00000200
+#define MPC85XX_PMUXCR_USB_D1_2_RSVD 0x00000300
+#define MPC85XX_PMUXCR_USB_DIR_GPIO2 0x00000040
+#define MPC85XX_PMUXCR_USB_DIR_TIMER1 0x00000080
+#define MPC85XX_PMUXCR_USB_DIR_MCP_B 0x000000C0
+#define MPC85XX_PMUXCR_SPI1_UART3 0x00000010
+#define MPC85XX_PMUXCR_SPI1_SIM 0x00000020
+#define MPC85XX_PMUXCR_SPI1_CKSTP_IN_GPO74 0x00000030
+#define MPC85XX_PMUXCR_SPI1_CS2_CKSTP_OUT_B 0x00000004
+#define MPC85XX_PMUXCR_SPI1_CS2_dbg_adi1_rxen 0x00000008
+#define MPC85XX_PMUXCR_SPI1_CS2_GPO75 0x0000000C
+#define MPC85XX_PMUXCR_SPI1_CS3_ANT_TCXO_PWM 0x00000001
+#define MPC85XX_PMUXCR_SPI1_CS3_dbg_adi2_rxen 0x00000002
+#define MPC85XX_PMUXCR_SPI1_CS3_GPO76 0x00000003
#endif
#ifdef CONFIG_ARCH_BSC9132
-#define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000
-#define MPC85xx_PMUXCR0_SIM_SEL 0x00014000
+#define MPC85XX_PMUXCR0_SIM_SEL_MASK 0x0003b000
+#define MPC85XX_PMUXCR0_SIM_SEL 0x00014000
#endif
#if defined(CONFIG_ARCH_C29X)
-#define MPC85xx_PMUXCR_SPI_MASK 0x00000300
-#define MPC85xx_PMUXCR_SPI 0x00000000
-#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100
+#define MPC85XX_PMUXCR_SPI_MASK 0x00000300
+#define MPC85XX_PMUXCR_SPI 0x00000000
+#define MPC85XX_PMUXCR_SPI_GPIO 0x00000100
#endif
u32 pmuxcr2; /* Alt. function signal multiplex control 2 */
#if defined(CONFIG_ARCH_P1010)
-#define MPC85xx_PMUXCR2_UART_GPIO 0x40000000
-#define MPC85xx_PMUXCR2_UART_TDM 0x80000000
-#define MPC85xx_PMUXCR2_UART_RES 0xC0000000
-#define MPC85xx_PMUXCR2_IRQ2_TRIG_IN 0x10000000
-#define MPC85xx_PMUXCR2_IRQ2_RES 0x30000000
-#define MPC85xx_PMUXCR2_IRQ3_SRESET 0x04000000
-#define MPC85xx_PMUXCR2_IRQ3_RES 0x0C000000
-#define MPC85xx_PMUXCR2_GPIO01_DRVVBUS 0x01000000
-#define MPC85xx_PMUXCR2_GPIO01_RES 0x03000000
-#define MPC85xx_PMUXCR2_GPIO23_CKSTP 0x00400000
-#define MPC85xx_PMUXCR2_GPIO23_RES 0x00800000
-#define MPC85xx_PMUXCR2_GPIO23_USB 0x00C00000
-#define MPC85xx_PMUXCR2_GPIO4_MCP 0x00100000
-#define MPC85xx_PMUXCR2_GPIO4_RES 0x00200000
-#define MPC85xx_PMUXCR2_GPIO4_CLK_OUT 0x00300000
-#define MPC85xx_PMUXCR2_GPIO5_UDE 0x00040000
-#define MPC85xx_PMUXCR2_GPIO5_RES 0x00080000
-#define MPC85xx_PMUXCR2_READY_ASLEEP 0x00020000
-#define MPC85xx_PMUXCR2_DDR_ECC_MUX 0x00010000
-#define MPC85xx_PMUXCR2_DEBUG_PORT_EXPOSE 0x00008000
-#define MPC85xx_PMUXCR2_POST_EXPOSE 0x00004000
-#define MPC85xx_PMUXCR2_DEBUG_MUX_SEL_USBPHY 0x00002000
-#define MPC85xx_PMUXCR2_PLL_LKDT_EXPOSE 0x00001000
+#define MPC85XX_PMUXCR2_UART_GPIO 0x40000000
+#define MPC85XX_PMUXCR2_UART_TDM 0x80000000
+#define MPC85XX_PMUXCR2_UART_RES 0xC0000000
+#define MPC85XX_PMUXCR2_IRQ2_TRIG_IN 0x10000000
+#define MPC85XX_PMUXCR2_IRQ2_RES 0x30000000
+#define MPC85XX_PMUXCR2_IRQ3_SRESET 0x04000000
+#define MPC85XX_PMUXCR2_IRQ3_RES 0x0C000000
+#define MPC85XX_PMUXCR2_GPIO01_DRVVBUS 0x01000000
+#define MPC85XX_PMUXCR2_GPIO01_RES 0x03000000
+#define MPC85XX_PMUXCR2_GPIO23_CKSTP 0x00400000
+#define MPC85XX_PMUXCR2_GPIO23_RES 0x00800000
+#define MPC85XX_PMUXCR2_GPIO23_USB 0x00C00000
+#define MPC85XX_PMUXCR2_GPIO4_MCP 0x00100000
+#define MPC85XX_PMUXCR2_GPIO4_RES 0x00200000
+#define MPC85XX_PMUXCR2_GPIO4_CLK_OUT 0x00300000
+#define MPC85XX_PMUXCR2_GPIO5_UDE 0x00040000
+#define MPC85XX_PMUXCR2_GPIO5_RES 0x00080000
+#define MPC85XX_PMUXCR2_READY_ASLEEP 0x00020000
+#define MPC85XX_PMUXCR2_DDR_ECC_MUX 0x00010000
+#define MPC85XX_PMUXCR2_DEBUG_PORT_EXPOSE 0x00008000
+#define MPC85XX_PMUXCR2_POST_EXPOSE 0x00004000
+#define MPC85XX_PMUXCR2_DEBUG_MUX_SEL_USBPHY 0x00002000
+#define MPC85XX_PMUXCR2_PLL_LKDT_EXPOSE 0x00001000
#endif
#if defined(CONFIG_ARCH_BSC9131) || defined(CONFIG_ARCH_BSC9132)
#if defined(CONFIG_ARCH_BSC9131)
-#define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD 0X40000000
-#define MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS 0X80000000
-#define MPC85xx_PMUXCR2_UART_CTS_B0_GPIO42 0xC0000000
-#define MPC85xx_PMUXCR2_UART_RTS_B0_PWM2 0x10000000
-#define MPC85xx_PMUXCR2_UART_RTS_B0_DSP_TCK 0x20000000
-#define MPC85xx_PMUXCR2_UART_RTS_B0_GPIO43 0x30000000
-#define MPC85xx_PMUXCR2_UART_CTS_B1_SIM_PD 0x04000000
-#define MPC85xx_PMUXCR2_UART_CTS_B1_SRESET_B 0x08000000
-#define MPC85xx_PMUXCR2_UART_CTS_B1_GPIO44 0x0C000000
-#define MPC85xx_PMUXCR2_UART_RTS_B1_PPS_LED 0x01000000
-#define MPC85xx_PMUXCR2_UART_RTS_B1_RSVD 0x02000000
-#define MPC85xx_PMUXCR2_UART_RTS_B1_GPIO45 0x03000000
-#define MPC85xx_PMUXCR2_TRIG_OUT_ASLEEP 0x00400000
-#define MPC85xx_PMUXCR2_TRIG_OUT_DSP_TRST_B 0x00800000
-#define MPC85xx_PMUXCR2_ANT1_TIMER5 0x00100000
-#define MPC85xx_PMUXCR2_ANT1_TSEC_1588 0x00200000
-#define MPC85xx_PMUXCR2_ANT1_GPIO95_19 0x00300000
-#define MPC85xx_PMUXCR2_ANT1_TX_RX_FRAME_MAX3_LOCK 0x00040000
-#define MPC85xx_PMUXCR2_ANT1_TX_RX_FRAME_RSVD 0x00080000
-#define MPC85xx_PMUXCR2_ANT1_TX_RX_FRAME_GPIO80_20 0x000C0000
-#define MPC85xx_PMUXCR2_ANT1_DIO0_3_SPI3_CS0 0x00010000
-#define MPC85xx_PMUXCR2_ANT1_DIO0_3_ANT2_DO_3 0x00020000
-#define MPC85xx_PMUXCR2_ANT1_DIO0_3_GPIO81_84 0x00030000
-#define MPC85xx_PMUXCR2_ANT1_DIO4_7_SPI4 0x00004000
-#define MPC85xx_PMUXCR2_ANT1_DIO4_7_ANT2_DO4_7 0x00008000
-#define MPC85xx_PMUXCR2_ANT1_DIO4_7_GPIO85_88 0x0000C000
-#define MPC85xx_PMUXCR2_ANT1_DIO8_9_MAX2_1_LOCK 0x00001000
-#define MPC85xx_PMUXCR2_ANT1_DIO8_9_ANT2_DO8_9 0x00002000
-#define MPC85xx_PMUXCR2_ANT1_DIO8_9_GPIO21_22 0x00003000
-#define MPC85xx_PMUXCR2_ANT1_DIO10_11_TIMER6_7 0x00000400
-#define MPC85xx_PMUXCR2_ANT1_DIO10_11_ANT2_DO10_11 0x00000800
-#define MPC85xx_PMUXCR2_ANT1_DIO10_11_GPIO23_24 0x00000C00
-#define MPC85xx_PMUXCR2_ANT2_RSVD 0x00000100
-#define MPC85xx_PMUXCR2_ANT2_GPO90_91_DMA 0x00000300
-#define MPC85xx_PMUXCR2_ANT2_ENABLE_DIO0_10_USB 0x00000040
-#define MPC85xx_PMUXCR2_ANT2_ENABLE_DIO0_10_GPIO 0x000000C0
-#define MPC85xx_PMUXCR2_ANT2_DIO11_RSVD 0x00000010
-#define MPC85xx_PMUXCR2_ANT2_DIO11_TIMER8 0x00000020
-#define MPC85xx_PMUXCR2_ANT2_DIO11_GPIO61 0x00000030
-#define MPC85xx_PMUXCR2_ANT3_AGC_GPO53 0x00000004
-#define MPC85xx_PMUXCR2_ANT3_DO_TDM 0x00000001
-#define MPC85xx_PMUXCR2_ANT3_DO_GPIO46_49 0x00000002
+#define MPC85XX_PMUXCR2_UART_CTS_B0_SIM_PD 0X40000000
+#define MPC85XX_PMUXCR2_UART_CTS_B0_DSP_TMS 0X80000000
+#define MPC85XX_PMUXCR2_UART_CTS_B0_GPIO42 0xC0000000
+#define MPC85XX_PMUXCR2_UART_RTS_B0_PWM2 0x10000000
+#define MPC85XX_PMUXCR2_UART_RTS_B0_DSP_TCK 0x20000000
+#define MPC85XX_PMUXCR2_UART_RTS_B0_GPIO43 0x30000000
+#define MPC85XX_PMUXCR2_UART_CTS_B1_SIM_PD 0x04000000
+#define MPC85XX_PMUXCR2_UART_CTS_B1_SRESET_B 0x08000000
+#define MPC85XX_PMUXCR2_UART_CTS_B1_GPIO44 0x0C000000
+#define MPC85XX_PMUXCR2_UART_RTS_B1_PPS_LED 0x01000000
+#define MPC85XX_PMUXCR2_UART_RTS_B1_RSVD 0x02000000
+#define MPC85XX_PMUXCR2_UART_RTS_B1_GPIO45 0x03000000
+#define MPC85XX_PMUXCR2_TRIG_OUT_ASLEEP 0x00400000
+#define MPC85XX_PMUXCR2_TRIG_OUT_DSP_TRST_B 0x00800000
+#define MPC85XX_PMUXCR2_ANT1_TIMER5 0x00100000
+#define MPC85XX_PMUXCR2_ANT1_TSEC_1588 0x00200000
+#define MPC85XX_PMUXCR2_ANT1_GPIO95_19 0x00300000
+#define MPC85XX_PMUXCR2_ANT1_TX_RX_FRAME_MAX3_LOCK 0x00040000
+#define MPC85XX_PMUXCR2_ANT1_TX_RX_FRAME_RSVD 0x00080000
+#define MPC85XX_PMUXCR2_ANT1_TX_RX_FRAME_GPIO80_20 0x000C0000
+#define MPC85XX_PMUXCR2_ANT1_DIO0_3_SPI3_CS0 0x00010000
+#define MPC85XX_PMUXCR2_ANT1_DIO0_3_ANT2_DO_3 0x00020000
+#define MPC85XX_PMUXCR2_ANT1_DIO0_3_GPIO81_84 0x00030000
+#define MPC85XX_PMUXCR2_ANT1_DIO4_7_SPI4 0x00004000
+#define MPC85XX_PMUXCR2_ANT1_DIO4_7_ANT2_DO4_7 0x00008000
+#define MPC85XX_PMUXCR2_ANT1_DIO4_7_GPIO85_88 0x0000C000
+#define MPC85XX_PMUXCR2_ANT1_DIO8_9_MAX2_1_LOCK 0x00001000
+#define MPC85XX_PMUXCR2_ANT1_DIO8_9_ANT2_DO8_9 0x00002000
+#define MPC85XX_PMUXCR2_ANT1_DIO8_9_GPIO21_22 0x00003000
+#define MPC85XX_PMUXCR2_ANT1_DIO10_11_TIMER6_7 0x00000400
+#define MPC85XX_PMUXCR2_ANT1_DIO10_11_ANT2_DO10_11 0x00000800
+#define MPC85XX_PMUXCR2_ANT1_DIO10_11_GPIO23_24 0x00000C00
+#define MPC85XX_PMUXCR2_ANT2_RSVD 0x00000100
+#define MPC85XX_PMUXCR2_ANT2_GPO90_91_DMA 0x00000300
+#define MPC85XX_PMUXCR2_ANT2_ENABLE_DIO0_10_USB 0x00000040
+#define MPC85XX_PMUXCR2_ANT2_ENABLE_DIO0_10_GPIO 0x000000C0
+#define MPC85XX_PMUXCR2_ANT2_DIO11_RSVD 0x00000010
+#define MPC85XX_PMUXCR2_ANT2_DIO11_TIMER8 0x00000020
+#define MPC85XX_PMUXCR2_ANT2_DIO11_GPIO61 0x00000030
+#define MPC85XX_PMUXCR2_ANT3_AGC_GPO53 0x00000004
+#define MPC85XX_PMUXCR2_ANT3_DO_TDM 0x00000001
+#define MPC85XX_PMUXCR2_ANT3_DO_GPIO46_49 0x00000002
#endif
u32 pmuxcr3;
#if defined(CONFIG_ARCH_BSC9131)
-#define MPC85xx_PMUXCR3_ANT3_DO4_5_TDM 0x40000000
-#define MPC85xx_PMUXCR3_ANT3_DO4_5_GPIO_50_51 0x80000000
-#define MPC85xx_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B 0x10000000
-#define MPC85xx_PMUXCR3_ANT3_DO6_7_GPIO_52_53 0x20000000
-#define MPC85xx_PMUXCR3_ANT3_DO8_MCP_B 0x04000000
-#define MPC85xx_PMUXCR3_ANT3_DO8_GPIO54 0x08000000
-#define MPC85xx_PMUXCR3_ANT3_DO9_10_CKSTP_IN_OUT 0x01000000
-#define MPC85xx_PMUXCR3_ANT3_DO9_10_GPIO55_56 0x02000000
-#define MPC85xx_PMUXCR3_ANT3_DO11_IRQ_OUT 0x00400000
-#define MPC85xx_PMUXCR3_ANT3_DO11_GPIO57 0x00800000
-#define MPC85xx_PMUXCR3_SPI2_CS2_GPO93 0x00100000
-#define MPC85xx_PMUXCR3_SPI2_CS3_GPO94 0x00040000
-#define MPC85xx_PMUXCR3_ANT2_AGC_RSVD 0x00010000
-#define MPC85xx_PMUXCR3_ANT2_GPO89 0x00030000
+#define MPC85XX_PMUXCR3_ANT3_DO4_5_TDM 0x40000000
+#define MPC85XX_PMUXCR3_ANT3_DO4_5_GPIO_50_51 0x80000000
+#define MPC85XX_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B 0x10000000
+#define MPC85XX_PMUXCR3_ANT3_DO6_7_GPIO_52_53 0x20000000
+#define MPC85XX_PMUXCR3_ANT3_DO8_MCP_B 0x04000000
+#define MPC85XX_PMUXCR3_ANT3_DO8_GPIO54 0x08000000
+#define MPC85XX_PMUXCR3_ANT3_DO9_10_CKSTP_IN_OUT 0x01000000
+#define MPC85XX_PMUXCR3_ANT3_DO9_10_GPIO55_56 0x02000000
+#define MPC85XX_PMUXCR3_ANT3_DO11_IRQ_OUT 0x00400000
+#define MPC85XX_PMUXCR3_ANT3_DO11_GPIO57 0x00800000
+#define MPC85XX_PMUXCR3_SPI2_CS2_GPO93 0x00100000
+#define MPC85XX_PMUXCR3_SPI2_CS3_GPO94 0x00040000
+#define MPC85XX_PMUXCR3_ANT2_AGC_RSVD 0x00010000
+#define MPC85XX_PMUXCR3_ANT2_GPO89 0x00030000
#endif
#ifdef CONFIG_ARCH_BSC9132
-#define MPC85xx_PMUXCR3_USB_SEL_MASK 0x0000ff00
-#define MPC85xx_PMUXCR3_UART2_SEL 0x00005000
-#define MPC85xx_PMUXCR3_UART3_SEL_MASK 0xc0000000
-#define MPC85xx_PMUXCR3_UART3_SEL 0x40000000
+#define MPC85XX_PMUXCR3_USB_SEL_MASK 0x0000ff00
+#define MPC85XX_PMUXCR3_UART2_SEL 0x00005000
+#define MPC85XX_PMUXCR3_UART3_SEL_MASK 0xc0000000
+#define MPC85XX_PMUXCR3_UART3_SEL 0x40000000
#endif
u32 pmuxcr4;
#else
u8 res6[8];
#endif
u32 devdisr; /* Device disable control */
-#define MPC85xx_DEVDISR_PCI1 0x80000000
-#define MPC85xx_DEVDISR_PCI2 0x40000000
-#define MPC85xx_DEVDISR_PCIE 0x20000000
-#define MPC85xx_DEVDISR_LBC 0x08000000
-#define MPC85xx_DEVDISR_PCIE2 0x04000000
-#define MPC85xx_DEVDISR_PCIE3 0x02000000
-#define MPC85xx_DEVDISR_SEC 0x01000000
-#define MPC85xx_DEVDISR_SRIO 0x00080000
-#define MPC85xx_DEVDISR_RMSG 0x00040000
-#define MPC85xx_DEVDISR_DDR 0x00010000
-#define MPC85xx_DEVDISR_CPU 0x00008000
-#define MPC85xx_DEVDISR_CPU0 MPC85xx_DEVDISR_CPU
-#define MPC85xx_DEVDISR_TB 0x00004000
-#define MPC85xx_DEVDISR_TB0 MPC85xx_DEVDISR_TB
-#define MPC85xx_DEVDISR_CPU1 0x00002000
-#define MPC85xx_DEVDISR_TB1 0x00001000
-#define MPC85xx_DEVDISR_DMA 0x00000400
-#define MPC85xx_DEVDISR_TSEC1 0x00000080
-#define MPC85xx_DEVDISR_TSEC2 0x00000040
-#define MPC85xx_DEVDISR_TSEC3 0x00000020
-#define MPC85xx_DEVDISR_TSEC4 0x00000010
-#define MPC85xx_DEVDISR_I2C 0x00000004
-#define MPC85xx_DEVDISR_DUART 0x00000002
+#define MPC85XX_DEVDISR_PCI1 0x80000000
+#define MPC85XX_DEVDISR_PCI2 0x40000000
+#define MPC85XX_DEVDISR_PCIE 0x20000000
+#define MPC85XX_DEVDISR_LBC 0x08000000
+#define MPC85XX_DEVDISR_PCIE2 0x04000000
+#define MPC85XX_DEVDISR_PCIE3 0x02000000
+#define MPC85XX_DEVDISR_SEC 0x01000000
+#define MPC85XX_DEVDISR_SRIO 0x00080000
+#define MPC85XX_DEVDISR_RMSG 0x00040000
+#define MPC85XX_DEVDISR_DDR 0x00010000
+#define MPC85XX_DEVDISR_CPU 0x00008000
+#define MPC85XX_DEVDISR_CPU0 MPC85XX_DEVDISR_CPU
+#define MPC85XX_DEVDISR_TB 0x00004000
+#define MPC85XX_DEVDISR_TB0 MPC85XX_DEVDISR_TB
+#define MPC85XX_DEVDISR_CPU1 0x00002000
+#define MPC85XX_DEVDISR_TB1 0x00001000
+#define MPC85XX_DEVDISR_DMA 0x00000400
+#define MPC85XX_DEVDISR_TSEC1 0x00000080
+#define MPC85XX_DEVDISR_TSEC2 0x00000040
+#define MPC85XX_DEVDISR_TSEC3 0x00000020
+#define MPC85XX_DEVDISR_TSEC4 0x00000010
+#define MPC85XX_DEVDISR_I2C 0x00000004
+#define MPC85XX_DEVDISR_DUART 0x00000002
u8 res7[12];
u32 powmgtcsr; /* Power management status & control */
u8 res8[12];
@@ -2457,36 +2457,36 @@ struct ccsr_pman {
#define CFG_SYS_FSL_CPC_OFFSET 0x10000
#define CFG_SYS_FSL_SCFG_OFFSET 0xFC000
#define CFG_SYS_FSL_PAMU_OFFSET 0x20000
-#define CFG_SYS_MPC85xx_DMA1_OFFSET 0x100000
-#define CFG_SYS_MPC85xx_DMA2_OFFSET 0x101000
-#define CFG_SYS_MPC85xx_DMA3_OFFSET 0x102000
-#define CFG_SYS_MPC85xx_DMA_OFFSET CFG_SYS_MPC85xx_DMA1_OFFSET
-#define CFG_SYS_MPC85xx_ESPI_OFFSET 0x110000
-#define CFG_SYS_MPC85xx_ESDHC_OFFSET 0x114000
-#define CFG_SYS_MPC85xx_LBC_OFFSET 0x124000
-#define CFG_SYS_MPC85xx_IFC_OFFSET 0x124000
-#define CFG_SYS_MPC85xx_GPIO_OFFSET 0x130000
-#define CFG_SYS_MPC85xx_TDM_OFFSET 0x185000
-#define CFG_SYS_MPC85xx_QE_OFFSET 0x140000
+#define CFG_SYS_MPC85XX_DMA1_OFFSET 0x100000
+#define CFG_SYS_MPC85XX_DMA2_OFFSET 0x101000
+#define CFG_SYS_MPC85XX_DMA3_OFFSET 0x102000
+#define CFG_SYS_MPC85XX_DMA_OFFSET CFG_SYS_MPC85XX_DMA1_OFFSET
+#define CFG_SYS_MPC85XX_ESPI_OFFSET 0x110000
+#define CFG_SYS_MPC85XX_ESDHC_OFFSET 0x114000
+#define CFG_SYS_MPC85XX_LBC_OFFSET 0x124000
+#define CFG_SYS_MPC85XX_IFC_OFFSET 0x124000
+#define CFG_SYS_MPC85XX_GPIO_OFFSET 0x130000
+#define CFG_SYS_MPC85XX_TDM_OFFSET 0x185000
+#define CFG_SYS_MPC85XX_QE_OFFSET 0x140000
#define CFG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000
#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && !defined(CONFIG_ARCH_B4860) && \
!defined(CONFIG_ARCH_B4420)
-#define CFG_SYS_MPC85xx_PCIE1_OFFSET 0x240000
-#define CFG_SYS_MPC85xx_PCIE2_OFFSET 0x250000
-#define CFG_SYS_MPC85xx_PCIE3_OFFSET 0x260000
-#define CFG_SYS_MPC85xx_PCIE4_OFFSET 0x270000
+#define CFG_SYS_MPC85XX_PCIE1_OFFSET 0x240000
+#define CFG_SYS_MPC85XX_PCIE2_OFFSET 0x250000
+#define CFG_SYS_MPC85XX_PCIE3_OFFSET 0x260000
+#define CFG_SYS_MPC85XX_PCIE4_OFFSET 0x270000
#else
-#define CFG_SYS_MPC85xx_PCIE1_OFFSET 0x200000
-#define CFG_SYS_MPC85xx_PCIE2_OFFSET 0x201000
-#define CFG_SYS_MPC85xx_PCIE3_OFFSET 0x202000
-#define CFG_SYS_MPC85xx_PCIE4_OFFSET 0x203000
+#define CFG_SYS_MPC85XX_PCIE1_OFFSET 0x200000
+#define CFG_SYS_MPC85XX_PCIE2_OFFSET 0x201000
+#define CFG_SYS_MPC85XX_PCIE3_OFFSET 0x202000
+#define CFG_SYS_MPC85XX_PCIE4_OFFSET 0x203000
#endif
-#define CFG_SYS_MPC85xx_USB1_OFFSET 0x210000
-#define CFG_SYS_MPC85xx_USB2_OFFSET 0x211000
-#define CFG_SYS_MPC85xx_USB1_PHY_OFFSET 0x214000
-#define CFG_SYS_MPC85xx_USB2_PHY_OFFSET 0x214100
-#define CFG_SYS_MPC85xx_SATA1_OFFSET 0x220000
-#define CFG_SYS_MPC85xx_SATA2_OFFSET 0x221000
+#define CFG_SYS_MPC85XX_USB1_OFFSET 0x210000
+#define CFG_SYS_MPC85XX_USB2_OFFSET 0x211000
+#define CFG_SYS_MPC85XX_USB1_PHY_OFFSET 0x214000
+#define CFG_SYS_MPC85XX_USB2_PHY_OFFSET 0x214100
+#define CFG_SYS_MPC85XX_SATA1_OFFSET 0x220000
+#define CFG_SYS_MPC85XX_SATA2_OFFSET 0x221000
#define CFG_SYS_FSL_SEC_OFFSET 0x300000
#define CFG_SYS_FSL_JR0_OFFSET 0x301000
#define CFG_SYS_SEC_MON_OFFSET 0x314000
@@ -2515,34 +2515,34 @@ struct ccsr_pman {
#define CFG_SYS_FSL_FM2_RX1_10G_OFFSET 0x591000
#define CFG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000
#else
-#define CFG_SYS_MPC85xx_ECM_OFFSET 0x0000
+#define CFG_SYS_MPC85XX_ECM_OFFSET 0x0000
#define CFG_SYS_MPC8xxx_DDR_OFFSET 0x2000
-#define CFG_SYS_MPC85xx_LBC_OFFSET 0x5000
+#define CFG_SYS_MPC85XX_LBC_OFFSET 0x5000
#define CFG_SYS_MPC8xxx_DDR2_OFFSET 0x6000
-#define CFG_SYS_MPC85xx_ESPI_OFFSET 0x7000
-#define CFG_SYS_MPC85xx_PCI1_OFFSET 0x8000
-#define CFG_SYS_MPC85xx_PCIX_OFFSET 0x8000
-#define CFG_SYS_MPC85xx_PCI2_OFFSET 0x9000
-#define CFG_SYS_MPC85xx_PCIX2_OFFSET 0x9000
-#define CFG_SYS_MPC85xx_PCIE1_OFFSET 0xa000
-#define CFG_SYS_MPC85xx_PCIE2_OFFSET 0x9000
+#define CFG_SYS_MPC85XX_ESPI_OFFSET 0x7000
+#define CFG_SYS_MPC85XX_PCI1_OFFSET 0x8000
+#define CFG_SYS_MPC85XX_PCIX_OFFSET 0x8000
+#define CFG_SYS_MPC85XX_PCI2_OFFSET 0x9000
+#define CFG_SYS_MPC85XX_PCIX2_OFFSET 0x9000
+#define CFG_SYS_MPC85XX_PCIE1_OFFSET 0xa000
+#define CFG_SYS_MPC85XX_PCIE2_OFFSET 0x9000
#if defined(CONFIG_ARCH_P2020)
-#define CFG_SYS_MPC85xx_PCIE3_OFFSET 0x8000
+#define CFG_SYS_MPC85XX_PCIE3_OFFSET 0x8000
#else
-#define CFG_SYS_MPC85xx_PCIE3_OFFSET 0xb000
+#define CFG_SYS_MPC85XX_PCIE3_OFFSET 0xb000
#endif
-#define CFG_SYS_MPC85xx_GPIO_OFFSET 0xF000
-#define CFG_SYS_MPC85xx_SATA1_OFFSET 0x18000
-#define CFG_SYS_MPC85xx_SATA2_OFFSET 0x19000
-#define CFG_SYS_MPC85xx_IFC_OFFSET 0x1e000
-#define CFG_SYS_MPC85xx_L2_OFFSET 0x20000
-#define CFG_SYS_MPC85xx_DMA_OFFSET 0x21000
-#define CFG_SYS_MPC85xx_USB1_OFFSET 0x22000
-#define CFG_SYS_MPC85xx_USB2_OFFSET 0x23000
-#define CFG_SYS_MPC85xx_USB1_PHY_OFFSET 0xE5000
-#define CFG_SYS_MPC85xx_USB2_PHY_OFFSET 0xE5100
+#define CFG_SYS_MPC85XX_GPIO_OFFSET 0xF000
+#define CFG_SYS_MPC85XX_SATA1_OFFSET 0x18000
+#define CFG_SYS_MPC85XX_SATA2_OFFSET 0x19000
+#define CFG_SYS_MPC85XX_IFC_OFFSET 0x1e000
+#define CFG_SYS_MPC85XX_L2_OFFSET 0x20000
+#define CFG_SYS_MPC85XX_DMA_OFFSET 0x21000
+#define CFG_SYS_MPC85XX_USB1_OFFSET 0x22000
+#define CFG_SYS_MPC85XX_USB2_OFFSET 0x23000
+#define CFG_SYS_MPC85XX_USB1_PHY_OFFSET 0xE5000
+#define CFG_SYS_MPC85XX_USB2_PHY_OFFSET 0xE5100
#define CFG_SYS_MDIO1_OFFSET 0x24000
-#define CFG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
+#define CFG_SYS_MPC85XX_ESDHC_OFFSET 0x2e000
#if defined(CONFIG_ARCH_C29X)
#define CFG_SYS_FSL_SEC_OFFSET 0x80000
#define CFG_SYS_FSL_JR0_OFFSET 0x81000
@@ -2550,8 +2550,8 @@ struct ccsr_pman {
#define CFG_SYS_FSL_SEC_OFFSET 0x30000
#define CFG_SYS_FSL_JR0_OFFSET 0x31000
#endif
-#define CFG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
-#define CFG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
+#define CFG_SYS_MPC85XX_SERDES2_OFFSET 0xE3100
+#define CFG_SYS_MPC85XX_SERDES1_OFFSET 0xE3000
#define CFG_SYS_SEC_MON_OFFSET 0xE6000
#define CFG_SYS_SFP_OFFSET 0xE7000
#define CFG_SYS_FSL_QMAN_OFFSET 0x88000
@@ -2562,8 +2562,8 @@ struct ccsr_pman {
#define CFG_SYS_FSL_FM1_DTSEC1_OFFSET 0x1e0000
#endif
-#define CFG_SYS_MPC85xx_PIC_OFFSET 0x40000
-#define CFG_SYS_MPC85xx_GUTS_OFFSET 0xE0000
+#define CFG_SYS_MPC85XX_PIC_OFFSET 0x40000
+#define CFG_SYS_MPC85XX_GUTS_OFFSET 0xE0000
#define CFG_SYS_FSL_SRIO_OFFSET 0xC0000
#define CFG_SYS_FSL_CPC_ADDR \
@@ -2580,16 +2580,16 @@ struct ccsr_pman {
(CONFIG_SYS_IMMR + CFG_SYS_FSL_RAID_ENGINE_OFFSET)
#define CFG_SYS_FSL_CORENET_RMAN_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_FSL_CORENET_RMAN_OFFSET)
-#define CFG_SYS_MPC85xx_GUTS_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_GUTS_OFFSET)
+#define CFG_SYS_MPC85XX_GUTS_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_GUTS_OFFSET)
#define CFG_SYS_FSL_CORENET_CCM_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_FSL_CORENET_CCM_OFFSET)
#define CFG_SYS_FSL_CORENET_CLK_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_FSL_CORENET_CLK_OFFSET)
#define CFG_SYS_FSL_CORENET_RCPM_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_FSL_CORENET_RCPM_OFFSET)
-#define CFG_SYS_MPC85xx_ECM_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_ECM_OFFSET)
+#define CFG_SYS_MPC85XX_ECM_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_ECM_OFFSET)
#define CFG_SYS_FSL_DDR_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_MPC8xxx_DDR_OFFSET)
#define CFG_SYS_FSL_DDR2_ADDR \
@@ -2597,33 +2597,33 @@ struct ccsr_pman {
#define CFG_SYS_FSL_DDR3_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_MPC8xxx_DDR3_OFFSET)
#define CFG_SYS_LBC_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_LBC_OFFSET)
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_LBC_OFFSET)
#define CFG_SYS_IFC_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_IFC_OFFSET)
-#define CFG_SYS_MPC85xx_ESPI_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_ESPI_OFFSET)
-#define CFG_SYS_MPC85xx_PCIX_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_PCIX_OFFSET)
-#define CFG_SYS_MPC85xx_PCIX2_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_PCIX2_OFFSET)
-#define CFG_SYS_MPC85xx_GPIO_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_GPIO_OFFSET)
-#define CFG_SYS_MPC85xx_SATA1_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_SATA1_OFFSET)
-#define CFG_SYS_MPC85xx_SATA2_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_SATA2_OFFSET)
-#define CFG_SYS_MPC85xx_L2_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_L2_OFFSET)
-#define CFG_SYS_MPC85xx_DMA_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_DMA_OFFSET)
-#define CFG_SYS_MPC85xx_ESDHC_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_ESDHC_OFFSET)
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_IFC_OFFSET)
+#define CFG_SYS_MPC85XX_ESPI_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_ESPI_OFFSET)
+#define CFG_SYS_MPC85XX_PCIX_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_PCIX_OFFSET)
+#define CFG_SYS_MPC85XX_PCIX2_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_PCIX2_OFFSET)
+#define CFG_SYS_MPC85XX_GPIO_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_GPIO_OFFSET)
+#define CFG_SYS_MPC85XX_SATA1_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_SATA1_OFFSET)
+#define CFG_SYS_MPC85XX_SATA2_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_SATA2_OFFSET)
+#define CFG_SYS_MPC85XX_L2_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_L2_OFFSET)
+#define CFG_SYS_MPC85XX_DMA_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_DMA_OFFSET)
+#define CFG_SYS_MPC85XX_ESDHC_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_ESDHC_OFFSET)
#define CFG_SYS_MPC8xxx_PIC_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_PIC_OFFSET)
-#define CFG_SYS_MPC85xx_SERDES1_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_SERDES1_OFFSET)
-#define CFG_SYS_MPC85xx_SERDES2_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_SERDES2_OFFSET)
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_PIC_OFFSET)
+#define CFG_SYS_MPC85XX_SERDES1_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_SERDES1_OFFSET)
+#define CFG_SYS_MPC85XX_SERDES2_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_SERDES2_OFFSET)
#define CFG_SYS_FSL_CORENET_SERDES_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_FSL_CORENET_SERDES_OFFSET)
#define CFG_SYS_FSL_CORENET_SERDES2_ADDR \
@@ -2632,14 +2632,14 @@ struct ccsr_pman {
(CONFIG_SYS_IMMR + CFG_SYS_FSL_CORENET_SERDES3_OFFSET)
#define CFG_SYS_FSL_CORENET_SERDES4_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_FSL_CORENET_SERDES4_OFFSET)
-#define CFG_SYS_MPC85xx_USB1_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_USB1_OFFSET)
-#define CFG_SYS_MPC85xx_USB2_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_USB2_OFFSET)
-#define CFG_SYS_MPC85xx_USB1_PHY_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_USB1_PHY_OFFSET)
-#define CFG_SYS_MPC85xx_USB2_PHY_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_USB2_PHY_OFFSET)
+#define CFG_SYS_MPC85XX_USB1_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_USB1_OFFSET)
+#define CFG_SYS_MPC85XX_USB2_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_USB2_OFFSET)
+#define CFG_SYS_MPC85XX_USB1_PHY_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_USB1_PHY_OFFSET)
+#define CFG_SYS_MPC85XX_USB2_PHY_ADDR \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_USB2_PHY_OFFSET)
#define CFG_SYS_FSL_SEC_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_FSL_SEC_OFFSET)
#define CFG_SYS_FSL_JR0_ADDR \
@@ -2656,9 +2656,9 @@ struct ccsr_pman {
(CONFIG_SYS_IMMR + CFG_SYS_FSL_PAMU_OFFSET)
#define CFG_SYS_PCIE1_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_PCIE1_OFFSET)
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_PCIE1_OFFSET)
#define CFG_SYS_PCIE2_ADDR \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_PCIE2_OFFSET)
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_PCIE2_OFFSET)
#define CFG_SYS_SFP_ADDR \
(CONFIG_SYS_IMMR + CFG_SYS_SFP_OFFSET)
@@ -2736,9 +2736,9 @@ struct dcsr_dcfg_regs {
u8 res_524[0x1000 - 0x524]; /* 0x524 - 0x1000 */
};
-#define CFG_SYS_MPC85xx_SCFG \
- (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_SCFG_OFFSET)
-#define CFG_SYS_MPC85xx_SCFG_OFFSET 0xfc000
+#define CFG_SYS_MPC85XX_SCFG \
+ (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_SCFG_OFFSET)
+#define CFG_SYS_MPC85XX_SCFG_OFFSET 0xfc000
/* The supplement configuration unit register */
struct ccsr_scfg {
u32 dpslpcr; /* 0x000 Deep Sleep Control register */
diff --git a/arch/powerpc/include/asm/mpc85xx_gpio.h b/arch/powerpc/include/asm/mpc85xx_gpio.h
index 0ed6beca387..2643eec7820 100644
--- a/arch/powerpc/include/asm/mpc85xx_gpio.h
+++ b/arch/powerpc/include/asm/mpc85xx_gpio.h
@@ -20,7 +20,7 @@
static inline void mpc85xx_gpio_set(unsigned int mask,
unsigned int dir, unsigned int val)
{
- ccsr_gpio_t *gpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gpio_t *gpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
/* First mask off the unwanted parts of "dir" and "val" */
dir &= mask;
@@ -56,7 +56,7 @@ static inline void mpc85xx_gpio_set_high(unsigned int gpios)
static inline unsigned int mpc85xx_gpio_get(unsigned int mask)
{
- ccsr_gpio_t *gpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gpio_t *gpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
/* Read the requested values */
return in_be32(&gpio->gpdat) & mask;
diff --git a/arch/powerpc/include/asm/ppc.h b/arch/powerpc/include/asm/ppc.h
index 3b13f7ff166..708cd3920cc 100644
--- a/arch/powerpc/include/asm/ppc.h
+++ b/arch/powerpc/include/asm/ppc.h
@@ -15,7 +15,7 @@
#if defined(CONFIG_MPC8xx)
#include <asm/immap_8xx.h>
#endif
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
#include <mpc85xx.h>
#include <asm/immap_85xx.h>
#endif
@@ -50,7 +50,7 @@ static inline uint get_svr(void)
return mfspr(SVR);
}
-#if defined(CONFIG_MPC85xx) || \
+#if defined(CONFIG_MPC85XX) || \
defined(CONFIG_MPC86xx) || \
defined(CONFIG_MPC83XX)
unsigned char in8(unsigned int);
@@ -78,8 +78,8 @@ void ddr_enable_ecc(unsigned int dram_size);
#endif
#endif
-#if defined(CONFIG_MPC85xx)
-typedef MPC85xx_SYS_INFO sys_info_t;
+#if defined(CONFIG_MPC85XX)
+typedef MPC85XX_SYS_INFO sys_info_t;
void get_sys_info(sys_info_t *);
void ft_fixup_cpu(void *, u64);
void ft_fixup_num_cores(void *);
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index d80b7d75563..2bb2af2cb64 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -750,7 +750,7 @@
#define MAS7 SPRN_MAS7
#define MAS8 SPRN_MAS8
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85XX)
#define DAR_DEAR DEAR
#else
#define DAR_DEAR DAR
@@ -1001,7 +1001,7 @@
#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFF7FF) /* SOC w/o E bit*/
/* whether MPC8xxxE (i.e. has SEC) */
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85XX)
#define IS_E_PROCESSOR(svr) (svr & 0x80000)
#else
#if defined(CONFIG_MPC83XX)
@@ -1156,7 +1156,7 @@ int fixup_cpu(void);
int fsl_qoriq_core_to_cluster(unsigned int core);
int fsl_qoriq_dsp_core_to_cluster(unsigned int core);
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
#define CPU_TYPE_ENTRY(n, v, nc) \
{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), \
.mask = (1 << (nc)) - 1 }
@@ -1176,7 +1176,7 @@ int prt_83xx_rsr(void);
#endif /* ndef ASSEMBLY*/
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85XX)
#define EPAPR_MAGIC (0x45504150)
#else
#define EPAPR_MAGIC (0x65504150)
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index 7b392b06bcb..e5324bf8fc1 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -290,7 +290,7 @@ void boot_prep_vxworks(struct bootm_headers *images)
fdt_fixup_memory(images->ft_addr, base, size);
#if defined(CONFIG_MP)
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85XX)
ft_fixup_cpu(images->ft_addr, base + size);
ft_fixup_num_cores(images->ft_addr);
#elif defined(CONFIG_MPC86xx)
diff --git a/arch/powerpc/lib/ppccache.S b/arch/powerpc/lib/ppccache.S
index e55025181f7..472548d494d 100644
--- a/arch/powerpc/lib/ppccache.S
+++ b/arch/powerpc/lib/ppccache.S
@@ -64,7 +64,7 @@ ppcSync:
* flush_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(flush_dcache_range)
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
li r5,L1_CACHE_BYTES-1
andc r3,r3,r5
subf r4,r3,r4
@@ -88,7 +88,7 @@ _GLOBAL(flush_dcache_range)
* invalidate_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(invalidate_dcache_range)
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
li r5,L1_CACHE_BYTES-1
andc r3,r3,r5
subf r4,r3,r4
diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c
index b47ce052516..fa71abad231 100644
--- a/board/freescale/common/fsl_chain_of_trust.c
+++ b/board/freescale/common/fsl_chain_of_trust.c
@@ -27,8 +27,8 @@
#include <asm/arch/immap_ls102xa.h>
#endif
-#if defined(CONFIG_MPC85xx)
-#define CFG_DCFG_ADDR CFG_SYS_MPC85xx_GUTS_ADDR
+#if defined(CONFIG_MPC85XX)
+#define CFG_DCFG_ADDR CFG_SYS_MPC85XX_GUTS_ADDR
#else
#define CFG_DCFG_ADDR CFG_SYS_FSL_GUTS_ADDR
#endif
@@ -50,17 +50,17 @@ int fsl_check_boot_mode_secure(void)
if (val == ITS_MASK)
return 1;
-#if defined(CONFIG_FSL_CORENET) || !defined(CONFIG_MPC85xx)
+#if defined(CONFIG_FSL_CORENET) || !defined(CONFIG_MPC85XX)
/* For PBL based platforms check the SB_EN bit in RCWSR */
val = gur_in32(&gur->rcwsr[RCW_SB_EN_REG_INDEX - 1]) & RCW_SB_EN_MASK;
if (val == RCW_SB_EN_MASK)
return 1;
#endif
-#if defined(CONFIG_MPC85xx) && !defined(CONFIG_FSL_CORENET)
+#if defined(CONFIG_MPC85XX) && !defined(CONFIG_FSL_CORENET)
/* For Non-PBL Platforms, check the Device Status register 2*/
- val = gur_in32(&gur->pordevsr2) & MPC85xx_PORDEVSR2_SBC_MASK;
- if (val != MPC85xx_PORDEVSR2_SBC_MASK)
+ val = gur_in32(&gur->pordevsr2) & MPC85XX_PORDEVSR2_SBC_MASK;
+ if (val != MPC85XX_PORDEVSR2_SBC_MASK)
return 1;
#endif
diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c
index bfe6357b0d6..451341ddc04 100644
--- a/board/freescale/common/fsl_validate.c
+++ b/board/freescale/common/fsl_validate.c
@@ -73,17 +73,17 @@ static u32 check_ie(struct fsl_secboot_img_priv *img)
}
/* This function returns the CSF Header Address of uboot
- * For MPC85xx based platforms, the LAW mapping for NOR
+ * For MPC85XX based platforms, the LAW mapping for NOR
* flash changes in uboot code. Hence the offset needs
* to be calculated and added to the new NOR flash base
* address
*/
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85XX)
#include <flash.h>
int get_csf_base_addr(u32 *csf_addr, u32 *flash_base_addr)
{
- struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 csf_hdr_addr = in_be32(&gur->scratchrw[0]);
u32 csf_flash_offset = csf_hdr_addr & ~(CFG_SYS_PBI_FLASH_BASE);
u32 flash_addr, addr;
@@ -168,7 +168,7 @@ static int get_ie_info_addr(uintptr_t *ie_addr)
#endif
/* IE Key Table is the first entry in the SG Table */
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85XX)
*ie_addr = (uintptr_t)((sg_tbl->src_addr &
~(CFG_SYS_PBI_FLASH_BASE)) +
flash_base_addr);
diff --git a/board/freescale/common/mpc85xx_sleep.c b/board/freescale/common/mpc85xx_sleep.c
index d3323b9ec1e..6d05935bf97 100644
--- a/board/freescale/common/mpc85xx_sleep.c
+++ b/board/freescale/common/mpc85xx_sleep.c
@@ -24,7 +24,7 @@ void __weak board_sleep_prepare(void)
bool is_warm_boot(void)
{
- struct ccsr_gur __iomem *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ struct ccsr_gur __iomem *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
if (in_be32(&gur->scrtsr[0]) & DCFG_CCSR_CRSTSR_WDRFR)
return 1;
@@ -46,7 +46,7 @@ static void dp_ddr_restore(void)
{
u64 *src, *dst;
int i;
- struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_MPC85xx_SCFG;
+ struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_MPC85XX_SCFG;
/* get the address of ddr date from SPARECR3 */
src = (u64 *)(in_be32(&scfg->sparecr[2]) + DDR_BUFF_LEN - 8);
@@ -80,7 +80,7 @@ int fsl_dp_resume(void)
{
u32 start_addr;
void (*kernel_resume)(void);
- struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_MPC85xx_SCFG;
+ struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_MPC85XX_SCFG;
if (!is_warm_boot())
return 0;
diff --git a/board/freescale/common/via.h b/board/freescale/common/via.h
index 77cfacc5261..7f2f64668d2 100644
--- a/board/freescale/common/via.h
+++ b/board/freescale/common/via.h
@@ -1,4 +1,4 @@
-#ifndef _MPC85xx_VIA_H
+#ifndef _MPC85XX_VIA_H
void mpc85xx_config_via(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
/* Function 1, IDE */
@@ -15,4 +15,4 @@ void mpc85xx_config_via_power(struct pci_controller* hose, pci_dev_t dev, struct
/* Function 6, AC97 Interface */
void mpc85xx_config_via_ac97(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-#endif /* _MPC85xx_VIA_H */
+#endif /* _MPC85XX_VIA_H */
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index 5ec3f2a76b1..f35ec9902b6 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -542,7 +542,7 @@ int adjust_vdd(ulong vdd_override)
struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
#else
ccsr_gur_t __iomem *gur =
- (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#endif
u8 vid;
u32 fusesr;
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index ec6e3a2d0ab..48f9f6bbc62 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -33,8 +33,8 @@ void local_bus_init(void);
int checkboard (void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_SYS_MPC85xx_ECM_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CFG_SYS_MPC85XX_ECM_ADDR);
/* PCI slot in USER bits CSR[6:7] by convention. */
uint pci_slot = get_pci_slot ();
@@ -68,7 +68,7 @@ int checkboard (void)
void
local_bus_init(void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint clkdiv;
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index d32274b2481..c6ad33018fb 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -82,7 +82,7 @@ struct cpld_data {
int board_early_init_f(void)
{
- ccsr_gpio_t *pgpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gpio_t *pgpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
struct fsl_ifc ifc = {(void *)CFG_SYS_IFC_ADDR, (void *)NULL};
/* Clock configuration to access CPLD using IFC(GPCM) */
setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
@@ -131,7 +131,7 @@ int board_early_init_r(void)
int config_board_mux(int ctrl_type)
{
- ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u8 tmp;
#if CONFIG_IS_ENABLED(DM_I2C)
@@ -625,21 +625,21 @@ void board_reset(void)
int misc_init_r(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
- clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN1_TDM |
- MPC85xx_PMUXCR_CAN1_UART |
- MPC85xx_PMUXCR_CAN2_TDM |
- MPC85xx_PMUXCR_CAN2_UART);
+ clrbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_CAN1_TDM |
+ MPC85XX_PMUXCR_CAN1_UART |
+ MPC85XX_PMUXCR_CAN2_TDM |
+ MPC85XX_PMUXCR_CAN2_UART);
config_board_mux(MUX_TYPE_CAN);
} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
- clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
- MPC85xx_PMUXCR_CAN1_UART);
- setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_TDM |
- MPC85xx_PMUXCR_CAN1_TDM);
- clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
- setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
+ clrbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_CAN2_UART |
+ MPC85XX_PMUXCR_CAN1_UART);
+ setbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_CAN2_TDM |
+ MPC85XX_PMUXCR_CAN1_TDM);
+ clrbits_be32(&gur->pmuxcr2, MPC85XX_PMUXCR2_UART_GPIO);
+ setbits_be32(&gur->pmuxcr2, MPC85XX_PMUXCR2_UART_TDM);
config_board_mux(MUX_TYPE_TDM);
} else {
/* defaultly spi_cs_sel to flash */
@@ -652,7 +652,7 @@ int misc_init_r(void)
config_board_mux(MUX_TYPE_IFC);
#ifdef CONFIG_TARGET_P1010RDB_PB
- setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
+ setbits_be32(&gur->pmuxcr2, MPC85XX_PMUXCR2_GPIO01_DRVVBUS);
#endif
return 0;
}
diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c
index e450f626e0a..461ba372417 100644
--- a/board/freescale/p1010rdb/spl.c
+++ b/board/freescale/p1010rdb/spl.c
@@ -28,7 +28,7 @@ phys_size_t get_effective_memsize(void)
void board_init_f(ulong bootflag)
{
u32 plat_ratio;
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
struct fsl_ifc ifc = {(void *)CFG_SYS_IFC_ADDR, (void *)NULL};
console_init_f();
@@ -37,11 +37,11 @@ void board_init_f(ulong bootflag)
setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
#ifdef CONFIG_TARGET_P1010RDB_PB
- setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
+ setbits_be32(&gur->pmuxcr2, MPC85XX_PMUXCR2_GPIO01_DRVVBUS);
#endif
/* initialize selected port with appropriate baud rate */
- plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85XX_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
gd->bus_clk = get_board_sys_clk() * plat_ratio;
diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c
index 8f0dec4c0ab..54cd7b9aacd 100644
--- a/board/freescale/p1010rdb/spl_minimal.c
+++ b/board/freescale/p1010rdb/spl_minimal.c
@@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR;
void board_init_f(ulong bootflag)
{
u32 plat_ratio;
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
#if defined(CFG_SYS_NAND_BR_PRELIM) && defined(CFG_SYS_NAND_OR_PRELIM)
set_lbc_br(0, CFG_SYS_NAND_BR_PRELIM);
@@ -28,7 +28,7 @@ void board_init_f(ulong bootflag)
#endif
/* initialize selected port with appropriate baud rate */
- plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85XX_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
gd->bus_clk = get_board_sys_clk() * plat_ratio;
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 602b7f0156b..c3bd2837aa2 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -149,7 +149,7 @@ void board_cpld_init(void)
void board_gpio_init(void)
{
#ifdef CONFIG_QE
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
par_io_t *par_io = (par_io_t *) &(gur->qe_par_io);
/* Enable VSC7385 switch */
@@ -159,7 +159,7 @@ void board_gpio_init(void)
setbits_be32(&par_io[GPIO_SLIC_PORT].cpdat, GPIO_SLIC_DATA);
#else
- ccsr_gpio_t *pgpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gpio_t *pgpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
/*
* GPIO10 DDR Reset, open drain
@@ -197,17 +197,17 @@ void board_gpio_init(void)
int board_early_init_f(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
- setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SDHC_CD);
+ setbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_SDHC_CD);
#ifndef SDHC_WP_IS_GPIO
- setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SDHC_WP);
+ setbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_SDHC_WP);
#endif
clrbits_be32(&gur->sdhcdcr, SDHCDCR_CD_INV);
- clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
+ clrbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_SD_DATA);
#if defined(CONFIG_TARGET_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC)
- setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_ENA);
+ setbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_TDM_ENA);
#endif
board_gpio_init();
@@ -227,7 +227,7 @@ int board_early_init_f(void)
int checkboard(void)
{
struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE);
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u8 in, out, invert, io_config, val;
int bus_num = CONFIG_SYS_SPD_BUS_NUM;
@@ -306,7 +306,7 @@ int checkboard(void)
puts("\n");
if (val & 0x1) {
- setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
+ setbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_SD_DATA);
puts("SD/MMC : 8-bit Mode\n");
puts("eSPI : Disabled\n");
} else {
@@ -368,7 +368,7 @@ int board_early_init_r(void)
static void fix_max6370_watchdog(void *blob)
{
int off = fdt_node_offset_by_compatible(blob, -1, "maxim,max6370");
- ccsr_gpio_t *pgpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gpio_t *pgpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
u32 gpioval = in_be32(&pgpio->gpdat);
/*
diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c
index 6c3f82849e3..e107ddefb0f 100644
--- a/board/freescale/p1_p2_rdb_pc/spl.c
+++ b/board/freescale/p1_p2_rdb_pc/spl.c
@@ -29,7 +29,7 @@ phys_size_t get_effective_memsize(void)
void board_init_f(ulong bootflag)
{
u32 plat_ratio, bus_clk;
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
/*
* Call board_early_init_f() as early as possible as it workarounds
@@ -42,17 +42,17 @@ void board_init_f(ulong bootflag)
/* Set pmuxcr to allow both i2c1 and i2c2 */
setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
setbits_be32(&gur->pmuxcr,
- in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
+ in_be32(&gur->pmuxcr) | MPC85XX_PMUXCR_SD_DATA);
/* Read back the register to synchronize the write. */
in_be32(&gur->pmuxcr);
#ifdef CONFIG_SPL_SPI_BOOT
- clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
+ clrbits_be32(&gur->pmuxcr, MPC85XX_PMUXCR_SD_DATA);
#endif
/* initialize selected port with appropriate baud rate */
- plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85XX_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
bus_clk = get_board_sys_clk() * plat_ratio;
gd->bus_clk = bus_clk;
diff --git a/board/freescale/p1_p2_rdb_pc/spl_minimal.c b/board/freescale/p1_p2_rdb_pc/spl_minimal.c
index f9e0b5b25ab..7bc7393894c 100644
--- a/board/freescale/p1_p2_rdb_pc/spl_minimal.c
+++ b/board/freescale/p1_p2_rdb_pc/spl_minimal.c
@@ -19,7 +19,7 @@ DECLARE_GLOBAL_DATA_PTR;
void board_init_f(ulong bootflag)
{
u32 plat_ratio;
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
#if defined(CFG_SYS_NAND_BR_PRELIM) && defined(CFG_SYS_NAND_OR_PRELIM)
set_lbc_br(0, CFG_SYS_NAND_BR_PRELIM);
@@ -27,7 +27,7 @@ void board_init_f(ulong bootflag)
#endif
/* initialize selected port with appropriate baud rate */
- plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85XX_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
gd->bus_clk = get_board_sys_clk() * plat_ratio;
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index 575259b19c0..b94aaa29f82 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -66,7 +66,7 @@ int checkboard(void)
int board_early_init_f(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
/* board only uses the DDR_MCK0/1, so disable the DDR_MCK2/3 */
setbits_be32(&gur->ddrclkdr, 0x000f000f);
@@ -81,7 +81,7 @@ int board_early_init_f(void)
void board_config_lanes_mux(void)
{
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c
index ad78f72f98c..8ccae53c77d 100644
--- a/board/freescale/t102xrdb/eth_t102xrdb.c
+++ b/board/freescale/t102xrdb/eth_t102xrdb.c
@@ -33,7 +33,7 @@ int board_eth_init(struct bd_info *bis)
struct memac_mdio_info dtsec_mdio_info;
struct memac_mdio_info tgec_mdio_info;
struct mii_dev *dev;
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 srds_s1;
srds_s1 = in_be32(&gur->rcwsr[4]) &
diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c
index 9faf259af74..8a7c2309a15 100644
--- a/board/freescale/t102xrdb/spl.c
+++ b/board/freescale/t102xrdb/spl.c
@@ -29,7 +29,7 @@ phys_size_t get_effective_memsize(void)
#define GPIO1_SD_SEL 0x00020000
int board_mmc_getcd(struct mmc *mmc)
{
- ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
/* GPIO1_14, 0: eMMC, 1: SD */
@@ -40,7 +40,7 @@ int board_mmc_getcd(struct mmc *mmc)
int board_mmc_getwp(struct mmc *mmc)
{
- ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
val &= GPIO1_SD_SEL;
@@ -52,7 +52,7 @@ int board_mmc_getwp(struct mmc *mmc)
void board_init_f(ulong bootflag)
{
u32 plat_ratio, sys_clk, ccb_clk;
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
index baa59615b3e..2303aa8fb93 100644
--- a/board/freescale/t102xrdb/t102xrdb.c
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -49,7 +49,7 @@ int checkboard(void)
{
struct cpu_type *cpu = gd->arch.cpu;
static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"};
- ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 srds_s1;
srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
@@ -99,7 +99,7 @@ int checkboard(void)
#ifdef CONFIG_TARGET_T1024RDB
static void board_mux_lane(void)
{
- ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 srds_prtcl_s1;
u8 reg = CPLD_READ(misc_ctl_status);
@@ -222,7 +222,7 @@ static void fdt_enable_nor(void *blob)
int board_mmc_getcd(struct mmc *mmc)
{
- ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
/* GPIO1_14, 0: eMMC, 1: SD/MMC */
@@ -233,7 +233,7 @@ int board_mmc_getcd(struct mmc *mmc)
int board_mmc_getwp(struct mmc *mmc)
{
- ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
val &= GPIO1_SD_SEL;
@@ -243,8 +243,8 @@ int board_mmc_getwp(struct mmc *mmc)
static u32 t1023rdb_ctrl(u32 ctrl_type)
{
- ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
- ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gpio_t __iomem *pgpio = (void *)(CFG_SYS_MPC85XX_GPIO_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 val;
u8 tmp;
int bus_num = I2C_PCA6408_BUS_NUM;
@@ -274,7 +274,7 @@ static u32 t1023rdb_ctrl(u32 ctrl_type)
setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
break;
case GPIO3_GET_VERSION:
- pgpio = (ccsr_gpio_t *)(CFG_SYS_MPC85xx_GPIO_ADDR
+ pgpio = (ccsr_gpio_t *)(CFG_SYS_MPC85XX_GPIO_ADDR
+ GPIO3_OFFSET);
val = in_be32(&pgpio->gpdat);
val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3;
@@ -323,7 +323,7 @@ static u32 t1023rdb_ctrl(u32 ctrl_type)
setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
break;
case GPIO3_GET_VERSION:
- pgpio = (ccsr_gpio_t *)(CFG_SYS_MPC85xx_GPIO_ADDR
+ pgpio = (ccsr_gpio_t *)(CFG_SYS_MPC85XX_GPIO_ADDR
+ GPIO3_OFFSET);
val = in_be32(&pgpio->gpdat);
val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3;
diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c
index dd8283f3c60..621cd781114 100644
--- a/board/freescale/t104xrdb/spl.c
+++ b/board/freescale/t104xrdb/spl.c
@@ -33,7 +33,7 @@ void board_init_f(ulong bootflag)
u32 porsr1, pinctl;
u32 svr = get_svr();
#endif
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND)
if (IS_SVR_REV(svr, 1, 0)) {
diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c
index 8cec71217a7..abc8224e4ef 100644
--- a/board/freescale/t104xrdb/t104xrdb.c
+++ b/board/freescale/t104xrdb/t104xrdb.c
@@ -93,7 +93,7 @@ int board_early_init_r(void)
int misc_init_r(void)
{
- ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 srds_s1;
srds_s1 = in_be32(&gur->rcwsr[4]) >> 24;
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
index 569b193eab7..e1e21b950fe 100644
--- a/board/freescale/t208xqds/eth_t208xqds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -189,7 +189,7 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
const char *phyconn;
int off;
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#ifdef CONFIG_TARGET_T2080QDS
serdes_corenet_t *srds_regs =
(void *)CFG_SYS_FSL_CORENET_SERDES_ADDR;
@@ -413,7 +413,7 @@ void fdt_fixup_board_enet(void *fdt)
*/
static void initialize_lane_to_slot(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
@@ -459,7 +459,7 @@ int board_eth_init(struct bd_info *bis)
int i, idx, lane, slot, interface;
struct memac_mdio_info dtsec_mdio_info;
struct memac_mdio_info tgec_mdio_info;
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
u32 srds_s1;
diff --git a/board/freescale/t208xqds/spl.c b/board/freescale/t208xqds/spl.c
index 8866be54a66..0dcb1411e58 100644
--- a/board/freescale/t208xqds/spl.c
+++ b/board/freescale/t208xqds/spl.c
@@ -67,7 +67,7 @@ unsigned long get_board_ddr_clk(void)
void board_init_f(ulong bootflag)
{
u32 plat_ratio, sys_clk, ccb_clk;
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c
index 8be55e52e5f..cf70dda0e0a 100644
--- a/board/freescale/t208xqds/t208xqds.c
+++ b/board/freescale/t208xqds/t208xqds.c
@@ -88,7 +88,7 @@ int i2c_multiplexer_select_vid_channel(u8 channel)
int brd_mux_lane_to_slot(void)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 srds_prtcl_s1;
srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
diff --git a/board/freescale/t208xrdb/spl.c b/board/freescale/t208xrdb/spl.c
index 130cb8847c0..e6794aa06de 100644
--- a/board/freescale/t208xrdb/spl.c
+++ b/board/freescale/t208xrdb/spl.c
@@ -27,7 +27,7 @@ phys_size_t get_effective_memsize(void)
void board_init_f(ulong bootflag)
{
u32 plat_ratio, sys_clk, ccb_clk;
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c
index 2e52543847b..43011f1edc2 100644
--- a/board/freescale/t4rdb/eth.c
+++ b/board/freescale/t4rdb/eth.c
@@ -43,7 +43,7 @@ int board_eth_init(struct bd_info *bis)
struct memac_mdio_info dtsec_mdio_info;
struct memac_mdio_info tgec_mdio_info;
struct mii_dev *dev;
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 srds_prtcl_s1, srds_prtcl_s2;
srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
diff --git a/board/freescale/t4rdb/spl.c b/board/freescale/t4rdb/spl.c
index 779457d2964..b705b20809b 100644
--- a/board/freescale/t4rdb/spl.c
+++ b/board/freescale/t4rdb/spl.c
@@ -33,7 +33,7 @@ phys_size_t get_effective_memsize(void)
void board_init_f(ulong bootflag)
{
u32 plat_ratio, sys_clk, ccb_clk;
- ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig
index a24d17cf8bf..7c80f1a0933 100644
--- a/board/keymile/Kconfig
+++ b/board/keymile/Kconfig
@@ -35,7 +35,7 @@ config KM_PHRAM
config KM_RESERVED_PRAM
hex "Reserved RAM"
default 0x0 if MPC83XX
- default 0x1000 if MPC85xx || ARCH_LS1021A
+ default 0x1000 if MPC85XX || ARCH_LS1021A
depends on !ARCH_SOCFPGA
help
Reserved physical RAM area at the end of memory for special purposes.
@@ -79,7 +79,7 @@ config SYS_CLIPS_BASE
config KM_COMMON_ETH_INIT
bool "Common Ethernet Initialization"
default y if MPC83XX
- default n if MPC85xx || ARCH_SOCFPGA || ARCH_LS1021A
+ default n if MPC85XX || ARCH_SOCFPGA || ARCH_LS1021A
help
Use the Ethernet initialization implemented in common code that
detects if a Piggy board is present.
diff --git a/board/keymile/kmcent2/kmcent2.c b/board/keymile/kmcent2/kmcent2.c
index ed552c57b5f..b75da715317 100644
--- a/board/keymile/kmcent2/kmcent2.c
+++ b/board/keymile/kmcent2/kmcent2.c
@@ -45,7 +45,7 @@ int checkboard(void)
int board_early_init_f(void)
{
struct fsl_ifc ifc = {(void *)CFG_SYS_IFC_ADDR, (void *)NULL};
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
bool cpuwd_flag = false;
/* board specific IFC configuration: increased bus turnaround time */
@@ -221,8 +221,8 @@ EVENT_SPY(EVT_MISC_INIT_F, kmcent2_misc_init_f);
int misc_init_r(void)
{
serdes_corenet_t *regs = (void *)CFG_SYS_FSL_CORENET_SERDES_ADDR;
- struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_MPC85xx_SCFG;
- ccsr_gur_t __iomem *gur = (ccsr_gur_t __iomem *)CFG_SYS_MPC85xx_GUTS_ADDR;
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_MPC85XX_SCFG;
+ ccsr_gur_t __iomem *gur = (ccsr_gur_t __iomem *)CFG_SYS_MPC85XX_GUTS_ADDR;
/* check SERDES bank 0 reference clock */
u32 actual = in_be32(®s->bank[USED_SRDS_BANK].pllcr0);
diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c
index 9c4dd186fca..107d3c53eba 100644
--- a/board/socrates/socrates.c
+++ b/board/socrates/socrates.c
@@ -35,7 +35,7 @@ ulong flash_get_size (ulong base, int banknum);
int checkboard (void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
char buf[64];
int f;
int i = env_get_f("serial#", buf, sizeof(buf));
@@ -139,7 +139,7 @@ int misc_init_r (void)
void local_bus_init (void)
{
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_SYS_MPC85xx_ECM_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CFG_SYS_MPC85XX_ECM_ADDR);
sys_info_t sysinfo;
uint clkdiv;
uint lbc_mhz;
@@ -175,7 +175,7 @@ void local_bus_init (void)
#ifdef CONFIG_BOARD_EARLY_INIT_R
int board_early_init_r (void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
/* set and reset the GPIO pin 2 which will reset the W83782G chip */
out_8((unsigned char*)&gur->gpoutdr, 0x3F );
diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile
index 002821916c4..6be05152aa4 100644
--- a/board/xes/common/Makefile
+++ b/board/xes/common/Makefile
@@ -5,6 +5,6 @@
obj-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o
obj-$(CONFIG_ARCH_P2020) += fsl_8xxx_clk.o
-obj-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o
+obj-$(CONFIG_MPC85XX) += fsl_8xxx_misc.o board.o
obj-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o
obj-$(CONFIG_NAND_ACTL) += actl_nand.o
diff --git a/board/xes/common/fsl_8xxx_clk.c b/board/xes/common/fsl_8xxx_clk.c
index c36b2afd50e..ef720c17240 100644
--- a/board/xes/common/fsl_8xxx_clk.c
+++ b/board/xes/common/fsl_8xxx_clk.c
@@ -12,8 +12,8 @@
*/
unsigned long get_board_sys_clk(void)
{
-#if defined(CONFIG_MPC85xx)
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+#if defined(CONFIG_MPC85XX)
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#elif defined(CONFIG_MPC86xx)
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
@@ -29,14 +29,14 @@ unsigned long get_board_sys_clk(void)
#endif
}
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
/*
* Return DDR input clock - synchronous with SYSCLK or 66 MHz
* Note: 86xx doesn't support asynchronous DDR clk
*/
unsigned long get_board_ddr_clk(void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 ddr_ratio = (in_be32(&gur->porpllsr) & 0x00003e00) >> 9;
if (ddr_ratio == 0x7)
diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c
index bc7e5c5764f..3082acaaa04 100644
--- a/board/xes/common/fsl_8xxx_misc.c
+++ b/board/xes/common/fsl_8xxx_misc.c
@@ -27,8 +27,8 @@ int board_flash_wp_on(void)
*/
uint get_board_derivative(void)
{
-#if defined(CONFIG_MPC85xx)
- volatile ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR;
+#if defined(CONFIG_MPC85XX)
+ volatile ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
#elif defined(CONFIG_MPC86xx)
volatile immap_t *immap = (immap_t *)CFG_SYS_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
diff --git a/boot/Kconfig b/boot/Kconfig
index fdcfbae7b2c..4bb1af23ac5 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -673,12 +673,12 @@ config SYS_MONITOR_BASE
when booting from flash.
config SPL_SYS_MONITOR_BASE
- depends on MPC85xx && SPL && HAVE_SYS_MONITOR_BASE
+ depends on MPC85XX && SPL && HAVE_SYS_MONITOR_BASE
hex "Physical start address of SPL monitor code"
default SPL_TEXT_BASE
config TPL_SYS_MONITOR_BASE
- depends on MPC85xx && TPL && HAVE_SYS_MONITOR_BASE
+ depends on MPC85XX && TPL && HAVE_SYS_MONITOR_BASE
hex "Physical start address of TPL monitor code"
config DYNAMIC_SYS_CLK_FREQ
diff --git a/common/Kconfig b/common/Kconfig
index e3a5e1be1e9..99ff67cac6a 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -709,7 +709,7 @@ config LAST_STAGE_INIT
config MISC_INIT_R
bool "Execute Misc Init"
- default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx
+ default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85XX
default y if ARCH_OMAP2PLUS && !AM33XX
help
Enabling this option calls 'misc_init_r' function
diff --git a/common/board_r.c b/common/board_r.c
index 3618acad437..e4a5c88cdd4 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -130,7 +130,7 @@ static int initr_reloc_global_data(void)
#elif !defined(CONFIG_SANDBOX) && !defined(CONFIG_NIOS2)
monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
#endif
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
/*
* The gd->cpu pointer is set to an address in flash before relocation.
* We need to update it to point to the same CPU entry in RAM.
diff --git a/common/memsize.c b/common/memsize.c
index 66d5be6a1ff..e8acc2be7a6 100644
--- a/common/memsize.c
+++ b/common/memsize.c
@@ -96,7 +96,7 @@ phys_size_t __weak get_effective_memsize(void)
{
phys_size_t ram_size = gd->ram_size;
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
/*
* Check for overflow and limit ram size to some representable value.
* It is required that ram_base + ram_size must be representable by
diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig
index 05034ce2e46..d93039d461a 100644
--- a/configs/MPC8548CDS_36BIT_defconfig
+++ b/configs/MPC8548CDS_36BIT_defconfig
@@ -6,7 +6,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="mpc8548cds_36b"
CONFIG_ENV_ADDR=0xFFF60000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig
index 965c37e45ec..c34e3a26aba 100644
--- a/configs/MPC8548CDS_defconfig
+++ b/configs/MPC8548CDS_defconfig
@@ -6,7 +6,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="mpc8548cds"
CONFIG_ENV_ADDR=0xFFF60000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig
index 004175c8048..447624a464d 100644
--- a/configs/MPC8548CDS_legacy_defconfig
+++ b/configs/MPC8548CDS_legacy_defconfig
@@ -6,7 +6,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="mpc8548cds"
CONFIG_ENV_ADDR=0xFFF60000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig
index e0ffb164b5a..23a3650331e 100644
--- a/configs/P1010RDB-PA_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig
@@ -13,7 +13,7 @@ CONFIG_TPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_TPL_MAX_SIZE=0x20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig
index 71e17d90ec1..b52dd99c1e8 100644
--- a/configs/P1010RDB-PA_36BIT_NOR_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
index 0df2a559594..5152d3d8008 100644
--- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
@@ -11,7 +11,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
index 086bfcb10e5..d2e3dc974b9 100644
--- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
@@ -13,7 +13,7 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig
index aa8aeda7580..1258d53aaa6 100644
--- a/configs/P1010RDB-PA_NAND_defconfig
+++ b/configs/P1010RDB-PA_NAND_defconfig
@@ -13,7 +13,7 @@ CONFIG_TPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_TPL_MAX_SIZE=0x20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig
index 5807e8bdaa4..55f3b3e0232 100644
--- a/configs/P1010RDB-PA_NOR_defconfig
+++ b/configs/P1010RDB-PA_NOR_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig
index 30ff3ad322b..41da013efd6 100644
--- a/configs/P1010RDB-PA_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_SDCARD_defconfig
@@ -11,7 +11,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig
index d7d8219e947..e33e7d5e711 100644
--- a/configs/P1010RDB-PA_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_SPIFLASH_defconfig
@@ -13,7 +13,7 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig
index 6e053870834..1a81df7b3b2 100644
--- a/configs/P1010RDB-PB_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig
@@ -13,7 +13,7 @@ CONFIG_TPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_TPL_MAX_SIZE=0x20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig
index 7328c142f99..611052102f2 100644
--- a/configs/P1010RDB-PB_36BIT_NOR_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
index 216e14cdacc..7f6b79da634 100644
--- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
+++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
@@ -11,7 +11,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
index 35943d10d77..40615cf9f88 100644
--- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
@@ -13,7 +13,7 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig
index c2c851ca57a..885db3d46a1 100644
--- a/configs/P1010RDB-PB_NAND_defconfig
+++ b/configs/P1010RDB-PB_NAND_defconfig
@@ -13,7 +13,7 @@ CONFIG_TPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_TPL_MAX_SIZE=0x20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig
index 0f109c514c1..12d92ef8807 100644
--- a/configs/P1010RDB-PB_NOR_defconfig
+++ b/configs/P1010RDB-PB_NOR_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig
index b8e0a92a935..e5d2caa0de0 100644
--- a/configs/P1010RDB-PB_SDCARD_defconfig
+++ b/configs/P1010RDB-PB_SDCARD_defconfig
@@ -11,7 +11,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig
index f403e67b8fe..fc8ae9a3d6e 100644
--- a/configs/P1010RDB-PB_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PB_SPIFLASH_defconfig
@@ -13,7 +13,7 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_L2_CACHE=y
diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig
index 02f0f3cde99..c7a4ac8e519 100644
--- a/configs/P1020RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig
@@ -12,7 +12,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_SPL=y
CONFIG_TPL_MAX_SIZE=0x20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig
index 84cc6bd38e5..7ded32bcae1 100644
--- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig
+++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f80000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig
index 427b67c6722..76e2e54853a 100644
--- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig
+++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig
index e2373d04d74..fa13c807f88 100644
--- a/configs/P1020RDB-PC_36BIT_defconfig
+++ b/configs/P1020RDB-PC_36BIT_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig
index e1e6af7fae0..57862fcea99 100644
--- a/configs/P1020RDB-PC_NAND_defconfig
+++ b/configs/P1020RDB-PC_NAND_defconfig
@@ -12,7 +12,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_SPL=y
CONFIG_TPL_MAX_SIZE=0x20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig
index d9477f1c339..bba95ed33df 100644
--- a/configs/P1020RDB-PC_SDCARD_defconfig
+++ b/configs/P1020RDB-PC_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f80000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig
index f27c9c3835d..419dd6f1b40 100644
--- a/configs/P1020RDB-PC_SPIFLASH_defconfig
+++ b/configs/P1020RDB-PC_SPIFLASH_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig
index ca828eac03d..9ca1294c6ff 100644
--- a/configs/P1020RDB-PC_defconfig
+++ b/configs/P1020RDB-PC_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y
diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig
index 1d364fef2aa..a6c5f96f13c 100644
--- a/configs/P1020RDB-PD_NAND_defconfig
+++ b/configs/P1020RDB-PD_NAND_defconfig
@@ -12,7 +12,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_SPL=y
CONFIG_TPL_MAX_SIZE=0x20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PD=y
diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig
index 4dc2457c1c7..641793143d1 100644
--- a/configs/P1020RDB-PD_SDCARD_defconfig
+++ b/configs/P1020RDB-PD_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f80000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PD=y
diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig
index bf6d2235b36..f023880f91c 100644
--- a/configs/P1020RDB-PD_SPIFLASH_defconfig
+++ b/configs/P1020RDB-PD_SPIFLASH_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PD=y
diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig
index 5377aba4ef3..ec025fc332d 100644
--- a/configs/P1020RDB-PD_defconfig
+++ b/configs/P1020RDB-PD_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PD=y
diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig
index 7646e9054b8..491f63e7bff 100644
--- a/configs/P2020RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig
@@ -12,7 +12,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_SPL=y
CONFIG_TPL_MAX_SIZE=0x20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig
index 81512593da5..464c35a7d5e 100644
--- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig
+++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f80000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig
index 3f106c60139..3b9e67e12ef 100644
--- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig
+++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig
index d266ce82a59..ddb20ca5181 100644
--- a/configs/P2020RDB-PC_36BIT_defconfig
+++ b/configs/P2020RDB-PC_36BIT_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc_36b"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig
index 11d59d14fe4..44056761a65 100644
--- a/configs/P2020RDB-PC_NAND_defconfig
+++ b/configs/P2020RDB-PC_NAND_defconfig
@@ -12,7 +12,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_TPL_SERIAL=y
CONFIG_SPL=y
CONFIG_TPL_MAX_SIZE=0x20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig
index 9416d93c533..d85b38e3d67 100644
--- a/configs/P2020RDB-PC_SDCARD_defconfig
+++ b/configs/P2020RDB-PC_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f80000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig
index 74d26f1f1a9..c5a226d06e5 100644
--- a/configs/P2020RDB-PC_SPIFLASH_defconfig
+++ b/configs/P2020RDB-PC_SPIFLASH_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig
index 4d5569c5549..d7f4449c556 100644
--- a/configs/P2020RDB-PC_defconfig
+++ b/configs/P2020RDB-PC_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y
diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig
index bf3365a4800..39e909bf96f 100644
--- a/configs/P2041RDB_NAND_defconfig
+++ b/configs/P2041RDB_NAND_defconfig
@@ -4,7 +4,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig
index 69f30d427f7..db53a06b965 100644
--- a/configs/P2041RDB_SDCARD_defconfig
+++ b/configs/P2041RDB_SDCARD_defconfig
@@ -4,7 +4,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xCF400
CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig
index c2dc0f21eeb..ec0268dd745 100644
--- a/configs/P2041RDB_SPIFLASH_defconfig
+++ b/configs/P2041RDB_SPIFLASH_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig
index 306432e41b1..02cfe59feed 100644
--- a/configs/P2041RDB_defconfig
+++ b/configs/P2041RDB_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig
index bedea018ddc..f8843df20c2 100644
--- a/configs/T1024RDB_NAND_defconfig
+++ b/configs/T1024RDB_NAND_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T1024RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig
index f06bb02a27c..4674d2bd669 100644
--- a/configs/T1024RDB_SDCARD_defconfig
+++ b/configs/T1024RDB_SDCARD_defconfig
@@ -11,7 +11,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T1024RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig
index 4f91dce1094..24e6a6cb9e8 100644
--- a/configs/T1024RDB_SPIFLASH_defconfig
+++ b/configs/T1024RDB_SPIFLASH_defconfig
@@ -13,7 +13,7 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T1024RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig
index c9d771e44bf..acee4e2aef8 100644
--- a/configs/T1024RDB_defconfig
+++ b/configs/T1024RDB_defconfig
@@ -5,7 +5,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T1024RDB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig
index a55797eb9e4..700614e3a20 100644
--- a/configs/T1042D4RDB_NAND_defconfig
+++ b/configs/T1042D4RDB_NAND_defconfig
@@ -9,7 +9,7 @@ CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T1042D4RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig
index 2f5a1a329d0..288f41b0020 100644
--- a/configs/T1042D4RDB_SDCARD_defconfig
+++ b/configs/T1042D4RDB_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T1042D4RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig
index afce81b1076..3c042483e59 100644
--- a/configs/T1042D4RDB_SPIFLASH_defconfig
+++ b/configs/T1042D4RDB_SPIFLASH_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T1042D4RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig
index 29b240fc147..ee87a349fe1 100644
--- a/configs/T1042D4RDB_defconfig
+++ b/configs/T1042D4RDB_defconfig
@@ -4,7 +4,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T1042D4RDB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig
index ca960d368bd..a579998ef2a 100644
--- a/configs/T2080QDS_NAND_defconfig
+++ b/configs/T2080QDS_NAND_defconfig
@@ -9,7 +9,7 @@ CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig
index eba73ee989f..e214fe55215 100644
--- a/configs/T2080QDS_SDCARD_defconfig
+++ b/configs/T2080QDS_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig
index ae98a3586b7..dc4686c0818 100644
--- a/configs/T2080QDS_SECURE_BOOT_defconfig
+++ b/configs/T2080QDS_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@ CONFIG_PPC=y
CONFIG_TEXT_BASE=0xEFF40000
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig
index 76a1e583007..1933f2a8ed4 100644
--- a/configs/T2080QDS_SPIFLASH_defconfig
+++ b/configs/T2080QDS_SPIFLASH_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
index fe440a469f9..475cd65ca66 100644
--- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
+++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
@@ -3,7 +3,7 @@ CONFIG_TEXT_BASE=0xFFF40000
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_ENV_ADDR=0xFFE20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig
index f4f90d5ab22..7c7f910eb2b 100644
--- a/configs/T2080QDS_defconfig
+++ b/configs/T2080QDS_defconfig
@@ -4,7 +4,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_SYS_SRIO=y
CONFIG_SRIO1=y
diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig
index 18baf568121..d8475fd4051 100644
--- a/configs/T2080RDB_NAND_defconfig
+++ b/configs/T2080RDB_NAND_defconfig
@@ -9,7 +9,7 @@ CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T2080RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig
index df98e33f971..e46e86a2389 100644
--- a/configs/T2080RDB_SDCARD_defconfig
+++ b/configs/T2080RDB_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T2080RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig
index efa48af3bf8..e8a978656a6 100644
--- a/configs/T2080RDB_SPIFLASH_defconfig
+++ b/configs/T2080RDB_SPIFLASH_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T2080RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig
index 8e07b2a09c1..3051bbc3144 100644
--- a/configs/T2080RDB_defconfig
+++ b/configs/T2080RDB_defconfig
@@ -4,7 +4,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T2080RDB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig
index 69bebfacb07..e228fcbda50 100644
--- a/configs/T2080RDB_revD_NAND_defconfig
+++ b/configs/T2080RDB_revD_NAND_defconfig
@@ -9,7 +9,7 @@ CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T2080RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig
index 179fc63705a..4e56142e2ef 100644
--- a/configs/T2080RDB_revD_SDCARD_defconfig
+++ b/configs/T2080RDB_revD_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T2080RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig
index 1d8a6b5f41c..99451afb592 100644
--- a/configs/T2080RDB_revD_SPIFLASH_defconfig
+++ b/configs/T2080RDB_revD_SPIFLASH_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T2080RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig
index a1332a99b43..a0ee406f769 100644
--- a/configs/T2080RDB_revD_defconfig
+++ b/configs/T2080RDB_revD_defconfig
@@ -4,7 +4,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T2080RDB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig
index d906035a2bf..f8122b04276 100644
--- a/configs/T4240RDB_SDCARD_defconfig
+++ b/configs/T4240RDB_SDCARD_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T4240RDB=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig
index d2b270dd44f..62150389ba1 100644
--- a/configs/T4240RDB_defconfig
+++ b/configs/T4240RDB_defconfig
@@ -4,7 +4,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="t4240rdb"
CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_T4240RDB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/kmcent2_defconfig b/configs/kmcent2_defconfig
index d9aae79bc2b..aa18a419c8d 100644
--- a/configs/kmcent2_defconfig
+++ b/configs/kmcent2_defconfig
@@ -7,7 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="kmcent2"
CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020
CONFIG_SYS_CLK_FREQ=66666666
CONFIG_ENV_ADDR=0xebf20000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_TARGET_KMCENT2=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig
index a19d555f7d5..b853a6dbd2b 100644
--- a/configs/qemu-ppce500_defconfig
+++ b/configs/qemu-ppce500_defconfig
@@ -3,7 +3,7 @@ CONFIG_TEXT_BASE=0xf00000
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="qemu-ppce500"
CONFIG_SYS_CLK_FREQ=33000000
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_QEMU_PPCE500=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig
index 46be662037e..ba80ee1b16e 100644
--- a/configs/socrates_defconfig
+++ b/configs/socrates_defconfig
@@ -6,7 +6,7 @@ CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="socrates"
CONFIG_ENV_ADDR=0xFFF40000
# CONFIG_SYS_PCI_64BIT is not set
-CONFIG_MPC85xx=y
+CONFIG_MPC85XX=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_SOCRATES=y
diff --git a/drivers/ata/fsl_sata.c b/drivers/ata/fsl_sata.c
index 972101b29ce..9aad2c6e2ad 100644
--- a/drivers/ata/fsl_sata.c
+++ b/drivers/ata/fsl_sata.c
@@ -78,7 +78,7 @@ static int init_sata(struct fsl_ata_priv *priv, int dev)
return -1;
}
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
if ((dev == 0) && (!is_serdes_configured(SATA1))) {
printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
return -1;
diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig
index 5c928689a30..170f758ade6 100644
--- a/drivers/ddr/fsl/Kconfig
+++ b/drivers/ddr/fsl/Kconfig
@@ -166,7 +166,7 @@ endchoice
endmenu
config FSL_DMA
- def_bool y if DDR_ECC && MPC85xx && !ECC_INIT_VIA_DDRCONTROLLER
+ def_bool y if DDR_ECC && MPC85XX && !ECC_INIT_VIA_DDRCONTROLLER
config DDR_ECC
bool "ECC DDR memory support"
@@ -199,7 +199,7 @@ config SYS_FSL_DDR_INTLV_256B
endif
menu "PowerPC / M68K initial memory controller definitions (FLASH, SDRAM, etc)"
- depends on MCF52x2 || MPC8xx || MPC83XX || MPC85xx
+ depends on MCF52x2 || MPC8xx || MPC83XX || MPC85XX
config SYS_BR0_PRELIM_BOOL
bool "Define Bank 0"
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 8f8c2c864c3..e311d936383 100644
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -1854,7 +1854,7 @@ static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr,
/* clk_adjust in 5-bits on T-series and LS-series */
ddr->ddr_sdram_clk_cntl = (popts->clk_adjust & 0x1F) << 22;
else
- /* clk_adjust in 4-bits on earlier MPC85xx and P-series */
+ /* clk_adjust in 4-bits on earlier MPC85XX and P-series */
ddr->ddr_sdram_clk_cntl = (popts->clk_adjust & 0xF) << 23;
debug("FSLDDR: clk_cntl = 0x%08x\n", ddr->ddr_sdram_clk_cntl);
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen2.c b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c
index b830e7cbd14..cadaaad01eb 100644
--- a/drivers/ddr/fsl/mpc85xx_ddr_gen2.c
+++ b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c
@@ -20,8 +20,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
struct ccsr_ddr __iomem *ddr =
(struct ccsr_ddr __iomem *)CFG_SYS_FSL_DDR_ADDR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85XX)
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
uint svr;
#endif
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
index 1c4a1cae4df..ff57423f57a 100644
--- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
+++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
@@ -33,7 +33,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
int timeout;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
int timeout_save;
- volatile ccsr_local_ecm_t *ecm = (void *)CFG_SYS_MPC85xx_ECM_ADDR;
+ volatile ccsr_local_ecm_t *ecm = (void *)CFG_SYS_MPC85XX_ECM_ADDR;
unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
int csn = -1;
#endif
diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c
index 4f264c83f0c..938ed4429f7 100644
--- a/drivers/dma/fsl_dma.c
+++ b/drivers/dma/fsl_dma.c
@@ -25,8 +25,8 @@
#if defined(CONFIG_MPC83XX)
dma83xx_t *dma_base = (void *)(CFG_SYS_MPC83XX_DMA_ADDR);
-#elif defined(CONFIG_MPC85xx)
-ccsr_dma_t *dma_base = (void *)(CFG_SYS_MPC85xx_DMA_ADDR);
+#elif defined(CONFIG_MPC85XX)
+ccsr_dma_t *dma_base = (void *)(CFG_SYS_MPC85XX_DMA_ADDR);
#elif defined(CONFIG_MPC86xx)
ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR);
#else
@@ -35,7 +35,7 @@ ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR);
static void dma_sync(void)
{
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85XX)
asm("sync; isync; msync");
#elif defined(CONFIG_MPC86xx)
asm("sync; isync");
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 76e19918aad..70ed69b22e1 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -166,7 +166,7 @@ config SYS_I2C_FSL
bool "Freescale I2C bus driver"
help
Add support for Freescale I2C busses as used on MPC8240, MPC8245, and
- MPC85xx processors.
+ MPC85XX processors.
if SYS_I2C_FSL && (SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY)
config SYS_FSL_I2C_OFFSET
diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c
index 1c5543e3c87..0b7d208d704 100644
--- a/drivers/net/fm/b4860.c
+++ b/drivers/net/fm/b4860.c
@@ -25,7 +25,7 @@ u32 port_to_devdisr[] = {
static int is_device_disabled(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 devdisr2 = in_be32(&gur->devdisr2);
return port_to_devdisr[port] & devdisr2;
@@ -33,14 +33,14 @@ static int is_device_disabled(enum fm_port port)
void fman_disable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
void fman_enable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
clrbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
@@ -51,7 +51,7 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
u32 serdes2_prtcl;
char buffer[HWCONFIG_BUFFER_SIZE];
char *buf = NULL;
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#endif
if (is_device_disabled(port))
diff --git a/drivers/net/fm/p1023.c b/drivers/net/fm/p1023.c
index 9013b276bc9..a18e4e9b1f7 100644
--- a/drivers/net/fm/p1023.c
+++ b/drivers/net/fm/p1023.c
@@ -10,13 +10,13 @@
#include <asm/fsl_serdes.h>
static u32 port_to_devdisr[] = {
- [FM1_DTSEC1] = MPC85xx_DEVDISR_TSEC1,
- [FM1_DTSEC2] = MPC85xx_DEVDISR_TSEC2,
+ [FM1_DTSEC1] = MPC85XX_DEVDISR_TSEC1,
+ [FM1_DTSEC2] = MPC85XX_DEVDISR_TSEC2,
};
static int is_device_disabled(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 devdisr = in_be32(&gur->devdisr);
return port_to_devdisr[port] & devdisr;
@@ -24,7 +24,7 @@ static int is_device_disabled(enum fm_port port)
void fman_disable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
/* don't allow disabling of DTSEC1 as its needed for MDIO */
if (port == FM1_DTSEC1)
@@ -35,14 +35,14 @@ void fman_disable_port(enum fm_port port)
void fman_enable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
clrbits_be32(&gur->devdisr, port_to_devdisr[port]);
}
phy_interface_t fman_port_enet_if(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 pordevsr = in_be32(&gur->pordevsr);
if (is_device_disabled(port))
@@ -52,8 +52,8 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
if (port == FM1_DTSEC1) {
if (is_serdes_configured(SGMII_FM1_DTSEC1))
return PHY_INTERFACE_MODE_SGMII;
- if (pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS) {
- if (pordevsr & MPC85xx_PORDEVSR_TSEC1_PRTC)
+ if (pordevsr & MPC85XX_PORDEVSR_SGMII1_DIS) {
+ if (pordevsr & MPC85XX_PORDEVSR_TSEC1_PRTC)
return PHY_INTERFACE_MODE_RGMII;
else
return PHY_INTERFACE_MODE_RMII;
@@ -64,7 +64,7 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
if (port == FM1_DTSEC2) {
if (is_serdes_configured(SGMII_FM1_DTSEC2))
return PHY_INTERFACE_MODE_SGMII;
- if (pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)
+ if (pordevsr & MPC85XX_PORDEVSR_SGMII2_DIS)
return PHY_INTERFACE_MODE_RGMII;
}
diff --git a/drivers/net/fm/p4080.c b/drivers/net/fm/p4080.c
index 7ad993221f7..3e4c2234357 100644
--- a/drivers/net/fm/p4080.c
+++ b/drivers/net/fm/p4080.c
@@ -24,7 +24,7 @@ static u32 port_to_devdisr[] = {
static int is_device_disabled(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 devdisr2 = in_be32(&gur->devdisr2);
return port_to_devdisr[port] & devdisr2;
@@ -32,7 +32,7 @@ static int is_device_disabled(enum fm_port port)
void fman_disable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
/* don't allow disabling of DTSEC1 as its needed for MDIO */
if (port == FM1_DTSEC1)
@@ -43,14 +43,14 @@ void fman_disable_port(enum fm_port port)
void fman_enable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
clrbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
phy_interface_t fman_port_enet_if(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
if (is_device_disabled(port))
diff --git a/drivers/net/fm/p5020.c b/drivers/net/fm/p5020.c
index f931491b112..86f8a55179b 100644
--- a/drivers/net/fm/p5020.c
+++ b/drivers/net/fm/p5020.c
@@ -20,7 +20,7 @@ static u32 port_to_devdisr[] = {
static int is_device_disabled(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 devdisr2 = in_be32(&gur->devdisr2);
return port_to_devdisr[port] & devdisr2;
@@ -28,7 +28,7 @@ static int is_device_disabled(enum fm_port port)
void fman_disable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
/* don't allow disabling of DTSEC1 as its needed for MDIO */
if (port == FM1_DTSEC1)
@@ -39,14 +39,14 @@ void fman_disable_port(enum fm_port port)
void fman_enable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
clrbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
phy_interface_t fman_port_enet_if(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
if (is_device_disabled(port))
diff --git a/drivers/net/fm/p5040.c b/drivers/net/fm/p5040.c
index ef9f4bcce4d..ca3e260082d 100644
--- a/drivers/net/fm/p5040.c
+++ b/drivers/net/fm/p5040.c
@@ -26,7 +26,7 @@ u32 port_to_devdisr[] = {
static int is_device_disabled(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 devdisr2 = in_be32(&gur->devdisr2);
return port_to_devdisr[port] & devdisr2;
@@ -34,7 +34,7 @@ static int is_device_disabled(enum fm_port port)
void fman_disable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
/* don't allow disabling of DTSEC1 as its needed for MDIO */
if (port == FM1_DTSEC1)
@@ -45,14 +45,14 @@ void fman_disable_port(enum fm_port port)
void fman_enable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
clrbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
phy_interface_t fman_port_enet_if(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
if (is_device_disabled(port))
diff --git a/drivers/net/fm/t1024.c b/drivers/net/fm/t1024.c
index 70ab4610cdf..6e20c5d923d 100644
--- a/drivers/net/fm/t1024.c
+++ b/drivers/net/fm/t1024.c
@@ -20,7 +20,7 @@ u32 port_to_devdisr[] = {
static int is_device_disabled(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 devdisr2 = in_be32(&gur->devdisr2);
return port_to_devdisr[port] & devdisr2;
@@ -28,14 +28,14 @@ static int is_device_disabled(enum fm_port port)
void fman_disable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
phy_interface_t fman_port_enet_if(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
if (is_device_disabled(port))
diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c
index 5c260bed7fd..1541d8a6a33 100644
--- a/drivers/net/fm/t1040.c
+++ b/drivers/net/fm/t1040.c
@@ -11,7 +11,7 @@
phy_interface_t fman_port_enet_if(enum fm_port port)
{
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
/* handle RGMII first */
diff --git a/drivers/net/fm/t2080.c b/drivers/net/fm/t2080.c
index 6174934d2b8..d1fec51baed 100644
--- a/drivers/net/fm/t2080.c
+++ b/drivers/net/fm/t2080.c
@@ -28,7 +28,7 @@ u32 port_to_devdisr[] = {
static int is_device_disabled(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 devdisr2 = in_be32(&gur->devdisr2);
return port_to_devdisr[port] & devdisr2;
@@ -36,14 +36,14 @@ static int is_device_disabled(enum fm_port port)
void fman_disable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
phy_interface_t fman_port_enet_if(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
if (is_device_disabled(port))
diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c
index f0a02bfe457..3d129d88362 100644
--- a/drivers/net/fm/t4240.c
+++ b/drivers/net/fm/t4240.c
@@ -35,7 +35,7 @@ u32 port_to_devdisr[] = {
static int is_device_disabled(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 devdisr2 = in_be32(&gur->devdisr2);
return port_to_devdisr[port] & devdisr2;
@@ -43,21 +43,21 @@ static int is_device_disabled(enum fm_port port)
void fman_disable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
void fman_enable_port(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
clrbits_be32(&gur->devdisr2, port_to_devdisr[port]);
}
phy_interface_t fman_port_enet_if(enum fm_port port)
{
- ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CFG_SYS_MPC85XX_GUTS_ADDR);
u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
if (is_device_disabled(port))
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index ef328d26525..5ad5fe916d2 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -150,14 +150,14 @@ config PCIE_FSL
select SYS_FSL_PCI_VER_3_X if ARCH_T2080 || ARCH_T4240
help
Say Y here if you want to enable PCIe controller support on FSL
- PowerPC MPC85xx, MPC86xx, B series, P series and T series SoCs.
+ PowerPC MPC85XX, MPC86xx, B series, P series and T series SoCs.
This driver does not support SRIO_PCIE_BOOT feature.
config PCI_MPC85XX
bool "MPC85XX PowerPC PCI support"
help
Say Y here if you want to enable PCI controller support on FSL
- PowerPC MPC85xx SoC.
+ PowerPC MPC85XX SoC.
config PCI_MSC01
bool "MSC01 PCI support"
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 2825dc6f9aa..2ea6b56516e 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -25,7 +25,7 @@
#include <asm/arch/cpu.h>
#endif
-#define MPC85xx_DEVDISR_QE_DISABLE 0x1
+#define MPC85XX_DEVDISR_QE_DISABLE 0x1
qe_map_t *qe_immr;
#ifdef CONFIG_QE
@@ -469,7 +469,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
#ifdef CONFIG_ARCH_LS1021A
struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
#else
- ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#endif
#endif
if (!firmware) {
@@ -485,7 +485,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
(hdr->magic[2] != 'F')) {
printf("QE microcode not found\n");
#ifdef CONFIG_DEEP_SLEEP
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_QE_DISABLE);
+ setbits_be32(&gur->devdisr, MPC85XX_DEVDISR_QE_DISABLE);
#endif
return -EPERM;
}
@@ -609,7 +609,7 @@ int u_qe_upload_firmware(const struct qe_firmware *firmware)
#ifdef CONFIG_ARCH_LS1021A
struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
#else
- ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#endif
#endif
if (!firmware) {
@@ -625,7 +625,7 @@ int u_qe_upload_firmware(const struct qe_firmware *firmware)
(hdr->magic[2] != 'F')) {
printf("Not a microcode\n");
#ifdef CONFIG_DEEP_SLEEP
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_QE_DISABLE);
+ setbits_be32(&gur->devdisr, MPC85XX_DEVDISR_QE_DISABLE);
#endif
return -EPERM;
}
@@ -718,7 +718,7 @@ int u_qe_firmware_resume(const struct qe_firmware *firmware, qe_map_t *qe_immrr)
const u32 *code;
#ifdef CONFIG_DEEP_SLEEP
#ifdef CONFIG_PPC
- ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
#else
struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
#endif
@@ -733,7 +733,7 @@ int u_qe_firmware_resume(const struct qe_firmware *firmware, qe_map_t *qe_immrr)
if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
(hdr->magic[2] != 'F')) {
#ifdef CONFIG_DEEP_SLEEP
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_QE_DISABLE);
+ setbits_be32(&gur->devdisr, MPC85XX_DEVDISR_QE_DISABLE);
#endif
return -EPERM;
}
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
index b1d964d79d0..5ce9d73570b 100644
--- a/drivers/spi/fsl_espi.c
+++ b/drivers/spi/fsl_espi.c
@@ -390,7 +390,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
if (!fsl)
return NULL;
- fsl->espi = (void *)(CFG_SYS_MPC85xx_ESPI_ADDR);
+ fsl->espi = (void *)(CFG_SYS_MPC85XX_ESPI_ADDR);
fsl->mode = mode;
fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN;
fsl->speed_hz = max_hz;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6213b3c95fa..930e6885cbb 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -291,7 +291,7 @@ config EHCI_HCD_INIT_AFTER_RESET
config USB_EHCI_FSL
bool "Support for FSL on-chip EHCI USB controller"
select EHCI_HCD_INIT_AFTER_RESET
- select SYS_FSL_USB_INTERNAL_UTMI_PHY if MPC85xx && \
+ select SYS_FSL_USB_INTERNAL_UTMI_PHY if MPC85XX && \
!(ARCH_B4860 || ARCH_B4420 || ARCH_P4080 || ARCH_P1020 || ARCH_P2020)
---help---
Enables support for the on-chip EHCI controller on FSL chips.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b5ac8f7f50d..9218de06e22 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -140,10 +140,10 @@ config WDT_BCM6345
config WDT_BOOKE
bool "PowerPC Book-E watchdog driver"
- depends on WDT && MPC85xx
+ depends on WDT && MPC85XX
help
Watchdog driver for PowerPC Book-E chips, such as the Freescale
- MPC85xx SOCs and the IBM PowerPC 440.
+ MPC85XX SOCs and the IBM PowerPC 440.
config WDT_CDNS
bool "Cadence watchdog timer support"
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 9efae58ce90..eec51744696 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -340,7 +340,7 @@ extern unsigned long get_sdram_size(void);
#endif
#ifdef CONFIG_MMC
-#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85XX_ESDHC_ADDR
#endif
/*
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 28f53ae78a1..4f74a1695e0 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -284,7 +284,7 @@
#endif
#ifdef CONFIG_MMC
-#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85XX_ESDHC_ADDR
#endif
/*
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 7ee46abffdb..22b1e750825 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -347,7 +347,7 @@
* SDHC
*/
#ifdef CONFIG_MMC
-#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85XX_ESDHC_ADDR
#endif
/* Qman/Bman */
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index f196bd76e6e..e0d0436c197 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -304,7 +304,7 @@
*/
#ifdef CONFIG_MMC
-#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85XX_ESDHC_ADDR
#endif
/* Qman/Bman */
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 2023d7497f6..43fcf6ff13e 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -389,7 +389,7 @@
* SDHC
*/
#ifdef CONFIG_MMC
-#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85XX_ESDHC_ADDR
#endif
/*
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index f213d2de770..21f06e97a44 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -351,7 +351,7 @@
* SDHC
*/
#ifdef CONFIG_MMC
-#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85XX_ESDHC_ADDR
#endif
/*
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 506f1b7e268..e6daf0ef00c 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -350,7 +350,7 @@
*/
#ifdef CONFIG_MMC
-#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85XX_ESDHC_ADDR
#endif
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index f5bd0913449..7fd68c70fc6 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -373,7 +373,7 @@
*/
#ifdef CONFIG_MMC
-#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85XX_ESDHC_ADDR
#endif
/*
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 2b35be83ec6..5e7317d30a3 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -21,7 +21,7 @@
*/
/*
- * sysclk for MPC85xx
+ * sysclk for MPC85XX
*
* Two valid values are:
* 33000000
diff --git a/include/e500.h b/include/e500.h
index 9f68a834c2f..6343393e5f5 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -38,7 +38,7 @@ typedef struct
#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
unsigned char diff_sysclk;
#endif
-} MPC85xx_SYS_INFO;
+} MPC85XX_SYS_INFO;
#endif /* _ASMLANGUAGE */
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index c43f780e4cd..042faa8b2c3 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -465,7 +465,7 @@ int fsl_dp_resume(void);
* The 85xx boards have a common prototype for fixed_sdram so put the
* declaration here.
*/
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
extern phys_size_t fixed_sdram(void);
#endif
diff --git a/include/fsl_fman.h b/include/fsl_fman.h
index 74acdb25691..f1857a7ef96 100644
--- a/include/fsl_fman.h
+++ b/include/fsl_fman.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * MPC85xx Internal Memory Map
+ * MPC85XX Internal Memory Map
*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
*/
diff --git a/include/ioports.h b/include/ioports.h
index 1cd3ceb37a5..f253e002b0e 100644
--- a/include/ioports.h
+++ b/include/ioports.h
@@ -23,7 +23,7 @@ typedef struct {
* the internal memory map aligns the above structure on
* a 0x20 byte boundary
*/
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
#define ioport_addr(im, idx) (ioport_t *)((uint)&(im->im_cpm_iop) + ((idx)*0x20))
#else
#define ioport_addr(im, idx) (ioport_t *)((uint)&(im)->im_ioport + ((idx)*0x20))
diff --git a/include/mpc85xx.h b/include/mpc85xx.h
index 636734dd3c6..e26e131114c 100644
--- a/include/mpc85xx.h
+++ b/include/mpc85xx.h
@@ -3,8 +3,8 @@
* Copyright(c) 2003 Motorola Inc.
*/
-#ifndef __MPC85xx_H__
-#define __MPC85xx_H__
+#ifndef __MPC85XX_H__
+#define __MPC85XX_H__
#if defined(CONFIG_E500)
#include <e500.h>
@@ -60,4 +60,4 @@ CFG_SYS_CCSRBAR_PHYS_LOW and/or CFG_SYS_CCSRBAR_PHYS_HIGH instead."
#define CFG_SYS_CCSRBAR_PHYS ((CFG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \
CFG_SYS_CCSRBAR_PHYS_LOW)
-#endif /* __MPC85xx_H__ */
+#endif /* __MPC85XX_H__ */
diff --git a/include/pci.h b/include/pci.h
index c55d6107a49..6e58cd9a10b 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -770,7 +770,7 @@ int pci_hose_find_ext_capability(struct pci_controller *hose,
const char * pci_class_str(u8 class);
int pci_last_busno(void);
-#ifdef CONFIG_MPC85xx
+#ifdef CONFIG_MPC85XX
extern void pci_mpc85xx_init (struct pci_controller *hose);
#endif
diff --git a/include/post.h b/include/post.h
index 41120695064..6c036e4fffc 100644
--- a/include/post.h
+++ b/include/post.h
@@ -25,9 +25,9 @@
#include <linux/immap_qe.h>
#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR)
-#elif defined (CONFIG_MPC85xx)
+#elif defined (CONFIG_MPC85XX)
#include <asm/immap_85xx.h>
-#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_PIC_OFFSET + \
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CFG_SYS_MPC85XX_PIC_OFFSET + \
offsetof(ccsr_pic_t, tfrr))
#endif
diff --git a/include/serial.h b/include/serial.h
index ceab714f541..22ac1043d36 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -27,7 +27,7 @@ extern struct serial_device serial_smh_device;
extern struct serial_device serial_scc_device;
extern struct serial_device *default_serial_console(void);
-#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || \
+#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85XX) || \
defined(CONFIG_MPC86xx) || \
defined(CONFIG_ARCH_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \
defined(CONFIG_MICROBLAZE)
diff --git a/include/watchdog.h b/include/watchdog.h
index ac5f11e376f..ddc81cd6c76 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -40,7 +40,7 @@ int init_func_watchdog_reset(void);
void hw_watchdog_init(void);
#endif
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85XX)
void init_85xx_watchdog(void);
#endif
#endif /* _WATCHDOG_H_ */
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 42/87] powerpc: Rename MPC86xx
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (40 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 41/87] ppc: Rename MPC85xx Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 43/87] imx: Rename CONFIG_MXS to CFG_MXS Simon Glass
` (45 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Tom Rini, Simon Glass, Andy Fleming, Mario Six, Priyanka Jain,
Stefan Roese, Wolfgang Denk
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
api/api_platform-powerpc.c | 2 +-
arch/powerpc/cpu/Makefile | 2 +-
arch/powerpc/cpu/mpc8xxx/Makefile | 2 +-
arch/powerpc/cpu/mpc8xxx/cpu.c | 2 +-
arch/powerpc/cpu/mpc8xxx/fdt.c | 4 ++--
arch/powerpc/cpu/mpc8xxx/srio.c | 8 ++++----
arch/powerpc/include/asm/config.h | 2 +-
arch/powerpc/include/asm/fsl_pci.h | 2 +-
arch/powerpc/include/asm/global_data.h | 6 +++---
arch/powerpc/include/asm/ppc.h | 6 +++---
arch/powerpc/include/asm/processor.h | 8 ++++----
arch/powerpc/lib/bdinfo.c | 2 +-
arch/powerpc/lib/bootm.c | 2 +-
arch/powerpc/lib/ppccache.S | 4 ++--
arch/powerpc/lib/stack.c | 2 +-
board/xes/common/Makefile | 4 ++--
board/xes/common/fsl_8xxx_clk.c | 2 +-
board/xes/common/fsl_8xxx_misc.c | 2 +-
common/board_r.c | 2 +-
drivers/ddr/fsl/Kconfig | 4 ++--
drivers/dma/fsl_dma.c | 6 +++---
drivers/pci/Kconfig | 2 +-
env/Kconfig | 2 +-
include/asm-generic/u-boot.h | 2 +-
include/mpc86xx.h | 8 ++++----
include/serial.h | 2 +-
26 files changed, 45 insertions(+), 45 deletions(-)
diff --git a/api/api_platform-powerpc.c b/api/api_platform-powerpc.c
index 8503ba274d6..905c7d76bfd 100644
--- a/api/api_platform-powerpc.c
+++ b/api/api_platform-powerpc.c
@@ -29,7 +29,7 @@ int platform_sys_info(struct sys_info *si)
si->clk_bus = gd->bus_clk;
si->clk_cpu = gd->cpu_clk;
-#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86XX)
#define bi_bar bi_immr_base
#elif defined(CONFIG_MPC83XX)
#define bi_bar bi_immrbar
diff --git a/arch/powerpc/cpu/Makefile b/arch/powerpc/cpu/Makefile
index 914f95ca674..69ca4a1a77a 100644
--- a/arch/powerpc/cpu/Makefile
+++ b/arch/powerpc/cpu/Makefile
@@ -2,4 +2,4 @@
obj-$(CONFIG_MPC83XX) += mpc8xxx/
obj-$(CONFIG_MPC85XX) += mpc8xxx/
-obj-$(CONFIG_MPC86xx) += mpc8xxx/
+obj-$(CONFIG_MPC86XX) += mpc8xxx/
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index abcde571ac2..84cb7dd4d92 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_FSL_LAW) += law.o
else
obj-$(CONFIG_MPC85XX) += cpu.o
-obj-$(CONFIG_MPC86xx) += cpu.o
+obj-$(CONFIG_MPC86XX) += cpu.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index d4a91622d34..4e4f5aa0c5e 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -94,7 +94,7 @@ static struct cpu_type cpu_type_list[] = {
CPU_TYPE_ENTRY(C291, C291, 1),
CPU_TYPE_ENTRY(C292, C292, 1),
CPU_TYPE_ENTRY(C293, C293, 1),
-#elif defined(CONFIG_MPC86xx)
+#elif defined(CONFIG_MPC86XX)
CPU_TYPE_ENTRY(8610, 8610, 1),
CPU_TYPE_ENTRY(8641, 8641, 2),
CPU_TYPE_ENTRY(8641D, 8641D, 2),
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 6055f986b8b..3130bdd9acc 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -17,7 +17,7 @@
#include <phy.h>
#include <hwconfig.h>
-#if defined(CONFIG_MP) && (defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx))
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86XX))
static int ft_del_cpuhandle(void *blob, int cpuhandle)
{
int off, ret = -FDT_ERR_NOTFOUND;
@@ -69,7 +69,7 @@ void ft_fixup_num_cores(void *blob) {
debug ("deleted %d extra core entry entries from device tree\n",
del_cores);
}
-#endif /* defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx) */
+#endif /* defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86XX) */
int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index 89ee4ea1ac2..be6e46dcbcf 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -39,10 +39,10 @@
#define _DEVDISR_SRIO2 MPC85XX_DEVDISR_SRIO
#define _DEVDISR_RMU MPC85XX_DEVDISR_RMSG
#define CFG_SYS_MPC8xxx_GUTS_ADDR CFG_SYS_MPC85XX_GUTS_ADDR
-#elif defined(CONFIG_MPC86xx)
- #define _DEVDISR_SRIO1 MPC86xx_DEVDISR_SRIO
- #define _DEVDISR_SRIO2 MPC86xx_DEVDISR_SRIO
- #define _DEVDISR_RMU MPC86xx_DEVDISR_RMSG
+#elif defined(CONFIG_MPC86XX)
+ #define _DEVDISR_SRIO1 MPC86XX_DEVDISR_SRIO
+ #define _DEVDISR_SRIO2 MPC86XX_DEVDISR_SRIO
+ #define _DEVDISR_RMU MPC86XX_DEVDISR_RMSG
#define CFG_SYS_MPC8xxx_GUTS_ADDR \
(&((immap_t *)CONFIG_SYS_IMMR)->im_gur)
#else
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 3d411eb8661..78563716df2 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -16,7 +16,7 @@
#ifndef CFG_MAX_MEM_MAPPED
#if defined(CONFIG_E500) || \
- defined(CONFIG_MPC86xx) || \
+ defined(CONFIG_MPC86XX) || \
defined(CONFIG_E300)
#define CFG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
#else
diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h
index c2f12d76521..c45ac92e509 100644
--- a/arch/powerpc/include/asm/fsl_pci.h
+++ b/arch/powerpc/include/asm/fsl_pci.h
@@ -258,7 +258,7 @@ int fsl_pcie_init_board(int busno);
FT_FSL_PCIE1_SETUP; \
FT_FSL_PCIE2_SETUP; \
FT_FSL_PCIE3_SETUP;
-#elif defined(CONFIG_MPC86xx)
+#elif defined(CONFIG_MPC86XX)
#define FSL_PCI_COMPAT "fsl,mpc8610-pci"
#define FSL_PCIE_COMPAT "fsl,mpc8641-pcie"
#define FT_FSL_PCI_SETUP \
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 404980c1f47..ec1aa489f8d 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -53,12 +53,12 @@ struct arch_global_data {
# endif /* CONFIG_ARCH_MPC8360 */
#endif
#endif
-#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86XX)
u32 lbc_clk;
void *cpu;
-#endif /* CONFIG_MPC85XX || CONFIG_MPC86xx */
+#endif /* CONFIG_MPC85XX || CONFIG_MPC86XX */
#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85XX) || \
- defined(CONFIG_MPC86xx)
+ defined(CONFIG_MPC86XX)
u32 i2c1_clk;
u32 i2c2_clk;
#endif
diff --git a/arch/powerpc/include/asm/ppc.h b/arch/powerpc/include/asm/ppc.h
index 708cd3920cc..b41ab6441c8 100644
--- a/arch/powerpc/include/asm/ppc.h
+++ b/arch/powerpc/include/asm/ppc.h
@@ -51,7 +51,7 @@ static inline uint get_svr(void)
}
#if defined(CONFIG_MPC85XX) || \
- defined(CONFIG_MPC86xx) || \
+ defined(CONFIG_MPC86XX) || \
defined(CONFIG_MPC83XX)
unsigned char in8(unsigned int);
void out8(unsigned int, unsigned char);
@@ -84,9 +84,9 @@ void get_sys_info(sys_info_t *);
void ft_fixup_cpu(void *, u64);
void ft_fixup_num_cores(void *);
#endif
-#if defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC86XX)
ulong get_bus_freq(ulong);
-typedef MPC86xx_SYS_INFO sys_info_t;
+typedef MPC86XX_SYS_INFO sys_info_t;
void get_sys_info(sys_info_t *);
static inline ulong get_ddr_freq(ulong dummy)
{
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 2bb2af2cb64..668ba618252 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -569,7 +569,7 @@
#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
#define ESR_ST 0x00800000 /* Store Operation */
-#if defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC86XX)
#define SPRN_MSSCR0 0x3f6
#define SPRN_MSSSR0 0x3f7
#endif
@@ -646,10 +646,10 @@
#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
#define LR SPRN_LR
#define MBAR SPRN_MBAR /* System memory base address */
-#if defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC86XX)
#define MSSCR0 SPRN_MSSCR0
#endif
-#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_E500) || defined(CONFIG_MPC86XX)
#define PIR SPRN_PIR
#endif
#define SVR SPRN_SVR /* System-On-Chip Version Register */
@@ -1156,7 +1156,7 @@ int fixup_cpu(void);
int fsl_qoriq_core_to_cluster(unsigned int core);
int fsl_qoriq_dsp_core_to_cluster(unsigned int core);
-#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86XX)
#define CPU_TYPE_ENTRY(n, v, nc) \
{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), \
.mask = (1 << (nc)) - 1 }
diff --git a/arch/powerpc/lib/bdinfo.c b/arch/powerpc/lib/bdinfo.c
index 81cbcf988ff..b838d5a1db8 100644
--- a/arch/powerpc/lib/bdinfo.c
+++ b/arch/powerpc/lib/bdinfo.c
@@ -16,7 +16,7 @@ int arch_setup_bdinfo(void)
{
struct bd_info *bd = gd->bd;
-#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_E500) || defined(CONFIG_MPC86XX)
bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
#endif
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index e5324bf8fc1..ef1d5af8908 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -293,7 +293,7 @@ void boot_prep_vxworks(struct bootm_headers *images)
#if defined(CONFIG_MPC85XX)
ft_fixup_cpu(images->ft_addr, base + size);
ft_fixup_num_cores(images->ft_addr);
-#elif defined(CONFIG_MPC86xx)
+#elif defined(CONFIG_MPC86XX)
off = fdt_add_mem_rsv(images->ft_addr,
determine_mp_bootpg(NULL), (u64)4096);
if (off < 0)
diff --git a/arch/powerpc/lib/ppccache.S b/arch/powerpc/lib/ppccache.S
index 472548d494d..52f53e93a30 100644
--- a/arch/powerpc/lib/ppccache.S
+++ b/arch/powerpc/lib/ppccache.S
@@ -64,7 +64,7 @@ ppcSync:
* flush_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(flush_dcache_range)
-#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86XX)
li r5,L1_CACHE_BYTES-1
andc r3,r3,r5
subf r4,r3,r4
@@ -88,7 +88,7 @@ _GLOBAL(flush_dcache_range)
* invalidate_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(invalidate_dcache_range)
-#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86XX)
li r5,L1_CACHE_BYTES-1
andc r3,r3,r5
subf r4,r3,r4
diff --git a/arch/powerpc/lib/stack.c b/arch/powerpc/lib/stack.c
index 2e731aa8701..4d0f3b31daa 100644
--- a/arch/powerpc/lib/stack.c
+++ b/arch/powerpc/lib/stack.c
@@ -34,7 +34,7 @@ int arch_reserve_stacks(void)
int arch_setup_dest_addr(void)
{
-#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC86XX) || defined(CONFIG_E500))
/*
* We need to make sure the location we intend to put secondary core
* boot code is reserved and not used by any part of u-boot
diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile
index 6be05152aa4..d6f09f71b75 100644
--- a/board/xes/common/Makefile
+++ b/board/xes/common/Makefile
@@ -3,8 +3,8 @@
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-obj-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o
+obj-$(CONFIG_MPC86XX) += fsl_8xxx_clk.o
obj-$(CONFIG_ARCH_P2020) += fsl_8xxx_clk.o
obj-$(CONFIG_MPC85XX) += fsl_8xxx_misc.o board.o
-obj-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o
+obj-$(CONFIG_MPC86XX) += fsl_8xxx_misc.o board.o
obj-$(CONFIG_NAND_ACTL) += actl_nand.o
diff --git a/board/xes/common/fsl_8xxx_clk.c b/board/xes/common/fsl_8xxx_clk.c
index ef720c17240..0e6dc6e2108 100644
--- a/board/xes/common/fsl_8xxx_clk.c
+++ b/board/xes/common/fsl_8xxx_clk.c
@@ -14,7 +14,7 @@ unsigned long get_board_sys_clk(void)
{
#if defined(CONFIG_MPC85XX)
volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85XX_GUTS_ADDR);
-#elif defined(CONFIG_MPC86xx)
+#elif defined(CONFIG_MPC86XX)
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
#endif
diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c
index 3082acaaa04..03dedef9e12 100644
--- a/board/xes/common/fsl_8xxx_misc.c
+++ b/board/xes/common/fsl_8xxx_misc.c
@@ -29,7 +29,7 @@ uint get_board_derivative(void)
{
#if defined(CONFIG_MPC85XX)
volatile ccsr_gur_t *gur = (void *)CFG_SYS_MPC85XX_GUTS_ADDR;
-#elif defined(CONFIG_MPC86xx)
+#elif defined(CONFIG_MPC86XX)
volatile immap_t *immap = (immap_t *)CFG_SYS_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
#endif
diff --git a/common/board_r.c b/common/board_r.c
index e4a5c88cdd4..552b9899323 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -130,7 +130,7 @@ static int initr_reloc_global_data(void)
#elif !defined(CONFIG_SANDBOX) && !defined(CONFIG_NIOS2)
monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
#endif
-#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC85XX) || defined(CONFIG_MPC86XX)
/*
* The gd->cpu pointer is set to an address in flash before relocation.
* We need to update it to point to the same CPU entry in RAM.
diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig
index 170f758ade6..4d2791e4796 100644
--- a/drivers/ddr/fsl/Kconfig
+++ b/drivers/ddr/fsl/Kconfig
@@ -96,7 +96,7 @@ config SYS_FSL_DDRC_GEN1
config SYS_FSL_DDRC_GEN2
bool
- depends on !MPC86xx
+ depends on !MPC86XX
help
Enable Freescale DDR2 controller.
@@ -153,7 +153,7 @@ config SYS_FSL_DDR2
bool "Freescale DDR2 controller"
depends on SYS_FSL_HAS_DDR2
imply DDR_SPD
- select SYS_FSL_DDRC_GEN2 if (!MPC86xx && !SYS_FSL_DDRC_GEN3)
+ select SYS_FSL_DDRC_GEN2 if (!MPC86XX && !SYS_FSL_DDRC_GEN3)
config SYS_FSL_DDR1
bool "Freescale DDR1 controller"
diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c
index 938ed4429f7..b3378e855bb 100644
--- a/drivers/dma/fsl_dma.c
+++ b/drivers/dma/fsl_dma.c
@@ -27,8 +27,8 @@
dma83xx_t *dma_base = (void *)(CFG_SYS_MPC83XX_DMA_ADDR);
#elif defined(CONFIG_MPC85XX)
ccsr_dma_t *dma_base = (void *)(CFG_SYS_MPC85XX_DMA_ADDR);
-#elif defined(CONFIG_MPC86xx)
-ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR);
+#elif defined(CONFIG_MPC86XX)
+ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86XX_DMA_ADDR);
#else
#error "Freescale DMA engine not supported on your processor"
#endif
@@ -37,7 +37,7 @@ static void dma_sync(void)
{
#if defined(CONFIG_MPC85XX)
asm("sync; isync; msync");
-#elif defined(CONFIG_MPC86xx)
+#elif defined(CONFIG_MPC86XX)
asm("sync; isync");
#endif
}
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 5ad5fe916d2..ee0dc023165 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -150,7 +150,7 @@ config PCIE_FSL
select SYS_FSL_PCI_VER_3_X if ARCH_T2080 || ARCH_T4240
help
Say Y here if you want to enable PCIe controller support on FSL
- PowerPC MPC85XX, MPC86xx, B series, P series and T series SoCs.
+ PowerPC MPC85XX, MPC86XX, B series, P series and T series SoCs.
This driver does not support SRIO_PCIE_BOOT feature.
config PCI_MPC85XX
diff --git a/env/Kconfig b/env/Kconfig
index e377d88eb2a..9222330a676 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -116,7 +116,7 @@ config ENV_IS_IN_FLASH
default y if ARCH_INTEGRATOR_CP
default y if M548x || M547x || M5282
default y if MCF532X || MCF52x2
- default y if MPC86xx || MPC83XX
+ default y if MPC86XX || MPC83XX
default y if ARCH_MPC8548
default y if SH && !CPU_SH4
help
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index 64dfb66c7cb..59c1802272d 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -37,7 +37,7 @@ struct bd_info {
unsigned long bi_dsp_freq; /* dsp core frequency */
unsigned long bi_ddr_freq; /* ddr frequency */
#endif
-#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86XX)
unsigned long bi_immr_base; /* base of IMMR register */
#endif
#if defined(CONFIG_M68K)
diff --git a/include/mpc86xx.h b/include/mpc86xx.h
index ea8d17d557e..3c1e2a5180f 100644
--- a/include/mpc86xx.h
+++ b/include/mpc86xx.h
@@ -4,8 +4,8 @@
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*/
-#ifndef __MPC86xx_H__
-#define __MPC86xx_H__
+#ifndef __MPC86XX_H__
+#define __MPC86XX_H__
#include <asm/fsl_lbc.h>
@@ -44,7 +44,7 @@ typedef struct {
unsigned long freq_processor;
unsigned long freq_systembus;
unsigned long freq_localbus;
-} MPC86xx_SYS_INFO;
+} MPC86XX_SYS_INFO;
#define l1icache_enable icache_enable
@@ -87,4 +87,4 @@ void setup_ddr_bat(phys_addr_t dram_size);
extern void setup_bats(void);
#endif /* _ASMLANGUAGE */
-#endif /* __MPC86xx_H__ */
+#endif /* __MPC86XX_H__ */
diff --git a/include/serial.h b/include/serial.h
index 22ac1043d36..5c8be294bf6 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -28,7 +28,7 @@ extern struct serial_device serial_scc_device;
extern struct serial_device *default_serial_console(void);
#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85XX) || \
- defined(CONFIG_MPC86xx) || \
+ defined(CONFIG_MPC86XX) || \
defined(CONFIG_ARCH_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \
defined(CONFIG_MICROBLAZE)
extern struct serial_device serial0_device;
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 43/87] imx: Rename CONFIG_MXS to CFG_MXS
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (41 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 42/87] powerpc: Rename MPC86xx Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 44/87] nand: Drop unused actl_nand driver Simon Glass
` (44 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Stefano Babic
This is not a Kconfig option so we should not be setting it in the
Makefile. Rename it to use a CFS_ prefix, since this is still used in
mxsimage.c
In general tools should support all the features without reference to
CONFIG options, but this is left to the maintainer to look at.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/Makefile | 4 ++--
tools/mxsimage.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/Makefile b/tools/Makefile
index edfa40903d9..2ee43dff542 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -158,9 +158,9 @@ fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o
file2include-objs := file2include.o
ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_TOOLS_LIBCRYPTO),)
-# Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
+# Add CFG_MXS into host CFLAGS, so we can check whether or not register
# the mxsimage support within tools/mxsimage.c .
-HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS
+HOSTCFLAGS_mxsimage.o += -DCFG_MXS
endif
ifdef CONFIG_TOOLS_LIBCRYPTO
diff --git a/tools/mxsimage.c b/tools/mxsimage.c
index fee022aab46..fbe46c47fae 100644
--- a/tools/mxsimage.c
+++ b/tools/mxsimage.c
@@ -5,7 +5,7 @@
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
*/
-#ifdef CONFIG_MXS
+#ifdef CFG_MXS
#include <errno.h>
#include <fcntl.h>
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 44/87] nand: Drop unused actl_nand driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (42 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 43/87] imx: Rename CONFIG_MXS to CFG_MXS Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 45/87] mtd: Drop unused fsl_upm driver Simon Glass
` (43 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used since this commit:
ed7fe2bee12 ppc: Remove xpedite boards
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/xes/common/Makefile | 1 -
board/xes/common/actl_nand.c | 49 ------------------------------------
2 files changed, 50 deletions(-)
delete mode 100644 board/xes/common/actl_nand.c
diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile
index d6f09f71b75..b139ee9f759 100644
--- a/board/xes/common/Makefile
+++ b/board/xes/common/Makefile
@@ -7,4 +7,3 @@ obj-$(CONFIG_MPC86XX) += fsl_8xxx_clk.o
obj-$(CONFIG_ARCH_P2020) += fsl_8xxx_clk.o
obj-$(CONFIG_MPC85XX) += fsl_8xxx_misc.o board.o
obj-$(CONFIG_MPC86XX) += fsl_8xxx_misc.o board.o
-obj-$(CONFIG_NAND_ACTL) += actl_nand.o
diff --git a/board/xes/common/actl_nand.c b/board/xes/common/actl_nand.c
deleted file mode 100644
index 2d8a57576a6..00000000000
--- a/board/xes/common/actl_nand.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2008 Extreme Engineering Solutions, Inc.
- *
- * This driver support NAND devices which have address lines
- * connected as ALE and CLE inputs.
- */
-
-#include <common.h>
-#include <nand.h>
-#include <linux/mtd/rawnand.h>
-#include <asm/io.h>
-
-/*
- * Hardware specific access to control-lines
- */
-static void nand_addr_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
-{
- struct nand_chip *this = mtd_to_nand(mtd);
- ulong IO_ADDR_W;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- IO_ADDR_W = (ulong)this->IO_ADDR_W;
-
- IO_ADDR_W &= ~(CONFIG_SYS_NAND_ACTL_CLE |
- CONFIG_SYS_NAND_ACTL_ALE |
- CONFIG_SYS_NAND_ACTL_NCE);
- if (ctrl & NAND_CLE)
- IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_CLE;
- if (ctrl & NAND_ALE)
- IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_ALE;
- if (ctrl & NAND_NCE)
- IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_NCE;
-
- this->IO_ADDR_W = (void *)IO_ADDR_W;
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->cmd_ctrl = nand_addr_hwcontrol;
- nand->chip_delay = CONFIG_SYS_NAND_ACTL_DELAY;
-
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 45/87] mtd: Drop unused fsl_upm driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (43 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 44/87] nand: Drop unused actl_nand driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 46/87] mtd: Drop unused fsmc_nand driver Simon Glass
` (42 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Michael Trimarchi
This is not used since this commit:
8d1e3cb1400 powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
---
(no changes since v1)
drivers/mtd/nand/raw/Makefile | 1 -
drivers/mtd/nand/raw/fsl_upm.c | 187 ---------------------------------
include/linux/mtd/fsl_upm.h | 44 --------
3 files changed, 232 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/fsl_upm.c
delete mode 100644 include/linux/mtd/fsl_upm.h
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 4c59903aa8c..e8764cf358b 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_NAND_DENALI) += denali.o
obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
-obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
deleted file mode 100644
index 91cc1339537..00000000000
--- a/drivers/mtd/nand/raw/fsl_upm.c
+++ /dev/null
@@ -1,187 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * FSL UPM NAND driver
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- * Anton Vorontsov <avorontsov@ru.mvista.com>
- */
-
-#include <config.h>
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/fsl_upm.h>
-#include <nand.h>
-
-static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
-{
- clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
- (void)in_be32(upm->mxmr);
-}
-
-static void fsl_upm_end_pattern(struct fsl_upm *upm)
-{
- clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
-
- while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
- eieio();
-}
-
-static void fsl_upm_run_pattern(struct fsl_upm *upm, int width,
- void __iomem *io_addr, u32 mar)
-{
- out_be32(upm->mar, mar);
- (void)in_be32(upm->mar);
- switch (width) {
- case 8:
- out_8(io_addr, 0x0);
- break;
- case 16:
- out_be16(io_addr, 0x0);
- break;
- case 32:
- out_be32(io_addr, 0x0);
- break;
- }
-}
-
-static void fun_wait(struct fsl_upm_nand *fun)
-{
- if (fun->dev_ready) {
- while (!fun->dev_ready(fun->chip_nr))
- debug("unexpected busy state\n");
- } else {
- /*
- * If the R/B pin is not connected,
- * a short delay is necessary.
- */
- udelay(1);
- }
-}
-
-#if CONFIG_SYS_NAND_MAX_CHIPS > 1
-static void fun_select_chip(struct mtd_info *mtd, int chip_nr)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_upm_nand *fun = nand_get_controller_data(chip);
-
- if (chip_nr >= 0) {
- fun->chip_nr = chip_nr;
- chip->IO_ADDR_R = chip->IO_ADDR_W =
- fun->upm.io_addr + fun->chip_offset * chip_nr;
- } else if (chip_nr == -1) {
- chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
- }
-}
-#endif
-
-static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_upm_nand *fun = nand_get_controller_data(chip);
- void __iomem *io_addr;
- u32 mar;
-
- if (!(ctrl & fun->last_ctrl)) {
- fsl_upm_end_pattern(&fun->upm);
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- fun->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
- }
-
- if (ctrl & NAND_CTRL_CHANGE) {
- if (ctrl & NAND_ALE)
- fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
- else if (ctrl & NAND_CLE)
- fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
- }
-
- mar = cmd << (32 - fun->width);
- io_addr = fun->upm.io_addr;
-#if CONFIG_SYS_NAND_MAX_CHIPS > 1
- if (fun->chip_nr > 0) {
- io_addr += fun->chip_offset * fun->chip_nr;
- if (fun->upm_mar_chip_offset)
- mar |= fun->upm_mar_chip_offset * fun->chip_nr;
- }
-#endif
- fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
-
- /*
- * Some boards/chips needs this. At least the MPC8360E-RDK
- * needs it. Probably weird chip, because I don't see any
- * need for this on MPC8555E + Samsung K9F1G08U0A. Usually
- * here are 0-2 unexpected busy states per block read.
- */
- if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
- fun_wait(fun);
-}
-
-static u8 upm_nand_read_byte(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- return in_8(chip->IO_ADDR_R);
-}
-
-static void upm_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
- int i;
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_upm_nand *fun = nand_get_controller_data(chip);
-
- for (i = 0; i < len; i++) {
- out_8(chip->IO_ADDR_W, buf[i]);
- if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BYTE)
- fun_wait(fun);
- }
-
- if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BUFFER)
- fun_wait(fun);
-}
-
-static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
- int i;
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- for (i = 0; i < len; i++)
- buf[i] = in_8(chip->IO_ADDR_R);
-}
-
-static int nand_dev_ready(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_upm_nand *fun = nand_get_controller_data(chip);
-
- return fun->dev_ready(fun->chip_nr);
-}
-
-int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
-{
- if (fun->width != 8 && fun->width != 16 && fun->width != 32)
- return -ENOSYS;
-
- fun->last_ctrl = NAND_CLE;
-
- nand_set_controller_data(chip, fun);
- chip->chip_delay = fun->chip_delay;
- chip->ecc.mode = NAND_ECC_SOFT;
- chip->cmd_ctrl = fun_cmd_ctrl;
-#if CONFIG_SYS_NAND_MAX_CHIPS > 1
- chip->select_chip = fun_select_chip;
-#endif
- chip->read_byte = upm_nand_read_byte;
- chip->read_buf = upm_nand_read_buf;
- chip->write_buf = upm_nand_write_buf;
- if (fun->dev_ready)
- chip->dev_ready = nand_dev_ready;
-
- return 0;
-}
diff --git a/include/linux/mtd/fsl_upm.h b/include/linux/mtd/fsl_upm.h
deleted file mode 100644
index 9999993543b..00000000000
--- a/include/linux/mtd/fsl_upm.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * FSL UPM NAND driver
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- * Anton Vorontsov <avorontsov@ru.mvista.com>
- */
-
-#ifndef __LINUX_MTD_NAND_FSL_UPM
-#define __LINUX_MTD_NAND_FSL_UPM
-
-#include <linux/mtd/rawnand.h>
-
-#define FSL_UPM_WAIT_RUN_PATTERN 0x1
-#define FSL_UPM_WAIT_WRITE_BYTE 0x2
-#define FSL_UPM_WAIT_WRITE_BUFFER 0x4
-
-struct fsl_upm {
- void __iomem *mdr;
- void __iomem *mxmr;
- void __iomem *mar;
- void __iomem *io_addr;
-};
-
-struct fsl_upm_nand {
- struct fsl_upm upm;
-
- int width;
- int upm_cmd_offset;
- int upm_addr_offset;
- int upm_mar_chip_offset;
- int wait_flags;
- int (*dev_ready)(int chip_nr);
- int chip_delay;
- int chip_offset;
- int chip_nr;
-
- /* no need to fill */
- int last_ctrl;
-};
-
-extern int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun);
-
-#endif
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 46/87] mtd: Drop unused fsmc_nand driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (44 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 45/87] mtd: Drop unused fsl_upm driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 47/87] mtd: Drop unused kb9202_nand driver Simon Glass
` (41 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Michael Trimarchi
This is not used since this commit:
570c3dcfc15 arm: Remove spear600 boards and the rest of SPEAr support
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
---
(no changes since v1)
drivers/mtd/nand/raw/Makefile | 1 -
drivers/mtd/nand/raw/fsmc_nand.c | 470 -------------------------------
include/linux/mtd/fsmc_nand.h | 84 ------
3 files changed, 555 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/fsmc_nand.c
delete mode 100644 include/linux/mtd/fsmc_nand.h
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index e8764cf358b..f004eb39f3b 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_NAND_DENALI) += denali.o
obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
-obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
deleted file mode 100644
index d795864949c..00000000000
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ /dev/null
@@ -1,470 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com.
- *
- * (C) Copyright 2012
- * Amit Virdi, STMicroelectronics, amit.virdi@st.com.
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/fsmc_nand.h>
-#include <asm/arch/hardware.h>
-
-static u32 fsmc_version;
-static struct fsmc_regs *const fsmc_regs_p = (struct fsmc_regs *)
- CONFIG_SYS_FSMC_BASE;
-
-/*
- * ECC4 and ECC1 have 13 bytes and 3 bytes of ecc respectively for 512 bytes of
- * data. ECC4 can correct up to 8 bits in 512 bytes of data while ECC1 can
- * correct 1 bit in 512 bytes
- */
-
-static struct nand_ecclayout fsmc_ecc4_lp_layout = {
- .eccbytes = 104,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 1}
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_224_layout = {
- .eccbytes = 104,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 97}
- }
-};
-
-/*
- * ECC placement definitions in oobfree type format
- * There are 13 bytes of ecc for every 512 byte block and it has to be read
- * consecutively and immediately after the 512 byte data block for hardware to
- * generate the error bit offsets in 512 byte data
- * Managing the ecc bytes in the following way makes it easier for software to
- * read ecc bytes consecutive to data bytes. This way is similar to
- * oobfree structure maintained already in u-boot nand driver
- */
-static struct fsmc_eccplace fsmc_eccpl_lp = {
- .eccplace = {
- {.offset = 2, .length = 13},
- {.offset = 18, .length = 13},
- {.offset = 34, .length = 13},
- {.offset = 50, .length = 13},
- {.offset = 66, .length = 13},
- {.offset = 82, .length = 13},
- {.offset = 98, .length = 13},
- {.offset = 114, .length = 13}
- }
-};
-
-static struct nand_ecclayout fsmc_ecc4_sp_layout = {
- .eccbytes = 13,
- .eccpos = { 0, 1, 2, 3, 6, 7, 8,
- 9, 10, 11, 12, 13, 14
- },
- .oobfree = {
- {.offset = 15, .length = 1},
- }
-};
-
-static struct fsmc_eccplace fsmc_eccpl_sp = {
- .eccplace = {
- {.offset = 0, .length = 4},
- {.offset = 6, .length = 9}
- }
-};
-
-static struct nand_ecclayout fsmc_ecc1_layout = {
- .eccbytes = 24,
- .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
- 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
- .oobfree = {
- {.offset = 8, .length = 8},
- {.offset = 24, .length = 8},
- {.offset = 40, .length = 8},
- {.offset = 56, .length = 8},
- {.offset = 72, .length = 8},
- {.offset = 88, .length = 8},
- {.offset = 104, .length = 8},
- {.offset = 120, .length = 8}
- }
-};
-
-/* Count the number of 0's in buff upto a max of max_bits */
-static int count_written_bits(uint8_t *buff, int size, int max_bits)
-{
- int k, written_bits = 0;
-
- for (k = 0; k < size; k++) {
- written_bits += hweight8(~buff[k]);
- if (written_bits > max_bits)
- break;
- }
-
- return written_bits;
-}
-
-static void fsmc_nand_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
-{
- struct nand_chip *this = mtd_to_nand(mtd);
- ulong IO_ADDR_W;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- IO_ADDR_W = (ulong)this->IO_ADDR_W;
-
- IO_ADDR_W &= ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE);
- if (ctrl & NAND_CLE)
- IO_ADDR_W |= CONFIG_SYS_NAND_CLE;
- if (ctrl & NAND_ALE)
- IO_ADDR_W |= CONFIG_SYS_NAND_ALE;
-
- if (ctrl & NAND_NCE) {
- writel(readl(&fsmc_regs_p->pc) |
- FSMC_ENABLE, &fsmc_regs_p->pc);
- } else {
- writel(readl(&fsmc_regs_p->pc) &
- ~FSMC_ENABLE, &fsmc_regs_p->pc);
- }
- this->IO_ADDR_W = (void *)IO_ADDR_W;
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-}
-
-static int fsmc_bch8_correct_data(struct mtd_info *mtd, u_char *dat,
- u_char *read_ecc, u_char *calc_ecc)
-{
- /* The calculated ecc is actually the correction index in data */
- u32 err_idx[8];
- u32 num_err, i;
- u32 ecc1, ecc2, ecc3, ecc4;
-
- num_err = (readl(&fsmc_regs_p->sts) >> 10) & 0xF;
-
- if (likely(num_err == 0))
- return 0;
-
- if (unlikely(num_err > 8)) {
- /*
- * This is a temporary erase check. A newly erased page read
- * would result in an ecc error because the oob data is also
- * erased to FF and the calculated ecc for an FF data is not
- * FF..FF.
- * This is a workaround to skip performing correction in case
- * data is FF..FF
- *
- * Logic:
- * For every page, each bit written as 0 is counted until these
- * number of bits are greater than 8 (the maximum correction
- * capability of FSMC for each 512 + 13 bytes)
- */
-
- int bits_ecc = count_written_bits(read_ecc, 13, 8);
- int bits_data = count_written_bits(dat, 512, 8);
-
- if ((bits_ecc + bits_data) <= 8) {
- if (bits_data)
- memset(dat, 0xff, 512);
- return bits_data + bits_ecc;
- }
-
- return -EBADMSG;
- }
-
- ecc1 = readl(&fsmc_regs_p->ecc1);
- ecc2 = readl(&fsmc_regs_p->ecc2);
- ecc3 = readl(&fsmc_regs_p->ecc3);
- ecc4 = readl(&fsmc_regs_p->sts);
-
- err_idx[0] = (ecc1 >> 0) & 0x1FFF;
- err_idx[1] = (ecc1 >> 13) & 0x1FFF;
- err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F);
- err_idx[3] = (ecc2 >> 7) & 0x1FFF;
- err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF);
- err_idx[5] = (ecc3 >> 1) & 0x1FFF;
- err_idx[6] = (ecc3 >> 14) & 0x1FFF;
- err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F);
-
- i = 0;
- while (i < num_err) {
- err_idx[i] ^= 3;
-
- if (err_idx[i] < 512 * 8)
- __change_bit(err_idx[i], dat);
-
- i++;
- }
-
- return num_err;
-}
-
-static int fsmc_read_hwecc(struct mtd_info *mtd,
- const u_char *data, u_char *ecc)
-{
- u_int ecc_tmp;
- int timeout = CONFIG_SYS_HZ;
- ulong start;
-
- switch (fsmc_version) {
- case FSMC_VER8:
- start = get_timer(0);
- while (get_timer(start) < timeout) {
- /*
- * Busy waiting for ecc computation
- * to finish for 512 bytes
- */
- if (readl(&fsmc_regs_p->sts) & FSMC_CODE_RDY)
- break;
- }
-
- ecc_tmp = readl(&fsmc_regs_p->ecc1);
- ecc[0] = (u_char) (ecc_tmp >> 0);
- ecc[1] = (u_char) (ecc_tmp >> 8);
- ecc[2] = (u_char) (ecc_tmp >> 16);
- ecc[3] = (u_char) (ecc_tmp >> 24);
-
- ecc_tmp = readl(&fsmc_regs_p->ecc2);
- ecc[4] = (u_char) (ecc_tmp >> 0);
- ecc[5] = (u_char) (ecc_tmp >> 8);
- ecc[6] = (u_char) (ecc_tmp >> 16);
- ecc[7] = (u_char) (ecc_tmp >> 24);
-
- ecc_tmp = readl(&fsmc_regs_p->ecc3);
- ecc[8] = (u_char) (ecc_tmp >> 0);
- ecc[9] = (u_char) (ecc_tmp >> 8);
- ecc[10] = (u_char) (ecc_tmp >> 16);
- ecc[11] = (u_char) (ecc_tmp >> 24);
-
- ecc_tmp = readl(&fsmc_regs_p->sts);
- ecc[12] = (u_char) (ecc_tmp >> 16);
- break;
-
- default:
- ecc_tmp = readl(&fsmc_regs_p->ecc1);
- ecc[0] = (u_char) (ecc_tmp >> 0);
- ecc[1] = (u_char) (ecc_tmp >> 8);
- ecc[2] = (u_char) (ecc_tmp >> 16);
- break;
- }
-
- return 0;
-}
-
-void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
-{
- writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCPLEN_256,
- &fsmc_regs_p->pc);
- writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCEN,
- &fsmc_regs_p->pc);
- writel(readl(&fsmc_regs_p->pc) | FSMC_ECCEN,
- &fsmc_regs_p->pc);
-}
-
-/*
- * fsmc_read_page_hwecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @oob_required: caller expects OOB data read to chip->oob_poi
- * @page: page number to read
- *
- * This routine is needed for fsmc verison 8 as reading from NAND chip has to be
- * performed in a strict sequence as follows:
- * data(512 byte) -> ecc(13 byte)
- * After this read, fsmc hardware generates and reports error data bits(upto a
- * max of 8 bits)
- */
-static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page)
-{
- struct fsmc_eccplace *fsmc_eccpl;
- int i, j, s, stat, eccsize = chip->ecc.size;
- int eccbytes = chip->ecc.bytes;
- int eccsteps = chip->ecc.steps;
- uint8_t *p = buf;
- uint8_t *ecc_calc = chip->buffers->ecccalc;
- uint8_t *ecc_code = chip->buffers->ecccode;
- int off, len, group = 0;
- uint8_t oob[13] __attribute__ ((aligned (2)));
-
- /* Differentiate between small and large page ecc place definitions */
- if (mtd->writesize == 512)
- fsmc_eccpl = &fsmc_eccpl_sp;
- else
- fsmc_eccpl = &fsmc_eccpl_lp;
-
- for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
-
- chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
- chip->ecc.hwctl(mtd, NAND_ECC_READ);
- chip->read_buf(mtd, p, eccsize);
-
- for (j = 0; j < eccbytes;) {
- off = fsmc_eccpl->eccplace[group].offset;
- len = fsmc_eccpl->eccplace[group].length;
- group++;
-
- /*
- * length is intentionally kept a higher multiple of 2
- * to read at least 13 bytes even in case of 16 bit NAND
- * devices
- */
- if (chip->options & NAND_BUSWIDTH_16)
- len = roundup(len, 2);
- chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
- chip->read_buf(mtd, oob + j, len);
- j += len;
- }
-
- memcpy(&ecc_code[i], oob, 13);
- chip->ecc.calculate(mtd, p, &ecc_calc[i]);
-
- stat = chip->ecc.correct(mtd, p, &ecc_code[i],
- &ecc_calc[i]);
- if (stat < 0)
- mtd->ecc_stats.failed++;
- else
- mtd->ecc_stats.corrected += stat;
- }
-
- return 0;
-}
-
-int fsmc_nand_init(struct nand_chip *nand)
-{
- static int chip_nr;
- struct mtd_info *mtd;
- u32 peripid2 = readl(&fsmc_regs_p->peripid2);
-
- fsmc_version = (peripid2 >> FSMC_REVISION_SHFT) &
- FSMC_REVISION_MSK;
-
- writel(readl(&fsmc_regs_p->ctrl) | FSMC_WP, &fsmc_regs_p->ctrl);
-
-#if defined(CONFIG_SYS_FSMC_NAND_16BIT)
- writel(FSMC_DEVWID_16 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON,
- &fsmc_regs_p->pc);
-#elif defined(CONFIG_SYS_FSMC_NAND_8BIT)
- writel(FSMC_DEVWID_8 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON,
- &fsmc_regs_p->pc);
-#else
-#error Please define CONFIG_SYS_FSMC_NAND_16BIT or CONFIG_SYS_FSMC_NAND_8BIT
-#endif
- writel(readl(&fsmc_regs_p->pc) | FSMC_TCLR_1 | FSMC_TAR_1,
- &fsmc_regs_p->pc);
- writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
- &fsmc_regs_p->comm);
- writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
- &fsmc_regs_p->attrib);
-
- nand->options = 0;
-#if defined(CONFIG_SYS_FSMC_NAND_16BIT)
- nand->options |= NAND_BUSWIDTH_16;
-#endif
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.size = 512;
- nand->ecc.calculate = fsmc_read_hwecc;
- nand->ecc.hwctl = fsmc_enable_hwecc;
- nand->cmd_ctrl = fsmc_nand_hwcontrol;
- nand->IO_ADDR_R = nand->IO_ADDR_W =
- (void __iomem *)CFG_SYS_NAND_BASE;
- nand->badblockbits = 7;
-
- mtd = nand_to_mtd(nand);
-
- switch (fsmc_version) {
- case FSMC_VER8:
- nand->ecc.bytes = 13;
- nand->ecc.strength = 8;
- nand->ecc.correct = fsmc_bch8_correct_data;
- nand->ecc.read_page = fsmc_read_page_hwecc;
- if (mtd->writesize == 512)
- nand->ecc.layout = &fsmc_ecc4_sp_layout;
- else {
- if (mtd->oobsize == 224)
- nand->ecc.layout = &fsmc_ecc4_224_layout;
- else
- nand->ecc.layout = &fsmc_ecc4_lp_layout;
- }
-
- break;
- default:
- nand->ecc.bytes = 3;
- nand->ecc.strength = 1;
- nand->ecc.layout = &fsmc_ecc1_layout;
- nand->ecc.correct = nand_correct_data;
- break;
- }
-
- /* Detect NAND chips */
- if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL))
- return -ENXIO;
-
- if (nand_scan_tail(mtd))
- return -ENXIO;
-
- if (nand_register(chip_nr++, mtd))
- return -ENXIO;
-
- return 0;
-}
diff --git a/include/linux/mtd/fsmc_nand.h b/include/linux/mtd/fsmc_nand.h
deleted file mode 100644
index 1d8a067f17e..00000000000
--- a/include/linux/mtd/fsmc_nand.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com.
- */
-
-#ifndef __FSMC_NAND_H__
-#define __FSMC_NAND_H__
-
-#include <linux/mtd/rawnand.h>
-
-struct fsmc_regs {
- u32 ctrl; /* 0x00 */
- u8 reserved_1[0x40 - 0x04];
- u32 pc; /* 0x40 */
- u32 sts; /* 0x44 */
- u32 comm; /* 0x48 */
- u32 attrib; /* 0x4c */
- u32 ioata; /* 0x50 */
- u32 ecc1; /* 0x54 */
- u32 ecc2; /* 0x58 */
- u32 ecc3; /* 0x5c */
- u8 reserved_2[0xfe0 - 0x60];
- u32 peripid0; /* 0xfe0 */
- u32 peripid1; /* 0xfe4 */
- u32 peripid2; /* 0xfe8 */
- u32 peripid3; /* 0xfec */
- u32 pcellid0; /* 0xff0 */
- u32 pcellid1; /* 0xff4 */
- u32 pcellid2; /* 0xff8 */
- u32 pcellid3; /* 0xffc */
-};
-
-/* ctrl register definitions */
-#define FSMC_WP (1 << 7)
-
-/* pc register definitions */
-#define FSMC_RESET (1 << 0)
-#define FSMC_WAITON (1 << 1)
-#define FSMC_ENABLE (1 << 2)
-#define FSMC_DEVTYPE_NAND (1 << 3)
-#define FSMC_DEVWID_8 (0 << 4)
-#define FSMC_DEVWID_16 (1 << 4)
-#define FSMC_ECCEN (1 << 6)
-#define FSMC_ECCPLEN_512 (0 << 7)
-#define FSMC_ECCPLEN_256 (1 << 7)
-#define FSMC_TCLR_1 (1 << 9)
-#define FSMC_TAR_1 (1 << 13)
-
-/* sts register definitions */
-#define FSMC_CODE_RDY (1 << 15)
-
-/* comm register definitions */
-#define FSMC_TSET_0 (0 << 0)
-#define FSMC_TWAIT_6 (6 << 8)
-#define FSMC_THOLD_4 (4 << 16)
-#define FSMC_THIZ_1 (1 << 24)
-
-/* peripid2 register definitions */
-#define FSMC_REVISION_MSK (0xf)
-#define FSMC_REVISION_SHFT (0x4)
-
-#define FSMC_VER8 0x8
-
-/*
- * There are 13 bytes of ecc for every 512 byte block and it has to be read
- * consecutively and immediately after the 512 byte data block for hardware to
- * generate the error bit offsets
- * Managing the ecc bytes in the following way is easier. This way is similar to
- * oobfree structure maintained already in u-boot nand driver
- */
-#define FSMC_MAX_ECCPLACE_ENTRIES 32
-
-struct fsmc_nand_eccplace {
- u32 offset;
- u32 length;
-};
-
-struct fsmc_eccplace {
- struct fsmc_nand_eccplace eccplace[FSMC_MAX_ECCPLACE_ENTRIES];
-};
-
-extern int fsmc_nand_init(struct nand_chip *nand);
-#endif
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 47/87] mtd: Drop unused kb9202_nand driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (45 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 46/87] mtd: Drop unused fsmc_nand driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 48/87] mtd: Drop unused nand_plat driver Simon Glass
` (40 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used since time out of mind.
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/mtd/nand/raw/Makefile | 1 -
drivers/mtd/nand/raw/kb9202_nand.c | 134 -----------------------------
2 files changed, 135 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/kb9202_nand.c
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index f004eb39f3b..c25acb11804 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_NAND_DENALI) += denali.o
obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
-obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o
diff --git a/drivers/mtd/nand/raw/kb9202_nand.c b/drivers/mtd/nand/raw/kb9202_nand.c
deleted file mode 100644
index 9d26532c780..00000000000
--- a/drivers/mtd/nand/raw/kb9202_nand.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2006
- * KwikByte <kb9200_dev@kwikbyte.com>
- *
- * (C) Copyright 2009
- * Matthias Kaehlcke <matthias@kaehlcke.net>
- */
-
-#include <common.h>
-#include <linux/mtd/rawnand.h>
-#include <asm/io.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/arch/hardware.h>
-
-#include <nand.h>
-
-/*
- * hardware specific access to control-lines
- */
-
-#define MASK_ALE (1 << 22) /* our ALE is A22 */
-#define MASK_CLE (1 << 21) /* our CLE is A21 */
-
-#define KB9202_NAND_NCE (1 << 28) /* EN* on D28 */
-#define KB9202_NAND_BUSY (1 << 29) /* RB* on D29 */
-
-#define KB9202_SMC2_NWS (1 << 2)
-#define KB9202_SMC2_TDF (1 << 8)
-#define KB9202_SMC2_RWSETUP (1 << 24)
-#define KB9202_SMC2_RWHOLD (1 << 29)
-
-/*
- * Board-specific function to access device control signals
- */
-static void kb9202_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd_to_nand(mtd);
-
- if (ctrl & NAND_CTRL_CHANGE) {
- ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-
- /* clear ALE and CLE bits */
- IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
-
- if (ctrl & NAND_CLE)
- IO_ADDR_W |= MASK_CLE;
-
- if (ctrl & NAND_ALE)
- IO_ADDR_W |= MASK_ALE;
-
- this->IO_ADDR_W = (void *) IO_ADDR_W;
-
- if (ctrl & NAND_NCE)
- writel(KB9202_NAND_NCE, AT91C_PIOC_CODR);
- else
- writel(KB9202_NAND_NCE, AT91C_PIOC_SODR);
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-}
-
-
-/*
- * Board-specific function to access the device ready signal.
- */
-static int kb9202_nand_ready(struct mtd_info *mtd)
-{
- return readl(AT91C_PIOC_PDSR) & KB9202_NAND_BUSY;
-}
-
-
-/*
- * Board-specific NAND init. Copied from include/linux/mtd/nand.h for reference.
- *
- * struct nand_chip - NAND Private Flash Chip Data
- * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
- * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
- * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
- * If set to NULL no access to ready/busy is available and the ready/busy information
- * is read from the chip status register
- * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
- * be provided if a hardware ECC is available
- * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines
- * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
- * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
- * special functionality. See the defines for further explanation
-*/
-/*
- * This routine initializes controller and GPIOs.
- */
-int board_nand_init(struct nand_chip *nand)
-{
- unsigned int value;
-
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->cmd_ctrl = kb9202_nand_hwcontrol;
- nand->dev_ready = kb9202_nand_ready;
-
- /* in case running outside of bootloader */
- writel(1 << AT91C_ID_PIOC, AT91C_PMC_PCER);
-
- /* setup nand flash access (allow ample margin) */
- /* 4 wait states, 1 setup, 1 hold, 1 float for 8-bit device */
- writel(AT91C_SMC2_WSEN | KB9202_SMC2_NWS | KB9202_SMC2_TDF |
- AT91C_SMC2_DBW_8 | KB9202_SMC2_RWSETUP | KB9202_SMC2_RWHOLD,
- AT91C_SMC_CSR3);
-
- /* enable internal NAND controller */
- value = readl(AT91C_EBI_CSA);
- value |= AT91C_EBI_CS3A_SMC_SmartMedia;
- writel(value, AT91C_EBI_CSA);
-
- /* enable SMOE/SMWE */
- writel(AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE, AT91C_PIOC_ASR);
- writel(AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE, AT91C_PIOC_PDR);
- writel(AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE, AT91C_PIOC_OER);
-
- /* set NCE to high */
- writel(KB9202_NAND_NCE, AT91C_PIOC_SODR);
-
- /* disable output on pin connected to the busy line of the NAND */
- writel(KB9202_NAND_BUSY, AT91C_PIOC_ODR);
-
- /* enable the PIO to control NCE and BUSY */
- writel(KB9202_NAND_NCE | KB9202_NAND_BUSY, AT91C_PIOC_PER);
-
- /* enable output for NCE */
- writel(KB9202_NAND_NCE, AT91C_PIOC_OER);
-
- return (0);
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 48/87] mtd: Drop unused nand_plat driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (46 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 47/87] mtd: Drop unused kb9202_nand driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 49/87] Makefile: Drop CONFIG_OF_EARLY_FLATTREE Simon Glass
` (39 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used since this commit:
936478e797a SPARC: Remove
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/mtd/nand/raw/Makefile | 1 -
drivers/mtd/nand/raw/nand_plat.c | 65 --------------------------------
2 files changed, 66 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/nand_plat.c
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index c25acb11804..add2b4cf655 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -70,7 +70,6 @@ obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
-obj-$(CONFIG_NAND_PLAT) += nand_plat.o
obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o
obj-$(CONFIG_NAND_MXIC) += mxic_nand.o
obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o
diff --git a/drivers/mtd/nand/raw/nand_plat.c b/drivers/mtd/nand/raw/nand_plat.c
deleted file mode 100644
index 81e7aa218d5..00000000000
--- a/drivers/mtd/nand/raw/nand_plat.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Genericish driver for memory mapped NAND devices
- *
- * Copyright (c) 2006-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-/* Your board must implement the following macros:
- * NAND_PLAT_WRITE_CMD(chip, cmd)
- * NAND_PLAT_WRITE_ADR(chip, cmd)
- * NAND_PLAT_INIT()
- *
- * It may also implement the following:
- * NAND_PLAT_DEV_READY(chip)
- */
-
-#include <common.h>
-#include <linux/mtd/rawnand.h>
-#include <asm/io.h>
-#ifdef NAND_PLAT_GPIO_DEV_READY
-# include <asm/gpio.h>
-# define NAND_PLAT_DEV_READY(chip) gpio_get_value(NAND_PLAT_GPIO_DEV_READY)
-#endif
-
-#include <nand.h>
-
-static void plat_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd_to_nand(mtd);
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- NAND_PLAT_WRITE_CMD(this, cmd);
- else
- NAND_PLAT_WRITE_ADR(this, cmd);
-}
-
-#ifdef NAND_PLAT_DEV_READY
-static int plat_dev_ready(struct mtd_info *mtd)
-{
- return NAND_PLAT_DEV_READY((struct nand_chip *)mtd_to_nand(mtd));
-}
-#else
-# define plat_dev_ready NULL
-#endif
-
-int board_nand_init(struct nand_chip *nand)
-{
-#ifdef NAND_PLAT_GPIO_DEV_READY
- gpio_request(NAND_PLAT_GPIO_DEV_READY, "nand-plat");
- gpio_direction_input(NAND_PLAT_GPIO_DEV_READY);
-#endif
-
-#ifdef NAND_PLAT_INIT
- NAND_PLAT_INIT();
-#endif
-
- nand->cmd_ctrl = plat_cmd_ctrl;
- nand->dev_ready = plat_dev_ready;
- nand->ecc.mode = NAND_ECC_SOFT;
-
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 49/87] Makefile: Drop CONFIG_OF_EARLY_FLATTREE
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (47 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 48/87] mtd: Drop unused nand_plat driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 50/87] omap: Drop unused CONFIG_OMAP_USB_PHY Simon Glass
` (38 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Masahiro Yamada
This option does not exist, so drop the dead code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 4 ----
1 file changed, 4 deletions(-)
diff --git a/Makefile b/Makefile
index 400261606e3..d7a0121828c 100644
--- a/Makefile
+++ b/Makefile
@@ -2004,10 +2004,6 @@ dtbs: prepare3 scripts_dtc
dtbs_install:
$(Q)$(MAKE) $(dtbinst)=$(dtstree)
-ifdef CONFIG_OF_EARLY_FLATTREE
-all: dtbs
-endif
-
endif
# Check dtc and pylibfdt, if DTC is provided, else build them
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 50/87] omap: Drop unused CONFIG_OMAP_USB_PHY
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (48 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 49/87] Makefile: Drop CONFIG_OF_EARLY_FLATTREE Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 51/87] mtd: Drop unused CONFIG_ONENAND_U_BOOT Simon Glass
` (37 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This option does not exist, so the Makefile rule does nothing. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
(no changes since v1)
drivers/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/Makefile b/drivers/Makefile
index 83b14ef1fd3..15d19d0c8a3 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -59,7 +59,6 @@ obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
obj-$(CONFIG_SPL_WATCHDOG) += watchdog/
obj-$(CONFIG_SPL_USB_HOST) += usb/host/
-obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
obj-$(CONFIG_SPL_SATA) += ata/ scsi/
obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/
obj-$(CONFIG_SPL_THERMAL) += thermal/
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 51/87] mtd: Drop unused CONFIG_ONENAND_U_BOOT
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (49 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 50/87] omap: Drop unused CONFIG_OMAP_USB_PHY Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 52/87] ppc: Drop unused CONFIG_P2020DS Simon Glass
` (36 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This option does not exist, so the Makefile rule does nothing. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/Makefile b/Makefile
index d7a0121828c..21d62f66367 100644
--- a/Makefile
+++ b/Makefile
@@ -956,7 +956,6 @@ endif
# Always append INPUTS so that arch config.mk's can add custom ones
INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
-INPUTS-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
ifeq ($(CONFIG_SPL_FSL_PBL),y)
INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
else
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 52/87] ppc: Drop unused CONFIG_P2020DS
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (50 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 51/87] mtd: Drop unused CONFIG_ONENAND_U_BOOT Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 53/87] gpio: Drop unused pca9698 driver Simon Glass
` (35 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Tom Rini, Simon Glass, Andy Fleming, Mario Six, Priyanka Jain,
Stefan Roese, Wolfgang Denk
This option does not exist, so the Makefile rule does nothing. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/freescale/common/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index fc51d6d3e18..9d5f38bb225 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_TARGET_MPC8548CDS) += cds_pci_ft.o
obj-$(CONFIG_TARGET_MPC8536DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P1022DS) += ics307_clk.o
-obj-$(CONFIG_P2020DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P3041DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P4080DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P5040DS) += ics307_clk.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 53/87] gpio: Drop unused pca9698 driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (51 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 52/87] ppc: Drop unused CONFIG_P2020DS Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 54/87] samsung: Rename PINCTRL_EXYNOS78x0 Simon Glass
` (34 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/mips/mach-octeon/octeon_fdt.c | 43 +---------
board/gdsys/a38x/hre.c | 1 -
drivers/gpio/Makefile | 1 -
drivers/gpio/pca9698.c | 127 -----------------------------
include/pca9698.h | 17 ----
5 files changed, 1 insertion(+), 188 deletions(-)
delete mode 100644 drivers/gpio/pca9698.c
delete mode 100644 include/pca9698.h
diff --git a/arch/mips/mach-octeon/octeon_fdt.c b/arch/mips/mach-octeon/octeon_fdt.c
index 0ccfe149dcc..c74fe9d9fb8 100644
--- a/arch/mips/mach-octeon/octeon_fdt.c
+++ b/arch/mips/mach-octeon/octeon_fdt.c
@@ -30,9 +30,6 @@
#ifdef CONFIG_PCF857X
#include <pcf857x.h>
#endif
-#ifdef CONFIG_PCA9698
-#include <pca9698.h>
-#endif
#ifdef CONFIG_PCA9554
#include <pca9554.h>
#endif
@@ -59,13 +56,6 @@ static const char * const pca9555_gpio_list[] = {
};
#endif
-#ifdef CONFIG_PCA9698
-/** List of compatible strings supported by pca9698 driver */
-static const char * const pca9698_gpio_list[] = {
- "nxp,pca9505", "pca9505", "nxp,pca9698", "pca9698", NULL,
-};
-#endif
-
#ifdef CONFIG_PCA953X
/** List of compatible strings supported by pca953x driver */
static const char * const pca953x_gpio_list[] = {
@@ -807,19 +797,6 @@ int octeon_fdt_read_gpio(const void *fdt, int phandle, int pin)
}
value = (value >> pin) & 1;
break;
-#endif
-#ifdef CONFIG_PCA9698
- case CVMX_GPIO_PIN_PCA9698:
- node = fdt_node_offset_by_phandle(fdt, phandle);
- if (octeon_fdt_get_i2c_bus_addr(fdt, node, &bus, &addr)) {
- printf("%s: Could not get gpio bus and/or address\n", __func__);
- return -1;
- }
- old_bus = i2c_get_bus_num();
- i2c_set_bus_num(bus);
- value = pca9698_get_value(addr, pin);
- i2c_set_bus_num(old_bus);
- break;
#endif
case CVMX_GPIO_PIN_OCTEON:
value = gpio_get_value(pin);
@@ -880,18 +857,6 @@ int octeon_fdt_set_gpio(const void *fdt, int phandle, int pin, int val)
return -1;
}
return pcf957x_set_val(bus, addr, 1 << pin, val << pin);
-#endif
-#ifdef CONFIG_PCA9698
- case CVMX_GPIO_PIN_PCA9698:
- if (octeon_fdt_get_i2c_bus_addr(fdt, node, &bus, &addr)) {
- printf("%s: Could not get gpio bus and/or address\n", __func__);
- return -1;
- }
- old_bus = i2c_get_bus_num();
- i2c_set_bus_num(bus);
- rc = pca9698_set_value(addr, pin, val);
- i2c_set_bus_num(old_bus);
- return rc;
#endif
case CVMX_GPIO_PIN_OCTEON:
return gpio_set_value(pin, val);
@@ -951,13 +916,7 @@ int octeon_fdt_get_gpio_info(int fdt_node, enum octeon_gpio_type *type,
*type = GPIO_TYPE_PCA953X;
}
#endif
-#ifdef CONFIG_PCA9698
- if (!octeon_fdt_node_check_compatible(fdt, fdt_node, pca9698_gpio_list)) {
- debug("%s: Found PCA9698 compatible GPIO", __func__);
- *type = GPIO_TYPE_PCA9698;
- }
-#endif
-#if defined(CONFIG_PCA953X) || defined(CONFIG_PCA9698) || \
+#if defined(CONFIG_PCA953X) || \
defined(CONFIG_PCA9555) || defined(CONFIG_PCA9554)
if (!i2c_addr || !i2c_bus) {
printf("%s: Error: i2c_addr or i2c_bus is NULL\n", __func__);
diff --git a/board/gdsys/a38x/hre.c b/board/gdsys/a38x/hre.c
index 2f16a4d3e11..d16233ed78e 100644
--- a/board/gdsys/a38x/hre.c
+++ b/board/gdsys/a38x/hre.c
@@ -15,7 +15,6 @@
#include <u-boot/sha1.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
-#include <pca9698.h>
#include "hre.h"
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 889a88dc885..fcd136367ac 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -28,7 +28,6 @@ obj-$(CONFIG_MXC_GPIO) += mxc_gpio.o
obj-$(CONFIG_MXS_GPIO) += mxs_gpio.o
obj-$(CONFIG_NPCM_GPIO) += npcm_gpio.o
obj-$(CONFIG_PCA953X) += pca953x.o
-obj-$(CONFIG_PCA9698) += pca9698.o
obj-$(CONFIG_ROCKCHIP_GPIO) += rk_gpio.o
obj-$(CONFIG_RCAR_GPIO) += gpio-rcar.o
obj-$(CONFIG_RZA1_GPIO) += gpio-rza1.o
diff --git a/drivers/gpio/pca9698.c b/drivers/gpio/pca9698.c
deleted file mode 100644
index 11274c78101..00000000000
--- a/drivers/gpio/pca9698.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2011
- * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-/*
- * Driver for NXP's pca9698 40 bit I2C gpio expander
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <malloc.h>
-#include <linux/errno.h>
-#include <pca9698.h>
-
-/*
- * The pca9698 registers
- */
-
-#define PCA9698_REG_INPUT 0x00
-#define PCA9698_REG_OUTPUT 0x08
-#define PCA9698_REG_POLARITY 0x10
-#define PCA9698_REG_CONFIG 0x18
-
-#define PCA9698_BUFFER_SIZE 5
-#define PCA9698_GPIO_COUNT 40
-
-static int pca9698_read40(u8 addr, u8 offset, u8 *buffer)
-{
- u8 command = offset | 0x80; /* autoincrement */
-
- return i2c_read(addr, command, 1, buffer, PCA9698_BUFFER_SIZE);
-}
-
-static int pca9698_write40(u8 addr, u8 offset, u8 *buffer)
-{
- u8 command = offset | 0x80; /* autoincrement */
-
- return i2c_write(addr, command, 1, buffer, PCA9698_BUFFER_SIZE);
-}
-
-static void pca9698_set_bit(unsigned gpio, u8 *buffer, unsigned value)
-{
- unsigned byte = gpio / 8;
- unsigned bit = gpio % 8;
-
- if (value)
- buffer[byte] |= (1 << bit);
- else
- buffer[byte] &= ~(1 << bit);
-}
-
-int pca9698_request(unsigned gpio, const char *label)
-{
- if (gpio >= PCA9698_GPIO_COUNT)
- return -EINVAL;
-
- return 0;
-}
-
-void pca9698_free(unsigned gpio)
-{
-}
-
-int pca9698_direction_input(u8 addr, unsigned gpio)
-{
- u8 data[PCA9698_BUFFER_SIZE];
- int res;
-
- res = pca9698_read40(addr, PCA9698_REG_CONFIG, data);
- if (res)
- return res;
-
- pca9698_set_bit(gpio, data, 1);
-
- return pca9698_write40(addr, PCA9698_REG_CONFIG, data);
-}
-
-int pca9698_direction_output(u8 addr, unsigned gpio, int value)
-{
- u8 data[PCA9698_BUFFER_SIZE];
- int res;
-
- res = pca9698_set_value(addr, gpio, value);
- if (res)
- return res;
-
- res = pca9698_read40(addr, PCA9698_REG_CONFIG, data);
- if (res)
- return res;
-
- pca9698_set_bit(gpio, data, 0);
-
- return pca9698_write40(addr, PCA9698_REG_CONFIG, data);
-}
-
-int pca9698_get_value(u8 addr, unsigned gpio)
-{
- unsigned config_byte = gpio / 8;
- unsigned config_bit = gpio % 8;
- unsigned value;
- u8 data[PCA9698_BUFFER_SIZE];
- int res;
-
- res = pca9698_read40(addr, PCA9698_REG_INPUT, data);
- if (res)
- return -1;
-
- value = data[config_byte] & (1 << config_bit);
-
- return !!value;
-}
-
-int pca9698_set_value(u8 addr, unsigned gpio, int value)
-{
- u8 data[PCA9698_BUFFER_SIZE];
- int res;
-
- res = pca9698_read40(addr, PCA9698_REG_OUTPUT, data);
- if (res)
- return res;
-
- pca9698_set_bit(gpio, data, value);
-
- return pca9698_write40(addr, PCA9698_REG_OUTPUT, data);
-}
diff --git a/include/pca9698.h b/include/pca9698.h
deleted file mode 100644
index 48a5f756e28..00000000000
--- a/include/pca9698.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-#ifndef __PCA9698_H_
-#define __PCA9698_H_
-
-int pca9698_request(unsigned gpio, const char *label);
-void pca9698_free(unsigned gpio);
-int pca9698_direction_input(u8 addr, unsigned gpio);
-int pca9698_direction_output(u8 addr, unsigned gpio, int value);
-int pca9698_get_value(u8 addr, unsigned gpio);
-int pca9698_set_value(u8 addr, unsigned gpio, int value);
-
-#endif /* __PCA9698_H_ */
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 54/87] samsung: Rename PINCTRL_EXYNOS78x0
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (52 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 53/87] gpio: Drop unused pca9698 driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 55/87] power: Drop unused bat_trats driver and battery code Simon Glass
` (33 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Minkyu Kang
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/mach-exynos/Kconfig | 6 +++---
drivers/pinctrl/exynos/Kconfig | 2 +-
drivers/pinctrl/exynos/Makefile | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 8f3aee052c8..1a1fd7261b1 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -204,7 +204,7 @@ config TARGET_A5Y17LTE
select CLK_EXYNOS
select OF_CONTROL
select PINCTRL
- select PINCTRL_EXYNOS78x0
+ select PINCTRL_EXYNOS78X0
select SUPPORT_SPL
config TARGET_A7Y17LTE
@@ -213,7 +213,7 @@ config TARGET_A7Y17LTE
select CLK_EXYNOS
select OF_CONTROL
select PINCTRL
- select PINCTRL_EXYNOS78x0
+ select PINCTRL_EXYNOS78X0
select SUPPORT_SPL
config TARGET_A3Y17LTE
@@ -222,7 +222,7 @@ config TARGET_A3Y17LTE
select CLK_EXYNOS
select OF_CONTROL
select PINCTRL
- select PINCTRL_EXYNOS78x0
+ select PINCTRL_EXYNOS78X0
select SUPPORT_SPL
endchoice
diff --git a/drivers/pinctrl/exynos/Kconfig b/drivers/pinctrl/exynos/Kconfig
index a60f49869b4..821bdd14072 100644
--- a/drivers/pinctrl/exynos/Kconfig
+++ b/drivers/pinctrl/exynos/Kconfig
@@ -9,7 +9,7 @@ config PINCTRL_EXYNOS7420
Support pin multiplexing and pin configuration control on
Samsung's Exynos7420 SoC.
-config PINCTRL_EXYNOS78x0
+config PINCTRL_EXYNOS78X0
bool "Samsung Exynos78x0 pinctrl driver"
depends on ARCH_EXYNOS && PINCTRL_FULL
select PINCTRL_EXYNOS
diff --git a/drivers/pinctrl/exynos/Makefile b/drivers/pinctrl/exynos/Makefile
index 07db970ca94..445c8e17aea 100644
--- a/drivers/pinctrl/exynos/Makefile
+++ b/drivers/pinctrl/exynos/Makefile
@@ -5,4 +5,4 @@
obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o
obj-$(CONFIG_PINCTRL_EXYNOS7420) += pinctrl-exynos7420.o
-obj-$(CONFIG_PINCTRL_EXYNOS78x0) += pinctrl-exynos78x0.o
+obj-$(CONFIG_PINCTRL_EXYNOS78X0) += pinctrl-exynos78x0.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 55/87] power: Drop unused bat_trats driver and battery code
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (53 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 54/87] samsung: Rename PINCTRL_EXYNOS78x0 Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 56/87] power: Drop unused fg_max17042 driver and fuel gauge code Simon Glass
` (32 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Lukasz Majewski
This driver and bat_trats2 are not used. Drop them and the entire battery
directory, since there is nothing left.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/power/Makefile | 1 -
drivers/power/battery/Makefile | 7 ---
drivers/power/battery/bat_trats.c | 91 ------------------------------
drivers/power/battery/bat_trats2.c | 65 ---------------------
4 files changed, 164 deletions(-)
delete mode 100644 drivers/power/battery/Makefile
delete mode 100644 drivers/power/battery/bat_trats.c
delete mode 100644 drivers/power/battery/bat_trats2.c
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 34a84808a9c..efdae3655ac 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -4,7 +4,6 @@
# Tom Rix <Tom.Rix at windriver.com>
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += acpi_pmc/
-obj-y += battery/
obj-$(CONFIG_$(SPL_TPL_)POWER_DOMAIN) += domain/
obj-y += fuel_gauge/
obj-y += mfd/
diff --git a/drivers/power/battery/Makefile b/drivers/power/battery/Makefile
deleted file mode 100644
index 370923a6ed9..00000000000
--- a/drivers/power/battery/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2012 Samsung Electronics
-# Lukasz Majewski <l.majewski@samsung.com>
-
-obj-$(CONFIG_POWER_BATTERY_TRATS) += bat_trats.o
-obj-$(CONFIG_POWER_BATTERY_TRATS2) += bat_trats2.o
diff --git a/drivers/power/battery/bat_trats.c b/drivers/power/battery/bat_trats.c
deleted file mode 100644
index 54b2bf91e5c..00000000000
--- a/drivers/power/battery/bat_trats.c
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Samsung Electronics
- * Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#include <common.h>
-#include <console.h>
-#include <log.h>
-#include <linux/delay.h>
-#include <power/pmic.h>
-#include <power/battery.h>
-#include <power/max8997_pmic.h>
-#include <errno.h>
-
-static struct battery battery_trats;
-
-static int power_battery_charge(struct pmic *bat)
-{
- struct power_battery *p_bat = bat->pbat;
- struct battery *battery = p_bat->bat;
- int k;
-
- if (bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_ENABLE, 450))
- return -1;
-
- for (k = 0; bat->chrg->chrg_bat_present(p_bat->chrg) &&
- bat->chrg->chrg_type(p_bat->muic) &&
- battery->state_of_chrg < 100; k++) {
- udelay(2000000);
- if (!(k % 5))
- puts(".");
- bat->fg->fg_battery_update(p_bat->fg, bat);
-
- if (k == 200) {
- debug(" %d [V]", battery->voltage_uV);
- puts("\n");
- k = 0;
- }
-
- if (ctrlc()) {
- printf("\nCharging disabled on request.\n");
- goto exit;
- }
- }
- exit:
- bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_DISABLE, 0);
-
- return 0;
-}
-
-static int power_battery_init_trats(struct pmic *bat_,
- struct pmic *fg_,
- struct pmic *chrg_,
- struct pmic *muic_)
-{
- bat_->pbat->fg = fg_;
- bat_->pbat->chrg = chrg_;
- bat_->pbat->muic = muic_;
-
- bat_->fg = fg_->fg;
- bat_->chrg = chrg_->chrg;
- bat_->chrg->chrg_type = muic_->chrg->chrg_type;
- return 0;
-}
-
-static struct power_battery power_bat_trats = {
- .bat = &battery_trats,
- .battery_init = power_battery_init_trats,
- .battery_charge = power_battery_charge,
-};
-
-int power_bat_init(unsigned char bus)
-{
- static const char name[] = "BAT_TRATS";
- struct pmic *p = pmic_alloc();
-
- if (!p) {
- printf("%s: POWER allocation error!\n", __func__);
- return -ENOMEM;
- }
-
- debug("Board BAT init\n");
-
- p->interface = PMIC_NONE;
- p->name = name;
- p->bus = bus;
-
- p->pbat = &power_bat_trats;
- return 0;
-}
diff --git a/drivers/power/battery/bat_trats2.c b/drivers/power/battery/bat_trats2.c
deleted file mode 100644
index 1172970d1e0..00000000000
--- a/drivers/power/battery/bat_trats2.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013 Samsung Electronics
- * Piotr Wilczek <p.wilczek@samsung.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <power/pmic.h>
-#include <power/battery.h>
-#include <power/max77693_pmic.h>
-#include <errno.h>
-
-static struct battery battery_trats;
-
-static int power_battery_charge(struct pmic *bat)
-{
- struct power_battery *p_bat = bat->pbat;
-
- if (bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_ENABLE, 450))
- return -EINVAL;
-
- return 0;
-}
-
-static int power_battery_init_trats2(struct pmic *bat_,
- struct pmic *fg_,
- struct pmic *chrg_,
- struct pmic *muic_)
-{
- bat_->pbat->fg = fg_;
- bat_->pbat->chrg = chrg_;
- bat_->pbat->muic = muic_;
-
- bat_->fg = fg_->fg;
- bat_->chrg = chrg_->chrg;
- bat_->chrg->chrg_type = muic_->chrg->chrg_type;
- return 0;
-}
-
-static struct power_battery power_bat_trats2 = {
- .bat = &battery_trats,
- .battery_init = power_battery_init_trats2,
- .battery_charge = power_battery_charge,
-};
-
-int power_bat_init(unsigned char bus)
-{
- static const char name[] = "BAT_TRATS2";
- struct pmic *p = pmic_alloc();
-
- if (!p) {
- printf("%s: POWER allocation error!\n", __func__);
- return -ENOMEM;
- }
-
- debug("Board BAT init\n");
-
- p->interface = PMIC_NONE;
- p->name = name;
- p->bus = bus;
-
- p->pbat = &power_bat_trats2;
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 56/87] power: Drop unused fg_max17042 driver and fuel gauge code
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (54 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 55/87] power: Drop unused bat_trats driver and battery code Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 57/87] power: Drop unused muic_max77693 driver and mfd code Simon Glass
` (31 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Lukasz Majewski
This driver is not used. Drop it and the entire fuel_gauge directory,
since there is nothing left.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/power/Makefile | 1 -
drivers/power/fuel_gauge/Makefile | 6 -
drivers/power/fuel_gauge/fg_max17042.c | 287 -------------------------
include/power/fg_battery_cell_params.h | 73 -------
4 files changed, 367 deletions(-)
delete mode 100644 drivers/power/fuel_gauge/Makefile
delete mode 100644 drivers/power/fuel_gauge/fg_max17042.c
delete mode 100644 include/power/fg_battery_cell_params.h
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index efdae3655ac..93003e97e01 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -5,7 +5,6 @@
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += acpi_pmc/
obj-$(CONFIG_$(SPL_TPL_)POWER_DOMAIN) += domain/
-obj-y += fuel_gauge/
obj-y += mfd/
obj-y += pmic/
obj-y += regulator/
diff --git a/drivers/power/fuel_gauge/Makefile b/drivers/power/fuel_gauge/Makefile
deleted file mode 100644
index ca2df947585..00000000000
--- a/drivers/power/fuel_gauge/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2012 Samsung Electronics
-# Lukasz Majewski <l.majewski@samsung.com>
-
-obj-$(CONFIG_POWER_FG_MAX17042) += fg_max17042.o
diff --git a/drivers/power/fuel_gauge/fg_max17042.c b/drivers/power/fuel_gauge/fg_max17042.c
deleted file mode 100644
index a395d587a86..00000000000
--- a/drivers/power/fuel_gauge/fg_max17042.c
+++ /dev/null
@@ -1,287 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Samsung Electronics
- * Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <linux/delay.h>
-#include <power/pmic.h>
-#include <power/max17042_fg.h>
-#include <i2c.h>
-#include <power/max8997_pmic.h>
-#include <power/power_chrg.h>
-#include <power/battery.h>
-#include <power/fg_battery_cell_params.h>
-#include <errno.h>
-
-static int fg_write_regs(struct pmic *p, u8 addr, u16 *data, int num)
-{
- int ret = 0;
- int i;
-
- for (i = 0; i < num; i++, addr++) {
- ret = pmic_reg_write(p, addr, *(data + i));
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-static int fg_read_regs(struct pmic *p, u8 addr, u16 *data, int num)
-{
- unsigned int dat;
- int ret = 0;
- int i;
-
- for (i = 0; i < num; i++, addr++) {
- ret = pmic_reg_read(p, addr, &dat);
- if (ret)
- return ret;
-
- *(data + i) = (u16)dat;
- }
-
- return 0;
-}
-
-static int fg_write_and_verify(struct pmic *p, u8 addr, u16 data)
-{
- unsigned int val = data;
- int ret = 0;
-
- ret |= pmic_reg_write(p, addr, val);
- ret |= pmic_reg_read(p, addr, &val);
-
- if (ret)
- return ret;
-
- if (((u16) val) == data)
- return 0;
-
- return -1;
-}
-
-static void por_fuelgauge_init(struct pmic *p)
-{
- u16 r_data0[16], r_data1[16], r_data2[16];
- u32 rewrite_count = 5;
- u32 check_count;
- u32 lock_count;
- u32 i = 0;
- u32 val;
- s32 ret = 0;
- char *status_msg;
-
- /* Delay 500 ms */
- mdelay(500);
- /* Initilize Configuration */
- pmic_reg_write(p, MAX17042_CONFIG, 0x2310);
-
-rewrite_model:
- check_count = 5;
- lock_count = 5;
-
- if (!rewrite_count--) {
- status_msg = "init failed!";
- goto error;
- }
-
- /* Unlock Model Access */
- pmic_reg_write(p, MAX17042_MLOCKReg1, MODEL_UNLOCK1);
- pmic_reg_write(p, MAX17042_MLOCKReg2, MODEL_UNLOCK2);
-
- /* Write/Read/Verify the Custom Model */
- ret = fg_write_regs(p, MAX17042_MODEL1, cell_character0,
- ARRAY_SIZE(cell_character0));
- if (ret)
- goto rewrite_model;
-
- ret = fg_write_regs(p, MAX17042_MODEL2, cell_character1,
- ARRAY_SIZE(cell_character1));
- if (ret)
- goto rewrite_model;
-
- ret = fg_write_regs(p, MAX17042_MODEL3, cell_character2,
- ARRAY_SIZE(cell_character2));
- if (ret)
- goto rewrite_model;
-
-check_model:
- if (!check_count--) {
- if (rewrite_count)
- goto rewrite_model;
- else
- status_msg = "check failed!";
-
- goto error;
- }
-
- ret = fg_read_regs(p, MAX17042_MODEL1, r_data0, ARRAY_SIZE(r_data0));
- if (ret)
- goto check_model;
-
- ret = fg_read_regs(p, MAX17042_MODEL2, r_data1, ARRAY_SIZE(r_data1));
- if (ret)
- goto check_model;
-
- ret = fg_read_regs(p, MAX17042_MODEL3, r_data2, ARRAY_SIZE(r_data2));
- if (ret)
- goto check_model;
-
- for (i = 0; i < 16; i++) {
- if ((cell_character0[i] != r_data0[i])
- || (cell_character1[i] != r_data1[i])
- || (cell_character2[i] != r_data2[i]))
- goto rewrite_model;
- }
-
-lock_model:
- if (!lock_count--) {
- if (rewrite_count)
- goto rewrite_model;
- else
- status_msg = "lock failed!";
-
- goto error;
- }
-
- /* Lock model access */
- pmic_reg_write(p, MAX17042_MLOCKReg1, MODEL_LOCK1);
- pmic_reg_write(p, MAX17042_MLOCKReg2, MODEL_LOCK2);
-
- /* Verify the model access is locked */
- ret = fg_read_regs(p, MAX17042_MODEL1, r_data0, ARRAY_SIZE(r_data0));
- if (ret)
- goto lock_model;
-
- ret = fg_read_regs(p, MAX17042_MODEL2, r_data1, ARRAY_SIZE(r_data1));
- if (ret)
- goto lock_model;
-
- ret = fg_read_regs(p, MAX17042_MODEL3, r_data2, ARRAY_SIZE(r_data2));
- if (ret)
- goto lock_model;
-
- for (i = 0; i < ARRAY_SIZE(r_data0); i++) {
- /* Check if model locked */
- if (r_data0[i] || r_data1[i] || r_data2[i])
- goto lock_model;
- }
-
- /* Write Custom Parameters */
- fg_write_and_verify(p, MAX17042_RCOMP0, RCOMP0);
- fg_write_and_verify(p, MAX17042_TEMPCO, TempCo);
-
- /* Delay at least 350mS */
- mdelay(350);
-
- /* Initialization Complete */
- pmic_reg_read(p, MAX17042_STATUS, &val);
- /* Write and Verify Status with POR bit Cleared */
- fg_write_and_verify(p, MAX17042_STATUS, val & ~MAX17042_POR);
-
- /* Delay at least 350 ms */
- mdelay(350);
-
- status_msg = "OK!";
-error:
- debug("%s: model init status: %s\n", p->name, status_msg);
- return;
-}
-
-static int power_update_battery(struct pmic *p, struct pmic *bat)
-{
- struct power_battery *pb = bat->pbat;
- unsigned int val;
- int ret = 0;
-
- if (pmic_probe(p)) {
- puts("Can't find max17042 fuel gauge\n");
- return -ENODEV;
- }
-
- ret |= pmic_reg_read(p, MAX17042_VFSOC, &val);
- pb->bat->state_of_chrg = (val >> 8);
-
- pmic_reg_read(p, MAX17042_VCELL, &val);
- debug("vfsoc: 0x%x\n", val);
- pb->bat->voltage_uV = ((val & 0xFFUL) >> 3) + ((val & 0xFF00) >> 3);
- pb->bat->voltage_uV = (pb->bat->voltage_uV * 625);
-
- pmic_reg_read(p, 0x05, &val);
- pb->bat->capacity = val >> 2;
-
- return ret;
-}
-
-static int power_check_battery(struct pmic *p, struct pmic *bat)
-{
- struct power_battery *pb = bat->pbat;
- unsigned int val;
- int ret = 0;
-
- if (pmic_probe(p)) {
- puts("Can't find max17042 fuel gauge\n");
- return -ENODEV;
- }
-
- ret |= pmic_reg_read(p, MAX17042_STATUS, &val);
- debug("fg status: 0x%x\n", val);
-
- if (val & MAX17042_POR)
- por_fuelgauge_init(p);
-
- ret |= pmic_reg_read(p, MAX17042_VERSION, &val);
- pb->bat->version = val;
-
- power_update_battery(p, bat);
- debug("fg ver: 0x%x\n", pb->bat->version);
- printf("BAT: state_of_charge(SOC):%d%%\n",
- pb->bat->state_of_chrg);
-
- printf(" voltage: %d.%6.6d [V] (expected to be %d [mAh])\n",
- pb->bat->voltage_uV / 1000000,
- pb->bat->voltage_uV % 1000000,
- pb->bat->capacity);
-
- if (pb->bat->voltage_uV > 3850000)
- pb->bat->state = EXT_SOURCE;
- else if (pb->bat->voltage_uV < 3600000 || pb->bat->state_of_chrg < 5)
- pb->bat->state = CHARGE;
- else
- pb->bat->state = NORMAL;
-
- return ret;
-}
-
-static struct power_fg power_fg_ops = {
- .fg_battery_check = power_check_battery,
- .fg_battery_update = power_update_battery,
-};
-
-int power_fg_init(unsigned char bus)
-{
- static const char name[] = "MAX17042_FG";
- struct pmic *p = pmic_alloc();
-
- if (!p) {
- printf("%s: POWER allocation error!\n", __func__);
- return -ENOMEM;
- }
-
- debug("Board Fuel Gauge init\n");
-
- p->name = name;
- p->interface = PMIC_I2C;
- p->number_of_regs = FG_NUM_OF_REGS;
- p->hw.i2c.addr = MAX17042_I2C_ADDR;
- p->hw.i2c.tx_num = 2;
- p->sensor_byte_order = PMIC_SENSOR_BYTE_ORDER_BIG;
- p->bus = bus;
-
- p->fg = &power_fg_ops;
- return 0;
-}
diff --git a/include/power/fg_battery_cell_params.h b/include/power/fg_battery_cell_params.h
deleted file mode 100644
index 500c8ea7174..00000000000
--- a/include/power/fg_battery_cell_params.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2012 Samsung Electronics
- * Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#ifndef __FG_BATTERY_CELL_PARAMS_H_
-#define __FG_BATTERY_CELL_PARAMS_H_
-
-#if defined(CONFIG_POWER_FG_MAX17042) && defined(CONFIG_TARGET_TRATS)
-
-/* Cell characteristics - Exynos4 TRATS development board */
-/* Shall be written to addr 0x80h */
-u16 cell_character0[16] = {
- 0xA2A0,
- 0xB6E0,
- 0xB850,
- 0xBAD0,
- 0xBB20,
- 0xBB70,
- 0xBBC0,
- 0xBC20,
- 0xBC80,
- 0xBCE0,
- 0xBD80,
- 0xBE20,
- 0xC090,
- 0xC420,
- 0xC910,
- 0xD070
-};
-
-/* Shall be written to addr 0x90h */
-u16 cell_character1[16] = {
- 0x0090,
- 0x1A50,
- 0x02F0,
- 0x2060,
- 0x2060,
- 0x2E60,
- 0x26A0,
- 0x2DB0,
- 0x2DB0,
- 0x1870,
- 0x2A20,
- 0x16F0,
- 0x08F0,
- 0x0D40,
- 0x08C0,
- 0x08C0
-};
-
-/* Shall be written to addr 0xA0h */
-u16 cell_character2[16] = {
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100,
- 0x0100
-};
-#endif
-#endif /* __FG_BATTERY_CELL_PARAMS_H_ */
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 57/87] power: Drop unused muic_max77693 driver and mfd code
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (55 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 56/87] power: Drop unused fg_max17042 driver and fuel gauge code Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 58/87] power: Drop unused muic_max8997 driver Simon Glass
` (30 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Lukasz Majewski
This driver is not used and has lain unconverted since:
fc47cf9d054 arm: exynos: i2c: Convert exynos boards to use DM_I2C
Drop it and the entire mfd directory, since there is nothing left.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/power/Makefile | 1 -
drivers/power/mfd/Makefile | 6 ---
drivers/power/mfd/muic_max77693.c | 77 -------------------------------
3 files changed, 84 deletions(-)
delete mode 100644 drivers/power/mfd/Makefile
delete mode 100644 drivers/power/mfd/muic_max77693.c
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 93003e97e01..ba64b2c5938 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -5,7 +5,6 @@
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += acpi_pmc/
obj-$(CONFIG_$(SPL_TPL_)POWER_DOMAIN) += domain/
-obj-y += mfd/
obj-y += pmic/
obj-y += regulator/
diff --git a/drivers/power/mfd/Makefile b/drivers/power/mfd/Makefile
deleted file mode 100644
index b5ec8f00bb0..00000000000
--- a/drivers/power/mfd/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2013 Samsung Electronics
-# Piotr Wilczek <p.wilczek@samsung.com>
-
-obj-$(CONFIG_POWER_MUIC_MAX77693) += muic_max77693.o
diff --git a/drivers/power/mfd/muic_max77693.c b/drivers/power/mfd/muic_max77693.c
deleted file mode 100644
index 36ee44b9a2c..00000000000
--- a/drivers/power/mfd/muic_max77693.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013 Samsung Electronics
- * Piotr Wilczek <p.wilczek@samsung.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <power/pmic.h>
-#include <power/power_chrg.h>
-#include <power/max77693_muic.h>
-#include <i2c.h>
-#include <errno.h>
-
-static int power_chrg_get_type(struct pmic *p)
-{
- unsigned int val;
- unsigned int charge_type, charger;
-
- /* if probe failed, return cable none */
- if (pmic_probe(p))
- return CHARGER_NO;
-
- pmic_reg_read(p, MAX77693_MUIC_STATUS2, &val);
-
- charge_type = val & MAX77693_MUIC_CHG_MASK;
-
- switch (charge_type) {
- case MAX77693_MUIC_CHG_NO:
- charger = CHARGER_NO;
- break;
- case MAX77693_MUIC_CHG_USB:
- case MAX77693_MUIC_CHG_USB_D:
- charger = CHARGER_USB;
- break;
- case MAX77693_MUIC_CHG_TA:
- case MAX77693_MUIC_CHG_TA_1A:
- charger = CHARGER_TA;
- break;
- case MAX77693_MUIC_CHG_TA_500:
- charger = CHARGER_TA_500;
- break;
- default:
- charger = CHARGER_UNKNOWN;
- break;
- }
-
- return charger;
-}
-
-static struct power_chrg power_chrg_muic_ops = {
- .chrg_type = power_chrg_get_type,
-};
-
-int power_muic_init(unsigned int bus)
-{
- static const char name[] = "MAX77693_MUIC";
- struct pmic *p = pmic_alloc();
-
- if (!p) {
- printf("%s: POWER allocation error!\n", __func__);
- return -ENOMEM;
- }
-
- debug("Board Micro USB Interface Controller init\n");
-
- p->name = name;
- p->interface = PMIC_I2C;
- p->number_of_regs = MUIC_NUM_OF_REGS;
- p->hw.i2c.addr = MAX77693_MUIC_I2C_ADDR;
- p->hw.i2c.tx_num = 1;
- p->bus = bus;
-
- p->chrg = &power_chrg_muic_ops;
-
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 58/87] power: Drop unused muic_max8997 driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (56 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 57/87] power: Drop unused muic_max77693 driver and mfd code Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 59/87] freescale: Drop unused pq-mds-pib driver Simon Glass
` (29 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Lukasz Majewski
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/power/pmic/Makefile | 1 -
drivers/power/pmic/muic_max8997.c | 74 -------------------------------
2 files changed, 75 deletions(-)
delete mode 100644 drivers/power/pmic/muic_max8997.c
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index c3180c58208..0b3b3d62d0e 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_POWER_TPS65218) += pmic_tps65218.o
ifeq ($(CONFIG_$(SPL_)POWER_LEGACY),y)
obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
-obj-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
obj-$(CONFIG_POWER_PCA9450) += pmic_pca9450.o
obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
obj-$(CONFIG_POWER_PFUZE3000) += pmic_pfuze3000.o
diff --git a/drivers/power/pmic/muic_max8997.c b/drivers/power/pmic/muic_max8997.c
deleted file mode 100644
index 969ce902395..00000000000
--- a/drivers/power/pmic/muic_max8997.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Samsung Electronics
- * Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <power/pmic.h>
-#include <power/power_chrg.h>
-#include <power/max8997_muic.h>
-#include <i2c.h>
-#include <errno.h>
-
-static int power_chrg_get_type(struct pmic *p)
-{
- unsigned int val;
- unsigned char charge_type, charger;
-
- if (pmic_probe(p))
- return CHARGER_NO;
-
- pmic_reg_read(p, MAX8997_MUIC_STATUS2, &val);
- charge_type = val & MAX8997_MUIC_CHG_MASK;
-
- switch (charge_type) {
- case MAX8997_MUIC_CHG_NO:
- charger = CHARGER_NO;
- break;
- case MAX8997_MUIC_CHG_USB:
- case MAX8997_MUIC_CHG_USB_D:
- charger = CHARGER_USB;
- break;
- case MAX8997_MUIC_CHG_TA:
- case MAX8997_MUIC_CHG_TA_1A:
- charger = CHARGER_TA;
- break;
- case MAX8997_MUIC_CHG_TA_500:
- charger = CHARGER_TA_500;
- break;
- default:
- charger = CHARGER_UNKNOWN;
- break;
- }
-
- return charger;
-}
-
-static struct power_chrg power_chrg_muic_ops = {
- .chrg_type = power_chrg_get_type,
-};
-
-int power_muic_init(unsigned int bus)
-{
- static const char name[] = "MAX8997_MUIC";
- struct pmic *p = pmic_alloc();
-
- if (!p) {
- printf("%s: POWER allocation error!\n", __func__);
- return -ENOMEM;
- }
-
- debug("Board Micro USB Interface Controller init\n");
-
- p->name = name;
- p->interface = PMIC_I2C;
- p->number_of_regs = MUIC_NUM_OF_REGS;
- p->hw.i2c.addr = MAX8997_MUIC_I2C_ADDR;
- p->hw.i2c.tx_num = 1;
- p->bus = bus;
-
- p->chrg = &power_chrg_muic_ops;
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 59/87] freescale: Drop unused pq-mds-pib driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (57 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 58/87] power: Drop unused muic_max8997 driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 60/87] rmobile: Drop CONFIG_RMOBILE Simon Glass
` (28 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/freescale/common/Makefile | 1 -
board/freescale/common/pq-mds-pib.c | 60 -----------------------------
board/freescale/common/pq-mds-pib.h | 9 -----
3 files changed, 70 deletions(-)
delete mode 100644 board/freescale/common/pq-mds-pib.c
delete mode 100644 board/freescale/common/pq-mds-pib.h
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 9d5f38bb225..bd035d60a58 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -36,7 +36,6 @@ obj-$(I2C_COMMON) += i2c_common.o
obj-$(CONFIG_FSL_USE_PCA9547_MUX) += i2c_mux.o
obj-$(CONFIG_$(SPL_)VID) += vid.o
obj-$(CONFIG_FSL_QIXIS) += qixis.o
-obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o
endif
diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c
deleted file mode 100644
index 162c8a954f0..00000000000
--- a/board/freescale/common/pq-mds-pib.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Tony Li <tony.li@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation;
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/io.h>
-
-#include "pq-mds-pib.h"
-
-int pib_init(void)
-{
- u8 val8;
- u8 orig_i2c_bus;
-
- /* Switch temporarily to I2C bus #2 */
- orig_i2c_bus = i2c_get_bus_num();
- i2c_set_bus_num(1);
-
- val8 = 0;
-#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE)
- /* Assign PIB PMC slot to desired PCI bus */
- i2c_write(0x23, 0x6, 1, &val8, 1);
- i2c_write(0x23, 0x7, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x23, 0x2, 1, &val8, 1);
- i2c_write(0x23, 0x3, 1, &val8, 1);
-
- val8 = 0;
- i2c_write(0x26, 0x6, 1, &val8, 1);
- val8 = 0x34;
- i2c_write(0x26, 0x7, 1, &val8, 1);
- val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */
- i2c_write(0x26, 0x2, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x26, 0x3, 1, &val8, 1);
-
- val8 = 0;
- i2c_write(0x27, 0x6, 1, &val8, 1);
- i2c_write(0x27, 0x7, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x27, 0x2, 1, &val8, 1);
- val8 = 0xef;
- i2c_write(0x27, 0x3, 1, &val8, 1);
-
- eieio();
-
- printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n");
-#endif
-
- /* Reset to original I2C bus */
- i2c_set_bus_num(orig_i2c_bus);
- return 0;
-}
diff --git a/board/freescale/common/pq-mds-pib.h b/board/freescale/common/pq-mds-pib.h
deleted file mode 100644
index 67066fd118d..00000000000
--- a/board/freescale/common/pq-mds-pib.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation;
- */
-
-extern int pib_init(void);
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 60/87] rmobile: Drop CONFIG_RMOBILE
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (58 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 59/87] freescale: Drop unused pq-mds-pib driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 61/87] rtc: Drop old and unused drivers Simon Glass
` (27 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Nobuhiro Iwamatsu
This has been renamed to CONFIG_ARCH_RMOBILE but this one was left behind.
It doesn't point to a directory that exists, so just drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/cpu/armv7/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 7d7907601ec..653eef8ad79 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -37,7 +37,6 @@ obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/
obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/
-obj-$(CONFIG_RMOBILE) += rmobile/
obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_VF610) += vf610/
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 61/87] rtc: Drop old and unused drivers
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (59 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 60/87] rmobile: Drop CONFIG_RMOBILE Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 62/87] mtd: Drop unused CONFIG_S32V234 Simon Glass
` (26 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
These drivers are not used and have not been converted to driver model.
Drop them and references to the non-existent CONFIG options they use.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/rtc/Makefile | 14 --
drivers/rtc/at91sam9_rtt.c | 78 -------
drivers/rtc/ds1302.c | 329 ----------------------------
drivers/rtc/ds1306.c | 438 -------------------------------------
drivers/rtc/ftrtc010.c | 122 -----------
drivers/rtc/imxdi.c | 223 -------------------
drivers/rtc/max6900.c | 105 ---------
drivers/rtc/mk48t59.c | 175 ---------------
drivers/rtc/mx27rtc.c | 64 ------
drivers/rtc/rs5c372.c | 256 ----------------------
drivers/rtc/s3c24x0_rtc.c | 149 -------------
drivers/rtc/x1205.c | 161 --------------
12 files changed, 2114 deletions(-)
delete mode 100644 drivers/rtc/at91sam9_rtt.c
delete mode 100644 drivers/rtc/ds1302.c
delete mode 100644 drivers/rtc/ds1306.c
delete mode 100644 drivers/rtc/ftrtc010.c
delete mode 100644 drivers/rtc/imxdi.c
delete mode 100644 drivers/rtc/max6900.c
delete mode 100644 drivers/rtc/mk48t59.c
delete mode 100644 drivers/rtc/mx27rtc.c
delete mode 100644 drivers/rtc/rs5c372.c
delete mode 100644 drivers/rtc/s3c24x0_rtc.c
delete mode 100644 drivers/rtc/x1205.c
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index acfd130bbc9..447551e15aa 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -6,49 +6,35 @@
obj-$(CONFIG_$(SPL_TPL_)DM_RTC) += rtc-uclass.o
-obj-$(CONFIG_RTC_AT91SAM9_RTT) += at91sam9_rtt.o
obj-$(CONFIG_RTC_ARMADA38X) += armada38x.o
obj-$(CONFIG_RTC_DAVINCI) += davinci.o
-obj-$(CONFIG_RTC_DS1302) += ds1302.o
-obj-$(CONFIG_RTC_DS1306) += ds1306.o
obj-$(CONFIG_RTC_DS1307) += ds1307.o
obj-$(CONFIG_RTC_DS1338) += ds1307.o
-obj-$(CONFIG_RTC_DS1339) += ds1307.o
obj-$(CONFIG_RTC_DS1337) += ds1337.o
obj-$(CONFIG_RTC_DS1374) += ds1374.o
-obj-$(CONFIG_RTC_DS1388) += ds1337.o
obj-$(CONFIG_RTC_DS3231) += ds3231.o
obj-$(CONFIG_RTC_DS3232) += ds3232.o
obj-$(CONFIG_RTC_EMULATION) += emul_rtc.o
-obj-$(CONFIG_RTC_FTRTC010) += ftrtc010.o
obj-$(CONFIG_RTC_HT1380) += ht1380.o
obj-$(CONFIG_SANDBOX) += i2c_rtc_emul.o
-obj-$(CONFIG_RTC_IMXDI) += imxdi.o
obj-$(CONFIG_RTC_ISL1208) += isl1208.o
obj-$(CONFIG_RTC_M41T62) += m41t62.o
-obj-$(CONFIG_RTC_MAX6900) += max6900.o
obj-$(CONFIG_RTC_MC13XXX) += mc13xxx-rtc.o
obj-$(CONFIG_RTC_MC146818) += mc146818.o
-obj-$(CONFIG_RTC_MCP79411) += ds1307.o
obj-$(CONFIG_MCFRTC) += mcfrtc.o
-obj-$(CONFIG_RTC_MK48T59) += mk48t59.o
obj-$(CONFIG_RTC_MV) += mvrtc.o
-obj-$(CONFIG_RTC_MX27) += mx27rtc.o
obj-$(CONFIG_RTC_MXS) += mxsrtc.o
obj-$(CONFIG_RTC_PCF8563) += pcf8563.o
obj-$(CONFIG_RTC_PCF2127) += pcf2127.o
obj-$(CONFIG_RTC_PL031) += pl031.o
obj-$(CONFIG_RTC_PT7C4338) += pt7c4338.o
-obj-$(CONFIG_RTC_RS5C372A) += rs5c372.o
obj-$(CONFIG_RTC_RV3028) += rv3028.o
obj-$(CONFIG_RTC_RV3029) += rv3029.o
obj-$(CONFIG_RTC_RV8803) += rv8803.o
obj-$(CONFIG_RTC_RX8025) += rx8025.o
obj-$(CONFIG_RTC_RX8010SJ) += rx8010sj.o
-obj-$(CONFIG_RTC_S3C24X0) += s3c24x0_rtc.o
obj-$(CONFIG_RTC_S35392A) += s35392a.o
obj-$(CONFIG_RTC_STM32) += stm32_rtc.o
obj-$(CONFIG_SANDBOX) += sandbox_rtc.o
-obj-$(CONFIG_RTC_X1205) += x1205.o
obj-$(CONFIG_RTC_ABX80X) += abx80x.o
obj-$(CONFIG_RTC_ZYNQMP) += zynqmp_rtc.o
diff --git a/drivers/rtc/at91sam9_rtt.c b/drivers/rtc/at91sam9_rtt.c
deleted file mode 100644
index 6f92660ef1d..00000000000
--- a/drivers/rtc/at91sam9_rtt.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
- */
-
-/*
- * Date & Time support for the internal Real-time Timer
- * of AT91SAM9260 and compatibles.
- * Compatible with the LinuX rtc driver workaround:
- * The RTT cannot be written to, but only reset.
- * The actual time is the sum of RTT and one of
- * the four GPBR registers.
- *
- * The at91sam9260 has 4 GPBR (0-3).
- * For their typical use see at91_gpbr.h !
- *
- * make sure u-boot and kernel use the same GPBR !
- */
-
-#include <common.h>
-#include <command.h>
-#include <rtc.h>
-#include <asm/io.h>
-#include <linux/errno.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_rtt.h>
-#include <asm/arch/at91_gpbr.h>
-
-int rtc_get (struct rtc_time *tmp)
-{
- at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT;
- at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
- ulong tim;
- ulong tim2;
- ulong off;
-
- do {
- tim = readl(&rtt->vr);
- tim2 = readl(&rtt->vr);
- } while (tim!=tim2);
- off = readl(&gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]);
- /* off==0 means time is invalid, but we ignore that */
- rtc_to_tm(tim+off, tmp);
- return 0;
-}
-
-int rtc_set (struct rtc_time *tmp)
-{
- at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT;
- at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
- ulong tim;
-
- tim = rtc_mktime(tmp);
-
- /* clear alarm, set prescaler to 32768, clear counter */
- writel(32768+AT91_RTT_RTTRST, &rtt->mr);
- writel(~0, &rtt->ar);
- writel(tim, &gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]);
- /* wait for counter clear to happen, takes less than a 1/32768th second */
- while (readl(&rtt->vr) != 0)
- ;
- return 0;
-}
-
-void rtc_reset (void)
-{
- at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT;
- at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
-
- /* clear alarm, set prescaler to 32768, clear counter */
- writel(32768+AT91_RTT_RTTRST, &rtt->mr);
- writel(~0, &rtt->ar);
- writel(0, &gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]);
- /* wait for counter clear to happen, takes less than a 1/32768th second */
- while (readl(&rtt->vr) != 0)
- ;
-}
diff --git a/drivers/rtc/ds1302.c b/drivers/rtc/ds1302.c
deleted file mode 100644
index 189607c3e02..00000000000
--- a/drivers/rtc/ds1302.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * ds1302.c - Support for the Dallas Semiconductor DS1302 Timekeeping Chip
- *
- * Rex G. Feany <rfeany@zumanetworks.com>
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <rtc.h>
-#include <linux/delay.h>
-
-/* GPP Pins */
-#define DATA 0x200
-#define SCLK 0x400
-#define RST 0x800
-
-/* Happy Fun Defines(tm) */
-#define RESET rtc_go_low(RST), rtc_go_low(SCLK)
-#define N_RESET rtc_go_high(RST), rtc_go_low(SCLK)
-
-#define CLOCK_HIGH rtc_go_high(SCLK)
-#define CLOCK_LOW rtc_go_low(SCLK)
-
-#define DATA_HIGH rtc_go_high(DATA)
-#define DATA_LOW rtc_go_low(DATA)
-#define DATA_READ (GTREGREAD(GPP_VALUE) & DATA)
-
-#undef RTC_DEBUG
-
-#ifdef RTC_DEBUG
-# define DPRINTF(x,args...) printf("ds1302: " x , ##args)
-static inline void DUMP(const char *ptr, int num)
-{
- while (num--) printf("%x ", *ptr++);
- printf("]\n");
-}
-#else
-# define DPRINTF(x,args...)
-# define DUMP(ptr, num)
-#endif
-
-/* time data format for DS1302 */
-struct ds1302_st
-{
- unsigned char CH:1; /* clock halt 1=stop 0=start */
- unsigned char sec10:3;
- unsigned char sec:4;
-
- unsigned char zero0:1;
- unsigned char min10:3;
- unsigned char min:4;
-
- unsigned char fmt:1; /* 1=12 hour 0=24 hour */
- unsigned char zero1:1;
- unsigned char hr10:2; /* 10 (0-2) or am/pm (am/pm, 0-1) */
- unsigned char hr:4;
-
- unsigned char zero2:2;
- unsigned char date10:2;
- unsigned char date:4;
-
- unsigned char zero3:3;
- unsigned char month10:1;
- unsigned char month:4;
-
- unsigned char zero4:5;
- unsigned char day:3; /* day of week */
-
- unsigned char year10:4;
- unsigned char year:4;
-
- unsigned char WP:1; /* write protect 1=protect 0=unprot */
- unsigned char zero5:7;
-};
-
-static int ds1302_initted=0;
-
-/* Pin control */
-static inline void
-rtc_go_high(unsigned int mask)
-{
- unsigned int f = GTREGREAD(GPP_VALUE) | mask;
-
- GT_REG_WRITE(GPP_VALUE, f);
-}
-
-static inline void
-rtc_go_low(unsigned int mask)
-{
- unsigned int f = GTREGREAD(GPP_VALUE) & ~mask;
-
- GT_REG_WRITE(GPP_VALUE, f);
-}
-
-static inline void
-rtc_go_input(unsigned int mask)
-{
- unsigned int f = GTREGREAD(GPP_IO_CONTROL) & ~mask;
-
- GT_REG_WRITE(GPP_IO_CONTROL, f);
-}
-
-static inline void
-rtc_go_output(unsigned int mask)
-{
- unsigned int f = GTREGREAD(GPP_IO_CONTROL) | mask;
-
- GT_REG_WRITE(GPP_IO_CONTROL, f);
-}
-
-/* Access data in RTC */
-
-static void
-write_byte(unsigned char b)
-{
- int i;
- unsigned char mask=1;
-
- for(i=0;i<8;i++) {
- CLOCK_LOW; /* Lower clock */
- (b&mask)?DATA_HIGH:DATA_LOW; /* set data */
- udelay(1);
- CLOCK_HIGH; /* latch data with rising clock */
- udelay(1);
- mask=mask<<1;
- }
-}
-
-static unsigned char
-read_byte(void)
-{
- int i;
- unsigned char mask=1;
- unsigned char b=0;
-
- for(i=0;i<8;i++) {
- CLOCK_LOW;
- udelay(1);
- if (DATA_READ) b|=mask; /* if this bit is high, set in b */
- CLOCK_HIGH; /* clock out next bit */
- udelay(1);
- mask=mask<<1;
- }
- return b;
-}
-
-static void
-read_ser_drv(unsigned char addr, unsigned char *buf, int count)
-{
- int i;
-#ifdef RTC_DEBUG
- char *foo = buf;
-#endif
-
- DPRINTF("READ 0x%x bytes @ 0x%x [ ", count, addr);
-
- addr|=1; /* READ */
- N_RESET;
- udelay(4);
- write_byte(addr);
- rtc_go_input(DATA); /* Put gpp pin into input mode */
- udelay(1);
- for(i=0;i<count;i++) *(buf++)=read_byte();
- RESET;
- rtc_go_output(DATA);/* Reset gpp for output */
- udelay(4);
-
- DUMP(foo, count);
-}
-
-static void
-write_ser_drv(unsigned char addr, unsigned char *buf, int count)
-{
- int i;
-
- DPRINTF("WRITE 0x%x bytes @ 0x%x [ ", count, addr);
- DUMP(buf, count);
-
- addr&=~1; /* WRITE */
- N_RESET;
- udelay(4);
- write_byte(addr);
- for(i=0;i<count;i++) write_byte(*(buf++));
- RESET;
- udelay(4);
-
-}
-
-void
-rtc_init(void)
-{
- struct ds1302_st bbclk;
- unsigned char b;
- int mod;
-
- DPRINTF("init\n");
-
- rtc_go_output(DATA|SCLK|RST);
-
- /* disable write protect */
- b = 0;
- write_ser_drv(0x8e,&b,1);
-
- /* enable trickle */
- b = 0xa5; /* 1010.0101 */
- write_ser_drv(0x90,&b,1);
-
- /* read burst */
- read_ser_drv(0xbe, (unsigned char *)&bbclk, 8);
-
- /* Sanity checks */
- mod = 0;
- if (bbclk.CH) {
- printf("ds1302: Clock was halted, starting clock\n");
- bbclk.CH=0;
- mod=1;
- }
-
- if (bbclk.fmt) {
- printf("ds1302: Clock was in 12 hour mode, fixing\n");
- bbclk.fmt=0;
- mod=1;
- }
-
- if (bbclk.year>9) {
- printf("ds1302: Year was corrupted, fixing\n");
- bbclk.year10=100/10; /* 2000 - why not? ;) */
- bbclk.year=0;
- mod=1;
- }
-
- /* Write out the changes if needed */
- if (mod) {
- /* enable write protect */
- bbclk.WP = 1;
- write_ser_drv(0xbe,(unsigned char *)&bbclk,8);
- } else {
- /* Else just turn write protect on */
- b = 0x80;
- write_ser_drv(0x8e,&b,1);
- }
- DPRINTF("init done\n");
-
- ds1302_initted=1;
-}
-
-void
-rtc_reset(void)
-{
- if(!ds1302_initted) rtc_init();
- /* TODO */
-}
-
-int
-rtc_get(struct rtc_time *tmp)
-{
- int rel = 0;
- struct ds1302_st bbclk;
-
- if(!ds1302_initted) rtc_init();
-
- read_ser_drv(0xbe,(unsigned char *)&bbclk, 8); /* read burst */
-
- if (bbclk.CH) {
- printf("ds1302: rtc_get: Clock was halted, clock probably "
- "corrupt\n");
- rel = -1;
- }
-
- tmp->tm_sec=10*bbclk.sec10+bbclk.sec;
- tmp->tm_min=10*bbclk.min10+bbclk.min;
- tmp->tm_hour=10*bbclk.hr10+bbclk.hr;
- tmp->tm_wday=bbclk.day;
- tmp->tm_mday=10*bbclk.date10+bbclk.date;
- tmp->tm_mon=10*bbclk.month10+bbclk.month;
- tmp->tm_year=10*bbclk.year10+bbclk.year + 1900;
-
- tmp->tm_yday = 0;
- tmp->tm_isdst= 0;
-
- DPRINTF("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
-
- return rel;
-}
-
-int rtc_set(struct rtc_time *tmp)
-{
- struct ds1302_st bbclk;
- unsigned char b=0;
-
- if(!ds1302_initted) rtc_init();
-
- DPRINTF("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
- memset(&bbclk,0,sizeof(bbclk));
- bbclk.CH=0; /* dont halt */
- bbclk.WP=1; /* write protect when we're done */
-
- bbclk.sec10=tmp->tm_sec/10;
- bbclk.sec=tmp->tm_sec%10;
-
- bbclk.min10=tmp->tm_min/10;
- bbclk.min=tmp->tm_min%10;
-
- bbclk.hr10=tmp->tm_hour/10;
- bbclk.hr=tmp->tm_hour%10;
-
- bbclk.day=tmp->tm_wday;
-
- bbclk.date10=tmp->tm_mday/10;
- bbclk.date=tmp->tm_mday%10;
-
- bbclk.month10=tmp->tm_mon/10;
- bbclk.month=tmp->tm_mon%10;
-
- tmp->tm_year -= 1900;
- bbclk.year10=tmp->tm_year/10;
- bbclk.year=tmp->tm_year%10;
-
- write_ser_drv(0x8e,&b,1); /* disable write protect */
- write_ser_drv(0xbe,(unsigned char *)&bbclk, 8); /* write burst */
-
- return 0;
-}
diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c
deleted file mode 100644
index 36d615812b2..00000000000
--- a/drivers/rtc/ds1306.c
+++ /dev/null
@@ -1,438 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002 SIXNET, dge@sixnetio.com.
- *
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- */
-
-/*
- * Date & Time support for DS1306 RTC using SPI:
- *
- * - SXNI855T: it uses its own soft SPI here in this file
- * - all other: use the external spi_xfer() function
- * (see include/spi.h)
- */
-
-#include <common.h>
-#include <command.h>
-#include <rtc.h>
-#include <spi.h>
-#include <linux/delay.h>
-
-#define RTC_SECONDS 0x00
-#define RTC_MINUTES 0x01
-#define RTC_HOURS 0x02
-#define RTC_DAY_OF_WEEK 0x03
-#define RTC_DATE_OF_MONTH 0x04
-#define RTC_MONTH 0x05
-#define RTC_YEAR 0x06
-
-#define RTC_SECONDS_ALARM0 0x07
-#define RTC_MINUTES_ALARM0 0x08
-#define RTC_HOURS_ALARM0 0x09
-#define RTC_DAY_OF_WEEK_ALARM0 0x0a
-
-#define RTC_SECONDS_ALARM1 0x0b
-#define RTC_MINUTES_ALARM1 0x0c
-#define RTC_HOURS_ALARM1 0x0d
-#define RTC_DAY_OF_WEEK_ALARM1 0x0e
-
-#define RTC_CONTROL 0x0f
-#define RTC_STATUS 0x10
-#define RTC_TRICKLE_CHARGER 0x11
-
-#define RTC_USER_RAM_BASE 0x20
-
-/* ************************************************************************* */
-#ifdef CONFIG_SXNI855T /* !!! SHOULD BE CHANGED TO NEW CODE !!! */
-
-static void soft_spi_send (unsigned char n);
-static unsigned char soft_spi_read (void);
-static void init_spi (void);
-
-/*-----------------------------------------------------------------------
- * Definitions
- */
-
-#define PB_SPISCK 0x00000002 /* PB 30 */
-#define PB_SPIMOSI 0x00000004 /* PB 29 */
-#define PB_SPIMISO 0x00000008 /* PB 28 */
-#define PB_SPI_CE 0x00010000 /* PB 15 */
-
-/* ------------------------------------------------------------------------- */
-
-/* read clock time from DS1306 and return it in *tmp */
-int rtc_get (struct rtc_time *tmp)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- unsigned char spi_byte; /* Data Byte */
-
- init_spi (); /* set port B for software SPI */
-
- /* Now we can enable the DS1306 RTC */
- immap->im_cpm.cp_pbdat |= PB_SPI_CE;
- udelay(10);
-
- /* Shift out the address (0) of the time in the Clock Chip */
- soft_spi_send (0);
-
- /* Put the clock readings into the rtc_time structure */
- tmp->tm_sec = bcd2bin (soft_spi_read ()); /* Read seconds */
- tmp->tm_min = bcd2bin (soft_spi_read ()); /* Read minutes */
-
- /* Hours are trickier */
- spi_byte = soft_spi_read (); /* Read Hours into temporary value */
- if (spi_byte & 0x40) {
- /* 12 hour mode bit is set (time is in 1-12 format) */
- if (spi_byte & 0x20) {
- /* since PM we add 11 to get 0-23 for hours */
- tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) + 11;
- } else {
- /* since AM we subtract 1 to get 0-23 for hours */
- tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) - 1;
- }
- } else {
- /* Otherwise, 0-23 hour format */
- tmp->tm_hour = (bcd2bin (spi_byte & 0x3F));
- }
-
- soft_spi_read (); /* Read and discard Day of week */
- tmp->tm_mday = bcd2bin (soft_spi_read ()); /* Read Day of the Month */
- tmp->tm_mon = bcd2bin (soft_spi_read ()); /* Read Month */
-
- /* Read Year and convert to this century */
- tmp->tm_year = bcd2bin (soft_spi_read ()) + 2000;
-
- /* Now we can disable the DS1306 RTC */
- immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
- udelay(10);
-
- rtc_calc_weekday(tmp); /* Determine the day of week */
-
- debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* set clock time in DS1306 RTC and in MPC8xx RTC */
-int rtc_set (struct rtc_time *tmp)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- init_spi (); /* set port B for software SPI */
-
- /* Now we can enable the DS1306 RTC */
- immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
- udelay(10);
-
- /* First disable write protect in the clock chip control register */
- soft_spi_send (0x8F); /* send address of the control register */
- soft_spi_send (0x00); /* send control register contents */
-
- /* Now disable the DS1306 to terminate the write */
- immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;
- udelay(10);
-
- /* Now enable the DS1306 to initiate a new write */
- immap->im_cpm.cp_pbdat |= PB_SPI_CE;
- udelay(10);
-
- /* Next, send the address of the clock time write registers */
- soft_spi_send (0x80); /* send address of the first time register */
-
- /* Use Burst Mode to send all of the time data to the clock */
- bin2bcd (tmp->tm_sec);
- soft_spi_send (bin2bcd (tmp->tm_sec)); /* Send Seconds */
- soft_spi_send (bin2bcd (tmp->tm_min)); /* Send Minutes */
- soft_spi_send (bin2bcd (tmp->tm_hour)); /* Send Hour */
- soft_spi_send (bin2bcd (tmp->tm_wday)); /* Send Day of the Week */
- soft_spi_send (bin2bcd (tmp->tm_mday)); /* Send Day of Month */
- soft_spi_send (bin2bcd (tmp->tm_mon)); /* Send Month */
- soft_spi_send (bin2bcd (tmp->tm_year - 2000)); /* Send Year */
-
- /* Now we can disable the Clock chip to terminate the burst write */
- immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
- udelay(10);
-
- /* Now we can enable the Clock chip to initiate a new write */
- immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
- udelay(10);
-
- /* First we Enable write protect in the clock chip control register */
- soft_spi_send (0x8F); /* send address of the control register */
- soft_spi_send (0x40); /* send out Control Register contents */
-
- /* Now disable the DS1306 */
- immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
- udelay(10);
-
- /* Set standard MPC8xx clock to the same time so Linux will
- * see the time even if it doesn't have a DS1306 clock driver.
- * This helps with experimenting with standard kernels.
- */
- {
- ulong tim;
-
- tim = rtc_mktime(tmp);
-
- immap->im_sitk.sitk_rtck = KAPWR_KEY;
- immap->im_sit.sit_rtc = tim;
- }
-
- debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* Initialize Port B for software SPI */
-static void init_spi (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- /* Force output pins to begin at logic 0 */
- immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
-
- /* Set these 3 signals as outputs */
- immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK);
-
- immap->im_cpm.cp_pbdir &= ~PB_SPIMISO; /* Make MISO pin an input */
- udelay(10);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
-static void soft_spi_send (unsigned char n)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- unsigned char bitpos; /* bit position to receive */
- unsigned char i; /* Loop Control */
-
- /* bit position to send, start with most significant bit */
- bitpos = 0x80;
-
- /* Send 8 bits to software SPI */
- for (i = 0; i < 8; i++) { /* Loop for 8 bits */
- immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */
-
- if (n & bitpos)
- immap->im_cpm.cp_pbdat |= PB_SPIMOSI; /* Set MOSI to 1 */
- else
- immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI; /* Set MOSI to 0 */
- udelay(10);
-
- immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
- udelay(10);
-
- bitpos >>= 1; /* Shift for next bit position */
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
-static unsigned char soft_spi_read (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- unsigned char spi_byte = 0; /* Return value, assume success */
- unsigned char bitpos; /* bit position to receive */
- unsigned char i; /* Loop Control */
-
- /* bit position to receive, start with most significant bit */
- bitpos = 0x80;
-
- /* Read 8 bits here */
- for (i = 0; i < 8; i++) { /* Do 8 bits in loop */
- immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */
- udelay(10);
- if (immap->im_cpm.cp_pbdat & PB_SPIMISO) /* Get a bit of data */
- spi_byte |= bitpos; /* Set data accordingly */
- immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
- udelay(10);
- bitpos >>= 1; /* Shift for next bit position */
- }
-
- return spi_byte; /* Return the byte read */
-}
-
-/* ------------------------------------------------------------------------- */
-
-void rtc_reset (void)
-{
- return; /* nothing to do */
-}
-
-#else /* not CONFIG_SXNI855T */
-/* ************************************************************************* */
-
-static unsigned char rtc_read (unsigned char reg);
-static void rtc_write (unsigned char reg, unsigned char val);
-
-static struct spi_slave *slave;
-
-/* read clock time from DS1306 and return it in *tmp */
-int rtc_get (struct rtc_time *tmp)
-{
- unsigned char sec, min, hour, mday, wday, mon, year;
-
- /*
- * Assuming Vcc = 2.0V (lowest speed)
- *
- * REVISIT: If we add an rtc_init() function we can do this
- * step just once.
- */
- if (!slave) {
- slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
- SPI_MODE_3 | SPI_CS_HIGH);
- if (!slave)
- return;
- }
-
- if (spi_claim_bus(slave))
- return;
-
- sec = rtc_read (RTC_SECONDS);
- min = rtc_read (RTC_MINUTES);
- hour = rtc_read (RTC_HOURS);
- mday = rtc_read (RTC_DATE_OF_MONTH);
- wday = rtc_read (RTC_DAY_OF_WEEK);
- mon = rtc_read (RTC_MONTH);
- year = rtc_read (RTC_YEAR);
-
- spi_release_bus(slave);
-
- debug ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
- "hr: %02x min: %02x sec: %02x\n",
- year, mon, mday, wday, hour, min, sec);
- debug ("Alarms[0]: wday: %02x hour: %02x min: %02x sec: %02x\n",
- rtc_read (RTC_DAY_OF_WEEK_ALARM0),
- rtc_read (RTC_HOURS_ALARM0),
- rtc_read (RTC_MINUTES_ALARM0), rtc_read (RTC_SECONDS_ALARM0));
- debug ("Alarms[1]: wday: %02x hour: %02x min: %02x sec: %02x\n",
- rtc_read (RTC_DAY_OF_WEEK_ALARM1),
- rtc_read (RTC_HOURS_ALARM1),
- rtc_read (RTC_MINUTES_ALARM1), rtc_read (RTC_SECONDS_ALARM1));
-
- tmp->tm_sec = bcd2bin (sec & 0x7F); /* convert Seconds */
- tmp->tm_min = bcd2bin (min & 0x7F); /* convert Minutes */
-
- /* convert Hours */
- tmp->tm_hour = (hour & 0x40)
- ? ((hour & 0x20) /* 12 hour mode */
- ? bcd2bin (hour & 0x1F) + 11 /* PM */
- : bcd2bin (hour & 0x1F) - 1 /* AM */
- )
- : bcd2bin (hour & 0x3F); /* 24 hour mode */
-
- tmp->tm_mday = bcd2bin (mday & 0x3F); /* convert Day of the Month */
- tmp->tm_mon = bcd2bin (mon & 0x1F); /* convert Month */
- tmp->tm_year = bcd2bin (year) + 2000; /* convert Year */
- tmp->tm_wday = bcd2bin (wday & 0x07) - 1; /* convert Day of the Week */
- tmp->tm_yday = 0;
- tmp->tm_isdst = 0;
-
- debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* set clock time from *tmp in DS1306 RTC */
-int rtc_set (struct rtc_time *tmp)
-{
- /* Assuming Vcc = 2.0V (lowest speed) */
- if (!slave) {
- slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
- SPI_MODE_3 | SPI_CS_HIGH);
- if (!slave)
- return;
- }
-
- if (spi_claim_bus(slave))
- return;
-
- debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
- rtc_write (RTC_SECONDS, bin2bcd (tmp->tm_sec));
- rtc_write (RTC_MINUTES, bin2bcd (tmp->tm_min));
- rtc_write (RTC_HOURS, bin2bcd (tmp->tm_hour));
- rtc_write (RTC_DAY_OF_WEEK, bin2bcd (tmp->tm_wday + 1));
- rtc_write (RTC_DATE_OF_MONTH, bin2bcd (tmp->tm_mday));
- rtc_write (RTC_MONTH, bin2bcd (tmp->tm_mon));
- rtc_write (RTC_YEAR, bin2bcd (tmp->tm_year - 2000));
-
- spi_release_bus(slave);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* reset the DS1306 */
-void rtc_reset (void)
-{
- /* Assuming Vcc = 2.0V (lowest speed) */
- if (!slave) {
- slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
- SPI_MODE_3 | SPI_CS_HIGH);
- if (!slave)
- return;
- }
-
- if (spi_claim_bus(slave))
- return;
-
- /* clear the control register */
- rtc_write (RTC_CONTROL, 0x00); /* 1st step: reset WP */
- rtc_write (RTC_CONTROL, 0x00); /* 2nd step: reset 1Hz, AIE1, AIE0 */
-
- /* reset all alarms */
- rtc_write (RTC_SECONDS_ALARM0, 0x00);
- rtc_write (RTC_SECONDS_ALARM1, 0x00);
- rtc_write (RTC_MINUTES_ALARM0, 0x00);
- rtc_write (RTC_MINUTES_ALARM1, 0x00);
- rtc_write (RTC_HOURS_ALARM0, 0x00);
- rtc_write (RTC_HOURS_ALARM1, 0x00);
- rtc_write (RTC_DAY_OF_WEEK_ALARM0, 0x00);
- rtc_write (RTC_DAY_OF_WEEK_ALARM1, 0x00);
-
- spi_release_bus(slave);
-}
-
-/* ------------------------------------------------------------------------- */
-
-static unsigned char rtc_read (unsigned char reg)
-{
- int ret;
-
- ret = spi_w8r8(slave, reg);
- return ret < 0 ? 0 : ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void rtc_write (unsigned char reg, unsigned char val)
-{
- unsigned char dout[2]; /* SPI Output Data Bytes */
- unsigned char din[2]; /* SPI Input Data Bytes */
-
- dout[0] = 0x80 | reg;
- dout[1] = val;
-
- spi_xfer (slave, 16, dout, din, SPI_XFER_BEGIN | SPI_XFER_END);
-}
-
-#endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */
diff --git a/drivers/rtc/ftrtc010.c b/drivers/rtc/ftrtc010.c
deleted file mode 100644
index e384922f473..00000000000
--- a/drivers/rtc/ftrtc010.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Faraday FTRTC010 Real Time Clock
- *
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- */
-
-#include <config.h>
-#include <common.h>
-#include <log.h>
-#include <rtc.h>
-#include <asm/io.h>
-
-struct ftrtc010 {
- unsigned int sec; /* 0x00 */
- unsigned int min; /* 0x04 */
- unsigned int hour; /* 0x08 */
- unsigned int day; /* 0x0c */
- unsigned int alarm_sec; /* 0x10 */
- unsigned int alarm_min; /* 0x14 */
- unsigned int alarm_hour; /* 0x18 */
- unsigned int record; /* 0x1c */
- unsigned int cr; /* 0x20 */
- unsigned int wsec; /* 0x24 */
- unsigned int wmin; /* 0x28 */
- unsigned int whour; /* 0x2c */
- unsigned int wday; /* 0x30 */
- unsigned int intr; /* 0x34 */
- unsigned int div; /* 0x38 */
- unsigned int rev; /* 0x3c */
-};
-
-/*
- * RTC Control Register
- */
-#define FTRTC010_CR_ENABLE (1 << 0)
-#define FTRTC010_CR_INTERRUPT_SEC (1 << 1) /* per second irq */
-#define FTRTC010_CR_INTERRUPT_MIN (1 << 2) /* per minute irq */
-#define FTRTC010_CR_INTERRUPT_HR (1 << 3) /* per hour irq */
-#define FTRTC010_CR_INTERRUPT_DAY (1 << 4) /* per day irq */
-
-static struct ftrtc010 *rtc = (struct ftrtc010 *)CONFIG_FTRTC010_BASE;
-
-static void ftrtc010_enable(void)
-{
- writel(FTRTC010_CR_ENABLE, &rtc->cr);
-}
-
-/*
- * return current time in seconds
- */
-static unsigned long ftrtc010_time(void)
-{
- unsigned long day;
- unsigned long hour;
- unsigned long minute;
- unsigned long second;
- unsigned long second2;
-
- do {
- second = readl(&rtc->sec);
- day = readl(&rtc->day);
- hour = readl(&rtc->hour);
- minute = readl(&rtc->min);
- second2 = readl(&rtc->sec);
- } while (second != second2);
-
- return day * 24 * 60 * 60 + hour * 60 * 60 + minute * 60 + second;
-}
-
-/*
- * Get the current time from the RTC
- */
-
-int rtc_get(struct rtc_time *tmp)
-{
- unsigned long now;
-
- debug("%s(): record register: %x\n",
- __func__, readl(&rtc->record));
-
-#ifdef CFG_FTRTC010_PCLK
- now = (ftrtc010_time() + readl(&rtc->record)) / RTC_DIV_COUNT;
-#else /* CFG_FTRTC010_EXTCLK */
- now = ftrtc010_time() + readl(&rtc->record);
-#endif
-
- rtc_to_tm(now, tmp);
-
- return 0;
-}
-
-/*
- * Set the RTC
- */
-int rtc_set(struct rtc_time *tmp)
-{
- unsigned long new;
- unsigned long now;
-
- debug("%s(): DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- __func__,
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
- new = rtc_mktime(tmp);
-
- now = ftrtc010_time();
-
- debug("%s(): write %lx to record register\n", __func__, new - now);
-
- writel(new - now, &rtc->record);
-
- return 0;
-}
-
-void rtc_reset(void)
-{
- debug("%s()\n", __func__);
- ftrtc010_enable();
-}
diff --git a/drivers/rtc/imxdi.c b/drivers/rtc/imxdi.c
deleted file mode 100644
index e3a1393266c..00000000000
--- a/drivers/rtc/imxdi.c
+++ /dev/null
@@ -1,223 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2009-2012 ADVANSEE
- * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
- *
- * Based on the Linux rtc-imxdi.c driver, which is:
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2010 Orex Computed Radiography
- */
-
-/*
- * Date & Time support for Freescale i.MX DryIce RTC
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/compat.h>
-#include <rtc.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-
-/* DryIce Register Definitions */
-
-struct imxdi_regs {
- u32 dtcmr; /* Time Counter MSB Reg */
- u32 dtclr; /* Time Counter LSB Reg */
- u32 dcamr; /* Clock Alarm MSB Reg */
- u32 dcalr; /* Clock Alarm LSB Reg */
- u32 dcr; /* Control Reg */
- u32 dsr; /* Status Reg */
- u32 dier; /* Interrupt Enable Reg */
-};
-
-#define DCAMR_UNSET 0xFFFFFFFF /* doomsday - 1 sec */
-
-#define DCR_TCE (1 << 3) /* Time Counter Enable */
-
-#define DSR_WBF (1 << 10) /* Write Busy Flag */
-#define DSR_WNF (1 << 9) /* Write Next Flag */
-#define DSR_WCF (1 << 8) /* Write Complete Flag */
-#define DSR_WEF (1 << 7) /* Write Error Flag */
-#define DSR_CAF (1 << 4) /* Clock Alarm Flag */
-#define DSR_NVF (1 << 1) /* Non-Valid Flag */
-#define DSR_SVF (1 << 0) /* Security Violation Flag */
-
-#define DIER_WNIE (1 << 9) /* Write Next Interrupt Enable */
-#define DIER_WCIE (1 << 8) /* Write Complete Interrupt Enable */
-#define DIER_WEIE (1 << 7) /* Write Error Interrupt Enable */
-#define DIER_CAIE (1 << 4) /* Clock Alarm Interrupt Enable */
-
-/* Driver Private Data */
-
-struct imxdi_data {
- struct imxdi_regs __iomem *regs;
- int init_done;
-};
-
-static struct imxdi_data data;
-
-/*
- * This function attempts to clear the dryice write-error flag.
- *
- * A dryice write error is similar to a bus fault and should not occur in
- * normal operation. Clearing the flag requires another write, so the root
- * cause of the problem may need to be fixed before the flag can be cleared.
- */
-static void clear_write_error(void)
-{
- int cnt;
-
- puts("### Warning: RTC - Register write error!\n");
-
- /* clear the write error flag */
- __raw_writel(DSR_WEF, &data.regs->dsr);
-
- /* wait for it to take effect */
- for (cnt = 0; cnt < 1000; cnt++) {
- if ((__raw_readl(&data.regs->dsr) & DSR_WEF) == 0)
- return;
- udelay(10);
- }
- puts("### Error: RTC - Cannot clear write-error flag!\n");
-}
-
-/*
- * Write a dryice register and wait until it completes.
- *
- * Use interrupt flags to determine when the write has completed.
- */
-#define DI_WRITE_WAIT(val, reg) \
-( \
- /* do the register write */ \
- __raw_writel((val), &data.regs->reg), \
- \
- di_write_wait((val), #reg) \
-)
-static int di_write_wait(u32 val, const char *reg)
-{
- int cnt;
- int ret = 0;
- int rc = 0;
-
- /* wait for the write to finish */
- for (cnt = 0; cnt < 100; cnt++) {
- if ((__raw_readl(&data.regs->dsr) & (DSR_WCF | DSR_WEF)) != 0) {
- ret = 1;
- break;
- }
- udelay(10);
- }
- if (ret == 0)
- printf("### Warning: RTC - Write-wait timeout "
- "val = 0x%.8x reg = %s\n", val, reg);
-
- /* check for write error */
- if (__raw_readl(&data.regs->dsr) & DSR_WEF) {
- clear_write_error();
- rc = -1;
- }
-
- return rc;
-}
-
-/*
- * Initialize dryice hardware
- */
-static int di_init(void)
-{
- int rc = 0;
-
- data.regs = (struct imxdi_regs __iomem *)IMX_DRYICE_BASE;
-
- /* mask all interrupts */
- __raw_writel(0, &data.regs->dier);
-
- /* put dryice into valid state */
- if (__raw_readl(&data.regs->dsr) & DSR_NVF) {
- rc = DI_WRITE_WAIT(DSR_NVF | DSR_SVF, dsr);
- if (rc)
- goto err;
- }
-
- /* initialize alarm */
- rc = DI_WRITE_WAIT(DCAMR_UNSET, dcamr);
- if (rc)
- goto err;
- rc = DI_WRITE_WAIT(0, dcalr);
- if (rc)
- goto err;
-
- /* clear alarm flag */
- if (__raw_readl(&data.regs->dsr) & DSR_CAF) {
- rc = DI_WRITE_WAIT(DSR_CAF, dsr);
- if (rc)
- goto err;
- }
-
- /* the timer won't count if it has never been written to */
- if (__raw_readl(&data.regs->dtcmr) == 0) {
- rc = DI_WRITE_WAIT(0, dtcmr);
- if (rc)
- goto err;
- }
-
- /* start keeping time */
- if (!(__raw_readl(&data.regs->dcr) & DCR_TCE)) {
- rc = DI_WRITE_WAIT(__raw_readl(&data.regs->dcr) | DCR_TCE, dcr);
- if (rc)
- goto err;
- }
-
- data.init_done = 1;
- return 0;
-
-err:
- return rc;
-}
-
-int rtc_get(struct rtc_time *tmp)
-{
- unsigned long now;
- int rc = 0;
-
- if (!data.init_done) {
- rc = di_init();
- if (rc)
- goto err;
- }
-
- now = __raw_readl(&data.regs->dtcmr);
- rtc_to_tm(now, tmp);
-
-err:
- return rc;
-}
-
-int rtc_set(struct rtc_time *tmp)
-{
- unsigned long now;
- int rc;
-
- if (!data.init_done) {
- rc = di_init();
- if (rc)
- goto err;
- }
-
- now = rtc_mktime(tmp);
- /* zero the fractional part first */
- rc = DI_WRITE_WAIT(0, dtclr);
- if (rc == 0)
- rc = DI_WRITE_WAIT(now, dtcmr);
-
-err:
- return rc;
-}
-
-void rtc_reset(void)
-{
- di_init();
-}
diff --git a/drivers/rtc/max6900.c b/drivers/rtc/max6900.c
deleted file mode 100644
index e03a87f94da..00000000000
--- a/drivers/rtc/max6900.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-/*
- * Date & Time support for MAXIM MAX6900 RTC
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <command.h>
-#include <rtc.h>
-#include <i2c.h>
-#include <linux/delay.h>
-
-#ifndef CFG_SYS_I2C_RTC_ADDR
-#define CFG_SYS_I2C_RTC_ADDR 0x50
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-static uchar rtc_read (uchar reg)
-{
- return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg));
-}
-
-static void rtc_write (uchar reg, uchar val)
-{
- i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val);
- udelay(2500);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int rtc_get (struct rtc_time *tmp)
-{
- uchar sec, min, hour, mday, wday, mon, cent, year;
- int retry = 1;
-
- do {
- sec = rtc_read (0x80);
- min = rtc_read (0x82);
- hour = rtc_read (0x84);
- mday = rtc_read (0x86);
- mon = rtc_read (0x88);
- wday = rtc_read (0x8a);
- year = rtc_read (0x8c);
- cent = rtc_read (0x92);
- /*
- * Check for seconds rollover
- */
- if ((sec != 59) || (rtc_read(0x80) == sec)){
- retry = 0;
- }
- } while (retry);
-
- debug ( "Get RTC year: %02x mon: %02x cent: %02x mday: %02x wday: %02x "
- "hr: %02x min: %02x sec: %02x\n",
- year, mon, cent, mday, wday,
- hour, min, sec );
-
- tmp->tm_sec = bcd2bin (sec & 0x7F);
- tmp->tm_min = bcd2bin (min & 0x7F);
- tmp->tm_hour = bcd2bin (hour & 0x3F);
- tmp->tm_mday = bcd2bin (mday & 0x3F);
- tmp->tm_mon = bcd2bin (mon & 0x1F);
- tmp->tm_year = bcd2bin (year) + bcd2bin(cent) * 100;
- tmp->tm_wday = bcd2bin (wday & 0x07);
- tmp->tm_yday = 0;
- tmp->tm_isdst= 0;
-
- debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
- return 0;
-}
-
-int rtc_set (struct rtc_time *tmp)
-{
-
- debug ( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
- rtc_write (0x9E, 0x00);
- rtc_write (0x80, 0); /* Clear seconds to ensure no rollover */
- rtc_write (0x92, bin2bcd(tmp->tm_year / 100));
- rtc_write (0x8c, bin2bcd(tmp->tm_year % 100));
- rtc_write (0x8a, bin2bcd(tmp->tm_wday));
- rtc_write (0x88, bin2bcd(tmp->tm_mon));
- rtc_write (0x86, bin2bcd(tmp->tm_mday));
- rtc_write (0x84, bin2bcd(tmp->tm_hour));
- rtc_write (0x82, bin2bcd(tmp->tm_min ));
- rtc_write (0x80, bin2bcd(tmp->tm_sec ));
-
- return 0;
-}
-
-void rtc_reset (void)
-{
-}
diff --git a/drivers/rtc/mk48t59.c b/drivers/rtc/mk48t59.c
deleted file mode 100644
index 8c90a704076..00000000000
--- a/drivers/rtc/mk48t59.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- */
-
-/*
- * Date & Time support for the MK48T59 RTC
- */
-
-#undef RTC_DEBUG
-
-#include <common.h>
-#include <command.h>
-#include <config.h>
-#include <rtc.h>
-#include <mk48t59.h>
-
-#if defined(CONFIG_BAB7xx)
-
-static uchar rtc_read (short reg)
-{
- out8(RTC_PORT_ADDR0, reg & 0xFF);
- out8(RTC_PORT_ADDR1, (reg>>8) & 0xFF);
- return in8(RTC_PORT_DATA);
-}
-
-static void rtc_write (short reg, uchar val)
-{
- out8(RTC_PORT_ADDR0, reg & 0xFF);
- out8(RTC_PORT_ADDR1, (reg>>8) & 0xFF);
- out8(RTC_PORT_DATA, val);
-}
-
-#elif defined(CONFIG_EVAL5200)
-
-static uchar rtc_read (short reg)
-{
- return in8(RTC(reg));
-}
-
-static void rtc_write (short reg, uchar val)
-{
- out8(RTC(reg),val);
-}
-
-#else
-# error Board specific rtc access functions should be supplied
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-void *nvram_read(void *dest, const short src, size_t count)
-{
- uchar *d = (uchar *) dest;
- short s = src;
-
- while (count--)
- *d++ = rtc_read(s++);
-
- return dest;
-}
-
-void nvram_write(short dest, const void *src, size_t count)
-{
- short d = dest;
- uchar *s = (uchar *) src;
-
- while (count--)
- rtc_write(d++, *s++);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int rtc_get (struct rtc_time *tmp)
-{
- uchar save_ctrl_a;
- uchar sec, min, hour, mday, wday, mon, year;
-
- /* Simple: freeze the clock, read it and allow updates again */
- save_ctrl_a = rtc_read(RTC_CONTROLA);
-
- /* Set the register to read the value. */
- save_ctrl_a |= RTC_CA_READ;
- rtc_write(RTC_CONTROLA, save_ctrl_a);
-
- sec = rtc_read (RTC_SECONDS);
- min = rtc_read (RTC_MINUTES);
- hour = rtc_read (RTC_HOURS);
- mday = rtc_read (RTC_DAY_OF_MONTH);
- wday = rtc_read (RTC_DAY_OF_WEEK);
- mon = rtc_read (RTC_MONTH);
- year = rtc_read (RTC_YEAR);
-
- /* re-enable update */
- save_ctrl_a &= ~RTC_CA_READ;
- rtc_write(RTC_CONTROLA, save_ctrl_a);
-
-#ifdef RTC_DEBUG
- printf ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
- "hr: %02x min: %02x sec: %02x\n",
- year, mon, mday, wday,
- hour, min, sec );
-#endif
- tmp->tm_sec = bcd2bin (sec & 0x7F);
- tmp->tm_min = bcd2bin (min & 0x7F);
- tmp->tm_hour = bcd2bin (hour & 0x3F);
- tmp->tm_mday = bcd2bin (mday & 0x3F);
- tmp->tm_mon = bcd2bin (mon & 0x1F);
- tmp->tm_year = bcd2bin (year);
- tmp->tm_wday = bcd2bin (wday & 0x07);
- if(tmp->tm_year<70)
- tmp->tm_year+=2000;
- else
- tmp->tm_year+=1900;
- tmp->tm_yday = 0;
- tmp->tm_isdst= 0;
-#ifdef RTC_DEBUG
- printf ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-#endif
-
- return 0;
-}
-
-int rtc_set (struct rtc_time *tmp)
-{
- uchar save_ctrl_a;
-
-#ifdef RTC_DEBUG
- printf ( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-#endif
- save_ctrl_a = rtc_read(RTC_CONTROLA);
-
- save_ctrl_a |= RTC_CA_WRITE;
- rtc_write(RTC_CONTROLA, save_ctrl_a); /* disables the RTC to update the regs */
-
- rtc_write (RTC_YEAR, bin2bcd(tmp->tm_year % 100));
- rtc_write (RTC_MONTH, bin2bcd(tmp->tm_mon));
-
- rtc_write (RTC_DAY_OF_WEEK, bin2bcd(tmp->tm_wday));
- rtc_write (RTC_DAY_OF_MONTH, bin2bcd(tmp->tm_mday));
- rtc_write (RTC_HOURS, bin2bcd(tmp->tm_hour));
- rtc_write (RTC_MINUTES, bin2bcd(tmp->tm_min ));
- rtc_write (RTC_SECONDS, bin2bcd(tmp->tm_sec ));
-
- save_ctrl_a &= ~RTC_CA_WRITE;
- rtc_write(RTC_CONTROLA, save_ctrl_a); /* enables the RTC to update the regs */
-
- return 0;
-}
-
-void rtc_reset (void)
-{
- uchar control_b;
-
- /*
- * Start oscillator here.
- */
- control_b = rtc_read(RTC_CONTROLB);
-
- control_b &= ~RTC_CB_STOP;
- rtc_write(RTC_CONTROLB, control_b);
-}
-
-void rtc_set_watchdog(short multi, short res)
-{
- uchar wd_value;
-
- wd_value = RTC_WDS | ((multi & 0x1F) << 2) | (res & 0x3);
- rtc_write(RTC_WATCHDOG, wd_value);
-}
diff --git a/drivers/rtc/mx27rtc.c b/drivers/rtc/mx27rtc.c
deleted file mode 100644
index 563e8a4a361..00000000000
--- a/drivers/rtc/mx27rtc.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale i.MX27 RTC Driver
- *
- * Copyright (C) 2012 Philippe Reynes <tremyfr@yahoo.fr>
- */
-
-#include <common.h>
-#include <rtc.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-
-#define HOUR_SHIFT 8
-#define HOUR_MASK 0x1f
-#define MIN_SHIFT 0
-#define MIN_MASK 0x3f
-
-int rtc_get(struct rtc_time *time)
-{
- struct rtc_regs *rtc_regs = (struct rtc_regs *)IMX_RTC_BASE;
- uint32_t day, hour, min, sec;
-
- day = readl(&rtc_regs->dayr);
- hour = readl(&rtc_regs->hourmin);
- sec = readl(&rtc_regs->seconds);
-
- min = (hour >> MIN_SHIFT) & MIN_MASK;
- hour = (hour >> HOUR_SHIFT) & HOUR_MASK;
-
- sec += min * 60 + hour * 3600 + day * 24 * 3600;
-
- rtc_to_tm(sec, time);
-
- return 0;
-}
-
-int rtc_set(struct rtc_time *time)
-{
- struct rtc_regs *rtc_regs = (struct rtc_regs *)IMX_RTC_BASE;
- uint32_t day, hour, min, sec;
-
- sec = rtc_mktime(time);
-
- day = sec / (24 * 3600);
- sec = sec % (24 * 3600);
- hour = sec / 3600;
- sec = sec % 3600;
- min = sec / 60;
- sec = sec % 60;
-
- hour = (hour & HOUR_MASK) << HOUR_SHIFT;
- hour |= (min & MIN_MASK) << MIN_SHIFT;
-
- writel(day, &rtc_regs->dayr);
- writel(hour, &rtc_regs->hourmin);
- writel(sec, &rtc_regs->seconds);
-
- return 0;
-}
-
-void rtc_reset(void)
-{
- /* nothing to do */
-}
diff --git a/drivers/rtc/rs5c372.c b/drivers/rtc/rs5c372.c
deleted file mode 100644
index 6b1c23ca5db..00000000000
--- a/drivers/rtc/rs5c372.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * rs5c372.c
- *
- * Device driver for Ricoh's Real Time Controller RS5C372A.
- *
- * Copyright (C) 2004 Gary Jennejohn garyj@denx.de
- *
- * Based in part in ds1307.c -
- * (C) Copyright 2001, 2002, 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Keith Outwater, keith_outwater@mvis.com`
- * Steven Scholz, steven.scholz@imc-berlin.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <command.h>
-#include <rtc.h>
-#include <i2c.h>
-
-/*
- * Reads are always done starting with register 15, which requires some
- * jumping-through-hoops to access the data correctly.
- *
- * Writes are always done starting with register 0.
- */
-
-#define DEBUG 0
-
-#if DEBUG
-static unsigned int rtc_debug = DEBUG;
-#else
-#define rtc_debug 0 /* gcc will remove all the debug code for us */
-#endif
-
-#ifndef CFG_SYS_I2C_RTC_ADDR
-#define CFG_SYS_I2C_RTC_ADDR 0x32
-#endif
-
-#define RS5C372_RAM_SIZE 0x10
-#define RATE_32000HZ 0x80 /* Rate Select 32.000KHz */
-#define RATE_32768HZ 0x00 /* Rate Select 32.768KHz */
-
-#define STATUS_XPT 0x10 /* data invalid because voltage was 0 */
-
-#define USE_24HOUR_MODE 0x20
-#define TWELVE_HOUR_MODE(n) ((((n) >> 5) & 1) == 0)
-#define HOURS_AP(n) (((n) >> 5) & 1)
-#define HOURS_12(n) bcd2bin((n) & 0x1F)
-#define HOURS_24(n) bcd2bin((n) & 0x3F)
-
-
-static int setup_done = 0;
-
-static int
-rs5c372_readram(unsigned char *buf, int len)
-{
- int ret;
-
- ret = i2c_read(CFG_SYS_I2C_RTC_ADDR, 0, 0, buf, len);
- if (ret != 0) {
- printf("%s: failed to read\n", __FUNCTION__);
- return ret;
- }
-
- if (buf[0] & STATUS_XPT)
- printf("### Warning: RTC lost power\n");
-
- return ret;
-}
-
-static void
-rs5c372_enable(void)
-{
- unsigned char buf[RS5C372_RAM_SIZE + 1];
- int ret;
-
- /* note that this returns reg. 15 in buf[1] */
- ret = rs5c372_readram(&buf[1], RS5C372_RAM_SIZE);
- if (ret != 0) {
- printf("%s: failed\n", __FUNCTION__);
- return;
- }
-
- buf[0] = 0;
- /* we want to start writing at register 0 so we have to copy the */
- /* register contents up one slot */
- for (ret = 2; ret < 9; ret++)
- buf[ret - 1] = buf[ret];
- /* registers 0 to 6 (time values) are not touched */
- buf[8] = RATE_32768HZ; /* reg. 7 */
- buf[9] = 0; /* reg. 8 */
- buf[10] = 0; /* reg. 9 */
- buf[11] = 0; /* reg. 10 */
- buf[12] = 0; /* reg. 11 */
- buf[13] = 0; /* reg. 12 */
- buf[14] = 0; /* reg. 13 */
- buf[15] = 0; /* reg. 14 */
- buf[16] = USE_24HOUR_MODE; /* reg. 15 */
- ret = i2c_write(CFG_SYS_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1);
- if (ret != 0) {
- printf("%s: failed\n", __FUNCTION__);
- return;
- }
- setup_done = 1;
-
- return;
-}
-
-static void
-rs5c372_convert_to_time(struct rtc_time *dt, unsigned char *buf)
-{
- /* buf[0] is register 15 */
- dt->tm_sec = bcd2bin(buf[1]);
- dt->tm_min = bcd2bin(buf[2]);
-
- if (TWELVE_HOUR_MODE(buf[0])) {
- dt->tm_hour = HOURS_12(buf[3]);
- if (HOURS_AP(buf[3])) /* PM */
- dt->tm_hour += 12;
- } else /* 24-hour-mode */
- dt->tm_hour = HOURS_24(buf[3]);
-
- dt->tm_mday = bcd2bin(buf[5]);
- dt->tm_mon = bcd2bin(buf[6]);
- dt->tm_year = bcd2bin(buf[7]);
- if (dt->tm_year >= 70)
- dt->tm_year += 1900;
- else
- dt->tm_year += 2000;
- /* 0 is Sunday */
- dt->tm_wday = bcd2bin(buf[4] & 0x07);
- dt->tm_yday = 0;
- dt->tm_isdst= 0;
-
- if(rtc_debug > 2) {
- printf("rs5c372_convert_to_time: year = %d\n", dt->tm_year);
- printf("rs5c372_convert_to_time: mon = %d\n", dt->tm_mon);
- printf("rs5c372_convert_to_time: mday = %d\n", dt->tm_mday);
- printf("rs5c372_convert_to_time: hour = %d\n", dt->tm_hour);
- printf("rs5c372_convert_to_time: min = %d\n", dt->tm_min);
- printf("rs5c372_convert_to_time: sec = %d\n", dt->tm_sec);
- }
-}
-
-/*
- * Get the current time from the RTC
- */
-int
-rtc_get (struct rtc_time *tmp)
-{
- unsigned char buf[RS5C372_RAM_SIZE];
- int ret;
-
- if (!setup_done)
- rs5c372_enable();
-
- if (!setup_done)
- return -1;
-
- memset(buf, 0, sizeof(buf));
-
- /* note that this returns reg. 15 in buf[0] */
- ret = rs5c372_readram(buf, RS5C372_RAM_SIZE);
- if (ret != 0) {
- printf("%s: failed\n", __FUNCTION__);
- return -1;
- }
-
- rs5c372_convert_to_time(tmp, buf);
-
- return 0;
-}
-
-/*
- * Set the RTC
- */
-int rtc_set (struct rtc_time *tmp)
-{
- unsigned char buf[8], reg15;
- int ret;
-
- if (!setup_done)
- rs5c372_enable();
-
- if (!setup_done)
- return -1;
-
- if(rtc_debug > 2) {
- printf("rtc_set: tm_year = %d\n", tmp->tm_year);
- printf("rtc_set: tm_mon = %d\n", tmp->tm_mon);
- printf("rtc_set: tm_mday = %d\n", tmp->tm_mday);
- printf("rtc_set: tm_hour = %d\n", tmp->tm_hour);
- printf("rtc_set: tm_min = %d\n", tmp->tm_min);
- printf("rtc_set: tm_sec = %d\n", tmp->tm_sec);
- }
-
- memset(buf, 0, sizeof(buf));
-
- /* only read register 15 */
- ret = i2c_read(CFG_SYS_I2C_RTC_ADDR, 0, 0, buf, 1);
-
- if (ret == 0) {
- /* need to save register 15 */
- reg15 = buf[0];
- buf[0] = 0; /* register address on RS5C372 */
- buf[1] = bin2bcd(tmp->tm_sec);
- buf[2] = bin2bcd(tmp->tm_min);
- /* need to handle 12 hour mode */
- if (TWELVE_HOUR_MODE(reg15)) {
- if (tmp->tm_hour >= 12) { /* PM */
- /* 12 PM is a special case */
- if (tmp->tm_hour == 12)
- buf[3] = bin2bcd(tmp->tm_hour);
- else
- buf[3] = bin2bcd(tmp->tm_hour - 12);
- buf[3] |= 0x20;
- }
- } else {
- buf[3] = bin2bcd(tmp->tm_hour);
- }
-
- buf[4] = bin2bcd(tmp->tm_wday);
- buf[5] = bin2bcd(tmp->tm_mday);
- buf[6] = bin2bcd(tmp->tm_mon);
- if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
- printf("WARNING: year should be between 1970 and 2069!\n");
- buf[7] = bin2bcd(tmp->tm_year % 100);
-
- ret = i2c_write(CFG_SYS_I2C_RTC_ADDR, 0, 0, buf, 8);
- if (ret != 0) {
- printf("rs5c372_set_datetime(), i2c_master_send() returned %d\n",ret);
- return -1;
- }
- } else {
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Reset the RTC.
- */
-void
-rtc_reset (void)
-{
- if (!setup_done)
- rs5c372_enable();
-}
diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c
deleted file mode 100644
index 96ea3cf878e..00000000000
--- a/drivers/rtc/s3c24x0_rtc.c
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2003
- * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
- */
-
-/*
- * Date & Time support for the built-in Samsung S3C24X0 RTC
- */
-
-#include <common.h>
-#include <command.h>
-
-#include <asm/arch/s3c24x0_cpu.h>
-
-#include <rtc.h>
-#include <asm/io.h>
-#include <linux/compiler.h>
-
-typedef enum {
- RTC_ENABLE,
- RTC_DISABLE
-} RTC_ACCESS;
-
-
-static inline void SetRTC_Access(RTC_ACCESS a)
-{
- struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
-
- switch (a) {
- case RTC_ENABLE:
- writeb(readb(&rtc->rtccon) | 0x01, &rtc->rtccon);
- break;
-
- case RTC_DISABLE:
- writeb(readb(&rtc->rtccon) & ~0x01, &rtc->rtccon);
- break;
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-int rtc_get(struct rtc_time *tmp)
-{
- struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
- uchar sec, min, hour, mday, wday, mon, year;
- __maybe_unused uchar a_sec, a_min, a_hour, a_date,
- a_mon, a_year, a_armed;
-
- /* enable access to RTC registers */
- SetRTC_Access(RTC_ENABLE);
-
- /* read RTC registers */
- do {
- sec = readb(&rtc->bcdsec);
- min = readb(&rtc->bcdmin);
- hour = readb(&rtc->bcdhour);
- mday = readb(&rtc->bcddate);
- wday = readb(&rtc->bcdday);
- mon = readb(&rtc->bcdmon);
- year = readb(&rtc->bcdyear);
- } while (sec != readb(&rtc->bcdsec));
-
- /* read ALARM registers */
- a_sec = readb(&rtc->almsec);
- a_min = readb(&rtc->almmin);
- a_hour = readb(&rtc->almhour);
- a_date = readb(&rtc->almdate);
- a_mon = readb(&rtc->almmon);
- a_year = readb(&rtc->almyear);
- a_armed = readb(&rtc->rtcalm);
-
- /* disable access to RTC registers */
- SetRTC_Access(RTC_DISABLE);
-
-#ifdef RTC_DEBUG
- printf("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
- "hr: %02x min: %02x sec: %02x\n",
- year, mon, mday, wday, hour, min, sec);
- printf("Alarms: %02x: year: %02x month: %02x date: %02x hour: "
- "%02x min: %02x sec: %02x\n",
- a_armed, a_year, a_mon, a_date, a_hour, a_min, a_sec);
-#endif
-
- tmp->tm_sec = bcd2bin(sec & 0x7F);
- tmp->tm_min = bcd2bin(min & 0x7F);
- tmp->tm_hour = bcd2bin(hour & 0x3F);
- tmp->tm_mday = bcd2bin(mday & 0x3F);
- tmp->tm_mon = bcd2bin(mon & 0x1F);
- tmp->tm_year = bcd2bin(year);
- tmp->tm_wday = bcd2bin(wday & 0x07);
- if (tmp->tm_year < 70)
- tmp->tm_year += 2000;
- else
- tmp->tm_year += 1900;
- tmp->tm_yday = 0;
- tmp->tm_isdst = 0;
-#ifdef RTC_DEBUG
- printf("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-#endif
-
- return 0;
-}
-
-int rtc_set(struct rtc_time *tmp)
-{
- struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
- uchar sec, min, hour, mday, wday, mon, year;
-
-#ifdef RTC_DEBUG
- printf("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-#endif
- year = bin2bcd(tmp->tm_year % 100);
- mon = bin2bcd(tmp->tm_mon);
- wday = bin2bcd(tmp->tm_wday);
- mday = bin2bcd(tmp->tm_mday);
- hour = bin2bcd(tmp->tm_hour);
- min = bin2bcd(tmp->tm_min);
- sec = bin2bcd(tmp->tm_sec);
-
- /* enable access to RTC registers */
- SetRTC_Access(RTC_ENABLE);
-
- /* write RTC registers */
- writeb(sec, &rtc->bcdsec);
- writeb(min, &rtc->bcdmin);
- writeb(hour, &rtc->bcdhour);
- writeb(mday, &rtc->bcddate);
- writeb(wday, &rtc->bcdday);
- writeb(mon, &rtc->bcdmon);
- writeb(year, &rtc->bcdyear);
-
- /* disable access to RTC registers */
- SetRTC_Access(RTC_DISABLE);
-
- return 0;
-}
-
-void rtc_reset(void)
-{
- struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
-
- writeb((readb(&rtc->rtccon) & ~0x06) | 0x08, &rtc->rtccon);
- writeb(readb(&rtc->rtccon) & ~(0x08 | 0x01), &rtc->rtccon);
-}
diff --git a/drivers/rtc/x1205.c b/drivers/rtc/x1205.c
deleted file mode 100644
index 4a8d1c5903f..00000000000
--- a/drivers/rtc/x1205.c
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * based on a the Linux rtc-x1207.c driver which is:
- * Copyright 2004 Karen Spearel
- * Copyright 2005 Alessandro Zummo
- *
- * Information and datasheet:
- * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
- */
-
-/*
- * Date & Time support for Xicor/Intersil X1205 RTC
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <command.h>
-#include <log.h>
-#include <rtc.h>
-#include <i2c.h>
-
-#define CCR_SEC 0
-#define CCR_MIN 1
-#define CCR_HOUR 2
-#define CCR_MDAY 3
-#define CCR_MONTH 4
-#define CCR_YEAR 5
-#define CCR_WDAY 6
-#define CCR_Y2K 7
-
-#define X1205_REG_SR 0x3F /* status register */
-#define X1205_REG_Y2K 0x37
-#define X1205_REG_DW 0x36
-#define X1205_REG_YR 0x35
-#define X1205_REG_MO 0x34
-#define X1205_REG_DT 0x33
-#define X1205_REG_HR 0x32
-#define X1205_REG_MN 0x31
-#define X1205_REG_SC 0x30
-#define X1205_REG_DTR 0x13
-#define X1205_REG_ATR 0x12
-#define X1205_REG_INT 0x11
-#define X1205_REG_0 0x10
-#define X1205_REG_Y2K1 0x0F
-#define X1205_REG_DWA1 0x0E
-#define X1205_REG_YRA1 0x0D
-#define X1205_REG_MOA1 0x0C
-#define X1205_REG_DTA1 0x0B
-#define X1205_REG_HRA1 0x0A
-#define X1205_REG_MNA1 0x09
-#define X1205_REG_SCA1 0x08
-#define X1205_REG_Y2K0 0x07
-#define X1205_REG_DWA0 0x06
-#define X1205_REG_YRA0 0x05
-#define X1205_REG_MOA0 0x04
-#define X1205_REG_DTA0 0x03
-#define X1205_REG_HRA0 0x02
-#define X1205_REG_MNA0 0x01
-#define X1205_REG_SCA0 0x00
-
-#define X1205_CCR_BASE 0x30 /* Base address of CCR */
-#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
-
-#define X1205_SR_RTCF 0x01 /* Clock failure */
-#define X1205_SR_WEL 0x02 /* Write Enable Latch */
-#define X1205_SR_RWEL 0x04 /* Register Write Enable */
-
-#define X1205_DTR_DTR0 0x01
-#define X1205_DTR_DTR1 0x02
-#define X1205_DTR_DTR2 0x04
-
-#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
-
-static void rtc_write(int reg, u8 val)
-{
- i2c_write(CFG_SYS_I2C_RTC_ADDR, reg, 2, &val, 1);
-}
-
-/*
- * In the routines that deal directly with the x1205 hardware, we use
- * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
- * Epoch is initialized as 2000. Time is set to UTC.
- */
-int rtc_get(struct rtc_time *tm)
-{
- u8 buf[8];
-
- i2c_read(CFG_SYS_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
-
- debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
- "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
- __FUNCTION__,
- buf[0], buf[1], buf[2], buf[3],
- buf[4], buf[5], buf[6], buf[7]);
-
- tm->tm_sec = bcd2bin(buf[CCR_SEC]);
- tm->tm_min = bcd2bin(buf[CCR_MIN]);
- tm->tm_hour = bcd2bin(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
- tm->tm_mday = bcd2bin(buf[CCR_MDAY]);
- tm->tm_mon = bcd2bin(buf[CCR_MONTH]); /* mon is 0-11 */
- tm->tm_year = bcd2bin(buf[CCR_YEAR])
- + (bcd2bin(buf[CCR_Y2K]) * 100);
- tm->tm_wday = buf[CCR_WDAY];
-
- debug("%s: tm is secs=%d, mins=%d, hours=%d, "
- "mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__,
- tm->tm_sec, tm->tm_min, tm->tm_hour,
- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-
- return 0;
-}
-
-int rtc_set(struct rtc_time *tm)
-{
- int i;
- u8 buf[8];
-
- debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
-
- buf[CCR_SEC] = bin2bcd(tm->tm_sec);
- buf[CCR_MIN] = bin2bcd(tm->tm_min);
-
- /* set hour and 24hr bit */
- buf[CCR_HOUR] = bin2bcd(tm->tm_hour) | X1205_HR_MIL;
-
- buf[CCR_MDAY] = bin2bcd(tm->tm_mday);
-
- /* month, 1 - 12 */
- buf[CCR_MONTH] = bin2bcd(tm->tm_mon);
-
- /* year, since the rtc epoch*/
- buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100);
- buf[CCR_WDAY] = tm->tm_wday & 0x07;
- buf[CCR_Y2K] = bin2bcd(tm->tm_year / 100);
-
- /* this sequence is required to unlock the chip */
- rtc_write(X1205_REG_SR, X1205_SR_WEL);
- rtc_write(X1205_REG_SR, X1205_SR_WEL | X1205_SR_RWEL);
-
- /* write register's data */
- for (i = 0; i < 8; i++)
- rtc_write(X1205_CCR_BASE + i, buf[i]);
-
- rtc_write(X1205_REG_SR, 0);
-
- return 0;
-}
-
-void rtc_reset(void)
-{
- /*
- * Nothing to do
- */
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 62/87] mtd: Drop unused CONFIG_S32V234
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (60 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 61/87] rtc: Drop old and unused drivers Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 63/87] mtd: Drop unused scf0403_lcd driver Simon Glass
` (25 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This option does not exist, so the Makefile rule does nothing. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/cpu/armv8/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
index 2e4bf9e038c..bba4f570dbb 100644
--- a/arch/arm/cpu/armv8/Makefile
+++ b/arch/arm/cpu/armv8/Makefile
@@ -39,7 +39,6 @@ obj-$(CONFIG_SPL_RECOVER_DATA_SECTION) += spl_data.o
endif
obj-$(CONFIG_FSL_LAYERSCAPE) += fsl-layerscape/
-obj-$(CONFIG_S32V234) += s32v234/
obj-$(CONFIG_TARGET_HIKEY) += hisilicon/
obj-$(CONFIG_ARMV8_PSCI) += psci.o
obj-$(CONFIG_TARGET_BCMNS3) += bcmns3/
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 63/87] mtd: Drop unused scf0403_lcd driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (61 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 62/87] mtd: Drop unused CONFIG_S32V234 Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 64/87] rmobile: Drop CONFIG_SH73A0 and associated code Simon Glass
` (24 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used since this commit:
76386d6195a arm: Remove cm_t35 board
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/video/Makefile | 1 -
drivers/video/scf0403_lcd.c | 297 ------------------------------------
include/scf0403_lcd.h | 10 --
3 files changed, 308 deletions(-)
delete mode 100644 drivers/video/scf0403_lcd.c
delete mode 100644 include/scf0403_lcd.h
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 12b68cdd068..ce2d61d56bc 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_LOGICORE_DP_TX) += logicore_dp_tx.o
obj-$(CONFIG_NXP_TDA19988) += tda19988.o
obj-$(CONFIG_OSD) += video_osd-uclass.o
obj-$(CONFIG_SANDBOX_OSD) += sandbox_osd.o
-obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
obj-$(CONFIG_VIDEO_ARM_MALIDP) += mali_dp.o
obj-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
obj-$(CONFIG_VIDEO_BROADWELL_IGD) += broadwell_igd.o
diff --git a/drivers/video/scf0403_lcd.c b/drivers/video/scf0403_lcd.c
deleted file mode 100644
index 54f0f88b4c9..00000000000
--- a/drivers/video/scf0403_lcd.c
+++ /dev/null
@@ -1,297 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * scf0403.c -- support for DataImage SCF0403 LCD
- *
- * Copyright (c) 2013 Adapted from Linux driver:
- * Copyright (c) 2012 Anders Electronics plc. All Rights Reserved.
- * Copyright (c) 2012 CompuLab, Ltd
- * Dmitry Lifshitz <lifshitz@compulab.co.il>
- * Ilya Ledvich <ilya@compulab.co.il>
- * Inspired by Alberto Panizzo <maramaopercheseimorto@gmail.com> &
- * Marek Vasut work in l4f00242t03.c
- *
- * U-Boot port: Nikita Kiryanov <nikita@compulab.co.il>
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/gpio.h>
-#include <spi.h>
-#include <linux/delay.h>
-
-struct scf0403_cmd {
- u16 cmd;
- u16 *params;
- int count;
-};
-
-struct scf0403_initseq_entry {
- struct scf0403_cmd cmd;
- int delay_ms;
-};
-
-struct scf0403_priv {
- struct spi_slave *spi;
- unsigned int reset_gpio;
- u32 rddid;
- struct scf0403_initseq_entry *init_seq;
- int seq_size;
-};
-
-struct scf0403_priv priv;
-
-#define SCF0403852GGU04_ID 0x000080
-
-/* SCF0403526GGU20 model commands parameters */
-static u16 extcmd_params_sn20[] = {0xff, 0x98, 0x06};
-static u16 spiinttype_params_sn20[] = {0x60};
-static u16 bc_params_sn20[] = {
- 0x01, 0x10, 0x61, 0x74, 0x01, 0x01, 0x1B,
- 0x12, 0x71, 0x00, 0x00, 0x00, 0x01, 0x01,
- 0x05, 0x00, 0xFF, 0xF2, 0x01, 0x00, 0x40,
-};
-static u16 bd_params_sn20[] = {0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67};
-static u16 be_params_sn20[] = {
- 0x01, 0x22, 0x22, 0xBA, 0xDC, 0x26, 0x28, 0x22, 0x22,
-};
-static u16 vcom_params_sn20[] = {0x74};
-static u16 vmesur_params_sn20[] = {0x7F, 0x0F, 0x00};
-static u16 powerctl_params_sn20[] = {0x03, 0x0b, 0x00};
-static u16 lvglvolt_params_sn20[] = {0x08};
-static u16 engsetting_params_sn20[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x20};
-static u16 dispfunc_params_sn20[] = {0xa0};
-static u16 dvddvolt_params_sn20[] = {0x74};
-static u16 dispinv_params_sn20[] = {0x00, 0x00, 0x00};
-static u16 panelres_params_sn20[] = {0x82};
-static u16 framerate_params_sn20[] = {0x00, 0x13, 0x13};
-static u16 timing_params_sn20[] = {0x80, 0x05, 0x40, 0x28};
-static u16 powerctl2_params_sn20[] = {0x17, 0x75, 0x79, 0x20};
-static u16 memaccess_params_sn20[] = {0x00};
-static u16 pixfmt_params_sn20[] = {0x66};
-static u16 pgamma_params_sn20[] = {
- 0x00, 0x03, 0x0b, 0x0c, 0x0e, 0x08, 0xc5, 0x04,
- 0x08, 0x0c, 0x13, 0x11, 0x11, 0x14, 0x0c, 0x10,
-};
-static u16 ngamma_params_sn20[] = {
- 0x00, 0x0d, 0x11, 0x0c, 0x0c, 0x04, 0x76, 0x03,
- 0x08, 0x0b, 0x16, 0x10, 0x0d, 0x16, 0x0a, 0x00,
-};
-static u16 tearing_params_sn20[] = {0x00};
-
-/* SCF0403852GGU04 model commands parameters */
-static u16 memaccess_params_sn04[] = {0x08};
-static u16 pixfmt_params_sn04[] = {0x66};
-static u16 modectl_params_sn04[] = {0x01};
-static u16 dispfunc_params_sn04[] = {0x22, 0xe2, 0xFF, 0x04};
-static u16 vcom_params_sn04[] = {0x00, 0x6A};
-static u16 pgamma_params_sn04[] = {
- 0x00, 0x07, 0x0d, 0x10, 0x13, 0x19, 0x0f, 0x0c,
- 0x05, 0x08, 0x06, 0x13, 0x0f, 0x30, 0x20, 0x1f,
-};
-static u16 ngamma_params_sn04[] = {
- 0x1F, 0x20, 0x30, 0x0F, 0x13, 0x06, 0x08, 0x05,
- 0x0C, 0x0F, 0x19, 0x13, 0x10, 0x0D, 0x07, 0x00,
-};
-static u16 dispinv_params_sn04[] = {0x02};
-
-/* Common commands */
-static struct scf0403_cmd scf0403_cmd_slpout = {0x11, NULL, 0};
-static struct scf0403_cmd scf0403_cmd_dison = {0x29, NULL, 0};
-
-/* SCF0403852GGU04 init sequence */
-static struct scf0403_initseq_entry scf0403_initseq_sn04[] = {
- {{0x36, memaccess_params_sn04, ARRAY_SIZE(memaccess_params_sn04)}, 0},
- {{0x3A, pixfmt_params_sn04, ARRAY_SIZE(pixfmt_params_sn04)}, 0},
- {{0xB6, dispfunc_params_sn04, ARRAY_SIZE(dispfunc_params_sn04)}, 0},
- {{0xC5, vcom_params_sn04, ARRAY_SIZE(vcom_params_sn04)}, 0},
- {{0xE0, pgamma_params_sn04, ARRAY_SIZE(pgamma_params_sn04)}, 0},
- {{0xE1, ngamma_params_sn04, ARRAY_SIZE(ngamma_params_sn04)}, 20},
- {{0xB0, modectl_params_sn04, ARRAY_SIZE(modectl_params_sn04)}, 0},
- {{0xB4, dispinv_params_sn04, ARRAY_SIZE(dispinv_params_sn04)}, 100},
-};
-
-/* SCF0403526GGU20 init sequence */
-static struct scf0403_initseq_entry scf0403_initseq_sn20[] = {
- {{0xff, extcmd_params_sn20, ARRAY_SIZE(extcmd_params_sn20)}, 0},
- {{0xba, spiinttype_params_sn20, ARRAY_SIZE(spiinttype_params_sn20)}, 0},
- {{0xbc, bc_params_sn20, ARRAY_SIZE(bc_params_sn20)}, 0},
- {{0xbd, bd_params_sn20, ARRAY_SIZE(bd_params_sn20)}, 0},
- {{0xbe, be_params_sn20, ARRAY_SIZE(be_params_sn20)}, 0},
- {{0xc7, vcom_params_sn20, ARRAY_SIZE(vcom_params_sn20)}, 0},
- {{0xed, vmesur_params_sn20, ARRAY_SIZE(vmesur_params_sn20)}, 0},
- {{0xc0, powerctl_params_sn20, ARRAY_SIZE(powerctl_params_sn20)}, 0},
- {{0xfc, lvglvolt_params_sn20, ARRAY_SIZE(lvglvolt_params_sn20)}, 0},
- {{0xb6, dispfunc_params_sn20, ARRAY_SIZE(dispfunc_params_sn20)}, 0},
- {{0xdf, engsetting_params_sn20, ARRAY_SIZE(engsetting_params_sn20)}, 0},
- {{0xf3, dvddvolt_params_sn20, ARRAY_SIZE(dvddvolt_params_sn20)}, 0},
- {{0xb4, dispinv_params_sn20, ARRAY_SIZE(dispinv_params_sn20)}, 0},
- {{0xf7, panelres_params_sn20, ARRAY_SIZE(panelres_params_sn20)}, 0},
- {{0xb1, framerate_params_sn20, ARRAY_SIZE(framerate_params_sn20)}, 0},
- {{0xf2, timing_params_sn20, ARRAY_SIZE(timing_params_sn20)}, 0},
- {{0xc1, powerctl2_params_sn20, ARRAY_SIZE(powerctl2_params_sn20)}, 0},
- {{0x36, memaccess_params_sn20, ARRAY_SIZE(memaccess_params_sn20)}, 0},
- {{0x3a, pixfmt_params_sn20, ARRAY_SIZE(pixfmt_params_sn20)}, 0},
- {{0xe0, pgamma_params_sn20, ARRAY_SIZE(pgamma_params_sn20)}, 0},
- {{0xe1, ngamma_params_sn20, ARRAY_SIZE(ngamma_params_sn20)}, 0},
- {{0x35, tearing_params_sn20, ARRAY_SIZE(tearing_params_sn20)}, 0},
-};
-
-static void scf0403_gpio_reset(unsigned int gpio)
-{
- if (!gpio_is_valid(gpio))
- return;
-
- gpio_set_value(gpio, 1);
- mdelay(100);
- gpio_set_value(gpio, 0);
- mdelay(40);
- gpio_set_value(gpio, 1);
- mdelay(100);
-}
-
-static int scf0403_spi_read_rddid(struct spi_slave *spi, u32 *rddid)
-{
- int error = 0;
- u8 ids_buf = 0x00;
- u16 dummy_buf = 0x00;
- u16 cmd = 0x04;
-
- error = spi_set_wordlen(spi, 9);
- if (error)
- return error;
-
- /* Here 9 bits required to transmit a command */
- error = spi_xfer(spi, 9, &cmd, NULL, SPI_XFER_ONCE);
- if (error)
- return error;
-
- /*
- * Here 8 + 1 bits required to arrange extra clock cycle
- * before the first data bit.
- * According to the datasheet - first parameter is the dummy data.
- */
- error = spi_xfer(spi, 9, NULL, &dummy_buf, SPI_XFER_ONCE);
- if (error)
- return error;
-
- error = spi_set_wordlen(spi, 8);
- if (error)
- return error;
-
- /* Read rest of the data */
- error = spi_xfer(spi, 8, NULL, &ids_buf, SPI_XFER_ONCE);
- if (error)
- return error;
-
- *rddid = ids_buf;
-
- return 0;
-}
-
-static int scf0403_spi_transfer(struct spi_slave *spi, struct scf0403_cmd *cmd)
-{
- int i, error;
- u32 command = cmd->cmd;
- u32 msg;
-
- error = spi_set_wordlen(spi, 9);
- if (error)
- return error;
-
- error = spi_xfer(spi, 9, &command, NULL, SPI_XFER_ONCE);
- if (error)
- return error;
-
- for (i = 0; i < cmd->count; i++) {
- msg = (cmd->params[i] | 0x100);
- error = spi_xfer(spi, 9, &msg, NULL, SPI_XFER_ONCE);
- if (error)
- return error;
- }
-
- return 0;
-}
-
-static void scf0403_lcd_init(struct scf0403_priv *priv)
-{
- int i;
-
- /* reset LCD */
- scf0403_gpio_reset(priv->reset_gpio);
-
- for (i = 0; i < priv->seq_size; i++) {
- if (scf0403_spi_transfer(priv->spi, &priv->init_seq[i].cmd) < 0)
- puts("SPI transfer failed\n");
-
- mdelay(priv->init_seq[i].delay_ms);
- }
-}
-
-static int scf0403_request_reset_gpio(unsigned gpio)
-{
- int err = gpio_request(gpio, "lcd reset");
-
- if (err)
- return err;
-
- err = gpio_direction_output(gpio, 0);
- if (err)
- gpio_free(gpio);
-
- return err;
-}
-
-int scf0403_init(int reset_gpio)
-{
- int error;
-
- if (gpio_is_valid(reset_gpio)) {
- error = scf0403_request_reset_gpio(reset_gpio);
- if (error) {
- printf("Failed requesting reset GPIO%d: %d\n",
- reset_gpio, error);
- return error;
- }
- }
-
- priv.reset_gpio = reset_gpio;
- priv.spi = spi_setup_slave(3, 0, 1000000, SPI_MODE_0);
- error = spi_claim_bus(priv.spi);
- if (error)
- goto bus_claim_fail;
-
- /* reset LCD */
- scf0403_gpio_reset(reset_gpio);
-
- error = scf0403_spi_read_rddid(priv.spi, &priv.rddid);
- if (error) {
- puts("IDs read failed\n");
- goto readid_fail;
- }
-
- if (priv.rddid == SCF0403852GGU04_ID) {
- priv.init_seq = scf0403_initseq_sn04;
- priv.seq_size = ARRAY_SIZE(scf0403_initseq_sn04);
- } else {
- priv.init_seq = scf0403_initseq_sn20;
- priv.seq_size = ARRAY_SIZE(scf0403_initseq_sn20);
- }
-
- scf0403_lcd_init(&priv);
-
- /* Start operation */
- scf0403_spi_transfer(priv.spi, &scf0403_cmd_dison);
- mdelay(100);
- scf0403_spi_transfer(priv.spi, &scf0403_cmd_slpout);
- spi_release_bus(priv.spi);
-
- return 0;
-
-readid_fail:
- spi_release_bus(priv.spi);
-bus_claim_fail:
- if (gpio_is_valid(priv.reset_gpio))
- gpio_free(priv.reset_gpio);
-
- return error;
-}
diff --git a/include/scf0403_lcd.h b/include/scf0403_lcd.h
deleted file mode 100644
index 07f8c643ba5..00000000000
--- a/include/scf0403_lcd.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2013, Compulab Inc.
- */
-#ifndef SCF0403_LCD_H_
-#define SCF0403_LCD_H_
-
-int scf0403_init(int reset_gpio);
-
-#endif
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 64/87] rmobile: Drop CONFIG_SH73A0 and associated code
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (62 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 63/87] mtd: Drop unused scf0403_lcd driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 65/87] sh4: Drop unused pci_sh7780 driver Simon Glass
` (23 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Nobuhiro Iwamatsu
This option does not exist, so the code attached to it is not used. Drop
it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/mach-rmobile/Makefile | 1 -
arch/arm/mach-rmobile/cpu_info-sh73a0.c | 43 -
arch/arm/mach-rmobile/cpu_info.c | 1 -
arch/arm/mach-rmobile/include/mach/gpio.h | 5 +-
arch/arm/mach-rmobile/include/mach/rmobile.h | 5 +-
.../mach-rmobile/include/mach/sh73a0-gpio.h | 553 ----
arch/arm/mach-rmobile/include/mach/sh73a0.h | 289 --
arch/arm/mach-rmobile/pfc-sh73a0.c | 2807 -----------------
drivers/i2c/sh_i2c.c | 5 -
drivers/serial/serial_sh.h | 10 +-
10 files changed, 4 insertions(+), 3715 deletions(-)
delete mode 100644 arch/arm/mach-rmobile/cpu_info-sh73a0.c
delete mode 100644 arch/arm/mach-rmobile/include/mach/sh73a0-gpio.h
delete mode 100644 arch/arm/mach-rmobile/include/mach/sh73a0.h
delete mode 100644 arch/arm/mach-rmobile/pfc-sh73a0.c
diff --git a/arch/arm/mach-rmobile/Makefile b/arch/arm/mach-rmobile/Makefile
index 3f77760e50d..5b86221bc25 100644
--- a/arch/arm/mach-rmobile/Makefile
+++ b/arch/arm/mach-rmobile/Makefile
@@ -8,7 +8,6 @@ obj-y += emac.o
obj-$(CONFIG_DISPLAY_BOARDINFO) += board.o
obj-$(CONFIG_TMU_TIMER) += ../../sh/lib/time.o
-obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o
obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o
obj-$(CONFIG_RCAR_GEN2) += lowlevel_init_ca15.o cpu_info-rcar.o
obj-$(CONFIG_RCAR_GEN3) += lowlevel_init_gen3.o cpu_info-rcar.o memmap-gen3.o
diff --git a/arch/arm/mach-rmobile/cpu_info-sh73a0.c b/arch/arm/mach-rmobile/cpu_info-sh73a0.c
deleted file mode 100644
index 0c7ee8acf5a..00000000000
--- a/arch/arm/mach-rmobile/cpu_info-sh73a0.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * (C) Copyright 2012 Renesas Solutions Corp.
- */
-#include <common.h>
-#include <asm/io.h>
-
-u32 rmobile_get_cpu_type(void)
-{
- u32 id;
- u32 type;
- struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
-
- id = readl(&hpb->cccr);
- type = (id >> 8) & 0xFF;
-
- return type;
-}
-
-u32 rmobile_get_cpu_rev_integer(void)
-{
- u32 id;
- u32 rev;
- struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
-
- id = readl(&hpb->cccr);
- rev = ((id >> 4) & 0xF) + 1;
-
- return rev;
-}
-
-u32 rmobile_get_cpu_rev_fraction(void)
-{
- u32 id;
- u32 rev;
- struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
-
- id = readl(&hpb->cccr);
- rev = id & 0xF;
-
- return rev;
-}
diff --git a/arch/arm/mach-rmobile/cpu_info.c b/arch/arm/mach-rmobile/cpu_info.c
index bd9e71707f5..246029ac294 100644
--- a/arch/arm/mach-rmobile/cpu_info.c
+++ b/arch/arm/mach-rmobile/cpu_info.c
@@ -62,7 +62,6 @@ static const struct {
u16 cpu_type;
u8 cpu_name[10];
} rmobile_cpuinfo[] = {
- { RMOBILE_CPU_TYPE_SH73A0, "SH73A0" },
{ RMOBILE_CPU_TYPE_R8A7740, "R8A7740" },
{ RMOBILE_CPU_TYPE_R8A7790, "R8A7790" },
{ RMOBILE_CPU_TYPE_R8A7791, "R8A7791" },
diff --git a/arch/arm/mach-rmobile/include/mach/gpio.h b/arch/arm/mach-rmobile/include/mach/gpio.h
index 6b5e4ed4eb5..150aa46034d 100644
--- a/arch/arm/mach-rmobile/include/mach/gpio.h
+++ b/arch/arm/mach-rmobile/include/mach/gpio.h
@@ -1,10 +1,7 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-#if defined(CONFIG_SH73A0)
-#include "sh73a0-gpio.h"
-void sh73a0_pinmux_init(void);
-#elif defined(CONFIG_R8A7740)
+#if defined(CONFIG_R8A7740)
#include "r8a7740-gpio.h"
void r8a7740_pinmux_init(void);
#endif
diff --git a/arch/arm/mach-rmobile/include/mach/rmobile.h b/arch/arm/mach-rmobile/include/mach/rmobile.h
index dc6f87631bc..53f9a80ecfe 100644
--- a/arch/arm/mach-rmobile/include/mach/rmobile.h
+++ b/arch/arm/mach-rmobile/include/mach/rmobile.h
@@ -2,9 +2,7 @@
#define __ASM_ARCH_RMOBILE_H
#if defined(CONFIG_ARCH_RMOBILE)
-#if defined(CONFIG_SH73A0)
-#include <asm/arch/sh73a0.h>
-#elif defined(CONFIG_R8A7740)
+#if defined(CONFIG_R8A7740)
#include <asm/arch/r8a7740.h>
#elif defined(CONFIG_R8A7790)
#include <asm/arch/r8a7790.h>
@@ -25,7 +23,6 @@
#endif /* CONFIG_ARCH_RMOBILE */
/* PRR CPU IDs */
-#define RMOBILE_CPU_TYPE_SH73A0 0x37
#define RMOBILE_CPU_TYPE_R8A7740 0x40
#define RMOBILE_CPU_TYPE_R8A7790 0x45
#define RMOBILE_CPU_TYPE_R8A7791 0x47
diff --git a/arch/arm/mach-rmobile/include/mach/sh73a0-gpio.h b/arch/arm/mach-rmobile/include/mach/sh73a0-gpio.h
deleted file mode 100644
index 398e2c10913..00000000000
--- a/arch/arm/mach-rmobile/include/mach/sh73a0-gpio.h
+++ /dev/null
@@ -1,553 +0,0 @@
-#ifndef __ASM_SH73A0_H__
-#define __ASM_SH73A0_H__
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function and MSEL switch
- * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* Hardware manual Table 25-1 (GPIO) */
- GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
- GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
-
- GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
- GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
-
- GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
- GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
-
- GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
- GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
-
- GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
- GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
-
- GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
- GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
-
- GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
- GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
-
- GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
- GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
-
- GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
- GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
-
- GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
- GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
-
- GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
- GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
-
- GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
- GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
-
- GPIO_PORT128, GPIO_PORT129,
-
- GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
- GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
-
- GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
- GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
-
- GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
- GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
-
- GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
-
- GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
- GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
-
- GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
- GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
-
- GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
- GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
-
- GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
- GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
-
- GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
- GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
-
- GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
- GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
-
- GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
- GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
-
- GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
- GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
-
- GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, GPIO_PORT273, GPIO_PORT274,
- GPIO_PORT275, GPIO_PORT276, GPIO_PORT277, GPIO_PORT278, GPIO_PORT279,
-
- GPIO_PORT280, GPIO_PORT281, GPIO_PORT282,
-
- GPIO_PORT288, GPIO_PORT289,
-
- GPIO_PORT290, GPIO_PORT291, GPIO_PORT292, GPIO_PORT293, GPIO_PORT294,
- GPIO_PORT295, GPIO_PORT296, GPIO_PORT297, GPIO_PORT298, GPIO_PORT299,
-
- GPIO_PORT300, GPIO_PORT301, GPIO_PORT302, GPIO_PORT303, GPIO_PORT304,
- GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309,
-
- /* Table 25-1 (Function 0-7) */
- GPIO_FN_VBUS_0,
- GPIO_FN_GPI0,
- GPIO_FN_GPI1,
- GPIO_FN_GPI2,
- GPIO_FN_GPI3,
- GPIO_FN_GPI4,
- GPIO_FN_GPI5,
- GPIO_FN_GPI6,
- GPIO_FN_GPI7,
- GPIO_FN_SCIFA7_RXD,
- GPIO_FN_SCIFA7_CTS_,
- GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2,
- GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2,
- GPIO_FN_GPO5, GPIO_FN_SCIFA0_SCK, GPIO_FN_FSICOSLDT3, \
- GPIO_FN_PORT16_VIO_CKOR,
- GPIO_FN_SCIFA0_TXD,
- GPIO_FN_SCIFA7_TXD,
- GPIO_FN_SCIFA7_RTS_, GPIO_FN_PORT19_VIO_CKO2,
- GPIO_FN_GPO0,
- GPIO_FN_GPO1,
- GPIO_FN_GPO2, GPIO_FN_STATUS0,
- GPIO_FN_GPO3, GPIO_FN_STATUS1,
- GPIO_FN_GPO4, GPIO_FN_STATUS2,
- GPIO_FN_VINT,
- GPIO_FN_TCKON,
- GPIO_FN_XDVFS1, GPIO_FN_PORT27_I2C_SCL2, GPIO_FN_PORT27_I2C_SCL3, \
- GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT,
- GPIO_FN_XDVFS2, GPIO_FN_PORT28_I2C_SDA2, GPIO_FN_PORT28_I2C_SDA3, \
- GPIO_FN_PORT28_TPU1TO1,
- GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1,
- GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR,
- GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT,
- GPIO_FN_SCIFA4_TXD,
- GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
- GPIO_FN_SCIFA4_RTS_,
- GPIO_FN_SCIFA4_CTS_,
- GPIO_FN_FSIBOBT, GPIO_FN_FSIBIBT,
- GPIO_FN_FSIBOLR, GPIO_FN_FSIBILR,
- GPIO_FN_FSIBOSLD,
- GPIO_FN_FSIBISLD,
- GPIO_FN_VACK,
- GPIO_FN_XTAL1L,
- GPIO_FN_SCIFA0_RTS_, GPIO_FN_FSICOSLDT2,
- GPIO_FN_SCIFA0_RXD,
- GPIO_FN_SCIFA0_CTS_, GPIO_FN_FSICOSLDT1,
- GPIO_FN_FSICOBT, GPIO_FN_FSICIBT, GPIO_FN_FSIDOBT, GPIO_FN_FSIDIBT,
- GPIO_FN_FSICOLR, GPIO_FN_FSICILR, GPIO_FN_FSIDOLR, GPIO_FN_FSIDILR,
- GPIO_FN_FSICOSLD, GPIO_FN_PORT47_FSICSPDIF,
- GPIO_FN_FSICISLD, GPIO_FN_FSIDISLD,
- GPIO_FN_FSIACK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, \
- GPIO_FN_FSIAOMC,
- GPIO_FN_FSIAOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_FSIAILR,
-
- GPIO_FN_FSIAOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_FSIAIBT,
- GPIO_FN_FSIAOSLD, GPIO_FN_BBIF2_TXD2,
- GPIO_FN_FSIASPDIF, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, \
- GPIO_FN_FSIBSPDIF, GPIO_FN_PORT53_FSICSPDIF,
- GPIO_FN_FSIBCK, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, \
- GPIO_FN_FSIBOMC, GPIO_FN_FSICCK, GPIO_FN_FSICOMC,
- GPIO_FN_FSIAISLD, GPIO_FN_TPU0TO0,
- GPIO_FN_A0, GPIO_FN_BS_,
- GPIO_FN_A12, GPIO_FN_PORT58_KEYOUT7, GPIO_FN_TPU4TO2,
- GPIO_FN_A13, GPIO_FN_PORT59_KEYOUT6, GPIO_FN_TPU0TO1,
- GPIO_FN_A14, GPIO_FN_KEYOUT5,
- GPIO_FN_A15, GPIO_FN_KEYOUT4,
- GPIO_FN_A16, GPIO_FN_KEYOUT3, GPIO_FN_MSIOF0_SS1,
- GPIO_FN_A17, GPIO_FN_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
- GPIO_FN_A18, GPIO_FN_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
- GPIO_FN_A19, GPIO_FN_KEYOUT0, GPIO_FN_MSIOF0_TXD,
- GPIO_FN_A20, GPIO_FN_KEYIN0, GPIO_FN_MSIOF0_RSCK,
- GPIO_FN_A21, GPIO_FN_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
- GPIO_FN_A22, GPIO_FN_KEYIN2, GPIO_FN_MSIOF0_MCK0,
- GPIO_FN_A23, GPIO_FN_KEYIN3, GPIO_FN_MSIOF0_MCK1,
- GPIO_FN_A24, GPIO_FN_KEYIN4, GPIO_FN_MSIOF0_RXD,
- GPIO_FN_A25, GPIO_FN_KEYIN5, GPIO_FN_MSIOF0_SS2,
- GPIO_FN_A26, GPIO_FN_KEYIN6,
- GPIO_FN_KEYIN7,
- GPIO_FN_D0_NAF0,
- GPIO_FN_D1_NAF1,
- GPIO_FN_D2_NAF2,
- GPIO_FN_D3_NAF3,
- GPIO_FN_D4_NAF4,
- GPIO_FN_D5_NAF5,
- GPIO_FN_D6_NAF6,
- GPIO_FN_D7_NAF7,
- GPIO_FN_D8_NAF8,
- GPIO_FN_D9_NAF9,
- GPIO_FN_D10_NAF10,
- GPIO_FN_D11_NAF11,
- GPIO_FN_D12_NAF12,
- GPIO_FN_D13_NAF13,
- GPIO_FN_D14_NAF14,
- GPIO_FN_D15_NAF15,
- GPIO_FN_CS4_,
- GPIO_FN_CS5A_, GPIO_FN_PORT91_RDWR,
- GPIO_FN_CS5B_, GPIO_FN_FCE1_,
- GPIO_FN_CS6B_, GPIO_FN_DACK0,
- GPIO_FN_FCE0_, GPIO_FN_CS6A_,
- GPIO_FN_WAIT_, GPIO_FN_DREQ0,
- GPIO_FN_RD__FSC,
- GPIO_FN_WE0__FWE, GPIO_FN_RDWR_FWE,
- GPIO_FN_WE1_,
- GPIO_FN_FRB,
- GPIO_FN_CKO,
- GPIO_FN_NBRSTOUT_,
- GPIO_FN_NBRST_,
- GPIO_FN_BBIF2_TXD,
- GPIO_FN_BBIF2_RXD,
- GPIO_FN_BBIF2_SYNC,
- GPIO_FN_BBIF2_SCK,
- GPIO_FN_SCIFA3_CTS_, GPIO_FN_MFG3_IN2,
- GPIO_FN_SCIFA3_RXD, GPIO_FN_MFG3_IN1,
- GPIO_FN_BBIF1_SS2, GPIO_FN_SCIFA3_RTS_, GPIO_FN_MFG3_OUT1,
- GPIO_FN_SCIFA3_TXD,
- GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD,
- GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK,
- GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC,
- GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD,
- GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK, GPIO_FN_PORT115_I2C_SCL2, \
- GPIO_FN_PORT115_I2C_SCL3,
- GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC, GPIO_FN_PORT116_I2C_SDA2, \
- GPIO_FN_PORT116_I2C_SDA3,
- GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW,
- GPIO_FN_HSI_TX_FLAG,
- GPIO_FN_VIO_VD, GPIO_FN_PORT128_LCD2VSYN, GPIO_FN_VIO2_VD, \
- GPIO_FN_LCD2D0,
-
- GPIO_FN_VIO_HD, GPIO_FN_PORT129_LCD2HSYN, GPIO_FN_PORT129_LCD2CS_, \
- GPIO_FN_VIO2_HD, GPIO_FN_LCD2D1,
- GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD, GPIO_FN_LCD2D10,
- GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT6, GPIO_FN_PORT131_MSIOF2_SS1, \
- GPIO_FN_PORT131_KEYOUT11, GPIO_FN_LCD2D11,
- GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT7, GPIO_FN_PORT132_MSIOF2_SS2, \
- GPIO_FN_PORT132_KEYOUT10, GPIO_FN_LCD2D12,
- GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_LCD2D13,
- GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD, GPIO_FN_LCD2D14,
- GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK, GPIO_FN_LCD2D15,
- GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYOUT8, GPIO_FN_LCD2D16,
- GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYOUT9, GPIO_FN_LCD2D17,
- GPIO_FN_VIO_D8, GPIO_FN_PORT138_KEYOUT8, GPIO_FN_VIO2_D0, \
- GPIO_FN_LCD2D6,
- GPIO_FN_VIO_D9, GPIO_FN_PORT139_KEYOUT9, GPIO_FN_VIO2_D1, \
- GPIO_FN_LCD2D7,
- GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2, GPIO_FN_LCD2D8,
- GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3, GPIO_FN_LCD2D9,
- GPIO_FN_VIO_D12, GPIO_FN_PORT142_KEYOUT10, GPIO_FN_VIO2_D4, \
- GPIO_FN_LCD2D2,
- GPIO_FN_VIO_D13, GPIO_FN_PORT143_KEYOUT11, GPIO_FN_PORT143_KEYOUT6, \
- GPIO_FN_VIO2_D5, GPIO_FN_LCD2D3,
- GPIO_FN_VIO_D14, GPIO_FN_PORT144_KEYOUT7, GPIO_FN_VIO2_D6, \
- GPIO_FN_LCD2D4,
- GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_LCD2DISP, \
- GPIO_FN_PORT145_LCD2RS, GPIO_FN_VIO2_D7, GPIO_FN_LCD2D5,
- GPIO_FN_VIO_CLK, GPIO_FN_LCD2DCK, GPIO_FN_PORT146_LCD2WR_, \
- GPIO_FN_VIO2_CLK, GPIO_FN_LCD2D18,
- GPIO_FN_VIO_FIELD, GPIO_FN_LCD2RD_, GPIO_FN_VIO2_FIELD, GPIO_FN_LCD2D19,
- GPIO_FN_VIO_CKO,
- GPIO_FN_A27, GPIO_FN_PORT149_RDWR, GPIO_FN_MFG0_IN1, \
- GPIO_FN_PORT149_KEYOUT9,
- GPIO_FN_MFG0_IN2,
- GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
- GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
- GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
- GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
- GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
- GPIO_FN_SCIFA2_RTS1_, GPIO_FN_PORT156_MSIOF2_SS2,
- GPIO_FN_SCIFA2_CTS1_, GPIO_FN_PORT157_MSIOF2_RXD,
- GPIO_FN_DINT_, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
- GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
- GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD,
- GPIO_FN_PORT161_SCIFB_CTS_, GPIO_FN_PORT161_SCIFA5_CTS_,
- GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD,
- GPIO_FN_PORT163_SCIFB_RTS_, GPIO_FN_PORT163_SCIFA5_RTS_, \
- GPIO_FN_TPU3TO0,
- GPIO_FN_LCDD0,
- GPIO_FN_LCDD1, GPIO_FN_PORT193_SCIFA5_CTS_, GPIO_FN_BBIF2_TSYNC1,
- GPIO_FN_LCDD2, GPIO_FN_PORT194_SCIFA5_RTS_, GPIO_FN_BBIF2_TSCK1,
- GPIO_FN_LCDD3, GPIO_FN_PORT195_SCIFA5_RXD, GPIO_FN_BBIF2_TXD1,
- GPIO_FN_LCDD4, GPIO_FN_PORT196_SCIFA5_TXD,
- GPIO_FN_LCDD5, GPIO_FN_PORT197_SCIFA5_SCK, GPIO_FN_MFG2_OUT2, \
- GPIO_FN_TPU2TO1,
- GPIO_FN_LCDD6,
- GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2,
- GPIO_FN_LCDD8, GPIO_FN_D16,
- GPIO_FN_LCDD9, GPIO_FN_D17,
- GPIO_FN_LCDD10, GPIO_FN_D18,
- GPIO_FN_LCDD11, GPIO_FN_D19,
- GPIO_FN_LCDD12, GPIO_FN_D20,
- GPIO_FN_LCDD13, GPIO_FN_D21,
- GPIO_FN_LCDD14, GPIO_FN_D22,
- GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23,
- GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24,
- GPIO_FN_LCDD17, GPIO_FN_D25,
- GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
- GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27,
- GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
- GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
- GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
- GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
- GPIO_FN_LCDDCK, GPIO_FN_LCDWR_,
- GPIO_FN_LCDRD_, GPIO_FN_DACK2, GPIO_FN_PORT217_LCD2RS, \
- GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3, GPIO_FN_PORT217_LCD2DISP,
- GPIO_FN_LCDHSYN, GPIO_FN_LCDCS_, GPIO_FN_LCDCS2_, GPIO_FN_DACK3, \
- GPIO_FN_PORT218_VIO_CKOR,
- GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_PORT219_LCD2WR_, \
- GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \
- GPIO_FN_LCD2DCK_2,
- GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2,
- GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PORT221_LCD2CS_, \
- GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \
- GPIO_FN_PORT221_LCD2HSYN,
- GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, \
- GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3, GPIO_FN_PORT222_LCD2VSYN,
-
- GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
- GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_PORT226_VIO_CKO2,
- GPIO_FN_SCIFA1_RTS_, GPIO_FN_IDIN,
- GPIO_FN_SCIFA1_RXD,
- GPIO_FN_SCIFA1_CTS_, GPIO_FN_MFG1_IN1,
- GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2,
- GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2_,
- GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2,
- GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2,
- GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2_, GPIO_FN_VIO2_CLK2, \
- GPIO_FN_LCD2D20,
- GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \
- GPIO_FN_LCD2D21,
- GPIO_FN_MSIOF1_MCK0, GPIO_FN_PORT236_I2C_SDA2,
- GPIO_FN_MSIOF1_MCK1, GPIO_FN_PORT237_I2C_SCL2,
- GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2, GPIO_FN_LCD2D22,
- GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2, GPIO_FN_LCD2D23,
- GPIO_FN_SCIFA6_TXD,
- GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \
- GPIO_FN_TPU4TO0,
- GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
- GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
- GPIO_FN_PORT244_SCIFA5_CTS_, GPIO_FN_MFG2_IN1, \
- GPIO_FN_PORT244_SCIFB_CTS_, GPIO_FN_MSIOF2R_RXD,
- GPIO_FN_PORT245_SCIFA5_RTS_, GPIO_FN_MFG2_IN2, \
- GPIO_FN_PORT245_SCIFB_RTS_, GPIO_FN_MSIOF2R_TXD,
- GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, \
- GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
- GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, \
- GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
- GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, \
- GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, \
- GPIO_FN_PORT248_I2C_SCL3, GPIO_FN_MSIOF2R_TSCK,
- GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \
- GPIO_FN_PORT249_I2C_SDA3, GPIO_FN_MSIOF2R_TSYNC,
- GPIO_FN_SDHICLK0,
- GPIO_FN_SDHICD0,
- GPIO_FN_SDHID0_0,
- GPIO_FN_SDHID0_1,
- GPIO_FN_SDHID0_2,
- GPIO_FN_SDHID0_3,
- GPIO_FN_SDHICMD0,
- GPIO_FN_SDHIWP0,
- GPIO_FN_SDHICLK1,
- GPIO_FN_SDHID1_0, GPIO_FN_TS_SPSYNC2,
- GPIO_FN_SDHID1_1, GPIO_FN_TS_SDAT2,
- GPIO_FN_SDHID1_2, GPIO_FN_TS_SDEN2,
- GPIO_FN_SDHID1_3, GPIO_FN_TS_SCK2,
- GPIO_FN_SDHICMD1,
- GPIO_FN_SDHICLK2,
- GPIO_FN_SDHID2_0, GPIO_FN_TS_SPSYNC4,
- GPIO_FN_SDHID2_1, GPIO_FN_TS_SDAT4,
- GPIO_FN_SDHID2_2, GPIO_FN_TS_SDEN4,
- GPIO_FN_SDHID2_3, GPIO_FN_TS_SCK4,
- GPIO_FN_SDHICMD2,
- GPIO_FN_MMCCLK0,
- GPIO_FN_MMCD0_0,
- GPIO_FN_MMCD0_1,
- GPIO_FN_MMCD0_2,
- GPIO_FN_MMCD0_3,
- GPIO_FN_MMCD0_4, GPIO_FN_TS_SPSYNC5,
- GPIO_FN_MMCD0_5, GPIO_FN_TS_SDAT5,
- GPIO_FN_MMCD0_6, GPIO_FN_TS_SDEN5,
- GPIO_FN_MMCD0_7, GPIO_FN_TS_SCK5,
- GPIO_FN_MMCCMD0,
- GPIO_FN_RESETOUTS_, GPIO_FN_EXTAL2OUT,
- GPIO_FN_MCP_WAIT__MCP_FRB,
- GPIO_FN_MCP_CKO, GPIO_FN_MMCCLK1,
- GPIO_FN_MCP_D15_MCP_NAF15,
- GPIO_FN_MCP_D14_MCP_NAF14,
- GPIO_FN_MCP_D13_MCP_NAF13,
- GPIO_FN_MCP_D12_MCP_NAF12,
- GPIO_FN_MCP_D11_MCP_NAF11,
- GPIO_FN_MCP_D10_MCP_NAF10,
- GPIO_FN_MCP_D9_MCP_NAF9,
- GPIO_FN_MCP_D8_MCP_NAF8, GPIO_FN_MMCCMD1,
- GPIO_FN_MCP_D7_MCP_NAF7, GPIO_FN_MMCD1_7,
-
- GPIO_FN_MCP_D6_MCP_NAF6, GPIO_FN_MMCD1_6,
- GPIO_FN_MCP_D5_MCP_NAF5, GPIO_FN_MMCD1_5,
- GPIO_FN_MCP_D4_MCP_NAF4, GPIO_FN_MMCD1_4,
- GPIO_FN_MCP_D3_MCP_NAF3, GPIO_FN_MMCD1_3,
- GPIO_FN_MCP_D2_MCP_NAF2, GPIO_FN_MMCD1_2,
- GPIO_FN_MCP_D1_MCP_NAF1, GPIO_FN_MMCD1_1,
- GPIO_FN_MCP_D0_MCP_NAF0, GPIO_FN_MMCD1_0,
- GPIO_FN_MCP_NBRSTOUT_,
- GPIO_FN_MCP_WE0__MCP_FWE, GPIO_FN_MCP_RDWR_MCP_FWE,
-
- /* MSEL2 special case */
- GPIO_FN_TSIF2_TS_XX1,
- GPIO_FN_TSIF2_TS_XX2,
- GPIO_FN_TSIF2_TS_XX3,
- GPIO_FN_TSIF2_TS_XX4,
- GPIO_FN_TSIF2_TS_XX5,
- GPIO_FN_TSIF1_TS_XX1,
- GPIO_FN_TSIF1_TS_XX2,
- GPIO_FN_TSIF1_TS_XX3,
- GPIO_FN_TSIF1_TS_XX4,
- GPIO_FN_TSIF1_TS_XX5,
- GPIO_FN_TSIF0_TS_XX1,
- GPIO_FN_TSIF0_TS_XX2,
- GPIO_FN_TSIF0_TS_XX3,
- GPIO_FN_TSIF0_TS_XX4,
- GPIO_FN_TSIF0_TS_XX5,
- GPIO_FN_MST1_TS_XX1,
- GPIO_FN_MST1_TS_XX2,
- GPIO_FN_MST1_TS_XX3,
- GPIO_FN_MST1_TS_XX4,
- GPIO_FN_MST1_TS_XX5,
- GPIO_FN_MST0_TS_XX1,
- GPIO_FN_MST0_TS_XX2,
- GPIO_FN_MST0_TS_XX3,
- GPIO_FN_MST0_TS_XX4,
- GPIO_FN_MST0_TS_XX5,
-
- /* MSEL3 special cases */
- GPIO_FN_SDHI0_VCCQ_MC0_ON,
- GPIO_FN_SDHI0_VCCQ_MC0_OFF,
- GPIO_FN_DEBUG_MON_VIO,
- GPIO_FN_DEBUG_MON_LCDD,
- GPIO_FN_LCDC_LCDC0,
- GPIO_FN_LCDC_LCDC1,
-
- /* MSEL4 special cases */
- GPIO_FN_IRQ9_MEM_INT,
- GPIO_FN_IRQ9_MCP_INT,
- GPIO_FN_A11,
- GPIO_FN_KEYOUT8,
- GPIO_FN_TPU4TO3,
- GPIO_FN_RESETA_N_PU_ON,
- GPIO_FN_RESETA_N_PU_OFF,
- GPIO_FN_EDBGREQ_PD,
- GPIO_FN_EDBGREQ_PU,
-
- /* Functions with pull-ups */
- GPIO_FN_KEYIN0_PU,
- GPIO_FN_KEYIN1_PU,
- GPIO_FN_KEYIN2_PU,
- GPIO_FN_KEYIN3_PU,
- GPIO_FN_KEYIN4_PU,
- GPIO_FN_KEYIN5_PU,
- GPIO_FN_KEYIN6_PU,
- GPIO_FN_KEYIN7_PU,
- GPIO_FN_SDHICD0_PU,
- GPIO_FN_SDHID0_0_PU,
- GPIO_FN_SDHID0_1_PU,
- GPIO_FN_SDHID0_2_PU,
- GPIO_FN_SDHID0_3_PU,
- GPIO_FN_SDHICMD0_PU,
- GPIO_FN_SDHIWP0_PU,
- GPIO_FN_SDHID1_0_PU,
- GPIO_FN_SDHID1_1_PU,
- GPIO_FN_SDHID1_2_PU,
- GPIO_FN_SDHID1_3_PU,
- GPIO_FN_SDHICMD1_PU,
- GPIO_FN_SDHID2_0_PU,
- GPIO_FN_SDHID2_1_PU,
- GPIO_FN_SDHID2_2_PU,
- GPIO_FN_SDHID2_3_PU,
- GPIO_FN_SDHICMD2_PU,
- GPIO_FN_MMCCMD0_PU,
- GPIO_FN_MMCCMD1_PU,
- GPIO_FN_MMCD0_0_PU,
- GPIO_FN_MMCD0_1_PU,
- GPIO_FN_MMCD0_2_PU,
- GPIO_FN_MMCD0_3_PU,
- GPIO_FN_MMCD0_4_PU,
- GPIO_FN_MMCD0_5_PU,
- GPIO_FN_MMCD0_6_PU,
- GPIO_FN_MMCD0_7_PU,
- GPIO_FN_FSIACK_PU,
- GPIO_FN_FSIAILR_PU,
- GPIO_FN_FSIAIBT_PU,
- GPIO_FN_FSIAISLD_PU,
-
- /* end of GPIO */
- GPIO_NR,
-};
-
-/* DMA slave IDs */
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SCIF0_TX,
- SHDMA_SLAVE_SCIF0_RX,
- SHDMA_SLAVE_SCIF1_TX,
- SHDMA_SLAVE_SCIF1_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SCIF3_TX,
- SHDMA_SLAVE_SCIF3_RX,
- SHDMA_SLAVE_SCIF4_TX,
- SHDMA_SLAVE_SCIF4_RX,
- SHDMA_SLAVE_SCIF5_TX,
- SHDMA_SLAVE_SCIF5_RX,
- SHDMA_SLAVE_SCIF6_TX,
- SHDMA_SLAVE_SCIF6_RX,
- SHDMA_SLAVE_SCIF7_TX,
- SHDMA_SLAVE_SCIF7_RX,
- SHDMA_SLAVE_SCIF8_TX,
- SHDMA_SLAVE_SCIF8_RX,
- SHDMA_SLAVE_SDHI0_TX,
- SHDMA_SLAVE_SDHI0_RX,
- SHDMA_SLAVE_SDHI1_TX,
- SHDMA_SLAVE_SDHI1_RX,
- SHDMA_SLAVE_SDHI2_TX,
- SHDMA_SLAVE_SDHI2_RX,
- SHDMA_SLAVE_MMCIF_TX,
- SHDMA_SLAVE_MMCIF_RX,
-};
-
-/*
- * SH73A0 IRQ LOCATION TABLE
- *
- * 416 -----------------------------------------
- * IRQ0-IRQ15
- * 431 -----------------------------------------
- * ...
- * 448 -----------------------------------------
- * sh73a0-intcs
- * sh73a0-intca-irq-pins
- * 680 -----------------------------------------
- * ...
- * 700 -----------------------------------------
- * sh73a0-pint0
- * 731 -----------------------------------------
- * 732 -----------------------------------------
- * sh73a0-pint1
- * 739 -----------------------------------------
- * ...
- * 800 -----------------------------------------
- * IRQ16-IRQ31
- * 815 -----------------------------------------
- * ...
- * 928 -----------------------------------------
- * sh73a0-intca-irq-pins
- * 943 -----------------------------------------
- */
-
-/* PINT interrupts are located at Linux IRQ 700 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
-
-#endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-rmobile/include/mach/sh73a0.h b/arch/arm/mach-rmobile/include/mach/sh73a0.h
deleted file mode 100644
index bdbb4086421..00000000000
--- a/arch/arm/mach-rmobile/include/mach/sh73a0.h
+++ /dev/null
@@ -1,289 +0,0 @@
-#ifndef __ASM_ARCH_RMOBILE_SH73A0_H
-#define __ASM_ARCH_RMOBILE_SH73A0_H
-
-/* Global Timer */
-#define GLOBAL_TIMER_BASE_ADDR (0xF0000200)
-#define MERAM_BASE (0xE5580000)
-
-/* GIC */
-#define GIC_BASE (0xF0000100)
-#define ICCICR GIC_BASE
-
-/* Secure control register */
-#define LIFEC_SEC_SRC (0xE6110008)
-
-/* RWDT */
-#define RWDT_BASE (0xE6020000)
-
-/* HPB Semaphore Control Registers */
-#define HPB_BASE (0xE6001010)
-
-/* Bus Semaphore Control Registers */
-#define HPBSCR_BASE (0xE6001600)
-
-/* SBSC1 */
-#define SBSC1_BASE (0xFE400000)
-#define SDMRA1A (SBSC1_BASE + 0x100000)
-#define SDMRA2A (SBSC1_BASE + 0x1C0000)
-#define SDMRA3A (SBSC1_BASE + 0x104000)
-
-/* SBSC2 */
-#define SBSC2_BASE (0xFB400000)
-#define SDMRA1B (SBSC2_BASE + 0x100000)
-#define SDMRA2B (SBSC2_BASE + 0x1C0000)
-#define SDMRA3B (SBSC2_BASE + 0x104000)
-
-/* CPG */
-#define CPG_BASE (0xE6150000)
-#define CPG_SRCR_BASE (CPG_BASE + 0x80A0)
-#define WUPCR (CPG_BASE + 0x1010)
-#define SRESCR (CPG_BASE + 0x1018)
-#define PCLKCR (CPG_BASE + 0x1020)
-
-/* SYSC */
-#define SYSC_BASE (0xE6180000)
-#define RESCNT2 (SYSC_BASE + 0x8020)
-
-/* BSC */
-#define BSC_BASE (0xFEC10000)
-
-/* SCIF */
-#define SCIF0_BASE (0xE6C40000)
-#define SCIF1_BASE (0xE6C50000)
-#define SCIF2_BASE (0xE6C60000)
-#define SCIF3_BASE (0xE6C70000)
-#define SCIF4_BASE (0xE6C80000)
-#define SCIF5_BASE (0xE6CB0000)
-#define SCIF6_BASE (0xE6CC0000)
-#define SCIF7_BASE (0xE6CD0000)
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-/* RWDT */
-struct sh73a0_rwdt {
- u16 rwtcnt0; /* 0x00 */
- u16 dummy0; /* 0x02 */
- u16 rwtcsra0; /* 0x04 */
- u16 dummy1; /* 0x06 */
- u16 rwtcsrb0; /* 0x08 */
-};
-
-/* HPB Semaphore Control Registers */
-struct sh73a0_hpb {
- u32 hpbctrl0;
- u32 hpbctrl1;
- u32 hpbctrl2;
- u32 cccr;
- u32 dummy0; /* 0x20 */
- u32 hpbctrl4;
- u32 hpbctrl5;
- u32 dummy1; /* 0x2C */
- u32 hpbctrl6;
-};
-
-/* Bus Semaphore Control Registers */
-struct sh73a0_hpb_bscr {
- u32 mpsrc; /* 0x00 */
- u32 mpacctl; /* 0x04 */
- u32 dummy0[6];
- u32 smgpiosrc; /* 0x20 */
- u32 smgpioerr;
- u32 smgpiotime;
- u32 smgpiocnt;
- u32 dummy1[4]; /* 0x30 .. 0x3C */
- u32 smcmt2src;
- u32 smcmt2err;
- u32 smcmt2time;
- u32 smcmt2cnt;
- u32 smcpgsrc;
- u32 smcpgerr;
- u32 smcpgtime;
- u32 smcpgcnt;
- u32 dummy2[4]; /* 0x60 - 0x6C */
- u32 smsyscsrc;
- u32 smsyscerr;
- u32 smsysctime;
- u32 smsysccnt;
-};
-
-/* SBSC */
-struct sh73a0_sbsc {
- u32 dummy0[2]; /* 0x00, 0x04 */
- u32 sdcr0;
- u32 sdcr1;
- u32 sdpcr;
- u32 dummy1; /* 0x14 */
- u32 sdcr0s;
- u32 sdcr1s;
- u32 rtcsr;
- u32 dummy2; /* 0x24 */
- u32 rtcor;
- u32 rtcorh;
- u32 rtcors;
- u32 rtcorsh;
- u32 dummy3[2]; /* 0x38, 0x3C */
- u32 sdwcrc0;
- u32 sdwcrc1;
- u32 sdwcr00;
- u32 sdwcr01;
- u32 sdwcr10;
- u32 sdwcr11;
- u32 sdpdcr0;
- u32 dummy4; /* 0x5C */
- u32 sdwcr2;
- u32 sdwcrc2;
- u32 zqccr;
- u32 dummy5[6]; /* 0x6C .. 0x80 */
- u32 sdmracr0;
- u32 dummy6; /* 0x88 */
- u32 sdmrtmpcr;
- u32 dummy7; /* 0x90 */
- u32 sdmrtmpmsk;
- u32 dummy8; /* 0x98 */
- u32 sdgencnt;
- u32 dphycnt0;
- u32 dphycnt1;
- u32 dphycnt2;
- u32 dummy9[2]; /* 0xAC .. 0xB0 */
- u32 sddrvcr0;
- u32 dummy10[14]; /* 0xB8 .. 0xEC */
- u32 dptdivcr0;
- u32 dptdivcr1;
- u32 dptdivcr2;
- u32 dummy11; /* 0xFC */
- u32 sdptcr0;
- u32 sdptcr1;
- u32 sdptcr2;
- u32 sdptcr3; /* 0x10C */
- u32 dummy12[145]; /* 0x110 .. 0x350 */
- u32 dllcnt0; /* 0x354 */
- u32 sbscmon0;
-};
-
-/* CPG */
-struct sh73a0_sbsc_cpg {
- u32 frqcra; /* 0x00 */
- u32 frqcrb;
- u32 vclkcr1;
- u32 vclkcr2;
- u32 zbckcr;
- u32 flckcr;
- u32 fsiackcr;
- u32 vclkcr3;
- u32 rtstbcr;
- u32 systbcr;
- u32 pll1cr;
- u32 pll2cr;
- u32 mstpsr0;
- u32 dummy0; /* 0x34 */
- u32 mstpsr1;
- u32 mstpsr5;
- u32 mstpsr2;
- u32 dummy1; /* 0x44 */
- u32 mstpsr3;
- u32 mstpsr4;
- u32 dummy2; /* 0x50 */
- u32 astat;
- u32 dvfscr0;
- u32 dvfscr1;
- u32 dsitckcr;
- u32 dsi0pckcr;
- u32 dsi1pckcr;
- u32 dsi0phycr;
- u32 dsi1phycr;
- u32 sd0ckcr;
- u32 sd1ckcr;
- u32 sd2ckcr;
- u32 subckcr;
- u32 spuackcr;
- u32 msuckcr;
- u32 hsickcr;
- u32 fsibckcr;
- u32 spuvckcr;
- u32 mfck1cr;
- u32 mfck2cr;
- u32 dummy3[8]; /* 0xA0 .. 0xBC */
- u32 ckscr;
- u32 dummy4; /* 0xC4 */
- u32 pll1stpcr;
- u32 mpmode;
- u32 pllecr;
- u32 dummy5; /* 0xD4 */
- u32 pll0cr;
- u32 pll3cr;
- u32 dummy6; /* 0xE0 */
- u32 frqcrd;
- u32 dummyi7; /* 0xE8 */
- u32 vrefcr;
- u32 pll0stpcr;
- u32 dummy8; /* 0xF4 */
- u32 pll2stpcr;
- u32 pll3stpcr;
- u32 dummy9[4]; /* 0x100 .. 0x10c */
- u32 rmstpcr0;
- u32 rmstpcr1;
- u32 rmstpcr2;
- u32 rmstpcr3;
- u32 rmstpcr4;
- u32 rmstpcr5;
- u32 dummy10[2]; /* 0x128 .. 0x12c */
- u32 smstpcr0;
- u32 smstpcr1;
- u32 smstpcr2;
- u32 smstpcr3;
- u32 smstpcr4;
- u32 smstpcr5;
- u32 dummy11[2]; /* 0x148 .. 0x14c */
- u32 cpgxxcs4;
- u32 dummy12[7]; /* 0x154 .. 0x16c */
- u32 dvfscr2;
- u32 dvfscr3;
- u32 dvfscr4;
- u32 dvfscr5; /* 0x17C */
-};
-
-/* CPG SRCR part OK */
-struct sh73a0_sbsc_cpg_srcr {
- u32 srcr0;
- u32 dummy0; /* 0xA4 */
- u32 srcr1;
- u32 dummy1; /* 0xAC */
- u32 srcr2;
- u32 dummy2; /* 0xB4 */
- u32 srcr3;
- u32 srcr4;
- u32 dummy3; /* 0xC0 */
- u32 srcr5;
-};
-
-/* BSC */
-struct sh73a0_bsc {
- u32 cmncr;
- u32 cs0bcr;
- u32 cs2bcr;
- u32 dummy0; /* 0x0C */
- u32 cs4bcr;
- u32 cs5abcr;
- u32 cs5bbcr;
- u32 cs6abcr;
- u32 cs6bbcr;
- u32 cs0wcr;
- u32 cs2wcr;
- u32 dummy1; /* 0x2C */
- u32 cs4wcr;
- u32 cs5awcr;
- u32 cs5bwcr;
- u32 cs6awcr;
- u32 cs6bwcr;
- u32 rbwtcnt;
- u32 busycr;
- u32 dummy2; /* 0x5c */
- u32 cs7abcr;
- u32 cs7awcr;
- u32 dummy3[2]; /* 0x68, 0x6C */
- u32 bromtimcr;
-};
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_RMOBILE_SH73A0_H */
diff --git a/arch/arm/mach-rmobile/pfc-sh73a0.c b/arch/arm/mach-rmobile/pfc-sh73a0.c
deleted file mode 100644
index 55dab7c1389..00000000000
--- a/arch/arm/mach-rmobile/pfc-sh73a0.c
+++ /dev/null
@@ -1,2807 +0,0 @@
-/*
- * sh73a0 processor support - PFC hardware block
- *
- * Copyright (C) 2010 Renesas Solutions Corp.
- * Copyright (C) 2010 NISHIMOTO Hiroki
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the
- * License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <common.h>
-#include <sh_pfc.h>
-#include <asm/arch/sh73a0-gpio.h>
-
-#define CPU_ALL_PORT(fn, pfx, sfx) \
- PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
- PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx), \
- PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx), \
- PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx), \
- PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx), \
- PORT_10(fn, pfx##10, sfx), \
- PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
- PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
- PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
- PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
- PORT_1(fn, pfx##118, sfx), \
- PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
- PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
- PORT_10(fn, pfx##15, sfx), \
- PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
- PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
- PORT_1(fn, pfx##164, sfx), \
- PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
- PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
- PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
- PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
- PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
- PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
- PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
- PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx), \
- PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx), \
- PORT_1(fn, pfx##282, sfx), \
- PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx), \
- PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PORT_ALL(DATA), /* PORT0_DATA -> PORT309_DATA */
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PORT_ALL(IN), /* PORT0_IN -> PORT309_IN */
- PINMUX_INPUT_END,
-
- PINMUX_INPUT_PULLUP_BEGIN,
- PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
- PINMUX_INPUT_PULLUP_END,
-
- PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
- PINMUX_INPUT_PULLDOWN_END,
-
- PINMUX_OUTPUT_BEGIN,
- PORT_ALL(OUT), /* PORT0_OUT -> PORT309_OUT */
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
- PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
- PORT_ALL(FN0), /* PORT0_FN0 -> PORT309_FN0 */
- PORT_ALL(FN1), /* PORT0_FN1 -> PORT309_FN1 */
- PORT_ALL(FN2), /* PORT0_FN2 -> PORT309_FN2 */
- PORT_ALL(FN3), /* PORT0_FN3 -> PORT309_FN3 */
- PORT_ALL(FN4), /* PORT0_FN4 -> PORT309_FN4 */
- PORT_ALL(FN5), /* PORT0_FN5 -> PORT309_FN5 */
- PORT_ALL(FN6), /* PORT0_FN6 -> PORT309_FN6 */
- PORT_ALL(FN7), /* PORT0_FN7 -> PORT309_FN7 */
-
- MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
- MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
- MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
- MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
- MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
- MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
- MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
- MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
- MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
- MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
- MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
- MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
- MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
- MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
- MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
- MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
- MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
- MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
- MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
- MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
- MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
- MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
- MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
- MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
- MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
- MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
- MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
- MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
- MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
- MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
- MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
- MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
- MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
- MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
- MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
- MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
- MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
- MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
- MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
- MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
- MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* Hardware manual Table 25-1 (Function 0-7) */
- VBUS_0_MARK,
- GPI0_MARK,
- GPI1_MARK,
- GPI2_MARK,
- GPI3_MARK,
- GPI4_MARK,
- GPI5_MARK,
- GPI6_MARK,
- GPI7_MARK,
- SCIFA7_RXD_MARK,
- SCIFA7_CTS__MARK,
- GPO7_MARK, MFG0_OUT2_MARK,
- GPO6_MARK, MFG1_OUT2_MARK,
- GPO5_MARK, SCIFA0_SCK_MARK, FSICOSLDT3_MARK, PORT16_VIO_CKOR_MARK,
- SCIFA0_TXD_MARK,
- SCIFA7_TXD_MARK,
- SCIFA7_RTS__MARK, PORT19_VIO_CKO2_MARK,
- GPO0_MARK,
- GPO1_MARK,
- GPO2_MARK, STATUS0_MARK,
- GPO3_MARK, STATUS1_MARK,
- GPO4_MARK, STATUS2_MARK,
- VINT_MARK,
- TCKON_MARK,
- XDVFS1_MARK, PORT27_I2C_SCL2_MARK, PORT27_I2C_SCL3_MARK, \
- MFG0_OUT1_MARK, PORT27_IROUT_MARK,
- XDVFS2_MARK, PORT28_I2C_SDA2_MARK, PORT28_I2C_SDA3_MARK, \
- PORT28_TPU1TO1_MARK,
- SIM_RST_MARK, PORT29_TPU1TO1_MARK,
- SIM_CLK_MARK, PORT30_VIO_CKOR_MARK,
- SIM_D_MARK, PORT31_IROUT_MARK,
- SCIFA4_TXD_MARK,
- SCIFA4_RXD_MARK, XWUP_MARK,
- SCIFA4_RTS__MARK,
- SCIFA4_CTS__MARK,
- FSIBOBT_MARK, FSIBIBT_MARK,
- FSIBOLR_MARK, FSIBILR_MARK,
- FSIBOSLD_MARK,
- FSIBISLD_MARK,
- VACK_MARK,
- XTAL1L_MARK,
- SCIFA0_RTS__MARK, FSICOSLDT2_MARK,
- SCIFA0_RXD_MARK,
- SCIFA0_CTS__MARK, FSICOSLDT1_MARK,
- FSICOBT_MARK, FSICIBT_MARK, FSIDOBT_MARK, FSIDIBT_MARK,
- FSICOLR_MARK, FSICILR_MARK, FSIDOLR_MARK, FSIDILR_MARK,
- FSICOSLD_MARK, PORT47_FSICSPDIF_MARK,
- FSICISLD_MARK, FSIDISLD_MARK,
- FSIACK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, FSIAOMC_MARK,
- FSIAOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, FSIAILR_MARK,
-
- FSIAOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, FSIAIBT_MARK,
- FSIAOSLD_MARK, BBIF2_TXD2_MARK,
- FSIASPDIF_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, FSIBSPDIF_MARK, \
- PORT53_FSICSPDIF_MARK,
- FSIBCK_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FSIBOMC_MARK, \
- FSICCK_MARK, FSICOMC_MARK,
- FSIAISLD_MARK, TPU0TO0_MARK,
- A0_MARK, BS__MARK,
- A12_MARK, PORT58_KEYOUT7_MARK, TPU4TO2_MARK,
- A13_MARK, PORT59_KEYOUT6_MARK, TPU0TO1_MARK,
- A14_MARK, KEYOUT5_MARK,
- A15_MARK, KEYOUT4_MARK,
- A16_MARK, KEYOUT3_MARK, MSIOF0_SS1_MARK,
- A17_MARK, KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
- A18_MARK, KEYOUT1_MARK, MSIOF0_TSCK_MARK,
- A19_MARK, KEYOUT0_MARK, MSIOF0_TXD_MARK,
- A20_MARK, KEYIN0_MARK, MSIOF0_RSCK_MARK,
- A21_MARK, KEYIN1_MARK, MSIOF0_RSYNC_MARK,
- A22_MARK, KEYIN2_MARK, MSIOF0_MCK0_MARK,
- A23_MARK, KEYIN3_MARK, MSIOF0_MCK1_MARK,
- A24_MARK, KEYIN4_MARK, MSIOF0_RXD_MARK,
- A25_MARK, KEYIN5_MARK, MSIOF0_SS2_MARK,
- A26_MARK, KEYIN6_MARK,
- KEYIN7_MARK,
- D0_NAF0_MARK,
- D1_NAF1_MARK,
- D2_NAF2_MARK,
- D3_NAF3_MARK,
- D4_NAF4_MARK,
- D5_NAF5_MARK,
- D6_NAF6_MARK,
- D7_NAF7_MARK,
- D8_NAF8_MARK,
- D9_NAF9_MARK,
- D10_NAF10_MARK,
- D11_NAF11_MARK,
- D12_NAF12_MARK,
- D13_NAF13_MARK,
- D14_NAF14_MARK,
- D15_NAF15_MARK,
- CS4__MARK,
- CS5A__MARK, PORT91_RDWR_MARK,
- CS5B__MARK, FCE1__MARK,
- CS6B__MARK, DACK0_MARK,
- FCE0__MARK, CS6A__MARK,
- WAIT__MARK, DREQ0_MARK,
- RD__FSC_MARK,
- WE0__FWE_MARK, RDWR_FWE_MARK,
- WE1__MARK,
- FRB_MARK,
- CKO_MARK,
- NBRSTOUT__MARK,
- NBRST__MARK,
- BBIF2_TXD_MARK,
- BBIF2_RXD_MARK,
- BBIF2_SYNC_MARK,
- BBIF2_SCK_MARK,
- SCIFA3_CTS__MARK, MFG3_IN2_MARK,
- SCIFA3_RXD_MARK, MFG3_IN1_MARK,
- BBIF1_SS2_MARK, SCIFA3_RTS__MARK, MFG3_OUT1_MARK,
- SCIFA3_TXD_MARK,
- HSI_RX_DATA_MARK, BBIF1_RXD_MARK,
- HSI_TX_WAKE_MARK, BBIF1_TSCK_MARK,
- HSI_TX_DATA_MARK, BBIF1_TSYNC_MARK,
- HSI_TX_READY_MARK, BBIF1_TXD_MARK,
- HSI_RX_READY_MARK, BBIF1_RSCK_MARK, PORT115_I2C_SCL2_MARK, \
- PORT115_I2C_SCL3_MARK,
- HSI_RX_WAKE_MARK, BBIF1_RSYNC_MARK, PORT116_I2C_SDA2_MARK, \
- PORT116_I2C_SDA3_MARK,
- HSI_RX_FLAG_MARK, BBIF1_SS1_MARK, BBIF1_FLOW_MARK,
- HSI_TX_FLAG_MARK,
- VIO_VD_MARK, PORT128_LCD2VSYN_MARK, VIO2_VD_MARK, LCD2D0_MARK,
-
- VIO_HD_MARK, PORT129_LCD2HSYN_MARK, PORT129_LCD2CS__MARK, \
- VIO2_HD_MARK, LCD2D1_MARK,
- VIO_D0_MARK, PORT130_MSIOF2_RXD_MARK, LCD2D10_MARK,
- VIO_D1_MARK, PORT131_KEYOUT6_MARK, PORT131_MSIOF2_SS1_MARK, \
- PORT131_KEYOUT11_MARK, LCD2D11_MARK,
- VIO_D2_MARK, PORT132_KEYOUT7_MARK, PORT132_MSIOF2_SS2_MARK, \
- PORT132_KEYOUT10_MARK, LCD2D12_MARK,
- VIO_D3_MARK, MSIOF2_TSYNC_MARK, LCD2D13_MARK,
- VIO_D4_MARK, MSIOF2_TXD_MARK, LCD2D14_MARK,
- VIO_D5_MARK, MSIOF2_TSCK_MARK, LCD2D15_MARK,
- VIO_D6_MARK, PORT136_KEYOUT8_MARK, LCD2D16_MARK,
- VIO_D7_MARK, PORT137_KEYOUT9_MARK, LCD2D17_MARK,
- VIO_D8_MARK, PORT138_KEYOUT8_MARK, VIO2_D0_MARK, LCD2D6_MARK,
- VIO_D9_MARK, PORT139_KEYOUT9_MARK, VIO2_D1_MARK, LCD2D7_MARK,
- VIO_D10_MARK, TPU0TO2_MARK, VIO2_D2_MARK, LCD2D8_MARK,
- VIO_D11_MARK, TPU0TO3_MARK, VIO2_D3_MARK, LCD2D9_MARK,
- VIO_D12_MARK, PORT142_KEYOUT10_MARK, VIO2_D4_MARK, LCD2D2_MARK,
- VIO_D13_MARK, PORT143_KEYOUT11_MARK, PORT143_KEYOUT6_MARK, \
- VIO2_D5_MARK, LCD2D3_MARK,
- VIO_D14_MARK, PORT144_KEYOUT7_MARK, VIO2_D6_MARK, LCD2D4_MARK,
- VIO_D15_MARK, TPU1TO3_MARK, PORT145_LCD2DISP_MARK, \
- PORT145_LCD2RS_MARK, VIO2_D7_MARK, LCD2D5_MARK,
- VIO_CLK_MARK, LCD2DCK_MARK, PORT146_LCD2WR__MARK, VIO2_CLK_MARK, \
- LCD2D18_MARK,
- VIO_FIELD_MARK, LCD2RD__MARK, VIO2_FIELD_MARK, LCD2D19_MARK,
- VIO_CKO_MARK,
- A27_MARK, PORT149_RDWR_MARK, MFG0_IN1_MARK, PORT149_KEYOUT9_MARK,
- MFG0_IN2_MARK,
- TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
- TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
- TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
- SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
- SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
- SCIFA2_RTS1__MARK, PORT156_MSIOF2_SS2_MARK,
- SCIFA2_CTS1__MARK, PORT157_MSIOF2_RXD_MARK,
- DINT__MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
- PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
- PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK,
- PORT161_SCIFB_CTS__MARK, PORT161_SCIFA5_CTS__MARK,
- PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK,
- PORT163_SCIFB_RTS__MARK, PORT163_SCIFA5_RTS__MARK, TPU3TO0_MARK,
- LCDD0_MARK,
- LCDD1_MARK, PORT193_SCIFA5_CTS__MARK, BBIF2_TSYNC1_MARK,
- LCDD2_MARK, PORT194_SCIFA5_RTS__MARK, BBIF2_TSCK1_MARK,
- LCDD3_MARK, PORT195_SCIFA5_RXD_MARK, BBIF2_TXD1_MARK,
- LCDD4_MARK, PORT196_SCIFA5_TXD_MARK,
- LCDD5_MARK, PORT197_SCIFA5_SCK_MARK, MFG2_OUT2_MARK, TPU2TO1_MARK,
- LCDD6_MARK,
- LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK,
- LCDD8_MARK, D16_MARK,
- LCDD9_MARK, D17_MARK,
- LCDD10_MARK, D18_MARK,
- LCDD11_MARK, D19_MARK,
- LCDD12_MARK, D20_MARK,
- LCDD13_MARK, D21_MARK,
- LCDD14_MARK, D22_MARK,
- LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, D23_MARK,
- LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, D24_MARK,
- LCDD17_MARK, D25_MARK,
- LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK,
- LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK,
- LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK,
- LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK,
- LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK,
- LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK,
- LCDDCK_MARK, LCDWR__MARK,
- LCDRD__MARK, DACK2_MARK, PORT217_LCD2RS_MARK, MSIOF0L_TSYNC_MARK, \
- VIO2_FIELD3_MARK, PORT217_LCD2DISP_MARK,
- LCDHSYN_MARK, LCDCS__MARK, LCDCS2__MARK, DACK3_MARK, \
- PORT218_VIO_CKOR_MARK,
- LCDDISP_MARK, LCDRS_MARK, PORT219_LCD2WR__MARK, DREQ3_MARK, \
- MSIOF0L_TSCK_MARK, VIO2_CLK3_MARK, LCD2DCK_2_MARK,
- LCDVSYN_MARK, LCDVSYN2_MARK,
- LCDLCLK_MARK, DREQ1_MARK, PORT221_LCD2CS__MARK, PWEN_MARK, \
- MSIOF0L_RXD_MARK, VIO2_HD3_MARK, PORT221_LCD2HSYN_MARK,
- LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, \
- VIO2_VD3_MARK, PORT222_LCD2VSYN_MARK,
-
- SCIFA1_TXD_MARK, OVCN2_MARK,
- EXTLP_MARK, SCIFA1_SCK_MARK, PORT226_VIO_CKO2_MARK,
- SCIFA1_RTS__MARK, IDIN_MARK,
- SCIFA1_RXD_MARK,
- SCIFA1_CTS__MARK, MFG1_IN1_MARK,
- MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK,
- MSIOF1_TSYNC_MARK, SCIFA2_CTS2__MARK,
- MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK,
- MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK,
- MSIOF1_RSCK_MARK, SCIFA2_RTS2__MARK, VIO2_CLK2_MARK, LCD2D20_MARK,
- MSIOF1_RSYNC_MARK, MFG1_IN2_MARK, VIO2_VD2_MARK, LCD2D21_MARK,
- MSIOF1_MCK0_MARK, PORT236_I2C_SDA2_MARK,
- MSIOF1_MCK1_MARK, PORT237_I2C_SCL2_MARK,
- MSIOF1_SS1_MARK, VIO2_FIELD2_MARK, LCD2D22_MARK,
- MSIOF1_SS2_MARK, VIO2_HD2_MARK, LCD2D23_MARK,
- SCIFA6_TXD_MARK,
- PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, TPU4TO0_MARK,
- PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
- PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
- PORT244_SCIFA5_CTS__MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS__MARK, \
- MSIOF2R_RXD_MARK,
- PORT245_SCIFA5_RTS__MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS__MARK, \
- MSIOF2R_TXD_MARK,
- PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, \
- TPU1TO0_MARK,
- PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, \
- TPU3TO1_MARK,
- PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, \
- TPU2TO0_MARK, PORT248_I2C_SCL3_MARK, MSIOF2R_TSCK_MARK,
- PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_I2C_SDA3_MARK, \
- MSIOF2R_TSYNC_MARK,
- SDHICLK0_MARK,
- SDHICD0_MARK,
- SDHID0_0_MARK,
- SDHID0_1_MARK,
- SDHID0_2_MARK,
- SDHID0_3_MARK,
- SDHICMD0_MARK,
- SDHIWP0_MARK,
- SDHICLK1_MARK,
- SDHID1_0_MARK, TS_SPSYNC2_MARK,
- SDHID1_1_MARK, TS_SDAT2_MARK,
- SDHID1_2_MARK, TS_SDEN2_MARK,
- SDHID1_3_MARK, TS_SCK2_MARK,
- SDHICMD1_MARK,
- SDHICLK2_MARK,
- SDHID2_0_MARK, TS_SPSYNC4_MARK,
- SDHID2_1_MARK, TS_SDAT4_MARK,
- SDHID2_2_MARK, TS_SDEN4_MARK,
- SDHID2_3_MARK, TS_SCK4_MARK,
- SDHICMD2_MARK,
- MMCCLK0_MARK,
- MMCD0_0_MARK,
- MMCD0_1_MARK,
- MMCD0_2_MARK,
- MMCD0_3_MARK,
- MMCD0_4_MARK, TS_SPSYNC5_MARK,
- MMCD0_5_MARK, TS_SDAT5_MARK,
- MMCD0_6_MARK, TS_SDEN5_MARK,
- MMCD0_7_MARK, TS_SCK5_MARK,
- MMCCMD0_MARK,
- RESETOUTS__MARK, EXTAL2OUT_MARK,
- MCP_WAIT__MCP_FRB_MARK,
- MCP_CKO_MARK, MMCCLK1_MARK,
- MCP_D15_MCP_NAF15_MARK,
- MCP_D14_MCP_NAF14_MARK,
- MCP_D13_MCP_NAF13_MARK,
- MCP_D12_MCP_NAF12_MARK,
- MCP_D11_MCP_NAF11_MARK,
- MCP_D10_MCP_NAF10_MARK,
- MCP_D9_MCP_NAF9_MARK,
- MCP_D8_MCP_NAF8_MARK, MMCCMD1_MARK,
- MCP_D7_MCP_NAF7_MARK, MMCD1_7_MARK,
-
- MCP_D6_MCP_NAF6_MARK, MMCD1_6_MARK,
- MCP_D5_MCP_NAF5_MARK, MMCD1_5_MARK,
- MCP_D4_MCP_NAF4_MARK, MMCD1_4_MARK,
- MCP_D3_MCP_NAF3_MARK, MMCD1_3_MARK,
- MCP_D2_MCP_NAF2_MARK, MMCD1_2_MARK,
- MCP_D1_MCP_NAF1_MARK, MMCD1_1_MARK,
- MCP_D0_MCP_NAF0_MARK, MMCD1_0_MARK,
- MCP_NBRSTOUT__MARK,
- MCP_WE0__MCP_FWE_MARK, MCP_RDWR_MCP_FWE_MARK,
-
- /* MSEL2 special cases */
- TSIF2_TS_XX1_MARK,
- TSIF2_TS_XX2_MARK,
- TSIF2_TS_XX3_MARK,
- TSIF2_TS_XX4_MARK,
- TSIF2_TS_XX5_MARK,
- TSIF1_TS_XX1_MARK,
- TSIF1_TS_XX2_MARK,
- TSIF1_TS_XX3_MARK,
- TSIF1_TS_XX4_MARK,
- TSIF1_TS_XX5_MARK,
- TSIF0_TS_XX1_MARK,
- TSIF0_TS_XX2_MARK,
- TSIF0_TS_XX3_MARK,
- TSIF0_TS_XX4_MARK,
- TSIF0_TS_XX5_MARK,
- MST1_TS_XX1_MARK,
- MST1_TS_XX2_MARK,
- MST1_TS_XX3_MARK,
- MST1_TS_XX4_MARK,
- MST1_TS_XX5_MARK,
- MST0_TS_XX1_MARK,
- MST0_TS_XX2_MARK,
- MST0_TS_XX3_MARK,
- MST0_TS_XX4_MARK,
- MST0_TS_XX5_MARK,
-
- /* MSEL3 special cases */
- SDHI0_VCCQ_MC0_ON_MARK,
- SDHI0_VCCQ_MC0_OFF_MARK,
- DEBUG_MON_VIO_MARK,
- DEBUG_MON_LCDD_MARK,
- LCDC_LCDC0_MARK,
- LCDC_LCDC1_MARK,
-
- /* MSEL4 special cases */
- IRQ9_MEM_INT_MARK,
- IRQ9_MCP_INT_MARK,
- A11_MARK,
- KEYOUT8_MARK,
- TPU4TO3_MARK,
- RESETA_N_PU_ON_MARK,
- RESETA_N_PU_OFF_MARK,
- EDBGREQ_PD_MARK,
- EDBGREQ_PU_MARK,
-
- /* Functions with pull-ups */
- KEYIN0_PU_MARK,
- KEYIN1_PU_MARK,
- KEYIN2_PU_MARK,
- KEYIN3_PU_MARK,
- KEYIN4_PU_MARK,
- KEYIN5_PU_MARK,
- KEYIN6_PU_MARK,
- KEYIN7_PU_MARK,
- SDHICD0_PU_MARK,
- SDHID0_0_PU_MARK,
- SDHID0_1_PU_MARK,
- SDHID0_2_PU_MARK,
- SDHID0_3_PU_MARK,
- SDHICMD0_PU_MARK,
- SDHIWP0_PU_MARK,
- SDHID1_0_PU_MARK,
- SDHID1_1_PU_MARK,
- SDHID1_2_PU_MARK,
- SDHID1_3_PU_MARK,
- SDHICMD1_PU_MARK,
- SDHID2_0_PU_MARK,
- SDHID2_1_PU_MARK,
- SDHID2_2_PU_MARK,
- SDHID2_3_PU_MARK,
- SDHICMD2_PU_MARK,
- MMCCMD0_PU_MARK,
- MMCCMD1_PU_MARK,
- MMCD0_0_PU_MARK,
- MMCD0_1_PU_MARK,
- MMCD0_2_PU_MARK,
- MMCD0_3_PU_MARK,
- MMCD0_4_PU_MARK,
- MMCD0_5_PU_MARK,
- MMCD0_6_PU_MARK,
- MMCD0_7_PU_MARK,
- FSIBISLD_PU_MARK,
- FSIACK_PU_MARK,
- FSIAILR_PU_MARK,
- FSIAIBT_PU_MARK,
- FSIAISLD_PU_MARK,
-
- PINMUX_MARK_END,
-};
-
-static unsigned short pinmux_data[] = {
- /* specify valid pin states for each pin in GPIO mode */
-
- /* Table 25-1 (I/O and Pull U/D) */
- PORT_DATA_I_PD(0),
- PORT_DATA_I_PU(1),
- PORT_DATA_I_PU(2),
- PORT_DATA_I_PU(3),
- PORT_DATA_I_PU(4),
- PORT_DATA_I_PU(5),
- PORT_DATA_I_PU(6),
- PORT_DATA_I_PU(7),
- PORT_DATA_I_PU(8),
- PORT_DATA_I_PD(9),
- PORT_DATA_I_PD(10),
- PORT_DATA_I_PU_PD(11),
- PORT_DATA_IO_PU_PD(12),
- PORT_DATA_IO_PU_PD(13),
- PORT_DATA_IO_PU_PD(14),
- PORT_DATA_IO_PU_PD(15),
- PORT_DATA_IO_PD(16),
- PORT_DATA_IO_PD(17),
- PORT_DATA_IO_PU(18),
- PORT_DATA_IO_PU(19),
- PORT_DATA_O(20),
- PORT_DATA_O(21),
- PORT_DATA_O(22),
- PORT_DATA_O(23),
- PORT_DATA_O(24),
- PORT_DATA_I_PD(25),
- PORT_DATA_I_PD(26),
- PORT_DATA_IO_PU(27),
- PORT_DATA_IO_PU(28),
- PORT_DATA_IO_PD(29),
- PORT_DATA_IO_PD(30),
- PORT_DATA_IO_PU(31),
- PORT_DATA_IO_PD(32),
- PORT_DATA_I_PU_PD(33),
- PORT_DATA_IO_PD(34),
- PORT_DATA_I_PU_PD(35),
- PORT_DATA_IO_PD(36),
- PORT_DATA_IO(37),
- PORT_DATA_O(38),
- PORT_DATA_I_PU(39),
- PORT_DATA_I_PU_PD(40),
- PORT_DATA_O(41),
- PORT_DATA_IO_PD(42),
- PORT_DATA_IO_PU_PD(43),
- PORT_DATA_IO_PU_PD(44),
- PORT_DATA_IO_PD(45),
- PORT_DATA_IO_PD(46),
- PORT_DATA_IO_PD(47),
- PORT_DATA_I_PD(48),
- PORT_DATA_IO_PU_PD(49),
- PORT_DATA_IO_PD(50),
-
- PORT_DATA_IO_PD(51),
- PORT_DATA_O(52),
- PORT_DATA_IO_PU_PD(53),
- PORT_DATA_IO_PU_PD(54),
- PORT_DATA_IO_PD(55),
- PORT_DATA_I_PU_PD(56),
- PORT_DATA_IO(57),
- PORT_DATA_IO(58),
- PORT_DATA_IO(59),
- PORT_DATA_IO(60),
- PORT_DATA_IO(61),
- PORT_DATA_IO_PD(62),
- PORT_DATA_IO_PD(63),
- PORT_DATA_IO_PU_PD(64),
- PORT_DATA_IO_PD(65),
- PORT_DATA_IO_PU_PD(66),
- PORT_DATA_IO_PU_PD(67),
- PORT_DATA_IO_PU_PD(68),
- PORT_DATA_IO_PU_PD(69),
- PORT_DATA_IO_PU_PD(70),
- PORT_DATA_IO_PU_PD(71),
- PORT_DATA_IO_PU_PD(72),
- PORT_DATA_I_PU_PD(73),
- PORT_DATA_IO_PU(74),
- PORT_DATA_IO_PU(75),
- PORT_DATA_IO_PU(76),
- PORT_DATA_IO_PU(77),
- PORT_DATA_IO_PU(78),
- PORT_DATA_IO_PU(79),
- PORT_DATA_IO_PU(80),
- PORT_DATA_IO_PU(81),
- PORT_DATA_IO_PU(82),
- PORT_DATA_IO_PU(83),
- PORT_DATA_IO_PU(84),
- PORT_DATA_IO_PU(85),
- PORT_DATA_IO_PU(86),
- PORT_DATA_IO_PU(87),
- PORT_DATA_IO_PU(88),
- PORT_DATA_IO_PU(89),
- PORT_DATA_O(90),
- PORT_DATA_IO_PU(91),
- PORT_DATA_O(92),
- PORT_DATA_IO_PU(93),
- PORT_DATA_O(94),
- PORT_DATA_I_PU_PD(95),
- PORT_DATA_IO(96),
- PORT_DATA_IO(97),
- PORT_DATA_IO(98),
- PORT_DATA_I_PU(99),
- PORT_DATA_O(100),
- PORT_DATA_O(101),
- PORT_DATA_I_PU(102),
- PORT_DATA_IO_PD(103),
- PORT_DATA_I_PU_PD(104),
- PORT_DATA_I_PD(105),
- PORT_DATA_I_PD(106),
- PORT_DATA_I_PU_PD(107),
- PORT_DATA_I_PU_PD(108),
- PORT_DATA_IO_PD(109),
- PORT_DATA_IO_PD(110),
- PORT_DATA_IO_PU_PD(111),
- PORT_DATA_IO_PU_PD(112),
- PORT_DATA_IO_PU_PD(113),
- PORT_DATA_IO_PD(114),
- PORT_DATA_IO_PU(115),
- PORT_DATA_IO_PU(116),
- PORT_DATA_IO_PU_PD(117),
- PORT_DATA_IO_PU_PD(118),
- PORT_DATA_IO_PD(128),
-
- PORT_DATA_IO_PD(129),
- PORT_DATA_IO_PU_PD(130),
- PORT_DATA_IO_PD(131),
- PORT_DATA_IO_PD(132),
- PORT_DATA_IO_PD(133),
- PORT_DATA_IO_PU_PD(134),
- PORT_DATA_IO_PU_PD(135),
- PORT_DATA_IO_PU_PD(136),
- PORT_DATA_IO_PU_PD(137),
- PORT_DATA_IO_PD(138),
- PORT_DATA_IO_PD(139),
- PORT_DATA_IO_PD(140),
- PORT_DATA_IO_PD(141),
- PORT_DATA_IO_PD(142),
- PORT_DATA_IO_PD(143),
- PORT_DATA_IO_PU_PD(144),
- PORT_DATA_IO_PD(145),
- PORT_DATA_IO_PU_PD(146),
- PORT_DATA_IO_PU_PD(147),
- PORT_DATA_IO_PU_PD(148),
- PORT_DATA_IO_PU_PD(149),
- PORT_DATA_I_PU_PD(150),
- PORT_DATA_IO_PU_PD(151),
- PORT_DATA_IO_PU_PD(152),
- PORT_DATA_IO_PD(153),
- PORT_DATA_IO_PD(154),
- PORT_DATA_I_PU_PD(155),
- PORT_DATA_IO_PU_PD(156),
- PORT_DATA_I_PD(157),
- PORT_DATA_IO_PD(158),
- PORT_DATA_IO_PU_PD(159),
- PORT_DATA_IO_PU_PD(160),
- PORT_DATA_I_PU_PD(161),
- PORT_DATA_I_PU_PD(162),
- PORT_DATA_IO_PU_PD(163),
- PORT_DATA_I_PU_PD(164),
- PORT_DATA_IO_PD(192),
- PORT_DATA_IO_PU_PD(193),
- PORT_DATA_IO_PD(194),
- PORT_DATA_IO_PU_PD(195),
- PORT_DATA_IO_PD(196),
- PORT_DATA_IO_PD(197),
- PORT_DATA_IO_PD(198),
- PORT_DATA_IO_PD(199),
- PORT_DATA_IO_PU_PD(200),
- PORT_DATA_IO_PU_PD(201),
- PORT_DATA_IO_PU_PD(202),
- PORT_DATA_IO_PU_PD(203),
- PORT_DATA_IO_PU_PD(204),
- PORT_DATA_IO_PU_PD(205),
- PORT_DATA_IO_PU_PD(206),
- PORT_DATA_IO_PD(207),
- PORT_DATA_IO_PD(208),
- PORT_DATA_IO_PD(209),
- PORT_DATA_IO_PD(210),
- PORT_DATA_IO_PD(211),
- PORT_DATA_IO_PD(212),
- PORT_DATA_IO_PD(213),
- PORT_DATA_IO_PU_PD(214),
- PORT_DATA_IO_PU_PD(215),
- PORT_DATA_IO_PD(216),
- PORT_DATA_IO_PD(217),
- PORT_DATA_O(218),
- PORT_DATA_IO_PD(219),
- PORT_DATA_IO_PD(220),
- PORT_DATA_IO_PU_PD(221),
- PORT_DATA_IO_PU_PD(222),
- PORT_DATA_I_PU_PD(223),
- PORT_DATA_I_PU_PD(224),
-
- PORT_DATA_IO_PU_PD(225),
- PORT_DATA_O(226),
- PORT_DATA_IO_PU_PD(227),
- PORT_DATA_I_PU_PD(228),
- PORT_DATA_I_PD(229),
- PORT_DATA_IO(230),
- PORT_DATA_IO_PU_PD(231),
- PORT_DATA_IO_PU_PD(232),
- PORT_DATA_I_PU_PD(233),
- PORT_DATA_IO_PU_PD(234),
- PORT_DATA_IO_PU_PD(235),
- PORT_DATA_IO_PU_PD(236),
- PORT_DATA_IO_PD(237),
- PORT_DATA_IO_PU_PD(238),
- PORT_DATA_IO_PU_PD(239),
- PORT_DATA_IO_PU_PD(240),
- PORT_DATA_O(241),
- PORT_DATA_I_PD(242),
- PORT_DATA_IO_PU_PD(243),
- PORT_DATA_IO_PU_PD(244),
- PORT_DATA_IO_PU_PD(245),
- PORT_DATA_IO_PU_PD(246),
- PORT_DATA_IO_PU_PD(247),
- PORT_DATA_IO_PU_PD(248),
- PORT_DATA_IO_PU_PD(249),
- PORT_DATA_IO_PU_PD(250),
- PORT_DATA_IO_PU_PD(251),
- PORT_DATA_IO_PU_PD(252),
- PORT_DATA_IO_PU_PD(253),
- PORT_DATA_IO_PU_PD(254),
- PORT_DATA_IO_PU_PD(255),
- PORT_DATA_IO_PU_PD(256),
- PORT_DATA_IO_PU_PD(257),
- PORT_DATA_IO_PU_PD(258),
- PORT_DATA_IO_PU_PD(259),
- PORT_DATA_IO_PU_PD(260),
- PORT_DATA_IO_PU_PD(261),
- PORT_DATA_IO_PU_PD(262),
- PORT_DATA_IO_PU_PD(263),
- PORT_DATA_IO_PU_PD(264),
- PORT_DATA_IO_PU_PD(265),
- PORT_DATA_IO_PU_PD(266),
- PORT_DATA_IO_PU_PD(267),
- PORT_DATA_IO_PU_PD(268),
- PORT_DATA_IO_PU_PD(269),
- PORT_DATA_IO_PU_PD(270),
- PORT_DATA_IO_PU_PD(271),
- PORT_DATA_IO_PU_PD(272),
- PORT_DATA_IO_PU_PD(273),
- PORT_DATA_IO_PU_PD(274),
- PORT_DATA_IO_PU_PD(275),
- PORT_DATA_IO_PU_PD(276),
- PORT_DATA_IO_PU_PD(277),
- PORT_DATA_IO_PU_PD(278),
- PORT_DATA_IO_PU_PD(279),
- PORT_DATA_IO_PU_PD(280),
- PORT_DATA_O(281),
- PORT_DATA_O(282),
- PORT_DATA_I_PU(288),
- PORT_DATA_IO_PU_PD(289),
- PORT_DATA_IO_PU_PD(290),
- PORT_DATA_IO_PU_PD(291),
- PORT_DATA_IO_PU_PD(292),
- PORT_DATA_IO_PU_PD(293),
- PORT_DATA_IO_PU_PD(294),
- PORT_DATA_IO_PU_PD(295),
- PORT_DATA_IO_PU_PD(296),
- PORT_DATA_IO_PU_PD(297),
- PORT_DATA_IO_PU_PD(298),
-
- PORT_DATA_IO_PU_PD(299),
- PORT_DATA_IO_PU_PD(300),
- PORT_DATA_IO_PU_PD(301),
- PORT_DATA_IO_PU_PD(302),
- PORT_DATA_IO_PU_PD(303),
- PORT_DATA_IO_PU_PD(304),
- PORT_DATA_IO_PU_PD(305),
- PORT_DATA_O(306),
- PORT_DATA_O(307),
- PORT_DATA_I_PU(308),
- PORT_DATA_O(309),
-
- /* Table 25-1 (Function 0-7) */
- PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
- PINMUX_DATA(GPI0_MARK, PORT1_FN1),
- PINMUX_DATA(GPI1_MARK, PORT2_FN1),
- PINMUX_DATA(GPI2_MARK, PORT3_FN1),
- PINMUX_DATA(GPI3_MARK, PORT4_FN1),
- PINMUX_DATA(GPI4_MARK, PORT5_FN1),
- PINMUX_DATA(GPI5_MARK, PORT6_FN1),
- PINMUX_DATA(GPI6_MARK, PORT7_FN1),
- PINMUX_DATA(GPI7_MARK, PORT8_FN1),
- PINMUX_DATA(SCIFA7_RXD_MARK, PORT12_FN2),
- PINMUX_DATA(SCIFA7_CTS__MARK, PORT13_FN2),
- PINMUX_DATA(GPO7_MARK, PORT14_FN1), \
- PINMUX_DATA(MFG0_OUT2_MARK, PORT14_FN4),
- PINMUX_DATA(GPO6_MARK, PORT15_FN1), \
- PINMUX_DATA(MFG1_OUT2_MARK, PORT15_FN4),
- PINMUX_DATA(GPO5_MARK, PORT16_FN1), \
- PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), \
- PINMUX_DATA(FSICOSLDT3_MARK, PORT16_FN3), \
- PINMUX_DATA(PORT16_VIO_CKOR_MARK, PORT16_FN4),
- PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
- PINMUX_DATA(SCIFA7_TXD_MARK, PORT18_FN2),
- PINMUX_DATA(SCIFA7_RTS__MARK, PORT19_FN2), \
- PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
- PINMUX_DATA(GPO0_MARK, PORT20_FN1),
- PINMUX_DATA(GPO1_MARK, PORT21_FN1),
- PINMUX_DATA(GPO2_MARK, PORT22_FN1), \
- PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
- PINMUX_DATA(GPO3_MARK, PORT23_FN1), \
- PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
- PINMUX_DATA(GPO4_MARK, PORT24_FN1), \
- PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
- PINMUX_DATA(VINT_MARK, PORT25_FN1),
- PINMUX_DATA(TCKON_MARK, PORT26_FN1),
- PINMUX_DATA(XDVFS1_MARK, PORT27_FN1), \
- PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
- MSEL2CR_MSEL16_1), \
- PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
- MSEL2CR_MSEL18_1), \
- PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
- PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
- PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
- PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
- MSEL2CR_MSEL16_1), \
- PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
- MSEL2CR_MSEL18_1), \
- PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
- PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
- PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),
- PINMUX_DATA(SIM_CLK_MARK, PORT30_FN1), \
- PINMUX_DATA(PORT30_VIO_CKOR_MARK, PORT30_FN4),
- PINMUX_DATA(SIM_D_MARK, PORT31_FN1), \
- PINMUX_DATA(PORT31_IROUT_MARK, PORT31_FN4),
- PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
- PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), \
- PINMUX_DATA(XWUP_MARK, PORT33_FN3),
- PINMUX_DATA(SCIFA4_RTS__MARK, PORT34_FN2),
- PINMUX_DATA(SCIFA4_CTS__MARK, PORT35_FN2),
- PINMUX_DATA(FSIBOBT_MARK, PORT36_FN1), \
- PINMUX_DATA(FSIBIBT_MARK, PORT36_FN2),
- PINMUX_DATA(FSIBOLR_MARK, PORT37_FN1), \
- PINMUX_DATA(FSIBILR_MARK, PORT37_FN2),
- PINMUX_DATA(FSIBOSLD_MARK, PORT38_FN1),
- PINMUX_DATA(FSIBISLD_MARK, PORT39_FN1),
- PINMUX_DATA(VACK_MARK, PORT40_FN1),
- PINMUX_DATA(XTAL1L_MARK, PORT41_FN1),
- PINMUX_DATA(SCIFA0_RTS__MARK, PORT42_FN2), \
- PINMUX_DATA(FSICOSLDT2_MARK, PORT42_FN3),
- PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
- PINMUX_DATA(SCIFA0_CTS__MARK, PORT44_FN2), \
- PINMUX_DATA(FSICOSLDT1_MARK, PORT44_FN3),
- PINMUX_DATA(FSICOBT_MARK, PORT45_FN1), \
- PINMUX_DATA(FSICIBT_MARK, PORT45_FN2), \
- PINMUX_DATA(FSIDOBT_MARK, PORT45_FN3), \
- PINMUX_DATA(FSIDIBT_MARK, PORT45_FN4),
- PINMUX_DATA(FSICOLR_MARK, PORT46_FN1), \
- PINMUX_DATA(FSICILR_MARK, PORT46_FN2), \
- PINMUX_DATA(FSIDOLR_MARK, PORT46_FN3), \
- PINMUX_DATA(FSIDILR_MARK, PORT46_FN4),
- PINMUX_DATA(FSICOSLD_MARK, PORT47_FN1), \
- PINMUX_DATA(PORT47_FSICSPDIF_MARK, PORT47_FN2),
- PINMUX_DATA(FSICISLD_MARK, PORT48_FN1), \
- PINMUX_DATA(FSIDISLD_MARK, PORT48_FN3),
- PINMUX_DATA(FSIACK_MARK, PORT49_FN1), \
- PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2, MSEL4CR_MSEL19_1), \
- PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN4), \
- PINMUX_DATA(FSIAOMC_MARK, PORT49_FN5),
- PINMUX_DATA(FSIAOLR_MARK, PORT50_FN1), \
- PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), \
- PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), \
- PINMUX_DATA(FSIAILR_MARK, PORT50_FN5),
-
- PINMUX_DATA(FSIAOBT_MARK, PORT51_FN1), \
- PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), \
- PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), \
- PINMUX_DATA(FSIAIBT_MARK, PORT51_FN5),
- PINMUX_DATA(FSIAOSLD_MARK, PORT52_FN1), \
- PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
- PINMUX_DATA(FSIASPDIF_MARK, PORT53_FN1), \
- PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2, MSEL4CR_MSEL19_1), \
- PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), \
- PINMUX_DATA(FSIBSPDIF_MARK, PORT53_FN5), \
- PINMUX_DATA(PORT53_FSICSPDIF_MARK, PORT53_FN6),
- PINMUX_DATA(FSIBCK_MARK, PORT54_FN1), \
- PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2, MSEL4CR_MSEL19_1), \
- PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), \
- PINMUX_DATA(FSIBOMC_MARK, PORT54_FN5), \
- PINMUX_DATA(FSICCK_MARK, PORT54_FN6), \
- PINMUX_DATA(FSICOMC_MARK, PORT54_FN7),
- PINMUX_DATA(FSIAISLD_MARK, PORT55_FN1), \
- PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
- PINMUX_DATA(A0_MARK, PORT57_FN1), \
- PINMUX_DATA(BS__MARK, PORT57_FN2),
- PINMUX_DATA(A12_MARK, PORT58_FN1), \
- PINMUX_DATA(PORT58_KEYOUT7_MARK, PORT58_FN2), \
- PINMUX_DATA(TPU4TO2_MARK, PORT58_FN4),
- PINMUX_DATA(A13_MARK, PORT59_FN1), \
- PINMUX_DATA(PORT59_KEYOUT6_MARK, PORT59_FN2), \
- PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
- PINMUX_DATA(A14_MARK, PORT60_FN1), \
- PINMUX_DATA(KEYOUT5_MARK, PORT60_FN2),
- PINMUX_DATA(A15_MARK, PORT61_FN1), \
- PINMUX_DATA(KEYOUT4_MARK, PORT61_FN2),
- PINMUX_DATA(A16_MARK, PORT62_FN1), \
- PINMUX_DATA(KEYOUT3_MARK, PORT62_FN2), \
- PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A17_MARK, PORT63_FN1), \
- PINMUX_DATA(KEYOUT2_MARK, PORT63_FN2), \
- PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A18_MARK, PORT64_FN1), \
- PINMUX_DATA(KEYOUT1_MARK, PORT64_FN2), \
- PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A19_MARK, PORT65_FN1), \
- PINMUX_DATA(KEYOUT0_MARK, PORT65_FN2), \
- PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A20_MARK, PORT66_FN1), \
- PINMUX_DATA(KEYIN0_MARK, PORT66_FN2), \
- PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A21_MARK, PORT67_FN1), \
- PINMUX_DATA(KEYIN1_MARK, PORT67_FN2), \
- PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A22_MARK, PORT68_FN1), \
- PINMUX_DATA(KEYIN2_MARK, PORT68_FN2), \
- PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A23_MARK, PORT69_FN1), \
- PINMUX_DATA(KEYIN3_MARK, PORT69_FN2), \
- PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A24_MARK, PORT70_FN1), \
- PINMUX_DATA(KEYIN4_MARK, PORT70_FN2), \
- PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A25_MARK, PORT71_FN1), \
- PINMUX_DATA(KEYIN5_MARK, PORT71_FN2), \
- PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN4, MSEL3CR_MSEL11_0),
- PINMUX_DATA(A26_MARK, PORT72_FN1), \
- PINMUX_DATA(KEYIN6_MARK, PORT72_FN2),
- PINMUX_DATA(KEYIN7_MARK, PORT73_FN2),
- PINMUX_DATA(D0_NAF0_MARK, PORT74_FN1),
- PINMUX_DATA(D1_NAF1_MARK, PORT75_FN1),
- PINMUX_DATA(D2_NAF2_MARK, PORT76_FN1),
- PINMUX_DATA(D3_NAF3_MARK, PORT77_FN1),
- PINMUX_DATA(D4_NAF4_MARK, PORT78_FN1),
- PINMUX_DATA(D5_NAF5_MARK, PORT79_FN1),
- PINMUX_DATA(D6_NAF6_MARK, PORT80_FN1),
- PINMUX_DATA(D7_NAF7_MARK, PORT81_FN1),
- PINMUX_DATA(D8_NAF8_MARK, PORT82_FN1),
- PINMUX_DATA(D9_NAF9_MARK, PORT83_FN1),
- PINMUX_DATA(D10_NAF10_MARK, PORT84_FN1),
- PINMUX_DATA(D11_NAF11_MARK, PORT85_FN1),
- PINMUX_DATA(D12_NAF12_MARK, PORT86_FN1),
- PINMUX_DATA(D13_NAF13_MARK, PORT87_FN1),
- PINMUX_DATA(D14_NAF14_MARK, PORT88_FN1),
- PINMUX_DATA(D15_NAF15_MARK, PORT89_FN1),
- PINMUX_DATA(CS4__MARK, PORT90_FN1),
- PINMUX_DATA(CS5A__MARK, PORT91_FN1), \
- PINMUX_DATA(PORT91_RDWR_MARK, PORT91_FN2),
- PINMUX_DATA(CS5B__MARK, PORT92_FN1), \
- PINMUX_DATA(FCE1__MARK, PORT92_FN2),
- PINMUX_DATA(CS6B__MARK, PORT93_FN1), \
- PINMUX_DATA(DACK0_MARK, PORT93_FN4),
- PINMUX_DATA(FCE0__MARK, PORT94_FN1), \
- PINMUX_DATA(CS6A__MARK, PORT94_FN2),
- PINMUX_DATA(WAIT__MARK, PORT95_FN1), \
- PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
- PINMUX_DATA(RD__FSC_MARK, PORT96_FN1),
- PINMUX_DATA(WE0__FWE_MARK, PORT97_FN1), \
- PINMUX_DATA(RDWR_FWE_MARK, PORT97_FN2),
- PINMUX_DATA(WE1__MARK, PORT98_FN1),
- PINMUX_DATA(FRB_MARK, PORT99_FN1),
- PINMUX_DATA(CKO_MARK, PORT100_FN1),
- PINMUX_DATA(NBRSTOUT__MARK, PORT101_FN1),
- PINMUX_DATA(NBRST__MARK, PORT102_FN1),
- PINMUX_DATA(BBIF2_TXD_MARK, PORT103_FN3),
- PINMUX_DATA(BBIF2_RXD_MARK, PORT104_FN3),
- PINMUX_DATA(BBIF2_SYNC_MARK, PORT105_FN3),
- PINMUX_DATA(BBIF2_SCK_MARK, PORT106_FN3),
- PINMUX_DATA(SCIFA3_CTS__MARK, PORT107_FN3), \
- PINMUX_DATA(MFG3_IN2_MARK, PORT107_FN4),
- PINMUX_DATA(SCIFA3_RXD_MARK, PORT108_FN3), \
- PINMUX_DATA(MFG3_IN1_MARK, PORT108_FN4),
- PINMUX_DATA(BBIF1_SS2_MARK, PORT109_FN2), \
- PINMUX_DATA(SCIFA3_RTS__MARK, PORT109_FN3), \
- PINMUX_DATA(MFG3_OUT1_MARK, PORT109_FN4),
- PINMUX_DATA(SCIFA3_TXD_MARK, PORT110_FN3),
- PINMUX_DATA(HSI_RX_DATA_MARK, PORT111_FN1), \
- PINMUX_DATA(BBIF1_RXD_MARK, PORT111_FN3),
- PINMUX_DATA(HSI_TX_WAKE_MARK, PORT112_FN1), \
- PINMUX_DATA(BBIF1_TSCK_MARK, PORT112_FN3),
- PINMUX_DATA(HSI_TX_DATA_MARK, PORT113_FN1), \
- PINMUX_DATA(BBIF1_TSYNC_MARK, PORT113_FN3),
- PINMUX_DATA(HSI_TX_READY_MARK, PORT114_FN1), \
- PINMUX_DATA(BBIF1_TXD_MARK, PORT114_FN3),
- PINMUX_DATA(HSI_RX_READY_MARK, PORT115_FN1), \
- PINMUX_DATA(BBIF1_RSCK_MARK, PORT115_FN3), \
- PINMUX_DATA(PORT115_I2C_SCL2_MARK, PORT115_FN5, MSEL2CR_MSEL17_1), \
- PINMUX_DATA(PORT115_I2C_SCL3_MARK, PORT115_FN6, MSEL2CR_MSEL19_1),
- PINMUX_DATA(HSI_RX_WAKE_MARK, PORT116_FN1), \
- PINMUX_DATA(BBIF1_RSYNC_MARK, PORT116_FN3), \
- PINMUX_DATA(PORT116_I2C_SDA2_MARK, PORT116_FN5, MSEL2CR_MSEL17_1), \
- PINMUX_DATA(PORT116_I2C_SDA3_MARK, PORT116_FN6, MSEL2CR_MSEL19_1),
- PINMUX_DATA(HSI_RX_FLAG_MARK, PORT117_FN1), \
- PINMUX_DATA(BBIF1_SS1_MARK, PORT117_FN2), \
- PINMUX_DATA(BBIF1_FLOW_MARK, PORT117_FN3),
- PINMUX_DATA(HSI_TX_FLAG_MARK, PORT118_FN1),
- PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), \
- PINMUX_DATA(PORT128_LCD2VSYN_MARK, PORT128_FN4, MSEL3CR_MSEL2_0), \
- PINMUX_DATA(VIO2_VD_MARK, PORT128_FN6, MSEL4CR_MSEL27_0), \
- PINMUX_DATA(LCD2D0_MARK, PORT128_FN7),
-
- PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), \
- PINMUX_DATA(PORT129_LCD2HSYN_MARK, PORT129_FN4), \
- PINMUX_DATA(PORT129_LCD2CS__MARK, PORT129_FN5), \
- PINMUX_DATA(VIO2_HD_MARK, PORT129_FN6, MSEL4CR_MSEL27_0), \
- PINMUX_DATA(LCD2D1_MARK, PORT129_FN7),
- PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), \
- PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3, MSEL4CR_MSEL11_0,
- MSEL4CR_MSEL10_1), \
- PINMUX_DATA(LCD2D10_MARK, PORT130_FN7),
- PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), \
- PINMUX_DATA(PORT131_KEYOUT6_MARK, PORT131_FN2), \
- PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), \
- PINMUX_DATA(PORT131_KEYOUT11_MARK, PORT131_FN4), \
- PINMUX_DATA(LCD2D11_MARK, PORT131_FN7),
- PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), \
- PINMUX_DATA(PORT132_KEYOUT7_MARK, PORT132_FN2), \
- PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), \
- PINMUX_DATA(PORT132_KEYOUT10_MARK, PORT132_FN4), \
- PINMUX_DATA(LCD2D12_MARK, PORT132_FN7),
- PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), \
- PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT133_FN3, MSEL4CR_MSEL11_0), \
- PINMUX_DATA(LCD2D13_MARK, PORT133_FN7),
- PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), \
- PINMUX_DATA(MSIOF2_TXD_MARK, PORT134_FN3, MSEL4CR_MSEL11_0), \
- PINMUX_DATA(LCD2D14_MARK, PORT134_FN7),
- PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), \
- PINMUX_DATA(MSIOF2_TSCK_MARK, PORT135_FN3, MSEL4CR_MSEL11_0), \
- PINMUX_DATA(LCD2D15_MARK, PORT135_FN7),
- PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), \
- PINMUX_DATA(PORT136_KEYOUT8_MARK, PORT136_FN2), \
- PINMUX_DATA(LCD2D16_MARK, PORT136_FN7),
- PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), \
- PINMUX_DATA(PORT137_KEYOUT9_MARK, PORT137_FN2), \
- PINMUX_DATA(LCD2D17_MARK, PORT137_FN7),
- PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), \
- PINMUX_DATA(PORT138_KEYOUT8_MARK, PORT138_FN2), \
- PINMUX_DATA(VIO2_D0_MARK, PORT138_FN6), \
- PINMUX_DATA(LCD2D6_MARK, PORT138_FN7),
- PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), \
- PINMUX_DATA(PORT139_KEYOUT9_MARK, PORT139_FN2), \
- PINMUX_DATA(VIO2_D1_MARK, PORT139_FN6), \
- PINMUX_DATA(LCD2D7_MARK, PORT139_FN7),
- PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), \
- PINMUX_DATA(TPU0TO2_MARK, PORT140_FN4), \
- PINMUX_DATA(VIO2_D2_MARK, PORT140_FN6), \
- PINMUX_DATA(LCD2D8_MARK, PORT140_FN7),
- PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), \
- PINMUX_DATA(TPU0TO3_MARK, PORT141_FN4), \
- PINMUX_DATA(VIO2_D3_MARK, PORT141_FN6), \
- PINMUX_DATA(LCD2D9_MARK, PORT141_FN7),
- PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), \
- PINMUX_DATA(PORT142_KEYOUT10_MARK, PORT142_FN2), \
- PINMUX_DATA(VIO2_D4_MARK, PORT142_FN6), \
- PINMUX_DATA(LCD2D2_MARK, PORT142_FN7),
- PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), \
- PINMUX_DATA(PORT143_KEYOUT11_MARK, PORT143_FN2), \
- PINMUX_DATA(PORT143_KEYOUT6_MARK, PORT143_FN3), \
- PINMUX_DATA(VIO2_D5_MARK, PORT143_FN6), \
- PINMUX_DATA(LCD2D3_MARK, PORT143_FN7),
- PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), \
- PINMUX_DATA(PORT144_KEYOUT7_MARK, PORT144_FN2), \
- PINMUX_DATA(VIO2_D6_MARK, PORT144_FN6), \
- PINMUX_DATA(LCD2D4_MARK, PORT144_FN7),
- PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), \
- PINMUX_DATA(TPU1TO3_MARK, PORT145_FN3), \
- PINMUX_DATA(PORT145_LCD2DISP_MARK, PORT145_FN4), \
- PINMUX_DATA(PORT145_LCD2RS_MARK, PORT145_FN5), \
- PINMUX_DATA(VIO2_D7_MARK, PORT145_FN6), \
- PINMUX_DATA(LCD2D5_MARK, PORT145_FN7),
- PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), \
- PINMUX_DATA(LCD2DCK_MARK, PORT146_FN4), \
- PINMUX_DATA(PORT146_LCD2WR__MARK, PORT146_FN5), \
- PINMUX_DATA(VIO2_CLK_MARK, PORT146_FN6, MSEL4CR_MSEL27_0), \
- PINMUX_DATA(LCD2D18_MARK, PORT146_FN7),
- PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), \
- PINMUX_DATA(LCD2RD__MARK, PORT147_FN4), \
- PINMUX_DATA(VIO2_FIELD_MARK, PORT147_FN6, MSEL4CR_MSEL27_0), \
- PINMUX_DATA(LCD2D19_MARK, PORT147_FN7),
- PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
- PINMUX_DATA(A27_MARK, PORT149_FN1), \
- PINMUX_DATA(PORT149_RDWR_MARK, PORT149_FN2), \
- PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), \
- PINMUX_DATA(PORT149_KEYOUT9_MARK, PORT149_FN4),
- PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN3),
- PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN4), \
- PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN5),
- PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN4), \
- PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN5),
- PINMUX_DATA(TPU1TO2_MARK, PORT153_FN3), \
- PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN4), \
- PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN5),
- PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2, MSEL3CR_MSEL9_0), \
- PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN5),
- PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2, MSEL3CR_MSEL9_0), \
- PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN5),
- PINMUX_DATA(SCIFA2_RTS1__MARK, PORT156_FN2, MSEL3CR_MSEL9_0), \
- PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN5),
- PINMUX_DATA(SCIFA2_CTS1__MARK, PORT157_FN2, MSEL3CR_MSEL9_0), \
- PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN5, MSEL4CR_MSEL11_0,
- MSEL4CR_MSEL10_0),
- PINMUX_DATA(DINT__MARK, PORT158_FN1), \
- PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2, MSEL3CR_MSEL9_0), \
- PINMUX_DATA(TS_SCK3_MARK, PORT158_FN4),
- PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1, MSEL4CR_MSEL22_0), \
- PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2, MSEL4CR_MSEL21_1), \
- PINMUX_DATA(NMI_MARK, PORT159_FN3),
- PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1, MSEL4CR_MSEL22_0), \
- PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2, MSEL4CR_MSEL21_1),
- PINMUX_DATA(PORT161_SCIFB_CTS__MARK, PORT161_FN1, MSEL4CR_MSEL22_0), \
- PINMUX_DATA(PORT161_SCIFA5_CTS__MARK, PORT161_FN2, MSEL4CR_MSEL21_1),
- PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1, MSEL4CR_MSEL22_0), \
- PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2, MSEL4CR_MSEL21_1),
- PINMUX_DATA(PORT163_SCIFB_RTS__MARK, PORT163_FN1, MSEL4CR_MSEL22_0), \
- PINMUX_DATA(PORT163_SCIFA5_RTS__MARK, PORT163_FN2, MSEL4CR_MSEL21_1), \
- PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
- PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
- PINMUX_DATA(LCDD1_MARK, PORT193_FN1), \
- PINMUX_DATA(PORT193_SCIFA5_CTS__MARK, PORT193_FN3, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_1), \
- PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN5),
- PINMUX_DATA(LCDD2_MARK, PORT194_FN1), \
- PINMUX_DATA(PORT194_SCIFA5_RTS__MARK, PORT194_FN3, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_1), \
- PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN5),
- PINMUX_DATA(LCDD3_MARK, PORT195_FN1), \
- PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_1), \
- PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN5),
- PINMUX_DATA(LCDD4_MARK, PORT196_FN1), \
- PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_1),
- PINMUX_DATA(LCDD5_MARK, PORT197_FN1), \
- PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_1), \
- PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN5), \
- PINMUX_DATA(TPU2TO1_MARK, PORT197_FN7),
- PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
- PINMUX_DATA(LCDD7_MARK, PORT199_FN1), \
- PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), \
- PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN5),
- PINMUX_DATA(LCDD8_MARK, PORT200_FN1), \
- PINMUX_DATA(D16_MARK, PORT200_FN6),
- PINMUX_DATA(LCDD9_MARK, PORT201_FN1), \
- PINMUX_DATA(D17_MARK, PORT201_FN6),
- PINMUX_DATA(LCDD10_MARK, PORT202_FN1), \
- PINMUX_DATA(D18_MARK, PORT202_FN6),
- PINMUX_DATA(LCDD11_MARK, PORT203_FN1), \
- PINMUX_DATA(D19_MARK, PORT203_FN6),
- PINMUX_DATA(LCDD12_MARK, PORT204_FN1), \
- PINMUX_DATA(D20_MARK, PORT204_FN6),
- PINMUX_DATA(LCDD13_MARK, PORT205_FN1), \
- PINMUX_DATA(D21_MARK, PORT205_FN6),
- PINMUX_DATA(LCDD14_MARK, PORT206_FN1), \
- PINMUX_DATA(D22_MARK, PORT206_FN6),
- PINMUX_DATA(LCDD15_MARK, PORT207_FN1), \
- PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(D23_MARK, PORT207_FN6),
- PINMUX_DATA(LCDD16_MARK, PORT208_FN1), \
- PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(D24_MARK, PORT208_FN6),
- PINMUX_DATA(LCDD17_MARK, PORT209_FN1), \
- PINMUX_DATA(D25_MARK, PORT209_FN6),
- PINMUX_DATA(LCDD18_MARK, PORT210_FN1), \
- PINMUX_DATA(DREQ2_MARK, PORT210_FN2), \
- PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(D26_MARK, PORT210_FN6),
- PINMUX_DATA(LCDD19_MARK, PORT211_FN1), \
- PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(D27_MARK, PORT211_FN6),
- PINMUX_DATA(LCDD20_MARK, PORT212_FN1), \
- PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), \
- PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(D28_MARK, PORT212_FN6),
- PINMUX_DATA(LCDD21_MARK, PORT213_FN1), \
- PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), \
- PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(D29_MARK, PORT213_FN6),
- PINMUX_DATA(LCDD22_MARK, PORT214_FN1), \
- PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), \
- PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(D30_MARK, PORT214_FN6),
- PINMUX_DATA(LCDD23_MARK, PORT215_FN1), \
- PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), \
- PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(D31_MARK, PORT215_FN6),
- PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), \
- PINMUX_DATA(LCDWR__MARK, PORT216_FN2),
- PINMUX_DATA(LCDRD__MARK, PORT217_FN1), \
- PINMUX_DATA(DACK2_MARK, PORT217_FN2), \
- PINMUX_DATA(PORT217_LCD2RS_MARK, PORT217_FN3), \
- PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(VIO2_FIELD3_MARK, PORT217_FN6, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_1), \
- PINMUX_DATA(PORT217_LCD2DISP_MARK, PORT217_FN7),
- PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), \
- PINMUX_DATA(LCDCS__MARK, PORT218_FN2), \
- PINMUX_DATA(LCDCS2__MARK, PORT218_FN3), \
- PINMUX_DATA(DACK3_MARK, PORT218_FN4), \
- PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
- PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), \
- PINMUX_DATA(LCDRS_MARK, PORT219_FN2), \
- PINMUX_DATA(PORT219_LCD2WR__MARK, PORT219_FN3), \
- PINMUX_DATA(DREQ3_MARK, PORT219_FN4), \
- PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(VIO2_CLK3_MARK, PORT219_FN6, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_1), \
- PINMUX_DATA(LCD2DCK_2_MARK, PORT219_FN7),
- PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), \
- PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
- PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), \
- PINMUX_DATA(DREQ1_MARK, PORT221_FN2), \
- PINMUX_DATA(PORT221_LCD2CS__MARK, PORT221_FN3), \
- PINMUX_DATA(PWEN_MARK, PORT221_FN4), \
- PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(VIO2_HD3_MARK, PORT221_FN6, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_1), \
- PINMUX_DATA(PORT221_LCD2HSYN_MARK, PORT221_FN7),
- PINMUX_DATA(LCDDON_MARK, PORT222_FN1), \
- PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), \
- PINMUX_DATA(DACK1_MARK, PORT222_FN3), \
- PINMUX_DATA(OVCN_MARK, PORT222_FN4), \
- PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5, MSEL3CR_MSEL11_1), \
- PINMUX_DATA(VIO2_VD3_MARK, PORT222_FN6, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_1), \
- PINMUX_DATA(PORT222_LCD2VSYN_MARK, PORT222_FN7, MSEL3CR_MSEL2_1),
-
- PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN2), \
- PINMUX_DATA(OVCN2_MARK, PORT225_FN4),
- PINMUX_DATA(EXTLP_MARK, PORT226_FN1), \
- PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), \
- PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN5),
- PINMUX_DATA(SCIFA1_RTS__MARK, PORT227_FN2), \
- PINMUX_DATA(IDIN_MARK, PORT227_FN4),
- PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN2),
- PINMUX_DATA(SCIFA1_CTS__MARK, PORT229_FN2), \
- PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN3),
- PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), \
- PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2, MSEL3CR_MSEL9_1),
- PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), \
- PINMUX_DATA(SCIFA2_CTS2__MARK, PORT231_FN2, MSEL3CR_MSEL9_1),
- PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), \
- PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2, MSEL3CR_MSEL9_1),
- PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), \
- PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2, MSEL3CR_MSEL9_1),
- PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), \
- PINMUX_DATA(SCIFA2_RTS2__MARK, PORT234_FN2, MSEL3CR_MSEL9_1), \
- PINMUX_DATA(VIO2_CLK2_MARK, PORT234_FN6, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_0), \
- PINMUX_DATA(LCD2D20_MARK, PORT234_FN7),
- PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), \
- PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), \
- PINMUX_DATA(VIO2_VD2_MARK, PORT235_FN6, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_0), \
- PINMUX_DATA(LCD2D21_MARK, PORT235_FN7),
- PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), \
- PINMUX_DATA(PORT236_I2C_SDA2_MARK, PORT236_FN2, MSEL2CR_MSEL17_0,
- MSEL2CR_MSEL16_0),
- PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), \
- PINMUX_DATA(PORT237_I2C_SCL2_MARK, PORT237_FN2, MSEL2CR_MSEL17_0,
- MSEL2CR_MSEL16_0),
- PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), \
- PINMUX_DATA(VIO2_FIELD2_MARK, PORT238_FN6, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_0), \
- PINMUX_DATA(LCD2D22_MARK, PORT238_FN7),
- PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), \
- PINMUX_DATA(VIO2_HD2_MARK, PORT239_FN6, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_0), \
- PINMUX_DATA(LCD2D23_MARK, PORT239_FN7),
- PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
- PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1, MSEL4CR_MSEL19_0), \
- PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), \
- PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), \
- PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
- PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1, MSEL4CR_MSEL19_0), \
- PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN3),
- PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1, MSEL4CR_MSEL19_0), \
- PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
- PINMUX_DATA(PORT244_SCIFA5_CTS__MARK, PORT244_FN1, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_0), \
- PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), \
- PINMUX_DATA(PORT244_SCIFB_CTS__MARK, PORT244_FN3, MSEL4CR_MSEL22_1), \
- PINMUX_DATA(MSIOF2R_RXD_MARK, PORT244_FN7, MSEL4CR_MSEL11_1),
- PINMUX_DATA(PORT245_SCIFA5_RTS__MARK, PORT245_FN1, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_0), \
- PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), \
- PINMUX_DATA(PORT245_SCIFB_RTS__MARK, PORT245_FN3, MSEL4CR_MSEL22_1), \
- PINMUX_DATA(MSIOF2R_TXD_MARK, PORT245_FN7, MSEL4CR_MSEL11_1),
- PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_0), \
- PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), \
- PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3, MSEL4CR_MSEL22_1), \
- PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
- PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_0), \
- PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), \
- PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3, MSEL4CR_MSEL22_1), \
- PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
- PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1, MSEL4CR_MSEL21_0,
- MSEL4CR_MSEL20_0), \
- PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), \
- PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3, MSEL4CR_MSEL22_1), \
- PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), \
- PINMUX_DATA(PORT248_I2C_SCL3_MARK, PORT248_FN5, MSEL2CR_MSEL19_0,
- MSEL2CR_MSEL18_0), \
- PINMUX_DATA(MSIOF2R_TSCK_MARK, PORT248_FN7, MSEL4CR_MSEL11_1),
- PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), \
- PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), \
- PINMUX_DATA(PORT249_I2C_SDA3_MARK, PORT249_FN5, MSEL2CR_MSEL19_0,
- MSEL2CR_MSEL18_0), \
- PINMUX_DATA(MSIOF2R_TSYNC_MARK, PORT249_FN7, MSEL4CR_MSEL11_1),
- PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
- PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
- PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
- PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
- PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
- PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
- PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
- PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
- PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
- PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), \
- PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
- PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), \
- PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
- PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), \
- PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
- PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), \
- PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
- PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
- PINMUX_DATA(SDHICLK2_MARK, PORT264_FN1),
- PINMUX_DATA(SDHID2_0_MARK, PORT265_FN1), \
- PINMUX_DATA(TS_SPSYNC4_MARK, PORT265_FN3),
- PINMUX_DATA(SDHID2_1_MARK, PORT266_FN1), \
- PINMUX_DATA(TS_SDAT4_MARK, PORT266_FN3),
- PINMUX_DATA(SDHID2_2_MARK, PORT267_FN1), \
- PINMUX_DATA(TS_SDEN4_MARK, PORT267_FN3),
- PINMUX_DATA(SDHID2_3_MARK, PORT268_FN1), \
- PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3),
- PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1),
- PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU,
- MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU,
- MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU,
- MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU,
- MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU,
- MSEL4CR_MSEL15_0), \
- PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3),
- PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU,
- MSEL4CR_MSEL15_0), \
- PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3),
- PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU,
- MSEL4CR_MSEL15_0), \
- PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3),
- PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU,
- MSEL4CR_MSEL15_0), \
- PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3),
- PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU,
- MSEL4CR_MSEL15_0),
- PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \
- PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2),
- PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1),
- PINMUX_DATA(MCP_CKO_MARK, PORT289_FN1), \
- PINMUX_DATA(MMCCLK1_MARK, PORT289_FN2, MSEL4CR_MSEL15_1),
- PINMUX_DATA(MCP_D15_MCP_NAF15_MARK, PORT290_FN1),
- PINMUX_DATA(MCP_D14_MCP_NAF14_MARK, PORT291_FN1),
- PINMUX_DATA(MCP_D13_MCP_NAF13_MARK, PORT292_FN1),
- PINMUX_DATA(MCP_D12_MCP_NAF12_MARK, PORT293_FN1),
- PINMUX_DATA(MCP_D11_MCP_NAF11_MARK, PORT294_FN1),
- PINMUX_DATA(MCP_D10_MCP_NAF10_MARK, PORT295_FN1),
- PINMUX_DATA(MCP_D9_MCP_NAF9_MARK, PORT296_FN1),
- PINMUX_DATA(MCP_D8_MCP_NAF8_MARK, PORT297_FN1), \
- PINMUX_DATA(MMCCMD1_MARK, PORT297_FN2, MSEL4CR_MSEL15_1),
- PINMUX_DATA(MCP_D7_MCP_NAF7_MARK, PORT298_FN1), \
- PINMUX_DATA(MMCD1_7_MARK, PORT298_FN2, MSEL4CR_MSEL15_1),
-
- PINMUX_DATA(MCP_D6_MCP_NAF6_MARK, PORT299_FN1), \
- PINMUX_DATA(MMCD1_6_MARK, PORT299_FN2, MSEL4CR_MSEL15_1),
- PINMUX_DATA(MCP_D5_MCP_NAF5_MARK, PORT300_FN1), \
- PINMUX_DATA(MMCD1_5_MARK, PORT300_FN2, MSEL4CR_MSEL15_1),
- PINMUX_DATA(MCP_D4_MCP_NAF4_MARK, PORT301_FN1), \
- PINMUX_DATA(MMCD1_4_MARK, PORT301_FN2, MSEL4CR_MSEL15_1),
- PINMUX_DATA(MCP_D3_MCP_NAF3_MARK, PORT302_FN1), \
- PINMUX_DATA(MMCD1_3_MARK, PORT302_FN2, MSEL4CR_MSEL15_1),
- PINMUX_DATA(MCP_D2_MCP_NAF2_MARK, PORT303_FN1), \
- PINMUX_DATA(MMCD1_2_MARK, PORT303_FN2, MSEL4CR_MSEL15_1),
- PINMUX_DATA(MCP_D1_MCP_NAF1_MARK, PORT304_FN1), \
- PINMUX_DATA(MMCD1_1_MARK, PORT304_FN2, MSEL4CR_MSEL15_1),
- PINMUX_DATA(MCP_D0_MCP_NAF0_MARK, PORT305_FN1), \
- PINMUX_DATA(MMCD1_0_MARK, PORT305_FN2, MSEL4CR_MSEL15_1),
- PINMUX_DATA(MCP_NBRSTOUT__MARK, PORT306_FN1),
- PINMUX_DATA(MCP_WE0__MCP_FWE_MARK, PORT309_FN1), \
- PINMUX_DATA(MCP_RDWR_MCP_FWE_MARK, PORT309_FN2),
-
- /* MSEL2 special cases */
- PINMUX_DATA(TSIF2_TS_XX1_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
- MSEL2CR_MSEL12_0),
- PINMUX_DATA(TSIF2_TS_XX2_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
- MSEL2CR_MSEL12_1),
- PINMUX_DATA(TSIF2_TS_XX3_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
- MSEL2CR_MSEL12_0),
- PINMUX_DATA(TSIF2_TS_XX4_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
- MSEL2CR_MSEL12_1),
- PINMUX_DATA(TSIF2_TS_XX5_MARK, MSEL2CR_MSEL14_1, MSEL2CR_MSEL13_0,
- MSEL2CR_MSEL12_0),
- PINMUX_DATA(TSIF1_TS_XX1_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
- MSEL2CR_MSEL9_0),
- PINMUX_DATA(TSIF1_TS_XX2_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
- MSEL2CR_MSEL9_1),
- PINMUX_DATA(TSIF1_TS_XX3_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
- MSEL2CR_MSEL9_0),
- PINMUX_DATA(TSIF1_TS_XX4_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
- MSEL2CR_MSEL9_1),
- PINMUX_DATA(TSIF1_TS_XX5_MARK, MSEL2CR_MSEL11_1, MSEL2CR_MSEL10_0,
- MSEL2CR_MSEL9_0),
- PINMUX_DATA(TSIF0_TS_XX1_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
- MSEL2CR_MSEL6_0),
- PINMUX_DATA(TSIF0_TS_XX2_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
- MSEL2CR_MSEL6_1),
- PINMUX_DATA(TSIF0_TS_XX3_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
- MSEL2CR_MSEL6_0),
- PINMUX_DATA(TSIF0_TS_XX4_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
- MSEL2CR_MSEL6_1),
- PINMUX_DATA(TSIF0_TS_XX5_MARK, MSEL2CR_MSEL8_1, MSEL2CR_MSEL7_0,
- MSEL2CR_MSEL6_0),
- PINMUX_DATA(MST1_TS_XX1_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
- MSEL2CR_MSEL3_0),
- PINMUX_DATA(MST1_TS_XX2_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
- MSEL2CR_MSEL3_1),
- PINMUX_DATA(MST1_TS_XX3_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
- MSEL2CR_MSEL3_0),
- PINMUX_DATA(MST1_TS_XX4_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
- MSEL2CR_MSEL3_1),
- PINMUX_DATA(MST1_TS_XX5_MARK, MSEL2CR_MSEL5_1, MSEL2CR_MSEL4_0,
- MSEL2CR_MSEL3_0),
- PINMUX_DATA(MST0_TS_XX1_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
- MSEL2CR_MSEL0_0),
- PINMUX_DATA(MST0_TS_XX2_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
- MSEL2CR_MSEL0_1),
- PINMUX_DATA(MST0_TS_XX3_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
- MSEL2CR_MSEL0_0),
- PINMUX_DATA(MST0_TS_XX4_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
- MSEL2CR_MSEL0_1),
- PINMUX_DATA(MST0_TS_XX5_MARK, MSEL2CR_MSEL2_1, MSEL2CR_MSEL1_0,
- MSEL2CR_MSEL0_0),
-
- /* MSEL3 special cases */
- PINMUX_DATA(SDHI0_VCCQ_MC0_ON_MARK, MSEL3CR_MSEL28_1),
- PINMUX_DATA(SDHI0_VCCQ_MC0_OFF_MARK, MSEL3CR_MSEL28_0),
- PINMUX_DATA(DEBUG_MON_VIO_MARK, MSEL3CR_MSEL15_0),
- PINMUX_DATA(DEBUG_MON_LCDD_MARK, MSEL3CR_MSEL15_1),
- PINMUX_DATA(LCDC_LCDC0_MARK, MSEL3CR_MSEL6_0),
- PINMUX_DATA(LCDC_LCDC1_MARK, MSEL3CR_MSEL6_1),
-
- /* MSEL4 special cases */
- PINMUX_DATA(IRQ9_MEM_INT_MARK, MSEL4CR_MSEL29_0),
- PINMUX_DATA(IRQ9_MCP_INT_MARK, MSEL4CR_MSEL29_1),
- PINMUX_DATA(A11_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_0),
- PINMUX_DATA(KEYOUT8_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_1),
- PINMUX_DATA(TPU4TO3_MARK, MSEL4CR_MSEL13_1, MSEL4CR_MSEL12_0),
- PINMUX_DATA(RESETA_N_PU_ON_MARK, MSEL4CR_MSEL4_0),
- PINMUX_DATA(RESETA_N_PU_OFF_MARK, MSEL4CR_MSEL4_1),
- PINMUX_DATA(EDBGREQ_PD_MARK, MSEL4CR_MSEL1_0),
- PINMUX_DATA(EDBGREQ_PU_MARK, MSEL4CR_MSEL1_1),
-
- /* Functions with pull-ups */
- PINMUX_DATA(KEYIN0_PU_MARK, PORT66_FN2, PORT66_IN_PU),
- PINMUX_DATA(KEYIN1_PU_MARK, PORT67_FN2, PORT67_IN_PU),
- PINMUX_DATA(KEYIN2_PU_MARK, PORT68_FN2, PORT68_IN_PU),
- PINMUX_DATA(KEYIN3_PU_MARK, PORT69_FN2, PORT69_IN_PU),
- PINMUX_DATA(KEYIN4_PU_MARK, PORT70_FN2, PORT70_IN_PU),
- PINMUX_DATA(KEYIN5_PU_MARK, PORT71_FN2, PORT71_IN_PU),
- PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
- PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
-
- PINMUX_DATA(SDHICD0_PU_MARK, PORT251_FN1, PORT251_IN_PU),
- PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU),
- PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU),
- PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU),
- PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU),
- PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU),
- PINMUX_DATA(SDHIWP0_PU_MARK, PORT257_FN1, PORT256_IN_PU),
- PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU),
- PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU),
- PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU),
- PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU),
- PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU),
- PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU),
- PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU),
- PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU),
- PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU),
- PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU),
-
- PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
- MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
- MSEL4CR_MSEL15_1),
-
- PINMUX_DATA(MMCD0_0_PU_MARK,
- PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_1_PU_MARK,
- PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_2_PU_MARK,
- PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_3_PU_MARK,
- PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_4_PU_MARK,
- PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_5_PU_MARK,
- PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_6_PU_MARK,
- PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_7_PU_MARK,
- PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
-
- PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
- PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
- PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
- PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
- PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
-};
-
-static struct pinmux_gpio pinmux_gpios[] = {
- GPIO_PORT_ALL(),
-
- /* Table 25-1 (Functions 0-7) */
- GPIO_FN(VBUS_0),
- GPIO_FN(GPI0),
- GPIO_FN(GPI1),
- GPIO_FN(GPI2),
- GPIO_FN(GPI3),
- GPIO_FN(GPI4),
- GPIO_FN(GPI5),
- GPIO_FN(GPI6),
- GPIO_FN(GPI7),
- GPIO_FN(SCIFA7_RXD),
- GPIO_FN(SCIFA7_CTS_),
- GPIO_FN(GPO7), \
- GPIO_FN(MFG0_OUT2),
- GPIO_FN(GPO6), \
- GPIO_FN(MFG1_OUT2),
- GPIO_FN(GPO5), \
- GPIO_FN(SCIFA0_SCK), \
- GPIO_FN(FSICOSLDT3), \
- GPIO_FN(PORT16_VIO_CKOR),
- GPIO_FN(SCIFA0_TXD),
- GPIO_FN(SCIFA7_TXD),
- GPIO_FN(SCIFA7_RTS_), \
- GPIO_FN(PORT19_VIO_CKO2),
- GPIO_FN(GPO0),
- GPIO_FN(GPO1),
- GPIO_FN(GPO2), \
- GPIO_FN(STATUS0),
- GPIO_FN(GPO3), \
- GPIO_FN(STATUS1),
- GPIO_FN(GPO4), \
- GPIO_FN(STATUS2),
- GPIO_FN(VINT),
- GPIO_FN(TCKON),
- GPIO_FN(XDVFS1), \
- GPIO_FN(PORT27_I2C_SCL2), \
- GPIO_FN(PORT27_I2C_SCL3), \
- GPIO_FN(MFG0_OUT1), \
- GPIO_FN(PORT27_IROUT),
- GPIO_FN(XDVFS2), \
- GPIO_FN(PORT28_I2C_SDA2), \
- GPIO_FN(PORT28_I2C_SDA3), \
- GPIO_FN(PORT28_TPU1TO1),
- GPIO_FN(SIM_RST), \
- GPIO_FN(PORT29_TPU1TO1),
- GPIO_FN(SIM_CLK), \
- GPIO_FN(PORT30_VIO_CKOR),
- GPIO_FN(SIM_D), \
- GPIO_FN(PORT31_IROUT),
- GPIO_FN(SCIFA4_TXD),
- GPIO_FN(SCIFA4_RXD), \
- GPIO_FN(XWUP),
- GPIO_FN(SCIFA4_RTS_),
- GPIO_FN(SCIFA4_CTS_),
- GPIO_FN(FSIBOBT), \
- GPIO_FN(FSIBIBT),
- GPIO_FN(FSIBOLR), \
- GPIO_FN(FSIBILR),
- GPIO_FN(FSIBOSLD),
- GPIO_FN(FSIBISLD),
- GPIO_FN(VACK),
- GPIO_FN(XTAL1L),
- GPIO_FN(SCIFA0_RTS_), \
- GPIO_FN(FSICOSLDT2),
- GPIO_FN(SCIFA0_RXD),
- GPIO_FN(SCIFA0_CTS_), \
- GPIO_FN(FSICOSLDT1),
- GPIO_FN(FSICOBT), \
- GPIO_FN(FSICIBT), \
- GPIO_FN(FSIDOBT), \
- GPIO_FN(FSIDIBT),
- GPIO_FN(FSICOLR), \
- GPIO_FN(FSICILR), \
- GPIO_FN(FSIDOLR), \
- GPIO_FN(FSIDILR),
- GPIO_FN(FSICOSLD), \
- GPIO_FN(PORT47_FSICSPDIF),
- GPIO_FN(FSICISLD), \
- GPIO_FN(FSIDISLD),
- GPIO_FN(FSIACK), \
- GPIO_FN(PORT49_IRDA_OUT), \
- GPIO_FN(PORT49_IROUT), \
- GPIO_FN(FSIAOMC),
- GPIO_FN(FSIAOLR), \
- GPIO_FN(BBIF2_TSYNC2), \
- GPIO_FN(TPU2TO2), \
- GPIO_FN(FSIAILR),
-
- GPIO_FN(FSIAOBT), \
- GPIO_FN(BBIF2_TSCK2), \
- GPIO_FN(TPU2TO3), \
- GPIO_FN(FSIAIBT),
- GPIO_FN(FSIAOSLD), \
- GPIO_FN(BBIF2_TXD2),
- GPIO_FN(FSIASPDIF), \
- GPIO_FN(PORT53_IRDA_IN), \
- GPIO_FN(TPU3TO3), \
- GPIO_FN(FSIBSPDIF), \
- GPIO_FN(PORT53_FSICSPDIF),
- GPIO_FN(FSIBCK), \
- GPIO_FN(PORT54_IRDA_FIRSEL), \
- GPIO_FN(TPU3TO2), \
- GPIO_FN(FSIBOMC), \
- GPIO_FN(FSICCK), \
- GPIO_FN(FSICOMC),
- GPIO_FN(FSIAISLD), \
- GPIO_FN(TPU0TO0),
- GPIO_FN(A0), \
- GPIO_FN(BS_),
- GPIO_FN(A12), \
- GPIO_FN(PORT58_KEYOUT7), \
- GPIO_FN(TPU4TO2),
- GPIO_FN(A13), \
- GPIO_FN(PORT59_KEYOUT6), \
- GPIO_FN(TPU0TO1),
- GPIO_FN(A14), \
- GPIO_FN(KEYOUT5),
- GPIO_FN(A15), \
- GPIO_FN(KEYOUT4),
- GPIO_FN(A16), \
- GPIO_FN(KEYOUT3), \
- GPIO_FN(MSIOF0_SS1),
- GPIO_FN(A17), \
- GPIO_FN(KEYOUT2), \
- GPIO_FN(MSIOF0_TSYNC),
- GPIO_FN(A18), \
- GPIO_FN(KEYOUT1), \
- GPIO_FN(MSIOF0_TSCK),
- GPIO_FN(A19), \
- GPIO_FN(KEYOUT0), \
- GPIO_FN(MSIOF0_TXD),
- GPIO_FN(A20), \
- GPIO_FN(KEYIN0), \
- GPIO_FN(MSIOF0_RSCK),
- GPIO_FN(A21), \
- GPIO_FN(KEYIN1), \
- GPIO_FN(MSIOF0_RSYNC),
- GPIO_FN(A22), \
- GPIO_FN(KEYIN2), \
- GPIO_FN(MSIOF0_MCK0),
- GPIO_FN(A23), \
- GPIO_FN(KEYIN3), \
- GPIO_FN(MSIOF0_MCK1),
- GPIO_FN(A24), \
- GPIO_FN(KEYIN4), \
- GPIO_FN(MSIOF0_RXD),
- GPIO_FN(A25), \
- GPIO_FN(KEYIN5), \
- GPIO_FN(MSIOF0_SS2),
- GPIO_FN(A26), \
- GPIO_FN(KEYIN6),
- GPIO_FN(KEYIN7),
- GPIO_FN(D0_NAF0),
- GPIO_FN(D1_NAF1),
- GPIO_FN(D2_NAF2),
- GPIO_FN(D3_NAF3),
- GPIO_FN(D4_NAF4),
- GPIO_FN(D5_NAF5),
- GPIO_FN(D6_NAF6),
- GPIO_FN(D7_NAF7),
- GPIO_FN(D8_NAF8),
- GPIO_FN(D9_NAF9),
- GPIO_FN(D10_NAF10),
- GPIO_FN(D11_NAF11),
- GPIO_FN(D12_NAF12),
- GPIO_FN(D13_NAF13),
- GPIO_FN(D14_NAF14),
- GPIO_FN(D15_NAF15),
- GPIO_FN(CS4_),
- GPIO_FN(CS5A_), \
- GPIO_FN(PORT91_RDWR),
- GPIO_FN(CS5B_), \
- GPIO_FN(FCE1_),
- GPIO_FN(CS6B_), \
- GPIO_FN(DACK0),
- GPIO_FN(FCE0_), \
- GPIO_FN(CS6A_),
- GPIO_FN(WAIT_), \
- GPIO_FN(DREQ0),
- GPIO_FN(RD__FSC),
- GPIO_FN(WE0__FWE), \
- GPIO_FN(RDWR_FWE),
- GPIO_FN(WE1_),
- GPIO_FN(FRB),
- GPIO_FN(CKO),
- GPIO_FN(NBRSTOUT_),
- GPIO_FN(NBRST_),
- GPIO_FN(BBIF2_TXD),
- GPIO_FN(BBIF2_RXD),
- GPIO_FN(BBIF2_SYNC),
- GPIO_FN(BBIF2_SCK),
- GPIO_FN(SCIFA3_CTS_), \
- GPIO_FN(MFG3_IN2),
- GPIO_FN(SCIFA3_RXD), \
- GPIO_FN(MFG3_IN1),
- GPIO_FN(BBIF1_SS2), \
- GPIO_FN(SCIFA3_RTS_), \
- GPIO_FN(MFG3_OUT1),
- GPIO_FN(SCIFA3_TXD),
- GPIO_FN(HSI_RX_DATA), \
- GPIO_FN(BBIF1_RXD),
- GPIO_FN(HSI_TX_WAKE), \
- GPIO_FN(BBIF1_TSCK),
- GPIO_FN(HSI_TX_DATA), \
- GPIO_FN(BBIF1_TSYNC),
- GPIO_FN(HSI_TX_READY), \
- GPIO_FN(BBIF1_TXD),
- GPIO_FN(HSI_RX_READY), \
- GPIO_FN(BBIF1_RSCK), \
- GPIO_FN(PORT115_I2C_SCL2), \
- GPIO_FN(PORT115_I2C_SCL3),
- GPIO_FN(HSI_RX_WAKE), \
- GPIO_FN(BBIF1_RSYNC), \
- GPIO_FN(PORT116_I2C_SDA2), \
- GPIO_FN(PORT116_I2C_SDA3),
- GPIO_FN(HSI_RX_FLAG), \
- GPIO_FN(BBIF1_SS1), \
- GPIO_FN(BBIF1_FLOW),
- GPIO_FN(HSI_TX_FLAG),
- GPIO_FN(VIO_VD), \
- GPIO_FN(PORT128_LCD2VSYN), \
- GPIO_FN(VIO2_VD), \
- GPIO_FN(LCD2D0),
-
- GPIO_FN(VIO_HD), \
- GPIO_FN(PORT129_LCD2HSYN), \
- GPIO_FN(PORT129_LCD2CS_), \
- GPIO_FN(VIO2_HD), \
- GPIO_FN(LCD2D1),
- GPIO_FN(VIO_D0), \
- GPIO_FN(PORT130_MSIOF2_RXD), \
- GPIO_FN(LCD2D10),
- GPIO_FN(VIO_D1), \
- GPIO_FN(PORT131_KEYOUT6), \
- GPIO_FN(PORT131_MSIOF2_SS1), \
- GPIO_FN(PORT131_KEYOUT11), \
- GPIO_FN(LCD2D11),
- GPIO_FN(VIO_D2), \
- GPIO_FN(PORT132_KEYOUT7), \
- GPIO_FN(PORT132_MSIOF2_SS2), \
- GPIO_FN(PORT132_KEYOUT10), \
- GPIO_FN(LCD2D12),
- GPIO_FN(VIO_D3), \
- GPIO_FN(MSIOF2_TSYNC), \
- GPIO_FN(LCD2D13),
- GPIO_FN(VIO_D4), \
- GPIO_FN(MSIOF2_TXD), \
- GPIO_FN(LCD2D14),
- GPIO_FN(VIO_D5), \
- GPIO_FN(MSIOF2_TSCK), \
- GPIO_FN(LCD2D15),
- GPIO_FN(VIO_D6), \
- GPIO_FN(PORT136_KEYOUT8), \
- GPIO_FN(LCD2D16),
- GPIO_FN(VIO_D7), \
- GPIO_FN(PORT137_KEYOUT9), \
- GPIO_FN(LCD2D17),
- GPIO_FN(VIO_D8), \
- GPIO_FN(PORT138_KEYOUT8), \
- GPIO_FN(VIO2_D0), \
- GPIO_FN(LCD2D6),
- GPIO_FN(VIO_D9), \
- GPIO_FN(PORT139_KEYOUT9), \
- GPIO_FN(VIO2_D1), \
- GPIO_FN(LCD2D7),
- GPIO_FN(VIO_D10), \
- GPIO_FN(TPU0TO2), \
- GPIO_FN(VIO2_D2), \
- GPIO_FN(LCD2D8),
- GPIO_FN(VIO_D11), \
- GPIO_FN(TPU0TO3), \
- GPIO_FN(VIO2_D3), \
- GPIO_FN(LCD2D9),
- GPIO_FN(VIO_D12), \
- GPIO_FN(PORT142_KEYOUT10), \
- GPIO_FN(VIO2_D4), \
- GPIO_FN(LCD2D2),
- GPIO_FN(VIO_D13), \
- GPIO_FN(PORT143_KEYOUT11), \
- GPIO_FN(PORT143_KEYOUT6), \
- GPIO_FN(VIO2_D5), \
- GPIO_FN(LCD2D3),
- GPIO_FN(VIO_D14), \
- GPIO_FN(PORT144_KEYOUT7), \
- GPIO_FN(VIO2_D6), \
- GPIO_FN(LCD2D4),
- GPIO_FN(VIO_D15), \
- GPIO_FN(TPU1TO3), \
- GPIO_FN(PORT145_LCD2DISP), \
- GPIO_FN(PORT145_LCD2RS), \
- GPIO_FN(VIO2_D7), \
- GPIO_FN(LCD2D5),
- GPIO_FN(VIO_CLK), \
- GPIO_FN(LCD2DCK), \
- GPIO_FN(PORT146_LCD2WR_), \
- GPIO_FN(VIO2_CLK), \
- GPIO_FN(LCD2D18),
- GPIO_FN(VIO_FIELD), \
- GPIO_FN(LCD2RD_), \
- GPIO_FN(VIO2_FIELD), \
- GPIO_FN(LCD2D19),
- GPIO_FN(VIO_CKO),
- GPIO_FN(A27), \
- GPIO_FN(PORT149_RDWR), \
- GPIO_FN(MFG0_IN1), \
- GPIO_FN(PORT149_KEYOUT9),
- GPIO_FN(MFG0_IN2),
- GPIO_FN(TS_SPSYNC3), \
- GPIO_FN(MSIOF2_RSCK),
- GPIO_FN(TS_SDAT3), \
- GPIO_FN(MSIOF2_RSYNC),
- GPIO_FN(TPU1TO2), \
- GPIO_FN(TS_SDEN3), \
- GPIO_FN(PORT153_MSIOF2_SS1),
- GPIO_FN(SCIFA2_TXD1), \
- GPIO_FN(MSIOF2_MCK0),
- GPIO_FN(SCIFA2_RXD1), \
- GPIO_FN(MSIOF2_MCK1),
- GPIO_FN(SCIFA2_RTS1_), \
- GPIO_FN(PORT156_MSIOF2_SS2),
- GPIO_FN(SCIFA2_CTS1_), \
- GPIO_FN(PORT157_MSIOF2_RXD),
- GPIO_FN(DINT_), \
- GPIO_FN(SCIFA2_SCK1), \
- GPIO_FN(TS_SCK3),
- GPIO_FN(PORT159_SCIFB_SCK), \
- GPIO_FN(PORT159_SCIFA5_SCK), \
- GPIO_FN(NMI),
- GPIO_FN(PORT160_SCIFB_TXD), \
- GPIO_FN(PORT160_SCIFA5_TXD),
- GPIO_FN(PORT161_SCIFB_CTS_), \
- GPIO_FN(PORT161_SCIFA5_CTS_),
- GPIO_FN(PORT162_SCIFB_RXD), \
- GPIO_FN(PORT162_SCIFA5_RXD),
- GPIO_FN(PORT163_SCIFB_RTS_), \
- GPIO_FN(PORT163_SCIFA5_RTS_), \
- GPIO_FN(TPU3TO0),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDD1), \
- GPIO_FN(PORT193_SCIFA5_CTS_), \
- GPIO_FN(BBIF2_TSYNC1),
- GPIO_FN(LCDD2), \
- GPIO_FN(PORT194_SCIFA5_RTS_), \
- GPIO_FN(BBIF2_TSCK1),
- GPIO_FN(LCDD3), \
- GPIO_FN(PORT195_SCIFA5_RXD), \
- GPIO_FN(BBIF2_TXD1),
- GPIO_FN(LCDD4), \
- GPIO_FN(PORT196_SCIFA5_TXD),
- GPIO_FN(LCDD5), \
- GPIO_FN(PORT197_SCIFA5_SCK), \
- GPIO_FN(MFG2_OUT2), \
- GPIO_FN(TPU2TO1),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD7), \
- GPIO_FN(TPU4TO1), \
- GPIO_FN(MFG4_OUT2),
- GPIO_FN(LCDD8), \
- GPIO_FN(D16),
- GPIO_FN(LCDD9), \
- GPIO_FN(D17),
- GPIO_FN(LCDD10), \
- GPIO_FN(D18),
- GPIO_FN(LCDD11), \
- GPIO_FN(D19),
- GPIO_FN(LCDD12), \
- GPIO_FN(D20),
- GPIO_FN(LCDD13), \
- GPIO_FN(D21),
- GPIO_FN(LCDD14), \
- GPIO_FN(D22),
- GPIO_FN(LCDD15), \
- GPIO_FN(PORT207_MSIOF0L_SS1), \
- GPIO_FN(D23),
- GPIO_FN(LCDD16), \
- GPIO_FN(PORT208_MSIOF0L_SS2), \
- GPIO_FN(D24),
- GPIO_FN(LCDD17), \
- GPIO_FN(D25),
- GPIO_FN(LCDD18), \
- GPIO_FN(DREQ2), \
- GPIO_FN(PORT210_MSIOF0L_SS1), \
- GPIO_FN(D26),
- GPIO_FN(LCDD19), \
- GPIO_FN(PORT211_MSIOF0L_SS2), \
- GPIO_FN(D27),
- GPIO_FN(LCDD20), \
- GPIO_FN(TS_SPSYNC1), \
- GPIO_FN(MSIOF0L_MCK0), \
- GPIO_FN(D28),
- GPIO_FN(LCDD21), \
- GPIO_FN(TS_SDAT1), \
- GPIO_FN(MSIOF0L_MCK1), \
- GPIO_FN(D29),
- GPIO_FN(LCDD22), \
- GPIO_FN(TS_SDEN1), \
- GPIO_FN(MSIOF0L_RSCK), \
- GPIO_FN(D30),
- GPIO_FN(LCDD23), \
- GPIO_FN(TS_SCK1), \
- GPIO_FN(MSIOF0L_RSYNC), \
- GPIO_FN(D31),
- GPIO_FN(LCDDCK), \
- GPIO_FN(LCDWR_),
- GPIO_FN(LCDRD_), \
- GPIO_FN(DACK2), \
- GPIO_FN(PORT217_LCD2RS), \
- GPIO_FN(MSIOF0L_TSYNC), \
- GPIO_FN(VIO2_FIELD3), \
- GPIO_FN(PORT217_LCD2DISP),
- GPIO_FN(LCDHSYN), \
- GPIO_FN(LCDCS_), \
- GPIO_FN(LCDCS2_), \
- GPIO_FN(DACK3), \
- GPIO_FN(PORT218_VIO_CKOR),
- GPIO_FN(LCDDISP), \
- GPIO_FN(LCDRS), \
- GPIO_FN(PORT219_LCD2WR_), \
- GPIO_FN(DREQ3), \
- GPIO_FN(MSIOF0L_TSCK), \
- GPIO_FN(VIO2_CLK3), \
- GPIO_FN(LCD2DCK_2),
- GPIO_FN(LCDVSYN), \
- GPIO_FN(LCDVSYN2),
- GPIO_FN(LCDLCLK), \
- GPIO_FN(DREQ1), \
- GPIO_FN(PORT221_LCD2CS_), \
- GPIO_FN(PWEN), \
- GPIO_FN(MSIOF0L_RXD), \
- GPIO_FN(VIO2_HD3), \
- GPIO_FN(PORT221_LCD2HSYN),
- GPIO_FN(LCDDON), \
- GPIO_FN(LCDDON2), \
- GPIO_FN(DACK1), \
- GPIO_FN(OVCN), \
- GPIO_FN(MSIOF0L_TXD), \
- GPIO_FN(VIO2_VD3), \
- GPIO_FN(PORT222_LCD2VSYN),
-
- GPIO_FN(SCIFA1_TXD), \
- GPIO_FN(OVCN2),
- GPIO_FN(EXTLP), \
- GPIO_FN(SCIFA1_SCK), \
- GPIO_FN(PORT226_VIO_CKO2),
- GPIO_FN(SCIFA1_RTS_), \
- GPIO_FN(IDIN),
- GPIO_FN(SCIFA1_RXD),
- GPIO_FN(SCIFA1_CTS_), \
- GPIO_FN(MFG1_IN1),
- GPIO_FN(MSIOF1_TXD), \
- GPIO_FN(SCIFA2_TXD2),
- GPIO_FN(MSIOF1_TSYNC), \
- GPIO_FN(SCIFA2_CTS2_),
- GPIO_FN(MSIOF1_TSCK), \
- GPIO_FN(SCIFA2_SCK2),
- GPIO_FN(MSIOF1_RXD), \
- GPIO_FN(SCIFA2_RXD2),
- GPIO_FN(MSIOF1_RSCK), \
- GPIO_FN(SCIFA2_RTS2_), \
- GPIO_FN(VIO2_CLK2), \
- GPIO_FN(LCD2D20),
- GPIO_FN(MSIOF1_RSYNC), \
- GPIO_FN(MFG1_IN2), \
- GPIO_FN(VIO2_VD2), \
- GPIO_FN(LCD2D21),
- GPIO_FN(MSIOF1_MCK0), \
- GPIO_FN(PORT236_I2C_SDA2),
- GPIO_FN(MSIOF1_MCK1), \
- GPIO_FN(PORT237_I2C_SCL2),
- GPIO_FN(MSIOF1_SS1), \
- GPIO_FN(VIO2_FIELD2), \
- GPIO_FN(LCD2D22),
- GPIO_FN(MSIOF1_SS2), \
- GPIO_FN(VIO2_HD2), \
- GPIO_FN(LCD2D23),
- GPIO_FN(SCIFA6_TXD),
- GPIO_FN(PORT241_IRDA_OUT), \
- GPIO_FN(PORT241_IROUT), \
- GPIO_FN(MFG4_OUT1), \
- GPIO_FN(TPU4TO0),
- GPIO_FN(PORT242_IRDA_IN), \
- GPIO_FN(MFG4_IN2),
- GPIO_FN(PORT243_IRDA_FIRSEL), \
- GPIO_FN(PORT243_VIO_CKO2),
- GPIO_FN(PORT244_SCIFA5_CTS_), \
- GPIO_FN(MFG2_IN1), \
- GPIO_FN(PORT244_SCIFB_CTS_), \
- GPIO_FN(MSIOF2R_RXD),
- GPIO_FN(PORT245_SCIFA5_RTS_), \
- GPIO_FN(MFG2_IN2), \
- GPIO_FN(PORT245_SCIFB_RTS_), \
- GPIO_FN(MSIOF2R_TXD),
- GPIO_FN(PORT246_SCIFA5_RXD), \
- GPIO_FN(MFG1_OUT1), \
- GPIO_FN(PORT246_SCIFB_RXD), \
- GPIO_FN(TPU1TO0),
- GPIO_FN(PORT247_SCIFA5_TXD), \
- GPIO_FN(MFG3_OUT2), \
- GPIO_FN(PORT247_SCIFB_TXD), \
- GPIO_FN(TPU3TO1),
- GPIO_FN(PORT248_SCIFA5_SCK), \
- GPIO_FN(MFG2_OUT1), \
- GPIO_FN(PORT248_SCIFB_SCK), \
- GPIO_FN(TPU2TO0), \
- GPIO_FN(PORT248_I2C_SCL3), \
- GPIO_FN(MSIOF2R_TSCK),
- GPIO_FN(PORT249_IROUT), \
- GPIO_FN(MFG4_IN1), \
- GPIO_FN(PORT249_I2C_SDA3), \
- GPIO_FN(MSIOF2R_TSYNC),
- GPIO_FN(SDHICLK0),
- GPIO_FN(SDHICD0),
- GPIO_FN(SDHID0_0),
- GPIO_FN(SDHID0_1),
- GPIO_FN(SDHID0_2),
- GPIO_FN(SDHID0_3),
- GPIO_FN(SDHICMD0),
- GPIO_FN(SDHIWP0),
- GPIO_FN(SDHICLK1),
- GPIO_FN(SDHID1_0), \
- GPIO_FN(TS_SPSYNC2),
- GPIO_FN(SDHID1_1), \
- GPIO_FN(TS_SDAT2),
- GPIO_FN(SDHID1_2), \
- GPIO_FN(TS_SDEN2),
- GPIO_FN(SDHID1_3), \
- GPIO_FN(TS_SCK2),
- GPIO_FN(SDHICMD1),
- GPIO_FN(SDHICLK2),
- GPIO_FN(SDHID2_0), \
- GPIO_FN(TS_SPSYNC4),
- GPIO_FN(SDHID2_1), \
- GPIO_FN(TS_SDAT4),
- GPIO_FN(SDHID2_2), \
- GPIO_FN(TS_SDEN4),
- GPIO_FN(SDHID2_3), \
- GPIO_FN(TS_SCK4),
- GPIO_FN(SDHICMD2),
- GPIO_FN(MMCCLK0),
- GPIO_FN(MMCD0_0),
- GPIO_FN(MMCD0_1),
- GPIO_FN(MMCD0_2),
- GPIO_FN(MMCD0_3),
- GPIO_FN(MMCD0_4), \
- GPIO_FN(TS_SPSYNC5),
- GPIO_FN(MMCD0_5), \
- GPIO_FN(TS_SDAT5),
- GPIO_FN(MMCD0_6), \
- GPIO_FN(TS_SDEN5),
- GPIO_FN(MMCD0_7), \
- GPIO_FN(TS_SCK5),
- GPIO_FN(MMCCMD0),
- GPIO_FN(RESETOUTS_), \
- GPIO_FN(EXTAL2OUT),
- GPIO_FN(MCP_WAIT__MCP_FRB),
- GPIO_FN(MCP_CKO), \
- GPIO_FN(MMCCLK1),
- GPIO_FN(MCP_D15_MCP_NAF15),
- GPIO_FN(MCP_D14_MCP_NAF14),
- GPIO_FN(MCP_D13_MCP_NAF13),
- GPIO_FN(MCP_D12_MCP_NAF12),
- GPIO_FN(MCP_D11_MCP_NAF11),
- GPIO_FN(MCP_D10_MCP_NAF10),
- GPIO_FN(MCP_D9_MCP_NAF9),
- GPIO_FN(MCP_D8_MCP_NAF8), \
- GPIO_FN(MMCCMD1),
- GPIO_FN(MCP_D7_MCP_NAF7), \
- GPIO_FN(MMCD1_7),
-
- GPIO_FN(MCP_D6_MCP_NAF6), \
- GPIO_FN(MMCD1_6),
- GPIO_FN(MCP_D5_MCP_NAF5), \
- GPIO_FN(MMCD1_5),
- GPIO_FN(MCP_D4_MCP_NAF4), \
- GPIO_FN(MMCD1_4),
- GPIO_FN(MCP_D3_MCP_NAF3), \
- GPIO_FN(MMCD1_3),
- GPIO_FN(MCP_D2_MCP_NAF2), \
- GPIO_FN(MMCD1_2),
- GPIO_FN(MCP_D1_MCP_NAF1), \
- GPIO_FN(MMCD1_1),
- GPIO_FN(MCP_D0_MCP_NAF0), \
- GPIO_FN(MMCD1_0),
- GPIO_FN(MCP_NBRSTOUT_),
- GPIO_FN(MCP_WE0__MCP_FWE), \
- GPIO_FN(MCP_RDWR_MCP_FWE),
-
- /* MSEL2 special cases */
- GPIO_FN(TSIF2_TS_XX1),
- GPIO_FN(TSIF2_TS_XX2),
- GPIO_FN(TSIF2_TS_XX3),
- GPIO_FN(TSIF2_TS_XX4),
- GPIO_FN(TSIF2_TS_XX5),
- GPIO_FN(TSIF1_TS_XX1),
- GPIO_FN(TSIF1_TS_XX2),
- GPIO_FN(TSIF1_TS_XX3),
- GPIO_FN(TSIF1_TS_XX4),
- GPIO_FN(TSIF1_TS_XX5),
- GPIO_FN(TSIF0_TS_XX1),
- GPIO_FN(TSIF0_TS_XX2),
- GPIO_FN(TSIF0_TS_XX3),
- GPIO_FN(TSIF0_TS_XX4),
- GPIO_FN(TSIF0_TS_XX5),
- GPIO_FN(MST1_TS_XX1),
- GPIO_FN(MST1_TS_XX2),
- GPIO_FN(MST1_TS_XX3),
- GPIO_FN(MST1_TS_XX4),
- GPIO_FN(MST1_TS_XX5),
- GPIO_FN(MST0_TS_XX1),
- GPIO_FN(MST0_TS_XX2),
- GPIO_FN(MST0_TS_XX3),
- GPIO_FN(MST0_TS_XX4),
- GPIO_FN(MST0_TS_XX5),
-
- /* MSEL3 special cases */
- GPIO_FN(SDHI0_VCCQ_MC0_ON),
- GPIO_FN(SDHI0_VCCQ_MC0_OFF),
- GPIO_FN(DEBUG_MON_VIO),
- GPIO_FN(DEBUG_MON_LCDD),
- GPIO_FN(LCDC_LCDC0),
- GPIO_FN(LCDC_LCDC1),
-
- /* MSEL4 special cases */
- GPIO_FN(IRQ9_MEM_INT),
- GPIO_FN(IRQ9_MCP_INT),
- GPIO_FN(A11),
- GPIO_FN(KEYOUT8),
- GPIO_FN(TPU4TO3),
- GPIO_FN(RESETA_N_PU_ON),
- GPIO_FN(RESETA_N_PU_OFF),
- GPIO_FN(EDBGREQ_PD),
- GPIO_FN(EDBGREQ_PU),
-
- /* Functions with pull-ups */
- GPIO_FN(KEYIN0_PU),
- GPIO_FN(KEYIN1_PU),
- GPIO_FN(KEYIN2_PU),
- GPIO_FN(KEYIN3_PU),
- GPIO_FN(KEYIN4_PU),
- GPIO_FN(KEYIN5_PU),
- GPIO_FN(KEYIN6_PU),
- GPIO_FN(KEYIN7_PU),
- GPIO_FN(SDHICD0_PU),
- GPIO_FN(SDHID0_0_PU),
- GPIO_FN(SDHID0_1_PU),
- GPIO_FN(SDHID0_2_PU),
- GPIO_FN(SDHID0_3_PU),
- GPIO_FN(SDHICMD0_PU),
- GPIO_FN(SDHIWP0_PU),
- GPIO_FN(SDHID1_0_PU),
- GPIO_FN(SDHID1_1_PU),
- GPIO_FN(SDHID1_2_PU),
- GPIO_FN(SDHID1_3_PU),
- GPIO_FN(SDHICMD1_PU),
- GPIO_FN(SDHID2_0_PU),
- GPIO_FN(SDHID2_1_PU),
- GPIO_FN(SDHID2_2_PU),
- GPIO_FN(SDHID2_3_PU),
- GPIO_FN(SDHICMD2_PU),
- GPIO_FN(MMCCMD0_PU),
- GPIO_FN(MMCCMD1_PU),
- GPIO_FN(MMCD0_0_PU),
- GPIO_FN(MMCD0_1_PU),
- GPIO_FN(MMCD0_2_PU),
- GPIO_FN(MMCD0_3_PU),
- GPIO_FN(MMCD0_4_PU),
- GPIO_FN(MMCD0_5_PU),
- GPIO_FN(MMCD0_6_PU),
- GPIO_FN(MMCD0_7_PU),
- GPIO_FN(FSIACK_PU),
- GPIO_FN(FSIAILR_PU),
- GPIO_FN(FSIAIBT_PU),
- GPIO_FN(FSIAISLD_PU),
-};
-
-static struct pinmux_cfg_reg pinmux_config_regs[] = {
- PORTCR(0, 0xe6050000), /* PORT0CR */
- PORTCR(1, 0xe6050001), /* PORT1CR */
- PORTCR(2, 0xe6050002), /* PORT2CR */
- PORTCR(3, 0xe6050003), /* PORT3CR */
- PORTCR(4, 0xe6050004), /* PORT4CR */
- PORTCR(5, 0xe6050005), /* PORT5CR */
- PORTCR(6, 0xe6050006), /* PORT6CR */
- PORTCR(7, 0xe6050007), /* PORT7CR */
- PORTCR(8, 0xe6050008), /* PORT8CR */
- PORTCR(9, 0xe6050009), /* PORT9CR */
-
- PORTCR(10, 0xe605000a), /* PORT10CR */
- PORTCR(11, 0xe605000b), /* PORT11CR */
- PORTCR(12, 0xe605000c), /* PORT12CR */
- PORTCR(13, 0xe605000d), /* PORT13CR */
- PORTCR(14, 0xe605000e), /* PORT14CR */
- PORTCR(15, 0xe605000f), /* PORT15CR */
- PORTCR(16, 0xe6050010), /* PORT16CR */
- PORTCR(17, 0xe6050011), /* PORT17CR */
- PORTCR(18, 0xe6050012), /* PORT18CR */
- PORTCR(19, 0xe6050013), /* PORT19CR */
-
- PORTCR(20, 0xe6050014), /* PORT20CR */
- PORTCR(21, 0xe6050015), /* PORT21CR */
- PORTCR(22, 0xe6050016), /* PORT22CR */
- PORTCR(23, 0xe6050017), /* PORT23CR */
- PORTCR(24, 0xe6050018), /* PORT24CR */
- PORTCR(25, 0xe6050019), /* PORT25CR */
- PORTCR(26, 0xe605001a), /* PORT26CR */
- PORTCR(27, 0xe605001b), /* PORT27CR */
- PORTCR(28, 0xe605001c), /* PORT28CR */
- PORTCR(29, 0xe605001d), /* PORT29CR */
-
- PORTCR(30, 0xe605001e), /* PORT30CR */
- PORTCR(31, 0xe605001f), /* PORT31CR */
- PORTCR(32, 0xe6051020), /* PORT32CR */
- PORTCR(33, 0xe6051021), /* PORT33CR */
- PORTCR(34, 0xe6051022), /* PORT34CR */
- PORTCR(35, 0xe6051023), /* PORT35CR */
- PORTCR(36, 0xe6051024), /* PORT36CR */
- PORTCR(37, 0xe6051025), /* PORT37CR */
- PORTCR(38, 0xe6051026), /* PORT38CR */
- PORTCR(39, 0xe6051027), /* PORT39CR */
-
- PORTCR(40, 0xe6051028), /* PORT40CR */
- PORTCR(41, 0xe6051029), /* PORT41CR */
- PORTCR(42, 0xe605102a), /* PORT42CR */
- PORTCR(43, 0xe605102b), /* PORT43CR */
- PORTCR(44, 0xe605102c), /* PORT44CR */
- PORTCR(45, 0xe605102d), /* PORT45CR */
- PORTCR(46, 0xe605102e), /* PORT46CR */
- PORTCR(47, 0xe605102f), /* PORT47CR */
- PORTCR(48, 0xe6051030), /* PORT48CR */
- PORTCR(49, 0xe6051031), /* PORT49CR */
-
- PORTCR(50, 0xe6051032), /* PORT50CR */
- PORTCR(51, 0xe6051033), /* PORT51CR */
- PORTCR(52, 0xe6051034), /* PORT52CR */
- PORTCR(53, 0xe6051035), /* PORT53CR */
- PORTCR(54, 0xe6051036), /* PORT54CR */
- PORTCR(55, 0xe6051037), /* PORT55CR */
- PORTCR(56, 0xe6051038), /* PORT56CR */
- PORTCR(57, 0xe6051039), /* PORT57CR */
- PORTCR(58, 0xe605103a), /* PORT58CR */
- PORTCR(59, 0xe605103b), /* PORT59CR */
-
- PORTCR(60, 0xe605103c), /* PORT60CR */
- PORTCR(61, 0xe605103d), /* PORT61CR */
- PORTCR(62, 0xe605103e), /* PORT62CR */
- PORTCR(63, 0xe605103f), /* PORT63CR */
- PORTCR(64, 0xe6051040), /* PORT64CR */
- PORTCR(65, 0xe6051041), /* PORT65CR */
- PORTCR(66, 0xe6051042), /* PORT66CR */
- PORTCR(67, 0xe6051043), /* PORT67CR */
- PORTCR(68, 0xe6051044), /* PORT68CR */
- PORTCR(69, 0xe6051045), /* PORT69CR */
-
- PORTCR(70, 0xe6051046), /* PORT70CR */
- PORTCR(71, 0xe6051047), /* PORT71CR */
- PORTCR(72, 0xe6051048), /* PORT72CR */
- PORTCR(73, 0xe6051049), /* PORT73CR */
- PORTCR(74, 0xe605104a), /* PORT74CR */
- PORTCR(75, 0xe605104b), /* PORT75CR */
- PORTCR(76, 0xe605104c), /* PORT76CR */
- PORTCR(77, 0xe605104d), /* PORT77CR */
- PORTCR(78, 0xe605104e), /* PORT78CR */
- PORTCR(79, 0xe605104f), /* PORT79CR */
-
- PORTCR(80, 0xe6051050), /* PORT80CR */
- PORTCR(81, 0xe6051051), /* PORT81CR */
- PORTCR(82, 0xe6051052), /* PORT82CR */
- PORTCR(83, 0xe6051053), /* PORT83CR */
- PORTCR(84, 0xe6051054), /* PORT84CR */
- PORTCR(85, 0xe6051055), /* PORT85CR */
- PORTCR(86, 0xe6051056), /* PORT86CR */
- PORTCR(87, 0xe6051057), /* PORT87CR */
- PORTCR(88, 0xe6051058), /* PORT88CR */
- PORTCR(89, 0xe6051059), /* PORT89CR */
-
- PORTCR(90, 0xe605105a), /* PORT90CR */
- PORTCR(91, 0xe605105b), /* PORT91CR */
- PORTCR(92, 0xe605105c), /* PORT92CR */
- PORTCR(93, 0xe605105d), /* PORT93CR */
- PORTCR(94, 0xe605105e), /* PORT94CR */
- PORTCR(95, 0xe605105f), /* PORT95CR */
- PORTCR(96, 0xe6052060), /* PORT96CR */
- PORTCR(97, 0xe6052061), /* PORT97CR */
- PORTCR(98, 0xe6052062), /* PORT98CR */
- PORTCR(99, 0xe6052063), /* PORT99CR */
-
- PORTCR(100, 0xe6052064), /* PORT100CR */
- PORTCR(101, 0xe6052065), /* PORT101CR */
- PORTCR(102, 0xe6052066), /* PORT102CR */
- PORTCR(103, 0xe6052067), /* PORT103CR */
- PORTCR(104, 0xe6052068), /* PORT104CR */
- PORTCR(105, 0xe6052069), /* PORT105CR */
- PORTCR(106, 0xe605206a), /* PORT106CR */
- PORTCR(107, 0xe605206b), /* PORT107CR */
- PORTCR(108, 0xe605206c), /* PORT108CR */
- PORTCR(109, 0xe605206d), /* PORT109CR */
-
- PORTCR(110, 0xe605206e), /* PORT110CR */
- PORTCR(111, 0xe605206f), /* PORT111CR */
- PORTCR(112, 0xe6052070), /* PORT112CR */
- PORTCR(113, 0xe6052071), /* PORT113CR */
- PORTCR(114, 0xe6052072), /* PORT114CR */
- PORTCR(115, 0xe6052073), /* PORT115CR */
- PORTCR(116, 0xe6052074), /* PORT116CR */
- PORTCR(117, 0xe6052075), /* PORT117CR */
- PORTCR(118, 0xe6052076), /* PORT118CR */
-
- PORTCR(128, 0xe6052080), /* PORT128CR */
- PORTCR(129, 0xe6052081), /* PORT129CR */
-
- PORTCR(130, 0xe6052082), /* PORT130CR */
- PORTCR(131, 0xe6052083), /* PORT131CR */
- PORTCR(132, 0xe6052084), /* PORT132CR */
- PORTCR(133, 0xe6052085), /* PORT133CR */
- PORTCR(134, 0xe6052086), /* PORT134CR */
- PORTCR(135, 0xe6052087), /* PORT135CR */
- PORTCR(136, 0xe6052088), /* PORT136CR */
- PORTCR(137, 0xe6052089), /* PORT137CR */
- PORTCR(138, 0xe605208a), /* PORT138CR */
- PORTCR(139, 0xe605208b), /* PORT139CR */
-
- PORTCR(140, 0xe605208c), /* PORT140CR */
- PORTCR(141, 0xe605208d), /* PORT141CR */
- PORTCR(142, 0xe605208e), /* PORT142CR */
- PORTCR(143, 0xe605208f), /* PORT143CR */
- PORTCR(144, 0xe6052090), /* PORT144CR */
- PORTCR(145, 0xe6052091), /* PORT145CR */
- PORTCR(146, 0xe6052092), /* PORT146CR */
- PORTCR(147, 0xe6052093), /* PORT147CR */
- PORTCR(148, 0xe6052094), /* PORT148CR */
- PORTCR(149, 0xe6052095), /* PORT149CR */
-
- PORTCR(150, 0xe6052096), /* PORT150CR */
- PORTCR(151, 0xe6052097), /* PORT151CR */
- PORTCR(152, 0xe6052098), /* PORT152CR */
- PORTCR(153, 0xe6052099), /* PORT153CR */
- PORTCR(154, 0xe605209a), /* PORT154CR */
- PORTCR(155, 0xe605209b), /* PORT155CR */
- PORTCR(156, 0xe605209c), /* PORT156CR */
- PORTCR(157, 0xe605209d), /* PORT157CR */
- PORTCR(158, 0xe605209e), /* PORT158CR */
- PORTCR(159, 0xe605209f), /* PORT159CR */
-
- PORTCR(160, 0xe60520a0), /* PORT160CR */
- PORTCR(161, 0xe60520a1), /* PORT161CR */
- PORTCR(162, 0xe60520a2), /* PORT162CR */
- PORTCR(163, 0xe60520a3), /* PORT163CR */
- PORTCR(164, 0xe60520a4), /* PORT164CR */
-
- PORTCR(192, 0xe60520c0), /* PORT192CR */
- PORTCR(193, 0xe60520c1), /* PORT193CR */
- PORTCR(194, 0xe60520c2), /* PORT194CR */
- PORTCR(195, 0xe60520c3), /* PORT195CR */
- PORTCR(196, 0xe60520c4), /* PORT196CR */
- PORTCR(197, 0xe60520c5), /* PORT197CR */
- PORTCR(198, 0xe60520c6), /* PORT198CR */
- PORTCR(199, 0xe60520c7), /* PORT199CR */
-
- PORTCR(200, 0xe60520c8), /* PORT200CR */
- PORTCR(201, 0xe60520c9), /* PORT201CR */
- PORTCR(202, 0xe60520ca), /* PORT202CR */
- PORTCR(203, 0xe60520cb), /* PORT203CR */
- PORTCR(204, 0xe60520cc), /* PORT204CR */
- PORTCR(205, 0xe60520cd), /* PORT205CR */
- PORTCR(206, 0xe60520ce), /* PORT206CR */
- PORTCR(207, 0xe60520cf), /* PORT207CR */
- PORTCR(208, 0xe60520d0), /* PORT208CR */
- PORTCR(209, 0xe60520d1), /* PORT209CR */
-
- PORTCR(210, 0xe60520d2), /* PORT210CR */
- PORTCR(211, 0xe60520d3), /* PORT211CR */
- PORTCR(212, 0xe60520d4), /* PORT212CR */
- PORTCR(213, 0xe60520d5), /* PORT213CR */
- PORTCR(214, 0xe60520d6), /* PORT214CR */
- PORTCR(215, 0xe60520d7), /* PORT215CR */
- PORTCR(216, 0xe60520d8), /* PORT216CR */
- PORTCR(217, 0xe60520d9), /* PORT217CR */
- PORTCR(218, 0xe60520da), /* PORT218CR */
- PORTCR(219, 0xe60520db), /* PORT219CR */
-
- PORTCR(220, 0xe60520dc), /* PORT220CR */
- PORTCR(221, 0xe60520dd), /* PORT221CR */
- PORTCR(222, 0xe60520de), /* PORT222CR */
- PORTCR(223, 0xe60520df), /* PORT223CR */
- PORTCR(224, 0xe60530e0), /* PORT224CR */
- PORTCR(225, 0xe60530e1), /* PORT225CR */
- PORTCR(226, 0xe60530e2), /* PORT226CR */
- PORTCR(227, 0xe60530e3), /* PORT227CR */
- PORTCR(228, 0xe60530e4), /* PORT228CR */
- PORTCR(229, 0xe60530e5), /* PORT229CR */
-
- PORTCR(230, 0xe60530e6), /* PORT230CR */
- PORTCR(231, 0xe60530e7), /* PORT231CR */
- PORTCR(232, 0xe60530e8), /* PORT232CR */
- PORTCR(233, 0xe60530e9), /* PORT233CR */
- PORTCR(234, 0xe60530ea), /* PORT234CR */
- PORTCR(235, 0xe60530eb), /* PORT235CR */
- PORTCR(236, 0xe60530ec), /* PORT236CR */
- PORTCR(237, 0xe60530ed), /* PORT237CR */
- PORTCR(238, 0xe60530ee), /* PORT238CR */
- PORTCR(239, 0xe60530ef), /* PORT239CR */
-
- PORTCR(240, 0xe60530f0), /* PORT240CR */
- PORTCR(241, 0xe60530f1), /* PORT241CR */
- PORTCR(242, 0xe60530f2), /* PORT242CR */
- PORTCR(243, 0xe60530f3), /* PORT243CR */
- PORTCR(244, 0xe60530f4), /* PORT244CR */
- PORTCR(245, 0xe60530f5), /* PORT245CR */
- PORTCR(246, 0xe60530f6), /* PORT246CR */
- PORTCR(247, 0xe60530f7), /* PORT247CR */
- PORTCR(248, 0xe60530f8), /* PORT248CR */
- PORTCR(249, 0xe60530f9), /* PORT249CR */
-
- PORTCR(250, 0xe60530fa), /* PORT250CR */
- PORTCR(251, 0xe60530fb), /* PORT251CR */
- PORTCR(252, 0xe60530fc), /* PORT252CR */
- PORTCR(253, 0xe60530fd), /* PORT253CR */
- PORTCR(254, 0xe60530fe), /* PORT254CR */
- PORTCR(255, 0xe60530ff), /* PORT255CR */
- PORTCR(256, 0xe6053100), /* PORT256CR */
- PORTCR(257, 0xe6053101), /* PORT257CR */
- PORTCR(258, 0xe6053102), /* PORT258CR */
- PORTCR(259, 0xe6053103), /* PORT259CR */
-
- PORTCR(260, 0xe6053104), /* PORT260CR */
- PORTCR(261, 0xe6053105), /* PORT261CR */
- PORTCR(262, 0xe6053106), /* PORT262CR */
- PORTCR(263, 0xe6053107), /* PORT263CR */
- PORTCR(264, 0xe6053108), /* PORT264CR */
- PORTCR(265, 0xe6053109), /* PORT265CR */
- PORTCR(266, 0xe605310a), /* PORT266CR */
- PORTCR(267, 0xe605310b), /* PORT267CR */
- PORTCR(268, 0xe605310c), /* PORT268CR */
- PORTCR(269, 0xe605310d), /* PORT269CR */
-
- PORTCR(270, 0xe605310e), /* PORT270CR */
- PORTCR(271, 0xe605310f), /* PORT271CR */
- PORTCR(272, 0xe6053110), /* PORT272CR */
- PORTCR(273, 0xe6053111), /* PORT273CR */
- PORTCR(274, 0xe6053112), /* PORT274CR */
- PORTCR(275, 0xe6053113), /* PORT275CR */
- PORTCR(276, 0xe6053114), /* PORT276CR */
- PORTCR(277, 0xe6053115), /* PORT277CR */
- PORTCR(278, 0xe6053116), /* PORT278CR */
- PORTCR(279, 0xe6053117), /* PORT279CR */
-
- PORTCR(280, 0xe6053118), /* PORT280CR */
- PORTCR(281, 0xe6053119), /* PORT281CR */
- PORTCR(282, 0xe605311a), /* PORT282CR */
-
- PORTCR(288, 0xe6052120), /* PORT288CR */
- PORTCR(289, 0xe6052121), /* PORT289CR */
-
- PORTCR(290, 0xe6052122), /* PORT290CR */
- PORTCR(291, 0xe6052123), /* PORT291CR */
- PORTCR(292, 0xe6052124), /* PORT292CR */
- PORTCR(293, 0xe6052125), /* PORT293CR */
- PORTCR(294, 0xe6052126), /* PORT294CR */
- PORTCR(295, 0xe6052127), /* PORT295CR */
- PORTCR(296, 0xe6052128), /* PORT296CR */
- PORTCR(297, 0xe6052129), /* PORT297CR */
- PORTCR(298, 0xe605212a), /* PORT298CR */
- PORTCR(299, 0xe605212b), /* PORT299CR */
-
- PORTCR(300, 0xe605212c), /* PORT300CR */
- PORTCR(301, 0xe605212d), /* PORT301CR */
- PORTCR(302, 0xe605212e), /* PORT302CR */
- PORTCR(303, 0xe605212f), /* PORT303CR */
- PORTCR(304, 0xe6052130), /* PORT304CR */
- PORTCR(305, 0xe6052131), /* PORT305CR */
- PORTCR(306, 0xe6052132), /* PORT306CR */
- PORTCR(307, 0xe6052133), /* PORT307CR */
- PORTCR(308, 0xe6052134), /* PORT308CR */
- PORTCR(309, 0xe6052135), /* PORT309CR */
-
- { PINMUX_CFG_REG("MSEL2CR", 0xe605801c, 32, 1) {
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
- MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
- MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
- MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
- 0, 0,
- MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
- MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
- MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
- MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
- MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
- MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
- MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
- MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
- MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
- MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
- MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
- MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
- MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
- MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
- MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
- }
- },
- { PINMUX_CFG_REG("MSEL3CR", 0xe6058020, 32, 1) {
- 0, 0,
- 0, 0,
- 0, 0,
- MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- 0, 0,
- MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
- 0, 0,
- 0, 0,
- 0, 0,
- MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
- 0, 0,
- MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
- 0, 0,
- 0, 0,
- MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
- 0, 0,
- 0, 0,
- 0, 0,
- MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
- 0, 0,
- 0, 0,
- }
- },
- { PINMUX_CFG_REG("MSEL4CR", 0xe6058024, 32, 1) {
- 0, 0,
- 0, 0,
- MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
- 0, 0,
- MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
- MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
- 0, 0,
- 0, 0,
- 0, 0,
- MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
- MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
- MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
- MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
- 0, 0,
- 0, 0,
- 0, 0,
- MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
- 0, 0,
- MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
- MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
- MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
- MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
- MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
- MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
- MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
- 0, 0,
- 0, 0,
- MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
- 0, 0,
- 0, 0,
- MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
- 0, 0,
- }
- },
- { },
-};
-
-static struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
- PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
- PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
- PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
- PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
- PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
- PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
- PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
- PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
- },
- { PINMUX_DATA_REG("PORTD063_032DR", 0xe6055000, 32) {
- PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
- PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
- PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
- PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
- PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
- PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
- PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
- PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
- },
- { PINMUX_DATA_REG("PORTD095_064DR", 0xe6055004, 32) {
- PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
- PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
- PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
- PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
- PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
- PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
- PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
- PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
- },
- { PINMUX_DATA_REG("PORTR127_096DR", 0xe6056000, 32) {
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
- PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
- PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
- PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
- PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
- PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
- },
- { PINMUX_DATA_REG("PORTR159_128DR", 0xe6056004, 32) {
- PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
- PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
- PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
- PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
- PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
- PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
- PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
- PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
- },
- { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056008, 32) {
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, PORT164_DATA,
- PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
- },
- { PINMUX_DATA_REG("PORTR223_192DR", 0xe605600C, 32) {
- PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
- PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
- PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
- PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
- PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
- PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
- PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
- PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
- },
- { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
- PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
- PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
- PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
- PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
- PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
- PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
- PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
- PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
- },
- { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
- 0, 0, 0, 0,
- 0, PORT282_DATA, PORT281_DATA, PORT280_DATA,
- PORT279_DATA, PORT278_DATA, PORT277_DATA, PORT276_DATA,
- PORT275_DATA, PORT274_DATA, PORT273_DATA, PORT272_DATA,
- PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
- PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
- PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
- PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
- },
- { PINMUX_DATA_REG("PORTR319_288DR", 0xe6056010, 32) {
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, PORT309_DATA, PORT308_DATA,
- PORT307_DATA, PORT306_DATA, PORT305_DATA, PORT304_DATA,
- PORT303_DATA, PORT302_DATA, PORT301_DATA, PORT300_DATA,
- PORT299_DATA, PORT298_DATA, PORT297_DATA, PORT296_DATA,
- PORT295_DATA, PORT294_DATA, PORT293_DATA, PORT292_DATA,
- PORT291_DATA, PORT290_DATA, PORT289_DATA, PORT288_DATA }
- },
- { },
-};
-
-#if 0
-/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */
-#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5))
-#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5))
-#else
-#define EXT_IRQ16L(n) (n)
-#define EXT_IRQ16H(n) (n)
-#endif
-
-static struct pinmux_irq pinmux_irqs[] = {
- PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0),
- PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0),
- PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0),
- PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0),
- PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0),
- PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0),
- PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0),
- PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0),
- PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0),
- PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0),
- PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0),
- PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0),
- PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0),
- PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0),
- PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0),
- PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0),
- PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0),
- PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0),
- PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0),
- PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0),
- PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0),
- PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0),
- PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0),
- PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0),
- PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0),
- PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0),
- PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0),
- PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0),
- PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0),
- PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0),
- PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0),
- PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0),
-};
-
-static struct pinmux_info sh73a0_pinmux_info = {
- .name = "sh73a0_pfc",
- .reserved_id = PINMUX_RESERVED,
- .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
- .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .first_gpio = GPIO_PORT0,
- .last_gpio = GPIO_FN_FSIAISLD_PU,
-
- .gpios = pinmux_gpios,
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .gpio_data = pinmux_data,
- .gpio_data_size = ARRAY_SIZE(pinmux_data),
-
- .gpio_irq = pinmux_irqs,
- .gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
-};
-
-void sh73a0_pinmux_init(void)
-{
- register_pinmux(&sh73a0_pinmux_info);
-}
diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c
index 6cecec41450..3335d9482a2 100644
--- a/drivers/i2c/sh_i2c.c
+++ b/drivers/i2c/sh_i2c.c
@@ -172,14 +172,9 @@ static int sh_i2c_raw_read(struct sh_i2c *dev, u8 chip, u8 addr)
{
int ret = -1;
-#if defined(CONFIG_SH73A0)
- if (sh_i2c_set_addr(dev, chip, addr, 0) != 0)
- goto exit0;
-#else
if (sh_i2c_set_addr(dev, chip, addr, 1) != 0)
goto exit0;
udelay(100);
-#endif
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &dev->iccr);
sh_irq_dte(dev);
diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index e6ab6f1b9b7..660aaab6638 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -13,7 +13,6 @@ struct uart_port {
};
#if defined(CONFIG_CPU_SH7721) || \
- defined(CONFIG_SH73A0) || \
defined(CONFIG_R8A7740)
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define PORT_PTCR 0xA405011EUL
@@ -149,7 +148,6 @@ struct uart_port {
#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#if defined(CONFIG_CPU_SH7721) || \
- defined(CONFIG_SH73A0) || \
defined(CONFIG_R8A7740)
# define SCIF_ORER 0x0200
# define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
@@ -197,7 +195,6 @@ struct uart_port {
(((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
#if defined(CONFIG_CPU_SH7721) || \
- defined(CONFIG_SH73A0) || \
defined(CONFIG_R8A7740)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
@@ -278,8 +275,7 @@ static inline void sci_##name##_out(struct uart_port *port,\
SCI_OUT(sci_size, sci_offset, value);\
}
-#if defined(CONFIG_SH73A0) || \
- defined(CONFIG_R8A7740)
+#if defined(CONFIG_R8A7740)
#if defined(CONFIG_CPU_SH7721) || \
defined(CONFIG_SH73A0)
#define SCIF_FNS(name, scif_offset, scif_size) \
@@ -323,8 +319,7 @@ static inline void sci_##name##_out(struct uart_port *port,\
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#endif
-#if defined(CONFIG_CPU_SH7721) || \
- defined(CONFIG_SH73A0)
+#if defined(CONFIG_CPU_SH7721)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
@@ -477,7 +472,6 @@ static inline int sci_rxd_in(struct uart_port *port)
#if defined(CONFIG_CPU_SH7780)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SH7721) || \
- defined(CONFIG_SH73A0) || \
defined(CONFIG_R8A7740)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SH7723)
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 65/87] sh4: Drop unused pci_sh7780 driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (63 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 64/87] rmobile: Drop CONFIG_SH73A0 and associated code Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 66/87] Drop ubsha1 tool Simon Glass
` (22 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/sh/include/asm/pci.h | 2 -
drivers/pci/Makefile | 1 -
drivers/pci/pci_sh7780.c | 92 ---------------------------------------
3 files changed, 95 deletions(-)
delete mode 100644 drivers/pci/pci_sh7780.c
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 5d79d0ec58e..18b95ff5cfb 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -13,8 +13,6 @@
#include <pci.h>
#if defined(CONFIG_SH7751_PCI)
int pci_sh7751_init(struct pci_controller *hose);
-#elif defined(CONFIG_SH7780_PCI)
-int pci_sh7780_init(struct pci_controller *hose);
#else
#error "Not support PCI."
#endif
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index d393f1ba031..49506e7ba59 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_PCI_MVEBU) += pci_mvebu.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCI_RCAR_GEN3) += pci-rcar-gen3.o
obj-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
-obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
obj-$(CONFIG_PCI_TEGRA) += pci_tegra.o
obj-$(CONFIG_PCIE_IPROC) += pcie_iproc.o
obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
diff --git a/drivers/pci/pci_sh7780.c b/drivers/pci/pci_sh7780.c
deleted file mode 100644
index 7533286c015..00000000000
--- a/drivers/pci/pci_sh7780.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SH7780 PCI Controller (PCIC) for U-Boot.
- * (C) Dustin McIntire (dustin@sensoria.com)
- * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
- */
-
-#include <common.h>
-#include <linux/delay.h>
-
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/pci.h>
-#include <asm/io.h>
-
-#define SH7780_VENDOR_ID 0x1912
-#define SH7780_DEVICE_ID 0x0002
-#define SH7780_PCICR_PREFIX 0xA5000000
-#define SH7780_PCICR_PFCS 0x00000800
-#define SH7780_PCICR_FTO 0x00000400
-#define SH7780_PCICR_PFE 0x00000200
-#define SH7780_PCICR_TBS 0x00000100
-#define SH7780_PCICR_ARBM 0x00000040
-#define SH7780_PCICR_IOCS 0x00000004
-#define SH7780_PCICR_PRST 0x00000002
-#define SH7780_PCICR_CFIN 0x00000001
-
-#define p4_in(addr) (*(vu_long *)addr)
-#define p4_out(data, addr) (*(vu_long *)addr) = (data)
-#define p4_inw(addr) (*(vu_short *)addr)
-#define p4_outw(data, addr) (*(vu_short *)addr) = (data)
-
-int pci_sh4_read_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32 *value)
-{
- u32 par_data = PCI_CONF1_ADDRESS(PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), offset);
-
- p4_out(par_data, SH7780_PCIPAR);
- *value = p4_in(SH7780_PCIPDR);
-
- return 0;
-}
-
-int pci_sh4_write_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32 value)
-{
- u32 par_data = PCI_CONF1_ADDRESS(PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), offset);
-
- p4_out(par_data, SH7780_PCIPAR);
- p4_out(value, SH7780_PCIPDR);
- return 0;
-}
-
-int pci_sh7780_init(struct pci_controller *hose)
-{
- p4_out(0x01, SH7780_PCIECR);
-
- if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID
- && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID) {
- printf("PCI: Unknown PCI host bridge.\n");
- return -1;
- }
- printf("PCI: SH7780 PCI host bridge found.\n");
-
- /* Toggle PCI reset pin */
- p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_PRST), SH7780_PCICR);
- udelay(100000);
- p4_out(SH7780_PCICR_PREFIX, SH7780_PCICR);
- p4_outw(0x0047, SH7780_PCICMD);
-
- p4_out(CONFIG_SH7780_PCI_LSR, SH7780_PCILSR0);
- p4_out(CONFIG_SH7780_PCI_LAR, SH7780_PCILAR0);
- p4_out(0x00000000, SH7780_PCILSR1);
- p4_out(0, SH7780_PCILAR1);
- p4_out(CONFIG_SH7780_PCI_BAR, SH7780_PCIMBAR0);
- p4_out(0x00000000, SH7780_PCIMBAR1);
-
- p4_out(0xFD000000, SH7780_PCIMBR0);
- p4_out(0x00FC0000, SH7780_PCIMBMR0);
-
- /* if use Operand Cache then enable PCICSCR Soonp bits. */
- p4_out(0x08000000, SH7780_PCICSAR0);
- p4_out(0x0000001B, SH7780_PCICSCR0); /* Snoop bit :On */
-
- p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | SH7780_PCICR_ARBM
- | SH7780_PCICR_FTO | SH7780_PCICR_PFCS | SH7780_PCICR_PFE),
- SH7780_PCICR);
-
- pci_sh4_init(hose);
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 66/87] Drop ubsha1 tool
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (64 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 65/87] sh4: Drop unused pci_sh7780 driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 67/87] arm: Rename STM32MP13x Simon Glass
` (21 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This seems to have been used by ppc4xx which was removed a while back.
The Kconfig does not exist so it is never built. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 3 --
tools/.gitignore | 1 -
tools/Makefile | 6 ----
tools/ubsha1.c | 83 ------------------------------------------------
4 files changed, 93 deletions(-)
delete mode 100644 tools/ubsha1.c
diff --git a/Makefile b/Makefile
index 21d62f66367..20a20e00d60 100644
--- a/Makefile
+++ b/Makefile
@@ -1450,9 +1450,6 @@ u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
$(BOARD_SIZE_CHECK)
-u-boot.sha1: u-boot.bin
- tools/ubsha1 u-boot.bin
-
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
diff --git a/tools/.gitignore b/tools/.gitignore
index 28e8ce2a07a..788ea260a07 100644
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -33,7 +33,6 @@
/relocate-rela
/spl_size_limit
/sunxi-spl-image-builder
-/ubsha1
/update_octeon_header
/version.h
/xway-swap-bytes
diff --git a/tools/Makefile b/tools/Makefile
index 2ee43dff542..0eadd8154a7 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -29,7 +29,6 @@ CONFIG_CMD_LOADS = y
CONFIG_CMD_NET = y
CONFIG_XWAY_SWAP_BYTES = y
CONFIG_NETCONSOLE = y
-CONFIG_SHA1_CHECK_UB_IMG = y
CONFIG_ARCH_SUNXI = y
endif
@@ -217,11 +216,6 @@ hostprogs-$(CONFIG_ARCH_SUNXI) += sunxi-spl-image-builder
sunxi-spl-image-builder-objs := sunxi-spl-image-builder.o lib/bch.o
hostprogs-$(CONFIG_NETCONSOLE) += ncb
-hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1
-
-ubsha1-objs := os_support.o ubsha1.o lib/sha1.o
-
-HOSTCFLAGS_ubsha1.o := -pedantic
hostprogs-$(CONFIG_ARCH_KIRKWOOD) += kwboot
hostprogs-$(CONFIG_ARCH_MVEBU) += kwboot
diff --git a/tools/ubsha1.c b/tools/ubsha1.c
deleted file mode 100644
index 90a6f3f59d2..00000000000
--- a/tools/ubsha1.c
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007
- * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
- */
-
-#include "os_support.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <u-boot/sha1.h>
-
-int main (int argc, char **argv)
-{
- unsigned char output[20];
- int i, len;
-
- char *imagefile;
- char *cmdname = *argv;
- unsigned char *ptr;
- unsigned char *data;
- struct stat sbuf;
- unsigned char *ptroff;
- int ifd;
- int off;
-
- if (argc > 1) {
- imagefile = argv[1];
- ifd = open (imagefile, O_RDWR|O_BINARY);
- if (ifd < 0) {
- fprintf (stderr, "%s: Can't open %s: %s\n",
- cmdname, imagefile, strerror(errno));
- exit (EXIT_FAILURE);
- }
- if (fstat (ifd, &sbuf) < 0) {
- fprintf (stderr, "%s: Can't stat %s: %s\n",
- cmdname, imagefile, strerror(errno));
- exit (EXIT_FAILURE);
- }
- len = sbuf.st_size;
- ptr = (unsigned char *)mmap(0, len,
- PROT_READ, MAP_SHARED, ifd, 0);
- if (ptr == (unsigned char *)MAP_FAILED) {
- fprintf (stderr, "%s: Can't read %s: %s\n",
- cmdname, imagefile, strerror(errno));
- exit (EXIT_FAILURE);
- }
-
- /* create a copy, so we can blank out the sha1 sum */
- data = malloc (len);
- memcpy (data, ptr, len);
- off = SHA1_SUM_POS;
- ptroff = &data[len + off];
- for (i = 0; i < SHA1_SUM_LEN; i++) {
- ptroff[i] = 0;
- }
-
- sha1_csum ((unsigned char *) data, len, (unsigned char *)output);
-
- printf ("U-Boot sum:\n");
- for (i = 0; i < 20 ; i++) {
- printf ("%02X ", output[i]);
- }
- printf ("\n");
- /* overwrite the sum in the bin file, with the actual */
- lseek (ifd, SHA1_SUM_POS, SEEK_END);
- if (write (ifd, output, SHA1_SUM_LEN) != SHA1_SUM_LEN) {
- fprintf (stderr, "%s: Can't write %s: %s\n",
- cmdname, imagefile, strerror(errno));
- exit (EXIT_FAILURE);
- }
-
- free (data);
- (void) munmap((void *)ptr, len);
- (void) close (ifd);
- }
-
- return EXIT_SUCCESS;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 67/87] arm: Rename STM32MP13x
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (65 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 66/87] Drop ubsha1 tool Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 68/87] arm: Rename STM32MP15x Simon Glass
` (20 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Albert Aribaud
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/dts/Makefile | 2 +-
arch/arm/mach-stm32mp/Kconfig | 4 ++--
arch/arm/mach-stm32mp/Kconfig.13x | 4 ++--
arch/arm/mach-stm32mp/Makefile | 2 +-
arch/arm/mach-stm32mp/cmd_stm32key.c | 10 +++++-----
arch/arm/mach-stm32mp/fdt.c | 4 ++--
arch/arm/mach-stm32mp/include/mach/stm32.h | 6 +++---
board/st/common/Kconfig | 2 +-
board/st/stm32mp1/Kconfig | 2 +-
configs/stm32mp13_defconfig | 4 ++--
drivers/clk/stm32/Kconfig | 2 +-
11 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index cd5b56034d5..85adbf0cb2a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1216,7 +1216,7 @@ dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
-dtb-$(CONFIG_STM32MP13x) += \
+dtb-$(CONFIG_STM32MP13X) += \
stm32mp135f-dk.dtb
dtb-$(CONFIG_STM32MP15x) += \
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index db47baba6d1..cf3196b3b3a 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -37,7 +37,7 @@ choice
prompt "Select STMicroelectronics STM32MPxxx Soc"
default STM32MP15x
-config STM32MP13x
+config STM32MP13X
bool "Support STMicroelectronics STM32MP13x Soc"
select ARM_SMCCC
select CPU_V7A
@@ -103,7 +103,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
config STM32_ETZPC
bool "STM32 Extended TrustZone Protection"
- depends on STM32MP15x || STM32MP13x
+ depends on STM32MP15x || STM32MP13X
default y
imply BOOTP_SERVERIP
help
diff --git a/arch/arm/mach-stm32mp/Kconfig.13x b/arch/arm/mach-stm32mp/Kconfig.13x
index acc02a5a187..4d74b35055b 100644
--- a/arch/arm/mach-stm32mp/Kconfig.13x
+++ b/arch/arm/mach-stm32mp/Kconfig.13x
@@ -1,10 +1,10 @@
-if STM32MP13x
+if STM32MP13X
choice
prompt "STM32MP13x board select"
optional
-config TARGET_ST_STM32MP13x
+config TARGET_ST_STM32MP13X
bool "STMicroelectronics STM32MP13x boards"
imply BOOTSTAGE
imply CMD_BOOTSTAGE
diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index a19b2797c8b..90c7c121ec4 100644
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -8,7 +8,7 @@ obj-y += dram_init.o
obj-y += syscon.o
obj-y += bsec.o
-obj-$(CONFIG_STM32MP13x) += stm32mp13x.o
+obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
diff --git a/arch/arm/mach-stm32mp/cmd_stm32key.c b/arch/arm/mach-stm32mp/cmd_stm32key.c
index 85be8e23bdb..96407cd9b18 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32key.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32key.c
@@ -18,7 +18,7 @@
* STM32MP13x: 0b111111 = 0x3F for OTP_SECURED closed device
*/
#define STM32_OTP_CLOSE_ID 0
-#define STM32_OTP_STM32MP13x_CLOSE_MASK 0x3F
+#define STM32_OTP_STM32MP13X_CLOSE_MASK 0x3F
#define STM32_OTP_STM32MP15x_CLOSE_MASK BIT(6)
/* PKH is the first element of the key list */
@@ -60,7 +60,7 @@ static u8 stm32key_index;
static u8 get_key_nb(void)
{
- if (IS_ENABLED(CONFIG_STM32MP13x))
+ if (IS_ENABLED(CONFIG_STM32MP13X))
return ARRAY_SIZE(stm32mp13_list);
if (IS_ENABLED(CONFIG_STM32MP15x))
@@ -69,7 +69,7 @@ static u8 get_key_nb(void)
static const struct stm32key *get_key(u8 index)
{
- if (IS_ENABLED(CONFIG_STM32MP13x))
+ if (IS_ENABLED(CONFIG_STM32MP13X))
return &stm32mp13_list[index];
if (IS_ENABLED(CONFIG_STM32MP15x))
@@ -78,8 +78,8 @@ static const struct stm32key *get_key(u8 index)
static u32 get_otp_close_mask(void)
{
- if (IS_ENABLED(CONFIG_STM32MP13x))
- return STM32_OTP_STM32MP13x_CLOSE_MASK;
+ if (IS_ENABLED(CONFIG_STM32MP13X))
+ return STM32_OTP_STM32MP13X_CLOSE_MASK;
if (IS_ENABLED(CONFIG_STM32MP15x))
return STM32_OTP_STM32MP15x_CLOSE_MASK;
diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c
index 3b4c05d7451..6b69542ecfc 100644
--- a/arch/arm/mach-stm32mp/fdt.c
+++ b/arch/arm/mach-stm32mp/fdt.c
@@ -270,7 +270,7 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node)
int offset, shift;
u32 addr, status, decprot[ETZPC_DECPROT_NB];
- if (IS_ENABLED(CONFIG_STM32MP13x)) {
+ if (IS_ENABLED(CONFIG_STM32MP13X)) {
array = stm32mp13_ip_addr;
array_size = ARRAY_SIZE(stm32mp13_ip_addr);
}
@@ -491,7 +491,7 @@ int ft_system_setup(void *blob, struct bd_info *bd)
cpu = get_cpu_type();
get_soc_name(name);
- if (IS_ENABLED(CONFIG_STM32MP13x))
+ if (IS_ENABLED(CONFIG_STM32MP13X))
stm32mp13_fdt_fixup(blob, soc, cpu, name);
if (IS_ENABLED(CONFIG_STM32MP15x)) {
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index c85ae6a34ee..1e1f694cb62 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -32,7 +32,7 @@
#define STM32_USART1_BASE 0x5C000000
#define STM32_USART2_BASE 0x4000E000
#endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
#define STM32_USART1_BASE 0x4c000000
#define STM32_USART2_BASE 0x4c001000
#endif
@@ -130,7 +130,7 @@ enum boot_device {
#define TAMP_COPRO_STATE_CRASH 5
#endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
#define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(31)
#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(30)
#endif
@@ -167,7 +167,7 @@ enum forced_boot_mode {
#define BSEC_OTP_MAC 57
#define BSEC_OTP_BOARD 59
#endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
#define BSEC_OTP_RPN 1
#define BSEC_OTP_SERIAL 13
#define BSEC_OTP_MAC 57
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
index aba3590866e..ba17d3158d1 100644
--- a/board/st/common/Kconfig
+++ b/board/st/common/Kconfig
@@ -1,7 +1,7 @@
config CMD_STBOARD
bool "stboard - command for OTP board information"
depends on ARCH_STM32MP
- default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x
+ default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13X
help
This compile the stboard command to
read and write the board in the OTP.
diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
index 6ab8f80fa45..7d0d41bfea0 100644
--- a/board/st/stm32mp1/Kconfig
+++ b/board/st/stm32mp1/Kconfig
@@ -12,7 +12,7 @@ config SYS_CONFIG_NAME
source "board/st/common/Kconfig"
endif
-if TARGET_ST_STM32MP13x
+if TARGET_ST_STM32MP13X
config SYS_BOARD
default "stm32mp1"
diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index ab824808f9d..7b9718400e8 100644
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -5,10 +5,10 @@ CONFIG_SYS_MALLOC_F_LEN=0x180000
CONFIG_ENV_OFFSET=0x900000
CONFIG_DEFAULT_DEVICE_TREE="stm32mp135f-dk"
CONFIG_SYS_PROMPT="STM32MP> "
-CONFIG_STM32MP13x=y
+CONFIG_STM32MP13X=y
CONFIG_DDR_CACHEABLE_SIZE=0x10000000
CONFIG_CMD_STM32KEY=y
-CONFIG_TARGET_ST_STM32MP13x=y
+CONFIG_TARGET_ST_STM32MP13X=y
CONFIG_ENV_OFFSET_REDUND=0x940000
# CONFIG_ARMV7_NONSEC is not set
CONFIG_SYS_LOAD_ADDR=0xc2000000
diff --git a/drivers/clk/stm32/Kconfig b/drivers/clk/stm32/Kconfig
index 7a34ea23c38..7dbddd032b8 100644
--- a/drivers/clk/stm32/Kconfig
+++ b/drivers/clk/stm32/Kconfig
@@ -31,7 +31,7 @@ config CLK_STM32MP1
config CLK_STM32MP13
bool "Enable RCC clock driver for STM32MP13"
depends on ARCH_STM32MP && CLK
- default y if STM32MP13x
+ default y if STM32MP13X
select CLK_STM32_CORE
help
Enable the STM32 clock (RCC) driver. Enable support for
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 68/87] arm: Rename STM32MP15x
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (66 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 67/87] arm: Rename STM32MP13x Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 69/87] sysreset: at91: Correct Makefile rule for SYSRESET_AT91 Simon Glass
` (19 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Albert Aribaud
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/dts/Makefile | 2 +-
arch/arm/dts/stm32mp15-u-boot.dtsi | 2 +-
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 4 ++--
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 4 ++--
arch/arm/mach-stm32mp/Kconfig | 6 +++---
arch/arm/mach-stm32mp/Kconfig.15x | 6 +++---
arch/arm/mach-stm32mp/Makefile | 2 +-
arch/arm/mach-stm32mp/cmd_stm32key.c | 10 +++++-----
.../mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c | 2 +-
.../arm/mach-stm32mp/cmd_stm32prog/stm32prog.c | 4 ++--
.../arm/mach-stm32mp/cmd_stm32prog/stm32prog.h | 6 +++---
arch/arm/mach-stm32mp/fdt.c | 8 ++++----
arch/arm/mach-stm32mp/include/mach/stm32.h | 10 +++++-----
arch/arm/mach-stm32mp/include/mach/stm32prog.h | 2 +-
board/st/common/Kconfig | 14 +++++++-------
board/st/common/stm32mp_mtdparts.c | 18 +++++++++---------
board/st/stm32mp1/Kconfig | 2 +-
board/st/stm32mp1/stm32mp1.c | 6 +++---
configs/stm32mp15_basic_defconfig | 2 +-
configs/stm32mp15_defconfig | 2 +-
configs/stm32mp15_trusted_defconfig | 4 ++--
drivers/clk/stm32/Kconfig | 2 +-
22 files changed, 59 insertions(+), 59 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 85adbf0cb2a..21fff28218e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1219,7 +1219,7 @@ dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
dtb-$(CONFIG_STM32MP13X) += \
stm32mp135f-dk.dtb
-dtb-$(CONFIG_STM32MP15x) += \
+dtb-$(CONFIG_STM32MP15X) += \
stm32mp157a-dk1.dtb \
stm32mp157a-dk1-scmi.dtb \
stm32mp157a-icore-stm32mp1-ctouch2.dtb \
diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi
index d5c87d29d88..955598b1c0b 100644
--- a/arch/arm/dts/stm32mp15-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -206,7 +206,7 @@
resets = <&rcc UART8_R>;
};
-#if defined(CONFIG_STM32MP15x_STM32IMAGE)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE)
&binman {
u-boot-stm32 {
filename = "u-boot.stm32";
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index 15a04ae927e..11062951923 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -21,13 +21,13 @@
st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
config {
u-boot,mmc-env-partition = "ssbl";
};
#endif
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index 408abaf52fa..cea661bce68 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -20,13 +20,13 @@
st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
config {
u-boot,mmc-env-partition = "ssbl";
};
#endif
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index cf3196b3b3a..f88b7dbffbd 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -35,7 +35,7 @@ config ENV_SIZE
choice
prompt "Select STMicroelectronics STM32MPxxx Soc"
- default STM32MP15x
+ default STM32MP15X
config STM32MP13X
bool "Support STMicroelectronics STM32MP13x Soc"
@@ -55,7 +55,7 @@ config STM32MP13X
support of STMicroelectronics SOC STM32MP13x family
STMicroelectronics MPU with core ARMv7
-config STM32MP15x
+config STM32MP15X
bool "Support STMicroelectronics STM32MP15x Soc"
select ARCH_SUPPORT_PSCI
select BINMAN
@@ -103,7 +103,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
config STM32_ETZPC
bool "STM32 Extended TrustZone Protection"
- depends on STM32MP15x || STM32MP13X
+ depends on STM32MP15X || STM32MP13X
default y
imply BOOTP_SERVERIP
help
diff --git a/arch/arm/mach-stm32mp/Kconfig.15x b/arch/arm/mach-stm32mp/Kconfig.15x
index 1d32f8bf339..71c14eb4955 100644
--- a/arch/arm/mach-stm32mp/Kconfig.15x
+++ b/arch/arm/mach-stm32mp/Kconfig.15x
@@ -1,6 +1,6 @@
-if STM32MP15x
+if STM32MP15X
-config STM32MP15x_STM32IMAGE
+config STM32MP15X_STM32IMAGE
bool "Support STM32 image for generated U-Boot image"
depends on TFABOOT
help
@@ -11,7 +11,7 @@ choice
prompt "STM32MP15x board select"
optional
-config TARGET_ST_STM32MP15x
+config TARGET_ST_STM32MP15X
bool "STMicroelectronics STM32MP15x boards"
imply BOOTSTAGE
imply CMD_BOOTSTAGE
diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index 90c7c121ec4..a40f8dc25a8 100644
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -9,7 +9,7 @@ obj-y += syscon.o
obj-y += bsec.o
obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
-obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
+obj-$(CONFIG_STM32MP15X) += stm32mp15x.o
obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
ifdef CONFIG_SPL_BUILD
diff --git a/arch/arm/mach-stm32mp/cmd_stm32key.c b/arch/arm/mach-stm32mp/cmd_stm32key.c
index 96407cd9b18..b2e6421e9a2 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32key.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32key.c
@@ -19,7 +19,7 @@
*/
#define STM32_OTP_CLOSE_ID 0
#define STM32_OTP_STM32MP13X_CLOSE_MASK 0x3F
-#define STM32_OTP_STM32MP15x_CLOSE_MASK BIT(6)
+#define STM32_OTP_STM32MP15X_CLOSE_MASK BIT(6)
/* PKH is the first element of the key list */
#define STM32KEY_PKH 0
@@ -63,7 +63,7 @@ static u8 get_key_nb(void)
if (IS_ENABLED(CONFIG_STM32MP13X))
return ARRAY_SIZE(stm32mp13_list);
- if (IS_ENABLED(CONFIG_STM32MP15x))
+ if (IS_ENABLED(CONFIG_STM32MP15X))
return ARRAY_SIZE(stm32mp15_list);
}
@@ -72,7 +72,7 @@ static const struct stm32key *get_key(u8 index)
if (IS_ENABLED(CONFIG_STM32MP13X))
return &stm32mp13_list[index];
- if (IS_ENABLED(CONFIG_STM32MP15x))
+ if (IS_ENABLED(CONFIG_STM32MP15X))
return &stm32mp15_list[index];
}
@@ -81,8 +81,8 @@ static u32 get_otp_close_mask(void)
if (IS_ENABLED(CONFIG_STM32MP13X))
return STM32_OTP_STM32MP13X_CLOSE_MASK;
- if (IS_ENABLED(CONFIG_STM32MP15x))
- return STM32_OTP_STM32MP15x_CLOSE_MASK;
+ if (IS_ENABLED(CONFIG_STM32MP15X))
+ return STM32_OTP_STM32MP15X_CLOSE_MASK;
}
static int get_misc_dev(struct udevice **dev)
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
index a8372356b0e..c9f99259054 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
@@ -180,7 +180,7 @@ U_BOOT_CMD(stm32prog, 5, 0, do_stm32prog,
" <size> = size of flashlayout (optional for image with STM32 header)\n"
);
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
bool stm32prog_get_tee_partitions(void)
{
if (stm32prog_data)
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
index 89552d2ad10..4b75397b1cc 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
@@ -999,7 +999,7 @@ static int treat_partition_list(struct stm32prog_data *data)
INIT_LIST_HEAD(&data->dev[j].part_list);
}
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
data->tee_detected = false;
#endif
data->fsbl_nor_detected = false;
@@ -1055,7 +1055,7 @@ static int treat_partition_list(struct stm32prog_data *data)
/* fallthrough */
case STM32PROG_NAND:
case STM32PROG_SPI_NAND:
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
if (!data->tee_detected &&
!strncmp(part->name, "tee", 3))
data->tee_detected = true;
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
index 58f4b96fa75..bcbbc2d5a35 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
@@ -20,8 +20,8 @@
#define DEFAULT_ADDRESS 0xFFFFFFFF
#define CMD_SIZE 512
-/* SMC is only supported in SPMIN for STM32MP15x */
-#ifdef CONFIG_STM32MP15x
+/* SMC is only supported in SPMIN for STM32MP15X */
+#ifdef CONFIG_STM32MP15X
#define OTP_SIZE_SMC 1024
#else
#define OTP_SIZE_SMC 0
@@ -149,7 +149,7 @@ struct stm32prog_data {
struct stm32prog_dev_t dev[STM32PROG_MAX_DEV]; /* array of device */
int part_nb; /* nb of partition */
struct stm32prog_part_t *part_array; /* array of partition */
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
bool tee_detected;
#endif
bool fsbl_nor_detected;
diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c
index 6b69542ecfc..218d9ef282a 100644
--- a/arch/arm/mach-stm32mp/fdt.c
+++ b/arch/arm/mach-stm32mp/fdt.c
@@ -275,7 +275,7 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node)
array_size = ARRAY_SIZE(stm32mp13_ip_addr);
}
- if (IS_ENABLED(CONFIG_STM32MP15x)) {
+ if (IS_ENABLED(CONFIG_STM32MP15X)) {
array = stm32mp15_ip_addr;
array_size = ARRAY_SIZE(stm32mp15_ip_addr);
}
@@ -494,7 +494,7 @@ int ft_system_setup(void *blob, struct bd_info *bd)
if (IS_ENABLED(CONFIG_STM32MP13X))
stm32mp13_fdt_fixup(blob, soc, cpu, name);
- if (IS_ENABLED(CONFIG_STM32MP15x)) {
+ if (IS_ENABLED(CONFIG_STM32MP15X)) {
stm32mp15_fdt_fixup(blob, soc, cpu, name);
/*
@@ -502,10 +502,10 @@ int ft_system_setup(void *blob, struct bd_info *bd)
* copied from U-Boot device tree by optee_copy_fdt_nodes
* when OP-TEE is not detected (probe failed)
* these OP-TEE nodes are present in <board>-u-boot.dtsi
- * under CONFIG_STM32MP15x_STM32IMAGE only for compatibility
+ * under CONFIG_STM32MP15X_STM32IMAGE only for compatibility
* when FIP is not used by TF-A
*/
- if (CONFIG_IS_ENABLED(STM32MP15x_STM32IMAGE) &&
+ if (CONFIG_IS_ENABLED(STM32MP15X_STM32IMAGE) &&
!tee_find_device(NULL, NULL, NULL, NULL))
stm32_fdt_disable_optee(blob);
}
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index 1e1f694cb62..8f54b8ca94f 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -17,7 +17,7 @@
#define STM32_RCC_BASE 0x50000000
#define STM32_PWR_BASE 0x50001000
#define STM32_SYSCFG_BASE 0x50020000
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define STM32_DBGMCU_BASE 0x50081000
#endif
#define STM32_FMC2_BASE 0x58002000
@@ -28,7 +28,7 @@
#define STM32_STGEN_BASE 0x5C008000
#define STM32_TAMP_BASE 0x5C00A000
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define STM32_USART1_BASE 0x5C000000
#define STM32_USART2_BASE 0x4000E000
#endif
@@ -47,7 +47,7 @@
#define STM32_SDMMC2_BASE 0x58007000
#define STM32_SDMMC3_BASE 0x48004000
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define STM32_SYSRAM_BASE 0x2FFC0000
#define STM32_SYSRAM_SIZE SZ_256K
#endif
@@ -109,7 +109,7 @@ enum boot_device {
/* TAMP registers */
#define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x)
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define TAMP_BACKUP_MAGIC_NUMBER TAMP_BACKUP_REGISTER(4)
#define TAMP_BACKUP_BRANCH_ADDRESS TAMP_BACKUP_REGISTER(5)
#define TAMP_FWU_BOOT_INFO_REG TAMP_BACKUP_REGISTER(10)
@@ -160,7 +160,7 @@ enum forced_boot_mode {
#define STM32_BSEC_LOCK(id) (STM32_BSEC_LOCK_OFFSET + (id) * 4)
/* BSEC OTP index */
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define BSEC_OTP_RPN 1
#define BSEC_OTP_SERIAL 13
#define BSEC_OTP_PKG 16
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32prog.h b/arch/arm/mach-stm32mp/include/mach/stm32prog.h
index 99be4e1d656..573dffe6dd6 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32prog.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32prog.h
@@ -11,7 +11,7 @@ int stm32prog_read_medium_virt(struct dfu_entity *dfu, u64 offset,
void *buf, long *len);
int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size);
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
bool stm32prog_get_tee_partitions(void);
#endif
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
index ba17d3158d1..20e28f9af82 100644
--- a/board/st/common/Kconfig
+++ b/board/st/common/Kconfig
@@ -1,14 +1,14 @@
config CMD_STBOARD
bool "stboard - command for OTP board information"
depends on ARCH_STM32MP
- default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13X
+ default y if TARGET_ST_STM32MP15X || TARGET_ST_STM32MP13X
help
This compile the stboard command to
read and write the board in the OTP.
config MTDPARTS_NAND0_BOOT
string "mtd boot partitions for nand0"
- default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || \
+ default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15X_STM32IMAGE || \
!TFABOOT
default "2m(fsbl),4m(fip1),4m(fip2)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
@@ -23,7 +23,7 @@ config MTDPARTS_NAND0_BOOT
config MTDPARTS_NAND0_TEE
string "mtd tee partitions for nand0"
default "512k(teeh),512k(teed),512k(teex)"
- depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
+ depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15X_STM32IMAGE
help
This define the tee partitions added in mtparts dynamically
when tee is supported with boot from nand0.
@@ -32,7 +32,7 @@ config MTDPARTS_NAND0_TEE
config MTDPARTS_NOR0_BOOT
string "mtd boot partitions for nor0"
- default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)" if STM32MP15x_STM32IMAGE || \
+ default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)" if STM32MP15X_STM32IMAGE || \
!TFABOOT
default "256k(fsbl1),256k(fsbl2),4m(fip),512k(u-boot-env)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
@@ -46,14 +46,14 @@ config MTDPARTS_NOR0_BOOT
config MTDPARTS_NOR0_TEE
string "mtd tee partitions for nor0"
default "256k(teeh),512k(teed),256k(teex)"
- depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
+ depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15X_STM32IMAGE
help
This define the tee partitions added in mtparts dynamically
when tee is supported with boot from nor0.
config MTDPARTS_SPINAND0_BOOT
string "mtd boot partitions for spi-nand0"
- default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || !TFABOOT
+ default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15X_STM32IMAGE || !TFABOOT
default "2m(fsbl),4m(fip1),4m(fip2)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
help
@@ -66,7 +66,7 @@ config MTDPARTS_SPINAND0_BOOT
config MTDPARTS_SPINAND0_TEE
string "mtd tee partitions for spi-nand0"
default "512k(teeh),512k(teed),512k(teex)"
- depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
+ depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15X_STM32IMAGE
help
This define the tee partitions added in mtparts dynamically
when tee is supported with boot from spi-nand0,
diff --git a/board/st/common/stm32mp_mtdparts.c b/board/st/common/stm32mp_mtdparts.c
index 18878424c7a..bc2ce600287 100644
--- a/board/st/common/stm32mp_mtdparts.c
+++ b/board/st/common/stm32mp_mtdparts.c
@@ -11,7 +11,7 @@
#include <log.h>
#include <mtd.h>
#include <mtd_node.h>
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
#include <tee.h>
#endif
#include <asm/arch/stm32prog.h>
@@ -33,7 +33,7 @@ static void board_set_mtdparts(const char *dev,
char *mtdids,
char *mtdparts,
const char *boot,
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
const char *tee,
#endif
const char *user)
@@ -59,7 +59,7 @@ static void board_set_mtdparts(const char *dev,
strncat(mtdparts, ",", MTDPARTS_LEN);
}
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
if (tee) {
strncat(mtdparts, tee, MTDPARTS_LEN);
strncat(mtdparts, ",", MTDPARTS_LEN);
@@ -77,7 +77,7 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
static char ids[MTDIDS_LEN + 1];
static bool mtd_initialized;
bool nor, nand, spinand, serial;
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
bool tee = false;
#endif
@@ -97,7 +97,7 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
case BOOT_SERIAL_USB:
serial = true;
if (CONFIG_IS_ENABLED(CMD_STM32PROG)) {
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
tee = stm32prog_get_tee_partitions();
#endif
nor = stm32prog_get_fsbl_nor();
@@ -118,7 +118,7 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
break;
}
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
if (!serial && tee_find_device(NULL, NULL, NULL, NULL))
tee = true;
#endif
@@ -138,7 +138,7 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
if (!IS_ERR_OR_NULL(mtd)) {
board_set_mtdparts("nand0", ids, parts,
CONFIG_MTDPARTS_NAND0_BOOT,
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
!nor && tee ? CONFIG_MTDPARTS_NAND0_TEE : NULL,
#endif
"-(UBI)");
@@ -151,7 +151,7 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
if (!IS_ERR_OR_NULL(mtd)) {
board_set_mtdparts("spi-nand0", ids, parts,
CONFIG_MTDPARTS_SPINAND0_BOOT,
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
!nor && tee ? CONFIG_MTDPARTS_SPINAND0_TEE : NULL,
#endif
"-(UBI)");
@@ -163,7 +163,7 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
if (!uclass_get_device(UCLASS_SPI_FLASH, 0, &dev)) {
board_set_mtdparts("nor0", ids, parts,
CONFIG_MTDPARTS_NOR0_BOOT,
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
tee ? CONFIG_MTDPARTS_NOR0_TEE : NULL,
#endif
"-(nor_user)");
diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
index 7d0d41bfea0..96de41546f1 100644
--- a/board/st/stm32mp1/Kconfig
+++ b/board/st/stm32mp1/Kconfig
@@ -1,4 +1,4 @@
-if TARGET_ST_STM32MP15x
+if TARGET_ST_STM32MP15X
config SYS_BOARD
default "stm32mp1"
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 47b3d1bf4c5..4536c1c673c 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -114,7 +114,7 @@ int checkboard(void)
int fdt_compat_len;
if (IS_ENABLED(CONFIG_TFABOOT)) {
- if (IS_ENABLED(CONFIG_STM32MP15x_STM32IMAGE))
+ if (IS_ENABLED(CONFIG_STM32MP15X_STM32IMAGE))
mode = "trusted - stm32image";
else
mode = "trusted";
@@ -616,7 +616,7 @@ error:
static bool board_is_stm32mp15x_dk2(void)
{
- if (CONFIG_IS_ENABLED(TARGET_ST_STM32MP15x) &&
+ if (CONFIG_IS_ENABLED(TARGET_ST_STM32MP15X) &&
of_machine_is_compatible("st,stm32mp157c-dk2"))
return true;
@@ -625,7 +625,7 @@ static bool board_is_stm32mp15x_dk2(void)
static bool board_is_stm32mp15x_ev1(void)
{
- if (CONFIG_IS_ENABLED(TARGET_ST_STM32MP15x) &&
+ if (CONFIG_IS_ENABLED(TARGET_ST_STM32MP15X) &&
(of_machine_is_compatible("st,stm32mp157a-ev1") ||
of_machine_is_compatible("st,stm32mp157c-ev1") ||
of_machine_is_compatible("st,stm32mp157d-ev1") ||
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 87e3b496048..ea03751c781 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -11,7 +11,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL=y
CONFIG_CMD_STM32KEY=y
CONFIG_TYPEC_STUSB160X=y
-CONFIG_TARGET_ST_STM32MP15x=y
+CONFIG_TARGET_ST_STM32MP15X=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
CONFIG_CMD_STM32PROG=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig
index 5dc00213a8f..54b80688c66 100644
--- a/configs/stm32mp15_defconfig
+++ b/configs/stm32mp15_defconfig
@@ -9,7 +9,7 @@ CONFIG_SYS_PROMPT="STM32MP> "
CONFIG_DDR_CACHEABLE_SIZE=0x10000000
CONFIG_CMD_STM32KEY=y
CONFIG_TYPEC_STUSB160X=y
-CONFIG_TARGET_ST_STM32MP15x=y
+CONFIG_TARGET_ST_STM32MP15X=y
CONFIG_ENV_OFFSET_REDUND=0x4C0000
CONFIG_CMD_STM32PROG=y
# CONFIG_ARMV7_NONSEC is not set
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index c1ad4dd5213..3d80f410507 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -9,8 +9,8 @@ CONFIG_SYS_PROMPT="STM32MP> "
CONFIG_DDR_CACHEABLE_SIZE=0x10000000
CONFIG_CMD_STM32KEY=y
CONFIG_TYPEC_STUSB160X=y
-CONFIG_STM32MP15x_STM32IMAGE=y
-CONFIG_TARGET_ST_STM32MP15x=y
+CONFIG_STM32MP15X_STM32IMAGE=y
+CONFIG_TARGET_ST_STM32MP15X=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
CONFIG_CMD_STM32PROG=y
# CONFIG_ARMV7_NONSEC is not set
diff --git a/drivers/clk/stm32/Kconfig b/drivers/clk/stm32/Kconfig
index 7dbddd032b8..c05015efe8b 100644
--- a/drivers/clk/stm32/Kconfig
+++ b/drivers/clk/stm32/Kconfig
@@ -23,7 +23,7 @@ config CLK_STM32_CORE
config CLK_STM32MP1
bool "Enable RCC clock driver for STM32MP15"
depends on ARCH_STM32MP && CLK
- default y if STM32MP15x
+ default y if STM32MP15X
help
Enable the STM32 clock (RCC) driver. Enable support for
manipulating STM32MP15's on-SoC clocks.
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 69/87] sysreset: at91: Correct Makefile rule for SYSRESET_AT91
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (67 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 68/87] arm: Rename STM32MP15x Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 70/87] gdsys: Drop unused fpga file Simon Glass
` (18 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Tom Rini, Simon Glass, Claudiu Beznea, Andreas Bießmann
The SPL_TPL part is in the wrong place. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 71d4393f846 ("sysreset: Add Atmel/Microchip sysreset driver")
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
(no changes since v1)
drivers/sysreset/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
index 0ed3bbf356a..40c876764af 100644
--- a/drivers/sysreset/Makefile
+++ b/drivers/sysreset/Makefile
@@ -20,6 +20,6 @@ obj-$(CONFIG_SYSRESET_TI_SCI) += sysreset-ti-sci.o
obj-$(CONFIG_SYSRESET_SYSCON) += sysreset_syscon.o
obj-$(CONFIG_SYSRESET_WATCHDOG) += sysreset_watchdog.o
obj-$(CONFIG_SYSRESET_RESETCTL) += sysreset_resetctl.o
-obj-$(CONFIG_SYSRESET_$(SPL_TPL_)AT91) += sysreset_at91.o
+obj-$(CONFIG_$(SPL_TPL_)SYSRESET_AT91) += sysreset_at91.o
obj-$(CONFIG_$(SPL_TPL_)SYSRESET_X86) += sysreset_x86.o
obj-$(CONFIG_TARGET_XTFPGA) += sysreset_xtfpga.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 70/87] gdsys: Drop unused fpga file
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (68 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 69/87] sysreset: at91: Correct Makefile rule for SYSRESET_AT91 Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 71/87] sh4: Drop unused kona_i2c driver Simon Glass
` (17 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used since CONFIG_SYS_FPGA_COMMON is not defined anywhere.
Drop the code and the Makefile rule.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/gdsys/common/Makefile | 1 -
board/gdsys/common/fpga.c | 28 ----------------------------
2 files changed, 29 deletions(-)
delete mode 100644 board/gdsys/common/fpga.c
diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile
index 553e2ca50ed..94cbf3c5cc1 100644
--- a/board/gdsys/common/Makefile
+++ b/board/gdsys/common/Makefile
@@ -3,7 +3,6 @@
# (C) Copyright 2007
# Stefan Roese, DENX Software Engineering, sr@denx.de.
-obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o
obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o
obj-$(CONFIG_TARGET_CONTROLCENTERDC) += dp501.o
obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o
diff --git a/board/gdsys/common/fpga.c b/board/gdsys/common/fpga.c
deleted file mode 100644
index 5ba6613ed56..00000000000
--- a/board/gdsys/common/fpga.c
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2013
- * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-#ifdef CONFIG_GDSYS_LEGACY_DRIVERS
-
-#include <common.h>
-#include <gdsys_fpga.h>
-
-#include <asm/io.h>
-
-int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
-{
- out_le16(reg, data);
-
- return 0;
-}
-
-int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data)
-{
- *data = in_le16(reg);
-
- return 0;
-}
-
-#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 71/87] sh4: Drop unused kona_i2c driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (69 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 70/87] gdsys: Drop unused fpga file Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 72/87] compulab: Drop CONFIG_TARGET_MCM_IMX8M_MINI Simon Glass
` (16 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Heiko Schocher
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
---
(no changes since v1)
drivers/i2c/Makefile | 1 -
drivers/i2c/kona_i2c.c | 728 -----------------------------------------
2 files changed, 729 deletions(-)
delete mode 100644 drivers/i2c/kona_i2c.c
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 920aafb91c5..cde0597290c 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o
obj-$(CONFIG_SYS_I2C_INTEL) += intel_i2c.o
obj-$(CONFIG_SYS_I2C_IMX_LPI2C) += imx_lpi2c.o
obj-$(CONFIG_SYS_I2C_IPROC) += iproc_i2c.o
-obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o
obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o
obj-$(CONFIG_SYS_I2C_MESON) += meson_i2c.o
obj-$(CONFIG_SYS_I2C_MICROCHIP) += i2c-microchip.o
diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c
deleted file mode 100644
index b9b0ff1c39e..00000000000
--- a/drivers/i2c/kona_i2c.c
+++ /dev/null
@@ -1,728 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Broadcom Corporation.
- *
- * NOTE: This driver should be converted to driver model before June 2017.
- * Please see doc/driver-model/i2c-howto.rst for instructions.
- */
-
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <asm/arch/sysmap.h>
-#include <asm/kona-common/clk.h>
-#include <i2c.h>
-
-/* Hardware register offsets and field defintions */
-#define CS_OFFSET 0x00000020
-#define CS_ACK_SHIFT 3
-#define CS_ACK_MASK 0x00000008
-#define CS_ACK_CMD_GEN_START 0x00000000
-#define CS_ACK_CMD_GEN_RESTART 0x00000001
-#define CS_CMD_SHIFT 1
-#define CS_CMD_CMD_NO_ACTION 0x00000000
-#define CS_CMD_CMD_START_RESTART 0x00000001
-#define CS_CMD_CMD_STOP 0x00000002
-#define CS_EN_SHIFT 0
-#define CS_EN_CMD_ENABLE_BSC 0x00000001
-
-#define TIM_OFFSET 0x00000024
-#define TIM_PRESCALE_SHIFT 6
-#define TIM_P_SHIFT 3
-#define TIM_NO_DIV_SHIFT 2
-#define TIM_DIV_SHIFT 0
-
-#define DAT_OFFSET 0x00000028
-
-#define TOUT_OFFSET 0x0000002c
-
-#define TXFCR_OFFSET 0x0000003c
-#define TXFCR_FIFO_FLUSH_MASK 0x00000080
-#define TXFCR_FIFO_EN_MASK 0x00000040
-
-#define IER_OFFSET 0x00000044
-#define IER_READ_COMPLETE_INT_MASK 0x00000010
-#define IER_I2C_INT_EN_MASK 0x00000008
-#define IER_FIFO_INT_EN_MASK 0x00000002
-#define IER_NOACK_EN_MASK 0x00000001
-
-#define ISR_OFFSET 0x00000048
-#define ISR_RESERVED_MASK 0xffffff60
-#define ISR_CMDBUSY_MASK 0x00000080
-#define ISR_READ_COMPLETE_MASK 0x00000010
-#define ISR_SES_DONE_MASK 0x00000008
-#define ISR_ERR_MASK 0x00000004
-#define ISR_TXFIFOEMPTY_MASK 0x00000002
-#define ISR_NOACK_MASK 0x00000001
-
-#define CLKEN_OFFSET 0x0000004c
-#define CLKEN_AUTOSENSE_OFF_MASK 0x00000080
-#define CLKEN_M_SHIFT 4
-#define CLKEN_N_SHIFT 1
-#define CLKEN_CLKEN_MASK 0x00000001
-
-#define FIFO_STATUS_OFFSET 0x00000054
-#define FIFO_STATUS_RXFIFO_EMPTY_MASK 0x00000004
-#define FIFO_STATUS_TXFIFO_EMPTY_MASK 0x00000010
-
-#define HSTIM_OFFSET 0x00000058
-#define HSTIM_HS_MODE_MASK 0x00008000
-#define HSTIM_HS_HOLD_SHIFT 10
-#define HSTIM_HS_HIGH_PHASE_SHIFT 5
-#define HSTIM_HS_SETUP_SHIFT 0
-
-#define PADCTL_OFFSET 0x0000005c
-#define PADCTL_PAD_OUT_EN_MASK 0x00000004
-
-#define RXFCR_OFFSET 0x00000068
-#define RXFCR_NACK_EN_SHIFT 7
-#define RXFCR_READ_COUNT_SHIFT 0
-#define RXFIFORDOUT_OFFSET 0x0000006c
-
-/* Locally used constants */
-#define MAX_RX_FIFO_SIZE 64U /* bytes */
-#define MAX_TX_FIFO_SIZE 64U /* bytes */
-
-#define I2C_TIMEOUT 100000 /* usecs */
-
-#define WAIT_INT_CHK 100 /* usecs */
-#if I2C_TIMEOUT % WAIT_INT_CHK
-#error I2C_TIMEOUT must be a multiple of WAIT_INT_CHK
-#endif
-
-/* Operations that can be commanded to the controller */
-enum bcm_kona_cmd_t {
- BCM_CMD_NOACTION = 0,
- BCM_CMD_START,
- BCM_CMD_RESTART,
- BCM_CMD_STOP,
-};
-
-/* Internal divider settings for standard mode, fast mode and fast mode plus */
-struct bus_speed_cfg {
- uint8_t time_m; /* Number of cycles for setup time */
- uint8_t time_n; /* Number of cycles for hold time */
- uint8_t prescale; /* Prescale divider */
- uint8_t time_p; /* Timing coefficient */
- uint8_t no_div; /* Disable clock divider */
- uint8_t time_div; /* Post-prescale divider */
-};
-
-static const struct bus_speed_cfg std_cfg_table[] = {
- [IC_SPEED_MODE_STANDARD] = {0x01, 0x01, 0x03, 0x06, 0x00, 0x02},
- [IC_SPEED_MODE_FAST] = {0x05, 0x01, 0x03, 0x05, 0x01, 0x02},
- [IC_SPEED_MODE_FAST_PLUS] = {0x01, 0x01, 0x03, 0x01, 0x01, 0x03},
-};
-
-struct bcm_kona_i2c_dev {
- void *base;
- uint speed;
- const struct bus_speed_cfg *std_cfg;
-};
-
-/* Keep these two defines in sync */
-#define DEF_SPD I2C_SPEED_STANDARD_RATE
-#define DEF_SPD_ENUM IC_SPEED_MODE_STANDARD
-
-#define DEF_DEVICE(num) \
-{(void *)CONFIG_SYS_I2C_BASE##num, DEF_SPD, &std_cfg_table[DEF_SPD_ENUM]}
-
-static struct bcm_kona_i2c_dev g_i2c_devs[CFG_SYS_MAX_I2C_BUS] = {
-#ifdef CONFIG_SYS_I2C_BASE0
- DEF_DEVICE(0),
-#endif
-#ifdef CONFIG_SYS_I2C_BASE1
- DEF_DEVICE(1),
-#endif
-#ifdef CONFIG_SYS_I2C_BASE2
- DEF_DEVICE(2),
-#endif
-#ifdef CONFIG_SYS_I2C_BASE3
- DEF_DEVICE(3),
-#endif
-#ifdef CONFIG_SYS_I2C_BASE4
- DEF_DEVICE(4),
-#endif
-#ifdef CONFIG_SYS_I2C_BASE5
- DEF_DEVICE(5),
-#endif
-};
-
-#define I2C_M_TEN 0x0010 /* ten bit address */
-#define I2C_M_RD 0x0001 /* read data */
-#define I2C_M_NOSTART 0x4000 /* no restart between msgs */
-
-struct kona_i2c_msg {
- uint16_t addr;
- uint16_t flags;
- uint16_t len;
- uint8_t *buf;
-};
-
-static void bcm_kona_i2c_send_cmd_to_ctrl(struct bcm_kona_i2c_dev *dev,
- enum bcm_kona_cmd_t cmd)
-{
- debug("%s, %d\n", __func__, cmd);
-
- switch (cmd) {
- case BCM_CMD_NOACTION:
- writel((CS_CMD_CMD_NO_ACTION << CS_CMD_SHIFT) |
- (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
- dev->base + CS_OFFSET);
- break;
-
- case BCM_CMD_START:
- writel((CS_ACK_CMD_GEN_START << CS_ACK_SHIFT) |
- (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
- (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
- dev->base + CS_OFFSET);
- break;
-
- case BCM_CMD_RESTART:
- writel((CS_ACK_CMD_GEN_RESTART << CS_ACK_SHIFT) |
- (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
- (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
- dev->base + CS_OFFSET);
- break;
-
- case BCM_CMD_STOP:
- writel((CS_CMD_CMD_STOP << CS_CMD_SHIFT) |
- (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
- dev->base + CS_OFFSET);
- break;
-
- default:
- printf("Unknown command %d\n", cmd);
- }
-}
-
-static void bcm_kona_i2c_enable_clock(struct bcm_kona_i2c_dev *dev)
-{
- writel(readl(dev->base + CLKEN_OFFSET) | CLKEN_CLKEN_MASK,
- dev->base + CLKEN_OFFSET);
-}
-
-static void bcm_kona_i2c_disable_clock(struct bcm_kona_i2c_dev *dev)
-{
- writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_CLKEN_MASK,
- dev->base + CLKEN_OFFSET);
-}
-
-/* Wait until at least one of the mask bit(s) are set */
-static unsigned long wait_for_int_timeout(struct bcm_kona_i2c_dev *dev,
- unsigned long time_left,
- uint32_t mask)
-{
- uint32_t status;
-
- while (time_left) {
- status = readl(dev->base + ISR_OFFSET);
-
- if ((status & ~ISR_RESERVED_MASK) == 0) {
- debug("Bogus I2C interrupt 0x%x\n", status);
- continue;
- }
-
- /* Must flush the TX FIFO when NAK detected */
- if (status & ISR_NOACK_MASK)
- writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
- dev->base + TXFCR_OFFSET);
-
- writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
-
- if (status & mask) {
- /* We are done since one of the mask bits are set */
- return time_left;
- }
- udelay(WAIT_INT_CHK);
- time_left -= WAIT_INT_CHK;
- }
- return 0;
-}
-
-/* Send command to I2C bus */
-static int bcm_kona_send_i2c_cmd(struct bcm_kona_i2c_dev *dev,
- enum bcm_kona_cmd_t cmd)
-{
- int rc = 0;
- unsigned long time_left = I2C_TIMEOUT;
-
- /* Send the command */
- bcm_kona_i2c_send_cmd_to_ctrl(dev, cmd);
-
- /* Wait for transaction to finish or timeout */
- time_left = wait_for_int_timeout(dev, time_left, IER_I2C_INT_EN_MASK);
-
- if (!time_left) {
- printf("controller timed out\n");
- rc = -ETIMEDOUT;
- }
-
- /* Clear command */
- bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
-
- return rc;
-}
-
-/* Read a single RX FIFO worth of data from the i2c bus */
-static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev,
- uint8_t *buf, unsigned int len,
- unsigned int last_byte_nak)
-{
- unsigned long time_left = I2C_TIMEOUT;
-
- /* Start the RX FIFO */
- writel((last_byte_nak << RXFCR_NACK_EN_SHIFT) |
- (len << RXFCR_READ_COUNT_SHIFT), dev->base + RXFCR_OFFSET);
-
- /* Wait for FIFO read to complete */
- time_left =
- wait_for_int_timeout(dev, time_left, IER_READ_COMPLETE_INT_MASK);
-
- if (!time_left) {
- printf("RX FIFO time out\n");
- return -EREMOTEIO;
- }
-
- /* Read data from FIFO */
- for (; len > 0; len--, buf++)
- *buf = readl(dev->base + RXFIFORDOUT_OFFSET);
-
- return 0;
-}
-
-/* Read any amount of data using the RX FIFO from the i2c bus */
-static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev,
- struct kona_i2c_msg *msg)
-{
- unsigned int bytes_to_read = MAX_RX_FIFO_SIZE;
- unsigned int last_byte_nak = 0;
- unsigned int bytes_read = 0;
- int rc;
-
- uint8_t *tmp_buf = msg->buf;
-
- while (bytes_read < msg->len) {
- if (msg->len - bytes_read <= MAX_RX_FIFO_SIZE) {
- last_byte_nak = 1; /* NAK last byte of transfer */
- bytes_to_read = msg->len - bytes_read;
- }
-
- rc = bcm_kona_i2c_read_fifo_single(dev, tmp_buf, bytes_to_read,
- last_byte_nak);
- if (rc < 0)
- return -EREMOTEIO;
-
- bytes_read += bytes_to_read;
- tmp_buf += bytes_to_read;
- }
-
- return 0;
-}
-
-/* Write a single byte of data to the i2c bus */
-static int bcm_kona_i2c_write_byte(struct bcm_kona_i2c_dev *dev, uint8_t data,
- unsigned int nak_expected)
-{
- unsigned long time_left = I2C_TIMEOUT;
- unsigned int nak_received;
-
- /* Clear pending session done interrupt */
- writel(ISR_SES_DONE_MASK, dev->base + ISR_OFFSET);
-
- /* Send one byte of data */
- writel(data, dev->base + DAT_OFFSET);
-
- time_left = wait_for_int_timeout(dev, time_left, IER_I2C_INT_EN_MASK);
-
- if (!time_left) {
- debug("controller timed out\n");
- return -ETIMEDOUT;
- }
-
- nak_received = readl(dev->base + CS_OFFSET) & CS_ACK_MASK ? 1 : 0;
-
- if (nak_received ^ nak_expected) {
- debug("unexpected NAK/ACK\n");
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-/* Write a single TX FIFO worth of data to the i2c bus */
-static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
- uint8_t *buf, unsigned int len)
-{
- int k;
- unsigned long time_left = I2C_TIMEOUT;
- unsigned int fifo_status;
-
- /* Write data into FIFO */
- for (k = 0; k < len; k++)
- writel(buf[k], (dev->base + DAT_OFFSET));
-
- /* Wait for FIFO to empty */
- do {
- time_left =
- wait_for_int_timeout(dev, time_left,
- (IER_FIFO_INT_EN_MASK |
- IER_NOACK_EN_MASK));
- fifo_status = readl(dev->base + FIFO_STATUS_OFFSET);
- } while (time_left && !(fifo_status & FIFO_STATUS_TXFIFO_EMPTY_MASK));
-
- /* Check if there was a NAK */
- if (readl(dev->base + CS_OFFSET) & CS_ACK_MASK) {
- printf("unexpected NAK\n");
- return -EREMOTEIO;
- }
-
- /* Check if a timeout occurred */
- if (!time_left) {
- printf("completion timed out\n");
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-/* Write any amount of data using TX FIFO to the i2c bus */
-static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
- struct kona_i2c_msg *msg)
-{
- unsigned int bytes_to_write = MAX_TX_FIFO_SIZE;
- unsigned int bytes_written = 0;
- int rc;
-
- uint8_t *tmp_buf = msg->buf;
-
- while (bytes_written < msg->len) {
- if (msg->len - bytes_written <= MAX_TX_FIFO_SIZE)
- bytes_to_write = msg->len - bytes_written;
-
- rc = bcm_kona_i2c_write_fifo_single(dev, tmp_buf,
- bytes_to_write);
- if (rc < 0)
- return -EREMOTEIO;
-
- bytes_written += bytes_to_write;
- tmp_buf += bytes_to_write;
- }
-
- return 0;
-}
-
-/* Send i2c address */
-static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
- struct kona_i2c_msg *msg)
-{
- unsigned char addr;
-
- if (msg->flags & I2C_M_TEN) {
- /* First byte is 11110XX0 where XX is upper 2 bits */
- addr = 0xf0 | ((msg->addr & 0x300) >> 7);
- if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
- return -EREMOTEIO;
-
- /* Second byte is the remaining 8 bits */
- addr = msg->addr & 0xff;
- if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
- return -EREMOTEIO;
-
- if (msg->flags & I2C_M_RD) {
- /* For read, send restart command */
- if (bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART) < 0)
- return -EREMOTEIO;
-
- /* Then re-send the first byte with the read bit set */
- addr = 0xf0 | ((msg->addr & 0x300) >> 7) | 0x01;
- if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
- return -EREMOTEIO;
- }
- } else {
- addr = msg->addr << 1;
-
- if (msg->flags & I2C_M_RD)
- addr |= 1;
-
- if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-static void bcm_kona_i2c_enable_autosense(struct bcm_kona_i2c_dev *dev)
-{
- writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_AUTOSENSE_OFF_MASK,
- dev->base + CLKEN_OFFSET);
-}
-
-static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev)
-{
- writel(readl(dev->base + HSTIM_OFFSET) & ~HSTIM_HS_MODE_MASK,
- dev->base + HSTIM_OFFSET);
-
- writel((dev->std_cfg->prescale << TIM_PRESCALE_SHIFT) |
- (dev->std_cfg->time_p << TIM_P_SHIFT) |
- (dev->std_cfg->no_div << TIM_NO_DIV_SHIFT) |
- (dev->std_cfg->time_div << TIM_DIV_SHIFT),
- dev->base + TIM_OFFSET);
-
- writel((dev->std_cfg->time_m << CLKEN_M_SHIFT) |
- (dev->std_cfg->time_n << CLKEN_N_SHIFT) |
- CLKEN_CLKEN_MASK, dev->base + CLKEN_OFFSET);
-}
-
-/* Master transfer function */
-static int bcm_kona_i2c_xfer(struct bcm_kona_i2c_dev *dev,
- struct kona_i2c_msg msgs[], int num)
-{
- struct kona_i2c_msg *pmsg;
- int rc = 0;
- int i;
-
- /* Enable pad output */
- writel(0, dev->base + PADCTL_OFFSET);
-
- /* Enable internal clocks */
- bcm_kona_i2c_enable_clock(dev);
-
- /* Send start command */
- rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_START);
- if (rc < 0) {
- printf("Start command failed rc = %d\n", rc);
- goto xfer_disable_pad;
- }
-
- /* Loop through all messages */
- for (i = 0; i < num; i++) {
- pmsg = &msgs[i];
-
- /* Send restart for subsequent messages */
- if ((i != 0) && ((pmsg->flags & I2C_M_NOSTART) == 0)) {
- rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
- if (rc < 0) {
- printf("restart cmd failed rc = %d\n", rc);
- goto xfer_send_stop;
- }
- }
-
- /* Send slave address */
- if (!(pmsg->flags & I2C_M_NOSTART)) {
- rc = bcm_kona_i2c_do_addr(dev, pmsg);
- if (rc < 0) {
- debug("NAK from addr %2.2x msg#%d rc = %d\n",
- pmsg->addr, i, rc);
- goto xfer_send_stop;
- }
- }
-
- /* Perform data transfer */
- if (pmsg->flags & I2C_M_RD) {
- rc = bcm_kona_i2c_read_fifo(dev, pmsg);
- if (rc < 0) {
- printf("read failure\n");
- goto xfer_send_stop;
- }
- } else {
- rc = bcm_kona_i2c_write_fifo(dev, pmsg);
- if (rc < 0) {
- printf("write failure");
- goto xfer_send_stop;
- }
- }
- }
-
- rc = num;
-
-xfer_send_stop:
- /* Send a STOP command */
- bcm_kona_send_i2c_cmd(dev, BCM_CMD_STOP);
-
-xfer_disable_pad:
- /* Disable pad output */
- writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
-
- /* Stop internal clock */
- bcm_kona_i2c_disable_clock(dev);
-
- return rc;
-}
-
-static uint bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev,
- uint speed)
-{
- switch (speed) {
- case I2C_SPEED_STANDARD_RATE:
- dev->std_cfg = &std_cfg_table[IC_SPEED_MODE_STANDARD];
- break;
- case I2C_SPEED_FAST_RATE:
- dev->std_cfg = &std_cfg_table[IC_SPEED_MODE_FAST];
- break;
- case I2C_SPEED_FAST_PLUS_RATE:
- dev->std_cfg = &std_cfg_table[IC_SPEED_MODE_FAST_PLUS];
- break;
- default:
- printf("%d hz bus speed not supported\n", speed);
- return -EINVAL;
- }
- dev->speed = speed;
- return 0;
-}
-
-static void bcm_kona_i2c_init(struct bcm_kona_i2c_dev *dev)
-{
- /* Parse bus speed */
- bcm_kona_i2c_assign_bus_speed(dev, dev->speed);
-
- /* Enable internal clocks */
- bcm_kona_i2c_enable_clock(dev);
-
- /* Configure internal dividers */
- bcm_kona_i2c_config_timing(dev);
-
- /* Disable timeout */
- writel(0, dev->base + TOUT_OFFSET);
-
- /* Enable autosense */
- bcm_kona_i2c_enable_autosense(dev);
-
- /* Enable TX FIFO */
- writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
- dev->base + TXFCR_OFFSET);
-
- /* Mask all interrupts */
- writel(0, dev->base + IER_OFFSET);
-
- /* Clear all pending interrupts */
- writel(ISR_CMDBUSY_MASK |
- ISR_READ_COMPLETE_MASK |
- ISR_SES_DONE_MASK |
- ISR_ERR_MASK |
- ISR_TXFIFOEMPTY_MASK | ISR_NOACK_MASK, dev->base + ISR_OFFSET);
-
- /* Enable the controller but leave it idle */
- bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
-
- /* Disable pad output */
- writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
-}
-
-/*
- * uboot layer
- */
-struct bcm_kona_i2c_dev *kona_get_dev(struct i2c_adapter *adap)
-{
- return &g_i2c_devs[adap->hwadapnr];
-}
-
-static void kona_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
-{
- struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
-
- if (clk_bsc_enable(dev->base))
- return;
-
- bcm_kona_i2c_init(dev);
-}
-
-static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *buffer, int len)
-{
- /* msg[0] writes the addr, msg[1] reads the data */
- struct kona_i2c_msg msg[2];
- unsigned char msgbuf0[64];
- struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
-
- msg[0].addr = chip;
- msg[0].flags = 0;
- msg[0].len = 1;
- msg[0].buf = msgbuf0; /* msgbuf0 contains incrementing reg addr */
-
- msg[1].addr = chip;
- msg[1].flags = I2C_M_RD;
- /* msg[1].buf dest ptr increments each read */
-
- msgbuf0[0] = (unsigned char)addr;
- msg[1].buf = buffer;
- msg[1].len = len;
- if (bcm_kona_i2c_xfer(dev, msg, 2) < 0) {
- /* Sending 2 i2c messages */
- kona_i2c_init(adap, adap->speed, adap->slaveaddr);
- debug("I2C read: I/O error\n");
- return -EIO;
- }
- return 0;
-}
-
-static int kona_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *buffer, int len)
-{
- struct kona_i2c_msg msg[1];
- unsigned char msgbuf0[64];
- unsigned int i;
- struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
-
- msg[0].addr = chip;
- msg[0].flags = 0;
- msg[0].len = 2; /* addr byte plus data */
- msg[0].buf = msgbuf0;
-
- for (i = 0; i < len; i++) {
- msgbuf0[0] = addr++;
- msgbuf0[1] = buffer[i];
- if (bcm_kona_i2c_xfer(dev, msg, 1) < 0) {
- kona_i2c_init(adap, adap->speed, adap->slaveaddr);
- debug("I2C write: I/O error\n");
- return -EIO;
- }
- }
- return 0;
-}
-
-static int kona_i2c_probe(struct i2c_adapter *adap, uchar chip)
-{
- uchar tmp;
-
- /*
- * read addr 0x0 of the given chip.
- */
- return kona_i2c_read(adap, chip, 0x0, 1, &tmp, 1);
-}
-
-static uint kona_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
-{
- struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
- return bcm_kona_i2c_assign_bus_speed(dev, speed);
-}
-
-/*
- * Register kona i2c adapters. Keep the order below so
- * that the bus number matches the adapter number.
- */
-#define DEF_ADAPTER(num) \
-U_BOOT_I2C_ADAP_COMPLETE(kona##num, kona_i2c_init, kona_i2c_probe, \
- kona_i2c_read, kona_i2c_write, \
- kona_i2c_set_bus_speed, DEF_SPD, 0x00, num)
-
-#ifdef CONFIG_SYS_I2C_BASE0
- DEF_ADAPTER(0)
-#endif
-#ifdef CONFIG_SYS_I2C_BASE1
- DEF_ADAPTER(1)
-#endif
-#ifdef CONFIG_SYS_I2C_BASE2
- DEF_ADAPTER(2)
-#endif
-#ifdef CONFIG_SYS_I2C_BASE3
- DEF_ADAPTER(3)
-#endif
-#ifdef CONFIG_SYS_I2C_BASE4
- DEF_ADAPTER(4)
-#endif
-#ifdef CONFIG_SYS_I2C_BASE5
- DEF_ADAPTER(5)
-#endif
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 72/87] compulab: Drop CONFIG_TARGET_MCM_IMX8M_MINI
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (70 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 71/87] sh4: Drop unused kona_i2c driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 73/87] freescale: Drop CONFIG_TARGET_MPC8536DS et al Simon Glass
` (15 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This option is not defined anywhere. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/compulab/imx8mm-cl-iot-gate/ddr/Makefile | 4 ----
1 file changed, 4 deletions(-)
diff --git a/board/compulab/imx8mm-cl-iot-gate/ddr/Makefile b/board/compulab/imx8mm-cl-iot-gate/ddr/Makefile
index 5914796628d..f73f35cd664 100644
--- a/board/compulab/imx8mm-cl-iot-gate/ddr/Makefile
+++ b/board/compulab/imx8mm-cl-iot-gate/ddr/Makefile
@@ -1,8 +1,4 @@
obj-y += ddr.o
obj-y += lpddr4_timing_ff020008.o
obj-y += lpddr4_timing_ff000110.o
-ifdef CONFIG_TARGET_MCM_IMX8M_MINI
-obj-y += lpddr4_timing_01061010.o
-else
obj-y += lpddr4_timing_01061010.1_2.o
-endif
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 73/87] freescale: Drop CONFIG_TARGET_MPC8536DS et al
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (71 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 72/87] compulab: Drop CONFIG_TARGET_MCM_IMX8M_MINI Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 74/87] sh4: Drop unused twl6030 driver Simon Glass
` (14 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This option as well as CONFIG_TARGET_P1022DS and CONFIG_TARGET_P5020DS
are not defined anywhere. Drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/freescale/common/Makefile | 3 ---
1 file changed, 3 deletions(-)
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index bd035d60a58..5f0503faf8d 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -51,8 +51,6 @@ endif
obj-$(CONFIG_TARGET_MPC8548CDS) += cds_pci_ft.o
-obj-$(CONFIG_TARGET_MPC8536DS) += ics307_clk.o
-obj-$(CONFIG_TARGET_P1022DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P3041DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P4080DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P5040DS) += ics307_clk.o
@@ -75,7 +73,6 @@ obj-$(CONFIG_EMC2305) += emc2305.o
obj-$(CONFIG_TARGET_P2041RDB) += p_corenet/
obj-$(CONFIG_TARGET_P3041DS) += p_corenet/
obj-$(CONFIG_TARGET_P4080DS) += p_corenet/
-obj-$(CONFIG_TARGET_P5020DS) += p_corenet/
obj-$(CONFIG_TARGET_P5040DS) += p_corenet/
obj-$(CONFIG_LAYERSCAPE_NS_ACCESS) += ns_access.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 74/87] sh4: Drop unused twl6030 driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (72 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 73/87] freescale: Drop CONFIG_TARGET_MPC8536DS et al Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 75/87] ppc: Makefile: Drop unused ppc4xx code Simon Glass
` (13 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/input/Makefile | 1 -
drivers/input/twl6030.c | 47 -----------------------------------------
2 files changed, 48 deletions(-)
delete mode 100644 drivers/input/twl6030.c
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index ded76bddb22..11868e7584c 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -13,5 +13,4 @@ obj-$(CONFIG_APPLE_SPI_KEYB) += apple_spi_kbd.o
obj-$(CONFIG_I8042_KEYB) += i8042.o
obj-$(CONFIG_TEGRA_KEYBOARD) += input.o tegra-kbc.o
obj-$(CONFIG_TWL4030_INPUT) += twl4030.o
-obj-$(CONFIG_TWL6030_INPUT) += twl6030.o
endif
diff --git a/drivers/input/twl6030.c b/drivers/input/twl6030.c
deleted file mode 100644
index 76bd3488fc6..00000000000
--- a/drivers/input/twl6030.c
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * TWL6030 input
- *
- * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr>
- */
-
-#include <twl6030.h>
-
-int twl6030_input_power_button(void)
-{
- u8 value;
-
- twl6030_i2c_read_u8(TWL6030_CHIP_PM, TWL6030_STS_HW_CONDITIONS, &value);
-
- /* Power button is active low. */
- if (value & TWL6030_STS_HW_CONDITIONS_PWRON)
- return 0;
-
- return 1;
-}
-
-int twl6030_input_charger(void)
-{
- u8 value;
-
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, TWL6030_CONTROLLER_STAT1,
- &value);
-
- if (value & TWL6030_CONTROLLER_STAT1_VAC_DET)
- return 1;
-
- return 0;
-}
-
-int twl6030_input_usb(void)
-{
- u8 value;
-
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, TWL6030_CONTROLLER_STAT1,
- &value);
-
- if (value & TWL6030_CONTROLLER_STAT1_VBUS_DET)
- return 1;
-
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 75/87] ppc: Makefile: Drop unused ppc4xx code
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (73 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 74/87] sh4: Drop unused twl6030 driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 76/87] armada: usb: net: Drop unused USB drivers Simon Glass
` (12 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Tom Rini, Simon Glass, Stefan Roese, Andy Fleming, Mario Six,
Masahiro Yamada, Priyanka Jain, Wolfgang Denk
CONFIG_UBOOT_PAD_TO is not defined anywhere. Drop this dead code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
---
(no changes since v1)
Makefile | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/Makefile b/Makefile
index 20a20e00d60..8150ca69e82 100644
--- a/Makefile
+++ b/Makefile
@@ -1648,17 +1648,6 @@ OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL
u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
$(call if_changed,pad_cat)
-# PPC4xx needs the SPL at the end of the image, since the reset vector
-# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
-# and need to introduce a new build target with the full blown U-Boot
-# at the start padded up to the start of the SPL image. And then concat
-# the SPL image to the end.
-
-OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
- --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
-u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
- $(call if_changed,pad_cat)
-
quiet_cmd_u-boot-elf ?= LD $@
cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
$(if $(CONFIG_SYS_BIG_ENDIAN),-EB,-EL) \
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 76/87] armada: usb: net: Drop unused USB drivers
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (74 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 75/87] ppc: Makefile: Drop unused ppc4xx code Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 77/87] usb: Drop unused ehci-faraday driver Simon Glass
` (11 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Joe Hershberger, Marek Vasut
These are not used. Drop the drivers and Kconfig option. Also drop an
old declaration in the netdev.h header.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/usb/host/Makefile | 1 -
drivers/usb/host/ehci-armada100.c | 48 -------------------
drivers/usb/host/utmi-armada100.c | 80 -------------------------------
include/netdev.h | 1 -
4 files changed, 130 deletions(-)
delete mode 100644 drivers/usb/host/ehci-armada100.c
delete mode 100644 drivers/usb/host/utmi-armada100.c
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index ddc36632069..1f59e910d3b 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_USB_OHCI_NPCM) += ohci-npcm.o
# echi
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
-obj-$(CONFIG_USB_EHCI_ARMADA100) += ehci-armada100.o utmi-armada100.o
obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o
obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
diff --git a/drivers/usb/host/ehci-armada100.c b/drivers/usb/host/ehci-armada100.c
deleted file mode 100644
index 2ce9f27b862..00000000000
--- a/drivers/usb/host/ehci-armada100.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2012
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * This driver is based on Kirkwood echi driver
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <usb.h>
-#include "ehci.h"
-#include <asm/arch/cpu.h>
-#include <asm/arch/armada100.h>
-#include <asm/arch/utmi-armada100.h>
-
-/*
- * EHCI host controller init
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- if (utmi_init() < 0)
- return -1;
-
- *hccr = (struct ehci_hccr *)(ARMD1_USB_HOST_BASE + 0x100);
- *hcor = (struct ehci_hcor *)((uint32_t) *hccr
- + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
- debug("armada100-ehci: init hccr %x and hcor %x hc_length %d\n",
- (uint32_t)*hccr, (uint32_t)*hcor,
- (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
- return 0;
-}
-
-/*
- * EHCI host controller stop
- */
-int ehci_hcd_stop(int index)
-{
- return 0;
-}
diff --git a/drivers/usb/host/utmi-armada100.c b/drivers/usb/host/utmi-armada100.c
deleted file mode 100644
index 5d66e5881f3..00000000000
--- a/drivers/usb/host/utmi-armada100.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2012
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/armada100.h>
-#include <asm/arch/utmi-armada100.h>
-#include <linux/delay.h>
-
-static int utmi_phy_init(void)
-{
- struct armd1usb_phy_reg *phy_regs =
- (struct armd1usb_phy_reg *)UTMI_PHY_BASE;
- int timeout;
-
- setbits_le32(&phy_regs->utmi_ctrl, INPKT_DELAY_SOF | PLL_PWR_UP);
- udelay(1000);
- setbits_le32(&phy_regs->utmi_ctrl, PHY_PWR_UP);
-
- clrbits_le32(&phy_regs->utmi_pll, PLL_FBDIV_MASK | PLL_REFDIV_MASK);
- setbits_le32(&phy_regs->utmi_pll, N_DIVIDER << PLL_FBDIV | M_DIVIDER);
-
- setbits_le32(&phy_regs->utmi_tx, PHSEL_VAL << CK60_PHSEL);
-
- /* Calibrate pll */
- timeout = 10000;
- while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
- ;
- if (!timeout)
- return -1;
-
- udelay(200);
- setbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
- udelay(400);
- clrbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
-
- udelay(200);
- setbits_le32(&phy_regs->utmi_tx, RCAL_START);
- udelay(400);
- clrbits_le32(&phy_regs->utmi_tx, RCAL_START);
-
- timeout = 10000;
- while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
- ;
- if (!timeout)
- return -1;
-
- return 0;
-}
-
-/*
- * Initialize USB host controller's UTMI Physical interface
- */
-int utmi_init(void)
-{
- struct armd1mpmu_registers *mpmu_regs =
- (struct armd1mpmu_registers *)ARMD1_MPMU_BASE;
-
- struct armd1apmu_registers *apmu_regs =
- (struct armd1apmu_registers *)ARMD1_APMU_BASE;
-
- /* Turn on 26Mhz ref clock for UTMI PLL */
- setbits_le32(&mpmu_regs->acgr, APB2_26M_EN | AP_26M);
-
- /* USB Clock reset */
- writel(USB_SPH_AXICLK_EN, &apmu_regs->usbcrc);
- writel(USB_SPH_AXICLK_EN | USB_SPH_AXI_RST, &apmu_regs->usbcrc);
-
- /* Initialize UTMI transceiver */
- return utmi_phy_init();
-}
diff --git a/include/netdev.h b/include/netdev.h
index 2b4e474ed08..2a7f40e5040 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -71,7 +71,6 @@ int skge_initialize(struct bd_info *bis);
int smc91111_initialize(u8 dev_num, phys_addr_t base_addr);
int smc911x_initialize(u8 dev_num, phys_addr_t base_addr);
int uli526x_initialize(struct bd_info *bis);
-int armada100_fec_register(unsigned long base_addr);
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 77/87] usb: Drop unused ehci-faraday driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (75 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 76/87] armada: usb: net: Drop unused USB drivers Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 78/87] usb: Drop unused fotg210 gadget Simon Glass
` (10 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Marek Vasut
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
common/usb_hub.c | 18 ----
drivers/usb/host/Makefile | 1 -
drivers/usb/host/ehci-faraday.c | 144 --------------------------------
drivers/usb/host/ehci-hcd.c | 5 --
include/usb/fusbh200.h | 59 -------------
5 files changed, 227 deletions(-)
delete mode 100644 drivers/usb/host/ehci-faraday.c
delete mode 100644 include/usb/fusbh200.h
diff --git a/common/usb_hub.c b/common/usb_hub.c
index f7fd12c0450..a36350f846c 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -506,24 +506,6 @@ static int usb_scan_port(struct usb_device_scan *usb_scan)
if (portchange & USB_PORT_STAT_C_ENABLE) {
debug("port %d enable change, status %x\n", i + 1, portstatus);
usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE);
- /*
- * The following hack causes a ghost device problem
- * to Faraday EHCI
- */
-#ifndef CONFIG_USB_EHCI_FARADAY
- /*
- * EM interference sometimes causes bad shielded USB
- * devices to be shutdown by the hub, this hack enables
- * them again. Works at least with mouse driver
- */
- if (!(portstatus & USB_PORT_STAT_ENABLE) &&
- (portstatus & USB_PORT_STAT_CONNECTION) &&
- usb_device_has_child_on_port(dev, i)) {
- debug("already running port %i disabled by hub (EMI?), re-enabling...\n",
- i + 1);
- usb_hub_port_connect_change(dev, i);
- }
-#endif
}
if (portstatus & USB_PORT_STAT_SUSPEND) {
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 1f59e910d3b..cce78846d98 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_USB_OHCI_NPCM) += ohci-npcm.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o
obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
-obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o
obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
diff --git a/drivers/usb/host/ehci-faraday.c b/drivers/usb/host/ehci-faraday.c
deleted file mode 100644
index 85a35269601..00000000000
--- a/drivers/usb/host/ehci-faraday.c
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Faraday USB 2.0 EHCI Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dantesu@faraday-tech.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <linux/delay.h>
-#include <usb/fusbh200.h>
-#include <usb/fotg210.h>
-
-#include "ehci.h"
-
-#ifndef CFG_USB_EHCI_BASE_LIST
-#define CFG_USB_EHCI_BASE_LIST { CONFIG_USB_EHCI_BASE }
-#endif
-
-union ehci_faraday_regs {
- struct fusbh200_regs usb;
- struct fotg210_regs otg;
-};
-
-static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs)
-{
- return !readl(®s->usb.easstr);
-}
-
-void faraday_ehci_set_usbmode(struct ehci_ctrl *ctrl)
-{
- /* nothing needs to be done */
-}
-
-int faraday_ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg)
-{
- int spd, ret = PORTSC_PSPD_HS;
- union ehci_faraday_regs *regs;
-
- ret = (void __iomem *)((ulong)ctrl->hcor - 0x10);
- if (ehci_is_fotg2xx(regs))
- spd = OTGCSR_SPD(readl(®s->otg.otgcsr));
- else
- spd = BMCSR_SPD(readl(®s->usb.bmcsr));
-
- switch (spd) {
- case 0: /* full speed */
- ret = PORTSC_PSPD_FS;
- break;
- case 1: /* low speed */
- ret = PORTSC_PSPD_LS;
- break;
- case 2: /* high speed */
- ret = PORTSC_PSPD_HS;
- break;
- default:
- printf("ehci-faraday: invalid device speed\n");
- break;
- }
-
- return ret;
-}
-
-uint32_t *faraday_ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port)
-{
- /* Faraday EHCI has one and only one portsc register */
- if (port) {
- /* Printing the message would cause a scan failure! */
- debug("The request port(%d) is not configured\n", port);
- return NULL;
- }
-
- /* Faraday EHCI PORTSC register offset is 0x20 from hcor */
- return (uint32_t *)((uint8_t *)ctrl->hcor + 0x20);
-}
-
-static const struct ehci_ops faraday_ehci_ops = {
- .set_usb_mode = faraday_ehci_set_usbmode,
- .get_port_speed = faraday_ehci_get_port_speed,
- .get_portsc_register = faraday_ehci_get_portsc_register,
-};
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor)
-{
- struct ehci_hccr *hccr;
- struct ehci_hcor *hcor;
- union ehci_faraday_regs *regs;
- uint32_t base_list[] = CFG_USB_EHCI_BASE_LIST;
-
- if (index < 0 || index >= ARRAY_SIZE(base_list))
- return -1;
- ehci_set_controller_priv(index, NULL, &faraday_ehci_ops);
- regs = (void __iomem *)base_list[index];
- hccr = (struct ehci_hccr *)®s->usb.hccr;
- hcor = (struct ehci_hcor *)®s->usb.hcor;
-
- if (ehci_is_fotg2xx(regs)) {
- /* A-device bus reset */
- /* ... Power off A-device */
- setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP);
- /* ... Drop vbus and bus traffic */
- clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ);
- mdelay(1);
- /* ... Power on A-device */
- clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP);
- /* ... Drive vbus and bus traffic */
- setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ);
- mdelay(1);
- /* Disable OTG & DEV interrupts, triggered at level-high */
- writel(IMR_IRQLH | IMR_OTG | IMR_DEV, ®s->otg.imr);
- /* Clear all interrupt status */
- writel(ISR_HOST | ISR_OTG | ISR_DEV, ®s->otg.isr);
- } else {
- /* Interrupt=level-high */
- setbits_le32(®s->usb.bmcsr, BMCSR_IRQLH);
- /* VBUS on */
- clrbits_le32(®s->usb.bmcsr, BMCSR_VBUS_OFF);
- /* Disable all interrupts */
- writel(0x00, ®s->usb.bmier);
- writel(0x1f, ®s->usb.bmisr);
- }
-
- *ret_hccr = hccr;
- *ret_hcor = hcor;
-
- return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
- return 0;
-}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9139d61dd0c..9839aa17492 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -705,12 +705,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(qhtoken);
} else {
dev->act_len = 0;
-#ifndef CONFIG_USB_EHCI_FARADAY
debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts),
ehci_readl(&ctrl->hcor->or_portsc[0]),
ehci_readl(&ctrl->hcor->or_portsc[1]));
-#endif
}
free(qtd);
@@ -1189,9 +1187,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor);
if (rc)
return rc;
-#endif
-#ifdef CONFIG_USB_EHCI_FARADAY
- tweaks |= EHCI_TWEAK_NO_INIT_CF;
#endif
rc = ehci_common_init(ctrl, tweaks);
if (rc)
diff --git a/include/usb/fusbh200.h b/include/usb/fusbh200.h
deleted file mode 100644
index 6ae1d848801..00000000000
--- a/include/usb/fusbh200.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Faraday USB 2.0 EHCI Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dantesu@faraday-tech.com>
- */
-
-#ifndef _FUSBH200_H
-#define _FUSBH200_H
-
-struct fusbh200_regs {
- struct {
- uint32_t data[4];
- } hccr; /* 0x00 - 0x0f: hccr */
- struct {
- uint32_t data[9];
- } hcor; /* 0x10 - 0x33: hcor */
- uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */
- uint32_t rsvd[2];
- uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */
- uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */
- uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */
-};
-
-/* EOF & Async. Schedule Sleep Timer Register */
-#define EASSTR_RUNNING (1 << 6) /* Put transceiver in running/resume mode */
-#define EASSTR_SUSPEND (0 << 6) /* Put transceiver in suspend mode */
-#define EASSTR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
-#define EASSTR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
-#define EASSTR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
-
-/* Bus Monitor Control Status Register */
-#define BMCSR_SPD_HIGH (2 << 9) /* Speed of the attached device */
-#define BMCSR_SPD_LOW (1 << 9)
-#define BMCSR_SPD_FULL (0 << 9)
-#define BMCSR_SPD_MASK (3 << 9)
-#define BMCSR_SPD_SHIFT 9
-#define BMCSR_SPD(x) ((x >> 9) & 0x03)
-#define BMCSR_VBUS (1 << 8) /* VBUS Valid */
-#define BMCSR_VBUS_OFF (1 << 4) /* VBUS Off */
-#define BMCSR_VBUS_ON (0 << 4) /* VBUS On */
-#define BMCSR_IRQLH (1 << 3) /* IRQ triggered at level-high */
-#define BMCSR_IRQLL (0 << 3) /* IRQ triggered at level-low */
-#define BMCSR_HALFSPD (1 << 2) /* Half speed mode for FPGA test */
-#define BMCSR_HFT_LONG (1 << 1) /* HDISCON noise filter = 270 us*/
-#define BMCSR_HFT (0 << 1) /* HDISCON noise filter = 135 us*/
-#define BMCSR_VFT_LONG (1 << 1) /* VBUS noise filter = 472 us*/
-#define BMCSR_VFT (0 << 1) /* VBUS noise filter = 135 us*/
-
-/* Bus Monitor Interrupt Status Register */
-/* Bus Monitor Interrupt Enable Register */
-#define BMISR_DMAERR (1 << 4) /* DMA error */
-#define BMISR_DMA (1 << 3) /* DMA complete */
-#define BMISR_DEVRM (1 << 2) /* device removed */
-#define BMISR_OVD (1 << 1) /* over-current detected */
-#define BMISR_VBUSERR (1 << 0) /* VBUS error */
-
-#endif
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 78/87] usb: Drop unused fotg210 gadget
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (76 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 77/87] usb: Drop unused ehci-faraday driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 79/87] rmobile: Drop unused ehci-rmobile driver Simon Glass
` (9 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Marek Vasut
This is not used and appears to be associated with the faraday board which
has been removed. Drop the driver and Kconfig options.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/usb/gadget/Makefile | 3 +-
drivers/usb/gadget/fotg210.c | 964 ------------------------------
drivers/usb/gadget/gadget_chips.h | 8 -
include/usb/fotg210.h | 362 -----------
4 files changed, 1 insertion(+), 1336 deletions(-)
delete mode 100644 drivers/usb/gadget/fotg210.c
delete mode 100644 include/usb/fotg210.h
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 9c04403da30..b04b6bcd779 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -19,8 +19,7 @@ obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o
obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
-obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
-obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o
+0obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
diff --git a/drivers/usb/gadget/fotg210.c b/drivers/usb/gadget/fotg210.c
deleted file mode 100644
index af43433d88d..00000000000
--- a/drivers/usb/gadget/fotg210.c
+++ /dev/null
@@ -1,964 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Faraday USB 2.0 OTG Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dantesu@faraday-tech.com>
- */
-
-#include <common.h>
-#include <command.h>
-#include <config.h>
-#include <cpu_func.h>
-#include <log.h>
-#include <net.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-#include <usb/fotg210.h>
-
-#define CFG_NUM_ENDPOINTS 4
-#define CFG_EP0_MAX_PACKET_SIZE 64
-#define CFG_EPX_MAX_PACKET_SIZE 512
-
-#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 2) /* 250 ms */
-
-struct fotg210_chip;
-
-struct fotg210_ep {
- struct usb_ep ep;
-
- uint maxpacket;
- uint id;
- uint stopped;
-
- struct list_head queue;
- struct fotg210_chip *chip;
- const struct usb_endpoint_descriptor *desc;
-};
-
-struct fotg210_request {
- struct usb_request req;
- struct list_head queue;
- struct fotg210_ep *ep;
-};
-
-struct fotg210_chip {
- struct usb_gadget gadget;
- struct usb_gadget_driver *driver;
- struct fotg210_regs *regs;
- uint8_t irq;
- uint16_t addr;
- int pullup;
- enum usb_device_state state;
- struct fotg210_ep ep[1 + CFG_NUM_ENDPOINTS];
-};
-
-static struct usb_endpoint_descriptor ep0_desc = {
- .bLength = sizeof(struct usb_endpoint_descriptor),
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
-};
-
-static inline int fifo_to_ep(struct fotg210_chip *chip, int id, int in)
-{
- return (id < 0) ? 0 : ((id & 0x03) + 1);
-}
-
-static inline int ep_to_fifo(struct fotg210_chip *chip, int id)
-{
- return (id <= 0) ? -1 : ((id - 1) & 0x03);
-}
-
-static inline int ep_reset(struct fotg210_chip *chip, uint8_t ep_addr)
-{
- int ep = ep_addr & USB_ENDPOINT_NUMBER_MASK;
- struct fotg210_regs *regs = chip->regs;
-
- if (ep_addr & USB_DIR_IN) {
- /* reset endpoint */
- setbits_le32(®s->iep[ep - 1], IEP_RESET);
- mdelay(1);
- clrbits_le32(®s->iep[ep - 1], IEP_RESET);
- /* clear endpoint stall */
- clrbits_le32(®s->iep[ep - 1], IEP_STALL);
- } else {
- /* reset endpoint */
- setbits_le32(®s->oep[ep - 1], OEP_RESET);
- mdelay(1);
- clrbits_le32(®s->oep[ep - 1], OEP_RESET);
- /* clear endpoint stall */
- clrbits_le32(®s->oep[ep - 1], OEP_STALL);
- }
-
- return 0;
-}
-
-static int fotg210_reset(struct fotg210_chip *chip)
-{
- struct fotg210_regs *regs = chip->regs;
- uint32_t i;
-
- chip->state = USB_STATE_POWERED;
-
- /* chip enable */
- writel(DEVCTRL_EN, ®s->dev_ctrl);
-
- /* device address reset */
- chip->addr = 0;
- writel(0, ®s->dev_addr);
-
- /* set idle counter to 7ms */
- writel(7, ®s->idle);
-
- /* disable all interrupts */
- writel(IMR_MASK, ®s->imr);
- writel(GIMR_MASK, ®s->gimr);
- writel(GIMR0_MASK, ®s->gimr0);
- writel(GIMR1_MASK, ®s->gimr1);
- writel(GIMR2_MASK, ®s->gimr2);
-
- /* clear interrupts */
- writel(ISR_MASK, ®s->isr);
- writel(0, ®s->gisr);
- writel(0, ®s->gisr0);
- writel(0, ®s->gisr1);
- writel(0, ®s->gisr2);
-
- /* chip reset */
- setbits_le32(®s->dev_ctrl, DEVCTRL_RESET);
- mdelay(10);
- if (readl(®s->dev_ctrl) & DEVCTRL_RESET) {
- printf("fotg210: chip reset failed\n");
- return -1;
- }
-
- /* CX FIFO reset */
- setbits_le32(®s->cxfifo, CXFIFO_CXFIFOCLR);
- mdelay(10);
- if (readl(®s->cxfifo) & CXFIFO_CXFIFOCLR) {
- printf("fotg210: ep0 fifo reset failed\n");
- return -1;
- }
-
- /* create static ep-fifo map (EP1 <-> FIFO0, EP2 <-> FIFO1 ...) */
- writel(EPMAP14_DEFAULT, ®s->epmap14);
- writel(EPMAP58_DEFAULT, ®s->epmap58);
- writel(FIFOMAP_DEFAULT, ®s->fifomap);
- writel(0, ®s->fifocfg);
- for (i = 0; i < 8; ++i) {
- writel(CFG_EPX_MAX_PACKET_SIZE, ®s->iep[i]);
- writel(CFG_EPX_MAX_PACKET_SIZE, ®s->oep[i]);
- }
-
- /* FIFO reset */
- for (i = 0; i < 4; ++i) {
- writel(FIFOCSR_RESET, ®s->fifocsr[i]);
- mdelay(10);
- if (readl(®s->fifocsr[i]) & FIFOCSR_RESET) {
- printf("fotg210: fifo%d reset failed\n", i);
- return -1;
- }
- }
-
- /* enable only device interrupt and triggered at level-high */
- writel(IMR_IRQLH | IMR_HOST | IMR_OTG, ®s->imr);
- writel(ISR_MASK, ®s->isr);
- /* disable EP0 IN/OUT interrupt */
- writel(GIMR0_CXOUT | GIMR0_CXIN, ®s->gimr0);
- /* disable EPX IN+SPK+OUT interrupts */
- writel(GIMR1_MASK, ®s->gimr1);
- /* disable wakeup+idle+dma+zlp interrupts */
- writel(GIMR2_WAKEUP | GIMR2_IDLE | GIMR2_DMAERR | GIMR2_DMAFIN
- | GIMR2_ZLPRX | GIMR2_ZLPTX, ®s->gimr2);
- /* enable all group interrupt */
- writel(0, ®s->gimr);
-
- /* suspend delay = 3 ms */
- writel(3, ®s->idle);
-
- /* turn-on device interrupts */
- setbits_le32(®s->dev_ctrl, DEVCTRL_GIRQ_EN);
-
- return 0;
-}
-
-static inline int fotg210_cxwait(struct fotg210_chip *chip, uint32_t mask)
-{
- struct fotg210_regs *regs = chip->regs;
- int ret = -1;
- ulong ts;
-
- for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
- if ((readl(®s->cxfifo) & mask) != mask)
- continue;
- ret = 0;
- break;
- }
-
- if (ret)
- printf("fotg210: cx/ep0 timeout\n");
-
- return ret;
-}
-
-static int fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req)
-{
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- uint32_t tmp, ts;
- uint8_t *buf = req->req.buf + req->req.actual;
- uint32_t len = req->req.length - req->req.actual;
- int fifo = ep_to_fifo(chip, ep->id);
- int ret = -EBUSY;
-
- /* 1. init dma buffer */
- if (len > ep->maxpacket)
- len = ep->maxpacket;
-
- /* 2. wait for dma ready (hardware) */
- for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
- if (!(readl(®s->dma_ctrl) & DMACTRL_START)) {
- ret = 0;
- break;
- }
- }
- if (ret) {
- printf("fotg210: dma busy\n");
- req->req.status = ret;
- return ret;
- }
-
- /* 3. DMA target setup */
- if (ep->desc->bEndpointAddress & USB_DIR_IN)
- flush_dcache_range((ulong)buf, (ulong)buf + len);
- else
- invalidate_dcache_range((ulong)buf, (ulong)buf + len);
-
- writel(virt_to_phys(buf), ®s->dma_addr);
-
- if (ep->desc->bEndpointAddress & USB_DIR_IN) {
- if (ep->id == 0) {
- /* Wait until cx/ep0 fifo empty */
- fotg210_cxwait(chip, CXFIFO_CXFIFOE);
- udelay(1);
- writel(DMAFIFO_CX, ®s->dma_fifo);
- } else {
- /* Wait until epx fifo empty */
- fotg210_cxwait(chip, CXFIFO_FIFOE(fifo));
- writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo);
- }
- writel(DMACTRL_LEN(len) | DMACTRL_MEM2FIFO, ®s->dma_ctrl);
- } else {
- uint32_t blen;
-
- if (ep->id == 0) {
- writel(DMAFIFO_CX, ®s->dma_fifo);
- do {
- blen = CXFIFO_BYTES(readl(®s->cxfifo));
- } while (blen < len);
- } else {
- writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo);
- blen = FIFOCSR_BYTES(readl(®s->fifocsr[fifo]));
- }
- len = (len < blen) ? len : blen;
- writel(DMACTRL_LEN(len) | DMACTRL_FIFO2MEM, ®s->dma_ctrl);
- }
-
- /* 4. DMA start */
- setbits_le32(®s->dma_ctrl, DMACTRL_START);
-
- /* 5. DMA wait */
- ret = -EBUSY;
- for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
- tmp = readl(®s->gisr2);
- /* DMA complete */
- if (tmp & GISR2_DMAFIN) {
- ret = 0;
- break;
- }
- /* DMA error */
- if (tmp & GISR2_DMAERR) {
- printf("fotg210: dma error\n");
- break;
- }
- /* resume, suspend, reset */
- if (tmp & (GISR2_RESUME | GISR2_SUSPEND | GISR2_RESET)) {
- printf("fotg210: dma reset by host\n");
- break;
- }
- }
-
- /* 7. DMA target reset */
- if (ret)
- writel(DMACTRL_ABORT | DMACTRL_CLRFF, ®s->dma_ctrl);
-
- writel(0, ®s->gisr2);
- writel(0, ®s->dma_fifo);
-
- req->req.status = ret;
- if (!ret)
- req->req.actual += len;
- else
- printf("fotg210: ep%d dma error(code=%d)\n", ep->id, ret);
-
- return len;
-}
-
-/*
- * result of setup packet
- */
-#define CX_IDLE 0
-#define CX_FINISH 1
-#define CX_STALL 2
-
-static void fotg210_setup(struct fotg210_chip *chip)
-{
- int id, ret = CX_IDLE;
- uint32_t tmp[2];
- struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)tmp;
- struct fotg210_regs *regs = chip->regs;
-
- /*
- * If this is the first Cx 8 byte command,
- * we can now query USB mode (high/full speed; USB 2.0/USB 1.0)
- */
- if (chip->state == USB_STATE_POWERED) {
- chip->state = USB_STATE_DEFAULT;
- if (readl(®s->otgcsr) & OTGCSR_DEV_B) {
- /* Mini-B */
- if (readl(®s->dev_ctrl) & DEVCTRL_HS) {
- puts("fotg210: HS\n");
- chip->gadget.speed = USB_SPEED_HIGH;
- /* SOF mask timer = 1100 ticks */
- writel(SOFMTR_TMR(1100), ®s->sof_mtr);
- } else {
- puts("fotg210: FS\n");
- chip->gadget.speed = USB_SPEED_FULL;
- /* SOF mask timer = 10000 ticks */
- writel(SOFMTR_TMR(10000), ®s->sof_mtr);
- }
- } else {
- printf("fotg210: mini-A?\n");
- }
- }
-
- /* switch data port to ep0 */
- writel(DMAFIFO_CX, ®s->dma_fifo);
- /* fetch 8 bytes setup packet */
- tmp[0] = readl(®s->ep0_data);
- tmp[1] = readl(®s->ep0_data);
- /* release data port */
- writel(0, ®s->dma_fifo);
-
- if (req->bRequestType & USB_DIR_IN)
- ep0_desc.bEndpointAddress = USB_DIR_IN;
- else
- ep0_desc.bEndpointAddress = USB_DIR_OUT;
-
- ret = CX_IDLE;
-
- if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
- switch (req->bRequest) {
- case USB_REQ_SET_CONFIGURATION:
- debug("fotg210: set_cfg(%d)\n", req->wValue & 0x00FF);
- if (!(req->wValue & 0x00FF)) {
- chip->state = USB_STATE_ADDRESS;
- writel(chip->addr, ®s->dev_addr);
- } else {
- chip->state = USB_STATE_CONFIGURED;
- writel(chip->addr | DEVADDR_CONF,
- ®s->dev_addr);
- }
- ret = CX_IDLE;
- break;
-
- case USB_REQ_SET_ADDRESS:
- debug("fotg210: set_addr(0x%04X)\n", req->wValue);
- chip->state = USB_STATE_ADDRESS;
- chip->addr = req->wValue & DEVADDR_ADDR_MASK;
- ret = CX_FINISH;
- writel(chip->addr, ®s->dev_addr);
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- debug("fotg210: clr_feature(%d, %d)\n",
- req->bRequestType & 0x03, req->wValue);
- switch (req->wValue) {
- case 0: /* [Endpoint] halt */
- ep_reset(chip, req->wIndex);
- ret = CX_FINISH;
- break;
- case 1: /* [Device] remote wake-up */
- case 2: /* [Device] test mode */
- default:
- ret = CX_STALL;
- break;
- }
- break;
-
- case USB_REQ_SET_FEATURE:
- debug("fotg210: set_feature(%d, %d)\n",
- req->wValue, req->wIndex & 0xf);
- switch (req->wValue) {
- case 0: /* Endpoint Halt */
- id = req->wIndex & 0xf;
- setbits_le32(®s->iep[id - 1], IEP_STALL);
- setbits_le32(®s->oep[id - 1], OEP_STALL);
- ret = CX_FINISH;
- break;
- case 1: /* Remote Wakeup */
- case 2: /* Test Mode */
- default:
- ret = CX_STALL;
- break;
- }
- break;
-
- case USB_REQ_GET_STATUS:
- debug("fotg210: get_status\n");
- ret = CX_STALL;
- break;
-
- case USB_REQ_SET_DESCRIPTOR:
- debug("fotg210: set_descriptor\n");
- ret = CX_STALL;
- break;
-
- case USB_REQ_SYNCH_FRAME:
- debug("fotg210: sync frame\n");
- ret = CX_STALL;
- break;
- }
- } /* if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) */
-
- if (ret == CX_IDLE && chip->driver->setup) {
- if (chip->driver->setup(&chip->gadget, req) < 0)
- ret = CX_STALL;
- else
- ret = CX_FINISH;
- }
-
- switch (ret) {
- case CX_FINISH:
- setbits_le32(®s->cxfifo, CXFIFO_CXFIN);
- break;
-
- case CX_STALL:
- setbits_le32(®s->cxfifo, CXFIFO_CXSTALL | CXFIFO_CXFIN);
- printf("fotg210: cx_stall!\n");
- break;
-
- case CX_IDLE:
- debug("fotg210: cx_idle?\n");
- default:
- break;
- }
-}
-
-/*
- * fifo - FIFO id
- * zlp - zero length packet
- */
-static void fotg210_recv(struct fotg210_chip *chip, int ep_id)
-{
- struct fotg210_regs *regs = chip->regs;
- struct fotg210_ep *ep = chip->ep + ep_id;
- struct fotg210_request *req;
- int len;
-
- if (ep->stopped || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
- printf("fotg210: ep%d recv, invalid!\n", ep->id);
- return;
- }
-
- if (list_empty(&ep->queue)) {
- printf("fotg210: ep%d recv, drop!\n", ep->id);
- return;
- }
-
- req = list_first_entry(&ep->queue, struct fotg210_request, queue);
- len = fotg210_dma(ep, req);
- if (len < ep->ep.maxpacket || req->req.length <= req->req.actual) {
- list_del_init(&req->queue);
- if (req->req.complete)
- req->req.complete(&ep->ep, &req->req);
- }
-
- if (ep->id > 0 && list_empty(&ep->queue)) {
- setbits_le32(®s->gimr1,
- GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
- }
-}
-
-/*
- * USB Gadget Layer
- */
-static int fotg210_ep_enable(
- struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- int id = ep_to_fifo(chip, ep->id);
- int in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
-
- if (!_ep || !desc
- || desc->bDescriptorType != USB_DT_ENDPOINT
- || le16_to_cpu(desc->wMaxPacketSize) == 0) {
- printf("fotg210: bad ep or descriptor\n");
- return -EINVAL;
- }
-
- ep->desc = desc;
- ep->stopped = 0;
-
- if (in)
- setbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_IN));
-
- switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
- case USB_ENDPOINT_XFER_CONTROL:
- return -EINVAL;
-
- case USB_ENDPOINT_XFER_ISOC:
- setbits_le32(®s->fifocfg,
- FIFOCFG(id, FIFOCFG_EN | FIFOCFG_ISOC));
- break;
-
- case USB_ENDPOINT_XFER_BULK:
- setbits_le32(®s->fifocfg,
- FIFOCFG(id, FIFOCFG_EN | FIFOCFG_BULK));
- break;
-
- case USB_ENDPOINT_XFER_INT:
- setbits_le32(®s->fifocfg,
- FIFOCFG(id, FIFOCFG_EN | FIFOCFG_INTR));
- break;
- }
-
- return 0;
-}
-
-static int fotg210_ep_disable(struct usb_ep *_ep)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- int id = ep_to_fifo(chip, ep->id);
-
- ep->desc = NULL;
- ep->stopped = 1;
-
- clrbits_le32(®s->fifocfg, FIFOCFG(id, FIFOCFG_CFG_MASK));
- clrbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_DIR_MASK));
-
- return 0;
-}
-
-static struct usb_request *fotg210_ep_alloc_request(
- struct usb_ep *_ep, gfp_t gfp_flags)
-{
- struct fotg210_request *req = malloc(sizeof(*req));
-
- if (req) {
- memset(req, 0, sizeof(*req));
- INIT_LIST_HEAD(&req->queue);
- }
- return &req->req;
-}
-
-static void fotg210_ep_free_request(
- struct usb_ep *_ep, struct usb_request *_req)
-{
- struct fotg210_request *req;
-
- req = container_of(_req, struct fotg210_request, req);
- free(req);
-}
-
-static int fotg210_ep_queue(
- struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- struct fotg210_request *req;
-
- req = container_of(_req, struct fotg210_request, req);
- if (!_req || !_req->complete || !_req->buf
- || !list_empty(&req->queue)) {
- printf("fotg210: invalid request to ep%d\n", ep->id);
- return -EINVAL;
- }
-
- if (!chip || chip->state == USB_STATE_SUSPENDED) {
- printf("fotg210: request while chip suspended\n");
- return -EINVAL;
- }
-
- req->req.actual = 0;
- req->req.status = -EINPROGRESS;
-
- if (req->req.length == 0) {
- req->req.status = 0;
- if (req->req.complete)
- req->req.complete(&ep->ep, &req->req);
- return 0;
- }
-
- if (ep->id == 0) {
- do {
- int len = fotg210_dma(ep, req);
- if (len < ep->ep.maxpacket)
- break;
- if (ep->desc->bEndpointAddress & USB_DIR_IN)
- udelay(100);
- } while (req->req.length > req->req.actual);
- } else {
- if (ep->desc->bEndpointAddress & USB_DIR_IN) {
- do {
- int len = fotg210_dma(ep, req);
- if (len < ep->ep.maxpacket)
- break;
- } while (req->req.length > req->req.actual);
- } else {
- list_add_tail(&req->queue, &ep->queue);
- clrbits_le32(®s->gimr1,
- GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
- }
- }
-
- if (ep->id == 0 || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
- if (req->req.complete)
- req->req.complete(&ep->ep, &req->req);
- }
-
- return 0;
-}
-
-static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_request *req;
-
- /* make sure it's actually queued on this endpoint */
- list_for_each_entry(req, &ep->queue, queue) {
- if (&req->req == _req)
- break;
- }
- if (&req->req != _req)
- return -EINVAL;
-
- /* remove the request */
- list_del_init(&req->queue);
-
- /* update status & invoke complete callback */
- if (req->req.status == -EINPROGRESS) {
- req->req.status = -ECONNRESET;
- if (req->req.complete)
- req->req.complete(_ep, &req->req);
- }
-
- return 0;
-}
-
-static int fotg210_ep_halt(struct usb_ep *_ep, int halt)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- int ret = -1;
-
- debug("fotg210: ep%d halt=%d\n", ep->id, halt);
-
- /* Endpoint STALL */
- if (ep->id > 0 && ep->id <= CFG_NUM_ENDPOINTS) {
- if (halt) {
- /* wait until all ep fifo empty */
- fotg210_cxwait(chip, 0xf00);
- /* stall */
- if (ep->desc->bEndpointAddress & USB_DIR_IN) {
- setbits_le32(®s->iep[ep->id - 1],
- IEP_STALL);
- } else {
- setbits_le32(®s->oep[ep->id - 1],
- OEP_STALL);
- }
- } else {
- if (ep->desc->bEndpointAddress & USB_DIR_IN) {
- clrbits_le32(®s->iep[ep->id - 1],
- IEP_STALL);
- } else {
- clrbits_le32(®s->oep[ep->id - 1],
- OEP_STALL);
- }
- }
- ret = 0;
- }
-
- return ret;
-}
-
-/*
- * activate/deactivate link with host.
- */
-static void pullup(struct fotg210_chip *chip, int is_on)
-{
- struct fotg210_regs *regs = chip->regs;
-
- if (is_on) {
- if (!chip->pullup) {
- chip->state = USB_STATE_POWERED;
- chip->pullup = 1;
- /* enable the chip */
- setbits_le32(®s->dev_ctrl, DEVCTRL_EN);
- /* clear unplug bit (BIT0) */
- clrbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG);
- }
- } else {
- chip->state = USB_STATE_NOTATTACHED;
- chip->pullup = 0;
- chip->addr = 0;
- writel(chip->addr, ®s->dev_addr);
- /* set unplug bit (BIT0) */
- setbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG);
- /* disable the chip */
- clrbits_le32(®s->dev_ctrl, DEVCTRL_EN);
- }
-}
-
-static int fotg210_pullup(struct usb_gadget *_gadget, int is_on)
-{
- struct fotg210_chip *chip;
-
- chip = container_of(_gadget, struct fotg210_chip, gadget);
-
- debug("fotg210: pullup=%d\n", is_on);
-
- pullup(chip, is_on);
-
- return 0;
-}
-
-static int fotg210_get_frame(struct usb_gadget *_gadget)
-{
- struct fotg210_chip *chip;
- struct fotg210_regs *regs;
-
- chip = container_of(_gadget, struct fotg210_chip, gadget);
- regs = chip->regs;
-
- return SOFFNR_FNR(readl(®s->sof_fnr));
-}
-
-static struct usb_gadget_ops fotg210_gadget_ops = {
- .get_frame = fotg210_get_frame,
- .pullup = fotg210_pullup,
-};
-
-static struct usb_ep_ops fotg210_ep_ops = {
- .enable = fotg210_ep_enable,
- .disable = fotg210_ep_disable,
- .queue = fotg210_ep_queue,
- .dequeue = fotg210_ep_dequeue,
- .set_halt = fotg210_ep_halt,
- .alloc_request = fotg210_ep_alloc_request,
- .free_request = fotg210_ep_free_request,
-};
-
-static struct fotg210_chip controller = {
- .regs = (void __iomem *)CONFIG_FOTG210_BASE,
- .gadget = {
- .name = "fotg210_udc",
- .ops = &fotg210_gadget_ops,
- .ep0 = &controller.ep[0].ep,
- .speed = USB_SPEED_UNKNOWN,
- .is_dualspeed = 1,
- .is_otg = 0,
- .is_a_peripheral = 0,
- .b_hnp_enable = 0,
- .a_hnp_support = 0,
- .a_alt_hnp_support = 0,
- },
- .ep[0] = {
- .id = 0,
- .ep = {
- .name = "ep0",
- .ops = &fotg210_ep_ops,
- },
- .desc = &ep0_desc,
- .chip = &controller,
- .maxpacket = CFG_EP0_MAX_PACKET_SIZE,
- },
- .ep[1] = {
- .id = 1,
- .ep = {
- .name = "ep1",
- .ops = &fotg210_ep_ops,
- },
- .chip = &controller,
- .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
- },
- .ep[2] = {
- .id = 2,
- .ep = {
- .name = "ep2",
- .ops = &fotg210_ep_ops,
- },
- .chip = &controller,
- .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
- },
- .ep[3] = {
- .id = 3,
- .ep = {
- .name = "ep3",
- .ops = &fotg210_ep_ops,
- },
- .chip = &controller,
- .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
- },
- .ep[4] = {
- .id = 4,
- .ep = {
- .name = "ep4",
- .ops = &fotg210_ep_ops,
- },
- .chip = &controller,
- .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
- },
-};
-
-int usb_gadget_handle_interrupts(int index)
-{
- struct fotg210_chip *chip = &controller;
- struct fotg210_regs *regs = chip->regs;
- uint32_t id, st, isr, gisr;
-
- isr = readl(®s->isr) & (~readl(®s->imr));
- gisr = readl(®s->gisr) & (~readl(®s->gimr));
- if (!(isr & ISR_DEV) || !gisr)
- return 0;
-
- writel(ISR_DEV, ®s->isr);
-
- /* CX interrupts */
- if (gisr & GISR_GRP0) {
- st = readl(®s->gisr0);
- /*
- * Write 1 and then 0 works for both W1C & RW.
- *
- * HW v1.11.0+: It's a W1C register (write 1 clear)
- * HW v1.10.0-: It's a R/W register (write 0 clear)
- */
- writel(st & GISR0_CXABORT, ®s->gisr0);
- writel(0, ®s->gisr0);
-
- if (st & GISR0_CXERR)
- printf("fotg210: cmd error\n");
-
- if (st & GISR0_CXABORT)
- printf("fotg210: cmd abort\n");
-
- if (st & GISR0_CXSETUP) /* setup */
- fotg210_setup(chip);
- else if (st & GISR0_CXEND) /* command finish */
- setbits_le32(®s->cxfifo, CXFIFO_CXFIN);
- }
-
- /* FIFO interrupts */
- if (gisr & GISR_GRP1) {
- st = readl(®s->gisr1);
- for (id = 0; id < 4; ++id) {
- if (st & GISR1_RX_FIFO(id))
- fotg210_recv(chip, fifo_to_ep(chip, id, 0));
- }
- }
-
- /* Device Status Interrupts */
- if (gisr & GISR_GRP2) {
- st = readl(®s->gisr2);
- /*
- * Write 1 and then 0 works for both W1C & RW.
- *
- * HW v1.11.0+: It's a W1C register (write 1 clear)
- * HW v1.10.0-: It's a R/W register (write 0 clear)
- */
- writel(st, ®s->gisr2);
- writel(0, ®s->gisr2);
-
- if (st & GISR2_RESET)
- printf("fotg210: reset by host\n");
- else if (st & GISR2_SUSPEND)
- printf("fotg210: suspend/removed\n");
- else if (st & GISR2_RESUME)
- printf("fotg210: resume\n");
-
- /* Errors */
- if (st & GISR2_ISOCERR)
- printf("fotg210: iso error\n");
- if (st & GISR2_ISOCABT)
- printf("fotg210: iso abort\n");
- if (st & GISR2_DMAERR)
- printf("fotg210: dma error\n");
- }
-
- return 0;
-}
-
-int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-{
- int i, ret = 0;
- struct fotg210_chip *chip = &controller;
-
- if (!driver || !driver->bind || !driver->setup) {
- puts("fotg210: bad parameter.\n");
- return -EINVAL;
- }
-
- INIT_LIST_HEAD(&chip->gadget.ep_list);
- for (i = 0; i < CFG_NUM_ENDPOINTS + 1; ++i) {
- struct fotg210_ep *ep = chip->ep + i;
-
- ep->ep.maxpacket = ep->maxpacket;
- INIT_LIST_HEAD(&ep->queue);
-
- if (ep->id == 0) {
- ep->stopped = 0;
- } else {
- ep->stopped = 1;
- list_add_tail(&ep->ep.ep_list, &chip->gadget.ep_list);
- }
- }
-
- if (fotg210_reset(chip)) {
- puts("fotg210: reset failed.\n");
- return -EINVAL;
- }
-
- ret = driver->bind(&chip->gadget);
- if (ret) {
- debug("fotg210: driver->bind() returned %d\n", ret);
- return ret;
- }
- chip->driver = driver;
-
- return ret;
-}
-
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-{
- struct fotg210_chip *chip = &controller;
-
- driver->unbind(&chip->gadget);
- chip->driver = NULL;
-
- pullup(chip, 0);
-
- return 0;
-}
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index abc6dc7f89f..98156c312d2 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -117,12 +117,6 @@
#define gadget_is_ci(g) 0
#endif
-#ifdef CONFIG_USB_GADGET_FOTG210
-#define gadget_is_fotg210(g) (!strcmp("fotg210_udc", (g)->name))
-#else
-#define gadget_is_fotg210(g) 0
-#endif
-
#ifdef CONFIG_USB_DWC3_GADGET
#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name))
#else
@@ -202,8 +196,6 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
return 0x20;
else if (gadget_is_ci(gadget))
return 0x21;
- else if (gadget_is_fotg210(gadget))
- return 0x22;
else if (gadget_is_dwc3(gadget))
return 0x23;
else if (gadget_is_cdns3(gadget))
diff --git a/include/usb/fotg210.h b/include/usb/fotg210.h
deleted file mode 100644
index 292ce54e0c4..00000000000
--- a/include/usb/fotg210.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Faraday USB 2.0 OTG Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dantesu@faraday-tech.com>
- */
-
-#ifndef _FOTG210_H
-#define _FOTG210_H
-
-struct fotg210_regs {
- /* USB Host Controller */
- struct {
- uint32_t data[4];
- } hccr; /* 0x00 - 0x0f: hccr */
- struct {
- uint32_t data[9];
- } hcor; /* 0x10 - 0x33: hcor */
- uint32_t rsvd1[3];
- uint32_t miscr; /* 0x40: Miscellaneous Register */
- uint32_t rsvd2[15];
- /* USB OTG Controller */
- uint32_t otgcsr;/* 0x80: OTG Control Status Register */
- uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */
- uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */
- uint32_t rsvd3[13];
- uint32_t isr; /* 0xC0: Global Interrupt Status Register */
- uint32_t imr; /* 0xC4: Global Interrupt Mask Register */
- uint32_t rsvd4[14];
- /* USB Device Controller */
- uint32_t dev_ctrl;/* 0x100: Device Control Register */
- uint32_t dev_addr;/* 0x104: Device Address Register */
- uint32_t dev_test;/* 0x108: Device Test Register */
- uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */
- uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */
- uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */
- uint32_t rsvd5[2];
- uint32_t cxfifo;/* 0x120: CX FIFO Register */
- uint32_t idle; /* 0x124: IDLE Counter Register */
- uint32_t rsvd6[2];
- uint32_t gimr; /* 0x130: Group Interrupt Mask Register */
- uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */
- uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */
- uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */
- uint32_t gisr; /* 0x140: Group Interrupt Status Register */
- uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */
- uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */
- uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */
- uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */
- uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */
- uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */
- uint32_t rsvd7[1];
- uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */
- uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */
- uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */
- uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */
- uint32_t fifomap;/* 0x1a8: FIFO Map Register */
- uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */
- uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */
- uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */
- uint32_t rsvd8[1];
- uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */
- uint32_t dma_addr; /* 0x1cc: DMA Address Register */
- uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */
-};
-
-/* Miscellaneous Register */
-#define MISCR_SUSPEND (1 << 6) /* Put transceiver in suspend mode */
-#define MISCR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
-#define MISCR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
-#define MISCR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
-
-/* OTG Control Status Register */
-#define OTGCSR_SPD_HIGH (2 << 22) /* Speed of the attached device (host) */
-#define OTGCSR_SPD_LOW (1 << 22)
-#define OTGCSR_SPD_FULL (0 << 22)
-#define OTGCSR_SPD_MASK (3 << 22)
-#define OTGCSR_SPD_SHIFT 22
-#define OTGCSR_SPD(x) (((x) >> 22) & 0x03)
-#define OTGCSR_DEV_A (0 << 21) /* Acts as A-device */
-#define OTGCSR_DEV_B (1 << 21) /* Acts as B-device */
-#define OTGCSR_ROLE_H (0 << 20) /* Acts as Host */
-#define OTGCSR_ROLE_D (1 << 20) /* Acts as Device */
-#define OTGCSR_A_VBUS_VLD (1 << 19) /* A-device VBUS Valid */
-#define OTGCSR_A_SESS_VLD (1 << 18) /* A-device Session Valid */
-#define OTGCSR_B_SESS_VLD (1 << 17) /* B-device Session Valid */
-#define OTGCSR_B_SESS_END (1 << 16) /* B-device Session End */
-#define OTGCSR_HFT_LONG (1 << 11) /* HDISCON noise filter = 270 us*/
-#define OTGCSR_HFT (0 << 11) /* HDISCON noise filter = 135 us*/
-#define OTGCSR_VFT_LONG (1 << 10) /* VBUS noise filter = 472 us*/
-#define OTGCSR_VFT (0 << 10) /* VBUS noise filter = 135 us*/
-#define OTGCSR_IDFT_LONG (1 << 9) /* ID noise filter = 4 ms*/
-#define OTGCSR_IDFT (0 << 9) /* ID noise filter = 3 ms*/
-#define OTGCSR_A_SRPR_VBUS (0 << 8) /* A-device: SRP responds to VBUS */
-#define OTGCSR_A_SRPR_DATA (1 << 8) /* A-device: SRP responds to DATA-LINE */
-#define OTGCSR_A_SRP_EN (1 << 7) /* A-device SRP detection enabled */
-#define OTGCSR_A_HNP (1 << 6) /* Set role=A-device with HNP enabled */
-#define OTGCSR_A_BUSDROP (1 << 5) /* A-device drop bus (power-down) */
-#define OTGCSR_A_BUSREQ (1 << 4) /* A-device request bus */
-#define OTGCSR_B_VBUS_DISC (1 << 2) /* B-device discharges VBUS */
-#define OTGCSR_B_HNP (1 << 1) /* B-device enable HNP */
-#define OTGCSR_B_BUSREQ (1 << 0) /* B-device request bus */
-
-/* OTG Interrupt Status Register */
-#define OTGISR_APRM (1 << 12) /* Mini-A plug removed */
-#define OTGISR_BPRM (1 << 11) /* Mini-B plug removed */
-#define OTGISR_OVD (1 << 10) /* over-current detected */
-#define OTGISR_IDCHG (1 << 9) /* ID(A/B) changed */
-#define OTGISR_RLCHG (1 << 8) /* Role(Host/Device) changed */
-#define OTGISR_BSESSEND (1 << 6) /* B-device Session End */
-#define OTGISR_AVBUSERR (1 << 5) /* A-device VBUS Error */
-#define OTGISR_ASRP (1 << 4) /* A-device SRP detected */
-#define OTGISR_BSRP (1 << 0) /* B-device SRP complete */
-
-/* OTG Interrupt Enable Register */
-#define OTGIER_APRM (1 << 12) /* Mini-A plug removed */
-#define OTGIER_BPRM (1 << 11) /* Mini-B plug removed */
-#define OTGIER_OVD (1 << 10) /* over-current detected */
-#define OTGIER_IDCHG (1 << 9) /* ID(A/B) changed */
-#define OTGIER_RLCHG (1 << 8) /* Role(Host/Device) changed */
-#define OTGIER_BSESSEND (1 << 6) /* B-device Session End */
-#define OTGIER_AVBUSERR (1 << 5) /* A-device VBUS Error */
-#define OTGIER_ASRP (1 << 4) /* A-device SRP detected */
-#define OTGIER_BSRP (1 << 0) /* B-device SRP complete */
-
-/* Global Interrupt Status Register (W1C) */
-#define ISR_HOST (1 << 2) /* USB Host interrupt */
-#define ISR_OTG (1 << 1) /* USB OTG interrupt */
-#define ISR_DEV (1 << 0) /* USB Device interrupt */
-#define ISR_MASK 0x07
-
-/* Global Interrupt Mask Register */
-#define IMR_IRQLH (1 << 3) /* Interrupt triggered at level-high */
-#define IMR_IRQLL (0 << 3) /* Interrupt triggered at level-low */
-#define IMR_HOST (1 << 2) /* USB Host interrupt */
-#define IMR_OTG (1 << 1) /* USB OTG interrupt */
-#define IMR_DEV (1 << 0) /* USB Device interrupt */
-#define IMR_MASK 0x0f
-
-/* Device Control Register */
-#define DEVCTRL_FS_FORCED (1 << 9) /* Forced to be Full-Speed Mode */
-#define DEVCTRL_HS (1 << 6) /* High Speed Mode */
-#define DEVCTRL_FS (0 << 6) /* Full Speed Mode */
-#define DEVCTRL_EN (1 << 5) /* Chip Enable */
-#define DEVCTRL_RESET (1 << 4) /* Chip Software Reset */
-#define DEVCTRL_SUSPEND (1 << 3) /* Enter Suspend Mode */
-#define DEVCTRL_GIRQ_EN (1 << 2) /* Global Interrupt Enabled */
-#define DEVCTRL_HALFSPD (1 << 1) /* Half speed mode for FPGA test */
-#define DEVCTRL_RWAKEUP (1 << 0) /* Enable remote wake-up */
-
-/* Device Address Register */
-#define DEVADDR_CONF (1 << 7) /* SET_CONFIGURATION has been executed */
-#define DEVADDR_ADDR(x) ((x) & 0x7f)
-#define DEVADDR_ADDR_MASK 0x7f
-
-/* Device Test Register */
-#define DEVTEST_NOSOF (1 << 6) /* Do not generate SOF */
-#define DEVTEST_TST_MODE (1 << 5) /* Enter Test Mode */
-#define DEVTEST_TST_NOTS (1 << 4) /* Do not toggle sequence */
-#define DEVTEST_TST_NOCRC (1 << 3) /* Do not append CRC */
-#define DEVTEST_TST_CLREA (1 << 2) /* Clear External Side Address */
-#define DEVTEST_TST_CXLP (1 << 1) /* EP0 loopback test */
-#define DEVTEST_TST_CLRFF (1 << 0) /* Clear FIFO */
-
-/* SOF Frame Number Register */
-#define SOFFNR_UFN(x) (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */
-#define SOFFNR_FNR(x) ((x) & 0x7ff) /* SOF Frame Number */
-
-/* SOF Mask Timer Register */
-#define SOFMTR_TMR(x) ((x) & 0xffff)
-
-/* PHY Test Mode Selector Register */
-#define PHYTMSR_TST_PKT (1 << 4) /* Packet send test */
-#define PHYTMSR_TST_SE0NAK (1 << 3) /* High-Speed quiescent state */
-#define PHYTMSR_TST_KSTA (1 << 2) /* High-Speed K state */
-#define PHYTMSR_TST_JSTA (1 << 1) /* High-Speed J state */
-#define PHYTMSR_UNPLUG (1 << 0) /* Enable soft-detachment */
-
-/* CX FIFO Register */
-#define CXFIFO_BYTES(x) (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */
-#define CXFIFO_FIFOE(x) (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */
-#define CXFIFO_FIFOE_FIFO0 (1 << 8)
-#define CXFIFO_FIFOE_FIFO1 (1 << 9)
-#define CXFIFO_FIFOE_FIFO2 (1 << 10)
-#define CXFIFO_FIFOE_FIFO3 (1 << 11)
-#define CXFIFO_FIFOE_MASK (0x0f << 8)
-#define CXFIFO_CXFIFOE (1 << 5) /* CX FIFO empty */
-#define CXFIFO_CXFIFOF (1 << 4) /* CX FIFO full */
-#define CXFIFO_CXFIFOCLR (1 << 3) /* CX FIFO clear */
-#define CXFIFO_CXSTALL (1 << 2) /* CX Stall */
-#define CXFIFO_TSTPKTFIN (1 << 1) /* Test packet data transfer finished */
-#define CXFIFO_CXFIN (1 << 0) /* CX data transfer finished */
-
-/* IDLE Counter Register */
-#define IDLE_MS(x) ((x) & 0x07) /* PHY suspend delay = x ms */
-
-/* Group Interrupt Mask(Disable) Register */
-#define GIMR_GRP2 (1 << 2) /* Disable interrupt group 2 */
-#define GIMR_GRP1 (1 << 1) /* Disable interrupt group 1 */
-#define GIMR_GRP0 (1 << 0) /* Disable interrupt group 0 */
-#define GIMR_MASK 0x07
-
-/* Group Interrupt Mask(Disable) Register 0 (CX) */
-#define GIMR0_CXABORT (1 << 5) /* CX command abort interrupt */
-#define GIMR0_CXERR (1 << 4) /* CX command error interrupt */
-#define GIMR0_CXEND (1 << 3) /* CX command end interrupt */
-#define GIMR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
-#define GIMR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
-#define GIMR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
-#define GIMR0_MASK 0x3f
-
-/* Group Interrupt Mask(Disable) Register 1 (FIFO) */
-#define GIMR1_FIFO_IN(x) (1 << (((x) & 3) + 16)) /* FIFOx IN */
-#define GIMR1_FIFO_TX(x) GIMR1_FIFO_IN(x)
-#define GIMR1_FIFO_OUT(x) (1 << (((x) & 3) * 2)) /* FIFOx OUT */
-#define GIMR1_FIFO_SPK(x) (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */
-#define GIMR1_FIFO_RX(x) (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x))
-#define GIMR1_MASK 0xf00ff
-
-/* Group Interrupt Mask(Disable) Register 2 (Device) */
-#define GIMR2_WAKEUP (1 << 10) /* Device waked up */
-#define GIMR2_IDLE (1 << 9) /* Device idle */
-#define GIMR2_DMAERR (1 << 8) /* DMA error */
-#define GIMR2_DMAFIN (1 << 7) /* DMA finished */
-#define GIMR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
-#define GIMR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
-#define GIMR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
-#define GIMR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
-#define GIMR2_RESUME (1 << 2) /* Resume state change Interrupt */
-#define GIMR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
-#define GIMR2_RESET (1 << 0) /* Reset Interrupt */
-#define GIMR2_MASK 0x7ff
-
-/* Group Interrupt Status Register */
-#define GISR_GRP2 (1 << 2) /* Interrupt group 2 */
-#define GISR_GRP1 (1 << 1) /* Interrupt group 1 */
-#define GISR_GRP0 (1 << 0) /* Interrupt group 0 */
-
-/* Group Interrupt Status Register 0 (CX) */
-#define GISR0_CXABORT (1 << 5) /* CX command abort interrupt */
-#define GISR0_CXERR (1 << 4) /* CX command error interrupt */
-#define GISR0_CXEND (1 << 3) /* CX command end interrupt */
-#define GISR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
-#define GISR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
-#define GISR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
-
-/* Group Interrupt Status Register 1 (FIFO) */
-#define GISR1_IN_FIFO(x) (1 << (((x) & 0x03) + 16)) /* FIFOx IN */
-#define GISR1_OUT_FIFO(x) (1 << (((x) & 0x03) * 2)) /* FIFOx OUT */
-#define GISR1_SPK_FIFO(x) (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */
-#define GISR1_RX_FIFO(x) (3 << (((x) & 0x03) * 2)) /* FIFOx OUT/SPK */
-
-/* Group Interrupt Status Register 2 (Device) */
-#define GISR2_WAKEUP (1 << 10) /* Device waked up */
-#define GISR2_IDLE (1 << 9) /* Device idle */
-#define GISR2_DMAERR (1 << 8) /* DMA error */
-#define GISR2_DMAFIN (1 << 7) /* DMA finished */
-#define GISR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
-#define GISR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
-#define GISR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
-#define GISR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
-#define GISR2_RESUME (1 << 2) /* Resume state change Interrupt */
-#define GISR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
-#define GISR2_RESET (1 << 0) /* Reset Interrupt */
-
-/* Receive Zero-Length-Packet Register */
-#define RXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP rx interrupt */
-
-/* Transfer Zero-Length-Packet Register */
-#define TXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP tx interrupt */
-
-/* ISOC Error/Abort Status Register */
-#define ISOEASR_EP(x) (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */
-
-/* IN Endpoint Register */
-#define IEP_SENDZLP (1 << 15) /* Send Zero-Length-Packet */
-#define IEP_TNRHB(x) (((x) & 0x03) << 13) \
- /* Transaction Number for High-Bandwidth EP(ISOC) */
-#define IEP_RESET (1 << 12) /* Reset Toggle Sequence */
-#define IEP_STALL (1 << 11) /* Stall */
-#define IEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
-
-/* OUT Endpoint Register */
-#define OEP_RESET (1 << 12) /* Reset Toggle Sequence */
-#define OEP_STALL (1 << 11) /* Stall */
-#define OEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
-
-/* Endpoint Map Register (EP1 ~ EP4) */
-#define EPMAP14_SET_IN(ep, fifo) \
- ((fifo) & 3) << (((ep) - 1) << 3 + 0)
-#define EPMAP14_SET_OUT(ep, fifo) \
- ((fifo) & 3) << (((ep) - 1) << 3 + 4)
-#define EPMAP14_SET(ep, in, out) \
- do { \
- EPMAP14_SET_IN(ep, in); \
- EPMAP14_SET_OUT(ep, out); \
- } while (0)
-
-#define EPMAP14_DEFAULT 0x33221100 /* EP1->FIFO0, EP2->FIFO1... */
-
-/* Endpoint Map Register (EP5 ~ EP8) */
-#define EPMAP58_SET_IN(ep, fifo) \
- ((fifo) & 3) << (((ep) - 5) << 3 + 0)
-#define EPMAP58_SET_OUT(ep, fifo) \
- ((fifo) & 3) << (((ep) - 5) << 3 + 4)
-#define EPMAP58_SET(ep, in, out) \
- do { \
- EPMAP58_SET_IN(ep, in); \
- EPMAP58_SET_OUT(ep, out); \
- } while (0)
-
-#define EPMAP58_DEFAULT 0x00000000 /* All EPx->FIFO0 */
-
-/* FIFO Map Register */
-#define FIFOMAP_BIDIR (2 << 4)
-#define FIFOMAP_IN (1 << 4)
-#define FIFOMAP_OUT (0 << 4)
-#define FIFOMAP_DIR_MASK 0x30
-#define FIFOMAP_EP(x) ((x) & 0x0f)
-#define FIFOMAP_EP_MASK 0x0f
-#define FIFOMAP_CFG_MASK 0x3f
-#define FIFOMAP_DEFAULT 0x04030201 /* FIFO0->EP1, FIFO1->EP2... */
-#define FIFOMAP(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
-
-/* FIFO Configuration Register */
-#define FIFOCFG_EN (1 << 5)
-#define FIFOCFG_BLKSZ_1024 (1 << 4)
-#define FIFOCFG_BLKSZ_512 (0 << 4)
-#define FIFOCFG_3BLK (2 << 2)
-#define FIFOCFG_2BLK (1 << 2)
-#define FIFOCFG_1BLK (0 << 2)
-#define FIFOCFG_NBLK_MASK 3
-#define FIFOCFG_NBLK_SHIFT 2
-#define FIFOCFG_INTR (3 << 0)
-#define FIFOCFG_BULK (2 << 0)
-#define FIFOCFG_ISOC (1 << 0)
-#define FIFOCFG_RSVD (0 << 0) /* Reserved */
-#define FIFOCFG_TYPE_MASK 3
-#define FIFOCFG_TYPE_SHIFT 0
-#define FIFOCFG_CFG_MASK 0x3f
-#define FIFOCFG(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
-
-/* FIFO Control Status Register */
-#define FIFOCSR_RESET (1 << 12) /* FIFO Reset */
-#define FIFOCSR_BYTES(x) ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */
-
-/* DMA Target FIFO Register */
-#define DMAFIFO_CX (1 << 4) /* DMA FIFO = CX FIFO */
-#define DMAFIFO_FIFO(x) (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */
-
-/* DMA Control Register */
-#define DMACTRL_LEN(x) (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */
-#define DMACTRL_LEN_SHIFT 8
-#define DMACTRL_CLRFF (1 << 4) /* Clear FIFO upon DMA abort */
-#define DMACTRL_ABORT (1 << 3) /* DMA abort */
-#define DMACTRL_IO2IO (1 << 2) /* IO to IO */
-#define DMACTRL_FIFO2MEM (0 << 1) /* FIFO to Memory */
-#define DMACTRL_MEM2FIFO (1 << 1) /* Memory to FIFO */
-#define DMACTRL_START (1 << 0) /* DMA start */
-
-#endif
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 79/87] rmobile: Drop unused ehci-rmobile driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (77 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 78/87] usb: Drop unused fotg210 gadget Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 80/87] usb: Drop unused ehci-vct driver Simon Glass
` (8 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Nobuhiro Iwamatsu
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
.../mach-rmobile/include/mach/ehci-rmobile.h | 146 ------------------
drivers/usb/host/Makefile | 1 -
drivers/usb/host/ehci-rmobile.c | 129 ----------------
3 files changed, 276 deletions(-)
delete mode 100644 arch/arm/mach-rmobile/include/mach/ehci-rmobile.h
delete mode 100644 drivers/usb/host/ehci-rmobile.c
diff --git a/arch/arm/mach-rmobile/include/mach/ehci-rmobile.h b/arch/arm/mach-rmobile/include/mach/ehci-rmobile.h
deleted file mode 100644
index ca8c5f37063..00000000000
--- a/arch/arm/mach-rmobile/include/mach/ehci-rmobile.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2013,2014 Renesas Electronics Corporation
- * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-
-#ifndef __EHCI_RMOBILE_H__
-#define __EHCI_RMOBILE_H__
-
-/* Register offset */
-#define OHCI_OFFSET 0x00
-#define OHCI_SIZE 0x1000
-#define EHCI_OFFSET 0x1000
-#define EHCI_SIZE 0x1000
-
-#define EHCI_USBCMD (EHCI_OFFSET + 0x0020)
-
-/* USBCTR */
-#define DIRPD (1 << 8)
-#define PLL_RST (1 << 2)
-#define PCICLK_MASK (1 << 1)
-#define USBH_RST (1 << 0)
-
-/* CMND_STS */
-#define SERREN (1 << 8)
-#define PERREN (1 << 6)
-#define MASTEREN (1 << 2)
-#define MEMEN (1 << 1)
-
-/* PCIAHB_WIN1_CTR and PCIAHB_WIN2_CTR */
-#define PCIAHB_WIN_PREFETCH ((1 << 1)|(1 << 0))
-
-/* AHBPCI_WIN1_CTR */
-#define PCIWIN1_PCICMD ((1 << 3)|(1 << 1))
-#define AHB_CFG_AHBPCI 0x40000000
-#define AHB_CFG_HOST 0x80000000
-
-/* AHBPCI_WIN2_CTR */
-#define PCIWIN2_PCICMD ((1 << 2)|(1 << 1))
-
-/* PCI_INT_ENABLE */
-#define USBH_PMEEN (1 << 19)
-#define USBH_INTBEN (1 << 17)
-#define USBH_INTAEN (1 << 16)
-
-/* AHB_BUS_CTR */
-#define SMODE_READY_CTR (1 << 17)
-#define SMODE_READ_BURST (1 << 16)
-#define MMODE_HBUSREQ (1 << 7)
-#define MMODE_BOUNDARY ((1 << 6)|(1 << 5))
-#define MMODE_BURST_WIDTH ((1 << 4)|(1 << 3))
-#define MMODE_SINGLE_MODE ((1 << 4)|(1 << 3))
-#define MMODE_WR_INCR (1 << 2)
-#define MMODE_BYTE_BURST (1 << 1)
-#define MMODE_HTRANS (1 << 0)
-
-/* PCI_ARBITER_CTR */
-#define PCIBUS_PARK_TIMER 0x00FF0000
-#define PCIBUS_PARK_TIMER_SET 0x00070000
-#define PCIBP_MODE (1 << 12)
-#define PCIREQ7 (1 << 7)
-#define PCIREQ6 (1 << 6)
-#define PCIREQ5 (1 << 5)
-#define PCIREQ4 (1 << 4)
-#define PCIREQ3 (1 << 3)
-#define PCIREQ2 (1 << 2)
-#define PCIREQ1 (1 << 1)
-#define PCIREQ0 (1 << 0)
-
-#define SMSTPCR7 0xE615014C
-#define SMSTPCR703 (1 << 3)
-
-/* Init AHB master and slave functions of the host logic */
-#define AHB_BUS_CTR_INIT \
- (SMODE_READY_CTR | MMODE_HBUSREQ | MMODE_WR_INCR | \
- MMODE_BYTE_BURST | MMODE_HTRANS)
-
-#define USBCTR_WIN_SIZE_1GB 0x800
-
-/* PCI Configuration Registers */
-#define PCI_CONF_OHCI_OFFSET 0x10000
-#define PCI_CONF_EHCI_OFFSET 0x10100
-struct ahb_pciconf {
- u32 vid_did;
- u32 cmnd_sts;
- u32 rev;
- u32 cache_line;
- u32 basead;
-};
-
-/* PCI Configuration Registers for AHB-PCI Bridge Registers */
-#define PCI_CONF_AHBPCI_OFFSET 0x10000
-struct ahbconf_pci_bridge {
- u32 vid_did; /* 0x00 */
- u32 cmnd_sts;
- u32 revid_cc;
- u32 cls_lt_ht_bist;
- u32 basead; /* 0x10 */
- u32 win1_basead;
- u32 win2_basead;
- u32 dummy0[5];
- u32 ssvdi_ssid; /* 0x2C */
- u32 dummy1[4];
- u32 intr_line_pin;
-};
-
-/* AHB-PCI Bridge PCI Communication Registers */
-#define AHBPCI_OFFSET 0x10800
-struct ahbcom_pci_bridge {
- u32 pciahb_win1_ctr; /* 0x00 */
- u32 pciahb_win2_ctr;
- u32 pciahb_dct_ctr;
- u32 dummy0;
- u32 ahbpci_win1_ctr; /* 0x10 */
- u32 ahbpci_win2_ctr;
- u32 dummy1;
- u32 ahbpci_dct_ctr;
- u32 pci_int_enable; /* 0x20 */
- u32 pci_int_status;
- u32 dummy2[2];
- u32 ahb_bus_ctr; /* 0x30 */
- u32 usbctr;
- u32 dummy3[2];
- u32 pci_arbiter_ctr; /* 0x40 */
- u32 dummy4;
- u32 pci_unit_rev; /* 0x48 */
-};
-
-struct rmobile_ehci_reg {
- u32 hciversion; /* hciversion/caplength */
- u32 hcsparams; /* hcsparams */
- u32 hccparams; /* hccparams */
- u32 hcsp_portroute; /* hcsp_portroute */
- u32 usbcmd; /* usbcmd */
- u32 usbsts; /* usbsts */
- u32 usbintr; /* usbintr */
- u32 frindex; /* frindex */
- u32 ctrldssegment; /* ctrldssegment */
- u32 periodiclistbase; /* periodiclistbase */
- u32 asynclistaddr; /* asynclistaddr */
- u32 dummy[9];
- u32 configflag; /* configflag */
- u32 portsc; /* portsc */
-};
-
-#endif /* __EHCI_RMOBILE_H__ */
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index cce78846d98..3d3dd5f279f 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -41,7 +41,6 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o
-obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
# xhci
diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c
deleted file mode 100644
index 60525f22867..00000000000
--- a/drivers/usb/host/ehci-rmobile.c
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * EHCI HCD (Host Controller Driver) for USB.
- *
- * Copyright (C) 2013,2014 Renesas Electronics Corporation
- * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/ehci-rmobile.h>
-#include <linux/delay.h>
-#include "ehci.h"
-
-#if defined(CONFIG_R8A7740)
-static u32 usb_base_address[] = {
- 0xC6700000
-};
-#elif defined(CONFIG_R8A7790)
-static u32 usb_base_address[] = {
- 0xEE080000, /* USB0 (EHCI) */
- 0xEE0A0000, /* USB1 */
- 0xEE0C0000, /* USB2 */
-};
-#elif defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \
- defined(CONFIG_R8A7794)
-static u32 usb_base_address[] = {
- 0xEE080000, /* USB0 (EHCI) */
- 0xEE0C0000, /* USB1 */
-};
-#else
-#error rmobile EHCI USB driver not supported on this platform
-#endif
-
-int ehci_hcd_stop(int index)
-{
- int i;
- u32 base;
- struct ahbcom_pci_bridge *ahbcom_pci;
-
- base = usb_base_address[index];
- ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET);
- writel(0, &ahbcom_pci->ahb_bus_ctr);
-
- /* reset ehci */
- setbits_le32(base + EHCI_USBCMD, CMD_RESET);
- for (i = 100; i > 0; i--) {
- if (!(readl(base + EHCI_USBCMD) & CMD_RESET))
- break;
- udelay(100);
- }
-
- if (!i)
- printf("error : ehci(%d) reset failed.\n", index);
-
- if (index == (ARRAY_SIZE(usb_base_address) - 1))
- setbits_le32(SMSTPCR7, SMSTPCR703);
-
- return 0;
-}
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- u32 base;
- u32 phys_base;
- struct rmobile_ehci_reg *rehci;
- struct ahbcom_pci_bridge *ahbcom_pci;
- struct ahbconf_pci_bridge *ahbconf_pci;
- struct ahb_pciconf *ahb_pciconf_ohci;
- struct ahb_pciconf *ahb_pciconf_ehci;
- uint32_t cap_base;
-
- base = usb_base_address[index];
- phys_base = base;
- if (index == 0)
- clrbits_le32(SMSTPCR7, SMSTPCR703);
-
- rehci = (struct rmobile_ehci_reg *)(base + EHCI_OFFSET);
- ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET);
- ahbconf_pci =
- (struct ahbconf_pci_bridge *)(base + PCI_CONF_AHBPCI_OFFSET);
- ahb_pciconf_ohci = (struct ahb_pciconf *)(base + PCI_CONF_OHCI_OFFSET);
- ahb_pciconf_ehci = (struct ahb_pciconf *)(base + PCI_CONF_EHCI_OFFSET);
-
- /* Clock & Reset & Direct Power Down */
- clrsetbits_le32(&ahbcom_pci->usbctr,
- (DIRPD | PCICLK_MASK | USBH_RST), USBCTR_WIN_SIZE_1GB);
- clrbits_le32(&ahbcom_pci->usbctr, PLL_RST);
-
- /* AHB-PCI Bridge Communication Registers */
- writel(AHB_BUS_CTR_INIT, &ahbcom_pci->ahb_bus_ctr);
- writel((CFG_SYS_SDRAM_BASE & 0xf0000000) | PCIAHB_WIN_PREFETCH,
- &ahbcom_pci->pciahb_win1_ctr);
- writel(0xf0000000 | PCIAHB_WIN_PREFETCH,
- &ahbcom_pci->pciahb_win2_ctr);
- writel(phys_base | PCIWIN2_PCICMD, &ahbcom_pci->ahbpci_win2_ctr);
-
- setbits_le32(&ahbcom_pci->pci_arbiter_ctr,
- PCIBP_MODE | PCIREQ1 | PCIREQ0);
-
- /* PCI Configuration Registers for AHBPCI */
- writel(PCIWIN1_PCICMD | AHB_CFG_AHBPCI,
- &ahbcom_pci->ahbpci_win1_ctr);
- writel(phys_base + AHBPCI_OFFSET, &ahbconf_pci->basead);
- writel(CFG_SYS_SDRAM_BASE & 0xf0000000, &ahbconf_pci->win1_basead);
- writel(0xf0000000, &ahbconf_pci->win2_basead);
- writel(SERREN | PERREN | MASTEREN | MEMEN,
- &ahbconf_pci->cmnd_sts);
-
- /* PCI Configuration Registers for EHCI */
- writel(PCIWIN1_PCICMD | AHB_CFG_HOST, &ahbcom_pci->ahbpci_win1_ctr);
- writel(phys_base + OHCI_OFFSET, &ahb_pciconf_ohci->basead);
- writel(phys_base + EHCI_OFFSET, &ahb_pciconf_ehci->basead);
- writel(SERREN | PERREN | MASTEREN | MEMEN,
- &ahb_pciconf_ohci->cmnd_sts);
- writel(SERREN | PERREN | MASTEREN | MEMEN,
- &ahb_pciconf_ehci->cmnd_sts);
-
- /* Enable PCI interrupt */
- setbits_le32(&ahbcom_pci->pci_int_enable,
- USBH_PMEEN | USBH_INTBEN | USBH_INTAEN);
-
- *hccr = (struct ehci_hccr *)((uint32_t)&rehci->hciversion);
- cap_base = ehci_readl(&(*hccr)->cr_capbase);
- *hcor = (struct ehci_hcor *)((uint32_t)*hccr + HC_LENGTH(cap_base));
-
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 80/87] usb: Drop unused ehci-vct driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (78 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 79/87] rmobile: Drop unused ehci-rmobile driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 81/87] usb: Drop unused sl811-hcd driver Simon Glass
` (7 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Marek Vasut
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/usb/host/Makefile | 1 -
drivers/usb/host/ehci-vct.c | 44 -------------------------------------
2 files changed, 45 deletions(-)
delete mode 100644 drivers/usb/host/ehci-vct.c
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 3d3dd5f279f..3e5ba2bd0ba 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -39,7 +39,6 @@ obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
-obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o
obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
diff --git a/drivers/usb/host/ehci-vct.c b/drivers/usb/host/ehci-vct.c
deleted file mode 100644
index 7167f82b481..00000000000
--- a/drivers/usb/host/ehci-vct.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
- */
-
-#include <common.h>
-#include <usb.h>
-
-#include "ehci.h"
-
-int vct_ehci_hcd_init(u32 *hccr, u32 *hcor);
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- int ret;
- u32 vct_hccr;
- u32 vct_hcor;
-
- /*
- * Init VCT specific stuff
- */
- ret = vct_ehci_hcd_init(&vct_hccr, &vct_hcor);
- if (ret)
- return ret;
-
- *hccr = (struct ehci_hccr *)vct_hccr;
- *hcor = (struct ehci_hcor *)vct_hcor;
-
- return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
- return 0;
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 81/87] usb: Drop unused sl811-hcd driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (79 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 80/87] usb: Drop unused ehci-vct driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 82/87] imx: Drop CONFIG_USE_PLUGIN Simon Glass
` (6 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Marek Vasut
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/usb/host/Makefile | 1 -
drivers/usb/host/sl811-hcd.c | 714 -----------------------------------
drivers/usb/host/sl811.h | 104 -----
3 files changed, 819 deletions(-)
delete mode 100644 drivers/usb/host/sl811-hcd.c
delete mode 100644 drivers/usb/host/sl811.h
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 3e5ba2bd0ba..8dad36f9369 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_USB_OHCI_NEW) += ohci-hcd.o
obj-$(CONFIG_USB_ATMEL) += ohci-at91.o
obj-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
-obj-$(CONFIG_USB_SL811HS) += sl811-hcd.o
obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o
obj-$(CONFIG_USB_OHCI_PCI) += ohci-pci.o
obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
deleted file mode 100644
index 7c823f241a8..00000000000
--- a/drivers/usb/host/sl811-hcd.c
+++ /dev/null
@@ -1,714 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This code is based on linux driver for sl811hs chip, source at
- * drivers/usb/host/sl811.c:
- *
- * SL811 Host Controller Interface driver for USB.
- *
- * Copyright (c) 2003/06, Courage Co., Ltd.
- *
- * Based on:
- * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
- * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
- * Adam Richter, Gregory P. Smith;
- * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
- * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <usb.h>
-#include <linux/delay.h>
-#include "sl811.h"
-
-#include "../../../board/kup/common/kup.h"
-
-#ifdef __PPC__
-# define EIEIO __asm__ volatile ("eieio")
-#else
-# define EIEIO /* nothing */
-#endif
-
-#define SL811_ADR (0x50000000)
-#define SL811_DAT (0x50000001)
-
-#ifdef SL811_DEBUG
-static int debug = 9;
-#endif
-
-static int root_hub_devnum = 0;
-static struct usb_port_status rh_status = { 0 };/* root hub port status */
-
-static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
- void *data, int buf_len, struct devrequest *cmd);
-
-static void sl811_write (__u8 index, __u8 data)
-{
- *(volatile unsigned char *) (SL811_ADR) = index;
- EIEIO;
- *(volatile unsigned char *) (SL811_DAT) = data;
- EIEIO;
-}
-
-static __u8 sl811_read (__u8 index)
-{
- __u8 data;
-
- *(volatile unsigned char *) (SL811_ADR) = index;
- EIEIO;
- data = *(volatile unsigned char *) (SL811_DAT);
- EIEIO;
- return (data);
-}
-
-/*
- * Read consecutive bytes of data from the SL811H/SL11H buffer
- */
-static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size)
-{
- *(volatile unsigned char *) (SL811_ADR) = offset;
- EIEIO;
- while (size--) {
- *buf++ = *(volatile unsigned char *) (SL811_DAT);
- EIEIO;
- }
-}
-
-/*
- * Write consecutive bytes of data to the SL811H/SL11H buffer
- */
-static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
-{
- *(volatile unsigned char *) (SL811_ADR) = offset;
- EIEIO;
- while (size--) {
- *(volatile unsigned char *) (SL811_DAT) = *buf++;
- EIEIO;
- }
-}
-
-int usb_init_kup4x (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- int i;
- unsigned char tmp;
-
- memctl = &immap->im_memctl;
- memctl->memc_or7 = 0xFFFF8726;
- memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */
- /* BP 14 low = USB ON */
- immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
- /* PB 14 nomal port */
- immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
- /* output */
- immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
-
- puts ("USB: ");
-
- for (i = 0x10; i < 0xff; i++) {
- sl811_write(i, i);
- tmp = (sl811_read(i));
- if (tmp != i) {
- printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
- return (-1);
- }
- }
- printf ("SL811 ready\n");
- return (0);
-}
-
-/*
- * This function resets SL811HS controller and detects the speed of
- * the connecting device
- *
- * Return: 0 = no device attached; 1 = USB device attached
- */
-static int sl811_hc_reset(void)
-{
- int status ;
-
- sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
- sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
-
- mdelay(20);
-
- /* Disable hardware SOF generation, clear all irq status. */
- sl811_write(SL811_CTRL1, 0);
- mdelay(2);
- sl811_write(SL811_INTRSTS, 0xff);
- status = sl811_read(SL811_INTRSTS);
-
- if (status & SL811_INTR_NOTPRESENT) {
- /* Device is not present */
- PDEBUG(0, "Device not present\n");
- rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE);
- rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
- sl811_write(SL811_INTR, SL811_INTR_INSRMV);
- return 0;
- }
-
- /* Send SOF to address 0, endpoint 0. */
- sl811_write(SL811_LEN_B, 0);
- sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0));
- sl811_write(SL811_DEV_B, 0x00);
- sl811_write(SL811_SOFLOW, SL811_12M_LOW);
-
- if (status & SL811_INTR_SPEED_FULL) {
- /* full speed device connect directly to root hub */
- PDEBUG (0, "Full speed Device attached\n");
-
- sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
- mdelay(20);
- sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
- sl811_write(SL811_CTRL1, SL811_CTRL1_SOF);
-
- /* start the SOF or EOP */
- sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
- rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION;
- rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED;
- mdelay(2);
- sl811_write(SL811_INTRSTS, 0xff);
- } else {
- /* slow speed device connect directly to root-hub */
- PDEBUG(0, "Low speed Device attached\n");
-
- sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
- mdelay(20);
- sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI);
- sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF);
-
- /* start the SOF or EOP */
- sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
- rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED;
- mdelay(2);
- sl811_write(SL811_INTRSTS, 0xff);
- }
-
- rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
- sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A);
-
- return 1;
-}
-
-int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
-{
- root_hub_devnum = 0;
- sl811_hc_reset();
- return 0;
-}
-
-int usb_lowlevel_stop(int index)
-{
- sl811_hc_reset();
- return 0;
-}
-
-static int calc_needed_buswidth(int bytes, int need_preamble)
-{
- return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048;
-}
-
-static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len)
-{
- __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE;
- __u16 status = 0;
- int err = 0, time_start = get_timer(0);
- int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
- (dev->speed == USB_SPEED_LOW);
-
- if (len > 239)
- return -1;
-
- if (usb_pipeout(pipe))
- ctrl |= SL811_USB_CTRL_DIR_OUT;
- if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
- ctrl |= SL811_USB_CTRL_TOGGLE_1;
- if (need_preamble)
- ctrl |= SL811_USB_CTRL_PREAMBLE;
-
- sl811_write(SL811_INTRSTS, 0xff);
-
- while (err < 3) {
- sl811_write(SL811_ADDR_A, 0x10);
- sl811_write(SL811_LEN_A, len);
- if (usb_pipeout(pipe) && len)
- sl811_write_buf(0x10, buffer, len);
-
- if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
- sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble))
- ctrl |= SL811_USB_CTRL_SOF;
- else
- ctrl &= ~SL811_USB_CTRL_SOF;
-
- sl811_write(SL811_CTRL_A, ctrl);
- while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
- if (5*CONFIG_SYS_HZ < get_timer(time_start)) {
- printf("USB transmit timed out\n");
- return -USB_ST_CRC_ERR;
- }
- }
-
- sl811_write(SL811_INTRSTS, 0xff);
- status = sl811_read(SL811_STS_A);
-
- if (status & SL811_USB_STS_ACK) {
- int remainder = sl811_read(SL811_CNT_A);
- if (remainder) {
- PDEBUG(0, "usb transfer remainder = %d\n", remainder);
- len -= remainder;
- }
- if (usb_pipein(pipe) && len)
- sl811_read_buf(0x10, buffer, len);
- return len;
- }
-
- if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK)
- continue;
-
- PDEBUG(0, "usb transfer error %#x\n", (int)status);
- err++;
- }
-
- err = 0;
-
- if (status & SL811_USB_STS_ERROR)
- err |= USB_ST_BUF_ERR;
- if (status & SL811_USB_STS_TIMEOUT)
- err |= USB_ST_CRC_ERR;
- if (status & SL811_USB_STS_STALL)
- err |= USB_ST_STALLED;
-
- return -err;
-}
-
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len)
-{
- int dir_out = usb_pipeout(pipe);
- int ep = usb_pipeendpoint(pipe);
- int max = usb_maxpacket(dev, pipe);
- int done = 0;
-
- PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n",
- usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
-
- dev->status = 0;
-
- sl811_write(SL811_DEV_A, usb_pipedevice(pipe));
- sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep));
- while (done < len) {
- int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
- max > len - done ? len - done : max);
- if (res < 0) {
- dev->status = -res;
- return res;
- }
-
- if (!dir_out && res < max) /* short packet */
- break;
-
- done += res;
- usb_dotoggle(dev, ep, dir_out);
- }
-
- dev->act_len = done;
-
- return 0;
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len,struct devrequest *setup)
-{
- int done = 0;
- int devnum = usb_pipedevice(pipe);
- int ep = usb_pipeendpoint(pipe);
-
- dev->status = 0;
-
- if (devnum == root_hub_devnum)
- return sl811_rh_submit_urb(dev, pipe, buffer, len, setup);
-
- PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n",
- devnum, ep, buffer, len, (int)setup->requesttype,
- (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64);
-
- sl811_write(SL811_DEV_A, devnum);
- sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep));
- /* setup phase */
- usb_settoggle(dev, ep, 1, 0);
- if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep),
- (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
- int dir_in = usb_pipein(pipe);
- int max = usb_maxpacket(dev, pipe);
-
- /* data phase */
- sl811_write(SL811_PIDEP_A,
- PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep));
- usb_settoggle(dev, ep, usb_pipeout(pipe), 1);
- while (done < len) {
- int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
- max > len - done ? len - done : max);
- if (res < 0) {
- PDEBUG(0, "status data failed!\n");
- dev->status = -res;
- return 0;
- }
- done += res;
- usb_dotoggle(dev, ep, usb_pipeout(pipe));
- if (dir_in && res < max) /* short packet */
- break;
- }
-
- /* status phase */
- sl811_write(SL811_PIDEP_A,
- PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep));
- usb_settoggle(dev, ep, !usb_pipeout(pipe), 1);
- if (sl811_send_packet(dev,
- !dir_in ? usb_rcvctrlpipe(dev, ep) :
- usb_sndctrlpipe(dev, ep),
- 0, 0) < 0) {
- PDEBUG(0, "status phase failed!\n");
- dev->status = -1;
- }
- } else {
- PDEBUG(0, "setup phase failed!\n");
- dev->status = -1;
- }
-
- dev->act_len = done;
-
- return done;
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len, int interval, bool nonblock)
-{
- PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe,
- buffer, len, interval);
- return -1;
-}
-
-/*
- * SL811 Virtual Root Hub
- */
-
-/* Device descriptor */
-static __u8 sl811_rh_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x10, /* __u16 bcdUSB; v1.1 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x02, /* __u8 iProduct; */
- 0x01, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static __u8 sl811_rh_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup,
- 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x08, /* __u16 ep_wMaxPacketSize; */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-/* root hub class descriptor*/
-static __u8 sl811_rh_hub_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x29, /* __u8 bDescriptorType; Hub-descriptor */
- 0x01, /* __u8 bNbrPorts; */
- 0x00, /* __u16 wHubCharacteristics; */
- 0x00,
- 0x50, /* __u8 bPwrOn2pwrGood; 2ms */
- 0x00, /* __u8 bHubContrCurrent; 0 mA */
- 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */
- 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
-};
-
-/*
- * helper routine for returning string descriptors in UTF-16LE
- * input can actually be ISO-8859-1; ASCII is its 7-bit subset
- */
-static int ascii2utf (char *s, u8 *utf, int utfmax)
-{
- int retval;
-
- for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
- *utf++ = *s++;
- *utf++ = 0;
- }
- return retval;
-}
-
-/*
- * root_hub_string is used by each host controller's root hub code,
- * so that they're identified consistently throughout the system.
- */
-static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
-{
- char buf [30];
-
- /* assert (len > (2 * (sizeof (buf) + 1)));
- assert (strlen (type) <= 8);*/
-
- /* language ids */
- if (id == 0) {
- *data++ = 4; *data++ = 3; /* 4 bytes data */
- *data++ = 0; *data++ = 0; /* some language id */
- return 4;
-
- /* serial number */
- } else if (id == 1) {
- sprintf (buf, "%#x", serial);
-
- /* product description */
- } else if (id == 2) {
- sprintf (buf, "USB %s Root Hub", type);
-
- /* id 3 == vendor description */
-
- /* unsupported IDs --> "stall" */
- } else
- return 0;
-
- ascii2utf (buf, data + 2, len - 2);
- data [0] = 2 + strlen(buf) * 2;
- data [1] = 3;
- return data [0];
-}
-
-/* helper macro */
-#define OK(x) len = (x); break
-
-/*
- * This function handles all USB request to the the virtual root hub
- */
-static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
- void *data, int buf_len, struct devrequest *cmd)
-{
- __u8 data_buf[16];
- __u8 *bufp = data_buf;
- int len = 0;
- int status = 0;
- __u16 bmRType_bReq;
- __u16 wValue = le16_to_cpu (cmd->value);
- __u16 wLength = le16_to_cpu (cmd->length);
-#ifdef SL811_DEBUG
- __u16 wIndex = le16_to_cpu (cmd->index);
-#endif
-
- if (usb_pipeint(pipe)) {
- PDEBUG(0, "interrupt transfer unimplemented!\n");
- return 0;
- }
-
- bmRType_bReq = cmd->requesttype | (cmd->request << 8);
-
- PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n",
- bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength);
-
- /* Request Destination:
- without flags: Device,
- USB_RECIP_INTERFACE: interface,
- USB_RECIP_ENDPOINT: endpoint,
- USB_TYPE_CLASS means HUB here,
- USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here
- */
- switch (bmRType_bReq) {
- case RH_GET_STATUS:
- *(__u16 *)bufp = cpu_to_le16(1);
- OK(2);
-
- case RH_GET_STATUS | USB_RECIP_INTERFACE:
- *(__u16 *)bufp = cpu_to_le16(0);
- OK(2);
-
- case RH_GET_STATUS | USB_RECIP_ENDPOINT:
- *(__u16 *)bufp = cpu_to_le16(0);
- OK(2);
-
- case RH_GET_STATUS | USB_TYPE_CLASS:
- *(__u32 *)bufp = cpu_to_le32(0);
- OK(4);
-
- case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS:
- *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus);
- OK(4);
-
- case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT:
- switch (wValue) {
- case 1:
- OK(0);
- }
- break;
-
- case RH_CLEAR_FEATURE | USB_TYPE_CLASS:
- switch (wValue) {
- case C_HUB_LOCAL_POWER:
- OK(0);
-
- case C_HUB_OVER_CURRENT:
- OK(0);
- }
- break;
-
- case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
- switch (wValue) {
- case USB_PORT_FEAT_ENABLE:
- rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE;
- OK(0);
-
- case USB_PORT_FEAT_SUSPEND:
- rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND;
- OK(0);
-
- case USB_PORT_FEAT_POWER:
- rh_status.wPortStatus &= ~USB_PORT_STAT_POWER;
- OK(0);
-
- case USB_PORT_FEAT_C_CONNECTION:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION;
- OK(0);
-
- case USB_PORT_FEAT_C_ENABLE:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE;
- OK(0);
-
- case USB_PORT_FEAT_C_SUSPEND:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND;
- OK(0);
-
- case USB_PORT_FEAT_C_OVER_CURRENT:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT;
- OK(0);
-
- case USB_PORT_FEAT_C_RESET:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET;
- OK(0);
- }
- break;
-
- case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
- switch (wValue) {
- case USB_PORT_FEAT_SUSPEND:
- rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND;
- OK(0);
-
- case USB_PORT_FEAT_RESET:
- rh_status.wPortStatus |= USB_PORT_STAT_RESET;
- rh_status.wPortChange = 0;
- rh_status.wPortChange |= USB_PORT_STAT_C_RESET;
- rh_status.wPortStatus &= ~USB_PORT_STAT_RESET;
- rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
- OK(0);
-
- case USB_PORT_FEAT_POWER:
- rh_status.wPortStatus |= USB_PORT_STAT_POWER;
- OK(0);
-
- case USB_PORT_FEAT_ENABLE:
- rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
- OK(0);
- }
- break;
-
- case RH_SET_ADDRESS:
- root_hub_devnum = wValue;
- OK(0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case USB_DT_DEVICE:
- len = sizeof(sl811_rh_dev_des);
- bufp = sl811_rh_dev_des;
- OK(len);
-
- case USB_DT_CONFIG:
- len = sizeof(sl811_rh_config_des);
- bufp = sl811_rh_config_des;
- OK(len);
-
- case USB_DT_STRING:
- len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength);
- if (len > 0) {
- bufp = data;
- OK(len);
- }
-
- default:
- status = -32;
- }
- break;
-
- case RH_GET_DESCRIPTOR | USB_TYPE_CLASS:
- len = sizeof(sl811_rh_hub_des);
- bufp = sl811_rh_hub_des;
- OK(len);
-
- case RH_GET_CONFIGURATION:
- bufp[0] = 0x01;
- OK(1);
-
- case RH_SET_CONFIGURATION:
- OK(0);
-
- default:
- PDEBUG(1, "unsupported root hub command\n");
- status = -32;
- }
-
- len = min(len, buf_len);
- if (data != bufp)
- memcpy(data, bufp, len);
-
- PDEBUG(5, "len = %d, status = %d\n", len, status);
-
- usb_dev->status = status;
- usb_dev->act_len = len;
-
- return status == 0 ? len : status;
-}
diff --git a/drivers/usb/host/sl811.h b/drivers/usb/host/sl811.h
deleted file mode 100644
index c1f9f013bd1..00000000000
--- a/drivers/usb/host/sl811.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef __UBOOT_SL811_H
-#define __UBOOT_SL811_H
-
-#undef SL811_DEBUG
-
-#ifdef SL811_DEBUG
- #define PDEBUG(level, fmt, args...) \
- if (debug >= (level)) printf("[%s:%d] " fmt, \
- __PRETTY_FUNCTION__, __LINE__ , ## args)
-#else
- #define PDEBUG(level, fmt, args...) do {} while(0)
-#endif
-
-/* Sl811 host control register */
-#define SL811_CTRL_A 0x00
-#define SL811_ADDR_A 0x01
-#define SL811_LEN_A 0x02
-#define SL811_STS_A 0x03 /* read */
-#define SL811_PIDEP_A 0x03 /* write */
-#define SL811_CNT_A 0x04 /* read */
-#define SL811_DEV_A 0x04 /* write */
-#define SL811_CTRL1 0x05
-#define SL811_INTR 0x06
-#define SL811_CTRL_B 0x08
-#define SL811_ADDR_B 0x09
-#define SL811_LEN_B 0x0A
-#define SL811_STS_B 0x0B /* read */
-#define SL811_PIDEP_B 0x0B /* write */
-#define SL811_CNT_B 0x0C /* read */
-#define SL811_DEV_B 0x0C /* write */
-#define SL811_INTRSTS 0x0D /* write clears bitwise */
-#define SL811_HWREV 0x0E /* read */
-#define SL811_SOFLOW 0x0E /* write */
-#define SL811_SOFCNTDIV 0x0F /* read */
-#define SL811_CTRL2 0x0F /* write */
-
-/* USB control register bits (addr 0x00 and addr 0x08) */
-#define SL811_USB_CTRL_ARM 0x01
-#define SL811_USB_CTRL_ENABLE 0x02
-#define SL811_USB_CTRL_DIR_OUT 0x04
-#define SL811_USB_CTRL_ISO 0x10
-#define SL811_USB_CTRL_SOF 0x20
-#define SL811_USB_CTRL_TOGGLE_1 0x40
-#define SL811_USB_CTRL_PREAMBLE 0x80
-
-/* USB status register bits (addr 0x03 and addr 0x0B) */
-#define SL811_USB_STS_ACK 0x01
-#define SL811_USB_STS_ERROR 0x02
-#define SL811_USB_STS_TIMEOUT 0x04
-#define SL811_USB_STS_TOGGLE_1 0x08
-#define SL811_USB_STS_SETUP 0x10
-#define SL811_USB_STS_OVERFLOW 0x20
-#define SL811_USB_STS_NAK 0x40
-#define SL811_USB_STS_STALL 0x80
-
-/* Control register 1 bits (addr 0x05) */
-#define SL811_CTRL1_SOF 0x01
-#define SL811_CTRL1_RESET 0x08
-#define SL811_CTRL1_JKSTATE 0x10
-#define SL811_CTRL1_SPEED_LOW 0x20
-#define SL811_CTRL1_SUSPEND 0x40
-
-/* Interrut enable (addr 0x06) and interrupt status register bits (addr 0x0D) */
-#define SL811_INTR_DONE_A 0x01
-#define SL811_INTR_DONE_B 0x02
-#define SL811_INTR_SOF 0x10
-#define SL811_INTR_INSRMV 0x20
-#define SL811_INTR_DETECT 0x40
-#define SL811_INTR_NOTPRESENT 0x40
-#define SL811_INTR_SPEED_FULL 0x80 /* only in status reg */
-
-/* HW rev and SOF lo register bits (addr 0x0E) */
-#define SL811_HWR_HWREV 0xF0
-
-/* SOF counter and control reg 2 (addr 0x0F) */
-#define SL811_CTL2_SOFHI 0x3F
-#define SL811_CTL2_DSWAP 0x40
-#define SL811_CTL2_HOST 0x80
-
-/* Set up for 1-ms SOF time. */
-#define SL811_12M_LOW 0xE0
-#define SL811_12M_HI 0x2E
-
-#define SL811_DATA_START 0x10
-#define SL811_DATA_LIMIT 240
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-
-
-#define PIDEP(pid, ep) (((pid) & 0x0f) << 4 | (ep))
-
-#endif /* __UBOOT_SL811_H */
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 82/87] imx: Drop CONFIG_USE_PLUGIN
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (80 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 81/87] usb: Drop unused sl811-hcd driver Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:58 ` [PATCH v2 83/87] freescale: Drop unused vsc3316_3308 driver Simon Glass
` (5 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Stefano Babic
This option is not defined anywhere. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/freescale/mx7ulp_evk/Makefile | 4 ----
1 file changed, 4 deletions(-)
diff --git a/board/freescale/mx7ulp_evk/Makefile b/board/freescale/mx7ulp_evk/Makefile
index 686763d6744..9f33c61f03b 100644
--- a/board/freescale/mx7ulp_evk/Makefile
+++ b/board/freescale/mx7ulp_evk/Makefile
@@ -2,7 +2,3 @@
# (C) Copyright 2016 Freescale Semiconductor, Inc.
obj-y := mx7ulp_evk.o
-
-extra-$(CONFIG_USE_PLUGIN) := plugin.bin
-$(obj)/plugin.bin: $(obj)/plugin.o
- $(OBJCOPY) -O binary --gap-fill 0xff $< $@
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 83/87] freescale: Drop unused vsc3316_3308 driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (81 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 82/87] imx: Drop CONFIG_USE_PLUGIN Simon Glass
@ 2023-01-29 0:58 ` Simon Glass
2023-01-29 0:59 ` [PATCH v2 84/87] watchdog: Rename WDT_MPC8xx Simon Glass
` (4 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:58 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/freescale/common/Makefile | 1 -
board/freescale/common/vsc3316_3308.c | 530 --------------------------
2 files changed, 531 deletions(-)
delete mode 100644 board/freescale/common/vsc3316_3308.c
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 5f0503faf8d..c200cf4d403 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_TARGET_MPC8548CDS) += cds_pci_ft.o
obj-$(CONFIG_TARGET_P3041DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P4080DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P5040DS) += ics307_clk.o
-obj-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o
obj-$(CONFIG_ZM7300) += zm7300.o
ifeq ($(CONFIG_$(SPL_)POWER_LEGACY),y)
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c
deleted file mode 100644
index c51f3c5aca2..00000000000
--- a/board/freescale/common/vsc3316_3308.c
+++ /dev/null
@@ -1,530 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
- */
-
-#include "vsc3316_3308.h"
-#include <log.h>
-
-#define REVISION_ID_REG 0x7E
-#define INTERFACE_MODE_REG 0x79
-#define CURRENT_PAGE_REGISTER 0x7F
-#define CONNECTION_CONFIG_PAGE 0x00
-#define INPUT_STATE_REG 0x13
-#define GLOBAL_INPUT_ISE1 0x51
-#define GLOBAL_INPUT_ISE2 0x52
-#define GLOBAL_INPUT_GAIN 0x53
-#define GLOBAL_INPUT_LOS 0x55
-#define GLOBAL_OUTPUT_PE1 0x56
-#define GLOBAL_OUTPUT_PE2 0x57
-#define GLOBAL_OUTPUT_LEVEL 0x58
-#define GLOBAL_OUTPUT_TERMINATION 0x5A
-#define GLOBAL_CORE_CNTRL 0x5D
-#define OUTPUT_MODE_PAGE 0x23
-#define CORE_CONTROL_PAGE 0x25
-#define CORE_CONFIG_REG 0x75
-
-int vsc_if_enable(unsigned int vsc_addr)
-{
- u8 data;
-
- debug("VSC:Configuring VSC at I2C address 0x%2x"
- " for 2-wire interface\n", vsc_addr);
-
- /* enable 2-wire Serial InterFace (I2C) */
- data = 0x02;
-#if CONFIG_IS_ENABLED(DM_I2C)
- int ret, bus_num = 0;
- struct udevice *dev;
-
- ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
- 1, &dev);
- if (ret) {
- printf("%s: Cannot find udev for a bus %d\n", __func__,
- bus_num);
- return ret;
- }
-
- return dm_i2c_write(dev, INTERFACE_MODE_REG, &data, 1);
-#else
- return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
-#endif
-}
-
-int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
- unsigned int num_con)
-{
- unsigned int i;
- u8 rev_id = 0;
- int ret;
-
- debug("VSC:Initializing VSC3316 at I2C address 0x%2x"
- " for Tx\n", vsc_addr);
-
-#if CONFIG_IS_ENABLED(DM_I2C)
- int bus_num = 0;
- struct udevice *dev;
-
- ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
- 1, &dev);
- if (ret) {
- printf("%s: Cannot find udev for a bus %d\n", __func__,
- bus_num);
- return ret;
- }
-
- ret = dm_i2c_read(dev, REVISION_ID_REG, &rev_id, 1);
- if (ret < 0) {
- printf("VSC:0x%x could not read REV_ID from device.\n",
- vsc_addr);
- return ret;
- }
-
- if (rev_id != 0xab) {
- printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
- vsc_addr);
- return -ENODEV;
- }
-
- ret = vsc_if_enable(vsc_addr);
- if (ret) {
- printf("VSC:0x%x could not configured for 2-wire I/F.\n",
- vsc_addr);
- return ret;
- }
-
- /* config connections - page 0x00 */
- dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
-
- /* Making crosspoint connections, by connecting required
- * input to output
- */
- for (i = 0; i < num_con ; i++)
- dm_i2c_reg_write(dev, con_arr[i][1], con_arr[i][0]);
-
- /* input state - page 0x13 */
- dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
- /* Configuring the required input of the switch */
- for (i = 0; i < num_con ; i++)
- dm_i2c_reg_write(dev, con_arr[i][0], 0x80);
-
- /* Setting Global Input LOS threshold value */
- dm_i2c_reg_write(dev, GLOBAL_INPUT_LOS, 0x60);
-
- /* config output mode - page 0x23 */
- dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
- /* Turn ON the Output driver correspond to required output*/
- for (i = 0; i < num_con ; i++)
- dm_i2c_reg_write(dev, con_arr[i][1], 0);
-
- /* configure global core control register, Turn on Global core power */
- dm_i2c_reg_write(dev, GLOBAL_CORE_CNTRL, 0);
-
-#else
- ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
- if (ret < 0) {
- printf("VSC:0x%x could not read REV_ID from device.\n",
- vsc_addr);
- return ret;
- }
-
- if (rev_id != 0xab) {
- printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
- vsc_addr);
- return -ENODEV;
- }
-
- ret = vsc_if_enable(vsc_addr);
- if (ret) {
- printf("VSC:0x%x could not configured for 2-wire I/F.\n",
- vsc_addr);
- return ret;
- }
-
- /* config connections - page 0x00 */
- i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
-
- /* Making crosspoint connections, by connecting required
- * input to output */
- for (i = 0; i < num_con ; i++)
- i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
-
- /* input state - page 0x13 */
- i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
- /* Configuring the required input of the switch */
- for (i = 0; i < num_con ; i++)
- i2c_reg_write(vsc_addr, con_arr[i][0], 0x80);
-
- /* Setting Global Input LOS threshold value */
- i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
-
- /* config output mode - page 0x23 */
- i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
- /* Turn ON the Output driver correspond to required output*/
- for (i = 0; i < num_con ; i++)
- i2c_reg_write(vsc_addr, con_arr[i][1], 0);
-
- /* configure global core control register, Turn on Global core power */
- i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
-#endif
-
- vsc_wp_config(vsc_addr);
-
- return 0;
-}
-
-#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
-int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2],
- unsigned int num_con)
-{
- unsigned int i;
- u8 rev_id = 0;
- int ret;
-
- debug("VSC:Initializing VSC3308 at I2C address 0x%x for Tx\n",
- vsc_addr);
-
-#if CONFIG_IS_ENABLED(DM_I2C)
- int bus_num = 0;
- struct udevice *dev;
-
- ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
- 1, &dev);
- if (ret) {
- printf("%s: Cannot find udev for a bus %d\n", __func__,
- bus_num);
- return ret;
- }
-
- ret = dm_i2c_read(dev, REVISION_ID_REG, &rev_id, 1);
- if (ret < 0) {
- printf("VSC:0x%x could not read REV_ID from device.\n",
- vsc_addr);
- return ret;
- }
-
- if (rev_id != 0xab) {
- printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
- vsc_addr);
- return -ENODEV;
- }
-
- ret = vsc_if_enable(vsc_addr);
- if (ret) {
- printf("VSC:0x%x could not configured for 2-wire I/F.\n",
- vsc_addr);
- return ret;
- }
-
- /* config connections - page 0x00 */
- dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
-
- /* Configure Global Input ISE */
- dm_i2c_reg_write(dev, GLOBAL_INPUT_ISE1, 0);
- dm_i2c_reg_write(dev, GLOBAL_INPUT_ISE2, 0);
-
- /* Configure Tx/Rx Global Output PE1 */
- dm_i2c_reg_write(dev, GLOBAL_OUTPUT_PE1, 0);
-
- /* Configure Tx/Rx Global Output PE2 */
- dm_i2c_reg_write(dev, GLOBAL_OUTPUT_PE2, 0);
-
- /* Configure Tx/Rx Global Input GAIN */
- dm_i2c_reg_write(dev, GLOBAL_INPUT_GAIN, 0x3F);
-
- /* Setting Global Input LOS threshold value */
- dm_i2c_reg_write(dev, GLOBAL_INPUT_LOS, 0xE0);
-
- /* Setting Global output termination */
- dm_i2c_reg_write(dev, GLOBAL_OUTPUT_TERMINATION, 0);
-
- /* Configure Tx/Rx Global Output level */
- if (vsc_addr == VSC3308_TX_ADDRESS)
- dm_i2c_reg_write(dev, GLOBAL_OUTPUT_LEVEL, 4);
- else
- dm_i2c_reg_write(dev, GLOBAL_OUTPUT_LEVEL, 2);
-
- /* Making crosspoint connections, by connecting required
- * input to output
- */
- for (i = 0; i < num_con ; i++)
- dm_i2c_reg_write(dev, con_arr[i][1], con_arr[i][0]);
-
- /* input state - page 0x13 */
- dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
- /* Turning off all the required input of the switch */
- for (i = 0; i < num_con; i++)
- dm_i2c_reg_write(dev, con_arr[i][0], 1);
-
- /* only turn on specific Tx/Rx requested by the XFI erratum */
- if (vsc_addr == VSC3308_TX_ADDRESS) {
- dm_i2c_reg_write(dev, 2, 0);
- dm_i2c_reg_write(dev, 3, 0);
- } else {
- dm_i2c_reg_write(dev, 0, 0);
- dm_i2c_reg_write(dev, 1, 0);
- }
-
- /* config output mode - page 0x23 */
- dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
- /* Turn off the Output driver correspond to required output*/
- for (i = 0; i < num_con ; i++)
- dm_i2c_reg_write(dev, con_arr[i][1], 1);
-
- /* only turn on specific Tx/Rx requested by the XFI erratum */
- if (vsc_addr == VSC3308_TX_ADDRESS) {
- dm_i2c_reg_write(dev, 0, 0);
- dm_i2c_reg_write(dev, 1, 0);
- } else {
- dm_i2c_reg_write(dev, 3, 0);
- dm_i2c_reg_write(dev, 4, 0);
- }
-
- /* configure global core control register, Turn on Global core power */
- dm_i2c_reg_write(dev, GLOBAL_CORE_CNTRL, 0);
-#else
- ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
- if (ret < 0) {
- printf("VSC:0x%x could not read REV_ID from device.\n",
- vsc_addr);
- return ret;
- }
-
- if (rev_id != 0xab) {
- printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
- vsc_addr);
- return -ENODEV;
- }
-
- ret = vsc_if_enable(vsc_addr);
- if (ret) {
- printf("VSC:0x%x could not configured for 2-wire I/F.\n",
- vsc_addr);
- return ret;
- }
-
- /* config connections - page 0x00 */
- i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
-
- /* Configure Global Input ISE */
- i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0);
- i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0);
-
- /* Configure Tx/Rx Global Output PE1 */
- i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE1, 0);
-
- /* Configure Tx/Rx Global Output PE2 */
- i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE2, 0);
-
- /* Configure Tx/Rx Global Input GAIN */
- i2c_reg_write(vsc_addr, GLOBAL_INPUT_GAIN, 0x3F);
-
- /* Setting Global Input LOS threshold value */
- i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0xE0);
-
- /* Setting Global output termination */
- i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_TERMINATION, 0);
-
- /* Configure Tx/Rx Global Output level */
- if (vsc_addr == VSC3308_TX_ADDRESS)
- i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 4);
- else
- i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 2);
-
- /* Making crosspoint connections, by connecting required
- * input to output */
- for (i = 0; i < num_con ; i++)
- i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
-
- /* input state - page 0x13 */
- i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
- /* Turning off all the required input of the switch */
- for (i = 0; i < num_con; i++)
- i2c_reg_write(vsc_addr, con_arr[i][0], 1);
-
- /* only turn on specific Tx/Rx requested by the XFI erratum */
- if (vsc_addr == VSC3308_TX_ADDRESS) {
- i2c_reg_write(vsc_addr, 2, 0);
- i2c_reg_write(vsc_addr, 3, 0);
- } else {
- i2c_reg_write(vsc_addr, 0, 0);
- i2c_reg_write(vsc_addr, 1, 0);
- }
-
- /* config output mode - page 0x23 */
- i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
- /* Turn off the Output driver correspond to required output*/
- for (i = 0; i < num_con ; i++)
- i2c_reg_write(vsc_addr, con_arr[i][1], 1);
-
- /* only turn on specific Tx/Rx requested by the XFI erratum */
- if (vsc_addr == VSC3308_TX_ADDRESS) {
- i2c_reg_write(vsc_addr, 0, 0);
- i2c_reg_write(vsc_addr, 1, 0);
- } else {
- i2c_reg_write(vsc_addr, 3, 0);
- i2c_reg_write(vsc_addr, 4, 0);
- }
-
- /* configure global core control register, Turn on Global core power */
- i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
-#endif
- vsc_wp_config(vsc_addr);
-
- return 0;
-}
-#endif
-
-int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
- unsigned int num_con)
-{
- unsigned int i;
- u8 rev_id = 0;
- int ret;
-
- debug("VSC:Initializing VSC3308 at I2C address 0x%x"
- " for Tx\n", vsc_addr);
-#if CONFIG_IS_ENABLED(DM_I2C)
- int bus_num = 0;
- struct udevice *dev;
-
- ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
- 1, &dev);
- if (ret) {
- printf("%s: Cannot find udev for a bus %d\n", __func__,
- bus_num);
- return ret;
- }
-
- ret = dm_i2c_read(dev, REVISION_ID_REG, &rev_id, 1);
- if (ret < 0) {
- printf("VSC:0x%x could not read REV_ID from device.\n",
- vsc_addr);
- return ret;
- }
-
- if (rev_id != 0xab) {
- printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
- vsc_addr);
- return -ENODEV;
- }
-
- ret = vsc_if_enable(vsc_addr);
- if (ret) {
- printf("VSC:0x%x could not configured for 2-wire I/F.\n",
- vsc_addr);
- return ret;
- }
-
- /* config connections - page 0x00 */
- dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
-
- /* Making crosspoint connections, by connecting required
- * input to output
- */
- for (i = 0; i < num_con ; i++)
- dm_i2c_reg_write(dev, con_arr[i][1], con_arr[i][0]);
-
- /*Configure Global Input ISE and gain */
- dm_i2c_reg_write(dev, GLOBAL_INPUT_ISE1, 0x12);
- dm_i2c_reg_write(dev, GLOBAL_INPUT_ISE2, 0x12);
-
- /* input state - page 0x13 */
- dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
- /* Turning ON the required input of the switch */
- for (i = 0; i < num_con ; i++)
- dm_i2c_reg_write(dev, con_arr[i][0], 0);
-
- /* Setting Global Input LOS threshold value */
- dm_i2c_reg_write(dev, GLOBAL_INPUT_LOS, 0x60);
-
- /* config output mode - page 0x23 */
- dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
- /* Turn ON the Output driver correspond to required output*/
- for (i = 0; i < num_con ; i++)
- dm_i2c_reg_write(dev, con_arr[i][1], 0);
-
- /* configure global core control register, Turn on Global core power */
- dm_i2c_reg_write(dev, GLOBAL_CORE_CNTRL, 0);
-#else
- ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
- if (ret < 0) {
- printf("VSC:0x%x could not read REV_ID from device.\n",
- vsc_addr);
- return ret;
- }
-
- if (rev_id != 0xab) {
- printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
- vsc_addr);
- return -ENODEV;
- }
-
- ret = vsc_if_enable(vsc_addr);
- if (ret) {
- printf("VSC:0x%x could not configured for 2-wire I/F.\n",
- vsc_addr);
- return ret;
- }
-
- /* config connections - page 0x00 */
- i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
-
- /* Making crosspoint connections, by connecting required
- * input to output */
- for (i = 0; i < num_con ; i++)
- i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
-
- /*Configure Global Input ISE and gain */
- i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12);
- i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12);
-
- /* input state - page 0x13 */
- i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
- /* Turning ON the required input of the switch */
- for (i = 0; i < num_con ; i++)
- i2c_reg_write(vsc_addr, con_arr[i][0], 0);
-
- /* Setting Global Input LOS threshold value */
- i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
-
- /* config output mode - page 0x23 */
- i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
- /* Turn ON the Output driver correspond to required output*/
- for (i = 0; i < num_con ; i++)
- i2c_reg_write(vsc_addr, con_arr[i][1], 0);
-
- /* configure global core control register, Turn on Global core power */
- i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
-#endif
- vsc_wp_config(vsc_addr);
-
- return 0;
-}
-
-void vsc_wp_config(unsigned int vsc_addr)
-{
- debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr);
-
- /* For new crosspoint configuration to occur, WP bit of
- * CORE_CONFIG_REG should be set 1 and then reset to 0 */
-#if CONFIG_IS_ENABLED(DM_I2C)
- int ret, bus_num = 0;
- struct udevice *dev;
-
- ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
- 1, &dev);
- if (ret) {
- printf("%s: Cannot find udev for a bus %d\n", __func__,
- bus_num);
- return;
- }
-
- dm_i2c_reg_write(dev, CORE_CONFIG_REG, 0x01);
- dm_i2c_reg_write(dev, CORE_CONFIG_REG, 0x0);
-#else
- i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01);
- i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0);
-#endif
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 84/87] watchdog: Rename WDT_MPC8xx
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (82 preceding siblings ...)
2023-01-29 0:58 ` [PATCH v2 83/87] freescale: Drop unused vsc3316_3308 driver Simon Glass
@ 2023-01-29 0:59 ` Simon Glass
2023-01-29 0:59 ` [PATCH v2 85/87] tools: Drop xway-swap-bytes tool Simon Glass
` (3 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:59 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
CONFIG options must not use lower-case letter. Convert this to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/powerpc/Kconfig | 2 +-
drivers/watchdog/Kconfig | 2 +-
drivers/watchdog/Makefile | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 71d5ea50f54..980f6e10e28 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -30,7 +30,7 @@ config MPC8xx
bool "MPC8xx"
select BOARD_EARLY_INIT_F
imply CMD_REGINFO
- imply WDT_MPC8xx
+ imply WDT_MPC8XX
endchoice
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9218de06e22..33845065cf2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -184,7 +184,7 @@ config WDT_MESON_GXBB
Select this to enable Meson watchdog timer,
which can be found on some Amlogic platforms.
-config WDT_MPC8xx
+config WDT_MPC8XX
bool "MPC8xx watchdog timer support"
depends on WDT && MPC8xx
select HW_WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 446d961d7d2..699aff3fb36 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
obj-$(CONFIG_WDT_GPIO) += gpio_wdt.o
obj-$(CONFIG_WDT_MAX6370) += max6370_wdt.o
obj-$(CONFIG_WDT_MESON_GXBB) += meson_gxbb_wdt.o
-obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
+obj-$(CONFIG_WDT_MPC8XX) += mpc8xx_wdt.o
obj-$(CONFIG_WDT_MT7620) += mt7620_wdt.o
obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 85/87] tools: Drop xway-swap-bytes tool
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (83 preceding siblings ...)
2023-01-29 0:59 ` [PATCH v2 84/87] watchdog: Rename WDT_MPC8xx Simon Glass
@ 2023-01-29 0:59 ` Simon Glass
2023-01-29 0:59 ` [PATCH v2 86/87] freescale: Drop unused zm7300 driver Simon Glass
` (2 subsequent siblings)
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:59 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is very old and does not appear to be used. The CONFIG option
enabling it is no-longer present. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
README | 7 -------
tools/Makefile | 4 ----
tools/xway-swap-bytes.c | 38 --------------------------------------
3 files changed, 49 deletions(-)
delete mode 100644 tools/xway-swap-bytes.c
diff --git a/README b/README
index edce7890c0f..dee0332b0a8 100644
--- a/README
+++ b/README
@@ -286,13 +286,6 @@ The following options need to be configured:
same as CFG_SYS_DDR_SDRAM_BASE for all Power SoCs. But
it could be different for ARM SoCs.
-- MIPS CPU options:
- CONFIG_XWAY_SWAP_BYTES
-
- Enable compilation of tools/xway-swap-bytes needed for Lantiq
- XWAY SoCs for booting from NOR flash. The U-Boot image needs to
- be swapped if a flash programmer is used.
-
- ARM options:
CFG_SYS_EXCEPTION_VECTORS_HIGH
diff --git a/tools/Makefile b/tools/Makefile
index 0eadd8154a7..041c437e65b 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -27,7 +27,6 @@ ifneq ($(HOST_TOOLS_ALL),)
CONFIG_ARCH_KIRKWOOD = y
CONFIG_CMD_LOADS = y
CONFIG_CMD_NET = y
-CONFIG_XWAY_SWAP_BYTES = y
CONFIG_NETCONSOLE = y
CONFIG_ARCH_SUNXI = y
endif
@@ -61,9 +60,6 @@ HOSTCFLAGS_gen_ethaddr_crc.o := -pedantic
hostprogs-$(CONFIG_CMD_LOADS) += img2srec
HOSTCFLAGS_img2srec.o := -pedantic
-hostprogs-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes
-HOSTCFLAGS_xway-swap-bytes.o := -pedantic
-
hostprogs-y += mkenvimage
mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o
diff --git a/tools/xway-swap-bytes.c b/tools/xway-swap-bytes.c
deleted file mode 100644
index 3a6d82d54a0..00000000000
--- a/tools/xway-swap-bytes.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#ifndef BUFSIZ
-# define BUFSIZ 4096
-#endif
-
-#undef BUFSIZ
-# define BUFSIZ 64
-int main (void)
-{
- short ibuff[BUFSIZ], obuff[BUFSIZ];
- int rc, i, len;
-
- while ((rc = read (0, ibuff, sizeof (ibuff))) > 0) {
- memset (obuff, 0, sizeof (obuff));
- for (i = 0; i < (rc + 1) / 2; i++) {
- obuff[i] = ibuff[i ^ 1];
- }
-
- len = (rc + 1) & ~1;
-
- if (write (1, obuff, len) != len) {
- perror ("read error");
- return (EXIT_FAILURE);
- }
-
- memset (ibuff, 0, sizeof (ibuff));
- }
-
- if (rc < 0) {
- perror ("read error");
- return (EXIT_FAILURE);
- }
- return (EXIT_SUCCESS);
-}
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 86/87] freescale: Drop unused zm7300 driver
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (84 preceding siblings ...)
2023-01-29 0:59 ` [PATCH v2 85/87] tools: Drop xway-swap-bytes tool Simon Glass
@ 2023-01-29 0:59 ` Simon Glass
2023-01-29 0:59 ` [PATCH v2 87/87] fdt: Drop use of non-existent OF_PLATDATA option Simon Glass
2023-01-30 18:04 ` [PATCH v2 00/87] Clean up of bad Kconfig options Tom Rini
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:59 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass
This is not used anymore. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
board/freescale/common/Makefile | 1 -
board/freescale/common/zm7300.c | 232 --------------------------------
board/freescale/common/zm7300.h | 21 ---
3 files changed, 254 deletions(-)
delete mode 100644 board/freescale/common/zm7300.c
delete mode 100644 board/freescale/common/zm7300.h
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index c200cf4d403..b4faf6f9e0a 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_TARGET_MPC8548CDS) += cds_pci_ft.o
obj-$(CONFIG_TARGET_P3041DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P4080DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P5040DS) += ics307_clk.o
-obj-$(CONFIG_ZM7300) += zm7300.o
ifeq ($(CONFIG_$(SPL_)POWER_LEGACY),y)
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
endif
diff --git a/board/freescale/common/zm7300.c b/board/freescale/common/zm7300.c
deleted file mode 100644
index e8c2fc85c84..00000000000
--- a/board/freescale/common/zm7300.c
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-/* Power-One ZM7300 DPM */
-#include "zm7300.h"
-#include <log.h>
-
-#define DPM_WP 0x96
-#define WRP_OPCODE 0x01
-#define WRM_OPCODE 0x02
-#define RRP_OPCODE 0x11
-
-#define DPM_SUCCESS 0x01
-#define DPM_EXEC_FAIL 0x00
-
-static const uint16_t hex_to_1_10mv[] = {
- 5000,
- 5125,
- 5250,
- 5375,
- 5500,
- 5625,
- 5750,
- 5875,
- 6000,
- 6125,
- 6250,
- 6375,
- 6500,
- 6625,
- 6750,
- 6875,
- 7000,
- 7125,
- 7250,
- 7375,
- 7500,
- 7625,
- 7750,
- 7875,
- 8000,
- 8125,
- 8250,
- 8375,
- 8500,
- 8625,
- 8750,
- 8875,
- 9000,
- 9125,
- 9250,
- 9375,
- 9500, /* 0.95mV */
- 9625,
- 9750,
- 9875,
- 10000, /* 1.0V */
- 10125,
- 10250,
- 10375,
- 10500,
- 10625,
- 10750,
- 10875,
- 11000,
- 11125,
- 11250,
- 11375,
- 11500,
- 11625,
- 11750,
- 11875,
- 12000,
- 12125,
- 12250,
- 12375,
- 0, /* reserved */
-};
-
-
-/* Read Data d from Register r of POL p */
-u8 dpm_rrp(uchar r)
-{
- u8 ret[5];
-
- ret[0] = RRP_OPCODE;
- /* POL is 0 */
- ret[1] = 0;
- ret[2] = r;
- i2c_read(I2C_DPM_ADDR, 0, -3, ret, 2);
- if (ret[1] == DPM_SUCCESS) { /* the DPM returned success as status */
- debug("RRP_OPCODE returned success data is %x\n", ret[0]);
- return ret[0];
- } else {
- return -1;
- }
-}
-
-/* Write Data d into DPM register r (RAM) */
-int dpm_wrm(u8 r, u8 d)
-{
- u8 ret[5];
-
- ret[0] = WRM_OPCODE;
- ret[1] = r;
- ret[2] = d;
- i2c_read(I2C_DPM_ADDR, 0, -3, ret, 1);
- if (ret[0] == DPM_SUCCESS) { /* the DPM returned success as status */
- debug("WRM_OPCODE returned success data is %x\n", ret[0]);
- return ret[0];
- } else {
- return -1;
- }
-}
-
-/* Write Data d into Register r of POL(s) a */
-int dpm_wrp(u8 r, u8 d)
-{
- u8 ret[7];
-
- ret[0] = WRP_OPCODE;
- /* only POL0 is present */
- ret[1] = 0x01;
- ret[2] = 0x00;
- ret[3] = 0x00;
- ret[4] = 0x00;
- ret[5] = r;
- ret[6] = d;
- i2c_read(I2C_DPM_ADDR, 0, -7, ret, 1);
- if (ret[0] == DPM_SUCCESS) { /* the DPM returned success as status */
- debug("WRP_OPCODE returned success data is %x\n", ret[0]);
- return 0;
- } else {
- return -1;
- }
-}
-
-/* Uses the DPM command RRP */
-u8 zm_read(uchar reg)
-{
- return dpm_rrp(reg);
-}
-
-/* ZM_write --
- Steps:
- a. Write data to the register
- b. Read data from register and compare to written value
- c. Return return_code & voltage_read
-*/
-u8 zm_write(u8 reg, u8 data)
-{
- u8 d;
-
- /* write data to register */
- dpm_wrp(reg, data);
-
- /* read register and compare to written value */
- d = dpm_rrp(reg);
- if (d != data) {
- printf("zm_write : Comparison register data failed\n");
- return -1;
- }
-
- return d;
-}
-
-/* zm_write_out_voltage
- * voltage in 1/10 mV
- */
-int zm_write_voltage(int voltage)
-{
- u8 reg = 0x7, vid;
- uint16_t voltage_read;
- u8 ret;
-
- vid = (voltage - 5000) / ZM_STEP;
-
- ret = zm_write(reg, vid);
- if (ret != -1) {
- voltage_read = hex_to_1_10mv[ret];
- debug("voltage set to %dmV\n", voltage_read/10);
- return voltage_read;
- }
- return -1;
-}
-
-/* zm_read_out_voltage
- * voltage in 1/10 mV
- */
-int zm_read_voltage(void)
-{
- u8 reg = 0x7;
- u8 ret;
- int voltage;
-
- ret = zm_read(reg);
- if (ret != -1) {
- voltage = hex_to_1_10mv[ret];
- debug("Voltage read is %dmV\n", voltage/10);
- return voltage;
- } else {
- return -1;
- }
-}
-
-int zm_disable_wp()
-{
- u8 new_wp_value;
-
- /* Disable using Write-Protect register 0x96 */
- new_wp_value = 0x8;
- if ((dpm_wrm(DPM_WP, new_wp_value)) < 0) {
- printf("Disable Write-Protect register failed\n");
- return -1;
- }
- return 0;
-}
-
-int zm_enable_wp()
-{
- u8 orig_wp_value;
- orig_wp_value = 0x0;
-
- /* Enable using Write-Protect register 0x96 */
- if ((dpm_wrm(DPM_WP, orig_wp_value)) < 0) {
- printf("Enable Write-Protect register failed\n");
- return -1;
- }
- return 0;
-}
diff --git a/board/freescale/common/zm7300.h b/board/freescale/common/zm7300.h
deleted file mode 100644
index 9ce24afc178..00000000000
--- a/board/freescale/common/zm7300.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __ZM7300_H_
-#define __ZM7300_H 1_
-
-#include <common.h>
-#include <i2c.h>
-#include <errno.h>
-#include <asm/io.h>
-
-#define ZM_STEP 125
-int zm7300_set_voltage(int voltage_1_10mv);
-int zm_write_voltage(int voltage);
-int zm_read_voltage(void);
-int zm_disable_wp(void);
-int zm_enable_wp(void);
-
-#endif /* __ZM7300_H_ */
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* [PATCH v2 87/87] fdt: Drop use of non-existent OF_PLATDATA option
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (85 preceding siblings ...)
2023-01-29 0:59 ` [PATCH v2 86/87] freescale: Drop unused zm7300 driver Simon Glass
@ 2023-01-29 0:59 ` Simon Glass
2023-01-30 18:04 ` [PATCH v2 00/87] Clean up of bad Kconfig options Tom Rini
87 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-01-29 0:59 UTC (permalink / raw)
To: U-Boot Mailing List; +Cc: Tom Rini, Simon Glass, Jerry Van Baren
These are only present in SPL. Drop the references to non-SPL versions.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
Changes in v2:
- Drop patch "treewide: Correct invalid Kconfig syntax and warnings"
dts/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/dts/Kconfig b/dts/Kconfig
index bc5f22029ff..44cc6bf1f6f 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -21,8 +21,8 @@ menu "Device Tree Control"
config OF_CONTROL
bool "Run-time configuration via Device Tree"
- select OF_LIBFDT if !OF_PLATDATA
- select OF_REAL if !OF_PLATDATA
+ select OF_LIBFDT
+ select OF_REAL
help
This feature provides for run-time configuration of U-Boot
via a flattened device tree.
--
2.39.1.456.gfc5497dd1b-goog
^ permalink raw reply related [flat|nested] 99+ messages in thread
* Re: [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-01-29 0:57 ` [PATCH v2 09/87] Rename ARCH_NPCM7xx Simon Glass
@ 2023-01-29 21:57 ` Rasmus Villemoes
2023-01-30 15:54 ` Tom Rini
0 siblings, 1 reply; 99+ messages in thread
From: Rasmus Villemoes @ 2023-01-29 21:57 UTC (permalink / raw)
To: Simon Glass, U-Boot Mailing List; +Cc: Tom Rini
On 29/01/2023 01.57, Simon Glass wrote:
> CONFIG options must not use lower-case letter.
Why?
Rasmus
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-01-29 21:57 ` Rasmus Villemoes
@ 2023-01-30 15:54 ` Tom Rini
2023-01-30 21:12 ` Rasmus Villemoes
0 siblings, 1 reply; 99+ messages in thread
From: Tom Rini @ 2023-01-30 15:54 UTC (permalink / raw)
To: Rasmus Villemoes; +Cc: Simon Glass, U-Boot Mailing List
[-- Attachment #1: Type: text/plain, Size: 483 bytes --]
On Sun, Jan 29, 2023 at 10:57:28PM +0100, Rasmus Villemoes wrote:
> On 29/01/2023 01.57, Simon Glass wrote:
> > CONFIG options must not use lower-case letter.
>
> Why?
So, kconfiglib complains about these. However, I can't find a formal
language definition and the kernel documentation doesn't specify, merely
imply that it should always be all uppercase.
Further, I see now that IS_REACHABLE is a kconfig macro, that would
cover our usage of IS_ENABLED.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 00/87] Clean up of bad Kconfig options
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
` (86 preceding siblings ...)
2023-01-29 0:59 ` [PATCH v2 87/87] fdt: Drop use of non-existent OF_PLATDATA option Simon Glass
@ 2023-01-30 18:04 ` Tom Rini
2023-02-01 20:20 ` Simon Glass
87 siblings, 1 reply; 99+ messages in thread
From: Tom Rini @ 2023-01-30 18:04 UTC (permalink / raw)
To: Simon Glass; +Cc: u-boot
[-- Attachment #1: Type: text/plain, Size: 598 bytes --]
On Sat, Jan 28, 2023 at 05:57:36PM -0700, Simon Glass wrote:
> This series adds source scanning to moveconfig.py so that it can look for
> Kconfig options mentioned in the source which do not appear in Kconfig,
> and vice versa.
>
> This tool is then used to clean up the unused or obsolete options
> mentioned in Makefiles, along with any attached source code.
>
> No functional change is intended.
Before I attempt to, have you done a global before / after with buildman
to check for unintentional breakage? buildman --step 0 is quite handy
for things like this :)
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-01-30 15:54 ` Tom Rini
@ 2023-01-30 21:12 ` Rasmus Villemoes
2023-01-30 21:14 ` Tom Rini
2023-01-31 14:16 ` Simon Glass
0 siblings, 2 replies; 99+ messages in thread
From: Rasmus Villemoes @ 2023-01-30 21:12 UTC (permalink / raw)
To: Tom Rini; +Cc: Simon Glass, U-Boot Mailing List, Masahiro Yamada
On 30/01/2023 16.54, Tom Rini wrote:
> On Sun, Jan 29, 2023 at 10:57:28PM +0100, Rasmus Villemoes wrote:
>> On 29/01/2023 01.57, Simon Glass wrote:
>>> CONFIG options must not use lower-case letter.
>>
>> Why?
>
> So, kconfiglib complains about these.
Which IMO would be a bug in kconfiglib. Can you point me at where that
warning is in kconfiglib.py and how it looks and when one would
encounter it?
> However, I can't find a formal
> language definition and the kernel documentation doesn't specify, merely
> imply that it should always be all uppercase.
Well, yes, mostly, but since the de facto specification (namely, the
kernel's implementation) doesn't complain and the kernel's Kconfig files
do contain several examples of config symbols with lowercase characters,
why deviate? In particular, since we share a lot of code, if some piece
of kernel code has an IS_ENABLED(CONFIG_FOO876xx), why make it harder to
import and keep that in sync?
Perhaps we can get Masahiro to tell us whether lowercase characters are
allowed in kconfig symbols or not.
For reference, another kconfig-using project decided to fix their own
infrastructure around kconfig instead of enforcing uppercase symbols:
https://github.com/zephyrproject-rtos/zephyr/issues/40420
Rasmus
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-01-30 21:12 ` Rasmus Villemoes
@ 2023-01-30 21:14 ` Tom Rini
2023-01-31 14:16 ` Simon Glass
1 sibling, 0 replies; 99+ messages in thread
From: Tom Rini @ 2023-01-30 21:14 UTC (permalink / raw)
To: Rasmus Villemoes; +Cc: Simon Glass, U-Boot Mailing List, Masahiro Yamada
[-- Attachment #1: Type: text/plain, Size: 1634 bytes --]
On Mon, Jan 30, 2023 at 10:12:19PM +0100, Rasmus Villemoes wrote:
> On 30/01/2023 16.54, Tom Rini wrote:
> > On Sun, Jan 29, 2023 at 10:57:28PM +0100, Rasmus Villemoes wrote:
> >> On 29/01/2023 01.57, Simon Glass wrote:
> >>> CONFIG options must not use lower-case letter.
> >>
> >> Why?
> >
> > So, kconfiglib complains about these.
>
> Which IMO would be a bug in kconfiglib. Can you point me at where that
> warning is in kconfiglib.py and how it looks and when one would
> encounter it?
>
> > However, I can't find a formal
> > language definition and the kernel documentation doesn't specify, merely
> > imply that it should always be all uppercase.
>
> Well, yes, mostly, but since the de facto specification (namely, the
> kernel's implementation) doesn't complain and the kernel's Kconfig files
> do contain several examples of config symbols with lowercase characters,
> why deviate? In particular, since we share a lot of code, if some piece
> of kernel code has an IS_ENABLED(CONFIG_FOO876xx), why make it harder to
> import and keep that in sync?
>
> Perhaps we can get Masahiro to tell us whether lowercase characters are
> allowed in kconfig symbols or not.
>
> For reference, another kconfig-using project decided to fix their own
> infrastructure around kconfig instead of enforcing uppercase symbols:
>
> https://github.com/zephyrproject-rtos/zephyr/issues/40420
I think it would be very good if the kconfig language itself declared
what does and does not make up a valid symbol. Note that the only thing
complaining in U-Boot today is kconfiglib using tools.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-01-30 21:12 ` Rasmus Villemoes
2023-01-30 21:14 ` Tom Rini
@ 2023-01-31 14:16 ` Simon Glass
2023-02-01 12:19 ` Rasmus Villemoes
1 sibling, 1 reply; 99+ messages in thread
From: Simon Glass @ 2023-01-31 14:16 UTC (permalink / raw)
To: Rasmus Villemoes; +Cc: Tom Rini, U-Boot Mailing List, Masahiro Yamada
Hi Rasmus,
On Mon, 30 Jan 2023 at 14:12, Rasmus Villemoes
<rasmus.villemoes@prevas.dk> wrote:
>
> On 30/01/2023 16.54, Tom Rini wrote:
> > On Sun, Jan 29, 2023 at 10:57:28PM +0100, Rasmus Villemoes wrote:
> >> On 29/01/2023 01.57, Simon Glass wrote:
> >>> CONFIG options must not use lower-case letter.
> >>
> >> Why?
> >
> > So, kconfiglib complains about these.
>
> Which IMO would be a bug in kconfiglib. Can you point me at where that
> warning is in kconfiglib.py and how it looks and when one would
> encounter it?
>
> > However, I can't find a formal
> > language definition and the kernel documentation doesn't specify, merely
> > imply that it should always be all uppercase.
>
> Well, yes, mostly, but since the de facto specification (namely, the
> kernel's implementation) doesn't complain and the kernel's Kconfig files
> do contain several examples of config symbols with lowercase characters,
> why deviate? In particular, since we share a lot of code, if some piece
> of kernel code has an IS_ENABLED(CONFIG_FOO876xx), why make it harder to
> import and keep that in sync?
>
> Perhaps we can get Masahiro to tell us whether lowercase characters are
> allowed in kconfig symbols or not.
>
> For reference, another kconfig-using project decided to fix their own
> infrastructure around kconfig instead of enforcing uppercase symbols:
>
> https://github.com/zephyrproject-rtos/zephyr/issues/40420
That's all good context, thank you.
When we use #define it is normally with an upper-case string. The is
the convention in U-Boot and Linux (and many other projects), I
believe. Also, having lower and upper case strings does become
confusing, and inconsistent.
I was unaware that lower-case was allowed in Linux. It seems there are
35 cases of this in Linux. I'm not sure if any is intended. But
perhaps we should not allow it in U-Boot?
Regards,
Simon
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-01-31 14:16 ` Simon Glass
@ 2023-02-01 12:19 ` Rasmus Villemoes
2023-02-01 15:48 ` Tom Rini
0 siblings, 1 reply; 99+ messages in thread
From: Rasmus Villemoes @ 2023-02-01 12:19 UTC (permalink / raw)
To: Simon Glass; +Cc: Tom Rini, U-Boot Mailing List, Masahiro Yamada
On 31/01/2023 15.16, Simon Glass wrote:
> Hi Rasmus,
>
> On Mon, 30 Jan 2023 at 14:12, Rasmus Villemoes
> <rasmus.villemoes@prevas.dk> wrote:
>>
>> On 30/01/2023 16.54, Tom Rini wrote:
>>> On Sun, Jan 29, 2023 at 10:57:28PM +0100, Rasmus Villemoes wrote:
>>>> On 29/01/2023 01.57, Simon Glass wrote:
>>>>> CONFIG options must not use lower-case letter.
>>>>
>>>> Why?
>>>
>>> So, kconfiglib complains about these.
>>
>> Which IMO would be a bug in kconfiglib. Can you point me at where that
>> warning is in kconfiglib.py and how it looks and when one would
>> encounter it?
>>
>>> However, I can't find a formal
>>> language definition and the kernel documentation doesn't specify, merely
>>> imply that it should always be all uppercase.
>>
>> Well, yes, mostly, but since the de facto specification (namely, the
>> kernel's implementation) doesn't complain and the kernel's Kconfig files
>> do contain several examples of config symbols with lowercase characters,
>> why deviate? In particular, since we share a lot of code, if some piece
>> of kernel code has an IS_ENABLED(CONFIG_FOO876xx), why make it harder to
>> import and keep that in sync?
>>
>> Perhaps we can get Masahiro to tell us whether lowercase characters are
>> allowed in kconfig symbols or not.
>>
>> For reference, another kconfig-using project decided to fix their own
>> infrastructure around kconfig instead of enforcing uppercase symbols:
>>
>> https://github.com/zephyrproject-rtos/zephyr/issues/40420
>
> That's all good context, thank you.
>
> When we use #define it is normally with an upper-case string. The is
> the convention in U-Boot and Linux (and many other projects), I
> believe.
I don't disagree with the "normally", but that very word is precisely my
point: It's not universal, and there can be good reasons to deviate.
Both projects frown upon camelcase, so you don't see a lot of mixed-case
macros, but there's definitely a lot of all-lowercase ones (e.g.
iterators), and to pick just one example of a justified mixed-case one,
there's a "#define RANGE_mA" in some iio device.
Also, having lower and upper case strings does become
> confusing, and inconsistent.
>
> I was unaware that lower-case was allowed in Linux. It seems there are
> 35 cases of this in Linux.
Dunno how you reach that number, I can easily find 174. Among them stuff
like "config FONT_6x11" which is definitely more readable than with an
uppercase X. But yes, either way it's a very small fraction of all
config symbols, but OTOH I highly doubt linux would accept patches to
start renaming those without a very strong reason - it would break
out-of-tree defconfig files.
> But perhaps we should not allow it in U-Boot?
Discourage, definitely, perhaps even add something to checkpatch. But
renaming existing seems to be pointless churn, and definitely needs a
better rationale than "is not allowed" when that is manifestly not true.
Maybe prepend a patch updating codingstyle.rst and amend this to say "is
not allowed by the U-Boot coding standard". Or otherwise please provide
some reference answering my "why".
Rasmus
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-02-01 12:19 ` Rasmus Villemoes
@ 2023-02-01 15:48 ` Tom Rini
2023-02-01 16:22 ` Simon Glass
0 siblings, 1 reply; 99+ messages in thread
From: Tom Rini @ 2023-02-01 15:48 UTC (permalink / raw)
To: Rasmus Villemoes; +Cc: Simon Glass, U-Boot Mailing List, Masahiro Yamada
[-- Attachment #1: Type: text/plain, Size: 3686 bytes --]
On Wed, Feb 01, 2023 at 01:19:51PM +0100, Rasmus Villemoes wrote:
> On 31/01/2023 15.16, Simon Glass wrote:
> > Hi Rasmus,
> >
> > On Mon, 30 Jan 2023 at 14:12, Rasmus Villemoes
> > <rasmus.villemoes@prevas.dk> wrote:
> >>
> >> On 30/01/2023 16.54, Tom Rini wrote:
> >>> On Sun, Jan 29, 2023 at 10:57:28PM +0100, Rasmus Villemoes wrote:
> >>>> On 29/01/2023 01.57, Simon Glass wrote:
> >>>>> CONFIG options must not use lower-case letter.
> >>>>
> >>>> Why?
> >>>
> >>> So, kconfiglib complains about these.
> >>
> >> Which IMO would be a bug in kconfiglib. Can you point me at where that
> >> warning is in kconfiglib.py and how it looks and when one would
> >> encounter it?
> >>
> >>> However, I can't find a formal
> >>> language definition and the kernel documentation doesn't specify, merely
> >>> imply that it should always be all uppercase.
> >>
> >> Well, yes, mostly, but since the de facto specification (namely, the
> >> kernel's implementation) doesn't complain and the kernel's Kconfig files
> >> do contain several examples of config symbols with lowercase characters,
> >> why deviate? In particular, since we share a lot of code, if some piece
> >> of kernel code has an IS_ENABLED(CONFIG_FOO876xx), why make it harder to
> >> import and keep that in sync?
> >>
> >> Perhaps we can get Masahiro to tell us whether lowercase characters are
> >> allowed in kconfig symbols or not.
> >>
> >> For reference, another kconfig-using project decided to fix their own
> >> infrastructure around kconfig instead of enforcing uppercase symbols:
> >>
> >> https://github.com/zephyrproject-rtos/zephyr/issues/40420
> >
> > That's all good context, thank you.
> >
> > When we use #define it is normally with an upper-case string. The is
> > the convention in U-Boot and Linux (and many other projects), I
> > believe.
>
> I don't disagree with the "normally", but that very word is precisely my
> point: It's not universal, and there can be good reasons to deviate.
> Both projects frown upon camelcase, so you don't see a lot of mixed-case
> macros, but there's definitely a lot of all-lowercase ones (e.g.
> iterators), and to pick just one example of a justified mixed-case one,
> there's a "#define RANGE_mA" in some iio device.
>
> Also, having lower and upper case strings does become
> > confusing, and inconsistent.
> >
> > I was unaware that lower-case was allowed in Linux. It seems there are
> > 35 cases of this in Linux.
>
> Dunno how you reach that number, I can easily find 174. Among them stuff
> like "config FONT_6x11" which is definitely more readable than with an
> uppercase X. But yes, either way it's a very small fraction of all
> config symbols, but OTOH I highly doubt linux would accept patches to
> start renaming those without a very strong reason - it would break
> out-of-tree defconfig files.
>
> > But perhaps we should not allow it in U-Boot?
>
> Discourage, definitely, perhaps even add something to checkpatch. But
> renaming existing seems to be pointless churn, and definitely needs a
> better rationale than "is not allowed" when that is manifestly not true.
>
> Maybe prepend a patch updating codingstyle.rst and amend this to say "is
> not allowed by the U-Boot coding standard". Or otherwise please provide
> some reference answering my "why".
I suspect the answer here is that we should:
- Patch (and submit upstream) kconfiglib.py to accept lowercase [a-z] as
valid symbol names, as they are.
- Add a sentence or two to codingstyle.rst about discouraging lowercase,
as suggested by Rasmus
- Drop the rename parts of this series.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-02-01 15:48 ` Tom Rini
@ 2023-02-01 16:22 ` Simon Glass
2023-02-01 17:26 ` Simon Glass
0 siblings, 1 reply; 99+ messages in thread
From: Simon Glass @ 2023-02-01 16:22 UTC (permalink / raw)
To: Tom Rini; +Cc: Rasmus Villemoes, U-Boot Mailing List, Masahiro Yamada
Hi,
On Wed, 1 Feb 2023 at 08:48, Tom Rini <trini@konsulko.com> wrote:
>
> On Wed, Feb 01, 2023 at 01:19:51PM +0100, Rasmus Villemoes wrote:
> > On 31/01/2023 15.16, Simon Glass wrote:
> > > Hi Rasmus,
> > >
> > > On Mon, 30 Jan 2023 at 14:12, Rasmus Villemoes
> > > <rasmus.villemoes@prevas.dk> wrote:
> > >>
> > >> On 30/01/2023 16.54, Tom Rini wrote:
> > >>> On Sun, Jan 29, 2023 at 10:57:28PM +0100, Rasmus Villemoes wrote:
> > >>>> On 29/01/2023 01.57, Simon Glass wrote:
> > >>>>> CONFIG options must not use lower-case letter.
> > >>>>
> > >>>> Why?
> > >>>
> > >>> So, kconfiglib complains about these.
> > >>
> > >> Which IMO would be a bug in kconfiglib. Can you point me at where that
> > >> warning is in kconfiglib.py and how it looks and when one would
> > >> encounter it?
> > >>
> > >>> However, I can't find a formal
> > >>> language definition and the kernel documentation doesn't specify, merely
> > >>> imply that it should always be all uppercase.
> > >>
> > >> Well, yes, mostly, but since the de facto specification (namely, the
> > >> kernel's implementation) doesn't complain and the kernel's Kconfig files
> > >> do contain several examples of config symbols with lowercase characters,
> > >> why deviate? In particular, since we share a lot of code, if some piece
> > >> of kernel code has an IS_ENABLED(CONFIG_FOO876xx), why make it harder to
> > >> import and keep that in sync?
> > >>
> > >> Perhaps we can get Masahiro to tell us whether lowercase characters are
> > >> allowed in kconfig symbols or not.
> > >>
> > >> For reference, another kconfig-using project decided to fix their own
> > >> infrastructure around kconfig instead of enforcing uppercase symbols:
> > >>
> > >> https://github.com/zephyrproject-rtos/zephyr/issues/40420
> > >
> > > That's all good context, thank you.
> > >
> > > When we use #define it is normally with an upper-case string. The is
> > > the convention in U-Boot and Linux (and many other projects), I
> > > believe.
> >
> > I don't disagree with the "normally", but that very word is precisely my
> > point: It's not universal, and there can be good reasons to deviate.
> > Both projects frown upon camelcase, so you don't see a lot of mixed-case
> > macros, but there's definitely a lot of all-lowercase ones (e.g.
> > iterators), and to pick just one example of a justified mixed-case one,
> > there's a "#define RANGE_mA" in some iio device.
> >
> > Also, having lower and upper case strings does become
> > > confusing, and inconsistent.
> > >
> > > I was unaware that lower-case was allowed in Linux. It seems there are
> > > 35 cases of this in Linux.
> >
> > Dunno how you reach that number, I can easily find 174. Among them stuff
Yes I was missing an underscore.
git grep -E "CONFIG_([A-Za-z0-9_]*)\b" |sed -n
"s/.*\bCONFIG_\([A-Za-z0-9_]*\)\b.*/\1/p" | sort |uniq | grep
"[a-z]" |wc -l
187
But some are not real.
> > like "config FONT_6x11" which is definitely more readable than with an
> > uppercase X. But yes, either way it's a very small fraction of all
> > config symbols, but OTOH I highly doubt linux would accept patches to
> > start renaming those without a very strong reason - it would break
> > out-of-tree defconfig files.
FONT_6X11 isn't that bad :-)
> >
> > > But perhaps we should not allow it in U-Boot?
> >
> > Discourage, definitely, perhaps even add something to checkpatch. But
> > renaming existing seems to be pointless churn, and definitely needs a
> > better rationale than "is not allowed" when that is manifestly not true.
> >
> > Maybe prepend a patch updating codingstyle.rst and amend this to say "is
> > not allowed by the U-Boot coding standard". Or otherwise please provide
> > some reference answering my "why".
OK would you like to have a crack at these?
>
> I suspect the answer here is that we should:
> - Patch (and submit upstream) kconfiglib.py to accept lowercase [a-z] as
> valid symbol names, as they are.
That project is dead, unfortunately. I've had a PR outstanding for
over a year. It looks like someone here might take it on, once we can
figure out naming, etc.
Rasmus, would you like to take a look at the one in U-Boot?
Here is what Zephyr did:
https://github.com/zephyrproject-rtos/zephyr/issues/40420
> - Add a sentence or two to codingstyle.rst about discouraging lowercase,
> as suggested by Rasmus
> - Drop the rename parts of this series.
If people still want lower case that's OK with me. We have so few I
felt it was just confusing, plus the fact that the widely use
kconfiglib doesn't support it...
Regards,
Simon
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 09/87] Rename ARCH_NPCM7xx
2023-02-01 16:22 ` Simon Glass
@ 2023-02-01 17:26 ` Simon Glass
0 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-02-01 17:26 UTC (permalink / raw)
To: Tom Rini; +Cc: Rasmus Villemoes, U-Boot Mailing List, Masahiro Yamada
Hi,
On Wed, 1 Feb 2023 at 09:22, Simon Glass <sjg@chromium.org> wrote:
>
> Hi,
>
> On Wed, 1 Feb 2023 at 08:48, Tom Rini <trini@konsulko.com> wrote:
> >
> > On Wed, Feb 01, 2023 at 01:19:51PM +0100, Rasmus Villemoes wrote:
> > > On 31/01/2023 15.16, Simon Glass wrote:
> > > > Hi Rasmus,
> > > >
> > > > On Mon, 30 Jan 2023 at 14:12, Rasmus Villemoes
> > > > <rasmus.villemoes@prevas.dk> wrote:
> > > >>
> > > >> On 30/01/2023 16.54, Tom Rini wrote:
> > > >>> On Sun, Jan 29, 2023 at 10:57:28PM +0100, Rasmus Villemoes wrote:
> > > >>>> On 29/01/2023 01.57, Simon Glass wrote:
> > > >>>>> CONFIG options must not use lower-case letter.
> > > >>>>
> > > >>>> Why?
> > > >>>
> > > >>> So, kconfiglib complains about these.
> > > >>
> > > >> Which IMO would be a bug in kconfiglib. Can you point me at where that
> > > >> warning is in kconfiglib.py and how it looks and when one would
> > > >> encounter it?
> > > >>
> > > >>> However, I can't find a formal
> > > >>> language definition and the kernel documentation doesn't specify, merely
> > > >>> imply that it should always be all uppercase.
> > > >>
> > > >> Well, yes, mostly, but since the de facto specification (namely, the
> > > >> kernel's implementation) doesn't complain and the kernel's Kconfig files
> > > >> do contain several examples of config symbols with lowercase characters,
> > > >> why deviate? In particular, since we share a lot of code, if some piece
> > > >> of kernel code has an IS_ENABLED(CONFIG_FOO876xx), why make it harder to
> > > >> import and keep that in sync?
> > > >>
> > > >> Perhaps we can get Masahiro to tell us whether lowercase characters are
> > > >> allowed in kconfig symbols or not.
> > > >>
> > > >> For reference, another kconfig-using project decided to fix their own
> > > >> infrastructure around kconfig instead of enforcing uppercase symbols:
> > > >>
> > > >> https://github.com/zephyrproject-rtos/zephyr/issues/40420
> > > >
> > > > That's all good context, thank you.
> > > >
> > > > When we use #define it is normally with an upper-case string. The is
> > > > the convention in U-Boot and Linux (and many other projects), I
> > > > believe.
> > >
> > > I don't disagree with the "normally", but that very word is precisely my
> > > point: It's not universal, and there can be good reasons to deviate.
> > > Both projects frown upon camelcase, so you don't see a lot of mixed-case
> > > macros, but there's definitely a lot of all-lowercase ones (e.g.
> > > iterators), and to pick just one example of a justified mixed-case one,
> > > there's a "#define RANGE_mA" in some iio device.
> > >
> > > Also, having lower and upper case strings does become
> > > > confusing, and inconsistent.
> > > >
> > > > I was unaware that lower-case was allowed in Linux. It seems there are
> > > > 35 cases of this in Linux.
> > >
> > > Dunno how you reach that number, I can easily find 174. Among them stuff
>
> Yes I was missing an underscore.
>
> git grep -E "CONFIG_([A-Za-z0-9_]*)\b" |sed -n
> "s/.*\bCONFIG_\([A-Za-z0-9_]*\)\b.*/\1/p" | sort |uniq | grep
> "[a-z]" |wc -l
> 187
>
> But some are not real.
>
> > > like "config FONT_6x11" which is definitely more readable than with an
> > > uppercase X. But yes, either way it's a very small fraction of all
> > > config symbols, but OTOH I highly doubt linux would accept patches to
> > > start renaming those without a very strong reason - it would break
> > > out-of-tree defconfig files.
>
> FONT_6X11 isn't that bad :-)
>
> > >
> > > > But perhaps we should not allow it in U-Boot?
> > >
> > > Discourage, definitely, perhaps even add something to checkpatch. But
> > > renaming existing seems to be pointless churn, and definitely needs a
> > > better rationale than "is not allowed" when that is manifestly not true.
> > >
> > > Maybe prepend a patch updating codingstyle.rst and amend this to say "is
> > > not allowed by the U-Boot coding standard". Or otherwise please provide
> > > some reference answering my "why".
>
> OK would you like to have a crack at these?
>
> >
> > I suspect the answer here is that we should:
> > - Patch (and submit upstream) kconfiglib.py to accept lowercase [a-z] as
> > valid symbol names, as they are.
>
> That project is dead, unfortunately. I've had a PR outstanding for
> over a year. It looks like someone here might take it on, once we can
> figure out naming, etc.
>
> Rasmus, would you like to take a look at the one in U-Boot?
>
> Here is what Zephyr did:
>
> https://github.com/zephyrproject-rtos/zephyr/issues/40420
>
> > - Add a sentence or two to codingstyle.rst about discouraging lowercase,
> > as suggested by Rasmus
> > - Drop the rename parts of this series.
>
> If people still want lower case that's OK with me. We have so few I
> felt it was just confusing, plus the fact that the widely use
> kconfiglib doesn't support it...
Actually that's not true, it does support lower-case Kconfig options,
or at least the one we do does. I'll send a v3 with these patches
dropped.
Regards,
Simon
^ permalink raw reply [flat|nested] 99+ messages in thread
* Re: [PATCH v2 00/87] Clean up of bad Kconfig options
2023-01-30 18:04 ` [PATCH v2 00/87] Clean up of bad Kconfig options Tom Rini
@ 2023-02-01 20:20 ` Simon Glass
0 siblings, 0 replies; 99+ messages in thread
From: Simon Glass @ 2023-02-01 20:20 UTC (permalink / raw)
To: Tom Rini; +Cc: u-boot
Hi Tom,
On Mon, 30 Jan 2023 at 11:04, Tom Rini <trini@konsulko.com> wrote:
>
> On Sat, Jan 28, 2023 at 05:57:36PM -0700, Simon Glass wrote:
>
> > This series adds source scanning to moveconfig.py so that it can look for
> > Kconfig options mentioned in the source which do not appear in Kconfig,
> > and vice versa.
> >
> > This tool is then used to clean up the unused or obsolete options
> > mentioned in Makefiles, along with any attached source code.
> >
> > No functional change is intended.
>
> Before I attempt to, have you done a global before / after with buildman
> to check for unintentional breakage? buildman --step 0 is quite handy
> for things like this :)
I did this and found a size change that I had not noticed, which I fixed.
Regards,
SImon
^ permalink raw reply [flat|nested] 99+ messages in thread
end of thread, other threads:[~2023-02-01 20:21 UTC | newest]
Thread overview: 99+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-29 0:57 [PATCH v2 00/87] Clean up of bad Kconfig options Simon Glass
2023-01-29 0:57 ` [PATCH v2 01/87] moveconfig: Add an option to compare Kconfig against source Simon Glass
2023-01-29 0:57 ` [PATCH v2 02/87] power: Drop fg_max77693 Simon Glass
2023-01-29 0:57 ` [PATCH v2 03/87] nand: Drop CONFIG_NAND_SPEAR Simon Glass
2023-01-29 0:57 ` [PATCH v2 04/87] power: Drop pmic_max77693.c Simon Glass
2023-01-29 0:57 ` [PATCH v2 05/87] gpio: Drop adi_gpio2 Simon Glass
2023-01-29 0:57 ` [PATCH v2 06/87] Makefile: Drop CONFIG_AIS_CONFIG_FILE Simon Glass
2023-01-29 0:57 ` [PATCH v2 07/87] misc: Drop ali512x Simon Glass
2023-01-29 0:57 ` [PATCH v2 08/87] sandbox: Drop reference to CONFIG_ARCH_DEVICE_TREE Simon Glass
2023-01-29 0:57 ` [PATCH v2 09/87] Rename ARCH_NPCM7xx Simon Glass
2023-01-29 21:57 ` Rasmus Villemoes
2023-01-30 15:54 ` Tom Rini
2023-01-30 21:12 ` Rasmus Villemoes
2023-01-30 21:14 ` Tom Rini
2023-01-31 14:16 ` Simon Glass
2023-02-01 12:19 ` Rasmus Villemoes
2023-02-01 15:48 ` Tom Rini
2023-02-01 16:22 ` Simon Glass
2023-02-01 17:26 ` Simon Glass
2023-01-29 0:57 ` [PATCH v2 10/87] arm: mvebu: Remove reference to ARMADA_370 Simon Glass
2023-01-29 0:57 ` [PATCH v2 11/87] arm: mvebu: Drop reference to CONFIG_ARMADA_39X Simon Glass
2023-01-29 0:57 ` [PATCH v2 12/87] ppc: Drop bat_rw Simon Glass
2023-01-29 0:57 ` [PATCH v2 13/87] rockchip: Correct a reference to CONFIG_BOOT_MODE_REG Simon Glass
2023-01-29 0:57 ` [PATCH v2 14/87] cmd: Add an option to enable the ini command Simon Glass
2023-01-29 0:57 ` [PATCH v2 15/87] cmd: Drop mfsl command Simon Glass
2023-01-29 0:57 ` [PATCH v2 16/87] Correct CONFIG_CONTROLCENTERDC Simon Glass
2023-01-29 0:57 ` [PATCH v2 17/87] Drop dataflash_mmc_mux command Simon Glass
2023-01-29 0:57 ` [PATCH v2 18/87] Drop CONFIG_DM644X_GPIO Simon Glass
2023-01-29 0:57 ` [PATCH v2 19/87] Makefile: Avoid use of invalid CONFIG_ option Simon Glass
2023-01-29 0:57 ` [PATCH v2 20/87] env: Drop ENV_IS_IN_SATA Simon Glass
2023-01-29 0:57 ` [PATCH v2 21/87] samsung: Drop CONFIG_EXYNOS_PWM_BL Simon Glass
2023-01-29 0:57 ` [PATCH v2 22/87] fpga: Add a LATTICE option Simon Glass
2023-01-29 0:57 ` [PATCH v2 23/87] fpga: Add a FPGA_STRATIX_II option Simon Glass
2023-01-29 0:58 ` [PATCH v2 24/87] misc: Drop mc9sdz60 driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 25/87] freescale: Drop unused pixis code Simon Glass
2023-01-29 0:58 ` [PATCH v2 26/87] freescale: Drop unused ftpmu010 driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 27/87] rcar: Drop timer Simon Glass
2023-01-29 0:58 ` [PATCH v2 28/87] i2c: Rename I2C_MUX_PCA954x Simon Glass
2023-01-29 0:58 ` [PATCH v2 29/87] imx: Drop unused CONFIG_IMX Simon Glass
2023-01-29 0:58 ` [PATCH v2 30/87] arm: Drop old kona code Simon Glass
2023-01-29 0:58 ` [PATCH v2 31/87] video: Drop unused lg4573 driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 32/87] m68k: Drop unused CONFIG_M52277 Simon Glass
2023-01-29 0:58 ` [PATCH v2 33/87] m68k: Rename MCF5301x Simon Glass
2023-01-29 0:58 ` [PATCH v2 34/87] m68k: Rename MCF532x Simon Glass
2023-01-29 0:58 ` [PATCH v2 35/87] m68k: Rename MCF5441x Simon Glass
2023-01-29 0:58 ` [PATCH v2 36/87] m68k: Drop unused CONFIG_MACH_DAVINCI_DA830_EVM Simon Glass
2023-01-29 0:58 ` [PATCH v2 37/87] arm: Drop CONFIG_MMU Simon Glass
2023-01-29 0:58 ` [PATCH v2 38/87] arc: " Simon Glass
2023-01-29 0:58 ` [PATCH v2 39/87] ppc: Rename MPC83xx Simon Glass
2023-01-29 0:58 ` [PATCH v2 40/87] gpio: Drop unused mpc83xx_gpio driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 41/87] ppc: Rename MPC85xx Simon Glass
2023-01-29 0:58 ` [PATCH v2 42/87] powerpc: Rename MPC86xx Simon Glass
2023-01-29 0:58 ` [PATCH v2 43/87] imx: Rename CONFIG_MXS to CFG_MXS Simon Glass
2023-01-29 0:58 ` [PATCH v2 44/87] nand: Drop unused actl_nand driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 45/87] mtd: Drop unused fsl_upm driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 46/87] mtd: Drop unused fsmc_nand driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 47/87] mtd: Drop unused kb9202_nand driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 48/87] mtd: Drop unused nand_plat driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 49/87] Makefile: Drop CONFIG_OF_EARLY_FLATTREE Simon Glass
2023-01-29 0:58 ` [PATCH v2 50/87] omap: Drop unused CONFIG_OMAP_USB_PHY Simon Glass
2023-01-29 0:58 ` [PATCH v2 51/87] mtd: Drop unused CONFIG_ONENAND_U_BOOT Simon Glass
2023-01-29 0:58 ` [PATCH v2 52/87] ppc: Drop unused CONFIG_P2020DS Simon Glass
2023-01-29 0:58 ` [PATCH v2 53/87] gpio: Drop unused pca9698 driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 54/87] samsung: Rename PINCTRL_EXYNOS78x0 Simon Glass
2023-01-29 0:58 ` [PATCH v2 55/87] power: Drop unused bat_trats driver and battery code Simon Glass
2023-01-29 0:58 ` [PATCH v2 56/87] power: Drop unused fg_max17042 driver and fuel gauge code Simon Glass
2023-01-29 0:58 ` [PATCH v2 57/87] power: Drop unused muic_max77693 driver and mfd code Simon Glass
2023-01-29 0:58 ` [PATCH v2 58/87] power: Drop unused muic_max8997 driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 59/87] freescale: Drop unused pq-mds-pib driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 60/87] rmobile: Drop CONFIG_RMOBILE Simon Glass
2023-01-29 0:58 ` [PATCH v2 61/87] rtc: Drop old and unused drivers Simon Glass
2023-01-29 0:58 ` [PATCH v2 62/87] mtd: Drop unused CONFIG_S32V234 Simon Glass
2023-01-29 0:58 ` [PATCH v2 63/87] mtd: Drop unused scf0403_lcd driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 64/87] rmobile: Drop CONFIG_SH73A0 and associated code Simon Glass
2023-01-29 0:58 ` [PATCH v2 65/87] sh4: Drop unused pci_sh7780 driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 66/87] Drop ubsha1 tool Simon Glass
2023-01-29 0:58 ` [PATCH v2 67/87] arm: Rename STM32MP13x Simon Glass
2023-01-29 0:58 ` [PATCH v2 68/87] arm: Rename STM32MP15x Simon Glass
2023-01-29 0:58 ` [PATCH v2 69/87] sysreset: at91: Correct Makefile rule for SYSRESET_AT91 Simon Glass
2023-01-29 0:58 ` [PATCH v2 70/87] gdsys: Drop unused fpga file Simon Glass
2023-01-29 0:58 ` [PATCH v2 71/87] sh4: Drop unused kona_i2c driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 72/87] compulab: Drop CONFIG_TARGET_MCM_IMX8M_MINI Simon Glass
2023-01-29 0:58 ` [PATCH v2 73/87] freescale: Drop CONFIG_TARGET_MPC8536DS et al Simon Glass
2023-01-29 0:58 ` [PATCH v2 74/87] sh4: Drop unused twl6030 driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 75/87] ppc: Makefile: Drop unused ppc4xx code Simon Glass
2023-01-29 0:58 ` [PATCH v2 76/87] armada: usb: net: Drop unused USB drivers Simon Glass
2023-01-29 0:58 ` [PATCH v2 77/87] usb: Drop unused ehci-faraday driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 78/87] usb: Drop unused fotg210 gadget Simon Glass
2023-01-29 0:58 ` [PATCH v2 79/87] rmobile: Drop unused ehci-rmobile driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 80/87] usb: Drop unused ehci-vct driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 81/87] usb: Drop unused sl811-hcd driver Simon Glass
2023-01-29 0:58 ` [PATCH v2 82/87] imx: Drop CONFIG_USE_PLUGIN Simon Glass
2023-01-29 0:58 ` [PATCH v2 83/87] freescale: Drop unused vsc3316_3308 driver Simon Glass
2023-01-29 0:59 ` [PATCH v2 84/87] watchdog: Rename WDT_MPC8xx Simon Glass
2023-01-29 0:59 ` [PATCH v2 85/87] tools: Drop xway-swap-bytes tool Simon Glass
2023-01-29 0:59 ` [PATCH v2 86/87] freescale: Drop unused zm7300 driver Simon Glass
2023-01-29 0:59 ` [PATCH v2 87/87] fdt: Drop use of non-existent OF_PLATDATA option Simon Glass
2023-01-30 18:04 ` [PATCH v2 00/87] Clean up of bad Kconfig options Tom Rini
2023-02-01 20:20 ` Simon Glass
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.