[RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Xiangsheng Hou]

This patch series add MediaTek MT7986 SPI NAND and ECC controller
support, split ECC engine with rawnand controller in bindings and
change to YAML schema.

Changes since V4:
 - Split arm and arm64 dts patch for fix existing NAND controller node name.

Changes since V3:
 - Correct mediatek,mtk-nfc.yaml dt-bindings.

Changes since V2:
 - Change ECC err_mask value with GENMASK macro.
 - Change snfi mediatek,rx-latch-latency to mediatek,rx-latch-latency-ns.
 - Add a separate patch for DTS change.
 - Move common description to top-level pattern properties.
 - Drop redundant parts in dt-bindings.

Changes since V1:
 - Use existing sample delay property.
 - Add restricting for optional nfi_hclk.
 - Improve and perfect dt-bindings documentation.
 - Change existing node name to match NAND controller DT bingings.
 - Fix issues reported by dt_binding_check.
 - Fix issues reported by dtbs_check.

Xiangsheng Hou (10):
  spi: mtk-snfi: Change default page format to setup default setting
  spi: mtk-snfi: Add optional nfi_hclk which is needed for MT7986
  mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
  dt-bindings: spi: mtk-snfi: Add compatible for MT7986
  spi: mtk-snfi: Add snfi sample delay and read latency adjustment
  dt-bindings: spi: mtk-snfi: Add read latch latency property
  dt-bindings: mtd: Split ECC engine with rawnand controller
  arm64: dts: mediatek: Fix existing NAND controller node name
  arm: dts: mediatek: Fix existing NAND controller node name
  dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986

 .../bindings/mtd/mediatek,mtk-nfc.yaml        | 155 +++++++++++++++
 .../mtd/mediatek,nand-ecc-engine.yaml         |  63 +++++++
 .../devicetree/bindings/mtd/mtk-nand.txt      | 176 ------------------
 .../bindings/spi/mediatek,spi-mtk-snfi.yaml   |  54 +++++-
 arch/arm/boot/dts/mt2701.dtsi                 |   2 +-
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi     |   2 +-
 arch/arm64/boot/dts/mediatek/mt7622.dtsi      |   2 +-
 drivers/mtd/nand/ecc-mtk.c                    |  28 ++-
 drivers/spi/spi-mtk-snfi.c                    |  41 +++-
 9 files changed, 330 insertions(+), 193 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
 create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt

-- 
2.25.1

[RESEND PATCH v5 01/10] spi: mtk-snfi: Change default page format to setup default setting

[Xiangsheng Hou]

Change default page format to setup default setting since the sector
size 1024 on MT7986 will lead to probe fail.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
---
 drivers/spi/spi-mtk-snfi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/spi/spi-mtk-snfi.c b/drivers/spi/spi-mtk-snfi.c
index fa8412ba20e2..719fc6f53ab1 100644
--- a/drivers/spi/spi-mtk-snfi.c
+++ b/drivers/spi/spi-mtk-snfi.c
@@ -1430,8 +1430,7 @@ static int mtk_snand_probe(struct platform_device *pdev)
 
 	// setup an initial page format for ops matching page_cache_op template
 	// before ECC is called.
-	ret = mtk_snand_setup_pagefmt(ms, ms->caps->sector_size,
-				      ms->caps->spare_sizes[0]);
+	ret = mtk_snand_setup_pagefmt(ms, SZ_2K, SZ_64);
 	if (ret) {
 		dev_err(ms->dev, "failed to set initial page format\n");
 		goto disable_clk;
-- 
2.25.1

[RESEND PATCH v5 02/10] spi: mtk-snfi: Add optional nfi_hclk which is needed for MT7986

[Xiangsheng Hou]

Add optional nfi_hclk which is needed for MT7986.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/spi/spi-mtk-snfi.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/spi/spi-mtk-snfi.c b/drivers/spi/spi-mtk-snfi.c
index 719fc6f53ab1..85644308df23 100644
--- a/drivers/spi/spi-mtk-snfi.c
+++ b/drivers/spi/spi-mtk-snfi.c
@@ -297,6 +297,7 @@ struct mtk_snand {
 	struct device *dev;
 	struct clk *nfi_clk;
 	struct clk *pad_clk;
+	struct clk *nfi_hclk;
 	void __iomem *nfi_base;
 	int irq;
 	struct completion op_done;
@@ -1339,7 +1340,16 @@ static int mtk_snand_enable_clk(struct mtk_snand *ms)
 		dev_err(ms->dev, "unable to enable pad clk\n");
 		goto err1;
 	}
+	ret = clk_prepare_enable(ms->nfi_hclk);
+	if (ret) {
+		dev_err(ms->dev, "unable to enable nfi hclk\n");
+		goto err2;
+	}
+
 	return 0;
+
+err2:
+	clk_disable_unprepare(ms->pad_clk);
 err1:
 	clk_disable_unprepare(ms->nfi_clk);
 	return ret;
@@ -1347,6 +1357,7 @@ static int mtk_snand_enable_clk(struct mtk_snand *ms)
 
 static void mtk_snand_disable_clk(struct mtk_snand *ms)
 {
+	clk_disable_unprepare(ms->nfi_hclk);
 	clk_disable_unprepare(ms->pad_clk);
 	clk_disable_unprepare(ms->nfi_clk);
 }
@@ -1401,6 +1412,13 @@ static int mtk_snand_probe(struct platform_device *pdev)
 		goto release_ecc;
 	}
 
+	ms->nfi_hclk = devm_clk_get_optional(&pdev->dev, "nfi_hclk");
+	if (IS_ERR(ms->nfi_hclk)) {
+		ret = PTR_ERR(ms->nfi_hclk);
+		dev_err(&pdev->dev, "unable to get nfi_hclk, err = %d\n", ret);
+		goto release_ecc;
+	}
+
 	ret = mtk_snand_enable_clk(ms);
 	if (ret)
 		goto release_ecc;
-- 
2.25.1

[RESEND PATCH v5 03/10] mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC

[Xiangsheng Hou]

Add ECC support fot MT7986 IC, and change err_mask value with
GENMASK macro.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/mtd/nand/ecc-mtk.c | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/ecc-mtk.c b/drivers/mtd/nand/ecc-mtk.c
index 9f9b201fe706..c75bb8b80cc1 100644
--- a/drivers/mtd/nand/ecc-mtk.c
+++ b/drivers/mtd/nand/ecc-mtk.c
@@ -40,6 +40,10 @@
 #define ECC_IDLE_REG(op)	((op) == ECC_ENCODE ? ECC_ENCIDLE : ECC_DECIDLE)
 #define ECC_CTL_REG(op)		((op) == ECC_ENCODE ? ECC_ENCCON : ECC_DECCON)
 
+#define ECC_ERRMASK_MT7622	GENMASK(4, 0)
+#define ECC_ERRMASK_MT2701	GENMASK(5, 0)
+#define ECC_ERRMASK_MT2712	GENMASK(6, 0)
+
 struct mtk_ecc_caps {
 	u32 err_mask;
 	u32 err_shift;
@@ -79,6 +83,10 @@ static const u8 ecc_strength_mt7622[] = {
 	4, 6, 8, 10, 12
 };
 
+static const u8 ecc_strength_mt7986[] = {
+	4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
+};
+
 enum mtk_ecc_regs {
 	ECC_ENCPAR00,
 	ECC_ENCIRQ_EN,
@@ -451,7 +459,7 @@ unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc)
 EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
 
 static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
-	.err_mask = 0x3f,
+	.err_mask = ECC_ERRMASK_MT2701,
 	.err_shift = 8,
 	.ecc_strength = ecc_strength_mt2701,
 	.ecc_regs = mt2701_ecc_regs,
@@ -462,7 +470,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
 };
 
 static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
-	.err_mask = 0x7f,
+	.err_mask = ECC_ERRMASK_MT2712,
 	.err_shift = 8,
 	.ecc_strength = ecc_strength_mt2712,
 	.ecc_regs = mt2712_ecc_regs,
@@ -473,7 +481,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
 };
 
 static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
-	.err_mask = 0x1f,
+	.err_mask = ECC_ERRMASK_MT7622,
 	.err_shift = 5,
 	.ecc_strength = ecc_strength_mt7622,
 	.ecc_regs = mt7622_ecc_regs,
@@ -483,6 +491,17 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
 	.pg_irq_sel = 0,
 };
 
+static const struct mtk_ecc_caps mtk_ecc_caps_mt7986 = {
+	.err_mask = ECC_ERRMASK_MT7622,
+	.err_shift = 8,
+	.ecc_strength = ecc_strength_mt7986,
+	.ecc_regs = mt2712_ecc_regs,
+	.num_ecc_strength = 11,
+	.ecc_mode_shift = 5,
+	.parity_bits = 14,
+	.pg_irq_sel = 1,
+};
+
 static const struct of_device_id mtk_ecc_dt_match[] = {
 	{
 		.compatible = "mediatek,mt2701-ecc",
@@ -493,6 +512,9 @@ static const struct of_device_id mtk_ecc_dt_match[] = {
 	}, {
 		.compatible = "mediatek,mt7622-ecc",
 		.data = &mtk_ecc_caps_mt7622,
+	}, {
+		.compatible = "mediatek,mt7986-ecc",
+		.data = &mtk_ecc_caps_mt7986,
 	},
 	{},
 };
-- 
2.25.1

[RESEND PATCH v5 04/10] dt-bindings: spi: mtk-snfi: Add compatible for MT7986

[Xiangsheng Hou]

Add dt-bindings documentation of SPI NAND controller
for MediaTek MT7986 SoC platform. And add optional
nfi_hclk property which is needed for MT7986.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../bindings/spi/mediatek,spi-mtk-snfi.yaml   | 51 +++++++++++++++----
 1 file changed, 42 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
index 6e6e02c91780..bab23f1b11fd 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
@@ -18,14 +18,12 @@ description: |
   using the accompanying ECC engine. There should be only one spi
   slave device following generic spi bindings.
 
-allOf:
-  - $ref: /schemas/spi/spi-controller.yaml#
-
 properties:
   compatible:
     enum:
       - mediatek,mt7622-snand
       - mediatek,mt7629-snand
+      - mediatek,mt7986-snand
 
   reg:
     items:
@@ -36,14 +34,12 @@ properties:
       - description: NFI interrupt
 
   clocks:
-    items:
-      - description: clock used for the controller
-      - description: clock used for the SPI bus
+    minItems: 2
+    maxItems: 3
 
   clock-names:
-    items:
-      - const: nfi_clk
-      - const: pad_clk
+    minItems: 2
+    maxItems: 3
 
   nand-ecc-engine:
     description: device-tree node of the accompanying ECC engine.
@@ -57,6 +53,43 @@ required:
   - clock-names
   - nand-ecc-engine
 
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt7622-snand
+            - mediatek,mt7629-snand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock used for the controller
+            - description: clock used for the SPI bus
+        clock-names:
+          items:
+            - const: nfi_clk
+            - const: pad_clk
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt7986-snand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock used for the controller
+            - description: clock used for the SPI bus
+            - description: clock used for the AHB bus
+        clock-names:
+          items:
+            - const: nfi_clk
+            - const: pad_clk
+            - const: nfi_hclk
+
 unevaluatedProperties: false
 
 examples:
-- 
2.25.1

[RESEND PATCH v5 05/10] spi: mtk-snfi: Add snfi sample delay and read latency adjustment

[Xiangsheng Hou]

Add snfi sample delay and read latency adjustment which can get
from dts property.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/spi/spi-mtk-snfi.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/spi/spi-mtk-snfi.c b/drivers/spi/spi-mtk-snfi.c
index 85644308df23..f3f95eb37365 100644
--- a/drivers/spi/spi-mtk-snfi.c
+++ b/drivers/spi/spi-mtk-snfi.c
@@ -195,6 +195,8 @@
 #define DATA_READ_MODE_X4 2
 #define DATA_READ_MODE_DUAL 5
 #define DATA_READ_MODE_QUAD 6
+#define DATA_READ_LATCH_LAT GENMASK(9, 8)
+#define DATA_READ_LATCH_LAT_S 8
 #define PG_LOAD_CUSTOM_EN BIT(7)
 #define DATARD_CUSTOM_EN BIT(6)
 #define CS_DESELECT_CYC_S 0
@@ -205,6 +207,9 @@
 
 #define SNF_DLY_CTL3 0x548
 #define SFCK_SAM_DLY_S 0
+#define SFCK_SAM_DLY GENMASK(5, 0)
+#define SFCK_SAM_DLY_TOTAL 9
+#define SFCK_SAM_DLY_RANGE 47
 
 #define SNF_STA_CTL1 0x550
 #define CUS_PG_DONE BIT(28)
@@ -1368,6 +1373,8 @@ static int mtk_snand_probe(struct platform_device *pdev)
 	const struct of_device_id *dev_id;
 	struct spi_controller *ctlr;
 	struct mtk_snand *ms;
+	unsigned long spi_freq;
+	u32 val = 0;
 	int ret;
 
 	dev_id = of_match_node(mtk_snand_ids, np);
@@ -1446,6 +1453,19 @@ static int mtk_snand_probe(struct platform_device *pdev)
 	// switch to SNFI mode
 	nfi_write32(ms, SNF_CFG, SPI_MODE);
 
+	ret = of_property_read_u32(np, "rx-sample-delay-ns", &val);
+	if (!ret)
+		nfi_rmw32(ms, SNF_DLY_CTL3, SFCK_SAM_DLY,
+			  val * SFCK_SAM_DLY_RANGE / SFCK_SAM_DLY_TOTAL);
+
+	ret = of_property_read_u32(np, "mediatek,rx-latch-latency-ns", &val);
+	if (!ret) {
+		spi_freq = clk_get_rate(ms->pad_clk);
+		val = DIV_ROUND_CLOSEST(val, NSEC_PER_SEC / spi_freq);
+		nfi_rmw32(ms, SNF_MISC_CTL, DATA_READ_LATCH_LAT,
+			  val << DATA_READ_LATCH_LAT_S);
+	}
+
 	// setup an initial page format for ops matching page_cache_op template
 	// before ECC is called.
 	ret = mtk_snand_setup_pagefmt(ms, SZ_2K, SZ_64);
-- 
2.25.1

[RESEND PATCH v5 06/10] dt-bindings: spi: mtk-snfi: Add read latch latency property

[Xiangsheng Hou]

Add mediatek,rx-latch-latency-ns property which adjust data read
latch latency in the unit of nanoseconds.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml         | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
index bab23f1b11fd..1e5e89a693c3 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
@@ -45,6 +45,9 @@ properties:
     description: device-tree node of the accompanying ECC engine.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  mediatek,rx-latch-latency-ns:
+    description: Data read latch latency, unit is nanoseconds.
+
 required:
   - compatible
   - reg
-- 
2.25.1

[RESEND PATCH v5 07/10] dt-bindings: mtd: Split ECC engine with rawnand controller

[Xiangsheng Hou]

Split MediaTek ECC engine with rawnand controller and convert to
YAML schema.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/mtd/mediatek,mtk-nfc.yaml        | 155 +++++++++++++++
 .../mtd/mediatek,nand-ecc-engine.yaml         |  62 ++++++
 .../devicetree/bindings/mtd/mtk-nand.txt      | 176 ------------------
 3 files changed, 217 insertions(+), 176 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
 create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt

diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
new file mode 100644
index 000000000000..a6e7f123eda7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mediatek,mtk-nfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek(MTK) SoCs raw NAND FLASH controller (NFC)
+
+maintainers:
+  - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-nfc
+      - mediatek,mt2712-nfc
+      - mediatek,mt7622-nfc
+
+  reg:
+    items:
+      - description: Base physical address and size of NFI.
+
+  interrupts:
+    items:
+      - description: NFI interrupt
+
+  clocks:
+    items:
+      - description: clock used for the controller
+      - description: clock used for the pad
+
+  clock-names:
+    items:
+      - const: nfi_clk
+      - const: pad_clk
+
+  ecc-engine:
+    description: device-tree node of the required ECC engine.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    $ref: nand-chip.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        maximum: 1
+      nand-on-flash-bbt: true
+      nand-ecc-mode:
+        const: hw
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2701-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2712-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60, 68, 72, 80]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              const: 512
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ecc-engine
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        nand-controller@1100d000 {
+            compatible = "mediatek,mt2701-nfc";
+            reg = <0 0x1100d000 0 0x1000>;
+            interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI>,
+                     <&pericfg CLK_PERI_NFI_PAD>;
+            clock-names = "nfi_clk", "pad_clk";
+            ecc-engine = <&bch>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            nand@0 {
+                reg = <0>;
+
+                nand-on-flash-bbt;
+                nand-ecc-mode = "hw";
+                nand-ecc-step-size = <1024>;
+                nand-ecc-strength = <24>;
+
+                partitions {
+                    compatible = "fixed-partitions";
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+
+                    preloader@0 {
+                        label = "pl";
+                        read-only;
+                        reg = <0x0 0x400000>;
+                    };
+                    android@400000 {
+                        label = "android";
+                        reg = <0x400000 0x12c00000>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
new file mode 100644
index 000000000000..b13d801eda76
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mediatek,nand-ecc-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek(MTK) SoCs NAND ECC engine
+
+maintainers:
+  - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+
+description: |
+  MTK NAND ECC engine can cowork with MTK raw NAND and SPI NAND controller.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-ecc
+      - mediatek,mt2712-ecc
+      - mediatek,mt7622-ecc
+
+  reg:
+    items:
+      - description: Base physical address and size of ECC.
+
+  interrupts:
+    items:
+      - description: ECC interrupt
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: nfiecc_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        bch: ecc@1100e000 {
+            compatible = "mediatek,mt2701-ecc";
+            reg = <0 0x1100e000 0 0x1000>;
+            interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI_ECC>;
+            clock-names = "nfiecc_clk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
deleted file mode 100644
index 839ea2f93d04..000000000000
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ /dev/null
@@ -1,176 +0,0 @@
-MTK SoCs NAND FLASH controller (NFC) DT binding
-
-This file documents the device tree bindings for MTK SoCs NAND controllers.
-The functional split of the controller requires two drivers to operate:
-the nand controller interface driver and the ECC engine driver.
-
-The hardware description for both devices must be captured as device
-tree nodes.
-
-1) NFC NAND Controller Interface (NFI):
-=======================================
-
-The first part of NFC is NAND Controller Interface (NFI) HW.
-Required NFI properties:
-- compatible:			Should be one of
-				"mediatek,mt2701-nfc",
-				"mediatek,mt2712-nfc",
-				"mediatek,mt7622-nfc".
-- reg:				Base physical address and size of NFI.
-- interrupts:			Interrupts of NFI.
-- clocks:			NFI required clocks.
-- clock-names:			NFI clocks internal name.
-- ecc-engine:			Required ECC Engine node.
-- #address-cells:		NAND chip index, should be 1.
-- #size-cells:			Should be 0.
-
-Example:
-
-	nandc: nfi@1100d000 {
-		compatible = "mediatek,mt2701-nfc";
-		reg = <0 0x1100d000 0 0x1000>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI>,
-			 <&pericfg CLK_PERI_NFI_PAD>;
-		clock-names = "nfi_clk", "pad_clk";
-		ecc-engine = <&bch>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-        };
-
-Platform related properties, should be set in {platform_name}.dts:
-- children nodes:	NAND chips.
-
-Children nodes properties:
-- reg:			Chip Select Signal, default 0.
-			Set as reg = <0>, <1> when need 2 CS.
-Optional:
-- nand-on-flash-bbt:	Store BBT on NAND Flash.
-- nand-ecc-mode:	the NAND ecc mode (check driver for supported modes)
-- nand-ecc-step-size:	Number of data bytes covered by a single ECC step.
-			valid values:
-			512 and 1024 on mt2701 and mt2712.
-			512 only on mt7622.
-			1024 is recommended for large page NANDs.
-- nand-ecc-strength:	Number of bits to correct per ECC step.
-			The valid values that each controller supports:
-			mt2701: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
-				32, 36, 40, 44, 48, 52, 56, 60.
-			mt2712: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
-				32, 36, 40, 44, 48, 52, 56, 60, 68, 72, 80.
-			mt7622: 4, 6, 8, 10, 12, 14, 16.
-			The strength should be calculated as follows:
-			E = (S - F) * 8 / B
-			S = O / (P / Q)
-				E :	nand-ecc-strength.
-				S :	spare size per sector.
-				F :	FDM size, should be in the range [1,8].
-					It is used to store free oob data.
-				O :	oob size.
-				P :	page size.
-				Q :	nand-ecc-step-size.
-				B :	number of parity bits needed to correct
-					1 bitflip.
-					According to MTK NAND controller design,
-					this number depends on max ecc step size
-					that MTK NAND controller supports.
-					If max ecc step size supported is 1024,
-					then it should be always 14. And if max
-					ecc step size is 512, then it should be
-					always 13.
-			If the result does not match any one of the listed
-			choices above, please select the smaller valid value from
-			the list.
-			(otherwise the driver will do the adjustment at runtime)
-- pinctrl-names:	Default NAND pin GPIO setting name.
-- pinctrl-0:		GPIO setting node.
-
-Example:
-	&pio {
-		nand_pins_default: nanddefault {
-			pins_dat {
-				pinmux = <MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7>,
-					 <MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6>,
-					 <MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4>,
-					 <MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3>,
-					 <MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0>,
-					 <MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1>,
-					 <MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5>,
-					 <MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8>,
-					 <MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2>;
-				input-enable;
-				drive-strength = <MTK_DRIVE_8mA>;
-				bias-pull-up;
-			};
-
-			pins_we {
-				pinmux = <MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB>;
-				drive-strength = <MTK_DRIVE_8mA>;
-				bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
-			};
-
-			pins_ale {
-				pinmux = <MT2701_PIN_116_MSDC0_CMD__FUNC_NALE>;
-				drive-strength = <MTK_DRIVE_8mA>;
-				bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-			};
-		};
-	};
-
-	&nandc {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_pins_default>;
-		nand@0 {
-			reg = <0>;
-			nand-on-flash-bbt;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <24>;
-			nand-ecc-step-size = <1024>;
-		};
-	};
-
-NAND chip optional subnodes:
-- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
-
-Example:
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			preloader@0 {
-				label = "pl";
-				read-only;
-				reg = <0x00000000 0x00400000>;
-			};
-			android@00400000 {
-				label = "android";
-				reg = <0x00400000 0x12c00000>;
-			};
-		};
-	};
-
-2) ECC Engine:
-==============
-
-Required BCH properties:
-- compatible:	Should be one of
-		"mediatek,mt2701-ecc",
-		"mediatek,mt2712-ecc",
-		"mediatek,mt7622-ecc".
-- reg:		Base physical address and size of ECC.
-- interrupts:	Interrupts of ECC.
-- clocks:	ECC required clocks.
-- clock-names:	ECC clocks internal name.
-
-Example:
-
-	bch: ecc@1100e000 {
-		compatible = "mediatek,mt2701-ecc";
-		reg = <0 0x1100e000 0 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI_ECC>;
-		clock-names = "nfiecc_clk";
-	};
-- 
2.25.1

[RESEND PATCH v5 08/10] arm64: dts: mediatek: Fix existing NAND controller node name

[Xiangsheng Hou]

Change the existing node name in order to match NAND controller DT
bindings.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 2 +-
 arch/arm64/boot/dts/mediatek/mt7622.dtsi  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 879dff24dcd3..ed1a9d319415 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -559,7 +559,7 @@ spi0: spi@1100a000 {
 		status = "disabled";
 	};
 
-	nandc: nfi@1100e000 {
+	nandc: nand-controller@1100e000 {
 		compatible = "mediatek,mt2712-nfc";
 		reg = <0 0x1100e000 0 0x1000>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 62487a3c4db1..eb4e4638b548 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -538,7 +538,7 @@ bluetooth {
 		};
 	};
 
-	nandc: nfi@1100d000 {
+	nandc: nand-controller@1100d000 {
 		compatible = "mediatek,mt7622-nfc";
 		reg = <0 0x1100D000 0 0x1000>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
-- 
2.25.1

[RESEND PATCH v5 09/10] arm: dts: mediatek: Fix existing NAND controller node name

[Xiangsheng Hou]

Change the existing node name in order to match NAND controller DT
bindings.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm/boot/dts/mt2701.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 0a0fe8c5a405..ce6a4015fed5 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -359,7 +359,7 @@ thermal: thermal@1100b000 {
 		mediatek,apmixedsys = <&apmixedsys>;
 	};
 
-	nandc: nfi@1100d000 {
+	nandc: nand-controller@1100d000 {
 		compatible = "mediatek,mt2701-nfc";
 		reg = <0 0x1100d000 0 0x1000>;
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
-- 
2.25.1

[RESEND PATCH v5 10/10] dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986

[Xiangsheng Hou]

Add dt-bindings documentation of ECC for MediaTek MT7986 SoC
platform.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml        | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
index b13d801eda76..505baf1e8830 100644
--- a/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
+++ b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
@@ -18,6 +18,7 @@ properties:
       - mediatek,mt2701-ecc
       - mediatek,mt2712-ecc
       - mediatek,mt7622-ecc
+      - mediatek,mt7986-ecc
 
   reg:
     items:
-- 
2.25.1

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Miquel Raynal]

Hi Xiangsheng,

xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:

> This patch series add MediaTek MT7986 SPI NAND and ECC controller
> support, split ECC engine with rawnand controller in bindings and
> change to YAML schema.

I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
tree as they look completely orthogonal with all the other (spi/DT)
changes, am I right?

Mark, is it okay for you?

Thanks,
Miquèl

> 
> Changes since V4:
>  - Split arm and arm64 dts patch for fix existing NAND controller node name.
> 
> Changes since V3:
>  - Correct mediatek,mtk-nfc.yaml dt-bindings.
> 
> Changes since V2:
>  - Change ECC err_mask value with GENMASK macro.
>  - Change snfi mediatek,rx-latch-latency to mediatek,rx-latch-latency-ns.
>  - Add a separate patch for DTS change.
>  - Move common description to top-level pattern properties.
>  - Drop redundant parts in dt-bindings.
> 
> Changes since V1:
>  - Use existing sample delay property.
>  - Add restricting for optional nfi_hclk.
>  - Improve and perfect dt-bindings documentation.
>  - Change existing node name to match NAND controller DT bingings.
>  - Fix issues reported by dt_binding_check.
>  - Fix issues reported by dtbs_check.
> 
> Xiangsheng Hou (10):
>   spi: mtk-snfi: Change default page format to setup default setting
>   spi: mtk-snfi: Add optional nfi_hclk which is needed for MT7986
>   mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
>   dt-bindings: spi: mtk-snfi: Add compatible for MT7986
>   spi: mtk-snfi: Add snfi sample delay and read latency adjustment
>   dt-bindings: spi: mtk-snfi: Add read latch latency property
>   dt-bindings: mtd: Split ECC engine with rawnand controller
>   arm64: dts: mediatek: Fix existing NAND controller node name
>   arm: dts: mediatek: Fix existing NAND controller node name
>   dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986
> 
>  .../bindings/mtd/mediatek,mtk-nfc.yaml        | 155 +++++++++++++++
>  .../mtd/mediatek,nand-ecc-engine.yaml         |  63 +++++++
>  .../devicetree/bindings/mtd/mtk-nand.txt      | 176 ------------------
>  .../bindings/spi/mediatek,spi-mtk-snfi.yaml   |  54 +++++-
>  arch/arm/boot/dts/mt2701.dtsi                 |   2 +-
>  arch/arm64/boot/dts/mediatek/mt2712e.dtsi     |   2 +-
>  arch/arm64/boot/dts/mediatek/mt7622.dtsi      |   2 +-
>  drivers/mtd/nand/ecc-mtk.c                    |  28 ++-
>  drivers/spi/spi-mtk-snfi.c                    |  41 +++-
>  9 files changed, 330 insertions(+), 193 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
>  create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt
> 

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Miquel Raynal]

Hi Xiangsheng,

xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:

> This patch series add MediaTek MT7986 SPI NAND and ECC controller
> support, split ECC engine with rawnand controller in bindings and
> change to YAML schema.

I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
tree as they look completely orthogonal with all the other (spi/DT)
changes, am I right?

Mark, is it okay for you?

Thanks,
Miquèl

> 
> Changes since V4:
>  - Split arm and arm64 dts patch for fix existing NAND controller node name.
> 
> Changes since V3:
>  - Correct mediatek,mtk-nfc.yaml dt-bindings.
> 
> Changes since V2:
>  - Change ECC err_mask value with GENMASK macro.
>  - Change snfi mediatek,rx-latch-latency to mediatek,rx-latch-latency-ns.
>  - Add a separate patch for DTS change.
>  - Move common description to top-level pattern properties.
>  - Drop redundant parts in dt-bindings.
> 
> Changes since V1:
>  - Use existing sample delay property.
>  - Add restricting for optional nfi_hclk.
>  - Improve and perfect dt-bindings documentation.
>  - Change existing node name to match NAND controller DT bingings.
>  - Fix issues reported by dt_binding_check.
>  - Fix issues reported by dtbs_check.
> 
> Xiangsheng Hou (10):
>   spi: mtk-snfi: Change default page format to setup default setting
>   spi: mtk-snfi: Add optional nfi_hclk which is needed for MT7986
>   mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
>   dt-bindings: spi: mtk-snfi: Add compatible for MT7986
>   spi: mtk-snfi: Add snfi sample delay and read latency adjustment
>   dt-bindings: spi: mtk-snfi: Add read latch latency property
>   dt-bindings: mtd: Split ECC engine with rawnand controller
>   arm64: dts: mediatek: Fix existing NAND controller node name
>   arm: dts: mediatek: Fix existing NAND controller node name
>   dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986
> 
>  .../bindings/mtd/mediatek,mtk-nfc.yaml        | 155 +++++++++++++++
>  .../mtd/mediatek,nand-ecc-engine.yaml         |  63 +++++++
>  .../devicetree/bindings/mtd/mtk-nand.txt      | 176 ------------------
>  .../bindings/spi/mediatek,spi-mtk-snfi.yaml   |  54 +++++-
>  arch/arm/boot/dts/mt2701.dtsi                 |   2 +-
>  arch/arm64/boot/dts/mediatek/mt2712e.dtsi     |   2 +-
>  arch/arm64/boot/dts/mediatek/mt7622.dtsi      |   2 +-
>  drivers/mtd/nand/ecc-mtk.c                    |  28 ++-
>  drivers/spi/spi-mtk-snfi.c                    |  41 +++-
>  9 files changed, 330 insertions(+), 193 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
>  create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Miquel Raynal]

Hi Xiangsheng,

xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:

> This patch series add MediaTek MT7986 SPI NAND and ECC controller
> support, split ECC engine with rawnand controller in bindings and
> change to YAML schema.

I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
tree as they look completely orthogonal with all the other (spi/DT)
changes, am I right?

Mark, is it okay for you?

Thanks,
Miquèl

> 
> Changes since V4:
>  - Split arm and arm64 dts patch for fix existing NAND controller node name.
> 
> Changes since V3:
>  - Correct mediatek,mtk-nfc.yaml dt-bindings.
> 
> Changes since V2:
>  - Change ECC err_mask value with GENMASK macro.
>  - Change snfi mediatek,rx-latch-latency to mediatek,rx-latch-latency-ns.
>  - Add a separate patch for DTS change.
>  - Move common description to top-level pattern properties.
>  - Drop redundant parts in dt-bindings.
> 
> Changes since V1:
>  - Use existing sample delay property.
>  - Add restricting for optional nfi_hclk.
>  - Improve and perfect dt-bindings documentation.
>  - Change existing node name to match NAND controller DT bingings.
>  - Fix issues reported by dt_binding_check.
>  - Fix issues reported by dtbs_check.
> 
> Xiangsheng Hou (10):
>   spi: mtk-snfi: Change default page format to setup default setting
>   spi: mtk-snfi: Add optional nfi_hclk which is needed for MT7986
>   mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
>   dt-bindings: spi: mtk-snfi: Add compatible for MT7986
>   spi: mtk-snfi: Add snfi sample delay and read latency adjustment
>   dt-bindings: spi: mtk-snfi: Add read latch latency property
>   dt-bindings: mtd: Split ECC engine with rawnand controller
>   arm64: dts: mediatek: Fix existing NAND controller node name
>   arm: dts: mediatek: Fix existing NAND controller node name
>   dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986
> 
>  .../bindings/mtd/mediatek,mtk-nfc.yaml        | 155 +++++++++++++++
>  .../mtd/mediatek,nand-ecc-engine.yaml         |  63 +++++++
>  .../devicetree/bindings/mtd/mtk-nand.txt      | 176 ------------------
>  .../bindings/spi/mediatek,spi-mtk-snfi.yaml   |  54 +++++-
>  arch/arm/boot/dts/mt2701.dtsi                 |   2 +-
>  arch/arm64/boot/dts/mediatek/mt2712e.dtsi     |   2 +-
>  arch/arm64/boot/dts/mediatek/mt7622.dtsi      |   2 +-
>  drivers/mtd/nand/ecc-mtk.c                    |  28 ++-
>  drivers/spi/spi-mtk-snfi.c                    |  41 +++-
>  9 files changed, 330 insertions(+), 193 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
>  create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 718 bytes --]

On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:

> > This patch series add MediaTek MT7986 SPI NAND and ECC controller
> > support, split ECC engine with rawnand controller in bindings and
> > change to YAML schema.

> I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
> tree as they look completely orthogonal with all the other (spi/DT)
> changes, am I right?

> Mark, is it okay for you?

That's fine, assuming there's no dependency issues.  Xiangsheng, it's
generally best to avoid mixing patches for multiple subsystems into a
single series when it's not needed since it makes merging things more
complex.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 718 bytes --]

On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:

> > This patch series add MediaTek MT7986 SPI NAND and ECC controller
> > support, split ECC engine with rawnand controller in bindings and
> > change to YAML schema.

> I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
> tree as they look completely orthogonal with all the other (spi/DT)
> changes, am I right?

> Mark, is it okay for you?

That's fine, assuming there's no dependency issues.  Xiangsheng, it's
generally best to avoid mixing patches for multiple subsystems into a
single series when it's not needed since it makes merging things more
complex.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 718 bytes --]

On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:

> > This patch series add MediaTek MT7986 SPI NAND and ECC controller
> > support, split ECC engine with rawnand controller in bindings and
> > change to YAML schema.

> I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
> tree as they look completely orthogonal with all the other (spi/DT)
> changes, am I right?

> Mark, is it okay for you?

That's fine, assuming there's no dependency issues.  Xiangsheng, it's
generally best to avoid mixing patches for multiple subsystems into a
single series when it's not needed since it makes merging things more
complex.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [RESEND PATCH v5 07/10] dt-bindings: mtd: Split ECC engine with rawnand controller

[kernel test robot]

Hi Xiangsheng,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on broonie-spi/for-next]
[also build test WARNING on robh/for-next mtd/mtd/next mtd/mtd/fixes linus/master v6.2-rc6 next-20230130]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Xiangsheng-Hou/spi-mtk-snfi-Change-default-page-format-to-setup-default-setting/20230130-111021
base:   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
patch link:    https://lore.kernel.org/r/20230130030656.12127-8-xiangsheng.hou%40mediatek.com
patch subject: [RESEND PATCH v5 07/10] dt-bindings: mtd: Split ECC engine with rawnand controller
reproduce:
        # https://github.com/intel-lab-lkp/linux/commit/f3a5f8d573b8be1d7a10224f0e10a699d9a0ea09
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Xiangsheng-Hou/spi-mtk-snfi-Change-default-page-format-to-setup-default-setting/20230130-111021
        git checkout f3a5f8d573b8be1d7a10224f0e10a699d9a0ea09
        make menuconfig
        # enable CONFIG_COMPILE_TEST, CONFIG_WARN_MISSING_DOCUMENTS, CONFIG_WARN_ABI_ERRORS
        make htmldocs

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/mtd/mtk-nand.txt

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

Re: [RESEND PATCH v5 07/10] dt-bindings: mtd: Split ECC engine with rawnand controller

[kernel test robot]

Hi Xiangsheng,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on broonie-spi/for-next]
[also build test WARNING on robh/for-next mtd/mtd/next mtd/mtd/fixes linus/master v6.2-rc6 next-20230130]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Xiangsheng-Hou/spi-mtk-snfi-Change-default-page-format-to-setup-default-setting/20230130-111021
base:   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
patch link:    https://lore.kernel.org/r/20230130030656.12127-8-xiangsheng.hou%40mediatek.com
patch subject: [RESEND PATCH v5 07/10] dt-bindings: mtd: Split ECC engine with rawnand controller
reproduce:
        # https://github.com/intel-lab-lkp/linux/commit/f3a5f8d573b8be1d7a10224f0e10a699d9a0ea09
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Xiangsheng-Hou/spi-mtk-snfi-Change-default-page-format-to-setup-default-setting/20230130-111021
        git checkout f3a5f8d573b8be1d7a10224f0e10a699d9a0ea09
        make menuconfig
        # enable CONFIG_COMPILE_TEST, CONFIG_WARN_MISSING_DOCUMENTS, CONFIG_WARN_ABI_ERRORS
        make htmldocs

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/mtd/mtk-nand.txt

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [RESEND PATCH v5 07/10] dt-bindings: mtd: Split ECC engine with rawnand controller

[kernel test robot]

Hi Xiangsheng,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on broonie-spi/for-next]
[also build test WARNING on robh/for-next mtd/mtd/next mtd/mtd/fixes linus/master v6.2-rc6 next-20230130]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Xiangsheng-Hou/spi-mtk-snfi-Change-default-page-format-to-setup-default-setting/20230130-111021
base:   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
patch link:    https://lore.kernel.org/r/20230130030656.12127-8-xiangsheng.hou%40mediatek.com
patch subject: [RESEND PATCH v5 07/10] dt-bindings: mtd: Split ECC engine with rawnand controller
reproduce:
        # https://github.com/intel-lab-lkp/linux/commit/f3a5f8d573b8be1d7a10224f0e10a699d9a0ea09
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Xiangsheng-Hou/spi-mtk-snfi-Change-default-page-format-to-setup-default-setting/20230130-111021
        git checkout f3a5f8d573b8be1d7a10224f0e10a699d9a0ea09
        make menuconfig
        # enable CONFIG_COMPILE_TEST, CONFIG_WARN_MISSING_DOCUMENTS, CONFIG_WARN_ABI_ERRORS
        make htmldocs

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/mtd/mtk-nand.txt

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Miquel Raynal]

Hi Xiangsheng,

broonie@kernel.org wrote on Mon, 30 Jan 2023 16:18:56 +0000:

> On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> > xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:  
> 
> > > This patch series add MediaTek MT7986 SPI NAND and ECC controller
> > > support, split ECC engine with rawnand controller in bindings and
> > > change to YAML schema.  
> 
> > I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
> > tree as they look completely orthogonal with all the other (spi/DT)
> > changes, am I right?  
> 
> > Mark, is it okay for you?  
> 
> That's fine, assuming there's no dependency issues.  Xiangsheng, it's
> generally best to avoid mixing patches for multiple subsystems into a
> single series when it's not needed since it makes merging things more
> complex.

Well, kernel test robot just reported an issue with a wrong file name,
so let's split the series. I now expect a series with the spi and
relevant changes (for Mark) and another series with the three mtd
patches -fixed, of course- which I'll apply on my side.

Thanks, Miquèl

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Miquel Raynal]

Hi Xiangsheng,

broonie@kernel.org wrote on Mon, 30 Jan 2023 16:18:56 +0000:

> On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> > xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:  
> 
> > > This patch series add MediaTek MT7986 SPI NAND and ECC controller
> > > support, split ECC engine with rawnand controller in bindings and
> > > change to YAML schema.  
> 
> > I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
> > tree as they look completely orthogonal with all the other (spi/DT)
> > changes, am I right?  
> 
> > Mark, is it okay for you?  
> 
> That's fine, assuming there's no dependency issues.  Xiangsheng, it's
> generally best to avoid mixing patches for multiple subsystems into a
> single series when it's not needed since it makes merging things more
> complex.

Well, kernel test robot just reported an issue with a wrong file name,
so let's split the series. I now expect a series with the spi and
relevant changes (for Mark) and another series with the three mtd
patches -fixed, of course- which I'll apply on my side.

Thanks, Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Miquel Raynal]

Hi Xiangsheng,

broonie@kernel.org wrote on Mon, 30 Jan 2023 16:18:56 +0000:

> On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> > xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46 +0800:  
> 
> > > This patch series add MediaTek MT7986 SPI NAND and ECC controller
> > > support, split ECC engine with rawnand controller in bindings and
> > > change to YAML schema.  
> 
> > I would like to pick-up patches 3, 7 and 10 and apply them in the mtd
> > tree as they look completely orthogonal with all the other (spi/DT)
> > changes, am I right?  
> 
> > Mark, is it okay for you?  
> 
> That's fine, assuming there's no dependency issues.  Xiangsheng, it's
> generally best to avoid mixing patches for multiple subsystems into a
> single series when it's not needed since it makes merging things more
> complex.

Well, kernel test robot just reported an issue with a wrong file name,
so let's split the series. I now expect a series with the spi and
relevant changes (for Mark) and another series with the three mtd
patches -fixed, of course- which I'll apply on my side.

Thanks, Miquèl

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Xiangsheng Hou (侯祥胜)]

Hi Miquel,

On Mon, 2023-01-30 at 17:33 +0100, Miquel Raynal wrote:
> Hi Xiangsheng,
> 
> broonie@kernel.org wrote on Mon, 30 Jan 2023 16:18:56 +0000:
> 
> > On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> > > xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46
> > > +0800:  
> > > > This patch series add MediaTek MT7986 SPI NAND and ECC
> > > > controller
> > > > support, split ECC engine with rawnand controller in bindings
> > > > and
> > > > change to YAML schema.  
> > > I would like to pick-up patches 3, 7 and 10 and apply them in the
> > > mtd
> > > tree as they look completely orthogonal with all the other
> > > (spi/DT)
> > > changes, am I right?  
> > > Mark, is it okay for you?  
> > 
> > That's fine, assuming there's no dependency issues.  Xiangsheng,
> > it's
> > generally best to avoid mixing patches for multiple subsystems into
> > a
> > single series when it's not needed since it makes merging things
> > more
> > complex.
> 
> Well, kernel test robot just reported an issue with a wrong file
> name,
> so let's split the series. I now expect a series with the spi and
> relevant changes (for Mark) and another series with the three mtd
> patches -fixed, of course- which I'll apply on my side.

I will pick-up patches 3, 7, 10 and 8, 9 as a series for you, since
patches 8, 9 change the existing NAND controller node name. And another
patches as a series for Mark.

Thanks
Xiangsheng Hou

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Xiangsheng Hou (侯祥胜)]

Hi Miquel,

On Mon, 2023-01-30 at 17:33 +0100, Miquel Raynal wrote:
> Hi Xiangsheng,
> 
> broonie@kernel.org wrote on Mon, 30 Jan 2023 16:18:56 +0000:
> 
> > On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> > > xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46
> > > +0800:  
> > > > This patch series add MediaTek MT7986 SPI NAND and ECC
> > > > controller
> > > > support, split ECC engine with rawnand controller in bindings
> > > > and
> > > > change to YAML schema.  
> > > I would like to pick-up patches 3, 7 and 10 and apply them in the
> > > mtd
> > > tree as they look completely orthogonal with all the other
> > > (spi/DT)
> > > changes, am I right?  
> > > Mark, is it okay for you?  
> > 
> > That's fine, assuming there's no dependency issues.  Xiangsheng,
> > it's
> > generally best to avoid mixing patches for multiple subsystems into
> > a
> > single series when it's not needed since it makes merging things
> > more
> > complex.
> 
> Well, kernel test robot just reported an issue with a wrong file
> name,
> so let's split the series. I now expect a series with the spi and
> relevant changes (for Mark) and another series with the three mtd
> patches -fixed, of course- which I'll apply on my side.

I will pick-up patches 3, 7, 10 and 8, 9 as a series for you, since
patches 8, 9 change the existing NAND controller node name. And another
patches as a series for Mark.

Thanks
Xiangsheng Hou


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [RESEND PATCH v5 00/10] Add MediaTek MT7986 SPI NAND and ECC support

[Xiangsheng Hou (侯祥胜)]

Hi Miquel,

On Mon, 2023-01-30 at 17:33 +0100, Miquel Raynal wrote:
> Hi Xiangsheng,
> 
> broonie@kernel.org wrote on Mon, 30 Jan 2023 16:18:56 +0000:
> 
> > On Mon, Jan 30, 2023 at 05:11:45PM +0100, Miquel Raynal wrote:
> > > xiangsheng.hou@mediatek.com wrote on Mon, 30 Jan 2023 11:06:46
> > > +0800:  
> > > > This patch series add MediaTek MT7986 SPI NAND and ECC
> > > > controller
> > > > support, split ECC engine with rawnand controller in bindings
> > > > and
> > > > change to YAML schema.  
> > > I would like to pick-up patches 3, 7 and 10 and apply them in the
> > > mtd
> > > tree as they look completely orthogonal with all the other
> > > (spi/DT)
> > > changes, am I right?  
> > > Mark, is it okay for you?  
> > 
> > That's fine, assuming there's no dependency issues.  Xiangsheng,
> > it's
> > generally best to avoid mixing patches for multiple subsystems into
> > a
> > single series when it's not needed since it makes merging things
> > more
> > complex.
> 
> Well, kernel test robot just reported an issue with a wrong file
> name,
> so let's split the series. I now expect a series with the spi and
> relevant changes (for Mark) and another series with the three mtd
> patches -fixed, of course- which I'll apply on my side.

I will pick-up patches 3, 7, 10 and 8, 9 as a series for you, since
patches 8, 9 change the existing NAND controller node name. And another
patches as a series for Mark.

Thanks
Xiangsheng Hou


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel