All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mengyuan Lou <mengyuanlou@net-swift.com>
To: netdev@vger.kernel.org
Cc: jiawenwu@trustnetic.com
Subject: [PATCH net-next v2 06/10] net: txgbe: Setup Rx and Tx ring
Date: Tue, 31 Jan 2023 18:05:37 +0800	[thread overview]
Message-ID: <20230131100541.73757-7-mengyuanlou@net-swift.com> (raw)
In-Reply-To: <20230131100541.73757-1-mengyuanlou@net-swift.com>

From: Jiawen Wu <jiawenwu@trustnetic.com>

Improve the configuration of Rx and Tx ring, set Rx flags and implement
ndo_set_rx_mode ops.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 drivers/net/ethernet/wangxun/libwx/wx_type.h  |  1 +
 .../net/ethernet/wangxun/txgbe/txgbe_main.c   | 43 +++++++++++++++++--
 .../net/ethernet/wangxun/txgbe/txgbe_type.h   |  3 ++
 3 files changed, 44 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h
index 1863c6cbc6c6..7b247af0ff17 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_type.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h
@@ -200,6 +200,7 @@
 #define WX_MAC_TX_CFG                0x11000
 #define WX_MAC_TX_CFG_TE             BIT(0)
 #define WX_MAC_TX_CFG_SPEED_MASK     GENMASK(30, 29)
+#define WX_MAC_TX_CFG_SPEED_10G      FIELD_PREP(WX_MAC_TX_CFG_SPEED_MASK, 0)
 #define WX_MAC_TX_CFG_SPEED_1G       FIELD_PREP(WX_MAC_TX_CFG_SPEED_MASK, 3)
 #define WX_MAC_RX_CFG                0x11004
 #define WX_MAC_RX_CFG_RE             BIT(0)
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
index 48cca2fb54c7..3b50acb09699 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
@@ -218,6 +218,8 @@ static int txgbe_request_irq(struct wx *wx)
 
 static void txgbe_up_complete(struct wx *wx)
 {
+	u32 reg;
+
 	wx_control_hw(wx, true);
 	wx_configure_vectors(wx);
 
@@ -225,6 +227,15 @@ static void txgbe_up_complete(struct wx *wx)
 	rd32(wx, WX_PX_IC);
 	rd32(wx, WX_PX_MISC_IC);
 	txgbe_irq_enable(wx, true);
+
+	/* Configure MAC Rx and Tx when link is up */
+	reg = rd32(wx, WX_MAC_RX_CFG);
+	wr32(wx, WX_MAC_RX_CFG, reg);
+	wr32(wx, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR);
+	reg = rd32(wx, WX_MAC_WDG_TIMEOUT);
+	wr32(wx, WX_MAC_WDG_TIMEOUT, reg);
+	reg = rd32(wx, WX_MAC_TX_CFG);
+	wr32(wx, WX_MAC_TX_CFG, (reg & ~WX_MAC_TX_CFG_SPEED_MASK) | WX_MAC_TX_CFG_SPEED_10G);
 }
 
 static void txgbe_reset(struct wx *wx)
@@ -246,11 +257,17 @@ static void txgbe_reset(struct wx *wx)
 static void txgbe_disable_device(struct wx *wx)
 {
 	struct net_device *netdev = wx->netdev;
+	u32 i;
 
 	wx_disable_pcie_master(wx);
 	/* disable receives */
 	wx_disable_rx(wx);
 
+	/* disable all enabled rx queues */
+	for (i = 0; i < wx->num_rx_queues; i++)
+		/* this call also flushes the previous write */
+		wx_disable_rx_queue(wx, wx->rx_ring[i]);
+
 	netif_carrier_off(netdev);
 	netif_tx_disable(netdev);
 
@@ -268,6 +285,13 @@ static void txgbe_disable_device(struct wx *wx)
 		wr32m(wx, WX_MAC_TX_CFG, WX_MAC_TX_CFG_TE, 0);
 	}
 
+	/* disable transmits in the hardware now that interrupts are off */
+	for (i = 0; i < wx->num_tx_queues; i++) {
+		u8 reg_idx = wx->tx_ring[i]->reg_idx;
+
+		wr32(wx, WX_PX_TR_CFG(reg_idx), WX_PX_TR_CFG_SWFLSH);
+	}
+
 	/* Disable the Tx DMA engine */
 	wr32m(wx, WX_TDM_CTL, WX_TDM_CTL_TE, 0);
 }
@@ -291,6 +315,8 @@ static int txgbe_sw_init(struct wx *wx)
 	wx->mac.max_tx_queues = TXGBE_SP_MAX_TX_QUEUES;
 	wx->mac.max_rx_queues = TXGBE_SP_MAX_RX_QUEUES;
 	wx->mac.mcft_size = TXGBE_SP_MC_TBL_SIZE;
+	wx->mac.rx_pb_size = TXGBE_SP_RX_PB_SIZE;
+	wx->mac.tx_pb_size = TXGBE_SP_TDB_PB_SZ;
 
 	/* PCI config space info */
 	err = wx_sw_init(wx);
@@ -345,7 +371,7 @@ static int txgbe_open(struct net_device *netdev)
 	struct wx *wx = netdev_priv(netdev);
 	int err;
 
-	err = wx_setup_isb_resources(wx);
+	err = wx_setup_resources(wx);
 	if (err)
 		goto err_reset;
 
@@ -379,7 +405,7 @@ static void txgbe_close_suspend(struct wx *wx)
 	txgbe_disable_device(wx);
 
 	wx_free_irq(wx);
-	wx_free_isb_resources(wx);
+	wx_free_resources(wx);
 }
 
 /**
@@ -399,7 +425,7 @@ static int txgbe_close(struct net_device *netdev)
 
 	txgbe_down(wx);
 	wx_free_irq(wx);
-	wx_free_isb_resources(wx);
+	wx_free_resources(wx);
 	wx_control_hw(wx, false);
 
 	return 0;
@@ -445,6 +471,7 @@ static const struct net_device_ops txgbe_netdev_ops = {
 	.ndo_open               = txgbe_open,
 	.ndo_stop               = txgbe_close,
 	.ndo_start_xmit         = txgbe_xmit_frame,
+	.ndo_set_rx_mode        = wx_set_rx_mode,
 	.ndo_validate_addr      = eth_validate_addr,
 	.ndo_set_mac_address    = wx_set_mac,
 };
@@ -549,6 +576,16 @@ static int txgbe_probe(struct pci_dev *pdev,
 	}
 
 	netdev->features |= NETIF_F_HIGHDMA;
+	netdev->features = NETIF_F_SG;
+
+	/* copy netdev features into list of user selectable features */
+	netdev->hw_features |= netdev->features | NETIF_F_RXALL;
+
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+	netdev->priv_flags |= IFF_SUPP_NOFCS;
+
+	netdev->min_mtu = ETH_MIN_MTU;
+	netdev->max_mtu = TXGBE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN);
 
 	/* make sure the EEPROM is good */
 	err = txgbe_validate_eeprom_checksum(wx, NULL);
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
index ec28cf60c91d..563ea51deca6 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
@@ -77,6 +77,9 @@
 #define TXGBE_SP_MAX_RX_QUEUES  128
 #define TXGBE_SP_RAR_ENTRIES    128
 #define TXGBE_SP_MC_TBL_SIZE    128
+#define TXGBE_SP_RX_PB_SIZE     512
+#define TXGBE_SP_TDB_PB_SZ      (160 * 1024) /* 160KB Packet Buffer */
+#define TXGBE_MAX_JUMBO_FRAME_SIZE      9432 /* max payload 9414 */
 
 /* TX/RX descriptor defines */
 #define TXGBE_DEFAULT_TXD               512
-- 
2.39.1


  parent reply	other threads:[~2023-01-31 10:07 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-31 10:05 [PATCH net-next v2 00/10] Wangxun interrupt and RxTx support Mengyuan Lou
2023-01-31 10:05 ` [PATCH net-next v2 01/10] net: libwx: Add irq flow functions Mengyuan Lou
2023-02-02  5:39   ` Jakub Kicinski
2023-02-02  5:45   ` Jakub Kicinski
2023-01-31 10:05 ` [PATCH net-next v2 02/10] net: ngbe: Add irqs request flow Mengyuan Lou
2023-01-31 10:05 ` [PATCH net-next v2 03/10] net: txgbe: Add interrupt support Mengyuan Lou
2023-01-31 10:05 ` [PATCH net-next v2 04/10] net: libwx: Configure Rx and Tx unit on hardware Mengyuan Lou
2023-01-31 10:05 ` [PATCH net-next v2 05/10] net: libwx: Allocate Rx and Tx resources Mengyuan Lou
2023-02-02  5:51   ` Jakub Kicinski
2023-02-02 14:32     ` mengyuanlou
2023-01-31 10:05 ` Mengyuan Lou [this message]
2023-01-31 10:05 ` [PATCH net-next v2 07/10] net: libwx: Support to receive packets in NAPI Mengyuan Lou
2023-01-31 10:05 ` [PATCH net-next v2 08/10] net: libwx: Add tx path to process packets Mengyuan Lou
2023-01-31 10:05 ` [PATCH net-next v2 09/10] net: txgbe: Support Rx and Tx process path Mengyuan Lou
2023-01-31 10:05 ` [PATCH net-next v2 10/10] net: ngbe: " Mengyuan Lou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230131100541.73757-7-mengyuanlou@net-swift.com \
    --to=mengyuanlou@net-swift.com \
    --cc=jiawenwu@trustnetic.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.