* [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC
2023-02-05 22:59 [PATCH 00/11] man2/: punctuate long numeric strings with digit separators Brian Inglis
@ 2023-02-05 22:59 ` Brian Inglis
2023-02-05 23:31 ` Alejandro Colomar
2023-02-06 0:05 ` Alejandro Colomar
2023-02-05 22:59 ` [PATCH 02/11] man2/spu_run.2: fix example comment status code or-ed value Brian Inglis
` (2 subsequent siblings)
3 siblings, 2 replies; 12+ messages in thread
From: Brian Inglis @ 2023-02-05 22:59 UTC (permalink / raw)
To: Linux Man-Pages; +Cc: Alejandro Colomar
[-- Attachment #1: Type: text/plain, Size: 74 bytes --]
---
man2/shmget.2 | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-man2-shmget.2-fix-limit-units-suffix-from-SI-to-IEC.patch --]
[-- Type: text/x-patch; name="0001-man2-shmget.2-fix-limit-units-suffix-from-SI-to-IEC.patch", Size: 496 bytes --]
diff --git a/man2/shmget.2 b/man2/shmget.2
index cdb2d3bee4b5..4bc18bedf3a9 100644
--- a/man2/shmget.2
+++ b/man2/shmget.2
@@ -354,7 +354,7 @@ for a discussion of why this default value (rather than
is used.
.IP
From Linux 2.2 up to Linux 3.15, the default value of
-this limit was 0x2000000 (32\ MB).
+this limit was 0x2000000 (32\ MiB).
.IP
Because it is not possible to map just part of a shared memory segment,
the amount of virtual memory places another limit on the maximum size of a
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC
2023-02-05 22:59 ` [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC Brian Inglis
@ 2023-02-05 23:31 ` Alejandro Colomar
2023-02-06 0:02 ` Alejandro Colomar
2023-02-06 0:05 ` Alejandro Colomar
1 sibling, 1 reply; 12+ messages in thread
From: Alejandro Colomar @ 2023-02-05 23:31 UTC (permalink / raw)
To: Brian Inglis, Linux Man-Pages
[-- Attachment #1.1: Type: text/plain, Size: 428 bytes --]
On 2/5/23 23:59, Brian Inglis wrote:
> ---
> man2/shmget.2 | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Hi Brian,
Could you please send the patches inline?
If you fear that your mailer might break them, send them _also_ attached, but
please send them inline in the email.
Cheers,
Alex
>
--
<http://www.alejandro-colomar.es/>
GPG key fingerprint: A9348594CE31283A826FBDD8D57633D441E25BB5
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC
2023-02-05 23:31 ` Alejandro Colomar
@ 2023-02-06 0:02 ` Alejandro Colomar
2023-02-06 4:46 ` Brian Inglis
0 siblings, 1 reply; 12+ messages in thread
From: Alejandro Colomar @ 2023-02-06 0:02 UTC (permalink / raw)
To: Brian Inglis, Linux Man-Pages
[-- Attachment #1.1: Type: text/plain, Size: 441 bytes --]
On 2/6/23 00:31, Alejandro Colomar wrote:> Could you please send the patches inline?
> If you fear that your mailer might break them, send them _also_ attached, but
> please send them inline in the email.
Also, please send git patches, with a commit message, which can be produced with
git-format-patch(1).
Cheers,
Alex
--
<http://www.alejandro-colomar.es/>
GPG key fingerprint: A9348594CE31283A826FBDD8D57633D441E25BB5
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC
2023-02-06 0:02 ` Alejandro Colomar
@ 2023-02-06 4:46 ` Brian Inglis
2023-02-06 10:47 ` Alejandro Colomar
0 siblings, 1 reply; 12+ messages in thread
From: Brian Inglis @ 2023-02-06 4:46 UTC (permalink / raw)
To: Linux Man-Pages; +Cc: Alejandro Colomar
On 2023-02-05 17:02, Alejandro Colomar wrote:
> On 2/6/23 00:31, Alejandro Colomar wrote:
> Could you please send the patches inline?
>> If you fear that your mailer might break them, send them _also_ attached, but
>> please send them inline in the email.
> Also, please send git patches, with a commit message, which can be produced with
> git-format-patch(1).
I did my usual:
$ sed -i -e '
s!^...$!...!
...
'
$ ...
$ git commit -m 'man2/...' man2/...
# 11 commits: 9 individual 8 files, 1 interval notation 6 files, 1 rest 33 files
$ git format-patch ... -11
$ git send-email ... 00??-...
Saw no need for longer multi-line commit messages as each was pretty specific.
Please say if you prefer a different patch format or convention.
Do you expect some other email client than git to be used to send email, or do
you just want all the patch diffs in a single email body or what?
Some patches may be delayed or disjoint as my ISP email is aggressively filtered
by an outsourced "provider" that does not like patch series in or out and fails
with no status code: "<from...> server temporarily unavailable. AUP#MXRT"!
--
Take care. Thanks, Brian Inglis Calgary, Alberta, Canada
La perfection est atteinte Perfection is achieved
non pas lorsqu'il n'y a plus rien à ajouter not when there is no more to add
mais lorsqu'il n'y a plus rien à retirer but when there is no more to cut
-- Antoine de Saint-Exupéry
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC
2023-02-06 4:46 ` Brian Inglis
@ 2023-02-06 10:47 ` Alejandro Colomar
0 siblings, 0 replies; 12+ messages in thread
From: Alejandro Colomar @ 2023-02-06 10:47 UTC (permalink / raw)
To: Linux Man-Pages
[-- Attachment #1.1: Type: text/plain, Size: 1745 bytes --]
Hi Brian,
On 2/6/23 05:46, Brian Inglis wrote:
> On 2023-02-05 17:02, Alejandro Colomar wrote:
>> On 2/6/23 00:31, Alejandro Colomar wrote:
>> Could you please send the patches inline?
>
>>> If you fear that your mailer might break them, send them _also_ attached, but
>>> please send them inline in the email.
>
>> Also, please send git patches, with a commit message, which can be produced
>> with git-format-patch(1).
>
> I did my usual:
> $ sed -i -e '
> s!^...$!...!
> ...
> '
> $ ...
> $ git commit -m 'man2/...' man2/...
> # 11 commits: 9 individual 8 files, 1 interval notation 6 files, 1 rest 33 files
> $ git format-patch ... -11
> $ git send-email ... 00??-...
Hmm, I thought you had sent it with something else, since I had never seen
git-format-patch create such an email, but in fact it can. I guess you use
--attach=... or have it configured in your git config. Could you please create
the patch with git format-patch --no-attach ... ?
>
> Saw no need for longer multi-line commit messages as each was pretty specific.
> Please say if you prefer a different patch format or convention.
>
> Do you expect some other email client than git to be used to send email, or do
> you just want all the patch diffs in a single email body or what?
No, in fact I expect git with default settings :)
>
> Some patches may be delayed or disjoint as my ISP email is aggressively filtered
> by an outsourced "provider" that does not like patch series in or out and fails
> with no status code: "<from...> server temporarily unavailable. AUP#MXRT"!
Cheers,
Alex
--
<http://www.alejandro-colomar.es/>
GPG key fingerprint: A9348594CE31283A826FBDD8D57633D441E25BB5
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC
2023-02-05 22:59 ` [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC Brian Inglis
2023-02-05 23:31 ` Alejandro Colomar
@ 2023-02-06 0:05 ` Alejandro Colomar
1 sibling, 0 replies; 12+ messages in thread
From: Alejandro Colomar @ 2023-02-06 0:05 UTC (permalink / raw)
To: Brian Inglis, Linux Man-Pages
[-- Attachment #1.1: Type: text/plain, Size: 393 bytes --]
Hi Brian,
On 2/5/23 23:59, Brian Inglis wrote:
> ---
> man2/shmget.2 | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
The SI also specifies MiB. See units(7) and
⟨https://www.bipm.org/documents/20126/41483022/SI‐Brochure‐9.pdf⟩.
Cheers,
Alex
>
--
<http://www.alejandro-colomar.es/>
GPG key fingerprint: A9348594CE31283A826FBDD8D57633D441E25BB5
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 02/11] man2/spu_run.2: fix example comment status code or-ed value
2023-02-05 22:59 [PATCH 00/11] man2/: punctuate long numeric strings with digit separators Brian Inglis
2023-02-05 22:59 ` [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC Brian Inglis
@ 2023-02-05 22:59 ` Brian Inglis
2023-02-05 22:59 ` [PATCH 03/11] man2/: use consistent interval notation for value ranges Brian Inglis
2023-02-05 22:59 ` [PATCH 04/11] man2/open.2: punctuate octal perms with digit separators Brian Inglis
3 siblings, 0 replies; 12+ messages in thread
From: Brian Inglis @ 2023-02-05 22:59 UTC (permalink / raw)
To: Linux Man-Pages; +Cc: Alejandro Colomar
[-- Attachment #1: Type: text/plain, Size: 75 bytes --]
---
man2/spu_run.2 | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0002-man2-spu_run.2-fix-example-comment-status-code-or-ed.patch --]
[-- Type: text/x-patch; name="0002-man2-spu_run.2-fix-example-comment-status-code-or-ed.patch", Size: 432 bytes --]
diff --git a/man2/spu_run.2 b/man2/spu_run.2
index 00d552986052..139f10a97a80 100644
--- a/man2/spu_run.2
+++ b/man2/spu_run.2
@@ -245,7 +245,7 @@ int main(void)
err(EXIT_FAILURE, "open");
/*
- * We should see a status code of 0x1234002:
+ * We should see a status code of 0x12340002:
* 0x00000002 (spu was stopped due to stop\-and\-signal)
* | 0x12340000 (the stop\-and\-signal code)
*/
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 03/11] man2/: use consistent interval notation for value ranges
2023-02-05 22:59 [PATCH 00/11] man2/: punctuate long numeric strings with digit separators Brian Inglis
2023-02-05 22:59 ` [PATCH 01/11] man2/shmget.2: fix limit units suffix from SI to IEC Brian Inglis
2023-02-05 22:59 ` [PATCH 02/11] man2/spu_run.2: fix example comment status code or-ed value Brian Inglis
@ 2023-02-05 22:59 ` Brian Inglis
2023-02-05 22:59 ` [PATCH 04/11] man2/open.2: punctuate octal perms with digit separators Brian Inglis
3 siblings, 0 replies; 12+ messages in thread
From: Brian Inglis @ 2023-02-05 22:59 UTC (permalink / raw)
To: Linux Man-Pages; +Cc: Alejandro Colomar
[-- Attachment #1: Type: text/plain, Size: 245 bytes --]
---
man2/clock_getres.2 | 2 +-
man2/clock_nanosleep.2 | 2 +-
man2/getitimer.2 | 4 ++--
man2/gettimeofday.2 | 2 +-
man2/nanosleep.2 | 4 ++--
man2/utimensat.2 | 2 +-
6 files changed, 8 insertions(+), 8 deletions(-)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0003-man2-use-consistent-interval-notation-for-value-rang.patch --]
[-- Type: text/x-patch; name="0003-man2-use-consistent-interval-notation-for-value-rang.patch", Size: 2983 bytes --]
diff --git a/man2/clock_getres.2 b/man2/clock_getres.2
index 501c878cae4e..ee0fa6735865 100644
--- a/man2/clock_getres.2
+++ b/man2/clock_getres.2
@@ -272,7 +272,7 @@ does not refer to a valid instance of a clock object.
.I tp.tv_sec
is negative or
.I tp.tv_nsec
-is outside the range [0..999,999,999].
+is outside the range [0, 999,999,999].
.TP
.B EINVAL
The
diff --git a/man2/clock_nanosleep.2 b/man2/clock_nanosleep.2
index 5afc2025c853..5da8d15699c2 100644
--- a/man2/clock_nanosleep.2
+++ b/man2/clock_nanosleep.2
@@ -158,7 +158,7 @@ The sleep was interrupted by a signal handler; see
.B EINVAL
The value in the
.I tv_nsec
-field was not in the range 0 to 999999999 or
+field was not in the range [0, 999999999] or
.I tv_sec
was negative.
.TP
diff --git a/man2/getitimer.2 b/man2/getitimer.2
index 093752b620ed..80745dd78c99 100644
--- a/man2/getitimer.2
+++ b/man2/getitimer.2
@@ -158,7 +158,7 @@ or (since Linux 2.6.22) one of the
.I tv_usec
fields in the structure pointed to by
.I new_value
-contains a value outside the range 0 to 999999.
+contains a value outside the range [0, 999999].
.SH STANDARDS
POSIX.1-2001, SVr4, 4.4BSD (this call first appeared in 4.2BSD).
POSIX.1-2008 marks
@@ -253,7 +253,7 @@ POSIX.1-2001 says that
.BR setitimer ()
should fail if a
.I tv_usec
-value is specified that is outside of the range 0 to 999999.
+value is specified that is outside of the range [0, 999999].
However, up to and including Linux 2.6.21,
Linux does not give an error, but instead silently
adjusts the corresponding seconds value for the timer.
diff --git a/man2/gettimeofday.2 b/man2/gettimeofday.2
index 6f1cd33d6512..d7219f9d42a4 100644
--- a/man2/gettimeofday.2
+++ b/man2/gettimeofday.2
@@ -152,7 +152,7 @@ is invalid.
.I tv.tv_sec
is negative or
.I tv.tv_usec
-is outside the range [0..999,999].
+is outside the range [0, 999999].
.TP
.BR EINVAL " (since Linux 4.3)"
.\" commit e1d7ba8735551ed79c7a0463a042353574b96da3
diff --git a/man2/nanosleep.2 b/man2/nanosleep.2
index a6f9e627f4eb..12e0cee84b85 100644
--- a/man2/nanosleep.2
+++ b/man2/nanosleep.2
@@ -66,7 +66,7 @@ The
structure
is used to specify intervals of time with nanosecond precision.
.PP
-The value of the nanoseconds field must be in the range 0 to 999999999.
+The value of the nanoseconds field must be in the range [0, 999999999].
.PP
Compared to
.BR sleep (3)
@@ -106,7 +106,7 @@ again and continue with the pause.
.B EINVAL
The value in the
.I tv_nsec
-field was not in the range 0 to 999999999 or
+field was not in the range [0, 999999999] or
.I tv_sec
was negative.
.SH STANDARDS
diff --git a/man2/utimensat.2 b/man2/utimensat.2
index 7f43aab7bdcf..1d9206ed0ced 100644
--- a/man2/utimensat.2
+++ b/man2/utimensat.2
@@ -272,7 +272,7 @@ Invalid value in
.B EINVAL
Invalid value in one of the
.I tv_nsec
-fields (value outside range 0 to 999,999,999, and not
+fields (value outside range [0, 999999999], and not
.B UTIME_NOW
or
.BR UTIME_OMIT );
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 04/11] man2/open.2: punctuate octal perms with digit separators
2023-02-05 22:59 [PATCH 00/11] man2/: punctuate long numeric strings with digit separators Brian Inglis
` (2 preceding siblings ...)
2023-02-05 22:59 ` [PATCH 03/11] man2/: use consistent interval notation for value ranges Brian Inglis
@ 2023-02-05 22:59 ` Brian Inglis
3 siblings, 0 replies; 12+ messages in thread
From: Brian Inglis @ 2023-02-05 22:59 UTC (permalink / raw)
To: Linux Man-Pages; +Cc: Alejandro Colomar
[-- Attachment #1: Type: text/plain, Size: 107 bytes --]
---
man2/open.2 | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0004-man2-open.2-punctuate-octal-perms-with-digit-separat.patch --]
[-- Type: text/x-patch; name="0004-man2-open.2-punctuate-octal-perms-with-digit-separat.patch", Size: 2287 bytes --]
diff --git a/man2/open.2 b/man2/open.2
index fc796e25537d..82e3e2102e7c 100644
--- a/man2/open.2
+++ b/man2/open.2
@@ -308,40 +308,40 @@ The following symbolic constants are provided for
.RS
.TP 9
.B S_IRWXU
-00700 user (file owner) has read, write, and execute permission
+00\[aq]700 user (file owner) has read, write, and execute permission
.TP
.B S_IRUSR
-00400 user has read permission
+00\[aq]400 user has read permission
.TP
.B S_IWUSR
-00200 user has write permission
+00\[aq]200 user has write permission
.TP
.B S_IXUSR
-00100 user has execute permission
+00\[aq]100 user has execute permission
.TP
.B S_IRWXG
-00070 group has read, write, and execute permission
+00\[aq]070 group has read, write, and execute permission
.TP
.B S_IRGRP
-00040 group has read permission
+00\[aq]040 group has read permission
.TP
.B S_IWGRP
-00020 group has write permission
+00\[aq]020 group has write permission
.TP
.B S_IXGRP
-00010 group has execute permission
+00\[aq]010 group has execute permission
.TP
.B S_IRWXO
-00007 others have read, write, and execute permission
+00\[aq]007 others have read, write, and execute permission
.TP
.B S_IROTH
-00004 others have read permission
+00\[aq]004 others have read permission
.TP
.B S_IWOTH
-00002 others have write permission
+00\[aq]002 others have write permission
.TP
.B S_IXOTH
-00001 others have execute permission
+00\[aq]001 others have execute permission
.RE
.IP
According to POSIX, the effect when other bits are set in
@@ -352,14 +352,14 @@ On Linux, the following bits are also honored in
.RS
.TP 9
.B S_ISUID
-0004000 set-user-ID bit
+0\[aq]004\[aq]000 set-user-ID bit
.TP
.B S_ISGID
-0002000 set-group-ID bit (see
+0\[aq]002\[aq]000 set-group-ID bit (see
.BR inode (7)).
.TP
.B S_ISVTX
-0001000 sticky bit (see
+0\[aq]001\[aq]000 sticky bit (see
.BR inode (7)).
.RE
.TP
@@ -1319,7 +1319,7 @@ flags are not specified in POSIX.1-2001,
but are specified in POSIX.1-2008.
Since glibc 2.12, one can obtain their definitions by defining either
.B _POSIX_C_SOURCE
-with a value greater than or equal to 200809L or
+with a value greater than or equal to 2008\[aq]09L or
.B _XOPEN_SOURCE
with a value greater than or equal to 700.
In glibc 2.11 and earlier, one obtains the definitions by defining
^ permalink raw reply related [flat|nested] 12+ messages in thread