From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Stephen Boyd <sboyd@kernel.org>, Michael Turquette <mturquette@baylibre.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Taniya Das <quic_tdas@quicinc.com> Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, Rob Clark <robdclark@gmail.com>, Abhinav Kumar <quic_abhinavk@quicinc.com>, Sean Paul <sean@poorly.run>, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org, David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch> Subject: [PATCH v2 5/8] arm64: dts: qcom: sm8350: move more nodes to correct place Date: Mon, 6 Feb 2023 16:57:04 +0200 [thread overview] Message-ID: <20230206145707.122937-6-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20230206145707.122937-1-dmitry.baryshkov@linaro.org> Continue ordering DT nodes. Move RNG, UFS, system NoC and SLPI nodes to the proper position. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 314 +++++++++++++-------------- 1 file changed, 157 insertions(+), 157 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 061aa3fec1c4..c327dc925793 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1423,6 +1423,13 @@ spi13: spi@a94000 { }; }; + rng: rng@10d3000 { + compatible = "qcom,prng-ee"; + reg = <0 0x010d3000 0 0x1000>; + clocks = <&rpmhcc RPMH_HWKM_CLK>; + clock-names = "core"; + }; + config_noc: interconnect@1500000 { compatible = "qcom,sm8350-config-noc"; reg = <0 0x01500000 0 0xa580>; @@ -1643,18 +1650,76 @@ pcie1_phy: phy@1c0f000 { status = "disabled"; }; - lpass_ag_noc: interconnect@3c40000 { - compatible = "qcom,sm8350-lpass-ag-noc"; - reg = <0 0x03c40000 0 0xf080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; }; - compute_noc: interconnect@a0c0000 { - compatible = "qcom,sm8350-compute-noc"; - reg = <0 0x0a0c0000 0 0xa180>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x188>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x188>, + <0 0x01d87a00 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; ipa: ipa@1e40000 { @@ -1702,6 +1767,13 @@ tcsr_mutex: hwlock@1f40000 { #hwlock-cells = <1>; }; + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8350-lpass-ag-noc"; + reg = <0 0x03c40000 0 0xf080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + mpss: remoteproc@4080000 { compatible = "qcom,sm8350-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; @@ -1744,6 +1816,74 @@ IPCC_MPROC_SIGNAL_GLINK_QMP }; }; + slpi: remoteproc@5c00000 { + compatible = "qcom,sm8350-slpi-pas"; + reg = <0 0x05c00000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8350-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -2014,153 +2154,6 @@ qup_i2c19_default: qup-i2c19-default-state { }; }; - rng: rng@10d3000 { - compatible = "qcom,prng-ee"; - reg = <0 0x010d3000 0 0x1000>; - clocks = <&rpmhcc RPMH_HWKM_CLK>; - clock-names = "core"; - }; - - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,sm8350-ufshc", "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x3000>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - #reset-cells = <1>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; - - power-domains = <&gcc UFS_PHY_GDSC>; - - iommus = <&apps_smmu 0xe0 0x0>; - - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - clocks = - <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <75000000 300000000>, - <0 0>, - <0 0>, - <75000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - status = "disabled"; - }; - - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sm8350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clock-names = "ref", - "ref_aux"; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - status = "disabled"; - - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x188>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x188>, - <0 0x01d87a00 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; - }; - - slpi: remoteproc@5c00000 { - compatible = "qcom,sm8350-slpi-pas"; - reg = <0 0x05c00000 0 0x4000>; - - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SM8350_LCX>, - <&rpmhpd SM8350_LMX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&pil_slpi_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_slpi_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "slpi"; - qcom,remote-pid = <3>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "sdsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x0541 0x0>; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x0542 0x0>; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x0543 0x0>; - /* note: shared-cb = <4> in downstream */ - }; - }; - }; - }; - sdhc_2: mmc@8804000 { compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2309,6 +2302,13 @@ system-cache-controller@9200000 { reg-names = "llcc_base", "llcc_broadcast_base"; }; + compute_noc: interconnect@a0c0000 { + compatible = "qcom,sm8350-compute-noc"; + reg = <0 0x0a0c0000 0 0xa180>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; -- 2.39.1
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Stephen Boyd <sboyd@kernel.org>, Michael Turquette <mturquette@baylibre.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Taniya Das <quic_tdas@quicinc.com> Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, Abhinav Kumar <quic_abhinavk@quicinc.com>, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org, Sean Paul <sean@poorly.run>, linux-clk@vger.kernel.org Subject: [PATCH v2 5/8] arm64: dts: qcom: sm8350: move more nodes to correct place Date: Mon, 6 Feb 2023 16:57:04 +0200 [thread overview] Message-ID: <20230206145707.122937-6-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20230206145707.122937-1-dmitry.baryshkov@linaro.org> Continue ordering DT nodes. Move RNG, UFS, system NoC and SLPI nodes to the proper position. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 314 +++++++++++++-------------- 1 file changed, 157 insertions(+), 157 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 061aa3fec1c4..c327dc925793 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1423,6 +1423,13 @@ spi13: spi@a94000 { }; }; + rng: rng@10d3000 { + compatible = "qcom,prng-ee"; + reg = <0 0x010d3000 0 0x1000>; + clocks = <&rpmhcc RPMH_HWKM_CLK>; + clock-names = "core"; + }; + config_noc: interconnect@1500000 { compatible = "qcom,sm8350-config-noc"; reg = <0 0x01500000 0 0xa580>; @@ -1643,18 +1650,76 @@ pcie1_phy: phy@1c0f000 { status = "disabled"; }; - lpass_ag_noc: interconnect@3c40000 { - compatible = "qcom,sm8350-lpass-ag-noc"; - reg = <0 0x03c40000 0 0xf080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; }; - compute_noc: interconnect@a0c0000 { - compatible = "qcom,sm8350-compute-noc"; - reg = <0 0x0a0c0000 0 0xa180>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x188>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x188>, + <0 0x01d87a00 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; ipa: ipa@1e40000 { @@ -1702,6 +1767,13 @@ tcsr_mutex: hwlock@1f40000 { #hwlock-cells = <1>; }; + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8350-lpass-ag-noc"; + reg = <0 0x03c40000 0 0xf080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + mpss: remoteproc@4080000 { compatible = "qcom,sm8350-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; @@ -1744,6 +1816,74 @@ IPCC_MPROC_SIGNAL_GLINK_QMP }; }; + slpi: remoteproc@5c00000 { + compatible = "qcom,sm8350-slpi-pas"; + reg = <0 0x05c00000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8350-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -2014,153 +2154,6 @@ qup_i2c19_default: qup-i2c19-default-state { }; }; - rng: rng@10d3000 { - compatible = "qcom,prng-ee"; - reg = <0 0x010d3000 0 0x1000>; - clocks = <&rpmhcc RPMH_HWKM_CLK>; - clock-names = "core"; - }; - - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,sm8350-ufshc", "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x3000>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - #reset-cells = <1>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; - - power-domains = <&gcc UFS_PHY_GDSC>; - - iommus = <&apps_smmu 0xe0 0x0>; - - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - clocks = - <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <75000000 300000000>, - <0 0>, - <0 0>, - <75000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - status = "disabled"; - }; - - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sm8350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clock-names = "ref", - "ref_aux"; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - status = "disabled"; - - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x188>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x188>, - <0 0x01d87a00 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; - }; - - slpi: remoteproc@5c00000 { - compatible = "qcom,sm8350-slpi-pas"; - reg = <0 0x05c00000 0 0x4000>; - - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SM8350_LCX>, - <&rpmhpd SM8350_LMX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&pil_slpi_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_slpi_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "slpi"; - qcom,remote-pid = <3>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "sdsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x0541 0x0>; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x0542 0x0>; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x0543 0x0>; - /* note: shared-cb = <4> in downstream */ - }; - }; - }; - }; - sdhc_2: mmc@8804000 { compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2309,6 +2302,13 @@ system-cache-controller@9200000 { reg-names = "llcc_base", "llcc_broadcast_base"; }; + compute_noc: interconnect@a0c0000 { + compatible = "qcom,sm8350-compute-noc"; + reg = <0 0x0a0c0000 0 0xa180>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; -- 2.39.1
next prev parent reply other threads:[~2023-02-06 14:57 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-02-06 14:56 [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board Dmitry Baryshkov 2023-02-06 14:56 ` Dmitry Baryshkov 2023-02-06 14:57 ` [PATCH v2 1/8] dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml Dmitry Baryshkov 2023-02-06 14:57 ` [PATCH v2 1/8] dt-bindings: clock: Merge qcom, gpucc-sm8350 into qcom, gpucc.yaml Dmitry Baryshkov 2023-02-07 20:40 ` [PATCH v2 1/8] dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml Rob Herring 2023-02-07 20:40 ` Rob Herring 2023-02-06 14:57 ` [PATCH v2 2/8] dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 Dmitry Baryshkov 2023-02-06 14:57 ` [PATCH v2 2/8] dt-bindings: power: qcom, rpmpd: " Dmitry Baryshkov 2023-02-06 20:19 ` [PATCH v2 2/8] dt-bindings: power: qcom,rpmpd: " Konrad Dybcio 2023-02-06 20:19 ` Konrad Dybcio 2023-02-06 14:57 ` [PATCH v2 3/8] dt-bindings: display/msm/gmu: add Adreno 660 support Dmitry Baryshkov 2023-02-06 14:57 ` Dmitry Baryshkov 2023-02-07 20:41 ` Rob Herring 2023-02-07 20:41 ` Rob Herring 2023-02-06 14:57 ` [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes Dmitry Baryshkov 2023-02-06 14:57 ` Dmitry Baryshkov 2023-02-08 9:22 ` Konrad Dybcio 2023-02-08 9:22 ` Konrad Dybcio 2023-02-09 3:28 ` Bjorn Andersson 2023-02-09 3:28 ` Bjorn Andersson 2023-02-09 13:40 ` Dmitry Baryshkov 2023-02-09 13:40 ` Dmitry Baryshkov 2023-02-06 14:57 ` Dmitry Baryshkov [this message] 2023-02-06 14:57 ` [PATCH v2 5/8] arm64: dts: qcom: sm8350: move more nodes to correct place Dmitry Baryshkov 2023-02-06 14:57 ` [PATCH v2 6/8] arm64: dts: qcom: sm8350: finish reordering nodes Dmitry Baryshkov 2023-02-06 14:57 ` Dmitry Baryshkov 2023-02-06 14:57 ` [PATCH v2 7/8] arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes Dmitry Baryshkov 2023-02-06 14:57 ` Dmitry Baryshkov 2023-02-06 14:57 ` [PATCH v2 8/8] arm64: dts: qcom: sm8350-hdk: enable GPU Dmitry Baryshkov 2023-02-06 14:57 ` Dmitry Baryshkov 2023-02-08 16:43 ` Konrad Dybcio 2023-02-08 16:43 ` Konrad Dybcio 2023-02-09 4:22 ` (subset) [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board Bjorn Andersson 2023-02-09 4:22 ` Bjorn Andersson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230206145707.122937-6-dmitry.baryshkov@linaro.org \ --to=dmitry.baryshkov@linaro.org \ --cc=agross@kernel.org \ --cc=airlied@gmail.com \ --cc=andersson@kernel.org \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-clk@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=quic_abhinavk@quicinc.com \ --cc=quic_tdas@quicinc.com \ --cc=robdclark@gmail.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=sean@poorly.run \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.