* [PATCH v2 0/7] ASoC: dt-bindings: meson: covert axg audio to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic, Jerome Brunet
Convert AXG audio dt-binding documentation to schema
Changes since v1:
* Drop 2 patches applied with v1
* Drop node name patterns
* Fix examples indentation
* Yaml fixups requested by Krzysztof
Jerome Brunet (7):
ASoC: dt-bindings: meson: convert axg tdm interface to schema
ASoC: dt-bindings: meson: convert axg tdm formatters to schema
ASoC: dt-bindings: meson: convert axg pdm to schema
ASoC: dt-bindings: meson: convert axg fifo to schema
ASoC: dt-bindings: meson: convert axg spdif input to schema
ASoC: dt-bindings: meson: convert axg spdif output to schema
ASoC: dt-bindings: meson: convert axg sound card control to schema
.../bindings/sound/amlogic,axg-fifo.txt | 34 ----
.../bindings/sound/amlogic,axg-fifo.yaml | 112 +++++++++++
.../bindings/sound/amlogic,axg-pdm.txt | 29 ---
.../bindings/sound/amlogic,axg-pdm.yaml | 82 ++++++++
.../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
.../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
.../bindings/sound/amlogic,axg-spdifin.txt | 27 ---
.../bindings/sound/amlogic,axg-spdifin.yaml | 86 ++++++++
.../bindings/sound/amlogic,axg-spdifout.txt | 25 ---
.../bindings/sound/amlogic,axg-spdifout.yaml | 79 ++++++++
.../sound/amlogic,axg-tdm-formatters.txt | 36 ----
.../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++
.../bindings/sound/amlogic,axg-tdm-iface.txt | 22 ---
.../bindings/sound/amlogic,axg-tdm-iface.yaml | 55 ++++++
14 files changed, 685 insertions(+), 297 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
--
2.39.0
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH v2 0/7] ASoC: dt-bindings: meson: covert axg audio to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert AXG audio dt-binding documentation to schema
Changes since v1:
* Drop 2 patches applied with v1
* Drop node name patterns
* Fix examples indentation
* Yaml fixups requested by Krzysztof
Jerome Brunet (7):
ASoC: dt-bindings: meson: convert axg tdm interface to schema
ASoC: dt-bindings: meson: convert axg tdm formatters to schema
ASoC: dt-bindings: meson: convert axg pdm to schema
ASoC: dt-bindings: meson: convert axg fifo to schema
ASoC: dt-bindings: meson: convert axg spdif input to schema
ASoC: dt-bindings: meson: convert axg spdif output to schema
ASoC: dt-bindings: meson: convert axg sound card control to schema
.../bindings/sound/amlogic,axg-fifo.txt | 34 ----
.../bindings/sound/amlogic,axg-fifo.yaml | 112 +++++++++++
.../bindings/sound/amlogic,axg-pdm.txt | 29 ---
.../bindings/sound/amlogic,axg-pdm.yaml | 82 ++++++++
.../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
.../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
.../bindings/sound/amlogic,axg-spdifin.txt | 27 ---
.../bindings/sound/amlogic,axg-spdifin.yaml | 86 ++++++++
.../bindings/sound/amlogic,axg-spdifout.txt | 25 ---
.../bindings/sound/amlogic,axg-spdifout.yaml | 79 ++++++++
.../sound/amlogic,axg-tdm-formatters.txt | 36 ----
.../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++
.../bindings/sound/amlogic,axg-tdm-iface.txt | 22 ---
.../bindings/sound/amlogic,axg-tdm-iface.yaml | 55 ++++++
14 files changed, 685 insertions(+), 297 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
--
2.39.0
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH v2 0/7] ASoC: dt-bindings: meson: covert axg audio to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert AXG audio dt-binding documentation to schema
Changes since v1:
* Drop 2 patches applied with v1
* Drop node name patterns
* Fix examples indentation
* Yaml fixups requested by Krzysztof
Jerome Brunet (7):
ASoC: dt-bindings: meson: convert axg tdm interface to schema
ASoC: dt-bindings: meson: convert axg tdm formatters to schema
ASoC: dt-bindings: meson: convert axg pdm to schema
ASoC: dt-bindings: meson: convert axg fifo to schema
ASoC: dt-bindings: meson: convert axg spdif input to schema
ASoC: dt-bindings: meson: convert axg spdif output to schema
ASoC: dt-bindings: meson: convert axg sound card control to schema
.../bindings/sound/amlogic,axg-fifo.txt | 34 ----
.../bindings/sound/amlogic,axg-fifo.yaml | 112 +++++++++++
.../bindings/sound/amlogic,axg-pdm.txt | 29 ---
.../bindings/sound/amlogic,axg-pdm.yaml | 82 ++++++++
.../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
.../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
.../bindings/sound/amlogic,axg-spdifin.txt | 27 ---
.../bindings/sound/amlogic,axg-spdifin.yaml | 86 ++++++++
.../bindings/sound/amlogic,axg-spdifout.txt | 25 ---
.../bindings/sound/amlogic,axg-spdifout.yaml | 79 ++++++++
.../sound/amlogic,axg-tdm-formatters.txt | 36 ----
.../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++
.../bindings/sound/amlogic,axg-tdm-iface.txt | 22 ---
.../bindings/sound/amlogic,axg-tdm-iface.yaml | 55 ++++++
14 files changed, 685 insertions(+), 297 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
--
2.39.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH v2 1/7] ASoC: dt-bindings: meson: convert axg tdm interface to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 15:34 ` Jerome Brunet
-1 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic, Jerome Brunet
Convert the DT binding documentation for the Amlogic tdm interface to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-tdm-iface.txt | 22 --------
.../bindings/sound/amlogic,axg-tdm-iface.yaml | 55 +++++++++++++++++++
2 files changed, 55 insertions(+), 22 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
deleted file mode 100644
index cabfb26a5f22..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic Audio TDM Interfaces
-
-Required properties:
-- compatible: 'amlogic,axg-tdm-iface'
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "sclk" : bit clock.
- * "lrclk": sample clock
- * "mclk" : master clock
- -> optional if the interface is in clock slave mode.
-- #sound-dai-cells: must be 0.
-
-Example of TDM_A on the A113 SoC:
-
-tdmif_a: audio-controller@0 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
- <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
new file mode 100644
index 000000000000..320f0002649d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio TDM Interfaces
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: amlogic,axg-tdm-iface
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ minItems: 2
+ items:
+ - description: Bit clock
+ - description: Sample clock
+ - description: Master clock #optional
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: sclk
+ - const: lrclk
+ - const: mclk
+
+required:
+ - compatible
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+
+ audio-controller {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+ clock-names = "sclk", "lrclk", "mclk";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 1/7] ASoC: dt-bindings: meson: convert axg tdm interface to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic tdm interface to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-tdm-iface.txt | 22 --------
.../bindings/sound/amlogic,axg-tdm-iface.yaml | 55 +++++++++++++++++++
2 files changed, 55 insertions(+), 22 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
deleted file mode 100644
index cabfb26a5f22..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic Audio TDM Interfaces
-
-Required properties:
-- compatible: 'amlogic,axg-tdm-iface'
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "sclk" : bit clock.
- * "lrclk": sample clock
- * "mclk" : master clock
- -> optional if the interface is in clock slave mode.
-- #sound-dai-cells: must be 0.
-
-Example of TDM_A on the A113 SoC:
-
-tdmif_a: audio-controller@0 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
- <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
new file mode 100644
index 000000000000..320f0002649d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio TDM Interfaces
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: amlogic,axg-tdm-iface
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ minItems: 2
+ items:
+ - description: Bit clock
+ - description: Sample clock
+ - description: Master clock #optional
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: sclk
+ - const: lrclk
+ - const: mclk
+
+required:
+ - compatible
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+
+ audio-controller {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+ clock-names = "sclk", "lrclk", "mclk";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 1/7] ASoC: dt-bindings: meson: convert axg tdm interface to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic tdm interface to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-tdm-iface.txt | 22 --------
.../bindings/sound/amlogic,axg-tdm-iface.yaml | 55 +++++++++++++++++++
2 files changed, 55 insertions(+), 22 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
deleted file mode 100644
index cabfb26a5f22..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic Audio TDM Interfaces
-
-Required properties:
-- compatible: 'amlogic,axg-tdm-iface'
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "sclk" : bit clock.
- * "lrclk": sample clock
- * "mclk" : master clock
- -> optional if the interface is in clock slave mode.
-- #sound-dai-cells: must be 0.
-
-Example of TDM_A on the A113 SoC:
-
-tdmif_a: audio-controller@0 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
- <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
new file mode 100644
index 000000000000..320f0002649d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio TDM Interfaces
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: amlogic,axg-tdm-iface
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ minItems: 2
+ items:
+ - description: Bit clock
+ - description: Sample clock
+ - description: Master clock #optional
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: sclk
+ - const: lrclk
+ - const: mclk
+
+required:
+ - compatible
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+
+ audio-controller {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+ clock-names = "sclk", "lrclk", "mclk";
+ };
--
2.39.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 15:34 ` Jerome Brunet
-1 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic, Jerome Brunet
Convert the DT binding documentation for the Amlogic tdm formatters to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../sound/amlogic,axg-tdm-formatters.txt | 36 --------
.../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
2 files changed, 88 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
deleted file mode 100644
index 5996c0cd89c2..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Amlogic Audio TDM formatters
-
-Required properties:
-- compatible: 'amlogic,axg-tdmin' or
- 'amlogic,axg-tdmout' or
- 'amlogic,g12a-tdmin' or
- 'amlogic,g12a-tdmout' or
- 'amlogic,sm1-tdmin' or
- 'amlogic,sm1-tdmout
-- reg: physical base address of the controller and length of memory
- mapped region.
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "sclk" : bit clock.
- * "sclk_sel" : bit clock input multiplexer.
- * "lrclk" : sample clock
- * "lrclk_sel": sample clock input multiplexer
-
-Optional property:
-- resets: phandle to the dedicated reset line of the tdm formatter.
-
-Example of TDMOUT_A on the S905X2 SoC:
-
-tdmout_a: audio-controller@500 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x500 0x0 0x40>;
- resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
new file mode 100644
index 000000000000..719ca8fc98c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG TDM formatters
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,g12a-tdmout
+ - amlogic,sm1-tdmout
+ - amlogic,axg-tdmout
+ - amlogic,g12a-tdmin
+ - amlogic,sm1-tdmin
+ - amlogic,axg-tdmin
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: Bit clock
+ - description: Bit clock input multiplexer
+ - description: Sample clock
+ - description: Sample clock input multiplexer
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: sclk
+ - const: sclk_sel
+ - const: lrclk
+ - const: lrclk_sel
+
+ reg:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: component-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-tdmin
+ - amlogic,sm1-tdmin
+ - amlogic,g12a-tdmout
+ - amlogic,sm1-tdmout
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+ #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+ audio-controller@500 {
+ compatible = "amlogic,g12a-tdmout";
+ reg = <0x500 0x40>;
+ resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic tdm formatters to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../sound/amlogic,axg-tdm-formatters.txt | 36 --------
.../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
2 files changed, 88 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
deleted file mode 100644
index 5996c0cd89c2..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Amlogic Audio TDM formatters
-
-Required properties:
-- compatible: 'amlogic,axg-tdmin' or
- 'amlogic,axg-tdmout' or
- 'amlogic,g12a-tdmin' or
- 'amlogic,g12a-tdmout' or
- 'amlogic,sm1-tdmin' or
- 'amlogic,sm1-tdmout
-- reg: physical base address of the controller and length of memory
- mapped region.
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "sclk" : bit clock.
- * "sclk_sel" : bit clock input multiplexer.
- * "lrclk" : sample clock
- * "lrclk_sel": sample clock input multiplexer
-
-Optional property:
-- resets: phandle to the dedicated reset line of the tdm formatter.
-
-Example of TDMOUT_A on the S905X2 SoC:
-
-tdmout_a: audio-controller@500 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x500 0x0 0x40>;
- resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
new file mode 100644
index 000000000000..719ca8fc98c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG TDM formatters
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,g12a-tdmout
+ - amlogic,sm1-tdmout
+ - amlogic,axg-tdmout
+ - amlogic,g12a-tdmin
+ - amlogic,sm1-tdmin
+ - amlogic,axg-tdmin
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: Bit clock
+ - description: Bit clock input multiplexer
+ - description: Sample clock
+ - description: Sample clock input multiplexer
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: sclk
+ - const: sclk_sel
+ - const: lrclk
+ - const: lrclk_sel
+
+ reg:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: component-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-tdmin
+ - amlogic,sm1-tdmin
+ - amlogic,g12a-tdmout
+ - amlogic,sm1-tdmout
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+ #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+ audio-controller@500 {
+ compatible = "amlogic,g12a-tdmout";
+ reg = <0x500 0x40>;
+ resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic tdm formatters to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../sound/amlogic,axg-tdm-formatters.txt | 36 --------
.../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
2 files changed, 88 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
deleted file mode 100644
index 5996c0cd89c2..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Amlogic Audio TDM formatters
-
-Required properties:
-- compatible: 'amlogic,axg-tdmin' or
- 'amlogic,axg-tdmout' or
- 'amlogic,g12a-tdmin' or
- 'amlogic,g12a-tdmout' or
- 'amlogic,sm1-tdmin' or
- 'amlogic,sm1-tdmout
-- reg: physical base address of the controller and length of memory
- mapped region.
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "sclk" : bit clock.
- * "sclk_sel" : bit clock input multiplexer.
- * "lrclk" : sample clock
- * "lrclk_sel": sample clock input multiplexer
-
-Optional property:
-- resets: phandle to the dedicated reset line of the tdm formatter.
-
-Example of TDMOUT_A on the S905X2 SoC:
-
-tdmout_a: audio-controller@500 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x500 0x0 0x40>;
- resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
new file mode 100644
index 000000000000..719ca8fc98c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG TDM formatters
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,g12a-tdmout
+ - amlogic,sm1-tdmout
+ - amlogic,axg-tdmout
+ - amlogic,g12a-tdmin
+ - amlogic,sm1-tdmin
+ - amlogic,axg-tdmin
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: Bit clock
+ - description: Bit clock input multiplexer
+ - description: Sample clock
+ - description: Sample clock input multiplexer
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: sclk
+ - const: sclk_sel
+ - const: lrclk
+ - const: lrclk_sel
+
+ reg:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: component-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-tdmin
+ - amlogic,sm1-tdmin
+ - amlogic,g12a-tdmout
+ - amlogic,sm1-tdmout
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+ #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+ audio-controller@500 {
+ compatible = "amlogic,g12a-tdmout";
+ reg = <0x500 0x40>;
+ resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ };
--
2.39.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 3/7] ASoC: dt-bindings: meson: convert axg pdm to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 15:34 ` Jerome Brunet
-1 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg PDM device to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-pdm.txt | 29 -------
.../bindings/sound/amlogic,axg-pdm.yaml | 82 +++++++++++++++++++
2 files changed, 82 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
deleted file mode 100644
index 716878107a24..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Amlogic Audio PDM input
-
-Required properties:
-- compatible: 'amlogic,axg-pdm' or
- 'amlogic,g12a-pdm' or
- 'amlogic,sm1-pdm'
-- reg: physical base address of the controller and length of memory
- mapped region.
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "dclk" : pdm digital clock
- * "sysclk" : dsp system clock
-- #sound-dai-cells: must be 0.
-
-Optional property:
-- resets: phandle to the dedicated reset line of the pdm input.
-
-Example of PDM on the A113 SoC:
-
-pdm: audio-controller@ff632000 {
- compatible = "amlogic,axg-pdm";
- reg = <0x0 0xff632000 0x0 0x34>;
- #sound-dai-cells = <0>;
- clocks = <&clkc_audio AUD_CLKID_PDM>,
- <&clkc_audio AUD_CLKID_PDM_DCLK>,
- <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
- clock-names = "pclk", "dclk", "sysclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
new file mode 100644
index 000000000000..df21dd72fc65
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-pdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG PDM input
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,g12a-pdm
+ - amlogic,sm1-pdm
+ - const: amlogic,axg-pdm
+ - const: amlogic,axg-pdm
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: PDM digital clock
+ - description: DSP system clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: dclk
+ - const: sysclk
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: dai-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-pdm
+ - amlogic,sm1-pdm
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+
+ audio-controller@ff632000 {
+ compatible = "amlogic,axg-pdm";
+ reg = <0xff632000 0x34>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_PDM>,
+ <&clkc_audio AUD_CLKID_PDM_DCLK>,
+ <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+ clock-names = "pclk", "dclk", "sysclk";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 3/7] ASoC: dt-bindings: meson: convert axg pdm to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic, Jerome Brunet
Convert the DT binding documentation for the Amlogic axg PDM device to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-pdm.txt | 29 -------
.../bindings/sound/amlogic,axg-pdm.yaml | 82 +++++++++++++++++++
2 files changed, 82 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
deleted file mode 100644
index 716878107a24..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Amlogic Audio PDM input
-
-Required properties:
-- compatible: 'amlogic,axg-pdm' or
- 'amlogic,g12a-pdm' or
- 'amlogic,sm1-pdm'
-- reg: physical base address of the controller and length of memory
- mapped region.
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "dclk" : pdm digital clock
- * "sysclk" : dsp system clock
-- #sound-dai-cells: must be 0.
-
-Optional property:
-- resets: phandle to the dedicated reset line of the pdm input.
-
-Example of PDM on the A113 SoC:
-
-pdm: audio-controller@ff632000 {
- compatible = "amlogic,axg-pdm";
- reg = <0x0 0xff632000 0x0 0x34>;
- #sound-dai-cells = <0>;
- clocks = <&clkc_audio AUD_CLKID_PDM>,
- <&clkc_audio AUD_CLKID_PDM_DCLK>,
- <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
- clock-names = "pclk", "dclk", "sysclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
new file mode 100644
index 000000000000..df21dd72fc65
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-pdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG PDM input
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,g12a-pdm
+ - amlogic,sm1-pdm
+ - const: amlogic,axg-pdm
+ - const: amlogic,axg-pdm
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: PDM digital clock
+ - description: DSP system clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: dclk
+ - const: sysclk
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: dai-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-pdm
+ - amlogic,sm1-pdm
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+
+ audio-controller@ff632000 {
+ compatible = "amlogic,axg-pdm";
+ reg = <0xff632000 0x34>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_PDM>,
+ <&clkc_audio AUD_CLKID_PDM_DCLK>,
+ <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+ clock-names = "pclk", "dclk", "sysclk";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 3/7] ASoC: dt-bindings: meson: convert axg pdm to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg PDM device to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-pdm.txt | 29 -------
.../bindings/sound/amlogic,axg-pdm.yaml | 82 +++++++++++++++++++
2 files changed, 82 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
deleted file mode 100644
index 716878107a24..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Amlogic Audio PDM input
-
-Required properties:
-- compatible: 'amlogic,axg-pdm' or
- 'amlogic,g12a-pdm' or
- 'amlogic,sm1-pdm'
-- reg: physical base address of the controller and length of memory
- mapped region.
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "dclk" : pdm digital clock
- * "sysclk" : dsp system clock
-- #sound-dai-cells: must be 0.
-
-Optional property:
-- resets: phandle to the dedicated reset line of the pdm input.
-
-Example of PDM on the A113 SoC:
-
-pdm: audio-controller@ff632000 {
- compatible = "amlogic,axg-pdm";
- reg = <0x0 0xff632000 0x0 0x34>;
- #sound-dai-cells = <0>;
- clocks = <&clkc_audio AUD_CLKID_PDM>,
- <&clkc_audio AUD_CLKID_PDM_DCLK>,
- <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
- clock-names = "pclk", "dclk", "sysclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
new file mode 100644
index 000000000000..df21dd72fc65
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-pdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG PDM input
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,g12a-pdm
+ - amlogic,sm1-pdm
+ - const: amlogic,axg-pdm
+ - const: amlogic,axg-pdm
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: PDM digital clock
+ - description: DSP system clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: dclk
+ - const: sysclk
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: dai-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-pdm
+ - amlogic,sm1-pdm
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+
+ audio-controller@ff632000 {
+ compatible = "amlogic,axg-pdm";
+ reg = <0xff632000 0x34>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_PDM>,
+ <&clkc_audio AUD_CLKID_PDM_DCLK>,
+ <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+ clock-names = "pclk", "dclk", "sysclk";
+ };
--
2.39.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 4/7] ASoC: dt-bindings: meson: convert axg fifo to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 15:34 ` Jerome Brunet
-1 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic, Jerome Brunet
Convert the DT binding documentation for the Amlogic axg audio FIFOs to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-fifo.txt | 34 ------
.../bindings/sound/amlogic,axg-fifo.yaml | 112 ++++++++++++++++++
2 files changed, 112 insertions(+), 34 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
deleted file mode 100644
index fa4545ed81ca..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Amlogic Audio FIFO controllers
-
-Required properties:
-- compatible: 'amlogic,axg-toddr' or
- 'amlogic,axg-toddr' or
- 'amlogic,g12a-frddr' or
- 'amlogic,g12a-toddr' or
- 'amlogic,sm1-frddr' or
- 'amlogic,sm1-toddr'
-- reg: physical base address of the controller and length of memory
- mapped region.
-- interrupts: interrupt specifier for the fifo.
-- clocks: phandle to the fifo peripheral clock provided by the audio
- clock controller.
-- resets: list of reset phandle, one for each entry reset-names.
-- reset-names: should contain the following:
- * "arb" : memory ARB line (required)
- * "rst" : dedicated device reset line (optional)
-- #sound-dai-cells: must be 0.
-- amlogic,fifo-depth: The size of the controller's fifo in bytes. This
- is useful for determining certain configuration such
- as the flush threshold of the fifo
-
-Example of FRDDR A on the A113 SoC:
-
-frddr_a: audio-controller@1c0 {
- compatible = "amlogic,axg-frddr";
- reg = <0x0 0x1c0 0x0 0x1c>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
- resets = <&arb AXG_ARB_FRDDR_A>;
- fifo-depth = <512>;
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
new file mode 100644
index 000000000000..b1b48d683101
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-fifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG Audio FIFO controllers
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - amlogic,axg-toddr
+ - amlogic,axg-frddr
+ - items:
+ - enum:
+ - amlogic,g12a-toddr
+ - amlogic,sm1-toddr
+ - const: amlogic,axg-toddr
+ - items:
+ - enum:
+ - amlogic,g12a-frddr
+ - amlogic,sm1-frddr
+ - const: amlogic,axg-frddr
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+
+ amlogic,fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Size of the controller's fifo in bytes
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - interrupts
+ - resets
+ - amlogic,fifo-depth
+
+allOf:
+ - $ref: dai-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-toddr
+ - amlogic,sm1-toddr
+ - amlogic,g12a-frddr
+ - amlogic,sm1-frddr
+
+ then:
+ properties:
+ resets:
+ minItems: 2
+ reset-names:
+ items:
+ - const: arb
+ - const: rst
+ required:
+ - reset-names
+
+ else:
+ properties:
+ resets:
+ maxItems: 1
+ reset-names:
+ const: arb
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+ #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+ audio-controller@1c0 {
+ compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr";
+ reg = <0x1c0 0x1c>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+ resets = <&arb>, <&clkc_audio AUD_RESET_FRDDR_A>;
+ reset-names = "arb", "rst";
+ amlogic,fifo-depth = <512>;
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 4/7] ASoC: dt-bindings: meson: convert axg fifo to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg audio FIFOs to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-fifo.txt | 34 ------
.../bindings/sound/amlogic,axg-fifo.yaml | 112 ++++++++++++++++++
2 files changed, 112 insertions(+), 34 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
deleted file mode 100644
index fa4545ed81ca..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Amlogic Audio FIFO controllers
-
-Required properties:
-- compatible: 'amlogic,axg-toddr' or
- 'amlogic,axg-toddr' or
- 'amlogic,g12a-frddr' or
- 'amlogic,g12a-toddr' or
- 'amlogic,sm1-frddr' or
- 'amlogic,sm1-toddr'
-- reg: physical base address of the controller and length of memory
- mapped region.
-- interrupts: interrupt specifier for the fifo.
-- clocks: phandle to the fifo peripheral clock provided by the audio
- clock controller.
-- resets: list of reset phandle, one for each entry reset-names.
-- reset-names: should contain the following:
- * "arb" : memory ARB line (required)
- * "rst" : dedicated device reset line (optional)
-- #sound-dai-cells: must be 0.
-- amlogic,fifo-depth: The size of the controller's fifo in bytes. This
- is useful for determining certain configuration such
- as the flush threshold of the fifo
-
-Example of FRDDR A on the A113 SoC:
-
-frddr_a: audio-controller@1c0 {
- compatible = "amlogic,axg-frddr";
- reg = <0x0 0x1c0 0x0 0x1c>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
- resets = <&arb AXG_ARB_FRDDR_A>;
- fifo-depth = <512>;
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
new file mode 100644
index 000000000000..b1b48d683101
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-fifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG Audio FIFO controllers
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - amlogic,axg-toddr
+ - amlogic,axg-frddr
+ - items:
+ - enum:
+ - amlogic,g12a-toddr
+ - amlogic,sm1-toddr
+ - const: amlogic,axg-toddr
+ - items:
+ - enum:
+ - amlogic,g12a-frddr
+ - amlogic,sm1-frddr
+ - const: amlogic,axg-frddr
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+
+ amlogic,fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Size of the controller's fifo in bytes
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - interrupts
+ - resets
+ - amlogic,fifo-depth
+
+allOf:
+ - $ref: dai-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-toddr
+ - amlogic,sm1-toddr
+ - amlogic,g12a-frddr
+ - amlogic,sm1-frddr
+
+ then:
+ properties:
+ resets:
+ minItems: 2
+ reset-names:
+ items:
+ - const: arb
+ - const: rst
+ required:
+ - reset-names
+
+ else:
+ properties:
+ resets:
+ maxItems: 1
+ reset-names:
+ const: arb
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+ #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+ audio-controller@1c0 {
+ compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr";
+ reg = <0x1c0 0x1c>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+ resets = <&arb>, <&clkc_audio AUD_RESET_FRDDR_A>;
+ reset-names = "arb", "rst";
+ amlogic,fifo-depth = <512>;
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 4/7] ASoC: dt-bindings: meson: convert axg fifo to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg audio FIFOs to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-fifo.txt | 34 ------
.../bindings/sound/amlogic,axg-fifo.yaml | 112 ++++++++++++++++++
2 files changed, 112 insertions(+), 34 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
deleted file mode 100644
index fa4545ed81ca..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Amlogic Audio FIFO controllers
-
-Required properties:
-- compatible: 'amlogic,axg-toddr' or
- 'amlogic,axg-toddr' or
- 'amlogic,g12a-frddr' or
- 'amlogic,g12a-toddr' or
- 'amlogic,sm1-frddr' or
- 'amlogic,sm1-toddr'
-- reg: physical base address of the controller and length of memory
- mapped region.
-- interrupts: interrupt specifier for the fifo.
-- clocks: phandle to the fifo peripheral clock provided by the audio
- clock controller.
-- resets: list of reset phandle, one for each entry reset-names.
-- reset-names: should contain the following:
- * "arb" : memory ARB line (required)
- * "rst" : dedicated device reset line (optional)
-- #sound-dai-cells: must be 0.
-- amlogic,fifo-depth: The size of the controller's fifo in bytes. This
- is useful for determining certain configuration such
- as the flush threshold of the fifo
-
-Example of FRDDR A on the A113 SoC:
-
-frddr_a: audio-controller@1c0 {
- compatible = "amlogic,axg-frddr";
- reg = <0x0 0x1c0 0x0 0x1c>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
- resets = <&arb AXG_ARB_FRDDR_A>;
- fifo-depth = <512>;
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
new file mode 100644
index 000000000000..b1b48d683101
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-fifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG Audio FIFO controllers
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - amlogic,axg-toddr
+ - amlogic,axg-frddr
+ - items:
+ - enum:
+ - amlogic,g12a-toddr
+ - amlogic,sm1-toddr
+ - const: amlogic,axg-toddr
+ - items:
+ - enum:
+ - amlogic,g12a-frddr
+ - amlogic,sm1-frddr
+ - const: amlogic,axg-frddr
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+
+ amlogic,fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Size of the controller's fifo in bytes
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - interrupts
+ - resets
+ - amlogic,fifo-depth
+
+allOf:
+ - $ref: dai-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-toddr
+ - amlogic,sm1-toddr
+ - amlogic,g12a-frddr
+ - amlogic,sm1-frddr
+
+ then:
+ properties:
+ resets:
+ minItems: 2
+ reset-names:
+ items:
+ - const: arb
+ - const: rst
+ required:
+ - reset-names
+
+ else:
+ properties:
+ resets:
+ maxItems: 1
+ reset-names:
+ const: arb
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+ #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+ audio-controller@1c0 {
+ compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr";
+ reg = <0x1c0 0x1c>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+ resets = <&arb>, <&clkc_audio AUD_RESET_FRDDR_A>;
+ reset-names = "arb", "rst";
+ amlogic,fifo-depth = <512>;
+ };
--
2.39.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 5/7] ASoC: dt-bindings: meson: convert axg spdif input to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 15:34 ` Jerome Brunet
-1 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic, Jerome Brunet
Convert the DT binding documentation for the Amlogic axg spdif input to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-spdifin.txt | 27 ------
.../bindings/sound/amlogic,axg-spdifin.yaml | 86 +++++++++++++++++++
2 files changed, 86 insertions(+), 27 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
deleted file mode 100644
index df92a4ecf288..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Amlogic Audio SPDIF Input
-
-Required properties:
-- compatible: 'amlogic,axg-spdifin' or
- 'amlogic,g12a-spdifin' or
- 'amlogic,sm1-spdifin'
-- interrupts: interrupt specifier for the spdif input.
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "refclk" : spdif input reference clock
-- #sound-dai-cells: must be 0.
-
-Optional property:
-- resets: phandle to the dedicated reset line of the spdif input.
-
-Example on the A113 SoC:
-
-spdifin: audio-controller@400 {
- compatible = "amlogic,axg-spdifin";
- reg = <0x0 0x400 0x0 0x30>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
- <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
- clock-names = "pclk", "refclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
new file mode 100644
index 000000000000..a0bd7a5fb9b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG SPDIF Input
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,axg-spdifin
+ - items:
+ - enum:
+ - amlogic,g12a-spdifin
+ - amlogic,sm1-spdifin
+ - const: amlogic,axg-spdifin
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: SPDIF input reference clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: refclk
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+ - interrupts
+
+allOf:
+ - $ref: dai-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-spdifin
+ - amlogic,sm1-spdifin
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ audio-controller@400 {
+ compatible = "amlogic,axg-spdifin";
+ reg = <0x400 0x30>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+ <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+ clock-names = "pclk", "refclk";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 5/7] ASoC: dt-bindings: meson: convert axg spdif input to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg spdif input to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-spdifin.txt | 27 ------
.../bindings/sound/amlogic,axg-spdifin.yaml | 86 +++++++++++++++++++
2 files changed, 86 insertions(+), 27 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
deleted file mode 100644
index df92a4ecf288..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Amlogic Audio SPDIF Input
-
-Required properties:
-- compatible: 'amlogic,axg-spdifin' or
- 'amlogic,g12a-spdifin' or
- 'amlogic,sm1-spdifin'
-- interrupts: interrupt specifier for the spdif input.
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "refclk" : spdif input reference clock
-- #sound-dai-cells: must be 0.
-
-Optional property:
-- resets: phandle to the dedicated reset line of the spdif input.
-
-Example on the A113 SoC:
-
-spdifin: audio-controller@400 {
- compatible = "amlogic,axg-spdifin";
- reg = <0x0 0x400 0x0 0x30>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
- <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
- clock-names = "pclk", "refclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
new file mode 100644
index 000000000000..a0bd7a5fb9b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG SPDIF Input
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,axg-spdifin
+ - items:
+ - enum:
+ - amlogic,g12a-spdifin
+ - amlogic,sm1-spdifin
+ - const: amlogic,axg-spdifin
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: SPDIF input reference clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: refclk
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+ - interrupts
+
+allOf:
+ - $ref: dai-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-spdifin
+ - amlogic,sm1-spdifin
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ audio-controller@400 {
+ compatible = "amlogic,axg-spdifin";
+ reg = <0x400 0x30>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+ <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+ clock-names = "pclk", "refclk";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 5/7] ASoC: dt-bindings: meson: convert axg spdif input to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg spdif input to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-spdifin.txt | 27 ------
.../bindings/sound/amlogic,axg-spdifin.yaml | 86 +++++++++++++++++++
2 files changed, 86 insertions(+), 27 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
deleted file mode 100644
index df92a4ecf288..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Amlogic Audio SPDIF Input
-
-Required properties:
-- compatible: 'amlogic,axg-spdifin' or
- 'amlogic,g12a-spdifin' or
- 'amlogic,sm1-spdifin'
-- interrupts: interrupt specifier for the spdif input.
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "refclk" : spdif input reference clock
-- #sound-dai-cells: must be 0.
-
-Optional property:
-- resets: phandle to the dedicated reset line of the spdif input.
-
-Example on the A113 SoC:
-
-spdifin: audio-controller@400 {
- compatible = "amlogic,axg-spdifin";
- reg = <0x0 0x400 0x0 0x30>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
- <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
- clock-names = "pclk", "refclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
new file mode 100644
index 000000000000..a0bd7a5fb9b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG SPDIF Input
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,axg-spdifin
+ - items:
+ - enum:
+ - amlogic,g12a-spdifin
+ - amlogic,sm1-spdifin
+ - const: amlogic,axg-spdifin
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: SPDIF input reference clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: refclk
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+ - interrupts
+
+allOf:
+ - $ref: dai-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-spdifin
+ - amlogic,sm1-spdifin
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ audio-controller@400 {
+ compatible = "amlogic,axg-spdifin";
+ reg = <0x400 0x30>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+ <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+ clock-names = "pclk", "refclk";
+ };
--
2.39.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 6/7] ASoC: dt-bindings: meson: convert axg spdif output to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 15:34 ` Jerome Brunet
-1 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg spdif output to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-spdifout.txt | 25 ------
.../bindings/sound/amlogic,axg-spdifout.yaml | 79 +++++++++++++++++++
2 files changed, 79 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
deleted file mode 100644
index 28381dd1f633..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Amlogic Audio SPDIF Output
-
-Required properties:
-- compatible: 'amlogic,axg-spdifout' or
- 'amlogic,g12a-spdifout' or
- 'amlogic,sm1-spdifout'
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "mclk" : master clock
-- #sound-dai-cells: must be 0.
-
-Optional property:
-- resets: phandle to the dedicated reset line of the spdif output.
-
-Example on the A113 SoC:
-
-spdifout: audio-controller@480 {
- compatible = "amlogic,axg-spdifout";
- reg = <0x0 0x480 0x0 0x50>;
- #sound-dai-cells = <0>;
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
- clock-names = "pclk", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
new file mode 100644
index 000000000000..15be8dae9398
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG SPDIF Output
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,axg-spdifout
+ - items:
+ - enum:
+ - amlogic,g12a-spdifout
+ - amlogic,sm1-spdifout
+ - const: amlogic,axg-spdifout
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: SPDIF output master clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: mclk
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: dai-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-spdifout
+ - amlogic,sm1-spdifout
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+
+ audio-controller@480 {
+ compatible = "amlogic,axg-spdifout";
+ reg = <0x480 0x50>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+ clock-names = "pclk", "mclk";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 6/7] ASoC: dt-bindings: meson: convert axg spdif output to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic, Jerome Brunet
Convert the DT binding documentation for the Amlogic axg spdif output to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-spdifout.txt | 25 ------
.../bindings/sound/amlogic,axg-spdifout.yaml | 79 +++++++++++++++++++
2 files changed, 79 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
deleted file mode 100644
index 28381dd1f633..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Amlogic Audio SPDIF Output
-
-Required properties:
-- compatible: 'amlogic,axg-spdifout' or
- 'amlogic,g12a-spdifout' or
- 'amlogic,sm1-spdifout'
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "mclk" : master clock
-- #sound-dai-cells: must be 0.
-
-Optional property:
-- resets: phandle to the dedicated reset line of the spdif output.
-
-Example on the A113 SoC:
-
-spdifout: audio-controller@480 {
- compatible = "amlogic,axg-spdifout";
- reg = <0x0 0x480 0x0 0x50>;
- #sound-dai-cells = <0>;
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
- clock-names = "pclk", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
new file mode 100644
index 000000000000..15be8dae9398
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG SPDIF Output
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,axg-spdifout
+ - items:
+ - enum:
+ - amlogic,g12a-spdifout
+ - amlogic,sm1-spdifout
+ - const: amlogic,axg-spdifout
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: SPDIF output master clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: mclk
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: dai-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-spdifout
+ - amlogic,sm1-spdifout
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+
+ audio-controller@480 {
+ compatible = "amlogic,axg-spdifout";
+ reg = <0x480 0x50>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+ clock-names = "pclk", "mclk";
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 6/7] ASoC: dt-bindings: meson: convert axg spdif output to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg spdif output to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-spdifout.txt | 25 ------
.../bindings/sound/amlogic,axg-spdifout.yaml | 79 +++++++++++++++++++
2 files changed, 79 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
deleted file mode 100644
index 28381dd1f633..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Amlogic Audio SPDIF Output
-
-Required properties:
-- compatible: 'amlogic,axg-spdifout' or
- 'amlogic,g12a-spdifout' or
- 'amlogic,sm1-spdifout'
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "pclk" : peripheral clock.
- * "mclk" : master clock
-- #sound-dai-cells: must be 0.
-
-Optional property:
-- resets: phandle to the dedicated reset line of the spdif output.
-
-Example on the A113 SoC:
-
-spdifout: audio-controller@480 {
- compatible = "amlogic,axg-spdifout";
- reg = <0x0 0x480 0x0 0x50>;
- #sound-dai-cells = <0>;
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
- clock-names = "pclk", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
new file mode 100644
index 000000000000..15be8dae9398
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG SPDIF Output
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,axg-spdifout
+ - items:
+ - enum:
+ - amlogic,g12a-spdifout
+ - amlogic,sm1-spdifout
+ - const: amlogic,axg-spdifout
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Peripheral clock
+ - description: SPDIF output master clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: mclk
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: dai-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-spdifout
+ - amlogic,sm1-spdifout
+ then:
+ required:
+ - resets
+
+ else:
+ properties:
+ resets: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-audio-clkc.h>
+
+ audio-controller@480 {
+ compatible = "amlogic,axg-spdifout";
+ reg = <0x480 0x50>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+ clock-names = "pclk", "mclk";
+ };
--
2.39.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 15:34 ` Jerome Brunet
-1 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg sound card to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
.../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
2 files changed, 183 insertions(+), 124 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
deleted file mode 100644
index 80b411296480..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-Amlogic AXG sound card:
-
-Required properties:
-
-- compatible: "amlogic,axg-sound-card"
-- model : User specified audio sound card name, one string
-
-Optional properties:
-
-- audio-aux-devs : List of phandles pointing to auxiliary devices
-- audio-widgets : Please refer to widgets.txt.
-- audio-routing : A list of the connections between audio components.
-
-Subnodes:
-
-- dai-link: Container for dai-link level properties and the CODEC
- sub-nodes. There should be at least one (and probably more)
- subnode of this type.
-
-Required dai-link properties:
-
-- sound-dai: phandle and port of the CPU DAI.
-
-Required TDM Backend dai-link properties:
-- dai-format : CPU/CODEC common audio format
-
-Optional TDM Backend dai-link properties:
-- dai-tdm-slot-rx-mask-{0,1,2,3}: Receive direction slot masks
-- dai-tdm-slot-tx-mask-{0,1,2,3}: Transmit direction slot masks
- When omitted, mask is assumed to have to no
- slots. A valid must have at one slot, so at
- least one these mask should be provided with
- an enabled slot.
-- dai-tdm-slot-num : Please refer to tdm-slot.txt.
- If omitted, slot number is set to accommodate the largest
- mask provided.
-- dai-tdm-slot-width : Please refer to tdm-slot.txt. default to 32 if omitted.
-- mclk-fs : Multiplication factor between stream rate and mclk
-
-Backend dai-link subnodes:
-
-- codec: dai-link representing backend links should have at least one subnode.
- One subnode for each codec of the dai-link.
- dai-link representing frontend links have no codec, therefore have no
- subnodes
-
-Required codec subnodes properties:
-
-- sound-dai: phandle and port of the CODEC DAI.
-
-Optional codec subnodes properties:
-
-- dai-tdm-slot-tx-mask : Please refer to tdm-slot.txt.
-- dai-tdm-slot-rx-mask : Please refer to tdm-slot.txt.
-
-Example:
-
-sound {
- compatible = "amlogic,axg-sound-card";
- model = "AXG-S420";
- audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
- audio-widgets = "Line", "Lineout",
- "Line", "Linein",
- "Speaker", "Speaker1 Left",
- "Speaker", "Speaker1 Right";
- "Speaker", "Speaker2 Left",
- "Speaker", "Speaker2 Right";
- audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "TDM_C Playback", "TDMOUT_C OUT",
- "TDMIN_A IN 2", "TDM_C Capture",
- "TDMIN_A IN 5", "TDM_C Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "Lineout", "Lineout AOUTL",
- "Lineout", "Lineout AOUTR",
- "Speaker1 Left", "SPK1 OUT_A",
- "Speaker2 Left", "SPK2 OUT_A",
- "Speaker1 Right", "SPK1 OUT_B",
- "Speaker2 Right", "SPK2 OUT_B",
- "Linein AINL", "Linein",
- "Linein AINR", "Linein";
-
- dai-link@0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link@1 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link@2 {
- sound-dai = <&tdmif_c>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- dai-tdm-slot-rx-mask-1 = <1 1>;
- mclk-fs = <256>;
-
- codec@0 {
- sound-dai = <&lineout>;
- };
-
- codec@1 {
- sound-dai = <&speaker_amp1>;
- };
-
- codec@2 {
- sound-dai = <&speaker_amp2>;
- };
-
- codec@3 {
- sound-dai = <&linein>;
- };
-
- };
-
- dai-link@3 {
- sound-dai = <&spdifout>;
-
- codec {
- sound-dai = <&spdif_dit>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
new file mode 100644
index 000000000000..b7459fad0e7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG sound card
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ const: amlogic,axg-sound-card
+
+ audio-aux-devs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: list of auxiliary devices
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+
+ audio-widgets:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list off component DAPM widget. Each entry is a pair of strings,
+ the first being the widget type, the second being the widget name
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User specified audio sound card name
+
+patternProperties:
+ "^dai-link-[0-9]+$":
+ type: object
+ additionalProperties: false
+ description: |
+ Container for dai-link level properties and the CODEC sub-nodes.
+ There should be at least one (and probably more) subnode of this type
+
+ properties:
+ dai-format:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ i2s, left-j, dsp_a ]
+
+ dai-tdm-slot-num:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Number of slots in use. If omitted, slot number is set to
+ accommodate the largest mask provided.
+ maximum: 32
+
+ dai-tdm-slot-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width in bits for each slot
+ enum: [ 8, 16, 20, 24, 32 ]
+ default: 32
+
+ mclk-fs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Multiplication factor between the frame rate and master clock
+ rate
+
+ sound-dai:
+ maxItems: 1
+ description: phandle of the CPU DAI
+
+ patternProperties:
+ "^dai-tdm-slot-(t|r)x-mask-[0-3]$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description: |
+ Transmit and receive cpu slot masks of each TDM lane
+ When omitted, mask is assumed to have to no slots. A valid
+ interface must have at least one slot, so at least one these
+ mask should be provided with an enabled slot.
+
+ "^codec(-[0-9]+)?$":
+ type: object
+ additionalProperties: false
+ description: |
+ dai-link representing backend links should have at least one subnode.
+ One subnode for each codec of the dai-link. dai-link representing
+ frontend links have no codec, therefore have no subnodes
+
+ properties:
+ sound-dai:
+ maxItems: 1
+ description: phandle of the codec DAI
+
+ patternProperties:
+ "^dai-tdm-slot-(t|r)x-mask$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description: Transmit and receive codec slot masks
+
+ required:
+ - sound-dai
+
+ required:
+ - sound-dai
+
+required:
+ - model
+ - dai-link-0
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "AXG-S420";
+ audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
+ audio-widgets = "Line", "Lineout",
+ "Line", "Linein",
+ "Speaker", "Speaker1 Left",
+ "Speaker", "Speaker1 Right",
+ "Speaker", "Speaker2 Left",
+ "Speaker", "Speaker2 Right";
+ audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "Lineout", "Lineout AOUTL",
+ "Lineout", "Lineout AOUTR",
+ "Speaker1 Left", "SPK1 OUT_A",
+ "Speaker2 Left", "SPK2 OUT_A",
+ "Speaker1 Right", "SPK1 OUT_B",
+ "Speaker2 Right", "SPK2 OUT_B",
+ "Linein AINL", "Linein",
+ "Linein AINR", "Linein";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ dai-tdm-slot-rx-mask-1 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&lineout>;
+ };
+
+ codec-1 {
+ sound-dai = <&speaker_amp1>;
+ };
+
+ codec-2 {
+ sound-dai = <&speaker_amp2>;
+ };
+
+ codec-3 {
+ sound-dai = <&linein>;
+ };
+ };
+
+ dai-link-3 {
+ sound-dai = <&spdifout>;
+
+ codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic, Jerome Brunet
Convert the DT binding documentation for the Amlogic axg sound card to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
.../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
2 files changed, 183 insertions(+), 124 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
deleted file mode 100644
index 80b411296480..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-Amlogic AXG sound card:
-
-Required properties:
-
-- compatible: "amlogic,axg-sound-card"
-- model : User specified audio sound card name, one string
-
-Optional properties:
-
-- audio-aux-devs : List of phandles pointing to auxiliary devices
-- audio-widgets : Please refer to widgets.txt.
-- audio-routing : A list of the connections between audio components.
-
-Subnodes:
-
-- dai-link: Container for dai-link level properties and the CODEC
- sub-nodes. There should be at least one (and probably more)
- subnode of this type.
-
-Required dai-link properties:
-
-- sound-dai: phandle and port of the CPU DAI.
-
-Required TDM Backend dai-link properties:
-- dai-format : CPU/CODEC common audio format
-
-Optional TDM Backend dai-link properties:
-- dai-tdm-slot-rx-mask-{0,1,2,3}: Receive direction slot masks
-- dai-tdm-slot-tx-mask-{0,1,2,3}: Transmit direction slot masks
- When omitted, mask is assumed to have to no
- slots. A valid must have at one slot, so at
- least one these mask should be provided with
- an enabled slot.
-- dai-tdm-slot-num : Please refer to tdm-slot.txt.
- If omitted, slot number is set to accommodate the largest
- mask provided.
-- dai-tdm-slot-width : Please refer to tdm-slot.txt. default to 32 if omitted.
-- mclk-fs : Multiplication factor between stream rate and mclk
-
-Backend dai-link subnodes:
-
-- codec: dai-link representing backend links should have at least one subnode.
- One subnode for each codec of the dai-link.
- dai-link representing frontend links have no codec, therefore have no
- subnodes
-
-Required codec subnodes properties:
-
-- sound-dai: phandle and port of the CODEC DAI.
-
-Optional codec subnodes properties:
-
-- dai-tdm-slot-tx-mask : Please refer to tdm-slot.txt.
-- dai-tdm-slot-rx-mask : Please refer to tdm-slot.txt.
-
-Example:
-
-sound {
- compatible = "amlogic,axg-sound-card";
- model = "AXG-S420";
- audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
- audio-widgets = "Line", "Lineout",
- "Line", "Linein",
- "Speaker", "Speaker1 Left",
- "Speaker", "Speaker1 Right";
- "Speaker", "Speaker2 Left",
- "Speaker", "Speaker2 Right";
- audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "TDM_C Playback", "TDMOUT_C OUT",
- "TDMIN_A IN 2", "TDM_C Capture",
- "TDMIN_A IN 5", "TDM_C Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "Lineout", "Lineout AOUTL",
- "Lineout", "Lineout AOUTR",
- "Speaker1 Left", "SPK1 OUT_A",
- "Speaker2 Left", "SPK2 OUT_A",
- "Speaker1 Right", "SPK1 OUT_B",
- "Speaker2 Right", "SPK2 OUT_B",
- "Linein AINL", "Linein",
- "Linein AINR", "Linein";
-
- dai-link@0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link@1 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link@2 {
- sound-dai = <&tdmif_c>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- dai-tdm-slot-rx-mask-1 = <1 1>;
- mclk-fs = <256>;
-
- codec@0 {
- sound-dai = <&lineout>;
- };
-
- codec@1 {
- sound-dai = <&speaker_amp1>;
- };
-
- codec@2 {
- sound-dai = <&speaker_amp2>;
- };
-
- codec@3 {
- sound-dai = <&linein>;
- };
-
- };
-
- dai-link@3 {
- sound-dai = <&spdifout>;
-
- codec {
- sound-dai = <&spdif_dit>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
new file mode 100644
index 000000000000..b7459fad0e7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG sound card
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ const: amlogic,axg-sound-card
+
+ audio-aux-devs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: list of auxiliary devices
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+
+ audio-widgets:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list off component DAPM widget. Each entry is a pair of strings,
+ the first being the widget type, the second being the widget name
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User specified audio sound card name
+
+patternProperties:
+ "^dai-link-[0-9]+$":
+ type: object
+ additionalProperties: false
+ description: |
+ Container for dai-link level properties and the CODEC sub-nodes.
+ There should be at least one (and probably more) subnode of this type
+
+ properties:
+ dai-format:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ i2s, left-j, dsp_a ]
+
+ dai-tdm-slot-num:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Number of slots in use. If omitted, slot number is set to
+ accommodate the largest mask provided.
+ maximum: 32
+
+ dai-tdm-slot-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width in bits for each slot
+ enum: [ 8, 16, 20, 24, 32 ]
+ default: 32
+
+ mclk-fs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Multiplication factor between the frame rate and master clock
+ rate
+
+ sound-dai:
+ maxItems: 1
+ description: phandle of the CPU DAI
+
+ patternProperties:
+ "^dai-tdm-slot-(t|r)x-mask-[0-3]$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description: |
+ Transmit and receive cpu slot masks of each TDM lane
+ When omitted, mask is assumed to have to no slots. A valid
+ interface must have at least one slot, so at least one these
+ mask should be provided with an enabled slot.
+
+ "^codec(-[0-9]+)?$":
+ type: object
+ additionalProperties: false
+ description: |
+ dai-link representing backend links should have at least one subnode.
+ One subnode for each codec of the dai-link. dai-link representing
+ frontend links have no codec, therefore have no subnodes
+
+ properties:
+ sound-dai:
+ maxItems: 1
+ description: phandle of the codec DAI
+
+ patternProperties:
+ "^dai-tdm-slot-(t|r)x-mask$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description: Transmit and receive codec slot masks
+
+ required:
+ - sound-dai
+
+ required:
+ - sound-dai
+
+required:
+ - model
+ - dai-link-0
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "AXG-S420";
+ audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
+ audio-widgets = "Line", "Lineout",
+ "Line", "Linein",
+ "Speaker", "Speaker1 Left",
+ "Speaker", "Speaker1 Right",
+ "Speaker", "Speaker2 Left",
+ "Speaker", "Speaker2 Right";
+ audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "Lineout", "Lineout AOUTL",
+ "Lineout", "Lineout AOUTR",
+ "Speaker1 Left", "SPK1 OUT_A",
+ "Speaker2 Left", "SPK2 OUT_A",
+ "Speaker1 Right", "SPK1 OUT_B",
+ "Speaker2 Right", "SPK2 OUT_B",
+ "Linein AINL", "Linein",
+ "Linein AINR", "Linein";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ dai-tdm-slot-rx-mask-1 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&lineout>;
+ };
+
+ codec-1 {
+ sound-dai = <&speaker_amp1>;
+ };
+
+ codec-2 {
+ sound-dai = <&speaker_amp2>;
+ };
+
+ codec-3 {
+ sound-dai = <&linein>;
+ };
+ };
+
+ dai-link-3 {
+ sound-dai = <&spdifout>;
+
+ codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+ };
--
2.39.0
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
@ 2023-02-06 15:34 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-06 15:34 UTC (permalink / raw)
To: Mark Brown, alsa-devel, devicetree
Cc: Jerome Brunet, linux-amlogic, Kevin Hilman, Neil Armstrong,
Rob Herring, Krzysztof Kozlowski, linux-kernel
Convert the DT binding documentation for the Amlogic axg sound card to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
.../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
2 files changed, 183 insertions(+), 124 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
deleted file mode 100644
index 80b411296480..000000000000
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-Amlogic AXG sound card:
-
-Required properties:
-
-- compatible: "amlogic,axg-sound-card"
-- model : User specified audio sound card name, one string
-
-Optional properties:
-
-- audio-aux-devs : List of phandles pointing to auxiliary devices
-- audio-widgets : Please refer to widgets.txt.
-- audio-routing : A list of the connections between audio components.
-
-Subnodes:
-
-- dai-link: Container for dai-link level properties and the CODEC
- sub-nodes. There should be at least one (and probably more)
- subnode of this type.
-
-Required dai-link properties:
-
-- sound-dai: phandle and port of the CPU DAI.
-
-Required TDM Backend dai-link properties:
-- dai-format : CPU/CODEC common audio format
-
-Optional TDM Backend dai-link properties:
-- dai-tdm-slot-rx-mask-{0,1,2,3}: Receive direction slot masks
-- dai-tdm-slot-tx-mask-{0,1,2,3}: Transmit direction slot masks
- When omitted, mask is assumed to have to no
- slots. A valid must have at one slot, so at
- least one these mask should be provided with
- an enabled slot.
-- dai-tdm-slot-num : Please refer to tdm-slot.txt.
- If omitted, slot number is set to accommodate the largest
- mask provided.
-- dai-tdm-slot-width : Please refer to tdm-slot.txt. default to 32 if omitted.
-- mclk-fs : Multiplication factor between stream rate and mclk
-
-Backend dai-link subnodes:
-
-- codec: dai-link representing backend links should have at least one subnode.
- One subnode for each codec of the dai-link.
- dai-link representing frontend links have no codec, therefore have no
- subnodes
-
-Required codec subnodes properties:
-
-- sound-dai: phandle and port of the CODEC DAI.
-
-Optional codec subnodes properties:
-
-- dai-tdm-slot-tx-mask : Please refer to tdm-slot.txt.
-- dai-tdm-slot-rx-mask : Please refer to tdm-slot.txt.
-
-Example:
-
-sound {
- compatible = "amlogic,axg-sound-card";
- model = "AXG-S420";
- audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
- audio-widgets = "Line", "Lineout",
- "Line", "Linein",
- "Speaker", "Speaker1 Left",
- "Speaker", "Speaker1 Right";
- "Speaker", "Speaker2 Left",
- "Speaker", "Speaker2 Right";
- audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "TDM_C Playback", "TDMOUT_C OUT",
- "TDMIN_A IN 2", "TDM_C Capture",
- "TDMIN_A IN 5", "TDM_C Loopback",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "Lineout", "Lineout AOUTL",
- "Lineout", "Lineout AOUTR",
- "Speaker1 Left", "SPK1 OUT_A",
- "Speaker2 Left", "SPK2 OUT_A",
- "Speaker1 Right", "SPK1 OUT_B",
- "Speaker2 Right", "SPK2 OUT_B",
- "Linein AINL", "Linein",
- "Linein AINR", "Linein";
-
- dai-link@0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link@1 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link@2 {
- sound-dai = <&tdmif_c>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- dai-tdm-slot-rx-mask-1 = <1 1>;
- mclk-fs = <256>;
-
- codec@0 {
- sound-dai = <&lineout>;
- };
-
- codec@1 {
- sound-dai = <&speaker_amp1>;
- };
-
- codec@2 {
- sound-dai = <&speaker_amp2>;
- };
-
- codec@3 {
- sound-dai = <&linein>;
- };
-
- };
-
- dai-link@3 {
- sound-dai = <&spdifout>;
-
- codec {
- sound-dai = <&spdif_dit>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
new file mode 100644
index 000000000000..b7459fad0e7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG sound card
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+ compatible:
+ const: amlogic,axg-sound-card
+
+ audio-aux-devs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: list of auxiliary devices
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+
+ audio-widgets:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list off component DAPM widget. Each entry is a pair of strings,
+ the first being the widget type, the second being the widget name
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User specified audio sound card name
+
+patternProperties:
+ "^dai-link-[0-9]+$":
+ type: object
+ additionalProperties: false
+ description: |
+ Container for dai-link level properties and the CODEC sub-nodes.
+ There should be at least one (and probably more) subnode of this type
+
+ properties:
+ dai-format:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ i2s, left-j, dsp_a ]
+
+ dai-tdm-slot-num:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Number of slots in use. If omitted, slot number is set to
+ accommodate the largest mask provided.
+ maximum: 32
+
+ dai-tdm-slot-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width in bits for each slot
+ enum: [ 8, 16, 20, 24, 32 ]
+ default: 32
+
+ mclk-fs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Multiplication factor between the frame rate and master clock
+ rate
+
+ sound-dai:
+ maxItems: 1
+ description: phandle of the CPU DAI
+
+ patternProperties:
+ "^dai-tdm-slot-(t|r)x-mask-[0-3]$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description: |
+ Transmit and receive cpu slot masks of each TDM lane
+ When omitted, mask is assumed to have to no slots. A valid
+ interface must have at least one slot, so at least one these
+ mask should be provided with an enabled slot.
+
+ "^codec(-[0-9]+)?$":
+ type: object
+ additionalProperties: false
+ description: |
+ dai-link representing backend links should have at least one subnode.
+ One subnode for each codec of the dai-link. dai-link representing
+ frontend links have no codec, therefore have no subnodes
+
+ properties:
+ sound-dai:
+ maxItems: 1
+ description: phandle of the codec DAI
+
+ patternProperties:
+ "^dai-tdm-slot-(t|r)x-mask$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description: Transmit and receive codec slot masks
+
+ required:
+ - sound-dai
+
+ required:
+ - sound-dai
+
+required:
+ - model
+ - dai-link-0
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "AXG-S420";
+ audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
+ audio-widgets = "Line", "Lineout",
+ "Line", "Linein",
+ "Speaker", "Speaker1 Left",
+ "Speaker", "Speaker1 Right",
+ "Speaker", "Speaker2 Left",
+ "Speaker", "Speaker2 Right";
+ audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "Lineout", "Lineout AOUTL",
+ "Lineout", "Lineout AOUTR",
+ "Speaker1 Left", "SPK1 OUT_A",
+ "Speaker2 Left", "SPK2 OUT_A",
+ "Speaker1 Right", "SPK1 OUT_B",
+ "Speaker2 Right", "SPK2 OUT_B",
+ "Linein AINL", "Linein",
+ "Linein AINR", "Linein";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ dai-tdm-slot-rx-mask-1 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&lineout>;
+ };
+
+ codec-1 {
+ sound-dai = <&speaker_amp1>;
+ };
+
+ codec-2 {
+ sound-dai = <&speaker_amp2>;
+ };
+
+ codec-3 {
+ sound-dai = <&linein>;
+ };
+ };
+
+ dai-link-3 {
+ sound-dai = <&spdifout>;
+
+ codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+ };
--
2.39.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 62+ messages in thread
* Re: [PATCH v2 1/7] ASoC: dt-bindings: meson: convert axg tdm interface to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 19:10 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:10 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic tdm interface to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 1/7] ASoC: dt-bindings: meson: convert axg tdm interface to schema
@ 2023-02-06 19:10 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:10 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic tdm interface to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 1/7] ASoC: dt-bindings: meson: convert axg tdm interface to schema
@ 2023-02-06 19:10 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:10 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic tdm interface to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 19:12 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:12 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic tdm formatters to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-06 19:12 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:12 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic tdm formatters to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-06 19:12 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:12 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic tdm formatters to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 3/7] ASoC: dt-bindings: meson: convert axg pdm to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 19:13 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:13 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg PDM device to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 3/7] ASoC: dt-bindings: meson: convert axg pdm to schema
@ 2023-02-06 19:13 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:13 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg PDM device to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 3/7] ASoC: dt-bindings: meson: convert axg pdm to schema
@ 2023-02-06 19:13 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:13 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg PDM device to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 4/7] ASoC: dt-bindings: meson: convert axg fifo to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 19:14 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:14 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg audio FIFOs to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../bindings/sound/amlogic,axg-fifo.txt | 34 ------
> .../bindings/sound/amlogic,axg-fifo.yaml | 112 ++++++++++++++++++
> 2 files changed, 112 insertions(+), 34 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 4/7] ASoC: dt-bindings: meson: convert axg fifo to schema
@ 2023-02-06 19:14 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:14 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg audio FIFOs to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../bindings/sound/amlogic,axg-fifo.txt | 34 ------
> .../bindings/sound/amlogic,axg-fifo.yaml | 112 ++++++++++++++++++
> 2 files changed, 112 insertions(+), 34 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 4/7] ASoC: dt-bindings: meson: convert axg fifo to schema
@ 2023-02-06 19:14 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:14 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg audio FIFOs to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../bindings/sound/amlogic,axg-fifo.txt | 34 ------
> .../bindings/sound/amlogic,axg-fifo.yaml | 112 ++++++++++++++++++
> 2 files changed, 112 insertions(+), 34 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 5/7] ASoC: dt-bindings: meson: convert axg spdif input to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 19:15 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:15 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg spdif input to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 5/7] ASoC: dt-bindings: meson: convert axg spdif input to schema
@ 2023-02-06 19:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:15 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg spdif input to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 5/7] ASoC: dt-bindings: meson: convert axg spdif input to schema
@ 2023-02-06 19:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:15 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg spdif input to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 6/7] ASoC: dt-bindings: meson: convert axg spdif output to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 19:16 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:16 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg spdif output to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../bindings/sound/amlogic,axg-spdifout.txt | 25 ------
> .../bindings/sound/amlogic,axg-spdifout.yaml | 79 +++++++++++++++++++
> 2 files changed, 79 insertions(+), 25 deletions(-)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 6/7] ASoC: dt-bindings: meson: convert axg spdif output to schema
@ 2023-02-06 19:16 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:16 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg spdif output to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../bindings/sound/amlogic,axg-spdifout.txt | 25 ------
> .../bindings/sound/amlogic,axg-spdifout.yaml | 79 +++++++++++++++++++
> 2 files changed, 79 insertions(+), 25 deletions(-)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 6/7] ASoC: dt-bindings: meson: convert axg spdif output to schema
@ 2023-02-06 19:16 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:16 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg spdif output to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../bindings/sound/amlogic,axg-spdifout.txt | 25 ------
> .../bindings/sound/amlogic,axg-spdifout.yaml | 79 +++++++++++++++++++
> 2 files changed, 79 insertions(+), 25 deletions(-)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 19:21 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:21 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg sound card to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
> .../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
> 2 files changed, 183 insertions(+), 124 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
>
Thank you for your patch. There is something to discuss/improve.
> -};
> diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
> new file mode 100644
> index 000000000000..b7459fad0e7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
> @@ -0,0 +1,183 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic AXG sound card
> +
> +maintainers:
> + - Jerome Brunet <jbrunet@baylibre.com>
> +
> +properties:
> + compatible:
> + const: amlogic,axg-sound-card
> +
> + audio-aux-devs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: list of auxiliary devices
> +
> + audio-routing:
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> + description: |
You still have everywhere | which should be removed. Here and in almost
every other description when no special formatting is needed.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
@ 2023-02-06 19:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:21 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg sound card to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
> .../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
> 2 files changed, 183 insertions(+), 124 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
>
Thank you for your patch. There is something to discuss/improve.
> -};
> diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
> new file mode 100644
> index 000000000000..b7459fad0e7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
> @@ -0,0 +1,183 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic AXG sound card
> +
> +maintainers:
> + - Jerome Brunet <jbrunet@baylibre.com>
> +
> +properties:
> + compatible:
> + const: amlogic,axg-sound-card
> +
> + audio-aux-devs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: list of auxiliary devices
> +
> + audio-routing:
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> + description: |
You still have everywhere | which should be removed. Here and in almost
every other description when no special formatting is needed.
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
@ 2023-02-06 19:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-06 19:21 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic
On 06/02/2023 16:34, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic axg sound card to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../bindings/sound/amlogic,axg-sound-card.txt | 124 ------------
> .../sound/amlogic,axg-sound-card.yaml | 183 ++++++++++++++++++
> 2 files changed, 183 insertions(+), 124 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
>
Thank you for your patch. There is something to discuss/improve.
> -};
> diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
> new file mode 100644
> index 000000000000..b7459fad0e7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
> @@ -0,0 +1,183 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic AXG sound card
> +
> +maintainers:
> + - Jerome Brunet <jbrunet@baylibre.com>
> +
> +properties:
> + compatible:
> + const: amlogic,axg-sound-card
> +
> + audio-aux-devs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: list of auxiliary devices
> +
> + audio-routing:
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> + description: |
You still have everywhere | which should be removed. Here and in almost
every other description when no special formatting is needed.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
2023-02-06 15:34 ` Jerome Brunet
(?)
@ 2023-02-06 19:59 ` Rob Herring
-1 siblings, 0 replies; 62+ messages in thread
From: Rob Herring @ 2023-02-06 19:59 UTC (permalink / raw)
To: Jerome Brunet
Cc: Mark Brown, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Kevin Hilman, linux-kernel, alsa-devel, devicetree,
linux-amlogic
On Mon, 06 Feb 2023 16:34:44 +0100, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic tdm formatters to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../sound/amlogic,axg-tdm-formatters.txt | 36 --------
> .../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
> 2 files changed, 88 insertions(+), 36 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/sound/component-common.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.example.dtb: audio-controller@500: False schema does not allow {'compatible': ['amlogic,g12a-tdmout'], 'reg': [[1280, 64]], 'resets': [[4294967295, 12]], 'clocks': [[4294967295, 35], [4294967295, 127], [4294967295, 120], [4294967295, 134], [4294967295, 134]], 'clock-names': ['pclk', 'sclk', 'sclk_sel', 'lrclk', 'lrclk_sel'], '$nodename': ['audio-controller@500']}
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230206153449.596326-3-jbrunet@baylibre.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-06 19:59 ` Rob Herring
0 siblings, 0 replies; 62+ messages in thread
From: Rob Herring @ 2023-02-06 19:59 UTC (permalink / raw)
To: Jerome Brunet
Cc: Mark Brown, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Kevin Hilman, linux-kernel, alsa-devel, devicetree,
linux-amlogic
On Mon, 06 Feb 2023 16:34:44 +0100, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic tdm formatters to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../sound/amlogic,axg-tdm-formatters.txt | 36 --------
> .../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
> 2 files changed, 88 insertions(+), 36 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/sound/component-common.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.example.dtb: audio-controller@500: False schema does not allow {'compatible': ['amlogic,g12a-tdmout'], 'reg': [[1280, 64]], 'resets': [[4294967295, 12]], 'clocks': [[4294967295, 35], [4294967295, 127], [4294967295, 120], [4294967295, 134], [4294967295, 134]], 'clock-names': ['pclk', 'sclk', 'sclk_sel', 'lrclk', 'lrclk_sel'], '$nodename': ['audio-controller@500']}
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230206153449.596326-3-jbrunet@baylibre.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-06 19:59 ` Rob Herring
0 siblings, 0 replies; 62+ messages in thread
From: Rob Herring @ 2023-02-06 19:59 UTC (permalink / raw)
To: Jerome Brunet
Cc: Neil Armstrong, alsa-devel, devicetree, Kevin Hilman,
linux-kernel, Rob Herring, Mark Brown, Krzysztof Kozlowski,
linux-amlogic
On Mon, 06 Feb 2023 16:34:44 +0100, Jerome Brunet wrote:
> Convert the DT binding documentation for the Amlogic tdm formatters to
> schema.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> .../sound/amlogic,axg-tdm-formatters.txt | 36 --------
> .../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
> 2 files changed, 88 insertions(+), 36 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/sound/component-common.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.example.dtb: audio-controller@500: False schema does not allow {'compatible': ['amlogic,g12a-tdmout'], 'reg': [[1280, 64]], 'resets': [[4294967295, 12]], 'clocks': [[4294967295, 35], [4294967295, 127], [4294967295, 120], [4294967295, 134], [4294967295, 134]], 'clock-names': ['pclk', 'sclk', 'sclk_sel', 'lrclk', 'lrclk_sel'], '$nodename': ['audio-controller@500']}
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230206153449.596326-3-jbrunet@baylibre.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
2023-02-06 19:21 ` Krzysztof Kozlowski
(?)
@ 2023-02-07 9:25 ` Jerome Brunet
-1 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-07 9:25 UTC (permalink / raw)
To: Krzysztof Kozlowski, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On Mon 06 Feb 2023 at 20:21, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>> +
>> + audio-routing:
>> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>> + description: |
>
> You still have everywhere | which should be removed. Here and in almost
> every other description when no special formatting is needed.
I'm sorry if I misunderstood your comment. I thought the problem was
with the '-' of '|-', which I removed here.
Should I use '>' for the YAML multiline format instead ?
>
>
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
@ 2023-02-07 9:25 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-07 9:25 UTC (permalink / raw)
To: Krzysztof Kozlowski, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On Mon 06 Feb 2023 at 20:21, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>> +
>> + audio-routing:
>> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>> + description: |
>
> You still have everywhere | which should be removed. Here and in almost
> every other description when no special formatting is needed.
I'm sorry if I misunderstood your comment. I thought the problem was
with the '-' of '|-', which I removed here.
Should I use '>' for the YAML multiline format instead ?
>
>
>
> Best regards,
> Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
@ 2023-02-07 9:25 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-07 9:25 UTC (permalink / raw)
To: Krzysztof Kozlowski, Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic
On Mon 06 Feb 2023 at 20:21, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>> +
>> + audio-routing:
>> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>> + description: |
>
> You still have everywhere | which should be removed. Here and in almost
> every other description when no special formatting is needed.
I'm sorry if I misunderstood your comment. I thought the problem was
with the '-' of '|-', which I removed here.
Should I use '>' for the YAML multiline format instead ?
>
>
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
2023-02-06 19:59 ` Rob Herring
(?)
@ 2023-02-07 9:29 ` Jerome Brunet
-1 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-07 9:29 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Brown, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Kevin Hilman, linux-kernel, alsa-devel, devicetree,
linux-amlogic
On Mon 06 Feb 2023 at 13:59, Rob Herring <robh@kernel.org> wrote:
> On Mon, 06 Feb 2023 16:34:44 +0100, Jerome Brunet wrote:
>> Convert the DT binding documentation for the Amlogic tdm formatters to
>> schema.
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> ---
>> .../sound/amlogic,axg-tdm-formatters.txt | 36 --------
>> .../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
>> 2 files changed, 88 insertions(+), 36 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
>>
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> ./Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml:
> Unable to find schema file matching $id:
> http://devicetree.org/schemas/sound/component-common.yaml
This is a false error because the bot does not have the patch applied
by Mark from v1 here [0]
[0]: https://lore.kernel.org/all/167543616131.928818.17902040818579023398.b4-ty@kernel.org/
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.example.dtb:
> audio-controller@500: False schema does not allow {'compatible':
> ['amlogic,g12a-tdmout'], 'reg': [[1280, 64]], 'resets': [[4294967295, 12]],
> 'clocks': [[4294967295, 35], [4294967295, 127], [4294967295, 120],
> [4294967295, 134], [4294967295, 134]], 'clock-names': ['pclk', 'sclk',
> 'sclk_sel', 'lrclk', 'lrclk_sel'], '$nodename': ['audio-controller@500']}
> From schema:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230206153449.596326-3-jbrunet@baylibre.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-07 9:29 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-07 9:29 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Brown, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Kevin Hilman, linux-kernel, alsa-devel, devicetree,
linux-amlogic
On Mon 06 Feb 2023 at 13:59, Rob Herring <robh@kernel.org> wrote:
> On Mon, 06 Feb 2023 16:34:44 +0100, Jerome Brunet wrote:
>> Convert the DT binding documentation for the Amlogic tdm formatters to
>> schema.
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> ---
>> .../sound/amlogic,axg-tdm-formatters.txt | 36 --------
>> .../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
>> 2 files changed, 88 insertions(+), 36 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
>>
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> ./Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml:
> Unable to find schema file matching $id:
> http://devicetree.org/schemas/sound/component-common.yaml
This is a false error because the bot does not have the patch applied
by Mark from v1 here [0]
[0]: https://lore.kernel.org/all/167543616131.928818.17902040818579023398.b4-ty@kernel.org/
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.example.dtb:
> audio-controller@500: False schema does not allow {'compatible':
> ['amlogic,g12a-tdmout'], 'reg': [[1280, 64]], 'resets': [[4294967295, 12]],
> 'clocks': [[4294967295, 35], [4294967295, 127], [4294967295, 120],
> [4294967295, 134], [4294967295, 134]], 'clock-names': ['pclk', 'sclk',
> 'sclk_sel', 'lrclk', 'lrclk_sel'], '$nodename': ['audio-controller@500']}
> From schema:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230206153449.596326-3-jbrunet@baylibre.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-07 9:29 ` Jerome Brunet
0 siblings, 0 replies; 62+ messages in thread
From: Jerome Brunet @ 2023-02-07 9:29 UTC (permalink / raw)
To: Rob Herring
Cc: Neil Armstrong, alsa-devel, devicetree, Kevin Hilman,
linux-kernel, Rob Herring, Mark Brown, Krzysztof Kozlowski,
linux-amlogic
On Mon 06 Feb 2023 at 13:59, Rob Herring <robh@kernel.org> wrote:
> On Mon, 06 Feb 2023 16:34:44 +0100, Jerome Brunet wrote:
>> Convert the DT binding documentation for the Amlogic tdm formatters to
>> schema.
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> ---
>> .../sound/amlogic,axg-tdm-formatters.txt | 36 --------
>> .../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
>> 2 files changed, 88 insertions(+), 36 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
>>
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> ./Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml:
> Unable to find schema file matching $id:
> http://devicetree.org/schemas/sound/component-common.yaml
This is a false error because the bot does not have the patch applied
by Mark from v1 here [0]
[0]: https://lore.kernel.org/all/167543616131.928818.17902040818579023398.b4-ty@kernel.org/
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.example.dtb:
> audio-controller@500: False schema does not allow {'compatible':
> ['amlogic,g12a-tdmout'], 'reg': [[1280, 64]], 'resets': [[4294967295, 12]],
> 'clocks': [[4294967295, 35], [4294967295, 127], [4294967295, 120],
> [4294967295, 134], [4294967295, 134]], 'clock-names': ['pclk', 'sclk',
> 'sclk_sel', 'lrclk', 'lrclk_sel'], '$nodename': ['audio-controller@500']}
> From schema:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230206153449.596326-3-jbrunet@baylibre.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
2023-02-07 9:25 ` Jerome Brunet
(?)
@ 2023-02-07 12:30 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-07 12:30 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 07/02/2023 10:25, Jerome Brunet wrote:
>
> On Mon 06 Feb 2023 at 20:21, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>
>>> +
>>> + audio-routing:
>>> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>>> + description: |
>>
>> You still have everywhere | which should be removed. Here and in almost
>> every other description when no special formatting is needed.
>
> I'm sorry if I misunderstood your comment. I thought the problem was
> with the '-' of '|-', which I removed here.
>
> Should I use '>' for the YAML multiline format instead ?
I asked to remove "|-". Don't add any other character - why do you need
it? Multiline descriptions don't need block scalar headers unless you
want to preserve some format.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
@ 2023-02-07 12:30 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-07 12:30 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: Neil Armstrong, Kevin Hilman, linux-kernel, Rob Herring,
Krzysztof Kozlowski, linux-amlogic
On 07/02/2023 10:25, Jerome Brunet wrote:
>
> On Mon 06 Feb 2023 at 20:21, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>
>>> +
>>> + audio-routing:
>>> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>>> + description: |
>>
>> You still have everywhere | which should be removed. Here and in almost
>> every other description when no special formatting is needed.
>
> I'm sorry if I misunderstood your comment. I thought the problem was
> with the '-' of '|-', which I removed here.
>
> Should I use '>' for the YAML multiline format instead ?
I asked to remove "|-". Don't add any other character - why do you need
it? Multiline descriptions don't need block scalar headers unless you
want to preserve some format.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control to schema
@ 2023-02-07 12:30 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-07 12:30 UTC (permalink / raw)
To: Jerome Brunet, Mark Brown, alsa-devel, devicetree
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On 07/02/2023 10:25, Jerome Brunet wrote:
>
> On Mon 06 Feb 2023 at 20:21, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>
>>> +
>>> + audio-routing:
>>> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>>> + description: |
>>
>> You still have everywhere | which should be removed. Here and in almost
>> every other description when no special formatting is needed.
>
> I'm sorry if I misunderstood your comment. I thought the problem was
> with the '-' of '|-', which I removed here.
>
> Should I use '>' for the YAML multiline format instead ?
I asked to remove "|-". Don't add any other character - why do you need
it? Multiline descriptions don't need block scalar headers unless you
want to preserve some format.
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
2023-02-07 9:29 ` Jerome Brunet
(?)
@ 2023-02-07 13:50 ` Rob Herring
-1 siblings, 0 replies; 62+ messages in thread
From: Rob Herring @ 2023-02-07 13:50 UTC (permalink / raw)
To: Jerome Brunet
Cc: Mark Brown, Neil Armstrong, Krzysztof Kozlowski, Kevin Hilman,
linux-kernel, alsa-devel, devicetree, linux-amlogic
On Tue, Feb 7, 2023 at 3:33 AM Jerome Brunet <jbrunet@baylibre.com> wrote:
>
>
> On Mon 06 Feb 2023 at 13:59, Rob Herring <robh@kernel.org> wrote:
>
> > On Mon, 06 Feb 2023 16:34:44 +0100, Jerome Brunet wrote:
> >> Convert the DT binding documentation for the Amlogic tdm formatters to
> >> schema.
> >>
> >> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> >> ---
> >> .../sound/amlogic,axg-tdm-formatters.txt | 36 --------
> >> .../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
> >> 2 files changed, 88 insertions(+), 36 deletions(-)
> >> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
> >> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
> >>
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > ./Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml:
> > Unable to find schema file matching $id:
> > http://devicetree.org/schemas/sound/component-common.yaml
>
> This is a false error because the bot does not have the patch applied
> by Mark from v1 here [0]
>
> [0]: https://lore.kernel.org/all/167543616131.928818.17902040818579023398.b4-ty@kernel.org/
State that in this patch and the bot's advanced AI capabilities will
not send the report.
Rob
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-07 13:50 ` Rob Herring
0 siblings, 0 replies; 62+ messages in thread
From: Rob Herring @ 2023-02-07 13:50 UTC (permalink / raw)
To: Jerome Brunet
Cc: Mark Brown, Neil Armstrong, Krzysztof Kozlowski, Kevin Hilman,
linux-kernel, alsa-devel, devicetree, linux-amlogic
On Tue, Feb 7, 2023 at 3:33 AM Jerome Brunet <jbrunet@baylibre.com> wrote:
>
>
> On Mon 06 Feb 2023 at 13:59, Rob Herring <robh@kernel.org> wrote:
>
> > On Mon, 06 Feb 2023 16:34:44 +0100, Jerome Brunet wrote:
> >> Convert the DT binding documentation for the Amlogic tdm formatters to
> >> schema.
> >>
> >> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> >> ---
> >> .../sound/amlogic,axg-tdm-formatters.txt | 36 --------
> >> .../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
> >> 2 files changed, 88 insertions(+), 36 deletions(-)
> >> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
> >> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
> >>
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > ./Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml:
> > Unable to find schema file matching $id:
> > http://devicetree.org/schemas/sound/component-common.yaml
>
> This is a false error because the bot does not have the patch applied
> by Mark from v1 here [0]
>
> [0]: https://lore.kernel.org/all/167543616131.928818.17902040818579023398.b4-ty@kernel.org/
State that in this patch and the bot's advanced AI capabilities will
not send the report.
Rob
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
@ 2023-02-07 13:50 ` Rob Herring
0 siblings, 0 replies; 62+ messages in thread
From: Rob Herring @ 2023-02-07 13:50 UTC (permalink / raw)
To: Jerome Brunet
Cc: Mark Brown, Neil Armstrong, Krzysztof Kozlowski, Kevin Hilman,
linux-kernel, alsa-devel, devicetree, linux-amlogic
On Tue, Feb 7, 2023 at 3:33 AM Jerome Brunet <jbrunet@baylibre.com> wrote:
>
>
> On Mon 06 Feb 2023 at 13:59, Rob Herring <robh@kernel.org> wrote:
>
> > On Mon, 06 Feb 2023 16:34:44 +0100, Jerome Brunet wrote:
> >> Convert the DT binding documentation for the Amlogic tdm formatters to
> >> schema.
> >>
> >> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> >> ---
> >> .../sound/amlogic,axg-tdm-formatters.txt | 36 --------
> >> .../sound/amlogic,axg-tdm-formatters.yaml | 88 +++++++++++++++++++
> >> 2 files changed, 88 insertions(+), 36 deletions(-)
> >> delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
> >> create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
> >>
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > ./Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml:
> > Unable to find schema file matching $id:
> > http://devicetree.org/schemas/sound/component-common.yaml
>
> This is a false error because the bot does not have the patch applied
> by Mark from v1 here [0]
>
> [0]: https://lore.kernel.org/all/167543616131.928818.17902040818579023398.b4-ty@kernel.org/
State that in this patch and the bot's advanced AI capabilities will
not send the report.
Rob
_______________________________________________
Alsa-devel mailing list -- alsa-devel@alsa-project.org
To unsubscribe send an email to alsa-devel-leave@alsa-project.org
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: (subset) [PATCH v2 0/7] ASoC: dt-bindings: meson: covert axg audio to schema
2023-02-06 15:34 ` Jerome Brunet
@ 2023-02-07 15:06 ` Mark Brown
-1 siblings, 0 replies; 62+ messages in thread
From: Mark Brown @ 2023-02-07 15:06 UTC (permalink / raw)
To: alsa-devel, devicetree, Jerome Brunet
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On Mon, 06 Feb 2023 16:34:42 +0100, Jerome Brunet wrote:
> Convert AXG audio dt-binding documentation to schema
>
> Changes since v1:
> * Drop 2 patches applied with v1
> * Drop node name patterns
> * Fix examples indentation
> * Yaml fixups requested by Krzysztof
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/7] ASoC: dt-bindings: meson: convert axg tdm interface to schema
commit: cdff91122de52f480bea730fee6665a7404d758c
[2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
commit: c5536e7be70cf2ab55c674b3c2120565e9559c50
[3/7] ASoC: dt-bindings: meson: convert axg pdm to schema
commit: 4d37c72ec42374c5ad416f851b572a9fb794e8ef
[4/7] ASoC: dt-bindings: meson: convert axg fifo to schema
commit: 6b6f5ea7ab0062d152a3bc9192cee45c7fc31387
[5/7] ASoC: dt-bindings: meson: convert axg spdif input to schema
commit: ede6aa4087abfac527267c4ac5bb6eebdfe958ba
[6/7] ASoC: dt-bindings: meson: convert axg spdif output to schema
commit: 32f7b9102bfc48a210bf655e049145f6450b03a0
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: (subset) [PATCH v2 0/7] ASoC: dt-bindings: meson: covert axg audio to schema
@ 2023-02-07 15:06 ` Mark Brown
0 siblings, 0 replies; 62+ messages in thread
From: Mark Brown @ 2023-02-07 15:06 UTC (permalink / raw)
To: alsa-devel, devicetree, Jerome Brunet
Cc: linux-amlogic, Kevin Hilman, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, linux-kernel
On Mon, 06 Feb 2023 16:34:42 +0100, Jerome Brunet wrote:
> Convert AXG audio dt-binding documentation to schema
>
> Changes since v1:
> * Drop 2 patches applied with v1
> * Drop node name patterns
> * Fix examples indentation
> * Yaml fixups requested by Krzysztof
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/7] ASoC: dt-bindings: meson: convert axg tdm interface to schema
commit: cdff91122de52f480bea730fee6665a7404d758c
[2/7] ASoC: dt-bindings: meson: convert axg tdm formatters to schema
commit: c5536e7be70cf2ab55c674b3c2120565e9559c50
[3/7] ASoC: dt-bindings: meson: convert axg pdm to schema
commit: 4d37c72ec42374c5ad416f851b572a9fb794e8ef
[4/7] ASoC: dt-bindings: meson: convert axg fifo to schema
commit: 6b6f5ea7ab0062d152a3bc9192cee45c7fc31387
[5/7] ASoC: dt-bindings: meson: convert axg spdif input to schema
commit: ede6aa4087abfac527267c4ac5bb6eebdfe958ba
[6/7] ASoC: dt-bindings: meson: convert axg spdif output to schema
commit: 32f7b9102bfc48a210bf655e049145f6450b03a0
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 62+ messages in thread
end of thread, other threads:[~2023-02-07 23:20 UTC | newest]
Thread overview: 62+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-06 15:34 [PATCH v2 0/7] ASoC: dt-bindings: meson: covert axg audio to schema Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 15:34 ` [PATCH v2 1/7] ASoC: dt-bindings: meson: convert axg tdm interface " Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 19:10 ` Krzysztof Kozlowski
2023-02-06 19:10 ` Krzysztof Kozlowski
2023-02-06 19:10 ` Krzysztof Kozlowski
2023-02-06 15:34 ` [PATCH v2 2/7] ASoC: dt-bindings: meson: convert axg tdm formatters " Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 19:12 ` Krzysztof Kozlowski
2023-02-06 19:12 ` Krzysztof Kozlowski
2023-02-06 19:12 ` Krzysztof Kozlowski
2023-02-06 19:59 ` Rob Herring
2023-02-06 19:59 ` Rob Herring
2023-02-06 19:59 ` Rob Herring
2023-02-07 9:29 ` Jerome Brunet
2023-02-07 9:29 ` Jerome Brunet
2023-02-07 9:29 ` Jerome Brunet
2023-02-07 13:50 ` Rob Herring
2023-02-07 13:50 ` Rob Herring
2023-02-07 13:50 ` Rob Herring
2023-02-06 15:34 ` [PATCH v2 3/7] ASoC: dt-bindings: meson: convert axg pdm " Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 19:13 ` Krzysztof Kozlowski
2023-02-06 19:13 ` Krzysztof Kozlowski
2023-02-06 19:13 ` Krzysztof Kozlowski
2023-02-06 15:34 ` [PATCH v2 4/7] ASoC: dt-bindings: meson: convert axg fifo " Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 19:14 ` Krzysztof Kozlowski
2023-02-06 19:14 ` Krzysztof Kozlowski
2023-02-06 19:14 ` Krzysztof Kozlowski
2023-02-06 15:34 ` [PATCH v2 5/7] ASoC: dt-bindings: meson: convert axg spdif input " Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 19:15 ` Krzysztof Kozlowski
2023-02-06 19:15 ` Krzysztof Kozlowski
2023-02-06 19:15 ` Krzysztof Kozlowski
2023-02-06 15:34 ` [PATCH v2 6/7] ASoC: dt-bindings: meson: convert axg spdif output " Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 19:16 ` Krzysztof Kozlowski
2023-02-06 19:16 ` Krzysztof Kozlowski
2023-02-06 19:16 ` Krzysztof Kozlowski
2023-02-06 15:34 ` [PATCH v2 7/7] ASoC: dt-bindings: meson: convert axg sound card control " Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 15:34 ` Jerome Brunet
2023-02-06 19:21 ` Krzysztof Kozlowski
2023-02-06 19:21 ` Krzysztof Kozlowski
2023-02-06 19:21 ` Krzysztof Kozlowski
2023-02-07 9:25 ` Jerome Brunet
2023-02-07 9:25 ` Jerome Brunet
2023-02-07 9:25 ` Jerome Brunet
2023-02-07 12:30 ` Krzysztof Kozlowski
2023-02-07 12:30 ` Krzysztof Kozlowski
2023-02-07 12:30 ` Krzysztof Kozlowski
2023-02-07 15:06 ` (subset) [PATCH v2 0/7] ASoC: dt-bindings: meson: covert axg audio " Mark Brown
2023-02-07 15:06 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.