[PATCH v1 00/17] colibri-imx8x: support refresh

[PATCH v1 00/17] colibri-imx8x: support refresh

[Andrejs Cainikovs]

This series refreshes Colibri iMX8X support as follows:
- enable fuse command
- revert switch to binman
- set boot delay
- enable bootcount limit
- move bootaux memory base and size configuration to defconfig
- update env memory layout
- use load instead of fatload in M4 boot environment helpers
- provide proper prompt
- drop obsolete environment variables
- implement SoC variant handling
- move SoC variant detection into its own function
- update update_uboot confirmation message
- remove obsolete SDHC related config defines
- remove obsolete net usb start
- enable OF_SYSTEM_SETUP for M4 memory reservation
- introduce setup setting setupargs
- add 2nd ethernet address

Andrejs Cainikovs (7):
  board: colibri-imx8x: add 2nd ethernet address
  colibri-imx8x: construct fdtfile dynamically
  colibri-imx8x: drop obsolete environment variables
  colibri-imx8x: switch from fatload to load
  colibri-imx8x: set bootaux memory base and size
  Revert "imx: imx8x: colibri: switch to binman"
  colibri-imx8x: enable fuse command

Igor Opaniuk (1):
  colibri-imx8x: provide proper CONFIG_SYS_PROMPT

Marcel Ziswiler (6):
  colibri-imx8x: remove obsolete net usb start
  colibri-imx8x: remove obsolete sdhc related config defines
  colibri-imx8x: update update_uboot confirmation message
  colibri-imx8x: update env memory layout
  colibri-imx8x: enable environment bootcount limit
  colibri-imx8x: set bootdelay

Max Krummenacher (1):
  colibri-imx8x: extract is_imx8dx() from ram detection

Philippe Schenker (2):
  colibri-imx8x: Remove baudrate from console argument
  defconfig: colibri-imx8x: enable CONFIG_OF_SYSTEM_SETUP

 arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi |  2 -
 arch/arm/mach-imx/imx8/Kconfig               |  1 -
 board/toradex/colibri-imx8x/Kconfig          |  3 +
 board/toradex/colibri-imx8x/colibri-imx8x.c  | 36 ++++++---
 configs/colibri-imx8x_defconfig              | 13 +++-
 include/configs/colibri-imx8x.h              | 78 ++++----------------
 6 files changed, 56 insertions(+), 77 deletions(-)

-- 
2.34.1

[PATCH v1 01/17] board: colibri-imx8x: add 2nd ethernet address

[Andrejs Cainikovs]

All Colibri iMX8X variants have 2nd RGMII on SoC, so add the address
for 2nd ethernet.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 board/toradex/colibri-imx8x/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/board/toradex/colibri-imx8x/Kconfig b/board/toradex/colibri-imx8x/Kconfig
index b89840a379c..cb11e2c318f 100644
--- a/board/toradex/colibri-imx8x/Kconfig
+++ b/board/toradex/colibri-imx8x/Kconfig
@@ -12,6 +12,9 @@ config SYS_CONFIG_NAME
 config TDX_CFG_BLOCK
 	default y
 
+config TDX_CFG_BLOCK_2ND_ETHADDR
+	default y
+
 config TDX_HAVE_MMC
 	default y
 
-- 
2.34.1

[PATCH v1 02/17] colibri-imx8x: Remove baudrate from console argument

[Andrejs Cainikovs]

From: Philippe Schenker <philippe.schenker@toradex.com>

This commit does remove the options argument from the console
kernel-argument as it prevents the serial driver from outputting
anything.

Do this by switchting to use the variable "setup" as it is done on other
Toradex modules.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 include/configs/colibri-imx8x.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 3ec36aa773e..b337ef28533 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -64,7 +64,7 @@
 	MEM_LAYOUT_ENV_SETTINGS \
 	"boot_file=Image\0" \
 	"boot_script_dhcp=boot.scr\0" \
-	"consoleargs=console=ttyLP3,${baudrate} earlycon\0" \
+	"console=ttyLP3\0" \
 	"fdt_addr=0x83000000\0"	\
 	"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
 	"fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
@@ -77,6 +77,8 @@
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=1\0" \
 	"panel=NULL\0" \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
+		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
-- 
2.34.1

[PATCH v1 03/17] defconfig: colibri-imx8x: enable CONFIG_OF_SYSTEM_SETUP

[Andrejs Cainikovs]

From: Philippe Schenker <philippe.schenker@toradex.com>

Enable a call to ft_system_setup() which reserves M4 memory region.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 configs/colibri-imx8x_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 83f39996b1a..6a5c6e1d61b 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -19,6 +19,7 @@ CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_VERBOSE=y
+CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_LOG=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-- 
2.34.1

[PATCH v1 04/17] colibri-imx8x: remove obsolete net usb start

[Andrejs Cainikovs]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Remove obsolete net USB start.

While at it also add a comment about enabling distro-boot.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 include/configs/colibri-imx8x.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index b337ef28533..c530cd7db9a 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -35,13 +35,12 @@
 
 #define MFG_NAND_PARTITION ""
 
+/* Enable Distro Boot */
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#undef BOOTENV_RUN_NET_USB_START
-#define BOOTENV_RUN_NET_USB_START ""
 
 #define CFG_MFG_ENV_SETTINGS \
 	"mfgtool_args=setenv bootargs ${consoleargs} " \
-- 
2.34.1

[PATCH v1 05/17] colibri-imx8x: remove obsolete sdhc related config defines

[Andrejs Cainikovs]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Remove obsolete SDHC related config defines. Nowadays, all SDHC related
hardware configuration comes from the device tree.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 include/configs/colibri-imx8x.h | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index c530cd7db9a..f493ba9b0f8 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -10,10 +10,6 @@
 #include <linux/sizes.h>
 #include <linux/stringify.h>
 
-#define CFG_SYS_FSL_ESDHC_ADDR	0
-#define USDHC1_BASE_ADDR		0x5b010000
-#define USDHC2_BASE_ADDR		0x5b020000
-
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"fdt_addr_r=0x83000000\0" \
 	"kernel_addr_r=0x81000000\0" \
@@ -85,13 +81,6 @@
 		"${blkcnt}; fi\0" \
 	"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
 
-/* Link Definitions */
-
-/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-
-/* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
-#define CFG_SYS_FSL_USDHC_NUM	2
-
 #define CFG_SYS_SDRAM_BASE		0x80000000
 #define PHYS_SDRAM_1			0x80000000
 #define PHYS_SDRAM_2			0x880000000
-- 
2.34.1

[PATCH v1 06/17] colibri-imx8x: update update_uboot confirmation message

[Andrejs Cainikovs]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Update update_uboot confirmation message.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 include/configs/colibri-imx8x.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index f493ba9b0f8..7826596a331 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -74,7 +74,7 @@
 	"panel=NULL\0" \
 	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
 		"consoleblank=0 earlycon\0" \
-	"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
+	"update_uboot=askenv confirm Did you load flash.bin resp. u-boot-dtb.imx (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
 		"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
-- 
2.34.1

[PATCH v1 07/17] colibri-imx8x: extract is_imx8dx() from ram detection

[Andrejs Cainikovs]

From: Max Krummenacher <max.krummenacher@toradex.com>

Refactor the detection of QXP vs. DX SoC into its own helper function.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 board/toradex/colibri-imx8x/colibri-imx8x.c | 22 ++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/board/toradex/colibri-imx8x/colibri-imx8x.c b/board/toradex/colibri-imx8x/colibri-imx8x.c
index 169d4d04b16..88eddbddaef 100644
--- a/board/toradex/colibri-imx8x/colibri-imx8x.c
+++ b/board/toradex/colibri-imx8x/colibri-imx8x.c
@@ -40,21 +40,25 @@ static void setup_iomux_uart(void)
 	imx8_iomux_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
 }
 
-void board_mem_get_layout(u64 *phys_sdram_1_start,
-			  u64 *phys_sdram_1_size,
-			  u64 *phys_sdram_2_start,
-			  u64 *phys_sdram_2_size)
+static int is_imx8dx(void)
 {
-	u32 is_dualx = 0, val = 0;
-	sc_err_t scierr = sc_misc_otp_fuse_read(-1, 6, &val);
+	u32 val = 0;
+	sc_err_t sc_err = sc_misc_otp_fuse_read(-1, 6, &val);
 
-	if (scierr == SC_ERR_NONE) {
+	if (sc_err == SC_ERR_NONE) {
 		/* DX has two A35 cores disabled */
-		is_dualx = (val & 0xf) != 0x0;
+		return (val & 0xf) != 0x0;
 	}
+	return false;
+}
 
+void board_mem_get_layout(u64 *phys_sdram_1_start,
+			  u64 *phys_sdram_1_size,
+			  u64 *phys_sdram_2_start,
+			  u64 *phys_sdram_2_size)
+{
 	*phys_sdram_1_start = PHYS_SDRAM_1;
-	if (is_dualx)
+	if (is_imx8dx())
 		/* Our DX based SKUs only have 1 GB RAM */
 		*phys_sdram_1_size = SZ_1G;
 	else
-- 
2.34.1

[PATCH v1 08/17] colibri-imx8x: construct fdtfile dynamically

[Andrejs Cainikovs]

The following expression is used to construct the device tree name:
fdtfile=${soc}-colibri-${fdt_board}.dtb

- soc is set dynamically (either imx8qxp or imx8dx)
- fdt_board can be modified by the user (eval-v3, aster, iris/iris-v2)

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 board/toradex/colibri-imx8x/colibri-imx8x.c | 14 ++++++++++++++
 configs/colibri-imx8x_defconfig             |  2 ++
 include/configs/colibri-imx8x.h             |  3 +--
 3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/board/toradex/colibri-imx8x/colibri-imx8x.c b/board/toradex/colibri-imx8x/colibri-imx8x.c
index 88eddbddaef..6ed9cc4fa80 100644
--- a/board/toradex/colibri-imx8x/colibri-imx8x.c
+++ b/board/toradex/colibri-imx8x/colibri-imx8x.c
@@ -123,6 +123,18 @@ int checkboard(void)
 	return 0;
 }
 
+static void select_dt_from_module_version(void)
+{
+	/*
+	 * The dtb filename is constructed from ${soc}-colibri-${fdt_board}.dtb.
+	 * Set soc depending on the used SoC.
+	 */
+	if (is_imx8dx())
+		env_set("soc", "imx8dx");
+	else
+		env_set("soc", "imx8qxp");
+}
+
 int board_init(void)
 {
 	board_gpio_init();
@@ -158,5 +170,7 @@ int board_late_init(void)
 	env_set("board_rev", "v1.0");
 #endif
 
+	select_dt_from_module_version();
+
 	return 0;
 }
diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 6a5c6e1d61b..6c1c9978d11 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -20,6 +20,8 @@ CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile ${soc}-colibri-${fdt_board}.dtb"
 CONFIG_LOG=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 7826596a331..9a4a5f3b5de 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -61,8 +61,7 @@
 	"boot_script_dhcp=boot.scr\0" \
 	"console=ttyLP3\0" \
 	"fdt_addr=0x83000000\0"	\
-	"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
-	"fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
+	"fdt_board=eval-v3\0" \
 	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
 	"image=Image\0" \
 	"initrd_addr=0x83800000\0" \
-- 
2.34.1

[PATCH v1 09/17] colibri-imx8x: drop obsolete environment variables

[Andrejs Cainikovs]

Drop obsolete environment variables boot_file, bootcmd_mfg,
fdt_addr, finduuid, image, mfgtool_args, mmcargs, mmcdev, mmcpart,
panel, sec_boot, vidargs.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 include/configs/colibri-imx8x.h | 35 +--------------------------------
 1 file changed, 1 insertion(+), 34 deletions(-)

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 9a4a5f3b5de..94243117f1c 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -8,7 +8,6 @@
 
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
-#include <linux/stringify.h>
 
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"fdt_addr_r=0x83000000\0" \
@@ -16,12 +15,6 @@
 	"ramdisk_addr_r=0x83800000\0" \
 	"scriptaddr=0x80800000\0"
 
-#ifdef CONFIG_AHAB_BOOT
-#define AHAB_ENV "sec_boot=yes\0"
-#else
-#define AHAB_ENV "sec_boot=no\0"
-#endif
-
 /* Boot M4 */
 #define M4_BOOT_ENV \
 	"m4_0_image=m4_0.bin\0" \
@@ -29,8 +22,6 @@
 		"${m4_0_image}\0" \
 	"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
 
-#define MFG_NAND_PARTITION ""
-
 /* Enable Distro Boot */
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
@@ -38,47 +29,23 @@
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
-#define CFG_MFG_ENV_SETTINGS \
-	"mfgtool_args=setenv bootargs ${consoleargs} " \
-		"rdinit=/linuxrc g_mass_storage.stall=0 " \
-		"g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
-		"g_mass_storage.idProduct=0x37FF " \
-		"g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
-		"${vidargs} clk_ignore_unused\0" \
-	"initrd_addr=0x83800000\0" \
-	"initrd_high=0xffffffff\0" \
-	"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
-		"${fdt_addr};\0" \
-
 /* Initial environment variables */
 #define CFG_EXTRA_ENV_SETTINGS \
-	AHAB_ENV \
 	BOOTENV \
-	CFG_MFG_ENV_SETTINGS \
 	M4_BOOT_ENV \
 	MEM_LAYOUT_ENV_SETTINGS \
-	"boot_file=Image\0" \
 	"boot_script_dhcp=boot.scr\0" \
 	"console=ttyLP3\0" \
-	"fdt_addr=0x83000000\0"	\
 	"fdt_board=eval-v3\0" \
-	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
-	"image=Image\0" \
 	"initrd_addr=0x83800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"mmcargs=setenv bootargs ${consoleargs} " \
-		"root=PARTUUID=${uuid} rootwait " \
-	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=1\0" \
-	"panel=NULL\0" \
 	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
 		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin resp. u-boot-dtb.imx (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
 		"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
-		"${blkcnt}; fi\0" \
-	"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
+		"${blkcnt}; fi\0"
 
 #define CFG_SYS_SDRAM_BASE		0x80000000
 #define PHYS_SDRAM_1			0x80000000
-- 
2.34.1

[PATCH v1 10/17] colibri-imx8x: provide proper CONFIG_SYS_PROMPT

[Andrejs Cainikovs]

From: Igor Opaniuk <igor.opaniuk@toradex.com>

Provide proper sys prompt, which should be "Colibri iMX8X #".

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 configs/colibri-imx8x_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 6c1c9978d11..a39219db58e 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -9,6 +9,7 @@ CONFIG_ENV_OFFSET=0xFFFFDE00
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-colibri"
 CONFIG_TARGET_COLIBRI_IMX8X=y
+CONFIG_SYS_PROMPT="Colibri iMX8X # "
 CONFIG_SYS_LOAD_ADDR=0x80280000
 CONFIG_SYS_MEMTEST_START=0x88000000
 CONFIG_SYS_MEMTEST_END=0x89000000
-- 
2.34.1

[PATCH v1 11/17] colibri-imx8x: switch from fatload to load

[Andrejs Cainikovs]

Make sure M4 binary loading works equally well
on ext4 as well as fat file systems.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 include/configs/colibri-imx8x.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 94243117f1c..b4814bdfbfc 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -18,9 +18,8 @@
 /* Boot M4 */
 #define M4_BOOT_ENV \
 	"m4_0_image=m4_0.bin\0" \
-	"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
-		"${m4_0_image}\0" \
-	"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
+	"loadm4image_0=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_0_image}\0" \
+	"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0"
 
 /* Enable Distro Boot */
 #define BOOT_TARGET_DEVICES(func) \
-- 
2.34.1

[PATCH v1 12/17] colibri-imx8x: update env memory layout

[Andrejs Cainikovs]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Update the distro config env memory layout for the Colibri iMX8X:

- kernel_comp_addr_r=0xb0000000 temporary area for uncompressing (ie FIT
images or Image.gz booted using booti)
- kernel_comp_size=0x08000000
- loadaddr=0x95400000 avoiding any reserved areas located before that
- fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel
- scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt
- ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script

Idea of memory layout taken from commit a9f1e35bedc4
("apalis-imx8: update env memory layout").

Note that for our regular BSP Layers and Reference Images for Yocto
Project an updated distro boot script is required (see
meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 configs/colibri-imx8x_defconfig |  2 +-
 include/configs/colibri-imx8x.h | 10 ++++++----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index a39219db58e..53002c9537d 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -10,7 +10,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-colibri"
 CONFIG_TARGET_COLIBRI_IMX8X=y
 CONFIG_SYS_PROMPT="Colibri iMX8X # "
-CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_SYS_LOAD_ADDR=0x95c00000
 CONFIG_SYS_MEMTEST_START=0x88000000
 CONFIG_SYS_MEMTEST_END=0x89000000
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index b4814bdfbfc..750336b0eb6 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -10,10 +10,12 @@
 #include <linux/sizes.h>
 
 #define MEM_LAYOUT_ENV_SETTINGS \
-	"fdt_addr_r=0x83000000\0" \
-	"kernel_addr_r=0x81000000\0" \
-	"ramdisk_addr_r=0x83800000\0" \
-	"scriptaddr=0x80800000\0"
+	"fdt_addr_r=0x9d400000\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"kernel_comp_addr_r=0xb0000000\0" \
+	"kernel_comp_size=0x08000000\0" \
+	"ramdisk_addr_r=0x9d500000\0" \
+	"scriptaddr=0x9d480000\0"
 
 /* Boot M4 */
 #define M4_BOOT_ENV \
-- 
2.34.1

[PATCH v1 13/17] colibri-imx8x: set bootaux memory base and size

[Andrejs Cainikovs]

Move i.MX auxiliary core memory base and size configuration
to defconfig where it should belong.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 configs/colibri-imx8x_defconfig | 2 ++
 include/configs/colibri-imx8x.h | 5 -----
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 53002c9537d..08d284bf912 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -8,6 +8,8 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFDE00
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-colibri"
+CONFIG_BOOTAUX_RESERVED_MEM_BASE=0x88000000
+CONFIG_BOOTAUX_RESERVED_MEM_SIZE=0x08000000
 CONFIG_TARGET_COLIBRI_IMX8X=y
 CONFIG_SYS_PROMPT="Colibri iMX8X # "
 CONFIG_SYS_LOAD_ADDR=0x95c00000
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 750336b0eb6..042fcb8757f 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -54,9 +54,4 @@
 #define PHYS_SDRAM_1_SIZE		SZ_2G		/* 2 GB */
 #define PHYS_SDRAM_2_SIZE		0x00000000	/* 0 GB */
 
-/* Generic Timer Definitions */
-
-#define BOOTAUX_RESERVED_MEM_BASE 0x88000000
-#define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */
-
 #endif /* __COLIBRI_IMX8X_H */
-- 
2.34.1

[PATCH v1 14/17] colibri-imx8x: enable environment bootcount limit

[Andrejs Cainikovs]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Enable optional environment bootcount limit functionality.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 configs/colibri-imx8x_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 08d284bf912..bebe87ac918 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -59,6 +59,8 @@ CONFIG_USE_NETMASK=y
 CONFIG_NETMASK="255.255.255.0"
 CONFIG_USE_SERVERIP=y
 CONFIG_SERVERIP="192.168.10.1"
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
 CONFIG_CLK_IMX8=y
 CONFIG_CPU=y
 CONFIG_FXL6408_GPIO=y
-- 
2.34.1

[PATCH v1 15/17] colibri-imx8x: set bootdelay

[Andrejs Cainikovs]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Set the boot delay to one second.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 configs/colibri-imx8x_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index bebe87ac918..450cd1981bb 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -23,6 +23,7 @@ CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTDELAY=1
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile ${soc}-colibri-${fdt_board}.dtb"
 CONFIG_LOG=y
-- 
2.34.1

[PATCH v1 16/17] Revert "imx: imx8x: colibri: switch to binman"

[Andrejs Cainikovs]

This reverts commit bdadc140a127b14a666d2007eddc3f65c8de7d5a.

We do not want this, see [1].

[1] https://lore.kernel.org/all/56cf058164f331ce99ce75b0751b825ee2e07fc0.camel@toradex.com/

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 2 --
 arch/arm/mach-imx/imx8/Kconfig               | 1 -
 configs/colibri-imx8x_defconfig              | 1 -
 3 files changed, 4 deletions(-)

diff --git a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
index 91e2944781e..322429a98a7 100644
--- a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
@@ -3,8 +3,6 @@
  * Copyright 2019 Toradex AG
  */
 
-#include "imx8qxp-u-boot.dtsi"
-
 &{/imx8qx-pm} {
 
 	u-boot,dm-pre-proper;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 37d12d18958..018b87b85b7 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -51,7 +51,6 @@ config TARGET_APALIS_IMX8
 
 config TARGET_COLIBRI_IMX8X
 	bool "Support Colibri iMX8X module"
-	select BINMAN
 	select BOARD_LATE_INIT
 	select IMX8QXP
 
diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 450cd1981bb..8b4592020d5 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -20,7 +20,6 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
-CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_BOOTDELAY=1
-- 
2.34.1

[PATCH v1 17/17] colibri-imx8x: enable fuse command

[Andrejs Cainikovs]

This command is required for initial SoC provisioning.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 configs/colibri-imx8x_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 8b4592020d5..43aa4230ff9 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -38,6 +38,7 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DM=y
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-- 
2.34.1

[PATCH v1 01/17] board: colibri-imx8x: add 2nd ethernet address

[sbabic]

> All Colibri iMX8X variants have 2nd RGMII on SoC, so add the address
> for 2nd ethernet.
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 06/17] colibri-imx8x: update update_uboot confirmation message

[sbabic]

> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Update update_uboot confirmation message.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 13/17] colibri-imx8x: set bootaux memory base and size

[sbabic]

> Move i.MX auxiliary core memory base and size configuration
> to defconfig where it should belong.
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 08/17] colibri-imx8x: construct fdtfile dynamically

[sbabic]

> The following expression is used to construct the device tree name:
> fdtfile=${soc}-colibri-${fdt_board}.dtb
> - soc is set dynamically (either imx8qxp or imx8dx)
> - fdt_board can be modified by the user (eval-v3, aster, iris/iris-v2)
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 09/17] colibri-imx8x: drop obsolete environment variables

[sbabic]

> Drop obsolete environment variables boot_file, bootcmd_mfg,
> fdt_addr, finduuid, image, mfgtool_args, mmcargs, mmcdev, mmcpart,
> panel, sec_boot, vidargs.
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 11/17] colibri-imx8x: switch from fatload to load

[sbabic]

> Make sure M4 binary loading works equally well
> on ext4 as well as fat file systems.
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 10/17] colibri-imx8x: provide proper CONFIG_SYS_PROMPT

[sbabic]

> From: Igor Opaniuk <igor.opaniuk@toradex.com>
> Provide proper sys prompt, which should be "Colibri iMX8X #".
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 17/17] colibri-imx8x: enable fuse command

[sbabic]

> This command is required for initial SoC provisioning.
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 16/17] Revert "imx: imx8x: colibri: switch to binman"

[sbabic]

> This reverts commit bdadc140a127b14a666d2007eddc3f65c8de7d5a.
> We do not want this, see [1].
> [1] https://lore.kernel.org/all/56cf058164f331ce99ce75b0751b825ee2e07fc0.camel@toradex.com/
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 12/17] colibri-imx8x: update env memory layout

[sbabic]

> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Update the distro config env memory layout for the Colibri iMX8X:
> - kernel_comp_addr_r=0xb0000000 temporary area for uncompressing (ie FIT
> images or Image.gz booted using booti)
> - kernel_comp_size=0x08000000
> - loadaddr=0x95400000 avoiding any reserved areas located before that
> - fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel
> - scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt
> - ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script
> Idea of memory layout taken from commit a9f1e35bedc4
> ("apalis-imx8: update env memory layout").
> Note that for our regular BSP Layers and Reference Images for Yocto
> Project an updated distro boot script is required (see
> meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot).
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 05/17] colibri-imx8x: remove obsolete sdhc related config defines

[sbabic]

> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Remove obsolete SDHC related config defines. Nowadays, all SDHC related
> hardware configuration comes from the device tree.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 07/17] colibri-imx8x: extract is_imx8dx() from ram detection

[sbabic]

> From: Max Krummenacher <max.krummenacher@toradex.com>
> Refactor the detection of QXP vs. DX SoC into its own helper function.
> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 02/17] colibri-imx8x: Remove baudrate from console argument

[sbabic]

> From: Philippe Schenker <philippe.schenker@toradex.com>
> This commit does remove the options argument from the console
> kernel-argument as it prevents the serial driver from outputting
> anything.
> Do this by switchting to use the variable "setup" as it is done on other
> Toradex modules.
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 04/17] colibri-imx8x: remove obsolete net usb start

[sbabic]

> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Remove obsolete net USB start.
> While at it also add a comment about enabling distro-boot.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 15/17] colibri-imx8x: set bootdelay

[sbabic]

> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Set the boot delay to one second.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 14/17] colibri-imx8x: enable environment bootcount limit

[sbabic]

> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Enable optional environment bootcount limit functionality.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH v1 03/17] defconfig: colibri-imx8x: enable CONFIG_OF_SYSTEM_SETUP

[sbabic]

> From: Philippe Schenker <philippe.schenker@toradex.com>
> Enable a call to ft_system_setup() which reserves M4 memory region.
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================