[PATCH v2 0/7] Display support for MSM8226

From: Luca Weiss <luca@z3ntu.xyz>
To: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org, Rob Clark <robdclark@gmail.com>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
	Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Krishna Manikandan <quic_mkrishn@quicinc.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Luca Weiss <luca@z3ntu.xyz>,
	Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v2 0/7] Display support for MSM8226
Date: Tue, 30 May 2023 20:24:10 +0200	[thread overview]
Message-ID: <20230308-msm8226-mdp-v2-0-e005b769ee28@z3ntu.xyz> (raw)

This series adds the required configs for MDP5 and DSI blocks that are
needed for MDSS on MSM8226. Finally we can add the new nodes into the
dts.

Tested on apq8026-lg-lenok and msm8926-htc-memul.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes in v2:
- In dsi-phy-28nm.yaml fix the order of the compatibles 1/7 (Conor)
- Remove leftover debugging comments from 6/7 (Konrad)
- Rewrap some clock-names lines and move status property last in 7/7
  (Konrad)
- Pick up tags
- Link to v1: https://lore.kernel.org/r/20230308-msm8226-mdp-v1-0-679f335d3d5b@z3ntu.xyz

---
Luca Weiss (7):
      dt-bindings: msm: dsi-phy-28nm: Document msm8226 compatible
      dt-bindings: display/msm: dsi-controller-main: Add msm8226 compatible
      dt-bindings: display/msm: qcom,mdp5: Add msm8226 compatible
      drm/msm/mdp5: Add MDP5 configuration for MSM8226
      drm/msm/dsi: Add configuration for MSM8226
      drm/msm/dsi: Add phy configuration for MSM8226
      ARM: dts: qcom: msm8226: Add mdss nodes

 .../bindings/display/msm/dsi-controller-main.yaml  |   2 +
 .../bindings/display/msm/dsi-phy-28nm.yaml         |   3 +-
 .../devicetree/bindings/display/msm/qcom,mdp5.yaml |   1 +
 .../devicetree/bindings/display/msm/qcom,mdss.yaml |   1 +
 arch/arm/boot/dts/qcom-msm8226.dtsi                | 127 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c           |  82 +++++++++++++
 drivers/gpu/drm/msm/dsi/dsi_cfg.c                  |   2 +
 drivers/gpu/drm/msm/dsi/dsi_cfg.h                  |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c              |   2 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h              |   3 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c         |  97 ++++++++++++++++
 11 files changed, 319 insertions(+), 2 deletions(-)
---
base-commit: e5c87df1b3ab5220362ec48f907cc62ba8928b01
change-id: 20230308-msm8226-mdp-6431e8d672a0

Best regards,
-- 
Luca Weiss <luca@z3ntu.xyz>