From: Nishanth Menon <nm@ti.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Tero Kristo <kristo@kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>,
Julien Panis <jpanis@baylibre.com>, Bryan Brattlof <bb@ti.com>,
Jason Kridner <jkridner@gmail.com>,
Robert Nelson <robertcnelson@gmail.com>
Subject: [PATCH 2/3] arm64: dts: ti: Add k3-am625-beagleplay
Date: Sat, 11 Mar 2023 05:10:21 -0600 [thread overview]
Message-ID: <20230311111022.23717-3-nm@ti.com> (raw)
In-Reply-To: <20230311111022.23717-1-nm@ti.com>
From: Robert Nelson <robertcnelson@gmail.com>
BeagleBoard.org BeaglePlay is an easy to use, affordable open source
hardware single board computer based on the Texas Instruments AM625
SoC that allows you to create connected devices that work even at long
distances using IEEE 802.15.4g LR-WPAN and IEEE 802.3cg 10Base-T1L.
Expansion is provided over open standards based mikroBUS, Grove and
QWIIC headers among other interfaces.
This board family can be identified by the 24c32 eeprom:
[aa 55 33 ee 01 37 00 10 2e 00 42 45 41 47 4c 45 |.U3..7....BEAGLE|]
[50 4c 41 59 2d 41 30 2d 00 00 30 32 30 30 37 38 |PLAY-A0-..020078|]
https://beagleplay.org/
https://git.beagleboard.org/beagleplay/beagleplay
Co-developed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
---
arch/arm64/boot/dts/ti/Makefile | 1 +
.../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 753 ++++++++++++++++++
2 files changed, 754 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 6acd12409d59..09b4eafd5716 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -9,6 +9,7 @@
# alphabetically.
# Boards with AM62x SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
# Boards with AM62Ax SoC
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
new file mode 100644
index 000000000000..d1957d8fd779
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -0,0 +1,753 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://beagleplay.org/
+ *
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "k3-am625.dtsi"
+
+/ {
+ compatible = "beagle,am625-beagleplay", "ti,am625";
+ model = "BeagleBoard.org BeaglePlay";
+
+ aliases {
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ gpio0 = &main_gpio0;
+ gpio1 = &main_gpio1;
+ gpio2 = &mcu_gpio0;
+ i2c0 = &main_i2c0;
+ i2c1 = &main_i2c1;
+ i2c2 = &main_i2c2;
+ i2c3 = &main_i2c3;
+ i2c4 = &wkup_i2c0;
+ i2c5 = &mcu_i2c0;
+ mdio-gpio0 = &mdio0;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ mmc2 = &sdhci2;
+ rtc0 = &rtc;
+ rtc1 = &wkup_rtc0;
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart5;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* 2G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops@9ca00000 {
+ compatible = "ramoops";
+ reg = <0x00 0x9ca00000 0x00 0x00100000>;
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x00>;
+ pmsg-size = <0x8000>;
+ };
+
+ secure_tfa_ddr: tfa@9e780000 {
+ reg = <0x00 0x9e780000 0x00 0x80000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+
+ secure_ddr: optee@9e800000 {
+ reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+ alignment = <0x1000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9db00000 0x00 0xc00000>;
+ no-map;
+ };
+ };
+
+ vsys_5v0: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3: regulator-2 {
+ /* output of TLV62595DMQR-U12 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ wlan_en: regulator-3 {
+ /* OUTPUT of SN74AVC2T244DQMR */
+ compatible = "regulator-fixed";
+ regulator-name = "wlan_en";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&vdd_3v3>;
+ gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_en_pins_default>;
+ };
+
+ vdd_3v3_sd: regulator-4 {
+ /* output of TPS22918DBVR-U21 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_3v3_sd_pins_default>;
+
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&vdd_3v3>;
+ gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_sd_dv: regulator-5 {
+ compatible = "regulator-gpio";
+ regulator-name = "sd_hs200_switch";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_sd_dv_pins_default>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&vdd_3v3>;
+ gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ default-state = "off";
+ };
+
+ led-1 {
+ gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ default-state = "keep";
+ };
+
+ led-2 {
+ gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu";
+ function = LED_FUNCTION_CPU;
+ };
+
+ led-3 {
+ gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ led-4 {
+ gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_WLAN;
+ };
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usr_button_pins_default>;
+
+ usr: button-usr {
+ label = "User Key";
+ linux,code = <BTN_0>;
+ gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ /* Workaround for errata i2329 - just use mdio bitbang */
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio0_pins_default>;
+ gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw3g_phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ cpsw3g_phy1: ethernet-phy@1 {
+ reg = <1>;
+ reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <25>;
+ reset-deassert-us = <60000>; /* T2 */
+ };
+ };
+};
+
+&main_pmx0 {
+ gpio0_pins_default: gpio0-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
+ AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
+ AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
+ AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
+ AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
+ AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
+ AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
+ AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
+ AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
+ AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
+ AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
+ AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
+ AM62X_IOPAD(0x004c, PIN_INPUT, 7) /* (P24) GPMC0_AD4.GPIO0_19 */
+ AM62X_IOPAD(0x0050, PIN_INPUT, 7) /* (P22) GPMC0_AD5.GPIO0_20 */
+ AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
+ AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
+ >;
+ };
+
+ vdd_sd_dv_pins_default: vdd-sd-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+ >;
+ };
+
+ usr_button_pins_default: usr-button-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
+ >;
+ };
+
+ grove_pins_default: grove-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+ AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+ >;
+ };
+
+ local_i2c_pins_default: local-i2c-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+ AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+ >;
+ };
+
+ i2c2_1v8_pins_default: i2c2-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+ AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+ >;
+ };
+
+ mdio0_pins_default: mdio0-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */
+ AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */
+ >;
+ };
+
+ rgmii1_pins_default: rgmii1-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
+ AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
+ AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
+ AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
+ AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
+ AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
+ AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
+ AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
+ AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
+ AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
+ AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
+ AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+ >;
+ };
+
+ emmc_pins_default: emmc-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+ AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+ AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+ AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
+ AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
+ AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
+ AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
+ AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
+ AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
+ AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
+ >;
+ };
+
+ vdd_3v3_sd_pins_default: vdd-3v3-sd-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
+ >;
+ };
+
+ sd_pins_default: sd-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
+ AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+ AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
+ AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
+ AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
+ AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+ AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
+ >;
+ };
+
+ wifi_pins_default: wifi-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
+ AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
+ AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
+ AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
+ AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
+ AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
+ AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
+ AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
+ >;
+ };
+
+ wifi_en_pins_default: wifi-en-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
+ >;
+ };
+
+ wifi_wlirq_pins_default: wifi-wlirq-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
+ >;
+ };
+
+ spe_pins_default: spe-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
+ AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
+ AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
+ AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
+ AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
+ AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
+ AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
+ AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
+ AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
+ AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
+ AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
+ >;
+ };
+
+ mikrobus_i2c_pins_default: mikrobus-i2c-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
+ AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
+ >;
+ };
+
+ console_pins_default: console-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
+ AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+ >;
+ };
+
+ wifi_debug_uart_pins_default: wifi-debug-uart-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
+ AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
+ >;
+ };
+
+ usb1_pins_default: usb1-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
+ >;
+ };
+
+ pmic_irq_pins_default: pmic-irq-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
+ >;
+ };
+};
+
+&mcu_pmx0 {
+ i2c_qwiic_pins_default: i2c-qwiic-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
+ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
+ >;
+ };
+
+ gbe_pmx_obsclk: gbe-pmx-clk-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
+ >;
+ };
+
+ mcu_mikrobus_uart_pins_default: mcu-mikrobus-uart-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0014, PIN_INPUT, 0) /* (B5) MCU_UART0_RXD */
+ AM62X_MCU_IOPAD(0x0018, PIN_OUTPUT, 0) /* (A5) MCU_UART0_TXD */
+ >;
+ };
+
+ i2c_csi_pins_default: i2c-csi-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
+ AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
+ >;
+ };
+
+ mcu_mikrobus_rst_int_pins_default: mcu-mikrobus-rst-int-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (B4) WKUP_UART0_RXD */
+ AM62X_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (C5) WKUP_UART0_TXD */
+ >;
+ };
+
+ wifi_32k_clk: mcu-clk-out-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
+ >;
+ };
+};
+
+&a53_opp_table {
+ /* Requires VDD_CORE to be at 0.85V */
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ };
+};
+
+&wkup_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_csi_pins_default>;
+ clock-frequency = <400000>;
+ /* Enable with overlay for camera sensor */
+};
+
+&wkup_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mikrobus_rst_int_pins_default>;
+ status = "okay";
+};
+
+&mcu_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_qwiic_pins_default>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&mcu_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mikrobus_uart_pins_default>;
+ status = "okay";
+};
+
+&usbss0 {
+ ti,vbus-divider;
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+};
+
+&usbss1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins_default>;
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins_default
+ &spe_pins_default
+ &gbe_pmx_obsclk>;
+ assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
+ assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+ phy-mode = "rmii";
+ phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+ /* Workaround for errata i2329 - Use mdio bitbang */
+ status = "disabled";
+};
+
+&main_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_pins_default>;
+ gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */
+ "USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */
+ "EEPROM_WP", /* 10 */
+ "CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */
+ "CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "", /* 13-17 */
+ "USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */
+ "", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */
+ "", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
+ "", "", "", "", "", "", "", "", "", "", "", "", /* 43-54 */
+ "", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
+ "", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
+ "", "", "", "", "", "", /* 79-84 */
+ "BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK", /* 85-86 */
+ "", "", "", "", ""; /* 87-91 */
+};
+
+&main_gpio1 {
+ gpio-line-names = "", "", "", "", "", /* 0-4 */
+ "SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7", /* 5-7 */
+ "MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9", /* 8-9 */
+ "MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11", /* 10-11 */
+ "MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0", /* 12-13 */
+ "MIKROBUS_GPIO1_14", /* 14 */
+ "", "", "", "", "VDD_3V3_SD", "", "", /* 15-21 */
+ "MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23", /* 22-23 */
+ "MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25", /* 24-25 */
+ "", "", "", "", "", "", "", "", "", "", "", "", /* 26-37 */
+ "", "", "", "", "", "", "", "", "", "", /* 38-47 */
+ "SD_CD", "SD_VOLT_SEL", "", ""; /* 48-51 */
+};
+
+&main_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&local_i2c_pins_default>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ rtc: rtc@68 {
+ compatible = "ti,bq32000";
+ reg = <0x68>;
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ tps65219: pmic@30 {
+ compatible = "ti,tps65219";
+ reg = <0x30>;
+ buck1-supply = <&vsys_5v0>;
+ buck2-supply = <&vsys_5v0>;
+ buck3-supply = <&vsys_5v0>;
+ ldo1-supply = <&vdd_3v3>;
+ ldo2-supply = <&buck2_reg>;
+ ldo3-supply = <&vdd_3v3>;
+ ldo4-supply = <&vdd_3v3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ system-power-controller;
+ ti,power-button;
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-name = "VDD_CORE";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "VDD_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /*
+ * Regulator is left as is unused, vdd_sd
+ * is controlled via GPIO with bypass config
+ * as per the NVM configuration
+ */
+ regulator-name = "VDD_SD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-allow-bypass;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "VDDA_0V85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "VDD_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&grove_pins_default>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&main_i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_1v8_pins_default>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&main_i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikrobus_i2c_pins_default>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins_default>;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+ status = "okay";
+};
+
+&sdhci1 {
+ /* SD/MMC */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pins_default>;
+
+ vmmc-supply = <&vdd_3v3_sd>;
+ vqmmc-supply = <&vdd_sd_dv>;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+ cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+ cd-debounce-delay-ms = <100>;
+ ti,fails-without-test-cd;
+ status = "okay";
+};
+
+&sdhci2 {
+ vmmc-supply = <&wlan_en>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pins_default &wifi_32k_clk>;
+ bus-width = <4>;
+ non-removable;
+ ti,fails-without-test-cd;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ ti,driver-strength-ohm = <50>;
+ assigned-clocks = <&k3_clks 157 158>;
+ assigned-clock-parents = <&k3_clks 157 160>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1807";
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_wlirq_pins_default>;
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&console_pins_default>;
+ status = "okay";
+};
+
+&main_uart1 {
+ /* Main UART1 is used by TIFS firmware */
+ status = "reserved";
+};
+
+&main_uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_debug_uart_pins_default>;
+ status = "okay";
+};
--
2.37.2
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Tero Kristo <kristo@kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>,
Julien Panis <jpanis@baylibre.com>, Bryan Brattlof <bb@ti.com>,
Jason Kridner <jkridner@gmail.com>,
Robert Nelson <robertcnelson@gmail.com>
Subject: [PATCH 2/3] arm64: dts: ti: Add k3-am625-beagleplay
Date: Sat, 11 Mar 2023 05:10:21 -0600 [thread overview]
Message-ID: <20230311111022.23717-3-nm@ti.com> (raw)
In-Reply-To: <20230311111022.23717-1-nm@ti.com>
From: Robert Nelson <robertcnelson@gmail.com>
BeagleBoard.org BeaglePlay is an easy to use, affordable open source
hardware single board computer based on the Texas Instruments AM625
SoC that allows you to create connected devices that work even at long
distances using IEEE 802.15.4g LR-WPAN and IEEE 802.3cg 10Base-T1L.
Expansion is provided over open standards based mikroBUS, Grove and
QWIIC headers among other interfaces.
This board family can be identified by the 24c32 eeprom:
[aa 55 33 ee 01 37 00 10 2e 00 42 45 41 47 4c 45 |.U3..7....BEAGLE|]
[50 4c 41 59 2d 41 30 2d 00 00 30 32 30 30 37 38 |PLAY-A0-..020078|]
https://beagleplay.org/
https://git.beagleboard.org/beagleplay/beagleplay
Co-developed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
---
arch/arm64/boot/dts/ti/Makefile | 1 +
.../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 753 ++++++++++++++++++
2 files changed, 754 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 6acd12409d59..09b4eafd5716 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -9,6 +9,7 @@
# alphabetically.
# Boards with AM62x SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
# Boards with AM62Ax SoC
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
new file mode 100644
index 000000000000..d1957d8fd779
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -0,0 +1,753 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://beagleplay.org/
+ *
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "k3-am625.dtsi"
+
+/ {
+ compatible = "beagle,am625-beagleplay", "ti,am625";
+ model = "BeagleBoard.org BeaglePlay";
+
+ aliases {
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ gpio0 = &main_gpio0;
+ gpio1 = &main_gpio1;
+ gpio2 = &mcu_gpio0;
+ i2c0 = &main_i2c0;
+ i2c1 = &main_i2c1;
+ i2c2 = &main_i2c2;
+ i2c3 = &main_i2c3;
+ i2c4 = &wkup_i2c0;
+ i2c5 = &mcu_i2c0;
+ mdio-gpio0 = &mdio0;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ mmc2 = &sdhci2;
+ rtc0 = &rtc;
+ rtc1 = &wkup_rtc0;
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart5;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* 2G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops@9ca00000 {
+ compatible = "ramoops";
+ reg = <0x00 0x9ca00000 0x00 0x00100000>;
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x00>;
+ pmsg-size = <0x8000>;
+ };
+
+ secure_tfa_ddr: tfa@9e780000 {
+ reg = <0x00 0x9e780000 0x00 0x80000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+
+ secure_ddr: optee@9e800000 {
+ reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+ alignment = <0x1000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9db00000 0x00 0xc00000>;
+ no-map;
+ };
+ };
+
+ vsys_5v0: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3: regulator-2 {
+ /* output of TLV62595DMQR-U12 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_5v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ wlan_en: regulator-3 {
+ /* OUTPUT of SN74AVC2T244DQMR */
+ compatible = "regulator-fixed";
+ regulator-name = "wlan_en";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&vdd_3v3>;
+ gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_en_pins_default>;
+ };
+
+ vdd_3v3_sd: regulator-4 {
+ /* output of TPS22918DBVR-U21 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_3v3_sd_pins_default>;
+
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&vdd_3v3>;
+ gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_sd_dv: regulator-5 {
+ compatible = "regulator-gpio";
+ regulator-name = "sd_hs200_switch";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_sd_dv_pins_default>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&vdd_3v3>;
+ gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ default-state = "off";
+ };
+
+ led-1 {
+ gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ default-state = "keep";
+ };
+
+ led-2 {
+ gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu";
+ function = LED_FUNCTION_CPU;
+ };
+
+ led-3 {
+ gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ led-4 {
+ gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_WLAN;
+ };
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usr_button_pins_default>;
+
+ usr: button-usr {
+ label = "User Key";
+ linux,code = <BTN_0>;
+ gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ /* Workaround for errata i2329 - just use mdio bitbang */
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio0_pins_default>;
+ gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw3g_phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ cpsw3g_phy1: ethernet-phy@1 {
+ reg = <1>;
+ reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <25>;
+ reset-deassert-us = <60000>; /* T2 */
+ };
+ };
+};
+
+&main_pmx0 {
+ gpio0_pins_default: gpio0-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
+ AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
+ AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
+ AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
+ AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
+ AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
+ AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
+ AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
+ AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
+ AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
+ AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
+ AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
+ AM62X_IOPAD(0x004c, PIN_INPUT, 7) /* (P24) GPMC0_AD4.GPIO0_19 */
+ AM62X_IOPAD(0x0050, PIN_INPUT, 7) /* (P22) GPMC0_AD5.GPIO0_20 */
+ AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
+ AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
+ >;
+ };
+
+ vdd_sd_dv_pins_default: vdd-sd-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+ >;
+ };
+
+ usr_button_pins_default: usr-button-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
+ >;
+ };
+
+ grove_pins_default: grove-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+ AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+ >;
+ };
+
+ local_i2c_pins_default: local-i2c-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+ AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+ >;
+ };
+
+ i2c2_1v8_pins_default: i2c2-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+ AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+ >;
+ };
+
+ mdio0_pins_default: mdio0-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */
+ AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */
+ >;
+ };
+
+ rgmii1_pins_default: rgmii1-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
+ AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
+ AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
+ AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
+ AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
+ AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
+ AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
+ AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
+ AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
+ AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
+ AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
+ AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+ >;
+ };
+
+ emmc_pins_default: emmc-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+ AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+ AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+ AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
+ AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
+ AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
+ AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
+ AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
+ AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
+ AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
+ >;
+ };
+
+ vdd_3v3_sd_pins_default: vdd-3v3-sd-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
+ >;
+ };
+
+ sd_pins_default: sd-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
+ AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+ AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
+ AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
+ AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
+ AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+ AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
+ >;
+ };
+
+ wifi_pins_default: wifi-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
+ AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
+ AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
+ AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
+ AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
+ AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
+ AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
+ AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
+ >;
+ };
+
+ wifi_en_pins_default: wifi-en-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
+ >;
+ };
+
+ wifi_wlirq_pins_default: wifi-wlirq-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
+ >;
+ };
+
+ spe_pins_default: spe-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
+ AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
+ AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
+ AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
+ AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
+ AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
+ AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
+ AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
+ AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
+ AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
+ AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
+ >;
+ };
+
+ mikrobus_i2c_pins_default: mikrobus-i2c-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
+ AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
+ >;
+ };
+
+ console_pins_default: console-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
+ AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+ >;
+ };
+
+ wifi_debug_uart_pins_default: wifi-debug-uart-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
+ AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
+ >;
+ };
+
+ usb1_pins_default: usb1-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
+ >;
+ };
+
+ pmic_irq_pins_default: pmic-irq-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
+ >;
+ };
+};
+
+&mcu_pmx0 {
+ i2c_qwiic_pins_default: i2c-qwiic-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
+ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
+ >;
+ };
+
+ gbe_pmx_obsclk: gbe-pmx-clk-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
+ >;
+ };
+
+ mcu_mikrobus_uart_pins_default: mcu-mikrobus-uart-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0014, PIN_INPUT, 0) /* (B5) MCU_UART0_RXD */
+ AM62X_MCU_IOPAD(0x0018, PIN_OUTPUT, 0) /* (A5) MCU_UART0_TXD */
+ >;
+ };
+
+ i2c_csi_pins_default: i2c-csi-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
+ AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
+ >;
+ };
+
+ mcu_mikrobus_rst_int_pins_default: mcu-mikrobus-rst-int-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (B4) WKUP_UART0_RXD */
+ AM62X_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (C5) WKUP_UART0_TXD */
+ >;
+ };
+
+ wifi_32k_clk: mcu-clk-out-pins-default {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
+ >;
+ };
+};
+
+&a53_opp_table {
+ /* Requires VDD_CORE to be at 0.85V */
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ };
+};
+
+&wkup_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_csi_pins_default>;
+ clock-frequency = <400000>;
+ /* Enable with overlay for camera sensor */
+};
+
+&wkup_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mikrobus_rst_int_pins_default>;
+ status = "okay";
+};
+
+&mcu_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_qwiic_pins_default>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&mcu_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mikrobus_uart_pins_default>;
+ status = "okay";
+};
+
+&usbss0 {
+ ti,vbus-divider;
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+};
+
+&usbss1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins_default>;
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins_default
+ &spe_pins_default
+ &gbe_pmx_obsclk>;
+ assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
+ assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+ phy-mode = "rmii";
+ phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+ /* Workaround for errata i2329 - Use mdio bitbang */
+ status = "disabled";
+};
+
+&main_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_pins_default>;
+ gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */
+ "USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */
+ "EEPROM_WP", /* 10 */
+ "CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */
+ "CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "", /* 13-17 */
+ "USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */
+ "", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */
+ "", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
+ "", "", "", "", "", "", "", "", "", "", "", "", /* 43-54 */
+ "", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
+ "", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
+ "", "", "", "", "", "", /* 79-84 */
+ "BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK", /* 85-86 */
+ "", "", "", "", ""; /* 87-91 */
+};
+
+&main_gpio1 {
+ gpio-line-names = "", "", "", "", "", /* 0-4 */
+ "SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7", /* 5-7 */
+ "MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9", /* 8-9 */
+ "MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11", /* 10-11 */
+ "MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0", /* 12-13 */
+ "MIKROBUS_GPIO1_14", /* 14 */
+ "", "", "", "", "VDD_3V3_SD", "", "", /* 15-21 */
+ "MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23", /* 22-23 */
+ "MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25", /* 24-25 */
+ "", "", "", "", "", "", "", "", "", "", "", "", /* 26-37 */
+ "", "", "", "", "", "", "", "", "", "", /* 38-47 */
+ "SD_CD", "SD_VOLT_SEL", "", ""; /* 48-51 */
+};
+
+&main_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&local_i2c_pins_default>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ rtc: rtc@68 {
+ compatible = "ti,bq32000";
+ reg = <0x68>;
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ tps65219: pmic@30 {
+ compatible = "ti,tps65219";
+ reg = <0x30>;
+ buck1-supply = <&vsys_5v0>;
+ buck2-supply = <&vsys_5v0>;
+ buck3-supply = <&vsys_5v0>;
+ ldo1-supply = <&vdd_3v3>;
+ ldo2-supply = <&buck2_reg>;
+ ldo3-supply = <&vdd_3v3>;
+ ldo4-supply = <&vdd_3v3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ system-power-controller;
+ ti,power-button;
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-name = "VDD_CORE";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "VDD_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /*
+ * Regulator is left as is unused, vdd_sd
+ * is controlled via GPIO with bypass config
+ * as per the NVM configuration
+ */
+ regulator-name = "VDD_SD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-allow-bypass;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "VDDA_0V85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "VDD_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&grove_pins_default>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&main_i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_1v8_pins_default>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&main_i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikrobus_i2c_pins_default>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins_default>;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+ status = "okay";
+};
+
+&sdhci1 {
+ /* SD/MMC */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pins_default>;
+
+ vmmc-supply = <&vdd_3v3_sd>;
+ vqmmc-supply = <&vdd_sd_dv>;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+ cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+ cd-debounce-delay-ms = <100>;
+ ti,fails-without-test-cd;
+ status = "okay";
+};
+
+&sdhci2 {
+ vmmc-supply = <&wlan_en>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pins_default &wifi_32k_clk>;
+ bus-width = <4>;
+ non-removable;
+ ti,fails-without-test-cd;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ ti,driver-strength-ohm = <50>;
+ assigned-clocks = <&k3_clks 157 158>;
+ assigned-clock-parents = <&k3_clks 157 160>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1807";
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_wlirq_pins_default>;
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&console_pins_default>;
+ status = "okay";
+};
+
+&main_uart1 {
+ /* Main UART1 is used by TIFS firmware */
+ status = "reserved";
+};
+
+&main_uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_debug_uart_pins_default>;
+ status = "okay";
+};
--
2.37.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-11 11:10 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-11 11:10 [PATCH 0/3] arm64: dts/defconfig/binding: Add support for BeaglePlay Nishanth Menon
2023-03-11 11:10 ` Nishanth Menon
2023-03-11 11:10 ` [PATCH 1/3] dt-bindings: arm: ti: Add bindings " Nishanth Menon
2023-03-11 11:10 ` Nishanth Menon
2023-03-11 16:00 ` Krzysztof Kozlowski
2023-03-11 16:00 ` Krzysztof Kozlowski
2023-03-13 16:00 ` Nishanth Menon
2023-03-13 16:00 ` Nishanth Menon
2023-03-11 11:10 ` Nishanth Menon [this message]
2023-03-11 11:10 ` [PATCH 2/3] arm64: dts: ti: Add k3-am625-beagleplay Nishanth Menon
2023-03-11 23:25 ` kernel test robot
2023-03-11 23:25 ` kernel test robot
2023-03-13 16:18 ` Nishanth Menon
2023-03-13 16:18 ` Nishanth Menon
2023-03-13 17:50 ` Andrew Davis
2023-03-13 17:50 ` Andrew Davis
2023-03-13 19:30 ` Nishanth Menon
2023-03-13 19:30 ` Nishanth Menon
2023-03-11 11:10 ` [PATCH 3/3] arm64: defconfig: Enable drivers for BeaglePlay Nishanth Menon
2023-03-11 11:10 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230311111022.23717-3-nm@ti.com \
--to=nm@ti.com \
--cc=arnd@arndb.de \
--cc=bb@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jkridner@gmail.com \
--cc=jpanis@baylibre.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robertcnelson@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.