[PATCH v7 1/6] arm64: defconfig: Enable audio drivers for TI K3 SoCs

[PATCH v7 1/6] arm64: defconfig: Enable audio drivers for TI K3 SoCs

[Jai Luthra]

TI's K3 platform uses McASP as the digital audio interface on the SoCs.
AM62x and AM62A based starter kits also use the TLV320AIC3106 codec with
a 3.5mm jack for analog audio input and output.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index b6e437486537..f3b004cb2500 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -920,6 +920,8 @@ CONFIG_SND_SOC_LPASS_WSA_MACRO=m
 CONFIG_SND_SOC_LPASS_VA_MACRO=m
 CONFIG_SND_SOC_LPASS_RX_MACRO=m
 CONFIG_SND_SOC_LPASS_TX_MACRO=m
+CONFIG_SND_SOC_DAVINCI_MCASP=m
+CONFIG_SND_SOC_TLV320AIC3X_I2C=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD2=m

-- 
2.40.0

[PATCH v7 1/6] arm64: defconfig: Enable audio drivers for TI K3 SoCs

[Jai Luthra]

TI's K3 platform uses McASP as the digital audio interface on the SoCs.
AM62x and AM62A based starter kits also use the TLV320AIC3106 codec with
a 3.5mm jack for analog audio input and output.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index b6e437486537..f3b004cb2500 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -920,6 +920,8 @@ CONFIG_SND_SOC_LPASS_WSA_MACRO=m
 CONFIG_SND_SOC_LPASS_VA_MACRO=m
 CONFIG_SND_SOC_LPASS_RX_MACRO=m
 CONFIG_SND_SOC_LPASS_TX_MACRO=m
+CONFIG_SND_SOC_DAVINCI_MCASP=m
+CONFIG_SND_SOC_TLV320AIC3X_I2C=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD2=m

-- 
2.40.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 2/6] arm64: dts: ti: k3-am62-main: Add McASP nodes

From: Jayesh Choudhary <j-choudhary@ti.com>

Add the nodes for McASP 0-2.

Use the audio-friendly 96MHz main_1_hsdivout6_clk as clock parent
instead of the default 100Mhz main_2_hsdivout8_clk source.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 60 ++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 16e14863d7df..b3e4857bbbe4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -832,4 +832,64 @@ epwm2: pwm@23020000 {
 		clock-names = "tbclk", "fck";
 		status = "disabled";
 	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };

-- 
2.40.0

[PATCH v7 2/6] arm64: dts: ti: k3-am62-main: Add McASP nodes

[Jai Luthra]

From: Jayesh Choudhary <j-choudhary@ti.com>

Add the nodes for McASP 0-2.

Use the audio-friendly 96MHz main_1_hsdivout6_clk as clock parent
instead of the default 100Mhz main_2_hsdivout8_clk source.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 60 ++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 16e14863d7df..b3e4857bbbe4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -832,4 +832,64 @@ epwm2: pwm@23020000 {
 		clock-names = "tbclk", "fck";
 		status = "disabled";
 	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };

-- 
2.40.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 3/6] arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK

[Jai Luthra]

Add nodes for audio codec and sound card, enable the audio serializer
(McASP1) under use from SK-AM62 E2 [1] onwards and update pinmux.

Link: https://www.ti.com/lit/zip/sprr448 [1]
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-sk.dts | 88 ++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 6bc7d63cf52f..2727a3c81e93 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -141,6 +141,52 @@ vdd_sd_dv: regulator-4 {
 			 <3300000 0x1>;
 	};
 
+	vcc_1v8: regulator-5 {
+		/* output of TPS6282518DMQ */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	tlv320_mclk: clk-0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62x-SKEVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -292,6 +338,15 @@ main_usb1_pins_default: main-usb1-pins-default {
 			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
 		>;
 	};
+
+	main_mcasp1_pins_default: main-mcasp1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24) GPMC0_BE0N_CLE.MCASP1_ACLKX */
+			AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEN.MCASP1_AXR0 */
+			AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23) GPMC0_ADVN_ALE.MCASP1_AXR2 */
+		>;
+	};
 };
 
 &wkup_uart0 {
@@ -349,6 +404,19 @@ exp1: gpio@22 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
 	};
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;	/* 2.0V */
+
+		/* Regulators */
+		AVDD-supply = <&vcc_3v3_sys>;
+		IOVDD-supply = <&vcc_3v3_sys>;
+		DRVDD-supply = <&vcc_3v3_sys>;
+		DVDD-supply = <&vcc_1v8>;
+	};
 };
 
 &sdhci0 {
@@ -406,6 +474,26 @@ cpsw3g_phy1: ethernet-phy@1 {
 	};
 };
 
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
 &mailbox0_cluster0 {
 	mbox_m4_0: mbox-m4-0 {
 		ti,mbox-rx = <0 0 0>;

-- 
2.40.0

[PATCH v7 3/6] arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK

[Jai Luthra]

Add nodes for audio codec and sound card, enable the audio serializer
(McASP1) under use from SK-AM62 E2 [1] onwards and update pinmux.

Link: https://www.ti.com/lit/zip/sprr448 [1]
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-sk.dts | 88 ++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 6bc7d63cf52f..2727a3c81e93 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -141,6 +141,52 @@ vdd_sd_dv: regulator-4 {
 			 <3300000 0x1>;
 	};
 
+	vcc_1v8: regulator-5 {
+		/* output of TPS6282518DMQ */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	tlv320_mclk: clk-0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62x-SKEVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -292,6 +338,15 @@ main_usb1_pins_default: main-usb1-pins-default {
 			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
 		>;
 	};
+
+	main_mcasp1_pins_default: main-mcasp1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24) GPMC0_BE0N_CLE.MCASP1_ACLKX */
+			AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEN.MCASP1_AXR0 */
+			AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23) GPMC0_ADVN_ALE.MCASP1_AXR2 */
+		>;
+	};
 };
 
 &wkup_uart0 {
@@ -349,6 +404,19 @@ exp1: gpio@22 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
 	};
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;	/* 2.0V */
+
+		/* Regulators */
+		AVDD-supply = <&vcc_3v3_sys>;
+		IOVDD-supply = <&vcc_3v3_sys>;
+		DRVDD-supply = <&vcc_3v3_sys>;
+		DVDD-supply = <&vcc_1v8>;
+	};
 };
 
 &sdhci0 {
@@ -406,6 +474,26 @@ cpsw3g_phy1: ethernet-phy@1 {
 	};
 };
 
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
 &mailbox0_cluster0 {
 	mbox_m4_0: mbox-m4-0 {
 		ti,mbox-rx = <0 0 0>;

-- 
2.40.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 4/6] arm64: dts: ti: k3-am62a-main: Add nodes for McASP

[Jai Luthra]

Same as AM62, AM62A has three instances of McASP which can be used for
transmitting or receiving digital audio in various formats.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 60 +++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 393a1a40b68b..50e4fcb1d678 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -660,4 +660,64 @@ ecap2: pwm@23120000 {
 		clock-names = "fck";
 		status = "disabled";
 	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };

-- 
2.40.0

[PATCH v7 4/6] arm64: dts: ti: k3-am62a-main: Add nodes for McASP

[Jai Luthra]

Same as AM62, AM62A has three instances of McASP which can be used for
transmitting or receiving digital audio in various formats.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 60 +++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 393a1a40b68b..50e4fcb1d678 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -660,4 +660,64 @@ ecap2: pwm@23120000 {
 		clock-names = "fck";
 		status = "disabled";
 	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };

-- 
2.40.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 5/6] arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators

[Jai Luthra]

VCC_3V3_MAIN is the output of LM5141-Q1, and it serves as an input to
TPS22965DSGT which produces VCC_3V3_SYS. [1]

Link: https://www.ti.com/lit/zip/sprr459 [1]
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index f6a67f072dca..2296d656323c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -77,10 +77,10 @@ vcc_5v0: regulator-1 {
 		regulator-boot-on;
 	};
 
-	vcc_3v3_sys: regulator-2 {
+	vcc_3v3_main: regulator-2 {
 		/* output of LM5141-Q1 */
 		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3_sys";
+		regulator-name = "vcc_3v3_main";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vmain_pd>;
@@ -99,6 +99,17 @@ vdd_mmc1: regulator-3 {
 		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
 	};
 
+	vcc_3v3_sys: regulator-4 {
+		/* output of TPS222965DSGT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";

-- 
2.40.0

[PATCH v7 5/6] arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators

[Jai Luthra]

VCC_3V3_MAIN is the output of LM5141-Q1, and it serves as an input to
TPS22965DSGT which produces VCC_3V3_SYS. [1]

Link: https://www.ti.com/lit/zip/sprr459 [1]
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index f6a67f072dca..2296d656323c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -77,10 +77,10 @@ vcc_5v0: regulator-1 {
 		regulator-boot-on;
 	};
 
-	vcc_3v3_sys: regulator-2 {
+	vcc_3v3_main: regulator-2 {
 		/* output of LM5141-Q1 */
 		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3_sys";
+		regulator-name = "vcc_3v3_main";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vmain_pd>;
@@ -99,6 +99,17 @@ vdd_mmc1: regulator-3 {
 		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
 	};
 
+	vcc_3v3_sys: regulator-4 {
+		/* output of TPS222965DSGT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";

-- 
2.40.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 6/6] arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A

[Jai Luthra]

Add nodes for audio codec and sound card, enable the audio serializer
(McASP1) under use and update pinmux.

The codec (TLV320AIC3106) is also supplied with a DVDD 1.8V supply from
the PMIC (TPS6593x) on the SK. [1] As the PMIC driver and devicetree
node is missing, skip describing DVDD for now and manually set the OCMV
voltage.

Link: https://www.ti.com/lit/zip/sprr459 [1]
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 77 +++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 2296d656323c..8d7087e5f9e4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -123,6 +123,41 @@ led-0 {
 			default-state = "off";
 		};
 	};
+
+	tlv320_mclk: clk-0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62Ax-SKEVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
 };
 
 &main_pmx0 {
@@ -201,6 +236,15 @@ AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */
 			AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
 		>;
 	};
+
+	main_mcasp1_pins_default: main-mcasp1-pins-default {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x090, PIN_INPUT, 2) /* (L19) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+			AM62AX_IOPAD(0x098, PIN_INPUT, 2) /* (R18) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62AX_IOPAD(0x08c, PIN_OUTPUT, 2) /* (K19) GPMC0_WEn.MCASP1_AXR0 */
+			AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+		>;
+	};
 };
 
 &main_i2c0 {
@@ -235,6 +279,19 @@ exp1: gpio@22 {
 				   "MCASP1_FET_SEL", "UART1_FET_SEL",
 				   "PD_I2C_IRQ", "IO_EXP_TEST_LED";
 	};
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;	/* 2.0V */
+		ai3x-ocmv = <1>;	/* 1.5V */
+
+		/* Regulators */
+		AVDD-supply = <&vcc_3v3_sys>;
+		IOVDD-supply = <&vcc_3v3_sys>;
+		DRVDD-supply = <&vcc_3v3_sys>;
+	};
 };
 
 &sdhci1 {
@@ -303,3 +360,23 @@ cpsw3g_phy0: ethernet-phy@0 {
 		ti,min-output-impedance;
 	};
 };
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};

-- 
2.40.0

[PATCH v7 6/6] arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A

[Jai Luthra]

Add nodes for audio codec and sound card, enable the audio serializer
(McASP1) under use and update pinmux.

The codec (TLV320AIC3106) is also supplied with a DVDD 1.8V supply from
the PMIC (TPS6593x) on the SK. [1] As the PMIC driver and devicetree
node is missing, skip describing DVDD for now and manually set the OCMV
voltage.

Link: https://www.ti.com/lit/zip/sprr459 [1]
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 77 +++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 2296d656323c..8d7087e5f9e4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -123,6 +123,41 @@ led-0 {
 			default-state = "off";
 		};
 	};
+
+	tlv320_mclk: clk-0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62Ax-SKEVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
 };
 
 &main_pmx0 {
@@ -201,6 +236,15 @@ AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */
 			AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
 		>;
 	};
+
+	main_mcasp1_pins_default: main-mcasp1-pins-default {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x090, PIN_INPUT, 2) /* (L19) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+			AM62AX_IOPAD(0x098, PIN_INPUT, 2) /* (R18) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62AX_IOPAD(0x08c, PIN_OUTPUT, 2) /* (K19) GPMC0_WEn.MCASP1_AXR0 */
+			AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+		>;
+	};
 };
 
 &main_i2c0 {
@@ -235,6 +279,19 @@ exp1: gpio@22 {
 				   "MCASP1_FET_SEL", "UART1_FET_SEL",
 				   "PD_I2C_IRQ", "IO_EXP_TEST_LED";
 	};
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;	/* 2.0V */
+		ai3x-ocmv = <1>;	/* 1.5V */
+
+		/* Regulators */
+		AVDD-supply = <&vcc_3v3_sys>;
+		IOVDD-supply = <&vcc_3v3_sys>;
+		DRVDD-supply = <&vcc_3v3_sys>;
+	};
 };
 
 &sdhci1 {
@@ -303,3 +360,23 @@ cpsw3g_phy0: ethernet-phy@0 {
 		ti,min-output-impedance;
 	};
 };
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};

-- 
2.40.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel