From: Bhavya Kapoor <b-kapoor@ti.com> To: <devicetree@vger.kernel.org>, <robh+dt@kernel.org> Cc: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v4] arm64: dts: ti: k3-j721s2: Add support for ADC nodes Date: Mon, 13 Mar 2023 16:58:34 +0530 [thread overview] Message-ID: <20230313112834.16156-1-b-kapoor@ti.com> (raw) J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes for both instances of 8 channel ADCs for J721s2 SoC. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> --- Changelog v3->v4: - add leading zeroes to reg address to match existing convention - change clock names for adc to 'fck' - remove spaces from start of line .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++ 2 files changed, 54 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index a7aa6cf08acd..3bc4f28c809f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -309,3 +309,17 @@ &mcu_mcan1 { pinctrl-0 = <&mcu_mcan1_pins_default>; phys = <&transceiver2>; }; + +&tscadc0 { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 0af242aa9816..5da5f0cf7009 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -306,4 +306,44 @@ cpts@3d000 { ti,cpts-periodic-outputs = <2>; }; }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40200000 0x00 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 0>; + assigned-clocks = <&k3_clks 0 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40210000 0x00 0x1000>; + interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 1 0>; + assigned-clocks = <&k3_clks 1 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7402>, + <&main_udmap 0x7403>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; }; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Bhavya Kapoor <b-kapoor@ti.com> To: <devicetree@vger.kernel.org>, <robh+dt@kernel.org> Cc: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v4] arm64: dts: ti: k3-j721s2: Add support for ADC nodes Date: Mon, 13 Mar 2023 16:58:34 +0530 [thread overview] Message-ID: <20230313112834.16156-1-b-kapoor@ti.com> (raw) J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes for both instances of 8 channel ADCs for J721s2 SoC. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> --- Changelog v3->v4: - add leading zeroes to reg address to match existing convention - change clock names for adc to 'fck' - remove spaces from start of line .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++ 2 files changed, 54 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index a7aa6cf08acd..3bc4f28c809f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -309,3 +309,17 @@ &mcu_mcan1 { pinctrl-0 = <&mcu_mcan1_pins_default>; phys = <&transceiver2>; }; + +&tscadc0 { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 0af242aa9816..5da5f0cf7009 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -306,4 +306,44 @@ cpts@3d000 { ti,cpts-periodic-outputs = <2>; }; }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40200000 0x00 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 0>; + assigned-clocks = <&k3_clks 0 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40210000 0x00 0x1000>; + interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 1 0>; + assigned-clocks = <&k3_clks 1 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7402>, + <&main_udmap 0x7403>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; }; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-03-13 11:28 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-03-13 11:28 Bhavya Kapoor [this message] 2023-03-13 11:28 ` [PATCH v4] arm64: dts: ti: k3-j721s2: Add support for ADC nodes Bhavya Kapoor 2023-03-13 17:05 ` Nishanth Menon 2023-03-13 17:05 ` Nishanth Menon 2023-03-14 9:41 ` Bhavya Kapoor
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230313112834.16156-1-b-kapoor@ti.com \ --to=b-kapoor@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.