* [PATCH v4 1/5] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
@ 2023-03-28 7:48 ` Herve Codina
2023-03-28 8:06 ` Krzysztof Kozlowski
2023-03-28 7:48 ` Herve Codina via Alsa-devel
` (8 subsequent siblings)
9 siblings, 1 reply; 12+ messages in thread
From: Herve Codina @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
.../bindings/mfd/lantiq,pef2256.yaml | 270 ++++++++++++++++++
1 file changed, 270 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
diff --git a/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
new file mode 100644
index 000000000000..e2c2959a21f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/lantiq,pef2256.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq PEF2256
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+description:
+ The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
+ line interface component designed to fulfill all required interfacing between
+ an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
+
+properties:
+ compatible:
+ items:
+ - const: lantiq,pef2256
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Master clock
+ - description: Receive System Clock
+ - description: Transmit System Clock
+
+ clock-names:
+ items:
+ - const: mclk
+ - const: sclkr
+ - const: sclkx
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ GPIO used to reset the device.
+ maxItems: 1
+
+ pinctrl:
+ $ref: /schemas/pinctrl/pinctrl.yaml#
+
+ patternProperties:
+ '-pins$':
+ type: object
+ $ref: /schemas/pinctrl/pincfg-node.yaml#
+
+ properties:
+ pins:
+ enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
+
+ function:
+ enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
+ SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
+ GPI, GPOH, GPOL ]
+
+ additionalProperties: false
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+ lantiq,line-interface:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [e1, t1j1]
+ default: e1
+ description: |
+ The line interface type
+ - e1: E1 line
+ - t1j1: T1/J1 line
+
+ lantiq,frame-format:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ The line interface frame format.
+
+ lantiq,data-rate-bps:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2048000, 4096000, 8192000, 16384000]
+ default: 2048000
+ description:
+ Data rate (bit per seconds) on the system highway.
+
+ lantiq,clock-falling-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Data is sent on falling edge of the clock (and received on the rising
+ edge). If 'clock-falling-edge' is not present, data is sent on the
+ rising edge (and received on the falling edge).
+
+ lantiq,channel-phase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 0
+ description:
+ The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit
+ time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data
+ rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
+ bit/s, the data (all 32 8bit) present in the frame are interleave with
+ unused time-slots. The lantiq,channel-phase property allows to set the
+ correct alignment of the interleave mechanism.
+ For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
+ lantiq,channel-phase = 2, the interleave schema with unused time-slots
+ (nu) and used time-slots (XX) for TSi is
+ nu nu XX nu nu nu XX nu nu nu XX nu
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+ With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
+ interleave schema is
+ nu XX nu nu nu XX nu nu nu XX nu nu
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+ With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
+ lantiq,channel-phase = 1, the interleave schema is
+ nu XX nu XX nu XX
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+
+ lantiq,subordinate:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If present, the pef2256 works in subordinate mode. In this mode it
+ synchronizes on line interface clock signals. Otherwise, it synchronizes
+ on internal clocks.
+
+patternProperties:
+ '^codec([0-9]|[1-2][0-9]|3[0-1])?$':
+ type: object
+ $ref: /schemas/sound/dai-common.yaml
+ description:
+ Codec provided by the pef2256. This codec allows to use some of the PCM
+ system highway time-slots as audio channels to transport audio data over
+ the E1/T1/J1 lines.
+ The time-slots used by the codec must be set and so, the properties
+ 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+ 'dai-tdm-slot-rx-mask' must be present in the sound card node for
+ sub-nodes that involve the codec. The codec uses 8bit time-slots.
+ 'dai-tdm-tdm-slot-with' must be set to 8.
+ The tx and rx masks define the pef2256 time-slots assigned to the codec.
+
+ properties:
+ compatible:
+ const: lantiq,pef2256-codec
+
+ '#sound-dai-cells':
+ const: 0
+
+ required:
+ - compatible
+ - '#sound-dai-cells'
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+allOf:
+ - if:
+ properties:
+ lantiq,line-interface:
+ contains:
+ const: e1
+ then:
+ properties:
+ lantiq,frame-format:
+ enum: [doubleframe, crc4-multiframe, auto-multiframe]
+ default: doubleframe
+ description: |
+ The E1 line interface frame format
+ - doubleframe: Doubleframe format
+ - crc4-multiframe: CRC4 multiframe format
+ - auto-multiframe: CRC4 multiframe format with interworking
+ capabilities (ITU-T G.706 Annex B)
+
+ else:
+ # T1/J1 line
+ properties:
+ lantiq,frame-format:
+ enum: [4frame, 12frame, 24frame, 72frame]
+ default: 12frame
+ description: |
+ The T1/J1 line interface frame format
+ - 4frame: 4-frame multiframe format (F4)
+ - 12frame: 12-frame multiframe format (F12, D3/4)
+ - 24frame: 24-frame multiframe format (ESF)
+ - 72frame: 72-frame multiframe format (F72, remote switch mode)
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ framer@2000000 {
+ compatible = "lantiq,pef2256", "simple-mfd";
+ reg = <0x2000000 0x100>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&intc>;
+ clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
+ clock-names = "mclk", "sclkr", "sclkx";
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ lantiq,data-rate-bps = <4096000>;
+
+ pinctrl {
+ pef2256_rpa_sypr: rpa-pins {
+ pins = "RPA";
+ function = "SYPR";
+ };
+ pef2256_xpa_sypx: xpa-pins {
+ pins = "XPA";
+ function = "SYPX";
+ };
+ };
+
+ pef2256_codec0: codec0 {
+ compatible = "lantiq,pef2256-codec";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PEF2256_0";
+ };
+
+ pef2256_codec1: codec1 {
+ compatible = "lantiq,pef2256-codec";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PEF2256_1";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */
+ reg = <0>;
+ cpu {
+ sound-dai = <&cpu_dai1>;
+ };
+ codec {
+ sound-dai = <&pef2256_codec0>;
+ dai-tdm-slot-num = <4>;
+ dai-tdm-slot-width = <8>;
+ /* TS 1, 2, 3, 4 */
+ dai-tdm-slot-tx-mask = <0 1 1 1 1>;
+ dai-tdm-slot-rx-mask = <0 1 1 1 1>;
+ };
+ };
+ simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */
+ reg = <1>;
+ cpu {
+ sound-dai = <&cpu_dai2>;
+ };
+ codec {
+ sound-dai = <&pef2256_codec1>;
+ dai-tdm-slot-num = <4>;
+ dai-tdm-slot-width = <8>;
+ /* TS 5, 6, 7, 8 */
+ dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>;
+ dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>;
+ };
+ };
+ };
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v4 1/5] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer
2023-03-28 7:48 ` [PATCH v4 1/5] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer Herve Codina
@ 2023-03-28 8:06 ` Krzysztof Kozlowski
0 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2023-03-28 8:06 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
On 28/03/2023 09:48, Herve Codina wrote:
> The Lantiq PEF2256 is a framer and line interface component designed to
> fulfill all required interfacing between an analog E1/T1/J1 line and the
> digital PCM system highway/H.100 bus.
>
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> ---
> .../bindings/mfd/lantiq,pef2256.yaml | 270 ++++++++++++++++++
> 1 file changed, 270 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
> + pinctrl:
> + $ref: /schemas/pinctrl/pinctrl.yaml#
> +
> + patternProperties:
> + '-pins$':
> + type: object
> + $ref: /schemas/pinctrl/pincfg-node.yaml#
> +
> + properties:
> + pins:
> + enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
> +
> + function:
> + enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
> + SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
> + GPI, GPOH, GPOL ]
> +
> + additionalProperties: false
Move it up (Put it after $ref: /schemas/pinctrl/pincfg-node.yaml#)
> +
> + required:
> + - pins
> + - function
> +
> + additionalProperties: false
Put it after $ref
> +
> + lantiq,line-interface:
> + $ref: /schemas/types.yaml#/definitions/string
> + enum: [e1, t1j1]
> + default: e1
> + description: |
> + The line interface type
> + - e1: E1 line
> + - t1j1: T1/J1 line
> +
> + lantiq,frame-format:
> + $ref: /schemas/types.yaml#/definitions/string
> + description:
> + The line interface frame format.
> +
> + lantiq,data-rate-bps:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [2048000, 4096000, 8192000, 16384000]
> + default: 2048000
> + description:
> + Data rate (bit per seconds) on the system highway.
> +
> + lantiq,clock-falling-edge:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Data is sent on falling edge of the clock (and received on the rising
> + edge). If 'clock-falling-edge' is not present, data is sent on the
> + rising edge (and received on the falling edge).
> +
> + lantiq,channel-phase:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3, 4, 5, 6, 7]
> + default: 0
> + description:
> + The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit
> + time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data
> + rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
> + bit/s, the data (all 32 8bit) present in the frame are interleave with
> + unused time-slots. The lantiq,channel-phase property allows to set the
> + correct alignment of the interleave mechanism.
> + For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
> + lantiq,channel-phase = 2, the interleave schema with unused time-slots
> + (nu) and used time-slots (XX) for TSi is
> + nu nu XX nu nu nu XX nu nu nu XX nu
> + <-- TSi --> <- TSi+1 -> <- TSi+2 ->
> + With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
> + interleave schema is
> + nu XX nu nu nu XX nu nu nu XX nu nu
> + <-- TSi --> <- TSi+1 -> <- TSi+2 ->
> + With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
> + lantiq,channel-phase = 1, the interleave schema is
> + nu XX nu XX nu XX
> + <-- TSi --> <- TSi+1 -> <- TSi+2 ->
> +
> + lantiq,subordinate:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + If present, the pef2256 works in subordinate mode. In this mode it
> + synchronizes on line interface clock signals. Otherwise, it synchronizes
> + on internal clocks.
> +
> +patternProperties:
> + '^codec([0-9]|[1-2][0-9]|3[0-1])?$':
Missing '-' before suffix numbers.
> + type: object
> + $ref: /schemas/sound/dai-common.yaml
> + description:
> + Codec provided by the pef2256. This codec allows to use some of the PCM
> + system highway time-slots as audio channels to transport audio data over
> + the E1/T1/J1 lines.
> + The time-slots used by the codec must be set and so, the properties
> + 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
> + 'dai-tdm-slot-rx-mask' must be present in the sound card node for
> + sub-nodes that involve the codec. The codec uses 8bit time-slots.
> + 'dai-tdm-tdm-slot-with' must be set to 8.
> + The tx and rx masks define the pef2256 time-slots assigned to the codec.
> +
> + properties:
> + compatible:
> + const: lantiq,pef2256-codec
> +
> + '#sound-dai-cells':
> + const: 0
> +
> + required:
> + - compatible
> + - '#sound-dai-cells'
> +
> + unevaluatedProperties: false
Put it after $ref
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - interrupts
> +
> +allOf:
> + - if:
> + properties:
> + lantiq,line-interface:
> + contains:
> + const: e1
> + then:
> + properties:
> + lantiq,frame-format:
> + enum: [doubleframe, crc4-multiframe, auto-multiframe]
> + default: doubleframe
> + description: |
> + The E1 line interface frame format
> + - doubleframe: Doubleframe format
> + - crc4-multiframe: CRC4 multiframe format
> + - auto-multiframe: CRC4 multiframe format with interworking
> + capabilities (ITU-T G.706 Annex B)
> +
> + else:
> + # T1/J1 line
> + properties:
> + lantiq,frame-format:
> + enum: [4frame, 12frame, 24frame, 72frame]
> + default: 12frame
> + description: |
> + The T1/J1 line interface frame format
> + - 4frame: 4-frame multiframe format (F4)
> + - 12frame: 12-frame multiframe format (F12, D3/4)
> + - 24frame: 24-frame multiframe format (ESF)
> + - 72frame: 72-frame multiframe format (F72, remote switch mode)
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + framer@2000000 {
> + compatible = "lantiq,pef2256", "simple-mfd";
> + reg = <0x2000000 0x100>;
> + interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-parent = <&intc>;
> + clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
> + clock-names = "mclk", "sclkr", "sclkx";
> + reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
> + lantiq,data-rate-bps = <4096000>;
> +
> + pinctrl {
> + pef2256_rpa_sypr: rpa-pins {
> + pins = "RPA";
> + function = "SYPR";
> + };
> + pef2256_xpa_sypx: xpa-pins {
> + pins = "XPA";
> + function = "SYPX";
> + };
> + };
> +
> + pef2256_codec0: codec0 {
codec-0
> + compatible = "lantiq,pef2256-codec";
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "PEF2256_0";
> + };
> +
> + pef2256_codec1: codec1 {
codec-1
> + compatible = "lantiq,pef2256-codec";
> + #sound-dai-cells = <0>;
> + sound-name-prefix = "PEF2256_1";
> + };
> + };
> +
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 1/5] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
2023-03-28 7:48 ` [PATCH v4 1/5] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer Herve Codina
@ 2023-03-28 7:48 ` Herve Codina via Alsa-devel
2023-03-28 7:48 ` [PATCH v4 2/5] mfd: Add support for the Lantiq PEF2256 framer Herve Codina
` (7 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Herve Codina via Alsa-devel @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
[-- Attachment #0: Type: message/rfc822, Size: 13022 bytes --]
From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>, Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Christophe Leroy <christophe.leroy@csgroup.eu>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v4 1/5] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer
Date: Tue, 28 Mar 2023 09:48:07 +0200
Message-ID: <20230328074811.594361-2-herve.codina@bootlin.com>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
.../bindings/mfd/lantiq,pef2256.yaml | 270 ++++++++++++++++++
1 file changed, 270 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
diff --git a/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
new file mode 100644
index 000000000000..e2c2959a21f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/lantiq,pef2256.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq PEF2256
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+description:
+ The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
+ line interface component designed to fulfill all required interfacing between
+ an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
+
+properties:
+ compatible:
+ items:
+ - const: lantiq,pef2256
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Master clock
+ - description: Receive System Clock
+ - description: Transmit System Clock
+
+ clock-names:
+ items:
+ - const: mclk
+ - const: sclkr
+ - const: sclkx
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ GPIO used to reset the device.
+ maxItems: 1
+
+ pinctrl:
+ $ref: /schemas/pinctrl/pinctrl.yaml#
+
+ patternProperties:
+ '-pins$':
+ type: object
+ $ref: /schemas/pinctrl/pincfg-node.yaml#
+
+ properties:
+ pins:
+ enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
+
+ function:
+ enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
+ SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
+ GPI, GPOH, GPOL ]
+
+ additionalProperties: false
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+ lantiq,line-interface:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [e1, t1j1]
+ default: e1
+ description: |
+ The line interface type
+ - e1: E1 line
+ - t1j1: T1/J1 line
+
+ lantiq,frame-format:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ The line interface frame format.
+
+ lantiq,data-rate-bps:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2048000, 4096000, 8192000, 16384000]
+ default: 2048000
+ description:
+ Data rate (bit per seconds) on the system highway.
+
+ lantiq,clock-falling-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Data is sent on falling edge of the clock (and received on the rising
+ edge). If 'clock-falling-edge' is not present, data is sent on the
+ rising edge (and received on the falling edge).
+
+ lantiq,channel-phase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 0
+ description:
+ The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit
+ time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data
+ rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
+ bit/s, the data (all 32 8bit) present in the frame are interleave with
+ unused time-slots. The lantiq,channel-phase property allows to set the
+ correct alignment of the interleave mechanism.
+ For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
+ lantiq,channel-phase = 2, the interleave schema with unused time-slots
+ (nu) and used time-slots (XX) for TSi is
+ nu nu XX nu nu nu XX nu nu nu XX nu
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+ With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
+ interleave schema is
+ nu XX nu nu nu XX nu nu nu XX nu nu
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+ With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
+ lantiq,channel-phase = 1, the interleave schema is
+ nu XX nu XX nu XX
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+
+ lantiq,subordinate:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If present, the pef2256 works in subordinate mode. In this mode it
+ synchronizes on line interface clock signals. Otherwise, it synchronizes
+ on internal clocks.
+
+patternProperties:
+ '^codec([0-9]|[1-2][0-9]|3[0-1])?$':
+ type: object
+ $ref: /schemas/sound/dai-common.yaml
+ description:
+ Codec provided by the pef2256. This codec allows to use some of the PCM
+ system highway time-slots as audio channels to transport audio data over
+ the E1/T1/J1 lines.
+ The time-slots used by the codec must be set and so, the properties
+ 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+ 'dai-tdm-slot-rx-mask' must be present in the sound card node for
+ sub-nodes that involve the codec. The codec uses 8bit time-slots.
+ 'dai-tdm-tdm-slot-with' must be set to 8.
+ The tx and rx masks define the pef2256 time-slots assigned to the codec.
+
+ properties:
+ compatible:
+ const: lantiq,pef2256-codec
+
+ '#sound-dai-cells':
+ const: 0
+
+ required:
+ - compatible
+ - '#sound-dai-cells'
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+allOf:
+ - if:
+ properties:
+ lantiq,line-interface:
+ contains:
+ const: e1
+ then:
+ properties:
+ lantiq,frame-format:
+ enum: [doubleframe, crc4-multiframe, auto-multiframe]
+ default: doubleframe
+ description: |
+ The E1 line interface frame format
+ - doubleframe: Doubleframe format
+ - crc4-multiframe: CRC4 multiframe format
+ - auto-multiframe: CRC4 multiframe format with interworking
+ capabilities (ITU-T G.706 Annex B)
+
+ else:
+ # T1/J1 line
+ properties:
+ lantiq,frame-format:
+ enum: [4frame, 12frame, 24frame, 72frame]
+ default: 12frame
+ description: |
+ The T1/J1 line interface frame format
+ - 4frame: 4-frame multiframe format (F4)
+ - 12frame: 12-frame multiframe format (F12, D3/4)
+ - 24frame: 24-frame multiframe format (ESF)
+ - 72frame: 72-frame multiframe format (F72, remote switch mode)
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ framer@2000000 {
+ compatible = "lantiq,pef2256", "simple-mfd";
+ reg = <0x2000000 0x100>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&intc>;
+ clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
+ clock-names = "mclk", "sclkr", "sclkx";
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ lantiq,data-rate-bps = <4096000>;
+
+ pinctrl {
+ pef2256_rpa_sypr: rpa-pins {
+ pins = "RPA";
+ function = "SYPR";
+ };
+ pef2256_xpa_sypx: xpa-pins {
+ pins = "XPA";
+ function = "SYPX";
+ };
+ };
+
+ pef2256_codec0: codec0 {
+ compatible = "lantiq,pef2256-codec";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PEF2256_0";
+ };
+
+ pef2256_codec1: codec1 {
+ compatible = "lantiq,pef2256-codec";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PEF2256_1";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */
+ reg = <0>;
+ cpu {
+ sound-dai = <&cpu_dai1>;
+ };
+ codec {
+ sound-dai = <&pef2256_codec0>;
+ dai-tdm-slot-num = <4>;
+ dai-tdm-slot-width = <8>;
+ /* TS 1, 2, 3, 4 */
+ dai-tdm-slot-tx-mask = <0 1 1 1 1>;
+ dai-tdm-slot-rx-mask = <0 1 1 1 1>;
+ };
+ };
+ simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */
+ reg = <1>;
+ cpu {
+ sound-dai = <&cpu_dai2>;
+ };
+ codec {
+ sound-dai = <&pef2256_codec1>;
+ dai-tdm-slot-num = <4>;
+ dai-tdm-slot-width = <8>;
+ /* TS 5, 6, 7, 8 */
+ dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>;
+ dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>;
+ };
+ };
+ };
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 2/5] mfd: Add support for the Lantiq PEF2256 framer
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
2023-03-28 7:48 ` [PATCH v4 1/5] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer Herve Codina
2023-03-28 7:48 ` Herve Codina via Alsa-devel
@ 2023-03-28 7:48 ` Herve Codina
2023-03-28 7:48 ` Herve Codina via Alsa-devel
` (6 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Herve Codina @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
drivers/mfd/Kconfig | 17 +
drivers/mfd/Makefile | 1 +
drivers/mfd/pef2256.c | 1355 +++++++++++++++++++++++++++++++++++
include/linux/mfd/pef2256.h | 28 +
4 files changed, 1401 insertions(+)
create mode 100644 drivers/mfd/pef2256.c
create mode 100644 include/linux/mfd/pef2256.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fcc141e067b9..74c3750d21e4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1063,6 +1063,23 @@ config PCF50633_GPIO
Say yes here if you want to include support GPIO for pins on
the PCF50633 chip.
+config MFD_PEF2256
+ tristate "Lantiq PEF2256 (FALC56) framer"
+ depends on OF
+ select PINCTRL
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ This option enables support for the Lantiq PEF2256 framer, also known
+ as FALC56. This framer and its line interface component is designed
+ to fulfill all required interfacing between analog E1/T1/J1 lines and
+ the digital PCM system highway.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pef2256.
+
config MFD_PM8XXX
tristate "Qualcomm PM8xxx PMIC chips driver"
depends on (ARM || HEXAGON || COMPILE_TEST)
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2f6c89d1e277..b2bb6e6a141c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -195,6 +195,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
+obj-$(CONFIG_MFD_PEF2256) += pef2256.o
obj-$(CONFIG_MFD_PM8XXX) += qcom-pm8xxx.o ssbi.o
obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
diff --git a/drivers/mfd/pef2256.c b/drivers/mfd/pef2256.c
new file mode 100644
index 000000000000..1a3896c2edcf
--- /dev/null
+++ b/drivers/mfd/pef2256.c
@@ -0,0 +1,1355 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PEF2256 also known as FALC56 driver
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#include <linux/mfd/pef2256.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define PEF2256_CMDR 0x02 /* Command Register */
+#define PEF2256_CMDR_RRES BIT(6)
+#define PEF2256_CMDR_XRES BIT(4)
+#define PEF2256_CMDR_SRES BIT(0)
+#define PEF2256_IMR0 0x14 /* Interrupt Mask Register 0 */
+#define PEF2256_IMR1 0x15 /* Interrupt Mask Register 1 */
+#define PEF2256_IMR2 0x16 /* Interrupt Mask Register 2 */
+#define PEF2256_IMR3 0x17 /* Interrupt Mask Register 3 */
+#define PEF2256_IMR4 0x18 /* Interrupt Mask Register 4 */
+#define PEF2256_IMR5 0x19 /* Interrupt Mask Register 5 */
+#define PEF2256_FMR0 0x1C /* Framer Mode Register 0 */
+#define PEF2256_FMR0_XC_MASK (0x3 << 6)
+#define PEF2256_FMR0_XC_NRZ (0x0 << 6)
+#define PEF2256_FMR0_XC_CMI (0x1 << 6)
+#define PEF2256_FMR0_XC_AMI (0x2 << 6)
+#define PEF2256_FMR0_XC_HDB3 (0x3 << 6)
+#define PEF2256_FMR0_RC_MASK (0x3 << 4)
+#define PEF2256_FMR0_RC_NRZ (0x0 << 4)
+#define PEF2256_FMR0_RC_CMI (0x1 << 4)
+#define PEF2256_FMR0_RC_AMI (0x2 << 4)
+#define PEF2256_FMR0_RC_HDB3 (0x3 << 4)
+#define PEF2256_FMR1 0x1D /* Framer Mode Register 1 */
+#define PEF2256_FMR1_XFS BIT(3)
+#define PEF2256_FMR1_ECM BIT(2)
+/* SSD is defined on 2 bits. The other bit is on SIC1 register */
+#define PEF2256_FMR1_SSD_MASK BIT(1)
+#define PEF2256_FMR1_SSD_2048 0
+#define PEF2256_FMR1_SSD_4096 BIT(1)
+#define PEF2256_FMR1_SSD_8192 0
+#define PEF2256_FMR1_SSD_16384 BIT(1)
+#define PEF2256_FMR2 0x1E /* Framer Mode Register 2 */
+#define PEF2256_FMR2_RFS_MASK (0x3 << 6)
+#define PEF2256_FMR2_RFS_DOUBLEFRAME (0x0 << 6)
+#define PEF2256_FMR2_RFS_CRC4_MULTIFRAME (0x2 << 6)
+#define PEF2256_FMR2_RFS_AUTO_MULTIFRAME (0x3 << 6)
+#define PEF2256_FMR2_AXRA BIT(1)
+#define PEF2256_LOOP 0x1F /* Channel Loop-Back */
+#define PEF2256_XSW 0x20 /* Transmit Service Word */
+#define PEF2256_XSW_XSIS BIT(7)
+#define PEF2256_XSW_XTM BIT(6)
+#define PEF2256_XSW_XY_MASK (0x1f << 0)
+#define PEF2256_XSW_XY(_v) ((_v) & 0x1f)
+#define PEF2256_XSP 0x21 /* Transmit Spare Bits */
+#define PEF2256_XSP_XSIF BIT(2)
+#define PEF2256_XC0 0x22 /* Transmit Control 0 */
+#define PEF2256_XC1 0x23 /* Transmit Control 1 */
+#define PEF2256_RC0 0x24 /* Receive Control 0 */
+#define PEF2256_RC0_SWD BIT(7)
+#define PEF2256_RC0_ASY4 BIT(6)
+#define PEF2256_RC1 0x25 /* Receive Control 1 */
+#define PEF2256_XPM0 0x26 /* Transmit Pulse Mask 0 */
+#define PEF2256_XPM1 0x27 /* Transmit Pulse Mask 1 */
+#define PEF2256_XPM2 0x28 /* Transmit Pulse Mask 2 */
+#define PEF2256_XPM2_XLT BIT(6)
+#define PEF2256_TSWM 0x29 /* Transparent Service Word Mask */
+#define PEF2256_LIM0 0x36 /* Line Interface Mode 0 */
+#define PEF2256_2X_LIM0_BIT3 BIT(3) /* v2.x, described as a forced '1' bit */
+#define PEF2256_LIM0_MAS BIT(0)
+#define PEF2256_LIM1 0x37 /* Line Interface Mode 1 */
+#define PEF2256_12_LIM1_RIL_MASK (0x7 << 4)
+#define PEF2256_12_LIM1_RIL_910 (0x0 << 4)
+#define PEF2256_12_LIM1_RIL_740 (0x1 << 4)
+#define PEF2256_12_LIM1_RIL_590 (0x2 << 4)
+#define PEF2256_12_LIM1_RIL_420 (0x3 << 4)
+#define PEF2256_12_LIM1_RIL_320 (0x4 << 4)
+#define PEF2256_12_LIM1_RIL_210 (0x5 << 4)
+#define PEF2256_12_LIM1_RIL_160 (0x6 << 4)
+#define PEF2256_12_LIM1_RIL_100 (0x7 << 4)
+#define PEF2256_2X_LIM1_RIL_MASK (0x7 << 4)
+#define PEF2256_2X_LIM1_RIL_2250 (0x0 << 4)
+#define PEF2256_2X_LIM1_RIL_1100 (0x1 << 4)
+#define PEF2256_2X_LIM1_RIL_600 (0x2 << 4)
+#define PEF2256_2X_LIM1_RIL_350 (0x3 << 4)
+#define PEF2256_2X_LIM1_RIL_210 (0x4 << 4)
+#define PEF2256_2X_LIM1_RIL_140 (0x5 << 4)
+#define PEF2256_2X_LIM1_RIL_100 (0x6 << 4)
+#define PEF2256_2X_LIM1_RIL_50 (0x7 << 4)
+#define PEF2256_PCD 0x38 /* Pulse Count Detection */
+#define PEF2256_PCR 0x39 /* Pulse Count Recovery */
+#define PEF2256_LIM2 0x3A /* Line Interface Mode 2 */
+#define PEF2256_LIM2_SLT_MASK (0x3 << 4)
+#define PEF2256_LIM2_SLT_THR55 (0x0 << 4)
+#define PEF2256_LIM2_SLT_THR67 (0x1 << 4)
+#define PEF2256_LIM2_SLT_THR50 (0x2 << 4)
+#define PEF2256_LIM2_SLT_THR45 (0x3 << 4)
+#define PEF2256_LIM2_ELT BIT(2)
+#define PEF2256_SIC1 0x3E /* System Interface Control 1 */
+#define PEF2256_SIC1_SSC_MASK (BIT(7) | BIT(3))
+#define PEF2256_SIC1_SSC_2048 (0)
+#define PEF2256_SIC1_SSC_4096 BIT(3)
+#define PEF2256_SIC1_SSC_8192 BIT(7)
+#define PEF2256_SIC1_SSC_16384 (BIT(7) | BIT(3))
+/* SSD is defined on 2 bits. The other bit is on FMR1 register */
+#define PEF2256_SIC1_SSD_MASK BIT(6)
+#define PEF2256_SIC1_SSD_2048 0
+#define PEF2256_SIC1_SSD_4096 0
+#define PEF2256_SIC1_SSD_8192 BIT(6)
+#define PEF2256_SIC1_SSD_16384 BIT(6)
+#define PEF2256_SIC1_RBS_MASK (0x3 << 4)
+#define PEF2256_SIC1_RBS_2FRAMES (0x0 << 4)
+#define PEF2256_SIC1_RBS_1FRAME (0x1 << 4)
+#define PEF2256_SIC1_RBS_96BITS (0x2 << 4)
+#define PEF2256_SIC1_RBS_BYPASS (0x3 << 4)
+#define PEF2256_SIC1_XBS_MASK (0x3 << 0)
+#define PEF2256_SIC1_XBS_BYPASS (0x0 << 0)
+#define PEF2256_SIC1_XBS_1FRAME (0x1 << 0)
+#define PEF2256_SIC1_XBS_2FRAMES (0x2 << 0)
+#define PEF2256_SIC1_XBS_96BITS (0x3 << 0)
+#define PEF2256_SIC2 0x3F /* System Interface Control 2 */
+#define PEF2256_SIC2_SICS_MASK (0x7 << 1)
+#define PEF2256_SIC2_SICS(_v) ((_v) << 1)
+#define PEF2256_SIC3 0x40 /* System Interface Control 3 */
+#define PEF2256_SIC3_RTRI BIT(5)
+#define PEF2256_SIC3_RESX BIT(3)
+#define PEF2256_SIC3_RESR BIT(2)
+#define PEF2256_CMR1 0x44 /* Clock Mode Register 1 */
+#define PEF2256_CMR1_RS_MASK (0x3 << 4)
+#define PEF2256_CMR1_RS_DPLL (0x0 << 4)
+#define PEF2256_CMR1_RS_DPLL_LOS_HIGH (0x1 << 4)
+#define PEF2256_CMR1_RS_DCOR_2048 (0x2 << 4)
+#define PEF2256_CMR1_RS_DCOR_8192 (0x3 << 4)
+#define PEF2256_CMR1_DCS BIT(3)
+#define PEF2256_CMR2 0x45 /* Clock Mode Register 2 */
+#define PEF2256_CMR2_DCOXC BIT(5)
+#define PEF2256_GCR 0x46 /* Global Configuration Register */
+#define PEF2256_GCR_SCI BIT(6)
+#define PEF2256_GCR_ECMC BIT(4)
+#define PEF2256_PC1 0x80 /* Port Configuration 1 */
+#define PEF2256_PC2 0x81 /* Port Configuration 2 */
+#define PEF2256_PC3 0x82 /* Port Configuration 3 */
+#define PEF2256_PC4 0x83 /* Port Configuration 4 */
+#define PEF2256_12_PC_RPC_MASK (0x7 << 4)
+#define PEF2256_12_PC_RPC_SYPR (0x0 << 4)
+#define PEF2256_12_PC_RPC_RFM (0x1 << 4)
+#define PEF2256_12_PC_RPC_RFMB (0x2 << 4)
+#define PEF2256_12_PC_RPC_RSIGM (0x3 << 4)
+#define PEF2256_12_PC_RPC_RSIG (0x4 << 4)
+#define PEF2256_12_PC_RPC_DLR (0x5 << 4)
+#define PEF2256_12_PC_RPC_FREEZE (0x6 << 4)
+#define PEF2256_12_PC_RPC_RFSP (0x7 << 4)
+#define PEF2256_12_PC_XPC_MASK (0xf << 0)
+#define PEF2256_12_PC_XPC_SYPX (0x0 << 0)
+#define PEF2256_12_PC_XPC_XFMS (0x1 << 0)
+#define PEF2256_12_PC_XPC_XSIG (0x2 << 0)
+#define PEF2256_12_PC_XPC_TCLK (0x3 << 0)
+#define PEF2256_12_PC_XPC_XMFB (0x4 << 0)
+#define PEF2256_12_PC_XPC_XSIGM (0x5 << 0)
+#define PEF2256_12_PC_XPC_DLX (0x6 << 0)
+#define PEF2256_12_PC_XPC_XCLK (0x7 << 0)
+#define PEF2256_12_PC_XPC_XLT (0x8 << 0)
+#define PEF2256_2X_PC_RPC_MASK (0xf << 4)
+#define PEF2256_2X_PC_RPC_SYPR (0x0 << 4)
+#define PEF2256_2X_PC_RPC_RFM (0x1 << 4)
+#define PEF2256_2X_PC_RPC_RFMB (0x2 << 4)
+#define PEF2256_2X_PC_RPC_RSIGM (0x3 << 4)
+#define PEF2256_2X_PC_RPC_RSIG (0x4 << 4)
+#define PEF2256_2X_PC_RPC_DLR (0x5 << 4)
+#define PEF2256_2X_PC_RPC_FREEZE (0x6 << 4)
+#define PEF2256_2X_PC_RPC_RFSP (0x7 << 4)
+#define PEF2256_2X_PC_RPC_GPI (0x9 << 4)
+#define PEF2256_2X_PC_RPC_GPOH (0xa << 4)
+#define PEF2256_2X_PC_RPC_GPOL (0xb << 4)
+#define PEF2256_2X_PC_RPC_LOS (0xc << 4)
+#define PEF2256_2X_PC_XPC_MASK (0xf << 0)
+#define PEF2256_2X_PC_XPC_SYPX (0x0 << 0)
+#define PEF2256_2X_PC_XPC_XFMS (0x1 << 0)
+#define PEF2256_2X_PC_XPC_XSIG (0x2 << 0)
+#define PEF2256_2X_PC_XPC_TCLK (0x3 << 0)
+#define PEF2256_2X_PC_XPC_XMFB (0x4 << 0)
+#define PEF2256_2X_PC_XPC_XSIGM (0x5 << 0)
+#define PEF2256_2X_PC_XPC_DLX (0x6 << 0)
+#define PEF2256_2X_PC_XPC_XCLK (0x7 << 0)
+#define PEF2256_2X_PC_XPC_XLT (0x8 << 0)
+#define PEF2256_2X_PC_XPC_GPI (0x9 << 0)
+#define PEF2256_2X_PC_XPC_GPOH (0xa << 0)
+#define PEF2256_2X_PC_XPC_GPOL (0xb << 0)
+#define PEF2256_PC5 0x84 /* Port Configuration 5 */
+#define PEF2256_PC5_CRP BIT(0)
+#define PEF2256_GPC1 0x85 /* Global Port Configuration 1 */
+#define PEF2256_GPC1_CSFP_MASK (0x3 << 5)
+#define PEF2256_GPC1_CSFP_SEC_IN_HIGH (0x0 << 5)
+#define PEF2256_GPC1_CSFP_SEC_OUT_HIGH (0x1 << 5)
+#define PEF2256_GPC1_CSFP_FSC_OUT_HIGH (0x2 << 5)
+#define PEF2256_GPC1_CSFP_FSC_OUT_LOW (0x3 << 5)
+#define PEF2256_PC6 0x86 /* Port Configuration 6 */
+#define PEF2256_GCM(_n) (0x92 + (_n) - 1) /* Global Counter Mode n=1..8 */
+#define PEF2256_GCM1 0x92 /* Global Counter Mode 1 */
+#define PEF2256_GCM2 0x93 /* Global Counter Mode 2 */
+#define PEF2256_GCM3 0x94 /* Global Counter Mode 3 */
+#define PEF2256_GCM4 0x95 /* Global Counter Mode 4 */
+#define PEF2256_GCM5 0x96 /* Global Counter Mode 5 */
+#define PEF2256_GCM6 0x97 /* Global Counter Mode 6 */
+#define PEF2256_GCM7 0x98 /* Global Counter Mode 7 */
+#define PEF2256_GCM8 0x99 /* Global Counter Mode 8 */
+
+#define PEF2256_VSTR 0x4A /* Version Status Register */
+#define PEF2256_VSTR_VERSION_12 0x00
+#define PEF2256_VSTR_VERSION_21 0x10
+#define PEF2256_VSTR_VERSION_2x 0x05
+#define PEF2256_FRS0 0x4C /* Framer Receive Status 0 */
+#define PEF2256_FRS0_LOS BIT(7)
+#define PEF2256_FRS0_AIS BIT(6)
+#define PEF2256_ISR(_n) (0x68 + (_n)) /* Interrupt Status Register (n=0..5) */
+#define PEF2256_ISR0 0x68 /* Interrupt Status Register 0 */
+#define PEF2256_ISR1 0x69 /* Interrupt Status Register 1 */
+#define PEF2256_ISR2 0x6A /* Interrupt Status Register 2 */
+#define PEF2256_ISR3 0x6B /* Interrupt Status Register 3 */
+#define PEF2256_ISR4 0x6C /* Interrupt Status Register 4 */
+#define PEF2256_ISR5 0x6D /* Interrupt Status Register 5 */
+#define PEF2256_GIS 0x6E /* Global Interrupt Status */
+#define PEF2256_GIS_ISR(_n) (1 << (_n))
+#define PEF2256_WID 0xEC /* Wafer Identification Register */
+#define PEF2256_12_WID_MASK 0x03
+#define PEF2256_12_WID_VERSION_12 0x03
+#define PEF2256_2X_WID_MASK 0xc0
+#define PEF2256_2X_WID_VERSION_21 0x00
+#define PEF2256_2X_WID_VERSION_22 0x40
+
+/* IMR2/ISR2 Interrupts */
+#define PEF2256_INT2_AIS BIT(3)
+#define PEF2256_INT2_LOS BIT(2)
+
+enum pef2256_version {
+ PEF2256_VERSION_UNKNOWN,
+ PEF2256_VERSION_1_2,
+ PEF2256_VERSION_2_1,
+ PEF2256_VERSION_2_2,
+};
+
+enum pef2256_frame_type {
+ PEF2256_FRAME_E1_DOUBLEFRAME,
+ PEF2256_FRAME_E1_CRC4_MULTIFRAME,
+ PEF2256_FRAME_E1_AUTO_MULTIFRAME,
+ PEF2256_FRAME_T1J1_4FRAME,
+ PEF2256_FRAME_T1J1_12FRAME,
+ PEF2256_FRAME_T1J1_24FRAME,
+ PEF2256_FRAME_T1J1_72FRAME,
+};
+
+struct pef2256_pinreg_desc {
+ int offset;
+ u8 mask;
+};
+
+struct pef2256_function_desc {
+ const char *name;
+ const char * const*groups;
+ unsigned int ngroups;
+ u8 func_val;
+};
+
+struct pef2256 {
+ struct device *dev;
+ void *__iomem regs;
+ enum pef2256_version version;
+ struct clk *mclk;
+ struct clk *sclkr;
+ struct clk *sclkx;
+ struct gpio_desc *reset_gpio;
+ struct {
+ struct pinctrl_desc pctrl_desc;
+ const struct pef2256_function_desc *functions;
+ unsigned int nfunctions;
+ } pinctrl;
+ bool is_e1;
+ unsigned long sysclk_rate;
+ u32 data_rate;
+ bool is_tx_falling_edge;
+ bool is_subordinate;
+ enum pef2256_frame_type frame_type;
+ u8 channel_phase;
+ atomic_t carrier;
+ struct atomic_notifier_head event_notifier_list;
+};
+
+static inline u8 pef2256_read8(struct pef2256 *pef2256, int offset)
+{
+ return ioread8(pef2256->regs + offset);
+}
+
+static inline void pef2256_write8(struct pef2256 *pef2256, int offset, u8 val)
+{
+ iowrite8(val, pef2256->regs + offset);
+}
+
+static inline void pef2256_clrbits8(struct pef2256 *pef2256, int offset, u8 clr)
+{
+ pef2256_write8(pef2256, offset, pef2256_read8(pef2256, offset) & ~clr);
+}
+
+static inline void pef2256_setbits8(struct pef2256 *pef2256, int offset, u8 set)
+{
+ pef2256_write8(pef2256, offset, pef2256_read8(pef2256, offset) | set);
+}
+
+
+static inline void pef2256_clrsetbits8(struct pef2256 *pef2256, int offset, u8 clr, u8 set)
+{
+ u8 v;
+
+ v = pef2256_read8(pef2256, offset);
+ v &= ~clr;
+ v |= set;
+ pef2256_write8(pef2256, offset, v);
+}
+
+static enum pef2256_version pef2256_get_version(struct pef2256 *pef2256)
+{
+ enum pef2256_version version = PEF2256_VERSION_UNKNOWN;
+ const char *version_txt;
+ u8 vstr, wid;
+
+ vstr = pef2256_read8(pef2256, PEF2256_VSTR);
+ wid = pef2256_read8(pef2256, PEF2256_WID);
+
+ switch (vstr) {
+ case PEF2256_VSTR_VERSION_12:
+ if ((wid & PEF2256_12_WID_MASK) == PEF2256_12_WID_VERSION_12) {
+ version_txt = "1.2";
+ version = PEF2256_VERSION_1_2;
+ }
+ break;
+ case PEF2256_VSTR_VERSION_2x:
+ switch (wid & PEF2256_2X_WID_MASK) {
+ case PEF2256_2X_WID_VERSION_21:
+ version_txt = "2.1 (2.x)";
+ version = PEF2256_VERSION_2_1;
+ break;
+ case PEF2256_2X_WID_VERSION_22:
+ version_txt = "2.2 (2.x)";
+ version = PEF2256_VERSION_2_2;
+ break;
+ }
+ break;
+ case PEF2256_VSTR_VERSION_21:
+ version_txt = "2.1";
+ version = PEF2256_VERSION_2_1;
+ break;
+ }
+
+ if (version == PEF2256_VERSION_UNKNOWN)
+ dev_err(pef2256->dev, "Unknown version (0x%02x, 0x%02x)\n", vstr, wid);
+ else
+ dev_info(pef2256->dev, "Version %s detected\n", version_txt);
+
+ return version;
+}
+
+enum pef2256_gcm_config_item {
+ PEF2256_GCM_CONFIG_1544000 = 0,
+ PEF2256_GCM_CONFIG_2048000,
+ PEF2256_GCM_CONFIG_8192000,
+ PEF2256_GCM_CONFIG_10000000,
+ PEF2256_GCM_CONFIG_12352000,
+ PEF2256_GCM_CONFIG_16384000,
+};
+
+struct pef2256_gcm_config {
+ u8 gcm_12[6];
+ u8 gcm_2x[8];
+};
+
+static const struct pef2256_gcm_config pef2256_gcm_configs[] = {
+ [PEF2256_GCM_CONFIG_1544000] = {
+ .gcm_12 = {0xF0, 0x51, 0x00, 0x80, 0x00, 0x15},
+ .gcm_2x = {0x00, 0x15, 0x00, 0x08, 0x00, 0x3F, 0x9C, 0xDF},
+ },
+ [PEF2256_GCM_CONFIG_2048000] = {
+ .gcm_12 = {0x00, 0x58, 0xD2, 0xC2, 0x00, 0x10},
+ .gcm_2x = {0x00, 0x18, 0xFB, 0x0B, 0x00, 0x2F, 0xDB, 0xDF},
+ },
+ [PEF2256_GCM_CONFIG_8192000] = {
+ .gcm_12 = {0x00, 0x58, 0xD2, 0xC2, 0x03, 0x10},
+ .gcm_2x = {0x00, 0x18, 0xFB, 0x0B, 0x00, 0x0B, 0xDB, 0xDF},
+ },
+ [PEF2256_GCM_CONFIG_10000000] = {
+ .gcm_12 = {0x90, 0x51, 0x81, 0x8F, 0x04, 0x10},
+ .gcm_2x = {0x40, 0x1B, 0x3D, 0x0A, 0x00, 0x07, 0xC9, 0xDC},
+ },
+ [PEF2256_GCM_CONFIG_12352000] = {
+ .gcm_12 = {0xF0, 0x51, 0x00, 0x80, 0x07, 0x15},
+ .gcm_2x = {0x00, 0x19, 0x00, 0x08, 0x01, 0x0A, 0x98, 0xDA},
+ },
+ [PEF2256_GCM_CONFIG_16384000] = {
+ .gcm_12 = {0x00, 0x58, 0xD2, 0xC2, 0x07, 0x10},
+ .gcm_2x = {0x00, 0x18, 0xFB, 0x0B, 0x01, 0x0B, 0xDB, 0xDF},
+ },
+};
+
+static int pef2256_setup_gcm(struct pef2256 *pef2256)
+{
+ enum pef2256_gcm_config_item item;
+ unsigned long mclk_rate;
+ const u8 *gcm;
+ int i, count;
+
+ mclk_rate = clk_get_rate(pef2256->mclk);
+ switch (mclk_rate) {
+ case 1544000:
+ item = PEF2256_GCM_CONFIG_1544000;
+ break;
+ case 2048000:
+ item = PEF2256_GCM_CONFIG_2048000;
+ break;
+ case 8192000:
+ item = PEF2256_GCM_CONFIG_8192000;
+ break;
+ case 10000000:
+ item = PEF2256_GCM_CONFIG_10000000;
+ break;
+ case 12352000:
+ item = PEF2256_GCM_CONFIG_12352000;
+ break;
+ case 16384000:
+ item = PEF2256_GCM_CONFIG_16384000;
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported v2.x MCLK rate %lu\n", mclk_rate);
+ return -EINVAL;
+ }
+
+ BUILD_BUG_ON(item >= ARRAY_SIZE(pef2256_gcm_configs));
+
+ if (pef2256->version == PEF2256_VERSION_1_2) {
+ gcm = pef2256_gcm_configs[item].gcm_12;
+ count = ARRAY_SIZE(pef2256_gcm_configs[item].gcm_12);
+ } else {
+ gcm = pef2256_gcm_configs[item].gcm_2x;
+ count = ARRAY_SIZE(pef2256_gcm_configs[item].gcm_2x);
+ }
+
+ for (i = 0; i < count; i++)
+ pef2256_write8(pef2256, PEF2256_GCM(i+1), *(gcm + i));
+
+ return 0;
+}
+
+static int pef2256_setup_e1(struct pef2256 *pef2256)
+{
+ u8 fmr1, fmr2, sic1;
+ int ret;
+
+ /* Basic setup, Master clocking mode (GCM8..1) */
+ ret = pef2256_setup_gcm(pef2256);
+ if (ret)
+ return ret;
+
+ /* RCLK output : DPLL clock, DCO-X enabled, DCO-X internal ref clock */
+ pef2256_write8(pef2256, PEF2256_CMR1, 0x00);
+
+ /*
+ * SCLKR selected, SCLKX selected,
+ * receive synchro pulse sourced by SYPR,
+ * transmit synchro pulse sourced by SYPX
+ */
+ pef2256_write8(pef2256, PEF2256_CMR2, 0x00);
+
+ /* NRZ coding, no alarm simulation */
+ pef2256_write8(pef2256, PEF2256_FMR0, 0x00);
+
+ /*
+ * E1, frame format, 2 Mbit/s system data rate, no AIS
+ * transmission to remote end or system interface, payload loop
+ * off, transmit remote alarm on
+ */
+ fmr1 = 0x00;
+ fmr2 = PEF2256_FMR2_AXRA;
+ switch (pef2256->frame_type) {
+ case PEF2256_FRAME_E1_DOUBLEFRAME:
+ fmr2 |= PEF2256_FMR2_RFS_DOUBLEFRAME;
+ break;
+ case PEF2256_FRAME_E1_CRC4_MULTIFRAME:
+ fmr1 |= PEF2256_FMR1_XFS;
+ fmr2 |= PEF2256_FMR2_RFS_CRC4_MULTIFRAME;
+ break;
+ case PEF2256_FRAME_E1_AUTO_MULTIFRAME:
+ fmr1 |= PEF2256_FMR1_XFS;
+ fmr2 |= PEF2256_FMR2_RFS_AUTO_MULTIFRAME;
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported frame type %d\n", pef2256->frame_type);
+ return -EINVAL;
+ }
+ pef2256_write8(pef2256, PEF2256_FMR1, fmr1);
+ pef2256_write8(pef2256, PEF2256_FMR2, fmr2);
+
+ /* E1 default for the receive slicer threshold */
+ pef2256_write8(pef2256, PEF2256_LIM2, PEF2256_LIM2_SLT_THR50);
+ if (!pef2256->is_subordinate) {
+ /* SEC input, active high */
+ pef2256_write8(pef2256, PEF2256_GPC1, PEF2256_GPC1_CSFP_SEC_IN_HIGH);
+ } else {
+ /* Loop-timed */
+ pef2256_setbits8(pef2256, PEF2256_LIM2, PEF2256_LIM2_ELT);
+ /* FSC output, active high */
+ pef2256_write8(pef2256, PEF2256_GPC1, PEF2256_GPC1_CSFP_FSC_OUT_HIGH);
+ }
+
+ /* internal second timer, power on */
+ pef2256_write8(pef2256, PEF2256_GCR, 0x00);
+
+ /*
+ * slave mode, local loop off, mode short-haul
+ * In v2.x, bit3 is a forced 1 bit in the datasheet -> Need to be set.
+ */
+ if (pef2256->version == PEF2256_VERSION_1_2)
+ pef2256_write8(pef2256, PEF2256_LIM0, 0x00);
+ else
+ pef2256_write8(pef2256, PEF2256_LIM0, PEF2256_2X_LIM0_BIT3);
+
+ /* analog interface selected, remote loop off */
+ pef2256_write8(pef2256, PEF2256_LIM1, 0x00);
+
+ /*
+ * SCLKR, SCLKX, RCLK configured to inputs,
+ * XFMS active low, CLK1 and CLK2 pin configuration
+ */
+ pef2256_write8(pef2256, PEF2256_PC5, 0x00);
+ pef2256_write8(pef2256, PEF2256_PC6, 0x00);
+
+ /*
+ * 2.048 MHz system clocking rate, receive buffer 2 frames, transmit
+ * buffer bypass, data sampled and transmitted on the falling edge of
+ * SCLKR/X, automatic freeze signaling, data is active in the first
+ * channel phase
+ */
+ pef2256_write8(pef2256, PEF2256_SIC1, 0x00);
+ pef2256_write8(pef2256, PEF2256_SIC2, 0x00);
+ pef2256_write8(pef2256, PEF2256_SIC3, 0x00);
+
+ /* channel loop-back and single frame mode are disabled */
+ pef2256_write8(pef2256, PEF2256_LOOP, 0x00);
+
+ /* all bits of the transmitted service word are cleared */
+ pef2256_write8(pef2256, PEF2256_XSW, PEF2256_XSW_XY(0x1F));
+ /* CAS disabled and clear spare bit values */
+ pef2256_write8(pef2256, PEF2256_XSP, 0x00);
+
+ /* no transparent mode active */
+ pef2256_write8(pef2256, PEF2256_TSWM, 0x00);
+
+ /*
+ * the transmit clock offset is cleared
+ * the transmit time slot offset is cleared
+ */
+ pef2256_write8(pef2256, PEF2256_XC0, 0x00);
+
+ /* Keep default value for the transmit offset */
+ pef2256_write8(pef2256, PEF2256_XC1, 0x9C);
+
+ /*
+ * transmit pulse mask, default value from datasheet
+ * transmitter in tristate mode
+ */
+ if (pef2256->version == PEF2256_VERSION_1_2)
+ pef2256_write8(pef2256, PEF2256_XPM0, 0x7B);
+ else
+ pef2256_write8(pef2256, PEF2256_XPM0, 0x9C);
+ pef2256_write8(pef2256, PEF2256_XPM1, 0x03);
+ pef2256_write8(pef2256, PEF2256_XPM2, PEF2256_XPM2_XLT | 0x00);
+
+ /* "master" mode */
+ if (!pef2256->is_subordinate)
+ pef2256_setbits8(pef2256, PEF2256_LIM0, PEF2256_LIM0_MAS);
+
+ /* transmit line in normal operation */
+ pef2256_clrbits8(pef2256, PEF2256_XPM2, PEF2256_XPM2_XLT);
+
+ /* receive input threshold = 0,21V */
+ if (pef2256->version == PEF2256_VERSION_1_2)
+ pef2256_clrsetbits8(pef2256, PEF2256_LIM1, PEF2256_12_LIM1_RIL_MASK,
+ PEF2256_12_LIM1_RIL_210);
+ else
+ pef2256_clrsetbits8(pef2256, PEF2256_LIM1, PEF2256_2X_LIM1_RIL_MASK,
+ PEF2256_2X_LIM1_RIL_210);
+
+ /* transmit line coding = HDB3 */
+ pef2256_clrsetbits8(pef2256, PEF2256_FMR0, PEF2256_FMR0_XC_MASK, PEF2256_FMR0_XC_HDB3);
+
+ /* receive line coding = HDB3 */
+ pef2256_clrsetbits8(pef2256, PEF2256_FMR0, PEF2256_FMR0_RC_MASK, PEF2256_FMR0_RC_HDB3);
+
+ /* detection of LOS alarm = 176 pulses (ie (10 + 1) * 16) */
+ pef2256_write8(pef2256, PEF2256_PCD, 10);
+
+ /* recovery of LOS alarm = 22 pulses (ie 21 + 1) */
+ pef2256_write8(pef2256, PEF2256_PCR, 21);
+
+ /* DCO-X center frequency enabled */
+ pef2256_setbits8(pef2256, PEF2256_CMR2, PEF2256_CMR2_DCOXC);
+
+ if (pef2256->is_subordinate) {
+ /* select RCLK source = 2M, disable switching from RCLK to SYNC */
+ pef2256_clrsetbits8(pef2256, PEF2256_CMR1, PEF2256_CMR1_RS_MASK,
+ PEF2256_CMR1_RS_DCOR_2048);
+ pef2256_setbits8(pef2256, PEF2256_CMR1, PEF2256_CMR1_DCS);
+
+ /* transmit buffer size = 2 frames, transparent mode */
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_XBS_MASK,
+ PEF2256_SIC1_XBS_2FRAMES);
+ pef2256_setbits8(pef2256, PEF2256_XSW, PEF2256_XSW_XTM);
+ }
+
+ if (pef2256->version != PEF2256_VERSION_1_2) {
+ /* during inactive channel phase switch RDO/RSIG into tri-state */
+ pef2256_setbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RTRI);
+ }
+
+ if (pef2256->is_tx_falling_edge) {
+ /* falling edge sync pulse transmit, rising edge sync pulse receive */
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RESX, PEF2256_SIC3_RESR);
+ } else {
+ /* rising edge sync pulse transmit, falling edge sync pulse receive */
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RESR, PEF2256_SIC3_RESX);
+ }
+
+ /* transmit offset counter (XCO10..0) = 4 */
+ pef2256_write8(pef2256, PEF2256_XC0, 0);
+ pef2256_write8(pef2256, PEF2256_XC1, 4);
+ /* receive offset counter (RCO10..0) = 4 */
+ pef2256_write8(pef2256, PEF2256_RC0, 0);
+ pef2256_write8(pef2256, PEF2256_RC1, 4);
+
+ /* system clock rate */
+ switch (pef2256->sysclk_rate) {
+ case 2048000:
+ sic1 = PEF2256_SIC1_SSC_2048;
+ break;
+ case 4096000:
+ sic1 = PEF2256_SIC1_SSC_4096;
+ break;
+ case 8192000:
+ sic1 = PEF2256_SIC1_SSC_8192;
+ break;
+ case 16384000:
+ sic1 = PEF2256_SIC1_SSC_16384;
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported sysclk rate %lu\n", pef2256->sysclk_rate);
+ return -EINVAL;
+ }
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_SSC_MASK, sic1);
+
+ /* data clock rate */
+ switch (pef2256->data_rate) {
+ case 2048000:
+ fmr1 = PEF2256_FMR1_SSD_2048;
+ sic1 = PEF2256_SIC1_SSD_2048;
+ break;
+ case 4096000:
+ fmr1 = PEF2256_FMR1_SSD_4096;
+ sic1 = PEF2256_SIC1_SSD_4096;
+ break;
+ case 8192000:
+ fmr1 = PEF2256_FMR1_SSD_8192;
+ sic1 = PEF2256_SIC1_SSD_8192;
+ break;
+ case 16384000:
+ fmr1 = PEF2256_FMR1_SSD_16384;
+ sic1 = PEF2256_SIC1_SSD_16384;
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported data rate %u\n", pef2256->data_rate);
+ return -EINVAL;
+ }
+ pef2256_clrsetbits8(pef2256, PEF2256_FMR1, PEF2256_FMR1_SSD_MASK, fmr1);
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_SSD_MASK, sic1);
+
+ /* channel phase */
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC2, PEF2256_SIC2_SICS_MASK,
+ PEF2256_SIC2_SICS(pef2256->channel_phase));
+
+ /* error counter latched every 1s */
+ pef2256_setbits8(pef2256, PEF2256_FMR1, PEF2256_FMR1_ECM);
+ /* error counter mode COFA */
+ pef2256_setbits8(pef2256, PEF2256_GCR, PEF2256_GCR_ECMC);
+ /* errors in service words have no influence */
+ pef2256_setbits8(pef2256, PEF2256_RC0, PEF2256_RC0_SWD);
+ /* 4 consecutive incorrect FAS causes loss of sync */
+ pef2256_setbits8(pef2256, PEF2256_RC0, PEF2256_RC0_ASY4);
+ /* Si-Bit, Spare bit For International, FAS word */
+ pef2256_setbits8(pef2256, PEF2256_XSW, PEF2256_XSW_XSIS);
+ pef2256_setbits8(pef2256, PEF2256_XSP, PEF2256_XSP_XSIF);
+
+ /* port RCLK is output */
+ pef2256_setbits8(pef2256, PEF2256_PC5, PEF2256_PC5_CRP);
+ /* status changed interrupt at both up and down */
+ pef2256_setbits8(pef2256, PEF2256_GCR, PEF2256_GCR_SCI);
+
+ /* Clear any ISR2 pending interrupts and unmask needed interrupts */
+ pef2256_read8(pef2256, PEF2256_ISR2);
+ pef2256_clrbits8(pef2256, PEF2256_IMR2, PEF2256_INT2_LOS | PEF2256_INT2_AIS);
+
+ /* reset lines */
+ pef2256_write8(pef2256, PEF2256_CMDR, PEF2256_CMDR_RRES | PEF2256_CMDR_XRES);
+ return 0;
+}
+
+static int pef2256_setup(struct pef2256 *pef2256)
+{
+ if (pef2256->is_e1)
+ return pef2256_setup_e1(pef2256);
+
+ dev_err(pef2256->dev, "Only E1 line is currently supported\n");
+ return -EOPNOTSUPP;
+}
+
+
+
+static void pef2256_isr_default_handler(struct pef2256 *pef2256, u8 nbr, u8 isr)
+{
+ dev_warn(pef2256->dev, "ISR%u: 0x%02x not handled\n", nbr, isr);
+}
+
+static bool pef2256_is_carrier_on(struct pef2256 *pef2256)
+{
+ u8 frs0;
+
+ frs0 = pef2256_read8(pef2256, PEF2256_FRS0);
+ return !(frs0 & (PEF2256_FRS0_LOS | PEF2256_FRS0_AIS));
+}
+
+static void pef2256_isr2_handler(struct pef2256 *pef2256, u8 nbr, u8 isr)
+{
+ bool carrier;
+
+ if (isr & (PEF2256_INT2_LOS | PEF2256_INT2_AIS)) {
+ carrier = pef2256_is_carrier_on(pef2256);
+ if (atomic_xchg(&pef2256->carrier, carrier) != carrier)
+ atomic_notifier_call_chain(&pef2256->event_notifier_list,
+ PEF2256_EVENT_CARRIER, NULL);
+ }
+}
+
+static irqreturn_t pef2256_irq_handler(int irq, void *priv)
+{
+ void (*pef2256_isr_handler[])(struct pef2256 *, u8, u8) = {
+ [0] = pef2256_isr_default_handler,
+ [1] = pef2256_isr_default_handler,
+ [2] = pef2256_isr2_handler,
+ [3] = pef2256_isr_default_handler,
+ [4] = pef2256_isr_default_handler,
+ [5] = pef2256_isr_default_handler
+ };
+ struct pef2256 *pef2256 = (struct pef2256 *)priv;
+ u8 gis;
+ u8 isr;
+ u8 n;
+
+ gis = pef2256_read8(pef2256, PEF2256_GIS);
+
+ for (n = 0; n < ARRAY_SIZE(pef2256_isr_handler) ; n++) {
+ if (gis & PEF2256_GIS_ISR(n)) {
+ isr = pef2256_read8(pef2256, PEF2256_ISR(n));
+ pef2256_isr_handler[n](pef2256, n, isr);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int pef2256_check_rates(struct pef2256 *pef2256, unsigned long sysclk_rate,
+ unsigned long data_rate)
+{
+ unsigned long rate;
+
+ switch (sysclk_rate) {
+ case 2048000:
+ case 4096000:
+ case 8192000:
+ case 16384000:
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported system clock rate %lu\n", sysclk_rate);
+ return -EINVAL;
+ }
+
+ for (rate = data_rate; rate <= data_rate * 4; rate *= 2) {
+ if (rate == sysclk_rate)
+ return 0;
+ }
+ dev_err(pef2256->dev, "Unsupported data rate %lu with system clock rate %lu\n",
+ data_rate, sysclk_rate);
+ return -EINVAL;
+}
+
+static int pef2556_of_parse(struct pef2256 *pef2256, struct device_node *np)
+{
+ const char *str;
+ int ret;
+
+ str = "e1";
+ ret = of_property_read_string(np, "lantiq,line-interface", &str);
+ if (ret && ret != -EINVAL) {
+ dev_err(pef2256->dev, "%pOF: failed to read lantiq,line-interface\n",
+ np);
+ return ret;
+ }
+ if (!strcmp(str, "e1")) {
+ pef2256->is_e1 = true;
+ } else if (!strcmp(str, "t1j1")) {
+ pef2256->is_e1 = false;
+ } else {
+ dev_err(pef2256->dev, "%pOF: Invalid lantiq,line-interface (%s)\n",
+ np, str);
+ return -EINVAL;
+ }
+ dev_dbg(pef2256->dev, "config: %s line\n", pef2256->is_e1 ? "E1" : "T1/J1");
+
+ pef2256->data_rate = 2048000;
+ ret = of_property_read_u32(np, "lantiq,data-rate-bps", &pef2256->data_rate);
+ if (ret && ret != -EINVAL) {
+ dev_err(pef2256->dev, "%pOF: failed to read lantiq,data-rate-bps\n", np);
+ return ret;
+ }
+ dev_dbg(pef2256->dev, "config: data rate %u bps\n", pef2256->data_rate);
+
+ ret = pef2256_check_rates(pef2256, pef2256->sysclk_rate, pef2256->data_rate);
+ if (ret)
+ return ret;
+
+ pef2256->is_tx_falling_edge = of_property_read_bool(np, "lantiq,clock-falling-edge");
+ dev_dbg(pef2256->dev, "config: tx on %s edge\n",
+ pef2256->is_tx_falling_edge ? "falling" : "rising");
+
+ pef2256->is_subordinate = of_property_read_bool(np, "lantiq,subordinate");
+ dev_dbg(pef2256->dev, "config: subordinate %s\n",
+ pef2256->is_subordinate ? "on" : "off");
+
+ str = pef2256->is_e1 ? "doubleframe" : "12frame";
+ ret = of_property_read_string(np, "lantiq,frame-format", &str);
+ if (ret && ret != -EINVAL) {
+ dev_err(pef2256->dev, "%pOF: failed to read lantiq,frame-format\n",
+ np);
+ return ret;
+ }
+ if (pef2256->is_e1) {
+ if (!strcmp(str, "doubleframe")) {
+ pef2256->frame_type = PEF2256_FRAME_E1_DOUBLEFRAME;
+ } else if (!strcmp(str, "crc4-multiframe")) {
+ pef2256->frame_type = PEF2256_FRAME_E1_CRC4_MULTIFRAME;
+ } else if (!strcmp(str, "auto-multiframe")) {
+ pef2256->frame_type = PEF2256_FRAME_E1_AUTO_MULTIFRAME;
+ } else {
+ dev_err(pef2256->dev, "%pOF: Invalid lantiq,frame-format (%s)\n",
+ np, str);
+ return -EINVAL;
+ }
+ } else {
+ if (!strcmp(str, "4frame")) {
+ pef2256->frame_type = PEF2256_FRAME_T1J1_4FRAME;
+ } else if (!strcmp(str, "12frame")) {
+ pef2256->frame_type = PEF2256_FRAME_T1J1_12FRAME;
+ } else if (!strcmp(str, "24frame")) {
+ pef2256->frame_type = PEF2256_FRAME_T1J1_24FRAME;
+ } else if (!strcmp(str, "72frame")) {
+ pef2256->frame_type = PEF2256_FRAME_T1J1_72FRAME;
+ } else {
+ dev_err(pef2256->dev, "%pOF: Invalid lantiq,frame-format (%s)\n",
+ np, str);
+ return -EINVAL;
+ }
+ }
+ dev_dbg(pef2256->dev, "config: frame type %d\n", pef2256->frame_type);
+
+ pef2256->channel_phase = 0;
+ ret = of_property_read_u8(np, "lantiq,channel-phase", &pef2256->channel_phase);
+ if (ret && ret != -EINVAL) {
+ dev_err(pef2256->dev, "%pOF: failed to read lantiq,channel-phase\n",
+ np);
+ return ret;
+ }
+ if (pef2256->channel_phase >= pef2256->sysclk_rate / pef2256->data_rate) {
+ dev_err(pef2256->dev, "%pOF: Invalid lantiq,channel-phase %u\n",
+ np, pef2256->channel_phase);
+ return -EINVAL;
+ }
+ dev_dbg(pef2256->dev, "config: channel phase %u\n", pef2256->channel_phase);
+
+ return 0;
+}
+
+static int pef2256_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ /* We map 1 group <-> 1 pin */
+ return pef2256->pinctrl.pctrl_desc.npins;
+}
+
+static const char *pef2256_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ /* We map 1 group <-> 1 pin */
+ return pef2256->pinctrl.pctrl_desc.pins[selector].name;
+}
+
+static int pef2256_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
+ const unsigned int **pins,
+ unsigned int *num_pins)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ /* We map 1 group <-> 1 pin */
+ *pins = &pef2256->pinctrl.pctrl_desc.pins[selector].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static const struct pinctrl_ops pef2256_pctlops = {
+ .get_groups_count = pef2256_get_groups_count,
+ .get_group_name = pef2256_get_group_name,
+ .get_group_pins = pef2256_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static int pef2256_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ return pef2256->pinctrl.nfunctions;
+}
+
+static const char *pef2256_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ return pef2256->pinctrl.functions[selector].name;
+}
+
+
+static int pef2256_get_function_groups(struct pinctrl_dev *pctldev, unsigned int selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pef2256->pinctrl.functions[selector].groups;
+ *num_groups = pef2256->pinctrl.functions[selector].ngroups;
+ return 0;
+}
+
+static int pef2256_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
+ unsigned int group_selector)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+ const struct pef2256_pinreg_desc *pinreg_desc;
+ u8 func_val;
+
+ dev_dbg(pef2256->dev, "set %s to %s function\n",
+ pef2256->pinctrl.pctrl_desc.pins[group_selector].name,
+ pef2256->pinctrl.functions[func_selector].name);
+
+ /* We map 1 group <-> 1 pin */
+ pinreg_desc = pef2256->pinctrl.pctrl_desc.pins[group_selector].drv_data;
+ func_val = pef2256->pinctrl.functions[func_selector].func_val;
+
+ pef2256_clrsetbits8(pef2256, pinreg_desc->offset, pinreg_desc->mask,
+ func_val & pinreg_desc->mask);
+
+ return 0;
+}
+
+static const struct pinmux_ops pef2256_pmxops = {
+ .get_functions_count = pef2256_get_functions_count,
+ .get_function_name = pef2256_get_function_name,
+ .get_function_groups = pef2256_get_function_groups,
+ .set_mux = pef2256_set_mux,
+};
+
+#define PEF2256_PINCTRL_PIN(_number, _name, _offset, _mask) { \
+ .number = _number, \
+ .name = _name, \
+ .drv_data = &(struct pef2256_pinreg_desc) { \
+ .offset = _offset, \
+ .mask = _mask, \
+ }, \
+}
+
+static const struct pinctrl_pin_desc pef2256_v12_pins[] = {
+ PEF2256_PINCTRL_PIN(0, "RPA", PEF2256_PC1, PEF2256_12_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(1, "RPB", PEF2256_PC2, PEF2256_12_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(2, "RPC", PEF2256_PC3, PEF2256_12_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(3, "RPD", PEF2256_PC4, PEF2256_12_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(4, "XPA", PEF2256_PC1, PEF2256_12_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(5, "XPB", PEF2256_PC2, PEF2256_12_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(6, "XPC", PEF2256_PC3, PEF2256_12_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(7, "XPD", PEF2256_PC4, PEF2256_12_PC_XPC_MASK),
+};
+
+static const struct pinctrl_pin_desc pef2256_v2x_pins[] = {
+ PEF2256_PINCTRL_PIN(0, "RPA", PEF2256_PC1, PEF2256_2X_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(1, "RPB", PEF2256_PC2, PEF2256_2X_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(2, "RPC", PEF2256_PC3, PEF2256_2X_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(3, "RPD", PEF2256_PC4, PEF2256_2X_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(4, "XPA", PEF2256_PC1, PEF2256_2X_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(5, "XPB", PEF2256_PC2, PEF2256_2X_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(6, "XPC", PEF2256_PC3, PEF2256_2X_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(7, "XPD", PEF2256_PC4, PEF2256_2X_PC_XPC_MASK),
+};
+
+static const char *const pef2256_rp_groups[] = { "RPA", "RPB", "RPC", "RPD" };
+static const char *const pef2256_xp_groups[] = { "XPA", "XPB", "XPC", "XPD" };
+static const char *const pef2256_all_groups[] = { "RPA", "RPB", "RPC", "RPD",
+ "XPA", "XPB", "XPC", "XPD" };
+
+#define PEF2256_FUNCTION(_name, _func_val, _groups) { \
+ .name = _name, \
+ .groups = _groups, \
+ .ngroups = ARRAY_SIZE(_groups), \
+ .func_val = _func_val, \
+}
+
+static const struct pef2256_function_desc pef2256_v2x_functions[] = {
+ PEF2256_FUNCTION("SYPR", PEF2256_2X_PC_RPC_SYPR, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFM", PEF2256_2X_PC_RPC_RFM, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFMB", PEF2256_2X_PC_RPC_RFMB, pef2256_rp_groups),
+ PEF2256_FUNCTION("RSIGM", PEF2256_2X_PC_RPC_RSIGM, pef2256_rp_groups),
+ PEF2256_FUNCTION("RSIG", PEF2256_2X_PC_RPC_RSIG, pef2256_rp_groups),
+ PEF2256_FUNCTION("DLR", PEF2256_2X_PC_RPC_DLR, pef2256_rp_groups),
+ PEF2256_FUNCTION("FREEZE", PEF2256_2X_PC_RPC_FREEZE, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFSP", PEF2256_2X_PC_RPC_RFSP, pef2256_rp_groups),
+ PEF2256_FUNCTION("LOS", PEF2256_2X_PC_RPC_LOS, pef2256_rp_groups),
+
+ PEF2256_FUNCTION("SYPX", PEF2256_2X_PC_XPC_SYPX, pef2256_xp_groups),
+ PEF2256_FUNCTION("XFMS", PEF2256_2X_PC_XPC_XFMS, pef2256_xp_groups),
+ PEF2256_FUNCTION("XSIG", PEF2256_2X_PC_XPC_XSIG, pef2256_xp_groups),
+ PEF2256_FUNCTION("TCLK", PEF2256_2X_PC_XPC_TCLK, pef2256_xp_groups),
+ PEF2256_FUNCTION("XMFB", PEF2256_2X_PC_XPC_XMFB, pef2256_xp_groups),
+ PEF2256_FUNCTION("XSIGM", PEF2256_2X_PC_XPC_XSIGM, pef2256_xp_groups),
+ PEF2256_FUNCTION("DLX", PEF2256_2X_PC_XPC_DLX, pef2256_xp_groups),
+ PEF2256_FUNCTION("XCLK", PEF2256_2X_PC_XPC_XCLK, pef2256_xp_groups),
+ PEF2256_FUNCTION("XLT", PEF2256_2X_PC_XPC_XLT, pef2256_xp_groups),
+
+ PEF2256_FUNCTION("GPI", PEF2256_2X_PC_RPC_GPI | PEF2256_2X_PC_XPC_GPI,
+ pef2256_all_groups),
+ PEF2256_FUNCTION("GPOH", PEF2256_2X_PC_RPC_GPOH | PEF2256_2X_PC_XPC_GPOH,
+ pef2256_all_groups),
+ PEF2256_FUNCTION("GPOL", PEF2256_2X_PC_RPC_GPOL | PEF2256_2X_PC_XPC_GPOL,
+ pef2256_all_groups),
+};
+
+static const struct pef2256_function_desc pef2256_v12_functions[] = {
+ PEF2256_FUNCTION("SYPR", PEF2256_12_PC_RPC_SYPR, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFM", PEF2256_12_PC_RPC_RFM, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFMB", PEF2256_12_PC_RPC_RFMB, pef2256_rp_groups),
+ PEF2256_FUNCTION("RSIGM", PEF2256_12_PC_RPC_RSIGM, pef2256_rp_groups),
+ PEF2256_FUNCTION("RSIG", PEF2256_12_PC_RPC_RSIG, pef2256_rp_groups),
+ PEF2256_FUNCTION("DLR", PEF2256_12_PC_RPC_DLR, pef2256_rp_groups),
+ PEF2256_FUNCTION("FREEZE", PEF2256_12_PC_RPC_FREEZE, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFSP", PEF2256_12_PC_RPC_RFSP, pef2256_rp_groups),
+
+ PEF2256_FUNCTION("SYPX", PEF2256_12_PC_XPC_SYPX, pef2256_xp_groups),
+ PEF2256_FUNCTION("XFMS", PEF2256_12_PC_XPC_XFMS, pef2256_xp_groups),
+ PEF2256_FUNCTION("XSIG", PEF2256_12_PC_XPC_XSIG, pef2256_xp_groups),
+ PEF2256_FUNCTION("TCLK", PEF2256_12_PC_XPC_TCLK, pef2256_xp_groups),
+ PEF2256_FUNCTION("XMFB", PEF2256_12_PC_XPC_XMFB, pef2256_xp_groups),
+ PEF2256_FUNCTION("XSIGM", PEF2256_12_PC_XPC_XSIGM, pef2256_xp_groups),
+ PEF2256_FUNCTION("DLX", PEF2256_12_PC_XPC_DLX, pef2256_xp_groups),
+ PEF2256_FUNCTION("XCLK", PEF2256_12_PC_XPC_XCLK, pef2256_xp_groups),
+ PEF2256_FUNCTION("XLT", PEF2256_12_PC_XPC_XLT, pef2256_xp_groups),
+};
+
+
+static int pef2256_register_pinctrl(struct pef2256 *pef2256)
+{
+ struct pinctrl_dev *pctrl;
+
+ pef2256->pinctrl.pctrl_desc.name = dev_name(pef2256->dev);
+ pef2256->pinctrl.pctrl_desc.owner = THIS_MODULE;
+ pef2256->pinctrl.pctrl_desc.pctlops = &pef2256_pctlops;
+ pef2256->pinctrl.pctrl_desc.pmxops = &pef2256_pmxops;
+ if (pef2256->version == PEF2256_VERSION_1_2) {
+ pef2256->pinctrl.pctrl_desc.pins = pef2256_v12_pins;
+ pef2256->pinctrl.pctrl_desc.npins = ARRAY_SIZE(pef2256_v12_pins);
+ pef2256->pinctrl.functions = pef2256_v12_functions;
+ pef2256->pinctrl.nfunctions = ARRAY_SIZE(pef2256_v12_functions);
+ } else {
+ pef2256->pinctrl.pctrl_desc.pins = pef2256_v2x_pins;
+ pef2256->pinctrl.pctrl_desc.npins = ARRAY_SIZE(pef2256_v2x_pins);
+ pef2256->pinctrl.functions = pef2256_v2x_functions;
+ pef2256->pinctrl.nfunctions = ARRAY_SIZE(pef2256_v2x_functions);
+ }
+
+ pctrl = devm_pinctrl_register(pef2256->dev, &pef2256->pinctrl.pctrl_desc, pef2256);
+ if (IS_ERR(pctrl)) {
+ dev_err(pef2256->dev, "pinctrl driver registration failed\n");
+ return PTR_ERR(pctrl);
+ }
+
+ return 0;
+}
+
+static void pef2256_reset_pinmux(struct pef2256 *pef2256)
+{
+ u8 val;
+ /*
+ * Reset values cannot be used.
+ * They define the SYPR/SYPX pin mux for all the RPx and XPx pins and
+ * Only one pin can be muxed to SYPR and one pin can be muxed to SYPX.
+ * Choose here an other reset value.
+ */
+ if (pef2256->version == PEF2256_VERSION_1_2)
+ val = PEF2256_12_PC_XPC_XCLK | PEF2256_12_PC_RPC_RFSP;
+ else
+ val = PEF2256_2X_PC_XPC_GPI | PEF2256_2X_PC_RPC_GPI;
+
+ pef2256_write8(pef2256, PEF2256_PC1, val);
+ pef2256_write8(pef2256, PEF2256_PC2, val);
+ pef2256_write8(pef2256, PEF2256_PC3, val);
+ pef2256_write8(pef2256, PEF2256_PC4, val);
+}
+
+static ssize_t subordinate_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct pef2256 *pef2256 = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", pef2256->is_subordinate);
+}
+
+static ssize_t subordinate_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pef2256 *pef2256 = dev_get_drvdata(dev);
+ int ret;
+
+ if (strtobool(buf, &pef2256->is_subordinate) < 0)
+ return -EINVAL;
+
+ ret = pef2256_setup(pef2256);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(subordinate);
+
+static const struct attribute_group pef2256_attribute_group = {
+ .attrs = (struct attribute *[]) {
+ &dev_attr_subordinate.attr,
+ NULL,
+ },
+};
+
+static int pef2256_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ unsigned long sclkr_rate, sclkx_rate;
+ struct pef2256 *pef2256;
+ int ret;
+ int irq;
+
+ pef2256 = devm_kzalloc(&pdev->dev, sizeof(*pef2256), GFP_KERNEL);
+ if (!pef2256)
+ return -ENOMEM;
+
+ pef2256->dev = &pdev->dev;
+ ATOMIC_INIT_NOTIFIER_HEAD(&pef2256->event_notifier_list);
+
+ pef2256->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pef2256->regs))
+ return PTR_ERR(pef2256->regs);
+
+ pef2256->mclk = devm_clk_get_enabled(&pdev->dev, "mclk");
+ if (IS_ERR(pef2256->mclk))
+ return PTR_ERR(pef2256->mclk);
+ dev_dbg(pef2256->dev, "mclk %lu Hz\n", clk_get_rate(pef2256->mclk));
+
+ pef2256->sclkr = devm_clk_get_enabled(&pdev->dev, "sclkr");
+ if (IS_ERR(pef2256->sclkr))
+ return PTR_ERR(pef2256->sclkr);
+
+ pef2256->sclkx = devm_clk_get_enabled(&pdev->dev, "sclkx");
+ if (IS_ERR(pef2256->sclkx))
+ return PTR_ERR(pef2256->sclkx);
+
+ /*
+ * Both SCLKR (receive) and SCLKX (transmit) must have the same rate,
+ * stored as sysclk_rate.
+ * The exact value will be checked at pef2256_check_rates()
+ */
+ sclkr_rate = clk_get_rate(pef2256->sclkr);
+ sclkx_rate = clk_get_rate(pef2256->sclkx);
+ dev_dbg(pef2256->dev, "sclkr %lu Hz\n", sclkr_rate);
+ dev_dbg(pef2256->dev, "sclkx %lu Hz\n", sclkx_rate);
+ if (sclkr_rate != sclkx_rate) {
+ dev_err(pef2256->dev, "clk rate mismatch. sclkr %lu Hz, sclkx %lu Hz\n",
+ sclkr_rate, sclkx_rate);
+ return -EINVAL;
+ }
+ pef2256->sysclk_rate = sclkr_rate;
+
+ /* Reset the component. The MCLK clock must be active during reset */
+ pef2256->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(pef2256->reset_gpio))
+ return PTR_ERR(pef2256->reset_gpio);
+ if (pef2256->reset_gpio) {
+ gpiod_set_value_cansleep(pef2256->reset_gpio, 1);
+ udelay(10);
+ gpiod_set_value_cansleep(pef2256->reset_gpio, 0);
+ udelay(10);
+ }
+
+ pef2256->version = pef2256_get_version(pef2256);
+ if (pef2256->version == PEF2256_VERSION_UNKNOWN)
+ return -ENODEV;
+
+ ret = pef2556_of_parse(pef2256, np);
+ if (ret)
+ return ret;
+
+ /* Disable interrupts */
+ pef2256_write8(pef2256, PEF2256_IMR0, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR1, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR2, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR3, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR4, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR5, 0xff);
+
+ /* Clear any pending interrupts */
+ pef2256_read8(pef2256, PEF2256_ISR0);
+ pef2256_read8(pef2256, PEF2256_ISR1);
+ pef2256_read8(pef2256, PEF2256_ISR2);
+ pef2256_read8(pef2256, PEF2256_ISR3);
+ pef2256_read8(pef2256, PEF2256_ISR4);
+ pef2256_read8(pef2256, PEF2256_ISR5);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+ ret = devm_request_irq(pef2256->dev, irq, pef2256_irq_handler, 0, "pef2256", pef2256);
+ if (ret < 0)
+ return ret;
+
+ pef2256_reset_pinmux(pef2256);
+ ret = pef2256_register_pinctrl(pef2256);
+ if (ret)
+ return ret;
+
+ /*
+ * We are going to reset the E1 lines during setup() call and the ISR2
+ * interrupt used to detect the carrier state changed is masked.
+ * It is time to initialize our internal carrier state flag.
+ */
+ atomic_set(&pef2256->carrier, 0);
+
+ ret = pef2256_setup(pef2256);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, pef2256);
+
+ ret = sysfs_create_group(&pef2256->dev->kobj, &pef2256_attribute_group);
+ if (ret < 0) {
+ dev_err(pef2256->dev, "sysfs registration failed (%d)\n", ret);
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+ }
+
+ ret = devm_of_platform_populate(pef2256->dev);
+ if (ret < 0) {
+ dev_err(pef2256->dev, "platform populate failed (%d)\n", ret);
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int pef2256_remove(struct platform_device *pdev)
+{
+ struct pef2256 *pef2256 = platform_get_drvdata(pdev);
+
+ /* Disable interrupts */
+ pef2256_write8(pef2256, PEF2256_IMR0, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR1, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR2, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR3, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR4, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR5, 0xff);
+
+ sysfs_remove_group(&pef2256->dev->kobj, &pef2256_attribute_group);
+
+ return 0;
+}
+
+static const struct of_device_id pef2256_id_table[] = {
+ { .compatible = "lantiq,pef2256" },
+ {} /* sentinel */
+};
+MODULE_DEVICE_TABLE(of, pef2256_id_table);
+
+static struct platform_driver pef2256_driver = {
+ .driver = {
+ .name = "lantiq-pef2256",
+ .of_match_table = pef2256_id_table,
+ },
+ .probe = pef2256_probe,
+ .remove = pef2256_remove,
+};
+module_platform_driver(pef2256_driver);
+
+int pef2256_register_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&pef2256->event_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(pef2256_register_event_notifier);
+
+int pef2256_unregister_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb)
+{
+ return atomic_notifier_chain_unregister(&pef2256->event_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(pef2256_unregister_event_notifier);
+
+bool pef2256_get_carrier(struct pef2256 *pef2256)
+{
+ return !!atomic_read(&pef2256->carrier);
+}
+EXPORT_SYMBOL_GPL(pef2256_get_carrier);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("PEF2256 driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/pef2256.h b/include/linux/mfd/pef2256.h
new file mode 100644
index 000000000000..0c0afcefa3ef
--- /dev/null
+++ b/include/linux/mfd/pef2256.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * PEF2256 management
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+#ifndef __PEF2256_H__
+#define __PEF2256_H__
+
+#include <linux/types.h>
+
+struct pef2256;
+struct notifier_block;
+
+enum pef2256_event {
+ PEF2256_EVENT_CARRIER, /* Carrier state changed */
+};
+
+/* The nb.notifier_call function registered must not sleep */
+int pef2256_register_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb);
+int pef2256_unregister_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb);
+
+/* Retrieve carrier state. true: carrier on, false: carrier off */
+bool pef2256_get_carrier(struct pef2256 *pef2256);
+
+#endif /* __PEF2256_H__ */
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 2/5] mfd: Add support for the Lantiq PEF2256 framer
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
` (2 preceding siblings ...)
2023-03-28 7:48 ` [PATCH v4 2/5] mfd: Add support for the Lantiq PEF2256 framer Herve Codina
@ 2023-03-28 7:48 ` Herve Codina via Alsa-devel
2023-03-28 7:48 ` [PATCH v4 3/5] Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry Herve Codina via Alsa-devel
` (5 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Herve Codina via Alsa-devel @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
[-- Attachment #0: Type: message/rfc822, Size: 54459 bytes --]
From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>, Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Christophe Leroy <christophe.leroy@csgroup.eu>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v4 2/5] mfd: Add support for the Lantiq PEF2256 framer
Date: Tue, 28 Mar 2023 09:48:08 +0200
Message-ID: <20230328074811.594361-3-herve.codina@bootlin.com>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
drivers/mfd/Kconfig | 17 +
drivers/mfd/Makefile | 1 +
drivers/mfd/pef2256.c | 1355 +++++++++++++++++++++++++++++++++++
include/linux/mfd/pef2256.h | 28 +
4 files changed, 1401 insertions(+)
create mode 100644 drivers/mfd/pef2256.c
create mode 100644 include/linux/mfd/pef2256.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fcc141e067b9..74c3750d21e4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1063,6 +1063,23 @@ config PCF50633_GPIO
Say yes here if you want to include support GPIO for pins on
the PCF50633 chip.
+config MFD_PEF2256
+ tristate "Lantiq PEF2256 (FALC56) framer"
+ depends on OF
+ select PINCTRL
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ This option enables support for the Lantiq PEF2256 framer, also known
+ as FALC56. This framer and its line interface component is designed
+ to fulfill all required interfacing between analog E1/T1/J1 lines and
+ the digital PCM system highway.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pef2256.
+
config MFD_PM8XXX
tristate "Qualcomm PM8xxx PMIC chips driver"
depends on (ARM || HEXAGON || COMPILE_TEST)
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2f6c89d1e277..b2bb6e6a141c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -195,6 +195,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
+obj-$(CONFIG_MFD_PEF2256) += pef2256.o
obj-$(CONFIG_MFD_PM8XXX) += qcom-pm8xxx.o ssbi.o
obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
diff --git a/drivers/mfd/pef2256.c b/drivers/mfd/pef2256.c
new file mode 100644
index 000000000000..1a3896c2edcf
--- /dev/null
+++ b/drivers/mfd/pef2256.c
@@ -0,0 +1,1355 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PEF2256 also known as FALC56 driver
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#include <linux/mfd/pef2256.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define PEF2256_CMDR 0x02 /* Command Register */
+#define PEF2256_CMDR_RRES BIT(6)
+#define PEF2256_CMDR_XRES BIT(4)
+#define PEF2256_CMDR_SRES BIT(0)
+#define PEF2256_IMR0 0x14 /* Interrupt Mask Register 0 */
+#define PEF2256_IMR1 0x15 /* Interrupt Mask Register 1 */
+#define PEF2256_IMR2 0x16 /* Interrupt Mask Register 2 */
+#define PEF2256_IMR3 0x17 /* Interrupt Mask Register 3 */
+#define PEF2256_IMR4 0x18 /* Interrupt Mask Register 4 */
+#define PEF2256_IMR5 0x19 /* Interrupt Mask Register 5 */
+#define PEF2256_FMR0 0x1C /* Framer Mode Register 0 */
+#define PEF2256_FMR0_XC_MASK (0x3 << 6)
+#define PEF2256_FMR0_XC_NRZ (0x0 << 6)
+#define PEF2256_FMR0_XC_CMI (0x1 << 6)
+#define PEF2256_FMR0_XC_AMI (0x2 << 6)
+#define PEF2256_FMR0_XC_HDB3 (0x3 << 6)
+#define PEF2256_FMR0_RC_MASK (0x3 << 4)
+#define PEF2256_FMR0_RC_NRZ (0x0 << 4)
+#define PEF2256_FMR0_RC_CMI (0x1 << 4)
+#define PEF2256_FMR0_RC_AMI (0x2 << 4)
+#define PEF2256_FMR0_RC_HDB3 (0x3 << 4)
+#define PEF2256_FMR1 0x1D /* Framer Mode Register 1 */
+#define PEF2256_FMR1_XFS BIT(3)
+#define PEF2256_FMR1_ECM BIT(2)
+/* SSD is defined on 2 bits. The other bit is on SIC1 register */
+#define PEF2256_FMR1_SSD_MASK BIT(1)
+#define PEF2256_FMR1_SSD_2048 0
+#define PEF2256_FMR1_SSD_4096 BIT(1)
+#define PEF2256_FMR1_SSD_8192 0
+#define PEF2256_FMR1_SSD_16384 BIT(1)
+#define PEF2256_FMR2 0x1E /* Framer Mode Register 2 */
+#define PEF2256_FMR2_RFS_MASK (0x3 << 6)
+#define PEF2256_FMR2_RFS_DOUBLEFRAME (0x0 << 6)
+#define PEF2256_FMR2_RFS_CRC4_MULTIFRAME (0x2 << 6)
+#define PEF2256_FMR2_RFS_AUTO_MULTIFRAME (0x3 << 6)
+#define PEF2256_FMR2_AXRA BIT(1)
+#define PEF2256_LOOP 0x1F /* Channel Loop-Back */
+#define PEF2256_XSW 0x20 /* Transmit Service Word */
+#define PEF2256_XSW_XSIS BIT(7)
+#define PEF2256_XSW_XTM BIT(6)
+#define PEF2256_XSW_XY_MASK (0x1f << 0)
+#define PEF2256_XSW_XY(_v) ((_v) & 0x1f)
+#define PEF2256_XSP 0x21 /* Transmit Spare Bits */
+#define PEF2256_XSP_XSIF BIT(2)
+#define PEF2256_XC0 0x22 /* Transmit Control 0 */
+#define PEF2256_XC1 0x23 /* Transmit Control 1 */
+#define PEF2256_RC0 0x24 /* Receive Control 0 */
+#define PEF2256_RC0_SWD BIT(7)
+#define PEF2256_RC0_ASY4 BIT(6)
+#define PEF2256_RC1 0x25 /* Receive Control 1 */
+#define PEF2256_XPM0 0x26 /* Transmit Pulse Mask 0 */
+#define PEF2256_XPM1 0x27 /* Transmit Pulse Mask 1 */
+#define PEF2256_XPM2 0x28 /* Transmit Pulse Mask 2 */
+#define PEF2256_XPM2_XLT BIT(6)
+#define PEF2256_TSWM 0x29 /* Transparent Service Word Mask */
+#define PEF2256_LIM0 0x36 /* Line Interface Mode 0 */
+#define PEF2256_2X_LIM0_BIT3 BIT(3) /* v2.x, described as a forced '1' bit */
+#define PEF2256_LIM0_MAS BIT(0)
+#define PEF2256_LIM1 0x37 /* Line Interface Mode 1 */
+#define PEF2256_12_LIM1_RIL_MASK (0x7 << 4)
+#define PEF2256_12_LIM1_RIL_910 (0x0 << 4)
+#define PEF2256_12_LIM1_RIL_740 (0x1 << 4)
+#define PEF2256_12_LIM1_RIL_590 (0x2 << 4)
+#define PEF2256_12_LIM1_RIL_420 (0x3 << 4)
+#define PEF2256_12_LIM1_RIL_320 (0x4 << 4)
+#define PEF2256_12_LIM1_RIL_210 (0x5 << 4)
+#define PEF2256_12_LIM1_RIL_160 (0x6 << 4)
+#define PEF2256_12_LIM1_RIL_100 (0x7 << 4)
+#define PEF2256_2X_LIM1_RIL_MASK (0x7 << 4)
+#define PEF2256_2X_LIM1_RIL_2250 (0x0 << 4)
+#define PEF2256_2X_LIM1_RIL_1100 (0x1 << 4)
+#define PEF2256_2X_LIM1_RIL_600 (0x2 << 4)
+#define PEF2256_2X_LIM1_RIL_350 (0x3 << 4)
+#define PEF2256_2X_LIM1_RIL_210 (0x4 << 4)
+#define PEF2256_2X_LIM1_RIL_140 (0x5 << 4)
+#define PEF2256_2X_LIM1_RIL_100 (0x6 << 4)
+#define PEF2256_2X_LIM1_RIL_50 (0x7 << 4)
+#define PEF2256_PCD 0x38 /* Pulse Count Detection */
+#define PEF2256_PCR 0x39 /* Pulse Count Recovery */
+#define PEF2256_LIM2 0x3A /* Line Interface Mode 2 */
+#define PEF2256_LIM2_SLT_MASK (0x3 << 4)
+#define PEF2256_LIM2_SLT_THR55 (0x0 << 4)
+#define PEF2256_LIM2_SLT_THR67 (0x1 << 4)
+#define PEF2256_LIM2_SLT_THR50 (0x2 << 4)
+#define PEF2256_LIM2_SLT_THR45 (0x3 << 4)
+#define PEF2256_LIM2_ELT BIT(2)
+#define PEF2256_SIC1 0x3E /* System Interface Control 1 */
+#define PEF2256_SIC1_SSC_MASK (BIT(7) | BIT(3))
+#define PEF2256_SIC1_SSC_2048 (0)
+#define PEF2256_SIC1_SSC_4096 BIT(3)
+#define PEF2256_SIC1_SSC_8192 BIT(7)
+#define PEF2256_SIC1_SSC_16384 (BIT(7) | BIT(3))
+/* SSD is defined on 2 bits. The other bit is on FMR1 register */
+#define PEF2256_SIC1_SSD_MASK BIT(6)
+#define PEF2256_SIC1_SSD_2048 0
+#define PEF2256_SIC1_SSD_4096 0
+#define PEF2256_SIC1_SSD_8192 BIT(6)
+#define PEF2256_SIC1_SSD_16384 BIT(6)
+#define PEF2256_SIC1_RBS_MASK (0x3 << 4)
+#define PEF2256_SIC1_RBS_2FRAMES (0x0 << 4)
+#define PEF2256_SIC1_RBS_1FRAME (0x1 << 4)
+#define PEF2256_SIC1_RBS_96BITS (0x2 << 4)
+#define PEF2256_SIC1_RBS_BYPASS (0x3 << 4)
+#define PEF2256_SIC1_XBS_MASK (0x3 << 0)
+#define PEF2256_SIC1_XBS_BYPASS (0x0 << 0)
+#define PEF2256_SIC1_XBS_1FRAME (0x1 << 0)
+#define PEF2256_SIC1_XBS_2FRAMES (0x2 << 0)
+#define PEF2256_SIC1_XBS_96BITS (0x3 << 0)
+#define PEF2256_SIC2 0x3F /* System Interface Control 2 */
+#define PEF2256_SIC2_SICS_MASK (0x7 << 1)
+#define PEF2256_SIC2_SICS(_v) ((_v) << 1)
+#define PEF2256_SIC3 0x40 /* System Interface Control 3 */
+#define PEF2256_SIC3_RTRI BIT(5)
+#define PEF2256_SIC3_RESX BIT(3)
+#define PEF2256_SIC3_RESR BIT(2)
+#define PEF2256_CMR1 0x44 /* Clock Mode Register 1 */
+#define PEF2256_CMR1_RS_MASK (0x3 << 4)
+#define PEF2256_CMR1_RS_DPLL (0x0 << 4)
+#define PEF2256_CMR1_RS_DPLL_LOS_HIGH (0x1 << 4)
+#define PEF2256_CMR1_RS_DCOR_2048 (0x2 << 4)
+#define PEF2256_CMR1_RS_DCOR_8192 (0x3 << 4)
+#define PEF2256_CMR1_DCS BIT(3)
+#define PEF2256_CMR2 0x45 /* Clock Mode Register 2 */
+#define PEF2256_CMR2_DCOXC BIT(5)
+#define PEF2256_GCR 0x46 /* Global Configuration Register */
+#define PEF2256_GCR_SCI BIT(6)
+#define PEF2256_GCR_ECMC BIT(4)
+#define PEF2256_PC1 0x80 /* Port Configuration 1 */
+#define PEF2256_PC2 0x81 /* Port Configuration 2 */
+#define PEF2256_PC3 0x82 /* Port Configuration 3 */
+#define PEF2256_PC4 0x83 /* Port Configuration 4 */
+#define PEF2256_12_PC_RPC_MASK (0x7 << 4)
+#define PEF2256_12_PC_RPC_SYPR (0x0 << 4)
+#define PEF2256_12_PC_RPC_RFM (0x1 << 4)
+#define PEF2256_12_PC_RPC_RFMB (0x2 << 4)
+#define PEF2256_12_PC_RPC_RSIGM (0x3 << 4)
+#define PEF2256_12_PC_RPC_RSIG (0x4 << 4)
+#define PEF2256_12_PC_RPC_DLR (0x5 << 4)
+#define PEF2256_12_PC_RPC_FREEZE (0x6 << 4)
+#define PEF2256_12_PC_RPC_RFSP (0x7 << 4)
+#define PEF2256_12_PC_XPC_MASK (0xf << 0)
+#define PEF2256_12_PC_XPC_SYPX (0x0 << 0)
+#define PEF2256_12_PC_XPC_XFMS (0x1 << 0)
+#define PEF2256_12_PC_XPC_XSIG (0x2 << 0)
+#define PEF2256_12_PC_XPC_TCLK (0x3 << 0)
+#define PEF2256_12_PC_XPC_XMFB (0x4 << 0)
+#define PEF2256_12_PC_XPC_XSIGM (0x5 << 0)
+#define PEF2256_12_PC_XPC_DLX (0x6 << 0)
+#define PEF2256_12_PC_XPC_XCLK (0x7 << 0)
+#define PEF2256_12_PC_XPC_XLT (0x8 << 0)
+#define PEF2256_2X_PC_RPC_MASK (0xf << 4)
+#define PEF2256_2X_PC_RPC_SYPR (0x0 << 4)
+#define PEF2256_2X_PC_RPC_RFM (0x1 << 4)
+#define PEF2256_2X_PC_RPC_RFMB (0x2 << 4)
+#define PEF2256_2X_PC_RPC_RSIGM (0x3 << 4)
+#define PEF2256_2X_PC_RPC_RSIG (0x4 << 4)
+#define PEF2256_2X_PC_RPC_DLR (0x5 << 4)
+#define PEF2256_2X_PC_RPC_FREEZE (0x6 << 4)
+#define PEF2256_2X_PC_RPC_RFSP (0x7 << 4)
+#define PEF2256_2X_PC_RPC_GPI (0x9 << 4)
+#define PEF2256_2X_PC_RPC_GPOH (0xa << 4)
+#define PEF2256_2X_PC_RPC_GPOL (0xb << 4)
+#define PEF2256_2X_PC_RPC_LOS (0xc << 4)
+#define PEF2256_2X_PC_XPC_MASK (0xf << 0)
+#define PEF2256_2X_PC_XPC_SYPX (0x0 << 0)
+#define PEF2256_2X_PC_XPC_XFMS (0x1 << 0)
+#define PEF2256_2X_PC_XPC_XSIG (0x2 << 0)
+#define PEF2256_2X_PC_XPC_TCLK (0x3 << 0)
+#define PEF2256_2X_PC_XPC_XMFB (0x4 << 0)
+#define PEF2256_2X_PC_XPC_XSIGM (0x5 << 0)
+#define PEF2256_2X_PC_XPC_DLX (0x6 << 0)
+#define PEF2256_2X_PC_XPC_XCLK (0x7 << 0)
+#define PEF2256_2X_PC_XPC_XLT (0x8 << 0)
+#define PEF2256_2X_PC_XPC_GPI (0x9 << 0)
+#define PEF2256_2X_PC_XPC_GPOH (0xa << 0)
+#define PEF2256_2X_PC_XPC_GPOL (0xb << 0)
+#define PEF2256_PC5 0x84 /* Port Configuration 5 */
+#define PEF2256_PC5_CRP BIT(0)
+#define PEF2256_GPC1 0x85 /* Global Port Configuration 1 */
+#define PEF2256_GPC1_CSFP_MASK (0x3 << 5)
+#define PEF2256_GPC1_CSFP_SEC_IN_HIGH (0x0 << 5)
+#define PEF2256_GPC1_CSFP_SEC_OUT_HIGH (0x1 << 5)
+#define PEF2256_GPC1_CSFP_FSC_OUT_HIGH (0x2 << 5)
+#define PEF2256_GPC1_CSFP_FSC_OUT_LOW (0x3 << 5)
+#define PEF2256_PC6 0x86 /* Port Configuration 6 */
+#define PEF2256_GCM(_n) (0x92 + (_n) - 1) /* Global Counter Mode n=1..8 */
+#define PEF2256_GCM1 0x92 /* Global Counter Mode 1 */
+#define PEF2256_GCM2 0x93 /* Global Counter Mode 2 */
+#define PEF2256_GCM3 0x94 /* Global Counter Mode 3 */
+#define PEF2256_GCM4 0x95 /* Global Counter Mode 4 */
+#define PEF2256_GCM5 0x96 /* Global Counter Mode 5 */
+#define PEF2256_GCM6 0x97 /* Global Counter Mode 6 */
+#define PEF2256_GCM7 0x98 /* Global Counter Mode 7 */
+#define PEF2256_GCM8 0x99 /* Global Counter Mode 8 */
+
+#define PEF2256_VSTR 0x4A /* Version Status Register */
+#define PEF2256_VSTR_VERSION_12 0x00
+#define PEF2256_VSTR_VERSION_21 0x10
+#define PEF2256_VSTR_VERSION_2x 0x05
+#define PEF2256_FRS0 0x4C /* Framer Receive Status 0 */
+#define PEF2256_FRS0_LOS BIT(7)
+#define PEF2256_FRS0_AIS BIT(6)
+#define PEF2256_ISR(_n) (0x68 + (_n)) /* Interrupt Status Register (n=0..5) */
+#define PEF2256_ISR0 0x68 /* Interrupt Status Register 0 */
+#define PEF2256_ISR1 0x69 /* Interrupt Status Register 1 */
+#define PEF2256_ISR2 0x6A /* Interrupt Status Register 2 */
+#define PEF2256_ISR3 0x6B /* Interrupt Status Register 3 */
+#define PEF2256_ISR4 0x6C /* Interrupt Status Register 4 */
+#define PEF2256_ISR5 0x6D /* Interrupt Status Register 5 */
+#define PEF2256_GIS 0x6E /* Global Interrupt Status */
+#define PEF2256_GIS_ISR(_n) (1 << (_n))
+#define PEF2256_WID 0xEC /* Wafer Identification Register */
+#define PEF2256_12_WID_MASK 0x03
+#define PEF2256_12_WID_VERSION_12 0x03
+#define PEF2256_2X_WID_MASK 0xc0
+#define PEF2256_2X_WID_VERSION_21 0x00
+#define PEF2256_2X_WID_VERSION_22 0x40
+
+/* IMR2/ISR2 Interrupts */
+#define PEF2256_INT2_AIS BIT(3)
+#define PEF2256_INT2_LOS BIT(2)
+
+enum pef2256_version {
+ PEF2256_VERSION_UNKNOWN,
+ PEF2256_VERSION_1_2,
+ PEF2256_VERSION_2_1,
+ PEF2256_VERSION_2_2,
+};
+
+enum pef2256_frame_type {
+ PEF2256_FRAME_E1_DOUBLEFRAME,
+ PEF2256_FRAME_E1_CRC4_MULTIFRAME,
+ PEF2256_FRAME_E1_AUTO_MULTIFRAME,
+ PEF2256_FRAME_T1J1_4FRAME,
+ PEF2256_FRAME_T1J1_12FRAME,
+ PEF2256_FRAME_T1J1_24FRAME,
+ PEF2256_FRAME_T1J1_72FRAME,
+};
+
+struct pef2256_pinreg_desc {
+ int offset;
+ u8 mask;
+};
+
+struct pef2256_function_desc {
+ const char *name;
+ const char * const*groups;
+ unsigned int ngroups;
+ u8 func_val;
+};
+
+struct pef2256 {
+ struct device *dev;
+ void *__iomem regs;
+ enum pef2256_version version;
+ struct clk *mclk;
+ struct clk *sclkr;
+ struct clk *sclkx;
+ struct gpio_desc *reset_gpio;
+ struct {
+ struct pinctrl_desc pctrl_desc;
+ const struct pef2256_function_desc *functions;
+ unsigned int nfunctions;
+ } pinctrl;
+ bool is_e1;
+ unsigned long sysclk_rate;
+ u32 data_rate;
+ bool is_tx_falling_edge;
+ bool is_subordinate;
+ enum pef2256_frame_type frame_type;
+ u8 channel_phase;
+ atomic_t carrier;
+ struct atomic_notifier_head event_notifier_list;
+};
+
+static inline u8 pef2256_read8(struct pef2256 *pef2256, int offset)
+{
+ return ioread8(pef2256->regs + offset);
+}
+
+static inline void pef2256_write8(struct pef2256 *pef2256, int offset, u8 val)
+{
+ iowrite8(val, pef2256->regs + offset);
+}
+
+static inline void pef2256_clrbits8(struct pef2256 *pef2256, int offset, u8 clr)
+{
+ pef2256_write8(pef2256, offset, pef2256_read8(pef2256, offset) & ~clr);
+}
+
+static inline void pef2256_setbits8(struct pef2256 *pef2256, int offset, u8 set)
+{
+ pef2256_write8(pef2256, offset, pef2256_read8(pef2256, offset) | set);
+}
+
+
+static inline void pef2256_clrsetbits8(struct pef2256 *pef2256, int offset, u8 clr, u8 set)
+{
+ u8 v;
+
+ v = pef2256_read8(pef2256, offset);
+ v &= ~clr;
+ v |= set;
+ pef2256_write8(pef2256, offset, v);
+}
+
+static enum pef2256_version pef2256_get_version(struct pef2256 *pef2256)
+{
+ enum pef2256_version version = PEF2256_VERSION_UNKNOWN;
+ const char *version_txt;
+ u8 vstr, wid;
+
+ vstr = pef2256_read8(pef2256, PEF2256_VSTR);
+ wid = pef2256_read8(pef2256, PEF2256_WID);
+
+ switch (vstr) {
+ case PEF2256_VSTR_VERSION_12:
+ if ((wid & PEF2256_12_WID_MASK) == PEF2256_12_WID_VERSION_12) {
+ version_txt = "1.2";
+ version = PEF2256_VERSION_1_2;
+ }
+ break;
+ case PEF2256_VSTR_VERSION_2x:
+ switch (wid & PEF2256_2X_WID_MASK) {
+ case PEF2256_2X_WID_VERSION_21:
+ version_txt = "2.1 (2.x)";
+ version = PEF2256_VERSION_2_1;
+ break;
+ case PEF2256_2X_WID_VERSION_22:
+ version_txt = "2.2 (2.x)";
+ version = PEF2256_VERSION_2_2;
+ break;
+ }
+ break;
+ case PEF2256_VSTR_VERSION_21:
+ version_txt = "2.1";
+ version = PEF2256_VERSION_2_1;
+ break;
+ }
+
+ if (version == PEF2256_VERSION_UNKNOWN)
+ dev_err(pef2256->dev, "Unknown version (0x%02x, 0x%02x)\n", vstr, wid);
+ else
+ dev_info(pef2256->dev, "Version %s detected\n", version_txt);
+
+ return version;
+}
+
+enum pef2256_gcm_config_item {
+ PEF2256_GCM_CONFIG_1544000 = 0,
+ PEF2256_GCM_CONFIG_2048000,
+ PEF2256_GCM_CONFIG_8192000,
+ PEF2256_GCM_CONFIG_10000000,
+ PEF2256_GCM_CONFIG_12352000,
+ PEF2256_GCM_CONFIG_16384000,
+};
+
+struct pef2256_gcm_config {
+ u8 gcm_12[6];
+ u8 gcm_2x[8];
+};
+
+static const struct pef2256_gcm_config pef2256_gcm_configs[] = {
+ [PEF2256_GCM_CONFIG_1544000] = {
+ .gcm_12 = {0xF0, 0x51, 0x00, 0x80, 0x00, 0x15},
+ .gcm_2x = {0x00, 0x15, 0x00, 0x08, 0x00, 0x3F, 0x9C, 0xDF},
+ },
+ [PEF2256_GCM_CONFIG_2048000] = {
+ .gcm_12 = {0x00, 0x58, 0xD2, 0xC2, 0x00, 0x10},
+ .gcm_2x = {0x00, 0x18, 0xFB, 0x0B, 0x00, 0x2F, 0xDB, 0xDF},
+ },
+ [PEF2256_GCM_CONFIG_8192000] = {
+ .gcm_12 = {0x00, 0x58, 0xD2, 0xC2, 0x03, 0x10},
+ .gcm_2x = {0x00, 0x18, 0xFB, 0x0B, 0x00, 0x0B, 0xDB, 0xDF},
+ },
+ [PEF2256_GCM_CONFIG_10000000] = {
+ .gcm_12 = {0x90, 0x51, 0x81, 0x8F, 0x04, 0x10},
+ .gcm_2x = {0x40, 0x1B, 0x3D, 0x0A, 0x00, 0x07, 0xC9, 0xDC},
+ },
+ [PEF2256_GCM_CONFIG_12352000] = {
+ .gcm_12 = {0xF0, 0x51, 0x00, 0x80, 0x07, 0x15},
+ .gcm_2x = {0x00, 0x19, 0x00, 0x08, 0x01, 0x0A, 0x98, 0xDA},
+ },
+ [PEF2256_GCM_CONFIG_16384000] = {
+ .gcm_12 = {0x00, 0x58, 0xD2, 0xC2, 0x07, 0x10},
+ .gcm_2x = {0x00, 0x18, 0xFB, 0x0B, 0x01, 0x0B, 0xDB, 0xDF},
+ },
+};
+
+static int pef2256_setup_gcm(struct pef2256 *pef2256)
+{
+ enum pef2256_gcm_config_item item;
+ unsigned long mclk_rate;
+ const u8 *gcm;
+ int i, count;
+
+ mclk_rate = clk_get_rate(pef2256->mclk);
+ switch (mclk_rate) {
+ case 1544000:
+ item = PEF2256_GCM_CONFIG_1544000;
+ break;
+ case 2048000:
+ item = PEF2256_GCM_CONFIG_2048000;
+ break;
+ case 8192000:
+ item = PEF2256_GCM_CONFIG_8192000;
+ break;
+ case 10000000:
+ item = PEF2256_GCM_CONFIG_10000000;
+ break;
+ case 12352000:
+ item = PEF2256_GCM_CONFIG_12352000;
+ break;
+ case 16384000:
+ item = PEF2256_GCM_CONFIG_16384000;
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported v2.x MCLK rate %lu\n", mclk_rate);
+ return -EINVAL;
+ }
+
+ BUILD_BUG_ON(item >= ARRAY_SIZE(pef2256_gcm_configs));
+
+ if (pef2256->version == PEF2256_VERSION_1_2) {
+ gcm = pef2256_gcm_configs[item].gcm_12;
+ count = ARRAY_SIZE(pef2256_gcm_configs[item].gcm_12);
+ } else {
+ gcm = pef2256_gcm_configs[item].gcm_2x;
+ count = ARRAY_SIZE(pef2256_gcm_configs[item].gcm_2x);
+ }
+
+ for (i = 0; i < count; i++)
+ pef2256_write8(pef2256, PEF2256_GCM(i+1), *(gcm + i));
+
+ return 0;
+}
+
+static int pef2256_setup_e1(struct pef2256 *pef2256)
+{
+ u8 fmr1, fmr2, sic1;
+ int ret;
+
+ /* Basic setup, Master clocking mode (GCM8..1) */
+ ret = pef2256_setup_gcm(pef2256);
+ if (ret)
+ return ret;
+
+ /* RCLK output : DPLL clock, DCO-X enabled, DCO-X internal ref clock */
+ pef2256_write8(pef2256, PEF2256_CMR1, 0x00);
+
+ /*
+ * SCLKR selected, SCLKX selected,
+ * receive synchro pulse sourced by SYPR,
+ * transmit synchro pulse sourced by SYPX
+ */
+ pef2256_write8(pef2256, PEF2256_CMR2, 0x00);
+
+ /* NRZ coding, no alarm simulation */
+ pef2256_write8(pef2256, PEF2256_FMR0, 0x00);
+
+ /*
+ * E1, frame format, 2 Mbit/s system data rate, no AIS
+ * transmission to remote end or system interface, payload loop
+ * off, transmit remote alarm on
+ */
+ fmr1 = 0x00;
+ fmr2 = PEF2256_FMR2_AXRA;
+ switch (pef2256->frame_type) {
+ case PEF2256_FRAME_E1_DOUBLEFRAME:
+ fmr2 |= PEF2256_FMR2_RFS_DOUBLEFRAME;
+ break;
+ case PEF2256_FRAME_E1_CRC4_MULTIFRAME:
+ fmr1 |= PEF2256_FMR1_XFS;
+ fmr2 |= PEF2256_FMR2_RFS_CRC4_MULTIFRAME;
+ break;
+ case PEF2256_FRAME_E1_AUTO_MULTIFRAME:
+ fmr1 |= PEF2256_FMR1_XFS;
+ fmr2 |= PEF2256_FMR2_RFS_AUTO_MULTIFRAME;
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported frame type %d\n", pef2256->frame_type);
+ return -EINVAL;
+ }
+ pef2256_write8(pef2256, PEF2256_FMR1, fmr1);
+ pef2256_write8(pef2256, PEF2256_FMR2, fmr2);
+
+ /* E1 default for the receive slicer threshold */
+ pef2256_write8(pef2256, PEF2256_LIM2, PEF2256_LIM2_SLT_THR50);
+ if (!pef2256->is_subordinate) {
+ /* SEC input, active high */
+ pef2256_write8(pef2256, PEF2256_GPC1, PEF2256_GPC1_CSFP_SEC_IN_HIGH);
+ } else {
+ /* Loop-timed */
+ pef2256_setbits8(pef2256, PEF2256_LIM2, PEF2256_LIM2_ELT);
+ /* FSC output, active high */
+ pef2256_write8(pef2256, PEF2256_GPC1, PEF2256_GPC1_CSFP_FSC_OUT_HIGH);
+ }
+
+ /* internal second timer, power on */
+ pef2256_write8(pef2256, PEF2256_GCR, 0x00);
+
+ /*
+ * slave mode, local loop off, mode short-haul
+ * In v2.x, bit3 is a forced 1 bit in the datasheet -> Need to be set.
+ */
+ if (pef2256->version == PEF2256_VERSION_1_2)
+ pef2256_write8(pef2256, PEF2256_LIM0, 0x00);
+ else
+ pef2256_write8(pef2256, PEF2256_LIM0, PEF2256_2X_LIM0_BIT3);
+
+ /* analog interface selected, remote loop off */
+ pef2256_write8(pef2256, PEF2256_LIM1, 0x00);
+
+ /*
+ * SCLKR, SCLKX, RCLK configured to inputs,
+ * XFMS active low, CLK1 and CLK2 pin configuration
+ */
+ pef2256_write8(pef2256, PEF2256_PC5, 0x00);
+ pef2256_write8(pef2256, PEF2256_PC6, 0x00);
+
+ /*
+ * 2.048 MHz system clocking rate, receive buffer 2 frames, transmit
+ * buffer bypass, data sampled and transmitted on the falling edge of
+ * SCLKR/X, automatic freeze signaling, data is active in the first
+ * channel phase
+ */
+ pef2256_write8(pef2256, PEF2256_SIC1, 0x00);
+ pef2256_write8(pef2256, PEF2256_SIC2, 0x00);
+ pef2256_write8(pef2256, PEF2256_SIC3, 0x00);
+
+ /* channel loop-back and single frame mode are disabled */
+ pef2256_write8(pef2256, PEF2256_LOOP, 0x00);
+
+ /* all bits of the transmitted service word are cleared */
+ pef2256_write8(pef2256, PEF2256_XSW, PEF2256_XSW_XY(0x1F));
+ /* CAS disabled and clear spare bit values */
+ pef2256_write8(pef2256, PEF2256_XSP, 0x00);
+
+ /* no transparent mode active */
+ pef2256_write8(pef2256, PEF2256_TSWM, 0x00);
+
+ /*
+ * the transmit clock offset is cleared
+ * the transmit time slot offset is cleared
+ */
+ pef2256_write8(pef2256, PEF2256_XC0, 0x00);
+
+ /* Keep default value for the transmit offset */
+ pef2256_write8(pef2256, PEF2256_XC1, 0x9C);
+
+ /*
+ * transmit pulse mask, default value from datasheet
+ * transmitter in tristate mode
+ */
+ if (pef2256->version == PEF2256_VERSION_1_2)
+ pef2256_write8(pef2256, PEF2256_XPM0, 0x7B);
+ else
+ pef2256_write8(pef2256, PEF2256_XPM0, 0x9C);
+ pef2256_write8(pef2256, PEF2256_XPM1, 0x03);
+ pef2256_write8(pef2256, PEF2256_XPM2, PEF2256_XPM2_XLT | 0x00);
+
+ /* "master" mode */
+ if (!pef2256->is_subordinate)
+ pef2256_setbits8(pef2256, PEF2256_LIM0, PEF2256_LIM0_MAS);
+
+ /* transmit line in normal operation */
+ pef2256_clrbits8(pef2256, PEF2256_XPM2, PEF2256_XPM2_XLT);
+
+ /* receive input threshold = 0,21V */
+ if (pef2256->version == PEF2256_VERSION_1_2)
+ pef2256_clrsetbits8(pef2256, PEF2256_LIM1, PEF2256_12_LIM1_RIL_MASK,
+ PEF2256_12_LIM1_RIL_210);
+ else
+ pef2256_clrsetbits8(pef2256, PEF2256_LIM1, PEF2256_2X_LIM1_RIL_MASK,
+ PEF2256_2X_LIM1_RIL_210);
+
+ /* transmit line coding = HDB3 */
+ pef2256_clrsetbits8(pef2256, PEF2256_FMR0, PEF2256_FMR0_XC_MASK, PEF2256_FMR0_XC_HDB3);
+
+ /* receive line coding = HDB3 */
+ pef2256_clrsetbits8(pef2256, PEF2256_FMR0, PEF2256_FMR0_RC_MASK, PEF2256_FMR0_RC_HDB3);
+
+ /* detection of LOS alarm = 176 pulses (ie (10 + 1) * 16) */
+ pef2256_write8(pef2256, PEF2256_PCD, 10);
+
+ /* recovery of LOS alarm = 22 pulses (ie 21 + 1) */
+ pef2256_write8(pef2256, PEF2256_PCR, 21);
+
+ /* DCO-X center frequency enabled */
+ pef2256_setbits8(pef2256, PEF2256_CMR2, PEF2256_CMR2_DCOXC);
+
+ if (pef2256->is_subordinate) {
+ /* select RCLK source = 2M, disable switching from RCLK to SYNC */
+ pef2256_clrsetbits8(pef2256, PEF2256_CMR1, PEF2256_CMR1_RS_MASK,
+ PEF2256_CMR1_RS_DCOR_2048);
+ pef2256_setbits8(pef2256, PEF2256_CMR1, PEF2256_CMR1_DCS);
+
+ /* transmit buffer size = 2 frames, transparent mode */
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_XBS_MASK,
+ PEF2256_SIC1_XBS_2FRAMES);
+ pef2256_setbits8(pef2256, PEF2256_XSW, PEF2256_XSW_XTM);
+ }
+
+ if (pef2256->version != PEF2256_VERSION_1_2) {
+ /* during inactive channel phase switch RDO/RSIG into tri-state */
+ pef2256_setbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RTRI);
+ }
+
+ if (pef2256->is_tx_falling_edge) {
+ /* falling edge sync pulse transmit, rising edge sync pulse receive */
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RESX, PEF2256_SIC3_RESR);
+ } else {
+ /* rising edge sync pulse transmit, falling edge sync pulse receive */
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RESR, PEF2256_SIC3_RESX);
+ }
+
+ /* transmit offset counter (XCO10..0) = 4 */
+ pef2256_write8(pef2256, PEF2256_XC0, 0);
+ pef2256_write8(pef2256, PEF2256_XC1, 4);
+ /* receive offset counter (RCO10..0) = 4 */
+ pef2256_write8(pef2256, PEF2256_RC0, 0);
+ pef2256_write8(pef2256, PEF2256_RC1, 4);
+
+ /* system clock rate */
+ switch (pef2256->sysclk_rate) {
+ case 2048000:
+ sic1 = PEF2256_SIC1_SSC_2048;
+ break;
+ case 4096000:
+ sic1 = PEF2256_SIC1_SSC_4096;
+ break;
+ case 8192000:
+ sic1 = PEF2256_SIC1_SSC_8192;
+ break;
+ case 16384000:
+ sic1 = PEF2256_SIC1_SSC_16384;
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported sysclk rate %lu\n", pef2256->sysclk_rate);
+ return -EINVAL;
+ }
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_SSC_MASK, sic1);
+
+ /* data clock rate */
+ switch (pef2256->data_rate) {
+ case 2048000:
+ fmr1 = PEF2256_FMR1_SSD_2048;
+ sic1 = PEF2256_SIC1_SSD_2048;
+ break;
+ case 4096000:
+ fmr1 = PEF2256_FMR1_SSD_4096;
+ sic1 = PEF2256_SIC1_SSD_4096;
+ break;
+ case 8192000:
+ fmr1 = PEF2256_FMR1_SSD_8192;
+ sic1 = PEF2256_SIC1_SSD_8192;
+ break;
+ case 16384000:
+ fmr1 = PEF2256_FMR1_SSD_16384;
+ sic1 = PEF2256_SIC1_SSD_16384;
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported data rate %u\n", pef2256->data_rate);
+ return -EINVAL;
+ }
+ pef2256_clrsetbits8(pef2256, PEF2256_FMR1, PEF2256_FMR1_SSD_MASK, fmr1);
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_SSD_MASK, sic1);
+
+ /* channel phase */
+ pef2256_clrsetbits8(pef2256, PEF2256_SIC2, PEF2256_SIC2_SICS_MASK,
+ PEF2256_SIC2_SICS(pef2256->channel_phase));
+
+ /* error counter latched every 1s */
+ pef2256_setbits8(pef2256, PEF2256_FMR1, PEF2256_FMR1_ECM);
+ /* error counter mode COFA */
+ pef2256_setbits8(pef2256, PEF2256_GCR, PEF2256_GCR_ECMC);
+ /* errors in service words have no influence */
+ pef2256_setbits8(pef2256, PEF2256_RC0, PEF2256_RC0_SWD);
+ /* 4 consecutive incorrect FAS causes loss of sync */
+ pef2256_setbits8(pef2256, PEF2256_RC0, PEF2256_RC0_ASY4);
+ /* Si-Bit, Spare bit For International, FAS word */
+ pef2256_setbits8(pef2256, PEF2256_XSW, PEF2256_XSW_XSIS);
+ pef2256_setbits8(pef2256, PEF2256_XSP, PEF2256_XSP_XSIF);
+
+ /* port RCLK is output */
+ pef2256_setbits8(pef2256, PEF2256_PC5, PEF2256_PC5_CRP);
+ /* status changed interrupt at both up and down */
+ pef2256_setbits8(pef2256, PEF2256_GCR, PEF2256_GCR_SCI);
+
+ /* Clear any ISR2 pending interrupts and unmask needed interrupts */
+ pef2256_read8(pef2256, PEF2256_ISR2);
+ pef2256_clrbits8(pef2256, PEF2256_IMR2, PEF2256_INT2_LOS | PEF2256_INT2_AIS);
+
+ /* reset lines */
+ pef2256_write8(pef2256, PEF2256_CMDR, PEF2256_CMDR_RRES | PEF2256_CMDR_XRES);
+ return 0;
+}
+
+static int pef2256_setup(struct pef2256 *pef2256)
+{
+ if (pef2256->is_e1)
+ return pef2256_setup_e1(pef2256);
+
+ dev_err(pef2256->dev, "Only E1 line is currently supported\n");
+ return -EOPNOTSUPP;
+}
+
+
+
+static void pef2256_isr_default_handler(struct pef2256 *pef2256, u8 nbr, u8 isr)
+{
+ dev_warn(pef2256->dev, "ISR%u: 0x%02x not handled\n", nbr, isr);
+}
+
+static bool pef2256_is_carrier_on(struct pef2256 *pef2256)
+{
+ u8 frs0;
+
+ frs0 = pef2256_read8(pef2256, PEF2256_FRS0);
+ return !(frs0 & (PEF2256_FRS0_LOS | PEF2256_FRS0_AIS));
+}
+
+static void pef2256_isr2_handler(struct pef2256 *pef2256, u8 nbr, u8 isr)
+{
+ bool carrier;
+
+ if (isr & (PEF2256_INT2_LOS | PEF2256_INT2_AIS)) {
+ carrier = pef2256_is_carrier_on(pef2256);
+ if (atomic_xchg(&pef2256->carrier, carrier) != carrier)
+ atomic_notifier_call_chain(&pef2256->event_notifier_list,
+ PEF2256_EVENT_CARRIER, NULL);
+ }
+}
+
+static irqreturn_t pef2256_irq_handler(int irq, void *priv)
+{
+ void (*pef2256_isr_handler[])(struct pef2256 *, u8, u8) = {
+ [0] = pef2256_isr_default_handler,
+ [1] = pef2256_isr_default_handler,
+ [2] = pef2256_isr2_handler,
+ [3] = pef2256_isr_default_handler,
+ [4] = pef2256_isr_default_handler,
+ [5] = pef2256_isr_default_handler
+ };
+ struct pef2256 *pef2256 = (struct pef2256 *)priv;
+ u8 gis;
+ u8 isr;
+ u8 n;
+
+ gis = pef2256_read8(pef2256, PEF2256_GIS);
+
+ for (n = 0; n < ARRAY_SIZE(pef2256_isr_handler) ; n++) {
+ if (gis & PEF2256_GIS_ISR(n)) {
+ isr = pef2256_read8(pef2256, PEF2256_ISR(n));
+ pef2256_isr_handler[n](pef2256, n, isr);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int pef2256_check_rates(struct pef2256 *pef2256, unsigned long sysclk_rate,
+ unsigned long data_rate)
+{
+ unsigned long rate;
+
+ switch (sysclk_rate) {
+ case 2048000:
+ case 4096000:
+ case 8192000:
+ case 16384000:
+ break;
+ default:
+ dev_err(pef2256->dev, "Unsupported system clock rate %lu\n", sysclk_rate);
+ return -EINVAL;
+ }
+
+ for (rate = data_rate; rate <= data_rate * 4; rate *= 2) {
+ if (rate == sysclk_rate)
+ return 0;
+ }
+ dev_err(pef2256->dev, "Unsupported data rate %lu with system clock rate %lu\n",
+ data_rate, sysclk_rate);
+ return -EINVAL;
+}
+
+static int pef2556_of_parse(struct pef2256 *pef2256, struct device_node *np)
+{
+ const char *str;
+ int ret;
+
+ str = "e1";
+ ret = of_property_read_string(np, "lantiq,line-interface", &str);
+ if (ret && ret != -EINVAL) {
+ dev_err(pef2256->dev, "%pOF: failed to read lantiq,line-interface\n",
+ np);
+ return ret;
+ }
+ if (!strcmp(str, "e1")) {
+ pef2256->is_e1 = true;
+ } else if (!strcmp(str, "t1j1")) {
+ pef2256->is_e1 = false;
+ } else {
+ dev_err(pef2256->dev, "%pOF: Invalid lantiq,line-interface (%s)\n",
+ np, str);
+ return -EINVAL;
+ }
+ dev_dbg(pef2256->dev, "config: %s line\n", pef2256->is_e1 ? "E1" : "T1/J1");
+
+ pef2256->data_rate = 2048000;
+ ret = of_property_read_u32(np, "lantiq,data-rate-bps", &pef2256->data_rate);
+ if (ret && ret != -EINVAL) {
+ dev_err(pef2256->dev, "%pOF: failed to read lantiq,data-rate-bps\n", np);
+ return ret;
+ }
+ dev_dbg(pef2256->dev, "config: data rate %u bps\n", pef2256->data_rate);
+
+ ret = pef2256_check_rates(pef2256, pef2256->sysclk_rate, pef2256->data_rate);
+ if (ret)
+ return ret;
+
+ pef2256->is_tx_falling_edge = of_property_read_bool(np, "lantiq,clock-falling-edge");
+ dev_dbg(pef2256->dev, "config: tx on %s edge\n",
+ pef2256->is_tx_falling_edge ? "falling" : "rising");
+
+ pef2256->is_subordinate = of_property_read_bool(np, "lantiq,subordinate");
+ dev_dbg(pef2256->dev, "config: subordinate %s\n",
+ pef2256->is_subordinate ? "on" : "off");
+
+ str = pef2256->is_e1 ? "doubleframe" : "12frame";
+ ret = of_property_read_string(np, "lantiq,frame-format", &str);
+ if (ret && ret != -EINVAL) {
+ dev_err(pef2256->dev, "%pOF: failed to read lantiq,frame-format\n",
+ np);
+ return ret;
+ }
+ if (pef2256->is_e1) {
+ if (!strcmp(str, "doubleframe")) {
+ pef2256->frame_type = PEF2256_FRAME_E1_DOUBLEFRAME;
+ } else if (!strcmp(str, "crc4-multiframe")) {
+ pef2256->frame_type = PEF2256_FRAME_E1_CRC4_MULTIFRAME;
+ } else if (!strcmp(str, "auto-multiframe")) {
+ pef2256->frame_type = PEF2256_FRAME_E1_AUTO_MULTIFRAME;
+ } else {
+ dev_err(pef2256->dev, "%pOF: Invalid lantiq,frame-format (%s)\n",
+ np, str);
+ return -EINVAL;
+ }
+ } else {
+ if (!strcmp(str, "4frame")) {
+ pef2256->frame_type = PEF2256_FRAME_T1J1_4FRAME;
+ } else if (!strcmp(str, "12frame")) {
+ pef2256->frame_type = PEF2256_FRAME_T1J1_12FRAME;
+ } else if (!strcmp(str, "24frame")) {
+ pef2256->frame_type = PEF2256_FRAME_T1J1_24FRAME;
+ } else if (!strcmp(str, "72frame")) {
+ pef2256->frame_type = PEF2256_FRAME_T1J1_72FRAME;
+ } else {
+ dev_err(pef2256->dev, "%pOF: Invalid lantiq,frame-format (%s)\n",
+ np, str);
+ return -EINVAL;
+ }
+ }
+ dev_dbg(pef2256->dev, "config: frame type %d\n", pef2256->frame_type);
+
+ pef2256->channel_phase = 0;
+ ret = of_property_read_u8(np, "lantiq,channel-phase", &pef2256->channel_phase);
+ if (ret && ret != -EINVAL) {
+ dev_err(pef2256->dev, "%pOF: failed to read lantiq,channel-phase\n",
+ np);
+ return ret;
+ }
+ if (pef2256->channel_phase >= pef2256->sysclk_rate / pef2256->data_rate) {
+ dev_err(pef2256->dev, "%pOF: Invalid lantiq,channel-phase %u\n",
+ np, pef2256->channel_phase);
+ return -EINVAL;
+ }
+ dev_dbg(pef2256->dev, "config: channel phase %u\n", pef2256->channel_phase);
+
+ return 0;
+}
+
+static int pef2256_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ /* We map 1 group <-> 1 pin */
+ return pef2256->pinctrl.pctrl_desc.npins;
+}
+
+static const char *pef2256_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ /* We map 1 group <-> 1 pin */
+ return pef2256->pinctrl.pctrl_desc.pins[selector].name;
+}
+
+static int pef2256_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
+ const unsigned int **pins,
+ unsigned int *num_pins)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ /* We map 1 group <-> 1 pin */
+ *pins = &pef2256->pinctrl.pctrl_desc.pins[selector].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static const struct pinctrl_ops pef2256_pctlops = {
+ .get_groups_count = pef2256_get_groups_count,
+ .get_group_name = pef2256_get_group_name,
+ .get_group_pins = pef2256_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static int pef2256_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ return pef2256->pinctrl.nfunctions;
+}
+
+static const char *pef2256_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ return pef2256->pinctrl.functions[selector].name;
+}
+
+
+static int pef2256_get_function_groups(struct pinctrl_dev *pctldev, unsigned int selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pef2256->pinctrl.functions[selector].groups;
+ *num_groups = pef2256->pinctrl.functions[selector].ngroups;
+ return 0;
+}
+
+static int pef2256_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
+ unsigned int group_selector)
+{
+ struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
+ const struct pef2256_pinreg_desc *pinreg_desc;
+ u8 func_val;
+
+ dev_dbg(pef2256->dev, "set %s to %s function\n",
+ pef2256->pinctrl.pctrl_desc.pins[group_selector].name,
+ pef2256->pinctrl.functions[func_selector].name);
+
+ /* We map 1 group <-> 1 pin */
+ pinreg_desc = pef2256->pinctrl.pctrl_desc.pins[group_selector].drv_data;
+ func_val = pef2256->pinctrl.functions[func_selector].func_val;
+
+ pef2256_clrsetbits8(pef2256, pinreg_desc->offset, pinreg_desc->mask,
+ func_val & pinreg_desc->mask);
+
+ return 0;
+}
+
+static const struct pinmux_ops pef2256_pmxops = {
+ .get_functions_count = pef2256_get_functions_count,
+ .get_function_name = pef2256_get_function_name,
+ .get_function_groups = pef2256_get_function_groups,
+ .set_mux = pef2256_set_mux,
+};
+
+#define PEF2256_PINCTRL_PIN(_number, _name, _offset, _mask) { \
+ .number = _number, \
+ .name = _name, \
+ .drv_data = &(struct pef2256_pinreg_desc) { \
+ .offset = _offset, \
+ .mask = _mask, \
+ }, \
+}
+
+static const struct pinctrl_pin_desc pef2256_v12_pins[] = {
+ PEF2256_PINCTRL_PIN(0, "RPA", PEF2256_PC1, PEF2256_12_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(1, "RPB", PEF2256_PC2, PEF2256_12_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(2, "RPC", PEF2256_PC3, PEF2256_12_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(3, "RPD", PEF2256_PC4, PEF2256_12_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(4, "XPA", PEF2256_PC1, PEF2256_12_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(5, "XPB", PEF2256_PC2, PEF2256_12_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(6, "XPC", PEF2256_PC3, PEF2256_12_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(7, "XPD", PEF2256_PC4, PEF2256_12_PC_XPC_MASK),
+};
+
+static const struct pinctrl_pin_desc pef2256_v2x_pins[] = {
+ PEF2256_PINCTRL_PIN(0, "RPA", PEF2256_PC1, PEF2256_2X_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(1, "RPB", PEF2256_PC2, PEF2256_2X_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(2, "RPC", PEF2256_PC3, PEF2256_2X_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(3, "RPD", PEF2256_PC4, PEF2256_2X_PC_RPC_MASK),
+ PEF2256_PINCTRL_PIN(4, "XPA", PEF2256_PC1, PEF2256_2X_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(5, "XPB", PEF2256_PC2, PEF2256_2X_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(6, "XPC", PEF2256_PC3, PEF2256_2X_PC_XPC_MASK),
+ PEF2256_PINCTRL_PIN(7, "XPD", PEF2256_PC4, PEF2256_2X_PC_XPC_MASK),
+};
+
+static const char *const pef2256_rp_groups[] = { "RPA", "RPB", "RPC", "RPD" };
+static const char *const pef2256_xp_groups[] = { "XPA", "XPB", "XPC", "XPD" };
+static const char *const pef2256_all_groups[] = { "RPA", "RPB", "RPC", "RPD",
+ "XPA", "XPB", "XPC", "XPD" };
+
+#define PEF2256_FUNCTION(_name, _func_val, _groups) { \
+ .name = _name, \
+ .groups = _groups, \
+ .ngroups = ARRAY_SIZE(_groups), \
+ .func_val = _func_val, \
+}
+
+static const struct pef2256_function_desc pef2256_v2x_functions[] = {
+ PEF2256_FUNCTION("SYPR", PEF2256_2X_PC_RPC_SYPR, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFM", PEF2256_2X_PC_RPC_RFM, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFMB", PEF2256_2X_PC_RPC_RFMB, pef2256_rp_groups),
+ PEF2256_FUNCTION("RSIGM", PEF2256_2X_PC_RPC_RSIGM, pef2256_rp_groups),
+ PEF2256_FUNCTION("RSIG", PEF2256_2X_PC_RPC_RSIG, pef2256_rp_groups),
+ PEF2256_FUNCTION("DLR", PEF2256_2X_PC_RPC_DLR, pef2256_rp_groups),
+ PEF2256_FUNCTION("FREEZE", PEF2256_2X_PC_RPC_FREEZE, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFSP", PEF2256_2X_PC_RPC_RFSP, pef2256_rp_groups),
+ PEF2256_FUNCTION("LOS", PEF2256_2X_PC_RPC_LOS, pef2256_rp_groups),
+
+ PEF2256_FUNCTION("SYPX", PEF2256_2X_PC_XPC_SYPX, pef2256_xp_groups),
+ PEF2256_FUNCTION("XFMS", PEF2256_2X_PC_XPC_XFMS, pef2256_xp_groups),
+ PEF2256_FUNCTION("XSIG", PEF2256_2X_PC_XPC_XSIG, pef2256_xp_groups),
+ PEF2256_FUNCTION("TCLK", PEF2256_2X_PC_XPC_TCLK, pef2256_xp_groups),
+ PEF2256_FUNCTION("XMFB", PEF2256_2X_PC_XPC_XMFB, pef2256_xp_groups),
+ PEF2256_FUNCTION("XSIGM", PEF2256_2X_PC_XPC_XSIGM, pef2256_xp_groups),
+ PEF2256_FUNCTION("DLX", PEF2256_2X_PC_XPC_DLX, pef2256_xp_groups),
+ PEF2256_FUNCTION("XCLK", PEF2256_2X_PC_XPC_XCLK, pef2256_xp_groups),
+ PEF2256_FUNCTION("XLT", PEF2256_2X_PC_XPC_XLT, pef2256_xp_groups),
+
+ PEF2256_FUNCTION("GPI", PEF2256_2X_PC_RPC_GPI | PEF2256_2X_PC_XPC_GPI,
+ pef2256_all_groups),
+ PEF2256_FUNCTION("GPOH", PEF2256_2X_PC_RPC_GPOH | PEF2256_2X_PC_XPC_GPOH,
+ pef2256_all_groups),
+ PEF2256_FUNCTION("GPOL", PEF2256_2X_PC_RPC_GPOL | PEF2256_2X_PC_XPC_GPOL,
+ pef2256_all_groups),
+};
+
+static const struct pef2256_function_desc pef2256_v12_functions[] = {
+ PEF2256_FUNCTION("SYPR", PEF2256_12_PC_RPC_SYPR, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFM", PEF2256_12_PC_RPC_RFM, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFMB", PEF2256_12_PC_RPC_RFMB, pef2256_rp_groups),
+ PEF2256_FUNCTION("RSIGM", PEF2256_12_PC_RPC_RSIGM, pef2256_rp_groups),
+ PEF2256_FUNCTION("RSIG", PEF2256_12_PC_RPC_RSIG, pef2256_rp_groups),
+ PEF2256_FUNCTION("DLR", PEF2256_12_PC_RPC_DLR, pef2256_rp_groups),
+ PEF2256_FUNCTION("FREEZE", PEF2256_12_PC_RPC_FREEZE, pef2256_rp_groups),
+ PEF2256_FUNCTION("RFSP", PEF2256_12_PC_RPC_RFSP, pef2256_rp_groups),
+
+ PEF2256_FUNCTION("SYPX", PEF2256_12_PC_XPC_SYPX, pef2256_xp_groups),
+ PEF2256_FUNCTION("XFMS", PEF2256_12_PC_XPC_XFMS, pef2256_xp_groups),
+ PEF2256_FUNCTION("XSIG", PEF2256_12_PC_XPC_XSIG, pef2256_xp_groups),
+ PEF2256_FUNCTION("TCLK", PEF2256_12_PC_XPC_TCLK, pef2256_xp_groups),
+ PEF2256_FUNCTION("XMFB", PEF2256_12_PC_XPC_XMFB, pef2256_xp_groups),
+ PEF2256_FUNCTION("XSIGM", PEF2256_12_PC_XPC_XSIGM, pef2256_xp_groups),
+ PEF2256_FUNCTION("DLX", PEF2256_12_PC_XPC_DLX, pef2256_xp_groups),
+ PEF2256_FUNCTION("XCLK", PEF2256_12_PC_XPC_XCLK, pef2256_xp_groups),
+ PEF2256_FUNCTION("XLT", PEF2256_12_PC_XPC_XLT, pef2256_xp_groups),
+};
+
+
+static int pef2256_register_pinctrl(struct pef2256 *pef2256)
+{
+ struct pinctrl_dev *pctrl;
+
+ pef2256->pinctrl.pctrl_desc.name = dev_name(pef2256->dev);
+ pef2256->pinctrl.pctrl_desc.owner = THIS_MODULE;
+ pef2256->pinctrl.pctrl_desc.pctlops = &pef2256_pctlops;
+ pef2256->pinctrl.pctrl_desc.pmxops = &pef2256_pmxops;
+ if (pef2256->version == PEF2256_VERSION_1_2) {
+ pef2256->pinctrl.pctrl_desc.pins = pef2256_v12_pins;
+ pef2256->pinctrl.pctrl_desc.npins = ARRAY_SIZE(pef2256_v12_pins);
+ pef2256->pinctrl.functions = pef2256_v12_functions;
+ pef2256->pinctrl.nfunctions = ARRAY_SIZE(pef2256_v12_functions);
+ } else {
+ pef2256->pinctrl.pctrl_desc.pins = pef2256_v2x_pins;
+ pef2256->pinctrl.pctrl_desc.npins = ARRAY_SIZE(pef2256_v2x_pins);
+ pef2256->pinctrl.functions = pef2256_v2x_functions;
+ pef2256->pinctrl.nfunctions = ARRAY_SIZE(pef2256_v2x_functions);
+ }
+
+ pctrl = devm_pinctrl_register(pef2256->dev, &pef2256->pinctrl.pctrl_desc, pef2256);
+ if (IS_ERR(pctrl)) {
+ dev_err(pef2256->dev, "pinctrl driver registration failed\n");
+ return PTR_ERR(pctrl);
+ }
+
+ return 0;
+}
+
+static void pef2256_reset_pinmux(struct pef2256 *pef2256)
+{
+ u8 val;
+ /*
+ * Reset values cannot be used.
+ * They define the SYPR/SYPX pin mux for all the RPx and XPx pins and
+ * Only one pin can be muxed to SYPR and one pin can be muxed to SYPX.
+ * Choose here an other reset value.
+ */
+ if (pef2256->version == PEF2256_VERSION_1_2)
+ val = PEF2256_12_PC_XPC_XCLK | PEF2256_12_PC_RPC_RFSP;
+ else
+ val = PEF2256_2X_PC_XPC_GPI | PEF2256_2X_PC_RPC_GPI;
+
+ pef2256_write8(pef2256, PEF2256_PC1, val);
+ pef2256_write8(pef2256, PEF2256_PC2, val);
+ pef2256_write8(pef2256, PEF2256_PC3, val);
+ pef2256_write8(pef2256, PEF2256_PC4, val);
+}
+
+static ssize_t subordinate_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct pef2256 *pef2256 = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", pef2256->is_subordinate);
+}
+
+static ssize_t subordinate_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pef2256 *pef2256 = dev_get_drvdata(dev);
+ int ret;
+
+ if (strtobool(buf, &pef2256->is_subordinate) < 0)
+ return -EINVAL;
+
+ ret = pef2256_setup(pef2256);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(subordinate);
+
+static const struct attribute_group pef2256_attribute_group = {
+ .attrs = (struct attribute *[]) {
+ &dev_attr_subordinate.attr,
+ NULL,
+ },
+};
+
+static int pef2256_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ unsigned long sclkr_rate, sclkx_rate;
+ struct pef2256 *pef2256;
+ int ret;
+ int irq;
+
+ pef2256 = devm_kzalloc(&pdev->dev, sizeof(*pef2256), GFP_KERNEL);
+ if (!pef2256)
+ return -ENOMEM;
+
+ pef2256->dev = &pdev->dev;
+ ATOMIC_INIT_NOTIFIER_HEAD(&pef2256->event_notifier_list);
+
+ pef2256->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pef2256->regs))
+ return PTR_ERR(pef2256->regs);
+
+ pef2256->mclk = devm_clk_get_enabled(&pdev->dev, "mclk");
+ if (IS_ERR(pef2256->mclk))
+ return PTR_ERR(pef2256->mclk);
+ dev_dbg(pef2256->dev, "mclk %lu Hz\n", clk_get_rate(pef2256->mclk));
+
+ pef2256->sclkr = devm_clk_get_enabled(&pdev->dev, "sclkr");
+ if (IS_ERR(pef2256->sclkr))
+ return PTR_ERR(pef2256->sclkr);
+
+ pef2256->sclkx = devm_clk_get_enabled(&pdev->dev, "sclkx");
+ if (IS_ERR(pef2256->sclkx))
+ return PTR_ERR(pef2256->sclkx);
+
+ /*
+ * Both SCLKR (receive) and SCLKX (transmit) must have the same rate,
+ * stored as sysclk_rate.
+ * The exact value will be checked at pef2256_check_rates()
+ */
+ sclkr_rate = clk_get_rate(pef2256->sclkr);
+ sclkx_rate = clk_get_rate(pef2256->sclkx);
+ dev_dbg(pef2256->dev, "sclkr %lu Hz\n", sclkr_rate);
+ dev_dbg(pef2256->dev, "sclkx %lu Hz\n", sclkx_rate);
+ if (sclkr_rate != sclkx_rate) {
+ dev_err(pef2256->dev, "clk rate mismatch. sclkr %lu Hz, sclkx %lu Hz\n",
+ sclkr_rate, sclkx_rate);
+ return -EINVAL;
+ }
+ pef2256->sysclk_rate = sclkr_rate;
+
+ /* Reset the component. The MCLK clock must be active during reset */
+ pef2256->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(pef2256->reset_gpio))
+ return PTR_ERR(pef2256->reset_gpio);
+ if (pef2256->reset_gpio) {
+ gpiod_set_value_cansleep(pef2256->reset_gpio, 1);
+ udelay(10);
+ gpiod_set_value_cansleep(pef2256->reset_gpio, 0);
+ udelay(10);
+ }
+
+ pef2256->version = pef2256_get_version(pef2256);
+ if (pef2256->version == PEF2256_VERSION_UNKNOWN)
+ return -ENODEV;
+
+ ret = pef2556_of_parse(pef2256, np);
+ if (ret)
+ return ret;
+
+ /* Disable interrupts */
+ pef2256_write8(pef2256, PEF2256_IMR0, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR1, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR2, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR3, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR4, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR5, 0xff);
+
+ /* Clear any pending interrupts */
+ pef2256_read8(pef2256, PEF2256_ISR0);
+ pef2256_read8(pef2256, PEF2256_ISR1);
+ pef2256_read8(pef2256, PEF2256_ISR2);
+ pef2256_read8(pef2256, PEF2256_ISR3);
+ pef2256_read8(pef2256, PEF2256_ISR4);
+ pef2256_read8(pef2256, PEF2256_ISR5);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+ ret = devm_request_irq(pef2256->dev, irq, pef2256_irq_handler, 0, "pef2256", pef2256);
+ if (ret < 0)
+ return ret;
+
+ pef2256_reset_pinmux(pef2256);
+ ret = pef2256_register_pinctrl(pef2256);
+ if (ret)
+ return ret;
+
+ /*
+ * We are going to reset the E1 lines during setup() call and the ISR2
+ * interrupt used to detect the carrier state changed is masked.
+ * It is time to initialize our internal carrier state flag.
+ */
+ atomic_set(&pef2256->carrier, 0);
+
+ ret = pef2256_setup(pef2256);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, pef2256);
+
+ ret = sysfs_create_group(&pef2256->dev->kobj, &pef2256_attribute_group);
+ if (ret < 0) {
+ dev_err(pef2256->dev, "sysfs registration failed (%d)\n", ret);
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+ }
+
+ ret = devm_of_platform_populate(pef2256->dev);
+ if (ret < 0) {
+ dev_err(pef2256->dev, "platform populate failed (%d)\n", ret);
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int pef2256_remove(struct platform_device *pdev)
+{
+ struct pef2256 *pef2256 = platform_get_drvdata(pdev);
+
+ /* Disable interrupts */
+ pef2256_write8(pef2256, PEF2256_IMR0, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR1, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR2, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR3, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR4, 0xff);
+ pef2256_write8(pef2256, PEF2256_IMR5, 0xff);
+
+ sysfs_remove_group(&pef2256->dev->kobj, &pef2256_attribute_group);
+
+ return 0;
+}
+
+static const struct of_device_id pef2256_id_table[] = {
+ { .compatible = "lantiq,pef2256" },
+ {} /* sentinel */
+};
+MODULE_DEVICE_TABLE(of, pef2256_id_table);
+
+static struct platform_driver pef2256_driver = {
+ .driver = {
+ .name = "lantiq-pef2256",
+ .of_match_table = pef2256_id_table,
+ },
+ .probe = pef2256_probe,
+ .remove = pef2256_remove,
+};
+module_platform_driver(pef2256_driver);
+
+int pef2256_register_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&pef2256->event_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(pef2256_register_event_notifier);
+
+int pef2256_unregister_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb)
+{
+ return atomic_notifier_chain_unregister(&pef2256->event_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(pef2256_unregister_event_notifier);
+
+bool pef2256_get_carrier(struct pef2256 *pef2256)
+{
+ return !!atomic_read(&pef2256->carrier);
+}
+EXPORT_SYMBOL_GPL(pef2256_get_carrier);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("PEF2256 driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/pef2256.h b/include/linux/mfd/pef2256.h
new file mode 100644
index 000000000000..0c0afcefa3ef
--- /dev/null
+++ b/include/linux/mfd/pef2256.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * PEF2256 management
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+#ifndef __PEF2256_H__
+#define __PEF2256_H__
+
+#include <linux/types.h>
+
+struct pef2256;
+struct notifier_block;
+
+enum pef2256_event {
+ PEF2256_EVENT_CARRIER, /* Carrier state changed */
+};
+
+/* The nb.notifier_call function registered must not sleep */
+int pef2256_register_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb);
+int pef2256_unregister_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb);
+
+/* Retrieve carrier state. true: carrier on, false: carrier off */
+bool pef2256_get_carrier(struct pef2256 *pef2256);
+
+#endif /* __PEF2256_H__ */
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 3/5] Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
` (3 preceding siblings ...)
2023-03-28 7:48 ` Herve Codina via Alsa-devel
@ 2023-03-28 7:48 ` Herve Codina via Alsa-devel
2023-03-28 7:48 ` Herve Codina
` (4 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Herve Codina via Alsa-devel @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
[-- Attachment #0: Type: message/rfc822, Size: 4985 bytes --]
From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>, Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Christophe Leroy <christophe.leroy@csgroup.eu>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v4 3/5] Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry
Date: Tue, 28 Mar 2023 09:48:09 +0200
Message-ID: <20230328074811.594361-4-herve.codina@bootlin.com>
Document the "subordinate" sysfs attribute exposed by the PEF2256
driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
.../ABI/testing/sysfs-bus-platform-devices-pef2256 | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256
diff --git a/Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256 b/Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256
new file mode 100644
index 000000000000..95ba1ae55daf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256
@@ -0,0 +1,12 @@
+What: /sys/bus/platform/devices/*.pef2256/subordinate
+KernelVersion: 6.4
+Contact: Herve Codina <herve.codina@bootlin.com>
+Description:
+ (RW) Controls whether the PEF2256 works as subordinate or main
+ device mode.
+
+ - 0: main device mode
+ - 1: subordinate mode
+
+ In subordinate device mode it synchronizes on line interface
+ clock signals. Otherwise, it synchronizes on internal clocks.
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 3/5] Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
` (4 preceding siblings ...)
2023-03-28 7:48 ` [PATCH v4 3/5] Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry Herve Codina via Alsa-devel
@ 2023-03-28 7:48 ` Herve Codina
2023-03-28 7:48 ` [PATCH v4 4/5] ASoC: codecs: Add support for the Lantiq PEF2256 codec Herve Codina via Alsa-devel
` (3 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Herve Codina @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
Document the "subordinate" sysfs attribute exposed by the PEF2256
driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
.../ABI/testing/sysfs-bus-platform-devices-pef2256 | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256
diff --git a/Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256 b/Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256
new file mode 100644
index 000000000000..95ba1ae55daf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256
@@ -0,0 +1,12 @@
+What: /sys/bus/platform/devices/*.pef2256/subordinate
+KernelVersion: 6.4
+Contact: Herve Codina <herve.codina@bootlin.com>
+Description:
+ (RW) Controls whether the PEF2256 works as subordinate or main
+ device mode.
+
+ - 0: main device mode
+ - 1: subordinate mode
+
+ In subordinate device mode it synchronizes on line interface
+ clock signals. Otherwise, it synchronizes on internal clocks.
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 4/5] ASoC: codecs: Add support for the Lantiq PEF2256 codec
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
` (5 preceding siblings ...)
2023-03-28 7:48 ` Herve Codina
@ 2023-03-28 7:48 ` Herve Codina via Alsa-devel
2023-03-28 7:48 ` Herve Codina
` (2 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Herve Codina via Alsa-devel @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
[-- Attachment #0: Type: message/rfc822, Size: 18277 bytes --]
From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>, Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Christophe Leroy <christophe.leroy@csgroup.eu>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v4 4/5] ASoC: codecs: Add support for the Lantiq PEF2256 codec
Date: Tue, 28 Mar 2023 09:48:10 +0200
Message-ID: <20230328074811.594361-5-herve.codina@bootlin.com>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
The codec support allows to use some of the PCM system highway
time-slots as audio channels to transport audio data over the E1/T1/J1
lines. It provides also line carrier detection events reported through
the ALSA jack detection feature.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
sound/soc/codecs/Kconfig | 14 ++
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/pef2256-codec.c | 390 +++++++++++++++++++++++++++++++
3 files changed, 406 insertions(+)
create mode 100644 sound/soc/codecs/pef2256-codec.c
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 0be061953e9a..4f78da914fc7 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -168,6 +168,7 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_PCM512x_I2C
imply SND_SOC_PCM512x_SPI
imply SND_SOC_PEB2466
+ imply SND_SOC_PEF2256
imply SND_SOC_RK3328
imply SND_SOC_RK817
imply SND_SOC_RT274
@@ -1252,6 +1253,19 @@ config SND_SOC_PEB2466
To compile this driver as a module, choose M here: the module
will be called snd-soc-peb2466.
+config SND_SOC_PEF2256
+ tristate "Lantiq PEF2256 codec"
+ depends on MFD_PEF2256
+ help
+ Enable support for the Lantiq PEF2256 (FALC56) codec.
+ The PEF2256 is a framer and line interface between analog E1/T1/J1
+ line and a digital PCM bus.
+ This codec allows to use some of the time slots available on the
+ PEF2256 PCM bus to transport some audio data.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-soc-pef2256.
+
config SND_SOC_RK3328
tristate "Rockchip RK3328 audio CODEC"
select REGMAP_MMIO
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 20b388b77f1f..11bd66d46f7b 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -188,6 +188,7 @@ snd-soc-pcm512x-objs := pcm512x.o
snd-soc-pcm512x-i2c-objs := pcm512x-i2c.o
snd-soc-pcm512x-spi-objs := pcm512x-spi.o
snd-soc-peb2466-objs := peb2466.o
+snd-soc-pef2256-objs := pef2256-codec.o
snd-soc-rk3328-objs := rk3328_codec.o
snd-soc-rk817-objs := rk817_codec.o
snd-soc-rl6231-objs := rl6231.o
@@ -551,6 +552,7 @@ obj-$(CONFIG_SND_SOC_PCM512x) += snd-soc-pcm512x.o
obj-$(CONFIG_SND_SOC_PCM512x_I2C) += snd-soc-pcm512x-i2c.o
obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o
obj-$(CONFIG_SND_SOC_PEB2466) += snd-soc-peb2466.o
+obj-$(CONFIG_SND_SOC_PEF2256) += snd-soc-pef2256.o
obj-$(CONFIG_SND_SOC_RK3328) += snd-soc-rk3328.o
obj-$(CONFIG_SND_SOC_RK817) += snd-soc-rk817.o
obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o
diff --git a/sound/soc/codecs/pef2256-codec.c b/sound/soc/codecs/pef2256-codec.c
new file mode 100644
index 000000000000..d87fdc771a30
--- /dev/null
+++ b/sound/soc/codecs/pef2256-codec.c
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// pef2256.c -- Lantiq PEF2256 ALSA SoC driver
+//
+// Copyright 2023 CS GROUP France
+//
+// Author: Herve Codina <herve.codina@bootlin.com>
+
+#include <linux/clk.h>
+#include <linux/mfd/pef2256.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/jack.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#define PEF2256_NB_CHANNEL 32
+#define PEF2256_JACK_MASK (SND_JACK_LINEIN | SND_JACK_LINEOUT)
+
+struct pef2256_codec {
+ struct pef2256 *pef2256;
+ struct device *dev;
+ struct snd_soc_jack jack;
+ struct notifier_block nb;
+ struct work_struct carrier_work;
+ int max_chan_playback;
+ int max_chan_capture;
+};
+
+static int pef2256_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int rx_mask, int slots, int width)
+{
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ switch (width) {
+ case 0:
+ /* Not set -> default 8 */
+ case 8:
+ break;
+ default:
+ dev_err(dai->dev, "tdm slot width %d not supported\n", width);
+ return -EINVAL;
+ }
+
+ pef2256->max_chan_playback = hweight32(tx_mask);
+ if (pef2256->max_chan_playback > PEF2256_NB_CHANNEL) {
+ dev_err(dai->dev, "too much tx slots defined (mask = 0x%x) support max %d\n",
+ tx_mask, PEF2256_NB_CHANNEL);
+ return -EINVAL;
+ }
+
+ pef2256->max_chan_capture = hweight32(rx_mask);
+ if (pef2256->max_chan_capture > PEF2256_NB_CHANNEL) {
+ dev_err(dai->dev, "too much rx slots defined (mask = 0x%x) support max %d\n",
+ rx_mask, PEF2256_NB_CHANNEL);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * The constraints for format/channel is to match with the number of 8bit
+ * time-slots available.
+ */
+static int pef2256_dai_hw_rule_channels_by_format(struct snd_soc_dai *dai,
+ struct snd_pcm_hw_params *params,
+ unsigned int nb_ts)
+{
+ struct snd_interval *c = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
+ snd_pcm_format_t format = params_format(params);
+ struct snd_interval ch = {0};
+
+ switch (snd_pcm_format_physical_width(format)) {
+ case 8:
+ ch.max = nb_ts;
+ break;
+ case 16:
+ ch.max = nb_ts/2;
+ break;
+ case 32:
+ ch.max = nb_ts/4;
+ break;
+ case 64:
+ ch.max = nb_ts/8;
+ break;
+ default:
+ dev_err(dai->dev, "format physical width %u not supported\n",
+ snd_pcm_format_physical_width(format));
+ return -EINVAL;
+ }
+
+ ch.min = ch.max ? 1 : 0;
+
+ return snd_interval_refine(c, &ch);
+}
+
+static int pef2256_dai_hw_rule_playback_channels_by_format(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_soc_dai *dai = rule->private;
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ return pef2256_dai_hw_rule_channels_by_format(dai, params, pef2256->max_chan_playback);
+}
+
+static int pef2256_dai_hw_rule_capture_channels_by_format(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_soc_dai *dai = rule->private;
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ return pef2256_dai_hw_rule_channels_by_format(dai, params, pef2256->max_chan_capture);
+}
+
+static int pef2256_dai_hw_rule_format_by_channels(struct snd_soc_dai *dai,
+ struct snd_pcm_hw_params *params,
+ unsigned int nb_ts)
+{
+ struct snd_mask *f_old = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ unsigned int channels = params_channels(params);
+ unsigned int slot_width;
+ struct snd_mask f_new;
+ unsigned int i;
+
+ if (!channels || channels > nb_ts) {
+ dev_err(dai->dev, "channels %u not supported\n", nb_ts);
+ return -EINVAL;
+ }
+
+ slot_width = (nb_ts / channels) * 8;
+
+ snd_mask_none(&f_new);
+ for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) {
+ if (snd_mask_test(f_old, i)) {
+ if (snd_pcm_format_physical_width(i) <= slot_width)
+ snd_mask_set(&f_new, i);
+ }
+ }
+
+ return snd_mask_refine(f_old, &f_new);
+}
+
+static int pef2256_dai_hw_rule_playback_format_by_channels(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_soc_dai *dai = rule->private;
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ return pef2256_dai_hw_rule_format_by_channels(dai, params, pef2256->max_chan_playback);
+}
+
+static int pef2256_dai_hw_rule_capture_format_by_channels(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_soc_dai *dai = rule->private;
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ return pef2256_dai_hw_rule_format_by_channels(dai, params, pef2256->max_chan_capture);
+}
+
+static u64 pef2256_formats(u8 nb_ts)
+{
+ u64 formats;
+ unsigned int chan_width;
+ unsigned int format_width;
+ int i;
+
+ if (!nb_ts)
+ return 0;
+
+ formats = 0;
+ chan_width = nb_ts * 8;
+ for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) {
+ /* Support physical width multiple of 8bit */
+ format_width = snd_pcm_format_physical_width(i);
+ if (format_width == 0 || format_width % 8)
+ continue;
+
+ /*
+ * And support physical width that can fit N times in the
+ * channel
+ */
+ if (format_width > chan_width || chan_width % format_width)
+ continue;
+
+ formats |= (1ULL << i);
+ }
+ return formats;
+}
+
+static int pef2256_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+ snd_pcm_hw_rule_func_t hw_rule_channels_by_format;
+ snd_pcm_hw_rule_func_t hw_rule_format_by_channels;
+ unsigned int frame_bits;
+ u64 format;
+ int ret;
+
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ format = pef2256_formats(pef2256->max_chan_capture);
+ hw_rule_channels_by_format = pef2256_dai_hw_rule_capture_channels_by_format;
+ hw_rule_format_by_channels = pef2256_dai_hw_rule_capture_format_by_channels;
+ frame_bits = pef2256->max_chan_capture * 8;
+ } else {
+ format = pef2256_formats(pef2256->max_chan_playback);
+ hw_rule_channels_by_format = pef2256_dai_hw_rule_playback_channels_by_format;
+ hw_rule_format_by_channels = pef2256_dai_hw_rule_playback_format_by_channels;
+ frame_bits = pef2256->max_chan_playback * 8;
+ }
+
+ ret = snd_pcm_hw_constraint_mask64(substream->runtime,
+ SNDRV_PCM_HW_PARAM_FORMAT, format);
+ if (ret) {
+ dev_err(dai->dev, "Failed to add format constraint (%d)\n", ret);
+ return ret;
+ }
+
+ ret = snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+ hw_rule_channels_by_format, dai,
+ SNDRV_PCM_HW_PARAM_FORMAT, -1);
+ if (ret) {
+ dev_err(dai->dev, "Failed to add channels rule (%d)\n", ret);
+ return ret;
+ }
+
+ ret = snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT,
+ hw_rule_format_by_channels, dai,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ if (ret) {
+ dev_err(dai->dev, "Failed to add format rule (%d)\n", ret);
+ return ret;
+ }
+
+ ret = snd_pcm_hw_constraint_single(substream->runtime,
+ SNDRV_PCM_HW_PARAM_FRAME_BITS,
+ frame_bits);
+ if (ret < 0) {
+ dev_err(dai->dev, "Failed to add frame_bits constraint (%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static u64 pef2256_dai_formats[] = {
+ SND_SOC_POSSIBLE_DAIFMT_DSP_B,
+};
+
+static const struct snd_soc_dai_ops pef2256_dai_ops = {
+ .startup = pef2256_dai_startup,
+ .set_tdm_slot = pef2256_dai_set_tdm_slot,
+ .auto_selectable_formats = pef2256_dai_formats,
+ .num_auto_selectable_formats = ARRAY_SIZE(pef2256_dai_formats),
+};
+
+static struct snd_soc_dai_driver pef2256_dai_driver = {
+ .name = "pef2256",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = PEF2256_NB_CHANNEL,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = U64_MAX, /* Will be refined on DAI .startup() */
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = PEF2256_NB_CHANNEL,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = U64_MAX, /* Will be refined on DAI .startup() */
+ },
+ .ops = &pef2256_dai_ops,
+};
+
+static void pef2256_carrier_work(struct work_struct *work)
+{
+ struct pef2256_codec *pef2256 = container_of(work, struct pef2256_codec, carrier_work);
+ int status;
+
+ status = pef2256_get_carrier(pef2256->pef2256) ? PEF2256_JACK_MASK : 0;
+ snd_soc_jack_report(&pef2256->jack, status, PEF2256_JACK_MASK);
+}
+
+static int pef2256_carrier_notifier(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct pef2256_codec *pef2256 = container_of(nb, struct pef2256_codec, nb);
+
+ switch (action) {
+ case PEF2256_EVENT_CARRIER:
+ queue_work(system_power_efficient_wq, &pef2256->carrier_work);
+ break;
+ default:
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_OK;
+}
+
+static int pef2256_component_probe(struct snd_soc_component *component)
+{
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(component);
+ char *name;
+ int ret;
+
+ INIT_WORK(&pef2256->carrier_work, pef2256_carrier_work);
+
+ name = "carrier";
+ if (component->name_prefix) {
+ name = kasprintf(GFP_KERNEL, "%s carrier", component->name_prefix);
+ if (!name)
+ return -ENOMEM;
+ }
+
+ ret = snd_soc_card_jack_new(component->card, name, PEF2256_JACK_MASK, &pef2256->jack);
+ if (component->name_prefix)
+ kfree(name); /* A copy is done by snd_soc_card_jack_new */
+ if (ret) {
+ dev_err(component->dev, "Cannot create jack\n");
+ return ret;
+ }
+
+ pef2256->nb.notifier_call = pef2256_carrier_notifier;
+ ret = pef2256_register_event_notifier(pef2256->pef2256, &pef2256->nb);
+ if (ret) {
+ dev_err(component->dev, "Cannot register event notifier\n");
+ return ret;
+ }
+
+ /* Queue work to set the initial value */
+ queue_work(system_power_efficient_wq, &pef2256->carrier_work);
+
+ return 0;
+}
+
+static void pef2256_component_remove(struct snd_soc_component *component)
+{
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(component);
+
+ pef2256_unregister_event_notifier(pef2256->pef2256, &pef2256->nb);
+ cancel_work_sync(&pef2256->carrier_work);
+}
+
+static const struct snd_soc_component_driver pef2256_component_driver = {
+ .probe = pef2256_component_probe,
+ .remove = pef2256_component_remove,
+ .endianness = 1,
+};
+
+static int pef2256_codec_probe(struct platform_device *pdev)
+{
+ struct pef2256_codec *pef2256;
+
+ pef2256 = devm_kzalloc(&pdev->dev, sizeof(*pef2256), GFP_KERNEL);
+ if (!pef2256)
+ return -ENOMEM;
+
+ pef2256->dev = &pdev->dev;
+ pef2256->pef2256 = dev_get_drvdata(pef2256->dev->parent);
+
+ platform_set_drvdata(pdev, pef2256);
+
+ return devm_snd_soc_register_component(&pdev->dev, &pef2256_component_driver,
+ &pef2256_dai_driver, 1);
+}
+
+static const struct of_device_id pef2256_codec_of_match[] = {
+ { .compatible = "lantiq,pef2256-codec" },
+ {} /* sentinel */
+};
+MODULE_DEVICE_TABLE(of, pef2256_codec_of_match);
+
+static struct platform_driver pef2256_codec_driver = {
+ .driver = {
+ .name = "lantiq-pef2256-codec",
+ .of_match_table = pef2256_codec_of_match,
+ },
+ .probe = pef2256_codec_probe,
+};
+module_platform_driver(pef2256_codec_driver);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("PEF2256 ALSA SoC driver");
+MODULE_LICENSE("GPL");
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 4/5] ASoC: codecs: Add support for the Lantiq PEF2256 codec
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
` (6 preceding siblings ...)
2023-03-28 7:48 ` [PATCH v4 4/5] ASoC: codecs: Add support for the Lantiq PEF2256 codec Herve Codina via Alsa-devel
@ 2023-03-28 7:48 ` Herve Codina
2023-03-28 7:48 ` [PATCH v4 5/5] MAINTAINERS: Add the Lantiq PEF2256 driver entry Herve Codina via Alsa-devel
2023-03-28 7:48 ` Herve Codina
9 siblings, 0 replies; 12+ messages in thread
From: Herve Codina @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
The codec support allows to use some of the PCM system highway
time-slots as audio channels to transport audio data over the E1/T1/J1
lines. It provides also line carrier detection events reported through
the ALSA jack detection feature.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
sound/soc/codecs/Kconfig | 14 ++
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/pef2256-codec.c | 390 +++++++++++++++++++++++++++++++
3 files changed, 406 insertions(+)
create mode 100644 sound/soc/codecs/pef2256-codec.c
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 0be061953e9a..4f78da914fc7 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -168,6 +168,7 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_PCM512x_I2C
imply SND_SOC_PCM512x_SPI
imply SND_SOC_PEB2466
+ imply SND_SOC_PEF2256
imply SND_SOC_RK3328
imply SND_SOC_RK817
imply SND_SOC_RT274
@@ -1252,6 +1253,19 @@ config SND_SOC_PEB2466
To compile this driver as a module, choose M here: the module
will be called snd-soc-peb2466.
+config SND_SOC_PEF2256
+ tristate "Lantiq PEF2256 codec"
+ depends on MFD_PEF2256
+ help
+ Enable support for the Lantiq PEF2256 (FALC56) codec.
+ The PEF2256 is a framer and line interface between analog E1/T1/J1
+ line and a digital PCM bus.
+ This codec allows to use some of the time slots available on the
+ PEF2256 PCM bus to transport some audio data.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-soc-pef2256.
+
config SND_SOC_RK3328
tristate "Rockchip RK3328 audio CODEC"
select REGMAP_MMIO
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 20b388b77f1f..11bd66d46f7b 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -188,6 +188,7 @@ snd-soc-pcm512x-objs := pcm512x.o
snd-soc-pcm512x-i2c-objs := pcm512x-i2c.o
snd-soc-pcm512x-spi-objs := pcm512x-spi.o
snd-soc-peb2466-objs := peb2466.o
+snd-soc-pef2256-objs := pef2256-codec.o
snd-soc-rk3328-objs := rk3328_codec.o
snd-soc-rk817-objs := rk817_codec.o
snd-soc-rl6231-objs := rl6231.o
@@ -551,6 +552,7 @@ obj-$(CONFIG_SND_SOC_PCM512x) += snd-soc-pcm512x.o
obj-$(CONFIG_SND_SOC_PCM512x_I2C) += snd-soc-pcm512x-i2c.o
obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o
obj-$(CONFIG_SND_SOC_PEB2466) += snd-soc-peb2466.o
+obj-$(CONFIG_SND_SOC_PEF2256) += snd-soc-pef2256.o
obj-$(CONFIG_SND_SOC_RK3328) += snd-soc-rk3328.o
obj-$(CONFIG_SND_SOC_RK817) += snd-soc-rk817.o
obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o
diff --git a/sound/soc/codecs/pef2256-codec.c b/sound/soc/codecs/pef2256-codec.c
new file mode 100644
index 000000000000..d87fdc771a30
--- /dev/null
+++ b/sound/soc/codecs/pef2256-codec.c
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// pef2256.c -- Lantiq PEF2256 ALSA SoC driver
+//
+// Copyright 2023 CS GROUP France
+//
+// Author: Herve Codina <herve.codina@bootlin.com>
+
+#include <linux/clk.h>
+#include <linux/mfd/pef2256.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/jack.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#define PEF2256_NB_CHANNEL 32
+#define PEF2256_JACK_MASK (SND_JACK_LINEIN | SND_JACK_LINEOUT)
+
+struct pef2256_codec {
+ struct pef2256 *pef2256;
+ struct device *dev;
+ struct snd_soc_jack jack;
+ struct notifier_block nb;
+ struct work_struct carrier_work;
+ int max_chan_playback;
+ int max_chan_capture;
+};
+
+static int pef2256_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int rx_mask, int slots, int width)
+{
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ switch (width) {
+ case 0:
+ /* Not set -> default 8 */
+ case 8:
+ break;
+ default:
+ dev_err(dai->dev, "tdm slot width %d not supported\n", width);
+ return -EINVAL;
+ }
+
+ pef2256->max_chan_playback = hweight32(tx_mask);
+ if (pef2256->max_chan_playback > PEF2256_NB_CHANNEL) {
+ dev_err(dai->dev, "too much tx slots defined (mask = 0x%x) support max %d\n",
+ tx_mask, PEF2256_NB_CHANNEL);
+ return -EINVAL;
+ }
+
+ pef2256->max_chan_capture = hweight32(rx_mask);
+ if (pef2256->max_chan_capture > PEF2256_NB_CHANNEL) {
+ dev_err(dai->dev, "too much rx slots defined (mask = 0x%x) support max %d\n",
+ rx_mask, PEF2256_NB_CHANNEL);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * The constraints for format/channel is to match with the number of 8bit
+ * time-slots available.
+ */
+static int pef2256_dai_hw_rule_channels_by_format(struct snd_soc_dai *dai,
+ struct snd_pcm_hw_params *params,
+ unsigned int nb_ts)
+{
+ struct snd_interval *c = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
+ snd_pcm_format_t format = params_format(params);
+ struct snd_interval ch = {0};
+
+ switch (snd_pcm_format_physical_width(format)) {
+ case 8:
+ ch.max = nb_ts;
+ break;
+ case 16:
+ ch.max = nb_ts/2;
+ break;
+ case 32:
+ ch.max = nb_ts/4;
+ break;
+ case 64:
+ ch.max = nb_ts/8;
+ break;
+ default:
+ dev_err(dai->dev, "format physical width %u not supported\n",
+ snd_pcm_format_physical_width(format));
+ return -EINVAL;
+ }
+
+ ch.min = ch.max ? 1 : 0;
+
+ return snd_interval_refine(c, &ch);
+}
+
+static int pef2256_dai_hw_rule_playback_channels_by_format(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_soc_dai *dai = rule->private;
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ return pef2256_dai_hw_rule_channels_by_format(dai, params, pef2256->max_chan_playback);
+}
+
+static int pef2256_dai_hw_rule_capture_channels_by_format(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_soc_dai *dai = rule->private;
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ return pef2256_dai_hw_rule_channels_by_format(dai, params, pef2256->max_chan_capture);
+}
+
+static int pef2256_dai_hw_rule_format_by_channels(struct snd_soc_dai *dai,
+ struct snd_pcm_hw_params *params,
+ unsigned int nb_ts)
+{
+ struct snd_mask *f_old = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ unsigned int channels = params_channels(params);
+ unsigned int slot_width;
+ struct snd_mask f_new;
+ unsigned int i;
+
+ if (!channels || channels > nb_ts) {
+ dev_err(dai->dev, "channels %u not supported\n", nb_ts);
+ return -EINVAL;
+ }
+
+ slot_width = (nb_ts / channels) * 8;
+
+ snd_mask_none(&f_new);
+ for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) {
+ if (snd_mask_test(f_old, i)) {
+ if (snd_pcm_format_physical_width(i) <= slot_width)
+ snd_mask_set(&f_new, i);
+ }
+ }
+
+ return snd_mask_refine(f_old, &f_new);
+}
+
+static int pef2256_dai_hw_rule_playback_format_by_channels(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_soc_dai *dai = rule->private;
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ return pef2256_dai_hw_rule_format_by_channels(dai, params, pef2256->max_chan_playback);
+}
+
+static int pef2256_dai_hw_rule_capture_format_by_channels(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_soc_dai *dai = rule->private;
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+
+ return pef2256_dai_hw_rule_format_by_channels(dai, params, pef2256->max_chan_capture);
+}
+
+static u64 pef2256_formats(u8 nb_ts)
+{
+ u64 formats;
+ unsigned int chan_width;
+ unsigned int format_width;
+ int i;
+
+ if (!nb_ts)
+ return 0;
+
+ formats = 0;
+ chan_width = nb_ts * 8;
+ for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) {
+ /* Support physical width multiple of 8bit */
+ format_width = snd_pcm_format_physical_width(i);
+ if (format_width == 0 || format_width % 8)
+ continue;
+
+ /*
+ * And support physical width that can fit N times in the
+ * channel
+ */
+ if (format_width > chan_width || chan_width % format_width)
+ continue;
+
+ formats |= (1ULL << i);
+ }
+ return formats;
+}
+
+static int pef2256_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(dai->component);
+ snd_pcm_hw_rule_func_t hw_rule_channels_by_format;
+ snd_pcm_hw_rule_func_t hw_rule_format_by_channels;
+ unsigned int frame_bits;
+ u64 format;
+ int ret;
+
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ format = pef2256_formats(pef2256->max_chan_capture);
+ hw_rule_channels_by_format = pef2256_dai_hw_rule_capture_channels_by_format;
+ hw_rule_format_by_channels = pef2256_dai_hw_rule_capture_format_by_channels;
+ frame_bits = pef2256->max_chan_capture * 8;
+ } else {
+ format = pef2256_formats(pef2256->max_chan_playback);
+ hw_rule_channels_by_format = pef2256_dai_hw_rule_playback_channels_by_format;
+ hw_rule_format_by_channels = pef2256_dai_hw_rule_playback_format_by_channels;
+ frame_bits = pef2256->max_chan_playback * 8;
+ }
+
+ ret = snd_pcm_hw_constraint_mask64(substream->runtime,
+ SNDRV_PCM_HW_PARAM_FORMAT, format);
+ if (ret) {
+ dev_err(dai->dev, "Failed to add format constraint (%d)\n", ret);
+ return ret;
+ }
+
+ ret = snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+ hw_rule_channels_by_format, dai,
+ SNDRV_PCM_HW_PARAM_FORMAT, -1);
+ if (ret) {
+ dev_err(dai->dev, "Failed to add channels rule (%d)\n", ret);
+ return ret;
+ }
+
+ ret = snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT,
+ hw_rule_format_by_channels, dai,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ if (ret) {
+ dev_err(dai->dev, "Failed to add format rule (%d)\n", ret);
+ return ret;
+ }
+
+ ret = snd_pcm_hw_constraint_single(substream->runtime,
+ SNDRV_PCM_HW_PARAM_FRAME_BITS,
+ frame_bits);
+ if (ret < 0) {
+ dev_err(dai->dev, "Failed to add frame_bits constraint (%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static u64 pef2256_dai_formats[] = {
+ SND_SOC_POSSIBLE_DAIFMT_DSP_B,
+};
+
+static const struct snd_soc_dai_ops pef2256_dai_ops = {
+ .startup = pef2256_dai_startup,
+ .set_tdm_slot = pef2256_dai_set_tdm_slot,
+ .auto_selectable_formats = pef2256_dai_formats,
+ .num_auto_selectable_formats = ARRAY_SIZE(pef2256_dai_formats),
+};
+
+static struct snd_soc_dai_driver pef2256_dai_driver = {
+ .name = "pef2256",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = PEF2256_NB_CHANNEL,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = U64_MAX, /* Will be refined on DAI .startup() */
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = PEF2256_NB_CHANNEL,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = U64_MAX, /* Will be refined on DAI .startup() */
+ },
+ .ops = &pef2256_dai_ops,
+};
+
+static void pef2256_carrier_work(struct work_struct *work)
+{
+ struct pef2256_codec *pef2256 = container_of(work, struct pef2256_codec, carrier_work);
+ int status;
+
+ status = pef2256_get_carrier(pef2256->pef2256) ? PEF2256_JACK_MASK : 0;
+ snd_soc_jack_report(&pef2256->jack, status, PEF2256_JACK_MASK);
+}
+
+static int pef2256_carrier_notifier(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct pef2256_codec *pef2256 = container_of(nb, struct pef2256_codec, nb);
+
+ switch (action) {
+ case PEF2256_EVENT_CARRIER:
+ queue_work(system_power_efficient_wq, &pef2256->carrier_work);
+ break;
+ default:
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_OK;
+}
+
+static int pef2256_component_probe(struct snd_soc_component *component)
+{
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(component);
+ char *name;
+ int ret;
+
+ INIT_WORK(&pef2256->carrier_work, pef2256_carrier_work);
+
+ name = "carrier";
+ if (component->name_prefix) {
+ name = kasprintf(GFP_KERNEL, "%s carrier", component->name_prefix);
+ if (!name)
+ return -ENOMEM;
+ }
+
+ ret = snd_soc_card_jack_new(component->card, name, PEF2256_JACK_MASK, &pef2256->jack);
+ if (component->name_prefix)
+ kfree(name); /* A copy is done by snd_soc_card_jack_new */
+ if (ret) {
+ dev_err(component->dev, "Cannot create jack\n");
+ return ret;
+ }
+
+ pef2256->nb.notifier_call = pef2256_carrier_notifier;
+ ret = pef2256_register_event_notifier(pef2256->pef2256, &pef2256->nb);
+ if (ret) {
+ dev_err(component->dev, "Cannot register event notifier\n");
+ return ret;
+ }
+
+ /* Queue work to set the initial value */
+ queue_work(system_power_efficient_wq, &pef2256->carrier_work);
+
+ return 0;
+}
+
+static void pef2256_component_remove(struct snd_soc_component *component)
+{
+ struct pef2256_codec *pef2256 = snd_soc_component_get_drvdata(component);
+
+ pef2256_unregister_event_notifier(pef2256->pef2256, &pef2256->nb);
+ cancel_work_sync(&pef2256->carrier_work);
+}
+
+static const struct snd_soc_component_driver pef2256_component_driver = {
+ .probe = pef2256_component_probe,
+ .remove = pef2256_component_remove,
+ .endianness = 1,
+};
+
+static int pef2256_codec_probe(struct platform_device *pdev)
+{
+ struct pef2256_codec *pef2256;
+
+ pef2256 = devm_kzalloc(&pdev->dev, sizeof(*pef2256), GFP_KERNEL);
+ if (!pef2256)
+ return -ENOMEM;
+
+ pef2256->dev = &pdev->dev;
+ pef2256->pef2256 = dev_get_drvdata(pef2256->dev->parent);
+
+ platform_set_drvdata(pdev, pef2256);
+
+ return devm_snd_soc_register_component(&pdev->dev, &pef2256_component_driver,
+ &pef2256_dai_driver, 1);
+}
+
+static const struct of_device_id pef2256_codec_of_match[] = {
+ { .compatible = "lantiq,pef2256-codec" },
+ {} /* sentinel */
+};
+MODULE_DEVICE_TABLE(of, pef2256_codec_of_match);
+
+static struct platform_driver pef2256_codec_driver = {
+ .driver = {
+ .name = "lantiq-pef2256-codec",
+ .of_match_table = pef2256_codec_of_match,
+ },
+ .probe = pef2256_codec_probe,
+};
+module_platform_driver(pef2256_codec_driver);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("PEF2256 ALSA SoC driver");
+MODULE_LICENSE("GPL");
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 5/5] MAINTAINERS: Add the Lantiq PEF2256 driver entry
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
` (7 preceding siblings ...)
2023-03-28 7:48 ` Herve Codina
@ 2023-03-28 7:48 ` Herve Codina via Alsa-devel
2023-03-28 7:48 ` Herve Codina
9 siblings, 0 replies; 12+ messages in thread
From: Herve Codina via Alsa-devel @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
[-- Attachment #0: Type: message/rfc822, Size: 4802 bytes --]
From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>, Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Christophe Leroy <christophe.leroy@csgroup.eu>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v4 5/5] MAINTAINERS: Add the Lantiq PEF2256 driver entry
Date: Tue, 28 Mar 2023 09:48:11 +0200
Message-ID: <20230328074811.594361-6-herve.codina@bootlin.com>
After contributing the driver, add myself as the maintainer for the
Lantiq PEF2256 driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
MAINTAINERS | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index fcb69242cd19..a17c85648f6f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11651,6 +11651,15 @@ S: Maintained
F: arch/mips/lantiq
F: drivers/soc/lantiq
+LANTIQ PEF2256 DRIVER
+M: Herve Codina <herve.codina@bootlin.com>
+S: Maintained
+F: Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256
+F: Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
+F: drivers/mfd/pef2256.c
+F: include/linux/mfd/pef2256.h
+F: sound/soc/codecs/pef2256-codec.c
+
LASI 53c700 driver for PARISC
M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 5/5] MAINTAINERS: Add the Lantiq PEF2256 driver entry
2023-03-28 7:48 [PATCH v4 0/5] Add the Lantiq PEF2256 audio support Herve Codina
` (8 preceding siblings ...)
2023-03-28 7:48 ` [PATCH v4 5/5] MAINTAINERS: Add the Lantiq PEF2256 driver entry Herve Codina via Alsa-devel
@ 2023-03-28 7:48 ` Herve Codina
9 siblings, 0 replies; 12+ messages in thread
From: Herve Codina @ 2023-03-28 7:48 UTC (permalink / raw)
To: Herve Codina, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai
Cc: linux-kernel, devicetree, alsa-devel, Christophe Leroy, Thomas Petazzoni
After contributing the driver, add myself as the maintainer for the
Lantiq PEF2256 driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
MAINTAINERS | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index fcb69242cd19..a17c85648f6f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11651,6 +11651,15 @@ S: Maintained
F: arch/mips/lantiq
F: drivers/soc/lantiq
+LANTIQ PEF2256 DRIVER
+M: Herve Codina <herve.codina@bootlin.com>
+S: Maintained
+F: Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256
+F: Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
+F: drivers/mfd/pef2256.c
+F: include/linux/mfd/pef2256.h
+F: sound/soc/codecs/pef2256-codec.c
+
LASI 53c700 driver for PARISC
M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
--
2.39.2
^ permalink raw reply related [flat|nested] 12+ messages in thread