[PATCH 0/6] clk: imx: imx93: fix and update

[PATCH 0/6] clk: imx: imx93: fix and update

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Patch 1,2 is fix the freq table and set rate flow
Patch 3,4,5 is to support integer, A55 clk, mcore_booted parameter

Jacky Bai (1):
  clk: imx: Add 300MHz freq support for imx9 pll

Peng Fan (5):
  clk: imx: fracn-gppll: fix the rate table
  clk: imx: fracn-gppll: disable hardware select control
  clk: imx: imx93: add mcore_booted module paratemter
  clk: imx: fracn-gppll: support integer pll
  clk: imx: imx93: Add nic and A55 clk

 drivers/clk/imx/clk-composite-93.c      |  8 ++-
 drivers/clk/imx/clk-fracn-gppll.c       | 89 +++++++++++++++++++++----
 drivers/clk/imx/clk-imx93.c             | 19 +++++-
 drivers/clk/imx/clk.h                   |  7 ++
 include/dt-bindings/clock/imx93-clock.h |  6 +-
 5 files changed, 111 insertions(+), 18 deletions(-)

-- 
2.37.1

[PATCH 0/6] clk: imx: imx93: fix and update

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Patch 1,2 is fix the freq table and set rate flow
Patch 3,4,5 is to support integer, A55 clk, mcore_booted parameter

Jacky Bai (1):
  clk: imx: Add 300MHz freq support for imx9 pll

Peng Fan (5):
  clk: imx: fracn-gppll: fix the rate table
  clk: imx: fracn-gppll: disable hardware select control
  clk: imx: imx93: add mcore_booted module paratemter
  clk: imx: fracn-gppll: support integer pll
  clk: imx: imx93: Add nic and A55 clk

 drivers/clk/imx/clk-composite-93.c      |  8 ++-
 drivers/clk/imx/clk-fracn-gppll.c       | 89 +++++++++++++++++++++----
 drivers/clk/imx/clk-imx93.c             | 19 +++++-
 drivers/clk/imx/clk.h                   |  7 ++
 include/dt-bindings/clock/imx93-clock.h |  6 +-
 5 files changed, 111 insertions(+), 18 deletions(-)

-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/6] clk: imx: fracn-gppll: fix the rate table

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

The Fvco should be range 2.4GHz to 5GHz, the original table voilate the
spec, so update the table to fix it.

Fixes: c196175acdd3 ("clk: imx: clk-fracn-gppll: Add more freq config for video pll")
Fixes: 044034efbeea ("clk: imx: clk-fracn-gppll: fix mfd value")
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index a2aaa14fc1ae..ec50c41e2a4c 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -60,18 +60,20 @@ struct clk_fracn_gppll {
 };
 
 /*
- * Fvco = Fref * (MFI + MFN / MFD)
- * Fout = Fvco / (rdiv * odiv)
+ * Fvco = (Fref / rdiv) * (MFI + MFN / MFD)
+ * Fout = Fvco / odiv
+ * The (Fref / rdiv) should be in range 20MHz to 40MHz
+ * The Fvco should be in range 2.5Ghz to 5Ghz
  */
 static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
-	PLL_FRACN_GP(650000000U, 81, 0, 1, 0, 3),
+	PLL_FRACN_GP(650000000U, 162, 50, 100, 0, 6),
 	PLL_FRACN_GP(594000000U, 198, 0, 1, 0, 8),
-	PLL_FRACN_GP(560000000U, 70, 0, 1, 0, 3),
-	PLL_FRACN_GP(498000000U, 83, 0, 1, 0, 4),
+	PLL_FRACN_GP(560000000U, 140, 0, 1, 0, 6),
+	PLL_FRACN_GP(498000000U, 166, 0, 1, 0, 8),
 	PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6),
 	PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
-	PLL_FRACN_GP(400000000U, 50, 0, 1, 0, 3),
-	PLL_FRACN_GP(393216000U, 81, 92, 100, 0, 5)
+	PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
+	PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10)
 };
 
 struct imx_fracn_gppll_clk imx_fracn_gppll = {
-- 
2.37.1

[PATCH 1/6] clk: imx: fracn-gppll: fix the rate table

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

The Fvco should be range 2.4GHz to 5GHz, the original table voilate the
spec, so update the table to fix it.

Fixes: c196175acdd3 ("clk: imx: clk-fracn-gppll: Add more freq config for video pll")
Fixes: 044034efbeea ("clk: imx: clk-fracn-gppll: fix mfd value")
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index a2aaa14fc1ae..ec50c41e2a4c 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -60,18 +60,20 @@ struct clk_fracn_gppll {
 };
 
 /*
- * Fvco = Fref * (MFI + MFN / MFD)
- * Fout = Fvco / (rdiv * odiv)
+ * Fvco = (Fref / rdiv) * (MFI + MFN / MFD)
+ * Fout = Fvco / odiv
+ * The (Fref / rdiv) should be in range 20MHz to 40MHz
+ * The Fvco should be in range 2.5Ghz to 5Ghz
  */
 static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
-	PLL_FRACN_GP(650000000U, 81, 0, 1, 0, 3),
+	PLL_FRACN_GP(650000000U, 162, 50, 100, 0, 6),
 	PLL_FRACN_GP(594000000U, 198, 0, 1, 0, 8),
-	PLL_FRACN_GP(560000000U, 70, 0, 1, 0, 3),
-	PLL_FRACN_GP(498000000U, 83, 0, 1, 0, 4),
+	PLL_FRACN_GP(560000000U, 140, 0, 1, 0, 6),
+	PLL_FRACN_GP(498000000U, 166, 0, 1, 0, 8),
 	PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6),
 	PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
-	PLL_FRACN_GP(400000000U, 50, 0, 1, 0, 3),
-	PLL_FRACN_GP(393216000U, 81, 92, 100, 0, 5)
+	PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
+	PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10)
 };
 
 struct imx_fracn_gppll_clk imx_fracn_gppll = {
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/6] clk: imx: fracn-gppll: disable hardware select control

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

When programming PLL, should disable Hardware control select to make PLL
controlled by register, not hardware inputs through OSCPLL.

Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index ec50c41e2a4c..f6674110a88e 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -15,6 +15,7 @@
 #include "clk.h"
 
 #define PLL_CTRL		0x0
+#define HW_CTRL_SEL		BIT(16)
 #define CLKMUX_BYPASS		BIT(2)
 #define CLKMUX_EN		BIT(1)
 #define POWERUP_MASK		BIT(0)
@@ -193,6 +194,11 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
 
 	rate = imx_get_pll_settings(pll, drate);
 
+	/* Hardware control select disable. PLL is control by register */
+	tmp = readl_relaxed(pll->base + PLL_CTRL);
+	tmp &= ~HW_CTRL_SEL;
+	writel_relaxed(tmp, pll->base + PLL_CTRL);
+
 	/* Disable output */
 	tmp = readl_relaxed(pll->base + PLL_CTRL);
 	tmp &= ~CLKMUX_EN;
-- 
2.37.1

[PATCH 2/6] clk: imx: fracn-gppll: disable hardware select control

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

When programming PLL, should disable Hardware control select to make PLL
controlled by register, not hardware inputs through OSCPLL.

Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index ec50c41e2a4c..f6674110a88e 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -15,6 +15,7 @@
 #include "clk.h"
 
 #define PLL_CTRL		0x0
+#define HW_CTRL_SEL		BIT(16)
 #define CLKMUX_BYPASS		BIT(2)
 #define CLKMUX_EN		BIT(1)
 #define POWERUP_MASK		BIT(0)
@@ -193,6 +194,11 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
 
 	rate = imx_get_pll_settings(pll, drate);
 
+	/* Hardware control select disable. PLL is control by register */
+	tmp = readl_relaxed(pll->base + PLL_CTRL);
+	tmp &= ~HW_CTRL_SEL;
+	writel_relaxed(tmp, pll->base + PLL_CTRL);
+
 	/* Disable output */
 	tmp = readl_relaxed(pll->base + PLL_CTRL);
 	tmp &= ~CLKMUX_EN;
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/6] clk: imx: imx93: add mcore_booted module paratemter

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Add mcore_booted boot parameter which could simplify AMP clock
management. To i.MX93, there is CCM(clock control Module) to generate
clock root clock, anatop(analog PLL module) to generate PLL, and LPCG
(clock gating) to gate clocks to peripherals. As below:
anatop->ccm->lpcg->peripheral

Linux handles the clock management and the auxiliary core is under
control of Linux. Although there is per hardware domain control for LPCG
and CCM, auxiliary core normally only use LPCG hardware domain control
to avoid linux gate off the clk to peripherals and leave CCM ana anatop
to Linux.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-composite-93.c | 8 +++++++-
 drivers/clk/imx/clk-imx93.c        | 2 ++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-composite-93.c b/drivers/clk/imx/clk-composite-93.c
index 74a66b0203e4..81164bdcd6cc 100644
--- a/drivers/clk/imx/clk-composite-93.c
+++ b/drivers/clk/imx/clk-composite-93.c
@@ -222,7 +222,7 @@ struct clk_hw *imx93_clk_composite_flags(const char *name, const char * const *p
 		hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
 					       mux_hw, &clk_mux_ro_ops, div_hw,
 					       &clk_divider_ro_ops, NULL, NULL, flags);
-	} else {
+	} else if (!mcore_booted) {
 		gate = kzalloc(sizeof(*gate), GFP_KERNEL);
 		if (!gate)
 			goto fail;
@@ -238,6 +238,12 @@ struct clk_hw *imx93_clk_composite_flags(const char *name, const char * const *p
 					       &imx93_clk_composite_divider_ops, gate_hw,
 					       &imx93_clk_composite_gate_ops,
 					       flags | CLK_SET_RATE_NO_REPARENT);
+	} else {
+		hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
+					       mux_hw, &imx93_clk_composite_mux_ops, div_hw,
+					       &imx93_clk_composite_divider_ops, NULL,
+					       &imx93_clk_composite_gate_ops,
+					       flags | CLK_SET_RATE_NO_REPARENT);
 	}
 
 	if (IS_ERR(hw))
diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c
index 8d0974db6bfd..bf2908be26a1 100644
--- a/drivers/clk/imx/clk-imx93.c
+++ b/drivers/clk/imx/clk-imx93.c
@@ -352,6 +352,8 @@ static struct platform_driver imx93_clk_driver = {
 	},
 };
 module_platform_driver(imx93_clk_driver);
+module_param(mcore_booted, bool, 0444);
+MODULE_PARM_DESC(mcore_booted, "See Cortex-M core is booted or not");
 
 MODULE_DESCRIPTION("NXP i.MX93 clock driver");
 MODULE_LICENSE("GPL v2");
-- 
2.37.1

[PATCH 3/6] clk: imx: imx93: add mcore_booted module paratemter

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Add mcore_booted boot parameter which could simplify AMP clock
management. To i.MX93, there is CCM(clock control Module) to generate
clock root clock, anatop(analog PLL module) to generate PLL, and LPCG
(clock gating) to gate clocks to peripherals. As below:
anatop->ccm->lpcg->peripheral

Linux handles the clock management and the auxiliary core is under
control of Linux. Although there is per hardware domain control for LPCG
and CCM, auxiliary core normally only use LPCG hardware domain control
to avoid linux gate off the clk to peripherals and leave CCM ana anatop
to Linux.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-composite-93.c | 8 +++++++-
 drivers/clk/imx/clk-imx93.c        | 2 ++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-composite-93.c b/drivers/clk/imx/clk-composite-93.c
index 74a66b0203e4..81164bdcd6cc 100644
--- a/drivers/clk/imx/clk-composite-93.c
+++ b/drivers/clk/imx/clk-composite-93.c
@@ -222,7 +222,7 @@ struct clk_hw *imx93_clk_composite_flags(const char *name, const char * const *p
 		hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
 					       mux_hw, &clk_mux_ro_ops, div_hw,
 					       &clk_divider_ro_ops, NULL, NULL, flags);
-	} else {
+	} else if (!mcore_booted) {
 		gate = kzalloc(sizeof(*gate), GFP_KERNEL);
 		if (!gate)
 			goto fail;
@@ -238,6 +238,12 @@ struct clk_hw *imx93_clk_composite_flags(const char *name, const char * const *p
 					       &imx93_clk_composite_divider_ops, gate_hw,
 					       &imx93_clk_composite_gate_ops,
 					       flags | CLK_SET_RATE_NO_REPARENT);
+	} else {
+		hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
+					       mux_hw, &imx93_clk_composite_mux_ops, div_hw,
+					       &imx93_clk_composite_divider_ops, NULL,
+					       &imx93_clk_composite_gate_ops,
+					       flags | CLK_SET_RATE_NO_REPARENT);
 	}
 
 	if (IS_ERR(hw))
diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c
index 8d0974db6bfd..bf2908be26a1 100644
--- a/drivers/clk/imx/clk-imx93.c
+++ b/drivers/clk/imx/clk-imx93.c
@@ -352,6 +352,8 @@ static struct platform_driver imx93_clk_driver = {
 	},
 };
 module_platform_driver(imx93_clk_driver);
+module_param(mcore_booted, bool, 0444);
+MODULE_PARM_DESC(mcore_booted, "See Cortex-M core is booted or not");
 
 MODULE_DESCRIPTION("NXP i.MX93 clock driver");
 MODULE_LICENSE("GPL v2");
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/6] clk: imx: fracn-gppll: support integer pll

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

The fracn gppll could be configured in FRAC or INTEGER mode during
hardware design. The current driver only support FRAC mode, while
this patch introduces INTEGER support. When the PLL is INTEGER pll,
there is no mfn, mfd, the calculation is as below:
 Fvco_clk = (Fref / DIV[RDIV] ) * DIV[MFI]
 Fclko_odiv = Fvco_clk / DIV[ODIV]

In this patch, we reuse the FRAC pll logic with some condition check to
simplify the driver

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 66 +++++++++++++++++++++++++++----
 drivers/clk/imx/clk.h             |  7 ++++
 2 files changed, 66 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index f6674110a88e..2c4e64db828f 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -53,11 +53,22 @@
 		.odiv	=	(_odiv),			\
 	}
 
+#define PLL_FRACN_GP_INTEGER(_rate, _mfi, _rdiv, _odiv)		\
+	{							\
+		.rate	=	(_rate),			\
+		.mfi	=	(_mfi),				\
+		.mfn	=	0,				\
+		.mfd	=	0,				\
+		.rdiv	=	(_rdiv),			\
+		.odiv	=	(_odiv),			\
+	}
+
 struct clk_fracn_gppll {
 	struct clk_hw			hw;
 	void __iomem			*base;
 	const struct imx_fracn_gppll_rate_table *rate_table;
 	int rate_count;
+	u32 flags;
 };
 
 /*
@@ -83,6 +94,24 @@ struct imx_fracn_gppll_clk imx_fracn_gppll = {
 };
 EXPORT_SYMBOL_GPL(imx_fracn_gppll);
 
+/*
+ * Fvco = (Fref / rdiv) * MFI
+ * Fout = Fvco / odiv
+ * The (Fref / rdiv) should be in range 20MHz to 40MHz
+ * The Fvco should be in range 2.5Ghz to 5Ghz
+ */
+static const struct imx_fracn_gppll_rate_table int_tbl[] = {
+	PLL_FRACN_GP_INTEGER(1700000000U, 141, 1, 2),
+	PLL_FRACN_GP_INTEGER(1400000000U, 175, 1, 3),
+	PLL_FRACN_GP_INTEGER(900000000U, 150, 1, 4),
+};
+
+struct imx_fracn_gppll_clk imx_fracn_gppll_integer = {
+	.rate_table = int_tbl,
+	.rate_count = ARRAY_SIZE(int_tbl),
+};
+EXPORT_SYMBOL_GPL(imx_fracn_gppll_integer);
+
 static inline struct clk_fracn_gppll *to_clk_fracn_gppll(struct clk_hw *hw)
 {
 	return container_of(hw, struct clk_fracn_gppll, hw);
@@ -169,9 +198,15 @@ static unsigned long clk_fracn_gppll_recalc_rate(struct clk_hw *hw, unsigned lon
 		break;
 	}
 
-	/* Fvco = Fref * (MFI + MFN / MFD) */
-	fvco = fvco * mfi * mfd + fvco * mfn;
-	do_div(fvco, mfd * rdiv * odiv);
+	if (pll->flags & CLK_FRACN_GPPLL_INTEGER) {
+		/* Fvco = (Fref / rdiv) * MFI */
+		fvco = fvco * mfi;
+		do_div(fvco, rdiv * odiv);
+	} else {
+		/* Fvco = (Fref / rdiv) * (MFI + MFN / MFD) */
+		fvco = fvco * mfi * mfd + fvco * mfn;
+		do_div(fvco, mfd * rdiv * odiv);
+	}
 
 	return (unsigned long)fvco;
 }
@@ -215,8 +250,10 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
 	pll_div = FIELD_PREP(PLL_RDIV_MASK, rate->rdiv) | rate->odiv |
 		FIELD_PREP(PLL_MFI_MASK, rate->mfi);
 	writel_relaxed(pll_div, pll->base + PLL_DIV);
-	writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR);
-	writel_relaxed(FIELD_PREP(PLL_MFN_MASK, rate->mfn), pll->base + PLL_NUMERATOR);
+	if (pll->flags & CLK_FRACN_GPPLL_FRACN) {
+		writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR);
+		writel_relaxed(FIELD_PREP(PLL_MFN_MASK, rate->mfn), pll->base + PLL_NUMERATOR);
+	}
 
 	/* Wait for 5us according to fracn mode pll doc */
 	udelay(5);
@@ -300,8 +337,8 @@ static const struct clk_ops clk_fracn_gppll_ops = {
 	.set_rate	= clk_fracn_gppll_set_rate,
 };
 
-struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
-				   const struct imx_fracn_gppll_clk *pll_clk)
+struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
+				    const struct imx_fracn_gppll_clk *pll_clk, u32 pll_flags)
 {
 	struct clk_fracn_gppll *pll;
 	struct clk_hw *hw;
@@ -322,6 +359,7 @@ struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, vo
 	pll->hw.init = &init;
 	pll->rate_table = pll_clk->rate_table;
 	pll->rate_count = pll_clk->rate_count;
+	pll->flags = pll_flags;
 
 	hw = &pll->hw;
 
@@ -334,4 +372,18 @@ struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, vo
 
 	return hw;
 }
+
+struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
+				   const struct imx_fracn_gppll_clk *pll_clk)
+{
+	return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_FRACN);
+}
 EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll);
+
+struct clk_hw *imx_clk_fracn_gppll_integer(const char *name, const char *parent_name,
+					   void __iomem *base,
+					   const struct imx_fracn_gppll_clk *pll_clk)
+{
+	return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_INTEGER);
+}
+EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll_integer);
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 3d94722bbf99..bb105d6e5b39 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -73,6 +73,9 @@ extern struct imx_pll14xx_clk imx_1416x_pll;
 extern struct imx_pll14xx_clk imx_1443x_pll;
 extern struct imx_pll14xx_clk imx_1443x_dram_pll;
 
+#define CLK_FRACN_GPPLL_INTEGER	BIT(0)
+#define CLK_FRACN_GPPLL_FRACN	BIT(1)
+
 /* NOTE: Rate table should be kept sorted in descending order. */
 struct imx_fracn_gppll_rate_table {
 	unsigned int rate;
@@ -91,8 +94,12 @@ struct imx_fracn_gppll_clk {
 
 struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
 				   const struct imx_fracn_gppll_clk *pll_clk);
+struct clk_hw *imx_clk_fracn_gppll_integer(const char *name, const char *parent_name,
+					   void __iomem *base,
+					   const struct imx_fracn_gppll_clk *pll_clk);
 
 extern struct imx_fracn_gppll_clk imx_fracn_gppll;
+extern struct imx_fracn_gppll_clk imx_fracn_gppll_integer;
 
 #define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
 	to_clk(imx_clk_hw_cpu(name, parent_name, div, mux, pll, step))
-- 
2.37.1

[PATCH 4/6] clk: imx: fracn-gppll: support integer pll

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

The fracn gppll could be configured in FRAC or INTEGER mode during
hardware design. The current driver only support FRAC mode, while
this patch introduces INTEGER support. When the PLL is INTEGER pll,
there is no mfn, mfd, the calculation is as below:
 Fvco_clk = (Fref / DIV[RDIV] ) * DIV[MFI]
 Fclko_odiv = Fvco_clk / DIV[ODIV]

In this patch, we reuse the FRAC pll logic with some condition check to
simplify the driver

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 66 +++++++++++++++++++++++++++----
 drivers/clk/imx/clk.h             |  7 ++++
 2 files changed, 66 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index f6674110a88e..2c4e64db828f 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -53,11 +53,22 @@
 		.odiv	=	(_odiv),			\
 	}
 
+#define PLL_FRACN_GP_INTEGER(_rate, _mfi, _rdiv, _odiv)		\
+	{							\
+		.rate	=	(_rate),			\
+		.mfi	=	(_mfi),				\
+		.mfn	=	0,				\
+		.mfd	=	0,				\
+		.rdiv	=	(_rdiv),			\
+		.odiv	=	(_odiv),			\
+	}
+
 struct clk_fracn_gppll {
 	struct clk_hw			hw;
 	void __iomem			*base;
 	const struct imx_fracn_gppll_rate_table *rate_table;
 	int rate_count;
+	u32 flags;
 };
 
 /*
@@ -83,6 +94,24 @@ struct imx_fracn_gppll_clk imx_fracn_gppll = {
 };
 EXPORT_SYMBOL_GPL(imx_fracn_gppll);
 
+/*
+ * Fvco = (Fref / rdiv) * MFI
+ * Fout = Fvco / odiv
+ * The (Fref / rdiv) should be in range 20MHz to 40MHz
+ * The Fvco should be in range 2.5Ghz to 5Ghz
+ */
+static const struct imx_fracn_gppll_rate_table int_tbl[] = {
+	PLL_FRACN_GP_INTEGER(1700000000U, 141, 1, 2),
+	PLL_FRACN_GP_INTEGER(1400000000U, 175, 1, 3),
+	PLL_FRACN_GP_INTEGER(900000000U, 150, 1, 4),
+};
+
+struct imx_fracn_gppll_clk imx_fracn_gppll_integer = {
+	.rate_table = int_tbl,
+	.rate_count = ARRAY_SIZE(int_tbl),
+};
+EXPORT_SYMBOL_GPL(imx_fracn_gppll_integer);
+
 static inline struct clk_fracn_gppll *to_clk_fracn_gppll(struct clk_hw *hw)
 {
 	return container_of(hw, struct clk_fracn_gppll, hw);
@@ -169,9 +198,15 @@ static unsigned long clk_fracn_gppll_recalc_rate(struct clk_hw *hw, unsigned lon
 		break;
 	}
 
-	/* Fvco = Fref * (MFI + MFN / MFD) */
-	fvco = fvco * mfi * mfd + fvco * mfn;
-	do_div(fvco, mfd * rdiv * odiv);
+	if (pll->flags & CLK_FRACN_GPPLL_INTEGER) {
+		/* Fvco = (Fref / rdiv) * MFI */
+		fvco = fvco * mfi;
+		do_div(fvco, rdiv * odiv);
+	} else {
+		/* Fvco = (Fref / rdiv) * (MFI + MFN / MFD) */
+		fvco = fvco * mfi * mfd + fvco * mfn;
+		do_div(fvco, mfd * rdiv * odiv);
+	}
 
 	return (unsigned long)fvco;
 }
@@ -215,8 +250,10 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
 	pll_div = FIELD_PREP(PLL_RDIV_MASK, rate->rdiv) | rate->odiv |
 		FIELD_PREP(PLL_MFI_MASK, rate->mfi);
 	writel_relaxed(pll_div, pll->base + PLL_DIV);
-	writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR);
-	writel_relaxed(FIELD_PREP(PLL_MFN_MASK, rate->mfn), pll->base + PLL_NUMERATOR);
+	if (pll->flags & CLK_FRACN_GPPLL_FRACN) {
+		writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR);
+		writel_relaxed(FIELD_PREP(PLL_MFN_MASK, rate->mfn), pll->base + PLL_NUMERATOR);
+	}
 
 	/* Wait for 5us according to fracn mode pll doc */
 	udelay(5);
@@ -300,8 +337,8 @@ static const struct clk_ops clk_fracn_gppll_ops = {
 	.set_rate	= clk_fracn_gppll_set_rate,
 };
 
-struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
-				   const struct imx_fracn_gppll_clk *pll_clk)
+struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
+				    const struct imx_fracn_gppll_clk *pll_clk, u32 pll_flags)
 {
 	struct clk_fracn_gppll *pll;
 	struct clk_hw *hw;
@@ -322,6 +359,7 @@ struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, vo
 	pll->hw.init = &init;
 	pll->rate_table = pll_clk->rate_table;
 	pll->rate_count = pll_clk->rate_count;
+	pll->flags = pll_flags;
 
 	hw = &pll->hw;
 
@@ -334,4 +372,18 @@ struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, vo
 
 	return hw;
 }
+
+struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
+				   const struct imx_fracn_gppll_clk *pll_clk)
+{
+	return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_FRACN);
+}
 EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll);
+
+struct clk_hw *imx_clk_fracn_gppll_integer(const char *name, const char *parent_name,
+					   void __iomem *base,
+					   const struct imx_fracn_gppll_clk *pll_clk)
+{
+	return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_INTEGER);
+}
+EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll_integer);
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 3d94722bbf99..bb105d6e5b39 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -73,6 +73,9 @@ extern struct imx_pll14xx_clk imx_1416x_pll;
 extern struct imx_pll14xx_clk imx_1443x_pll;
 extern struct imx_pll14xx_clk imx_1443x_dram_pll;
 
+#define CLK_FRACN_GPPLL_INTEGER	BIT(0)
+#define CLK_FRACN_GPPLL_FRACN	BIT(1)
+
 /* NOTE: Rate table should be kept sorted in descending order. */
 struct imx_fracn_gppll_rate_table {
 	unsigned int rate;
@@ -91,8 +94,12 @@ struct imx_fracn_gppll_clk {
 
 struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
 				   const struct imx_fracn_gppll_clk *pll_clk);
+struct clk_hw *imx_clk_fracn_gppll_integer(const char *name, const char *parent_name,
+					   void __iomem *base,
+					   const struct imx_fracn_gppll_clk *pll_clk);
 
 extern struct imx_fracn_gppll_clk imx_fracn_gppll;
+extern struct imx_fracn_gppll_clk imx_fracn_gppll_integer;
 
 #define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
 	to_clk(imx_clk_hw_cpu(name, parent_name, div, mux, pll, step))
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/6] clk: imx: imx93: Add nic and A55 clk

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

The A55 clock logic as below:
     A55_PLL ----------------->\
                                A55_SEL-->A55_CORE
     A55_CCM_ROOT--->A55_GATE->/

Add A55 CPU clk to support freq change.
Add NIC CLK to reflect the clk status

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-imx93.c             | 17 +++++++++++++++--
 include/dt-bindings/clock/imx93-clock.h |  6 +++++-
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c
index bf2908be26a1..4cfe1f367d83 100644
--- a/drivers/clk/imx/clk-imx93.c
+++ b/drivers/clk/imx/clk-imx93.c
@@ -33,6 +33,7 @@ static u32 share_count_sai2;
 static u32 share_count_sai3;
 static u32 share_count_mub;
 
+static const char *a55_core_sels[] = {"a55_alt", "arm_pll"};
 static const char *parent_names[MAX_SEL][4] = {
 	{"osc_24m", "sys_pll_pfd0_div2", "sys_pll_pfd1_div2", "video_pll"},
 	{"osc_24m", "sys_pll_pfd0_div2", "sys_pll_pfd1_div2", "sys_pll_pfd2_div2"},
@@ -55,7 +56,7 @@ static const struct imx93_clk_root {
 	/* a55/m33/bus critical clk for system run */
 	{ IMX93_CLK_A55_PERIPH,		"a55_periph_root",	0x0000,	FAST_SEL, CLK_IS_CRITICAL },
 	{ IMX93_CLK_A55_MTR_BUS,	"a55_mtr_bus_root",	0x0080,	LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
-	{ IMX93_CLK_A55,		"a55_root",		0x0100,	FAST_SEL, CLK_IS_CRITICAL },
+	{ IMX93_CLK_A55,		"a55_alt_root",		0x0100,	FAST_SEL, CLK_IS_CRITICAL },
 	{ IMX93_CLK_M33,		"m33_root",		0x0180,	LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
 	{ IMX93_CLK_BUS_WAKEUP,		"bus_wakeup_root",	0x0280,	LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
 	{ IMX93_CLK_BUS_AON,		"bus_aon_root",		0x0300,	LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
@@ -117,6 +118,7 @@ static const struct imx93_clk_root {
 	{ IMX93_CLK_HSIO_USB_TEST_60M,	"hsio_usb_test_60m_root", 0x1f00, LOW_SPEED_IO_SEL, },
 	{ IMX93_CLK_HSIO_ACSCAN_80M,	"hsio_acscan_80m_root",	0x1f80,	LOW_SPEED_IO_SEL, },
 	{ IMX93_CLK_HSIO_ACSCAN_480M,	"hsio_acscan_480m_root", 0x2000, MISC_SEL, },
+	{ IMX93_CLK_NIC_AXI,		"nic_axi_root",		0x2080, FAST_SEL, CLK_IS_CRITICAL, },
 	{ IMX93_CLK_ML_APB,		"ml_apb_root",		0x2180,	LOW_SPEED_IO_SEL, },
 	{ IMX93_CLK_ML,			"ml_root",		0x2200,	FAST_SEL, },
 	{ IMX93_CLK_MEDIA_AXI,		"media_axi_root",	0x2280,	FAST_SEL, },
@@ -153,7 +155,7 @@ static const struct imx93_clk_ccgr {
 	unsigned long flags;
 	u32 *shared_count;
 } ccgr_array[] = {
-	{ IMX93_CLK_A55_GATE,		"a55",		"a55_root",		0x8000, },
+	{ IMX93_CLK_A55_GATE,		"a55_alt",	"a55_alt_root",		0x8000, },
 	/* M33 critical clk for system run */
 	{ IMX93_CLK_CM33_GATE,		"cm33",		"m33_root",		0x8040, CLK_IS_CRITICAL },
 	{ IMX93_CLK_ADC1_GATE,		"adc1",		"adc_root",		0x82c0, },
@@ -291,6 +293,9 @@ static int imx93_clocks_probe(struct platform_device *pdev)
 	if (WARN_ON(!anatop_base))
 		return -ENOMEM;
 
+	clks[IMX93_CLK_ARM_PLL] = imx_clk_fracn_gppll_integer("arm_pll", "osc_24m",
+							      anatop_base + 0x1000,
+							      &imx_fracn_gppll_integer);
 	clks[IMX93_CLK_AUDIO_PLL] = imx_clk_fracn_gppll("audio_pll", "osc_24m", anatop_base + 0x1200,
 							&imx_fracn_gppll);
 	clks[IMX93_CLK_VIDEO_PLL] = imx_clk_fracn_gppll("video_pll", "osc_24m", anatop_base + 0x1400,
@@ -318,6 +323,14 @@ static int imx93_clocks_probe(struct platform_device *pdev)
 						 ccgr->shared_count);
 	}
 
+	clks[IMX93_CLK_A55_SEL] = imx_clk_hw_mux2("a55_sel", base + 0x4820, 0, 1, a55_core_sels,
+						  ARRAY_SIZE(a55_core_sels));
+	clks[IMX93_CLK_A55_CORE] = imx_clk_hw_cpu("a55_core", "a55_sel",
+						  clks[IMX93_CLK_A55_SEL]->clk,
+						  clks[IMX93_CLK_A55_SEL]->clk,
+						  clks[IMX93_CLK_ARM_PLL]->clk,
+						  clks[IMX93_CLK_A55_GATE]->clk);
+
 	imx_check_clk_hws(clks, IMX93_CLK_END);
 
 	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
diff --git a/include/dt-bindings/clock/imx93-clock.h b/include/dt-bindings/clock/imx93-clock.h
index 8e02859d8ce2..35a1f62053a5 100644
--- a/include/dt-bindings/clock/imx93-clock.h
+++ b/include/dt-bindings/clock/imx93-clock.h
@@ -199,6 +199,10 @@
 #define IMX93_CLK_MU1_B_GATE		194
 #define IMX93_CLK_MU2_A_GATE		195
 #define IMX93_CLK_MU2_B_GATE		196
-#define IMX93_CLK_END			197
+#define IMX93_CLK_NIC_AXI		197
+#define IMX93_CLK_ARM_PLL		198
+#define IMX93_CLK_A55_SEL		199
+#define IMX93_CLK_A55_CORE		200
+#define IMX93_CLK_END			201
 
 #endif
-- 
2.37.1

[PATCH 5/6] clk: imx: imx93: Add nic and A55 clk

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

The A55 clock logic as below:
     A55_PLL ----------------->\
                                A55_SEL-->A55_CORE
     A55_CCM_ROOT--->A55_GATE->/

Add A55 CPU clk to support freq change.
Add NIC CLK to reflect the clk status

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-imx93.c             | 17 +++++++++++++++--
 include/dt-bindings/clock/imx93-clock.h |  6 +++++-
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c
index bf2908be26a1..4cfe1f367d83 100644
--- a/drivers/clk/imx/clk-imx93.c
+++ b/drivers/clk/imx/clk-imx93.c
@@ -33,6 +33,7 @@ static u32 share_count_sai2;
 static u32 share_count_sai3;
 static u32 share_count_mub;
 
+static const char *a55_core_sels[] = {"a55_alt", "arm_pll"};
 static const char *parent_names[MAX_SEL][4] = {
 	{"osc_24m", "sys_pll_pfd0_div2", "sys_pll_pfd1_div2", "video_pll"},
 	{"osc_24m", "sys_pll_pfd0_div2", "sys_pll_pfd1_div2", "sys_pll_pfd2_div2"},
@@ -55,7 +56,7 @@ static const struct imx93_clk_root {
 	/* a55/m33/bus critical clk for system run */
 	{ IMX93_CLK_A55_PERIPH,		"a55_periph_root",	0x0000,	FAST_SEL, CLK_IS_CRITICAL },
 	{ IMX93_CLK_A55_MTR_BUS,	"a55_mtr_bus_root",	0x0080,	LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
-	{ IMX93_CLK_A55,		"a55_root",		0x0100,	FAST_SEL, CLK_IS_CRITICAL },
+	{ IMX93_CLK_A55,		"a55_alt_root",		0x0100,	FAST_SEL, CLK_IS_CRITICAL },
 	{ IMX93_CLK_M33,		"m33_root",		0x0180,	LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
 	{ IMX93_CLK_BUS_WAKEUP,		"bus_wakeup_root",	0x0280,	LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
 	{ IMX93_CLK_BUS_AON,		"bus_aon_root",		0x0300,	LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
@@ -117,6 +118,7 @@ static const struct imx93_clk_root {
 	{ IMX93_CLK_HSIO_USB_TEST_60M,	"hsio_usb_test_60m_root", 0x1f00, LOW_SPEED_IO_SEL, },
 	{ IMX93_CLK_HSIO_ACSCAN_80M,	"hsio_acscan_80m_root",	0x1f80,	LOW_SPEED_IO_SEL, },
 	{ IMX93_CLK_HSIO_ACSCAN_480M,	"hsio_acscan_480m_root", 0x2000, MISC_SEL, },
+	{ IMX93_CLK_NIC_AXI,		"nic_axi_root",		0x2080, FAST_SEL, CLK_IS_CRITICAL, },
 	{ IMX93_CLK_ML_APB,		"ml_apb_root",		0x2180,	LOW_SPEED_IO_SEL, },
 	{ IMX93_CLK_ML,			"ml_root",		0x2200,	FAST_SEL, },
 	{ IMX93_CLK_MEDIA_AXI,		"media_axi_root",	0x2280,	FAST_SEL, },
@@ -153,7 +155,7 @@ static const struct imx93_clk_ccgr {
 	unsigned long flags;
 	u32 *shared_count;
 } ccgr_array[] = {
-	{ IMX93_CLK_A55_GATE,		"a55",		"a55_root",		0x8000, },
+	{ IMX93_CLK_A55_GATE,		"a55_alt",	"a55_alt_root",		0x8000, },
 	/* M33 critical clk for system run */
 	{ IMX93_CLK_CM33_GATE,		"cm33",		"m33_root",		0x8040, CLK_IS_CRITICAL },
 	{ IMX93_CLK_ADC1_GATE,		"adc1",		"adc_root",		0x82c0, },
@@ -291,6 +293,9 @@ static int imx93_clocks_probe(struct platform_device *pdev)
 	if (WARN_ON(!anatop_base))
 		return -ENOMEM;
 
+	clks[IMX93_CLK_ARM_PLL] = imx_clk_fracn_gppll_integer("arm_pll", "osc_24m",
+							      anatop_base + 0x1000,
+							      &imx_fracn_gppll_integer);
 	clks[IMX93_CLK_AUDIO_PLL] = imx_clk_fracn_gppll("audio_pll", "osc_24m", anatop_base + 0x1200,
 							&imx_fracn_gppll);
 	clks[IMX93_CLK_VIDEO_PLL] = imx_clk_fracn_gppll("video_pll", "osc_24m", anatop_base + 0x1400,
@@ -318,6 +323,14 @@ static int imx93_clocks_probe(struct platform_device *pdev)
 						 ccgr->shared_count);
 	}
 
+	clks[IMX93_CLK_A55_SEL] = imx_clk_hw_mux2("a55_sel", base + 0x4820, 0, 1, a55_core_sels,
+						  ARRAY_SIZE(a55_core_sels));
+	clks[IMX93_CLK_A55_CORE] = imx_clk_hw_cpu("a55_core", "a55_sel",
+						  clks[IMX93_CLK_A55_SEL]->clk,
+						  clks[IMX93_CLK_A55_SEL]->clk,
+						  clks[IMX93_CLK_ARM_PLL]->clk,
+						  clks[IMX93_CLK_A55_GATE]->clk);
+
 	imx_check_clk_hws(clks, IMX93_CLK_END);
 
 	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
diff --git a/include/dt-bindings/clock/imx93-clock.h b/include/dt-bindings/clock/imx93-clock.h
index 8e02859d8ce2..35a1f62053a5 100644
--- a/include/dt-bindings/clock/imx93-clock.h
+++ b/include/dt-bindings/clock/imx93-clock.h
@@ -199,6 +199,10 @@
 #define IMX93_CLK_MU1_B_GATE		194
 #define IMX93_CLK_MU2_A_GATE		195
 #define IMX93_CLK_MU2_B_GATE		196
-#define IMX93_CLK_END			197
+#define IMX93_CLK_NIC_AXI		197
+#define IMX93_CLK_ARM_PLL		198
+#define IMX93_CLK_A55_SEL		199
+#define IMX93_CLK_A55_CORE		200
+#define IMX93_CLK_END			201
 
 #endif
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/6] clk: imx: Add 300MHz freq support for imx9 pll

[Peng Fan (OSS)]

From: Jacky Bai <ping.bai@nxp.com>

Add 300MHz frequency config support on i.MX93 PLL.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index 2c4e64db828f..4bfebdb8d7a9 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -85,7 +85,8 @@ static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
 	PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6),
 	PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
 	PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
-	PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10)
+	PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10),
+	PLL_FRACN_GP(300000000U, 150, 0, 1, 0, 12)
 };
 
 struct imx_fracn_gppll_clk imx_fracn_gppll = {
-- 
2.37.1

[PATCH 6/6] clk: imx: Add 300MHz freq support for imx9 pll

[Peng Fan (OSS)]

From: Jacky Bai <ping.bai@nxp.com>

Add 300MHz frequency config support on i.MX93 PLL.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index 2c4e64db828f..4bfebdb8d7a9 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -85,7 +85,8 @@ static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
 	PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6),
 	PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
 	PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
-	PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10)
+	PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10),
+	PLL_FRACN_GP(300000000U, 150, 0, 1, 0, 12)
 };
 
 struct imx_fracn_gppll_clk imx_fracn_gppll = {
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/6] clk: imx: fracn-gppll: support integer pll

[kernel test robot]

Hi Peng,

I love your patch! Perhaps something to improve:

[auto build test WARNING on abelvesa/clk/imx]
[also build test WARNING on linus/master v6.3-rc4 next-20230331]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Peng-Fan-OSS/clk-imx-fracn-gppll-fix-the-rate-table/20230331-144314
base:   https://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux.git clk/imx
patch link:    https://lore.kernel.org/r/20230331064629.2475338-5-peng.fan%40oss.nxp.com
patch subject: [PATCH 4/6] clk: imx: fracn-gppll: support integer pll
config: ia64-allyesconfig (https://download.01.org/0day-ci/archive/20230331/202303311642.0nlzpIER-lkp@intel.com/config)
compiler: ia64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/b80cff81a332a2005b90c5c1fbab96e732c03494
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Peng-Fan-OSS/clk-imx-fracn-gppll-fix-the-rate-table/20230331-144314
        git checkout b80cff81a332a2005b90c5c1fbab96e732c03494
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 SHELL=/bin/bash drivers/clk/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Link: https://lore.kernel.org/oe-kbuild-all/202303311642.0nlzpIER-lkp@intel.com/

All warnings (new ones prefixed by >>):

>> drivers/clk/imx/clk-fracn-gppll.c:340:16: warning: no previous prototype for '_imx_clk_fracn_gppll' [-Wmissing-prototypes]
     340 | struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
         |                ^~~~~~~~~~~~~~~~~~~~


vim +/_imx_clk_fracn_gppll +340 drivers/clk/imx/clk-fracn-gppll.c

   339	
 > 340	struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
   341					    const struct imx_fracn_gppll_clk *pll_clk, u32 pll_flags)
   342	{
   343		struct clk_fracn_gppll *pll;
   344		struct clk_hw *hw;
   345		struct clk_init_data init;
   346		int ret;
   347	
   348		pll = kzalloc(sizeof(*pll), GFP_KERNEL);
   349		if (!pll)
   350			return ERR_PTR(-ENOMEM);
   351	
   352		init.name = name;
   353		init.flags = pll_clk->flags;
   354		init.parent_names = &parent_name;
   355		init.num_parents = 1;
   356		init.ops = &clk_fracn_gppll_ops;
   357	
   358		pll->base = base;
   359		pll->hw.init = &init;
   360		pll->rate_table = pll_clk->rate_table;
   361		pll->rate_count = pll_clk->rate_count;
   362		pll->flags = pll_flags;
   363	
   364		hw = &pll->hw;
   365	
   366		ret = clk_hw_register(NULL, hw);
   367		if (ret) {
   368			pr_err("%s: failed to register pll %s %d\n", __func__, name, ret);
   369			kfree(pll);
   370			return ERR_PTR(ret);
   371		}
   372	
   373		return hw;
   374	}
   375	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

Re: [PATCH 4/6] clk: imx: fracn-gppll: support integer pll

[kernel test robot]

Hi Peng,

I love your patch! Perhaps something to improve:

[auto build test WARNING on abelvesa/clk/imx]
[also build test WARNING on linus/master v6.3-rc4 next-20230331]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Peng-Fan-OSS/clk-imx-fracn-gppll-fix-the-rate-table/20230331-144314
base:   https://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux.git clk/imx
patch link:    https://lore.kernel.org/r/20230331064629.2475338-5-peng.fan%40oss.nxp.com
patch subject: [PATCH 4/6] clk: imx: fracn-gppll: support integer pll
config: ia64-allyesconfig (https://download.01.org/0day-ci/archive/20230331/202303311642.0nlzpIER-lkp@intel.com/config)
compiler: ia64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/b80cff81a332a2005b90c5c1fbab96e732c03494
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Peng-Fan-OSS/clk-imx-fracn-gppll-fix-the-rate-table/20230331-144314
        git checkout b80cff81a332a2005b90c5c1fbab96e732c03494
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 SHELL=/bin/bash drivers/clk/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Link: https://lore.kernel.org/oe-kbuild-all/202303311642.0nlzpIER-lkp@intel.com/

All warnings (new ones prefixed by >>):

>> drivers/clk/imx/clk-fracn-gppll.c:340:16: warning: no previous prototype for '_imx_clk_fracn_gppll' [-Wmissing-prototypes]
     340 | struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
         |                ^~~~~~~~~~~~~~~~~~~~


vim +/_imx_clk_fracn_gppll +340 drivers/clk/imx/clk-fracn-gppll.c

   339	
 > 340	struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
   341					    const struct imx_fracn_gppll_clk *pll_clk, u32 pll_flags)
   342	{
   343		struct clk_fracn_gppll *pll;
   344		struct clk_hw *hw;
   345		struct clk_init_data init;
   346		int ret;
   347	
   348		pll = kzalloc(sizeof(*pll), GFP_KERNEL);
   349		if (!pll)
   350			return ERR_PTR(-ENOMEM);
   351	
   352		init.name = name;
   353		init.flags = pll_clk->flags;
   354		init.parent_names = &parent_name;
   355		init.num_parents = 1;
   356		init.ops = &clk_fracn_gppll_ops;
   357	
   358		pll->base = base;
   359		pll->hw.init = &init;
   360		pll->rate_table = pll_clk->rate_table;
   361		pll->rate_count = pll_clk->rate_count;
   362		pll->flags = pll_flags;
   363	
   364		hw = &pll->hw;
   365	
   366		ret = clk_hw_register(NULL, hw);
   367		if (ret) {
   368			pr_err("%s: failed to register pll %s %d\n", __func__, name, ret);
   369			kfree(pll);
   370			return ERR_PTR(ret);
   371		}
   372	
   373		return hw;
   374	}
   375	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/6] clk: imx: imx93: Add nic and A55 clk

[Krzysztof Kozlowski]

On 31/03/2023 08:46, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> The A55 clock logic as below:

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC.  It might happen, that command when run on an older
kernel, gives you outdated entries.  Therefore please be sure you base
your patches on recent Linux kernel.

>      A55_PLL ----------------->\
>                                 A55_SEL-->A55_CORE
>      A55_CCM_ROOT--->A55_GATE->/
> 
> Add A55 CPU clk to support freq change.
> Add NIC CLK to reflect the clk status
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/clk/imx/clk-imx93.c             | 17 +++++++++++++++--
>  include/dt-bindings/clock/imx93-clock.h |  6 +++++-

NAK.

Bindings are always separate patches.

Best regards,
Krzysztof

Re: [PATCH 5/6] clk: imx: imx93: Add nic and A55 clk

[Krzysztof Kozlowski]

On 31/03/2023 08:46, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> The A55 clock logic as below:

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC.  It might happen, that command when run on an older
kernel, gives you outdated entries.  Therefore please be sure you base
your patches on recent Linux kernel.

>      A55_PLL ----------------->\
>                                 A55_SEL-->A55_CORE
>      A55_CCM_ROOT--->A55_GATE->/
> 
> Add A55 CPU clk to support freq change.
> Add NIC CLK to reflect the clk status
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/clk/imx/clk-imx93.c             | 17 +++++++++++++++--
>  include/dt-bindings/clock/imx93-clock.h |  6 +++++-

NAK.

Bindings are always separate patches.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/6] clk: imx: fracn-gppll: support integer pll

[kernel test robot]

Hi Peng,

I love your patch! Perhaps something to improve:

[auto build test WARNING on abelvesa/clk/imx]
[also build test WARNING on linus/master v6.3-rc4 next-20230331]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Peng-Fan-OSS/clk-imx-fracn-gppll-fix-the-rate-table/20230331-144314
base:   https://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux.git clk/imx
patch link:    https://lore.kernel.org/r/20230331064629.2475338-5-peng.fan%40oss.nxp.com
patch subject: [PATCH 4/6] clk: imx: fracn-gppll: support integer pll
config: hexagon-randconfig-r045-20230329 (https://download.01.org/0day-ci/archive/20230331/202303312017.I9c9cLVj-lkp@intel.com/config)
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project 67409911353323ca5edf2049ef0df54132fa1ca7)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/b80cff81a332a2005b90c5c1fbab96e732c03494
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Peng-Fan-OSS/clk-imx-fracn-gppll-fix-the-rate-table/20230331-144314
        git checkout b80cff81a332a2005b90c5c1fbab96e732c03494
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash drivers/clk/imx/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Link: https://lore.kernel.org/oe-kbuild-all/202303312017.I9c9cLVj-lkp@intel.com/

All warnings (new ones prefixed by >>):

   In file included from drivers/clk/imx/clk-fracn-gppll.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/hexagon/include/asm/io.h:334:
   include/asm-generic/io.h:547:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __raw_readb(PCI_IOBASE + addr);
                             ~~~~~~~~~~ ^
   include/asm-generic/io.h:560:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
   #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
                                                     ^
   In file included from drivers/clk/imx/clk-fracn-gppll.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/hexagon/include/asm/io.h:334:
   include/asm-generic/io.h:573:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
   #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
                                                     ^
   In file included from drivers/clk/imx/clk-fracn-gppll.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/hexagon/include/asm/io.h:334:
   include/asm-generic/io.h:584:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writeb(value, PCI_IOBASE + addr);
                               ~~~~~~~~~~ ^
   include/asm-generic/io.h:594:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
   include/asm-generic/io.h:604:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
>> drivers/clk/imx/clk-fracn-gppll.c:340:16: warning: no previous prototype for function '_imx_clk_fracn_gppll' [-Wmissing-prototypes]
   struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
                  ^
   drivers/clk/imx/clk-fracn-gppll.c:340:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
   struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
   ^
   static 
   7 warnings generated.


vim +/_imx_clk_fracn_gppll +340 drivers/clk/imx/clk-fracn-gppll.c

   339	
 > 340	struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
   341					    const struct imx_fracn_gppll_clk *pll_clk, u32 pll_flags)
   342	{
   343		struct clk_fracn_gppll *pll;
   344		struct clk_hw *hw;
   345		struct clk_init_data init;
   346		int ret;
   347	
   348		pll = kzalloc(sizeof(*pll), GFP_KERNEL);
   349		if (!pll)
   350			return ERR_PTR(-ENOMEM);
   351	
   352		init.name = name;
   353		init.flags = pll_clk->flags;
   354		init.parent_names = &parent_name;
   355		init.num_parents = 1;
   356		init.ops = &clk_fracn_gppll_ops;
   357	
   358		pll->base = base;
   359		pll->hw.init = &init;
   360		pll->rate_table = pll_clk->rate_table;
   361		pll->rate_count = pll_clk->rate_count;
   362		pll->flags = pll_flags;
   363	
   364		hw = &pll->hw;
   365	
   366		ret = clk_hw_register(NULL, hw);
   367		if (ret) {
   368			pr_err("%s: failed to register pll %s %d\n", __func__, name, ret);
   369			kfree(pll);
   370			return ERR_PTR(ret);
   371		}
   372	
   373		return hw;
   374	}
   375	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

Re: [PATCH 4/6] clk: imx: fracn-gppll: support integer pll

[kernel test robot]

Hi Peng,

I love your patch! Perhaps something to improve:

[auto build test WARNING on abelvesa/clk/imx]
[also build test WARNING on linus/master v6.3-rc4 next-20230331]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Peng-Fan-OSS/clk-imx-fracn-gppll-fix-the-rate-table/20230331-144314
base:   https://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux.git clk/imx
patch link:    https://lore.kernel.org/r/20230331064629.2475338-5-peng.fan%40oss.nxp.com
patch subject: [PATCH 4/6] clk: imx: fracn-gppll: support integer pll
config: hexagon-randconfig-r045-20230329 (https://download.01.org/0day-ci/archive/20230331/202303312017.I9c9cLVj-lkp@intel.com/config)
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project 67409911353323ca5edf2049ef0df54132fa1ca7)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/b80cff81a332a2005b90c5c1fbab96e732c03494
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Peng-Fan-OSS/clk-imx-fracn-gppll-fix-the-rate-table/20230331-144314
        git checkout b80cff81a332a2005b90c5c1fbab96e732c03494
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash drivers/clk/imx/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Link: https://lore.kernel.org/oe-kbuild-all/202303312017.I9c9cLVj-lkp@intel.com/

All warnings (new ones prefixed by >>):

   In file included from drivers/clk/imx/clk-fracn-gppll.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/hexagon/include/asm/io.h:334:
   include/asm-generic/io.h:547:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __raw_readb(PCI_IOBASE + addr);
                             ~~~~~~~~~~ ^
   include/asm-generic/io.h:560:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
   #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
                                                     ^
   In file included from drivers/clk/imx/clk-fracn-gppll.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/hexagon/include/asm/io.h:334:
   include/asm-generic/io.h:573:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
   #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
                                                     ^
   In file included from drivers/clk/imx/clk-fracn-gppll.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/hexagon/include/asm/io.h:334:
   include/asm-generic/io.h:584:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writeb(value, PCI_IOBASE + addr);
                               ~~~~~~~~~~ ^
   include/asm-generic/io.h:594:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
   include/asm-generic/io.h:604:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
>> drivers/clk/imx/clk-fracn-gppll.c:340:16: warning: no previous prototype for function '_imx_clk_fracn_gppll' [-Wmissing-prototypes]
   struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
                  ^
   drivers/clk/imx/clk-fracn-gppll.c:340:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
   struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
   ^
   static 
   7 warnings generated.


vim +/_imx_clk_fracn_gppll +340 drivers/clk/imx/clk-fracn-gppll.c

   339	
 > 340	struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
   341					    const struct imx_fracn_gppll_clk *pll_clk, u32 pll_flags)
   342	{
   343		struct clk_fracn_gppll *pll;
   344		struct clk_hw *hw;
   345		struct clk_init_data init;
   346		int ret;
   347	
   348		pll = kzalloc(sizeof(*pll), GFP_KERNEL);
   349		if (!pll)
   350			return ERR_PTR(-ENOMEM);
   351	
   352		init.name = name;
   353		init.flags = pll_clk->flags;
   354		init.parent_names = &parent_name;
   355		init.num_parents = 1;
   356		init.ops = &clk_fracn_gppll_ops;
   357	
   358		pll->base = base;
   359		pll->hw.init = &init;
   360		pll->rate_table = pll_clk->rate_table;
   361		pll->rate_count = pll_clk->rate_count;
   362		pll->flags = pll_flags;
   363	
   364		hw = &pll->hw;
   365	
   366		ret = clk_hw_register(NULL, hw);
   367		if (ret) {
   368			pr_err("%s: failed to register pll %s %d\n", __func__, name, ret);
   369			kfree(pll);
   370			return ERR_PTR(ret);
   371		}
   372	
   373		return hw;
   374	}
   375	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel