* [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks
@ 2023-04-14 8:36 Bhanuprakash Modem
2023-04-14 8:36 ` [igt-dev] [i-g-t V3 1/6] lib/igt_kms: " Bhanuprakash Modem
` (7 more replies)
0 siblings, 8 replies; 10+ messages in thread
From: Bhanuprakash Modem @ 2023-04-14 8:36 UTC (permalink / raw)
To: igt-dev
Bigjoiner will come in the picture when the resolution > 5K or
clock > max dot-clock. Add a support to check the selected mode
clock is greater than the max dot-clock.
Bhanuprakash Modem (6):
lib/igt_kms: Fix Bigjoiner checks
tests/i915/kms_big_joiner: Fix Bigjoiner checks
tests/i915/kms_dsc: Update bigjoiner pipe constraint
tests/kms_invalid_mode: Use helpers from IGT lib
tests/kms_flip: Fix Bigjoiner checks
tests/kms_setmode: Fix Bigjoiner checks
lib/igt_kms.c | 56 ++++++++++++++++++++++++--
lib/igt_kms.h | 2 +
tests/i915/kms_big_joiner.c | 80 ++++++++++++++++++++++---------------
tests/i915/kms_dsc.c | 30 +++++++-------
tests/i915/kms_dsc_helper.h | 2 -
tests/kms_flip.c | 12 +++---
tests/kms_invalid_mode.c | 23 +----------
tests/kms_setmode.c | 15 ++++---
8 files changed, 133 insertions(+), 87 deletions(-)
--
2.40.0
^ permalink raw reply [flat|nested] 10+ messages in thread
* [igt-dev] [i-g-t V3 1/6] lib/igt_kms: Fix Bigjoiner checks
2023-04-14 8:36 [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks Bhanuprakash Modem
@ 2023-04-14 8:36 ` Bhanuprakash Modem
2023-04-14 8:36 ` [igt-dev] [i-g-t V3 2/6] tests/i915/kms_big_joiner: " Bhanuprakash Modem
` (6 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Bhanuprakash Modem @ 2023-04-14 8:36 UTC (permalink / raw)
To: igt-dev
Bigjoiner will come in the picture when the resolution > 5K or
clock > max dot-clock. Add a support to check the selected mode
clock is greater than the max dot-clock.
V2: - Update helper comments (Ankit)
- New helper to check Bigjoiner requirement (Ankit)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
lib/igt_kms.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++----
lib/igt_kms.h | 2 ++
2 files changed, 54 insertions(+), 4 deletions(-)
diff --git a/lib/igt_kms.c b/lib/igt_kms.c
index 50655f136b8..8e305601b7f 100644
--- a/lib/igt_kms.c
+++ b/lib/igt_kms.c
@@ -5813,6 +5813,51 @@ bool igt_max_bpc_constraint(igt_display_t *display, enum pipe pipe,
return false;
}
+/*
+ * igt_get_max_dotclock:
+ * @fd: A drm file descriptor
+ *
+ * Get the Max pixel clock frequency from intel specific debugfs
+ * "i915_frequency_info".
+ *
+ * Returns: Max supported pixel clock frequency.
+ */
+int igt_get_max_dotclock(int fd)
+{
+ char buf[4096];
+ char *s;
+ int max_dotclock = 0;
+
+ if (!is_i915_device(fd))
+ return max_dotclock;
+
+ igt_debugfs_read(fd, "i915_frequency_info", buf);
+ s = strstr(buf, "Max pixel clock frequency:");
+ igt_assert(s);
+ igt_assert_eq(sscanf(s, "Max pixel clock frequency: %d kHz", &max_dotclock), 1);
+
+ /* 100 Mhz to 5 GHz seem like reasonable values to expect */
+ igt_assert_lt(max_dotclock, 5000000);
+ igt_assert_lt(100000, max_dotclock);
+
+ return max_dotclock;
+}
+
+/* igt_bigjoiner_possible:
+ * @mode: libdrm mode
+ * @max_dotclock: Max pixel clock frequency
+ *
+ * Bigjoiner will come into the picture, when the requested
+ * mode resolution > 5K or mode clock > max_dotclock.
+ *
+ * Returns: True if mode requires Bigjoiner, else False.
+ */
+bool igt_bigjoiner_possible(drmModeModeInfo *mode, int max_dotclock)
+{
+ return (mode->hdisplay > MAX_HDISPLAY_PER_PIPE ||
+ mode->clock > max_dotclock);
+}
+
/*
* igt_check_bigjoiner_support:
* @display: a pointer to an #igt_display_t structure
@@ -5835,6 +5880,7 @@ bool igt_check_bigjoiner_support(igt_display_t *display)
enum pipe idx;
drmModeModeInfo *mode;
} pipes[IGT_MAX_PIPES];
+ int max_dotclock;
/* Get total enabled pipes. */
for_each_pipe(display, p)
@@ -5858,22 +5904,24 @@ bool igt_check_bigjoiner_support(igt_display_t *display)
return true;
}
+ max_dotclock = igt_get_max_dotclock(display->drm_fd);
+
/*
- * if mode.hdisplay > 5120, then ignore
+ * if mode resolution > 5K (or) mode.clock > max dot-clock, then ignore
* - if the consecutive pipe is not available
* - last crtc in single/multi-connector config
* - consecutive crtcs in multi-connector config
*
* in multi-connector config ignore if
- * - previous crtc mode.hdisplay > 5120 and
+ * - previous crtc (mode resolution > 5K or mode.clock > max dot-clock) and
* - current & previous crtcs are consecutive
*/
for (i = 0; i < pipes_in_use; i++) {
- if (((pipes[i].mode->hdisplay > MAX_HDISPLAY_PER_PIPE) &&
+ if ((igt_bigjoiner_possible(pipes[i].mode, max_dotclock) &&
((pipes[i].idx >= (total_pipes - 1)) ||
(!display->pipes[pipes[i].idx + 1].enabled) ||
((i < (pipes_in_use - 1)) && (abs(pipes[i + 1].idx - pipes[i].idx) <= 1)))) ||
- ((i > 0) && (pipes[i - 1].mode->hdisplay > MAX_HDISPLAY_PER_PIPE) &&
+ ((i > 0) && igt_bigjoiner_possible(pipes[i - 1].mode, max_dotclock) &&
((!display->pipes[pipes[i - 1].idx + 1].enabled) ||
(abs(pipes[i].idx - pipes[i - 1].idx) <= 1)))) {
igt_debug("Pipe/Output combo is not possible with selected mode(s).\n");
diff --git a/lib/igt_kms.h b/lib/igt_kms.h
index 2b917925158..df90bb2330d 100644
--- a/lib/igt_kms.h
+++ b/lib/igt_kms.h
@@ -990,6 +990,8 @@ void igt_sort_connector_modes(drmModeConnector *connector,
bool igt_max_bpc_constraint(igt_display_t *display, enum pipe pipe,
igt_output_t *output, int bpc);
+int igt_get_max_dotclock(int fd);
+bool igt_bigjoiner_possible(drmModeModeInfo *mode, int max_dotclock);
bool igt_check_bigjoiner_support(igt_display_t *display);
bool igt_parse_mode_string(const char *mode_string, drmModeModeInfo *mode);
bool i915_pipe_output_combo_valid(igt_display_t *display);
--
2.40.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [igt-dev] [i-g-t V3 2/6] tests/i915/kms_big_joiner: Fix Bigjoiner checks
2023-04-14 8:36 [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks Bhanuprakash Modem
2023-04-14 8:36 ` [igt-dev] [i-g-t V3 1/6] lib/igt_kms: " Bhanuprakash Modem
@ 2023-04-14 8:36 ` Bhanuprakash Modem
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 3/6] tests/i915/kms_dsc: Update bigjoiner pipe constraint Bhanuprakash Modem
` (5 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Bhanuprakash Modem @ 2023-04-14 8:36 UTC (permalink / raw)
To: igt-dev
Bigjoiner will come in the picture when the resolution > 5K or
clock > max dot-clock. Add a support to check the selected mode
clock is greater than the max dot-clock.
V2: - Handle both 5k & max dot clock cases
- Other minor cleanups
V3: - Fix the logic to avoid the retry
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
---
tests/i915/kms_big_joiner.c | 80 ++++++++++++++++++++++---------------
1 file changed, 48 insertions(+), 32 deletions(-)
diff --git a/tests/i915/kms_big_joiner.c b/tests/i915/kms_big_joiner.c
index 8be60ea1176..74639df9d69 100644
--- a/tests/i915/kms_big_joiner.c
+++ b/tests/i915/kms_big_joiner.c
@@ -26,10 +26,13 @@
#include "igt.h"
-#define MAX_HDISPLAY_PER_PIPE 5120
-
IGT_TEST_DESCRIPTION("Test big joiner");
+struct big_joiner_output {
+ uint32_t output_id;
+ drmModeModeInfo mode;
+};
+
typedef struct {
int drm_fd;
igt_display_t display;
@@ -37,9 +40,11 @@ typedef struct {
int n_pipes;
enum pipe pipe1;
enum pipe pipe2;
- uint32_t big_joiner_output[2];
+ struct big_joiner_output output[2];
} data_t;
+static int max_dotclock;
+
static void test_invalid_modeset(data_t *data)
{
igt_output_t *output;
@@ -91,7 +96,7 @@ static void test_basic_modeset(data_t *data)
igt_display_reset(display);
for_each_connected_output(display, output) {
- if (data->big_joiner_output[0] == output->id) {
+ if (data->output[0].output_id == output->id) {
big_joiner_output = output;
break;
}
@@ -99,9 +104,7 @@ static void test_basic_modeset(data_t *data)
igt_output_set_pipe(big_joiner_output, data->pipe1);
- igt_sort_connector_modes(big_joiner_output->config.connector,
- sort_drm_modes_by_res_dsc);
- mode = &big_joiner_output->config.connector->modes[0];
+ mode = &data->output[0].mode;
igt_output_override_mode(big_joiner_output, mode);
pipe = &display->pipes[data->pipe1];
@@ -130,7 +133,7 @@ static void test_dual_display(data_t *data)
igt_display_reset(display);
for_each_connected_output(display, output) {
- if (data->big_joiner_output[count] == output->id) {
+ if (data->output[count].output_id == output->id) {
big_joiner_output[count] = output;
count++;
}
@@ -143,9 +146,7 @@ static void test_dual_display(data_t *data)
igt_output_set_pipe(big_joiner_output[1], data->pipe2);
/* Set up first big joiner output on Pipe A*/
- igt_sort_connector_modes(big_joiner_output[0]->config.connector,
- sort_drm_modes_by_res_dsc);
- mode = &big_joiner_output[0]->config.connector->modes[0];
+ mode = &data->output[0].mode;
igt_output_override_mode(big_joiner_output[0], mode);
pipe = &display->pipes[data->pipe1];
@@ -156,9 +157,7 @@ static void test_dual_display(data_t *data)
igt_plane_set_size(plane1, mode->hdisplay, mode->vdisplay);
/* Set up second big joiner output on Pipe C*/
- igt_sort_connector_modes(big_joiner_output[1]->config.connector,
- sort_drm_modes_by_res_dsc);
- mode = &big_joiner_output[1]->config.connector->modes[0];
+ mode = &data->output[1].mode;
igt_output_override_mode(big_joiner_output[1], mode);
pipe = &display->pipes[data->pipe2];
@@ -178,6 +177,16 @@ static void test_dual_display(data_t *data)
igt_display_commit2(display, COMMIT_ATOMIC);
}
+static bool bigjoiner_mode_found(drmModeConnector *connector,
+ int (*sort_method)(const void *, const void*),
+ drmModeModeInfo *mode)
+{
+ igt_sort_connector_modes(connector, sort_method);
+ *mode = connector->modes[0];
+
+ return igt_bigjoiner_possible(mode, max_dotclock);
+}
+
igt_main
{
data_t data;
@@ -194,13 +203,24 @@ igt_main
igt_display_require(&data.display, data.drm_fd);
igt_require(data.display.is_atomic);
- for_each_connected_output(&data.display, output) {
- igt_sort_connector_modes(output->config.connector,
- sort_drm_modes_by_res_dsc);
+ max_dotclock = igt_get_max_dotclock(data.drm_fd);
- mode = &output->config.connector->modes[0];
- if (mode->hdisplay > MAX_HDISPLAY_PER_PIPE) {
- data.big_joiner_output[count++] = output->id;
+ for_each_connected_output(&data.display, output) {
+ bool found = false;
+ drmModeConnector *connector = output->config.connector;
+
+ /*
+ * Bigjoiner will come in the picture when
+ * the resolution > 5K or clock > max-dot-clock.
+ */
+ found = (bigjoiner_mode_found(connector, sort_drm_modes_by_res_dsc, mode) ||
+ bigjoiner_mode_found(connector, sort_drm_modes_by_clk_dsc, mode)) ?
+ true : false;
+
+ if (found) {
+ data.output[count].output_id = output->id;
+ memcpy(&data.output[count].mode, mode, sizeof(drmModeModeInfo));
+ count++;
width = max(width, mode->hdisplay);
height = max(height, mode->vdisplay);
@@ -215,7 +235,7 @@ igt_main
j++;
}
- igt_require_f(count > 0, "No output with 5k+ mode found\n");
+ igt_require_f(count > 0, "No output with 5k+ mode (or) clock > max-dot-clock found\n");
igt_create_pattern_fb(data.drm_fd, width, height, DRM_FORMAT_XRGB8888,
DRM_FORMAT_MOD_LINEAR, &data.fb);
@@ -237,14 +257,12 @@ igt_main
igt_display_reset(&data.display);
for_each_connected_output(&data.display, output) {
- if (data.big_joiner_output[0] != output->id)
+ if (data.output[0].output_id != output->id)
continue;
- igt_sort_connector_modes(output->config.connector,
- sort_drm_modes_by_res_dsc);
-
+ mode = &data.output[0].mode;
igt_output_set_pipe(output, data.pipe1);
- igt_output_override_mode(output, &output->config.connector->modes[0]);
+ igt_output_override_mode(output, mode);
igt_dynamic_f("pipe-%s-%s",
kmstest_pipe_name(data.pipe1),
@@ -261,17 +279,15 @@ igt_main
igt_display_reset(&data.display);
for_each_connected_output(&data.display, output) {
- igt_sort_connector_modes(output->config.connector,
- sort_drm_modes_by_res_dsc);
-
- if (data.big_joiner_output[0] == output->id) {
+ if (data.output[0].output_id == output->id) {
first_output = output;
+ mode = &data.output[0].mode;
+
igt_output_set_pipe(output, data.pipe1);
- igt_output_override_mode(output, &output->config.connector->modes[0]);
+ igt_output_override_mode(output, mode);
} else if (second_output == NULL) {
second_output = output;
igt_output_set_pipe(output, data.pipe2);
- igt_output_override_mode(output, &output->config.connector->modes[0]);
break;
}
--
2.40.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [igt-dev] [i-g-t V3 3/6] tests/i915/kms_dsc: Update bigjoiner pipe constraint
2023-04-14 8:36 [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks Bhanuprakash Modem
2023-04-14 8:36 ` [igt-dev] [i-g-t V3 1/6] lib/igt_kms: " Bhanuprakash Modem
2023-04-14 8:36 ` [igt-dev] [i-g-t V3 2/6] tests/i915/kms_big_joiner: " Bhanuprakash Modem
@ 2023-04-14 8:37 ` Bhanuprakash Modem
2023-04-14 9:53 ` Karthik B S
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 4/6] tests/kms_invalid_mode: Use helpers from IGT lib Bhanuprakash Modem
` (4 subsequent siblings)
7 siblings, 1 reply; 10+ messages in thread
From: Bhanuprakash Modem @ 2023-04-14 8:37 UTC (permalink / raw)
To: igt-dev
Instead of writing own logic at test level, use existing IGT
helper to check the bigjoiner support.
V2: - git squash to include i915_pipe_output_combo_valid()
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
---
tests/i915/kms_dsc.c | 30 +++++++++++++++---------------
tests/i915/kms_dsc_helper.h | 2 --
2 files changed, 15 insertions(+), 17 deletions(-)
diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c
index b3c5e60c773..cf34dc8a8b0 100644
--- a/tests/i915/kms_dsc.c
+++ b/tests/i915/kms_dsc.c
@@ -47,7 +47,6 @@ typedef struct {
unsigned int plane_format;
igt_output_t *output;
int input_bpc;
- int n_pipes;
int disp_ver;
enum pipe pipe;
} data_t;
@@ -72,19 +71,24 @@ static drmModeModeInfo *get_highres_mode(igt_output_t *output)
return highest_mode;
}
-static bool check_big_joiner_pipe_constraint(data_t *data)
+static bool pipe_output_combo_valid(data_t *data)
{
igt_output_t *output = data->output;
- drmModeModeInfo *mode = get_highres_mode(output);
+ drmModeModeInfo *mode;
+ bool ret = true;
- if (mode->hdisplay >= HDISPLAY_5K &&
- data->pipe == (data->n_pipes - 1)) {
- igt_debug("Pipe-%s not supported due to bigjoiner limitation\n",
- kmstest_pipe_name(data->pipe));
- return false;
- }
+ igt_display_reset(&data->display);
+ mode = get_highres_mode(output);
+
+ igt_output_set_pipe(output, data->pipe);
+ igt_output_override_mode(output, mode);
+
+ if (!i915_pipe_output_combo_valid(&data->display))
+ ret = false;
+
+ igt_output_set_pipe(output, PIPE_NONE);
- return true;
+ return ret;
}
static void test_cleanup(data_t *data)
@@ -190,7 +194,7 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
if (!check_gen11_bpc_constraint(data->drm_fd, data->output, data->input_bpc))
continue;
- if (!check_big_joiner_pipe_constraint(data))
+ if (!pipe_output_combo_valid(data))
continue;
if (test_type == TEST_DSC_BPC)
@@ -206,7 +210,6 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
igt_main
{
data_t data = {};
- int i;
igt_fixture {
data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
@@ -217,9 +220,6 @@ igt_main
igt_display_require(&data.display, data.drm_fd);
igt_display_require_output(&data.display);
igt_require(data.disp_ver >= 11);
- data.n_pipes = 0;
- for_each_pipe(&data.display, i)
- data.n_pipes++;
}
igt_describe("Tests basic display stream compression functionality if supported "
diff --git a/tests/i915/kms_dsc_helper.h b/tests/i915/kms_dsc_helper.h
index fe479dac472..b3828dcd44a 100644
--- a/tests/i915/kms_dsc_helper.h
+++ b/tests/i915/kms_dsc_helper.h
@@ -21,8 +21,6 @@
#include <fcntl.h>
#include <termios.h>
-#define HDISPLAY_5K 5120
-
void force_dsc_enable(int drmfd, igt_output_t *output);
void force_dsc_enable_bpc(int drmfd, igt_output_t *output, int input_bpc);
void save_force_dsc_en(int drmfd, igt_output_t *output);
--
2.40.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [igt-dev] [i-g-t V3 4/6] tests/kms_invalid_mode: Use helpers from IGT lib
2023-04-14 8:36 [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks Bhanuprakash Modem
` (2 preceding siblings ...)
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 3/6] tests/i915/kms_dsc: Update bigjoiner pipe constraint Bhanuprakash Modem
@ 2023-04-14 8:37 ` Bhanuprakash Modem
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 5/6] tests/kms_flip: Fix Bigjoiner checks Bhanuprakash Modem
` (3 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Bhanuprakash Modem @ 2023-04-14 8:37 UTC (permalink / raw)
To: igt-dev
Instead of writing own logic at test level, use existing IGT
helper to read the max dot clock.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
---
tests/kms_invalid_mode.c | 23 +----------------------
1 file changed, 1 insertion(+), 22 deletions(-)
diff --git a/tests/kms_invalid_mode.c b/tests/kms_invalid_mode.c
index 86f529e88b1..ec048305567 100644
--- a/tests/kms_invalid_mode.c
+++ b/tests/kms_invalid_mode.c
@@ -213,27 +213,6 @@ test_output(data_t *data)
igt_remove_fb(data->drm_fd, &fb);
}
-static int i915_max_dotclock(data_t *data)
-{
- char buf[4096];
- char *s;
- int max_dotclock = 0;
-
- if (!is_i915_device(data->drm_fd))
- return 0;
-
- igt_debugfs_read(data->drm_fd, "i915_frequency_info", buf);
- s = strstr(buf, "Max pixel clock frequency:");
- igt_assert(s);
- igt_assert_eq(sscanf(s, "Max pixel clock frequency: %d kHz", &max_dotclock), 1);
-
- /* 100 Mhz to 5 GHz seem like reasonable values to expect */
- igt_assert_lt(max_dotclock, 5000000);
- igt_assert_lt(100000, max_dotclock);
-
- return max_dotclock;
-}
-
static const struct {
const char *name;
bool (*adjust_mode)(data_t *data, drmModeModeInfoPtr mode);
@@ -293,7 +272,7 @@ igt_main
data.res = drmModeGetResources(data.drm_fd);
igt_assert(data.res);
- data.max_dotclock = i915_max_dotclock(&data);
+ data.max_dotclock = igt_get_max_dotclock(data.drm_fd);
igt_info("Max dotclock: %d kHz\n", data.max_dotclock);
}
--
2.40.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [igt-dev] [i-g-t V3 5/6] tests/kms_flip: Fix Bigjoiner checks
2023-04-14 8:36 [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks Bhanuprakash Modem
` (3 preceding siblings ...)
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 4/6] tests/kms_invalid_mode: Use helpers from IGT lib Bhanuprakash Modem
@ 2023-04-14 8:37 ` Bhanuprakash Modem
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 6/6] tests/kms_setmode: " Bhanuprakash Modem
` (2 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Bhanuprakash Modem @ 2023-04-14 8:37 UTC (permalink / raw)
To: igt-dev
Bigjoiner will come in the picture when the resolution > 5K or
clock > max dot-clock. Add a support to check the selected mode
clock is greater than the max dot-clock.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
---
tests/kms_flip.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/tests/kms_flip.c b/tests/kms_flip.c
index 5e82f4a2f84..7cb8749c930 100755
--- a/tests/kms_flip.c
+++ b/tests/kms_flip.c
@@ -81,8 +81,6 @@
#define RUN_TEST 1
#define RUN_PAIR 2
-#define MAX_HDISPLAY_PER_CRTC 5120
-
#ifndef DRM_CAP_TIMESTAMP_MONOTONIC
#define DRM_CAP_TIMESTAMP_MONOTONIC 6
#endif
@@ -96,6 +94,7 @@ uint32_t devid;
int test_time = 3;
static bool monotonic_timestamp;
static pthread_t vblank_wait_thread;
+static int max_dotclock;
static drmModeConnector *last_connector;
@@ -1528,19 +1527,19 @@ static void run_test_on_crtc_set(struct test_output *o, int *crtc_idxs,
/*
* Handle BW limitations:
*
- * if mode.hdisplay > 5120, then ignore
+ * if mode resolution > 5K (or) mode clock > max_dotclock, then ignore
* - last crtc in single/multi-connector config
* - consecutive crtcs in multi-connector config
*
* in multi-connector config ignore if
- * - previous crtc mode.hdisplay > 5120 and
+ * - previous crtc (mode resolution > 5K or mode clock > max_dotclock) and
* - current & previous crtcs are consecutive
*/
for (i = 0; i < crtc_count; i++) {
- if (((o->kmode[i].hdisplay > MAX_HDISPLAY_PER_CRTC) &&
+ if ((igt_bigjoiner_possible(&o->kmode[i], max_dotclock) &&
((crtc_idxs[i] >= (total_crtcs - 1)) ||
((i < (crtc_count - 1)) && (abs(crtc_idxs[i + 1] - crtc_idxs[i]) <= 1)))) ||
- ((i > 0) && (o->kmode[i - 1].hdisplay > MAX_HDISPLAY_PER_CRTC) &&
+ ((i > 0) && igt_bigjoiner_possible(&o->kmode[i - 1], max_dotclock) &&
(abs(crtc_idxs[i] - crtc_idxs[i - 1]) <= 1))) {
igt_debug("Combo: %s is not possible with selected mode(s).\n", test_name);
@@ -1822,6 +1821,7 @@ igt_main_args("e", NULL, help_str, opt_handler, NULL)
for (i = 0; i < sizeof(tests) / sizeof(tests[0]); i++)
tests[i].flags &= ~(TEST_CHECK_TS | TEST_VBLANK_EXPIRED_SEQ);
}
+ max_dotclock = igt_get_max_dotclock(drm_fd);
}
igt_describe("Tests that nonblocking reading fails correctly");
--
2.40.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [igt-dev] [i-g-t V3 6/6] tests/kms_setmode: Fix Bigjoiner checks
2023-04-14 8:36 [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks Bhanuprakash Modem
` (4 preceding siblings ...)
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 5/6] tests/kms_flip: Fix Bigjoiner checks Bhanuprakash Modem
@ 2023-04-14 8:37 ` Bhanuprakash Modem
2023-04-14 11:39 ` [igt-dev] ✓ Fi.CI.BAT: success for Fix Bigjoiner checks (rev5) Patchwork
2023-04-14 15:05 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
7 siblings, 0 replies; 10+ messages in thread
From: Bhanuprakash Modem @ 2023-04-14 8:37 UTC (permalink / raw)
To: igt-dev
Bigjoiner will come in the picture when the resolution > 5K or
clock > max dot-clock. Add a support to check the selected mode
clock is greater than the max dot-clock.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
---
tests/kms_setmode.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/tests/kms_setmode.c b/tests/kms_setmode.c
index bfa108916ce..7932a3ec285 100644
--- a/tests/kms_setmode.c
+++ b/tests/kms_setmode.c
@@ -40,13 +40,12 @@
/* restricted pipe count */
#define CRTC_RESTRICT_CNT 2
-#define MAX_HDISPLAY_PER_CRTC 5120
-
static int drm_fd;
static drmModeRes *drm_resources;
static int filter_test_id;
static bool dry_run;
static bool extended = false;
+static int max_dotclock;
const drmModeModeInfo mode_640_480 = {
.name = "640x480",
@@ -664,18 +663,20 @@ static void test_one_combination(const struct test_config *tconf,
struct crtc_config *crtc = &crtcs[i];
/*
- * if mode.hdisplay > 5120, then ignore
+ * if mode resolution > 5K (or) mode clock > max_dotclock,
+ * then ignore
* - last crtc in single/multi-connector config
* - consecutive crtcs in multi-connector config
*
* in multi-connector config ignore if
- * - previous crtc mode.hdisplay > 5120 and
+ * - previous crtc (mode resolution > 5K (or)
+ * mode clock > max_dotclock) and
* - current & previous crtcs are consecutive
*/
- if (((crtc->mode.hdisplay > MAX_HDISPLAY_PER_CRTC) &&
+ if ((igt_bigjoiner_possible(&crtc->mode, max_dotclock) &&
((crtc->crtc_idx >= (tconf->resources->count_crtcs - 1)) ||
((i < (crtc_count - 1)) && (abs(crtcs[i + 1].crtc_idx - crtc->crtc_idx) <= 1)))) ||
- ((i > 0) && (crtc[i - 1].mode.hdisplay > MAX_HDISPLAY_PER_CRTC) &&
+ ((i > 0) && igt_bigjoiner_possible(&crtc[i - 1].mode, max_dotclock) &&
(abs(crtc->crtc_idx - crtcs[i - 1].crtc_idx) <= 1))) {
igt_info("Combo: %s is not possible with selected mode(s).\n", test_name);
goto out;
@@ -954,6 +955,8 @@ igt_main_args("det:", NULL, help_str, opt_handler, NULL)
drm_resources = drmModeGetResources(drm_fd);
igt_require(drm_resources);
+
+ max_dotclock = igt_get_max_dotclock(drm_fd);
}
for (i = 0; i < ARRAY_SIZE(tests); i++) {
--
2.40.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [igt-dev] [i-g-t V3 3/6] tests/i915/kms_dsc: Update bigjoiner pipe constraint
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 3/6] tests/i915/kms_dsc: Update bigjoiner pipe constraint Bhanuprakash Modem
@ 2023-04-14 9:53 ` Karthik B S
0 siblings, 0 replies; 10+ messages in thread
From: Karthik B S @ 2023-04-14 9:53 UTC (permalink / raw)
To: Bhanuprakash Modem, igt-dev
On 4/14/2023 2:07 PM, Bhanuprakash Modem wrote:
> Instead of writing own logic at test level, use existing IGT
> helper to check the bigjoiner support.
>
> V2: - git squash to include i915_pipe_output_combo_valid()
>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
> ---
> tests/i915/kms_dsc.c | 30 +++++++++++++++---------------
> tests/i915/kms_dsc_helper.h | 2 --
> 2 files changed, 15 insertions(+), 17 deletions(-)
>
> diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c
> index b3c5e60c773..cf34dc8a8b0 100644
> --- a/tests/i915/kms_dsc.c
> +++ b/tests/i915/kms_dsc.c
> @@ -47,7 +47,6 @@ typedef struct {
> unsigned int plane_format;
> igt_output_t *output;
> int input_bpc;
> - int n_pipes;
> int disp_ver;
> enum pipe pipe;
> } data_t;
> @@ -72,19 +71,24 @@ static drmModeModeInfo *get_highres_mode(igt_output_t *output)
> return highest_mode;
> }
>
> -static bool check_big_joiner_pipe_constraint(data_t *data)
> +static bool pipe_output_combo_valid(data_t *data)
> {
> igt_output_t *output = data->output;
> - drmModeModeInfo *mode = get_highres_mode(output);
> + drmModeModeInfo *mode;
> + bool ret = true;
>
> - if (mode->hdisplay >= HDISPLAY_5K &&
> - data->pipe == (data->n_pipes - 1)) {
> - igt_debug("Pipe-%s not supported due to bigjoiner limitation\n",
> - kmstest_pipe_name(data->pipe));
> - return false;
> - }
> + igt_display_reset(&data->display);
> + mode = get_highres_mode(output);
> +
> + igt_output_set_pipe(output, data->pipe);
> + igt_output_override_mode(output, mode);
> +
> + if (!i915_pipe_output_combo_valid(&data->display))
> + ret = false;
> +
> + igt_output_set_pipe(output, PIPE_NONE);
>
> - return true;
> + return ret;
> }
>
> static void test_cleanup(data_t *data)
> @@ -190,7 +194,7 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
> if (!check_gen11_bpc_constraint(data->drm_fd, data->output, data->input_bpc))
> continue;
>
> - if (!check_big_joiner_pipe_constraint(data))
> + if (!pipe_output_combo_valid(data))
> continue;
>
> if (test_type == TEST_DSC_BPC)
> @@ -206,7 +210,6 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
> igt_main
> {
> data_t data = {};
> - int i;
>
> igt_fixture {
> data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
> @@ -217,9 +220,6 @@ igt_main
> igt_display_require(&data.display, data.drm_fd);
> igt_display_require_output(&data.display);
> igt_require(data.disp_ver >= 11);
> - data.n_pipes = 0;
> - for_each_pipe(&data.display, i)
> - data.n_pipes++;
> }
>
> igt_describe("Tests basic display stream compression functionality if supported "
> diff --git a/tests/i915/kms_dsc_helper.h b/tests/i915/kms_dsc_helper.h
> index fe479dac472..b3828dcd44a 100644
> --- a/tests/i915/kms_dsc_helper.h
> +++ b/tests/i915/kms_dsc_helper.h
> @@ -21,8 +21,6 @@
> #include <fcntl.h>
> #include <termios.h>
>
> -#define HDISPLAY_5K 5120
> -
> void force_dsc_enable(int drmfd, igt_output_t *output);
> void force_dsc_enable_bpc(int drmfd, igt_output_t *output, int input_bpc);
> void save_force_dsc_en(int drmfd, igt_output_t *output);
^ permalink raw reply [flat|nested] 10+ messages in thread
* [igt-dev] ✓ Fi.CI.BAT: success for Fix Bigjoiner checks (rev5)
2023-04-14 8:36 [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks Bhanuprakash Modem
` (5 preceding siblings ...)
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 6/6] tests/kms_setmode: " Bhanuprakash Modem
@ 2023-04-14 11:39 ` Patchwork
2023-04-14 15:05 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
7 siblings, 0 replies; 10+ messages in thread
From: Patchwork @ 2023-04-14 11:39 UTC (permalink / raw)
To: Bhanuprakash Modem; +Cc: igt-dev
[-- Attachment #1: Type: text/plain, Size: 4698 bytes --]
== Series Details ==
Series: Fix Bigjoiner checks (rev5)
URL : https://patchwork.freedesktop.org/series/115712/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13006 -> IGTPW_8804
====================================================
Summary
-------
**WARNING**
Minor unknown changes coming with IGTPW_8804 need to be verified
manually.
If you think the reported changes have nothing to do with the changes
introduced in IGTPW_8804, please notify your bug team to allow them
to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/index.html
Participating hosts (37 -> 36)
------------------------------
Missing (1): fi-snb-2520m
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_8804:
### IGT changes ###
#### Warnings ####
* igt@kms_flip@basic-plain-flip:
- bat-atsm-1: [SKIP][1] ([i915#6166]) -> [FAIL][2] +3 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/bat-atsm-1/igt@kms_flip@basic-plain-flip.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/bat-atsm-1/igt@kms_flip@basic-plain-flip.html
Known issues
------------
Here are the changes found in IGTPW_8804 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s3@smem:
- bat-rpls-1: NOTRUN -> [ABORT][3] ([i915#6687] / [i915#7978])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/bat-rpls-1/igt@gem_exec_suspend@basic-s3@smem.html
* igt@i915_pm_rps@basic-api:
- bat-dg2-11: [PASS][4] -> [FAIL][5] ([i915#8308])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/bat-dg2-11/igt@i915_pm_rps@basic-api.html
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/bat-dg2-11/igt@i915_pm_rps@basic-api.html
* igt@i915_selftest@live@gt_lrc:
- bat-adln-1: [PASS][6] -> [INCOMPLETE][7] ([i915#4983] / [i915#7609])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/bat-adln-1/igt@i915_selftest@live@gt_lrc.html
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/bat-adln-1/igt@i915_selftest@live@gt_lrc.html
* igt@i915_selftest@live@slpc:
- bat-rpls-1: NOTRUN -> [DMESG-FAIL][8] ([i915#6367])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/bat-rpls-1/igt@i915_selftest@live@slpc.html
* igt@kms_pipe_crc_basic@read-crc:
- bat-dg2-11: NOTRUN -> [SKIP][9] ([i915#5354])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/bat-dg2-11/igt@kms_pipe_crc_basic@read-crc.html
#### Possible fixes ####
* igt@i915_selftest@live@reset:
- bat-rpls-1: [ABORT][10] ([i915#4983]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/bat-rpls-1/igt@i915_selftest@live@reset.html
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/bat-rpls-1/igt@i915_selftest@live@reset.html
* igt@i915_suspend@basic-s3-without-i915:
- {bat-kbl-2}: [INCOMPLETE][12] ([i915#4817]) -> [PASS][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/bat-kbl-2/igt@i915_suspend@basic-s3-without-i915.html
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/bat-kbl-2/igt@i915_suspend@basic-s3-without-i915.html
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#4817]: https://gitlab.freedesktop.org/drm/intel/issues/4817
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#5354]: https://gitlab.freedesktop.org/drm/intel/issues/5354
[i915#6166]: https://gitlab.freedesktop.org/drm/intel/issues/6166
[i915#6367]: https://gitlab.freedesktop.org/drm/intel/issues/6367
[i915#6687]: https://gitlab.freedesktop.org/drm/intel/issues/6687
[i915#7609]: https://gitlab.freedesktop.org/drm/intel/issues/7609
[i915#7978]: https://gitlab.freedesktop.org/drm/intel/issues/7978
[i915#8308]: https://gitlab.freedesktop.org/drm/intel/issues/8308
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_7254 -> IGTPW_8804
CI-20190529: 20190529
CI_DRM_13006: 24274f6f20ef82b4e14e106b68922152794de8b5 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8804: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/index.html
IGT_7254: 7fab01340a3f360abacd7914015be1ad485363d7 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/index.html
[-- Attachment #2: Type: text/html, Size: 5504 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* [igt-dev] ✓ Fi.CI.IGT: success for Fix Bigjoiner checks (rev5)
2023-04-14 8:36 [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks Bhanuprakash Modem
` (6 preceding siblings ...)
2023-04-14 11:39 ` [igt-dev] ✓ Fi.CI.BAT: success for Fix Bigjoiner checks (rev5) Patchwork
@ 2023-04-14 15:05 ` Patchwork
7 siblings, 0 replies; 10+ messages in thread
From: Patchwork @ 2023-04-14 15:05 UTC (permalink / raw)
To: Bhanuprakash Modem; +Cc: igt-dev
[-- Attachment #1: Type: text/plain, Size: 17420 bytes --]
== Series Details ==
Series: Fix Bigjoiner checks (rev5)
URL : https://patchwork.freedesktop.org/series/115712/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13006_full -> IGTPW_8804_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/index.html
Participating hosts (7 -> 7)
------------------------------
No changes in participating hosts
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_8804_full:
### IGT changes ###
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses.
They do not affect the overall result.
* igt@kms_big_joiner@2x-modeset:
- {shard-rkl}: [SKIP][1] ([i915#2705]) -> [SKIP][2] +2 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-rkl-2/igt@kms_big_joiner@2x-modeset.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-rkl-2/igt@kms_big_joiner@2x-modeset.html
* igt@kms_big_joiner@invalid-modeset:
- {shard-dg1}: NOTRUN -> [SKIP][3] +1 similar issue
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-dg1-15/igt@kms_big_joiner@invalid-modeset.html
- {shard-tglu}: [SKIP][4] ([i915#2705]) -> [SKIP][5] +2 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-tglu-9/igt@kms_big_joiner@invalid-modeset.html
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-tglu-5/igt@kms_big_joiner@invalid-modeset.html
Known issues
------------
Here are the changes found in IGTPW_8804_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_fair@basic-deadline:
- shard-glk: [PASS][6] -> [FAIL][7] ([i915#2846])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-glk4/igt@gem_exec_fair@basic-deadline.html
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-glk3/igt@gem_exec_fair@basic-deadline.html
* igt@gem_exec_fair@basic-none-solo@rcs0:
- shard-apl: [PASS][8] -> [FAIL][9] ([i915#2842])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-apl6/igt@gem_exec_fair@basic-none-solo@rcs0.html
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl6/igt@gem_exec_fair@basic-none-solo@rcs0.html
* igt@gem_exec_fair@basic-pace@vcs0:
- shard-glk: [PASS][10] -> [FAIL][11] ([i915#2842]) +2 similar issues
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-glk2/igt@gem_exec_fair@basic-pace@vcs0.html
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-glk5/igt@gem_exec_fair@basic-pace@vcs0.html
* igt@gem_lmem_swapping@smem-oom:
- shard-apl: NOTRUN -> [SKIP][12] ([fdo#109271] / [i915#4613])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl1/igt@gem_lmem_swapping@smem-oom.html
* igt@gem_userptr_blits@vma-merge:
- shard-apl: NOTRUN -> [FAIL][13] ([i915#3318])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl2/igt@gem_userptr_blits@vma-merge.html
* igt@kms_ccs@pipe-a-ccs-on-another-bo-y_tiled_gen12_mc_ccs:
- shard-apl: NOTRUN -> [SKIP][14] ([fdo#109271] / [i915#3886]) +2 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl1/igt@kms_ccs@pipe-a-ccs-on-another-bo-y_tiled_gen12_mc_ccs.html
* igt@kms_cursor_legacy@single-move@all-pipes:
- shard-apl: NOTRUN -> [ABORT][15] ([i915#3371] / [i915#8347])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl6/igt@kms_cursor_legacy@single-move@all-pipes.html
* igt@kms_flip@flip-vs-expired-vblank-interruptible@b-hdmi-a1:
- shard-glk: [PASS][16] -> [FAIL][17] ([i915#79])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-glk6/igt@kms_flip@flip-vs-expired-vblank-interruptible@b-hdmi-a1.html
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-glk5/igt@kms_flip@flip-vs-expired-vblank-interruptible@b-hdmi-a1.html
* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area:
- shard-apl: NOTRUN -> [SKIP][18] ([fdo#109271] / [i915#658])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl6/igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area.html
* igt@v3d/v3d_perfmon@destroy-valid-perfmon:
- shard-apl: NOTRUN -> [SKIP][19] ([fdo#109271]) +71 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl3/igt@v3d/v3d_perfmon@destroy-valid-perfmon.html
* igt@v3d/v3d_submit_cl@bad-multisync-extension:
- shard-snb: NOTRUN -> [SKIP][20] ([fdo#109271]) +14 similar issues
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-snb2/igt@v3d/v3d_submit_cl@bad-multisync-extension.html
#### Possible fixes ####
* igt@gem_barrier_race@remote-request@rcs0:
- shard-apl: [ABORT][21] ([i915#8211] / [i915#8234]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-apl3/igt@gem_barrier_race@remote-request@rcs0.html
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl6/igt@gem_barrier_race@remote-request@rcs0.html
* igt@gem_exec_fair@basic-pace-solo@rcs0:
- shard-apl: [FAIL][23] ([i915#2842]) -> [PASS][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-apl3/igt@gem_exec_fair@basic-pace-solo@rcs0.html
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl3/igt@gem_exec_fair@basic-pace-solo@rcs0.html
* igt@gen9_exec_parse@allowed-single:
- shard-apl: [ABORT][25] ([i915#5566]) -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-apl2/igt@gen9_exec_parse@allowed-single.html
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl6/igt@gen9_exec_parse@allowed-single.html
* igt@i915_module_load@reload:
- shard-snb: [ABORT][27] ([i915#4528]) -> [PASS][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-snb4/igt@i915_module_load@reload.html
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-snb7/igt@i915_module_load@reload.html
* igt@i915_pm_rpm@modeset-lpsp-stress-no-wait:
- {shard-rkl}: [SKIP][29] ([i915#1397]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-rkl-1/igt@i915_pm_rpm@modeset-lpsp-stress-no-wait.html
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-rkl-7/igt@i915_pm_rpm@modeset-lpsp-stress-no-wait.html
* igt@i915_selftest@live@dmabuf:
- shard-apl: [DMESG-FAIL][31] ([i915#7562]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-apl6/igt@i915_selftest@live@dmabuf.html
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl2/igt@i915_selftest@live@dmabuf.html
* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size:
- shard-apl: [FAIL][33] ([i915#2346]) -> [PASS][34] +1 similar issue
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-apl1/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-apl3/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html
* igt@kms_cursor_legacy@forked-move@pipe-b:
- {shard-rkl}: [INCOMPLETE][35] ([i915#8011]) -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13006/shard-rkl-7/igt@kms_cursor_legacy@forked-move@pipe-b.html
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/shard-rkl-3/igt@kms_cursor_legacy@forked-move@pipe-b.html
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[IGT#2]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/issues/2
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109300]: https://bugs.freedesktop.org/show_bug.cgi?id=109300
[fdo#109303]: https://bugs.freedesktop.org/show_bug.cgi?id=109303
[fdo#109307]: https://bugs.freedesktop.org/show_bug.cgi?id=109307
[fdo#109314]: https://bugs.freedesktop.org/show_bug.cgi?id=109314
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#110723]: https://bugs.freedesktop.org/show_bug.cgi?id=110723
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111614]: https://bugs.freedesktop.org/show_bug.cgi?id=111614
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[fdo#112054]: https://bugs.freedesktop.org/show_bug.cgi?id=112054
[fdo#112283]: https://bugs.freedesktop.org/show_bug.cgi?id=112283
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1257]: https://gitlab.freedesktop.org/drm/intel/issues/1257
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#1825]: https://gitlab.freedesktop.org/drm/intel/issues/1825
[i915#1902]: https://gitlab.freedesktop.org/drm/intel/issues/1902
[i915#1937]: https://gitlab.freedesktop.org/drm/intel/issues/1937
[i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
[i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
[i915#2527]: https://gitlab.freedesktop.org/drm/intel/issues/2527
[i915#2575]: https://gitlab.freedesktop.org/drm/intel/issues/2575
[i915#2587]: https://gitlab.freedesktop.org/drm/intel/issues/2587
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2681]: https://gitlab.freedesktop.org/drm/intel/issues/2681
[i915#2705]: https://gitlab.freedesktop.org/drm/intel/issues/2705
[i915#280]: https://gitlab.freedesktop.org/drm/intel/issues/280
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#2846]: https://gitlab.freedesktop.org/drm/intel/issues/2846
[i915#2856]: https://gitlab.freedesktop.org/drm/intel/issues/2856
[i915#3023]: https://gitlab.freedesktop.org/drm/intel/issues/3023
[i915#3281]: https://gitlab.freedesktop.org/drm/intel/issues/3281
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#3297]: https://gitlab.freedesktop.org/drm/intel/issues/3297
[i915#3299]: https://gitlab.freedesktop.org/drm/intel/issues/3299
[i915#3318]: https://gitlab.freedesktop.org/drm/intel/issues/3318
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#3371]: https://gitlab.freedesktop.org/drm/intel/issues/3371
[i915#3458]: https://gitlab.freedesktop.org/drm/intel/issues/3458
[i915#3539]: https://gitlab.freedesktop.org/drm/intel/issues/3539
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3591]: https://gitlab.freedesktop.org/drm/intel/issues/3591
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3638]: https://gitlab.freedesktop.org/drm/intel/issues/3638
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#3734]: https://gitlab.freedesktop.org/drm/intel/issues/3734
[i915#3742]: https://gitlab.freedesktop.org/drm/intel/issues/3742
[i915#3840]: https://gitlab.freedesktop.org/drm/intel/issues/3840
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#3938]: https://gitlab.freedesktop.org/drm/intel/issues/3938
[i915#3952]: https://gitlab.freedesktop.org/drm/intel/issues/3952
[i915#3989]: https://gitlab.freedesktop.org/drm/intel/issues/3989
[i915#4070]: https://gitlab.freedesktop.org/drm/intel/issues/4070
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4098]: https://gitlab.freedesktop.org/drm/intel/issues/4098
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4349]: https://gitlab.freedesktop.org/drm/intel/issues/4349
[i915#4387]: https://gitlab.freedesktop.org/drm/intel/issues/4387
[i915#4528]: https://gitlab.freedesktop.org/drm/intel/issues/4528
[i915#4538]: https://gitlab.freedesktop.org/drm/intel/issues/4538
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#4565]: https://gitlab.freedesktop.org/drm/intel/issues/4565
[i915#4579]: https://gitlab.freedesktop.org/drm/intel/issues/4579
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4771]: https://gitlab.freedesktop.org/drm/intel/issues/4771
[i915#4812]: https://gitlab.freedesktop.org/drm/intel/issues/4812
[i915#4818]: https://gitlab.freedesktop.org/drm/intel/issues/4818
[i915#4833]: https://gitlab.freedesktop.org/drm/intel/issues/4833
[i915#4852]: https://gitlab.freedesktop.org/drm/intel/issues/4852
[i915#4859]: https://gitlab.freedesktop.org/drm/intel/issues/4859
[i915#4860]: https://gitlab.freedesktop.org/drm/intel/issues/4860
[i915#4880]: https://gitlab.freedesktop.org/drm/intel/issues/4880
[i915#4884]: https://gitlab.freedesktop.org/drm/intel/issues/4884
[i915#4936]: https://gitlab.freedesktop.org/drm/intel/issues/4936
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5235]: https://gitlab.freedesktop.org/drm/intel/issues/5235
[i915#5286]: https://gitlab.freedesktop.org/drm/intel/issues/5286
[i915#5288]: https://gitlab.freedesktop.org/drm/intel/issues/5288
[i915#5289]: https://gitlab.freedesktop.org/drm/intel/issues/5289
[i915#5325]: https://gitlab.freedesktop.org/drm/intel/issues/5325
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
[i915#5354]: https://gitlab.freedesktop.org/drm/intel/issues/5354
[i915#5461]: https://gitlab.freedesktop.org/drm/intel/issues/5461
[i915#5493]: https://gitlab.freedesktop.org/drm/intel/issues/5493
[i915#5563]: https://gitlab.freedesktop.org/drm/intel/issues/5563
[i915#5566]: https://gitlab.freedesktop.org/drm/intel/issues/5566
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6268]: https://gitlab.freedesktop.org/drm/intel/issues/6268
[i915#6301]: https://gitlab.freedesktop.org/drm/intel/issues/6301
[i915#6493]: https://gitlab.freedesktop.org/drm/intel/issues/6493
[i915#6524]: https://gitlab.freedesktop.org/drm/intel/issues/6524
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6590]: https://gitlab.freedesktop.org/drm/intel/issues/6590
[i915#6768]: https://gitlab.freedesktop.org/drm/intel/issues/6768
[i915#6944]: https://gitlab.freedesktop.org/drm/intel/issues/6944
[i915#6946]: https://gitlab.freedesktop.org/drm/intel/issues/6946
[i915#7116]: https://gitlab.freedesktop.org/drm/intel/issues/7116
[i915#7118]: https://gitlab.freedesktop.org/drm/intel/issues/7118
[i915#7561]: https://gitlab.freedesktop.org/drm/intel/issues/7561
[i915#7562]: https://gitlab.freedesktop.org/drm/intel/issues/7562
[i915#7697]: https://gitlab.freedesktop.org/drm/intel/issues/7697
[i915#7701]: https://gitlab.freedesktop.org/drm/intel/issues/7701
[i915#7711]: https://gitlab.freedesktop.org/drm/intel/issues/7711
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#8011]: https://gitlab.freedesktop.org/drm/intel/issues/8011
[i915#8155]: https://gitlab.freedesktop.org/drm/intel/issues/8155
[i915#8211]: https://gitlab.freedesktop.org/drm/intel/issues/8211
[i915#8234]: https://gitlab.freedesktop.org/drm/intel/issues/8234
[i915#8253]: https://gitlab.freedesktop.org/drm/intel/issues/8253
[i915#8308]: https://gitlab.freedesktop.org/drm/intel/issues/8308
[i915#8311]: https://gitlab.freedesktop.org/drm/intel/issues/8311
[i915#8347]: https://gitlab.freedesktop.org/drm/intel/issues/8347
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_7254 -> IGTPW_8804
* Piglit: piglit_4509 -> None
CI-20190529: 20190529
CI_DRM_13006: 24274f6f20ef82b4e14e106b68922152794de8b5 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8804: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/index.html
IGT_7254: 7fab01340a3f360abacd7914015be1ad485363d7 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8804/index.html
[-- Attachment #2: Type: text/html, Size: 11513 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2023-04-14 15:05 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-04-14 8:36 [igt-dev] [i-g-t V3 0/6] Fix Bigjoiner checks Bhanuprakash Modem
2023-04-14 8:36 ` [igt-dev] [i-g-t V3 1/6] lib/igt_kms: " Bhanuprakash Modem
2023-04-14 8:36 ` [igt-dev] [i-g-t V3 2/6] tests/i915/kms_big_joiner: " Bhanuprakash Modem
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 3/6] tests/i915/kms_dsc: Update bigjoiner pipe constraint Bhanuprakash Modem
2023-04-14 9:53 ` Karthik B S
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 4/6] tests/kms_invalid_mode: Use helpers from IGT lib Bhanuprakash Modem
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 5/6] tests/kms_flip: Fix Bigjoiner checks Bhanuprakash Modem
2023-04-14 8:37 ` [igt-dev] [i-g-t V3 6/6] tests/kms_setmode: " Bhanuprakash Modem
2023-04-14 11:39 ` [igt-dev] ✓ Fi.CI.BAT: success for Fix Bigjoiner checks (rev5) Patchwork
2023-04-14 15:05 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.