All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Sam Ravnborg <sam@ravnborg.org>
Cc: "Lukas F. Hartmann" <lukas@mntre.com>,
	Nicolas Belin <nbelin@baylibre.com>,
	linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-phy@lists.infradead.org,
	Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v5 09/17] drm/meson: only use components with dw-hdmi
Date: Tue, 30 May 2023 09:38:10 +0200	[thread overview]
Message-ID: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-9-56eb7a4d5b8e@linaro.org> (raw)
In-Reply-To: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org>

Only DW-HDMI currently needs components since it reuses
the drm-meson driver context to access HHI registers (sic).

Once this is solved, we can get rid on components.

Until now, limit the components matching to the dw-hdmi compatibles
we know to require this hack, for other bridges simply use probe defer
instead and get over this components sitation.

The back story is that we simply cannot attach DSI adapters bridges
if we use components, only DSI panels, this is because we bind/unbind
the DSI controller at each drm-meson driver master bind tentative.
With this the I2C DSI bridge is unable to find the DSI controller
host and everything fails to probe.

This will simplify a lot adding new or older HDMI bridges.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/gpu/drm/meson/meson_drv.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index e060279dc80a..e935c0286a20 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -451,10 +451,17 @@ static void meson_drv_shutdown(struct platform_device *pdev)
 	drm_atomic_helper_shutdown(priv->drm);
 }
 
-/* Possible connectors nodes to ignore */
-static const struct of_device_id connectors_match[] = {
-	{ .compatible = "composite-video-connector" },
-	{ .compatible = "svideo-connector" },
+/*
+ * Only devices to use as components
+ * TOFIX: get rid of components when we can finally
+ * get meson_dx_hdmi to stop using the meson_drm
+ * private structure for HHI registers.
+ */
+static const struct of_device_id components_dev_match[] = {
+	{ .compatible = "amlogic,meson-gxbb-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxl-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxm-dw-hdmi" },
+	{ .compatible = "amlogic,meson-g12a-dw-hdmi" },
 	{}
 };
 
@@ -472,17 +479,12 @@ static int meson_drv_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		/* If an analog connector is detected, count it as an output */
-		if (of_match_node(connectors_match, remote)) {
-			++count;
-			of_node_put(remote);
-			continue;
-		}
-
-		dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
-			np, remote, dev_name(&pdev->dev));
+		if (of_match_node(components_dev_match, remote)) {
+			component_match_add(&pdev->dev, &match, component_compare_of, remote);
 
-		component_match_add(&pdev->dev, &match, component_compare_of, remote);
+			dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
+				np, remote, dev_name(&pdev->dev));
+		}
 
 		of_node_put(remote);
 

-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>,
	Kevin Hilman <khilman@baylibre.com>,
	 Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	 Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	David Airlie <airlied@gmail.com>,
	 Daniel Vetter <daniel@ffwll.ch>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	 Kishon Vijay Abraham I <kishon@kernel.org>,
	Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org,
	Neil Armstrong <neil.armstrong@linaro.org>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Nicolas Belin <nbelin@baylibre.com>,
	linux-phy@lists.infradead.org, linux-amlogic@lists.infradead.org,
	"Lukas F. Hartmann" <lukas@mntre.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 09/17] drm/meson: only use components with dw-hdmi
Date: Tue, 30 May 2023 09:38:10 +0200	[thread overview]
Message-ID: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-9-56eb7a4d5b8e@linaro.org> (raw)
In-Reply-To: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org>

Only DW-HDMI currently needs components since it reuses
the drm-meson driver context to access HHI registers (sic).

Once this is solved, we can get rid on components.

Until now, limit the components matching to the dw-hdmi compatibles
we know to require this hack, for other bridges simply use probe defer
instead and get over this components sitation.

The back story is that we simply cannot attach DSI adapters bridges
if we use components, only DSI panels, this is because we bind/unbind
the DSI controller at each drm-meson driver master bind tentative.
With this the I2C DSI bridge is unable to find the DSI controller
host and everything fails to probe.

This will simplify a lot adding new or older HDMI bridges.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/gpu/drm/meson/meson_drv.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index e060279dc80a..e935c0286a20 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -451,10 +451,17 @@ static void meson_drv_shutdown(struct platform_device *pdev)
 	drm_atomic_helper_shutdown(priv->drm);
 }
 
-/* Possible connectors nodes to ignore */
-static const struct of_device_id connectors_match[] = {
-	{ .compatible = "composite-video-connector" },
-	{ .compatible = "svideo-connector" },
+/*
+ * Only devices to use as components
+ * TOFIX: get rid of components when we can finally
+ * get meson_dx_hdmi to stop using the meson_drm
+ * private structure for HHI registers.
+ */
+static const struct of_device_id components_dev_match[] = {
+	{ .compatible = "amlogic,meson-gxbb-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxl-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxm-dw-hdmi" },
+	{ .compatible = "amlogic,meson-g12a-dw-hdmi" },
 	{}
 };
 
@@ -472,17 +479,12 @@ static int meson_drv_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		/* If an analog connector is detected, count it as an output */
-		if (of_match_node(connectors_match, remote)) {
-			++count;
-			of_node_put(remote);
-			continue;
-		}
-
-		dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
-			np, remote, dev_name(&pdev->dev));
+		if (of_match_node(components_dev_match, remote)) {
+			component_match_add(&pdev->dev, &match, component_compare_of, remote);
 
-		component_match_add(&pdev->dev, &match, component_compare_of, remote);
+			dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
+				np, remote, dev_name(&pdev->dev));
+		}
 
 		of_node_put(remote);
 

-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>,
	Kevin Hilman <khilman@baylibre.com>,
	 Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	 Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	David Airlie <airlied@gmail.com>,
	 Daniel Vetter <daniel@ffwll.ch>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	 Kishon Vijay Abraham I <kishon@kernel.org>,
	Sam Ravnborg <sam@ravnborg.org>
Cc: "Lukas F. Hartmann" <lukas@mntre.com>,
	 Nicolas Belin <nbelin@baylibre.com>,
	linux-amlogic@lists.infradead.org,  linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	 dri-devel@lists.freedesktop.org, linux-phy@lists.infradead.org,
	 Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v5 09/17] drm/meson: only use components with dw-hdmi
Date: Tue, 30 May 2023 09:38:10 +0200	[thread overview]
Message-ID: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-9-56eb7a4d5b8e@linaro.org> (raw)
In-Reply-To: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org>

Only DW-HDMI currently needs components since it reuses
the drm-meson driver context to access HHI registers (sic).

Once this is solved, we can get rid on components.

Until now, limit the components matching to the dw-hdmi compatibles
we know to require this hack, for other bridges simply use probe defer
instead and get over this components sitation.

The back story is that we simply cannot attach DSI adapters bridges
if we use components, only DSI panels, this is because we bind/unbind
the DSI controller at each drm-meson driver master bind tentative.
With this the I2C DSI bridge is unable to find the DSI controller
host and everything fails to probe.

This will simplify a lot adding new or older HDMI bridges.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/gpu/drm/meson/meson_drv.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index e060279dc80a..e935c0286a20 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -451,10 +451,17 @@ static void meson_drv_shutdown(struct platform_device *pdev)
 	drm_atomic_helper_shutdown(priv->drm);
 }
 
-/* Possible connectors nodes to ignore */
-static const struct of_device_id connectors_match[] = {
-	{ .compatible = "composite-video-connector" },
-	{ .compatible = "svideo-connector" },
+/*
+ * Only devices to use as components
+ * TOFIX: get rid of components when we can finally
+ * get meson_dx_hdmi to stop using the meson_drm
+ * private structure for HHI registers.
+ */
+static const struct of_device_id components_dev_match[] = {
+	{ .compatible = "amlogic,meson-gxbb-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxl-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxm-dw-hdmi" },
+	{ .compatible = "amlogic,meson-g12a-dw-hdmi" },
 	{}
 };
 
@@ -472,17 +479,12 @@ static int meson_drv_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		/* If an analog connector is detected, count it as an output */
-		if (of_match_node(connectors_match, remote)) {
-			++count;
-			of_node_put(remote);
-			continue;
-		}
-
-		dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
-			np, remote, dev_name(&pdev->dev));
+		if (of_match_node(components_dev_match, remote)) {
+			component_match_add(&pdev->dev, &match, component_compare_of, remote);
 
-		component_match_add(&pdev->dev, &match, component_compare_of, remote);
+			dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
+				np, remote, dev_name(&pdev->dev));
+		}
 
 		of_node_put(remote);
 

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>,
	Kevin Hilman <khilman@baylibre.com>,
	 Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	 Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	David Airlie <airlied@gmail.com>,
	 Daniel Vetter <daniel@ffwll.ch>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	 Kishon Vijay Abraham I <kishon@kernel.org>,
	Sam Ravnborg <sam@ravnborg.org>
Cc: "Lukas F. Hartmann" <lukas@mntre.com>,
	 Nicolas Belin <nbelin@baylibre.com>,
	linux-amlogic@lists.infradead.org,  linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	 dri-devel@lists.freedesktop.org, linux-phy@lists.infradead.org,
	 Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v5 09/17] drm/meson: only use components with dw-hdmi
Date: Tue, 30 May 2023 09:38:10 +0200	[thread overview]
Message-ID: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-9-56eb7a4d5b8e@linaro.org> (raw)
In-Reply-To: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org>

Only DW-HDMI currently needs components since it reuses
the drm-meson driver context to access HHI registers (sic).

Once this is solved, we can get rid on components.

Until now, limit the components matching to the dw-hdmi compatibles
we know to require this hack, for other bridges simply use probe defer
instead and get over this components sitation.

The back story is that we simply cannot attach DSI adapters bridges
if we use components, only DSI panels, this is because we bind/unbind
the DSI controller at each drm-meson driver master bind tentative.
With this the I2C DSI bridge is unable to find the DSI controller
host and everything fails to probe.

This will simplify a lot adding new or older HDMI bridges.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/gpu/drm/meson/meson_drv.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index e060279dc80a..e935c0286a20 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -451,10 +451,17 @@ static void meson_drv_shutdown(struct platform_device *pdev)
 	drm_atomic_helper_shutdown(priv->drm);
 }
 
-/* Possible connectors nodes to ignore */
-static const struct of_device_id connectors_match[] = {
-	{ .compatible = "composite-video-connector" },
-	{ .compatible = "svideo-connector" },
+/*
+ * Only devices to use as components
+ * TOFIX: get rid of components when we can finally
+ * get meson_dx_hdmi to stop using the meson_drm
+ * private structure for HHI registers.
+ */
+static const struct of_device_id components_dev_match[] = {
+	{ .compatible = "amlogic,meson-gxbb-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxl-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxm-dw-hdmi" },
+	{ .compatible = "amlogic,meson-g12a-dw-hdmi" },
 	{}
 };
 
@@ -472,17 +479,12 @@ static int meson_drv_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		/* If an analog connector is detected, count it as an output */
-		if (of_match_node(connectors_match, remote)) {
-			++count;
-			of_node_put(remote);
-			continue;
-		}
-
-		dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
-			np, remote, dev_name(&pdev->dev));
+		if (of_match_node(components_dev_match, remote)) {
+			component_match_add(&pdev->dev, &match, component_compare_of, remote);
 
-		component_match_add(&pdev->dev, &match, component_compare_of, remote);
+			dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
+				np, remote, dev_name(&pdev->dev));
+		}
 
 		of_node_put(remote);
 

-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>,
	Kevin Hilman <khilman@baylibre.com>,
	 Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	 Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	David Airlie <airlied@gmail.com>,
	 Daniel Vetter <daniel@ffwll.ch>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	 Kishon Vijay Abraham I <kishon@kernel.org>,
	Sam Ravnborg <sam@ravnborg.org>
Cc: "Lukas F. Hartmann" <lukas@mntre.com>,
	 Nicolas Belin <nbelin@baylibre.com>,
	linux-amlogic@lists.infradead.org,  linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	 dri-devel@lists.freedesktop.org, linux-phy@lists.infradead.org,
	 Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v5 09/17] drm/meson: only use components with dw-hdmi
Date: Tue, 30 May 2023 09:38:10 +0200	[thread overview]
Message-ID: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-9-56eb7a4d5b8e@linaro.org> (raw)
In-Reply-To: <20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org>

Only DW-HDMI currently needs components since it reuses
the drm-meson driver context to access HHI registers (sic).

Once this is solved, we can get rid on components.

Until now, limit the components matching to the dw-hdmi compatibles
we know to require this hack, for other bridges simply use probe defer
instead and get over this components sitation.

The back story is that we simply cannot attach DSI adapters bridges
if we use components, only DSI panels, this is because we bind/unbind
the DSI controller at each drm-meson driver master bind tentative.
With this the I2C DSI bridge is unable to find the DSI controller
host and everything fails to probe.

This will simplify a lot adding new or older HDMI bridges.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/gpu/drm/meson/meson_drv.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index e060279dc80a..e935c0286a20 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -451,10 +451,17 @@ static void meson_drv_shutdown(struct platform_device *pdev)
 	drm_atomic_helper_shutdown(priv->drm);
 }
 
-/* Possible connectors nodes to ignore */
-static const struct of_device_id connectors_match[] = {
-	{ .compatible = "composite-video-connector" },
-	{ .compatible = "svideo-connector" },
+/*
+ * Only devices to use as components
+ * TOFIX: get rid of components when we can finally
+ * get meson_dx_hdmi to stop using the meson_drm
+ * private structure for HHI registers.
+ */
+static const struct of_device_id components_dev_match[] = {
+	{ .compatible = "amlogic,meson-gxbb-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxl-dw-hdmi" },
+	{ .compatible = "amlogic,meson-gxm-dw-hdmi" },
+	{ .compatible = "amlogic,meson-g12a-dw-hdmi" },
 	{}
 };
 
@@ -472,17 +479,12 @@ static int meson_drv_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		/* If an analog connector is detected, count it as an output */
-		if (of_match_node(connectors_match, remote)) {
-			++count;
-			of_node_put(remote);
-			continue;
-		}
-
-		dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
-			np, remote, dev_name(&pdev->dev));
+		if (of_match_node(components_dev_match, remote)) {
+			component_match_add(&pdev->dev, &match, component_compare_of, remote);
 
-		component_match_add(&pdev->dev, &match, component_compare_of, remote);
+			dev_dbg(&pdev->dev, "parent %pOF remote match add %pOF parent %s\n",
+				np, remote, dev_name(&pdev->dev));
+		}
 
 		of_node_put(remote);
 

-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2023-05-30  7:39 UTC|newest]

Thread overview: 170+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-30  7:38 [PATCH v5 00/17] drm/meson: add support for MIPI DSI Display Neil Armstrong
2023-05-30  7:38 ` Neil Armstrong
2023-05-30  7:38 ` Neil Armstrong
2023-05-30  7:38 ` Neil Armstrong
2023-05-30  7:38 ` Neil Armstrong
2023-05-30  7:38 ` [PATCH v5 01/17] clk: meson: g12a: prefix private CLK IDs defines with PRIV Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  8:08   ` Jerome Brunet
2023-05-30  8:08     ` Jerome Brunet
2023-05-30  8:08     ` Jerome Brunet
2023-05-30  8:08     ` Jerome Brunet
2023-05-30  8:08     ` Jerome Brunet
2023-05-30 15:56     ` Neil Armstrong
2023-05-30 15:56       ` Neil Armstrong
2023-05-30 15:56       ` Neil Armstrong
2023-05-30 15:56       ` Neil Armstrong
2023-05-30 15:56       ` Neil Armstrong
2023-05-31 16:08       ` Jerome Brunet
2023-05-31 16:08         ` Jerome Brunet
2023-05-31 16:08         ` Jerome Brunet
2023-05-31 16:08         ` Jerome Brunet
2023-05-31 16:08         ` Jerome Brunet
2023-05-30  7:38 ` [PATCH v5 02/17] clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38 ` [PATCH v5 03/17] dt-bindings: clk: g12a-clkc: add VCLK2_SEL and CTS_ENCL clock ids Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30 17:25   ` Conor Dooley
2023-05-30 17:25     ` Conor Dooley
2023-05-30 17:25     ` Conor Dooley
2023-05-30 17:25     ` Conor Dooley
2023-05-30 17:25     ` Conor Dooley
2023-05-30  7:38 ` [PATCH v5 04/17] clk: meson: g12: use VCLK2_SEL, CTS_ENCL & CTS_ENCL_SEL public CLK IDs Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38 ` [PATCH v5 05/17] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  8:14   ` Jerome Brunet
2023-05-30  8:14     ` Jerome Brunet
2023-05-30  8:14     ` Jerome Brunet
2023-05-30  8:14     ` Jerome Brunet
2023-05-30  8:14     ` Jerome Brunet
2023-05-30 15:57     ` Neil Armstrong
2023-05-30 15:57       ` Neil Armstrong
2023-05-30 15:57       ` Neil Armstrong
2023-05-30 15:57       ` Neil Armstrong
2023-05-30 15:57       ` Neil Armstrong
2023-05-30 19:36       ` Martin Blumenstingl
2023-05-30 19:36         ` Martin Blumenstingl
2023-05-30 19:36         ` Martin Blumenstingl
2023-05-30 19:36         ` Martin Blumenstingl
2023-05-30 19:36         ` Martin Blumenstingl
2023-05-30  7:38 ` [PATCH v5 06/17] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30 17:28   ` Conor Dooley
2023-05-30 17:28     ` Conor Dooley
2023-05-30 17:28     ` Conor Dooley
2023-05-30 17:28     ` Conor Dooley
2023-05-30 17:28     ` Conor Dooley
2023-05-30  7:38 ` [PATCH v5 07/17] dt-bindings: display: meson-vpu: add third DPI output port Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38 ` [PATCH v5 08/17] drm/meson: fix unbind path if HDMI fails to bind Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-31  9:19   ` Nicolas Belin
2023-05-31  9:19     ` Nicolas Belin
2023-05-31  9:19     ` Nicolas Belin
2023-05-31  9:19     ` Nicolas Belin
2023-05-31  9:19     ` Nicolas Belin
2023-05-30  7:38 ` Neil Armstrong [this message]
2023-05-30  7:38   ` [PATCH v5 09/17] drm/meson: only use components with dw-hdmi Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-31  9:21   ` Nicolas Belin
2023-05-31  9:21     ` Nicolas Belin
2023-05-31  9:21     ` Nicolas Belin
2023-05-31  9:21     ` Nicolas Belin
2023-05-31  9:21     ` Nicolas Belin
2023-05-30  7:38 ` [PATCH v5 10/17] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-31  9:21   ` Nicolas Belin
2023-05-31  9:21     ` Nicolas Belin
2023-05-31  9:21     ` Nicolas Belin
2023-05-31  9:21     ` Nicolas Belin
2023-05-31  9:21     ` Nicolas Belin
2023-05-30  7:38 ` [PATCH v5 11/17] drm/meson: add DSI encoder Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-31  9:22   ` Nicolas Belin
2023-05-31  9:22     ` Nicolas Belin
2023-05-31  9:22     ` Nicolas Belin
2023-05-31  9:22     ` Nicolas Belin
2023-05-31  9:22     ` Nicolas Belin
2023-05-30  7:38 ` [PATCH v5 12/17] drm/meson: add support for MIPI-DSI transceiver Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-31  9:22   ` Nicolas Belin
2023-05-31  9:22     ` Nicolas Belin
2023-05-31  9:22     ` Nicolas Belin
2023-05-31  9:22     ` Nicolas Belin
2023-05-31  9:22     ` Nicolas Belin
2023-05-30  7:38 ` [PATCH v5 13/17] drm/panel: khadas-ts050: update timings to achieve 60Hz refresh rate Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-31  9:23   ` Nicolas Belin
2023-05-31  9:23     ` Nicolas Belin
2023-05-31  9:23     ` Nicolas Belin
2023-05-31  9:23     ` Nicolas Belin
2023-05-31  9:23     ` Nicolas Belin
2023-05-30  7:38 ` [PATCH v5 14/17] arm64: meson: g12-common: add the MIPI DSI nodes Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38 ` [PATCH v5 15/17] DONOTMERGE: arm64: meson: khadas-vim3l: add DSI panel Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38 ` [PATCH v5 16/17] dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30 17:23   ` Conor Dooley
2023-05-30 17:23     ` Conor Dooley
2023-05-30 17:23     ` Conor Dooley
2023-05-30 17:23     ` Conor Dooley
2023-05-30 17:23     ` Conor Dooley
2023-05-30  7:38 ` [PATCH v5 17/17] arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-05-30  7:38   ` Neil Armstrong
2023-06-01 14:12 ` (subset) [PATCH v5 00/17] drm/meson: add support for MIPI DSI Display Neil Armstrong
2023-06-01 14:12   ` Neil Armstrong
2023-06-01 14:12   ` Neil Armstrong
2023-06-01 14:12   ` Neil Armstrong
2023-06-01 14:12   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-9-56eb7a4d5b8e@linaro.org \
    --to=neil.armstrong@linaro.org \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=kishon@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lukas@mntre.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=nbelin@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.