All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>,
	<mturquette@baylibre.com>, <sboyd@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<khilman@baylibre.com>, <martin.blumenstingl@googlemail.com>
Cc: <jian.hu@amlogic.com>, <kernel@sberdevices.ru>,
	<rockosov@gmail.com>, <linux-amlogic@lists.infradead.org>,
	<linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Dmitry Rokosov <ddrokosov@sberdevices.ru>
Subject: [PATCH v15 6/6] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver
Date: Wed, 17 May 2023 16:33:09 +0300	[thread overview]
Message-ID: <20230517133309.9874-7-ddrokosov@sberdevices.ru> (raw)
In-Reply-To: <20230517133309.9874-1-ddrokosov@sberdevices.ru>

Introduce Peripherals clock controller for Amlogic A1 SoC family.

A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU,
and Audio.
This patchset adds support for Amlogic A1 Peripherals clock driver and
allows to generate clocks for all A1 SoC peripheral IPs.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
---
 drivers/clk/meson/Kconfig          |   10 +
 drivers/clk/meson/Makefile         |    1 +
 drivers/clk/meson/a1-peripherals.c | 2273 ++++++++++++++++++++++++++++
 drivers/clk/meson/a1-peripherals.h |  113 ++
 4 files changed, 2397 insertions(+)
 create mode 100644 drivers/clk/meson/a1-peripherals.c
 create mode 100644 drivers/clk/meson/a1-peripherals.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 693c4cf60f27..8ce846fdbe43 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -109,6 +109,16 @@ config COMMON_CLK_A1_PLL
 	  device, A1 SoC Family. Say Y if you want A1 PLL clock controller
 	  to work.
 
+config COMMON_CLK_A1_PERIPHERALS
+	tristate "Amlogic A1 SoC Peripherals clock controller support"
+	depends on ARM64
+	select COMMON_CLK_MESON_DUALDIV
+	select COMMON_CLK_MESON_REGMAP
+	help
+	  Support for the Peripherals clock controller on Amlogic A113L based
+	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock
+	  controller to work.
+
 config COMMON_CLK_G12A
 	tristate "G12 and SM1 SoC clock controllers support"
 	depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 2f17f475a48f..d5288662881d 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
 obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
 obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
+obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
 obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
 obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c
new file mode 100644
index 000000000000..5e7a37cbbb88
--- /dev/null
+++ b/drivers/clk/meson/a1-peripherals.c
@@ -0,0 +1,2273 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "a1-peripherals.h"
+#include "clk-dualdiv.h"
+#include "clk-regmap.h"
+
+static struct clk_regmap xtal_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "xtal_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fixpll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "fixpll_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_phy_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 2,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_phy_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_ctrl_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 3,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_ctrl_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap hifipll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 4,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hifipll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap syspll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 5,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "syspll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap dds_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dds_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static const struct meson_clk_dualdiv_param clk_32k_div_table[] = {
+	{
+		.dual		= 1,
+		.n1		= 733,
+		.m1		= 8,
+		.n2		= 732,
+		.m2		= 11,
+	},
+	{}
+};
+
+static struct clk_regmap rtc_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_xtal = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL1,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_xtal",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = RTC_CTRL,
+		.mask = 0x3,
+		.shift = 0,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_xtal.hw,
+			&rtc_32k_div.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * All clocks that can be inherited from a more accurate RTC clock are marked
+ * with the CLK_SET_RATE_NO_REPARENT flag. This is because in certain
+ * situations, we may need to freeze their parent. The parent setup of these
+ * clocks should be located on the device tree side.
+ */
+struct clk_regmap rtc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_sys[] = { 0, 1, 2, 3, 7 };
+static const struct clk_parent_data sys_parents[] = {
+	{ .fw_name = "xtal" },
+	{ .fw_name = "fclk_div2" },
+	{ .fw_name = "fclk_div3" },
+	{ .fw_name = "fclk_div5" },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap sys_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a.hw,
+			&sys_b.hw,
+		},
+		.num_parents = 2,
+		/*
+		 * This clock is used by APB bus which is set in boot ROM code
+		 * and is required by the platform to operate correctly.
+		 * Until the following condition are met, we need this clock to
+		 * be marked as critical:
+		 * a) Mark the clock used by a firmware resource, if possible
+		 * b) CCF has a clock hand-off mechanism to make the sure the
+		 *    clock stays on until the proper driver comes along
+		 */
+		.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+	},
+};
+
+static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 };
+static const struct clk_parent_data dsp_ab_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap dspa_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a.hw,
+			&dspa_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a.hw,
+			&dspb_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap clk_24m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "24m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor clk_24m_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "24m_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap clk_12m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 10,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "12m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m_div2.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn_pre = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = CLK12_24_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn_pre",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "fclk_div2",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 12,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&fclk_div2_divn_pre.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver,
+ * the index 4 is the clock measurement source, it's not supported yet
+ */
+static u32 gen_table[] = { 0, 1, 3, 5, 6, 7, 8 };
+static const struct clk_parent_data gen_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &rtc.hw },
+	{ .fw_name = "hifi_pll", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "fclk_div7", },
+};
+
+static struct clk_regmap gen_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = GEN_CLK_CTRL,
+		.mask = 0xf,
+		.shift = 12,
+		.table = gen_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = gen_parent_data,
+		.num_parents = ARRAY_SIZE(gen_parent_data),
+		/*
+		 * The GEN clock can be connected to an external pad, so it
+		 * may be set up directly from the device tree. Additionally,
+		 * the GEN clock can be inherited from a more accurate RTC
+		 * clock, so in certain situations, it may be necessary
+		 * to freeze its parent.
+		 */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap gen_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = GEN_CLK_CTRL,
+		.shift = 0,
+		.width = 11,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gen = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = GEN_CLK_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gen",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .fw_name = "xtal", },
+			{ .hw = &sys.hw, },
+		},
+		.num_parents = 2,
+	},
+};
+
+static struct clk_regmap saradc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "saradc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_abcd_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_c",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_d",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_ef_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div5", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_e_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_e_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_e = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_e",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_f",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * spicc clk
+ *   fdiv2   |\         |\       _____
+ *  ---------| |---DIV--| |     |     |    spicc out
+ *  ---------| |        | |-----|GATE |---------
+ *     ..... |/         | /     |_____|
+ *  --------------------|/
+ *                 24M
+ */
+static const struct clk_parent_data spicc_spifc_parents[] = {
+	{ .fw_name = "fclk_div2"},
+	{ .fw_name = "fclk_div3"},
+	{ .fw_name = "fclk_div5"},
+	{ .fw_name = "hifi_pll" },
+};
+
+static struct clk_regmap spicc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spicc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPICC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spicc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPICC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ts_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = TS_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ts_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ts = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = TS_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ts",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ts_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spifc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPIFC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spifc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPIFC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spifc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data usb_bus_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+};
+
+static struct clk_regmap usb_bus_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = USB_BUSCLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = usb_bus_parents,
+		.num_parents = ARRAY_SIZE(usb_bus_parents),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = USB_BUSCLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = USB_BUSCLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_bus",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data sd_emmc_psram_dmc_parents[] = {
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+};
+
+static struct clk_regmap sd_emmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap sd_emmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &sd_emmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap psram_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PSRAM_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &psram_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PSRAM_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "psram",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap dmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &dmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dmc",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ceca_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_div.hw,
+			&ceca_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "cecb_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_div.hw,
+			&cecb_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+#define MESON_GATE(_name, _reg, _bit) \
+	MESON_PCLK(_name, _reg, _bit, &sys.hw)
+
+static MESON_GATE(clktree,	SYS_CLK_EN0,	0);
+static MESON_GATE(reset_ctrl,	SYS_CLK_EN0,	1);
+static MESON_GATE(analog_ctrl,	SYS_CLK_EN0,	2);
+static MESON_GATE(pwr_ctrl,	SYS_CLK_EN0,	3);
+static MESON_GATE(pad_ctrl,	SYS_CLK_EN0,	4);
+static MESON_GATE(sys_ctrl,	SYS_CLK_EN0,	5);
+static MESON_GATE(temp_sensor,	SYS_CLK_EN0,	6);
+static MESON_GATE(am2axi_dev,	SYS_CLK_EN0,	7);
+static MESON_GATE(spicc_b,	SYS_CLK_EN0,	8);
+static MESON_GATE(spicc_a,	SYS_CLK_EN0,	9);
+static MESON_GATE(msr,		SYS_CLK_EN0,	10);
+static MESON_GATE(audio,	SYS_CLK_EN0,	11);
+static MESON_GATE(jtag_ctrl,	SYS_CLK_EN0,	12);
+static MESON_GATE(saradc_en,	SYS_CLK_EN0,	13);
+static MESON_GATE(pwm_ef,	SYS_CLK_EN0,	14);
+static MESON_GATE(pwm_cd,	SYS_CLK_EN0,	15);
+static MESON_GATE(pwm_ab,	SYS_CLK_EN0,	16);
+static MESON_GATE(cec,		SYS_CLK_EN0,	17);
+static MESON_GATE(i2c_s,	SYS_CLK_EN0,	18);
+static MESON_GATE(ir_ctrl,	SYS_CLK_EN0,	19);
+static MESON_GATE(i2c_m_d,	SYS_CLK_EN0,	20);
+static MESON_GATE(i2c_m_c,	SYS_CLK_EN0,	21);
+static MESON_GATE(i2c_m_b,	SYS_CLK_EN0,	22);
+static MESON_GATE(i2c_m_a,	SYS_CLK_EN0,	23);
+static MESON_GATE(acodec,	SYS_CLK_EN0,	24);
+static MESON_GATE(otp,		SYS_CLK_EN0,	25);
+static MESON_GATE(sd_emmc_a,	SYS_CLK_EN0,	26);
+static MESON_GATE(usb_phy,	SYS_CLK_EN0,	27);
+static MESON_GATE(usb_ctrl,	SYS_CLK_EN0,	28);
+static MESON_GATE(sys_dspb,	SYS_CLK_EN0,	29);
+static MESON_GATE(sys_dspa,	SYS_CLK_EN0,	30);
+static MESON_GATE(dma,		SYS_CLK_EN0,	31);
+static MESON_GATE(irq_ctrl,	SYS_CLK_EN1,	0);
+static MESON_GATE(nic,		SYS_CLK_EN1,	1);
+static MESON_GATE(gic,		SYS_CLK_EN1,	2);
+static MESON_GATE(uart_c,	SYS_CLK_EN1,	3);
+static MESON_GATE(uart_b,	SYS_CLK_EN1,	4);
+static MESON_GATE(uart_a,	SYS_CLK_EN1,	5);
+static MESON_GATE(sys_psram,	SYS_CLK_EN1,	6);
+static MESON_GATE(rsa,		SYS_CLK_EN1,	8);
+static MESON_GATE(coresight,	SYS_CLK_EN1,	9);
+static MESON_GATE(am2axi_vad,	AXI_CLK_EN,	0);
+static MESON_GATE(audio_vad,	AXI_CLK_EN,	1);
+static MESON_GATE(axi_dmc,	AXI_CLK_EN,	3);
+static MESON_GATE(axi_psram,	AXI_CLK_EN,	4);
+static MESON_GATE(ramb,		AXI_CLK_EN,	5);
+static MESON_GATE(rama,		AXI_CLK_EN,	6);
+static MESON_GATE(axi_spifc,	AXI_CLK_EN,	7);
+static MESON_GATE(axi_nic,	AXI_CLK_EN,	8);
+static MESON_GATE(axi_dma,	AXI_CLK_EN,	9);
+static MESON_GATE(cpu_ctrl,	AXI_CLK_EN,	10);
+static MESON_GATE(rom,		AXI_CLK_EN,	11);
+static MESON_GATE(prod_i2c,	AXI_CLK_EN,	12);
+
+/* Array of all clocks registered by this provider */
+static struct clk_hw_onecell_data a1_periphs_clks = {
+	.hws = {
+		[CLKID_XTAL_IN]			= &xtal_in.hw,
+		[CLKID_FIXPLL_IN]		= &fixpll_in.hw,
+		[CLKID_USB_PHY_IN]		= &usb_phy_in.hw,
+		[CLKID_USB_CTRL_IN]		= &usb_ctrl_in.hw,
+		[CLKID_HIFIPLL_IN]		= &hifipll_in.hw,
+		[CLKID_SYSPLL_IN]		= &syspll_in.hw,
+		[CLKID_DDS_IN]			= &dds_in.hw,
+		[CLKID_SYS]			= &sys.hw,
+		[CLKID_CLKTREE]			= &clktree.hw,
+		[CLKID_RESET_CTRL]		= &reset_ctrl.hw,
+		[CLKID_ANALOG_CTRL]		= &analog_ctrl.hw,
+		[CLKID_PWR_CTRL]		= &pwr_ctrl.hw,
+		[CLKID_PAD_CTRL]		= &pad_ctrl.hw,
+		[CLKID_SYS_CTRL]		= &sys_ctrl.hw,
+		[CLKID_TEMP_SENSOR]		= &temp_sensor.hw,
+		[CLKID_AM2AXI_DIV]		= &am2axi_dev.hw,
+		[CLKID_SPICC_B]			= &spicc_b.hw,
+		[CLKID_SPICC_A]			= &spicc_a.hw,
+		[CLKID_MSR]			= &msr.hw,
+		[CLKID_AUDIO]			= &audio.hw,
+		[CLKID_JTAG_CTRL]		= &jtag_ctrl.hw,
+		[CLKID_SARADC_EN]		= &saradc_en.hw,
+		[CLKID_PWM_EF]			= &pwm_ef.hw,
+		[CLKID_PWM_CD]			= &pwm_cd.hw,
+		[CLKID_PWM_AB]			= &pwm_ab.hw,
+		[CLKID_CEC]			= &cec.hw,
+		[CLKID_I2C_S]			= &i2c_s.hw,
+		[CLKID_IR_CTRL]			= &ir_ctrl.hw,
+		[CLKID_I2C_M_D]			= &i2c_m_d.hw,
+		[CLKID_I2C_M_C]			= &i2c_m_c.hw,
+		[CLKID_I2C_M_B]			= &i2c_m_b.hw,
+		[CLKID_I2C_M_A]			= &i2c_m_a.hw,
+		[CLKID_ACODEC]			= &acodec.hw,
+		[CLKID_OTP]			= &otp.hw,
+		[CLKID_SD_EMMC_A]		= &sd_emmc_a.hw,
+		[CLKID_USB_PHY]			= &usb_phy.hw,
+		[CLKID_USB_CTRL]		= &usb_ctrl.hw,
+		[CLKID_SYS_DSPB]		= &sys_dspb.hw,
+		[CLKID_SYS_DSPA]		= &sys_dspa.hw,
+		[CLKID_DMA]			= &dma.hw,
+		[CLKID_IRQ_CTRL]		= &irq_ctrl.hw,
+		[CLKID_NIC]			= &nic.hw,
+		[CLKID_GIC]			= &gic.hw,
+		[CLKID_UART_C]			= &uart_c.hw,
+		[CLKID_UART_B]			= &uart_b.hw,
+		[CLKID_UART_A]			= &uart_a.hw,
+		[CLKID_SYS_PSRAM]		= &sys_psram.hw,
+		[CLKID_RSA]			= &rsa.hw,
+		[CLKID_CORESIGHT]		= &coresight.hw,
+		[CLKID_AM2AXI_VAD]		= &am2axi_vad.hw,
+		[CLKID_AUDIO_VAD]		= &audio_vad.hw,
+		[CLKID_AXI_DMC]			= &axi_dmc.hw,
+		[CLKID_AXI_PSRAM]		= &axi_psram.hw,
+		[CLKID_RAMB]			= &ramb.hw,
+		[CLKID_RAMA]			= &rama.hw,
+		[CLKID_AXI_SPIFC]		= &axi_spifc.hw,
+		[CLKID_AXI_NIC]			= &axi_nic.hw,
+		[CLKID_AXI_DMA]			= &axi_dma.hw,
+		[CLKID_CPU_CTRL]		= &cpu_ctrl.hw,
+		[CLKID_ROM]			= &rom.hw,
+		[CLKID_PROC_I2C]		= &prod_i2c.hw,
+		[CLKID_DSPA_SEL]		= &dspa_sel.hw,
+		[CLKID_DSPB_SEL]		= &dspb_sel.hw,
+		[CLKID_DSPA_EN]			= &dspa_en.hw,
+		[CLKID_DSPA_EN_NIC]		= &dspa_en_nic.hw,
+		[CLKID_DSPB_EN]			= &dspb_en.hw,
+		[CLKID_DSPB_EN_NIC]		= &dspb_en_nic.hw,
+		[CLKID_RTC]			= &rtc.hw,
+		[CLKID_CECA_32K]		= &ceca_32k_out.hw,
+		[CLKID_CECB_32K]		= &cecb_32k_out.hw,
+		[CLKID_24M]			= &clk_24m.hw,
+		[CLKID_12M]			= &clk_12m.hw,
+		[CLKID_FCLK_DIV2_DIVN]		= &fclk_div2_divn.hw,
+		[CLKID_GEN]			= &gen.hw,
+		[CLKID_SARADC_SEL]		= &saradc_sel.hw,
+		[CLKID_SARADC]			= &saradc.hw,
+		[CLKID_PWM_A]			= &pwm_a.hw,
+		[CLKID_PWM_B]			= &pwm_b.hw,
+		[CLKID_PWM_C]			= &pwm_c.hw,
+		[CLKID_PWM_D]			= &pwm_d.hw,
+		[CLKID_PWM_E]			= &pwm_e.hw,
+		[CLKID_PWM_F]			= &pwm_f.hw,
+		[CLKID_SPICC]			= &spicc.hw,
+		[CLKID_TS]			= &ts.hw,
+		[CLKID_SPIFC]			= &spifc.hw,
+		[CLKID_USB_BUS]			= &usb_bus.hw,
+		[CLKID_SD_EMMC]			= &sd_emmc.hw,
+		[CLKID_PSRAM]			= &psram.hw,
+		[CLKID_DMC]			= &dmc.hw,
+		[CLKID_SYS_A_SEL]		= &sys_a_sel.hw,
+		[CLKID_SYS_A_DIV]		= &sys_a_div.hw,
+		[CLKID_SYS_A]			= &sys_a.hw,
+		[CLKID_SYS_B_SEL]		= &sys_b_sel.hw,
+		[CLKID_SYS_B_DIV]		= &sys_b_div.hw,
+		[CLKID_SYS_B]			= &sys_b.hw,
+		[CLKID_DSPA_A_SEL]		= &dspa_a_sel.hw,
+		[CLKID_DSPA_A_DIV]		= &dspa_a_div.hw,
+		[CLKID_DSPA_A]			= &dspa_a.hw,
+		[CLKID_DSPA_B_SEL]		= &dspa_b_sel.hw,
+		[CLKID_DSPA_B_DIV]		= &dspa_b_div.hw,
+		[CLKID_DSPA_B]			= &dspa_b.hw,
+		[CLKID_DSPB_A_SEL]		= &dspb_a_sel.hw,
+		[CLKID_DSPB_A_DIV]		= &dspb_a_div.hw,
+		[CLKID_DSPB_A]			= &dspb_a.hw,
+		[CLKID_DSPB_B_SEL]		= &dspb_b_sel.hw,
+		[CLKID_DSPB_B_DIV]		= &dspb_b_div.hw,
+		[CLKID_DSPB_B]			= &dspb_b.hw,
+		[CLKID_RTC_32K_IN]		= &rtc_32k_in.hw,
+		[CLKID_RTC_32K_DIV]		= &rtc_32k_div.hw,
+		[CLKID_RTC_32K_XTAL]		= &rtc_32k_xtal.hw,
+		[CLKID_RTC_32K_SEL]		= &rtc_32k_sel.hw,
+		[CLKID_CECB_32K_IN]		= &cecb_32k_in.hw,
+		[CLKID_CECB_32K_DIV]		= &cecb_32k_div.hw,
+		[CLKID_CECB_32K_SEL_PRE]	= &cecb_32k_sel_pre.hw,
+		[CLKID_CECB_32K_SEL]		= &cecb_32k_sel.hw,
+		[CLKID_CECA_32K_IN]		= &ceca_32k_in.hw,
+		[CLKID_CECA_32K_DIV]		= &ceca_32k_div.hw,
+		[CLKID_CECA_32K_SEL_PRE]	= &ceca_32k_sel_pre.hw,
+		[CLKID_CECA_32K_SEL]		= &ceca_32k_sel.hw,
+		[CLKID_DIV2_PRE]		= &fclk_div2_divn_pre.hw,
+		[CLKID_24M_DIV2]		= &clk_24m_div2.hw,
+		[CLKID_GEN_SEL]			= &gen_sel.hw,
+		[CLKID_GEN_DIV]			= &gen_div.hw,
+		[CLKID_SARADC_DIV]		= &saradc_div.hw,
+		[CLKID_PWM_A_SEL]		= &pwm_a_sel.hw,
+		[CLKID_PWM_A_DIV]		= &pwm_a_div.hw,
+		[CLKID_PWM_B_SEL]		= &pwm_b_sel.hw,
+		[CLKID_PWM_B_DIV]		= &pwm_b_div.hw,
+		[CLKID_PWM_C_SEL]		= &pwm_c_sel.hw,
+		[CLKID_PWM_C_DIV]		= &pwm_c_div.hw,
+		[CLKID_PWM_D_SEL]		= &pwm_d_sel.hw,
+		[CLKID_PWM_D_DIV]		= &pwm_d_div.hw,
+		[CLKID_PWM_E_SEL]		= &pwm_e_sel.hw,
+		[CLKID_PWM_E_DIV]		= &pwm_e_div.hw,
+		[CLKID_PWM_F_SEL]		= &pwm_f_sel.hw,
+		[CLKID_PWM_F_DIV]		= &pwm_f_div.hw,
+		[CLKID_SPICC_SEL]		= &spicc_sel.hw,
+		[CLKID_SPICC_DIV]		= &spicc_div.hw,
+		[CLKID_SPICC_SEL2]		= &spicc_sel2.hw,
+		[CLKID_TS_DIV]			= &ts_div.hw,
+		[CLKID_SPIFC_SEL]		= &spifc_sel.hw,
+		[CLKID_SPIFC_DIV]		= &spifc_div.hw,
+		[CLKID_SPIFC_SEL2]		= &spifc_sel2.hw,
+		[CLKID_USB_BUS_SEL]		= &usb_bus_sel.hw,
+		[CLKID_USB_BUS_DIV]		= &usb_bus_div.hw,
+		[CLKID_SD_EMMC_SEL]		= &sd_emmc_sel.hw,
+		[CLKID_SD_EMMC_DIV]		= &sd_emmc_div.hw,
+		[CLKID_SD_EMMC_SEL2]		= &sd_emmc_sel2.hw,
+		[CLKID_PSRAM_SEL]		= &psram_sel.hw,
+		[CLKID_PSRAM_DIV]		= &psram_div.hw,
+		[CLKID_PSRAM_SEL2]		= &psram_sel2.hw,
+		[CLKID_DMC_SEL]			= &dmc_sel.hw,
+		[CLKID_DMC_DIV]			= &dmc_div.hw,
+		[CLKID_DMC_SEL2]		= &dmc_sel2.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const a1_periphs_regmaps[] = {
+	&xtal_in,
+	&fixpll_in,
+	&usb_phy_in,
+	&usb_ctrl_in,
+	&hifipll_in,
+	&syspll_in,
+	&dds_in,
+	&sys,
+	&clktree,
+	&reset_ctrl,
+	&analog_ctrl,
+	&pwr_ctrl,
+	&pad_ctrl,
+	&sys_ctrl,
+	&temp_sensor,
+	&am2axi_dev,
+	&spicc_b,
+	&spicc_a,
+	&msr,
+	&audio,
+	&jtag_ctrl,
+	&saradc_en,
+	&pwm_ef,
+	&pwm_cd,
+	&pwm_ab,
+	&cec,
+	&i2c_s,
+	&ir_ctrl,
+	&i2c_m_d,
+	&i2c_m_c,
+	&i2c_m_b,
+	&i2c_m_a,
+	&acodec,
+	&otp,
+	&sd_emmc_a,
+	&usb_phy,
+	&usb_ctrl,
+	&sys_dspb,
+	&sys_dspa,
+	&dma,
+	&irq_ctrl,
+	&nic,
+	&gic,
+	&uart_c,
+	&uart_b,
+	&uart_a,
+	&sys_psram,
+	&rsa,
+	&coresight,
+	&am2axi_vad,
+	&audio_vad,
+	&axi_dmc,
+	&axi_psram,
+	&ramb,
+	&rama,
+	&axi_spifc,
+	&axi_nic,
+	&axi_dma,
+	&cpu_ctrl,
+	&rom,
+	&prod_i2c,
+	&dspa_sel,
+	&dspb_sel,
+	&dspa_en,
+	&dspa_en_nic,
+	&dspb_en,
+	&dspb_en_nic,
+	&rtc,
+	&ceca_32k_out,
+	&cecb_32k_out,
+	&clk_24m,
+	&clk_12m,
+	&fclk_div2_divn,
+	&gen,
+	&saradc_sel,
+	&saradc,
+	&pwm_a,
+	&pwm_b,
+	&pwm_c,
+	&pwm_d,
+	&pwm_e,
+	&pwm_f,
+	&spicc,
+	&ts,
+	&spifc,
+	&usb_bus,
+	&sd_emmc,
+	&psram,
+	&dmc,
+	&sys_a_sel,
+	&sys_a_div,
+	&sys_a,
+	&sys_b_sel,
+	&sys_b_div,
+	&sys_b,
+	&dspa_a_sel,
+	&dspa_a_div,
+	&dspa_a,
+	&dspa_b_sel,
+	&dspa_b_div,
+	&dspa_b,
+	&dspb_a_sel,
+	&dspb_a_div,
+	&dspb_a,
+	&dspb_b_sel,
+	&dspb_b_div,
+	&dspb_b,
+	&rtc_32k_in,
+	&rtc_32k_div,
+	&rtc_32k_xtal,
+	&rtc_32k_sel,
+	&cecb_32k_in,
+	&cecb_32k_div,
+	&cecb_32k_sel_pre,
+	&cecb_32k_sel,
+	&ceca_32k_in,
+	&ceca_32k_div,
+	&ceca_32k_sel_pre,
+	&ceca_32k_sel,
+	&fclk_div2_divn_pre,
+	&gen_sel,
+	&gen_div,
+	&saradc_div,
+	&pwm_a_sel,
+	&pwm_a_div,
+	&pwm_b_sel,
+	&pwm_b_div,
+	&pwm_c_sel,
+	&pwm_c_div,
+	&pwm_d_sel,
+	&pwm_d_div,
+	&pwm_e_sel,
+	&pwm_e_div,
+	&pwm_f_sel,
+	&pwm_f_div,
+	&spicc_sel,
+	&spicc_div,
+	&spicc_sel2,
+	&ts_div,
+	&spifc_sel,
+	&spifc_div,
+	&spifc_sel2,
+	&usb_bus_sel,
+	&usb_bus_div,
+	&sd_emmc_sel,
+	&sd_emmc_div,
+	&sd_emmc_sel2,
+	&psram_sel,
+	&psram_div,
+	&psram_sel2,
+	&dmc_sel,
+	&dmc_div,
+	&dmc_sel2,
+};
+
+static struct regmap_config a1_periphs_regmap_cfg = {
+	.reg_bits   = 32,
+	.val_bits   = 32,
+	.reg_stride = 4,
+};
+
+static int meson_a1_periphs_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	struct regmap *map;
+	int clkid, i, err;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base),
+				     "can't ioremap resource\n");
+
+	map = devm_regmap_init_mmio(dev, base, &a1_periphs_regmap_cfg);
+	if (IS_ERR(map))
+		return dev_err_probe(dev, PTR_ERR(map),
+				     "can't init regmap mmio region\n");
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(a1_periphs_regmaps); i++)
+		a1_periphs_regmaps[i]->map = map;
+
+	for (clkid = 0; clkid < a1_periphs_clks.num; clkid++) {
+		err = devm_clk_hw_register(dev, a1_periphs_clks.hws[clkid]);
+		if (err)
+			return dev_err_probe(dev, err,
+					     "clock[%d] registration failed\n",
+					     clkid);
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &a1_periphs_clks);
+}
+
+static const struct of_device_id a1_periphs_clkc_match_table[] = {
+	{ .compatible = "amlogic,a1-peripherals-clkc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, a1_periphs_clkc_match_table);
+
+static struct platform_driver a1_periphs_clkc_driver = {
+	.probe = meson_a1_periphs_probe,
+	.driver = {
+		.name = "a1-peripherals-clkc",
+		.of_match_table = a1_periphs_clkc_match_table,
+	},
+};
+
+module_platform_driver(a1_periphs_clkc_driver);
+MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>");
+MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/a1-peripherals.h b/drivers/clk/meson/a1-peripherals.h
new file mode 100644
index 000000000000..526fc9ba5c9f
--- /dev/null
+++ b/drivers/clk/meson/a1-peripherals.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Amlogic A1 Peripherals Clock Controller internals
+ *
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#ifndef __A1_PERIPHERALS_H
+#define __A1_PERIPHERALS_H
+
+/* peripherals clock controller register offset */
+#define SYS_OSCIN_CTRL		0x0
+#define RTC_BY_OSCIN_CTRL0	0x4
+#define RTC_BY_OSCIN_CTRL1	0x8
+#define RTC_CTRL		0xc
+#define SYS_CLK_CTRL0		0x10
+#define SYS_CLK_EN0		0x1c
+#define SYS_CLK_EN1		0x20
+#define AXI_CLK_EN		0x24
+#define DSPA_CLK_EN		0x28
+#define DSPB_CLK_EN		0x2c
+#define DSPA_CLK_CTRL0		0x30
+#define DSPB_CLK_CTRL0		0x34
+#define CLK12_24_CTRL		0x38
+#define GEN_CLK_CTRL		0x3c
+#define SAR_ADC_CLK_CTRL	0xc0
+#define PWM_CLK_AB_CTRL		0xc4
+#define PWM_CLK_CD_CTRL		0xc8
+#define PWM_CLK_EF_CTRL		0xcc
+#define SPICC_CLK_CTRL		0xd0
+#define TS_CLK_CTRL		0xd4
+#define SPIFC_CLK_CTRL		0xd8
+#define USB_BUSCLK_CTRL		0xdc
+#define SD_EMMC_CLK_CTRL	0xe0
+#define CECA_CLK_CTRL0		0xe4
+#define CECA_CLK_CTRL1		0xe8
+#define CECB_CLK_CTRL0		0xec
+#define CECB_CLK_CTRL1		0xf0
+#define PSRAM_CLK_CTRL		0xf4
+#define DMC_CLK_CTRL		0xf8
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
+
+/*
+ * CLKID index values for internal clocks
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/a1-peripherals-clkc.h.
+ * Only the clocks ids we don't want to expose, such as the internal muxes and
+ * dividers of composite clocks, will remain defined here.
+ */
+#define CLKID_XTAL_IN		0
+#define CLKID_DSPA_SEL		61
+#define CLKID_DSPB_SEL		62
+#define CLKID_SARADC_SEL	74
+#define CLKID_SYS_A_SEL		89
+#define CLKID_SYS_A_DIV		90
+#define CLKID_SYS_A		91
+#define CLKID_SYS_B_SEL		92
+#define CLKID_SYS_B_DIV		93
+#define CLKID_SYS_B		94
+#define CLKID_DSPA_A_DIV	96
+#define CLKID_DSPA_A		97
+#define CLKID_DSPA_B_DIV	99
+#define CLKID_DSPA_B		100
+#define CLKID_DSPB_A_DIV	102
+#define CLKID_DSPB_A		103
+#define CLKID_DSPB_B_DIV	105
+#define CLKID_DSPB_B		106
+#define CLKID_RTC_32K_IN	107
+#define CLKID_RTC_32K_DIV	108
+#define CLKID_RTC_32K_XTAL	109
+#define CLKID_RTC_32K_SEL	110
+#define CLKID_CECB_32K_IN	111
+#define CLKID_CECB_32K_DIV	112
+#define CLKID_CECA_32K_IN	115
+#define CLKID_CECA_32K_DIV	116
+#define CLKID_DIV2_PRE		119
+#define CLKID_24M_DIV2		120
+#define CLKID_GEN_DIV		122
+#define CLKID_SARADC_DIV	123
+#define CLKID_PWM_A_DIV		125
+#define CLKID_PWM_B_DIV		127
+#define CLKID_PWM_C_DIV		129
+#define CLKID_PWM_D_DIV		131
+#define CLKID_PWM_E_DIV		133
+#define CLKID_PWM_F_DIV		135
+#define CLKID_SPICC_SEL		136
+#define CLKID_SPICC_DIV		137
+#define CLKID_SPICC_SEL2	138
+#define CLKID_TS_DIV		139
+#define CLKID_SPIFC_SEL		140
+#define CLKID_SPIFC_DIV		141
+#define CLKID_SPIFC_SEL2	142
+#define CLKID_USB_BUS_SEL	143
+#define CLKID_USB_BUS_DIV	144
+#define CLKID_SD_EMMC_SEL	145
+#define CLKID_SD_EMMC_DIV	146
+#define CLKID_PSRAM_SEL		148
+#define CLKID_PSRAM_DIV		149
+#define CLKID_PSRAM_SEL2	150
+#define CLKID_DMC_SEL		151
+#define CLKID_DMC_DIV		152
+#define CLKID_DMC_SEL2		153
+#define NR_CLKS			154
+
+#endif /* __A1_PERIPHERALS_H */
-- 
2.36.0


WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>,
	<mturquette@baylibre.com>, <sboyd@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<khilman@baylibre.com>, <martin.blumenstingl@googlemail.com>
Cc: <jian.hu@amlogic.com>, <kernel@sberdevices.ru>,
	<rockosov@gmail.com>, <linux-amlogic@lists.infradead.org>,
	<linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Dmitry Rokosov <ddrokosov@sberdevices.ru>
Subject: [PATCH v15 6/6] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver
Date: Wed, 17 May 2023 16:33:09 +0300	[thread overview]
Message-ID: <20230517133309.9874-7-ddrokosov@sberdevices.ru> (raw)
In-Reply-To: <20230517133309.9874-1-ddrokosov@sberdevices.ru>

Introduce Peripherals clock controller for Amlogic A1 SoC family.

A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU,
and Audio.
This patchset adds support for Amlogic A1 Peripherals clock driver and
allows to generate clocks for all A1 SoC peripheral IPs.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
---
 drivers/clk/meson/Kconfig          |   10 +
 drivers/clk/meson/Makefile         |    1 +
 drivers/clk/meson/a1-peripherals.c | 2273 ++++++++++++++++++++++++++++
 drivers/clk/meson/a1-peripherals.h |  113 ++
 4 files changed, 2397 insertions(+)
 create mode 100644 drivers/clk/meson/a1-peripherals.c
 create mode 100644 drivers/clk/meson/a1-peripherals.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 693c4cf60f27..8ce846fdbe43 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -109,6 +109,16 @@ config COMMON_CLK_A1_PLL
 	  device, A1 SoC Family. Say Y if you want A1 PLL clock controller
 	  to work.
 
+config COMMON_CLK_A1_PERIPHERALS
+	tristate "Amlogic A1 SoC Peripherals clock controller support"
+	depends on ARM64
+	select COMMON_CLK_MESON_DUALDIV
+	select COMMON_CLK_MESON_REGMAP
+	help
+	  Support for the Peripherals clock controller on Amlogic A113L based
+	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock
+	  controller to work.
+
 config COMMON_CLK_G12A
 	tristate "G12 and SM1 SoC clock controllers support"
 	depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 2f17f475a48f..d5288662881d 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
 obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
 obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
+obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
 obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
 obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c
new file mode 100644
index 000000000000..5e7a37cbbb88
--- /dev/null
+++ b/drivers/clk/meson/a1-peripherals.c
@@ -0,0 +1,2273 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "a1-peripherals.h"
+#include "clk-dualdiv.h"
+#include "clk-regmap.h"
+
+static struct clk_regmap xtal_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "xtal_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fixpll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "fixpll_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_phy_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 2,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_phy_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_ctrl_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 3,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_ctrl_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap hifipll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 4,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hifipll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap syspll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 5,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "syspll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap dds_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dds_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static const struct meson_clk_dualdiv_param clk_32k_div_table[] = {
+	{
+		.dual		= 1,
+		.n1		= 733,
+		.m1		= 8,
+		.n2		= 732,
+		.m2		= 11,
+	},
+	{}
+};
+
+static struct clk_regmap rtc_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_xtal = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL1,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_xtal",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = RTC_CTRL,
+		.mask = 0x3,
+		.shift = 0,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_xtal.hw,
+			&rtc_32k_div.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * All clocks that can be inherited from a more accurate RTC clock are marked
+ * with the CLK_SET_RATE_NO_REPARENT flag. This is because in certain
+ * situations, we may need to freeze their parent. The parent setup of these
+ * clocks should be located on the device tree side.
+ */
+struct clk_regmap rtc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_sys[] = { 0, 1, 2, 3, 7 };
+static const struct clk_parent_data sys_parents[] = {
+	{ .fw_name = "xtal" },
+	{ .fw_name = "fclk_div2" },
+	{ .fw_name = "fclk_div3" },
+	{ .fw_name = "fclk_div5" },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap sys_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a.hw,
+			&sys_b.hw,
+		},
+		.num_parents = 2,
+		/*
+		 * This clock is used by APB bus which is set in boot ROM code
+		 * and is required by the platform to operate correctly.
+		 * Until the following condition are met, we need this clock to
+		 * be marked as critical:
+		 * a) Mark the clock used by a firmware resource, if possible
+		 * b) CCF has a clock hand-off mechanism to make the sure the
+		 *    clock stays on until the proper driver comes along
+		 */
+		.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+	},
+};
+
+static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 };
+static const struct clk_parent_data dsp_ab_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap dspa_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a.hw,
+			&dspa_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a.hw,
+			&dspb_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap clk_24m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "24m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor clk_24m_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "24m_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap clk_12m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 10,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "12m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m_div2.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn_pre = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = CLK12_24_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn_pre",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "fclk_div2",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 12,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&fclk_div2_divn_pre.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver,
+ * the index 4 is the clock measurement source, it's not supported yet
+ */
+static u32 gen_table[] = { 0, 1, 3, 5, 6, 7, 8 };
+static const struct clk_parent_data gen_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &rtc.hw },
+	{ .fw_name = "hifi_pll", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "fclk_div7", },
+};
+
+static struct clk_regmap gen_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = GEN_CLK_CTRL,
+		.mask = 0xf,
+		.shift = 12,
+		.table = gen_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = gen_parent_data,
+		.num_parents = ARRAY_SIZE(gen_parent_data),
+		/*
+		 * The GEN clock can be connected to an external pad, so it
+		 * may be set up directly from the device tree. Additionally,
+		 * the GEN clock can be inherited from a more accurate RTC
+		 * clock, so in certain situations, it may be necessary
+		 * to freeze its parent.
+		 */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap gen_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = GEN_CLK_CTRL,
+		.shift = 0,
+		.width = 11,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gen = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = GEN_CLK_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gen",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .fw_name = "xtal", },
+			{ .hw = &sys.hw, },
+		},
+		.num_parents = 2,
+	},
+};
+
+static struct clk_regmap saradc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "saradc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_abcd_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_c",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_d",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_ef_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div5", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_e_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_e_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_e = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_e",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_f",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * spicc clk
+ *   fdiv2   |\         |\       _____
+ *  ---------| |---DIV--| |     |     |    spicc out
+ *  ---------| |        | |-----|GATE |---------
+ *     ..... |/         | /     |_____|
+ *  --------------------|/
+ *                 24M
+ */
+static const struct clk_parent_data spicc_spifc_parents[] = {
+	{ .fw_name = "fclk_div2"},
+	{ .fw_name = "fclk_div3"},
+	{ .fw_name = "fclk_div5"},
+	{ .fw_name = "hifi_pll" },
+};
+
+static struct clk_regmap spicc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spicc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPICC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spicc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPICC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ts_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = TS_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ts_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ts = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = TS_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ts",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ts_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spifc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPIFC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spifc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPIFC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spifc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data usb_bus_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+};
+
+static struct clk_regmap usb_bus_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = USB_BUSCLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = usb_bus_parents,
+		.num_parents = ARRAY_SIZE(usb_bus_parents),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = USB_BUSCLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = USB_BUSCLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_bus",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data sd_emmc_psram_dmc_parents[] = {
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+};
+
+static struct clk_regmap sd_emmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap sd_emmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &sd_emmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap psram_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PSRAM_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &psram_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PSRAM_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "psram",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap dmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &dmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dmc",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ceca_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_div.hw,
+			&ceca_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "cecb_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_div.hw,
+			&cecb_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+#define MESON_GATE(_name, _reg, _bit) \
+	MESON_PCLK(_name, _reg, _bit, &sys.hw)
+
+static MESON_GATE(clktree,	SYS_CLK_EN0,	0);
+static MESON_GATE(reset_ctrl,	SYS_CLK_EN0,	1);
+static MESON_GATE(analog_ctrl,	SYS_CLK_EN0,	2);
+static MESON_GATE(pwr_ctrl,	SYS_CLK_EN0,	3);
+static MESON_GATE(pad_ctrl,	SYS_CLK_EN0,	4);
+static MESON_GATE(sys_ctrl,	SYS_CLK_EN0,	5);
+static MESON_GATE(temp_sensor,	SYS_CLK_EN0,	6);
+static MESON_GATE(am2axi_dev,	SYS_CLK_EN0,	7);
+static MESON_GATE(spicc_b,	SYS_CLK_EN0,	8);
+static MESON_GATE(spicc_a,	SYS_CLK_EN0,	9);
+static MESON_GATE(msr,		SYS_CLK_EN0,	10);
+static MESON_GATE(audio,	SYS_CLK_EN0,	11);
+static MESON_GATE(jtag_ctrl,	SYS_CLK_EN0,	12);
+static MESON_GATE(saradc_en,	SYS_CLK_EN0,	13);
+static MESON_GATE(pwm_ef,	SYS_CLK_EN0,	14);
+static MESON_GATE(pwm_cd,	SYS_CLK_EN0,	15);
+static MESON_GATE(pwm_ab,	SYS_CLK_EN0,	16);
+static MESON_GATE(cec,		SYS_CLK_EN0,	17);
+static MESON_GATE(i2c_s,	SYS_CLK_EN0,	18);
+static MESON_GATE(ir_ctrl,	SYS_CLK_EN0,	19);
+static MESON_GATE(i2c_m_d,	SYS_CLK_EN0,	20);
+static MESON_GATE(i2c_m_c,	SYS_CLK_EN0,	21);
+static MESON_GATE(i2c_m_b,	SYS_CLK_EN0,	22);
+static MESON_GATE(i2c_m_a,	SYS_CLK_EN0,	23);
+static MESON_GATE(acodec,	SYS_CLK_EN0,	24);
+static MESON_GATE(otp,		SYS_CLK_EN0,	25);
+static MESON_GATE(sd_emmc_a,	SYS_CLK_EN0,	26);
+static MESON_GATE(usb_phy,	SYS_CLK_EN0,	27);
+static MESON_GATE(usb_ctrl,	SYS_CLK_EN0,	28);
+static MESON_GATE(sys_dspb,	SYS_CLK_EN0,	29);
+static MESON_GATE(sys_dspa,	SYS_CLK_EN0,	30);
+static MESON_GATE(dma,		SYS_CLK_EN0,	31);
+static MESON_GATE(irq_ctrl,	SYS_CLK_EN1,	0);
+static MESON_GATE(nic,		SYS_CLK_EN1,	1);
+static MESON_GATE(gic,		SYS_CLK_EN1,	2);
+static MESON_GATE(uart_c,	SYS_CLK_EN1,	3);
+static MESON_GATE(uart_b,	SYS_CLK_EN1,	4);
+static MESON_GATE(uart_a,	SYS_CLK_EN1,	5);
+static MESON_GATE(sys_psram,	SYS_CLK_EN1,	6);
+static MESON_GATE(rsa,		SYS_CLK_EN1,	8);
+static MESON_GATE(coresight,	SYS_CLK_EN1,	9);
+static MESON_GATE(am2axi_vad,	AXI_CLK_EN,	0);
+static MESON_GATE(audio_vad,	AXI_CLK_EN,	1);
+static MESON_GATE(axi_dmc,	AXI_CLK_EN,	3);
+static MESON_GATE(axi_psram,	AXI_CLK_EN,	4);
+static MESON_GATE(ramb,		AXI_CLK_EN,	5);
+static MESON_GATE(rama,		AXI_CLK_EN,	6);
+static MESON_GATE(axi_spifc,	AXI_CLK_EN,	7);
+static MESON_GATE(axi_nic,	AXI_CLK_EN,	8);
+static MESON_GATE(axi_dma,	AXI_CLK_EN,	9);
+static MESON_GATE(cpu_ctrl,	AXI_CLK_EN,	10);
+static MESON_GATE(rom,		AXI_CLK_EN,	11);
+static MESON_GATE(prod_i2c,	AXI_CLK_EN,	12);
+
+/* Array of all clocks registered by this provider */
+static struct clk_hw_onecell_data a1_periphs_clks = {
+	.hws = {
+		[CLKID_XTAL_IN]			= &xtal_in.hw,
+		[CLKID_FIXPLL_IN]		= &fixpll_in.hw,
+		[CLKID_USB_PHY_IN]		= &usb_phy_in.hw,
+		[CLKID_USB_CTRL_IN]		= &usb_ctrl_in.hw,
+		[CLKID_HIFIPLL_IN]		= &hifipll_in.hw,
+		[CLKID_SYSPLL_IN]		= &syspll_in.hw,
+		[CLKID_DDS_IN]			= &dds_in.hw,
+		[CLKID_SYS]			= &sys.hw,
+		[CLKID_CLKTREE]			= &clktree.hw,
+		[CLKID_RESET_CTRL]		= &reset_ctrl.hw,
+		[CLKID_ANALOG_CTRL]		= &analog_ctrl.hw,
+		[CLKID_PWR_CTRL]		= &pwr_ctrl.hw,
+		[CLKID_PAD_CTRL]		= &pad_ctrl.hw,
+		[CLKID_SYS_CTRL]		= &sys_ctrl.hw,
+		[CLKID_TEMP_SENSOR]		= &temp_sensor.hw,
+		[CLKID_AM2AXI_DIV]		= &am2axi_dev.hw,
+		[CLKID_SPICC_B]			= &spicc_b.hw,
+		[CLKID_SPICC_A]			= &spicc_a.hw,
+		[CLKID_MSR]			= &msr.hw,
+		[CLKID_AUDIO]			= &audio.hw,
+		[CLKID_JTAG_CTRL]		= &jtag_ctrl.hw,
+		[CLKID_SARADC_EN]		= &saradc_en.hw,
+		[CLKID_PWM_EF]			= &pwm_ef.hw,
+		[CLKID_PWM_CD]			= &pwm_cd.hw,
+		[CLKID_PWM_AB]			= &pwm_ab.hw,
+		[CLKID_CEC]			= &cec.hw,
+		[CLKID_I2C_S]			= &i2c_s.hw,
+		[CLKID_IR_CTRL]			= &ir_ctrl.hw,
+		[CLKID_I2C_M_D]			= &i2c_m_d.hw,
+		[CLKID_I2C_M_C]			= &i2c_m_c.hw,
+		[CLKID_I2C_M_B]			= &i2c_m_b.hw,
+		[CLKID_I2C_M_A]			= &i2c_m_a.hw,
+		[CLKID_ACODEC]			= &acodec.hw,
+		[CLKID_OTP]			= &otp.hw,
+		[CLKID_SD_EMMC_A]		= &sd_emmc_a.hw,
+		[CLKID_USB_PHY]			= &usb_phy.hw,
+		[CLKID_USB_CTRL]		= &usb_ctrl.hw,
+		[CLKID_SYS_DSPB]		= &sys_dspb.hw,
+		[CLKID_SYS_DSPA]		= &sys_dspa.hw,
+		[CLKID_DMA]			= &dma.hw,
+		[CLKID_IRQ_CTRL]		= &irq_ctrl.hw,
+		[CLKID_NIC]			= &nic.hw,
+		[CLKID_GIC]			= &gic.hw,
+		[CLKID_UART_C]			= &uart_c.hw,
+		[CLKID_UART_B]			= &uart_b.hw,
+		[CLKID_UART_A]			= &uart_a.hw,
+		[CLKID_SYS_PSRAM]		= &sys_psram.hw,
+		[CLKID_RSA]			= &rsa.hw,
+		[CLKID_CORESIGHT]		= &coresight.hw,
+		[CLKID_AM2AXI_VAD]		= &am2axi_vad.hw,
+		[CLKID_AUDIO_VAD]		= &audio_vad.hw,
+		[CLKID_AXI_DMC]			= &axi_dmc.hw,
+		[CLKID_AXI_PSRAM]		= &axi_psram.hw,
+		[CLKID_RAMB]			= &ramb.hw,
+		[CLKID_RAMA]			= &rama.hw,
+		[CLKID_AXI_SPIFC]		= &axi_spifc.hw,
+		[CLKID_AXI_NIC]			= &axi_nic.hw,
+		[CLKID_AXI_DMA]			= &axi_dma.hw,
+		[CLKID_CPU_CTRL]		= &cpu_ctrl.hw,
+		[CLKID_ROM]			= &rom.hw,
+		[CLKID_PROC_I2C]		= &prod_i2c.hw,
+		[CLKID_DSPA_SEL]		= &dspa_sel.hw,
+		[CLKID_DSPB_SEL]		= &dspb_sel.hw,
+		[CLKID_DSPA_EN]			= &dspa_en.hw,
+		[CLKID_DSPA_EN_NIC]		= &dspa_en_nic.hw,
+		[CLKID_DSPB_EN]			= &dspb_en.hw,
+		[CLKID_DSPB_EN_NIC]		= &dspb_en_nic.hw,
+		[CLKID_RTC]			= &rtc.hw,
+		[CLKID_CECA_32K]		= &ceca_32k_out.hw,
+		[CLKID_CECB_32K]		= &cecb_32k_out.hw,
+		[CLKID_24M]			= &clk_24m.hw,
+		[CLKID_12M]			= &clk_12m.hw,
+		[CLKID_FCLK_DIV2_DIVN]		= &fclk_div2_divn.hw,
+		[CLKID_GEN]			= &gen.hw,
+		[CLKID_SARADC_SEL]		= &saradc_sel.hw,
+		[CLKID_SARADC]			= &saradc.hw,
+		[CLKID_PWM_A]			= &pwm_a.hw,
+		[CLKID_PWM_B]			= &pwm_b.hw,
+		[CLKID_PWM_C]			= &pwm_c.hw,
+		[CLKID_PWM_D]			= &pwm_d.hw,
+		[CLKID_PWM_E]			= &pwm_e.hw,
+		[CLKID_PWM_F]			= &pwm_f.hw,
+		[CLKID_SPICC]			= &spicc.hw,
+		[CLKID_TS]			= &ts.hw,
+		[CLKID_SPIFC]			= &spifc.hw,
+		[CLKID_USB_BUS]			= &usb_bus.hw,
+		[CLKID_SD_EMMC]			= &sd_emmc.hw,
+		[CLKID_PSRAM]			= &psram.hw,
+		[CLKID_DMC]			= &dmc.hw,
+		[CLKID_SYS_A_SEL]		= &sys_a_sel.hw,
+		[CLKID_SYS_A_DIV]		= &sys_a_div.hw,
+		[CLKID_SYS_A]			= &sys_a.hw,
+		[CLKID_SYS_B_SEL]		= &sys_b_sel.hw,
+		[CLKID_SYS_B_DIV]		= &sys_b_div.hw,
+		[CLKID_SYS_B]			= &sys_b.hw,
+		[CLKID_DSPA_A_SEL]		= &dspa_a_sel.hw,
+		[CLKID_DSPA_A_DIV]		= &dspa_a_div.hw,
+		[CLKID_DSPA_A]			= &dspa_a.hw,
+		[CLKID_DSPA_B_SEL]		= &dspa_b_sel.hw,
+		[CLKID_DSPA_B_DIV]		= &dspa_b_div.hw,
+		[CLKID_DSPA_B]			= &dspa_b.hw,
+		[CLKID_DSPB_A_SEL]		= &dspb_a_sel.hw,
+		[CLKID_DSPB_A_DIV]		= &dspb_a_div.hw,
+		[CLKID_DSPB_A]			= &dspb_a.hw,
+		[CLKID_DSPB_B_SEL]		= &dspb_b_sel.hw,
+		[CLKID_DSPB_B_DIV]		= &dspb_b_div.hw,
+		[CLKID_DSPB_B]			= &dspb_b.hw,
+		[CLKID_RTC_32K_IN]		= &rtc_32k_in.hw,
+		[CLKID_RTC_32K_DIV]		= &rtc_32k_div.hw,
+		[CLKID_RTC_32K_XTAL]		= &rtc_32k_xtal.hw,
+		[CLKID_RTC_32K_SEL]		= &rtc_32k_sel.hw,
+		[CLKID_CECB_32K_IN]		= &cecb_32k_in.hw,
+		[CLKID_CECB_32K_DIV]		= &cecb_32k_div.hw,
+		[CLKID_CECB_32K_SEL_PRE]	= &cecb_32k_sel_pre.hw,
+		[CLKID_CECB_32K_SEL]		= &cecb_32k_sel.hw,
+		[CLKID_CECA_32K_IN]		= &ceca_32k_in.hw,
+		[CLKID_CECA_32K_DIV]		= &ceca_32k_div.hw,
+		[CLKID_CECA_32K_SEL_PRE]	= &ceca_32k_sel_pre.hw,
+		[CLKID_CECA_32K_SEL]		= &ceca_32k_sel.hw,
+		[CLKID_DIV2_PRE]		= &fclk_div2_divn_pre.hw,
+		[CLKID_24M_DIV2]		= &clk_24m_div2.hw,
+		[CLKID_GEN_SEL]			= &gen_sel.hw,
+		[CLKID_GEN_DIV]			= &gen_div.hw,
+		[CLKID_SARADC_DIV]		= &saradc_div.hw,
+		[CLKID_PWM_A_SEL]		= &pwm_a_sel.hw,
+		[CLKID_PWM_A_DIV]		= &pwm_a_div.hw,
+		[CLKID_PWM_B_SEL]		= &pwm_b_sel.hw,
+		[CLKID_PWM_B_DIV]		= &pwm_b_div.hw,
+		[CLKID_PWM_C_SEL]		= &pwm_c_sel.hw,
+		[CLKID_PWM_C_DIV]		= &pwm_c_div.hw,
+		[CLKID_PWM_D_SEL]		= &pwm_d_sel.hw,
+		[CLKID_PWM_D_DIV]		= &pwm_d_div.hw,
+		[CLKID_PWM_E_SEL]		= &pwm_e_sel.hw,
+		[CLKID_PWM_E_DIV]		= &pwm_e_div.hw,
+		[CLKID_PWM_F_SEL]		= &pwm_f_sel.hw,
+		[CLKID_PWM_F_DIV]		= &pwm_f_div.hw,
+		[CLKID_SPICC_SEL]		= &spicc_sel.hw,
+		[CLKID_SPICC_DIV]		= &spicc_div.hw,
+		[CLKID_SPICC_SEL2]		= &spicc_sel2.hw,
+		[CLKID_TS_DIV]			= &ts_div.hw,
+		[CLKID_SPIFC_SEL]		= &spifc_sel.hw,
+		[CLKID_SPIFC_DIV]		= &spifc_div.hw,
+		[CLKID_SPIFC_SEL2]		= &spifc_sel2.hw,
+		[CLKID_USB_BUS_SEL]		= &usb_bus_sel.hw,
+		[CLKID_USB_BUS_DIV]		= &usb_bus_div.hw,
+		[CLKID_SD_EMMC_SEL]		= &sd_emmc_sel.hw,
+		[CLKID_SD_EMMC_DIV]		= &sd_emmc_div.hw,
+		[CLKID_SD_EMMC_SEL2]		= &sd_emmc_sel2.hw,
+		[CLKID_PSRAM_SEL]		= &psram_sel.hw,
+		[CLKID_PSRAM_DIV]		= &psram_div.hw,
+		[CLKID_PSRAM_SEL2]		= &psram_sel2.hw,
+		[CLKID_DMC_SEL]			= &dmc_sel.hw,
+		[CLKID_DMC_DIV]			= &dmc_div.hw,
+		[CLKID_DMC_SEL2]		= &dmc_sel2.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const a1_periphs_regmaps[] = {
+	&xtal_in,
+	&fixpll_in,
+	&usb_phy_in,
+	&usb_ctrl_in,
+	&hifipll_in,
+	&syspll_in,
+	&dds_in,
+	&sys,
+	&clktree,
+	&reset_ctrl,
+	&analog_ctrl,
+	&pwr_ctrl,
+	&pad_ctrl,
+	&sys_ctrl,
+	&temp_sensor,
+	&am2axi_dev,
+	&spicc_b,
+	&spicc_a,
+	&msr,
+	&audio,
+	&jtag_ctrl,
+	&saradc_en,
+	&pwm_ef,
+	&pwm_cd,
+	&pwm_ab,
+	&cec,
+	&i2c_s,
+	&ir_ctrl,
+	&i2c_m_d,
+	&i2c_m_c,
+	&i2c_m_b,
+	&i2c_m_a,
+	&acodec,
+	&otp,
+	&sd_emmc_a,
+	&usb_phy,
+	&usb_ctrl,
+	&sys_dspb,
+	&sys_dspa,
+	&dma,
+	&irq_ctrl,
+	&nic,
+	&gic,
+	&uart_c,
+	&uart_b,
+	&uart_a,
+	&sys_psram,
+	&rsa,
+	&coresight,
+	&am2axi_vad,
+	&audio_vad,
+	&axi_dmc,
+	&axi_psram,
+	&ramb,
+	&rama,
+	&axi_spifc,
+	&axi_nic,
+	&axi_dma,
+	&cpu_ctrl,
+	&rom,
+	&prod_i2c,
+	&dspa_sel,
+	&dspb_sel,
+	&dspa_en,
+	&dspa_en_nic,
+	&dspb_en,
+	&dspb_en_nic,
+	&rtc,
+	&ceca_32k_out,
+	&cecb_32k_out,
+	&clk_24m,
+	&clk_12m,
+	&fclk_div2_divn,
+	&gen,
+	&saradc_sel,
+	&saradc,
+	&pwm_a,
+	&pwm_b,
+	&pwm_c,
+	&pwm_d,
+	&pwm_e,
+	&pwm_f,
+	&spicc,
+	&ts,
+	&spifc,
+	&usb_bus,
+	&sd_emmc,
+	&psram,
+	&dmc,
+	&sys_a_sel,
+	&sys_a_div,
+	&sys_a,
+	&sys_b_sel,
+	&sys_b_div,
+	&sys_b,
+	&dspa_a_sel,
+	&dspa_a_div,
+	&dspa_a,
+	&dspa_b_sel,
+	&dspa_b_div,
+	&dspa_b,
+	&dspb_a_sel,
+	&dspb_a_div,
+	&dspb_a,
+	&dspb_b_sel,
+	&dspb_b_div,
+	&dspb_b,
+	&rtc_32k_in,
+	&rtc_32k_div,
+	&rtc_32k_xtal,
+	&rtc_32k_sel,
+	&cecb_32k_in,
+	&cecb_32k_div,
+	&cecb_32k_sel_pre,
+	&cecb_32k_sel,
+	&ceca_32k_in,
+	&ceca_32k_div,
+	&ceca_32k_sel_pre,
+	&ceca_32k_sel,
+	&fclk_div2_divn_pre,
+	&gen_sel,
+	&gen_div,
+	&saradc_div,
+	&pwm_a_sel,
+	&pwm_a_div,
+	&pwm_b_sel,
+	&pwm_b_div,
+	&pwm_c_sel,
+	&pwm_c_div,
+	&pwm_d_sel,
+	&pwm_d_div,
+	&pwm_e_sel,
+	&pwm_e_div,
+	&pwm_f_sel,
+	&pwm_f_div,
+	&spicc_sel,
+	&spicc_div,
+	&spicc_sel2,
+	&ts_div,
+	&spifc_sel,
+	&spifc_div,
+	&spifc_sel2,
+	&usb_bus_sel,
+	&usb_bus_div,
+	&sd_emmc_sel,
+	&sd_emmc_div,
+	&sd_emmc_sel2,
+	&psram_sel,
+	&psram_div,
+	&psram_sel2,
+	&dmc_sel,
+	&dmc_div,
+	&dmc_sel2,
+};
+
+static struct regmap_config a1_periphs_regmap_cfg = {
+	.reg_bits   = 32,
+	.val_bits   = 32,
+	.reg_stride = 4,
+};
+
+static int meson_a1_periphs_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	struct regmap *map;
+	int clkid, i, err;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base),
+				     "can't ioremap resource\n");
+
+	map = devm_regmap_init_mmio(dev, base, &a1_periphs_regmap_cfg);
+	if (IS_ERR(map))
+		return dev_err_probe(dev, PTR_ERR(map),
+				     "can't init regmap mmio region\n");
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(a1_periphs_regmaps); i++)
+		a1_periphs_regmaps[i]->map = map;
+
+	for (clkid = 0; clkid < a1_periphs_clks.num; clkid++) {
+		err = devm_clk_hw_register(dev, a1_periphs_clks.hws[clkid]);
+		if (err)
+			return dev_err_probe(dev, err,
+					     "clock[%d] registration failed\n",
+					     clkid);
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &a1_periphs_clks);
+}
+
+static const struct of_device_id a1_periphs_clkc_match_table[] = {
+	{ .compatible = "amlogic,a1-peripherals-clkc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, a1_periphs_clkc_match_table);
+
+static struct platform_driver a1_periphs_clkc_driver = {
+	.probe = meson_a1_periphs_probe,
+	.driver = {
+		.name = "a1-peripherals-clkc",
+		.of_match_table = a1_periphs_clkc_match_table,
+	},
+};
+
+module_platform_driver(a1_periphs_clkc_driver);
+MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>");
+MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/a1-peripherals.h b/drivers/clk/meson/a1-peripherals.h
new file mode 100644
index 000000000000..526fc9ba5c9f
--- /dev/null
+++ b/drivers/clk/meson/a1-peripherals.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Amlogic A1 Peripherals Clock Controller internals
+ *
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#ifndef __A1_PERIPHERALS_H
+#define __A1_PERIPHERALS_H
+
+/* peripherals clock controller register offset */
+#define SYS_OSCIN_CTRL		0x0
+#define RTC_BY_OSCIN_CTRL0	0x4
+#define RTC_BY_OSCIN_CTRL1	0x8
+#define RTC_CTRL		0xc
+#define SYS_CLK_CTRL0		0x10
+#define SYS_CLK_EN0		0x1c
+#define SYS_CLK_EN1		0x20
+#define AXI_CLK_EN		0x24
+#define DSPA_CLK_EN		0x28
+#define DSPB_CLK_EN		0x2c
+#define DSPA_CLK_CTRL0		0x30
+#define DSPB_CLK_CTRL0		0x34
+#define CLK12_24_CTRL		0x38
+#define GEN_CLK_CTRL		0x3c
+#define SAR_ADC_CLK_CTRL	0xc0
+#define PWM_CLK_AB_CTRL		0xc4
+#define PWM_CLK_CD_CTRL		0xc8
+#define PWM_CLK_EF_CTRL		0xcc
+#define SPICC_CLK_CTRL		0xd0
+#define TS_CLK_CTRL		0xd4
+#define SPIFC_CLK_CTRL		0xd8
+#define USB_BUSCLK_CTRL		0xdc
+#define SD_EMMC_CLK_CTRL	0xe0
+#define CECA_CLK_CTRL0		0xe4
+#define CECA_CLK_CTRL1		0xe8
+#define CECB_CLK_CTRL0		0xec
+#define CECB_CLK_CTRL1		0xf0
+#define PSRAM_CLK_CTRL		0xf4
+#define DMC_CLK_CTRL		0xf8
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
+
+/*
+ * CLKID index values for internal clocks
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/a1-peripherals-clkc.h.
+ * Only the clocks ids we don't want to expose, such as the internal muxes and
+ * dividers of composite clocks, will remain defined here.
+ */
+#define CLKID_XTAL_IN		0
+#define CLKID_DSPA_SEL		61
+#define CLKID_DSPB_SEL		62
+#define CLKID_SARADC_SEL	74
+#define CLKID_SYS_A_SEL		89
+#define CLKID_SYS_A_DIV		90
+#define CLKID_SYS_A		91
+#define CLKID_SYS_B_SEL		92
+#define CLKID_SYS_B_DIV		93
+#define CLKID_SYS_B		94
+#define CLKID_DSPA_A_DIV	96
+#define CLKID_DSPA_A		97
+#define CLKID_DSPA_B_DIV	99
+#define CLKID_DSPA_B		100
+#define CLKID_DSPB_A_DIV	102
+#define CLKID_DSPB_A		103
+#define CLKID_DSPB_B_DIV	105
+#define CLKID_DSPB_B		106
+#define CLKID_RTC_32K_IN	107
+#define CLKID_RTC_32K_DIV	108
+#define CLKID_RTC_32K_XTAL	109
+#define CLKID_RTC_32K_SEL	110
+#define CLKID_CECB_32K_IN	111
+#define CLKID_CECB_32K_DIV	112
+#define CLKID_CECA_32K_IN	115
+#define CLKID_CECA_32K_DIV	116
+#define CLKID_DIV2_PRE		119
+#define CLKID_24M_DIV2		120
+#define CLKID_GEN_DIV		122
+#define CLKID_SARADC_DIV	123
+#define CLKID_PWM_A_DIV		125
+#define CLKID_PWM_B_DIV		127
+#define CLKID_PWM_C_DIV		129
+#define CLKID_PWM_D_DIV		131
+#define CLKID_PWM_E_DIV		133
+#define CLKID_PWM_F_DIV		135
+#define CLKID_SPICC_SEL		136
+#define CLKID_SPICC_DIV		137
+#define CLKID_SPICC_SEL2	138
+#define CLKID_TS_DIV		139
+#define CLKID_SPIFC_SEL		140
+#define CLKID_SPIFC_DIV		141
+#define CLKID_SPIFC_SEL2	142
+#define CLKID_USB_BUS_SEL	143
+#define CLKID_USB_BUS_DIV	144
+#define CLKID_SD_EMMC_SEL	145
+#define CLKID_SD_EMMC_DIV	146
+#define CLKID_PSRAM_SEL		148
+#define CLKID_PSRAM_DIV		149
+#define CLKID_PSRAM_SEL2	150
+#define CLKID_DMC_SEL		151
+#define CLKID_DMC_DIV		152
+#define CLKID_DMC_SEL2		153
+#define NR_CLKS			154
+
+#endif /* __A1_PERIPHERALS_H */
-- 
2.36.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>,
	<mturquette@baylibre.com>, <sboyd@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<khilman@baylibre.com>, <martin.blumenstingl@googlemail.com>
Cc: <jian.hu@amlogic.com>, <kernel@sberdevices.ru>,
	<rockosov@gmail.com>, <linux-amlogic@lists.infradead.org>,
	<linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Dmitry Rokosov <ddrokosov@sberdevices.ru>
Subject: [PATCH v15 6/6] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver
Date: Wed, 17 May 2023 16:33:09 +0300	[thread overview]
Message-ID: <20230517133309.9874-7-ddrokosov@sberdevices.ru> (raw)
In-Reply-To: <20230517133309.9874-1-ddrokosov@sberdevices.ru>

Introduce Peripherals clock controller for Amlogic A1 SoC family.

A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU,
and Audio.
This patchset adds support for Amlogic A1 Peripherals clock driver and
allows to generate clocks for all A1 SoC peripheral IPs.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
---
 drivers/clk/meson/Kconfig          |   10 +
 drivers/clk/meson/Makefile         |    1 +
 drivers/clk/meson/a1-peripherals.c | 2273 ++++++++++++++++++++++++++++
 drivers/clk/meson/a1-peripherals.h |  113 ++
 4 files changed, 2397 insertions(+)
 create mode 100644 drivers/clk/meson/a1-peripherals.c
 create mode 100644 drivers/clk/meson/a1-peripherals.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 693c4cf60f27..8ce846fdbe43 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -109,6 +109,16 @@ config COMMON_CLK_A1_PLL
 	  device, A1 SoC Family. Say Y if you want A1 PLL clock controller
 	  to work.
 
+config COMMON_CLK_A1_PERIPHERALS
+	tristate "Amlogic A1 SoC Peripherals clock controller support"
+	depends on ARM64
+	select COMMON_CLK_MESON_DUALDIV
+	select COMMON_CLK_MESON_REGMAP
+	help
+	  Support for the Peripherals clock controller on Amlogic A113L based
+	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock
+	  controller to work.
+
 config COMMON_CLK_G12A
 	tristate "G12 and SM1 SoC clock controllers support"
 	depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 2f17f475a48f..d5288662881d 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
 obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
 obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
+obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
 obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
 obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c
new file mode 100644
index 000000000000..5e7a37cbbb88
--- /dev/null
+++ b/drivers/clk/meson/a1-peripherals.c
@@ -0,0 +1,2273 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "a1-peripherals.h"
+#include "clk-dualdiv.h"
+#include "clk-regmap.h"
+
+static struct clk_regmap xtal_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "xtal_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fixpll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "fixpll_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_phy_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 2,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_phy_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_ctrl_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 3,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_ctrl_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap hifipll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 4,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hifipll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap syspll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 5,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "syspll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap dds_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dds_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static const struct meson_clk_dualdiv_param clk_32k_div_table[] = {
+	{
+		.dual		= 1,
+		.n1		= 733,
+		.m1		= 8,
+		.n2		= 732,
+		.m2		= 11,
+	},
+	{}
+};
+
+static struct clk_regmap rtc_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_xtal = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL1,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_xtal",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = RTC_CTRL,
+		.mask = 0x3,
+		.shift = 0,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_xtal.hw,
+			&rtc_32k_div.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * All clocks that can be inherited from a more accurate RTC clock are marked
+ * with the CLK_SET_RATE_NO_REPARENT flag. This is because in certain
+ * situations, we may need to freeze their parent. The parent setup of these
+ * clocks should be located on the device tree side.
+ */
+struct clk_regmap rtc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_sys[] = { 0, 1, 2, 3, 7 };
+static const struct clk_parent_data sys_parents[] = {
+	{ .fw_name = "xtal" },
+	{ .fw_name = "fclk_div2" },
+	{ .fw_name = "fclk_div3" },
+	{ .fw_name = "fclk_div5" },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap sys_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a.hw,
+			&sys_b.hw,
+		},
+		.num_parents = 2,
+		/*
+		 * This clock is used by APB bus which is set in boot ROM code
+		 * and is required by the platform to operate correctly.
+		 * Until the following condition are met, we need this clock to
+		 * be marked as critical:
+		 * a) Mark the clock used by a firmware resource, if possible
+		 * b) CCF has a clock hand-off mechanism to make the sure the
+		 *    clock stays on until the proper driver comes along
+		 */
+		.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+	},
+};
+
+static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 };
+static const struct clk_parent_data dsp_ab_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap dspa_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a.hw,
+			&dspa_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a.hw,
+			&dspb_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap clk_24m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "24m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor clk_24m_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "24m_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap clk_12m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 10,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "12m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m_div2.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn_pre = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = CLK12_24_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn_pre",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "fclk_div2",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 12,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&fclk_div2_divn_pre.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver,
+ * the index 4 is the clock measurement source, it's not supported yet
+ */
+static u32 gen_table[] = { 0, 1, 3, 5, 6, 7, 8 };
+static const struct clk_parent_data gen_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &rtc.hw },
+	{ .fw_name = "hifi_pll", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "fclk_div7", },
+};
+
+static struct clk_regmap gen_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = GEN_CLK_CTRL,
+		.mask = 0xf,
+		.shift = 12,
+		.table = gen_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = gen_parent_data,
+		.num_parents = ARRAY_SIZE(gen_parent_data),
+		/*
+		 * The GEN clock can be connected to an external pad, so it
+		 * may be set up directly from the device tree. Additionally,
+		 * the GEN clock can be inherited from a more accurate RTC
+		 * clock, so in certain situations, it may be necessary
+		 * to freeze its parent.
+		 */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap gen_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = GEN_CLK_CTRL,
+		.shift = 0,
+		.width = 11,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gen = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = GEN_CLK_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gen",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .fw_name = "xtal", },
+			{ .hw = &sys.hw, },
+		},
+		.num_parents = 2,
+	},
+};
+
+static struct clk_regmap saradc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "saradc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_abcd_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_c",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_d",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_ef_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div5", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_e_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_e_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_e = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_e",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_f",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * spicc clk
+ *   fdiv2   |\         |\       _____
+ *  ---------| |---DIV--| |     |     |    spicc out
+ *  ---------| |        | |-----|GATE |---------
+ *     ..... |/         | /     |_____|
+ *  --------------------|/
+ *                 24M
+ */
+static const struct clk_parent_data spicc_spifc_parents[] = {
+	{ .fw_name = "fclk_div2"},
+	{ .fw_name = "fclk_div3"},
+	{ .fw_name = "fclk_div5"},
+	{ .fw_name = "hifi_pll" },
+};
+
+static struct clk_regmap spicc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spicc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPICC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spicc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPICC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ts_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = TS_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ts_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ts = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = TS_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ts",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ts_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spifc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPIFC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spifc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPIFC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spifc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data usb_bus_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+};
+
+static struct clk_regmap usb_bus_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = USB_BUSCLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = usb_bus_parents,
+		.num_parents = ARRAY_SIZE(usb_bus_parents),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = USB_BUSCLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = USB_BUSCLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_bus",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data sd_emmc_psram_dmc_parents[] = {
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+};
+
+static struct clk_regmap sd_emmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap sd_emmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &sd_emmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap psram_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PSRAM_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &psram_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PSRAM_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "psram",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap dmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &dmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dmc",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ceca_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_div.hw,
+			&ceca_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "cecb_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_div.hw,
+			&cecb_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+#define MESON_GATE(_name, _reg, _bit) \
+	MESON_PCLK(_name, _reg, _bit, &sys.hw)
+
+static MESON_GATE(clktree,	SYS_CLK_EN0,	0);
+static MESON_GATE(reset_ctrl,	SYS_CLK_EN0,	1);
+static MESON_GATE(analog_ctrl,	SYS_CLK_EN0,	2);
+static MESON_GATE(pwr_ctrl,	SYS_CLK_EN0,	3);
+static MESON_GATE(pad_ctrl,	SYS_CLK_EN0,	4);
+static MESON_GATE(sys_ctrl,	SYS_CLK_EN0,	5);
+static MESON_GATE(temp_sensor,	SYS_CLK_EN0,	6);
+static MESON_GATE(am2axi_dev,	SYS_CLK_EN0,	7);
+static MESON_GATE(spicc_b,	SYS_CLK_EN0,	8);
+static MESON_GATE(spicc_a,	SYS_CLK_EN0,	9);
+static MESON_GATE(msr,		SYS_CLK_EN0,	10);
+static MESON_GATE(audio,	SYS_CLK_EN0,	11);
+static MESON_GATE(jtag_ctrl,	SYS_CLK_EN0,	12);
+static MESON_GATE(saradc_en,	SYS_CLK_EN0,	13);
+static MESON_GATE(pwm_ef,	SYS_CLK_EN0,	14);
+static MESON_GATE(pwm_cd,	SYS_CLK_EN0,	15);
+static MESON_GATE(pwm_ab,	SYS_CLK_EN0,	16);
+static MESON_GATE(cec,		SYS_CLK_EN0,	17);
+static MESON_GATE(i2c_s,	SYS_CLK_EN0,	18);
+static MESON_GATE(ir_ctrl,	SYS_CLK_EN0,	19);
+static MESON_GATE(i2c_m_d,	SYS_CLK_EN0,	20);
+static MESON_GATE(i2c_m_c,	SYS_CLK_EN0,	21);
+static MESON_GATE(i2c_m_b,	SYS_CLK_EN0,	22);
+static MESON_GATE(i2c_m_a,	SYS_CLK_EN0,	23);
+static MESON_GATE(acodec,	SYS_CLK_EN0,	24);
+static MESON_GATE(otp,		SYS_CLK_EN0,	25);
+static MESON_GATE(sd_emmc_a,	SYS_CLK_EN0,	26);
+static MESON_GATE(usb_phy,	SYS_CLK_EN0,	27);
+static MESON_GATE(usb_ctrl,	SYS_CLK_EN0,	28);
+static MESON_GATE(sys_dspb,	SYS_CLK_EN0,	29);
+static MESON_GATE(sys_dspa,	SYS_CLK_EN0,	30);
+static MESON_GATE(dma,		SYS_CLK_EN0,	31);
+static MESON_GATE(irq_ctrl,	SYS_CLK_EN1,	0);
+static MESON_GATE(nic,		SYS_CLK_EN1,	1);
+static MESON_GATE(gic,		SYS_CLK_EN1,	2);
+static MESON_GATE(uart_c,	SYS_CLK_EN1,	3);
+static MESON_GATE(uart_b,	SYS_CLK_EN1,	4);
+static MESON_GATE(uart_a,	SYS_CLK_EN1,	5);
+static MESON_GATE(sys_psram,	SYS_CLK_EN1,	6);
+static MESON_GATE(rsa,		SYS_CLK_EN1,	8);
+static MESON_GATE(coresight,	SYS_CLK_EN1,	9);
+static MESON_GATE(am2axi_vad,	AXI_CLK_EN,	0);
+static MESON_GATE(audio_vad,	AXI_CLK_EN,	1);
+static MESON_GATE(axi_dmc,	AXI_CLK_EN,	3);
+static MESON_GATE(axi_psram,	AXI_CLK_EN,	4);
+static MESON_GATE(ramb,		AXI_CLK_EN,	5);
+static MESON_GATE(rama,		AXI_CLK_EN,	6);
+static MESON_GATE(axi_spifc,	AXI_CLK_EN,	7);
+static MESON_GATE(axi_nic,	AXI_CLK_EN,	8);
+static MESON_GATE(axi_dma,	AXI_CLK_EN,	9);
+static MESON_GATE(cpu_ctrl,	AXI_CLK_EN,	10);
+static MESON_GATE(rom,		AXI_CLK_EN,	11);
+static MESON_GATE(prod_i2c,	AXI_CLK_EN,	12);
+
+/* Array of all clocks registered by this provider */
+static struct clk_hw_onecell_data a1_periphs_clks = {
+	.hws = {
+		[CLKID_XTAL_IN]			= &xtal_in.hw,
+		[CLKID_FIXPLL_IN]		= &fixpll_in.hw,
+		[CLKID_USB_PHY_IN]		= &usb_phy_in.hw,
+		[CLKID_USB_CTRL_IN]		= &usb_ctrl_in.hw,
+		[CLKID_HIFIPLL_IN]		= &hifipll_in.hw,
+		[CLKID_SYSPLL_IN]		= &syspll_in.hw,
+		[CLKID_DDS_IN]			= &dds_in.hw,
+		[CLKID_SYS]			= &sys.hw,
+		[CLKID_CLKTREE]			= &clktree.hw,
+		[CLKID_RESET_CTRL]		= &reset_ctrl.hw,
+		[CLKID_ANALOG_CTRL]		= &analog_ctrl.hw,
+		[CLKID_PWR_CTRL]		= &pwr_ctrl.hw,
+		[CLKID_PAD_CTRL]		= &pad_ctrl.hw,
+		[CLKID_SYS_CTRL]		= &sys_ctrl.hw,
+		[CLKID_TEMP_SENSOR]		= &temp_sensor.hw,
+		[CLKID_AM2AXI_DIV]		= &am2axi_dev.hw,
+		[CLKID_SPICC_B]			= &spicc_b.hw,
+		[CLKID_SPICC_A]			= &spicc_a.hw,
+		[CLKID_MSR]			= &msr.hw,
+		[CLKID_AUDIO]			= &audio.hw,
+		[CLKID_JTAG_CTRL]		= &jtag_ctrl.hw,
+		[CLKID_SARADC_EN]		= &saradc_en.hw,
+		[CLKID_PWM_EF]			= &pwm_ef.hw,
+		[CLKID_PWM_CD]			= &pwm_cd.hw,
+		[CLKID_PWM_AB]			= &pwm_ab.hw,
+		[CLKID_CEC]			= &cec.hw,
+		[CLKID_I2C_S]			= &i2c_s.hw,
+		[CLKID_IR_CTRL]			= &ir_ctrl.hw,
+		[CLKID_I2C_M_D]			= &i2c_m_d.hw,
+		[CLKID_I2C_M_C]			= &i2c_m_c.hw,
+		[CLKID_I2C_M_B]			= &i2c_m_b.hw,
+		[CLKID_I2C_M_A]			= &i2c_m_a.hw,
+		[CLKID_ACODEC]			= &acodec.hw,
+		[CLKID_OTP]			= &otp.hw,
+		[CLKID_SD_EMMC_A]		= &sd_emmc_a.hw,
+		[CLKID_USB_PHY]			= &usb_phy.hw,
+		[CLKID_USB_CTRL]		= &usb_ctrl.hw,
+		[CLKID_SYS_DSPB]		= &sys_dspb.hw,
+		[CLKID_SYS_DSPA]		= &sys_dspa.hw,
+		[CLKID_DMA]			= &dma.hw,
+		[CLKID_IRQ_CTRL]		= &irq_ctrl.hw,
+		[CLKID_NIC]			= &nic.hw,
+		[CLKID_GIC]			= &gic.hw,
+		[CLKID_UART_C]			= &uart_c.hw,
+		[CLKID_UART_B]			= &uart_b.hw,
+		[CLKID_UART_A]			= &uart_a.hw,
+		[CLKID_SYS_PSRAM]		= &sys_psram.hw,
+		[CLKID_RSA]			= &rsa.hw,
+		[CLKID_CORESIGHT]		= &coresight.hw,
+		[CLKID_AM2AXI_VAD]		= &am2axi_vad.hw,
+		[CLKID_AUDIO_VAD]		= &audio_vad.hw,
+		[CLKID_AXI_DMC]			= &axi_dmc.hw,
+		[CLKID_AXI_PSRAM]		= &axi_psram.hw,
+		[CLKID_RAMB]			= &ramb.hw,
+		[CLKID_RAMA]			= &rama.hw,
+		[CLKID_AXI_SPIFC]		= &axi_spifc.hw,
+		[CLKID_AXI_NIC]			= &axi_nic.hw,
+		[CLKID_AXI_DMA]			= &axi_dma.hw,
+		[CLKID_CPU_CTRL]		= &cpu_ctrl.hw,
+		[CLKID_ROM]			= &rom.hw,
+		[CLKID_PROC_I2C]		= &prod_i2c.hw,
+		[CLKID_DSPA_SEL]		= &dspa_sel.hw,
+		[CLKID_DSPB_SEL]		= &dspb_sel.hw,
+		[CLKID_DSPA_EN]			= &dspa_en.hw,
+		[CLKID_DSPA_EN_NIC]		= &dspa_en_nic.hw,
+		[CLKID_DSPB_EN]			= &dspb_en.hw,
+		[CLKID_DSPB_EN_NIC]		= &dspb_en_nic.hw,
+		[CLKID_RTC]			= &rtc.hw,
+		[CLKID_CECA_32K]		= &ceca_32k_out.hw,
+		[CLKID_CECB_32K]		= &cecb_32k_out.hw,
+		[CLKID_24M]			= &clk_24m.hw,
+		[CLKID_12M]			= &clk_12m.hw,
+		[CLKID_FCLK_DIV2_DIVN]		= &fclk_div2_divn.hw,
+		[CLKID_GEN]			= &gen.hw,
+		[CLKID_SARADC_SEL]		= &saradc_sel.hw,
+		[CLKID_SARADC]			= &saradc.hw,
+		[CLKID_PWM_A]			= &pwm_a.hw,
+		[CLKID_PWM_B]			= &pwm_b.hw,
+		[CLKID_PWM_C]			= &pwm_c.hw,
+		[CLKID_PWM_D]			= &pwm_d.hw,
+		[CLKID_PWM_E]			= &pwm_e.hw,
+		[CLKID_PWM_F]			= &pwm_f.hw,
+		[CLKID_SPICC]			= &spicc.hw,
+		[CLKID_TS]			= &ts.hw,
+		[CLKID_SPIFC]			= &spifc.hw,
+		[CLKID_USB_BUS]			= &usb_bus.hw,
+		[CLKID_SD_EMMC]			= &sd_emmc.hw,
+		[CLKID_PSRAM]			= &psram.hw,
+		[CLKID_DMC]			= &dmc.hw,
+		[CLKID_SYS_A_SEL]		= &sys_a_sel.hw,
+		[CLKID_SYS_A_DIV]		= &sys_a_div.hw,
+		[CLKID_SYS_A]			= &sys_a.hw,
+		[CLKID_SYS_B_SEL]		= &sys_b_sel.hw,
+		[CLKID_SYS_B_DIV]		= &sys_b_div.hw,
+		[CLKID_SYS_B]			= &sys_b.hw,
+		[CLKID_DSPA_A_SEL]		= &dspa_a_sel.hw,
+		[CLKID_DSPA_A_DIV]		= &dspa_a_div.hw,
+		[CLKID_DSPA_A]			= &dspa_a.hw,
+		[CLKID_DSPA_B_SEL]		= &dspa_b_sel.hw,
+		[CLKID_DSPA_B_DIV]		= &dspa_b_div.hw,
+		[CLKID_DSPA_B]			= &dspa_b.hw,
+		[CLKID_DSPB_A_SEL]		= &dspb_a_sel.hw,
+		[CLKID_DSPB_A_DIV]		= &dspb_a_div.hw,
+		[CLKID_DSPB_A]			= &dspb_a.hw,
+		[CLKID_DSPB_B_SEL]		= &dspb_b_sel.hw,
+		[CLKID_DSPB_B_DIV]		= &dspb_b_div.hw,
+		[CLKID_DSPB_B]			= &dspb_b.hw,
+		[CLKID_RTC_32K_IN]		= &rtc_32k_in.hw,
+		[CLKID_RTC_32K_DIV]		= &rtc_32k_div.hw,
+		[CLKID_RTC_32K_XTAL]		= &rtc_32k_xtal.hw,
+		[CLKID_RTC_32K_SEL]		= &rtc_32k_sel.hw,
+		[CLKID_CECB_32K_IN]		= &cecb_32k_in.hw,
+		[CLKID_CECB_32K_DIV]		= &cecb_32k_div.hw,
+		[CLKID_CECB_32K_SEL_PRE]	= &cecb_32k_sel_pre.hw,
+		[CLKID_CECB_32K_SEL]		= &cecb_32k_sel.hw,
+		[CLKID_CECA_32K_IN]		= &ceca_32k_in.hw,
+		[CLKID_CECA_32K_DIV]		= &ceca_32k_div.hw,
+		[CLKID_CECA_32K_SEL_PRE]	= &ceca_32k_sel_pre.hw,
+		[CLKID_CECA_32K_SEL]		= &ceca_32k_sel.hw,
+		[CLKID_DIV2_PRE]		= &fclk_div2_divn_pre.hw,
+		[CLKID_24M_DIV2]		= &clk_24m_div2.hw,
+		[CLKID_GEN_SEL]			= &gen_sel.hw,
+		[CLKID_GEN_DIV]			= &gen_div.hw,
+		[CLKID_SARADC_DIV]		= &saradc_div.hw,
+		[CLKID_PWM_A_SEL]		= &pwm_a_sel.hw,
+		[CLKID_PWM_A_DIV]		= &pwm_a_div.hw,
+		[CLKID_PWM_B_SEL]		= &pwm_b_sel.hw,
+		[CLKID_PWM_B_DIV]		= &pwm_b_div.hw,
+		[CLKID_PWM_C_SEL]		= &pwm_c_sel.hw,
+		[CLKID_PWM_C_DIV]		= &pwm_c_div.hw,
+		[CLKID_PWM_D_SEL]		= &pwm_d_sel.hw,
+		[CLKID_PWM_D_DIV]		= &pwm_d_div.hw,
+		[CLKID_PWM_E_SEL]		= &pwm_e_sel.hw,
+		[CLKID_PWM_E_DIV]		= &pwm_e_div.hw,
+		[CLKID_PWM_F_SEL]		= &pwm_f_sel.hw,
+		[CLKID_PWM_F_DIV]		= &pwm_f_div.hw,
+		[CLKID_SPICC_SEL]		= &spicc_sel.hw,
+		[CLKID_SPICC_DIV]		= &spicc_div.hw,
+		[CLKID_SPICC_SEL2]		= &spicc_sel2.hw,
+		[CLKID_TS_DIV]			= &ts_div.hw,
+		[CLKID_SPIFC_SEL]		= &spifc_sel.hw,
+		[CLKID_SPIFC_DIV]		= &spifc_div.hw,
+		[CLKID_SPIFC_SEL2]		= &spifc_sel2.hw,
+		[CLKID_USB_BUS_SEL]		= &usb_bus_sel.hw,
+		[CLKID_USB_BUS_DIV]		= &usb_bus_div.hw,
+		[CLKID_SD_EMMC_SEL]		= &sd_emmc_sel.hw,
+		[CLKID_SD_EMMC_DIV]		= &sd_emmc_div.hw,
+		[CLKID_SD_EMMC_SEL2]		= &sd_emmc_sel2.hw,
+		[CLKID_PSRAM_SEL]		= &psram_sel.hw,
+		[CLKID_PSRAM_DIV]		= &psram_div.hw,
+		[CLKID_PSRAM_SEL2]		= &psram_sel2.hw,
+		[CLKID_DMC_SEL]			= &dmc_sel.hw,
+		[CLKID_DMC_DIV]			= &dmc_div.hw,
+		[CLKID_DMC_SEL2]		= &dmc_sel2.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const a1_periphs_regmaps[] = {
+	&xtal_in,
+	&fixpll_in,
+	&usb_phy_in,
+	&usb_ctrl_in,
+	&hifipll_in,
+	&syspll_in,
+	&dds_in,
+	&sys,
+	&clktree,
+	&reset_ctrl,
+	&analog_ctrl,
+	&pwr_ctrl,
+	&pad_ctrl,
+	&sys_ctrl,
+	&temp_sensor,
+	&am2axi_dev,
+	&spicc_b,
+	&spicc_a,
+	&msr,
+	&audio,
+	&jtag_ctrl,
+	&saradc_en,
+	&pwm_ef,
+	&pwm_cd,
+	&pwm_ab,
+	&cec,
+	&i2c_s,
+	&ir_ctrl,
+	&i2c_m_d,
+	&i2c_m_c,
+	&i2c_m_b,
+	&i2c_m_a,
+	&acodec,
+	&otp,
+	&sd_emmc_a,
+	&usb_phy,
+	&usb_ctrl,
+	&sys_dspb,
+	&sys_dspa,
+	&dma,
+	&irq_ctrl,
+	&nic,
+	&gic,
+	&uart_c,
+	&uart_b,
+	&uart_a,
+	&sys_psram,
+	&rsa,
+	&coresight,
+	&am2axi_vad,
+	&audio_vad,
+	&axi_dmc,
+	&axi_psram,
+	&ramb,
+	&rama,
+	&axi_spifc,
+	&axi_nic,
+	&axi_dma,
+	&cpu_ctrl,
+	&rom,
+	&prod_i2c,
+	&dspa_sel,
+	&dspb_sel,
+	&dspa_en,
+	&dspa_en_nic,
+	&dspb_en,
+	&dspb_en_nic,
+	&rtc,
+	&ceca_32k_out,
+	&cecb_32k_out,
+	&clk_24m,
+	&clk_12m,
+	&fclk_div2_divn,
+	&gen,
+	&saradc_sel,
+	&saradc,
+	&pwm_a,
+	&pwm_b,
+	&pwm_c,
+	&pwm_d,
+	&pwm_e,
+	&pwm_f,
+	&spicc,
+	&ts,
+	&spifc,
+	&usb_bus,
+	&sd_emmc,
+	&psram,
+	&dmc,
+	&sys_a_sel,
+	&sys_a_div,
+	&sys_a,
+	&sys_b_sel,
+	&sys_b_div,
+	&sys_b,
+	&dspa_a_sel,
+	&dspa_a_div,
+	&dspa_a,
+	&dspa_b_sel,
+	&dspa_b_div,
+	&dspa_b,
+	&dspb_a_sel,
+	&dspb_a_div,
+	&dspb_a,
+	&dspb_b_sel,
+	&dspb_b_div,
+	&dspb_b,
+	&rtc_32k_in,
+	&rtc_32k_div,
+	&rtc_32k_xtal,
+	&rtc_32k_sel,
+	&cecb_32k_in,
+	&cecb_32k_div,
+	&cecb_32k_sel_pre,
+	&cecb_32k_sel,
+	&ceca_32k_in,
+	&ceca_32k_div,
+	&ceca_32k_sel_pre,
+	&ceca_32k_sel,
+	&fclk_div2_divn_pre,
+	&gen_sel,
+	&gen_div,
+	&saradc_div,
+	&pwm_a_sel,
+	&pwm_a_div,
+	&pwm_b_sel,
+	&pwm_b_div,
+	&pwm_c_sel,
+	&pwm_c_div,
+	&pwm_d_sel,
+	&pwm_d_div,
+	&pwm_e_sel,
+	&pwm_e_div,
+	&pwm_f_sel,
+	&pwm_f_div,
+	&spicc_sel,
+	&spicc_div,
+	&spicc_sel2,
+	&ts_div,
+	&spifc_sel,
+	&spifc_div,
+	&spifc_sel2,
+	&usb_bus_sel,
+	&usb_bus_div,
+	&sd_emmc_sel,
+	&sd_emmc_div,
+	&sd_emmc_sel2,
+	&psram_sel,
+	&psram_div,
+	&psram_sel2,
+	&dmc_sel,
+	&dmc_div,
+	&dmc_sel2,
+};
+
+static struct regmap_config a1_periphs_regmap_cfg = {
+	.reg_bits   = 32,
+	.val_bits   = 32,
+	.reg_stride = 4,
+};
+
+static int meson_a1_periphs_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	struct regmap *map;
+	int clkid, i, err;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base),
+				     "can't ioremap resource\n");
+
+	map = devm_regmap_init_mmio(dev, base, &a1_periphs_regmap_cfg);
+	if (IS_ERR(map))
+		return dev_err_probe(dev, PTR_ERR(map),
+				     "can't init regmap mmio region\n");
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(a1_periphs_regmaps); i++)
+		a1_periphs_regmaps[i]->map = map;
+
+	for (clkid = 0; clkid < a1_periphs_clks.num; clkid++) {
+		err = devm_clk_hw_register(dev, a1_periphs_clks.hws[clkid]);
+		if (err)
+			return dev_err_probe(dev, err,
+					     "clock[%d] registration failed\n",
+					     clkid);
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &a1_periphs_clks);
+}
+
+static const struct of_device_id a1_periphs_clkc_match_table[] = {
+	{ .compatible = "amlogic,a1-peripherals-clkc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, a1_periphs_clkc_match_table);
+
+static struct platform_driver a1_periphs_clkc_driver = {
+	.probe = meson_a1_periphs_probe,
+	.driver = {
+		.name = "a1-peripherals-clkc",
+		.of_match_table = a1_periphs_clkc_match_table,
+	},
+};
+
+module_platform_driver(a1_periphs_clkc_driver);
+MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>");
+MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/a1-peripherals.h b/drivers/clk/meson/a1-peripherals.h
new file mode 100644
index 000000000000..526fc9ba5c9f
--- /dev/null
+++ b/drivers/clk/meson/a1-peripherals.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Amlogic A1 Peripherals Clock Controller internals
+ *
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#ifndef __A1_PERIPHERALS_H
+#define __A1_PERIPHERALS_H
+
+/* peripherals clock controller register offset */
+#define SYS_OSCIN_CTRL		0x0
+#define RTC_BY_OSCIN_CTRL0	0x4
+#define RTC_BY_OSCIN_CTRL1	0x8
+#define RTC_CTRL		0xc
+#define SYS_CLK_CTRL0		0x10
+#define SYS_CLK_EN0		0x1c
+#define SYS_CLK_EN1		0x20
+#define AXI_CLK_EN		0x24
+#define DSPA_CLK_EN		0x28
+#define DSPB_CLK_EN		0x2c
+#define DSPA_CLK_CTRL0		0x30
+#define DSPB_CLK_CTRL0		0x34
+#define CLK12_24_CTRL		0x38
+#define GEN_CLK_CTRL		0x3c
+#define SAR_ADC_CLK_CTRL	0xc0
+#define PWM_CLK_AB_CTRL		0xc4
+#define PWM_CLK_CD_CTRL		0xc8
+#define PWM_CLK_EF_CTRL		0xcc
+#define SPICC_CLK_CTRL		0xd0
+#define TS_CLK_CTRL		0xd4
+#define SPIFC_CLK_CTRL		0xd8
+#define USB_BUSCLK_CTRL		0xdc
+#define SD_EMMC_CLK_CTRL	0xe0
+#define CECA_CLK_CTRL0		0xe4
+#define CECA_CLK_CTRL1		0xe8
+#define CECB_CLK_CTRL0		0xec
+#define CECB_CLK_CTRL1		0xf0
+#define PSRAM_CLK_CTRL		0xf4
+#define DMC_CLK_CTRL		0xf8
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
+
+/*
+ * CLKID index values for internal clocks
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/a1-peripherals-clkc.h.
+ * Only the clocks ids we don't want to expose, such as the internal muxes and
+ * dividers of composite clocks, will remain defined here.
+ */
+#define CLKID_XTAL_IN		0
+#define CLKID_DSPA_SEL		61
+#define CLKID_DSPB_SEL		62
+#define CLKID_SARADC_SEL	74
+#define CLKID_SYS_A_SEL		89
+#define CLKID_SYS_A_DIV		90
+#define CLKID_SYS_A		91
+#define CLKID_SYS_B_SEL		92
+#define CLKID_SYS_B_DIV		93
+#define CLKID_SYS_B		94
+#define CLKID_DSPA_A_DIV	96
+#define CLKID_DSPA_A		97
+#define CLKID_DSPA_B_DIV	99
+#define CLKID_DSPA_B		100
+#define CLKID_DSPB_A_DIV	102
+#define CLKID_DSPB_A		103
+#define CLKID_DSPB_B_DIV	105
+#define CLKID_DSPB_B		106
+#define CLKID_RTC_32K_IN	107
+#define CLKID_RTC_32K_DIV	108
+#define CLKID_RTC_32K_XTAL	109
+#define CLKID_RTC_32K_SEL	110
+#define CLKID_CECB_32K_IN	111
+#define CLKID_CECB_32K_DIV	112
+#define CLKID_CECA_32K_IN	115
+#define CLKID_CECA_32K_DIV	116
+#define CLKID_DIV2_PRE		119
+#define CLKID_24M_DIV2		120
+#define CLKID_GEN_DIV		122
+#define CLKID_SARADC_DIV	123
+#define CLKID_PWM_A_DIV		125
+#define CLKID_PWM_B_DIV		127
+#define CLKID_PWM_C_DIV		129
+#define CLKID_PWM_D_DIV		131
+#define CLKID_PWM_E_DIV		133
+#define CLKID_PWM_F_DIV		135
+#define CLKID_SPICC_SEL		136
+#define CLKID_SPICC_DIV		137
+#define CLKID_SPICC_SEL2	138
+#define CLKID_TS_DIV		139
+#define CLKID_SPIFC_SEL		140
+#define CLKID_SPIFC_DIV		141
+#define CLKID_SPIFC_SEL2	142
+#define CLKID_USB_BUS_SEL	143
+#define CLKID_USB_BUS_DIV	144
+#define CLKID_SD_EMMC_SEL	145
+#define CLKID_SD_EMMC_DIV	146
+#define CLKID_PSRAM_SEL		148
+#define CLKID_PSRAM_DIV		149
+#define CLKID_PSRAM_SEL2	150
+#define CLKID_DMC_SEL		151
+#define CLKID_DMC_DIV		152
+#define CLKID_DMC_SEL2		153
+#define NR_CLKS			154
+
+#endif /* __A1_PERIPHERALS_H */
-- 
2.36.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2023-05-17 13:33 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-17 13:33 [PATCH v15 0/6] add Amlogic A1 clock controller drivers Dmitry Rokosov
2023-05-17 13:33 ` Dmitry Rokosov
2023-05-17 13:33 ` Dmitry Rokosov
2023-05-17 13:33 ` [PATCH v15 1/6] clk: meson: make pll rst bit as optional Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-17 13:33 ` [PATCH v15 2/6] clk: meson: introduce new pll power-on sequence for A1 SoC family Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-17 13:33 ` [PATCH v15 3/6] dt-bindings: clock: meson: add A1 PLL clock controller bindings Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-17 13:33 ` [PATCH v15 4/6] clk: meson: a1: add Amlogic A1 PLL clock controller driver Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-17 13:33 ` [PATCH v15 5/6] dt-bindings: clock: meson: add A1 Peripherals clock controller bindings Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-19 21:09   ` Martin Blumenstingl
2023-05-19 21:09     ` Martin Blumenstingl
2023-05-19 21:09     ` Martin Blumenstingl
2023-05-22 13:00     ` Dmitry Rokosov
2023-05-22 13:00       ` Dmitry Rokosov
2023-05-22 13:00       ` Dmitry Rokosov
2023-05-29 20:38       ` Martin Blumenstingl
2023-05-29 20:38         ` Martin Blumenstingl
2023-05-29 20:38         ` Martin Blumenstingl
2023-05-30  8:56         ` Jerome Brunet
2023-05-30  8:56           ` Jerome Brunet
2023-05-30  8:56           ` Jerome Brunet
2023-05-30  9:34         ` Conor Dooley
2023-05-30  9:34           ` Conor Dooley
2023-05-30  9:34           ` Conor Dooley
2023-05-30 16:03           ` Dmitry Rokosov
2023-05-30 16:03             ` Dmitry Rokosov
2023-05-30 16:03             ` Dmitry Rokosov
2023-05-30 19:55             ` Martin Blumenstingl
2023-05-30 19:55               ` Martin Blumenstingl
2023-05-30 19:55               ` Martin Blumenstingl
2023-05-17 13:33 ` Dmitry Rokosov [this message]
2023-05-17 13:33   ` [PATCH v15 6/6] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver Dmitry Rokosov
2023-05-17 13:33   ` Dmitry Rokosov
2023-05-19 21:03   ` Martin Blumenstingl
2023-05-19 21:03     ` Martin Blumenstingl
2023-05-19 21:03     ` Martin Blumenstingl
2023-05-22 13:32     ` Dmitry Rokosov
2023-05-22 13:32       ` Dmitry Rokosov
2023-05-22 13:32       ` Dmitry Rokosov
2023-05-30  8:32       ` Jerome Brunet
2023-05-30  8:32         ` Jerome Brunet
2023-05-30  8:32         ` Jerome Brunet
2023-05-30 12:06         ` Dmitry Rokosov
2023-05-30 12:06           ` Dmitry Rokosov
2023-05-30 12:06           ` Dmitry Rokosov
2023-05-30 16:14 ` [PATCH v15 0/6] add Amlogic A1 clock controller drivers Jerome Brunet
2023-05-30 16:14   ` Jerome Brunet
2023-05-30 16:14   ` Jerome Brunet
2023-05-30 16:49   ` Dmitry Rokosov
2023-05-30 16:49     ` Dmitry Rokosov
2023-05-30 16:49     ` Dmitry Rokosov
2023-05-30 17:24     ` Dmitry Rokosov
2023-05-30 17:24       ` Dmitry Rokosov
2023-05-30 17:24       ` Dmitry Rokosov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230517133309.9874-7-ddrokosov@sberdevices.ru \
    --to=ddrokosov@sberdevices.ru \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=jian.hu@amlogic.com \
    --cc=kernel@sberdevices.ru \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=rockosov@gmail.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.