All of lore.kernel.org
 help / color / mirror / Atom feed
From: <marius.cristea@microchip.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <robh+dt@kernel.org>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <marius.cristea@microchip.com>
Subject: [PATCH 1/2] dt-bindings: iio: adc: adding MCP3564 ADC
Date: Fri, 19 May 2023 19:01:44 +0300	[thread overview]
Message-ID: <20230519160145.44208-2-marius.cristea@microchip.com> (raw)
In-Reply-To: <20230519160145.44208-1-marius.cristea@microchip.com>

From: Marius Cristea <marius.cristea@microchip.com>

This is the device tree schema for iio driver for
Microchip family of 153.6 ksps, Low-Noise 16/24-Bit
Delta-Sigma ADCs with an SPI interface.

Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
---
 .../bindings/iio/adc/microchip,mcp3564.yaml   | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
new file mode 100644
index 000000000000..407a125e3776
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP346X and MCP356X ADC Family
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+   Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit
+   Delta-Sigma ADCs with an SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3461
+      - microchip,mcp3462
+      - microchip,mcp3464
+      - microchip,mcp3461r
+      - microchip,mcp3462r
+      - microchip,mcp3464r
+      - microchip,mcp3561
+      - microchip,mcp3562
+      - microchip,mcp3564
+      - microchip,mcp3561r
+      - microchip,mcp3562r
+      - microchip,mcp3564r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  vref-supply:
+    description:
+      Some devices have a specific reference voltage supplied on a different
+      pin to the other supplies. Needed to be able to establish channel scaling
+      unless there is also an internal reference available (e.g. mcp3564r)
+
+  microchip,hw-device-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description:
+      The address is set on a per-device basis by fuses in the factory,
+      configured on request. If not requested, the fuses are set for 0x1.
+      The device address is part of the device markings to avoid
+      potential confusion. This address is coded on two bits, so four possible
+      addresses are available when multiple devices are present on the same
+      SPI bus with only one Chip Select line for all devices.
+
+  "#io-channel-cells":
+    const: 1
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+required:
+  - compatible
+  - microchip,hw-device-address
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "microchip,mcp3564r";
+            reg = <0>;
+            vref-supply = <&vref_reg>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <10000000>;
+            microchip,hw-device-address = <1>;
+        };
+    };
+...
-- 
2.34.1


  reply	other threads:[~2023-05-19 16:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-19 16:01 [PATCH 0/2] Adding support for Microchip MCP3564 ADC family marius.cristea
2023-05-19 16:01 ` marius.cristea [this message]
2023-05-19 18:29   ` [PATCH 1/2] dt-bindings: iio: adc: adding MCP3564 ADC Conor Dooley
2023-05-20 15:17     ` Jonathan Cameron
2023-06-08 19:34       ` Rob Herring
2023-06-09 17:41         ` Jonathan Cameron
2023-05-20 13:20   ` Jonathan Cameron
2023-05-24 10:37   ` Mike Looijmans
2023-05-28 19:16     ` Jonathan Cameron
2023-05-19 16:01 ` [PATCH 2/2] iio: adc: adding support for " marius.cristea
2023-05-20 15:15   ` Jonathan Cameron
2023-06-22 11:32     ` Marius.Cristea
2023-07-02 10:28       ` Jonathan Cameron
2023-05-24 11:05   ` Mike Looijmans
2023-05-28 19:20     ` Jonathan Cameron
2023-06-20 14:34       ` Mike Looijmans

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230519160145.44208-2-marius.cristea@microchip.com \
    --to=marius.cristea@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.