* [PATCH] arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
@ 2023-05-24 19:20 ` Shenwei Wang
0 siblings, 0 replies; 4+ messages in thread
From: Shenwei Wang @ 2023-05-24 19:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer
Cc: Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-arm-kernel, imx, Shenwei Wang
This patch adds the assigned-clocks and assigned-clock-rates properties
for the LPUARTx nodes. Without these properties, the default clock rate
used would be 0, which can cause the UART ports to fail when open.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 2dce8f2ee3ea..adb98a72bdfd 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -90,6 +90,8 @@ lpuart0: serial@5a060000 {
clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
<&uart0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_0>;
status = "disabled";
};
@@ -100,6 +102,8 @@ lpuart1: serial@5a070000 {
clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
<&uart1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_1>;
status = "disabled";
};
@@ -110,6 +114,8 @@ lpuart2: serial@5a080000 {
clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
<&uart2_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_2>;
status = "disabled";
};
@@ -120,6 +126,8 @@ lpuart3: serial@5a090000 {
clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
<&uart3_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_3>;
status = "disabled";
};
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
@ 2023-05-24 19:20 ` Shenwei Wang
0 siblings, 0 replies; 4+ messages in thread
From: Shenwei Wang @ 2023-05-24 19:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo, Sascha Hauer
Cc: Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-arm-kernel, imx, Shenwei Wang
This patch adds the assigned-clocks and assigned-clock-rates properties
for the LPUARTx nodes. Without these properties, the default clock rate
used would be 0, which can cause the UART ports to fail when open.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 2dce8f2ee3ea..adb98a72bdfd 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -90,6 +90,8 @@ lpuart0: serial@5a060000 {
clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
<&uart0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_0>;
status = "disabled";
};
@@ -100,6 +102,8 @@ lpuart1: serial@5a070000 {
clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
<&uart1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_1>;
status = "disabled";
};
@@ -110,6 +114,8 @@ lpuart2: serial@5a080000 {
clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
<&uart2_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_2>;
status = "disabled";
};
@@ -120,6 +126,8 @@ lpuart3: serial@5a090000 {
clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
<&uart3_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_3>;
status = "disabled";
};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
2023-05-24 19:20 ` Shenwei Wang
@ 2023-05-25 14:53 ` Fabio Estevam
-1 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2023-05-25 14:53 UTC (permalink / raw)
To: Shenwei Wang
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, NXP Linux Team,
devicetree, linux-arm-kernel, imx
On Wed, May 24, 2023 at 4:20 PM Shenwei Wang <shenwei.wang@nxp.com> wrote:
>
> This patch adds the assigned-clocks and assigned-clock-rates properties
Replace "This patch adds" with "Add".
> for the LPUARTx nodes. Without these properties, the default clock rate
> used would be 0, which can cause the UART ports to fail when open.
Fixes tag?
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
@ 2023-05-25 14:53 ` Fabio Estevam
0 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2023-05-25 14:53 UTC (permalink / raw)
To: Shenwei Wang
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, NXP Linux Team,
devicetree, linux-arm-kernel, imx
On Wed, May 24, 2023 at 4:20 PM Shenwei Wang <shenwei.wang@nxp.com> wrote:
>
> This patch adds the assigned-clocks and assigned-clock-rates properties
Replace "This patch adds" with "Add".
> for the LPUARTx nodes. Without these properties, the default clock rate
> used would be 0, which can cause the UART ports to fail when open.
Fixes tag?
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-05-25 14:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-24 19:20 [PATCH] arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts Shenwei Wang
2023-05-24 19:20 ` Shenwei Wang
2023-05-25 14:53 ` Fabio Estevam
2023-05-25 14:53 ` Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.