* [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
This patch series adds support for the Samsung Galaxy Express SGH-I437.
Currently the following things work on this phone: UART, eMMC, SD Card, and
USB.
version 5:
- use enum instead of anyOf in qcom,usb-hs-phy.yaml
version 4:
- Rebase onto rc1
- Fix qcom,usb-hs-phy.yaml patch so it doesn't break other devices
version 3:
- Added Ack
- Fixed compatible in qcom,usb-hs-phy.yaml. `make dt_binding_check dtbs_check`
no longer complains about USB
- Fixed formatting in qcom-msm8960.dtsi and qcom-msm8960-samsung-expressatt.dts
- Fixed the spi1_default node in qcom-msm8960-samsung-expressatt.dts.
`make dt_binding_check dtbs_check` no longer complains
version 2:
- Combined patch 1 into patch 4, as the sleep_clk label is specifically needed
for the USB node.
- Reformatted the commit messages to align with the style used in other commit
messages that modify the same files.
- Included a cover letter to provide an overview of the patch series.
- Slight refactoring of the device tree source (DTS) file.
Rudraksha Gupta (4):
dt-bindings: arm: qcom: Add Samsung Galaxy Express
dt-bindings: phy: qcom,usb-hs-phy: Add compatible
ARM: dts: qcom: msm8960: Add USB node
ARM: dts: qcom: Add Samsung Galaxy Express support
.../devicetree/bindings/arm/qcom.yaml | 1 +
.../bindings/phy/qcom,usb-hs-phy.yaml | 5 +-
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-msm8960-samsung-expressatt.dts | 331 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8960.dtsi | 34 +-
5 files changed, 370 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
--
2.34.1
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
This patch series adds support for the Samsung Galaxy Express SGH-I437.
Currently the following things work on this phone: UART, eMMC, SD Card, and
USB.
version 5:
- use enum instead of anyOf in qcom,usb-hs-phy.yaml
version 4:
- Rebase onto rc1
- Fix qcom,usb-hs-phy.yaml patch so it doesn't break other devices
version 3:
- Added Ack
- Fixed compatible in qcom,usb-hs-phy.yaml. `make dt_binding_check dtbs_check`
no longer complains about USB
- Fixed formatting in qcom-msm8960.dtsi and qcom-msm8960-samsung-expressatt.dts
- Fixed the spi1_default node in qcom-msm8960-samsung-expressatt.dts.
`make dt_binding_check dtbs_check` no longer complains
version 2:
- Combined patch 1 into patch 4, as the sleep_clk label is specifically needed
for the USB node.
- Reformatted the commit messages to align with the style used in other commit
messages that modify the same files.
- Included a cover letter to provide an overview of the patch series.
- Slight refactoring of the device tree source (DTS) file.
Rudraksha Gupta (4):
dt-bindings: arm: qcom: Add Samsung Galaxy Express
dt-bindings: phy: qcom,usb-hs-phy: Add compatible
ARM: dts: qcom: msm8960: Add USB node
ARM: dts: qcom: Add Samsung Galaxy Express support
.../devicetree/bindings/arm/qcom.yaml | 1 +
.../bindings/phy/qcom,usb-hs-phy.yaml | 5 +-
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-msm8960-samsung-expressatt.dts | 331 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8960.dtsi | 34 +-
5 files changed, 370 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
This patch series adds support for the Samsung Galaxy Express SGH-I437.
Currently the following things work on this phone: UART, eMMC, SD Card, and
USB.
version 5:
- use enum instead of anyOf in qcom,usb-hs-phy.yaml
version 4:
- Rebase onto rc1
- Fix qcom,usb-hs-phy.yaml patch so it doesn't break other devices
version 3:
- Added Ack
- Fixed compatible in qcom,usb-hs-phy.yaml. `make dt_binding_check dtbs_check`
no longer complains about USB
- Fixed formatting in qcom-msm8960.dtsi and qcom-msm8960-samsung-expressatt.dts
- Fixed the spi1_default node in qcom-msm8960-samsung-expressatt.dts.
`make dt_binding_check dtbs_check` no longer complains
version 2:
- Combined patch 1 into patch 4, as the sleep_clk label is specifically needed
for the USB node.
- Reformatted the commit messages to align with the style used in other commit
messages that modify the same files.
- Included a cover letter to provide an overview of the patch series.
- Slight refactoring of the device tree source (DTS) file.
Rudraksha Gupta (4):
dt-bindings: arm: qcom: Add Samsung Galaxy Express
dt-bindings: phy: qcom,usb-hs-phy: Add compatible
ARM: dts: qcom: msm8960: Add USB node
ARM: dts: qcom: Add Samsung Galaxy Express support
.../devicetree/bindings/arm/qcom.yaml | 1 +
.../bindings/phy/qcom,usb-hs-phy.yaml | 5 +-
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-msm8960-samsung-expressatt.dts | 331 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8960.dtsi | 34 +-
5 files changed, 370 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v5 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express
2023-06-07 5:00 ` Rudraksha Gupta
(?)
@ 2023-06-07 5:00 ` Rudraksha Gupta
-1 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel, linux-phy, linux-arm-kernel
Add a compatible for Samsung Galaxy Express SGH-I437.
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index d9dd25695c3d..133d69b2b73d 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -191,6 +191,7 @@ properties:
- items:
- enum:
- qcom,msm8960-cdp
+ - samsung,expressatt
- const: qcom,msm8960
- items:
--
2.34.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel, linux-phy, linux-arm-kernel
Add a compatible for Samsung Galaxy Express SGH-I437.
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index d9dd25695c3d..133d69b2b73d 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -191,6 +191,7 @@ properties:
- items:
- enum:
- qcom,msm8960-cdp
+ - samsung,expressatt
- const: qcom,msm8960
- items:
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel, linux-phy, linux-arm-kernel
Add a compatible for Samsung Galaxy Express SGH-I437.
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index d9dd25695c3d..133d69b2b73d 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -191,6 +191,7 @@ properties:
- items:
- enum:
- qcom,msm8960-cdp
+ - samsung,expressatt
- const: qcom,msm8960
- items:
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
2023-06-07 5:00 ` Rudraksha Gupta
(?)
@ 2023-06-07 5:00 ` Rudraksha Gupta
-1 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
Adds qcom,usb-hs-phy-msm8960 compatible
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
index aa97478dd016..f042d6af1594 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -13,7 +13,9 @@ if:
properties:
compatible:
contains:
- const: qcom,usb-hs-phy-apq8064
+ enum:
+ - qcom,usb-hs-phy-apq8064
+ - qcom,usb-hs-phy-msm8960
then:
properties:
resets:
@@ -40,6 +42,7 @@ properties:
- qcom,usb-hs-phy-apq8064
- qcom,usb-hs-phy-msm8226
- qcom,usb-hs-phy-msm8916
+ - qcom,usb-hs-phy-msm8960
- qcom,usb-hs-phy-msm8974
- const: qcom,usb-hs-phy
--
2.34.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
Adds qcom,usb-hs-phy-msm8960 compatible
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
index aa97478dd016..f042d6af1594 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -13,7 +13,9 @@ if:
properties:
compatible:
contains:
- const: qcom,usb-hs-phy-apq8064
+ enum:
+ - qcom,usb-hs-phy-apq8064
+ - qcom,usb-hs-phy-msm8960
then:
properties:
resets:
@@ -40,6 +42,7 @@ properties:
- qcom,usb-hs-phy-apq8064
- qcom,usb-hs-phy-msm8226
- qcom,usb-hs-phy-msm8916
+ - qcom,usb-hs-phy-msm8960
- qcom,usb-hs-phy-msm8974
- const: qcom,usb-hs-phy
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
Adds qcom,usb-hs-phy-msm8960 compatible
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
index aa97478dd016..f042d6af1594 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -13,7 +13,9 @@ if:
properties:
compatible:
contains:
- const: qcom,usb-hs-phy-apq8064
+ enum:
+ - qcom,usb-hs-phy-apq8064
+ - qcom,usb-hs-phy-msm8960
then:
properties:
resets:
@@ -40,6 +42,7 @@ properties:
- qcom,usb-hs-phy-apq8064
- qcom,usb-hs-phy-msm8226
- qcom,usb-hs-phy-msm8916
+ - qcom,usb-hs-phy-msm8960
- qcom,usb-hs-phy-msm8974
- const: qcom,usb-hs-phy
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 3/4] ARM: dts: qcom: msm8960: Add USB node
2023-06-07 5:00 ` Rudraksha Gupta
(?)
@ 2023-06-07 5:00 ` Rudraksha Gupta
-1 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
Add the required nodes to support USB on the MSM8960 SoC. As it's very
similar to the APQ8064 SoC, the nodes are almost identical
Add a label to sleep_clk for the USB node to reference
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
arch/arm/boot/dts/qcom-msm8960.dtsi | 34 ++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 2a668cd535cc..581b3ab5c4ca 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,lcc-msm8960.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
@@ -71,7 +72,7 @@ pxo_board: pxo_board {
clock-output-names = "pxo_board";
};
- sleep_clk {
+ sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -370,5 +371,36 @@ gsbi1_spi: spi@16080000 {
status = "disabled";
};
};
+
+ usb1: usb@12500000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x12500000 0x200>,
+ <0x12500200 0x200>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+ clock-names = "core", "iface";
+ assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+ assigned-clock-rates = <60000000>;
+ resets = <&gcc USB_HS1_RESET>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ ahb-burst-config = <0>;
+ phys = <&usb_hs1_phy>;
+ phy-names = "usb-phy";
+ #reset-cells = <1>;
+ status = "disabled";
+
+ ulpi {
+ usb_hs1_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8960",
+ "qcom,usb-hs-phy";
+ clocks = <&sleep_clk>, <&cxo_board>;
+ clock-names = "sleep", "ref";
+ resets = <&usb1 0>;
+ reset-names = "por";
+ #phy-cells = <0>;
+ };
+ };
+ };
};
};
--
2.34.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 3/4] ARM: dts: qcom: msm8960: Add USB node
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
Add the required nodes to support USB on the MSM8960 SoC. As it's very
similar to the APQ8064 SoC, the nodes are almost identical
Add a label to sleep_clk for the USB node to reference
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
arch/arm/boot/dts/qcom-msm8960.dtsi | 34 ++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 2a668cd535cc..581b3ab5c4ca 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,lcc-msm8960.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
@@ -71,7 +72,7 @@ pxo_board: pxo_board {
clock-output-names = "pxo_board";
};
- sleep_clk {
+ sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -370,5 +371,36 @@ gsbi1_spi: spi@16080000 {
status = "disabled";
};
};
+
+ usb1: usb@12500000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x12500000 0x200>,
+ <0x12500200 0x200>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+ clock-names = "core", "iface";
+ assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+ assigned-clock-rates = <60000000>;
+ resets = <&gcc USB_HS1_RESET>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ ahb-burst-config = <0>;
+ phys = <&usb_hs1_phy>;
+ phy-names = "usb-phy";
+ #reset-cells = <1>;
+ status = "disabled";
+
+ ulpi {
+ usb_hs1_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8960",
+ "qcom,usb-hs-phy";
+ clocks = <&sleep_clk>, <&cxo_board>;
+ clock-names = "sleep", "ref";
+ resets = <&usb1 0>;
+ reset-names = "por";
+ #phy-cells = <0>;
+ };
+ };
+ };
};
};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 3/4] ARM: dts: qcom: msm8960: Add USB node
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
Add the required nodes to support USB on the MSM8960 SoC. As it's very
similar to the APQ8064 SoC, the nodes are almost identical
Add a label to sleep_clk for the USB node to reference
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
arch/arm/boot/dts/qcom-msm8960.dtsi | 34 ++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 2a668cd535cc..581b3ab5c4ca 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,lcc-msm8960.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
@@ -71,7 +72,7 @@ pxo_board: pxo_board {
clock-output-names = "pxo_board";
};
- sleep_clk {
+ sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -370,5 +371,36 @@ gsbi1_spi: spi@16080000 {
status = "disabled";
};
};
+
+ usb1: usb@12500000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x12500000 0x200>,
+ <0x12500200 0x200>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+ clock-names = "core", "iface";
+ assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+ assigned-clock-rates = <60000000>;
+ resets = <&gcc USB_HS1_RESET>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ ahb-burst-config = <0>;
+ phys = <&usb_hs1_phy>;
+ phy-names = "usb-phy";
+ #reset-cells = <1>;
+ status = "disabled";
+
+ ulpi {
+ usb_hs1_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8960",
+ "qcom,usb-hs-phy";
+ clocks = <&sleep_clk>, <&cxo_board>;
+ clock-names = "sleep", "ref";
+ resets = <&usb1 0>;
+ reset-names = "por";
+ #phy-cells = <0>;
+ };
+ };
+ };
};
};
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
2023-06-07 5:00 ` Rudraksha Gupta
(?)
@ 2023-06-07 5:00 ` Rudraksha Gupta
-1 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
Add a very basic device tree file for the Samsung Galaxy Express SGH-I437.
Currently, the following things work: UART, eMMC, SD Card, and USB.
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-msm8960-samsung-expressatt.dts | 331 ++++++++++++++++++
2 files changed, 332 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59829fc90315..12c90f263142 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1081,6 +1081,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8916-samsung-grandmax.dtb \
qcom-msm8916-samsung-serranove.dtb \
qcom-msm8960-cdp.dtb \
+ qcom-msm8960-samsung-expressatt.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8974-sony-xperia-rhine-amami.dtb \
qcom-msm8974-sony-xperia-rhine-honami.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
new file mode 100644
index 000000000000..13e85c287498
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8960.dtsi"
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+/ {
+ model = "Samsung Galaxy Express SGH-I437";
+ compatible = "samsung,expressatt", "qcom,msm8960";
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &gsbi5_serial;
+ mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+ mmc1 = &sdcc3; /* SDCC3 SD card slot */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+};
+
+&gsbi5_serial {
+ status = "okay";
+};
+
+&sdcc1 {
+ vmmc-supply = <&pm8921_l5>;
+ status = "okay";
+};
+
+&sdcc3 {
+ vmmc-supply = <&pm8921_l6>;
+ vqmmc-supply = <&pm8921_l7>;
+ status = "okay";
+};
+
+&gsbi1 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ pinctrl-0 = <&spi1_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gsbi1_spi {
+ status = "okay";
+};
+
+&msmgpio {
+ spi1_default: spi1-default-state {
+ mosi-pins {
+ pins = "gpio6";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ miso-pins {
+ pins = "gpio7";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio8";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ output-low;
+ };
+
+ clk-pins {
+ pins = "gpio9";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+};
+
+&rpm {
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+ vdd_ncp-supply = <&pm8921_l6>;
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l21_l23_l29-supply = <&pm8921_s8>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s2: s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ pm8921_s4: s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s8: s8 {
+ regulator-always-on;
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8921_l1: l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8921_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l5: l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l7: l7 {
+ regulator-always-on;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l8: l8 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3100000>;
+ bias-pull-down;
+ };
+
+ pm8921_l9: l9 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8921_l10: l10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l11: l11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l12: l12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l16: l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l17: l17 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l18: l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ bias-pull-down;
+ };
+
+ pm8921_l21: l21 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8921_l22: l22 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l24: l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8921_l25: l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs2: lvs2 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs3: lvs3 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs4: lvs4 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs5: lvs5 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs7: lvs7 {
+ bias-pull-down;
+ };
+
+ pm8921_ncp: ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+};
+
+&usb_hs1_phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
Add a very basic device tree file for the Samsung Galaxy Express SGH-I437.
Currently, the following things work: UART, eMMC, SD Card, and USB.
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-msm8960-samsung-expressatt.dts | 331 ++++++++++++++++++
2 files changed, 332 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59829fc90315..12c90f263142 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1081,6 +1081,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8916-samsung-grandmax.dtb \
qcom-msm8916-samsung-serranove.dtb \
qcom-msm8960-cdp.dtb \
+ qcom-msm8960-samsung-expressatt.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8974-sony-xperia-rhine-amami.dtb \
qcom-msm8974-sony-xperia-rhine-honami.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
new file mode 100644
index 000000000000..13e85c287498
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8960.dtsi"
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+/ {
+ model = "Samsung Galaxy Express SGH-I437";
+ compatible = "samsung,expressatt", "qcom,msm8960";
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &gsbi5_serial;
+ mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+ mmc1 = &sdcc3; /* SDCC3 SD card slot */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+};
+
+&gsbi5_serial {
+ status = "okay";
+};
+
+&sdcc1 {
+ vmmc-supply = <&pm8921_l5>;
+ status = "okay";
+};
+
+&sdcc3 {
+ vmmc-supply = <&pm8921_l6>;
+ vqmmc-supply = <&pm8921_l7>;
+ status = "okay";
+};
+
+&gsbi1 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ pinctrl-0 = <&spi1_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gsbi1_spi {
+ status = "okay";
+};
+
+&msmgpio {
+ spi1_default: spi1-default-state {
+ mosi-pins {
+ pins = "gpio6";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ miso-pins {
+ pins = "gpio7";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio8";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ output-low;
+ };
+
+ clk-pins {
+ pins = "gpio9";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+};
+
+&rpm {
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+ vdd_ncp-supply = <&pm8921_l6>;
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l21_l23_l29-supply = <&pm8921_s8>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s2: s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ pm8921_s4: s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s8: s8 {
+ regulator-always-on;
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8921_l1: l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8921_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l5: l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l7: l7 {
+ regulator-always-on;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l8: l8 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3100000>;
+ bias-pull-down;
+ };
+
+ pm8921_l9: l9 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8921_l10: l10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l11: l11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l12: l12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l16: l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l17: l17 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l18: l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ bias-pull-down;
+ };
+
+ pm8921_l21: l21 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8921_l22: l22 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l24: l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8921_l25: l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs2: lvs2 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs3: lvs3 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs4: lvs4 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs5: lvs5 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs7: lvs7 {
+ bias-pull-down;
+ };
+
+ pm8921_ncp: ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+};
+
+&usb_hs1_phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
@ 2023-06-07 5:00 ` Rudraksha Gupta
0 siblings, 0 replies; 24+ messages in thread
From: Rudraksha Gupta @ 2023-06-07 5:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: Rudraksha Gupta, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-arm-kernel
Add a very basic device tree file for the Samsung Galaxy Express SGH-I437.
Currently, the following things work: UART, eMMC, SD Card, and USB.
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-msm8960-samsung-expressatt.dts | 331 ++++++++++++++++++
2 files changed, 332 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59829fc90315..12c90f263142 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1081,6 +1081,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8916-samsung-grandmax.dtb \
qcom-msm8916-samsung-serranove.dtb \
qcom-msm8960-cdp.dtb \
+ qcom-msm8960-samsung-expressatt.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8974-sony-xperia-rhine-amami.dtb \
qcom-msm8974-sony-xperia-rhine-honami.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
new file mode 100644
index 000000000000..13e85c287498
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8960.dtsi"
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+/ {
+ model = "Samsung Galaxy Express SGH-I437";
+ compatible = "samsung,expressatt", "qcom,msm8960";
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &gsbi5_serial;
+ mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+ mmc1 = &sdcc3; /* SDCC3 SD card slot */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+};
+
+&gsbi5_serial {
+ status = "okay";
+};
+
+&sdcc1 {
+ vmmc-supply = <&pm8921_l5>;
+ status = "okay";
+};
+
+&sdcc3 {
+ vmmc-supply = <&pm8921_l6>;
+ vqmmc-supply = <&pm8921_l7>;
+ status = "okay";
+};
+
+&gsbi1 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ pinctrl-0 = <&spi1_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gsbi1_spi {
+ status = "okay";
+};
+
+&msmgpio {
+ spi1_default: spi1-default-state {
+ mosi-pins {
+ pins = "gpio6";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ miso-pins {
+ pins = "gpio7";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio8";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ output-low;
+ };
+
+ clk-pins {
+ pins = "gpio9";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+};
+
+&rpm {
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+ vdd_ncp-supply = <&pm8921_l6>;
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l21_l23_l29-supply = <&pm8921_s8>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s2: s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ pm8921_s4: s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s8: s8 {
+ regulator-always-on;
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8921_l1: l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8921_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l5: l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l7: l7 {
+ regulator-always-on;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l8: l8 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3100000>;
+ bias-pull-down;
+ };
+
+ pm8921_l9: l9 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8921_l10: l10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l11: l11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l12: l12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l16: l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l17: l17 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l18: l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ bias-pull-down;
+ };
+
+ pm8921_l21: l21 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8921_l22: l22 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l24: l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8921_l25: l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs2: lvs2 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs3: lvs3 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs4: lvs4 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs5: lvs5 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs7: lvs7 {
+ bias-pull-down;
+ };
+
+ pm8921_ncp: ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+};
+
+&usb_hs1_phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
2023-06-07 5:00 ` Rudraksha Gupta
(?)
@ 2023-06-07 6:57 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 24+ messages in thread
From: Krzysztof Kozlowski @ 2023-06-07 6:57 UTC (permalink / raw)
To: Rudraksha Gupta, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-arm-kernel
On 07/06/2023 07:00, Rudraksha Gupta wrote:
> Adds qcom,usb-hs-phy-msm8960 compatible
>
> Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
@ 2023-06-07 6:57 ` Krzysztof Kozlowski
0 siblings, 0 replies; 24+ messages in thread
From: Krzysztof Kozlowski @ 2023-06-07 6:57 UTC (permalink / raw)
To: Rudraksha Gupta, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-arm-kernel
On 07/06/2023 07:00, Rudraksha Gupta wrote:
> Adds qcom,usb-hs-phy-msm8960 compatible
>
> Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
@ 2023-06-07 6:57 ` Krzysztof Kozlowski
0 siblings, 0 replies; 24+ messages in thread
From: Krzysztof Kozlowski @ 2023-06-07 6:57 UTC (permalink / raw)
To: Rudraksha Gupta, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Vinod Koul,
Kishon Vijay Abraham I, Arnd Bergmann, Olof Johansson, soc
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-arm-kernel
On 07/06/2023 07:00, Rudraksha Gupta wrote:
> Adds qcom,usb-hs-phy-msm8960 compatible
>
> Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: (subset) [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support
2023-06-07 5:00 ` Rudraksha Gupta
(?)
@ 2023-06-13 23:48 ` Bjorn Andersson
-1 siblings, 0 replies; 24+ messages in thread
From: Bjorn Andersson @ 2023-06-13 23:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson, Andy Gross,
soc, Rudraksha Gupta, Rob Herring, Kishon Vijay Abraham I,
Conor Dooley, Vinod Koul, Konrad Dybcio
Cc: devicetree, linux-kernel, linux-arm-msm, linux-arm-kernel, linux-phy
On Wed, 7 Jun 2023 01:00:19 -0400, Rudraksha Gupta wrote:
> This patch series adds support for the Samsung Galaxy Express SGH-I437.
> Currently the following things work on this phone: UART, eMMC, SD Card, and
> USB.
>
> version 5:
> - use enum instead of anyOf in qcom,usb-hs-phy.yaml
>
> [...]
Applied, thanks!
[3/4] ARM: dts: qcom: msm8960: Add USB node
commit: 80ce22e5cbe705ff2e113890828d44aa0b3ad96f
[4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
commit: 2b01dda16124696c4b64edcd31e8c2d37c559998
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: (subset) [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support
@ 2023-06-13 23:48 ` Bjorn Andersson
0 siblings, 0 replies; 24+ messages in thread
From: Bjorn Andersson @ 2023-06-13 23:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson, Andy Gross,
soc, Rudraksha Gupta, Rob Herring, Kishon Vijay Abraham I,
Conor Dooley, Vinod Koul, Konrad Dybcio
Cc: devicetree, linux-kernel, linux-arm-msm, linux-arm-kernel, linux-phy
On Wed, 7 Jun 2023 01:00:19 -0400, Rudraksha Gupta wrote:
> This patch series adds support for the Samsung Galaxy Express SGH-I437.
> Currently the following things work on this phone: UART, eMMC, SD Card, and
> USB.
>
> version 5:
> - use enum instead of anyOf in qcom,usb-hs-phy.yaml
>
> [...]
Applied, thanks!
[3/4] ARM: dts: qcom: msm8960: Add USB node
commit: 80ce22e5cbe705ff2e113890828d44aa0b3ad96f
[4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
commit: 2b01dda16124696c4b64edcd31e8c2d37c559998
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: (subset) [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support
@ 2023-06-13 23:48 ` Bjorn Andersson
0 siblings, 0 replies; 24+ messages in thread
From: Bjorn Andersson @ 2023-06-13 23:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Arnd Bergmann, Olof Johansson, Andy Gross,
soc, Rudraksha Gupta, Rob Herring, Kishon Vijay Abraham I,
Conor Dooley, Vinod Koul, Konrad Dybcio
Cc: devicetree, linux-kernel, linux-arm-msm, linux-arm-kernel, linux-phy
On Wed, 7 Jun 2023 01:00:19 -0400, Rudraksha Gupta wrote:
> This patch series adds support for the Samsung Galaxy Express SGH-I437.
> Currently the following things work on this phone: UART, eMMC, SD Card, and
> USB.
>
> version 5:
> - use enum instead of anyOf in qcom,usb-hs-phy.yaml
>
> [...]
Applied, thanks!
[3/4] ARM: dts: qcom: msm8960: Add USB node
commit: 80ce22e5cbe705ff2e113890828d44aa0b3ad96f
[4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
commit: 2b01dda16124696c4b64edcd31e8c2d37c559998
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
2023-06-07 5:00 ` Rudraksha Gupta
(?)
@ 2023-06-21 12:38 ` Vinod Koul
-1 siblings, 0 replies; 24+ messages in thread
From: Vinod Koul @ 2023-06-21 12:38 UTC (permalink / raw)
To: Rudraksha Gupta
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Kishon Vijay Abraham I,
Arnd Bergmann, Olof Johansson, soc, linux-arm-msm, devicetree,
linux-kernel, linux-phy, linux-arm-kernel
On 07-06-23, 01:00, Rudraksha Gupta wrote:
> Adds qcom,usb-hs-phy-msm8960 compatible
Applied, thanks
--
~Vinod
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
@ 2023-06-21 12:38 ` Vinod Koul
0 siblings, 0 replies; 24+ messages in thread
From: Vinod Koul @ 2023-06-21 12:38 UTC (permalink / raw)
To: Rudraksha Gupta
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Kishon Vijay Abraham I,
Arnd Bergmann, Olof Johansson, soc, linux-arm-msm, devicetree,
linux-kernel, linux-phy, linux-arm-kernel
On 07-06-23, 01:00, Rudraksha Gupta wrote:
> Adds qcom,usb-hs-phy-msm8960 compatible
Applied, thanks
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
@ 2023-06-21 12:38 ` Vinod Koul
0 siblings, 0 replies; 24+ messages in thread
From: Vinod Koul @ 2023-06-21 12:38 UTC (permalink / raw)
To: Rudraksha Gupta
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Kishon Vijay Abraham I,
Arnd Bergmann, Olof Johansson, soc, linux-arm-msm, devicetree,
linux-kernel, linux-phy, linux-arm-kernel
On 07-06-23, 01:00, Rudraksha Gupta wrote:
> Adds qcom,usb-hs-phy-msm8960 compatible
Applied, thanks
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2023-06-21 12:38 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-07 5:00 [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-07 5:00 ` [PATCH v5 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-07 5:00 ` [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-07 6:57 ` Krzysztof Kozlowski
2023-06-07 6:57 ` Krzysztof Kozlowski
2023-06-07 6:57 ` Krzysztof Kozlowski
2023-06-21 12:38 ` Vinod Koul
2023-06-21 12:38 ` Vinod Koul
2023-06-21 12:38 ` Vinod Koul
2023-06-07 5:00 ` [PATCH v5 3/4] ARM: dts: qcom: msm8960: Add USB node Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-07 5:00 ` [PATCH v5 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-07 5:00 ` Rudraksha Gupta
2023-06-13 23:48 ` (subset) [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support Bjorn Andersson
2023-06-13 23:48 ` Bjorn Andersson
2023-06-13 23:48 ` Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.