* [PATCH V3 0/2] Add support for GPIO based leds and buttons on IPQ5332/9574 devices
@ 2023-06-15 14:28 Sridharan S N
2023-06-15 14:28 ` [PATCH 1/2] arm64: dts: qcom: ipq5332: enable GPIO based LEDs and Buttons Sridharan S N
2023-06-15 14:28 ` [PATCH 2/2] arm64: dts: qcom: ipq9574: enable GPIO based LEDs Sridharan S N
0 siblings, 2 replies; 4+ messages in thread
From: Sridharan S N @ 2023-06-15 14:28 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel
Cc: Sridharan S N
Add support for wlan-2g led and wps button available on IPQ5332 and
IPQ9574
Changes since V1:
- Updated patch series title. Mentioned platform in
series title
Sridharan S N (2):
arm64: dts: qcom: ipq5332: enable GPIO based LEDs and Buttons
arm64: dts: qcom: ipq9574: enable GPIO based LEDs
.../boot/dts/qcom/ipq5332-rdp-common.dtsi | 39 +++++++++++++++++++
.../boot/dts/qcom/ipq9574-rdp-common.dtsi | 20 ++++++++++
2 files changed, 59 insertions(+)
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 1/2] arm64: dts: qcom: ipq5332: enable GPIO based LEDs and Buttons
2023-06-15 14:28 [PATCH V3 0/2] Add support for GPIO based leds and buttons on IPQ5332/9574 devices Sridharan S N
@ 2023-06-15 14:28 ` Sridharan S N
2023-06-15 14:28 ` [PATCH 2/2] arm64: dts: qcom: ipq9574: enable GPIO based LEDs Sridharan S N
1 sibling, 0 replies; 4+ messages in thread
From: Sridharan S N @ 2023-06-15 14:28 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel
Cc: Sridharan S N
Add support for wlan-2g LED on GPIO 36 and wps buttons on GPIO 35.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
---
Changes in V3:
- added leds and gpio-keys nodes in rdp-common.dtsi
Changes in V2:
- Used the hypen in node name instead of underscore
- Dropped the status property
.../boot/dts/qcom/ipq5332-rdp-common.dtsi | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
index 97dc0e5c15f0..a8671a4ac2e4 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
@@ -19,6 +19,31 @@
chosen {
stdout-path = "serial0";
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_i2c1 {
@@ -52,6 +77,20 @@
/* PINCTRL */
&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio36";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
i2c_1_pins: i2c-1-state {
pins = "gpio29", "gpio30";
function = "blsp1_i2c0";
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: ipq9574: enable GPIO based LEDs
2023-06-15 14:28 [PATCH V3 0/2] Add support for GPIO based leds and buttons on IPQ5332/9574 devices Sridharan S N
2023-06-15 14:28 ` [PATCH 1/2] arm64: dts: qcom: ipq5332: enable GPIO based LEDs and Buttons Sridharan S N
@ 2023-06-15 14:28 ` Sridharan S N
1 sibling, 0 replies; 4+ messages in thread
From: Sridharan S N @ 2023-06-15 14:28 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel
Cc: Sridharan S N
Add support for wlan-2g LED on GPIO 64.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
---
Changes in V3:
- added leds and gpio-keys nodes in rdp-common.dtsi
Changes in V2:
- No changes
.../boot/dts/qcom/ipq9574-rdp-common.dtsi | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index fd5326dc1773..25424cecd834 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -34,6 +34,18 @@
debounce-interval = <60>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_spi0 {
@@ -137,6 +149,14 @@
drive-strength = <8>;
bias-pull-up;
};
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
};
&xo_board_clk {
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: ipq9574: enable GPIO based LEDs
2023-05-31 6:56 [PATCH 0/2] Add support for GPIO based leds and buttons Sridharan S N
@ 2023-05-31 6:56 ` Sridharan S N
0 siblings, 0 replies; 4+ messages in thread
From: Sridharan S N @ 2023-05-31 6:56 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel
Cc: Sridharan S N
Add support for wlan-2g LED on GPIO 64.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
---
arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts | 20 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 20 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts | 20 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 20 ++++++++++++++++++++
4 files changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
index 2b093e02637b..77b450cbdea6 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
@@ -8,6 +8,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "ipq9574.dtsi"
/ {
@@ -21,6 +22,18 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_spi0 {
@@ -79,6 +92,13 @@
};
&tlmm {
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
sdc_default_state: sdc-default-state {
clk-pins {
pins = "gpio5";
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 2b3ed8d351f7..b47971b54ccc 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -8,6 +8,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "ipq9574.dtsi"
/ {
@@ -21,6 +22,18 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_uart2 {
@@ -65,6 +78,13 @@
};
&tlmm {
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
sdc_default_state: sdc-default-state {
clk-pins {
pins = "gpio5";
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
index c8fa54e1a62c..50be898cef92 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
@@ -8,6 +8,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "ipq9574.dtsi"
/ {
@@ -21,6 +22,18 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_spi0 {
@@ -67,6 +80,13 @@
};
&tlmm {
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
spi_0_pins: spi-0-state {
pins = "gpio11", "gpio12", "gpio13", "gpio14";
function = "blsp0_spi";
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
index f01de6628c3b..f45b5d5353f8 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
@@ -8,6 +8,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "ipq9574.dtsi"
/ {
@@ -21,6 +22,18 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};
&blsp1_spi0 {
@@ -67,6 +80,13 @@
};
&tlmm {
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
spi_0_pins: spi-0-state {
pins = "gpio11", "gpio12", "gpio13", "gpio14";
function = "blsp0_spi";
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-06-15 14:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-15 14:28 [PATCH V3 0/2] Add support for GPIO based leds and buttons on IPQ5332/9574 devices Sridharan S N
2023-06-15 14:28 ` [PATCH 1/2] arm64: dts: qcom: ipq5332: enable GPIO based LEDs and Buttons Sridharan S N
2023-06-15 14:28 ` [PATCH 2/2] arm64: dts: qcom: ipq9574: enable GPIO based LEDs Sridharan S N
-- strict thread matches above, loose matches on Subject: below --
2023-05-31 6:56 [PATCH 0/2] Add support for GPIO based leds and buttons Sridharan S N
2023-05-31 6:56 ` [PATCH 2/2] arm64: dts: qcom: ipq9574: enable GPIO based LEDs Sridharan S N
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.