[PATCH AUTOSEL 6.4 01/40] serial: stm32: Ignore return value of uart_remove_one_port() in .remove()

[PATCH AUTOSEL 6.4 01/40] serial: stm32: Ignore return value of uart_remove_one_port() in .remove()

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 6bd6cd29c92401a101993290051fa55078238a52 ]

Returning early from stm32_usart_serial_remove() results in a resource
leak as several cleanup functions are not called. The driver core ignores
the return value and there is no possibility to clean up later.

uart_remove_one_port() only returns non-zero if there is some
inconsistency (i.e. stm32_usart_driver.state[port->line].uart_port == NULL).
This should never happen, and even if it does it's a bad idea to exit
early in the remove callback without cleaning up.

This prepares changing the prototype of struct platform_driver::remove to
return void. See commit 5c5a7680e67b ("platform: Provide a remove callback
that returns no value") for further details about this quest.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230512173810.131447-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/stm32-usart.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1e38fc9b10c11..e9e11a2596211 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1755,13 +1755,10 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct stm32_port *stm32_port = to_stm32_port(port);
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
-	int err;
 	u32 cr3;
 
 	pm_runtime_get_sync(&pdev->dev);
-	err = uart_remove_one_port(&stm32_usart_driver, port);
-	if (err)
-		return(err);
+	uart_remove_one_port(&stm32_usart_driver, port);
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
-- 
2.39.2

[PATCH AUTOSEL 6.4 02/40] led: qcom-lpg: Fix resource leaks in for_each_available_child_of_node() loops

[Sasha Levin]

From: Lu Hongfei <luhongfei@vivo.com>

[ Upstream commit 8f38f8fa7261819eb7d4fb369dc3bfab72259033 ]

Ensure child node references are decremented properly in the error path.

Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230525111705.3055-1-luhongfei@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/rgb/leds-qcom-lpg.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 1c849814a4917..212df2e3d3502 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -1173,8 +1173,10 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
 		i = 0;
 		for_each_available_child_of_node(np, child) {
 			ret = lpg_parse_channel(lpg, child, &led->channels[i]);
-			if (ret < 0)
+			if (ret < 0) {
+				of_node_put(child);
 				return ret;
+			}
 
 			info[i].color_index = led->channels[i]->color;
 			info[i].intensity = 0;
@@ -1352,8 +1354,10 @@ static int lpg_probe(struct platform_device *pdev)
 
 	for_each_available_child_of_node(pdev->dev.of_node, np) {
 		ret = lpg_add_led(lpg, np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			return ret;
+		}
 	}
 
 	for (i = 0; i < lpg->num_channels; i++)
-- 
2.39.2

[PATCH AUTOSEL 6.4 03/40] media: v4l2-mem2mem: add lock to protect parameter num_rdy

[Sasha Levin]

From: Yunfei Dong <yunfei.dong@mediatek.com>

[ Upstream commit 56b5c3e67b0f9af3f45cf393be048ee8d8a92694 ]

Getting below error when using KCSAN to check the driver. Adding lock to
protect parameter num_rdy when getting the value with function:
v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready.

kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue
kworker/u16:3: [name:report&]

kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7:
kworker/u16:3:  v4l2_m2m_buf_queue+0xd8/0x10c

Signed-off-by: Pina Chen <pina.chen@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/media/v4l2-mem2mem.h | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h
index bb9de6a899e07..d6c8eb2b52019 100644
--- a/include/media/v4l2-mem2mem.h
+++ b/include/media/v4l2-mem2mem.h
@@ -593,7 +593,14 @@ void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx,
 static inline
 unsigned int v4l2_m2m_num_src_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx)
 {
-	return m2m_ctx->out_q_ctx.num_rdy;
+	unsigned int num_buf_rdy;
+	unsigned long flags;
+
+	spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags);
+	num_buf_rdy = m2m_ctx->out_q_ctx.num_rdy;
+	spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags);
+
+	return num_buf_rdy;
 }
 
 /**
@@ -605,7 +612,14 @@ unsigned int v4l2_m2m_num_src_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx)
 static inline
 unsigned int v4l2_m2m_num_dst_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx)
 {
-	return m2m_ctx->cap_q_ctx.num_rdy;
+	unsigned int num_buf_rdy;
+	unsigned long flags;
+
+	spin_lock_irqsave(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags);
+	num_buf_rdy = m2m_ctx->cap_q_ctx.num_rdy;
+	spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags);
+
+	return num_buf_rdy;
 }
 
 /**
-- 
2.39.2

[PATCH AUTOSEL 6.4 04/40] media: camss: set VFE bpl_alignment to 16 for sdm845 and sm8250

[Sasha Levin]

From: Andrey Konovalov <andrey.konovalov@linaro.org>

[ Upstream commit d5b7eb477c286f6ceccbb38704136eea0e6b09ca ]

From the experiments with camera sensors using SGRBG10_1X10/3280x2464 and
SRGGB10_1X10/3280x2464 formats, it becomes clear that on sdm845 and sm8250
VFE outputs the lines padded to a length multiple of 16 bytes. As in the
current driver the value of the bpl_alignment is set to 8 bytes, the frames
captured in formats with the bytes-per-line value being not a multiple of
16 get corrupted.

Set the bpl_alignment of the camss video output device to 16 for sdm845 and
sm8250 to fix that.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/camss/camss-vfe.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index e0832f3f4f25c..06c95568e5af4 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -1541,7 +1541,11 @@ int msm_vfe_register_entities(struct vfe_device *vfe,
 		}
 
 		video_out->ops = &vfe->video_ops;
-		video_out->bpl_alignment = 8;
+		if (vfe->camss->version == CAMSS_845 ||
+		    vfe->camss->version == CAMSS_8250)
+			video_out->bpl_alignment = 16;
+		else
+			video_out->bpl_alignment = 8;
 		video_out->line_based = 0;
 		if (i == VFE_LINE_PIX) {
 			video_out->bpl_alignment = 16;
-- 
2.39.2

[PATCH AUTOSEL 6.4 05/40] usb: gadget: u_serial: Avoid spinlock recursion in __gs_console_push

[Sasha Levin]

From: Prashanth K <quic_prashk@quicinc.com>

[ Upstream commit e5990469943c711cb00bfde6338d2add6c6d0bfe ]

When serial console over USB is enabled, gs_console_connect
queues gs_console_work, where it acquires the spinlock and
queues the usb request, and this request goes to gadget layer.
Now consider a situation where gadget layer prints something
to dmesg, this will eventually call gs_console_write() which
requires cons->lock. And this causes spinlock recursion. Avoid
this by excluding usb_ep_queue from the spinlock.

 spin_lock_irqsave //needs cons->lock
 gs_console_write
	.
	.
 _printk
 __warn_printk
 dev_warn/pr_err
	.
	.
 [USB Gadget Layer]
	.
	.
 usb_ep_queue
 gs_console_work
 __gs_console_push // acquires cons->lock
 process_one_work

Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/1683638872-6885-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/u_serial.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index a0ca47fbff0fc..1bc96ff954ffe 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -916,8 +916,11 @@ static void __gs_console_push(struct gs_console *cons)
 	}
 
 	req->length = size;
+
+	spin_unlock_irq(&cons->lock);
 	if (usb_ep_queue(ep, req, GFP_ATOMIC))
 		req->length = 0;
+	spin_lock_irq(&cons->lock);
 }
 
 static void gs_console_work(struct work_struct *work)
-- 
2.39.2

[PATCH AUTOSEL 6.4 06/40] usb: gadget: uvc: queue empty isoc requests if no video buffer is available

[Sasha Levin]

From: Avichal Rakesh <arakesh@google.com>

[ Upstream commit c3ff12a92bd7072170978b8b41c2fa41b038139a ]

ISOC transfers expect a certain cadence of requests being queued. Not
keeping up with the expected rate of requests results in missed ISOC
transfers (EXDEV). The application layer may or may not produce video
frames to match this expectation, so uvc gadget driver must handle cases
where the application is not queuing up buffers fast enough to fulfill
ISOC requirements.

Currently, uvc gadget driver waits for new video buffer to become available
before queuing up usb requests. With this patch the gadget driver queues up
0 length usb requests whenever there are no video buffers available. The
USB controller's complete callback is used as the limiter for how quickly
the 0 length packets will be queued. Video buffers are still queued as
soon as they become available.

Link: https://lore.kernel.org/CAMHf4WKbi6KBPQztj9FA4kPvESc1fVKrC8G73-cs6tTeQby9=w@mail.gmail.com/
Signed-off-by: Avichal Rakesh <arakesh@google.com>
Link: https://lore.kernel.org/r/20230508231103.1621375-1-arakesh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/uvc_video.c | 32 ++++++++++++++++++-------
 1 file changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index dd1c6b2ca7c6f..e81865978299c 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -386,6 +386,9 @@ static void uvcg_video_pump(struct work_struct *work)
 	struct uvc_buffer *buf;
 	unsigned long flags;
 	int ret;
+	bool buf_int;
+	/* video->max_payload_size is only set when using bulk transfer */
+	bool is_bulk = video->max_payload_size;
 
 	while (video->ep->enabled) {
 		/*
@@ -408,20 +411,35 @@ static void uvcg_video_pump(struct work_struct *work)
 		 */
 		spin_lock_irqsave(&queue->irqlock, flags);
 		buf = uvcg_queue_head(queue);
-		if (buf == NULL) {
+
+		if (buf != NULL) {
+			video->encode(req, video, buf);
+			/* Always interrupt for the last request of a video buffer */
+			buf_int = buf->state == UVC_BUF_STATE_DONE;
+		} else if (!(queue->flags & UVC_QUEUE_DISCONNECTED) && !is_bulk) {
+			/*
+			 * No video buffer available; the queue is still connected and
+			 * we're traferring over ISOC. Queue a 0 length request to
+			 * prevent missed ISOC transfers.
+			 */
+			req->length = 0;
+			buf_int = false;
+		} else {
+			/*
+			 * Either queue has been disconnected or no video buffer
+			 * available to bulk transfer. Either way, stop processing
+			 * further.
+			 */
 			spin_unlock_irqrestore(&queue->irqlock, flags);
 			break;
 		}
 
-		video->encode(req, video, buf);
-
 		/*
 		 * With usb3 we have more requests. This will decrease the
 		 * interrupt load to a quarter but also catches the corner
 		 * cases, which needs to be handled.
 		 */
-		if (list_empty(&video->req_free) ||
-		    buf->state == UVC_BUF_STATE_DONE ||
+		if (list_empty(&video->req_free) || buf_int ||
 		    !(video->req_int_count %
 		       DIV_ROUND_UP(video->uvc_num_requests, 4))) {
 			video->req_int_count = 0;
@@ -441,8 +459,7 @@ static void uvcg_video_pump(struct work_struct *work)
 
 		/* Endpoint now owns the request */
 		req = NULL;
-		if (buf->state != UVC_BUF_STATE_DONE)
-			video->req_int_count++;
+		video->req_int_count++;
 	}
 
 	if (!req)
@@ -527,4 +544,3 @@ int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc)
 			V4L2_BUF_TYPE_VIDEO_OUTPUT, &video->mutex);
 	return 0;
 }
-
-- 
2.39.2

[PATCH AUTOSEL 6.4 07/40] media: platform: mediatek: vpu: fix NULL ptr dereference

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 3df55cd773e8603b623425cc97b05e542854ad27 ]

If pdev is NULL, then it is still dereferenced.

This fixes this smatch warning:

drivers/media/platform/mediatek/vpu/mtk_vpu.c:570 vpu_load_firmware() warn: address of NULL pointer 'pdev'

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mediatek/vpu/mtk_vpu.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mediatek/vpu/mtk_vpu.c b/drivers/media/platform/mediatek/vpu/mtk_vpu.c
index 5e2bc286f168e..1a95958a1f908 100644
--- a/drivers/media/platform/mediatek/vpu/mtk_vpu.c
+++ b/drivers/media/platform/mediatek/vpu/mtk_vpu.c
@@ -562,15 +562,17 @@ static int load_requested_vpu(struct mtk_vpu *vpu,
 int vpu_load_firmware(struct platform_device *pdev)
 {
 	struct mtk_vpu *vpu;
-	struct device *dev = &pdev->dev;
+	struct device *dev;
 	struct vpu_run *run;
 	int ret;
 
 	if (!pdev) {
-		dev_err(dev, "VPU platform device is invalid\n");
+		pr_err("VPU platform device is invalid\n");
 		return -EINVAL;
 	}
 
+	dev = &pdev->dev;
+
 	vpu = platform_get_drvdata(pdev);
 	run = &vpu->run;
 
-- 
2.39.2

[PATCH AUTOSEL 6.4 08/40] thunderbolt: Read retimer NVM authentication status prior tb_retimer_set_inbound_sbtx()

[Sasha Levin]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 1402ba08abae5cfa583ff1a40b99c098a0532d41 ]

According to the USB4 retimer guide the correct order is immediately
after sending ENUMERATE_RETIMERS so update the code to follow this.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thunderbolt/retimer.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c
index 9cc28197dbc45..edbd92435b41a 100644
--- a/drivers/thunderbolt/retimer.c
+++ b/drivers/thunderbolt/retimer.c
@@ -187,6 +187,21 @@ static ssize_t nvm_authenticate_show(struct device *dev,
 	return ret;
 }
 
+static void tb_retimer_nvm_authenticate_status(struct tb_port *port, u32 *status)
+{
+	int i;
+
+	tb_port_dbg(port, "reading NVM authentication status of retimers\n");
+
+	/*
+	 * Before doing anything else, read the authentication status.
+	 * If the retimer has it set, store it for the new retimer
+	 * device instance.
+	 */
+	for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++)
+		usb4_port_retimer_nvm_authenticate_status(port, i, &status[i]);
+}
+
 static void tb_retimer_set_inbound_sbtx(struct tb_port *port)
 {
 	int i;
@@ -455,18 +470,16 @@ int tb_retimer_scan(struct tb_port *port, bool add)
 		return ret;
 
 	/*
-	 * Enable sideband channel for each retimer. We can do this
-	 * regardless whether there is device connected or not.
+	 * Immediately after sending enumerate retimers read the
+	 * authentication status of each retimer.
 	 */
-	tb_retimer_set_inbound_sbtx(port);
+	tb_retimer_nvm_authenticate_status(port, status);
 
 	/*
-	 * Before doing anything else, read the authentication status.
-	 * If the retimer has it set, store it for the new retimer
-	 * device instance.
+	 * Enable sideband channel for each retimer. We can do this
+	 * regardless whether there is device connected or not.
 	 */
-	for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++)
-		usb4_port_retimer_nvm_authenticate_status(port, i, &status[i]);
+	tb_retimer_set_inbound_sbtx(port);
 
 	for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++) {
 		/*
-- 
2.39.2

[PATCH AUTOSEL 6.4 09/40] xhci: Don't require a valid get_quirks() function pointer during xhci setup

[Sasha Levin]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 9b907c91aa94522ae14bf155ce7b9ccb10a0903c ]

Not all platforms drivers need to set up custom quirks during the xhci
generic setup. Allow them to pass NULL as the function pointer when
calling xhci_gen_setup()

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Message-ID: <20230602144009.1225632-4-mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 78790dc13c5f1..a1e5f3bd883cc 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5180,7 +5180,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 
 	xhci->quirks |= quirks;
 
-	get_quirks(dev, xhci);
+	if (get_quirks)
+		get_quirks(dev, xhci);
 
 	/* In xhci controllers which follow xhci 1.0 spec gives a spurious
 	 * success event after a short transfer. This quirk will ignore such
-- 
2.39.2

[PATCH AUTOSEL 6.4 10/40] xhci: get rid of XHCI_PLAT quirk that used to prevent MSI setup

[Sasha Levin]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 0a4776205b16d038ec6fedef2094951fcb6f441b ]

The XHCI_PLAT quirk was only needed to ensure non-PCI xHC host avoided
setting up MSI interrupts in generic xhci codepaths.

The MSI setup code is now moved to PCI specific xhci-pci.c file so
the quirk is no longer needed.

Remove setting the XHCI_PLAT quirk for HiSilocon SoC xHC, NVIDIA Tegra xHC,
MediaTek xHC, the generic xhci-plat driver, and the checks for XHCI_PLAT
in xhci-pci.c MSI setup code.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Message-ID: <20230602144009.1225632-5-mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-histb.c | 12 +-----------
 drivers/usb/host/xhci-mtk.c   |  6 ------
 drivers/usb/host/xhci-pci.c   |  7 -------
 drivers/usb/host/xhci-plat.c  |  7 +------
 drivers/usb/host/xhci-tegra.c |  1 -
 drivers/usb/host/xhci.h       |  2 +-
 6 files changed, 3 insertions(+), 32 deletions(-)

diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c
index 08369857686e7..42749ba2e2f85 100644
--- a/drivers/usb/host/xhci-histb.c
+++ b/drivers/usb/host/xhci-histb.c
@@ -164,16 +164,6 @@ static void xhci_histb_host_disable(struct xhci_hcd_histb *histb)
 	clk_disable_unprepare(histb->bus_clk);
 }
 
-static void xhci_histb_quirks(struct device *dev, struct xhci_hcd *xhci)
-{
-	/*
-	 * As of now platform drivers don't provide MSI support so we ensure
-	 * here that the generic code does not try to make a pci_dev from our
-	 * dev struct in order to setup MSI
-	 */
-	xhci->quirks |= XHCI_PLAT;
-}
-
 /* called during probe() after chip reset completes */
 static int xhci_histb_setup(struct usb_hcd *hcd)
 {
@@ -186,7 +176,7 @@ static int xhci_histb_setup(struct usb_hcd *hcd)
 			return ret;
 	}
 
-	return xhci_gen_setup(hcd, xhci_histb_quirks);
+	return xhci_gen_setup(hcd, NULL);
 }
 
 static const struct xhci_driver_overrides xhci_histb_overrides __initconst = {
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 90cf40d6d0c31..a6d3c5238bdde 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -418,12 +418,6 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
 	struct usb_hcd *hcd = xhci_to_hcd(xhci);
 	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
 
-	/*
-	 * As of now platform drivers don't provide MSI support so we ensure
-	 * here that the generic code does not try to make a pci_dev from our
-	 * dev struct in order to setup MSI
-	 */
-	xhci->quirks |= XHCI_PLAT;
 	xhci->quirks |= XHCI_MTK_HOST;
 	/*
 	 * MTK host controller gives a spurious successful event after a
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 79b3691f373f3..3a9f907394a25 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -108,9 +108,6 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 	struct usb_hcd *hcd = xhci_to_hcd(xhci);
 	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 
-	if (xhci->quirks & XHCI_PLAT)
-		return;
-
 	/* return if using legacy interrupt */
 	if (hcd->irq > 0)
 		return;
@@ -208,10 +205,6 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 	struct pci_dev  *pdev;
 	int ret;
 
-	/* The xhci platform device has set up IRQs through usb_add_hcd. */
-	if (xhci->quirks & XHCI_PLAT)
-		return 0;
-
 	pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	/*
 	 * Some Fresco Logic host controllers advertise MSI, but fail to
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index b0c8e8efc43b6..be2b5b786352e 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -78,12 +78,7 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
 	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
 
-	/*
-	 * As of now platform drivers don't provide MSI support so we ensure
-	 * here that the generic code does not try to make a pci_dev from our
-	 * dev struct in order to setup MSI
-	 */
-	xhci->quirks |= XHCI_PLAT | priv->quirks;
+	xhci->quirks |= priv->quirks;
 }
 
 /* called during probe() after chip reset completes */
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index c75d932441436..ebfbd547b2ec6 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -2662,7 +2662,6 @@ static void tegra_xhci_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
 	struct tegra_xusb *tegra = dev_get_drvdata(dev);
 
-	xhci->quirks |= XHCI_PLAT;
 	if (tegra && tegra->soc->lpm_support)
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 }
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6b690ec91ff3a..42444d9b47c9d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1874,7 +1874,7 @@ struct xhci_hcd {
 #define XHCI_SPURIOUS_REBOOT	BIT_ULL(13)
 #define XHCI_COMP_MODE_QUIRK	BIT_ULL(14)
 #define XHCI_AVOID_BEI		BIT_ULL(15)
-#define XHCI_PLAT		BIT_ULL(16)
+#define XHCI_PLAT		BIT_ULL(16) /* Deprecated */
 #define XHCI_SLOW_SUSPEND	BIT_ULL(17)
 #define XHCI_SPURIOUS_WAKEUP	BIT_ULL(18)
 /* For controllers with a broken beyond repair streams implementation */
-- 
2.39.2

[PATCH AUTOSEL 6.4 11/40] usb: chipidea: imx: don't request QoS for imx8ulp

[Sasha Levin]

From: Xu Yang <xu.yang_2@nxp.com>

[ Upstream commit 9a070e8e208995a9d638b538ed7abf28bd6ea6f0 ]

Use dedicated imx8ulp usb compatible to remove QoS request
since imx8ulp has no such limitation of imx7ulp: DMA will
not work if system enters idle.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230530104007.1294702-2-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 2855ac3030014..f7577f2bd2c5d 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -70,6 +70,10 @@ static const struct ci_hdrc_imx_platform_flag imx7ulp_usb_data = {
 		CI_HDRC_PMQOS,
 };
 
+static const struct ci_hdrc_imx_platform_flag imx8ulp_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+};
+
 static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx23-usb", .data = &imx23_usb_data},
 	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
@@ -80,6 +84,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx6ul-usb", .data = &imx6ul_usb_data},
 	{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
 	{ .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data},
+	{ .compatible = "fsl,imx8ulp-usb", .data = &imx8ulp_usb_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
-- 
2.39.2

[PATCH AUTOSEL 6.4 12/40] usb: cdns2: Device side header file for CDNS2 driver

[Sasha Levin]

From: Pawel Laszczak <pawell@cadence.com>

[ Upstream commit 0ca2026eea104adc1d0d356bca35915a1ab6e3e9 ]

Patch defines macros, registers and structures used by
Device side driver.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Message-ID: <20230602102644.77470-2-pawell@cadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/cdns2/cdns2-gadget.h | 707 ++++++++++++++++++++
 1 file changed, 707 insertions(+)
 create mode 100644 drivers/usb/gadget/udc/cdns2/cdns2-gadget.h

diff --git a/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h b/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h
new file mode 100644
index 0000000000000..71e2f62d653a5
--- /dev/null
+++ b/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h
@@ -0,0 +1,707 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * USBHS-DEV device controller driver header file
+ *
+ * Copyright (C) 2023 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#ifndef __LINUX_CDNS2_GADGET
+#define __LINUX_CDNS2_GADGET
+
+#include <linux/usb/gadget.h>
+#include <linux/dma-direction.h>
+
+/*
+ * USBHS register interface.
+ * This corresponds to the USBHS Device Controller Interface.
+ */
+
+/**
+ * struct cdns2_ep0_regs - endpoint 0 related registers.
+ * @rxbc: receive (OUT) 0 endpoint byte count register.
+ * @txbc: transmit (IN) 0 endpoint byte count register.
+ * @cs: 0 endpoint control and status register.
+ * @reserved1: reserved.
+ * @fifo: 0 endpoint fifo register.
+ * @reserved2: reserved.
+ * @setupdat: SETUP data register.
+ * @reserved4: reserved.
+ * @maxpack: 0 endpoint max packet size.
+ */
+struct cdns2_ep0_regs {
+	__u8 rxbc;
+	__u8 txbc;
+	__u8 cs;
+	__u8 reserved1[4];
+	__u8 fifo;
+	__le32 reserved2[94];
+	__u8 setupdat[8];
+	__u8 reserved4[88];
+	__u8 maxpack;
+} __packed __aligned(4);
+
+/* EP0CS - bitmasks. */
+/* Endpoint 0 stall bit for status stage. */
+#define EP0CS_STALL	BIT(0)
+/* HSNAK bit. */
+#define EP0CS_HSNAK	BIT(1)
+/* IN 0 endpoint busy bit. */
+#define EP0CS_TXBSY_MSK	BIT(2)
+/* OUT 0 endpoint busy bit. */
+#define EP0CS_RXBSY_MSK	BIT(3)
+/* Send STALL in the data stage phase. */
+#define EP0CS_DSTALL	BIT(4)
+/* SETUP buffer content was changed. */
+#define EP0CS_CHGSET	BIT(7)
+
+/* EP0FIFO - bitmasks. */
+/* Direction. */
+#define EP0_FIFO_IO_TX	BIT(4)
+/* FIFO auto bit. */
+#define EP0_FIFO_AUTO	BIT(5)
+/* FIFO commit bit. */
+#define EP0_FIFO_COMMIT	BIT(6)
+/* FIFO access bit. */
+#define EP0_FIFO_ACCES	BIT(7)
+
+/**
+ * struct cdns2_epx_base - base endpoint registers.
+ * @rxbc: OUT endpoint byte count register.
+ * @rxcon: OUT endpoint control register.
+ * @rxcs: OUT endpoint control and status register.
+ * @txbc: IN endpoint byte count register.
+ * @txcon: IN endpoint control register.
+ * @txcs: IN endpoint control and status register.
+ */
+struct cdns2_epx_base {
+	__le16 rxbc;
+	__u8 rxcon;
+	__u8 rxcs;
+	__le16 txbc;
+	__u8 txcon;
+	__u8 txcs;
+} __packed __aligned(4);
+
+/* rxcon/txcon - endpoint control register bitmasks. */
+/* Endpoint buffering: 0 - single buffering ... 3 - quad buffering. */
+#define EPX_CON_BUF		GENMASK(1, 0)
+/* Endpoint type. */
+#define EPX_CON_TYPE		GENMASK(3, 2)
+/* Endpoint type: isochronous. */
+#define EPX_CON_TYPE_ISOC	0x4
+/* Endpoint type: bulk. */
+#define EPX_CON_TYPE_BULK	0x8
+/* Endpoint type: interrupt. */
+#define EPX_CON_TYPE_INT	0xC
+/* Number of packets per microframe. */
+#define EPX_CON_ISOD		GENMASK(5, 4)
+#define EPX_CON_ISOD_SHIFT	0x4
+/* Endpoint stall bit. */
+#define EPX_CON_STALL		BIT(6)
+/* Endpoint enable bit.*/
+#define EPX_CON_VAL		BIT(7)
+
+/* rxcs/txcs - endpoint control and status bitmasks. */
+/* Data sequence error for the ISO endpoint. */
+#define EPX_CS_ERR(p)		((p) & BIT(0))
+
+/**
+ * struct cdns2_epx_regs - endpoint 1..15 related registers.
+ * @reserved: reserved.
+ * @ep: none control endpoints array.
+ * @reserved2: reserved.
+ * @endprst: endpoint reset register.
+ * @reserved3: reserved.
+ * @isoautoarm: ISO auto-arm register.
+ * @reserved4: reserved.
+ * @isodctrl: ISO control register.
+ * @reserved5: reserved.
+ * @isoautodump: ISO auto dump enable register.
+ * @reserved6: reserved.
+ * @rxmaxpack: receive (OUT) Max packet size register.
+ * @reserved7: reserved.
+ * @rxstaddr: receive (OUT) start address endpoint buffer register.
+ * @reserved8: reserved.
+ * @txstaddr: transmit (IN) start address endpoint buffer register.
+ * @reserved9: reserved.
+ * @txmaxpack: transmit (IN) Max packet size register.
+ */
+struct cdns2_epx_regs {
+	__le32 reserved[2];
+	struct cdns2_epx_base ep[15];
+	__u8 reserved2[290];
+	__u8 endprst;
+	__u8 reserved3[41];
+	__le16 isoautoarm;
+	__u8 reserved4[10];
+	__le16 isodctrl;
+	__le16 reserved5;
+	__le16 isoautodump;
+	__le32 reserved6;
+	__le16 rxmaxpack[15];
+	__le32 reserved7[65];
+	__le32 rxstaddr[15];
+	__u8 reserved8[4];
+	__le32 txstaddr[15];
+	__u8 reserved9[98];
+	__le16 txmaxpack[15];
+} __packed __aligned(4);
+
+/* ENDPRST - bitmasks. */
+/* Endpoint number. */
+#define ENDPRST_EP	GENMASK(3, 0)
+/* IN direction bit. */
+#define ENDPRST_IO_TX	BIT(4)
+/* Toggle reset bit. */
+#define ENDPRST_TOGRST	BIT(5)
+/* FIFO reset bit. */
+#define ENDPRST_FIFORST	BIT(6)
+/* Toggle status and reset bit. */
+#define ENDPRST_TOGSETQ	BIT(7)
+
+/**
+ * struct cdns2_interrupt_regs - USB interrupt related registers.
+ * @reserved: reserved.
+ * @usbirq: USB interrupt request register.
+ * @extirq: external interrupt request register.
+ * @rxpngirq: external interrupt request register.
+ * @reserved1: reserved.
+ * @usbien: USB interrupt enable register.
+ * @extien: external interrupt enable register.
+ * @reserved2: reserved.
+ * @usbivect: USB interrupt vector register.
+ */
+struct cdns2_interrupt_regs {
+	__u8 reserved[396];
+	__u8 usbirq;
+	__u8 extirq;
+	__le16 rxpngirq;
+	__le16 reserved1[4];
+	__u8 usbien;
+	__u8 extien;
+	__le16 reserved2[3];
+	__u8 usbivect;
+} __packed __aligned(4);
+
+/* EXTIRQ and EXTIEN - bitmasks. */
+/* VBUS fault fall interrupt. */
+#define EXTIRQ_VBUSFAULT_FALL BIT(0)
+/* VBUS fault fall interrupt. */
+#define EXTIRQ_VBUSFAULT_RISE BIT(1)
+/* Wake up interrupt bit. */
+#define EXTIRQ_WAKEUP	BIT(7)
+
+/* USBIEN and USBIRQ - bitmasks. */
+/* SETUP data valid interrupt bit.*/
+#define USBIRQ_SUDAV	BIT(0)
+/* Start-of-frame interrupt bit. */
+#define USBIRQ_SOF	BIT(1)
+/* SETUP token interrupt bit. */
+#define USBIRQ_SUTOK	BIT(2)
+/* USB suspend interrupt bit. */
+#define USBIRQ_SUSPEND	BIT(3)
+/* USB reset interrupt bit. */
+#define USBIRQ_URESET	BIT(4)
+/* USB high-speed mode interrupt bit. */
+#define USBIRQ_HSPEED	BIT(5)
+/* Link Power Management interrupt bit. */
+#define USBIRQ_LPM	BIT(7)
+
+#define USB_IEN_INIT (USBIRQ_SUDAV | USBIRQ_SUSPEND | USBIRQ_URESET \
+		      | USBIRQ_HSPEED | USBIRQ_LPM)
+/**
+ * struct cdns2_usb_regs - USB controller registers.
+ * @reserved: reserved.
+ * @lpmctrl: LPM control register.
+ * @lpmclock: LPM clock register.
+ * @reserved2: reserved.
+ * @endprst: endpoint reset register.
+ * @usbcs: USB control and status register.
+ * @frmnr: USB frame counter register.
+ * @fnaddr: function Address register.
+ * @clkgate: clock gate register.
+ * @fifoctrl: FIFO control register.
+ * @speedctrl: speed Control register.
+ * @sleep_clkgate: sleep Clock Gate register.
+ * @reserved3: reserved.
+ * @cpuctrl: microprocessor control register.
+ */
+struct cdns2_usb_regs {
+	__u8 reserved[4];
+	__u16 lpmctrl;
+	__u8 lpmclock;
+	__u8 reserved2[411];
+	__u8 endprst;
+	__u8 usbcs;
+	__le16 frmnr;
+	__u8 fnaddr;
+	__u8 clkgate;
+	__u8 fifoctrl;
+	__u8 speedctrl;
+	__u8 sleep_clkgate;
+	__u8 reserved3[533];
+	__u8 cpuctrl;
+} __packed __aligned(4);
+
+/* LPMCTRL - bitmasks. */
+/* BESL (Best Effort Service Latency). */
+#define LPMCTRLLL_HIRD		GENMASK(7, 4)
+/* Last received Remote Wakeup field from LPM Extended Token packet. */
+#define LPMCTRLLH_BREMOTEWAKEUP	BIT(8)
+/* Reflects value of the lpmnyet bit located in the usbcs[1] register. */
+#define LPMCTRLLH_LPMNYET	BIT(16)
+
+/* LPMCLOCK - bitmasks. */
+/*
+ * If bit is 1 the controller automatically turns off clock
+ * (utmisleepm goes to low), else the microprocessor should use
+ * sleep clock gate register to turn off clock.
+ */
+#define LPMCLOCK_SLEEP_ENTRY	BIT(7)
+
+/* USBCS - bitmasks. */
+/* Send NYET handshake for the LPM transaction. */
+#define USBCS_LPMNYET		BIT(2)
+/* Remote wake-up bit. */
+#define USBCS_SIGRSUME		BIT(5)
+/* Software disconnect bit. */
+#define USBCS_DISCON		BIT(6)
+/* Indicates that a wakeup pin resumed the controller. */
+#define USBCS_WAKESRC		BIT(7)
+
+/* FIFOCTRL - bitmasks. */
+/* Endpoint number. */
+#define FIFOCTRL_EP		GENMASK(3, 0)
+/* Direction bit. */
+#define FIFOCTRL_IO_TX		BIT(4)
+/* FIFO auto bit. */
+#define FIFOCTRL_FIFOAUTO	BIT(5)
+/* FIFO commit bit. */
+#define FIFOCTRL_FIFOCMIT	BIT(6)
+/* FIFO access bit. */
+#define FIFOCTRL_FIFOACC	BIT(7)
+
+/* SPEEDCTRL - bitmasks. */
+/* Device works in Full Speed. */
+#define SPEEDCTRL_FS		BIT(1)
+/* Device works in High Speed. */
+#define SPEEDCTRL_HS		BIT(2)
+/* Force FS mode. */
+#define SPEEDCTRL_HSDISABLE	BIT(7)
+
+/* CPUCTRL- bitmasks. */
+/* Controller reset bit. */
+#define CPUCTRL_SW_RST		BIT(1)
+
+/**
+ * struct cdns2_adma_regs - ADMA controller registers.
+ * @conf: DMA global configuration register.
+ * @sts: DMA global Status register.
+ * @reserved1: reserved.
+ * @ep_sel: DMA endpoint select register.
+ * @ep_traddr: DMA endpoint transfer ring address register.
+ * @ep_cfg: DMA endpoint configuration register.
+ * @ep_cmd: DMA endpoint command register.
+ * @ep_sts: DMA endpoint status register.
+ * @reserved2: reserved.
+ * @ep_sts_en: DMA endpoint status enable register.
+ * @drbl: DMA doorbell register.
+ * @ep_ien: DMA endpoint interrupt enable register.
+ * @ep_ists: DMA endpoint interrupt status register.
+ * @axim_ctrl: AXI Master Control register.
+ * @axim_id: AXI Master ID register.
+ * @reserved3: reserved.
+ * @axim_cap: AXI Master Wrapper Extended Capability.
+ * @reserved4: reserved.
+ * @axim_ctrl0: AXI Master Wrapper Extended Capability Control Register 0.
+ * @axim_ctrl1: AXI Master Wrapper Extended Capability Control Register 1.
+ */
+struct cdns2_adma_regs {
+	__le32 conf;
+	__le32 sts;
+	__le32 reserved1[5];
+	__le32 ep_sel;
+	__le32 ep_traddr;
+	__le32 ep_cfg;
+	__le32 ep_cmd;
+	__le32 ep_sts;
+	__le32 reserved2;
+	__le32 ep_sts_en;
+	__le32 drbl;
+	__le32 ep_ien;
+	__le32 ep_ists;
+	__le32 axim_ctrl;
+	__le32 axim_id;
+	__le32 reserved3;
+	__le32 axim_cap;
+	__le32 reserved4;
+	__le32 axim_ctrl0;
+	__le32 axim_ctrl1;
+};
+
+#define CDNS2_ADMA_REGS_OFFSET	0x400
+
+/* DMA_CONF - bitmasks. */
+/* Reset USB device configuration. */
+#define DMA_CONF_CFGRST		BIT(0)
+/* Singular DMA transfer mode.*/
+#define DMA_CONF_DSING		BIT(8)
+/* Multiple DMA transfers mode.*/
+#define DMA_CONF_DMULT		BIT(9)
+
+/* DMA_EP_CFG - bitmasks. */
+/* Endpoint enable. */
+#define DMA_EP_CFG_ENABLE	BIT(0)
+
+/* DMA_EP_CMD - bitmasks. */
+/* Endpoint reset. */
+#define DMA_EP_CMD_EPRST	BIT(0)
+/* Transfer descriptor ready. */
+#define DMA_EP_CMD_DRDY		BIT(6)
+/* Data flush. */
+#define DMA_EP_CMD_DFLUSH	BIT(7)
+
+/* DMA_EP_STS - bitmasks. */
+/* Interrupt On Complete. */
+#define DMA_EP_STS_IOC		BIT(2)
+/* Interrupt on Short Packet. */
+#define DMA_EP_STS_ISP		BIT(3)
+/* Transfer descriptor missing. */
+#define DMA_EP_STS_DESCMIS	BIT(4)
+/* TRB error. */
+#define DMA_EP_STS_TRBERR	BIT(7)
+/* DMA busy bit. */
+#define DMA_EP_STS_DBUSY	BIT(9)
+/* Current Cycle Status. */
+#define DMA_EP_STS_CCS(p)	((p) & BIT(11))
+/* OUT size mismatch. */
+#define DMA_EP_STS_OUTSMM	BIT(14)
+/* ISO transmission error. */
+#define DMA_EP_STS_ISOERR	BIT(15)
+
+/* DMA_EP_STS_EN - bitmasks. */
+/* OUT transfer missing descriptor enable. */
+#define DMA_EP_STS_EN_DESCMISEN	BIT(4)
+/* TRB enable. */
+#define DMA_EP_STS_EN_TRBERREN	BIT(7)
+/* OUT size mismatch enable. */
+#define DMA_EP_STS_EN_OUTSMMEN	BIT(14)
+/* ISO transmission error enable. */
+#define DMA_EP_STS_EN_ISOERREN	BIT(15)
+
+/* DMA_EP_IEN - bitmasks. */
+#define DMA_EP_IEN(index)	(1 << (index))
+#define DMA_EP_IEN_EP_OUT0	BIT(0)
+#define DMA_EP_IEN_EP_IN0	BIT(16)
+
+/* DMA_EP_ISTS - bitmasks. */
+#define DMA_EP_ISTS(index)	(1 << (index))
+#define DMA_EP_ISTS_EP_OUT0	BIT(0)
+#define DMA_EP_ISTS_EP_IN0	BIT(16)
+
+#define gadget_to_cdns2_device(g) (container_of(g, struct cdns2_device, gadget))
+#define ep_to_cdns2_ep(ep) (container_of(ep, struct cdns2_endpoint, endpoint))
+
+/*-------------------------------------------------------------------------*/
+#define TRBS_PER_SEGMENT	600
+#define ISO_MAX_INTERVAL	8
+#define MAX_TRB_LENGTH		BIT(16)
+#define MAX_ISO_SIZE		3076
+/*
+ * To improve performance the TRB buffer pointers can't cross
+ * 4KB boundaries.
+ */
+#define TRB_MAX_ISO_BUFF_SHIFT	12
+#define TRB_MAX_ISO_BUFF_SIZE	BIT(TRB_MAX_ISO_BUFF_SHIFT)
+/* How much data is left before the 4KB boundary? */
+#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_ISO_BUFF_SIZE - \
+					((addr) & (TRB_MAX_ISO_BUFF_SIZE - 1)))
+
+#if TRBS_PER_SEGMENT < 2
+#error "Incorrect TRBS_PER_SEGMENT. Minimal Transfer Ring size is 2."
+#endif
+
+/**
+ * struct cdns2_trb - represent Transfer Descriptor block.
+ * @buffer: pointer to buffer data.
+ * @length: length of data.
+ * @control: control flags.
+ *
+ * This structure describes transfer block handled by DMA module.
+ */
+struct cdns2_trb {
+	__le32 buffer;
+	__le32 length;
+	__le32 control;
+};
+
+#define TRB_SIZE		(sizeof(struct cdns2_trb))
+/*
+ * These two extra TRBs are reserved for isochronous transfer
+ * to inject 0 length packet and extra LINK TRB to synchronize the ISO transfer.
+ */
+#define TRB_ISO_RESERVED	2
+#define TR_SEG_SIZE		(TRB_SIZE * (TRBS_PER_SEGMENT + TRB_ISO_RESERVED))
+
+/* TRB bit mask. */
+#define TRB_TYPE_BITMASK	GENMASK(15, 10)
+#define TRB_TYPE(p)		((p) << 10)
+#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
+
+/* TRB type IDs. */
+/* Used for Bulk, Interrupt, ISOC, and control data stage. */
+#define TRB_NORMAL		1
+/* TRB for linking ring segments. */
+#define TRB_LINK		6
+
+/* Cycle bit - indicates TRB ownership by driver or hw. */
+#define TRB_CYCLE		BIT(0)
+/*
+ * When set to '1', the device will toggle its interpretation of the Cycle bit.
+ */
+#define TRB_TOGGLE		BIT(1)
+/* Interrupt on short packet. */
+#define TRB_ISP			BIT(2)
+/* Chain bit associate this TRB with next one TRB. */
+#define TRB_CHAIN		BIT(4)
+/* Interrupt on completion. */
+#define TRB_IOC			BIT(5)
+
+/* Transfer_len bitmasks. */
+#define TRB_LEN(p)		((p) & GENMASK(16, 0))
+#define TRB_BURST(p)		(((p) << 24) & GENMASK(31, 24))
+#define TRB_FIELD_TO_BURST(p)	(((p) & GENMASK(31, 24)) >> 24)
+
+/* Data buffer pointer bitmasks. */
+#define TRB_BUFFER(p)		((p) & GENMASK(31, 0))
+
+/*-------------------------------------------------------------------------*/
+/* Driver numeric constants. */
+
+/* Maximum address that can be assigned to device. */
+#define USB_DEVICE_MAX_ADDRESS	127
+
+/* One control and 15 IN and 15 OUT endpoints. */
+#define CDNS2_ENDPOINTS_NUM	31
+
+#define CDNS2_EP_ZLP_BUF_SIZE	512
+
+/*-------------------------------------------------------------------------*/
+/* Used structures. */
+
+struct cdns2_device;
+
+/**
+ * struct cdns2_ring - transfer ring representation.
+ * @trbs: pointer to transfer ring.
+ * @dma: dma address of transfer ring.
+ * @free_trbs: number of free TRBs in transfer ring.
+ * @pcs: producer cycle state.
+ * @ccs: consumer cycle state.
+ * @enqueue: enqueue index in transfer ring.
+ * @dequeue: dequeue index in transfer ring.
+ */
+struct cdns2_ring {
+	struct cdns2_trb *trbs;
+	dma_addr_t dma;
+	int free_trbs;
+	u8 pcs;
+	u8 ccs;
+	int enqueue;
+	int dequeue;
+};
+
+/**
+ * struct cdns2_endpoint - extended device side representation of USB endpoint.
+ * @endpoint: usb endpoint.
+ * @pending_list: list of requests queuing on transfer ring.
+ * @deferred_list: list of requests waiting for queuing on transfer ring.
+ * @pdev: device associated with endpoint.
+ * @name: a human readable name e.g. ep1out.
+ * @ring: transfer ring associated with endpoint.
+ * @ep_state: state of endpoint.
+ * @idx: index of endpoint in pdev->eps table.
+ * @dir: endpoint direction.
+ * @num: endpoint number (1 - 15).
+ * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK.
+ * @interval: interval between packets used for ISOC and Interrupt endpoint.
+ * @buffering: on-chip buffers assigned to endpoint.
+ * @trb_burst_size: number of burst used in TRB.
+ * @skip: Sometimes the controller cannot process isochronous endpoint ring
+ *        quickly enough and it will miss some isoc tds on the ring and
+ *        generate ISO transmition error.
+ *        Driver sets skip flag when receive a ISO transmition error and
+ *        process the missed TDs on the endpoint ring.
+ * @wa1_set: use WA1.
+ * @wa1_trb: TRB assigned to WA1.
+ * @wa1_trb_index: TRB index for WA1.
+ * @wa1_cycle_bit: correct cycle bit for WA1.
+ */
+struct cdns2_endpoint {
+	struct usb_ep endpoint;
+	struct list_head pending_list;
+	struct list_head deferred_list;
+
+	struct cdns2_device	*pdev;
+	char name[20];
+
+	struct cdns2_ring ring;
+
+#define EP_ENABLED		BIT(0)
+#define EP_STALLED		BIT(1)
+#define EP_STALL_PENDING	BIT(2)
+#define EP_WEDGE		BIT(3)
+#define	EP_CLAIMED		BIT(4)
+#define EP_RING_FULL		BIT(5)
+#define EP_DEFERRED_DRDY	BIT(6)
+
+	u32 ep_state;
+
+	u8 idx;
+	u8 dir;
+	u8 num;
+	u8 type;
+	int interval;
+	u8 buffering;
+	u8 trb_burst_size;
+	bool skip;
+
+	unsigned int wa1_set:1;
+	struct cdns2_trb *wa1_trb;
+	unsigned int wa1_trb_index;
+	unsigned int wa1_cycle_bit:1;
+};
+
+/**
+ * struct cdns2_request - extended device side representation of usb_request
+ *                        object.
+ * @request: generic usb_request object describing single I/O request.
+ * @pep: extended representation of usb_ep object.
+ * @trb: the first TRB association with this request.
+ * @start_trb: number of the first TRB in transfer ring.
+ * @end_trb: number of the last TRB in transfer ring.
+ * @list: used for queuing request in lists.
+ * @finished_trb: number of trb has already finished per request.
+ * @num_of_trb: how many trbs are associated with request.
+ */
+struct cdns2_request {
+	struct usb_request request;
+	struct cdns2_endpoint *pep;
+	struct cdns2_trb *trb;
+	int start_trb;
+	int end_trb;
+	struct list_head list;
+	int finished_trb;
+	int num_of_trb;
+};
+
+#define to_cdns2_request(r) (container_of(r, struct cdns2_request, request))
+
+/* Stages used during enumeration process.*/
+#define CDNS2_SETUP_STAGE		0x0
+#define CDNS2_DATA_STAGE		0x1
+#define CDNS2_STATUS_STAGE		0x2
+
+/**
+ * struct cdns2_device - represent USB device.
+ * @dev: pointer to device structure associated whit this controller.
+ * @gadget: device side representation of the peripheral controller.
+ * @gadget_driver: pointer to the gadget driver.
+ * @lock: for synchronizing.
+ * @irq: interrupt line number.
+ * @regs: base address for registers
+ * @usb_regs: base address for common USB registers.
+ * @ep0_regs: base address for endpoint 0 related registers.
+ * @epx_regs: base address for all none control endpoint registers.
+ * @interrupt_regs: base address for interrupt handling related registers.
+ * @adma_regs: base address for ADMA registers.
+ * @eps_dma_pool: endpoint Transfer Ring pool.
+ * @setup: used while processing usb control requests.
+ * @ep0_preq: private request used while handling EP0.
+ * @ep0_stage: ep0 stage during enumeration process.
+ * @zlp_buf: zlp buffer.
+ * @dev_address: device address assigned by host.
+ * @eps: array of objects describing endpoints.
+ * @selected_ep: actually selected endpoint. It's used only to improve
+ *      performance by limiting access to dma_ep_sel register.
+ * @is_selfpowered: device is self powered.
+ * @may_wakeup: allows device to remote wakeup the host.
+ * @status_completion_no_call: indicate that driver is waiting for status
+ *      stage completion. It's used in deferred SET_CONFIGURATION request.
+ * @in_lpm: indicate the controller is in low power mode.
+ * @pending_status_wq: workqueue handling status stage for deferred requests.
+ * @pending_status_request: request for which status stage was deferred.
+ * @eps_supported: endpoints supported by controller in form:
+ *      bit: 0 - ep0, 1 - epOut1, 2 - epIn1, 3 - epOut2 ...
+ * @burst_opt: array with the best burst size value for different TRB size.
+ * @onchip_tx_buf: size of transmit on-chip buffer in KB.
+ * @onchip_rx_buf: size of receive on-chip buffer in KB.
+ */
+struct cdns2_device {
+	struct device *dev;
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *gadget_driver;
+
+	/* generic spin-lock for drivers */
+	spinlock_t lock;
+	int irq;
+	void __iomem *regs;
+	struct cdns2_usb_regs __iomem *usb_regs;
+	struct cdns2_ep0_regs __iomem *ep0_regs;
+	struct cdns2_epx_regs __iomem *epx_regs;
+	struct cdns2_interrupt_regs __iomem *interrupt_regs;
+	struct cdns2_adma_regs __iomem *adma_regs;
+	struct dma_pool *eps_dma_pool;
+	struct usb_ctrlrequest setup;
+	struct cdns2_request ep0_preq;
+	u8 ep0_stage;
+	void *zlp_buf;
+	u8 dev_address;
+	struct cdns2_endpoint eps[CDNS2_ENDPOINTS_NUM];
+	u32 selected_ep;
+	bool is_selfpowered;
+	bool may_wakeup;
+	bool status_completion_no_call;
+	bool in_lpm;
+	struct work_struct pending_status_wq;
+	struct usb_request *pending_status_request;
+	u32 eps_supported;
+	u8 burst_opt[MAX_ISO_SIZE + 1];
+
+	/*in KB */
+	u16 onchip_tx_buf;
+	u16 onchip_rx_buf;
+};
+
+#define CDNS2_IF_EP_EXIST(pdev, ep_num, dir) \
+			 ((pdev)->eps_supported & \
+			 (BIT(ep_num) << ((dir) ? 0 : 16)))
+
+dma_addr_t cdns2_trb_virt_to_dma(struct cdns2_endpoint *pep,
+				 struct cdns2_trb *trb);
+void cdns2_pending_setup_status_handler(struct work_struct *work);
+void cdns2_select_ep(struct cdns2_device *pdev, u32 ep);
+struct cdns2_request *cdns2_next_preq(struct list_head *list);
+struct usb_request *cdns2_gadget_ep_alloc_request(struct usb_ep *ep,
+						  gfp_t gfp_flags);
+void cdns2_gadget_ep_free_request(struct usb_ep *ep,
+				  struct usb_request *request);
+int cdns2_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request);
+void cdns2_gadget_giveback(struct cdns2_endpoint *pep,
+			   struct cdns2_request *priv_req,
+			   int status);
+void cdns2_init_ep0(struct cdns2_device *pdev, struct cdns2_endpoint *pep);
+void cdns2_ep0_config(struct cdns2_device *pdev);
+void cdns2_handle_ep0_interrupt(struct cdns2_device *pdev, int dir);
+void cdns2_handle_setup_packet(struct cdns2_device *pdev);
+int cdns2_gadget_resume(struct cdns2_device *pdev, bool hibernated);
+int cdns2_gadget_suspend(struct cdns2_device *pdev);
+void cdns2_gadget_remove(struct cdns2_device *pdev);
+int cdns2_gadget_init(struct cdns2_device *pdev);
+void set_reg_bit_8(void __iomem *ptr, u8 mask);
+int cdns2_halt_endpoint(struct cdns2_device *pdev, struct cdns2_endpoint *pep,
+			int value);
+
+#endif /* __LINUX_CDNS2_GADGET */
-- 
2.39.2

Re: [PATCH AUTOSEL 6.4 12/40] usb: cdns2: Device side header file for CDNS2 driver

[Greg Kroah-Hartman]

On Sun, Jul 23, 2023 at 09:31:12PM -0400, Sasha Levin wrote:
> From: Pawel Laszczak <pawell@cadence.com>
> 
> [ Upstream commit 0ca2026eea104adc1d0d356bca35915a1ab6e3e9 ]
> 
> Patch defines macros, registers and structures used by
> Device side driver.
> 
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> Message-ID: <20230602102644.77470-2-pawell@cadence.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/usb/gadget/udc/cdns2/cdns2-gadget.h | 707 ++++++++++++++++++++
>  1 file changed, 707 insertions(+)
>  create mode 100644 drivers/usb/gadget/udc/cdns2/cdns2-gadget.h
> 

Not needed, you can drop this from all branches, thanks.

greg k-h

[PATCH AUTOSEL 6.4 13/40] usb: chipidea: imx: turn off vbus comparator when suspend

[Sasha Levin]

From: Xu Yang <xu.yang_2@nxp.com>

[ Upstream commit 0ac37fbdad7087bbcbbe246a602c248ccfd954ea ]

As we use bvalid for vbus wakeup source, to save power when
suspend, turn off the vbus comparator for imx7d and imx8mm.

Below is this bit description from RM of iMX8MM
"VBUS Valid Comparator Enable:

This signal controls the USB OTG PHY VBUS Valid comparator which
indicates whether the voltage on the USB_OTG*_VBUS pin is below
the VBUS Valid threshold. The VBUS Valid threshold is nominally
4.75V on this USB PHY. The VBUS Valid threshold can be adjusted
using the USBNC_OTGn_PHY_CFG1[OTGTUNE0] bit field. Status of the
VBUS Valid comparator, when it is enabled, is reported on the
USBNC_OTGn_PHY_STATUS[VBUS_VLD] bit.
When OTGDISABLE0 (USBNC_USB_OTGx_PHY_CFG2[10])is set to 1'b0 and
DRVVBUS0 is set to 1'b1, the Bandgap circuitry and VBUS Valid
comparator are powered, even in Suspend or Sleep mode.
DRVVBUS0 should be reset to 1'b0 when the internal VBUS Valid comparator
is not required, to reduce quiescent current in Suspend or Sleep mode.
 - 0 The VBUS Valid comparator is disabled
  - 1 The VBUS Valid comparator is enabled"

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230517081907.3410465-2-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/chipidea/usbmisc_imx.c | 35 ++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index c57c1a71a5132..0938e274ba3a8 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -152,6 +152,7 @@ struct usbmisc_ops {
 	int (*charger_detection)(struct imx_usbmisc_data *data);
 	/* It's called when system resume from usb power lost */
 	int (*power_lost_check)(struct imx_usbmisc_data *data);
+	void (*vbus_comparator_on)(struct imx_usbmisc_data *data, bool on);
 };
 
 struct imx_usbmisc {
@@ -875,6 +876,33 @@ static int imx7d_charger_detection(struct imx_usbmisc_data *data)
 	return ret;
 }
 
+static void usbmisc_imx7d_vbus_comparator_on(struct imx_usbmisc_data *data,
+					     bool on)
+{
+	unsigned long flags;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	u32 val;
+
+	if (data->hsic)
+		return;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	/*
+	 * Disable VBUS valid comparator when in suspend mode,
+	 * when OTG is disabled and DRVVBUS0 is asserted case
+	 * the Bandgap circuitry and VBUS Valid comparator are
+	 * still powered, even in Suspend or Sleep mode.
+	 */
+	val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	if (on)
+		val |= MX7D_USB_OTG_PHY_CFG2_DRVVBUS0;
+	else
+		val &= ~MX7D_USB_OTG_PHY_CFG2_DRVVBUS0;
+
+	writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+}
+
 static int usbmisc_imx7ulp_init(struct imx_usbmisc_data *data)
 {
 	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
@@ -1018,6 +1046,7 @@ static const struct usbmisc_ops imx7d_usbmisc_ops = {
 	.set_wakeup = usbmisc_imx7d_set_wakeup,
 	.charger_detection = imx7d_charger_detection,
 	.power_lost_check = usbmisc_imx7d_power_lost_check,
+	.vbus_comparator_on = usbmisc_imx7d_vbus_comparator_on,
 };
 
 static const struct usbmisc_ops imx7ulp_usbmisc_ops = {
@@ -1132,6 +1161,9 @@ int imx_usbmisc_suspend(struct imx_usbmisc_data *data, bool wakeup)
 
 	usbmisc = dev_get_drvdata(data->dev);
 
+	if (usbmisc->ops->vbus_comparator_on)
+		usbmisc->ops->vbus_comparator_on(data, false);
+
 	if (wakeup && usbmisc->ops->set_wakeup)
 		ret = usbmisc->ops->set_wakeup(data, true);
 	if (ret) {
@@ -1185,6 +1217,9 @@ int imx_usbmisc_resume(struct imx_usbmisc_data *data, bool wakeup)
 		goto hsic_set_clk_fail;
 	}
 
+	if (usbmisc->ops->vbus_comparator_on)
+		usbmisc->ops->vbus_comparator_on(data, true);
+
 	return 0;
 
 hsic_set_clk_fail:
-- 
2.39.2

[PATCH AUTOSEL 6.4 14/40] usb: chipidea: imx: add missing USB PHY DPDM wakeup setting

[Sasha Levin]

From: Xu Yang <xu.yang_2@nxp.com>

[ Upstream commit 53d061c19dc4cb68409df6dc11c40389c8c42a75 ]

USB PHY DPDM wakeup bit is enabled by default, when USB wakeup
is not required(/sys/.../wakeup is disabled), this bit should be
disabled, otherwise we will have unexpected wakeup if do USB device
connect/disconnect while system sleep.
This bit can be enabled for both host and device mode.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230517081907.3410465-3-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/chipidea/usbmisc_imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 0938e274ba3a8..681c2ddc83fa5 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -135,7 +135,7 @@
 #define TXVREFTUNE0_MASK		(0xf << 20)
 
 #define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
-				 MX6_BM_ID_WAKEUP)
+				 MX6_BM_ID_WAKEUP | MX6SX_BM_DPDM_WAKEUP_EN)
 
 struct usbmisc_ops {
 	/* It's called once when probe a usb device */
-- 
2.39.2

[PATCH AUTOSEL 6.4 15/40] gfs2: Fix possible data races in gfs2_show_options()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit 6fa0a72cbbe45db4ed967a51f9e6f4e3afe61d20 ]

Some fields such as gt_logd_secs of the struct gfs2_tune are accessed
without holding the lock gt_spin in gfs2_show_options():

  val = sdp->sd_tune.gt_logd_secs;
  if (val != 30)
    seq_printf(s, ",commit=%d", val);

And thus can cause data races when gfs2_show_options() and other functions
such as gfs2_reconfigure() are concurrently executed:

  spin_lock(&gt->gt_spin);
  gt->gt_logd_secs = newargs->ar_commit;

To fix these possible data races, the lock sdp->sd_tune.gt_spin is
acquired before accessing the fields of gfs2_tune and released after these
accesses.

Further changes by Andreas:

- Don't hold the spin lock over the seq_printf operations.

Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/super.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index a84bf6444bba9..204ba7f8417e6 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -1004,7 +1004,14 @@ static int gfs2_show_options(struct seq_file *s, struct dentry *root)
 {
 	struct gfs2_sbd *sdp = root->d_sb->s_fs_info;
 	struct gfs2_args *args = &sdp->sd_args;
-	int val;
+	unsigned int logd_secs, statfs_slow, statfs_quantum, quota_quantum;
+
+	spin_lock(&sdp->sd_tune.gt_spin);
+	logd_secs = sdp->sd_tune.gt_logd_secs;
+	quota_quantum = sdp->sd_tune.gt_quota_quantum;
+	statfs_quantum = sdp->sd_tune.gt_statfs_quantum;
+	statfs_slow = sdp->sd_tune.gt_statfs_slow;
+	spin_unlock(&sdp->sd_tune.gt_spin);
 
 	if (is_ancestor(root, sdp->sd_master_dir))
 		seq_puts(s, ",meta");
@@ -1059,17 +1066,14 @@ static int gfs2_show_options(struct seq_file *s, struct dentry *root)
 	}
 	if (args->ar_discard)
 		seq_puts(s, ",discard");
-	val = sdp->sd_tune.gt_logd_secs;
-	if (val != 30)
-		seq_printf(s, ",commit=%d", val);
-	val = sdp->sd_tune.gt_statfs_quantum;
-	if (val != 30)
-		seq_printf(s, ",statfs_quantum=%d", val);
-	else if (sdp->sd_tune.gt_statfs_slow)
+	if (logd_secs != 30)
+		seq_printf(s, ",commit=%d", logd_secs);
+	if (statfs_quantum != 30)
+		seq_printf(s, ",statfs_quantum=%d", statfs_quantum);
+	else if (statfs_slow)
 		seq_puts(s, ",statfs_quantum=0");
-	val = sdp->sd_tune.gt_quota_quantum;
-	if (val != 60)
-		seq_printf(s, ",quota_quantum=%d", val);
+	if (quota_quantum != 60)
+		seq_printf(s, ",quota_quantum=%d", quota_quantum);
 	if (args->ar_statfs_percent)
 		seq_printf(s, ",statfs_percent=%d", args->ar_statfs_percent);
 	if (args->ar_errors != GFS2_ERRORS_DEFAULT) {
-- 
2.39.2

[Cluster-devel] [PATCH AUTOSEL 6.4 15/40] gfs2: Fix possible data races in gfs2_show_options()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit 6fa0a72cbbe45db4ed967a51f9e6f4e3afe61d20 ]

Some fields such as gt_logd_secs of the struct gfs2_tune are accessed
without holding the lock gt_spin in gfs2_show_options():

  val = sdp->sd_tune.gt_logd_secs;
  if (val != 30)
    seq_printf(s, ",commit=%d", val);

And thus can cause data races when gfs2_show_options() and other functions
such as gfs2_reconfigure() are concurrently executed:

  spin_lock(&gt->gt_spin);
  gt->gt_logd_secs = newargs->ar_commit;

To fix these possible data races, the lock sdp->sd_tune.gt_spin is
acquired before accessing the fields of gfs2_tune and released after these
accesses.

Further changes by Andreas:

- Don't hold the spin lock over the seq_printf operations.

Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/super.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index a84bf6444bba9..204ba7f8417e6 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -1004,7 +1004,14 @@ static int gfs2_show_options(struct seq_file *s, struct dentry *root)
 {
 	struct gfs2_sbd *sdp = root->d_sb->s_fs_info;
 	struct gfs2_args *args = &sdp->sd_args;
-	int val;
+	unsigned int logd_secs, statfs_slow, statfs_quantum, quota_quantum;
+
+	spin_lock(&sdp->sd_tune.gt_spin);
+	logd_secs = sdp->sd_tune.gt_logd_secs;
+	quota_quantum = sdp->sd_tune.gt_quota_quantum;
+	statfs_quantum = sdp->sd_tune.gt_statfs_quantum;
+	statfs_slow = sdp->sd_tune.gt_statfs_slow;
+	spin_unlock(&sdp->sd_tune.gt_spin);
 
 	if (is_ancestor(root, sdp->sd_master_dir))
 		seq_puts(s, ",meta");
@@ -1059,17 +1066,14 @@ static int gfs2_show_options(struct seq_file *s, struct dentry *root)
 	}
 	if (args->ar_discard)
 		seq_puts(s, ",discard");
-	val = sdp->sd_tune.gt_logd_secs;
-	if (val != 30)
-		seq_printf(s, ",commit=%d", val);
-	val = sdp->sd_tune.gt_statfs_quantum;
-	if (val != 30)
-		seq_printf(s, ",statfs_quantum=%d", val);
-	else if (sdp->sd_tune.gt_statfs_slow)
+	if (logd_secs != 30)
+		seq_printf(s, ",commit=%d", logd_secs);
+	if (statfs_quantum != 30)
+		seq_printf(s, ",statfs_quantum=%d", statfs_quantum);
+	else if (statfs_slow)
 		seq_puts(s, ",statfs_quantum=0");
-	val = sdp->sd_tune.gt_quota_quantum;
-	if (val != 60)
-		seq_printf(s, ",quota_quantum=%d", val);
+	if (quota_quantum != 60)
+		seq_printf(s, ",quota_quantum=%d", quota_quantum);
 	if (args->ar_statfs_percent)
 		seq_printf(s, ",statfs_percent=%d", args->ar_statfs_percent);
 	if (args->ar_errors != GFS2_ERRORS_DEFAULT) {
-- 
2.39.2

[PATCH AUTOSEL 6.4 16/40] pcmcia: rsrc_nonstatic: Fix memory leak in nonstatic_release_resource_db()

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit c85fd9422fe0f5d667305efb27f56d09eab120b0 ]

When nonstatic_release_resource_db() frees all resources associated
with an PCMCIA socket, it forgets to free socket_data too, causing
a memory leak observable with kmemleak:

unreferenced object 0xc28d1000 (size 64):
  comm "systemd-udevd", pid 297, jiffies 4294898478 (age 194.484s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 f0 85 0e c3 00 00 00 00  ................
    00 00 00 00 0c 10 8d c2 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffda4245>] __kmem_cache_alloc_node+0x2d7/0x4a0
    [<7e51f0c8>] kmalloc_trace+0x31/0xa4
    [<d52b4ca0>] nonstatic_init+0x24/0x1a4 [pcmcia_rsrc]
    [<a2f13e08>] pcmcia_register_socket+0x200/0x35c [pcmcia_core]
    [<a728be1b>] yenta_probe+0x4d8/0xa70 [yenta_socket]
    [<c48fac39>] pci_device_probe+0x99/0x194
    [<84b7c690>] really_probe+0x181/0x45c
    [<8060fe6e>] __driver_probe_device+0x75/0x1f4
    [<b9b76f43>] driver_probe_device+0x28/0xac
    [<648b766f>] __driver_attach+0xeb/0x1e4
    [<6e9659eb>] bus_for_each_dev+0x61/0xb4
    [<25a669f3>] driver_attach+0x1e/0x28
    [<d8671d6b>] bus_add_driver+0x102/0x20c
    [<df0d323c>] driver_register+0x5b/0x120
    [<942cd8a4>] __pci_register_driver+0x44/0x4c
    [<e536027e>] __UNIQUE_ID___addressable_cleanup_module188+0x1c/0xfffff000 [iTCO_vendor_support]

Fix this by freeing socket_data too.

Tested on a Acer Travelmate 4002WLMi by manually binding/unbinding
the yenta_cardbus driver (yenta_socket).

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Message-ID: <20230512184529.5094-1-W_Armin@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pcmcia/rsrc_nonstatic.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 471e0c5815f39..bf9d070a44966 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -1053,6 +1053,8 @@ static void nonstatic_release_resource_db(struct pcmcia_socket *s)
 		q = p->next;
 		kfree(p);
 	}
+
+	kfree(data);
 }
 
 
-- 
2.39.2

[PATCH AUTOSEL 6.4 17/40] thunderbolt: Add Intel Barlow Ridge PCI ID

[Sasha Levin]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 6f14a210661ce03988ef4ed3c8402037c8e06539 ]

Intel Barlow Ridge is the first USB4 v2 controller from Intel. The
controller exposes standard USB4 PCI class ID in typical configurations,
however there is a way to configure it so that it uses a special class
ID to allow using s different driver than the Windows inbox one. For
this reason add the Barlow Ridge PCI ID to the Linux driver too so that
the driver can attach regardless of the class ID.

Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thunderbolt/nhi.c | 2 ++
 drivers/thunderbolt/nhi.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index e58beac442958..1257d1c41f8e5 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -1480,6 +1480,8 @@ static struct pci_device_id nhi_ids[] = {
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL_P_NHI1),
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_80G_NHI) },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_40G_NHI) },
 
 	/* Any USB4 compliant host */
 	{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_USB4, ~0) },
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index b0718020c6f59..c15a0c46c9cff 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -75,6 +75,8 @@ extern const struct tb_nhi_ops icl_nhi_ops;
 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE	0x15ef
 #define PCI_DEVICE_ID_INTEL_ADL_NHI0			0x463e
 #define PCI_DEVICE_ID_INTEL_ADL_NHI1			0x466d
+#define PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_80G_NHI	0x5781
+#define PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_40G_NHI	0x5784
 #define PCI_DEVICE_ID_INTEL_MTL_M_NHI0			0x7eb2
 #define PCI_DEVICE_ID_INTEL_MTL_P_NHI0			0x7ec2
 #define PCI_DEVICE_ID_INTEL_MTL_P_NHI1			0x7ec3
-- 
2.39.2

[PATCH AUTOSEL 6.4 18/40] thunderbolt: Limit Intel Barlow Ridge USB3 bandwidth

[Sasha Levin]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit f2bfa944080dcbb8eb56259dfd2c07204cbee17e ]

Intel Barlow Ridge discrete USB4 host router has the same limitation as
the previous generations so make sure the USB3 bandwidth limitation
quirk is applied to Barlow Ridge too.

Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thunderbolt/nhi.h    | 2 ++
 drivers/thunderbolt/quirks.c | 8 ++++++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index c15a0c46c9cff..0f029ce758825 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -77,6 +77,8 @@ extern const struct tb_nhi_ops icl_nhi_ops;
 #define PCI_DEVICE_ID_INTEL_ADL_NHI1			0x466d
 #define PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_80G_NHI	0x5781
 #define PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_40G_NHI	0x5784
+#define PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HUB_80G_BRIDGE 0x5786
+#define PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HUB_40G_BRIDGE 0x57a4
 #define PCI_DEVICE_ID_INTEL_MTL_M_NHI0			0x7eb2
 #define PCI_DEVICE_ID_INTEL_MTL_P_NHI0			0x7ec2
 #define PCI_DEVICE_ID_INTEL_MTL_P_NHI1			0x7ec3
diff --git a/drivers/thunderbolt/quirks.c b/drivers/thunderbolt/quirks.c
index 1157b8869bcca..8c2ee431fcde8 100644
--- a/drivers/thunderbolt/quirks.c
+++ b/drivers/thunderbolt/quirks.c
@@ -74,6 +74,14 @@ static const struct tb_quirk tb_quirks[] = {
 		  quirk_usb3_maximum_bandwidth },
 	{ 0x8087, PCI_DEVICE_ID_INTEL_MTL_P_NHI1, 0x0000, 0x0000,
 		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_80G_NHI, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_40G_NHI, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HUB_80G_BRIDGE, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HUB_40G_BRIDGE, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
 	/*
 	 * CLx is not supported on AMD USB4 Yellow Carp and Pink Sardine platforms.
 	 */
-- 
2.39.2

[PATCH AUTOSEL 6.4 19/40] firewire: net: fix use after free in fwnet_finish_incoming_packet()

[Sasha Levin]

From: Zhang Shurong <zhang_shurong@foxmail.com>

[ Upstream commit 3ff256751a2853e1ffaa36958ff933ccc98c6cb5 ]

The netif_rx() function frees the skb so we can't dereference it to
save the skb->len.

Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_3B3D24B66ED66A6BB73CC0E63C6A14E45109@qq.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firewire/net.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 538bd677c254a..7a4d1a478e33e 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -479,7 +479,7 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 					struct sk_buff *skb, u16 source_node_id,
 					bool is_broadcast, u16 ether_type)
 {
-	int status;
+	int status, len;
 
 	switch (ether_type) {
 	case ETH_P_ARP:
@@ -533,13 +533,15 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 		}
 		skb->protocol = protocol;
 	}
+
+	len = skb->len;
 	status = netif_rx(skb);
 	if (status == NET_RX_DROP) {
 		net->stats.rx_errors++;
 		net->stats.rx_dropped++;
 	} else {
 		net->stats.rx_packets++;
-		net->stats.rx_bytes += skb->len;
+		net->stats.rx_bytes += len;
 	}
 
 	return 0;
-- 
2.39.2

[PATCH AUTOSEL 6.4 20/40] watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)

[Sasha Levin]

From: Yuechao Zhao <yuechao.zhao@advantech.com.cn>

[ Upstream commit 009637de1f65cff452ad49554d1e8ef9fda99e43 ]

Add PCI_VENDOR_ID_HYGON(Hygon vendor id [0x1d94]) in this driver

Signed-off-by: Yuechao Zhao <yuechao.zhao@advantech.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20230612031907.796461-1-a345351830@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/sp5100_tco.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index 14f8d8d90920f..2bd3dc25cb030 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -96,7 +96,7 @@ static enum tco_reg_layout tco_reg_layout(struct pci_dev *dev)
 	    sp5100_tco_pci->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
 	    sp5100_tco_pci->revision >= AMD_ZEN_SMBUS_PCI_REV) {
 		return efch_mmio;
-	} else if (dev->vendor == PCI_VENDOR_ID_AMD &&
+	} else if ((dev->vendor == PCI_VENDOR_ID_AMD || dev->vendor == PCI_VENDOR_ID_HYGON) &&
 	    ((dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
 	     dev->revision >= 0x41) ||
 	    (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
@@ -579,6 +579,8 @@ static const struct pci_device_id sp5100_tco_pci_tbl[] = {
 	  PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, PCI_ANY_ID,
 	  PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_HYGON, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, PCI_ANY_ID,
+	  PCI_ANY_ID, },
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl);
-- 
2.39.2

[PATCH AUTOSEL 6.4 21/40] Bluetooth: L2CAP: Fix use-after-free

[Sasha Levin]

From: Zhengping Jiang <jiangzp@google.com>

[ Upstream commit f752a0b334bb95fe9b42ecb511e0864e2768046f ]

Fix potential use-after-free in l2cap_le_command_rej.

Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index c5e8798e297ca..17ca13e8c044c 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -6374,9 +6374,14 @@ static inline int l2cap_le_command_rej(struct l2cap_conn *conn,
 	if (!chan)
 		goto done;
 
+	chan = l2cap_chan_hold_unless_zero(chan);
+	if (!chan)
+		goto done;
+
 	l2cap_chan_lock(chan);
 	l2cap_chan_del(chan, ECONNREFUSED);
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 
 done:
 	mutex_unlock(&conn->chan_lock);
-- 
2.39.2

[PATCH AUTOSEL 6.4 22/40] Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_ready_cb

[Sasha Levin]

From: Sungwoo Kim <iam@sung-woo.kim>

[ Upstream commit 1728137b33c00d5a2b5110ed7aafb42e7c32e4a1 ]

l2cap_sock_release(sk) frees sk. However, sk's children are still alive
and point to the already free'd sk's address.
To fix this, l2cap_sock_release(sk) also cleans sk's children.

==================================================================
BUG: KASAN: use-after-free in l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
Read of size 8 at addr ffff888104617aa8 by task kworker/u3:0/276

CPU: 0 PID: 276 Comm: kworker/u3:0 Not tainted 6.2.0-00001-gef397bd4d5fb-dirty #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci2 hci_rx_work
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x72/0x95 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:306 [inline]
 print_report+0x175/0x478 mm/kasan/report.c:417
 kasan_report+0xb1/0x130 mm/kasan/report.c:517
 l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
 l2cap_chan_ready+0x10e/0x1e0 net/bluetooth/l2cap_core.c:1386
 l2cap_config_req+0x753/0x9f0 net/bluetooth/l2cap_core.c:4480
 l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5739 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:6509 [inline]
 l2cap_recv_frame+0xe2e/0x43c0 net/bluetooth/l2cap_core.c:7788
 l2cap_recv_acldata+0x6ed/0x7e0 net/bluetooth/l2cap_core.c:8506
 hci_acldata_packet net/bluetooth/hci_core.c:3813 [inline]
 hci_rx_work+0x66e/0xbc0 net/bluetooth/hci_core.c:4048
 process_one_work+0x4ea/0x8e0 kernel/workqueue.c:2289
 worker_thread+0x364/0x8e0 kernel/workqueue.c:2436
 kthread+0x1b9/0x200 kernel/kthread.c:376
 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
 </TASK>

Allocated by task 288:
 kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 ____kasan_kmalloc mm/kasan/common.c:374 [inline]
 __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:383
 kasan_kmalloc include/linux/kasan.h:211 [inline]
 __do_kmalloc_node mm/slab_common.c:968 [inline]
 __kmalloc+0x5a/0x140 mm/slab_common.c:981
 kmalloc include/linux/slab.h:584 [inline]
 sk_prot_alloc+0x113/0x1f0 net/core/sock.c:2040
 sk_alloc+0x36/0x3c0 net/core/sock.c:2093
 l2cap_sock_alloc.constprop.0+0x39/0x1c0 net/bluetooth/l2cap_sock.c:1852
 l2cap_sock_create+0x10d/0x220 net/bluetooth/l2cap_sock.c:1898
 bt_sock_create+0x183/0x290 net/bluetooth/af_bluetooth.c:132
 __sock_create+0x226/0x380 net/socket.c:1518
 sock_create net/socket.c:1569 [inline]
 __sys_socket_create net/socket.c:1606 [inline]
 __sys_socket_create net/socket.c:1591 [inline]
 __sys_socket+0x112/0x200 net/socket.c:1639
 __do_sys_socket net/socket.c:1652 [inline]
 __se_sys_socket net/socket.c:1650 [inline]
 __x64_sys_socket+0x40/0x50 net/socket.c:1650
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 288:
 kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 kasan_save_free_info+0x2e/0x50 mm/kasan/generic.c:523
 ____kasan_slab_free mm/kasan/common.c:236 [inline]
 ____kasan_slab_free mm/kasan/common.c:200 [inline]
 __kasan_slab_free+0x10a/0x190 mm/kasan/common.c:244
 kasan_slab_free include/linux/kasan.h:177 [inline]
 slab_free_hook mm/slub.c:1781 [inline]
 slab_free_freelist_hook mm/slub.c:1807 [inline]
 slab_free mm/slub.c:3787 [inline]
 __kmem_cache_free+0x88/0x1f0 mm/slub.c:3800
 sk_prot_free net/core/sock.c:2076 [inline]
 __sk_destruct+0x347/0x430 net/core/sock.c:2168
 sk_destruct+0x9c/0xb0 net/core/sock.c:2183
 __sk_free+0x82/0x220 net/core/sock.c:2194
 sk_free+0x7c/0xa0 net/core/sock.c:2205
 sock_put include/net/sock.h:1991 [inline]
 l2cap_sock_kill+0x256/0x2b0 net/bluetooth/l2cap_sock.c:1257
 l2cap_sock_release+0x1a7/0x220 net/bluetooth/l2cap_sock.c:1428
 __sock_release+0x80/0x150 net/socket.c:650
 sock_close+0x19/0x30 net/socket.c:1368
 __fput+0x17a/0x5c0 fs/file_table.c:320
 task_work_run+0x132/0x1c0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203
 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
 syscall_exit_to_user_mode+0x21/0x50 kernel/entry/common.c:296
 do_syscall_64+0x4c/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

The buggy address belongs to the object at ffff888104617800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 680 bytes inside of
 1024-byte region [ffff888104617800, ffff888104617c00)

The buggy address belongs to the physical page:
page:00000000dbca6a80 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888104614000 pfn:0x104614
head:00000000dbca6a80 order:2 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffff888100041dc0 ffffea0004212c10 ffffea0004234b10
raw: ffff888104614000 0000000000080002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888104617980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888104617a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888104617a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                  ^
 ffff888104617b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888104617b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Ack: This bug is found by FuzzBT with a modified Syzkaller. Other
contributors are Ruoyu Wu and Hui Peng.
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_sock.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index eebe256104bc0..947ca580bb9a2 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -46,6 +46,7 @@ static const struct proto_ops l2cap_sock_ops;
 static void l2cap_sock_init(struct sock *sk, struct sock *parent);
 static struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock,
 				     int proto, gfp_t prio, int kern);
+static void l2cap_sock_cleanup_listen(struct sock *parent);
 
 bool l2cap_is_socket(struct socket *sock)
 {
@@ -1415,6 +1416,7 @@ static int l2cap_sock_release(struct socket *sock)
 	if (!sk)
 		return 0;
 
+	l2cap_sock_cleanup_listen(sk);
 	bt_sock_unlink(&l2cap_sk_list, sk);
 
 	err = l2cap_sock_shutdown(sock, SHUT_RDWR);
-- 
2.39.2

[PATCH AUTOSEL 6.4 23/40] Bluetooth: btusb: Add MT7922 bluetooth ID for the Asus Ally

[Sasha Levin]

From: Matthew Anderson <ruinairas1992@gmail.com>

[ Upstream commit fa01eba11f0e57c767a5eab5291c7a01407a00be ]

Adding the device ID from the Asus Ally gets the bluetooth working
on the device.

Signed-off-by: Matthew Anderson <ruinairas1992@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2a8e2bb038f58..7427da184fe02 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -613,6 +613,9 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe0d9), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0f5), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
 	{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
-- 
2.39.2

[PATCH AUTOSEL 6.4 24/40] ceph: try to dump the msgs when decoding fails

[Sasha Levin]

From: Xiubo Li <xiubli@redhat.com>

[ Upstream commit 8b0da5c549ae63ba1debd92a350f90773cb4bfe7 ]

When the msgs are corrupted we need to dump them and then it will
be easier to dig what has happened and where the issue is.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/mds_client.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 4c0f22acf53d2..66048a86c480c 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -645,6 +645,7 @@ static int parse_reply_info(struct ceph_mds_session *s, struct ceph_msg *msg,
 	err = -EIO;
 out_bad:
 	pr_err("mds parse_reply err %d\n", err);
+	ceph_msg_dump(msg);
 	return err;
 }
 
@@ -3538,6 +3539,7 @@ static void handle_forward(struct ceph_mds_client *mdsc,
 
 bad:
 	pr_err("mdsc_handle_forward decode error err=%d\n", err);
+	ceph_msg_dump(msg);
 }
 
 static int __decode_session_metadata(void **p, void *end,
@@ -5258,6 +5260,7 @@ void ceph_mdsc_handle_fsmap(struct ceph_mds_client *mdsc, struct ceph_msg *msg)
 bad:
 	pr_err("error decoding fsmap %d. Shutting down mount.\n", err);
 	ceph_umount_begin(mdsc->fsc->sb);
+	ceph_msg_dump(msg);
 err_out:
 	mutex_lock(&mdsc->mutex);
 	mdsc->mdsmap_err = err;
@@ -5326,6 +5329,7 @@ void ceph_mdsc_handle_mdsmap(struct ceph_mds_client *mdsc, struct ceph_msg *msg)
 bad:
 	pr_err("error decoding mdsmap %d. Shutting down mount.\n", err);
 	ceph_umount_begin(mdsc->fsc->sb);
+	ceph_msg_dump(msg);
 	return;
 }
 
-- 
2.39.2

[PATCH AUTOSEL 6.4 25/40] drm/amdgpu: Fix potential fence use-after-free v2

[Sasha Levin]

From: shanzhulig <shanzhulig@gmail.com>

[ Upstream commit 2e54154b9f27262efd0cb4f903cc7d5ad1fe9628 ]

fence Decrements the reference count before exiting.
Avoid Race Vulnerabilities for fence use-after-free.

v2 (chk): actually fix the use after free and not just move it.

Signed-off-by: shanzhulig <shanzhulig@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
index 2eb2c66843a88..71a9c4ab905f6 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
@@ -1624,15 +1624,15 @@ static int amdgpu_cs_wait_all_fences(struct amdgpu_device *adev,
 			continue;
 
 		r = dma_fence_wait_timeout(fence, true, timeout);
+		if (r > 0 && fence->error)
+			r = fence->error;
+
 		dma_fence_put(fence);
 		if (r < 0)
 			return r;
 
 		if (r == 0)
 			break;
-
-		if (fence->error)
-			return fence->error;
 	}
 
 	memset(wait, 0, sizeof(*wait));
-- 
2.39.2

[PATCH AUTOSEL 6.4 25/40] drm/amdgpu: Fix potential fence use-after-free v2

[Sasha Levin]

From: shanzhulig <shanzhulig@gmail.com>

[ Upstream commit 2e54154b9f27262efd0cb4f903cc7d5ad1fe9628 ]

fence Decrements the reference count before exiting.
Avoid Race Vulnerabilities for fence use-after-free.

v2 (chk): actually fix the use after free and not just move it.

Signed-off-by: shanzhulig <shanzhulig@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
index 2eb2c66843a88..71a9c4ab905f6 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
@@ -1624,15 +1624,15 @@ static int amdgpu_cs_wait_all_fences(struct amdgpu_device *adev,
 			continue;
 
 		r = dma_fence_wait_timeout(fence, true, timeout);
+		if (r > 0 && fence->error)
+			r = fence->error;
+
 		dma_fence_put(fence);
 		if (r < 0)
 			return r;
 
 		if (r == 0)
 			break;
-
-		if (fence->error)
-			return fence->error;
 	}
 
 	memset(wait, 0, sizeof(*wait));
-- 
2.39.2

[f2fs-dev] [PATCH AUTOSEL 6.4 26/40] f2fs: fix to do sanity check on direct node in truncate_dnode()

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit a6ec83786ab9f13f25fb18166dee908845713a95 ]

syzbot reports below bug:

BUG: KASAN: slab-use-after-free in f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
Read of size 4 at addr ffff88802a25c000 by task syz-executor148/5000

CPU: 1 PID: 5000 Comm: syz-executor148 Not tainted 6.4.0-rc7-syzkaller-00041-ge660abd551f1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
 print_report mm/kasan/report.c:462 [inline]
 kasan_report+0x11c/0x130 mm/kasan/report.c:572
 f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
 truncate_dnode+0x229/0x2e0 fs/f2fs/node.c:944
 f2fs_truncate_inode_blocks+0x64b/0xde0 fs/f2fs/node.c:1154
 f2fs_do_truncate_blocks+0x4ac/0xf30 fs/f2fs/file.c:721
 f2fs_truncate_blocks+0x7b/0x300 fs/f2fs/file.c:749
 f2fs_truncate.part.0+0x4a5/0x630 fs/f2fs/file.c:799
 f2fs_truncate include/linux/fs.h:825 [inline]
 f2fs_setattr+0x1738/0x2090 fs/f2fs/file.c:1006
 notify_change+0xb2c/0x1180 fs/attr.c:483
 do_truncate+0x143/0x200 fs/open.c:66
 handle_truncate fs/namei.c:3295 [inline]
 do_open fs/namei.c:3640 [inline]
 path_openat+0x2083/0x2750 fs/namei.c:3791
 do_filp_open+0x1ba/0x410 fs/namei.c:3818
 do_sys_openat2+0x16d/0x4c0 fs/open.c:1356
 do_sys_open fs/open.c:1372 [inline]
 __do_sys_creat fs/open.c:1448 [inline]
 __se_sys_creat fs/open.c:1442 [inline]
 __x64_sys_creat+0xcd/0x120 fs/open.c:1442
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is, inodeA references inodeB via inodeB's ino, once inodeA
is truncated, it calls truncate_dnode() to truncate data blocks in inodeB's
node page, it traverse mapping data from node->i.i_addr[0] to
node->i.i_addr[ADDRS_PER_BLOCK() - 1], result in out-of-boundary access.

This patch fixes to add sanity check on dnode page in truncate_dnode(),
so that, it can help to avoid triggering such issue, and once it encounters
such issue, it will record newly introduced ERROR_INVALID_NODE_REFERENCE
error into superblock, later fsck can detect such issue and try repairing.

Also, it removes f2fs_truncate_data_blocks() for cleanup due to the
function has only one caller, and uses f2fs_truncate_data_blocks_range()
instead.

Reported-and-tested-by: syzbot+12cb4425b22169b52036@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000f3038a05fef867f8@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/f2fs.h          |  1 -
 fs/f2fs/file.c          |  5 -----
 fs/f2fs/node.c          | 14 ++++++++++++--
 include/linux/f2fs_fs.h |  1 +
 4 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index d211ee89c1586..91a090ff13a94 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3432,7 +3432,6 @@ static inline bool __is_valid_data_blkaddr(block_t blkaddr)
  * file.c
  */
 int f2fs_sync_file(struct file *file, loff_t start, loff_t end, int datasync);
-void f2fs_truncate_data_blocks(struct dnode_of_data *dn);
 int f2fs_do_truncate_blocks(struct inode *inode, u64 from, bool lock);
 int f2fs_truncate_blocks(struct inode *inode, u64 from, bool lock);
 int f2fs_truncate(struct inode *inode);
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 5ac53d2627d20..97d8917c5c9a5 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -627,11 +627,6 @@ void f2fs_truncate_data_blocks_range(struct dnode_of_data *dn, int count)
 					 dn->ofs_in_node, nr_free);
 }
 
-void f2fs_truncate_data_blocks(struct dnode_of_data *dn)
-{
-	f2fs_truncate_data_blocks_range(dn, ADDRS_PER_BLOCK(dn->inode));
-}
-
 static int truncate_partial_data_page(struct inode *inode, u64 from,
 								bool cache_only)
 {
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index bd1dad5237967..2b34bfa7e0183 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -925,6 +925,7 @@ static int truncate_node(struct dnode_of_data *dn)
 
 static int truncate_dnode(struct dnode_of_data *dn)
 {
+	struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
 	struct page *page;
 	int err;
 
@@ -932,16 +933,25 @@ static int truncate_dnode(struct dnode_of_data *dn)
 		return 1;
 
 	/* get direct node */
-	page = f2fs_get_node_page(F2FS_I_SB(dn->inode), dn->nid);
+	page = f2fs_get_node_page(sbi, dn->nid);
 	if (PTR_ERR(page) == -ENOENT)
 		return 1;
 	else if (IS_ERR(page))
 		return PTR_ERR(page);
 
+	if (IS_INODE(page) || ino_of_node(page) != dn->inode->i_ino) {
+		f2fs_err(sbi, "incorrect node reference, ino: %lu, nid: %u, ino_of_node: %u",
+				dn->inode->i_ino, dn->nid, ino_of_node(page));
+		set_sbi_flag(sbi, SBI_NEED_FSCK);
+		f2fs_handle_error(sbi, ERROR_INVALID_NODE_REFERENCE);
+		f2fs_put_page(page, 1);
+		return -EFSCORRUPTED;
+	}
+
 	/* Make dnode_of_data for parameter */
 	dn->node_page = page;
 	dn->ofs_in_node = 0;
-	f2fs_truncate_data_blocks(dn);
+	f2fs_truncate_data_blocks_range(dn, ADDRS_PER_BLOCK(dn->inode));
 	err = truncate_node(dn);
 	if (err)
 		return err;
diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h
index 1d6402529d10c..a82a4bb6ce68b 100644
--- a/include/linux/f2fs_fs.h
+++ b/include/linux/f2fs_fs.h
@@ -103,6 +103,7 @@ enum f2fs_error {
 	ERROR_INCONSISTENT_SIT,
 	ERROR_CORRUPTED_VERITY_XATTR,
 	ERROR_CORRUPTED_XATTR,
+	ERROR_INVALID_NODE_REFERENCE,
 	ERROR_MAX,
 };
 
-- 
2.39.2



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[PATCH AUTOSEL 6.4 26/40] f2fs: fix to do sanity check on direct node in truncate_dnode()

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit a6ec83786ab9f13f25fb18166dee908845713a95 ]

syzbot reports below bug:

BUG: KASAN: slab-use-after-free in f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
Read of size 4 at addr ffff88802a25c000 by task syz-executor148/5000

CPU: 1 PID: 5000 Comm: syz-executor148 Not tainted 6.4.0-rc7-syzkaller-00041-ge660abd551f1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
 print_report mm/kasan/report.c:462 [inline]
 kasan_report+0x11c/0x130 mm/kasan/report.c:572
 f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
 truncate_dnode+0x229/0x2e0 fs/f2fs/node.c:944
 f2fs_truncate_inode_blocks+0x64b/0xde0 fs/f2fs/node.c:1154
 f2fs_do_truncate_blocks+0x4ac/0xf30 fs/f2fs/file.c:721
 f2fs_truncate_blocks+0x7b/0x300 fs/f2fs/file.c:749
 f2fs_truncate.part.0+0x4a5/0x630 fs/f2fs/file.c:799
 f2fs_truncate include/linux/fs.h:825 [inline]
 f2fs_setattr+0x1738/0x2090 fs/f2fs/file.c:1006
 notify_change+0xb2c/0x1180 fs/attr.c:483
 do_truncate+0x143/0x200 fs/open.c:66
 handle_truncate fs/namei.c:3295 [inline]
 do_open fs/namei.c:3640 [inline]
 path_openat+0x2083/0x2750 fs/namei.c:3791
 do_filp_open+0x1ba/0x410 fs/namei.c:3818
 do_sys_openat2+0x16d/0x4c0 fs/open.c:1356
 do_sys_open fs/open.c:1372 [inline]
 __do_sys_creat fs/open.c:1448 [inline]
 __se_sys_creat fs/open.c:1442 [inline]
 __x64_sys_creat+0xcd/0x120 fs/open.c:1442
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is, inodeA references inodeB via inodeB's ino, once inodeA
is truncated, it calls truncate_dnode() to truncate data blocks in inodeB's
node page, it traverse mapping data from node->i.i_addr[0] to
node->i.i_addr[ADDRS_PER_BLOCK() - 1], result in out-of-boundary access.

This patch fixes to add sanity check on dnode page in truncate_dnode(),
so that, it can help to avoid triggering such issue, and once it encounters
such issue, it will record newly introduced ERROR_INVALID_NODE_REFERENCE
error into superblock, later fsck can detect such issue and try repairing.

Also, it removes f2fs_truncate_data_blocks() for cleanup due to the
function has only one caller, and uses f2fs_truncate_data_blocks_range()
instead.

Reported-and-tested-by: syzbot+12cb4425b22169b52036@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000f3038a05fef867f8@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/f2fs.h          |  1 -
 fs/f2fs/file.c          |  5 -----
 fs/f2fs/node.c          | 14 ++++++++++++--
 include/linux/f2fs_fs.h |  1 +
 4 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index d211ee89c1586..91a090ff13a94 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3432,7 +3432,6 @@ static inline bool __is_valid_data_blkaddr(block_t blkaddr)
  * file.c
  */
 int f2fs_sync_file(struct file *file, loff_t start, loff_t end, int datasync);
-void f2fs_truncate_data_blocks(struct dnode_of_data *dn);
 int f2fs_do_truncate_blocks(struct inode *inode, u64 from, bool lock);
 int f2fs_truncate_blocks(struct inode *inode, u64 from, bool lock);
 int f2fs_truncate(struct inode *inode);
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 5ac53d2627d20..97d8917c5c9a5 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -627,11 +627,6 @@ void f2fs_truncate_data_blocks_range(struct dnode_of_data *dn, int count)
 					 dn->ofs_in_node, nr_free);
 }
 
-void f2fs_truncate_data_blocks(struct dnode_of_data *dn)
-{
-	f2fs_truncate_data_blocks_range(dn, ADDRS_PER_BLOCK(dn->inode));
-}
-
 static int truncate_partial_data_page(struct inode *inode, u64 from,
 								bool cache_only)
 {
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index bd1dad5237967..2b34bfa7e0183 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -925,6 +925,7 @@ static int truncate_node(struct dnode_of_data *dn)
 
 static int truncate_dnode(struct dnode_of_data *dn)
 {
+	struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
 	struct page *page;
 	int err;
 
@@ -932,16 +933,25 @@ static int truncate_dnode(struct dnode_of_data *dn)
 		return 1;
 
 	/* get direct node */
-	page = f2fs_get_node_page(F2FS_I_SB(dn->inode), dn->nid);
+	page = f2fs_get_node_page(sbi, dn->nid);
 	if (PTR_ERR(page) == -ENOENT)
 		return 1;
 	else if (IS_ERR(page))
 		return PTR_ERR(page);
 
+	if (IS_INODE(page) || ino_of_node(page) != dn->inode->i_ino) {
+		f2fs_err(sbi, "incorrect node reference, ino: %lu, nid: %u, ino_of_node: %u",
+				dn->inode->i_ino, dn->nid, ino_of_node(page));
+		set_sbi_flag(sbi, SBI_NEED_FSCK);
+		f2fs_handle_error(sbi, ERROR_INVALID_NODE_REFERENCE);
+		f2fs_put_page(page, 1);
+		return -EFSCORRUPTED;
+	}
+
 	/* Make dnode_of_data for parameter */
 	dn->node_page = page;
 	dn->ofs_in_node = 0;
-	f2fs_truncate_data_blocks(dn);
+	f2fs_truncate_data_blocks_range(dn, ADDRS_PER_BLOCK(dn->inode));
 	err = truncate_node(dn);
 	if (err)
 		return err;
diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h
index 1d6402529d10c..a82a4bb6ce68b 100644
--- a/include/linux/f2fs_fs.h
+++ b/include/linux/f2fs_fs.h
@@ -103,6 +103,7 @@ enum f2fs_error {
 	ERROR_INCONSISTENT_SIT,
 	ERROR_CORRUPTED_VERITY_XATTR,
 	ERROR_CORRUPTED_XATTR,
+	ERROR_INVALID_NODE_REFERENCE,
 	ERROR_MAX,
 };
 
-- 
2.39.2

[PATCH AUTOSEL 6.4 27/40] fs/ntfs3: Enhance sanity check while generating attr_list

[Sasha Levin]

From: Edward Lo <loyuantsung@gmail.com>

[ Upstream commit fdec309c7672cbee4dc0229ee4cbb33c948a1bdd ]

ni_create_attr_list uses WARN_ON to catch error cases while generating
attribute list, which only prints out stack trace and may not be enough.
This repalces them with more proper error handling flow.

[   59.666332] BUG: kernel NULL pointer dereference, address: 000000000000000e
[   59.673268] #PF: supervisor read access in kernel mode
[   59.678354] #PF: error_code(0x0000) - not-present page
[   59.682831] PGD 8000000005ff1067 P4D 8000000005ff1067 PUD 7dee067 PMD 0
[   59.688556] Oops: 0000 [#1] PREEMPT SMP KASAN PTI
[   59.692642] CPU: 0 PID: 198 Comm: poc Tainted: G    B   W          6.2.0-rc1+ #4
[   59.698868] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[   59.708795] RIP: 0010:ni_create_attr_list+0x505/0x860
[   59.713657] Code: 7e 10 e8 5e d0 d0 ff 45 0f b7 76 10 48 8d 7b 16 e8 00 d1 d0 ff 66 44 89 73 16 4d 8d 75 0e 4c 89 f7 e8 3f d0 d0 ff 4c 8d8
[   59.731559] RSP: 0018:ffff88800a56f1e0 EFLAGS: 00010282
[   59.735691] RAX: 0000000000000001 RBX: ffff88800b7b5088 RCX: ffffffffb83079fe
[   59.741792] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffffbb7f9fc0
[   59.748423] RBP: ffff88800a56f3a8 R08: ffff88800b7b50a0 R09: fffffbfff76ff3f9
[   59.754654] R10: ffffffffbb7f9fc7 R11: fffffbfff76ff3f8 R12: ffff88800b756180
[   59.761552] R13: 0000000000000000 R14: 000000000000000e R15: 0000000000000050
[   59.768323] FS:  00007feaa8c96440(0000) GS:ffff88806d400000(0000) knlGS:0000000000000000
[   59.776027] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   59.781395] CR2: 00007f3a2e0b1000 CR3: 000000000a5bc000 CR4: 00000000000006f0
[   59.787607] Call Trace:
[   59.790271]  <TASK>
[   59.792488]  ? __pfx_ni_create_attr_list+0x10/0x10
[   59.797235]  ? kernel_text_address+0xd3/0xe0
[   59.800856]  ? unwind_get_return_address+0x3e/0x60
[   59.805101]  ? __kasan_check_write+0x18/0x20
[   59.809296]  ? preempt_count_sub+0x1c/0xd0
[   59.813421]  ni_ins_attr_ext+0x52c/0x5c0
[   59.817034]  ? __pfx_ni_ins_attr_ext+0x10/0x10
[   59.821926]  ? __vfs_setxattr+0x121/0x170
[   59.825718]  ? __vfs_setxattr_noperm+0x97/0x300
[   59.829562]  ? __vfs_setxattr_locked+0x145/0x170
[   59.833987]  ? vfs_setxattr+0x137/0x2a0
[   59.836732]  ? do_setxattr+0xce/0x150
[   59.839807]  ? setxattr+0x126/0x140
[   59.842353]  ? path_setxattr+0x164/0x180
[   59.845275]  ? __x64_sys_setxattr+0x71/0x90
[   59.848838]  ? do_syscall_64+0x3f/0x90
[   59.851898]  ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[   59.857046]  ? stack_depot_save+0x17/0x20
[   59.860299]  ni_insert_attr+0x1ba/0x420
[   59.863104]  ? __pfx_ni_insert_attr+0x10/0x10
[   59.867069]  ? preempt_count_sub+0x1c/0xd0
[   59.869897]  ? _raw_spin_unlock_irqrestore+0x2b/0x50
[   59.874088]  ? __create_object+0x3ae/0x5d0
[   59.877865]  ni_insert_resident+0xc4/0x1c0
[   59.881430]  ? __pfx_ni_insert_resident+0x10/0x10
[   59.886355]  ? kasan_save_alloc_info+0x1f/0x30
[   59.891117]  ? __kasan_kmalloc+0x8b/0xa0
[   59.894383]  ntfs_set_ea+0x90d/0xbf0
[   59.897703]  ? __pfx_ntfs_set_ea+0x10/0x10
[   59.901011]  ? kernel_text_address+0xd3/0xe0
[   59.905308]  ? __kernel_text_address+0x16/0x50
[   59.909811]  ? unwind_get_return_address+0x3e/0x60
[   59.914898]  ? __pfx_stack_trace_consume_entry+0x10/0x10
[   59.920250]  ? arch_stack_walk+0xa2/0x100
[   59.924560]  ? filter_irq_stacks+0x27/0x80
[   59.928722]  ntfs_setxattr+0x405/0x440
[   59.932512]  ? __pfx_ntfs_setxattr+0x10/0x10
[   59.936634]  ? kvmalloc_node+0x2d/0x120
[   59.940378]  ? kasan_save_stack+0x41/0x60
[   59.943870]  ? kasan_save_stack+0x2a/0x60
[   59.947719]  ? kasan_set_track+0x29/0x40
[   59.951417]  ? kasan_save_alloc_info+0x1f/0x30
[   59.955733]  ? __kasan_kmalloc+0x8b/0xa0
[   59.959598]  ? __kmalloc_node+0x68/0x150
[   59.963163]  ? kvmalloc_node+0x2d/0x120
[   59.966490]  ? vmemdup_user+0x2b/0xa0
[   59.969060]  __vfs_setxattr+0x121/0x170
[   59.972456]  ? __pfx___vfs_setxattr+0x10/0x10
[   59.976008]  __vfs_setxattr_noperm+0x97/0x300
[   59.981562]  __vfs_setxattr_locked+0x145/0x170
[   59.986100]  vfs_setxattr+0x137/0x2a0
[   59.989964]  ? __pfx_vfs_setxattr+0x10/0x10
[   59.993616]  ? __kasan_check_write+0x18/0x20
[   59.997425]  do_setxattr+0xce/0x150
[   60.000304]  setxattr+0x126/0x140
[   60.002967]  ? __pfx_setxattr+0x10/0x10
[   60.006471]  ? __virt_addr_valid+0xcb/0x140
[   60.010461]  ? __call_rcu_common.constprop.0+0x1c7/0x330
[   60.016037]  ? debug_smp_processor_id+0x1b/0x30
[   60.021008]  ? kasan_quarantine_put+0x5b/0x190
[   60.025545]  ? putname+0x84/0xa0
[   60.027910]  ? __kasan_slab_free+0x11e/0x1b0
[   60.031483]  ? putname+0x84/0xa0
[   60.033986]  ? preempt_count_sub+0x1c/0xd0
[   60.036876]  ? __mnt_want_write+0xae/0x100
[   60.040738]  ? mnt_want_write+0x8f/0x150
[   60.044317]  path_setxattr+0x164/0x180
[   60.048096]  ? __pfx_path_setxattr+0x10/0x10
[   60.052096]  ? strncpy_from_user+0x175/0x1c0
[   60.056482]  ? debug_smp_processor_id+0x1b/0x30
[   60.059848]  ? fpregs_assert_state_consistent+0x6b/0x80
[   60.064557]  __x64_sys_setxattr+0x71/0x90
[   60.068892]  do_syscall_64+0x3f/0x90
[   60.072868]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[   60.077523] RIP: 0033:0x7feaa86e4469
[   60.080915] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088
[   60.097353] RSP: 002b:00007ffdbd8311e8 EFLAGS: 00000286 ORIG_RAX: 00000000000000bc
[   60.103386] RAX: ffffffffffffffda RBX: 9461c5e290baac00 RCX: 00007feaa86e4469
[   60.110322] RDX: 00007ffdbd831fe0 RSI: 00007ffdbd831305 RDI: 00007ffdbd831263
[   60.116808] RBP: 00007ffdbd836180 R08: 0000000000000001 R09: 00007ffdbd836268
[   60.123879] R10: 000000000000007d R11: 0000000000000286 R12: 0000000000400500
[   60.130540] R13: 00007ffdbd836260 R14: 0000000000000000 R15: 0000000000000000
[   60.136553]  </TASK>
[   60.138818] Modules linked in:
[   60.141839] CR2: 000000000000000e
[   60.144831] ---[ end trace 0000000000000000 ]---
[   60.149058] RIP: 0010:ni_create_attr_list+0x505/0x860
[   60.153975] Code: 7e 10 e8 5e d0 d0 ff 45 0f b7 76 10 48 8d 7b 16 e8 00 d1 d0 ff 66 44 89 73 16 4d 8d 75 0e 4c 89 f7 e8 3f d0 d0 ff 4c 8d8
[   60.172443] RSP: 0018:ffff88800a56f1e0 EFLAGS: 00010282
[   60.176246] RAX: 0000000000000001 RBX: ffff88800b7b5088 RCX: ffffffffb83079fe
[   60.182752] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffffbb7f9fc0
[   60.189949] RBP: ffff88800a56f3a8 R08: ffff88800b7b50a0 R09: fffffbfff76ff3f9
[   60.196950] R10: ffffffffbb7f9fc7 R11: fffffbfff76ff3f8 R12: ffff88800b756180
[   60.203671] R13: 0000000000000000 R14: 000000000000000e R15: 0000000000000050
[   60.209595] FS:  00007feaa8c96440(0000) GS:ffff88806d400000(0000) knlGS:0000000000000000
[   60.216299] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   60.222276] CR2: 00007f3a2e0b1000 CR3: 000000000a5bc000 CR4: 00000000000006f0

Signed-off-by: Edward Lo <loyuantsung@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/frecord.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c
index 2bfcf1a989c95..50214b77c6a35 100644
--- a/fs/ntfs3/frecord.c
+++ b/fs/ntfs3/frecord.c
@@ -874,6 +874,7 @@ int ni_create_attr_list(struct ntfs_inode *ni)
 	if (err)
 		goto out1;
 
+	err = -EINVAL;
 	/* Call mi_remove_attr() in reverse order to keep pointers 'arr_move' valid. */
 	while (to_free > 0) {
 		struct ATTRIB *b = arr_move[--nb];
@@ -882,7 +883,8 @@ int ni_create_attr_list(struct ntfs_inode *ni)
 
 		attr = mi_insert_attr(mi, b->type, Add2Ptr(b, name_off),
 				      b->name_len, asize, name_off);
-		WARN_ON(!attr);
+		if (!attr)
+			goto out1;
 
 		mi_get_ref(mi, &le_b[nb]->ref);
 		le_b[nb]->id = attr->id;
@@ -892,17 +894,20 @@ int ni_create_attr_list(struct ntfs_inode *ni)
 		attr->id = le_b[nb]->id;
 
 		/* Remove from primary record. */
-		WARN_ON(!mi_remove_attr(NULL, &ni->mi, b));
+		if (!mi_remove_attr(NULL, &ni->mi, b))
+			goto out1;
 
 		if (to_free <= asize)
 			break;
 		to_free -= asize;
-		WARN_ON(!nb);
+		if (!nb)
+			goto out1;
 	}
 
 	attr = mi_insert_attr(&ni->mi, ATTR_LIST, NULL, 0,
 			      lsize + SIZEOF_RESIDENT, SIZEOF_RESIDENT);
-	WARN_ON(!attr);
+	if (!attr)
+		goto out1;
 
 	attr->non_res = 0;
 	attr->flags = 0;
@@ -922,9 +927,10 @@ int ni_create_attr_list(struct ntfs_inode *ni)
 	kfree(ni->attr_list.le);
 	ni->attr_list.le = NULL;
 	ni->attr_list.size = 0;
+	return err;
 
 out:
-	return err;
+	return 0;
 }
 
 /*
-- 
2.39.2

[PATCH AUTOSEL 6.4 28/40] fs/ntfs3: Return error for inconsistent extended attributes

[Sasha Levin]

From: Edward Lo <loyuantsung@gmail.com>

[ Upstream commit c9db0ff04649aa0b45f497183c957fe260f229f6 ]

ntfs_read_ea is called when we want to read extended attributes. There
are some sanity checks for the validity of the EAs. However, it fails to
return a proper error code for the inconsistent attributes, which might
lead to unpredicted memory accesses after return.

[  138.916927] BUG: KASAN: use-after-free in ntfs_set_ea+0x453/0xbf0
[  138.923876] Write of size 4 at addr ffff88800205cfac by task poc/199
[  138.931132]
[  138.933016] CPU: 0 PID: 199 Comm: poc Not tainted 6.2.0-rc1+ #4
[  138.938070] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[  138.947327] Call Trace:
[  138.949557]  <TASK>
[  138.951539]  dump_stack_lvl+0x4d/0x67
[  138.956834]  print_report+0x16f/0x4a6
[  138.960798]  ? ntfs_set_ea+0x453/0xbf0
[  138.964437]  ? kasan_complete_mode_report_info+0x7d/0x200
[  138.969793]  ? ntfs_set_ea+0x453/0xbf0
[  138.973523]  kasan_report+0xb8/0x140
[  138.976740]  ? ntfs_set_ea+0x453/0xbf0
[  138.980578]  __asan_store4+0x76/0xa0
[  138.984669]  ntfs_set_ea+0x453/0xbf0
[  138.988115]  ? __pfx_ntfs_set_ea+0x10/0x10
[  138.993390]  ? kernel_text_address+0xd3/0xe0
[  138.998270]  ? __kernel_text_address+0x16/0x50
[  139.002121]  ? unwind_get_return_address+0x3e/0x60
[  139.005659]  ? __pfx_stack_trace_consume_entry+0x10/0x10
[  139.010177]  ? arch_stack_walk+0xa2/0x100
[  139.013657]  ? filter_irq_stacks+0x27/0x80
[  139.017018]  ntfs_setxattr+0x405/0x440
[  139.022151]  ? __pfx_ntfs_setxattr+0x10/0x10
[  139.026569]  ? kvmalloc_node+0x2d/0x120
[  139.030329]  ? kasan_save_stack+0x41/0x60
[  139.033883]  ? kasan_save_stack+0x2a/0x60
[  139.037338]  ? kasan_set_track+0x29/0x40
[  139.040163]  ? kasan_save_alloc_info+0x1f/0x30
[  139.043588]  ? __kasan_kmalloc+0x8b/0xa0
[  139.047255]  ? __kmalloc_node+0x68/0x150
[  139.051264]  ? kvmalloc_node+0x2d/0x120
[  139.055301]  ? vmemdup_user+0x2b/0xa0
[  139.058584]  __vfs_setxattr+0x121/0x170
[  139.062617]  ? __pfx___vfs_setxattr+0x10/0x10
[  139.066282]  __vfs_setxattr_noperm+0x97/0x300
[  139.070061]  __vfs_setxattr_locked+0x145/0x170
[  139.073580]  vfs_setxattr+0x137/0x2a0
[  139.076641]  ? __pfx_vfs_setxattr+0x10/0x10
[  139.080223]  ? __kasan_check_write+0x18/0x20
[  139.084234]  do_setxattr+0xce/0x150
[  139.087768]  setxattr+0x126/0x140
[  139.091250]  ? __pfx_setxattr+0x10/0x10
[  139.094948]  ? __virt_addr_valid+0xcb/0x140
[  139.097838]  ? __call_rcu_common.constprop.0+0x1c7/0x330
[  139.102688]  ? debug_smp_processor_id+0x1b/0x30
[  139.105985]  ? kasan_quarantine_put+0x5b/0x190
[  139.109980]  ? putname+0x84/0xa0
[  139.113886]  ? __kasan_slab_free+0x11e/0x1b0
[  139.117961]  ? putname+0x84/0xa0
[  139.121316]  ? preempt_count_sub+0x1c/0xd0
[  139.124427]  ? __mnt_want_write+0xae/0x100
[  139.127836]  ? mnt_want_write+0x8f/0x150
[  139.130954]  path_setxattr+0x164/0x180
[  139.133998]  ? __pfx_path_setxattr+0x10/0x10
[  139.137853]  ? __pfx_ksys_pwrite64+0x10/0x10
[  139.141299]  ? debug_smp_processor_id+0x1b/0x30
[  139.145714]  ? fpregs_assert_state_consistent+0x6b/0x80
[  139.150796]  __x64_sys_setxattr+0x71/0x90
[  139.155407]  do_syscall_64+0x3f/0x90
[  139.159035]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[  139.163843] RIP: 0033:0x7f108cae4469
[  139.166481] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088
[  139.183764] RSP: 002b:00007fff87588388 EFLAGS: 00000286 ORIG_RAX: 00000000000000bc
[  139.190657] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f108cae4469
[  139.196586] RDX: 00007fff875883b0 RSI: 00007fff875883d1 RDI: 00007fff875883b6
[  139.201716] RBP: 00007fff8758c530 R08: 0000000000000001 R09: 00007fff8758c618
[  139.207940] R10: 0000000000000006 R11: 0000000000000286 R12: 00000000004004c0
[  139.214007] R13: 00007fff8758c610 R14: 0000000000000000 R15: 0000000000000000

Signed-off-by: Edward Lo <loyuantsung@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/xattr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c
index c3de60a4543fa..c78d83f306689 100644
--- a/fs/ntfs3/xattr.c
+++ b/fs/ntfs3/xattr.c
@@ -141,6 +141,7 @@ static int ntfs_read_ea(struct ntfs_inode *ni, struct EA_FULL **ea,
 
 	memset(Add2Ptr(ea_p, size), 0, add_bytes);
 
+	err = -EINVAL;
 	/* Check all attributes for consistency. */
 	for (off = 0; off < size; off += ea_size) {
 		const struct EA_FULL *ef = Add2Ptr(ea_p, off);
-- 
2.39.2

[PATCH AUTOSEL 6.4 29/40] fs: ntfs3: Fix possible null-pointer dereferences in mi_read()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju@buaa.edu.cn>

[ Upstream commit 97498cd610c0d030a7bd49a7efad974790661162 ]

In a previous commit 2681631c2973 ("fs/ntfs3: Add null pointer check to
attr_load_runs_vcn"), ni can be NULL in attr_load_runs_vcn(), and thus it
should be checked before being used.

However, in the call stack of this commit, mft_ni in mi_read() is
aliased with ni in attr_load_runs_vcn(), and it is also used in
mi_read() at two places:

mi_read()
  rw_lock = &mft_ni->file.run_lock -> No check
  attr_load_runs_vcn(mft_ni, ...)
    ni (namely mft_ni) is checked in the previous commit
  attr_load_runs_vcn(..., &mft_ni->file.run) -> No check

Thus, to avoid possible null-pointer dereferences, the related checks
should be added.

These bugs are reported by a static analysis tool implemented by myself,
and they are found by extending a known bug fixed in the previous commit.
Thus, they could be theoretical bugs.

Signed-off-by: Jia-Ju Bai <baijiaju@buaa.edu.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/record.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ntfs3/record.c b/fs/ntfs3/record.c
index 2a281cead2bcc..7060f784c2d72 100644
--- a/fs/ntfs3/record.c
+++ b/fs/ntfs3/record.c
@@ -124,7 +124,7 @@ int mi_read(struct mft_inode *mi, bool is_mft)
 	struct rw_semaphore *rw_lock = NULL;
 
 	if (is_mounted(sbi)) {
-		if (!is_mft) {
+		if (!is_mft && mft_ni) {
 			rw_lock = &mft_ni->file.run_lock;
 			down_read(rw_lock);
 		}
@@ -148,7 +148,7 @@ int mi_read(struct mft_inode *mi, bool is_mft)
 		ni_lock(mft_ni);
 		down_write(rw_lock);
 	}
-	err = attr_load_runs_vcn(mft_ni, ATTR_DATA, NULL, 0, &mft_ni->file.run,
+	err = attr_load_runs_vcn(mft_ni, ATTR_DATA, NULL, 0, run,
 				 vbo >> sbi->cluster_bits);
 	if (rw_lock) {
 		up_write(rw_lock);
-- 
2.39.2

[PATCH AUTOSEL 6.4 30/40] fs/ntfs3: Use __GFP_NOWARN allocation at ntfs_load_attr_list()

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit ea303f72d70ce2f0b0aa94ab127085289768c5a6 ]

syzbot is reporting too large allocation at ntfs_load_attr_list(), for
a crafted filesystem can have huge data_size.

Reported-by: syzbot <syzbot+89dbb3a789a5b9711793@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=89dbb3a789a5b9711793
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/attrlist.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ntfs3/attrlist.c b/fs/ntfs3/attrlist.c
index c0c6bcbc8c05c..81c22df27c725 100644
--- a/fs/ntfs3/attrlist.c
+++ b/fs/ntfs3/attrlist.c
@@ -52,7 +52,7 @@ int ntfs_load_attr_list(struct ntfs_inode *ni, struct ATTRIB *attr)
 
 	if (!attr->non_res) {
 		lsize = le32_to_cpu(attr->res.data_size);
-		le = kmalloc(al_aligned(lsize), GFP_NOFS);
+		le = kmalloc(al_aligned(lsize), GFP_NOFS | __GFP_NOWARN);
 		if (!le) {
 			err = -ENOMEM;
 			goto out;
@@ -80,7 +80,7 @@ int ntfs_load_attr_list(struct ntfs_inode *ni, struct ATTRIB *attr)
 		if (err < 0)
 			goto out;
 
-		le = kmalloc(al_aligned(lsize), GFP_NOFS);
+		le = kmalloc(al_aligned(lsize), GFP_NOFS | __GFP_NOWARN);
 		if (!le) {
 			err = -ENOMEM;
 			goto out;
-- 
2.39.2

[PATCH AUTOSEL 6.4 31/40] fs/ntfs3: Mark ntfs dirty when on-disk struct is corrupted

[Sasha Levin]

From: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

[ Upstream commit e0f363a98830e8d7d70fbaf91c07ae0b7c57aafe ]

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/fsntfs.c  | 2 +-
 fs/ntfs3/index.c   | 6 ++++++
 fs/ntfs3/ntfs_fs.h | 2 ++
 fs/ntfs3/record.c  | 6 ++++++
 4 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c
index 28cc421102e59..21567e58265c4 100644
--- a/fs/ntfs3/fsntfs.c
+++ b/fs/ntfs3/fsntfs.c
@@ -178,7 +178,7 @@ int ntfs_fix_post_read(struct NTFS_RECORD_HEADER *rhdr, size_t bytes,
 	/* Check errors. */
 	if ((fo & 1) || fo + fn * sizeof(short) > SECTOR_SIZE || !fn-- ||
 	    fn * SECTOR_SIZE > bytes) {
-		return -EINVAL; /* Native chkntfs returns ok! */
+		return -E_NTFS_CORRUPT;
 	}
 
 	/* Get fixup pointer. */
diff --git a/fs/ntfs3/index.c b/fs/ntfs3/index.c
index 0a48d2d672198..b40da258e6848 100644
--- a/fs/ntfs3/index.c
+++ b/fs/ntfs3/index.c
@@ -1113,6 +1113,12 @@ int indx_read(struct ntfs_index *indx, struct ntfs_inode *ni, CLST vbn,
 	*node = in;
 
 out:
+	if (err == -E_NTFS_CORRUPT) {
+		ntfs_inode_err(&ni->vfs_inode, "directory corrupted");
+		ntfs_set_state(ni->mi.sbi, NTFS_DIRTY_ERROR);
+		err = -EINVAL;
+	}
+
 	if (ib != in->index)
 		kfree(ib);
 
diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h
index eb01f7e76479a..2e4be773728df 100644
--- a/fs/ntfs3/ntfs_fs.h
+++ b/fs/ntfs3/ntfs_fs.h
@@ -53,6 +53,8 @@ enum utf16_endian;
 #define E_NTFS_NONRESIDENT		556
 /* NTFS specific error code about punch hole. */
 #define E_NTFS_NOTALIGNED		557
+/* NTFS specific error code when on-disk struct is corrupted. */
+#define E_NTFS_CORRUPT			558
 
 
 /* sbi->flags */
diff --git a/fs/ntfs3/record.c b/fs/ntfs3/record.c
index 7060f784c2d72..7974ca35a15c6 100644
--- a/fs/ntfs3/record.c
+++ b/fs/ntfs3/record.c
@@ -180,6 +180,12 @@ int mi_read(struct mft_inode *mi, bool is_mft)
 	return 0;
 
 out:
+	if (err == -E_NTFS_CORRUPT) {
+		ntfs_err(sbi->sb, "mft corrupted");
+		ntfs_set_state(sbi, NTFS_DIRTY_ERROR);
+		err = -EINVAL;
+	}
+
 	return err;
 }
 
-- 
2.39.2

[PATCH AUTOSEL 6.4 32/40] fs/ntfs3: Alternative boot if primary boot is corrupted

[Sasha Levin]

From: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

[ Upstream commit 6a4cd3ea7d771be17177d95ff67d22cfa2a38b50 ]

Some code refactoring added also.

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/super.c | 98 +++++++++++++++++++++++++++++++++++-------------
 1 file changed, 71 insertions(+), 27 deletions(-)

diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c
index 5158dd31fd97f..ecf899d571d83 100644
--- a/fs/ntfs3/super.c
+++ b/fs/ntfs3/super.c
@@ -724,6 +724,8 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size,
 	struct MFT_REC *rec;
 	u16 fn, ao;
 	u8 cluster_bits;
+	u32 boot_off = 0;
+	const char *hint = "Primary boot";
 
 	sbi->volume.blocks = dev_size >> PAGE_SHIFT;
 
@@ -731,11 +733,12 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size,
 	if (!bh)
 		return -EIO;
 
+check_boot:
 	err = -EINVAL;
-	boot = (struct NTFS_BOOT *)bh->b_data;
+	boot = (struct NTFS_BOOT *)Add2Ptr(bh->b_data, boot_off);
 
 	if (memcmp(boot->system_id, "NTFS    ", sizeof("NTFS    ") - 1)) {
-		ntfs_err(sb, "Boot's signature is not NTFS.");
+		ntfs_err(sb, "%s signature is not NTFS.", hint);
 		goto out;
 	}
 
@@ -748,14 +751,16 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size,
 			   boot->bytes_per_sector[0];
 	if (boot_sector_size < SECTOR_SIZE ||
 	    !is_power_of_2(boot_sector_size)) {
-		ntfs_err(sb, "Invalid bytes per sector %u.", boot_sector_size);
+		ntfs_err(sb, "%s: invalid bytes per sector %u.", hint,
+			 boot_sector_size);
 		goto out;
 	}
 
 	/* cluster size: 512, 1K, 2K, 4K, ... 2M */
 	sct_per_clst = true_sectors_per_clst(boot);
 	if ((int)sct_per_clst < 0 || !is_power_of_2(sct_per_clst)) {
-		ntfs_err(sb, "Invalid sectors per cluster %u.", sct_per_clst);
+		ntfs_err(sb, "%s: invalid sectors per cluster %u.", hint,
+			 sct_per_clst);
 		goto out;
 	}
 
@@ -771,8 +776,8 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size,
 	if (mlcn * sct_per_clst >= sectors || mlcn2 * sct_per_clst >= sectors) {
 		ntfs_err(
 			sb,
-			"Start of MFT 0x%llx (0x%llx) is out of volume 0x%llx.",
-			mlcn, mlcn2, sectors);
+			"%s: start of MFT 0x%llx (0x%llx) is out of volume 0x%llx.",
+			hint, mlcn, mlcn2, sectors);
 		goto out;
 	}
 
@@ -784,7 +789,7 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size,
 
 	/* Check MFT record size. */
 	if (record_size < SECTOR_SIZE || !is_power_of_2(record_size)) {
-		ntfs_err(sb, "Invalid bytes per MFT record %u (%d).",
+		ntfs_err(sb, "%s: invalid bytes per MFT record %u (%d).", hint,
 			 record_size, boot->record_size);
 		goto out;
 	}
@@ -801,13 +806,13 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size,
 
 	/* Check index record size. */
 	if (sbi->index_size < SECTOR_SIZE || !is_power_of_2(sbi->index_size)) {
-		ntfs_err(sb, "Invalid bytes per index %u(%d).", sbi->index_size,
-			 boot->index_size);
+		ntfs_err(sb, "%s: invalid bytes per index %u(%d).", hint,
+			 sbi->index_size, boot->index_size);
 		goto out;
 	}
 
 	if (sbi->index_size > MAXIMUM_BYTES_PER_INDEX) {
-		ntfs_err(sb, "Unsupported bytes per index %u.",
+		ntfs_err(sb, "%s: unsupported bytes per index %u.", hint,
 			 sbi->index_size);
 		goto out;
 	}
@@ -834,7 +839,7 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size,
 
 	/* Compare boot's cluster and sector. */
 	if (sbi->cluster_size < boot_sector_size) {
-		ntfs_err(sb, "Invalid bytes per cluster (%u).",
+		ntfs_err(sb, "%s: invalid bytes per cluster (%u).", hint,
 			 sbi->cluster_size);
 		goto out;
 	}
@@ -930,7 +935,46 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size,
 
 	err = 0;
 
+	if (bh->b_blocknr && !sb_rdonly(sb)) {
+		/*
+	 	 * Alternative boot is ok but primary is not ok.
+	 	 * Update primary boot.
+		 */
+		struct buffer_head *bh0 = sb_getblk(sb, 0);
+		if (bh0) {
+			if (buffer_locked(bh0))
+				__wait_on_buffer(bh0);
+
+			lock_buffer(bh0);
+			memcpy(bh0->b_data, boot, sizeof(*boot));
+			set_buffer_uptodate(bh0);
+			mark_buffer_dirty(bh0);
+			unlock_buffer(bh0);
+			if (!sync_dirty_buffer(bh0))
+				ntfs_warn(sb, "primary boot is updated");
+			put_bh(bh0);
+		}
+	}
+
 out:
+	if (err == -EINVAL && !bh->b_blocknr && dev_size > PAGE_SHIFT) {
+		u32 block_size = min_t(u32, sector_size, PAGE_SIZE);
+		u64 lbo = dev_size - sizeof(*boot);
+
+		/*
+	 	 * Try alternative boot (last sector)
+		 */
+		brelse(bh);
+
+		sb_set_blocksize(sb, block_size);
+		bh = ntfs_bread(sb, lbo >> blksize_bits(block_size));
+		if (!bh)
+			return -EINVAL;
+
+		boot_off = lbo & (block_size - 1);
+		hint = "Alternative boot";
+		goto check_boot;
+	}
 	brelse(bh);
 
 	return err;
@@ -955,6 +999,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc)
 	struct ATTR_DEF_ENTRY *t;
 	u16 *shared;
 	struct MFT_REF ref;
+	bool ro = sb_rdonly(sb);
 
 	ref.high = 0;
 
@@ -1035,6 +1080,10 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc)
 	sbi->volume.minor_ver = info->minor_ver;
 	sbi->volume.flags = info->flags;
 	sbi->volume.ni = ni;
+	if (info->flags & VOLUME_FLAG_DIRTY) {
+		sbi->volume.real_dirty = true;
+		ntfs_info(sb, "It is recommened to use chkdsk.");
+	}
 
 	/* Load $MFTMirr to estimate recs_mirr. */
 	ref.low = cpu_to_le32(MFT_REC_MIRR);
@@ -1069,21 +1118,16 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc)
 
 	iput(inode);
 
-	if (sbi->flags & NTFS_FLAGS_NEED_REPLAY) {
-		if (!sb_rdonly(sb)) {
-			ntfs_warn(sb,
-				  "failed to replay log file. Can't mount rw!");
-			err = -EINVAL;
-			goto out;
-		}
-	} else if (sbi->volume.flags & VOLUME_FLAG_DIRTY) {
-		if (!sb_rdonly(sb) && !options->force) {
-			ntfs_warn(
-				sb,
-				"volume is dirty and \"force\" flag is not set!");
-			err = -EINVAL;
-			goto out;
-		}
+	if ((sbi->flags & NTFS_FLAGS_NEED_REPLAY) && !ro) {
+		ntfs_warn(sb, "failed to replay log file. Can't mount rw!");
+		err = -EINVAL;
+		goto out;
+	}
+
+	if ((sbi->volume.flags & VOLUME_FLAG_DIRTY) && !ro && !options->force) {
+		ntfs_warn(sb, "volume is dirty and \"force\" flag is not set!");
+		err = -EINVAL;
+		goto out;
 	}
 
 	/* Load $MFT. */
@@ -1173,7 +1217,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc)
 
 		bad_len += len;
 		bad_frags += 1;
-		if (sb_rdonly(sb))
+		if (ro)
 			continue;
 
 		if (wnd_set_used_safe(&sbi->used.bitmap, lcn, len, &tt) || tt) {
-- 
2.39.2

[PATCH AUTOSEL 6.4 33/40] ALSA: hda/realtek: Add quirks for Unis H3C Desktop B760 & Q760

[Sasha Levin]

From: dengxiang <dengxiang@nfschina.com>

[ Upstream commit 73f1c75d5e6bd8ce2a887ef493a66ad1b16ed704 ]

These models use NSIWAY amplifiers for internal speaker, but cannot put
sound outside from these amplifiers. So eapd verbs are needed to initialize
the amplifiers. They can be added during boot to get working sound out
of internal speaker.

Signed-off-by: dengxiang <dengxiang@nfschina.com>
Link: https://lore.kernel.org/r/20230703021751.2945750-1-dengxiang@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index dabfdecece264..7a8f8aef0f7e5 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -11237,6 +11237,7 @@ enum {
 	ALC897_FIXUP_HP_HSMIC_VERB,
 	ALC897_FIXUP_LENOVO_HEADSET_MODE,
 	ALC897_FIXUP_HEADSET_MIC_PIN2,
+	ALC897_FIXUP_UNIS_H3C_X500S,
 };
 
 static const struct hda_fixup alc662_fixups[] = {
@@ -11676,6 +11677,13 @@ static const struct hda_fixup alc662_fixups[] = {
 		.chained = true,
 		.chain_id = ALC897_FIXUP_LENOVO_HEADSET_MODE
 	},
+	[ALC897_FIXUP_UNIS_H3C_X500S] = {
+		.type = HDA_FIXUP_VERBS,
+		.v.verbs = (const struct hda_verb[]) {
+			{ 0x14, AC_VERB_SET_EAPD_BTLENABLE, 0 },
+			{}
+		},
+	},
 };
 
 static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -11837,6 +11845,7 @@ static const struct hda_model_fixup alc662_fixup_models[] = {
 	{.id = ALC662_FIXUP_USI_HEADSET_MODE, .name = "usi-headset"},
 	{.id = ALC662_FIXUP_LENOVO_MULTI_CODECS, .name = "dual-codecs"},
 	{.id = ALC669_FIXUP_ACER_ASPIRE_ETHOS, .name = "aspire-ethos"},
+	{.id = ALC897_FIXUP_UNIS_H3C_X500S, .name = "unis-h3c-x500s"},
 	{}
 };
 
-- 
2.39.2

[PATCH AUTOSEL 6.4 34/40] ALSA: hda: fix a possible null-pointer dereference due to data race in snd_hdac_regmap_sync()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit 1f4a08fed450db87fbb5ff5105354158bdbe1a22 ]

The variable codec->regmap is often protected by the lock
codec->regmap_lock when is accessed. However, it is accessed without
holding the lock when is accessed in snd_hdac_regmap_sync():

  if (codec->regmap)

In my opinion, this may be a harmful race, because if codec->regmap is
set to NULL right after the condition is checked, a null-pointer
dereference can occur in the called function regcache_sync():

  map->lock(map->lock_arg); --> Line 360 in drivers/base/regmap/regcache.c

To fix this possible null-pointer dereference caused by data race, the
mutex_lock coverage is extended to protect the if statement as well as the
function call to regcache_sync().

[ Note: the lack of the regmap_lock itself is harmless for the current
  codec driver implementations, as snd_hdac_regmap_sync() is only for
  PM runtime resume that is prohibited during the codec probe.
  But the change makes the whole code more consistent, so it's merged
  as is -- tiwai ]

Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/20230703031016.1184711-1-islituo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_regmap.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/sound/hda/hdac_regmap.c b/sound/hda/hdac_regmap.c
index fe3587547cfec..39610a15bcc98 100644
--- a/sound/hda/hdac_regmap.c
+++ b/sound/hda/hdac_regmap.c
@@ -597,10 +597,9 @@ EXPORT_SYMBOL_GPL(snd_hdac_regmap_update_raw_once);
  */
 void snd_hdac_regmap_sync(struct hdac_device *codec)
 {
-	if (codec->regmap) {
-		mutex_lock(&codec->regmap_lock);
+	mutex_lock(&codec->regmap_lock);
+	if (codec->regmap)
 		regcache_sync(codec->regmap);
-		mutex_unlock(&codec->regmap_lock);
-	}
+	mutex_unlock(&codec->regmap_lock);
 }
 EXPORT_SYMBOL_GPL(snd_hdac_regmap_sync);
-- 
2.39.2

[PATCH AUTOSEL 6.4 35/40] ALSA: hda/realtek: Add quirk for ASUS ROG GX650P

[Sasha Levin]

From: "Luke D. Jones" <luke@ljones.dev>

[ Upstream commit 8cc87c055d28320e5fa5457922f43bc07dec58bd ]

Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series which uses an I2C connected Cirrus amp.

While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7a8f8aef0f7e5..cda8415dab9fb 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7065,6 +7065,8 @@ enum {
 	ALC285_FIXUP_SPEAKER2_TO_DAC1,
 	ALC285_FIXUP_ASUS_SPEAKER2_TO_DAC1,
 	ALC285_FIXUP_ASUS_HEADSET_MIC,
+	ALC285_FIXUP_ASUS_I2C_SPEAKER2_TO_DAC1,
+	ALC285_FIXUP_ASUS_I2C_HEADSET_MIC,
 	ALC280_FIXUP_HP_HEADSET_MIC,
 	ALC221_FIXUP_HP_FRONT_MIC,
 	ALC292_FIXUP_TPT460,
@@ -8051,6 +8053,22 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC285_FIXUP_ASUS_SPEAKER2_TO_DAC1
 	},
+	[ALC285_FIXUP_ASUS_I2C_SPEAKER2_TO_DAC1] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc285_fixup_speaker2_to_dac1,
+		.chained = true,
+		.chain_id = ALC287_FIXUP_CS35L41_I2C_2
+	},
+	[ALC285_FIXUP_ASUS_I2C_HEADSET_MIC] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x03a11050 },
+			{ 0x1b, 0x03a11c30 },
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC285_FIXUP_ASUS_I2C_SPEAKER2_TO_DAC1
+	},
 	[ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -9525,6 +9543,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x1313, "Asus K42JZ", ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
+	SND_PCI_QUIRK(0x1043, 0x1433, "ASUS GX650P", ALC285_FIXUP_ASUS_I2C_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1473, "ASUS GU604V", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1483, "ASUS GU603V", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1493, "ASUS GV601V", ALC285_FIXUP_ASUS_HEADSET_MIC),
-- 
2.39.2

[PATCH AUTOSEL 6.4 36/40] ALSA: hda/realtek: Add quirk for ASUS ROG GA402X

[Sasha Levin]

From: "Luke D. Jones" <luke@ljones.dev>

[ Upstream commit 9abc77fb144fe916fd2f592dc4b8c7bade02e58a ]

Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GA402X series which uses an I2C connected Cirrus amp.

While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index cda8415dab9fb..20f29d59b242b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9544,6 +9544,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
 	SND_PCI_QUIRK(0x1043, 0x1433, "ASUS GX650P", ALC285_FIXUP_ASUS_I2C_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1043, 0x1463, "Asus GA402X", ALC285_FIXUP_ASUS_I2C_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1473, "ASUS GU604V", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1483, "ASUS GU603V", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1493, "ASUS GV601V", ALC285_FIXUP_ASUS_HEADSET_MIC),
-- 
2.39.2

[PATCH AUTOSEL 6.4 37/40] ALSA: hda/realtek: Amend G634 quirk to enable rear speakers

[Sasha Levin]

From: "Luke D. Jones" <luke@ljones.dev>

[ Upstream commit b759a5f097cd42c666f1ebca8da50ff507435fbe ]

Amends the last quirk for the G634 with 0x1caf subsys to enable the rear
speakers via pincfg.

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-4-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 20f29d59b242b..e49390b714f61 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7065,6 +7065,7 @@ enum {
 	ALC285_FIXUP_SPEAKER2_TO_DAC1,
 	ALC285_FIXUP_ASUS_SPEAKER2_TO_DAC1,
 	ALC285_FIXUP_ASUS_HEADSET_MIC,
+	ALC285_FIXUP_ASUS_SPI_REAR_SPEAKERS,
 	ALC285_FIXUP_ASUS_I2C_SPEAKER2_TO_DAC1,
 	ALC285_FIXUP_ASUS_I2C_HEADSET_MIC,
 	ALC280_FIXUP_HP_HEADSET_MIC,
@@ -8053,6 +8054,15 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC285_FIXUP_ASUS_SPEAKER2_TO_DAC1
 	},
+	[ALC285_FIXUP_ASUS_SPI_REAR_SPEAKERS] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x14, 0x90170120 },
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC285_FIXUP_ASUS_HEADSET_MIC
+	},
 	[ALC285_FIXUP_ASUS_I2C_SPEAKER2_TO_DAC1] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc285_fixup_speaker2_to_dac1,
@@ -9573,7 +9583,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
 	SND_PCI_QUIRK(0x1043, 0x1c62, "ASUS GU603", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS),
-	SND_PCI_QUIRK(0x1043, 0x1caf, "ASUS G634JYR/JZR", ALC285_FIXUP_ASUS_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1043, 0x1caf, "ASUS G634JYR/JZR", ALC285_FIXUP_ASUS_SPI_REAR_SPEAKERS),
 	SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE),
-- 
2.39.2

[PATCH AUTOSEL 6.4 38/40] ALSA: hda/realtek: Add quirk for ASUS ROG G614Jx

[Sasha Levin]

From: "Luke D. Jones" <luke@ljones.dev>

[ Upstream commit 33d7c9c3bf70ed91191a2bedbbc03783b824b5de ]

Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG G614J series which uses an SPI connected Cirrus amp.

While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-5-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index e49390b714f61..7534772539316 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9583,6 +9583,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
 	SND_PCI_QUIRK(0x1043, 0x1c62, "ASUS GU603", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS),
+	SND_PCI_QUIRK(0x1043, 0x1c9f, "ASUS G614JI", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1caf, "ASUS G634JYR/JZR", ALC285_FIXUP_ASUS_SPI_REAR_SPEAKERS),
 	SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401),
-- 
2.39.2

[PATCH AUTOSEL 6.4 39/40] apparmor: fix use of strcpy in policy_unpack_test

[Sasha Levin]

From: Rae Moar <rmoar@google.com>

[ Upstream commit b54aebd4411134b525a82d663a26b2f135ecb7e8 ]

Replace the use of strcpy() in build_aa_ext_struct() in
policy_unpack_test.c with strscpy().

strscpy() is the safer method to use to ensure the buffer does not
overflow. This was found by kernel test robot:
https://lore.kernel.org/all/202301040348.NbfVsXO0-lkp@intel.com/.

Reported-by: kernel test robot <lkp@intel.com>

Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/apparmor/policy_unpack_test.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/security/apparmor/policy_unpack_test.c b/security/apparmor/policy_unpack_test.c
index e1bfdab524b79..5c9bde25e56df 100644
--- a/security/apparmor/policy_unpack_test.c
+++ b/security/apparmor/policy_unpack_test.c
@@ -69,31 +69,30 @@ static struct aa_ext *build_aa_ext_struct(struct policy_unpack_fixture *puf,
 
 	*buf = AA_NAME;
 	*(buf + 1) = strlen(TEST_STRING_NAME) + 1;
-	strcpy(buf + 3, TEST_STRING_NAME);
+	strscpy(buf + 3, TEST_STRING_NAME, e->end - (void *)(buf + 3));
 
 	buf = e->start + TEST_STRING_BUF_OFFSET;
 	*buf = AA_STRING;
 	*(buf + 1) = strlen(TEST_STRING_DATA) + 1;
-	strcpy(buf + 3, TEST_STRING_DATA);
-
+	strscpy(buf + 3, TEST_STRING_DATA, e->end - (void *)(buf + 3));
 	buf = e->start + TEST_NAMED_U32_BUF_OFFSET;
 	*buf = AA_NAME;
 	*(buf + 1) = strlen(TEST_U32_NAME) + 1;
-	strcpy(buf + 3, TEST_U32_NAME);
+	strscpy(buf + 3, TEST_U32_NAME, e->end - (void *)(buf + 3));
 	*(buf + 3 + strlen(TEST_U32_NAME) + 1) = AA_U32;
 	*((u32 *)(buf + 3 + strlen(TEST_U32_NAME) + 2)) = TEST_U32_DATA;
 
 	buf = e->start + TEST_NAMED_U64_BUF_OFFSET;
 	*buf = AA_NAME;
 	*(buf + 1) = strlen(TEST_U64_NAME) + 1;
-	strcpy(buf + 3, TEST_U64_NAME);
+	strscpy(buf + 3, TEST_U64_NAME, e->end - (void *)(buf + 3));
 	*(buf + 3 + strlen(TEST_U64_NAME) + 1) = AA_U64;
 	*((u64 *)(buf + 3 + strlen(TEST_U64_NAME) + 2)) = TEST_U64_DATA;
 
 	buf = e->start + TEST_NAMED_BLOB_BUF_OFFSET;
 	*buf = AA_NAME;
 	*(buf + 1) = strlen(TEST_BLOB_NAME) + 1;
-	strcpy(buf + 3, TEST_BLOB_NAME);
+	strscpy(buf + 3, TEST_BLOB_NAME, e->end - (void *)(buf + 3));
 	*(buf + 3 + strlen(TEST_BLOB_NAME) + 1) = AA_BLOB;
 	*(buf + 3 + strlen(TEST_BLOB_NAME) + 2) = TEST_BLOB_DATA_SIZE;
 	memcpy(buf + 3 + strlen(TEST_BLOB_NAME) + 6,
@@ -102,7 +101,7 @@ static struct aa_ext *build_aa_ext_struct(struct policy_unpack_fixture *puf,
 	buf = e->start + TEST_NAMED_ARRAY_BUF_OFFSET;
 	*buf = AA_NAME;
 	*(buf + 1) = strlen(TEST_ARRAY_NAME) + 1;
-	strcpy(buf + 3, TEST_ARRAY_NAME);
+	strscpy(buf + 3, TEST_ARRAY_NAME, e->end - (void *)(buf + 3));
 	*(buf + 3 + strlen(TEST_ARRAY_NAME) + 1) = AA_ARRAY;
 	*((u16 *)(buf + 3 + strlen(TEST_ARRAY_NAME) + 2)) = TEST_ARRAY_SIZE;
 
-- 
2.39.2

[PATCH AUTOSEL 6.4 40/40] ALSA: hda/realtek: Add quirk for ASUS ROG GZ301V

[Sasha Levin]

From: "Luke D. Jones" <luke@ljones.dev>

[ Upstream commit 5251605f4d297a0eb5d3b7f39f9dcee9e4d0115a ]

Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GZ301V series which uses an SPI connected Cirrus amp.

While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230706223323.30871-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7534772539316..f7b5765db50d1 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9559,6 +9559,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x1483, "ASUS GU603V", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1493, "ASUS GV601V", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A),
+	SND_PCI_QUIRK(0x1043, 0x1573, "ASUS GZ301V", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK),
 	SND_PCI_QUIRK(0x1043, 0x1683, "ASUS UM3402YAR", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401),
-- 
2.39.2