[PATCH v11 0/8] Re-enable IDXD kernel workqueue under DMA API

[PATCH v11 0/8] Re-enable IDXD kernel workqueue under DMA API

[Jacob Pan]

Hi Joerg and all,

IDXD kernel work queues were disabled due to the flawed use of kernel VA
and SVA API.
Link: https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/

The solution is to enable it under DMA API where IDXD shared workqueue users
can use ENQCMDS to submit work on buffers mapped by DMA API.

This patchset adds support for attaching PASID to the device's default
domain and the ability to allocate global PASIDs from IOMMU APIs. IDXD driver
can then re-enable the kernel work queues and use them under DMA API.

This depends on the IOASID removal series. (merged)
https://lore.kernel.org/all/ZCaUBJvUMsJyD7EW@8bytes.org/


Thanks,

Jacob

---
Changelog:
v11:
	- Rebased onto Joerg's next tree (v6.5-rc1)
	- Split RIDPASID check in invalidation code into patch (6/8)
	- Renamed iommu_alloc_global_pasid_dev to iommu_alloc_global_pasid (2/8)
	- Added WARN_ON if no dev_pasid is found during remove (7/8)
v10:
	- Fix global PASID alloc function with device's max_pasid=0
v9:
	- Fix an IDXD driver issue where user interrupt enable bit got cleared
	  during device enable/disable cycle. Reported and tested by
	  Tony Zhu <tony.zhu@intel.com>
	- Rebased to v6.4-rc7
v8:
	- further vt-d driver refactoring (3-6) around set/remove device PASID
	  (Baolu)
	- make consistent use of NO_PASID in SMMU code (Jean)
	- fix off-by-one error in max PASID check (Kevin)
v7:
	- renamed IOMMU_DEF_RID_PASID to be IOMMU_NO_PASID to be more generic
	  (Jean)
	- simplify range checking for sva PASID (Baolu) 
v6:
	- use a simplified version of vt-d driver change for set_device_pasid
	  from Baolu.
	- check and rename global PASID allocation base
v5:
	- exclude two patches related to supervisor mode, taken by VT-d
	maintainer Baolu.
	- move PASID range check into allocation API so that device drivers
	  only need to pass in struct device*. (Kevin)
	- factor out helper functions in device-domain attach (Baolu)
	- make explicit use of RID_PASID across architectures
v4:
	- move dummy functions outside ifdef CONFIG_IOMMU_SVA (Baolu)
	- dropped domain type check while disabling idxd system PASID (Baolu)

v3:
	- moved global PASID allocation API from SVA to IOMMU (Kevin)
	- remove #ifdef around global PASID reservation during boot (Baolu)
	- remove restriction on PASID 0 allocation (Baolu)
	- fix a bug in sysfs domain change when attaching devices
	- clear idxd user interrupt enable bit after disabling device( Fenghua)
v2:
	- refactored device PASID attach domain ops based on Baolu's early patch
	- addressed TLB flush gap
	- explicitly reserve RID_PASID from SVA PASID number space
	- get dma domain directly, avoid checking domain types



Jacob Pan (3):
  iommu: Generalize PASID 0 for normal DMA w/o PASID
  iommu: Move global PASID allocation from SVA to core
  dmaengine/idxd: Re-enable kernel workqueue under DMA API

Lu Baolu (5):
  iommu/vt-d: Add domain_flush_pasid_iotlb()
  iommu/vt-d: Remove pasid_mutex
  iommu/vt-d: Make prq draining code generic
  iommu/vt-d: Prepare for set_dev_pasid callback
  iommu/vt-d: Add set_dev_pasid callback for dma domain

 drivers/dma/idxd/device.c                     |  39 ++---
 drivers/dma/idxd/dma.c                        |   5 +-
 drivers/dma/idxd/idxd.h                       |   9 +
 drivers/dma/idxd/init.c                       |  54 +++++-
 drivers/dma/idxd/sysfs.c                      |   7 -
 .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   |   2 +-
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   |  16 +-
 drivers/iommu/intel/iommu.c                   | 157 +++++++++++++++---
 drivers/iommu/intel/iommu.h                   |   9 +
 drivers/iommu/intel/pasid.c                   |   2 +-
 drivers/iommu/intel/pasid.h                   |   2 -
 drivers/iommu/intel/svm.c                     |  62 +------
 drivers/iommu/iommu-sva.c                     |  29 ++--
 drivers/iommu/iommu.c                         |  28 ++++
 include/linux/iommu.h                         |  11 ++
 15 files changed, 287 insertions(+), 145 deletions(-)

-- 
2.25.1

[PATCH v11 1/8] iommu: Generalize PASID 0 for normal DMA w/o PASID

[Jacob Pan]

PCIe Process address space ID (PASID) is used to tag DMA traffic, it
provides finer grained isolation than requester ID (RID).

For each device/RID, 0 is a special PASID for the normal DMA (no
PASID). This is universal across all architectures that supports PASID,
therefore warranted to be reserved globally and declared in the common
header. Consequently, we can avoid the conflict between different PASID
use cases in the generic code. e.g. SVA and DMA API with PASIDs.

This paved away for device drivers to choose global PASID policy while
continue doing normal DMA.

Noting that VT-d could support none-zero RID/NO_PASID, but currently not
used.

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
v8:
   - make consistent use of NO_PASID in SMMU code
   - remove PASID_MIN
v7:
   - renamed IOMMU_DEF_RID_PASID to be IOMMU_NO_PASID to be more generic
v6:
   - let SMMU code use the common RID_PASID macro
---
 .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   |  2 +-
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   | 16 ++++++-------
 drivers/iommu/intel/iommu.c                   | 24 +++++++++----------
 drivers/iommu/intel/pasid.c                   |  2 +-
 drivers/iommu/intel/pasid.h                   |  2 --
 include/linux/iommu.h                         |  1 +
 6 files changed, 23 insertions(+), 24 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
index a5a63b1c947e..5e6b39881c04 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
@@ -80,7 +80,7 @@ arm_smmu_share_asid(struct mm_struct *mm, u16 asid)
 	 * be some overlap between use of both ASIDs, until we invalidate the
 	 * TLB.
 	 */
-	arm_smmu_write_ctx_desc(smmu_domain, 0, cd);
+	arm_smmu_write_ctx_desc(smmu_domain, IOMMU_NO_PASID, cd);
 
 	/* Invalidate TLB entries previously associated with that context */
 	arm_smmu_tlb_inv_asid(smmu, asid);
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 9b0dc3505601..ee70687f060b 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -1059,7 +1059,7 @@ int arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain, int ssid,
 	/*
 	 * This function handles the following cases:
 	 *
-	 * (1) Install primary CD, for normal DMA traffic (SSID = 0).
+	 * (1) Install primary CD, for normal DMA traffic (SSID = IOMMU_NO_PASID = 0).
 	 * (2) Install a secondary CD, for SID+SSID traffic.
 	 * (3) Update ASID of a CD. Atomically write the first 64 bits of the
 	 *     CD, then invalidate the old entry and mappings.
@@ -1607,7 +1607,7 @@ static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64 *evt)
 
 	sid = FIELD_GET(PRIQ_0_SID, evt[0]);
 	ssv = FIELD_GET(PRIQ_0_SSID_V, evt[0]);
-	ssid = ssv ? FIELD_GET(PRIQ_0_SSID, evt[0]) : 0;
+	ssid = ssv ? FIELD_GET(PRIQ_0_SSID, evt[0]) : IOMMU_NO_PASID;
 	last = FIELD_GET(PRIQ_0_PRG_LAST, evt[0]);
 	grpid = FIELD_GET(PRIQ_1_PRG_IDX, evt[1]);
 
@@ -1748,7 +1748,7 @@ arm_smmu_atc_inv_to_cmd(int ssid, unsigned long iova, size_t size,
 	 */
 	*cmd = (struct arm_smmu_cmdq_ent) {
 		.opcode			= CMDQ_OP_ATC_INV,
-		.substream_valid	= !!ssid,
+		.substream_valid	= (ssid != IOMMU_NO_PASID),
 		.atc.ssid		= ssid,
 	};
 
@@ -1795,7 +1795,7 @@ static int arm_smmu_atc_inv_master(struct arm_smmu_master *master)
 	struct arm_smmu_cmdq_ent cmd;
 	struct arm_smmu_cmdq_batch cmds;
 
-	arm_smmu_atc_inv_to_cmd(0, 0, 0, &cmd);
+	arm_smmu_atc_inv_to_cmd(IOMMU_NO_PASID, 0, 0, &cmd);
 
 	cmds.num = 0;
 	for (i = 0; i < master->num_streams; i++) {
@@ -1875,7 +1875,7 @@ static void arm_smmu_tlb_inv_context(void *cookie)
 		cmd.tlbi.vmid	= smmu_domain->s2_cfg.vmid;
 		arm_smmu_cmdq_issue_cmd_with_sync(smmu, &cmd);
 	}
-	arm_smmu_atc_inv_domain(smmu_domain, 0, 0, 0);
+	arm_smmu_atc_inv_domain(smmu_domain, IOMMU_NO_PASID, 0, 0);
 }
 
 static void __arm_smmu_tlb_inv_range(struct arm_smmu_cmdq_ent *cmd,
@@ -1968,7 +1968,7 @@ static void arm_smmu_tlb_inv_range_domain(unsigned long iova, size_t size,
 	 * Unfortunately, this can't be leaf-only since we may have
 	 * zapped an entire table.
 	 */
-	arm_smmu_atc_inv_domain(smmu_domain, 0, iova, size);
+	arm_smmu_atc_inv_domain(smmu_domain, IOMMU_NO_PASID, iova, size);
 }
 
 void arm_smmu_tlb_inv_range_asid(unsigned long iova, size_t size, int asid,
@@ -2142,7 +2142,7 @@ static int arm_smmu_domain_finalise_s1(struct arm_smmu_domain *smmu_domain,
 	 * the master has been added to the devices list for this domain.
 	 * This isn't an issue because the STE hasn't been installed yet.
 	 */
-	ret = arm_smmu_write_ctx_desc(smmu_domain, 0, &cfg->cd);
+	ret = arm_smmu_write_ctx_desc(smmu_domain, IOMMU_NO_PASID, &cfg->cd);
 	if (ret)
 		goto out_free_cd_tables;
 
@@ -2328,7 +2328,7 @@ static void arm_smmu_enable_ats(struct arm_smmu_master *master)
 	pdev = to_pci_dev(master->dev);
 
 	atomic_inc(&smmu_domain->nr_ats_masters);
-	arm_smmu_atc_inv_domain(smmu_domain, 0, 0, 0);
+	arm_smmu_atc_inv_domain(smmu_domain, IOMMU_NO_PASID, 0, 0);
 	if (pci_enable_ats(pdev, stu))
 		dev_err(master->dev, "Failed to enable ATS (STU %zu)\n", stu);
 }
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index d5ca2387e65c..89013a2913af 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -877,7 +877,7 @@ void dmar_fault_dump_ptes(struct intel_iommu *iommu, u16 source_id,
 	}
 	/* For request-without-pasid, get the pasid from context entry */
 	if (intel_iommu_sm && pasid == IOMMU_PASID_INVALID)
-		pasid = PASID_RID2PASID;
+		pasid = IOMMU_NO_PASID;
 
 	dir_index = pasid >> PASID_PDE_SHIFT;
 	pde = &dir[dir_index];
@@ -1449,7 +1449,7 @@ static void __iommu_flush_dev_iotlb(struct device_domain_info *info,
 	qdep = info->ats_qdep;
 	qi_flush_dev_iotlb(info->iommu, sid, info->pfsid,
 			   qdep, addr, mask);
-	quirk_extra_dev_tlb_flush(info, addr, mask, PASID_RID2PASID, qdep);
+	quirk_extra_dev_tlb_flush(info, addr, mask, IOMMU_NO_PASID, qdep);
 }
 
 static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
@@ -1484,7 +1484,7 @@ static void iommu_flush_iotlb_psi(struct intel_iommu *iommu,
 		ih = 1 << 6;
 
 	if (domain->use_first_level) {
-		qi_flush_piotlb(iommu, did, PASID_RID2PASID, addr, pages, ih);
+		qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, addr, pages, ih);
 	} else {
 		unsigned long bitmask = aligned_pages - 1;
 
@@ -1554,7 +1554,7 @@ static void intel_flush_iotlb_all(struct iommu_domain *domain)
 		u16 did = domain_id_iommu(dmar_domain, iommu);
 
 		if (dmar_domain->use_first_level)
-			qi_flush_piotlb(iommu, did, PASID_RID2PASID, 0, -1, 0);
+			qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, 0, -1, 0);
 		else
 			iommu->flush.flush_iotlb(iommu, did, 0, 0,
 						 DMA_TLB_DSI_FLUSH);
@@ -1940,7 +1940,7 @@ static int domain_context_mapping_one(struct dmar_domain *domain,
 				context_pdts(pds);
 
 		/* Setup the RID_PASID field: */
-		context_set_sm_rid2pasid(context, PASID_RID2PASID);
+		context_set_sm_rid2pasid(context, IOMMU_NO_PASID);
 
 		/*
 		 * Setup the Device-TLB enable bit and Page request
@@ -2420,13 +2420,13 @@ static int dmar_domain_attach_device(struct dmar_domain *domain,
 		/* Setup the PASID entry for requests without PASID: */
 		if (hw_pass_through && domain_type_is_si(domain))
 			ret = intel_pasid_setup_pass_through(iommu, domain,
-					dev, PASID_RID2PASID);
+					dev, IOMMU_NO_PASID);
 		else if (domain->use_first_level)
 			ret = domain_setup_first_level(iommu, domain, dev,
-					PASID_RID2PASID);
+					IOMMU_NO_PASID);
 		else
 			ret = intel_pasid_setup_second_level(iommu, domain,
-					dev, PASID_RID2PASID);
+					dev, IOMMU_NO_PASID);
 		if (ret) {
 			dev_err(dev, "Setup RID2PASID failed\n");
 			device_block_translation(dev);
@@ -3961,7 +3961,7 @@ static void dmar_remove_one_dev_info(struct device *dev)
 	if (!dev_is_real_dma_subdevice(info->dev)) {
 		if (dev_is_pci(info->dev) && sm_supported(iommu))
 			intel_pasid_tear_down_entry(iommu, info->dev,
-					PASID_RID2PASID, false);
+					IOMMU_NO_PASID, false);
 
 		iommu_disable_pci_caps(info);
 		domain_context_clear(info);
@@ -3990,7 +3990,7 @@ static void device_block_translation(struct device *dev)
 	if (!dev_is_real_dma_subdevice(dev)) {
 		if (sm_supported(iommu))
 			intel_pasid_tear_down_entry(iommu, dev,
-						    PASID_RID2PASID, false);
+						    IOMMU_NO_PASID, false);
 		else
 			domain_context_clear(info);
 	}
@@ -4324,7 +4324,7 @@ static void domain_set_force_snooping(struct dmar_domain *domain)
 
 	list_for_each_entry(info, &domain->devices, link)
 		intel_pasid_setup_page_snoop_control(info->iommu, info->dev,
-						     PASID_RID2PASID);
+						     IOMMU_NO_PASID);
 }
 
 static bool intel_iommu_enforce_cache_coherency(struct iommu_domain *domain)
@@ -4980,7 +4980,7 @@ void quirk_extra_dev_tlb_flush(struct device_domain_info *info,
 		return;
 
 	sid = PCI_DEVID(info->bus, info->devfn);
-	if (pasid == PASID_RID2PASID) {
+	if (pasid == IOMMU_NO_PASID) {
 		qi_flush_dev_iotlb(info->iommu, sid, info->pfsid,
 				   qdep, address, mask);
 	} else {
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index c5d479770e12..23dca3bc319d 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -438,7 +438,7 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu,
 	 * SVA usage, device could do DMA with multiple PASIDs. It is more
 	 * efficient to flush devTLB specific to the PASID.
 	 */
-	if (pasid == PASID_RID2PASID)
+	if (pasid == IOMMU_NO_PASID)
 		qi_flush_dev_iotlb(iommu, sid, pfsid, qdep, 0, 64 - VTD_PAGE_SHIFT);
 	else
 		qi_flush_dev_iotlb_pasid(iommu, sid, pfsid, pasid, qdep, 0, 64 - VTD_PAGE_SHIFT);
diff --git a/drivers/iommu/intel/pasid.h b/drivers/iommu/intel/pasid.h
index d6b7d21244b1..4e9e68c3c388 100644
--- a/drivers/iommu/intel/pasid.h
+++ b/drivers/iommu/intel/pasid.h
@@ -10,8 +10,6 @@
 #ifndef __INTEL_PASID_H
 #define __INTEL_PASID_H
 
-#define PASID_RID2PASID			0x0
-#define PASID_MIN			0x1
 #define PASID_MAX			0x100000
 #define PASID_PTE_MASK			0x3F
 #define PASID_PTE_PRESENT		1
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index b1dcb1b9b170..485e4bb0347e 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -196,6 +196,7 @@ enum iommu_dev_features {
 	IOMMU_DEV_FEAT_IOPF,
 };
 
+#define IOMMU_NO_PASID	(0U) /* Reserved for DMA w/o PASID */
 #define IOMMU_PASID_INVALID	(-1U)
 typedef unsigned int ioasid_t;
 
-- 
2.25.1

[PATCH v11 2/8] iommu: Move global PASID allocation from SVA to core

[Jacob Pan]

Global PASID can be used beyond SVA. For example, drivers that use
Intel ENQCMD to submit work must use global PASIDs in that PASID
is stored in a per CPU MSR. When such device need to submit work
for in-kernel DMA with PASID, it must allocate PASIDs from the same
global number space to avoid conflict.

This patch moves global PASID allocation APIs from SVA to IOMMU APIs.
Reserved PASIDs, currently only RID_PASID, are excluded from the global
PASID allocation.

It is expected that device drivers will use the allocated PASIDs to
attach to appropriate IOMMU domains for use.

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
v8: fix off-by-one in max_pasid check
v7: simplify range check (Baolu)
v6: explicitly exclude reserved a range from SVA PASID allocation
    check mm PASID compatibility with device
v5: move PASID range check inside API so that device drivers only pass
    in struct device* (Kevin)
v4: move dummy functions outside ifdef CONFIG_IOMMU_SVA (Baolu)
---
 drivers/iommu/iommu-sva.c | 29 ++++++++++-------------------
 drivers/iommu/iommu.c     | 28 ++++++++++++++++++++++++++++
 include/linux/iommu.h     | 10 ++++++++++
 3 files changed, 48 insertions(+), 19 deletions(-)

diff --git a/drivers/iommu/iommu-sva.c b/drivers/iommu/iommu-sva.c
index 05c0fb2acbc4..b78671a8a914 100644
--- a/drivers/iommu/iommu-sva.c
+++ b/drivers/iommu/iommu-sva.c
@@ -10,34 +10,30 @@
 #include "iommu-sva.h"
 
 static DEFINE_MUTEX(iommu_sva_lock);
-static DEFINE_IDA(iommu_global_pasid_ida);
 
 /* Allocate a PASID for the mm within range (inclusive) */
-static int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t max)
+static int iommu_sva_alloc_pasid(struct mm_struct *mm, struct device *dev)
 {
+	ioasid_t pasid;
 	int ret = 0;
 
-	if (min == IOMMU_PASID_INVALID ||
-	    max == IOMMU_PASID_INVALID ||
-	    min == 0 || max < min)
-		return -EINVAL;
-
 	if (!arch_pgtable_dma_compat(mm))
 		return -EBUSY;
 
 	mutex_lock(&iommu_sva_lock);
 	/* Is a PASID already associated with this mm? */
 	if (mm_valid_pasid(mm)) {
-		if (mm->pasid < min || mm->pasid > max)
+		if (mm->pasid >= dev->iommu->max_pasids)
 			ret = -EOVERFLOW;
 		goto out;
 	}
 
-	ret = ida_alloc_range(&iommu_global_pasid_ida, min, max, GFP_KERNEL);
-	if (ret < 0)
+	pasid = iommu_alloc_global_pasid(dev);
+	if (pasid == IOMMU_PASID_INVALID) {
+		ret = -ENOSPC;
 		goto out;
-
-	mm->pasid = ret;
+	}
+	mm->pasid = pasid;
 	ret = 0;
 out:
 	mutex_unlock(&iommu_sva_lock);
@@ -64,15 +60,10 @@ struct iommu_sva *iommu_sva_bind_device(struct device *dev, struct mm_struct *mm
 {
 	struct iommu_domain *domain;
 	struct iommu_sva *handle;
-	ioasid_t max_pasids;
 	int ret;
 
-	max_pasids = dev->iommu->max_pasids;
-	if (!max_pasids)
-		return ERR_PTR(-EOPNOTSUPP);
-
 	/* Allocate mm->pasid if necessary. */
-	ret = iommu_sva_alloc_pasid(mm, 1, max_pasids - 1);
+	ret = iommu_sva_alloc_pasid(mm, dev);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -217,5 +208,5 @@ void mm_pasid_drop(struct mm_struct *mm)
 	if (likely(!mm_valid_pasid(mm)))
 		return;
 
-	ida_free(&iommu_global_pasid_ida, mm->pasid);
+	iommu_free_global_pasid(mm->pasid);
 }
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 4352a149a935..1461c845d76a 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -39,6 +39,7 @@
 
 static struct kset *iommu_group_kset;
 static DEFINE_IDA(iommu_group_ida);
+static DEFINE_IDA(iommu_global_pasid_ida);
 
 static unsigned int iommu_def_domain_type __read_mostly;
 static bool iommu_dma_strict __read_mostly = IS_ENABLED(CONFIG_IOMMU_DEFAULT_DMA_STRICT);
@@ -3414,3 +3415,30 @@ struct iommu_domain *iommu_sva_domain_alloc(struct device *dev,
 
 	return domain;
 }
+
+ioasid_t iommu_alloc_global_pasid(struct device *dev)
+{
+	int ret;
+
+	/* max_pasids == 0 means that the device does not support PASID */
+	if (!dev->iommu->max_pasids)
+		return IOMMU_PASID_INVALID;
+
+	/*
+	 * max_pasids is set up by vendor driver based on number of PASID bits
+	 * supported but the IDA allocation is inclusive.
+	 */
+	ret = ida_alloc_range(&iommu_global_pasid_ida, IOMMU_FIRST_GLOBAL_PASID,
+			      dev->iommu->max_pasids - 1, GFP_KERNEL);
+	return ret < 0 ? IOMMU_PASID_INVALID : ret;
+}
+EXPORT_SYMBOL_GPL(iommu_alloc_global_pasid);
+
+void iommu_free_global_pasid(ioasid_t pasid)
+{
+	if (WARN_ON(pasid == IOMMU_PASID_INVALID))
+		return;
+
+	ida_free(&iommu_global_pasid_ida, pasid);
+}
+EXPORT_SYMBOL_GPL(iommu_free_global_pasid);
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 485e4bb0347e..a745798b3f1d 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -197,6 +197,7 @@ enum iommu_dev_features {
 };
 
 #define IOMMU_NO_PASID	(0U) /* Reserved for DMA w/o PASID */
+#define IOMMU_FIRST_GLOBAL_PASID	(1U) /*starting range for allocation */
 #define IOMMU_PASID_INVALID	(-1U)
 typedef unsigned int ioasid_t;
 
@@ -730,6 +731,8 @@ void iommu_detach_device_pasid(struct iommu_domain *domain,
 struct iommu_domain *
 iommu_get_domain_for_dev_pasid(struct device *dev, ioasid_t pasid,
 			       unsigned int type);
+ioasid_t iommu_alloc_global_pasid(struct device *dev);
+void iommu_free_global_pasid(ioasid_t pasid);
 #else /* CONFIG_IOMMU_API */
 
 struct iommu_ops {};
@@ -1091,6 +1094,13 @@ iommu_get_domain_for_dev_pasid(struct device *dev, ioasid_t pasid,
 {
 	return NULL;
 }
+
+static inline ioasid_t iommu_alloc_global_pasid(struct device *dev)
+{
+	return IOMMU_PASID_INVALID;
+}
+
+static inline void iommu_free_global_pasid(ioasid_t pasid) {}
 #endif /* CONFIG_IOMMU_API */
 
 /**
-- 
2.25.1

[PATCH v11 3/8] iommu/vt-d: Add domain_flush_pasid_iotlb()

[Jacob Pan]

From: Lu Baolu <baolu.lu@linux.intel.com>

The VT-d spec requires to use PASID-based-IOTLB invalidation descriptor
to invalidate IOTLB and the paging-structure caches for a first-stage
page table. Add a generic helper to do this.

RID2PASID is used if the domain has been attached to a physical device,
otherwise real PASIDs that the domain has been attached to will be used.
The 'real' PASID attachment is handled in the subsequent change.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
---
 drivers/iommu/intel/iommu.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 89013a2913af..bb8316fec1aa 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1467,6 +1467,18 @@ static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
+static void domain_flush_pasid_iotlb(struct intel_iommu *iommu,
+				     struct dmar_domain *domain, u64 addr,
+				     unsigned long npages, bool ih)
+{
+	u16 did = domain_id_iommu(domain, iommu);
+	unsigned long flags;
+
+	spin_lock_irqsave(&domain->lock, flags);
+	qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, addr, npages, ih);
+	spin_unlock_irqrestore(&domain->lock, flags);
+}
+
 static void iommu_flush_iotlb_psi(struct intel_iommu *iommu,
 				  struct dmar_domain *domain,
 				  unsigned long pfn, unsigned int pages,
@@ -1484,7 +1496,7 @@ static void iommu_flush_iotlb_psi(struct intel_iommu *iommu,
 		ih = 1 << 6;
 
 	if (domain->use_first_level) {
-		qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, addr, pages, ih);
+		domain_flush_pasid_iotlb(iommu, domain, addr, pages, ih);
 	} else {
 		unsigned long bitmask = aligned_pages - 1;
 
@@ -1554,7 +1566,7 @@ static void intel_flush_iotlb_all(struct iommu_domain *domain)
 		u16 did = domain_id_iommu(dmar_domain, iommu);
 
 		if (dmar_domain->use_first_level)
-			qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, 0, -1, 0);
+			domain_flush_pasid_iotlb(iommu, dmar_domain, 0, -1, 0);
 		else
 			iommu->flush.flush_iotlb(iommu, did, 0, 0,
 						 DMA_TLB_DSI_FLUSH);
-- 
2.25.1

[PATCH v11 4/8] iommu/vt-d: Remove pasid_mutex

[Jacob Pan]

From: Lu Baolu <baolu.lu@linux.intel.com>

The pasid_mutex was used to protect the paths of set/remove_dev_pasid().
It's duplicate with iommu_sva_lock. Remove it to avoid duplicate code.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
---
 drivers/iommu/intel/svm.c | 45 +++++----------------------------------
 1 file changed, 5 insertions(+), 40 deletions(-)

diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index e95b339e9cdc..2a82864e9d57 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -259,8 +259,6 @@ static const struct mmu_notifier_ops intel_mmuops = {
 	.invalidate_range = intel_invalidate_range,
 };
 
-static DEFINE_MUTEX(pasid_mutex);
-
 static int pasid_to_svm_sdev(struct device *dev, unsigned int pasid,
 			     struct intel_svm **rsvm,
 			     struct intel_svm_dev **rsdev)
@@ -268,10 +266,6 @@ static int pasid_to_svm_sdev(struct device *dev, unsigned int pasid,
 	struct intel_svm_dev *sdev = NULL;
 	struct intel_svm *svm;
 
-	/* The caller should hold the pasid_mutex lock */
-	if (WARN_ON(!mutex_is_locked(&pasid_mutex)))
-		return -EINVAL;
-
 	if (pasid == IOMMU_PASID_INVALID || pasid >= PASID_MAX)
 		return -EINVAL;
 
@@ -371,22 +365,19 @@ static int intel_svm_bind_mm(struct intel_iommu *iommu, struct device *dev,
 	return ret;
 }
 
-/* Caller must hold pasid_mutex */
-static int intel_svm_unbind_mm(struct device *dev, u32 pasid)
+void intel_svm_remove_dev_pasid(struct device *dev, u32 pasid)
 {
 	struct intel_svm_dev *sdev;
 	struct intel_iommu *iommu;
 	struct intel_svm *svm;
 	struct mm_struct *mm;
-	int ret = -EINVAL;
 
 	iommu = device_to_iommu(dev, NULL, NULL);
 	if (!iommu)
-		goto out;
+		return;
 
-	ret = pasid_to_svm_sdev(dev, pasid, &svm, &sdev);
-	if (ret)
-		goto out;
+	if (pasid_to_svm_sdev(dev, pasid, &svm, &sdev))
+		return;
 	mm = svm->mm;
 
 	if (sdev) {
@@ -418,8 +409,6 @@ static int intel_svm_unbind_mm(struct device *dev, u32 pasid)
 			kfree(svm);
 		}
 	}
-out:
-	return ret;
 }
 
 /* Page request queue descriptor */
@@ -520,19 +509,7 @@ static void intel_svm_drain_prq(struct device *dev, u32 pasid)
 		goto prq_retry;
 	}
 
-	/*
-	 * A work in IO page fault workqueue may try to lock pasid_mutex now.
-	 * Holding pasid_mutex while waiting in iopf_queue_flush_dev() for
-	 * all works in the workqueue to finish may cause deadlock.
-	 *
-	 * It's unnecessary to hold pasid_mutex in iopf_queue_flush_dev().
-	 * Unlock it to allow the works to be handled while waiting for
-	 * them to finish.
-	 */
-	lockdep_assert_held(&pasid_mutex);
-	mutex_unlock(&pasid_mutex);
 	iopf_queue_flush_dev(dev);
-	mutex_lock(&pasid_mutex);
 
 	/*
 	 * Perform steps described in VT-d spec CH7.10 to drain page
@@ -827,26 +804,14 @@ int intel_svm_page_response(struct device *dev,
 	return ret;
 }
 
-void intel_svm_remove_dev_pasid(struct device *dev, ioasid_t pasid)
-{
-	mutex_lock(&pasid_mutex);
-	intel_svm_unbind_mm(dev, pasid);
-	mutex_unlock(&pasid_mutex);
-}
-
 static int intel_svm_set_dev_pasid(struct iommu_domain *domain,
 				   struct device *dev, ioasid_t pasid)
 {
 	struct device_domain_info *info = dev_iommu_priv_get(dev);
 	struct intel_iommu *iommu = info->iommu;
 	struct mm_struct *mm = domain->mm;
-	int ret;
 
-	mutex_lock(&pasid_mutex);
-	ret = intel_svm_bind_mm(iommu, dev, mm);
-	mutex_unlock(&pasid_mutex);
-
-	return ret;
+	return intel_svm_bind_mm(iommu, dev, mm);
 }
 
 static void intel_svm_domain_free(struct iommu_domain *domain)
-- 
2.25.1

[PATCH v11 5/8] iommu/vt-d: Make prq draining code generic

[Jacob Pan]

From: Lu Baolu <baolu.lu@linux.intel.com>

Currently draining page requests and responses for a pasid is part of SVA
implementation. This is because the driver only supports attaching an SVA
domain to a device pasid. As we are about to support attaching other types
of domains to a device pasid, the prq draining code becomes generic.

Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel/iommu.c | 30 +++++++++++++++++++-----------
 drivers/iommu/intel/iommu.h |  2 ++
 drivers/iommu/intel/svm.c   | 17 ++---------------
 3 files changed, 23 insertions(+), 26 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index bb8316fec1aa..bdde38a5e43a 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4720,21 +4720,29 @@ static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid)
 	struct intel_iommu *iommu = device_to_iommu(dev, NULL, NULL);
 	struct iommu_domain *domain;
 
-	/* Domain type specific cleanup: */
 	domain = iommu_get_domain_for_dev_pasid(dev, pasid, 0);
-	if (domain) {
-		switch (domain->type) {
-		case IOMMU_DOMAIN_SVA:
-			intel_svm_remove_dev_pasid(dev, pasid);
-			break;
-		default:
-			/* should never reach here */
-			WARN_ON(1);
-			break;
-		}
+	if (WARN_ON_ONCE(!domain))
+		goto out_tear_down;
+
+	/*
+	 * The SVA implementation needs to handle its own stuffs like the mm
+	 * notification. Before consolidating that code into iommu core, let
+	 * the intel sva code handle it.
+	 */
+	if (domain->type == IOMMU_DOMAIN_SVA) {
+		intel_svm_remove_dev_pasid(dev, pasid);
+		goto out_tear_down;
 	}
 
+	/*
+	 * Should never reach here until we add support for attaching
+	 * non-SVA domain to a pasid.
+	 */
+	WARN_ON(1);
+
+out_tear_down:
 	intel_pasid_tear_down_entry(iommu, dev, pasid, false);
+	intel_drain_pasid_prq(dev, pasid);
 }
 
 const struct iommu_ops intel_iommu_ops = {
diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h
index 1c5e1d88862b..6d94a29f5d52 100644
--- a/drivers/iommu/intel/iommu.h
+++ b/drivers/iommu/intel/iommu.h
@@ -844,6 +844,7 @@ int intel_svm_page_response(struct device *dev, struct iommu_fault_event *evt,
 			    struct iommu_page_response *msg);
 struct iommu_domain *intel_svm_domain_alloc(void);
 void intel_svm_remove_dev_pasid(struct device *dev, ioasid_t pasid);
+void intel_drain_pasid_prq(struct device *dev, u32 pasid);
 
 struct intel_svm_dev {
 	struct list_head list;
@@ -862,6 +863,7 @@ struct intel_svm {
 };
 #else
 static inline void intel_svm_check(struct intel_iommu *iommu) {}
+static inline void intel_drain_pasid_prq(struct device *dev, u32 pasid) {}
 static inline struct iommu_domain *intel_svm_domain_alloc(void)
 {
 	return NULL;
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 2a82864e9d57..9fbae9af6615 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -26,8 +26,6 @@
 #include "trace.h"
 
 static irqreturn_t prq_event_thread(int irq, void *d);
-static void intel_svm_drain_prq(struct device *dev, u32 pasid);
-#define to_intel_svm_dev(handle) container_of(handle, struct intel_svm_dev, sva)
 
 static DEFINE_XARRAY_ALLOC(pasid_private_array);
 static int pasid_private_add(ioasid_t pasid, void *priv)
@@ -382,17 +380,6 @@ void intel_svm_remove_dev_pasid(struct device *dev, u32 pasid)
 
 	if (sdev) {
 		list_del_rcu(&sdev->list);
-		/*
-		 * Flush the PASID cache and IOTLB for this device.
-		 * Note that we do depend on the hardware *not* using
-		 * the PASID any more. Just as we depend on other
-		 * devices never using PASIDs that they have no right
-		 * to use. We have a *shared* PASID table, because it's
-		 * large and has to be physically contiguous. So it's
-		 * hard to be as defensive as we might like.
-		 */
-		intel_pasid_tear_down_entry(iommu, dev, svm->pasid, false);
-		intel_svm_drain_prq(dev, svm->pasid);
 		kfree_rcu(sdev, rcu);
 
 		if (list_empty(&svm->devs)) {
@@ -449,7 +436,7 @@ static bool is_canonical_address(u64 addr)
 }
 
 /**
- * intel_svm_drain_prq - Drain page requests and responses for a pasid
+ * intel_drain_pasid_prq - Drain page requests and responses for a pasid
  * @dev: target device
  * @pasid: pasid for draining
  *
@@ -463,7 +450,7 @@ static bool is_canonical_address(u64 addr)
  * described in VT-d spec CH7.10 to drain all page requests and page
  * responses pending in the hardware.
  */
-static void intel_svm_drain_prq(struct device *dev, u32 pasid)
+void intel_drain_pasid_prq(struct device *dev, u32 pasid)
 {
 	struct device_domain_info *info;
 	struct dmar_domain *domain;
-- 
2.25.1

[PATCH v11 6/8] iommu/vt-d: Prepare for set_dev_pasid callback

[Jacob Pan]

From: Lu Baolu <baolu.lu@linux.intel.com>

The domain_flush_pasid_iotlb() helper function is used to flush the IOTLB
entries for a given PASID. Previously, this function assumed that
RID2PASID was only used for the first-level DMA translation. However, with
the introduction of the set_dev_pasid callback, this assumption is no
longer valid.

Add a check before using the RID2PASID for PASID invalidation. This check
ensures that the domain has been attached to a physical device before
using RID2PASID.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 drivers/iommu/intel/iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index bdde38a5e43a..4a41aca6a2ba 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1475,7 +1475,8 @@ static void domain_flush_pasid_iotlb(struct intel_iommu *iommu,
 	unsigned long flags;
 
 	spin_lock_irqsave(&domain->lock, flags);
-	qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, addr, npages, ih);
+	if (!list_empty(&domain->devices))
+		qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, addr, npages, ih);
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
-- 
2.25.1

[PATCH v11 7/8] iommu/vt-d: Add set_dev_pasid callback for dma domain

[Jacob Pan]

From: Lu Baolu <baolu.lu@linux.intel.com>

This allows the upper layers to set a domain to a PASID of a device
if the PASID feature is supported by the IOMMU hardware. The typical
use cases are, for example, kernel DMA with PASID and hardware
assisted mediated device drivers.

The attaching device and pasid information is tracked in a per-domain
list and is used for IOTLB and devTLB invalidation.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 drivers/iommu/intel/iommu.c | 104 ++++++++++++++++++++++++++++++++++--
 drivers/iommu/intel/iommu.h |   7 +++
 2 files changed, 106 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 4a41aca6a2ba..f939fc2aa66c 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1359,6 +1359,7 @@ domain_lookup_dev_info(struct dmar_domain *domain,
 
 static void domain_update_iotlb(struct dmar_domain *domain)
 {
+	struct dev_pasid_info *dev_pasid;
 	struct device_domain_info *info;
 	bool has_iotlb_device = false;
 	unsigned long flags;
@@ -1370,6 +1371,14 @@ static void domain_update_iotlb(struct dmar_domain *domain)
 			break;
 		}
 	}
+
+	list_for_each_entry(dev_pasid, &domain->dev_pasids, link_domain) {
+		info = dev_iommu_priv_get(dev_pasid->dev);
+		if (info->ats_enabled) {
+			has_iotlb_device = true;
+			break;
+		}
+	}
 	domain->has_iotlb_device = has_iotlb_device;
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -1455,6 +1464,7 @@ static void __iommu_flush_dev_iotlb(struct device_domain_info *info,
 static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
 				  u64 addr, unsigned mask)
 {
+	struct dev_pasid_info *dev_pasid;
 	struct device_domain_info *info;
 	unsigned long flags;
 
@@ -1464,6 +1474,19 @@ static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
 	spin_lock_irqsave(&domain->lock, flags);
 	list_for_each_entry(info, &domain->devices, link)
 		__iommu_flush_dev_iotlb(info, addr, mask);
+
+	list_for_each_entry(dev_pasid, &domain->dev_pasids, link_domain) {
+		info = dev_iommu_priv_get(dev_pasid->dev);
+
+		if (!info->ats_enabled)
+			continue;
+
+		qi_flush_dev_iotlb_pasid(info->iommu,
+					 PCI_DEVID(info->bus, info->devfn),
+					 info->pfsid, dev_pasid->pasid,
+					 info->ats_qdep, addr,
+					 mask);
+	}
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
@@ -1472,9 +1495,13 @@ static void domain_flush_pasid_iotlb(struct intel_iommu *iommu,
 				     unsigned long npages, bool ih)
 {
 	u16 did = domain_id_iommu(domain, iommu);
+	struct dev_pasid_info *dev_pasid;
 	unsigned long flags;
 
 	spin_lock_irqsave(&domain->lock, flags);
+	list_for_each_entry(dev_pasid, &domain->dev_pasids, link_domain)
+		qi_flush_piotlb(iommu, did, dev_pasid->pasid, addr, npages, ih);
+
 	if (!list_empty(&domain->devices))
 		qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, addr, npages, ih);
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1739,6 +1766,7 @@ static struct dmar_domain *alloc_domain(unsigned int type)
 		domain->use_first_level = true;
 	domain->has_iotlb_device = false;
 	INIT_LIST_HEAD(&domain->devices);
+	INIT_LIST_HEAD(&domain->dev_pasids);
 	spin_lock_init(&domain->lock);
 	xa_init(&domain->iommu_array);
 
@@ -4719,7 +4747,10 @@ static void intel_iommu_iotlb_sync_map(struct iommu_domain *domain,
 static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid)
 {
 	struct intel_iommu *iommu = device_to_iommu(dev, NULL, NULL);
+	struct dev_pasid_info *curr, *dev_pasid = NULL;
+	struct dmar_domain *dmar_domain;
 	struct iommu_domain *domain;
+	unsigned long flags;
 
 	domain = iommu_get_domain_for_dev_pasid(dev, pasid, 0);
 	if (WARN_ON_ONCE(!domain))
@@ -4735,17 +4766,79 @@ static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid)
 		goto out_tear_down;
 	}
 
-	/*
-	 * Should never reach here until we add support for attaching
-	 * non-SVA domain to a pasid.
-	 */
-	WARN_ON(1);
+	dmar_domain = to_dmar_domain(domain);
+	spin_lock_irqsave(&dmar_domain->lock, flags);
+	list_for_each_entry(curr, &dmar_domain->dev_pasids, link_domain) {
+		if (curr->dev == dev && curr->pasid == pasid) {
+			list_del(&curr->link_domain);
+			dev_pasid = curr;
+			break;
+		}
+	}
+	WARN_ON_ONCE(!dev_pasid);
+	spin_unlock_irqrestore(&dmar_domain->lock, flags);
 
+	domain_detach_iommu(dmar_domain, iommu);
+	kfree(dev_pasid);
 out_tear_down:
 	intel_pasid_tear_down_entry(iommu, dev, pasid, false);
 	intel_drain_pasid_prq(dev, pasid);
 }
 
+static int intel_iommu_set_dev_pasid(struct iommu_domain *domain,
+				     struct device *dev, ioasid_t pasid)
+{
+	struct device_domain_info *info = dev_iommu_priv_get(dev);
+	struct dmar_domain *dmar_domain = to_dmar_domain(domain);
+	struct intel_iommu *iommu = info->iommu;
+	struct dev_pasid_info *dev_pasid;
+	unsigned long flags;
+	int ret;
+
+	if (!pasid_supported(iommu) || dev_is_real_dma_subdevice(dev))
+		return -EOPNOTSUPP;
+
+	if (context_copied(iommu, info->bus, info->devfn))
+		return -EBUSY;
+
+	ret = prepare_domain_attach_device(domain, dev);
+	if (ret)
+		return ret;
+
+	dev_pasid = kzalloc(sizeof(*dev_pasid), GFP_KERNEL);
+	if (!dev_pasid)
+		return -ENOMEM;
+
+	ret = domain_attach_iommu(dmar_domain, iommu);
+	if (ret)
+		goto out_free;
+
+	if (domain_type_is_si(dmar_domain))
+		ret = intel_pasid_setup_pass_through(iommu, dmar_domain,
+						     dev, pasid);
+	else if (dmar_domain->use_first_level)
+		ret = domain_setup_first_level(iommu, dmar_domain,
+					       dev, pasid);
+	else
+		ret = intel_pasid_setup_second_level(iommu, dmar_domain,
+						     dev, pasid);
+	if (ret)
+		goto out_detach_iommu;
+
+	dev_pasid->dev = dev;
+	dev_pasid->pasid = pasid;
+	spin_lock_irqsave(&dmar_domain->lock, flags);
+	list_add(&dev_pasid->link_domain, &dmar_domain->dev_pasids);
+	spin_unlock_irqrestore(&dmar_domain->lock, flags);
+
+	return 0;
+out_detach_iommu:
+	domain_detach_iommu(dmar_domain, iommu);
+out_free:
+	kfree(dev_pasid);
+	return ret;
+}
+
 const struct iommu_ops intel_iommu_ops = {
 	.capable		= intel_iommu_capable,
 	.domain_alloc		= intel_iommu_domain_alloc,
@@ -4765,6 +4858,7 @@ const struct iommu_ops intel_iommu_ops = {
 #endif
 	.default_domain_ops = &(const struct iommu_domain_ops) {
 		.attach_dev		= intel_iommu_attach_device,
+		.set_dev_pasid		= intel_iommu_set_dev_pasid,
 		.map_pages		= intel_iommu_map_pages,
 		.unmap_pages		= intel_iommu_unmap_pages,
 		.iotlb_sync_map		= intel_iommu_iotlb_sync_map,
diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h
index 6d94a29f5d52..c18fb699c87a 100644
--- a/drivers/iommu/intel/iommu.h
+++ b/drivers/iommu/intel/iommu.h
@@ -595,6 +595,7 @@ struct dmar_domain {
 
 	spinlock_t lock;		/* Protect device tracking lists */
 	struct list_head devices;	/* all devices' list */
+	struct list_head dev_pasids;	/* all attached pasids */
 
 	struct dma_pte	*pgd;		/* virtual address */
 	int		gaw;		/* max guest address width */
@@ -717,6 +718,12 @@ struct device_domain_info {
 	struct pasid_table *pasid_table; /* pasid table */
 };
 
+struct dev_pasid_info {
+	struct list_head link_domain;	/* link to domain siblings */
+	struct device *dev;
+	ioasid_t pasid;
+};
+
 static inline void __iommu_flush_cache(
 	struct intel_iommu *iommu, void *addr, int size)
 {
-- 
2.25.1

[PATCH v11 8/8] dmaengine/idxd: Re-enable kernel workqueue under DMA API

[Jacob Pan]

Kernel workqueues were disabled due to flawed use of kernel VA and SVA
API. Now that we have the support for attaching PASID to the device's
default domain and the ability to reserve global PASIDs from SVA APIs,
we can re-enable the kernel work queues and use them under DMA API.

We also use non-privileged access for in-kernel DMA to be consistent
with the IOMMU settings. Consequently, interrupt for user privilege is
enabled for work completion IRQs.

Link:https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
Tested-by: Tony Zhu <tony.zhu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
v9: Set user IRQ enable when device is enabled for system PASID
---
 drivers/dma/idxd/device.c | 39 ++++++++++------------------
 drivers/dma/idxd/dma.c    |  5 ++--
 drivers/dma/idxd/idxd.h   |  9 +++++++
 drivers/dma/idxd/init.c   | 54 ++++++++++++++++++++++++++++++++++++---
 drivers/dma/idxd/sysfs.c  |  7 -----
 5 files changed, 76 insertions(+), 38 deletions(-)

diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 5abbcc61c528..169b7ade8919 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -299,21 +299,6 @@ void idxd_wqs_unmap_portal(struct idxd_device *idxd)
 	}
 }
 
-static void __idxd_wq_set_priv_locked(struct idxd_wq *wq, int priv)
-{
-	struct idxd_device *idxd = wq->idxd;
-	union wqcfg wqcfg;
-	unsigned int offset;
-
-	offset = WQCFG_OFFSET(idxd, wq->id, WQCFG_PRIVL_IDX);
-	spin_lock(&idxd->dev_lock);
-	wqcfg.bits[WQCFG_PRIVL_IDX] = ioread32(idxd->reg_base + offset);
-	wqcfg.priv = priv;
-	wq->wqcfg->bits[WQCFG_PRIVL_IDX] = wqcfg.bits[WQCFG_PRIVL_IDX];
-	iowrite32(wqcfg.bits[WQCFG_PRIVL_IDX], idxd->reg_base + offset);
-	spin_unlock(&idxd->dev_lock);
-}
-
 static void __idxd_wq_set_pasid_locked(struct idxd_wq *wq, int pasid)
 {
 	struct idxd_device *idxd = wq->idxd;
@@ -1423,15 +1408,14 @@ int drv_enable_wq(struct idxd_wq *wq)
 	}
 
 	/*
-	 * In the event that the WQ is configurable for pasid and priv bits.
-	 * For kernel wq, the driver should setup the pasid, pasid_en, and priv bit.
-	 * However, for non-kernel wq, the driver should only set the pasid_en bit for
-	 * shared wq. A dedicated wq that is not 'kernel' type will configure pasid and
+	 * In the event that the WQ is configurable for pasid, the driver
+	 * should setup the pasid, pasid_en bit. This is true for both kernel
+	 * and user shared workqueues. There is no need to setup priv bit in
+	 * that in-kernel DMA will also do user privileged requests.
+	 * A dedicated wq that is not 'kernel' type will configure pasid and
 	 * pasid_en later on so there is no need to setup.
 	 */
 	if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags)) {
-		int priv = 0;
-
 		if (wq_pasid_enabled(wq)) {
 			if (is_idxd_wq_kernel(wq) || wq_shared(wq)) {
 				u32 pasid = wq_dedicated(wq) ? idxd->pasid : 0;
@@ -1439,10 +1423,6 @@ int drv_enable_wq(struct idxd_wq *wq)
 				__idxd_wq_set_pasid_locked(wq, pasid);
 			}
 		}
-
-		if (is_idxd_wq_kernel(wq))
-			priv = 1;
-		__idxd_wq_set_priv_locked(wq, priv);
 	}
 
 	rc = 0;
@@ -1550,6 +1530,15 @@ int idxd_device_drv_probe(struct idxd_dev *idxd_dev)
 	if (rc < 0)
 		return -ENXIO;
 
+	/*
+	 * System PASID is preserved across device disable/enable cycle, but
+	 * genconfig register content gets cleared during device reset. We
+	 * need to re-enable user interrupts for kernel work queue completion
+	 * IRQ to function.
+	 */
+	if (idxd->pasid != IOMMU_PASID_INVALID)
+		idxd_set_user_intr(idxd, 1);
+
 	rc = idxd_device_evl_setup(idxd);
 	if (rc < 0) {
 		idxd->cmd_status = IDXD_SCMD_DEV_EVL_ERR;
diff --git a/drivers/dma/idxd/dma.c b/drivers/dma/idxd/dma.c
index eb35ca313684..07623fb0f52f 100644
--- a/drivers/dma/idxd/dma.c
+++ b/drivers/dma/idxd/dma.c
@@ -75,9 +75,10 @@ static inline void idxd_prep_desc_common(struct idxd_wq *wq,
 	hw->xfer_size = len;
 	/*
 	 * For dedicated WQ, this field is ignored and HW will use the WQCFG.priv
-	 * field instead. This field should be set to 1 for kernel descriptors.
+	 * field instead. This field should be set to 0 for kernel descriptors
+	 * since kernel DMA on VT-d supports "user" privilege only.
 	 */
-	hw->priv = 1;
+	hw->priv = 0;
 	hw->completion_addr = compl;
 }
 
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index 5428a2e1b1ec..502be9db63f4 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -473,6 +473,15 @@ static inline struct idxd_device *ie_to_idxd(struct idxd_irq_entry *ie)
 	return container_of(ie, struct idxd_device, ie);
 }
 
+static inline void idxd_set_user_intr(struct idxd_device *idxd, bool enable)
+{
+	union gencfg_reg reg;
+
+	reg.bits = ioread32(idxd->reg_base + IDXD_GENCFG_OFFSET);
+	reg.user_int_en = enable;
+	iowrite32(reg.bits, idxd->reg_base + IDXD_GENCFG_OFFSET);
+}
+
 extern struct bus_type dsa_bus_type;
 
 extern bool support_enqcmd;
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index 1aa823974cda..0eb1c827a215 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -550,14 +550,59 @@ static struct idxd_device *idxd_alloc(struct pci_dev *pdev, struct idxd_driver_d
 
 static int idxd_enable_system_pasid(struct idxd_device *idxd)
 {
-	return -EOPNOTSUPP;
+	struct pci_dev *pdev = idxd->pdev;
+	struct device *dev = &pdev->dev;
+	struct iommu_domain *domain;
+	ioasid_t pasid;
+	int ret;
+
+	/*
+	 * Attach a global PASID to the DMA domain so that we can use ENQCMDS
+	 * to submit work on buffers mapped by DMA API.
+	 */
+	domain = iommu_get_domain_for_dev(dev);
+	if (!domain)
+		return -EPERM;
+
+	pasid = iommu_alloc_global_pasid(dev);
+	if (pasid == IOMMU_PASID_INVALID)
+		return -ENOSPC;
+
+	/*
+	 * DMA domain is owned by the driver, it should support all valid
+	 * types such as DMA-FQ, identity, etc.
+	 */
+	ret = iommu_attach_device_pasid(domain, dev, pasid);
+	if (ret) {
+		dev_err(dev, "failed to attach device pasid %d, domain type %d",
+			pasid, domain->type);
+		iommu_free_global_pasid(pasid);
+		return ret;
+	}
+
+	/* Since we set user privilege for kernel DMA, enable completion IRQ */
+	idxd_set_user_intr(idxd, 1);
+	idxd->pasid = pasid;
+
+	return ret;
 }
 
 static void idxd_disable_system_pasid(struct idxd_device *idxd)
 {
+	struct pci_dev *pdev = idxd->pdev;
+	struct device *dev = &pdev->dev;
+	struct iommu_domain *domain;
+
+	domain = iommu_get_domain_for_dev(dev);
+	if (!domain)
+		return;
+
+	iommu_detach_device_pasid(domain, dev, idxd->pasid);
+	iommu_free_global_pasid(idxd->pasid);
 
-	iommu_sva_unbind_device(idxd->sva);
+	idxd_set_user_intr(idxd, 0);
 	idxd->sva = NULL;
+	idxd->pasid = IOMMU_PASID_INVALID;
 }
 
 static int idxd_enable_sva(struct pci_dev *pdev)
@@ -600,8 +645,9 @@ static int idxd_probe(struct idxd_device *idxd)
 		} else {
 			set_bit(IDXD_FLAG_USER_PASID_ENABLED, &idxd->flags);
 
-			if (idxd_enable_system_pasid(idxd))
-				dev_warn(dev, "No in-kernel DMA with PASID.\n");
+			rc = idxd_enable_system_pasid(idxd);
+			if (rc)
+				dev_warn(dev, "No in-kernel DMA with PASID. %d\n", rc);
 			else
 				set_bit(IDXD_FLAG_PASID_ENABLED, &idxd->flags);
 		}
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 293739ac5596..63f6966c51aa 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -948,13 +948,6 @@ static ssize_t wq_name_store(struct device *dev,
 	if (strlen(buf) > WQ_NAME_SIZE || strlen(buf) == 0)
 		return -EINVAL;
 
-	/*
-	 * This is temporarily placed here until we have SVM support for
-	 * dmaengine.
-	 */
-	if (wq->type == IDXD_WQT_KERNEL && device_pasid_enabled(wq->idxd))
-		return -EOPNOTSUPP;
-
 	input = kstrndup(buf, count, GFP_KERNEL);
 	if (!input)
 		return -ENOMEM;
-- 
2.25.1

RE: [PATCH v11 5/8] iommu/vt-d: Make prq draining code generic

[Tian, Kevin]

> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Sent: Tuesday, July 25, 2023 6:26 AM
> 
> From: Lu Baolu <baolu.lu@linux.intel.com>
> 
> Currently draining page requests and responses for a pasid is part of SVA
> implementation. This is because the driver only supports attaching an SVA
> domain to a device pasid. As we are about to support attaching other types
> of domains to a device pasid, the prq draining code becomes generic.
> 
> Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>

Reviewed-by: Kevin Tian <kevin.tian@intel.com>

RE: [PATCH v11 6/8] iommu/vt-d: Prepare for set_dev_pasid callback

[Tian, Kevin]

> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Sent: Tuesday, July 25, 2023 6:26 AM
> 
> From: Lu Baolu <baolu.lu@linux.intel.com>
> 
> The domain_flush_pasid_iotlb() helper function is used to flush the IOTLB
> entries for a given PASID. Previously, this function assumed that
> RID2PASID was only used for the first-level DMA translation. However, with
> the introduction of the set_dev_pasid callback, this assumption is no
> longer valid.
> 
> Add a check before using the RID2PASID for PASID invalidation. This check
> ensures that the domain has been attached to a physical device before
> using RID2PASID.
> 
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>

Reviewed-by: Kevin Tian <kevin.tian@intel.com>

RE: [PATCH v11 7/8] iommu/vt-d: Add set_dev_pasid callback for dma domain

[Tian, Kevin]

> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Sent: Tuesday, July 25, 2023 6:26 AM
> 
> From: Lu Baolu <baolu.lu@linux.intel.com>
> 
> This allows the upper layers to set a domain to a PASID of a device
> if the PASID feature is supported by the IOMMU hardware. The typical
> use cases are, for example, kernel DMA with PASID and hardware
> assisted mediated device drivers.
> 
> The attaching device and pasid information is tracked in a per-domain
> list and is used for IOTLB and devTLB invalidation.
> 
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>

Reviewed-by: Kevin Tian <kevin.tian@intel.com>

Re: [PATCH v11 2/8] iommu: Move global PASID allocation from SVA to core

[Jason Gunthorpe]

On Mon, Jul 24, 2023 at 03:25:32PM -0700, Jacob Pan wrote:
> Global PASID can be used beyond SVA. For example, drivers that use
> Intel ENQCMD to submit work must use global PASIDs in that PASID
> is stored in a per CPU MSR. When such device need to submit work
> for in-kernel DMA with PASID, it must allocate PASIDs from the same
> global number space to avoid conflict.

This is a bit misleading, maybe:

==
Intel ENQCMD requires a single PASID to be shared between multiple
devices, as the PASID is stored in a single MSR register per-process
and userspace can use only that one PASID.

This means that the PASID allocation for any ENQCMD using device driver
must always come from a shared global pool, regardless of what kind of
domain the PASID will be used with.

Split the code for the global PASID allocator into
iommu_alloc/free_global_pasid() so that drivers can attach non-SVA
domains to PASIDs as well.
==

The code looks fine, though I would eventually like to see the SVA
code not hardwired to the global allocator too :\

Jason

Re: [PATCH v11 8/8] dmaengine/idxd: Re-enable kernel workqueue under DMA API

[Jason Gunthorpe]

On Mon, Jul 24, 2023 at 03:25:38PM -0700, Jacob Pan wrote:
> Kernel workqueues were disabled due to flawed use of kernel VA and SVA
> API. Now that we have the support for attaching PASID to the device's
> default domain and the ability to reserve global PASIDs from SVA APIs,
> we can re-enable the kernel work queues and use them under DMA API.
> 
> We also use non-privileged access for in-kernel DMA to be consistent
> with the IOMMU settings. Consequently, interrupt for user privilege is
> enabled for work completion IRQs.
> 
> Link:https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
> Tested-by: Tony Zhu <tony.zhu@intel.com>
> Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
> Acked-by: Vinod Koul <vkoul@kernel.org>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> ---
> v9: Set user IRQ enable when device is enabled for system PASID
> ---
>  drivers/dma/idxd/device.c | 39 ++++++++++------------------
>  drivers/dma/idxd/dma.c    |  5 ++--
>  drivers/dma/idxd/idxd.h   |  9 +++++++
>  drivers/dma/idxd/init.c   | 54 ++++++++++++++++++++++++++++++++++++---
>  drivers/dma/idxd/sysfs.c  |  7 -----
>  5 files changed, 76 insertions(+), 38 deletions(-)

Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>

Jason

Re: [PATCH v11 0/8] Re-enable IDXD kernel workqueue under DMA API

[Jason Gunthorpe]

On Mon, Jul 24, 2023 at 03:25:30PM -0700, Jacob Pan wrote:
> Hi Joerg and all,
> 
> IDXD kernel work queues were disabled due to the flawed use of kernel VA
> and SVA API.
> Link: https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
> 
> The solution is to enable it under DMA API where IDXD shared workqueue users
> can use ENQCMDS to submit work on buffers mapped by DMA API.
> 
> This patchset adds support for attaching PASID to the device's default
> domain and the ability to allocate global PASIDs from IOMMU APIs. IDXD driver
> can then re-enable the kernel work queues and use them under DMA API.
> 
> This depends on the IOASID removal series. (merged)
> https://lore.kernel.org/all/ZCaUBJvUMsJyD7EW@8bytes.org/

If the vt-d driver bits are fine I think this series is OK

Thanks,
Jason

Re: [PATCH v11 0/8] Re-enable IDXD kernel workqueue under DMA API

[Jacob Pan]

Hi Joerg/Baolu,

Any more comments on this series? Thanks

On Mon, 24 Jul 2023 15:25:30 -0700, Jacob Pan
<jacob.jun.pan@linux.intel.com> wrote:

> Hi Joerg and all,
> 
> IDXD kernel work queues were disabled due to the flawed use of kernel VA
> and SVA API.
> Link:
> https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
> 
> The solution is to enable it under DMA API where IDXD shared workqueue
> users can use ENQCMDS to submit work on buffers mapped by DMA API.
> 
> This patchset adds support for attaching PASID to the device's default
> domain and the ability to allocate global PASIDs from IOMMU APIs. IDXD
> driver can then re-enable the kernel work queues and use them under DMA
> API.
> 
> This depends on the IOASID removal series. (merged)
> https://lore.kernel.org/all/ZCaUBJvUMsJyD7EW@8bytes.org/
> 
> 
> Thanks,
> 
> Jacob
> 
> ---
> Changelog:
> v11:
> 	- Rebased onto Joerg's next tree (v6.5-rc1)
> 	- Split RIDPASID check in invalidation code into patch (6/8)
> 	- Renamed iommu_alloc_global_pasid_dev to
> iommu_alloc_global_pasid (2/8)
> 	- Added WARN_ON if no dev_pasid is found during remove (7/8)
> v10:
> 	- Fix global PASID alloc function with device's max_pasid=0
> v9:
> 	- Fix an IDXD driver issue where user interrupt enable bit got
> cleared during device enable/disable cycle. Reported and tested by
> 	  Tony Zhu <tony.zhu@intel.com>
> 	- Rebased to v6.4-rc7
> v8:
> 	- further vt-d driver refactoring (3-6) around set/remove device
> PASID (Baolu)
> 	- make consistent use of NO_PASID in SMMU code (Jean)
> 	- fix off-by-one error in max PASID check (Kevin)
> v7:
> 	- renamed IOMMU_DEF_RID_PASID to be IOMMU_NO_PASID to be more
> generic (Jean)
> 	- simplify range checking for sva PASID (Baolu) 
> v6:
> 	- use a simplified version of vt-d driver change for
> set_device_pasid from Baolu.
> 	- check and rename global PASID allocation base
> v5:
> 	- exclude two patches related to supervisor mode, taken by VT-d
> 	maintainer Baolu.
> 	- move PASID range check into allocation API so that device
> drivers only need to pass in struct device*. (Kevin)
> 	- factor out helper functions in device-domain attach (Baolu)
> 	- make explicit use of RID_PASID across architectures
> v4:
> 	- move dummy functions outside ifdef CONFIG_IOMMU_SVA (Baolu)
> 	- dropped domain type check while disabling idxd system PASID
> (Baolu)
> 
> v3:
> 	- moved global PASID allocation API from SVA to IOMMU (Kevin)
> 	- remove #ifdef around global PASID reservation during boot
> (Baolu)
> 	- remove restriction on PASID 0 allocation (Baolu)
> 	- fix a bug in sysfs domain change when attaching devices
> 	- clear idxd user interrupt enable bit after disabling device(
> Fenghua) v2:
> 	- refactored device PASID attach domain ops based on Baolu's
> early patch
> 	- addressed TLB flush gap
> 	- explicitly reserve RID_PASID from SVA PASID number space
> 	- get dma domain directly, avoid checking domain types
> 
> 
> 
> Jacob Pan (3):
>   iommu: Generalize PASID 0 for normal DMA w/o PASID
>   iommu: Move global PASID allocation from SVA to core
>   dmaengine/idxd: Re-enable kernel workqueue under DMA API
> 
> Lu Baolu (5):
>   iommu/vt-d: Add domain_flush_pasid_iotlb()
>   iommu/vt-d: Remove pasid_mutex
>   iommu/vt-d: Make prq draining code generic
>   iommu/vt-d: Prepare for set_dev_pasid callback
>   iommu/vt-d: Add set_dev_pasid callback for dma domain
> 
>  drivers/dma/idxd/device.c                     |  39 ++---
>  drivers/dma/idxd/dma.c                        |   5 +-
>  drivers/dma/idxd/idxd.h                       |   9 +
>  drivers/dma/idxd/init.c                       |  54 +++++-
>  drivers/dma/idxd/sysfs.c                      |   7 -
>  .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   |   2 +-
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   |  16 +-
>  drivers/iommu/intel/iommu.c                   | 157 +++++++++++++++---
>  drivers/iommu/intel/iommu.h                   |   9 +
>  drivers/iommu/intel/pasid.c                   |   2 +-
>  drivers/iommu/intel/pasid.h                   |   2 -
>  drivers/iommu/intel/svm.c                     |  62 +------
>  drivers/iommu/iommu-sva.c                     |  29 ++--
>  drivers/iommu/iommu.c                         |  28 ++++
>  include/linux/iommu.h                         |  11 ++
>  15 files changed, 287 insertions(+), 145 deletions(-)
> 


Thanks,

Jacob

Re: [PATCH v11 2/8] iommu: Move global PASID allocation from SVA to core

[Jacob Pan]

Hi Jason,

On Wed, 2 Aug 2023 11:48:15 -0300, Jason Gunthorpe <jgg@nvidia.com> wrote:

> On Mon, Jul 24, 2023 at 03:25:32PM -0700, Jacob Pan wrote:
> > Global PASID can be used beyond SVA. For example, drivers that use
> > Intel ENQCMD to submit work must use global PASIDs in that PASID
> > is stored in a per CPU MSR. When such device need to submit work
> > for in-kernel DMA with PASID, it must allocate PASIDs from the same
> > global number space to avoid conflict.  
> 
> This is a bit misleading, maybe:
> 
> ==
> Intel ENQCMD requires a single PASID to be shared between multiple
> devices, as the PASID is stored in a single MSR register per-process
> and userspace can use only that one PASID.
> 
> This means that the PASID allocation for any ENQCMD using device driver
> must always come from a shared global pool, regardless of what kind of
> domain the PASID will be used with.
> 
> Split the code for the global PASID allocator into
> iommu_alloc/free_global_pasid() so that drivers can attach non-SVA
> domains to PASIDs as well.
> ==
Much better. Let me update.

Thanks,

Jacob