[PATCH v8 0/6] Add support for the whole MCP39xx family

[PATCH v8 0/6] Add support for the whole MCP39xx family

[Marcus Folkesson]

The main goal with this patchset is to add support for all similar
MCP39xx ADC chips.
During all patch iterations we ended up with a few cleanup patches.

See version notes in each patch.

Marcus Folkesson (6):
  dt-bindings: iio: adc: mcp3911: add support for the whole MCP39xx
    family
  iio: adc: mcp3911: make use of dev_err_probe()
  iio: adc: mcp3911: simplify usage of spi->dev
  iio: adc: mcp3911: fix indentation
  iio: adc: mcp3911: avoid ambiguity parameters in macros
  iio: adc: mcp3911: add support for the whole MCP39xx family

 .../bindings/iio/adc/microchip,mcp3911.yaml   |   6 +
 drivers/iio/adc/Kconfig                       |   6 +-
 drivers/iio/adc/mcp3911.c                     | 562 ++++++++++++++----
 3 files changed, 462 insertions(+), 112 deletions(-)


base-commit: b320441c04c9bea76cbee1196ae55c20288fd7a6
-- 
2.41.0

[PATCH v8 1/6] dt-bindings: iio: adc: mcp3911: add support for the whole MCP39xx family

[Marcus Folkesson]

Microchip does have many similar chips, add those to the compatible
string as the driver support is extended.

The new supported chips are:
  - microchip,mcp3910
  - microchip,mcp3912
  - microchip,mcp3913
  - microchip,mcp3914
  - microchip,mcp3918
  - microchip,mcp3919

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---

Notes:
    v2:
        - No changes
    v3:
        - No changes
    v4:
        - No changes
    v5:
        - No changes
    v6:
        - No changes
    v7:
        - No changes
    v8:
        - No changes

 .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml      | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index f7b3fde4115a..06951ec5f5da 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -18,7 +18,13 @@ description: |
 properties:
   compatible:
     enum:
+      - microchip,mcp3910
       - microchip,mcp3911
+      - microchip,mcp3912
+      - microchip,mcp3913
+      - microchip,mcp3914
+      - microchip,mcp3918
+      - microchip,mcp3919
 
   reg:
     maxItems: 1
-- 
2.41.0

[PATCH v8 2/6] iio: adc: mcp3911: make use of dev_err_probe()

[Marcus Folkesson]

Simplify code by switch to dev_err_probe().

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---

Notes:
    v5:
        - New patch in this series
    v6:
        - fix xmas tree order
    v7:
        - use dev_err_probe for config and scale function as well
    v8:
        - No changes

 drivers/iio/adc/mcp3911.c | 23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index 974c5bd923a6..7fb3ab4a4256 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -277,10 +277,7 @@ static int mcp3911_calc_scale_table(struct mcp3911 *adc)
 	if (adc->vref) {
 		ret = regulator_get_voltage(adc->vref);
 		if (ret < 0) {
-			dev_err(&adc->spi->dev,
-				"failed to get vref voltage: %d\n",
-			       ret);
-			return ret;
+			return dev_err_probe(&adc->spi->dev, ret, "failed to get vref voltage\n");
 		}
 
 		ref = ret / 1000;
@@ -396,10 +393,9 @@ static int mcp3911_config(struct mcp3911 *adc)
 	if (ret)
 		device_property_read_u32(dev, "device-addr", &adc->dev_addr);
 	if (adc->dev_addr > 3) {
-		dev_err(&adc->spi->dev,
-			"invalid device address (%i). Must be in range 0-3.\n",
-			adc->dev_addr);
-		return -EINVAL;
+		return dev_err_probe(dev, -EINVAL,
+				     "invalid device address (%i). Must be in range 0-3.\n",
+				     adc->dev_addr);
 	}
 	dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr);
 
@@ -466,6 +462,7 @@ static const struct iio_trigger_ops mcp3911_trigger_ops = {
 
 static int mcp3911_probe(struct spi_device *spi)
 {
+	struct device *dev = &spi->dev;
 	struct iio_dev *indio_dev;
 	struct mcp3911 *adc;
 	int ret;
@@ -482,10 +479,7 @@ static int mcp3911_probe(struct spi_device *spi)
 		if (PTR_ERR(adc->vref) == -ENODEV) {
 			adc->vref = NULL;
 		} else {
-			dev_err(&adc->spi->dev,
-				"failed to get regulator (%ld)\n",
-				PTR_ERR(adc->vref));
-			return PTR_ERR(adc->vref);
+			return dev_err_probe(dev, PTR_ERR(adc->vref), "failed to get regulator\n");
 		}
 
 	} else {
@@ -504,10 +498,7 @@ static int mcp3911_probe(struct spi_device *spi)
 		if (PTR_ERR(adc->clki) == -ENOENT) {
 			adc->clki = NULL;
 		} else {
-			dev_err(&adc->spi->dev,
-				"failed to get adc clk (%ld)\n",
-				PTR_ERR(adc->clki));
-			return PTR_ERR(adc->clki);
+			return dev_err_probe(dev, PTR_ERR(adc->clki), "failed to get adc clk\n");
 		}
 	}
 
-- 
2.41.0

[PATCH v8 3/6] iio: adc: mcp3911: simplify usage of spi->dev

[Marcus Folkesson]

Replace the usage of `adc->spi->dev` with `dev` to make the code prettier.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---

Notes:
    v4:
        - New patch in this series
    v5:
        - Introduce `struct device *dev` to more functions
    v6:
        - cosmetics
    v7:
        - compress some calls to two lines
    v8:
        - No changes

 drivers/iio/adc/mcp3911.c | 50 ++++++++++++++++++---------------------
 1 file changed, 23 insertions(+), 27 deletions(-)

diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index 7fb3ab4a4256..31ee8d7f81de 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -269,6 +269,7 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 
 static int mcp3911_calc_scale_table(struct mcp3911 *adc)
 {
+	struct device *dev = &adc->spi->dev;
 	u32 ref = MCP3911_INT_VREF_MV;
 	u32 div;
 	int ret;
@@ -277,7 +278,7 @@ static int mcp3911_calc_scale_table(struct mcp3911 *adc)
 	if (adc->vref) {
 		ret = regulator_get_voltage(adc->vref);
 		if (ret < 0) {
-			return dev_err_probe(&adc->spi->dev, ret, "failed to get vref voltage\n");
+			return dev_err_probe(dev, ret, "failed to get vref voltage\n");
 		}
 
 		ref = ret / 1000;
@@ -334,6 +335,7 @@ static irqreturn_t mcp3911_trigger_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct mcp3911 *adc = iio_priv(indio_dev);
+	struct device *dev = &adc->spi->dev;
 	struct spi_transfer xfer[] = {
 		{
 			.tx_buf = &adc->tx_buf,
@@ -351,8 +353,7 @@ static irqreturn_t mcp3911_trigger_handler(int irq, void *p)
 	adc->tx_buf = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr);
 	ret = spi_sync_transfer(adc->spi, xfer, ARRAY_SIZE(xfer));
 	if (ret < 0) {
-		dev_warn(&adc->spi->dev,
-				"failed to get conversion data\n");
+		dev_warn(dev, "failed to get conversion data\n");
 		goto out;
 	}
 
@@ -397,7 +398,7 @@ static int mcp3911_config(struct mcp3911 *adc)
 				     "invalid device address (%i). Must be in range 0-3.\n",
 				     adc->dev_addr);
 	}
-	dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr);
+	dev_dbg(dev, "use device address %i\n", adc->dev_addr);
 
 	ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &regval, 2);
 	if (ret)
@@ -405,21 +406,19 @@ static int mcp3911_config(struct mcp3911 *adc)
 
 	regval &= ~MCP3911_CONFIG_VREFEXT;
 	if (adc->vref) {
-		dev_dbg(&adc->spi->dev, "use external voltage reference\n");
+		dev_dbg(dev, "use external voltage reference\n");
 		regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 1);
 	} else {
-		dev_dbg(&adc->spi->dev,
-			"use internal voltage reference (1.2V)\n");
+		dev_dbg(dev, "use internal voltage reference (1.2V)\n");
 		regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 0);
 	}
 
 	regval &= ~MCP3911_CONFIG_CLKEXT;
 	if (adc->clki) {
-		dev_dbg(&adc->spi->dev, "use external clock as clocksource\n");
+		dev_dbg(dev, "use external clock as clocksource\n");
 		regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 1);
 	} else {
-		dev_dbg(&adc->spi->dev,
-			"use crystal oscillator as clocksource\n");
+		dev_dbg(dev, "use crystal oscillator as clocksource\n");
 		regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 0);
 	}
 
@@ -467,14 +466,14 @@ static int mcp3911_probe(struct spi_device *spi)
 	struct mcp3911 *adc;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	adc = iio_priv(indio_dev);
 	adc->spi = spi;
 
-	adc->vref = devm_regulator_get_optional(&adc->spi->dev, "vref");
+	adc->vref = devm_regulator_get_optional(dev, "vref");
 	if (IS_ERR(adc->vref)) {
 		if (PTR_ERR(adc->vref) == -ENODEV) {
 			adc->vref = NULL;
@@ -487,13 +486,12 @@ static int mcp3911_probe(struct spi_device *spi)
 		if (ret)
 			return ret;
 
-		ret = devm_add_action_or_reset(&spi->dev,
-				mcp3911_cleanup_regulator, adc->vref);
+		ret = devm_add_action_or_reset(dev, mcp3911_cleanup_regulator, adc->vref);
 		if (ret)
 			return ret;
 	}
 
-	adc->clki = devm_clk_get_enabled(&adc->spi->dev, NULL);
+	adc->clki = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(adc->clki)) {
 		if (PTR_ERR(adc->clki) == -ENOENT) {
 			adc->clki = NULL;
@@ -506,7 +504,7 @@ static int mcp3911_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz"))
+	if (device_property_read_bool(dev, "microchip,data-ready-hiz"))
 		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
 				0, 2);
 	else
@@ -540,15 +538,14 @@ static int mcp3911_probe(struct spi_device *spi)
 	mutex_init(&adc->lock);
 
 	if (spi->irq > 0) {
-		adc->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
-				indio_dev->name,
-				iio_device_id(indio_dev));
+		adc->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name,
+						   iio_device_id(indio_dev));
 		if (!adc->trig)
 			return -ENOMEM;
 
 		adc->trig->ops = &mcp3911_trigger_ops;
 		iio_trigger_set_drvdata(adc->trig, adc);
-		ret = devm_iio_trigger_register(&spi->dev, adc->trig);
+		ret = devm_iio_trigger_register(dev, adc->trig);
 		if (ret)
 			return ret;
 
@@ -557,20 +554,19 @@ static int mcp3911_probe(struct spi_device *spi)
 		 * Some platforms might not allow the option to power it down so
 		 * don't enable the interrupt to avoid extra load on the system.
 		 */
-		ret = devm_request_irq(&spi->dev, spi->irq,
-				&iio_trigger_generic_data_rdy_poll, IRQF_NO_AUTOEN | IRQF_ONESHOT,
-				indio_dev->name, adc->trig);
+		ret = devm_request_irq(dev, spi->irq, &iio_trigger_generic_data_rdy_poll,
+				       IRQF_NO_AUTOEN | IRQF_ONESHOT,
+				       indio_dev->name, adc->trig);
 		if (ret)
 			return ret;
 	}
 
-	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
-			NULL,
-			mcp3911_trigger_handler, NULL);
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+					      mcp3911_trigger_handler, NULL);
 	if (ret)
 		return ret;
 
-	return devm_iio_device_register(&adc->spi->dev, indio_dev);
+	return devm_iio_device_register(dev, indio_dev);
 }
 
 static const struct of_device_id mcp3911_dt_ids[] = {
-- 
2.41.0

[PATCH v8 4/6] iio: adc: mcp3911: fix indentation

[Marcus Folkesson]

The whole file does not make use of indentation properly.
Do something about it.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---

Notes:
    v4:
        - New patch in this series
    v5:
        - Cosmetics
    v6:
        - Little rewording in commit message
    v7:
        - No changes
    v8:
        - No changes

 drivers/iio/adc/mcp3911.c | 41 +++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index 31ee8d7f81de..f9db08813645 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -33,7 +33,7 @@
 #define MCP3911_GAIN_VAL(ch, val)      ((val << 3 * ch) & MCP3911_GAIN_MASK(ch))
 
 #define MCP3911_REG_STATUSCOM		0x0a
-#define MCP3911_STATUSCOM_DRHIZ         BIT(12)
+#define MCP3911_STATUSCOM_DRHIZ		BIT(12)
 #define MCP3911_STATUSCOM_READ		GENMASK(7, 6)
 #define MCP3911_STATUSCOM_CH1_24WIDTH	BIT(4)
 #define MCP3911_STATUSCOM_CH0_24WIDTH	BIT(3)
@@ -111,8 +111,7 @@ static int mcp3911_write(struct mcp3911 *adc, u8 reg, u32 val, u8 len)
 	return spi_write(adc->spi, &val, len + 1);
 }
 
-static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask,
-		u32 val, u8 len)
+static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask, u32 val, u8 len)
 {
 	u32 tmp;
 	int ret;
@@ -127,8 +126,8 @@ static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask,
 }
 
 static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev,
-					struct iio_chan_spec const *chan,
-					long mask)
+				     struct iio_chan_spec const *chan,
+				     long mask)
 {
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
@@ -141,9 +140,9 @@ static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev,
 }
 
 static int mcp3911_read_avail(struct iio_dev *indio_dev,
-			     struct iio_chan_spec const *chan,
-			     const int **vals, int *type, int *length,
-			     long info)
+			      struct iio_chan_spec const *chan,
+			      const int **vals, int *type, int *length,
+			      long info)
 {
 	switch (info) {
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
@@ -212,8 +211,8 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
 }
 
 static int mcp3911_write_raw(struct iio_dev *indio_dev,
-			    struct iio_chan_spec const *channel, int val,
-			    int val2, long mask)
+			     struct iio_chan_spec const *channel, int val,
+			     int val2, long mask)
 {
 	struct mcp3911 *adc = iio_priv(indio_dev);
 	int ret = -EINVAL;
@@ -223,12 +222,12 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		for (int i = 0; i < MCP3911_NUM_SCALES; i++) {
 			if (val == mcp3911_scale_table[i][0] &&
-				val2 == mcp3911_scale_table[i][1]) {
+			    val2 == mcp3911_scale_table[i][1]) {
 
 				adc->gain[channel->channel] = BIT(i);
 				ret = mcp3911_update(adc, MCP3911_REG_GAIN,
-						MCP3911_GAIN_MASK(channel->channel),
-						MCP3911_GAIN_VAL(channel->channel, i), 1);
+						     MCP3911_GAIN_MASK(channel->channel),
+						     MCP3911_GAIN_VAL(channel->channel, i), 1);
 			}
 		}
 		break;
@@ -246,8 +245,8 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 
 		/* Enable offset*/
 		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM,
-				MCP3911_STATUSCOM_EN_OFFCAL,
-				MCP3911_STATUSCOM_EN_OFFCAL, 2);
+				     MCP3911_STATUSCOM_EN_OFFCAL,
+				     MCP3911_STATUSCOM_EN_OFFCAL, 2);
 		break;
 
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
@@ -255,7 +254,7 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 			if (val == mcp3911_osr_table[i]) {
 				val = FIELD_PREP(MCP3911_CONFIG_OSR, i);
 				ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR,
-						val, 2);
+						     val, 2);
 				break;
 			}
 		}
@@ -506,10 +505,10 @@ static int mcp3911_probe(struct spi_device *spi)
 
 	if (device_property_read_bool(dev, "microchip,data-ready-hiz"))
 		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
-				0, 2);
+				     0, 2);
 	else
 		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
-				MCP3911_STATUSCOM_DRHIZ, 2);
+				     MCP3911_STATUSCOM_DRHIZ, 2);
 	if (ret)
 		return ret;
 
@@ -517,12 +516,12 @@ static int mcp3911_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-       /* Set gain to 1 for all channels */
+	/* Set gain to 1 for all channels */
 	for (int i = 0; i < MCP3911_NUM_CHANNELS; i++) {
 		adc->gain[i] = 1;
 		ret = mcp3911_update(adc, MCP3911_REG_GAIN,
-				MCP3911_GAIN_MASK(i),
-				MCP3911_GAIN_VAL(i, 0), 1);
+				     MCP3911_GAIN_MASK(i),
+				     MCP3911_GAIN_VAL(i, 0), 1);
 		if (ret)
 			return ret;
 	}
-- 
2.41.0

[PATCH v8 5/6] iio: adc: mcp3911: avoid ambiguity parameters in macros

[Marcus Folkesson]

Name macro parameters after what they represent instead of 'x'
and make sure the evaluation of that will have no side effects.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---

Notes:
    v5:
        - New patch in this series
    v6:
        - change 'ch' to '(ch)'
    v7:
        - Reword commit message
    v8:
        - No changes

 drivers/iio/adc/mcp3911.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index f9db08813645..281cc1211fd6 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -29,8 +29,8 @@
 #define MCP3911_REG_MOD			0x06
 #define MCP3911_REG_PHASE		0x07
 #define MCP3911_REG_GAIN		0x09
-#define MCP3911_GAIN_MASK(ch)		(GENMASK(2, 0) << 3 * ch)
-#define MCP3911_GAIN_VAL(ch, val)      ((val << 3 * ch) & MCP3911_GAIN_MASK(ch))
+#define MCP3911_GAIN_MASK(ch)		(GENMASK(2, 0) << 3 * (ch))
+#define MCP3911_GAIN_VAL(ch, val)      ((val << 3 * (ch)) & MCP3911_GAIN_MASK(ch))
 
 #define MCP3911_REG_STATUSCOM		0x0a
 #define MCP3911_STATUSCOM_DRHIZ		BIT(12)
@@ -51,8 +51,8 @@
 #define MCP3911_REG_GAINCAL_CH1		0x17
 #define MCP3911_REG_VREFCAL		0x1a
 
-#define MCP3911_CHANNEL(x)		(MCP3911_REG_CHANNEL0 + x * 3)
-#define MCP3911_OFFCAL(x)		(MCP3911_REG_OFFCAL_CH0 + x * 6)
+#define MCP3911_CHANNEL(ch)		(MCP3911_REG_CHANNEL0 + (ch) * 3)
+#define MCP3911_OFFCAL(ch)		(MCP3911_REG_OFFCAL_CH0 + (ch) * 6)
 
 /* Internal voltage reference in mV */
 #define MCP3911_INT_VREF_MV		1200
-- 
2.41.0

[PATCH v8 6/6] iio: adc: mcp3911: add support for the whole MCP39xx family

[Marcus Folkesson]

Microchip does have many similar chips, add support for those.

The new supported chips are:
  - microchip,mcp3910
  - microchip,mcp3912
  - microchip,mcp3913
  - microchip,mcp3914
  - microchip,mcp3918
  - microchip,mcp3919

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---

Notes:
    v2:
        - Use callbacks rather than matching against enum for determine chip variants
    v3:
        - Fix cosmetics
    v4:
        - Do not pollute output variable upon error in *_get_osr() functions.
        - Fix cosmetics
    v5:
        - Reorder text in Kconfig
        - change val to u32 for *_get_osr(), *_set_osr() and *_set_scale()
        - avoid ambiguity parameters in macro
    v6:
        - cosmetics
        - Return on dev_err_probe()
    v7:
        - cosmetics
        - introduce _enable_offset()
    v8:
        - Make osr unsigned
        - Simplify enable_offset functions

 drivers/iio/adc/Kconfig   |   6 +-
 drivers/iio/adc/mcp3911.c | 466 +++++++++++++++++++++++++++++++++-----
 2 files changed, 415 insertions(+), 57 deletions(-)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index dc14bde31ac1..c25285b09dbb 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -785,8 +785,10 @@ config MCP3911
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  Say yes here to build support for Microchip Technology's MCP3911
-	  analog to digital converter.
+	  Say yes here to build support for one of the following
+	  Microchip Technology's analog to digital converters:
+	  MCP3910, MCP3911, MCP3912, MCP3913, MCP3914,
+	  MCP3918 and MCP3919.
 
 	  This driver can also be built as a module. If so, the module will be
 	  called mcp3911.
diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index 281cc1211fd6..d864558bc087 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -61,12 +61,56 @@
 #define MCP3911_REG_WRITE(reg, id)	((((reg) << 1) | ((id) << 6) | (0 << 0)) & 0xff)
 #define MCP3911_REG_MASK		GENMASK(4, 1)
 
-#define MCP3911_NUM_CHANNELS		2
 #define MCP3911_NUM_SCALES		6
 
+/* Registers compatible with MCP3910 */
+#define MCP3910_REG_STATUSCOM		0x0c
+#define MCP3910_STATUSCOM_READ		GENMASK(23, 22)
+#define MCP3910_STATUSCOM_DRHIZ		BIT(20)
+
+#define MCP3910_REG_GAIN		0x0b
+
+#define MCP3910_REG_CONFIG0		0x0d
+#define MCP3910_CONFIG0_EN_OFFCAL	BIT(23)
+#define MCP3910_CONFIG0_OSR		GENMASK(15, 13)
+
+#define MCP3910_REG_CONFIG1		0x0e
+#define MCP3910_CONFIG1_CLKEXT		BIT(6)
+#define MCP3910_CONFIG1_VREFEXT		BIT(7)
+
+#define MCP3910_REG_OFFCAL_CH0		0x0f
+#define MCP3910_OFFCAL(ch)		(MCP3910_REG_OFFCAL_CH0 + (ch) * 6)
+
+/* Maximal number of channels used by the MCP39XX family */
+#define MCP39XX_MAX_NUM_CHANNELS	8
+
 static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 };
 static u32 mcp3911_scale_table[MCP3911_NUM_SCALES][2];
 
+enum mcp3911_id {
+	MCP3910,
+	MCP3911,
+	MCP3912,
+	MCP3913,
+	MCP3914,
+	MCP3918,
+	MCP3919,
+};
+
+struct mcp3911;
+struct mcp3911_chip_info {
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+
+	int (*config)(struct mcp3911 *adc);
+	int (*get_osr)(struct mcp3911 *adc, u32 *val);
+	int (*set_osr)(struct mcp3911 *adc, u32 val);
+	int (*enable_offset)(struct mcp3911 *adc, bool enable);
+	int (*get_offset)(struct mcp3911 *adc, int channel, int *val);
+	int (*set_offset)(struct mcp3911 *adc, int channel, int val);
+	int (*set_scale)(struct mcp3911 *adc, int channel, u32 val);
+};
+
 struct mcp3911 {
 	struct spi_device *spi;
 	struct mutex lock;
@@ -74,14 +118,15 @@ struct mcp3911 {
 	struct clk *clki;
 	u32 dev_addr;
 	struct iio_trigger *trig;
-	u32 gain[MCP3911_NUM_CHANNELS];
+	u32 gain[MCP39XX_MAX_NUM_CHANNELS];
+	const struct mcp3911_chip_info *chip;
 	struct {
-		u32 channels[MCP3911_NUM_CHANNELS];
+		u32 channels[MCP39XX_MAX_NUM_CHANNELS];
 		s64 ts __aligned(8);
 	} scan;
 
 	u8 tx_buf __aligned(IIO_DMA_MINALIGN);
-	u8 rx_buf[MCP3911_NUM_CHANNELS * 3];
+	u8 rx_buf[MCP39XX_MAX_NUM_CHANNELS * 3];
 };
 
 static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len)
@@ -125,6 +170,112 @@ static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask, u32 val, u8 len
 	return mcp3911_write(adc, reg, val, len);
 }
 
+static int mcp3910_enable_offset(struct mcp3911 *adc, bool enable)
+{
+	unsigned int mask = MCP3910_CONFIG0_EN_OFFCAL;
+	unsigned int value = enable ? mask : 0;
+
+	return mcp3911_update(adc, MCP3910_REG_CONFIG0, mask, value, 3);
+}
+
+static int mcp3910_get_offset(struct mcp3911 *adc, int channel, int *val)
+{
+	return mcp3911_read(adc, MCP3910_OFFCAL(channel), val, 3);
+}
+
+static int mcp3910_set_offset(struct mcp3911 *adc, int channel, int val)
+{
+	int ret;
+
+	ret = mcp3911_write(adc, MCP3910_OFFCAL(channel), val, 3);
+	if (ret)
+		return ret;
+
+	return adc->chip->enable_offset(adc, 1);
+}
+
+static int mcp3911_enable_offset(struct mcp3911 *adc, bool enable)
+{
+	unsigned int mask = MCP3911_STATUSCOM_EN_OFFCAL;
+	unsigned int value = enable ? mask : 0;
+
+	return mcp3911_update(adc, MCP3911_REG_STATUSCOM, mask, value, 2);
+}
+
+static int mcp3911_get_offset(struct mcp3911 *adc, int channel, int *val)
+{
+	return mcp3911_read(adc, MCP3911_OFFCAL(channel), val, 3);
+}
+
+static int mcp3911_set_offset(struct mcp3911 *adc, int channel, int val)
+{
+	int ret;
+
+	ret = mcp3911_write(adc, MCP3911_OFFCAL(channel), val, 3);
+	if (ret)
+		return ret;
+
+	return adc->chip->enable_offset(adc, 1);
+}
+
+static int mcp3910_get_osr(struct mcp3911 *adc, u32 *val)
+{
+	int ret;
+	unsigned int osr;
+
+	ret = mcp3911_read(adc, MCP3910_REG_CONFIG0, val, 3);
+	if (ret)
+		return ret;
+
+	osr = FIELD_GET(MCP3910_CONFIG0_OSR, *val);
+	*val = 32 << osr;
+	return 0;
+}
+
+static int mcp3910_set_osr(struct mcp3911 *adc, u32 val)
+{
+	unsigned int osr = FIELD_PREP(MCP3910_CONFIG0_OSR, val);
+	unsigned int mask = MCP3910_CONFIG0_OSR;
+
+	return mcp3911_update(adc, MCP3910_REG_CONFIG0, mask, osr, 3);
+}
+
+static int mcp3911_set_osr(struct mcp3911 *adc, u32 val)
+{
+	unsigned int osr = FIELD_PREP(MCP3911_CONFIG_OSR, val);
+	unsigned int mask = MCP3911_CONFIG_OSR;
+
+	return mcp3911_update(adc, MCP3911_REG_CONFIG, mask, osr, 2);
+}
+
+static int mcp3911_get_osr(struct mcp3911 *adc, u32 *val)
+{
+	int ret;
+	unsigned int osr;
+
+	ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
+	if (ret)
+		return ret;
+
+	osr = FIELD_GET(MCP3911_CONFIG_OSR, *val);
+	*val = 32 << osr;
+	return ret;
+}
+
+static int mcp3910_set_scale(struct mcp3911 *adc, int channel, u32 val)
+{
+	return mcp3911_update(adc, MCP3910_REG_GAIN,
+			      MCP3911_GAIN_MASK(channel),
+			      MCP3911_GAIN_VAL(channel, val), 3);
+}
+
+static int mcp3911_set_scale(struct mcp3911 *adc, int channel, u32 val)
+{
+	return mcp3911_update(adc, MCP3911_REG_GAIN,
+			      MCP3911_GAIN_MASK(channel),
+			      MCP3911_GAIN_VAL(channel, val), 1);
+}
+
 static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev,
 				     struct iio_chan_spec const *chan,
 				     long mask)
@@ -181,20 +332,18 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
 		break;
 
 	case IIO_CHAN_INFO_OFFSET:
-		ret = mcp3911_read(adc,
-				   MCP3911_OFFCAL(channel->channel), val, 3);
+
+		ret = adc->chip->get_offset(adc, channel->channel, val);
 		if (ret)
 			goto out;
 
 		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
-		ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
+		ret = adc->chip->get_osr(adc, val);
 		if (ret)
 			goto out;
 
-		*val = FIELD_GET(MCP3911_CONFIG_OSR, *val);
-		*val = 32 << *val;
 		ret = IIO_VAL_INT;
 		break;
 
@@ -225,9 +374,7 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 			    val2 == mcp3911_scale_table[i][1]) {
 
 				adc->gain[channel->channel] = BIT(i);
-				ret = mcp3911_update(adc, MCP3911_REG_GAIN,
-						     MCP3911_GAIN_MASK(channel->channel),
-						     MCP3911_GAIN_VAL(channel->channel, i), 1);
+				ret = adc->chip->set_scale(adc, channel->channel, i);
 			}
 		}
 		break;
@@ -237,24 +384,13 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 			goto out;
 		}
 
-		/* Write offset */
-		ret = mcp3911_write(adc, MCP3911_OFFCAL(channel->channel), val,
-				    3);
-		if (ret)
-			goto out;
-
-		/* Enable offset*/
-		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM,
-				     MCP3911_STATUSCOM_EN_OFFCAL,
-				     MCP3911_STATUSCOM_EN_OFFCAL, 2);
+		ret = adc->chip->set_offset(adc, channel->channel, val);
 		break;
 
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
 		for (int i = 0; i < ARRAY_SIZE(mcp3911_osr_table); i++) {
 			if (val == mcp3911_osr_table[i]) {
-				val = FIELD_PREP(MCP3911_CONFIG_OSR, i);
-				ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR,
-						     val, 2);
+				ret = adc->chip->set_osr(adc, i);
 				break;
 			}
 		}
@@ -323,12 +459,60 @@ static int mcp3911_calc_scale_table(struct mcp3911 *adc)
 		},						\
 }
 
+static const struct iio_chan_spec mcp3910_channels[] = {
+	MCP3911_CHAN(0),
+	MCP3911_CHAN(1),
+	IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
 static const struct iio_chan_spec mcp3911_channels[] = {
 	MCP3911_CHAN(0),
 	MCP3911_CHAN(1),
 	IIO_CHAN_SOFT_TIMESTAMP(2),
 };
 
+static const struct iio_chan_spec mcp3912_channels[] = {
+	MCP3911_CHAN(0),
+	MCP3911_CHAN(1),
+	MCP3911_CHAN(2),
+	MCP3911_CHAN(3),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static const struct iio_chan_spec mcp3913_channels[] = {
+	MCP3911_CHAN(0),
+	MCP3911_CHAN(1),
+	MCP3911_CHAN(2),
+	MCP3911_CHAN(3),
+	MCP3911_CHAN(4),
+	MCP3911_CHAN(5),
+	IIO_CHAN_SOFT_TIMESTAMP(6),
+};
+
+static const struct iio_chan_spec mcp3914_channels[] = {
+	MCP3911_CHAN(0),
+	MCP3911_CHAN(1),
+	MCP3911_CHAN(2),
+	MCP3911_CHAN(3),
+	MCP3911_CHAN(4),
+	MCP3911_CHAN(5),
+	MCP3911_CHAN(6),
+	MCP3911_CHAN(7),
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+};
+
+static const struct iio_chan_spec mcp3918_channels[] = {
+	MCP3911_CHAN(0),
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct iio_chan_spec mcp3919_channels[] = {
+	MCP3911_CHAN(0),
+	MCP3911_CHAN(1),
+	MCP3911_CHAN(2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 static irqreturn_t mcp3911_trigger_handler(int irq, void *p)
 {
 	struct iio_poll_func *pf = p;
@@ -341,7 +525,7 @@ static irqreturn_t mcp3911_trigger_handler(int irq, void *p)
 			.len = 1,
 		}, {
 			.rx_buf = adc->rx_buf,
-			.len = sizeof(adc->rx_buf),
+			.len = (adc->chip->num_channels - 1) * 3,
 		},
 	};
 	int scan_index;
@@ -384,21 +568,6 @@ static int mcp3911_config(struct mcp3911 *adc)
 	u32 regval;
 	int ret;
 
-	ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
-
-	/*
-	 * Fallback to "device-addr" due to historical mismatch between
-	 * dt-bindings and implementation
-	 */
-	if (ret)
-		device_property_read_u32(dev, "device-addr", &adc->dev_addr);
-	if (adc->dev_addr > 3) {
-		return dev_err_probe(dev, -EINVAL,
-				     "invalid device address (%i). Must be in range 0-3.\n",
-				     adc->dev_addr);
-	}
-	dev_dbg(dev, "use device address %i\n", adc->dev_addr);
-
 	ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &regval, 2);
 	if (ret)
 		return ret;
@@ -433,7 +602,97 @@ static int mcp3911_config(struct mcp3911 *adc)
 	regval &= ~MCP3911_STATUSCOM_READ;
 	regval |= FIELD_PREP(MCP3911_STATUSCOM_READ, 0x02);
 
-	return  mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2);
+	regval &= ~MCP3911_STATUSCOM_DRHIZ;
+	if (device_property_read_bool(dev, "microchip,data-ready-hiz"))
+		regval |= FIELD_PREP(MCP3911_STATUSCOM_DRHIZ, 0);
+	else
+		regval |= FIELD_PREP(MCP3911_STATUSCOM_DRHIZ, 1);
+
+	/* Disable offset to ignore any old values in offset register */
+	regval &= ~MCP3911_STATUSCOM_EN_OFFCAL;
+
+	ret =  mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2);
+	if (ret)
+		return ret;
+
+	/* Set gain to 1 for all channels */
+	ret = mcp3911_read(adc, MCP3911_REG_GAIN, &regval, 1);
+	if (ret)
+		return ret;
+
+	for (int i = 0; i < adc->chip->num_channels - 1; i++) {
+		adc->gain[i] = 1;
+		regval &= ~MCP3911_GAIN_MASK(i);
+	}
+
+	return mcp3911_write(adc, MCP3911_REG_GAIN, regval, 1);
+}
+
+static int mcp3910_config(struct mcp3911 *adc)
+{
+	struct device *dev = &adc->spi->dev;
+	u32 regval;
+	int ret;
+
+	ret = mcp3911_read(adc, MCP3910_REG_CONFIG1, &regval, 3);
+	if (ret)
+		return ret;
+
+	regval &= ~MCP3910_CONFIG1_VREFEXT;
+	if (adc->vref) {
+		dev_dbg(dev, "use external voltage reference\n");
+		regval |= FIELD_PREP(MCP3910_CONFIG1_VREFEXT, 1);
+	} else {
+		dev_dbg(dev, "use internal voltage reference (1.2V)\n");
+		regval |= FIELD_PREP(MCP3910_CONFIG1_VREFEXT, 0);
+	}
+
+	regval &= ~MCP3910_CONFIG1_CLKEXT;
+	if (adc->clki) {
+		dev_dbg(dev, "use external clock as clocksource\n");
+		regval |= FIELD_PREP(MCP3910_CONFIG1_CLKEXT, 1);
+	} else {
+		dev_dbg(dev, "use crystal oscillator as clocksource\n");
+		regval |= FIELD_PREP(MCP3910_CONFIG1_CLKEXT, 0);
+	}
+
+	ret = mcp3911_write(adc, MCP3910_REG_CONFIG1, regval, 3);
+	if (ret)
+		return ret;
+
+	ret = mcp3911_read(adc, MCP3910_REG_STATUSCOM, &regval, 3);
+	if (ret)
+		return ret;
+
+	/* Address counter incremented, cycle through register types */
+	regval &= ~MCP3910_STATUSCOM_READ;
+	regval |= FIELD_PREP(MCP3910_STATUSCOM_READ, 0x02);
+
+	regval &= ~MCP3910_STATUSCOM_DRHIZ;
+	if (device_property_read_bool(dev, "microchip,data-ready-hiz"))
+		regval |= FIELD_PREP(MCP3910_STATUSCOM_DRHIZ, 0);
+	else
+		regval |= FIELD_PREP(MCP3910_STATUSCOM_DRHIZ, 1);
+
+	ret = mcp3911_write(adc, MCP3910_REG_STATUSCOM, regval, 3);
+	if (ret)
+		return ret;
+
+	/* Set gain to 1 for all channels */
+	ret = mcp3911_read(adc, MCP3910_REG_GAIN, &regval, 3);
+	if (ret)
+		return ret;
+
+	for (int i = 0; i < adc->chip->num_channels - 1; i++) {
+		adc->gain[i] = 1;
+		regval &= ~MCP3911_GAIN_MASK(i);
+	}
+	ret = mcp3911_write(adc, MCP3910_REG_GAIN, regval, 3);
+	if (ret)
+		return ret;
+
+	/* Disable offset to ignore any old values in offset register */
+	return adc->chip->enable_offset(adc, 0);
 }
 
 static void mcp3911_cleanup_regulator(void *vref)
@@ -471,6 +730,7 @@ static int mcp3911_probe(struct spi_device *spi)
 
 	adc = iio_priv(indio_dev);
 	adc->spi = spi;
+	adc->chip = spi_get_device_match_data(spi);
 
 	adc->vref = devm_regulator_get_optional(dev, "vref");
 	if (IS_ERR(adc->vref)) {
@@ -499,16 +759,21 @@ static int mcp3911_probe(struct spi_device *spi)
 		}
 	}
 
-	ret = mcp3911_config(adc);
+	/*
+	 * Fallback to "device-addr" due to historical mismatch between
+	 * dt-bindings and implementation.
+	 */
+	ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
 	if (ret)
-		return ret;
+		device_property_read_u32(dev, "device-addr", &adc->dev_addr);
+	if (adc->dev_addr > 3) {
+		return dev_err_probe(dev, -EINVAL,
+				     "invalid device address (%i). Must be in range 0-3.\n",
+				     adc->dev_addr);
+	}
+	dev_dbg(dev, "use device address %i\n", adc->dev_addr);
 
-	if (device_property_read_bool(dev, "microchip,data-ready-hiz"))
-		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
-				     0, 2);
-	else
-		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
-				     MCP3911_STATUSCOM_DRHIZ, 2);
+	ret = adc->chip->config(adc);
 	if (ret)
 		return ret;
 
@@ -517,7 +782,7 @@ static int mcp3911_probe(struct spi_device *spi)
 		return ret;
 
 	/* Set gain to 1 for all channels */
-	for (int i = 0; i < MCP3911_NUM_CHANNELS; i++) {
+	for (int i = 0; i < adc->chip->num_channels - 1; i++) {
 		adc->gain[i] = 1;
 		ret = mcp3911_update(adc, MCP3911_REG_GAIN,
 				     MCP3911_GAIN_MASK(i),
@@ -531,8 +796,8 @@ static int mcp3911_probe(struct spi_device *spi)
 	indio_dev->info = &mcp3911_info;
 	spi_set_drvdata(spi, indio_dev);
 
-	indio_dev->channels = mcp3911_channels;
-	indio_dev->num_channels = ARRAY_SIZE(mcp3911_channels);
+	indio_dev->channels = adc->chip->channels;
+	indio_dev->num_channels = adc->chip->num_channels;
 
 	mutex_init(&adc->lock);
 
@@ -568,14 +833,105 @@ static int mcp3911_probe(struct spi_device *spi)
 	return devm_iio_device_register(dev, indio_dev);
 }
 
+static const struct mcp3911_chip_info mcp3911_chip_info[] = {
+	[MCP3910] = {
+		.channels = mcp3910_channels,
+		.num_channels = ARRAY_SIZE(mcp3910_channels),
+		.config = mcp3910_config,
+		.get_osr = mcp3910_get_osr,
+		.set_osr = mcp3910_set_osr,
+		.enable_offset = mcp3910_enable_offset,
+		.get_offset = mcp3910_get_offset,
+		.set_offset = mcp3910_set_offset,
+		.set_scale = mcp3910_set_scale,
+	},
+	[MCP3911] = {
+		.channels = mcp3911_channels,
+		.num_channels = ARRAY_SIZE(mcp3911_channels),
+		.config = mcp3911_config,
+		.get_osr = mcp3911_get_osr,
+		.set_osr = mcp3911_set_osr,
+		.enable_offset = mcp3911_enable_offset,
+		.get_offset = mcp3911_get_offset,
+		.set_offset = mcp3911_set_offset,
+		.set_scale = mcp3911_set_scale,
+	},
+	[MCP3912] = {
+		.channels = mcp3912_channels,
+		.num_channels = ARRAY_SIZE(mcp3912_channels),
+		.config = mcp3910_config,
+		.get_osr = mcp3910_get_osr,
+		.set_osr = mcp3910_set_osr,
+		.enable_offset = mcp3910_enable_offset,
+		.get_offset = mcp3910_get_offset,
+		.set_offset = mcp3910_set_offset,
+		.set_scale = mcp3910_set_scale,
+	},
+	[MCP3913] = {
+		.channels = mcp3913_channels,
+		.num_channels = ARRAY_SIZE(mcp3913_channels),
+		.config = mcp3910_config,
+		.get_osr = mcp3910_get_osr,
+		.set_osr = mcp3910_set_osr,
+		.enable_offset = mcp3910_enable_offset,
+		.get_offset = mcp3910_get_offset,
+		.set_offset = mcp3910_set_offset,
+		.set_scale = mcp3910_set_scale,
+	},
+	[MCP3914] = {
+		.channels = mcp3914_channels,
+		.num_channels = ARRAY_SIZE(mcp3914_channels),
+		.config = mcp3910_config,
+		.get_osr = mcp3910_get_osr,
+		.set_osr = mcp3910_set_osr,
+		.enable_offset = mcp3910_enable_offset,
+		.get_offset = mcp3910_get_offset,
+		.set_offset = mcp3910_set_offset,
+		.set_scale = mcp3910_set_scale,
+	},
+	[MCP3918] = {
+		.channels = mcp3918_channels,
+		.num_channels = ARRAY_SIZE(mcp3918_channels),
+		.config = mcp3910_config,
+		.get_osr = mcp3910_get_osr,
+		.set_osr = mcp3910_set_osr,
+		.enable_offset = mcp3910_enable_offset,
+		.get_offset = mcp3910_get_offset,
+		.set_offset = mcp3910_set_offset,
+		.set_scale = mcp3910_set_scale,
+	},
+	[MCP3919] = {
+		.channels = mcp3919_channels,
+		.num_channels = ARRAY_SIZE(mcp3919_channels),
+		.config = mcp3910_config,
+		.get_osr = mcp3910_get_osr,
+		.set_osr = mcp3910_set_osr,
+		.enable_offset = mcp3910_enable_offset,
+		.get_offset = mcp3910_get_offset,
+		.set_offset = mcp3910_set_offset,
+		.set_scale = mcp3910_set_scale,
+	},
+};
 static const struct of_device_id mcp3911_dt_ids[] = {
-	{ .compatible = "microchip,mcp3911" },
+	{ .compatible = "microchip,mcp3910", .data = &mcp3911_chip_info[MCP3910] },
+	{ .compatible = "microchip,mcp3911", .data = &mcp3911_chip_info[MCP3911] },
+	{ .compatible = "microchip,mcp3912", .data = &mcp3911_chip_info[MCP3912] },
+	{ .compatible = "microchip,mcp3913", .data = &mcp3911_chip_info[MCP3913] },
+	{ .compatible = "microchip,mcp3914", .data = &mcp3911_chip_info[MCP3914] },
+	{ .compatible = "microchip,mcp3918", .data = &mcp3911_chip_info[MCP3918] },
+	{ .compatible = "microchip,mcp3919", .data = &mcp3911_chip_info[MCP3919] },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mcp3911_dt_ids);
 
 static const struct spi_device_id mcp3911_id[] = {
-	{ "mcp3911", 0 },
+	{ "mcp3910", (kernel_ulong_t)&mcp3911_chip_info[MCP3910] },
+	{ "mcp3911", (kernel_ulong_t)&mcp3911_chip_info[MCP3911] },
+	{ "mcp3912", (kernel_ulong_t)&mcp3911_chip_info[MCP3912] },
+	{ "mcp3913", (kernel_ulong_t)&mcp3911_chip_info[MCP3913] },
+	{ "mcp3914", (kernel_ulong_t)&mcp3911_chip_info[MCP3914] },
+	{ "mcp3918", (kernel_ulong_t)&mcp3911_chip_info[MCP3918] },
+	{ "mcp3919", (kernel_ulong_t)&mcp3911_chip_info[MCP3919] },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, mcp3911_id);
-- 
2.41.0

Re: [PATCH v8 6/6] iio: adc: mcp3911: add support for the whole MCP39xx family

[Marcus Folkesson]

[-- Attachment #1: Type: text/plain, Size: 510 bytes --]

On Tue, Aug 22, 2023 at 09:22:59PM +0200, Marcus Folkesson wrote:
> Microchip does have many similar chips, add support for those.
> 
> The new supported chips are:
>   - microchip,mcp3910
>   - microchip,mcp3912
>   - microchip,mcp3913
>   - microchip,mcp3914
>   - microchip,mcp3918
>   - microchip,mcp3919
> 


Forgot to include the tag from Andy:

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>


/Marcus

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v8 0/6] Add support for the whole MCP39xx family

[Jonathan Cameron]

On Tue, 22 Aug 2023 21:22:53 +0200
Marcus Folkesson <marcus.folkesson@gmail.com> wrote:

> The main goal with this patchset is to add support for all similar
> MCP39xx ADC chips.
> During all patch iterations we ended up with a few cleanup patches.
> 
> See version notes in each patch.
> 
> Marcus Folkesson (6):
>   dt-bindings: iio: adc: mcp3911: add support for the whole MCP39xx
>     family
>   iio: adc: mcp3911: make use of dev_err_probe()
>   iio: adc: mcp3911: simplify usage of spi->dev
>   iio: adc: mcp3911: fix indentation
>   iio: adc: mcp3911: avoid ambiguity parameters in macros
>   iio: adc: mcp3911: add support for the whole MCP39xx family
> 
>  .../bindings/iio/adc/microchip,mcp3911.yaml   |   6 +
>  drivers/iio/adc/Kconfig                       |   6 +-
>  drivers/iio/adc/mcp3911.c                     | 562 ++++++++++++++----
>  3 files changed, 462 insertions(+), 112 deletions(-)
> 
> 
> base-commit: b320441c04c9bea76cbee1196ae55c20288fd7a6

Series applied.

Thanks to both Marcus (for working through the iterations) and Andy for
providing the detailed feedback.

Jonathan