[PATCH 6.1 00/31] 6.1.52-rc1 review

[PATCH 6.1 00/31] 6.1.52-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.1.52 release.
There are 31 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.52-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.1.52-rc1

Mario Limonciello <mario.limonciello@amd.com>
    pinctrl: amd: Don't show `Invalid config param` errors

Marco Felsch <m.felsch@pengutronix.de>
    usb: typec: tcpci: clear the fault status bit

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()

Hugo Villeneuve <hvilleneuve@dimonoff.com>
    dt-bindings: sc16is7xx: Add property to change GPIO function

Badhri Jagan Sridharan <badhri@google.com>
    tcpm: Avoid soft reset when partner does not support get_status

Juerg Haefliger <juerg.haefliger@canonical.com>
    fsi: master-ast-cf: Add MODULE_FIRMWARE macro

Wang Ming <machel@vivo.com>
    firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe

Hugo Villeneuve <hvilleneuve@dimonoff.com>
    serial: sc16is7xx: fix bug when first setting GPIO direction

Hugo Villeneuve <hvilleneuve@dimonoff.com>
    serial: sc16is7xx: fix broken port 0 uart init

Johan Hovold <johan+linaro@kernel.org>
    serial: qcom-geni: fix opp vote on shutdown

Deren Wu <deren.wu@mediatek.com>
    wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU

Deren Wu <deren.wu@mediatek.com>
    wifi: mt76: mt7921: do not support one stream on secondary antenna only

Zheng Wang <zyytlz.wz@163.com>
    Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition

Nam Cao <namcaov@gmail.com>
    staging: rtl8712: fix race condition

Aaron Armstrong Skomra <aaron.skomra@wacom.com>
    HID: wacom: remove the battery when the EKR is off

Xu Yang <xu.yang_2@nxp.com>
    usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0

Luke Lu <luke.lu@libre.computer>
    usb: dwc3: meson-g12a: do post init to fix broken usb after resumption

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Fix init call orders for UAC1

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add FOXCONN T99W368/T99W373 product

Martin Kohn <m.kohn@welotec.com>
    USB: serial: option: add Quectel EM05G variant (0x030e)

Christoph Hellwig <hch@lst.de>
    modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules

Christoph Hellwig <hch@lst.de>
    rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff

Christoph Hellwig <hch@lst.de>
    net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index

Christoph Hellwig <hch@lst.de>
    mmc: au1xmmc: force non-modular build and remove symbol_get usage

Arnd Bergmann <arnd@arndb.de>
    ARM: pxa: remove use of symbol_get()

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: reduce descriptor size if remaining bytes is less than request size

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: replace one-element array with flex-array member in struct smb2_ea_info

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: fix wrong DataOffset validation of create context

Gao Xiang <xiang@kernel.org>
    erofs: ensure that the post-EOF tails are all zeroed


-------------

Diffstat:

 .../devicetree/bindings/serial/nxp,sc16is7xx.txt   | 46 ++++++++++++++++++++++
 Makefile                                           |  4 +-
 arch/arm/mach-pxa/sharpsl_pm.c                     |  2 -
 arch/arm/mach-pxa/spitz.c                          | 14 +------
 arch/mips/alchemy/devboards/db1000.c               |  8 +---
 arch/mips/alchemy/devboards/db1200.c               | 19 +--------
 arch/mips/alchemy/devboards/db1300.c               | 10 +----
 drivers/bluetooth/btsdio.c                         |  1 +
 drivers/firmware/stratix10-svc.c                   |  2 +-
 drivers/fsi/fsi-master-ast-cf.c                    |  1 +
 drivers/hid/wacom.h                                |  1 +
 drivers/hid/wacom_sys.c                            | 25 ++++++++++--
 drivers/hid/wacom_wac.c                            |  1 +
 drivers/hid/wacom_wac.h                            |  1 +
 drivers/mmc/host/Kconfig                           |  5 ++-
 drivers/net/ethernet/freescale/enetc/enetc_ptp.c   |  2 +-
 .../net/wireless/mediatek/mt76/mt76_connac_mac.c   |  7 +++-
 drivers/net/wireless/mediatek/mt76/mt7921/main.c   |  2 +-
 drivers/pinctrl/pinctrl-amd.c                      |  4 +-
 drivers/rtc/rtc-ds1685.c                           |  2 +-
 drivers/staging/rtl8712/os_intfs.c                 |  1 +
 drivers/staging/rtl8712/usb_intf.c                 |  1 -
 drivers/tty/serial/qcom_geni_serial.c              |  5 +++
 drivers/tty/serial/sc16is7xx.c                     | 17 +++++++-
 drivers/usb/chipidea/ci_hdrc_imx.c                 | 10 +++--
 drivers/usb/chipidea/usbmisc_imx.c                 |  6 ++-
 drivers/usb/dwc3/dwc3-meson-g12a.c                 |  6 +++
 drivers/usb/serial/option.c                        |  7 ++++
 drivers/usb/typec/tcpm/tcpci.c                     |  4 ++
 drivers/usb/typec/tcpm/tcpm.c                      |  7 ++++
 fs/erofs/zdata.c                                   |  2 +
 fs/nilfs2/alloc.c                                  |  3 +-
 fs/nilfs2/inode.c                                  |  7 +++-
 fs/nilfs2/segment.c                                |  5 +++
 fs/smb/server/auth.c                               |  3 ++
 fs/smb/server/oplock.c                             |  2 +-
 fs/smb/server/smb2pdu.c                            |  2 +-
 fs/smb/server/smb2pdu.h                            |  2 +-
 fs/smb/server/transport_rdma.c                     | 25 ++++++++----
 include/linux/usb/tcpci.h                          |  1 +
 kernel/module/main.c                               | 14 +++++--
 sound/usb/stream.c                                 | 11 +++++-
 42 files changed, 209 insertions(+), 89 deletions(-)

[PATCH 6.1 01/31] erofs: ensure that the post-EOF tails are all zeroed

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gao Xiang <hsiangkao@linux.alibaba.com>

commit e4c1cf523d820730a86cae2c6d55924833b6f7ac upstream.

This was accidentally fixed up in commit e4c1cf523d82 but we can't
take the full change due to other dependancy issues, so here is just
the actual bugfix that is needed.

[Background]

keltargw reported an issue [1] that with mmaped I/Os, sometimes the
tail of the last page (after file ends) is not filled with zeroes.

The root cause is that such tail page could be wrongly selected for
inplace I/Os so the zeroed part will then be filled with compressed
data instead of zeroes.

A simple fix is to avoid doing inplace I/Os for such tail parts,
actually that was already fixed upstream in commit e4c1cf523d82
("erofs: tidy up z_erofs_do_read_page()") by accident.

[1] https://lore.kernel.org/r/3ad8b469-25db-a297-21f9-75db2d6ad224@linux.alibaba.com

Reported-by: keltargw <keltar.gw@gmail.com>
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/erofs/zdata.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/erofs/zdata.c
+++ b/fs/erofs/zdata.c
@@ -869,6 +869,8 @@ hitted:
 	cur = end - min_t(erofs_off_t, offset + end - map->m_la, end);
 	if (!(map->m_flags & EROFS_MAP_MAPPED)) {
 		zero_user_segment(page, cur, end);
+		++spiltted;
+		tight = false;
 		goto next_part;
 	}
 	if (map->m_flags & EROFS_MAP_FRAGMENT) {

[PATCH 6.1 02/31] ksmbd: fix wrong DataOffset validation of create context

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

commit 17d5b135bb720832364e8f55f6a887a3c7ec8fdb upstream.

If ->DataOffset of create context is 0, DataBuffer size is not correctly
validated. This patch change wrong validation code and consider tag
length in request.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21824
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/oplock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/smb/server/oplock.c
+++ b/fs/smb/server/oplock.c
@@ -1492,7 +1492,7 @@ struct create_context *smb2_find_context
 		    name_len < 4 ||
 		    name_off + name_len > cc_len ||
 		    (value_off & 0x7) != 0 ||
-		    (value_off && (value_off < name_off + name_len)) ||
+		    (value_len && value_off < name_off + (name_len < 8 ? 8 : name_len)) ||
 		    ((u64)value_off + value_len > cc_len))
 			return ERR_PTR(-EINVAL);
 

[PATCH 6.1 03/31] ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

commit 4b081ce0d830b684fdf967abc3696d1261387254 upstream.

If authblob->SessionKey.Length is bigger than session key
size(CIFS_KEY_SIZE), slub overflow can happen in key exchange codes.
cifs_arc4_crypt copy to session key array from SessionKey from client.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21940
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/auth.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/smb/server/auth.c
+++ b/fs/smb/server/auth.c
@@ -355,6 +355,9 @@ int ksmbd_decode_ntlmssp_auth_blob(struc
 		if (blob_len < (u64)sess_key_off + sess_key_len)
 			return -EINVAL;
 
+		if (sess_key_len > CIFS_KEY_SIZE)
+			return -EINVAL;
+
 		ctx_arc4 = kmalloc(sizeof(*ctx_arc4), GFP_KERNEL);
 		if (!ctx_arc4)
 			return -ENOMEM;

[PATCH 6.1 04/31] ksmbd: replace one-element array with flex-array member in struct smb2_ea_info

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

commit 0ba5439d9afa2722e7728df56f272c89987540a4 upstream.

UBSAN complains about out-of-bounds array indexes on 1-element arrays in
struct smb2_ea_info.

UBSAN: array-index-out-of-bounds in fs/smb/server/smb2pdu.c:4335:15
index 1 is out of range for type 'char [1]'
CPU: 1 PID: 354 Comm: kworker/1:4 Not tainted 6.5.0-rc4 #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
Reference Platform, BIOS 6.00 07/22/2020
Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
Call Trace:
 <TASK>
 __dump_stack linux/lib/dump_stack.c:88
 dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106
 dump_stack+0x10/0x20 linux/lib/dump_stack.c:113
 ubsan_epilogue linux/lib/ubsan.c:217
 __ubsan_handle_out_of_bounds+0xc6/0x110 linux/lib/ubsan.c:348
 smb2_get_ea linux/fs/smb/server/smb2pdu.c:4335
 smb2_get_info_file linux/fs/smb/server/smb2pdu.c:4900
 smb2_query_info+0x63ae/0x6b20 linux/fs/smb/server/smb2pdu.c:5275
 __process_request linux/fs/smb/server/server.c:145
 __handle_ksmbd_work linux/fs/smb/server/server.c:213
 handle_ksmbd_work+0x348/0x10b0 linux/fs/smb/server/server.c:266
 process_one_work+0x85a/0x1500 linux/kernel/workqueue.c:2597
 worker_thread+0xf3/0x13a0 linux/kernel/workqueue.c:2748
 kthread+0x2b7/0x390 linux/kernel/kthread.c:389
 ret_from_fork+0x44/0x90 linux/arch/x86/kernel/process.c:145
 ret_from_fork_asm+0x1b/0x30 linux/arch/x86/entry/entry_64.S:304
 </TASK>

Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/smb2pdu.c |    2 +-
 fs/smb/server/smb2pdu.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -4322,7 +4322,7 @@ static int smb2_get_ea(struct ksmbd_work
 		if (!strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
 			name_len -= XATTR_USER_PREFIX_LEN;
 
-		ptr = (char *)(&eainfo->name + name_len + 1);
+		ptr = eainfo->name + name_len + 1;
 		buf_free_len -= (offsetof(struct smb2_ea_info, name) +
 				name_len + 1);
 		/* bailout if xattr can't fit in buf_free_len */
--- a/fs/smb/server/smb2pdu.h
+++ b/fs/smb/server/smb2pdu.h
@@ -410,7 +410,7 @@ struct smb2_ea_info {
 	__u8   Flags;
 	__u8   EaNameLength;
 	__le16 EaValueLength;
-	char name[1];
+	char name[];
 	/* optionally followed by value */
 } __packed; /* level 15 Query */
 

[PATCH 6.1 05/31] ksmbd: reduce descriptor size if remaining bytes is less than request size

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

commit e628bf939aafb61fbc56e9bdac8795cea5127e25 upstream.

Create 3 kinds of files to reproduce this problem.

dd if=/dev/urandom of=127k.bin bs=1024 count=127
dd if=/dev/urandom of=128k.bin bs=1024 count=128
dd if=/dev/urandom of=129k.bin bs=1024 count=129

When copying files from ksmbd share to windows or cifs.ko, The following
error message happen from windows client.

"The file '129k.bin' is too large for the destination filesystem."

We can see the error logs from ksmbd debug prints

[48394.611537] ksmbd: RDMA r/w request 0x0: token 0x669d, length 0x20000
[48394.612054] ksmbd: smb_direct: RDMA write, len 0x20000, needed credits 0x1
[48394.612572] ksmbd: filename 129k.bin, offset 131072, len 131072
[48394.614189] ksmbd: nbytes 1024, offset 132096 mincount 0
[48394.614585] ksmbd: Failed to process 8 [-22]

And we can reproduce it with cifs.ko,
e.g. dd if=129k.bin of=/dev/null bs=128KB count=2

This problem is that ksmbd rdma return error if remaining bytes is less
than Length of Buffer Descriptor V1 Structure.

smb_direct_rdma_xmit()
...
     if (desc_buf_len == 0 || total_length > buf_len ||
           total_length > t->max_rdma_rw_size)
               return -EINVAL;

This patch reduce descriptor size with remaining bytes and remove the
check for total_length and buf_len.

Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/transport_rdma.c |   25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

--- a/fs/smb/server/transport_rdma.c
+++ b/fs/smb/server/transport_rdma.c
@@ -1366,24 +1366,35 @@ static int smb_direct_rdma_xmit(struct s
 	LIST_HEAD(msg_list);
 	char *desc_buf;
 	int credits_needed;
-	unsigned int desc_buf_len;
-	size_t total_length = 0;
+	unsigned int desc_buf_len, desc_num = 0;
 
 	if (t->status != SMB_DIRECT_CS_CONNECTED)
 		return -ENOTCONN;
 
+	if (buf_len > t->max_rdma_rw_size)
+		return -EINVAL;
+
 	/* calculate needed credits */
 	credits_needed = 0;
 	desc_buf = buf;
 	for (i = 0; i < desc_len / sizeof(*desc); i++) {
+		if (!buf_len)
+			break;
+
 		desc_buf_len = le32_to_cpu(desc[i].length);
+		if (!desc_buf_len)
+			return -EINVAL;
+
+		if (desc_buf_len > buf_len) {
+			desc_buf_len = buf_len;
+			desc[i].length = cpu_to_le32(desc_buf_len);
+			buf_len = 0;
+		}
 
 		credits_needed += calc_rw_credits(t, desc_buf, desc_buf_len);
 		desc_buf += desc_buf_len;
-		total_length += desc_buf_len;
-		if (desc_buf_len == 0 || total_length > buf_len ||
-		    total_length > t->max_rdma_rw_size)
-			return -EINVAL;
+		buf_len -= desc_buf_len;
+		desc_num++;
 	}
 
 	ksmbd_debug(RDMA, "RDMA %s, len %#x, needed credits %#x\n",
@@ -1395,7 +1406,7 @@ static int smb_direct_rdma_xmit(struct s
 
 	/* build rdma_rw_ctx for each descriptor */
 	desc_buf = buf;
-	for (i = 0; i < desc_len / sizeof(*desc); i++) {
+	for (i = 0; i < desc_num; i++) {
 		msg = kzalloc(offsetof(struct smb_direct_rdma_rw_msg, sg_list) +
 			      sizeof(struct scatterlist) * SG_CHUNK_SIZE, GFP_KERNEL);
 		if (!msg) {

[PATCH 6.1 06/31] ARM: pxa: remove use of symbol_get()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 0faa29c4207e6e29cfc81b427df60e326c37083a upstream.

The spitz board file uses the obscure symbol_get() function
to optionally call a function from sharpsl_pm.c if that is
built. However, the two files are always built together
these days, and have been for a long time, so this can
be changed to a normal function call.

Link: https://lore.kernel.org/lkml/20230731162639.GA9441@lst.de/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-pxa/sharpsl_pm.c |    2 --
 arch/arm/mach-pxa/spitz.c      |   14 +-------------
 2 files changed, 1 insertion(+), 15 deletions(-)

--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -220,8 +220,6 @@ void sharpsl_battery_kick(void)
 {
 	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
 }
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
 
 static void sharpsl_battery_thread(struct work_struct *private_)
 {
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
@@ -510,17 +509,6 @@ static struct ads7846_platform_data spit
 	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
@@ -548,7 +536,7 @@ static struct corgi_lcd_platform_data sp
 	.max_intensity		= 0x2f,
 	.default_intensity	= 0x1f,
 	.limit_mask		= 0x0b,
-	.kick_battery		= spitz_bl_kick_battery,
+	.kick_battery		= sharpsl_battery_kick,
 };
 
 static struct spi_board_info spitz_spi_devices[] = {

[PATCH 6.1 07/31] mmc: au1xmmc: force non-modular build and remove symbol_get usage

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <hch@lst.de>

commit d4a5c59a955bba96b273ec1a5885bada24c56979 upstream.

au1xmmc is split somewhat awkwardly into the main mmc subsystem driver,
and callbacks in platform_data that sit under arch/mips/ and are
always built in.  The latter than call mmc_detect_change through
symbol_get.  Remove the use of symbol_get by requiring the driver
to be built in.  In the future the interrupt handlers for card
insert/eject detection should probably be moved into the main driver,
and which point it can be built modular again.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[mcgrof: squashed in depends on MMC=y suggested by Arnd]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/alchemy/devboards/db1000.c |    8 +-------
 arch/mips/alchemy/devboards/db1200.c |   19 ++-----------------
 arch/mips/alchemy/devboards/db1300.c |   10 +---------
 drivers/mmc/host/Kconfig             |    5 +++--
 4 files changed, 7 insertions(+), 35 deletions(-)

--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -14,7 +14,6 @@
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
-#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/spi/spi.h>
@@ -167,12 +166,7 @@ static struct platform_device db1x00_aud
 
 static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	mmc_cd(ptr, msecs_to_jiffies(500));
-	symbol_put(mmc_detect_change);
-
+	mmc_detect_change(ptr, msecs_to_jiffies(500));
 	return IRQ_HANDLED;
 }
 
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -10,7 +10,6 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/leds.h>
@@ -340,14 +339,7 @@ static irqreturn_t db1200_mmc_cd(int irq
 
 static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	if (mmc_cd) {
-		mmc_cd(ptr, msecs_to_jiffies(200));
-		symbol_put(mmc_detect_change);
-	}
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == DB1200_SD0_INSERT_INT)
@@ -431,14 +423,7 @@ static irqreturn_t pb1200_mmc1_cd(int ir
 
 static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	if (mmc_cd) {
-		mmc_cd(ptr, msecs_to_jiffies(200));
-		symbol_put(mmc_detect_change);
-	}
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == PB1200_SD1_INSERT_INT)
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -17,7 +17,6 @@
 #include <linux/interrupt.h>
 #include <linux/ata_platform.h>
 #include <linux/mmc/host.h>
-#include <linux/module.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/platnand.h>
 #include <linux/platform_device.h>
@@ -459,14 +458,7 @@ static irqreturn_t db1300_mmc_cd(int irq
 
 static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m.  We can only be called once MMC core has
-	 * initialized the controller, so symbol_get() should always succeed.
-	 */
-	mmc_cd = symbol_get(mmc_detect_change);
-	mmc_cd(ptr, msecs_to_jiffies(200));
-	symbol_put(mmc_detect_change);
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == DB1300_SD1_INSERT_INT)
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -528,11 +528,12 @@ config MMC_ALCOR
 	  of Alcor Micro PCI-E card reader
 
 config MMC_AU1X
-	tristate "Alchemy AU1XX0 MMC Card Interface support"
+	bool "Alchemy AU1XX0 MMC Card Interface support"
 	depends on MIPS_ALCHEMY
+	depends on MMC=y
 	help
 	  This selects the AMD Alchemy(R) Multimedia card interface.
-	  If you have a Alchemy platform with a MMC slot, say Y or M here.
+	  If you have a Alchemy platform with a MMC slot, say Y here.
 
 	  If unsure, say N.
 

[PATCH 6.1 08/31] net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <hch@lst.de>

commit 569820befb16ffc755ab7af71f4f08cc5f68f0fe upstream.

enetc_phc_index is only used via symbol_get, which was only ever
intended for very internal symbols like this one.  Use EXPORT_SYMBOL_GPL
for it so that symbol_get can enforce only being used on
EXPORT_SYMBOL_GPL symbols.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/enetc/enetc_ptp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
@@ -8,7 +8,7 @@
 #include "enetc.h"
 
 int enetc_phc_index = -1;
-EXPORT_SYMBOL(enetc_phc_index);
+EXPORT_SYMBOL_GPL(enetc_phc_index);
 
 static struct ptp_clock_info enetc_ptp_caps = {
 	.owner		= THIS_MODULE,

[PATCH 6.1 09/31] rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <hch@lst.de>

commit 95e7ebc6823170256a8ce19fad87912805bfa001 upstream.

ds1685_rtc_poweroff is only used externally via symbol_get, which was
only ever intended for very internal symbols like this one.  Use
EXPORT_SYMBOL_GPL for it so that symbol_get can enforce only being used
on EXPORT_SYMBOL_GPL symbols.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-ds1685.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -1434,7 +1434,7 @@ ds1685_rtc_poweroff(struct platform_devi
 		unreachable();
 	}
 }
-EXPORT_SYMBOL(ds1685_rtc_poweroff);
+EXPORT_SYMBOL_GPL(ds1685_rtc_poweroff);
 /* ----------------------------------------------------------------------- */
 
 

[PATCH 6.1 10/31] modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <hch@lst.de>

commit 9011e49d54dcc7653ebb8a1e05b5badb5ecfa9f9 upstream.

It has recently come to my attention that nvidia is circumventing the
protection added in 262e6ae7081d ("modules: inherit
TAINT_PROPRIETARY_MODULE") by importing exports from their proprietary
modules into an allegedly GPL licensed module and then rexporting them.

Given that symbol_get was only ever intended for tightly cooperating
modules using very internal symbols it is logical to restrict it to
being used on EXPORT_SYMBOL_GPL and prevent nvidia from costly DMCA
Circumvention of Access Controls law suites.

All symbols except for four used through symbol_get were already exported
as EXPORT_SYMBOL_GPL, and the remaining four ones were switched over in
the preparation patches.

Fixes: 262e6ae7081d ("modules: inherit TAINT_PROPRIETARY_MODULE")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/module/main.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/kernel/module/main.c
+++ b/kernel/module/main.c
@@ -1214,12 +1214,20 @@ void *__symbol_get(const char *symbol)
 	};
 
 	preempt_disable();
-	if (!find_symbol(&fsa) || strong_try_module_get(fsa.owner)) {
-		preempt_enable();
-		return NULL;
+	if (!find_symbol(&fsa))
+		goto fail;
+	if (fsa.license != GPL_ONLY) {
+		pr_warn("failing symbol_get of non-GPLONLY symbol %s.\n",
+			symbol);
+		goto fail;
 	}
+	if (strong_try_module_get(fsa.owner))
+		goto fail;
 	preempt_enable();
 	return (void *)kernel_symbol_value(fsa.sym);
+fail:
+	preempt_enable();
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(__symbol_get);
 

[PATCH 6.1 11/31] USB: serial: option: add Quectel EM05G variant (0x030e)

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Kohn <m.kohn@welotec.com>

commit 873854c02364ebb991fc06f7148c14dfb5419e1b upstream.

Add Quectel EM05G with product ID 0x030e.
Interface 4 is used for qmi.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030e Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Martin Kohn <m.kohn@welotec.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -259,6 +259,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_EM05G			0x030a
 #define QUECTEL_PRODUCT_EM060K			0x030b
 #define QUECTEL_PRODUCT_EM05G_CS		0x030c
+#define QUECTEL_PRODUCT_EM05GV2			0x030e
 #define QUECTEL_PRODUCT_EM05CN_SG		0x0310
 #define QUECTEL_PRODUCT_EM05G_SG		0x0311
 #define QUECTEL_PRODUCT_EM05CN			0x0312
@@ -1190,6 +1191,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff),
 	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05GV2, 0xff),
+	  .driver_info = RSVD(4) | ZLP },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff),
 	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_RS, 0xff),

[PATCH 6.1 12/31] USB: serial: option: add FOXCONN T99W368/T99W373 product

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Slark Xiao <slark_xiao@163.com>

commit 4d9488b294e1f8353bbcadc4c7172a7f7490199b upstream.

The difference of T99W368 and T99W373 is the chip solution.
T99W368 is designed based on Qualcomm SDX65 and T99W373 is SDX62.

Test evidence as below:
T:  Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0f0 Rev=05.04
S:  Manufacturer=FII
S:  Product=OLYMPIC USB WWAN Adapter
S:  SerialNumber=78ada8c4
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0ee Rev=05.04
S:  Manufacturer=FII
S:  Product=OLYMPIC USB WWAN Adapter
S:  SerialNumber=78ada8d5
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Both of them share the same port configuration:
0&1: MBIM, 2: Modem, 3:GNSS, 4:NMEA, 5:Diag
GNSS port don't use serial driver.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2235,6 +2235,10 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),			/* Foxconn T99W265 MBIM */
 	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff),			/* Foxconn T99W368 MBIM */
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff),			/* Foxconn T99W373 MBIM */
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x1782, 0x4d10) },						/* Fibocom L610 (AT mode) */

[PATCH 6.1 13/31] ALSA: usb-audio: Fix init call orders for UAC1

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 5fadc941d07530d681f3b7ec91e56d8445bc3825 upstream.

There have been reports of USB-audio driver spewing errors at the
probe time on a few devices like Jabra and Logitech.  The suggested
fix there couldn't be applied as is, unfortunately, because it'll
likely break other devices.

But, the patch suggested an interesting point: looking at the current
init code in stream.c, one may notice that it does initialize
differently from the device setup in endpoint.c.  Namely, for UAC1, we
should call snd_usb_init_pitch() and snd_usb_init_sample_rate() after
setting the interface, while the init sequence at parsing calls them
before setting the interface blindly.

This patch changes the init sequence at parsing for UAC1 (and other
devices that need a similar behavior) to be aligned with the rest of
the code, setting the interface at first.  And, this fixes the
long-standing problems on a few UAC1 devices like Jabra / Logitech,
as reported, too.

Reported-and-tested-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Closes: https://lore.kernel.org/r/202bbbc0f51522e8545783c4c5577d12a8e2d56d.camel@infinera.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230821111857.28926-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/stream.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -1093,6 +1093,7 @@ static int __snd_usb_parse_audio_interfa
 	int i, altno, err, stream;
 	struct audioformat *fp = NULL;
 	struct snd_usb_power_domain *pd = NULL;
+	bool set_iface_first;
 	int num, protocol;
 
 	dev = chip->dev;
@@ -1223,11 +1224,19 @@ static int __snd_usb_parse_audio_interfa
 				return err;
 		}
 
+		set_iface_first = false;
+		if (protocol == UAC_VERSION_1 ||
+		    (chip->quirk_flags & QUIRK_FLAG_SET_IFACE_FIRST))
+			set_iface_first = true;
+
 		/* try to set the interface... */
 		usb_set_interface(chip->dev, iface_no, 0);
+		if (set_iface_first)
+			usb_set_interface(chip->dev, iface_no, altno);
 		snd_usb_init_pitch(chip, fp);
 		snd_usb_init_sample_rate(chip, fp, fp->rate_max);
-		usb_set_interface(chip->dev, iface_no, altno);
+		if (!set_iface_first)
+			usb_set_interface(chip->dev, iface_no, altno);
 	}
 	return 0;
 }

[PATCH 6.1 14/31] usb: dwc3: meson-g12a: do post init to fix broken usb after resumption

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luke Lu <luke.lu@libre.computer>

commit 1fa206bb764f37d2ab4bf671e483153ef0659b34 upstream.

Device connected to usb otg port of GXL-based boards can not be
recognised after resumption, doesn't recover even if disconnect and
reconnect the device. dmesg shows it disconnects during resumption.

[   41.492911] usb 1-2: USB disconnect, device number 3
[   41.499346] usb 1-2: unregistering device
[   41.511939] usb 1-2: unregistering interface 1-2:1.0

Calling usb_post_init() will fix this issue, and it's tested and
verified on libretech's aml-s905x-cc board.

Cc: stable@vger.kernel.org # v5.8+
Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Signed-off-by: Luke Lu <luke.lu@libre.computer>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230809212911.18903-1-luke.lu@libre.computer
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -938,6 +938,12 @@ static int __maybe_unused dwc3_meson_g12
 			return ret;
 	}
 
+	if (priv->drvdata->usb_post_init) {
+		ret = priv->drvdata->usb_post_init(priv);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 

[PATCH 6.1 15/31] usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xu Yang <xu.yang_2@nxp.com>

commit 36668515d56bf73f06765c71e08c8f7465f1e5c4 upstream.

In current driver, the value of tuning parameter will not take effect
if samsung,picophy-* is assigned as 0. Because 0 is also a valid value
acccording to the description of USB_PHY_CFG1 register, this will improve
the logic to let it work.

Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230627112126.1882666-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_imx.c |   10 ++++++----
 drivers/usb/chipidea/usbmisc_imx.c |    6 ++++--
 2 files changed, 10 insertions(+), 6 deletions(-)

--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -175,10 +175,12 @@ static struct imx_usbmisc_data *usbmisc_
 	if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
 		data->ulpi = 1;
 
-	of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
-			&data->emp_curr_control);
-	of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
-			&data->dc_vol_level_adjust);
+	if (of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
+			&data->emp_curr_control))
+		data->emp_curr_control = -1;
+	if (of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
+			&data->dc_vol_level_adjust))
+		data->dc_vol_level_adjust = -1;
 
 	return data;
 }
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -657,13 +657,15 @@ static int usbmisc_imx7d_init(struct imx
 			usbmisc->base + MX7D_USBNC_USB_CTRL2);
 		/* PHY tuning for signal quality */
 		reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
-		if (data->emp_curr_control && data->emp_curr_control <=
+		if (data->emp_curr_control >= 0 &&
+			data->emp_curr_control <=
 			(TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
 			reg &= ~TXPREEMPAMPTUNE0_MASK;
 			reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
 		}
 
-		if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <=
+		if (data->dc_vol_level_adjust >= 0 &&
+			data->dc_vol_level_adjust <=
 			(TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
 			reg &= ~TXVREFTUNE0_MASK;
 			reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);

[PATCH 6.1 16/31] HID: wacom: remove the battery when the EKR is off

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Armstrong Skomra <aaron.skomra@wacom.com>

commit 9ac6678b95b0dd9458a7a6869f46e51cd55a1d84 upstream.

Currently the EKR battery remains even after we stop getting information
from the device. This can lead to a stale battery persisting indefinitely
in userspace.

The remote sends a heartbeat every 10 seconds. Delete the battery if we
miss two heartbeats (after 21 seconds). Restore the battery once we see
a heartbeat again.

Signed-off-by: Aaron Skomra <skomra@gmail.com>
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Fixes: 9f1015d45f62 ("HID: wacom: EKR: attach the power_supply on first connection")
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/wacom.h     |    1 +
 drivers/hid/wacom_sys.c |   25 +++++++++++++++++++++----
 drivers/hid/wacom_wac.c |    1 +
 drivers/hid/wacom_wac.h |    1 +
 4 files changed, 24 insertions(+), 4 deletions(-)

--- a/drivers/hid/wacom.h
+++ b/drivers/hid/wacom.h
@@ -150,6 +150,7 @@ struct wacom_remote {
 		struct input_dev *input;
 		bool registered;
 		struct wacom_battery battery;
+		ktime_t active_time;
 	} remotes[WACOM_MAX_REMOTES];
 };
 
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2527,6 +2527,18 @@ fail:
 	return;
 }
 
+static void wacom_remote_destroy_battery(struct wacom *wacom, int index)
+{
+	struct wacom_remote *remote = wacom->remote;
+
+	if (remote->remotes[index].battery.battery) {
+		devres_release_group(&wacom->hdev->dev,
+				     &remote->remotes[index].battery.bat_desc);
+		remote->remotes[index].battery.battery = NULL;
+		remote->remotes[index].active_time = 0;
+	}
+}
+
 static void wacom_remote_destroy_one(struct wacom *wacom, unsigned int index)
 {
 	struct wacom_remote *remote = wacom->remote;
@@ -2541,9 +2553,7 @@ static void wacom_remote_destroy_one(str
 			remote->remotes[i].registered = false;
 			spin_unlock_irqrestore(&remote->remote_lock, flags);
 
-			if (remote->remotes[i].battery.battery)
-				devres_release_group(&wacom->hdev->dev,
-						     &remote->remotes[i].battery.bat_desc);
+			wacom_remote_destroy_battery(wacom, i);
 
 			if (remote->remotes[i].group.name)
 				devres_release_group(&wacom->hdev->dev,
@@ -2551,7 +2561,6 @@ static void wacom_remote_destroy_one(str
 
 			remote->remotes[i].serial = 0;
 			remote->remotes[i].group.name = NULL;
-			remote->remotes[i].battery.battery = NULL;
 			wacom->led.groups[i].select = WACOM_STATUS_UNKNOWN;
 		}
 	}
@@ -2636,6 +2645,9 @@ static int wacom_remote_attach_battery(s
 	if (remote->remotes[index].battery.battery)
 		return 0;
 
+	if (!remote->remotes[index].active_time)
+		return 0;
+
 	if (wacom->led.groups[index].select == WACOM_STATUS_UNKNOWN)
 		return 0;
 
@@ -2651,6 +2663,7 @@ static void wacom_remote_work(struct wor
 {
 	struct wacom *wacom = container_of(work, struct wacom, remote_work);
 	struct wacom_remote *remote = wacom->remote;
+	ktime_t kt = ktime_get();
 	struct wacom_remote_data data;
 	unsigned long flags;
 	unsigned int count;
@@ -2677,6 +2690,10 @@ static void wacom_remote_work(struct wor
 		serial = data.remote[i].serial;
 		if (data.remote[i].connected) {
 
+			if (kt - remote->remotes[i].active_time > WACOM_REMOTE_BATTERY_TIMEOUT
+			    && remote->remotes[i].active_time != 0)
+				wacom_remote_destroy_battery(wacom, i);
+
 			if (remote->remotes[i].serial == serial) {
 				wacom_remote_attach_battery(wacom, i);
 				continue;
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1129,6 +1129,7 @@ static int wacom_remote_irq(struct wacom
 	if (index < 0 || !remote->remotes[index].registered)
 		goto out;
 
+	remote->remotes[i].active_time = ktime_get();
 	input = remote->remotes[index].input;
 
 	input_report_key(input, BTN_0, (data[9] & 0x01));
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -13,6 +13,7 @@
 #define WACOM_NAME_MAX		64
 #define WACOM_MAX_REMOTES	5
 #define WACOM_STATUS_UNKNOWN	255
+#define WACOM_REMOTE_BATTERY_TIMEOUT	21000000000ll
 
 /* packet length for individual models */
 #define WACOM_PKGLEN_BBFUN	 9

[PATCH 6.1 17/31] staging: rtl8712: fix race condition

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nam Cao <namcaov@gmail.com>

commit 1422b526fba994cf05fd288a152106563b875fce upstream.

In probe function, request_firmware_nowait() is called to load firmware
asynchronously. At completion of firmware loading, register_netdev() is
called. However, a mutex needed by netdev is initialized after the call
to request_firmware_nowait(). Consequently, it can happen that
register_netdev() is called before the driver is ready.

Move the mutex initialization into r8712_init_drv_sw(), which is called
before request_firmware_nowait().

Reported-by: syzbot+b08315e8cf5a78eed03c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-staging/000000000000d9d4560601b8e0d7@google.com/T/#u
Fixes: 8c213fa59199 ("staging: r8712u: Use asynchronous firmware loading")
Cc: stable <stable@kernel.org>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20230731110620.116562-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8712/os_intfs.c |    1 +
 drivers/staging/rtl8712/usb_intf.c |    1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/rtl8712/os_intfs.c
+++ b/drivers/staging/rtl8712/os_intfs.c
@@ -323,6 +323,7 @@ int r8712_init_drv_sw(struct _adapter *p
 	mp871xinit(padapter);
 	init_default_value(padapter);
 	r8712_InitSwLeds(padapter);
+	mutex_init(&padapter->mutex_start);
 	return ret;
 }
 
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -567,7 +567,6 @@ static int r871xu_drv_init(struct usb_in
 	if (rtl871x_load_fw(padapter))
 		goto deinit_drv_sw;
 	init_completion(&padapter->rx_filter_ready);
-	mutex_init(&padapter->mutex_start);
 	return 0;
 
 deinit_drv_sw:

[PATCH 6.1 18/31] Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zheng Wang <zyytlz.wz@163.com>

commit 73f7b171b7c09139eb3c6a5677c200dc1be5f318 upstream.

In btsdio_probe, the data->work is bound with btsdio_work. It will be
started in btsdio_send_frame.

If the btsdio_remove runs with a unfinished work, there may be a race
condition that hdev is freed but used in btsdio_work. Fix it by
canceling the work before do cleanup in btsdio_remove.

Fixes: CVE-2023-1989
Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
[ Denis: Added CVE-2023-1989 and fixes tags. ]
Signed-off-by: Denis Efremov (Oracle) <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btsdio.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -357,6 +357,7 @@ static void btsdio_remove(struct sdio_fu
 	if (!data)
 		return;
 
+	cancel_work_sync(&data->work);
 	hdev = data->hdev;
 
 	sdio_set_drvdata(func, NULL);

[PATCH 6.1 19/31] wifi: mt76: mt7921: do not support one stream on secondary antenna only

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Deren Wu <deren.wu@mediatek.com>

commit d616d3680264beb9a9d2c4fc681064b06f447eeb upstream.

mt7921 support following antenna combiantions only.
* primary + secondary (2x2)
* primary only        (1x1)

Since we cannot work on secondary antenna only, return error if the
antenna bitmap is 0x2 in .set_antenna().

For example:
iw phy0 set antenna 3 3 /* valid */
iw phy0 set antenna 1 1 /* valid */
iw phy0 set antenna 2 2 /* invalid */

Cc: stable@vger.kernel.org
Fixes: e0f9fdda81bd ("mt76: mt7921: add ieee80211_ops")
Suggested-by: Knox Chiou <knoxchiou@google.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -1280,7 +1280,7 @@ mt7921_set_antenna(struct ieee80211_hw *
 		return -EINVAL;
 
 	if ((BIT(hweight8(tx_ant)) - 1) != tx_ant)
-		tx_ant = BIT(ffs(tx_ant) - 1) - 1;
+		return -EINVAL;
 
 	mt7921_mutex_acquire(dev);
 

[PATCH 6.1 20/31] wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Deren Wu <deren.wu@mediatek.com>

commit b642f4c5f3de0a8f47808d32b1ebd9c427a42a66 upstream.

txs may be dropped if the frame is aggregated in AMSDU. When the problem
shows up, some SKBs would be hold in driver to cause network stopped
temporarily. Even if the problem can be recovered by txs timeout handling,
mt7921 still need to disable txs in AMSDU to avoid this issue.

Cc: stable@vger.kernel.org
Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support")
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
@@ -465,6 +465,7 @@ void mt76_connac2_mac_write_txwi(struct
 				    BSS_CHANGED_BEACON_ENABLED));
 	bool inband_disc = !!(changed & (BSS_CHANGED_UNSOL_BCAST_PROBE_RESP |
 					 BSS_CHANGED_FILS_DISCOVERY));
+	bool amsdu_en = wcid->amsdu;
 
 	if (vif) {
 		struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv;
@@ -524,12 +525,14 @@ void mt76_connac2_mac_write_txwi(struct
 	txwi[4] = 0;
 
 	val = FIELD_PREP(MT_TXD5_PID, pid);
-	if (pid >= MT_PACKET_ID_FIRST)
+	if (pid >= MT_PACKET_ID_FIRST) {
 		val |= MT_TXD5_TX_STATUS_HOST;
+		amsdu_en = amsdu_en && !is_mt7921(dev);
+	}
 
 	txwi[5] = cpu_to_le32(val);
 	txwi[6] = 0;
-	txwi[7] = wcid->amsdu ? cpu_to_le32(MT_TXD7_HW_AMSDU) : 0;
+	txwi[7] = amsdu_en ? cpu_to_le32(MT_TXD7_HW_AMSDU) : 0;
 
 	if (is_8023)
 		mt76_connac2_mac_write_txwi_8023(txwi, skb, wcid);

[PATCH 6.1 21/31] serial: qcom-geni: fix opp vote on shutdown

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan+linaro@kernel.org>

commit 8ece7b754bc34ffd7fcc8269ccb9128e72ca76d8 upstream.

The operating-performance-point vote needs to be dropped when shutting
down the port to avoid wasting power by keeping resources like power
domains in an unnecessarily high performance state (e.g. when a UART
connected Bluetooth controller is not in use).

Fixes: a5819b548af0 ("tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state")
Cc: stable@vger.kernel.org      # 5.9
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230714130214.14552-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/qcom_geni_serial.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -129,6 +129,7 @@ struct qcom_geni_serial_port {
 	u32 tx_fifo_width;
 	u32 rx_fifo_depth;
 	bool setup;
+	unsigned long clk_rate;
 	int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
 	unsigned int baud;
 	void *rx_fifo;
@@ -1061,6 +1062,7 @@ static void qcom_geni_serial_set_termios
 			baud * sampling_rate, clk_rate, clk_div);
 
 	uport->uartclk = clk_rate;
+	port->clk_rate = clk_rate;
 	dev_pm_opp_set_rate(uport->dev, clk_rate);
 	ser_clk_cfg = SER_CLK_EN;
 	ser_clk_cfg |= clk_div << CLK_DIV_SHFT;
@@ -1330,10 +1332,13 @@ static void qcom_geni_serial_pm(struct u
 
 	if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) {
 		geni_icc_enable(&port->se);
+		if (port->clk_rate)
+			dev_pm_opp_set_rate(uport->dev, port->clk_rate);
 		geni_se_resources_on(&port->se);
 	} else if (new_state == UART_PM_STATE_OFF &&
 			old_state == UART_PM_STATE_ON) {
 		geni_se_resources_off(&port->se);
+		dev_pm_opp_set_rate(uport->dev, 0);
 		geni_icc_disable(&port->se);
 	}
 }

[PATCH 6.1 22/31] serial: sc16is7xx: fix broken port 0 uart init

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

commit 2861ed4d6e6d1a2c9de9bf5b0abd996c2dc673d0 upstream.

The sc16is7xx_config_rs485() function is called only for the second
port (index 1, channel B), causing initialization problems for the
first port.

For the sc16is7xx driver, port->membase and port->mapbase are not set,
and their default values are 0. And we set port->iobase to the device
index. This means that when the first device is registered using the
uart_add_one_port() function, the following values will be in the port
structure:
    port->membase = 0
    port->mapbase = 0
    port->iobase  = 0

Therefore, the function uart_configure_port() in serial_core.c will
exit early because of the following check:
	/*
	 * If there isn't a port here, don't do anything further.
	 */
	if (!port->iobase && !port->mapbase && !port->membase)
		return;

Typically, I2C and SPI drivers do not set port->membase and
port->mapbase.

The max310x driver sets port->membase to ~0 (all ones). By
implementing the same change in this driver, uart_configure_port() is
now correctly executed for all ports.

Fixes: dfeae619d781 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sc16is7xx.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1439,6 +1439,12 @@ static int sc16is7xx_probe(struct device
 		s->p[i].port.fifosize	= SC16IS7XX_FIFO_SIZE;
 		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
 		s->p[i].port.iobase	= i;
+		/*
+		 * Use all ones as membase to make sure uart_configure_port() in
+		 * serial_core.c does not abort for SPI/I2C devices where the
+		 * membase address is not applicable.
+		 */
+		s->p[i].port.membase	= (void __iomem *)~0;
 		s->p[i].port.iotype	= UPIO_PORT;
 		s->p[i].port.uartclk	= freq;
 		s->p[i].port.rs485_config = sc16is7xx_config_rs485;

[PATCH 6.1 23/31] serial: sc16is7xx: fix bug when first setting GPIO direction

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

commit 9baeea723c0fb9c3ba9a336369f758ed9bc6831d upstream.

When configuring a pin as an output pin with a value of logic 0, we
end up as having a value of logic 1 on the output pin. Setting a
logic 0 a second time (or more) after that will correctly output a
logic 0 on the output pin.

By default, all GPIO pins are configured as inputs. When we enter
sc16is7xx_gpio_direction_output() for the first time, we first set the
desired value in IOSTATE, and then we configure the pin as an output.
The datasheet states that writing to IOSTATE register will trigger a
transfer of the value to the I/O pin configured as output, so if the
pin is configured as an input, nothing will be transferred.

Therefore, set the direction first in IODIR, and then set the desired
value in IOSTATE.

This is what is done in NXP application note AN10587.

Fixes: dfeae619d781 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sc16is7xx.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1345,9 +1345,18 @@ static int sc16is7xx_gpio_direction_outp
 		state |= BIT(offset);
 	else
 		state &= ~BIT(offset);
-	sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
+
+	/*
+	 * If we write IOSTATE first, and then IODIR, the output value is not
+	 * transferred to the corresponding I/O pin.
+	 * The datasheet states that each register bit will be transferred to
+	 * the corresponding I/O pin programmed as output when writing to
+	 * IOSTATE. Therefore, configure direction first with IODIR, and then
+	 * set value after with IOSTATE.
+	 */
 	sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
 			      BIT(offset));
+	sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
 
 	return 0;
 }

[PATCH 6.1 24/31] firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wang Ming <machel@vivo.com>

commit dd218433f2b635d97e8fda3eed047151fd528ce4 upstream.

The devm_memremap() function returns error pointers.
It never returns NULL. Fix the check.

Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wang Ming <machel@vivo.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20230727193750.983795-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/stratix10-svc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -756,7 +756,7 @@ svc_create_memory_pool(struct platform_d
 	paddr = begin;
 	size = end - begin;
 	va = devm_memremap(dev, paddr, size, MEMREMAP_WC);
-	if (!va) {
+	if (IS_ERR(va)) {
 		dev_err(dev, "fail to remap shared memory\n");
 		return ERR_PTR(-EINVAL);
 	}

[PATCH 6.1 25/31] fsi: master-ast-cf: Add MODULE_FIRMWARE macro

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Juerg Haefliger <juerg.haefliger@canonical.com>

commit 3a1d7aff6e65ad6e285e28abe55abbfd484997ee upstream.

The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.

Fixes: 6a794a27daca ("fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire")
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Link: https://lore.kernel.org/r/20230628095039.26218-1-juerg.haefliger@canonical.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/fsi/fsi-master-ast-cf.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/fsi/fsi-master-ast-cf.c
+++ b/drivers/fsi/fsi-master-ast-cf.c
@@ -1441,3 +1441,4 @@ static struct platform_driver fsi_master
 
 module_platform_driver(fsi_master_acf);
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FW_FILE_NAME);

[PATCH 6.1 26/31] tcpm: Avoid soft reset when partner does not support get_status

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Badhri Jagan Sridharan <badhri@google.com>

commit 78e0ea4277546debf7e96797ac3b768539cc44f6 upstream.

When partner does not support get_status message, tcpm right now
responds with soft reset message. This causes PD renegotiation to
happen and resets PPS link. Avoid soft resetting the link when
partner does not support get_status message to mitigate PPS resets.

[  208.926752] Setting voltage/current limit 9500 mV 2450 mA
[  208.930407] set_auto_vbus_discharge_threshold mode:3 pps_active:y vbus:9500 ret:0
[  208.930418] state change SNK_TRANSITION_SINK -> SNK_READY [rev3 POWER_NEGOTIATION]
[  208.930455] AMS POWER_NEGOTIATION finished

// ALERT message from the Source
[  213.948442] PD RX, header: 0x19a6 [1]
[  213.948451] state change SNK_READY -> GET_STATUS_SEND [rev3 GETTING_SOURCE_SINK_STATUS]
[  213.948457] PD TX, header: 0x492
[  213.950402] PD TX complete, status: 0
[  213.950427] pending state change GET_STATUS_SEND -> GET_STATUS_SEND_TIMEOUT @ 60 ms [rev3 GETTING_SOURCE_SINK_STATUS]

// NOT_SUPPORTED from the Source
[  213.959954] PD RX, header: 0xbb0 [1]

// sink sends SOFT_RESET
[  213.959958] state change GET_STATUS_SEND -> SNK_SOFT_RESET [rev3 GETTING_SOURCE_SINK_STATUS]
[  213.959962] AMS GETTING_SOURCE_SINK_STATUS finished
[  213.959964] AMS SOFT_RESET_AMS start
[  213.959966] state change SNK_SOFT_RESET -> AMS_START [rev3 SOFT_RESET_AMS]
[  213.959969] state change AMS_START -> SOFT_RESET_SEND [rev3 SOFT_RESET_AMS]

Cc: stable@vger.kernel.org
Fixes: 8dea75e11380 ("usb: typec: tcpm: Protocol Error handling")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230820044449.1005889-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/tcpm/tcpm.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2747,6 +2747,13 @@ static void tcpm_pd_ctrl_request(struct
 			port->sink_cap_done = true;
 			tcpm_set_state(port, ready_state(port), 0);
 			break;
+		/*
+		 * Some port partners do not support GET_STATUS, avoid soft reset the link to
+		 * prevent redundant power re-negotiation
+		 */
+		case GET_STATUS_SEND:
+			tcpm_set_state(port, ready_state(port), 0);
+			break;
 		case SRC_READY:
 		case SNK_READY:
 			if (port->vdm_state > VDM_STATE_READY) {

[PATCH 6.1 27/31] dt-bindings: sc16is7xx: Add property to change GPIO function

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

commit 4cf478dc5d707e56aefa258c049872eff054a353 upstream.

Some variants in this series of UART controllers have GPIO pins that
are shared between GPIO and modem control lines.

The pin mux mode (GPIO or modem control lines) can be set for each
ports (channels) supported by the variant.

This adds a property to the device tree to set the GPIO pin mux to
modem control lines on selected ports if needed.

Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230807214556.540627-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 .../bindings/serial/nxp,sc16is7xx.txt         | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
index 0fa8e3e43bf8..1a7e4bff0456 100644
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -23,6 +23,9 @@ Optional properties:
     1 = active low.
 - irda-mode-ports: An array that lists the indices of the port that
 		   should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+				should have shared GPIO lines configured as
+				modem control lines.
 
 Example:
         sc16is750: sc16is750@51 {
@@ -35,6 +38,26 @@ Example:
                 #gpio-cells = <2>;
         };
 
+	sc16is752: sc16is752@53 {
+		compatible = "nxp,sc16is752";
+		reg = <0x53>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+		gpio-controller; /* Port 0 as GPIOs */
+		#gpio-cells = <2>;
+	};
+
+	sc16is752: sc16is752@54 {
+		compatible = "nxp,sc16is752";
+		reg = <0x54>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+	};
+
 * spi as bus
 
 Required properties:
@@ -59,6 +82,9 @@ Optional properties:
     1 = active low.
 - irda-mode-ports: An array that lists the indices of the port that
 		   should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+				should have shared GPIO lines configured as
+				modem control lines.
 
 Example:
 	sc16is750: sc16is750@0 {
@@ -70,3 +96,23 @@ Example:
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	sc16is752: sc16is752@1 {
+		compatible = "nxp,sc16is752";
+		reg = <1>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+		gpio-controller; /* Port 0 as GPIOs */
+		#gpio-cells = <2>;
+	};
+
+	sc16is752: sc16is752@2 {
+		compatible = "nxp,sc16is752";
+		reg = <2>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+	};
-- 
2.42.0

[PATCH 6.1 28/31] nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit f83913f8c5b882a312e72b7669762f8a5c9385e4 upstream.

A syzbot stress test reported that create_empty_buffers() called from
nilfs_lookup_dirty_data_buffers() can cause a general protection fault.

Analysis using its reproducer revealed that the back reference "mapping"
from a page/folio has been changed to NULL after dirty page/folio gang
lookup in nilfs_lookup_dirty_data_buffers().

Fix this issue by excluding pages/folios from being collected if, after
acquiring a lock on each page/folio, its back reference "mapping" differs
from the pointer to the address space struct that held the page/folio.

Link: https://lkml.kernel.org/r/20230805132038.6435-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+0ad741797f4565e7e2d2@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000002930a705fc32b231@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nilfs2/segment.c | 5 +++++
 fs/nilfs2/segment.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -725,6 +725,11 @@ static size_t nilfs_lookup_dirty_data_bu
 		struct page *page = pvec.pages[i];
 
 		lock_page(page);
+		if (unlikely(page->mapping != mapping)) {
+			/* Exclude pages removed from the address space */
+			unlock_page(page);
+			continue;
+		}
 		if (!page_has_buffers(page))
 			create_empty_buffers(page, i_blocksize(inode), 0);
 		unlock_page(page);

[PATCH 6.1 29/31] nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit cdaac8e7e5a059f9b5e816cda257f08d0abffacd upstream.

A syzbot stress test using a corrupted disk image reported that
mark_buffer_dirty() called from __nilfs_mark_inode_dirty() or
nilfs_palloc_commit_alloc_entry() may output a kernel warning, and can
panic if the kernel is booted with panic_on_warn.

This is because nilfs2 keeps buffer pointers in local structures for some
metadata and reuses them, but such buffers may be forcibly discarded by
nilfs_clear_dirty_page() in some critical situations.

This issue is reported to appear after commit 28a65b49eb53 ("nilfs2: do
not write dirty data after degenerating to read-only"), but the issue has
potentially existed before.

Fix this issue by checking the uptodate flag when attempting to reuse an
internally held buffer, and reloading the metadata instead of reusing the
buffer if the flag was lost.

Link: https://lkml.kernel.org/r/20230818131804.7758-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+cdfcae656bac88ba0e2d@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000003da75f05fdeffd12@google.com
Fixes: 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/alloc.c |    3 ++-
 fs/nilfs2/inode.c |    7 +++++--
 2 files changed, 7 insertions(+), 3 deletions(-)

--- a/fs/nilfs2/alloc.c
+++ b/fs/nilfs2/alloc.c
@@ -205,7 +205,8 @@ static int nilfs_palloc_get_block(struct
 	int ret;
 
 	spin_lock(lock);
-	if (prev->bh && blkoff == prev->blkoff) {
+	if (prev->bh && blkoff == prev->blkoff &&
+	    likely(buffer_uptodate(prev->bh))) {
 		get_bh(prev->bh);
 		*bhp = prev->bh;
 		spin_unlock(lock);
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -1025,7 +1025,7 @@ int nilfs_load_inode_block(struct inode
 	int err;
 
 	spin_lock(&nilfs->ns_inode_lock);
-	if (ii->i_bh == NULL) {
+	if (ii->i_bh == NULL || unlikely(!buffer_uptodate(ii->i_bh))) {
 		spin_unlock(&nilfs->ns_inode_lock);
 		err = nilfs_ifile_get_inode_block(ii->i_root->ifile,
 						  inode->i_ino, pbh);
@@ -1034,7 +1034,10 @@ int nilfs_load_inode_block(struct inode
 		spin_lock(&nilfs->ns_inode_lock);
 		if (ii->i_bh == NULL)
 			ii->i_bh = *pbh;
-		else {
+		else if (unlikely(!buffer_uptodate(ii->i_bh))) {
+			__brelse(ii->i_bh);
+			ii->i_bh = *pbh;
+		} else {
 			brelse(*pbh);
 			*pbh = ii->i_bh;
 		}

[PATCH 6.1 30/31] usb: typec: tcpci: clear the fault status bit

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marco Felsch <m.felsch@pengutronix.de>

commit 23e60c8daf5ec2ab1b731310761b668745fcf6ed upstream.

According the "USB Type-C Port Controller Interface Specification v2.0"
the TCPC sets the fault status register bit-7
(AllRegistersResetToDefault) once the registers have been reset to
their default values.

This triggers an alert(-irq) on PTN5110 devices albeit we do mask the
fault-irq, which may cause a kernel hang. Fix this generically by writing
a one to the corresponding bit-7.

Cc: stable@vger.kernel.org
Fixes: 74e656d6b055 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Reported-by: "Angus Ainslie (Purism)" <angus@akkea.ca>
Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@akkea.ca/
Reported-by: Christian Bach <christian.bach@scs.ch>
Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@ZR0P278MB0773.CHEP278.PROD.OUTLOOK.COM/t/
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/tcpm/tcpci.c |    4 ++++
 include/linux/usb/tcpci.h      |    1 +
 2 files changed, 5 insertions(+)

--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -593,6 +593,10 @@ static int tcpci_init(struct tcpc_dev *t
 	if (time_after(jiffies, timeout))
 		return -ETIMEDOUT;
 
+	ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT);
+	if (ret < 0)
+		return ret;
+
 	/* Handle vendor init */
 	if (tcpci->data->init) {
 		ret = tcpci->data->init(tcpci, tcpci->data);
--- a/include/linux/usb/tcpci.h
+++ b/include/linux/usb/tcpci.h
@@ -103,6 +103,7 @@
 #define TCPC_POWER_STATUS_SINKING_VBUS	BIT(0)
 
 #define TCPC_FAULT_STATUS		0x1f
+#define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7)
 
 #define TCPC_ALERT_EXTENDED		0x21
 

[PATCH 6.1 31/31] pinctrl: amd: Dont show `Invalid config param` errors

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <mario.limonciello@amd.com>

commit 87b549efcb0f7934b0916d2a00607a878b6f1e0f upstream.

On some systems amd_pinconf_set() is called with parameters
0x8 (PIN_CONFIG_DRIVE_PUSH_PULL) or 0x14 (PIN_CONFIG_PERSIST_STATE)
which are not supported by pinctrl-amd.

Don't show an err message when called with an invalid parameter,
downgrade this to debug instead.

Cc: stable@vger.kernel.org # 6.1
Fixes: 635a750d958e1 ("pinctrl: amd: Use amd_pinconf_set() for all config options")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230717201652.17168-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/pinctrl-amd.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -748,7 +748,7 @@ static int amd_pinconf_get(struct pinctr
 		break;
 
 	default:
-		dev_err(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
+		dev_dbg(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
 			param);
 		return -ENOTSUPP;
 	}
@@ -798,7 +798,7 @@ static int amd_pinconf_set(struct pinctr
 			break;
 
 		default:
-			dev_err(&gpio_dev->pdev->dev,
+			dev_dbg(&gpio_dev->pdev->dev,
 				"Invalid config param %04x\n", param);
 			ret = -ENOTSUPP;
 		}

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Joel Fernandes]

On Mon, Sep 04, 2023 at 07:30:08PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.

For RCU,
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>

thanks,

 - Joel

> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:
> 
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>     Linux 6.1.52-rc1
> 
> Mario Limonciello <mario.limonciello@amd.com>
>     pinctrl: amd: Don't show `Invalid config param` errors
> 
> Marco Felsch <m.felsch@pengutronix.de>
>     usb: typec: tcpci: clear the fault status bit
> 
> Ryusuke Konishi <konishi.ryusuke@gmail.com>
>     nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
> 
> Ryusuke Konishi <konishi.ryusuke@gmail.com>
>     nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
> 
> Hugo Villeneuve <hvilleneuve@dimonoff.com>
>     dt-bindings: sc16is7xx: Add property to change GPIO function
> 
> Badhri Jagan Sridharan <badhri@google.com>
>     tcpm: Avoid soft reset when partner does not support get_status
> 
> Juerg Haefliger <juerg.haefliger@canonical.com>
>     fsi: master-ast-cf: Add MODULE_FIRMWARE macro
> 
> Wang Ming <machel@vivo.com>
>     firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe
> 
> Hugo Villeneuve <hvilleneuve@dimonoff.com>
>     serial: sc16is7xx: fix bug when first setting GPIO direction
> 
> Hugo Villeneuve <hvilleneuve@dimonoff.com>
>     serial: sc16is7xx: fix broken port 0 uart init
> 
> Johan Hovold <johan+linaro@kernel.org>
>     serial: qcom-geni: fix opp vote on shutdown
> 
> Deren Wu <deren.wu@mediatek.com>
>     wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU
> 
> Deren Wu <deren.wu@mediatek.com>
>     wifi: mt76: mt7921: do not support one stream on secondary antenna only
> 
> Zheng Wang <zyytlz.wz@163.com>
>     Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
> 
> Nam Cao <namcaov@gmail.com>
>     staging: rtl8712: fix race condition
> 
> Aaron Armstrong Skomra <aaron.skomra@wacom.com>
>     HID: wacom: remove the battery when the EKR is off
> 
> Xu Yang <xu.yang_2@nxp.com>
>     usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0
> 
> Luke Lu <luke.lu@libre.computer>
>     usb: dwc3: meson-g12a: do post init to fix broken usb after resumption
> 
> Takashi Iwai <tiwai@suse.de>
>     ALSA: usb-audio: Fix init call orders for UAC1
> 
> Slark Xiao <slark_xiao@163.com>
>     USB: serial: option: add FOXCONN T99W368/T99W373 product
> 
> Martin Kohn <m.kohn@welotec.com>
>     USB: serial: option: add Quectel EM05G variant (0x030e)
> 
> Christoph Hellwig <hch@lst.de>
>     modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
> 
> Christoph Hellwig <hch@lst.de>
>     rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
> 
> Christoph Hellwig <hch@lst.de>
>     net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
> 
> Christoph Hellwig <hch@lst.de>
>     mmc: au1xmmc: force non-modular build and remove symbol_get usage
> 
> Arnd Bergmann <arnd@arndb.de>
>     ARM: pxa: remove use of symbol_get()
> 
> Namjae Jeon <linkinjeon@kernel.org>
>     ksmbd: reduce descriptor size if remaining bytes is less than request size
> 
> Namjae Jeon <linkinjeon@kernel.org>
>     ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
> 
> Namjae Jeon <linkinjeon@kernel.org>
>     ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()
> 
> Namjae Jeon <linkinjeon@kernel.org>
>     ksmbd: fix wrong DataOffset validation of create context
> 
> Gao Xiang <xiang@kernel.org>
>     erofs: ensure that the post-EOF tails are all zeroed
> 
> 
> -------------
> 
> Diffstat:
> 
>  .../devicetree/bindings/serial/nxp,sc16is7xx.txt   | 46 ++++++++++++++++++++++
>  Makefile                                           |  4 +-
>  arch/arm/mach-pxa/sharpsl_pm.c                     |  2 -
>  arch/arm/mach-pxa/spitz.c                          | 14 +------
>  arch/mips/alchemy/devboards/db1000.c               |  8 +---
>  arch/mips/alchemy/devboards/db1200.c               | 19 +--------
>  arch/mips/alchemy/devboards/db1300.c               | 10 +----
>  drivers/bluetooth/btsdio.c                         |  1 +
>  drivers/firmware/stratix10-svc.c                   |  2 +-
>  drivers/fsi/fsi-master-ast-cf.c                    |  1 +
>  drivers/hid/wacom.h                                |  1 +
>  drivers/hid/wacom_sys.c                            | 25 ++++++++++--
>  drivers/hid/wacom_wac.c                            |  1 +
>  drivers/hid/wacom_wac.h                            |  1 +
>  drivers/mmc/host/Kconfig                           |  5 ++-
>  drivers/net/ethernet/freescale/enetc/enetc_ptp.c   |  2 +-
>  .../net/wireless/mediatek/mt76/mt76_connac_mac.c   |  7 +++-
>  drivers/net/wireless/mediatek/mt76/mt7921/main.c   |  2 +-
>  drivers/pinctrl/pinctrl-amd.c                      |  4 +-
>  drivers/rtc/rtc-ds1685.c                           |  2 +-
>  drivers/staging/rtl8712/os_intfs.c                 |  1 +
>  drivers/staging/rtl8712/usb_intf.c                 |  1 -
>  drivers/tty/serial/qcom_geni_serial.c              |  5 +++
>  drivers/tty/serial/sc16is7xx.c                     | 17 +++++++-
>  drivers/usb/chipidea/ci_hdrc_imx.c                 | 10 +++--
>  drivers/usb/chipidea/usbmisc_imx.c                 |  6 ++-
>  drivers/usb/dwc3/dwc3-meson-g12a.c                 |  6 +++
>  drivers/usb/serial/option.c                        |  7 ++++
>  drivers/usb/typec/tcpm/tcpci.c                     |  4 ++
>  drivers/usb/typec/tcpm/tcpm.c                      |  7 ++++
>  fs/erofs/zdata.c                                   |  2 +
>  fs/nilfs2/alloc.c                                  |  3 +-
>  fs/nilfs2/inode.c                                  |  7 +++-
>  fs/nilfs2/segment.c                                |  5 +++
>  fs/smb/server/auth.c                               |  3 ++
>  fs/smb/server/oplock.c                             |  2 +-
>  fs/smb/server/smb2pdu.c                            |  2 +-
>  fs/smb/server/smb2pdu.h                            |  2 +-
>  fs/smb/server/transport_rdma.c                     | 25 ++++++++----
>  include/linux/usb/tcpci.h                          |  1 +
>  kernel/module/main.c                               | 14 +++++--
>  sound/usb/stream.c                                 | 11 +++++-
>  42 files changed, 209 insertions(+), 89 deletions(-)
> 
> 

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 558 bytes --]

On Mon, Sep 04, 2023 at 07:30:08PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully compiled and installed bindeb-pkgs on my computer (Acer
Aspire E15, Intel Core i3 Haswell). No noticeable regressions.

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Naresh Kamboju]

On Tue, 5 Sept 2023 at 00:05, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.52-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 6.1.52-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-6.1.y
* git commit: d0abe9b6003aae74696bf546c325193113e4b56e
* git describe: v6.1.51-32-gd0abe9b6003a
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.51-32-gd0abe9b6003a

## Test Regressions (compared to v6.1.51)

## Metric Regressions (compared to v6.1.51)

## Test Fixes (compared to v6.1.51)

## Metric Fixes (compared to v6.1.51)

## Test result summary
total: 123742, pass: 105963, fail: 2366, skip: 15262, xfail: 151

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 146 total, 144 passed, 2 failed
* arm64: 52 total, 49 passed, 3 failed
* i386: 40 total, 38 passed, 2 failed
* mips: 30 total, 28 passed, 2 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 37 total, 35 passed, 2 failed
* riscv: 14 total, 12 passed, 2 failed
* s390: 15 total, 13 passed, 2 failed
* sh: 14 total, 12 passed, 2 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 46 total, 42 passed, 4 failed

## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-user_events
* kselftest-vDSO
* kselftest-vm
* kselftest-watchdog
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Sudip Mukherjee (Codethink)]

Hi Greg,

On Mon, Sep 04, 2023 at 07:30:08PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Build test (gcc version 12.3.1 20230829):
mips: 52 configs -> no failure
arm: 100 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
csky allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]

[1]. https://openqa.qa.codethink.co.uk/tests/4936
[2]. https://openqa.qa.codethink.co.uk/tests/4952
[3]. https://openqa.qa.codethink.co.uk/tests/4951

Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

-- 
Regards
Sudip

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Takeshi Ogasawara]

Hi Greg

On Tue, Sep 5, 2023 at 3:35 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.52-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

6.1.52-rc1 tested.

Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.

Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)

Thanks

Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Jon Hunter]

On Mon, 04 Sep 2023 19:30:08 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.1:
    11 builds:	11 pass, 0 fail
    28 boots:	28 pass, 0 fail
    130 tests:	130 pass, 0 fail

Linux version:	6.1.52-rc1-gd0abe9b6003a
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Florian Fainelli]

On 9/4/2023 11:30 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Shuah Khan]

On 9/4/23 12:30, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Ron Economos]

On 9/4/23 11:30 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[SeongJae Park]

Hello,

On Mon, 4 Sep 2023 19:30:08 +0100 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.

This rc kernel passes DAMON functionality test[1] on my test machine.
Attaching the test results summary below.  Please note that I retrieved the
kernel from linux-stable-rc tree[2].

Tested-by: SeongJae Park <sj@kernel.org>

[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] d0abe9b6003a ("Linux 6.1.52-rc1")

Thanks,
SJ

[...]

---

ok 1 selftests: damon: debugfs_attrs.sh
ok 2 selftests: damon: debugfs_schemes.sh
ok 3 selftests: damon: debugfs_target_ids.sh
ok 4 selftests: damon: debugfs_empty_targets.sh
ok 5 selftests: damon: debugfs_huge_count_read_write.sh
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh
ok 7 selftests: damon: sysfs.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh
ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_m68k.sh
ok 12 selftests: damon-tests: build_arm64.sh
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh

PASS

Re: [PATCH 6.1 00/31] 6.1.52-rc1 review

[Guenter Roeck]

On Mon, Sep 04, 2023 at 07:30:08PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.52 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 Sep 2023 18:29:29 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 523 pass: 523 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter