* [PATCH v24 00/21] s390x: CPU Topology
@ 2023-09-26 12:15 Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 01/21] qapi: machine.json: change docs regarding CpuInstanceProperties Nina Schoetterl-Glausch
` (20 more replies)
0 siblings, 21 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal
Changes since v23 (range-diff below):
* qapi documentation changes (thanks Markus)
* avoid compiler warning about multiplication in bool expression
Changes since v22:
* fix compile issues (thanks Thomas, Cédric)
* incorporate feedback (thanks Thomas!), most notably
* forbid books and drawers in older machine types
* changed implementation of TLE entry ordering
* also got rid of another ERRP_GUARD in s390_change_topology
* pick up R-b's (thanks Thomas)
* misc minor stuff
Changes since v21:
* fix ordering of entries in topology list
* don't leak topology list on error condition in insert_stsi_15_1_x
* make entitlement, dedication optional in query-cpu-info-fast
* rename query-cpu-polarization to query-s390x-cpu-polarization
* documentation changes
* add tests of guest view to avocado tests
* require KVM in avocado tests
* increase timeout in tests
* bump version in comments documenting availability to 8.2
* rename some symbols
* picked up R-b's (thanks Thomas)
* minor stuff, typos
Implementation discussions
==========================
CPU models
----------
Since the facility 11, S390_FEAT_CONFIGURATION_TOPOLOGY is already
in the CPU model for old QEMU we could not activate it as usual from
KVM but needed a KVM capability: KVM_CAP_S390_CPU_TOPOLOGY.
Checking and enabling this capability enables facility 11,
S390_FEAT_CONFIGURATION_TOPOLOGY.
It is the responsibility of the admin to ensure the same CPU
model for source and target host in a migration.
Migration
---------
When the target guest is started, the Multi-processor Topology Change
Report (MTCR) bit is set during the creation of the vCPU by KVM.
We do not need to migrate its state, in the worst case, the target
guest will see the MTCR and actualize its view of the topology
without necessity, but this will be done only one time.
Reset
-----
Reseting the topology is done during subsystem reset, the
polarization is reset to horizontal polarization.
Topology attributes
-------------------
The topology attributes are carried by the CPU object and defined
on object creation.
In the case the new attributes, socket, book, drawer, dedicated,
entitlement are not provided QEMU provides defaults values.
- Geometry defaults
The geometry default are based on the core-id of the core to
fill the geometry in a monotone way starting with drawer 0,
book 0, and filling socket 0 with the number of cores per socket,
then filling socket 1, socket 2 ... etc until the book is complete
and all books until the first drawer is complete before starting with
the next drawer.
This allows to keep existing start scripts and Libvirt existing
interface until it is extended.
- Modifiers defaults
Default entitlement is medium
Default dedication is not dedicated.
- Machine polarization default to horizontal
Dynamic topology modification
-----------------------------
QAPI interface is extended with:
- a command: 'set-cpu-topology'
- a query: 'query-cpu-polarization'
- a query: extension of qmp 'query-cpus-fast'
- a query: extension of hmp 'hotpluggable-cpus'
- an event: 'CPU_POLARITY_CHANGE'
New command and interface are specified as unstable.
The admin may use query-cpus-fast to verify the topology provided
to the guest and set-cpu-topology to modify it.
The event CPU_POLARITY_CHANGE is sent when the guest successfuly
uses the PTF(2) instruction to request a polarization change.
In that case, the admin is supposed to modify the CPU provisioning
accordingly.
Testing
=======
To use the QEMU patches, you will need Linux V6-rc1 or newer,
or use the following Linux mainline patches:
f5ecfee94493 2022-07-20 KVM: s390: resetting the Topology-Change-Report
24fe0195bc19 2022-07-20 KVM: s390: guest support for topology function
0130337ec45b 2022-07-20 KVM: s390: Cleanup ipte lock access and SIIF fac..
Currently this code is for KVM only, I have no idea if it is interesting
to provide a TCG patch. If ever it will be done in another series.
This series provide 12 avocado tests using Fedora-35 kernel and initrd
image.
Documentation
=============
To have a better understanding of the S390x CPU Topology and its
implementation in QEMU you can have a look at the documentation in the
last patch of this series.
The admin will want to match the host and the guest topology, taking
into account that the guest does not recognize multithreading.
Consequently, two vCPU assigned to threads of the same real CPU should
preferably be assigned to the same socket of the guest machine.
Previous changes:
Since v20:
- changed name of target/s390/kvm/cpu_topology to
target/s390/kvm/stsi-topology
(Thomas, Cedric)
- moved the TLE list head from a global to a local in
insert_stsi_15_1_x()
(Nina)
- cleaning and merging some of the avocado tests
(Nina)
- Several cleanings
(Cedric, Thomas, Nina)
- moved setting of entitlement and dedicated from disapeared
cpustate_to_cpuinfo_s390() to new s390_query_cpu_fast()
- small changes to documentation to reflect last changes using
enum instead of int for polarization.
0 -> horizontal and 1 -> vertical
Since v19:
- use enum to specify the entitlement
(Nina)
- Change default entitlement to "auto"
- suppress skip_basis in avocado tests
(after comment from Cedric)
- Correction of the documentation
(Cedric)
- better code organization for s390_topology_add_core_to_socket
and s390_socket_nb
(Cedric)
- Changed Copyright to respect IBM policy
(Nina)
- set vertical_polarization back into s390_topology
(Nina)
Since v18:
- Changed default entitlement to S390_CPU_ENTITLEMENT__MAX
because no default can be correct.
- added polarization entry to the S390CcwMachineState
which allow to suppress shadow entitlement
- Suppress shadow entitlement
(Nina)
- Added query-cpu-polarization
- Added more avocado tests
- modified cpu_hierarchy_to_string to look better
(Nina)
Since v17:
- bug correction in handling PTF
- added avocado tests
(Thomas)
- Change comments on QEMU machine to 8.1
Since v16:
- documentation, split, bug correction and rephrasing
(Nina, Thomas)
- create machine-common.json
- use of entitlement_shadow to keep track of the entitlement
- adding drawers and books to query-hotpluggable-cpus
- keep hmp interface for set-cpu-topology for a future series
Since v15:
- Use Enum for polarity and entitlement
(Nina)
- move kvm_vm_enable_cap(KVM_CAP_S390_CPU_TOPOLOGY) to
kvm_arch_init()
(Thomas)
- Make all CPU attributes optional for set-cpu-topology monitor
command
(Thomas, Nina)
- Change use of the prefix "x-" to the use of feature unstable
to declare set-cpu-topology as unstable.
(Nina)
- Make CPU_POLARITY_CHANGE even as unstable
(Nina)
- Documentation update
(Thomas, Nina)
Since v14:
- move the ordering of TLE to just before filling the SYSIB,
optimize TLE ordering to be done on need only.
(Cedric in previous series)
- remove 'query-topology' and instead extend 'query-cpus-fast'
(Daniel)
- rename POLARITY_CHANGE to CPU_POLARITY_CHANGE
(Thomas)
- Divers bugs correction and doc changes
(Thomas, Nina)
- Separate topology and entitlement, simplify pft handling
(Nina)
- add the resetting of all CPU to horizontal polarity
once implementing PTF interpretation
Since v13:
- Suppress the topology device to simplify the code
(Cedric)
- moved reset of MTCR from device reset into subsystem
reset and removed previous reviewed-by from Nico and
Janis
- No need for Migration
- No need for machine dependencies
(Christian, Thomas)
- Adding all features, drawer/book and dynamic
(Cedric)
- since v12
- suppress new CPU flag "disable-topology" just use ctop
- no use of special fields in CCW machine or in CPU
- modifications in documentation
- insert documentation in tree
(Cedric)
- moved cpu-topology.c from target/s390 to target/s390/kvm
to compile smoothly (without topology) for TCG
(Cedric)
- since v11
- new CPU flag "disable-topology"
I would have take "topology" if I was able to have
it false on default.
(Christian, Thomas)
- Build the topology during the interception of the
STSI instruction.
(Cedric)
- return CC3 in case the calculated SYSIB length is
greater than 4096.
(Janis)
- minor corections on documentation
- since v10
- change machine attribute "topology-disable" to "topology"
(Cedric)
- Add preliminary patch for machine properties
(Cedric)
- Use next machine as 7.2
(Cedric / Connie)
- Remove unecessary mutex
(Thomas)
- use ENOTSUP return value for kvm_s390_topology_set_mtcr()
(Cedric)
- Add explanation on container and cpu TLEs
(Thomas)
- use again cpu and socket count in topology structure
(Cedric)
- Suppress the S390TopoTLE structure and integrate
the TLE masks to the socket structure.
(-)
- the STSI instruction now finds the topology from the machine
(Cedric)
- since v9
- remove books and drawers
- remove thread denying and replace with a merge
of cores * threads to specify the CPUs available
to the guest
- add a class option to avoid topology on older
machines
(Cedric)
- Allocate a SYSIB buffer of the maximal length to
avoid overflow.
(Nico, Janis)
- suppress redundancy of smp parameters in topology
and use directly the machine smp structure
- Early check for topology support
(Cedric)
- since v8
- Linux patches are now mainline
- simplification of the implementation
(Janis)
- Migration, new machine definition
(Thomas)
- Documentation
- since v7
- Coherence with the Linux patch series changes for MTCR get
(Pierre)
- check return values during new CPU creation
(Thomas)
- Improving codding style and argument usages
(Thomas)
- since v6
- Changes on smp args in qemu-options
(Daniel)
- changed comments in machine.jason
(Daniel)
- Added reset
(Janosch)
- since v5
- rebasing on newer QEMU version
- reworked most lines above 80 characters.
- since v4
- Added drawer and books to topology
- Added numa topology
- Added documentation
- since v3
- Added migration
(Thomas)
- Separated STSI instruction from KVM to prepare TCG
(Thomas)
- Take care of endianess to prepare TCG
(Thomas)
- Added comments on STSI CPU container and PFT instruction
(Thomas)
- Moved enabling the instructions as the last patch
(Thomas)
Nina Schoetterl-Glausch (1):
qapi: machine.json: change docs regarding CpuInstanceProperties
Pierre Morel (20):
CPU topology: extend with s390 specifics
s390x/cpu topology: add topology entries on CPU hotplug
target/s390x/cpu topology: handle STSI(15) and build the SYSIB
s390x/sclp: reporting the maximum nested topology entries
s390x/cpu topology: resetting the Topology-Change-Report
s390x/cpu topology: interception of PTF instruction
target/s390x/cpu topology: activate CPU topology
qapi/s390x/cpu topology: set-cpu-topology qmp command
machine: adding s390 topology to query-cpu-fast
machine: adding s390 topology to info hotpluggable-cpus
qapi/s390x/cpu topology: CPU_POLARIZATION_CHANGE qapi event
qapi/s390x/cpu topology: add query-s390x-cpu-polarization command
docs/s390x/cpu topology: document s390x cpu topology
tests/avocado: s390x cpu topology core
tests/avocado: s390x cpu topology polarization
tests/avocado: s390x cpu topology entitlement tests
tests/avocado: s390x cpu topology test dedicated CPU
tests/avocado: s390x cpu topology test socket full
tests/avocado: s390x cpu topology dedicated errors
tests/avocado: s390x cpu topology bad move
MAINTAINERS | 10 +
docs/devel/index-internals.rst | 1 +
docs/devel/s390-cpu-topology.rst | 170 ++++++++++
docs/system/s390x/cpu-topology.rst | 244 +++++++++++++++
docs/system/target-s390x.rst | 1 +
qapi/machine-common.json | 21 ++
qapi/machine-target.json | 120 +++++++
qapi/machine.json | 47 ++-
qapi/qapi-schema.json | 1 +
include/hw/boards.h | 10 +-
include/hw/qdev-properties-system.h | 4 +
include/hw/s390x/cpu-topology.h | 78 +++++
include/hw/s390x/s390-virtio-ccw.h | 6 +
include/hw/s390x/sclp.h | 4 +-
target/s390x/cpu.h | 82 +++++
target/s390x/kvm/kvm_s390x.h | 1 +
hw/core/machine-hmp-cmds.c | 6 +
hw/core/machine-smp.c | 48 ++-
hw/core/machine.c | 4 +
hw/core/qdev-properties-system.c | 13 +
hw/s390x/cpu-topology.c | 469 ++++++++++++++++++++++++++++
hw/s390x/s390-virtio-ccw.c | 29 +-
hw/s390x/sclp.c | 5 +
softmmu/vl.c | 6 +
target/s390x/cpu-sysemu.c | 13 +
target/s390x/cpu.c | 16 +
target/s390x/cpu_models.c | 1 +
target/s390x/kvm/kvm.c | 42 ++-
target/s390x/kvm/stsi-topology.c | 339 ++++++++++++++++++++
hw/s390x/meson.build | 1 +
qapi/meson.build | 1 +
qemu-options.hx | 7 +-
target/s390x/kvm/meson.build | 3 +-
tests/avocado/s390_topology.py | 439 ++++++++++++++++++++++++++
34 files changed, 2217 insertions(+), 25 deletions(-)
create mode 100644 docs/devel/s390-cpu-topology.rst
create mode 100644 docs/system/s390x/cpu-topology.rst
create mode 100644 qapi/machine-common.json
create mode 100644 include/hw/s390x/cpu-topology.h
create mode 100644 hw/s390x/cpu-topology.c
create mode 100644 target/s390x/kvm/stsi-topology.c
create mode 100644 tests/avocado/s390_topology.py
Range-diff against v23:
-: ---------- > 1: 2c7552ab60 qapi: machine.json: change docs regarding CpuInstanceProperties
1: f2219b7583 ! 2: 3ea5ee1016 CPU topology: extend with s390 specifics
@@ Commit message
Let us provide the SMP properties with books and drawers levels
and S390 CPU with dedication and entitlement,
+ Add machine-common.json so we can later include it in
+ machine-target.json also.
+
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
@@ qapi/machine-common.json (new)
+##
+# @CpuS390Entitlement:
+#
-+# An enumeration of cpu entitlements that can be assumed by a virtual
++# An enumeration of CPU entitlements that can be assumed by a virtual
+# S390 CPU
+#
+# Since: 8.2
@@ qapi/machine.json
##
# @SysEmuTarget:
-@@
- #
- # @thread-id: ID of the underlying host thread
- #
--# @props: properties describing to which node/socket/core/thread
-+# @props: properties describing to which node/drawer/book/socket/core/thread
- # virtual CPU belongs to, provided if supported by board
- #
- # @target: the QEMU system emulation target, which determines which
@@
#
# @node-id: NUMA node ID the CPU belongs to
#
-# @socket-id: socket number within node/board the CPU belongs to
-+# @drawer-id: drawer number within node/board the CPU belongs to (since 8.2)
++# @drawer-id: drawer number within node/board the CPU belongs to
++# (since 8.2)
+#
-+# @book-id: book number within drawer/node/board the CPU belongs to (since 8.2)
++# @book-id: book number within drawer/node/board the CPU belongs to
++# (since 8.2)
+#
+# @socket-id: socket number within book/node/board the CPU belongs to
#
# @die-id: die number within socket the CPU belongs to (since 4.1)
#
@@
- #
- # @thread-id: thread number within core the CPU belongs to
- #
--# Note: currently there are 6 properties that could be present but
-+# Note: currently there are 8 properties that could be present but
- # management should be prepared to pass through other properties
- # with device_add command to allow for future interface extension.
- # This also requires the filed names to be kept in sync with the
-@@
- ##
{ 'struct': 'CpuInstanceProperties',
+ # Keep these in sync with the properties device_add accepts
'data': { '*node-id': 'int',
+ '*drawer-id': 'int',
+ '*book-id': 'int',
@@ qapi/machine.json
'*dies': 'int',
'*clusters': 'int',
+ ## qapi/qapi-schema.json ##
+@@
+ { 'include': 'introspect.json' }
+ { 'include': 'qom.json' }
+ { 'include': 'qdev.json' }
++{ 'include': 'machine-common.json' }
+ { 'include': 'machine.json' }
+ { 'include': 'machine-target.json' }
+ { 'include': 'replay.json' }
+
## include/hw/boards.h ##
@@ include/hw/boards.h: typedef struct {
* @clusters_supported - whether clusters are supported by the machine
2: 5fae55e5a1 = 3: 1f259b26b3 s390x/cpu topology: add topology entries on CPU hotplug
3: c775d90904 ! 4: 703a097c30 target/s390x/cpu topology: handle STSI(15) and build the SYSIB
@@ qapi/machine-target.json
+##
+# @CpuS390Polarization:
+#
-+# An enumeration of cpu polarization that can be assumed by a virtual
++# An enumeration of CPU polarization that can be assumed by a virtual
+# S390 CPU
+#
+# Since: 8.2
@@ qapi/machine-target.json
+{ 'enum': 'CpuS390Polarization',
+ 'prefix': 'S390_CPU_POLARIZATION',
+ 'data': [ 'horizontal', 'vertical' ],
-+ 'if': 'TARGET_S390X'
++ 'if': 'TARGET_S390X'
+}
## include/hw/s390x/cpu-topology.h ##
@@ target/s390x/kvm/stsi-topology.c (new)
+ l->book - r->book ?:
+ l->socket - r->socket ?:
+ l->type - r->type ?:
-+ -1 * (l->vertical - r->vertical) ?:
-+ -1 * (l->entitlement - r->entitlement) ?:
-+ -1 * (l->dedicated - r->dedicated) ?:
++ /* logic is inverted for the next three */
++ r->vertical - l->vertical ?:
++ r->entitlement - l->entitlement ?:
++ r->dedicated - l->dedicated ?:
+ l->origin - r->origin;
+}
+
4: 7c68edeb44 = 5: 052b96b1fb s390x/sclp: reporting the maximum nested topology entries
5: 78d0a953c9 = 6: 4229524ab7 s390x/cpu topology: resetting the Topology-Change-Report
6: f15c30a1b9 = 7: 036699b7e3 s390x/cpu topology: interception of PTF instruction
7: 837eb0924f = 8: 9c35dd0a1b target/s390x/cpu topology: activate CPU topology
8: 394e0ae6c0 ! 9: e7eb324d8b qapi/s390x/cpu topology: set-cpu-topology qmp command
@@ qapi/machine-target.json
#
@@
'data': [ 'horizontal', 'vertical' ],
- 'if': 'TARGET_S390X'
+ 'if': 'TARGET_S390X'
}
+
+##
+# @set-cpu-topology:
+#
++# Modifies the topology by moving the CPU inside the topology
++# tree or by changing a modifier attribute of a CPU.
++# Absent values will not be modified.
++#
+# @core-id: the vCPU ID to be moved
-+# @socket-id: optional destination socket where to move the vCPU
-+# @book-id: optional destination book where to move the vCPU
-+# @drawer-id: optional destination drawer where to move the vCPU
-+# @entitlement: optional entitlement
-+# @dedicated: optional, if the vCPU is dedicated to a real CPU
++#
++# @socket-id: destination socket to move the vCPU to
++#
++# @book-id: destination book to move the vCPU to
++#
++# @drawer-id: destination drawer to move the vCPU to
++#
++# @entitlement: entitlement to set
++#
++# @dedicated: whether the provisioning of real to virtual CPU is dedicated
+#
+# Features:
-+# @unstable: This command may still be modified.
+#
-+# Modifies the topology by moving the CPU inside the topology
-+# tree or by changing a modifier attribute of a CPU.
-+# Default value for optional parameter is the current value
-+# used by the CPU.
++# @unstable: This command may still be modified.
+#
+# Returns: Nothing on success, the reason on failure.
+#
9: a4b6738536 ! 10: f05505e76e machine: adding s390 topology to query-cpu-fast
@@ Commit message
## qapi/machine.json ##
@@
- # Additional information about a virtual S390 CPU
#
# @cpu-state: the virtual CPU's state
+ #
+# @dedicated: the virtual CPU's dedication (since 8.2)
++#
+# @entitlement: the virtual CPU's entitlement (since 8.2)
- #
++#
# Since: 2.12
##
-{ 'struct': 'CpuInfoS390', 'data': { 'cpu-state': 'CpuS390State' } }
10: c74f719b43 = 11: 9ce080ffa3 machine: adding s390 topology to info hotpluggable-cpus
11: a2bf4b54b3 ! 12: 7711f4f253 qapi/s390x/cpu topology: CPU_POLARIZATION_CHANGE qapi event
@@ qapi/machine-target.json
+#
+# Emitted when the guest asks to change the polarization.
+#
-+# @polarization: polarization specified by the guest
-+#
-+# Features:
-+# @unstable: This command may still be modified.
-+#
+# The guest can tell the host (via the PTF instruction) whether the
+# CPUs should be provisioned using horizontal or vertical polarization.
+#
@@ qapi/machine-target.json
+# The guest will get information on the details of the provisioning
+# the next time it uses the STSI(15) instruction.
+#
++# @polarization: polarization specified by the guest
++#
++# Features:
++#
++# @unstable: This event is experimental.
++#
+# Since: 8.2
+#
+# Example:
12: 6a9e834176 ! 13: 67eb5092ac qapi/s390x/cpu topology: query-cpu-polarization qmp command
@@ Metadata
Author: Pierre Morel <pmorel@linux.ibm.com>
## Commit message ##
- qapi/s390x/cpu topology: query-cpu-polarization qmp command
+ qapi/s390x/cpu topology: add query-s390x-cpu-polarization command
- The query-cpu-polarization qmp command returns the current
+ The query-s390x-cpu-polarization qmp command returns the current
CPU polarization of the machine.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
@@ qapi/machine-target.json
+##
+# @CpuPolarizationInfo:
+#
-+# The result of a cpu polarization
++# The result of a CPU polarization query.
+#
+# @polarization: the CPU polarization
+#
@@ qapi/machine-target.json
+# @query-s390x-cpu-polarization:
+#
+# Features:
-+# @unstable: This command may still be modified.
+#
-+# Returns: the machine polarization
++# @unstable: This command is experimental.
++#
++# Returns: the machine's CPU polarization
+#
+# Since: 8.2
+##
13: 24d2a3507b ! 14: b8ccd9d6de docs/s390x/cpu topology: document s390x cpu topology
@@ docs/devel/s390-cpu-topology.rst (new)
## docs/system/s390x/cpu-topology.rst (new) ##
@@
++.. _cpu-topology-s390x:
++
+CPU topology on s390x
+=====================
+
@@ docs/system/target-s390x.rst: Architectural features
s390x/bootdevices
s390x/protvirt
+ s390x/cpu-topology
+
+ ## qapi/machine.json ##
+@@
+ # Which members are optional and which mandatory depends on the architecture
+ # and board.
+ #
++# For s390x see :ref:`cpu-topology-s390x`.
++#
+ # @node-id: NUMA node ID the CPU belongs to
+ #
+ # @drawer-id: drawer number within node/board the CPU belongs to
14: bc1adfbdb7 = 15: 2599bb2b9e tests/avocado: s390x cpu topology core
15: d2be50e3a7 = 16: e6903afc76 tests/avocado: s390x cpu topology polarization
16: 4ba53284b1 = 17: 243aeb9174 tests/avocado: s390x cpu topology entitlement tests
17: bfabe0aaf1 = 18: 20fabad2d3 tests/avocado: s390x cpu topology test dedicated CPU
18: 32009fe084 = 19: 4ed8f0883b tests/avocado: s390x cpu topology test socket full
19: e607efc139 = 20: 6787f49dfd tests/avocado: s390x cpu topology dedicated errors
20: e600011277 = 21: 01d7083d75 tests/avocado: s390x cpu topology bad move
base-commit: 494a6a2cf7f775d2c20fd6df9601e30606cc2014
--
2.39.2
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH v24 01/21] qapi: machine.json: change docs regarding CpuInstanceProperties
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-10-12 5:59 ` Markus Armbruster
2023-09-26 12:15 ` [PATCH v24 02/21] CPU topology: extend with s390 specifics Nina Schoetterl-Glausch
` (19 subsequent siblings)
20 siblings, 1 reply; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal
Clarify roles of different architectures.
Also change things a bit in anticipation of additional members being
added.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
Reference to s390x docs added in patch 14
qapi/machine.json | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/qapi/machine.json b/qapi/machine.json
index a08b6576ca..3c074c9902 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -70,9 +70,9 @@
# @qom-path: path to the CPU object in the QOM tree
#
# @thread-id: ID of the underlying host thread
-#
-# @props: properties describing to which node/socket/core/thread
-# virtual CPU belongs to, provided if supported by board
+
+# @props: properties of type CpuInstanceProperties associated with a
+# virtual CPU, e.g. the socket id
#
# @target: the QEMU system emulation target, which determines which
# additional fields will be listed (since 3.0)
@@ -899,6 +899,9 @@
# should be passed by management with device_add command when a CPU is
# being hotplugged.
#
+# Which members are optional and which mandatory depends on the architecture
+# and board.
+#
# @node-id: NUMA node ID the CPU belongs to
#
# @socket-id: socket number within node/board the CPU belongs to
@@ -912,15 +915,13 @@
#
# @thread-id: thread number within core the CPU belongs to
#
-# Note: currently there are 6 properties that could be present but
-# management should be prepared to pass through other properties
-# with device_add command to allow for future interface extension.
-# This also requires the filed names to be kept in sync with the
-# properties passed to -device/device_add.
+# Note: management should be prepared to pass through additional
+# properties with device_add.
#
# Since: 2.7
##
{ 'struct': 'CpuInstanceProperties',
+ # Keep these in sync with the properties device_add accepts
'data': { '*node-id': 'int',
'*socket-id': 'int',
'*die-id': 'int',
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 02/21] CPU topology: extend with s390 specifics
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 01/21] qapi: machine.json: change docs regarding CpuInstanceProperties Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-28 11:31 ` Thomas Huth
2023-10-04 16:39 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 03/21] s390x/cpu topology: add topology entries on CPU hotplug Nina Schoetterl-Glausch
` (18 subsequent siblings)
20 siblings, 2 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
S390 adds two new SMP levels, drawers and books to the CPU
topology.
S390 CPUs have specific topology features like dedication and
entitlement. These indicate to the guest information on host
vCPU scheduling and help the guest make better scheduling decisions.
Let us provide the SMP properties with books and drawers levels
and S390 CPU with dedication and entitlement,
Add machine-common.json so we can later include it in
machine-target.json also.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
qapi/machine-common.json | 21 +++++++++++++
qapi/machine.json | 17 +++++++++-
qapi/qapi-schema.json | 1 +
include/hw/boards.h | 10 +++++-
include/hw/qdev-properties-system.h | 4 +++
target/s390x/cpu.h | 6 ++++
hw/core/machine-smp.c | 48 ++++++++++++++++++++++++-----
hw/core/machine.c | 4 +++
hw/core/qdev-properties-system.c | 13 ++++++++
hw/s390x/s390-virtio-ccw.c | 4 +++
softmmu/vl.c | 6 ++++
target/s390x/cpu.c | 7 +++++
qapi/meson.build | 1 +
qemu-options.hx | 7 +++--
14 files changed, 138 insertions(+), 11 deletions(-)
create mode 100644 qapi/machine-common.json
diff --git a/qapi/machine-common.json b/qapi/machine-common.json
new file mode 100644
index 0000000000..fa6bd71d12
--- /dev/null
+++ b/qapi/machine-common.json
@@ -0,0 +1,21 @@
+# -*- Mode: Python -*-
+# vim: filetype=python
+#
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+
+##
+# = Machines S390 data types
+##
+
+##
+# @CpuS390Entitlement:
+#
+# An enumeration of CPU entitlements that can be assumed by a virtual
+# S390 CPU
+#
+# Since: 8.2
+##
+{ 'enum': 'CpuS390Entitlement',
+ 'prefix': 'S390_CPU_ENTITLEMENT',
+ 'data': [ 'auto', 'low', 'medium', 'high' ] }
diff --git a/qapi/machine.json b/qapi/machine.json
index 3c074c9902..8499d40269 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -9,6 +9,7 @@
##
{ 'include': 'common.json' }
+{ 'include': 'machine-common.json' }
##
# @SysEmuTarget:
@@ -904,7 +905,13 @@
#
# @node-id: NUMA node ID the CPU belongs to
#
-# @socket-id: socket number within node/board the CPU belongs to
+# @drawer-id: drawer number within node/board the CPU belongs to
+# (since 8.2)
+#
+# @book-id: book number within drawer/node/board the CPU belongs to
+# (since 8.2)
+#
+# @socket-id: socket number within book/node/board the CPU belongs to
#
# @die-id: die number within socket the CPU belongs to (since 4.1)
#
@@ -923,6 +930,8 @@
{ 'struct': 'CpuInstanceProperties',
# Keep these in sync with the properties device_add accepts
'data': { '*node-id': 'int',
+ '*drawer-id': 'int',
+ '*book-id': 'int',
'*socket-id': 'int',
'*die-id': 'int',
'*cluster-id': 'int',
@@ -1481,6 +1490,10 @@
#
# @cpus: number of virtual CPUs in the virtual machine
#
+# @drawers: number of drawers in the CPU topology (since 8.2)
+#
+# @books: number of books in the CPU topology (since 8.2)
+#
# @sockets: number of sockets in the CPU topology
#
# @dies: number of dies per socket in the CPU topology
@@ -1499,6 +1512,8 @@
##
{ 'struct': 'SMPConfiguration', 'data': {
'*cpus': 'int',
+ '*drawers': 'int',
+ '*books': 'int',
'*sockets': 'int',
'*dies': 'int',
'*clusters': 'int',
diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json
index 6594afba31..c01ec335e6 100644
--- a/qapi/qapi-schema.json
+++ b/qapi/qapi-schema.json
@@ -66,6 +66,7 @@
{ 'include': 'introspect.json' }
{ 'include': 'qom.json' }
{ 'include': 'qdev.json' }
+{ 'include': 'machine-common.json' }
{ 'include': 'machine.json' }
{ 'include': 'machine-target.json' }
{ 'include': 'replay.json' }
diff --git a/include/hw/boards.h b/include/hw/boards.h
index 6c67af196a..6dcfc879eb 100644
--- a/include/hw/boards.h
+++ b/include/hw/boards.h
@@ -134,12 +134,16 @@ typedef struct {
* @clusters_supported - whether clusters are supported by the machine
* @has_clusters - whether clusters are explicitly specified in the user
* provided SMP configuration
+ * @books_supported - whether books are supported by the machine
+ * @drawers_supported - whether drawers are supported by the machine
*/
typedef struct {
bool prefer_sockets;
bool dies_supported;
bool clusters_supported;
bool has_clusters;
+ bool books_supported;
+ bool drawers_supported;
} SMPCompatProps;
/**
@@ -310,7 +314,9 @@ typedef struct DeviceMemoryState {
/**
* CpuTopology:
* @cpus: the number of present logical processors on the machine
- * @sockets: the number of sockets on the machine
+ * @drawers: the number of drawers on the machine
+ * @books: the number of books in one drawer
+ * @sockets: the number of sockets in one book
* @dies: the number of dies in one socket
* @clusters: the number of clusters in one die
* @cores: the number of cores in one cluster
@@ -319,6 +325,8 @@ typedef struct DeviceMemoryState {
*/
typedef struct CpuTopology {
unsigned int cpus;
+ unsigned int drawers;
+ unsigned int books;
unsigned int sockets;
unsigned int dies;
unsigned int clusters;
diff --git a/include/hw/qdev-properties-system.h b/include/hw/qdev-properties-system.h
index 0ac327ae60..e4f8a13afc 100644
--- a/include/hw/qdev-properties-system.h
+++ b/include/hw/qdev-properties-system.h
@@ -22,6 +22,7 @@ extern const PropertyInfo qdev_prop_audiodev;
extern const PropertyInfo qdev_prop_off_auto_pcibar;
extern const PropertyInfo qdev_prop_pcie_link_speed;
extern const PropertyInfo qdev_prop_pcie_link_width;
+extern const PropertyInfo qdev_prop_cpus390entitlement;
#define DEFINE_PROP_PCI_DEVFN(_n, _s, _f, _d) \
DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_pci_devfn, int32_t)
@@ -73,5 +74,8 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
#define DEFINE_PROP_UUID_NODEFAULT(_name, _state, _field) \
DEFINE_PROP(_name, _state, _field, qdev_prop_uuid, QemuUUID)
+#define DEFINE_PROP_CPUS390ENTITLEMENT(_n, _s, _f, _d) \
+ DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_cpus390entitlement, \
+ CpuS390Entitlement)
#endif
diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
index 304029e57c..dfcc1aa1fc 100644
--- a/target/s390x/cpu.h
+++ b/target/s390x/cpu.h
@@ -30,6 +30,7 @@
#include "exec/cpu-defs.h"
#include "qemu/cpu-float.h"
#include "tcg/tcg_s390x.h"
+#include "qapi/qapi-types-machine-common.h"
#define ELF_MACHINE_UNAME "S390X"
@@ -132,6 +133,11 @@ struct CPUArchState {
#if !defined(CONFIG_USER_ONLY)
uint32_t core_id; /* PoP "CPU address", same as cpu_index */
+ int32_t socket_id;
+ int32_t book_id;
+ int32_t drawer_id;
+ bool dedicated;
+ CpuS390Entitlement entitlement; /* Used only for vertical polarization */
uint64_t cpuid;
#endif
diff --git a/hw/core/machine-smp.c b/hw/core/machine-smp.c
index 0f4d9b6f7a..25019c91ee 100644
--- a/hw/core/machine-smp.c
+++ b/hw/core/machine-smp.c
@@ -33,6 +33,14 @@ static char *cpu_hierarchy_to_string(MachineState *ms)
MachineClass *mc = MACHINE_GET_CLASS(ms);
GString *s = g_string_new(NULL);
+ if (mc->smp_props.drawers_supported) {
+ g_string_append_printf(s, "drawers (%u) * ", ms->smp.drawers);
+ }
+
+ if (mc->smp_props.books_supported) {
+ g_string_append_printf(s, "books (%u) * ", ms->smp.books);
+ }
+
g_string_append_printf(s, "sockets (%u)", ms->smp.sockets);
if (mc->smp_props.dies_supported) {
@@ -75,6 +83,8 @@ void machine_parse_smp_config(MachineState *ms,
{
MachineClass *mc = MACHINE_GET_CLASS(ms);
unsigned cpus = config->has_cpus ? config->cpus : 0;
+ unsigned drawers = config->has_drawers ? config->drawers : 0;
+ unsigned books = config->has_books ? config->books : 0;
unsigned sockets = config->has_sockets ? config->sockets : 0;
unsigned dies = config->has_dies ? config->dies : 0;
unsigned clusters = config->has_clusters ? config->clusters : 0;
@@ -87,6 +97,8 @@ void machine_parse_smp_config(MachineState *ms,
* explicit configuration like "cpus=0" is not allowed.
*/
if ((config->has_cpus && config->cpus == 0) ||
+ (config->has_drawers && config->drawers == 0) ||
+ (config->has_books && config->books == 0) ||
(config->has_sockets && config->sockets == 0) ||
(config->has_dies && config->dies == 0) ||
(config->has_clusters && config->clusters == 0) ||
@@ -113,6 +125,19 @@ void machine_parse_smp_config(MachineState *ms,
dies = dies > 0 ? dies : 1;
clusters = clusters > 0 ? clusters : 1;
+ if (!mc->smp_props.books_supported && books > 1) {
+ error_setg(errp, "books not supported by this machine's CPU topology");
+ return;
+ }
+ books = books > 0 ? books : 1;
+
+ if (!mc->smp_props.drawers_supported && drawers > 1) {
+ error_setg(errp,
+ "drawers not supported by this machine's CPU topology");
+ return;
+ }
+ drawers = drawers > 0 ? drawers : 1;
+
/* compute missing values based on the provided ones */
if (cpus == 0 && maxcpus == 0) {
sockets = sockets > 0 ? sockets : 1;
@@ -126,33 +151,41 @@ void machine_parse_smp_config(MachineState *ms,
if (sockets == 0) {
cores = cores > 0 ? cores : 1;
threads = threads > 0 ? threads : 1;
- sockets = maxcpus / (dies * clusters * cores * threads);
+ sockets = maxcpus /
+ (drawers * books * dies * clusters * cores * threads);
} else if (cores == 0) {
threads = threads > 0 ? threads : 1;
- cores = maxcpus / (sockets * dies * clusters * threads);
+ cores = maxcpus /
+ (drawers * books * sockets * dies * clusters * threads);
}
} else {
/* prefer cores over sockets since 6.2 */
if (cores == 0) {
sockets = sockets > 0 ? sockets : 1;
threads = threads > 0 ? threads : 1;
- cores = maxcpus / (sockets * dies * clusters * threads);
+ cores = maxcpus /
+ (drawers * books * sockets * dies * clusters * threads);
} else if (sockets == 0) {
threads = threads > 0 ? threads : 1;
- sockets = maxcpus / (dies * clusters * cores * threads);
+ sockets = maxcpus /
+ (drawers * books * dies * clusters * cores * threads);
}
}
/* try to calculate omitted threads at last */
if (threads == 0) {
- threads = maxcpus / (sockets * dies * clusters * cores);
+ threads = maxcpus /
+ (drawers * books * sockets * dies * clusters * cores);
}
}
- maxcpus = maxcpus > 0 ? maxcpus : sockets * dies * clusters * cores * threads;
+ maxcpus = maxcpus > 0 ? maxcpus : drawers * books * sockets * dies *
+ clusters * cores * threads;
cpus = cpus > 0 ? cpus : maxcpus;
ms->smp.cpus = cpus;
+ ms->smp.drawers = drawers;
+ ms->smp.books = books;
ms->smp.sockets = sockets;
ms->smp.dies = dies;
ms->smp.clusters = clusters;
@@ -163,7 +196,8 @@ void machine_parse_smp_config(MachineState *ms,
mc->smp_props.has_clusters = config->has_clusters;
/* sanity-check of the computed topology */
- if (sockets * dies * clusters * cores * threads != maxcpus) {
+ if (drawers * books * sockets * dies * clusters * cores * threads !=
+ maxcpus) {
g_autofree char *topo_msg = cpu_hierarchy_to_string(ms);
error_setg(errp, "Invalid CPU topology: "
"product of the hierarchy must match maxcpus: "
diff --git a/hw/core/machine.c b/hw/core/machine.c
index cb38b8cf4c..c52d03cb90 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -847,6 +847,8 @@ static void machine_get_smp(Object *obj, Visitor *v, const char *name,
MachineState *ms = MACHINE(obj);
SMPConfiguration *config = &(SMPConfiguration){
.has_cpus = true, .cpus = ms->smp.cpus,
+ .has_drawers = true, .drawers = ms->smp.drawers,
+ .has_books = true, .books = ms->smp.books,
.has_sockets = true, .sockets = ms->smp.sockets,
.has_dies = true, .dies = ms->smp.dies,
.has_clusters = true, .clusters = ms->smp.clusters,
@@ -1112,6 +1114,8 @@ static void machine_initfn(Object *obj)
/* default to mc->default_cpus */
ms->smp.cpus = mc->default_cpus;
ms->smp.max_cpus = mc->default_cpus;
+ ms->smp.drawers = 1;
+ ms->smp.books = 1;
ms->smp.sockets = 1;
ms->smp.dies = 1;
ms->smp.clusters = 1;
diff --git a/hw/core/qdev-properties-system.c b/hw/core/qdev-properties-system.c
index 41b7e682c7..fee900949d 100644
--- a/hw/core/qdev-properties-system.c
+++ b/hw/core/qdev-properties-system.c
@@ -1147,3 +1147,16 @@ const PropertyInfo qdev_prop_uuid = {
.set = set_uuid,
.set_default_value = set_default_uuid_auto,
};
+
+/* --- s390 cpu entitlement policy --- */
+
+QEMU_BUILD_BUG_ON(sizeof(CpuS390Entitlement) != sizeof(int));
+
+const PropertyInfo qdev_prop_cpus390entitlement = {
+ .name = "CpuS390Entitlement",
+ .description = "low/medium (default)/high",
+ .enum_table = &CpuS390Entitlement_lookup,
+ .get = qdev_propinfo_get_enum,
+ .set = qdev_propinfo_set_enum,
+ .set_default_value = qdev_propinfo_set_default_value_enum,
+};
diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
index 2d75f2131f..c1123a9b45 100644
--- a/hw/s390x/s390-virtio-ccw.c
+++ b/hw/s390x/s390-virtio-ccw.c
@@ -744,6 +744,8 @@ static void ccw_machine_class_init(ObjectClass *oc, void *data)
mc->no_sdcard = 1;
mc->max_cpus = S390_MAX_CPUS;
mc->has_hotpluggable_cpus = true;
+ mc->smp_props.books_supported = true;
+ mc->smp_props.drawers_supported = true;
assert(!mc->get_hotplug_handler);
mc->get_hotplug_handler = s390_get_hotplug_handler;
mc->cpu_index_to_instance_props = s390_cpu_index_to_props;
@@ -853,6 +855,8 @@ static void ccw_machine_8_1_class_options(MachineClass *mc)
{
ccw_machine_8_2_class_options(mc);
compat_props_add(mc->compat_props, hw_compat_8_1, hw_compat_8_1_len);
+ mc->smp_props.drawers_supported = false;
+ mc->smp_props.books_supported = false;
}
DEFINE_CCW_MACHINE(8_1, "8.1", false);
diff --git a/softmmu/vl.c b/softmmu/vl.c
index db04f98c36..b621f9d604 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -724,6 +724,12 @@ static QemuOptsList qemu_smp_opts = {
{
.name = "cpus",
.type = QEMU_OPT_NUMBER,
+ }, {
+ .name = "drawers",
+ .type = QEMU_OPT_NUMBER,
+ }, {
+ .name = "books",
+ .type = QEMU_OPT_NUMBER,
}, {
.name = "sockets",
.type = QEMU_OPT_NUMBER,
diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c
index df167493c3..74405beb51 100644
--- a/target/s390x/cpu.c
+++ b/target/s390x/cpu.c
@@ -31,6 +31,7 @@
#include "qapi/qapi-types-machine.h"
#include "sysemu/hw_accel.h"
#include "hw/qdev-properties.h"
+#include "hw/qdev-properties-system.h"
#include "fpu/softfloat-helpers.h"
#include "disas/capstone.h"
#include "sysemu/tcg.h"
@@ -292,6 +293,12 @@ static gchar *s390_gdb_arch_name(CPUState *cs)
static Property s390x_cpu_properties[] = {
#if !defined(CONFIG_USER_ONLY)
DEFINE_PROP_UINT32("core-id", S390CPU, env.core_id, 0),
+ DEFINE_PROP_INT32("socket-id", S390CPU, env.socket_id, -1),
+ DEFINE_PROP_INT32("book-id", S390CPU, env.book_id, -1),
+ DEFINE_PROP_INT32("drawer-id", S390CPU, env.drawer_id, -1),
+ DEFINE_PROP_BOOL("dedicated", S390CPU, env.dedicated, false),
+ DEFINE_PROP_CPUS390ENTITLEMENT("entitlement", S390CPU, env.entitlement,
+ S390_CPU_ENTITLEMENT_AUTO),
#endif
DEFINE_PROP_END_OF_LIST()
};
diff --git a/qapi/meson.build b/qapi/meson.build
index 60a668b343..f81a37565c 100644
--- a/qapi/meson.build
+++ b/qapi/meson.build
@@ -36,6 +36,7 @@ qapi_all_modules = [
'error',
'introspect',
'job',
+ 'machine-common',
'machine',
'machine-target',
'migration',
diff --git a/qemu-options.hx b/qemu-options.hx
index bcd77255cb..9895ac5f84 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -272,11 +272,14 @@ SRST
ERST
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
- "-smp [[cpus=]n][,maxcpus=maxcpus][,sockets=sockets][,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n"
+ "-smp [[cpus=]n][,maxcpus=maxcpus][,drawers=drawers][,books=books][,sockets=sockets]\n"
+ " [,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n"
" set the number of initial CPUs to 'n' [default=1]\n"
" maxcpus= maximum number of total CPUs, including\n"
" offline CPUs for hotplug, etc\n"
- " sockets= number of sockets on the machine board\n"
+ " drawers= number of drawers on the machine board\n"
+ " books= number of books in one drawer\n"
+ " sockets= number of sockets in one book\n"
" dies= number of dies in one socket\n"
" clusters= number of clusters in one die\n"
" cores= number of cores in one cluster\n"
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 03/21] s390x/cpu topology: add topology entries on CPU hotplug
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 01/21] qapi: machine.json: change docs regarding CpuInstanceProperties Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 02/21] CPU topology: extend with s390 specifics Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 04/21] target/s390x/cpu topology: handle STSI(15) and build the SYSIB Nina Schoetterl-Glausch
` (17 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
The topology information are attributes of the CPU and are
specified during the CPU device creation.
On hot plug we:
- calculate the default values for the topology for drawers,
books and sockets in the case they are not specified.
- verify the CPU attributes
- check that we have still room on the desired socket
The possibility to insert a CPU in a mask is dependent on the
number of cores allowed in a socket, a book or a drawer, the
checking is done during the hot plug of the CPU to have an
immediate answer.
If the complete topology is not specified, the core is added
in the physical topology based on its core ID and it gets
defaults values for the modifier attributes.
This way, starting QEMU without specifying the topology can
still get some advantage of the CPU topology.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
MAINTAINERS | 6 +
include/hw/s390x/cpu-topology.h | 54 +++++++
hw/s390x/cpu-topology.c | 259 ++++++++++++++++++++++++++++++++
hw/s390x/s390-virtio-ccw.c | 22 ++-
hw/s390x/meson.build | 1 +
5 files changed, 340 insertions(+), 2 deletions(-)
create mode 100644 include/hw/s390x/cpu-topology.h
create mode 100644 hw/s390x/cpu-topology.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 355b1960ce..c5a5303f61 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1691,6 +1691,12 @@ F: hw/s390x/event-facility.c
F: hw/s390x/sclp*.c
L: qemu-s390x@nongnu.org
+S390 CPU topology
+M: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
+S: Supported
+F: include/hw/s390x/cpu-topology.h
+F: hw/s390x/cpu-topology.c
+
X86 Machines
------------
PC
diff --git a/include/hw/s390x/cpu-topology.h b/include/hw/s390x/cpu-topology.h
new file mode 100644
index 0000000000..97b0af2795
--- /dev/null
+++ b/include/hw/s390x/cpu-topology.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * CPU Topology
+ *
+ * Copyright IBM Corp. 2022, 2023
+ * Author(s): Pierre Morel <pmorel@linux.ibm.com>
+ *
+ */
+#ifndef HW_S390X_CPU_TOPOLOGY_H
+#define HW_S390X_CPU_TOPOLOGY_H
+
+#ifndef CONFIG_USER_ONLY
+
+#include "qemu/queue.h"
+#include "hw/boards.h"
+#include "qapi/qapi-types-machine-target.h"
+
+typedef struct S390Topology {
+ uint8_t *cores_per_socket;
+} S390Topology;
+
+#ifdef CONFIG_KVM
+bool s390_has_topology(void);
+void s390_topology_setup_cpu(MachineState *ms, S390CPU *cpu, Error **errp);
+#else
+static inline bool s390_has_topology(void)
+{
+ return false;
+}
+static inline void s390_topology_setup_cpu(MachineState *ms,
+ S390CPU *cpu,
+ Error **errp) {}
+#endif
+
+extern S390Topology s390_topology;
+
+static inline int s390_std_socket(int n, CpuTopology *smp)
+{
+ return (n / smp->cores) % smp->sockets;
+}
+
+static inline int s390_std_book(int n, CpuTopology *smp)
+{
+ return (n / (smp->cores * smp->sockets)) % smp->books;
+}
+
+static inline int s390_std_drawer(int n, CpuTopology *smp)
+{
+ return (n / (smp->cores * smp->sockets * smp->books)) % smp->drawers;
+}
+
+#endif /* CONFIG_USER_ONLY */
+
+#endif
diff --git a/hw/s390x/cpu-topology.c b/hw/s390x/cpu-topology.c
new file mode 100644
index 0000000000..189fcc5334
--- /dev/null
+++ b/hw/s390x/cpu-topology.c
@@ -0,0 +1,259 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * CPU Topology
+ *
+ * Copyright IBM Corp. 2022, 2023
+ * Author(s): Pierre Morel <pmorel@linux.ibm.com>
+ *
+ * S390 topology handling can be divided in two parts:
+ *
+ * - The first part in this file is taking care of all common functions
+ * used by KVM and TCG to create and modify the topology.
+ *
+ * - The second part, building the topology information data for the
+ * guest with CPU and KVM specificity will be implemented inside
+ * the target/s390/kvm sub tree.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "hw/qdev-properties.h"
+#include "hw/boards.h"
+#include "target/s390x/cpu.h"
+#include "hw/s390x/s390-virtio-ccw.h"
+#include "hw/s390x/cpu-topology.h"
+
+/*
+ * s390_topology is used to keep the topology information.
+ * .cores_per_socket: tracks information on the count of cores
+ * per socket.
+ */
+S390Topology s390_topology = {
+ /* will be initialized after the CPU model is realized */
+ .cores_per_socket = NULL,
+};
+
+/**
+ * s390_socket_nb:
+ * @cpu: s390x CPU
+ *
+ * Returns the socket number used inside the cores_per_socket array
+ * for a topology tree entry
+ */
+static int s390_socket_nb_from_ids(int drawer_id, int book_id, int socket_id)
+{
+ return (drawer_id * current_machine->smp.books + book_id) *
+ current_machine->smp.sockets + socket_id;
+}
+
+/**
+ * s390_socket_nb:
+ * @cpu: s390x CPU
+ *
+ * Returns the socket number used inside the cores_per_socket array
+ * for a cpu.
+ */
+static int s390_socket_nb(S390CPU *cpu)
+{
+ return s390_socket_nb_from_ids(cpu->env.drawer_id, cpu->env.book_id,
+ cpu->env.socket_id);
+}
+
+/**
+ * s390_has_topology:
+ *
+ * Return: true if the topology is supported by the machine.
+ */
+bool s390_has_topology(void)
+{
+ return false;
+}
+
+/**
+ * s390_topology_init:
+ * @ms: the machine state where the machine topology is defined
+ *
+ * Keep track of the machine topology.
+ *
+ * Allocate an array to keep the count of cores per socket.
+ * The index of the array starts at socket 0 from book 0 and
+ * drawer 0 up to the maximum allowed by the machine topology.
+ */
+static void s390_topology_init(MachineState *ms)
+{
+ CpuTopology *smp = &ms->smp;
+
+ s390_topology.cores_per_socket = g_new0(uint8_t, smp->sockets *
+ smp->books * smp->drawers);
+}
+
+/**
+ * s390_topology_cpu_default:
+ * @cpu: pointer to a S390CPU
+ * @errp: Error pointer
+ *
+ * Setup the default topology if no attributes are already set.
+ * Passing a CPU with some, but not all, attributes set is considered
+ * an error.
+ *
+ * The function calculates the (drawer_id, book_id, socket_id)
+ * topology by filling the cores starting from the first socket
+ * (0, 0, 0) up to the last (smp->drawers, smp->books, smp->sockets).
+ *
+ * CPU type and dedication have defaults values set in the
+ * s390x_cpu_properties, entitlement must be adjust depending on the
+ * dedication.
+ *
+ * Returns false if it is impossible to setup a default topology
+ * true otherwise.
+ */
+static bool s390_topology_cpu_default(S390CPU *cpu, Error **errp)
+{
+ CpuTopology *smp = ¤t_machine->smp;
+ CPUS390XState *env = &cpu->env;
+
+ /* All geometry topology attributes must be set or all unset */
+ if ((env->socket_id < 0 || env->book_id < 0 || env->drawer_id < 0) &&
+ (env->socket_id >= 0 || env->book_id >= 0 || env->drawer_id >= 0)) {
+ error_setg(errp,
+ "Please define all or none of the topology geometry attributes");
+ return false;
+ }
+
+ /* If one value is unset all are unset -> calculate defaults */
+ if (env->socket_id < 0) {
+ env->socket_id = s390_std_socket(env->core_id, smp);
+ env->book_id = s390_std_book(env->core_id, smp);
+ env->drawer_id = s390_std_drawer(env->core_id, smp);
+ }
+
+ /*
+ * When the user specifies the entitlement as 'auto' on the command line,
+ * QEMU will set the entitlement as:
+ * Medium when the CPU is not dedicated.
+ * High when dedicated is true.
+ */
+ if (env->entitlement == S390_CPU_ENTITLEMENT_AUTO) {
+ if (env->dedicated) {
+ env->entitlement = S390_CPU_ENTITLEMENT_HIGH;
+ } else {
+ env->entitlement = S390_CPU_ENTITLEMENT_MEDIUM;
+ }
+ }
+ return true;
+}
+
+/**
+ * s390_topology_check:
+ * @socket_id: socket to check
+ * @book_id: book to check
+ * @drawer_id: drawer to check
+ * @entitlement: entitlement to check
+ * @dedicated: dedication to check
+ * @errp: Error pointer
+ *
+ * The function checks if the topology
+ * attributes fits inside the system topology.
+ *
+ * Returns false if the specified topology does not match with
+ * the machine topology.
+ */
+static bool s390_topology_check(uint16_t socket_id, uint16_t book_id,
+ uint16_t drawer_id, uint16_t entitlement,
+ bool dedicated, Error **errp)
+{
+ CpuTopology *smp = ¤t_machine->smp;
+
+ if (socket_id >= smp->sockets) {
+ error_setg(errp, "Unavailable socket: %d", socket_id);
+ return false;
+ }
+ if (book_id >= smp->books) {
+ error_setg(errp, "Unavailable book: %d", book_id);
+ return false;
+ }
+ if (drawer_id >= smp->drawers) {
+ error_setg(errp, "Unavailable drawer: %d", drawer_id);
+ return false;
+ }
+ if (entitlement >= S390_CPU_ENTITLEMENT__MAX) {
+ error_setg(errp, "Unknown entitlement: %d", entitlement);
+ return false;
+ }
+ if (dedicated && (entitlement == S390_CPU_ENTITLEMENT_LOW ||
+ entitlement == S390_CPU_ENTITLEMENT_MEDIUM)) {
+ error_setg(errp, "A dedicated CPU implies high entitlement");
+ return false;
+ }
+ return true;
+}
+
+/**
+ * s390_update_cpu_props:
+ * @ms: the machine state
+ * @cpu: the CPU for which to update the properties from the environment.
+ *
+ */
+static void s390_update_cpu_props(MachineState *ms, S390CPU *cpu)
+{
+ CpuInstanceProperties *props;
+
+ props = &ms->possible_cpus->cpus[cpu->env.core_id].props;
+
+ props->socket_id = cpu->env.socket_id;
+ props->book_id = cpu->env.book_id;
+ props->drawer_id = cpu->env.drawer_id;
+}
+
+/**
+ * s390_topology_setup_cpu:
+ * @ms: MachineState used to initialize the topology structure on
+ * first call.
+ * @cpu: the new S390CPU to insert in the topology structure
+ * @errp: the error pointer
+ *
+ * Called from CPU hotplug to check and setup the CPU attributes
+ * before the CPU is inserted in the topology.
+ * There is no need to update the MTCR explicitly here because it
+ * will be updated by KVM on creation of the new CPU.
+ */
+void s390_topology_setup_cpu(MachineState *ms, S390CPU *cpu, Error **errp)
+{
+ int entry;
+
+ /*
+ * We do not want to initialize the topology if the CPU model
+ * does not support topology, consequently, we have to wait for
+ * the first CPU to be realized, which realizes the CPU model
+ * to initialize the topology structures.
+ *
+ * s390_topology_setup_cpu() is called from the CPU hotplug.
+ */
+ if (!s390_topology.cores_per_socket) {
+ s390_topology_init(ms);
+ }
+
+ if (!s390_topology_cpu_default(cpu, errp)) {
+ return;
+ }
+
+ if (!s390_topology_check(cpu->env.socket_id, cpu->env.book_id,
+ cpu->env.drawer_id, cpu->env.entitlement,
+ cpu->env.dedicated, errp)) {
+ return;
+ }
+
+ /* Do we still have space in the socket */
+ entry = s390_socket_nb(cpu);
+ if (s390_topology.cores_per_socket[entry] >= current_machine->smp.cores) {
+ error_setg(errp, "No more space on this socket");
+ return;
+ }
+
+ /* Update the count of cores in sockets */
+ s390_topology.cores_per_socket[entry] += 1;
+
+ /* topology tree is reflected in props */
+ s390_update_cpu_props(ms, cpu);
+}
diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
index c1123a9b45..7fe2bce20c 100644
--- a/hw/s390x/s390-virtio-ccw.c
+++ b/hw/s390x/s390-virtio-ccw.c
@@ -45,6 +45,7 @@
#include "target/s390x/kvm/pv.h"
#include "migration/blocker.h"
#include "qapi/visitor.h"
+#include "hw/s390x/cpu-topology.h"
static Error *pv_mig_blocker;
@@ -309,10 +310,18 @@ static void s390_cpu_plug(HotplugHandler *hotplug_dev,
{
MachineState *ms = MACHINE(hotplug_dev);
S390CPU *cpu = S390_CPU(dev);
+ ERRP_GUARD();
g_assert(!ms->possible_cpus->cpus[cpu->env.core_id].cpu);
ms->possible_cpus->cpus[cpu->env.core_id].cpu = OBJECT(dev);
+ if (s390_has_topology()) {
+ s390_topology_setup_cpu(ms, cpu, errp);
+ if (*errp) {
+ return;
+ }
+ }
+
if (dev->hotplugged) {
raise_irq_cpu_hotplug();
}
@@ -562,11 +571,20 @@ static const CPUArchIdList *s390_possible_cpu_arch_ids(MachineState *ms)
sizeof(CPUArchId) * max_cpus);
ms->possible_cpus->len = max_cpus;
for (i = 0; i < ms->possible_cpus->len; i++) {
+ CpuInstanceProperties *props = &ms->possible_cpus->cpus[i].props;
+
ms->possible_cpus->cpus[i].type = ms->cpu_type;
ms->possible_cpus->cpus[i].vcpus_count = 1;
ms->possible_cpus->cpus[i].arch_id = i;
- ms->possible_cpus->cpus[i].props.has_core_id = true;
- ms->possible_cpus->cpus[i].props.core_id = i;
+
+ props->has_core_id = true;
+ props->core_id = i;
+ props->has_socket_id = true;
+ props->socket_id = s390_std_socket(i, &ms->smp);
+ props->has_book_id = true;
+ props->book_id = s390_std_book(i, &ms->smp);
+ props->has_drawer_id = true;
+ props->drawer_id = s390_std_drawer(i, &ms->smp);
}
return ms->possible_cpus;
diff --git a/hw/s390x/meson.build b/hw/s390x/meson.build
index 6fd096813a..482fd13420 100644
--- a/hw/s390x/meson.build
+++ b/hw/s390x/meson.build
@@ -23,6 +23,7 @@ s390x_ss.add(when: 'CONFIG_KVM', if_true: files(
's390-skeys-kvm.c',
's390-stattrib-kvm.c',
's390-pci-kvm.c',
+ 'cpu-topology.c',
))
s390x_ss.add(when: 'CONFIG_TCG', if_true: files(
'tod-tcg.c',
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 04/21] target/s390x/cpu topology: handle STSI(15) and build the SYSIB
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (2 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 03/21] s390x/cpu topology: add topology entries on CPU hotplug Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-28 13:05 ` Thomas Huth
2023-09-26 12:15 ` [PATCH v24 05/21] s390x/sclp: reporting the maximum nested topology entries Nina Schoetterl-Glausch
` (16 subsequent siblings)
20 siblings, 1 reply; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
On interception of STSI(15.1.x) the System Information Block
(SYSIB) is built from the list of pre-ordered topology entries.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
MAINTAINERS | 1 +
qapi/machine-target.json | 14 ++
include/hw/s390x/cpu-topology.h | 23 +++
include/hw/s390x/sclp.h | 1 +
target/s390x/cpu.h | 75 +++++++
hw/s390x/cpu-topology.c | 2 +
target/s390x/kvm/kvm.c | 5 +-
target/s390x/kvm/stsi-topology.c | 339 +++++++++++++++++++++++++++++++
target/s390x/kvm/meson.build | 3 +-
9 files changed, 461 insertions(+), 2 deletions(-)
create mode 100644 target/s390x/kvm/stsi-topology.c
diff --git a/MAINTAINERS b/MAINTAINERS
index c5a5303f61..447bf8ac20 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1696,6 +1696,7 @@ M: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
S: Supported
F: include/hw/s390x/cpu-topology.h
F: hw/s390x/cpu-topology.c
+F: target/s390x/kvm/stsi-topology.c
X86 Machines
------------
diff --git a/qapi/machine-target.json b/qapi/machine-target.json
index f0a6b72414..93cbf1c128 100644
--- a/qapi/machine-target.json
+++ b/qapi/machine-target.json
@@ -361,3 +361,17 @@
'TARGET_MIPS',
'TARGET_LOONGARCH64',
'TARGET_RISCV' ] } }
+
+##
+# @CpuS390Polarization:
+#
+# An enumeration of CPU polarization that can be assumed by a virtual
+# S390 CPU
+#
+# Since: 8.2
+##
+{ 'enum': 'CpuS390Polarization',
+ 'prefix': 'S390_CPU_POLARIZATION',
+ 'data': [ 'horizontal', 'vertical' ],
+ 'if': 'TARGET_S390X'
+}
diff --git a/include/hw/s390x/cpu-topology.h b/include/hw/s390x/cpu-topology.h
index 97b0af2795..350c7ea8aa 100644
--- a/include/hw/s390x/cpu-topology.h
+++ b/include/hw/s390x/cpu-topology.h
@@ -15,10 +15,33 @@
#include "hw/boards.h"
#include "qapi/qapi-types-machine-target.h"
+#define S390_TOPOLOGY_CPU_IFL 0x03
+
+typedef struct s390_topology_id {
+ uint8_t sentinel;
+ uint8_t drawer;
+ uint8_t book;
+ uint8_t socket;
+ uint8_t type;
+ uint8_t vertical:1;
+ uint8_t entitlement:2;
+ uint8_t dedicated;
+ uint8_t origin;
+} s390_topology_id;
+
+typedef struct S390TopologyEntry {
+ QTAILQ_ENTRY(S390TopologyEntry) next;
+ s390_topology_id id;
+ uint64_t mask;
+} S390TopologyEntry;
+
typedef struct S390Topology {
uint8_t *cores_per_socket;
+ CpuS390Polarization polarization;
} S390Topology;
+typedef QTAILQ_HEAD(, S390TopologyEntry) S390TopologyList;
+
#ifdef CONFIG_KVM
bool s390_has_topology(void);
void s390_topology_setup_cpu(MachineState *ms, S390CPU *cpu, Error **errp);
diff --git a/include/hw/s390x/sclp.h b/include/hw/s390x/sclp.h
index cf1f2efae2..c49051e17e 100644
--- a/include/hw/s390x/sclp.h
+++ b/include/hw/s390x/sclp.h
@@ -112,6 +112,7 @@ typedef struct CPUEntry {
} QEMU_PACKED CPUEntry;
#define SCLP_READ_SCP_INFO_FIXED_CPU_OFFSET 128
+#define SCLP_READ_SCP_INFO_MNEST 2
typedef struct ReadInfo {
SCCBHeader h;
uint16_t rnmax;
diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
index dfcc1aa1fc..c1ba5c46d6 100644
--- a/target/s390x/cpu.h
+++ b/target/s390x/cpu.h
@@ -571,6 +571,29 @@ typedef struct SysIB_322 {
} SysIB_322;
QEMU_BUILD_BUG_ON(sizeof(SysIB_322) != 4096);
+/*
+ * Topology Magnitude fields (MAG) indicates the maximum number of
+ * topology list entries (TLE) at the corresponding nesting level.
+ */
+#define S390_TOPOLOGY_MAG 6
+#define S390_TOPOLOGY_MAG6 0
+#define S390_TOPOLOGY_MAG5 1
+#define S390_TOPOLOGY_MAG4 2
+#define S390_TOPOLOGY_MAG3 3
+#define S390_TOPOLOGY_MAG2 4
+#define S390_TOPOLOGY_MAG1 5
+/* Configuration topology */
+typedef struct SysIB_151x {
+ uint8_t reserved0[2];
+ uint16_t length;
+ uint8_t mag[S390_TOPOLOGY_MAG];
+ uint8_t reserved1;
+ uint8_t mnest;
+ uint32_t reserved2;
+ char tle[];
+} SysIB_151x;
+QEMU_BUILD_BUG_ON(sizeof(SysIB_151x) != 16);
+
typedef union SysIB {
SysIB_111 sysib_111;
SysIB_121 sysib_121;
@@ -578,9 +601,61 @@ typedef union SysIB {
SysIB_221 sysib_221;
SysIB_222 sysib_222;
SysIB_322 sysib_322;
+ SysIB_151x sysib_151x;
} SysIB;
QEMU_BUILD_BUG_ON(sizeof(SysIB) != 4096);
+/*
+ * CPU Topology List provided by STSI with fc=15 provides a list
+ * of two different Topology List Entries (TLE) types to specify
+ * the topology hierarchy.
+ *
+ * - Container Topology List Entry
+ * Defines a container to contain other Topology List Entries
+ * of any type, nested containers or CPU.
+ * - CPU Topology List Entry
+ * Specifies the CPUs position, type, entitlement and polarization
+ * of the CPUs contained in the last Container TLE.
+ *
+ * There can be theoretically up to five levels of containers, QEMU
+ * uses only three levels, the drawer's, book's and socket's level.
+ *
+ * A container with a nesting level (NL) greater than 1 can only
+ * contain another container of nesting level NL-1.
+ *
+ * A container of nesting level 1 (socket), contains as many CPU TLE
+ * as needed to describe the position and qualities of all CPUs inside
+ * the container.
+ * The qualities of a CPU are polarization, entitlement and type.
+ *
+ * The CPU TLE defines the position of the CPUs of identical qualities
+ * using a 64bits mask which first bit has its offset defined by
+ * the CPU address origin field of the CPU TLE like in:
+ * CPU address = origin * 64 + bit position within the mask
+ */
+/* Container type Topology List Entry */
+typedef struct SYSIBContainerListEntry {
+ uint8_t nl;
+ uint8_t reserved[6];
+ uint8_t id;
+} SYSIBContainerListEntry;
+QEMU_BUILD_BUG_ON(sizeof(SYSIBContainerListEntry) != 8);
+
+/* CPU type Topology List Entry */
+typedef struct SysIBCPUListEntry {
+ uint8_t nl;
+ uint8_t reserved0[3];
+#define SYSIB_TLE_POLARITY_MASK 0x03
+#define SYSIB_TLE_DEDICATED 0x04
+ uint8_t flags;
+ uint8_t type;
+ uint16_t origin;
+ uint64_t mask;
+} SysIBCPUListEntry;
+QEMU_BUILD_BUG_ON(sizeof(SysIBCPUListEntry) != 16);
+
+void insert_stsi_15_1_x(S390CPU *cpu, int sel2, uint64_t addr, uint8_t ar, uintptr_t ra);
+
/* MMU defines */
#define ASCE_ORIGIN (~0xfffULL) /* segment table origin */
#define ASCE_SUBSPACE 0x200 /* subspace group control */
diff --git a/hw/s390x/cpu-topology.c b/hw/s390x/cpu-topology.c
index 189fcc5334..9bf13a6ebf 100644
--- a/hw/s390x/cpu-topology.c
+++ b/hw/s390x/cpu-topology.c
@@ -28,10 +28,12 @@
* s390_topology is used to keep the topology information.
* .cores_per_socket: tracks information on the count of cores
* per socket.
+ * .polarization: tracks machine polarization.
*/
S390Topology s390_topology = {
/* will be initialized after the CPU model is realized */
.cores_per_socket = NULL,
+ .polarization = S390_CPU_POLARIZATION_HORIZONTAL,
};
/**
diff --git a/target/s390x/kvm/kvm.c b/target/s390x/kvm/kvm.c
index bc5c56a305..53d6300809 100644
--- a/target/s390x/kvm/kvm.c
+++ b/target/s390x/kvm/kvm.c
@@ -1911,9 +1911,12 @@ static int handle_stsi(S390CPU *cpu)
if (run->s390_stsi.sel1 != 2 || run->s390_stsi.sel2 != 2) {
return 0;
}
- /* Only sysib 3.2.2 needs post-handling for now. */
insert_stsi_3_2_2(cpu, run->s390_stsi.addr, run->s390_stsi.ar);
return 0;
+ case 15:
+ insert_stsi_15_1_x(cpu, run->s390_stsi.sel2, run->s390_stsi.addr,
+ run->s390_stsi.ar, RA_IGNORED);
+ return 0;
default:
return 0;
}
diff --git a/target/s390x/kvm/stsi-topology.c b/target/s390x/kvm/stsi-topology.c
new file mode 100644
index 0000000000..67ecc67184
--- /dev/null
+++ b/target/s390x/kvm/stsi-topology.c
@@ -0,0 +1,339 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * QEMU S390x CPU Topology
+ *
+ * Copyright IBM Corp. 2022, 2023
+ * Author(s): Pierre Morel <pmorel@linux.ibm.com>
+ *
+ */
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "hw/s390x/sclp.h"
+#include "hw/s390x/cpu-topology.h"
+
+QEMU_BUILD_BUG_ON(S390_CPU_ENTITLEMENT_LOW != 1);
+QEMU_BUILD_BUG_ON(S390_CPU_ENTITLEMENT_MEDIUM != 2);
+QEMU_BUILD_BUG_ON(S390_CPU_ENTITLEMENT_HIGH != 3);
+
+/**
+ * fill_container:
+ * @p: The address of the container TLE to fill
+ * @level: The level of nesting for this container
+ * @id: The container receives a unique ID inside its own container
+ *
+ * Returns the next free TLE entry.
+ */
+static char *fill_container(char *p, int level, int id)
+{
+ SYSIBContainerListEntry *tle = (SYSIBContainerListEntry *)p;
+
+ tle->nl = level;
+ tle->id = id;
+ return p + sizeof(*tle);
+}
+
+/**
+ * fill_tle_cpu:
+ * @p: The address of the CPU TLE to fill
+ * @entry: a pointer to the S390TopologyEntry defining this
+ * CPU container.
+ *
+ * Returns the next free TLE entry.
+ */
+static char *fill_tle_cpu(char *p, S390TopologyEntry *entry)
+{
+ SysIBCPUListEntry *tle = (SysIBCPUListEntry *)p;
+ s390_topology_id topology_id = entry->id;
+
+ tle->nl = 0;
+ tle->flags = 0;
+ if (topology_id.vertical) {
+ tle->flags |= topology_id.entitlement;
+ }
+ if (topology_id.dedicated) {
+ tle->flags |= SYSIB_TLE_DEDICATED;
+ }
+ tle->type = topology_id.type;
+ tle->origin = cpu_to_be16(topology_id.origin * 64);
+ tle->mask = cpu_to_be64(entry->mask);
+ return p + sizeof(*tle);
+}
+
+/*
+ * Macro to check that the size of data after increment
+ * will not get bigger than the size of the SysIB.
+ */
+#define SYSIB_GUARD(data, x) do { \
+ data += x; \
+ if (data > sizeof(SysIB)) { \
+ return 0; \
+ } \
+ } while (0)
+
+/**
+ * stsi_topology_fill_sysib:
+ * @p: A pointer to the position of the first TLE
+ * @level: The nested level wanted by the guest
+ *
+ * Fill the SYSIB with the topology information as described in
+ * the PoP, nesting containers as appropriate, with the maximum
+ * nesting limited by @level.
+ *
+ * Return value:
+ * On success: the size of the SysIB_15x after being filled with TLE.
+ * On error: 0 in the case we would overrun the end of the SysIB.
+ */
+static int stsi_topology_fill_sysib(S390TopologyList *topology_list,
+ char *p, int level)
+{
+ S390TopologyEntry *entry;
+ int last_drawer = -1;
+ int last_book = -1;
+ int last_socket = -1;
+ int drawer_id = 0;
+ int book_id = 0;
+ int socket_id = 0;
+ int n = sizeof(SysIB_151x);
+
+ QTAILQ_FOREACH(entry, topology_list, next) {
+ bool drawer_change = last_drawer != entry->id.drawer;
+ bool book_change = drawer_change || last_book != entry->id.book;
+ bool socket_change = book_change || last_socket != entry->id.socket;
+
+ if (level > 3 && drawer_change) {
+ SYSIB_GUARD(n, sizeof(SYSIBContainerListEntry));
+ p = fill_container(p, 3, drawer_id++);
+ book_id = 0;
+ }
+ if (level > 2 && book_change) {
+ SYSIB_GUARD(n, sizeof(SYSIBContainerListEntry));
+ p = fill_container(p, 2, book_id++);
+ socket_id = 0;
+ }
+ if (socket_change) {
+ SYSIB_GUARD(n, sizeof(SYSIBContainerListEntry));
+ p = fill_container(p, 1, socket_id++);
+ }
+
+ SYSIB_GUARD(n, sizeof(SysIBCPUListEntry));
+ p = fill_tle_cpu(p, entry);
+ last_drawer = entry->id.drawer;
+ last_book = entry->id.book;
+ last_socket = entry->id.socket;
+ }
+
+ return n;
+}
+
+/**
+ * setup_stsi:
+ * @topology_list: ordered list of groups of CPUs with same properties
+ * @sysib: pointer to a SysIB to be filled with SysIB_151x data
+ * @level: Nested level specified by the guest
+ *
+ * Setup the SYSIB for STSI 15.1, the header as well as the description
+ * of the topology.
+ */
+static int setup_stsi(S390TopologyList *topology_list, SysIB_151x *sysib,
+ int level)
+{
+ sysib->mnest = level;
+ switch (level) {
+ case 4:
+ sysib->mag[S390_TOPOLOGY_MAG4] = current_machine->smp.drawers;
+ sysib->mag[S390_TOPOLOGY_MAG3] = current_machine->smp.books;
+ sysib->mag[S390_TOPOLOGY_MAG2] = current_machine->smp.sockets;
+ sysib->mag[S390_TOPOLOGY_MAG1] = current_machine->smp.cores;
+ break;
+ case 3:
+ sysib->mag[S390_TOPOLOGY_MAG3] = current_machine->smp.drawers *
+ current_machine->smp.books;
+ sysib->mag[S390_TOPOLOGY_MAG2] = current_machine->smp.sockets;
+ sysib->mag[S390_TOPOLOGY_MAG1] = current_machine->smp.cores;
+ break;
+ case 2:
+ sysib->mag[S390_TOPOLOGY_MAG2] = current_machine->smp.drawers *
+ current_machine->smp.books *
+ current_machine->smp.sockets;
+ sysib->mag[S390_TOPOLOGY_MAG1] = current_machine->smp.cores;
+ break;
+ }
+
+ return stsi_topology_fill_sysib(topology_list, sysib->tle, level);
+}
+
+/**
+ * s390_topology_add_cpu_to_entry:
+ * @entry: Topology entry to setup
+ * @cpu: the S390CPU to add
+ *
+ * Set the core bit inside the topology mask.
+ */
+static void s390_topology_add_cpu_to_entry(S390TopologyEntry *entry,
+ S390CPU *cpu)
+{
+ set_bit(63 - (cpu->env.core_id % 64), &entry->mask);
+}
+
+/**
+ * s390_topology_from_cpu:
+ * @cpu: S390CPU to calculate the topology id
+ *
+ * Initialize the topology id from the CPU environment.
+ */
+static s390_topology_id s390_topology_from_cpu(S390CPU *cpu)
+{
+ s390_topology_id topology_id = {
+ .drawer = cpu->env.drawer_id,
+ .book = cpu->env.book_id,
+ .socket = cpu->env.socket_id,
+ .type = S390_TOPOLOGY_CPU_IFL,
+ .vertical = s390_topology.polarization == S390_CPU_POLARIZATION_VERTICAL,
+ .entitlement = cpu->env.entitlement,
+ .dedicated = cpu->env.dedicated,
+ .origin = cpu->env.core_id / 64,
+ };
+
+ return topology_id;
+}
+
+/**
+ * s390_topology_id_cmp:
+ * @l: first s390_topology_id
+ * @r: second s390_topology_id
+ *
+ * Compare two topology ids according to the sorting order specified by the PoP.
+ *
+ * Returns a negative number if the first id is less than, 0 if it is equal to
+ * and positive if it is larger than the second id.
+ */
+static int s390_topology_id_cmp(const s390_topology_id *l,
+ const s390_topology_id *r)
+{
+ /*
+ * lexical order, compare less significant values only if more significant
+ * ones are equal
+ */
+ return l->sentinel - r->sentinel ?:
+ l->drawer - r->drawer ?:
+ l->book - r->book ?:
+ l->socket - r->socket ?:
+ l->type - r->type ?:
+ /* logic is inverted for the next three */
+ r->vertical - l->vertical ?:
+ r->entitlement - l->entitlement ?:
+ r->dedicated - l->dedicated ?:
+ l->origin - r->origin;
+}
+
+static bool s390_topology_id_eq(const s390_topology_id *l,
+ const s390_topology_id *r)
+{
+ return !s390_topology_id_cmp(l, r);
+}
+
+static bool s390_topology_id_lt(const s390_topology_id *l,
+ const s390_topology_id *r)
+{
+ return s390_topology_id_cmp(l, r) < 0;
+}
+
+/**
+ * s390_topology_fill_list_sorted:
+ * @topology_list: list to fill
+ *
+ * Loop over all CPU and insert it at the right place
+ * inside the TLE entry list.
+ * Fill the S390Topology list with entries according to the order
+ * specified by the PoP.
+ */
+static void s390_topology_fill_list_sorted(S390TopologyList *topology_list)
+{
+ CPUState *cs;
+ S390TopologyEntry sentinel = { .id.sentinel = 1 };
+
+ QTAILQ_INIT(topology_list);
+
+ QTAILQ_INSERT_HEAD(topology_list, &sentinel, next);
+
+ CPU_FOREACH(cs) {
+ s390_topology_id id = s390_topology_from_cpu(S390_CPU(cs));
+ S390TopologyEntry *entry = NULL, *tmp;
+
+ QTAILQ_FOREACH(tmp, topology_list, next) {
+ if (s390_topology_id_eq(&id, &tmp->id)) {
+ entry = tmp;
+ break;
+ } else if (s390_topology_id_lt(&id, &tmp->id)) {
+ entry = g_malloc0(sizeof(*entry));
+ entry->id = id;
+ QTAILQ_INSERT_BEFORE(tmp, entry, next);
+ break;
+ }
+ }
+ assert(entry);
+ s390_topology_add_cpu_to_entry(entry, S390_CPU(cs));
+ }
+
+ QTAILQ_REMOVE(topology_list, &sentinel, next);
+}
+
+/**
+ * s390_topology_empty_list:
+ *
+ * Clear all entries in the S390Topology list.
+ */
+static void s390_topology_empty_list(S390TopologyList *topology_list)
+{
+ S390TopologyEntry *entry = NULL;
+ S390TopologyEntry *tmp = NULL;
+
+ QTAILQ_FOREACH_SAFE(entry, topology_list, next, tmp) {
+ QTAILQ_REMOVE(topology_list, entry, next);
+ g_free(entry);
+ }
+}
+
+/**
+ * insert_stsi_15_1_x:
+ * @cpu: the CPU doing the call for which we set CC
+ * @sel2: the selector 2, containing the nested level
+ * @addr: Guest logical address of the guest SysIB
+ * @ar: the access register number
+ * @ra: the return address
+ *
+ * Emulate STSI 15.1.x, that is, perform all necessary checks and
+ * fill the SYSIB.
+ * In case the topology description is too long to fit into the SYSIB,
+ * set CC=3 and abort without writing the SYSIB.
+ */
+void insert_stsi_15_1_x(S390CPU *cpu, int sel2, uint64_t addr, uint8_t ar, uintptr_t ra)
+{
+ S390TopologyList topology_list;
+ SysIB sysib = {0};
+ int length;
+
+ if (!s390_has_topology() || sel2 < 2 || sel2 > SCLP_READ_SCP_INFO_MNEST) {
+ setcc(cpu, 3);
+ return;
+ }
+
+ s390_topology_fill_list_sorted(&topology_list);
+
+ length = setup_stsi(&topology_list, &sysib.sysib_151x, sel2);
+
+ if (!length) {
+ s390_topology_empty_list(&topology_list);
+ setcc(cpu, 3);
+ return;
+ }
+
+ sysib.sysib_151x.length = cpu_to_be16(length);
+ if (!s390_cpu_virt_mem_write(cpu, addr, ar, &sysib, length)) {
+ setcc(cpu, 0);
+ } else {
+ s390_cpu_virt_mem_handle_exc(cpu, ra);
+ }
+
+ s390_topology_empty_list(&topology_list);
+}
diff --git a/target/s390x/kvm/meson.build b/target/s390x/kvm/meson.build
index d6aca590ae..588a9aa737 100644
--- a/target/s390x/kvm/meson.build
+++ b/target/s390x/kvm/meson.build
@@ -1,7 +1,8 @@
s390x_ss.add(when: 'CONFIG_KVM', if_true: files(
'pv.c',
- 'kvm.c'
+ 'kvm.c',
+ 'stsi-topology.c'
), if_false: files(
'stubs.c'
))
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 05/21] s390x/sclp: reporting the maximum nested topology entries
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (3 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 04/21] target/s390x/cpu topology: handle STSI(15) and build the SYSIB Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 06/21] s390x/cpu topology: resetting the Topology-Change-Report Nina Schoetterl-Glausch
` (15 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
The maximum nested topology entries is used by the guest to
know how many nested topology are available on the machine.
Let change the MNEST value from 2 to 4 in the SCLP READ INFO
structure now that we support books and drawers.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
include/hw/s390x/sclp.h | 5 +++--
hw/s390x/sclp.c | 5 +++++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/include/hw/s390x/sclp.h b/include/hw/s390x/sclp.h
index c49051e17e..9aef6d9370 100644
--- a/include/hw/s390x/sclp.h
+++ b/include/hw/s390x/sclp.h
@@ -112,12 +112,13 @@ typedef struct CPUEntry {
} QEMU_PACKED CPUEntry;
#define SCLP_READ_SCP_INFO_FIXED_CPU_OFFSET 128
-#define SCLP_READ_SCP_INFO_MNEST 2
+#define SCLP_READ_SCP_INFO_MNEST 4
typedef struct ReadInfo {
SCCBHeader h;
uint16_t rnmax;
uint8_t rnsize;
- uint8_t _reserved1[16 - 11]; /* 11-15 */
+ uint8_t _reserved1[15 - 11]; /* 11-14 */
+ uint8_t stsi_parm; /* 15-15 */
uint16_t entries_cpu; /* 16-17 */
uint16_t offset_cpu; /* 18-19 */
uint8_t _reserved2[24 - 20]; /* 20-23 */
diff --git a/hw/s390x/sclp.c b/hw/s390x/sclp.c
index eff74479f4..d339cbb7e4 100644
--- a/hw/s390x/sclp.c
+++ b/hw/s390x/sclp.c
@@ -20,6 +20,7 @@
#include "hw/s390x/event-facility.h"
#include "hw/s390x/s390-pci-bus.h"
#include "hw/s390x/ipl.h"
+#include "hw/s390x/cpu-topology.h"
static inline SCLPDevice *get_sclp_device(void)
{
@@ -123,6 +124,10 @@ static void read_SCP_info(SCLPDevice *sclp, SCCB *sccb)
return;
}
+ if (s390_has_topology()) {
+ read_info->stsi_parm = SCLP_READ_SCP_INFO_MNEST;
+ }
+
/* CPU information */
prepare_cpu_entries(machine, entries_start, &cpu_count);
read_info->entries_cpu = cpu_to_be16(cpu_count);
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 06/21] s390x/cpu topology: resetting the Topology-Change-Report
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (4 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 05/21] s390x/sclp: reporting the maximum nested topology entries Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 07/21] s390x/cpu topology: interception of PTF instruction Nina Schoetterl-Glausch
` (14 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
During a subsystem reset the Topology-Change-Report is cleared
by the machine.
Let's ask KVM to clear the Modified Topology Change Report (MTCR)
bit of the SCA in the case of a subsystem reset.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
include/hw/s390x/cpu-topology.h | 1 +
target/s390x/cpu.h | 1 +
target/s390x/kvm/kvm_s390x.h | 1 +
hw/s390x/cpu-topology.c | 11 +++++++++++
hw/s390x/s390-virtio-ccw.c | 3 +++
target/s390x/cpu-sysemu.c | 13 +++++++++++++
target/s390x/kvm/kvm.c | 17 +++++++++++++++++
7 files changed, 47 insertions(+)
diff --git a/include/hw/s390x/cpu-topology.h b/include/hw/s390x/cpu-topology.h
index 350c7ea8aa..196c9afb3f 100644
--- a/include/hw/s390x/cpu-topology.h
+++ b/include/hw/s390x/cpu-topology.h
@@ -56,6 +56,7 @@ static inline void s390_topology_setup_cpu(MachineState *ms,
#endif
extern S390Topology s390_topology;
+void s390_topology_reset(void);
static inline int s390_std_socket(int n, CpuTopology *smp)
{
diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
index c1ba5c46d6..2722e7c450 100644
--- a/target/s390x/cpu.h
+++ b/target/s390x/cpu.h
@@ -655,6 +655,7 @@ typedef struct SysIBCPUListEntry {
QEMU_BUILD_BUG_ON(sizeof(SysIBCPUListEntry) != 16);
void insert_stsi_15_1_x(S390CPU *cpu, int sel2, uint64_t addr, uint8_t ar, uintptr_t ra);
+void s390_cpu_topology_set_changed(bool changed);
/* MMU defines */
#define ASCE_ORIGIN (~0xfffULL) /* segment table origin */
diff --git a/target/s390x/kvm/kvm_s390x.h b/target/s390x/kvm/kvm_s390x.h
index f9785564d0..649dae5948 100644
--- a/target/s390x/kvm/kvm_s390x.h
+++ b/target/s390x/kvm/kvm_s390x.h
@@ -47,5 +47,6 @@ void kvm_s390_crypto_reset(void);
void kvm_s390_restart_interrupt(S390CPU *cpu);
void kvm_s390_stop_interrupt(S390CPU *cpu);
void kvm_s390_set_diag318(CPUState *cs, uint64_t diag318_info);
+int kvm_s390_topology_set_mtcr(uint64_t attr);
#endif /* KVM_S390X_H */
diff --git a/hw/s390x/cpu-topology.c b/hw/s390x/cpu-topology.c
index 9bf13a6ebf..03de3d3d10 100644
--- a/hw/s390x/cpu-topology.c
+++ b/hw/s390x/cpu-topology.c
@@ -90,6 +90,17 @@ static void s390_topology_init(MachineState *ms)
smp->books * smp->drawers);
}
+/**
+ * s390_topology_reset:
+ *
+ * Generic reset for CPU topology, calls s390_topology_reset()
+ * to reset the kernel Modified Topology Change Record.
+ */
+void s390_topology_reset(void)
+{
+ s390_cpu_topology_set_changed(false);
+}
+
/**
* s390_topology_cpu_default:
* @cpu: pointer to a S390CPU
diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
index 7fe2bce20c..6012165d41 100644
--- a/hw/s390x/s390-virtio-ccw.c
+++ b/hw/s390x/s390-virtio-ccw.c
@@ -124,6 +124,9 @@ static void subsystem_reset(void)
device_cold_reset(dev);
}
}
+ if (s390_has_topology()) {
+ s390_topology_reset();
+ }
}
static int virtio_ccw_hcall_notify(const uint64_t *args)
diff --git a/target/s390x/cpu-sysemu.c b/target/s390x/cpu-sysemu.c
index 8112561e5e..1cd30c1d84 100644
--- a/target/s390x/cpu-sysemu.c
+++ b/target/s390x/cpu-sysemu.c
@@ -307,3 +307,16 @@ void s390_do_cpu_set_diag318(CPUState *cs, run_on_cpu_data arg)
kvm_s390_set_diag318(cs, arg.host_ulong);
}
}
+
+void s390_cpu_topology_set_changed(bool changed)
+{
+ int ret;
+
+ if (kvm_enabled()) {
+ ret = kvm_s390_topology_set_mtcr(changed);
+ if (ret) {
+ error_report("Failed to set Modified Topology Change Report: %s",
+ strerror(-ret));
+ }
+ }
+}
diff --git a/target/s390x/kvm/kvm.c b/target/s390x/kvm/kvm.c
index 53d6300809..d6bda3a2a8 100644
--- a/target/s390x/kvm/kvm.c
+++ b/target/s390x/kvm/kvm.c
@@ -2664,6 +2664,23 @@ int kvm_s390_get_zpci_op(void)
return cap_zpci_op;
}
+int kvm_s390_topology_set_mtcr(uint64_t attr)
+{
+ struct kvm_device_attr attribute = {
+ .group = KVM_S390_VM_CPU_TOPOLOGY,
+ .attr = attr,
+ };
+
+ if (!s390_has_feat(S390_FEAT_CONFIGURATION_TOPOLOGY)) {
+ return 0;
+ }
+ if (!kvm_vm_check_attr(kvm_state, KVM_S390_VM_CPU_TOPOLOGY, attr)) {
+ return -ENOTSUP;
+ }
+
+ return kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attribute);
+}
+
void kvm_arch_accel_class_init(ObjectClass *oc)
{
}
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 07/21] s390x/cpu topology: interception of PTF instruction
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (5 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 06/21] s390x/cpu topology: resetting the Topology-Change-Report Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 08/21] target/s390x/cpu topology: activate CPU topology Nina Schoetterl-Glausch
` (13 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
When the host supports the CPU topology facility, the PTF
instruction with function code 2 is interpreted by the SIE,
provided that the userland hypervisor activates the interpretation
by using the KVM_CAP_S390_CPU_TOPOLOGY KVM extension.
The PTF instructions with function code 0 and 1 are intercepted
and must be emulated by the userland hypervisor.
During RESET all CPU of the configuration are placed in
horizontal polarity.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
include/hw/s390x/s390-virtio-ccw.h | 6 ++++
hw/s390x/cpu-topology.c | 55 ++++++++++++++++++++++++++++++
target/s390x/kvm/kvm.c | 11 ++++++
3 files changed, 72 insertions(+)
diff --git a/include/hw/s390x/s390-virtio-ccw.h b/include/hw/s390x/s390-virtio-ccw.h
index 9bba21a916..c1d46e78af 100644
--- a/include/hw/s390x/s390-virtio-ccw.h
+++ b/include/hw/s390x/s390-virtio-ccw.h
@@ -30,6 +30,12 @@ struct S390CcwMachineState {
uint8_t loadparm[8];
};
+#define S390_PTF_REASON_NONE (0x00 << 8)
+#define S390_PTF_REASON_DONE (0x01 << 8)
+#define S390_PTF_REASON_BUSY (0x02 << 8)
+#define S390_TOPO_FC_MASK 0xffUL
+void s390_handle_ptf(S390CPU *cpu, uint8_t r1, uintptr_t ra);
+
struct S390CcwMachineClass {
/*< private >*/
MachineClass parent_class;
diff --git a/hw/s390x/cpu-topology.c b/hw/s390x/cpu-topology.c
index 03de3d3d10..c34581964f 100644
--- a/hw/s390x/cpu-topology.c
+++ b/hw/s390x/cpu-topology.c
@@ -90,6 +90,60 @@ static void s390_topology_init(MachineState *ms)
smp->books * smp->drawers);
}
+/*
+ * s390_handle_ptf:
+ *
+ * @register 1: contains the function code
+ *
+ * Function codes 0 (horizontal) and 1 (vertical) define the CPU
+ * polarization requested by the guest.
+ *
+ * Function code 2 is handling topology changes and is interpreted
+ * by the SIE.
+ */
+void s390_handle_ptf(S390CPU *cpu, uint8_t r1, uintptr_t ra)
+{
+ CpuS390Polarization polarization;
+ CPUS390XState *env = &cpu->env;
+ uint64_t reg = env->regs[r1];
+ int fc = reg & S390_TOPO_FC_MASK;
+
+ if (!s390_has_feat(S390_FEAT_CONFIGURATION_TOPOLOGY)) {
+ s390_program_interrupt(env, PGM_OPERATION, ra);
+ return;
+ }
+
+ if (env->psw.mask & PSW_MASK_PSTATE) {
+ s390_program_interrupt(env, PGM_PRIVILEGED, ra);
+ return;
+ }
+
+ if (reg & ~S390_TOPO_FC_MASK) {
+ s390_program_interrupt(env, PGM_SPECIFICATION, ra);
+ return;
+ }
+
+ polarization = S390_CPU_POLARIZATION_VERTICAL;
+ switch (fc) {
+ case 0:
+ polarization = S390_CPU_POLARIZATION_HORIZONTAL;
+ /* fallthrough */
+ case 1:
+ if (s390_topology.polarization == polarization) {
+ env->regs[r1] |= S390_PTF_REASON_DONE;
+ setcc(cpu, 2);
+ } else {
+ s390_topology.polarization = polarization;
+ s390_cpu_topology_set_changed(true);
+ setcc(cpu, 0);
+ }
+ break;
+ default:
+ /* Note that fc == 2 is interpreted by the SIE */
+ s390_program_interrupt(env, PGM_SPECIFICATION, ra);
+ }
+}
+
/**
* s390_topology_reset:
*
@@ -99,6 +153,7 @@ static void s390_topology_init(MachineState *ms)
void s390_topology_reset(void)
{
s390_cpu_topology_set_changed(false);
+ s390_topology.polarization = S390_CPU_POLARIZATION_HORIZONTAL;
}
/**
diff --git a/target/s390x/kvm/kvm.c b/target/s390x/kvm/kvm.c
index d6bda3a2a8..4d84dcc018 100644
--- a/target/s390x/kvm/kvm.c
+++ b/target/s390x/kvm/kvm.c
@@ -86,6 +86,7 @@
#define PRIV_B9_EQBS 0x9c
#define PRIV_B9_CLP 0xa0
+#define PRIV_B9_PTF 0xa2
#define PRIV_B9_PCISTG 0xd0
#define PRIV_B9_PCILG 0xd2
#define PRIV_B9_RPCIT 0xd3
@@ -1457,6 +1458,13 @@ static int kvm_mpcifc_service_call(S390CPU *cpu, struct kvm_run *run)
}
}
+static void kvm_handle_ptf(S390CPU *cpu, struct kvm_run *run)
+{
+ uint8_t r1 = (run->s390_sieic.ipb >> 20) & 0x0f;
+
+ s390_handle_ptf(cpu, r1, RA_IGNORED);
+}
+
static int handle_b9(S390CPU *cpu, struct kvm_run *run, uint8_t ipa1)
{
int r = 0;
@@ -1474,6 +1482,9 @@ static int handle_b9(S390CPU *cpu, struct kvm_run *run, uint8_t ipa1)
case PRIV_B9_RPCIT:
r = kvm_rpcit_service_call(cpu, run);
break;
+ case PRIV_B9_PTF:
+ kvm_handle_ptf(cpu, run);
+ break;
case PRIV_B9_EQBS:
/* just inject exception */
r = -1;
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 08/21] target/s390x/cpu topology: activate CPU topology
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (6 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 07/21] s390x/cpu topology: interception of PTF instruction Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 09/21] qapi/s390x/cpu topology: set-cpu-topology qmp command Nina Schoetterl-Glausch
` (12 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
The KVM capability KVM_CAP_S390_CPU_TOPOLOGY is used to
activate the S390_FEAT_CONFIGURATION_TOPOLOGY feature and
the topology facility in the host CPU model for the guest
in the case the topology is available in QEMU and in KVM.
The feature is disabled by default and fenced for SE
(secure execution).
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
hw/s390x/cpu-topology.c | 2 +-
target/s390x/cpu_models.c | 1 +
target/s390x/kvm/kvm.c | 9 +++++++++
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/hw/s390x/cpu-topology.c b/hw/s390x/cpu-topology.c
index c34581964f..13f404a0d7 100644
--- a/hw/s390x/cpu-topology.c
+++ b/hw/s390x/cpu-topology.c
@@ -69,7 +69,7 @@ static int s390_socket_nb(S390CPU *cpu)
*/
bool s390_has_topology(void)
{
- return false;
+ return s390_has_feat(S390_FEAT_CONFIGURATION_TOPOLOGY);
}
/**
diff --git a/target/s390x/cpu_models.c b/target/s390x/cpu_models.c
index 98f14c09c2..4dead48650 100644
--- a/target/s390x/cpu_models.c
+++ b/target/s390x/cpu_models.c
@@ -255,6 +255,7 @@ bool s390_has_feat(S390Feat feat)
case S390_FEAT_SIE_CMMA:
case S390_FEAT_SIE_PFMFI:
case S390_FEAT_SIE_IBS:
+ case S390_FEAT_CONFIGURATION_TOPOLOGY:
return false;
break;
default:
diff --git a/target/s390x/kvm/kvm.c b/target/s390x/kvm/kvm.c
index 4d84dcc018..2e43dc746f 100644
--- a/target/s390x/kvm/kvm.c
+++ b/target/s390x/kvm/kvm.c
@@ -366,6 +366,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
kvm_vm_enable_cap(s, KVM_CAP_S390_USER_SIGP, 0);
kvm_vm_enable_cap(s, KVM_CAP_S390_VECTOR_REGISTERS, 0);
kvm_vm_enable_cap(s, KVM_CAP_S390_USER_STSI, 0);
+ kvm_vm_enable_cap(s, KVM_CAP_S390_CPU_TOPOLOGY, 0);
if (ri_allowed()) {
if (kvm_vm_enable_cap(s, KVM_CAP_S390_RI, 0) == 0) {
cap_ri = 1;
@@ -2509,6 +2510,14 @@ void kvm_s390_get_host_cpu_model(S390CPUModel *model, Error **errp)
set_bit(S390_FEAT_UNPACK, model->features);
}
+ /*
+ * If we have kernel support for CPU Topology indicate the
+ * configuration-topology facility.
+ */
+ if (kvm_check_extension(kvm_state, KVM_CAP_S390_CPU_TOPOLOGY)) {
+ set_bit(S390_FEAT_CONFIGURATION_TOPOLOGY, model->features);
+ }
+
/* We emulate a zPCI bus and AEN, therefore we don't need HW support */
set_bit(S390_FEAT_ZPCI, model->features);
set_bit(S390_FEAT_ADAPTER_EVENT_NOTIFICATION, model->features);
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 09/21] qapi/s390x/cpu topology: set-cpu-topology qmp command
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (7 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 08/21] target/s390x/cpu topology: activate CPU topology Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-28 13:29 ` Thomas Huth
2023-09-26 12:15 ` [PATCH v24 10/21] machine: adding s390 topology to query-cpu-fast Nina Schoetterl-Glausch
` (11 subsequent siblings)
20 siblings, 1 reply; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
The modification of the CPU attributes are done through a monitor
command.
It allows to move the core inside the topology tree to optimize
the cache usage in the case the host's hypervisor previously
moved the CPU.
The same command allows to modify the CPU attributes modifiers
like polarization entitlement and the dedicated attribute to notify
the guest if the host admin modified scheduling or dedication of a vCPU.
With this knowledge the guest has the possibility to optimize the
usage of the vCPUs.
The command has a feature unstable for the moment.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
qapi/machine-target.json | 42 +++++++++++++
hw/s390x/cpu-topology.c | 132 +++++++++++++++++++++++++++++++++++++++
2 files changed, 174 insertions(+)
diff --git a/qapi/machine-target.json b/qapi/machine-target.json
index 93cbf1c128..3fd8390922 100644
--- a/qapi/machine-target.json
+++ b/qapi/machine-target.json
@@ -4,6 +4,8 @@
# This work is licensed under the terms of the GNU GPL, version 2 or later.
# See the COPYING file in the top-level directory.
+{ 'include': 'machine-common.json' }
+
##
# @CpuModelInfo:
#
@@ -375,3 +377,43 @@
'data': [ 'horizontal', 'vertical' ],
'if': 'TARGET_S390X'
}
+
+##
+# @set-cpu-topology:
+#
+# Modifies the topology by moving the CPU inside the topology
+# tree or by changing a modifier attribute of a CPU.
+# Absent values will not be modified.
+#
+# @core-id: the vCPU ID to be moved
+#
+# @socket-id: destination socket to move the vCPU to
+#
+# @book-id: destination book to move the vCPU to
+#
+# @drawer-id: destination drawer to move the vCPU to
+#
+# @entitlement: entitlement to set
+#
+# @dedicated: whether the provisioning of real to virtual CPU is dedicated
+#
+# Features:
+#
+# @unstable: This command may still be modified.
+#
+# Returns: Nothing on success, the reason on failure.
+#
+# Since: 8.2
+##
+{ 'command': 'set-cpu-topology',
+ 'data': {
+ 'core-id': 'uint16',
+ '*socket-id': 'uint16',
+ '*book-id': 'uint16',
+ '*drawer-id': 'uint16',
+ '*entitlement': 'CpuS390Entitlement',
+ '*dedicated': 'bool'
+ },
+ 'features': [ 'unstable' ],
+ 'if': { 'all': [ 'TARGET_S390X' , 'CONFIG_KVM' ] }
+}
diff --git a/hw/s390x/cpu-topology.c b/hw/s390x/cpu-topology.c
index 13f404a0d7..28adfb3f84 100644
--- a/hw/s390x/cpu-topology.c
+++ b/hw/s390x/cpu-topology.c
@@ -23,6 +23,7 @@
#include "target/s390x/cpu.h"
#include "hw/s390x/s390-virtio-ccw.h"
#include "hw/s390x/cpu-topology.h"
+#include "qapi/qapi-commands-machine-target.h"
/*
* s390_topology is used to keep the topology information.
@@ -257,6 +258,29 @@ static bool s390_topology_check(uint16_t socket_id, uint16_t book_id,
return true;
}
+/**
+ * s390_topology_need_report
+ * @cpu: Current cpu
+ * @drawer_id: future drawer ID
+ * @book_id: future book ID
+ * @socket_id: future socket ID
+ * @entitlement: future entitlement
+ * @dedicated: future dedicated
+ *
+ * A modified topology change report is needed if the topology
+ * tree or the topology attributes change.
+ */
+static bool s390_topology_need_report(S390CPU *cpu, int drawer_id,
+ int book_id, int socket_id,
+ uint16_t entitlement, bool dedicated)
+{
+ return cpu->env.drawer_id != drawer_id ||
+ cpu->env.book_id != book_id ||
+ cpu->env.socket_id != socket_id ||
+ cpu->env.entitlement != entitlement ||
+ cpu->env.dedicated != dedicated;
+}
+
/**
* s390_update_cpu_props:
* @ms: the machine state
@@ -325,3 +349,111 @@ void s390_topology_setup_cpu(MachineState *ms, S390CPU *cpu, Error **errp)
/* topology tree is reflected in props */
s390_update_cpu_props(ms, cpu);
}
+
+static void s390_change_topology(uint16_t core_id,
+ bool has_socket_id, uint16_t socket_id,
+ bool has_book_id, uint16_t book_id,
+ bool has_drawer_id, uint16_t drawer_id,
+ bool has_entitlement,
+ CpuS390Entitlement entitlement,
+ bool has_dedicated, bool dedicated,
+ Error **errp)
+{
+ MachineState *ms = current_machine;
+ int old_socket_entry;
+ int new_socket_entry;
+ bool report_needed;
+ S390CPU *cpu;
+
+ cpu = s390_cpu_addr2state(core_id);
+ if (!cpu) {
+ error_setg(errp, "Core-id %d does not exist!", core_id);
+ return;
+ }
+
+ /* Get attributes not provided from cpu and verify the new topology */
+ if (!has_socket_id) {
+ socket_id = cpu->env.socket_id;
+ }
+ if (!has_book_id) {
+ book_id = cpu->env.book_id;
+ }
+ if (!has_drawer_id) {
+ drawer_id = cpu->env.drawer_id;
+ }
+ if (!has_dedicated) {
+ dedicated = cpu->env.dedicated;
+ }
+
+ /*
+ * When the user specifies the entitlement as 'auto' on the command line,
+ * QEMU will set the entitlement as:
+ * Medium when the CPU is not dedicated.
+ * High when dedicated is true.
+ */
+ if (!has_entitlement || entitlement == S390_CPU_ENTITLEMENT_AUTO) {
+ if (dedicated) {
+ entitlement = S390_CPU_ENTITLEMENT_HIGH;
+ } else {
+ entitlement = S390_CPU_ENTITLEMENT_MEDIUM;
+ }
+ }
+
+ if (!s390_topology_check(socket_id, book_id, drawer_id,
+ entitlement, dedicated, errp)) {
+ return;
+ }
+
+ /* Check for space on new socket */
+ old_socket_entry = s390_socket_nb(cpu);
+ new_socket_entry = s390_socket_nb_from_ids(drawer_id, book_id, socket_id);
+
+ if (new_socket_entry != old_socket_entry) {
+ if (s390_topology.cores_per_socket[new_socket_entry] >=
+ ms->smp.cores) {
+ error_setg(errp, "No more space on this socket");
+ return;
+ }
+ /* Update the count of cores in sockets */
+ s390_topology.cores_per_socket[new_socket_entry] += 1;
+ s390_topology.cores_per_socket[old_socket_entry] -= 1;
+ }
+
+ /* Check if we will need to report the modified topology */
+ report_needed = s390_topology_need_report(cpu, drawer_id, book_id,
+ socket_id, entitlement,
+ dedicated);
+
+ /* All checks done, report new topology into the vCPU */
+ cpu->env.drawer_id = drawer_id;
+ cpu->env.book_id = book_id;
+ cpu->env.socket_id = socket_id;
+ cpu->env.dedicated = dedicated;
+ cpu->env.entitlement = entitlement;
+
+ /* topology tree is reflected in props */
+ s390_update_cpu_props(ms, cpu);
+
+ /* Advertise the topology change */
+ if (report_needed) {
+ s390_cpu_topology_set_changed(true);
+ }
+}
+
+void qmp_set_cpu_topology(uint16_t core,
+ bool has_socket, uint16_t socket,
+ bool has_book, uint16_t book,
+ bool has_drawer, uint16_t drawer,
+ bool has_entitlement, CpuS390Entitlement entitlement,
+ bool has_dedicated, bool dedicated,
+ Error **errp)
+{
+ if (!s390_has_topology()) {
+ error_setg(errp, "This machine doesn't support topology");
+ return;
+ }
+
+ s390_change_topology(core, has_socket, socket, has_book, book,
+ has_drawer, drawer, has_entitlement, entitlement,
+ has_dedicated, dedicated, errp);
+}
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 10/21] machine: adding s390 topology to query-cpu-fast
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (8 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 09/21] qapi/s390x/cpu topology: set-cpu-topology qmp command Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 11/21] machine: adding s390 topology to info hotpluggable-cpus Nina Schoetterl-Glausch
` (10 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
S390x provides two more topology attributes, entitlement and dedication.
Let's add these CPU attributes to the QAPI command query-cpu-fast.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
qapi/machine.json | 11 ++++++++++-
target/s390x/cpu.c | 9 +++++++++
2 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/qapi/machine.json b/qapi/machine.json
index 8499d40269..eb2de7acc7 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -57,9 +57,18 @@
#
# @cpu-state: the virtual CPU's state
#
+# @dedicated: the virtual CPU's dedication (since 8.2)
+#
+# @entitlement: the virtual CPU's entitlement (since 8.2)
+#
# Since: 2.12
##
-{ 'struct': 'CpuInfoS390', 'data': { 'cpu-state': 'CpuS390State' } }
+{ 'struct': 'CpuInfoS390',
+ 'data': { 'cpu-state': 'CpuS390State',
+ '*dedicated': 'bool',
+ '*entitlement': 'CpuS390Entitlement'
+ }
+}
##
# @CpuInfoFast:
diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c
index 74405beb51..5967e34a85 100644
--- a/target/s390x/cpu.c
+++ b/target/s390x/cpu.c
@@ -38,6 +38,7 @@
#ifndef CONFIG_USER_ONLY
#include "sysemu/reset.h"
#endif
+#include "hw/s390x/cpu-topology.h"
#define CR0_RESET 0xE0UL
#define CR14_RESET 0xC2000000UL;
@@ -146,6 +147,14 @@ static void s390_query_cpu_fast(CPUState *cpu, CpuInfoFast *value)
S390CPU *s390_cpu = S390_CPU(cpu);
value->u.s390x.cpu_state = s390_cpu->env.cpu_state;
+#if !defined(CONFIG_USER_ONLY)
+ if (s390_has_topology()) {
+ value->u.s390x.has_dedicated = true;
+ value->u.s390x.dedicated = s390_cpu->env.dedicated;
+ value->u.s390x.has_entitlement = true;
+ value->u.s390x.entitlement = s390_cpu->env.entitlement;
+ }
+#endif
}
/* S390CPUClass::reset() */
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 11/21] machine: adding s390 topology to info hotpluggable-cpus
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (9 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 10/21] machine: adding s390 topology to query-cpu-fast Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 12/21] qapi/s390x/cpu topology: CPU_POLARIZATION_CHANGE qapi event Nina Schoetterl-Glausch
` (9 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
S390 topology adds books and drawers topology containers.
Let's add these to the HMP information for hotpluggable cpus.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
hw/core/machine-hmp-cmds.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c
index c3e55ef9e9..9a4b59c6f2 100644
--- a/hw/core/machine-hmp-cmds.c
+++ b/hw/core/machine-hmp-cmds.c
@@ -71,6 +71,12 @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict)
if (c->has_node_id) {
monitor_printf(mon, " node-id: \"%" PRIu64 "\"\n", c->node_id);
}
+ if (c->has_drawer_id) {
+ monitor_printf(mon, " drawer-id: \"%" PRIu64 "\"\n", c->drawer_id);
+ }
+ if (c->has_book_id) {
+ monitor_printf(mon, " book-id: \"%" PRIu64 "\"\n", c->book_id);
+ }
if (c->has_socket_id) {
monitor_printf(mon, " socket-id: \"%" PRIu64 "\"\n", c->socket_id);
}
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 12/21] qapi/s390x/cpu topology: CPU_POLARIZATION_CHANGE qapi event
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (10 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 11/21] machine: adding s390 topology to info hotpluggable-cpus Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 13/21] qapi/s390x/cpu topology: add query-s390x-cpu-polarization command Nina Schoetterl-Glausch
` (8 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
When the guest asks to change the polarization this change
is forwarded to the upper layer using QAPI.
The upper layer is supposed to take according decisions concerning
CPU provisioning.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
qapi/machine-target.json | 34 ++++++++++++++++++++++++++++++++++
hw/s390x/cpu-topology.c | 2 ++
2 files changed, 36 insertions(+)
diff --git a/qapi/machine-target.json b/qapi/machine-target.json
index 3fd8390922..02f1de5d02 100644
--- a/qapi/machine-target.json
+++ b/qapi/machine-target.json
@@ -417,3 +417,37 @@
'features': [ 'unstable' ],
'if': { 'all': [ 'TARGET_S390X' , 'CONFIG_KVM' ] }
}
+
+##
+# @CPU_POLARIZATION_CHANGE:
+#
+# Emitted when the guest asks to change the polarization.
+#
+# The guest can tell the host (via the PTF instruction) whether the
+# CPUs should be provisioned using horizontal or vertical polarization.
+#
+# On horizontal polarization the host is expected to provision all vCPUs
+# equally.
+# On vertical polarization the host can provision each vCPU differently.
+# The guest will get information on the details of the provisioning
+# the next time it uses the STSI(15) instruction.
+#
+# @polarization: polarization specified by the guest
+#
+# Features:
+#
+# @unstable: This event is experimental.
+#
+# Since: 8.2
+#
+# Example:
+#
+# <- { "event": "CPU_POLARIZATION_CHANGE",
+# "data": { "polarization": "horizontal" },
+# "timestamp": { "seconds": 1401385907, "microseconds": 422329 } }
+##
+{ 'event': 'CPU_POLARIZATION_CHANGE',
+ 'data': { 'polarization': 'CpuS390Polarization' },
+ 'features': [ 'unstable' ],
+ 'if': { 'all': [ 'TARGET_S390X', 'CONFIG_KVM' ] }
+}
diff --git a/hw/s390x/cpu-topology.c b/hw/s390x/cpu-topology.c
index 28adfb3f84..18274db74c 100644
--- a/hw/s390x/cpu-topology.c
+++ b/hw/s390x/cpu-topology.c
@@ -24,6 +24,7 @@
#include "hw/s390x/s390-virtio-ccw.h"
#include "hw/s390x/cpu-topology.h"
#include "qapi/qapi-commands-machine-target.h"
+#include "qapi/qapi-events-machine-target.h"
/*
* s390_topology is used to keep the topology information.
@@ -136,6 +137,7 @@ void s390_handle_ptf(S390CPU *cpu, uint8_t r1, uintptr_t ra)
} else {
s390_topology.polarization = polarization;
s390_cpu_topology_set_changed(true);
+ qapi_event_send_cpu_polarization_change(polarization);
setcc(cpu, 0);
}
break;
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 13/21] qapi/s390x/cpu topology: add query-s390x-cpu-polarization command
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (11 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 12/21] qapi/s390x/cpu topology: CPU_POLARIZATION_CHANGE qapi event Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 14/21] docs/s390x/cpu topology: document s390x cpu topology Nina Schoetterl-Glausch
` (7 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
The query-s390x-cpu-polarization qmp command returns the current
CPU polarization of the machine.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
qapi/machine-target.json | 30 ++++++++++++++++++++++++++++++
hw/s390x/cpu-topology.c | 8 ++++++++
2 files changed, 38 insertions(+)
diff --git a/qapi/machine-target.json b/qapi/machine-target.json
index 02f1de5d02..10289835fb 100644
--- a/qapi/machine-target.json
+++ b/qapi/machine-target.json
@@ -451,3 +451,33 @@
'features': [ 'unstable' ],
'if': { 'all': [ 'TARGET_S390X', 'CONFIG_KVM' ] }
}
+
+##
+# @CpuPolarizationInfo:
+#
+# The result of a CPU polarization query.
+#
+# @polarization: the CPU polarization
+#
+# Since: 8.2
+##
+{ 'struct': 'CpuPolarizationInfo',
+ 'data': { 'polarization': 'CpuS390Polarization' },
+ 'if': { 'all': [ 'TARGET_S390X', 'CONFIG_KVM' ] }
+}
+
+##
+# @query-s390x-cpu-polarization:
+#
+# Features:
+#
+# @unstable: This command is experimental.
+#
+# Returns: the machine's CPU polarization
+#
+# Since: 8.2
+##
+{ 'command': 'query-s390x-cpu-polarization', 'returns': 'CpuPolarizationInfo',
+ 'features': [ 'unstable' ],
+ 'if': { 'all': [ 'TARGET_S390X', 'CONFIG_KVM' ] }
+}
diff --git a/hw/s390x/cpu-topology.c b/hw/s390x/cpu-topology.c
index 18274db74c..1561a8ab44 100644
--- a/hw/s390x/cpu-topology.c
+++ b/hw/s390x/cpu-topology.c
@@ -459,3 +459,11 @@ void qmp_set_cpu_topology(uint16_t core,
has_drawer, drawer, has_entitlement, entitlement,
has_dedicated, dedicated, errp);
}
+
+CpuPolarizationInfo *qmp_query_s390x_cpu_polarization(Error **errp)
+{
+ CpuPolarizationInfo *info = g_new0(CpuPolarizationInfo, 1);
+
+ info->polarization = s390_topology.polarization;
+ return info;
+}
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 14/21] docs/s390x/cpu topology: document s390x cpu topology
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (12 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 13/21] qapi/s390x/cpu topology: add query-s390x-cpu-polarization command Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 15/21] tests/avocado: s390x cpu topology core Nina Schoetterl-Glausch
` (6 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
Add some basic examples for the definition of cpu topology
in s390x.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
MAINTAINERS | 2 +
docs/devel/index-internals.rst | 1 +
docs/devel/s390-cpu-topology.rst | 170 ++++++++++++++++++++
docs/system/s390x/cpu-topology.rst | 244 +++++++++++++++++++++++++++++
docs/system/target-s390x.rst | 1 +
qapi/machine.json | 2 +
6 files changed, 420 insertions(+)
create mode 100644 docs/devel/s390-cpu-topology.rst
create mode 100644 docs/system/s390x/cpu-topology.rst
diff --git a/MAINTAINERS b/MAINTAINERS
index 447bf8ac20..c31cec0c26 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1697,6 +1697,8 @@ S: Supported
F: include/hw/s390x/cpu-topology.h
F: hw/s390x/cpu-topology.c
F: target/s390x/kvm/stsi-topology.c
+F: docs/devel/s390-cpu-topology.rst
+F: docs/system/s390x/cpu-topology.rst
X86 Machines
------------
diff --git a/docs/devel/index-internals.rst b/docs/devel/index-internals.rst
index e1a93df263..6f81df92bc 100644
--- a/docs/devel/index-internals.rst
+++ b/docs/devel/index-internals.rst
@@ -14,6 +14,7 @@ Details about QEMU's various subsystems including how to add features to them.
migration
multi-process
reset
+ s390-cpu-topology
s390-dasd-ipl
tracing
vfio-migration
diff --git a/docs/devel/s390-cpu-topology.rst b/docs/devel/s390-cpu-topology.rst
new file mode 100644
index 0000000000..9eab28d5e5
--- /dev/null
+++ b/docs/devel/s390-cpu-topology.rst
@@ -0,0 +1,170 @@
+QAPI interface for S390 CPU topology
+====================================
+
+The following sections will explain the QAPI interface for S390 CPU topology
+with the help of exemplary output.
+For this, let's assume that QEMU has been started with the following
+command, defining 4 CPUs, where CPU[0] is defined by the -smp argument and will
+have default values:
+
+.. code-block:: bash
+
+ qemu-system-s390x \
+ -enable-kvm \
+ -cpu z14,ctop=on \
+ -smp 1,drawers=3,books=3,sockets=2,cores=2,maxcpus=36 \
+ -device z14-s390x-cpu,core-id=19,entitlement=high \
+ -device z14-s390x-cpu,core-id=11,entitlement=low \
+ -device z14-s390x-cpu,core-id=112,entitlement=high \
+ ...
+
+Additions to query-cpus-fast
+----------------------------
+
+The command query-cpus-fast allows querying the topology tree and
+modifiers for all configured vCPUs.
+
+.. code-block:: QMP
+
+ { "execute": "query-cpus-fast" }
+ {
+ "return": [
+ {
+ "dedicated": false,
+ "thread-id": 536993,
+ "props": {
+ "core-id": 0,
+ "socket-id": 0,
+ "drawer-id": 0,
+ "book-id": 0
+ },
+ "cpu-state": "operating",
+ "entitlement": "medium",
+ "qom-path": "/machine/unattached/device[0]",
+ "cpu-index": 0,
+ "target": "s390x"
+ },
+ {
+ "dedicated": false,
+ "thread-id": 537003,
+ "props": {
+ "core-id": 19,
+ "socket-id": 1,
+ "drawer-id": 0,
+ "book-id": 2
+ },
+ "cpu-state": "operating",
+ "entitlement": "high",
+ "qom-path": "/machine/peripheral-anon/device[0]",
+ "cpu-index": 19,
+ "target": "s390x"
+ },
+ {
+ "dedicated": false,
+ "thread-id": 537004,
+ "props": {
+ "core-id": 11,
+ "socket-id": 1,
+ "drawer-id": 0,
+ "book-id": 1
+ },
+ "cpu-state": "operating",
+ "entitlement": "low",
+ "qom-path": "/machine/peripheral-anon/device[1]",
+ "cpu-index": 11,
+ "target": "s390x"
+ },
+ {
+ "dedicated": true,
+ "thread-id": 537005,
+ "props": {
+ "core-id": 112,
+ "socket-id": 0,
+ "drawer-id": 3,
+ "book-id": 2
+ },
+ "cpu-state": "operating",
+ "entitlement": "high",
+ "qom-path": "/machine/peripheral-anon/device[2]",
+ "cpu-index": 112,
+ "target": "s390x"
+ }
+ ]
+ }
+
+
+QAPI command: set-cpu-topology
+------------------------------
+
+The command set-cpu-topology allows modifying the topology tree
+or the topology modifiers of a vCPU in the configuration.
+
+.. code-block:: QMP
+
+ { "execute": "set-cpu-topology",
+ "arguments": {
+ "core-id": 11,
+ "socket-id": 0,
+ "book-id": 0,
+ "drawer-id": 0,
+ "entitlement": "low",
+ "dedicated": false
+ }
+ }
+ {"return": {}}
+
+The core-id parameter is the only mandatory parameter and every
+unspecified parameter keeps its previous value.
+
+QAPI event CPU_POLARIZATION_CHANGE
+----------------------------------
+
+When a guest requests a modification of the polarization,
+QEMU sends a CPU_POLARIZATION_CHANGE event.
+
+When requesting the change, the guest only specifies horizontal or
+vertical polarization.
+It is the job of the entity administrating QEMU to set the dedication and fine
+grained vertical entitlement in response to this event.
+
+Note that a vertical polarized dedicated vCPU can only have a high
+entitlement, giving 6 possibilities for vCPU polarization:
+
+- Horizontal
+- Horizontal dedicated
+- Vertical low
+- Vertical medium
+- Vertical high
+- Vertical high dedicated
+
+Example of the event received when the guest issues the CPU instruction
+Perform Topology Function PTF(0) to request an horizontal polarization:
+
+.. code-block:: QMP
+
+ {
+ "timestamp": {
+ "seconds": 1687870305,
+ "microseconds": 566299
+ },
+ "event": "CPU_POLARIZATION_CHANGE",
+ "data": {
+ "polarization": "horizontal"
+ }
+ }
+
+QAPI query command: query-s390x-cpu-polarization
+------------------------------------------------
+
+The query command query-s390x-cpu-polarization returns the current
+CPU polarization of the machine.
+In this case the guest previously issued a PTF(1) to request vertical polarization:
+
+.. code-block:: QMP
+
+ { "execute": "query-s390x-cpu-polarization" }
+ {
+ "return": {
+ "polarization": "vertical"
+ }
+ }
diff --git a/docs/system/s390x/cpu-topology.rst b/docs/system/s390x/cpu-topology.rst
new file mode 100644
index 0000000000..5133fdc362
--- /dev/null
+++ b/docs/system/s390x/cpu-topology.rst
@@ -0,0 +1,244 @@
+.. _cpu-topology-s390x:
+
+CPU topology on s390x
+=====================
+
+Since QEMU 8.2, CPU topology on s390x provides up to 3 levels of
+topology containers: drawers, books and sockets. They define a
+tree-shaped hierarchy.
+
+The socket container has one or more CPU entries.
+Each of these CPU entries consists of a bitmap and three CPU attributes:
+
+- CPU type
+- entitlement
+- dedication
+
+Each bit set in the bitmap correspond to a core-id of a vCPU with matching
+attributes.
+
+This documentation provides general information on S390 CPU topology,
+how to enable it and explains the new CPU attributes.
+For information on how to modify the S390 CPU topology and how to
+monitor polarization changes, see ``docs/devel/s390-cpu-topology.rst``.
+
+Prerequisites
+-------------
+
+To use the CPU topology, you need to run with KVM on a s390x host that
+uses the Linux kernel v6.0 or newer (which provide the so-called
+``KVM_CAP_S390_CPU_TOPOLOGY`` capability that allows QEMU to signal the
+CPU topology facility via the so-called STFLE bit 11 to the VM).
+
+Enabling CPU topology
+---------------------
+
+Currently, CPU topology is only enabled in the host model by default.
+
+Enabling CPU topology in a CPU model is done by setting the CPU flag
+``ctop`` to ``on`` as in:
+
+.. code-block:: bash
+
+ -cpu gen16b,ctop=on
+
+Having the topology disabled by default allows migration between
+old and new QEMU without adding new flags.
+
+Default topology usage
+----------------------
+
+The CPU topology can be specified on the QEMU command line
+with the ``-smp`` or the ``-device`` QEMU command arguments.
+
+Note also that since 7.2 threads are no longer supported in the topology
+and the ``-smp`` command line argument accepts only ``threads=1``.
+
+If none of the containers attributes (drawers, books, sockets) are
+specified for the ``-smp`` flag, the number of these containers
+is 1.
+
+Thus the following two options will result in the same topology:
+
+.. code-block:: bash
+
+ -smp cpus=5,drawer=1,books=1,sockets=8,cores=4,maxcpus=32
+
+and
+
+.. code-block:: bash
+
+ -smp cpus=5,sockets=8,cores=4,maxcpus=32
+
+When a CPU is defined by the ``-smp`` command argument, its position
+inside the topology is calculated by adding the CPUs to the topology
+based on the core-id starting with core-0 at position 0 of socket-0,
+book-0, drawer-0 and filling all CPUs of socket-0 before filling socket-1
+of book-0 and so on up to the last socket of the last book of the last
+drawer.
+
+When a CPU is defined by the ``-device`` command argument, the
+tree topology attributes must all be defined or all not defined.
+
+.. code-block:: bash
+
+ -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=1
+
+or
+
+.. code-block:: bash
+
+ -device gen16b-s390x-cpu,core-id=1,dedicated=true
+
+If none of the tree attributes (drawer, book, sockets), are specified
+for the ``-device`` argument, like for all CPUs defined with the ``-smp``
+command argument the topology tree attributes will be set by simply
+adding the CPUs to the topology based on the core-id.
+
+QEMU will not try to resolve collisions and will report an error if the
+CPU topology defined explicitly or implicitly on a ``-device``
+argument collides with the definition of a CPU implicitly defined
+on the ``-smp`` argument.
+
+When the topology modifier attributes are not defined for the
+``-device`` command argument they takes following default values:
+
+- dedicated: ``false``
+- entitlement: ``medium``
+
+
+Hot plug
+++++++++
+
+New CPUs can be plugged using the device_add hmp command as in:
+
+.. code-block:: bash
+
+ (qemu) device_add gen16b-s390x-cpu,core-id=9
+
+The placement of the CPU is derived from the core-id as described above.
+
+The topology can of course also be fully defined:
+
+.. code-block:: bash
+
+ (qemu) device_add gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=1
+
+
+Examples
+++++++++
+
+In the following machine we define 8 sockets with 4 cores each.
+
+.. code-block:: bash
+
+ $ qemu-system-s390x -m 2G \
+ -cpu gen16b,ctop=on \
+ -smp cpus=5,sockets=8,cores=4,maxcpus=32 \
+ -device host-s390x-cpu,core-id=14 \
+
+A new CPUs can be plugged using the device_add hmp command as before:
+
+.. code-block:: bash
+
+ (qemu) device_add gen16b-s390x-cpu,core-id=9
+
+The core-id defines the placement of the core in the topology by
+starting with core 0 in socket 0 up to maxcpus.
+
+In the example above:
+
+* There are 5 CPUs provided to the guest with the ``-smp`` command line
+ They will take the core-ids 0,1,2,3,4
+ As we have 4 cores in a socket, we have 4 CPUs provided
+ to the guest in socket 0, with core-ids 0,1,2,3.
+ The last CPU, with core-id 4, will be on socket 1.
+
+* the core with ID 14 provided by the ``-device`` command line will
+ be placed in socket 3, with core-id 14
+
+* the core with ID 9 provided by the ``device_add`` qmp command will
+ be placed in socket 2, with core-id 9
+
+
+Polarization, entitlement and dedication
+----------------------------------------
+
+Polarization
+++++++++++++
+
+The polarization affects how the CPUs of a shared host are utilized/distributed
+among guests.
+The guest determines the polarization by using the PTF instruction.
+
+Polarization defines two models of CPU provisioning: horizontal
+and vertical.
+
+The horizontal polarization is the default model on boot and after
+subsystem reset. When horizontal polarization is in effect all vCPUs should
+have about equal resource provisioning.
+
+In the vertical polarization model vCPUs are unequal, but overall more resources
+might be available.
+The guest can make use of the vCPU entitlement information provided by the host
+to optimize kernel thread scheduling.
+
+A subsystem reset puts all vCPU of the configuration into the
+horizontal polarization.
+
+Entitlement
++++++++++++
+
+The vertical polarization specifies that the guest's vCPU can get
+different real CPU provisioning:
+
+- a vCPU with vertical high entitlement specifies that this
+ vCPU gets 100% of the real CPU provisioning.
+
+- a vCPU with vertical medium entitlement specifies that this
+ vCPU shares the real CPU with other vCPUs.
+
+- a vCPU with vertical low entitlement specifies that this
+ vCPU only gets real CPU provisioning when no other vCPUs needs it.
+
+In the case a vCPU with vertical high entitlement does not use
+the real CPU, the unused "slack" can be dispatched to other vCPU
+with medium or low entitlement.
+
+A vCPU can be "dedicated" in which case the vCPU is fully dedicated to a single
+real CPU.
+
+The dedicated bit is an indication of affinity of a vCPU for a real CPU
+while the entitlement indicates the sharing or exclusivity of use.
+
+Defining the topology on the command line
+-----------------------------------------
+
+The topology can entirely be defined using -device cpu statements,
+with the exception of CPU 0 which must be defined with the -smp
+argument.
+
+For example, here we set the position of the cores 1,2,3 to
+drawer 1, book 1, socket 2 and cores 0,9 and 14 to drawer 0,
+book 0, socket 0 without defining entitlement or dedication.
+Core 4 will be set on its default position on socket 1
+(since we have 4 core per socket) and we define it as dedicated and
+with vertical high entitlement.
+
+.. code-block:: bash
+
+ $ qemu-system-s390x -m 2G \
+ -cpu gen16b,ctop=on \
+ -smp cpus=1,sockets=8,cores=4,maxcpus=32 \
+ \
+ -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=1 \
+ -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=2 \
+ -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=3 \
+ \
+ -device gen16b-s390x-cpu,drawer-id=0,book-id=0,socket-id=0,core-id=9 \
+ -device gen16b-s390x-cpu,drawer-id=0,book-id=0,socket-id=0,core-id=14 \
+ \
+ -device gen16b-s390x-cpu,core-id=4,dedicated=on,entitlement=high
+
+The entitlement defined for the CPU 4 will only be used after the guest
+successfully enables vertical polarization by using the PTF instruction.
diff --git a/docs/system/target-s390x.rst b/docs/system/target-s390x.rst
index f6f11433c7..94c981e732 100644
--- a/docs/system/target-s390x.rst
+++ b/docs/system/target-s390x.rst
@@ -34,3 +34,4 @@ Architectural features
.. toctree::
s390x/bootdevices
s390x/protvirt
+ s390x/cpu-topology
diff --git a/qapi/machine.json b/qapi/machine.json
index eb2de7acc7..beb2a815fc 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -912,6 +912,8 @@
# Which members are optional and which mandatory depends on the architecture
# and board.
#
+# For s390x see :ref:`cpu-topology-s390x`.
+#
# @node-id: NUMA node ID the CPU belongs to
#
# @drawer-id: drawer number within node/board the CPU belongs to
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 15/21] tests/avocado: s390x cpu topology core
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (13 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 14/21] docs/s390x/cpu topology: document s390x cpu topology Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-28 14:54 ` Thomas Huth
2023-09-26 12:15 ` [PATCH v24 16/21] tests/avocado: s390x cpu topology polarization Nina Schoetterl-Glausch
` (5 subsequent siblings)
20 siblings, 1 reply; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
Introduction of the s390x cpu topology core functions and
basic tests.
We test the correlation between the command line and
the QMP results in query-cpus-fast for various CPU topology.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
MAINTAINERS | 1 +
tests/avocado/s390_topology.py | 200 +++++++++++++++++++++++++++++++++
2 files changed, 201 insertions(+)
create mode 100644 tests/avocado/s390_topology.py
diff --git a/MAINTAINERS b/MAINTAINERS
index c31cec0c26..2798d02448 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1699,6 +1699,7 @@ F: hw/s390x/cpu-topology.c
F: target/s390x/kvm/stsi-topology.c
F: docs/devel/s390-cpu-topology.rst
F: docs/system/s390x/cpu-topology.rst
+F: tests/avocado/s390_topology.py
X86 Machines
------------
diff --git a/tests/avocado/s390_topology.py b/tests/avocado/s390_topology.py
new file mode 100644
index 0000000000..9078b45281
--- /dev/null
+++ b/tests/avocado/s390_topology.py
@@ -0,0 +1,200 @@
+# Functional test that boots a Linux kernel and checks the console
+#
+# Copyright IBM Corp. 2023
+#
+# Author:
+# Pierre Morel <pmorel@linux.ibm.com>
+#
+# This work is licensed under the terms of the GNU GPL, version 2 or
+# later. See the COPYING file in the top-level directory.
+
+import os
+import shutil
+import time
+
+from avocado_qemu import QemuSystemTest
+from avocado_qemu import exec_command
+from avocado_qemu import exec_command_and_wait_for_pattern
+from avocado_qemu import interrupt_interactive_console_until_pattern
+from avocado_qemu import wait_for_console_pattern
+from avocado.utils import process
+from avocado.utils import archive
+
+
+class S390CPUTopology(QemuSystemTest):
+ """
+ S390x CPU topology consists of 4 topology layers, from bottom to top,
+ the cores, sockets, books and drawers and 2 modifiers attributes,
+ the entitlement and the dedication.
+ See: docs/system/s390x/cpu-topology.rst.
+
+ S390x CPU topology is setup in different ways:
+ - implicitly from the '-smp' argument by completing each topology
+ level one after the other beginning with drawer 0, book 0 and
+ socket 0.
+ - explicitly from the '-device' argument on the QEMU command line
+ - explicitly by hotplug of a new CPU using QMP or HMP
+ - it is modified by using QMP 'set-cpu-topology'
+
+ The S390x modifier attribute entitlement depends on the machine
+ polarization, which can be horizontal or vertical.
+ The polarization is changed on a request from the guest.
+ """
+ timeout = 90
+
+ KERNEL_COMMON_COMMAND_LINE = ('printk.time=0 '
+ 'root=/dev/ram '
+ 'selinux=0 '
+ 'rdinit=/bin/sh')
+
+ def wait_until_booted(self):
+ wait_for_console_pattern(self, 'no job control',
+ failure_message='Kernel panic - not syncing',
+ vm=None)
+
+ def check_topology(self, c, s, b, d, e, t):
+ res = self.vm.qmp('query-cpus-fast')
+ cpus = res['return']
+ for cpu in cpus:
+ core = cpu['props']['core-id']
+ socket = cpu['props']['socket-id']
+ book = cpu['props']['book-id']
+ drawer = cpu['props']['drawer-id']
+ entitlement = cpu.get('entitlement')
+ dedicated = cpu.get('dedicated')
+ if core == c:
+ self.assertEqual(drawer, d)
+ self.assertEqual(book, b)
+ self.assertEqual(socket, s)
+ self.assertEqual(entitlement, e)
+ self.assertEqual(dedicated, t)
+
+ def kernel_init(self):
+ """
+ We need a VM that supports CPU topology,
+ currently this only the case when using KVM, not TCG.
+ We need a kernel supporting the CPU topology.
+ We need a minimal root filesystem with a shell.
+ """
+ self.require_accelerator("kvm")
+ kernel_url = ('https://archives.fedoraproject.org/pub/archive'
+ '/fedora-secondary/releases/35/Server/s390x/os'
+ '/images/kernel.img')
+ kernel_hash = '0d1aaaf303f07cf0160c8c48e56fe638'
+ kernel_path = self.fetch_asset(kernel_url, algorithm='md5',
+ asset_hash=kernel_hash)
+
+ initrd_url = ('https://archives.fedoraproject.org/pub/archive'
+ '/fedora-secondary/releases/35/Server/s390x/os'
+ '/images/initrd.img')
+ initrd_hash = 'a122057d95725ac030e2ec51df46e172'
+ initrd_path_xz = self.fetch_asset(initrd_url, algorithm='md5',
+ asset_hash=initrd_hash)
+ initrd_path = os.path.join(self.workdir, 'initrd-raw.img')
+ archive.lzma_uncompress(initrd_path_xz, initrd_path)
+
+ self.vm.set_console()
+ kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE
+ self.vm.add_args('-nographic',
+ '-enable-kvm',
+ '-cpu', 'max,ctop=on',
+ '-m', '512',
+ '-kernel', kernel_path,
+ '-initrd', initrd_path,
+ '-append', kernel_command_line)
+
+ def test_single(self):
+ """
+ This test checks the simplest topology with a single CPU.
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.launch()
+ self.wait_until_booted()
+ self.check_topology(0, 0, 0, 0, 'medium', False)
+
+ def test_default(self):
+ """
+ This test checks the implicit topology.
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.add_args('-smp',
+ '13,drawers=2,books=2,sockets=3,cores=2,maxcpus=24')
+ self.vm.launch()
+ self.wait_until_booted()
+ self.check_topology(0, 0, 0, 0, 'medium', False)
+ self.check_topology(1, 0, 0, 0, 'medium', False)
+ self.check_topology(2, 1, 0, 0, 'medium', False)
+ self.check_topology(3, 1, 0, 0, 'medium', False)
+ self.check_topology(4, 2, 0, 0, 'medium', False)
+ self.check_topology(5, 2, 0, 0, 'medium', False)
+ self.check_topology(6, 0, 1, 0, 'medium', False)
+ self.check_topology(7, 0, 1, 0, 'medium', False)
+ self.check_topology(8, 1, 1, 0, 'medium', False)
+ self.check_topology(9, 1, 1, 0, 'medium', False)
+ self.check_topology(10, 2, 1, 0, 'medium', False)
+ self.check_topology(11, 2, 1, 0, 'medium', False)
+ self.check_topology(12, 0, 0, 1, 'medium', False)
+
+ def test_move(self):
+ """
+ This test checks the topology modification by moving a CPU
+ to another socket: CPU 0 is moved from socket 0 to socket 2.
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.add_args('-smp',
+ '1,drawers=2,books=2,sockets=3,cores=2,maxcpus=24')
+ self.vm.launch()
+ self.wait_until_booted()
+
+ self.check_topology(0, 0, 0, 0, 'medium', False)
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'socket-id': 2, 'entitlement': 'low'})
+ self.assertEqual(res['return'], {})
+ self.check_topology(0, 2, 0, 0, 'low', False)
+
+ def test_dash_device(self):
+ """
+ This test verifies that a CPU defined with the '-device'
+ command line option finds its right place inside the topology.
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.add_args('-smp',
+ '1,drawers=2,books=2,sockets=3,cores=2,maxcpus=24')
+ self.vm.add_args('-device', 'max-s390x-cpu,core-id=10')
+ self.vm.add_args('-device',
+ 'max-s390x-cpu,'
+ 'core-id=1,socket-id=0,book-id=1,drawer-id=1,entitlement=low')
+ self.vm.add_args('-device',
+ 'max-s390x-cpu,'
+ 'core-id=2,socket-id=0,book-id=1,drawer-id=1,entitlement=medium')
+ self.vm.add_args('-device',
+ 'max-s390x-cpu,'
+ 'core-id=3,socket-id=1,book-id=1,drawer-id=1,entitlement=high')
+ self.vm.add_args('-device',
+ 'max-s390x-cpu,'
+ 'core-id=4,socket-id=1,book-id=1,drawer-id=1')
+ self.vm.add_args('-device',
+ 'max-s390x-cpu,'
+ 'core-id=5,socket-id=2,book-id=1,drawer-id=1,dedicated=true')
+
+ self.vm.launch()
+ self.wait_until_booted()
+
+ self.check_topology(10, 2, 1, 0, 'medium', False)
+ self.check_topology(1, 0, 1, 1, 'low', False)
+ self.check_topology(2, 0, 1, 1, 'medium', False)
+ self.check_topology(3, 1, 1, 1, 'high', False)
+ self.check_topology(4, 1, 1, 1, 'medium', False)
+ self.check_topology(5, 2, 1, 1, 'high', True)
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 16/21] tests/avocado: s390x cpu topology polarization
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (14 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 15/21] tests/avocado: s390x cpu topology core Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 17/21] tests/avocado: s390x cpu topology entitlement tests Nina Schoetterl-Glausch
` (4 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
Polarization is changed on a request from the guest.
Let's verify the polarization is accordingly set by QEMU.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
tests/avocado/s390_topology.py | 45 ++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/tests/avocado/s390_topology.py b/tests/avocado/s390_topology.py
index 9078b45281..8166cee134 100644
--- a/tests/avocado/s390_topology.py
+++ b/tests/avocado/s390_topology.py
@@ -41,6 +41,7 @@ class S390CPUTopology(QemuSystemTest):
The polarization is changed on a request from the guest.
"""
timeout = 90
+ event_timeout = 10
KERNEL_COMMON_COMMAND_LINE = ('printk.time=0 '
'root=/dev/ram '
@@ -103,6 +104,14 @@ def kernel_init(self):
'-initrd', initrd_path,
'-append', kernel_command_line)
+ def system_init(self):
+ self.log.info("System init")
+ exec_command_and_wait_for_pattern(self,
+ """ mount proc -t proc /proc;
+ mount sys -t sysfs /sys;
+ cat /sys/devices/system/cpu/dispatching """,
+ '0')
+
def test_single(self):
"""
This test checks the simplest topology with a single CPU.
@@ -198,3 +207,39 @@ def test_dash_device(self):
self.check_topology(3, 1, 1, 1, 'high', False)
self.check_topology(4, 1, 1, 1, 'medium', False)
self.check_topology(5, 2, 1, 1, 'high', True)
+
+
+ def guest_set_dispatching(self, dispatching):
+ exec_command(self,
+ f'echo {dispatching} > /sys/devices/system/cpu/dispatching')
+ self.vm.event_wait('CPU_POLARIZATION_CHANGE', self.event_timeout)
+ exec_command_and_wait_for_pattern(self,
+ 'cat /sys/devices/system/cpu/dispatching', dispatching)
+
+
+ def test_polarization(self):
+ """
+ This test verifies that QEMU modifies the entitlement change after
+ several guest polarization change requests.
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.launch()
+ self.wait_until_booted()
+
+ self.system_init()
+ res = self.vm.qmp('query-s390x-cpu-polarization')
+ self.assertEqual(res['return']['polarization'], 'horizontal')
+ self.check_topology(0, 0, 0, 0, 'medium', False)
+
+ self.guest_set_dispatching('1');
+ res = self.vm.qmp('query-s390x-cpu-polarization')
+ self.assertEqual(res['return']['polarization'], 'vertical')
+ self.check_topology(0, 0, 0, 0, 'medium', False)
+
+ self.guest_set_dispatching('0');
+ res = self.vm.qmp('query-s390x-cpu-polarization')
+ self.assertEqual(res['return']['polarization'], 'horizontal')
+ self.check_topology(0, 0, 0, 0, 'medium', False)
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 17/21] tests/avocado: s390x cpu topology entitlement tests
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (15 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 16/21] tests/avocado: s390x cpu topology polarization Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-28 14:55 ` Thomas Huth
2023-09-26 12:15 ` [PATCH v24 18/21] tests/avocado: s390x cpu topology test dedicated CPU Nina Schoetterl-Glausch
` (3 subsequent siblings)
20 siblings, 1 reply; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
Test changes in the entitlement from both a guest and a host point of
view, depending on the polarization.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
tests/avocado/s390_topology.py | 62 ++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/tests/avocado/s390_topology.py b/tests/avocado/s390_topology.py
index 8166cee134..24fac9a54d 100644
--- a/tests/avocado/s390_topology.py
+++ b/tests/avocado/s390_topology.py
@@ -243,3 +243,65 @@ def test_polarization(self):
res = self.vm.qmp('query-s390x-cpu-polarization')
self.assertEqual(res['return']['polarization'], 'horizontal')
self.check_topology(0, 0, 0, 0, 'medium', False)
+
+
+ def check_polarization(self, polarization):
+ #We need to wait for the change to have been propagated to the kernel
+ exec_command_and_wait_for_pattern(self,
+ "\n".join([
+ "timeout 1 sh -c 'while true",
+ 'do',
+ ' syspath="/sys/devices/system/cpu/cpu0/polarization"',
+ ' polarization="$(cat "$syspath")" || exit',
+ f' if [ "$polarization" = "{polarization}" ]; then',
+ ' exit 0',
+ ' fi',
+ ' sleep 0.01',
+ #searched for strings mustn't show up in command, '' to obfuscate
+ "done' && echo succ''ess || echo fail''ure",
+ ]),
+ "success", "failure")
+
+
+ def test_entitlement(self):
+ """
+ This test verifies that QEMU modifies the entitlement
+ after a guest request and that the guest sees the change.
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.launch()
+ self.wait_until_booted()
+
+ self.system_init()
+
+ self.check_polarization('horizontal')
+ self.check_topology(0, 0, 0, 0, 'medium', False)
+
+ self.guest_set_dispatching('1')
+ self.check_polarization('vertical:medium')
+ self.check_topology(0, 0, 0, 0, 'medium', False)
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'entitlement': 'low'})
+ self.assertEqual(res['return'], {})
+ self.check_polarization('vertical:low')
+ self.check_topology(0, 0, 0, 0, 'low', False)
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'entitlement': 'medium'})
+ self.assertEqual(res['return'], {})
+ self.check_polarization('vertical:medium')
+ self.check_topology(0, 0, 0, 0, 'medium', False)
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'entitlement': 'high'})
+ self.assertEqual(res['return'], {})
+ self.check_polarization('vertical:high')
+ self.check_topology(0, 0, 0, 0, 'high', False)
+
+ self.guest_set_dispatching('0');
+ self.check_polarization("horizontal")
+ self.check_topology(0, 0, 0, 0, 'high', False)
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 18/21] tests/avocado: s390x cpu topology test dedicated CPU
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (16 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 17/21] tests/avocado: s390x cpu topology entitlement tests Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 19/21] tests/avocado: s390x cpu topology test socket full Nina Schoetterl-Glausch
` (2 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
A dedicated CPU in vertical polarization can only have
a high entitlement.
Let's check this from both host and guest point of view.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
---
tests/avocado/s390_topology.py | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/tests/avocado/s390_topology.py b/tests/avocado/s390_topology.py
index 24fac9a54d..3661048f4c 100644
--- a/tests/avocado/s390_topology.py
+++ b/tests/avocado/s390_topology.py
@@ -305,3 +305,36 @@ def test_entitlement(self):
self.guest_set_dispatching('0');
self.check_polarization("horizontal")
self.check_topology(0, 0, 0, 0, 'high', False)
+
+
+ def test_dedicated(self):
+ """
+ This test verifies that QEMU adjusts the entitlement correctly when a
+ CPU is made dedicated.
+ QEMU retains the entitlement value when horizontal polarization is in effect.
+ For the guest, the field shows the effective value of the entitlement.
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.launch()
+ self.wait_until_booted()
+
+ self.system_init()
+
+ self.check_polarization("horizontal")
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'dedicated': True})
+ self.assertEqual(res['return'], {})
+ self.check_topology(0, 0, 0, 0, 'high', True)
+ self.check_polarization("horizontal")
+
+ self.guest_set_dispatching('1');
+ self.check_topology(0, 0, 0, 0, 'high', True)
+ self.check_polarization("vertical:high")
+
+ self.guest_set_dispatching('0');
+ self.check_topology(0, 0, 0, 0, 'high', True)
+ self.check_polarization("horizontal")
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 19/21] tests/avocado: s390x cpu topology test socket full
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (17 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 18/21] tests/avocado: s390x cpu topology test dedicated CPU Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 20/21] tests/avocado: s390x cpu topology dedicated errors Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 21/21] tests/avocado: s390x cpu topology bad move Nina Schoetterl-Glausch
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
This test verifies that QMP set-cpu-topology does not accept
to overload a socket.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
tests/avocado/s390_topology.py | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/tests/avocado/s390_topology.py b/tests/avocado/s390_topology.py
index 3661048f4c..a63c2b2923 100644
--- a/tests/avocado/s390_topology.py
+++ b/tests/avocado/s390_topology.py
@@ -338,3 +338,29 @@ def test_dedicated(self):
self.guest_set_dispatching('0');
self.check_topology(0, 0, 0, 0, 'high', True)
self.check_polarization("horizontal")
+
+
+ def test_socket_full(self):
+ """
+ This test verifies that QEMU does not accept to overload a socket.
+ The socket-id 0 on book-id 0 already contains CPUs 0 and 1 and can
+ not accept any new CPU while socket-id 0 on book-id 1 is free.
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.add_args('-smp',
+ '3,drawers=2,books=2,sockets=3,cores=2,maxcpus=24')
+ self.vm.launch()
+ self.wait_until_booted()
+
+ self.system_init()
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 2, 'socket-id': 0, 'book-id': 0})
+ self.assertEqual(res['error']['class'], 'GenericError')
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 2, 'socket-id': 0, 'book-id': 1})
+ self.assertEqual(res['return'], {})
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 20/21] tests/avocado: s390x cpu topology dedicated errors
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (18 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 19/21] tests/avocado: s390x cpu topology test socket full Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 21/21] tests/avocado: s390x cpu topology bad move Nina Schoetterl-Glausch
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
Let's test that QEMU refuses to setup a dedicated CPU with
low or medium entitlement.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
tests/avocado/s390_topology.py | 48 ++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/tests/avocado/s390_topology.py b/tests/avocado/s390_topology.py
index a63c2b2923..d3e6556c0f 100644
--- a/tests/avocado/s390_topology.py
+++ b/tests/avocado/s390_topology.py
@@ -364,3 +364,51 @@ def test_socket_full(self):
res = self.vm.qmp('set-cpu-topology',
{'core-id': 2, 'socket-id': 0, 'book-id': 1})
self.assertEqual(res['return'], {})
+
+ def test_dedicated_error(self):
+ """
+ This test verifies that QEMU refuses to lower the entitlement
+ of a dedicated CPU
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.launch()
+ self.wait_until_booted()
+
+ self.system_init()
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'dedicated': True})
+ self.assertEqual(res['return'], {})
+
+ self.check_topology(0, 0, 0, 0, 'high', True)
+
+ self.guest_set_dispatching('1');
+
+ self.check_topology(0, 0, 0, 0, 'high', True)
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'entitlement': 'low', 'dedicated': True})
+ self.assertEqual(res['error']['class'], 'GenericError')
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'entitlement': 'low'})
+ self.assertEqual(res['error']['class'], 'GenericError')
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'entitlement': 'medium', 'dedicated': True})
+ self.assertEqual(res['error']['class'], 'GenericError')
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'entitlement': 'medium'})
+ self.assertEqual(res['error']['class'], 'GenericError')
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'entitlement': 'low', 'dedicated': False})
+ self.assertEqual(res['return'], {})
+
+ res = self.vm.qmp('set-cpu-topology',
+ {'core-id': 0, 'entitlement': 'medium', 'dedicated': False})
+ self.assertEqual(res['return'], {})
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v24 21/21] tests/avocado: s390x cpu topology bad move
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
` (19 preceding siblings ...)
2023-09-26 12:15 ` [PATCH v24 20/21] tests/avocado: s390x cpu topology dedicated errors Nina Schoetterl-Glausch
@ 2023-09-26 12:15 ` Nina Schoetterl-Glausch
20 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-09-26 12:15 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, Nina Schoetterl-Glausch
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
From: Pierre Morel <pmorel@linux.ibm.com>
This test verifies that QEMU refuses to move a CPU to an
nonexistent location.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
tests/avocado/s390_topology.py | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/tests/avocado/s390_topology.py b/tests/avocado/s390_topology.py
index d3e6556c0f..9154ac8776 100644
--- a/tests/avocado/s390_topology.py
+++ b/tests/avocado/s390_topology.py
@@ -412,3 +412,28 @@ def test_dedicated_error(self):
res = self.vm.qmp('set-cpu-topology',
{'core-id': 0, 'entitlement': 'medium', 'dedicated': False})
self.assertEqual(res['return'], {})
+
+ def test_move_error(self):
+ """
+ This test verifies that QEMU refuses to move a CPU to an
+ nonexistent location
+
+ :avocado: tags=arch:s390x
+ :avocado: tags=machine:s390-ccw-virtio
+ """
+ self.kernel_init()
+ self.vm.launch()
+ self.wait_until_booted()
+
+ self.system_init()
+
+ res = self.vm.qmp('set-cpu-topology', {'core-id': 0, 'drawer-id': 1})
+ self.assertEqual(res['error']['class'], 'GenericError')
+
+ res = self.vm.qmp('set-cpu-topology', {'core-id': 0, 'book-id': 1})
+ self.assertEqual(res['error']['class'], 'GenericError')
+
+ res = self.vm.qmp('set-cpu-topology', {'core-id': 0, 'socket-id': 1})
+ self.assertEqual(res['error']['class'], 'GenericError')
+
+ self.check_topology(0, 0, 0, 0, 'medium', False)
--
2.39.2
^ permalink raw reply related [flat|nested] 31+ messages in thread
* Re: [PATCH v24 02/21] CPU topology: extend with s390 specifics
2023-09-26 12:15 ` [PATCH v24 02/21] CPU topology: extend with s390 specifics Nina Schoetterl-Glausch
@ 2023-09-28 11:31 ` Thomas Huth
2023-10-04 16:39 ` Nina Schoetterl-Glausch
1 sibling, 0 replies; 31+ messages in thread
From: Thomas Huth @ 2023-09-28 11:31 UTC (permalink / raw)
To: Nina Schoetterl-Glausch, qemu-devel, qemu-s390x, Eduardo Habkost,
Marcel Apfelbaum, Paolo Bonzini, Richard Henderson,
David Hildenbrand, Halil Pasic, Christian Borntraeger,
Eric Farman, Eric Blake, Markus Armbruster, Michael Roth
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
On 26/09/2023 14.15, Nina Schoetterl-Glausch wrote:
> From: Pierre Morel <pmorel@linux.ibm.com>
>
> S390 adds two new SMP levels, drawers and books to the CPU
> topology.
> S390 CPUs have specific topology features like dedication and
> entitlement. These indicate to the guest information on host
> vCPU scheduling and help the guest make better scheduling decisions.
>
> Let us provide the SMP properties with books and drawers levels
> and S390 CPU with dedication and entitlement,
>
> Add machine-common.json so we can later include it in
> machine-target.json also.
>
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> ---
> qapi/machine-common.json | 21 +++++++++++++
> qapi/machine.json | 17 +++++++++-
> qapi/qapi-schema.json | 1 +
> include/hw/boards.h | 10 +++++-
> include/hw/qdev-properties-system.h | 4 +++
> target/s390x/cpu.h | 6 ++++
> hw/core/machine-smp.c | 48 ++++++++++++++++++++++++-----
> hw/core/machine.c | 4 +++
> hw/core/qdev-properties-system.c | 13 ++++++++
> hw/s390x/s390-virtio-ccw.c | 4 +++
> softmmu/vl.c | 6 ++++
> target/s390x/cpu.c | 7 +++++
> qapi/meson.build | 1 +
> qemu-options.hx | 7 +++--
> 14 files changed, 138 insertions(+), 11 deletions(-)
> create mode 100644 qapi/machine-common.json
Reviewed-by: Thomas Huth <thuth@redhat.com>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v24 04/21] target/s390x/cpu topology: handle STSI(15) and build the SYSIB
2023-09-26 12:15 ` [PATCH v24 04/21] target/s390x/cpu topology: handle STSI(15) and build the SYSIB Nina Schoetterl-Glausch
@ 2023-09-28 13:05 ` Thomas Huth
0 siblings, 0 replies; 31+ messages in thread
From: Thomas Huth @ 2023-09-28 13:05 UTC (permalink / raw)
To: Nina Schoetterl-Glausch, qemu-devel, qemu-s390x, Eduardo Habkost,
Marcel Apfelbaum, Paolo Bonzini, Richard Henderson,
David Hildenbrand, Halil Pasic, Christian Borntraeger,
Eric Farman, Eric Blake, Markus Armbruster, Michael Roth
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
On 26/09/2023 14.15, Nina Schoetterl-Glausch wrote:
> From: Pierre Morel <pmorel@linux.ibm.com>
>
> On interception of STSI(15.1.x) the System Information Block
> (SYSIB) is built from the list of pre-ordered topology entries.
>
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> ---
...
> diff --git a/include/hw/s390x/cpu-topology.h b/include/hw/s390x/cpu-topology.h
> index 97b0af2795..350c7ea8aa 100644
> --- a/include/hw/s390x/cpu-topology.h
> +++ b/include/hw/s390x/cpu-topology.h
> @@ -15,10 +15,33 @@
> #include "hw/boards.h"
> #include "qapi/qapi-types-machine-target.h"
>
> +#define S390_TOPOLOGY_CPU_IFL 0x03
> +
> +typedef struct s390_topology_id {
> + uint8_t sentinel;
> + uint8_t drawer;
> + uint8_t book;
> + uint8_t socket;
> + uint8_t type;
> + uint8_t vertical:1;
> + uint8_t entitlement:2;
> + uint8_t dedicated;
> + uint8_t origin;
> +} s390_topology_id;
Sorry for not noticing this earlier, but: Please adapt the name of the
struct to the QEMU coding conventions, i.e. S390TopologyId instead of
s390_topology_id.
...
> diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
> index dfcc1aa1fc..c1ba5c46d6 100644
> --- a/target/s390x/cpu.h
> +++ b/target/s390x/cpu.h
> @@ -571,6 +571,29 @@ typedef struct SysIB_322 {
...
> +/*
> + * CPU Topology List provided by STSI with fc=15 provides a list
> + * of two different Topology List Entries (TLE) types to specify
> + * the topology hierarchy.
> + *
> + * - Container Topology List Entry
> + * Defines a container to contain other Topology List Entries
> + * of any type, nested containers or CPU.
> + * - CPU Topology List Entry
> + * Specifies the CPUs position, type, entitlement and polarization
> + * of the CPUs contained in the last Container TLE.
Please write Container with a small "c" at the beginning.
...
> diff --git a/target/s390x/kvm/stsi-topology.c b/target/s390x/kvm/stsi-topology.c
> new file mode 100644
> index 0000000000..67ecc67184
> --- /dev/null
> +++ b/target/s390x/kvm/stsi-topology.c
> @@ -0,0 +1,339 @@
...
> +/**
> + * s390_topology_fill_list_sorted:
> + * @topology_list: list to fill
> + *
> + * Loop over all CPU and insert it at the right place
I'd like to suggest to change that to:
"Loop over all CPUs and insert each of the at the right place"
> + * inside the TLE entry list.
> + * Fill the S390Topology list with entries according to the order
> + * specified by the PoP.
> + */
> +static void s390_topology_fill_list_sorted(S390TopologyList *topology_list)
> +{
> + CPUState *cs;
> + S390TopologyEntry sentinel = { .id.sentinel = 1 };
> +
> + QTAILQ_INIT(topology_list);
> +
> + QTAILQ_INSERT_HEAD(topology_list, &sentinel, next);
> +
> + CPU_FOREACH(cs) {
> + s390_topology_id id = s390_topology_from_cpu(S390_CPU(cs));
> + S390TopologyEntry *entry = NULL, *tmp;
> +
> + QTAILQ_FOREACH(tmp, topology_list, next) {
> + if (s390_topology_id_eq(&id, &tmp->id)) {
> + entry = tmp;
> + break;
> + } else if (s390_topology_id_lt(&id, &tmp->id)) {
> + entry = g_malloc0(sizeof(*entry));
> + entry->id = id;
> + QTAILQ_INSERT_BEFORE(tmp, entry, next);
> + break;
> + }
> + }
> + assert(entry);
> + s390_topology_add_cpu_to_entry(entry, S390_CPU(cs));
> + }
> +
> + QTAILQ_REMOVE(topology_list, &sentinel, next);
> +}
> +
> +/**
> + * s390_topology_empty_list:
> + *
> + * Clear all entries in the S390Topology list.
> + */
> +static void s390_topology_empty_list(S390TopologyList *topology_list)
> +{
> + S390TopologyEntry *entry = NULL;
> + S390TopologyEntry *tmp = NULL;
> +
> + QTAILQ_FOREACH_SAFE(entry, topology_list, next, tmp) {
> + QTAILQ_REMOVE(topology_list, entry, next);
> + g_free(entry);
> + }
> +}
> +
> +/**
> + * insert_stsi_15_1_x:
> + * @cpu: the CPU doing the call for which we set CC
> + * @sel2: the selector 2, containing the nested level
> + * @addr: Guest logical address of the guest SysIB
> + * @ar: the access register number
> + * @ra: the return address
> + *
> + * Emulate STSI 15.1.x, that is, perform all necessary checks and
> + * fill the SYSIB.
> + * In case the topology description is too long to fit into the SYSIB,
> + * set CC=3 and abort without writing the SYSIB.
> + */
> +void insert_stsi_15_1_x(S390CPU *cpu, int sel2, uint64_t addr, uint8_t ar, uintptr_t ra)
> +{
> + S390TopologyList topology_list;
> + SysIB sysib = {0};
> + int length;
> +
> + if (!s390_has_topology() || sel2 < 2 || sel2 > SCLP_READ_SCP_INFO_MNEST) {
> + setcc(cpu, 3);
> + return;
> + }
> +
> + s390_topology_fill_list_sorted(&topology_list);
> +
> + length = setup_stsi(&topology_list, &sysib.sysib_151x, sel2);
> +
> + if (!length) {
> + s390_topology_empty_list(&topology_list);
> + setcc(cpu, 3);
> + return;
> + }
> +
> + sysib.sysib_151x.length = cpu_to_be16(length);
> + if (!s390_cpu_virt_mem_write(cpu, addr, ar, &sysib, length)) {
> + setcc(cpu, 0);
> + } else {
> + s390_cpu_virt_mem_handle_exc(cpu, ra);
> + }
> +
> + s390_topology_empty_list(&topology_list);
In case this will ever be used with TCG: s390_cpu_virt_mem_handle_exc()
might not return, so the clean-up has to be done before calling that function:
ret = s390_cpu_virt_mem_write(cpu, addr, ar, &sysib, length);
s390_topology_empty_list(&topology_list);
if (!ret) {
setcc(cpu, 0);
} else {
s390_cpu_virt_mem_handle_exc(cpu, ra);
}
}
Or maybe even do it before the "if (!length)" statement, so you don't need
it in the body of that statement?
Thomas
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v24 09/21] qapi/s390x/cpu topology: set-cpu-topology qmp command
2023-09-26 12:15 ` [PATCH v24 09/21] qapi/s390x/cpu topology: set-cpu-topology qmp command Nina Schoetterl-Glausch
@ 2023-09-28 13:29 ` Thomas Huth
0 siblings, 0 replies; 31+ messages in thread
From: Thomas Huth @ 2023-09-28 13:29 UTC (permalink / raw)
To: Nina Schoetterl-Glausch, qemu-devel, qemu-s390x, Eduardo Habkost,
Marcel Apfelbaum, Paolo Bonzini, Richard Henderson,
David Hildenbrand, Halil Pasic, Christian Borntraeger,
Eric Farman, Eric Blake, Markus Armbruster, Michael Roth
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
On 26/09/2023 14.15, Nina Schoetterl-Glausch wrote:
> From: Pierre Morel <pmorel@linux.ibm.com>
>
> The modification of the CPU attributes are done through a monitor
> command.
>
> It allows to move the core inside the topology tree to optimize
> the cache usage in the case the host's hypervisor previously
> moved the CPU.
>
> The same command allows to modify the CPU attributes modifiers
> like polarization entitlement and the dedicated attribute to notify
> the guest if the host admin modified scheduling or dedication of a vCPU.
>
> With this knowledge the guest has the possibility to optimize the
> usage of the vCPUs.
>
> The command has a feature unstable for the moment.
>
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> ---
...
> +
> +void qmp_set_cpu_topology(uint16_t core,
> + bool has_socket, uint16_t socket,
> + bool has_book, uint16_t book,
> + bool has_drawer, uint16_t drawer,
> + bool has_entitlement, CpuS390Entitlement entitlement,
> + bool has_dedicated, bool dedicated,
> + Error **errp)
Nit: Indentation seems to be off by 1 space in the above lines.
Thomas
> +{
> + if (!s390_has_topology()) {
> + error_setg(errp, "This machine doesn't support topology");
> + return;
> + }
> +
> + s390_change_topology(core, has_socket, socket, has_book, book,
> + has_drawer, drawer, has_entitlement, entitlement,
> + has_dedicated, dedicated, errp);
> +}
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v24 15/21] tests/avocado: s390x cpu topology core
2023-09-26 12:15 ` [PATCH v24 15/21] tests/avocado: s390x cpu topology core Nina Schoetterl-Glausch
@ 2023-09-28 14:54 ` Thomas Huth
0 siblings, 0 replies; 31+ messages in thread
From: Thomas Huth @ 2023-09-28 14:54 UTC (permalink / raw)
To: Nina Schoetterl-Glausch, qemu-devel, qemu-s390x, Eduardo Habkost,
Marcel Apfelbaum, Paolo Bonzini, Richard Henderson,
David Hildenbrand, Halil Pasic, Christian Borntraeger,
Eric Farman, Eric Blake, Markus Armbruster, Michael Roth
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
On 26/09/2023 14.15, Nina Schoetterl-Glausch wrote:
> From: Pierre Morel <pmorel@linux.ibm.com>
>
> Introduction of the s390x cpu topology core functions and
> basic tests.
>
> We test the correlation between the command line and
> the QMP results in query-cpus-fast for various CPU topology.
>
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> ---
> MAINTAINERS | 1 +
> tests/avocado/s390_topology.py | 200 +++++++++++++++++++++++++++++++++
> 2 files changed, 201 insertions(+)
> create mode 100644 tests/avocado/s390_topology.py
Tested-by: Thomas Huth <thuth@redhat.com>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v24 17/21] tests/avocado: s390x cpu topology entitlement tests
2023-09-26 12:15 ` [PATCH v24 17/21] tests/avocado: s390x cpu topology entitlement tests Nina Schoetterl-Glausch
@ 2023-09-28 14:55 ` Thomas Huth
0 siblings, 0 replies; 31+ messages in thread
From: Thomas Huth @ 2023-09-28 14:55 UTC (permalink / raw)
To: Nina Schoetterl-Glausch, qemu-devel, qemu-s390x, Eduardo Habkost,
Marcel Apfelbaum, Paolo Bonzini, Richard Henderson,
David Hildenbrand, Halil Pasic, Christian Borntraeger,
Eric Farman, Eric Blake, Markus Armbruster, Michael Roth
Cc: Philippe Mathieu-Daudé, Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
On 26/09/2023 14.15, Nina Schoetterl-Glausch wrote:
> From: Pierre Morel <pmorel@linux.ibm.com>
>
> Test changes in the entitlement from both a guest and a host point of
> view, depending on the polarization.
>
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> ---
> tests/avocado/s390_topology.py | 62 ++++++++++++++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
Tested-by: Thomas Huth <thuth@redhat.com>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v24 02/21] CPU topology: extend with s390 specifics
2023-09-26 12:15 ` [PATCH v24 02/21] CPU topology: extend with s390 specifics Nina Schoetterl-Glausch
2023-09-28 11:31 ` Thomas Huth
@ 2023-10-04 16:39 ` Nina Schoetterl-Glausch
2023-10-04 17:32 ` Thomas Huth
1 sibling, 1 reply; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-10-04 16:39 UTC (permalink / raw)
To: Eduardo Habkost, Marcel Apfelbaum
Cc: Philippe Mathieu-Daudé,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Markus Armbruster, Michael Roth, qemu-s390x, qemu-devel,
Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
On Tue, 2023-09-26 at 14:15 +0200, Nina Schoetterl-Glausch wrote:
> From: Pierre Morel <pmorel@linux.ibm.com>
>
> S390 adds two new SMP levels, drawers and books to the CPU
> topology.
> S390 CPUs have specific topology features like dedication and
> entitlement. These indicate to the guest information on host
> vCPU scheduling and help the guest make better scheduling decisions.
>
> Let us provide the SMP properties with books and drawers levels
> and S390 CPU with dedication and entitlement,
>
> Add machine-common.json so we can later include it in
> machine-target.json also.
>
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> ---
> qapi/machine-common.json | 21 +++++++++++++
I guess I should also add this new file to MAINTAINERS under Machine core, right?
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v24 02/21] CPU topology: extend with s390 specifics
2023-10-04 16:39 ` Nina Schoetterl-Glausch
@ 2023-10-04 17:32 ` Thomas Huth
0 siblings, 0 replies; 31+ messages in thread
From: Thomas Huth @ 2023-10-04 17:32 UTC (permalink / raw)
To: Nina Schoetterl-Glausch, Eduardo Habkost, Marcel Apfelbaum
Cc: Philippe Mathieu-Daudé,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Eric Blake,
Markus Armbruster, Michael Roth, qemu-s390x, qemu-devel,
Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal, Pierre Morel
On 04/10/2023 18.39, Nina Schoetterl-Glausch wrote:
> On Tue, 2023-09-26 at 14:15 +0200, Nina Schoetterl-Glausch wrote:
>> From: Pierre Morel <pmorel@linux.ibm.com>
>>
>> S390 adds two new SMP levels, drawers and books to the CPU
>> topology.
>> S390 CPUs have specific topology features like dedication and
>> entitlement. These indicate to the guest information on host
>> vCPU scheduling and help the guest make better scheduling decisions.
>>
>> Let us provide the SMP properties with books and drawers levels
>> and S390 CPU with dedication and entitlement,
>>
>> Add machine-common.json so we can later include it in
>> machine-target.json also.
>>
>> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
>> Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
>> Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
>> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
>> ---
>> qapi/machine-common.json | 21 +++++++++++++
>
> I guess I should also add this new file to MAINTAINERS under Machine core, right?
Yes, please!
Thomas
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v24 01/21] qapi: machine.json: change docs regarding CpuInstanceProperties
2023-09-26 12:15 ` [PATCH v24 01/21] qapi: machine.json: change docs regarding CpuInstanceProperties Nina Schoetterl-Glausch
@ 2023-10-12 5:59 ` Markus Armbruster
2023-10-13 11:46 ` Nina Schoetterl-Glausch
0 siblings, 1 reply; 31+ messages in thread
From: Markus Armbruster @ 2023-10-12 5:59 UTC (permalink / raw)
To: Nina Schoetterl-Glausch
Cc: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Michael Roth, Philippe Mathieu-Daudé,
Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal
Nina Schoetterl-Glausch <nsg@linux.ibm.com> writes:
> Clarify roles of different architectures.
> Also change things a bit in anticipation of additional members being
> added.
>
> Suggested-by: Markus Armbruster <armbru@redhat.com>
> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> ---
>
>
> Reference to s390x docs added in patch 14
>
>
> qapi/machine.json | 17 +++++++++--------
> 1 file changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/qapi/machine.json b/qapi/machine.json
> index a08b6576ca..3c074c9902 100644
> --- a/qapi/machine.json
> +++ b/qapi/machine.json
> @@ -70,9 +70,9 @@
> # @qom-path: path to the CPU object in the QOM tree
> #
> # @thread-id: ID of the underlying host thread
> -#
> -# @props: properties describing to which node/socket/core/thread
> -# virtual CPU belongs to, provided if supported by board
> +
Keep the '#', please.
> +# @props: properties of type CpuInstanceProperties associated with a
> +# virtual CPU, e.g. the socket id
> #
> # @target: the QEMU system emulation target, which determines which
> # additional fields will be listed (since 3.0)
> @@ -899,6 +899,9 @@
> # should be passed by management with device_add command when a CPU is
> # being hotplugged.
> #
> +# Which members are optional and which mandatory depends on the architecture
> +# and board.
Long line. Wrap like this:
# Which members are optional and which mandatory depends on the
# architecture and board.
Would "depends on the machine type" be more precise?
> +#
> # @node-id: NUMA node ID the CPU belongs to
> #
> # @socket-id: socket number within node/board the CPU belongs to
> @@ -912,15 +915,13 @@
> #
> # @thread-id: thread number within core the CPU belongs to
> #
> -# Note: currently there are 6 properties that could be present but
> -# management should be prepared to pass through other properties
> -# with device_add command to allow for future interface extension.
> -# This also requires the filed names to be kept in sync with the
> -# properties passed to -device/device_add.
> +# Note: management should be prepared to pass through additional
> +# properties with device_add.
Indent the second line for consistency with other Note: sections:
# Note: management should be prepared to pass through additional
# properties with device_add.
> #
> # Since: 2.7
> ##
> { 'struct': 'CpuInstanceProperties',
> + # Keep these in sync with the properties device_add accepts
> 'data': { '*node-id': 'int',
> '*socket-id': 'int',
> '*die-id': 'int',
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v24 01/21] qapi: machine.json: change docs regarding CpuInstanceProperties
2023-10-12 5:59 ` Markus Armbruster
@ 2023-10-13 11:46 ` Nina Schoetterl-Glausch
0 siblings, 0 replies; 31+ messages in thread
From: Nina Schoetterl-Glausch @ 2023-10-13 11:46 UTC (permalink / raw)
To: Markus Armbruster
Cc: qemu-devel, qemu-s390x, Eduardo Habkost, Marcel Apfelbaum,
Paolo Bonzini, Richard Henderson, David Hildenbrand, Halil Pasic,
Christian Borntraeger, Eric Farman, Thomas Huth, Eric Blake,
Michael Roth, Philippe Mathieu-Daudé,
Yanan Wang, Daniel P. Berrangé,
Ilya Leoshkevich, Cleber Rosa, Wainer dos Santos Moschetta,
Beraldo Leal
On Thu, 2023-10-12 at 07:59 +0200, Markus Armbruster wrote:
> Nina Schoetterl-Glausch <nsg@linux.ibm.com> writes:
>
> > Clarify roles of different architectures.
> > Also change things a bit in anticipation of additional members being
> > added.
> >
> > Suggested-by: Markus Armbruster <armbru@redhat.com>
> > Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
> > ---
> >
> >
> > Reference to s390x docs added in patch 14
> >
> >
> > qapi/machine.json | 17 +++++++++--------
> > 1 file changed, 9 insertions(+), 8 deletions(-)
> >
> > diff --git a/qapi/machine.json b/qapi/machine.json
> > index a08b6576ca..3c074c9902 100644
> > --- a/qapi/machine.json
> > +++ b/qapi/machine.json
> > @@ -70,9 +70,9 @@
> > # @qom-path: path to the CPU object in the QOM tree
> > #
> > # @thread-id: ID of the underlying host thread
> > -#
> > -# @props: properties describing to which node/socket/core/thread
> > -# virtual CPU belongs to, provided if supported by board
> > +
>
> Keep the '#', please.
>
> > +# @props: properties of type CpuInstanceProperties associated with a
> > +# virtual CPU, e.g. the socket id
> > #
> > # @target: the QEMU system emulation target, which determines which
> > # additional fields will be listed (since 3.0)
> > @@ -899,6 +899,9 @@
> > # should be passed by management with device_add command when a CPU is
> > # being hotplugged.
> > #
> > +# Which members are optional and which mandatory depends on the architecture
> > +# and board.
>
> Long line. Wrap like this:
>
> # Which members are optional and which mandatory depends on the
> # architecture and board.
>
> Would "depends on the machine type" be more precise?
Depends on the definition of "machine type" I guess.
"architecture and board" seems more descriptive to me.
>
> > +#
> > # @node-id: NUMA node ID the CPU belongs to
> > #
> > # @socket-id: socket number within node/board the CPU belongs to
> > @@ -912,15 +915,13 @@
> > #
> > # @thread-id: thread number within core the CPU belongs to
> > #
> > -# Note: currently there are 6 properties that could be present but
> > -# management should be prepared to pass through other properties
> > -# with device_add command to allow for future interface extension.
> > -# This also requires the filed names to be kept in sync with the
> > -# properties passed to -device/device_add.
> > +# Note: management should be prepared to pass through additional
> > +# properties with device_add.
>
> Indent the second line for consistency with other Note: sections:
>
> # Note: management should be prepared to pass through additional
> # properties with device_add.
>
> > #
> > # Since: 2.7
> > ##
> > { 'struct': 'CpuInstanceProperties',
> > + # Keep these in sync with the properties device_add accepts
> > 'data': { '*node-id': 'int',
> > '*socket-id': 'int',
> > '*die-id': 'int',
>
^ permalink raw reply [flat|nested] 31+ messages in thread
end of thread, other threads:[~2023-10-13 11:47 UTC | newest]
Thread overview: 31+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-09-26 12:15 [PATCH v24 00/21] s390x: CPU Topology Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 01/21] qapi: machine.json: change docs regarding CpuInstanceProperties Nina Schoetterl-Glausch
2023-10-12 5:59 ` Markus Armbruster
2023-10-13 11:46 ` Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 02/21] CPU topology: extend with s390 specifics Nina Schoetterl-Glausch
2023-09-28 11:31 ` Thomas Huth
2023-10-04 16:39 ` Nina Schoetterl-Glausch
2023-10-04 17:32 ` Thomas Huth
2023-09-26 12:15 ` [PATCH v24 03/21] s390x/cpu topology: add topology entries on CPU hotplug Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 04/21] target/s390x/cpu topology: handle STSI(15) and build the SYSIB Nina Schoetterl-Glausch
2023-09-28 13:05 ` Thomas Huth
2023-09-26 12:15 ` [PATCH v24 05/21] s390x/sclp: reporting the maximum nested topology entries Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 06/21] s390x/cpu topology: resetting the Topology-Change-Report Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 07/21] s390x/cpu topology: interception of PTF instruction Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 08/21] target/s390x/cpu topology: activate CPU topology Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 09/21] qapi/s390x/cpu topology: set-cpu-topology qmp command Nina Schoetterl-Glausch
2023-09-28 13:29 ` Thomas Huth
2023-09-26 12:15 ` [PATCH v24 10/21] machine: adding s390 topology to query-cpu-fast Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 11/21] machine: adding s390 topology to info hotpluggable-cpus Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 12/21] qapi/s390x/cpu topology: CPU_POLARIZATION_CHANGE qapi event Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 13/21] qapi/s390x/cpu topology: add query-s390x-cpu-polarization command Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 14/21] docs/s390x/cpu topology: document s390x cpu topology Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 15/21] tests/avocado: s390x cpu topology core Nina Schoetterl-Glausch
2023-09-28 14:54 ` Thomas Huth
2023-09-26 12:15 ` [PATCH v24 16/21] tests/avocado: s390x cpu topology polarization Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 17/21] tests/avocado: s390x cpu topology entitlement tests Nina Schoetterl-Glausch
2023-09-28 14:55 ` Thomas Huth
2023-09-26 12:15 ` [PATCH v24 18/21] tests/avocado: s390x cpu topology test dedicated CPU Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 19/21] tests/avocado: s390x cpu topology test socket full Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 20/21] tests/avocado: s390x cpu topology dedicated errors Nina Schoetterl-Glausch
2023-09-26 12:15 ` [PATCH v24 21/21] tests/avocado: s390x cpu topology bad move Nina Schoetterl-Glausch
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.