[PATCH v7 00/10] Initial Marvell PXA1908 support

[PATCH v7 00/10] Initial Marvell PXA1908 support

[Duje Mihanović]

Hello,

This series adds initial support for the Marvell PXA1908 SoC and
"samsung,coreprimevelte", a smartphone using the SoC.

USB works and the phone can boot a rootfs from an SD card, but there are
some warnings in the dmesg:

During SMP initialization:
[    0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
[    0.006542] CPU features: Unsupported CPU feature variation detected.
[    0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
[    0.010710] Detected VIPT I-cache on CPU2
[    0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
[    0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
[    0.014849] Detected VIPT I-cache on CPU3
[    0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
[    0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]

SMMU probing fails:
[    0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
[    0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
[    0.101816] arm-smmu c0010000.iommu:         no translation support!

On Samsung's PXA1908 phones, the bootloader does not start the ARM
system timer, and my temporary solution (which isn't present in this
series) was to put the code for starting the timer in the clock driver.
Would this hack be accepted upstream in the form of a platform or
clocksource driver such as drivers/clocksource/timer-mediatek-cpux.c?

A 3.14 based Marvell tree is available on GitHub
acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
CoderCharmander/g361f-kernel.

Andreas Färber attempted to upstream support for this SoC in 2017:
https://lore.kernel.org/lkml/20170222022929.10540-1-afaerber@suse.de/

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>

Changes in v7:
- Suppress SND_MMP_SOC_SSPA on ARM64
- Update trailers
- Rebase on v6.6-rc7
- Link to v6: https://lore.kernel.org/r/20231010-pxa1908-lkml-v6-0-b2fe09240cf8@skole.hr

Changes in v6:
- Address maintainer comments:
  - Add "marvell,pxa1908-padconf" binding to pinctrl-single driver
- Drop GPIO patch as it's been pulled
- Update trailers
- Rebase on v6.6-rc5
- Link to v5: https://lore.kernel.org/r/20230812-pxa1908-lkml-v5-0-a5d51937ee34@skole.hr

Changes in v5:
- Address maintainer comments:
  - Move *_NR_CLKS to clock driver from dt binding file
- Allocate correct number of clocks for each block instead of blindly
  allocating 50 for each
- Link to v4: https://lore.kernel.org/r/20230807-pxa1908-lkml-v4-0-cb387d73b452@skole.hr

Changes in v4:
- Address maintainer comments:
  - Relicense clock binding file to BSD-2
- Add pinctrl-names to SD card node
- Add vgic registers to GIC node
- Rebase on v6.5-rc5
- Link to v3: https://lore.kernel.org/r/20230804-pxa1908-lkml-v3-0-8e48fca37099@skole.hr

Changes in v3:
- Address maintainer comments:
  - Drop GPIO dynamic allocation patch
  - Move clock register offsets into driver (instead of bindings file)
  - Add missing Tested-by trailer to u32_fract patch
  - Move SoC binding to arm/mrvl/mrvl.yaml
- Add serial0 alias and stdout-path to board dts to enable UART
  debugging
- Rebase on v6.5-rc4
- Link to v2: https://lore.kernel.org/r/20230727162909.6031-1-duje.mihanovic@skole.hr

Changes in v2:
- Remove earlycon patch as it's been merged into tty-next
- Address maintainer comments:
  - Clarify GPIO regressions on older PXA platforms
  - Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
  - Add missing includes to clock driver
  - Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
  - Dual license clock bindings
  - Change clock IDs to decimal
  - Fix underscores in dt node names
  - Move chosen node to top of board dts
  - Clean up documentation
  - Reorder commits
  - Drop pxa,rev-id
- Rename muic-i2c to i2c-muic
- Reword some commits
- Move framebuffer node to chosen
- Add aliases for mmc nodes
- Rebase on v6.5-rc3
- Link to v1: https://lore.kernel.org/r/20230721210042.21535-1-duje.mihanovic@skole.hr

---
Andy Shevchenko (1):
      clk: mmp: Switch to use struct u32_fract instead of custom one

Duje Mihanović (9):
      dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
      pinctrl: single: add marvell,pxa1908-padconf compatible
      dt-bindings: clock: Add Marvell PXA1908 clock bindings
      clk: mmp: Add Marvell PXA1908 clock driver
      ASoC: pxa: Suppress SSPA on ARM64
      dt-bindings: marvell: Document PXA1908 SoC
      arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
      arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
      MAINTAINERS: add myself as Marvell PXA1908 maintainer

 .../devicetree/bindings/arm/mrvl/mrvl.yaml         |   5 +
 .../devicetree/bindings/clock/marvell,pxa1908.yaml |  48 +++
 .../bindings/pinctrl/pinctrl-single.yaml           |   4 +
 MAINTAINERS                                        |   9 +
 arch/arm64/Kconfig.platforms                       |  11 +
 arch/arm64/boot/dts/marvell/Makefile               |   3 +
 .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 333 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/pxa1908.dtsi           | 295 ++++++++++++++++++
 drivers/clk/mmp/Makefile                           |   2 +-
 drivers/clk/mmp/clk-frac.c                         |  57 ++--
 drivers/clk/mmp/clk-of-mmp2.c                      |  26 +-
 drivers/clk/mmp/clk-of-pxa168.c                    |   4 +-
 drivers/clk/mmp/clk-of-pxa1908.c                   | 328 ++++++++++++++++++++
 drivers/clk/mmp/clk-of-pxa1928.c                   |   6 +-
 drivers/clk/mmp/clk-of-pxa910.c                    |   4 +-
 drivers/clk/mmp/clk.h                              |  10 +-
 drivers/pinctrl/pinctrl-single.c                   |   1 +
 include/dt-bindings/clock/marvell,pxa1908.h        |  88 ++++++
 sound/soc/pxa/Kconfig                              |   2 +-
 19 files changed, 1178 insertions(+), 58 deletions(-)
---
base-commit: 05d3ef8bba77c1b5f98d941d8b2d4aeab8118ef1
change-id: 20230803-pxa1908-lkml-6830e8da45c7

Best regards,
-- 
Duje Mihanović <duje.mihanovic@skole.hr>

[PATCH v7 00/10] Initial Marvell PXA1908 support

[Duje Mihanović]

Hello,

This series adds initial support for the Marvell PXA1908 SoC and
"samsung,coreprimevelte", a smartphone using the SoC.

USB works and the phone can boot a rootfs from an SD card, but there are
some warnings in the dmesg:

During SMP initialization:
[    0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
[    0.006542] CPU features: Unsupported CPU feature variation detected.
[    0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
[    0.010710] Detected VIPT I-cache on CPU2
[    0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
[    0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
[    0.014849] Detected VIPT I-cache on CPU3
[    0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
[    0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]

SMMU probing fails:
[    0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
[    0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
[    0.101816] arm-smmu c0010000.iommu:         no translation support!

On Samsung's PXA1908 phones, the bootloader does not start the ARM
system timer, and my temporary solution (which isn't present in this
series) was to put the code for starting the timer in the clock driver.
Would this hack be accepted upstream in the form of a platform or
clocksource driver such as drivers/clocksource/timer-mediatek-cpux.c?

A 3.14 based Marvell tree is available on GitHub
acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
CoderCharmander/g361f-kernel.

Andreas Färber attempted to upstream support for this SoC in 2017:
https://lore.kernel.org/lkml/20170222022929.10540-1-afaerber@suse.de/

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>

Changes in v7:
- Suppress SND_MMP_SOC_SSPA on ARM64
- Update trailers
- Rebase on v6.6-rc7
- Link to v6: https://lore.kernel.org/r/20231010-pxa1908-lkml-v6-0-b2fe09240cf8@skole.hr

Changes in v6:
- Address maintainer comments:
  - Add "marvell,pxa1908-padconf" binding to pinctrl-single driver
- Drop GPIO patch as it's been pulled
- Update trailers
- Rebase on v6.6-rc5
- Link to v5: https://lore.kernel.org/r/20230812-pxa1908-lkml-v5-0-a5d51937ee34@skole.hr

Changes in v5:
- Address maintainer comments:
  - Move *_NR_CLKS to clock driver from dt binding file
- Allocate correct number of clocks for each block instead of blindly
  allocating 50 for each
- Link to v4: https://lore.kernel.org/r/20230807-pxa1908-lkml-v4-0-cb387d73b452@skole.hr

Changes in v4:
- Address maintainer comments:
  - Relicense clock binding file to BSD-2
- Add pinctrl-names to SD card node
- Add vgic registers to GIC node
- Rebase on v6.5-rc5
- Link to v3: https://lore.kernel.org/r/20230804-pxa1908-lkml-v3-0-8e48fca37099@skole.hr

Changes in v3:
- Address maintainer comments:
  - Drop GPIO dynamic allocation patch
  - Move clock register offsets into driver (instead of bindings file)
  - Add missing Tested-by trailer to u32_fract patch
  - Move SoC binding to arm/mrvl/mrvl.yaml
- Add serial0 alias and stdout-path to board dts to enable UART
  debugging
- Rebase on v6.5-rc4
- Link to v2: https://lore.kernel.org/r/20230727162909.6031-1-duje.mihanovic@skole.hr

Changes in v2:
- Remove earlycon patch as it's been merged into tty-next
- Address maintainer comments:
  - Clarify GPIO regressions on older PXA platforms
  - Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
  - Add missing includes to clock driver
  - Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
  - Dual license clock bindings
  - Change clock IDs to decimal
  - Fix underscores in dt node names
  - Move chosen node to top of board dts
  - Clean up documentation
  - Reorder commits
  - Drop pxa,rev-id
- Rename muic-i2c to i2c-muic
- Reword some commits
- Move framebuffer node to chosen
- Add aliases for mmc nodes
- Rebase on v6.5-rc3
- Link to v1: https://lore.kernel.org/r/20230721210042.21535-1-duje.mihanovic@skole.hr

---
Andy Shevchenko (1):
      clk: mmp: Switch to use struct u32_fract instead of custom one

Duje Mihanović (9):
      dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
      pinctrl: single: add marvell,pxa1908-padconf compatible
      dt-bindings: clock: Add Marvell PXA1908 clock bindings
      clk: mmp: Add Marvell PXA1908 clock driver
      ASoC: pxa: Suppress SSPA on ARM64
      dt-bindings: marvell: Document PXA1908 SoC
      arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
      arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
      MAINTAINERS: add myself as Marvell PXA1908 maintainer

 .../devicetree/bindings/arm/mrvl/mrvl.yaml         |   5 +
 .../devicetree/bindings/clock/marvell,pxa1908.yaml |  48 +++
 .../bindings/pinctrl/pinctrl-single.yaml           |   4 +
 MAINTAINERS                                        |   9 +
 arch/arm64/Kconfig.platforms                       |  11 +
 arch/arm64/boot/dts/marvell/Makefile               |   3 +
 .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 333 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/pxa1908.dtsi           | 295 ++++++++++++++++++
 drivers/clk/mmp/Makefile                           |   2 +-
 drivers/clk/mmp/clk-frac.c                         |  57 ++--
 drivers/clk/mmp/clk-of-mmp2.c                      |  26 +-
 drivers/clk/mmp/clk-of-pxa168.c                    |   4 +-
 drivers/clk/mmp/clk-of-pxa1908.c                   | 328 ++++++++++++++++++++
 drivers/clk/mmp/clk-of-pxa1928.c                   |   6 +-
 drivers/clk/mmp/clk-of-pxa910.c                    |   4 +-
 drivers/clk/mmp/clk.h                              |  10 +-
 drivers/pinctrl/pinctrl-single.c                   |   1 +
 include/dt-bindings/clock/marvell,pxa1908.h        |  88 ++++++
 sound/soc/pxa/Kconfig                              |   2 +-
 19 files changed, 1178 insertions(+), 58 deletions(-)
---
base-commit: 05d3ef8bba77c1b5f98d941d8b2d4aeab8118ef1
change-id: 20230803-pxa1908-lkml-6830e8da45c7

Best regards,
-- 
Duje Mihanović <duje.mihanovic@skole.hr>



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 01/10] clk: mmp: Switch to use struct u32_fract instead of custom one

[Duje Mihanović]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The struct mmp_clk_factor_tbl repeats the generic struct u32_fract.
Kill the custom one and use the generic one instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/clk/mmp/clk-frac.c       | 57 ++++++++++++++++++++--------------------
 drivers/clk/mmp/clk-of-mmp2.c    | 26 +++++++++---------
 drivers/clk/mmp/clk-of-pxa168.c  |  4 +--
 drivers/clk/mmp/clk-of-pxa1928.c |  6 ++---
 drivers/clk/mmp/clk-of-pxa910.c  |  4 +--
 drivers/clk/mmp/clk.h            | 10 +++----
 6 files changed, 51 insertions(+), 56 deletions(-)

diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index 1b90867b60c4..6556f6ada2e8 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -26,14 +26,15 @@ static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	u64 rate = 0, prev_rate;
+	struct u32_fract *d;
 	int i;
 
 	for (i = 0; i < factor->ftbl_cnt; i++) {
-		prev_rate = rate;
-		rate = *prate;
-		rate *= factor->ftbl[i].den;
-		do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+		d = &factor->ftbl[i];
 
+		prev_rate = rate;
+		rate = (u64)(*prate) * d->denominator;
+		do_div(rate, d->numerator * factor->masks->factor);
 		if (rate > drate)
 			break;
 	}
@@ -52,23 +53,22 @@ static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	struct mmp_clk_factor_masks *masks = factor->masks;
-	unsigned int val, num, den;
+	struct u32_fract d;
+	unsigned int val;
 	u64 rate;
 
 	val = readl_relaxed(factor->base);
 
 	/* calculate numerator */
-	num = (val >> masks->num_shift) & masks->num_mask;
+	d.numerator = (val >> masks->num_shift) & masks->num_mask;
 
 	/* calculate denominator */
-	den = (val >> masks->den_shift) & masks->den_mask;
-
-	if (!den)
+	d.denominator = (val >> masks->den_shift) & masks->den_mask;
+	if (!d.denominator)
 		return 0;
 
-	rate = parent_rate;
-	rate *= den;
-	do_div(rate, num * factor->masks->factor);
+	rate = (u64)parent_rate * d.denominator;
+	do_div(rate, d.numerator * factor->masks->factor);
 
 	return rate;
 }
@@ -82,18 +82,18 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
 	int i;
 	unsigned long val;
 	unsigned long flags = 0;
+	struct u32_fract *d;
 	u64 rate = 0;
 
 	for (i = 0; i < factor->ftbl_cnt; i++) {
-		rate = prate;
-		rate *= factor->ftbl[i].den;
-		do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+		d = &factor->ftbl[i];
 
+		rate = (u64)prate * d->denominator;
+		do_div(rate, d->numerator * factor->masks->factor);
 		if (rate > drate)
 			break;
 	}
-	if (i > 0)
-		i--;
+	d = i ? &factor->ftbl[i - 1] : &factor->ftbl[0];
 
 	if (factor->lock)
 		spin_lock_irqsave(factor->lock, flags);
@@ -101,10 +101,10 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
 	val = readl_relaxed(factor->base);
 
 	val &= ~(masks->num_mask << masks->num_shift);
-	val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift;
+	val |= (d->numerator & masks->num_mask) << masks->num_shift;
 
 	val &= ~(masks->den_mask << masks->den_shift);
-	val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift;
+	val |= (d->denominator & masks->den_mask) << masks->den_shift;
 
 	writel_relaxed(val, factor->base);
 
@@ -118,7 +118,8 @@ static int clk_factor_init(struct clk_hw *hw)
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	struct mmp_clk_factor_masks *masks = factor->masks;
-	u32 val, num, den;
+	struct u32_fract d;
+	u32 val;
 	int i;
 	unsigned long flags = 0;
 
@@ -128,23 +129,22 @@ static int clk_factor_init(struct clk_hw *hw)
 	val = readl(factor->base);
 
 	/* calculate numerator */
-	num = (val >> masks->num_shift) & masks->num_mask;
+	d.numerator = (val >> masks->num_shift) & masks->num_mask;
 
 	/* calculate denominator */
-	den = (val >> masks->den_shift) & masks->den_mask;
+	d.denominator = (val >> masks->den_shift) & masks->den_mask;
 
 	for (i = 0; i < factor->ftbl_cnt; i++)
-		if (den == factor->ftbl[i].den && num == factor->ftbl[i].num)
+		if (d.denominator == factor->ftbl[i].denominator &&
+		    d.numerator == factor->ftbl[i].numerator)
 			break;
 
 	if (i >= factor->ftbl_cnt) {
 		val &= ~(masks->num_mask << masks->num_shift);
-		val |= (factor->ftbl[0].num & masks->num_mask) <<
-			masks->num_shift;
+		val |= (factor->ftbl[0].numerator & masks->num_mask) << masks->num_shift;
 
 		val &= ~(masks->den_mask << masks->den_shift);
-		val |= (factor->ftbl[0].den & masks->den_mask) <<
-			masks->den_shift;
+		val |= (factor->ftbl[0].denominator & masks->den_mask) << masks->den_shift;
 	}
 
 	if (!(val & masks->enable_mask) || i >= factor->ftbl_cnt) {
@@ -168,8 +168,7 @@ static const struct clk_ops clk_factor_ops = {
 struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
 		unsigned long flags, void __iomem *base,
 		struct mmp_clk_factor_masks *masks,
-		struct mmp_clk_factor_tbl *ftbl,
-		unsigned int ftbl_cnt, spinlock_t *lock)
+		struct u32_fract *ftbl, unsigned int ftbl_cnt, spinlock_t *lock)
 {
 	struct mmp_clk_factor *factor;
 	struct clk_init_data init;
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index eaad36ee323d..a4f15cee630e 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -143,9 +143,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
-	{.num = 3521, .den = 689},	/*19.23MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
+	{ .numerator = 3521, .denominator =  689 },	/* 19.23MHZ */
 };
 
 static struct mmp_clk_factor_masks i2s_factor_masks = {
@@ -157,16 +157,16 @@ static struct mmp_clk_factor_masks i2s_factor_masks = {
 	.enable_mask = 0xd0000000,
 };
 
-static struct mmp_clk_factor_tbl i2s_factor_tbl[] = {
-	{.num = 24868, .den =  511},	/*  2.0480 MHz */
-	{.num = 28003, .den =  793},	/*  2.8224 MHz */
-	{.num = 24941, .den = 1025},	/*  4.0960 MHz */
-	{.num = 28003, .den = 1586},	/*  5.6448 MHz */
-	{.num = 31158, .den = 2561},	/*  8.1920 MHz */
-	{.num = 16288, .den = 1845},	/* 11.2896 MHz */
-	{.num = 20772, .den = 2561},	/* 12.2880 MHz */
-	{.num =  8144, .den = 1845},	/* 22.5792 MHz */
-	{.num = 10386, .den = 2561},	/* 24.5760 MHz */
+static struct u32_fract i2s_factor_tbl[] = {
+	{ .numerator = 24868, .denominator =  511 },	/*  2.0480 MHz */
+	{ .numerator = 28003, .denominator =  793 },	/*  2.8224 MHz */
+	{ .numerator = 24941, .denominator = 1025 },	/*  4.0960 MHz */
+	{ .numerator = 28003, .denominator = 1586 },	/*  5.6448 MHz */
+	{ .numerator = 31158, .denominator = 2561 },	/*  8.1920 MHz */
+	{ .numerator = 16288, .denominator = 1845 },	/* 11.2896 MHz */
+	{ .numerator = 20772, .denominator = 2561 },	/* 12.2880 MHz */
+	{ .numerator =  8144, .denominator = 1845 },	/* 22.5792 MHz */
+	{ .numerator = 10386, .denominator = 2561 },	/* 24.5760 MHz */
 };
 
 static DEFINE_SPINLOCK(acgr_lock);
diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c
index fb0df64cf053..ab5f83e77305 100644
--- a/drivers/clk/mmp/clk-of-pxa168.c
+++ b/drivers/clk/mmp/clk-of-pxa168.c
@@ -106,8 +106,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static void pxa168_pll_init(struct pxa168_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa1928.c b/drivers/clk/mmp/clk-of-pxa1928.c
index 9def4b5f10e9..ebb6e278eda3 100644
--- a/drivers/clk/mmp/clk-of-pxa1928.c
+++ b/drivers/clk/mmp/clk-of-pxa1928.c
@@ -61,9 +61,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 832, .den = 234},	/*58.5MHZ */
-	{.num = 1, .den = 1},		/*26MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 832, .denominator = 234 },	/* 58.5MHZ */
+	{ .numerator =   1, .denominator =   1 },	/* 26MHZ */
 };
 
 static void pxa1928_pll_init(struct pxa1928_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c
index 7a38c424782e..fe65e7bdb411 100644
--- a/drivers/clk/mmp/clk-of-pxa910.c
+++ b/drivers/clk/mmp/clk-of-pxa910.c
@@ -86,8 +86,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static void pxa910_pll_init(struct pxa910_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 55ac05379781..c83cec169ddc 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -3,6 +3,7 @@
 #define __MACH_MMP_CLK_H
 
 #include <linux/clk-provider.h>
+#include <linux/math.h>
 #include <linux/pm_domain.h>
 #include <linux/clkdev.h>
 
@@ -20,16 +21,11 @@ struct mmp_clk_factor_masks {
 	unsigned int enable_mask;
 };
 
-struct mmp_clk_factor_tbl {
-	unsigned int num;
-	unsigned int den;
-};
-
 struct mmp_clk_factor {
 	struct clk_hw hw;
 	void __iomem *base;
 	struct mmp_clk_factor_masks *masks;
-	struct mmp_clk_factor_tbl *ftbl;
+	struct u32_fract *ftbl;
 	unsigned int ftbl_cnt;
 	spinlock_t *lock;
 };
@@ -37,7 +33,7 @@ struct mmp_clk_factor {
 extern struct clk *mmp_clk_register_factor(const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *base, struct mmp_clk_factor_masks *masks,
-		struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt,
+		struct u32_fract *ftbl, unsigned int ftbl_cnt,
 		spinlock_t *lock);
 
 /* Clock type "mix" */

-- 
2.42.0

[PATCH v7 01/10] clk: mmp: Switch to use struct u32_fract instead of custom one

[Duje Mihanović]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The struct mmp_clk_factor_tbl repeats the generic struct u32_fract.
Kill the custom one and use the generic one instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/clk/mmp/clk-frac.c       | 57 ++++++++++++++++++++--------------------
 drivers/clk/mmp/clk-of-mmp2.c    | 26 +++++++++---------
 drivers/clk/mmp/clk-of-pxa168.c  |  4 +--
 drivers/clk/mmp/clk-of-pxa1928.c |  6 ++---
 drivers/clk/mmp/clk-of-pxa910.c  |  4 +--
 drivers/clk/mmp/clk.h            | 10 +++----
 6 files changed, 51 insertions(+), 56 deletions(-)

diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index 1b90867b60c4..6556f6ada2e8 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -26,14 +26,15 @@ static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	u64 rate = 0, prev_rate;
+	struct u32_fract *d;
 	int i;
 
 	for (i = 0; i < factor->ftbl_cnt; i++) {
-		prev_rate = rate;
-		rate = *prate;
-		rate *= factor->ftbl[i].den;
-		do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+		d = &factor->ftbl[i];
 
+		prev_rate = rate;
+		rate = (u64)(*prate) * d->denominator;
+		do_div(rate, d->numerator * factor->masks->factor);
 		if (rate > drate)
 			break;
 	}
@@ -52,23 +53,22 @@ static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	struct mmp_clk_factor_masks *masks = factor->masks;
-	unsigned int val, num, den;
+	struct u32_fract d;
+	unsigned int val;
 	u64 rate;
 
 	val = readl_relaxed(factor->base);
 
 	/* calculate numerator */
-	num = (val >> masks->num_shift) & masks->num_mask;
+	d.numerator = (val >> masks->num_shift) & masks->num_mask;
 
 	/* calculate denominator */
-	den = (val >> masks->den_shift) & masks->den_mask;
-
-	if (!den)
+	d.denominator = (val >> masks->den_shift) & masks->den_mask;
+	if (!d.denominator)
 		return 0;
 
-	rate = parent_rate;
-	rate *= den;
-	do_div(rate, num * factor->masks->factor);
+	rate = (u64)parent_rate * d.denominator;
+	do_div(rate, d.numerator * factor->masks->factor);
 
 	return rate;
 }
@@ -82,18 +82,18 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
 	int i;
 	unsigned long val;
 	unsigned long flags = 0;
+	struct u32_fract *d;
 	u64 rate = 0;
 
 	for (i = 0; i < factor->ftbl_cnt; i++) {
-		rate = prate;
-		rate *= factor->ftbl[i].den;
-		do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+		d = &factor->ftbl[i];
 
+		rate = (u64)prate * d->denominator;
+		do_div(rate, d->numerator * factor->masks->factor);
 		if (rate > drate)
 			break;
 	}
-	if (i > 0)
-		i--;
+	d = i ? &factor->ftbl[i - 1] : &factor->ftbl[0];
 
 	if (factor->lock)
 		spin_lock_irqsave(factor->lock, flags);
@@ -101,10 +101,10 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
 	val = readl_relaxed(factor->base);
 
 	val &= ~(masks->num_mask << masks->num_shift);
-	val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift;
+	val |= (d->numerator & masks->num_mask) << masks->num_shift;
 
 	val &= ~(masks->den_mask << masks->den_shift);
-	val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift;
+	val |= (d->denominator & masks->den_mask) << masks->den_shift;
 
 	writel_relaxed(val, factor->base);
 
@@ -118,7 +118,8 @@ static int clk_factor_init(struct clk_hw *hw)
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	struct mmp_clk_factor_masks *masks = factor->masks;
-	u32 val, num, den;
+	struct u32_fract d;
+	u32 val;
 	int i;
 	unsigned long flags = 0;
 
@@ -128,23 +129,22 @@ static int clk_factor_init(struct clk_hw *hw)
 	val = readl(factor->base);
 
 	/* calculate numerator */
-	num = (val >> masks->num_shift) & masks->num_mask;
+	d.numerator = (val >> masks->num_shift) & masks->num_mask;
 
 	/* calculate denominator */
-	den = (val >> masks->den_shift) & masks->den_mask;
+	d.denominator = (val >> masks->den_shift) & masks->den_mask;
 
 	for (i = 0; i < factor->ftbl_cnt; i++)
-		if (den == factor->ftbl[i].den && num == factor->ftbl[i].num)
+		if (d.denominator == factor->ftbl[i].denominator &&
+		    d.numerator == factor->ftbl[i].numerator)
 			break;
 
 	if (i >= factor->ftbl_cnt) {
 		val &= ~(masks->num_mask << masks->num_shift);
-		val |= (factor->ftbl[0].num & masks->num_mask) <<
-			masks->num_shift;
+		val |= (factor->ftbl[0].numerator & masks->num_mask) << masks->num_shift;
 
 		val &= ~(masks->den_mask << masks->den_shift);
-		val |= (factor->ftbl[0].den & masks->den_mask) <<
-			masks->den_shift;
+		val |= (factor->ftbl[0].denominator & masks->den_mask) << masks->den_shift;
 	}
 
 	if (!(val & masks->enable_mask) || i >= factor->ftbl_cnt) {
@@ -168,8 +168,7 @@ static const struct clk_ops clk_factor_ops = {
 struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
 		unsigned long flags, void __iomem *base,
 		struct mmp_clk_factor_masks *masks,
-		struct mmp_clk_factor_tbl *ftbl,
-		unsigned int ftbl_cnt, spinlock_t *lock)
+		struct u32_fract *ftbl, unsigned int ftbl_cnt, spinlock_t *lock)
 {
 	struct mmp_clk_factor *factor;
 	struct clk_init_data init;
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index eaad36ee323d..a4f15cee630e 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -143,9 +143,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
-	{.num = 3521, .den = 689},	/*19.23MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
+	{ .numerator = 3521, .denominator =  689 },	/* 19.23MHZ */
 };
 
 static struct mmp_clk_factor_masks i2s_factor_masks = {
@@ -157,16 +157,16 @@ static struct mmp_clk_factor_masks i2s_factor_masks = {
 	.enable_mask = 0xd0000000,
 };
 
-static struct mmp_clk_factor_tbl i2s_factor_tbl[] = {
-	{.num = 24868, .den =  511},	/*  2.0480 MHz */
-	{.num = 28003, .den =  793},	/*  2.8224 MHz */
-	{.num = 24941, .den = 1025},	/*  4.0960 MHz */
-	{.num = 28003, .den = 1586},	/*  5.6448 MHz */
-	{.num = 31158, .den = 2561},	/*  8.1920 MHz */
-	{.num = 16288, .den = 1845},	/* 11.2896 MHz */
-	{.num = 20772, .den = 2561},	/* 12.2880 MHz */
-	{.num =  8144, .den = 1845},	/* 22.5792 MHz */
-	{.num = 10386, .den = 2561},	/* 24.5760 MHz */
+static struct u32_fract i2s_factor_tbl[] = {
+	{ .numerator = 24868, .denominator =  511 },	/*  2.0480 MHz */
+	{ .numerator = 28003, .denominator =  793 },	/*  2.8224 MHz */
+	{ .numerator = 24941, .denominator = 1025 },	/*  4.0960 MHz */
+	{ .numerator = 28003, .denominator = 1586 },	/*  5.6448 MHz */
+	{ .numerator = 31158, .denominator = 2561 },	/*  8.1920 MHz */
+	{ .numerator = 16288, .denominator = 1845 },	/* 11.2896 MHz */
+	{ .numerator = 20772, .denominator = 2561 },	/* 12.2880 MHz */
+	{ .numerator =  8144, .denominator = 1845 },	/* 22.5792 MHz */
+	{ .numerator = 10386, .denominator = 2561 },	/* 24.5760 MHz */
 };
 
 static DEFINE_SPINLOCK(acgr_lock);
diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c
index fb0df64cf053..ab5f83e77305 100644
--- a/drivers/clk/mmp/clk-of-pxa168.c
+++ b/drivers/clk/mmp/clk-of-pxa168.c
@@ -106,8 +106,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static void pxa168_pll_init(struct pxa168_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa1928.c b/drivers/clk/mmp/clk-of-pxa1928.c
index 9def4b5f10e9..ebb6e278eda3 100644
--- a/drivers/clk/mmp/clk-of-pxa1928.c
+++ b/drivers/clk/mmp/clk-of-pxa1928.c
@@ -61,9 +61,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 832, .den = 234},	/*58.5MHZ */
-	{.num = 1, .den = 1},		/*26MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 832, .denominator = 234 },	/* 58.5MHZ */
+	{ .numerator =   1, .denominator =   1 },	/* 26MHZ */
 };
 
 static void pxa1928_pll_init(struct pxa1928_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c
index 7a38c424782e..fe65e7bdb411 100644
--- a/drivers/clk/mmp/clk-of-pxa910.c
+++ b/drivers/clk/mmp/clk-of-pxa910.c
@@ -86,8 +86,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static void pxa910_pll_init(struct pxa910_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 55ac05379781..c83cec169ddc 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -3,6 +3,7 @@
 #define __MACH_MMP_CLK_H
 
 #include <linux/clk-provider.h>
+#include <linux/math.h>
 #include <linux/pm_domain.h>
 #include <linux/clkdev.h>
 
@@ -20,16 +21,11 @@ struct mmp_clk_factor_masks {
 	unsigned int enable_mask;
 };
 
-struct mmp_clk_factor_tbl {
-	unsigned int num;
-	unsigned int den;
-};
-
 struct mmp_clk_factor {
 	struct clk_hw hw;
 	void __iomem *base;
 	struct mmp_clk_factor_masks *masks;
-	struct mmp_clk_factor_tbl *ftbl;
+	struct u32_fract *ftbl;
 	unsigned int ftbl_cnt;
 	spinlock_t *lock;
 };
@@ -37,7 +33,7 @@ struct mmp_clk_factor {
 extern struct clk *mmp_clk_register_factor(const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *base, struct mmp_clk_factor_masks *masks,
-		struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt,
+		struct u32_fract *ftbl, unsigned int ftbl_cnt,
 		spinlock_t *lock);
 
 /* Clock type "mix" */

-- 
2.42.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 02/10] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible

[Duje Mihanović]

Add the "marvell,pxa1908-padconf" compatible to allow migrating to a
separate pinctrl driver later.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
index 45a307d3ce16..0f7e16a28990 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
@@ -32,6 +32,10 @@ properties:
               - ti,omap4-padconf
               - ti,omap5-padconf
           - const: pinctrl-single
+      - items:
+          - enum:
+              - marvell,pxa1908-padconf
+          - const: pinconf-single
 
   reg:
     maxItems: 1

-- 
2.42.0

[PATCH v7 02/10] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible

[Duje Mihanović]

Add the "marvell,pxa1908-padconf" compatible to allow migrating to a
separate pinctrl driver later.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
index 45a307d3ce16..0f7e16a28990 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
@@ -32,6 +32,10 @@ properties:
               - ti,omap4-padconf
               - ti,omap5-padconf
           - const: pinctrl-single
+      - items:
+          - enum:
+              - marvell,pxa1908-padconf
+          - const: pinconf-single
 
   reg:
     maxItems: 1

-- 
2.42.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 03/10] pinctrl: single: add marvell,pxa1908-padconf compatible

[Duje Mihanović]

Add the "marvell,pxa1908-padconf" compatible to allow migrating to a
separate pinctrl driver later.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/pinctrl/pinctrl-single.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 461a7c02d4a3..a36f750cfe9f 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -1968,6 +1968,7 @@ static const struct pcs_soc_data pinconf_single = {
 };
 
 static const struct of_device_id pcs_of_match[] = {
+	{ .compatible = "marvell,pxa1908-padconf", .data = &pinconf_single },
 	{ .compatible = "ti,am437-padconf", .data = &pinctrl_single_am437x },
 	{ .compatible = "ti,am654-padconf", .data = &pinctrl_single_am654 },
 	{ .compatible = "ti,dra7-padconf", .data = &pinctrl_single_dra7 },

-- 
2.42.0

[PATCH v7 03/10] pinctrl: single: add marvell,pxa1908-padconf compatible

[Duje Mihanović]

Add the "marvell,pxa1908-padconf" compatible to allow migrating to a
separate pinctrl driver later.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/pinctrl/pinctrl-single.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 461a7c02d4a3..a36f750cfe9f 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -1968,6 +1968,7 @@ static const struct pcs_soc_data pinconf_single = {
 };
 
 static const struct of_device_id pcs_of_match[] = {
+	{ .compatible = "marvell,pxa1908-padconf", .data = &pinconf_single },
 	{ .compatible = "ti,am437-padconf", .data = &pinctrl_single_am437x },
 	{ .compatible = "ti,am654-padconf", .data = &pinctrl_single_am654 },
 	{ .compatible = "ti,dra7-padconf", .data = &pinctrl_single_dra7 },

-- 
2.42.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 04/10] dt-bindings: clock: Add Marvell PXA1908 clock bindings

[Duje Mihanović]

Add dt bindings and documentation for the Marvell PXA1908 clock
controller.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 .../devicetree/bindings/clock/marvell,pxa1908.yaml | 48 ++++++++++++
 include/dt-bindings/clock/marvell,pxa1908.h        | 88 ++++++++++++++++++++++
 2 files changed, 136 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
new file mode 100644
index 000000000000..4e78933232b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,pxa1908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1908 Clock Controllers
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The PXA1908 clock subsystem generates and supplies clock to various
+  controllers within the PXA1908 SoC. The PXA1908 contains numerous clock
+  controller blocks, with the ones currently supported being APBC, APBCP, MPMU
+  and APMU roughly corresponding to internal buses.
+
+  All these clock identifiers could be found in <include/dt-bindings/marvell,pxa1908.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pxa1908-apbc
+      - marvell,pxa1908-apbcp
+      - marvell,pxa1908-mpmu
+      - marvell,pxa1908-apmu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # APMU block:
+  - |
+    clock-controller@d4282800 {
+      compatible = "marvell,pxa1908-apmu";
+      reg = <0xd4282800 0x400>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/marvell,pxa1908.h b/include/dt-bindings/clock/marvell,pxa1908.h
new file mode 100644
index 000000000000..fb15b0d0cd4c
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa1908.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+#ifndef __DTS_MARVELL_PXA1908_CLOCK_H
+#define __DTS_MARVELL_PXA1908_CLOCK_H
+
+/* plls */
+#define PXA1908_CLK_CLK32		1
+#define PXA1908_CLK_VCTCXO		2
+#define PXA1908_CLK_PLL1_624		3
+#define PXA1908_CLK_PLL1_416		4
+#define PXA1908_CLK_PLL1_499		5
+#define PXA1908_CLK_PLL1_832		6
+#define PXA1908_CLK_PLL1_1248		7
+#define PXA1908_CLK_PLL1_D2		8
+#define PXA1908_CLK_PLL1_D4		9
+#define PXA1908_CLK_PLL1_D8		10
+#define PXA1908_CLK_PLL1_D16		11
+#define PXA1908_CLK_PLL1_D6		12
+#define PXA1908_CLK_PLL1_D12		13
+#define PXA1908_CLK_PLL1_D24		14
+#define PXA1908_CLK_PLL1_D48		15
+#define PXA1908_CLK_PLL1_D96		16
+#define PXA1908_CLK_PLL1_D13		17
+#define PXA1908_CLK_PLL1_32		18
+#define PXA1908_CLK_PLL1_208		19
+#define PXA1908_CLK_PLL1_117		20
+#define PXA1908_CLK_PLL1_416_GATE	21
+#define PXA1908_CLK_PLL1_624_GATE	22
+#define PXA1908_CLK_PLL1_832_GATE	23
+#define PXA1908_CLK_PLL1_1248_GATE	24
+#define PXA1908_CLK_PLL1_D2_GATE	25
+#define PXA1908_CLK_PLL1_499_EN		26
+#define PXA1908_CLK_PLL2VCO		27
+#define PXA1908_CLK_PLL2		28
+#define PXA1908_CLK_PLL2P		29
+#define PXA1908_CLK_PLL2VCODIV3		30
+#define PXA1908_CLK_PLL3VCO		31
+#define PXA1908_CLK_PLL3		32
+#define PXA1908_CLK_PLL3P		33
+#define PXA1908_CLK_PLL3VCODIV3		34
+#define PXA1908_CLK_PLL4VCO		35
+#define PXA1908_CLK_PLL4		36
+#define PXA1908_CLK_PLL4P		37
+#define PXA1908_CLK_PLL4VCODIV3		38
+
+/* apb (apbc) peripherals */
+#define PXA1908_CLK_UART0		1
+#define PXA1908_CLK_UART1		2
+#define PXA1908_CLK_GPIO		3
+#define PXA1908_CLK_PWM0		4
+#define PXA1908_CLK_PWM1		5
+#define PXA1908_CLK_PWM2		6
+#define PXA1908_CLK_PWM3		7
+#define PXA1908_CLK_SSP0		8
+#define PXA1908_CLK_SSP1		9
+#define PXA1908_CLK_IPC_RST		10
+#define PXA1908_CLK_RTC			11
+#define PXA1908_CLK_TWSI0		12
+#define PXA1908_CLK_KPC			13
+#define PXA1908_CLK_SWJTAG		14
+#define PXA1908_CLK_SSP2		15
+#define PXA1908_CLK_TWSI1		16
+#define PXA1908_CLK_THERMAL		17
+#define PXA1908_CLK_TWSI3		18
+
+/* apb (apbcp) peripherals */
+#define PXA1908_CLK_UART2		1
+#define PXA1908_CLK_TWSI2		2
+#define PXA1908_CLK_AICER		3
+
+/* axi (apmu) peripherals */
+#define PXA1908_CLK_CCIC1		1
+#define PXA1908_CLK_ISP			2
+#define PXA1908_CLK_DSI1		3
+#define PXA1908_CLK_DISP1		4
+#define PXA1908_CLK_CCIC0		5
+#define PXA1908_CLK_SDH0		6
+#define PXA1908_CLK_SDH1		7
+#define PXA1908_CLK_USB			8
+#define PXA1908_CLK_NF			9
+#define PXA1908_CLK_CORE_DEBUG		10
+#define PXA1908_CLK_VPU			11
+#define PXA1908_CLK_GC			12
+#define PXA1908_CLK_SDH2		13
+#define PXA1908_CLK_GC2D		14
+#define PXA1908_CLK_TRACE		15
+#define PXA1908_CLK_DVC_DFC_DEBUG	16
+
+#endif

-- 
2.42.0

[PATCH v7 04/10] dt-bindings: clock: Add Marvell PXA1908 clock bindings

[Duje Mihanović]

Add dt bindings and documentation for the Marvell PXA1908 clock
controller.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 .../devicetree/bindings/clock/marvell,pxa1908.yaml | 48 ++++++++++++
 include/dt-bindings/clock/marvell,pxa1908.h        | 88 ++++++++++++++++++++++
 2 files changed, 136 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
new file mode 100644
index 000000000000..4e78933232b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,pxa1908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1908 Clock Controllers
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The PXA1908 clock subsystem generates and supplies clock to various
+  controllers within the PXA1908 SoC. The PXA1908 contains numerous clock
+  controller blocks, with the ones currently supported being APBC, APBCP, MPMU
+  and APMU roughly corresponding to internal buses.
+
+  All these clock identifiers could be found in <include/dt-bindings/marvell,pxa1908.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pxa1908-apbc
+      - marvell,pxa1908-apbcp
+      - marvell,pxa1908-mpmu
+      - marvell,pxa1908-apmu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # APMU block:
+  - |
+    clock-controller@d4282800 {
+      compatible = "marvell,pxa1908-apmu";
+      reg = <0xd4282800 0x400>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/marvell,pxa1908.h b/include/dt-bindings/clock/marvell,pxa1908.h
new file mode 100644
index 000000000000..fb15b0d0cd4c
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa1908.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+#ifndef __DTS_MARVELL_PXA1908_CLOCK_H
+#define __DTS_MARVELL_PXA1908_CLOCK_H
+
+/* plls */
+#define PXA1908_CLK_CLK32		1
+#define PXA1908_CLK_VCTCXO		2
+#define PXA1908_CLK_PLL1_624		3
+#define PXA1908_CLK_PLL1_416		4
+#define PXA1908_CLK_PLL1_499		5
+#define PXA1908_CLK_PLL1_832		6
+#define PXA1908_CLK_PLL1_1248		7
+#define PXA1908_CLK_PLL1_D2		8
+#define PXA1908_CLK_PLL1_D4		9
+#define PXA1908_CLK_PLL1_D8		10
+#define PXA1908_CLK_PLL1_D16		11
+#define PXA1908_CLK_PLL1_D6		12
+#define PXA1908_CLK_PLL1_D12		13
+#define PXA1908_CLK_PLL1_D24		14
+#define PXA1908_CLK_PLL1_D48		15
+#define PXA1908_CLK_PLL1_D96		16
+#define PXA1908_CLK_PLL1_D13		17
+#define PXA1908_CLK_PLL1_32		18
+#define PXA1908_CLK_PLL1_208		19
+#define PXA1908_CLK_PLL1_117		20
+#define PXA1908_CLK_PLL1_416_GATE	21
+#define PXA1908_CLK_PLL1_624_GATE	22
+#define PXA1908_CLK_PLL1_832_GATE	23
+#define PXA1908_CLK_PLL1_1248_GATE	24
+#define PXA1908_CLK_PLL1_D2_GATE	25
+#define PXA1908_CLK_PLL1_499_EN		26
+#define PXA1908_CLK_PLL2VCO		27
+#define PXA1908_CLK_PLL2		28
+#define PXA1908_CLK_PLL2P		29
+#define PXA1908_CLK_PLL2VCODIV3		30
+#define PXA1908_CLK_PLL3VCO		31
+#define PXA1908_CLK_PLL3		32
+#define PXA1908_CLK_PLL3P		33
+#define PXA1908_CLK_PLL3VCODIV3		34
+#define PXA1908_CLK_PLL4VCO		35
+#define PXA1908_CLK_PLL4		36
+#define PXA1908_CLK_PLL4P		37
+#define PXA1908_CLK_PLL4VCODIV3		38
+
+/* apb (apbc) peripherals */
+#define PXA1908_CLK_UART0		1
+#define PXA1908_CLK_UART1		2
+#define PXA1908_CLK_GPIO		3
+#define PXA1908_CLK_PWM0		4
+#define PXA1908_CLK_PWM1		5
+#define PXA1908_CLK_PWM2		6
+#define PXA1908_CLK_PWM3		7
+#define PXA1908_CLK_SSP0		8
+#define PXA1908_CLK_SSP1		9
+#define PXA1908_CLK_IPC_RST		10
+#define PXA1908_CLK_RTC			11
+#define PXA1908_CLK_TWSI0		12
+#define PXA1908_CLK_KPC			13
+#define PXA1908_CLK_SWJTAG		14
+#define PXA1908_CLK_SSP2		15
+#define PXA1908_CLK_TWSI1		16
+#define PXA1908_CLK_THERMAL		17
+#define PXA1908_CLK_TWSI3		18
+
+/* apb (apbcp) peripherals */
+#define PXA1908_CLK_UART2		1
+#define PXA1908_CLK_TWSI2		2
+#define PXA1908_CLK_AICER		3
+
+/* axi (apmu) peripherals */
+#define PXA1908_CLK_CCIC1		1
+#define PXA1908_CLK_ISP			2
+#define PXA1908_CLK_DSI1		3
+#define PXA1908_CLK_DISP1		4
+#define PXA1908_CLK_CCIC0		5
+#define PXA1908_CLK_SDH0		6
+#define PXA1908_CLK_SDH1		7
+#define PXA1908_CLK_USB			8
+#define PXA1908_CLK_NF			9
+#define PXA1908_CLK_CORE_DEBUG		10
+#define PXA1908_CLK_VPU			11
+#define PXA1908_CLK_GC			12
+#define PXA1908_CLK_SDH2		13
+#define PXA1908_CLK_GC2D		14
+#define PXA1908_CLK_TRACE		15
+#define PXA1908_CLK_DVC_DFC_DEBUG	16
+
+#endif

-- 
2.42.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 05/10] clk: mmp: Add Marvell PXA1908 clock driver

[Duje Mihanović]

Add driver for Marvell PXA1908 clock controller blocks. The SoC has
numerous clock controller blocks, currently supporting APBC, APBCP, MPMU
and APMU.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/clk/mmp/Makefile         |   2 +-
 drivers/clk/mmp/clk-of-pxa1908.c | 328 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 329 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 441bf83080a1..69f9c3afde83 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
 obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
 obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
 
-obj-y += clk-of-pxa1928.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-of-pxa1908.o
diff --git a/drivers/clk/mmp/clk-of-pxa1908.c b/drivers/clk/mmp/clk-of-pxa1908.c
new file mode 100644
index 000000000000..753dd031b147
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-pxa1908.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/units.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APMU_CLK_GATE_CTRL	0x40
+#define MPMU_UART_PLL		0x14
+
+#define APBC_UART0		0x0
+#define APBC_UART1		0x4
+#define APBC_GPIO		0x8
+#define APBC_PWM0		0xc
+#define APBC_PWM1		0x10
+#define APBC_PWM2		0x14
+#define APBC_PWM3		0x18
+#define APBC_SSP0		0x1c
+#define APBC_SSP1		0x20
+#define APBC_IPC_RST		0x24
+#define APBC_RTC		0x28
+#define APBC_TWSI0		0x2c
+#define APBC_KPC		0x30
+#define APBC_SWJTAG		0x40
+#define APBC_SSP2		0x4c
+#define APBC_TWSI1		0x60
+#define APBC_THERMAL		0x6c
+#define APBC_TWSI3		0x70
+
+#define APBCP_UART2		0x1c
+#define APBCP_TWSI2		0x28
+#define APBCP_AICER		0x38
+
+#define APMU_CCIC1		0x24
+#define APMU_ISP		0x38
+#define APMU_DSI1		0x44
+#define APMU_DISP1		0x4c
+#define APMU_CCIC0		0x50
+#define APMU_SDH0		0x54
+#define APMU_SDH1		0x58
+#define APMU_USB		0x5c
+#define APMU_NF 		0x60
+#define APMU_VPU		0xa4
+#define APMU_GC 		0xcc
+#define APMU_SDH2		0xe0
+#define APMU_GC2D		0xf4
+#define APMU_TRACE		0x108
+#define APMU_DVC_DFC_DEBUG	0x140
+
+#define MPMU_NR_CLKS		39
+#define APBC_NR_CLKS		19
+#define APBCP_NR_CLKS		4
+#define APMU_NR_CLKS		17
+
+struct pxa1908_clk_unit {
+	struct mmp_clk_unit unit;
+	void __iomem *mpmu_base;
+	void __iomem *apmu_base;
+	void __iomem *apbc_base;
+	void __iomem *apbcp_base;
+	void __iomem *apbs_base;
+	void __iomem *ciu_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+	{PXA1908_CLK_CLK32, "clk32", NULL, 0, 32768},
+	{PXA1908_CLK_VCTCXO, "vctcxo", NULL, 0, 26 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_624, "pll1_624", NULL, 0, 624 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_416, "pll1_416", NULL, 0, 416 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_499, "pll1_499", NULL, 0, 499 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_832, "pll1_832", NULL, 0, 832 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_1248, "pll1_1248", NULL, 0, 1248 * HZ_PER_MHZ},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+	{PXA1908_CLK_PLL1_D2, "pll1_d2", "pll1_624", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D4, "pll1_d4", "pll1_d2", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D6, "pll1_d6", "pll1_d2", 1, 3, 0},
+	{PXA1908_CLK_PLL1_D8, "pll1_d8", "pll1_d4", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D12, "pll1_d12", "pll1_d6", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D13, "pll1_d13", "pll1_624", 1, 13, 0},
+	{PXA1908_CLK_PLL1_D16, "pll1_d16", "pll1_d8", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D24, "pll1_d24", "pll1_d12", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D48, "pll1_d48", "pll1_d24", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D96, "pll1_d96", "pll1_d48", 1, 2, 0},
+	{PXA1908_CLK_PLL1_32, "pll1_32", "pll1_d13", 2, 3, 0},
+	{PXA1908_CLK_PLL1_208, "pll1_208", "pll1_d2", 2, 3, 0},
+	{PXA1908_CLK_PLL1_117, "pll1_117", "pll1_624", 3, 16, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+	.factor = 2,
+	.num_mask = GENMASK(12, 0),
+	.den_mask = GENMASK(12, 0),
+	.num_shift = 16,
+	.den_shift = 0,
+};
+
+static struct u32_fract uart_factor_tbl[] = {
+	{.numerator = 8125, .denominator = 1536},	/* 14.745MHz */
+};
+
+static DEFINE_SPINLOCK(pll1_lock);
+static struct mmp_param_general_gate_clk pll1_gate_clks[] = {
+	{PXA1908_CLK_PLL1_D2_GATE, "pll1_d2_gate", "pll1_d2", 0, APMU_CLK_GATE_CTRL, 29, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_416_GATE, "pll1_416_gate", "pll1_416", 0, APMU_CLK_GATE_CTRL, 27, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_624_GATE, "pll1_624_gate", "pll1_624", 0, APMU_CLK_GATE_CTRL, 26, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_832_GATE, "pll1_832_gate", "pll1_832", 0, APMU_CLK_GATE_CTRL, 30, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_1248_GATE, "pll1_1248_gate", "pll1_1248", 0, APMU_CLK_GATE_CTRL, 28, 0, &pll1_lock},
+};
+
+static void pxa1908_pll_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+					ARRAY_SIZE(fixed_rate_clks));
+
+	mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+					ARRAY_SIZE(fixed_factor_clks));
+
+	mmp_clk_register_factor("uart_pll", "pll1_d4",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->mpmu_base + MPMU_UART_PLL,
+			&uart_factor_masks, uart_factor_tbl,
+			ARRAY_SIZE(uart_factor_tbl), NULL);
+
+}
+
+static DEFINE_SPINLOCK(pwm0_lock);
+static DEFINE_SPINLOCK(pwm2_lock);
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+
+static const char * const uart_parent_names[] = {"pll1_117", "uart_pll"};
+static const char * const ssp_parent_names[] = {"pll1_d16", "pll1_d48", "pll1_d24", "pll1_d12"};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+	{PXA1908_CLK_TWSI0, "twsi0_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_TWSI1, "twsi1_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_TWSI3, "twsi3_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 3, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+	{PXA1908_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+	{PXA1908_CLK_PWM0, "pwm0_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM0, 0x2, 2, 0, 0, &pwm0_lock},
+	{PXA1908_CLK_PWM1, "pwm1_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM1, 0x6, 2, 0, 0, NULL},
+	{PXA1908_CLK_PWM2, "pwm2_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM2, 0x2, 2, 0, 0, NULL},
+	{PXA1908_CLK_PWM3, "pwm3_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM3, 0x6, 2, 0, 0, NULL},
+	{PXA1908_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 3, 0, 0, &uart0_lock},
+	{PXA1908_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 3, 0, 0, &uart1_lock},
+};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+	{0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+	{0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+	{0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP0, 4, 3, 0, NULL},
+	{0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP2, 4, 3, 0, NULL},
+};
+
+static void pxa1908_apb_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_clk_register_gate(NULL, "pwm01_apb_share", "pll1_d48",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->apbc_base + APBC_PWM0,
+			0x5, 1, 0, 0, &pwm0_lock);
+	mmp_clk_register_gate(NULL, "pwm23_apb_share", "pll1_d48",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->apbc_base + APBC_PWM2,
+			0x5, 1, 0, 0, &pwm2_lock);
+	mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+			ARRAY_SIZE(apbc_mux_clks));
+	mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+			ARRAY_SIZE(apbc_gate_clks));
+}
+
+static struct mmp_param_gate_clk apbcp_gate_clks[] = {
+	{PXA1908_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+	{PXA1908_CLK_TWSI2, "twsi2_clk", "pll1_32", CLK_SET_RATE_PARENT, APBCP_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+	{PXA1908_CLK_AICER, "ripc_clk", NULL, 0, APBCP_AICER, 0x7, 0x2, 0x0, 0, NULL},
+};
+
+static struct mmp_param_mux_clk apbcp_mux_clks[] = {
+	{0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock},
+};
+
+static void pxa1908_apb_p_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->apbcp_base,
+			ARRAY_SIZE(apbcp_mux_clks));
+	mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->apbcp_base,
+			ARRAY_SIZE(apbcp_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static DEFINE_SPINLOCK(sdh2_lock);
+
+static const char * const sdh_parent_names[] = {"pll1_416", "pll1_624"};
+
+static struct mmp_clk_mix_config sdh_mix_config = {
+	.reg_info = DEFINE_MIX_REG_INFO(3, 8, 2, 6, 11),
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+	{PXA1908_CLK_USB, "usb_clk", NULL, 0, APMU_USB, 0x9, 0x9, 0x1, 0, NULL},
+	{PXA1908_CLK_SDH0, "sdh0_clk", "sdh0_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH0, 0x12, 0x12, 0x0, 0, &sdh0_lock},
+	{PXA1908_CLK_SDH1, "sdh1_clk", "sdh1_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH1, 0x12, 0x12, 0x0, 0, &sdh1_lock},
+	{PXA1908_CLK_SDH2, "sdh2_clk", "sdh2_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH2, 0x12, 0x12, 0x0, 0, &sdh2_lock}
+};
+
+static void pxa1908_axi_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_general_gate_clks(unit, pll1_gate_clks,
+			pxa_unit->apmu_base, ARRAY_SIZE(pll1_gate_clks));
+
+	sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH0;
+	mmp_clk_register_mix(NULL, "sdh0_mix_clk", sdh_parent_names,
+			ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+			&sdh_mix_config, &sdh0_lock);
+	sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH1;
+	mmp_clk_register_mix(NULL, "sdh1_mix_clk", sdh_parent_names,
+			ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+			&sdh_mix_config, &sdh1_lock);
+	sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH2;
+	mmp_clk_register_mix(NULL, "sdh2_mix_clk", sdh_parent_names,
+			ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+			&sdh_mix_config, &sdh2_lock);
+
+	mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+			ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void __init pxa1908_apbc_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->apbc_base = of_iomap(np, 0);
+	if (!pxa_unit->apbc_base) {
+		pr_err("failed to map apbc registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, APBC_NR_CLKS);
+
+	pxa1908_apb_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apbc, "marvell,pxa1908-apbc", pxa1908_apbc_clk_init);
+
+static void __init pxa1908_apbcp_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->apbcp_base = of_iomap(np, 0);
+	if (!pxa_unit->apbcp_base) {
+		pr_err("failed to map apbcp registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, APBCP_NR_CLKS);
+
+	pxa1908_apb_p_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apbcp, "marvell,pxa1908-apbcp", pxa1908_apbcp_clk_init);
+
+static void __init pxa1908_mpmu_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->mpmu_base = of_iomap(np, 0);
+	if (!pxa_unit->mpmu_base) {
+		pr_err("failed to map mpmu registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, MPMU_NR_CLKS);
+
+	pxa1908_pll_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_mpmu, "marvell,pxa1908-mpmu", pxa1908_mpmu_clk_init);
+
+static void __init pxa1908_apmu_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->apmu_base = of_iomap(np, 0);
+	if (!pxa_unit->apmu_base) {
+		pr_err("failed to map apmu registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, APMU_NR_CLKS);
+
+	pxa1908_axi_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apmu, "marvell,pxa1908-apmu", pxa1908_apmu_clk_init);

-- 
2.42.0