From: Neil Armstrong <neil.armstrong@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Neil Armstrong <neil.armstrong@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v3 0/3] pinctrl: qcom: Introduce Pinctrl/GPIO for SM8650
Date: Mon, 06 Nov 2023 09:32:29 +0100 [thread overview]
Message-ID: <20231106-topic-sm8650-upstream-tlmm-v3-0-0e179c368933@linaro.org> (raw)
The SM8650 Top Level Mode Multiplexer supports 211 GPIOs,
and the usual UFS Reset, SDC Clk/Cmd/Data special pins.
An handful of pins can have their IRQ generated by the PDC
module, and for this support for the new wakeup_present &
wakeup_enable_bit is required to allow the "wakeup" event
to be passed to PDC and generate an interrupt or a wakeup
system event.
As SM8550, it also supports the i2c_pull_bit bit to enable the
on-SoC load resistor for I2C busses.
Dependencies: None
For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v3:
- Correctly squashed intr_wakeup_ change protection with the spinlock
- Collected bindings reviewed-by
- Link to v2: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-tlmm-v2-0-9d4d4386452d@linaro.org
Changes in v2:
- Collect reviewed-bys
- Fixed unevaluatedProperties handling, and dropped the true properties
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-tlmm-v1-0-4e3d84a3a46b@linaro.org
---
Neil Armstrong (3):
dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer
pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits
pinctrl: qcom: Introduce the SM8650 Top Level Mode Multiplexer driver
.../bindings/pinctrl/qcom,sm8650-tlmm.yaml | 147 ++
drivers/pinctrl/qcom/Kconfig.msm | 8 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-msm.c | 42 +
drivers/pinctrl/qcom/pinctrl-msm.h | 5 +
drivers/pinctrl/qcom/pinctrl-sm8650.c | 1762 ++++++++++++++++++++
6 files changed, 1965 insertions(+)
---
base-commit: ed75ce58b3a55d2cd95b68a06fdb010e1e18d825
change-id: 20231016-topic-sm8650-upstream-tlmm-4ece354ef319
Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>
next reply other threads:[~2023-11-06 8:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-06 8:32 Neil Armstrong [this message]
2023-11-06 8:32 ` [PATCH v3 1/3] dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer Neil Armstrong
2023-11-06 8:32 ` [PATCH v3 2/3] pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits Neil Armstrong
2023-11-06 8:32 ` [PATCH v3 3/3] pinctrl: qcom: Introduce the SM8650 Top Level Mode Multiplexer driver Neil Armstrong
2023-11-13 14:06 ` [PATCH v3 0/3] pinctrl: qcom: Introduce Pinctrl/GPIO for SM8650 Linus Walleij
2023-11-13 14:46 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231106-topic-sm8650-upstream-tlmm-v3-0-0e179c368933@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.