All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 0/3] pinctrl: qcom: Introduce Pinctrl/GPIO for SM8650
@ 2023-11-06  8:32 Neil Armstrong
  2023-11-06  8:32 ` [PATCH v3 1/3] dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer Neil Armstrong
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Neil Armstrong @ 2023-11-06  8:32 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Linus Walleij,
	Rob Herring, Krzysztof Kozlowski, Conor Dooley
  Cc: linux-arm-msm, linux-gpio, devicetree, linux-kernel,
	Neil Armstrong, Krzysztof Kozlowski

The SM8650 Top Level Mode Multiplexer supports 211 GPIOs,
and the usual UFS Reset, SDC Clk/Cmd/Data special pins.

An handful of pins can have their IRQ generated by the PDC
module, and for this support for the new wakeup_present &
wakeup_enable_bit is required to allow the "wakeup" event
to be passed to PDC and generate an interrupt or a wakeup
system event.

As SM8550, it also supports the i2c_pull_bit bit to enable the
on-SoC load resistor for I2C busses.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v3:
- Correctly squashed intr_wakeup_ change protection with the spinlock
- Collected bindings reviewed-by
- Link to v2: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-tlmm-v2-0-9d4d4386452d@linaro.org

Changes in v2:
- Collect reviewed-bys
- Fixed unevaluatedProperties handling, and dropped the true properties
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-tlmm-v1-0-4e3d84a3a46b@linaro.org

---
Neil Armstrong (3):
      dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer
      pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits
      pinctrl: qcom: Introduce the SM8650 Top Level Mode Multiplexer driver

 .../bindings/pinctrl/qcom,sm8650-tlmm.yaml         |  147 ++
 drivers/pinctrl/qcom/Kconfig.msm                   |    8 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-msm.c                 |   42 +
 drivers/pinctrl/qcom/pinctrl-msm.h                 |    5 +
 drivers/pinctrl/qcom/pinctrl-sm8650.c              | 1762 ++++++++++++++++++++
 6 files changed, 1965 insertions(+)
---
base-commit: ed75ce58b3a55d2cd95b68a06fdb010e1e18d825
change-id: 20231016-topic-sm8650-upstream-tlmm-4ece354ef319

Best regards,
-- 
Neil Armstrong <neil.armstrong@linaro.org>


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2023-11-13 14:46 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-11-06  8:32 [PATCH v3 0/3] pinctrl: qcom: Introduce Pinctrl/GPIO for SM8650 Neil Armstrong
2023-11-06  8:32 ` [PATCH v3 1/3] dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer Neil Armstrong
2023-11-06  8:32 ` [PATCH v3 2/3] pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits Neil Armstrong
2023-11-06  8:32 ` [PATCH v3 3/3] pinctrl: qcom: Introduce the SM8650 Top Level Mode Multiplexer driver Neil Armstrong
2023-11-13 14:06 ` [PATCH v3 0/3] pinctrl: qcom: Introduce Pinctrl/GPIO for SM8650 Linus Walleij
2023-11-13 14:46   ` Neil Armstrong

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.