[PATCH AUTOSEL 4.14 1/9] crypto: pcrypt - Fix hungtask for PADATA_RESET

[PATCH AUTOSEL 4.14 1/9] crypto: pcrypt - Fix hungtask for PADATA_RESET

[Sasha Levin]

From: Lu Jialin <lujialin4@huawei.com>

[ Upstream commit 8f4f68e788c3a7a696546291258bfa5fdb215523 ]

We found a hungtask bug in test_aead_vec_cfg as follows:

INFO: task cryptomgr_test:391009 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Call trace:
 __switch_to+0x98/0xe0
 __schedule+0x6c4/0xf40
 schedule+0xd8/0x1b4
 schedule_timeout+0x474/0x560
 wait_for_common+0x368/0x4e0
 wait_for_completion+0x20/0x30
 wait_for_completion+0x20/0x30
 test_aead_vec_cfg+0xab4/0xd50
 test_aead+0x144/0x1f0
 alg_test_aead+0xd8/0x1e0
 alg_test+0x634/0x890
 cryptomgr_test+0x40/0x70
 kthread+0x1e0/0x220
 ret_from_fork+0x10/0x18
 Kernel panic - not syncing: hung_task: blocked tasks

For padata_do_parallel, when the return err is 0 or -EBUSY, it will call
wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal
case, aead_request_complete() will be called in pcrypt_aead_serial and the
return err is 0 for padata_do_parallel. But, when pinst->flags is
PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it
won't call aead_request_complete(). Therefore, test_aead_vec_cfg will
hung at wait_for_completion(&wait->completion), which will cause
hungtask.

The problem comes as following:
(padata_do_parallel)                 |
    rcu_read_lock_bh();              |
    err = -EINVAL;                   |   (padata_replace)
                                     |     pinst->flags |= PADATA_RESET;
    err = -EBUSY                     |
    if (pinst->flags & PADATA_RESET) |
        rcu_read_unlock_bh()         |
        return err

In order to resolve the problem, we replace the return err -EBUSY with
-EAGAIN, which means parallel_data is changing, and the caller should call
it again.

v3:
remove retry and just change the return err.
v2:
introduce padata_try_do_parallel() in pcrypt_aead_encrypt and
pcrypt_aead_decrypt to solve the hungtask.

Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/pcrypt.c | 4 ++++
 kernel/padata.c | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c
index 62e11835f220e..1e9de81ef84fa 100644
--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -174,6 +174,8 @@ static int pcrypt_aead_encrypt(struct aead_request *req)
 	err = pcrypt_do_parallel(padata, &ctx->cb_cpu, &pencrypt);
 	if (!err)
 		return -EINPROGRESS;
+	if (err == -EBUSY)
+		return -EAGAIN;
 
 	return err;
 }
@@ -218,6 +220,8 @@ static int pcrypt_aead_decrypt(struct aead_request *req)
 	err = pcrypt_do_parallel(padata, &ctx->cb_cpu, &pdecrypt);
 	if (!err)
 		return -EINPROGRESS;
+	if (err == -EBUSY)
+		return -EAGAIN;
 
 	return err;
 }
diff --git a/kernel/padata.c b/kernel/padata.c
index f56ec63f60ba8..82f6d5bf5cb45 100644
--- a/kernel/padata.c
+++ b/kernel/padata.c
@@ -120,7 +120,7 @@ int padata_do_parallel(struct padata_instance *pinst,
 	if (!cpumask_test_cpu(cb_cpu, pd->cpumask.cbcpu))
 		goto out;
 
-	err =  -EBUSY;
+	err = -EBUSY;
 	if ((pinst->flags & PADATA_RESET))
 		goto out;
 
-- 
2.42.0

[PATCH AUTOSEL 4.14 2/9] RDMA/hfi1: Use FIELD_GET() to extract Link Width

[Sasha Levin]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 8bf7187d978610b9e327a3d92728c8864a575ebd ]

Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting, and remove extract_width() which only
wraps that FIELD_GET().

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230919125648.1920-2-ilpo.jarvinen@linux.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/pcie.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index fd9ae23c480ec..c77abf7542e3f 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -45,6 +45,7 @@
  *
  */
 
+#include <linux/bitfield.h>
 #include <linux/pci.h>
 #include <linux/io.h>
 #include <linux/delay.h>
@@ -269,12 +270,6 @@ static u32 extract_speed(u16 linkstat)
 	return speed;
 }
 
-/* return the PCIe link speed from the given link status */
-static u32 extract_width(u16 linkstat)
-{
-	return (linkstat & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
-}
-
 /* read the link status and set dd->{lbus_width,lbus_speed,lbus_info} */
 static void update_lbus_info(struct hfi1_devdata *dd)
 {
@@ -287,7 +282,7 @@ static void update_lbus_info(struct hfi1_devdata *dd)
 		return;
 	}
 
-	dd->lbus_width = extract_width(linkstat);
+	dd->lbus_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, linkstat);
 	dd->lbus_speed = extract_speed(linkstat);
 	snprintf(dd->lbus_info, sizeof(dd->lbus_info),
 		 "PCIe,%uMHz,x%u", dd->lbus_speed, dd->lbus_width);
-- 
2.42.0

[PATCH AUTOSEL 4.14 3/9] fs/jfs: Add check for negative db_l2nbperpage

[Sasha Levin]

From: Juntong Deng <juntong.deng@outlook.com>

[ Upstream commit 525b861a008143048535011f3816d407940f4bfa ]

l2nbperpage is log2(number of blks per page), and the minimum legal
value should be 0, not negative.

In the case of l2nbperpage being negative, an error will occur
when subsequently used as shift exponent.

Syzbot reported this bug:

UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12
shift exponent -16777216 is negative

Reported-by: syzbot+debee9ab7ae2b34b0307@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=debee9ab7ae2b34b0307
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_dmap.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 95e8f031c3f11..070638718be32 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -193,7 +193,8 @@ int dbMount(struct inode *ipbmap)
 	bmp->db_nfree = le64_to_cpu(dbmp_le->dn_nfree);
 
 	bmp->db_l2nbperpage = le32_to_cpu(dbmp_le->dn_l2nbperpage);
-	if (bmp->db_l2nbperpage > L2PSIZE - L2MINBLOCKSIZE) {
+	if (bmp->db_l2nbperpage > L2PSIZE - L2MINBLOCKSIZE ||
+		bmp->db_l2nbperpage < 0) {
 		err = -EINVAL;
 		goto err_release_metapage;
 	}
-- 
2.42.0

[PATCH AUTOSEL 4.14 4/9] fs/jfs: Add validity check for db_maxag and db_agpref

[Sasha Levin]

From: Juntong Deng <juntong.deng@outlook.com>

[ Upstream commit 64933ab7b04881c6c18b21ff206c12278341c72e ]

Both db_maxag and db_agpref are used as the index of the
db_agfree array, but there is currently no validity check for
db_maxag and db_agpref, which can lead to errors.

The following is related bug reported by Syzbot:

UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20
index 7936 is out of range for type 'atomic_t[128]'

Add checking that the values of db_maxag and db_agpref are valid
indexes for the db_agfree array.

Reported-by: syzbot+38e876a8aa44b7115c76@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=38e876a8aa44b7115c76
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_dmap.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 070638718be32..713f11dee52aa 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -208,6 +208,12 @@ int dbMount(struct inode *ipbmap)
 	bmp->db_maxlevel = le32_to_cpu(dbmp_le->dn_maxlevel);
 	bmp->db_maxag = le32_to_cpu(dbmp_le->dn_maxag);
 	bmp->db_agpref = le32_to_cpu(dbmp_le->dn_agpref);
+	if (bmp->db_maxag >= MAXAG || bmp->db_maxag < 0 ||
+		bmp->db_agpref >= MAXAG || bmp->db_agpref < 0) {
+		err = -EINVAL;
+		goto err_release_metapage;
+	}
+
 	bmp->db_aglevel = le32_to_cpu(dbmp_le->dn_aglevel);
 	bmp->db_agheight = le32_to_cpu(dbmp_le->dn_agheight);
 	bmp->db_agwidth = le32_to_cpu(dbmp_le->dn_agwidth);
-- 
2.42.0

[PATCH AUTOSEL 4.14 5/9] jfs: fix array-index-out-of-bounds in dbFindLeaf

[Sasha Levin]

From: Manas Ghandat <ghandatmanas@gmail.com>

[ Upstream commit 22cad8bc1d36547cdae0eef316c47d917ce3147c ]

Currently while searching for dmtree_t for sufficient free blocks there
is an array out of bounds while getting element in tp->dm_stree. To add
the required check for out of bound we first need to determine the type
of dmtree. Thus added an extra parameter to dbFindLeaf so that the type
of tree can be determined and the required check can be applied.

Reported-by: syzbot+aea1ad91e854d0a83e04@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=aea1ad91e854d0a83e04
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_dmap.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 713f11dee52aa..ed7989d7b2ba4 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -100,7 +100,7 @@ static int dbAllocCtl(struct bmap * bmp, s64 nblocks, int l2nb, s64 blkno,
 static int dbExtend(struct inode *ip, s64 blkno, s64 nblocks, s64 addnblocks);
 static int dbFindBits(u32 word, int l2nb);
 static int dbFindCtl(struct bmap * bmp, int l2nb, int level, s64 * blkno);
-static int dbFindLeaf(dmtree_t * tp, int l2nb, int *leafidx);
+static int dbFindLeaf(dmtree_t *tp, int l2nb, int *leafidx, bool is_ctl);
 static int dbFreeBits(struct bmap * bmp, struct dmap * dp, s64 blkno,
 		      int nblocks);
 static int dbFreeDmap(struct bmap * bmp, struct dmap * dp, s64 blkno,
@@ -1798,7 +1798,7 @@ static int dbFindCtl(struct bmap * bmp, int l2nb, int level, s64 * blkno)
 		 * dbFindLeaf() returns the index of the leaf at which
 		 * free space was found.
 		 */
-		rc = dbFindLeaf((dmtree_t *) dcp, l2nb, &leafidx);
+		rc = dbFindLeaf((dmtree_t *) dcp, l2nb, &leafidx, true);
 
 		/* release the buffer.
 		 */
@@ -2045,7 +2045,7 @@ dbAllocDmapLev(struct bmap * bmp,
 	 * free space.  if sufficient free space is found, dbFindLeaf()
 	 * returns the index of the leaf at which free space was found.
 	 */
-	if (dbFindLeaf((dmtree_t *) & dp->tree, l2nb, &leafidx))
+	if (dbFindLeaf((dmtree_t *) &dp->tree, l2nb, &leafidx, false))
 		return -ENOSPC;
 
 	if (leafidx < 0)
@@ -3005,14 +3005,18 @@ static void dbAdjTree(dmtree_t * tp, int leafno, int newval)
  *	leafidx	- return pointer to be set to the index of the leaf
  *		  describing at least l2nb free blocks if sufficient
  *		  free blocks are found.
+ *	is_ctl	- determines if the tree is of type ctl
  *
  * RETURN VALUES:
  *	0	- success
  *	-ENOSPC	- insufficient free blocks.
  */
-static int dbFindLeaf(dmtree_t * tp, int l2nb, int *leafidx)
+static int dbFindLeaf(dmtree_t *tp, int l2nb, int *leafidx, bool is_ctl)
 {
 	int ti, n = 0, k, x = 0;
+	int max_size;
+
+	max_size = is_ctl ? CTLTREESIZE : TREESIZE;
 
 	/* first check the root of the tree to see if there is
 	 * sufficient free space.
@@ -3033,6 +3037,8 @@ static int dbFindLeaf(dmtree_t * tp, int l2nb, int *leafidx)
 			/* sufficient free space found.  move to the next
 			 * level (or quit if this is the last level).
 			 */
+			if (x + n > max_size)
+				return -ENOSPC;
 			if (l2nb <= tp->dmt_stree[x + n])
 				break;
 		}
-- 
2.42.0

[PATCH AUTOSEL 4.14 6/9] jfs: fix array-index-out-of-bounds in diAlloc

[Sasha Levin]

From: Manas Ghandat <ghandatmanas@gmail.com>

[ Upstream commit 05d9ea1ceb62a55af6727a69269a4fd310edf483 ]

Currently there is not check against the agno of the iag while
allocating new inodes to avoid fragmentation problem. Added the check
which is required.

Reported-by: syzbot+79d792676d8ac050949f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=79d792676d8ac050949f
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_imap.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index 12fc016244581..131dce5316ac9 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -1341,7 +1341,7 @@ diInitInode(struct inode *ip, int iagno, int ino, int extno, struct iag * iagp)
 int diAlloc(struct inode *pip, bool dir, struct inode *ip)
 {
 	int rc, ino, iagno, addext, extno, bitno, sword;
-	int nwords, rem, i, agno;
+	int nwords, rem, i, agno, dn_numag;
 	u32 mask, inosmap, extsmap;
 	struct inode *ipimap;
 	struct metapage *mp;
@@ -1377,6 +1377,9 @@ int diAlloc(struct inode *pip, bool dir, struct inode *ip)
 
 	/* get the ag number of this iag */
 	agno = BLKTOAG(JFS_IP(pip)->agstart, JFS_SBI(pip->i_sb));
+	dn_numag = JFS_SBI(pip->i_sb)->bmap->db_numag;
+	if (agno < 0 || agno > dn_numag)
+		return -EIO;
 
 	if (atomic_read(&JFS_SBI(pip->i_sb)->bmap->db_active[agno])) {
 		/*
-- 
2.42.0

[PATCH AUTOSEL 4.14 7/9] ALSA: hda: Fix possible null-ptr-deref when assigning a stream

[Sasha Levin]

From: Cezary Rojewski <cezary.rojewski@intel.com>

[ Upstream commit f93dc90c2e8ed664985e366aa6459ac83cdab236 ]

While AudioDSP drivers assign streams exclusively of HOST or LINK type,
nothing blocks a user to attempt to assign a COUPLED stream. As
supplied substream instance may be a stub, what is the case when
code-loading, such scenario ends with null-ptr-deref.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231006102857.749143-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_stream.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c
index e1472c7ab6c17..609dc5133fba9 100644
--- a/sound/hda/hdac_stream.c
+++ b/sound/hda/hdac_stream.c
@@ -241,8 +241,10 @@ struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus,
 	struct hdac_stream *res = NULL;
 
 	/* make a non-zero unique key for the substream */
-	int key = (substream->pcm->device << 16) | (substream->number << 2) |
-		(substream->stream + 1);
+	int key = (substream->number << 2) | (substream->stream + 1);
+
+	if (substream->pcm)
+		key |= (substream->pcm->device << 16);
 
 	list_for_each_entry(azx_dev, &bus->stream_list, list) {
 		if (azx_dev->direction != substream->stream)
-- 
2.42.0

[PATCH AUTOSEL 4.14 8/9] atm: iphase: Do PCI error checks on own line

[Sasha Levin]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit c28742447ca9879b52fbaf022ad844f0ffcd749c ]

In get_esi() PCI errors are checked inside line-split "if" conditions (in
addition to the file not following the coding style). To make the code in
get_esi() more readable, fix the coding style and use the usual error
handling pattern with a separate variable.

In addition, initialization of 'error' variable at declaration is not
needed.

No functional changes intended.

Link: https://lore.kernel.org/r/20230911125354.25501-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/iphase.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 16eb0266a59ab..7ab8fa3478484 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2290,19 +2290,21 @@ static int get_esi(struct atm_dev *dev)
 static int reset_sar(struct atm_dev *dev)  
 {  
 	IADEV *iadev;  
-	int i, error = 1;  
+	int i, error;
 	unsigned int pci[64];  
 	  
 	iadev = INPH_IA_DEV(dev);  
-	for(i=0; i<64; i++)  
-	  if ((error = pci_read_config_dword(iadev->pci,  
-				i*4, &pci[i])) != PCIBIOS_SUCCESSFUL)  
-  	      return error;  
+	for (i = 0; i < 64; i++) {
+		error = pci_read_config_dword(iadev->pci, i * 4, &pci[i]);
+		if (error != PCIBIOS_SUCCESSFUL)
+			return error;
+	}
 	writel(0, iadev->reg+IPHASE5575_EXT_RESET);  
-	for(i=0; i<64; i++)  
-	  if ((error = pci_write_config_dword(iadev->pci,  
-					i*4, pci[i])) != PCIBIOS_SUCCESSFUL)  
-	    return error;  
+	for (i = 0; i < 64; i++) {
+		error = pci_write_config_dword(iadev->pci, i * 4, pci[i]);
+		if (error != PCIBIOS_SUCCESSFUL)
+			return error;
+	}
 	udelay(5);  
 	return 0;  
 }  
-- 
2.42.0

[PATCH AUTOSEL 4.14 9/9] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()

[Sasha Levin]

From: Wenchao Hao <haowenchao2@huawei.com>

[ Upstream commit 4df105f0ce9f6f30cda4e99f577150d23f0c9c5f ]

fc_lport_ptp_setup() did not check the return value of fc_rport_create()
which can return NULL and would cause a NULL pointer dereference. Address
this issue by checking return value of fc_rport_create() and log error
message on fc_rport_create() failed.

Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231011130350.819571-1-haowenchao2@huawei.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_lport.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 5c0aa2c5fd558..cb22c7afa3cdc 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -251,6 +251,12 @@ static void fc_lport_ptp_setup(struct fc_lport *lport,
 	}
 	mutex_lock(&lport->disc.disc_mutex);
 	lport->ptp_rdata = fc_rport_create(lport, remote_fid);
+	if (!lport->ptp_rdata) {
+		printk(KERN_WARNING "libfc: Failed to setup lport 0x%x\n",
+			lport->port_id);
+		mutex_unlock(&lport->disc.disc_mutex);
+		return;
+	}
 	kref_get(&lport->ptp_rdata->kref);
 	lport->ptp_rdata->ids.port_name = remote_wwpn;
 	lport->ptp_rdata->ids.node_name = remote_wwnn;
-- 
2.42.0