From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Liviu Dudau <liviu.dudau@arm.com>, Sudeep Holla <sudeep.holla@arm.com>, Lorenzo Pieralisi <lpieralisi@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Subject: [PATCH] arm64: dts: juno: align thermal zone names with bindings Date: Sat, 9 Dec 2023 18:16:12 +0100 [thread overview] Message-ID: <20231209171612.250868-1-krzysztof.kozlowski@linaro.org> (raw) Thermal bindings require thermal zone node names to match certain patterns: juno.dtb: thermal-zones: 'big-cluster', 'gpu0', 'gpu1', 'little-cluster', 'pmic', 'soc' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 12 ++++++------ arch/arm64/boot/dts/arm/juno-scmi.dtsi | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 8b4d280b1e7e..b897f5542c0a 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -747,7 +747,7 @@ scpi_sensors0: sensors { }; thermal-zones { - pmic { + pmic-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 0>; @@ -760,7 +760,7 @@ pmic_crit0: trip0 { }; }; - soc { + soc-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 3>; @@ -773,28 +773,28 @@ soc_crit0: trip0 { }; }; - big_cluster_thermal_zone: big-cluster { + big_cluster_thermal_zone: big-cluster-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 21>; status = "disabled"; }; - little_cluster_thermal_zone: little-cluster { + little_cluster_thermal_zone: little-cluster-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 22>; status = "disabled"; }; - gpu0_thermal_zone: gpu0 { + gpu0_thermal_zone: gpu0-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 23>; status = "disabled"; }; - gpu1_thermal_zone: gpu1 { + gpu1_thermal_zone: gpu1-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 24>; diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi index ec85cd2c733c..31929e2377d8 100644 --- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi +++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi @@ -76,27 +76,27 @@ scmi_sensors0: protocol@15 { }; thermal-zones { - pmic { + pmic-thermal { thermal-sensors = <&scmi_sensors0 0>; }; - soc { + soc-thermal { thermal-sensors = <&scmi_sensors0 3>; }; - big-cluster { + big-cluster-thermal { thermal-sensors = <&scmi_sensors0 21>; }; - little-cluster { + little-cluster-thermal { thermal-sensors = <&scmi_sensors0 22>; }; - gpu0 { + gpu0-thermal { thermal-sensors = <&scmi_sensors0 23>; }; - gpu1 { + gpu1-thermal { thermal-sensors = <&scmi_sensors0 24>; }; }; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Liviu Dudau <liviu.dudau@arm.com>, Sudeep Holla <sudeep.holla@arm.com>, Lorenzo Pieralisi <lpieralisi@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Subject: [PATCH] arm64: dts: juno: align thermal zone names with bindings Date: Sat, 9 Dec 2023 18:16:12 +0100 [thread overview] Message-ID: <20231209171612.250868-1-krzysztof.kozlowski@linaro.org> (raw) Thermal bindings require thermal zone node names to match certain patterns: juno.dtb: thermal-zones: 'big-cluster', 'gpu0', 'gpu1', 'little-cluster', 'pmic', 'soc' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 12 ++++++------ arch/arm64/boot/dts/arm/juno-scmi.dtsi | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 8b4d280b1e7e..b897f5542c0a 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -747,7 +747,7 @@ scpi_sensors0: sensors { }; thermal-zones { - pmic { + pmic-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 0>; @@ -760,7 +760,7 @@ pmic_crit0: trip0 { }; }; - soc { + soc-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 3>; @@ -773,28 +773,28 @@ soc_crit0: trip0 { }; }; - big_cluster_thermal_zone: big-cluster { + big_cluster_thermal_zone: big-cluster-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 21>; status = "disabled"; }; - little_cluster_thermal_zone: little-cluster { + little_cluster_thermal_zone: little-cluster-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 22>; status = "disabled"; }; - gpu0_thermal_zone: gpu0 { + gpu0_thermal_zone: gpu0-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 23>; status = "disabled"; }; - gpu1_thermal_zone: gpu1 { + gpu1_thermal_zone: gpu1-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 24>; diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi index ec85cd2c733c..31929e2377d8 100644 --- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi +++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi @@ -76,27 +76,27 @@ scmi_sensors0: protocol@15 { }; thermal-zones { - pmic { + pmic-thermal { thermal-sensors = <&scmi_sensors0 0>; }; - soc { + soc-thermal { thermal-sensors = <&scmi_sensors0 3>; }; - big-cluster { + big-cluster-thermal { thermal-sensors = <&scmi_sensors0 21>; }; - little-cluster { + little-cluster-thermal { thermal-sensors = <&scmi_sensors0 22>; }; - gpu0 { + gpu0-thermal { thermal-sensors = <&scmi_sensors0 23>; }; - gpu1 { + gpu1-thermal { thermal-sensors = <&scmi_sensors0 24>; }; }; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-12-09 17:16 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-12-09 17:16 Krzysztof Kozlowski [this message] 2023-12-09 17:16 ` [PATCH] arm64: dts: juno: align thermal zone names with bindings Krzysztof Kozlowski 2023-12-11 10:27 ` Liviu Dudau 2023-12-11 10:27 ` Liviu Dudau 2023-12-13 11:57 ` Sudeep Holla 2023-12-13 11:57 ` Sudeep Holla 2024-01-02 18:09 ` Rob Herring 2024-01-02 18:09 ` Rob Herring 2024-01-03 10:13 ` Krzysztof Kozlowski 2024-01-03 10:13 ` Krzysztof Kozlowski 2024-01-03 13:39 ` Krzysztof Kozlowski 2024-01-03 13:39 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231209171612.250868-1-krzysztof.kozlowski@linaro.org \ --to=krzysztof.kozlowski@linaro.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=liviu.dudau@arm.com \ --cc=lpieralisi@kernel.org \ --cc=robh+dt@kernel.org \ --cc=sudeep.holla@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.