[PATCH v2 0/2] MediaTek: Introduce MT8395 Radxa NIO 12L devicetree

[PATCH v2 0/2] MediaTek: Introduce MT8395 Radxa NIO 12L devicetree

[AngeloGioacchino Del Regno]

Changes in v2:
 - Squashed device tree bringup per-device commits into just one
 - Removed dependency on MT6360 PD_IRQB removal series

This series adds a device tree for the Radxa NIO 12L SBC, powered by
the MediaTek Genio 1200 (MT8395).
Not all features of this board are included in this first series but
it's already quite usable, as the eMMC internal storage works and can
be used to boot the system (as much as MicroSD external storage), the
connectivity via ethernet and WiFi (PCI-Express) are working as well.

The two I2C, two SPI and the two UART ports are also ok.

What is missing (and what's next...!):
 - UFS storage is not working yet (but eMMC works)
 - Type-C role switching is not yet implemented, driver is there but
   mt8195.dtsi has no MTU3 yet, needs some research to avoid breaking
   compatibility with MT8195 Chromebooks
 - HDMI Input port: no driver yet
 - HDMI Output (from SoC HDMI IP): no driver yet
 - Audio (sound card driver needs some love)
 - MIPI Camera
 - System LEDs
 - "F15" Button

Cheers,
Angelo

AngeloGioacchino Del Regno (2):
  dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board
    compatible
  arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board

 .../devicetree/bindings/arm/mediatek.yaml     |   1 +
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 .../dts/mediatek/mt8395-radxa-nio-12l.dts     | 825 ++++++++++++++++++
 3 files changed, 827 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts

-- 
2.43.0

[PATCH v2 0/2] MediaTek: Introduce MT8395 Radxa NIO 12L devicetree

[AngeloGioacchino Del Regno]

Changes in v2:
 - Squashed device tree bringup per-device commits into just one
 - Removed dependency on MT6360 PD_IRQB removal series

This series adds a device tree for the Radxa NIO 12L SBC, powered by
the MediaTek Genio 1200 (MT8395).
Not all features of this board are included in this first series but
it's already quite usable, as the eMMC internal storage works and can
be used to boot the system (as much as MicroSD external storage), the
connectivity via ethernet and WiFi (PCI-Express) are working as well.

The two I2C, two SPI and the two UART ports are also ok.

What is missing (and what's next...!):
 - UFS storage is not working yet (but eMMC works)
 - Type-C role switching is not yet implemented, driver is there but
   mt8195.dtsi has no MTU3 yet, needs some research to avoid breaking
   compatibility with MT8195 Chromebooks
 - HDMI Input port: no driver yet
 - HDMI Output (from SoC HDMI IP): no driver yet
 - Audio (sound card driver needs some love)
 - MIPI Camera
 - System LEDs
 - "F15" Button

Cheers,
Angelo

AngeloGioacchino Del Regno (2):
  dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board
    compatible
  arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board

 .../devicetree/bindings/arm/mediatek.yaml     |   1 +
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 .../dts/mediatek/mt8395-radxa-nio-12l.dts     | 825 ++++++++++++++++++
 3 files changed, 827 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts

-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/2] dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board compatible

[AngeloGioacchino Del Regno]

Add a board compatible for the Radxa NIO 12L, based on the MediaTek
MT8395 SoC.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 6f2f64ae76fc..168538887fee 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -287,6 +287,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8395-evk
+              - radxa,nio-12l
           - const: mediatek,mt8395
           - const: mediatek,mt8195
       - items:
-- 
2.43.0

[PATCH v2 1/2] dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board compatible

[AngeloGioacchino Del Regno]

Add a board compatible for the Radxa NIO 12L, based on the MediaTek
MT8395 SoC.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 6f2f64ae76fc..168538887fee 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -287,6 +287,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8395-evk
+              - radxa,nio-12l
           - const: mediatek,mt8395
           - const: mediatek,mt8195
       - items:
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board

[AngeloGioacchino Del Regno]

Add a device tree for the Radxa NIO 12L SBC, powered by the MediaTek
MT8395 Genio 1200 SoC.

This board features:
 * MT6359 + MT6360 PMICs at I2C-6
   - Regulators, battery charger, TypeC Port Controller Interface
   - Audio through 3.5mm jack (2CH out, 1CH in)
 * Two MT6315 PMICs over SPMI
   - CPU-Big and GPU Core regulators
 * Network Connectivity
   - Realtek RTL8211FD MDIO PHY/Transceiver, 10/100/1000M Ethernet
   - MT7921E WiFi (PCIe1) / Bluetooth (USB 2.0) combo chip
 * Storage
   - On-board UFS storage
   - On-board eMMC on MMC0 controller
   - MicroSD card slot on MMC1 controller
 * Other connectivity
   - 1x USB Type-C Charging/Power only port
   - 1x USB 3.2 SuperSpeed Type-C OTG+DisplayPort mode
     - Muxed by ITE IT5205 Alternate Mode Passive MUX
   - 4x USB 3.0 Type-A ports on VL805 USB Hub (PCIe0)
   - 1x HDMI IN port
   - 1x HDMI OUT port
   - 1x MIPI DSI (Display) port
   - 2x MIPI CSI (Camera) ports
 * 40-pin Expansion Header
   - Two UART ports
   - I2C, SPI busses
   - I2S for external audio chips
   - ADC
   - GPIOs

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 .../dts/mediatek/mt8395-radxa-nio-12l.dts     | 825 ++++++++++++++++++
 2 files changed, 826 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 1e6f91731e92..fdd8f4a58003 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -63,4 +63,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
new file mode 100644
index 000000000000..e5d9b671a405
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -0,0 +1,825 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Radxa Limited
+ * Copyright (C) 2024 Collabora Ltd.
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Radxa NIO 12L";
+	chassis-type = "embedded";
+	compatible = "radxa,nio-12l", "mediatek,mt8395", "mediatek,mt8195";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+		i2c2 = &i2c4;
+		i2c3 = &i2c0;
+		i2c4 = &i2c1;
+		ethernet0 = &eth;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x1 0x0>;
+	};
+
+	wifi_vreg: regulator-wifi-3v3-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3_en";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 67 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_vreg_pins>;
+		vin-supply = <&vsys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	vsys_buck: regulator-vsys-buck {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_buck";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	/* Rail from power-only "TYPE C DC" port */
+	vcc5v0_vsys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			reg = <0 0x43200000 0 0xc00000>;
+			no-map;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			reg = <0 0x54600000 0x0 0x200000>;
+			no-map;
+		};
+
+		afe_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+};
+
+&eth {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&rgmii_phy>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 20000 100000>;
+	status = "okay";
+
+	mdio {
+		rgmii_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+
+		mode-switch;
+		orientation-switch;
+
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+
+		port {
+			it5205_sbu_mux: endpoint {
+				remote-endpoint = <&typec_con_mux>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* I2C4 exposed at 39-pins MIPI-LCD connector */
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		pinctrl-0 = <&mt6360_pins>;
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN1-supply = <&vsys_buck>;
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "ext_lcd_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo6"; /* Test point */
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+
+		typec {
+			compatible = "mediatek,mt6360-tcpc";
+			interrupts-extended = <&pio 100 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "PD_IRQB";
+
+			connector {
+				compatible = "usb-c-connector";
+				label = "USB-C";
+				data-role = "dual";
+				op-sink-microwatt = <10000000>;
+				power-role = "dual";
+				try-power-role = "sink";
+
+				source-pdos = <PDO_FIXED(5000, 1000,
+							 PDO_FIXED_DUAL_ROLE |
+							 PDO_FIXED_DATA_SWAP)>;
+				sink-pdos = <PDO_FIXED(5000, 3000,
+						       PDO_FIXED_DUAL_ROLE |
+						       PDO_FIXED_DATA_SWAP)>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						typec_con_hs: endpoint {
+							remote-endpoint = <&mtu3_hs0_role_sw>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						typec_con_mux: endpoint {
+							remote-endpoint = <&it5205_sbu_mux>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+/* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	hs400-ds-delay = <0x14c11>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+/* MMC1 Controller: MicroSD card slot */
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>;
+	pinctrl-1 = <&mmc1_default_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vaud18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+/* For USB Hub */
+&mt6359_vcamio_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&pio {
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			bias-disable;
+			input-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength = <6>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <6>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+			input-enable;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+	};
+
+	mmc1_pins_detect: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	mt6360_pins: mt6360-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
+				 <PINMUX_GPIO101__FUNC_GPIO101>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_pins: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
+				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
+				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
+				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+
+	wifi_vreg_pins: wifi-vreg-pins {
+		pins-wifi-pmu-en {
+			pinmux = <PINMUX_GPIO65__FUNC_GPIO65>;
+			output-high;
+		};
+
+		pins-wifi-vreg-en {
+			pinmux = <PINMUX_GPIO67__FUNC_GPIO67>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "okay";
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&spi1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spi2 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ssusb0 {
+	role-switch-default-mode = "host";
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	port {
+		mtu3_hs0_role_sw: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci0 {
+	vbus-supply = <&otg_vbus_regulator>;
+	status = "okay";
+};
+
+&xhci1 {
+	/* MT7921's USB Bluetooth has issues with USB2 LPM */
+	usb2-lpm-disable;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&vsys>;
+	status = "okay";
+};
+
+&xhci2 {
+	vbus-supply = <&vsys>;
+	status = "okay";
+};
-- 
2.43.0

[PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board

[AngeloGioacchino Del Regno]

Add a device tree for the Radxa NIO 12L SBC, powered by the MediaTek
MT8395 Genio 1200 SoC.

This board features:
 * MT6359 + MT6360 PMICs at I2C-6
   - Regulators, battery charger, TypeC Port Controller Interface
   - Audio through 3.5mm jack (2CH out, 1CH in)
 * Two MT6315 PMICs over SPMI
   - CPU-Big and GPU Core regulators
 * Network Connectivity
   - Realtek RTL8211FD MDIO PHY/Transceiver, 10/100/1000M Ethernet
   - MT7921E WiFi (PCIe1) / Bluetooth (USB 2.0) combo chip
 * Storage
   - On-board UFS storage
   - On-board eMMC on MMC0 controller
   - MicroSD card slot on MMC1 controller
 * Other connectivity
   - 1x USB Type-C Charging/Power only port
   - 1x USB 3.2 SuperSpeed Type-C OTG+DisplayPort mode
     - Muxed by ITE IT5205 Alternate Mode Passive MUX
   - 4x USB 3.0 Type-A ports on VL805 USB Hub (PCIe0)
   - 1x HDMI IN port
   - 1x HDMI OUT port
   - 1x MIPI DSI (Display) port
   - 2x MIPI CSI (Camera) ports
 * 40-pin Expansion Header
   - Two UART ports
   - I2C, SPI busses
   - I2S for external audio chips
   - ADC
   - GPIOs

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 .../dts/mediatek/mt8395-radxa-nio-12l.dts     | 825 ++++++++++++++++++
 2 files changed, 826 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 1e6f91731e92..fdd8f4a58003 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -63,4 +63,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
new file mode 100644
index 000000000000..e5d9b671a405
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -0,0 +1,825 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Radxa Limited
+ * Copyright (C) 2024 Collabora Ltd.
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Radxa NIO 12L";
+	chassis-type = "embedded";
+	compatible = "radxa,nio-12l", "mediatek,mt8395", "mediatek,mt8195";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+		i2c2 = &i2c4;
+		i2c3 = &i2c0;
+		i2c4 = &i2c1;
+		ethernet0 = &eth;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x1 0x0>;
+	};
+
+	wifi_vreg: regulator-wifi-3v3-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3_en";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 67 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_vreg_pins>;
+		vin-supply = <&vsys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	vsys_buck: regulator-vsys-buck {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_buck";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	/* Rail from power-only "TYPE C DC" port */
+	vcc5v0_vsys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			reg = <0 0x43200000 0 0xc00000>;
+			no-map;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			reg = <0 0x54600000 0x0 0x200000>;
+			no-map;
+		};
+
+		afe_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+};
+
+&eth {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&rgmii_phy>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 20000 100000>;
+	status = "okay";
+
+	mdio {
+		rgmii_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+
+		mode-switch;
+		orientation-switch;
+
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+
+		port {
+			it5205_sbu_mux: endpoint {
+				remote-endpoint = <&typec_con_mux>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* I2C4 exposed at 39-pins MIPI-LCD connector */
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		pinctrl-0 = <&mt6360_pins>;
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN1-supply = <&vsys_buck>;
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "ext_lcd_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo6"; /* Test point */
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+
+		typec {
+			compatible = "mediatek,mt6360-tcpc";
+			interrupts-extended = <&pio 100 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "PD_IRQB";
+
+			connector {
+				compatible = "usb-c-connector";
+				label = "USB-C";
+				data-role = "dual";
+				op-sink-microwatt = <10000000>;
+				power-role = "dual";
+				try-power-role = "sink";
+
+				source-pdos = <PDO_FIXED(5000, 1000,
+							 PDO_FIXED_DUAL_ROLE |
+							 PDO_FIXED_DATA_SWAP)>;
+				sink-pdos = <PDO_FIXED(5000, 3000,
+						       PDO_FIXED_DUAL_ROLE |
+						       PDO_FIXED_DATA_SWAP)>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						typec_con_hs: endpoint {
+							remote-endpoint = <&mtu3_hs0_role_sw>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						typec_con_mux: endpoint {
+							remote-endpoint = <&it5205_sbu_mux>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+/* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	hs400-ds-delay = <0x14c11>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+/* MMC1 Controller: MicroSD card slot */
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>;
+	pinctrl-1 = <&mmc1_default_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vaud18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+/* For USB Hub */
+&mt6359_vcamio_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&pio {
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			bias-disable;
+			input-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength = <6>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <6>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+			input-enable;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+	};
+
+	mmc1_pins_detect: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	mt6360_pins: mt6360-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
+				 <PINMUX_GPIO101__FUNC_GPIO101>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_pins: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
+				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
+				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
+				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+
+	wifi_vreg_pins: wifi-vreg-pins {
+		pins-wifi-pmu-en {
+			pinmux = <PINMUX_GPIO65__FUNC_GPIO65>;
+			output-high;
+		};
+
+		pins-wifi-vreg-en {
+			pinmux = <PINMUX_GPIO67__FUNC_GPIO67>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "okay";
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&spi1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spi2 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ssusb0 {
+	role-switch-default-mode = "host";
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	port {
+		mtu3_hs0_role_sw: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci0 {
+	vbus-supply = <&otg_vbus_regulator>;
+	status = "okay";
+};
+
+&xhci1 {
+	/* MT7921's USB Bluetooth has issues with USB2 LPM */
+	usb2-lpm-disable;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&vsys>;
+	status = "okay";
+};
+
+&xhci2 {
+	vbus-supply = <&vsys>;
+	status = "okay";
+};
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board

[kernel test robot]

Hi AngeloGioacchino,

kernel test robot noticed the following build errors:

[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v6.8-rc2 next-20240202]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/AngeloGioacchino-Del-Regno/dt-bindings-arm64-mediatek-Add-MT8395-Radxa-NIO-12L-board-compatible/20240202-195207
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20240202114821.79227-3-angelogioacchino.delregno%40collabora.com
patch subject: [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
config: arm64-defconfig (https://download.01.org/0day-ci/archive/20240204/202402041754.SHJCpnEP-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240204/202402041754.SHJCpnEP-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202402041754.SHJCpnEP-lkp@intel.com/

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts:791.1-8 Label or path ssusb0 not found
>> Error: arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts:804.1-8 Label or path ssusb2 not found
   FATAL ERROR: Syntax error parsing input tree

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board

[kernel test robot]

Hi AngeloGioacchino,

kernel test robot noticed the following build errors:

[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v6.8-rc2 next-20240202]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/AngeloGioacchino-Del-Regno/dt-bindings-arm64-mediatek-Add-MT8395-Radxa-NIO-12L-board-compatible/20240202-195207
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20240202114821.79227-3-angelogioacchino.delregno%40collabora.com
patch subject: [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
config: arm64-defconfig (https://download.01.org/0day-ci/archive/20240204/202402041754.SHJCpnEP-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240204/202402041754.SHJCpnEP-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202402041754.SHJCpnEP-lkp@intel.com/

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts:791.1-8 Label or path ssusb0 not found
>> Error: arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts:804.1-8 Label or path ssusb2 not found
   FATAL ERROR: Syntax error parsing input tree

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board

[AngeloGioacchino Del Regno]

Il 04/02/24 10:31, kernel test robot ha scritto:
> Hi AngeloGioacchino,
> 
> kernel test robot noticed the following build errors:
> 
> [auto build test ERROR on robh/for-next]
> [also build test ERROR on linus/master v6.8-rc2 next-20240202]

Whoever is reading this... yes that's all expected; this series depends on a commit
that was already picked in the mediatek trees.

https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux.git/commit/?h=v6.8-next/dts64&id=d464e09e60f024aea0de7adb680a8e8582ab8df8

Regards,
Angelo

> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
> 
> url:    https://github.com/intel-lab-lkp/linux/commits/AngeloGioacchino-Del-Regno/dt-bindings-arm64-mediatek-Add-MT8395-Radxa-NIO-12L-board-compatible/20240202-195207
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
> patch link:    https://lore.kernel.org/r/20240202114821.79227-3-angelogioacchino.delregno%40collabora.com
> patch subject: [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
> config: arm64-defconfig (https://download.01.org/0day-ci/archive/20240204/202402041754.SHJCpnEP-lkp@intel.com/config)
> compiler: aarch64-linux-gcc (GCC) 13.2.0
> reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240204/202402041754.SHJCpnEP-lkp@intel.com/reproduce)
> 
> If you fix the issue in a separate patch/commit (i.e. not just a new version of
> the same patch/commit), kindly add following tags
> | Reported-by: kernel test robot <lkp@intel.com>
> | Closes: https://lore.kernel.org/oe-kbuild-all/202402041754.SHJCpnEP-lkp@intel.com/
> 
> All errors (new ones prefixed by >>):
> 
>>> Error: arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts:791.1-8 Label or path ssusb0 not found
>>> Error: arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts:804.1-8 Label or path ssusb2 not found
>     FATAL ERROR: Syntax error parsing input tree
> 

Re: [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board

[AngeloGioacchino Del Regno]

Il 04/02/24 10:31, kernel test robot ha scritto:
> Hi AngeloGioacchino,
> 
> kernel test robot noticed the following build errors:
> 
> [auto build test ERROR on robh/for-next]
> [also build test ERROR on linus/master v6.8-rc2 next-20240202]

Whoever is reading this... yes that's all expected; this series depends on a commit
that was already picked in the mediatek trees.

https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux.git/commit/?h=v6.8-next/dts64&id=d464e09e60f024aea0de7adb680a8e8582ab8df8

Regards,
Angelo

> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
> 
> url:    https://github.com/intel-lab-lkp/linux/commits/AngeloGioacchino-Del-Regno/dt-bindings-arm64-mediatek-Add-MT8395-Radxa-NIO-12L-board-compatible/20240202-195207
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
> patch link:    https://lore.kernel.org/r/20240202114821.79227-3-angelogioacchino.delregno%40collabora.com
> patch subject: [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
> config: arm64-defconfig (https://download.01.org/0day-ci/archive/20240204/202402041754.SHJCpnEP-lkp@intel.com/config)
> compiler: aarch64-linux-gcc (GCC) 13.2.0
> reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240204/202402041754.SHJCpnEP-lkp@intel.com/reproduce)
> 
> If you fix the issue in a separate patch/commit (i.e. not just a new version of
> the same patch/commit), kindly add following tags
> | Reported-by: kernel test robot <lkp@intel.com>
> | Closes: https://lore.kernel.org/oe-kbuild-all/202402041754.SHJCpnEP-lkp@intel.com/
> 
> All errors (new ones prefixed by >>):
> 
>>> Error: arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts:791.1-8 Label or path ssusb0 not found
>>> Error: arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts:804.1-8 Label or path ssusb2 not found
>     FATAL ERROR: Syntax error parsing input tree
> 



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel